mirror of https://github.com/aredn/aredn.git
859279aaae
The NanoStation M2 and M5 XW switch configuraiton had LAN on primary port (untagged) and DtDLink and WAN (vlan 1 and 2) on secondary port. This change enables untagged, vlan 1, and vlan 2 on primary port to function. This configuration also functions on the secondary port. However, devices on the same network can not communicate with one another across the two ports. Although, access works from the greater mesh and the node to devices on both ports on the same network. When using one port the behavior is now consitent with all other AREDN devices. The use of both ports offers some benefit, but with the above limitations. |
||
|---|---|---|
| .. | ||
| 001-add_support_for_TP-Link_CPE210_v3.patch | ||
| 001-add_support_for_TP-Link_CPE510_v2.patch | ||
| 002-firmware-check-fix.patch | ||
| 003-add-winbond-w25q128jv.patch | ||
| 700-cpe-diags.patch | ||
| 701-extended-spectrum.patch | ||
| 702-enable-country-hx.patch | ||
| 703-fix-dnsmasq.patch | ||
| 704-enable-telnet.patch | ||
| 705-aredn-banner.patch | ||
| 706-MeshNode-SSID.patch | ||
| 707-enable-board-name.patch | ||
| 708-define-aredn-networks.patch | ||
| 709-iperf-fw-restart.patch | ||
| 710-no-ping6-traceroute6.patch | ||
| PATCHES.rst | ||
| series | ||