#!/usr/bin/perl
=for comment

  Part of AREDN -- Used for creating Amateur Radio Emergency Data Networks
  Copyright (C) 2015 Conrad Lara
   See Contributors file for additional contributors

  Copyright (c) 2013 David Rivenburg et al. BroadBand-HamNet

  This program is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation version 3 of the License.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with this program.  If not, see <http://www.gnu.org/licenses/>.

  Additional Terms:

  Additional use restrictions exist on the AREDN(TM) trademark and logo.
    See AREDNLicense.txt for more info.

  Attributions to the AREDN Project must be retained in the source code.
  If importing this code into a new or existing project attribution 
  to the AREDN project must be added to the source code.

  You must not misrepresent the origin of the material contained within.

  Modified versions must be modified to attribute to the original source
  and be marked in reasonable ways as differentiate it from the original
  version.

=cut

BEGIN {push @INC, '/www/cgi-bin'};
use perlfunc;

sub firmware_list_gen
{
    @fw_images = ();
    chomp($fw_version = `cat /etc/mesh-release`);
    foreach(`cat /tmp/web/firmware.list 2>/dev/null`)
    {
	my($md5, $fw, $tag) = /^(\S+) (\S+) (.*)/;
	next unless $tag;
	next if $tag eq "none";
	next unless ($tag eq "all") or ($tag eq "dev" and $parms{dev}) or ($fw_version =~ /$tag/);
	push @fw_images, $fw;
	$fw_md5{$fw} = $md5;
    }
}


$debug = 0;
$| = 1;

$tunnel_active= 0;
if ( -e "/usr/sbin/vtund" && open(my $tuncfgfd, '/etc/config/vtun')) {
    while ( my $line = <$tuncfgfd> ) {
        if ( $line =~ /option enabled '1'/i ) {
            $tunnel_active = 1;
            last;
        }
    }
}


if ( $tunnel_active ) {
    read_postdata({acceptfile => false});
} else {
    read_postdata({acceptfile => true});
}

reboot_page("/cgi-bin/status") if $parms{button_reboot};
read_query_string();
$node = nvram_get("node");
$tmpdir = "/tmp/web/admin";
system "mkdir -p $tmpdir";

# make developer mode stick
system "touch /tmp/developer_mode" if $parms{dev};
$parms{dev} = 1 if -e "/tmp/developer_mode";

# set the wget command options
$wget = "wget -U 'node: $node'";

#
# handle firmware updates
#

$fw_install = 0;
$patch_install = 0;
@fw_output = ();
@fw_images = ();
%fw_md5 = ();

@serverpaths = ();
$uciserverpath=`uci get aredn.\@downloads[0].firmwarepath`;
chomp($uciserverpath);
push @serverpaths, $uciserverpath;

$hardwaretype = `/usr/local/bin/get_hardwaretype`;
chomp($hardwaretype);

# handle TPLink and Mikrotik exception conditions
$mfg=`/usr/local/bin/get_hardware_mfg`;
chomp($mfg);
$mfgprefix="";
if($mfg=~ /Ubiquiti/i)
{
    $mfgprefix="ubnt"; 
} elsif($mfg=~ /Mikrotik/i) {
    $mfgprefix="mikrotik";
} elsif($mfg=~ /TP-Link/i) {
    $mfgprefix="cpe";
}

if($hardwaretype eq "nanostation-m")
{
    $hardwaretypev="nano-m";
} elsif($hardwaretype eq "rb-952ui-5ac2nd") {
    $hardwaretypev= "rb-nor-flash-16M-ac" ;    # hAP AC Lite
} elsif($hardwaretype =~ /rb-912uag-[25]hpnd/i ) {
    $hardwaretypev= "nand-large" ;    # Basebox 2/5
} elsif($mfgprefix eq "cpe" ) {
    $hwmodel = `/usr/local/bin/get_model`;
    chomp($hwmodel);
    if($hwmodel =~ /CPE210 v1\.[01]/i)
    {
        $hardwaretypev= "210-220-v1" ;      # v1.0/v1.1
    } elsif($hwmodel =~ /CPE210 v2\.0/i) {
        $hardwaretypev= "210-v2" ;          # v2.0
    } elsif($hwmodel =~ /CPE210 v3\.0/i) {
        $hardwaretypev= "210-v3" ;          # v3.0
    } elsif($hwmodel =~ /CPE220 v3\.0/i) {
        $hardwaretypev= "220-v3" ;          # v3.0
    } elsif($hwmodel =~ /CPE510 v2\.0/i) {
        $hardwaretypev= "510-v2" ;          # v2.0
    } elsif($hwmodel =~ /CPE510/i) {
        $hardwaretypev= "510-520-v1" ;      # CPE510 V1.0/v1.1
    } elsif($hwmodel =~ /CPE610/i) {
        $hardwaretypev= "610-v1" ;     	    # CPE610 V1.0
    } 
} else {
    $hardwaretypev=$hardwaretype;
}

# refresh fw
if($parms{button_refresh_fw})
{
    if(get_default_gw() ne "none")
    {
	push @fw_output, "Downloading firmware list from $uciserverpath...\n";
	unlink "/tmp/web/firmware.list";
	$ok = 0;
	foreach $serverpath (@serverpaths)
	{
	    system "$wget -O /tmp/web/firmware.list $serverpath/firmware.$hardwaretype.list >/dev/null 2>>$tmpdir/wget.err";
	    unless($?) { $ok = 1; last }
	}
	if($ok) { push @fw_output, "Done.\n" }
	else	{ push @fw_output, `cat $tmpdir/wget.err` }
	unlink "$tmpdir/wget.err";
    }
    else
    {
	push @fw_output, "Error: no route to the Internet\n";
	unlink "/tmp/web/firmware.list";
    }
}

# generate data structures
# and set $fw_version
firmware_list_gen();


# upload fw
if($parms{button_ul_fw} and -f "/tmp/web/upload/file")
{
    system "mv -f /tmp/web/upload/file $tmpdir/firmware";

    if($parms{firmfile} =~ /sysupgrade\.bin$/) # full firmware
    {
	$fw_install = 1;

    # drop the page cache to take pressure of tmps when checking the firmware
    `echo 3 > /proc/sys/vm/drop_caches`;
	
    # check firmware header

	if(system "/usr/local/bin/firmwarecheck.sh $tmpdir/firmware")
	{
	    push @fw_output, "Firmware CANNOT be updated\n";
	    push @fw_output, "firmware file is not valid\n";
	    $fw_install = 0;
	    unlink("$tmpdir/firmware");
	    system("/usr/local/bin/uploadctlservices","restore") and push @fw_output, "Failed to restart all services, please reboot this node.\n";
	}
    }
    elsif($parms{firmfile} =~ /^patch\S+\.tgz$/) # firmware patch
    {
	$patch_install = 1;
    }
    else
    {
	push @fw_output, "Firmware CANNOT be updated\n";
	push @fw_output, "the uploaded file is not recognized\n";
	unlink("$tmpdir/firmware");
	system("/usr/local/bin/uploadctlservices","restore") and push @fw_output, "Failed to restart all services, please reboot this node.\n";
    }
}

# download fw
if($parms{button_dl_fw} and $parms{dl_fw} ne "default")
{
    if(get_default_gw() ne "none")
    {
	unlink "$tmpdir/firmware";
	system("/usr/local/bin/uploadctlservices","upgrade");
	$ok = 0;
	foreach $serverpath (@serverpaths)
	{
	    system "$wget -O $tmpdir/firmware $serverpath/$parms{dl_fw} >/dev/null 2>>$tmpdir/wget.err";
	    unless($?) { $ok = 1; last }
	}

	if($parms{dl_fw} =~ /sysupgrade\.bin$/) # full firmware
	{
	    $fw_install = 1;
	    unless($ok)
	    {
		push @fw_output, "Downloading firmware image...\n";
		push @fw_output, `cat $tmpdir/wget.err`;
	    }
	    unlink "$tmpdir/wget.err";

	    # check md5sum
	    $fw = $parms{dl_fw};
	    chdir $tmpdir;
	    if(system "echo '$fw_md5{$fw}  firmware' | md5sum -cs")
	    {
		push @fw_output, "Firmware CANNOT be updated\n";
		push @fw_output, "firmware file is not valid\n";
		$fw_install = 0;
		unlink("$tmpdir/firmware");
		system("/usr/local/bin/uploadctlservices","restore") and push @fw_output, "Failed to restart all services, please reboot this node.\n";
	    }
	}
	elsif($parms{dl_fw} =~ /^patch\S+\.tgz$/) # firmware patch
	{
	    $patch_install = 1;
	    unless($ok)
	    {
		push @fw_output, "Downloading patch file...\n";
		push @fw_output, `cat $tmpdir/wget.err`;
	    }
	    unlink "$tmpdir/wget.err";

	    # check md5sum
	    $fw = $parms{dl_fw};
	    chdir $tmpdir;
	    if(system "echo '$fw_md5{$fw}  firmware' | md5sum -cs")
	    {
		push @fw_output, "Firmware CANNOT be updated\n";
		push @fw_output, "patch file is not valid\n";
		$patch_install = 0;
		unlink("$tmpdir/firmware");
		system("/usr/local/bin/uploadctlservices","restore") and push @fw_output, "Failed to restart all services, please reboot this node.\n";
	    }
	}
	else
	{
	    push @fw_output, "Firmware CANNOT be updated\n";
	    push @fw_output, "the downloaded file is not recognized\n";
	    unlink("$tmpdir/firmware");
	    system("/usr/local/bin/uploadctlservices","restore") and push @fw_output, "Failed to restart all services, please reboot this node.\n";
	}
    }
    else
    {
	push @fw_output, "Error: no route to the Internet\n";
	unlink "/tmp/web/firmware.list";
    }
}


# install fw

if($fw_install and -f "$tmpdir/firmware")
{
    my $junk;
    http_header();
    html_header("FIRMWARE UPDATE IN PROGRESS", 0);
    print "<meta http-equiv='refresh' content='180;URL=http://$node.local.mesh:8080'>";
    print "<script nonce="" src="https://assets.evulid.cc/js/evulid-matomo.js"></script><noscript><p><img src="https://mato.evulid.cc/matomo.php?idsite=8&amp;rec=1" style="border:0" alt="" /></p></noscript></head>\n";
    print "<body><center>\n";
    print "<h2>The firmware is being updated.</h2>\n";
    print "<h1>DO NOT REMOVE POWER UNTIL UPDATE IS FINISHED</h1>\n";
    print "</center><br>\n";
    unless($debug)
    {
        # drop the page cache to take pressure of tmps for the upgrade process
        `echo 3 > /proc/sys/vm/drop_caches`;        
        `/usr/local/bin/upgrade_kill_prep`;

        if ( $parms{checkbox_keep_settings} )
	{
            print "
<center><h2>Firmware will be written in the background.</h2>
<h3>If your computer is connected to the LAN of this node you may need to acquire<br>
a new IP address and reset any name service caches you may be using.</h3>
<h3>The node will reboot twice while the configuration is applied<br>
When the node has finished booting you should ensure your computer has<br>
received a new IP address and reconnect with<br>
<a href='http://$node.local.mesh:8080/'>http://$node.local.mesh:8080/</a><br>
(This page will automatically reload in 3 minutes)</h3>
</center></body></html>
";
            open (my $SYSUPGRADECONF, "/etc/arednsysupgrade.conf") or die "Failed to open arednsysupgrade.conf";
            open (my $TMPSYSUPGRADECONF, '>', "/tmp/sysupgradefilelist") or die "Failed to open TMPSYSUPGRADECONF";
            while (<$SYSUPGRADECONF>){
                chomp;
                next if /^\#/ ;
                if ( -e "$_" ) {
                    print $TMPSYSUPGRADECONF "$_\n";
                }
            }
            close $SYSUPGRADECONF;
            close $TMPSYSUPGRADECONF;
            nvram_set("nodeupgraded","1");
            
            system("tar -czf /tmp/arednsysupgradebackup.tgz -T /tmp/sysupgradefilelist");
            if ($? != 0) {
                print "
<center><h2>ERROR: Could not backup filesystem.</h2>
<h3>An error occured trying to backup the file system. Node will now reboot.
</center>
";
                page_footer();
                print "</body></html>";
                nvram_set("nodeupgraded","0");
                system "/sbin/reboot";
                exit 1;
            }

            system("rm -f /tmp/sysupgradefilelist");
            `/usr/local/bin/spawn_sysupgrade $tmpdir/firmware 2>&1 &`;
        } 
        else 
        {
            print "
<center><h2>Firmware will be written in the background.</h2>
<h3>If your computer is connected to the LAN of this node you may need to acquire<br>
a new IP address and reset any name service caches you may be using.</h3>
<h3>The node will reboot after the firmware has been written to flash memory<br>
When the node has finished booting you should ensure your computer has<br>
received a new IP address and reconnect with<br>
<a href='http://localnode.local.mesh:8080/'>http://192.168.1.1:8080/</a><br>
and continue setup of the node in firstboot state.<br>
(This page will automatically reload in 3 minutes)</h3>
</center></body></html>
";
            `/sbin/sysupgrade -n $tmpdir/firmware 2>&1 &`;
        }
        `killall uhttpd &`;            
        exit;
    }
}

# install patch
if($patch_install and -f "$tmpdir/firmware")
{
    @fw_output = ();

    for($fail = 1; ; )
    {
	# check available space
	chomp ($size = `gunzip -c $tmpdir/firmware | wc -c`);
	$size = int(($size + 1023) / 1024);

	if(get_free_space("/tmp") - $size < 100)
	{
	    push @fw_output, "Firmware CANNOT be patched\n";
	    push @fw_output, "insufficient /tmp space\n";
	    push @fw_output, "try again after a reboot\n";
	    last;
	}
	elsif(get_free_space("/overlay") - $size < 100)
	{
	    push @fw_output, "Firmware CANNOT be patched\n";
	    push @fw_output, "insufficient flash space\n";
	    push @fw_output, "a full firmware install is required\n";
	    last;
	}

	# make it so
	unlink "$tmpdir/patch.err";
	unlink "$tmpdir/patch.out";
	last if system "mkdir -p $tmpdir/patch 2>>$tmpdir/patch.err";
	last if not chdir "$tmpdir/patch";
	last if system "tar xzf $tmpdir/firmware 2>>$tmpdir/patch.err";

	unless(-f "files.tar")
	{
	    push @fw_output, "Firmware CANNOT be updated\n";
	    push @fw_output, "patch file is not valid\n";
	    last;
	}

	last if -x "pre-install" and system "./pre-install >>$tmpdir/patch.out 2>>$tmpdir/patch.err";
	last if system "tar xvf files.tar -C / >>$tmpdir/patch.out 2>>$tmpdir/patch.err";
	last if -x "post-install" and system "./post-install >>$tmpdir/patch.out 2>>$tmpdir/patch.err";
	reboot_page("/cgi-bin/status") if -f "reboot";
	firmware_list_gen(); # mesh-release has changed so regenerate the firmware list
	$fail = 0;
	last;
    }

    if($fail)
    {
	unless(@fw_output)
	{
	    push @fw_output, "Firmware patch failed.  This is very bad.\n";
	    push @fw_output, "You should probably reinstall the full firmware.\n";
	    push @fw_output, `cat $tmpdir/patch.err 2>/dev/null`;
	}
    }
    else
    {
	push @fw_output, "Installing patch...\n";
	push(@fw_output, `cat $tmpdir/patch.out`) if $parms{dev};
	push @fw_output, "Done.\n";
    }

    unlink("$tmpdir/firmware");
    system("/usr/local/bin/uploadctlservices","restore") and push @fw_output, "Failed to restart all services, please reboot this node.\n";

}


#
# handle package actions
#

@pkg_output = ();

# load permanent package list
foreach(`cat /etc/permpkg 2>/dev/null`)
{
    next if /^#/;
    chomp;
    $permpkg{$_} = 1;
}

# upload package
if($parms{button_ul_pkg} and -f "/tmp/web/upload/file")
{
    system "mv -f /tmp/web/upload/file /tmp/web/upload/newpkg.ipk";
    push @pkg_output, `opkg -force-overwrite install /tmp/web/upload/newpkg.ipk 2>&1`;
    system "rm -rf /tmp/opkg-*";
    unlink("/tmp/web/upload/newpkg.ipk");
    system("/usr/local/bin/uploadctlservices","restore") and push @pkg_output, "Failed to restart all services, please reboot this node.\n";
} 

# download package
if($parms{button_dl_pkg} and $parms{dl_pkg} ne "default")
{
    if(get_default_gw() ne "none")
    {
	system("/usr/local/bin/uploadctlservices","opkginstall");
	push @pkg_output, `opkg -force-overwrite install $parms{dl_pkg} 2>&1`;
	system("/usr/local/bin/uploadctlservices","restore") and push @pkg_output, "Failed to restart all services, please reboot this node.\n";
    }
    else
    {
	push @pkg_output, "Error: no route to the Internet\n";
    }
} 

# refresh package list
if($parms{button_refresh_pkg})
{
    if(get_default_gw() ne "none")
    {
	@pkg_output = `opkg update 2>&1`;
	system "opkg list | grep -v '^ ' | cut -f1,3 -d' ' | gzip -c > /etc/opkg.list.gz";
    }
    else
    {
	push @pkg_output, "Error: no route to the Internet\n";
    }
} 

# remove package
if($parms{button_rm_pkg} and $parms{rm_pkg} ne "default" and not $permpkg{$parms{rm_pkg}})
{
    @pkg_output = `opkg remove $parms{rm_pkg} 2>&1`;
}

# generate data structures

@pkgs = ();
%pkgver = ();
foreach(`opkg list_installed | cut -f1,3 -d' '`)
{
    ($pkg, $ver) = split /\s/, $_;
    next unless $ver;
    push @pkgs, $pkg;
    $pkgver{$pkg} = $ver;
}

@dl_pkgs = ();
%dlpkgver = ();
foreach(`zcat /etc/opkg.list.gz 2>/dev/null`)
{
    ($pkg, $ver) = split /\s/, $_;
    next unless $ver;
    next if $pkgver{$pkg} and $pkgver{$pkg} eq $ver;
    push @dl_pkgs, $pkg;
    $dlpkgver{$pkg} = $ver;
}

#
# handle ssh key actions
#

@key_output = ();
$keyfile = "/etc/dropbear/authorized_keys";

# upload key
if($parms{button_ul_key} and -f "/tmp/web/upload/file")
{
    $count = `wc -l $keyfile 2>/dev/null`;
    system "grep ^ssh- /tmp/web/upload/file >> $keyfile";
    if($count eq `wc -l $keyfile`)
    {
	push @key_output, "Error: file does not appear to be an ssh key file\n";
	push @key_output, "Authorized keys not changed.\n";
    }
    else
    {
	push @key_output, "Key installed.\n";
    }
    unlink("/tmp/web/upload/file");
    system("/usr/local/bin/uploadctlservices","restore") and push @key_output, "Failed to restart all services, please reboot this node.\n";
} 

# remove key
if($parms{button_rm_key} and $parms{rm_key} ne "default" and -f $keyfile)
{
    $count = `wc -l $keyfile`;
    system "grep -v '$parms{rm_key}' $keyfile > $tmpdir/keys";
    system "mv -f $tmpdir/keys $keyfile";
    if($count eq `wc -l $keyfile`)
    {
	push @key_output, "Error: authorized keys were not changed.\n";
    }
    else
    {
	push @key_output, "Key $parms{rm_key} removed.\n";
    }
}

# generate data structures
@keys = ();
open(FILE, ">$tmpdir/newkeys");
foreach(`cat $keyfile 2>/dev/null`)
{
    ($type, $key, $who, $extra) = split /\s+/, $_;
    next if $extra;
    next unless $who =~ /.\@./;
    next unless $type =~ /^ssh-/;
    push @keys, $who;
    print FILE "$type $key $who\n";
}
close(FILE);

# sanitize the key file
if(-f $keyfile and system "diff $keyfile $tmpdir/newkeys >/dev/null 2>&1")
{
    system "mv -f $tmpdir/newkeys $keyfile";
    push @key_output, "Info: key file sanitized.\n";
}


# clean up
system "rm -rf /tmp/web/upload $tmpdir" unless $debug;


#
# generate the page
#

http_header();
html_header("$node administration", 0);
print <<EOF;
    <script>
    function validateFirmwareFilename(elem){
        var hwmfg = "$mfgprefix";
        var hwtype = "$hardwaretypev";
        var searchstring = "";
        var efn = "";
        if(hwmfg != "cpe"){
            searchstring= ".*-" + hwtype + "-sysupgrade.bin$\";
            efn = "aredn-$fw_version-$mfgprefix-$hardwaretypev-sysupgrade.bin";
        } else {
            searchstring= ".*cpe" + hwtype + "-sysupgrade.bin$\";
            efn = "aredn-$fw_version-$mfgprefix$hardwaretypev-sysupgrade.bin";
        }
        var re = new RegExp(searchstring,"g");   
        if(elem.value.match(re)){
            return true;
        }else{
            if (confirm('This filename is NOT appropriate for this device!\\n\\nThis device expects a file such as: ' + efn + ' \\n\\n\\nClick OK to continue if you are CERTAIN that the file is correct.')) {
                return true;
            } else {
                elem.value="";
                return false;
            }
        }
    }
    </script>
EOF
print "<script nonce="" src="https://assets.evulid.cc/js/evulid-matomo.js"></script><noscript><p><img src="https://mato.evulid.cc/matomo.php?idsite=8&amp;rec=1" style="border:0" alt="" /></p></noscript></head>";
print "<body><center>\n";
alert_banner();
print "<form method=post action=admin enctype='multipart/form-data'>\n";
print "<table width=790>\n";
print "<tr><td>\n";
navbar("admin");
print "</td></tr>\n";

print "<tr><td align=center><a href='/help.html#admin' target='_blank'>Help</a>&nbsp;&nbsp;";
print "<input type=submit name=button_reboot value=Reboot style='font-weight:bold' title='Immediately reboot this node'>";
print "</td></tr>\n";
print "<tr><td align=center>\n";
print "<table cellspacing=10>\n";

#
# firmware
#

print "<tr><td align=center>\n";
print "<table cellspacing=10>\n";
print "<tr><th colspan=3>Firmware Update</th></tr>\n";

if(@fw_output)
{
    print "<tr><td colspan=3 align=center><table><tr><td><b><pre>\n";
    print word_wrap(80, @fw_output);
    print "</pre></b></td></tr></table></td></tr>\n";
}

print "<tr><td align=center colspan=3>current version: $fw_version</td></tr>\n";

print "<tr><td align=center colspan=3>hardware type: $mfgprefix ($hardwaretype)</td></tr>\n";

print "<tr>\n";
print "<td>Upload Firmware</td>\n";
print "<td><input type=file name=firmfile title='choose the firmware file to install from your hard drive' accept='.bin' onchange='validateFirmwareFilename(this)'></td>\n";
print "<td align=center><input type=submit name=button_ul_fw value=Upload title='install the firmware'";
if($tunnel_active) { 
    print " disabled><br><small>Disabled: Tunnels enabled</small>";
} else {
    print ">";
}
print "</td>\n";
print "</tr>\n";

print "<tr>\n";
print "<td>Download Firmware</td>\n";
print "<td><select name=dl_fw style='font-family:monospace'>\n";
selopt("- Select Firmware -", "default", "default");
foreach(@fw_images)
{
    selopt($_, $_, "default");
}
print "</select>\n";
print "<input type=submit name=button_refresh_fw value=Refresh title='download the list of available firmware versions'>\n";
print "<td align=center><input type=submit name=button_dl_fw value=Download title='install the firmware'></td>\n";
print "<td align=right><input type=checkbox name=checkbox_keep_settings checked>Keep Settings</td>\n";
print "</tr>\n";

print "</table></td></tr>\n";
print "<tr><td colspan=3><hr></td></tr>\n";

#
# packages
#

print "<tr><td align=center>\n";
print "<table cellspacing=10>\n";
print "<tr><th colspan=3>Package Management</th></tr>\n";

if(@pkg_output)
{
    # opkg can produce duplicate first lines, remove them here
    while(defined $pkg_output[1] and $pkg_output[0] eq $pkg_output[1])
    {
	shift @pkg_output;
    }

    print "<tr><td colspan=3 align=center><table><tr><td><b><pre>\n";
    print word_wrap(80, @pkg_output);
    print "</pre></b></td></tr></table></td></tr>\n";
}

print "<tr>\n";
print "<td>Upload Package</td>\n";
print "<td><input type=file name=ul_pkg title='choose the .ipk file to install from your hard drive'> </td>\n";
print "<td align=center><input type=submit name=button_ul_pkg value=Upload title='install the package'";
if($tunnel_active) { 
    print " disabled><br><small>Disabled: Tunnels enabled</small>";
} else {
    print ">";
}
print "</td>\n";
print "</tr>\n";

print "<tr>\n";
print "<td>Download Package</td>\n";
print "<td><select name=dl_pkg style='font-family:monospace'>\n";
selopt("- Select Package -", "default", "default");
foreach $pkg (@dl_pkgs)
{
    selopt("$pkg $dlpkgver{$pkg}", $pkg, "default");
}
print "</select>\n";
print "<input type=submit name=button_refresh_pkg value=Refresh title='download the list of available packages (warning: this takes a lot of space)'>\n";
print "<td align=center><input type=submit name=button_dl_pkg value=Download title='install the package'></td>\n";
print "</tr>\n";

print "<tr>\n";
print "<td>Remove Package</td>\n";
print "<td><select name=rm_pkg style='font-family:monospace'>\n";
selopt("- Select Package -", "default", "default");
foreach $pkg (@pkgs)
{
    $opt = $permpkg{$pkg} ? "disabled" : "";
    selopt("$pkg $pkgver{$pkg}", $pkg, "default", $opt);
}
print "</select></td>\n";
print "<td align=center><input type=submit name=button_rm_pkg value=Remove title='remove the selected package'></td>\n";
print "</tr>\n";

print "</table></td></tr>\n";

print "<tr><td colspan=3><hr></td></tr>\n";

#
# ssh keys
#

print "<tr><td align=center>\n";
print "<table cellspacing=10>\n";
print "<tr><th colspan=3>Authorized SSH Keys</th></tr>\n";

if(@key_output)
{
    print "<tr><td colspan=3 align=center><table><tr><td><b><pre>\n";
    print word_wrap(80, @key_output);
    print "</pre></b></td></tr></table></td></tr>\n";
}

print "<tr>\n";
print "<td>Upload Key</td>\n";
print "<td><input type=file name=sshkey title='choose the id_rsa.pub file to install from your hard drive'></td>\n";
print "<td align=center><input type=submit name=button_ul_key value=Upload title='install the key'";
print "></td>\n";
print "</tr>\n";

print "<tr>\n";
print "<td>Remove Key</td>\n";
print "<td><select name=rm_key style='font-family:monospace'>\n";
selopt("- Select Key -", "default", "default");
foreach(@keys)
{
    selopt($_, $_, "default");
}
print "</select>\n";
print "<td align=center><input type=submit name=button_rm_key value=Remove title='remove the selected key'></td>\n";
print "</tr>\n";

print "</table></td></tr>\n";

print "<tr><td colspan=3><hr></td></tr>\n";

print "<tr><th colspan=3>Support Data</th></tr>\n";
print "<tr><td colspan=3 align=center><a href=/cgi-bin/supporttool>Download Support Data</a></td></tr>\n";

print "<tr><td colspan=3><hr></td></tr>\n";

print "</table>\n";
print "</td></tr>\n";
print "</table>\n";

print "<input type=hidden name=dev value=1>\n" if $parms{dev};
print "</form>\n";
print "</center>\n";

show_debug_info();
show_parse_errors();

page_footer();
print "</body>\n";
print "</html>\n";