Adding Revenant Pistol version 1.1 (first release) by Proteus.

Firearms/Revenant_Pistol_v1.1-Proteus/README.md

@@ -0,0 +1,46 @@
+# REVENANT
+Fosscad
+#### Author
+Proteus
+
+#### Version
+1.1 (FIRST RELEASE)
+
+#### Changelog
+* Added sights
+* Angled ridge
+
+#### Caliber
+.22LR
+
+#### Description
+This pistol is designed to be lightweight, small, and easy to print without taking too much time. It currently weighs around 150g
+fully assembled without ammunition, excluding the 3.7oz of steel required for the U.S.
+
+#### Assembly
+Print out Striker, Trigger, Barrel at 100% infill with no supports. Give the barrel acetone vapor treatment.
+Print out Frame_L and Frame_R with supports, flat at 100% infill.
+Print out three Pins, 100% infill. 
+Obtain a nail of suitable size and a spring for the striker.
+Lay Frame_L on side, insert nail into firing pin. Ensure it does not stick out too much. Insert spring
+around the guide post on the back of Frame_R. Place striker in Frame_R, ensure it slides correctly and catches on the ridge.
+Attach Trigger to Frame_L with one of your Pins. Insert Barrel into slot on Frame_L. Load Barrel at this time. Place Frame_R
+over Frame_L (You may want to transfer the striker to Frame_L now that you have tested the spring), and insert the other two
+Pins. 
+
+#### To Fire
+Pull the lever sticking out of the Striker all the way back and then press down so it catches on the groove. WARNING:
+If you release it without pressing down the gun will fire. Ensure that the striker is caught on the ridge before releasing.
+
+When ready to fire, pull the trigger. It will push the striker up above the angled ridge and send it into the firing pin.
+
+#### SAFETY WARNING
+DO NOT PULL BACK THE STRIKER/CATCH IT ON THE RIDGE UNTIL YOU ARE READY TO SHOOT. IT IS EXTREMELY EASY TO ACCIDENTALLY FIRE AT 
+THIS STAGE, SO DO NOT DO IT UNTIL YOU ARE READY. If you keep the striker up against the firing pin it is safe and will not accidentally fire.
+
+For first test fire, do it remotely by pulling the trigger with a string. This will lower risk of injury.
+
+#### Disclaimer
+Follow all local laws. For U.S. residents a non-removable 3.7oz piece of steel must be added. Be aware of your local and federal
+laws before assembling. In the state of CA this weapon is illegal as it is a "zipgun". For other states please check your laws.
+

Firearms/Revenant_Pistol_v1.1-Proteus/STEP/pin.step

@@ -0,0 +1,270 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('pin.STEP',
+    '2014-01-22T21:35:13',
+    ( '' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.6899999999999998400, 0.0000000000000000000 ) ) ;
+#2 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#3 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#4 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#5 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#6 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #182 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #185, #2, #99 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#7 = ORIENTED_EDGE ( 'NONE', *, *, #101, .T. ) ;
+#8 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #51 ) ) ;
+#9 = VECTOR ( 'NONE', #34, 39.37007874015748100 ) ;
+#10 = EDGE_CURVE ( 'NONE', #166, #30, #183, .T. ) ;
+#11 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 1.224646799147353200E-016 ) ) ;
+#12 = EDGE_LOOP ( 'NONE', ( #44, #91, #36, #81 ) ) ;
+#13 = CLOSED_SHELL ( 'NONE', ( #93, #55, #112, #77, #237, #19, #90, #202 ) ) ;
+#14 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.6999999999999999600, -0.07499999999999998300 ) ) ;
+#15 =( CONVERSION_BASED_UNIT ( 'INCH', #109 ) LENGTH_UNIT ( ) NAMED_UNIT ( #5 ) );
+#16 = ORIENTED_EDGE ( 'NONE', *, *, #46, .T. ) ;
+#17 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#18 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#19 = ADVANCED_FACE ( 'NONE', ( #218 ), #67, .F. ) ;
+#20 = SURFACE_SIDE_STYLE ('',( #165 ) ) ;
+#21 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #135 ) ;
+#22 = ORIENTED_EDGE ( 'NONE', *, *, #70, .T. ) ;
+#23 =( CONVERSION_BASED_UNIT ( 'INCH', #194 ) LENGTH_UNIT ( ) NAMED_UNIT ( #163 ) );
+#24 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#25 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #136 );
+#26 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.6999999999999999600, 0.0000000000000000000 ) ) ;
+#27 = VERTEX_POINT ( 'NONE', #150 ) ;
+#28 = FACE_OUTER_BOUND ( 'NONE', #222, .T. ) ;
+#29 = EDGE_CURVE ( 'NONE', #228, #30, #214, .T. ) ;
+#30 = VERTEX_POINT ( 'NONE', #49 ) ;
+#31 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.01000000000000003000, 0.0000000000000000000 ) ) ;
+#32 = ORIENTED_EDGE ( 'NONE', *, *, #122, .T. ) ;
+#33 = ORIENTED_EDGE ( 'NONE', *, *, #10, .T. ) ;
+#34 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#35 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#36 = ORIENTED_EDGE ( 'NONE', *, *, #206, .F. ) ;
+#37 = AXIS2_PLACEMENT_3D ( 'NONE', #219, #236, #216 ) ;
+#38 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.6999999999999999600, 0.0000000000000000000 ) ) ;
+#39 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#40 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#41 = EDGE_LOOP ( 'NONE', ( #160, #33, #248, #198 ) ) ;
+#42 = FILL_AREA_STYLE ('',( #114 ) ) ;
+#43 = CIRCLE ( 'NONE', #157, 0.07499999999999998300 ) ;
+#44 = ORIENTED_EDGE ( 'NONE', *, *, #46, .F. ) ;
+#45 = AXIS2_PLACEMENT_3D ( 'NONE', #149, #105, #229 ) ;
+#46 = EDGE_CURVE ( 'NONE', #27, #228, #73, .T. ) ;
+#47 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #15, 'distance_accuracy_value', 'NONE');
+#48 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#49 = CARTESIAN_POINT ( 'NONE',  ( 9.184850993605147200E-018, 0.01000000000000003000, 0.07499999999999998300 ) ) ;
+#50 = FILL_AREA_STYLE ('',( #233 ) ) ;
+#51 = STYLED_ITEM ( 'NONE', ( #84 ), #208 ) ;
+#52 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 1.224646799147353200E-016 ) ) ;
+#53 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#54 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#55 = ADVANCED_FACE ( 'NONE', ( #173 ), #203, .T. ) ;
+#56 = TOROIDAL_SURFACE ( 'NONE', #37, 0.06499999999999998800, 0.01000000000000000000 ) ;
+#57 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#58 = AXIS2_PLACEMENT_3D ( 'NONE', #176, #201, #69 ) ;
+#59 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.6899999999999998400, 0.06499999999999998800 ) ) ;
+#60 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#61 = SURFACE_STYLE_USAGE ( .BOTH. , #79 ) ;
+#62 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #47 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #15, #107, #252 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#63 = COLOUR_RGB ( '',1.000000000000000000, 0.9333333333333333500, 0.1333333333333333300 ) ;
+#64 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#65 = TOROIDAL_SURFACE ( 'NONE', #213, 0.06499999999999998800, 0.01000000000000000000 ) ;
+#66 = STYLED_ITEM ( 'NONE', ( #190 ), #118 ) ;
+#67 = PLANE ( 'NONE',  #83 ) ;
+#68 = DIRECTION ( 'NONE',  ( 1.224646799147353900E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#69 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#70 = EDGE_CURVE ( 'NONE', #87, #100, #119, .T. ) ;
+#71 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#72 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#73 = CIRCLE ( 'NONE', #131, 0.06499999999999998800 ) ;
+#74 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#75 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#76 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#77 = ADVANCED_FACE ( 'NONE', ( #78 ), #125, .T. ) ;
+#78 = FACE_OUTER_BOUND ( 'NONE', #205, .T. ) ;
+#79 = SURFACE_SIDE_STYLE ('',( #140 ) ) ;
+#80 = ORIENTED_EDGE ( 'NONE', *, *, #101, .F. ) ;
+#81 = ORIENTED_EDGE ( 'NONE', *, *, #29, .F. ) ;
+#82 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #51 ), #6 ) ;
+#83 = AXIS2_PLACEMENT_3D ( 'NONE', #48, #64, #106 ) ;
+#84 = PRESENTATION_STYLE_ASSIGNMENT (( #61 ) ) ;
+#85 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #23, 'distance_accuracy_value', 'NONE');
+#86 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#87 = VERTEX_POINT ( 'NONE', #196 ) ;
+#88 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#89 = EDGE_CURVE ( 'NONE', #87, #166, #225, .T. ) ;
+#90 = ADVANCED_FACE ( 'NONE', ( #156 ), #65, .T. ) ;
+#91 = ORIENTED_EDGE ( 'NONE', *, *, #169, .T. ) ;
+#92 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#93 = ADVANCED_FACE ( 'NONE', ( #28 ), #56, .T. ) ;
+#94 = ORIENTED_EDGE ( 'NONE', *, *, #141, .F. ) ;
+#95 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#96 = TOROIDAL_SURFACE ( 'NONE', #58, 0.06499999999999998800, 0.01000000000000000000 ) ;
+#97 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #85 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #23, #240, #40 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#98 = ORIENTED_EDGE ( 'NONE', *, *, #212, .F. ) ;
+#99 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#100 = VERTEX_POINT ( 'NONE', #108 ) ;
+#101 = EDGE_CURVE ( 'NONE', #228, #27, #244, .T. ) ;
+#102 = ORIENTED_EDGE ( 'NONE', *, *, #117, .T. ) ;
+#103 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.6999999999999999600, 0.0000000000000000000 ) ) ;
+#104 = FACE_OUTER_BOUND ( 'NONE', #41, .T. ) ;
+#105 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#106 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#107 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#108 = CARTESIAN_POINT ( 'NONE',  ( 8.572527594031470400E-018, 0.6999999999999999600, -0.06499999999999998800 ) ) ;
+#109 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #110 );
+#110 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#111 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#112 = ADVANCED_FACE ( 'NONE', ( #104 ), #170, .T. ) ;
+#113 = CIRCLE ( 'NONE', #154, 0.06499999999999998800 ) ;
+#114 = FILL_AREA_STYLE_COLOUR ( '', #241 ) ;
+#115 = PRODUCT_CONTEXT ( 'NONE', #209, 'mechanical' ) ;
+#116 = SHAPE_DEFINITION_REPRESENTATION ( #120, #208 ) ;
+#117 = EDGE_CURVE ( 'NONE', #226, #100, #113, .T. ) ;
+#118 = MANIFOLD_SOLID_BREP ( 'Fillet1', #13 ) ;
+#119 = CIRCLE ( 'NONE', #126, 0.009999999999999995000 ) ;
+#120 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #174 ) ;
+#121 = EDGE_LOOP ( 'NONE', ( #7, #16 ) ) ;
+#122 = EDGE_CURVE ( 'NONE', #87, #129, #177, .T. ) ;
+#123 = CIRCLE ( 'NONE', #247, 0.009999999999999995000 ) ;
+#124 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#125 = CYLINDRICAL_SURFACE ( 'NONE', #210, 0.07499999999999998300 ) ;
+#126 = AXIS2_PLACEMENT_3D ( 'NONE', #127, #11, #172 ) ;
+#127 = CARTESIAN_POINT ( 'NONE',  ( 7.960204194457793600E-018, 0.6899999999999998400, -0.06499999999999998800 ) ) ;
+#128 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#129 = VERTEX_POINT ( 'NONE', #253 ) ;
+#130 = CARTESIAN_POINT ( 'NONE',  ( 9.184850993605147200E-018, 0.6899999999999998400, 0.07499999999999998300 ) ) ;
+#131 = AXIS2_PLACEMENT_3D ( 'NONE', #175, #145, #215 ) ;
+#132 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#133 = CIRCLE ( 'NONE', #204, 0.06499999999999998800 ) ;
+#134 = ORIENTED_EDGE ( 'NONE', *, *, #10, .F. ) ;
+#135 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#136 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#137 = PLANE ( 'NONE',  #227 ) ;
+#138 = AXIS2_PLACEMENT_3D ( 'NONE', #251, #128, #18 ) ;
+#139 = ORIENTED_EDGE ( 'NONE', *, *, #223, .F. ) ;
+#140 = SURFACE_STYLE_FILL_AREA ( #42 ) ;
+#141 = EDGE_CURVE ( 'NONE', #100, #226, #133, .T. ) ;
+#142 = VECTOR ( 'NONE', #179, 39.37007874015748100 ) ;
+#143 = ORIENTED_EDGE ( 'NONE', *, *, #141, .T. ) ;
+#144 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #66 ) ) ;
+#145 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#146 = CIRCLE ( 'NONE', #250, 0.07499999999999998300 ) ;
+#147 = ORIENTED_EDGE ( 'NONE', *, *, #29, .T. ) ;
+#148 = ORIENTED_EDGE ( 'NONE', *, *, #70, .F. ) ;
+#149 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.01000000000000003000, 0.06499999999999998800 ) ) ;
+#150 = CARTESIAN_POINT ( 'NONE',  ( 8.572527594031470400E-018, 0.0000000000000000000, -0.06499999999999998800 ) ) ;
+#151 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.01000000000000003000, 0.0000000000000000000 ) ) ;
+#152 = CARTESIAN_POINT ( 'NONE',  ( 9.184850993605147200E-018, 0.6999999999999999600, 0.07499999999999998300 ) ) ;
+#153 = FACE_OUTER_BOUND ( 'NONE', #168, .T. ) ;
+#154 = AXIS2_PLACEMENT_3D ( 'NONE', #38, #17, #72 ) ;
+#155 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.6999999999999999600, 0.06499999999999998800 ) ) ;
+#156 = FACE_OUTER_BOUND ( 'NONE', #231, .T. ) ;
+#157 = AXIS2_PLACEMENT_3D ( 'NONE', #159, #220, #161 ) ;
+#158 = AXIS2_PLACEMENT_3D ( 'NONE', #200, #52, #68 ) ;
+#159 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.6899999999999998400, 0.0000000000000000000 ) ) ;
+#160 = ORIENTED_EDGE ( 'NONE', *, *, #89, .T. ) ;
+#161 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#162 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#163 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#164 = AXIS2_PLACEMENT_3D ( 'NONE', #3, #75, #60 ) ;
+#165 = SURFACE_STYLE_FILL_AREA ( #50 ) ;
+#166 = VERTEX_POINT ( 'NONE', #130 ) ;
+#167 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #135, 'design' ) ;
+#168 = EDGE_LOOP ( 'NONE', ( #148, #139, #246, #94 ) ) ;
+#169 = EDGE_CURVE ( 'NONE', #27, #129, #189, .T. ) ;
+#170 = CYLINDRICAL_SURFACE ( 'NONE', #138, 0.07499999999999998300 ) ;
+#171 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#172 = DIRECTION ( 'NONE',  ( 1.224646799147353900E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#173 = FACE_OUTER_BOUND ( 'NONE', #12, .T. ) ;
+#174 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #186, #167 ) ;
+#175 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#176 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.6899999999999998400, 0.0000000000000000000 ) ) ;
+#177 = LINE ( 'NONE', #14, #142 ) ;
+#178 = AXIS2_PLACEMENT_3D ( 'NONE', #217, #35, #132 ) ;
+#179 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#180 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#181 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#182 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #185, 'distance_accuracy_value', 'NONE');
+#183 = LINE ( 'NONE', #152, #9 ) ;
+#184 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.01000000000000003000, 0.0000000000000000000 ) ) ;
+#185 =( CONVERSION_BASED_UNIT ( 'INCH', #25 ) LENGTH_UNIT ( ) NAMED_UNIT ( #74 ) );
+#186 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #221, .NOT_KNOWN. ) ;
+#187 = ORIENTED_EDGE ( 'NONE', *, *, #169, .F. ) ;
+#188 = AXIS2_PLACEMENT_3D ( 'NONE', #71, #53, #239 ) ;
+#189 = CIRCLE ( 'NONE', #158, 0.009999999999999995000 ) ;
+#190 = PRESENTATION_STYLE_ASSIGNMENT (( #235 ) ) ;
+#191 = AXIS2_PLACEMENT_3D ( 'NONE', #1, #39, #181 ) ;
+#192 = ORIENTED_EDGE ( 'NONE', *, *, #193, .T. ) ;
+#193 = EDGE_CURVE ( 'NONE', #129, #30, #207, .T. ) ;
+#194 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #57 );
+#195 = ORIENTED_EDGE ( 'NONE', *, *, #89, .F. ) ;
+#196 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.6899999999999998400, -0.07499999999999998300 ) ) ;
+#197 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #221 ) ) ;
+#198 = ORIENTED_EDGE ( 'NONE', *, *, #122, .F. ) ;
+#199 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.6999999999999999600, 0.0000000000000000000 ) ) ;
+#200 = CARTESIAN_POINT ( 'NONE',  ( 7.960204194457793600E-018, 0.01000000000000003000, -0.06499999999999998800 ) ) ;
+#201 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#202 = ADVANCED_FACE ( 'NONE', ( #153 ), #96, .T. ) ;
+#203 = TOROIDAL_SURFACE ( 'NONE', #211, 0.06499999999999998800, 0.01000000000000000000 ) ;
+#204 = AXIS2_PLACEMENT_3D ( 'NONE', #199, #180, #88 ) ;
+#205 = EDGE_LOOP ( 'NONE', ( #134, #234, #32, #192 ) ) ;
+#206 = EDGE_CURVE ( 'NONE', #30, #129, #146, .T. ) ;
+#207 = CIRCLE ( 'NONE', #178, 0.07499999999999998300 ) ;
+#208 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'pin', ( #118, #164 ), #97 ) ;
+#209 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#210 = AXIS2_PLACEMENT_3D ( 'NONE', #103, #124, #86 ) ;
+#211 = AXIS2_PLACEMENT_3D ( 'NONE', #31, #249, #171 ) ;
+#212 = EDGE_CURVE ( 'NONE', #166, #226, #123, .T. ) ;
+#213 = AXIS2_PLACEMENT_3D ( 'NONE', #151, #95, #92 ) ;
+#214 = CIRCLE ( 'NONE', #45, 0.009999999999999995000 ) ;
+#215 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#216 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#217 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.01000000000000003000, 0.0000000000000000000 ) ) ;
+#218 = FACE_OUTER_BOUND ( 'NONE', #121, .T. ) ;
+#219 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.6899999999999998400, 0.0000000000000000000 ) ) ;
+#220 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#221 = PRODUCT ( 'pin', 'pin', '', ( #115 ) ) ;
+#222 = EDGE_LOOP ( 'NONE', ( #195, #22, #238, #98 ) ) ;
+#223 = EDGE_CURVE ( 'NONE', #166, #87, #43, .T. ) ;
+#224 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.06499999999999998800 ) ) ;
+#225 = CIRCLE ( 'NONE', #191, 0.07499999999999998300 ) ;
+#226 = VERTEX_POINT ( 'NONE', #155 ) ;
+#227 = AXIS2_PLACEMENT_3D ( 'NONE', #26, #54, #111 ) ;
+#228 = VERTEX_POINT ( 'NONE', #224 ) ;
+#229 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#230 = ORIENTED_EDGE ( 'NONE', *, *, #193, .F. ) ;
+#231 = EDGE_LOOP ( 'NONE', ( #187, #80, #147, #230 ) ) ;
+#232 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #66 ), #62 ) ;
+#233 = FILL_AREA_STYLE_COLOUR ( '', #63 ) ;
+#234 = ORIENTED_EDGE ( 'NONE', *, *, #223, .T. ) ;
+#235 = SURFACE_STYLE_USAGE ( .BOTH. , #20 ) ;
+#236 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#237 = ADVANCED_FACE ( 'NONE', ( #245 ), #137, .T. ) ;
+#238 = ORIENTED_EDGE ( 'NONE', *, *, #117, .F. ) ;
+#239 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#240 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#241 = COLOUR_RGB ( '',1.000000000000000000, 0.9333333333333333500, 0.1333333333333333300 ) ;
+#242 = EDGE_LOOP ( 'NONE', ( #102, #143 ) ) ;
+#243 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #209 ) ;
+#244 = CIRCLE ( 'NONE', #188, 0.06499999999999998800 ) ;
+#245 = FACE_OUTER_BOUND ( 'NONE', #242, .T. ) ;
+#246 = ORIENTED_EDGE ( 'NONE', *, *, #212, .T. ) ;
+#247 = AXIS2_PLACEMENT_3D ( 'NONE', #59, #162, #76 ) ;
+#248 = ORIENTED_EDGE ( 'NONE', *, *, #206, .T. ) ;
+#249 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#250 = AXIS2_PLACEMENT_3D ( 'NONE', #184, #4, #24 ) ;
+#251 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.6999999999999999600, 0.0000000000000000000 ) ) ;
+#252 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#253 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.01000000000000003000, -0.07499999999999998300 ) ) ;
+ENDSEC;
+END-ISO-10303-21;

Firearms/Revenant_Pistol_v1.1-Proteus/STEP/striker.step

@@ -0,0 +1,677 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('striker.STEP',
+    '2014-01-22T21:34:01',
+    ( '' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = EDGE_LOOP ( 'NONE', ( #43, #479, #325, #546, #163, #430 ) ) ;
+#2 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.7299999999999998700, -0.1000000000000000100 ) ) ;
+#3 = CARTESIAN_POINT ( 'NONE',  ( 0.7059469495372516800, 0.2649999999999997900, 0.2902209243125893300 ) ) ;
+#4 = LINE ( 'NONE', #45, #583 ) ;
+#5 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#6 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#7 = CARTESIAN_POINT ( 'NONE',  ( 0.7798945267431974800, 0.2649999999999997900, -0.07584937629939572700 ) ) ;
+#8 = VERTEX_POINT ( 'NONE', #193 ) ;
+#9 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, 0.7092893218813450800, 0.8458578643762688600 ) ) ;
+#10 = VERTEX_POINT ( 'NONE', #232 ) ;
+#11 = AXIS2_PLACEMENT_3D ( 'NONE', #580, #242, #36 ) ;
+#12 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#13 = LINE ( 'NONE', #641, #134 ) ;
+#14 = LINE ( 'NONE', #262, #396 ) ;
+#15 = ORIENTED_EDGE ( 'NONE', *, *, #19, .F. ) ;
+#16 = CARTESIAN_POINT ( 'NONE',  ( 0.7999999999999999300, 0.4649999999999998000, 0.2562500000000001400 ) ) ;
+#17 = ORIENTED_EDGE ( 'NONE', *, *, #584, .T. ) ;
+#18 = ORIENTED_EDGE ( 'NONE', *, *, #75, .T. ) ;
+#19 = EDGE_CURVE ( 'NONE', #510, #266, #509, .T. ) ;
+#20 = LINE ( 'NONE', #117, #449 ) ;
+#21 = EDGE_CURVE ( 'NONE', #350, #99, #229, .T. ) ;
+#22 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, 0.4678877179719978500, 0.8399999999999999700 ) ) ;
+#23 = ORIENTED_EDGE ( 'NONE', *, *, #62, .T. ) ;
+#24 = CYLINDRICAL_SURFACE ( 'NONE', #239, 0.05000000000000001000 ) ;
+#25 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#26 = VERTEX_POINT ( 'NONE', #137 ) ;
+#27 =( BOUNDED_CURVE ( )  B_SPLINE_CURVE ( 3, ( #291, #336, #46, #95 ),
+ .UNSPECIFIED., .F., .F. ) 
+ B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
+ ( 3.141592653589793100, 4.712388980384689700 ),
+ .UNSPECIFIED. ) 
+ CURVE ( )  GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) 
+ REPRESENTATION_ITEM ( '' )  );
+#28 = AXIS2_PLACEMENT_3D ( 'NONE', #561, #12, #138 ) ;
+#29 = VERTEX_POINT ( 'NONE', #481 ) ;
+#30 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#31 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.8499999999999999800 ) ) ;
+#32 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #433 );
+#33 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#34 = CARTESIAN_POINT ( 'NONE',  ( 0.7798945267431974800, 0.4649999999999998000, -0.07584937629939572700 ) ) ;
+#35 = CARTESIAN_POINT ( 'NONE',  ( -0.6509901951359279300, 0.7299999999999998700, 0.8499999999999999800 ) ) ;
+#36 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#37 = ORIENTED_EDGE ( 'NONE', *, *, #503, .F. ) ;
+#38 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 3.073328992872299300E-015 ) ) ;
+#39 = VECTOR ( 'NONE', #184, 39.37007874015748100 ) ;
+#40 = CARTESIAN_POINT ( 'NONE',  ( -0.2500000000000000600, 0.7299999999999998700, 0.4000000000000000200 ) ) ;
+#41 = CIRCLE ( 'NONE', #70, 0.1000000000000000200 ) ;
+#42 = EDGE_CURVE ( 'NONE', #124, #579, #488, .T. ) ;
+#43 = ORIENTED_EDGE ( 'NONE', *, *, #92, .T. ) ;
+#44 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#45 = CARTESIAN_POINT ( 'NONE',  ( 0.7999999999999999300, 0.4649999999999998000, 0.1375000000000002300 ) ) ;
+#46 = CARTESIAN_POINT ( 'NONE',  ( -0.5999999999999999800, 0.7092893218813450800, 0.8458578643762688600 ) ) ;
+#47 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#48 = AXIS2_PLACEMENT_3D ( 'NONE', #484, #191, #497 ) ;
+#49 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#50 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#51 = EDGE_CURVE ( 'NONE', #467, #308, #501, .T. ) ;
+#52 = FACE_OUTER_BOUND ( 'NONE', #613, .T. ) ;
+#53 = ADVANCED_FACE ( 'NONE', ( #94 ), #374, .F. ) ;
+#54 = ORIENTED_EDGE ( 'NONE', *, *, #170, .F. ) ;
+#55 = ADVANCED_FACE ( 'NONE', ( #73 ), #238, .T. ) ;
+#56 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#57 = VECTOR ( 'NONE', #81, 39.37007874015748100 ) ;
+#58 = LINE ( 'NONE', #357, #611 ) ;
+#59 = ORIENTED_EDGE ( 'NONE', *, *, #638, .F. ) ;
+#60 = EDGE_LOOP ( 'NONE', ( #139, #526, #317, #557 ) ) ;
+#61 = ORIENTED_EDGE ( 'NONE', *, *, #296, .F. ) ;
+#62 = EDGE_CURVE ( 'NONE', #271, #114, #458, .T. ) ;
+#63 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#64 = EDGE_CURVE ( 'NONE', #10, #467, #633, .T. ) ;
+#65 = DIRECTION ( 'NONE',  ( 1.224646799147353000E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#66 = AXIS2_PLACEMENT_3D ( 'NONE', #528, #472, #289 ) ;
+#67 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#68 = VECTOR ( 'NONE', #38, 39.37007874015748100 ) ;
+#69 = EDGE_CURVE ( 'NONE', #419, #122, #518, .T. ) ;
+#70 = AXIS2_PLACEMENT_3D ( 'NONE', #166, #67, #219 ) ;
+#71 = LINE ( 'NONE', #564, #592 ) ;
+#72 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#73 = FACE_OUTER_BOUND ( 'NONE', #100, .T. ) ;
+#74 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#75 = EDGE_CURVE ( 'NONE', #579, #419, #198, .T. ) ;
+#76 = EDGE_LOOP ( 'NONE', ( #573, #414, #88, #202 ) ) ;
+#77 = ORIENTED_EDGE ( 'NONE', *, *, #51, .T. ) ;
+#78 = MANIFOLD_SOLID_BREP ( 'Fillet3', #522 ) ;
+#79 = CARTESIAN_POINT ( 'NONE',  ( 0.5767003399721217800, -4.460595552154893600E-016, 0.1374999999999987300 ) ) ;
+#80 = AXIS2_PLACEMENT_3D ( 'NONE', #452, #506, #215 ) ;
+#81 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#82 = FACE_OUTER_BOUND ( 'NONE', #60, .T. ) ;
+#83 = CARTESIAN_POINT ( 'NONE',  ( -0.2500000000000000600, 0.04999999999999996800, 0.8499999999999999800 ) ) ;
+#84 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #607, 'design' ) ;
+#85 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#86 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #383 ) ;
+#87 = AXIS2_PLACEMENT_3D ( 'NONE', #35, #425, #136 ) ;
+#88 = ORIENTED_EDGE ( 'NONE', *, *, #258, .T. ) ;
+#89 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#90 = LINE ( 'NONE', #370, #68 ) ;
+#91 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, 0.0000000000000000000, 0.8399999999999999700 ) ) ;
+#92 = EDGE_CURVE ( 'NONE', #495, #588, #314, .T. ) ;
+#93 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#94 = FACE_OUTER_BOUND ( 'NONE', #115, .T. ) ;
+#95 = CARTESIAN_POINT ( 'NONE',  ( -0.5999999999999999800, 0.6799999999999998300, 0.8399999999999999700 ) ) ;
+#96 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#97 = EDGE_CURVE ( 'NONE', #10, #26, #27, .T. ) ;
+#98 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, 0.4649999999999998000, 0.1375000000000002300 ) ) ;
+#99 = VERTEX_POINT ( 'NONE', #98 ) ;
+#100 = EDGE_LOOP ( 'NONE', ( #340, #250, #176, #494, #315, #278, #146, #201 ) ) ;
+#101 = ADVANCED_FACE ( 'NONE', ( #52, #524 ), #440, .T. ) ;
+#102 = FILL_AREA_STYLE ('',( #435 ) ) ;
+#103 = LINE ( 'NONE', #386, #345 ) ;
+#104 = ADVANCED_FACE ( 'NONE', ( #470 ), #456, .T. ) ;
+#105 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#106 = FILL_AREA_STYLE ('',( #399 ) ) ;
+#107 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #200, 'distance_accuracy_value', 'NONE');
+#108 = EDGE_LOOP ( 'NONE', ( #165, #321, #220, #382 ) ) ;
+#109 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#110 = EDGE_CURVE ( 'NONE', #460, #113, #196, .T. ) ;
+#111 = VERTEX_POINT ( 'NONE', #496 ) ;
+#112 = FACE_OUTER_BOUND ( 'NONE', #387, .T. ) ;
+#113 = VERTEX_POINT ( 'NONE', #388 ) ;
+#114 = VERTEX_POINT ( 'NONE', #591 ) ;
+#115 = EDGE_LOOP ( 'NONE', ( #37, #23, #59, #473 ) ) ;
+#116 = CARTESIAN_POINT ( 'NONE',  ( -0.5999999999999999800, -9.797174393178824900E-017, 0.8499999999999999800 ) ) ;
+#117 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -9.797174393178824900E-017, -0.1000000000000000100 ) ) ;
+#118 = VECTOR ( 'NONE', #554, 39.37007874015748100 ) ;
+#119 = LINE ( 'NONE', #213, #631 ) ;
+#120 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, 0.6799999999999998300, -0.1000000000000000100 ) ) ;
+#121 = AXIS2_PLACEMENT_3D ( 'NONE', #346, #56, #109 ) ;
+#122 = VERTEX_POINT ( 'NONE', #300 ) ;
+#123 = CARTESIAN_POINT ( 'NONE',  ( 0.7999999999999999300, 0.2649999999999997900, 0.2562500000000001400 ) ) ;
+#124 = VERTEX_POINT ( 'NONE', #203 ) ;
+#125 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #400 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #599, #161, #267 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#126 = CIRCLE ( 'NONE', #253, 0.1000000000000000200 ) ;
+#127 = ORIENTED_EDGE ( 'NONE', *, *, #529, .F. ) ;
+#128 = CARTESIAN_POINT ( 'NONE',  ( 0.7059469495372516800, -8.741274243243079300E-016, 0.2902209243125893300 ) ) ;
+#129 = EDGE_CURVE ( 'NONE', #588, #460, #618, .T. ) ;
+#130 = CARTESIAN_POINT ( 'NONE',  ( -0.5999999999999999800, 0.4242987285365911200, 0.8499999999999999800 ) ) ;
+#131 = EDGE_LOOP ( 'NONE', ( #61, #615, #401, #513 ) ) ;
+#132 = ORIENTED_EDGE ( 'NONE', *, *, #567, .F. ) ;
+#133 = EDGE_CURVE ( 'NONE', #111, #124, #169, .T. ) ;
+#134 = VECTOR ( 'NONE', #147, 39.37007874015748100 ) ;
+#135 = VECTOR ( 'NONE', #6, 39.37007874015748100 ) ;
+#136 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.9805806756909200000, -0.1961161351381845400 ) ) ;
+#137 = CARTESIAN_POINT ( 'NONE',  ( -0.5999999999999999800, 0.6799999999999998300, 0.8399999999999999700 ) ) ;
+#138 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#139 = ORIENTED_EDGE ( 'NONE', *, *, #491, .F. ) ;
+#140 = CARTESIAN_POINT ( 'NONE',  ( 0.7999999999999999300, 0.4649999999999998000, 0.2562500000000001400 ) ) ;
+#141 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#142 = EDGE_CURVE ( 'NONE', #419, #111, #643, .T. ) ;
+#143 = CARTESIAN_POINT ( 'NONE',  ( -0.5999999999999999800, 0.04999999999999987800, -0.1000000000000000100 ) ) ;
+#144 = LINE ( 'NONE', #123, #623 ) ;
+#145 = ADVANCED_FACE ( 'NONE', ( #575 ), #605, .T. ) ;
+#146 = ORIENTED_EDGE ( 'NONE', *, *, #632, .T. ) ;
+#147 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#148 = CARTESIAN_POINT ( 'NONE',  ( -0.2500000000000000600, -9.797174393178824900E-017, -0.1000000000000000100 ) ) ;
+#149 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #218, .NOT_KNOWN. ) ;
+#150 = ADVANCED_FACE ( 'NONE', ( #552 ), #259, .T. ) ;
+#151 = VERTEX_POINT ( 'NONE', #212 ) ;
+#152 = ORIENTED_EDGE ( 'NONE', *, *, #51, .F. ) ;
+#153 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#154 = FACE_OUTER_BOUND ( 'NONE', #371, .T. ) ;
+#155 = AXIS2_PLACEMENT_3D ( 'NONE', #236, #33, #72 ) ;
+#156 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, 0.4242987285365911200, 0.7499999999999998900 ) ) ;
+#157 = ADVANCED_FACE ( 'NONE', ( #542 ), #274, .F. ) ;
+#158 = EDGE_CURVE ( 'NONE', #114, #467, #519, .T. ) ;
+#159 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#160 = ORIENTED_EDGE ( 'NONE', *, *, #97, .T. ) ;
+#161 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#162 = FACE_OUTER_BOUND ( 'NONE', #351, .T. ) ;
+#163 = ORIENTED_EDGE ( 'NONE', *, *, #568, .F. ) ;
+#164 = EDGE_CURVE ( 'NONE', #624, #415, #14, .T. ) ;
+#165 = ORIENTED_EDGE ( 'NONE', *, *, #521, .F. ) ;
+#166 = CARTESIAN_POINT ( 'NONE',  ( 0.5767003399721217800, 0.4649999999999998000, 0.2374999999999987700 ) ) ;
+#167 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, 0.2649999999999997900, 0.2562500000000001400 ) ) ;
+#168 = VECTOR ( 'NONE', #566, 39.37007874015748100 ) ;
+#169 = LINE ( 'NONE', #555, #508 ) ;
+#170 = EDGE_CURVE ( 'NONE', #113, #505, #418, .T. ) ;
+#171 = SURFACE_STYLE_FILL_AREA ( #102 ) ;
+#172 = AXIS2_PLACEMENT_3D ( 'NONE', #462, #364, #222 ) ;
+#173 = LINE ( 'NONE', #234, #263 ) ;
+#174 = VECTOR ( 'NONE', #511, 39.37007874015748100 ) ;
+#175 = AXIS2_PLACEMENT_3D ( 'NONE', #490, #197, #550 ) ;
+#176 = ORIENTED_EDGE ( 'NONE', *, *, #296, .T. ) ;
+#177 = ORIENTED_EDGE ( 'NONE', *, *, #42, .F. ) ;
+#178 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#179 = VECTOR ( 'NONE', #275, 39.37007874015748100 ) ;
+#180 = VECTOR ( 'NONE', #141, 39.37007874015748100 ) ;
+#181 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#182 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, 0.4649999999999998000, 0.2562500000000001400 ) ) ;
+#183 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #284 ), #125 ) ;
+#184 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -3.244069492476316800E-015 ) ) ;
+#185 = ORIENTED_EDGE ( 'NONE', *, *, #164, .T. ) ;
+#186 = CARTESIAN_POINT ( 'NONE',  ( -0.6509901951359279300, 0.7299999999999998700, 0.8499999999999999800 ) ) ;
+#187 = EDGE_CURVE ( 'NONE', #122, #360, #516, .T. ) ;
+#188 = CARTESIAN_POINT ( 'NONE',  ( -0.5999999999999999800, 0.0000000000000000000, 0.8399999999999999700 ) ) ;
+#189 = VECTOR ( 'NONE', #394, 39.37007874015748100 ) ;
+#190 = CARTESIAN_POINT ( 'NONE',  ( -0.5999999999999999800, 0.4242987285365911200, 0.7499999999999998900 ) ) ;
+#191 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#192 = ORIENTED_EDGE ( 'NONE', *, *, #288, .F. ) ;
+#193 = CARTESIAN_POINT ( 'NONE',  ( -0.5500000000000000400, 0.7299999999999998700, -0.1000000000000000100 ) ) ;
+#194 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#195 = EDGE_CURVE ( 'NONE', #26, #495, #119, .T. ) ;
+#196 = CIRCLE ( 'NONE', #545, 0.05000000000000001000 ) ;
+#197 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#198 = LINE ( 'NONE', #644, #439 ) ;
+#199 = CARTESIAN_POINT ( 'NONE',  ( -0.5500000000000000400, 0.6799999999999998300, 0.0000000000000000000 ) ) ;
+#200 =( CONVERSION_BASED_UNIT ( 'INCH', #532 ) LENGTH_UNIT ( ) NAMED_UNIT ( #306 ) );
+#201 = ORIENTED_EDGE ( 'NONE', *, *, #319, .T. ) ;
+#202 = ORIENTED_EDGE ( 'NONE', *, *, #536, .T. ) ;
+#203 = CARTESIAN_POINT ( 'NONE',  ( 0.6311082432557060300, 0.4649999999999998000, 0.1535966028084420300 ) ) ;
+#204 = CYLINDRICAL_SURFACE ( 'NONE', #639, 0.1000000000000000200 ) ;
+#205 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #607 ) ;
+#206 = ADVANCED_FACE ( 'NONE', ( #412 ), #459, .F. ) ;
+#207 = ORIENTED_EDGE ( 'NONE', *, *, #64, .T. ) ;
+#208 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#209 = PRODUCT_CONTEXT ( 'NONE', #383, 'mechanical' ) ;
+#210 = EDGE_CURVE ( 'NONE', #360, #350, #385, .T. ) ;
+#211 = ADVANCED_FACE ( 'NONE', ( #560 ), #614, .T. ) ;
+#212 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, 0.05000000000000001000, -0.1000000000000000100 ) ) ;
+#213 = CARTESIAN_POINT ( 'NONE',  ( -0.5999999999999999800, 0.6799999999999998300, 0.0000000000000000000 ) ) ;
+#214 = VERTEX_POINT ( 'NONE', #312 ) ;
+#215 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#216 = LINE ( 'NONE', #316, #179 ) ;
+#217 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#218 = PRODUCT ( 'striker', 'striker', '', ( #209 ) ) ;
+#219 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#220 = ORIENTED_EDGE ( 'NONE', *, *, #465, .F. ) ;
+#221 = ORIENTED_EDGE ( 'NONE', *, *, #268, .F. ) ;
+#222 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -3.244069492476316800E-015 ) ) ;
+#223 = EDGE_CURVE ( 'NONE', #124, #29, #41, .T. ) ;
+#224 = CARTESIAN_POINT ( 'NONE',  ( -0.2500000000000000600, 0.7299999999999998700, -0.1000000000000000100 ) ) ;
+#225 = ORIENTED_EDGE ( 'NONE', *, *, #319, .F. ) ;
+#226 = CIRCLE ( 'NONE', #420, 0.05000000000000001000 ) ;
+#227 = CARTESIAN_POINT ( 'NONE',  ( -0.2500000000000000600, 0.6799999999999998300, -0.1000000000000000100 ) ) ;
+#228 = EDGE_CURVE ( 'NONE', #122, #285, #144, .T. ) ;
+#229 = LINE ( 'NONE', #327, #180 ) ;
+#230 = ORIENTED_EDGE ( 'NONE', *, *, #133, .T. ) ;
+#231 = ORIENTED_EDGE ( 'NONE', *, *, #223, .T. ) ;
+#232 = CARTESIAN_POINT ( 'NONE',  ( -0.5500000000000000400, 0.7299999999999998700, 0.8499999999999999800 ) ) ;
+#233 = VERTEX_POINT ( 'NONE', #120 ) ;
+#234 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, -4.460595552154893600E-016, 0.1374999999999987300 ) ) ;
+#235 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#236 = CARTESIAN_POINT ( 'NONE',  ( -0.2500000000000000600, 0.04999999999999996800, -0.1000000000000000100 ) ) ;
+#237 = LINE ( 'NONE', #338, #189 ) ;
+#238 = PLANE ( 'NONE',  #367 ) ;
+#239 = AXIS2_PLACEMENT_3D ( 'NONE', #240, #586, #629 ) ;
+#240 = CARTESIAN_POINT ( 'NONE',  ( -0.2500000000000000600, 0.6799999999999998300, 0.0000000000000000000 ) ) ;
+#241 = ORIENTED_EDGE ( 'NONE', *, *, #572, .F. ) ;
+#242 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#243 = EDGE_CURVE ( 'NONE', #624, #151, #562, .T. ) ;
+#244 = FACE_OUTER_BOUND ( 'NONE', #302, .T. ) ;
+#245 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#246 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#247 = ORIENTED_EDGE ( 'NONE', *, *, #491, .T. ) ;
+#248 = PLANE ( 'NONE',  #48 ) ;
+#249 = ADVANCED_FACE ( 'NONE', ( #469 ), #487, .T. ) ;
+#250 = ORIENTED_EDGE ( 'NONE', *, *, #465, .T. ) ;
+#251 =( CONVERSION_BASED_UNIT ( 'INCH', #32 ) LENGTH_UNIT ( ) NAMED_UNIT ( #612 ) );
+#252 = VERTEX_POINT ( 'NONE', #313 ) ;
+#253 = AXIS2_PLACEMENT_3D ( 'NONE', #372, #178, #571 ) ;
+#254 = CARTESIAN_POINT ( 'NONE',  ( 0.7257473812947276000, 0.4649999999999998000, 0.1922008095288493800 ) ) ;
+#255 = FACE_OUTER_BOUND ( 'NONE', #628, .T. ) ;
+#256 = VECTOR ( 'NONE', #416, 39.37007874015748100 ) ;
+#257 = VECTOR ( 'NONE', #398, 39.37007874015748100 ) ;
+#258 = EDGE_CURVE ( 'NONE', #369, #285, #58, .T. ) ;
+#259 = PLANE ( 'NONE',  #121 ) ;
+#260 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#261 = ORIENTED_EDGE ( 'NONE', *, *, #158, .T. ) ;
+#262 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, -9.797174393178824900E-017, 0.8499999999999999800 ) ) ;
+#263 = VECTOR ( 'NONE', #627, 39.37007874015748100 ) ;
+#264 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #218 ) ) ;
+#265 = VECTOR ( 'NONE', #344, 39.37007874015748100 ) ;
+#266 = VERTEX_POINT ( 'NONE', #318 ) ;
+#267 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#268 = EDGE_CURVE ( 'NONE', #233, #114, #71, .T. ) ;
+#269 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#270 = ORIENTED_EDGE ( 'NONE', *, *, #563, .T. ) ;
+#271 = VERTEX_POINT ( 'NONE', #22 ) ;
+#272 = EDGE_CURVE ( 'NONE', #510, #460, #455, .T. ) ;
+#273 = FACE_OUTER_BOUND ( 'NONE', #365, .T. ) ;
+#274 = CYLINDRICAL_SURFACE ( 'NONE', #28, 0.2734644684100194200 ) ;
+#275 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#276 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'striker', ( #78, #331 ), #304 ) ;
+#277 = AXIS2_PLACEMENT_3D ( 'NONE', #578, #423, #74 ) ;
+#278 = ORIENTED_EDGE ( 'NONE', *, *, #529, .T. ) ;
+#279 = VECTOR ( 'NONE', #492, 39.37007874015748100 ) ;
+#280 = EDGE_CURVE ( 'NONE', #214, #369, #216, .T. ) ;
+#281 = ORIENTED_EDGE ( 'NONE', *, *, #210, .T. ) ;
+#282 = ORIENTED_EDGE ( 'NONE', *, *, #110, .F. ) ;
+#283 = ORIENTED_EDGE ( 'NONE', *, *, #620, .F. ) ;
+#284 = STYLED_ITEM ( 'NONE', ( #375 ), #276 ) ;
+#285 = VERTEX_POINT ( 'NONE', #167 ) ;
+#286 = SHAPE_DEFINITION_REPRESENTATION ( #451, #276 ) ;
+#287 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#288 = EDGE_CURVE ( 'NONE', #8, #10, #600, .T. ) ;
+#289 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#290 = EDGE_LOOP ( 'NONE', ( #283, #54, #282, #608 ) ) ;
+#291 = CARTESIAN_POINT ( 'NONE',  ( -0.5500000000000000400, 0.7299999999999998700, 0.8499999999999999800 ) ) ;
+#292 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#293 = ORIENTED_EDGE ( 'NONE', *, *, #195, .F. ) ;
+#294 = ORIENTED_EDGE ( 'NONE', *, *, #133, .F. ) ;
+#295 = SURFACE_STYLE_USAGE ( .BOTH. , #445 ) ;
+#296 = EDGE_CURVE ( 'NONE', #570, #505, #20, .T. ) ;
+#297 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#298 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#299 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#300 = CARTESIAN_POINT ( 'NONE',  ( 0.7999999999999999300, 0.2649999999999997900, 0.2562500000000001400 ) ) ;
+#301 = CARTESIAN_POINT ( 'NONE',  ( -0.5999999999999999800, 0.04999999999999993300, 0.0000000000000000000 ) ) ;
+#302 = EDGE_LOOP ( 'NONE', ( #366, #192, #127, #293 ) ) ;
+#303 = ADVANCED_FACE ( 'NONE', ( #82 ), #204, .T. ) ;
+#304 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #358 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #251, #299, #441 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#305 = CIRCLE ( 'NONE', #517, 0.1000000000000000100 ) ;
+#306 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#307 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#308 = VERTEX_POINT ( 'NONE', #224 ) ;
+#309 = ORIENTED_EDGE ( 'NONE', *, *, #558, .T. ) ;
+#310 = EDGE_CURVE ( 'NONE', #271, #415, #126, .T. ) ;
+#311 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#312 = CARTESIAN_POINT ( 'NONE',  ( 0.5767003399721217800, 0.2649999999999997900, 0.1375000000000001200 ) ) ;
+#313 = CARTESIAN_POINT ( 'NONE',  ( -0.2500000000000000600, -9.797174393178824900E-017, 0.8499999999999999800 ) ) ;
+#314 = LINE ( 'NONE', #647, #500 ) ;
+#315 = ORIENTED_EDGE ( 'NONE', *, *, #92, .F. ) ;
+#316 = CARTESIAN_POINT ( 'NONE',  ( 0.7999999999999999300, 0.2649999999999997900, 0.1375000000000001200 ) ) ;
+#317 = ORIENTED_EDGE ( 'NONE', *, *, #69, .F. ) ;
+#318 = CARTESIAN_POINT ( 'NONE',  ( -0.5999999999999999800, 0.4678877179719978500, 0.8399999999999999700 ) ) ;
+#319 = EDGE_CURVE ( 'NONE', #308, #233, #226, .T. ) ;
+#320 = VECTOR ( 'NONE', #436, 39.37007874015748100 ) ;
+#321 = ORIENTED_EDGE ( 'NONE', *, *, #645, .F. ) ;
+#322 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#323 = PLANE ( 'NONE',  #442 ) ;
+#324 = CARTESIAN_POINT ( 'NONE',  ( -0.5999999999999999800, 0.6799999999999998300, -0.1000000000000000100 ) ) ;
+#325 = ORIENTED_EDGE ( 'NONE', *, *, #272, .F. ) ;
+#326 = ORIENTED_EDGE ( 'NONE', *, *, #567, .T. ) ;
+#327 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, 0.4649999999999998000, 0.0000000000000000000 ) ) ;
+#328 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, 0.4678877179719978500, 0.8399999999999999700 ) ) ;
+#329 = FACE_OUTER_BOUND ( 'NONE', #426, .T. ) ;
+#330 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#331 = AXIS2_PLACEMENT_3D ( 'NONE', #89, #601, #405 ) ;
+#332 = ORIENTED_EDGE ( 'NONE', *, *, #223, .F. ) ;
+#333 = AXIS2_PLACEMENT_3D ( 'NONE', #190, #85, #235 ) ;
+#334 = ORIENTED_EDGE ( 'NONE', *, *, #164, .F. ) ;
+#335 = CARTESIAN_POINT ( 'NONE',  ( -0.5500000000000000400, 0.04999999999999993300, -0.1000000000000000100 ) ) ;
+#336 = CARTESIAN_POINT ( 'NONE',  ( -0.5792893218813453000, 0.7299999999999998700, 0.8499999999999999800 ) ) ;
+#337 = ORIENTED_EDGE ( 'NONE', *, *, #210, .F. ) ;
+#338 = CARTESIAN_POINT ( 'NONE',  ( -0.2500000000000000600, -3.061616997868382400E-017, 0.4000000000000000200 ) ) ;
+#339 = ORIENTED_EDGE ( 'NONE', *, *, #457, .F. ) ;
+#340 = ORIENTED_EDGE ( 'NONE', *, *, #563, .F. ) ;
+#341 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#342 = AXIS2_PLACEMENT_3D ( 'NONE', #520, #65, #413 ) ;
+#343 = ADVANCED_FACE ( 'NONE', ( #255 ), #323, .T. ) ;
+#344 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#345 = VECTOR ( 'NONE', #587, 39.37007874015748100 ) ;
+#346 = CARTESIAN_POINT ( 'NONE',  ( 0.7999999999999999300, 0.2649999999999997900, 0.0000000000000000000 ) ) ;
+#347 = ORIENTED_EDGE ( 'NONE', *, *, #381, .T. ) ;
+#348 = CARTESIAN_POINT ( 'NONE',  ( -0.2207106781186547700, 0.7299999999999998700, 0.8499999999999999800 ) ) ;
+#349 = ADVANCED_FACE ( 'NONE', ( #329 ), #617, .T. ) ;
+#350 = VERTEX_POINT ( 'NONE', #182 ) ;
+#351 = EDGE_LOOP ( 'NONE', ( #207, #77, #421, #512 ) ) ;
+#352 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #284 ) ) ;
+#353 = SURFACE_SIDE_STYLE ('',( #437 ) ) ;
+#354 = VECTOR ( 'NONE', #410, 39.37007874015748100 ) ;
+#355 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, 0.04999999999999996800, 0.0000000000000000000 ) ) ;
+#356 = AXIS2_PLACEMENT_3D ( 'NONE', #3, #341, #49 ) ;
+#357 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, 0.2649999999999997900, 0.0000000000000000000 ) ) ;
+#358 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #251, 'distance_accuracy_value', 'NONE');
+#359 = ORIENTED_EDGE ( 'NONE', *, *, #187, .T. ) ;
+#360 = VERTEX_POINT ( 'NONE', #140 ) ;
+#361 = CARTESIAN_POINT ( 'NONE',  ( 0.7999999999999999300, -7.875405544235230000E-016, 0.2562499999999987600 ) ) ;
+#362 = COLOUR_RGB ( '',0.2941176470588235400, 0.2941176470588235400, 0.2941176470588235400 ) ;
+#363 = ORIENTED_EDGE ( 'NONE', *, *, #158, .F. ) ;
+#364 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -3.244069492476316800E-015, 1.000000000000000000 ) ) ;
+#365 = EDGE_LOOP ( 'NONE', ( #466, #261, #493, #160 ) ) ;
+#366 = ORIENTED_EDGE ( 'NONE', *, *, #97, .F. ) ;
+#367 = AXIS2_PLACEMENT_3D ( 'NONE', #640, #44, #287 ) ;
+#368 = CYLINDRICAL_SURFACE ( 'NONE', #606, 0.1000000000000000200 ) ;
+#369 = VERTEX_POINT ( 'NONE', #530 ) ;
+#370 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, -7.875405544235230000E-016, 0.2562499999999987600 ) ) ;
+#371 = EDGE_LOOP ( 'NONE', ( #225, #152, #363, #221 ) ) ;
+#372 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, 0.4242987285365911200, 0.7499999999999998900 ) ) ;
+#373 = PLANE ( 'NONE',  #87 ) ;
+#374 = PLANE ( 'NONE',  #11 ) ;
+#375 = PRESENTATION_STYLE_ASSIGNMENT (( #446 ) ) ;
+#376 = CARTESIAN_POINT ( 'NONE',  ( 0.7999999999999999300, -7.875405544235230000E-016, 0.2562499999999987600 ) ) ;
+#377 = VECTOR ( 'NONE', #574, 39.37007874015748100 ) ;
+#378 = VECTOR ( 'NONE', #424, 39.37007874015748100 ) ;
+#379 = ORIENTED_EDGE ( 'NONE', *, *, #572, .T. ) ;
+#380 = CARTESIAN_POINT ( 'NONE',  ( 0.7059469495372516800, 0.4649999999999998000, 0.2902209243125893300 ) ) ;
+#381 = EDGE_CURVE ( 'NONE', #369, #99, #173, .T. ) ;
+#382 = ORIENTED_EDGE ( 'NONE', *, *, #243, .F. ) ;
+#383 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#384 = LINE ( 'NONE', #79, #39 ) ;
+#385 = LINE ( 'NONE', #16, #174 ) ;
+#386 = CARTESIAN_POINT ( 'NONE',  ( -0.6509901951359279300, 0.6799999999999998300, 0.8399999999999999700 ) ) ;
+#387 = EDGE_LOOP ( 'NONE', ( #337, #247, #177, #231, #17, #548 ) ) ;
+#388 = CARTESIAN_POINT ( 'NONE',  ( -0.5500000000000000400, -9.797174393178824900E-017, 0.8499999999999999800 ) ) ;
+#389 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#390 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#391 = AXIS2_PLACEMENT_3D ( 'NONE', #7, #208, #307 ) ;
+#392 = EDGE_LOOP ( 'NONE', ( #443, #489, #359, #281 ) ) ;
+#393 = ADVANCED_FACE ( 'NONE', ( #162 ), #428, .T. ) ;
+#394 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#395 = FACE_OUTER_BOUND ( 'NONE', #392, .T. ) ;
+#396 = VECTOR ( 'NONE', #311, 39.37007874015748100 ) ;
+#397 = CARTESIAN_POINT ( 'NONE',  ( -0.5500000000000000400, 0.04999999999999993300, 0.0000000000000000000 ) ) ;
+#398 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#399 = FILL_AREA_STYLE_COLOUR ( '', #362 ) ;
+#400 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #599, 'distance_accuracy_value', 'NONE');
+#401 = ORIENTED_EDGE ( 'NONE', *, *, #558, .F. ) ;
+#402 = ADVANCED_FACE ( 'NONE', ( #395 ), #534, .T. ) ;
+#403 = AXIS2_PLACEMENT_3D ( 'NONE', #463, #454, #63 ) ;
+#404 = LINE ( 'NONE', #485, #279 ) ;
+#405 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#406 = STYLED_ITEM ( 'NONE', ( #553 ), #78 ) ;
+#407 = ORIENTED_EDGE ( 'NONE', *, *, #142, .T. ) ;
+#408 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#409 = ORIENTED_EDGE ( 'NONE', *, *, #457, .T. ) ;
+#410 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#411 = ORIENTED_EDGE ( 'NONE', *, *, #310, .F. ) ;
+#412 = FACE_OUTER_BOUND ( 'NONE', #450, .T. ) ;
+#413 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 1.224646799147353000E-016, 0.0000000000000000000 ) ) ;
+#414 = ORIENTED_EDGE ( 'NONE', *, *, #381, .F. ) ;
+#415 = VERTEX_POINT ( 'NONE', #478 ) ;
+#416 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 3.073328992872299300E-015 ) ) ;
+#417 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #107 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #200, #194, #390 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#418 = LINE ( 'NONE', #636, #135 ) ;
+#419 = VERTEX_POINT ( 'NONE', #576 ) ;
+#420 = AXIS2_PLACEMENT_3D ( 'NONE', #227, #471, #181 ) ;
+#421 = ORIENTED_EDGE ( 'NONE', *, *, #632, .F. ) ;
+#422 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #260 );
+#423 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#424 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#425 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.1961161351381845700, 0.9805806756909201100 ) ) ;
+#426 = EDGE_LOOP ( 'NONE', ( #132, #339, #332, #294 ) ) ;
+#427 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#428 = PLANE ( 'NONE',  #277 ) ;
+#429 = LINE ( 'NONE', #2, #630 ) ;
+#430 = ORIENTED_EDGE ( 'NONE', *, *, #195, .T. ) ;
+#431 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, 0.7299999999999998700, -0.1000000000000000100 ) ) ;
+#432 = AXIS2_PLACEMENT_3D ( 'NONE', #34, #634, #540 ) ;
+#433 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#434 = ORIENTED_EDGE ( 'NONE', *, *, #310, .T. ) ;
+#435 = FILL_AREA_STYLE_COLOUR ( '', #565 ) ;
+#436 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#437 = SURFACE_STYLE_FILL_AREA ( #106 ) ;
+#438 = ADVANCED_FACE ( 'NONE', ( #154 ), #24, .T. ) ;
+#439 = VECTOR ( 'NONE', #544, 39.37007874015748100 ) ;
+#440 = PLANE ( 'NONE',  #175 ) ;
+#441 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#442 = AXIS2_PLACEMENT_3D ( 'NONE', #31, #25, #498 ) ;
+#443 = ORIENTED_EDGE ( 'NONE', *, *, #536, .F. ) ;
+#444 = ORIENTED_EDGE ( 'NONE', *, *, #243, .T. ) ;
+#445 = SURFACE_SIDE_STYLE ('',( #171 ) ) ;
+#446 = SURFACE_STYLE_USAGE ( .BOTH. , #353 ) ;
+#447 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, 0.6799999999999998300, 0.8399999999999999700 ) ) ;
+#448 = ADVANCED_FACE ( 'NONE', ( #273 ), #373, .T. ) ;
+#449 = VECTOR ( 'NONE', #322, 39.37007874015748100 ) ;
+#450 = EDGE_LOOP ( 'NONE', ( #616, #409, #543, #347 ) ) ;
+#451 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #525 ) ;
+#452 = CARTESIAN_POINT ( 'NONE',  ( -0.5999999999999999800, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#453 = AXIS2_PLACEMENT_3D ( 'NONE', #376, #537, #581 ) ;
+#454 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#455 = LINE ( 'NONE', #116, #168 ) ;
+#456 = CYLINDRICAL_SURFACE ( 'NONE', #609, 0.05000000000000001000 ) ;
+#457 = EDGE_CURVE ( 'NONE', #29, #214, #384, .T. ) ;
+#458 = LINE ( 'NONE', #91, #464 ) ;
+#459 = PLANE ( 'NONE',  #172 ) ;
+#460 = VERTEX_POINT ( 'NONE', #533 ) ;
+#461 = ORIENTED_EDGE ( 'NONE', *, *, #142, .F. ) ;
+#462 = CARTESIAN_POINT ( 'NONE',  ( 0.7999999999999999300, -4.460595552154893600E-016, 0.1374999999999987300 ) ) ;
+#463 = CARTESIAN_POINT ( 'NONE',  ( -0.2500000000000000600, 0.04999999999999996800, 0.0000000000000000000 ) ) ;
+#464 = VECTOR ( 'NONE', #245, 39.37007874015748100 ) ;
+#465 = EDGE_CURVE ( 'NONE', #151, #570, #539, .T. ) ;
+#466 = ORIENTED_EDGE ( 'NONE', *, *, #638, .T. ) ;
+#467 = VERTEX_POINT ( 'NONE', #475 ) ;
+#468 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #406 ) ) ;
+#469 = FACE_OUTER_BOUND ( 'NONE', #108, .T. ) ;
+#470 = FACE_OUTER_BOUND ( 'NONE', #290, .T. ) ;
+#471 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#472 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#473 = ORIENTED_EDGE ( 'NONE', *, *, #568, .T. ) ;
+#474 = ORIENTED_EDGE ( 'NONE', *, *, #69, .T. ) ;
+#475 = CARTESIAN_POINT ( 'NONE',  ( -0.2500000000000000600, 0.7299999999999998700, 0.8499999999999999800 ) ) ;
+#476 = AXIS2_PLACEMENT_3D ( 'NONE', #83, #635, #330 ) ;
+#477 = CIRCLE ( 'NONE', #476, 0.05000000000000001000 ) ;
+#478 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, 0.4242987285365911200, 0.8499999999999999800 ) ) ;
+#479 = ORIENTED_EDGE ( 'NONE', *, *, #129, .T. ) ;
+#480 = ORIENTED_EDGE ( 'NONE', *, *, #228, .T. ) ;
+#481 = CARTESIAN_POINT ( 'NONE',  ( 0.5767003399721217800, 0.4649999999999998000, 0.1375000000000002300 ) ) ;
+#482 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #406 ), #417 ) ;
+#483 = ORIENTED_EDGE ( 'NONE', *, *, #258, .F. ) ;
+#484 = CARTESIAN_POINT ( 'NONE',  ( 0.7999999999999999300, 0.4649999999999998000, 0.0000000000000000000 ) ) ;
+#485 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, -9.797174393178824900E-017, 0.8499999999999999800 ) ) ;
+#486 = AXIS2_PLACEMENT_3D ( 'NONE', #380, #30, #427 ) ;
+#487 = CYLINDRICAL_SURFACE ( 'NONE', #403, 0.05000000000000001000 ) ;
+#488 = CIRCLE ( 'NONE', #432, 0.2734644684100194200 ) ;
+#489 = ORIENTED_EDGE ( 'NONE', *, *, #228, .F. ) ;
+#490 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#491 = EDGE_CURVE ( 'NONE', #360, #579, #523, .T. ) ;
+#492 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#493 = ORIENTED_EDGE ( 'NONE', *, *, #64, .F. ) ;
+#494 = ORIENTED_EDGE ( 'NONE', *, *, #620, .T. ) ;
+#495 = VERTEX_POINT ( 'NONE', #324 ) ;
+#496 = CARTESIAN_POINT ( 'NONE',  ( 0.6311082432557060300, 0.2649999999999997900, 0.1535966028084420300 ) ) ;
+#497 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#498 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#499 = CYLINDRICAL_SURFACE ( 'NONE', #556, 0.05000000000000001000 ) ;
+#500 = VECTOR ( 'NONE', #105, 39.37007874015748100 ) ;
+#501 = LINE ( 'NONE', #40, #378 ) ;
+#502 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#503 = EDGE_CURVE ( 'NONE', #271, #266, #507, .T. ) ;
+#504 = CARTESIAN_POINT ( 'NONE',  ( -0.2500000000000000600, 0.7299999999999998700, 0.8499999999999999800 ) ) ;
+#505 = VERTEX_POINT ( 'NONE', #582 ) ;
+#506 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#507 = LINE ( 'NONE', #328, #57 ) ;
+#508 = VECTOR ( 'NONE', #159, 39.37007874015748100 ) ;
+#509 = CIRCLE ( 'NONE', #333, 0.1000000000000000200 ) ;
+#510 = VERTEX_POINT ( 'NONE', #130 ) ;
+#511 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#512 = ORIENTED_EDGE ( 'NONE', *, *, #288, .T. ) ;
+#513 = ORIENTED_EDGE ( 'NONE', *, *, #170, .T. ) ;
+#514 = CARTESIAN_POINT ( 'NONE',  ( -0.5500000000000000400, 0.7299999999999998700, 0.4000000000000000200 ) ) ;
+#515 = LINE ( 'NONE', #188, #118 ) ;
+#516 = LINE ( 'NONE', #361, #256 ) ;
+#517 = AXIS2_PLACEMENT_3D ( 'NONE', #547, #96, #648 ) ;
+#518 = CIRCLE ( 'NONE', #356, 0.1000000000000000200 ) ;
+#519 =( BOUNDED_CURVE ( )  B_SPLINE_CURVE ( 3, ( #447, #9, #348, #504 ),
+ .UNSPECIFIED., .F., .F. ) 
+ B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
+ ( 4.712388980384689700, 6.283185307179586200 ),
+ .UNSPECIFIED. ) 
+ CURVE ( )  GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) 
+ REPRESENTATION_ITEM ( '' )  );
+#520 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.4000000000000000200 ) ) ;
+#521 = EDGE_CURVE ( 'NONE', #252, #624, #477, .T. ) ;
+#522 = CLOSED_SHELL ( 'NONE', ( #53, #393, #211, #55, #145, #101, #603, #402, #150, #206, #157, #303, #349, #448, #343, #590, #249, #104, #438, #594 ) ) ;
+#523 = CIRCLE ( 'NONE', #486, 0.1000000000000000200 ) ;
+#524 = FACE_BOUND ( 'NONE', #76, .T. ) ;
+#525 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #149, #84 ) ;
+#526 = ORIENTED_EDGE ( 'NONE', *, *, #187, .F. ) ;
+#527 = ORIENTED_EDGE ( 'NONE', *, *, #42, .T. ) ;
+#528 = CARTESIAN_POINT ( 'NONE',  ( 0.5767003399721217800, -1.084823351980953500E-015, 0.2374999999999987700 ) ) ;
+#529 = EDGE_CURVE ( 'NONE', #495, #8, #531, .T. ) ;
+#530 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, 0.2649999999999997900, 0.1374999999999995700 ) ) ;
+#531 = CIRCLE ( 'NONE', #538, 0.05000000000000001000 ) ;
+#532 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #502 );
+#533 = CARTESIAN_POINT ( 'NONE',  ( -0.5999999999999999800, 0.04999999999999992000, 0.8499999999999999800 ) ) ;
+#534 = PLANE ( 'NONE',  #453 ) ;
+#535 = ORIENTED_EDGE ( 'NONE', *, *, #110, .T. ) ;
+#536 = EDGE_CURVE ( 'NONE', #285, #350, #90, .T. ) ;
+#537 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -3.073328992872299300E-015, 1.000000000000000000 ) ) ;
+#538 = AXIS2_PLACEMENT_3D ( 'NONE', #541, #246, #549 ) ;
+#539 = CIRCLE ( 'NONE', #155, 0.05000000000000001000 ) ;
+#540 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#541 = CARTESIAN_POINT ( 'NONE',  ( -0.5500000000000000400, 0.6799999999999998300, -0.1000000000000000100 ) ) ;
+#542 = FACE_OUTER_BOUND ( 'NONE', #595, .T. ) ;
+#543 = ORIENTED_EDGE ( 'NONE', *, *, #280, .T. ) ;
+#544 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#545 = AXIS2_PLACEMENT_3D ( 'NONE', #593, #596, #5 ) ;
+#546 = ORIENTED_EDGE ( 'NONE', *, *, #19, .T. ) ;
+#547 = CARTESIAN_POINT ( 'NONE',  ( 0.5767003399721217800, 0.2649999999999997900, 0.2374999999999987700 ) ) ;
+#548 = ORIENTED_EDGE ( 'NONE', *, *, #21, .F. ) ;
+#549 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#550 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#551 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, 0.04999999999999995400, 0.8499999999999999800 ) ) ;
+#552 = FACE_OUTER_BOUND ( 'NONE', #577, .T. ) ;
+#553 = PRESENTATION_STYLE_ASSIGNMENT (( #295 ) ) ;
+#554 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#555 = CARTESIAN_POINT ( 'NONE',  ( 0.6311082432557060300, -6.829619984160658000E-017, 0.1535966028084420300 ) ) ;
+#556 = AXIS2_PLACEMENT_3D ( 'NONE', #199, #646, #292 ) ;
+#557 = ORIENTED_EDGE ( 'NONE', *, *, #75, .F. ) ;
+#558 = EDGE_CURVE ( 'NONE', #113, #252, #404, .T. ) ;
+#559 = LINE ( 'NONE', #431, #320 ) ;
+#560 = FACE_OUTER_BOUND ( 'NONE', #131, .T. ) ;
+#561 = CARTESIAN_POINT ( 'NONE',  ( 0.7798945267431974800, -6.829619984160658000E-017, -0.07584937629939572700 ) ) ;
+#562 = LINE ( 'NONE', #355, #354 ) ;
+#563 = EDGE_CURVE ( 'NONE', #151, #233, #559, .T. ) ;
+#564 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, 0.6799999999999998300, 0.0000000000000000000 ) ) ;
+#565 = COLOUR_RGB ( '',0.2941176470588235400, 0.2941176470588235400, 0.2941176470588235400 ) ;
+#566 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#567 = EDGE_CURVE ( 'NONE', #214, #111, #305, .T. ) ;
+#568 = EDGE_CURVE ( 'NONE', #26, #266, #515, .T. ) ;
+#569 = AXIS2_PLACEMENT_3D ( 'NONE', #335, #297, #47 ) ;
+#570 = VERTEX_POINT ( 'NONE', #148 ) ;
+#571 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#572 = EDGE_CURVE ( 'NONE', #415, #510, #13, .T. ) ;
+#573 = ORIENTED_EDGE ( 'NONE', *, *, #21, .T. ) ;
+#574 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#575 = FACE_OUTER_BOUND ( 'NONE', #1, .T. ) ;
+#576 = CARTESIAN_POINT ( 'NONE',  ( 0.7257473812947276000, 0.2649999999999997900, 0.1922008095288493800 ) ) ;
+#577 = EDGE_LOOP ( 'NONE', ( #461, #474, #480, #483, #626, #326 ) ) ;
+#578 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.7299999999999998700, 0.4000000000000000200 ) ) ;
+#579 = VERTEX_POINT ( 'NONE', #254 ) ;
+#580 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.8399999999999999700 ) ) ;
+#581 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -3.073328992872299300E-015 ) ) ;
+#582 = CARTESIAN_POINT ( 'NONE',  ( -0.5500000000000000400, -9.797174393178824900E-017, -0.1000000000000000100 ) ) ;
+#583 = VECTOR ( 'NONE', #93, 39.37007874015748100 ) ;
+#584 = EDGE_CURVE ( 'NONE', #29, #99, #4, .T. ) ;
+#585 = ORIENTED_EDGE ( 'NONE', *, *, #62, .F. ) ;
+#586 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#587 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#588 = VERTEX_POINT ( 'NONE', #143 ) ;
+#589 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#590 = ADVANCED_FACE ( 'NONE', ( #642 ), #368, .T. ) ;
+#591 = CARTESIAN_POINT ( 'NONE',  ( -0.2000000000000000100, 0.6799999999999998300, 0.8399999999999999700 ) ) ;
+#592 = VECTOR ( 'NONE', #269, 39.37007874015748100 ) ;
+#593 = CARTESIAN_POINT ( 'NONE',  ( -0.5500000000000000400, 0.04999999999999993300, 0.8499999999999999800 ) ) ;
+#594 = ADVANCED_FACE ( 'NONE', ( #244 ), #499, .T. ) ;
+#595 = EDGE_LOOP ( 'NONE', ( #527, #18, #407, #230 ) ) ;
+#596 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#597 = ORIENTED_EDGE ( 'NONE', *, *, #521, .T. ) ;
+#598 = ORIENTED_EDGE ( 'NONE', *, *, #268, .T. ) ;
+#599 =( CONVERSION_BASED_UNIT ( 'INCH', #422 ) LENGTH_UNIT ( ) NAMED_UNIT ( #408 ) );
+#600 = LINE ( 'NONE', #514, #377 ) ;
+#601 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#602 = ORIENTED_EDGE ( 'NONE', *, *, #272, .T. ) ;
+#603 = ADVANCED_FACE ( 'NONE', ( #112 ), #248, .T. ) ;
+#604 = EDGE_LOOP ( 'NONE', ( #411, #637, #15, #241 ) ) ;
+#605 = PLANE ( 'NONE',  #80 ) ;
+#606 = AXIS2_PLACEMENT_3D ( 'NONE', #156, #589, #50 ) ;
+#607 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#608 = ORIENTED_EDGE ( 'NONE', *, *, #129, .F. ) ;
+#609 = AXIS2_PLACEMENT_3D ( 'NONE', #397, #298, #153 ) ;
+#610 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#611 = VECTOR ( 'NONE', #619, 39.37007874015748100 ) ;
+#612 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#613 = EDGE_LOOP ( 'NONE', ( #334, #444, #270, #598, #585, #434 ) ) ;
+#614 = PLANE ( 'NONE',  #342 ) ;
+#615 = ORIENTED_EDGE ( 'NONE', *, *, #645, .T. ) ;
+#616 = ORIENTED_EDGE ( 'NONE', *, *, #584, .F. ) ;
+#617 = CYLINDRICAL_SURFACE ( 'NONE', #66, 0.1000000000000000200 ) ;
+#618 = LINE ( 'NONE', #301, #265 ) ;
+#619 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#620 = EDGE_CURVE ( 'NONE', #505, #588, #622, .T. ) ;
+#621 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#622 = CIRCLE ( 'NONE', #569, 0.05000000000000001000 ) ;
+#623 = VECTOR ( 'NONE', #217, 39.37007874015748100 ) ;
+#624 = VERTEX_POINT ( 'NONE', #551 ) ;
+#625 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#626 = ORIENTED_EDGE ( 'NONE', *, *, #280, .F. ) ;
+#627 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 3.244069492476316800E-015 ) ) ;
+#628 = EDGE_LOOP ( 'NONE', ( #309, #597, #185, #379, #602, #535 ) ) ;
+#629 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#630 = VECTOR ( 'NONE', #389, 39.37007874015748100 ) ;
+#631 = VECTOR ( 'NONE', #610, 39.37007874015748100 ) ;
+#632 = EDGE_CURVE ( 'NONE', #8, #308, #429, .T. ) ;
+#633 = LINE ( 'NONE', #186, #257 ) ;
+#634 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#635 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#636 = CARTESIAN_POINT ( 'NONE',  ( -0.5500000000000000400, -6.735557395310441300E-017, 0.4000000000000000200 ) ) ;
+#637 = ORIENTED_EDGE ( 'NONE', *, *, #503, .T. ) ;
+#638 = EDGE_CURVE ( 'NONE', #26, #114, #103, .T. ) ;
+#639 = AXIS2_PLACEMENT_3D ( 'NONE', #128, #625, #621 ) ;
+#640 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -0.1000000000000000100 ) ) ;
+#641 = CARTESIAN_POINT ( 'NONE',  ( -0.5999999999999999800, 0.4242987285365911200, 0.8499999999999999800 ) ) ;
+#642 = FACE_OUTER_BOUND ( 'NONE', #604, .T. ) ;
+#643 = CIRCLE ( 'NONE', #391, 0.2734644684100194200 ) ;
+#644 = CARTESIAN_POINT ( 'NONE',  ( 0.7257473812947276000, -6.829619984160658000E-017, 0.1922008095288494100 ) ) ;
+#645 = EDGE_CURVE ( 'NONE', #570, #252, #237, .T. ) ;
+#646 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#647 = CARTESIAN_POINT ( 'NONE',  ( -0.5999999999999999800, 0.7299999999999998700, -0.1000000000000000100 ) ) ;
+#648 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+ENDSEC;
+END-ISO-10303-21;