aredn/files/www/cgi-bin/tunfunc.pm

295 lines
9.0 KiB
Perl

=for comment
Part of AREDN -- Used for creating Amateur Radio Emergency Data Networks
Copyright (c) 2015 Darryl Quinn
See Contributors file for additional contributors
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation version 3 of the License.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
Additional Terms:
Additional use restrictions exist on the AREDN(TM) trademark and logo.
See AREDNLicense.txt for more info.
Attributions to the AREDN Project must be retained in the source code.
If importing this code into a new or existing project attribution
to the AREDN project must be added to the source code.
You must not misrepresent the origin of the material conained within.
Modified versions must be modified to attribute to the original source
and be marked in reasonable ways as differentiate it from the original
version.
=cut
#################################
# get base network from config
#################################
sub get_server_network_address()
{
my @list;
my $uciresult;
my ($rc,$server_net)=&uci_get_indexed_option("vtun","network","0","start");
if($rc eq 0 and $server_net ne "")
{
# to facilitate overrides (ie. moving the server to a new node)
# read the file into $mac
@list = split('\.', $server_net);
}
else
{
# or, calc based on eth0 mac address, then store it.
$mac=get_mac("eth0");
@MACS=split(/:/, $mac);
push @list, "172";
push @list, "31";
push @list, hex @MACS[5];
# strip off the high bits
push @list, ((hex @MACS[4]) << 2) & 255;
$server_net=sprintf("%d.%d.%d.%d",@list[0],@list[1],@list[2],@list[3]);
#($rc,$uciresult)=&uci_add_sectiontype("vtun","network");
($rc,$uciresult)=&uci_set_indexed_option("vtun","network","0","start",$server_net);
$rc=&uci_commit("vtun");
}
return @list;
}
sub get_active_tun()
{
my @active_tun;
foreach(`ps -w|grep vtun|grep ' tun '`)
{
@parts = $_ =~ /.*\:.*-(172-31-.*)\stun\stun.*/g;1;
@parts[0] =~ s/\-/\./g;
push(@active_tun,@parts[0]);
}
return @active_tun;
}
# INPUT arg: Array of active tunnel IP's, IP of the tunnel network you are checking
sub is_tunnel_active()
{
my ($n, @active_tun) = @_;
my $match=0;
foreach(@active_tun){
#print "a=$_, n=$n\n";
if($n eq $_) {
$match = 1;
last;
}
}
return $match; # the return value of the do block
}
##########################
# Add OLSRD interfaces - called when adding a new client connection
##########################
sub add_olsrd_interface() {
my ($tunnum) = @_;
# uci add_list olsrd.interface=vpn${tunnumber}
# uci commit vtundsrv
#config Interface
# list interface 'vpn50 vpn51 vpn52 vpn53 vpn54 vpn55 vpn56 vpn57 vpn58 vpn59'
# option Ip4Broadcast 255.255.255.255
}
##########################
# Delete OLSRD interfaces - called when deleting a new client connection
##########################
sub del_olsrd_interface() {
my ($tunnum) = @_;
# uci delete_list olsrd.interface.vpn${tunnumber}
# uci commit vtundsrv
#config Interface
# list interface 'vpn50 vpn51 vpn52 vpn53 vpn54 vpn55 vpn56 vpn57 vpn58 vpn59'
# option Ip4Broadcast 255.255.255.255
}
##########################
# Add network interfaces tun50 thru tun69 - called on install
##########################
sub add_network_interfaces() {
for ($tunnum = 50; $tunnum <= 69; $tunnum++)
{
system "uci set network.vpn${tunnum}=interface";
system "uci set network.vpn${tunnum}.ifname='tun${tunnum}";
system "uci set network.vpn${tunnum}.proto='none'";
}
system "uci commit network";
}
##########################
# Delete OLSRD interfaces - called when deleting a new client connection
##########################
sub del_olsrd_interface() {
my ($tunnum) = @_;
# uci delete_list olsrd.interface.vpn${tunnumber}
# uci commit vtundsrv
#
}
#################################
# Check Freespace on / filesystem
#################################
sub check_freespace()
{
my $fs = `df / | grep -v '^Filesystem' | awk 'NF=6{print \$4}NF==5{print \$3}{}'`;
chomp $fs;
return $fs;
}
##########################
# Config firewall to allow port 5525 on WAN interface
##########################
sub open_5525_on_wan() {
system "uci add firewall rule >/dev/null 2>&1";
system "uci set firewall.\@rule[-1].src='wan' >/dev/null 2>&1";
system "uci set firewall.\@rule[-1].dest_port='5525' >/dev/null 2>&1";
system "uci set firewall.\@rule[-1].proto='tcp' >/dev/null 2>&1";
system "uci set firewall.\@rule[-1].target='ACCEPT' >/dev/null 2>&1";
system "uci commit firewall >/dev/null 2>&1";
}
sub vpn_setup_required()
{
my ($navpage) = @_;
http_header();
html_header("$node setup", 1);
print "<body><center><table width=790>";
print "<tr><td>\n";
navbar($navpage);
print "</td></tr>";
#################
# messages
#################
if(@cli_err)
{
print "<tr><td align=center><b>ERROR:<br>";
foreach(@cli_err) { print "$_<br>" }
print "</b></td></tr>\n";
}
print "<tr><td align=center><br><b>";
print "Tunnel software needs to be installed.<br/>";
print "<form method='post' action='/cgi-bin/vpn' enctype='multipart/form-data'>\n";
print "<input type=submit name=button_install value='Click to install' class='btn_tun_install' />";
print "</form>";
print "</b></td></tr>\n";
print "</table></center></body></html>\n";
exit;
}
#################################
# Install VTUN Components/config
#################################
sub install_vtun
{
# check free disk space - get real values
$freespace=&check_freespace();
if($freespace < 600)
{
push @cli_err, "Insuffient free disk space!";
# redirect back to admin page
} else {
# Update/Install VTUN
system "opkg update >/dev/null 2>&1";
if ($? eq 0)
{
system "opkg install kmod-tun zlib libopenssl liblzo vtun >/dev/null 2>&1";
if ($? eq 0)
{
# add network interfaces
add_network_interfaces();
# allow port 5525 for server connections
open_5525_on_wan();
# enable init.d scripts
system("chmod +x /etc/init.d/vtundsrv");
system("chmod +x /etc/init.d/vtund");
# create UCI config file
system("touch /etc/config/vtun");
# create options section
$rc=&uci_add_sectiontype("vtun","options");
$rc=&uci_commit();
http_header();
html_header("TUNNEL INSTALLATION IN PROGRESS", 0);
print "</head>\n";
print "<body><center>\n";
print "<h2>Installing tunnel software...</h2>\n";
print "<h1>DO NOT REMOVE POWER UNTIL THE INSTALLATION IS FINISHED</h1>\n";
print "</center><br>\n";
unless($debug)
{
print "
<center><h2>The node is rebooting</h2>
<h3>Wait for the Status 4 LED to start blinking, then stop blinking.<br>
When the Status 4 LED is solid on you can reconnect with<br>
<a href='http://$node.local.mesh:8080/'>http://$node.local.mesh:8080/</a><br>
</h3>
</center>
";
page_footer();
print "</body></html>";
system "/sbin/reboot" unless $debug;
exit;
}
} else {
push @cli_err,"Package installation failed!";
}
} else {
push @cli_err,"Package update failed!";
}
}
}
sub generate_ips()
{
my ($netip) = @_;
my $serverip = &addrtoint($netip);
$serverip++;
$serverip++;
$serverip=inttoaddr($serverip);
my $clientip = &addrtoint($netip);
$clientip++;
$clientip=inttoaddr($clientip);
return ($clientip, $serverip);
}
sub addrtoint { return( unpack( "N", pack( "C4", split( /[.]/,$_[0]))))};
sub inttoaddr { return( join( ".", unpack( "C4", pack( "N", $_[0]))))};
sub DEBUGEXIT()
{
my ($text) = @_;
http_header();
html_header("$node setup", 1);
print "DEBUG-";
print $text;
print "</body>";
exit;
}
#weird uhttpd/busybox error requires a 1 at the end of this file
1