diff --git a/stable/airmon b/stable/airmon
deleted file mode 100755
index 861f9bd..0000000
--- a/stable/airmon
+++ /dev/null
@@ -1,1329 +0,0 @@
-#!/bin/sh
-
-USERID=""
-IFACE=""
-KISMET=/etc/kismet/kismet.conf
-CH=$3; [ x$3 = "x" ] && CH=10
-IFACE_FOUND="false"
-MADWIFI=0
-MAC80211=0
-USE_IW=0
-IW_SOURCE="https://www.kernel.org/pub/software/network/iw/iw-3.17.tar.xz"
-IW_ERROR=""
-UDEV_ISSUE=0
-
-if [ -f "`which iw 2>&1`" ]
-then
-	USE_IW=1
-fi
-
-if [ "x$MON_PREFIX" = "x" ]
-then
-MON_PREFIX="mon"
-fi
-
-PROCESSES="wpa_action\|wpa_supplicant\|wpa_cli\|dhclient\|ifplugd\|dhcdbd\|dhcpcd\|NetworkManager\|knetworkmanager\|avahi-autoipd\|avahi-daemon\|wlassistant\|wifibox"
-PS_ERROR="invalid"
-
-usage() {
-	printf "usage: `basename $0` <start|stop|check> <interface> [channel or frequency]\n"
-	echo
-	exit
-}
-
-startStdIface() {
-	iwconfig $1 mode monitor >/dev/null 2>&1
-	if [ ! -z $2 ]
-	then
-	    if [ $2 -lt 1000 ]
-	    then
-		iwconfig $1 channel $2 >/dev/null 2>&1
-	    else
-		iwconfig $1 freq "$2"000000 > /dev/null 2>&1
-	    fi
-	fi
-	iwconfig $1 key off >/dev/null 2>&1
-	ifconfig $1 up
-	printf " (monitor mode enabled)"
-}
-
-
-stopStdIface() {
-	ifconfig $1 down >/dev/null 2>&1
-	iwconfig $1 mode Managed >/dev/null 2>&1
-	ifconfig $1 down >/dev/null 2>&1
-	printf " (monitor mode disabled)"
-}
-
-getModule() {
-    if [ -f "/sys/class/net/$1/device/driver/module/srcversion" ]
-    then
-        srcver1=`cat "/sys/class/net/$1/device/driver/module/srcversion"`
-        for j in `lsmod | awk '{print $1}' | grep -v "^Module$"`
-        do
-            srcver2="`modinfo $j 2>/dev/null | grep srcversion | awk '{print $2}'`"
-            if [ $srcver1 = "$srcver2" ]
-            then
-                MODULE=$j
-                break
-            fi
-        done
-    else
-        MODULE=""
-    fi
-#    return 0
-}
-
-getDriver() {
-   if [ -e "/sys/class/net/$1/device/driver" ]
-   then
-       DRIVER="`ls -l "/sys/class/net/$1/device/driver" | sed 's/^.*\/\([a-zA-Z0-9_-]*\)$/\1/'`"
-       BUS="`ls -l "/sys/class/net/$1/device/driver" | sed 's/^.*\/\([a-zA-Z0-9_-]*\)\/.*\/.*$/\1/'`"
-   else
-       DRIVER=""
-       BUS=""
-   fi
-   if [ x$(echo $DRIVER | grep ath5k) != "x" ]
-   then
-       DRIVER="ath5k"
-   fi
-   if [ x$(echo $DRIVER | grep ath9k) != "x" ]
-   then
-       DRIVER="ath9k"
-   fi
-   if [ x$DRIVER = "x" ]
-   then
-	if [ -d /sys/class/net/tiwlan0/wireless ]
-	then
-		DRIVER=WiLink
-	fi
-   fi
-
-}
-
-scanProcesses() {
-    if [ -f "`which service 2>&1`" ] && [ x"$1" = "xkill" ]
-    then
-    	service network-manager stop 2>/dev/null >/dev/null
- 	service avahi-daemon stop 2>/dev/null >/dev/null
-    fi
-
-    match=`ps -A -o comm= | grep $PROCESSES | grep -v grep | wc -l`
-    if [ $match -gt 0 -a x"$1" != "xkill" ]
-    then
-        printf "\n\n"
-        echo "Found $match processes that could cause trouble."
-        echo "If airodump-ng, aireplay-ng or airtun-ng stops working after"
-        echo "a short period of time, you may want to kill (some of) them!"
-        echo -e "\nPID\tName"
-    else
-        if [ x"$1" != "xkill" ]
-        then
-            return
-        fi
-    fi
-
-    if [ $match -gt 0 -a x"$1" = "xkill" ]
-    then
-        echo "Killing all those processes..."
-    fi
-
-    i=1
-    while [ $i -le $match ]
-    do
-        pid=`ps -A -o pid= -o comm= | grep $PROCESSES | grep -v grep | head -n $i | tail -n 1 | awk '{print $1}'`
-        pname=`ps -A -o pid= -o comm= | grep $PROCESSES | grep -v grep | head -n $i | tail -n 1 | awk '{print $2}'`
-        if [ x"$1" != "xkill" ]
-        then
-            printf "$pid\t$pname\n"
-        else
-            kill $pid
-        fi
-        i=$(($i+1))
-    done
-}
-
-checkProcessesIface() {
-    if [ x"$1" = "x" ]
-    then
-        return
-    fi
-
-    match2=`ps -o comm= -p 1 2>&1 | grep $PS_ERROR | grep -v grep | wc -l`
-    if [ $match2 -gt 0 ]
-    then
-	return
-    fi
-
-    for i in `ps auxw | grep $1 | grep -v "grep" | grep -v "airmon" | awk '{print $2}'`
-    do
-        pname=`ps -o comm= -p $i`
-        echo "Process with PID $i ($pname) is running on interface $1"
-    done
-}
-
-getStack() {
-    if [ x"$1" = "x" ]
-    then
-        return
-    fi
-
-    if [ -d /sys/class/net/$1/phy80211/ ]
-    then
-        MAC80211=1
-    else
-        MAC80211=0
-    fi
-}
-
-#you need to run getDriver $iface prior to getChipset
-getChipset() {
-    if [ x"$1" = "x" ]
-    then
-        return
-    fi
-
-    CHIPSET="Unknown "
-
-    if [ x$DRIVER = "xOtus" -o x$DRIVER = "xarusb_lnx" ]
-    then
-		CHIPSET="AR9001U"
-    fi
-
-    if [ x$DRIVER = "xWiLink" ]
-    then
-	CHIPSET=`dmesg | grep TIWLAN | grep CHIP | tail -n 1 | awk -F\  '{ print $6 }'` 
-   	if [ x$CHIPSET = "x" ]
-	then
-		CHIPSET="Unknown"
-	else
-		CHIPSET="TI${CHIPSET}"	
-	fi 
-    fi
-    
-    if [ x$DRIVER = "xar9170usb" ]
-    then
-    	getPhy $2
-    	CHIPSET="Atheros `dmesg | grep $PHYDEV | grep "is registered as" | cut -d':' -f 2 | cut -d' ' -f 3`"
-    fi
-
-    if [ x$DRIVER = "xzd1211rw_mac80211" ]
-    then
-        CHIPSET="ZyDAS 1211"
-    fi
-
-	if [ x$DRIVER = "xzd1211rw" ]
-    then
-        getPhy $2
-        TEMP_USBPORT="`dmesg | grep $PHYDEV | grep zd1211rw | cut -d'w' -f 2 | cut -d' ' -f 2`"
-        TEMP_CHIPSET="`dmesg | grep "$TEMP_USBPORT" | grep chip | tail -n 1 | cut -d':' -f 3 | cut -d' ' -f 2`"
-        CHIPSET="Zydas $TEMP_CHIPSET"
-    fi
-
-    if [ x$DRIVER = "xacx" -o x$DRIVER = "xacx-mac80211" -o x$DRIVER = "xacx1xx" ]
-    then
-        CHIPSET="TI ACX1xx"
-    fi
-
-    if [ x$DRIVER = "adm8211" ]
-    then
-        CHIPSET="ADMtek 8211"
-    fi
-
-    if [ x$DRIVER = "xat76_usb" ]
-    then
-        CHIPSET="Atmel   "
-    fi
-
-    if [ x$DRIVER = "xb43" -o x$DRIVER = "xb43legacy" -o x$DRIVER = "xbcm43xx" -o x$DRIVER = "xwl" ]
-    then
-        CHIPSET="Broadcom"
-        if [ x$DRIVER = "xb43" ]
-        then
-        	getPhy $2
-        	TEMP_CHIPSET="`dmesg | grep $PHYDEV | grep found | cut -d':' -f 2 | cut -d' ' -f 3`"
-        	if [ x$TEMP_CHIPSET = "x4318" ]
-        	then
-        		CHIPSET="$CHIPSET $TEMP_CHIPSET"
-        	fi
-        fi
-    fi
-
-    if [ x$DRIVER = "xprism54" -o x$DRIVER = "xp54pci" -o x$DRIVER = "xp54usb" ]
-    then
-        CHIPSET="PrismGT "
-    fi
-
-    if [ x$DRIVER = "xhostap" ]
-    then
-        CHIPSET="Prism 2/2.5/3"
-    fi
-
-    if [ x$DRIVER = "xr8180" -o x$DRIVER = "xrtl8180" ]
-    then
-        CHIPSET="RTL8180/RTL8185"
-    fi
-
-    # r8187 is reporting itself as rtl8187
-    if [ x$DRIVER = "xrtl8187" ]
-    then
-        getPhy $2
-       if [ x"$PHYDEV" = "x" ]
-       then
-               CHIPSET="RTL8187 "
-       else
-               CHIPSET="`dmesg | grep $PHYDEV | grep hwaddr | cut -d',' -f 2 | cut -d' ' -f 2`"
-               if [ x$CHIPSET = "xRTL8187vB" ]
-               then
-                       CHIPSET="Realtek RTL8187L"
-               else
-                       CHIPSET="Realtek $CHIPSET"
-               fi
-       fi
-    fi
-    
-    if [ x$DRIVER = "xr8187" ]
-    then
-        CHIPSET="RTL8187 "
-    fi
-
-    if [ x$DRIVER = "xrt2570" -o x$DRIVER = "xrt2500usb" ]
-    then
-        CHIPSET="Ralink 2570 USB"
-    fi
-
-    if [ x$DRIVER = "xrt2400" -o x$DRIVER = "xrt2400pci" ]
-    then
-        CHIPSET="Ralink 2400 PCI"
-    fi
-
-    if [ x$DRIVER = "xrt2500" -o x$DRIVER = "xrt2500pci" ]
-    then
-        CHIPSET="Ralink 2560 PCI"
-    fi
-
-    if [ x$DRIVER = "xrt61" -o x$DRIVER = "xrt61pci" ]
-    then
-        CHIPSET="Ralink 2561 PCI"
-    fi
-
-    if [ x$DRIVER = "xrt73" -o x$DRIVER = "xrt73usb" ]
-    then
-        CHIPSET="Ralink 2573 USB"
-    fi
-
-	#if [ x$DRIVER = "xrt2800usb" ]
-	#then
-	#	getPhy $2
-	#	CHIPSET="Ralink `dmesg | grep rt2800usb | grep firmware | cut -d':' -f 4 | cut -d' ' -f 3 | cut -d'.' -f 1`"
-	#fi
-	
-    if [ x$DRIVER = "xrt2800" -o x$DRIVER = "xrt2800usb" -o x$DRIVER = "xrt3070sta" ]
-    then
-        CHIPSET="Ralink RT2870/3070"
-    fi
-
-    if [ x$DRIVER = "xipw2100" ]
-    then
-        CHIPSET="Intel 2100B"
-    fi
-
-    if [ x$DRIVER = "xipw2200" ]
-    then
-        CHIPSET="Intel 2200BG/2915ABG"
-    fi
-
-    if [ x$DRIVER = "xipw3945" -o x$DRIVER = "xipwraw" -o x$DRIVER = "xiwl3945" ]
-    then
-        CHIPSET="Intel 3945ABG"
-    fi
-
-    if [ x$DRIVER = "xipw4965" -o x$DRIVER = "xiwl4965" ]
-    then
-        CHIPSET="Intel 4965AGN"
-    fi
-
-    if [ x$DRIVER = "xiwlagn" -o x$DRIVER = "xiwlwifi" ]
-    then
-        CHIPSET="Intel 4965/5xxx/6xxx/1xxx"
-        
-        DETECTED_STR="`dmesg | grep $DRIVER | grep Detected | tail -n 1 `"
-        LINK_POS="3"
-        FOUND="0"
-        
-        if [ x"$DETECTED_STR" != "x" ]
-        then
-        	INTEL_WORD="Link"
-        	if [ "`echo "$DETECTED_STR" | grep $INTEL_WORD | wc -l`" = "0" ]
-        	then
-        		INTEL_WORD="Wireless"
-        		if [ "`echo "$DETECTED_STR" | grep $INTEL_WORD | wc -l`" = "0" ]
-			then
-				INTEL_WORD="Ultimate"
-        			if [ "`echo "$DETECTED_STR" | grep $INTEL_WORD | wc -l`" = "0" ]
-				then
-						INTEL_WORD="Advanced"
-	        		fi	
-			fi
-        	fi
-        	
-        	while [ $FOUND = "0" ]
-		do
-			FOUND=`echo "$DETECTED_STR" | cut -d' ' -f $LINK_POS | grep $INTEL_WORD | wc -l`
-			LINK_POS=$(($LINK_POS+1))
-		done
-
-		TEMP_CHIPSET=`echo "$DETECTED_STR" | cut -d' ' -f $LINK_POS`
-
-		case "x${TEMP_CHIPSET}" in
-	#               x5100AGN)
-	#                       CHIPSET="Intel $TEMP_CHIPSET"
-	#                       ;;
-			x5300)
-				TYPE_TEMP=`echo "$DETECTED_STR" | cut -d' ' -f $(($LINK_POS+1)) | awk -F, '{ print $1 }' `
-				CHIPSET="Intel ${TEMP_CHIPSET}${TYPE_TEMP}"
-				;;
-			x1000)
-				TYPE_TEMP=`echo "$DETECTED_STR" | cut -d' ' -f $[$LINK_POS+2]`
-				CHIPSET="Intel ${TEMP_CHIPSET}${TYPE_TEMP}"
-				;;
-			*)
-				CHIPSET="Intel $TEMP_CHIPSET"
-				;;
-		esac
-        fi
-
-    fi
-
-	if [ x$DRIVER = "xath5k" ]
-	then
-		getPhy $2
-		CHIPSET="Atheros `dmesg | grep $PHYDEV | grep "chip found" | cut -d':' -f 2 | cut -d' ' -f 3`"
-	fi
-	
-    if [ x$DRIVER = "xath_pci" ]
-    then
-        CHIPSET="Atheros "
-    fi
-    
-    if [ x$DRIVER = "xath9k" ]
-    then
-    	getPhy $2
-    	CHIPSET="Atheros `dmesg | grep $PHYDEV | grep Atheros | tail -n 1 | cut -d':' -f 2 | cut -d' ' -f 3`"
-    fi
-
-    if [ x$DRIVER = "xorinoco" ]
-    then
-        CHIPSET="Hermes/Prism"
-    fi
-    
-    if [ x$DRIVER = "xath9k_htc" -o x$DRIVER = "xusb" ]
-    then
-        CHIPSET="AR9001/9002/9271"
-    fi
-    
-    if [ x$DRIVER = "xwl12xx" ]
-    then
-            CHIPSET="TI WL1251/WL1271"
-            IS_WL1251="`dmesg| grep firmware | grep wl1251 | wc -l`"
-            IS_WL1271="`dmesg| grep firmware | grep wl1271 | wc -l`"
-
-            if [ $IS_WL1251 != "0" ] && [ $IS_WL1271 = "0" ]
-            then
-                CHIPSET="TI WL1251"
-            fi
-            if [ $IS_WL1271 != "0" ] && [ $IS_WL1251 = "0" ]
-            then
-                CHIPSET="TI WL1271"
-            fi
-            # In any other case, we can't determine the chipset and thus give the generic: 1251/1271
-    fi
-    
-    
-    if [ x$DRIVER = "xr871x_usb_drv" ]
-    then
-            CHIPSET="Realtek 81XX"
-    fi
-    
-    if [ x$DRIVER = "xcarl9170" ]
-    then
-            getPhy $2
-            CHIPSET=`dmesg | grep usb | grep $PHYDEV | awk -F\  '{ print $3 " " $4 }'`
-	    if [ `echo $CHIPSET | grep -i atheros | wc -l` -eq 0 ]
-	    then
-		CHIPSET=`dmesg | grep usb | grep $PHYDEV | awk -F\  '{ print $5 " " $6 }'`
-	    fi
-    fi
-}
-
-getPhy() {
-    PHYDEV=""
-    if [ x"$1" = "x" ]
-    then
-        return
-    fi
-
-    if [ x$MAC80211 = "x" ]
-    then
-        return
-    fi
-
-    if [ -d /sys/class/net/$1/phy80211/ ]
-    then
-	PHYDEV="`ls -l "/sys/class/net/$1/phy80211" | sed 's/^.*\/\([a-zA-Z0-9_-]*\)$/\1/'`"
-    fi
-}
-
-getNewMon() {
-    i=0
-
-    while [ -d /sys/class/net/$MON_PREFIX$i/ ]
-    do
-        i=$(($i+1))
-    done
-
-    MONDEV="$MON_PREFIX$i"
-}
-
-if [ x"`which id 2> /dev/null`" != "x" ]
-then
-	USERID="`id -u 2> /dev/null`"
-fi
-
-if [ x$USERID = "x" -a x$UID != "x" ]
-then
-	USERID=$UID
-fi
-
-if [ x$USERID != "x" -a x$USERID != "x0" ]
-then
-	echo Run it as root ; exit ;
-fi
-
-iwpriv > /dev/null 2> /dev/null ||
-  { echo Wireless tools not found ; exit ; }
-
-if [ x"$1" = "xcheck" ] || [ x"$1" = "xstart" ]
-then
-    scanProcesses
-    for iface in `iwconfig 2>/dev/null | egrep '(IEEE|ESSID|802\.11|WLAN)' | sed 's/^\([a-zA-Z0-9_.]*\) .*/\1/' | grep -v wifi`
-    do
-#         getModule $iface
-#         getDriver $iface
-        checkProcessesIface $iface
-    done
-
-    if [ x"$2" = "xkill" ]
-    then
-        scanProcesses "$2"
-    fi
-    if [ x"$1" = "xcheck" ]
-    then
-        exit
-    fi
-fi
-
-printf "\n\n"
-
-if [ $# -ne "0" ]
-then
-    if [ x$1 != "xstart" ] && [ x$1 != "xstop" ]
-    then
-        usage
-    fi
-
-    if [ x$2 = "x" ]
-    then
-        usage
-    fi
-fi
-
-SYSFS=0
-if [ -d /sys/ ]
-then
-    SYSFS=1
-fi
-
-printf "Interface\tChipset\t\tDriver\n\n"
-
-
-for iface in `ifconfig -a 2>/dev/null | egrep UNSPEC | sed 's/^\([a-zA-Z0-9_]*\) .*/\1/'`
-do
-
- if [ x"`iwpriv $iface 2>/dev/null | grep ipwraw-ng`" != "x" ]
- then
-        printf "$iface\t\tIntel 3945ABG\tipwraw-ng"
-        if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-        then
-                cp $KISMET~ $KISMET 2>/dev/null &&
-                echo "source=ipw3945,$iface,Centrino_abg" >>$KISMET
-                startStdIface $iface $CH
-                iwconfig $iface rate 1M 2> /dev/null >/dev/null
-                iwconfig $iface txpower 16 2> /dev/null >/dev/null
-        fi
-        if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-        then
-                stopStdIface $iface
-                iwconfig $iface txpower 15 2> /dev/null >/dev/null
-                iwconfig $iface rate 54M 2> /dev/null >/dev/null
-        fi
-        echo
-        continue
- fi
-
- if [ -e "/proc/sys/dev/$iface/fftxqmin" ]
- then
-    MADWIFI=1
-    ifconfig $iface up
-    printf "$iface\t\tAtheros\t\tmadwifi-ng"
-    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-    then
-        IFACE=`wlanconfig ath create wlandev $iface wlanmode monitor -bssid | grep ath`
-        cp $KISMET~ $KISMET 2>/dev/null &&
-        echo "source=madwifi_g,$iface,Atheros" >>$KISMET
-        ifconfig $iface up 2>/dev/null >/dev/null
-        if [ $CH -lt 1000 ]
-        then
-            iwconfig $IFACE channel $CH 2>/dev/null >/dev/null
-        else
-            iwconfig $IFACE freq "$CH"000000 2>/dev/null >/dev/null
-        fi
-        ifconfig $IFACE up 2>/dev/null >/dev/null
-        UDEV_ISSUE=$?
-    fi
-    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-    then
-            echo "$iface does not support 'stop', do it on ath interface"
-    fi
-    echo
-    continue
- fi
-done
-
-if [ $MADWIFI -eq 1 ]
-then
-	sleep 1s
-fi
-
-for iface in `iwconfig 2>/dev/null | egrep '(IEEE|ESSID|802\.11|WLAN)' | sed 's/^\([a-zA-Z0-9_.]*\) .*/\1/' | grep -v wifi`
-do
- getModule  $iface
- getDriver  $iface
- getStack   $iface
- getChipset $DRIVER $iface
-
-
- if [ x$MAC80211 = "x1" ]
- then
-    getPhy $iface
-    getNewMon
-    printf "$iface\t\t$CHIPSET\t$DRIVER - [$PHYDEV]"
-    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-    then
-        if [ $USE_IW = 1 ]
-        then
-            IW_ERROR=`iw dev $iface interface add $MONDEV type monitor 2>&1 | grep "nl80211 not found"`
-            if [ x$IW_ERROR = "x" ]
-            then
-                sleep 1s
-		if [ ! -z $3 ]
-                then
-            	    if [ $3 -lt 1000 ]
-            	    then
-                	iwconfig $MONDEV channel $3 >/dev/null 2>&1
-            	    else
-                	iwconfig $MONDEV freq "$3"000000 >/dev/null 2>&1
-            	    fi
-            	fi
-                ifconfig $MONDEV up
-                printf "\n\t\t\t\t(monitor mode enabled on $MONDEV)"
-            else
-                if [ -f /sys/class/ieee80211/"$PHYDEV"/add_iface ]
-                then
-                    echo -n "$MONDEV" > /sys/class/ieee80211/"$PHYDEV"/add_iface
-                    sleep 1s
-                    if [ $3 -lt 1000 ]
-                    then
-                        iwconfig $MONDEV mode Monitor channel $3 >/dev/null 2>&1
-                    else
-                        iwconfig $MONDEV mode Monitor freq "$3"000000 >/dev/null 2>&1
-                    fi
-                    ifconfig $MONDEV up
-                    printf "\n\t\t\t\t(monitor mode enabled on $MONDEV)"
-                else
-                    printf "\n\nERROR: nl80211 support is disabled in your kernel.\nPlease recompile your kernel with nl80211 support enabled.\n"
-                fi
-            fi
-        else
-            if [ -f /sys/class/ieee80211/"$PHYDEV"/add_iface ]
-            then
-                echo -n "$MONDEV" > /sys/class/ieee80211/"$PHYDEV"/add_iface
-                sleep 1s
-                if [ $3 -lt 1000 ]
-                then
-                    iwconfig $MONDEV mode Monitor channel $3 >/dev/null 2>&1
-                else
-                    iwconfig $MONDEV mode Monitor freq "$3"000000 >/dev/null 2>&1
-                fi
-                ifconfig $MONDEV up
-                printf "\n\t\t\t\t(monitor mode enabled on $MONDEV)"
-            else
-                printf "\n\nERROR: Neither the sysfs interface links nor the iw command is available.\nPlease download and install iw from\n$IW_SOURCE\n"
-            fi
-        fi
-    fi
-    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-    then
-        z="`echo $iface | cut -b -${#MON_PREFIX}`"
-        if [ x$z = "x$MON_PREFIX" ]
-        then
-            if [ $USE_IW = 1 ]
-            then
-                IW_ERROR=`iw dev "$iface" interface del 2>&1 | grep "nl80211 not found"`
-                if [ x$IW_ERROR = "x" ]
-                then
-                    printf " (removed)"
-                else
-                    if [ -f /sys/class/ieee80211/"$PHYDEV"/remove_iface ]
-                    then
-                        echo -n "$iface" > /sys/class/ieee80211/"$PHYDEV"/remove_iface
-                        printf " (removed)"
-                    else
-                        printf "\n\nERROR: nl80211 support is disabled in your kernel.\nPlease recompile your kernel with nl80211 support enabled.\n"
-                fi
-                fi
-            else
-                if [ -f /sys/class/ieee80211/"$PHYDEV"/remove_iface ]
-                then
-                    echo -n "$iface" > /sys/class/ieee80211/"$PHYDEV"/remove_iface
-                    printf " (removed)"
-                else
-                    printf "\n\nERROR: Neither the sysfs interface links nor the iw command is available.\nPlease download and install iw from\n$IW_SOURCE\n"
-                fi
-	    fi
-        else
-            ifconfig $iface down
-            iwconfig $iface mode managed
-            printf "\n\t\t\t\t(monitor mode disabled)"
-        fi
-    fi
-    echo
-    continue
- fi
-
-
- if [ x$DRIVER = "xorinoco" ] || [ x"`iwpriv $iface 2>/dev/null | grep get_rid`" != "x" ] || [ x"`iwpriv $iface 2>/dev/null | grep dump_recs`" != "x" ]
- then
-    printf "$iface\t\tHermesI\t\torinoco"
-    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-    then
-        cp $KISMET~ $KISMET 2>/dev/null &&
-        echo "source=orinoco,$iface,HermesI" >>$KISMET
-        if [ $CH -lt 1000 ]
-        then
-            iwconfig $iface mode Monitor channel $CH >/dev/null 2>&1
-        else
-            iwconfig $iface mode Monitor freq "$CH"000000 >/dev/null 2>&1
-        fi
-        iwpriv $iface monitor 1 $CH >/dev/null 2>&1
-        ifconfig $iface up
-        printf " (monitor mode enabled)"
-    fi
-    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-    then
-        ifconfig $iface down
-        iwpriv $iface monitor 0 >/dev/null 2>&1
-        iwconfig $iface mode Managed >/dev/null 2>&1
-        printf " (monitor mode disabled)"
-    fi
-    echo
-    continue
- fi
-
- if [ x$DRIVER = "xrtl819xU" ]
- then
- 	printf "$iface\t\tRealtek 819x\trtl819xU"
-    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-    then
-        startStdIface $iface $CH
-    fi
-    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-    then
-        stopStdIface $iface
-    fi
-    echo
-    continue
- fi
-
- if [ x$DRIVER = "xipw2100" ] || [ x"`iwpriv $iface 2>/dev/null | grep set_crc_check`" != "x" ]
- then
-    printf "$iface\t\tIntel 2100B\tipw2100"
-    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-    then
-        cp $KISMET~ $KISMET 2>/dev/null &&
-        echo "source=ipw2100,$iface,Centrino_b" >>$KISMET
-        startStdIface $iface $CH
-    fi
-    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-    then
-        stopStdIface $iface
-    fi
-    echo
-    continue
- fi
-
-
- if [ x$DRIVER = "xarusb_lnx" ] || [ x$DRIVER = "Otus" ]
- then
-    printf "$iface\t\tAR9001USB\tOtus"
-    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-    then
-	echo "Monitor mode not yet supported"
-    fi
-    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-    then
-	stopStdIface $iface
-    fi
-    echo
-    continue
- fi  
-
- if [ x$DRIVER = "xWiLink" ]
- then
-    getChipset $iface
-    printf "$iface\t\t${CHIPSET}\t\t${DRIVER}"
-    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-    then 
-        printf "\n\t\t\t\tMonitor mode not yet supported"
-    fi  
-    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-    then 
-        stopStdIface $iface
-    fi  
-    echo
-    continue
- fi
-
- if [ x$DRIVER = "xipw2200" ] || [ x"`iwpriv $iface 2>/dev/null | grep sw_reset`" != "x" ]
- then
-    MODINFO=`modinfo ipw2200  2>/dev/null | awk '/^version/ {print $2}'`
-    if { echo "$MODINFO" | grep -E '^1\.0\.(0|1|2|3)$' ; }
-    then
-    	echo "Monitor mode not supported, please upgrade"
-    else
-	printf "$iface\t\tIntel 2200BG\tipw2200"
-	if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-	then
-	    cp $KISMET~ $KISMET 2>/dev/null &&
-	    echo "source=ipw2200,$iface,Centrino_g" >>$KISMET
-	    startStdIface $iface $CH
-	fi
-	if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-	then
-	    stopStdIface $iface
-	fi
-
-    	if { echo "$MODINFO" | grep -E '^1\.0\.(5|7|8|11)$' ; }
-	then
-		printf " (Warning: bad module version, you should upgrade)"
-	fi
-     fi
-     echo
-     continue
- fi
-
-
- if [ x$DRIVER = "xcx3110x" ] || [ x"`iwpriv $iface 2>/dev/null | grep set_backscan`" != "x" ]
- then
-     printf "$iface\t\tNokia 770\t\tcx3110x"
-     if [ x$1 = "xstart" ] || [ x$1 = "xstop" ]
-     then
-     	printf " (Enable/disable monitor mode not yet supported)"
-     fi
-     echo
-     continue
- fi
-
-
- if [ x$DRIVER = "xipw3945" ] || [ x"`iwpriv $iface 2>/dev/null | grep set_preamble | grep -v set_crc_check`" != "x" ]
-  then
-        printf "$iface\t\tIntel 3945ABG\tipw3945"
-        if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-         then
-                cp $KISMET~ $KISMET 2>/dev/null &&
-                echo "source=ipw3945,$iface,Centrino_g" >>$KISMET
-                startStdIface $iface $CH
-        fi
-        if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-         then
-                stopStdIface $iface
-        fi
-        echo
-        continue
- fi
-
-
- if [ x"`iwpriv $iface 2>/dev/null | grep inact_auth`" != "x" ]
- then
-     if [ -e "/proc/sys/net/$iface/%parent" ]
-     then
-        printf "$iface\t\tAtheros\t\tmadwifi-ng VAP (parent: `cat /proc/sys/net/$iface/%parent`)"
-	if [ x$2 = x$iface ] && [ x$1 = "xstop" ]
-	then
-		wlanconfig $iface destroy
-		printf " (VAP destroyed)"
-	fi
-	if [ x$1 = "xstart" ]
-	then
-		if [ $iface = "$IFACE" ]
-		then
-			printf " (monitor mode enabled)"
-		fi
-		if [ x$2 = x$iface ]
-		then
-			printf " (VAP cannot be put in monitor mode)"
-		fi
-	fi
-
-	echo ""
-        continue
-
-     fi
-     printf "$iface\t\tAtheros\t\tmadwifi"
-     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-     then
-         cp $KISMET~ $KISMET 2>/dev/null &&
-         echo "source=madwifi_g,$iface,Atheros" >>$KISMET
-         startStdIface $iface $CH
-     fi
-     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-     then
-         stopStdIface $iface
-     fi
-     echo
-     continue
- fi
-
-
- if [ x$DRIVER = "xprism54" ] || [ x"`iwpriv $iface 2>/dev/null | grep getPolicy`" != "x" ]
- then
-     printf "$iface\t\tPrismGT\t\tprism54"
-     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-     then
-         cp $KISMET~ $KISMET 2>/dev/null &&
-         echo "source=prism54g,$iface,Prism54" >>$KISMET
-         ifconfig $iface up
-         if [ $CH -lt 1000 ]
-         then
-             iwconfig $iface mode Monitor channel $CH
-         else
-             iwconfig $iface mode Monitor freq "$CH"000000
-         fi
-         iwpriv $iface set_prismhdr 1 >/dev/null 2>&1
-         printf " (monitor mode enabled)"
-     fi
-     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-     then
-         stopStdIface $iface
-     fi
-     echo
-     continue
- fi
-
-
- if [ x$DRIVER = "xhostap" ] || [ x"`iwpriv $iface 2>/dev/null | grep antsel_rx`" != "x" ]
- then
-     printf "$iface\t\tPrism 2/2.5/3\tHostAP"
-     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-     then
-         cp $KISMET~ $KISMET 2>/dev/null &&
-         echo "source=hostap,$iface,Prism2" >>$KISMET
-         if [ $CH -lt 1000 ]
-         then
-             iwconfig $iface mode Monitor channel $CH
-         else
-             iwconfig $iface mode Monitor freq "$CH"000000
-         fi
-         iwpriv $iface monitor_type 1 >/dev/null 2>&1
-         ifconfig $iface up
-         printf " (monitor mode enabled)"
-     fi
-     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-     then
-         stopStdIface $iface
-     fi
-     echo
-     continue
- fi
-
-
- if [ x$DRIVER = "xwlan-ng" ] || [ x"`wlancfg show $iface 2>/dev/null | grep p2CnfWEPFlags`" != "x" ]
- then
-     printf "$iface\t\tPrism 2/2.5/3\twlan-ng"
-     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-     then
-         cp $KISMET~ $KISMET 2>/dev/null &&
-         echo "source=wlanng,$iface,Prism2" >>$KISMET
-         wlanctl-ng $iface lnxreq_ifstate ifstate=enable >/dev/null
-         wlanctl-ng $iface lnxreq_wlansniff enable=true channel=$CH \
-                           prismheader=true wlanheader=false \
-                           stripfcs=true keepwepflags=true >/dev/null
-         echo p2CnfWEPFlags=0,4,7 | wlancfg set $iface
-         ifconfig $iface up
-         printf " (monitor mode enabled)"
-     fi
-     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-     then
-         ifconfig $iface down
-         wlanctl-ng $iface lnxreq_wlansniff enable=false  >/dev/null
-         wlanctl-ng $iface lnxreq_ifstate ifstate=disable >/dev/null
-         printf " (monitor mode disabled)"
-     fi
-     echo
-     continue
- fi
-
-
- if [ x$SYSFS = "x" ] && [ x"`iwpriv $iface 2>/dev/null | grep get_RaAP_Cfg`" != "x" ]
- then
-    if [ x"`iwconfig $iface | grep ESSID | awk -F\  '{ print $2}' | grep -i rt61`" != "x" ]
-    then
-    	printf "$iface\t\tRalink 2561 PCI\trt61"
-    fi
-
-    if [ x"`iwconfig $iface | grep ESSID | awk -F\  '{ print $2}' | grep -i rt73`" != "x" ]
-    then
-        printf "$iface\t\tRalink 2573 USB\trt73"
-    fi
-
-    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-    then
-         startStdIface $iface $CH
-         iwpriv $iface rfmontx 1
-         if [ x"`iwpriv $iface 2>/dev/null | grep forceprismheader`" != "x" ]
-         then
-             iwpriv $iface forceprismheader 1
-         fi
-         if [ x"`iwpriv $iface 2>/dev/null | grep forceprism`" != "x" ]
-         then
-             iwpriv $iface forceprism 1
-         fi
-    fi
-    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-     then
-     	stopStdIface $iface
-    fi
-    echo
-    continue
-
- fi
-
-
- if [ x$DRIVER = "xrt61" ]
- then
-    printf "$iface\t\tRalink 2561 PCI\trt61"
-
-    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-    then
-         startStdIface $iface $CH
-         iwpriv $iface rfmontx 1
-         if [ x"`iwpriv $iface 2>/dev/null | grep forceprismheader`" != "x" ]
-         then
-             iwpriv $iface forceprismheader 1
-         fi
-         if [ x"`iwpriv $iface 2>/dev/null | grep forceprism`" != "x" ]
-         then
-             iwpriv $iface forceprism 1
-         fi
-    fi
-    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-     then
-     	stopStdIface $iface
-    fi    
-    echo
-    continue
-
- fi
-
-
- if [ x$DRIVER = "xrt73" ]
- then
-    printf "$iface\t\tRalink 2573 USB\trt73"
-
-    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-    then
-         startStdIface $iface $CH
-         iwpriv $iface rfmontx 1
-         if [ x"`iwpriv $iface 2>/dev/null | grep forceprismheader`" != "x" ]
-         then
-             iwpriv $iface forceprismheader 1
-         fi
-         if [ x"`iwpriv $iface 2>/dev/null | grep forceprism`" != "x" ]
-         then
-             iwpriv $iface forceprism 1
-         fi
-    fi
-    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-     then
-     	stopStdIface $iface
-    fi    
-    echo
-    continue
-
- fi
-
-
- if [ x$DRIVER = "xrt2500" ] || [ x"`iwpriv $iface 2>/dev/null | grep bbp`" != "x" ]
- then
-     printf "$iface\t\tRalink 2560 PCI\trt2500"
-     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-     then
-         cp $KISMET~ $KISMET 2>/dev/null &&
-         echo "source=rt2500,$iface,Ralink_g" >>$KISMET
-         iwconfig $iface mode ad-hoc 2> /dev/null >/dev/null
-         startStdIface $iface $CH
-     fi
-     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-     then
-         stopStdIface $iface
-     fi
-     echo
-     continue
- fi
-
-
- if [ x$DRIVER = "xrt2570" ] || [ x"`iwpriv $iface 2>/dev/null | grep wpapsk`" != "x" ] && [ x"`iwpriv $iface 2>/dev/null | grep get_RaAP_Cfg`" = "x" ]
- then
-     printf "$iface\t\tRalink 2570 USB\trt2570"
-     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-     then
-         cp $KISMET~ $KISMET 2>/dev/null &&
-         echo "source=rt2500,$iface,Ralink_g" >>$KISMET
-         iwconfig $iface mode ad-hoc 2> /dev/null >/dev/null
-         startStdIface $iface $CH
-         if [ x"`iwpriv $iface 2>/dev/null | grep forceprismheader`" != "x" ]
-         then
-             iwpriv $iface forceprismheader 1
-         fi
-         if [ x"`iwpriv $iface 2>/dev/null | grep forceprism`" != "x" ]
-         then
-             iwpriv $iface forceprism 1
-         fi
-     fi
-     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-     then
-         stopStdIface $iface
-     fi
-     echo
-     continue
- fi
-
-
- if [ x$DRIVER = "xr8180" ] || [ x"`iwpriv $iface 2>/dev/null | grep debugtx`" != "x" ]
- then
-     printf "$iface\t\tRTL8180/RTL8185\tr8180"
-     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-     then
-         cp $KISMET~ $KISMET 2>/dev/null &&
-         echo "source=rt8180,$iface,Realtek" >>$KISMET
-         if [ $CH -lt 1000 ]
-         then
-             iwconfig $iface mode Monitor channel $CH
-         else
-             iwconfig $iface mode Monitor freq "$CH"000000
-         fi
-         if [ x"`iwpriv $iface 2>/dev/null | grep prismhdr`" != "x" ]
-         then
-            iwpriv $iface prismhdr 1 >/dev/null 2>&1
-         fi
-         ifconfig $iface up
-         printf " (monitor mode enabled)"
-     fi
-     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-     then
-         stopStdIface $iface
-     fi
-     echo
-     continue
- fi
-
-
- if [ x$DRIVER = "xr8187" ] || [ x"`iwpriv $iface 2>/dev/null | grep badcrc`" != "x" ]
- then
-     printf "$iface\t\tRTL8187\t\tr8187"
-     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-     then
-         cp $KISMET~ $KISMET 2>/dev/null &&
-         echo "source=rt8180,$iface,Realtek" >>$KISMET
-         if [ $CH -lt 1000 ]
-         then
-             iwconfig $iface mode Monitor channel $CH
-         else
-             iwconfig $iface mode Monitor freq "$CH"000000
-         fi
-         if [ x"`iwpriv $iface 2>/dev/null | grep rawtx`" != "x" ]
-         then
-             iwpriv $iface rawtx 1 >/dev/null 2>&1
-         fi
-         ifconfig $iface up
-         printf " (monitor mode enabled)"
-     fi
-     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-     then
-         stopStdIface $iface
-     fi
-     echo
-     continue
- fi
-
-
- if [ x$DRIVER = "xzd1211rw" ] || [ x"`iwpriv $iface 2>/dev/null | grep get_regdomain`" != "x" ]
- then
-     printf "$iface\t\tZyDAS 1211\tzd1211rw"
-     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-     then
-         cp $KISMET~ $KISMET 2>/dev/null &&
-         echo "source=zd1211,$iface,ZyDAS" >>$KISMET
-         startStdIface $iface $CH
-     fi
-     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-     then
-         stopStdIface $iface
-     fi
-     echo
-     continue
- fi
-
-
- if [ x$DRIVER = "xzd1211" ] || [ x"`iwpriv $iface 2>/dev/null | grep dbg_flag`" != "x" ]
- then
-     printf "$iface\t\tZyDAS 1211\tzd1211"
-     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-     then
-         cp $KISMET~ $KISMET 2>/dev/null &&
-         echo "source=zd1211,$iface,ZyDAS" >>$KISMET
-         startStdIface $iface $CH
-     fi
-     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-     then
-         stopStdIface $iface
-     fi
-     echo
-     continue
- fi
-
-
- if [ x$DRIVER = "xacx" ] || [ x"`iwpriv $iface 2>/dev/null | grep GetAcx1`" != "x" ]
- then
-     printf "$iface\t\tTI ACX1xx\tacx"
-     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-     then
-         cp $KISMET~ $KISMET 2>/dev/null &&
-         echo "source=acx100,$iface,TI" >>$KISMET
-         iwpriv $iface monitor 2 $CH 2> /dev/null >/dev/null
-         startStdIface $iface $CH
-     fi
-     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-     then
-         stopStdIface $iface
-     fi
-     echo
-     continue
- fi
-
-
- if [ x$DRIVER = "xbcm43xx" ] || [ x"`iwpriv $iface 2>/dev/null | grep write_sprom`" != "x" ]
- then
-     printf "$iface\t\tBroadcom\tbcm43xx"
-     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-     then
-         cp $KISMET~ $KISMET 2>/dev/null &&
-         echo "source=bcm43xx,$iface,broadcom" >>$KISMET
-         startStdIface $iface $CH
-     fi
-     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-     then
-         stopStdIface $iface
-         ifconfig $iface up
-     fi
-     echo
-     continue
- fi
-
-
- if [ x$DRIVER = "xislsm" ] || [ x"`iwpriv $iface 2>/dev/null | grep set_announcedpkt`" != "x" ]
- then
-    printf "$iface\t\tPrismGT\t\tislsm"
-    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-    then
-         startStdIface $iface $CH
-    fi
-    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-     then
-     	stopStdIface $iface
-    fi    
-    echo
-    continue
-
- fi
-
-
- if [ x$DRIVER = "xat76c503a" ] || [ x"`iwpriv $iface 2>/dev/null | grep set_announcedpkt`" != "x" ]
-  then
-     printf "$iface\t\tAtmel\t\tat76c503a"
-     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-     then
-          startStdIface $iface $CH
-     fi
-     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-      then
-      	 stopStdIface $iface
-     fi     
-     echo
-     continue
-
- fi
-
-
- if [ x$DRIVER = "xndiswrapper" ] || [ x"`iwpriv $iface 2>/dev/null | grep ndis_reset`" != "x" ]
- then
-     printf "$iface\t\tUnknown\t\tndiswrapper"
-     if [ x$2 = x$iface ]
-     then
-         echo " (MONITOR MODE NOT SUPPORTED)"
-     fi
-     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-     then
-         stopStdIface $iface
-     fi
-     echo
-     continue
- fi
-
-
- if [ x$DRIVER != "x" ]
- then
-     if [ x$CHIPSET = "x" ]
-     then
-         printf "$iface\t\tUNKNOWN\t\t$DRIVER"
-     else
-         printf "$iface\t\t$CHIPSET\t\t$DRIVER"
-     fi
-
-     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
-     then
-         startStdIface $iface $CH
-     fi
-     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
-     then
-         stopStdIface $iface
-     fi
-     echo
-     continue
- fi
-
-printf "$iface\t\tUnknown\t\tUnknown (MONITOR MODE NOT SUPPORTED)\n"
-
-done
-
-################################ < STOP > #########################