fosscad-repo-frozen/Firearms/The_Howard_Pistol-RollaTroll/README.md

# The Howard Pistol

#### Description
The Howard  Pistol (after ex Australian PM, John Howard) by RollaTroll. Designed for 9<>19mm Parabellum. Although similar to the Sacramento, it is mostly based off of The Experiment, an earlier design of mine. Thanks to the Sacramento for the links to mcmaster.com, making it so much easier to design, taking about 2 weeks in total, including initial sketches.

#### Assembly
Follow [video instruction](https://www.youtube.com/watch?v=SxwdMOVvLeg) if need be. Otherwise, make it a challenge and try to work it out yourself.

##### You will need to print:

* 1 X Grip
* 3 X Grip Rod
* 1 X Frame and Trigger Block
* 2 X Trigger Rod
* 1 X Trigger Guard
* 1 X Back Plate
* 5 X Frame Rod
* 1 X Top
* 2 X Side
* 1 X Bottom Cover Left
* 1 X Bottom Cover Right
* 1 X Nail Block
* 1 X Barrel
* 1 X Bolt
* 1 X Nail Sabot
* 2 X Bolt Rod Front
* 1 X Bolt Rod Rear

##### You will need to obtain

* 1 X 2D Size Nail http://www.mcmaster.com/#97946a100/=ok0bb4
* 1 X 10.5 mm Metric Compression Spring http://www.mcmaster.com/#94125k414/=ok0bil
* 1 X 90.5 mm Metric Compression Spring http://www.mcmaster.com/#94125k177/=ok0c26

#### Disclaimer
I am not liable for any damage caused by the use of this design. If you find any problems in the design, contact me and I'll try to fix it.