Mirrors
/
fluxion
mirror of https://github.com/FluxionNetwork/fluxion.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
fluxion/tests/airmon

1330 lines
34 KiB
Plaintext
Raw Normal View History

Add files via upload
2016-09-18 11:18:07 -06:00
#!/bin/sh
USERID=""
IFACE=""
KISMET=/etc/kismet/kismet.conf
CH=$3; [ x$3 = "x" ] && CH=10
IFACE_FOUND="false"
MADWIFI=0
MAC80211=0
USE_IW=0
IW_SOURCE="https://www.kernel.org/pub/software/network/iw/iw-3.17.tar.xz"
IW_ERROR=""
UDEV_ISSUE=0
if [ -f "`which iw 2>&1`" ]
then
USE_IW=1
fi
if [ "x$MON_PREFIX" = "x" ]
then
MON_PREFIX="mon"
fi
PROCESSES="wpa_action\|wpa_supplicant\|wpa_cli\|dhclient\|ifplugd\|dhcdbd\|dhcpcd\|NetworkManager\|knetworkmanager\|avahi-autoipd\|avahi-daemon\|wlassistant\|wifibox"
PS_ERROR="invalid"
usage() {
printf "usage: `basename $0` <start|stop|check> <interface> [channel or frequency]\n"
echo
exit
}
startStdIface() {
iwconfig $1 mode monitor >/dev/null 2>&1
if [ ! -z $2 ]
then
if [ $2 -lt 1000 ]
then
iwconfig $1 channel $2 >/dev/null 2>&1
else
iwconfig $1 freq "$2"000000 > /dev/null 2>&1
fi
fi
iwconfig $1 key off >/dev/null 2>&1
ifconfig $1 up
printf " (monitor mode enabled)"
}
stopStdIface() {
ifconfig $1 down >/dev/null 2>&1
iwconfig $1 mode Managed >/dev/null 2>&1
ifconfig $1 down >/dev/null 2>&1
printf " (monitor mode disabled)"
}
getModule() {
if [ -f "/sys/class/net/$1/device/driver/module/srcversion" ]
then
srcver1=`cat "/sys/class/net/$1/device/driver/module/srcversion"`
for j in `lsmod | awk '{print $1}' | grep -v "^Module$"`
do
srcver2="`modinfo $j 2>/dev/null | grep srcversion | awk '{print $2}'`"
if [ $srcver1 = "$srcver2" ]
then
MODULE=$j
break
fi
done
else
MODULE=""
fi
# return 0
}
getDriver() {
if [ -e "/sys/class/net/$1/device/driver" ]
then
DRIVER="`ls -l "/sys/class/net/$1/device/driver" | sed 's/^.*\/\([a-zA-Z0-9_-]*\)$/\1/'`"
BUS="`ls -l "/sys/class/net/$1/device/driver" | sed 's/^.*\/\([a-zA-Z0-9_-]*\)\/.*\/.*$/\1/'`"
else
DRIVER=""
BUS=""
fi
if [ x$(echo $DRIVER | grep ath5k) != "x" ]
then
DRIVER="ath5k"
fi
if [ x$(echo $DRIVER | grep ath9k) != "x" ]
then
DRIVER="ath9k"
fi
if [ x$DRIVER = "x" ]
then
if [ -d /sys/class/net/tiwlan0/wireless ]
then
DRIVER=WiLink
fi
fi
}
scanProcesses() {
if [ -f "`which service 2>&1`" ] && [ x"$1" = "xkill" ]
then
service network-manager stop 2>/dev/null >/dev/null
service avahi-daemon stop 2>/dev/null >/dev/null
fi
match=`ps -A -o comm= | grep $PROCESSES | grep -v grep | wc -l`
if [ $match -gt 0 -a x"$1" != "xkill" ]
then
printf "\n\n"
echo "Found $match processes that could cause trouble."
echo "If airodump-ng, aireplay-ng or airtun-ng stops working after"
echo "a short period of time, you may want to kill (some of) them!"
echo -e "\nPID\tName"
else
if [ x"$1" != "xkill" ]
then
return
fi
fi
if [ $match -gt 0 -a x"$1" = "xkill" ]
then
echo "Killing all those processes..."
fi
i=1
while [ $i -le $match ]
do
pid=`ps -A -o pid= -o comm= | grep $PROCESSES | grep -v grep | head -n $i | tail -n 1 | awk '{print $1}'`
pname=`ps -A -o pid= -o comm= | grep $PROCESSES | grep -v grep | head -n $i | tail -n 1 | awk '{print $2}'`
if [ x"$1" != "xkill" ]
then
printf "$pid\t$pname\n"
else
kill $pid
fi
i=$(($i+1))
done
}
checkProcessesIface() {
if [ x"$1" = "x" ]
then
return
fi
match2=`ps -o comm= -p 1 2>&1 | grep $PS_ERROR | grep -v grep | wc -l`
if [ $match2 -gt 0 ]
then
return
fi
for i in `ps auxw | grep $1 | grep -v "grep" | grep -v "airmon" | awk '{print $2}'`
do
pname=`ps -o comm= -p $i`
echo "Process with PID $i ($pname) is running on interface $1"
done
}
getStack() {
if [ x"$1" = "x" ]
then
return
fi
if [ -d /sys/class/net/$1/phy80211/ ]
then
MAC80211=1
else
MAC80211=0
fi
}
#you need to run getDriver $iface prior to getChipset
getChipset() {
if [ x"$1" = "x" ]
then
return
fi
CHIPSET="Unknown "
if [ x$DRIVER = "xOtus" -o x$DRIVER = "xarusb_lnx" ]
then
CHIPSET="AR9001U"
fi
if [ x$DRIVER = "xWiLink" ]
then
CHIPSET=`dmesg | grep TIWLAN | grep CHIP | tail -n 1 | awk -F\ '{ print $6 }'`
if [ x$CHIPSET = "x" ]
then
CHIPSET="Unknown"
else
CHIPSET="TI${CHIPSET}"
fi
fi
if [ x$DRIVER = "xar9170usb" ]
then
getPhy $2
CHIPSET="Atheros `dmesg | grep $PHYDEV | grep "is registered as" | cut -d':' -f 2 | cut -d' ' -f 3`"
fi
if [ x$DRIVER = "xzd1211rw_mac80211" ]
then
CHIPSET="ZyDAS 1211"
fi
if [ x$DRIVER = "xzd1211rw" ]
then
getPhy $2
TEMP_USBPORT="`dmesg | grep $PHYDEV | grep zd1211rw | cut -d'w' -f 2 | cut -d' ' -f 2`"
TEMP_CHIPSET="`dmesg | grep "$TEMP_USBPORT" | grep chip | tail -n 1 | cut -d':' -f 3 | cut -d' ' -f 2`"
CHIPSET="Zydas $TEMP_CHIPSET"
fi
if [ x$DRIVER = "xacx" -o x$DRIVER = "xacx-mac80211" -o x$DRIVER = "xacx1xx" ]
then
CHIPSET="TI ACX1xx"
fi
if [ x$DRIVER = "adm8211" ]
then
CHIPSET="ADMtek 8211"
fi
if [ x$DRIVER = "xat76_usb" ]
then
CHIPSET="Atmel "
fi
if [ x$DRIVER = "xb43" -o x$DRIVER = "xb43legacy" -o x$DRIVER = "xbcm43xx" -o x$DRIVER = "xwl" ]
then
CHIPSET="Broadcom"
if [ x$DRIVER = "xb43" ]
then
getPhy $2
TEMP_CHIPSET="`dmesg | grep $PHYDEV | grep found | cut -d':' -f 2 | cut -d' ' -f 3`"
if [ x$TEMP_CHIPSET = "x4318" ]
then
CHIPSET="$CHIPSET $TEMP_CHIPSET"
fi
fi
fi
if [ x$DRIVER = "xprism54" -o x$DRIVER = "xp54pci" -o x$DRIVER = "xp54usb" ]
then
CHIPSET="PrismGT "
fi
if [ x$DRIVER = "xhostap" ]
then
CHIPSET="Prism 2/2.5/3"
fi
if [ x$DRIVER = "xr8180" -o x$DRIVER = "xrtl8180" ]
then
CHIPSET="RTL8180/RTL8185"
fi
# r8187 is reporting itself as rtl8187
if [ x$DRIVER = "xrtl8187" ]
then
getPhy $2
if [ x"$PHYDEV" = "x" ]
then
CHIPSET="RTL8187 "
else
CHIPSET="`dmesg | grep $PHYDEV | grep hwaddr | cut -d',' -f 2 | cut -d' ' -f 2`"
if [ x$CHIPSET = "xRTL8187vB" ]
then
CHIPSET="Realtek RTL8187L"
else
CHIPSET="Realtek $CHIPSET"
fi
fi
fi
if [ x$DRIVER = "xr8187" ]
then
CHIPSET="RTL8187 "
fi
if [ x$DRIVER = "xrt2570" -o x$DRIVER = "xrt2500usb" ]
then
CHIPSET="Ralink 2570 USB"
fi
if [ x$DRIVER = "xrt2400" -o x$DRIVER = "xrt2400pci" ]
then
CHIPSET="Ralink 2400 PCI"
fi
if [ x$DRIVER = "xrt2500" -o x$DRIVER = "xrt2500pci" ]
then
CHIPSET="Ralink 2560 PCI"
fi
if [ x$DRIVER = "xrt61" -o x$DRIVER = "xrt61pci" ]
then
CHIPSET="Ralink 2561 PCI"
fi
if [ x$DRIVER = "xrt73" -o x$DRIVER = "xrt73usb" ]
then
CHIPSET="Ralink 2573 USB"
fi
#if [ x$DRIVER = "xrt2800usb" ]
#then
# getPhy $2
# CHIPSET="Ralink `dmesg | grep rt2800usb | grep firmware | cut -d':' -f 4 | cut -d' ' -f 3 | cut -d'.' -f 1`"
#fi
if [ x$DRIVER = "xrt2800" -o x$DRIVER = "xrt2800usb" -o x$DRIVER = "xrt3070sta" ]
then
CHIPSET="Ralink RT2870/3070"
fi
if [ x$DRIVER = "xipw2100" ]
then
CHIPSET="Intel 2100B"
fi
if [ x$DRIVER = "xipw2200" ]
then
CHIPSET="Intel 2200BG/2915ABG"
fi
if [ x$DRIVER = "xipw3945" -o x$DRIVER = "xipwraw" -o x$DRIVER = "xiwl3945" ]
then
CHIPSET="Intel 3945ABG"
fi
if [ x$DRIVER = "xipw4965" -o x$DRIVER = "xiwl4965" ]
then
CHIPSET="Intel 4965AGN"
fi
if [ x$DRIVER = "xiwlagn" -o x$DRIVER = "xiwlwifi" ]
then
CHIPSET="Intel 4965/5xxx/6xxx/1xxx"
DETECTED_STR="`dmesg | grep $DRIVER | grep Detected | tail -n 1 `"
LINK_POS="3"
FOUND="0"
if [ x"$DETECTED_STR" != "x" ]
then
INTEL_WORD="Link"
if [ "`echo "$DETECTED_STR" | grep $INTEL_WORD | wc -l`" = "0" ]
then
INTEL_WORD="Wireless"
if [ "`echo "$DETECTED_STR" | grep $INTEL_WORD | wc -l`" = "0" ]
then
INTEL_WORD="Ultimate"
if [ "`echo "$DETECTED_STR" | grep $INTEL_WORD | wc -l`" = "0" ]
then
INTEL_WORD="Advanced"
fi
fi
fi
while [ $FOUND = "0" ]
do
FOUND=`echo "$DETECTED_STR" | cut -d' ' -f $LINK_POS | grep $INTEL_WORD | wc -l`
LINK_POS=$(($LINK_POS+1))
done
TEMP_CHIPSET=`echo "$DETECTED_STR" | cut -d' ' -f $LINK_POS`
case "x${TEMP_CHIPSET}" in
# x5100AGN)
# CHIPSET="Intel $TEMP_CHIPSET"
# ;;
x5300)
TYPE_TEMP=`echo "$DETECTED_STR" | cut -d' ' -f $(($LINK_POS+1)) | awk -F, '{ print $1 }' `
CHIPSET="Intel ${TEMP_CHIPSET}${TYPE_TEMP}"
;;
x1000)
TYPE_TEMP=`echo "$DETECTED_STR" | cut -d' ' -f $[$LINK_POS+2]`
CHIPSET="Intel ${TEMP_CHIPSET}${TYPE_TEMP}"
;;
*)
CHIPSET="Intel $TEMP_CHIPSET"
;;
esac
fi
fi
if [ x$DRIVER = "xath5k" ]
then
getPhy $2
CHIPSET="Atheros `dmesg | grep $PHYDEV | grep "chip found" | cut -d':' -f 2 | cut -d' ' -f 3`"
fi
if [ x$DRIVER = "xath_pci" ]
then
CHIPSET="Atheros "
fi
if [ x$DRIVER = "xath9k" ]
then
getPhy $2
CHIPSET="Atheros `dmesg | grep $PHYDEV | grep Atheros | tail -n 1 | cut -d':' -f 2 | cut -d' ' -f 3`"
fi
if [ x$DRIVER = "xorinoco" ]
then
CHIPSET="Hermes/Prism"
fi
if [ x$DRIVER = "xath9k_htc" -o x$DRIVER = "xusb" ]
then
CHIPSET="AR9001/9002/9271"
fi
if [ x$DRIVER = "xwl12xx" ]
then
CHIPSET="TI WL1251/WL1271"
IS_WL1251="`dmesg| grep firmware | grep wl1251 | wc -l`"
IS_WL1271="`dmesg| grep firmware | grep wl1271 | wc -l`"
if [ $IS_WL1251 != "0" ] && [ $IS_WL1271 = "0" ]
then
CHIPSET="TI WL1251"
fi
if [ $IS_WL1271 != "0" ] && [ $IS_WL1251 = "0" ]
then
CHIPSET="TI WL1271"
fi
# In any other case, we can't determine the chipset and thus give the generic: 1251/1271
fi
if [ x$DRIVER = "xr871x_usb_drv" ]
then
CHIPSET="Realtek 81XX"
fi
if [ x$DRIVER = "xcarl9170" ]
then
getPhy $2
CHIPSET=`dmesg | grep usb | grep $PHYDEV | awk -F\ '{ print $3 " " $4 }'`
if [ `echo $CHIPSET | grep -i atheros | wc -l` -eq 0 ]
then
CHIPSET=`dmesg | grep usb | grep $PHYDEV | awk -F\ '{ print $5 " " $6 }'`
fi
fi
}
getPhy() {
PHYDEV=""
if [ x"$1" = "x" ]
then
return
fi
if [ x$MAC80211 = "x" ]
then
return
fi
if [ -d /sys/class/net/$1/phy80211/ ]
then
PHYDEV="`ls -l "/sys/class/net/$1/phy80211" | sed 's/^.*\/\([a-zA-Z0-9_-]*\)$/\1/'`"
fi
}
getNewMon() {
i=0
while [ -d /sys/class/net/$MON_PREFIX$i/ ]
do
i=$(($i+1))
done
MONDEV="$MON_PREFIX$i"
}
if [ x"`which id 2> /dev/null`" != "x" ]
then
USERID="`id -u 2> /dev/null`"
fi
if [ x$USERID = "x" -a x$UID != "x" ]
then
USERID=$UID
fi
if [ x$USERID != "x" -a x$USERID != "x0" ]
then
echo Run it as root ; exit ;
fi
iwpriv > /dev/null 2> /dev/null ||
{ echo Wireless tools not found ; exit ; }
if [ x"$1" = "xcheck" ] || [ x"$1" = "xstart" ]
then
scanProcesses
for iface in `iwconfig 2>/dev/null | egrep '(IEEE|ESSID|802\.11|WLAN)' | sed 's/^\([a-zA-Z0-9_.]*\) .*/\1/' | grep -v wifi`
do
# getModule $iface
# getDriver $iface
checkProcessesIface $iface
done
if [ x"$2" = "xkill" ]
then
scanProcesses "$2"
fi
if [ x"$1" = "xcheck" ]
then
exit
fi
fi
printf "\n\n"
if [ $# -ne "0" ]
then
if [ x$1 != "xstart" ] && [ x$1 != "xstop" ]
then
usage
fi
if [ x$2 = "x" ]
then
usage
fi
fi
SYSFS=0
if [ -d /sys/ ]
then
SYSFS=1
fi
printf "Interface\tChipset\t\tDriver\n\n"
for iface in `ifconfig -a 2>/dev/null | egrep UNSPEC | sed 's/^\([a-zA-Z0-9_]*\) .*/\1/'`
do
if [ x"`iwpriv $iface 2>/dev/null | grep ipwraw-ng`" != "x" ]
then
printf "$iface\t\tIntel 3945ABG\tipwraw-ng"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
cp $KISMET~ $KISMET 2>/dev/null &&
echo "source=ipw3945,$iface,Centrino_abg" >>$KISMET
startStdIface $iface $CH
iwconfig $iface rate 1M 2> /dev/null >/dev/null
iwconfig $iface txpower 16 2> /dev/null >/dev/null
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
iwconfig $iface txpower 15 2> /dev/null >/dev/null
iwconfig $iface rate 54M 2> /dev/null >/dev/null
fi
echo
continue
fi
if [ -e "/proc/sys/dev/$iface/fftxqmin" ]
then
MADWIFI=1
ifconfig $iface up
printf "$iface\t\tAtheros\t\tmadwifi-ng"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
IFACE=`wlanconfig ath create wlandev $iface wlanmode monitor -bssid | grep ath`
cp $KISMET~ $KISMET 2>/dev/null &&
echo "source=madwifi_g,$iface,Atheros" >>$KISMET
ifconfig $iface up 2>/dev/null >/dev/null
if [ $CH -lt 1000 ]
then
iwconfig $IFACE channel $CH 2>/dev/null >/dev/null
else
iwconfig $IFACE freq "$CH"000000 2>/dev/null >/dev/null
fi
ifconfig $IFACE up 2>/dev/null >/dev/null
UDEV_ISSUE=$?
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
echo "$iface does not support 'stop', do it on ath interface"
fi
echo
continue
fi
done
if [ $MADWIFI -eq 1 ]
then
sleep 1s
fi
for iface in `iwconfig 2>/dev/null | egrep '(IEEE|ESSID|802\.11|WLAN)' | sed 's/^\([a-zA-Z0-9_.]*\) .*/\1/' | grep -v wifi`
do
getModule $iface
getDriver $iface
getStack $iface
getChipset $DRIVER $iface
if [ x$MAC80211 = "x1" ]
then
getPhy $iface
getNewMon
printf "$iface\t\t$CHIPSET\t$DRIVER - [$PHYDEV]"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
if [ $USE_IW = 1 ]
then
IW_ERROR=`iw dev $iface interface add $MONDEV type monitor 2>&1 | grep "nl80211 not found"`
if [ x$IW_ERROR = "x" ]
then
sleep 1s
if [ ! -z $3 ]
then
if [ $3 -lt 1000 ]
then
iwconfig $MONDEV channel $3 >/dev/null 2>&1
else
iwconfig $MONDEV freq "$3"000000 >/dev/null 2>&1
fi
fi
ifconfig $MONDEV up
printf "\n\t\t\t\t(monitor mode enabled on $MONDEV)"
else
if [ -f /sys/class/ieee80211/"$PHYDEV"/add_iface ]
then
echo -n "$MONDEV" > /sys/class/ieee80211/"$PHYDEV"/add_iface
sleep 1s
if [ $3 -lt 1000 ]
then
iwconfig $MONDEV mode Monitor channel $3 >/dev/null 2>&1
else
iwconfig $MONDEV mode Monitor freq "$3"000000 >/dev/null 2>&1
fi
ifconfig $MONDEV up
printf "\n\t\t\t\t(monitor mode enabled on $MONDEV)"
else
printf "\n\nERROR: nl80211 support is disabled in your kernel.\nPlease recompile your kernel with nl80211 support enabled.\n"
fi
fi
else
if [ -f /sys/class/ieee80211/"$PHYDEV"/add_iface ]
then
echo -n "$MONDEV" > /sys/class/ieee80211/"$PHYDEV"/add_iface
sleep 1s
if [ $3 -lt 1000 ]
then
iwconfig $MONDEV mode Monitor channel $3 >/dev/null 2>&1
else
iwconfig $MONDEV mode Monitor freq "$3"000000 >/dev/null 2>&1
fi
ifconfig $MONDEV up
printf "\n\t\t\t\t(monitor mode enabled on $MONDEV)"
else
printf "\n\nERROR: Neither the sysfs interface links nor the iw command is available.\nPlease download and install iw from\n$IW_SOURCE\n"
fi
fi
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
z="`echo $iface | cut -b -${#MON_PREFIX}`"
if [ x$z = "x$MON_PREFIX" ]
then
if [ $USE_IW = 1 ]
then
IW_ERROR=`iw dev "$iface" interface del 2>&1 | grep "nl80211 not found"`
if [ x$IW_ERROR = "x" ]
then
printf " (removed)"
else
if [ -f /sys/class/ieee80211/"$PHYDEV"/remove_iface ]
then
echo -n "$iface" > /sys/class/ieee80211/"$PHYDEV"/remove_iface
printf " (removed)"
else
printf "\n\nERROR: nl80211 support is disabled in your kernel.\nPlease recompile your kernel with nl80211 support enabled.\n"
fi
fi
else
if [ -f /sys/class/ieee80211/"$PHYDEV"/remove_iface ]
then
echo -n "$iface" > /sys/class/ieee80211/"$PHYDEV"/remove_iface
printf " (removed)"
else
printf "\n\nERROR: Neither the sysfs interface links nor the iw command is available.\nPlease download and install iw from\n$IW_SOURCE\n"
fi
fi
else
ifconfig $iface down
iwconfig $iface mode managed
printf "\n\t\t\t\t(monitor mode disabled)"
fi
fi
echo
continue
fi
if [ x$DRIVER = "xorinoco" ] || [ x"`iwpriv $iface 2>/dev/null | grep get_rid`" != "x" ] || [ x"`iwpriv $iface 2>/dev/null | grep dump_recs`" != "x" ]
then
printf "$iface\t\tHermesI\t\torinoco"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
cp $KISMET~ $KISMET 2>/dev/null &&
echo "source=orinoco,$iface,HermesI" >>$KISMET
if [ $CH -lt 1000 ]
then
iwconfig $iface mode Monitor channel $CH >/dev/null 2>&1
else
iwconfig $iface mode Monitor freq "$CH"000000 >/dev/null 2>&1
fi
iwpriv $iface monitor 1 $CH >/dev/null 2>&1
ifconfig $iface up
printf " (monitor mode enabled)"
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
ifconfig $iface down
iwpriv $iface monitor 0 >/dev/null 2>&1
iwconfig $iface mode Managed >/dev/null 2>&1
printf " (monitor mode disabled)"
fi
echo
continue
fi
if [ x$DRIVER = "xrtl819xU" ]
then
printf "$iface\t\tRealtek 819x\trtl819xU"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
startStdIface $iface $CH
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
echo
continue
fi
if [ x$DRIVER = "xipw2100" ] || [ x"`iwpriv $iface 2>/dev/null | grep set_crc_check`" != "x" ]
then
printf "$iface\t\tIntel 2100B\tipw2100"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
cp $KISMET~ $KISMET 2>/dev/null &&
echo "source=ipw2100,$iface,Centrino_b" >>$KISMET
startStdIface $iface $CH
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
echo
continue
fi
if [ x$DRIVER = "xarusb_lnx" ] || [ x$DRIVER = "Otus" ]
then
printf "$iface\t\tAR9001USB\tOtus"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
echo "Monitor mode not yet supported"
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
echo
continue
fi
if [ x$DRIVER = "xWiLink" ]
then
getChipset $iface
printf "$iface\t\t${CHIPSET}\t\t${DRIVER}"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
printf "\n\t\t\t\tMonitor mode not yet supported"
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
echo
continue
fi
if [ x$DRIVER = "xipw2200" ] || [ x"`iwpriv $iface 2>/dev/null | grep sw_reset`" != "x" ]
then
MODINFO=`modinfo ipw2200 2>/dev/null | awk '/^version/ {print $2}'`
if { echo "$MODINFO" | grep -E '^1\.0\.(0|1|2|3)$' ; }
then
echo "Monitor mode not supported, please upgrade"
else
printf "$iface\t\tIntel 2200BG\tipw2200"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
cp $KISMET~ $KISMET 2>/dev/null &&
echo "source=ipw2200,$iface,Centrino_g" >>$KISMET
startStdIface $iface $CH
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
if { echo "$MODINFO" | grep -E '^1\.0\.(5|7|8|11)$' ; }
then
printf " (Warning: bad module version, you should upgrade)"
fi
fi
echo
continue
fi
if [ x$DRIVER = "xcx3110x" ] || [ x"`iwpriv $iface 2>/dev/null | grep set_backscan`" != "x" ]
then
printf "$iface\t\tNokia 770\t\tcx3110x"
if [ x$1 = "xstart" ] || [ x$1 = "xstop" ]
then
printf " (Enable/disable monitor mode not yet supported)"
fi
echo
continue
fi
if [ x$DRIVER = "xipw3945" ] || [ x"`iwpriv $iface 2>/dev/null | grep set_preamble | grep -v set_crc_check`" != "x" ]
then
printf "$iface\t\tIntel 3945ABG\tipw3945"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
cp $KISMET~ $KISMET 2>/dev/null &&
echo "source=ipw3945,$iface,Centrino_g" >>$KISMET
startStdIface $iface $CH
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
echo
continue
fi
if [ x"`iwpriv $iface 2>/dev/null | grep inact_auth`" != "x" ]
then
if [ -e "/proc/sys/net/$iface/%parent" ]
then
printf "$iface\t\tAtheros\t\tmadwifi-ng VAP (parent: `cat /proc/sys/net/$iface/%parent`)"
if [ x$2 = x$iface ] && [ x$1 = "xstop" ]
then
wlanconfig $iface destroy
printf " (VAP destroyed)"
fi
if [ x$1 = "xstart" ]
then
if [ $iface = "$IFACE" ]
then
printf " (monitor mode enabled)"
fi
if [ x$2 = x$iface ]
then
printf " (VAP cannot be put in monitor mode)"
fi
fi
echo ""
continue
fi
printf "$iface\t\tAtheros\t\tmadwifi"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
cp $KISMET~ $KISMET 2>/dev/null &&
echo "source=madwifi_g,$iface,Atheros" >>$KISMET
startStdIface $iface $CH
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
echo
continue
fi
if [ x$DRIVER = "xprism54" ] || [ x"`iwpriv $iface 2>/dev/null | grep getPolicy`" != "x" ]
then
printf "$iface\t\tPrismGT\t\tprism54"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
cp $KISMET~ $KISMET 2>/dev/null &&
echo "source=prism54g,$iface,Prism54" >>$KISMET
ifconfig $iface up
if [ $CH -lt 1000 ]
then
iwconfig $iface mode Monitor channel $CH
else
iwconfig $iface mode Monitor freq "$CH"000000
fi
iwpriv $iface set_prismhdr 1 >/dev/null 2>&1
printf " (monitor mode enabled)"
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
echo
continue
fi
if [ x$DRIVER = "xhostap" ] || [ x"`iwpriv $iface 2>/dev/null | grep antsel_rx`" != "x" ]
then
printf "$iface\t\tPrism 2/2.5/3\tHostAP"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
cp $KISMET~ $KISMET 2>/dev/null &&
echo "source=hostap,$iface,Prism2" >>$KISMET
if [ $CH -lt 1000 ]
then
iwconfig $iface mode Monitor channel $CH
else
iwconfig $iface mode Monitor freq "$CH"000000
fi
iwpriv $iface monitor_type 1 >/dev/null 2>&1
ifconfig $iface up
printf " (monitor mode enabled)"
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
echo
continue
fi
if [ x$DRIVER = "xwlan-ng" ] || [ x"`wlancfg show $iface 2>/dev/null | grep p2CnfWEPFlags`" != "x" ]
then
printf "$iface\t\tPrism 2/2.5/3\twlan-ng"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
cp $KISMET~ $KISMET 2>/dev/null &&
echo "source=wlanng,$iface,Prism2" >>$KISMET
wlanctl-ng $iface lnxreq_ifstate ifstate=enable >/dev/null
wlanctl-ng $iface lnxreq_wlansniff enable=true channel=$CH \
prismheader=true wlanheader=false \
stripfcs=true keepwepflags=true >/dev/null
echo p2CnfWEPFlags=0,4,7 | wlancfg set $iface
ifconfig $iface up
printf " (monitor mode enabled)"
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
ifconfig $iface down
wlanctl-ng $iface lnxreq_wlansniff enable=false >/dev/null
wlanctl-ng $iface lnxreq_ifstate ifstate=disable >/dev/null
printf " (monitor mode disabled)"
fi
echo
continue
fi
if [ x$SYSFS = "x" ] && [ x"`iwpriv $iface 2>/dev/null | grep get_RaAP_Cfg`" != "x" ]
then
if [ x"`iwconfig $iface | grep ESSID | awk -F\ '{ print $2}' | grep -i rt61`" != "x" ]
then
printf "$iface\t\tRalink 2561 PCI\trt61"
fi
if [ x"`iwconfig $iface | grep ESSID | awk -F\ '{ print $2}' | grep -i rt73`" != "x" ]
then
printf "$iface\t\tRalink 2573 USB\trt73"
fi
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
startStdIface $iface $CH
iwpriv $iface rfmontx 1
if [ x"`iwpriv $iface 2>/dev/null | grep forceprismheader`" != "x" ]
then
iwpriv $iface forceprismheader 1
fi
if [ x"`iwpriv $iface 2>/dev/null | grep forceprism`" != "x" ]
then
iwpriv $iface forceprism 1
fi
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
echo
continue
fi
if [ x$DRIVER = "xrt61" ]
then
printf "$iface\t\tRalink 2561 PCI\trt61"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
startStdIface $iface $CH
iwpriv $iface rfmontx 1
if [ x"`iwpriv $iface 2>/dev/null | grep forceprismheader`" != "x" ]
then
iwpriv $iface forceprismheader 1
fi
if [ x"`iwpriv $iface 2>/dev/null | grep forceprism`" != "x" ]
then
iwpriv $iface forceprism 1
fi
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
echo
continue
fi
if [ x$DRIVER = "xrt73" ]
then
printf "$iface\t\tRalink 2573 USB\trt73"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
startStdIface $iface $CH
iwpriv $iface rfmontx 1
if [ x"`iwpriv $iface 2>/dev/null | grep forceprismheader`" != "x" ]
then
iwpriv $iface forceprismheader 1
fi
if [ x"`iwpriv $iface 2>/dev/null | grep forceprism`" != "x" ]
then
iwpriv $iface forceprism 1
fi
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
echo
continue
fi
if [ x$DRIVER = "xrt2500" ] || [ x"`iwpriv $iface 2>/dev/null | grep bbp`" != "x" ]
then
printf "$iface\t\tRalink 2560 PCI\trt2500"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
cp $KISMET~ $KISMET 2>/dev/null &&
echo "source=rt2500,$iface,Ralink_g" >>$KISMET
iwconfig $iface mode ad-hoc 2> /dev/null >/dev/null
startStdIface $iface $CH
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
echo
continue
fi
if [ x$DRIVER = "xrt2570" ] || [ x"`iwpriv $iface 2>/dev/null | grep wpapsk`" != "x" ] && [ x"`iwpriv $iface 2>/dev/null | grep get_RaAP_Cfg`" = "x" ]
then
printf "$iface\t\tRalink 2570 USB\trt2570"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
cp $KISMET~ $KISMET 2>/dev/null &&
echo "source=rt2500,$iface,Ralink_g" >>$KISMET
iwconfig $iface mode ad-hoc 2> /dev/null >/dev/null
startStdIface $iface $CH
if [ x"`iwpriv $iface 2>/dev/null | grep forceprismheader`" != "x" ]
then
iwpriv $iface forceprismheader 1
fi
if [ x"`iwpriv $iface 2>/dev/null | grep forceprism`" != "x" ]
then
iwpriv $iface forceprism 1
fi
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
echo
continue
fi
if [ x$DRIVER = "xr8180" ] || [ x"`iwpriv $iface 2>/dev/null | grep debugtx`" != "x" ]
then
printf "$iface\t\tRTL8180/RTL8185\tr8180"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
cp $KISMET~ $KISMET 2>/dev/null &&
echo "source=rt8180,$iface,Realtek" >>$KISMET
if [ $CH -lt 1000 ]
then
iwconfig $iface mode Monitor channel $CH
else
iwconfig $iface mode Monitor freq "$CH"000000
fi
if [ x"`iwpriv $iface 2>/dev/null | grep prismhdr`" != "x" ]
then
iwpriv $iface prismhdr 1 >/dev/null 2>&1
fi
ifconfig $iface up
printf " (monitor mode enabled)"
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
echo
continue
fi
if [ x$DRIVER = "xr8187" ] || [ x"`iwpriv $iface 2>/dev/null | grep badcrc`" != "x" ]
then
printf "$iface\t\tRTL8187\t\tr8187"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
cp $KISMET~ $KISMET 2>/dev/null &&
echo "source=rt8180,$iface,Realtek" >>$KISMET
if [ $CH -lt 1000 ]
then
iwconfig $iface mode Monitor channel $CH
else
iwconfig $iface mode Monitor freq "$CH"000000
fi
if [ x"`iwpriv $iface 2>/dev/null | grep rawtx`" != "x" ]
then
iwpriv $iface rawtx 1 >/dev/null 2>&1
fi
ifconfig $iface up
printf " (monitor mode enabled)"
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
echo
continue
fi
if [ x$DRIVER = "xzd1211rw" ] || [ x"`iwpriv $iface 2>/dev/null | grep get_regdomain`" != "x" ]
then
printf "$iface\t\tZyDAS 1211\tzd1211rw"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
cp $KISMET~ $KISMET 2>/dev/null &&
echo "source=zd1211,$iface,ZyDAS" >>$KISMET
startStdIface $iface $CH
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
echo
continue
fi
if [ x$DRIVER = "xzd1211" ] || [ x"`iwpriv $iface 2>/dev/null | grep dbg_flag`" != "x" ]
then
printf "$iface\t\tZyDAS 1211\tzd1211"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
cp $KISMET~ $KISMET 2>/dev/null &&
echo "source=zd1211,$iface,ZyDAS" >>$KISMET
startStdIface $iface $CH
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
echo
continue
fi
if [ x$DRIVER = "xacx" ] || [ x"`iwpriv $iface 2>/dev/null | grep GetAcx1`" != "x" ]
then
printf "$iface\t\tTI ACX1xx\tacx"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
cp $KISMET~ $KISMET 2>/dev/null &&
echo "source=acx100,$iface,TI" >>$KISMET
iwpriv $iface monitor 2 $CH 2> /dev/null >/dev/null
startStdIface $iface $CH
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
echo
continue
fi
if [ x$DRIVER = "xbcm43xx" ] || [ x"`iwpriv $iface 2>/dev/null | grep write_sprom`" != "x" ]
then
printf "$iface\t\tBroadcom\tbcm43xx"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
cp $KISMET~ $KISMET 2>/dev/null &&
echo "source=bcm43xx,$iface,broadcom" >>$KISMET
startStdIface $iface $CH
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
ifconfig $iface up
fi
echo
continue
fi
if [ x$DRIVER = "xislsm" ] || [ x"`iwpriv $iface 2>/dev/null | grep set_announcedpkt`" != "x" ]
then
printf "$iface\t\tPrismGT\t\tislsm"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
startStdIface $iface $CH
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
echo
continue
fi
if [ x$DRIVER = "xat76c503a" ] || [ x"`iwpriv $iface 2>/dev/null | grep set_announcedpkt`" != "x" ]
then
printf "$iface\t\tAtmel\t\tat76c503a"
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
startStdIface $iface $CH
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
echo
continue
fi
if [ x$DRIVER = "xndiswrapper" ] || [ x"`iwpriv $iface 2>/dev/null | grep ndis_reset`" != "x" ]
then
printf "$iface\t\tUnknown\t\tndiswrapper"
if [ x$2 = x$iface ]
then
echo " (MONITOR MODE NOT SUPPORTED)"
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
echo
continue
fi
if [ x$DRIVER != "x" ]
then
if [ x$CHIPSET = "x" ]
then
printf "$iface\t\tUNKNOWN\t\t$DRIVER"
else
printf "$iface\t\t$CHIPSET\t\t$DRIVER"
fi
if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
then
startStdIface $iface $CH
fi
if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
then
stopStdIface $iface
fi
echo
continue
fi
printf "$iface\t\tUnknown\t\tUnknown (MONITOR MODE NOT SUPPORTED)\n"
done
################################ < STOP > #########################