mirror of https://github.com/aredn/aredn.git
5eedf421da
This adds support for a popular low-cost 5GHz N based AP Specifications: - SoC: Atheros AR9344 - RAM: 64MB - Storage: 8 MB SPI NOR - Wireless: 5GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power - Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Signed-off-by: Andrew Cameron <apcameron@softhome.net> |
||
|---|---|---|
| .. | ||
| 001-add_support_for_GL-iNet_GL-AR150.patch | ||
| 001-add_support_for_TP-Link_CPE210_v3.patch | ||
| 001-add_support_for_TP-Link_CPE220_v2.patch | ||
| 001-add_support_for_TP-Link_CPE220_v3.patch | ||
| 001-add_support_for_TP-Link_CPE510_v2.patch | ||
| 001-add_support_for_TP-Link_CPE510_v3.patch | ||
| 001-add_support_for_TP-Link_CPE610_v1.patch | ||
| 001-add_support_for_TP-Link_WBS510_v2.patch | ||
| 002-firmware-check-fix.patch | ||
| 003-add-winbond-w25q128jv.patch | ||
| 004-add-ldf-5nd.patch | ||
| 004-add-lhg-5hpnd-xl.patch | ||
| 005-add-haplite-new-model.patch | ||
| 006-add-lhg-5hpnd.patch | ||
| 007-fix-sysupgrade-fail.patch | ||
| 008-add-lhg.patch | ||
| 009-add-sxtsq.patch | ||
| 700-cpe-diags.patch | ||
| 701-extended-spectrum.patch | ||
| 702-enable-country-hx.patch | ||
| 703-fix-dnsmasq.patch | ||
| 704-enable-telnet.patch | ||
| 705-aredn-banner.patch | ||
| 706-MeshNode-SSID.patch | ||
| 707-enable-board-name.patch | ||
| 708-define-aredn-networks.patch | ||
| 709-iperf-fw-restart.patch | ||
| 710-no-ping6-traceroute6.patch | ||
| 711-nano-xw-switch-config.patch | ||
| 712-auto-distance-settings.patch | ||
| 713-delay-snmpd-startup.patch | ||
| PATCHES.rst | ||
| series | ||