#!/usr/bin/perl
$debug = 0;
BEGIN {push @INC, '/www/cgi-bin'};
use perlfunc;
use ucifunc;
use tunfunc;

$VPNVER="1.0";
$config = nvram_get("config");
$node = nvram_get("node");
$node = "NOCALL" if $node eq "";
$unode = uc $node;   # UPPER CASE NODENAME
#$vpnconnfile = "/etc/vtun.connections";
#$tmpdir = "/tmp/web/vpn";
#$tmpvtundconf = "${tmpdir}/vtund.conf.tmp";
#$tmpvtundservice = "${tmpdir}/vtund.service.tmp";  # contains connection rows
#$tmpvtund = "${tmpdir}/vtund.tmp";
#$tmpconnfile = "${tmpdir}/vpnconnections";

read_postdata();
@active_tun=&get_active_tun();

#################
# page checks
#################
if($parms{button_reboot})
{
    system "/sbin/reboot";
} 

if($parms{button_install})
{
    install_vtun();
} 

reboot_required() if($config eq "" or -e "/tmp/reboot-required");
vpn_setup_required() unless(-e "/usr/sbin/vtund" );
 
#################
# If RESET or FIRST TIME, load servers into parms
#################

if($parms{button_reset} or not $parms{reload})
{
    # load connections from UCI
    &get_connection_info();
    
    # initialize the "add" entries to clear them
    foreach $var (qw(conn_add_enabled conn_add_host conn_add_passwd conn_add_netip))
    {
        $parms{$var} = "";
        $parms{$var} = "0" if($var eq 'conn_add_enabled');
    }
}

#################
# load connections from FORM and validate
#################
for($i =1 , @list = (); $i <= $parms{conn_num}; ++$i) { push @list, $i }
push @list, "_add";
$conn_num = 0;

foreach $val (@list)
{
    foreach $var (qw(enabled host passwd netip))
    {
        $varname = "conn${val}_$var";
        $parms{$varname} = "0" if($val eq "enabled" and $parms{$varname} eq "");
        $parms{$varname} = "" unless $parms{$varname};
        $parms{$varname} =~ s/^\s+//;
        $parms{$varname} =~ s/\s+$//;
        if($val ne "_add")
        {
            if($parms{$varname} eq "" and ($var eq "enabled"))
            {
                $parms{$varname} = "0"; 
            }
        }
        eval sprintf("\$%s = \$parms{%s}", $var, $varname);
    }


    # Validate ADDed values    
    if($val eq "_add")  { next unless ($enabled or $host or $passwd or $netip) and ($parms{conn_add} or $parms{button_save}) }
    else                { next if $parms{"conn${val}_del"} }

    # Validate password is vtun compliant
    # TODO

    if($val eq "_add" and $parm{button_save})
    {
        push @conn_err, "$val this connection must be added or cleared out before saving changes";
        next;
    }

    push @conn_err, "A connection server is required" if($host eq "");
    push @conn_err, "A connection password is required" if($passwd eq "");

    next if $val eq "_add" and @cli_err and $cli_err[-1] =~ /^$val /;

    # Commit the data for this connection
    ++$conn_num;

    $parms{"conn${conn_num}_enabled"} = $enabled;
    $parms{"conn${conn_num}_host"} = $host;
    $parms{"conn${conn_num}_passwd"} = $passwd;
    $parms{"conn${conn_num}_netip"} = $netip;

    # Clear out the ADD values
    if($val eq "_add")
    {
        foreach $var (qw(enabled host passwd netip))
            {
                $parms{"conn_add_${var}"} = "";
            }   
    }
}

#################
# SAVE the clients the UCI vtun file
#################
$parms{conn_num} = $conn_num;

if($parms{button_save} and not (@conn_err or @serv_err))
{
    # ADD/SET all server type entries
    for($i=1; $i<=$conn_num; $i++)
    {
        foreach $var (qw(enabled host passwd netip)) 
        {
            eval sprintf("\$val = \$parms{conn%s_%s}",$i,$var);
            $idx=$i*(-1);
            push(@errors,"Problem adding server entry into config file") if &uci_set_indexed_option("vtun","server",$idx,$var,$val);
        }
        # TODO: calculate clientip and serverip
        #
        # TODO: uci_set_indexed_option("vtun","server",-1,"clientip",$clientip);
        # TODO: uci_set_indexed_option("vtun","server",-1,"clientip",$serverip);
        # TODO: uci_set_indexed_option("vtun","server",-1,"node",$nodename)
    }

    push(@errors,"Problem committing server entry into config file") if system "uci commit vtun > /dev/null 2>&1";

    # COPY /etc/config/vtun to /etc/config.mesh/vtun (to workaround node-setup script issues)
    system "cp /etc/config/vtun /etc/config.mesh/vtun";

    # STOP vtun clients
    system "/etc/init.d/vtund stop > /dev/null 2>&1";
    
    # START VTUND  /etc/init.d/vtund start
    unless($debug == 3)
    {
        push(@errors,"Problem starting vtund") if system "/etc/init.d/vtund start > /dev/null 2>&1";
    }
}


######################################################################################
# generate the page
######################################################################################
http_header() unless $debug == 2;
html_header("$node setup", 1);

print "<body><center>\n";
print "<form method=post action=/cgi-bin/vpnc enctype='multipart/form-data'>\n" unless $debug == 2;
print "<form method=post action=test>\n" if $debug == 2;
print "<table width=790>\n";

#################
# Navigation bar
#################
print "<tr><td>\n";
navbar("vpnc");
print "</td></tr>\n";

#################
# control buttons
#################
print "<tr><td align=center>";
print "<a href='/help.html#vpn' target='_blank'>Help</a>";
print "&nbsp;&nbsp;&nbsp;\n";
print "<input type=submit name=button_save value='Save Changes' title='Save and use these settings now (takes about 20 seconds)'>&nbsp;\n";
print "<input type=submit name=button_reset value='Reset Values' title='Revert to the last saved settings'>&nbsp;\n";
print "<input type=submit name=button_refresh value='Refresh' title='Refresh this page'>&nbsp;\n";
print "<tr><td>&nbsp;</td></tr>\n";
push @hidden, "<input type=hidden name=reload value=1></td></tr>";

#################
# messages
#################
if(@cli_err)
{
    print "<tr><td align=center><b>ERROR:<br>";
    foreach(@conn_err) { print "$_<br>" }
    print "</b></td></tr>\n";
}

if($parms{button_save})
{
    if(@cli_err)
    {
	print "<tr><td align=center><b>Configuration NOT saved!</b></td></tr>\n";
    }
    elsif(@errors)
    {
	print "<tr><td align=center><b>Configuration saved, however:<br>";
	foreach(@errors) { print "$_<br>" }
	print "</b></td></tr>\n";
    }
    else
    {
	print "<tr><td align=center><b>Configuration saved and is now active.</b></td></tr>\n";
    }

    print "<tr><td>&nbsp;</td></tr>\n";
}

#################
# everything else
#################
if($config eq "mesh")
{
    print "<tr><td align=center valign=top>\n";
    &print_vpn_connections();
    print "</td></tr>\n";
    
    print "<tr><td><hr></td></tr>\n";
}
print "</table>\n";
print "<p style='font-size:8px'>VPN v${VPNVER}</p>";
push @hidden, "<input type=hidden name=conn_num value=$parms{conn_num}>";

#################
# add hidden form fields
#################
foreach(@hidden) { print "$_\n" }

#################
# close the form
#################
print "</form></center>\n";
show_debug_info();

#################
# close the html
#################
print "</body></html>\n";
exit;


##################
# page subsections
##################


######################################################
# List the connections to be made from this client
######################################################
sub print_vpn_connections()
{
    print "<table id=connection_section cellpadding=0 cellspacing=0>";
    print "<tr><th colspan=6>Connect this node to the following servers:</th></tr>";
    print "<tr><th colspan=6><hr></th></tr>\n";
    print "<tr><th>Enabled?</th><th>Server</th><th>Pwd</th><th>Network</th><th>Active&nbsp;</th><th>Action</th></tr>\n";

    for($i = 1, @list = (); $i <= $parms{conn_num}; ++$i) { push @list, $i };

    push @list, "_add" unless($parms{conn_num} > 9);

    $cnum=0;
    foreach $val (@list)
    {
        foreach $var (qw(enabled host passwd netip))
        {
            eval sprintf("\$%s = \$parms{conn%s_%s}", $var, $val, $var);
        }

        print "<tr><td height=10></td></tr>\n" if $val eq "_add" and scalar(@list) > 1;
        print "<tr>";
        print "<td>";

        # Required to be first, so, if the checkbox is cleared, a value will still POST
        print "<input type='hidden' name='conn${val}_enabled' value='0'>" unless($val eq "_add");
        print "<input type='checkbox' name='conn${val}_enabled' value='1'";
        print " onChange='form.submit()'" unless $val eq "_add";
        print " checked='checked'" if $enabled;
        #print " disabled" unless $val eq "_add";
        print " title='enable this connection'></td>";
 
        print "<td><input type=text size=25 name=conn${val}_host value='$host'";
        print " onChange='form.submit()'" unless $val eq "_add";
        # print " disabled" unless $val eq "_add";
        print " title='connection name'></td>";

        print "<td>&nbsp;&nbsp;<input type=text size=20 name=conn${val}_passwd value='$passwd' ";
        print " onChange='form.submit()'" unless $val eq "_add";
        print " title='connection password'";
        #print " disabled" unless $val eq "_add";
        print "></td>";

        print "<td>&nbsp;&nbsp;<input type=text size=14 name=conn${val}_netip value='$netip'";
        print " onChange='form.submit()'" unless $val eq "_add";
        # print " disabled" unless $val eq "_add";
        print " title='connection network'></td>";

        #if($val eq "_add") { print @netw[3]+(($net) * 4); }
        #else { print @netw[3]+($net * 4); }
        
        #print @netw[3]+($net * 4) unless $val eq "_add";
        print "</td>";
        print "<td>&nbsp;";
        #print "<img src='/dot.png'/>" if(@active_tun[$cnum]);  
        print "<img src='/dot.png'/>" if((&is_tunnel_active($netip, @active_tun)) && ($val ne "_add"));
        print "</td>";
        print "<td>&nbsp;";    

        print "<input type=submit name=";
        if($val eq "_add")  { print "conn_add value=Add title='Add this connection'" }
        else                { print "conn${val}_del value=Del title='Delete this connection'" }
        print "></td></tr>\n";

        # display any errors
        while(@conn_err and $conn_err[0] =~ /^$val /)
        {
            $err = shift @conn_err;
            $err =~ s/^\S+ //;
            print "<tr><th colspan=4>$err</th></tr>\n";
        }

        #push @hidden, "<input type='hidden' name='client${val}_enable' value='0'>" unless($val eq "_add");
        
        print "<tr><td colspan=6 height=4></td></tr>\n";
        $cnum++;
    }
    print "</table>\n";
}


#################################
# generate the UCI file
#################################
sub build_uci()
{
    
    # loop over each connection
    #$cnum=0;
    foreach(`cat $vpnconnfile 2>/dev/null`)
    {
        next if /^\s*#/;   ## ignore lines that start with '#'
        next if /^\s*$/;   ## ignore lines that start with '$'
        chomp;

        @parts = split /\|/, $_;
        
        next unless scalar(@parts) == 4;

        $enable = @parts[0];
        $server = @parts[1];
        $pass = @parts[2];
        $net = @parts[3];

        @netw=split /\./, $net;

        unless($enable)
        {
            # $cnum++;    ## to make sure the tun and ip addresses remain constant
            next;
        }
        $clientname=sprintf("%s-%d-%d-%d-%d",$unode,@netw[0],@netw[1],@netw[2],@netw[3]);
        $net3=@netw[2];
        #$net4=@netw[3]+($cnum*4);
        $net4=@netw[3];
        $netnet=sprintf("%d.%d.%d.%d",@netw[0],@netw[1],$net3,$net4);
        $netcli=sprintf("%d.%d.%d.%d",@netw[0],@netw[1],$net3,$net4+1);
        $netserv=sprintf("%d.%d.%d.%d",@netw[0],@netw[1],$net3,$net4+2);

        # uci set vtun.@server[-1].host
        # uci set vtun.@server[-1].node
        # uci set vtun.@server[-1].passwd
        # uci set vtun.@server[-1].netip
        # uci commit vtun

        $cnum++;
    }    
}

#################################
# load info from UCI
#################################
sub get_connection_info()
{    
    my $x;
    
    # how many connections
    my $connection_count=&uci_get_type_count("vtun","server");
    
    for (my $i=1; $i<=$connection_count; $i++) {

        foreach $var (qw(enabled host passwd netip))
        {
            $x=&uci_get_indexed_item("vtun","server",$i-1,$var);
            $parms{"conn${i}_${var}"}=$x;
            #eval sprintf("\$%s = \$parms{conn%s_%s}", $var, $val, $var);
        }
    }
    $parms{conn_num} = $connection_count;
}

sub DEBUGEXIT()
{
    my ($text) = @_;
    http_header();
    html_header("$node setup", 1);
    print "DEBUG[";
    print $text;
    print "]</body>";
    exit;
}