aredn/patches/730-ipq40xx-dsa.patch

19079 lines
520 KiB
Diff

--- a/target/linux/ipq40xx/Makefile
+++ b/target/linux/ipq40xx/Makefile
@@ -15,7 +15,7 @@ KERNELNAME:=zImage Image dtbs
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += \
kmod-usb-dwc3-qcom \
- kmod-leds-gpio kmod-gpio-button-hotplug swconfig \
+ kmod-leds-gpio kmod-gpio-button-hotplug \
kmod-ath10k-ct wpad-mini \
kmod-usb3 kmod-usb-dwc3 ath10k-firmware-qca4019-ct \
uboot-envtools
--- a/target/linux/ipq40xx/config-5.10
+++ b/target/linux/ipq40xx/config-5.10
@@ -1,7 +1,6 @@
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_APQ_GCC_8084 is not set
# CONFIG_APQ_MMCC_8084 is not set
-CONFIG_AR40XX_PHY=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_IPQ40XX=y
--- a/target/linux/ipq40xx/config-5.10
+++ b/target/linux/ipq40xx/config-5.10
@@ -148,7 +147,6 @@ CONFIG_DYNAMIC_DEBUG=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EEPROM_AT24=y
-CONFIG_ESSEDMA=y
CONFIG_EXTCON=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
--- a/target/linux/ipq40xx/config-5.10
+++ b/target/linux/ipq40xx/config-5.10
@@ -457,8 +455,6 @@ CONFIG_SPMI=y
CONFIG_SPMI_MSM_PMIC_ARB=y
# CONFIG_SPMI_PMIC_CLKDIV is not set
CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
CONFIG_SWPHY=y
CONFIG_SWP_EMULATE=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
--- a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-## Makefile for the Qualcomm Atheros ethernet edma driver
-#
-
-
-obj-$(CONFIG_ESSEDMA) += essedma.o
-
-essedma-objs := edma_axi.o edma.o edma_ethtool.o
-
--- a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma.c
+++ /dev/null
@@ -1,2177 +0,0 @@
-/*
- * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for
- * any purpose with or without fee is hereby granted, provided that the
- * above copyright notice and this permission notice appear in all copies.
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
- * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <linux/platform_device.h>
-#include <linux/if_vlan.h>
-#include "ess_edma.h"
-#include "edma.h"
-
-extern struct net_device *edma_netdev[EDMA_MAX_PORTID_SUPPORTED];
-bool edma_stp_rstp;
-u16 edma_ath_eth_type;
-
-/* edma_skb_priority_offset()
- * get edma skb priority
- */
-static unsigned int edma_skb_priority_offset(struct sk_buff *skb)
-{
- return (skb->priority >> 2) & 1;
-}
-
-/* edma_alloc_tx_ring()
- * Allocate Tx descriptors ring
- */
-static int edma_alloc_tx_ring(struct edma_common_info *edma_cinfo,
- struct edma_tx_desc_ring *etdr)
-{
- struct platform_device *pdev = edma_cinfo->pdev;
-
- /* Initialize ring */
- etdr->size = sizeof(struct edma_sw_desc) * etdr->count;
- etdr->sw_next_to_fill = 0;
- etdr->sw_next_to_clean = 0;
-
- /* Allocate SW descriptors */
- etdr->sw_desc = vzalloc(etdr->size);
- if (!etdr->sw_desc) {
- dev_err(&pdev->dev, "buffer alloc of tx ring failed=%p", etdr);
- return -ENOMEM;
- }
-
- /* Allocate HW descriptors */
- etdr->hw_desc = dma_alloc_coherent(&pdev->dev, etdr->size, &etdr->dma,
- GFP_KERNEL);
- if (!etdr->hw_desc) {
- dev_err(&pdev->dev, "descriptor allocation for tx ring failed");
- vfree(etdr->sw_desc);
- return -ENOMEM;
- }
-
- return 0;
-}
-
-/* edma_free_tx_ring()
- * Free tx rings allocated by edma_alloc_tx_rings
- */
-static void edma_free_tx_ring(struct edma_common_info *edma_cinfo,
- struct edma_tx_desc_ring *etdr)
-{
- struct platform_device *pdev = edma_cinfo->pdev;
-
- if (likely(etdr->dma))
- dma_free_coherent(&pdev->dev, etdr->size, etdr->hw_desc,
- etdr->dma);
-
- vfree(etdr->sw_desc);
- etdr->sw_desc = NULL;
-}
-
-/* edma_alloc_rx_ring()
- * allocate rx descriptor ring
- */
-static int edma_alloc_rx_ring(struct edma_common_info *edma_cinfo,
- struct edma_rfd_desc_ring *erxd)
-{
- struct platform_device *pdev = edma_cinfo->pdev;
-
- erxd->size = sizeof(struct edma_sw_desc) * erxd->count;
- erxd->sw_next_to_fill = 0;
- erxd->sw_next_to_clean = 0;
-
- /* Allocate SW descriptors */
- erxd->sw_desc = vzalloc(erxd->size);
- if (!erxd->sw_desc)
- return -ENOMEM;
-
- /* Alloc HW descriptors */
- erxd->hw_desc = dma_alloc_coherent(&pdev->dev, erxd->size, &erxd->dma,
- GFP_KERNEL);
- if (!erxd->hw_desc) {
- vfree(erxd->sw_desc);
- return -ENOMEM;
- }
-
- /* Initialize pending_fill */
- erxd->pending_fill = 0;
-
- return 0;
-}
-
-/* edma_free_rx_ring()
- * Free rx ring allocated by alloc_rx_ring
- */
-static void edma_free_rx_ring(struct edma_common_info *edma_cinfo,
- struct edma_rfd_desc_ring *rxdr)
-{
- struct platform_device *pdev = edma_cinfo->pdev;
-
- if (likely(rxdr->dma))
- dma_free_coherent(&pdev->dev, rxdr->size, rxdr->hw_desc,
- rxdr->dma);
-
- vfree(rxdr->sw_desc);
- rxdr->sw_desc = NULL;
-}
-
-/* edma_configure_tx()
- * Configure transmission control data
- */
-static void edma_configure_tx(struct edma_common_info *edma_cinfo)
-{
- u32 txq_ctrl_data;
-
- txq_ctrl_data = (EDMA_TPD_BURST << EDMA_TXQ_NUM_TPD_BURST_SHIFT);
- txq_ctrl_data |= EDMA_TXQ_CTRL_TPD_BURST_EN;
- txq_ctrl_data |= (EDMA_TXF_BURST << EDMA_TXQ_TXF_BURST_NUM_SHIFT);
- edma_write_reg(EDMA_REG_TXQ_CTRL, txq_ctrl_data);
-}
-
-
-/* edma_configure_rx()
- * configure reception control data
- */
-static void edma_configure_rx(struct edma_common_info *edma_cinfo)
-{
- struct edma_hw *hw = &edma_cinfo->hw;
- u32 rss_type, rx_desc1, rxq_ctrl_data;
-
- /* Set RSS type */
- rss_type = hw->rss_type;
- edma_write_reg(EDMA_REG_RSS_TYPE, rss_type);
-
- /* Set RFD burst number */
- rx_desc1 = (EDMA_RFD_BURST << EDMA_RXQ_RFD_BURST_NUM_SHIFT);
-
- /* Set RFD prefetch threshold */
- rx_desc1 |= (EDMA_RFD_THR << EDMA_RXQ_RFD_PF_THRESH_SHIFT);
-
- /* Set RFD in host ring low threshold to generte interrupt */
- rx_desc1 |= (EDMA_RFD_LTHR << EDMA_RXQ_RFD_LOW_THRESH_SHIFT);
- edma_write_reg(EDMA_REG_RX_DESC1, rx_desc1);
-
- /* Set Rx FIFO threshold to start to DMA data to host */
- rxq_ctrl_data = EDMA_FIFO_THRESH_128_BYTE;
-
- /* Set RX remove vlan bit */
- rxq_ctrl_data |= EDMA_RXQ_CTRL_RMV_VLAN;
-
- edma_write_reg(EDMA_REG_RXQ_CTRL, rxq_ctrl_data);
-}
-
-/* edma_alloc_rx_buf()
- * does skb allocation for the received packets.
- */
-static int edma_alloc_rx_buf(struct edma_common_info
- *edma_cinfo,
- struct edma_rfd_desc_ring *erdr,
- int cleaned_count, int queue_id)
-{
- struct platform_device *pdev = edma_cinfo->pdev;
- struct edma_rx_free_desc *rx_desc;
- struct edma_sw_desc *sw_desc;
- struct sk_buff *skb;
- unsigned int i;
- u16 prod_idx, length;
- u32 reg_data;
-
- if (cleaned_count > erdr->count)
- cleaned_count = erdr->count - 1;
-
- i = erdr->sw_next_to_fill;
-
- while (cleaned_count) {
- sw_desc = &erdr->sw_desc[i];
- length = edma_cinfo->rx_head_buffer_len;
-
- if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_REUSE) {
- skb = sw_desc->skb;
-
- /* Clear REUSE Flag */
- sw_desc->flags &= ~EDMA_SW_DESC_FLAG_SKB_REUSE;
- } else {
- /* alloc skb */
- skb = netdev_alloc_skb_ip_align(edma_netdev[0], length);
- if (!skb) {
- /* Better luck next round */
- break;
- }
- }
-
- if (edma_cinfo->page_mode) {
- struct page *pg = alloc_page(GFP_ATOMIC);
-
- if (!pg) {
- dev_kfree_skb_any(skb);
- break;
- }
-
- sw_desc->dma = dma_map_page(&pdev->dev, pg, 0,
- edma_cinfo->rx_page_buffer_len,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(&pdev->dev,
- sw_desc->dma)) {
- __free_page(pg);
- dev_kfree_skb_any(skb);
- break;
- }
-
- skb_fill_page_desc(skb, 0, pg, 0,
- edma_cinfo->rx_page_buffer_len);
- sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_FRAG;
- sw_desc->length = edma_cinfo->rx_page_buffer_len;
- } else {
- sw_desc->dma = dma_map_single(&pdev->dev, skb->data,
- length, DMA_FROM_DEVICE);
- if (dma_mapping_error(&pdev->dev,
- sw_desc->dma)) {
- dev_kfree_skb_any(skb);
- break;
- }
-
- sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_HEAD;
- sw_desc->length = length;
- }
-
- /* Update the buffer info */
- sw_desc->skb = skb;
- rx_desc = (&((struct edma_rx_free_desc *)(erdr->hw_desc))[i]);
- rx_desc->buffer_addr = cpu_to_le64(sw_desc->dma);
- if (++i == erdr->count)
- i = 0;
- cleaned_count--;
- }
-
- erdr->sw_next_to_fill = i;
-
- if (i == 0)
- prod_idx = erdr->count - 1;
- else
- prod_idx = i - 1;
-
- /* Update the producer index */
- edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &reg_data);
- reg_data &= ~EDMA_RFD_PROD_IDX_BITS;
- reg_data |= prod_idx;
- edma_write_reg(EDMA_REG_RFD_IDX_Q(queue_id), reg_data);
-
- /* If we couldn't allocate all the buffers
- * we increment the alloc failure counters
- */
- if (cleaned_count)
- edma_cinfo->edma_ethstats.rx_alloc_fail_ctr++;
-
- return cleaned_count;
-}
-
-/* edma_init_desc()
- * update descriptor ring size, buffer and producer/consumer index
- */
-static void edma_init_desc(struct edma_common_info *edma_cinfo)
-{
- struct edma_rfd_desc_ring *rfd_ring;
- struct edma_tx_desc_ring *etdr;
- int i = 0, j = 0;
- u32 data = 0;
- u16 hw_cons_idx = 0;
-
- /* Set the base address of every TPD ring. */
- for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
- etdr = edma_cinfo->tpd_ring[i];
-
- /* Update descriptor ring base address */
- edma_write_reg(EDMA_REG_TPD_BASE_ADDR_Q(i), (u32)etdr->dma);
- edma_read_reg(EDMA_REG_TPD_IDX_Q(i), &data);
-
- /* Calculate hardware consumer index */
- hw_cons_idx = (data >> EDMA_TPD_CONS_IDX_SHIFT) & 0xffff;
- etdr->sw_next_to_fill = hw_cons_idx;
- etdr->sw_next_to_clean = hw_cons_idx;
- data &= ~(EDMA_TPD_PROD_IDX_MASK << EDMA_TPD_PROD_IDX_SHIFT);
- data |= hw_cons_idx;
-
- /* update producer index */
- edma_write_reg(EDMA_REG_TPD_IDX_Q(i), data);
-
- /* update SW consumer index register */
- edma_write_reg(EDMA_REG_TX_SW_CONS_IDX_Q(i), hw_cons_idx);
-
- /* Set TPD ring size */
- edma_write_reg(EDMA_REG_TPD_RING_SIZE,
- edma_cinfo->tx_ring_count &
- EDMA_TPD_RING_SIZE_MASK);
- }
-
- for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
- rfd_ring = edma_cinfo->rfd_ring[j];
- /* Update Receive Free descriptor ring base address */
- edma_write_reg(EDMA_REG_RFD_BASE_ADDR_Q(j),
- (u32)(rfd_ring->dma));
- j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
- }
-
- data = edma_cinfo->rx_head_buffer_len;
- if (edma_cinfo->page_mode)
- data = edma_cinfo->rx_page_buffer_len;
-
- data &= EDMA_RX_BUF_SIZE_MASK;
- data <<= EDMA_RX_BUF_SIZE_SHIFT;
-
- /* Update RFD ring size and RX buffer size */
- data |= (edma_cinfo->rx_ring_count & EDMA_RFD_RING_SIZE_MASK)
- << EDMA_RFD_RING_SIZE_SHIFT;
-
- edma_write_reg(EDMA_REG_RX_DESC0, data);
-
- /* Disable TX FIFO low watermark and high watermark */
- edma_write_reg(EDMA_REG_TXF_WATER_MARK, 0);
-
- /* Load all of base address above */
- edma_read_reg(EDMA_REG_TX_SRAM_PART, &data);
- data |= 1 << EDMA_LOAD_PTR_SHIFT;
- edma_write_reg(EDMA_REG_TX_SRAM_PART, data);
-}
-
-/* edma_receive_checksum
- * Api to check checksum on receive packets
- */
-static void edma_receive_checksum(struct edma_rx_return_desc *rd,
- struct sk_buff *skb)
-{
- skb_checksum_none_assert(skb);
-
- /* check the RRD IP/L4 checksum bit to see if
- * its set, which in turn indicates checksum
- * failure.
- */
- if (rd->rrd6 & EDMA_RRD_CSUM_FAIL_MASK)
- return;
-
- skb->ip_summed = CHECKSUM_UNNECESSARY;
-}
-
-/* edma_clean_rfd()
- * clean up rx resourcers on error
- */
-static void edma_clean_rfd(struct edma_rfd_desc_ring *erdr, u16 index)
-{
- struct edma_rx_free_desc *rx_desc;
- struct edma_sw_desc *sw_desc;
-
- rx_desc = (&((struct edma_rx_free_desc *)(erdr->hw_desc))[index]);
- sw_desc = &erdr->sw_desc[index];
- if (sw_desc->skb) {
- dev_kfree_skb_any(sw_desc->skb);
- sw_desc->skb = NULL;
- }
-
- memset(rx_desc, 0, sizeof(struct edma_rx_free_desc));
-}
-
-/* edma_rx_complete_fraglist()
- * Complete Rx processing for fraglist skbs
- */
-static void edma_rx_complete_stp_rstp(struct sk_buff *skb, int port_id, struct edma_rx_return_desc *rd)
-{
- int i;
- u32 priority;
- u16 port_type;
- u8 mac_addr[EDMA_ETH_HDR_LEN];
-
- port_type = (rd->rrd1 >> EDMA_RRD_PORT_TYPE_SHIFT)
- & EDMA_RRD_PORT_TYPE_MASK;
- /* if port type is 0x4, then only proceed with
- * other stp/rstp calculation
- */
- if (port_type == EDMA_RX_ATH_HDR_RSTP_PORT_TYPE) {
- u8 bpdu_mac[6] = {0x01, 0x80, 0xc2, 0x00, 0x00, 0x00};
-
- /* calculate the frame priority */
- priority = (rd->rrd1 >> EDMA_RRD_PRIORITY_SHIFT)
- & EDMA_RRD_PRIORITY_MASK;
-
- for (i = 0; i < EDMA_ETH_HDR_LEN; i++)
- mac_addr[i] = skb->data[i];
-
- /* Check if destination mac addr is bpdu addr */
- if (!memcmp(mac_addr, bpdu_mac, 6)) {
- /* destination mac address is BPDU
- * destination mac address, then add
- * atheros header to the packet.
- */
- u16 athr_hdr = (EDMA_RX_ATH_HDR_VERSION << EDMA_RX_ATH_HDR_VERSION_SHIFT) |
- (priority << EDMA_RX_ATH_HDR_PRIORITY_SHIFT) |
- (EDMA_RX_ATH_HDR_RSTP_PORT_TYPE << EDMA_RX_ATH_PORT_TYPE_SHIFT) | port_id;
- skb_push(skb, 4);
- memcpy(skb->data, mac_addr, EDMA_ETH_HDR_LEN);
- *(uint16_t *)&skb->data[12] = htons(edma_ath_eth_type);
- *(uint16_t *)&skb->data[14] = htons(athr_hdr);
- }
- }
-}
-
-/*
- * edma_rx_complete_fraglist()
- * Complete Rx processing for fraglist skbs
- */
-static int edma_rx_complete_fraglist(struct sk_buff *skb, u16 num_rfds, u16 length, u32 sw_next_to_clean,
- u16 *cleaned_count, struct edma_rfd_desc_ring *erdr, struct edma_common_info *edma_cinfo)
-{
- struct platform_device *pdev = edma_cinfo->pdev;
- struct edma_hw *hw = &edma_cinfo->hw;
- struct sk_buff *skb_temp;
- struct edma_sw_desc *sw_desc;
- int i;
- u16 size_remaining;
-
- skb->data_len = 0;
- skb->tail += (hw->rx_head_buff_size - 16);
- skb->len = skb->truesize = length;
- size_remaining = length - (hw->rx_head_buff_size - 16);
-
- /* clean-up all related sw_descs */
- for (i = 1; i < num_rfds; i++) {
- struct sk_buff *skb_prev;
- sw_desc = &erdr->sw_desc[sw_next_to_clean];
- skb_temp = sw_desc->skb;
-
- dma_unmap_single(&pdev->dev, sw_desc->dma,
- sw_desc->length, DMA_FROM_DEVICE);
-
- if (size_remaining < hw->rx_head_buff_size)
- skb_put(skb_temp, size_remaining);
- else
- skb_put(skb_temp, hw->rx_head_buff_size);
-
- /*
- * If we are processing the first rfd, we link
- * skb->frag_list to the skb corresponding to the
- * first RFD
- */
- if (i == 1)
- skb_shinfo(skb)->frag_list = skb_temp;
- else
- skb_prev->next = skb_temp;
- skb_prev = skb_temp;
- skb_temp->next = NULL;
-
- skb->data_len += skb_temp->len;
- size_remaining -= skb_temp->len;
-
- /* Increment SW index */
- sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
- (*cleaned_count)++;
- }
-
- return sw_next_to_clean;
-}
-
-/* edma_rx_complete_paged()
- * Complete Rx processing for paged skbs
- */
-static int edma_rx_complete_paged(struct sk_buff *skb, u16 num_rfds, u16 length, u32 sw_next_to_clean,
- u16 *cleaned_count, struct edma_rfd_desc_ring *erdr, struct edma_common_info *edma_cinfo)
-{
- struct platform_device *pdev = edma_cinfo->pdev;
- struct sk_buff *skb_temp;
- struct edma_sw_desc *sw_desc;
- int i;
- u16 size_remaining;
-
- skb_frag_t *frag = &skb_shinfo(skb)->frags[0];
-
- /* Setup skbuff fields */
- skb->len = length;
-
- if (likely(num_rfds <= 1)) {
- skb->data_len = length;
- skb->truesize += edma_cinfo->rx_page_buffer_len;
- skb_fill_page_desc(skb, 0, skb_frag_page(frag),
- 16, length);
- } else {
- skb_frag_size_sub(frag, 16);
- skb->data_len = skb_frag_size(frag);
- skb->truesize += edma_cinfo->rx_page_buffer_len;
- size_remaining = length - skb_frag_size(frag);
-
- skb_fill_page_desc(skb, 0, skb_frag_page(frag),
- 16, skb_frag_size(frag));
-
- /* clean-up all related sw_descs */
- for (i = 1; i < num_rfds; i++) {
- sw_desc = &erdr->sw_desc[sw_next_to_clean];
- skb_temp = sw_desc->skb;
- frag = &skb_shinfo(skb_temp)->frags[0];
- dma_unmap_page(&pdev->dev, sw_desc->dma,
- sw_desc->length, DMA_FROM_DEVICE);
-
- if (size_remaining < edma_cinfo->rx_page_buffer_len)
- skb_frag_size_set(frag, size_remaining);
-
- skb_fill_page_desc(skb, i, skb_frag_page(frag),
- 0, skb_frag_size(frag));
-
- skb_shinfo(skb_temp)->nr_frags = 0;
- dev_kfree_skb_any(skb_temp);
-
- skb->data_len += skb_frag_size(frag);
- skb->truesize += edma_cinfo->rx_page_buffer_len;
- size_remaining -= skb_frag_size(frag);
-
- /* Increment SW index */
- sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
- (*cleaned_count)++;
- }
- }
-
- return sw_next_to_clean;
-}
-
-/*
- * edma_rx_complete()
- * Main api called from the poll function to process rx packets.
- */
-static u16 edma_rx_complete(struct edma_common_info *edma_cinfo,
- int *work_done, int work_to_do, int queue_id,
- struct napi_struct *napi)
-{
- struct platform_device *pdev = edma_cinfo->pdev;
- struct edma_rfd_desc_ring *erdr = edma_cinfo->rfd_ring[queue_id];
- struct net_device *netdev;
- struct edma_adapter *adapter;
- struct edma_sw_desc *sw_desc;
- struct sk_buff *skb;
- struct edma_rx_return_desc *rd;
- u16 hash_type, rrd[8], cleaned_count = 0, length = 0, num_rfds = 1,
- sw_next_to_clean, hw_next_to_clean = 0, vlan = 0, ret_count = 0;
- u32 data = 0;
- u8 *vaddr;
- int port_id, i, drop_count = 0;
- u32 priority;
- u16 count = erdr->count, rfd_avail;
- u8 queue_to_rxid[8] = {0, 0, 1, 1, 2, 2, 3, 3};
-
- cleaned_count = erdr->pending_fill;
- sw_next_to_clean = erdr->sw_next_to_clean;
-
- edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data);
- hw_next_to_clean = (data >> EDMA_RFD_CONS_IDX_SHIFT) &
- EDMA_RFD_CONS_IDX_MASK;
-
- do {
- while (sw_next_to_clean != hw_next_to_clean) {
- if (!work_to_do)
- break;
-
- sw_desc = &erdr->sw_desc[sw_next_to_clean];
- skb = sw_desc->skb;
-
- /* Unmap the allocated buffer */
- if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD))
- dma_unmap_single(&pdev->dev, sw_desc->dma,
- sw_desc->length, DMA_FROM_DEVICE);
- else
- dma_unmap_page(&pdev->dev, sw_desc->dma,
- sw_desc->length, DMA_FROM_DEVICE);
-
- /* Get RRD */
- if (edma_cinfo->page_mode) {
- vaddr = kmap_atomic(skb_frag_page(&skb_shinfo(skb)->frags[0]));
- memcpy((uint8_t *)&rrd[0], vaddr, 16);
- rd = (struct edma_rx_return_desc *)rrd;
- kunmap_atomic(vaddr);
- } else {
- rd = (struct edma_rx_return_desc *)skb->data;
- }
-
- /* Check if RRD is valid */
- if (!(rd->rrd7 & EDMA_RRD_DESC_VALID)) {
- edma_clean_rfd(erdr, sw_next_to_clean);
- sw_next_to_clean = (sw_next_to_clean + 1) &
- (erdr->count - 1);
- cleaned_count++;
- continue;
- }
-
- /* Get the number of RFDs from RRD */
- num_rfds = rd->rrd1 & EDMA_RRD_NUM_RFD_MASK;
-
- /* Get Rx port ID from switch */
- port_id = (rd->rrd1 >> EDMA_PORT_ID_SHIFT) & EDMA_PORT_ID_MASK;
- if ((!port_id) || (port_id > EDMA_MAX_PORTID_SUPPORTED)) {
- dev_err(&pdev->dev, "Invalid RRD source port bit set");
- for (i = 0; i < num_rfds; i++) {
- edma_clean_rfd(erdr, sw_next_to_clean);
- sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
- cleaned_count++;
- }
- continue;
- }
-
- /* check if we have a sink for the data we receive.
- * If the interface isn't setup, we have to drop the
- * incoming data for now.
- */
- netdev = edma_cinfo->portid_netdev_lookup_tbl[port_id];
- if (!netdev) {
- edma_clean_rfd(erdr, sw_next_to_clean);
- sw_next_to_clean = (sw_next_to_clean + 1) &
- (erdr->count - 1);
- cleaned_count++;
- continue;
- }
- adapter = netdev_priv(netdev);
-
- /* This code is added to handle a usecase where high
- * priority stream and a low priority stream are
- * received simultaneously on DUT. The problem occurs
- * if one of the Rx rings is full and the corresponding
- * core is busy with other stuff. This causes ESS CPU
- * port to backpressure all incoming traffic including
- * high priority one. We monitor free descriptor count
- * on each CPU and whenever it reaches threshold (< 80),
- * we drop all low priority traffic and let only high
- * priotiy traffic pass through. We can hence avoid
- * ESS CPU port to send backpressure on high priroity
- * stream.
- */
- priority = (rd->rrd1 >> EDMA_RRD_PRIORITY_SHIFT)
- & EDMA_RRD_PRIORITY_MASK;
- if (likely(!priority && !edma_cinfo->page_mode && (num_rfds <= 1))) {
- rfd_avail = (count + sw_next_to_clean - hw_next_to_clean - 1) & (count - 1);
- if (rfd_avail < EDMA_RFD_AVAIL_THR) {
- sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_REUSE;
- sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
- adapter->stats.rx_dropped++;
- cleaned_count++;
- drop_count++;
- if (drop_count == 3) {
- work_to_do--;
- (*work_done)++;
- drop_count = 0;
- }
- if (cleaned_count >= EDMA_RX_BUFFER_WRITE) {
- /* If buffer clean count reaches 16, we replenish HW buffers. */
- ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
- edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
- sw_next_to_clean);
- cleaned_count = ret_count;
- erdr->pending_fill = ret_count;
- }
- continue;
- }
- }
-
- work_to_do--;
- (*work_done)++;
-
- /* Increment SW index */
- sw_next_to_clean = (sw_next_to_clean + 1) &
- (erdr->count - 1);
-
- cleaned_count++;
-
- /* Get the packet size and allocate buffer */
- length = rd->rrd6 & EDMA_RRD_PKT_SIZE_MASK;
-
- if (edma_cinfo->page_mode) {
- /* paged skb */
- sw_next_to_clean = edma_rx_complete_paged(skb, num_rfds, length, sw_next_to_clean, &cleaned_count, erdr, edma_cinfo);
- if (!pskb_may_pull(skb, ETH_HLEN)) {
- dev_kfree_skb_any(skb);
- continue;
- }
- } else {
- /* single or fraglist skb */
-
- /* Addition of 16 bytes is required, as in the packet
- * first 16 bytes are rrd descriptors, so actual data
- * starts from an offset of 16.
- */
- skb_reserve(skb, 16);
- if (likely((num_rfds <= 1) || !edma_cinfo->fraglist_mode)) {
- skb_put(skb, length);
- } else {
- sw_next_to_clean = edma_rx_complete_fraglist(skb, num_rfds, length, sw_next_to_clean, &cleaned_count, erdr, edma_cinfo);
- }
- }
-
- if (edma_stp_rstp) {
- edma_rx_complete_stp_rstp(skb, port_id, rd);
- }
-
- skb->protocol = eth_type_trans(skb, netdev);
-
- /* Record Rx queue for RFS/RPS and fill flow hash from HW */
- skb_record_rx_queue(skb, queue_to_rxid[queue_id]);
- if (netdev->features & NETIF_F_RXHASH) {
- hash_type = (rd->rrd5 >> EDMA_HASH_TYPE_SHIFT);
- if ((hash_type > EDMA_HASH_TYPE_START) && (hash_type < EDMA_HASH_TYPE_END))
- skb_set_hash(skb, rd->rrd2, PKT_HASH_TYPE_L4);
- }
-
-#ifdef CONFIG_NF_FLOW_COOKIE
- skb->flow_cookie = rd->rrd3 & EDMA_RRD_FLOW_COOKIE_MASK;
-#endif
- edma_receive_checksum(rd, skb);
-
- /* Process VLAN HW acceleration indication provided by HW */
- if (unlikely(adapter->default_vlan_tag != rd->rrd4)) {
- vlan = rd->rrd4;
- if (likely(rd->rrd7 & EDMA_RRD_CVLAN))
- __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan);
- else if (rd->rrd1 & EDMA_RRD_SVLAN)
- __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021AD), vlan);
- }
-
- /* Update rx statistics */
- adapter->stats.rx_packets++;
- adapter->stats.rx_bytes += length;
-
- /* Check if we reached refill threshold */
- if (cleaned_count >= EDMA_RX_BUFFER_WRITE) {
- ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
- edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
- sw_next_to_clean);
- cleaned_count = ret_count;
- erdr->pending_fill = ret_count;
- }
-
- /* At this point skb should go to stack */
- napi_gro_receive(napi, skb);
- }
-
- /* Check if we still have NAPI budget */
- if (!work_to_do)
- break;
-
- /* Read index once again since we still have NAPI budget */
- edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data);
- hw_next_to_clean = (data >> EDMA_RFD_CONS_IDX_SHIFT) &
- EDMA_RFD_CONS_IDX_MASK;
- } while (hw_next_to_clean != sw_next_to_clean);
-
- erdr->sw_next_to_clean = sw_next_to_clean;
-
- /* Refill here in case refill threshold wasn't reached */
- if (likely(cleaned_count)) {
- ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
- erdr->pending_fill = ret_count;
- if (ret_count) {
- if (net_ratelimit())
- dev_dbg(&pdev->dev, "Not all buffers was reallocated");
- }
-
- edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
- erdr->sw_next_to_clean);
- }
-
- return erdr->pending_fill;
-}
-
-/* edma_delete_rfs_filter()
- * Remove RFS filter from switch
- */
-static int edma_delete_rfs_filter(struct edma_adapter *adapter,
- struct edma_rfs_filter_node *filter_node)
-{
- int res = -1;
-
- struct flow_keys *keys = &filter_node->keys;
-
- if (likely(adapter->set_rfs_rule))
- res = (*adapter->set_rfs_rule)(adapter->netdev,
- flow_get_u32_src(keys), flow_get_u32_dst(keys),
- keys->ports.src, keys->ports.dst,
- keys->basic.ip_proto, filter_node->rq_id, 0);
-
- return res;
-}
-
-/* edma_add_rfs_filter()
- * Add RFS filter to switch
- */
-static int edma_add_rfs_filter(struct edma_adapter *adapter,
- struct flow_keys *keys, u16 rq,
- struct edma_rfs_filter_node *filter_node)
-{
- int res = -1;
-
- struct flow_keys *dest_keys = &filter_node->keys;
-
- memcpy(dest_keys, &filter_node->keys, sizeof(*dest_keys));
-/*
- dest_keys->control = keys->control;
- dest_keys->basic = keys->basic;
- dest_keys->addrs = keys->addrs;
- dest_keys->ports = keys->ports;
- dest_keys.ip_proto = keys->ip_proto;
-*/
- /* Call callback registered by ESS driver */
- if (likely(adapter->set_rfs_rule))
- res = (*adapter->set_rfs_rule)(adapter->netdev, flow_get_u32_src(keys),
- flow_get_u32_dst(keys), keys->ports.src, keys->ports.dst,
- keys->basic.ip_proto, rq, 1);
-
- return res;
-}
-
-/* edma_rfs_key_search()
- * Look for existing RFS entry
- */
-static struct edma_rfs_filter_node *edma_rfs_key_search(struct hlist_head *h,
- struct flow_keys *key)
-{
- struct edma_rfs_filter_node *p;
-
- hlist_for_each_entry(p, h, node)
- if (flow_get_u32_src(&p->keys) == flow_get_u32_src(key) &&
- flow_get_u32_dst(&p->keys) == flow_get_u32_dst(key) &&
- p->keys.ports.src == key->ports.src &&
- p->keys.ports.dst == key->ports.dst &&
- p->keys.basic.ip_proto == key->basic.ip_proto)
- return p;
- return NULL;
-}
-
-/* edma_initialise_rfs_flow_table()
- * Initialise EDMA RFS flow table
- */
-static void edma_initialise_rfs_flow_table(struct edma_adapter *adapter)
-{
- int i;
-
- spin_lock_init(&adapter->rfs.rfs_ftab_lock);
-
- /* Initialize EDMA flow hash table */
- for (i = 0; i < EDMA_RFS_FLOW_ENTRIES; i++)
- INIT_HLIST_HEAD(&adapter->rfs.hlist_head[i]);
-
- adapter->rfs.max_num_filter = EDMA_RFS_FLOW_ENTRIES;
- adapter->rfs.filter_available = adapter->rfs.max_num_filter;
- adapter->rfs.hashtoclean = 0;
-
- /* Add timer to get periodic RFS updates from OS */
- timer_setup(&adapter->rfs.expire_rfs, edma_flow_may_expire, 0);
- mod_timer(&adapter->rfs.expire_rfs, jiffies + HZ / 4);
-}
-
-/* edma_free_rfs_flow_table()
- * Free EDMA RFS flow table
- */
-static void edma_free_rfs_flow_table(struct edma_adapter *adapter)
-{
- int i;
-
- /* Remove sync timer */
- del_timer_sync(&adapter->rfs.expire_rfs);
- spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
-
- /* Free EDMA RFS table entries */
- adapter->rfs.filter_available = 0;
-
- /* Clean-up EDMA flow hash table */
- for (i = 0; i < EDMA_RFS_FLOW_ENTRIES; i++) {
- struct hlist_head *hhead;
- struct hlist_node *tmp;
- struct edma_rfs_filter_node *filter_node;
- int res;
-
- hhead = &adapter->rfs.hlist_head[i];
- hlist_for_each_entry_safe(filter_node, tmp, hhead, node) {
- res = edma_delete_rfs_filter(adapter, filter_node);
- if (res < 0)
- dev_warn(&adapter->netdev->dev,
- "EDMA going down but RFS entry %d not allowed to be flushed by Switch",
- filter_node->flow_id);
- hlist_del(&filter_node->node);
- kfree(filter_node);
- }
- }
- spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
-}
-
-/* edma_tx_unmap_and_free()
- * clean TX buffer
- */
-static inline void edma_tx_unmap_and_free(struct platform_device *pdev,
- struct edma_sw_desc *sw_desc)
-{
- struct sk_buff *skb = sw_desc->skb;
-
- if (likely((sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD) ||
- (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAGLIST)))
- /* unmap_single for skb head area */
- dma_unmap_single(&pdev->dev, sw_desc->dma,
- sw_desc->length, DMA_TO_DEVICE);
- else if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAG)
- /* unmap page for paged fragments */
- dma_unmap_page(&pdev->dev, sw_desc->dma,
- sw_desc->length, DMA_TO_DEVICE);
-
- if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_LAST))
- dev_kfree_skb_any(skb);
-
- sw_desc->flags = 0;
-}
-
-/* edma_tx_complete()
- * Used to clean tx queues and update hardware and consumer index
- */
-static void edma_tx_complete(struct edma_common_info *edma_cinfo, int queue_id)
-{
- struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
- struct edma_sw_desc *sw_desc;
- struct platform_device *pdev = edma_cinfo->pdev;
- int i;
-
- u16 sw_next_to_clean = etdr->sw_next_to_clean;
- u16 hw_next_to_clean;
- u32 data = 0;
-
- edma_read_reg(EDMA_REG_TPD_IDX_Q(queue_id), &data);
- hw_next_to_clean = (data >> EDMA_TPD_CONS_IDX_SHIFT) & EDMA_TPD_CONS_IDX_MASK;
-
- /* clean the buffer here */
- while (sw_next_to_clean != hw_next_to_clean) {
- sw_desc = &etdr->sw_desc[sw_next_to_clean];
- edma_tx_unmap_and_free(pdev, sw_desc);
- sw_next_to_clean = (sw_next_to_clean + 1) & (etdr->count - 1);
- }
-
- etdr->sw_next_to_clean = sw_next_to_clean;
-
- /* update the TPD consumer index register */
- edma_write_reg(EDMA_REG_TX_SW_CONS_IDX_Q(queue_id), sw_next_to_clean);
-
- /* Wake the queue if queue is stopped and netdev link is up */
- for (i = 0; i < EDMA_MAX_NETDEV_PER_QUEUE && etdr->nq[i] ; i++) {
- if (netif_tx_queue_stopped(etdr->nq[i])) {
- if ((etdr->netdev[i]) && netif_carrier_ok(etdr->netdev[i]))
- netif_tx_wake_queue(etdr->nq[i]);
- }
- }
-}
-
-/* edma_get_tx_buffer()
- * Get sw_desc corresponding to the TPD
- */
-static struct edma_sw_desc *edma_get_tx_buffer(struct edma_common_info *edma_cinfo,
- struct edma_tx_desc *tpd, int queue_id)
-{
- struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
- return &etdr->sw_desc[tpd - (struct edma_tx_desc *)etdr->hw_desc];
-}
-
-/* edma_get_next_tpd()
- * Return a TPD descriptor for transfer
- */
-static struct edma_tx_desc *edma_get_next_tpd(struct edma_common_info *edma_cinfo,
- int queue_id)
-{
- struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
- u16 sw_next_to_fill = etdr->sw_next_to_fill;
- struct edma_tx_desc *tpd_desc =
- (&((struct edma_tx_desc *)(etdr->hw_desc))[sw_next_to_fill]);
-
- etdr->sw_next_to_fill = (etdr->sw_next_to_fill + 1) & (etdr->count - 1);
-
- return tpd_desc;
-}
-
-/* edma_tpd_available()
- * Check number of free TPDs
- */
-static inline u16 edma_tpd_available(struct edma_common_info *edma_cinfo,
- int queue_id)
-{
- struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
-
- u16 sw_next_to_fill;
- u16 sw_next_to_clean;
- u16 count = 0;
-
- sw_next_to_clean = etdr->sw_next_to_clean;
- sw_next_to_fill = etdr->sw_next_to_fill;
-
- if (likely(sw_next_to_clean <= sw_next_to_fill))
- count = etdr->count;
-
- return count + sw_next_to_clean - sw_next_to_fill - 1;
-}
-
-/* edma_tx_queue_get()
- * Get the starting number of the queue
- */
-static inline int edma_tx_queue_get(struct edma_adapter *adapter,
- struct sk_buff *skb, int txq_id)
-{
- /* skb->priority is used as an index to skb priority table
- * and based on packet priority, correspong queue is assigned.
- */
- return adapter->tx_start_offset[txq_id] + edma_skb_priority_offset(skb);
-}
-
-/* edma_tx_update_hw_idx()
- * update the producer index for the ring transmitted
- */
-static void edma_tx_update_hw_idx(struct edma_common_info *edma_cinfo,
- struct sk_buff *skb, int queue_id)
-{
- struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
- u32 tpd_idx_data;
-
- /* Read and update the producer index */
- edma_read_reg(EDMA_REG_TPD_IDX_Q(queue_id), &tpd_idx_data);
- tpd_idx_data &= ~EDMA_TPD_PROD_IDX_BITS;
- tpd_idx_data |= (etdr->sw_next_to_fill & EDMA_TPD_PROD_IDX_MASK)
- << EDMA_TPD_PROD_IDX_SHIFT;
-
- edma_write_reg(EDMA_REG_TPD_IDX_Q(queue_id), tpd_idx_data);
-}
-
-/* edma_rollback_tx()
- * Function to retrieve tx resources in case of error
- */
-static void edma_rollback_tx(struct edma_adapter *adapter,
- struct edma_tx_desc *start_tpd, int queue_id)
-{
- struct edma_tx_desc_ring *etdr = adapter->edma_cinfo->tpd_ring[queue_id];
- struct edma_sw_desc *sw_desc;
- struct edma_tx_desc *tpd = NULL;
- u16 start_index, index;
-
- start_index = start_tpd - (struct edma_tx_desc *)(etdr->hw_desc);
-
- index = start_index;
- while (index != etdr->sw_next_to_fill) {
- tpd = (&((struct edma_tx_desc *)(etdr->hw_desc))[index]);
- sw_desc = &etdr->sw_desc[index];
- edma_tx_unmap_and_free(adapter->pdev, sw_desc);
- memset(tpd, 0, sizeof(struct edma_tx_desc));
- if (++index == etdr->count)
- index = 0;
- }
- etdr->sw_next_to_fill = start_index;
-}
-
-/* edma_tx_map_and_fill()
- * gets called from edma_xmit_frame
- *
- * This is where the dma of the buffer to be transmitted
- * gets mapped
- */
-static int edma_tx_map_and_fill(struct edma_common_info *edma_cinfo,
- struct edma_adapter *adapter, struct sk_buff *skb, int queue_id,
- unsigned int flags_transmit, u16 from_cpu, u16 dp_bitmap,
- bool packet_is_rstp, int nr_frags)
-{
- struct edma_sw_desc *sw_desc = NULL;
- struct platform_device *pdev = edma_cinfo->pdev;
- struct edma_tx_desc *tpd = NULL, *start_tpd = NULL;
- struct sk_buff *iter_skb;
- int i = 0;
- u32 word1 = 0, word3 = 0, lso_word1 = 0, svlan_tag = 0;
- u16 buf_len, lso_desc_len = 0;
-
- /* It should either be a nr_frags skb or fraglist skb but not both */
- BUG_ON(nr_frags && skb_has_frag_list(skb));
-
- if (skb_is_gso(skb)) {
- /* TODO: What additional checks need to be performed here */
- if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4) {
- lso_word1 |= EDMA_TPD_IPV4_EN;
- ip_hdr(skb)->check = 0;
- tcp_hdr(skb)->check = ~csum_tcpudp_magic(ip_hdr(skb)->saddr,
- ip_hdr(skb)->daddr, 0, IPPROTO_TCP, 0);
- } else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) {
- lso_word1 |= EDMA_TPD_LSO_V2_EN;
- ipv6_hdr(skb)->payload_len = 0;
- tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
- &ipv6_hdr(skb)->daddr, 0, IPPROTO_TCP, 0);
- } else
- return -EINVAL;
-
- lso_word1 |= EDMA_TPD_LSO_EN | ((skb_shinfo(skb)->gso_size & EDMA_TPD_MSS_MASK) << EDMA_TPD_MSS_SHIFT) |
- (skb_transport_offset(skb) << EDMA_TPD_HDR_SHIFT);
- } else if (flags_transmit & EDMA_HW_CHECKSUM) {
- u8 css, cso;
- cso = skb_checksum_start_offset(skb);
- css = cso + skb->csum_offset;
-
- word1 |= (EDMA_TPD_CUSTOM_CSUM_EN);
- word1 |= (cso >> 1) << EDMA_TPD_HDR_SHIFT;
- word1 |= ((css >> 1) << EDMA_TPD_CUSTOM_CSUM_SHIFT);
- }
-
- if (skb->protocol == htons(ETH_P_PPP_SES))
- word1 |= EDMA_TPD_PPPOE_EN;
-
- if (flags_transmit & EDMA_VLAN_TX_TAG_INSERT_FLAG) {
- switch(skb->vlan_proto) {
- case htons(ETH_P_8021Q):
- word3 |= (1 << EDMA_TX_INS_CVLAN);
- word3 |= skb_vlan_tag_get(skb) << EDMA_TX_CVLAN_TAG_SHIFT;
- break;
- case htons(ETH_P_8021AD):
- word1 |= (1 << EDMA_TX_INS_SVLAN);
- svlan_tag = skb_vlan_tag_get(skb) << EDMA_TX_SVLAN_TAG_SHIFT;
- break;
- default:
- dev_err(&pdev->dev, "no ctag or stag present\n");
- goto vlan_tag_error;
- }
- } else if (flags_transmit & EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG) {
- word3 |= (1 << EDMA_TX_INS_CVLAN);
- word3 |= (adapter->default_vlan_tag) << EDMA_TX_CVLAN_TAG_SHIFT;
- }
-
- if (packet_is_rstp) {
- word3 |= dp_bitmap << EDMA_TPD_PORT_BITMAP_SHIFT;
- word3 |= from_cpu << EDMA_TPD_FROM_CPU_SHIFT;
- } else {
- word3 |= adapter->dp_bitmap << EDMA_TPD_PORT_BITMAP_SHIFT;
- }
-
- buf_len = skb_headlen(skb);
-
- if (lso_word1) {
- if (lso_word1 & EDMA_TPD_LSO_V2_EN) {
-
- /* IPv6 LSOv2 descriptor */
- start_tpd = tpd = edma_get_next_tpd(edma_cinfo, queue_id);
- sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
- sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_NONE;
-
- /* LSOv2 descriptor overrides addr field to pass length */
- tpd->addr = cpu_to_le16(skb->len);
- tpd->svlan_tag = svlan_tag;
- tpd->word1 = word1 | lso_word1;
- tpd->word3 = word3;
- }
-
- tpd = edma_get_next_tpd(edma_cinfo, queue_id);
- if (!start_tpd)
- start_tpd = tpd;
- sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
-
- /* The last buffer info contain the skb address,
- * so skb will be freed after unmap
- */
- sw_desc->length = lso_desc_len;
- sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD;
-
- sw_desc->dma = dma_map_single(&adapter->pdev->dev,
- skb->data, buf_len, DMA_TO_DEVICE);
- if (dma_mapping_error(&pdev->dev, sw_desc->dma))
- goto dma_error;
-
- tpd->addr = cpu_to_le32(sw_desc->dma);
- tpd->len = cpu_to_le16(buf_len);
-
- tpd->svlan_tag = svlan_tag;
- tpd->word1 = word1 | lso_word1;
- tpd->word3 = word3;
-
- /* The last buffer info contain the skb address,
- * so it will be freed after unmap
- */
- sw_desc->length = lso_desc_len;
- sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD;
-
- buf_len = 0;
- }
-
- if (likely(buf_len)) {
-
- /* TODO Do not dequeue descriptor if there is a potential error */
- tpd = edma_get_next_tpd(edma_cinfo, queue_id);
-
- if (!start_tpd)
- start_tpd = tpd;
-
- sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
-
- /* The last buffer info contain the skb address,
- * so it will be free after unmap
- */
- sw_desc->length = buf_len;
- sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD;
- sw_desc->dma = dma_map_single(&adapter->pdev->dev,
- skb->data, buf_len, DMA_TO_DEVICE);
- if (dma_mapping_error(&pdev->dev, sw_desc->dma))
- goto dma_error;
-
- tpd->addr = cpu_to_le32(sw_desc->dma);
- tpd->len = cpu_to_le16(buf_len);
-
- tpd->svlan_tag = svlan_tag;
- tpd->word1 = word1 | lso_word1;
- tpd->word3 = word3;
- }
-
- /* Walk through all paged fragments */
- while (nr_frags--) {
- skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
- buf_len = skb_frag_size(frag);
- tpd = edma_get_next_tpd(edma_cinfo, queue_id);
- sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
- sw_desc->length = buf_len;
- sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_FRAG;
-
- sw_desc->dma = skb_frag_dma_map(&pdev->dev, frag, 0, buf_len, DMA_TO_DEVICE);
-
- if (dma_mapping_error(NULL, sw_desc->dma))
- goto dma_error;
-
- tpd->addr = cpu_to_le32(sw_desc->dma);
- tpd->len = cpu_to_le16(buf_len);
-
- tpd->svlan_tag = svlan_tag;
- tpd->word1 = word1 | lso_word1;
- tpd->word3 = word3;
- i++;
- }
-
- /* Walk through all fraglist skbs */
- skb_walk_frags(skb, iter_skb) {
- buf_len = iter_skb->len;
- tpd = edma_get_next_tpd(edma_cinfo, queue_id);
- sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
- sw_desc->length = buf_len;
- sw_desc->dma = dma_map_single(&adapter->pdev->dev,
- iter_skb->data, buf_len, DMA_TO_DEVICE);
-
- if (dma_mapping_error(NULL, sw_desc->dma))
- goto dma_error;
-
- tpd->addr = cpu_to_le32(sw_desc->dma);
- tpd->len = cpu_to_le16(buf_len);
- tpd->svlan_tag = svlan_tag;
- tpd->word1 = word1 | lso_word1;
- tpd->word3 = word3;
- sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_FRAGLIST;
- }
-
- if (tpd)
- tpd->word1 |= 1 << EDMA_TPD_EOP_SHIFT;
-
- sw_desc->skb = skb;
- sw_desc->flags |= EDMA_SW_DESC_FLAG_LAST;
-
- return 0;
-
-dma_error:
- edma_rollback_tx(adapter, start_tpd, queue_id);
- dev_err(&pdev->dev, "TX DMA map failed\n");
-vlan_tag_error:
- return -ENOMEM;
-}
-
-/* edma_check_link()
- * check Link status
- */
-static int edma_check_link(struct edma_adapter *adapter)
-{
- struct phy_device *phydev = adapter->phydev;
-
- if (!(adapter->poll_required))
- return __EDMA_LINKUP;
-
- if (phydev->link)
- return __EDMA_LINKUP;
-
- return __EDMA_LINKDOWN;
-}
-
-/* edma_adjust_link()
- * check for edma link status
- */
-void edma_adjust_link(struct net_device *netdev)
-{
- int status;
- struct edma_adapter *adapter = netdev_priv(netdev);
- struct phy_device *phydev = adapter->phydev;
-
- if (!test_bit(__EDMA_UP, &adapter->state_flags))
- return;
-
- status = edma_check_link(adapter);
-
- if (status == __EDMA_LINKUP && adapter->link_state == __EDMA_LINKDOWN) {
- phy_print_status(phydev);
- adapter->link_state = __EDMA_LINKUP;
- if (adapter->edma_cinfo->is_single_phy) {
- ess_set_port_status_speed(adapter->edma_cinfo, phydev,
- ffs(adapter->dp_bitmap) - 1);
- }
- netif_carrier_on(netdev);
- if (netif_running(netdev))
- netif_tx_wake_all_queues(netdev);
- } else if (status == __EDMA_LINKDOWN && adapter->link_state == __EDMA_LINKUP) {
- phy_print_status(phydev);
- adapter->link_state = __EDMA_LINKDOWN;
- netif_carrier_off(netdev);
- netif_tx_stop_all_queues(netdev);
- }
-}
-
-/* edma_get_stats()
- * Statistics api used to retreive the tx/rx statistics
- */
-struct net_device_stats *edma_get_stats(struct net_device *netdev)
-{
- struct edma_adapter *adapter = netdev_priv(netdev);
-
- return &adapter->stats;
-}
-
-/* edma_xmit()
- * Main api to be called by the core for packet transmission
- */
-netdev_tx_t edma_xmit(struct sk_buff *skb,
- struct net_device *net_dev)
-{
- struct edma_adapter *adapter = netdev_priv(net_dev);
- struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
- struct edma_tx_desc_ring *etdr;
- u16 from_cpu, dp_bitmap, txq_id;
- int ret, nr_frags = 0, num_tpds_needed = 1, queue_id;
- unsigned int flags_transmit = 0;
- bool packet_is_rstp = false;
- struct netdev_queue *nq = NULL;
-
- if (skb_shinfo(skb)->nr_frags) {
- nr_frags = skb_shinfo(skb)->nr_frags;
- num_tpds_needed += nr_frags;
- } else if (skb_has_frag_list(skb)) {
- struct sk_buff *iter_skb;
-
- skb_walk_frags(skb, iter_skb)
- num_tpds_needed++;
- }
-
- if (num_tpds_needed > EDMA_MAX_SKB_FRAGS) {
- dev_err(&net_dev->dev,
- "skb received with fragments %d which is more than %lu",
- num_tpds_needed, EDMA_MAX_SKB_FRAGS);
- dev_kfree_skb_any(skb);
- adapter->stats.tx_errors++;
- return NETDEV_TX_OK;
- }
-
- if (edma_stp_rstp) {
- u16 ath_hdr, ath_eth_type;
- u8 mac_addr[EDMA_ETH_HDR_LEN];
- ath_eth_type = ntohs(*(uint16_t *)&skb->data[12]);
- if (ath_eth_type == edma_ath_eth_type) {
- packet_is_rstp = true;
- ath_hdr = htons(*(uint16_t *)&skb->data[14]);
- dp_bitmap = ath_hdr & EDMA_TX_ATH_HDR_PORT_BITMAP_MASK;
- from_cpu = (ath_hdr & EDMA_TX_ATH_HDR_FROM_CPU_MASK) >> EDMA_TX_ATH_HDR_FROM_CPU_SHIFT;
- memcpy(mac_addr, skb->data, EDMA_ETH_HDR_LEN);
-
- skb_pull(skb, 4);
-
- memcpy(skb->data, mac_addr, EDMA_ETH_HDR_LEN);
- }
- }
-
- /* this will be one of the 4 TX queues exposed to linux kernel */
- txq_id = skb_get_queue_mapping(skb);
- queue_id = edma_tx_queue_get(adapter, skb, txq_id);
- etdr = edma_cinfo->tpd_ring[queue_id];
- nq = netdev_get_tx_queue(net_dev, txq_id);
-
- local_bh_disable();
- /* Tx is not handled in bottom half context. Hence, we need to protect
- * Tx from tasks and bottom half
- */
-
- if (num_tpds_needed > edma_tpd_available(edma_cinfo, queue_id)) {
- /* not enough descriptor, just stop queue */
- netif_tx_stop_queue(nq);
- local_bh_enable();
- dev_dbg(&net_dev->dev, "Not enough descriptors available");
- edma_cinfo->edma_ethstats.tx_desc_error++;
- return NETDEV_TX_BUSY;
- }
-
- /* Check and mark VLAN tag offload */
- if (unlikely(skb_vlan_tag_present(skb)))
- flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG;
- else if (!adapter->edma_cinfo->is_single_phy && adapter->default_vlan_tag)
- flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG;
-
- /* Check and mark checksum offload */
- if (likely(skb->ip_summed == CHECKSUM_PARTIAL))
- flags_transmit |= EDMA_HW_CHECKSUM;
-
- /* Map and fill descriptor for Tx */
- ret = edma_tx_map_and_fill(edma_cinfo, adapter, skb, queue_id,
- flags_transmit, from_cpu, dp_bitmap, packet_is_rstp, nr_frags);
- if (ret) {
- dev_kfree_skb_any(skb);
- adapter->stats.tx_errors++;
- goto netdev_okay;
- }
-
- /* Update SW producer index */
- edma_tx_update_hw_idx(edma_cinfo, skb, queue_id);
-
- /* update tx statistics */
- adapter->stats.tx_packets++;
- adapter->stats.tx_bytes += skb->len;
-
-netdev_okay:
- local_bh_enable();
- return NETDEV_TX_OK;
-}
-
-/*
- * edma_flow_may_expire()
- * Timer function called periodically to delete the node
- */
-void edma_flow_may_expire(struct timer_list *t)
-{
- struct edma_rfs_flow_table *table = from_timer(table, t, expire_rfs);
- struct edma_adapter *adapter =
- container_of(table, typeof(*adapter), rfs);
- int j;
-
- spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
- for (j = 0; j < EDMA_RFS_EXPIRE_COUNT_PER_CALL; j++) {
- struct hlist_head *hhead;
- struct hlist_node *tmp;
- struct edma_rfs_filter_node *n;
- bool res;
-
- hhead = &adapter->rfs.hlist_head[adapter->rfs.hashtoclean++];
- hlist_for_each_entry_safe(n, tmp, hhead, node) {
- res = rps_may_expire_flow(adapter->netdev, n->rq_id,
- n->flow_id, n->filter_id);
- if (res) {
- int ret;
- ret = edma_delete_rfs_filter(adapter, n);
- if (ret < 0)
- dev_dbg(&adapter->netdev->dev,
- "RFS entry %d not allowed to be flushed by Switch",
- n->flow_id);
- else {
- hlist_del(&n->node);
- kfree(n);
- adapter->rfs.filter_available++;
- }
- }
- }
- }
-
- adapter->rfs.hashtoclean = adapter->rfs.hashtoclean & (EDMA_RFS_FLOW_ENTRIES - 1);
- spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
- mod_timer(&adapter->rfs.expire_rfs, jiffies + HZ / 4);
-}
-
-/* edma_rx_flow_steer()
- * Called by core to to steer the flow to CPU
- */
-int edma_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb,
- u16 rxq, u32 flow_id)
-{
- struct flow_keys keys;
- struct edma_rfs_filter_node *filter_node;
- struct edma_adapter *adapter = netdev_priv(dev);
- u16 hash_tblid;
- int res;
-
- if (skb->protocol == htons(ETH_P_IPV6)) {
- dev_err(&adapter->pdev->dev, "IPv6 not supported\n");
- res = -EINVAL;
- goto no_protocol_err;
- }
-
- /* Dissect flow parameters
- * We only support IPv4 + TCP/UDP
- */
- res = skb_flow_dissect_flow_keys(skb, &keys, 0);
- if (!((keys.basic.ip_proto == IPPROTO_TCP) || (keys.basic.ip_proto == IPPROTO_UDP))) {
- res = -EPROTONOSUPPORT;
- goto no_protocol_err;
- }
-
- /* Check if table entry exists */
- hash_tblid = skb_get_hash_raw(skb) & EDMA_RFS_FLOW_ENTRIES_MASK;
-
- spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
- filter_node = edma_rfs_key_search(&adapter->rfs.hlist_head[hash_tblid], &keys);
-
- if (filter_node) {
- if (rxq == filter_node->rq_id) {
- res = -EEXIST;
- goto out;
- } else {
- res = edma_delete_rfs_filter(adapter, filter_node);
- if (res < 0)
- dev_warn(&adapter->netdev->dev,
- "Cannot steer flow %d to different queue",
- filter_node->flow_id);
- else {
- adapter->rfs.filter_available++;
- res = edma_add_rfs_filter(adapter, &keys, rxq, filter_node);
- if (res < 0) {
- dev_warn(&adapter->netdev->dev,
- "Cannot steer flow %d to different queue",
- filter_node->flow_id);
- } else {
- adapter->rfs.filter_available--;
- filter_node->rq_id = rxq;
- filter_node->filter_id = res;
- }
- }
- }
- } else {
- if (adapter->rfs.filter_available == 0) {
- res = -EBUSY;
- goto out;
- }
-
- filter_node = kmalloc(sizeof(*filter_node), GFP_ATOMIC);
- if (!filter_node) {
- res = -ENOMEM;
- goto out;
- }
-
- res = edma_add_rfs_filter(adapter, &keys, rxq, filter_node);
- if (res < 0) {
- kfree(filter_node);
- goto out;
- }
-
- adapter->rfs.filter_available--;
- filter_node->rq_id = rxq;
- filter_node->filter_id = res;
- filter_node->flow_id = flow_id;
- filter_node->keys = keys;
- INIT_HLIST_NODE(&filter_node->node);
- hlist_add_head(&filter_node->node, &adapter->rfs.hlist_head[hash_tblid]);
- }
-
-out:
- spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
-no_protocol_err:
- return res;
-}
-
-/* edma_register_rfs_filter()
- * Add RFS filter callback
- */
-int edma_register_rfs_filter(struct net_device *netdev,
- set_rfs_filter_callback_t set_filter)
-{
- struct edma_adapter *adapter = netdev_priv(netdev);
-
- spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
-
- if (adapter->set_rfs_rule) {
- spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
- return -1;
- }
-
- adapter->set_rfs_rule = set_filter;
- spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
-
- return 0;
-}
-
-/* edma_alloc_tx_rings()
- * Allocate rx rings
- */
-int edma_alloc_tx_rings(struct edma_common_info *edma_cinfo)
-{
- struct platform_device *pdev = edma_cinfo->pdev;
- int i, err = 0;
-
- for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
- err = edma_alloc_tx_ring(edma_cinfo, edma_cinfo->tpd_ring[i]);
- if (err) {
- dev_err(&pdev->dev, "Tx Queue alloc %u failed\n", i);
- return err;
- }
- }
-
- return 0;
-}
-
-/* edma_free_tx_rings()
- * Free tx rings
- */
-void edma_free_tx_rings(struct edma_common_info *edma_cinfo)
-{
- int i;
-
- for (i = 0; i < edma_cinfo->num_tx_queues; i++)
- edma_free_tx_ring(edma_cinfo, edma_cinfo->tpd_ring[i]);
-}
-
-/* edma_free_tx_resources()
- * Free buffers associated with tx rings
- */
-void edma_free_tx_resources(struct edma_common_info *edma_cinfo)
-{
- struct edma_tx_desc_ring *etdr;
- struct edma_sw_desc *sw_desc;
- struct platform_device *pdev = edma_cinfo->pdev;
- int i, j;
-
- for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
- etdr = edma_cinfo->tpd_ring[i];
- for (j = 0; j < EDMA_TX_RING_SIZE; j++) {
- sw_desc = &etdr->sw_desc[j];
- if (sw_desc->flags & (EDMA_SW_DESC_FLAG_SKB_HEAD |
- EDMA_SW_DESC_FLAG_SKB_FRAG | EDMA_SW_DESC_FLAG_SKB_FRAGLIST))
- edma_tx_unmap_and_free(pdev, sw_desc);
- }
- }
-}
-
-/* edma_alloc_rx_rings()
- * Allocate rx rings
- */
-int edma_alloc_rx_rings(struct edma_common_info *edma_cinfo)
-{
- struct platform_device *pdev = edma_cinfo->pdev;
- int i, j, err = 0;
-
- for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
- err = edma_alloc_rx_ring(edma_cinfo, edma_cinfo->rfd_ring[j]);
- if (err) {
- dev_err(&pdev->dev, "Rx Queue alloc%u failed\n", i);
- return err;
- }
- j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
- }
-
- return 0;
-}
-
-/* edma_free_rx_rings()
- * free rx rings
- */
-void edma_free_rx_rings(struct edma_common_info *edma_cinfo)
-{
- int i, j;
-
- for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
- edma_free_rx_ring(edma_cinfo, edma_cinfo->rfd_ring[j]);
- j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
- }
-}
-
-/* edma_free_queues()
- * Free the queues allocaated
- */
-void edma_free_queues(struct edma_common_info *edma_cinfo)
-{
- int i , j;
-
- for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
- if (edma_cinfo->tpd_ring[i])
- kfree(edma_cinfo->tpd_ring[i]);
- edma_cinfo->tpd_ring[i] = NULL;
- }
-
- for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
- if (edma_cinfo->rfd_ring[j])
- kfree(edma_cinfo->rfd_ring[j]);
- edma_cinfo->rfd_ring[j] = NULL;
- j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
- }
-
- edma_cinfo->num_rx_queues = 0;
- edma_cinfo->num_tx_queues = 0;
-
- return;
-}
-
-/* edma_free_rx_resources()
- * Free buffers associated with tx rings
- */
-void edma_free_rx_resources(struct edma_common_info *edma_cinfo)
-{
- struct edma_rfd_desc_ring *erdr;
- struct edma_sw_desc *sw_desc;
- struct platform_device *pdev = edma_cinfo->pdev;
- int i, j, k;
-
- for (i = 0, k = 0; i < edma_cinfo->num_rx_queues; i++) {
- erdr = edma_cinfo->rfd_ring[k];
- for (j = 0; j < EDMA_RX_RING_SIZE; j++) {
- sw_desc = &erdr->sw_desc[j];
- if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD)) {
- dma_unmap_single(&pdev->dev, sw_desc->dma,
- sw_desc->length, DMA_FROM_DEVICE);
- edma_clean_rfd(erdr, j);
- } else if ((sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAG)) {
- dma_unmap_page(&pdev->dev, sw_desc->dma,
- sw_desc->length, DMA_FROM_DEVICE);
- edma_clean_rfd(erdr, j);
- }
- }
- k += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
-
- }
-}
-
-/* edma_alloc_queues_tx()
- * Allocate memory for all rings
- */
-int edma_alloc_queues_tx(struct edma_common_info *edma_cinfo)
-{
- int i;
-
- for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
- struct edma_tx_desc_ring *etdr;
- etdr = kzalloc(sizeof(struct edma_tx_desc_ring), GFP_KERNEL);
- if (!etdr)
- goto err;
- etdr->count = edma_cinfo->tx_ring_count;
- edma_cinfo->tpd_ring[i] = etdr;
- }
-
- return 0;
-err:
- edma_free_queues(edma_cinfo);
- return -1;
-}
-
-/* edma_alloc_queues_rx()
- * Allocate memory for all rings
- */
-int edma_alloc_queues_rx(struct edma_common_info *edma_cinfo)
-{
- int i, j;
-
- for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
- struct edma_rfd_desc_ring *rfd_ring;
- rfd_ring = kzalloc(sizeof(struct edma_rfd_desc_ring),
- GFP_KERNEL);
- if (!rfd_ring)
- goto err;
- rfd_ring->count = edma_cinfo->rx_ring_count;
- edma_cinfo->rfd_ring[j] = rfd_ring;
- j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
- }
- return 0;
-err:
- edma_free_queues(edma_cinfo);
- return -1;
-}
-
-/* edma_clear_irq_status()
- * Clear interrupt status
- */
-void edma_clear_irq_status()
-{
- edma_write_reg(EDMA_REG_RX_ISR, 0xff);
- edma_write_reg(EDMA_REG_TX_ISR, 0xffff);
- edma_write_reg(EDMA_REG_MISC_ISR, 0x1fff);
- edma_write_reg(EDMA_REG_WOL_ISR, 0x1);
-};
-
-/* edma_configure()
- * Configure skb, edma interrupts and control register.
- */
-int edma_configure(struct edma_common_info *edma_cinfo)
-{
- struct edma_hw *hw = &edma_cinfo->hw;
- u32 intr_modrt_data;
- u32 intr_ctrl_data = 0;
- int i, j, ret_count;
-
- edma_read_reg(EDMA_REG_INTR_CTRL, &intr_ctrl_data);
- intr_ctrl_data &= ~(1 << EDMA_INTR_SW_IDX_W_TYP_SHIFT);
- intr_ctrl_data |= hw->intr_sw_idx_w << EDMA_INTR_SW_IDX_W_TYP_SHIFT;
- edma_write_reg(EDMA_REG_INTR_CTRL, intr_ctrl_data);
-
- edma_clear_irq_status();
-
- /* Clear any WOL status */
- edma_write_reg(EDMA_REG_WOL_CTRL, 0);
- intr_modrt_data = (EDMA_TX_IMT << EDMA_IRQ_MODRT_TX_TIMER_SHIFT);
- intr_modrt_data |= (EDMA_RX_IMT << EDMA_IRQ_MODRT_RX_TIMER_SHIFT);
- edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, intr_modrt_data);
- edma_configure_tx(edma_cinfo);
- edma_configure_rx(edma_cinfo);
-
- /* Allocate the RX buffer */
- for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
- struct edma_rfd_desc_ring *ring = edma_cinfo->rfd_ring[j];
- ret_count = edma_alloc_rx_buf(edma_cinfo, ring, ring->count, j);
- if (ret_count) {
- dev_dbg(&edma_cinfo->pdev->dev, "not all rx buffers allocated\n");
- }
- j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
- }
-
- /* Configure descriptor Ring */
- edma_init_desc(edma_cinfo);
- return 0;
-}
-
-/* edma_irq_enable()
- * Enable default interrupt generation settings
- */
-void edma_irq_enable(struct edma_common_info *edma_cinfo)
-{
- struct edma_hw *hw = &edma_cinfo->hw;
- int i, j;
-
- edma_write_reg(EDMA_REG_RX_ISR, 0xff);
- for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
- edma_write_reg(EDMA_REG_RX_INT_MASK_Q(j), hw->rx_intr_mask);
- j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
- }
- edma_write_reg(EDMA_REG_TX_ISR, 0xffff);
- for (i = 0; i < edma_cinfo->num_tx_queues; i++)
- edma_write_reg(EDMA_REG_TX_INT_MASK_Q(i), hw->tx_intr_mask);
-}
-
-/* edma_irq_disable()
- * Disable Interrupt
- */
-void edma_irq_disable(struct edma_common_info *edma_cinfo)
-{
- int i;
-
- for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++)
- edma_write_reg(EDMA_REG_RX_INT_MASK_Q(i), 0x0);
-
- for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++)
- edma_write_reg(EDMA_REG_TX_INT_MASK_Q(i), 0x0);
- edma_write_reg(EDMA_REG_MISC_IMR, 0);
- edma_write_reg(EDMA_REG_WOL_IMR, 0);
-}
-
-/* edma_free_irqs()
- * Free All IRQs
- */
-void edma_free_irqs(struct edma_adapter *adapter)
-{
- struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
- int i, j;
- int k = ((edma_cinfo->num_rx_queues == 4) ? 1 : 2);
-
- for (i = 0; i < CONFIG_NR_CPUS; i++) {
- for (j = edma_cinfo->edma_percpu_info[i].tx_start; j < (edma_cinfo->edma_percpu_info[i].tx_start + 4); j++)
- free_irq(edma_cinfo->tx_irq[j], &edma_cinfo->edma_percpu_info[i]);
-
- for (j = edma_cinfo->edma_percpu_info[i].rx_start; j < (edma_cinfo->edma_percpu_info[i].rx_start + k); j++)
- free_irq(edma_cinfo->rx_irq[j], &edma_cinfo->edma_percpu_info[i]);
- }
-}
-
-/* edma_enable_rx_ctrl()
- * Enable RX queue control
- */
-void edma_enable_rx_ctrl(struct edma_hw *hw)
-{
- u32 data;
-
- edma_read_reg(EDMA_REG_RXQ_CTRL, &data);
- data |= EDMA_RXQ_CTRL_EN;
- edma_write_reg(EDMA_REG_RXQ_CTRL, data);
-}
-
-
-/* edma_enable_tx_ctrl()
- * Enable TX queue control
- */
-void edma_enable_tx_ctrl(struct edma_hw *hw)
-{
- u32 data;
-
- edma_read_reg(EDMA_REG_TXQ_CTRL, &data);
- data |= EDMA_TXQ_CTRL_TXQ_EN;
- edma_write_reg(EDMA_REG_TXQ_CTRL, data);
-}
-
-/* edma_stop_rx_tx()
- * Disable RX/TQ Queue control
- */
-void edma_stop_rx_tx(struct edma_hw *hw)
-{
- u32 data;
-
- edma_read_reg(EDMA_REG_RXQ_CTRL, &data);
- data &= ~EDMA_RXQ_CTRL_EN;
- edma_write_reg(EDMA_REG_RXQ_CTRL, data);
- edma_read_reg(EDMA_REG_TXQ_CTRL, &data);
- data &= ~EDMA_TXQ_CTRL_TXQ_EN;
- edma_write_reg(EDMA_REG_TXQ_CTRL, data);
-}
-
-/* edma_reset()
- * Reset the EDMA
- */
-int edma_reset(struct edma_common_info *edma_cinfo)
-{
- struct edma_hw *hw = &edma_cinfo->hw;
-
- edma_irq_disable(edma_cinfo);
-
- edma_clear_irq_status();
-
- edma_stop_rx_tx(hw);
-
- return 0;
-}
-
-/* edma_fill_netdev()
- * Fill netdev for each etdr
- */
-int edma_fill_netdev(struct edma_common_info *edma_cinfo, int queue_id,
- int dev, int txq_id)
-{
- struct edma_tx_desc_ring *etdr;
- int i = 0;
-
- etdr = edma_cinfo->tpd_ring[queue_id];
-
- while (etdr->netdev[i])
- i++;
-
- if (i >= EDMA_MAX_NETDEV_PER_QUEUE)
- return -1;
-
- /* Populate the netdev associated with the tpd ring */
- etdr->netdev[i] = edma_netdev[dev];
- etdr->nq[i] = netdev_get_tx_queue(edma_netdev[dev], txq_id);
-
- return 0;
-}
-
-/* edma_set_mac()
- * Change the Ethernet Address of the NIC
- */
-int edma_set_mac_addr(struct net_device *netdev, void *p)
-{
- struct sockaddr *addr = p;
-
- if (!is_valid_ether_addr(addr->sa_data))
- return -EINVAL;
-
- if (netif_running(netdev))
- return -EBUSY;
-
- memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
- return 0;
-}
-
-/* edma_set_stp_rstp()
- * set stp/rstp
- */
-void edma_set_stp_rstp(bool rstp)
-{
- edma_stp_rstp = rstp;
-}
-
-/* edma_assign_ath_hdr_type()
- * assign atheros header eth type
- */
-void edma_assign_ath_hdr_type(int eth_type)
-{
- edma_ath_eth_type = eth_type & EDMA_ETH_TYPE_MASK;
-}
-
-/* edma_get_default_vlan_tag()
- * Used by other modules to get the default vlan tag
- */
-int edma_get_default_vlan_tag(struct net_device *netdev)
-{
- struct edma_adapter *adapter = netdev_priv(netdev);
-
- if (adapter->default_vlan_tag)
- return adapter->default_vlan_tag;
-
- return 0;
-}
-
-/* edma_open()
- * gets called when netdevice is up, start the queue.
- */
-int edma_open(struct net_device *netdev)
-{
- struct edma_adapter *adapter = netdev_priv(netdev);
- struct platform_device *pdev = adapter->edma_cinfo->pdev;
-
- netif_tx_start_all_queues(netdev);
- edma_initialise_rfs_flow_table(adapter);
- set_bit(__EDMA_UP, &adapter->state_flags);
-
- /* if Link polling is enabled, in our case enabled for WAN, then
- * do a phy start, else always set link as UP
- */
- if (adapter->poll_required) {
- if (!IS_ERR(adapter->phydev)) {
- /* AR40xx calibration will leave the PHY in unwanted state,
- * so a soft reset is required before phy_start()
- */
- genphy_soft_reset(adapter->phydev);
- phy_start(adapter->phydev);
- phy_start_aneg(adapter->phydev);
- adapter->link_state = __EDMA_LINKDOWN;
- } else {
- dev_dbg(&pdev->dev, "Invalid PHY device for a link polled interface\n");
- }
- } else {
- adapter->link_state = __EDMA_LINKUP;
- netif_carrier_on(netdev);
- }
-
- return 0;
-}
-
-
-/* edma_close()
- * gets called when netdevice is down, stops the queue.
- */
-int edma_close(struct net_device *netdev)
-{
- struct edma_adapter *adapter = netdev_priv(netdev);
-
- edma_free_rfs_flow_table(adapter);
- netif_carrier_off(netdev);
- netif_tx_stop_all_queues(netdev);
-
- if (adapter->poll_required) {
- if (!IS_ERR(adapter->phydev))
- phy_stop(adapter->phydev);
- }
-
- adapter->link_state = __EDMA_LINKDOWN;
-
- /* Set GMAC state to UP before link state is checked
- */
- clear_bit(__EDMA_UP, &adapter->state_flags);
-
- return 0;
-}
-
-/* edma_poll
- * polling function that gets called when the napi gets scheduled.
- *
- * Main sequence of task performed in this api
- * is clear irq status -> clear_tx_irq -> clean_rx_irq->
- * enable interrupts.
- */
-int edma_poll(struct napi_struct *napi, int budget)
-{
- struct edma_per_cpu_queues_info *edma_percpu_info = container_of(napi,
- struct edma_per_cpu_queues_info, napi);
- struct edma_common_info *edma_cinfo = edma_percpu_info->edma_cinfo;
- u32 reg_data;
- u32 shadow_rx_status, shadow_tx_status;
- int queue_id;
- int i, work_done = 0;
- u16 rx_pending_fill;
-
- /* Store the Rx/Tx status by ANDing it with
- * appropriate CPU RX?TX mask
- */
- edma_read_reg(EDMA_REG_RX_ISR, &reg_data);
- edma_percpu_info->rx_status |= reg_data & edma_percpu_info->rx_mask;
- shadow_rx_status = edma_percpu_info->rx_status;
- edma_read_reg(EDMA_REG_TX_ISR, &reg_data);
- edma_percpu_info->tx_status |= reg_data & edma_percpu_info->tx_mask;
- shadow_tx_status = edma_percpu_info->tx_status;
-
- /* Every core will have a start, which will be computed
- * in probe and stored in edma_percpu_info->tx_start variable.
- * We will shift the status bit by tx_start to obtain
- * status bits for the core on which the current processing
- * is happening. Since, there are 4 tx queues per core,
- * we will run the loop till we get the correct queue to clear.
- */
- while (edma_percpu_info->tx_status) {
- queue_id = ffs(edma_percpu_info->tx_status) - 1;
- edma_tx_complete(edma_cinfo, queue_id);
- edma_percpu_info->tx_status &= ~(1 << queue_id);
- }
-
- /* Every core will have a start, which will be computed
- * in probe and stored in edma_percpu_info->tx_start variable.
- * We will shift the status bit by tx_start to obtain
- * status bits for the core on which the current processing
- * is happening. Since, there are 4 tx queues per core, we
- * will run the loop till we get the correct queue to clear.
- */
- while (edma_percpu_info->rx_status) {
- queue_id = ffs(edma_percpu_info->rx_status) - 1;
- rx_pending_fill = edma_rx_complete(edma_cinfo, &work_done,
- budget, queue_id, napi);
-
- if (likely(work_done < budget)) {
- if (rx_pending_fill) {
- /* reschedule poll() to refill rx buffer deficit */
- work_done = budget;
- break;
- }
- edma_percpu_info->rx_status &= ~(1 << queue_id);
- } else {
- break;
- }
- }
-
- /* Clear the status register, to avoid the interrupts to
- * reoccur.This clearing of interrupt status register is
- * done here as writing to status register only takes place
- * once the producer/consumer index has been updated to
- * reflect that the packet transmission/reception went fine.
- */
- edma_write_reg(EDMA_REG_RX_ISR, shadow_rx_status);
- edma_write_reg(EDMA_REG_TX_ISR, shadow_tx_status);
-
- /* If budget not fully consumed, exit the polling mode */
- if (likely(work_done < budget)) {
- napi_complete(napi);
-
- /* re-enable the interrupts */
- for (i = 0; i < edma_cinfo->num_rxq_per_core; i++)
- edma_write_reg(EDMA_REG_RX_INT_MASK_Q(edma_percpu_info->rx_start + i), 0x1);
- for (i = 0; i < edma_cinfo->num_txq_per_core; i++)
- edma_write_reg(EDMA_REG_TX_INT_MASK_Q(edma_percpu_info->tx_start + i), 0x1);
- }
-
- return work_done;
-}
-
-/* edma interrupt()
- * interrupt handler
- */
-irqreturn_t edma_interrupt(int irq, void *dev)
-{
- struct edma_per_cpu_queues_info *edma_percpu_info = (struct edma_per_cpu_queues_info *) dev;
- struct edma_common_info *edma_cinfo = edma_percpu_info->edma_cinfo;
- int i;
-
- /* Unmask the TX/RX interrupt register */
- for (i = 0; i < edma_cinfo->num_rxq_per_core; i++)
- edma_write_reg(EDMA_REG_RX_INT_MASK_Q(edma_percpu_info->rx_start + i), 0x0);
-
- for (i = 0; i < edma_cinfo->num_txq_per_core; i++)
- edma_write_reg(EDMA_REG_TX_INT_MASK_Q(edma_percpu_info->tx_start + i), 0x0);
-
- napi_schedule(&edma_percpu_info->napi);
-
- return IRQ_HANDLED;
-}
--- a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma.h
+++ /dev/null
@@ -1,455 +0,0 @@
-/*
- * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for
- * any purpose with or without fee is hereby granted, provided that the
- * above copyright notice and this permission notice appear in all copies.
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
- * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef _EDMA_H_
-#define _EDMA_H_
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/io.h>
-#include <linux/vmalloc.h>
-#include <linux/pagemap.h>
-#include <linux/smp.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/clk.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/sysctl.h>
-#include <linux/phy.h>
-#include <linux/of_net.h>
-#include <net/checksum.h>
-#include <net/ip6_checksum.h>
-#include <asm-generic/bug.h>
-#include "ess_edma.h"
-
-#define EDMA_CPU_CORES_SUPPORTED 4
-#define EDMA_MAX_PORTID_SUPPORTED 5
-#define EDMA_MAX_VLAN_SUPPORTED EDMA_MAX_PORTID_SUPPORTED
-#define EDMA_MAX_PORTID_BITMAP_INDEX (EDMA_MAX_PORTID_SUPPORTED + 1)
-#define EDMA_MAX_PORTID_BITMAP_SUPPORTED 0x1f /* 0001_1111 = 0x1f */
-#define EDMA_MAX_NETDEV_PER_QUEUE 4 /* 3 Netdev per queue, 1 space for indexing */
-
-#define EDMA_MAX_RECEIVE_QUEUE 8
-#define EDMA_MAX_TRANSMIT_QUEUE 16
-
-/* WAN/LAN adapter number */
-#define EDMA_WAN 0
-#define EDMA_LAN 1
-
-/* VLAN tag */
-#define EDMA_LAN_DEFAULT_VLAN 1
-#define EDMA_WAN_DEFAULT_VLAN 2
-
-#define EDMA_DEFAULT_GROUP1_VLAN 1
-#define EDMA_DEFAULT_GROUP2_VLAN 2
-#define EDMA_DEFAULT_GROUP3_VLAN 3
-#define EDMA_DEFAULT_GROUP4_VLAN 4
-#define EDMA_DEFAULT_GROUP5_VLAN 5
-
-/* Queues exposed to linux kernel */
-#define EDMA_NETDEV_TX_QUEUE 4
-#define EDMA_NETDEV_RX_QUEUE 4
-
-/* Number of queues per core */
-#define EDMA_NUM_TXQ_PER_CORE 4
-#define EDMA_NUM_RXQ_PER_CORE 2
-
-#define EDMA_TPD_EOP_SHIFT 31
-
-#define EDMA_PORT_ID_SHIFT 12
-#define EDMA_PORT_ID_MASK 0x7
-
-/* tpd word 3 bit 18-28 */
-#define EDMA_TPD_PORT_BITMAP_SHIFT 18
-
-#define EDMA_TPD_FROM_CPU_SHIFT 25
-
-#define EDMA_FROM_CPU_MASK 0x80
-#define EDMA_SKB_PRIORITY_MASK 0x38
-
-/* TX/RX descriptor ring count */
-/* should be a power of 2 */
-#define EDMA_RX_RING_SIZE 128
-#define EDMA_TX_RING_SIZE 128
-
-/* Flags used in paged/non paged mode */
-#define EDMA_RX_HEAD_BUFF_SIZE_JUMBO 256
-#define EDMA_RX_HEAD_BUFF_SIZE 1540
-
-/* MAX frame size supported by switch */
-#define EDMA_MAX_JUMBO_FRAME_SIZE 9216
-
-/* Configurations */
-#define EDMA_INTR_CLEAR_TYPE 0
-#define EDMA_INTR_SW_IDX_W_TYPE 0
-#define EDMA_FIFO_THRESH_TYPE 0
-#define EDMA_RSS_TYPE 0
-#define EDMA_RX_IMT 0x0020
-#define EDMA_TX_IMT 0x0050
-#define EDMA_TPD_BURST 5
-#define EDMA_TXF_BURST 0x100
-#define EDMA_RFD_BURST 8
-#define EDMA_RFD_THR 16
-#define EDMA_RFD_LTHR 0
-
-/* RX/TX per CPU based mask/shift */
-#define EDMA_TX_PER_CPU_MASK 0xF
-#define EDMA_RX_PER_CPU_MASK 0x3
-#define EDMA_TX_PER_CPU_MASK_SHIFT 0x2
-#define EDMA_RX_PER_CPU_MASK_SHIFT 0x1
-#define EDMA_TX_CPU_START_SHIFT 0x2
-#define EDMA_RX_CPU_START_SHIFT 0x1
-
-/* FLags used in transmit direction */
-#define EDMA_HW_CHECKSUM 0x00000001
-#define EDMA_VLAN_TX_TAG_INSERT_FLAG 0x00000002
-#define EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG 0x00000004
-
-#define EDMA_SW_DESC_FLAG_LAST 0x1
-#define EDMA_SW_DESC_FLAG_SKB_HEAD 0x2
-#define EDMA_SW_DESC_FLAG_SKB_FRAG 0x4
-#define EDMA_SW_DESC_FLAG_SKB_FRAGLIST 0x8
-#define EDMA_SW_DESC_FLAG_SKB_NONE 0x10
-#define EDMA_SW_DESC_FLAG_SKB_REUSE 0x20
-
-
-#define EDMA_MAX_SKB_FRAGS (MAX_SKB_FRAGS + 1)
-
-/* Ethtool specific list of EDMA supported features */
-#define EDMA_SUPPORTED_FEATURES (SUPPORTED_10baseT_Half \
- | SUPPORTED_10baseT_Full \
- | SUPPORTED_100baseT_Half \
- | SUPPORTED_100baseT_Full \
- | SUPPORTED_1000baseT_Full)
-
-/* Recevie side atheros Header */
-#define EDMA_RX_ATH_HDR_VERSION 0x2
-#define EDMA_RX_ATH_HDR_VERSION_SHIFT 14
-#define EDMA_RX_ATH_HDR_PRIORITY_SHIFT 11
-#define EDMA_RX_ATH_PORT_TYPE_SHIFT 6
-#define EDMA_RX_ATH_HDR_RSTP_PORT_TYPE 0x4
-
-/* Transmit side atheros Header */
-#define EDMA_TX_ATH_HDR_PORT_BITMAP_MASK 0x7F
-#define EDMA_TX_ATH_HDR_FROM_CPU_MASK 0x80
-#define EDMA_TX_ATH_HDR_FROM_CPU_SHIFT 7
-
-#define EDMA_TXQ_START_CORE0 8
-#define EDMA_TXQ_START_CORE1 12
-#define EDMA_TXQ_START_CORE2 0
-#define EDMA_TXQ_START_CORE3 4
-
-#define EDMA_TXQ_IRQ_MASK_CORE0 0x0F00
-#define EDMA_TXQ_IRQ_MASK_CORE1 0xF000
-#define EDMA_TXQ_IRQ_MASK_CORE2 0x000F
-#define EDMA_TXQ_IRQ_MASK_CORE3 0x00F0
-
-#define EDMA_ETH_HDR_LEN 12
-#define EDMA_ETH_TYPE_MASK 0xFFFF
-
-#define EDMA_RX_BUFFER_WRITE 16
-#define EDMA_RFD_AVAIL_THR 80
-
-#define EDMA_GMAC_NO_MDIO_PHY PHY_MAX_ADDR
-
-extern int ssdk_rfs_ipct_rule_set(__be32 ip_src, __be32 ip_dst,
- __be16 sport, __be16 dport,
- uint8_t proto, u16 loadbalance, bool action);
-struct edma_ethtool_statistics {
- u32 tx_q0_pkt;
- u32 tx_q1_pkt;
- u32 tx_q2_pkt;
- u32 tx_q3_pkt;
- u32 tx_q4_pkt;
- u32 tx_q5_pkt;
- u32 tx_q6_pkt;
- u32 tx_q7_pkt;
- u32 tx_q8_pkt;
- u32 tx_q9_pkt;
- u32 tx_q10_pkt;
- u32 tx_q11_pkt;
- u32 tx_q12_pkt;
- u32 tx_q13_pkt;
- u32 tx_q14_pkt;
- u32 tx_q15_pkt;
- u32 tx_q0_byte;
- u32 tx_q1_byte;
- u32 tx_q2_byte;
- u32 tx_q3_byte;
- u32 tx_q4_byte;
- u32 tx_q5_byte;
- u32 tx_q6_byte;
- u32 tx_q7_byte;
- u32 tx_q8_byte;
- u32 tx_q9_byte;
- u32 tx_q10_byte;
- u32 tx_q11_byte;
- u32 tx_q12_byte;
- u32 tx_q13_byte;
- u32 tx_q14_byte;
- u32 tx_q15_byte;
- u32 rx_q0_pkt;
- u32 rx_q1_pkt;
- u32 rx_q2_pkt;
- u32 rx_q3_pkt;
- u32 rx_q4_pkt;
- u32 rx_q5_pkt;
- u32 rx_q6_pkt;
- u32 rx_q7_pkt;
- u32 rx_q0_byte;
- u32 rx_q1_byte;
- u32 rx_q2_byte;
- u32 rx_q3_byte;
- u32 rx_q4_byte;
- u32 rx_q5_byte;
- u32 rx_q6_byte;
- u32 rx_q7_byte;
- u32 tx_desc_error;
- u32 rx_alloc_fail_ctr;
-};
-
-struct edma_mdio_data {
- struct mii_bus *mii_bus;
- void __iomem *membase;
- int phy_irq[PHY_MAX_ADDR];
-};
-
-/* EDMA LINK state */
-enum edma_link_state {
- __EDMA_LINKUP, /* Indicate link is UP */
- __EDMA_LINKDOWN /* Indicate link is down */
-};
-
-/* EDMA GMAC state */
-enum edma_gmac_state {
- __EDMA_UP /* use to indicate GMAC is up */
-};
-
-/* edma transmit descriptor */
-struct edma_tx_desc {
- __le16 len; /* full packet including CRC */
- __le16 svlan_tag; /* vlan tag */
- __le32 word1; /* byte 4-7 */
- __le32 addr; /* address of buffer */
- __le32 word3; /* byte 12 */
-};
-
-/* edma receive return descriptor */
-struct edma_rx_return_desc {
- u16 rrd0;
- u16 rrd1;
- u16 rrd2;
- u16 rrd3;
- u16 rrd4;
- u16 rrd5;
- u16 rrd6;
- u16 rrd7;
-};
-
-/* RFD descriptor */
-struct edma_rx_free_desc {
- __le32 buffer_addr; /* buffer address */
-};
-
-/* edma hw specific data */
-struct edma_hw {
- u32 __iomem *hw_addr; /* inner register address */
- struct edma_adapter *adapter; /* netdevice adapter */
- u32 rx_intr_mask; /*rx interrupt mask */
- u32 tx_intr_mask; /* tx interrupt nask */
- u32 misc_intr_mask; /* misc interrupt mask */
- u32 wol_intr_mask; /* wake on lan interrupt mask */
- bool intr_clear_type; /* interrupt clear */
- bool intr_sw_idx_w; /* interrupt software index */
- u32 rx_head_buff_size; /* Rx buffer size */
- u8 rss_type; /* rss protocol type */
-};
-
-/* edma_sw_desc stores software descriptor
- * SW descriptor has 1:1 map with HW descriptor
- */
-struct edma_sw_desc {
- struct sk_buff *skb;
- dma_addr_t dma; /* dma address */
- u16 length; /* Tx/Rx buffer length */
- u32 flags;
-};
-
-/* per core related information */
-struct edma_per_cpu_queues_info {
- struct napi_struct napi; /* napi associated with the core */
- u32 tx_mask; /* tx interrupt mask */
- u32 rx_mask; /* rx interrupt mask */
- u32 tx_status; /* tx interrupt status */
- u32 rx_status; /* rx interrupt status */
- u32 tx_start; /* tx queue start */
- u32 rx_start; /* rx queue start */
- struct edma_common_info *edma_cinfo; /* edma common info */
-};
-
-/* edma specific common info */
-struct edma_common_info {
- struct edma_tx_desc_ring *tpd_ring[16]; /* 16 Tx queues */
- struct edma_rfd_desc_ring *rfd_ring[8]; /* 8 Rx queues */
- struct platform_device *pdev; /* device structure */
- struct net_device *netdev[EDMA_MAX_PORTID_SUPPORTED];
- struct net_device *portid_netdev_lookup_tbl[EDMA_MAX_PORTID_BITMAP_INDEX];
- struct ctl_table_header *edma_ctl_table_hdr;
- int num_gmac;
- struct edma_ethtool_statistics edma_ethstats; /* ethtool stats */
- int num_rx_queues; /* number of rx queue */
- u32 num_tx_queues; /* number of tx queue */
- u32 tx_irq[16]; /* number of tx irq */
- u32 rx_irq[8]; /* number of rx irq */
- u32 from_cpu; /* from CPU TPD field */
- u32 num_rxq_per_core; /* Rx queues per core */
- u32 num_txq_per_core; /* Tx queues per core */
- u16 tx_ring_count; /* Tx ring count */
- u16 rx_ring_count; /* Rx ring*/
- u16 rx_head_buffer_len; /* rx buffer length */
- u16 rx_page_buffer_len; /* rx buffer length */
- u32 page_mode; /* Jumbo frame supported flag */
- u32 fraglist_mode; /* fraglist supported flag */
- struct edma_hw hw; /* edma hw specific structure */
- struct edma_per_cpu_queues_info edma_percpu_info[CONFIG_NR_CPUS]; /* per cpu information */
- spinlock_t stats_lock; /* protect edma stats area for updation */
- struct timer_list edma_stats_timer;
- bool is_single_phy;
- void __iomem *ess_hw_addr;
- struct clk *ess_clk;
-};
-
-/* transimit packet descriptor (tpd) ring */
-struct edma_tx_desc_ring {
- struct netdev_queue *nq[EDMA_MAX_NETDEV_PER_QUEUE]; /* Linux queue index */
- struct net_device *netdev[EDMA_MAX_NETDEV_PER_QUEUE];
- /* Array of netdevs associated with the tpd ring */
- void *hw_desc; /* descriptor ring virtual address */
- struct edma_sw_desc *sw_desc; /* buffer associated with ring */
- int netdev_bmp; /* Bitmap for per-ring netdevs */
- u32 size; /* descriptor ring length in bytes */
- u16 count; /* number of descriptors in the ring */
- dma_addr_t dma; /* descriptor ring physical address */
- u16 sw_next_to_fill; /* next Tx descriptor to fill */
- u16 sw_next_to_clean; /* next Tx descriptor to clean */
-};
-
-/* receive free descriptor (rfd) ring */
-struct edma_rfd_desc_ring {
- void *hw_desc; /* descriptor ring virtual address */
- struct edma_sw_desc *sw_desc; /* buffer associated with ring */
- u16 size; /* bytes allocated to sw_desc */
- u16 count; /* number of descriptors in the ring */
- dma_addr_t dma; /* descriptor ring physical address */
- u16 sw_next_to_fill; /* next descriptor to fill */
- u16 sw_next_to_clean; /* next descriptor to clean */
- u16 pending_fill; /* fill pending from previous iteration */
-};
-
-/* edma_rfs_flter_node - rfs filter node in hash table */
-struct edma_rfs_filter_node {
- struct flow_keys keys;
- u32 flow_id; /* flow_id of filter provided by kernel */
- u16 filter_id; /* filter id of filter returned by adaptor */
- u16 rq_id; /* desired rq index */
- struct hlist_node node; /* edma rfs list node */
-};
-
-/* edma_rfs_flow_tbl - rfs flow table */
-struct edma_rfs_flow_table {
- u16 max_num_filter; /* Maximum number of filters edma supports */
- u16 hashtoclean; /* hash table index to clean next */
- int filter_available; /* Number of free filters available */
- struct hlist_head hlist_head[EDMA_RFS_FLOW_ENTRIES];
- spinlock_t rfs_ftab_lock;
- struct timer_list expire_rfs; /* timer function for edma_rps_may_expire_flow */
-};
-
-/* EDMA net device structure */
-struct edma_adapter {
- struct net_device *netdev; /* netdevice */
- struct platform_device *pdev; /* platform device */
- struct edma_common_info *edma_cinfo; /* edma common info */
- struct phy_device *phydev; /* Phy device */
- struct edma_rfs_flow_table rfs; /* edma rfs flow table */
- struct net_device_stats stats; /* netdev statistics */
- set_rfs_filter_callback_t set_rfs_rule;
- u32 flags;/* status flags */
- unsigned long state_flags; /* GMAC up/down flags */
- u32 forced_speed; /* link force speed */
- u32 forced_duplex; /* link force duplex */
- u32 link_state; /* phy link state */
- u32 phy_mdio_addr; /* PHY device address on MII interface */
- u32 poll_required; /* check if link polling is required */
- u32 tx_start_offset[CONFIG_NR_CPUS]; /* tx queue start */
- u32 default_vlan_tag; /* vlan tag */
- u32 dp_bitmap;
- uint8_t phy_id[MII_BUS_ID_SIZE + 3];
-};
-
-int edma_alloc_queues_tx(struct edma_common_info *edma_cinfo);
-int edma_alloc_queues_rx(struct edma_common_info *edma_cinfo);
-int edma_open(struct net_device *netdev);
-int edma_close(struct net_device *netdev);
-void edma_free_tx_resources(struct edma_common_info *edma_c_info);
-void edma_free_rx_resources(struct edma_common_info *edma_c_info);
-int edma_alloc_tx_rings(struct edma_common_info *edma_cinfo);
-int edma_alloc_rx_rings(struct edma_common_info *edma_cinfo);
-void edma_free_tx_rings(struct edma_common_info *edma_cinfo);
-void edma_free_rx_rings(struct edma_common_info *edma_cinfo);
-void edma_free_queues(struct edma_common_info *edma_cinfo);
-void edma_irq_disable(struct edma_common_info *edma_cinfo);
-int edma_reset(struct edma_common_info *edma_cinfo);
-int edma_poll(struct napi_struct *napi, int budget);
-netdev_tx_t edma_xmit(struct sk_buff *skb,
- struct net_device *netdev);
-int edma_configure(struct edma_common_info *edma_cinfo);
-void edma_irq_enable(struct edma_common_info *edma_cinfo);
-void edma_enable_tx_ctrl(struct edma_hw *hw);
-void edma_enable_rx_ctrl(struct edma_hw *hw);
-void edma_stop_rx_tx(struct edma_hw *hw);
-void edma_free_irqs(struct edma_adapter *adapter);
-irqreturn_t edma_interrupt(int irq, void *dev);
-void edma_write_reg(u16 reg_addr, u32 reg_value);
-void edma_read_reg(u16 reg_addr, volatile u32 *reg_value);
-struct net_device_stats *edma_get_stats(struct net_device *netdev);
-int edma_set_mac_addr(struct net_device *netdev, void *p);
-int edma_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb,
- u16 rxq, u32 flow_id);
-int edma_register_rfs_filter(struct net_device *netdev,
- set_rfs_filter_callback_t set_filter);
-void edma_flow_may_expire(struct timer_list *t);
-void edma_set_ethtool_ops(struct net_device *netdev);
-void edma_set_stp_rstp(bool tag);
-void edma_assign_ath_hdr_type(int tag);
-int edma_get_default_vlan_tag(struct net_device *netdev);
-void edma_adjust_link(struct net_device *netdev);
-int edma_fill_netdev(struct edma_common_info *edma_cinfo, int qid, int num, int txq_id);
-void edma_read_append_stats(struct edma_common_info *edma_cinfo);
-void edma_change_tx_coalesce(int usecs);
-void edma_change_rx_coalesce(int usecs);
-void edma_get_tx_rx_coalesce(u32 *reg_val);
-void edma_clear_irq_status(void);
-void ess_set_port_status_speed(struct edma_common_info *edma_cinfo,
- struct phy_device *phydev, uint8_t port_id);
-#endif /* _EDMA_H_ */
--- a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
+++ /dev/null
@@ -1,1346 +0,0 @@
-/*
- * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for
- * any purpose with or without fee is hereby granted, provided that the
- * above copyright notice and this permission notice appear in all copies.
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
- * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <linux/cpu_rmap.h>
-#include <linux/of.h>
-#include <linux/of_net.h>
-#include <linux/timer.h>
-#include <linux/of_platform.h>
-#include <linux/of_address.h>
-#include <linux/of_mdio.h>
-#include <linux/clk.h>
-#include <linux/string.h>
-#include <linux/reset.h>
-#include <linux/version.h>
-#include "edma.h"
-#include "ess_edma.h"
-
-/* Weight round robin and virtual QID mask */
-#define EDMA_WRR_VID_SCTL_MASK 0xffff
-
-/* Weight round robin and virtual QID shift */
-#define EDMA_WRR_VID_SCTL_SHIFT 16
-
-char edma_axi_driver_name[] = "ess_edma";
-static const u32 default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE |
- NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP;
-
-static u32 edma_hw_addr;
-
-char edma_tx_irq[16][64];
-char edma_rx_irq[8][64];
-struct net_device *edma_netdev[EDMA_MAX_PORTID_SUPPORTED];
-static u16 tx_start[4] = {EDMA_TXQ_START_CORE0, EDMA_TXQ_START_CORE1,
- EDMA_TXQ_START_CORE2, EDMA_TXQ_START_CORE3};
-static u32 tx_mask[4] = {EDMA_TXQ_IRQ_MASK_CORE0, EDMA_TXQ_IRQ_MASK_CORE1,
- EDMA_TXQ_IRQ_MASK_CORE2, EDMA_TXQ_IRQ_MASK_CORE3};
-
-static u32 edma_default_ltag __read_mostly = EDMA_LAN_DEFAULT_VLAN;
-static u32 edma_default_wtag __read_mostly = EDMA_WAN_DEFAULT_VLAN;
-static u32 edma_default_group1_vtag __read_mostly = EDMA_DEFAULT_GROUP1_VLAN;
-static u32 edma_default_group2_vtag __read_mostly = EDMA_DEFAULT_GROUP2_VLAN;
-static u32 edma_default_group3_vtag __read_mostly = EDMA_DEFAULT_GROUP3_VLAN;
-static u32 edma_default_group4_vtag __read_mostly = EDMA_DEFAULT_GROUP4_VLAN;
-static u32 edma_default_group5_vtag __read_mostly = EDMA_DEFAULT_GROUP5_VLAN;
-static u32 edma_rss_idt_val = EDMA_RSS_IDT_VALUE;
-static u32 edma_rss_idt_idx;
-
-static int edma_weight_assigned_to_q __read_mostly;
-static int edma_queue_to_virtual_q __read_mostly;
-static bool edma_enable_rstp __read_mostly;
-static int edma_athr_hdr_eth_type __read_mostly;
-
-static int page_mode;
-module_param(page_mode, int, 0);
-MODULE_PARM_DESC(page_mode, "enable page mode");
-
-static int overwrite_mode;
-module_param(overwrite_mode, int, 0);
-MODULE_PARM_DESC(overwrite_mode, "overwrite default page_mode setting");
-
-static int jumbo_mru = EDMA_RX_HEAD_BUFF_SIZE;
-module_param(jumbo_mru, int, 0);
-MODULE_PARM_DESC(jumbo_mru, "enable fraglist support");
-
-static int num_rxq = 4;
-module_param(num_rxq, int, 0);
-MODULE_PARM_DESC(num_rxq, "change the number of rx queues");
-
-void edma_write_reg(u16 reg_addr, u32 reg_value)
-{
- writel(reg_value, ((void __iomem *)(edma_hw_addr + reg_addr)));
-}
-
-void edma_read_reg(u16 reg_addr, volatile u32 *reg_value)
-{
- *reg_value = readl((void __iomem *)(edma_hw_addr + reg_addr));
-}
-
-static void ess_write_reg(struct edma_common_info *edma, u16 reg_addr, u32 reg_value)
-{
- writel(reg_value, ((void __iomem *)
- ((unsigned long)edma->ess_hw_addr + reg_addr)));
-}
-
-static void ess_read_reg(struct edma_common_info *edma, u16 reg_addr,
- volatile u32 *reg_value)
-{
- *reg_value = readl((void __iomem *)
- ((unsigned long)edma->ess_hw_addr + reg_addr));
-}
-
-static int ess_reset(struct edma_common_info *edma)
-{
- struct device_node *switch_node = NULL;
- struct reset_control *ess_rst;
- u32 regval;
-
- switch_node = of_find_node_by_name(NULL, "ess-switch");
- if (!switch_node) {
- pr_err("switch-node not found\n");
- return -EINVAL;
- }
-
- ess_rst = of_reset_control_get(switch_node, "ess_rst");
- of_node_put(switch_node);
-
- if (IS_ERR(ess_rst)) {
- pr_err("failed to find ess_rst!\n");
- return -ENOENT;
- }
-
- reset_control_assert(ess_rst);
- msleep(10);
- reset_control_deassert(ess_rst);
- msleep(100);
- reset_control_put(ess_rst);
-
- /* Enable only port 5 <--> port 0
- * bits 0:6 bitmap of ports it can fwd to */
-#define SET_PORT_BMP(r,v) \
- ess_read_reg(edma, r, &regval); \
- ess_write_reg(edma, r, ((regval & ~0x3F) | v));
-
- SET_PORT_BMP(ESS_PORT0_LOOKUP_CTRL,0x20);
- SET_PORT_BMP(ESS_PORT1_LOOKUP_CTRL,0x00);
- SET_PORT_BMP(ESS_PORT2_LOOKUP_CTRL,0x00);
- SET_PORT_BMP(ESS_PORT3_LOOKUP_CTRL,0x00);
- SET_PORT_BMP(ESS_PORT4_LOOKUP_CTRL,0x00);
- SET_PORT_BMP(ESS_PORT5_LOOKUP_CTRL,0x01);
- ess_write_reg(edma, ESS_RGMII_CTRL, 0x400);
- ess_write_reg(edma, ESS_PORT0_STATUS, ESS_PORT_1G_FDX);
- ess_write_reg(edma, ESS_PORT5_STATUS, ESS_PORT_1G_FDX);
- ess_write_reg(edma, ESS_PORT0_HEADER_CTRL, 0);
-#undef SET_PORT_BMP
-
- /* forward multicast and broadcast frames to CPU */
- ess_write_reg(edma, ESS_FWD_CTRL1,
- (ESS_PORTS_ALL << ESS_FWD_CTRL1_UC_FLOOD_S) |
- (ESS_PORTS_ALL << ESS_FWD_CTRL1_MC_FLOOD_S) |
- (ESS_PORTS_ALL << ESS_FWD_CTRL1_BC_FLOOD_S));
-
- return 0;
-}
-
-void ess_set_port_status_speed(struct edma_common_info *edma,
- struct phy_device *phydev, uint8_t port_id)
-{
- uint16_t reg_off = ESS_PORT0_STATUS + (4 * port_id);
- uint32_t reg_val = 0;
-
- ess_read_reg(edma, reg_off, &reg_val);
-
- /* reset the speed bits [0:1] */
- reg_val &= ~ESS_PORT_STATUS_SPEED_INV;
-
- /* set the new speed */
- switch(phydev->speed) {
- case SPEED_1000: reg_val |= ESS_PORT_STATUS_SPEED_1000; break;
- case SPEED_100: reg_val |= ESS_PORT_STATUS_SPEED_100; break;
- case SPEED_10: reg_val |= ESS_PORT_STATUS_SPEED_10; break;
- default: reg_val |= ESS_PORT_STATUS_SPEED_INV; break;
- }
-
- /* check full/half duplex */
- if (phydev->duplex) {
- reg_val |= ESS_PORT_STATUS_DUPLEX_MODE;
- } else {
- reg_val &= ~ESS_PORT_STATUS_DUPLEX_MODE;
- }
-
- ess_write_reg(edma, reg_off, reg_val);
-}
-
-/* edma_change_tx_coalesce()
- * change tx interrupt moderation timer
- */
-void edma_change_tx_coalesce(int usecs)
-{
- u32 reg_value;
-
- /* Here, we right shift the value from the user by 1, this is
- * done because IMT resolution timer is 2usecs. 1 count
- * of this register corresponds to 2 usecs.
- */
- edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, &reg_value);
- reg_value = ((reg_value & 0xffff) | ((usecs >> 1) << 16));
- edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_value);
-}
-
-/* edma_change_rx_coalesce()
- * change rx interrupt moderation timer
- */
-void edma_change_rx_coalesce(int usecs)
-{
- u32 reg_value;
-
- /* Here, we right shift the value from the user by 1, this is
- * done because IMT resolution timer is 2usecs. 1 count
- * of this register corresponds to 2 usecs.
- */
- edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, &reg_value);
- reg_value = ((reg_value & 0xffff0000) | (usecs >> 1));
- edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_value);
-}
-
-/* edma_get_tx_rx_coalesce()
- * Get tx/rx interrupt moderation value
- */
-void edma_get_tx_rx_coalesce(u32 *reg_val)
-{
- edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_val);
-}
-
-void edma_read_append_stats(struct edma_common_info *edma_cinfo)
-{
- uint32_t *p;
- int i;
- u32 stat;
-
- spin_lock_bh(&edma_cinfo->stats_lock);
- p = (uint32_t *)&(edma_cinfo->edma_ethstats);
-
- for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) {
- edma_read_reg(EDMA_REG_TX_STAT_PKT_Q(i), &stat);
- *p += stat;
- p++;
- }
-
- for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) {
- edma_read_reg(EDMA_REG_TX_STAT_BYTE_Q(i), &stat);
- *p += stat;
- p++;
- }
-
- for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) {
- edma_read_reg(EDMA_REG_RX_STAT_PKT_Q(i), &stat);
- *p += stat;
- p++;
- }
-
- for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) {
- edma_read_reg(EDMA_REG_RX_STAT_BYTE_Q(i), &stat);
- *p += stat;
- p++;
- }
-
- spin_unlock_bh(&edma_cinfo->stats_lock);
-}
-
-static void edma_statistics_timer(struct timer_list *t)
-{
- struct edma_common_info *edma_cinfo =
- from_timer(edma_cinfo, t, edma_stats_timer);
-
- edma_read_append_stats(edma_cinfo);
-
- mod_timer(&edma_cinfo->edma_stats_timer, jiffies + 1*HZ);
-}
-
-static int edma_enable_stp_rstp(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- int ret;
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
- if (write)
- edma_set_stp_rstp(edma_enable_rstp);
-
- return ret;
-}
-
-static int edma_ath_hdr_eth_type(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- int ret;
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
- if (write)
- edma_assign_ath_hdr_type(edma_athr_hdr_eth_type);
-
- return ret;
-}
-
-static int edma_change_default_lan_vlan(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- struct edma_adapter *adapter;
- int ret;
-
- if (!edma_netdev[1]) {
- pr_err("Netdevice for default_lan does not exist\n");
- return -1;
- }
-
- adapter = netdev_priv(edma_netdev[1]);
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
-
- if (write)
- adapter->default_vlan_tag = edma_default_ltag;
-
- return ret;
-}
-
-static int edma_change_default_wan_vlan(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- struct edma_adapter *adapter;
- int ret;
-
- if (!edma_netdev[0]) {
- pr_err("Netdevice for default_wan does not exist\n");
- return -1;
- }
-
- adapter = netdev_priv(edma_netdev[0]);
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
-
- if (write)
- adapter->default_vlan_tag = edma_default_wtag;
-
- return ret;
-}
-
-static int edma_change_group1_vtag(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- struct edma_adapter *adapter;
- struct edma_common_info *edma_cinfo;
- int ret;
-
- if (!edma_netdev[0]) {
- pr_err("Netdevice for Group 1 does not exist\n");
- return -1;
- }
-
- adapter = netdev_priv(edma_netdev[0]);
- edma_cinfo = adapter->edma_cinfo;
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
-
- if (write)
- adapter->default_vlan_tag = edma_default_group1_vtag;
-
- return ret;
-}
-
-static int edma_change_group2_vtag(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- struct edma_adapter *adapter;
- struct edma_common_info *edma_cinfo;
- int ret;
-
- if (!edma_netdev[1]) {
- pr_err("Netdevice for Group 2 does not exist\n");
- return -1;
- }
-
- adapter = netdev_priv(edma_netdev[1]);
- edma_cinfo = adapter->edma_cinfo;
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
-
- if (write)
- adapter->default_vlan_tag = edma_default_group2_vtag;
-
- return ret;
-}
-
-static int edma_change_group3_vtag(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- struct edma_adapter *adapter;
- struct edma_common_info *edma_cinfo;
- int ret;
-
- if (!edma_netdev[2]) {
- pr_err("Netdevice for Group 3 does not exist\n");
- return -1;
- }
-
- adapter = netdev_priv(edma_netdev[2]);
- edma_cinfo = adapter->edma_cinfo;
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
-
- if (write)
- adapter->default_vlan_tag = edma_default_group3_vtag;
-
- return ret;
-}
-
-static int edma_change_group4_vtag(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- struct edma_adapter *adapter;
- struct edma_common_info *edma_cinfo;
- int ret;
-
- if (!edma_netdev[3]) {
- pr_err("Netdevice for Group 4 does not exist\n");
- return -1;
- }
-
- adapter = netdev_priv(edma_netdev[3]);
- edma_cinfo = adapter->edma_cinfo;
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
-
- if (write)
- adapter->default_vlan_tag = edma_default_group4_vtag;
-
- return ret;
-}
-
-static int edma_change_group5_vtag(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- struct edma_adapter *adapter;
- struct edma_common_info *edma_cinfo;
- int ret;
-
- if (!edma_netdev[4]) {
- pr_err("Netdevice for Group 5 does not exist\n");
- return -1;
- }
-
- adapter = netdev_priv(edma_netdev[4]);
- edma_cinfo = adapter->edma_cinfo;
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
-
- if (write)
- adapter->default_vlan_tag = edma_default_group5_vtag;
-
- return ret;
-}
-
-static int edma_set_rss_idt_value(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- int ret;
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
- if (write && !ret)
- edma_write_reg(EDMA_REG_RSS_IDT(edma_rss_idt_idx),
- edma_rss_idt_val);
- return ret;
-}
-
-static int edma_set_rss_idt_idx(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- int ret;
- u32 old_value = edma_rss_idt_idx;
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
- if (!write || ret)
- return ret;
-
- if (edma_rss_idt_idx >= EDMA_NUM_IDT) {
- pr_err("Invalid RSS indirection table index %d\n",
- edma_rss_idt_idx);
- edma_rss_idt_idx = old_value;
- return -EINVAL;
- }
- return ret;
-}
-
-static int edma_weight_assigned_to_queues(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- int ret, queue_id, weight;
- u32 reg_data, data, reg_addr;
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
- if (write) {
- queue_id = edma_weight_assigned_to_q & EDMA_WRR_VID_SCTL_MASK;
- if (queue_id < 0 || queue_id > 15) {
- pr_err("queue_id not within desired range\n");
- return -EINVAL;
- }
-
- weight = edma_weight_assigned_to_q >> EDMA_WRR_VID_SCTL_SHIFT;
- if (weight < 0 || weight > 0xF) {
- pr_err("queue_id not within desired range\n");
- return -EINVAL;
- }
-
- data = weight << EDMA_WRR_SHIFT(queue_id);
-
- reg_addr = EDMA_REG_WRR_CTRL_Q0_Q3 + (queue_id & ~0x3);
- edma_read_reg(reg_addr, &reg_data);
- reg_data &= ~(1 << EDMA_WRR_SHIFT(queue_id));
- edma_write_reg(reg_addr, data | reg_data);
- }
-
- return ret;
-}
-
-static int edma_queue_to_virtual_queue_map(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- int ret, queue_id, virtual_qid;
- u32 reg_data, data, reg_addr;
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
- if (write) {
- queue_id = edma_queue_to_virtual_q & EDMA_WRR_VID_SCTL_MASK;
- if (queue_id < 0 || queue_id > 15) {
- pr_err("queue_id not within desired range\n");
- return -EINVAL;
- }
-
- virtual_qid = edma_queue_to_virtual_q >>
- EDMA_WRR_VID_SCTL_SHIFT;
- if (virtual_qid < 0 || virtual_qid > 8) {
- pr_err("queue_id not within desired range\n");
- return -EINVAL;
- }
-
- data = virtual_qid << EDMA_VQ_ID_SHIFT(queue_id);
-
- reg_addr = EDMA_REG_VQ_CTRL0 + (queue_id & ~0x3);
- edma_read_reg(reg_addr, &reg_data);
- reg_data &= ~(1 << EDMA_VQ_ID_SHIFT(queue_id));
- edma_write_reg(reg_addr, data | reg_data);
- }
-
- return ret;
-}
-
-static struct ctl_table edma_table[] = {
- {
- .procname = "default_lan_tag",
- .data = &edma_default_ltag,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_change_default_lan_vlan
- },
- {
- .procname = "default_wan_tag",
- .data = &edma_default_wtag,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_change_default_wan_vlan
- },
- {
- .procname = "weight_assigned_to_queues",
- .data = &edma_weight_assigned_to_q,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_weight_assigned_to_queues
- },
- {
- .procname = "queue_to_virtual_queue_map",
- .data = &edma_queue_to_virtual_q,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_queue_to_virtual_queue_map
- },
- {
- .procname = "enable_stp_rstp",
- .data = &edma_enable_rstp,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_enable_stp_rstp
- },
- {
- .procname = "athr_hdr_eth_type",
- .data = &edma_athr_hdr_eth_type,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_ath_hdr_eth_type
- },
- {
- .procname = "default_group1_vlan_tag",
- .data = &edma_default_group1_vtag,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_change_group1_vtag
- },
- {
- .procname = "default_group2_vlan_tag",
- .data = &edma_default_group2_vtag,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_change_group2_vtag
- },
- {
- .procname = "default_group3_vlan_tag",
- .data = &edma_default_group3_vtag,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_change_group3_vtag
- },
- {
- .procname = "default_group4_vlan_tag",
- .data = &edma_default_group4_vtag,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_change_group4_vtag
- },
- {
- .procname = "default_group5_vlan_tag",
- .data = &edma_default_group5_vtag,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_change_group5_vtag
- },
- {
- .procname = "edma_rss_idt_value",
- .data = &edma_rss_idt_val,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_set_rss_idt_value
- },
- {
- .procname = "edma_rss_idt_idx",
- .data = &edma_rss_idt_idx,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_set_rss_idt_idx
- },
- {}
-};
-
-static int ess_parse(struct edma_common_info *edma)
-{
- struct device_node *switch_node;
- int ret = -EINVAL;
-
- switch_node = of_find_node_by_name(NULL, "ess-switch");
- if (!switch_node) {
- pr_err("cannot find ess-switch node\n");
- goto out;
- }
-
- edma->ess_hw_addr = of_io_request_and_map(switch_node,
- 0, KBUILD_MODNAME);
- if (!edma->ess_hw_addr) {
- pr_err("%s ioremap fail.", __func__);
- goto out;
- }
-
- edma->ess_clk = of_clk_get_by_name(switch_node, "ess_clk");
- ret = clk_prepare_enable(edma->ess_clk);
-out:
- of_node_put(switch_node);
- return ret;
-}
-
-/* edma_axi_netdev_ops
- * Describe the operations supported by registered netdevices
- *
- * static const struct net_device_ops edma_axi_netdev_ops = {
- * .ndo_open = edma_open,
- * .ndo_stop = edma_close,
- * .ndo_start_xmit = edma_xmit_frame,
- * .ndo_set_mac_address = edma_set_mac_addr,
- * }
- */
-static const struct net_device_ops edma_axi_netdev_ops = {
- .ndo_open = edma_open,
- .ndo_stop = edma_close,
- .ndo_start_xmit = edma_xmit,
- .ndo_set_mac_address = edma_set_mac_addr,
-#ifdef CONFIG_RFS_ACCEL
- .ndo_rx_flow_steer = edma_rx_flow_steer,
- .ndo_register_rfs_filter = edma_register_rfs_filter,
- .ndo_get_default_vlan_tag = edma_get_default_vlan_tag,
-#endif
- .ndo_get_stats = edma_get_stats,
-};
-
-/* edma_axi_probe()
- * Initialise an adapter identified by a platform_device structure.
- *
- * The OS initialization, configuring of the adapter private structure,
- * and a hardware reset occur in the probe.
- */
-static int edma_axi_probe(struct platform_device *pdev)
-{
- struct edma_common_info *edma_cinfo;
- struct edma_hw *hw;
- struct edma_adapter *adapter[EDMA_MAX_PORTID_SUPPORTED];
- struct resource *res;
- struct device_node *np = pdev->dev.of_node;
- struct device_node *pnp;
- struct device_node *mdio_node = NULL;
- struct mii_bus *miibus = NULL;
- int i, j, k, err = 0;
- int portid_bmp;
- int idx = 0, idx_mac = 0;
-
- if (CONFIG_NR_CPUS != EDMA_CPU_CORES_SUPPORTED) {
- dev_err(&pdev->dev, "Invalid CPU Cores\n");
- return -EINVAL;
- }
-
- if ((num_rxq != 4) && (num_rxq != 8)) {
- dev_err(&pdev->dev, "Invalid RX queue, edma probe failed\n");
- return -EINVAL;
- }
- edma_cinfo = kzalloc(sizeof(struct edma_common_info), GFP_KERNEL);
- if (!edma_cinfo) {
- err = -ENOMEM;
- goto err_alloc;
- }
-
- edma_cinfo->pdev = pdev;
-
- of_property_read_u32(np, "qcom,num_gmac", &edma_cinfo->num_gmac);
- if (edma_cinfo->num_gmac > EDMA_MAX_PORTID_SUPPORTED) {
- pr_err("Invalid DTSI Entry for qcom,num_gmac\n");
- err = -EINVAL;
- goto err_cinfo;
- }
-
- /* Initialize the netdev array before allocation
- * to avoid double free
- */
- for (i = 0 ; i < edma_cinfo->num_gmac ; i++)
- edma_netdev[i] = NULL;
-
- for (i = 0 ; i < edma_cinfo->num_gmac ; i++) {
- edma_netdev[i] = alloc_etherdev_mqs(sizeof(struct edma_adapter),
- EDMA_NETDEV_TX_QUEUE, EDMA_NETDEV_RX_QUEUE);
-
- if (!edma_netdev[i]) {
- dev_err(&pdev->dev,
- "net device alloc fails for index=%d\n", i);
- err = -ENODEV;
- goto err_ioremap;
- }
-
- SET_NETDEV_DEV(edma_netdev[i], &pdev->dev);
- platform_set_drvdata(pdev, edma_netdev[i]);
- edma_cinfo->netdev[i] = edma_netdev[i];
- }
-
- /* Fill ring details */
- edma_cinfo->num_tx_queues = EDMA_MAX_TRANSMIT_QUEUE;
- edma_cinfo->num_txq_per_core = (EDMA_MAX_TRANSMIT_QUEUE / 4);
- edma_cinfo->tx_ring_count = EDMA_TX_RING_SIZE;
-
- /* Update num rx queues based on module parameter */
- edma_cinfo->num_rx_queues = num_rxq;
- edma_cinfo->num_rxq_per_core = ((num_rxq == 4) ? 1 : 2);
-
- edma_cinfo->rx_ring_count = EDMA_RX_RING_SIZE;
-
- hw = &edma_cinfo->hw;
-
- /* Fill HW defaults */
- hw->tx_intr_mask = EDMA_TX_IMR_NORMAL_MASK;
- hw->rx_intr_mask = EDMA_RX_IMR_NORMAL_MASK;
-
- of_property_read_u32(np, "qcom,page-mode", &edma_cinfo->page_mode);
- of_property_read_u32(np, "qcom,rx_head_buf_size",
- &hw->rx_head_buff_size);
-
- if (overwrite_mode) {
- dev_info(&pdev->dev, "page mode overwritten");
- edma_cinfo->page_mode = page_mode;
- }
-
- if (jumbo_mru)
- edma_cinfo->fraglist_mode = 1;
-
- if (edma_cinfo->page_mode)
- hw->rx_head_buff_size = EDMA_RX_HEAD_BUFF_SIZE_JUMBO;
- else if (edma_cinfo->fraglist_mode)
- hw->rx_head_buff_size = jumbo_mru;
- else if (!hw->rx_head_buff_size)
- hw->rx_head_buff_size = EDMA_RX_HEAD_BUFF_SIZE;
-
- hw->misc_intr_mask = 0;
- hw->wol_intr_mask = 0;
-
- hw->intr_clear_type = EDMA_INTR_CLEAR_TYPE;
- hw->intr_sw_idx_w = EDMA_INTR_SW_IDX_W_TYPE;
-
- /* configure RSS type to the different protocol that can be
- * supported
- */
- hw->rss_type = EDMA_RSS_TYPE_IPV4TCP | EDMA_RSS_TYPE_IPV6_TCP |
- EDMA_RSS_TYPE_IPV4_UDP | EDMA_RSS_TYPE_IPV6UDP |
- EDMA_RSS_TYPE_IPV4 | EDMA_RSS_TYPE_IPV6;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
- edma_cinfo->hw.hw_addr = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(edma_cinfo->hw.hw_addr)) {
- err = PTR_ERR(edma_cinfo->hw.hw_addr);
- goto err_ioremap;
- }
-
- edma_hw_addr = (u32)edma_cinfo->hw.hw_addr;
-
- /* Parse tx queue interrupt number from device tree */
- for (i = 0; i < edma_cinfo->num_tx_queues; i++)
- edma_cinfo->tx_irq[i] = platform_get_irq(pdev, i);
-
- /* Parse rx queue interrupt number from device tree
- * Here we are setting j to point to the point where we
- * left tx interrupt parsing(i.e 16) and run run the loop
- * from 0 to 7 to parse rx interrupt number.
- */
- for (i = 0, j = edma_cinfo->num_tx_queues, k = 0;
- i < edma_cinfo->num_rx_queues; i++) {
- edma_cinfo->rx_irq[k] = platform_get_irq(pdev, j);
- k += ((num_rxq == 4) ? 2 : 1);
- j += ((num_rxq == 4) ? 2 : 1);
- }
-
- edma_cinfo->rx_head_buffer_len = edma_cinfo->hw.rx_head_buff_size;
- edma_cinfo->rx_page_buffer_len = PAGE_SIZE;
-
- err = edma_alloc_queues_tx(edma_cinfo);
- if (err) {
- dev_err(&pdev->dev, "Allocation of TX queue failed\n");
- goto err_tx_qinit;
- }
-
- err = edma_alloc_queues_rx(edma_cinfo);
- if (err) {
- dev_err(&pdev->dev, "Allocation of RX queue failed\n");
- goto err_rx_qinit;
- }
-
- err = edma_alloc_tx_rings(edma_cinfo);
- if (err) {
- dev_err(&pdev->dev, "Allocation of TX resources failed\n");
- goto err_tx_rinit;
- }
-
- err = edma_alloc_rx_rings(edma_cinfo);
- if (err) {
- dev_err(&pdev->dev, "Allocation of RX resources failed\n");
- goto err_rx_rinit;
- }
-
- /* Initialize netdev and netdev bitmap for transmit descriptor rings */
- for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
- struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[i];
- int j;
-
- etdr->netdev_bmp = 0;
- for (j = 0; j < EDMA_MAX_NETDEV_PER_QUEUE; j++) {
- etdr->netdev[j] = NULL;
- etdr->nq[j] = NULL;
- }
- }
-
- if (of_property_read_bool(np, "qcom,mdio_supported")) {
- mdio_node = of_find_compatible_node(NULL, NULL,
- "qcom,ipq4019-mdio");
- if (!mdio_node) {
- dev_err(&pdev->dev, "cannot find mdio node by phandle");
- err = -EIO;
- goto err_mdiobus_init_fail;
- }
-
- miibus = of_mdio_find_bus(mdio_node);
- if (!miibus)
- return -EINVAL;
- }
-
- if (of_property_read_bool(np, "qcom,single-phy") &&
- edma_cinfo->num_gmac == 1) {
- err = ess_parse(edma_cinfo);
- if (!err)
- err = ess_reset(edma_cinfo);
- if (err)
- goto err_single_phy_init;
- else
- edma_cinfo->is_single_phy = true;
- }
-
- for_each_available_child_of_node(np, pnp) {
- /* this check is needed if parent and daughter dts have
- * different number of gmac nodes
- */
- if (idx_mac == edma_cinfo->num_gmac) {
- of_node_put(np);
- break;
- }
-
- of_get_mac_address(pnp, edma_netdev[idx_mac]->dev_addr);
-
- idx_mac++;
- }
-
- /* Populate the adapter structure register the netdevice */
- for (i = 0; i < edma_cinfo->num_gmac; i++) {
- int k, m;
-
- adapter[i] = netdev_priv(edma_netdev[i]);
- adapter[i]->netdev = edma_netdev[i];
- adapter[i]->pdev = pdev;
- for (j = 0; j < CONFIG_NR_CPUS; j++) {
- m = i % 2;
- adapter[i]->tx_start_offset[j] =
- ((j << EDMA_TX_CPU_START_SHIFT) + (m << 1));
- /* Share the queues with available net-devices.
- * For instance , with 5 net-devices
- * eth0/eth2/eth4 will share q0,q1,q4,q5,q8,q9,q12,q13
- * and eth1/eth3 will get the remaining.
- */
- for (k = adapter[i]->tx_start_offset[j]; k <
- (adapter[i]->tx_start_offset[j] + 2); k++) {
- if (edma_fill_netdev(edma_cinfo, k, i, j)) {
- pr_err("Netdev overflow Error\n");
- goto err_register;
- }
- }
- }
-
- adapter[i]->edma_cinfo = edma_cinfo;
- edma_netdev[i]->netdev_ops = &edma_axi_netdev_ops;
- edma_netdev[i]->max_mtu = 9000;
- edma_netdev[i]->features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM
- | NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_SG |
- NETIF_F_TSO | NETIF_F_GRO | NETIF_F_HW_VLAN_CTAG_TX;
- edma_netdev[i]->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM |
- NETIF_F_HW_VLAN_CTAG_RX
- | NETIF_F_SG | NETIF_F_TSO | NETIF_F_GRO;
- edma_netdev[i]->vlan_features = NETIF_F_HW_CSUM | NETIF_F_SG |
- NETIF_F_TSO | NETIF_F_GRO;
- edma_netdev[i]->wanted_features = NETIF_F_HW_CSUM | NETIF_F_SG |
- NETIF_F_TSO | NETIF_F_GRO;
-
-#ifdef CONFIG_RFS_ACCEL
- edma_netdev[i]->features |= NETIF_F_NTUPLE | NETIF_F_RXHASH;
- edma_netdev[i]->hw_features |= NETIF_F_NTUPLE | NETIF_F_RXHASH;
- edma_netdev[i]->vlan_features |= NETIF_F_NTUPLE | NETIF_F_RXHASH;
- edma_netdev[i]->wanted_features |= NETIF_F_NTUPLE | NETIF_F_RXHASH;
-#endif
- edma_set_ethtool_ops(edma_netdev[i]);
-
- /* This just fill in some default MAC address
- */
- if (!is_valid_ether_addr(edma_netdev[i]->dev_addr)) {
- random_ether_addr(edma_netdev[i]->dev_addr);
- pr_info("EDMA using MAC@ - using");
- pr_info("%02x:%02x:%02x:%02x:%02x:%02x\n",
- *(edma_netdev[i]->dev_addr),
- *(edma_netdev[i]->dev_addr + 1),
- *(edma_netdev[i]->dev_addr + 2),
- *(edma_netdev[i]->dev_addr + 3),
- *(edma_netdev[i]->dev_addr + 4),
- *(edma_netdev[i]->dev_addr + 5));
- }
-
- err = register_netdev(edma_netdev[i]);
- if (err)
- goto err_register;
-
- /* carrier off reporting is important to
- * ethtool even BEFORE open
- */
- netif_carrier_off(edma_netdev[i]);
-
- /* Allocate reverse irq cpu mapping structure for
- * receive queues
- */
-#ifdef CONFIG_RFS_ACCEL
- edma_netdev[i]->rx_cpu_rmap =
- alloc_irq_cpu_rmap(EDMA_NETDEV_RX_QUEUE);
- if (!edma_netdev[i]->rx_cpu_rmap) {
- err = -ENOMEM;
- goto err_rmap_alloc_fail;
- }
-#endif
- }
-
- for (i = 0; i < EDMA_MAX_PORTID_BITMAP_INDEX; i++)
- edma_cinfo->portid_netdev_lookup_tbl[i] = NULL;
-
- for_each_available_child_of_node(np, pnp) {
- const uint32_t *vlan_tag = NULL;
- int len;
-
- /* this check is needed if parent and daughter dts have
- * different number of gmac nodes
- */
- if (idx == edma_cinfo->num_gmac)
- break;
-
- /* Populate port-id to netdev lookup table */
- vlan_tag = of_get_property(pnp, "vlan_tag", &len);
- if (!vlan_tag) {
- pr_err("Vlan tag parsing Failed.\n");
- goto err_rmap_alloc_fail;
- }
-
- adapter[idx]->default_vlan_tag = of_read_number(vlan_tag, 1);
- vlan_tag++;
- portid_bmp = of_read_number(vlan_tag, 1);
- adapter[idx]->dp_bitmap = portid_bmp;
-
- portid_bmp = portid_bmp >> 1; /* We ignore CPU Port bit 0 */
- while (portid_bmp) {
- int port_bit = ffs(portid_bmp);
-
- if (port_bit > EDMA_MAX_PORTID_SUPPORTED)
- goto err_rmap_alloc_fail;
- edma_cinfo->portid_netdev_lookup_tbl[port_bit] =
- edma_netdev[idx];
- portid_bmp &= ~(1 << (port_bit - 1));
- }
-
- if (!of_property_read_u32(pnp, "qcom,poll_required",
- &adapter[idx]->poll_required)) {
- if (adapter[idx]->poll_required) {
- of_property_read_u32(pnp, "qcom,phy_mdio_addr",
- &adapter[idx]->phy_mdio_addr);
- of_property_read_u32(pnp, "qcom,forced_speed",
- &adapter[idx]->forced_speed);
- of_property_read_u32(pnp, "qcom,forced_duplex",
- &adapter[idx]->forced_duplex);
-
- /* create a phyid using MDIO bus id
- * and MDIO bus address
- */
- snprintf(adapter[idx]->phy_id,
- MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
- miibus->id,
- adapter[idx]->phy_mdio_addr);
- }
- } else {
- adapter[idx]->poll_required = 0;
- adapter[idx]->forced_speed = SPEED_1000;
- adapter[idx]->forced_duplex = DUPLEX_FULL;
- }
-
- idx++;
- }
-
- edma_cinfo->edma_ctl_table_hdr = register_net_sysctl(&init_net,
- "net/edma",
- edma_table);
- if (!edma_cinfo->edma_ctl_table_hdr) {
- dev_err(&pdev->dev, "edma sysctl table hdr not registered\n");
- goto err_unregister_sysctl_tbl;
- }
-
- /* Disable all 16 Tx and 8 rx irqs */
- edma_irq_disable(edma_cinfo);
-
- err = edma_reset(edma_cinfo);
- if (err) {
- err = -EIO;
- goto err_reset;
- }
-
- /* populate per_core_info, do a napi_Add, request 16 TX irqs,
- * 8 RX irqs, do a napi enable
- */
- for (i = 0; i < CONFIG_NR_CPUS; i++) {
- u8 rx_start;
-
- edma_cinfo->edma_percpu_info[i].napi.state = 0;
-
- netif_napi_add(edma_netdev[0],
- &edma_cinfo->edma_percpu_info[i].napi,
- edma_poll, 64);
- napi_enable(&edma_cinfo->edma_percpu_info[i].napi);
- edma_cinfo->edma_percpu_info[i].tx_mask = tx_mask[i];
- edma_cinfo->edma_percpu_info[i].rx_mask = EDMA_RX_PER_CPU_MASK
- << (i << EDMA_RX_PER_CPU_MASK_SHIFT);
- edma_cinfo->edma_percpu_info[i].tx_start = tx_start[i];
- edma_cinfo->edma_percpu_info[i].rx_start =
- i << EDMA_RX_CPU_START_SHIFT;
- rx_start = i << EDMA_RX_CPU_START_SHIFT;
- edma_cinfo->edma_percpu_info[i].tx_status = 0;
- edma_cinfo->edma_percpu_info[i].rx_status = 0;
- edma_cinfo->edma_percpu_info[i].edma_cinfo = edma_cinfo;
-
- /* Request irq per core */
- for (j = edma_cinfo->edma_percpu_info[i].tx_start;
- j < tx_start[i] + 4; j++) {
- sprintf(&edma_tx_irq[j][0], "edma_eth_tx%d", j);
- err = request_irq(edma_cinfo->tx_irq[j],
- edma_interrupt,
- 0,
- &edma_tx_irq[j][0],
- &edma_cinfo->edma_percpu_info[i]);
- if (err)
- goto err_reset;
- }
-
- for (j = edma_cinfo->edma_percpu_info[i].rx_start;
- j < (rx_start +
- ((edma_cinfo->num_rx_queues == 4) ? 1 : 2));
- j++) {
- sprintf(&edma_rx_irq[j][0], "edma_eth_rx%d", j);
- err = request_irq(edma_cinfo->rx_irq[j],
- edma_interrupt,
- 0,
- &edma_rx_irq[j][0],
- &edma_cinfo->edma_percpu_info[i]);
- if (err)
- goto err_reset;
- }
-
-#ifdef CONFIG_RFS_ACCEL
- for (j = edma_cinfo->edma_percpu_info[i].rx_start;
- j < rx_start + 2; j += 2) {
- err = irq_cpu_rmap_add(edma_netdev[0]->rx_cpu_rmap,
- edma_cinfo->rx_irq[j]);
- if (err)
- goto err_rmap_add_fail;
- }
-#endif
- }
-
- /* Used to clear interrupt status, allocate rx buffer,
- * configure edma descriptors registers
- */
- err = edma_configure(edma_cinfo);
- if (err) {
- err = -EIO;
- goto err_configure;
- }
-
- /* Configure RSS indirection table.
- * 128 hash will be configured in the following
- * pattern: hash{0,1,2,3} = {Q0,Q2,Q4,Q6} respectively
- * and so on
- */
- for (i = 0; i < EDMA_NUM_IDT; i++)
- edma_write_reg(EDMA_REG_RSS_IDT(i), EDMA_RSS_IDT_VALUE);
-
- /* Configure load balance mapping table.
- * 4 table entry will be configured according to the
- * following pattern: load_balance{0,1,2,3} = {Q0,Q1,Q3,Q4}
- * respectively.
- */
- edma_write_reg(EDMA_REG_LB_RING, EDMA_LB_REG_VALUE);
-
- /* Configure Virtual queue for Tx rings
- * User can also change this value runtime through
- * a sysctl
- */
- edma_write_reg(EDMA_REG_VQ_CTRL0, EDMA_VQ_REG_VALUE);
- edma_write_reg(EDMA_REG_VQ_CTRL1, EDMA_VQ_REG_VALUE);
-
- /* Configure Max AXI Burst write size to 128 bytes*/
- edma_write_reg(EDMA_REG_AXIW_CTRL_MAXWRSIZE,
- EDMA_AXIW_MAXWRSIZE_VALUE);
-
- /* Enable All 16 tx and 8 rx irq mask */
- edma_irq_enable(edma_cinfo);
- edma_enable_tx_ctrl(&edma_cinfo->hw);
- edma_enable_rx_ctrl(&edma_cinfo->hw);
-
- for (i = 0; i < edma_cinfo->num_gmac; i++) {
- if (adapter[i]->poll_required) {
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,5,0)
- phy_interface_t phy_mode;
-
- err = of_get_phy_mode(np, &phy_mode);
- if (err)
- phy_mode = PHY_INTERFACE_MODE_SGMII;
-#else
- int phy_mode = of_get_phy_mode(np);
- if (phy_mode < 0)
- phy_mode = PHY_INTERFACE_MODE_SGMII;
-#endif
- adapter[i]->phydev =
- phy_connect(edma_netdev[i],
- (const char *)adapter[i]->phy_id,
- &edma_adjust_link,
- phy_mode);
- if (IS_ERR(adapter[i]->phydev)) {
- dev_dbg(&pdev->dev, "PHY attach FAIL");
- err = -EIO;
- goto edma_phy_attach_fail;
- } else {
- linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
- adapter[i]->phydev->advertising);
- linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
- adapter[i]->phydev->advertising);
- linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
- adapter[i]->phydev->supported);
- linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
- adapter[i]->phydev->supported);
- }
- } else {
- adapter[i]->phydev = NULL;
- }
- }
-
- spin_lock_init(&edma_cinfo->stats_lock);
-
- timer_setup(&edma_cinfo->edma_stats_timer, edma_statistics_timer, 0);
- mod_timer(&edma_cinfo->edma_stats_timer, jiffies + 1*HZ);
-
- return 0;
-
-edma_phy_attach_fail:
- miibus = NULL;
-err_configure:
-#ifdef CONFIG_RFS_ACCEL
- for (i = 0; i < edma_cinfo->num_gmac; i++) {
- free_irq_cpu_rmap(adapter[i]->netdev->rx_cpu_rmap);
- adapter[i]->netdev->rx_cpu_rmap = NULL;
- }
-#endif
-err_rmap_add_fail:
- edma_free_irqs(adapter[0]);
- for (i = 0; i < CONFIG_NR_CPUS; i++)
- napi_disable(&edma_cinfo->edma_percpu_info[i].napi);
-err_reset:
-err_unregister_sysctl_tbl:
-err_rmap_alloc_fail:
- for (i = 0; i < edma_cinfo->num_gmac; i++)
- unregister_netdev(edma_netdev[i]);
-err_register:
-err_single_phy_init:
- iounmap(edma_cinfo->ess_hw_addr);
- clk_disable_unprepare(edma_cinfo->ess_clk);
-err_mdiobus_init_fail:
- edma_free_rx_rings(edma_cinfo);
-err_rx_rinit:
- edma_free_tx_rings(edma_cinfo);
-err_tx_rinit:
- edma_free_queues(edma_cinfo);
-err_rx_qinit:
-err_tx_qinit:
- iounmap(edma_cinfo->hw.hw_addr);
-err_ioremap:
- for (i = 0; i < edma_cinfo->num_gmac; i++) {
- if (edma_netdev[i])
- free_netdev(edma_netdev[i]);
- }
-err_cinfo:
- kfree(edma_cinfo);
-err_alloc:
- return err;
-}
-
-/* edma_axi_remove()
- * Device Removal Routine
- *
- * edma_axi_remove is called by the platform subsystem to alert the driver
- * that it should release a platform device.
- */
-static int edma_axi_remove(struct platform_device *pdev)
-{
- struct edma_adapter *adapter = netdev_priv(edma_netdev[0]);
- struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
- struct edma_hw *hw = &edma_cinfo->hw;
- int i;
-
- for (i = 0; i < edma_cinfo->num_gmac; i++)
- unregister_netdev(edma_netdev[i]);
-
- edma_stop_rx_tx(hw);
- for (i = 0; i < CONFIG_NR_CPUS; i++)
- napi_disable(&edma_cinfo->edma_percpu_info[i].napi);
-
- edma_irq_disable(edma_cinfo);
- edma_write_reg(EDMA_REG_RX_ISR, 0xff);
- edma_write_reg(EDMA_REG_TX_ISR, 0xffff);
-#ifdef CONFIG_RFS_ACCEL
- for (i = 0; i < edma_cinfo->num_gmac; i++) {
- free_irq_cpu_rmap(edma_netdev[i]->rx_cpu_rmap);
- edma_netdev[i]->rx_cpu_rmap = NULL;
- }
-#endif
-
- for (i = 0; i < edma_cinfo->num_gmac; i++) {
- struct edma_adapter *adapter = netdev_priv(edma_netdev[i]);
-
- if (adapter->phydev)
- phy_disconnect(adapter->phydev);
- }
-
- del_timer_sync(&edma_cinfo->edma_stats_timer);
- edma_free_irqs(adapter);
- unregister_net_sysctl_table(edma_cinfo->edma_ctl_table_hdr);
- iounmap(edma_cinfo->ess_hw_addr);
- clk_disable_unprepare(edma_cinfo->ess_clk);
- edma_free_tx_resources(edma_cinfo);
- edma_free_rx_resources(edma_cinfo);
- edma_free_tx_rings(edma_cinfo);
- edma_free_rx_rings(edma_cinfo);
- edma_free_queues(edma_cinfo);
- for (i = 0; i < edma_cinfo->num_gmac; i++)
- free_netdev(edma_netdev[i]);
-
- kfree(edma_cinfo);
-
- return 0;
-}
-
-static const struct of_device_id edma_of_mtable[] = {
- {.compatible = "qcom,ess-edma" },
- {}
-};
-MODULE_DEVICE_TABLE(of, edma_of_mtable);
-
-static struct platform_driver edma_axi_driver = {
- .driver = {
- .name = edma_axi_driver_name,
- .of_match_table = edma_of_mtable,
- },
- .probe = edma_axi_probe,
- .remove = edma_axi_remove,
-};
-
-module_platform_driver(edma_axi_driver);
-
-MODULE_AUTHOR("Qualcomm Atheros Inc");
-MODULE_DESCRIPTION("QCA ESS EDMA driver");
-MODULE_LICENSE("GPL");
--- a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/ess_edma.h
+++ /dev/null
@@ -1,389 +0,0 @@
-/*
- * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for
- * any purpose with or without fee is hereby granted, provided that the
- * above copyright notice and this permission notice appear in all copies.
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
- * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef _ESS_EDMA_H_
-#define _ESS_EDMA_H_
-
-#include <linux/types.h>
-
-struct edma_adapter;
-struct edma_hw;
-
-/* register definition */
-#define EDMA_REG_MAS_CTRL 0x0
-#define EDMA_REG_TIMEOUT_CTRL 0x004
-#define EDMA_REG_DBG0 0x008
-#define EDMA_REG_DBG1 0x00C
-#define EDMA_REG_SW_CTRL0 0x100
-#define EDMA_REG_SW_CTRL1 0x104
-
-/* Interrupt Status Register */
-#define EDMA_REG_RX_ISR 0x200
-#define EDMA_REG_TX_ISR 0x208
-#define EDMA_REG_MISC_ISR 0x210
-#define EDMA_REG_WOL_ISR 0x218
-
-#define EDMA_MISC_ISR_RX_URG_Q(x) (1 << x)
-
-#define EDMA_MISC_ISR_AXIR_TIMEOUT 0x00000100
-#define EDMA_MISC_ISR_AXIR_ERR 0x00000200
-#define EDMA_MISC_ISR_TXF_DEAD 0x00000400
-#define EDMA_MISC_ISR_AXIW_ERR 0x00000800
-#define EDMA_MISC_ISR_AXIW_TIMEOUT 0x00001000
-
-#define EDMA_WOL_ISR 0x00000001
-
-/* Interrupt Mask Register */
-#define EDMA_REG_MISC_IMR 0x214
-#define EDMA_REG_WOL_IMR 0x218
-
-#define EDMA_RX_IMR_NORMAL_MASK 0x1
-#define EDMA_TX_IMR_NORMAL_MASK 0x1
-#define EDMA_MISC_IMR_NORMAL_MASK 0x80001FFF
-#define EDMA_WOL_IMR_NORMAL_MASK 0x1
-
-/* Edma receive consumer index */
-#define EDMA_REG_RX_SW_CONS_IDX_Q(x) (0x220 + ((x) << 2)) /* x is the queue id */
-/* Edma transmit consumer index */
-#define EDMA_REG_TX_SW_CONS_IDX_Q(x) (0x240 + ((x) << 2)) /* x is the queue id */
-
-/* IRQ Moderator Initial Timer Register */
-#define EDMA_REG_IRQ_MODRT_TIMER_INIT 0x280
-#define EDMA_IRQ_MODRT_TIMER_MASK 0xFFFF
-#define EDMA_IRQ_MODRT_RX_TIMER_SHIFT 0
-#define EDMA_IRQ_MODRT_TX_TIMER_SHIFT 16
-
-/* Interrupt Control Register */
-#define EDMA_REG_INTR_CTRL 0x284
-#define EDMA_INTR_CLR_TYP_SHIFT 0
-#define EDMA_INTR_SW_IDX_W_TYP_SHIFT 1
-#define EDMA_INTR_CLEAR_TYPE_W1 0
-#define EDMA_INTR_CLEAR_TYPE_R 1
-
-/* RX Interrupt Mask Register */
-#define EDMA_REG_RX_INT_MASK_Q(x) (0x300 + ((x) << 2)) /* x = queue id */
-
-/* TX Interrupt mask register */
-#define EDMA_REG_TX_INT_MASK_Q(x) (0x340 + ((x) << 2)) /* x = queue id */
-
-/* Load Ptr Register
- * Software sets this bit after the initialization of the head and tail
- */
-#define EDMA_REG_TX_SRAM_PART 0x400
-#define EDMA_LOAD_PTR_SHIFT 16
-
-/* TXQ Control Register */
-#define EDMA_REG_TXQ_CTRL 0x404
-#define EDMA_TXQ_CTRL_IP_OPTION_EN 0x10
-#define EDMA_TXQ_CTRL_TXQ_EN 0x20
-#define EDMA_TXQ_CTRL_ENH_MODE 0x40
-#define EDMA_TXQ_CTRL_LS_8023_EN 0x80
-#define EDMA_TXQ_CTRL_TPD_BURST_EN 0x100
-#define EDMA_TXQ_CTRL_LSO_BREAK_EN 0x200
-#define EDMA_TXQ_NUM_TPD_BURST_MASK 0xF
-#define EDMA_TXQ_TXF_BURST_NUM_MASK 0xFFFF
-#define EDMA_TXQ_NUM_TPD_BURST_SHIFT 0
-#define EDMA_TXQ_TXF_BURST_NUM_SHIFT 16
-
-#define EDMA_REG_TXF_WATER_MARK 0x408 /* In 8-bytes */
-#define EDMA_TXF_WATER_MARK_MASK 0x0FFF
-#define EDMA_TXF_LOW_WATER_MARK_SHIFT 0
-#define EDMA_TXF_HIGH_WATER_MARK_SHIFT 16
-#define EDMA_TXQ_CTRL_BURST_MODE_EN 0x80000000
-
-/* WRR Control Register */
-#define EDMA_REG_WRR_CTRL_Q0_Q3 0x40c
-#define EDMA_REG_WRR_CTRL_Q4_Q7 0x410
-#define EDMA_REG_WRR_CTRL_Q8_Q11 0x414
-#define EDMA_REG_WRR_CTRL_Q12_Q15 0x418
-
-/* Weight round robin(WRR), it takes queue as input, and computes
- * starting bits where we need to write the weight for a particular
- * queue
- */
-#define EDMA_WRR_SHIFT(x) (((x) * 5) % 20)
-
-/* Tx Descriptor Control Register */
-#define EDMA_REG_TPD_RING_SIZE 0x41C
-#define EDMA_TPD_RING_SIZE_SHIFT 0
-#define EDMA_TPD_RING_SIZE_MASK 0xFFFF
-
-/* Transmit descriptor base address */
-#define EDMA_REG_TPD_BASE_ADDR_Q(x) (0x420 + ((x) << 2)) /* x = queue id */
-
-/* TPD Index Register */
-#define EDMA_REG_TPD_IDX_Q(x) (0x460 + ((x) << 2)) /* x = queue id */
-
-#define EDMA_TPD_PROD_IDX_BITS 0x0000FFFF
-#define EDMA_TPD_CONS_IDX_BITS 0xFFFF0000
-#define EDMA_TPD_PROD_IDX_MASK 0xFFFF
-#define EDMA_TPD_CONS_IDX_MASK 0xFFFF
-#define EDMA_TPD_PROD_IDX_SHIFT 0
-#define EDMA_TPD_CONS_IDX_SHIFT 16
-
-/* TX Virtual Queue Mapping Control Register */
-#define EDMA_REG_VQ_CTRL0 0x4A0
-#define EDMA_REG_VQ_CTRL1 0x4A4
-
-/* Virtual QID shift, it takes queue as input, and computes
- * Virtual QID position in virtual qid control register
- */
-#define EDMA_VQ_ID_SHIFT(i) (((i) * 3) % 24)
-
-/* Virtual Queue Default Value */
-#define EDMA_VQ_REG_VALUE 0x240240
-
-/* Tx side Port Interface Control Register */
-#define EDMA_REG_PORT_CTRL 0x4A8
-#define EDMA_PAD_EN_SHIFT 15
-
-/* Tx side VLAN Configuration Register */
-#define EDMA_REG_VLAN_CFG 0x4AC
-
-#define EDMA_TX_CVLAN 16
-#define EDMA_TX_INS_CVLAN 17
-#define EDMA_TX_CVLAN_TAG_SHIFT 0
-
-#define EDMA_TX_SVLAN 14
-#define EDMA_TX_INS_SVLAN 15
-#define EDMA_TX_SVLAN_TAG_SHIFT 16
-
-/* Tx Queue Packet Statistic Register */
-#define EDMA_REG_TX_STAT_PKT_Q(x) (0x700 + ((x) << 3)) /* x = queue id */
-
-#define EDMA_TX_STAT_PKT_MASK 0xFFFFFF
-
-/* Tx Queue Byte Statistic Register */
-#define EDMA_REG_TX_STAT_BYTE_Q(x) (0x704 + ((x) << 3)) /* x = queue id */
-
-/* Load Balance Based Ring Offset Register */
-#define EDMA_REG_LB_RING 0x800
-#define EDMA_LB_RING_ENTRY_MASK 0xff
-#define EDMA_LB_RING_ID_MASK 0x7
-#define EDMA_LB_RING_PROFILE_ID_MASK 0x3
-#define EDMA_LB_RING_ENTRY_BIT_OFFSET 8
-#define EDMA_LB_RING_ID_OFFSET 0
-#define EDMA_LB_RING_PROFILE_ID_OFFSET 3
-#define EDMA_LB_REG_VALUE 0x6040200
-
-/* Load Balance Priority Mapping Register */
-#define EDMA_REG_LB_PRI_START 0x804
-#define EDMA_REG_LB_PRI_END 0x810
-#define EDMA_LB_PRI_REG_INC 4
-#define EDMA_LB_PRI_ENTRY_BIT_OFFSET 4
-#define EDMA_LB_PRI_ENTRY_MASK 0xf
-
-/* RSS Priority Mapping Register */
-#define EDMA_REG_RSS_PRI 0x820
-#define EDMA_RSS_PRI_ENTRY_MASK 0xf
-#define EDMA_RSS_RING_ID_MASK 0x7
-#define EDMA_RSS_PRI_ENTRY_BIT_OFFSET 4
-
-/* RSS Indirection Register */
-#define EDMA_REG_RSS_IDT(x) (0x840 + ((x) << 2)) /* x = No. of indirection table */
-#define EDMA_NUM_IDT 16
-#define EDMA_RSS_IDT_VALUE 0x64206420
-
-/* Default RSS Ring Register */
-#define EDMA_REG_DEF_RSS 0x890
-#define EDMA_DEF_RSS_MASK 0x7
-
-/* RSS Hash Function Type Register */
-#define EDMA_REG_RSS_TYPE 0x894
-#define EDMA_RSS_TYPE_NONE 0x01
-#define EDMA_RSS_TYPE_IPV4TCP 0x02
-#define EDMA_RSS_TYPE_IPV6_TCP 0x04
-#define EDMA_RSS_TYPE_IPV4_UDP 0x08
-#define EDMA_RSS_TYPE_IPV6UDP 0x10
-#define EDMA_RSS_TYPE_IPV4 0x20
-#define EDMA_RSS_TYPE_IPV6 0x40
-#define EDMA_RSS_HASH_MODE_MASK 0x7f
-
-#define EDMA_REG_RSS_HASH_VALUE 0x8C0
-
-#define EDMA_REG_RSS_TYPE_RESULT 0x8C4
-
-#define EDMA_HASH_TYPE_START 0
-#define EDMA_HASH_TYPE_END 5
-#define EDMA_HASH_TYPE_SHIFT 12
-
-#define EDMA_RFS_FLOW_ENTRIES 1024
-#define EDMA_RFS_FLOW_ENTRIES_MASK (EDMA_RFS_FLOW_ENTRIES - 1)
-#define EDMA_RFS_EXPIRE_COUNT_PER_CALL 128
-
-/* RFD Base Address Register */
-#define EDMA_REG_RFD_BASE_ADDR_Q(x) (0x950 + ((x) << 2)) /* x = queue id */
-
-/* RFD Index Register */
-#define EDMA_REG_RFD_IDX_Q(x) (0x9B0 + ((x) << 2))
-
-#define EDMA_RFD_PROD_IDX_BITS 0x00000FFF
-#define EDMA_RFD_CONS_IDX_BITS 0x0FFF0000
-#define EDMA_RFD_PROD_IDX_MASK 0xFFF
-#define EDMA_RFD_CONS_IDX_MASK 0xFFF
-#define EDMA_RFD_PROD_IDX_SHIFT 0
-#define EDMA_RFD_CONS_IDX_SHIFT 16
-
-/* Rx Descriptor Control Register */
-#define EDMA_REG_RX_DESC0 0xA10
-#define EDMA_RFD_RING_SIZE_MASK 0xFFF
-#define EDMA_RX_BUF_SIZE_MASK 0xFFFF
-#define EDMA_RFD_RING_SIZE_SHIFT 0
-#define EDMA_RX_BUF_SIZE_SHIFT 16
-
-#define EDMA_REG_RX_DESC1 0xA14
-#define EDMA_RXQ_RFD_BURST_NUM_MASK 0x3F
-#define EDMA_RXQ_RFD_PF_THRESH_MASK 0x1F
-#define EDMA_RXQ_RFD_LOW_THRESH_MASK 0xFFF
-#define EDMA_RXQ_RFD_BURST_NUM_SHIFT 0
-#define EDMA_RXQ_RFD_PF_THRESH_SHIFT 8
-#define EDMA_RXQ_RFD_LOW_THRESH_SHIFT 16
-
-/* RXQ Control Register */
-#define EDMA_REG_RXQ_CTRL 0xA18
-#define EDMA_FIFO_THRESH_TYPE_SHIF 0
-#define EDMA_FIFO_THRESH_128_BYTE 0x0
-#define EDMA_FIFO_THRESH_64_BYTE 0x1
-#define EDMA_RXQ_CTRL_RMV_VLAN 0x00000002
-#define EDMA_RXQ_CTRL_EN 0x0000FF00
-
-/* AXI Burst Size Config */
-#define EDMA_REG_AXIW_CTRL_MAXWRSIZE 0xA1C
-#define EDMA_AXIW_MAXWRSIZE_VALUE 0x0
-
-/* Rx Statistics Register */
-#define EDMA_REG_RX_STAT_BYTE_Q(x) (0xA30 + ((x) << 2)) /* x = queue id */
-#define EDMA_REG_RX_STAT_PKT_Q(x) (0xA50 + ((x) << 2)) /* x = queue id */
-
-/* WoL Pattern Length Register */
-#define EDMA_REG_WOL_PATTERN_LEN0 0xC00
-#define EDMA_WOL_PT_LEN_MASK 0xFF
-#define EDMA_WOL_PT0_LEN_SHIFT 0
-#define EDMA_WOL_PT1_LEN_SHIFT 8
-#define EDMA_WOL_PT2_LEN_SHIFT 16
-#define EDMA_WOL_PT3_LEN_SHIFT 24
-
-#define EDMA_REG_WOL_PATTERN_LEN1 0xC04
-#define EDMA_WOL_PT4_LEN_SHIFT 0
-#define EDMA_WOL_PT5_LEN_SHIFT 8
-#define EDMA_WOL_PT6_LEN_SHIFT 16
-
-/* WoL Control Register */
-#define EDMA_REG_WOL_CTRL 0xC08
-#define EDMA_WOL_WK_EN 0x00000001
-#define EDMA_WOL_MG_EN 0x00000002
-#define EDMA_WOL_PT0_EN 0x00000004
-#define EDMA_WOL_PT1_EN 0x00000008
-#define EDMA_WOL_PT2_EN 0x00000010
-#define EDMA_WOL_PT3_EN 0x00000020
-#define EDMA_WOL_PT4_EN 0x00000040
-#define EDMA_WOL_PT5_EN 0x00000080
-#define EDMA_WOL_PT6_EN 0x00000100
-
-/* MAC Control Register */
-#define EDMA_REG_MAC_CTRL0 0xC20
-#define EDMA_REG_MAC_CTRL1 0xC24
-
-/* WoL Pattern Register */
-#define EDMA_REG_WOL_PATTERN_START 0x5000
-#define EDMA_PATTERN_PART_REG_OFFSET 0x40
-
-
-/* TX descriptor fields */
-#define EDMA_TPD_HDR_SHIFT 0
-#define EDMA_TPD_PPPOE_EN 0x00000100
-#define EDMA_TPD_IP_CSUM_EN 0x00000200
-#define EDMA_TPD_TCP_CSUM_EN 0x0000400
-#define EDMA_TPD_UDP_CSUM_EN 0x00000800
-#define EDMA_TPD_CUSTOM_CSUM_EN 0x00000C00
-#define EDMA_TPD_LSO_EN 0x00001000
-#define EDMA_TPD_LSO_V2_EN 0x00002000
-#define EDMA_TPD_IPV4_EN 0x00010000
-#define EDMA_TPD_MSS_MASK 0x1FFF
-#define EDMA_TPD_MSS_SHIFT 18
-#define EDMA_TPD_CUSTOM_CSUM_SHIFT 18
-
-/* RRD descriptor fields */
-#define EDMA_RRD_NUM_RFD_MASK 0x000F
-#define EDMA_RRD_SVLAN 0x8000
-#define EDMA_RRD_FLOW_COOKIE_MASK 0x07FF;
-
-#define EDMA_RRD_PKT_SIZE_MASK 0x3FFF
-#define EDMA_RRD_CSUM_FAIL_MASK 0xC000
-#define EDMA_RRD_CVLAN 0x0001
-#define EDMA_RRD_DESC_VALID 0x8000
-
-#define EDMA_RRD_PRIORITY_SHIFT 4
-#define EDMA_RRD_PRIORITY_MASK 0x7
-#define EDMA_RRD_PORT_TYPE_SHIFT 7
-#define EDMA_RRD_PORT_TYPE_MASK 0x1F
-
-#define ESS_RGMII_CTRL 0x0004
-
-/* Port status registers */
-#define ESS_PORT0_STATUS 0x007C
-#define ESS_PORT1_STATUS 0x0080
-#define ESS_PORT2_STATUS 0x0084
-#define ESS_PORT3_STATUS 0x0088
-#define ESS_PORT4_STATUS 0x008C
-#define ESS_PORT5_STATUS 0x0090
-
-#define ESS_PORT_STATUS_HDX_FLOW_CTL 0x80
-#define ESS_PORT_STATUS_DUPLEX_MODE 0x40
-#define ESS_PORT_STATUS_RX_FLOW_EN 0x20
-#define ESS_PORT_STATUS_TX_FLOW_EN 0x10
-#define ESS_PORT_STATUS_RX_MAC_EN 0x08
-#define ESS_PORT_STATUS_TX_MAC_EN 0x04
-#define ESS_PORT_STATUS_SPEED_INV 0x03
-#define ESS_PORT_STATUS_SPEED_1000 0x02
-#define ESS_PORT_STATUS_SPEED_100 0x01
-#define ESS_PORT_STATUS_SPEED_10 0x00
-
-#define ESS_PORT_1G_FDX (ESS_PORT_STATUS_DUPLEX_MODE | ESS_PORT_STATUS_RX_FLOW_EN | \
- ESS_PORT_STATUS_TX_FLOW_EN | ESS_PORT_STATUS_RX_MAC_EN | \
- ESS_PORT_STATUS_TX_MAC_EN | ESS_PORT_STATUS_SPEED_1000)
-
-#define PHY_STATUS_REG 0x11
-#define PHY_STATUS_SPEED 0xC000
-#define PHY_STATUS_SPEED_SHIFT 14
-#define PHY_STATUS_DUPLEX 0x2000
-#define PHY_STATUS_DUPLEX_SHIFT 13
-#define PHY_STATUS_SPEED_DUPLEX_RESOLVED 0x0800
-#define PHY_STATUS_CARRIER 0x0400
-#define PHY_STATUS_CARRIER_SHIFT 10
-
-/* Port lookup control registers */
-#define ESS_PORT0_LOOKUP_CTRL 0x0660
-#define ESS_PORT1_LOOKUP_CTRL 0x066C
-#define ESS_PORT2_LOOKUP_CTRL 0x0678
-#define ESS_PORT3_LOOKUP_CTRL 0x0684
-#define ESS_PORT4_LOOKUP_CTRL 0x0690
-#define ESS_PORT5_LOOKUP_CTRL 0x069C
-
-#define ESS_PORT0_HEADER_CTRL 0x009C
-
-#define ESS_PORTS_ALL 0x3f
-
-#define ESS_FWD_CTRL1 0x0624
-#define ESS_FWD_CTRL1_UC_FLOOD BITS(0, 7)
-#define ESS_FWD_CTRL1_UC_FLOOD_S 0
-#define ESS_FWD_CTRL1_MC_FLOOD BITS(8, 7)
-#define ESS_FWD_CTRL1_MC_FLOOD_S 8
-#define ESS_FWD_CTRL1_BC_FLOOD BITS(16, 7)
-#define ESS_FWD_CTRL1_BC_FLOOD_S 16
-#define ESS_FWD_CTRL1_IGMP BITS(24, 7)
-#define ESS_FWD_CTRL1_IGMP_S 24
-
-#endif /* _ESS_EDMA_H_ */
--- a/target/linux/ipq40xx/files-5.10/drivers/net/mdio/ar40xx.c
+++ /dev/null
@@ -1,1893 +0,0 @@
-/*
- * Copyright (c) 2016, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for
- * any purpose with or without fee is hereby granted, provided that the
- * above copyright notice and this permission notice appear in all copies.
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
- * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <linux/bitfield.h>
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/bitops.h>
-#include <linux/switch.h>
-#include <linux/delay.h>
-#include <linux/phy.h>
-#include <linux/clk.h>
-#include <linux/reset.h>
-#include <linux/lockdep.h>
-#include <linux/workqueue.h>
-#include <linux/of_device.h>
-#include <linux/of_address.h>
-#include <linux/of_mdio.h>
-#include <linux/mdio.h>
-#include <linux/gpio.h>
-
-#include "ar40xx.h"
-
-static struct ar40xx_priv *ar40xx_priv;
-
-#define MIB_DESC(_s , _o, _n) \
- { \
- .size = (_s), \
- .offset = (_o), \
- .name = (_n), \
- }
-
-static const struct ar40xx_mib_desc ar40xx_mibs[] = {
- MIB_DESC(1, AR40XX_STATS_RXBROAD, "RxBroad"),
- MIB_DESC(1, AR40XX_STATS_RXPAUSE, "RxPause"),
- MIB_DESC(1, AR40XX_STATS_RXMULTI, "RxMulti"),
- MIB_DESC(1, AR40XX_STATS_RXFCSERR, "RxFcsErr"),
- MIB_DESC(1, AR40XX_STATS_RXALIGNERR, "RxAlignErr"),
- MIB_DESC(1, AR40XX_STATS_RXRUNT, "RxRunt"),
- MIB_DESC(1, AR40XX_STATS_RXFRAGMENT, "RxFragment"),
- MIB_DESC(1, AR40XX_STATS_RX64BYTE, "Rx64Byte"),
- MIB_DESC(1, AR40XX_STATS_RX128BYTE, "Rx128Byte"),
- MIB_DESC(1, AR40XX_STATS_RX256BYTE, "Rx256Byte"),
- MIB_DESC(1, AR40XX_STATS_RX512BYTE, "Rx512Byte"),
- MIB_DESC(1, AR40XX_STATS_RX1024BYTE, "Rx1024Byte"),
- MIB_DESC(1, AR40XX_STATS_RX1518BYTE, "Rx1518Byte"),
- MIB_DESC(1, AR40XX_STATS_RXMAXBYTE, "RxMaxByte"),
- MIB_DESC(1, AR40XX_STATS_RXTOOLONG, "RxTooLong"),
- MIB_DESC(2, AR40XX_STATS_RXGOODBYTE, "RxGoodByte"),
- MIB_DESC(2, AR40XX_STATS_RXBADBYTE, "RxBadByte"),
- MIB_DESC(1, AR40XX_STATS_RXOVERFLOW, "RxOverFlow"),
- MIB_DESC(1, AR40XX_STATS_FILTERED, "Filtered"),
- MIB_DESC(1, AR40XX_STATS_TXBROAD, "TxBroad"),
- MIB_DESC(1, AR40XX_STATS_TXPAUSE, "TxPause"),
- MIB_DESC(1, AR40XX_STATS_TXMULTI, "TxMulti"),
- MIB_DESC(1, AR40XX_STATS_TXUNDERRUN, "TxUnderRun"),
- MIB_DESC(1, AR40XX_STATS_TX64BYTE, "Tx64Byte"),
- MIB_DESC(1, AR40XX_STATS_TX128BYTE, "Tx128Byte"),
- MIB_DESC(1, AR40XX_STATS_TX256BYTE, "Tx256Byte"),
- MIB_DESC(1, AR40XX_STATS_TX512BYTE, "Tx512Byte"),
- MIB_DESC(1, AR40XX_STATS_TX1024BYTE, "Tx1024Byte"),
- MIB_DESC(1, AR40XX_STATS_TX1518BYTE, "Tx1518Byte"),
- MIB_DESC(1, AR40XX_STATS_TXMAXBYTE, "TxMaxByte"),
- MIB_DESC(1, AR40XX_STATS_TXOVERSIZE, "TxOverSize"),
- MIB_DESC(2, AR40XX_STATS_TXBYTE, "TxByte"),
- MIB_DESC(1, AR40XX_STATS_TXCOLLISION, "TxCollision"),
- MIB_DESC(1, AR40XX_STATS_TXABORTCOL, "TxAbortCol"),
- MIB_DESC(1, AR40XX_STATS_TXMULTICOL, "TxMultiCol"),
- MIB_DESC(1, AR40XX_STATS_TXSINGLECOL, "TxSingleCol"),
- MIB_DESC(1, AR40XX_STATS_TXEXCDEFER, "TxExcDefer"),
- MIB_DESC(1, AR40XX_STATS_TXDEFER, "TxDefer"),
- MIB_DESC(1, AR40XX_STATS_TXLATECOL, "TxLateCol"),
-};
-
-static u32
-ar40xx_read(struct ar40xx_priv *priv, int reg)
-{
- return readl(priv->hw_addr + reg);
-}
-
-static u32
-ar40xx_psgmii_read(struct ar40xx_priv *priv, int reg)
-{
- return readl(priv->psgmii_hw_addr + reg);
-}
-
-static void
-ar40xx_write(struct ar40xx_priv *priv, int reg, u32 val)
-{
- writel(val, priv->hw_addr + reg);
-}
-
-static u32
-ar40xx_rmw(struct ar40xx_priv *priv, int reg, u32 mask, u32 val)
-{
- u32 ret;
-
- ret = ar40xx_read(priv, reg);
- ret &= ~mask;
- ret |= val;
- ar40xx_write(priv, reg, ret);
- return ret;
-}
-
-static void
-ar40xx_psgmii_write(struct ar40xx_priv *priv, int reg, u32 val)
-{
- writel(val, priv->psgmii_hw_addr + reg);
-}
-
-static void
-ar40xx_phy_dbg_write(struct ar40xx_priv *priv, int phy_addr,
- u16 dbg_addr, u16 dbg_data)
-{
- struct mii_bus *bus = priv->mii_bus;
-
- mutex_lock(&bus->mdio_lock);
- bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_ADDR, dbg_addr);
- bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_DATA, dbg_data);
- mutex_unlock(&bus->mdio_lock);
-}
-
-static void
-ar40xx_phy_dbg_read(struct ar40xx_priv *priv, int phy_addr,
- u16 dbg_addr, u16 *dbg_data)
-{
- struct mii_bus *bus = priv->mii_bus;
-
- mutex_lock(&bus->mdio_lock);
- bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_ADDR, dbg_addr);
- *dbg_data = bus->read(bus, phy_addr, AR40XX_MII_ATH_DBG_DATA);
- mutex_unlock(&bus->mdio_lock);
-}
-
-static void
-ar40xx_phy_mmd_write(struct ar40xx_priv *priv, u32 phy_id,
- u16 mmd_num, u16 reg_id, u16 reg_val)
-{
- struct mii_bus *bus = priv->mii_bus;
-
- mutex_lock(&bus->mdio_lock);
- bus->write(bus, phy_id,
- AR40XX_MII_ATH_MMD_ADDR, mmd_num);
- bus->write(bus, phy_id,
- AR40XX_MII_ATH_MMD_DATA, reg_id);
- bus->write(bus, phy_id,
- AR40XX_MII_ATH_MMD_ADDR,
- 0x4000 | mmd_num);
- bus->write(bus, phy_id,
- AR40XX_MII_ATH_MMD_DATA, reg_val);
- mutex_unlock(&bus->mdio_lock);
-}
-
-static u16
-ar40xx_phy_mmd_read(struct ar40xx_priv *priv, u32 phy_id,
- u16 mmd_num, u16 reg_id)
-{
- u16 value;
- struct mii_bus *bus = priv->mii_bus;
-
- mutex_lock(&bus->mdio_lock);
- bus->write(bus, phy_id,
- AR40XX_MII_ATH_MMD_ADDR, mmd_num);
- bus->write(bus, phy_id,
- AR40XX_MII_ATH_MMD_DATA, reg_id);
- bus->write(bus, phy_id,
- AR40XX_MII_ATH_MMD_ADDR,
- 0x4000 | mmd_num);
- value = bus->read(bus, phy_id, AR40XX_MII_ATH_MMD_DATA);
- mutex_unlock(&bus->mdio_lock);
- return value;
-}
-
-/* Start of swconfig support */
-
-static void
-ar40xx_phy_poll_reset(struct ar40xx_priv *priv)
-{
- u32 i, in_reset, retries = 500;
- struct mii_bus *bus = priv->mii_bus;
-
- /* Assume RESET was recently issued to some or all of the phys */
- in_reset = GENMASK(AR40XX_NUM_PHYS - 1, 0);
-
- while (retries--) {
- /* 1ms should be plenty of time.
- * 802.3 spec allows for a max wait time of 500ms
- */
- usleep_range(1000, 2000);
-
- for (i = 0; i < AR40XX_NUM_PHYS; i++) {
- int val;
-
- /* skip devices which have completed reset */
- if (!(in_reset & BIT(i)))
- continue;
-
- val = mdiobus_read(bus, i, MII_BMCR);
- if (val < 0)
- continue;
-
- /* mark when phy is no longer in reset state */
- if (!(val & BMCR_RESET))
- in_reset &= ~BIT(i);
- }
-
- if (!in_reset)
- return;
- }
-
- dev_warn(&bus->dev, "Failed to reset all phys! (in_reset: 0x%x)\n",
- in_reset);
-}
-
-static void
-ar40xx_phy_init(struct ar40xx_priv *priv)
-{
- int i;
- struct mii_bus *bus;
- u16 val;
-
- bus = priv->mii_bus;
- for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) {
- ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_0, &val);
- val &= ~AR40XX_PHY_MANU_CTRL_EN;
- ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_0, val);
- mdiobus_write(bus, i,
- MII_ADVERTISE, ADVERTISE_ALL |
- ADVERTISE_PAUSE_CAP |
- ADVERTISE_PAUSE_ASYM);
- mdiobus_write(bus, i, MII_CTRL1000, ADVERTISE_1000FULL);
- mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
- }
-
- ar40xx_phy_poll_reset(priv);
-}
-
-static void
-ar40xx_port_phy_linkdown(struct ar40xx_priv *priv)
-{
- struct mii_bus *bus;
- int i;
- u16 val;
-
- bus = priv->mii_bus;
- for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) {
- mdiobus_write(bus, i, MII_CTRL1000, 0);
- mdiobus_write(bus, i, MII_ADVERTISE, 0);
- mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
- ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_0, &val);
- val |= AR40XX_PHY_MANU_CTRL_EN;
- ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_0, val);
- /* disable transmit */
- ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_2, &val);
- val &= 0xf00f;
- ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_2, val);
- }
-}
-
-static void
-ar40xx_set_mirror_regs(struct ar40xx_priv *priv)
-{
- int port;
-
- /* reset all mirror registers */
- ar40xx_rmw(priv, AR40XX_REG_FWD_CTRL0,
- AR40XX_FWD_CTRL0_MIRROR_PORT,
- (0xF << AR40XX_FWD_CTRL0_MIRROR_PORT_S));
- for (port = 0; port < AR40XX_NUM_PORTS; port++) {
- ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(port),
- AR40XX_PORT_LOOKUP_ING_MIRROR_EN, 0);
-
- ar40xx_rmw(priv, AR40XX_REG_PORT_HOL_CTRL1(port),
- AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN, 0);
- }
-
- /* now enable mirroring if necessary */
- if (priv->source_port >= AR40XX_NUM_PORTS ||
- priv->monitor_port >= AR40XX_NUM_PORTS ||
- priv->source_port == priv->monitor_port) {
- return;
- }
-
- ar40xx_rmw(priv, AR40XX_REG_FWD_CTRL0,
- AR40XX_FWD_CTRL0_MIRROR_PORT,
- (priv->monitor_port << AR40XX_FWD_CTRL0_MIRROR_PORT_S));
-
- if (priv->mirror_rx)
- ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(priv->source_port), 0,
- AR40XX_PORT_LOOKUP_ING_MIRROR_EN);
-
- if (priv->mirror_tx)
- ar40xx_rmw(priv, AR40XX_REG_PORT_HOL_CTRL1(priv->source_port),
- 0, AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN);
-}
-
-static int
-ar40xx_sw_get_ports(struct switch_dev *dev, struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
- u8 ports = priv->vlan_table[val->port_vlan];
- int i;
-
- val->len = 0;
- for (i = 0; i < dev->ports; i++) {
- struct switch_port *p;
-
- if (!(ports & BIT(i)))
- continue;
-
- p = &val->value.ports[val->len++];
- p->id = i;
- if ((priv->vlan_tagged & BIT(i)) ||
- (priv->pvid[i] != val->port_vlan))
- p->flags = BIT(SWITCH_PORT_FLAG_TAGGED);
- else
- p->flags = 0;
- }
- return 0;
-}
-
-static int
-ar40xx_sw_set_ports(struct switch_dev *dev, struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
- u8 *vt = &priv->vlan_table[val->port_vlan];
- int i;
-
- *vt = 0;
- for (i = 0; i < val->len; i++) {
- struct switch_port *p = &val->value.ports[i];
-
- if (p->flags & BIT(SWITCH_PORT_FLAG_TAGGED)) {
- if (val->port_vlan == priv->pvid[p->id])
- priv->vlan_tagged |= BIT(p->id);
- } else {
- priv->vlan_tagged &= ~BIT(p->id);
- priv->pvid[p->id] = val->port_vlan;
- }
-
- *vt |= BIT(p->id);
- }
- return 0;
-}
-
-static int
-ar40xx_reg_wait(struct ar40xx_priv *priv, u32 reg, u32 mask, u32 val,
- unsigned timeout)
-{
- int i;
-
- for (i = 0; i < timeout; i++) {
- u32 t;
-
- t = ar40xx_read(priv, reg);
- if ((t & mask) == val)
- return 0;
-
- usleep_range(1000, 2000);
- }
-
- return -ETIMEDOUT;
-}
-
-static int
-ar40xx_mib_op(struct ar40xx_priv *priv, u32 op)
-{
- int ret;
-
- lockdep_assert_held(&priv->mib_lock);
-
- /* Capture the hardware statistics for all ports */
- ar40xx_rmw(priv, AR40XX_REG_MIB_FUNC,
- AR40XX_MIB_FUNC, (op << AR40XX_MIB_FUNC_S));
-
- /* Wait for the capturing to complete. */
- ret = ar40xx_reg_wait(priv, AR40XX_REG_MIB_FUNC,
- AR40XX_MIB_BUSY, 0, 10);
-
- return ret;
-}
-
-static void
-ar40xx_mib_fetch_port_stat(struct ar40xx_priv *priv, int port, bool flush)
-{
- unsigned int base;
- u64 *mib_stats;
- int i;
- u32 num_mibs = ARRAY_SIZE(ar40xx_mibs);
-
- WARN_ON(port >= priv->dev.ports);
-
- lockdep_assert_held(&priv->mib_lock);
-
- base = AR40XX_REG_PORT_STATS_START +
- AR40XX_REG_PORT_STATS_LEN * port;
-
- mib_stats = &priv->mib_stats[port * num_mibs];
- if (flush) {
- u32 len;
-
- len = num_mibs * sizeof(*mib_stats);
- memset(mib_stats, 0, len);
- return;
- }
- for (i = 0; i < num_mibs; i++) {
- const struct ar40xx_mib_desc *mib;
- u64 t;
-
- mib = &ar40xx_mibs[i];
- t = ar40xx_read(priv, base + mib->offset);
- if (mib->size == 2) {
- u64 hi;
-
- hi = ar40xx_read(priv, base + mib->offset + 4);
- t |= hi << 32;
- }
-
- mib_stats[i] += t;
- }
-}
-
-static int
-ar40xx_mib_capture(struct ar40xx_priv *priv)
-{
- return ar40xx_mib_op(priv, AR40XX_MIB_FUNC_CAPTURE);
-}
-
-static int
-ar40xx_mib_flush(struct ar40xx_priv *priv)
-{
- return ar40xx_mib_op(priv, AR40XX_MIB_FUNC_FLUSH);
-}
-
-static int
-ar40xx_sw_set_reset_mibs(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
- unsigned int len;
- int ret;
- u32 num_mibs = ARRAY_SIZE(ar40xx_mibs);
-
- mutex_lock(&priv->mib_lock);
-
- len = priv->dev.ports * num_mibs * sizeof(*priv->mib_stats);
- memset(priv->mib_stats, 0, len);
- ret = ar40xx_mib_flush(priv);
-
- mutex_unlock(&priv->mib_lock);
- return ret;
-}
-
-static int
-ar40xx_sw_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- priv->vlan = !!val->value.i;
- return 0;
-}
-
-static int
-ar40xx_sw_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- val->value.i = priv->vlan;
- return 0;
-}
-
-static int
-ar40xx_sw_set_mirror_rx_enable(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- mutex_lock(&priv->reg_mutex);
- priv->mirror_rx = !!val->value.i;
- ar40xx_set_mirror_regs(priv);
- mutex_unlock(&priv->reg_mutex);
-
- return 0;
-}
-
-static int
-ar40xx_sw_get_mirror_rx_enable(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- mutex_lock(&priv->reg_mutex);
- val->value.i = priv->mirror_rx;
- mutex_unlock(&priv->reg_mutex);
- return 0;
-}
-
-static int
-ar40xx_sw_set_mirror_tx_enable(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- mutex_lock(&priv->reg_mutex);
- priv->mirror_tx = !!val->value.i;
- ar40xx_set_mirror_regs(priv);
- mutex_unlock(&priv->reg_mutex);
-
- return 0;
-}
-
-static int
-ar40xx_sw_get_mirror_tx_enable(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- mutex_lock(&priv->reg_mutex);
- val->value.i = priv->mirror_tx;
- mutex_unlock(&priv->reg_mutex);
- return 0;
-}
-
-static int
-ar40xx_sw_set_mirror_monitor_port(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- mutex_lock(&priv->reg_mutex);
- priv->monitor_port = val->value.i;
- ar40xx_set_mirror_regs(priv);
- mutex_unlock(&priv->reg_mutex);
-
- return 0;
-}
-
-static int
-ar40xx_sw_get_mirror_monitor_port(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- mutex_lock(&priv->reg_mutex);
- val->value.i = priv->monitor_port;
- mutex_unlock(&priv->reg_mutex);
- return 0;
-}
-
-static int
-ar40xx_sw_set_mirror_source_port(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- mutex_lock(&priv->reg_mutex);
- priv->source_port = val->value.i;
- ar40xx_set_mirror_regs(priv);
- mutex_unlock(&priv->reg_mutex);
-
- return 0;
-}
-
-static int
-ar40xx_sw_get_mirror_source_port(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- mutex_lock(&priv->reg_mutex);
- val->value.i = priv->source_port;
- mutex_unlock(&priv->reg_mutex);
- return 0;
-}
-
-static int
-ar40xx_sw_set_linkdown(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- if (val->value.i == 1)
- ar40xx_port_phy_linkdown(priv);
- else
- ar40xx_phy_init(priv);
-
- return 0;
-}
-
-static int
-ar40xx_sw_set_port_reset_mib(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
- int port;
- int ret;
-
- port = val->port_vlan;
- if (port >= dev->ports)
- return -EINVAL;
-
- mutex_lock(&priv->mib_lock);
- ret = ar40xx_mib_capture(priv);
- if (ret)
- goto unlock;
-
- ar40xx_mib_fetch_port_stat(priv, port, true);
-
-unlock:
- mutex_unlock(&priv->mib_lock);
- return ret;
-}
-
-static int
-ar40xx_sw_get_port_mib(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
- u64 *mib_stats;
- int port;
- int ret;
- char *buf = priv->buf;
- int i, len = 0;
- u32 num_mibs = ARRAY_SIZE(ar40xx_mibs);
-
- port = val->port_vlan;
- if (port >= dev->ports)
- return -EINVAL;
-
- mutex_lock(&priv->mib_lock);
- ret = ar40xx_mib_capture(priv);
- if (ret)
- goto unlock;
-
- ar40xx_mib_fetch_port_stat(priv, port, false);
-
- len += snprintf(buf + len, sizeof(priv->buf) - len,
- "Port %d MIB counters\n",
- port);
-
- mib_stats = &priv->mib_stats[port * num_mibs];
- for (i = 0; i < num_mibs; i++)
- len += snprintf(buf + len, sizeof(priv->buf) - len,
- "%-12s: %llu\n",
- ar40xx_mibs[i].name,
- mib_stats[i]);
-
- val->value.s = buf;
- val->len = len;
-
-unlock:
- mutex_unlock(&priv->mib_lock);
- return ret;
-}
-
-static int
-ar40xx_sw_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- priv->vlan_id[val->port_vlan] = val->value.i;
- return 0;
-}
-
-static int
-ar40xx_sw_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- val->value.i = priv->vlan_id[val->port_vlan];
- return 0;
-}
-
-static int
-ar40xx_sw_get_pvid(struct switch_dev *dev, int port, int *vlan)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
- *vlan = priv->pvid[port];
- return 0;
-}
-
-static int
-ar40xx_sw_set_pvid(struct switch_dev *dev, int port, int vlan)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- /* make sure no invalid PVIDs get set */
- if (vlan >= dev->vlans)
- return -EINVAL;
-
- priv->pvid[port] = vlan;
- return 0;
-}
-
-static void
-ar40xx_read_port_link(struct ar40xx_priv *priv, int port,
- struct switch_port_link *link)
-{
- u32 status;
- u32 speed;
-
- memset(link, 0, sizeof(*link));
-
- status = ar40xx_read(priv, AR40XX_REG_PORT_STATUS(port));
-
- link->aneg = !!(status & AR40XX_PORT_AUTO_LINK_EN);
- if (link->aneg || (port != AR40XX_PORT_CPU))
- link->link = !!(status & AR40XX_PORT_STATUS_LINK_UP);
- else
- link->link = true;
-
- if (!link->link)
- return;
-
- link->duplex = !!(status & AR40XX_PORT_DUPLEX);
- link->tx_flow = !!(status & AR40XX_PORT_STATUS_TXFLOW);
- link->rx_flow = !!(status & AR40XX_PORT_STATUS_RXFLOW);
-
- speed = (status & AR40XX_PORT_SPEED) >>
- AR40XX_PORT_STATUS_SPEED_S;
-
- switch (speed) {
- case AR40XX_PORT_SPEED_10M:
- link->speed = SWITCH_PORT_SPEED_10;
- break;
- case AR40XX_PORT_SPEED_100M:
- link->speed = SWITCH_PORT_SPEED_100;
- break;
- case AR40XX_PORT_SPEED_1000M:
- link->speed = SWITCH_PORT_SPEED_1000;
- break;
- default:
- link->speed = SWITCH_PORT_SPEED_UNKNOWN;
- break;
- }
-}
-
-static int
-ar40xx_sw_get_port_link(struct switch_dev *dev, int port,
- struct switch_port_link *link)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- ar40xx_read_port_link(priv, port, link);
- return 0;
-}
-
-static const struct switch_attr ar40xx_sw_attr_globals[] = {
- {
- .type = SWITCH_TYPE_INT,
- .name = "enable_vlan",
- .description = "Enable VLAN mode",
- .set = ar40xx_sw_set_vlan,
- .get = ar40xx_sw_get_vlan,
- .max = 1
- },
- {
- .type = SWITCH_TYPE_NOVAL,
- .name = "reset_mibs",
- .description = "Reset all MIB counters",
- .set = ar40xx_sw_set_reset_mibs,
- },
- {
- .type = SWITCH_TYPE_INT,
- .name = "enable_mirror_rx",
- .description = "Enable mirroring of RX packets",
- .set = ar40xx_sw_set_mirror_rx_enable,
- .get = ar40xx_sw_get_mirror_rx_enable,
- .max = 1
- },
- {
- .type = SWITCH_TYPE_INT,
- .name = "enable_mirror_tx",
- .description = "Enable mirroring of TX packets",
- .set = ar40xx_sw_set_mirror_tx_enable,
- .get = ar40xx_sw_get_mirror_tx_enable,
- .max = 1
- },
- {
- .type = SWITCH_TYPE_INT,
- .name = "mirror_monitor_port",
- .description = "Mirror monitor port",
- .set = ar40xx_sw_set_mirror_monitor_port,
- .get = ar40xx_sw_get_mirror_monitor_port,
- .max = AR40XX_NUM_PORTS - 1
- },
- {
- .type = SWITCH_TYPE_INT,
- .name = "mirror_source_port",
- .description = "Mirror source port",
- .set = ar40xx_sw_set_mirror_source_port,
- .get = ar40xx_sw_get_mirror_source_port,
- .max = AR40XX_NUM_PORTS - 1
- },
- {
- .type = SWITCH_TYPE_INT,
- .name = "linkdown",
- .description = "Link down all the PHYs",
- .set = ar40xx_sw_set_linkdown,
- .max = 1
- },
-};
-
-static const struct switch_attr ar40xx_sw_attr_port[] = {
- {
- .type = SWITCH_TYPE_NOVAL,
- .name = "reset_mib",
- .description = "Reset single port MIB counters",
- .set = ar40xx_sw_set_port_reset_mib,
- },
- {
- .type = SWITCH_TYPE_STRING,
- .name = "mib",
- .description = "Get port's MIB counters",
- .set = NULL,
- .get = ar40xx_sw_get_port_mib,
- },
-};
-
-const struct switch_attr ar40xx_sw_attr_vlan[] = {
- {
- .type = SWITCH_TYPE_INT,
- .name = "vid",
- .description = "VLAN ID (0-4094)",
- .set = ar40xx_sw_set_vid,
- .get = ar40xx_sw_get_vid,
- .max = 4094,
- },
-};
-
-/* End of swconfig support */
-
-static int
-ar40xx_wait_bit(struct ar40xx_priv *priv, int reg, u32 mask, u32 val)
-{
- int timeout = 20;
- u32 t;
-
- while (1) {
- t = ar40xx_read(priv, reg);
- if ((t & mask) == val)
- return 0;
-
- if (timeout-- <= 0)
- break;
-
- usleep_range(10, 20);
- }
-
- pr_err("ar40xx: timeout for reg %08x: %08x & %08x != %08x\n",
- (unsigned int)reg, t, mask, val);
- return -ETIMEDOUT;
-}
-
-static int
-ar40xx_atu_flush(struct ar40xx_priv *priv)
-{
- int ret;
-
- ret = ar40xx_wait_bit(priv, AR40XX_REG_ATU_FUNC,
- AR40XX_ATU_FUNC_BUSY, 0);
- if (!ret)
- ar40xx_write(priv, AR40XX_REG_ATU_FUNC,
- AR40XX_ATU_FUNC_OP_FLUSH |
- AR40XX_ATU_FUNC_BUSY);
-
- return ret;
-}
-
-static void
-ar40xx_ess_reset(struct ar40xx_priv *priv)
-{
- reset_control_assert(priv->ess_rst);
- mdelay(10);
- reset_control_deassert(priv->ess_rst);
- /* Waiting for all inner tables init done.
- * It cost 5~10ms.
- */
- mdelay(10);
-
- pr_info("ESS reset ok!\n");
-}
-
-/* Start of psgmii self test */
-
-static void
-ar40xx_malibu_psgmii_ess_reset(struct ar40xx_priv *priv)
-{
- u32 n;
- struct mii_bus *bus = priv->mii_bus;
- /* reset phy psgmii */
- /* fix phy psgmii RX 20bit */
- mdiobus_write(bus, 5, 0x0, 0x005b);
- /* reset phy psgmii */
- mdiobus_write(bus, 5, 0x0, 0x001b);
- /* release reset phy psgmii */
- mdiobus_write(bus, 5, 0x0, 0x005b);
-
- for (n = 0; n < AR40XX_PSGMII_CALB_NUM; n++) {
- u16 status;
-
- status = ar40xx_phy_mmd_read(priv, 5, 1, 0x28);
- if (status & BIT(0))
- break;
- /* Polling interval to check PSGMII PLL in malibu is ready
- * the worst time is 8.67ms
- * for 25MHz reference clock
- * [512+(128+2048)*49]*80ns+100us
- */
- mdelay(2);
- }
- mdelay(50);
-
- /*check malibu psgmii calibration done end..*/
-
- /*freeze phy psgmii RX CDR*/
- mdiobus_write(bus, 5, 0x1a, 0x2230);
-
- ar40xx_ess_reset(priv);
-
- /*check psgmii calibration done start*/
- for (n = 0; n < AR40XX_PSGMII_CALB_NUM; n++) {
- u32 status;
-
- status = ar40xx_psgmii_read(priv, 0xa0);
- if (status & BIT(0))
- break;
- /* Polling interval to check PSGMII PLL in ESS is ready */
- mdelay(2);
- }
- mdelay(50);
-
- /* check dakota psgmii calibration done end..*/
-
- /* relesae phy psgmii RX CDR */
- mdiobus_write(bus, 5, 0x1a, 0x3230);
- /* release phy psgmii RX 20bit */
- mdiobus_write(bus, 5, 0x0, 0x005f);
- mdelay(200);
-}
-
-static void
-ar40xx_psgmii_single_phy_testing(struct ar40xx_priv *priv, int phy)
-{
- int j;
- u32 tx_ok, tx_error;
- u32 rx_ok, rx_error;
- u32 tx_ok_high16;
- u32 rx_ok_high16;
- u32 tx_all_ok, rx_all_ok;
- struct mii_bus *bus = priv->mii_bus;
-
- mdiobus_write(bus, phy, 0x0, 0x9000);
- mdiobus_write(bus, phy, 0x0, 0x4140);
-
- for (j = 0; j < AR40XX_PSGMII_CALB_NUM; j++) {
- u16 status;
-
- status = mdiobus_read(bus, phy, 0x11);
- if (status & AR40XX_PHY_SPEC_STATUS_LINK)
- break;
- /* the polling interval to check if the PHY link up or not
- * maxwait_timer: 750 ms +/-10 ms
- * minwait_timer : 1 us +/- 0.1us
- * time resides in minwait_timer ~ maxwait_timer
- * see IEEE 802.3 section 40.4.5.2
- */
- mdelay(8);
- }
-
- /* enable check */
- ar40xx_phy_mmd_write(priv, phy, 7, 0x8029, 0x0000);
- ar40xx_phy_mmd_write(priv, phy, 7, 0x8029, 0x0003);
-
- /* start traffic */
- ar40xx_phy_mmd_write(priv, phy, 7, 0x8020, 0xa000);
- /* wait for all traffic end
- * 4096(pkt num)*1524(size)*8ns(125MHz)=49.9ms
- */
- mdelay(50);
-
- /* check counter */
- tx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802e);
- tx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802d);
- tx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802f);
- rx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802b);
- rx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802a);
- rx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802c);
- tx_all_ok = tx_ok + (tx_ok_high16 << 16);
- rx_all_ok = rx_ok + (rx_ok_high16 << 16);
- if (tx_all_ok == 0x1000 && tx_error == 0) {
- /* success */
- priv->phy_t_status &= (~BIT(phy));
- } else {
- pr_info("PHY %d single test PSGMII issue happen!\n", phy);
- priv->phy_t_status |= BIT(phy);
- }
-
- mdiobus_write(bus, phy, 0x0, 0x1840);
-}
-
-static void
-ar40xx_psgmii_all_phy_testing(struct ar40xx_priv *priv)
-{
- int phy, j;
- struct mii_bus *bus = priv->mii_bus;
-
- mdiobus_write(bus, 0x1f, 0x0, 0x9000);
- mdiobus_write(bus, 0x1f, 0x0, 0x4140);
-
- for (j = 0; j < AR40XX_PSGMII_CALB_NUM; j++) {
- for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
- u16 status;
-
- status = mdiobus_read(bus, phy, 0x11);
- if (!(status & BIT(10)))
- break;
- }
-
- if (phy >= (AR40XX_NUM_PORTS - 1))
- break;
- /* The polling interva to check if the PHY link up or not */
- mdelay(8);
- }
- /* enable check */
- ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0000);
- ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0003);
-
- /* start traffic */
- ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8020, 0xa000);
- /* wait for all traffic end
- * 4096(pkt num)*1524(size)*8ns(125MHz)=49.9ms
- */
- mdelay(50);
-
- for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
- u32 tx_ok, tx_error;
- u32 rx_ok, rx_error;
- u32 tx_ok_high16;
- u32 rx_ok_high16;
- u32 tx_all_ok, rx_all_ok;
-
- /* check counter */
- tx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802e);
- tx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802d);
- tx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802f);
- rx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802b);
- rx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802a);
- rx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802c);
- tx_all_ok = tx_ok + (tx_ok_high16<<16);
- rx_all_ok = rx_ok + (rx_ok_high16<<16);
- if (tx_all_ok == 0x1000 && tx_error == 0) {
- /* success */
- priv->phy_t_status &= ~BIT(phy + 8);
- } else {
- pr_info("PHY%d test see issue!\n", phy);
- priv->phy_t_status |= BIT(phy + 8);
- }
- }
-
- pr_debug("PHY all test 0x%x \r\n", priv->phy_t_status);
-}
-
-void
-ar40xx_psgmii_self_test(struct ar40xx_priv *priv)
-{
- u32 i, phy;
- struct mii_bus *bus = priv->mii_bus;
-
- ar40xx_malibu_psgmii_ess_reset(priv);
-
- /* switch to access MII reg for copper */
- mdiobus_write(bus, 4, 0x1f, 0x8500);
- for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
- /*enable phy mdio broadcast write*/
- ar40xx_phy_mmd_write(priv, phy, 7, 0x8028, 0x801f);
- }
- /* force no link by power down */
- mdiobus_write(bus, 0x1f, 0x0, 0x1840);
- /*packet number*/
- ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8021, 0x1000);
- ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8062, 0x05e0);
-
- /*fix mdi status */
- mdiobus_write(bus, 0x1f, 0x10, 0x6800);
- for (i = 0; i < AR40XX_PSGMII_CALB_NUM; i++) {
- priv->phy_t_status = 0;
-
- for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
- ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(phy + 1),
- AR40XX_PORT_LOOKUP_LOOPBACK,
- AR40XX_PORT_LOOKUP_LOOPBACK);
- }
-
- for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++)
- ar40xx_psgmii_single_phy_testing(priv, phy);
-
- ar40xx_psgmii_all_phy_testing(priv);
-
- if (priv->phy_t_status)
- ar40xx_malibu_psgmii_ess_reset(priv);
- else
- break;
- }
-
- if (i >= AR40XX_PSGMII_CALB_NUM)
- pr_info("PSGMII cannot recover\n");
- else
- pr_debug("PSGMII recovered after %d times reset\n", i);
-
- /* configuration recover */
- /* packet number */
- ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8021, 0x0);
- /* disable check */
- ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0);
- /* disable traffic */
- ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8020, 0x0);
-}
-
-void
-ar40xx_psgmii_self_test_clean(struct ar40xx_priv *priv)
-{
- int phy;
- struct mii_bus *bus = priv->mii_bus;
-
- /* disable phy internal loopback */
- mdiobus_write(bus, 0x1f, 0x10, 0x6860);
- mdiobus_write(bus, 0x1f, 0x0, 0x9040);
-
- for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
- /* disable mac loop back */
- ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(phy + 1),
- AR40XX_PORT_LOOKUP_LOOPBACK, 0);
- /* disable phy mdio broadcast write */
- ar40xx_phy_mmd_write(priv, phy, 7, 0x8028, 0x001f);
- }
-
- /* clear fdb entry */
- ar40xx_atu_flush(priv);
-}
-
-/* End of psgmii self test */
-
-static void
-ar40xx_mac_mode_init(struct ar40xx_priv *priv, u32 mode)
-{
- if (mode == PORT_WRAPPER_PSGMII) {
- ar40xx_psgmii_write(priv, AR40XX_PSGMII_MODE_CONTROL, 0x2200);
- ar40xx_psgmii_write(priv, AR40XX_PSGMIIPHY_TX_CONTROL, 0x8380);
- }
-}
-
-static
-int ar40xx_cpuport_setup(struct ar40xx_priv *priv)
-{
- u32 t;
-
- t = AR40XX_PORT_STATUS_TXFLOW |
- AR40XX_PORT_STATUS_RXFLOW |
- AR40XX_PORT_TXHALF_FLOW |
- AR40XX_PORT_DUPLEX |
- AR40XX_PORT_SPEED_1000M;
- ar40xx_write(priv, AR40XX_REG_PORT_STATUS(0), t);
- usleep_range(10, 20);
-
- t |= AR40XX_PORT_TX_EN |
- AR40XX_PORT_RX_EN;
- ar40xx_write(priv, AR40XX_REG_PORT_STATUS(0), t);
-
- return 0;
-}
-
-static void
-ar40xx_init_port(struct ar40xx_priv *priv, int port)
-{
- u32 t;
-
- ar40xx_write(priv, AR40XX_REG_PORT_STATUS(port), 0);
-
- ar40xx_write(priv, AR40XX_REG_PORT_HEADER(port), 0);
-
- ar40xx_write(priv, AR40XX_REG_PORT_VLAN0(port), 0);
-
- t = AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH << AR40XX_PORT_VLAN1_OUT_MODE_S;
- ar40xx_write(priv, AR40XX_REG_PORT_VLAN1(port), t);
-
- t = AR40XX_PORT_LOOKUP_LEARN;
- t |= AR40XX_PORT_STATE_FORWARD << AR40XX_PORT_LOOKUP_STATE_S;
- ar40xx_write(priv, AR40XX_REG_PORT_LOOKUP(port), t);
-}
-
-void
-ar40xx_init_globals(struct ar40xx_priv *priv)
-{
- u32 t;
-
- /* enable CPU port and disable mirror port */
- t = AR40XX_FWD_CTRL0_CPU_PORT_EN |
- AR40XX_FWD_CTRL0_MIRROR_PORT;
- ar40xx_write(priv, AR40XX_REG_FWD_CTRL0, t);
-
- /* forward multicast and broadcast frames to CPU */
- t = (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_UC_FLOOD_S) |
- (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_MC_FLOOD_S) |
- (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_BC_FLOOD_S);
- ar40xx_write(priv, AR40XX_REG_FWD_CTRL1, t);
-
- /* enable jumbo frames */
- ar40xx_rmw(priv, AR40XX_REG_MAX_FRAME_SIZE,
- AR40XX_MAX_FRAME_SIZE_MTU, 9018 + 8 + 2);
-
- /* Enable MIB counters */
- ar40xx_rmw(priv, AR40XX_REG_MODULE_EN, 0,
- AR40XX_MODULE_EN_MIB);
-
- /* Disable AZ */
- ar40xx_write(priv, AR40XX_REG_EEE_CTRL, 0);
-
- /* set flowctrl thershold for cpu port */
- t = (AR40XX_PORT0_FC_THRESH_ON_DFLT << 16) |
- AR40XX_PORT0_FC_THRESH_OFF_DFLT;
- ar40xx_write(priv, AR40XX_REG_PORT_FLOWCTRL_THRESH(0), t);
-}
-
-static int
-ar40xx_hw_init(struct ar40xx_priv *priv)
-{
- u32 i;
-
- ar40xx_ess_reset(priv);
-
- if (!priv->mii_bus)
- return -1;
-
- ar40xx_psgmii_self_test(priv);
- ar40xx_psgmii_self_test_clean(priv);
-
- ar40xx_mac_mode_init(priv, priv->mac_mode);
-
- for (i = 0; i < priv->dev.ports; i++)
- ar40xx_init_port(priv, i);
-
- ar40xx_init_globals(priv);
-
- return 0;
-}
-
-/* Start of qm error WAR */
-
-static
-int ar40xx_force_1g_full(struct ar40xx_priv *priv, u32 port_id)
-{
- u32 reg;
-
- if (port_id < 0 || port_id > 6)
- return -1;
-
- reg = AR40XX_REG_PORT_STATUS(port_id);
- return ar40xx_rmw(priv, reg, AR40XX_PORT_SPEED,
- (AR40XX_PORT_SPEED_1000M | AR40XX_PORT_DUPLEX));
-}
-
-static
-int ar40xx_get_qm_status(struct ar40xx_priv *priv,
- u32 port_id, u32 *qm_buffer_err)
-{
- u32 reg;
- u32 qm_val;
-
- if (port_id < 1 || port_id > 5) {
- *qm_buffer_err = 0;
- return -1;
- }
-
- if (port_id < 4) {
- reg = AR40XX_REG_QM_PORT0_3_QNUM;
- ar40xx_write(priv, AR40XX_REG_QM_DEBUG_ADDR, reg);
- qm_val = ar40xx_read(priv, AR40XX_REG_QM_DEBUG_VALUE);
- /* every 8 bits for each port */
- *qm_buffer_err = (qm_val >> (port_id * 8)) & 0xFF;
- } else {
- reg = AR40XX_REG_QM_PORT4_6_QNUM;
- ar40xx_write(priv, AR40XX_REG_QM_DEBUG_ADDR, reg);
- qm_val = ar40xx_read(priv, AR40XX_REG_QM_DEBUG_VALUE);
- /* every 8 bits for each port */
- *qm_buffer_err = (qm_val >> ((port_id-4) * 8)) & 0xFF;
- }
-
- return 0;
-}
-
-static void
-ar40xx_sw_mac_polling_task(struct ar40xx_priv *priv)
-{
- static int task_count;
- u32 i;
- u32 reg, value;
- u32 link, speed, duplex;
- u32 qm_buffer_err;
- u16 port_phy_status[AR40XX_NUM_PORTS];
- static u32 qm_err_cnt[AR40XX_NUM_PORTS] = {0, 0, 0, 0, 0, 0};
- static u32 link_cnt[AR40XX_NUM_PORTS] = {0, 0, 0, 0, 0, 0};
- struct mii_bus *bus = NULL;
-
- if (!priv || !priv->mii_bus)
- return;
-
- bus = priv->mii_bus;
-
- ++task_count;
-
- for (i = 1; i < AR40XX_NUM_PORTS; ++i) {
- port_phy_status[i] =
- mdiobus_read(bus, i-1, AR40XX_PHY_SPEC_STATUS);
-
- speed = FIELD_GET(AR40XX_PHY_SPEC_STATUS_SPEED,
- port_phy_status[i]);
- link = FIELD_GET(AR40XX_PHY_SPEC_STATUS_LINK,
- port_phy_status[i]);
- duplex = FIELD_GET(AR40XX_PHY_SPEC_STATUS_DUPLEX,
- port_phy_status[i]);
-
- if (link != priv->ar40xx_port_old_link[i]) {
- ++link_cnt[i];
- /* Up --> Down */
- if ((priv->ar40xx_port_old_link[i] ==
- AR40XX_PORT_LINK_UP) &&
- (link == AR40XX_PORT_LINK_DOWN)) {
- /* LINK_EN disable(MAC force mode)*/
- reg = AR40XX_REG_PORT_STATUS(i);
- ar40xx_rmw(priv, reg,
- AR40XX_PORT_AUTO_LINK_EN, 0);
-
- /* Check queue buffer */
- qm_err_cnt[i] = 0;
- ar40xx_get_qm_status(priv, i, &qm_buffer_err);
- if (qm_buffer_err) {
- priv->ar40xx_port_qm_buf[i] =
- AR40XX_QM_NOT_EMPTY;
- } else {
- u16 phy_val = 0;
-
- priv->ar40xx_port_qm_buf[i] =
- AR40XX_QM_EMPTY;
- ar40xx_force_1g_full(priv, i);
- /* Ref:QCA8337 Datasheet,Clearing
- * MENU_CTRL_EN prevents phy to
- * stuck in 100BT mode when
- * bringing up the link
- */
- ar40xx_phy_dbg_read(priv, i-1,
- AR40XX_PHY_DEBUG_0,
- &phy_val);
- phy_val &= (~AR40XX_PHY_MANU_CTRL_EN);
- ar40xx_phy_dbg_write(priv, i-1,
- AR40XX_PHY_DEBUG_0,
- phy_val);
- }
- priv->ar40xx_port_old_link[i] = link;
- } else if ((priv->ar40xx_port_old_link[i] ==
- AR40XX_PORT_LINK_DOWN) &&
- (link == AR40XX_PORT_LINK_UP)) {
- /* Down --> Up */
- if (priv->port_link_up[i] < 1) {
- ++priv->port_link_up[i];
- } else {
- /* Change port status */
- reg = AR40XX_REG_PORT_STATUS(i);
- value = ar40xx_read(priv, reg);
- priv->port_link_up[i] = 0;
-
- value &= ~(AR40XX_PORT_DUPLEX |
- AR40XX_PORT_SPEED);
- value |= speed | (duplex ? BIT(6) : 0);
- ar40xx_write(priv, reg, value);
- /* clock switch need such time
- * to avoid glitch
- */
- usleep_range(100, 200);
-
- value |= AR40XX_PORT_AUTO_LINK_EN;
- ar40xx_write(priv, reg, value);
- /* HW need such time to make sure link
- * stable before enable MAC
- */
- usleep_range(100, 200);
-
- if (speed == AR40XX_PORT_SPEED_100M) {
- u16 phy_val = 0;
- /* Enable @100M, if down to 10M
- * clock will change smoothly
- */
- ar40xx_phy_dbg_read(priv, i-1,
- 0,
- &phy_val);
- phy_val |=
- AR40XX_PHY_MANU_CTRL_EN;
- ar40xx_phy_dbg_write(priv, i-1,
- 0,
- phy_val);
- }
- priv->ar40xx_port_old_link[i] = link;
- }
- }
- }
-
- if (priv->ar40xx_port_qm_buf[i] == AR40XX_QM_NOT_EMPTY) {
- /* Check QM */
- ar40xx_get_qm_status(priv, i, &qm_buffer_err);
- if (qm_buffer_err) {
- ++qm_err_cnt[i];
- } else {
- priv->ar40xx_port_qm_buf[i] =
- AR40XX_QM_EMPTY;
- qm_err_cnt[i] = 0;
- ar40xx_force_1g_full(priv, i);
- }
- }
- }
-}
-
-static void
-ar40xx_qm_err_check_work_task(struct work_struct *work)
-{
- struct ar40xx_priv *priv = container_of(work, struct ar40xx_priv,
- qm_dwork.work);
-
- mutex_lock(&priv->qm_lock);
-
- ar40xx_sw_mac_polling_task(priv);
-
- mutex_unlock(&priv->qm_lock);
-
- schedule_delayed_work(&priv->qm_dwork,
- msecs_to_jiffies(AR40XX_QM_WORK_DELAY));
-}
-
-static int
-ar40xx_qm_err_check_work_start(struct ar40xx_priv *priv)
-{
- mutex_init(&priv->qm_lock);
-
- INIT_DELAYED_WORK(&priv->qm_dwork, ar40xx_qm_err_check_work_task);
-
- schedule_delayed_work(&priv->qm_dwork,
- msecs_to_jiffies(AR40XX_QM_WORK_DELAY));
-
- return 0;
-}
-
-/* End of qm error WAR */
-
-static int
-ar40xx_vlan_init(struct ar40xx_priv *priv)
-{
- int port;
- unsigned long bmp;
-
- /* By default Enable VLAN */
- priv->vlan = 1;
- priv->vlan_table[AR40XX_LAN_VLAN] = priv->cpu_bmp | priv->lan_bmp;
- priv->vlan_table[AR40XX_WAN_VLAN] = priv->cpu_bmp | priv->wan_bmp;
- priv->vlan_tagged = priv->cpu_bmp;
- bmp = priv->lan_bmp;
- for_each_set_bit(port, &bmp, AR40XX_NUM_PORTS)
- priv->pvid[port] = AR40XX_LAN_VLAN;
-
- bmp = priv->wan_bmp;
- for_each_set_bit(port, &bmp, AR40XX_NUM_PORTS)
- priv->pvid[port] = AR40XX_WAN_VLAN;
-
- return 0;
-}
-
-static void
-ar40xx_mib_work_func(struct work_struct *work)
-{
- struct ar40xx_priv *priv;
- int err;
-
- priv = container_of(work, struct ar40xx_priv, mib_work.work);
-
- mutex_lock(&priv->mib_lock);
-
- err = ar40xx_mib_capture(priv);
- if (err)
- goto next_port;
-
- ar40xx_mib_fetch_port_stat(priv, priv->mib_next_port, false);
-
-next_port:
- priv->mib_next_port++;
- if (priv->mib_next_port >= priv->dev.ports)
- priv->mib_next_port = 0;
-
- mutex_unlock(&priv->mib_lock);
-
- schedule_delayed_work(&priv->mib_work,
- msecs_to_jiffies(AR40XX_MIB_WORK_DELAY));
-}
-
-static void
-ar40xx_setup_port(struct ar40xx_priv *priv, int port, u32 members)
-{
- u32 t;
- u32 egress, ingress;
- u32 pvid = priv->vlan_id[priv->pvid[port]];
-
- if (priv->vlan) {
- egress = AR40XX_PORT_VLAN1_OUT_MODE_UNMOD;
-
- ingress = AR40XX_IN_SECURE;
- } else {
- egress = AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH;
- ingress = AR40XX_IN_PORT_ONLY;
- }
-
- t = pvid << AR40XX_PORT_VLAN0_DEF_SVID_S;
- t |= pvid << AR40XX_PORT_VLAN0_DEF_CVID_S;
- ar40xx_write(priv, AR40XX_REG_PORT_VLAN0(port), t);
-
- t = AR40XX_PORT_VLAN1_PORT_VLAN_PROP;
- t |= egress << AR40XX_PORT_VLAN1_OUT_MODE_S;
-
- ar40xx_write(priv, AR40XX_REG_PORT_VLAN1(port), t);
-
- t = members;
- t |= AR40XX_PORT_LOOKUP_LEARN;
- t |= ingress << AR40XX_PORT_LOOKUP_IN_MODE_S;
- t |= AR40XX_PORT_STATE_FORWARD << AR40XX_PORT_LOOKUP_STATE_S;
- ar40xx_write(priv, AR40XX_REG_PORT_LOOKUP(port), t);
-}
-
-static void
-ar40xx_vtu_op(struct ar40xx_priv *priv, u32 op, u32 val)
-{
- if (ar40xx_wait_bit(priv, AR40XX_REG_VTU_FUNC1,
- AR40XX_VTU_FUNC1_BUSY, 0))
- return;
-
- if ((op & AR40XX_VTU_FUNC1_OP) == AR40XX_VTU_FUNC1_OP_LOAD)
- ar40xx_write(priv, AR40XX_REG_VTU_FUNC0, val);
-
- op |= AR40XX_VTU_FUNC1_BUSY;
- ar40xx_write(priv, AR40XX_REG_VTU_FUNC1, op);
-}
-
-static void
-ar40xx_vtu_load_vlan(struct ar40xx_priv *priv, u32 vid, u32 port_mask)
-{
- u32 op;
- u32 val;
- int i;
-
- op = AR40XX_VTU_FUNC1_OP_LOAD | (vid << AR40XX_VTU_FUNC1_VID_S);
- val = AR40XX_VTU_FUNC0_VALID | AR40XX_VTU_FUNC0_IVL;
- for (i = 0; i < AR40XX_NUM_PORTS; i++) {
- u32 mode;
-
- if ((port_mask & BIT(i)) == 0)
- mode = AR40XX_VTU_FUNC0_EG_MODE_NOT;
- else if (priv->vlan == 0)
- mode = AR40XX_VTU_FUNC0_EG_MODE_KEEP;
- else if ((priv->vlan_tagged & BIT(i)) ||
- (priv->vlan_id[priv->pvid[i]] != vid))
- mode = AR40XX_VTU_FUNC0_EG_MODE_TAG;
- else
- mode = AR40XX_VTU_FUNC0_EG_MODE_UNTAG;
-
- val |= mode << AR40XX_VTU_FUNC0_EG_MODE_S(i);
- }
- ar40xx_vtu_op(priv, op, val);
-}
-
-static void
-ar40xx_vtu_flush(struct ar40xx_priv *priv)
-{
- ar40xx_vtu_op(priv, AR40XX_VTU_FUNC1_OP_FLUSH, 0);
-}
-
-static int
-ar40xx_sw_hw_apply(struct switch_dev *dev)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
- u8 portmask[AR40XX_NUM_PORTS];
- int i, j;
-
- mutex_lock(&priv->reg_mutex);
- /* flush all vlan entries */
- ar40xx_vtu_flush(priv);
-
- memset(portmask, 0, sizeof(portmask));
- if (priv->vlan) {
- for (j = 0; j < AR40XX_MAX_VLANS; j++) {
- u8 vp = priv->vlan_table[j];
-
- if (!vp)
- continue;
-
- for (i = 0; i < dev->ports; i++) {
- u8 mask = BIT(i);
-
- if (vp & mask)
- portmask[i] |= vp & ~mask;
- }
-
- ar40xx_vtu_load_vlan(priv, priv->vlan_id[j],
- priv->vlan_table[j]);
- }
- } else {
- /* 8021q vlan disabled */
- for (i = 0; i < dev->ports; i++) {
- if (i == AR40XX_PORT_CPU)
- continue;
-
- portmask[i] = BIT(AR40XX_PORT_CPU);
- portmask[AR40XX_PORT_CPU] |= BIT(i);
- }
- }
-
- /* update the port destination mask registers and tag settings */
- for (i = 0; i < dev->ports; i++)
- ar40xx_setup_port(priv, i, portmask[i]);
-
- ar40xx_set_mirror_regs(priv);
-
- mutex_unlock(&priv->reg_mutex);
- return 0;
-}
-
-static int
-ar40xx_sw_reset_switch(struct switch_dev *dev)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
- int i, rv;
-
- mutex_lock(&priv->reg_mutex);
- memset(&priv->vlan, 0, sizeof(struct ar40xx_priv) -
- offsetof(struct ar40xx_priv, vlan));
-
- for (i = 0; i < AR40XX_MAX_VLANS; i++)
- priv->vlan_id[i] = i;
-
- ar40xx_vlan_init(priv);
-
- priv->mirror_rx = false;
- priv->mirror_tx = false;
- priv->source_port = 0;
- priv->monitor_port = 0;
-
- mutex_unlock(&priv->reg_mutex);
-
- rv = ar40xx_sw_hw_apply(dev);
- return rv;
-}
-
-static int
-ar40xx_start(struct ar40xx_priv *priv)
-{
- int ret;
-
- ret = ar40xx_hw_init(priv);
- if (ret)
- return ret;
-
- ret = ar40xx_sw_reset_switch(&priv->dev);
- if (ret)
- return ret;
-
- /* at last, setup cpu port */
- ret = ar40xx_cpuport_setup(priv);
- if (ret)
- return ret;
-
- schedule_delayed_work(&priv->mib_work,
- msecs_to_jiffies(AR40XX_MIB_WORK_DELAY));
-
- ar40xx_qm_err_check_work_start(priv);
-
- return 0;
-}
-
-static const struct switch_dev_ops ar40xx_sw_ops = {
- .attr_global = {
- .attr = ar40xx_sw_attr_globals,
- .n_attr = ARRAY_SIZE(ar40xx_sw_attr_globals),
- },
- .attr_port = {
- .attr = ar40xx_sw_attr_port,
- .n_attr = ARRAY_SIZE(ar40xx_sw_attr_port),
- },
- .attr_vlan = {
- .attr = ar40xx_sw_attr_vlan,
- .n_attr = ARRAY_SIZE(ar40xx_sw_attr_vlan),
- },
- .get_port_pvid = ar40xx_sw_get_pvid,
- .set_port_pvid = ar40xx_sw_set_pvid,
- .get_vlan_ports = ar40xx_sw_get_ports,
- .set_vlan_ports = ar40xx_sw_set_ports,
- .apply_config = ar40xx_sw_hw_apply,
- .reset_switch = ar40xx_sw_reset_switch,
- .get_port_link = ar40xx_sw_get_port_link,
-};
-
-/* Platform driver probe function */
-
-static int ar40xx_probe(struct platform_device *pdev)
-{
- struct device_node *switch_node;
- struct device_node *psgmii_node;
- struct device_node *mdio_node;
- const __be32 *mac_mode;
- struct clk *ess_clk;
- struct switch_dev *swdev;
- struct ar40xx_priv *priv;
- u32 len;
- u32 num_mibs;
- struct resource psgmii_base = {0};
- struct resource switch_base = {0};
- int ret;
-
- priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- platform_set_drvdata(pdev, priv);
- ar40xx_priv = priv;
-
- switch_node = of_node_get(pdev->dev.of_node);
- if (of_address_to_resource(switch_node, 0, &switch_base) != 0)
- return -EIO;
-
- priv->hw_addr = devm_ioremap_resource(&pdev->dev, &switch_base);
- if (IS_ERR(priv->hw_addr)) {
- dev_err(&pdev->dev, "Failed to ioremap switch_base!\n");
- return PTR_ERR(priv->hw_addr);
- }
-
- /*psgmii dts get*/
- psgmii_node = of_find_node_by_name(NULL, "ess-psgmii");
- if (!psgmii_node) {
- dev_err(&pdev->dev, "Failed to find ess-psgmii node!\n");
- return -EINVAL;
- }
-
- if (of_address_to_resource(psgmii_node, 0, &psgmii_base) != 0)
- return -EIO;
-
- priv->psgmii_hw_addr = devm_ioremap_resource(&pdev->dev, &psgmii_base);
- if (IS_ERR(priv->psgmii_hw_addr)) {
- dev_err(&pdev->dev, "psgmii ioremap fail!\n");
- return PTR_ERR(priv->psgmii_hw_addr);
- }
-
- mac_mode = of_get_property(switch_node, "switch_mac_mode", &len);
- if (!mac_mode) {
- dev_err(&pdev->dev, "Failed to read switch_mac_mode\n");
- return -EINVAL;
- }
- priv->mac_mode = be32_to_cpup(mac_mode);
-
- ess_clk = of_clk_get_by_name(switch_node, "ess_clk");
- if (ess_clk)
- clk_prepare_enable(ess_clk);
-
- priv->ess_rst = devm_reset_control_get(&pdev->dev, "ess_rst");
- if (IS_ERR(priv->ess_rst)) {
- dev_err(&pdev->dev, "Failed to get ess_rst control!\n");
- return PTR_ERR(priv->ess_rst);
- }
-
- if (of_property_read_u32(switch_node, "switch_cpu_bmp",
- &priv->cpu_bmp) ||
- of_property_read_u32(switch_node, "switch_lan_bmp",
- &priv->lan_bmp) ||
- of_property_read_u32(switch_node, "switch_wan_bmp",
- &priv->wan_bmp)) {
- dev_err(&pdev->dev, "Failed to read port properties\n");
- return -EIO;
- }
-
- mutex_init(&priv->reg_mutex);
- mutex_init(&priv->mib_lock);
- INIT_DELAYED_WORK(&priv->mib_work, ar40xx_mib_work_func);
-
- /* register switch */
- swdev = &priv->dev;
-
- mdio_node = of_find_compatible_node(NULL, NULL, "qcom,ipq4019-mdio");
- if (!mdio_node) {
- dev_err(&pdev->dev, "Probe failed - Cannot find mdio node by phandle!\n");
- ret = -ENODEV;
- goto err_missing_phy;
- }
-
- priv->mii_bus = of_mdio_find_bus(mdio_node);
-
- if (priv->mii_bus == NULL) {
- dev_err(&pdev->dev, "Probe failed - Missing PHYs!\n");
- ret = -ENODEV;
- goto err_missing_phy;
- }
-
- swdev->alias = dev_name(&priv->mii_bus->dev);
-
- swdev->cpu_port = AR40XX_PORT_CPU;
- swdev->name = "QCA AR40xx";
- swdev->vlans = AR40XX_MAX_VLANS;
- swdev->ports = AR40XX_NUM_PORTS;
- swdev->ops = &ar40xx_sw_ops;
- ret = register_switch(swdev, NULL);
- if (ret < 0) {
- dev_err(&pdev->dev, "Switch registration failed!\n");
- return ret;
- }
-
- num_mibs = ARRAY_SIZE(ar40xx_mibs);
- len = priv->dev.ports * num_mibs *
- sizeof(*priv->mib_stats);
- priv->mib_stats = devm_kzalloc(&pdev->dev, len, GFP_KERNEL);
- if (!priv->mib_stats) {
- ret = -ENOMEM;
- goto err_unregister_switch;
- }
-
- ar40xx_start(priv);
-
- return 0;
-
-err_unregister_switch:
- unregister_switch(&priv->dev);
-err_missing_phy:
- platform_set_drvdata(pdev, NULL);
- return ret;
-}
-
-static int ar40xx_remove(struct platform_device *pdev)
-{
- struct ar40xx_priv *priv = platform_get_drvdata(pdev);
-
- cancel_delayed_work_sync(&priv->qm_dwork);
- cancel_delayed_work_sync(&priv->mib_work);
-
- unregister_switch(&priv->dev);
-
- return 0;
-}
-
-static const struct of_device_id ar40xx_of_mtable[] = {
- {.compatible = "qcom,ess-switch" },
- {}
-};
-
-struct platform_driver ar40xx_drv = {
- .probe = ar40xx_probe,
- .remove = ar40xx_remove,
- .driver = {
- .name = "ar40xx",
- .of_match_table = ar40xx_of_mtable,
- },
-};
-
-module_platform_driver(ar40xx_drv);
-
-MODULE_DESCRIPTION("IPQ40XX ESS driver");
-MODULE_LICENSE("Dual BSD/GPL");
--- a/target/linux/ipq40xx/files-5.10/drivers/net/mdio/ar40xx.h
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * Copyright (c) 2016, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for
- * any purpose with or without fee is hereby granted, provided that the
- * above copyright notice and this permission notice appear in all copies.
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
- * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
- #ifndef __AR40XX_H
-#define __AR40XX_H
-
-#define AR40XX_MAX_VLANS 128
-#define AR40XX_NUM_PORTS 6
-#define AR40XX_NUM_PHYS 5
-
-#define BITS(_s, _n) (((1UL << (_n)) - 1) << _s)
-
-struct ar40xx_priv {
- struct switch_dev dev;
-
- u8 __iomem *hw_addr;
- u8 __iomem *psgmii_hw_addr;
- u32 mac_mode;
- struct reset_control *ess_rst;
- u32 cpu_bmp;
- u32 lan_bmp;
- u32 wan_bmp;
-
- struct mii_bus *mii_bus;
- struct phy_device *phy;
-
- /* mutex for qm task */
- struct mutex qm_lock;
- struct delayed_work qm_dwork;
- u32 port_link_up[AR40XX_NUM_PORTS];
- u32 ar40xx_port_old_link[AR40XX_NUM_PORTS];
- u32 ar40xx_port_qm_buf[AR40XX_NUM_PORTS];
-
- u32 phy_t_status;
-
- /* mutex for switch reg access */
- struct mutex reg_mutex;
-
- /* mutex for mib task */
- struct mutex mib_lock;
- struct delayed_work mib_work;
- int mib_next_port;
- u64 *mib_stats;
-
- char buf[2048];
-
- /* all fields below will be cleared on reset */
- bool vlan;
- u16 vlan_id[AR40XX_MAX_VLANS];
- u8 vlan_table[AR40XX_MAX_VLANS];
- u8 vlan_tagged;
- u16 pvid[AR40XX_NUM_PORTS];
-
- /* mirror */
- bool mirror_rx;
- bool mirror_tx;
- int source_port;
- int monitor_port;
-};
-
-#define AR40XX_PORT_LINK_UP 1
-#define AR40XX_PORT_LINK_DOWN 0
-#define AR40XX_QM_NOT_EMPTY 1
-#define AR40XX_QM_EMPTY 0
-
-#define AR40XX_LAN_VLAN 1
-#define AR40XX_WAN_VLAN 2
-
-enum ar40xx_port_wrapper_cfg {
- PORT_WRAPPER_PSGMII = 0,
-};
-
-struct ar40xx_mib_desc {
- u32 size;
- u32 offset;
- const char *name;
-};
-
-#define AR40XX_PORT_CPU 0
-
-#define AR40XX_PSGMII_MODE_CONTROL 0x1b4
-#define AR40XX_PSGMII_ATHR_CSCO_MODE_25M BIT(0)
-
-#define AR40XX_PSGMIIPHY_TX_CONTROL 0x288
-
-#define AR40XX_MII_ATH_MMD_ADDR 0x0d
-#define AR40XX_MII_ATH_MMD_DATA 0x0e
-#define AR40XX_MII_ATH_DBG_ADDR 0x1d
-#define AR40XX_MII_ATH_DBG_DATA 0x1e
-
-#define AR40XX_STATS_RXBROAD 0x00
-#define AR40XX_STATS_RXPAUSE 0x04
-#define AR40XX_STATS_RXMULTI 0x08
-#define AR40XX_STATS_RXFCSERR 0x0c
-#define AR40XX_STATS_RXALIGNERR 0x10
-#define AR40XX_STATS_RXRUNT 0x14
-#define AR40XX_STATS_RXFRAGMENT 0x18
-#define AR40XX_STATS_RX64BYTE 0x1c
-#define AR40XX_STATS_RX128BYTE 0x20
-#define AR40XX_STATS_RX256BYTE 0x24
-#define AR40XX_STATS_RX512BYTE 0x28
-#define AR40XX_STATS_RX1024BYTE 0x2c
-#define AR40XX_STATS_RX1518BYTE 0x30
-#define AR40XX_STATS_RXMAXBYTE 0x34
-#define AR40XX_STATS_RXTOOLONG 0x38
-#define AR40XX_STATS_RXGOODBYTE 0x3c
-#define AR40XX_STATS_RXBADBYTE 0x44
-#define AR40XX_STATS_RXOVERFLOW 0x4c
-#define AR40XX_STATS_FILTERED 0x50
-#define AR40XX_STATS_TXBROAD 0x54
-#define AR40XX_STATS_TXPAUSE 0x58
-#define AR40XX_STATS_TXMULTI 0x5c
-#define AR40XX_STATS_TXUNDERRUN 0x60
-#define AR40XX_STATS_TX64BYTE 0x64
-#define AR40XX_STATS_TX128BYTE 0x68
-#define AR40XX_STATS_TX256BYTE 0x6c
-#define AR40XX_STATS_TX512BYTE 0x70
-#define AR40XX_STATS_TX1024BYTE 0x74
-#define AR40XX_STATS_TX1518BYTE 0x78
-#define AR40XX_STATS_TXMAXBYTE 0x7c
-#define AR40XX_STATS_TXOVERSIZE 0x80
-#define AR40XX_STATS_TXBYTE 0x84
-#define AR40XX_STATS_TXCOLLISION 0x8c
-#define AR40XX_STATS_TXABORTCOL 0x90
-#define AR40XX_STATS_TXMULTICOL 0x94
-#define AR40XX_STATS_TXSINGLECOL 0x98
-#define AR40XX_STATS_TXEXCDEFER 0x9c
-#define AR40XX_STATS_TXDEFER 0xa0
-#define AR40XX_STATS_TXLATECOL 0xa4
-
-#define AR40XX_REG_MODULE_EN 0x030
-#define AR40XX_MODULE_EN_MIB BIT(0)
-
-#define AR40XX_REG_MIB_FUNC 0x034
-#define AR40XX_MIB_BUSY BIT(17)
-#define AR40XX_MIB_CPU_KEEP BIT(20)
-#define AR40XX_MIB_FUNC BITS(24, 3)
-#define AR40XX_MIB_FUNC_S 24
-#define AR40XX_MIB_FUNC_NO_OP 0x0
-#define AR40XX_MIB_FUNC_FLUSH 0x1
-
-#define AR40XX_ESS_SERVICE_TAG 0x48
-#define AR40XX_ESS_SERVICE_TAG_STAG BIT(17)
-
-#define AR40XX_REG_PORT_STATUS(_i) (0x07c + (_i) * 4)
-#define AR40XX_PORT_SPEED BITS(0, 2)
-#define AR40XX_PORT_STATUS_SPEED_S 0
-#define AR40XX_PORT_TX_EN BIT(2)
-#define AR40XX_PORT_RX_EN BIT(3)
-#define AR40XX_PORT_STATUS_TXFLOW BIT(4)
-#define AR40XX_PORT_STATUS_RXFLOW BIT(5)
-#define AR40XX_PORT_DUPLEX BIT(6)
-#define AR40XX_PORT_TXHALF_FLOW BIT(7)
-#define AR40XX_PORT_STATUS_LINK_UP BIT(8)
-#define AR40XX_PORT_AUTO_LINK_EN BIT(9)
-#define AR40XX_PORT_STATUS_FLOW_CONTROL BIT(12)
-
-#define AR40XX_REG_MAX_FRAME_SIZE 0x078
-#define AR40XX_MAX_FRAME_SIZE_MTU BITS(0, 14)
-
-#define AR40XX_REG_PORT_HEADER(_i) (0x09c + (_i) * 4)
-
-#define AR40XX_REG_EEE_CTRL 0x100
-#define AR40XX_EEE_CTRL_DISABLE_PHY(_i) BIT(4 + (_i) * 2)
-
-#define AR40XX_REG_PORT_VLAN0(_i) (0x420 + (_i) * 0x8)
-#define AR40XX_PORT_VLAN0_DEF_SVID BITS(0, 12)
-#define AR40XX_PORT_VLAN0_DEF_SVID_S 0
-#define AR40XX_PORT_VLAN0_DEF_CVID BITS(16, 12)
-#define AR40XX_PORT_VLAN0_DEF_CVID_S 16
-
-#define AR40XX_REG_PORT_VLAN1(_i) (0x424 + (_i) * 0x8)
-#define AR40XX_PORT_VLAN1_CORE_PORT BIT(9)
-#define AR40XX_PORT_VLAN1_PORT_TLS_MODE BIT(7)
-#define AR40XX_PORT_VLAN1_PORT_VLAN_PROP BIT(6)
-#define AR40XX_PORT_VLAN1_OUT_MODE BITS(12, 2)
-#define AR40XX_PORT_VLAN1_OUT_MODE_S 12
-#define AR40XX_PORT_VLAN1_OUT_MODE_UNMOD 0
-#define AR40XX_PORT_VLAN1_OUT_MODE_UNTAG 1
-#define AR40XX_PORT_VLAN1_OUT_MODE_TAG 2
-#define AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH 3
-
-#define AR40XX_REG_VTU_FUNC0 0x0610
-#define AR40XX_VTU_FUNC0_EG_MODE BITS(4, 14)
-#define AR40XX_VTU_FUNC0_EG_MODE_S(_i) (4 + (_i) * 2)
-#define AR40XX_VTU_FUNC0_EG_MODE_KEEP 0
-#define AR40XX_VTU_FUNC0_EG_MODE_UNTAG 1
-#define AR40XX_VTU_FUNC0_EG_MODE_TAG 2
-#define AR40XX_VTU_FUNC0_EG_MODE_NOT 3
-#define AR40XX_VTU_FUNC0_IVL BIT(19)
-#define AR40XX_VTU_FUNC0_VALID BIT(20)
-
-#define AR40XX_REG_VTU_FUNC1 0x0614
-#define AR40XX_VTU_FUNC1_OP BITS(0, 3)
-#define AR40XX_VTU_FUNC1_OP_NOOP 0
-#define AR40XX_VTU_FUNC1_OP_FLUSH 1
-#define AR40XX_VTU_FUNC1_OP_LOAD 2
-#define AR40XX_VTU_FUNC1_OP_PURGE 3
-#define AR40XX_VTU_FUNC1_OP_REMOVE_PORT 4
-#define AR40XX_VTU_FUNC1_OP_GET_NEXT 5
-#define AR40XX7_VTU_FUNC1_OP_GET_ONE 6
-#define AR40XX_VTU_FUNC1_FULL BIT(4)
-#define AR40XX_VTU_FUNC1_PORT BIT(8, 4)
-#define AR40XX_VTU_FUNC1_PORT_S 8
-#define AR40XX_VTU_FUNC1_VID BIT(16, 12)
-#define AR40XX_VTU_FUNC1_VID_S 16
-#define AR40XX_VTU_FUNC1_BUSY BIT(31)
-
-#define AR40XX_REG_FWD_CTRL0 0x620
-#define AR40XX_FWD_CTRL0_CPU_PORT_EN BIT(10)
-#define AR40XX_FWD_CTRL0_MIRROR_PORT BITS(4, 4)
-#define AR40XX_FWD_CTRL0_MIRROR_PORT_S 4
-
-#define AR40XX_REG_FWD_CTRL1 0x624
-#define AR40XX_FWD_CTRL1_UC_FLOOD BITS(0, 7)
-#define AR40XX_FWD_CTRL1_UC_FLOOD_S 0
-#define AR40XX_FWD_CTRL1_MC_FLOOD BITS(8, 7)
-#define AR40XX_FWD_CTRL1_MC_FLOOD_S 8
-#define AR40XX_FWD_CTRL1_BC_FLOOD BITS(16, 7)
-#define AR40XX_FWD_CTRL1_BC_FLOOD_S 16
-#define AR40XX_FWD_CTRL1_IGMP BITS(24, 7)
-#define AR40XX_FWD_CTRL1_IGMP_S 24
-
-#define AR40XX_REG_PORT_LOOKUP(_i) (0x660 + (_i) * 0xc)
-#define AR40XX_PORT_LOOKUP_MEMBER BITS(0, 7)
-#define AR40XX_PORT_LOOKUP_IN_MODE BITS(8, 2)
-#define AR40XX_PORT_LOOKUP_IN_MODE_S 8
-#define AR40XX_PORT_LOOKUP_STATE BITS(16, 3)
-#define AR40XX_PORT_LOOKUP_STATE_S 16
-#define AR40XX_PORT_LOOKUP_LEARN BIT(20)
-#define AR40XX_PORT_LOOKUP_LOOPBACK BIT(21)
-#define AR40XX_PORT_LOOKUP_ING_MIRROR_EN BIT(25)
-
-#define AR40XX_REG_ATU_FUNC 0x60c
-#define AR40XX_ATU_FUNC_OP BITS(0, 4)
-#define AR40XX_ATU_FUNC_OP_NOOP 0x0
-#define AR40XX_ATU_FUNC_OP_FLUSH 0x1
-#define AR40XX_ATU_FUNC_OP_LOAD 0x2
-#define AR40XX_ATU_FUNC_OP_PURGE 0x3
-#define AR40XX_ATU_FUNC_OP_FLUSH_LOCKED 0x4
-#define AR40XX_ATU_FUNC_OP_FLUSH_UNICAST 0x5
-#define AR40XX_ATU_FUNC_OP_GET_NEXT 0x6
-#define AR40XX_ATU_FUNC_OP_SEARCH_MAC 0x7
-#define AR40XX_ATU_FUNC_OP_CHANGE_TRUNK 0x8
-#define AR40XX_ATU_FUNC_BUSY BIT(31)
-
-#define AR40XX_REG_QM_DEBUG_ADDR 0x820
-#define AR40XX_REG_QM_DEBUG_VALUE 0x824
-#define AR40XX_REG_QM_PORT0_3_QNUM 0x1d
-#define AR40XX_REG_QM_PORT4_6_QNUM 0x1e
-
-#define AR40XX_REG_PORT_HOL_CTRL1(_i) (0x974 + (_i) * 0x8)
-#define AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN BIT(16)
-
-#define AR40XX_REG_PORT_FLOWCTRL_THRESH(_i) (0x9b0 + (_i) * 0x4)
-#define AR40XX_PORT0_FC_THRESH_ON_DFLT 0x60
-#define AR40XX_PORT0_FC_THRESH_OFF_DFLT 0x90
-
-#define AR40XX_PHY_DEBUG_0 0
-#define AR40XX_PHY_MANU_CTRL_EN BIT(12)
-
-#define AR40XX_PHY_DEBUG_2 2
-
-#define AR40XX_PHY_SPEC_STATUS 0x11
-#define AR40XX_PHY_SPEC_STATUS_LINK BIT(10)
-#define AR40XX_PHY_SPEC_STATUS_DUPLEX BIT(13)
-#define AR40XX_PHY_SPEC_STATUS_SPEED BITS(14, 2)
-
-/* port forwarding state */
-enum {
- AR40XX_PORT_STATE_DISABLED = 0,
- AR40XX_PORT_STATE_BLOCK = 1,
- AR40XX_PORT_STATE_LISTEN = 2,
- AR40XX_PORT_STATE_LEARN = 3,
- AR40XX_PORT_STATE_FORWARD = 4
-};
-
-/* ingress 802.1q mode */
-enum {
- AR40XX_IN_PORT_ONLY = 0,
- AR40XX_IN_PORT_FALLBACK = 1,
- AR40XX_IN_VLAN_ONLY = 2,
- AR40XX_IN_SECURE = 3
-};
-
-/* egress 802.1q mode */
-enum {
- AR40XX_OUT_KEEP = 0,
- AR40XX_OUT_STRIP_VLAN = 1,
- AR40XX_OUT_ADD_VLAN = 2
-};
-
-/* port speed */
-enum {
- AR40XX_PORT_SPEED_10M = 0,
- AR40XX_PORT_SPEED_100M = 1,
- AR40XX_PORT_SPEED_1000M = 2,
- AR40XX_PORT_SPEED_ERR = 3,
-};
-
-#define AR40XX_MIB_WORK_DELAY 2000 /* msecs */
-
-#define AR40XX_QM_WORK_DELAY 100
-
-#define AR40XX_MIB_FUNC_CAPTURE 0x3
-
-#define AR40XX_REG_PORT_STATS_START 0x1000
-#define AR40XX_REG_PORT_STATS_LEN 0x100
-
-#define AR40XX_PORTS_ALL 0x3f
-
-#define AR40XX_PSGMII_ID 5
-#define AR40XX_PSGMII_CALB_NUM 100
-#define AR40XX_MALIBU_PSGMII_MODE_CTRL 0x6d
-#define AR40XX_MALIBU_PHY_PSGMII_MODE_CTRL_ADJUST_VAL 0x220c
-#define AR40XX_MALIBU_PHY_MMD7_DAC_CTRL 0x801a
-#define AR40XX_MALIBU_DAC_CTRL_MASK 0x380
-#define AR40XX_MALIBU_DAC_CTRL_VALUE 0x280
-#define AR40XX_MALIBU_PHY_RLP_CTRL 0x805a
-#define AR40XX_PSGMII_TX_DRIVER_1_CTRL 0xb
-#define AR40XX_MALIBU_PHY_PSGMII_REDUCE_SERDES_TX_AMP 0x8a
-#define AR40XX_MALIBU_PHY_LAST_ADDR 4
-
-static inline struct ar40xx_priv *
-swdev_to_ar40xx(struct switch_dev *swdev)
-{
- return container_of(swdev, struct ar40xx_priv, dev);
-}
-
-#endif
-
--- a/target/linux/ipq40xx/patches-5.10/702-dts-ipq4019-add-PHY-switch-nodes.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 9deeec35dd3b628b95624e41d4e04acf728991ba Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 20 Nov 2016 02:20:54 +0100
-Subject: [PATCH] dts: ipq4019: add PHY/switch nodes
-
-This patch adds both the "qcom,ess-switch" and "qcom,ess-psgmii"
-nodes which are needed for the ar40xx.c driver to initialize the
-switch.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 23 +++++++++++++++++++++++
- 1 file changed, 23 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -617,6 +617,29 @@
- };
- };
-
-+ ess-switch@c000000 {
-+ compatible = "qcom,ess-switch";
-+ reg = <0xc000000 0x80000>;
-+ switch_access_mode = "local bus";
-+ resets = <&gcc ESS_RESET>;
-+ reset-names = "ess_rst";
-+ clocks = <&gcc GCC_ESS_CLK>;
-+ clock-names = "ess_clk";
-+ switch_cpu_bmp = <0x1>;
-+ switch_lan_bmp = <0x1e>;
-+ switch_wan_bmp = <0x20>;
-+ switch_mac_mode = <0>; /* PORT_WRAPPER_PSGMII */
-+ switch_initvlas = <0x7c 0x54>;
-+ status = "disabled";
-+ };
-+
-+ ess-psgmii@98000 {
-+ compatible = "qcom,ess-psgmii";
-+ reg = <0x98000 0x800>;
-+ psgmii_access_mode = "local bus";
-+ status = "disabled";
-+ };
-+
- usb3_ss_phy: ssphy@9a000 {
- compatible = "qcom,usb-ss-ipq4019-phy";
- #phy-cells = <0>;
--- a/target/linux/ipq40xx/patches-5.10/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 7c129254adb1093d10a62ed7bf7b956fcc6ffe34 Mon Sep 17 00:00:00 2001
-From: Rakesh Nair <ranair@codeaurora.org>
-Date: Wed, 20 Jul 2016 15:02:01 +0530
-Subject: [PATCH] net: IPQ4019 needs rfs/vlan_tag callbacks in
- netdev_ops
-
-Add callback support to get default vlan tag and register
-receive flow steering filter.
-
-Used by IPQ4019 ess-edma driver.
-
-BUG=chrome-os-partner:33096
-TEST=none
-
-Change-Id: I266070e4a0fbe4a0d9966fe79a71e50ec4f26c75
-Signed-off-by: Rakesh Nair <ranair@codeaurora.org>
-Reviewed-on: https://chromium-review.googlesource.com/362203
-Commit-Ready: Grant Grundler <grundler@chromium.org>
-Tested-by: Grant Grundler <grundler@chromium.org>
-Reviewed-by: Grant Grundler <grundler@chromium.org>
----
- include/linux/netdevice.h | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -779,6 +779,16 @@ struct xps_map {
- #define XPS_MIN_MAP_ALLOC ((L1_CACHE_ALIGN(offsetof(struct xps_map, queues[1])) \
- - sizeof(struct xps_map)) / sizeof(u16))
-
-+#ifdef CONFIG_RFS_ACCEL
-+typedef int (*set_rfs_filter_callback_t)(struct net_device *dev,
-+ __be32 src,
-+ __be32 dst,
-+ __be16 sport,
-+ __be16 dport,
-+ u8 proto,
-+ u16 rxq_index,
-+ u32 action);
-+#endif
- /*
- * This structure holds all XPS maps for device. Maps are indexed by CPU.
- */
-@@ -1466,6 +1476,9 @@ struct net_device_ops {
- const struct sk_buff *skb,
- u16 rxq_index,
- u32 flow_id);
-+ int (*ndo_register_rfs_filter)(struct net_device *dev,
-+ set_rfs_filter_callback_t set_filter);
-+ int (*ndo_get_default_vlan_tag)(struct net_device *net);
- #endif
- int (*ndo_add_slave)(struct net_device *dev,
- struct net_device *slave_dev,
--- a/target/linux/ipq40xx/patches-5.10/705-net-add-qualcomm-ar40xx-phy.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/net/mdio/Kconfig
-+++ b/drivers/net/mdio/Kconfig
-@@ -27,6 +27,13 @@ config OF_MDIO
- help
- OpenFirmware MDIO bus (Ethernet PHY) accessors
-
-+config AR40XX_PHY
-+ tristate "Driver for Qualcomm Atheros IPQ40XX switches"
-+ depends on HAS_IOMEM && OF && OF_MDIO
-+ select SWCONFIG
-+ help
-+ This is the driver for Qualcomm Atheros IPQ40XX ESS switches.
-+
- if MDIO_BUS
-
- config MDIO_DEVRES
---- a/drivers/net/mdio/Makefile
-+++ b/drivers/net/mdio/Makefile
-@@ -21,6 +21,8 @@ obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.
- obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o
- obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o
-
-+obj-$(CONFIG_AR40XX_PHY) += ar40xx.o
-+
- obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
- obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC) += mdio-mux-bcm-iproc.o
- obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o
--- a/target/linux/ipq40xx/patches-5.10/710-net-add-qualcomm-essedma-ethernet-driver.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 12e9319da1adacac92930c899c99f0e1970cac11 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@googlemail.com>
-Date: Thu, 19 Jan 2017 02:01:31 +0100
-Subject: [PATCH 33/38] NET: add qualcomm essedma ethernet driver
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- drivers/net/ethernet/qualcomm/Kconfig | 9 +++++++++
- drivers/net/ethernet/qualcomm/Makefile | 1 +
- 2 files changed, 10 insertions(+)
-
---- a/drivers/net/ethernet/qualcomm/Kconfig
-+++ b/drivers/net/ethernet/qualcomm/Kconfig
-@@ -62,4 +62,14 @@ config QCOM_EMAC
-
- source "drivers/net/ethernet/qualcomm/rmnet/Kconfig"
-
-+config ESSEDMA
-+ tristate "Qualcomm Atheros ESS Edma support"
-+ depends on OF_MDIO
-+ help
-+ This driver supports ethernet edma adapter.
-+ Say Y to build this driver.
-+
-+ To compile this driver as a module, choose M here. The module
-+ will be called essedma.ko.
-+
- endif # NET_VENDOR_QUALCOMM
---- a/drivers/net/ethernet/qualcomm/Makefile
-+++ b/drivers/net/ethernet/qualcomm/Makefile
-@@ -10,5 +10,6 @@ obj-$(CONFIG_QCA7000_UART) += qcauart.o
- qcauart-objs := qca_uart.o
-
- obj-y += emac/
-+obj-$(CONFIG_ESSEDMA) += essedma/
-
- obj-$(CONFIG_RMNET) += rmnet/
--- a/target/linux/ipq40xx/patches-5.10/711-dts-ipq4019-add-ethernet-essedma-node.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From c611d3780fa101662a822d10acf8feb04ca97409 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 20 Nov 2016 01:01:10 +0100
-Subject: [PATCH] dts: ipq4019: add ethernet essedma node
-
-This patch adds the device-tree node for the ethernet
-interfaces.
-
-Note: The driver isn't anywhere close to be upstream,
-so the info might change.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 60 +++++++++++++++++++++++++++++++++++++
- 1 file changed, 60 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -39,6 +39,8 @@
- spi1 = &blsp1_spi2;
- i2c0 = &blsp1_i2c3;
- i2c1 = &blsp1_i2c4;
-+ ethernet0 = &gmac0;
-+ ethernet1 = &gmac1;
- };
-
- cpus {
-@@ -658,6 +660,64 @@
- status = "disabled";
- };
-
-+ edma@c080000 {
-+ compatible = "qcom,ess-edma";
-+ reg = <0xc080000 0x8000>;
-+ qcom,page-mode = <0>;
-+ qcom,rx_head_buf_size = <1540>;
-+ qcom,mdio_supported;
-+ qcom,poll_required = <1>;
-+ qcom,num_gmac = <2>;
-+ interrupts = <0 65 IRQ_TYPE_EDGE_RISING
-+ 0 66 IRQ_TYPE_EDGE_RISING
-+ 0 67 IRQ_TYPE_EDGE_RISING
-+ 0 68 IRQ_TYPE_EDGE_RISING
-+ 0 69 IRQ_TYPE_EDGE_RISING
-+ 0 70 IRQ_TYPE_EDGE_RISING
-+ 0 71 IRQ_TYPE_EDGE_RISING
-+ 0 72 IRQ_TYPE_EDGE_RISING
-+ 0 73 IRQ_TYPE_EDGE_RISING
-+ 0 74 IRQ_TYPE_EDGE_RISING
-+ 0 75 IRQ_TYPE_EDGE_RISING
-+ 0 76 IRQ_TYPE_EDGE_RISING
-+ 0 77 IRQ_TYPE_EDGE_RISING
-+ 0 78 IRQ_TYPE_EDGE_RISING
-+ 0 79 IRQ_TYPE_EDGE_RISING
-+ 0 80 IRQ_TYPE_EDGE_RISING
-+ 0 240 IRQ_TYPE_EDGE_RISING
-+ 0 241 IRQ_TYPE_EDGE_RISING
-+ 0 242 IRQ_TYPE_EDGE_RISING
-+ 0 243 IRQ_TYPE_EDGE_RISING
-+ 0 244 IRQ_TYPE_EDGE_RISING
-+ 0 245 IRQ_TYPE_EDGE_RISING
-+ 0 246 IRQ_TYPE_EDGE_RISING
-+ 0 247 IRQ_TYPE_EDGE_RISING
-+ 0 248 IRQ_TYPE_EDGE_RISING
-+ 0 249 IRQ_TYPE_EDGE_RISING
-+ 0 250 IRQ_TYPE_EDGE_RISING
-+ 0 251 IRQ_TYPE_EDGE_RISING
-+ 0 252 IRQ_TYPE_EDGE_RISING
-+ 0 253 IRQ_TYPE_EDGE_RISING
-+ 0 254 IRQ_TYPE_EDGE_RISING
-+ 0 255 IRQ_TYPE_EDGE_RISING>;
-+
-+ status = "disabled";
-+
-+ gmac0: gmac0 {
-+ local-mac-address = [00 00 00 00 00 00];
-+ vlan_tag = <1 0x1f>;
-+ };
-+
-+ gmac1: gmac1 {
-+ local-mac-address = [00 00 00 00 00 00];
-+ qcom,phy_mdio_addr = <4>;
-+ qcom,poll_required = <1>;
-+ qcom,forced_speed = <1000>;
-+ qcom,forced_duplex = <1>;
-+ vlan_tag = <2 0x20>;
-+ };
-+ };
-+
- usb3_ss_phy: ssphy@9a000 {
- compatible = "qcom,usb-ss-ipq4019-phy";
- #phy-cells = <0>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts
@@ -21,10 +21,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts
@@ -62,14 +58,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts
@@ -174,22 +162,6 @@
status = "okay";
};
-&gmac0 {
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x10>;
-};
-
&usb2_hs_phy {
status = "okay";
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
@@ -65,10 +65,6 @@
pinctrl-names = "default";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
@@ -118,17 +114,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
-
- switch_lan_bmp = <0x10>;
- switch_wan_bmp = <0x20>;
- };
-
- edma@c080000 {
- status = "okay";
- };
};
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
@@ -277,22 +262,6 @@
#gpio-cells = <2>;
};
-&gmac0 {
- qcom,forced_duplex = <1>;
- qcom,forced_speed = <1000>;
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- vlan_tag = <1 0x10>;
-};
-
-&gmac1 {
- qcom,forced_duplex = <1>;
- qcom,forced_speed = <1000>;
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- vlan_tag = <2 0x20>;
-};
-
&tlmm {
i2c0_pins: i2c0_pinmux {
mux_i2c {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cap-ac.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cap-ac.dts
@@ -61,16 +61,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- qcom,poll_required = <0>;
- qcom,num_gmac = <1>;
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cap-ac.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cap-ac.dts
@@ -222,10 +212,6 @@
status = "okay";
};
-&gmac0 {
- vlan_tag = <0 0x3f>;
-};
-
&ethphy3 {
gpio-controller;
#gpio-cells = <2>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts
@@ -29,10 +29,6 @@
reset-delay-us = <5000>;
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts
@@ -64,14 +60,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
};
leds {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts
@@ -264,13 +252,3 @@
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
};
-
-&gmac0 {
- nvmem-cell-names = "mac-address";
- nvmem-cells = <&macaddr_art_6>;
-};
-
-&gmac1 {
- nvmem-cell-names = "mac-address";
- nvmem-cells = <&macaddr_art_0>;
-};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts
@@ -17,11 +17,6 @@
};
soc {
- edma@c080000 {
- qcom,num_gmac = <1>;
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts
@@ -51,16 +46,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- switch_lan_bmp = <0x20>;
- switch_wan_bmp = <0x00>;
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
};
leds {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts
@@ -192,14 +177,6 @@
status = "okay";
};
-&gmac0 {
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x20>;
-};
-
&mdio {
status = "okay";
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts
@@ -25,10 +25,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts
@@ -68,14 +64,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts
@@ -18,10 +18,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts
@@ -47,14 +43,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts
@@ -227,14 +215,6 @@
status = "okay";
};
-&gmac0 {
- vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
- vlan_tag = <1 0x10>;
-};
-
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts
@@ -14,7 +14,6 @@
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
- label-mac-device = &gmac0;
};
chosen {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts
@@ -57,10 +56,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts
@@ -110,17 +105,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
-
- switch_lan_bmp = <0x10>;
- switch_wan_bmp = <0x20>;
- };
-
- edma@c080000 {
- status = "okay";
- };
};
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts
@@ -303,18 +287,6 @@
pinctrl-names = "default";
};
-&gmac0 {
- qcom,poll_required = <1>;
- qcom,phy_mdio_addr = <4>;
- vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
- qcom,poll_required = <1>;
- qcom,phy_mdio_addr = <3>;
- vlan_tag = <1 0x10>;
-};
-
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts
@@ -25,10 +25,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts
@@ -54,17 +50,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- switch_lan_bmp = <0x20>;
- switch_wan_bmp = <0x00>;
- };
-
- edma@c080000 {
- status = "okay";
- qcom,num_gmac = <1>;
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts
@@ -210,14 +195,6 @@
status = "okay";
};
-&gmac0 {
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x20>;
-};
-
&cryptobam {
status = "okay";
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts
@@ -18,10 +18,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts
@@ -51,14 +47,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts
@@ -212,14 +200,6 @@
status = "okay";
};
-&gmac0 {
- vlan_tag = <1 0x10>;
-};
-
-&gmac1 {
- vlan_tag = <2 0x20>;
-};
-
&usb2_hs_phy {
status = "okay";
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts
@@ -26,14 +26,6 @@
status = "okay";
};
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts
@@ -60,14 +52,6 @@
status = "okay";
};
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
-
/*
* Disable the broken restart as a workaround for the buggy
* 3.0.0/3.0.1 U-boots that ship with the device.
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
@@ -33,10 +33,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
@@ -62,15 +58,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- qcom,num_gmac = <1>;
- };
};
aliases {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
@@ -78,7 +65,6 @@
led-failsafe = &power_amber;
led-running = &power_green;
led-upgrade = &power_amber;
- label-mac-device = &gmac0;
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts
@@ -14,7 +14,6 @@
led-failsafe = &flash;
led-running = &power;
led-upgrade = &flash;
- label-mac-device = &gmac0;
};
soc {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts
@@ -26,10 +25,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts
@@ -69,14 +64,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-gl-ap1300.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-gl-ap1300.dts
@@ -34,10 +34,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-gl-ap1300.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-gl-ap1300.dts
@@ -79,16 +75,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- switch_lan_bmp = <0x18>;
- switch_wan_bmp = <0x20>;
- };
-
- edma@c080000 {
- status = "okay";
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts
@@ -78,14 +78,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
@@ -19,10 +19,6 @@
pinctrl-names = "default";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
@@ -69,16 +65,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
-
- switch_lan_bmp = <0x10>; /* lan port bitmap */
- };
-
- edma@c080000 {
- status = "okay";
- };
};
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
@@ -241,20 +227,6 @@
status = "okay";
};
-&gmac0 {
- qcom,poll_required = <1>;
- qcom,poll_required_dynamic = <1>;
- qcom,phy_mdio_addr = <3>;
- vlan_tag = <1 0x10>;
-};
-
-&gmac1 {
- qcom,poll_required = <1>;
- qcom,poll_required_dynamic = <1>;
- qcom,phy_mdio_addr = <4>;
- vlan_tag = <2 0x20>;
-};
-
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts
@@ -29,10 +29,6 @@
/delete-node/ ethernet-phy@1;
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
crypto@8e3a000 {
status = "okay";
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts
@@ -41,42 +37,6 @@
status = "okay";
};
- ess-switch@c000000 {
- status = "okay";
- switch_lan_bmp = <0x3e>;
- switch_wan_bmp = <0x0>;
- };
-
- edma@c080000 {
- status = "okay";
- qcom,num_gmac = <3>;
-
- gmac0 {
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- /delete-property/ qcom,forced_speed;
- /delete-property/ qcom,forced_duplex;
- vlan_tag = <1 0x10>;
- };
-
- gmac1 {
- qcom,phy_mdio_addr = <2>;
- qcom,poll_required = <1>;
- /delete-property/ qcom,forced_speed;
- /delete-property/ qcom,forced_duplex;
- vlan_tag = <1 0x08>;
- };
-
- gmac2 {
- local-mac-address = [00 00 00 00 00 00];
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- /delete-property/ qcom,forced_speed;
- /delete-property/ qcom,forced_duplex;
- vlan_tag = <1 0x20>;
- };
- };
-
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
@@ -35,10 +35,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
@@ -103,14 +99,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts
@@ -21,10 +21,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts
@@ -62,14 +58,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts
@@ -166,22 +154,6 @@
status = "okay";
};
-&gmac0 {
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x10>;
-};
-
&usb2_hs_phy {
status = "okay";
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
@@ -30,10 +30,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
@@ -84,14 +80,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi
@@ -6,10 +6,6 @@
#include <dt-bindings/input/input.h>
/ {
- aliases {
- label-mac-device = &gmac0;
- };
-
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts
@@ -65,17 +65,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- phy-mode = "rgmii";
- qcom,num_gmac = <1>;
- qcom,single-phy;
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts
@@ -228,14 +217,6 @@
qcom,ath10k-calibration-variant = "MikroTik-SXTsq-5-ac";
};
-&gmac0 {
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x20>;
-};
-
&mdio {
status = "okay";
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts
@@ -16,7 +16,6 @@
led-failsafe = &led_power_amber;
led-running = &led_power_green;
led-upgrade = &led_power_amber;
- label-mac-device = &gmac0;
};
chosen {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts
@@ -28,10 +27,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts
@@ -62,14 +57,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts
@@ -358,14 +345,6 @@
reset-delay-us = <2000>;
};
-&gmac0 {
- qcom,forced_duplex = <1>;
- qcom,forced_speed = <1000>;
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- vlan_tag = <1 0x10>;
-};
-
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration", "mac-address";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts
@@ -44,10 +44,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts
@@ -73,15 +69,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- qcom,num_gmac = <1>;
- };
};
leds {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts
@@ -53,10 +53,6 @@
/delete-node/ ethernet-phy@3;
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts
@@ -96,17 +92,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
-
- switch_lan_bmp = <0x1e>;
- switch_wan_bmp = <0x20>;
- };
-
- edma@c080000 {
- status = "okay";
- };
};
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts
@@ -224,16 +209,6 @@
status = "okay";
};
-&gmac0 {
- qcom,phy_mdio_addr = <2>;
- qcom,poll_required = <1>;
-};
-
-&gmac1 {
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
-};
-
&tlmm {
serial0_pins: serial0_pinmux {
mux {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts
@@ -21,10 +21,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts
@@ -62,17 +58,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- switch_lan_bmp = <0x10>;
- switch_wan_bmp = <0x20>;
-
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts
@@ -184,14 +169,6 @@
status = "okay";
};
-&gmac0 {
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x10>;
-};
-
&usb2_hs_phy {
status = "okay";
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts
@@ -29,10 +29,6 @@
reset-delay-us = <1000>;
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts
@@ -97,14 +93,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
};
led_spi {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts
@@ -196,16 +184,6 @@
status = "okay";
};
-&gmac0 {
- nvmem-cells = <&macaddr_art_1006>;
- nvmem-cell-names = "mac-address";
-};
-
-&gmac1 {
- nvmem-cells = <&macaddr_art_5006>;
- nvmem-cell-names = "mac-address";
-};
-
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi
@@ -30,10 +30,6 @@
pinctrl-names = "default";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi
@@ -120,14 +116,6 @@
status = "okay";
};
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
-
leds {
compatible = "gpio-leds";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts
@@ -76,10 +76,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
crypto@8e3a000 {
status = "okay";
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts
@@ -87,15 +83,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- switch_lan_bmp = <0x10>;
- };
-
- edma@c080000 {
- status = "okay";
- };
};
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts
@@ -189,10 +176,6 @@
status = "okay";
};
-&gmac0 {
- vlan_tag = <1 0x10>;
-};
-
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts
@@ -25,10 +25,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts
@@ -64,15 +60,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- qcom,num_gmac = <1>;
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
@@ -59,19 +59,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
- switch_lan_bmp = <0x0>; /* lan port bitmap */
- switch_wan_bmp = <0x10>; /* wan port bitmap */
- };
-
- edma@c080000 {
- status = "okay";
- phy-mode = "rgmii-id";
- qcom,num_gmac = <1>;
- qcom,single-phy;
- };
};
key {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
@@ -265,9 +252,3 @@
status = "okay";
qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
};
-
-&gmac0 {
- qcom,phy_mdio_addr = <0>;
- qcom,poll_required = <1>;
- vlan_tag = <0 0x20>;
-};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts
@@ -25,10 +25,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts
@@ -54,18 +50,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
-
- switch_lan_bmp = <0x30>;
- switch_wan_bmp = <0x02>;
- };
-
- edma@c080000 {
- status = "okay";
- qcom,num_gmac = <1>;
- };
};
key {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts
@@ -210,10 +194,6 @@
};
};
-&gmac0 {
- vlan_tag = <1 0x30>;
-};
-
&cryptobam {
status = "okay";
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts
@@ -27,10 +27,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts
@@ -60,16 +56,6 @@
crypto@8e3a000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- switch_lan_bmp = <0x2e>;
- switch_wan_bmp = <0x10>;
- };
-
- edma@c080000 {
- status = "okay";
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts
@@ -113,18 +99,6 @@
};
};
-&gmac1 {
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <2 0x10>;
-};
-
-&gmac0 {
- vlan_tag = <1 0x2e>;
-};
-
&vqmmc {
status = "okay";
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
@@ -29,10 +29,6 @@
pinctrl-names = "default";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
@@ -79,14 +75,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-hap-ac3.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-hap-ac3.dts
@@ -73,14 +73,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts
@@ -85,19 +85,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
- switch_lan_bmp = <0x0>; /* lan port bitmap */
- switch_wan_bmp = <0x10>; /* wan port bitmap */
- };
-
- edma@c080000 {
- status = "okay";
- phy-mode = "rgmii-id";
- qcom,num_gmac = <1>;
- qcom,single-phy;
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts
@@ -260,9 +247,3 @@
};
};
};
-
-&gmac0 {
- qcom,phy_mdio_addr = <0>;
- qcom,poll_required = <1>;
- vlan_tag = <0 0x20>;
-};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts
@@ -26,10 +26,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts
@@ -59,14 +55,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mf286d.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mf286d.dts
@@ -130,14 +130,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
};
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mf286d.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mf286d.dts
@@ -225,17 +217,6 @@
status = "okay";
};
-&gmac0 {
- nvmem-cell-names = "mac-address";
- nvmem-cells = <&macaddr_config_0>;
-};
-
-&gmac1 {
- nvmem-cell-names = "mac-address";
- nvmem-cells = <&macaddr_config_0>;
- mac-address-increment = <1>;
-};
-
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts
@@ -27,10 +27,6 @@
pinctrl-names = "default";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts
@@ -97,17 +93,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- switch_mac_mode = <0x0>; /* mac mode for RGMII RMII */
- switch_initvlas = <0x0007c 0x54>; /* port0 status */
- switch_lan_bmp = <0x10>;
- };
-
- edma@c080000 {
- status = "okay";
- };
};
key {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-orbi.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-orbi.dtsi
@@ -25,10 +25,6 @@
pinctrl-names = "default";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-orbi.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-orbi.dtsi
@@ -67,17 +63,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
-
- switch_lan_bmp = <0x1c>;
- switch_wan_bmp = <0x02>;
- };
-
- edma@c080000 {
- status = "okay";
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-orbi.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-orbi.dtsi
@@ -281,15 +266,6 @@
status = "okay";
};
-&gmac0 {
- vlan_tag = <1 0x1c>;
-};
-
-&gmac1 {
- qcom,phy_mdio_addr = <0>;
- vlan_tag = <2 0x02>;
-};
-
&pcie0 {
status = "okay";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-pa2200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-pa2200.dts
@@ -21,10 +21,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-pa2200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-pa2200.dts
@@ -50,17 +46,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- switch_lan_bmp = <0x10>;
- switch_wan_bmp = <0x20>;
-
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-pa2200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-pa2200.dts
@@ -169,14 +154,6 @@
status = "okay";
};
-&gmac0 {
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x10>;
-};
-
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi
@@ -16,7 +16,6 @@
led-failsafe = &led_sys;
led-running = &led_sys;
led-upgrade = &led_sys;
- label-mac-device = &gmac0;
};
soc {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi
@@ -30,10 +29,6 @@
pinctrl-names = "default";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi
@@ -73,14 +68,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
};
leds {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts
@@ -142,10 +142,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts
@@ -187,14 +183,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
};
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi
@@ -21,10 +21,6 @@
reset-delay-us = <2000>;
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi
@@ -87,14 +83,6 @@
status = "okay";
};
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
-
aliases {
led-boot = &led_status;
led-failsafe = &led_status;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
@@ -253,10 +253,6 @@
reset-delay-us = <5000>;
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
@@ -333,16 +329,6 @@
status = "okay";
};
- ess-switch@c000000 {
- switch_lan_bmp = <0x1e>;
- switch_wan_bmp = <0x20>;
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
-
qpic_bam: dma@7984000 {
status = "okay";
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
@@ -371,22 +357,6 @@
status = "okay";
};
-&gmac0 {
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x10>;
-};
-
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts
@@ -32,7 +32,6 @@
led-failsafe = &led_power_orange;
led-running = &led_power_white;
led-upgrade = &led_power_blue;
- label-mac-device = &gmac0;
};
soc {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts
@@ -73,19 +72,6 @@
status = "okay";
};
- ess-switch@c000000 {
- status = "okay";
- switch_lan_bmp = <0x1c>;
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
-
usb3@8af8800 {
status = "okay";
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts
@@ -438,16 +424,6 @@
reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
};
-&gmac0 {
- nvmem-cells = <&macaddr_orgdata_20>;
- nvmem-cell-names = "mac-address";
-};
-
-&gmac1 {
- nvmem-cells = <&macaddr_orgdata_20>;
- nvmem-cell-names = "mac-address";
-};
-
&usb3_ss_phy {
status = "okay";
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-x1pro.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-x1pro.dts
@@ -87,17 +87,3 @@
};
};
};
-
-&gmac0 {
- status = "okay";
-
- mtd-mac-address = <&art 0x5006>;
- mtd-mac-address-increment = <2>;
-};
-
-&gmac1 {
- status = "okay";
-
- mtd-mac-address = <&art 0x5006>;
- mtd-mac-address-increment = <3>;
-};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-x1pro.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-x1pro.dtsi
@@ -30,10 +30,6 @@
reset-delay-us = <2000>;
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-x1pro.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-x1pro.dtsi
@@ -96,14 +92,6 @@
status = "okay";
};
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
-
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi
@@ -35,10 +35,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi
@@ -103,14 +99,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
};
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
@@ -38,10 +38,6 @@
reset-delay-us = <2000>;
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
@@ -83,17 +79,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- switch_lan_bmp = <0x10>;
- switch_wan_bmp = <0x20>;
-
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
@@ -262,22 +247,6 @@
status = "okay";
};
-&gmac0 {
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x10>;
-};
-
&usb3_ss_phy {
status = "okay";
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts
@@ -76,14 +76,6 @@
status = "okay";
};
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
-
i2c_0: i2c@78b7000 {
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
@@ -64,19 +64,6 @@
status = "okay";
};
- ess-switch@c000000 {
- switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
- switch_lan_bmp = <0x0>; /* lan port bitmap */
- switch_wan_bmp = <0x10>; /* wan port bitmap */
- };
-
- edma@c080000 {
- qcom,single-phy;
- qcom,num_gmac = <1>;
- phy-mode = "rgmii-id";
- status = "okay";
- };
-
i2c_0: i2c@78b7000 {
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
@@ -123,12 +110,6 @@
status = "okay";
};
-&gmac0 {
- qcom,phy_mdio_addr = <5>;
- qcom,poll_required = <1>;
- vlan_tag = <0 0x20>;
-};
-
&qpic_bam {
status = "okay";
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
@@ -44,10 +44,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
@@ -89,16 +85,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- switch_lan_bmp = <0x18>;
- switch_wan_bmp = <0x20>;
- };
-
- edma@c080000 {
- status = "okay";
- };
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts
@@ -30,10 +30,6 @@
status = "okay";
};
- ess-psgmii@98000 {
- status = "okay";
- };
-
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts
@@ -75,16 +71,6 @@
watchdog@b017000 {
status = "okay";
};
-
- ess-switch@c000000 {
- status = "okay";
- switch_lan_bmp = <0x18>;
- switch_wan_bmp = <0x20>;
- };
-
- edma@c080000 {
- status = "okay";
- };
};
keys {
--- a/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
+++ b/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
@@ -64,6 +64,8 @@
#define QCA807X_CHIP_CONFIGURATION 0x1f
#define QCA807X_BT_BX_REG_SEL BIT(15)
+#define QCA807X_BT_BX_REG_SEL_FIBER 0
+#define QCA807X_BT_BX_REG_SEL_COPPER 1
#define QCA807X_CHIP_CONFIGURATION_MODE_CFG_MASK GENMASK(3, 0)
#define QCA807X_CHIP_CONFIGURATION_MODE_QSGMII_SGMII 4
#define QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_FIBER 3
--- a/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
+++ b/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
@@ -400,19 +402,9 @@ static int qca807x_gpio(struct phy_device *phydev)
}
#endif
-static int qca807x_read_copper_status(struct phy_device *phydev, bool combo_port)
+static int qca807x_read_copper_status(struct phy_device *phydev)
{
- int ss, err, page, old_link = phydev->link;
-
- /* Only combo port has dual pages */
- if (combo_port) {
- /* Check whether copper page is set and set if needed */
- page = phy_read(phydev, QCA807X_CHIP_CONFIGURATION);
- if (!(page & QCA807X_BT_BX_REG_SEL)) {
- page |= QCA807X_BT_BX_REG_SEL;
- phy_write(phydev, QCA807X_CHIP_CONFIGURATION, page);
- }
- }
+ int ss, err, old_link = phydev->link;
/* Update the link, but return if there was an error */
err = genphy_update_link(phydev);
--- a/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
+++ b/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
@@ -487,16 +479,9 @@ static int qca807x_read_copper_status(struct phy_device *phydev, bool combo_port
return 0;
}
-static int qca807x_read_fiber_status(struct phy_device *phydev, bool combo_port)
+static int qca807x_read_fiber_status(struct phy_device *phydev)
{
- int ss, err, page, lpa, old_link = phydev->link;
-
- /* Check whether fiber page is set and set if needed */
- page = phy_read(phydev, QCA807X_CHIP_CONFIGURATION);
- if (page & QCA807X_BT_BX_REG_SEL) {
- page &= ~QCA807X_BT_BX_REG_SEL;
- phy_write(phydev, QCA807X_CHIP_CONFIGURATION, page);
- }
+ int ss, err, lpa, old_link = phydev->link;
/* Update the link, but return if there was an error */
err = genphy_update_link(phydev);
--- a/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
+++ b/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
@@ -559,28 +544,17 @@ static int qca807x_read_fiber_status(struct phy_device *phydev, bool combo_port)
static int qca807x_read_status(struct phy_device *phydev)
{
- int val;
-
- /* Check for Combo port */
- if (phy_read(phydev, QCA807X_CHIP_CONFIGURATION)) {
- /* Check for fiber mode first */
- if (linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported)) {
- /* Check for actual detected media */
- val = phy_read(phydev, QCA807X_MEDIA_SELECT_STATUS);
- if (val & QCA807X_MEDIA_DETECTED_COPPER) {
- qca807x_read_copper_status(phydev, true);
- } else if ((val & QCA807X_MEDIA_DETECTED_1000_BASE_X) ||
- (val & QCA807X_MEDIA_DETECTED_100_BASE_FX)) {
- qca807x_read_fiber_status(phydev, true);
- }
- } else {
- qca807x_read_copper_status(phydev, true);
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported)) {
+ switch (phydev->port) {
+ case PORT_FIBRE:
+ return qca807x_read_fiber_status(phydev);
+ case PORT_TP:
+ return qca807x_read_copper_status(phydev);
+ default:
+ return -EINVAL;
}
- } else {
- qca807x_read_copper_status(phydev, false);
- }
-
- return 0;
+ } else
+ return qca807x_read_copper_status(phydev);
}
static int qca807x_config_intr(struct phy_device *phydev)
--- a/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
+++ b/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
@@ -683,9 +657,63 @@ static int qca807x_led_config(struct phy_device *phydev)
return 0;
}
+static int qca807x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
+{
+ struct phy_device *phydev = upstream;
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
+ phy_interface_t iface;
+ int ret;
+
+ sfp_parse_support(phydev->sfp_bus, id, support);
+ iface = sfp_select_interface(phydev->sfp_bus, support);
+
+ dev_info(&phydev->mdio.dev, "%s SFP module inserted\n", phy_modes(iface));
+
+ switch (iface) {
+ case PHY_INTERFACE_MODE_1000BASEX:
+ case PHY_INTERFACE_MODE_100BASEX:
+ /* Set PHY mode to PSGMII combo (1/4 copper + combo ports) mode */
+ ret = phy_modify(phydev,
+ QCA807X_CHIP_CONFIGURATION,
+ QCA807X_CHIP_CONFIGURATION_MODE_CFG_MASK,
+ QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_FIBER);
+ /* Enable fiber mode autodection (1000Base-X or 100Base-FX) */
+ ret = phy_set_bits_mmd(phydev,
+ MDIO_MMD_AN,
+ QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION,
+ QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION_EN);
+ /* Select fiber page */
+ ret = phy_clear_bits(phydev,
+ QCA807X_CHIP_CONFIGURATION,
+ QCA807X_BT_BX_REG_SEL);
+
+ phydev->port = PORT_FIBRE;
+ break;
+ default:
+ dev_err(&phydev->mdio.dev, "Incompatible SFP module inserted\n");
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static void qca807x_sfp_remove(void *upstream)
+{
+ struct phy_device *phydev = upstream;
+
+ /* Select copper page */
+ phy_set_bits(phydev,
+ QCA807X_CHIP_CONFIGURATION,
+ QCA807X_BT_BX_REG_SEL);
+
+ phydev->port = PORT_TP;
+}
+
static const struct sfp_upstream_ops qca807x_sfp_ops = {
.attach = phy_sfp_attach,
.detach = phy_sfp_detach,
+ .module_insert = qca807x_sfp_insert,
+ .module_remove = qca807x_sfp_remove,
};
static int qca807x_config(struct phy_device *phydev)
--- a/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
+++ b/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
@@ -696,28 +724,7 @@ static int qca807x_config(struct phy_device *phydev)
/* Check for Combo port */
if (phy_read(phydev, QCA807X_CHIP_CONFIGURATION)) {
- int fiber_mode_autodect;
int psgmii_serdes;
- int chip_config;
-
- if (of_property_read_bool(node, "qcom,fiber-enable")) {
- /* Enable fiber mode autodection (1000Base-X or 100Base-FX) */
- fiber_mode_autodect = phy_read_mmd(phydev, MDIO_MMD_AN,
- QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION);
- fiber_mode_autodect |= QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION_EN;
- phy_write_mmd(phydev, MDIO_MMD_AN, QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION,
- fiber_mode_autodect);
-
- /* Enable 4 copper + combo port mode */
- chip_config = phy_read(phydev, QCA807X_CHIP_CONFIGURATION);
- chip_config &= ~QCA807X_CHIP_CONFIGURATION_MODE_CFG_MASK;
- chip_config |= FIELD_PREP(QCA807X_CHIP_CONFIGURATION_MODE_CFG_MASK,
- QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_FIBER);
- phy_write(phydev, QCA807X_CHIP_CONFIGURATION, chip_config);
-
- linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported);
- linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->advertising);
- }
/* Prevent PSGMII going into hibernation via PSGMII self test */
psgmii_serdes = phy_read_mmd(phydev, MDIO_MMD_PCS, PSGMII_MMD3_SERDES_CONTROL);
--- a/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
+++ b/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
@@ -761,9 +768,10 @@ static int qca807x_probe(struct phy_device *phydev)
}
/* Attach SFP bus on combo port*/
- if (of_property_read_bool(node, "qcom,fiber-enable")) {
- if (phy_read(phydev, QCA807X_CHIP_CONFIGURATION))
- ret = phy_sfp_probe(phydev, &qca807x_sfp_ops);
+ if (phy_read(phydev, QCA807X_CHIP_CONFIGURATION)) {
+ ret = phy_sfp_probe(phydev, &qca807x_sfp_ops);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->advertising);
}
return ret;
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts
@@ -24,9 +24,6 @@
pinctrl-names = "default";
reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
reset-delay-us = <2000>;
-
- /delete-node/ ethernet-phy@0;
- /delete-node/ ethernet-phy@1;
};
crypto@8e3a000 {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts
@@ -152,6 +149,14 @@
status = "okay";
};
+&ethphy0 {
+ status = "disabled";
+};
+
+&ethphy1 {
+ status = "disabled";
+};
+
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "devolo,magic-2-wifi-next";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts
@@ -47,10 +47,6 @@
mdio@90000 {
status = "okay";
-
- /delete-node/ ethernet-phy@0;
- /delete-node/ ethernet-phy@1;
- /delete-node/ ethernet-phy@3;
};
tcsr@1949000 {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts
@@ -248,6 +244,18 @@
status = "okay";
};
+&ethphy0 {
+ status = "disabled";
+};
+
+&ethphy1 {
+ status = "disabled";
+};
+
+&ethphy3 {
+ status = "disabled";
+};
+
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
@@ -26,12 +26,6 @@
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
-
- /delete-node/ ethernet-phy@1;
- /delete-node/ ethernet-phy@2;
- /delete-node/ ethernet-phy@3;
- /delete-node/ ethernet-phy@4;
- /delete-node/ psgmii-phy@5;
};
tcsr@1949000 {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
@@ -243,6 +237,30 @@
status = "okay";
};
+&ethphy0 {
+ status = "disabled";
+};
+
+&ethphy1 {
+ status = "disabled";
+};
+
+&ethphy2 {
+ status = "disabled";
+};
+
+&ethphy3 {
+ status = "disabled";
+};
+
+&ethphy4 {
+ status = "disabled";
+};
+
+&psgmiiphy {
+ status = "disabled";
+};
+
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts
@@ -47,12 +47,6 @@
mdio@90000 {
status = "okay";
-
- /delete-node/ ethernet-phy@1;
- /delete-node/ ethernet-phy@2;
- /delete-node/ ethernet-phy@3;
- /delete-node/ ethernet-phy@4;
- /delete-node/ psgmii-phy@5;
};
counter@4a1000 {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts
@@ -247,3 +241,23 @@
};
};
};
+
+&ethphy1 {
+ status = "disabled";
+};
+
+&ethphy2 {
+ status = "disabled";
+};
+
+&ethphy3 {
+ status = "disabled";
+};
+
+&ethphy4 {
+ status = "disabled";
+};
+
+&psgmiiphy {
+ status = "disabled";
+};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
@@ -21,13 +21,6 @@
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
- /delete-node/ ethernet-phy@0;
- /delete-node/ ethernet-phy@1;
- /delete-node/ ethernet-phy@2;
- /delete-node/ ethernet-phy@3;
- /delete-node/ ethernet-phy@4;
- /delete-node/ psgmii-phy@5;
-
ethernet-phy@5 {
reg = <0x5>;
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
@@ -221,6 +214,30 @@
};
};
+&ethphy0 {
+ status = "disabled";
+};
+
+&ethphy1 {
+ status = "disabled";
+};
+
+&ethphy2 {
+ status = "disabled";
+};
+
+&ethphy3 {
+ status = "disabled";
+};
+
+&ethphy4 {
+ status = "disabled";
+};
+
+&psgmiiphy {
+ status = "disabled";
+};
+
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration", "mac-address";
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.10/700-skbuff-add-DSA-specific-data-to-struct-skb_shared_in.patch
@@ -0,0 +1,43 @@
+From da75807ac41175e9db8c95f7a172b4133763b744 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <j4g8y7@gmail.com>
+Date: Mon, 11 Jan 2021 17:49:36 +0100
+Subject: [PATCH] skbuff: add DSA specific data to struct skb_shared_info
+
+All of the already existing DSA tagging protocol drivers
+are storing the tagging data directly into the skb. In most
+cases that is the only way to send the required information
+to the underlying ethernet switch.
+
+However on certain platforms (like the Qualcomm IPQ40xx
+SoCs) the built-in ethernet switch is connected directly
+to an ethernet MAC, and the tagging information must be
+sent out-of-band which is done directly via the hardware
+TX descriptors of the ethernet MAC.
+
+In such cases, putting the information into the skb causes
+unneccesary overhead, because the ethernet driver must
+remove that before sending the ethernet frame towards to
+the hardware.
+
+This change adds two new DSA specific fields to struct
+skb_shared_info which makes it possible to send the
+tagging information via skb->shinfo. With this approach,
+the twofold modifications of the skb data can be avoided.
+
+Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
+---
+ include/linux/skbuff.h | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -522,6 +522,9 @@ struct skb_shared_info {
+ unsigned int gso_type;
+ u32 tskey;
+
++ unsigned int dsa_tag_proto;
++ unsigned char dsa_tag_data[8];
++
+ /*
+ * Warning : all fields before dataref are cleared in __alloc_skb()
+ */
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.10/701-net-dsa-tag_ipq4019-add-shinfo-based-tagging-driver-.patch
@@ -0,0 +1,188 @@
+From 29a0c2fae991cab142575c92276c0afdeb260ebe Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <j4g8y7@gmail.com>
+Date: Thu, 28 Oct 2021 21:44:52 +0200
+Subject: [PATCH] net: dsa: tag_ipq4019: add shinfo based tagging driver for
+ IPQ40xx
+
+This change adds a tagging protocol driver for the built-in
+ethernet switch of the Qualcomm Atheros IPQ4019 SoCs.
+
+In comparison to the existing tagging protocols this hardware
+requires a slightly different approach because the switch does
+not use in-band tags.
+
+On the receive path, the source port information is embedded
+into the RX descriptors of the ethernet MAC hardware. Similarly,
+the destination port mask must be sent via the TX descriptors
+of the ethernet MAC when a packet is sent towards the switch.
+
+In order to support this special requirements, this patch
+adds a new tagging protocol driver.
+
+The driver extracts the source port information directly
+from the 'receive return descriptor' of the ethernet MAC.
+It is possible because that descriptor is part of the skb
+received from the ethernet driver.
+
+Unfortunatley, it is not possible to put the destination
+port information directly to the TX descriptors, because
+those are handled internally by the driver of the ethernet
+hardware.
+
+To overcome this limitation, this tagging driver uses the
+DSA specific fields in skb->shinfo to send the destination
+port information to the ethernet driver.
+
+A similar tagging driver is exist but that uses skb
+extensions which causes unnecessary overhead.
+
+Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
+---
+ include/linux/dsa/ipq4019.h | 11 ++++++
+ include/net/dsa.h | 2 +
+ net/dsa/Kconfig | 6 +++
+ net/dsa/Makefile | 1 +
+ net/dsa/tag_ipq4019.c | 79 +++++++++++++++++++++++++++++++++++++
+ 5 files changed, 99 insertions(+)
+ create mode 100644 include/linux/dsa/ipq4019.h
+ create mode 100644 net/dsa/tag_ipq4019.c
+
+--- /dev/null
++++ b/include/linux/dsa/ipq4019.h
+@@ -0,0 +1,11 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++#ifndef DSA_IPQ40XX_H
++#define DSA_IPQ40XX_H
++
++struct ipq40xx_dsa_tag_data {
++ u8 from_cpu;
++ u8 dp;
++};
++
++#endif /* DSA_IPQ40XX_H */
+--- a/include/net/dsa.h
++++ b/include/net/dsa.h
+@@ -46,6 +46,7 @@ struct phylink_link_state;
+ #define DSA_TAG_PROTO_AR9331_VALUE 16
+ #define DSA_TAG_PROTO_RTL4_A_VALUE 17
+ #define DSA_TAG_PROTO_BRCM_LEGACY_VALUE 22
++#define DSA_TAG_PROTO_IPQ4019_VALUE 24
+
+ enum dsa_tag_protocol {
+ DSA_TAG_PROTO_NONE = DSA_TAG_PROTO_NONE_VALUE,
+@@ -67,6 +68,7 @@ enum dsa_tag_protocol {
+ DSA_TAG_PROTO_OCELOT = DSA_TAG_PROTO_OCELOT_VALUE,
+ DSA_TAG_PROTO_AR9331 = DSA_TAG_PROTO_AR9331_VALUE,
+ DSA_TAG_PROTO_RTL4_A = DSA_TAG_PROTO_RTL4_A_VALUE,
++ DSA_TAG_PROTO_IPQ4019 = DSA_TAG_PROTO_IPQ4019_VALUE,
+ };
+
+ struct packet_type;
+--- a/net/dsa/Kconfig
++++ b/net/dsa/Kconfig
+@@ -63,6 +63,12 @@ config NET_DSA_TAG_BRCM_PREPEND
+ Broadcom switches which places the tag before the Ethernet header
+ (prepended).
+
++config NET_DSA_TAG_IPQ4019
++ tristate "Tag driver for Qualcomm Atheros IPQ4019 SoC built-in switch"
++ help
++ Say Y or M if you want to enable support for tagging frames for
++ the built-in switch of the Qualcomm Atheros IPQ4019 SoC-s.
++
+ config NET_DSA_TAG_GSWIP
+ tristate "Tag driver for Lantiq / Intel GSWIP switches"
+ help
+--- a/net/dsa/Makefile
++++ b/net/dsa/Makefile
+@@ -10,6 +10,7 @@ obj-$(CONFIG_NET_DSA_TAG_BRCM_COMMON) +=
+ obj-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa.o
+ obj-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
+ obj-$(CONFIG_NET_DSA_TAG_GSWIP) += tag_gswip.o
++obj-$(CONFIG_NET_DSA_TAG_IPQ4019) += tag_ipq4019.o
+ obj-$(CONFIG_NET_DSA_TAG_KSZ) += tag_ksz.o
+ obj-$(CONFIG_NET_DSA_TAG_RTL4_A) += tag_rtl4_a.o
+ obj-$(CONFIG_NET_DSA_TAG_LAN9303) += tag_lan9303.o
+--- /dev/null
++++ b/net/dsa/tag_ipq4019.c
+@@ -0,0 +1,79 @@
++// SPDX-License-Identifier: GPL-2.0-only
++
++/* Copyright (c) 2021, Gabor Juhos <j4g8y7@gmail.com> */
++
++#include <linux/bitfield.h>
++#include <linux/dsa/ipq4019.h>
++
++#include "dsa_priv.h"
++
++/* Receive Return Descriptor */
++struct edma_rrd {
++ u16 rrd0;
++ u16 rrd1;
++ u16 rrd2;
++ u16 rrd3;
++ u16 rrd4;
++ u16 rrd5;
++ u16 rrd6;
++ u16 rrd7;
++} __packed;
++
++#define EDMA_RRD_SIZE sizeof(struct edma_rrd)
++
++#define EDMA_RRD1_PORT_ID_MASK GENMASK(14, 12)
++
++static struct sk_buff *ipq4019_sh_tag_xmit(struct sk_buff *skb,
++ struct net_device *dev)
++{
++ struct dsa_port *dp = dsa_slave_to_port(dev);
++ struct ipq40xx_dsa_tag_data *tag_data;
++
++ BUILD_BUG_ON(sizeof_field(struct skb_shared_info, dsa_tag_data) <
++ sizeof(struct ipq40xx_dsa_tag_data));
++
++ skb_shinfo(skb)->dsa_tag_proto = DSA_TAG_PROTO_IPQ4019;
++ tag_data = (struct ipq40xx_dsa_tag_data *)skb_shinfo(skb)->dsa_tag_data;
++
++ tag_data->from_cpu = 1;
++ /* set the destination port information */
++ tag_data->dp = BIT(dp->index);
++
++ return skb;
++}
++
++static struct sk_buff *ipq4019_sh_tag_rcv(struct sk_buff *skb,
++ struct net_device *dev,
++ struct packet_type *pt)
++{
++ struct edma_rrd *rrd;
++ int offset;
++ int port;
++
++ offset = EDMA_RRD_SIZE + ETH_HLEN;
++ if (unlikely(skb_headroom(skb) < offset))
++ return NULL;
++
++ rrd = (struct edma_rrd *)(skb->data - offset);
++ port = FIELD_GET(EDMA_RRD1_PORT_ID_MASK, rrd->rrd1);
++
++ skb->dev = dsa_master_find_slave(dev, 0, port);
++ if (!skb->dev)
++ return NULL;
++
++ return skb;
++}
++
++const struct dsa_device_ops ipq4019_sh_tag_dsa_ops = {
++ .name = "ipq4019-sh",
++ .proto = DSA_TAG_PROTO_IPQ4019,
++ .xmit = ipq4019_sh_tag_xmit,
++ .rcv = ipq4019_sh_tag_rcv,
++};
++
++MODULE_LICENSE("GPL v2");
++MODULE_DESCRIPTION("DSA tag driver for the IPQ4019 SoC built-in ethernet switch");
++MODULE_AUTHOR("Gabor Juhos <j4g8y7@gmail.com>");
++MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_IPQ4019);
++
++module_dsa_tag_driver(ipq4019_sh_tag_dsa_ops);
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.15/700-skbuff-add-DSA-specific-data-to-struct-skb_shared_in.patch
@@ -0,0 +1,43 @@
+From da75807ac41175e9db8c95f7a172b4133763b744 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <j4g8y7@gmail.com>
+Date: Mon, 11 Jan 2021 17:49:36 +0100
+Subject: [PATCH] skbuff: add DSA specific data to struct skb_shared_info
+
+All of the already existing DSA tagging protocol drivers
+are storing the tagging data directly into the skb. In most
+cases that is the only way to send the required information
+to the underlying ethernet switch.
+
+However on certain platforms (like the Qualcomm IPQ40xx
+SoCs) the built-in ethernet switch is connected directly
+to an ethernet MAC, and the tagging information must be
+sent out-of-band which is done directly via the hardware
+TX descriptors of the ethernet MAC.
+
+In such cases, putting the information into the skb causes
+unneccesary overhead, because the ethernet driver must
+remove that before sending the ethernet frame towards to
+the hardware.
+
+This change adds two new DSA specific fields to struct
+skb_shared_info which makes it possible to send the
+tagging information via skb->shinfo. With this approach,
+the twofold modifications of the skb data can be avoided.
+
+Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
+---
+ include/linux/skbuff.h | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -528,6 +528,9 @@ struct skb_shared_info {
+ unsigned int gso_type;
+ u32 tskey;
+
++ unsigned int dsa_tag_proto;
++ unsigned char dsa_tag_data[8];
++
+ /*
+ * Warning : all fields before dataref are cleared in __alloc_skb()
+ */
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.15/701-net-dsa-tag_ipq4019-add-shinfo-based-tagging-driver-.patch
@@ -0,0 +1,187 @@
+From 29a0c2fae991cab142575c92276c0afdeb260ebe Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <j4g8y7@gmail.com>
+Date: Thu, 28 Oct 2021 21:44:52 +0200
+Subject: [PATCH] net: dsa: tag_ipq4019: add shinfo based tagging driver for
+ IPQ40xx
+
+This change adds a tagging protocol driver for the built-in
+ethernet switch of the Qualcomm Atheros IPQ4019 SoCs.
+
+In comparison to the existing tagging protocols this hardware
+requires a slightly different approach because the switch does
+not use in-band tags.
+
+On the receive path, the source port information is embedded
+into the RX descriptors of the ethernet MAC hardware. Similarly,
+the destination port mask must be sent via the TX descriptors
+of the ethernet MAC when a packet is sent towards the switch.
+
+In order to support this special requirements, this patch
+adds a new tagging protocol driver.
+
+The driver extracts the source port information directly
+from the 'receive return descriptor' of the ethernet MAC.
+It is possible because that descriptor is part of the skb
+received from the ethernet driver.
+
+Unfortunatley, it is not possible to put the destination
+port information directly to the TX descriptors, because
+those are handled internally by the driver of the ethernet
+hardware.
+
+To overcome this limitation, this tagging driver uses the
+DSA specific fields in skb->shinfo to send the destination
+port information to the ethernet driver.
+
+A similar tagging driver is exist but that uses skb
+extensions which causes unnecessary overhead.
+
+Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
+---
+ include/linux/dsa/ipq4019.h | 11 ++++++
+ include/net/dsa.h | 2 +
+ net/dsa/Kconfig | 6 +++
+ net/dsa/Makefile | 1 +
+ net/dsa/tag_ipq4019.c | 79 +++++++++++++++++++++++++++++++++++++
+ 5 files changed, 99 insertions(+)
+ create mode 100644 include/linux/dsa/ipq4019.h
+ create mode 100644 net/dsa/tag_ipq4019.c
+
+--- /dev/null
++++ b/include/linux/dsa/ipq4019.h
+@@ -0,0 +1,11 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++#ifndef DSA_IPQ40XX_H
++#define DSA_IPQ40XX_H
++
++struct ipq40xx_dsa_tag_data {
++ u8 from_cpu;
++ u8 dp;
++};
++
++#endif /* DSA_IPQ40XX_H */
+--- a/include/net/dsa.h
++++ b/include/net/dsa.h
+@@ -51,6 +51,7 @@ struct phylink_link_state;
+ #define DSA_TAG_PROTO_SEVILLE_VALUE 21
+ #define DSA_TAG_PROTO_BRCM_LEGACY_VALUE 22
+ #define DSA_TAG_PROTO_SJA1110_VALUE 23
++#define DSA_TAG_PROTO_IPQ4019_VALUE 24
+
+ enum dsa_tag_protocol {
+ DSA_TAG_PROTO_NONE = DSA_TAG_PROTO_NONE_VALUE,
+@@ -77,6 +78,7 @@ enum dsa_tag_protocol {
+ DSA_TAG_PROTO_OCELOT_8021Q = DSA_TAG_PROTO_OCELOT_8021Q_VALUE,
+ DSA_TAG_PROTO_SEVILLE = DSA_TAG_PROTO_SEVILLE_VALUE,
+ DSA_TAG_PROTO_SJA1110 = DSA_TAG_PROTO_SJA1110_VALUE,
++ DSA_TAG_PROTO_IPQ4019 = DSA_TAG_PROTO_IPQ4019_VALUE,
+ };
+
+ struct dsa_switch;
+--- a/net/dsa/Kconfig
++++ b/net/dsa/Kconfig
+@@ -57,6 +57,12 @@ config NET_DSA_TAG_HELLCREEK
+ Say Y or M if you want to enable support for tagging frames
+ for the Hirschmann Hellcreek TSN switches.
+
++config NET_DSA_TAG_IPQ4019
++ tristate "Tag driver for Qualcomm Atheros IPQ4019 SoC built-in switch"
++ help
++ Say Y or M if you want to enable support for tagging frames for
++ the built-in switch of the Qualcomm Atheros IPQ4019 SoC-s.
++
+ config NET_DSA_TAG_GSWIP
+ tristate "Tag driver for Lantiq / Intel GSWIP switches"
+ help
+--- a/net/dsa/Makefile
++++ b/net/dsa/Makefile
+@@ -8,6 +8,7 @@ obj-$(CONFIG_NET_DSA_TAG_AR9331) += tag_
+ obj-$(CONFIG_NET_DSA_TAG_BRCM_COMMON) += tag_brcm.o
+ obj-$(CONFIG_NET_DSA_TAG_DSA_COMMON) += tag_dsa.o
+ obj-$(CONFIG_NET_DSA_TAG_GSWIP) += tag_gswip.o
++obj-$(CONFIG_NET_DSA_TAG_IPQ4019) += tag_ipq4019.o
+ obj-$(CONFIG_NET_DSA_TAG_HELLCREEK) += tag_hellcreek.o
+ obj-$(CONFIG_NET_DSA_TAG_KSZ) += tag_ksz.o
+ obj-$(CONFIG_NET_DSA_TAG_RTL4_A) += tag_rtl4_a.o
+--- /dev/null
++++ b/net/dsa/tag_ipq4019.c
+@@ -0,0 +1,78 @@
++// SPDX-License-Identifier: GPL-2.0-only
++
++/* Copyright (c) 2021, Gabor Juhos <j4g8y7@gmail.com> */
++
++#include <linux/bitfield.h>
++#include <linux/dsa/ipq4019.h>
++
++#include "dsa_priv.h"
++
++/* Receive Return Descriptor */
++struct edma_rrd {
++ u16 rrd0;
++ u16 rrd1;
++ u16 rrd2;
++ u16 rrd3;
++ u16 rrd4;
++ u16 rrd5;
++ u16 rrd6;
++ u16 rrd7;
++} __packed;
++
++#define EDMA_RRD_SIZE sizeof(struct edma_rrd)
++
++#define EDMA_RRD1_PORT_ID_MASK GENMASK(14, 12)
++
++static struct sk_buff *ipq4019_sh_tag_xmit(struct sk_buff *skb,
++ struct net_device *dev)
++{
++ struct dsa_port *dp = dsa_slave_to_port(dev);
++ struct ipq40xx_dsa_tag_data *tag_data;
++
++ BUILD_BUG_ON(sizeof_field(struct skb_shared_info, dsa_tag_data) <
++ sizeof(struct ipq40xx_dsa_tag_data));
++
++ skb_shinfo(skb)->dsa_tag_proto = DSA_TAG_PROTO_IPQ4019;
++ tag_data = (struct ipq40xx_dsa_tag_data *)skb_shinfo(skb)->dsa_tag_data;
++
++ tag_data->from_cpu = 1;
++ /* set the destination port information */
++ tag_data->dp = BIT(dp->index);
++
++ return skb;
++}
++
++static struct sk_buff *ipq4019_sh_tag_rcv(struct sk_buff *skb,
++ struct net_device *dev)
++{
++ struct edma_rrd *rrd;
++ int offset;
++ int port;
++
++ offset = EDMA_RRD_SIZE + ETH_HLEN;
++ if (unlikely(skb_headroom(skb) < offset))
++ return NULL;
++
++ rrd = (struct edma_rrd *)(skb->data - offset);
++ port = FIELD_GET(EDMA_RRD1_PORT_ID_MASK, rrd->rrd1);
++
++ skb->dev = dsa_master_find_slave(dev, 0, port);
++ if (!skb->dev)
++ return NULL;
++
++ return skb;
++}
++
++const struct dsa_device_ops ipq4019_sh_tag_dsa_ops = {
++ .name = "ipq4019-sh",
++ .proto = DSA_TAG_PROTO_IPQ4019,
++ .xmit = ipq4019_sh_tag_xmit,
++ .rcv = ipq4019_sh_tag_rcv,
++};
++
++MODULE_LICENSE("GPL v2");
++MODULE_DESCRIPTION("DSA tag driver for the IPQ4019 SoC built-in ethernet switch");
++MODULE_AUTHOR("Gabor Juhos <j4g8y7@gmail.com>");
++MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_IPQ4019);
++
++module_dsa_tag_driver(ipq4019_sh_tag_dsa_ops);
--- a/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
+++ b/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
@@ -121,7 +121,7 @@
#define PSGMII_QSGMII_DRIVE_CONTROL_1 0xb
#define PSGMII_QSGMII_TX_DRIVER_MASK GENMASK(7, 4)
#define PSGMII_MODE_CTRL 0x6d
-#define PSGMII_MODE_CTRL_AZ_WORKAROUND_MASK GENMASK(3, 0)
+#define PSGMII_MODE_CTRL_AZ_WORKAROUND_MASK BIT(0)
#define PSGMII_MMD3_SERDES_CONTROL 0x805a
struct qca807x_gpio_priv {
--- a/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
+++ b/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
@@ -780,17 +780,14 @@ static int qca807x_probe(struct phy_device *phydev)
static int qca807x_psgmii_config(struct phy_device *phydev)
{
struct device_node *node = phydev->mdio.dev.of_node;
- int psgmii_az, tx_amp, ret = 0;
+ int tx_amp, ret = 0;
u32 tx_driver_strength;
/* Workaround to enable AZ transmitting ability */
- if (of_property_read_bool(node, "qcom,psgmii-az")) {
- psgmii_az = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, PSGMII_MODE_CTRL);
- psgmii_az &= ~PSGMII_MODE_CTRL_AZ_WORKAROUND_MASK;
- psgmii_az |= FIELD_PREP(PSGMII_MODE_CTRL_AZ_WORKAROUND_MASK, 0xc);
- ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, PSGMII_MODE_CTRL, psgmii_az);
- psgmii_az = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, PSGMII_MODE_CTRL);
- }
+ ret = phy_clear_bits_mmd(phydev,
+ MDIO_MMD_PMAPMD,
+ PSGMII_MODE_CTRL,
+ PSGMII_MODE_CTRL_AZ_WORKAROUND_MASK);
/* PSGMII/QSGMII TX amp set to DT defined value instead of default 600mV */
if (!of_property_read_u32(node, "qcom,tx-driver-strength", &tx_driver_strength)) {
--- a/target/linux/ipq40xx/patches-5.10/708-arm-dts-ipq4019-QCA807x-properties.patch
+++ b/target/linux/ipq40xx/patches-5.10/708-arm-dts-ipq4019-QCA807x-properties.patch
@@ -56,7 +56,6 @@ Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+ reg = <5>;
+
+ qcom,tx-driver-strength = <PSGMII_QSGMII_TX_DRIVER_300MV>;
-+ qcom,psgmii-az;
};
};
--- /dev/null
+++ b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/ipqess/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the IPQ ESS driver
+#
+
+obj-$(CONFIG_QCOM_IPQ4019_ESS_EDMA) += ipq_ess.o
+
+ipq_ess-objs := ipqess.o ipqess_ethtool.o
--- /dev/null
+++ b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/ipqess/ipqess.c
@@ -0,0 +1,1334 @@
+// SPDX-License-Identifier: (GPL-2.0 OR ISC)
+/* Copyright (c) 2014 - 2017, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2017 - 2018, John Crispin <john@phrozen.org>
+ * Copyright (c) 2018 - 2019, Christian Lamparter <chunkeey@gmail.com>
+ * Copyright (c) 2020 - 2021, Gabor Juhos <j4g8y7@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all copies.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/dsa/ipq4019.h>
+#include <linux/if_vlan.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/phylink.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/skbuff.h>
+#include <linux/vmalloc.h>
+#include <net/checksum.h>
+#include <net/dsa.h>
+#include <net/ip6_checksum.h>
+
+#include "ipqess.h"
+
+#define IPQESS_RRD_SIZE 16
+#define IPQESS_NEXT_IDX(X, Y) (((X) + 1) & ((Y) - 1))
+#define IPQESS_TX_DMA_BUF_LEN 0x3fff
+
+static void ipqess_w32(struct ipqess *ess, u32 reg, u32 val)
+{
+ writel(val, ess->hw_addr + reg);
+}
+
+static u32 ipqess_r32(struct ipqess *ess, u16 reg)
+{
+ return readl(ess->hw_addr + reg);
+}
+
+static void ipqess_m32(struct ipqess *ess, u32 mask, u32 val, u16 reg)
+{
+ u32 _val = ipqess_r32(ess, reg);
+ _val &= ~mask;
+ _val |= val;
+ ipqess_w32(ess, reg, _val);
+}
+
+void ipqess_update_hw_stats(struct ipqess *ess)
+{
+ uint32_t *p;
+ u32 stat;
+ int i;
+
+ lockdep_assert_held(&ess->stats_lock);
+
+ p = (uint32_t *)&(ess->ipqessstats);
+ for (i = 0; i < IPQESS_MAX_TX_QUEUE; i++) {
+ stat = ipqess_r32(ess, IPQESS_REG_TX_STAT_PKT_Q(i));
+ *p += stat;
+ p++;
+ }
+
+ for (i = 0; i < IPQESS_MAX_TX_QUEUE; i++) {
+ stat = ipqess_r32(ess, IPQESS_REG_TX_STAT_BYTE_Q(i));
+ *p += stat;
+ p++;
+ }
+
+ for (i = 0; i < IPQESS_MAX_RX_QUEUE; i++) {
+ stat = ipqess_r32(ess, IPQESS_REG_RX_STAT_PKT_Q(i));
+ *p += stat;
+ p++;
+ }
+
+ for (i = 0; i < IPQESS_MAX_RX_QUEUE; i++) {
+ stat = ipqess_r32(ess, IPQESS_REG_RX_STAT_BYTE_Q(i));
+ *p += stat;
+ p++;
+ }
+}
+
+static int ipqess_tx_ring_alloc(struct ipqess *ess)
+{
+ struct device *dev = &ess->pdev->dev;
+ int i;
+
+ for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) {
+ struct ipqess_tx_ring *tx_ring = &ess->tx_ring[i];
+ size_t size;
+ u32 idx;
+
+ tx_ring->ess = ess;
+ tx_ring->ring_id = i;
+ tx_ring->idx = i * 4;
+ tx_ring->count = IPQESS_TX_RING_SIZE;
+ tx_ring->nq = netdev_get_tx_queue(ess->netdev, i);
+
+ size = sizeof(struct ipqess_buf) * IPQESS_TX_RING_SIZE;
+ tx_ring->buf = devm_kzalloc(dev, size, GFP_KERNEL);
+ if (!tx_ring->buf) {
+ netdev_err(ess->netdev, "buffer alloc of tx ring failed");
+ return -ENOMEM;
+ }
+
+ size = sizeof(struct ipqess_tx_desc) * IPQESS_TX_RING_SIZE;
+ tx_ring->hw_desc = dmam_alloc_coherent(dev, size, &tx_ring->dma,
+ GFP_KERNEL | __GFP_ZERO);
+ if (!tx_ring->hw_desc) {
+ netdev_err(ess->netdev, "descriptor allocation for tx ring failed");
+ return -ENOMEM;
+ }
+
+ ipqess_w32(ess, IPQESS_REG_TPD_BASE_ADDR_Q(tx_ring->idx),
+ (u32)tx_ring->dma);
+
+ idx = ipqess_r32(ess, IPQESS_REG_TPD_IDX_Q(tx_ring->idx));
+ idx >>= IPQESS_TPD_CONS_IDX_SHIFT; /* need u32 here */
+ idx &= 0xffff;
+ tx_ring->head = tx_ring->tail = idx;
+
+ ipqess_m32(ess, IPQESS_TPD_PROD_IDX_MASK << IPQESS_TPD_PROD_IDX_SHIFT,
+ idx, IPQESS_REG_TPD_IDX_Q(tx_ring->idx));
+ ipqess_w32(ess, IPQESS_REG_TX_SW_CONS_IDX_Q(tx_ring->idx), idx);
+ ipqess_w32(ess, IPQESS_REG_TPD_RING_SIZE, IPQESS_TX_RING_SIZE);
+ }
+
+ return 0;
+}
+
+static int ipqess_tx_unmap_and_free(struct device *dev, struct ipqess_buf *buf)
+{
+ int len = 0;
+
+ if (buf->flags & IPQESS_DESC_SINGLE)
+ dma_unmap_single(dev, buf->dma, buf->length, DMA_TO_DEVICE);
+ else if (buf->flags & IPQESS_DESC_PAGE)
+ dma_unmap_page(dev, buf->dma, buf->length, DMA_TO_DEVICE);
+
+ if (buf->flags & IPQESS_DESC_LAST) {
+ len = buf->skb->len;
+ dev_kfree_skb_any(buf->skb);
+ }
+
+ buf->flags = 0;
+
+ return len;
+}
+
+static void ipqess_tx_ring_free(struct ipqess *ess)
+{
+ int i;
+
+ for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) {
+ int j;
+
+ if (ess->tx_ring[i].hw_desc)
+ continue;
+
+ for (j = 0; j < IPQESS_TX_RING_SIZE; j++) {
+ struct ipqess_buf *buf = &ess->tx_ring[i].buf[j];
+
+ ipqess_tx_unmap_and_free(&ess->pdev->dev, buf);
+ }
+
+ ess->tx_ring[i].buf = NULL;
+ }
+}
+
+static int ipqess_rx_buf_prepare(struct ipqess_buf *buf,
+ struct ipqess_rx_ring *rx_ring)
+{
+ /* Clean the HW DESC header, otherwise we might end up
+ * with a spurious desc because of random garbage */
+ memset(buf->skb->data, 0, sizeof(struct ipqess_rx_desc));
+
+ buf->dma = dma_map_single(rx_ring->ppdev, buf->skb->data,
+ IPQESS_RX_HEAD_BUFF_SIZE, DMA_FROM_DEVICE);
+ if (dma_mapping_error(rx_ring->ppdev, buf->dma)) {
+ dev_err_once(rx_ring->ppdev,
+ "IPQESS DMA mapping failed for linear address %x",
+ buf->dma);
+ dev_kfree_skb_any(buf->skb);
+ buf->skb = NULL;
+ return -EFAULT;
+ }
+
+ buf->length = IPQESS_RX_HEAD_BUFF_SIZE;
+ rx_ring->hw_desc[rx_ring->head] = (struct ipqess_rx_desc *)buf->dma;
+ rx_ring->head = (rx_ring->head + 1) % IPQESS_RX_RING_SIZE;
+
+ ipqess_m32(rx_ring->ess, IPQESS_RFD_PROD_IDX_BITS,
+ (rx_ring->head + IPQESS_RX_RING_SIZE - 1) % IPQESS_RX_RING_SIZE,
+ IPQESS_REG_RFD_IDX_Q(rx_ring->idx));
+
+ return 0;
+}
+
+/* locking is handled by the caller */
+static int ipqess_rx_buf_alloc_napi(struct ipqess_rx_ring *rx_ring)
+{
+ struct ipqess_buf *buf = &rx_ring->buf[rx_ring->head];
+
+ buf->skb = napi_alloc_skb(&rx_ring->napi_rx,
+ IPQESS_RX_HEAD_BUFF_SIZE);
+ if (!buf->skb)
+ return -ENOMEM;
+
+ return ipqess_rx_buf_prepare(buf, rx_ring);
+}
+
+static int ipqess_rx_buf_alloc(struct ipqess_rx_ring *rx_ring)
+{
+ struct ipqess_buf *buf = &rx_ring->buf[rx_ring->head];
+
+ buf->skb = netdev_alloc_skb_ip_align(rx_ring->ess->netdev,
+ IPQESS_RX_HEAD_BUFF_SIZE);
+ if (!buf->skb)
+ return -ENOMEM;
+
+ return ipqess_rx_buf_prepare(buf, rx_ring);
+}
+
+static void ipqess_refill_work(struct work_struct *work)
+{
+ struct ipqess_rx_ring_refill *rx_refill = container_of(work,
+ struct ipqess_rx_ring_refill, refill_work);
+ struct ipqess_rx_ring *rx_ring = rx_refill->rx_ring;
+ int refill = 0;
+
+ /* don't let this loop by accident. */
+ while (atomic_dec_and_test(&rx_ring->refill_count)) {
+ napi_disable(&rx_ring->napi_rx);
+ if (ipqess_rx_buf_alloc(rx_ring)) {
+ refill++;
+ dev_dbg(rx_ring->ppdev,
+ "Not all buffers were reallocated");
+ }
+ napi_enable(&rx_ring->napi_rx);
+ }
+
+ if (atomic_add_return(refill, &rx_ring->refill_count))
+ schedule_work(&rx_refill->refill_work);
+}
+
+
+static int ipqess_rx_ring_alloc(struct ipqess *ess)
+{
+ int i;
+
+ for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) {
+ int j;
+
+ ess->rx_ring[i].ess = ess;
+ ess->rx_ring[i].ppdev = &ess->pdev->dev;
+ ess->rx_ring[i].ring_id = i;
+ ess->rx_ring[i].idx = i * 2;
+
+ ess->rx_ring[i].buf = devm_kzalloc(&ess->pdev->dev,
+ sizeof(struct ipqess_buf) * IPQESS_RX_RING_SIZE,
+ GFP_KERNEL);
+ if (!ess->rx_ring[i].buf)
+ return -ENOMEM;
+
+ ess->rx_ring[i].hw_desc = dmam_alloc_coherent(&ess->pdev->dev,
+ sizeof(struct ipqess_rx_desc) * IPQESS_RX_RING_SIZE,
+ &ess->rx_ring[i].dma, GFP_KERNEL);
+ if (!ess->rx_ring[i].hw_desc)
+ return -ENOMEM;
+
+ for (j = 0; j < IPQESS_RX_RING_SIZE; j++)
+ if (ipqess_rx_buf_alloc(&ess->rx_ring[i]) < 0)
+ return -ENOMEM;
+
+ ess->rx_refill[i].rx_ring = &ess->rx_ring[i];
+ INIT_WORK(&ess->rx_refill[i].refill_work, ipqess_refill_work);
+
+ ipqess_w32(ess, IPQESS_REG_RFD_BASE_ADDR_Q(ess->rx_ring[i].idx),
+ (u32)(ess->rx_ring[i].dma));
+ }
+
+ ipqess_w32(ess, IPQESS_REG_RX_DESC0,
+ (IPQESS_RX_HEAD_BUFF_SIZE << IPQESS_RX_BUF_SIZE_SHIFT) |
+ (IPQESS_RX_RING_SIZE << IPQESS_RFD_RING_SIZE_SHIFT));
+
+ return 0;
+}
+
+static void ipqess_rx_ring_free(struct ipqess *ess)
+{
+ int i;
+
+ for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) {
+ int j;
+
+ atomic_set(&ess->rx_ring[i].refill_count, 0);
+ cancel_work_sync(&ess->rx_refill[i].refill_work);
+
+ for (j = 0; j < IPQESS_RX_RING_SIZE; j++) {
+ dma_unmap_single(&ess->pdev->dev,
+ ess->rx_ring[i].buf[j].dma,
+ ess->rx_ring[i].buf[j].length,
+ DMA_FROM_DEVICE);
+ dev_kfree_skb_any(ess->rx_ring[i].buf[j].skb);
+ }
+ }
+}
+
+static struct net_device_stats *ipqess_get_stats(struct net_device *netdev)
+{
+ struct ipqess *ess = netdev_priv(netdev);
+
+ spin_lock(&ess->stats_lock);
+ ipqess_update_hw_stats(ess);
+ spin_unlock(&ess->stats_lock);
+
+ return &ess->stats;
+}
+
+static int ipqess_rx_poll(struct ipqess_rx_ring *rx_ring, int budget)
+{
+ u32 length = 0, num_desc, tail, rx_ring_tail;
+ int done = 0;
+
+ rx_ring_tail = rx_ring->tail;
+
+ tail = ipqess_r32(rx_ring->ess, IPQESS_REG_RFD_IDX_Q(rx_ring->idx));
+ tail >>= IPQESS_RFD_CONS_IDX_SHIFT;
+ tail &= IPQESS_RFD_CONS_IDX_MASK;
+
+ while (done < budget) {
+ struct sk_buff *skb;
+ struct ipqess_rx_desc *rd;
+
+ if (rx_ring_tail == tail)
+ break;
+
+ dma_unmap_single(rx_ring->ppdev,
+ rx_ring->buf[rx_ring_tail].dma,
+ rx_ring->buf[rx_ring_tail].length,
+ DMA_FROM_DEVICE);
+
+ skb = xchg(&rx_ring->buf[rx_ring_tail].skb, NULL);
+ rd = (struct ipqess_rx_desc *)skb->data;
+ rx_ring_tail = IPQESS_NEXT_IDX(rx_ring_tail, IPQESS_RX_RING_SIZE);
+
+ /* Check if RRD is valid */
+ if (!(rd->rrd7 & IPQESS_RRD_DESC_VALID)) {
+ num_desc = 1;
+ dev_kfree_skb_any(skb);
+ goto skip;
+ }
+
+ num_desc = rd->rrd1 & IPQESS_RRD_NUM_RFD_MASK;
+ length = rd->rrd6 & IPQESS_RRD_PKT_SIZE_MASK;
+
+ skb_reserve(skb, IPQESS_RRD_SIZE);
+ if (num_desc > 1) {
+ /* can we use build_skb here ? */
+ struct sk_buff *skb_prev = NULL;
+ int size_remaining;
+ int i;
+
+ skb->data_len = 0;
+ skb->tail += (IPQESS_RX_HEAD_BUFF_SIZE - IPQESS_RRD_SIZE);
+ skb->len = skb->truesize = length;
+ size_remaining = length - (IPQESS_RX_HEAD_BUFF_SIZE - IPQESS_RRD_SIZE);
+
+ for (i = 1; i < num_desc; i++) {
+ /* TODO: use build_skb ? */
+ struct sk_buff *skb_temp = rx_ring->buf[rx_ring_tail].skb;
+
+ dma_unmap_single(rx_ring->ppdev,
+ rx_ring->buf[rx_ring_tail].dma,
+ rx_ring->buf[rx_ring_tail].length,
+ DMA_FROM_DEVICE);
+
+ skb_put(skb_temp, min(size_remaining, IPQESS_RX_HEAD_BUFF_SIZE));
+ if (skb_prev)
+ skb_prev->next = rx_ring->buf[rx_ring_tail].skb;
+ else
+ skb_shinfo(skb)->frag_list = rx_ring->buf[rx_ring_tail].skb;
+ skb_prev = rx_ring->buf[rx_ring_tail].skb;
+ rx_ring->buf[rx_ring_tail].skb->next = NULL;
+
+ skb->data_len += rx_ring->buf[rx_ring_tail].skb->len;
+ size_remaining -= rx_ring->buf[rx_ring_tail].skb->len;
+
+ rx_ring_tail = IPQESS_NEXT_IDX(rx_ring_tail, IPQESS_RX_RING_SIZE);
+ }
+
+ } else {
+ skb_put(skb, length);
+ }
+
+ skb->dev = rx_ring->ess->netdev;
+ skb->protocol = eth_type_trans(skb, rx_ring->ess->netdev);
+ skb_record_rx_queue(skb, rx_ring->ring_id);
+
+ if (rd->rrd6 & IPQESS_RRD_CSUM_FAIL_MASK)
+ skb_checksum_none_assert(skb);
+ else
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ if (rd->rrd7 & IPQESS_RRD_CVLAN) {
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), rd->rrd4);
+ } else if (rd->rrd1 & IPQESS_RRD_SVLAN) {
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021AD), rd->rrd4);
+ }
+ napi_gro_receive(&rx_ring->napi_rx, skb);
+
+ /* TODO: do we need to have these here ? */
+ rx_ring->ess->stats.rx_packets++;
+ rx_ring->ess->stats.rx_bytes += length;
+
+ done++;
+skip:
+
+ num_desc += atomic_xchg(&rx_ring->refill_count, 0);
+ while (num_desc) {
+ if (ipqess_rx_buf_alloc_napi(rx_ring)) {
+ num_desc = atomic_add_return(num_desc,
+ &rx_ring->refill_count);
+ if (num_desc >= ((4 * IPQESS_RX_RING_SIZE + 6) / 7))
+ schedule_work(&rx_ring->ess->rx_refill[rx_ring->ring_id].refill_work);
+ break;
+ }
+ num_desc--;
+ }
+ }
+
+ ipqess_w32(rx_ring->ess, IPQESS_REG_RX_SW_CONS_IDX_Q(rx_ring->idx),
+ rx_ring_tail);
+ rx_ring->tail = rx_ring_tail;
+
+ return done;
+}
+
+static int ipqess_tx_complete(struct ipqess_tx_ring *tx_ring, int budget)
+{
+ u32 tail;
+ int done = 0;
+ int total = 0, ret;
+
+ tail = ipqess_r32(tx_ring->ess, IPQESS_REG_TPD_IDX_Q(tx_ring->idx));
+ tail >>= IPQESS_TPD_CONS_IDX_SHIFT;
+ tail &= IPQESS_TPD_CONS_IDX_MASK;
+
+ while ((tx_ring->tail != tail) && (done < budget)) {
+ //pr_info("freeing txq:%d tail:%d tailbuf:%p\n", tx_ring->idx, tx_ring->tail, &tx_ring->buf[tx_ring->tail]);
+ ret = ipqess_tx_unmap_and_free(&tx_ring->ess->pdev->dev,
+ &tx_ring->buf[tx_ring->tail]);
+ tx_ring->tail = IPQESS_NEXT_IDX(tx_ring->tail, tx_ring->count);
+ if (ret) {
+ total += ret;
+ done++;
+ }
+ }
+
+ ipqess_w32(tx_ring->ess,
+ IPQESS_REG_TX_SW_CONS_IDX_Q(tx_ring->idx),
+ tx_ring->tail);
+
+ if (netif_tx_queue_stopped(tx_ring->nq)) {
+ netdev_dbg(tx_ring->ess->netdev, "waking up tx queue %d\n",
+ tx_ring->idx);
+ netif_tx_wake_queue(tx_ring->nq);
+ }
+
+ netdev_tx_completed_queue(tx_ring->nq, done, total);
+
+ return done;
+}
+
+static int ipqess_tx_napi(struct napi_struct *napi, int budget)
+{
+ struct ipqess_tx_ring *tx_ring = container_of(napi, struct ipqess_tx_ring,
+ napi_tx);
+ u32 tx_status;
+ int work_done = 0;
+
+ tx_status = ipqess_r32(tx_ring->ess, IPQESS_REG_TX_ISR);
+ tx_status &= BIT(tx_ring->idx);
+
+ work_done = ipqess_tx_complete(tx_ring, budget);
+
+ ipqess_w32(tx_ring->ess, IPQESS_REG_TX_ISR, tx_status);
+
+ if (likely(work_done < budget)) {
+ if (napi_complete_done(napi, work_done))
+ ipqess_w32(tx_ring->ess,
+ IPQESS_REG_TX_INT_MASK_Q(tx_ring->idx), 0x1);
+ }
+
+ return work_done;
+}
+
+static int ipqess_rx_napi(struct napi_struct *napi, int budget)
+{
+ struct ipqess_rx_ring *rx_ring = container_of(napi, struct ipqess_rx_ring,
+ napi_rx);
+ struct ipqess *ess = rx_ring->ess;
+ int remain_budget = budget;
+ int rx_done;
+ u32 rx_mask = BIT(rx_ring->idx);
+ u32 status;
+
+poll_again:
+ ipqess_w32(ess, IPQESS_REG_RX_ISR, rx_mask);
+ rx_done = ipqess_rx_poll(rx_ring, remain_budget);
+
+ if (rx_done == remain_budget)
+ return budget;
+
+ status = ipqess_r32(ess, IPQESS_REG_RX_ISR);
+ if (status & rx_mask) {
+ remain_budget -= rx_done;
+ goto poll_again;
+ }
+
+ if (napi_complete_done(napi, rx_done + budget - remain_budget))
+ ipqess_w32(ess, IPQESS_REG_RX_INT_MASK_Q(rx_ring->idx), 0x1);
+
+ return rx_done + budget - remain_budget;
+}
+
+static irqreturn_t ipqess_interrupt_tx(int irq, void *priv)
+{
+ struct ipqess_tx_ring *tx_ring = (struct ipqess_tx_ring *) priv;
+
+ if (likely(napi_schedule_prep(&tx_ring->napi_tx))) {
+ __napi_schedule(&tx_ring->napi_tx);
+ ipqess_w32(tx_ring->ess,
+ IPQESS_REG_TX_INT_MASK_Q(tx_ring->idx),
+ 0x0);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t ipqess_interrupt_rx(int irq, void *priv)
+{
+ struct ipqess_rx_ring *rx_ring = (struct ipqess_rx_ring *) priv;
+
+ if (likely(napi_schedule_prep(&rx_ring->napi_rx))) {
+ __napi_schedule(&rx_ring->napi_rx);
+ ipqess_w32(rx_ring->ess,
+ IPQESS_REG_RX_INT_MASK_Q(rx_ring->idx),
+ 0x0);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void ipqess_irq_enable(struct ipqess *ess)
+{
+ int i;
+
+ ipqess_w32(ess, IPQESS_REG_RX_ISR, 0xff);
+ ipqess_w32(ess, IPQESS_REG_TX_ISR, 0xffff);
+ for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) {
+ ipqess_w32(ess, IPQESS_REG_RX_INT_MASK_Q(ess->rx_ring[i].idx), 1);
+ ipqess_w32(ess, IPQESS_REG_TX_INT_MASK_Q(ess->tx_ring[i].idx), 1);
+ }
+}
+
+static void ipqess_irq_disable(struct ipqess *ess)
+{
+ int i;
+
+ for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) {
+ ipqess_w32(ess, IPQESS_REG_RX_INT_MASK_Q(ess->rx_ring[i].idx), 0);
+ ipqess_w32(ess, IPQESS_REG_TX_INT_MASK_Q(ess->tx_ring[i].idx), 0);
+ }
+}
+
+static int __init ipqess_init(struct net_device *netdev)
+{
+ struct ipqess *ess = netdev_priv(netdev);
+ struct device_node *of_node = ess->pdev->dev.of_node;
+ return phylink_of_phy_connect(ess->phylink, of_node, 0);
+}
+
+static void ipqess_uninit(struct net_device *netdev)
+{
+ struct ipqess *ess = netdev_priv(netdev);
+
+ phylink_disconnect_phy(ess->phylink);
+}
+
+static int ipqess_open(struct net_device *netdev)
+{
+ struct ipqess *ess = netdev_priv(netdev);
+ int i;
+
+ for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) {
+ napi_enable(&ess->tx_ring[i].napi_tx);
+ napi_enable(&ess->rx_ring[i].napi_rx);
+ }
+ ipqess_irq_enable(ess);
+ phylink_start(ess->phylink);
+ netif_tx_start_all_queues(netdev);
+
+ return 0;
+}
+
+static int ipqess_stop(struct net_device *netdev)
+{
+ struct ipqess *ess = netdev_priv(netdev);
+ int i;
+
+ netif_tx_stop_all_queues(netdev);
+ phylink_stop(ess->phylink);
+ ipqess_irq_disable(ess);
+ for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) {
+ napi_disable(&ess->tx_ring[i].napi_tx);
+ napi_disable(&ess->rx_ring[i].napi_rx);
+ }
+
+ return 0;
+}
+
+static int ipqess_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ struct ipqess *ess = netdev_priv(netdev);
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ return phylink_mii_ioctl(ess->phylink, ifr, cmd);
+ default:
+ break;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+
+static inline u16 ipqess_tx_desc_available(struct ipqess_tx_ring *tx_ring)
+{
+ u16 count = 0;
+
+ if (tx_ring->tail <= tx_ring->head)
+ count = IPQESS_TX_RING_SIZE;
+
+ count += tx_ring->tail - tx_ring->head - 1;
+
+ return count;
+}
+
+static inline int ipqess_cal_txd_req(struct sk_buff *skb)
+{
+ int tpds;
+
+ /* one TPD for the header, and one for each fragments */
+ tpds = 1 + skb_shinfo(skb)->nr_frags;
+ if (skb_is_gso(skb) && skb_is_gso_v6(skb)) {
+ /* for LSOv2 one extra TPD is needed */
+ tpds++;
+ }
+
+ return tpds;
+}
+
+static struct ipqess_buf *ipqess_get_tx_buffer(struct ipqess_tx_ring *tx_ring,
+ struct ipqess_tx_desc *desc)
+{
+ return &tx_ring->buf[desc - tx_ring->hw_desc];
+}
+
+static struct ipqess_tx_desc *ipqess_tx_desc_next(struct ipqess_tx_ring *tx_ring)
+{
+ struct ipqess_tx_desc *desc;
+
+ desc = &tx_ring->hw_desc[tx_ring->head];
+ tx_ring->head = IPQESS_NEXT_IDX(tx_ring->head, tx_ring->count);
+
+ return desc;
+}
+
+static void ipqess_rollback_tx(struct ipqess *eth,
+ struct ipqess_tx_desc *first_desc, int ring_id)
+{
+ struct ipqess_tx_ring *tx_ring = &eth->tx_ring[ring_id];
+ struct ipqess_buf *buf;
+ struct ipqess_tx_desc *desc = NULL;
+ u16 start_index, index;
+
+ start_index = first_desc - tx_ring->hw_desc;
+
+ index = start_index;
+ while (index != tx_ring->head) {
+ desc = &tx_ring->hw_desc[index];
+ buf = &tx_ring->buf[index];
+ ipqess_tx_unmap_and_free(&eth->pdev->dev, buf);
+ memset(desc, 0, sizeof(struct ipqess_tx_desc));
+ if (++index == tx_ring->count)
+ index = 0;
+ }
+ tx_ring->head = start_index;
+}
+
+static bool ipqess_process_dsa_tag_sh(struct sk_buff *skb, u32 *word3)
+{
+ struct skb_shared_info *shinfo = skb_shinfo(skb);
+ struct ipq40xx_dsa_tag_data *tag_data;
+
+ if (shinfo->dsa_tag_proto != DSA_TAG_PROTO_IPQ4019)
+ return false;
+
+ tag_data = (struct ipq40xx_dsa_tag_data *)shinfo->dsa_tag_data;
+
+ pr_debug("SH tag @ %08x, dp:%02x from_cpu:%u\n",
+ (u32)tag_data, tag_data->dp, tag_data->from_cpu);
+
+ *word3 |= tag_data->dp << IPQESS_TPD_PORT_BITMAP_SHIFT;
+ if (tag_data->from_cpu)
+ *word3 |= BIT(IPQESS_TPD_FROM_CPU_SHIFT);
+
+ return true;
+}
+
+static void ipqess_get_dp_info(struct ipqess *ess, struct sk_buff *skb,
+ u32 *word3)
+{
+ if (netdev_uses_dsa(ess->netdev)) {
+
+ if (ipqess_process_dsa_tag_sh(skb, word3))
+ return;
+ }
+
+ *word3 |= 0x3e << IPQESS_TPD_PORT_BITMAP_SHIFT;
+}
+
+static int ipqess_tx_map_and_fill(struct ipqess_tx_ring *tx_ring, struct sk_buff *skb)
+{
+ struct ipqess_buf *buf = NULL;
+ struct platform_device *pdev = tx_ring->ess->pdev;
+ struct ipqess_tx_desc *desc = NULL, *first_desc = NULL;
+ u32 word1 = 0, word3 = 0, lso_word1 = 0, svlan_tag = 0;
+ u16 len;
+ int i;
+
+ ipqess_get_dp_info(tx_ring->ess, skb, &word3);
+
+ if (skb_is_gso(skb)) {
+ if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4) {
+ lso_word1 |= IPQESS_TPD_IPV4_EN;
+ ip_hdr(skb)->check = 0;
+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(ip_hdr(skb)->saddr,
+ ip_hdr(skb)->daddr, 0, IPPROTO_TCP, 0);
+ } else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) {
+ lso_word1 |= IPQESS_TPD_LSO_V2_EN;
+ ipv6_hdr(skb)->payload_len = 0;
+ tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+ &ipv6_hdr(skb)->daddr, 0, IPPROTO_TCP, 0);
+ }
+
+ lso_word1 |= IPQESS_TPD_LSO_EN |
+ ((skb_shinfo(skb)->gso_size & IPQESS_TPD_MSS_MASK) << IPQESS_TPD_MSS_SHIFT) |
+ (skb_transport_offset(skb) << IPQESS_TPD_HDR_SHIFT);
+ } else if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
+ u8 css, cso;
+ cso = skb_checksum_start_offset(skb);
+ css = cso + skb->csum_offset;
+
+ word1 |= (IPQESS_TPD_CUSTOM_CSUM_EN);
+ word1 |= (cso >> 1) << IPQESS_TPD_HDR_SHIFT;
+ word1 |= ((css >> 1) << IPQESS_TPD_CUSTOM_CSUM_SHIFT);
+ }
+
+ if (skb_vlan_tag_present(skb)) {
+ switch (skb->vlan_proto) {
+ case htons(ETH_P_8021Q):
+ word3 |= BIT(IPQESS_TX_INS_CVLAN);
+ word3 |= skb_vlan_tag_get(skb) << IPQESS_TX_CVLAN_TAG_SHIFT;
+ break;
+ case htons(ETH_P_8021AD):
+ word1 |= BIT(IPQESS_TX_INS_SVLAN);
+ svlan_tag = skb_vlan_tag_get(skb);
+ break;
+ default:
+ dev_err(&pdev->dev, "no ctag or stag present\n");
+ goto vlan_tag_error;
+ }
+ }
+
+ if (eth_type_vlan(skb->protocol))
+ word1 |= IPQESS_TPD_VLAN_TAGGED;
+
+ if (skb->protocol == htons(ETH_P_PPP_SES))
+ word1 |= IPQESS_TPD_PPPOE_EN;
+
+ len = skb_headlen(skb);
+
+ first_desc = desc = ipqess_tx_desc_next(tx_ring);
+ if (lso_word1 & IPQESS_TPD_LSO_V2_EN) {
+ desc->addr = cpu_to_le16(skb->len);
+ desc->word1 = word1 | lso_word1;
+ desc->svlan_tag = svlan_tag;
+ desc->word3 = word3;
+ desc = ipqess_tx_desc_next(tx_ring);
+ }
+
+ buf = ipqess_get_tx_buffer(tx_ring, desc);
+ buf->length = len;
+ buf->dma = dma_map_single(&pdev->dev,
+ skb->data, len, DMA_TO_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buf->dma))
+ goto dma_error;
+
+ desc->addr = cpu_to_le32(buf->dma);
+ desc->len = cpu_to_le16(len);
+
+ buf->flags |= IPQESS_DESC_SINGLE;
+ desc->word1 = word1 | lso_word1;
+ desc->svlan_tag = svlan_tag;
+ desc->word3 = word3;
+
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+ len = skb_frag_size(frag);
+ desc = ipqess_tx_desc_next(tx_ring);
+ buf = ipqess_get_tx_buffer(tx_ring, desc);
+ buf->length = len;
+ buf->flags |= IPQESS_DESC_PAGE;
+ buf->dma = skb_frag_dma_map(&pdev->dev, frag, 0, len, DMA_TO_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buf->dma))
+ goto dma_error;
+
+ desc->addr = cpu_to_le32(buf->dma);
+ desc->len = cpu_to_le16(len);
+ desc->svlan_tag = svlan_tag;
+ desc->word1 = word1 | lso_word1;
+ desc->word3 = word3;
+ }
+ desc->word1 |= 1 << IPQESS_TPD_EOP_SHIFT;
+ buf->skb = skb;
+ buf->flags |= IPQESS_DESC_LAST;
+
+ return 0;
+
+dma_error:
+ ipqess_rollback_tx(tx_ring->ess, first_desc, tx_ring->ring_id);
+ dev_err(&pdev->dev, "TX DMA map failed\n");
+
+vlan_tag_error:
+ return -ENOMEM;
+}
+
+static inline void ipqess_kick_tx(struct ipqess_tx_ring *tx_ring)
+{
+ /* Ensure that all TPDs has been written completely */
+ dma_wmb();
+
+ /* update software producer index */
+ ipqess_w32(tx_ring->ess, IPQESS_REG_TPD_IDX_Q(tx_ring->idx),
+ tx_ring->head);
+}
+
+static netdev_tx_t ipqess_xmit(struct sk_buff *skb,
+ struct net_device *netdev)
+{
+ struct ipqess *ess = netdev_priv(netdev);
+ struct ipqess_tx_ring *tx_ring;
+ int avail;
+ int tx_num;
+ int ret;
+
+ tx_ring = &ess->tx_ring[skb_get_queue_mapping(skb)];
+ tx_num = ipqess_cal_txd_req(skb);
+ avail = ipqess_tx_desc_available(tx_ring);
+ if (avail < tx_num) {
+ netdev_dbg(netdev,
+ "stopping tx queue %d, avail=%d req=%d im=%x\n",
+ tx_ring->idx, avail, tx_num,
+ ipqess_r32(tx_ring->ess,
+ IPQESS_REG_TX_INT_MASK_Q(tx_ring->idx)));
+ netif_tx_stop_queue(tx_ring->nq);
+ ipqess_w32(tx_ring->ess, IPQESS_REG_TX_INT_MASK_Q(tx_ring->idx), 0x1);
+ ipqess_kick_tx(tx_ring);
+ return NETDEV_TX_BUSY;
+ }
+
+ ret = ipqess_tx_map_and_fill(tx_ring, skb);
+ if (ret) {
+ dev_kfree_skb_any(skb);
+ ess->stats.tx_errors++;
+ goto err_out;
+ }
+
+ ess->stats.tx_packets++;
+ ess->stats.tx_bytes += skb->len;
+ netdev_tx_sent_queue(tx_ring->nq, skb->len);
+
+ if (!netdev_xmit_more() || netif_xmit_stopped(tx_ring->nq))
+ ipqess_kick_tx(tx_ring);
+
+err_out:
+ return NETDEV_TX_OK;
+}
+
+static int ipqess_set_mac_address(struct net_device *netdev, void *p)
+{
+ int ret = eth_mac_addr(netdev, p);
+ struct ipqess *ess = netdev_priv(netdev);
+ const char *macaddr = netdev->dev_addr;
+
+ if (ret)
+ return ret;
+
+// spin_lock_bh(&mac->hw->page_lock);
+ ipqess_w32(ess, IPQESS_REG_MAC_CTRL1,
+ (macaddr[0] << 8) | macaddr[1]);
+ ipqess_w32(ess, IPQESS_REG_MAC_CTRL0,
+ (macaddr[2] << 24) | (macaddr[3] << 16) |
+ (macaddr[4] << 8) | macaddr[5]);
+// spin_unlock_bh(&mac->hw->page_lock);
+
+ return 0;
+}
+
+static void ipqess_tx_timeout(struct net_device *netdev, unsigned int txq_id)
+{
+ struct ipqess *ess = netdev_priv(netdev);
+ struct ipqess_tx_ring *tr = &ess->tx_ring[txq_id];
+
+ netdev_warn(netdev, "hardware queue %d is in stuck?\n",
+ tr->idx);
+
+ /* TODO: dump hardware queue */
+}
+
+static const struct net_device_ops ipqess_axi_netdev_ops = {
+ .ndo_init = ipqess_init,
+ .ndo_uninit = ipqess_uninit,
+ .ndo_open = ipqess_open,
+ .ndo_stop = ipqess_stop,
+ .ndo_do_ioctl = ipqess_do_ioctl,
+ .ndo_start_xmit = ipqess_xmit,
+ .ndo_get_stats = ipqess_get_stats,
+ .ndo_set_mac_address = ipqess_set_mac_address,
+ .ndo_tx_timeout = ipqess_tx_timeout,
+};
+
+static void ipqess_hw_stop(struct ipqess *ess)
+{
+ int i;
+
+ /* disable all RX queue IRQs */
+ for (i = 0; i < IPQESS_MAX_RX_QUEUE; i++)
+ ipqess_w32(ess, IPQESS_REG_RX_INT_MASK_Q(i), 0);
+
+ /* disable all TX queue IRQs */
+ for (i = 0; i < IPQESS_MAX_TX_QUEUE; i++)
+ ipqess_w32(ess, IPQESS_REG_TX_INT_MASK_Q(i), 0);
+
+ /* disable all other IRQs */
+ ipqess_w32(ess, IPQESS_REG_MISC_IMR, 0);
+ ipqess_w32(ess, IPQESS_REG_WOL_IMR, 0);
+
+ /* clear the IRQ status registers */
+ ipqess_w32(ess, IPQESS_REG_RX_ISR, 0xff);
+ ipqess_w32(ess, IPQESS_REG_TX_ISR, 0xffff);
+ ipqess_w32(ess, IPQESS_REG_MISC_ISR, 0x1fff);
+ ipqess_w32(ess, IPQESS_REG_WOL_ISR, 0x1);
+ ipqess_w32(ess, IPQESS_REG_WOL_CTRL, 0);
+
+ /* disable RX and TX queues */
+ ipqess_m32(ess, IPQESS_RXQ_CTRL_EN_MASK, 0, IPQESS_REG_RXQ_CTRL);
+ ipqess_m32(ess, IPQESS_TXQ_CTRL_TXQ_EN, 0, IPQESS_REG_TXQ_CTRL);
+}
+
+static int ipqess_hw_init(struct ipqess *ess)
+{
+ u32 tmp;
+ int i, err;
+
+ ipqess_hw_stop(ess);
+
+ ipqess_m32(ess, BIT(IPQESS_INTR_SW_IDX_W_TYP_SHIFT),
+ IPQESS_INTR_SW_IDX_W_TYPE << IPQESS_INTR_SW_IDX_W_TYP_SHIFT,
+ IPQESS_REG_INTR_CTRL);
+
+ /* enable IRQ delay slot */
+ ipqess_w32(ess, IPQESS_REG_IRQ_MODRT_TIMER_INIT,
+ (IPQESS_TX_IMT << IPQESS_IRQ_MODRT_TX_TIMER_SHIFT) |
+ (IPQESS_RX_IMT << IPQESS_IRQ_MODRT_RX_TIMER_SHIFT));
+
+ /* Set Customer and Service VLAN TPIDs */
+ ipqess_w32(ess, IPQESS_REG_VLAN_CFG,
+ (ETH_P_8021Q << IPQESS_VLAN_CFG_CVLAN_TPID_SHIFT) |
+ (ETH_P_8021AD << IPQESS_VLAN_CFG_SVLAN_TPID_SHIFT));
+
+ /* Configure the TX Queue bursting */
+ ipqess_w32(ess, IPQESS_REG_TXQ_CTRL,
+ (IPQESS_TPD_BURST << IPQESS_TXQ_NUM_TPD_BURST_SHIFT) |
+ (IPQESS_TXF_BURST << IPQESS_TXQ_TXF_BURST_NUM_SHIFT) |
+ IPQESS_TXQ_CTRL_TPD_BURST_EN);
+
+ /* Set RSS type */
+ ipqess_w32(ess, IPQESS_REG_RSS_TYPE,
+ IPQESS_RSS_TYPE_IPV4TCP | IPQESS_RSS_TYPE_IPV6_TCP |
+ IPQESS_RSS_TYPE_IPV4_UDP | IPQESS_RSS_TYPE_IPV6UDP |
+ IPQESS_RSS_TYPE_IPV4 | IPQESS_RSS_TYPE_IPV6);
+
+ /* Set RFD ring burst and threshold */
+ ipqess_w32(ess, IPQESS_REG_RX_DESC1,
+ (IPQESS_RFD_BURST << IPQESS_RXQ_RFD_BURST_NUM_SHIFT) |
+ (IPQESS_RFD_THR << IPQESS_RXQ_RFD_PF_THRESH_SHIFT) |
+ (IPQESS_RFD_LTHR << IPQESS_RXQ_RFD_LOW_THRESH_SHIFT));
+
+ /* Set Rx FIFO
+ * - threshold to start to DMA data to host
+ */
+ ipqess_w32(ess, IPQESS_REG_RXQ_CTRL,
+ IPQESS_FIFO_THRESH_128_BYTE | IPQESS_RXQ_CTRL_RMV_VLAN);
+
+ err = ipqess_rx_ring_alloc(ess);
+ if (err)
+ return err;
+
+ err = ipqess_tx_ring_alloc(ess);
+ if (err)
+ return err;
+
+ /* Load all of ring base addresses above into the dma engine */
+ ipqess_m32(ess, 0, BIT(IPQESS_LOAD_PTR_SHIFT),
+ IPQESS_REG_TX_SRAM_PART);
+
+ /* Disable TX FIFO low watermark and high watermark */
+ ipqess_w32(ess, IPQESS_REG_TXF_WATER_MARK, 0);
+
+ /* Configure RSS indirection table.
+ * 128 hash will be configured in the following
+ * pattern: hash{0,1,2,3} = {Q0,Q2,Q4,Q6} respectively
+ * and so on
+ */
+ for (i = 0; i < IPQESS_NUM_IDT; i++)
+ ipqess_w32(ess, IPQESS_REG_RSS_IDT(i), IPQESS_RSS_IDT_VALUE);
+
+ /* Configure load balance mapping table.
+ * 4 table entry will be configured according to the
+ * following pattern: load_balance{0,1,2,3} = {Q0,Q1,Q3,Q4}
+ * respectively.
+ */
+ ipqess_w32(ess, IPQESS_REG_LB_RING, IPQESS_LB_REG_VALUE);
+
+ /* Configure Virtual queue for Tx rings */
+ ipqess_w32(ess, IPQESS_REG_VQ_CTRL0, IPQESS_VQ_REG_VALUE);
+ ipqess_w32(ess, IPQESS_REG_VQ_CTRL1, IPQESS_VQ_REG_VALUE);
+
+ /* Configure Max AXI Burst write size to 128 bytes*/
+ ipqess_w32(ess, IPQESS_REG_AXIW_CTRL_MAXWRSIZE,
+ IPQESS_AXIW_MAXWRSIZE_VALUE);
+
+ /* Enable TX queues */
+ ipqess_m32(ess, 0, IPQESS_TXQ_CTRL_TXQ_EN, IPQESS_REG_TXQ_CTRL);
+
+ /* Enable RX queues */
+ tmp = 0;
+ for (i = 0; i < IPQESS_NETDEV_QUEUES; i++)
+ tmp |= IPQESS_RXQ_CTRL_EN(ess->rx_ring[i].idx);
+
+ ipqess_m32(ess, IPQESS_RXQ_CTRL_EN_MASK, tmp, IPQESS_REG_RXQ_CTRL);
+
+ return 0;
+}
+
+static void ipqess_validate(struct phylink_config *config,
+ unsigned long *supported,
+ struct phylink_link_state *state)
+{
+ struct ipqess *ess = container_of(config, struct ipqess, phylink_config);
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+
+ if (state->interface != PHY_INTERFACE_MODE_INTERNAL) {
+ dev_err(&ess->pdev->dev, "unsupported interface mode: %d\n",
+ state->interface);
+ linkmode_zero(supported);
+ return;
+ }
+
+ phylink_set_port_modes(mask);
+ phylink_set(mask, 1000baseT_Full);
+ phylink_set(mask, Pause);
+ phylink_set(mask, Asym_Pause);
+
+ linkmode_and(supported, supported, mask);
+ linkmode_and(state->advertising, state->advertising, mask);
+}
+
+static void ipqess_mac_config(struct phylink_config *config, unsigned int mode,
+ const struct phylink_link_state *state)
+{
+ /* TODO */
+}
+
+static void ipqess_mac_link_down(struct phylink_config *config,
+ unsigned int mode,
+ phy_interface_t interface)
+{
+ /* TODO */
+}
+
+static void ipqess_mac_link_up(struct phylink_config *config,
+ struct phy_device *phy, unsigned int mode,
+ phy_interface_t interface,
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause)
+{
+ /* TODO */
+}
+
+static struct phylink_mac_ops ipqess_phylink_mac_ops = {
+ .validate = ipqess_validate,
+ .mac_config = ipqess_mac_config,
+ .mac_link_up = ipqess_mac_link_up,
+ .mac_link_down = ipqess_mac_link_down,
+};
+
+static void ipqess_cleanup(struct ipqess *ess)
+{
+ ipqess_hw_stop(ess);
+ unregister_netdev(ess->netdev);
+
+ ipqess_tx_ring_free(ess);
+ ipqess_rx_ring_free(ess);
+
+ if (!IS_ERR_OR_NULL(ess->phylink))
+ phylink_destroy(ess->phylink);
+}
+
+static void ess_reset(struct ipqess *ess)
+{
+ reset_control_assert(ess->ess_rst);
+
+ mdelay(10);
+
+ reset_control_deassert(ess->ess_rst);
+
+ /* Waiting for all inner tables to be flushed and reinitialized.
+ * This takes between 5 and 10ms.
+ */
+ mdelay(10);
+}
+
+static int ipqess_axi_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct ipqess *ess;
+ struct net_device *netdev;
+ struct resource *res;
+ int i, err = 0;
+
+ netdev = devm_alloc_etherdev_mqs(&pdev->dev, sizeof(struct ipqess),
+ IPQESS_NETDEV_QUEUES,
+ IPQESS_NETDEV_QUEUES);
+ if (!netdev)
+ return -ENOMEM;
+
+ ess = netdev_priv(netdev);
+ ess->netdev = netdev;
+ ess->pdev = pdev;
+ spin_lock_init(&ess->stats_lock);
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+ platform_set_drvdata(pdev, netdev);
+
+ err = of_get_mac_address(np, netdev->dev_addr);
+ if (err == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ if (err) {
+
+ random_ether_addr(netdev->dev_addr);
+ dev_info(&ess->pdev->dev, "generated random MAC address %pM\n",
+ netdev->dev_addr);
+ netdev->addr_assign_type = NET_ADDR_RANDOM;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ess->hw_addr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(ess->hw_addr)) {
+ err = PTR_ERR(ess->hw_addr);
+ goto err_out;
+ }
+
+ ess->ess_clk = of_clk_get_by_name(np, "ess_clk");
+ if (IS_ERR(ess->ess_clk)) {
+ dev_err(&pdev->dev, "Failed to get ess_clk\n");
+ return PTR_ERR(ess->ess_clk);
+ }
+
+ ess->ess_rst = devm_reset_control_get(&pdev->dev, "ess_rst");
+ if (IS_ERR(ess->ess_rst)) {
+ dev_err(&pdev->dev, "Failed to get ess_rst control!\n");
+ return PTR_ERR(ess->ess_rst);
+ }
+
+ clk_prepare_enable(ess->ess_clk);
+
+ ess_reset(ess);
+
+ ess->phylink_config.dev = &netdev->dev;
+ ess->phylink_config.type = PHYLINK_NETDEV;
+ ess->phylink_config.pcs_poll = true;
+
+ ess->phylink = phylink_create(&ess->phylink_config,
+ of_fwnode_handle(np),
+ PHY_INTERFACE_MODE_INTERNAL,
+ &ipqess_phylink_mac_ops);
+ if (IS_ERR(ess->phylink)) {
+ err = PTR_ERR(ess->phylink);
+ goto err_out;
+ }
+
+ for (i = 0; i < IPQESS_MAX_TX_QUEUE; i++) {
+ ess->tx_irq[i] = platform_get_irq(pdev, i);
+ scnprintf(ess->tx_irq_names[i], sizeof(ess->tx_irq_names[i]),
+ "%s:txq%d", pdev->name, i);
+ }
+
+ for (i = 0; i < IPQESS_MAX_RX_QUEUE; i++) {
+ ess->rx_irq[i] = platform_get_irq(pdev, i + IPQESS_MAX_TX_QUEUE);
+ scnprintf(ess->rx_irq_names[i], sizeof(ess->rx_irq_names[i]),
+ "%s:rxq%d", pdev->name, i);
+ }
+
+#undef NETIF_F_TSO6
+#define NETIF_F_TSO6 0
+
+ netdev->netdev_ops = &ipqess_axi_netdev_ops;
+ netdev->features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM |
+ NETIF_F_HW_VLAN_CTAG_RX |
+ NETIF_F_HW_VLAN_CTAG_TX |
+ NETIF_F_TSO | NETIF_F_TSO6 |
+ NETIF_F_GRO | NETIF_F_SG;
+ /* feature change is not supported yet */
+ netdev->hw_features = 0;
+ netdev->vlan_features = NETIF_F_HW_CSUM | NETIF_F_SG | NETIF_F_RXCSUM |
+ NETIF_F_TSO | NETIF_F_TSO6 |
+ NETIF_F_GRO;
+ netdev->watchdog_timeo = 5 * HZ;
+ netdev->base_addr = (u32) ess->hw_addr;
+ netdev->max_mtu = 9000;
+ netdev->gso_max_segs = IPQESS_TX_RING_SIZE / 2;
+
+ ipqess_set_ethtool_ops(netdev);
+
+ err = register_netdev(netdev);
+ if (err)
+ goto err_out;
+
+ err = ipqess_hw_init(ess);
+ if (err)
+ goto err_out;
+
+ for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) {
+ int qid;
+
+ netif_tx_napi_add(netdev, &ess->tx_ring[i].napi_tx,
+ ipqess_tx_napi, 64);
+ netif_napi_add(netdev,
+ &ess->rx_ring[i].napi_rx,
+ ipqess_rx_napi, 64);
+
+ qid = ess->tx_ring[i].idx;
+ err = devm_request_irq(&ess->netdev->dev, ess->tx_irq[qid],
+ ipqess_interrupt_tx, 0, ess->tx_irq_names[qid],
+ &ess->tx_ring[i]);
+ if (err)
+ goto err_out;
+
+ qid = ess->rx_ring[i].idx;
+ err = devm_request_irq(&ess->netdev->dev, ess->rx_irq[qid],
+ ipqess_interrupt_rx, 0, ess->rx_irq_names[qid],
+ &ess->rx_ring[i]);
+ if (err)
+ goto err_out;
+ }
+
+ return 0;
+
+err_out:
+ ipqess_cleanup(ess);
+ return err;
+}
+
+static int ipqess_axi_remove(struct platform_device *pdev)
+{
+ const struct net_device *netdev = platform_get_drvdata(pdev);
+ struct ipqess *ess = netdev_priv(netdev);
+
+ ipqess_cleanup(ess);
+
+ return 0;
+}
+
+static const struct of_device_id ipqess_of_mtable[] = {
+ {.compatible = "qcom,ipq4019-ess-edma" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ipqess_of_mtable);
+
+static struct platform_driver ipqess_axi_driver = {
+ .driver = {
+ .name = "ipqess-edma",
+ .of_match_table = ipqess_of_mtable,
+ },
+ .probe = ipqess_axi_probe,
+ .remove = ipqess_axi_remove,
+};
+
+module_platform_driver(ipqess_axi_driver);
+
+MODULE_AUTHOR("Qualcomm Atheros Inc");
+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
+MODULE_AUTHOR("Christian Lamparter <chunkeey@gmail.com>");
+MODULE_AUTHOR("Gabor Juhos <j4g8y7@gmail.com>");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/ipqess/ipqess.h
@@ -0,0 +1,530 @@
+// SPDX-License-Identifier: (GPL-2.0 OR ISC)
+/* Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2017 - 2018, John Crispin <john@phrozen.org>
+ * Copyright (c) 2018 - 2019, Christian Lamparter <chunkeey@gmail.com>
+ * Copyright (c) 2020 - 2021, Gabor Juhos <j4g8y7@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all copies.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _IPQESS_H_
+#define _IPQESS_H_
+
+#define IPQESS_NETDEV_QUEUES 4
+
+#define IPQESS_TPD_EOP_SHIFT 31
+
+#define IPQESS_PORT_ID_SHIFT 12
+#define IPQESS_PORT_ID_MASK 0x7
+
+/* tpd word 3 bit 18-28 */
+#define IPQESS_TPD_PORT_BITMAP_SHIFT 18
+
+#define IPQESS_TPD_FROM_CPU_SHIFT 25
+
+#define IPQESS_RX_RING_SIZE 128
+#define IPQESS_RX_HEAD_BUFF_SIZE 1540
+#define IPQESS_TX_RING_SIZE 128
+#define IPQESS_MAX_RX_QUEUE 8
+#define IPQESS_MAX_TX_QUEUE 16
+
+
+/* Configurations */
+#define IPQESS_INTR_CLEAR_TYPE 0
+#define IPQESS_INTR_SW_IDX_W_TYPE 0
+#define IPQESS_FIFO_THRESH_TYPE 0
+#define IPQESS_RSS_TYPE 0
+#define IPQESS_RX_IMT 0x0020
+#define IPQESS_TX_IMT 0x0050
+#define IPQESS_TPD_BURST 5
+#define IPQESS_TXF_BURST 0x100
+#define IPQESS_RFD_BURST 8
+#define IPQESS_RFD_THR 16
+#define IPQESS_RFD_LTHR 0
+
+/* Flags used in transmit direction */
+#define IPQESS_DESC_LAST 0x1
+#define IPQESS_DESC_SINGLE 0x2
+#define IPQESS_DESC_PAGE 0x4
+
+struct ipqesstool_statistics {
+ u32 tx_q0_pkt;
+ u32 tx_q1_pkt;
+ u32 tx_q2_pkt;
+ u32 tx_q3_pkt;
+ u32 tx_q4_pkt;
+ u32 tx_q5_pkt;
+ u32 tx_q6_pkt;
+ u32 tx_q7_pkt;
+ u32 tx_q8_pkt;
+ u32 tx_q9_pkt;
+ u32 tx_q10_pkt;
+ u32 tx_q11_pkt;
+ u32 tx_q12_pkt;
+ u32 tx_q13_pkt;
+ u32 tx_q14_pkt;
+ u32 tx_q15_pkt;
+ u32 tx_q0_byte;
+ u32 tx_q1_byte;
+ u32 tx_q2_byte;
+ u32 tx_q3_byte;
+ u32 tx_q4_byte;
+ u32 tx_q5_byte;
+ u32 tx_q6_byte;
+ u32 tx_q7_byte;
+ u32 tx_q8_byte;
+ u32 tx_q9_byte;
+ u32 tx_q10_byte;
+ u32 tx_q11_byte;
+ u32 tx_q12_byte;
+ u32 tx_q13_byte;
+ u32 tx_q14_byte;
+ u32 tx_q15_byte;
+ u32 rx_q0_pkt;
+ u32 rx_q1_pkt;
+ u32 rx_q2_pkt;
+ u32 rx_q3_pkt;
+ u32 rx_q4_pkt;
+ u32 rx_q5_pkt;
+ u32 rx_q6_pkt;
+ u32 rx_q7_pkt;
+ u32 rx_q0_byte;
+ u32 rx_q1_byte;
+ u32 rx_q2_byte;
+ u32 rx_q3_byte;
+ u32 rx_q4_byte;
+ u32 rx_q5_byte;
+ u32 rx_q6_byte;
+ u32 rx_q7_byte;
+ u32 tx_desc_error;
+};
+
+struct ipqess_tx_desc {
+ __le16 len;
+ __le16 svlan_tag;
+ __le32 word1;
+ __le32 addr;
+ __le32 word3;
+} __aligned(16) __packed;
+
+struct ipqess_rx_desc {
+ u16 rrd0;
+ u16 rrd1;
+ u16 rrd2;
+ u16 rrd3;
+ u16 rrd4;
+ u16 rrd5;
+ u16 rrd6;
+ u16 rrd7;
+} __aligned(16) __packed;
+
+struct ipqess_buf {
+ struct sk_buff *skb;
+ dma_addr_t dma;
+ u32 flags;
+ u16 length;
+};
+
+struct ipqess_tx_ring {
+ struct napi_struct napi_tx;
+ u32 idx;
+ int ring_id;
+ struct ipqess *ess;
+ struct netdev_queue *nq;
+ struct ipqess_tx_desc *hw_desc;
+ struct ipqess_buf *buf;
+ dma_addr_t dma;
+ u16 count;
+ u16 head;
+ u16 tail;
+};
+
+struct ipqess_rx_ring {
+ struct napi_struct napi_rx;
+ u32 idx;
+ int ring_id;
+ struct ipqess *ess;
+ struct device *ppdev;
+ struct ipqess_rx_desc **hw_desc;
+ struct ipqess_buf *buf;
+ dma_addr_t dma;
+ u16 head;
+ u16 tail;
+ atomic_t refill_count;
+};
+
+struct ipqess_rx_ring_refill {
+ struct ipqess_rx_ring *rx_ring;
+ struct work_struct refill_work;
+};
+
+#define IPQESS_IRQ_NAME_LEN 32
+
+struct ipqess {
+ struct net_device *netdev;
+ void __iomem *hw_addr;
+ struct clk *ess_clk;
+ struct reset_control *ess_rst;
+
+ struct ipqess_rx_ring rx_ring[IPQESS_NETDEV_QUEUES];
+
+ struct platform_device *pdev;
+ struct phylink *phylink;
+ struct phylink_config phylink_config;
+ struct ipqess_tx_ring tx_ring[IPQESS_NETDEV_QUEUES];
+
+ struct ipqesstool_statistics ipqessstats;
+ spinlock_t stats_lock;
+ struct net_device_stats stats;
+
+ struct ipqess_rx_ring_refill rx_refill[IPQESS_NETDEV_QUEUES];
+ u32 tx_irq[IPQESS_MAX_TX_QUEUE];
+ char tx_irq_names[IPQESS_MAX_TX_QUEUE][IPQESS_IRQ_NAME_LEN];
+ u32 rx_irq[IPQESS_MAX_RX_QUEUE];
+ char rx_irq_names[IPQESS_MAX_TX_QUEUE][IPQESS_IRQ_NAME_LEN];
+};
+
+static inline void build_test(void)
+{
+ struct ipqess *ess;
+ BUILD_BUG_ON(ARRAY_SIZE(ess->rx_ring) != ARRAY_SIZE(ess->rx_refill));
+}
+
+void ipqess_set_ethtool_ops(struct net_device *netdev);
+void ipqess_update_hw_stats(struct ipqess *ess);
+
+/* register definition */
+#define IPQESS_REG_MAS_CTRL 0x0
+#define IPQESS_REG_TIMEOUT_CTRL 0x004
+#define IPQESS_REG_DBG0 0x008
+#define IPQESS_REG_DBG1 0x00C
+#define IPQESS_REG_SW_CTRL0 0x100
+#define IPQESS_REG_SW_CTRL1 0x104
+
+/* Interrupt Status Register */
+#define IPQESS_REG_RX_ISR 0x200
+#define IPQESS_REG_TX_ISR 0x208
+#define IPQESS_REG_MISC_ISR 0x210
+#define IPQESS_REG_WOL_ISR 0x218
+
+#define IPQESS_MISC_ISR_RX_URG_Q(x) (1 << x)
+
+#define IPQESS_MISC_ISR_AXIR_TIMEOUT 0x00000100
+#define IPQESS_MISC_ISR_AXIR_ERR 0x00000200
+#define IPQESS_MISC_ISR_TXF_DEAD 0x00000400
+#define IPQESS_MISC_ISR_AXIW_ERR 0x00000800
+#define IPQESS_MISC_ISR_AXIW_TIMEOUT 0x00001000
+
+#define IPQESS_WOL_ISR 0x00000001
+
+/* Interrupt Mask Register */
+#define IPQESS_REG_MISC_IMR 0x214
+#define IPQESS_REG_WOL_IMR 0x218
+
+#define IPQESS_RX_IMR_NORMAL_MASK 0x1
+#define IPQESS_TX_IMR_NORMAL_MASK 0x1
+#define IPQESS_MISC_IMR_NORMAL_MASK 0x80001FFF
+#define IPQESS_WOL_IMR_NORMAL_MASK 0x1
+
+/* Edma receive consumer index */
+#define IPQESS_REG_RX_SW_CONS_IDX_Q(x) (0x220 + ((x) << 2)) /* x is the queue id */
+
+/* Edma transmit consumer index */
+#define IPQESS_REG_TX_SW_CONS_IDX_Q(x) (0x240 + ((x) << 2)) /* x is the queue id */
+
+/* IRQ Moderator Initial Timer Register */
+#define IPQESS_REG_IRQ_MODRT_TIMER_INIT 0x280
+#define IPQESS_IRQ_MODRT_TIMER_MASK 0xFFFF
+#define IPQESS_IRQ_MODRT_RX_TIMER_SHIFT 0
+#define IPQESS_IRQ_MODRT_TX_TIMER_SHIFT 16
+
+/* Interrupt Control Register */
+#define IPQESS_REG_INTR_CTRL 0x284
+#define IPQESS_INTR_CLR_TYP_SHIFT 0
+#define IPQESS_INTR_SW_IDX_W_TYP_SHIFT 1
+#define IPQESS_INTR_CLEAR_TYPE_W1 0
+#define IPQESS_INTR_CLEAR_TYPE_R 1
+
+/* RX Interrupt Mask Register */
+#define IPQESS_REG_RX_INT_MASK_Q(x) (0x300 + ((x) << 2)) /* x = queue id */
+
+/* TX Interrupt mask register */
+#define IPQESS_REG_TX_INT_MASK_Q(x) (0x340 + ((x) << 2)) /* x = queue id */
+
+/* Load Ptr Register
+ * Software sets this bit after the initialization of the head and tail
+ */
+#define IPQESS_REG_TX_SRAM_PART 0x400
+#define IPQESS_LOAD_PTR_SHIFT 16
+
+/* TXQ Control Register */
+#define IPQESS_REG_TXQ_CTRL 0x404
+#define IPQESS_TXQ_CTRL_IP_OPTION_EN 0x10
+#define IPQESS_TXQ_CTRL_TXQ_EN 0x20
+#define IPQESS_TXQ_CTRL_ENH_MODE 0x40
+#define IPQESS_TXQ_CTRL_LS_8023_EN 0x80
+#define IPQESS_TXQ_CTRL_TPD_BURST_EN 0x100
+#define IPQESS_TXQ_CTRL_LSO_BREAK_EN 0x200
+#define IPQESS_TXQ_NUM_TPD_BURST_MASK 0xF
+#define IPQESS_TXQ_TXF_BURST_NUM_MASK 0xFFFF
+#define IPQESS_TXQ_NUM_TPD_BURST_SHIFT 0
+#define IPQESS_TXQ_TXF_BURST_NUM_SHIFT 16
+
+#define IPQESS_REG_TXF_WATER_MARK 0x408 /* In 8-bytes */
+#define IPQESS_TXF_WATER_MARK_MASK 0x0FFF
+#define IPQESS_TXF_LOW_WATER_MARK_SHIFT 0
+#define IPQESS_TXF_HIGH_WATER_MARK_SHIFT 16
+#define IPQESS_TXQ_CTRL_BURST_MODE_EN 0x80000000
+
+/* WRR Control Register */
+#define IPQESS_REG_WRR_CTRL_Q0_Q3 0x40c
+#define IPQESS_REG_WRR_CTRL_Q4_Q7 0x410
+#define IPQESS_REG_WRR_CTRL_Q8_Q11 0x414
+#define IPQESS_REG_WRR_CTRL_Q12_Q15 0x418
+
+/* Weight round robin(WRR), it takes queue as input, and computes
+ * starting bits where we need to write the weight for a particular
+ * queue
+ */
+#define IPQESS_WRR_SHIFT(x) (((x) * 5) % 20)
+
+/* Tx Descriptor Control Register */
+#define IPQESS_REG_TPD_RING_SIZE 0x41C
+#define IPQESS_TPD_RING_SIZE_SHIFT 0
+#define IPQESS_TPD_RING_SIZE_MASK 0xFFFF
+
+/* Transmit descriptor base address */
+#define IPQESS_REG_TPD_BASE_ADDR_Q(x) (0x420 + ((x) << 2)) /* x = queue id */
+
+/* TPD Index Register */
+#define IPQESS_REG_TPD_IDX_Q(x) (0x460 + ((x) << 2)) /* x = queue id */
+
+#define IPQESS_TPD_PROD_IDX_BITS 0x0000FFFF
+#define IPQESS_TPD_CONS_IDX_BITS 0xFFFF0000
+#define IPQESS_TPD_PROD_IDX_MASK 0xFFFF
+#define IPQESS_TPD_CONS_IDX_MASK 0xFFFF
+#define IPQESS_TPD_PROD_IDX_SHIFT 0
+#define IPQESS_TPD_CONS_IDX_SHIFT 16
+
+/* TX Virtual Queue Mapping Control Register */
+#define IPQESS_REG_VQ_CTRL0 0x4A0
+#define IPQESS_REG_VQ_CTRL1 0x4A4
+
+/* Virtual QID shift, it takes queue as input, and computes
+ * Virtual QID position in virtual qid control register
+ */
+#define IPQESS_VQ_ID_SHIFT(i) (((i) * 3) % 24)
+
+/* Virtual Queue Default Value */
+#define IPQESS_VQ_REG_VALUE 0x240240
+
+/* Tx side Port Interface Control Register */
+#define IPQESS_REG_PORT_CTRL 0x4A8
+#define IPQESS_PAD_EN_SHIFT 15
+
+/* Tx side VLAN Configuration Register */
+#define IPQESS_REG_VLAN_CFG 0x4AC
+
+#define IPQESS_VLAN_CFG_SVLAN_TPID_SHIFT 0
+#define IPQESS_VLAN_CFG_SVLAN_TPID_MASK 0xffff
+#define IPQESS_VLAN_CFG_CVLAN_TPID_SHIFT 16
+#define IPQESS_VLAN_CFG_CVLAN_TPID_MASK 0xffff
+
+#define IPQESS_TX_CVLAN 16
+#define IPQESS_TX_INS_CVLAN 17
+#define IPQESS_TX_CVLAN_TAG_SHIFT 0
+
+#define IPQESS_TX_SVLAN 14
+#define IPQESS_TX_INS_SVLAN 15
+#define IPQESS_TX_SVLAN_TAG_SHIFT 16
+
+/* Tx Queue Packet Statistic Register */
+#define IPQESS_REG_TX_STAT_PKT_Q(x) (0x700 + ((x) << 3)) /* x = queue id */
+
+#define IPQESS_TX_STAT_PKT_MASK 0xFFFFFF
+
+/* Tx Queue Byte Statistic Register */
+#define IPQESS_REG_TX_STAT_BYTE_Q(x) (0x704 + ((x) << 3)) /* x = queue id */
+
+/* Load Balance Based Ring Offset Register */
+#define IPQESS_REG_LB_RING 0x800
+#define IPQESS_LB_RING_ENTRY_MASK 0xff
+#define IPQESS_LB_RING_ID_MASK 0x7
+#define IPQESS_LB_RING_PROFILE_ID_MASK 0x3
+#define IPQESS_LB_RING_ENTRY_BIT_OFFSET 8
+#define IPQESS_LB_RING_ID_OFFSET 0
+#define IPQESS_LB_RING_PROFILE_ID_OFFSET 3
+#define IPQESS_LB_REG_VALUE 0x6040200
+
+/* Load Balance Priority Mapping Register */
+#define IPQESS_REG_LB_PRI_START 0x804
+#define IPQESS_REG_LB_PRI_END 0x810
+#define IPQESS_LB_PRI_REG_INC 4
+#define IPQESS_LB_PRI_ENTRY_BIT_OFFSET 4
+#define IPQESS_LB_PRI_ENTRY_MASK 0xf
+
+/* RSS Priority Mapping Register */
+#define IPQESS_REG_RSS_PRI 0x820
+#define IPQESS_RSS_PRI_ENTRY_MASK 0xf
+#define IPQESS_RSS_RING_ID_MASK 0x7
+#define IPQESS_RSS_PRI_ENTRY_BIT_OFFSET 4
+
+/* RSS Indirection Register */
+#define IPQESS_REG_RSS_IDT(x) (0x840 + ((x) << 2)) /* x = No. of indirection table */
+#define IPQESS_NUM_IDT 16
+#define IPQESS_RSS_IDT_VALUE 0x64206420
+
+/* Default RSS Ring Register */
+#define IPQESS_REG_DEF_RSS 0x890
+#define IPQESS_DEF_RSS_MASK 0x7
+
+/* RSS Hash Function Type Register */
+#define IPQESS_REG_RSS_TYPE 0x894
+#define IPQESS_RSS_TYPE_NONE 0x01
+#define IPQESS_RSS_TYPE_IPV4TCP 0x02
+#define IPQESS_RSS_TYPE_IPV6_TCP 0x04
+#define IPQESS_RSS_TYPE_IPV4_UDP 0x08
+#define IPQESS_RSS_TYPE_IPV6UDP 0x10
+#define IPQESS_RSS_TYPE_IPV4 0x20
+#define IPQESS_RSS_TYPE_IPV6 0x40
+#define IPQESS_RSS_HASH_MODE_MASK 0x7f
+
+#define IPQESS_REG_RSS_HASH_VALUE 0x8C0
+
+#define IPQESS_REG_RSS_TYPE_RESULT 0x8C4
+
+#define IPQESS_HASH_TYPE_START 0
+#define IPQESS_HASH_TYPE_END 5
+#define IPQESS_HASH_TYPE_SHIFT 12
+
+#define IPQESS_RFS_FLOW_ENTRIES 1024
+#define IPQESS_RFS_FLOW_ENTRIES_MASK (IPQESS_RFS_FLOW_ENTRIES - 1)
+#define IPQESS_RFS_EXPIRE_COUNT_PER_CALL 128
+
+/* RFD Base Address Register */
+#define IPQESS_REG_RFD_BASE_ADDR_Q(x) (0x950 + ((x) << 2)) /* x = queue id */
+
+/* RFD Index Register */
+#define IPQESS_REG_RFD_IDX_Q(x) (0x9B0 + ((x) << 2)) /* x = queue id */
+
+#define IPQESS_RFD_PROD_IDX_BITS 0x00000FFF
+#define IPQESS_RFD_CONS_IDX_BITS 0x0FFF0000
+#define IPQESS_RFD_PROD_IDX_MASK 0xFFF
+#define IPQESS_RFD_CONS_IDX_MASK 0xFFF
+#define IPQESS_RFD_PROD_IDX_SHIFT 0
+#define IPQESS_RFD_CONS_IDX_SHIFT 16
+
+/* Rx Descriptor Control Register */
+#define IPQESS_REG_RX_DESC0 0xA10
+#define IPQESS_RFD_RING_SIZE_MASK 0xFFF
+#define IPQESS_RX_BUF_SIZE_MASK 0xFFFF
+#define IPQESS_RFD_RING_SIZE_SHIFT 0
+#define IPQESS_RX_BUF_SIZE_SHIFT 16
+
+#define IPQESS_REG_RX_DESC1 0xA14
+#define IPQESS_RXQ_RFD_BURST_NUM_MASK 0x3F
+#define IPQESS_RXQ_RFD_PF_THRESH_MASK 0x1F
+#define IPQESS_RXQ_RFD_LOW_THRESH_MASK 0xFFF
+#define IPQESS_RXQ_RFD_BURST_NUM_SHIFT 0
+#define IPQESS_RXQ_RFD_PF_THRESH_SHIFT 8
+#define IPQESS_RXQ_RFD_LOW_THRESH_SHIFT 16
+
+/* RXQ Control Register */
+#define IPQESS_REG_RXQ_CTRL 0xA18
+#define IPQESS_FIFO_THRESH_TYPE_SHIF 0
+#define IPQESS_FIFO_THRESH_128_BYTE 0x0
+#define IPQESS_FIFO_THRESH_64_BYTE 0x1
+#define IPQESS_RXQ_CTRL_RMV_VLAN 0x00000002
+#define IPQESS_RXQ_CTRL_EN_MASK GENMASK(15, 8)
+#define IPQESS_RXQ_CTRL_EN(__qid) BIT(8 + (__qid))
+
+/* AXI Burst Size Config */
+#define IPQESS_REG_AXIW_CTRL_MAXWRSIZE 0xA1C
+#define IPQESS_AXIW_MAXWRSIZE_VALUE 0x0
+
+/* Rx Statistics Register */
+#define IPQESS_REG_RX_STAT_BYTE_Q(x) (0xA30 + ((x) << 2)) /* x = queue id */
+#define IPQESS_REG_RX_STAT_PKT_Q(x) (0xA50 + ((x) << 2)) /* x = queue id */
+
+/* WoL Pattern Length Register */
+#define IPQESS_REG_WOL_PATTERN_LEN0 0xC00
+#define IPQESS_WOL_PT_LEN_MASK 0xFF
+#define IPQESS_WOL_PT0_LEN_SHIFT 0
+#define IPQESS_WOL_PT1_LEN_SHIFT 8
+#define IPQESS_WOL_PT2_LEN_SHIFT 16
+#define IPQESS_WOL_PT3_LEN_SHIFT 24
+
+#define IPQESS_REG_WOL_PATTERN_LEN1 0xC04
+#define IPQESS_WOL_PT4_LEN_SHIFT 0
+#define IPQESS_WOL_PT5_LEN_SHIFT 8
+#define IPQESS_WOL_PT6_LEN_SHIFT 16
+
+/* WoL Control Register */
+#define IPQESS_REG_WOL_CTRL 0xC08
+#define IPQESS_WOL_WK_EN 0x00000001
+#define IPQESS_WOL_MG_EN 0x00000002
+#define IPQESS_WOL_PT0_EN 0x00000004
+#define IPQESS_WOL_PT1_EN 0x00000008
+#define IPQESS_WOL_PT2_EN 0x00000010
+#define IPQESS_WOL_PT3_EN 0x00000020
+#define IPQESS_WOL_PT4_EN 0x00000040
+#define IPQESS_WOL_PT5_EN 0x00000080
+#define IPQESS_WOL_PT6_EN 0x00000100
+
+/* MAC Control Register */
+#define IPQESS_REG_MAC_CTRL0 0xC20
+#define IPQESS_REG_MAC_CTRL1 0xC24
+
+/* WoL Pattern Register */
+#define IPQESS_REG_WOL_PATTERN_START 0x5000
+#define IPQESS_PATTERN_PART_REG_OFFSET 0x40
+
+
+/* TX descriptor fields */
+#define IPQESS_TPD_HDR_SHIFT 0
+#define IPQESS_TPD_PPPOE_EN 0x00000100
+#define IPQESS_TPD_IP_CSUM_EN 0x00000200
+#define IPQESS_TPD_TCP_CSUM_EN 0x0000400
+#define IPQESS_TPD_UDP_CSUM_EN 0x00000800
+#define IPQESS_TPD_CUSTOM_CSUM_EN 0x00000C00
+#define IPQESS_TPD_LSO_EN 0x00001000
+#define IPQESS_TPD_LSO_V2_EN 0x00002000
+/* The VLAN_TAGGED bit is not used in the publicly available
+ * drivers. The definition has been stolen from the Atheros
+ * 'alx' driver (drivers/net/ethernet/atheros/alx/hw.h). It
+ * seems that it has the same meaning in regard to the EDMA
+ * hardware.
+ */
+#define IPQESS_TPD_VLAN_TAGGED 0x00004000
+#define IPQESS_TPD_IPV4_EN 0x00010000
+#define IPQESS_TPD_MSS_MASK 0x1FFF
+#define IPQESS_TPD_MSS_SHIFT 18
+#define IPQESS_TPD_CUSTOM_CSUM_SHIFT 18
+
+/* RRD descriptor fields */
+#define IPQESS_RRD_NUM_RFD_MASK 0x000F
+#define IPQESS_RRD_PKT_SIZE_MASK 0x3FFF
+#define IPQESS_RRD_SRC_PORT_NUM_MASK 0x4000
+#define IPQESS_RRD_SVLAN 0x8000
+#define IPQESS_RRD_FLOW_COOKIE_MASK 0x07FF;
+
+#define IPQESS_RRD_PKT_SIZE_MASK 0x3FFF
+#define IPQESS_RRD_CSUM_FAIL_MASK 0xC000
+#define IPQESS_RRD_CVLAN 0x0001
+#define IPQESS_RRD_DESC_VALID 0x8000
+
+#define IPQESS_RRD_PRIORITY_SHIFT 4
+#define IPQESS_RRD_PRIORITY_MASK 0x7
+#define IPQESS_RRD_PORT_TYPE_SHIFT 7
+#define IPQESS_RRD_PORT_TYPE_MASK 0x1F
+
+#endif
--- /dev/null
+++ b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/ipqess/ipqess_ethtool.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: (GPL-2.0 OR ISC)
+/* Copyright (c) 2015 - 2016, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2017 - 2018, John Crispin <john@phrozen.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all copies.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/ethtool.h>
+#include <linux/netdevice.h>
+#include <linux/string.h>
+#include <linux/phylink.h>
+
+#include "ipqess.h"
+
+struct ipqesstool_stats {
+ uint8_t string[ETH_GSTRING_LEN];
+ uint32_t offset;
+};
+
+#define IPQESS_STAT(m) offsetof(struct ipqesstool_statistics, m)
+#define DRVINFO_LEN 32
+
+static const struct ipqesstool_stats ipqess_stats[] = {
+ {"tx_q0_pkt", IPQESS_STAT(tx_q0_pkt)},
+ {"tx_q1_pkt", IPQESS_STAT(tx_q1_pkt)},
+ {"tx_q2_pkt", IPQESS_STAT(tx_q2_pkt)},
+ {"tx_q3_pkt", IPQESS_STAT(tx_q3_pkt)},
+ {"tx_q4_pkt", IPQESS_STAT(tx_q4_pkt)},
+ {"tx_q5_pkt", IPQESS_STAT(tx_q5_pkt)},
+ {"tx_q6_pkt", IPQESS_STAT(tx_q6_pkt)},
+ {"tx_q7_pkt", IPQESS_STAT(tx_q7_pkt)},
+ {"tx_q8_pkt", IPQESS_STAT(tx_q8_pkt)},
+ {"tx_q9_pkt", IPQESS_STAT(tx_q9_pkt)},
+ {"tx_q10_pkt", IPQESS_STAT(tx_q10_pkt)},
+ {"tx_q11_pkt", IPQESS_STAT(tx_q11_pkt)},
+ {"tx_q12_pkt", IPQESS_STAT(tx_q12_pkt)},
+ {"tx_q13_pkt", IPQESS_STAT(tx_q13_pkt)},
+ {"tx_q14_pkt", IPQESS_STAT(tx_q14_pkt)},
+ {"tx_q15_pkt", IPQESS_STAT(tx_q15_pkt)},
+ {"tx_q0_byte", IPQESS_STAT(tx_q0_byte)},
+ {"tx_q1_byte", IPQESS_STAT(tx_q1_byte)},
+ {"tx_q2_byte", IPQESS_STAT(tx_q2_byte)},
+ {"tx_q3_byte", IPQESS_STAT(tx_q3_byte)},
+ {"tx_q4_byte", IPQESS_STAT(tx_q4_byte)},
+ {"tx_q5_byte", IPQESS_STAT(tx_q5_byte)},
+ {"tx_q6_byte", IPQESS_STAT(tx_q6_byte)},
+ {"tx_q7_byte", IPQESS_STAT(tx_q7_byte)},
+ {"tx_q8_byte", IPQESS_STAT(tx_q8_byte)},
+ {"tx_q9_byte", IPQESS_STAT(tx_q9_byte)},
+ {"tx_q10_byte", IPQESS_STAT(tx_q10_byte)},
+ {"tx_q11_byte", IPQESS_STAT(tx_q11_byte)},
+ {"tx_q12_byte", IPQESS_STAT(tx_q12_byte)},
+ {"tx_q13_byte", IPQESS_STAT(tx_q13_byte)},
+ {"tx_q14_byte", IPQESS_STAT(tx_q14_byte)},
+ {"tx_q15_byte", IPQESS_STAT(tx_q15_byte)},
+ {"rx_q0_pkt", IPQESS_STAT(rx_q0_pkt)},
+ {"rx_q1_pkt", IPQESS_STAT(rx_q1_pkt)},
+ {"rx_q2_pkt", IPQESS_STAT(rx_q2_pkt)},
+ {"rx_q3_pkt", IPQESS_STAT(rx_q3_pkt)},
+ {"rx_q4_pkt", IPQESS_STAT(rx_q4_pkt)},
+ {"rx_q5_pkt", IPQESS_STAT(rx_q5_pkt)},
+ {"rx_q6_pkt", IPQESS_STAT(rx_q6_pkt)},
+ {"rx_q7_pkt", IPQESS_STAT(rx_q7_pkt)},
+ {"rx_q0_byte", IPQESS_STAT(rx_q0_byte)},
+ {"rx_q1_byte", IPQESS_STAT(rx_q1_byte)},
+ {"rx_q2_byte", IPQESS_STAT(rx_q2_byte)},
+ {"rx_q3_byte", IPQESS_STAT(rx_q3_byte)},
+ {"rx_q4_byte", IPQESS_STAT(rx_q4_byte)},
+ {"rx_q5_byte", IPQESS_STAT(rx_q5_byte)},
+ {"rx_q6_byte", IPQESS_STAT(rx_q6_byte)},
+ {"rx_q7_byte", IPQESS_STAT(rx_q7_byte)},
+ {"tx_desc_error", IPQESS_STAT(tx_desc_error)},
+};
+
+static int ipqess_get_strset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return ARRAY_SIZE(ipqess_stats);
+ default:
+ netdev_dbg(netdev, "%s: Invalid string set", __func__);
+ return -EOPNOTSUPP;
+ }
+}
+
+static void ipqess_get_strings(struct net_device *netdev, uint32_t stringset,
+ uint8_t *data)
+{
+ uint8_t *p = data;
+ uint32_t i;
+
+ switch (stringset) {
+ case ETH_SS_STATS:
+ for (i = 0; i < ARRAY_SIZE(ipqess_stats); i++) {
+ memcpy(p, ipqess_stats[i].string,
+ min((size_t)ETH_GSTRING_LEN,
+ strlen(ipqess_stats[i].string) + 1));
+ p += ETH_GSTRING_LEN;
+ }
+ break;
+ }
+}
+
+static void ipqess_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats,
+ uint64_t *data)
+{
+ struct ipqess *ess = netdev_priv(netdev);
+ u32 *essstats = (u32 *)&ess->ipqessstats;
+ int i;
+
+ spin_lock(&ess->stats_lock);
+
+ ipqess_update_hw_stats(ess);
+
+ for (i = 0; i < ARRAY_SIZE(ipqess_stats); i++)
+ data[i] = *(u32 *)(essstats + (ipqess_stats[i].offset / sizeof(u32)));
+
+ spin_unlock(&ess->stats_lock);
+}
+
+static void ipqess_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strlcpy(info->driver, "qca_ipqess", DRVINFO_LEN);
+ strlcpy(info->bus_info, "axi", ETHTOOL_BUSINFO_LEN);
+}
+
+static int ipqess_get_settings(struct net_device *netdev,
+ struct ethtool_link_ksettings *cmd)
+{
+ struct ipqess *ess = netdev_priv(netdev);
+
+ return phylink_ethtool_ksettings_get(ess->phylink, cmd);
+}
+
+static int ipqess_set_settings(struct net_device *netdev,
+ const struct ethtool_link_ksettings *cmd)
+{
+ struct ipqess *ess = netdev_priv(netdev);
+
+ return phylink_ethtool_ksettings_set(ess->phylink, cmd);
+}
+
+static void ipqess_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ ring->tx_max_pending = IPQESS_TX_RING_SIZE;
+ ring->rx_max_pending = IPQESS_RX_RING_SIZE;
+}
+
+static const struct ethtool_ops ipqesstool_ops = {
+ .get_drvinfo = &ipqess_get_drvinfo,
+ .get_link = &ethtool_op_get_link,
+ .get_link_ksettings = &ipqess_get_settings,
+ .set_link_ksettings = &ipqess_set_settings,
+ .get_strings = &ipqess_get_strings,
+ .get_sset_count = &ipqess_get_strset_count,
+ .get_ethtool_stats = &ipqess_get_ethtool_stats,
+ .get_ringparam = ipqess_get_ringparam,
+};
+
+void ipqess_set_ethtool_ops(struct net_device *netdev)
+{
+ netdev->ethtool_ops = &ipqesstool_ops;
+}
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.10/702-net-ethernet-qualcomm-add-IPQESS-support.patch
@@ -0,0 +1,43 @@
+From 4f488235f498db43f2412116dea6e02c7fb20216 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Mon, 1 Nov 2021 12:36:51 +0100
+Subject: [PATCH] net: ethernet: qualcomm: add IPQESS support
+
+Allow compiling the IPQESS driver that supports the
+Qualcomm IPQ40xx SoC built-in ethernet controller.
+
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+---
+ drivers/net/ethernet/qualcomm/Kconfig | 11 +++++++++++
+ drivers/net/ethernet/qualcomm/Makefile | 1 +
+ 2 files changed, 12 insertions(+)
+
+--- a/drivers/net/ethernet/qualcomm/Kconfig
++++ b/drivers/net/ethernet/qualcomm/Kconfig
+@@ -60,6 +60,17 @@ config QCOM_EMAC
+ low power, Receive-Side Scaling (RSS), and IEEE 1588-2008
+ Precision Clock Synchronization Protocol.
+
++config QCOM_IPQ4019_ESS_EDMA
++ tristate "Qualcomm Atheros IPQ4019 ESS EDMA support"
++ depends on OF
++ select PHYLINK
++ help
++ This driver supports the Qualcomm Atheros IPQ40xx built-in
++ ESS EDMA ethernet controller.
++
++ To compile this driver as a module, choose M here: the
++ module will be called ipqess.
++
+ source "drivers/net/ethernet/qualcomm/rmnet/Kconfig"
+
+ endif # NET_VENDOR_QUALCOMM
+--- a/drivers/net/ethernet/qualcomm/Makefile
++++ b/drivers/net/ethernet/qualcomm/Makefile
+@@ -10,5 +10,6 @@ obj-$(CONFIG_QCA7000_UART) += qcauart.o
+ qcauart-objs := qca_uart.o
+
+ obj-y += emac/
++obj-y += ipqess/
+
+ obj-$(CONFIG_RMNET) += rmnet/
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.10/703-arm-dts-ipq4019-add-ethernet-controller-DT-node.patch
@@ -0,0 +1,81 @@
+From 44327d7098d4f32c24ec8c528e5aff6e030956bc Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Wed, 20 Oct 2021 13:21:45 +0200
+Subject: [PATCH] arm: dts: ipq4019: add ethernet controller DT node
+
+Since IPQ40xx SoC built-in ethernet controller now has a driver,
+add its DT node so it can be used.
+
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 48 +++++++++++++++++++++++++++++
+ 1 file changed, 48 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -38,6 +38,7 @@
+ spi1 = &blsp1_spi2;
+ i2c0 = &blsp1_i2c3;
+ i2c1 = &blsp1_i2c4;
++ ethernet0 = &gmac0;
+ };
+
+ cpus {
+@@ -589,6 +590,57 @@
+ status = "disabled";
+ };
+
++ gmac0: ethernet@c080000 {
++ compatible = "qcom,ipq4019-ess-edma";
++ reg = <0xc080000 0x8000>;
++ resets = <&gcc ESS_RESET>;
++ reset-names = "ess_rst";
++ clocks = <&gcc GCC_ESS_CLK>;
++ clock-names = "ess_clk";
++ interrupts = <GIC_SPI 65 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 69 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 71 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 77 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 240 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 242 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 243 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 244 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 245 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 246 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 248 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 251 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 252 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 253 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 254 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 255 IRQ_TYPE_EDGE_RISING>;
++
++ status = "disabled";
++
++ phy-mode = "internal";
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ pause;
++ asym-pause;
++ };
++ };
++
+ mdio: mdio@90000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
--- a/target/linux/ipq40xx/patches-5.10/708-arm-dts-ipq4019-QCA807x-properties.patch
+++ b/target/linux/ipq40xx/patches-5.10/708-arm-dts-ipq4019-QCA807x-properties.patch
@@ -20,7 +20,7 @@ Signed-off-by: Robert Marko <robert.marko@sartura.hr>
/ {
#address-cells = <1>;
-@@ -598,22 +599,39 @@
+@@ -645,22 +646,39 @@
ethphy0: ethernet-phy@0 {
reg = <0>;
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.15/702-net-ethernet-qualcomm-add-IPQESS-support.patch
@@ -0,0 +1,43 @@
+From 4f488235f498db43f2412116dea6e02c7fb20216 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Mon, 1 Nov 2021 12:36:51 +0100
+Subject: [PATCH] net: ethernet: qualcomm: add IPQESS support
+
+Allow compiling the IPQESS driver that supports the
+Qualcomm IPQ40xx SoC built-in ethernet controller.
+
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+---
+ drivers/net/ethernet/qualcomm/Kconfig | 11 +++++++++++
+ drivers/net/ethernet/qualcomm/Makefile | 1 +
+ 2 files changed, 12 insertions(+)
+
+--- a/drivers/net/ethernet/qualcomm/Kconfig
++++ b/drivers/net/ethernet/qualcomm/Kconfig
+@@ -60,6 +60,17 @@ config QCOM_EMAC
+ low power, Receive-Side Scaling (RSS), and IEEE 1588-2008
+ Precision Clock Synchronization Protocol.
+
++config QCOM_IPQ4019_ESS_EDMA
++ tristate "Qualcomm Atheros IPQ4019 ESS EDMA support"
++ depends on OF
++ select PHYLINK
++ help
++ This driver supports the Qualcomm Atheros IPQ40xx built-in
++ ESS EDMA ethernet controller.
++
++ To compile this driver as a module, choose M here: the
++ module will be called ipqess.
++
+ source "drivers/net/ethernet/qualcomm/rmnet/Kconfig"
+
+ endif # NET_VENDOR_QUALCOMM
+--- a/drivers/net/ethernet/qualcomm/Makefile
++++ b/drivers/net/ethernet/qualcomm/Makefile
+@@ -10,5 +10,6 @@ obj-$(CONFIG_QCA7000_UART) += qcauart.o
+ qcauart-objs := qca_uart.o
+
+ obj-y += emac/
++obj-y += ipqess/
+
+ obj-$(CONFIG_RMNET) += rmnet/
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.15/703-arm-dts-ipq4019-add-ethernet-controller-DT-node.patch
@@ -0,0 +1,81 @@
+From 44327d7098d4f32c24ec8c528e5aff6e030956bc Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Wed, 20 Oct 2021 13:21:45 +0200
+Subject: [PATCH] arm: dts: ipq4019: add ethernet controller DT node
+
+Since IPQ40xx SoC built-in ethernet controller now has a driver,
+add its DT node so it can be used.
+
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 48 +++++++++++++++++++++++++++++
+ 1 file changed, 48 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -38,6 +38,7 @@
+ spi1 = &blsp1_spi2;
+ i2c0 = &blsp1_i2c3;
+ i2c1 = &blsp1_i2c4;
++ ethernet0 = &gmac0;
+ };
+
+ cpus {
+@@ -589,6 +590,57 @@
+ status = "disabled";
+ };
+
++ gmac0: ethernet@c080000 {
++ compatible = "qcom,ipq4019-ess-edma";
++ reg = <0xc080000 0x8000>;
++ resets = <&gcc ESS_RESET>;
++ reset-names = "ess_rst";
++ clocks = <&gcc GCC_ESS_CLK>;
++ clock-names = "ess_clk";
++ interrupts = <GIC_SPI 65 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 69 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 71 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 77 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 240 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 242 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 243 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 244 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 245 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 246 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 248 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 251 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 252 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 253 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 254 IRQ_TYPE_EDGE_RISING>,
++ <GIC_SPI 255 IRQ_TYPE_EDGE_RISING>;
++
++ status = "disabled";
++
++ phy-mode = "internal";
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ pause;
++ asym-pause;
++ };
++ };
++
+ mdio: mdio@90000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.10/704-net-phy-define-PSGMII-PHY-interface-mode.patch
@@ -0,0 +1,61 @@
+From 3e1825e00dafb68eec25df389b63f3ab3d905b59 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <j4g8y7@gmail.com>
+Date: Fri, 25 Dec 2020 08:02:47 +0100
+Subject: [PATCH] net: phy: define PSGMII PHY interface mode
+
+The PSGMII interface is similar to QSGMII. The main difference
+is that the PSGMII interface combines five SGMII lines into a
+single link while in QSGMII only four lines are combined.
+
+Similarly to the QSGMII, this interface mode might also needs
+special handling within the MAC driver.
+
+Add definitions for the PHY layer to allow to express this type
+of connection between the MAC and PHY.
+
+Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
+---
+ Documentation/devicetree/bindings/net/ethernet-controller.yaml | 1 +
+ drivers/net/phy/phylink.c | 1 +
+ include/linux/phy.h | 3 +++
+ 3 files changed, 5 insertions(+)
+
+--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
++++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+@@ -64,6 +64,7 @@ properties:
+ - mii
+ - gmii
+ - sgmii
++ - psgmii
+ - qsgmii
+ - tbi
+ - rev-mii
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -289,6 +289,7 @@ static int phylink_parse_mode(struct phy
+
+ switch (pl->link_config.interface) {
+ case PHY_INTERFACE_MODE_SGMII:
++ case PHY_INTERFACE_MODE_PSGMII:
+ case PHY_INTERFACE_MODE_QSGMII:
+ phylink_set(pl->supported, 10baseT_Half);
+ phylink_set(pl->supported, 10baseT_Full);
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -134,6 +134,7 @@ typedef enum {
+ PHY_INTERFACE_MODE_XGMII,
+ PHY_INTERFACE_MODE_XLGMII,
+ PHY_INTERFACE_MODE_MOCA,
++ PHY_INTERFACE_MODE_PSGMII,
+ PHY_INTERFACE_MODE_QSGMII,
+ PHY_INTERFACE_MODE_TRGMII,
+ PHY_INTERFACE_MODE_100BASEX,
+@@ -201,6 +202,8 @@ static inline const char *phy_modes(phy_
+ return "xlgmii";
+ case PHY_INTERFACE_MODE_MOCA:
+ return "moca";
++ case PHY_INTERFACE_MODE_PSGMII:
++ return "psgmii";
+ case PHY_INTERFACE_MODE_QSGMII:
+ return "qsgmii";
+ case PHY_INTERFACE_MODE_TRGMII:
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.15/704-net-phy-define-PSGMII-PHY-interface-mode.patch
@@ -0,0 +1,61 @@
+From 3e1825e00dafb68eec25df389b63f3ab3d905b59 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <j4g8y7@gmail.com>
+Date: Fri, 25 Dec 2020 08:02:47 +0100
+Subject: [PATCH] net: phy: define PSGMII PHY interface mode
+
+The PSGMII interface is similar to QSGMII. The main difference
+is that the PSGMII interface combines five SGMII lines into a
+single link while in QSGMII only four lines are combined.
+
+Similarly to the QSGMII, this interface mode might also needs
+special handling within the MAC driver.
+
+Add definitions for the PHY layer to allow to express this type
+of connection between the MAC and PHY.
+
+Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
+---
+ Documentation/devicetree/bindings/net/ethernet-controller.yaml | 1 +
+ drivers/net/phy/phylink.c | 1 +
+ include/linux/phy.h | 3 +++
+ 3 files changed, 5 insertions(+)
+
+--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
++++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+@@ -64,6 +64,7 @@ properties:
+ - mii
+ - gmii
+ - sgmii
++ - psgmii
+ - qsgmii
+ - tbi
+ - rev-mii
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -293,6 +293,7 @@ static int phylink_parse_mode(struct phy
+
+ switch (pl->link_config.interface) {
+ case PHY_INTERFACE_MODE_SGMII:
++ case PHY_INTERFACE_MODE_PSGMII:
+ case PHY_INTERFACE_MODE_QSGMII:
+ phylink_set(pl->supported, 10baseT_Half);
+ phylink_set(pl->supported, 10baseT_Full);
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -138,6 +138,7 @@ typedef enum {
+ PHY_INTERFACE_MODE_XGMII,
+ PHY_INTERFACE_MODE_XLGMII,
+ PHY_INTERFACE_MODE_MOCA,
++ PHY_INTERFACE_MODE_PSGMII,
+ PHY_INTERFACE_MODE_QSGMII,
+ PHY_INTERFACE_MODE_TRGMII,
+ PHY_INTERFACE_MODE_100BASEX,
+@@ -209,6 +210,8 @@ static inline const char *phy_modes(phy_
+ return "xlgmii";
+ case PHY_INTERFACE_MODE_MOCA:
+ return "moca";
++ case PHY_INTERFACE_MODE_PSGMII:
++ return "psgmii";
+ case PHY_INTERFACE_MODE_QSGMII:
+ return "qsgmii";
+ case PHY_INTERFACE_MODE_TRGMII:
--- /dev/null
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
@@ -0,0 +1,2190 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2015, 2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2016 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+#include <net/dsa.h>
+#include <linux/of_net.h>
+#include <linux/of_mdio.h>
+#include <linux/of_platform.h>
+#include <linux/if_bridge.h>
+#include <linux/mdio.h>
+#include <linux/phylink.h>
+#include <linux/gpio/consumer.h>
+#include <linux/etherdevice.h>
+
+#include "qca8k.h"
+
+#define MIB_DESC(_s, _o, _n) \
+ { \
+ .size = (_s), \
+ .offset = (_o), \
+ .name = (_n), \
+ }
+
+static const struct qca8k_mib_desc ar8327_mib[] = {
+ MIB_DESC(1, 0x00, "RxBroad"),
+ MIB_DESC(1, 0x04, "RxPause"),
+ MIB_DESC(1, 0x08, "RxMulti"),
+ MIB_DESC(1, 0x0c, "RxFcsErr"),
+ MIB_DESC(1, 0x10, "RxAlignErr"),
+ MIB_DESC(1, 0x14, "RxRunt"),
+ MIB_DESC(1, 0x18, "RxFragment"),
+ MIB_DESC(1, 0x1c, "Rx64Byte"),
+ MIB_DESC(1, 0x20, "Rx128Byte"),
+ MIB_DESC(1, 0x24, "Rx256Byte"),
+ MIB_DESC(1, 0x28, "Rx512Byte"),
+ MIB_DESC(1, 0x2c, "Rx1024Byte"),
+ MIB_DESC(1, 0x30, "Rx1518Byte"),
+ MIB_DESC(1, 0x34, "RxMaxByte"),
+ MIB_DESC(1, 0x38, "RxTooLong"),
+ MIB_DESC(2, 0x3c, "RxGoodByte"),
+ MIB_DESC(2, 0x44, "RxBadByte"),
+ MIB_DESC(1, 0x4c, "RxOverFlow"),
+ MIB_DESC(1, 0x50, "Filtered"),
+ MIB_DESC(1, 0x54, "TxBroad"),
+ MIB_DESC(1, 0x58, "TxPause"),
+ MIB_DESC(1, 0x5c, "TxMulti"),
+ MIB_DESC(1, 0x60, "TxUnderRun"),
+ MIB_DESC(1, 0x64, "Tx64Byte"),
+ MIB_DESC(1, 0x68, "Tx128Byte"),
+ MIB_DESC(1, 0x6c, "Tx256Byte"),
+ MIB_DESC(1, 0x70, "Tx512Byte"),
+ MIB_DESC(1, 0x74, "Tx1024Byte"),
+ MIB_DESC(1, 0x78, "Tx1518Byte"),
+ MIB_DESC(1, 0x7c, "TxMaxByte"),
+ MIB_DESC(1, 0x80, "TxOverSize"),
+ MIB_DESC(2, 0x84, "TxByte"),
+ MIB_DESC(1, 0x8c, "TxCollision"),
+ MIB_DESC(1, 0x90, "TxAbortCol"),
+ MIB_DESC(1, 0x94, "TxMultiCol"),
+ MIB_DESC(1, 0x98, "TxSingleCol"),
+ MIB_DESC(1, 0x9c, "TxExcDefer"),
+ MIB_DESC(1, 0xa0, "TxDefer"),
+ MIB_DESC(1, 0xa4, "TxLateCol"),
+};
+
+/* The 32bit switch registers are accessed indirectly. To achieve this we need
+ * to set the page of the register. Track the last page that was set to reduce
+ * mdio writes
+ */
+static u16 qca8k_current_page = 0xffff;
+
+static void
+qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
+{
+ regaddr >>= 1;
+ *r1 = regaddr & 0x1e;
+
+ regaddr >>= 5;
+ *r2 = regaddr & 0x7;
+
+ regaddr >>= 3;
+ *page = regaddr & 0x3ff;
+}
+
+static int
+qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val)
+{
+ int ret;
+
+ ret = bus->read(bus, phy_id, regnum);
+ if (ret >= 0) {
+ *val = ret;
+ ret = bus->read(bus, phy_id, regnum + 1);
+ *val |= ret << 16;
+ }
+
+ if (ret < 0) {
+ dev_err_ratelimited(&bus->dev,
+ "failed to read qca8k 32bit register\n");
+ *val = 0;
+ return ret;
+ }
+
+ return 0;
+}
+
+static void
+qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val)
+{
+ u16 lo, hi;
+ int ret;
+
+ lo = val & 0xffff;
+ hi = (u16)(val >> 16);
+
+ ret = bus->write(bus, phy_id, regnum, lo);
+ if (ret >= 0)
+ ret = bus->write(bus, phy_id, regnum + 1, hi);
+ if (ret < 0)
+ dev_err_ratelimited(&bus->dev,
+ "failed to write qca8k 32bit register\n");
+}
+
+static int
+qca8k_set_page(struct mii_bus *bus, u16 page)
+{
+ int ret;
+
+ if (page == qca8k_current_page)
+ return 0;
+
+ ret = bus->write(bus, 0x18, 0, page);
+ if (ret < 0) {
+ dev_err_ratelimited(&bus->dev,
+ "failed to set qca8k page\n");
+ return ret;
+ }
+
+ qca8k_current_page = page;
+ usleep_range(1000, 2000);
+ return 0;
+}
+
+static int
+qca8k_read(struct qca8k_priv *priv, u32 reg, u32 *val)
+{
+ struct mii_bus *bus = priv->bus;
+ u16 r1, r2, page;
+ int ret;
+
+ qca8k_split_addr(reg, &r1, &r2, &page);
+
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+ ret = qca8k_set_page(bus, page);
+ if (ret < 0)
+ goto exit;
+
+ ret = qca8k_mii_read32(bus, 0x10 | r2, r1, val);
+
+exit:
+ mutex_unlock(&bus->mdio_lock);
+ return ret;
+}
+
+static int
+qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val)
+{
+ struct mii_bus *bus = priv->bus;
+ u16 r1, r2, page;
+ int ret;
+
+ qca8k_split_addr(reg, &r1, &r2, &page);
+
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+ ret = qca8k_set_page(bus, page);
+ if (ret < 0)
+ goto exit;
+
+ qca8k_mii_write32(bus, 0x10 | r2, r1, val);
+
+exit:
+ mutex_unlock(&bus->mdio_lock);
+ return ret;
+}
+
+static int
+qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val)
+{
+ struct mii_bus *bus = priv->bus;
+ u16 r1, r2, page;
+ u32 val;
+ int ret;
+
+ qca8k_split_addr(reg, &r1, &r2, &page);
+
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+ ret = qca8k_set_page(bus, page);
+ if (ret < 0)
+ goto exit;
+
+ ret = qca8k_mii_read32(bus, 0x10 | r2, r1, &val);
+ if (ret < 0)
+ goto exit;
+
+ val &= ~mask;
+ val |= write_val;
+ qca8k_mii_write32(bus, 0x10 | r2, r1, val);
+
+exit:
+ mutex_unlock(&bus->mdio_lock);
+
+ return ret;
+}
+
+static int
+qca8k_reg_set(struct qca8k_priv *priv, u32 reg, u32 val)
+{
+ return qca8k_rmw(priv, reg, 0, val);
+}
+
+static int
+qca8k_reg_clear(struct qca8k_priv *priv, u32 reg, u32 val)
+{
+ return qca8k_rmw(priv, reg, val, 0);
+}
+
+static int
+qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
+
+ return qca8k_read(priv, reg, val);
+}
+
+static int
+qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
+
+ return qca8k_write(priv, reg, val);
+}
+
+static const struct regmap_range qca8k_readable_ranges[] = {
+ regmap_reg_range(0x0000, 0x00e4), /* Global control */
+ regmap_reg_range(0x0100, 0x0168), /* EEE control */
+ regmap_reg_range(0x0200, 0x0270), /* Parser control */
+ regmap_reg_range(0x0400, 0x0454), /* ACL */
+ regmap_reg_range(0x0600, 0x0718), /* Lookup */
+ regmap_reg_range(0x0800, 0x0b70), /* QM */
+ regmap_reg_range(0x0c00, 0x0c80), /* PKT */
+ regmap_reg_range(0x0e00, 0x0e98), /* L3 */
+ regmap_reg_range(0x1000, 0x10ac), /* MIB - Port0 */
+ regmap_reg_range(0x1100, 0x11ac), /* MIB - Port1 */
+ regmap_reg_range(0x1200, 0x12ac), /* MIB - Port2 */
+ regmap_reg_range(0x1300, 0x13ac), /* MIB - Port3 */
+ regmap_reg_range(0x1400, 0x14ac), /* MIB - Port4 */
+ regmap_reg_range(0x1500, 0x15ac), /* MIB - Port5 */
+ regmap_reg_range(0x1600, 0x16ac), /* MIB - Port6 */
+
+};
+
+static const struct regmap_access_table qca8k_readable_table = {
+ .yes_ranges = qca8k_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(qca8k_readable_ranges),
+};
+
+static struct regmap_config qca8k_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = 0x16ac, /* end MIB - Port6 range */
+ .reg_read = qca8k_regmap_read,
+ .reg_write = qca8k_regmap_write,
+ .rd_table = &qca8k_readable_table,
+};
+
+static int
+qca8k_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask)
+{
+ int ret, ret1;
+ u32 val;
+
+ ret = read_poll_timeout(qca8k_read, ret1, !(val & mask),
+ 0, QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false,
+ priv, reg, &val);
+
+ /* Check if qca8k_read has failed for a different reason
+ * before returning -ETIMEDOUT
+ */
+ if (ret < 0 && ret1 < 0)
+ return ret1;
+
+ return ret;
+}
+
+static int
+qca8k_fdb_read(struct qca8k_priv *priv, struct qca8k_fdb *fdb)
+{
+ u32 reg[4], val;
+ int i, ret;
+
+ /* load the ARL table into an array */
+ for (i = 0; i < 4; i++) {
+ ret = qca8k_read(priv, QCA8K_REG_ATU_DATA0 + (i * 4), &val);
+ if (ret < 0)
+ return ret;
+
+ reg[i] = val;
+ }
+
+ /* vid - 83:72 */
+ fdb->vid = (reg[2] >> QCA8K_ATU_VID_S) & QCA8K_ATU_VID_M;
+ /* aging - 67:64 */
+ fdb->aging = reg[2] & QCA8K_ATU_STATUS_M;
+ /* portmask - 54:48 */
+ fdb->port_mask = (reg[1] >> QCA8K_ATU_PORT_S) & QCA8K_ATU_PORT_M;
+ /* mac - 47:0 */
+ fdb->mac[0] = (reg[1] >> QCA8K_ATU_ADDR0_S) & 0xff;
+ fdb->mac[1] = reg[1] & 0xff;
+ fdb->mac[2] = (reg[0] >> QCA8K_ATU_ADDR2_S) & 0xff;
+ fdb->mac[3] = (reg[0] >> QCA8K_ATU_ADDR3_S) & 0xff;
+ fdb->mac[4] = (reg[0] >> QCA8K_ATU_ADDR4_S) & 0xff;
+ fdb->mac[5] = reg[0] & 0xff;
+
+ return 0;
+}
+
+static void
+qca8k_fdb_write(struct qca8k_priv *priv, u16 vid, u8 port_mask, const u8 *mac,
+ u8 aging)
+{
+ u32 reg[3] = { 0 };
+ int i;
+
+ /* vid - 83:72 */
+ reg[2] = (vid & QCA8K_ATU_VID_M) << QCA8K_ATU_VID_S;
+ /* aging - 67:64 */
+ reg[2] |= aging & QCA8K_ATU_STATUS_M;
+ /* portmask - 54:48 */
+ reg[1] = (port_mask & QCA8K_ATU_PORT_M) << QCA8K_ATU_PORT_S;
+ /* mac - 47:0 */
+ reg[1] |= mac[0] << QCA8K_ATU_ADDR0_S;
+ reg[1] |= mac[1];
+ reg[0] |= mac[2] << QCA8K_ATU_ADDR2_S;
+ reg[0] |= mac[3] << QCA8K_ATU_ADDR3_S;
+ reg[0] |= mac[4] << QCA8K_ATU_ADDR4_S;
+ reg[0] |= mac[5];
+
+ /* load the array into the ARL table */
+ for (i = 0; i < 3; i++)
+ qca8k_write(priv, QCA8K_REG_ATU_DATA0 + (i * 4), reg[i]);
+}
+
+static int
+qca8k_fdb_access(struct qca8k_priv *priv, enum qca8k_fdb_cmd cmd, int port)
+{
+ u32 reg;
+ int ret;
+
+ /* Set the command and FDB index */
+ reg = QCA8K_ATU_FUNC_BUSY;
+ reg |= cmd;
+ if (port >= 0) {
+ reg |= QCA8K_ATU_FUNC_PORT_EN;
+ reg |= (port & QCA8K_ATU_FUNC_PORT_M) << QCA8K_ATU_FUNC_PORT_S;
+ }
+
+ /* Write the function register triggering the table access */
+ ret = qca8k_write(priv, QCA8K_REG_ATU_FUNC, reg);
+ if (ret)
+ return ret;
+
+ /* wait for completion */
+ ret = qca8k_busy_wait(priv, QCA8K_REG_ATU_FUNC, QCA8K_ATU_FUNC_BUSY);
+ if (ret)
+ return ret;
+
+ /* Check for table full violation when adding an entry */
+ if (cmd == QCA8K_FDB_LOAD) {
+ ret = qca8k_read(priv, QCA8K_REG_ATU_FUNC, &reg);
+ if (ret < 0)
+ return ret;
+ if (reg & QCA8K_ATU_FUNC_FULL)
+ return -1;
+ }
+
+ return 0;
+}
+
+static int
+qca8k_fdb_next(struct qca8k_priv *priv, struct qca8k_fdb *fdb, int port)
+{
+ int ret;
+
+ qca8k_fdb_write(priv, fdb->vid, fdb->port_mask, fdb->mac, fdb->aging);
+ ret = qca8k_fdb_access(priv, QCA8K_FDB_NEXT, port);
+ if (ret < 0)
+ return ret;
+
+ return qca8k_fdb_read(priv, fdb);
+}
+
+static int
+qca8k_fdb_add(struct qca8k_priv *priv, const u8 *mac, u16 port_mask,
+ u16 vid, u8 aging)
+{
+ int ret;
+
+ mutex_lock(&priv->reg_mutex);
+ qca8k_fdb_write(priv, vid, port_mask, mac, aging);
+ ret = qca8k_fdb_access(priv, QCA8K_FDB_LOAD, -1);
+ mutex_unlock(&priv->reg_mutex);
+
+ return ret;
+}
+
+static int
+qca8k_fdb_del(struct qca8k_priv *priv, const u8 *mac, u16 port_mask, u16 vid)
+{
+ int ret;
+
+ mutex_lock(&priv->reg_mutex);
+ qca8k_fdb_write(priv, vid, port_mask, mac, 0);
+ ret = qca8k_fdb_access(priv, QCA8K_FDB_PURGE, -1);
+ mutex_unlock(&priv->reg_mutex);
+
+ return ret;
+}
+
+static void
+qca8k_fdb_flush(struct qca8k_priv *priv)
+{
+ mutex_lock(&priv->reg_mutex);
+ qca8k_fdb_access(priv, QCA8K_FDB_FLUSH, -1);
+ mutex_unlock(&priv->reg_mutex);
+}
+
+static int
+qca8k_vlan_access(struct qca8k_priv *priv, enum qca8k_vlan_cmd cmd, u16 vid)
+{
+ u32 reg;
+ int ret;
+
+ /* Set the command and VLAN index */
+ reg = QCA8K_VTU_FUNC1_BUSY;
+ reg |= cmd;
+ reg |= vid << QCA8K_VTU_FUNC1_VID_S;
+
+ /* Write the function register triggering the table access */
+ ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC1, reg);
+ if (ret)
+ return ret;
+
+ /* wait for completion */
+ ret = qca8k_busy_wait(priv, QCA8K_REG_VTU_FUNC1, QCA8K_VTU_FUNC1_BUSY);
+ if (ret)
+ return ret;
+
+ /* Check for table full violation when adding an entry */
+ if (cmd == QCA8K_VLAN_LOAD) {
+ ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC1, &reg);
+ if (ret < 0)
+ return ret;
+ if (reg & QCA8K_VTU_FUNC1_FULL)
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int
+qca8k_vlan_add(struct qca8k_priv *priv, u8 port, u16 vid, bool untagged)
+{
+ u32 reg;
+ int ret;
+
+ /*
+ We do the right thing with VLAN 0 and treat it as untagged while
+ preserving the tag on egress.
+ */
+ if (vid == 0)
+ return 0;
+
+ mutex_lock(&priv->reg_mutex);
+ ret = qca8k_vlan_access(priv, QCA8K_VLAN_READ, vid);
+ if (ret < 0)
+ goto out;
+
+ ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC0, &reg);
+ if (ret < 0)
+ goto out;
+ reg |= QCA8K_VTU_FUNC0_VALID | QCA8K_VTU_FUNC0_IVL_EN;
+ reg &= ~(QCA8K_VTU_FUNC0_EG_MODE_MASK << QCA8K_VTU_FUNC0_EG_MODE_S(port));
+ if (untagged)
+ reg |= QCA8K_VTU_FUNC0_EG_MODE_UNTAG <<
+ QCA8K_VTU_FUNC0_EG_MODE_S(port);
+ else
+ reg |= QCA8K_VTU_FUNC0_EG_MODE_TAG <<
+ QCA8K_VTU_FUNC0_EG_MODE_S(port);
+
+ ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg);
+ if (ret)
+ goto out;
+ ret = qca8k_vlan_access(priv, QCA8K_VLAN_LOAD, vid);
+
+out:
+ mutex_unlock(&priv->reg_mutex);
+
+ return ret;
+}
+
+static int
+qca8k_vlan_del(struct qca8k_priv *priv, u8 port, u16 vid)
+{
+ u32 reg, mask;
+ int ret, i;
+ bool del;
+
+ mutex_lock(&priv->reg_mutex);
+ ret = qca8k_vlan_access(priv, QCA8K_VLAN_READ, vid);
+ if (ret < 0)
+ goto out;
+
+ ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC0, &reg);
+ if (ret < 0)
+ goto out;
+ reg &= ~(3 << QCA8K_VTU_FUNC0_EG_MODE_S(port));
+ reg |= QCA8K_VTU_FUNC0_EG_MODE_NOT <<
+ QCA8K_VTU_FUNC0_EG_MODE_S(port);
+
+ /* Check if we're the last member to be removed */
+ del = true;
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ mask = QCA8K_VTU_FUNC0_EG_MODE_NOT;
+ mask <<= QCA8K_VTU_FUNC0_EG_MODE_S(i);
+
+ if ((reg & mask) != mask) {
+ del = false;
+ break;
+ }
+ }
+
+ if (del) {
+ ret = qca8k_vlan_access(priv, QCA8K_VLAN_PURGE, vid);
+ } else {
+ ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg);
+ if (ret)
+ goto out;
+ ret = qca8k_vlan_access(priv, QCA8K_VLAN_LOAD, vid);
+ }
+
+out:
+ mutex_unlock(&priv->reg_mutex);
+
+ return ret;
+}
+
+static int
+qca8k_mib_init(struct qca8k_priv *priv)
+{
+ int ret;
+
+ mutex_lock(&priv->reg_mutex);
+ ret = qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY);
+ if (ret)
+ goto exit;
+
+ ret = qca8k_busy_wait(priv, QCA8K_REG_MIB, QCA8K_MIB_BUSY);
+ if (ret)
+ goto exit;
+
+ ret = qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP);
+ if (ret)
+ goto exit;
+
+ ret = qca8k_write(priv, QCA8K_REG_MODULE_EN, QCA8K_MODULE_EN_MIB);
+
+exit:
+ mutex_unlock(&priv->reg_mutex);
+ return ret;
+}
+
+static void
+qca8k_port_set_status(struct qca8k_priv *priv, int port, int enable)
+{
+ u32 mask = QCA8K_PORT_STATUS_TXMAC | QCA8K_PORT_STATUS_RXMAC;
+
+ /* Port 0 and 6 have no internal PHY */
+ if (port > 0 && port < 6)
+ mask |= QCA8K_PORT_STATUS_LINK_AUTO;
+
+ if (enable)
+ qca8k_reg_set(priv, QCA8K_REG_PORT_STATUS(port), mask);
+ else
+ qca8k_reg_clear(priv, QCA8K_REG_PORT_STATUS(port), mask);
+}
+
+static u32
+qca8k_port_to_phy(int port)
+{
+ /* From Andrew Lunn:
+ * Port 0 has no internal phy.
+ * Port 1 has an internal PHY at MDIO address 0.
+ * Port 2 has an internal PHY at MDIO address 1.
+ * ...
+ * Port 5 has an internal PHY at MDIO address 4.
+ * Port 6 has no internal PHY.
+ */
+
+ return port - 1;
+}
+
+static int
+qca8k_mdio_busy_wait(struct mii_bus *bus, u32 reg, u32 mask)
+{
+ u16 r1, r2, page;
+ u32 val;
+ int ret, ret1;
+
+ qca8k_split_addr(reg, &r1, &r2, &page);
+
+ ret = read_poll_timeout(qca8k_mii_read32, ret1, !(val & mask), 0,
+ QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false,
+ bus, 0x10 | r2, r1, &val);
+
+ /* Check if qca8k_read has failed for a different reason
+ * before returnting -ETIMEDOUT
+ */
+ if (ret < 0 && ret1 < 0)
+ return ret1;
+
+ return ret;
+}
+
+static int
+qca8k_mdio_write(struct mii_bus *bus, int phy, int regnum, u16 data)
+{
+ u16 r1, r2, page;
+ u32 val;
+ int ret;
+
+ if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
+ return -EINVAL;
+
+ val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
+ QCA8K_MDIO_MASTER_WRITE | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
+ QCA8K_MDIO_MASTER_REG_ADDR(regnum) |
+ QCA8K_MDIO_MASTER_DATA(data);
+
+ qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page);
+
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+ ret = qca8k_set_page(bus, page);
+ if (ret)
+ goto exit;
+
+ qca8k_mii_write32(bus, 0x10 | r2, r1, val);
+
+ ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL,
+ QCA8K_MDIO_MASTER_BUSY);
+
+exit:
+ /* even if the busy_wait timeouts try to clear the MASTER_EN */
+ qca8k_mii_write32(bus, 0x10 | r2, r1, 0);
+
+ mutex_unlock(&bus->mdio_lock);
+
+ return ret;
+}
+
+static int
+qca8k_mdio_read(struct mii_bus *bus, int phy, int regnum)
+{
+ u16 r1, r2, page;
+ u32 val;
+ int ret;
+
+ if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
+ return -EINVAL;
+
+ val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
+ QCA8K_MDIO_MASTER_READ | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
+ QCA8K_MDIO_MASTER_REG_ADDR(regnum);
+
+ qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page);
+
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+ ret = qca8k_set_page(bus, page);
+ if (ret)
+ goto exit;
+
+ qca8k_mii_write32(bus, 0x10 | r2, r1, val);
+
+ ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL,
+ QCA8K_MDIO_MASTER_BUSY);
+ if (ret)
+ goto exit;
+
+ ret = qca8k_mii_read32(bus, 0x10 | r2, r1, &val);
+
+exit:
+ /* even if the busy_wait timeouts try to clear the MASTER_EN */
+ qca8k_mii_write32(bus, 0x10 | r2, r1, 0);
+
+ mutex_unlock(&bus->mdio_lock);
+
+ if (ret >= 0)
+ ret = val & QCA8K_MDIO_MASTER_DATA_MASK;
+
+ return ret;
+}
+
+static int
+qca8k_internal_mdio_write(struct mii_bus *slave_bus, int phy, int regnum, u16 data)
+{
+ struct qca8k_priv *priv = slave_bus->priv;
+ struct mii_bus *bus = priv->bus;
+
+ return qca8k_mdio_write(bus, phy, regnum, data);
+}
+
+static int
+qca8k_internal_mdio_read(struct mii_bus *slave_bus, int phy, int regnum)
+{
+ struct qca8k_priv *priv = slave_bus->priv;
+ struct mii_bus *bus = priv->bus;
+
+ return qca8k_mdio_read(bus, phy, regnum);
+}
+
+static int
+qca8k_phy_write(struct dsa_switch *ds, int port, int regnum, u16 data)
+{
+ struct qca8k_priv *priv = ds->priv;
+
+ /* Check if the legacy mapping should be used and the
+ * port is not correctly mapped to the right PHY in the
+ * devicetree
+ */
+ if (priv->legacy_phy_port_mapping)
+ port = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
+
+ return qca8k_mdio_write(priv->bus, port, regnum, data);
+}
+
+static int
+qca8k_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+ struct qca8k_priv *priv = ds->priv;
+ int ret;
+
+ /* Check if the legacy mapping should be used and the
+ * port is not correctly mapped to the right PHY in the
+ * devicetree
+ */
+ if (priv->legacy_phy_port_mapping)
+ port = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
+
+ ret = qca8k_mdio_read(priv->bus, port, regnum);
+
+ if (ret < 0)
+ return 0xffff;
+
+ return ret;
+}
+
+static int
+qca8k_mdio_register(struct qca8k_priv *priv, struct device_node *mdio)
+{
+ struct dsa_switch *ds = priv->ds;
+ struct mii_bus *bus;
+
+ bus = devm_mdiobus_alloc(ds->dev);
+
+ if (!bus)
+ return -ENOMEM;
+
+ bus->priv = (void *)priv;
+ bus->name = "qca8k slave mii";
+ bus->read = qca8k_internal_mdio_read;
+ bus->write = qca8k_internal_mdio_write;
+ snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d",
+ ds->index);
+
+ bus->parent = ds->dev;
+ bus->phy_mask = ~ds->phys_mii_mask;
+
+ ds->slave_mii_bus = bus;
+
+ return devm_of_mdiobus_register(priv->dev, bus, mdio);
+}
+
+static int
+qca8k_setup_mdio_bus(struct qca8k_priv *priv)
+{
+ u32 internal_mdio_mask = 0, external_mdio_mask = 0, reg;
+ struct device_node *ports, *port, *mdio;
+ phy_interface_t mode;
+ int err;
+
+ ports = of_get_child_by_name(priv->dev->of_node, "ports");
+ if (!ports)
+ ports = of_get_child_by_name(priv->dev->of_node, "ethernet-ports");
+
+ if (!ports)
+ return -EINVAL;
+
+ for_each_available_child_of_node(ports, port) {
+ err = of_property_read_u32(port, "reg", &reg);
+ if (err) {
+ of_node_put(port);
+ of_node_put(ports);
+ return err;
+ }
+
+ if (!dsa_is_user_port(priv->ds, reg))
+ continue;
+
+ of_get_phy_mode(port, &mode);
+
+ if (of_property_read_bool(port, "phy-handle") &&
+ mode != PHY_INTERFACE_MODE_INTERNAL)
+ external_mdio_mask |= BIT(reg);
+ else
+ internal_mdio_mask |= BIT(reg);
+ }
+
+ of_node_put(ports);
+ if (!external_mdio_mask && !internal_mdio_mask) {
+ dev_err(priv->dev, "no PHYs are defined.\n");
+ return -EINVAL;
+ }
+
+ /* The QCA8K_MDIO_MASTER_EN Bit, which grants access to PHYs through
+ * the MDIO_MASTER register also _disconnects_ the external MDC
+ * passthrough to the internal PHYs. It's not possible to use both
+ * configurations at the same time!
+ *
+ * Because this came up during the review process:
+ * If the external mdio-bus driver is capable magically disabling
+ * the QCA8K_MDIO_MASTER_EN and mutex/spin-locking out the qca8k's
+ * accessors for the time being, it would be possible to pull this
+ * off.
+ */
+ if (!!external_mdio_mask && !!internal_mdio_mask) {
+ dev_err(priv->dev, "either internal or external mdio bus configuration is supported.\n");
+ return -EINVAL;
+ }
+
+ if (external_mdio_mask) {
+ /* Make sure to disable the internal mdio bus in cases
+ * a dt-overlay and driver reload changed the configuration
+ */
+
+ return qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
+ QCA8K_MDIO_MASTER_EN);
+ }
+
+ /* Check if the devicetree declare the port:phy mapping */
+ mdio = of_get_child_by_name(priv->dev->of_node, "mdio");
+ if (of_device_is_available(mdio)) {
+ err = qca8k_mdio_register(priv, mdio);
+ if (err)
+ of_node_put(mdio);
+
+ return err;
+ }
+
+ /* If a mapping can't be found the legacy mapping is used,
+ * using the qca8k_port_to_phy function
+ */
+ priv->legacy_phy_port_mapping = true;
+ priv->ops.phy_read = qca8k_phy_read;
+ priv->ops.phy_write = qca8k_phy_write;
+
+ return 0;
+}
+
+static int
+qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv)
+{
+ u32 mask = 0;
+ int ret = 0;
+
+ /* SoC specific settings for ipq8064.
+ * If more device require this consider adding
+ * a dedicated binding.
+ */
+ if (of_machine_is_compatible("qcom,ipq8064"))
+ mask |= QCA8K_MAC_PWR_RGMII0_1_8V;
+
+ /* SoC specific settings for ipq8065 */
+ if (of_machine_is_compatible("qcom,ipq8065"))
+ mask |= QCA8K_MAC_PWR_RGMII1_1_8V;
+
+ if (mask) {
+ ret = qca8k_rmw(priv, QCA8K_REG_MAC_PWR_SEL,
+ QCA8K_MAC_PWR_RGMII0_1_8V |
+ QCA8K_MAC_PWR_RGMII1_1_8V,
+ mask);
+ }
+
+ return ret;
+}
+
+static int qca8k_find_cpu_port(struct dsa_switch *ds)
+{
+ struct qca8k_priv *priv = ds->priv;
+
+ /* Find the connected cpu port. Valid port are 0 or 6 */
+ if (dsa_is_cpu_port(ds, 0))
+ return 0;
+
+ dev_dbg(priv->dev, "port 0 is not the CPU port. Checking port 6");
+
+ if (dsa_is_cpu_port(ds, 6))
+ return 6;
+
+ return -EINVAL;
+}
+
+static int
+qca8k_setup_of_pws_reg(struct qca8k_priv *priv)
+{
+ struct device_node *node = priv->dev->of_node;
+ const struct qca8k_match_data *data;
+ u32 val = 0;
+ int ret;
+
+ /* QCA8327 require to set to the correct mode.
+ * His bigger brother QCA8328 have the 172 pin layout.
+ * Should be applied by default but we set this just to make sure.
+ */
+ if (priv->switch_id == QCA8K_ID_QCA8327) {
+ data = of_device_get_match_data(priv->dev);
+
+ /* Set the correct package of 148 pin for QCA8327 */
+ if (data->reduced_package)
+ val |= QCA8327_PWS_PACKAGE148_EN;
+
+ ret = qca8k_rmw(priv, QCA8K_REG_PWS, QCA8327_PWS_PACKAGE148_EN,
+ val);
+ if (ret)
+ return ret;
+ }
+
+ if (of_property_read_bool(node, "qca,ignore-power-on-sel"))
+ val |= QCA8K_PWS_POWER_ON_SEL;
+
+ if (of_property_read_bool(node, "qca,led-open-drain")) {
+ if (!(val & QCA8K_PWS_POWER_ON_SEL)) {
+ dev_err(priv->dev, "qca,led-open-drain require qca,ignore-power-on-sel to be set.");
+ return -EINVAL;
+ }
+
+ val |= QCA8K_PWS_LED_OPEN_EN_CSR;
+ }
+
+ return qca8k_rmw(priv, QCA8K_REG_PWS,
+ QCA8K_PWS_LED_OPEN_EN_CSR | QCA8K_PWS_POWER_ON_SEL,
+ val);
+}
+
+static int
+qca8k_parse_port_config(struct qca8k_priv *priv)
+{
+ int port, cpu_port_index = -1, ret;
+ struct device_node *port_dn;
+ phy_interface_t mode;
+ struct dsa_port *dp;
+ u32 delay;
+
+ /* We have 2 CPU port. Check them */
+ for (port = 0; port < QCA8K_NUM_PORTS && cpu_port_index < QCA8K_NUM_CPU_PORTS; port++) {
+ /* Skip every other port */
+ if (port != 0 && port != 6)
+ continue;
+
+ dp = dsa_to_port(priv->ds, port);
+ port_dn = dp->dn;
+ cpu_port_index++;
+
+ if (!of_device_is_available(port_dn))
+ continue;
+
+ ret = of_get_phy_mode(port_dn, &mode);
+ if (ret)
+ continue;
+
+ switch (mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_SGMII:
+ delay = 0;
+
+ if (!of_property_read_u32(port_dn, "tx-internal-delay-ps", &delay))
+ /* Switch regs accept value in ns, convert ps to ns */
+ delay = delay / 1000;
+ else if (mode == PHY_INTERFACE_MODE_RGMII_ID ||
+ mode == PHY_INTERFACE_MODE_RGMII_TXID)
+ delay = 1;
+
+ if (delay > QCA8K_MAX_DELAY) {
+ dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value");
+ delay = 3;
+ }
+
+ priv->ports_config.rgmii_tx_delay[cpu_port_index] = delay;
+
+ delay = 0;
+
+ if (!of_property_read_u32(port_dn, "rx-internal-delay-ps", &delay))
+ /* Switch regs accept value in ns, convert ps to ns */
+ delay = delay / 1000;
+ else if (mode == PHY_INTERFACE_MODE_RGMII_ID ||
+ mode == PHY_INTERFACE_MODE_RGMII_RXID)
+ delay = 2;
+
+ if (delay > QCA8K_MAX_DELAY) {
+ dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value");
+ delay = 3;
+ }
+
+ priv->ports_config.rgmii_rx_delay[cpu_port_index] = delay;
+
+ /* Skip sgmii parsing for rgmii* mode */
+ if (mode == PHY_INTERFACE_MODE_RGMII ||
+ mode == PHY_INTERFACE_MODE_RGMII_ID ||
+ mode == PHY_INTERFACE_MODE_RGMII_TXID ||
+ mode == PHY_INTERFACE_MODE_RGMII_RXID)
+ break;
+
+ if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge"))
+ priv->ports_config.sgmii_tx_clk_falling_edge = true;
+
+ if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge"))
+ priv->ports_config.sgmii_rx_clk_falling_edge = true;
+
+ if (of_property_read_bool(port_dn, "qca,sgmii-enable-pll")) {
+ priv->ports_config.sgmii_enable_pll = true;
+
+ if (priv->switch_id == QCA8K_ID_QCA8327) {
+ dev_err(priv->dev, "SGMII PLL should NOT be enabled for qca8327. Aborting enabling");
+ priv->ports_config.sgmii_enable_pll = false;
+ }
+
+ if (priv->switch_revision < 2)
+ dev_warn(priv->dev, "SGMII PLL should NOT be enabled for qca8337 with revision 2 or more.");
+ }
+
+ break;
+ default:
+ continue;
+ }
+ }
+
+ return 0;
+}
+
+static int
+qca8k_setup(struct dsa_switch *ds)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ int cpu_port, ret, i;
+ u32 mask;
+
+ cpu_port = qca8k_find_cpu_port(ds);
+ if (cpu_port < 0) {
+ dev_err(priv->dev, "No cpu port configured in both cpu port0 and port6");
+ return cpu_port;
+ }
+
+ /* Parse CPU port config to be later used in phy_link mac_config */
+ ret = qca8k_parse_port_config(priv);
+ if (ret)
+ return ret;
+
+ mutex_init(&priv->reg_mutex);
+
+ /* Start by setting up the register mapping */
+ priv->regmap = devm_regmap_init(ds->dev, NULL, priv,
+ &qca8k_regmap_config);
+ if (IS_ERR(priv->regmap))
+ dev_warn(priv->dev, "regmap initialization failed");
+
+ ret = qca8k_setup_mdio_bus(priv);
+ if (ret)
+ return ret;
+
+ ret = qca8k_setup_of_pws_reg(priv);
+ if (ret)
+ return ret;
+
+ ret = qca8k_setup_mac_pwr_sel(priv);
+ if (ret)
+ return ret;
+
+ /* Enable CPU Port */
+ ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0,
+ QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
+ if (ret) {
+ dev_err(priv->dev, "failed enabling CPU port");
+ return ret;
+ }
+
+ /* Enable MIB counters */
+ ret = qca8k_mib_init(priv);
+ if (ret)
+ dev_warn(priv->dev, "mib init failed");
+
+ /* Initial setup of all ports */
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ /* Disable forwarding by default on all ports */
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+ QCA8K_PORT_LOOKUP_MEMBER, 0);
+ if (ret)
+ return ret;
+
+ /* Enable QCA header mode on all cpu ports */
+ if (dsa_is_cpu_port(ds, i)) {
+ ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i),
+ QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
+ QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
+ if (ret) {
+ dev_err(priv->dev, "failed enabling QCA header mode");
+ return ret;
+ }
+ }
+
+ /* Disable MAC by default on all user ports */
+ if (dsa_is_user_port(ds, i))
+ qca8k_port_set_status(priv, i, 0);
+ }
+
+ /* Forward all unknown frames to CPU port for Linux processing
+ * Notice that in multi-cpu config only one port should be set
+ * for igmp, unknown, multicast and broadcast packet
+ */
+ ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
+ BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S |
+ BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S |
+ BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S |
+ BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S);
+ if (ret)
+ return ret;
+
+ /* Setup connection between CPU port & user ports
+ * Configure specific switch configuration for ports
+ */
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ /* CPU port gets connected to all user ports of the switch */
+ if (dsa_is_cpu_port(ds, i)) {
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+ QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
+ if (ret)
+ return ret;
+ }
+
+ /* Individual user ports get connected to CPU port only */
+ if (dsa_is_user_port(ds, i)) {
+ int shift = 16 * (i % 2);
+
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+ QCA8K_PORT_LOOKUP_MEMBER,
+ BIT(cpu_port));
+ if (ret)
+ return ret;
+
+ /* Enable ARP Auto-learning by default */
+ ret = qca8k_reg_set(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+ QCA8K_PORT_LOOKUP_LEARN);
+ if (ret)
+ return ret;
+
+ /* For port based vlans to work we need to set the
+ * default egress vid
+ */
+ ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i),
+ 0xfff << shift,
+ QCA8K_PORT_VID_DEF << shift);
+ if (ret)
+ return ret;
+
+ ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i),
+ QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) |
+ QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF));
+ if (ret)
+ return ret;
+ }
+
+ /* The port 5 of the qca8337 have some problem in flood condition. The
+ * original legacy driver had some specific buffer and priority settings
+ * for the different port suggested by the QCA switch team. Add this
+ * missing settings to improve switch stability under load condition.
+ * This problem is limited to qca8337 and other qca8k switch are not affected.
+ */
+ if (priv->switch_id == QCA8K_ID_QCA8337) {
+ switch (i) {
+ /* The 2 CPU port and port 5 requires some different
+ * priority than any other ports.
+ */
+ case 0:
+ case 5:
+ case 6:
+ mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x4) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x4) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI4(0x6) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI5(0x8) |
+ QCA8K_PORT_HOL_CTRL0_EG_PORT(0x1e);
+ break;
+ default:
+ mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x6) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x8) |
+ QCA8K_PORT_HOL_CTRL0_EG_PORT(0x19);
+ }
+ qca8k_write(priv, QCA8K_REG_PORT_HOL_CTRL0(i), mask);
+
+ mask = QCA8K_PORT_HOL_CTRL1_ING(0x6) |
+ QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
+ QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
+ QCA8K_PORT_HOL_CTRL1_WRED_EN;
+ qca8k_rmw(priv, QCA8K_REG_PORT_HOL_CTRL1(i),
+ QCA8K_PORT_HOL_CTRL1_ING_BUF |
+ QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
+ QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
+ QCA8K_PORT_HOL_CTRL1_WRED_EN,
+ mask);
+ }
+
+ /* Set initial MTU for every port.
+ * We have only have a general MTU setting. So track
+ * every port and set the max across all port.
+ */
+ priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN;
+ }
+
+ /* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */
+ if (priv->switch_id == QCA8K_ID_QCA8327) {
+ mask = QCA8K_GLOBAL_FC_GOL_XON_THRES(288) |
+ QCA8K_GLOBAL_FC_GOL_XOFF_THRES(496);
+ qca8k_rmw(priv, QCA8K_REG_GLOBAL_FC_THRESH,
+ QCA8K_GLOBAL_FC_GOL_XON_THRES_S |
+ QCA8K_GLOBAL_FC_GOL_XOFF_THRES_S,
+ mask);
+ }
+
+ /* Setup our port MTUs to match power on defaults */
+ ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN);
+ if (ret)
+ dev_warn(priv->dev, "failed setting MTU settings");
+
+ /* Flush the FDB table */
+ qca8k_fdb_flush(priv);
+
+ /* We don't have interrupts for link changes, so we need to poll */
+ ds->pcs_poll = true;
+
+ return 0;
+}
+
+static void
+qca8k_mac_config_setup_internal_delay(struct qca8k_priv *priv, int cpu_port_index,
+ u32 reg)
+{
+ u32 delay, val = 0;
+ int ret;
+
+ /* Delay can be declared in 3 different way.
+ * Mode to rgmii and internal-delay standard binding defined
+ * rgmii-id or rgmii-tx/rx phy mode set.
+ * The parse logic set a delay different than 0 only when one
+ * of the 3 different way is used. In all other case delay is
+ * not enabled. With ID or TX/RXID delay is enabled and set
+ * to the default and recommended value.
+ */
+ if (priv->ports_config.rgmii_tx_delay[cpu_port_index]) {
+ delay = priv->ports_config.rgmii_tx_delay[cpu_port_index];
+
+ val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) |
+ QCA8K_PORT_PAD_RGMII_TX_DELAY_EN;
+ }
+
+ if (priv->ports_config.rgmii_rx_delay[cpu_port_index]) {
+ delay = priv->ports_config.rgmii_rx_delay[cpu_port_index];
+
+ val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) |
+ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN;
+ }
+
+ /* Set RGMII delay based on the selected values */
+ ret = qca8k_rmw(priv, reg,
+ QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK |
+ QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK |
+ QCA8K_PORT_PAD_RGMII_TX_DELAY_EN |
+ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN,
+ val);
+ if (ret)
+ dev_err(priv->dev, "Failed to set internal delay for CPU port%d",
+ cpu_port_index == QCA8K_CPU_PORT0 ? 0 : 6);
+}
+
+static void
+qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
+ const struct phylink_link_state *state)
+{
+ struct qca8k_priv *priv = ds->priv;
+ int cpu_port_index, ret;
+ u32 reg, val;
+
+ switch (port) {
+ case 0: /* 1st CPU port */
+ if (state->interface != PHY_INTERFACE_MODE_RGMII &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
+ state->interface != PHY_INTERFACE_MODE_SGMII)
+ return;
+
+ reg = QCA8K_REG_PORT0_PAD_CTRL;
+ cpu_port_index = QCA8K_CPU_PORT0;
+ break;
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ /* Internal PHY, nothing to do */
+ return;
+ case 6: /* 2nd CPU port / external PHY */
+ if (state->interface != PHY_INTERFACE_MODE_RGMII &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
+ state->interface != PHY_INTERFACE_MODE_SGMII &&
+ state->interface != PHY_INTERFACE_MODE_1000BASEX)
+ return;
+
+ reg = QCA8K_REG_PORT6_PAD_CTRL;
+ cpu_port_index = QCA8K_CPU_PORT6;
+ break;
+ default:
+ dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port);
+ return;
+ }
+
+ if (port != 6 && phylink_autoneg_inband(mode)) {
+ dev_err(ds->dev, "%s: in-band negotiation unsupported\n",
+ __func__);
+ return;
+ }
+
+ switch (state->interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ qca8k_write(priv, reg, QCA8K_PORT_PAD_RGMII_EN);
+
+ /* Configure rgmii delay */
+ qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
+
+ /* QCA8337 requires to set rgmii rx delay for all ports.
+ * This is enabled through PORT5_PAD_CTRL for all ports,
+ * rather than individual port registers.
+ */
+ if (priv->switch_id == QCA8K_ID_QCA8337)
+ qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
+ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_1000BASEX:
+ /* Enable SGMII on the port */
+ qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
+
+ /* Enable/disable SerDes auto-negotiation as necessary */
+ ret = qca8k_read(priv, QCA8K_REG_PWS, &val);
+ if (ret)
+ return;
+ if (phylink_autoneg_inband(mode))
+ val &= ~QCA8K_PWS_SERDES_AEN_DIS;
+ else
+ val |= QCA8K_PWS_SERDES_AEN_DIS;
+ qca8k_write(priv, QCA8K_REG_PWS, val);
+
+ /* Configure the SGMII parameters */
+ ret = qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val);
+ if (ret)
+ return;
+
+ val |= QCA8K_SGMII_EN_SD;
+
+ if (priv->ports_config.sgmii_enable_pll)
+ val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
+ QCA8K_SGMII_EN_TX;
+
+ if (dsa_is_cpu_port(ds, port)) {
+ /* CPU port, we're talking to the CPU MAC, be a PHY */
+ val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
+ val |= QCA8K_SGMII_MODE_CTRL_PHY;
+ } else if (state->interface == PHY_INTERFACE_MODE_SGMII) {
+ val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
+ val |= QCA8K_SGMII_MODE_CTRL_MAC;
+ } else if (state->interface == PHY_INTERFACE_MODE_1000BASEX) {
+ val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
+ val |= QCA8K_SGMII_MODE_CTRL_BASEX;
+ }
+
+ qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val);
+
+ /* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and
+ * falling edge is set writing in the PORT0 PAD reg
+ */
+ if (priv->switch_id == QCA8K_ID_QCA8327 ||
+ priv->switch_id == QCA8K_ID_QCA8337)
+ reg = QCA8K_REG_PORT0_PAD_CTRL;
+
+ val = 0;
+
+ /* SGMII Clock phase configuration */
+ if (priv->ports_config.sgmii_rx_clk_falling_edge)
+ val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE;
+
+ if (priv->ports_config.sgmii_tx_clk_falling_edge)
+ val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE;
+
+ if (val)
+ ret = qca8k_rmw(priv, reg,
+ QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE |
+ QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE,
+ val);
+
+ /* From original code is reported port instability as SGMII also
+ * require delay set. Apply advised values here or take them from DT.
+ */
+ if (state->interface == PHY_INTERFACE_MODE_SGMII)
+ qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
+
+ break;
+ default:
+ dev_err(ds->dev, "xMII mode %s not supported for port %d\n",
+ phy_modes(state->interface), port);
+ return;
+ }
+}
+
+static void
+qca8k_phylink_validate(struct dsa_switch *ds, int port,
+ unsigned long *supported,
+ struct phylink_link_state *state)
+{
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+
+ switch (port) {
+ case 0: /* 1st CPU port */
+ if (state->interface != PHY_INTERFACE_MODE_NA &&
+ state->interface != PHY_INTERFACE_MODE_RGMII &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
+ state->interface != PHY_INTERFACE_MODE_SGMII)
+ goto unsupported;
+ break;
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ /* Internal PHY */
+ if (state->interface != PHY_INTERFACE_MODE_NA &&
+ state->interface != PHY_INTERFACE_MODE_GMII &&
+ state->interface != PHY_INTERFACE_MODE_INTERNAL)
+ goto unsupported;
+ break;
+ case 6: /* 2nd CPU port / external PHY */
+ if (state->interface != PHY_INTERFACE_MODE_NA &&
+ state->interface != PHY_INTERFACE_MODE_RGMII &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
+ state->interface != PHY_INTERFACE_MODE_SGMII &&
+ state->interface != PHY_INTERFACE_MODE_1000BASEX)
+ goto unsupported;
+ break;
+ default:
+unsupported:
+ linkmode_zero(supported);
+ return;
+ }
+
+ phylink_set_port_modes(mask);
+ phylink_set(mask, Autoneg);
+
+ phylink_set(mask, 1000baseT_Full);
+ phylink_set(mask, 10baseT_Half);
+ phylink_set(mask, 10baseT_Full);
+ phylink_set(mask, 100baseT_Half);
+ phylink_set(mask, 100baseT_Full);
+
+ if (state->interface == PHY_INTERFACE_MODE_1000BASEX)
+ phylink_set(mask, 1000baseX_Full);
+
+ phylink_set(mask, Pause);
+ phylink_set(mask, Asym_Pause);
+
+ linkmode_and(supported, supported, mask);
+ linkmode_and(state->advertising, state->advertising, mask);
+}
+
+static int
+qca8k_phylink_mac_link_state(struct dsa_switch *ds, int port,
+ struct phylink_link_state *state)
+{
+ struct qca8k_priv *priv = ds->priv;
+ u32 reg;
+ int ret;
+
+ ret = qca8k_read(priv, QCA8K_REG_PORT_STATUS(port), &reg);
+ if (ret < 0)
+ return ret;
+
+ state->link = !!(reg & QCA8K_PORT_STATUS_LINK_UP);
+ state->an_complete = state->link;
+ state->an_enabled = !!(reg & QCA8K_PORT_STATUS_LINK_AUTO);
+ state->duplex = (reg & QCA8K_PORT_STATUS_DUPLEX) ? DUPLEX_FULL :
+ DUPLEX_HALF;
+
+ switch (reg & QCA8K_PORT_STATUS_SPEED) {
+ case QCA8K_PORT_STATUS_SPEED_10:
+ state->speed = SPEED_10;
+ break;
+ case QCA8K_PORT_STATUS_SPEED_100:
+ state->speed = SPEED_100;
+ break;
+ case QCA8K_PORT_STATUS_SPEED_1000:
+ state->speed = SPEED_1000;
+ break;
+ default:
+ state->speed = SPEED_UNKNOWN;
+ break;
+ }
+
+ state->pause = MLO_PAUSE_NONE;
+ if (reg & QCA8K_PORT_STATUS_RXFLOW)
+ state->pause |= MLO_PAUSE_RX;
+ if (reg & QCA8K_PORT_STATUS_TXFLOW)
+ state->pause |= MLO_PAUSE_TX;
+
+ return 1;
+}
+
+static void
+qca8k_phylink_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
+ phy_interface_t interface)
+{
+ struct qca8k_priv *priv = ds->priv;
+
+ qca8k_port_set_status(priv, port, 0);
+}
+
+static void
+qca8k_phylink_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode,
+ phy_interface_t interface, struct phy_device *phydev,
+ int speed, int duplex, bool tx_pause, bool rx_pause)
+{
+ struct qca8k_priv *priv = ds->priv;
+ u32 reg;
+
+ if (phylink_autoneg_inband(mode)) {
+ reg = QCA8K_PORT_STATUS_LINK_AUTO;
+ } else {
+ switch (speed) {
+ case SPEED_10:
+ reg = QCA8K_PORT_STATUS_SPEED_10;
+ break;
+ case SPEED_100:
+ reg = QCA8K_PORT_STATUS_SPEED_100;
+ break;
+ case SPEED_1000:
+ reg = QCA8K_PORT_STATUS_SPEED_1000;
+ break;
+ default:
+ reg = QCA8K_PORT_STATUS_LINK_AUTO;
+ break;
+ }
+
+ if (duplex == DUPLEX_FULL)
+ reg |= QCA8K_PORT_STATUS_DUPLEX;
+
+ if (rx_pause || dsa_is_cpu_port(ds, port))
+ reg |= QCA8K_PORT_STATUS_RXFLOW;
+
+ if (tx_pause || dsa_is_cpu_port(ds, port))
+ reg |= QCA8K_PORT_STATUS_TXFLOW;
+ }
+
+ reg |= QCA8K_PORT_STATUS_TXMAC | QCA8K_PORT_STATUS_RXMAC;
+
+ qca8k_write(priv, QCA8K_REG_PORT_STATUS(port), reg);
+}
+
+static void
+qca8k_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data)
+{
+ int i;
+
+ if (stringset != ETH_SS_STATS)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++)
+ strncpy(data + i * ETH_GSTRING_LEN, ar8327_mib[i].name,
+ ETH_GSTRING_LEN);
+}
+
+static void
+qca8k_get_ethtool_stats(struct dsa_switch *ds, int port,
+ uint64_t *data)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ const struct qca8k_mib_desc *mib;
+ u32 reg, i, val;
+ u32 hi = 0;
+ int ret;
+
+ for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) {
+ mib = &ar8327_mib[i];
+ reg = QCA8K_PORT_MIB_COUNTER(port) + mib->offset;
+
+ ret = qca8k_read(priv, reg, &val);
+ if (ret < 0)
+ continue;
+
+ if (mib->size == 2) {
+ ret = qca8k_read(priv, reg + 4, &hi);
+ if (ret < 0)
+ continue;
+ }
+
+ data[i] = val;
+ if (mib->size == 2)
+ data[i] |= (u64)hi << 32;
+ }
+}
+
+static int
+qca8k_get_sset_count(struct dsa_switch *ds, int port, int sset)
+{
+ if (sset != ETH_SS_STATS)
+ return 0;
+
+ return ARRAY_SIZE(ar8327_mib);
+}
+
+static int
+qca8k_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *eee)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ u32 lpi_en = QCA8K_REG_EEE_CTRL_LPI_EN(port);
+ u32 reg;
+ int ret;
+
+ mutex_lock(&priv->reg_mutex);
+ ret = qca8k_read(priv, QCA8K_REG_EEE_CTRL, &reg);
+ if (ret < 0)
+ goto exit;
+
+ if (eee->eee_enabled)
+ reg |= lpi_en;
+ else
+ reg &= ~lpi_en;
+ ret = qca8k_write(priv, QCA8K_REG_EEE_CTRL, reg);
+
+exit:
+ mutex_unlock(&priv->reg_mutex);
+ return ret;
+}
+
+static int
+qca8k_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
+{
+ /* Nothing to do on the port's MAC */
+ return 0;
+}
+
+static void
+qca8k_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ u32 stp_state;
+
+ switch (state) {
+ case BR_STATE_DISABLED:
+ stp_state = QCA8K_PORT_LOOKUP_STATE_DISABLED;
+ break;
+ case BR_STATE_BLOCKING:
+ stp_state = QCA8K_PORT_LOOKUP_STATE_BLOCKING;
+ break;
+ case BR_STATE_LISTENING:
+ stp_state = QCA8K_PORT_LOOKUP_STATE_LISTENING;
+ break;
+ case BR_STATE_LEARNING:
+ stp_state = QCA8K_PORT_LOOKUP_STATE_LEARNING;
+ break;
+ case BR_STATE_FORWARDING:
+ default:
+ stp_state = QCA8K_PORT_LOOKUP_STATE_FORWARD;
+ break;
+ }
+
+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_STATE_MASK, stp_state);
+}
+
+static int
+qca8k_port_bridge_join(struct dsa_switch *ds, int port, struct net_device *br)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ int port_mask, cpu_port;
+ int i, ret;
+
+ cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
+ port_mask = BIT(cpu_port);
+
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ if (dsa_is_cpu_port(ds, i))
+ continue;
+ if (dsa_to_port(ds, i)->bridge_dev != br)
+ continue;
+ /* Add this port to the portvlan mask of the other ports
+ * in the bridge
+ */
+ ret = qca8k_reg_set(priv,
+ QCA8K_PORT_LOOKUP_CTRL(i),
+ BIT(port));
+ if (ret)
+ return ret;
+ if (i != port)
+ port_mask |= BIT(i);
+ }
+
+ /* Add all other ports to this ports portvlan mask */
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_MEMBER, port_mask);
+
+ return ret;
+}
+
+static void
+qca8k_port_bridge_leave(struct dsa_switch *ds, int port, struct net_device *br)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ int cpu_port, i;
+
+ cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
+
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ if (dsa_is_cpu_port(ds, i))
+ continue;
+ if (dsa_to_port(ds, i)->bridge_dev != br)
+ continue;
+ /* Remove this port to the portvlan mask of the other ports
+ * in the bridge
+ */
+ qca8k_reg_clear(priv,
+ QCA8K_PORT_LOOKUP_CTRL(i),
+ BIT(port));
+ }
+
+ /* Set the cpu port to be the only one in the portvlan mask of
+ * this port
+ */
+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_MEMBER, BIT(cpu_port));
+}
+
+static int
+qca8k_port_enable(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+
+ qca8k_port_set_status(priv, port, 1);
+ priv->port_sts[port].enabled = 1;
+
+ if (dsa_is_user_port(ds, port))
+ phy_support_asym_pause(phy);
+
+ return 0;
+}
+
+static void
+qca8k_port_disable(struct dsa_switch *ds, int port)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+
+ qca8k_port_set_status(priv, port, 0);
+ priv->port_sts[port].enabled = 0;
+}
+
+static int
+qca8k_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+{
+ struct qca8k_priv *priv = ds->priv;
+ int i, mtu = 0;
+
+ priv->port_mtu[port] = new_mtu;
+
+ for (i = 0; i < QCA8K_NUM_PORTS; i++)
+ if (priv->port_mtu[i] > mtu)
+ mtu = priv->port_mtu[i];
+
+ /* Include L2 header / FCS length */
+ return qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, mtu + ETH_HLEN + ETH_FCS_LEN);
+}
+
+static int
+qca8k_port_max_mtu(struct dsa_switch *ds, int port)
+{
+ return QCA8K_MAX_MTU;
+}
+
+static int
+qca8k_port_fdb_insert(struct qca8k_priv *priv, const u8 *addr,
+ u16 port_mask, u16 vid)
+{
+ /* Set the vid to the port vlan id if no vid is set */
+ if (!vid)
+ vid = QCA8K_PORT_VID_DEF;
+
+ return qca8k_fdb_add(priv, addr, port_mask, vid,
+ QCA8K_ATU_STATUS_STATIC);
+}
+
+static int
+qca8k_port_fdb_add(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ u16 port_mask = BIT(port);
+
+ return qca8k_port_fdb_insert(priv, addr, port_mask, vid);
+}
+
+static int
+qca8k_port_fdb_del(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ u16 port_mask = BIT(port);
+
+ if (!vid)
+ vid = QCA8K_PORT_VID_DEF;
+
+ return qca8k_fdb_del(priv, addr, port_mask, vid);
+}
+
+static int
+qca8k_port_fdb_dump(struct dsa_switch *ds, int port,
+ dsa_fdb_dump_cb_t *cb, void *data)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ struct qca8k_fdb _fdb = { 0 };
+ int cnt = QCA8K_NUM_FDB_RECORDS;
+ bool is_static;
+ int ret = 0;
+
+ mutex_lock(&priv->reg_mutex);
+ while (cnt-- && !qca8k_fdb_next(priv, &_fdb, port)) {
+ if (!_fdb.aging)
+ break;
+ is_static = (_fdb.aging == QCA8K_ATU_STATUS_STATIC);
+ ret = cb(_fdb.mac, _fdb.vid, is_static, data);
+ if (ret)
+ break;
+ }
+ mutex_unlock(&priv->reg_mutex);
+
+ return 0;
+}
+
+static int
+qca8k_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
+ struct switchdev_trans *trans)
+{
+ struct qca8k_priv *priv = ds->priv;
+
+ if (switchdev_trans_ph_prepare(trans))
+ return 0;
+
+ if (vlan_filtering) {
+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_VLAN_MODE,
+ QCA8K_PORT_LOOKUP_VLAN_MODE_SECURE);
+ } else {
+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_VLAN_MODE,
+ QCA8K_PORT_LOOKUP_VLAN_MODE_NONE);
+ }
+
+ return 0;
+}
+
+static int
+qca8k_port_vlan_prepare(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ return 0;
+}
+
+static void
+qca8k_port_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+ bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
+ struct qca8k_priv *priv = ds->priv;
+ int ret = 0;
+ u16 vid;
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end && !ret; ++vid)
+ ret = qca8k_vlan_add(priv, port, vid, untagged);
+
+ if (ret)
+ dev_err(priv->dev, "Failed to add VLAN to port %d (%d)", port, ret);
+
+ if (pvid) {
+ int shift = 16 * (port % 2);
+
+ qca8k_rmw(priv, QCA8K_EGRESS_VLAN(port),
+ 0xfff << shift,
+ vlan->vid_end << shift);
+ qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(port),
+ QCA8K_PORT_VLAN_CVID(vlan->vid_end) |
+ QCA8K_PORT_VLAN_SVID(vlan->vid_end));
+ }
+}
+
+static int
+qca8k_port_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ struct qca8k_priv *priv = ds->priv;
+ int ret = 0;
+ u16 vid;
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end && !ret; ++vid)
+ ret = qca8k_vlan_del(priv, port, vid);
+
+ if (ret)
+ dev_err(priv->dev, "Failed to delete VLAN from port %d (%d)", port, ret);
+
+ return ret;
+}
+
+static u32 qca8k_get_phy_flags(struct dsa_switch *ds, int port)
+{
+ struct qca8k_priv *priv = ds->priv;
+
+ /* Communicate to the phy internal driver the switch revision.
+ * Based on the switch revision different values needs to be
+ * set to the dbg and mmd reg on the phy.
+ * The first 2 bit are used to communicate the switch revision
+ * to the phy driver.
+ */
+ if (port > 0 && port < 6)
+ return priv->switch_revision;
+
+ return 0;
+}
+
+static enum dsa_tag_protocol
+qca8k_get_tag_protocol(struct dsa_switch *ds, int port,
+ enum dsa_tag_protocol mp)
+{
+ return DSA_TAG_PROTO_QCA;
+}
+
+static const struct dsa_switch_ops qca8k_switch_ops = {
+ .get_tag_protocol = qca8k_get_tag_protocol,
+ .setup = qca8k_setup,
+ .get_strings = qca8k_get_strings,
+ .get_ethtool_stats = qca8k_get_ethtool_stats,
+ .get_sset_count = qca8k_get_sset_count,
+ .get_mac_eee = qca8k_get_mac_eee,
+ .set_mac_eee = qca8k_set_mac_eee,
+ .port_enable = qca8k_port_enable,
+ .port_disable = qca8k_port_disable,
+ .port_change_mtu = qca8k_port_change_mtu,
+ .port_max_mtu = qca8k_port_max_mtu,
+ .port_stp_state_set = qca8k_port_stp_state_set,
+ .port_bridge_join = qca8k_port_bridge_join,
+ .port_bridge_leave = qca8k_port_bridge_leave,
+ .port_fdb_add = qca8k_port_fdb_add,
+ .port_fdb_del = qca8k_port_fdb_del,
+ .port_fdb_dump = qca8k_port_fdb_dump,
+ .port_vlan_filtering = qca8k_port_vlan_filtering,
+ .port_vlan_prepare = qca8k_port_vlan_prepare,
+ .port_vlan_add = qca8k_port_vlan_add,
+ .port_vlan_del = qca8k_port_vlan_del,
+ .phylink_validate = qca8k_phylink_validate,
+ .phylink_mac_link_state = qca8k_phylink_mac_link_state,
+ .phylink_mac_config = qca8k_phylink_mac_config,
+ .phylink_mac_link_down = qca8k_phylink_mac_link_down,
+ .phylink_mac_link_up = qca8k_phylink_mac_link_up,
+ .get_phy_flags = qca8k_get_phy_flags,
+};
+
+static int qca8k_read_switch_id(struct qca8k_priv *priv)
+{
+ const struct qca8k_match_data *data;
+ u32 val;
+ u8 id;
+ int ret;
+
+ /* get the switches ID from the compatible */
+ data = of_device_get_match_data(priv->dev);
+ if (!data)
+ return -ENODEV;
+
+ ret = qca8k_read(priv, QCA8K_REG_MASK_CTRL, &val);
+ if (ret < 0)
+ return -ENODEV;
+
+ id = QCA8K_MASK_CTRL_DEVICE_ID(val & QCA8K_MASK_CTRL_DEVICE_ID_MASK);
+ if (id != data->id) {
+ dev_err(priv->dev, "Switch id detected %x but expected %x", id, data->id);
+ return -ENODEV;
+ }
+
+ priv->switch_id = id;
+
+ /* Save revision to communicate to the internal PHY driver */
+ priv->switch_revision = (val & QCA8K_MASK_CTRL_REV_ID_MASK);
+
+ return 0;
+}
+
+static int
+qca8k_sw_probe(struct mdio_device *mdiodev)
+{
+ struct qca8k_priv *priv;
+ int ret;
+
+ /* allocate the private data struct so that we can probe the switches
+ * ID register
+ */
+ priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->bus = mdiodev->bus;
+ priv->dev = &mdiodev->dev;
+
+ priv->reset_gpio = devm_gpiod_get_optional(priv->dev, "reset",
+ GPIOD_ASIS);
+ if (IS_ERR(priv->reset_gpio))
+ return PTR_ERR(priv->reset_gpio);
+
+ if (priv->reset_gpio) {
+ gpiod_set_value_cansleep(priv->reset_gpio, 1);
+ /* The active low duration must be greater than 10 ms
+ * and checkpatch.pl wants 20 ms.
+ */
+ msleep(20);
+ gpiod_set_value_cansleep(priv->reset_gpio, 0);
+ }
+
+ /* Check the detected switch id */
+ ret = qca8k_read_switch_id(priv);
+ if (ret)
+ return ret;
+
+ priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
+ if (!priv->ds)
+ return -ENOMEM;
+
+ priv->ds->dev = &mdiodev->dev;
+ priv->ds->num_ports = QCA8K_NUM_PORTS;
+ priv->ds->configure_vlan_while_not_filtering = true;
+ priv->ds->priv = priv;
+ priv->ops = qca8k_switch_ops;
+ priv->ds->ops = &priv->ops;
+ mutex_init(&priv->reg_mutex);
+ dev_set_drvdata(&mdiodev->dev, priv);
+
+ return dsa_register_switch(priv->ds);
+}
+
+static void
+qca8k_sw_remove(struct mdio_device *mdiodev)
+{
+ struct qca8k_priv *priv = dev_get_drvdata(&mdiodev->dev);
+ int i;
+
+ for (i = 0; i < QCA8K_NUM_PORTS; i++)
+ qca8k_port_set_status(priv, i, 0);
+
+ dsa_unregister_switch(priv->ds);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void
+qca8k_set_pm(struct qca8k_priv *priv, int enable)
+{
+ int i;
+
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ if (!priv->port_sts[i].enabled)
+ continue;
+
+ qca8k_port_set_status(priv, i, enable);
+ }
+}
+
+static int qca8k_suspend(struct device *dev)
+{
+ struct qca8k_priv *priv = dev_get_drvdata(dev);
+
+ qca8k_set_pm(priv, 0);
+
+ return dsa_switch_suspend(priv->ds);
+}
+
+static int qca8k_resume(struct device *dev)
+{
+ struct qca8k_priv *priv = dev_get_drvdata(dev);
+
+ qca8k_set_pm(priv, 1);
+
+ return dsa_switch_resume(priv->ds);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(qca8k_pm_ops,
+ qca8k_suspend, qca8k_resume);
+
+static const struct qca8k_match_data qca8327 = {
+ .id = QCA8K_ID_QCA8327,
+ .reduced_package = true,
+};
+
+static const struct qca8k_match_data qca8328 = {
+ .id = QCA8K_ID_QCA8327,
+};
+
+static const struct qca8k_match_data qca833x = {
+ .id = QCA8K_ID_QCA8337,
+};
+
+static const struct of_device_id qca8k_of_match[] = {
+ { .compatible = "qca,qca8327", .data = &qca8327 },
+ { .compatible = "qca,qca8328", .data = &qca8328 },
+ { .compatible = "qca,qca8334", .data = &qca833x },
+ { .compatible = "qca,qca8337", .data = &qca833x },
+ { /* sentinel */ },
+};
+
+static struct mdio_driver qca8kmdio_driver = {
+ .probe = qca8k_sw_probe,
+ .remove = qca8k_sw_remove,
+ .mdiodrv.driver = {
+ .name = "qca8k",
+ .of_match_table = qca8k_of_match,
+ .pm = &qca8k_pm_ops,
+ },
+};
+
+mdio_module_driver(qca8kmdio_driver);
+
+MODULE_AUTHOR("Mathieu Olivari, John Crispin <john@phrozen.org>");
+MODULE_DESCRIPTION("Driver for QCA8K ethernet switch family");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qca8k");
--- /dev/null
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.h
@@ -0,0 +1,310 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __QCA8K_H
+#define __QCA8K_H
+
+#include <linux/delay.h>
+#include <linux/regmap.h>
+#include <linux/gpio.h>
+
+#define QCA8K_NUM_PORTS 7
+#define QCA8K_NUM_CPU_PORTS 2
+#define QCA8K_MAX_MTU 9000
+
+#define PHY_ID_QCA8327 0x004dd034
+#define QCA8K_ID_QCA8327 0x12
+#define PHY_ID_QCA8337 0x004dd036
+#define QCA8K_ID_QCA8337 0x13
+
+#define QCA8K_BUSY_WAIT_TIMEOUT 2000
+
+#define QCA8K_NUM_FDB_RECORDS 2048
+
+#define QCA8K_PORT_VID_DEF 1
+
+/* Global control registers */
+#define QCA8K_REG_MASK_CTRL 0x000
+#define QCA8K_MASK_CTRL_REV_ID_MASK GENMASK(7, 0)
+#define QCA8K_MASK_CTRL_REV_ID(x) ((x) >> 0)
+#define QCA8K_MASK_CTRL_DEVICE_ID_MASK GENMASK(15, 8)
+#define QCA8K_MASK_CTRL_DEVICE_ID(x) ((x) >> 8)
+#define QCA8K_REG_PORT0_PAD_CTRL 0x004
+#define QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE BIT(19)
+#define QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE BIT(18)
+#define QCA8K_REG_PORT5_PAD_CTRL 0x008
+#define QCA8K_REG_PORT6_PAD_CTRL 0x00c
+#define QCA8K_PORT_PAD_RGMII_EN BIT(26)
+#define QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK GENMASK(23, 22)
+#define QCA8K_PORT_PAD_RGMII_TX_DELAY(x) ((x) << 22)
+#define QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK GENMASK(21, 20)
+#define QCA8K_PORT_PAD_RGMII_RX_DELAY(x) ((x) << 20)
+#define QCA8K_PORT_PAD_RGMII_TX_DELAY_EN BIT(25)
+#define QCA8K_PORT_PAD_RGMII_RX_DELAY_EN BIT(24)
+#define QCA8K_MAX_DELAY 3
+#define QCA8K_PORT_PAD_SGMII_EN BIT(7)
+#define QCA8K_REG_PWS 0x010
+#define QCA8K_PWS_POWER_ON_SEL BIT(31)
+/* This reg is only valid for QCA832x and toggle the package
+ * type from 176 pin (by default) to 148 pin used on QCA8327
+ */
+#define QCA8327_PWS_PACKAGE148_EN BIT(30)
+#define QCA8K_PWS_LED_OPEN_EN_CSR BIT(24)
+#define QCA8K_PWS_SERDES_AEN_DIS BIT(7)
+#define QCA8K_REG_MODULE_EN 0x030
+#define QCA8K_MODULE_EN_MIB BIT(0)
+#define QCA8K_REG_MIB 0x034
+#define QCA8K_MIB_FLUSH BIT(24)
+#define QCA8K_MIB_CPU_KEEP BIT(20)
+#define QCA8K_MIB_BUSY BIT(17)
+#define QCA8K_MDIO_MASTER_CTRL 0x3c
+#define QCA8K_MDIO_MASTER_BUSY BIT(31)
+#define QCA8K_MDIO_MASTER_EN BIT(30)
+#define QCA8K_MDIO_MASTER_READ BIT(27)
+#define QCA8K_MDIO_MASTER_WRITE 0
+#define QCA8K_MDIO_MASTER_SUP_PRE BIT(26)
+#define QCA8K_MDIO_MASTER_PHY_ADDR(x) ((x) << 21)
+#define QCA8K_MDIO_MASTER_REG_ADDR(x) ((x) << 16)
+#define QCA8K_MDIO_MASTER_DATA(x) (x)
+#define QCA8K_MDIO_MASTER_DATA_MASK GENMASK(15, 0)
+#define QCA8K_MDIO_MASTER_MAX_PORTS 5
+#define QCA8K_MDIO_MASTER_MAX_REG 32
+#define QCA8K_GOL_MAC_ADDR0 0x60
+#define QCA8K_GOL_MAC_ADDR1 0x64
+#define QCA8K_MAX_FRAME_SIZE 0x78
+#define QCA8K_REG_PORT_STATUS(_i) (0x07c + (_i) * 4)
+#define QCA8K_PORT_STATUS_SPEED GENMASK(1, 0)
+#define QCA8K_PORT_STATUS_SPEED_10 0
+#define QCA8K_PORT_STATUS_SPEED_100 0x1
+#define QCA8K_PORT_STATUS_SPEED_1000 0x2
+#define QCA8K_PORT_STATUS_TXMAC BIT(2)
+#define QCA8K_PORT_STATUS_RXMAC BIT(3)
+#define QCA8K_PORT_STATUS_TXFLOW BIT(4)
+#define QCA8K_PORT_STATUS_RXFLOW BIT(5)
+#define QCA8K_PORT_STATUS_DUPLEX BIT(6)
+#define QCA8K_PORT_STATUS_LINK_UP BIT(8)
+#define QCA8K_PORT_STATUS_LINK_AUTO BIT(9)
+#define QCA8K_PORT_STATUS_LINK_PAUSE BIT(10)
+#define QCA8K_PORT_STATUS_FLOW_AUTO BIT(12)
+#define QCA8K_REG_PORT_HDR_CTRL(_i) (0x9c + (_i * 4))
+#define QCA8K_PORT_HDR_CTRL_RX_MASK GENMASK(3, 2)
+#define QCA8K_PORT_HDR_CTRL_RX_S 2
+#define QCA8K_PORT_HDR_CTRL_TX_MASK GENMASK(1, 0)
+#define QCA8K_PORT_HDR_CTRL_TX_S 0
+#define QCA8K_PORT_HDR_CTRL_ALL 2
+#define QCA8K_PORT_HDR_CTRL_MGMT 1
+#define QCA8K_PORT_HDR_CTRL_NONE 0
+#define QCA8K_REG_SGMII_CTRL 0x0e0
+#define QCA8K_SGMII_EN_PLL BIT(1)
+#define QCA8K_SGMII_EN_RX BIT(2)
+#define QCA8K_SGMII_EN_TX BIT(3)
+#define QCA8K_SGMII_EN_SD BIT(4)
+#define QCA8K_SGMII_CLK125M_DELAY BIT(7)
+#define QCA8K_SGMII_MODE_CTRL_MASK (BIT(22) | BIT(23))
+#define QCA8K_SGMII_MODE_CTRL_BASEX (0 << 22)
+#define QCA8K_SGMII_MODE_CTRL_PHY (1 << 22)
+#define QCA8K_SGMII_MODE_CTRL_MAC (2 << 22)
+
+/* MAC_PWR_SEL registers */
+#define QCA8K_REG_MAC_PWR_SEL 0x0e4
+#define QCA8K_MAC_PWR_RGMII1_1_8V BIT(18)
+#define QCA8K_MAC_PWR_RGMII0_1_8V BIT(19)
+
+/* EEE control registers */
+#define QCA8K_REG_EEE_CTRL 0x100
+#define QCA8K_REG_EEE_CTRL_LPI_EN(_i) ((_i + 1) * 2)
+
+/* ACL registers */
+#define QCA8K_REG_PORT_VLAN_CTRL0(_i) (0x420 + (_i * 8))
+#define QCA8K_PORT_VLAN_CVID(x) (x << 16)
+#define QCA8K_PORT_VLAN_SVID(x) x
+#define QCA8K_REG_PORT_VLAN_CTRL1(_i) (0x424 + (_i * 8))
+#define QCA8K_REG_IPV4_PRI_BASE_ADDR 0x470
+#define QCA8K_REG_IPV4_PRI_ADDR_MASK 0x474
+
+/* Lookup registers */
+#define QCA8K_REG_ATU_DATA0 0x600
+#define QCA8K_ATU_ADDR2_S 24
+#define QCA8K_ATU_ADDR3_S 16
+#define QCA8K_ATU_ADDR4_S 8
+#define QCA8K_REG_ATU_DATA1 0x604
+#define QCA8K_ATU_PORT_M 0x7f
+#define QCA8K_ATU_PORT_S 16
+#define QCA8K_ATU_ADDR0_S 8
+#define QCA8K_REG_ATU_DATA2 0x608
+#define QCA8K_ATU_VID_M 0xfff
+#define QCA8K_ATU_VID_S 8
+#define QCA8K_ATU_STATUS_M 0xf
+#define QCA8K_ATU_STATUS_STATIC 0xf
+#define QCA8K_REG_ATU_FUNC 0x60c
+#define QCA8K_ATU_FUNC_BUSY BIT(31)
+#define QCA8K_ATU_FUNC_PORT_EN BIT(14)
+#define QCA8K_ATU_FUNC_MULTI_EN BIT(13)
+#define QCA8K_ATU_FUNC_FULL BIT(12)
+#define QCA8K_ATU_FUNC_PORT_M 0xf
+#define QCA8K_ATU_FUNC_PORT_S 8
+#define QCA8K_REG_VTU_FUNC0 0x610
+#define QCA8K_VTU_FUNC0_VALID BIT(20)
+#define QCA8K_VTU_FUNC0_IVL_EN BIT(19)
+#define QCA8K_VTU_FUNC0_EG_MODE_S(_i) (4 + (_i) * 2)
+#define QCA8K_VTU_FUNC0_EG_MODE_MASK 3
+#define QCA8K_VTU_FUNC0_EG_MODE_UNMOD 0
+#define QCA8K_VTU_FUNC0_EG_MODE_UNTAG 1
+#define QCA8K_VTU_FUNC0_EG_MODE_TAG 2
+#define QCA8K_VTU_FUNC0_EG_MODE_NOT 3
+#define QCA8K_REG_VTU_FUNC1 0x614
+#define QCA8K_VTU_FUNC1_BUSY BIT(31)
+#define QCA8K_VTU_FUNC1_VID_S 16
+#define QCA8K_VTU_FUNC1_FULL BIT(4)
+#define QCA8K_REG_GLOBAL_FW_CTRL0 0x620
+#define QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN BIT(10)
+#define QCA8K_REG_GLOBAL_FW_CTRL1 0x624
+#define QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S 24
+#define QCA8K_GLOBAL_FW_CTRL1_BC_DP_S 16
+#define QCA8K_GLOBAL_FW_CTRL1_MC_DP_S 8
+#define QCA8K_GLOBAL_FW_CTRL1_UC_DP_S 0
+#define QCA8K_PORT_LOOKUP_CTRL(_i) (0x660 + (_i) * 0xc)
+#define QCA8K_PORT_LOOKUP_MEMBER GENMASK(6, 0)
+#define QCA8K_PORT_LOOKUP_VLAN_MODE GENMASK(9, 8)
+#define QCA8K_PORT_LOOKUP_VLAN_MODE_NONE (0 << 8)
+#define QCA8K_PORT_LOOKUP_VLAN_MODE_FALLBACK (1 << 8)
+#define QCA8K_PORT_LOOKUP_VLAN_MODE_CHECK (2 << 8)
+#define QCA8K_PORT_LOOKUP_VLAN_MODE_SECURE (3 << 8)
+#define QCA8K_PORT_LOOKUP_STATE_MASK GENMASK(18, 16)
+#define QCA8K_PORT_LOOKUP_STATE_DISABLED (0 << 16)
+#define QCA8K_PORT_LOOKUP_STATE_BLOCKING (1 << 16)
+#define QCA8K_PORT_LOOKUP_STATE_LISTENING (2 << 16)
+#define QCA8K_PORT_LOOKUP_STATE_LEARNING (3 << 16)
+#define QCA8K_PORT_LOOKUP_STATE_FORWARD (4 << 16)
+#define QCA8K_PORT_LOOKUP_STATE GENMASK(18, 16)
+#define QCA8K_PORT_LOOKUP_LEARN BIT(20)
+
+#define QCA8K_REG_GLOBAL_FC_THRESH 0x800
+#define QCA8K_GLOBAL_FC_GOL_XON_THRES(x) ((x) << 16)
+#define QCA8K_GLOBAL_FC_GOL_XON_THRES_S GENMASK(24, 16)
+#define QCA8K_GLOBAL_FC_GOL_XOFF_THRES(x) ((x) << 0)
+#define QCA8K_GLOBAL_FC_GOL_XOFF_THRES_S GENMASK(8, 0)
+
+#define QCA8K_REG_PORT_HOL_CTRL0(_i) (0x970 + (_i) * 0x8)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI0_BUF GENMASK(3, 0)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI0(x) ((x) << 0)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI1_BUF GENMASK(7, 4)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI1(x) ((x) << 4)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI2_BUF GENMASK(11, 8)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI2(x) ((x) << 8)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI3_BUF GENMASK(15, 12)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI3(x) ((x) << 12)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI4_BUF GENMASK(19, 16)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI4(x) ((x) << 16)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI5_BUF GENMASK(23, 20)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI5(x) ((x) << 20)
+#define QCA8K_PORT_HOL_CTRL0_EG_PORT_BUF GENMASK(29, 24)
+#define QCA8K_PORT_HOL_CTRL0_EG_PORT(x) ((x) << 24)
+
+#define QCA8K_REG_PORT_HOL_CTRL1(_i) (0x974 + (_i) * 0x8)
+#define QCA8K_PORT_HOL_CTRL1_ING_BUF GENMASK(3, 0)
+#define QCA8K_PORT_HOL_CTRL1_ING(x) ((x) << 0)
+#define QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN BIT(6)
+#define QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN BIT(7)
+#define QCA8K_PORT_HOL_CTRL1_WRED_EN BIT(8)
+#define QCA8K_PORT_HOL_CTRL1_EG_MIRROR_EN BIT(16)
+
+/* Pkt edit registers */
+#define QCA8K_EGRESS_VLAN(x) (0x0c70 + (4 * (x / 2)))
+
+/* L3 registers */
+#define QCA8K_HROUTER_CONTROL 0xe00
+#define QCA8K_HROUTER_CONTROL_GLB_LOCKTIME_M GENMASK(17, 16)
+#define QCA8K_HROUTER_CONTROL_GLB_LOCKTIME_S 16
+#define QCA8K_HROUTER_CONTROL_ARP_AGE_MODE 1
+#define QCA8K_HROUTER_PBASED_CONTROL1 0xe08
+#define QCA8K_HROUTER_PBASED_CONTROL2 0xe0c
+#define QCA8K_HNAT_CONTROL 0xe38
+
+/* MIB registers */
+#define QCA8K_PORT_MIB_COUNTER(_i) (0x1000 + (_i) * 0x100)
+
+/* QCA specific MII registers */
+#define MII_ATH_MMD_ADDR 0x0d
+#define MII_ATH_MMD_DATA 0x0e
+
+enum {
+ QCA8K_PORT_SPEED_10M = 0,
+ QCA8K_PORT_SPEED_100M = 1,
+ QCA8K_PORT_SPEED_1000M = 2,
+ QCA8K_PORT_SPEED_ERR = 3,
+};
+
+enum qca8k_fdb_cmd {
+ QCA8K_FDB_FLUSH = 1,
+ QCA8K_FDB_LOAD = 2,
+ QCA8K_FDB_PURGE = 3,
+ QCA8K_FDB_NEXT = 6,
+ QCA8K_FDB_SEARCH = 7,
+};
+
+enum qca8k_vlan_cmd {
+ QCA8K_VLAN_FLUSH = 1,
+ QCA8K_VLAN_LOAD = 2,
+ QCA8K_VLAN_PURGE = 3,
+ QCA8K_VLAN_REMOVE_PORT = 4,
+ QCA8K_VLAN_NEXT = 5,
+ QCA8K_VLAN_READ = 6,
+};
+
+struct ar8xxx_port_status {
+ int enabled;
+};
+
+struct qca8k_match_data {
+ u8 id;
+ bool reduced_package;
+};
+
+enum {
+ QCA8K_CPU_PORT0,
+ QCA8K_CPU_PORT6,
+};
+
+struct qca8k_ports_config {
+ bool sgmii_rx_clk_falling_edge;
+ bool sgmii_tx_clk_falling_edge;
+ bool sgmii_enable_pll;
+ u8 rgmii_rx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
+ u8 rgmii_tx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
+};
+
+struct qca8k_priv {
+ u8 switch_id;
+ u8 switch_revision;
+ bool legacy_phy_port_mapping;
+ struct qca8k_ports_config ports_config;
+ struct regmap *regmap;
+ struct mii_bus *bus;
+ struct ar8xxx_port_status port_sts[QCA8K_NUM_PORTS];
+ struct dsa_switch *ds;
+ struct mutex reg_mutex;
+ struct device *dev;
+ struct dsa_switch_ops ops;
+ struct gpio_desc *reset_gpio;
+ unsigned int port_mtu[QCA8K_NUM_PORTS];
+};
+
+struct qca8k_mib_desc {
+ unsigned int size;
+ unsigned int offset;
+ const char *name;
+};
+
+struct qca8k_fdb {
+ u16 vid;
+ u8 port_mask;
+ u8 aging;
+ u8 mac[6];
+};
+
+#endif /* __QCA8K_H */
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
@@ -1,25 +1,28 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2011-2012, 2020-2021 Gabor Juhos <juhosg@openwrt.org>
* Copyright (c) 2015, 2019, The Linux Foundation. All rights reserved.
* Copyright (c) 2016 John Crispin <john@phrozen.org>
+ * Copyright (c) 2021 Robert Marko <robert.marko@sartura.hr>
*/
+#include <linux/version.h>
+#include <linux/etherdevice.h>
+#include <linux/if_bridge.h>
+#include <linux/mdio.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
-#include <linux/phy.h>
#include <linux/netdevice.h>
-#include <net/dsa.h>
-#include <linux/of_net.h>
#include <linux/of_mdio.h>
+#include <linux/of_net.h>
#include <linux/of_platform.h>
-#include <linux/if_bridge.h>
-#include <linux/mdio.h>
+#include <linux/phy.h>
#include <linux/phylink.h>
-#include <linux/gpio/consumer.h>
-#include <linux/etherdevice.h>
+#include <linux/reset.h>
+#include <net/dsa.h>
-#include "qca8k.h"
+#include "qca8k-ipq4019.h"
#define MIB_DESC(_s, _o, _n) \
{ \
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
@@ -68,186 +71,38 @@ static const struct qca8k_mib_desc ar8327_mib[] = {
MIB_DESC(1, 0x9c, "TxExcDefer"),
MIB_DESC(1, 0xa0, "TxDefer"),
MIB_DESC(1, 0xa4, "TxLateCol"),
+ MIB_DESC(1, 0xa8, "RXUnicast"),
+ MIB_DESC(1, 0xac, "TXunicast"),
};
-/* The 32bit switch registers are accessed indirectly. To achieve this we need
- * to set the page of the register. Track the last page that was set to reduce
- * mdio writes
- */
-static u16 qca8k_current_page = 0xffff;
-
-static void
-qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
-{
- regaddr >>= 1;
- *r1 = regaddr & 0x1e;
-
- regaddr >>= 5;
- *r2 = regaddr & 0x7;
-
- regaddr >>= 3;
- *page = regaddr & 0x3ff;
-}
-
-static int
-qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val)
-{
- int ret;
-
- ret = bus->read(bus, phy_id, regnum);
- if (ret >= 0) {
- *val = ret;
- ret = bus->read(bus, phy_id, regnum + 1);
- *val |= ret << 16;
- }
-
- if (ret < 0) {
- dev_err_ratelimited(&bus->dev,
- "failed to read qca8k 32bit register\n");
- *val = 0;
- return ret;
- }
-
- return 0;
-}
-
-static void
-qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val)
-{
- u16 lo, hi;
- int ret;
-
- lo = val & 0xffff;
- hi = (u16)(val >> 16);
-
- ret = bus->write(bus, phy_id, regnum, lo);
- if (ret >= 0)
- ret = bus->write(bus, phy_id, regnum + 1, hi);
- if (ret < 0)
- dev_err_ratelimited(&bus->dev,
- "failed to write qca8k 32bit register\n");
-}
-
-static int
-qca8k_set_page(struct mii_bus *bus, u16 page)
-{
- int ret;
-
- if (page == qca8k_current_page)
- return 0;
-
- ret = bus->write(bus, 0x18, 0, page);
- if (ret < 0) {
- dev_err_ratelimited(&bus->dev,
- "failed to set qca8k page\n");
- return ret;
- }
-
- qca8k_current_page = page;
- usleep_range(1000, 2000);
- return 0;
-}
-
static int
qca8k_read(struct qca8k_priv *priv, u32 reg, u32 *val)
{
- struct mii_bus *bus = priv->bus;
- u16 r1, r2, page;
- int ret;
-
- qca8k_split_addr(reg, &r1, &r2, &page);
-
- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-
- ret = qca8k_set_page(bus, page);
- if (ret < 0)
- goto exit;
-
- ret = qca8k_mii_read32(bus, 0x10 | r2, r1, val);
-
-exit:
- mutex_unlock(&bus->mdio_lock);
- return ret;
+ return regmap_read(priv->regmap, reg, val);
}
static int
qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val)
{
- struct mii_bus *bus = priv->bus;
- u16 r1, r2, page;
- int ret;
-
- qca8k_split_addr(reg, &r1, &r2, &page);
-
- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-
- ret = qca8k_set_page(bus, page);
- if (ret < 0)
- goto exit;
-
- qca8k_mii_write32(bus, 0x10 | r2, r1, val);
-
-exit:
- mutex_unlock(&bus->mdio_lock);
- return ret;
+ return regmap_write(priv->regmap, reg, val);
}
static int
qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val)
{
- struct mii_bus *bus = priv->bus;
- u16 r1, r2, page;
- u32 val;
- int ret;
-
- qca8k_split_addr(reg, &r1, &r2, &page);
-
- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-
- ret = qca8k_set_page(bus, page);
- if (ret < 0)
- goto exit;
-
- ret = qca8k_mii_read32(bus, 0x10 | r2, r1, &val);
- if (ret < 0)
- goto exit;
-
- val &= ~mask;
- val |= write_val;
- qca8k_mii_write32(bus, 0x10 | r2, r1, val);
-
-exit:
- mutex_unlock(&bus->mdio_lock);
-
- return ret;
+ return regmap_update_bits(priv->regmap, reg, mask, write_val);
}
static int
qca8k_reg_set(struct qca8k_priv *priv, u32 reg, u32 val)
{
- return qca8k_rmw(priv, reg, 0, val);
+ return regmap_set_bits(priv->regmap, reg, val);
}
static int
qca8k_reg_clear(struct qca8k_priv *priv, u32 reg, u32 val)
{
- return qca8k_rmw(priv, reg, val, 0);
-}
-
-static int
-qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
-{
- struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
-
- return qca8k_read(priv, reg, val);
-}
-
-static int
-qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val)
-{
- struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
-
- return qca8k_write(priv, reg, val);
+ return regmap_clear_bits(priv->regmap, reg, val);
}
static const struct regmap_range qca8k_readable_ranges[] = {
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
@@ -274,33 +129,31 @@ static const struct regmap_access_table qca8k_readable_table = {
.n_yes_ranges = ARRAY_SIZE(qca8k_readable_ranges),
};
-static struct regmap_config qca8k_regmap_config = {
- .reg_bits = 16,
+static struct regmap_config qca8k_ipq4019_regmap_config = {
+ .reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
.max_register = 0x16ac, /* end MIB - Port6 range */
- .reg_read = qca8k_regmap_read,
- .reg_write = qca8k_regmap_write,
.rd_table = &qca8k_readable_table,
};
+static struct regmap_config qca8k_ipq4019_psgmii_phy_regmap_config = {
+ .name = "psgmii-phy",
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = 0x7fc,
+};
+
static int
qca8k_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask)
{
- int ret, ret1;
u32 val;
- ret = read_poll_timeout(qca8k_read, ret1, !(val & mask),
- 0, QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false,
- priv, reg, &val);
-
- /* Check if qca8k_read has failed for a different reason
- * before returning -ETIMEDOUT
- */
- if (ret < 0 && ret1 < 0)
- return ret1;
-
- return ret;
+ return regmap_read_poll_timeout(priv->regmap, reg, val,
+ !(val & mask),
+ 0,
+ QCA8K_BUSY_WAIT_TIMEOUT);
}
static int
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
@@ -595,8 +448,11 @@ qca8k_port_set_status(struct qca8k_priv *priv, int port, int enable)
{
u32 mask = QCA8K_PORT_STATUS_TXMAC | QCA8K_PORT_STATUS_RXMAC;
- /* Port 0 and 6 have no internal PHY */
- if (port > 0 && port < 6)
+ /* Port 0 is internally connected to the CPU
+ * TODO: Probably check for RGMII as well if it doesnt work
+ * in RGMII mode.
+ */
+ if (port > QCA8K_CPU_PORT)
mask |= QCA8K_PORT_STATUS_LINK_AUTO;
if (enable)
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
@@ -605,467 +461,56 @@ qca8k_port_set_status(struct qca8k_priv *priv, int port, int enable)
qca8k_reg_clear(priv, QCA8K_REG_PORT_STATUS(port), mask);
}
-static u32
-qca8k_port_to_phy(int port)
-{
- /* From Andrew Lunn:
- * Port 0 has no internal phy.
- * Port 1 has an internal PHY at MDIO address 0.
- * Port 2 has an internal PHY at MDIO address 1.
- * ...
- * Port 5 has an internal PHY at MDIO address 4.
- * Port 6 has no internal PHY.
- */
-
- return port - 1;
-}
-
-static int
-qca8k_mdio_busy_wait(struct mii_bus *bus, u32 reg, u32 mask)
-{
- u16 r1, r2, page;
- u32 val;
- int ret, ret1;
-
- qca8k_split_addr(reg, &r1, &r2, &page);
-
- ret = read_poll_timeout(qca8k_mii_read32, ret1, !(val & mask), 0,
- QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false,
- bus, 0x10 | r2, r1, &val);
-
- /* Check if qca8k_read has failed for a different reason
- * before returnting -ETIMEDOUT
- */
- if (ret < 0 && ret1 < 0)
- return ret1;
-
- return ret;
-}
-
-static int
-qca8k_mdio_write(struct mii_bus *bus, int phy, int regnum, u16 data)
-{
- u16 r1, r2, page;
- u32 val;
- int ret;
-
- if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
- return -EINVAL;
-
- val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
- QCA8K_MDIO_MASTER_WRITE | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
- QCA8K_MDIO_MASTER_REG_ADDR(regnum) |
- QCA8K_MDIO_MASTER_DATA(data);
-
- qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page);
-
- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-
- ret = qca8k_set_page(bus, page);
- if (ret)
- goto exit;
-
- qca8k_mii_write32(bus, 0x10 | r2, r1, val);
-
- ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL,
- QCA8K_MDIO_MASTER_BUSY);
-
-exit:
- /* even if the busy_wait timeouts try to clear the MASTER_EN */
- qca8k_mii_write32(bus, 0x10 | r2, r1, 0);
-
- mutex_unlock(&bus->mdio_lock);
-
- return ret;
-}
-
-static int
-qca8k_mdio_read(struct mii_bus *bus, int phy, int regnum)
-{
- u16 r1, r2, page;
- u32 val;
- int ret;
-
- if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
- return -EINVAL;
-
- val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
- QCA8K_MDIO_MASTER_READ | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
- QCA8K_MDIO_MASTER_REG_ADDR(regnum);
-
- qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page);
-
- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-
- ret = qca8k_set_page(bus, page);
- if (ret)
- goto exit;
-
- qca8k_mii_write32(bus, 0x10 | r2, r1, val);
-
- ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL,
- QCA8K_MDIO_MASTER_BUSY);
- if (ret)
- goto exit;
-
- ret = qca8k_mii_read32(bus, 0x10 | r2, r1, &val);
-
-exit:
- /* even if the busy_wait timeouts try to clear the MASTER_EN */
- qca8k_mii_write32(bus, 0x10 | r2, r1, 0);
-
- mutex_unlock(&bus->mdio_lock);
-
- if (ret >= 0)
- ret = val & QCA8K_MDIO_MASTER_DATA_MASK;
-
- return ret;
-}
-
-static int
-qca8k_internal_mdio_write(struct mii_bus *slave_bus, int phy, int regnum, u16 data)
-{
- struct qca8k_priv *priv = slave_bus->priv;
- struct mii_bus *bus = priv->bus;
-
- return qca8k_mdio_write(bus, phy, regnum, data);
-}
-
-static int
-qca8k_internal_mdio_read(struct mii_bus *slave_bus, int phy, int regnum)
-{
- struct qca8k_priv *priv = slave_bus->priv;
- struct mii_bus *bus = priv->bus;
-
- return qca8k_mdio_read(bus, phy, regnum);
-}
-
-static int
-qca8k_phy_write(struct dsa_switch *ds, int port, int regnum, u16 data)
-{
- struct qca8k_priv *priv = ds->priv;
-
- /* Check if the legacy mapping should be used and the
- * port is not correctly mapped to the right PHY in the
- * devicetree
- */
- if (priv->legacy_phy_port_mapping)
- port = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
-
- return qca8k_mdio_write(priv->bus, port, regnum, data);
-}
-
static int
-qca8k_phy_read(struct dsa_switch *ds, int port, int regnum)
+qca8k_setup_port(struct dsa_switch *ds, int port)
{
- struct qca8k_priv *priv = ds->priv;
- int ret;
-
- /* Check if the legacy mapping should be used and the
- * port is not correctly mapped to the right PHY in the
- * devicetree
- */
- if (priv->legacy_phy_port_mapping)
- port = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
-
- ret = qca8k_mdio_read(priv->bus, port, regnum);
-
- if (ret < 0)
- return 0xffff;
-
- return ret;
-}
-
-static int
-qca8k_mdio_register(struct qca8k_priv *priv, struct device_node *mdio)
-{
- struct dsa_switch *ds = priv->ds;
- struct mii_bus *bus;
-
- bus = devm_mdiobus_alloc(ds->dev);
-
- if (!bus)
- return -ENOMEM;
-
- bus->priv = (void *)priv;
- bus->name = "qca8k slave mii";
- bus->read = qca8k_internal_mdio_read;
- bus->write = qca8k_internal_mdio_write;
- snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d",
- ds->index);
-
- bus->parent = ds->dev;
- bus->phy_mask = ~ds->phys_mii_mask;
-
- ds->slave_mii_bus = bus;
-
- return devm_of_mdiobus_register(priv->dev, bus, mdio);
-}
-
-static int
-qca8k_setup_mdio_bus(struct qca8k_priv *priv)
-{
- u32 internal_mdio_mask = 0, external_mdio_mask = 0, reg;
- struct device_node *ports, *port, *mdio;
- phy_interface_t mode;
- int err;
-
- ports = of_get_child_by_name(priv->dev->of_node, "ports");
- if (!ports)
- ports = of_get_child_by_name(priv->dev->of_node, "ethernet-ports");
-
- if (!ports)
- return -EINVAL;
-
- for_each_available_child_of_node(ports, port) {
- err = of_property_read_u32(port, "reg", &reg);
- if (err) {
- of_node_put(port);
- of_node_put(ports);
- return err;
- }
-
- if (!dsa_is_user_port(priv->ds, reg))
- continue;
-
- of_get_phy_mode(port, &mode);
-
- if (of_property_read_bool(port, "phy-handle") &&
- mode != PHY_INTERFACE_MODE_INTERNAL)
- external_mdio_mask |= BIT(reg);
- else
- internal_mdio_mask |= BIT(reg);
- }
-
- of_node_put(ports);
- if (!external_mdio_mask && !internal_mdio_mask) {
- dev_err(priv->dev, "no PHYs are defined.\n");
- return -EINVAL;
- }
-
- /* The QCA8K_MDIO_MASTER_EN Bit, which grants access to PHYs through
- * the MDIO_MASTER register also _disconnects_ the external MDC
- * passthrough to the internal PHYs. It's not possible to use both
- * configurations at the same time!
- *
- * Because this came up during the review process:
- * If the external mdio-bus driver is capable magically disabling
- * the QCA8K_MDIO_MASTER_EN and mutex/spin-locking out the qca8k's
- * accessors for the time being, it would be possible to pull this
- * off.
- */
- if (!!external_mdio_mask && !!internal_mdio_mask) {
- dev_err(priv->dev, "either internal or external mdio bus configuration is supported.\n");
- return -EINVAL;
- }
-
- if (external_mdio_mask) {
- /* Make sure to disable the internal mdio bus in cases
- * a dt-overlay and driver reload changed the configuration
- */
-
- return qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
- QCA8K_MDIO_MASTER_EN);
- }
-
- /* Check if the devicetree declare the port:phy mapping */
- mdio = of_get_child_by_name(priv->dev->of_node, "mdio");
- if (of_device_is_available(mdio)) {
- err = qca8k_mdio_register(priv, mdio);
- if (err)
- of_node_put(mdio);
-
- return err;
- }
-
- /* If a mapping can't be found the legacy mapping is used,
- * using the qca8k_port_to_phy function
- */
- priv->legacy_phy_port_mapping = true;
- priv->ops.phy_read = qca8k_phy_read;
- priv->ops.phy_write = qca8k_phy_write;
-
- return 0;
-}
-
-static int
-qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv)
-{
- u32 mask = 0;
- int ret = 0;
-
- /* SoC specific settings for ipq8064.
- * If more device require this consider adding
- * a dedicated binding.
- */
- if (of_machine_is_compatible("qcom,ipq8064"))
- mask |= QCA8K_MAC_PWR_RGMII0_1_8V;
-
- /* SoC specific settings for ipq8065 */
- if (of_machine_is_compatible("qcom,ipq8065"))
- mask |= QCA8K_MAC_PWR_RGMII1_1_8V;
-
- if (mask) {
- ret = qca8k_rmw(priv, QCA8K_REG_MAC_PWR_SEL,
- QCA8K_MAC_PWR_RGMII0_1_8V |
- QCA8K_MAC_PWR_RGMII1_1_8V,
- mask);
- }
-
- return ret;
-}
-
-static int qca8k_find_cpu_port(struct dsa_switch *ds)
-{
- struct qca8k_priv *priv = ds->priv;
-
- /* Find the connected cpu port. Valid port are 0 or 6 */
- if (dsa_is_cpu_port(ds, 0))
- return 0;
-
- dev_dbg(priv->dev, "port 0 is not the CPU port. Checking port 6");
-
- if (dsa_is_cpu_port(ds, 6))
- return 6;
-
- return -EINVAL;
-}
-
-static int
-qca8k_setup_of_pws_reg(struct qca8k_priv *priv)
-{
- struct device_node *node = priv->dev->of_node;
- const struct qca8k_match_data *data;
- u32 val = 0;
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
int ret;
- /* QCA8327 require to set to the correct mode.
- * His bigger brother QCA8328 have the 172 pin layout.
- * Should be applied by default but we set this just to make sure.
- */
- if (priv->switch_id == QCA8K_ID_QCA8327) {
- data = of_device_get_match_data(priv->dev);
-
- /* Set the correct package of 148 pin for QCA8327 */
- if (data->reduced_package)
- val |= QCA8327_PWS_PACKAGE148_EN;
-
- ret = qca8k_rmw(priv, QCA8K_REG_PWS, QCA8327_PWS_PACKAGE148_EN,
- val);
+ /* CPU port gets connected to all user ports of the switch */
+ if (dsa_is_cpu_port(ds, port)) {
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT),
+ QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
if (ret)
return ret;
- }
-
- if (of_property_read_bool(node, "qca,ignore-power-on-sel"))
- val |= QCA8K_PWS_POWER_ON_SEL;
-
- if (of_property_read_bool(node, "qca,led-open-drain")) {
- if (!(val & QCA8K_PWS_POWER_ON_SEL)) {
- dev_err(priv->dev, "qca,led-open-drain require qca,ignore-power-on-sel to be set.");
- return -EINVAL;
- }
- val |= QCA8K_PWS_LED_OPEN_EN_CSR;
+ /* Disable CPU ARP Auto-learning by default */
+ ret = qca8k_reg_clear(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT),
+ QCA8K_PORT_LOOKUP_LEARN);
+ if (ret)
+ return ret;
}
- return qca8k_rmw(priv, QCA8K_REG_PWS,
- QCA8K_PWS_LED_OPEN_EN_CSR | QCA8K_PWS_POWER_ON_SEL,
- val);
-}
-
-static int
-qca8k_parse_port_config(struct qca8k_priv *priv)
-{
- int port, cpu_port_index = -1, ret;
- struct device_node *port_dn;
- phy_interface_t mode;
- struct dsa_port *dp;
- u32 delay;
-
- /* We have 2 CPU port. Check them */
- for (port = 0; port < QCA8K_NUM_PORTS && cpu_port_index < QCA8K_NUM_CPU_PORTS; port++) {
- /* Skip every other port */
- if (port != 0 && port != 6)
- continue;
-
- dp = dsa_to_port(priv->ds, port);
- port_dn = dp->dn;
- cpu_port_index++;
+ /* Individual user ports get connected to CPU port only */
+ if (dsa_is_user_port(ds, port)) {
+ int shift = 16 * (port % 2);
- if (!of_device_is_available(port_dn))
- continue;
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_MEMBER,
+ BIT(QCA8K_CPU_PORT));
+ if (ret)
+ return ret;
- ret = of_get_phy_mode(port_dn, &mode);
+ /* Enable ARP Auto-learning by default */
+ ret = qca8k_reg_set(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_LEARN);
if (ret)
- continue;
+ return ret;
- switch (mode) {
- case PHY_INTERFACE_MODE_RGMII:
- case PHY_INTERFACE_MODE_RGMII_ID:
- case PHY_INTERFACE_MODE_RGMII_TXID:
- case PHY_INTERFACE_MODE_RGMII_RXID:
- case PHY_INTERFACE_MODE_SGMII:
- delay = 0;
-
- if (!of_property_read_u32(port_dn, "tx-internal-delay-ps", &delay))
- /* Switch regs accept value in ns, convert ps to ns */
- delay = delay / 1000;
- else if (mode == PHY_INTERFACE_MODE_RGMII_ID ||
- mode == PHY_INTERFACE_MODE_RGMII_TXID)
- delay = 1;
-
- if (delay > QCA8K_MAX_DELAY) {
- dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value");
- delay = 3;
- }
-
- priv->ports_config.rgmii_tx_delay[cpu_port_index] = delay;
-
- delay = 0;
-
- if (!of_property_read_u32(port_dn, "rx-internal-delay-ps", &delay))
- /* Switch regs accept value in ns, convert ps to ns */
- delay = delay / 1000;
- else if (mode == PHY_INTERFACE_MODE_RGMII_ID ||
- mode == PHY_INTERFACE_MODE_RGMII_RXID)
- delay = 2;
-
- if (delay > QCA8K_MAX_DELAY) {
- dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value");
- delay = 3;
- }
-
- priv->ports_config.rgmii_rx_delay[cpu_port_index] = delay;
-
- /* Skip sgmii parsing for rgmii* mode */
- if (mode == PHY_INTERFACE_MODE_RGMII ||
- mode == PHY_INTERFACE_MODE_RGMII_ID ||
- mode == PHY_INTERFACE_MODE_RGMII_TXID ||
- mode == PHY_INTERFACE_MODE_RGMII_RXID)
- break;
-
- if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge"))
- priv->ports_config.sgmii_tx_clk_falling_edge = true;
-
- if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge"))
- priv->ports_config.sgmii_rx_clk_falling_edge = true;
-
- if (of_property_read_bool(port_dn, "qca,sgmii-enable-pll")) {
- priv->ports_config.sgmii_enable_pll = true;
-
- if (priv->switch_id == QCA8K_ID_QCA8327) {
- dev_err(priv->dev, "SGMII PLL should NOT be enabled for qca8327. Aborting enabling");
- priv->ports_config.sgmii_enable_pll = false;
- }
-
- if (priv->switch_revision < 2)
- dev_warn(priv->dev, "SGMII PLL should NOT be enabled for qca8337 with revision 2 or more.");
- }
+ /* For port based vlans to work we need to set the
+ * default egress vid
+ */
+ ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(port),
+ 0xfff << shift,
+ QCA8K_PORT_VID_DEF << shift);
+ if (ret)
+ return ret;
- break;
- default:
- continue;
- }
+ ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(port),
+ QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) |
+ QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF));
+ if (ret)
+ return ret;
}
return 0;
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
@@ -1075,40 +520,14 @@ static int
qca8k_setup(struct dsa_switch *ds)
{
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
- int cpu_port, ret, i;
- u32 mask;
+ int ret, i;
- cpu_port = qca8k_find_cpu_port(ds);
- if (cpu_port < 0) {
- dev_err(priv->dev, "No cpu port configured in both cpu port0 and port6");
- return cpu_port;
+ /* Make sure that port 0 is the cpu port */
+ if (!dsa_is_cpu_port(ds, 0)) {
+ dev_err(priv->dev, "port 0 is not the CPU port");
+ return -EINVAL;
}
- /* Parse CPU port config to be later used in phy_link mac_config */
- ret = qca8k_parse_port_config(priv);
- if (ret)
- return ret;
-
- mutex_init(&priv->reg_mutex);
-
- /* Start by setting up the register mapping */
- priv->regmap = devm_regmap_init(ds->dev, NULL, priv,
- &qca8k_regmap_config);
- if (IS_ERR(priv->regmap))
- dev_warn(priv->dev, "regmap initialization failed");
-
- ret = qca8k_setup_mdio_bus(priv);
- if (ret)
- return ret;
-
- ret = qca8k_setup_of_pws_reg(priv);
- if (ret)
- return ret;
-
- ret = qca8k_setup_mac_pwr_sel(priv);
- if (ret)
- return ret;
-
/* Enable CPU Port */
ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0,
QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
@@ -1120,149 +539,53 @@ qca8k_setup(struct dsa_switch *ds)
/* Enable MIB counters */
ret = qca8k_mib_init(priv);
if (ret)
- dev_warn(priv->dev, "mib init failed");
+ dev_warn(priv->dev, "MIB init failed");
+
+ /* Enable QCA header mode on the cpu port */
+ ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(QCA8K_CPU_PORT),
+ QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
+ QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
+ if (ret) {
+ dev_err(priv->dev, "failed enabling QCA header mode");
+ return ret;
+ }
- /* Initial setup of all ports */
+ /* Disable forwarding by default on all ports */
for (i = 0; i < QCA8K_NUM_PORTS; i++) {
- /* Disable forwarding by default on all ports */
ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
QCA8K_PORT_LOOKUP_MEMBER, 0);
if (ret)
return ret;
-
- /* Enable QCA header mode on all cpu ports */
- if (dsa_is_cpu_port(ds, i)) {
- ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i),
- QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
- QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
- if (ret) {
- dev_err(priv->dev, "failed enabling QCA header mode");
- return ret;
- }
- }
-
- /* Disable MAC by default on all user ports */
- if (dsa_is_user_port(ds, i))
- qca8k_port_set_status(priv, i, 0);
}
- /* Forward all unknown frames to CPU port for Linux processing
- * Notice that in multi-cpu config only one port should be set
- * for igmp, unknown, multicast and broadcast packet
- */
+ /* Disable MAC by default on all ports */
+ for (i = 1; i < QCA8K_NUM_PORTS; i++)
+ qca8k_port_set_status(priv, i, 0);
+
+ /* Forward all unknown frames to CPU port for Linux processing */
ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
- BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S |
- BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S |
- BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S |
- BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S);
+ BIT(QCA8K_CPU_PORT) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S |
+ BIT(QCA8K_CPU_PORT) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S |
+ BIT(QCA8K_CPU_PORT) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S |
+ BIT(QCA8K_CPU_PORT) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S);
if (ret)
return ret;
- /* Setup connection between CPU port & user ports
- * Configure specific switch configuration for ports
- */
+ /* Setup connection between CPU port & user ports */
for (i = 0; i < QCA8K_NUM_PORTS; i++) {
- /* CPU port gets connected to all user ports of the switch */
- if (dsa_is_cpu_port(ds, i)) {
- ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
- QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
- if (ret)
- return ret;
- }
-
- /* Individual user ports get connected to CPU port only */
- if (dsa_is_user_port(ds, i)) {
- int shift = 16 * (i % 2);
-
- ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
- QCA8K_PORT_LOOKUP_MEMBER,
- BIT(cpu_port));
- if (ret)
- return ret;
-
- /* Enable ARP Auto-learning by default */
- ret = qca8k_reg_set(priv, QCA8K_PORT_LOOKUP_CTRL(i),
- QCA8K_PORT_LOOKUP_LEARN);
- if (ret)
- return ret;
-
- /* For port based vlans to work we need to set the
- * default egress vid
- */
- ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i),
- 0xfff << shift,
- QCA8K_PORT_VID_DEF << shift);
- if (ret)
- return ret;
-
- ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i),
- QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) |
- QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF));
- if (ret)
- return ret;
- }
-
- /* The port 5 of the qca8337 have some problem in flood condition. The
- * original legacy driver had some specific buffer and priority settings
- * for the different port suggested by the QCA switch team. Add this
- * missing settings to improve switch stability under load condition.
- * This problem is limited to qca8337 and other qca8k switch are not affected.
- */
- if (priv->switch_id == QCA8K_ID_QCA8337) {
- switch (i) {
- /* The 2 CPU port and port 5 requires some different
- * priority than any other ports.
- */
- case 0:
- case 5:
- case 6:
- mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
- QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
- QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x4) |
- QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x4) |
- QCA8K_PORT_HOL_CTRL0_EG_PRI4(0x6) |
- QCA8K_PORT_HOL_CTRL0_EG_PRI5(0x8) |
- QCA8K_PORT_HOL_CTRL0_EG_PORT(0x1e);
- break;
- default:
- mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
- QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
- QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x6) |
- QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x8) |
- QCA8K_PORT_HOL_CTRL0_EG_PORT(0x19);
- }
- qca8k_write(priv, QCA8K_REG_PORT_HOL_CTRL0(i), mask);
-
- mask = QCA8K_PORT_HOL_CTRL1_ING(0x6) |
- QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
- QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
- QCA8K_PORT_HOL_CTRL1_WRED_EN;
- qca8k_rmw(priv, QCA8K_REG_PORT_HOL_CTRL1(i),
- QCA8K_PORT_HOL_CTRL1_ING_BUF |
- QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
- QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
- QCA8K_PORT_HOL_CTRL1_WRED_EN,
- mask);
- }
-
- /* Set initial MTU for every port.
- * We have only have a general MTU setting. So track
- * every port and set the max across all port.
- */
- priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN;
- }
-
- /* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */
- if (priv->switch_id == QCA8K_ID_QCA8327) {
- mask = QCA8K_GLOBAL_FC_GOL_XON_THRES(288) |
- QCA8K_GLOBAL_FC_GOL_XOFF_THRES(496);
- qca8k_rmw(priv, QCA8K_REG_GLOBAL_FC_THRESH,
- QCA8K_GLOBAL_FC_GOL_XON_THRES_S |
- QCA8K_GLOBAL_FC_GOL_XOFF_THRES_S,
- mask);
+ ret = qca8k_setup_port(ds, i);
+ if (ret)
+ return ret;
}
/* Setup our port MTUs to match power on defaults */
+ for (i = 0; i < QCA8K_NUM_PORTS; i++)
+ /* Set per port MTU to 1500 as the MTU change function
+ * will add the overhead and if its set to 1518 then it
+ * will apply the overhead again and we will end up with
+ * MTU of 1536 instead of 1518
+ */
+ priv->port_mtu[i] = ETH_DATA_LEN;
ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN);
if (ret)
dev_warn(priv->dev, "failed setting MTU settings");
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
@@ -1273,48 +596,87 @@ qca8k_setup(struct dsa_switch *ds)
/* We don't have interrupts for link changes, so we need to poll */
ds->pcs_poll = true;
+ /* CPU port HW learning doesnt work correctly, so let DSA handle it */
+ ds->assisted_learning_on_cpu_port = true;
+
return 0;
}
-static void
-qca8k_mac_config_setup_internal_delay(struct qca8k_priv *priv, int cpu_port_index,
- u32 reg)
+static int psgmii_vco_calibrate(struct dsa_switch *ds)
{
- u32 delay, val = 0;
- int ret;
+ struct qca8k_priv *priv = ds->priv;
+ int val, ret;
- /* Delay can be declared in 3 different way.
- * Mode to rgmii and internal-delay standard binding defined
- * rgmii-id or rgmii-tx/rx phy mode set.
- * The parse logic set a delay different than 0 only when one
- * of the 3 different way is used. In all other case delay is
- * not enabled. With ID or TX/RXID delay is enabled and set
- * to the default and recommended value.
- */
- if (priv->ports_config.rgmii_tx_delay[cpu_port_index]) {
- delay = priv->ports_config.rgmii_tx_delay[cpu_port_index];
+ if (!priv->psgmii_ethphy) {
+ dev_err(ds->dev, "PSGMII eth PHY missing, calibration failed!\n");
+ return -ENODEV;
+ }
- val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) |
- QCA8K_PORT_PAD_RGMII_TX_DELAY_EN;
+ /* Fix PSGMII RX 20bit */
+ ret = phy_write(priv->psgmii_ethphy, MII_BMCR, 0x5b);
+ /* Reset PSGMII PHY */
+ ret = phy_write(priv->psgmii_ethphy, MII_BMCR, 0x1b);
+ /* Release reset */
+ ret = phy_write(priv->psgmii_ethphy, MII_BMCR, 0x5b);
+
+ /* Poll for VCO PLL calibration finish */
+ ret = phy_read_mmd_poll_timeout(priv->psgmii_ethphy,
+ MDIO_MMD_PMAPMD,
+ 0x28, val,
+ (val & BIT(0)),
+ 10000, 1000000,
+ false);
+ if (ret) {
+ dev_err(ds->dev, "QCA807x PSGMII VCO calibration PLL not ready\n");
+ return ret;
}
- if (priv->ports_config.rgmii_rx_delay[cpu_port_index]) {
- delay = priv->ports_config.rgmii_rx_delay[cpu_port_index];
+ /* Freeze PSGMII RX CDR */
+ ret = phy_write(priv->psgmii_ethphy, MII_RESV2, 0x2230);
- val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) |
- QCA8K_PORT_PAD_RGMII_RX_DELAY_EN;
+ /* Start PSGMIIPHY VCO PLL calibration */
+ ret = regmap_set_bits(priv->psgmii,
+ PSGMIIPHY_VCO_CALIBRATION_CONTROL_REGISTER_1,
+ PSGMIIPHY_REG_PLL_VCO_CALIB_RESTART);
+
+ /* Poll for PSGMIIPHY PLL calibration finish */
+ ret = regmap_read_poll_timeout(priv->psgmii,
+ PSGMIIPHY_VCO_CALIBRATION_CONTROL_REGISTER_2,
+ val, val & PSGMIIPHY_REG_PLL_VCO_CALIB_READY,
+ 10000, 1000000);
+ if (ret) {
+ dev_err(ds->dev, "PSGMIIPHY VCO calibration PLL not ready\n");
+ return ret;
}
- /* Set RGMII delay based on the selected values */
- ret = qca8k_rmw(priv, reg,
- QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK |
- QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK |
- QCA8K_PORT_PAD_RGMII_TX_DELAY_EN |
- QCA8K_PORT_PAD_RGMII_RX_DELAY_EN,
- val);
- if (ret)
- dev_err(priv->dev, "Failed to set internal delay for CPU port%d",
- cpu_port_index == QCA8K_CPU_PORT0 ? 0 : 6);
+ /* Release PSGMII RX CDR */
+ ret = phy_write(priv->psgmii_ethphy, MII_RESV2, 0x3230);
+
+ /* Release PSGMII RX 20bit */
+ ret = phy_write(priv->psgmii_ethphy, MII_BMCR, 0x5f);
+
+ return ret;
+}
+
+static int ipq4019_psgmii_configure(struct dsa_switch *ds)
+{
+ struct qca8k_priv *priv = ds->priv;
+ int ret;
+
+ if (!priv->psgmii_calibrated) {
+ ret = psgmii_vco_calibrate(ds);
+
+ ret = regmap_clear_bits(priv->psgmii, PSGMIIPHY_MODE_CONTROL,
+ PSGMIIPHY_MODE_ATHR_CSCO_MODE_25M);
+ ret = regmap_write(priv->psgmii, PSGMIIPHY_TX_CONTROL,
+ PSGMIIPHY_TX_CONTROL_MAGIC_VALUE);
+
+ priv->psgmii_calibrated = true;
+
+ return ret;
+ }
+
+ return 0;
}
static void
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
@@ -1322,141 +684,33 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
const struct phylink_link_state *state)
{
struct qca8k_priv *priv = ds->priv;
- int cpu_port_index, ret;
- u32 reg, val;
switch (port) {
- case 0: /* 1st CPU port */
- if (state->interface != PHY_INTERFACE_MODE_RGMII &&
- state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
- state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
- state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
- state->interface != PHY_INTERFACE_MODE_SGMII)
- return;
-
- reg = QCA8K_REG_PORT0_PAD_CTRL;
- cpu_port_index = QCA8K_CPU_PORT0;
- break;
+ case 0:
+ /* CPU port, no configuration needed */
+ return;
case 1:
case 2:
case 3:
+ if (state->interface == PHY_INTERFACE_MODE_PSGMII)
+ if (ipq4019_psgmii_configure(ds))
+ dev_err(ds->dev, "PSGMII configuration failed!\n");
+ return;
case 4:
case 5:
- /* Internal PHY, nothing to do */
- return;
- case 6: /* 2nd CPU port / external PHY */
- if (state->interface != PHY_INTERFACE_MODE_RGMII &&
- state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
- state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
- state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
- state->interface != PHY_INTERFACE_MODE_SGMII &&
- state->interface != PHY_INTERFACE_MODE_1000BASEX)
- return;
-
- reg = QCA8K_REG_PORT6_PAD_CTRL;
- cpu_port_index = QCA8K_CPU_PORT6;
- break;
- default:
- dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port);
- return;
- }
-
- if (port != 6 && phylink_autoneg_inband(mode)) {
- dev_err(ds->dev, "%s: in-band negotiation unsupported\n",
- __func__);
- return;
- }
-
- switch (state->interface) {
- case PHY_INTERFACE_MODE_RGMII:
- case PHY_INTERFACE_MODE_RGMII_ID:
- case PHY_INTERFACE_MODE_RGMII_TXID:
- case PHY_INTERFACE_MODE_RGMII_RXID:
- qca8k_write(priv, reg, QCA8K_PORT_PAD_RGMII_EN);
-
- /* Configure rgmii delay */
- qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
-
- /* QCA8337 requires to set rgmii rx delay for all ports.
- * This is enabled through PORT5_PAD_CTRL for all ports,
- * rather than individual port registers.
- */
- if (priv->switch_id == QCA8K_ID_QCA8337)
- qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
- QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
- break;
- case PHY_INTERFACE_MODE_SGMII:
- case PHY_INTERFACE_MODE_1000BASEX:
- /* Enable SGMII on the port */
- qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
-
- /* Enable/disable SerDes auto-negotiation as necessary */
- ret = qca8k_read(priv, QCA8K_REG_PWS, &val);
- if (ret)
- return;
- if (phylink_autoneg_inband(mode))
- val &= ~QCA8K_PWS_SERDES_AEN_DIS;
- else
- val |= QCA8K_PWS_SERDES_AEN_DIS;
- qca8k_write(priv, QCA8K_REG_PWS, val);
-
- /* Configure the SGMII parameters */
- ret = qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val);
- if (ret)
- return;
-
- val |= QCA8K_SGMII_EN_SD;
-
- if (priv->ports_config.sgmii_enable_pll)
- val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
- QCA8K_SGMII_EN_TX;
-
- if (dsa_is_cpu_port(ds, port)) {
- /* CPU port, we're talking to the CPU MAC, be a PHY */
- val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
- val |= QCA8K_SGMII_MODE_CTRL_PHY;
- } else if (state->interface == PHY_INTERFACE_MODE_SGMII) {
- val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
- val |= QCA8K_SGMII_MODE_CTRL_MAC;
- } else if (state->interface == PHY_INTERFACE_MODE_1000BASEX) {
- val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
- val |= QCA8K_SGMII_MODE_CTRL_BASEX;
+ if (state->interface == PHY_INTERFACE_MODE_RGMII ||
+ state->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ state->interface == PHY_INTERFACE_MODE_RGMII_RXID ||
+ state->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+ qca8k_reg_set(priv, QCA8K_REG_RGMII_CTRL, QCA8K_RGMII_CTRL_CLK);
}
- qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val);
-
- /* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and
- * falling edge is set writing in the PORT0 PAD reg
- */
- if (priv->switch_id == QCA8K_ID_QCA8327 ||
- priv->switch_id == QCA8K_ID_QCA8337)
- reg = QCA8K_REG_PORT0_PAD_CTRL;
-
- val = 0;
-
- /* SGMII Clock phase configuration */
- if (priv->ports_config.sgmii_rx_clk_falling_edge)
- val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE;
-
- if (priv->ports_config.sgmii_tx_clk_falling_edge)
- val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE;
-
- if (val)
- ret = qca8k_rmw(priv, reg,
- QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE |
- QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE,
- val);
-
- /* From original code is reported port instability as SGMII also
- * require delay set. Apply advised values here or take them from DT.
- */
- if (state->interface == PHY_INTERFACE_MODE_SGMII)
- qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
-
- break;
+ if (state->interface == PHY_INTERFACE_MODE_PSGMII)
+ if (ipq4019_psgmii_configure(ds))
+ dev_err(ds->dev, "PSGMII configuration failed!\n");
+ return;
default:
- dev_err(ds->dev, "xMII mode %s not supported for port %d\n",
- phy_modes(state->interface), port);
+ dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port);
return;
}
}
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
@@ -1469,59 +723,49 @@ qca8k_phylink_validate(struct dsa_switch *ds, int port,
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
switch (port) {
- case 0: /* 1st CPU port */
- if (state->interface != PHY_INTERFACE_MODE_NA &&
- state->interface != PHY_INTERFACE_MODE_RGMII &&
- state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
- state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
- state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
- state->interface != PHY_INTERFACE_MODE_SGMII)
+ case 0: /* CPU port */
+ if (state->interface != PHY_INTERFACE_MODE_INTERNAL)
goto unsupported;
break;
case 1:
case 2:
case 3:
- case 4:
- case 5:
- /* Internal PHY */
- if (state->interface != PHY_INTERFACE_MODE_NA &&
- state->interface != PHY_INTERFACE_MODE_GMII &&
- state->interface != PHY_INTERFACE_MODE_INTERNAL)
+ /* Only PSGMII mode is supported */
+ if (state->interface != PHY_INTERFACE_MODE_PSGMII)
goto unsupported;
break;
- case 6: /* 2nd CPU port / external PHY */
- if (state->interface != PHY_INTERFACE_MODE_NA &&
+ case 4:
+ case 5:
+ /* PSGMII and RGMII modes are supported */
+ if (state->interface != PHY_INTERFACE_MODE_PSGMII &&
state->interface != PHY_INTERFACE_MODE_RGMII &&
state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
- state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
- state->interface != PHY_INTERFACE_MODE_SGMII &&
- state->interface != PHY_INTERFACE_MODE_1000BASEX)
+ state->interface != PHY_INTERFACE_MODE_RGMII_TXID)
goto unsupported;
break;
default:
unsupported:
+ dev_warn(ds->dev, "interface '%s' (%d) on port %d is not supported\n",
+ phy_modes(state->interface), state->interface, port);
linkmode_zero(supported);
return;
}
- phylink_set_port_modes(mask);
- phylink_set(mask, Autoneg);
-
- phylink_set(mask, 1000baseT_Full);
- phylink_set(mask, 10baseT_Half);
- phylink_set(mask, 10baseT_Full);
- phylink_set(mask, 100baseT_Half);
- phylink_set(mask, 100baseT_Full);
+ if (port == 0) {
+ phylink_set_port_modes(mask);
- if (state->interface == PHY_INTERFACE_MODE_1000BASEX)
- phylink_set(mask, 1000baseX_Full);
+ phylink_set(mask, 1000baseT_Full);
- phylink_set(mask, Pause);
- phylink_set(mask, Asym_Pause);
+ phylink_set(mask, Pause);
+ phylink_set(mask, Asym_Pause);
- linkmode_and(supported, supported, mask);
- linkmode_and(state->advertising, state->advertising, mask);
+ linkmode_and(supported, supported, mask);
+ linkmode_and(state->advertising, state->advertising, mask);
+ } else {
+ /* Simply copy what PHYs tell us */
+ linkmode_copy(state->advertising, supported);
+ }
}
static int
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
@@ -1895,14 +1139,22 @@ qca8k_port_fdb_dump(struct dsa_switch *ds, int port,
return 0;
}
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,12,0)
static int
qca8k_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
struct switchdev_trans *trans)
+#else
+static int
+qca8k_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
+ struct netlink_ext_ack *extack)
+#endif
{
struct qca8k_priv *priv = ds->priv;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,12,0)
if (switchdev_trans_ph_prepare(trans))
return 0;
+#endif
if (vlan_filtering) {
qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
@@ -1917,39 +1169,70 @@ qca8k_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
return 0;
}
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,12,0)
static int
qca8k_port_vlan_prepare(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan)
{
return 0;
}
+#endif
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,12,0)
static void
qca8k_port_vlan_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan)
+#else
+static int
+qca8k_port_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct netlink_ext_ack *extack)
+#endif
{
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
struct qca8k_priv *priv = ds->priv;
int ret = 0;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,12,0)
u16 vid;
for (vid = vlan->vid_begin; vid <= vlan->vid_end && !ret; ++vid)
ret = qca8k_vlan_add(priv, port, vid, untagged);
-
+#else
+ ret = qca8k_vlan_add(priv, port, vlan->vid, untagged);
+#endif
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,12,0)
if (ret)
dev_err(priv->dev, "Failed to add VLAN to port %d (%d)", port, ret);
+#else
+ if (ret) {
+ dev_err(priv->dev, "Failed to add VLAN to port %d (%d)", port, ret);
+ return ret;
+ }
+#endif
if (pvid) {
int shift = 16 * (port % 2);
qca8k_rmw(priv, QCA8K_EGRESS_VLAN(port),
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,12,0)
0xfff << shift,
vlan->vid_end << shift);
+#else
+ 0xfff << shift, vlan->vid << shift);
+#endif
qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(port),
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,12,0)
QCA8K_PORT_VLAN_CVID(vlan->vid_end) |
QCA8K_PORT_VLAN_SVID(vlan->vid_end));
+#else
+ QCA8K_PORT_VLAN_CVID(vlan->vid) |
+ QCA8K_PORT_VLAN_SVID(vlan->vid));
+#endif
}
+#if LINUX_VERSION_CODE > KERNEL_VERSION(5,12,0)
+ return 0;
+#endif
}
static int
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
@@ -1958,38 +1241,25 @@ qca8k_port_vlan_del(struct dsa_switch *ds, int port,
{
struct qca8k_priv *priv = ds->priv;
int ret = 0;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,12,0)
u16 vid;
for (vid = vlan->vid_begin; vid <= vlan->vid_end && !ret; ++vid)
ret = qca8k_vlan_del(priv, port, vid);
-
+#else
+ ret = qca8k_vlan_del(priv, port, vlan->vid);
+#endif
if (ret)
dev_err(priv->dev, "Failed to delete VLAN from port %d (%d)", port, ret);
return ret;
}
-static u32 qca8k_get_phy_flags(struct dsa_switch *ds, int port)
-{
- struct qca8k_priv *priv = ds->priv;
-
- /* Communicate to the phy internal driver the switch revision.
- * Based on the switch revision different values needs to be
- * set to the dbg and mmd reg on the phy.
- * The first 2 bit are used to communicate the switch revision
- * to the phy driver.
- */
- if (port > 0 && port < 6)
- return priv->switch_revision;
-
- return 0;
-}
-
static enum dsa_tag_protocol
qca8k_get_tag_protocol(struct dsa_switch *ds, int port,
enum dsa_tag_protocol mp)
{
- return DSA_TAG_PROTO_QCA;
+ return DSA_TAG_PROTO_IPQ4019;
}
static const struct dsa_switch_ops qca8k_switch_ops = {
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
@@ -2011,7 +1281,9 @@ static const struct dsa_switch_ops qca8k_switch_ops = {
.port_fdb_del = qca8k_port_fdb_del,
.port_fdb_dump = qca8k_port_fdb_dump,
.port_vlan_filtering = qca8k_port_vlan_filtering,
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,12,0)
.port_vlan_prepare = qca8k_port_vlan_prepare,
+#endif
.port_vlan_add = qca8k_port_vlan_add,
.port_vlan_del = qca8k_port_vlan_del,
.phylink_validate = qca8k_phylink_validate,
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
@@ -2019,172 +1291,127 @@ static const struct dsa_switch_ops qca8k_switch_ops = {
.phylink_mac_config = qca8k_phylink_mac_config,
.phylink_mac_link_down = qca8k_phylink_mac_link_down,
.phylink_mac_link_up = qca8k_phylink_mac_link_up,
- .get_phy_flags = qca8k_get_phy_flags,
};
-static int qca8k_read_switch_id(struct qca8k_priv *priv)
-{
- const struct qca8k_match_data *data;
- u32 val;
- u8 id;
- int ret;
-
- /* get the switches ID from the compatible */
- data = of_device_get_match_data(priv->dev);
- if (!data)
- return -ENODEV;
-
- ret = qca8k_read(priv, QCA8K_REG_MASK_CTRL, &val);
- if (ret < 0)
- return -ENODEV;
-
- id = QCA8K_MASK_CTRL_DEVICE_ID(val & QCA8K_MASK_CTRL_DEVICE_ID_MASK);
- if (id != data->id) {
- dev_err(priv->dev, "Switch id detected %x but expected %x", id, data->id);
- return -ENODEV;
- }
-
- priv->switch_id = id;
-
- /* Save revision to communicate to the internal PHY driver */
- priv->switch_revision = (val & QCA8K_MASK_CTRL_REV_ID_MASK);
-
- return 0;
-}
-
static int
-qca8k_sw_probe(struct mdio_device *mdiodev)
+qca8k_ipq4019_probe(struct platform_device *pdev)
{
struct qca8k_priv *priv;
+ void __iomem *base, *psgmii;
+ struct device_node *np = pdev->dev.of_node, *mdio_np, *psgmii_ethphy_np;
int ret;
- /* allocate the private data struct so that we can probe the switches
- * ID register
- */
- priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
- priv->bus = mdiodev->bus;
- priv->dev = &mdiodev->dev;
+ priv->dev = &pdev->dev;
- priv->reset_gpio = devm_gpiod_get_optional(priv->dev, "reset",
- GPIOD_ASIS);
- if (IS_ERR(priv->reset_gpio))
- return PTR_ERR(priv->reset_gpio);
+ base = devm_platform_ioremap_resource_byname(pdev, "base");
+ if (IS_ERR(base))
+ return PTR_ERR(base);
- if (priv->reset_gpio) {
- gpiod_set_value_cansleep(priv->reset_gpio, 1);
- /* The active low duration must be greater than 10 ms
- * and checkpatch.pl wants 20 ms.
- */
- msleep(20);
- gpiod_set_value_cansleep(priv->reset_gpio, 0);
+ priv->regmap = devm_regmap_init_mmio(priv->dev, base,
+ &qca8k_ipq4019_regmap_config);
+ if (IS_ERR(priv->regmap)) {
+ ret = PTR_ERR(priv->regmap);
+ dev_err(priv->dev, "base regmap initialization failed, %d\n", ret);
+ return ret;
}
- /* Check the detected switch id */
- ret = qca8k_read_switch_id(priv);
- if (ret)
+ psgmii = devm_platform_ioremap_resource_byname(pdev, "psgmii_phy");
+ if (IS_ERR(psgmii))
+ return PTR_ERR(psgmii);
+
+ priv->psgmii = devm_regmap_init_mmio(priv->dev, psgmii,
+ &qca8k_ipq4019_psgmii_phy_regmap_config);
+ if (IS_ERR(priv->psgmii)) {
+ ret = PTR_ERR(priv->psgmii);
+ dev_err(priv->dev, "PSGMII regmap initialization failed, %d\n", ret);
return ret;
+ }
+
+ mdio_np = of_parse_phandle(np, "mdio", 0);
+ if (!mdio_np) {
+ dev_err(&pdev->dev, "unable to get MDIO bus phandle\n");
+ of_node_put(mdio_np);
+ return -EINVAL;
+ }
+
+ priv->bus = of_mdio_find_bus(mdio_np);
+ of_node_put(mdio_np);
+ if (!priv->bus) {
+ dev_err(&pdev->dev, "unable to find MDIO bus\n");
+ return -EPROBE_DEFER;
+ }
- priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
+ psgmii_ethphy_np = of_parse_phandle(np, "psgmii-ethphy", 0);
+ if (!psgmii_ethphy_np) {
+ dev_dbg(&pdev->dev, "unable to get PSGMII eth PHY phandle\n");
+ of_node_put(psgmii_ethphy_np);
+ }
+
+ if (psgmii_ethphy_np) {
+ priv->psgmii_ethphy = of_phy_find_device(psgmii_ethphy_np);
+ of_node_put(psgmii_ethphy_np);
+ if (!priv->psgmii_ethphy) {
+ dev_err(&pdev->dev, "unable to get PSGMII eth PHY\n");
+ return -ENODEV;
+ }
+ }
+
+ priv->ds = devm_kzalloc(priv->dev, sizeof(*priv->ds), GFP_KERNEL);
if (!priv->ds)
return -ENOMEM;
- priv->ds->dev = &mdiodev->dev;
+ priv->ds->dev = priv->dev;
priv->ds->num_ports = QCA8K_NUM_PORTS;
- priv->ds->configure_vlan_while_not_filtering = true;
priv->ds->priv = priv;
priv->ops = qca8k_switch_ops;
priv->ds->ops = &priv->ops;
+
mutex_init(&priv->reg_mutex);
- dev_set_drvdata(&mdiodev->dev, priv);
+ platform_set_drvdata(pdev, priv);
return dsa_register_switch(priv->ds);
}
-static void
-qca8k_sw_remove(struct mdio_device *mdiodev)
+static int
+qca8k_ipq4019_remove(struct platform_device *pdev)
{
- struct qca8k_priv *priv = dev_get_drvdata(&mdiodev->dev);
+ struct qca8k_priv *priv = dev_get_drvdata(&pdev->dev);
int i;
+ if (!priv)
+ return 0;
+
for (i = 0; i < QCA8K_NUM_PORTS; i++)
qca8k_port_set_status(priv, i, 0);
dsa_unregister_switch(priv->ds);
-}
-
-#ifdef CONFIG_PM_SLEEP
-static void
-qca8k_set_pm(struct qca8k_priv *priv, int enable)
-{
- int i;
-
- for (i = 0; i < QCA8K_NUM_PORTS; i++) {
- if (!priv->port_sts[i].enabled)
- continue;
-
- qca8k_port_set_status(priv, i, enable);
- }
-}
-static int qca8k_suspend(struct device *dev)
-{
- struct qca8k_priv *priv = dev_get_drvdata(dev);
-
- qca8k_set_pm(priv, 0);
-
- return dsa_switch_suspend(priv->ds);
-}
+ dev_set_drvdata(&pdev->dev, NULL);
-static int qca8k_resume(struct device *dev)
-{
- struct qca8k_priv *priv = dev_get_drvdata(dev);
-
- qca8k_set_pm(priv, 1);
-
- return dsa_switch_resume(priv->ds);
+ return 0;
}
-#endif /* CONFIG_PM_SLEEP */
-
-static SIMPLE_DEV_PM_OPS(qca8k_pm_ops,
- qca8k_suspend, qca8k_resume);
-
-static const struct qca8k_match_data qca8327 = {
- .id = QCA8K_ID_QCA8327,
- .reduced_package = true,
-};
-
-static const struct qca8k_match_data qca8328 = {
- .id = QCA8K_ID_QCA8327,
-};
-
-static const struct qca8k_match_data qca833x = {
- .id = QCA8K_ID_QCA8337,
-};
-static const struct of_device_id qca8k_of_match[] = {
- { .compatible = "qca,qca8327", .data = &qca8327 },
- { .compatible = "qca,qca8328", .data = &qca8328 },
- { .compatible = "qca,qca8334", .data = &qca833x },
- { .compatible = "qca,qca8337", .data = &qca833x },
+static const struct of_device_id qca8k_ipq4019_of_match[] = {
+ { .compatible = "qca,ipq4019-qca8337n" },
{ /* sentinel */ },
};
-static struct mdio_driver qca8kmdio_driver = {
- .probe = qca8k_sw_probe,
- .remove = qca8k_sw_remove,
- .mdiodrv.driver = {
- .name = "qca8k",
- .of_match_table = qca8k_of_match,
- .pm = &qca8k_pm_ops,
+static struct platform_driver qca8k_ipq4019_driver = {
+ .probe = qca8k_ipq4019_probe,
+ .remove = qca8k_ipq4019_remove,
+ .driver = {
+ .name = "qca8k-ipq4019",
+ .of_match_table = qca8k_ipq4019_of_match,
},
};
-mdio_module_driver(qca8kmdio_driver);
+module_platform_driver(qca8k_ipq4019_driver);
MODULE_AUTHOR("Mathieu Olivari, John Crispin <john@phrozen.org>");
-MODULE_DESCRIPTION("Driver for QCA8K ethernet switch family");
+MODULE_AUTHOR("Gabor Juhos <j4g8y7@gmail.com>, Robert Marko <robert.marko@sartura.hr>");
+MODULE_DESCRIPTION("Qualcomm IPQ4019 built-in switch driver");
MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:qca8k");
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.h
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.h
@@ -8,19 +8,12 @@
#ifndef __QCA8K_H
#define __QCA8K_H
-#include <linux/delay.h>
#include <linux/regmap.h>
-#include <linux/gpio.h>
-#define QCA8K_NUM_PORTS 7
-#define QCA8K_NUM_CPU_PORTS 2
+#define QCA8K_NUM_PORTS 6
+#define QCA8K_CPU_PORT 0
#define QCA8K_MAX_MTU 9000
-#define PHY_ID_QCA8327 0x004dd034
-#define QCA8K_ID_QCA8327 0x12
-#define PHY_ID_QCA8337 0x004dd036
-#define QCA8K_ID_QCA8337 0x13
-
#define QCA8K_BUSY_WAIT_TIMEOUT 2000
#define QCA8K_NUM_FDB_RECORDS 2048
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.h
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.h
@@ -33,46 +26,26 @@
#define QCA8K_MASK_CTRL_REV_ID(x) ((x) >> 0)
#define QCA8K_MASK_CTRL_DEVICE_ID_MASK GENMASK(15, 8)
#define QCA8K_MASK_CTRL_DEVICE_ID(x) ((x) >> 8)
-#define QCA8K_REG_PORT0_PAD_CTRL 0x004
-#define QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE BIT(19)
-#define QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE BIT(18)
-#define QCA8K_REG_PORT5_PAD_CTRL 0x008
-#define QCA8K_REG_PORT6_PAD_CTRL 0x00c
-#define QCA8K_PORT_PAD_RGMII_EN BIT(26)
-#define QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK GENMASK(23, 22)
-#define QCA8K_PORT_PAD_RGMII_TX_DELAY(x) ((x) << 22)
-#define QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK GENMASK(21, 20)
-#define QCA8K_PORT_PAD_RGMII_RX_DELAY(x) ((x) << 20)
-#define QCA8K_PORT_PAD_RGMII_TX_DELAY_EN BIT(25)
-#define QCA8K_PORT_PAD_RGMII_RX_DELAY_EN BIT(24)
-#define QCA8K_MAX_DELAY 3
-#define QCA8K_PORT_PAD_SGMII_EN BIT(7)
-#define QCA8K_REG_PWS 0x010
-#define QCA8K_PWS_POWER_ON_SEL BIT(31)
-/* This reg is only valid for QCA832x and toggle the package
- * type from 176 pin (by default) to 148 pin used on QCA8327
+#define QCA8K_REG_RGMII_CTRL 0x004
+#define QCA8K_RGMII_CTRL_RGMII_RXC GENMASK(1, 0)
+#define QCA8K_RGMII_CTRL_RGMII_TXC GENMASK(9, 8)
+/* Some kind of CLK selection
+ * 0: gcc_ess_dly2ns
+ * 1: gcc_ess_clk
*/
-#define QCA8327_PWS_PACKAGE148_EN BIT(30)
-#define QCA8K_PWS_LED_OPEN_EN_CSR BIT(24)
-#define QCA8K_PWS_SERDES_AEN_DIS BIT(7)
+#define QCA8K_RGMII_CTRL_CLK BIT(10)
+#define QCA8K_RGMII_CTRL_DELAY_RMII0 GENMASK(17, 16)
+#define QCA8K_RGMII_CTRL_INVERT_RMII0_REF_CLK BIT(18)
+#define QCA8K_RGMII_CTRL_DELAY_RMII1 GENMASK(20, 19)
+#define QCA8K_RGMII_CTRL_INVERT_RMII1_REF_CLK BIT(21)
+#define QCA8K_RGMII_CTRL_INVERT_RMII0_MASTER_EN BIT(24)
+#define QCA8K_RGMII_CTRL_INVERT_RMII1_MASTER_EN BIT(25)
#define QCA8K_REG_MODULE_EN 0x030
#define QCA8K_MODULE_EN_MIB BIT(0)
#define QCA8K_REG_MIB 0x034
#define QCA8K_MIB_FLUSH BIT(24)
#define QCA8K_MIB_CPU_KEEP BIT(20)
#define QCA8K_MIB_BUSY BIT(17)
-#define QCA8K_MDIO_MASTER_CTRL 0x3c
-#define QCA8K_MDIO_MASTER_BUSY BIT(31)
-#define QCA8K_MDIO_MASTER_EN BIT(30)
-#define QCA8K_MDIO_MASTER_READ BIT(27)
-#define QCA8K_MDIO_MASTER_WRITE 0
-#define QCA8K_MDIO_MASTER_SUP_PRE BIT(26)
-#define QCA8K_MDIO_MASTER_PHY_ADDR(x) ((x) << 21)
-#define QCA8K_MDIO_MASTER_REG_ADDR(x) ((x) << 16)
-#define QCA8K_MDIO_MASTER_DATA(x) (x)
-#define QCA8K_MDIO_MASTER_DATA_MASK GENMASK(15, 0)
-#define QCA8K_MDIO_MASTER_MAX_PORTS 5
-#define QCA8K_MDIO_MASTER_MAX_REG 32
#define QCA8K_GOL_MAC_ADDR0 0x60
#define QCA8K_GOL_MAC_ADDR1 0x64
#define QCA8K_MAX_FRAME_SIZE 0x78
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.h
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.h
@@ -109,11 +82,6 @@
#define QCA8K_SGMII_MODE_CTRL_PHY (1 << 22)
#define QCA8K_SGMII_MODE_CTRL_MAC (2 << 22)
-/* MAC_PWR_SEL registers */
-#define QCA8K_REG_MAC_PWR_SEL 0x0e4
-#define QCA8K_MAC_PWR_RGMII1_1_8V BIT(18)
-#define QCA8K_MAC_PWR_RGMII0_1_8V BIT(19)
-
/* EEE control registers */
#define QCA8K_REG_EEE_CTRL 0x100
#define QCA8K_REG_EEE_CTRL_LPI_EN(_i) ((_i + 1) * 2)
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.h
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.h
@@ -228,9 +196,15 @@
/* MIB registers */
#define QCA8K_PORT_MIB_COUNTER(_i) (0x1000 + (_i) * 0x100)
-/* QCA specific MII registers */
-#define MII_ATH_MMD_ADDR 0x0d
-#define MII_ATH_MMD_DATA 0x0e
+/* IPQ4019 PSGMII PHY registers */
+#define PSGMIIPHY_MODE_CONTROL 0x1b4
+#define PSGMIIPHY_MODE_ATHR_CSCO_MODE_25M BIT(0)
+#define PSGMIIPHY_TX_CONTROL 0x288
+#define PSGMIIPHY_TX_CONTROL_MAGIC_VALUE 0x8380
+#define PSGMIIPHY_VCO_CALIBRATION_CONTROL_REGISTER_1 0x9c
+#define PSGMIIPHY_REG_PLL_VCO_CALIB_RESTART BIT(14)
+#define PSGMIIPHY_VCO_CALIBRATION_CONTROL_REGISTER_2 0xa0
+#define PSGMIIPHY_REG_PLL_VCO_CALIB_READY BIT(0)
enum {
QCA8K_PORT_SPEED_10M = 0,
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.h
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.h
@@ -260,29 +234,7 @@ struct ar8xxx_port_status {
int enabled;
};
-struct qca8k_match_data {
- u8 id;
- bool reduced_package;
-};
-
-enum {
- QCA8K_CPU_PORT0,
- QCA8K_CPU_PORT6,
-};
-
-struct qca8k_ports_config {
- bool sgmii_rx_clk_falling_edge;
- bool sgmii_tx_clk_falling_edge;
- bool sgmii_enable_pll;
- u8 rgmii_rx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
- u8 rgmii_tx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
-};
-
struct qca8k_priv {
- u8 switch_id;
- u8 switch_revision;
- bool legacy_phy_port_mapping;
- struct qca8k_ports_config ports_config;
struct regmap *regmap;
struct mii_bus *bus;
struct ar8xxx_port_status port_sts[QCA8K_NUM_PORTS];
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.h
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.h
@@ -290,8 +242,12 @@ struct qca8k_priv {
struct mutex reg_mutex;
struct device *dev;
struct dsa_switch_ops ops;
- struct gpio_desc *reset_gpio;
unsigned int port_mtu[QCA8K_NUM_PORTS];
+
+ /* IPQ4019 specific */
+ struct regmap *psgmii;
+ bool psgmii_calibrated;
+ struct phy_device *psgmii_ethphy;
};
struct qca8k_mib_desc {
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.10/705-net-dsa-add-Qualcomm-IPQ4019-built-in-switch-support.patch
@@ -0,0 +1,53 @@
+From b5f71652b85a85ea53162e9e2b760b84fd0d254f Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Mon, 1 Nov 2021 18:10:28 +0100
+Subject: [PATCH] net: dsa: add Qualcomm IPQ4019 built-in switch support
+
+Qualcomm IPQ40xx SoC-s have a variant of QCA8337N switch built-in.
+
+It shares most of the stuff with its external counterpart, however it is
+modified for the SoC.
+Namely, it doesn't have second CPU port (Port 6), so it has 6 ports
+instead of 7.
+It also has no built-in PHY-s but rather requires external PSGMII based
+companion PHY-s (QCA8072 and QCA8075) for which it first needs to carry
+out calibration before using them.
+PSGMII has a SoC built-in PHY that is used to connect to the PHY-s which
+unfortunately requires some magic values as the datasheet doesnt document
+the bits that are being set or the register at all.
+
+Since its built-in it is MMIO like other peripherals and doesn't have its
+own MDIO bus but depends on the SoC provided one.
+
+CPU connection is at Port 0 and it uses some kind of a internal connection
+and no traditional RGMII/SGMII.
+It also doesn't use in-band tagging like other qca8k switches so a shinfo
+based tagger is used.
+
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+---
+ drivers/net/dsa/qca/Kconfig | 9 +++++++++
+ drivers/net/dsa/qca/Makefile | 1 +
+ 2 files changed, 10 insertions(+)
+
+--- a/drivers/net/dsa/qca/Kconfig
++++ b/drivers/net/dsa/qca/Kconfig
+@@ -7,3 +7,12 @@ config NET_DSA_AR9331
+ help
+ This enables support for the Qualcomm Atheros AR9331 built-in Ethernet
+ switch.
++
++config NET_DSA_QCA8K_IPQ4019
++ tristate "Qualcomm Atheros IPQ4019 built-in Ethernet switch support"
++ depends on HAS_IOMEM && NET_DSA
++ select NET_DSA_TAG_IPQ4019
++ select REGMAP
++ help
++ This enables support for the Qualcomm Atheros IPQ4019 SoC built-in
++ Ethernet switch.
+--- a/drivers/net/dsa/qca/Makefile
++++ b/drivers/net/dsa/qca/Makefile
+@@ -1,2 +1,3 @@
+ # SPDX-License-Identifier: GPL-2.0-only
+ obj-$(CONFIG_NET_DSA_AR9331) += ar9331.o
++obj-$(CONFIG_NET_DSA_QCA8K_IPQ4019) += qca8k-ipq4019.o
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.10/706-arm-dts-ipq4019-add-switch-node.patch
@@ -0,0 +1,98 @@
+From ebb62523990a27b3a25e422fa575619f7f725a20 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Mon, 1 Nov 2021 18:15:04 +0100
+Subject: [PATCH] arm: dts: ipq4019: add switch node
+
+Since the built-in IPQ40xx switch now has a driver, add the required node
+for it to work.
+
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 78 +++++++++++++++++++++++++++++
+ 1 file changed, 78 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -590,6 +590,82 @@
+ status = "disabled";
+ };
+
++ switch: switch@c000000 {
++ compatible = "qca,ipq4019-qca8337n";
++ reg = <0xc000000 0x80000>, <0x98000 0x800>;
++ reg-names = "base", "psgmii_phy";
++ resets = <&gcc ESS_PSGMII_ARES>;
++ reset-names = "psgmii_rst";
++ mdio = <&mdio>;
++ psgmii-ethphy = <&psgmiiphy>;
++
++ status = "disabled";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 { /* MAC0 */
++ reg = <0>;
++ label = "cpu";
++ ethernet = <&gmac0>;
++ phy-mode = "internal";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ pause;
++ asym-pause;
++ };
++ };
++
++ swport1: port@1 { /* MAC1 */
++ reg = <1>;
++ label = "lan1";
++ phy-handle = <&ethphy0>;
++ phy-mode = "psgmii";
++
++ status = "disabled";
++ };
++
++ swport2: port@2 { /* MAC2 */
++ reg = <2>;
++ label = "lan2";
++ phy-handle = <&ethphy1>;
++ phy-mode = "psgmii";
++
++ status = "disabled";
++ };
++
++ swport3: port@3 { /* MAC3 */
++ reg = <3>;
++ label = "lan3";
++ phy-handle = <&ethphy2>;
++ phy-mode = "psgmii";
++
++ status = "disabled";
++ };
++
++ swport4: port@4 { /* MAC4 */
++ reg = <4>;
++ label = "lan4";
++ phy-handle = <&ethphy3>;
++ phy-mode = "psgmii";
++
++ status = "disabled";
++ };
++
++ swport5: port@5 { /* MAC5 */
++ reg = <5>;
++ label = "wan";
++ phy-handle = <&ethphy4>;
++ phy-mode = "psgmii";
++
++ status = "disabled";
++ };
++ };
++ };
++
+ gmac0: ethernet@c080000 {
+ compatible = "qcom,ipq4019-ess-edma";
+ reg = <0xc080000 0x8000>;
--- a/target/linux/ipq40xx/patches-5.10/708-arm-dts-ipq4019-QCA807x-properties.patch
+++ b/target/linux/ipq40xx/patches-5.10/709-arm-dts-ipq4019-QCA807x-properties.patch
@@ -20,7 +20,7 @@ Signed-off-by: Robert Marko <robert.marko@sartura.hr>
/ {
#address-cells = <1>;
-@@ -645,22 +646,39 @@
+@@ -726,22 +727,38 @@
ethphy0: ethernet-phy@0 {
reg = <0>;
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.15/705-net-dsa-add-Qualcomm-IPQ4019-built-in-switch-support.patch
@@ -0,0 +1,53 @@
+From b5f71652b85a85ea53162e9e2b760b84fd0d254f Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Mon, 1 Nov 2021 18:10:28 +0100
+Subject: [PATCH] net: dsa: add Qualcomm IPQ4019 built-in switch support
+
+Qualcomm IPQ40xx SoC-s have a variant of QCA8337N switch built-in.
+
+It shares most of the stuff with its external counterpart, however it is
+modified for the SoC.
+Namely, it doesn't have second CPU port (Port 6), so it has 6 ports
+instead of 7.
+It also has no built-in PHY-s but rather requires external PSGMII based
+companion PHY-s (QCA8072 and QCA8075) for which it first needs to carry
+out calibration before using them.
+PSGMII has a SoC built-in PHY that is used to connect to the PHY-s which
+unfortunately requires some magic values as the datasheet doesnt document
+the bits that are being set or the register at all.
+
+Since its built-in it is MMIO like other peripherals and doesn't have its
+own MDIO bus but depends on the SoC provided one.
+
+CPU connection is at Port 0 and it uses some kind of a internal connection
+and no traditional RGMII/SGMII.
+It also doesn't use in-band tagging like other qca8k switches so a shinfo
+based tagger is used.
+
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+---
+ drivers/net/dsa/qca/Kconfig | 9 +++++++++
+ drivers/net/dsa/qca/Makefile | 1 +
+ 2 files changed, 10 insertions(+)
+
+--- a/drivers/net/dsa/qca/Kconfig
++++ b/drivers/net/dsa/qca/Kconfig
+@@ -7,3 +7,12 @@ config NET_DSA_AR9331
+ help
+ This enables support for the Qualcomm Atheros AR9331 built-in Ethernet
+ switch.
++
++config NET_DSA_QCA8K_IPQ4019
++ tristate "Qualcomm Atheros IPQ4019 built-in Ethernet switch support"
++ depends on HAS_IOMEM && NET_DSA
++ select NET_DSA_TAG_IPQ4019
++ select REGMAP
++ help
++ This enables support for the Qualcomm Atheros IPQ4019 SoC built-in
++ Ethernet switch.
+--- a/drivers/net/dsa/qca/Makefile
++++ b/drivers/net/dsa/qca/Makefile
+@@ -1,2 +1,3 @@
+ # SPDX-License-Identifier: GPL-2.0-only
+ obj-$(CONFIG_NET_DSA_AR9331) += ar9331.o
++obj-$(CONFIG_NET_DSA_QCA8K_IPQ4019) += qca8k-ipq4019.o
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.15/706-arm-dts-ipq4019-add-switch-node.patch
@@ -0,0 +1,98 @@
+From ebb62523990a27b3a25e422fa575619f7f725a20 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Mon, 1 Nov 2021 18:15:04 +0100
+Subject: [PATCH] arm: dts: ipq4019: add switch node
+
+Since the built-in IPQ40xx switch now has a driver, add the required node
+for it to work.
+
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 78 +++++++++++++++++++++++++++++
+ 1 file changed, 78 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -590,6 +590,82 @@
+ status = "disabled";
+ };
+
++ switch: switch@c000000 {
++ compatible = "qca,ipq4019-qca8337n";
++ reg = <0xc000000 0x80000>, <0x98000 0x800>;
++ reg-names = "base", "psgmii_phy";
++ resets = <&gcc ESS_PSGMII_ARES>;
++ reset-names = "psgmii_rst";
++ mdio = <&mdio>;
++ psgmii-ethphy = <&psgmiiphy>;
++
++ status = "disabled";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 { /* MAC0 */
++ reg = <0>;
++ label = "cpu";
++ ethernet = <&gmac0>;
++ phy-mode = "internal";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ pause;
++ asym-pause;
++ };
++ };
++
++ swport1: port@1 { /* MAC1 */
++ reg = <1>;
++ label = "lan1";
++ phy-handle = <&ethphy0>;
++ phy-mode = "psgmii";
++
++ status = "disabled";
++ };
++
++ swport2: port@2 { /* MAC2 */
++ reg = <2>;
++ label = "lan2";
++ phy-handle = <&ethphy1>;
++ phy-mode = "psgmii";
++
++ status = "disabled";
++ };
++
++ swport3: port@3 { /* MAC3 */
++ reg = <3>;
++ label = "lan3";
++ phy-handle = <&ethphy2>;
++ phy-mode = "psgmii";
++
++ status = "disabled";
++ };
++
++ swport4: port@4 { /* MAC4 */
++ reg = <4>;
++ label = "lan4";
++ phy-handle = <&ethphy3>;
++ phy-mode = "psgmii";
++
++ status = "disabled";
++ };
++
++ swport5: port@5 { /* MAC5 */
++ reg = <5>;
++ label = "wan";
++ phy-handle = <&ethphy4>;
++ phy-mode = "psgmii";
++
++ status = "disabled";
++ };
++ };
++ };
++
+ gmac0: ethernet@c080000 {
+ compatible = "qcom,ipq4019-ess-edma";
+ reg = <0xc080000 0x8000>;
--- a/target/linux/ipq40xx/config-5.10
+++ b/target/linux/ipq40xx/config-5.10
@@ -180,6 +180,7 @@ CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_74X164=y
CONFIG_GPIO_WATCHDOG=y
CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
+CONFIG_GRO_CELLS=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDEN_BRANCH_PREDICTOR=y
CONFIG_HARDIRQS_SW_RESEND=y
--- a/target/linux/ipq40xx/config-5.10
+++ b/target/linux/ipq40xx/config-5.10
@@ -287,8 +288,13 @@ CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEON=y
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_QCA8K_IPQ4019=y
+CONFIG_NET_DSA_TAG_IPQ4019=y
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_PTP_CLASSIFY=y
+CONFIG_NET_SWITCHDEV=y
CONFIG_NLS=y
CONFIG_NO_HZ=y
CONFIG_NO_HZ_COMMON=y
--- a/target/linux/ipq40xx/config-5.10
+++ b/target/linux/ipq40xx/config-5.10
@@ -326,6 +332,7 @@ CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
+CONFIG_PHYLINK=y
# CONFIG_PHY_QCOM_APQ8064_SATA is not set
CONFIG_PHY_QCOM_IPQ4019_USB=y
# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
--- a/target/linux/ipq40xx/config-5.10
+++ b/target/linux/ipq40xx/config-5.10
@@ -379,6 +386,7 @@ CONFIG_QCOM_BAM_DMA=y
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_HFPLL is not set
# CONFIG_QCOM_IOMMU is not set
+CONFIG_QCOM_IPQ4019_ESS_EDMA=y
# CONFIG_QCOM_LLCC is not set
# CONFIG_QCOM_OCMEM is not set
# CONFIG_QCOM_PDC is not set
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts
@@ -49,7 +49,7 @@
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII4>;
};
tcsr@1957000 {
--- a/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
+++ b/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
@@ -820,6 +820,8 @@ static struct phy_driver qca807x_drivers[] = {
.soft_reset = genphy_soft_reset,
.get_tunable = qca807x_get_tunable,
.set_tunable = qca807x_set_tunable,
+ .resume = genphy_resume,
+ .suspend = genphy_suspend,
#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,8,0)
.cable_test_start = qca807x_cable_test_start,
.cable_test_get_status = qca807x_cable_test_get_status,
--- a/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
+++ b/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
@@ -844,6 +846,8 @@ static struct phy_driver qca807x_drivers[] = {
.soft_reset = genphy_soft_reset,
.get_tunable = qca807x_get_tunable,
.set_tunable = qca807x_set_tunable,
+ .resume = genphy_resume,
+ .suspend = genphy_suspend,
#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,8,0)
.cable_test_start = qca807x_cable_test_start,
.cable_test_get_status = qca807x_cable_test_get_status,
--- a/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
+++ b/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
@@ -12,9 +12,7 @@
#include <linux/of.h>
#include <linux/phy.h>
#include <linux/bitfield.h>
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,8,0)
#include <linux/ethtool_netlink.h>
-#endif
#include <linux/gpio.h>
#include <linux/sfp.h>
--- a/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
+++ b/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
@@ -191,7 +189,6 @@ static int qca807x_set_tunable(struct phy_device *phydev,
}
}
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,8,0)
static bool qca807x_distance_valid(int result)
{
switch (result) {
--- a/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
+++ b/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
@@ -324,16 +321,11 @@ static int qca807x_cable_test_start(struct phy_device *phydev)
return ret;
}
-#endif
#ifdef CONFIG_GPIOLIB
static int qca807x_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
{
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,5,0)
return GPIO_LINE_DIRECTION_OUT;
-#else
- return GPIOF_DIR_OUT;
-#endif
}
static int qca807x_gpio_get_reg(unsigned int offset)
--- a/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
+++ b/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
@@ -804,9 +796,7 @@ static struct phy_driver qca807x_drivers[] = {
{
PHY_ID_MATCH_EXACT(PHY_ID_QCA8072),
.name = "Qualcomm QCA8072",
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,8,0)
.flags = PHY_POLL_CABLE_TEST,
-#endif
/* PHY_GBIT_FEATURES */
.probe = qca807x_probe,
.config_init = qca807x_config,
--- a/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
+++ b/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
@@ -822,17 +812,13 @@ static struct phy_driver qca807x_drivers[] = {
.set_tunable = qca807x_set_tunable,
.resume = genphy_resume,
.suspend = genphy_suspend,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,8,0)
.cable_test_start = qca807x_cable_test_start,
.cable_test_get_status = qca807x_cable_test_get_status,
-#endif
},
{
PHY_ID_MATCH_EXACT(PHY_ID_QCA8075),
.name = "Qualcomm QCA8075",
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,8,0)
.flags = PHY_POLL_CABLE_TEST,
-#endif
/* PHY_GBIT_FEATURES */
.probe = qca807x_probe,
.config_init = qca807x_config,
--- a/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
+++ b/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
@@ -848,10 +834,8 @@ static struct phy_driver qca807x_drivers[] = {
.set_tunable = qca807x_set_tunable,
.resume = genphy_resume,
.suspend = genphy_suspend,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,8,0)
.cable_test_start = qca807x_cable_test_start,
.cable_test_get_status = qca807x_cable_test_get_status,
-#endif
},
{
PHY_ID_MATCH_EXACT(PHY_ID_QCA807X_PSGMII),
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
@@ -602,24 +602,23 @@ qca8k_setup(struct dsa_switch *ds)
return 0;
}
-static int psgmii_vco_calibrate(struct dsa_switch *ds)
+static int psgmii_vco_calibrate(struct qca8k_priv *priv)
{
- struct qca8k_priv *priv = ds->priv;
int val, ret;
if (!priv->psgmii_ethphy) {
- dev_err(ds->dev, "PSGMII eth PHY missing, calibration failed!\n");
+ dev_err(priv->dev, "PSGMII eth PHY missing, calibration failed!\n");
return -ENODEV;
}
/* Fix PSGMII RX 20bit */
ret = phy_write(priv->psgmii_ethphy, MII_BMCR, 0x5b);
- /* Reset PSGMII PHY */
+ /* Reset PHY PSGMII */
ret = phy_write(priv->psgmii_ethphy, MII_BMCR, 0x1b);
- /* Release reset */
+ /* Release PHY PSGMII reset */
ret = phy_write(priv->psgmii_ethphy, MII_BMCR, 0x5b);
- /* Poll for VCO PLL calibration finish */
+ /* Poll for VCO PLL calibration finish - Malibu(QCA8075) */
ret = phy_read_mmd_poll_timeout(priv->psgmii_ethphy,
MDIO_MMD_PMAPMD,
0x28, val,
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
@@ -627,9 +626,10 @@ static int psgmii_vco_calibrate(struct dsa_switch *ds)
10000, 1000000,
false);
if (ret) {
- dev_err(ds->dev, "QCA807x PSGMII VCO calibration PLL not ready\n");
+ dev_err(priv->dev, "QCA807x PSGMII VCO calibration PLL not ready\n");
return ret;
}
+ mdelay(50);
/* Freeze PSGMII RX CDR */
ret = phy_write(priv->psgmii_ethphy, MII_RESV2, 0x2230);
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
@@ -639,32 +639,328 @@ static int psgmii_vco_calibrate(struct dsa_switch *ds)
PSGMIIPHY_VCO_CALIBRATION_CONTROL_REGISTER_1,
PSGMIIPHY_REG_PLL_VCO_CALIB_RESTART);
- /* Poll for PSGMIIPHY PLL calibration finish */
+ /* Poll for PSGMIIPHY PLL calibration finish - Dakota(IPQ40xx) */
ret = regmap_read_poll_timeout(priv->psgmii,
PSGMIIPHY_VCO_CALIBRATION_CONTROL_REGISTER_2,
val, val & PSGMIIPHY_REG_PLL_VCO_CALIB_READY,
10000, 1000000);
if (ret) {
- dev_err(ds->dev, "PSGMIIPHY VCO calibration PLL not ready\n");
+ dev_err(priv->dev, "IPQ PSGMIIPHY VCO calibration PLL not ready\n");
return ret;
}
+ mdelay(50);
/* Release PSGMII RX CDR */
ret = phy_write(priv->psgmii_ethphy, MII_RESV2, 0x3230);
-
/* Release PSGMII RX 20bit */
ret = phy_write(priv->psgmii_ethphy, MII_BMCR, 0x5f);
+ mdelay(200);
return ret;
}
-static int ipq4019_psgmii_configure(struct dsa_switch *ds)
+static void
+qca8k_switch_port_loopback_on_off(struct qca8k_priv *priv, int port, int on)
+{
+ u32 val = QCA8K_PORT_LOOKUP_LOOPBACK;
+
+ if (on == 0)
+ val = 0;
+
+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_LOOPBACK, val);
+}
+
+static int
+qca8k_wait_for_phy_link_state(struct phy_device *phy, int need_status)
+{
+ int a;
+ u16 status;
+
+ for (a = 0; a < 100; a++) {
+ status = phy_read(phy, MII_QCA8075_SSTATUS);
+ status &= QCA8075_PHY_SPEC_STATUS_LINK;
+ status = !!status;
+ if (status == need_status)
+ return 0;
+ mdelay(8);
+ }
+
+ return -1;
+}
+
+static void
+qca8k_phy_loopback_on_off(struct qca8k_priv *priv, struct phy_device *phy,
+ int sw_port, int on)
+{
+ if (on) {
+ phy_write(phy, MII_BMCR, BMCR_ANENABLE | BMCR_RESET);
+ phy_modify(phy, MII_BMCR, BMCR_PDOWN, BMCR_PDOWN);
+ qca8k_wait_for_phy_link_state(phy, 0);
+ qca8k_write(priv, QCA8K_REG_PORT_STATUS(sw_port), 0);
+ phy_write(phy, MII_BMCR,
+ BMCR_SPEED1000 |
+ BMCR_FULLDPLX |
+ BMCR_LOOPBACK);
+ qca8k_wait_for_phy_link_state(phy, 1);
+ qca8k_write(priv, QCA8K_REG_PORT_STATUS(sw_port),
+ QCA8K_PORT_STATUS_SPEED_1000 |
+ QCA8K_PORT_STATUS_TXMAC |
+ QCA8K_PORT_STATUS_RXMAC |
+ QCA8K_PORT_STATUS_DUPLEX);
+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(sw_port),
+ QCA8K_PORT_LOOKUP_STATE_FORWARD,
+ QCA8K_PORT_LOOKUP_STATE_FORWARD);
+ } else { /* off */
+ qca8k_write(priv, QCA8K_REG_PORT_STATUS(sw_port), 0);
+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(sw_port),
+ QCA8K_PORT_LOOKUP_STATE_DISABLED,
+ QCA8K_PORT_LOOKUP_STATE_DISABLED);
+ phy_write(phy, MII_BMCR, BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_RESET);
+ /* turn off the power of the phys - so that unused
+ ports do not raise links */
+ phy_modify(phy, MII_BMCR, BMCR_PDOWN, BMCR_PDOWN);
+ }
+}
+
+static void
+qca8k_phy_pkt_gen_prep(struct qca8k_priv *priv, struct phy_device *phy,
+ int pkts_num, int on)
+{
+ if (on) {
+ /* enable CRC checker and packets counters */
+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_CRC_AND_PKTS_COUNT, 0);
+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_CRC_AND_PKTS_COUNT,
+ QCA8075_MMD7_CNT_FRAME_CHK_EN | QCA8075_MMD7_CNT_SELFCLR);
+ qca8k_wait_for_phy_link_state(phy, 1);
+ /* packet number */
+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_PKT_NUMB, pkts_num);
+ /* pkt size - 1504 bytes + 20 bytes */
+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_PKT_SIZE, 1504);
+ } else { /* off */
+ /* packet number */
+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_PKT_NUMB, 0);
+ /* disable CRC checker and packet counter */
+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_CRC_AND_PKTS_COUNT, 0);
+ /* disable traffic gen */
+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_CTRL, 0);
+ }
+}
+
+static void
+qca8k_wait_for_phy_pkt_gen_fin(struct qca8k_priv *priv, struct phy_device *phy)
+{
+ int val;
+ /* wait for all traffic end: 4096(pkt num)*1524(size)*8ns(125MHz)=49938us */
+ phy_read_mmd_poll_timeout(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_CTRL,
+ val, !(val & QCA8075_MMD7_PKT_GEN_INPROGR),
+ 50000, 1000000, true);
+}
+
+static void
+qca8k_start_phy_pkt_gen(struct phy_device *phy)
+{
+ /* start traffic gen */
+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_CTRL,
+ QCA8075_MMD7_PKT_GEN_START | QCA8075_MMD7_PKT_GEN_INPROGR);
+}
+
+static int
+qca8k_start_all_phys_pkt_gens(struct qca8k_priv *priv)
+{
+ struct phy_device *phy;
+ phy = phy_device_create(priv->bus, QCA8075_MDIO_BRDCST_PHY_ADDR,
+ 0, 0, NULL);
+ if (!phy) {
+ dev_err(priv->dev, "unable to create mdio broadcast PHY(0x%x)\n",
+ QCA8075_MDIO_BRDCST_PHY_ADDR);
+ return -ENODEV;
+ }
+
+ qca8k_start_phy_pkt_gen(phy);
+
+ phy_device_free(phy);
+ return 0;
+}
+
+static int
+qca8k_get_phy_pkt_gen_test_result(struct phy_device *phy, int pkts_num)
+{
+ u32 tx_ok, tx_error;
+ u32 rx_ok, rx_error;
+ u32 tx_ok_high16;
+ u32 rx_ok_high16;
+ u32 tx_all_ok, rx_all_ok;
+
+ /* check counters */
+ tx_ok = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_EG_FRAME_RECV_CNT_LO);
+ tx_ok_high16 = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_EG_FRAME_RECV_CNT_HI);
+ tx_error = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_EG_FRAME_ERR_CNT);
+ rx_ok = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_IG_FRAME_RECV_CNT_LO);
+ rx_ok_high16 = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_IG_FRAME_RECV_CNT_HI);
+ rx_error = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_IG_FRAME_ERR_CNT);
+ tx_all_ok = tx_ok + (tx_ok_high16 << 16);
+ rx_all_ok = rx_ok + (rx_ok_high16 << 16);
+
+ if (tx_all_ok < pkts_num)
+ return -1;
+ if(rx_all_ok < pkts_num)
+ return -2;
+ if(tx_error)
+ return -3;
+ if(rx_error)
+ return -4;
+ return 0; /* test is ok */
+}
+
+static
+void qca8k_phy_broadcast_write_on_off(struct qca8k_priv *priv,
+ struct phy_device *phy, int on)
+{
+ u32 val;
+
+ val = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_MDIO_BRDCST_WRITE);
+
+ if (on == 0)
+ val &= ~QCA8075_MMD7_MDIO_BRDCST_WRITE_EN;
+ else
+ val |= QCA8075_MMD7_MDIO_BRDCST_WRITE_EN;
+
+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_MDIO_BRDCST_WRITE, val);
+}
+
+static int
+qca8k_test_dsa_port_for_errors(struct qca8k_priv *priv, struct phy_device *phy,
+ int port, int test_phase)
+{
+ int res = 0;
+ const int test_pkts_num = QCA8075_PKT_GEN_PKTS_COUNT;
+
+ if (test_phase == 1) { /* start test preps */
+ qca8k_phy_loopback_on_off(priv, phy, port, 1);
+ qca8k_switch_port_loopback_on_off(priv, port, 1);
+ qca8k_phy_broadcast_write_on_off(priv, phy, 1);
+ qca8k_phy_pkt_gen_prep(priv, phy, test_pkts_num, 1);
+ } else if (test_phase == 2) {
+ /* wait for test results, collect it and cleanup */
+ qca8k_wait_for_phy_pkt_gen_fin(priv, phy);
+ res = qca8k_get_phy_pkt_gen_test_result(phy, test_pkts_num);
+ qca8k_phy_pkt_gen_prep(priv, phy, test_pkts_num, 0);
+ qca8k_phy_broadcast_write_on_off(priv, phy, 0);
+ qca8k_switch_port_loopback_on_off(priv, port, 0);
+ qca8k_phy_loopback_on_off(priv, phy, port, 0);
+ }
+
+ return res;
+}
+
+static int
+qca8k_do_dsa_sw_ports_self_test(struct qca8k_priv *priv, int parallel_test)
+{
+ struct device_node *dn = priv->dev->of_node;
+ struct device_node *ports, *port;
+ struct device_node *phy_dn;
+ struct phy_device *phy;
+ int reg, err = 0, test_phase;
+ u32 tests_result = 0;
+
+ ports = of_get_child_by_name(dn, "ports");
+ if (!ports) {
+ dev_err(priv->dev, "no ports child node found\n");
+ return -EINVAL;
+ }
+
+ for (test_phase = 1; test_phase <= 2; test_phase++) {
+ if (parallel_test && test_phase == 2) {
+ err = qca8k_start_all_phys_pkt_gens(priv);
+ if (err)
+ goto error;
+ }
+ for_each_available_child_of_node(ports, port) {
+ err = of_property_read_u32(port, "reg", &reg);
+ if (err)
+ goto error;
+ if (reg >= QCA8K_NUM_PORTS) {
+ err = -EINVAL;
+ goto error;
+ }
+ phy_dn = of_parse_phandle(port, "phy-handle", 0);
+ if (phy_dn) {
+ phy = of_phy_find_device(phy_dn);
+ of_node_put(phy_dn);
+ if (phy) {
+ int result;
+ result = qca8k_test_dsa_port_for_errors(priv,
+ phy, reg, test_phase);
+ if (!parallel_test && test_phase == 1)
+ qca8k_start_phy_pkt_gen(phy);
+ put_device(&phy->mdio.dev);
+ if (test_phase == 2) {
+ tests_result <<= 1;
+ if (result)
+ tests_result |= 1;
+ }
+ }
+ }
+ }
+ }
+
+end:
+ of_node_put(ports);
+ qca8k_fdb_flush(priv);
+ return tests_result;
+error:
+ tests_result |= 0xf000;
+ goto end;
+}
+
+static int
+psgmii_vco_calibrate_and_test(struct dsa_switch *ds)
+{
+ int ret, a, test_result;
+ struct qca8k_priv *priv = ds->priv;
+
+ for (a = 0; a <= QCA8K_PSGMII_CALB_NUM; a++) {
+ ret = psgmii_vco_calibrate(priv);
+ if (ret)
+ return ret;
+ /* first we run serial test */
+ test_result = qca8k_do_dsa_sw_ports_self_test(priv, 0);
+ /* and if it is ok then we run the test in parallel */
+ if (!test_result)
+ test_result = qca8k_do_dsa_sw_ports_self_test(priv, 1);
+ if (!test_result) {
+ if (a > 0) {
+ dev_warn(priv->dev, "PSGMII work was stabilized after %d "
+ "calibration retries !\n", a);
+ }
+ return 0;
+ } else {
+ schedule();
+ if (a > 0 && a % 10 == 0) {
+ dev_err(priv->dev, "PSGMII work is unstable !!! "
+ "Let's try to wait a bit ... %d\n", a);
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(msecs_to_jiffies(a * 100));
+ }
+ }
+ }
+
+ panic("PSGMII work is unstable !!! "
+ "Repeated recalibration attempts did not help(0x%x) !\n",
+ test_result);
+
+ return -EFAULT;
+}
+
+static int
+ipq4019_psgmii_configure(struct dsa_switch *ds)
{
struct qca8k_priv *priv = ds->priv;
int ret;
if (!priv->psgmii_calibrated) {
- ret = psgmii_vco_calibrate(ds);
+ ret = psgmii_vco_calibrate_and_test(ds);
ret = regmap_clear_bits(priv->psgmii, PSGMIIPHY_MODE_CONTROL,
PSGMIIPHY_MODE_ATHR_CSCO_MODE_25M);
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.h
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.h
@@ -150,6 +150,7 @@
#define QCA8K_PORT_LOOKUP_STATE_FORWARD (4 << 16)
#define QCA8K_PORT_LOOKUP_STATE GENMASK(18, 16)
#define QCA8K_PORT_LOOKUP_LEARN BIT(20)
+#define QCA8K_PORT_LOOKUP_LOOPBACK BIT(21)
#define QCA8K_REG_GLOBAL_FC_THRESH 0x800
#define QCA8K_GLOBAL_FC_GOL_XON_THRES(x) ((x) << 16)
--- a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.h
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.h
@@ -206,6 +207,28 @@
#define PSGMIIPHY_VCO_CALIBRATION_CONTROL_REGISTER_2 0xa0
#define PSGMIIPHY_REG_PLL_VCO_CALIB_READY BIT(0)
+#define QCA8K_PSGMII_CALB_NUM 100
+#define MII_QCA8075_SSTATUS 0x11
+#define QCA8075_PHY_SPEC_STATUS_LINK BIT(10)
+#define QCA8075_MMD7_CRC_AND_PKTS_COUNT 0x8029
+#define QCA8075_MMD7_PKT_GEN_PKT_NUMB 0x8021
+#define QCA8075_MMD7_PKT_GEN_PKT_SIZE 0x8062
+#define QCA8075_MMD7_PKT_GEN_CTRL 0x8020
+#define QCA8075_MMD7_CNT_SELFCLR BIT(1)
+#define QCA8075_MMD7_CNT_FRAME_CHK_EN BIT(0)
+#define QCA8075_MMD7_PKT_GEN_START BIT(13)
+#define QCA8075_MMD7_PKT_GEN_INPROGR BIT(15)
+#define QCA8075_MMD7_IG_FRAME_RECV_CNT_HI 0x802a
+#define QCA8075_MMD7_IG_FRAME_RECV_CNT_LO 0x802b
+#define QCA8075_MMD7_IG_FRAME_ERR_CNT 0x802c
+#define QCA8075_MMD7_EG_FRAME_RECV_CNT_HI 0x802d
+#define QCA8075_MMD7_EG_FRAME_RECV_CNT_LO 0x802e
+#define QCA8075_MMD7_EG_FRAME_ERR_CNT 0x802f
+#define QCA8075_MMD7_MDIO_BRDCST_WRITE 0x8028
+#define QCA8075_MMD7_MDIO_BRDCST_WRITE_EN BIT(15)
+#define QCA8075_MDIO_BRDCST_PHY_ADDR 0x1f
+#define QCA8075_PKT_GEN_PKTS_COUNT 4096
+
enum {
QCA8K_PORT_SPEED_10M = 0,
QCA8K_PORT_SPEED_100M = 1,
--- a/target/linux/ipq40xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ipq40xx/base-files/etc/board.d/01_leds
@@ -10,7 +10,7 @@ board=$(board_name)
case "$board" in
alfa-network,ap120c-ac)
- ucidef_set_led_netdev "wan" "WAN" "amber:wan" "eth1"
+ ucidef_set_led_netdev "wan" "WAN" "amber:wan" "wan"
;;
asus,rt-ac42u)
ucidef_set_led_switch "lan1" "LAN1" "blue:lan-1" "switch0" "0x02"
--- a/target/linux/ipq40xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ipq40xx/base-files/etc/board.d/01_leds
@@ -24,7 +24,7 @@ asus,rt-ac58u)
;;
avm,fritzbox-4040)
ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt" "phy1tpt"
- ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
+ ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan"
ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x1e"
;;
avm,fritzbox-7530 |\
--- a/target/linux/ipq40xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ipq40xx/base-files/etc/board.d/01_leds
@@ -55,17 +55,17 @@ engenius,ens620ext)
mikrotik,cap-ac)
ucidef_set_led_default "power" "POWER" "blue:power" "1"
ucidef_set_led_default "user" "USER" "green:user" "0"
- ucidef_set_led_switch "eth1" "ETH1" "green:eth1" "switch0" "0x20"
- ucidef_set_led_switch "eth2" "ETH2" "green:eth2" "switch0" "0x10"
+ ucidef_set_led_netdev "eth1" "ETH1" "green:eth1" "wan"
+ ucidef_set_led_netdev "eth2" "ETH2" "green:eth2" "lan"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
;;
mikrotik,hap-ac3)
- ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
- ucidef_set_led_switch "lan1" "LAN1" "green:lan1" "switch0" "0x10"
- ucidef_set_led_switch "lan2" "LAN2" "green:lan2" "switch0" "0x08"
- ucidef_set_led_switch "lan3" "LAN3" "green:lan3" "switch0" "0x04"
- ucidef_set_led_switch "lan4" "LAN4" "green:lan4" "switch0" "0x02"
+ ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth0"
+ ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "lan1"
+ ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "lan2"
+ ucidef_set_led_netdev "lan3" "LAN3" "green:lan3" "lan3"
+ ucidef_set_led_netdev "lan4" "LAN4" "green:lan4" "lan4"
ucidef_set_led_gpio "poe" "POE" "red:poe" "452" "0"
;;
mikrotik,sxtsq-5-ac)
--- /dev/null
+++ b/target/linux/ipq40xx/base-files/etc/board.d/05_compat-version
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2022 OpenWrt.org
+#
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+ *)
+ ucidef_set_compat_version "1.1"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
+++ b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
@@ -21,8 +21,8 @@ preinit_set_mac_address() {
linksys,ea8300|\
linksys,mr8300)
base_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
- ip link set dev eth0 address "$base_mac"
- ip link set dev eth1 address $(macaddr_add "$base_mac" 1)
+ ip link set dev lan1 address $(macaddr_add "$base_mac" 1)
+ ip link set dev eth0 address $(macaddr_setbit "$base_mac" 7)
;;
meraki,mr33|\
meraki,mr74)
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
@@ -14,6 +14,7 @@
led-failsafe = &status;
led-running = &status;
led-upgrade = &status;
+ ethernet1 = &swport5;
};
keys {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
@@ -320,6 +321,24 @@
status = "okay";
};
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport4 {
+ status = "okay";
+
+ label = "lan";
+};
+
+&swport5 {
+ status = "okay";
+};
+
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cap-ac.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cap-ac.dts
@@ -222,6 +222,24 @@
#gpio-cells = <2>;
};
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport4 {
+ status = "okay";
+
+ label = "lan";
+};
+
+&swport5 {
+ status = "okay";
+};
+
&wifi0 {
status = "okay";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts
@@ -102,6 +102,34 @@
status = "okay";
};
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport1 {
+ status = "okay";
+};
+
+&swport2 {
+ status = "okay";
+};
+
+&swport3 {
+ status = "okay";
+};
+
+&swport4 {
+ status = "okay";
+};
+
+&swport5 {
+ status = "okay";
+};
+
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts
@@ -14,6 +14,8 @@
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
+ ethernet0 = &swport5;
+ ethernet1 = &gmac0;
};
chosen {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts
@@ -287,6 +289,24 @@
pinctrl-names = "default";
};
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport4 {
+ status = "okay";
+
+ label = "lan";
+};
+
+&swport5 {
+ status = "okay";
+};
+
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts
@@ -273,6 +273,34 @@
#gpio-cells = <2>;
};
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport1 {
+ status = "okay";
+};
+
+&swport2 {
+ status = "okay";
+};
+
+&swport3 {
+ status = "okay";
+};
+
+&swport4 {
+ status = "okay";
+};
+
+&swport5 {
+ status = "okay";
+};
+
&usb3_ss_phy {
status = "okay";
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts
@@ -251,6 +251,38 @@
qcom,single-led-10;
};
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport1 {
+ status = "okay";
+ label = "lan4";
+};
+
+&swport2 {
+ status = "okay";
+ label = "lan3";
+};
+
+&swport3 {
+ status = "okay";
+ label = "lan2";
+};
+
+&swport4 {
+ status = "okay";
+ label = "lan1";
+};
+
+&swport5 {
+ status = "okay";
+};
+
&wifi0 {
status = "okay";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
@@ -7,6 +7,10 @@
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
+ aliases {
+ ethernet1 = &swport5;
+ };
+
soc {
rng@22000 {
status = "okay";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
@@ -227,6 +231,24 @@
status = "okay";
};
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport4 {
+ status = "okay";
+
+ label = "lan";
+};
+
+&swport5 {
+ status = "okay";
+};
+
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
@@ -302,6 +302,42 @@
status = "okay";
};
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport1 {
+ status = "okay";
+
+ label = "lan4";
+};
+
+&swport2 {
+ status = "okay";
+
+ label = "lan3";
+};
+
+&swport3 {
+ status = "okay";
+
+ label = "lan2";
+};
+
+&swport4 {
+ status = "okay";
+
+ label = "lan1";
+};
+
+&swport5 {
+ status = "okay";
+};
+
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
@@ -277,6 +277,34 @@
status = "okay";
};
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport1 {
+ status = "okay";
+};
+
+&swport2 {
+ status = "okay";
+};
+
+&swport3 {
+ status = "okay";
+};
+
+&swport4 {
+ status = "okay";
+};
+
+&swport5 {
+ status = "okay";
+};
+
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "RT-AC58U";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts
@@ -220,3 +220,20 @@
&mdio {
status = "okay";
};
+
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+
+ /delete-property/ psgmii-ethphy;
+};
+
+&swport5 {
+ status = "okay";
+
+ label = "lan";
+ phy-mode = "rgmii";
+};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts
@@ -16,6 +16,7 @@
led-failsafe = &led_power_amber;
led-running = &led_power_green;
led-upgrade = &led_power_amber;
+ ethernet1 = &swport5;
};
chosen {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts
@@ -336,6 +337,24 @@
status = "okay";
};
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport4 {
+ status = "okay";
+
+ label = "lan";
+};
+
+&swport5 {
+ status = "okay";
+};
+
&mdio {
status = "okay";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts
@@ -262,6 +262,30 @@
status = "okay";
};
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport1 {
+ status = "okay";
+};
+
+&swport2 {
+ status = "okay";
+};
+
+&swport3 {
+ status = "okay";
+};
+
+&swport4 {
+ status = "okay";
+};
+
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
@@ -26,6 +26,10 @@
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
+
+ ethphy: ethernet-phy@0 {
+ reg = <0x0>;
+ };
};
tcsr@1949000 {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
@@ -237,8 +241,32 @@
status = "okay";
};
-&ethphy0 {
- status = "disabled";
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
+};
+
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+
+ /delete-property/ psgmii-ethphy;
+};
+
+&swport5 {
+ status = "okay";
+
+ label = "lan";
+ phy-handle = <&ethphy>;
+ phy-mode = "rgmii-id";
};
&ethphy1 {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts
@@ -18,6 +18,10 @@
bootargs-append = " root=/dev/mmcblk0p2 rw rootwait clk_ignore_unused";
};
+ aliases {
+ ethernet1 = &swport4;
+ };
+
soc {
rng@22000 {
status = "okay";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts
@@ -346,6 +350,26 @@
};
};
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport4 {
+ status = "okay";
+
+ label = "wan";
+};
+
+&swport5 {
+ status = "okay";
+
+ label = "lan";
+};
+
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
@@ -15,6 +15,7 @@
led-failsafe = &led_status;
led-running = &led_status;
led-upgrade = &led_upgrade;
+ ethernet1 = &swport5;
};
soc {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
@@ -331,6 +332,34 @@
};
};
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport1 {
+ status = "okay";
+};
+
+&swport2 {
+ status = "okay";
+};
+
+&swport3 {
+ status = "okay";
+};
+
+&swport4 {
+ status = "okay";
+};
+
+&swport5 {
+ status = "okay";
+};
+
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-hap-ac3.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-hap-ac3.dts
@@ -306,6 +306,38 @@
status = "okay";
};
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport1 {
+ status = "okay";
+ label = "lan4";
+};
+
+&swport2 {
+ status = "okay";
+ label = "lan3";
+};
+
+&swport3 {
+ status = "okay";
+ label = "lan2";
+};
+
+&swport4 {
+ status = "okay";
+ label = "lan1";
+};
+
+&swport5 {
+ status = "okay";
+};
+
&wifi0 {
status = "okay";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts
@@ -261,3 +261,21 @@
&psgmiiphy {
status = "disabled";
};
+
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+
+ /delete-property/ psgmii-ethphy;
+};
+
+&swport5 {
+ status = "okay";
+
+ label = "lan";
+ phy-handle = <&ethphy0>;
+ phy-mode = "rgmii-id";
+};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts
@@ -15,6 +15,7 @@
led-failsafe = &led_red0;
led-running = &led_blue0;
led-upgrade = &led_red0;
+ ethernet1 = &swport4;
};
soc {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts
@@ -340,3 +341,23 @@
pinctrl-names = "default";
status = "okay";
};
+
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport4 {
+ status = "okay";
+
+ label = "wan";
+};
+
+&swport5 {
+ status = "okay";
+
+ label = "lan";
+};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mf286d.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mf286d.dts
@@ -217,6 +217,12 @@
status = "okay";
};
+&gmac0 {
+ status = "okay";
+ nvmem-cell-names = "mac-address";
+ nvmem-cells = <&macaddr_config_0>;
+};
+
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mf286d.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mf286d.dts
@@ -319,6 +325,36 @@
status = "okay";
};
+&switch {
+ status = "okay";
+};
+
+&swport2 {
+ status = "okay";
+
+ label = "lan4";
+};
+
+&swport3 {
+ status = "okay";
+
+ label = "lan3";
+};
+
+&swport4 {
+ status = "okay";
+
+ label = "lan2";
+};
+
+&swport5 {
+ status = "okay";
+
+ nvmem-cell-names = "mac-address";
+ nvmem-cells = <&macaddr_config_0>;
+ mac-address-increment = <1>;
+};
+
&tlmm {
i2c_0_pins: i2c_0_pinmux {
mux {
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi
@@ -320,6 +320,42 @@
qcom,single-led-10;
};
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport1 {
+ status = "okay";
+
+ label = "lan4";
+};
+
+&swport2 {
+ status = "okay";
+
+ label = "lan3";
+};
+
+&swport3 {
+ status = "okay";
+
+ label = "lan2";
+};
+
+&swport4 {
+ status = "okay";
+
+ label = "lan1";
+};
+
+&swport5 {
+ status = "okay";
+};
+
&usb3_ss_phy {
status = "okay";
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts
@@ -371,3 +371,23 @@
status = "okay";
qcom,ath10k-calibration-variant = "cellc,rtl30vw";
};
+
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport3 {
+ status = "okay";
+
+ label = "lan2";
+};
+
+&swport4 {
+ status = "okay";
+
+ label = "lan1";
+};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi
@@ -3,7 +3,7 @@
/*
* Device Tree Source for Linksys xx8300 (Dallas)
*
- * Copyright (C) 2019 Jeff Kletsky
+ * Copyright (C) 2019, 2022 Jeff Kletsky
* Updated 2020 Hans Geiblinger
*
*/
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi
@@ -286,3 +286,31 @@
&usb3_ss_phy {
status = "okay";
};
+
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport1 {
+ status = "okay";
+};
+
+&swport2 {
+ status = "okay";
+};
+
+&swport3 {
+ status = "okay";
+};
+
+&swport4 {
+ status = "okay";
+};
+
+&swport5 {
+ status = "okay";
+};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
@@ -227,6 +227,14 @@
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
+
+ macaddr_art_e010: mac-address@e010 {
+ reg = <0xe010 0x6>;
+ };
+
+ macaddr_art_e018: mac-address@e018 {
+ reg = <0xe018 0x6>;
+ };
};
partition6@180000 {
compatible = "denx,fit";
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
@@ -247,6 +255,30 @@
status = "okay";
};
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport4 {
+ status = "okay";
+ label = "lan1";
+
+ nvmem-cells = <&macaddr_art_e018>;
+ nvmem-cell-names = "mac-address";
+};
+
+&swport5 {
+ status = "okay";
+ label = "lan2";
+
+ nvmem-cells = <&macaddr_art_e010>;
+ nvmem-cell-names = "mac-address";
+};
+
&usb3_ss_phy {
status = "okay";
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
@@ -21,7 +21,7 @@
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
- ethernet-phy@5 {
+ ethphy: ethernet-phy@5 {
reg = <0x5>;
};
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
@@ -214,6 +214,24 @@
};
};
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+
+ /delete-property/ psgmii-ethphy;
+};
+
+&swport5 {
+ status = "okay";
+
+ label = "lan";
+ phy-handle = <&ethphy>;
+ phy-mode = "rgmii-id";
+};
+
&ethphy0 {
status = "disabled";
};
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
@@ -266,6 +266,30 @@
status = "okay";
};
+&gmac0 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport3 {
+ status = "okay";
+
+ label = "lan2";
+};
+
+&swport4 {
+ status = "okay";
+
+ label = "lan1";
+};
+
+&swport5 {
+ status = "okay";
+};
+
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
--- a/target/linux/ipq40xx/image/Makefile
+++ b/target/linux/ipq40xx/image/Makefile
@@ -10,6 +10,8 @@ define Device/Default
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
IMAGE/sysupgrade.bin/squashfs :=
+ DEVICE_COMPAT_VERSION := 1.1
+ DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
endef
include $(SUBTARGET).mk
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -13,7 +13,6 @@ case "$FIRMWARE" in
meraki,mr74)
caldata_extract_ubi "ART" 0x9000 0x844
caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
- ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 1)
;;
esac
;;
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -117,7 +116,6 @@ case "$FIRMWARE" in
meraki,mr74)
caldata_extract_ubi "ART" 0x1000 0x2f20
caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
- ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 2)
;;
mikrotik,cap-ac |\
mikrotik,hap-ac2 |\
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -207,7 +205,6 @@ case "$FIRMWARE" in
meraki,mr74)
caldata_extract_ubi "ART" 0x5000 0x2f20
caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
- ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 3)
;;
mikrotik,cap-ac |\
mikrotik,hap-ac2 |\
--- a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/ipqess/ipqess.c
+++ b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/ipqess/ipqess.c
@@ -542,10 +542,10 @@ static irqreturn_t ipqess_interrupt_tx(int irq, void *priv)
struct ipqess_tx_ring *tx_ring = (struct ipqess_tx_ring *) priv;
if (likely(napi_schedule_prep(&tx_ring->napi_tx))) {
- __napi_schedule(&tx_ring->napi_tx);
ipqess_w32(tx_ring->ess,
IPQESS_REG_TX_INT_MASK_Q(tx_ring->idx),
0x0);
+ __napi_schedule(&tx_ring->napi_tx);
}
return IRQ_HANDLED;
--- a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/ipqess/ipqess.c
+++ b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/ipqess/ipqess.c
@@ -556,10 +556,10 @@ static irqreturn_t ipqess_interrupt_rx(int irq, void *priv)
struct ipqess_rx_ring *rx_ring = (struct ipqess_rx_ring *) priv;
if (likely(napi_schedule_prep(&rx_ring->napi_rx))) {
- __napi_schedule(&rx_ring->napi_rx);
ipqess_w32(rx_ring->ess,
IPQESS_REG_RX_INT_MASK_Q(rx_ring->idx),
0x0);
+ __napi_schedule(&rx_ring->napi_rx);
}
return IRQ_HANDLED;
--- a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/ipqess/ipqess.c
+++ b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/ipqess/ipqess.c
@@ -1269,6 +1269,8 @@ static int ipqess_axi_probe(struct platform_device *pdev)
if (err)
goto err_out;
+ dev_set_threaded(netdev, true);
+
for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) {
int qid;
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.10/903-dts-remove.patch
@@ -0,0 +1,57 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -905,13 +905,11 @@
+ qcom-apq8084-ifc6540.dtb \
+ qcom-apq8084-mtp.dtb \
+ qcom-ipq4018-a42.dtb \
+- qcom-ipq4018-ap120c-ac.dtb \
+ qcom-ipq4018-dap-2610.dtb \
+ qcom-ipq4018-cs-w3-wd1200g-eup.dtb \
+ qcom-ipq4018-magic-2-wifi-next.dtb \
+ qcom-ipq4018-ea6350v3.dtb \
+ qcom-ipq4018-eap1300.dtb \
+- qcom-ipq4018-ecw5211.dtb \
+ qcom-ipq4018-emd1.dtb \
+ qcom-ipq4018-emr3500.dtb \
+ qcom-ipq4018-ens620ext.dtb \
+@@ -919,8 +917,6 @@
+ qcom-ipq4018-ex6150v2.dtb \
+ qcom-ipq4018-fritzbox-4040.dtb \
+ qcom-ipq4018-gl-ap1300.dtb \
+- qcom-ipq4018-jalapeno.dtb \
+- qcom-ipq4018-meshpoint-one.dtb \
+ qcom-ipq4018-cap-ac.dtb \
+ qcom-ipq4018-hap-ac2.dtb \
+ qcom-ipq4018-sxtsq-5-ac.dtb \
+@@ -931,7 +927,6 @@
+ qcom-ipq4018-rutx10.dtb \
+ qcom-ipq4018-wac510.dtb \
+ qcom-ipq4018-wre6606.dtb \
+- qcom-ipq4018-wrtq-329acn.dtb \
+ qcom-ipq4019-ap.dk01.1-c1.dtb \
+ qcom-ipq4019-ap.dk04.1-c1.dtb \
+ qcom-ipq4019-ap.dk04.1-c3.dtb \
+@@ -950,8 +945,6 @@
+ qcom-ipq4019-hap-ac3.dtb \
+ qcom-ipq4019-map-ac2200.dtb \
+ qcom-ipq4019-lhgg-60ad.dtb \
+- qcom-ipq4019-mf286d.dtb \
+- qcom-ipq4019-mf289f.dtb \
+ qcom-ipq4019-mr8300.dtb \
+ qcom-ipq4019-pa2200.dtb \
+ qcom-ipq4019-r619ac-64m.dtb \
+@@ -964,14 +957,9 @@
+ qcom-ipq4019-srs60.dtb \
+ qcom-ipq4019-x1pro.dtb \
+ qcom-ipq4019-u4019-32m.dtb \
+- qcom-ipq4019-wpj419.dtb \
+ qcom-ipq4019-wtr-m2133hp.dtb \
+- qcom-ipq4028-wpj428.dtb \
+- qcom-ipq4029-ap-303.dtb \
+ qcom-ipq4029-ap-303h.dtb \
+- qcom-ipq4029-ap-365.dtb \
+ qcom-ipq4029-gl-b1300.dtb \
+- qcom-ipq4019-gl-b2200.dtb \
+ qcom-ipq4029-gl-s1300.dtb \
+ qcom-ipq4029-mr33.dtb \
+ qcom-ipq8064-ap148.dtb \