Mirrors
/
aredn
mirror of https://github.com/aredn/aredn.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
aredn/patches/0001-ath79-add-support-for-...

190 lines
6.0 KiB
Diff
Raw Blame History

From d51e261e893451f9d0958a5ac39989d10b275e86 Mon Sep 17 00:00:00 2001
From: Andrew Cameron <apcameron@softhome.net>
Date: Sun, 6 Nov 2022 14:43:37 +0000
Subject: [PATCH 1/1] ath79: add support for TP-Link CPE605-v1 TP-Link
CPE605-v1 is an outdoor wireless CPE for 5 GHz with one Ethernet port based
on Atheros AR9344
Specifications:
- 560/450/225 MHz (CPU/DDR/AHB)
- 1x 10/100 Mbps Ethernet
- 64 MB of DDR2 RAM
- 8 MB of SPI-NOR Flash
- 23dBi high-gain directional antenna and a dedicated metal reflector
- Power, LAN, WLAN5G green LEDs
- 3x green RSSI LEDs
Flashing instructions:
Flash factory image through stock firmware WEB UI or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
Signed-off-by: Andrew Cameron <apcameron@softhome.net>
---
.../ath79/dts/ar9344_tplink_cpe605-v1.dts | 33 +++++++++++++++++++
.../generic/base-files/etc/board.d/01_leds | 1 +
.../generic/base-files/etc/board.d/02_network | 1 +
target/linux/ath79/image/generic-tp-link.mk | 10 ++++++
4 files changed, 45 insertions(+)
create mode 100644 target/linux/ath79/dts/ar9344_tplink_cpe605-v1.dts
diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe605-v1.dts b/target/linux/ath79/dts/ar9344_tplink_cpe605-v1.dts
new file mode 100644
index 0000000000..0c6eee7ba6
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_cpe605-v1.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344_tplink_cpe.dtsi"
+
+/ {
+ model = "TP-Link CPE605 v1";
+ compatible = "tplink,cpe605-v1", "qca,ar9344";
+
+ aliases {
+ led-boot = &led_lan;
+ led-failsafe = &led_lan;
+ led-upgrade = &led_lan;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_lan: lan {
+ label = "green:lan";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g {
+ label = "green:wlan5g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&eth1 {
+ compatible = "syscon", "simple-mfd";
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 606a194f7e..54d764f907 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -18,6 +18,7 @@ glinet,6416|\
glinet,gl-ar300m-lite|\
glinet,gl-ar300m16|\
pcs,cap324|\
+tplink,cpe605-v1|\
tplink,cpe610-v1|\
tplink,cpe610-v2|\
tplink,tl-wa1201-v2)
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index e47f66c2f2..2fa0487981 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -76,6 +76,7 @@ ath79_setup_interfaces()
tplink,cpe210-v3|\
tplink,cpe510-v2|\
tplink,cpe510-v3|\
+ tplink,cpe605-v1|\
tplink,cpe610-v1|\
tplink,cpe610-v2|\
tplink,cpe710-v1|\
diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
index 598085e50b..314ece1e03 100644
--- a/target/linux/ath79/image/generic-tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -350,6 +350,16 @@ define Device/tplink_cpe510-v3
endef
TARGET_DEVICES += tplink_cpe510-v3
+define Device/tplink_cpe605-v1
+ $(Device/tplink-safeloader-okli)
+ SOC := ar9344
+ IMAGE_SIZE := 7680k
+ DEVICE_MODEL := CPE605
+ DEVICE_VARIANT := v1
+ TPLINK_BOARD_ID := CPE605V1
+endef
+TARGET_DEVICES += tplink_cpe605-v1
+
define Device/tplink_cpe610-v1
$(Device/tplink-safeloader-okli)
SOC := ar9344
--
2.30.2
Index: openwrt/tools/firmware-utils/patches/0001-tplink-safeloader-add-TP-Link-CPE605-v1-Support.patch
===================================================================
--- /dev/null
+++ openwrt/tools/firmware-utils/patches/0001-tplink-safeloader-add-TP-Link-CPE605-v1-Support.patch
@@ -0,0 +1,64 @@
+From 2b43d1376a6945d07b2a87e48e3645eaa4f24d5a Mon Sep 17 00:00:00 2001
+From: Andrew Cameron <apcameron@softhome.net>
+Date: Wed, 9 Nov 2022 13:07:11 +0000
+Subject: [PATCH 1/1] tplink-safeloader: add TP-Link CPE605 v1 Support
+
+Enable creating images compatible with the TP-Link CPE605 v1 Router
+
+Signed-off-by: Andrew Cameron <apcameron@softhome.net>
+---
+ src/tplink-safeloader.c | 38 ++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 38 insertions(+)
+
+diff --git a/src/tplink-safeloader.c b/src/tplink-safeloader.c
+index 7f9081d..b920191 100644
+--- a/src/tplink-safeloader.c
++++ b/src/tplink-safeloader.c
+@@ -468,6 +468,44 @@ static struct device_info boards[] = {
+ .last_sysupgrade_partition = "support-list",
+ },
+
++ /** Firmware layout for the CPE605V1 */
++ {
++ .id = "CPE605V1",
++ .vendor = "CPE605(TP-LINK|UN|N150-5):1.0\r\n",
++ .support_list =
++ "SupportList:\r\n"
++ "CPE605(TP-LINK|UN|N150-5|00000000):1.0\r\n"
++ "CPE605(TP-LINK|EU|N150-5|45550000):1.0\r\n"
++ "CPE605(TP-LINK|US|N150-5|55530000):1.0\r\n"
++ "CPE605(TP-LINK|UN|N150-5):1.0\r\n"
++ "CPE605(TP-LINK|EU|N150-5):1.0\r\n"
++ "CPE605(TP-LINK|US|N150-5):1.0\r\n",
++ .part_trail = 0xff,
++ .soft_ver = SOFT_VER_DEFAULT,
++
++ .partitions = {
++ {"fs-uboot", 0x00000, 0x20000},
++ {"partition-table", 0x20000, 0x02000},
++ {"default-mac", 0x30000, 0x00020},
++ {"serial-number", 0x30100, 0x00020},
++ {"product-info", 0x31100, 0x00100},
++ {"device-info", 0x31400, 0x00400},
++ {"signature", 0x32000, 0x00400},
++ {"device-id", 0x33000, 0x00100},
++ {"firmware", 0x40000, 0x770000},
++ {"soft-version", 0x7b0000, 0x00100},
++ {"support-list", 0x7b1000, 0x01000},
++ {"user-config", 0x7c0000, 0x10000},
++ {"default-config", 0x7d0000, 0x10000},
++ {"log", 0x7e0000, 0x10000},
++ {"radio", 0x7f0000, 0x10000},
++ {NULL, 0, 0}
++ },
++
++ .first_sysupgrade_partition = "os-image",
++ .last_sysupgrade_partition = "support-list",
++ },
++
+ /** Firmware layout for the CPE610V1 */
+ {
+ .id = "CPE610V1",
+--
+2.30.2
+
Reference in New Issue View Git Blame Copy Permalink