diff --git a/Firearms/The_Experiment_Remake-RollaTroll/README.md b/Firearms/The_Experiment_Remake-RollaTroll/README.md new file mode 100644 index 0000000..5e413eb --- /dev/null +++ b/Firearms/The_Experiment_Remake-RollaTroll/README.md @@ -0,0 +1,48 @@ +# The Experiment Remake + +#### Author +RollaTroll + +#Description +Uses .380 ACP and the filled down pin from a thumbtack as a firing pin. + +#### Instructions +You will need to have printed: + +**Name Quantity** +* Barrel 1 +* Body 1 +* Hammer_Body 1 +* Hammer_Slide 1 +* Handle 1 +* Long_Hammer_Slide_Pin 1 +* Short_Hammer_Slide_Pin 1 +* Trigger_Guard 1 +* Trigger_Guide 1 +* Trigger_Spring_Cap 1 +* Trigger_Spring 1 +* Trigger 1 + +You will need to have obtained: + +**Name Quantity** +* M2 Machine Nut 14 +* M2 Machine Screw 14 +* Filled Thumb Tack Pin 1 + + +It is best to file the point of the thumbtack down before you remove it, as the body gives a handle to hold on to or clamp. Make sure you round the tip down to about where it started sloping to a point. To remove the pin from the thumb tack, you could use a wire cutter to clip off unnecessary parts of the plastic casing, then squeeze it with a vice until it starts to crack, then twist with a pair of pliers. Make sure not to bend the pin, or you will have to straighten it later. The pin should have a rib that keeps it from coming out easily, but should also help hold it into the hammer slide. + +Once all parts are printed and hardware gathered, you should start with the Trigger Guard and Body. Fit the guard onto the bottom of the body and screw it together, having the vertical side parallel to the front of the body. Before you put the grip on you will need to fit the trigger in and put the Trigger Spring and Trigger +Spring Cap onto the trigger. You will want to glue the Trigger Spring Cap onto the trigger. You will now need to screw down the trigger guide, just make sure the side that has the overhand is holding in the Trigger Spring. If you do not do this now, you will have to remove the grip later. Once done, you may fit the grip onto the body and line up the 3 holes for the screws, it should sit flush to the trigger guard. The body will be extending forward of the grip. Insert the screws on each side and put the nuts on, tightening it up so it stays rigid. + +You may now fit the Hammer Body in; just make sure the slot is open on the top. As you put it on, fit strong rubber bands on both sides in the set out slots. They should be trapped there and hang loose for now. Screw the Hammer Body in, it should be obvious. + +Fit the Filled Thumb Tack Pin into the Hammer Slide, then fit that into the Body and put the Short Hammer Slide Pin in the front hole, and do the same with the Long Pin in the back hole. You may want to glue them in if they aren't tight on their own. Make sure the pins are close to even in their alignment. The first pin should sit flush to the sides and the long one should sit 10mm out from each side. Now put the rubber bands on their corresponding pins and make sure they'll stay, loop them around it once if necessary. + +You may now fit the barrel into the front slot of the Hammer Body, but don't go shooting yet. If you used any glue in the assembly (which might be wise), then let it dry until it is supposed to be FULLY dry. Once done, you may try to shoot it from afar (e.g. clamp and string). To cock the weapon, pull the Hammer Slide back and down so it fits into the slot set out for it. The quicker you fire it, the better the rubber bands will perform, as they cool down and loose energy when left stretched. + +#### DISCLAIMER + I take no responsibility of any kind for any legal issues, damage, injury or death that may occur due to use of or production of this design. It is untested and is by NO means guaranteed to function. Use common sense and be careful. + +NOTES: Looking back several months after designing it, I now realize that many major parts would be near impossible to print (Body, Hammer Slide, Hammer Body, Trigger, etc.). I may fix some of these problems at some point, but it may be awhile. diff --git a/Firearms/The_Experiment_Remake-RollaTroll/Renders/Assembly_1.jpg b/Firearms/The_Experiment_Remake-RollaTroll/Renders/Assembly_1.jpg new file mode 100644 index 0000000..741f3b9 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/Renders/Assembly_1.jpg differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/Renders/Assembly_2.jpg b/Firearms/The_Experiment_Remake-RollaTroll/Renders/Assembly_2.jpg new file mode 100644 index 0000000..2b9d4a3 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/Renders/Assembly_2.jpg differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/Renders/Assembly_3.jpg b/Firearms/The_Experiment_Remake-RollaTroll/Renders/Assembly_3.jpg new file mode 100644 index 0000000..8dc7ae8 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/Renders/Assembly_3.jpg differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/Renders/Assembly_4.jpg b/Firearms/The_Experiment_Remake-RollaTroll/Renders/Assembly_4.jpg new file mode 100644 index 0000000..9dcf4d0 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/Renders/Assembly_4.jpg differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/Renders/Assembly_5.jpg b/Firearms/The_Experiment_Remake-RollaTroll/Renders/Assembly_5.jpg new file mode 100644 index 0000000..3b9fe22 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/Renders/Assembly_5.jpg differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/Renders/Assembly_6.jpg b/Firearms/The_Experiment_Remake-RollaTroll/Renders/Assembly_6.jpg new file mode 100644 index 0000000..ae72217 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/Renders/Assembly_6.jpg differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Assembly.sldasm b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Assembly.sldasm new file mode 100644 index 0000000..c323da7 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Assembly.sldasm differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Barrel.sldprt b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Barrel.sldprt new file mode 100644 index 0000000..e12e63d Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Barrel.sldprt differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Body.sldprt b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Body.sldprt new file mode 100644 index 0000000..a2152f9 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Body.sldprt differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Grip.sldprt b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Grip.sldprt new file mode 100644 index 0000000..e1fa40c Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Grip.sldprt differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Hammer_Body.sldprt b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Hammer_Body.sldprt new file mode 100644 index 0000000..1ef3050 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Hammer_Body.sldprt differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Hammer_Slide.sldprt b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Hammer_Slide.sldprt new file mode 100644 index 0000000..dccb34a Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Hammer_Slide.sldprt differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Long_Hammer_Slide_Pin.sldprt b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Long_Hammer_Slide_Pin.sldprt new file mode 100644 index 0000000..b98dcb2 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Long_Hammer_Slide_Pin.sldprt differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/M2_Nut.sldprt b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/M2_Nut.sldprt new file mode 100644 index 0000000..eab4f30 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/M2_Nut.sldprt differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/M2_Screw.sldprt b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/M2_Screw.sldprt new file mode 100644 index 0000000..be9fce1 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/M2_Screw.sldprt differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Short_Hammer_Slide_Pin.sldprt b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Short_Hammer_Slide_Pin.sldprt new file mode 100644 index 0000000..13a8f3a Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Short_Hammer_Slide_Pin.sldprt differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Thumb_Tack_Pin_Filled.sldprt b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Thumb_Tack_Pin_Filled.sldprt new file mode 100644 index 0000000..c68f0d9 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Thumb_Tack_Pin_Filled.sldprt differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Trigger.sldprt b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Trigger.sldprt new file mode 100644 index 0000000..9efa5b9 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Trigger.sldprt differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Trigger_Guard.sldprt b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Trigger_Guard.sldprt new file mode 100644 index 0000000..ccff8dd Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Trigger_Guard.sldprt differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Trigger_Guide.sldprt b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Trigger_Guide.sldprt new file mode 100644 index 0000000..febaf64 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Trigger_Guide.sldprt differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Trigger_Spring.sldprt b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Trigger_Spring.sldprt new file mode 100644 index 0000000..5fe374a Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Trigger_Spring.sldprt differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Trigger_Spring_Cap.sldprt b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Trigger_Spring_Cap.sldprt new file mode 100644 index 0000000..3f3ced7 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/SLDPRT/Trigger_Spring_Cap.sldprt differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STEP/Barrel.step b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Barrel.step new file mode 100644 index 0000000..cae33e2 --- /dev/null +++ b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Barrel.step @@ -0,0 +1,605 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Barrel.STEP', + '2013-11-10T07:42:18', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #155, #534, ( #564 ) ) ; +#4 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#5 = ORIENTED_EDGE ( 'NONE', *, *, #68, .T. ) ; +#6 = AXIS2_PLACEMENT_3D ( 'NONE', #562, #559, #557 ) ; +#7 = EDGE_CURVE ( 'NONE', #573, #529, #377, .T. ) ; +#8 = ORIENTED_EDGE ( 'NONE', *, *, #42, .T. ) ; +#9 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 34.84949999999999900 ) ) ; +#10 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11 = AXIS2_PLACEMENT_3D ( 'NONE', #136, #435, #568 ) ; +#12 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 1.836970198721029600E-015, 4.898399999999999600 ) ) ; +#13 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#14 = EDGE_LOOP ( 'NONE', ( #424, #504, #548, #471 ) ) ; +#15 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#16 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.27199999999999800 ) ) ; +#18 = CARTESIAN_POINT ( 'NONE', ( -4.799000000000000400, 0.0000000000000000000, 17.37200000000000000 ) ) ; +#19 = AXIS2_PLACEMENT_3D ( 'NONE', #9, #311, #281 ) ; +#20 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.898399999999999600 ) ) ; +#21 = EDGE_CURVE ( 'NONE', #384, #558, #293, .T. ) ; +#22 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#23 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24 = PLANE ( 'NONE', #327 ) ; +#25 = ORIENTED_EDGE ( 'NONE', *, *, #204, .T. ) ; +#26 = ORIENTED_EDGE ( 'NONE', *, *, #532, .F. ) ; +#27 = EDGE_CURVE ( 'NONE', #443, #461, #376, .T. ) ; +#28 = CARTESIAN_POINT ( 'NONE', ( -4.698999999999999800, 1.206215864820185300E-015, 34.84949999999999900 ) ) ; +#29 = AXIS2_PLACEMENT_3D ( 'NONE', #577, #574, #571 ) ; +#30 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#31 = EDGE_CURVE ( 'NONE', #452, #573, #371, .T. ) ; +#32 = ORIENTED_EDGE ( 'NONE', *, *, #21, .F. ) ; +#33 = AXIS2_PLACEMENT_3D ( 'NONE', #498, #218, #503 ) ; +#34 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#35 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#36 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#37 = VERTEX_POINT ( 'NONE', #181 ) ; +#38 = ADVANCED_FACE ( 'NONE', ( #361 ), #355, .T. ) ; +#39 = AXIS2_PLACEMENT_3D ( 'NONE', #316, #302, #321 ) ; +#40 = EDGE_CURVE ( 'NONE', #443, #390, #378, .T. ) ; +#41 = ADVANCED_FACE ( 'NONE', ( #360 ), #456, .T. ) ; +#42 = EDGE_CURVE ( 'NONE', #511, #484, #353, .T. ) ; +#43 = CARTESIAN_POINT ( 'NONE', ( -4.953000000000000300, 0.0000000000000000000, 17.27199999999999800 ) ) ; +#44 = AXIS2_PLACEMENT_3D ( 'NONE', #394, #91, #307 ) ; +#45 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#46 = EDGE_CURVE ( 'NONE', #390, #429, #354, .T. ) ; +#47 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#48 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#49 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#50 = AXIS2_PLACEMENT_3D ( 'NONE', #411, #468, #475 ) ; +#51 = ORIENTED_EDGE ( 'NONE', *, *, #431, .T. ) ; +#52 = PLANE ( 'NONE', #272 ) ; +#53 = CARTESIAN_POINT ( 'NONE', ( 4.698999999999999800, 5.754615309193413700E-016, 17.37200000000000000 ) ) ; +#54 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000000, 4.898399999999999600 ) ) ; +#55 = ORIENTED_EDGE ( 'NONE', *, *, #587, .F. ) ; +#56 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -15.00000000000000200, 4.898399999999999600 ) ) ; +#57 = AXIS2_PLACEMENT_3D ( 'NONE', #413, #409, #23 ) ; +#58 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 15.00000000000000000, 4.898399999999999600 ) ) ; +#60 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #88, #497, ( #375 ) ) ; +#61 = EDGE_CURVE ( 'NONE', #229, #511, #347, .T. ) ; +#62 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63 = VERTEX_POINT ( 'NONE', #457 ) ; +#64 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000000, 4.898399999999999600 ) ) ; +#65 = AXIS2_PLACEMENT_3D ( 'NONE', #18, #4, #13 ) ; +#66 = ADVANCED_FACE ( 'NONE', ( #357, #338 ), #408, .T. ) ; +#67 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68 = EDGE_CURVE ( 'NONE', #487, #443, #336, .T. ) ; +#69 = ADVANCED_FACE ( 'NONE', ( #337 ), #153, .T. ) ; +#70 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.37200000000000000 ) ) ; +#71 = APPROVAL_DATE_TIME ( #73, #79 ) ; +#72 = ORIENTED_EDGE ( 'NONE', *, *, #40, .F. ) ; +#73 = DATE_AND_TIME ( #74, #75 ) ; +#74 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#75 = LOCAL_TIME ( 17, 42, 18.00000000000000000, #80 ) ; +#76 = AXIS2_PLACEMENT_3D ( 'NONE', #264, #393, #246 ) ; +#77 = ORIENTED_EDGE ( 'NONE', *, *, #587, .T. ) ; +#78 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79 = APPROVAL ( #496, 'UNSPECIFIED' ) ; +#80 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#81 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#82 = APPROVAL_PERSON_ORGANIZATION ( #83, #79, #495 ) ; +#83 = PERSON_AND_ORGANIZATION ( #350, #156 ) ; +#84 = EDGE_CURVE ( 'NONE', #420, #452, #344, .T. ) ; +#85 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#86 = AXIS2_PLACEMENT_3D ( 'NONE', #291, #85, #110 ) ; +#87 = EDGE_CURVE ( 'NONE', #199, #229, #332, .T. ) ; +#88 = DATE_AND_TIME ( #89, #90 ) ; +#89 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#90 = LOCAL_TIME ( 17, 42, 18.00000000000000000, #96 ) ; +#91 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#92 = ORIENTED_EDGE ( 'NONE', *, *, #46, .T. ) ; +#93 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#94 = AXIS2_PLACEMENT_3D ( 'NONE', #169, #231, #78 ) ; +#95 = CARTESIAN_POINT ( 'NONE', ( -4.953000000000000300, 0.0000000000000000000, 17.27199999999999800 ) ) ; +#96 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#97 = PERSON_AND_ORGANIZATION ( #350, #156 ) ; +#98 = PERSON_AND_ORGANIZATION ( #350, #156 ) ; +#99 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#100 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#101 = PERSON_AND_ORGANIZATION ( #350, #156 ) ; +#102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#103 = APPROVAL_DATE_TIME ( #105, #159 ) ; +#104 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 1.836970198721029600E-015, 34.84949999999999900 ) ) ; +#105 = DATE_AND_TIME ( #106, #111 ) ; +#106 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#107 = AXIS2_PLACEMENT_3D ( 'NONE', #401, #365, #356 ) ; +#108 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Barrel', ( #173, #382 ), #482 ) ; +#109 = CC_DESIGN_APPROVAL ( #79, ( #375 ) ) ; +#110 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#111 = LOCAL_TIME ( 17, 42, 18.00000000000000000, #113 ) ; +#112 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#113 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#114 = APPROVAL_PERSON_ORGANIZATION ( #120, #159, #515 ) ; +#115 = ORIENTED_EDGE ( 'NONE', *, *, #339, .F. ) ; +#116 = EDGE_CURVE ( 'NONE', #384, #474, #330, .T. ) ; +#117 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000000, -0.0000000000000000000 ) ) ; +#118 = EDGE_CURVE ( 'NONE', #436, #474, #325, .T. ) ; +#119 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#120 = PERSON_AND_ORGANIZATION ( #350, #156 ) ; +#121 = AXIS2_PLACEMENT_3D ( 'NONE', #10, #2, #1 ) ; +#122 = DATE_AND_TIME ( #124, #132 ) ; +#123 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#124 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#125 = EDGE_CURVE ( 'NONE', #523, #484, #334, .T. ) ; +#126 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000000, 4.898399999999999600 ) ) ; +#127 = ORIENTED_EDGE ( 'NONE', *, *, #217, .F. ) ; +#128 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, 0.0000000000000000000, 40.00000000000000000 ) ) ; +#129 = CC_DESIGN_APPROVAL ( #159, ( #183 ) ) ; +#130 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#131 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#132 = LOCAL_TIME ( 17, 42, 18.00000000000000000, #133 ) ; +#133 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#134 = AXIS2_PLACEMENT_3D ( 'NONE', #222, #447, #444 ) ; +#135 = PERSON_AND_ORGANIZATION ( #350, #156 ) ; +#136 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.27199999999999800 ) ) ; +#137 = CARTESIAN_POINT ( 'NONE', ( -17.44919999999999800, -2.449199999999998000, 4.898399999999999600 ) ) ; +#138 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 34.84949999999999900 ) ) ; +#139 = APPROVAL_DATE_TIME ( #140, #308 ) ; +#140 = DATE_AND_TIME ( #141, #148 ) ; +#141 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#142 = EDGE_LOOP ( 'NONE', ( #428, #51, #383, #469 ) ) ; +#143 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#144 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #122, #522, ( #556 ) ) ; +#145 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#146 = AXIS2_PLACEMENT_3D ( 'NONE', #367, #466, #366 ) ; +#147 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#148 = LOCAL_TIME ( 17, 42, 18.00000000000000000, #150 ) ; +#149 = CC_DESIGN_SECURITY_CLASSIFICATION ( #375, ( #183 ) ) ; +#150 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#151 = APPROVAL_PERSON_ORGANIZATION ( #154, #308, #525 ) ; +#152 = ORIENTED_EDGE ( 'NONE', *, *, #116, .T. ) ; +#153 = PLANE ( 'NONE', #458 ) ; +#154 = PERSON_AND_ORGANIZATION ( #350, #156 ) ; +#155 = PERSON_AND_ORGANIZATION ( #350, #156 ) ; +#156 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#157 = AXIS2_PLACEMENT_3D ( 'NONE', #213, #112, #100 ) ; +#158 = ADVANCED_FACE ( 'NONE', ( #317 ), #24, .F. ) ; +#159 = APPROVAL ( #518, 'UNSPECIFIED' ) ; +#160 = ADVANCED_FACE ( 'NONE', ( #319 ), #52, .F. ) ; +#161 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#162 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 34.84949999999999900 ) ) ; +#163 = PLANE ( 'NONE', #182 ) ; +#164 = ORIENTED_EDGE ( 'NONE', *, *, #42, .F. ) ; +#165 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 1.836970198721029600E-015, 40.00000000000000000 ) ) ; +#166 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#167 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#168 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#169 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 40.00000000000000000 ) ) ; +#170 = SHAPE_DEFINITION_REPRESENTATION ( #228, #108 ) ; +#171 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #564 ) ) ; +#172 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 34.84949999999999900 ) ) ; +#173 = MANIFOLD_SOLID_BREP ( 'Fillet3', #540 ) ; +#174 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #135, #524, ( #556 ) ) ; +#175 = CARTESIAN_POINT ( 'NONE', ( -17.44919999999999800, -14.99999999999999800, 0.0000000000000000000 ) ) ; +#176 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#177 = CIRCLE ( 'NONE', #65, 0.09999999999999939500 ) ; +#178 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#179 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#180 = ORIENTED_EDGE ( 'NONE', *, *, #449, .T. ) ; +#181 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -15.00000000000000200, 4.898399999999999600 ) ) ; +#182 = AXIS2_PLACEMENT_3D ( 'NONE', #166, #147, #145 ) ; +#183 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #564, .NOT_KNOWN. ) ; +#184 = VECTOR ( 'NONE', #34, 1000.000000000000000 ) ; +#185 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -2.017969125134300100E-015, 4.898399999999999600 ) ) ; +#186 = CIRCLE ( 'NONE', #6, 17.44919999999999800 ) ; +#187 = CIRCLE ( 'NONE', #121, 4.953000000000000300 ) ; +#188 = CYLINDRICAL_SURFACE ( 'NONE', #86, 4.953000000000000300 ) ; +#189 = VERTEX_POINT ( 'NONE', #567 ) ; +#190 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, 0.0000000000000000000, 34.84949999999999900 ) ) ; +#191 = AXIS2_PLACEMENT_3D ( 'NONE', #467, #352, #450 ) ; +#192 = CARTESIAN_POINT ( 'NONE', ( -17.44919999999999800, -14.99999999999999800, 4.898399999999999600 ) ) ; +#193 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#194 = CIRCLE ( 'NONE', #29, 15.00000000000000000 ) ; +#195 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#196 = FACE_OUTER_BOUND ( 'NONE', #14, .T. ) ; +#197 = FACE_OUTER_BOUND ( 'NONE', #363, .T. ) ; +#198 = EDGE_CURVE ( 'NONE', #558, #384, #312, .T. ) ; +#199 = VERTEX_POINT ( 'NONE', #364 ) ; +#200 = ADVANCED_FACE ( 'NONE', ( #310 ), #304, .F. ) ; +#201 = CYLINDRICAL_SURFACE ( 'NONE', #44, 4.953000000000000300 ) ; +#202 = TOROIDAL_SURFACE ( 'NONE', #279, 4.799000000000000400, 0.1000000000000000100 ) ; +#203 = LINE ( 'NONE', #56, #212 ) ; +#204 = EDGE_CURVE ( 'NONE', #420, #523, #305, .T. ) ; +#205 = EDGE_LOOP ( 'NONE', ( #493, #460, #180, #478 ) ) ; +#206 = AXIS2_PLACEMENT_3D ( 'NONE', #374, #388, #385 ) ; +#207 = ADVANCED_FACE ( 'NONE', ( #313 ), #299, .T. ) ; +#208 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 34.84949999999999900 ) ) ; +#209 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#210 = LINE ( 'NONE', #54, #184 ) ; +#211 = VECTOR ( 'NONE', #67, 1000.000000000000000 ) ; +#212 = VECTOR ( 'NONE', #62, 1000.000000000000000 ) ; +#213 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 40.00000000000000000 ) ) ; +#214 = ORIENTED_EDGE ( 'NONE', *, *, #7, .T. ) ; +#215 = AXIS2_PLACEMENT_3D ( 'NONE', #138, #130, #179 ) ; +#216 = VECTOR ( 'NONE', #93, 1000.000000000000000 ) ; +#217 = EDGE_CURVE ( 'NONE', #420, #565, #301, .T. ) ; +#218 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#219 = CYLINDRICAL_SURFACE ( 'NONE', #157, 15.00000000000000000 ) ; +#220 = CIRCLE ( 'NONE', #255, 5.150500000000002700 ) ; +#221 = ORIENTED_EDGE ( 'NONE', *, *, #21, .T. ) ; +#222 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000000, 4.898399999999999600 ) ) ; +#223 = AXIS2_PLACEMENT_3D ( 'NONE', #569, #16, #45 ) ; +#224 = FACE_OUTER_BOUND ( 'NONE', #430, .T. ) ; +#225 = CARTESIAN_POINT ( 'NONE', ( 4.953000000000000300, 6.065675596176840400E-016, 17.27199999999999800 ) ) ; +#226 = LINE ( 'NONE', #95, #216 ) ; +#227 = VECTOR ( 'NONE', #119, 1000.000000000000000 ) ; +#228 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #556 ) ; +#229 = VERTEX_POINT ( 'NONE', #333 ) ; +#230 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#231 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#232 = LINE ( 'NONE', #126, #227 ) ; +#233 = TOROIDAL_SURFACE ( 'NONE', #215, 9.849499999999999000, 5.150500000000001000 ) ; +#234 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.37200000000000000 ) ) ; +#235 = FACE_OUTER_BOUND ( 'NONE', #205, .T. ) ; +#236 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#237 = ORIENTED_EDGE ( 'NONE', *, *, #483, .F. ) ; +#238 = EDGE_CURVE ( 'NONE', #529, #565, #303, .T. ) ; +#239 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.449199999999996700, 4.898399999999999600 ) ) ; +#240 = AXIS2_PLACEMENT_3D ( 'NONE', #359, #553, #459 ) ; +#241 = CARTESIAN_POINT ( 'NONE', ( -17.44919999999999800, -2.449199999999998000, 0.0000000000000000000 ) ) ; +#242 = CARTESIAN_POINT ( 'NONE', ( 4.698999999999999800, 0.0000000000000000000, 34.84949999999999900 ) ) ; +#243 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#244 = FACE_OUTER_BOUND ( 'NONE', #453, .T. ) ; +#245 = FACE_OUTER_BOUND ( 'NONE', #415, .T. ) ; +#246 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#247 = LINE ( 'NONE', #117, #211 ) ; +#248 = ORIENTED_EDGE ( 'NONE', *, *, #46, .F. ) ; +#249 = ORIENTED_EDGE ( 'NONE', *, *, #84, .T. ) ; +#250 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, 0.0000000000000000000, 4.898399999999999600 ) ) ; +#251 = CIRCLE ( 'NONE', #433, 4.698999999999999800 ) ; +#252 = VECTOR ( 'NONE', #195, 1000.000000000000000 ) ; +#253 = CARTESIAN_POINT ( 'NONE', ( 9.849499999999999000, 0.0000000000000000000, 34.84949999999999900 ) ) ; +#254 = CIRCLE ( 'NONE', #400, 15.00000000000000000 ) ; +#255 = AXIS2_PLACEMENT_3D ( 'NONE', #253, #102, #99 ) ; +#256 = ORIENTED_EDGE ( 'NONE', *, *, #238, .F. ) ; +#257 = ADVANCED_FACE ( 'NONE', ( #296 ), #379, .F. ) ; +#258 = EDGE_CURVE ( 'NONE', #63, #372, #290, .T. ) ; +#259 = ADVANCED_FACE ( 'NONE', ( #314 ), #283, .F. ) ; +#260 = VECTOR ( 'NONE', #178, 1000.000000000000000 ) ; +#261 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#262 = LINE ( 'NONE', #192, #252 ) ; +#263 = LINE ( 'NONE', #185, #260 ) ; +#264 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.27199999999999800 ) ) ; +#265 = EDGE_CURVE ( 'NONE', #427, #511, #289, .T. ) ; +#266 = CARTESIAN_POINT ( 'NONE', ( -17.44919999999999800, -14.99999999999999800, 4.898399999999999600 ) ) ; +#267 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -2.449199999999998900, 4.898399999999999600 ) ) ; +#268 = FACE_BOUND ( 'NONE', #560, .T. ) ; +#269 = CIRCLE ( 'NONE', #373, 4.698999999999999800 ) ; +#270 = CIRCLE ( 'NONE', #507, 17.44919999999999800 ) ; +#271 = CARTESIAN_POINT ( 'NONE', ( -17.44919999999999800, -2.449199999999994500, 4.898399999999999600 ) ) ; +#272 = AXIS2_PLACEMENT_3D ( 'NONE', #418, #579, #584 ) ; +#273 = VECTOR ( 'NONE', #261, 1000.000000000000000 ) ; +#274 = CIRCLE ( 'NONE', #473, 4.698999999999999800 ) ; +#275 = FACE_OUTER_BOUND ( 'NONE', #421, .T. ) ; +#276 = CIRCLE ( 'NONE', #76, 4.799000000000000400 ) ; +#277 = LINE ( 'NONE', #287, #273 ) ; +#278 = TOROIDAL_SURFACE ( 'NONE', #19, 9.849499999999999000, 5.150500000000001000 ) ; +#279 = AXIS2_PLACEMENT_3D ( 'NONE', #70, #35, #58 ) ; +#280 = EDGE_CURVE ( 'NONE', #565, #487, #284, .T. ) ; +#281 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#282 = TOROIDAL_SURFACE ( 'NONE', #586, 4.799000000000000400, 0.1000000000000000100 ) ; +#283 = CYLINDRICAL_SURFACE ( 'NONE', #544, 4.698999999999999800 ) ; +#284 = CIRCLE ( 'NONE', #39, 15.00000000000000000 ) ; +#285 = VECTOR ( 'NONE', #36, 1000.000000000000000 ) ; +#286 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #555, 'distance_accuracy_value', 'NONE'); +#287 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -2.017969125134300100E-015, 0.0000000000000000000 ) ) ; +#288 = AXIS2_PLACEMENT_3D ( 'NONE', #20, #22, #123 ) ; +#289 = LINE ( 'NONE', #328, #285 ) ; +#290 = LINE ( 'NONE', #341, #298 ) ; +#291 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.27199999999999800 ) ) ; +#292 = FACE_OUTER_BOUND ( 'NONE', #446, .T. ) ; +#293 = CIRCLE ( 'NONE', #223, 4.953000000000000300 ) ; +#294 = ADVANCED_FACE ( 'NONE', ( #292 ), #282, .T. ) ; +#295 = CC_DESIGN_APPROVAL ( #308, ( #556 ) ) ; +#296 = FACE_OUTER_BOUND ( 'NONE', #537, .T. ) ; +#297 = ADVANCED_FACE ( 'NONE', ( #275 ), #278, .T. ) ; +#298 = VECTOR ( 'NONE', #15, 1000.000000000000000 ) ; +#299 = CYLINDRICAL_SURFACE ( 'NONE', #57, 17.44919999999999800 ) ; +#300 = AXIS2_PLACEMENT_3D ( 'NONE', #17, #47, #510 ) ; +#301 = LINE ( 'NONE', #128, #322 ) ; +#302 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#303 = CIRCLE ( 'NONE', #146, 15.00000000000000000 ) ; +#304 = CYLINDRICAL_SURFACE ( 'NONE', #240, 4.698999999999999800 ) ; +#305 = CIRCLE ( 'NONE', #206, 5.150500000000001000 ) ; +#306 = ORIENTED_EDGE ( 'NONE', *, *, #545, .F. ) ; +#307 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#308 = APPROVAL ( #528, 'UNSPECIFIED' ) ; +#309 = EDGE_CURVE ( 'NONE', #63, #189, #277, .T. ) ; +#310 = FACE_OUTER_BOUND ( 'NONE', #142, .T. ) ; +#311 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#312 = CIRCLE ( 'NONE', #300, 4.953000000000000300 ) ; +#313 = FACE_OUTER_BOUND ( 'NONE', #445, .T. ) ; +#314 = FACE_OUTER_BOUND ( 'NONE', #391, .T. ) ; +#315 = EDGE_CURVE ( 'NONE', #229, #199, #276, .T. ) ; +#316 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.898399999999999600 ) ) ; +#317 = FACE_OUTER_BOUND ( 'NONE', #512, .T. ) ; +#318 = VECTOR ( 'NONE', #343, 1000.000000000000000 ) ; +#319 = FACE_OUTER_BOUND ( 'NONE', #439, .T. ) ; +#320 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#321 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#322 = VECTOR ( 'NONE', #49, 1000.000000000000000 ) ; +#323 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.37200000000000000 ) ) ; +#324 = VECTOR ( 'NONE', #419, 1000.000000000000000 ) ; +#325 = CIRCLE ( 'NONE', #389, 4.953000000000000300 ) ; +#326 = EDGE_LOOP ( 'NONE', ( #249, #550, #472, #455, #127 ) ) ; +#327 = AXIS2_PLACEMENT_3D ( 'NONE', #417, #588, #81 ) ; +#328 = CARTESIAN_POINT ( 'NONE', ( 4.698999999999999800, 5.754615309193413700E-016, 40.00100000000000500 ) ) ; +#329 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 34.84949999999999900 ) ) ; +#330 = LINE ( 'NONE', #476, #324 ) ; +#331 = CARTESIAN_POINT ( 'NONE', ( -4.698999999999999800, 0.0000000000000000000, 17.37200000000000000 ) ) ; +#332 = CIRCLE ( 'NONE', #491, 4.799000000000000400 ) ; +#333 = CARTESIAN_POINT ( 'NONE', ( 4.799000000000000400, 5.877079989108149200E-016, 17.27199999999999800 ) ) ; +#334 = LINE ( 'NONE', #542, #318 ) ; +#335 = CARTESIAN_POINT ( 'NONE', ( 4.953000000000000300, 6.065675596176840400E-016, 0.0000000000000000000 ) ) ; +#336 = CIRCLE ( 'NONE', #33, 17.44919999999999800 ) ; +#337 = FACE_OUTER_BOUND ( 'NONE', #414, .T. ) ; +#338 = FACE_OUTER_BOUND ( 'NONE', #422, .T. ) ; +#339 = EDGE_CURVE ( 'NONE', #372, #487, #270, .T. ) ; +#340 = ORIENTED_EDGE ( 'NONE', *, *, #346, .F. ) ; +#341 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -2.449199999999998900, 0.0000000000000000000 ) ) ; +#342 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#343 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#344 = CIRCLE ( 'NONE', #578, 15.00000000000000000 ) ; +#345 = VECTOR ( 'NONE', #402, 1000.000000000000000 ) ; +#346 = EDGE_CURVE ( 'NONE', #484, #511, #274, .T. ) ; +#347 = CIRCLE ( 'NONE', #50, 0.1000000000000002600 ) ; +#348 = ORIENTED_EDGE ( 'NONE', *, *, #238, .T. ) ; +#349 = DESIGN_CONTEXT ( 'detailed design', #533, 'design' ) ; +#350 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#351 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#352 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#353 = CIRCLE ( 'NONE', #191, 4.698999999999999800 ) ; +#354 = LINE ( 'NONE', #470, #345 ) ; +#355 = CYLINDRICAL_SURFACE ( 'NONE', #94, 15.00000000000000000 ) ; +#356 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#357 = FACE_BOUND ( 'NONE', #488, .T. ) ; +#358 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #101, #514, ( #183 ) ) ; +#359 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 40.00100000000000500 ) ) ; +#360 = FACE_OUTER_BOUND ( 'NONE', #412, .T. ) ; +#361 = FACE_OUTER_BOUND ( 'NONE', #326, .T. ) ; +#362 = VECTOR ( 'NONE', #131, 1000.000000000000000 ) ; +#363 = EDGE_LOOP ( 'NONE', ( #513, #585, #526, #164 ) ) ; +#364 = CARTESIAN_POINT ( 'NONE', ( -4.799000000000000400, 0.0000000000000000000, 17.27199999999999800 ) ) ; +#365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#366 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#367 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.898399999999999600 ) ) ; +#368 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#369 = VECTOR ( 'NONE', #425, 1000.000000000000000 ) ; +#370 = VECTOR ( 'NONE', #48, 1000.000000000000000 ) ; +#371 = LINE ( 'NONE', #165, #362 ) ; +#372 = VERTEX_POINT ( 'NONE', #267 ) ; +#373 = AXIS2_PLACEMENT_3D ( 'NONE', #208, #193, #209 ) ; +#374 = CARTESIAN_POINT ( 'NONE', ( -9.849499999999999000, 1.206215864820185300E-015, 34.84949999999999900 ) ) ; +#375 = SECURITY_CLASSIFICATION ( '', '', #506 ) ; +#376 = LINE ( 'NONE', #576, #370 ) ; +#377 = CIRCLE ( 'NONE', #288, 15.00000000000000000 ) ; +#378 = LINE ( 'NONE', #271, #369 ) ; +#379 = PLANE ( 'NONE', #107 ) ; +#380 = EDGE_CURVE ( 'NONE', #523, #427, #269, .T. ) ; +#381 = ORIENTED_EDGE ( 'NONE', *, *, #40, .T. ) ; +#382 = AXIS2_PLACEMENT_3D ( 'NONE', #583, #581, #538 ) ; +#383 = ORIENTED_EDGE ( 'NONE', *, *, #125, .T. ) ; +#384 = VERTEX_POINT ( 'NONE', #225 ) ; +#385 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.224646799147352700E-016, 0.0000000000000000000 ) ) ; +#386 = ORIENTED_EDGE ( 'NONE', *, *, #410, .T. ) ; +#387 = ORIENTED_EDGE ( 'NONE', *, *, #442, .F. ) ; +#388 = DIRECTION ( 'NONE', ( 1.224646799147353200E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#389 = AXIS2_PLACEMENT_3D ( 'NONE', #451, #500, #176 ) ; +#390 = VERTEX_POINT ( 'NONE', #241 ) ; +#391 = EDGE_LOOP ( 'NONE', ( #572, #464, #8, #563 ) ) ; +#392 = ORIENTED_EDGE ( 'NONE', *, *, #339, .T. ) ; +#393 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#394 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.27199999999999800 ) ) ; +#395 = ORIENTED_EDGE ( 'NONE', *, *, #545, .T. ) ; +#396 = ORIENTED_EDGE ( 'NONE', *, *, #516, .T. ) ; +#397 = ORIENTED_EDGE ( 'NONE', *, *, #566, .T. ) ; +#398 = ORIENTED_EDGE ( 'NONE', *, *, #442, .T. ) ; +#399 = EDGE_CURVE ( 'NONE', #372, #37, #263, .T. ) ; +#400 = AXIS2_PLACEMENT_3D ( 'NONE', #172, #167, #168 ) ; +#401 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.898399999999999600 ) ) ; +#402 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#403 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #97, #505, ( #375 ) ) ; +#404 = ORIENTED_EDGE ( 'NONE', *, *, #217, .T. ) ; +#405 = ORIENTED_EDGE ( 'NONE', *, *, #309, .F. ) ; +#406 = ORIENTED_EDGE ( 'NONE', *, *, #87, .T. ) ; +#407 = ORIENTED_EDGE ( 'NONE', *, *, #399, .T. ) ; +#408 = PLANE ( 'NONE', #11 ) ; +#409 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#410 = EDGE_CURVE ( 'NONE', #461, #429, #262, .T. ) ; +#411 = CARTESIAN_POINT ( 'NONE', ( 4.799000000000000400, 5.877079989108149200E-016, 17.37200000000000000 ) ) ; +#412 = EDGE_LOOP ( 'NONE', ( #237, #501, #398, #396, #386 ) ) ; +#413 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.449199999999996700, 0.0000000000000000000 ) ) ; +#414 = EDGE_LOOP ( 'NONE', ( #405, #575, #407, #477 ) ) ; +#415 = EDGE_LOOP ( 'NONE', ( #582, #547, #404, #256, #521 ) ) ; +#416 = EDGE_CURVE ( 'NONE', #452, #420, #254, .T. ) ; +#417 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.898399999999999600 ) ) ; +#418 = CARTESIAN_POINT ( 'NONE', ( -17.44919999999999800, 2.017969125134300100E-015, 4.898399999999999600 ) ) ; +#419 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#420 = VERTEX_POINT ( 'NONE', #190 ) ; +#421 = EDGE_LOOP ( 'NONE', ( #539, #25, #535, #437 ) ) ; +#422 = EDGE_LOOP ( 'NONE', ( #481, #221 ) ) ; +#423 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#424 = ORIENTED_EDGE ( 'NONE', *, *, #116, .F. ) ; +#425 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#426 = ORIENTED_EDGE ( 'NONE', *, *, #280, .T. ) ; +#427 = VERTEX_POINT ( 'NONE', #242 ) ; +#428 = ORIENTED_EDGE ( 'NONE', *, *, #265, .F. ) ; +#429 = VERTEX_POINT ( 'NONE', #175 ) ; +#430 = EDGE_LOOP ( 'NONE', ( #32, #152, #395, #454 ) ) ; +#431 = EDGE_CURVE ( 'NONE', #427, #523, #251, .T. ) ; +#432 = ADVANCED_FACE ( 'NONE', ( #268, #244 ), #163, .F. ) ; +#433 = AXIS2_PLACEMENT_3D ( 'NONE', #162, #161, #143 ) ; +#434 = ORIENTED_EDGE ( 'NONE', *, *, #483, .T. ) ; +#435 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#436 = VERTEX_POINT ( 'NONE', #549 ) ; +#437 = ORIENTED_EDGE ( 'NONE', *, *, #449, .F. ) ; +#438 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #98, #509, ( #183 ) ) ; +#439 = EDGE_LOOP ( 'NONE', ( #561, #381, #92, #494 ) ) ; +#440 = ADVANCED_FACE ( 'NONE', ( #235 ), #233, .T. ) ; +#441 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.27199999999999800 ) ) ; +#442 = EDGE_CURVE ( 'NONE', #37, #529, #232, .T. ) ; +#443 = VERTEX_POINT ( 'NONE', #137 ) ; +#444 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#445 = EDGE_LOOP ( 'NONE', ( #485, #55, #72, #499, #115 ) ) ; +#446 = EDGE_LOOP ( 'NONE', ( #520, #527, #340, #26 ) ) ; +#447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#448 = ADVANCED_FACE ( 'NONE', ( #245 ), #219, .T. ) ; +#449 = EDGE_CURVE ( 'NONE', #452, #427, #220, .T. ) ; +#450 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#451 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#452 = VERTEX_POINT ( 'NONE', #104 ) ; +#453 = EDGE_LOOP ( 'NONE', ( #248, #77, #502, #434 ) ) ; +#454 = ORIENTED_EDGE ( 'NONE', *, *, #480, .F. ) ; +#455 = ORIENTED_EDGE ( 'NONE', *, *, #280, .F. ) ; +#456 = PLANE ( 'NONE', #134 ) ; +#457 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -2.449199999999998900, 0.0000000000000000000 ) ) ; +#458 = AXIS2_PLACEMENT_3D ( 'NONE', #465, #517, #519 ) ; +#459 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#460 = ORIENTED_EDGE ( 'NONE', *, *, #416, .F. ) ; +#461 = VERTEX_POINT ( 'NONE', #266 ) ; +#462 = ORIENTED_EDGE ( 'NONE', *, *, #27, .T. ) ; +#463 = ORIENTED_EDGE ( 'NONE', *, *, #516, .F. ) ; +#464 = ORIENTED_EDGE ( 'NONE', *, *, #265, .T. ) ; +#465 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -2.017969125134300100E-015, 4.898399999999999600 ) ) ; +#466 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#467 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.37200000000000000 ) ) ; +#468 = DIRECTION ( 'NONE', ( -1.224646799147353200E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#469 = ORIENTED_EDGE ( 'NONE', *, *, #346, .T. ) ; +#470 = CARTESIAN_POINT ( 'NONE', ( -17.44919999999999800, 2.017969125134300100E-015, -0.0000000000000000000 ) ) ; +#471 = ORIENTED_EDGE ( 'NONE', *, *, #118, .T. ) ; +#472 = ORIENTED_EDGE ( 'NONE', *, *, #566, .F. ) ; +#473 = AXIS2_PLACEMENT_3D ( 'NONE', #234, #30, #230 ) ; +#474 = VERTEX_POINT ( 'NONE', #335 ) ; +#475 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.224646799147353200E-016, 0.0000000000000000000 ) ) ; +#476 = CARTESIAN_POINT ( 'NONE', ( 4.953000000000000300, 6.065675596176840400E-016, 17.27199999999999800 ) ) ; +#477 = ORIENTED_EDGE ( 'NONE', *, *, #508, .T. ) ; +#478 = ORIENTED_EDGE ( 'NONE', *, *, #380, .F. ) ; +#479 = ORIENTED_EDGE ( 'NONE', *, *, #315, .T. ) ; +#480 = EDGE_CURVE ( 'NONE', #558, #436, #226, .T. ) ; +#481 = ORIENTED_EDGE ( 'NONE', *, *, #198, .T. ) ; +#482 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #286 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #555, #554, #546 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#483 = EDGE_CURVE ( 'NONE', #189, #429, #247, .T. ) ; +#484 = VERTEX_POINT ( 'NONE', #331 ) ; +#485 = ORIENTED_EDGE ( 'NONE', *, *, #258, .F. ) ; +#486 = ADVANCED_FACE ( 'NONE', ( #224 ), #201, .F. ) ; +#487 = VERTEX_POINT ( 'NONE', #59 ) ; +#488 = EDGE_LOOP ( 'NONE', ( #406, #479 ) ) ; +#489 = ADVANCED_FACE ( 'NONE', ( #197 ), #202, .T. ) ; +#490 = ADVANCED_FACE ( 'NONE', ( #196 ), #188, .F. ) ; +#491 = AXIS2_PLACEMENT_3D ( 'NONE', #441, #551, #552 ) ; +#492 = ORIENTED_EDGE ( 'NONE', *, *, #399, .F. ) ; +#493 = ORIENTED_EDGE ( 'NONE', *, *, #204, .F. ) ; +#494 = ORIENTED_EDGE ( 'NONE', *, *, #410, .F. ) ; +#495 = APPROVAL_ROLE ( '' ) ; +#496 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#497 = DATE_TIME_ROLE ( 'classification_date' ) ; +#498 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.449199999999996700, 4.898399999999999600 ) ) ; +#499 = ORIENTED_EDGE ( 'NONE', *, *, #68, .F. ) ; +#500 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#501 = ORIENTED_EDGE ( 'NONE', *, *, #508, .F. ) ; +#502 = ORIENTED_EDGE ( 'NONE', *, *, #309, .T. ) ; +#503 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#504 = ORIENTED_EDGE ( 'NONE', *, *, #198, .F. ) ; +#505 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#506 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#507 = AXIS2_PLACEMENT_3D ( 'NONE', #239, #236, #243 ) ; +#508 = EDGE_CURVE ( 'NONE', #37, #189, #203, .T. ) ; +#509 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#510 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#511 = VERTEX_POINT ( 'NONE', #53 ) ; +#512 = EDGE_LOOP ( 'NONE', ( #492, #392, #397, #214, #387 ) ) ; +#513 = ORIENTED_EDGE ( 'NONE', *, *, #61, .F. ) ; +#514 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#515 = APPROVAL_ROLE ( '' ) ; +#516 = EDGE_CURVE ( 'NONE', #529, #461, #210, .T. ) ; +#517 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.156482317317871500E-016, 0.0000000000000000000 ) ) ; +#518 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#519 = DIRECTION ( 'NONE', ( 1.156482317317871500E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#520 = ORIENTED_EDGE ( 'NONE', *, *, #315, .F. ) ; +#521 = ORIENTED_EDGE ( 'NONE', *, *, #7, .F. ) ; +#522 = DATE_TIME_ROLE ( 'creation_date' ) ; +#523 = VERTEX_POINT ( 'NONE', #28 ) ; +#524 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#525 = APPROVAL_ROLE ( '' ) ; +#526 = ORIENTED_EDGE ( 'NONE', *, *, #532, .T. ) ; +#527 = ORIENTED_EDGE ( 'NONE', *, *, #61, .T. ) ; +#528 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#529 = VERTEX_POINT ( 'NONE', #64 ) ; +#530 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#531 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #533 ) ; +#532 = EDGE_CURVE ( 'NONE', #199, #484, #177, .T. ) ; +#533 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#534 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#535 = ORIENTED_EDGE ( 'NONE', *, *, #431, .F. ) ; +#536 = MECHANICAL_CONTEXT ( 'NONE', #541, 'mechanical' ) ; +#537 = EDGE_LOOP ( 'NONE', ( #348, #426, #5, #462, #463 ) ) ; +#538 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#539 = ORIENTED_EDGE ( 'NONE', *, *, #84, .F. ) ; +#540 = CLOSED_SHELL ( 'NONE', ( #294, #259, #486, #297, #38, #207, #448, #440, #432, #490, #66, #200, #489, #41, #160, #257, #69, #158 ) ) ; +#541 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#542 = CARTESIAN_POINT ( 'NONE', ( -4.698999999999999800, 0.0000000000000000000, 40.00100000000000500 ) ) ; +#543 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #541 ) ; +#544 = AXIS2_PLACEMENT_3D ( 'NONE', #580, #351, #368 ) ; +#545 = EDGE_CURVE ( 'NONE', #474, #436, #187, .T. ) ; +#546 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#547 = ORIENTED_EDGE ( 'NONE', *, *, #416, .T. ) ; +#548 = ORIENTED_EDGE ( 'NONE', *, *, #480, .T. ) ; +#549 = CARTESIAN_POINT ( 'NONE', ( -4.953000000000000300, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#550 = ORIENTED_EDGE ( 'NONE', *, *, #31, .T. ) ; +#551 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#552 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#553 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#554 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#555 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#556 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #183, #349 ) ; +#557 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#558 = VERTEX_POINT ( 'NONE', #43 ) ; +#559 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#560 = EDGE_LOOP ( 'NONE', ( #570, #306 ) ) ; +#561 = ORIENTED_EDGE ( 'NONE', *, *, #27, .F. ) ; +#562 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.449199999999996700, 0.0000000000000000000 ) ) ; +#563 = ORIENTED_EDGE ( 'NONE', *, *, #125, .F. ) ; +#564 = PRODUCT ( 'Barrel', 'Barrel', '', ( #536 ) ) ; +#565 = VERTEX_POINT ( 'NONE', #250 ) ; +#566 = EDGE_CURVE ( 'NONE', #487, #573, #194, .T. ) ; +#567 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -15.00000000000000200, 0.0000000000000000000 ) ) ; +#568 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#569 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.27199999999999800 ) ) ; +#570 = ORIENTED_EDGE ( 'NONE', *, *, #118, .F. ) ; +#571 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#572 = ORIENTED_EDGE ( 'NONE', *, *, #380, .T. ) ; +#573 = VERTEX_POINT ( 'NONE', #12 ) ; +#574 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#575 = ORIENTED_EDGE ( 'NONE', *, *, #258, .T. ) ; +#576 = CARTESIAN_POINT ( 'NONE', ( -17.44919999999999800, 2.017969125134300100E-015, 4.898399999999999600 ) ) ; +#577 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.898399999999999600 ) ) ; +#578 = AXIS2_PLACEMENT_3D ( 'NONE', #329, #423, #530 ) ; +#579 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.156482317317871500E-016, 0.0000000000000000000 ) ) ; +#580 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 40.00100000000000500 ) ) ; +#581 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#582 = ORIENTED_EDGE ( 'NONE', *, *, #31, .F. ) ; +#583 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#584 = DIRECTION ( 'NONE', ( 1.156482317317871500E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#585 = ORIENTED_EDGE ( 'NONE', *, *, #87, .F. ) ; +#586 = AXIS2_PLACEMENT_3D ( 'NONE', #323, #342, #320 ) ; +#587 = EDGE_CURVE ( 'NONE', #390, #63, #186, .T. ) ; +#588 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STEP/Body.step b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Body.step new file mode 100644 index 0000000..e717d5e --- /dev/null +++ b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Body.step @@ -0,0 +1,5852 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Body.STEP', + '2013-11-10T07:42:40', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = CARTESIAN_POINT ( 'NONE', ( 37.50099999999998300, -25.50000000000000400, 42.49999999999999300 ) ) ; +#2 = ORIENTED_EDGE ( 'NONE', *, *, #2322, .F. ) ; +#3 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#4 = CIRCLE ( 'NONE', #5106, 1.250000000000002000 ) ; +#5 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000003600, 11.91908102040231800, 15.68682738302479700 ) ) ; +#6 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.673617379884035500E-017, -1.000000000000000000 ) ) ; +#7 = EDGE_CURVE ( 'NONE', #3537, #2686, #91, .T. ) ; +#8 = FACE_OUTER_BOUND ( 'NONE', #2317, .T. ) ; +#9 = EDGE_CURVE ( 'NONE', #771, #2325, #2251, .T. ) ; +#10 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000007800, -7.500000000000009800, 77.50000000000001400 ) ) ; +#11 = FACE_OUTER_BOUND ( 'NONE', #3116, .T. ) ; +#12 = LINE ( 'NONE', #705, #4449 ) ; +#13 = CARTESIAN_POINT ( 'NONE', ( 33.85478694897838600, -5.272183019271820600, 77.10676345234497800 ) ) ; +#14 = ADVANCED_FACE ( 'NONE', ( #1241 ), #3251, .T. ) ; +#15 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999996400, -18.74999999999998200, 75.00000000000001400 ) ) ; +#16 = LINE ( 'NONE', #5119, #140 ) ; +#17 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1279, #3840, #2633, #3072 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 1.570796326794897200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#18 = CARTESIAN_POINT ( 'NONE', ( 0.0007878165456794853200, -15.82323601702590200, 75.07191478294237200 ) ) ; +#19 = EDGE_CURVE ( 'NONE', #495, #1597, #4401, .T. ) ; +#20 = VERTEX_POINT ( 'NONE', #3551 ) ; +#21 = AXIS2_PLACEMENT_3D ( 'NONE', #513, #3526, #951 ) ; +#22 = CIRCLE ( 'NONE', #1495, 5.050800000000001500 ) ; +#23 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#24 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 1, ( + ( #3044, #1315 ), + ( #467, #3469 ), + ( #897, #3903 ), + ( #1335, #4335 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 1.000000000000000000), + ( 0.8047378541243649400, 0.8047378541243649400), + ( 0.8047378541243649400, 0.8047378541243649400), + ( 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#25 = AXIS2_PLACEMENT_3D ( 'NONE', #2128, #4701, #1691 ) ; +#26 = FACE_OUTER_BOUND ( 'NONE', #5351, .T. ) ; +#27 = AXIS2_PLACEMENT_3D ( 'NONE', #2512, #4237, #1653 ) ; +#28 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999997900, -16.25000000000000700, 77.50000000000001400 ) ) ; +#29 = ORIENTED_EDGE ( 'NONE', *, *, #598, .T. ) ; +#30 = CARTESIAN_POINT ( 'NONE', ( 9.198777807181703700E-016, 12.72397244724781700, 67.05114926534605500 ) ) ; +#31 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -7.500000000000009800, 75.00000000000001400 ) ) ; +#32 = EDGE_LOOP ( 'NONE', ( #4154, #1472, #2122 ) ) ; +#33 = EDGE_CURVE ( 'NONE', #5250, #5385, #1100, .T. ) ; +#34 = ORIENTED_EDGE ( 'NONE', *, *, #3006, .T. ) ; +#35 = EDGE_CURVE ( 'NONE', #3256, #2995, #5487, .T. ) ; +#36 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37 = ADVANCED_FACE ( 'NONE', ( #2116, #3388 ), #3069, .F. ) ; +#38 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#39 = VERTEX_POINT ( 'NONE', #3441 ) ; +#40 = ORIENTED_EDGE ( 'NONE', *, *, #439, .T. ) ; +#41 = ORIENTED_EDGE ( 'NONE', *, *, #3063, .T. ) ; +#42 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -12.55080000000001000, 22.10328947826994300 ) ) ; +#43 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -24.99999999999997900, 69.95000000000001700 ) ) ; +#44 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#45 = CYLINDRICAL_SURFACE ( 'NONE', #5218, 2.500000000000002200 ) ; +#46 = ORIENTED_EDGE ( 'NONE', *, *, #1872, .F. ) ; +#47 = VERTEX_POINT ( 'NONE', #2860 ) ; +#48 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.00000000000001200, 75.00000000000001400 ) ) ; +#49 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 14.99999999999999600, 40.00000000000001400 ) ) ; +#50 = EDGE_LOOP ( 'NONE', ( #1468, #3555, #3678, #1944 ) ) ; +#51 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#52 = VECTOR ( 'NONE', #2567, 1000.000000000000000 ) ; +#53 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, -35.00000000000000700, 72.50000000000001400 ) ) ; +#54 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -12.55080000000001000, 22.10328947826994300 ) ) ; +#55 = ORIENTED_EDGE ( 'NONE', *, *, #1190, .T. ) ; +#56 = AXIS2_PLACEMENT_3D ( 'NONE', #1905, #1887, #1814 ) ; +#57 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.500000000000003600, 72.05080000000001000 ) ) ; +#58 = EDGE_LOOP ( 'NONE', ( #3475, #2416, #498, #1207 ) ) ; +#59 = VECTOR ( 'NONE', #438, 1000.000000000000000 ) ; +#60 = AXIS2_PLACEMENT_3D ( 'NONE', #2428, #5376, #2857 ) ; +#61 = ORIENTED_EDGE ( 'NONE', *, *, #3664, .T. ) ; +#62 = ORIENTED_EDGE ( 'NONE', *, *, #1377, .F. ) ; +#63 = VECTOR ( 'NONE', #899, 1000.000000000000000 ) ; +#64 = ORIENTED_EDGE ( 'NONE', *, *, #2646, .F. ) ; +#65 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.00000000000000000, 67.55000000000001100 ) ) ; +#66 = AXIS2_PLACEMENT_3D ( 'NONE', #1913, #4912, #2354 ) ; +#67 = ADVANCED_FACE ( 'NONE', ( #5361 ), #5236, .F. ) ; +#68 = LINE ( 'NONE', #532, #2363 ) ; +#69 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, -15.00000000000000900, 77.50000000000001400 ) ) ; +#70 = EDGE_CURVE ( 'NONE', #1881, #2060, #1976, .T. ) ; +#71 = DIRECTION ( 'NONE', ( -2.449293598294553600E-016, 1.000000000000000000, -8.551662891793383000E-031 ) ) ; +#72 = PERSON_AND_ORGANIZATION ( #5121, #5438 ) ; +#73 = FACE_OUTER_BOUND ( 'NONE', #1036, .T. ) ; +#74 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -8.749999999999989300, 75.00000000000001400 ) ) ; +#75 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 0.4435458000010756900, 2.500000008594814200 ) ) ; +#76 = CYLINDRICAL_SURFACE ( 'NONE', #1070, 3.189999999999998600 ) ; +#77 = EDGE_CURVE ( 'NONE', #325, #4698, #3113, .T. ) ; +#78 = ORIENTED_EDGE ( 'NONE', *, *, #1694, .F. ) ; +#79 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.665334536937734500E-014, 1.665334536937733200E-014 ) ) ; +#80 = CIRCLE ( 'NONE', #2257, 2.500000000000002200 ) ; +#81 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9961946980917455500, 0.08715574274765870700 ) ) ; +#82 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#83 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, -15.00000000000000900, 78.75000000000001400 ) ) ; +#84 = CYLINDRICAL_SURFACE ( 'NONE', #732, 3.189999999999998600 ) ; +#85 = EDGE_CURVE ( 'NONE', #655, #2755, #830, .T. ) ; +#86 = CARTESIAN_POINT ( 'NONE', ( 2.168404344971008900E-016, -7.459310946700275200E-015, 78.75000000000001400 ) ) ; +#87 = DIRECTION ( 'NONE', ( -6.982962677686266700E-015, -9.690807431081764000E-030, -1.000000000000000000 ) ) ; +#88 = AXIS2_PLACEMENT_3D ( 'NONE', #893, #4725, #1328 ) ; +#89 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, 0.4417396178520265900, 2.523993633682192900 ) ) ; +#90 = ADVANCED_FACE ( 'NONE', ( #3982 ), #4127, .T. ) ; +#91 = LINE ( 'NONE', #3829, #4530 ) ; +#92 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -35.00000000000000000, 35.00000000000000000 ) ) ; +#93 = AXIS2_PLACEMENT_3D ( 'NONE', #3921, #916, #482 ) ; +#94 = ORIENTED_EDGE ( 'NONE', *, *, #5429, .F. ) ; +#95 = CARTESIAN_POINT ( 'NONE', ( 1.549273714114452400, -9.469460672393017500, 77.31604266366443300 ) ) ; +#96 = ORIENTED_EDGE ( 'NONE', *, *, #70, .T. ) ; +#97 = VERTEX_POINT ( 'NONE', #2293 ) ; +#98 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -124.0100684654239100, 20.62321694188996100 ) ) ; +#99 = ORIENTED_EDGE ( 'NONE', *, *, #874, .T. ) ; +#100 = EDGE_LOOP ( 'NONE', ( #569, #3548, #2992, #2756 ) ) ; +#101 = ORIENTED_EDGE ( 'NONE', *, *, #1157, .T. ) ; +#102 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -25.50000000000000400, 6.299999999999995400 ) ) ; +#103 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999994300, 10.00000000000002000, 71.94000000000001200 ) ) ; +#104 = EDGE_CURVE ( 'NONE', #4169, #3404, #1839, .T. ) ; +#105 = EDGE_CURVE ( 'NONE', #2222, #5267, #2859, .T. ) ; +#106 = CIRCLE ( 'NONE', #5378, 1.250000000000001100 ) ; +#107 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 6.232618303866677100, 8.073976516756033600 ) ) ; +#108 = ORIENTED_EDGE ( 'NONE', *, *, #242, .T. ) ; +#109 = ORIENTED_EDGE ( 'NONE', *, *, #752, .F. ) ; +#110 = VERTEX_POINT ( 'NONE', #2088 ) ; +#111 = LINE ( 'NONE', #5360, #1127 ) ; +#112 = VERTEX_POINT ( 'NONE', #2342 ) ; +#113 = VERTEX_POINT ( 'NONE', #2066 ) ; +#114 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -30.00000000000000700, 55.50000000000000700 ) ) ; +#115 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#116 = ORIENTED_EDGE ( 'NONE', *, *, #3854, .T. ) ; +#117 = VERTEX_POINT ( 'NONE', #2130 ) ; +#118 = ADVANCED_FACE ( 'NONE', ( #1572 ), #429, .F. ) ; +#119 = EDGE_CURVE ( 'NONE', #2547, #1983, #3856, .T. ) ; +#120 = FACE_OUTER_BOUND ( 'NONE', #4675, .T. ) ; +#121 = AXIS2_PLACEMENT_3D ( 'NONE', #4673, #2108, #5084 ) ; +#122 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -32.40000000000000600, 38.19000000000000500 ) ) ; +#123 = ORIENTED_EDGE ( 'NONE', *, *, #1808, .T. ) ; +#124 = VERTEX_POINT ( 'NONE', #1834 ) ; +#125 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#126 = LINE ( 'NONE', #1534, #3428 ) ; +#127 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, -23.00000000000000400, 0.0000000000000000000 ) ) ; +#128 = CARTESIAN_POINT ( 'NONE', ( 34.92391946327824600, -9.828893528871486000, 75.61591454212168600 ) ) ; +#129 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 4.131788396103512000, 1.541548182677054300 ) ) ; +#130 = AXIS2_PLACEMENT_3D ( 'NONE', #3642, #4514, #1947 ) ; +#131 = CYLINDRICAL_SURFACE ( 'NONE', #4833, 2.500000000000002200 ) ; +#132 = VECTOR ( 'NONE', #3231, 1000.000000000000000 ) ; +#133 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#134 = FACE_OUTER_BOUND ( 'NONE', #1989, .T. ) ; +#135 = EDGE_CURVE ( 'NONE', #563, #1390, #550, .T. ) ; +#136 = VECTOR ( 'NONE', #3270, 1000.000000000000000 ) ; +#137 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.734723475976807100E-016, 0.0000000000000000000 ) ) ; +#138 = EDGE_CURVE ( 'NONE', #3942, #4929, #4856, .T. ) ; +#139 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -35.00000000000000700, 61.20000000000000300 ) ) ; +#140 = VECTOR ( 'NONE', #3029, 1000.000000000000000 ) ; +#141 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -30.00000000000001100, 77.50000000000000000 ) ) ; +#142 = ADVANCED_FACE ( 'NONE', ( #5110, #3713, #1439, #287 ), #2078, .F. ) ; +#143 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 4.039084702772405500, 4.883306130266277000 ) ) ; +#144 = ORIENTED_EDGE ( 'NONE', *, *, #1912, .T. ) ; +#145 = EDGE_CURVE ( 'NONE', #2129, #5191, #2453, .T. ) ; +#146 = CIRCLE ( 'NONE', #921, 1.199999999999992600 ) ; +#147 = CARTESIAN_POINT ( 'NONE', ( 33.39999999999999100, -24.99999999999997900, 68.75000000000001400 ) ) ; +#148 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9961946980917455500, 0.08715574274765822100 ) ) ; +#149 = CIRCLE ( 'NONE', #5238, 1.250000000000001100 ) ; +#150 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 7.625158136161789500E-017, -1.000000000000000000 ) ) ; +#151 = AXIS2_PLACEMENT_3D ( 'NONE', #3163, #3153, #3129 ) ; +#152 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -30.00000000000001100, 72.00000000000001400 ) ) ; +#153 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -25.50000000000000400, 23.79999999999999700 ) ) ; +#154 = EDGE_LOOP ( 'NONE', ( #3415, #3662, #3858, #576 ) ) ; +#155 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.08715574274765822100, 0.9961946980917455500 ) ) ; +#156 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#157 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 5.587269903546542500, 7.001022459040743100 ) ) ; +#158 = VERTEX_POINT ( 'NONE', #1981 ) ; +#159 = CARTESIAN_POINT ( 'NONE', ( -1.530808498933859800E-016, 3.750000000000000900, 77.50000000000001400 ) ) ; +#160 = AXIS2_PLACEMENT_3D ( 'NONE', #1168, #294, #727 ) ; +#161 = VERTEX_POINT ( 'NONE', #1522 ) ; +#162 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#163 = ORIENTED_EDGE ( 'NONE', *, *, #2529, .F. ) ; +#164 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.734723475976804100E-016, 0.0000000000000000000 ) ) ; +#165 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#166 = ADVANCED_FACE ( 'NONE', ( #4731 ), #3456, .T. ) ; +#167 = ORIENTED_EDGE ( 'NONE', *, *, #946, .F. ) ; +#168 = VECTOR ( 'NONE', #2967, 1000.000000000000000 ) ; +#169 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#170 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#171 = ORIENTED_EDGE ( 'NONE', *, *, #4338, .T. ) ; +#172 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.734723475976805600E-016, 0.0000000000000000000 ) ) ; +#173 = EDGE_CURVE ( 'NONE', #3528, #3615, #3590, .T. ) ; +#174 = ORIENTED_EDGE ( 'NONE', *, *, #5260, .T. ) ; +#175 = EDGE_CURVE ( 'NONE', #4484, #3084, #149, .T. ) ; +#176 = VERTEX_POINT ( 'NONE', #1265 ) ; +#177 = CIRCLE ( 'NONE', #4007, 1.250000000000001100 ) ; +#178 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -24.99999999999997900, 68.75000000000001400 ) ) ; +#179 = ORIENTED_EDGE ( 'NONE', *, *, #5498, .T. ) ; +#180 = VERTEX_POINT ( 'NONE', #1013 ) ; +#181 = VECTOR ( 'NONE', #3431, 1000.000000000000000 ) ; +#182 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#183 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -2.775557561562891400E-016 ) ) ; +#184 = EDGE_CURVE ( 'NONE', #5123, #4955, #2315, .T. ) ; +#185 = ORIENTED_EDGE ( 'NONE', *, *, #2034, .T. ) ; +#186 = LINE ( 'NONE', #5172, #63 ) ; +#187 = AXIS2_PLACEMENT_3D ( 'NONE', #4140, #282, #3296 ) ; +#188 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#189 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#190 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#191 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.734723475976804100E-016, 0.0000000000000000000 ) ) ; +#192 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#193 = LINE ( 'NONE', #879, #2496 ) ; +#194 = AXIS2_PLACEMENT_3D ( 'NONE', #968, #4524, #1512 ) ; +#195 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#196 = ADVANCED_FACE ( 'NONE', ( #26 ), #702, .F. ) ; +#197 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#198 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, -35.00100000000001900, 72.00000000000001400 ) ) ; +#199 = VECTOR ( 'NONE', #1941, 1000.000000000000000 ) ; +#200 = VECTOR ( 'NONE', #3034, 1000.000000000000000 ) ; +#201 = CIRCLE ( 'NONE', #5448, 1.199999999999992600 ) ; +#202 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -2.449200000000002900, 15.49999999999998600 ) ) ; +#203 = ORIENTED_EDGE ( 'NONE', *, *, #1765, .F. ) ; +#204 = EDGE_CURVE ( 'NONE', #987, #4096, #1166, .T. ) ; +#205 = CARTESIAN_POINT ( 'NONE', ( 34.99965911426482300, -15.90642976851590600, 75.04501779491300800 ) ) ; +#206 = CIRCLE ( 'NONE', #1680, 2.500000000000002200 ) ; +#207 = EDGE_CURVE ( 'NONE', #1597, #1668, #1101, .T. ) ; +#208 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 15.00000000000000000, 40.00000000000000700 ) ) ; +#209 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.50000000000000400, 8.699999999999995700 ) ) ; +#210 = FACE_OUTER_BOUND ( 'NONE', #367, .T. ) ; +#211 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#212 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#213 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.49999999999999300, 66.76856112887630000 ) ) ; +#214 = EDGE_LOOP ( 'NONE', ( #4705, #5210, #1595, #3016 ) ) ; +#215 = CARTESIAN_POINT ( 'NONE', ( 33.39999999999994200, 11.20000000000001900, 68.75000000000001400 ) ) ; +#216 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#217 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#218 = ADVANCED_FACE ( 'NONE', ( #1032 ), #3180, .F. ) ; +#219 = ORIENTED_EDGE ( 'NONE', *, *, #1355, .F. ) ; +#220 = VERTEX_POINT ( 'NONE', #213 ) ; +#221 = AXIS2_PLACEMENT_3D ( 'NONE', #1246, #5477, #3780 ) ; +#222 = EDGE_LOOP ( 'NONE', ( #626, #1456, #2272, #560 ) ) ; +#223 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 14.82657296128962800, 32.92493926241019900 ) ) ; +#224 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#225 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.500000000000008000, 15.49999999999998600 ) ) ; +#226 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -35.00000000000000000, 35.00000000000000000 ) ) ; +#227 = VERTEX_POINT ( 'NONE', #202 ) ; +#228 = ORIENTED_EDGE ( 'NONE', *, *, #19, .F. ) ; +#229 = AXIS2_PLACEMENT_3D ( 'NONE', #4333, #1758, #4754 ) ; +#230 = ORIENTED_EDGE ( 'NONE', *, *, #4231, .F. ) ; +#231 = CARTESIAN_POINT ( 'NONE', ( 6.888638245203553300E-016, -8.750000000000012400, 78.75000000000001400 ) ) ; +#232 = AXIS2_PLACEMENT_3D ( 'NONE', #3416, #837, #3844 ) ; +#233 = FACE_OUTER_BOUND ( 'NONE', #1400, .T. ) ; +#234 = ORIENTED_EDGE ( 'NONE', *, *, #3500, .F. ) ; +#235 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -6.591949208711870900E-015, 77.50000000000001400 ) ) ; +#236 = CARTESIAN_POINT ( 'NONE', ( 32.49999999999998600, -35.00000000000000700, 77.50000000000002800 ) ) ; +#237 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#238 = ORIENTED_EDGE ( 'NONE', *, *, #5192, .T. ) ; +#239 = EDGE_CURVE ( 'NONE', #4096, #3671, #5425, .T. ) ; +#240 = CARTESIAN_POINT ( 'NONE', ( -3.217792750945012000E-015, -20.00000000000000700, 78.75000000000001400 ) ) ; +#241 = VERTEX_POINT ( 'NONE', #139 ) ; +#242 = EDGE_CURVE ( 'NONE', #4009, #2060, #4593, .T. ) ; +#243 = FACE_OUTER_BOUND ( 'NONE', #3194, .T. ) ; +#244 = ORIENTED_EDGE ( 'NONE', *, *, #1580, .F. ) ; +#245 = VERTEX_POINT ( 'NONE', #256 ) ; +#246 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#247 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 9.917327502703299700, 17.78653369419374600 ) ) ; +#248 = ORIENTED_EDGE ( 'NONE', *, *, #3422, .F. ) ; +#249 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -15.43121245093975300, 11.12379794200893500 ) ) ; +#250 = CIRCLE ( 'NONE', #2115, 0.5000000000000004400 ) ; +#251 = EDGE_CURVE ( 'NONE', #1333, #5250, #2043, .T. ) ; +#252 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#253 = EDGE_LOOP ( 'NONE', ( #2628, #3048, #4536, #1745 ) ) ; +#254 = ORIENTED_EDGE ( 'NONE', *, *, #5091, .F. ) ; +#255 = TOROIDAL_SURFACE ( 'NONE', #5444, 1.250000000000002200, 1.250000000000000000 ) ; +#256 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -30.00000000000000700, 36.20000000000000300 ) ) ; +#257 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -20.50000000000000400, 2.500000000000001300 ) ) ; +#258 = LINE ( 'NONE', #3356, #2704 ) ; +#259 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.387778780781444500E-015, 0.0000000000000000000 ) ) ; +#260 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999996400, -19.99999999999998200, 75.00000000000001400 ) ) ; +#261 = AXIS2_PLACEMENT_3D ( 'NONE', #4846, #4837, #4829 ) ; +#262 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4306, #1707, #5140, #2601, #18, #3027, #446, #3455, #882, #3884, #1317, #4323, #1743, #4745 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0002590745622343931400, 0.0005181491244687862700, 0.001036298248937555600, 0.001554447373406325000, 0.001813521935640729200, 0.002072596497875133400 ), + .UNSPECIFIED. ) ; +#263 = AXIS2_PLACEMENT_3D ( 'NONE', #236, #3253, #670 ) ; +#264 = CYLINDRICAL_SURFACE ( 'NONE', #1503, 2.500000000000000000 ) ; +#265 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#266 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 8.862820752987143900, 7.700080826649809800 ) ) ; +#267 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#268 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.059793774530135100, 20.53158018112177500 ) ) ; +#269 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #4774, #5328, #4814, #4756 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.712388980384688800, 6.283185307179586200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243648300, 0.8047378541243648300, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#270 = LINE ( 'NONE', #3742, #1297 ) ; +#271 = AXIS2_PLACEMENT_3D ( 'NONE', #3653, #645, #3233 ) ; +#272 = FACE_OUTER_BOUND ( 'NONE', #3259, .T. ) ; +#273 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#274 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#275 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#276 = CIRCLE ( 'NONE', #5278, 1.250000000000001100 ) ; +#277 = ORIENTED_EDGE ( 'NONE', *, *, #2991, .F. ) ; +#278 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#279 = CARTESIAN_POINT ( 'NONE', ( 37.50099999999998300, -25.50000000000000400, 7.499999999999996400 ) ) ; +#280 = CYLINDRICAL_SURFACE ( 'NONE', #5035, 2.500000000000000400 ) ; +#281 = EDGE_CURVE ( 'NONE', #4062, #4209, #900, .T. ) ; +#282 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#283 = EDGE_CURVE ( 'NONE', #980, #648, #269, .T. ) ; +#284 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 5.898570596279594000, 3.210168229755880900 ) ) ; +#285 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#286 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#287 = FACE_BOUND ( 'NONE', #3274, .T. ) ; +#288 = CARTESIAN_POINT ( 'NONE', ( 0.7559009375180991700, -5.113003714729075000, 76.79912110019952800 ) ) ; +#289 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 2.775557561562891400E-016 ) ) ; +#290 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -24.99999999999997900, 65.56000000000001600 ) ) ; +#291 = EDGE_LOOP ( 'NONE', ( #3020, #2336, #4475, #2478, #1804, #4084 ) ) ; +#292 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#293 = EDGE_CURVE ( 'NONE', #3350, #180, #5296, .T. ) ; +#294 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#295 = CARTESIAN_POINT ( 'NONE', ( 0.1850065413515483100, -9.969384845651392300, 75.95623853707360200 ) ) ; +#296 = ORIENTED_EDGE ( 'NONE', *, *, #5341, .T. ) ; +#297 = PLANE ( 'NONE', #3592 ) ; +#298 = AXIS2_PLACEMENT_3D ( 'NONE', #2659, #1799, #4789 ) ; +#299 = ORIENTED_EDGE ( 'NONE', *, *, #4364, .T. ) ; +#300 = VERTEX_POINT ( 'NONE', #4594 ) ; +#301 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 15.00000000000000000, 1.301042606982605300E-015 ) ) ; +#302 = AXIS2_PLACEMENT_3D ( 'NONE', #412, #2988, #5508 ) ; +#303 = FACE_OUTER_BOUND ( 'NONE', #2215, .T. ) ; +#304 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 2.062396944751332400, 3.148378383210885800 ) ) ; +#305 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999994300, 10.00000000000002000, 68.75000000000001400 ) ) ; +#306 = EDGE_LOOP ( 'NONE', ( #3734, #5203, #1398, #723 ) ) ; +#307 = CARTESIAN_POINT ( 'NONE', ( 0.1187504154795176500, 0.09630293977774473400, 75.76591990394158000 ) ) ; +#308 = PLANE ( 'NONE', #4935 ) ; +#309 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #4348, #2093, ( #454 ) ) ; +#310 = EDGE_LOOP ( 'NONE', ( #575, #4677 ) ) ; +#311 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -35.00000000000000000, 0.0000000000000000000 ) ) ; +#312 = TOROIDAL_SURFACE ( 'NONE', #4093, 1.250000000000002200, 1.250000000000000000 ) ; +#313 = ORIENTED_EDGE ( 'NONE', *, *, #1045, .F. ) ; +#314 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999994300, 12.49999999999999300, 66.76856112887627100 ) ) ; +#315 = CARTESIAN_POINT ( 'NONE', ( 0.2522330730247281400, -9.987243147919505400, 76.09432346314797300 ) ) ; +#316 = ORIENTED_EDGE ( 'NONE', *, *, #2674, .T. ) ; +#317 = FACE_BOUND ( 'NONE', #4862, .T. ) ; +#318 = ORIENTED_EDGE ( 'NONE', *, *, #1058, .F. ) ; +#319 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000001800, -15.00000000000000900, 78.75000000000001400 ) ) ; +#320 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#321 = EDGE_CURVE ( 'NONE', #1131, #2731, #2188, .T. ) ; +#322 = ORIENTED_EDGE ( 'NONE', *, *, #2136, .T. ) ; +#323 = EDGE_CURVE ( 'NONE', #4080, #1626, #1906, .T. ) ; +#324 = VERTEX_POINT ( 'NONE', #4434 ) ; +#325 = VERTEX_POINT ( 'NONE', #4399 ) ; +#326 = LINE ( 'NONE', #1296, #59 ) ; +#327 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2681, #5215, #89, #3098, #518, #3532, #958, #3963, #1392, #4400, #1822, #4818, #2259, #5229, #2701, #107, #3112, #536, #3554, #975, #3975, #1416, #4418, #1837, #4839, #2283, #5245, #2714 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0006610443918274595400, 0.001322088783654919100, 0.001983133175482378400, 0.002644177567309837300, 0.003966266350964755900, 0.005288355134619674600, 0.007932532701929515300, 0.01057671026923935600, 0.01586506540385903100, 0.02115342053847870900, 0.02644177567309838700, 0.03173013080771806100, 0.04230684107695741700 ), + .UNSPECIFIED. ) ; +#328 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 1.533662985785355000, 0.1973350934924726100 ) ) ; +#329 = ORIENTED_EDGE ( 'NONE', *, *, #601, .F. ) ; +#330 = CYLINDRICAL_SURFACE ( 'NONE', #3294, 1.200000000000006600 ) ; +#331 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 11.80308736127773500, 27.96645961091466900 ) ) ; +#332 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999994300, 12.49999999999999300, 70.73143887112377100 ) ) ; +#333 = FACE_OUTER_BOUND ( 'NONE', #5433, .T. ) ; +#334 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 11.58135045774951300, 26.26414088018234600 ) ) ; +#335 = FACE_OUTER_BOUND ( 'NONE', #4884, .T. ) ; +#336 = CIRCLE ( 'NONE', #2774, 1.200000000000006600 ) ; +#337 = ORIENTED_EDGE ( 'NONE', *, *, #2426, .T. ) ; +#338 = AXIS2_PLACEMENT_3D ( 'NONE', #1514, #1497, #1491 ) ; +#339 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1067, #5004, #1587, #307, #3317, #738, #392, #823, #5488, #1176, #2894, #755, #3764, #5023 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0005157312470454054700, 0.0007735968705680898200, 0.001031462494090774300, 0.001547193741136173600, 0.001805059364658882000, 0.002062924988181590200 ), + .UNSPECIFIED. ) ; +#340 = AXIS2_PLACEMENT_3D ( 'NONE', #305, #3316, #737 ) ; +#341 = LINE ( 'NONE', #2698, #1490 ) ; +#342 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -6.736790197968178700E-017, -1.000000000000000000 ) ) ; +#343 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#344 = ADVANCED_FACE ( 'NONE', ( #2919 ), #4542, .F. ) ; +#345 = ORIENTED_EDGE ( 'NONE', *, *, #4817, .F. ) ; +#346 = AXIS2_PLACEMENT_3D ( 'NONE', #4453, #1447, #2298 ) ; +#347 = FACE_OUTER_BOUND ( 'NONE', #4933, .T. ) ; +#348 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 11.37554252230213900, 13.90078205106825500 ) ) ; +#349 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 12.33154708673772500, 17.20091597938720800 ) ) ; +#350 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -14.55080000000001100, 21.18695830425251000 ) ) ; +#351 = CARTESIAN_POINT ( 'NONE', ( 8.244528225426736300E-016, -10.00000000000001200, 76.25000000000001400 ) ) ; +#352 = EDGE_CURVE ( 'NONE', #4278, #3199, #756, .T. ) ; +#353 = LINE ( 'NONE', #3824, #2518 ) ; +#354 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#355 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 4.854711508508369600, 5.912194959465447900 ) ) ; +#356 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#357 = EDGE_LOOP ( 'NONE', ( #2798, #2810 ) ) ; +#358 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#359 = EDGE_CURVE ( 'NONE', #5105, #1748, #1770, .T. ) ; +#360 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -35.00000000000000000, 38.19000000000000500 ) ) ; +#361 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 12.49999999999999300, 80.00000000000001400 ) ) ; +#362 = ORIENTED_EDGE ( 'NONE', *, *, #3582, .T. ) ; +#363 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.220446049250313400E-014, 80.00000000000001400 ) ) ; +#364 = ORIENTED_EDGE ( 'NONE', *, *, #3752, .F. ) ; +#365 = CARTESIAN_POINT ( 'NONE', ( 32.49999999999999300, 5.400676743415732300, 2.669866310147178500 ) ) ; +#366 = VERTEX_POINT ( 'NONE', #4319 ) ; +#367 = EDGE_LOOP ( 'NONE', ( #2448, #4408, #5510, #2940 ) ) ; +#368 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#369 = VERTEX_POINT ( 'NONE', #4245 ) ; +#370 = EDGE_CURVE ( 'NONE', #4052, #5401, #5040, .T. ) ; +#371 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.806255641895631900E-015, 75.00000000000001400 ) ) ; +#372 = ADVANCED_FACE ( 'NONE', ( #612 ), #4300, .F. ) ; +#373 = CARTESIAN_POINT ( 'NONE', ( 1.925929944387235900E-031, 0.2227519055726227800, 2.500000000000000000 ) ) ; +#374 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#375 = CYLINDRICAL_SURFACE ( 'NONE', #3407, 2.500000000000002200 ) ; +#376 = VERTEX_POINT ( 'NONE', #4106 ) ; +#377 = ORIENTED_EDGE ( 'NONE', *, *, #484, .T. ) ; +#378 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 12.49999999999999500, 40.00000000000001400 ) ) ; +#379 = AXIS2_PLACEMENT_3D ( 'NONE', #5431, #4611, #1606 ) ; +#380 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -14.55080000000001100, 21.18695830425251000 ) ) ; +#381 = ORIENTED_EDGE ( 'NONE', *, *, #3126, .T. ) ; +#382 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, -10.00000000000001100, 77.50000000000001400 ) ) ; +#383 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#384 = FACE_OUTER_BOUND ( 'NONE', #1939, .T. ) ; +#385 = ORIENTED_EDGE ( 'NONE', *, *, #5490, .F. ) ; +#386 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 5.928593550334433700E-014, 8.936314941956774400E-029 ) ) ; +#387 = ORIENTED_EDGE ( 'NONE', *, *, #3961, .T. ) ; +#388 = DIRECTION ( 'NONE', ( 1.053972186726120700E-014, -1.000000000000000000, -1.053972186726121700E-014 ) ) ; +#389 = ORIENTED_EDGE ( 'NONE', *, *, #4572, .T. ) ; +#390 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#391 = LINE ( 'NONE', #3143, #3680 ) ; +#392 = CARTESIAN_POINT ( 'NONE', ( 0.04432956720673209700, 0.2673303949811120000, 75.47312975426332600 ) ) ; +#393 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -30.00000000000000400, 10.00000000000000500 ) ) ; +#394 = ORIENTED_EDGE ( 'NONE', *, *, #1287, .T. ) ; +#395 = ORIENTED_EDGE ( 'NONE', *, *, #4105, .T. ) ; +#396 = CARTESIAN_POINT ( 'NONE', ( 32.49999999999999300, 13.27126272129076100, 21.24514583606382300 ) ) ; +#397 = CYLINDRICAL_SURFACE ( 'NONE', #4042, 3.189999999999998600 ) ; +#398 = EDGE_CURVE ( 'NONE', #3350, #4554, #1632, .T. ) ; +#399 = EDGE_CURVE ( 'NONE', #1925, #442, #492, .T. ) ; +#400 = LOCAL_TIME ( 17, 42, 40.00000000000000000, #1547 ) ; +#401 = CIRCLE ( 'NONE', #3107, 1.250000000000002200 ) ; +#402 = CARTESIAN_POINT ( 'NONE', ( 0.2522330730247215900, -5.012756852080515000, 76.09432346314795800 ) ) ; +#403 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 1.684197549492044600E-016 ) ) ; +#404 = CARTESIAN_POINT ( 'NONE', ( 32.87446321515196200, -8.827563901441548600, 77.47399239786588500 ) ) ; +#405 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 12.49999999999999500, 40.00000000000001400 ) ) ; +#406 = ADVANCED_FACE ( 'NONE', ( #3922 ), #4918, .T. ) ; +#407 = FACE_OUTER_BOUND ( 'NONE', #4215, .T. ) ; +#408 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -35.00000000000000000, 35.00000000000000000 ) ) ; +#409 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995700, 1.647987302177958200E-014, 77.50000000000001400 ) ) ; +#410 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -35.00000000000000700, 72.00000000000001400 ) ) ; +#411 = EDGE_CURVE ( 'NONE', #938, #3217, #2660, .T. ) ; +#412 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995000, 3.750000000000024900, 78.75000000000001400 ) ) ; +#413 = CIRCLE ( 'NONE', #1254, 1.199999999999992600 ) ; +#414 = AXIS2_PLACEMENT_3D ( 'NONE', #2983, #403, #3410 ) ; +#415 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000003100, 4.726986955304354900, 2.025625336372546500 ) ) ; +#416 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#417 = FACE_BOUND ( 'NONE', #5059, .T. ) ; +#418 = AXIS2_PLACEMENT_3D ( 'NONE', #4582, #1574, #4151 ) ; +#419 = ORIENTED_EDGE ( 'NONE', *, *, #1482, .T. ) ; +#420 = AXIS2_PLACEMENT_3D ( 'NONE', #2834, #237, #3254 ) ; +#421 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.500000000000003600, 67.00000000000001400 ) ) ; +#422 = CARTESIAN_POINT ( 'NONE', ( -7.199102425303746900E-014, -7.500000000000009800, 77.50000000000001400 ) ) ; +#423 = CYLINDRICAL_SURFACE ( 'NONE', #4477, 2.500000000000002200 ) ; +#424 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -30.00000000000001100, 77.50000000000000000 ) ) ; +#425 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -7.625158136161789500E-017, 1.000000000000000000 ) ) ; +#426 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#427 = PLANE ( 'NONE', #2408 ) ; +#428 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#429 = CYLINDRICAL_SURFACE ( 'NONE', #4121, 1.199999999999999700 ) ; +#430 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.00000000000000000, 68.75000000000001400 ) ) ; +#431 = EDGE_CURVE ( 'NONE', #1025, #4390, #3781, .T. ) ; +#432 = EDGE_CURVE ( 'NONE', #2325, #621, #353, .T. ) ; +#433 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000004000, 12.87478823468321000, 19.35555181967416200 ) ) ; +#434 = ADVANCED_FACE ( 'NONE', ( #210 ), #3644, .T. ) ; +#435 = ORIENTED_EDGE ( 'NONE', *, *, #5358, .T. ) ; +#436 = PLANE ( 'NONE', #1967 ) ; +#437 = ORIENTED_EDGE ( 'NONE', *, *, #2994, .F. ) ; +#438 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#439 = EDGE_CURVE ( 'NONE', #4253, #5250, #1373, .T. ) ; +#440 = CARTESIAN_POINT ( 'NONE', ( 33.45072628588560800, -5.530539327606953200, 77.31604266366444700 ) ) ; +#441 = ORIENTED_EDGE ( 'NONE', *, *, #2498, .F. ) ; +#442 = VERTEX_POINT ( 'NONE', #3600 ) ; +#443 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#444 = VECTOR ( 'NONE', #2050, 1000.000000000000000 ) ; +#445 = ORIENTED_EDGE ( 'NONE', *, *, #3462, .T. ) ; +#446 = CARTESIAN_POINT ( 'NONE', ( 0.01258623881194406500, -15.44126690909683000, 75.28156844652571100 ) ) ; +#447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#448 = VERTEX_POINT ( 'NONE', #3540 ) ; +#449 = AXIS2_PLACEMENT_3D ( 'NONE', #3247, #3240, #3221 ) ; +#450 = VECTOR ( 'NONE', #2481, 1000.000000000000000 ) ; +#451 = ORIENTED_EDGE ( 'NONE', *, *, #2243, .T. ) ; +#452 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.387778780781444500E-015, 0.0000000000000000000 ) ) ; +#453 = AXIS2_PLACEMENT_3D ( 'NONE', #2220, #5187, #2658 ) ; +#454 = PRODUCT ( 'Body', 'Body', '', ( #4662 ) ) ; +#455 = EDGE_LOOP ( 'NONE', ( #5070, #5047, #2082, #2476 ) ) ; +#456 = ORIENTED_EDGE ( 'NONE', *, *, #4506, .F. ) ; +#457 = FACE_BOUND ( 'NONE', #5383, .T. ) ; +#458 = ORIENTED_EDGE ( 'NONE', *, *, #4338, .F. ) ; +#459 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, -30.00000000000001100, 80.00000000000001400 ) ) ; +#460 = AXIS2_PLACEMENT_3D ( 'NONE', #3367, #788, #3789 ) ; +#461 = CARTESIAN_POINT ( 'NONE', ( 37.50099999999998300, -25.50000000000000400, 43.69999999999999600 ) ) ; +#462 = VERTEX_POINT ( 'NONE', #3434 ) ; +#463 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -35.00000000000000000, 35.00000000000000000 ) ) ; +#464 = ORIENTED_EDGE ( 'NONE', *, *, #4952, .T. ) ; +#465 = ADVANCED_FACE ( 'NONE', ( #3519 ), #84, .F. ) ; +#466 = FACE_OUTER_BOUND ( 'NONE', #4117, .T. ) ; +#467 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 8.786796564403578800, 1.524266227890324700E-015 ) ) ; +#468 = CARTESIAN_POINT ( 'NONE', ( 0.07775222879382993900, 13.13028869250943700, 68.03864349177028700 ) ) ; +#469 = VERTEX_POINT ( 'NONE', #3334 ) ; +#470 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999998600, -19.99999999999998200, 77.50000000000001400 ) ) ; +#471 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#472 = LINE ( 'NONE', #4229, #4898 ) ; +#473 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -14.99100622546988300, 21.20617812313072300 ) ) ; +#474 = EDGE_CURVE ( 'NONE', #5079, #2874, #4659, .T. ) ; +#475 = VECTOR ( 'NONE', #4248, 1000.000000000000000 ) ; +#476 = EDGE_CURVE ( 'NONE', #47, #1412, #2381, .T. ) ; +#477 = LINE ( 'NONE', #5335, #3630 ) ; +#478 = TOROIDAL_SURFACE ( 'NONE', #2483, 1.250000000000002200, 1.250000000000000000 ) ; +#479 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 14.99999999999999300, 80.00000000000001400 ) ) ; +#480 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.50000000000000400, 24.99999999999999600 ) ) ; +#481 = LINE ( 'NONE', #2238, #4911 ) ; +#482 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#483 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 14.99999999999999600, 40.00000000000001400 ) ) ; +#484 = EDGE_CURVE ( 'NONE', #469, #1531, #1501, .T. ) ; +#485 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#486 = ORIENTED_EDGE ( 'NONE', *, *, #4329, .F. ) ; +#487 = AXIS2_PLACEMENT_3D ( 'NONE', #3314, #735, #3737 ) ; +#488 = FACE_BOUND ( 'NONE', #4923, .T. ) ; +#489 = ADVANCED_FACE ( 'NONE', ( #1237 ), #3196, .F. ) ; +#490 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, -25.00000000000000000, 68.75000000000001400 ) ) ; +#491 = AXIS2_PLACEMENT_3D ( 'NONE', #4482, #1484, #4046 ) ; +#492 = CIRCLE ( 'NONE', #4001, 2.500000000000000000 ) ; +#493 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -30.00000000000001100, 80.00000000000000000 ) ) ; +#494 = CARTESIAN_POINT ( 'NONE', ( 0.08087788394666019200, -10.00000000000001200, 76.19307411316987100 ) ) ; +#495 = VERTEX_POINT ( 'NONE', #3168 ) ; +#496 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -2.449199999999999400, 67.00000000000001400 ) ) ; +#497 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#498 = ORIENTED_EDGE ( 'NONE', *, *, #2711, .F. ) ; +#499 = EDGE_CURVE ( 'NONE', #3543, #113, #5483, .T. ) ; +#500 = ORIENTED_EDGE ( 'NONE', *, *, #4256, .T. ) ; +#501 = EDGE_CURVE ( 'NONE', #760, #2079, #1094, .T. ) ; +#502 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9961946980917455500, -0.08715574274765822100 ) ) ; +#503 = EDGE_LOOP ( 'NONE', ( #3359, #4693, #5254, #1263 ) ) ; +#504 = DATE_AND_TIME ( #1650, #2804 ) ; +#505 = ORIENTED_EDGE ( 'NONE', *, *, #4961, .F. ) ; +#506 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 2.775557561562891400E-016 ) ) ; +#507 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#508 = CYLINDRICAL_SURFACE ( 'NONE', #2263, 1.199999999999999700 ) ; +#509 = ADVANCED_FACE ( 'NONE', ( #2247 ), #961, .T. ) ; +#510 = ORIENTED_EDGE ( 'NONE', *, *, #4181, .T. ) ; +#511 = EDGE_LOOP ( 'NONE', ( #167, #2561, #4423, #1898, #4284, #1741 ) ) ; +#512 = ORIENTED_EDGE ( 'NONE', *, *, #4289, .T. ) ; +#513 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -16.25000000000000700, 78.75000000000001400 ) ) ; +#514 = LINE ( 'NONE', #2673, #642 ) ; +#515 = ORIENTED_EDGE ( 'NONE', *, *, #4395, .F. ) ; +#516 = PLANE ( 'NONE', #5179 ) ; +#517 = ORIENTED_EDGE ( 'NONE', *, *, #3571, .F. ) ; +#518 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 1.077861350411249800, 2.677202007196931400 ) ) ; +#519 = ORIENTED_EDGE ( 'NONE', *, *, #3355, .T. ) ; +#520 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#521 = AXIS2_PLACEMENT_3D ( 'NONE', #4375, #1791, #4785 ) ; +#522 = ORIENTED_EDGE ( 'NONE', *, *, #1407, .T. ) ; +#523 = EDGE_LOOP ( 'NONE', ( #2307, #2510 ) ) ; +#524 = FACE_OUTER_BOUND ( 'NONE', #2780, .T. ) ; +#525 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#526 = AXIS2_PLACEMENT_3D ( 'NONE', #3985, #1428, #4431 ) ; +#527 = CARTESIAN_POINT ( 'NONE', ( 1.917625078213869300, -9.113446823351191400, 77.43347912600727100 ) ) ; +#528 = VECTOR ( 'NONE', #1908, 1000.000000000000000 ) ; +#529 = EDGE_CURVE ( 'NONE', #843, #1536, #3249, .T. ) ; +#530 = CARTESIAN_POINT ( 'NONE', ( 33.39999999999994200, 10.00000000000002000, 69.95000000000001700 ) ) ; +#531 = EDGE_CURVE ( 'NONE', #2827, #3499, #2109, .T. ) ; +#532 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -20.50000000000000400, 1.257674520083185300E-015 ) ) ; +#533 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.387778780781444500E-015, 0.0000000000000000000 ) ) ; +#534 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#535 = VECTOR ( 'NONE', #4030, 1000.000000000000000 ) ; +#536 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, 7.754516935406828200, 11.18104856617000000 ) ) ; +#537 = ADVANCED_FACE ( 'NONE', ( #4397 ), #826, .F. ) ; +#538 = CIRCLE ( 'NONE', #3650, 1.199999999999992600 ) ; +#539 = EDGE_CURVE ( 'NONE', #2697, #1828, #1973, .T. ) ; +#540 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#541 = CIRCLE ( 'NONE', #1294, 2.500000000000000400 ) ; +#542 = ORIENTED_EDGE ( 'NONE', *, *, #4462, .T. ) ; +#543 = CARTESIAN_POINT ( 'NONE', ( 13.00000000000000200, -35.00000000000000700, 55.50000000000000700 ) ) ; +#544 = VECTOR ( 'NONE', #2320, 1000.000000000000000 ) ; +#545 = AXIS2_PLACEMENT_3D ( 'NONE', #743, #682, #667 ) ; +#546 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#547 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.224646799147276800E-016, 0.0000000000000000000 ) ) ; +#548 = AXIS2_PLACEMENT_3D ( 'NONE', #1078, #4102, #1526 ) ; +#549 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.249999999999992700, 80.00000000000001400 ) ) ; +#550 = CIRCLE ( 'NONE', #3831, 1.250000000000002200 ) ; +#551 = CARTESIAN_POINT ( 'NONE', ( 34.81508166154093000, -9.969361415111757600, 75.95605736619388900 ) ) ; +#552 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 2.612178010758196200, 3.528274352261050700 ) ) ; +#553 = AXIS2_PLACEMENT_3D ( 'NONE', #1502, #4073, #1076 ) ; +#554 = VERTEX_POINT ( 'NONE', #2691 ) ; +#555 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.49999999999999800, 1.084202172485504400E-015 ) ) ; +#556 = CARTESIAN_POINT ( 'NONE', ( 1.071565949253891500E-015, -6.250000000000006200, 77.50000000000001400 ) ) ; +#557 = ADVANCED_FACE ( 'NONE', ( #4261, #3108, #5233, #4120, #2985, #5355 ), #2579, .F. ) ; +#558 = EDGE_LOOP ( 'NONE', ( #5065, #2002, #4653, #1845 ) ) ; +#559 = ORIENTED_EDGE ( 'NONE', *, *, #1655, .T. ) ; +#560 = ORIENTED_EDGE ( 'NONE', *, *, #3200, .F. ) ; +#561 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#562 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.224646799147275600E-016, 0.0000000000000000000 ) ) ; +#563 = VERTEX_POINT ( 'NONE', #2447 ) ; +#564 = EDGE_CURVE ( 'NONE', #3211, #1910, #1832, .T. ) ; +#565 = EDGE_CURVE ( 'NONE', #5464, #4696, #5107, .T. ) ; +#566 = LINE ( 'NONE', #1618, #444 ) ; +#567 = ORIENTED_EDGE ( 'NONE', *, *, #3983, .T. ) ; +#568 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959341800E-015, 5.576111357419781800, 2.850265653427436000 ) ) ; +#569 = ORIENTED_EDGE ( 'NONE', *, *, #3525, .T. ) ; +#570 = CIRCLE ( 'NONE', #2076, 5.050800000000001500 ) ; +#571 = EDGE_LOOP ( 'NONE', ( #2826, #1378, #4219, #1466 ) ) ; +#572 = ORIENTED_EDGE ( 'NONE', *, *, #5392, .T. ) ; +#573 = CARTESIAN_POINT ( 'NONE', ( -1.122898466706103900E-028, -6.250000000000008000, 78.75000000000001400 ) ) ; +#574 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#575 = ORIENTED_EDGE ( 'NONE', *, *, #4953, .T. ) ; +#576 = ORIENTED_EDGE ( 'NONE', *, *, #4790, .T. ) ; +#577 = EDGE_CURVE ( 'NONE', #2731, #2824, #3980, .T. ) ; +#578 = CIRCLE ( 'NONE', #1714, 1.250000000000001100 ) ; +#579 = AXIS2_PLACEMENT_3D ( 'NONE', #4396, #1817, #4809 ) ; +#580 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#581 = ORIENTED_EDGE ( 'NONE', *, *, #1553, .T. ) ; +#582 = ORIENTED_EDGE ( 'NONE', *, *, #5291, .F. ) ; +#583 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999992900, 5.000000000000024900, 75.00000000000001400 ) ) ; +#584 = CARTESIAN_POINT ( 'NONE', ( 8.244528225426736300E-016, -10.00000000000001200, 76.25000000000001400 ) ) ; +#585 = VECTOR ( 'NONE', #2077, 1000.000000000000000 ) ; +#586 = AXIS2_PLACEMENT_3D ( 'NONE', #430, #2602, #4308 ) ; +#587 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#588 = ADVANCED_FACE ( 'NONE', ( #1702 ), #423, .T. ) ; +#589 = ORIENTED_EDGE ( 'NONE', *, *, #3033, .F. ) ; +#590 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #2044, #2653 ) ; +#591 = CYLINDRICAL_SURFACE ( 'NONE', #1565, 3.189999999999998600 ) ; +#592 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#593 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, 9.999999999999994700, 71.94000000000001200 ) ) ; +#594 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Body', ( #4848, #27 ), #4170 ) ; +#595 = LINE ( 'NONE', #2084, #5020 ) ; +#596 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.387778780781444500E-015, 0.0000000000000000000 ) ) ; +#597 = CIRCLE ( 'NONE', #5523, 2.500000000000002200 ) ; +#598 = EDGE_CURVE ( 'NONE', #4949, #4628, #1566, .T. ) ; +#599 = CIRCLE ( 'NONE', #1610, 5.050799999999998000 ) ; +#600 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#601 = EDGE_CURVE ( 'NONE', #1828, #3671, #2717, .T. ) ; +#602 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#603 = CARTESIAN_POINT ( 'NONE', ( 1.530808498934341900E-016, 1.249999999999992700, 77.50000000000001400 ) ) ; +#604 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#605 = FACE_OUTER_BOUND ( 'NONE', #4097, .T. ) ; +#606 = DIRECTION ( 'NONE', ( -1.734723475976806800E-016, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#607 = ORIENTED_EDGE ( 'NONE', *, *, #2816, .F. ) ; +#608 = FACE_OUTER_BOUND ( 'NONE', #1601, .T. ) ; +#609 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#610 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -2.220446049250313400E-014, 80.00000000000001400 ) ) ; +#611 = ADVANCED_FACE ( 'NONE', ( #3851 ), #280, .T. ) ; +#612 = FACE_OUTER_BOUND ( 'NONE', #769, .T. ) ; +#613 = AXIS2_PLACEMENT_3D ( 'NONE', #1438, #1429, #1422 ) ; +#614 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#615 = PLANE ( 'NONE', #4768 ) ; +#616 = CARTESIAN_POINT ( 'NONE', ( 3.699212843905351100E-016, -7.372574772901430200E-015, 77.50000000000001400 ) ) ; +#617 = EDGE_LOOP ( 'NONE', ( #4751, #4859, #296, #4068 ) ) ; +#618 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995000, 5.000000000000024900, 77.50000000000001400 ) ) ; +#619 = AXIS2_PLACEMENT_3D ( 'NONE', #634, #224, #3245 ) ; +#620 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.750000000000000900, 80.00000000000001400 ) ) ; +#621 = VERTEX_POINT ( 'NONE', #2101 ) ; +#622 = AXIS2_PLACEMENT_3D ( 'NONE', #5279, #4466, #587 ) ; +#623 = VERTEX_POINT ( 'NONE', #2059 ) ; +#624 = EDGE_LOOP ( 'NONE', ( #2156, #1940, #3074 ) ) ; +#625 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 14.99999999999998600, 80.00000000000001400 ) ) ; +#626 = ORIENTED_EDGE ( 'NONE', *, *, #3006, .F. ) ; +#627 = EDGE_CURVE ( 'NONE', #113, #3543, #4852, .T. ) ; +#628 = PERSON_AND_ORGANIZATION ( #5121, #5438 ) ; +#629 = ORIENTED_EDGE ( 'NONE', *, *, #2435, .F. ) ; +#630 = ORIENTED_EDGE ( 'NONE', *, *, #4395, .T. ) ; +#631 = EDGE_LOOP ( 'NONE', ( #731, #1588 ) ) ; +#632 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000700, -16.16236430419922600, 75.00000000000002800 ) ) ; +#633 = FACE_OUTER_BOUND ( 'NONE', #4432, .T. ) ; +#634 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, -7.500000000000009800, 75.00000000000001400 ) ) ; +#635 = VERTEX_POINT ( 'NONE', #2008 ) ; +#636 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999994300, 10.00000000000002000, 65.56000000000001600 ) ) ; +#637 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -8.673617379884035500E-017, 1.000000000000000000 ) ) ; +#638 = ORIENTED_EDGE ( 'NONE', *, *, #3423, .T. ) ; +#639 = EDGE_CURVE ( 'NONE', #2553, #1412, #3711, .T. ) ; +#640 = ORIENTED_EDGE ( 'NONE', *, *, #3423, .F. ) ; +#641 = ADVANCED_FACE ( 'NONE', ( #1436 ), #2588, .T. ) ; +#642 = VECTOR ( 'NONE', #82, 1000.000000000000000 ) ; +#643 = CARTESIAN_POINT ( 'NONE', ( 7.525773747001218900E-013, 9.688672375247055200, 9.433276837980786300 ) ) ; +#644 = ORIENTED_EDGE ( 'NONE', *, *, #3661, .F. ) ; +#645 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#646 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.940206225469880900, 10.46841981887819600 ) ) ; +#647 = VERTEX_POINT ( 'NONE', #1792 ) ; +#648 = VERTEX_POINT ( 'NONE', #1773 ) ; +#649 = CIRCLE ( 'NONE', #1532, 2.500000000000002200 ) ; +#650 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#651 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -13.63795574274766600, 21.10709478017819100 ) ) ; +#652 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#653 = DIRECTION ( 'NONE', ( 1.224646799147276800E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#654 = EDGE_CURVE ( 'NONE', #1077, #158, #4727, .T. ) ; +#655 = VERTEX_POINT ( 'NONE', #1802 ) ; +#656 = VERTEX_POINT ( 'NONE', #1988 ) ; +#657 = TOROIDAL_SURFACE ( 'NONE', #2324, 1.250000000000002200, 1.250000000000000000 ) ; +#658 = AXIS2_PLACEMENT_3D ( 'NONE', #4784, #2232, #5204 ) ; +#659 = CARTESIAN_POINT ( 'NONE', ( 2.296212748401168500E-015, -16.25000000000000700, 77.50000000000001400 ) ) ; +#660 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 14.28411609447536500, 27.65513558925198000 ) ) ; +#661 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#662 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.49999999999999800, 1.084202172485504400E-015 ) ) ; +#663 = LINE ( 'NONE', #2349, #528 ) ; +#664 = AXIS2_PLACEMENT_3D ( 'NONE', #2642, #4412, #5171 ) ; +#665 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.059793774530135100, 20.53158018112177500 ) ) ; +#666 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -5.000000000000006200, 76.25000000000001400 ) ) ; +#667 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.673617379884035500E-017, -1.000000000000000000 ) ) ; +#668 = CIRCLE ( 'NONE', #4203, 1.250000000000001100 ) ; +#669 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#670 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#671 = LINE ( 'NONE', #662, #3968 ) ; +#672 = EDGE_CURVE ( 'NONE', #1607, #4071, #2451, .T. ) ; +#673 = CARTESIAN_POINT ( 'NONE', ( 2.296212748401168500E-015, -16.25000000000000700, 77.50000000000001400 ) ) ; +#674 = CIRCLE ( 'NONE', #3686, 1.250000000000000000 ) ; +#675 = EDGE_CURVE ( 'NONE', #4949, #3014, #1307, .T. ) ; +#676 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 12.33788046436500700, 17.15809506162004200 ) ) ; +#677 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#678 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 12.49999999999999300, 80.00000000000001400 ) ) ; +#679 = ORIENTED_EDGE ( 'NONE', *, *, #1621, .T. ) ; +#680 = CARTESIAN_POINT ( 'NONE', ( 36.24999999999997200, -9.999999999999985800, 77.50000000000001400 ) ) ; +#681 = VECTOR ( 'NONE', #2371, 1000.000000000000000 ) ; +#682 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#683 = VECTOR ( 'NONE', #2639, 1000.000000000000000 ) ; +#684 = EDGE_CURVE ( 'NONE', #3573, #3092, #146, .T. ) ; +#685 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000001800, -15.00000000000000900, 77.50000000000001400 ) ) ; +#686 = CARTESIAN_POINT ( 'NONE', ( -7.199102425303746900E-014, -7.500000000000009800, 77.50000000000001400 ) ) ; +#687 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.999999999999994700, 65.56000000000001600 ) ) ; +#688 = ORIENTED_EDGE ( 'NONE', *, *, #2608, .F. ) ; +#689 = ORIENTED_EDGE ( 'NONE', *, *, #5091, .T. ) ; +#690 = CARTESIAN_POINT ( 'NONE', ( 2.021286199229715100E-014, -8.750000000000012400, 75.00000000000001400 ) ) ; +#691 = AXIS2_PLACEMENT_3D ( 'NONE', #2030, #3304, #289 ) ; +#692 = ORIENTED_EDGE ( 'NONE', *, *, #1797, .F. ) ; +#693 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 6.232618304783232000, 8.073976516279847400 ) ) ; +#694 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#695 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#696 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.50000000000000400, 23.79999999999999700 ) ) ; +#697 = VERTEX_POINT ( 'NONE', #1375 ) ; +#698 = AXIS2_PLACEMENT_3D ( 'NONE', #4119, #1549, #4550 ) ; +#699 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999930300, -7.500000000000009800, 77.50000000000001400 ) ) ; +#700 = ORIENTED_EDGE ( 'NONE', *, *, #283, .T. ) ; +#701 = ORIENTED_EDGE ( 'NONE', *, *, #1699, .F. ) ; +#702 = PLANE ( 'NONE', #545 ) ; +#703 = LINE ( 'NONE', #2020, #3002 ) ; +#704 = ORIENTED_EDGE ( 'NONE', *, *, #3777, .T. ) ; +#705 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.500000000000003600, 72.05080000000001000 ) ) ; +#706 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#707 = CARTESIAN_POINT ( 'NONE', ( 32.49999999999998600, -30.00000000000001100, 77.50000000000002800 ) ) ; +#708 = VERTEX_POINT ( 'NONE', #1663 ) ; +#709 = EDGE_CURVE ( 'NONE', #2755, #3724, #2308, .T. ) ; +#710 = ORIENTED_EDGE ( 'NONE', *, *, #752, .T. ) ; +#711 = EDGE_CURVE ( 'NONE', #1919, #448, #3450, .T. ) ; +#712 = VECTOR ( 'NONE', #1585, 1000.000000000000000 ) ; +#713 = ORIENTED_EDGE ( 'NONE', *, *, #4027, .F. ) ; +#714 = ORIENTED_EDGE ( 'NONE', *, *, #1058, .T. ) ; +#715 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 5.547490539279871200, 2.819730593967350300 ) ) ; +#716 = VERTEX_POINT ( 'NONE', #1299 ) ; +#717 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -5.000000000000006200, 77.50000000000001400 ) ) ; +#718 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -32.40000000000000600, 33.80000000000000400 ) ) ; +#719 = VECTOR ( 'NONE', #4532, 1000.000000000000000 ) ; +#720 = EDGE_CURVE ( 'NONE', #124, #3265, #4457, .T. ) ; +#721 = CARTESIAN_POINT ( 'NONE', ( 0.4223964280568915400, -5.033516772804833100, 76.40133273722244700 ) ) ; +#722 = PLANE ( 'NONE', #691 ) ; +#723 = ORIENTED_EDGE ( 'NONE', *, *, #4548, .F. ) ; +#724 = ORIENTED_EDGE ( 'NONE', *, *, #1084, .T. ) ; +#725 = CARTESIAN_POINT ( 'NONE', ( 34.99966210907331300, 0.9072305793907066200, 75.04481179894078500 ) ) ; +#726 = LINE ( 'NONE', #4650, #585 ) ; +#727 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.224646799147275600E-016, 0.0000000000000000000 ) ) ; +#728 = ORIENTED_EDGE ( 'NONE', *, *, #352, .T. ) ; +#729 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#730 = FACE_OUTER_BOUND ( 'NONE', #891, .T. ) ; +#731 = ORIENTED_EDGE ( 'NONE', *, *, #5366, .F. ) ; +#732 = AXIS2_PLACEMENT_3D ( 'NONE', #3529, #3391, #3523 ) ; +#733 = AXIS2_PLACEMENT_3D ( 'NONE', #880, #1723, #5137 ) ; +#734 = CIRCLE ( 'NONE', #3521, 1.199999999999999700 ) ; +#735 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#736 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 3.375949567993425900, 1.018937653941275800 ) ) ; +#737 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#738 = CARTESIAN_POINT ( 'NONE', ( 0.05866565932463636800, 0.2158136743477133400, 75.54366197500800700 ) ) ; +#739 = CIRCLE ( 'NONE', #3558, 1.250000000000001100 ) ; +#740 = AXIS2_PLACEMENT_3D ( 'NONE', #763, #3773, #1206 ) ; +#741 = CIRCLE ( 'NONE', #460, 1.199999999999992600 ) ; +#742 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 15.00000000000000000, 40.00000000000000700 ) ) ; +#743 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 15.00000000000000000, 1.301042606982605300E-015 ) ) ; +#744 = LINE ( 'NONE', #4362, #3170 ) ; +#745 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -2.775557561562891400E-016, 1.000000000000000000 ) ) ; +#746 = ORIENTED_EDGE ( 'NONE', *, *, #1457, .F. ) ; +#747 = PLANE ( 'NONE', #4312 ) ; +#748 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#749 = CIRCLE ( 'NONE', #4086, 3.189999999999998600 ) ; +#750 = EDGE_CURVE ( 'NONE', #4696, #5252, #22, .T. ) ; +#751 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#752 = EDGE_CURVE ( 'NONE', #4704, #462, #4512, .T. ) ; +#753 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.4417396167301923500, 2.523993637272798500 ) ) ; +#754 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -15.00000000000000900, 77.50000000000001400 ) ) ; +#755 = CARTESIAN_POINT ( 'NONE', ( -4.784055881590617600E-005, 1.076140176381460900, 75.00911505914291400 ) ) ; +#756 = LINE ( 'NONE', #4341, #5173 ) ; +#757 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.224646799147276800E-016, 0.0000000000000000000 ) ) ; +#758 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999994300, 10.00000000000002000, 68.75000000000001400 ) ) ; +#759 = CARTESIAN_POINT ( 'NONE', ( -1.486354495723666100E-012, 14.05754796641223200, 25.91615084544687500 ) ) ; +#760 = VERTEX_POINT ( 'NONE', #902 ) ; +#761 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#762 = EDGE_CURVE ( 'NONE', #1189, #2522, #1027, .T. ) ; +#763 = CARTESIAN_POINT ( 'NONE', ( -3.061616997867956200E-016, 5.000000000000000900, 77.50000000000001400 ) ) ; +#764 = ADVANCED_FACE ( 'NONE', ( #2184 ), #1122, .F. ) ; +#765 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 10.70761355939463000, 21.18578706046598400 ) ) ; +#766 = EDGE_LOOP ( 'NONE', ( #1183, #1719, #4942 ) ) ; +#767 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999992900, 3.750000000000024900, 75.00000000000001400 ) ) ; +#768 = AXIS2_PLACEMENT_3D ( 'NONE', #4163, #4591, #1155 ) ; +#769 = EDGE_LOOP ( 'NONE', ( #2131, #2256, #2338, #2682 ) ) ; +#770 = ORIENTED_EDGE ( 'NONE', *, *, #1835, .F. ) ; +#771 = VERTEX_POINT ( 'NONE', #867 ) ; +#772 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -14.99100622546988300, 16.15537812313072400 ) ) ; +#773 = AXIS2_PLACEMENT_3D ( 'NONE', #616, #3207, #191 ) ; +#774 = PERSON_AND_ORGANIZATION ( #5121, #5438 ) ; +#775 = CARTESIAN_POINT ( 'NONE', ( 3.061616997868437900E-016, -7.459310946700275200E-015, 77.50000000000001400 ) ) ; +#776 = VERTEX_POINT ( 'NONE', #687 ) ; +#777 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#778 = ORIENTED_EDGE ( 'NONE', *, *, #4436, .T. ) ; +#779 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -30.00000000000000000, 80.00000000000000000 ) ) ; +#780 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000001400, 10.42569661803113100, 11.21446058877376100 ) ) ; +#781 = VECTOR ( 'NONE', #2268, 1000.000000000000000 ) ; +#782 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 9.911592121056155900, 17.82950658848763600 ) ) ; +#783 = ORIENTED_EDGE ( 'NONE', *, *, #4535, .F. ) ; +#784 = VERTEX_POINT ( 'NONE', #718 ) ; +#785 = EDGE_LOOP ( 'NONE', ( #1658, #3209, #3727, #244 ) ) ; +#786 = VECTOR ( 'NONE', #2641, 1000.000000000000000 ) ; +#787 = ORIENTED_EDGE ( 'NONE', *, *, #627, .T. ) ; +#788 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#789 = ORIENTED_EDGE ( 'NONE', *, *, #2313, .T. ) ; +#790 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 4.039084703549462100, 4.883306129551721500 ) ) ; +#791 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #1230 ) ; +#792 = EDGE_CURVE ( 'NONE', #112, #4484, #4588, .T. ) ; +#793 = ORIENTED_EDGE ( 'NONE', *, *, #5271, .F. ) ; +#794 = EDGE_CURVE ( 'NONE', #3625, #1001, #3585, .T. ) ; +#795 = EDGE_LOOP ( 'NONE', ( #2005, #932, #3491, #1130 ) ) ; +#796 = VECTOR ( 'NONE', #3068, 1000.000000000000000 ) ; +#797 = CARTESIAN_POINT ( 'NONE', ( 37.50099999999998300, -25.50000000000000400, 24.99999999999999600 ) ) ; +#798 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.387778780781444500E-015, 0.0000000000000000000 ) ) ; +#799 = ORIENTED_EDGE ( 'NONE', *, *, #1154, .F. ) ; +#800 = ORIENTED_EDGE ( 'NONE', *, *, #4258, .T. ) ; +#801 = ADVANCED_FACE ( 'NONE', ( #4325 ), #2039, .T. ) ; +#802 = FACE_OUTER_BOUND ( 'NONE', #3463, .T. ) ; +#803 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#804 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 4.351609436009145100, 1.705732734501687100 ) ) ; +#805 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -32.40000000000000600, 35.00000000000000000 ) ) ; +#806 = VECTOR ( 'NONE', #4023, 1000.000000000000000 ) ; +#807 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#808 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#809 = LINE ( 'NONE', #1432, #2969 ) ; +#810 = AXIS2_PLACEMENT_3D ( 'NONE', #4720, #1713, #4294 ) ; +#811 = AXIS2_PLACEMENT_3D ( 'NONE', #2214, #5183, #2655 ) ; +#812 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#813 = VECTOR ( 'NONE', #4855, 1000.000000000000000 ) ; +#814 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, -35.00000000000000700, 55.00000000000000700 ) ) ; +#815 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -35.00000000000000000, 31.81000000000000600 ) ) ; +#816 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#817 = VERTEX_POINT ( 'NONE', #696 ) ; +#818 = AXIS2_PLACEMENT_3D ( 'NONE', #2580, #5528, #3000 ) ; +#819 = CIRCLE ( 'NONE', #4273, 5.050800000000001500 ) ; +#820 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -12.55080000000000200, 67.00000000000001400 ) ) ; +#821 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#822 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#823 = CARTESIAN_POINT ( 'NONE', ( 0.01260596116156036600, 0.4405585932120743600, 75.28204086762072200 ) ) ; +#824 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9961946980917454300, 0.08715574274765867900 ) ) ; +#825 = EDGE_CURVE ( 'NONE', #817, #4470, #4187, .T. ) ; +#826 = CYLINDRICAL_SURFACE ( 'NONE', #3328, 0.5000000000000004400 ) ; +#827 = EDGE_CURVE ( 'NONE', #1779, #3625, #5422, .T. ) ; +#828 = ADVANCED_FACE ( 'NONE', ( #5290 ), #5169, .T. ) ; +#829 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#830 = LINE ( 'NONE', #2604, #683 ) ; +#831 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -2.220446049250313400E-014, 80.00000000000001400 ) ) ; +#832 = EDGE_CURVE ( 'NONE', #39, #2530, #749, .T. ) ; +#833 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000700, 1.162404174173051300, 75.00000000000001400 ) ) ; +#834 = CARTESIAN_POINT ( 'NONE', ( 33.19586565910233100, -9.238758687081501700, 77.40480650930256000 ) ) ; +#835 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999997200, -8.749999999999989300, 77.50000000000001400 ) ) ; +#836 = ORIENTED_EDGE ( 'NONE', *, *, #2966, .F. ) ; +#837 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#838 = ORIENTED_EDGE ( 'NONE', *, *, #3636, .T. ) ; +#839 = EDGE_LOOP ( 'NONE', ( #2696, #3411, #2035, #1810 ) ) ; +#840 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#841 = ORIENTED_EDGE ( 'NONE', *, *, #476, .F. ) ; +#842 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#843 = VERTEX_POINT ( 'NONE', #240 ) ; +#844 = AXIS2_PLACEMENT_3D ( 'NONE', #5212, #4891, #4881 ) ; +#845 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000003600, 6.365996338613506100, 3.742041755643162700 ) ) ; +#846 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#847 = ORIENTED_EDGE ( 'NONE', *, *, #5194, .F. ) ; +#848 = VECTOR ( 'NONE', #4136, 1000.000000000000000 ) ; +#849 = ORIENTED_EDGE ( 'NONE', *, *, #1154, .T. ) ; +#850 = ORIENTED_EDGE ( 'NONE', *, *, #5051, .F. ) ; +#851 = AXIS2_PLACEMENT_3D ( 'NONE', #5283, #2758, #1645 ) ; +#852 = ORIENTED_EDGE ( 'NONE', *, *, #4289, .F. ) ; +#853 = CARTESIAN_POINT ( 'NONE', ( 34.67174392874569100, -5.020466397679241400, 76.25047654481397800 ) ) ; +#854 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#855 = CYLINDRICAL_SURFACE ( 'NONE', #1498, 3.189999999999998600 ) ; +#856 = EDGE_LOOP ( 'NONE', ( #954, #4060, #4808, #1740, #5364, #5320 ) ) ; +#857 = ADVANCED_FACE ( 'NONE', ( #3050 ), #308, .F. ) ; +#858 = ORIENTED_EDGE ( 'NONE', *, *, #85, .T. ) ; +#859 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, -23.00000000000000400, 0.0000000000000000000 ) ) ; +#860 = EDGE_LOOP ( 'NONE', ( #4499, #3394, #4878, #5031, #3544, #1943, #5516, #3819, #4132, #1161, #3619, #123, #1579, #728, #4004, #746, #800, #2392, #701, #5446, #559, #4989, #2953, #445, #3059 ) ) ; +#861 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -30.00000000000001100, 77.50000000000000000 ) ) ; +#862 = ORIENTED_EDGE ( 'NONE', *, *, #4961, .T. ) ; +#863 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#864 = CYLINDRICAL_SURFACE ( 'NONE', #5518, 2.500000000000002200 ) ; +#865 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 1, ( + ( #872, #2178 ), + ( #3036, #4328 ), + ( #1751, #1324 ), + ( #888, #3894 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 1.000000000000000000), + ( 0.8047378541243658300, 0.8047378541243658300), + ( 0.8047378541243658300, 0.8047378541243658300), + ( 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#866 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#867 = CARTESIAN_POINT ( 'NONE', ( 2.266215559059169900E-014, -18.75000000000000700, 75.00000000000001400 ) ) ; +#868 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000003100, 13.91802007919761100, 24.94254222814239000 ) ) ; +#869 = VERTEX_POINT ( 'NONE', #103 ) ; +#870 = ORIENTED_EDGE ( 'NONE', *, *, #3169, .T. ) ; +#871 = CIRCLE ( 'NONE', #487, 1.250000000000001100 ) ; +#872 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000700, 5.928593550334433700E-014, 0.0000000000000000000 ) ) ; +#873 = EDGE_CURVE ( 'NONE', #1131, #3460, #1902, .T. ) ; +#874 = EDGE_CURVE ( 'NONE', #4946, #4949, #2916, .T. ) ; +#875 = ORIENTED_EDGE ( 'NONE', *, *, #1874, .T. ) ; +#876 = LINE ( 'NONE', #290, #2019 ) ; +#877 = CARTESIAN_POINT ( 'NONE', ( 33.08237492178616900, -5.886553176648783700, 77.43347912600724200 ) ) ; +#878 = CYLINDRICAL_SURFACE ( 'NONE', #4392, 5.050799999999998000 ) ; +#879 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -32.50000000000000700, 55.50000000000000700 ) ) ; +#880 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, 18.28184403566698200, 60.00000000000000700 ) ) ; +#881 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#882 = CARTESIAN_POINT ( 'NONE', ( 0.09043176232672453500, -15.12339090195247900, 75.68651302813347600 ) ) ; +#883 = EDGE_CURVE ( 'NONE', #4071, #1607, #4044, .T. ) ; +#884 = CIRCLE ( 'NONE', #2705, 1.199999999999999700 ) ; +#885 = AXIS2_PLACEMENT_3D ( 'NONE', #543, #3567, #988 ) ; +#886 = CYLINDRICAL_SURFACE ( 'NONE', #5420, 5.050799999999998000 ) ; +#887 = ADVANCED_FACE ( 'NONE', ( #608 ), #5034, .T. ) ; +#888 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000700, 15.00000000000000000, 40.00000000000001400 ) ) ; +#889 = CYLINDRICAL_SURFACE ( 'NONE', #1753, 1.200000000000006600 ) ; +#890 = AXIS2_PLACEMENT_3D ( 'NONE', #1763, #4339, #1339 ) ; +#891 = EDGE_LOOP ( 'NONE', ( #5151, #4137, #1228, #1283 ) ) ; +#892 = APPROVAL ( #5478, 'UNSPECIFIED' ) ; +#893 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995700, 1.249999999999992700, 77.50000000000001400 ) ) ; +#894 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#895 = VECTOR ( 'NONE', #81, 999.9999999999998900 ) ; +#896 = CARTESIAN_POINT ( 'NONE', ( 2.296831729037852100E-014, -20.00000000000000700, 75.00000000000001400 ) ) ; +#897 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 15.00000000000000400, 16.56854249492381500 ) ) ; +#898 = CARTESIAN_POINT ( 'NONE', ( 0.09712465669868561300, 13.19006527892301700, 69.10934566586513500 ) ) ; +#899 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#900 = CIRCLE ( 'NONE', #1427, 3.189999999999998600 ) ; +#901 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.940206225469880900, 10.46841981887819600 ) ) ; +#902 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -30.00000000000001400, 61.20000000000000300 ) ) ; +#903 = EDGE_CURVE ( 'NONE', #161, #3322, #2782, .T. ) ; +#904 = EDGE_CURVE ( 'NONE', #3668, #2410, #3918, .T. ) ; +#905 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#906 = EDGE_LOOP ( 'NONE', ( #2267, #2939, #793, #724 ) ) ; +#907 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 8.888276838118539300, 7.750054011216547200 ) ) ; +#908 = EDGE_LOOP ( 'NONE', ( #5189, #4296, #2754, #94, #40, #4816 ) ) ; +#909 = CARTESIAN_POINT ( 'NONE', ( 2.755455298081397300E-015, -20.00000000000000700, 77.50000000000001400 ) ) ; +#910 = DIRECTION ( 'NONE', ( -1.734723475976806800E-016, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#911 = ORIENTED_EDGE ( 'NONE', *, *, #1952, .T. ) ; +#912 = CARTESIAN_POINT ( 'NONE', ( 36.24999999999995000, 3.750000000000026600, 77.50000000000001400 ) ) ; +#913 = ADVANCED_FACE ( 'NONE', ( #488, #4916, #1628, #3778, #2656, #1494 ), #2979, .T. ) ; +#914 = ORIENTED_EDGE ( 'NONE', *, *, #1457, .T. ) ; +#915 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#916 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#917 = ORIENTED_EDGE ( 'NONE', *, *, #2495, .F. ) ; +#918 = PLANE ( 'NONE', #2632 ) ; +#919 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999994300, -6.249999999999982200, 75.00000000000001400 ) ) ; +#920 = ORIENTED_EDGE ( 'NONE', *, *, #3422, .T. ) ; +#921 = AXIS2_PLACEMENT_3D ( 'NONE', #1357, #1340, #1331 ) ; +#922 = FACE_OUTER_BOUND ( 'NONE', #1405, .T. ) ; +#923 = CARTESIAN_POINT ( 'NONE', ( -1.250000000000002400, 3.750000000000000900, 77.50000000000001400 ) ) ; +#924 = VERTEX_POINT ( 'NONE', #5493 ) ; +#925 = AXIS2_PLACEMENT_3D ( 'NONE', #1969, #4110, #4958 ) ; +#926 = ORIENTED_EDGE ( 'NONE', *, *, #70, .F. ) ; +#927 = ORIENTED_EDGE ( 'NONE', *, *, #3525, .F. ) ; +#928 = LINE ( 'NONE', #3881, #3212 ) ; +#929 = EDGE_LOOP ( 'NONE', ( #2058, #203, #3929, #329 ) ) ; +#930 = AXIS2_PLACEMENT_3D ( 'NONE', #3651, #1090, #4094 ) ; +#931 = VERTEX_POINT ( 'NONE', #5089 ) ; +#932 = ORIENTED_EDGE ( 'NONE', *, *, #1376, .F. ) ; +#933 = LINE ( 'NONE', #1367, #4092 ) ; +#934 = CARTESIAN_POINT ( 'NONE', ( 34.74776692697534500, -5.012756852080509700, 76.09432346314783000 ) ) ; +#935 = EDGE_CURVE ( 'NONE', #1876, #4278, #4779, .T. ) ; +#936 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 9.999999999999994700, 69.95000000000003100 ) ) ; +#937 = ORIENTED_EDGE ( 'NONE', *, *, #2741, .F. ) ; +#938 = VERTEX_POINT ( 'NONE', #2591 ) ; +#939 = CARTESIAN_POINT ( 'NONE', ( 27.45000000000000300, -32.40000000000000600, 35.00000000000000000 ) ) ; +#940 = VECTOR ( 'NONE', #4851, 1000.000000000000000 ) ; +#941 = CLOSED_SHELL ( 'NONE', ( #4925, #4847, #3335, #5223, #1258, #3867, #4303, #3188, #3452, #3564, #3814, #1313, #2998, #4269, #3901, #2355, #3782, #4903, #406, #887, #4057, #2270, #5246, #3164, #465, #1731, #4871, #2190, #3533, #4246, #1500, #1292, #588, #2245, #3085, #4694, #3997, #1082, #1896, #1448, #4517, #5321, #3368, #489, #965, #3955, #5484, #4660, #196, #3976, #913, #142, #5515, #557, #1958, #2671, #372, #2299, #5146, #3222, #5196, #5054, #1423, #857, #2779, #3924, #344, #4410, #3843, #166, #3054, #5087, #4095, #4439, #14, #4719, #4210, #4031, #1343, #1201, #1815, #3392, #5270, #4327, #2380, #943, #2525, #2719, #2168, #3637, #3507, #1643, #1838, #5114, #1478, #4355, #764, #4820, #2563, #4458, #3479, #1616, #509, #2102, #1870, #4741, #2806, #1370, #2950, #3133, #2590, #611, #1048, #2218, #2502, #2702, #2133, #2321, #5170, #5030, #90, #1675, #3589, #2615, #641, #4787, #801, #997, #434, #1924, #1782, #5461, #118, #3427, #5295, #2650, #4634, #3105, #828, #2750, #1759, #5432, #4386, #3035, #1227, #4487, #67, #2071, #537, #1704, #3613, #4767, #2920, #1393, #2977, #1024, #37, #218 ) ) ; +#942 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -6.736790197968178700E-017, -1.000000000000000000 ) ) ; +#943 = ADVANCED_FACE ( 'NONE', ( #3640, #347 ), #436, .F. ) ; +#944 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 3.293663083519129700E-014, 2.500000000000000000 ) ) ; +#945 = FACE_OUTER_BOUND ( 'NONE', #1846, .T. ) ; +#946 = EDGE_CURVE ( 'NONE', #1474, #4344, #4655, .T. ) ; +#947 = LINE ( 'NONE', #3252, #4843 ) ; +#948 = CYLINDRICAL_SURFACE ( 'NONE', #5041, 3.189999999999998600 ) ; +#949 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, -30.00000000000001100, 80.00000000000001400 ) ) ; +#950 = LINE ( 'NONE', #5294, #813 ) ; +#951 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#952 = EDGE_CURVE ( 'NONE', #2239, #4411, #206, .T. ) ; +#953 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999997900, -16.25000000000000700, 77.50000000000001400 ) ) ; +#954 = ORIENTED_EDGE ( 'NONE', *, *, #4850, .T. ) ; +#955 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000700, -6.095291891370648900, 75.00000000000001400 ) ) ; +#956 = AXIS2_PLACEMENT_3D ( 'NONE', #2213, #5182, #2654 ) ; +#957 = VECTOR ( 'NONE', #959, 1000.000000000000000 ) ; +#958 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 1.682687755469722400, 2.934554588948498300 ) ) ; +#959 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807100E-016 ) ) ; +#960 = AXIS2_PLACEMENT_3D ( 'NONE', #3003, #2583, #5118 ) ; +#961 = CYLINDRICAL_SURFACE ( 'NONE', #2764, 2.500000000000002200 ) ; +#962 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, -6.591949208711870900E-015, 77.50000000000001400 ) ) ; +#963 = CARTESIAN_POINT ( 'NONE', ( 2.211452530716902400, -8.678956949244765800, 77.48431997868468100 ) ) ; +#964 = CARTESIAN_POINT ( 'NONE', ( 35.00043791116636500, -5.941384749330092400, 75.02911346620028600 ) ) ; +#965 = ADVANCED_FACE ( 'NONE', ( #1369 ), #865, .F. ) ; +#966 = VECTOR ( 'NONE', #3357, 1000.000000000000000 ) ; +#967 = CARTESIAN_POINT ( 'NONE', ( 2.296212748401168500E-015, -16.25000000000000700, 76.25000000000001400 ) ) ; +#968 = CARTESIAN_POINT ( 'NONE', ( 1.684508329464213600E-014, 5.000000000000000900, 75.00000000000001400 ) ) ; +#969 = EDGE_LOOP ( 'NONE', ( #5263, #322, #5231, #5048, #3542, #5010, #3393, #2625, #3677, #34 ) ) ; +#970 = CARTESIAN_POINT ( 'NONE', ( 34.99672581334017000, -5.656626194738488600, 75.13927510370879800 ) ) ; +#971 = EDGE_CURVE ( 'NONE', #4234, #2955, #80, .T. ) ; +#972 = ORIENTED_EDGE ( 'NONE', *, *, #2024, .T. ) ; +#973 = ORIENTED_EDGE ( 'NONE', *, *, #2457, .F. ) ; +#974 = EDGE_CURVE ( 'NONE', #3014, #4880, #3513, .T. ) ; +#975 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 9.459599108786243000, 16.10642498215275600 ) ) ; +#976 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 4.995888024160122700, 2.279757744910321000 ) ) ; +#977 = EDGE_LOOP ( 'NONE', ( #4752, #4301, #4598, #1661 ) ) ; +#978 = VERTEX_POINT ( 'NONE', #3911 ) ; +#979 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -20.50000000000000400, 2.500000000000001300 ) ) ; +#980 = VERTEX_POINT ( 'NONE', #1345 ) ; +#981 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.500000000000008000, 15.49999999999998600 ) ) ; +#982 = CARTESIAN_POINT ( 'NONE', ( 34.99229009476729900, -5.523103103673578000, 75.22171533840320000 ) ) ; +#983 = CIRCLE ( 'NONE', #2449, 0.5000000000000004400 ) ; +#984 = EDGE_LOOP ( 'NONE', ( #1104, #1380, #2533, #847, #4998, #3655 ) ) ; +#985 = EDGE_CURVE ( 'NONE', #4209, #4062, #1232, .T. ) ; +#986 = ORIENTED_EDGE ( 'NONE', *, *, #750, .F. ) ; +#987 = VERTEX_POINT ( 'NONE', #2631 ) ; +#988 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#989 = CIRCLE ( 'NONE', #60, 3.189999999999998600 ) ; +#990 = EDGE_LOOP ( 'NONE', ( #2226, #1795, #29, #4135 ) ) ; +#991 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#992 = CARTESIAN_POINT ( 'NONE', ( 34.96550830153883300, -5.297526755518307000, 75.42654006001960500 ) ) ; +#993 = ORIENTED_EDGE ( 'NONE', *, *, #33, .F. ) ; +#994 = AXIS2_PLACEMENT_3D ( 'NONE', #5384, #274, #2432 ) ; +#995 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#996 = VERTEX_POINT ( 'NONE', #473 ) ; +#997 = ADVANCED_FACE ( 'NONE', ( #4522 ), #5479, .T. ) ; +#998 = LINE ( 'NONE', #5338, #5264 ) ; +#999 = CARTESIAN_POINT ( 'NONE', ( 2.602085213965245700E-015, 3.645280924927797500, 1.193323610190698100 ) ) ; +#1000 = AXIS2_PLACEMENT_3D ( 'NONE', #5369, #2850, #259 ) ; +#1001 = VERTEX_POINT ( 'NONE', #3061 ) ; +#1002 = ORIENTED_EDGE ( 'NONE', *, *, #4040, .T. ) ; +#1003 = LINE ( 'NONE', #3718, #4304 ) ; +#1004 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1005 = CARTESIAN_POINT ( 'NONE', ( 34.94262786968303700, -5.204307562147426400, 75.55001294024458500 ) ) ; +#1006 = ORIENTED_EDGE ( 'NONE', *, *, #3278, .F. ) ; +#1007 = LINE ( 'NONE', #1700, #3159 ) ; +#1008 = EDGE_CURVE ( 'NONE', #4071, #4470, #1093, .T. ) ; +#1009 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -2.220446049250313400E-014, 80.00000000000001400 ) ) ; +#1010 = EDGE_CURVE ( 'NONE', #931, #2222, #3243, .T. ) ; +#1011 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.673617379884035500E-017, -1.000000000000000000 ) ) ; +#1012 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1013 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -12.55080000000001100, 22.10328947826994300 ) ) ; +#1014 = CYLINDRICAL_SURFACE ( 'NONE', #2951, 1.199999999999992600 ) ; +#1015 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 6.659628598829320000, 8.884830460205360900 ) ) ; +#1016 = TOROIDAL_SURFACE ( 'NONE', #4128, 1.250000000000002200, 1.250000000000000000 ) ; +#1017 = EDGE_CURVE ( 'NONE', #1748, #2074, #2105, .T. ) ; +#1018 = VECTOR ( 'NONE', #4584, 1000.000000000000000 ) ; +#1019 = DIRECTION ( 'NONE', ( -7.347880794884347500E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1020 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4680, #1676, #2551, #5491, #2978, #396, #3403, #5454, #2930, #348, #3362, #780, #3784, #1221, #4226, #1647, #4656, #2085, #5057, #2520, #5472, #2954, #365, #3380, #804, #3803, #1238, #4249, #1667, #4670, #2106, #5082 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.01129646993606726400, 0.01694470490410089600, 0.02259293987213452700, 0.02541705735615135100, 0.02824117484016817500, 0.03106529232418500300, 0.03388940980820182700, 0.03530146855021024100, 0.03671352729221865500, 0.03812558603422706200, 0.03953764477623548200, 0.04094970351824388900, 0.04236176226025230300, 0.04377382100226071700, 0.04518587974426913800 ), + .UNSPECIFIED. ) ; +#1021 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999995700, 1.249999999999992200, 77.50000000000001400 ) ) ; +#1022 = TOROIDAL_SURFACE ( 'NONE', #1173, 1.250000000000002200, 1.250000000000000000 ) ; +#1023 = CARTESIAN_POINT ( 'NONE', ( 34.86748372484148500, -5.070795367731877300, 75.81484106229346800 ) ) ; +#1024 = ADVANCED_FACE ( 'NONE', ( #4394 ), #5228, .F. ) ; +#1025 = VERTEX_POINT ( 'NONE', #3114 ) ; +#1026 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 12.49999999999999500, 40.00000000000001400 ) ) ; +#1027 = CIRCLE ( 'NONE', #1780, 2.500000000000002200 ) ; +#1028 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.940206225469880900, 10.46841981887819600 ) ) ; +#1029 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.999999999999994700, 68.75000000000001400 ) ) ; +#1030 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1031 = AXIS2_PLACEMENT_3D ( 'NONE', #1029, #4024, #1463 ) ; +#1032 = FACE_OUTER_BOUND ( 'NONE', #253, .T. ) ; +#1033 = CARTESIAN_POINT ( 'NONE', ( 9.850950975147269300E-014, 7.444133282821543000, 5.262782998143171300 ) ) ; +#1034 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000001800, -15.00000000000000900, 78.75000000000001400 ) ) ; +#1035 = AXIS2_PLACEMENT_3D ( 'NONE', #1186, #4600, #4192 ) ; +#1036 = EDGE_LOOP ( 'NONE', ( #2289, #2562, #4161, #3895 ) ) ; +#1037 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.220446049250313400E-014, 80.00000000000001400 ) ) ; +#1038 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891400E-016, -1.000000000000000000 ) ) ; +#1039 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1040 = ORIENTED_EDGE ( 'NONE', *, *, #359, .F. ) ; +#1041 = ORIENTED_EDGE ( 'NONE', *, *, #2090, .F. ) ; +#1042 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1043 = EDGE_LOOP ( 'NONE', ( #2264, #395, #419, #2887 ) ) ; +#1044 = EDGE_CURVE ( 'NONE', #5252, #4077, #819, .T. ) ; +#1045 = EDGE_CURVE ( 'NONE', #980, #3468, #5352, .T. ) ; +#1046 = SHAPE_DEFINITION_REPRESENTATION ( #3361, #594 ) ; +#1047 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1048 = ADVANCED_FACE ( 'NONE', ( #3103 ), #5072, .T. ) ; +#1049 = CARTESIAN_POINT ( 'NONE', ( -1.847120693269588900E-013, 10.71934895929019200, 11.99236429966840800 ) ) ; +#1050 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1051 = ORIENTED_EDGE ( 'NONE', *, *, #323, .F. ) ; +#1052 = LINE ( 'NONE', #1351, #3339 ) ; +#1053 = ORIENTED_EDGE ( 'NONE', *, *, #3432, .F. ) ; +#1054 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1055 = VERTEX_POINT ( 'NONE', #5008 ) ; +#1056 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -7.500000000000003600, 67.00000000000001400 ) ) ; +#1057 = ORIENTED_EDGE ( 'NONE', *, *, #1446, .F. ) ; +#1058 = EDGE_CURVE ( 'NONE', #495, #2959, #674, .T. ) ; +#1059 = LINE ( 'NONE', #2186, #3077 ) ; +#1060 = ORIENTED_EDGE ( 'NONE', *, *, #1086, .F. ) ; +#1061 = AXIS2_PLACEMENT_3D ( 'NONE', #3760, #1195, #4197 ) ; +#1062 = ORIENTED_EDGE ( 'NONE', *, *, #5103, .T. ) ; +#1063 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1064 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#1065 = EDGE_LOOP ( 'NONE', ( #582, #2080 ) ) ; +#1066 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#1067 = CARTESIAN_POINT ( 'NONE', ( 0.3678513576461585600, -7.308762734323556900E-015, 76.30535135764617400 ) ) ; +#1068 = CARTESIAN_POINT ( 'NONE', ( 34.81499345864850900, -5.030615154348634400, 75.95623853707348900 ) ) ; +#1069 = TOROIDAL_SURFACE ( 'NONE', #88, 1.250000000000002200, 1.250000000000000000 ) ; +#1070 = AXIS2_PLACEMENT_3D ( 'NONE', #4503, #1934, #3986 ) ; +#1071 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 5.928593550334433700E-014, 2.500000000000000000 ) ) ; +#1072 = CARTESIAN_POINT ( 'NONE', ( 34.91912211607847600, -4.999999999999994700, 76.19307411313400300 ) ) ; +#1073 = ORIENTED_EDGE ( 'NONE', *, *, #2713, .T. ) ; +#1074 = ORIENTED_EDGE ( 'NONE', *, *, #3290, .T. ) ; +#1075 = CYLINDRICAL_SURFACE ( 'NONE', #5274, 2.500000000000002200 ) ; +#1076 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1077 = VERTEX_POINT ( 'NONE', #5423 ) ; +#1078 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -35.00100000000001900, 72.50000000000001400 ) ) ; +#1079 = CYLINDRICAL_SURFACE ( 'NONE', #2565, 3.189999999999998600 ) ; +#1080 = CARTESIAN_POINT ( 'NONE', ( 36.24999999999998600, -18.74999999999998200, 77.50000000000001400 ) ) ; +#1081 = CARTESIAN_POINT ( 'NONE', ( 34.74776692697534500, -5.012756852080509700, 76.09432346314783000 ) ) ; +#1082 = ADVANCED_FACE ( 'NONE', ( #1826 ), #722, .F. ) ; +#1083 = CIRCLE ( 'NONE', #2877, 1.000000000000000900 ) ; +#1084 = EDGE_CURVE ( 'NONE', #1798, #647, #1966, .T. ) ; +#1085 = VECTOR ( 'NONE', #942, 1000.000000000000000 ) ; +#1086 = EDGE_CURVE ( 'NONE', #3480, #448, #5099, .T. ) ; +#1087 = CARTESIAN_POINT ( 'NONE', ( 1.530808498934121300E-015, -10.00000000000001200, 77.50000000000001400 ) ) ; +#1088 = CARTESIAN_POINT ( 'NONE', ( 2.296212748401168500E-015, -16.25000000000000700, 77.50000000000001400 ) ) ; +#1089 = LINE ( 'NONE', #4463, #2097 ) ; +#1090 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#1091 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1092 = ORIENTED_EDGE ( 'NONE', *, *, #3582, .F. ) ; +#1093 = LINE ( 'NONE', #3099, #2242 ) ; +#1094 = CIRCLE ( 'NONE', #1891, 1.200000000000006600 ) ; +#1095 = ORIENTED_EDGE ( 'NONE', *, *, #3461, .T. ) ; +#1096 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1097 = AXIS2_PLACEMENT_3D ( 'NONE', #3384, #416, #6 ) ; +#1098 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 11.57951598025831100, 26.25041600423952900 ) ) ; +#1099 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2200, #4336, #1336, #3904, #898, #3470, #468, #3045, #30, #2620 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 8.314851564682838800E-020, 0.001065464361979374800, 0.002130928723958749500, 0.003196393085938124300, 0.004261857447917499100 ), + .UNSPECIFIED. ) ; +#1100 = CIRCLE ( 'NONE', #1529, 2.500000000000002200 ) ; +#1101 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #351, #494, #1184, #315 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( -1.000003258865093200E-005, 0.0002867084790091536800 ), + .UNSPECIFIED. ) ; +#1102 = AXIS2_PLACEMENT_3D ( 'NONE', #3580, #1004, #3994 ) ; +#1103 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, 9.999999999999994700, 68.75000000000001400 ) ) ; +#1104 = ORIENTED_EDGE ( 'NONE', *, *, #1550, .T. ) ; +#1105 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#1106 = AXIS2_PLACEMENT_3D ( 'NONE', #408, #2123, #3828 ) ; +#1107 = ORIENTED_EDGE ( 'NONE', *, *, #1410, .F. ) ; +#1108 = ORIENTED_EDGE ( 'NONE', *, *, #5226, .F. ) ; +#1109 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -24.99999999999997900, 68.75000000000001400 ) ) ; +#1110 = CARTESIAN_POINT ( 'NONE', ( 37.50099999999998300, -25.50000000000000400, 41.29999999999999700 ) ) ; +#1111 = ORIENTED_EDGE ( 'NONE', *, *, #175, .T. ) ; +#1112 = EDGE_CURVE ( 'NONE', #2375, #843, #2847, .T. ) ; +#1113 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1114 = VERTEX_POINT ( 'NONE', #2452 ) ; +#1115 = EDGE_CURVE ( 'NONE', #324, #5134, #541, .T. ) ; +#1116 = ORIENTED_EDGE ( 'NONE', *, *, #2795, .T. ) ; +#1117 = CARTESIAN_POINT ( 'NONE', ( 0.2522330730247215900, -5.012756852080515000, 76.09432346314795800 ) ) ; +#1118 = VECTOR ( 'NONE', #4931, 1000.000000000000000 ) ; +#1119 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 11.86200147227739700, 15.40941696133152500 ) ) ; +#1120 = EDGE_LOOP ( 'NONE', ( #3013, #4610, #4735, #2863 ) ) ; +#1121 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1122 = PLANE ( 'NONE', #2662 ) ; +#1123 = EDGE_LOOP ( 'NONE', ( #4307, #377, #1657, #4897, #3530, #5475, #862, #99, #4999, #3608 ) ) ; +#1124 = EDGE_CURVE ( 'NONE', #2464, #3448, #3973, .T. ) ; +#1125 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.00000000000000000, 68.75000000000001400 ) ) ; +#1126 = ORIENTED_EDGE ( 'NONE', *, *, #4853, .T. ) ; +#1127 = VECTOR ( 'NONE', #4125, 1000.000000000000000 ) ; +#1128 = ORIENTED_EDGE ( 'NONE', *, *, #935, .F. ) ; +#1129 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995700, -7.372574772901430200E-015, 77.50000000000001400 ) ) ; +#1130 = ORIENTED_EDGE ( 'NONE', *, *, #3821, .F. ) ; +#1131 = VERTEX_POINT ( 'NONE', #4945 ) ; +#1132 = ORIENTED_EDGE ( 'NONE', *, *, #1044, .T. ) ; +#1133 = FACE_OUTER_BOUND ( 'NONE', #860, .T. ) ; +#1134 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -30.00000000000001400, 60.00000000000000000 ) ) ; +#1135 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1136 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1137 = AXIS2_PLACEMENT_3D ( 'NONE', #463, #275, #292 ) ; +#1138 = ORIENTED_EDGE ( 'NONE', *, *, #5063, .F. ) ; +#1139 = ORIENTED_EDGE ( 'NONE', *, *, #2544, .T. ) ; +#1140 = LINE ( 'NONE', #2003, #2158 ) ; +#1141 = AXIS2_PLACEMENT_3D ( 'NONE', #1134, #4134, #1564 ) ; +#1142 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 8.423631889003845100, 6.866213077632172800 ) ) ; +#1143 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, 9.999999999999994700, 67.55000000000002600 ) ) ; +#1144 = CARTESIAN_POINT ( 'NONE', ( 13.00000000000000200, -35.00100000000001900, 55.50000000000000700 ) ) ; +#1145 = ORIENTED_EDGE ( 'NONE', *, *, #4649, .F. ) ; +#1146 = LINE ( 'NONE', #2065, #5402 ) ; +#1147 = AXIS2_PLACEMENT_3D ( 'NONE', #4053, #4494, #609 ) ; +#1148 = CARTESIAN_POINT ( 'NONE', ( 2.354218275168249000, -6.640918502064836900, 77.49676248852495100 ) ) ; +#1149 = VECTOR ( 'NONE', #3672, 1000.000000000000100 ) ; +#1150 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, -23.00000000000000400, 0.0000000000000000000 ) ) ; +#1151 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -8.673617379884035500E-017, 1.000000000000000000 ) ) ; +#1152 = VECTOR ( 'NONE', #4322, 1000.000000000000000 ) ; +#1153 = VECTOR ( 'NONE', #3307, 1000.000000000000000 ) ; +#1154 = EDGE_CURVE ( 'NONE', #623, #5363, #3845, .T. ) ; +#1155 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1156 = FACE_OUTER_BOUND ( 'NONE', #3863, .T. ) ; +#1157 = EDGE_CURVE ( 'NONE', #1576, #4704, #4685, .T. ) ; +#1158 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 3.100738598265568000, 3.924477146352861400 ) ) ; +#1159 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -35.00000000000000000, 35.00000000000000000 ) ) ; +#1160 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#1161 = ORIENTED_EDGE ( 'NONE', *, *, #3500, .T. ) ; +#1162 = CARTESIAN_POINT ( 'NONE', ( 0.2522330730247215900, -5.012756852080515000, 76.09432346314795800 ) ) ; +#1163 = VECTOR ( 'NONE', #1281, 1000.000000000000000 ) ; +#1164 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1165 = CARTESIAN_POINT ( 'NONE', ( 34.99470300685513300, 0.5854868474821061100, 75.17717224190083400 ) ) ; +#1166 = LINE ( 'NONE', #646, #3318 ) ; +#1167 = EDGE_CURVE ( 'NONE', #3499, #2827, #1560, .T. ) ; +#1168 = CARTESIAN_POINT ( 'NONE', ( 3.061616997868437900E-016, -7.459310946700275200E-015, 77.50000000000001400 ) ) ; +#1169 = CARTESIAN_POINT ( 'NONE', ( 36.24999999999995000, 5.000000000000026600, 77.50000000000001400 ) ) ; +#1170 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1171 = AXIS2_PLACEMENT_3D ( 'NONE', #967, #3970, #1409 ) ; +#1172 = ORIENTED_EDGE ( 'NONE', *, *, #119, .F. ) ; +#1173 = AXIS2_PLACEMENT_3D ( 'NONE', #2153, #3849, #3887 ) ; +#1174 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 2.822510045038844100, 0.7072819420153019200 ) ) ; +#1175 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000002200, 3.750000000000000400, 77.50000000000001400 ) ) ; +#1176 = CARTESIAN_POINT ( 'NONE', ( 0.0007964381608139901700, 0.8223882918370618600, 75.07222696916164800 ) ) ; +#1177 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -35.00000000000000700, 60.00000000000000000 ) ) ; +#1178 = ORIENTED_EDGE ( 'NONE', *, *, #77, .T. ) ; +#1179 = CC_DESIGN_APPROVAL ( #892, ( #590 ) ) ; +#1180 = ORIENTED_EDGE ( 'NONE', *, *, #711, .F. ) ; +#1181 = CARTESIAN_POINT ( 'NONE', ( 2.168404344971008900E-015, 12.49999999999999800, 40.00000000000000700 ) ) ; +#1182 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1183 = ORIENTED_EDGE ( 'NONE', *, *, #3701, .T. ) ; +#1184 = CARTESIAN_POINT ( 'NONE', ( 0.1651796656624525100, -9.996071295048841100, 76.14100086755209400 ) ) ; +#1185 = ORIENTED_EDGE ( 'NONE', *, *, #77, .F. ) ; +#1186 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.500000000000003600, 67.00000000000001400 ) ) ; +#1187 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -35.00100000000001900, 72.50000000000001400 ) ) ; +#1188 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1189 = VERTEX_POINT ( 'NONE', #4528 ) ; +#1190 = EDGE_CURVE ( 'NONE', #3543, #697, #4845, .T. ) ; +#1191 = EDGE_CURVE ( 'NONE', #376, #1333, #4969, .T. ) ; +#1192 = FACE_OUTER_BOUND ( 'NONE', #4980, .T. ) ; +#1193 = EDGE_LOOP ( 'NONE', ( #515, #5207, #3826, #3151, #3060, #5129 ) ) ; +#1194 = ORIENTED_EDGE ( 'NONE', *, *, #904, .F. ) ; +#1195 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891400E-016, -1.000000000000000000 ) ) ; +#1196 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 0.7940683519436734200, 0.04384324746084034700 ) ) ; +#1197 = ORIENTED_EDGE ( 'NONE', *, *, #5260, .F. ) ; +#1198 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1199 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, -6.591949208711870900E-015, 77.50000000000001400 ) ) ; +#1200 = CIRCLE ( 'NONE', #4590, 1.000000000000000900 ) ; +#1201 = ADVANCED_FACE ( 'NONE', ( #417, #2581 ), #4130, .F. ) ; +#1202 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1203 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 13.49325276995393700, 22.42417230727136300 ) ) ; +#1204 = EDGE_LOOP ( 'NONE', ( #4429, #219, #4626, #96 ) ) ; +#1205 = CYLINDRICAL_SURFACE ( 'NONE', #4794, 5.050799999999994400 ) ; +#1206 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1207 = ORIENTED_EDGE ( 'NONE', *, *, #3200, .T. ) ; +#1208 = ORIENTED_EDGE ( 'NONE', *, *, #4518, .T. ) ; +#1209 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412800E-015, 9.911592120902360700, 17.82950658850821700 ) ) ; +#1210 = FACE_OUTER_BOUND ( 'NONE', #4534, .T. ) ; +#1211 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.50000000000000400, 41.29999999999999700 ) ) ; +#1212 = VERTEX_POINT ( 'NONE', #4072 ) ; +#1213 = AXIS2_PLACEMENT_3D ( 'NONE', #1177, #1160, #1136 ) ; +#1214 = AXIS2_PLACEMENT_3D ( 'NONE', #2006, #4985, #2445 ) ; +#1215 = FACE_OUTER_BOUND ( 'NONE', #3512, .T. ) ; +#1216 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -1.387778780781445700E-014, 77.50000000000001400 ) ) ; +#1217 = CYLINDRICAL_SURFACE ( 'NONE', #1435, 0.5000000000000004400 ) ; +#1218 = AXIS2_PLACEMENT_3D ( 'NONE', #4544, #1972, #4962 ) ; +#1219 = FACE_OUTER_BOUND ( 'NONE', #2666, .T. ) ; +#1220 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1221 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000700, 9.304429095441111700, 8.596584557450523100 ) ) ; +#1222 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 11.85275822269523800, 15.46147845254552600 ) ) ; +#1223 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1224 = CIRCLE ( 'NONE', #1639, 1.199999999999999700 ) ; +#1225 = EDGE_CURVE ( 'NONE', #1212, #2869, #1431, .T. ) ; +#1226 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -8.750000000000012400, 80.00000000000001400 ) ) ; +#1227 = ADVANCED_FACE ( 'NONE', ( #4722 ), #2316, .F. ) ; +#1228 = ORIENTED_EDGE ( 'NONE', *, *, #3935, .T. ) ; +#1229 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 3.280839245784703500, 4.099485096232609900 ) ) ; +#1230 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#1231 = CARTESIAN_POINT ( 'NONE', ( 33.39999999999999100, -24.99999999999997900, 68.75000000000001400 ) ) ; +#1232 = CIRCLE ( 'NONE', #2839, 3.189999999999998600 ) ; +#1233 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.673617379884035500E-017, -1.000000000000000000 ) ) ; +#1234 = EDGE_CURVE ( 'NONE', #5453, #4291, #3581, .T. ) ; +#1235 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 14.99999999999999600, 40.00000000000001400 ) ) ; +#1236 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1237 = FACE_OUTER_BOUND ( 'NONE', #3914, .T. ) ; +#1238 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000001400, 3.187960991280113000, 0.8964964765042936500 ) ) ; +#1239 = CARTESIAN_POINT ( 'NONE', ( 13.00000000000000200, -35.00000000000000700, 55.00000000000000700 ) ) ; +#1240 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1241 = FACE_OUTER_BOUND ( 'NONE', #3406, .T. ) ; +#1242 = AXIS2_PLACEMENT_3D ( 'NONE', #3751, #3712, #3670 ) ; +#1243 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.734723475976807100E-016, 0.0000000000000000000 ) ) ; +#1244 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1245 = EDGE_LOOP ( 'NONE', ( #5009, #2947, #1257 ) ) ; +#1246 = CARTESIAN_POINT ( 'NONE', ( 33.39999999999999100, -24.99999999999997900, 68.75000000000001400 ) ) ; +#1247 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#1248 = AXIS2_PLACEMENT_3D ( 'NONE', #3101, #525, #3538 ) ; +#1249 = ORIENTED_EDGE ( 'NONE', *, *, #5166, .F. ) ; +#1250 = ORIENTED_EDGE ( 'NONE', *, *, #1578, .F. ) ; +#1251 = EDGE_LOOP ( 'NONE', ( #1533, #5323, #313, #700 ) ) ; +#1252 = ORIENTED_EDGE ( 'NONE', *, *, #5225, .F. ) ; +#1253 = CARTESIAN_POINT ( 'NONE', ( -0.0004549392513707099600, -5.943734989946425400, 75.02834858604768400 ) ) ; +#1254 = AXIS2_PLACEMENT_3D ( 'NONE', #3860, #1302, #3439 ) ; +#1255 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 1.249999999999992500, 75.00000000000001400 ) ) ; +#1256 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 6.736790197968178700E-017, 1.000000000000000000 ) ) ; +#1257 = ORIENTED_EDGE ( 'NONE', *, *, #4063, .T. ) ; +#1258 = ADVANCED_FACE ( 'NONE', ( #2712 ), #4583, .F. ) ; +#1259 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999998600, -18.74999999999998200, 76.25000000000001400 ) ) ; +#1260 = CIRCLE ( 'NONE', #4841, 1.250000000000001100 ) ; +#1261 = ORIENTED_EDGE ( 'NONE', *, *, #3097, .T. ) ; +#1262 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1263 = ORIENTED_EDGE ( 'NONE', *, *, #4267, .T. ) ; +#1264 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999997900, -15.00000000000000900, 77.50000000000001400 ) ) ; +#1265 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.449200000000006500, 15.49999999999998400 ) ) ; +#1266 = ORIENTED_EDGE ( 'NONE', *, *, #1952, .F. ) ; +#1267 = EDGE_LOOP ( 'NONE', ( #926, #163, #1787, #4796 ) ) ; +#1268 = VECTOR ( 'NONE', #4938, 1000.000000000000000 ) ; +#1269 = EDGE_LOOP ( 'NONE', ( #2603, #849, #1062, #2431 ) ) ; +#1270 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999994300, -4.999999999999982200, 75.00000000000001400 ) ) ; +#1271 = ORIENTED_EDGE ( 'NONE', *, *, #3138, .T. ) ; +#1272 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1273 = EDGE_CURVE ( 'NONE', #563, #647, #1300, .T. ) ; +#1274 = ORIENTED_EDGE ( 'NONE', *, *, #873, .F. ) ; +#1275 = EDGE_CURVE ( 'NONE', #2325, #2375, #2442, .T. ) ; +#1276 = ORIENTED_EDGE ( 'NONE', *, *, #2174, .T. ) ; +#1277 = VECTOR ( 'NONE', #1885, 1000.000000000000000 ) ; +#1278 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 2.775557561562891400E-016 ) ) ; +#1279 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.0000000000000000000, -1.301042606982605300E-015 ) ) ; +#1280 = CARTESIAN_POINT ( 'NONE', ( 33.58006077507526000, -9.563665775314696300, 77.25998063544324200 ) ) ; +#1281 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -8.673617379884035500E-017, 1.000000000000000000 ) ) ; +#1282 = ORIENTED_EDGE ( 'NONE', *, *, #1872, .T. ) ; +#1283 = ORIENTED_EDGE ( 'NONE', *, *, #2674, .F. ) ; +#1284 = VECTOR ( 'NONE', #600, 1000.000000000000000 ) ; +#1285 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 8.673617379884034200E-017 ) ) ; +#1286 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1287 = EDGE_CURVE ( 'NONE', #4361, #1576, #276, .T. ) ; +#1288 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.999999999999994700, 69.95000000000003100 ) ) ; +#1289 = CIRCLE ( 'NONE', #3969, 5.050799999999994400 ) ; +#1290 = AXIS2_PLACEMENT_3D ( 'NONE', #805, #3807, #1240 ) ; +#1291 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000003600, 7.981908995440285500, 6.101593459074187800 ) ) ; +#1292 = ADVANCED_FACE ( 'NONE', ( #3447 ), #4451, .F. ) ; +#1293 = LINE ( 'NONE', #1611, #3295 ) ; +#1294 = AXIS2_PLACEMENT_3D ( 'NONE', #1558, #3692, #5362 ) ; +#1295 = AXIS2_PLACEMENT_3D ( 'NONE', #2438, #5390, #2866 ) ; +#1296 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, 18.28184403566698200, 61.20000000000001000 ) ) ; +#1297 = VECTOR ( 'NONE', #3398, 1000.000000000000000 ) ; +#1298 = LINE ( 'NONE', #1150, #1018 ) ; +#1299 = CARTESIAN_POINT ( 'NONE', ( -1.250000000000002400, 5.000000000000000900, 77.50000000000001400 ) ) ; +#1300 = CIRCLE ( 'NONE', #4736, 1.250000000000000000 ) ; +#1301 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1302 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1303 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -32.40000000000000600, 36.20000000000000300 ) ) ; +#1304 = CARTESIAN_POINT ( 'NONE', ( 2.602374448187987800E-015, -18.75000000000000700, 77.50000000000001400 ) ) ; +#1305 = ORIENTED_EDGE ( 'NONE', *, *, #2685, .F. ) ; +#1306 = EDGE_CURVE ( 'NONE', #2738, #2258, #16, .T. ) ; +#1307 = CIRCLE ( 'NONE', #613, 5.050799999999998000 ) ; +#1308 = EDGE_CURVE ( 'NONE', #4948, #112, #2306, .T. ) ; +#1309 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000003100, 14.80228447588781500, 32.43769096670423800 ) ) ; +#1310 = VECTOR ( 'NONE', #1320, 1000.000000000000000 ) ; +#1311 = EDGE_CURVE ( 'NONE', #4792, #3223, #3306, .T. ) ; +#1312 = CARTESIAN_POINT ( 'NONE', ( 32.78854746928313100, -6.321043050755219100, 77.48431997868466700 ) ) ; +#1313 = ADVANCED_FACE ( 'NONE', ( #1156 ), #1022, .T. ) ; +#1314 = EDGE_LOOP ( 'NONE', ( #4419, #4802, #1916, #3190, #5126, #3130 ) ) ; +#1315 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 9.757819552369543900E-016, 0.0000000000000000000 ) ) ; +#1316 = CARTESIAN_POINT ( 'NONE', ( 1.377727649040711600E-015, -8.750000000000012400, 77.50000000000001400 ) ) ; +#1317 = CARTESIAN_POINT ( 'NONE', ( 0.2069725790650872600, -15.02607153187714000, 75.99969930912685400 ) ) ; +#1318 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1319 = EDGE_LOOP ( 'NONE', ( #3401, #4633, #5167, #4939 ) ) ; +#1320 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1321 = ORIENTED_EDGE ( 'NONE', *, *, #3935, .F. ) ; +#1322 = AXIS2_PLACEMENT_3D ( 'NONE', #3049, #3042, #3030 ) ; +#1323 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -35.00000000000000700, 60.00000000000000000 ) ) ; +#1324 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 15.00000000000000500, 16.56854249492388200 ) ) ; +#1325 = ORIENTED_EDGE ( 'NONE', *, *, #1580, .T. ) ; +#1326 = ORIENTED_EDGE ( 'NONE', *, *, #2544, .F. ) ; +#1327 = ORIENTED_EDGE ( 'NONE', *, *, #3366, .F. ) ; +#1328 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.734723475976806600E-016, 0.0000000000000000000 ) ) ; +#1329 = AXIS2_PLACEMENT_3D ( 'NONE', #5013, #4643, #2070 ) ; +#1330 = ORIENTED_EDGE ( 'NONE', *, *, #1481, .F. ) ; +#1331 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1332 = FACE_OUTER_BOUND ( 'NONE', #1267, .T. ) ; +#1333 = VERTEX_POINT ( 'NONE', #5104 ) ; +#1334 = ORIENTED_EDGE ( 'NONE', *, *, #1112, .F. ) ; +#1335 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 15.00000000000000000, 40.00000000000001400 ) ) ; +#1336 = CARTESIAN_POINT ( 'NONE', ( 0.02838215973449414700, 12.89453843651309800, 70.13806036896970400 ) ) ; +#1337 = ORIENTED_EDGE ( 'NONE', *, *, #5489, .F. ) ; +#1338 = CIRCLE ( 'NONE', #4868, 1.199999999999999700 ) ; +#1339 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1340 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1341 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, -7.025630077706072700E-015, 77.50000000000001400 ) ) ; +#1342 = ORIENTED_EDGE ( 'NONE', *, *, #2576, .T. ) ; +#1343 = ADVANCED_FACE ( 'NONE', ( #5415 ), #889, .F. ) ; +#1344 = FACE_OUTER_BOUND ( 'NONE', #558, .T. ) ; +#1345 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 14.99999999999999300, 40.00000000000001400 ) ) ; +#1346 = EDGE_CURVE ( 'NONE', #3460, #4849, #2033, .T. ) ; +#1347 = EDGE_CURVE ( 'NONE', #1515, #4698, #4320, .T. ) ; +#1348 = VERTEX_POINT ( 'NONE', #1746 ) ; +#1349 = FACE_OUTER_BOUND ( 'NONE', #5393, .T. ) ; +#1350 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1351 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -2.449199999999998500, 79.99999999999997200 ) ) ; +#1352 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1353 = LINE ( 'NONE', #5135, #3504 ) ; +#1354 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1355 = EDGE_CURVE ( 'NONE', #987, #4009, #4183, .T. ) ; +#1356 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1357 = CARTESIAN_POINT ( 'NONE', ( 33.39999999999994200, 10.00000000000002000, 68.75000000000001400 ) ) ; +#1358 = CIRCLE ( 'NONE', #851, 2.500000000000002200 ) ; +#1359 = AXIS2_PLACEMENT_3D ( 'NONE', #1582, #4607, #2040 ) ; +#1360 = CIRCLE ( 'NONE', #2195, 2.499999999999988500 ) ; +#1361 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1362 = CARTESIAN_POINT ( 'NONE', ( -4.538343641556160500E-014, 2.535678985883153700, 0.5658854809521062200 ) ) ; +#1363 = LINE ( 'NONE', #4090, #3635 ) ; +#1364 = AXIS2_PLACEMENT_3D ( 'NONE', #603, #3185, #172 ) ; +#1365 = EDGE_LOOP ( 'NONE', ( #1950, #2180, #4349, #2274 ) ) ; +#1366 = VERTEX_POINT ( 'NONE', #5159 ) ; +#1367 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -30.00000000000001100, 80.00000000000000000 ) ) ; +#1368 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000007800, -7.500000000000009800, 78.75000000000001400 ) ) ; +#1369 = FACE_OUTER_BOUND ( 'NONE', #1504, .T. ) ; +#1370 = ADVANCED_FACE ( 'NONE', ( #2179 ), #918, .F. ) ; +#1371 = PLANE ( 'NONE', #2477 ) ; +#1372 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1373 = CIRCLE ( 'NONE', #5143, 2.500000000000002200 ) ; +#1374 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.734723475976806800E-016, -4.814824860968089100E-032 ) ) ; +#1375 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.50000000000000400, 6.299999999999995400 ) ) ; +#1376 = EDGE_CURVE ( 'NONE', #3146, #469, #744, .T. ) ; +#1377 = EDGE_CURVE ( 'NONE', #2869, #635, #1894, .T. ) ; +#1378 = ORIENTED_EDGE ( 'NONE', *, *, #672, .T. ) ; +#1379 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1380 = ORIENTED_EDGE ( 'NONE', *, *, #2210, .T. ) ; +#1381 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -2.220446049250313400E-014, 80.00000000000001400 ) ) ; +#1382 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1383 = ORIENTED_EDGE ( 'NONE', *, *, #1420, .F. ) ; +#1384 = EDGE_LOOP ( 'NONE', ( #4131, #5459, #2884, #5419 ) ) ; +#1385 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1386 = VERTEX_POINT ( 'NONE', #4380 ) ; +#1387 = ORIENTED_EDGE ( 'NONE', *, *, #684, .F. ) ; +#1388 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.999999999999994700, 68.75000000000001400 ) ) ; +#1389 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1390 = VERTEX_POINT ( 'NONE', #1777 ) ; +#1391 = LINE ( 'NONE', #2776, #1523 ) ; +#1392 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000700, 2.244453765511082100, 3.265706357600188300 ) ) ; +#1393 = ADVANCED_FACE ( 'NONE', ( #5286, #1760 ), #2224, .F. ) ; +#1394 = EDGE_LOOP ( 'NONE', ( #1918, #5336, #451, #2330, #3808, #2164 ) ) ; +#1395 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -118.8152730712011000, 79.99999999999998600 ) ) ; +#1396 = AXIS2_PLACEMENT_3D ( 'NONE', #1368, #5205, #506 ) ; +#1397 = ORIENTED_EDGE ( 'NONE', *, *, #3709, .T. ) ; +#1398 = ORIENTED_EDGE ( 'NONE', *, *, #1623, .F. ) ; +#1399 = LINE ( 'NONE', #1955, #1268 ) ; +#1400 = EDGE_LOOP ( 'NONE', ( #2611, #1674, #1698 ) ) ; +#1401 = ORIENTED_EDGE ( 'NONE', *, *, #3536, .T. ) ; +#1402 = CARTESIAN_POINT ( 'NONE', ( 1.530808498934341900E-016, 1.249999999999992700, 77.50000000000001400 ) ) ; +#1403 = CARTESIAN_POINT ( 'NONE', ( 2.408884835996056900, -8.191167028061931500, 77.49860324879846000 ) ) ; +#1404 = ORIENTED_EDGE ( 'NONE', *, *, #654, .T. ) ; +#1405 = EDGE_LOOP ( 'NONE', ( #1994, #644, #5255, #2124 ) ) ; +#1406 = TOROIDAL_SURFACE ( 'NONE', #3834, 1.250000000000002200, 1.250000000000000000 ) ; +#1407 = EDGE_CURVE ( 'NONE', #2422, #2332, #5165, .T. ) ; +#1408 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#1409 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1410 = EDGE_CURVE ( 'NONE', #4484, #2358, #5029, .T. ) ; +#1411 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884037900E-017 ) ) ; +#1412 = VERTEX_POINT ( 'NONE', #86 ) ; +#1413 = VERTEX_POINT ( 'NONE', #2678 ) ; +#1414 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -35.00000000000000000, -3.035766082959412800E-015 ) ) ; +#1415 = LINE ( 'NONE', #4043, #3685 ) ; +#1416 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 10.70202200343146800, 21.15779857125412300 ) ) ; +#1417 = CARTESIAN_POINT ( 'NONE', ( 2.602374448187987800E-015, -18.75000000000000700, 77.50000000000001400 ) ) ; +#1418 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 3.280839245046034400, 4.099485096909837100 ) ) ; +#1419 = FACE_OUTER_BOUND ( 'NONE', #5443, .T. ) ; +#1420 = EDGE_CURVE ( 'NONE', #1474, #4253, #481, .T. ) ; +#1421 = CIRCLE ( 'NONE', #930, 1.200000000000006600 ) ; +#1422 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1423 = ADVANCED_FACE ( 'NONE', ( #1622 ), #3110, .F. ) ; +#1424 = VECTOR ( 'NONE', #5418, 1000.000000000000000 ) ; +#1425 = VECTOR ( 'NONE', #650, 1000.000000000000000 ) ; +#1426 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.734723475976806800E-016, -0.0000000000000000000 ) ) ; +#1427 = AXIS2_PLACEMENT_3D ( 'NONE', #4793, #4786, #4778 ) ; +#1428 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1429 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1430 = AXIS2_PLACEMENT_3D ( 'NONE', #2832, #4965, #2418 ) ; +#1431 = CIRCLE ( 'NONE', #3015, 0.5000000000000004400 ) ; +#1432 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999993600, 1.682681771697491200E-014, 75.00000000000001400 ) ) ; +#1433 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 3.387832467080268200, 1.026231026533682300 ) ) ; +#1434 = ORIENTED_EDGE ( 'NONE', *, *, #2241, .T. ) ; +#1435 = AXIS2_PLACEMENT_3D ( 'NONE', #198, #1105, #2791 ) ; +#1436 = FACE_OUTER_BOUND ( 'NONE', #2802, .T. ) ; +#1437 = PLANE ( 'NONE', #2594 ) ; +#1438 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -14.99100622546988300, 16.15537812313072400 ) ) ; +#1439 = FACE_OUTER_BOUND ( 'NONE', #1727, .T. ) ; +#1440 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.500000000000003600, 67.00000000000001400 ) ) ; +#1441 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -30.00000000000001100, 72.50000000000001400 ) ) ; +#1442 = PLANE ( 'NONE', #2803 ) ; +#1443 = ORIENTED_EDGE ( 'NONE', *, *, #577, .F. ) ; +#1444 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, -25.00000000000000000, 68.75000000000001400 ) ) ; +#1445 = EDGE_CURVE ( 'NONE', #2139, #4225, #3772, .T. ) ; +#1446 = EDGE_CURVE ( 'NONE', #843, #656, #3913, .T. ) ; +#1447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1448 = ADVANCED_FACE ( 'NONE', ( #605, #2777, #2651 ), #516, .T. ) ; +#1449 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 5.925226868529908800, 3.240617392133150300 ) ) ; +#1450 = EDGE_LOOP ( 'NONE', ( #3958, #4658, #1850, #456 ) ) ; +#1451 = ORIENTED_EDGE ( 'NONE', *, *, #2830, .F. ) ; +#1452 = CARTESIAN_POINT ( 'NONE', ( 8.116379947534301200E-015, 5.000000000000001800, 76.25000000000001400 ) ) ; +#1453 = ORIENTED_EDGE ( 'NONE', *, *, #4647, .T. ) ; +#1454 = PLANE ( 'NONE', #4276 ) ; +#1455 = FACE_BOUND ( 'NONE', #1123, .T. ) ; +#1456 = ORIENTED_EDGE ( 'NONE', *, *, #3735, .T. ) ; +#1457 = EDGE_CURVE ( 'NONE', #3124, #2652, #341, .T. ) ; +#1458 = ORIENTED_EDGE ( 'NONE', *, *, #4436, .F. ) ; +#1459 = AXIS2_PLACEMENT_3D ( 'NONE', #1388, #2252, #3075 ) ; +#1460 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1461 = FACE_OUTER_BOUND ( 'NONE', #2396, .T. ) ; +#1462 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -10.00000000000001100, 76.25000000000001400 ) ) ; +#1463 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1464 = ORIENTED_EDGE ( 'NONE', *, *, #3962, .F. ) ; +#1465 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.50000000000000400, 7.499999999999996400 ) ) ; +#1466 = ORIENTED_EDGE ( 'NONE', *, *, #2739, .T. ) ; +#1467 = AXIS2_PLACEMENT_3D ( 'NONE', #470, #3047, #3473 ) ; +#1468 = ORIENTED_EDGE ( 'NONE', *, *, #3645, .T. ) ; +#1469 = FACE_BOUND ( 'NONE', #2262, .T. ) ; +#1470 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 7.706902047026987100, 5.674581453988003500 ) ) ; +#1471 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #774, #374, ( #590 ) ) ; +#1472 = ORIENTED_EDGE ( 'NONE', *, *, #1346, .T. ) ; +#1473 = ORIENTED_EDGE ( 'NONE', *, *, #2741, .T. ) ; +#1474 = VERTEX_POINT ( 'NONE', #2709 ) ; +#1475 = ORIENTED_EDGE ( 'NONE', *, *, #2818, .F. ) ; +#1476 = FACE_OUTER_BOUND ( 'NONE', #4825, .T. ) ; +#1477 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -2.775557561562891400E-016 ) ) ; +#1478 = ADVANCED_FACE ( 'NONE', ( #4775 ), #3569, .F. ) ; +#1479 = ORIENTED_EDGE ( 'NONE', *, *, #3861, .F. ) ; +#1480 = CIRCLE ( 'NONE', #3864, 2.500000000000000000 ) ; +#1481 = EDGE_CURVE ( 'NONE', #3256, #635, #1363, .T. ) ; +#1482 = EDGE_CURVE ( 'NONE', #5191, #2129, #201, .T. ) ; +#1483 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1484 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1485 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -13.55080000000001000, 22.10328947826994300 ) ) ; +#1486 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 10.71934895896707800, 11.99236429979469200 ) ) ; +#1487 = VECTOR ( 'NONE', #1545, 1000.000000000000000 ) ; +#1488 = VECTOR ( 'NONE', #2549, 1000.000000000000000 ) ; +#1489 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#1490 = VECTOR ( 'NONE', #3972, 1000.000000000000000 ) ; +#1491 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1492 = EDGE_LOOP ( 'NONE', ( #3395, #3604 ) ) ; +#1493 = CARTESIAN_POINT ( 'NONE', ( 34.88124958452049600, -15.09630293977776300, 75.76591990394158000 ) ) ; +#1494 = FACE_BOUND ( 'NONE', #2627, .T. ) ; +#1495 = AXIS2_PLACEMENT_3D ( 'NONE', #1056, #1042, #1039 ) ; +#1496 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, -25.00000000000000000, 68.75000000000001400 ) ) ; +#1497 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1498 = AXIS2_PLACEMENT_3D ( 'NONE', #4561, #3688, #4971 ) ; +#1499 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1500 = ADVANCED_FACE ( 'NONE', ( #2508 ), #76, .F. ) ; +#1501 = CIRCLE ( 'NONE', #151, 1.000000000000000900 ) ; +#1502 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -30.00000000000000700, 35.00000000000000000 ) ) ; +#1503 = AXIS2_PLACEMENT_3D ( 'NONE', #2788, #2771, #195 ) ; +#1504 = EDGE_LOOP ( 'NONE', ( #3139, #1208, #920, #2470 ) ) ; +#1505 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1506 = EDGE_CURVE ( 'NONE', #300, #4664, #3508, .T. ) ; +#1507 = ORIENTED_EDGE ( 'NONE', *, *, #4893, .T. ) ; +#1508 = ORIENTED_EDGE ( 'NONE', *, *, #1157, .F. ) ; +#1509 = ORIENTED_EDGE ( 'NONE', *, *, #5019, .F. ) ; +#1510 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1511 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1512 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.224646799147276800E-016, 0.0000000000000000000 ) ) ; +#1513 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4703, #3832, #3402, #2132, #5108, #2571, #5514, #2989, #415, #3424, #845, #3852, #1291, #4292, #1711, #4718, #2155, #5125, #2589, #5, #3012, #433, #3445, #868, #3866, #1309, #4310, #1730 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 1.268229207689397100E-032, 0.001425338023083102000, 0.002850676046166204000, 0.004276014069249306700, 0.005701352092332407200, 0.008552028138498608100, 0.01140270418466480900, 0.01425338023083101000, 0.01710405627699721300, 0.01995473232316341500, 0.02280540836932962200, 0.02850676046166203100, 0.03420811255399443900, 0.04561081673865925700 ), + .UNSPECIFIED. ) ; +#1514 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -25.50000000000000400, 24.99999999999999600 ) ) ; +#1515 = VERTEX_POINT ( 'NONE', #2386 ) ; +#1516 = EDGE_CURVE ( 'NONE', #1412, #5000, #4515, .T. ) ; +#1517 = PERSON_AND_ORGANIZATION ( #5121, #5438 ) ; +#1518 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1519 = VERTEX_POINT ( 'NONE', #209 ) ; +#1520 = CARTESIAN_POINT ( 'NONE', ( 37.50099999999998300, -25.50000000000000400, 6.299999999999995400 ) ) ; +#1521 = DIRECTION ( 'NONE', ( 1.224646799147276800E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1522 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -24.99999999999997900, 65.56000000000001600 ) ) ; +#1523 = VECTOR ( 'NONE', #183, 1000.000000000000000 ) ; +#1524 = ORIENTED_EDGE ( 'NONE', *, *, #105, .T. ) ; +#1525 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -32.40000000000000600, 35.00000000000000000 ) ) ; +#1526 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1527 = ORIENTED_EDGE ( 'NONE', *, *, #3777, .F. ) ; +#1528 = ORIENTED_EDGE ( 'NONE', *, *, #2208, .T. ) ; +#1529 = AXIS2_PLACEMENT_3D ( 'NONE', #3343, #3323, #3261 ) ; +#1530 = CIRCLE ( 'NONE', #3330, 1.199999999999999700 ) ; +#1531 = VERTEX_POINT ( 'NONE', #3634 ) ; +#1532 = AXIS2_PLACEMENT_3D ( 'NONE', #1402, #4406, #1824 ) ; +#1533 = ORIENTED_EDGE ( 'NONE', *, *, #4649, .T. ) ; +#1534 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -35.00000000000000700, 72.00000000000001400 ) ) ; +#1535 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 14.05566315091470900, 25.90204328052196600 ) ) ; +#1536 = VERTEX_POINT ( 'NONE', #4940 ) ; +#1537 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1538 = LINE ( 'NONE', #555, #1669 ) ; +#1539 = AXIS2_PLACEMENT_3D ( 'NONE', #1761, #3026, #4760 ) ; +#1540 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999994300, 10.00000000000002000, 68.75000000000001400 ) ) ; +#1541 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#1542 = ORIENTED_EDGE ( 'NONE', *, *, #2851, .T. ) ; +#1543 = ORIENTED_EDGE ( 'NONE', *, *, #5291, .T. ) ; +#1544 = LINE ( 'NONE', #5289, #3960 ) ; +#1545 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1546 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1547 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1548 = CYLINDRICAL_SURFACE ( 'NONE', #3400, 1.200000000000006600 ) ; +#1549 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1550 = EDGE_CURVE ( 'NONE', #4302, #1055, #4651, .T. ) ; +#1551 = CYLINDRICAL_SURFACE ( 'NONE', #622, 1.250000000000000000 ) ; +#1552 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -32.40000000000000600, 35.00000000000000000 ) ) ; +#1553 = EDGE_CURVE ( 'NONE', #97, #3942, #3373, .T. ) ; +#1554 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 8.378956808097639100, 12.80878282066184700 ) ) ; +#1555 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1556 = FACE_OUTER_BOUND ( 'NONE', #1867, .T. ) ; +#1557 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1558 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 12.49999999999999300, 80.00000000000001400 ) ) ; +#1559 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1560 = CIRCLE ( 'NONE', #2160, 3.189999999999998600 ) ; +#1561 = EDGE_CURVE ( 'NONE', #4225, #1983, #2236, .T. ) ; +#1562 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 14.99999999999999300, 80.00000000000001400 ) ) ; +#1563 = ORIENTED_EDGE ( 'NONE', *, *, #3984, .F. ) ; +#1564 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1565 = AXIS2_PLACEMENT_3D ( 'NONE', #1630, #3786, #1223 ) ; +#1566 = LINE ( 'NONE', #2296, #544 ) ; +#1567 = CARTESIAN_POINT ( 'NONE', ( 34.91912211602931400, -10.00000000000000000, 76.19307411320417600 ) ) ; +#1568 = AXIS2_PLACEMENT_3D ( 'NONE', #231, #3250, #2390 ) ; +#1569 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 7.430056260894252400, 5.216945116699367400 ) ) ; +#1570 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1571 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1572 = FACE_OUTER_BOUND ( 'NONE', #571, .T. ) ; +#1573 = CARTESIAN_POINT ( 'NONE', ( 2.125536784848015300, -6.172436098558424800, 77.47399239786587100 ) ) ; +#1574 = DIRECTION ( 'NONE', ( 1.224646799147276800E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1575 = EDGE_LOOP ( 'NONE', ( #64, #1387 ) ) ; +#1576 = VERTEX_POINT ( 'NONE', #2767 ) ; +#1577 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1578 = EDGE_CURVE ( 'NONE', #1519, #697, #1224, .T. ) ; +#1579 = ORIENTED_EDGE ( 'NONE', *, *, #935, .T. ) ; +#1580 = EDGE_CURVE ( 'NONE', #3671, #4009, #1089, .T. ) ; +#1581 = ORIENTED_EDGE ( 'NONE', *, *, #5490, .T. ) ; +#1582 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, 18.28184403566698200, 60.00000000000000700 ) ) ; +#1583 = FACE_BOUND ( 'NONE', #3021, .T. ) ; +#1584 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 4.771423248990331900, 2.061636436882169100 ) ) ; +#1585 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1586 = ORIENTED_EDGE ( 'NONE', *, *, #3181, .F. ) ; +#1587 = CARTESIAN_POINT ( 'NONE', ( 0.2034409002045635700, 0.01688035891699662300, 76.00187216413981200 ) ) ; +#1588 = ORIENTED_EDGE ( 'NONE', *, *, #3355, .F. ) ; +#1589 = EDGE_CURVE ( 'NONE', #4411, #2343, #4389, .T. ) ; +#1590 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000007800, -7.500000000000009800, 77.50000000000001400 ) ) ; +#1591 = LINE ( 'NONE', #5417, #450 ) ; +#1592 = ORIENTED_EDGE ( 'NONE', *, *, #3076, .T. ) ; +#1593 = CARTESIAN_POINT ( 'NONE', ( 34.94544317807515200, 0.2108886035683793000, 75.53508473369392100 ) ) ; +#1594 = VERTEX_POINT ( 'NONE', #3167 ) ; +#1595 = ORIENTED_EDGE ( 'NONE', *, *, #173, .T. ) ; +#1596 = VECTOR ( 'NONE', #4158, 1000.000000000000000 ) ; +#1597 = VERTEX_POINT ( 'NONE', #584 ) ; +#1598 = CARTESIAN_POINT ( 'NONE', ( 0.05737213031698943500, -9.795692437852618900, 75.55001294024465600 ) ) ; +#1599 = EDGE_LOOP ( 'NONE', ( #1197, #4519, #3755, #5258 ) ) ; +#1600 = AXIS2_PLACEMENT_3D ( 'NONE', #3208, #3121, #3111 ) ; +#1601 = EDGE_LOOP ( 'NONE', ( #4207, #116, #1602 ) ) ; +#1602 = ORIENTED_EDGE ( 'NONE', *, *, #3679, .F. ) ; +#1603 = CYLINDRICAL_SURFACE ( 'NONE', #2513, 5.050799999999998000 ) ; +#1604 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #3776, 'distance_accuracy_value', 'NONE'); +#1605 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 1.483716554587758000, 2.837673295077982200 ) ) ; +#1606 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1607 = VERTEX_POINT ( 'NONE', #153 ) ; +#1608 = CIRCLE ( 'NONE', #2154, 1.250000000000001100 ) ; +#1609 = VERTEX_POINT ( 'NONE', #2746 ) ; +#1610 = AXIS2_PLACEMENT_3D ( 'NONE', #5066, #2524, #5474 ) ; +#1611 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -23.00000000000000400, 0.0000000000000000000 ) ) ; +#1612 = CARTESIAN_POINT ( 'NONE', ( 4.510793999040729300E-012, 14.99999999995791800, 36.45143626804313900 ) ) ; +#1613 = CARTESIAN_POINT ( 'NONE', ( 34.97161784026550900, 12.89453843651310700, 67.36193963103029600 ) ) ; +#1614 = LINE ( 'NONE', #3024, #4505 ) ; +#1615 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -14.99100622546988300, 16.15537812313072400 ) ) ; +#1616 = ADVANCED_FACE ( 'NONE', ( #4252 ), #1442, .F. ) ; +#1617 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#1618 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, -7.806255641895631900E-015, 77.50000000000001400 ) ) ; +#1619 = CIRCLE ( 'NONE', #4974, 1.199999999999992600 ) ; +#1620 = LINE ( 'NONE', #371, #1488 ) ; +#1621 = EDGE_CURVE ( 'NONE', #2955, #2139, #3100, .T. ) ; +#1622 = FACE_OUTER_BOUND ( 'NONE', #785, .T. ) ; +#1623 = EDGE_CURVE ( 'NONE', #4077, #180, #950, .T. ) ; +#1624 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.3968463731239860700, 2.734790980018925900E-009 ) ) ; +#1625 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.449200000000003800, 67.00000000000001400 ) ) ; +#1626 = VERTEX_POINT ( 'NONE', #3152 ) ; +#1627 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1628 = FACE_BOUND ( 'NONE', #4991, .T. ) ; +#1629 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 11.03348328997208600, 22.87382247293335200 ) ) ; +#1630 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -35.00000000000000000, 35.00000000000000000 ) ) ; +#1631 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -118.8152730712011000, 79.99999999999998600 ) ) ; +#1632 = LINE ( 'NONE', #4019, #2789 ) ; +#1633 = EDGE_CURVE ( 'NONE', #4955, #2012, #1964, .T. ) ; +#1634 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -30.00000000000000400, 10.00000000000000500 ) ) ; +#1635 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412000E-015, 9.203064985105548600, 15.32604490382904800 ) ) ; +#1636 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1637 = EDGE_LOOP ( 'NONE', ( #4795, #4788, #1774, #435, #5120, #4930 ) ) ; +#1638 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000002200, 1.249999999999992200, 77.50000000000001400 ) ) ; +#1639 = AXIS2_PLACEMENT_3D ( 'NONE', #1465, #4025, #1030 ) ; +#1640 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1641 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1642 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1643 = ADVANCED_FACE ( 'NONE', ( #3238 ), #5095, .T. ) ; +#1644 = ORIENTED_EDGE ( 'NONE', *, *, #3890, .T. ) ; +#1645 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.387778780781444500E-015, 0.0000000000000000000 ) ) ; +#1646 = ORIENTED_EDGE ( 'NONE', *, *, #4678, .F. ) ; +#1647 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 8.202926922947920500, 6.502970472851674600 ) ) ; +#1648 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 11.59274377305249400, 14.59033084026346200 ) ) ; +#1649 = ORIENTED_EDGE ( 'NONE', *, *, #3709, .F. ) ; +#1650 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#1651 = EDGE_LOOP ( 'NONE', ( #5287, #4888 ) ) ; +#1652 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412800E-015, 2.786094230652391300, 3.665689828320980700 ) ) ; +#1653 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1654 = EDGE_CURVE ( 'NONE', #1881, #987, #4111, .T. ) ; +#1655 = EDGE_CURVE ( 'NONE', #220, #1114, #671, .T. ) ; +#1656 = CIRCLE ( 'NONE', #1102, 1.250000000000001100 ) ; +#1657 = ORIENTED_EDGE ( 'NONE', *, *, #4446, .T. ) ; +#1658 = ORIENTED_EDGE ( 'NONE', *, *, #239, .F. ) ; +#1659 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -35.00000000000000000, 33.80000000000000400 ) ) ; +#1660 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1661 = ORIENTED_EDGE ( 'NONE', *, *, #7, .F. ) ; +#1662 = PLANE ( 'NONE', #4665 ) ; +#1663 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -23.00000000000000400, 1.040834085586084700E-015 ) ) ; +#1664 = CYLINDRICAL_SURFACE ( 'NONE', #2192, 5.050799999999994400 ) ; +#1665 = ORIENTED_EDGE ( 'NONE', *, *, #903, .F. ) ; +#1666 = ORIENTED_EDGE ( 'NONE', *, *, #2090, .T. ) ; +#1667 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000001400, 1.883862628341094900, 0.2975224920561452800 ) ) ; +#1668 = VERTEX_POINT ( 'NONE', #4541 ) ; +#1669 = VECTOR ( 'NONE', #2304, 1000.000000000000000 ) ; +#1670 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1671 = AXIS2_PLACEMENT_3D ( 'NONE', #5292, #2765, #169 ) ; +#1672 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999994300, 5.000000000000024900, 76.25000000000001400 ) ) ; +#1673 = ORIENTED_EDGE ( 'NONE', *, *, #2345, .F. ) ; +#1674 = ORIENTED_EDGE ( 'NONE', *, *, #2923, .F. ) ; +#1675 = ADVANCED_FACE ( 'NONE', ( #2844 ), #4966, .T. ) ; +#1676 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000700, 15.00000000000000200, 36.20768872729561100 ) ) ; +#1677 = VECTOR ( 'NONE', #4000, 1000.000000000000000 ) ; +#1678 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1679 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#1680 = AXIS2_PLACEMENT_3D ( 'NONE', #5149, #23, #452 ) ; +#1681 = AXIS2_PLACEMENT_3D ( 'NONE', #1866, #4860, #2305 ) ; +#1682 = CYLINDRICAL_SURFACE ( 'NONE', #2836, 5.050799999999998000 ) ; +#1683 = CARTESIAN_POINT ( 'NONE', ( 0.007625408014006202600, -5.524192838506181100, 75.22087482596330700 ) ) ; +#1684 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -7.500000000000003600, 72.05080000000001000 ) ) ; +#1685 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1686 = FACE_OUTER_BOUND ( 'NONE', #5186, .T. ) ; +#1687 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1688 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1689 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -30.00000000000000700, 35.00000000000000000 ) ) ; +#1690 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1691 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1692 = CARTESIAN_POINT ( 'NONE', ( 9.184850993604820600E-016, -5.000000000000006200, 77.50000000000001400 ) ) ; +#1693 = FACE_OUTER_BOUND ( 'NONE', #2103, .T. ) ; +#1694 = EDGE_CURVE ( 'NONE', #2616, #3426, #538, .T. ) ; +#1695 = EDGE_CURVE ( 'NONE', #4973, #4302, #1823, .T. ) ; +#1696 = CARTESIAN_POINT ( 'NONE', ( 9.817770103996568300E-014, 6.576077340625996500, 4.036229363779382200 ) ) ; +#1697 = VECTOR ( 'NONE', #5405, 1000.000000000000000 ) ; +#1698 = ORIENTED_EDGE ( 'NONE', *, *, #399, .F. ) ; +#1699 = EDGE_CURVE ( 'NONE', #776, #2876, #5224, .T. ) ; +#1700 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.059793774530135100, 20.53158018112177500 ) ) ; +#1701 = CARTESIAN_POINT ( 'NONE', ( 33.98535002573576200, -9.789022263536018900, 77.01803210429866900 ) ) ; +#1702 = FACE_OUTER_BOUND ( 'NONE', #4737, .T. ) ; +#1703 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1704 = ADVANCED_FACE ( 'NONE', ( #1693 ), #4842, .F. ) ; +#1705 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1706 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 14.99999999999998600, 80.00000000000001400 ) ) ; +#1707 = CARTESIAN_POINT ( 'NONE', ( -1.764651973446478200E-020, -16.16240417417306200, 75.00000000000001400 ) ) ; +#1708 = VECTOR ( 'NONE', #2189, 1000.000000000000000 ) ; +#1709 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, -7.765472646487094200E-015, 77.50000000000001400 ) ) ; +#1710 = AXIS2_PLACEMENT_3D ( 'NONE', #4497, #4465, #4445 ) ; +#1711 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000003600, 9.305730636776887700, 8.599718216771858400 ) ) ; +#1712 = ORIENTED_EDGE ( 'NONE', *, *, #4893, .F. ) ; +#1713 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1714 = AXIS2_PLACEMENT_3D ( 'NONE', #4979, #2437, #5389 ) ; +#1715 = EDGE_LOOP ( 'NONE', ( #1869, #5266, #688, #875 ) ) ; +#1716 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -7.940206225469880900, 10.46841981887819600 ) ) ; +#1717 = AXIS2_PLACEMENT_3D ( 'NONE', #4118, #1408, #1830 ) ; +#1718 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1719 = ORIENTED_EDGE ( 'NONE', *, *, #792, .T. ) ; +#1720 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -25.00000000000000000, 68.75000000000001400 ) ) ; +#1721 = ORIENTED_EDGE ( 'NONE', *, *, #1306, .F. ) ; +#1722 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.673617379884035500E-017, -1.000000000000000000 ) ) ; +#1723 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#1724 = CYLINDRICAL_SURFACE ( 'NONE', #2730, 1.199999999999999700 ) ; +#1725 = VERTEX_POINT ( 'NONE', #3284 ) ; +#1726 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -16.25000000000000700, 80.00000000000001400 ) ) ; +#1727 = EDGE_LOOP ( 'NONE', ( #3495, #3987, #4627, #4428, #3931, #1451, #3408, #4872, #3883, #4913, #836 ) ) ; +#1728 = CIRCLE ( 'NONE', #3229, 1.250000000000001100 ) ; +#1729 = VERTEX_POINT ( 'NONE', #5400 ) ; +#1730 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 14.99999999999999600, 40.00000000000001400 ) ) ; +#1731 = ADVANCED_FACE ( 'NONE', ( #1556 ), #2575, .F. ) ; +#1732 = ORIENTED_EDGE ( 'NONE', *, *, #4688, .F. ) ; +#1733 = EDGE_CURVE ( 'NONE', #2358, #5506, #3697, .T. ) ; +#1734 = ORIENTED_EDGE ( 'NONE', *, *, #2498, .T. ) ; +#1735 = EDGE_CURVE ( 'NONE', #369, #97, #339, .T. ) ; +#1736 = ORIENTED_EDGE ( 'NONE', *, *, #2034, .F. ) ; +#1737 = CIRCLE ( 'NONE', #1141, 1.200000000000006600 ) ; +#1738 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1739 = CARTESIAN_POINT ( 'NONE', ( 32.59111516400395200, -6.808832971938061400, 77.49860324879846000 ) ) ; +#1740 = ORIENTED_EDGE ( 'NONE', *, *, #4231, .T. ) ; +#1741 = ORIENTED_EDGE ( 'NONE', *, *, #4366, .T. ) ; +#1742 = FACE_OUTER_BOUND ( 'NONE', #2531, .T. ) ; +#1743 = CARTESIAN_POINT ( 'NONE', ( 0.3222427829174863100, -15.00000000000000900, 76.23085474022754200 ) ) ; +#1744 = EDGE_CURVE ( 'NONE', #3141, #2943, #3838, .T. ) ; +#1745 = ORIENTED_EDGE ( 'NONE', *, *, #5226, .T. ) ; +#1746 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999930300, -7.500000000000009800, 78.75000000000001400 ) ) ; +#1747 = CIRCLE ( 'NONE', #121, 3.189999999999998600 ) ; +#1748 = VERTEX_POINT ( 'NONE', #4200 ) ; +#1749 = AXIS2_PLACEMENT_3D ( 'NONE', #3545, #1831, #4834 ) ; +#1750 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1751 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000700, 15.00000000000000500, 16.56854249492388200 ) ) ; +#1752 = VECTOR ( 'NONE', #1627, 1000.000000000000000 ) ; +#1753 = AXIS2_PLACEMENT_3D ( 'NONE', #3457, #1318, #3421 ) ; +#1754 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #1786, #3385, ( #590 ) ) ; +#1755 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1756 = CIRCLE ( 'NONE', #4422, 1.199999999999992600 ) ; +#1757 = VECTOR ( 'NONE', #5440, 1000.000000000000000 ) ; +#1758 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1759 = ADVANCED_FACE ( 'NONE', ( #4716 ), #2439, .T. ) ; +#1760 = FACE_OUTER_BOUND ( 'NONE', #1492, .T. ) ; +#1761 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.00000000000000000, 68.75000000000001400 ) ) ; +#1762 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1763 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 5.928593550334433700E-014, 2.500000000000000000 ) ) ; +#1764 = EDGE_LOOP ( 'NONE', ( #852, #1073, #1984, #4560 ) ) ; +#1765 = EDGE_CURVE ( 'NONE', #4096, #996, #3577, .T. ) ; +#1766 = VECTOR ( 'NONE', #87, 1000.000000000000000 ) ; +#1767 = EDGE_CURVE ( 'NONE', #1725, #3329, #270, .T. ) ; +#1768 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999996400, -6.249999999999982200, 77.50000000000001400 ) ) ; +#1769 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.387778780781444500E-015, 0.0000000000000000000 ) ) ; +#1770 = CIRCLE ( 'NONE', #2868, 1.199999999999999700 ) ; +#1771 = ORIENTED_EDGE ( 'NONE', *, *, #370, .F. ) ; +#1772 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -15.43121245093975300, 11.12379794200893500 ) ) ; +#1773 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 9.757819552369541900E-016, 0.0000000000000000000 ) ) ; +#1774 = ORIENTED_EDGE ( 'NONE', *, *, #2273, .T. ) ; +#1775 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.500000000000003600, 67.00000000000001400 ) ) ; +#1776 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -30.00000000000001400, 61.20000000000000300 ) ) ; +#1777 = CARTESIAN_POINT ( 'NONE', ( 9.184850993604820600E-016, -5.000000000000006200, 78.75000000000001400 ) ) ; +#1778 = EDGE_LOOP ( 'NONE', ( #3660, #5460, #394 ) ) ; +#1779 = VERTEX_POINT ( 'NONE', #49 ) ; +#1780 = AXIS2_PLACEMENT_3D ( 'NONE', #835, #816, #798 ) ; +#1781 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1782 = ADVANCED_FACE ( 'NONE', ( #134 ), #2707, .T. ) ; +#1783 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 1.558336141341071200, 0.1776799296843169800 ) ) ; +#1784 = EDGE_LOOP ( 'NONE', ( #1040, #1788, #519, #1949 ) ) ; +#1785 = AXIS2_PLACEMENT_3D ( 'NONE', #5399, #2873, #3299 ) ; +#1786 = DATE_AND_TIME ( #2934, #4069 ) ; +#1787 = ORIENTED_EDGE ( 'NONE', *, *, #565, .T. ) ; +#1788 = ORIENTED_EDGE ( 'NONE', *, *, #4894, .T. ) ; +#1789 = DIRECTION ( 'NONE', ( 5.551115123125778000E-015, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1790 = AXIS2_PLACEMENT_3D ( 'NONE', #3210, #4070, #5311 ) ; +#1791 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1792 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001300, -6.250000000000006200, 77.50000000000001400 ) ) ; +#1793 = FACE_OUTER_BOUND ( 'NONE', #3925, .T. ) ; +#1794 = ORIENTED_EDGE ( 'NONE', *, *, #601, .T. ) ; +#1795 = ORIENTED_EDGE ( 'NONE', *, *, #675, .F. ) ; +#1796 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1797 = EDGE_CURVE ( 'NONE', #3889, #220, #1099, .T. ) ; +#1798 = VERTEX_POINT ( 'NONE', #5157 ) ; +#1799 = DIRECTION ( 'NONE', ( 1.224646799147276800E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1800 = EDGE_CURVE ( 'NONE', #2959, #2464, #2301, .T. ) ; +#1801 = VECTOR ( 'NONE', #3493, 1000.000000000000000 ) ; +#1802 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -35.00000000000000000, 0.0000000000000000000 ) ) ; +#1803 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1255, #833, #3305, #725, #3726, #1165, #4174, #1593, #4597, #2031, #5011, #2467, #5424, #2899 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0002590745622343900500, 0.0005181491244687800900, 0.001036298248937543500, 0.001554447373406307000, 0.001813521935640703800, 0.002072596497875100900 ), + .UNSPECIFIED. ) ; +#1804 = ORIENTED_EDGE ( 'NONE', *, *, #3064, .F. ) ; +#1805 = ORIENTED_EDGE ( 'NONE', *, *, #4579, .T. ) ; +#1806 = VECTOR ( 'NONE', #3951, 1000.000000000000000 ) ; +#1807 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.387778780781442500E-015, 0.0000000000000000000 ) ) ; +#1808 = EDGE_CURVE ( 'NONE', #97, #1876, #3442, .T. ) ; +#1809 = ORIENTED_EDGE ( 'NONE', *, *, #3779, .T. ) ; +#1810 = ORIENTED_EDGE ( 'NONE', *, *, #1008, .F. ) ; +#1811 = LINE ( 'NONE', #1009, #1677 ) ; +#1812 = CARTESIAN_POINT ( 'NONE', ( 1.035533905932738600, -21.53553390593274100, 1.646628118103067600E-016 ) ) ; +#1813 = CARTESIAN_POINT ( 'NONE', ( 0.6344776708425147200, -9.920637771091954000, 76.67342270231202400 ) ) ; +#1814 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.224646799147276800E-016, 0.0000000000000000000 ) ) ; +#1815 = ADVANCED_FACE ( 'NONE', ( #4578 ), #2173, .F. ) ; +#1816 = CIRCLE ( 'NONE', #1671, 3.189999999999998600 ) ; +#1817 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1818 = AXIS2_PLACEMENT_3D ( 'NONE', #3474, #3467, #3458 ) ; +#1819 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -35.00000000000000000, 35.00000000000000000 ) ) ; +#1820 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9961946980917454300, -0.08715574274765869300 ) ) ; +#1821 = VECTOR ( 'NONE', #156, 1000.000000000000000 ) ; +#1822 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 3.100738599260585800, 3.924477145023462100 ) ) ; +#1823 = CIRCLE ( 'NONE', #2515, 2.500000000000002200 ) ; +#1824 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.734723475976805600E-016, 0.0000000000000000000 ) ) ; +#1825 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999932100, -7.676406080878335200, 77.50000000000000000 ) ) ; +#1826 = FACE_OUTER_BOUND ( 'NONE', #3267, .T. ) ; +#1827 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1828 = VERTEX_POINT ( 'NONE', #2600 ) ; +#1829 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1830 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1831 = DIRECTION ( 'NONE', ( 1.224646799147276800E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1832 = LINE ( 'NONE', #2463, #2853 ) ; +#1833 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1834 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -16.25000000000001400, 80.00000000000000000 ) ) ; +#1835 = EDGE_CURVE ( 'NONE', #2473, #1862, #413, .T. ) ; +#1836 = EDGE_CURVE ( 'NONE', #3480, #3078, #4447, .T. ) ; +#1837 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 11.57951598014720500, 26.25041600425122100 ) ) ; +#1838 = ADVANCED_FACE ( 'NONE', ( #11 ), #427, .F. ) ; +#1839 = LINE ( 'NONE', #2198, #1708 ) ; +#1840 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -23.00000000000000400, 1.040834085586084700E-015 ) ) ; +#1841 = CARTESIAN_POINT ( 'NONE', ( 1.454918921808905300E-013, 4.792925087599685200, 2.092114683742774900 ) ) ; +#1842 = EDGE_LOOP ( 'NONE', ( #345, #1095, #1875 ) ) ; +#1843 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999998600, -18.74999999999998200, 77.50000000000001400 ) ) ; +#1844 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -35.00000000000000000, 35.00000000000000000 ) ) ; +#1845 = ORIENTED_EDGE ( 'NONE', *, *, #3645, .F. ) ; +#1846 = EDGE_LOOP ( 'NONE', ( #4351, #5302, #500, #5206 ) ) ; +#1847 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807100E-016 ) ) ; +#1848 = EDGE_CURVE ( 'NONE', #4344, #1594, #5411, .T. ) ; +#1849 = EDGE_LOOP ( 'NONE', ( #4153, #1252, #1249, #3009 ) ) ; +#1850 = ORIENTED_EDGE ( 'NONE', *, *, #1347, .F. ) ; +#1851 = PLANE ( 'NONE', #3182 ) ; +#1852 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1853 = DIRECTION ( 'NONE', ( -1.122400076403071000E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1854 = ORIENTED_EDGE ( 'NONE', *, *, #832, .T. ) ; +#1855 = AXIS2_PLACEMENT_3D ( 'NONE', #2374, #4926, #2356 ) ; +#1856 = FACE_OUTER_BOUND ( 'NONE', #2125, .T. ) ; +#1857 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1858 = ORIENTED_EDGE ( 'NONE', *, *, #3097, .F. ) ; +#1859 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 2.070748964893636600, 3.153494935207926500 ) ) ; +#1860 = AXIS2_PLACEMENT_3D ( 'NONE', #2903, #320, #3326 ) ; +#1861 = ORIENTED_EDGE ( 'NONE', *, *, #2685, .T. ) ; +#1862 = VERTEX_POINT ( 'NONE', #4283 ) ; +#1863 = LINE ( 'NONE', #4166, #712 ) ; +#1864 = ORIENTED_EDGE ( 'NONE', *, *, #3636, .F. ) ; +#1865 = DIRECTION ( 'NONE', ( 1.224646799147276800E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1866 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -35.00000000000000000, 35.00000000000000000 ) ) ; +#1867 = EDGE_LOOP ( 'NONE', ( #78, #185, #2206, #3869 ) ) ; +#1868 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.122400076403071000E-016, 6.123233995737361400E-017 ) ) ; +#1869 = ORIENTED_EDGE ( 'NONE', *, *, #3387, .F. ) ; +#1870 = ADVANCED_FACE ( 'NONE', ( #4315 ), #5281, .T. ) ; +#1871 = LINE ( 'NONE', #1963, #719 ) ; +#1872 = EDGE_CURVE ( 'NONE', #1992, #245, #884, .T. ) ; +#1873 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1874 = EDGE_CURVE ( 'NONE', #2888, #2669, #3165, .T. ) ; +#1875 = ORIENTED_EDGE ( 'NONE', *, *, #135, .T. ) ; +#1876 = VERTEX_POINT ( 'NONE', #5101 ) ; +#1877 = CARTESIAN_POINT ( 'NONE', ( 7.654042494671701100E-017, 1.249999999999992700, 78.75000000000001400 ) ) ; +#1878 = VECTOR ( 'NONE', #4182, 1000.000000000000000 ) ; +#1879 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -35.00000000000000700, 77.50000000000000000 ) ) ; +#1880 = CARTESIAN_POINT ( 'NONE', ( 3.903127820947816800E-015, 8.450796551612878500, 6.915464946458979700 ) ) ; +#1881 = VERTEX_POINT ( 'NONE', #2126 ) ; +#1882 = LINE ( 'NONE', #2087, #5016 ) ; +#1883 = ORIENTED_EDGE ( 'NONE', *, *, #2739, .F. ) ; +#1884 = EDGE_CURVE ( 'NONE', #5453, #776, #2028, .T. ) ; +#1885 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#1886 = CIRCLE ( 'NONE', #4101, 3.189999999999998600 ) ; +#1887 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1888 = VECTOR ( 'NONE', #5083, 1000.000000000000000 ) ; +#1889 = TOROIDAL_SURFACE ( 'NONE', #1329, 1.250000000000002200, 1.250000000000000000 ) ; +#1890 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -25.50000000000000400, 42.49999999999999300 ) ) ; +#1891 = AXIS2_PLACEMENT_3D ( 'NONE', #2968, #2927, #2912 ) ; +#1892 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999995000, 3.750000000000028400, 77.50000000000001400 ) ) ; +#1893 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -30.00000000000001100, 80.00000000000000000 ) ) ; +#1894 = LINE ( 'NONE', #53, #4038 ) ; +#1895 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9961946980917455500, 0.08715574274765822100 ) ) ; +#1896 = ADVANCED_FACE ( 'NONE', ( #4178 ), #4034, .T. ) ; +#1897 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 9.688672374672759000, 9.433276838253874500 ) ) ; +#1898 = ORIENTED_EDGE ( 'NONE', *, *, #3599, .F. ) ; +#1899 = PLANE ( 'NONE', #5249 ) ; +#1900 = AXIS2_PLACEMENT_3D ( 'NONE', #3382, #807, #3813 ) ; +#1901 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -118.8152730712011000, 79.99999999999998600 ) ) ; +#1902 = LINE ( 'NONE', #260, #1766 ) ; +#1903 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1904 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1905 = CARTESIAN_POINT ( 'NONE', ( 1.377727649040711600E-015, -8.750000000000012400, 77.50000000000001400 ) ) ; +#1906 = LINE ( 'NONE', #4516, #4049 ) ; +#1907 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1908 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.734723475976807100E-016, 1.000000000000000000 ) ) ; +#1909 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1910 = VERTEX_POINT ( 'NONE', #1239 ) ; +#1911 = EDGE_CURVE ( 'NONE', #4849, #1131, #739, .T. ) ; +#1912 = EDGE_CURVE ( 'NONE', #2522, #1729, #2352, .T. ) ; +#1913 = CARTESIAN_POINT ( 'NONE', ( 33.39999999999994200, 10.00000000000002000, 68.75000000000001400 ) ) ; +#1914 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -8.749999999999989300, 75.00000000000001400 ) ) ; +#1915 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#1916 = ORIENTED_EDGE ( 'NONE', *, *, #1506, .T. ) ; +#1917 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -2.449200000000003800, 67.00000000000001400 ) ) ; +#1918 = ORIENTED_EDGE ( 'NONE', *, *, #1191, .T. ) ; +#1919 = VERTEX_POINT ( 'NONE', #2246 ) ; +#1920 = EDGE_LOOP ( 'NONE', ( #2663, #1057, #1334, #2729 ) ) ; +#1921 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#1922 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1923 = APPROVAL_DATE_TIME ( #3065, #892 ) ; +#1924 = ADVANCED_FACE ( 'NONE', ( #3039 ), #1016, .T. ) ; +#1925 = VERTEX_POINT ( 'NONE', #1840 ) ; +#1926 = EDGE_CURVE ( 'NONE', #1607, #817, #5160, .T. ) ; +#1927 = ORIENTED_EDGE ( 'NONE', *, *, #2830, .T. ) ; +#1928 = AXIS2_PLACEMENT_3D ( 'NONE', #2055, #2907, #2925 ) ; +#1929 = CARTESIAN_POINT ( 'NONE', ( 34.94133434067537500, -15.21581367434773700, 75.54366197500799300 ) ) ; +#1930 = TOROIDAL_SURFACE ( 'NONE', #1396, 1.250000000000002200, 1.250000000000000000 ) ; +#1931 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -118.8152730712011000, 79.99999999999998600 ) ) ; +#1932 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -30.00000000000001100, 77.50000000000000000 ) ) ; +#1933 = ORIENTED_EDGE ( 'NONE', *, *, #5466, .T. ) ; +#1934 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1935 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1936 = ORIENTED_EDGE ( 'NONE', *, *, #501, .T. ) ; +#1937 = AXIS2_PLACEMENT_3D ( 'NONE', #5276, #2310, #4866 ) ; +#1938 = ORIENTED_EDGE ( 'NONE', *, *, #4027, .T. ) ; +#1939 = EDGE_LOOP ( 'NONE', ( #522, #5197, #3283, #3745 ) ) ; +#1940 = ORIENTED_EDGE ( 'NONE', *, *, #4112, .T. ) ; +#1941 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1942 = ORIENTED_EDGE ( 'NONE', *, *, #184, .T. ) ; +#1943 = ORIENTED_EDGE ( 'NONE', *, *, #529, .T. ) ; +#1944 = ORIENTED_EDGE ( 'NONE', *, *, #5131, .F. ) ; +#1945 = LINE ( 'NONE', #493, #796 ) ; +#1946 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1947 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 2.775557561562891400E-016 ) ) ; +#1948 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -25.50000000000000400, 7.499999999999996400 ) ) ; +#1949 = ORIENTED_EDGE ( 'NONE', *, *, #1017, .F. ) ; +#1950 = ORIENTED_EDGE ( 'NONE', *, *, #1190, .F. ) ; +#1951 = CIRCLE ( 'NONE', #885, 0.5000000000000004400 ) ; +#1952 = EDGE_CURVE ( 'NONE', #697, #1519, #2904, .T. ) ; +#1953 = EDGE_CURVE ( 'NONE', #1862, #2473, #1756, .T. ) ; +#1954 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 12.49999999995191800, 36.53531357385458000 ) ) ; +#1955 = CARTESIAN_POINT ( 'NONE', ( 9.184850993604820600E-016, -5.000000000000006200, 77.50000000000001400 ) ) ; +#1956 = LINE ( 'NONE', #1441, #806 ) ; +#1957 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1958 = ADVANCED_FACE ( 'NONE', ( #3907 ), #1899, .F. ) ; +#1959 = CARTESIAN_POINT ( 'NONE', ( 34.83482033433765000, -5.003928704951172300, 76.14100086755193800 ) ) ; +#1960 = CARTESIAN_POINT ( 'NONE', ( 33.39999999999999100, -24.99999999999997900, 65.56000000000001600 ) ) ; +#1961 = LINE ( 'NONE', #141, #4383 ) ; +#1962 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1963 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.999999999999994700, 67.55000000000001100 ) ) ; +#1964 = LINE ( 'NONE', #2842, #2974 ) ; +#1965 = AXIS2_PLACEMENT_3D ( 'NONE', #2295, #4865, #2309 ) ; +#1966 = CIRCLE ( 'NONE', #418, 2.500000000000002200 ) ; +#1967 = AXIS2_PLACEMENT_3D ( 'NONE', #2159, #3853, #846 ) ; +#1968 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000700, 13.48907921215078400, 22.40081566136895600 ) ) ; +#1969 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -35.00000000000000000, 35.00000000000000000 ) ) ; +#1970 = CARTESIAN_POINT ( 'NONE', ( 3.061616997868437900E-016, -7.459310946700275200E-015, 77.50000000000001400 ) ) ; +#1971 = AXIS2_PLACEMENT_3D ( 'NONE', #981, #1382, #3981 ) ; +#1972 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 7.625158136161789500E-017 ) ) ; +#1973 = CIRCLE ( 'NONE', #3051, 5.050799999999999700 ) ; +#1974 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 9.203064985270957600, 15.32604490375189600 ) ) ; +#1975 = AXIS2_PLACEMENT_3D ( 'NONE', #2277, #5239, #2708 ) ; +#1976 = LINE ( 'NONE', #2596, #4266 ) ; +#1977 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1978 = PLANE ( 'NONE', #1430 ) ; +#1979 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1980 = EDGE_CURVE ( 'NONE', #2410, #3668, #1619, .T. ) ; +#1981 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -25.00000000000000000, 67.55000000000001100 ) ) ; +#1982 = EDGE_CURVE ( 'NONE', #2652, #4929, #597, .T. ) ; +#1983 = VERTEX_POINT ( 'NONE', #4239 ) ; +#1984 = ORIENTED_EDGE ( 'NONE', *, *, #3311, .F. ) ; +#1985 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1986 = ORIENTED_EDGE ( 'NONE', *, *, #3063, .F. ) ; +#1987 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 10.72793749016966700, 11.94875546519539200 ) ) ; +#1988 = CARTESIAN_POINT ( 'NONE', ( -1.249999999999999300, -20.00000000000000700, 77.50000000000001400 ) ) ; +#1989 = EDGE_LOOP ( 'NONE', ( #917, #4491, #1128, #2676 ) ) ; +#1990 = EDGE_CURVE ( 'NONE', #369, #4357, #2773, .T. ) ; +#1991 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -30.00000000000001100, 77.50000000000000000 ) ) ; +#1992 = VERTEX_POINT ( 'NONE', #4928 ) ; +#1993 = LINE ( 'NONE', #2419, #848 ) ; +#1994 = ORIENTED_EDGE ( 'NONE', *, *, #4608, .F. ) ; +#1995 = CARTESIAN_POINT ( 'NONE', ( 2.296212748401168500E-015, -15.00000000000000900, 77.50000000000001400 ) ) ; +#1996 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, -15.00000000000000900, 77.50000000000001400 ) ) ; +#1997 = PLANE ( 'NONE', #2162 ) ; +#1998 = ORIENTED_EDGE ( 'NONE', *, *, #564, .T. ) ; +#1999 = ORIENTED_EDGE ( 'NONE', *, *, #4904, .T. ) ; +#2000 = FACE_OUTER_BOUND ( 'NONE', #3073, .T. ) ; +#2001 = ORIENTED_EDGE ( 'NONE', *, *, #2382, .T. ) ; +#2002 = ORIENTED_EDGE ( 'NONE', *, *, #2221, .T. ) ; +#2003 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -24.99999999999997900, 67.55000000000002600 ) ) ; +#2004 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 4.845388069103249200, 5.865534890299093400 ) ) ; +#2005 = ORIENTED_EDGE ( 'NONE', *, *, #484, .F. ) ; +#2006 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999997200, -9.999999999999987600, 77.50000000000001400 ) ) ; +#2007 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -15.00000000000000900, 75.00000000000001400 ) ) ; +#2008 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, -35.00000000000000700, 72.50000000000001400 ) ) ; +#2009 = CIRCLE ( 'NONE', #263, 2.499999999999988500 ) ; +#2010 = CARTESIAN_POINT ( 'NONE', ( 1.804134340897618000, -5.761241312918463600, 77.40480650930256000 ) ) ; +#2011 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, 18.28184403566698200, 61.20000000000001000 ) ) ; +#2012 = VERTEX_POINT ( 'NONE', #2376 ) ; +#2013 = VERTEX_POINT ( 'NONE', #4033 ) ; +#2014 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9961946980917455500, -0.08715574274765822100 ) ) ; +#2015 = LINE ( 'NONE', #301, #4162 ) ; +#2016 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2017 = ORIENTED_EDGE ( 'NONE', *, *, #2345, .T. ) ; +#2018 = PLANE ( 'NONE', #3717 ) ; +#2019 = VECTOR ( 'NONE', #1182, 1000.000000000000000 ) ; +#2020 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -118.8152730712010900, -1.584067479118454000E-014 ) ) ; +#2021 = EDGE_CURVE ( 'NONE', #110, #4474, #4905, .T. ) ; +#2022 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4624, #2492, #5441, #2921, #334, #3348, #765, #3775, #1209, #4211, #1635, #4644, #2072, #5046, #2511, #5462, #2937, #355, #3369, #790, #3790, #1229, #4235, #1652, #4661, #2092, #5067, #2526, #5476, #2961, #373, #3383 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.01029995825437036600, 0.01544993738155555800, 0.02059991650874075000, 0.02317490607233334300, 0.02574989563592593200, 0.03089987476311112700, 0.03347486432670372000, 0.03476235910850002100, 0.03604985389029632300, 0.03733734867209262400, 0.03798109606299077800, 0.03862484345388892500, 0.03991233823568522700, 0.04055608562658337400, 0.04119983301748152100 ), + .UNSPECIFIED. ) ; +#2023 = LINE ( 'NONE', #2898, #4175 ) ; +#2024 = EDGE_CURVE ( 'NONE', #227, #176, #2645, .T. ) ; +#2025 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 4.350717159479844800, 1.696608661144607000 ) ) ; +#2026 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2027 = CARTESIAN_POINT ( 'NONE', ( 37.50099999999998300, -25.50000000000000400, 24.99999999999999600 ) ) ; +#2028 = LINE ( 'NONE', #5505, #1888 ) ; +#2029 = CIRCLE ( 'NONE', #5154, 5.050799999999998000 ) ; +#2030 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -2.220446049250313400E-014, 80.00000000000001400 ) ) ; +#2031 = CARTESIAN_POINT ( 'NONE', ( 34.82605237396698100, 0.04427987841305308600, 75.91995117316851300 ) ) ; +#2032 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1117, #4123, #2425, #5373 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 7.589415207398532000E-019, 0.0002967085115978145900 ), + .UNSPECIFIED. ) ; +#2033 = CIRCLE ( 'NONE', #1467, 1.250000000000001100 ) ; +#2034 = EDGE_CURVE ( 'NONE', #2616, #3573, #477, .T. ) ; +#2035 = ORIENTED_EDGE ( 'NONE', *, *, #825, .T. ) ; +#2036 = CARTESIAN_POINT ( 'NONE', ( 0.007709905232701103600, -9.476896896326474400, 75.22171533840321400 ) ) ; +#2037 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#2038 = AXIS2_PLACEMENT_3D ( 'NONE', #1440, #4450, #1873 ) ; +#2039 = TOROIDAL_SURFACE ( 'NONE', #3227, 1.250000000000002200, 1.250000000000000000 ) ; +#2040 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2041 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 2.521760997725991600, 0.5597823265825903100 ) ) ; +#2042 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -15.43121245093975300, 11.12379794200893500 ) ) ; +#2043 = CIRCLE ( 'NONE', #261, 1.250000000000001100 ) ; +#2044 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #454, .NOT_KNOWN. ) ; +#2045 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 14.82648371122307100, 32.92676608844791300 ) ) ; +#2046 = CARTESIAN_POINT ( 'NONE', ( 34.90287534330131800, 13.19006527892304500, 68.39065433413489400 ) ) ; +#2047 = ORIENTED_EDGE ( 'NONE', *, *, #4894, .F. ) ; +#2048 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2049 = VERTEX_POINT ( 'NONE', #2808 ) ; +#2050 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2051 = EDGE_CURVE ( 'NONE', #1748, #5105, #4771, .T. ) ; +#2052 = ORIENTED_EDGE ( 'NONE', *, *, #35, .T. ) ; +#2053 = EDGE_CURVE ( 'NONE', #2553, #2652, #2503, .T. ) ; +#2054 = ORIENTED_EDGE ( 'NONE', *, *, #321, .T. ) ; +#2055 = CARTESIAN_POINT ( 'NONE', ( 1.377727649040711600E-015, -8.750000000000012400, 77.50000000000001400 ) ) ; +#2056 = APPROVAL_PERSON_ORGANIZATION ( #3197, #892, #2963 ) ; +#2057 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 3.295258384803363600E-014, 2.500000000000000000 ) ) ; +#2058 = ORIENTED_EDGE ( 'NONE', *, *, #3735, .F. ) ; +#2059 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -25.50000000000000400, 41.29999999999999700 ) ) ; +#2060 = VERTEX_POINT ( 'NONE', #3215 ) ; +#2061 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.00000000000000000, 65.56000000000001600 ) ) ; +#2062 = CIRCLE ( 'NONE', #2556, 3.189999999999998600 ) ; +#2063 = CARTESIAN_POINT ( 'NONE', ( -3.707814714446397500E-013, 13.15706502122621300, 20.68164927954804400 ) ) ; +#2064 = ORIENTED_EDGE ( 'NONE', *, *, #3927, .T. ) ; +#2065 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, -30.00000000000000700, 55.00000000000000700 ) ) ; +#2066 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -25.50000000000000400, 8.699999999999995700 ) ) ; +#2067 = VERTEX_POINT ( 'NONE', #1960 ) ; +#2068 = ORIENTED_EDGE ( 'NONE', *, *, #1733, .F. ) ; +#2069 = FACE_OUTER_BOUND ( 'NONE', #5308, .T. ) ; +#2070 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.387778780781442500E-015, 0.0000000000000000000 ) ) ; +#2071 = ADVANCED_FACE ( 'NONE', ( #335 ), #1217, .F. ) ; +#2072 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 7.772934438063234800, 11.22610013941957300 ) ) ; +#2073 = ORIENTED_EDGE ( 'NONE', *, *, #3032, .T. ) ; +#2074 = VERTEX_POINT ( 'NONE', #4915 ) ; +#2075 = VECTOR ( 'NONE', #5168, 1000.000000000000000 ) ; +#2076 = AXIS2_PLACEMENT_3D ( 'NONE', #5039, #2500, #5450 ) ; +#2077 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2078 = PLANE ( 'NONE', #4702 ) ; +#2079 = VERTEX_POINT ( 'NONE', #5299 ) ; +#2080 = ORIENTED_EDGE ( 'NONE', *, *, #1836, .F. ) ; +#2081 = FACE_OUTER_BOUND ( 'NONE', #3747, .T. ) ; +#2082 = ORIENTED_EDGE ( 'NONE', *, *, #4029, .T. ) ; +#2083 = AXIS2_PLACEMENT_3D ( 'NONE', #4526, #1957, #5350 ) ; +#2084 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -118.8152730712010900, -2.191220695710335200E-014 ) ) ; +#2085 = CARTESIAN_POINT ( 'NONE', ( 32.49999999999999300, 7.460236274036563300, 5.289152977381816000 ) ) ; +#2086 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, -23.80000000000000100, 68.75000000000001400 ) ) ; +#2087 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -2.449199999999998500, 79.99999999999997200 ) ) ; +#2088 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000900, 78.75000000000001400 ) ) ; +#2089 = CIRCLE ( 'NONE', #526, 5.050799999999998000 ) ; +#2090 = EDGE_CURVE ( 'NONE', #647, #1386, #4646, .T. ) ; +#2091 = EDGE_CURVE ( 'NONE', #2343, #1189, #1358, .T. ) ; +#2092 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 2.075993403555361500, 3.144492667493052000 ) ) ; +#2093 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#2094 = FACE_OUTER_BOUND ( 'NONE', #357, .T. ) ; +#2095 = LINE ( 'NONE', #3941, #1085 ) ; +#2096 = PLANE ( 'NONE', #3939 ) ; +#2097 = VECTOR ( 'NONE', #2329, 999.9999999999998900 ) ; +#2098 = EDGE_CURVE ( 'NONE', #3287, #241, #2365, .T. ) ; +#2099 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2100 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2101 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, -16.25000000000000700, 77.50000000000001400 ) ) ; +#2102 = ADVANCED_FACE ( 'NONE', ( #3505 ), #1437, .F. ) ; +#2103 = EDGE_LOOP ( 'NONE', ( #4612, #3791, #230, #517 ) ) ; +#2104 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, -30.00000000000001100, 72.50000000000001400 ) ) ; +#2105 = LINE ( 'NONE', #3534, #4257 ) ; +#2106 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000002100, 0.4815090072591525800, 5.327837238229549900E-015 ) ) ; +#2107 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -0.0000000000000000000, 2.500000000000000000 ) ) ; +#2108 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2109 = CIRCLE ( 'NONE', #2474, 3.189999999999998600 ) ; +#2110 = AXIS2_PLACEMENT_3D ( 'NONE', #3765, #3788, #3937 ) ; +#2111 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -18.75000000000000700, 80.00000000000001400 ) ) ; +#2112 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.940206225469880900, 10.46841981887819600 ) ) ; +#2113 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -24.99999999999997900, 68.75000000000001400 ) ) ; +#2114 = DATE_TIME_ROLE ( 'classification_date' ) ; +#2115 = AXIS2_PLACEMENT_3D ( 'NONE', #2759, #162, #3178 ) ; +#2116 = FACE_BOUND ( 'NONE', #631, .T. ) ; +#2117 = CARTESIAN_POINT ( 'NONE', ( 0.03661312917874534600, -5.303202136711041300, 75.43067845327583100 ) ) ; +#2118 = AXIS2_PLACEMENT_3D ( 'NONE', #3396, #388, #2971 ) ; +#2119 = CARTESIAN_POINT ( 'NONE', ( -7.199102425303746900E-014, -7.500000000000009800, 80.00000000000001400 ) ) ; +#2120 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #4502, #208, #4523 ), + ( #1954, #4937, #2384 ), + ( #5345, #2819, #223 ), + ( #3244, #660, #3666 ), + ( #1098, #4109, #1535 ), + ( #4539, #1968, #4957 ), + ( #2402, #5359, #2840 ), + ( #247, #3260, #676 ), + ( #3687, #1119, #4124 ), + ( #1554, #4559, #1987 ), + ( #4970, #2427, #5375 ), + ( #2856, #266, #3282 ), + ( #693, #3704, #1142 ), + ( #4143, #1569, #4575 ), + ( #2004, #4984, #2444 ), + ( #5398, #2872, #284 ), + ( #3298, #715, #3719 ), + ( #1158, #4165, #1584 ), + ( #4592, #2025, #5002 ), + ( #2460, #5416, #2893 ), + ( #304, #3315, #736 ), + ( #3739, #1174, #4184 ), + ( #1605, #4609, #2041 ), + ( #5022, #2479, #5430 ), + ( #2910, #328, #3331 ), + ( #753, #3762, #1196 ), + ( #4198, #1624, #4631 ), + ( #2057, #5038, #2499 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.01032138658544600300, 0.01548207987816900400, 0.02064277317089200500, 0.02580346646361500500, 0.03096415975633800800, 0.03354450640269950700, 0.03612485304906101100, 0.03741502637224175500, 0.03870519969542250700, 0.03935028635701288300, 0.03999537301860325900, 0.04064045968019363400, 0.04128554634178401000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865472400, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865472400, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865474600, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865474600, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865474600, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865474600, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2121 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000007800, -7.500000000000009800, 77.50000000000001400 ) ) ; +#2122 = ORIENTED_EDGE ( 'NONE', *, *, #1911, .T. ) ; +#2123 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2124 = ORIENTED_EDGE ( 'NONE', *, *, #1044, .F. ) ; +#2125 = EDGE_LOOP ( 'NONE', ( #4138, #2404, #1002 ) ) ; +#2126 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -2.449200000000007400, 15.49999999999998400 ) ) ; +#2127 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.999999999999994700, 68.75000000000001400 ) ) ; +#2128 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -30.00000000000001100, 77.50000000000000000 ) ) ; +#2129 = VERTEX_POINT ( 'NONE', #4642 ) ; +#2130 = CARTESIAN_POINT ( 'NONE', ( 34.63214864235385400, -15.00000000000000900, 76.30535135764616000 ) ) ; +#2131 = ORIENTED_EDGE ( 'NONE', *, *, #4446, .F. ) ; +#2132 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000004000, 1.878049920874442600, 0.2955015899979019900 ) ) ; +#2133 = ADVANCED_FACE ( 'NONE', ( #2233 ), #5470, .T. ) ; +#2134 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 4.592183231716228800, 5.559424269923190400 ) ) ; +#2135 = ORIENTED_EDGE ( 'NONE', *, *, #3984, .T. ) ; +#2136 = EDGE_CURVE ( 'NONE', #4390, #3350, #1083, .T. ) ; +#2137 = EDGE_CURVE ( 'NONE', #1925, #655, #3370, .T. ) ; +#2138 = CIRCLE ( 'NONE', #1000, 2.500000000000002200 ) ; +#2139 = VERTEX_POINT ( 'NONE', #3193 ) ; +#2140 = VERTEX_POINT ( 'NONE', #2378 ) ; +#2141 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -12.55080000000000200, 67.00000000000001400 ) ) ; +#2142 = ORIENTED_EDGE ( 'NONE', *, *, #2182, .T. ) ; +#2143 = CARTESIAN_POINT ( 'NONE', ( 34.36385346292402000, -9.920180951052337500, 76.67517769544254200 ) ) ; +#2144 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2145 = VECTOR ( 'NONE', #4540, 1000.000000000000000 ) ; +#2146 = ORIENTED_EDGE ( 'NONE', *, *, #1346, .F. ) ; +#2147 = ORIENTED_EDGE ( 'NONE', *, *, #1045, .T. ) ; +#2148 = ORIENTED_EDGE ( 'NONE', *, *, #2456, .T. ) ; +#2149 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2150 = ORIENTED_EDGE ( 'NONE', *, *, #3809, .T. ) ; +#2151 = EDGE_CURVE ( 'NONE', #3583, #1413, #3234, .T. ) ; +#2152 = LINE ( 'NONE', #610, #5387 ) ; +#2153 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995000, 3.750000000000024900, 77.50000000000001400 ) ) ; +#2154 = AXIS2_PLACEMENT_3D ( 'NONE', #1264, #4265, #1690 ) ; +#2155 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000004000, 10.41860646558206600, 11.19647680612957300 ) ) ; +#2156 = ORIENTED_EDGE ( 'NONE', *, *, #1311, .T. ) ; +#2157 = ORIENTED_EDGE ( 'NONE', *, *, #971, .F. ) ; +#2158 = VECTOR ( 'NONE', #5397, 1000.000000000000000 ) ; +#2159 = CARTESIAN_POINT ( 'NONE', ( 33.39999999999999100, -23.79999999999997600, 68.75000000000001400 ) ) ; +#2160 = AXIS2_PLACEMENT_3D ( 'NONE', #3213, #197, #2413 ) ; +#2161 = ORIENTED_EDGE ( 'NONE', *, *, #4919, .F. ) ; +#2162 = AXIS2_PLACEMENT_3D ( 'NONE', #707, #3715, #1151 ) ; +#2163 = VECTOR ( 'NONE', #3822, 1000.000000000000000 ) ; +#2164 = ORIENTED_EDGE ( 'NONE', *, *, #4331, .T. ) ; +#2165 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 9.999999999999994700, 67.55000000000001100 ) ) ; +#2166 = CARTESIAN_POINT ( 'NONE', ( 34.36552232915755000, -5.079362228908048700, 76.67342270231192500 ) ) ; +#2167 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2168 = ADVANCED_FACE ( 'NONE', ( #4510, #2094 ), #2811, .F. ) ; +#2169 = CIRCLE ( 'NONE', #2667, 3.189999999999998600 ) ; +#2170 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 12.49999999999999800, 1.084202172485504400E-015 ) ) ; +#2171 = CARTESIAN_POINT ( 'NONE', ( 37.50099999999998300, -25.50000000000000400, 7.499999999999996400 ) ) ; +#2172 = DIRECTION ( 'NONE', ( 1.224646799147353200E-016, 1.499759782661764000E-032, 1.000000000000000000 ) ) ; +#2173 = CYLINDRICAL_SURFACE ( 'NONE', #1539, 3.189999999999998600 ) ; +#2174 = EDGE_CURVE ( 'NONE', #2618, #869, #947, .T. ) ; +#2175 = LINE ( 'NONE', #3291, #3302 ) ; +#2176 = EDGE_CURVE ( 'NONE', #1779, #1594, #2577, .T. ) ; +#2177 = CARTESIAN_POINT ( 'NONE', ( 33.39999999999999100, -24.99999999999997900, 67.55000000000002600 ) ) ; +#2178 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 5.928593550334433700E-014, 0.0000000000000000000 ) ) ; +#2179 = FACE_OUTER_BOUND ( 'NONE', #32, .T. ) ; +#2180 = ORIENTED_EDGE ( 'NONE', *, *, #499, .T. ) ; +#2181 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2182 = EDGE_CURVE ( 'NONE', #2193, #4357, #4717, .T. ) ; +#2183 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000007800, -7.323593919121680800, 77.50000000000002800 ) ) ; +#2184 = FACE_OUTER_BOUND ( 'NONE', #1245, .T. ) ; +#2185 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2186 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 5.928593550334433700E-014, 8.936314941956774400E-029 ) ) ; +#2187 = CARTESIAN_POINT ( 'NONE', ( 8.244528225426736300E-016, -10.00000000000001200, 78.75000000000001400 ) ) ; +#2188 = CIRCLE ( 'NONE', #1710, 1.250000000000001100 ) ; +#2189 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -8.673617379884035500E-017, 1.000000000000000000 ) ) ; +#2190 = ADVANCED_FACE ( 'NONE', ( #272 ), #4580, .F. ) ; +#2191 = ORIENTED_EDGE ( 'NONE', *, *, #1911, .F. ) ; +#2192 = AXIS2_PLACEMENT_3D ( 'NONE', #1775, #3920, #4776 ) ; +#2193 = VERTEX_POINT ( 'NONE', #2848 ) ; +#2194 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, -25.00000000000000000, 65.56000000000001600 ) ) ; +#2195 = AXIS2_PLACEMENT_3D ( 'NONE', #5162, #2626, #36 ) ; +#2196 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, -30.00000000000001100, 80.00000000000001400 ) ) ; +#2197 = VERTEX_POINT ( 'NONE', #257 ) ; +#2198 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -35.00000000000000700, 72.50000000000001400 ) ) ; +#2199 = ORIENTED_EDGE ( 'NONE', *, *, #4179, .T. ) ; +#2200 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.49999999999999100, 70.73143887112374300 ) ) ; +#2201 = ORIENTED_EDGE ( 'NONE', *, *, #4460, .F. ) ; +#2202 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999994300, 12.49999999999999300, 70.73143887112377100 ) ) ; +#2203 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -14.99100622546988300, 16.15537812313072400 ) ) ; +#2204 = CIRCLE ( 'NONE', #5481, 1.250000000000001100 ) ; +#2205 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.387778780781444500E-015, 0.0000000000000000000 ) ) ; +#2206 = ORIENTED_EDGE ( 'NONE', *, *, #684, .T. ) ; +#2207 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2208 = EDGE_CURVE ( 'NONE', #4973, #2716, #2441, .T. ) ; +#2209 = ORIENTED_EDGE ( 'NONE', *, *, #639, .T. ) ; +#2210 = EDGE_CURVE ( 'NONE', #1055, #110, #3700, .T. ) ; +#2211 = ORIENTED_EDGE ( 'NONE', *, *, #720, .T. ) ; +#2212 = CIRCLE ( 'NONE', #5414, 1.200000000000006600 ) ; +#2213 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -6.591949208711870900E-015, 77.50000000000001400 ) ) ; +#2214 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.500000000000003600, 67.00000000000001400 ) ) ; +#2215 = EDGE_LOOP ( 'NONE', ( #3787, #1644, #5180, #4986, #4867, #3993, #1261, #2412, #4982, #277, #607 ) ) ; +#2216 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 12.49999999999999800, 1.084202172485504400E-015 ) ) ; +#2217 = ORIENTED_EDGE ( 'NONE', *, *, #2532, .T. ) ; +#2218 = ADVANCED_FACE ( 'NONE', ( #3443 ), #2303, .T. ) ; +#2219 = LINE ( 'NONE', #459, #4493 ) ; +#2220 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -32.40000000000000600, 35.00000000000000000 ) ) ; +#2221 = EDGE_CURVE ( 'NONE', #3217, #4052, #12, .T. ) ; +#2222 = VERTEX_POINT ( 'NONE', #1562 ) ; +#2223 = ORIENTED_EDGE ( 'NONE', *, *, #2854, .T. ) ; +#2224 = PLANE ( 'NONE', #3187 ) ; +#2225 = CIRCLE ( 'NONE', #4996, 1.250000000000001100 ) ; +#2226 = ORIENTED_EDGE ( 'NONE', *, *, #974, .F. ) ; +#2227 = AXIS2_PLACEMENT_3D ( 'NONE', #2946, #358, #3372 ) ; +#2228 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -24.99999999999997900, 68.75000000000001400 ) ) ; +#2229 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 0.8756939273366580700, 2.596526196703094100 ) ) ; +#2230 = LINE ( 'NONE', #2695, #5467 ) ; +#2231 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -20.50000000000000400, 1.257674520083185300E-015 ) ) ; +#2232 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2233 = FACE_OUTER_BOUND ( 'NONE', #977, .T. ) ; +#2234 = VECTOR ( 'NONE', #502, 1000.000000000000000 ) ; +#2235 = CARTESIAN_POINT ( 'NONE', ( 0.2522330730247281400, -9.987243147919505400, 76.09432346314797300 ) ) ; +#2236 = LINE ( 'NONE', #4910, #5473 ) ; +#2237 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995700, -7.459310946700267400E-015, 78.75000000000001400 ) ) ; +#2238 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 1.249999999999992200, 80.00000000000001400 ) ) ; +#2239 = VERTEX_POINT ( 'NONE', #3695 ) ; +#2240 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -8.673617379884035500E-017, 1.000000000000000000 ) ) ; +#2241 = EDGE_CURVE ( 'NONE', #708, #325, #1298, .T. ) ; +#2242 = VECTOR ( 'NONE', #4403, 1000.000000000000000 ) ; +#2243 = EDGE_CURVE ( 'NONE', #4740, #2943, #2175, .T. ) ; +#2244 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -30.00000000000000000, 80.00000000000000000 ) ) ; +#2245 = ADVANCED_FACE ( 'NONE', ( #3166 ), #886, .F. ) ; +#2246 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -35.00000000000000700, 58.79999999999999000 ) ) ; +#2247 = FACE_OUTER_BOUND ( 'NONE', #4405, .T. ) ; +#2248 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -35.00000000000000700, 55.50000000000000700 ) ) ; +#2249 = CARTESIAN_POINT ( 'NONE', ( 1.007459532398797200, -9.792038867297904400, 77.01249153920431900 ) ) ; +#2250 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884034200E-017 ) ) ; +#2251 = CIRCLE ( 'NONE', #1242, 2.500000000000002200 ) ; +#2252 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2253 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2254 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.940206225469880900, 10.46841981887819600 ) ) ; +#2255 = ORIENTED_EDGE ( 'NONE', *, *, #4620, .T. ) ; +#2256 = ORIENTED_EDGE ( 'NONE', *, *, #3821, .T. ) ; +#2257 = AXIS2_PLACEMENT_3D ( 'NONE', #5178, #2207, #1769 ) ; +#2258 = VERTEX_POINT ( 'NONE', #3730 ) ; +#2259 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 4.016768472668722700, 4.857839418287503500 ) ) ; +#2260 = CARTESIAN_POINT ( 'NONE', ( 34.97227934801624400, -9.645629774876420400, 75.37485200313477700 ) ) ; +#2261 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2262 = EDGE_LOOP ( 'NONE', ( #5200, #4807 ) ) ; +#2263 = AXIS2_PLACEMENT_3D ( 'NONE', #1844, #2292, #4427 ) ; +#2264 = ORIENTED_EDGE ( 'NONE', *, *, #4179, .F. ) ; +#2265 = DIRECTION ( 'NONE', ( 1.734723475976806800E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2266 = AXIS2_PLACEMENT_3D ( 'NONE', #2170, #1722, #1285 ) ; +#2267 = ORIENTED_EDGE ( 'NONE', *, *, #4647, .F. ) ; +#2268 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2269 = LINE ( 'NONE', #5317, #1118 ) ; +#2270 = ADVANCED_FACE ( 'NONE', ( #5412 ), #4180, .T. ) ; +#2271 = EDGE_LOOP ( 'NONE', ( #5144, #2346, #4674, #174, #4295, #4551 ) ) ; +#2272 = ORIENTED_EDGE ( 'NONE', *, *, #539, .F. ) ; +#2273 = EDGE_CURVE ( 'NONE', #4291, #2876, #5282, .T. ) ; +#2274 = ORIENTED_EDGE ( 'NONE', *, *, #1578, .T. ) ; +#2275 = EDGE_CURVE ( 'NONE', #5267, #3124, #4317, .T. ) ; +#2276 = CYLINDRICAL_SURFACE ( 'NONE', #619, 2.500000000000002200 ) ; +#2277 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999998600, -18.74999999999998200, 77.50000000000001400 ) ) ; +#2278 = EDGE_LOOP ( 'NONE', ( #4272, #4943, #2421 ) ) ; +#2279 = ORIENTED_EDGE ( 'NONE', *, *, #4721, .T. ) ; +#2280 = DIRECTION ( 'NONE', ( 1.224646799147276800E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2281 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #314, #4189, #1613, #4617, #2046, #5028, #2488, #5436, #2918, #332 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001065464361979389900, 0.002130928723958779900, 0.003196393085938169800, 0.004261857447917559800 ), + .UNSPECIFIED. ) ; +#2282 = ORIENTED_EDGE ( 'NONE', *, *, #2275, .F. ) ; +#2283 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000001400, 12.33041018004153800, 33.09054865481977700 ) ) ; +#2284 = ORIENTED_EDGE ( 'NONE', *, *, #2608, .T. ) ; +#2285 = FACE_OUTER_BOUND ( 'NONE', #1637, .T. ) ; +#2286 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 4.361336116764529300, 1.723337364046920900 ) ) ; +#2287 = EDGE_CURVE ( 'NONE', #3014, #1725, #2029, .T. ) ; +#2288 = ORIENTED_EDGE ( 'NONE', *, *, #5439, .F. ) ; +#2289 = ORIENTED_EDGE ( 'NONE', *, *, #4782, .F. ) ; +#2290 = TOROIDAL_SURFACE ( 'NONE', #187, 1.250000000000002200, 1.250000000000000000 ) ; +#2291 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.999999999999994700, 68.75000000000001400 ) ) ; +#2292 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2293 = CARTESIAN_POINT ( 'NONE', ( 1.776356839400259300E-014, 1.249999999999992700, 75.00000000000001400 ) ) ; +#2294 = VECTOR ( 'NONE', #2516, 1000.000000000000000 ) ; +#2295 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000001800, -15.00000000000000900, 77.50000000000001400 ) ) ; +#2296 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -15.43121245093975300, 11.12379794200893500 ) ) ; +#2297 = LINE ( 'NONE', #665, #1149 ) ; +#2298 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2299 = ADVANCED_FACE ( 'NONE', ( #3040 ), #2906, .F. ) ; +#2300 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959332000E-015, 2.833029787341124500, 0.7126278777861112500 ) ) ; +#2301 = CIRCLE ( 'NONE', #4800, 2.500000000000002200 ) ; +#2302 = AXIS2_PLACEMENT_3D ( 'NONE', #1525, #4531, #1962 ) ; +#2303 = TOROIDAL_SURFACE ( 'NONE', #4876, 1.250000000000002200, 1.250000000000000000 ) ; +#2304 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.673617379884035500E-017, -1.000000000000000000 ) ) ; +#2305 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2306 = CIRCLE ( 'NONE', #302, 1.250000000000001100 ) ; +#2307 = ORIENTED_EDGE ( 'NONE', *, *, #2051, .T. ) ; +#2308 = LINE ( 'NONE', #1414, #1163 ) ; +#2309 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2310 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -2.775557561562891400E-016, 1.000000000000000000 ) ) ; +#2311 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2312 = EDGE_CURVE ( 'NONE', #716, #3199, #4035, .T. ) ; +#2313 = EDGE_CURVE ( 'NONE', #4618, #2013, #5161, .T. ) ; +#2314 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2315 = LINE ( 'NONE', #949, #4459 ) ; +#2316 = PLANE ( 'NONE', #4164 ) ; +#2317 = EDGE_LOOP ( 'NONE', ( #1736, #4228, #4082, #5272 ) ) ; +#2318 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2319 = CARTESIAN_POINT ( 'NONE', ( 0.3678513576461581200, -15.00000000000000900, 76.30535135764617400 ) ) ; +#2320 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2321 = ADVANCED_FACE ( 'NONE', ( #5025 ), #1889, .T. ) ; +#2322 = EDGE_CURVE ( 'NONE', #3615, #4882, #741, .T. ) ; +#2323 = ORIENTED_EDGE ( 'NONE', *, *, #3961, .F. ) ; +#2324 = AXIS2_PLACEMENT_3D ( 'NONE', #5256, #2723, #137 ) ; +#2325 = VERTEX_POINT ( 'NONE', #2936 ) ; +#2326 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2327 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, 18.28184403566698200, 60.00000000000000700 ) ) ; +#2328 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891400E-016, -1.000000000000000000 ) ) ; +#2329 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9961946980917455500, -0.08715574274765870700 ) ) ; +#2330 = ORIENTED_EDGE ( 'NONE', *, *, #1744, .F. ) ; +#2331 = CARTESIAN_POINT ( 'NONE', ( 33.39999999999994200, 10.00000000000002000, 71.94000000000001200 ) ) ; +#2332 = VERTEX_POINT ( 'NONE', #1634 ) ; +#2333 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 7.741436883026829600, 11.24074852480253700 ) ) ; +#2334 = APPROVAL ( #808, 'UNSPECIFIED' ) ; +#2335 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 6.736790197968178700E-017, 1.000000000000000000 ) ) ; +#2336 = ORIENTED_EDGE ( 'NONE', *, *, #1407, .F. ) ; +#2337 = CIRCLE ( 'NONE', #4941, 1.250000000000000000 ) ; +#2338 = ORIENTED_EDGE ( 'NONE', *, *, #323, .T. ) ; +#2339 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2340 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -35.00000000000000000, 31.81000000000000600 ) ) ; +#2341 = ORIENTED_EDGE ( 'NONE', *, *, #1767, .T. ) ; +#2342 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995700, 5.000000000000024900, 78.75000000000001400 ) ) ; +#2343 = VERTEX_POINT ( 'NONE', #1226 ) ; +#2344 = VECTOR ( 'NONE', #5032, 1000.000000000000000 ) ; +#2345 = EDGE_CURVE ( 'NONE', #4880, #3329, #599, .T. ) ; +#2346 = ORIENTED_EDGE ( 'NONE', *, *, #476, .T. ) ; +#2347 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -15.43121245093975300, 11.12379794200893500 ) ) ; +#2348 = EDGE_CURVE ( 'NONE', #3466, #869, #2775, .T. ) ; +#2349 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 14.99999999999998600, 80.00000000000001400 ) ) ; +#2350 = ORIENTED_EDGE ( 'NONE', *, *, #2426, .F. ) ; +#2351 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2352 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1914, #5198, #3516, #2683, #4822, #2260, #4402, #5148, #128, #3135, #551, #3575 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0004578727004010626800, 0.0009157454008021253600, 0.001144681751002644700, 0.001373618101203164200, 0.001831490801604238600 ), + .UNSPECIFIED. ) ; +#2353 = LINE ( 'NONE', #3898, #2075 ) ; +#2354 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2355 = ADVANCED_FACE ( 'NONE', ( #3908 ), #478, .T. ) ; +#2356 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2357 = ORIENTED_EDGE ( 'NONE', *, *, #2677, .T. ) ; +#2358 = VERTEX_POINT ( 'NONE', #1672 ) ; +#2359 = CYLINDRICAL_SURFACE ( 'NONE', #4448, 1.199999999999999700 ) ; +#2360 = ORIENTED_EDGE ( 'NONE', *, *, #2053, .T. ) ; +#2361 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, -6.938893903907228400E-015, 75.00000000000001400 ) ) ; +#2362 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2363 = VECTOR ( 'NONE', #1411, 1000.000000000000000 ) ; +#2364 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -2.775557561562891400E-016 ) ) ; +#2365 = CIRCLE ( 'NONE', #1717, 1.200000000000006600 ) ; +#2366 = LINE ( 'NONE', #3502, #4511 ) ; +#2367 = CARTESIAN_POINT ( 'NONE', ( 34.98739403883844500, -15.44055859321209000, 75.28204086762073600 ) ) ; +#2368 = AXIS2_PLACEMENT_3D ( 'NONE', #618, #604, #596 ) ; +#2369 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2370 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891400E-016, -1.000000000000000000 ) ) ; +#2371 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2372 = AXIS2_PLACEMENT_3D ( 'NONE', #3763, #1198, #4199 ) ; +#2373 = VECTOR ( 'NONE', #3228, 1000.000000000000000 ) ; +#2374 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -25.50000000000000400, 42.49999999999999300 ) ) ; +#2375 = VERTEX_POINT ( 'NONE', #2111 ) ; +#2376 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -35.00000000000000700, 80.00000000000000000 ) ) ; +#2377 = AXIS2_PLACEMENT_3D ( 'NONE', #2862, #273, #3286 ) ; +#2378 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999997900, -15.00000000000000900, 76.25000000000001400 ) ) ; +#2379 = EDGE_CURVE ( 'NONE', #1386, #97, #1620, .T. ) ; +#2380 = ADVANCED_FACE ( 'NONE', ( #4907 ), #3631, .F. ) ; +#2381 = LINE ( 'NONE', #3255, #4527 ) ; +#2382 = EDGE_CURVE ( 'NONE', #2522, #462, #2647, .T. ) ; +#2383 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -35.00000000000000700, 77.50000000000000000 ) ) ; +#2384 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 15.00000000000000000, 36.45205550348067200 ) ) ; +#2385 = CARTESIAN_POINT ( 'NONE', ( -1.250000000000002000, 1.249999999999992500, 77.50000000000001400 ) ) ; +#2386 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.928593550334433700E-014, 2.500000000000000000 ) ) ; +#2387 = ORIENTED_EDGE ( 'NONE', *, *, #4606, .F. ) ; +#2388 = CARTESIAN_POINT ( 'NONE', ( -7.199102425303746900E-014, -7.500000000000009800, 77.50000000000001400 ) ) ; +#2389 = EDGE_CURVE ( 'NONE', #4698, #3468, #1513, .T. ) ; +#2390 = DIRECTION ( 'NONE', ( 5.510910596162833200E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2391 = ORIENTED_EDGE ( 'NONE', *, *, #3032, .F. ) ; +#2392 = ORIENTED_EDGE ( 'NONE', *, *, #5358, .F. ) ; +#2393 = ORIENTED_EDGE ( 'NONE', *, *, #432, .T. ) ; +#2394 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2395 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -6.250000000000008000, 80.00000000000001400 ) ) ; +#2396 = EDGE_LOOP ( 'NONE', ( #4425, #3071, #3288, #4041 ) ) ; +#2397 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -25.50000000000000400, 43.69999999999999600 ) ) ; +#2398 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2399 = ORIENTED_EDGE ( 'NONE', *, *, #531, .F. ) ; +#2400 = AXIS2_PLACEMENT_3D ( 'NONE', #962, #2265, #5234 ) ; +#2401 = LINE ( 'NONE', #5354, #4282 ) ; +#2402 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 10.70202200364634100, 21.15779857122085200 ) ) ; +#2403 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -30.00000000000001100, 72.50000000000001400 ) ) ; +#2404 = ORIENTED_EDGE ( 'NONE', *, *, #4139, .T. ) ; +#2405 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#2406 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -2.220446049250313400E-014, 80.00000000000001400 ) ) ; +#2407 = ORIENTED_EDGE ( 'NONE', *, *, #2275, .T. ) ; +#2408 = AXIS2_PLACEMENT_3D ( 'NONE', #4729, #2149, #4715 ) ; +#2409 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2410 = VERTEX_POINT ( 'NONE', #2177 ) ; +#2411 = FACE_OUTER_BOUND ( 'NONE', #5241, .T. ) ; +#2412 = ORIENTED_EDGE ( 'NONE', *, *, #1010, .F. ) ; +#2413 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2414 = ORIENTED_EDGE ( 'NONE', *, *, #7, .T. ) ; +#2415 = EDGE_LOOP ( 'NONE', ( #4669, #4744, #4812, #4988 ) ) ; +#2416 = ORIENTED_EDGE ( 'NONE', *, *, #431, .T. ) ; +#2417 = LINE ( 'NONE', #1037, #4563 ) ; +#2418 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9961946980917454300, -0.08715574274765869300 ) ) ; +#2419 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999994300, 10.00000000000002000, 67.55000000000002600 ) ) ; +#2420 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2421 = ORIENTED_EDGE ( 'NONE', *, *, #4217, .F. ) ; +#2422 = VERTEX_POINT ( 'NONE', #393 ) ; +#2423 = CIRCLE ( 'NONE', #4342, 2.500000000000002200 ) ; +#2424 = EDGE_CURVE ( 'NONE', #113, #1519, #2504, .T. ) ; +#2425 = CARTESIAN_POINT ( 'NONE', ( 0.08087788394594921900, -5.000000000000007100, 76.19307411316886200 ) ) ; +#2426 = EDGE_CURVE ( 'NONE', #448, #1919, #336, .T. ) ; +#2427 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 10.06934001222467000, 10.22699847220719100 ) ) ; +#2428 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -32.40000000000000600, 35.00000000000000000 ) ) ; +#2429 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2430 = VECTOR ( 'NONE', #3375, 1000.000000000000000 ) ; +#2431 = ORIENTED_EDGE ( 'NONE', *, *, #4747, .T. ) ; +#2432 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2433 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2434 = FACE_OUTER_BOUND ( 'NONE', #4202, .T. ) ; +#2435 = EDGE_CURVE ( 'NONE', #5123, #4618, #1360, .T. ) ; +#2436 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2437 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.110223024625157200E-014, 1.110223024625155600E-014 ) ) ; +#2438 = CARTESIAN_POINT ( 'NONE', ( -1.530808498933859800E-016, 3.750000000000000900, 77.50000000000001400 ) ) ; +#2439 = CYLINDRICAL_SURFACE ( 'NONE', #379, 2.499999999999988500 ) ; +#2440 = AXIS2_PLACEMENT_3D ( 'NONE', #5060, #2543, #5486 ) ; +#2441 = LINE ( 'NONE', #685, #136 ) ; +#2442 = CIRCLE ( 'NONE', #4452, 2.500000000000002200 ) ; +#2443 = AXIS2_PLACEMENT_3D ( 'NONE', #1129, #606, #4963 ) ; +#2444 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 6.874777595185751300, 4.397346737523355000 ) ) ; +#2445 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.387778780781444500E-015, 0.0000000000000000000 ) ) ; +#2446 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2447 = CARTESIAN_POINT ( 'NONE', ( -1.250000000000001300, -5.000000000000006200, 77.50000000000001400 ) ) ; +#2448 = ORIENTED_EDGE ( 'NONE', *, *, #175, .F. ) ; +#2449 = AXIS2_PLACEMENT_3D ( 'NONE', #4603, #2037, #5017 ) ; +#2450 = CARTESIAN_POINT ( 'NONE', ( 1.419939224924670700, -5.436334224685270800, 77.25998063544321300 ) ) ; +#2451 = CIRCLE ( 'NONE', #338, 1.199999999999999700 ) ; +#2452 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.49999999999999500, 40.00000000000001400 ) ) ; +#2453 = CIRCLE ( 'NONE', #4414, 1.199999999999992600 ) ; +#2454 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.734723475976806800E-016, 4.814824860968089100E-032 ) ) ; +#2455 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, 9.999999999999994700, 65.56000000000001600 ) ) ; +#2456 = EDGE_CURVE ( 'NONE', #2067, #2814, #4648, .T. ) ; +#2457 = EDGE_CURVE ( 'NONE', #462, #2239, #3506, .T. ) ; +#2458 = ORIENTED_EDGE ( 'NONE', *, *, #4462, .F. ) ; +#2459 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -8.673617379884035500E-017, 1.000000000000000000 ) ) ; +#2460 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 2.244453764417106500, 3.265706359065728900 ) ) ; +#2461 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2462 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995000, 3.750000000000024900, 76.25000000000001400 ) ) ; +#2463 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -35.00000000000000700, 55.00000000000000700 ) ) ; +#2464 = VERTEX_POINT ( 'NONE', #3459 ) ; +#2465 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.673617379884035500E-017, -1.000000000000000000 ) ) ; +#2466 = ORIENTED_EDGE ( 'NONE', *, *, #1982, .T. ) ; +#2467 = CARTESIAN_POINT ( 'NONE', ( 34.71902986846231400, 0.004088079873769696900, 76.15467740287073200 ) ) ; +#2468 = ORIENTED_EDGE ( 'NONE', *, *, #5174, .T. ) ; +#2469 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2470 = ORIENTED_EDGE ( 'NONE', *, *, #3239, .T. ) ; +#2471 = CARTESIAN_POINT ( 'NONE', ( -0.0004379111663650395600, -9.058615250669930700, 75.02911346620030000 ) ) ; +#2472 = VERTEX_POINT ( 'NONE', #1341 ) ; +#2473 = VERTEX_POINT ( 'NONE', #4345 ) ; +#2474 = AXIS2_PLACEMENT_3D ( 'NONE', #2778, #2768, #2727 ) ; +#2475 = FACE_OUTER_BOUND ( 'NONE', #3990, .T. ) ; +#2476 = ORIENTED_EDGE ( 'NONE', *, *, #3281, .F. ) ; +#2477 = AXIS2_PLACEMENT_3D ( 'NONE', #69, #4378, #1796 ) ; +#2478 = ORIENTED_EDGE ( 'NONE', *, *, #1225, .T. ) ; +#2479 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 1.878278871390846300, 0.3053556175822440000 ) ) ; +#2480 = ORIENTED_EDGE ( 'NONE', *, *, #1835, .T. ) ; +#2481 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.982541115402065100E-016, -1.000000000000000000 ) ) ; +#2482 = VECTOR ( 'NONE', #2540, 1000.000000000000100 ) ; +#2483 = AXIS2_PLACEMENT_3D ( 'NONE', #4232, #354, #1243 ) ; +#2484 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995700, 1.647987302177958200E-014, 77.50000000000001400 ) ) ; +#2485 = ORIENTED_EDGE ( 'NONE', *, *, #499, .F. ) ; +#2486 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 12.33032449981898000, 33.09234086738578600 ) ) ; +#2487 = EDGE_LOOP ( 'NONE', ( #1543, #2605, #337, #3216 ) ) ; +#2488 = CARTESIAN_POINT ( 'NONE', ( 34.92224777120618000, 13.13028869250946300, 69.46135650822977000 ) ) ; +#2489 = VERTEX_POINT ( 'NONE', #57 ) ; +#2490 = VECTOR ( 'NONE', #3409, 1000.000000000000000 ) ; +#2491 = ORIENTED_EDGE ( 'NONE', *, *, #1124, .T. ) ; +#2492 = CARTESIAN_POINT ( 'NONE', ( -1.083335593717819700E-031, 12.50000000000000000, 36.53453371335473300 ) ) ; +#2493 = CIRCLE ( 'NONE', #3584, 1.250000000000002200 ) ; +#2494 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2495 = EDGE_CURVE ( 'NONE', #716, #4929, #4773, .T. ) ; +#2496 = VECTOR ( 'NONE', #2599, 1000.000000000000000 ) ; +#2497 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2498 = EDGE_CURVE ( 'NONE', #4946, #3067, #2366, .T. ) ; +#2499 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 5.932754302729931300E-014, 0.0000000000000000000 ) ) ; +#2500 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2501 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 14.99999999999999300, 80.00000000000001400 ) ) ; +#2502 = ADVANCED_FACE ( 'NONE', ( #1219 ), #5471, .T. ) ; +#2503 = LINE ( 'NONE', #4509, #199 ) ; +#2504 = LINE ( 'NONE', #4734, #200 ) ; +#2505 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -30.00000000000001100, 80.00000000000000000 ) ) ; +#2506 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 12.55077312466986000, 18.07074812165328100 ) ) ; +#2507 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#2508 = FACE_OUTER_BOUND ( 'NONE', #3345, .T. ) ; +#2509 = EDGE_CURVE ( 'NONE', #1725, #469, #3371, .T. ) ; +#2510 = ORIENTED_EDGE ( 'NONE', *, *, #359, .T. ) ; +#2511 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412800E-015, 6.257410732793651700, 8.118878134212018000 ) ) ; +#2512 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2513 = AXIS2_PLACEMENT_3D ( 'NONE', #772, #751, #4630 ) ; +#2514 = VECTOR ( 'NONE', #3446, 1000.000000000000000 ) ; +#2515 = AXIS2_PLACEMENT_3D ( 'NONE', #2007, #4577, #1571 ) ; +#2516 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 8.673617379884035500E-017, -1.000000000000000000 ) ) ; +#2517 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999997200, -9.999999999999987600, 77.50000000000001400 ) ) ; +#2518 = VECTOR ( 'NONE', #3682, 1000.000000000000000 ) ; +#2519 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.673617379884035500E-017, -1.000000000000000000 ) ) ; +#2520 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000002100, 6.637326623156004900, 4.119235866183749400 ) ) ; +#2521 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 6.736790197968178700E-017, 1.000000000000000000 ) ) ; +#2522 = VERTEX_POINT ( 'NONE', #74 ) ; +#2523 = CARTESIAN_POINT ( 'NONE', ( 2.296212748401168500E-015, -16.25000000000000700, 77.50000000000001400 ) ) ; +#2524 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2525 = ADVANCED_FACE ( 'NONE', ( #73 ), #948, .F. ) ; +#2526 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412800E-015, 1.081358013146583000, 2.678217011636930200 ) ) ; +#2527 = ORIENTED_EDGE ( 'NONE', *, *, #750, .T. ) ; +#2528 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #5068 ) ; +#2529 = EDGE_CURVE ( 'NONE', #5464, #1881, #2095, .T. ) ; +#2530 = VERTEX_POINT ( 'NONE', #4385 ) ; +#2531 = EDGE_LOOP ( 'NONE', ( #228, #714, #640, #2458, #4371 ) ) ; +#2532 = EDGE_CURVE ( 'NONE', #2669, #3625, #327, .T. ) ; +#2533 = ORIENTED_EDGE ( 'NONE', *, *, #2021, .T. ) ; +#2534 = DATE_AND_TIME ( #3659, #4801 ) ; +#2535 = CARTESIAN_POINT ( 'NONE', ( -9.341026746681397100E-015, 5.000000000000000000, 78.75000000000001400 ) ) ; +#2536 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2537 = ORIENTED_EDGE ( 'NONE', *, *, #2098, .T. ) ; +#2538 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -35.00000000000000000, 38.19000000000000500 ) ) ; +#2539 = ORIENTED_EDGE ( 'NONE', *, *, #4817, .T. ) ; +#2540 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9961946980917454300, 0.08715574274765867900 ) ) ; +#2541 = CIRCLE ( 'NONE', #3979, 1.200000000000006600 ) ; +#2542 = VERTEX_POINT ( 'NONE', #127 ) ; +#2543 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891400E-016, -1.000000000000000000 ) ) ; +#2544 = EDGE_CURVE ( 'NONE', #1597, #3448, #4247, .T. ) ; +#2545 = ORIENTED_EDGE ( 'NONE', *, *, #1735, .T. ) ; +#2546 = AXIS2_PLACEMENT_3D ( 'NONE', #5306, #2783, #189 ) ; +#2547 = VERTEX_POINT ( 'NONE', #2244 ) ; +#2548 = TOROIDAL_SURFACE ( 'NONE', #5036, 1.250000000000002200, 1.250000000000000000 ) ; +#2549 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#2550 = ORIENTED_EDGE ( 'NONE', *, *, #2137, .T. ) ; +#2551 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 14.80208583494073700, 32.43904171737467800 ) ) ; +#2552 = APPROVAL_ROLE ( '' ) ; +#2553 = VERTEX_POINT ( 'NONE', #549 ) ; +#2554 = ORIENTED_EDGE ( 'NONE', *, *, #3064, .T. ) ; +#2555 = CIRCLE ( 'NONE', #3257, 1.250000000000000200 ) ; +#2556 = AXIS2_PLACEMENT_3D ( 'NONE', #147, #3162, #574 ) ; +#2557 = CARTESIAN_POINT ( 'NONE', ( 0.07608053672174156000, -5.171106471128558400, 75.61591454212160100 ) ) ; +#2558 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2559 = CARTESIAN_POINT ( 'NONE', ( 32.59081432856977800, -8.190007421839082400, 77.49861212917967600 ) ) ; +#2560 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#2561 = ORIENTED_EDGE ( 'NONE', *, *, #1420, .T. ) ; +#2562 = ORIENTED_EDGE ( 'NONE', *, *, #2456, .F. ) ; +#2563 = ADVANCED_FACE ( 'NONE', ( #3235 ), #5221, .T. ) ; +#2564 = CIRCLE ( 'NONE', #4625, 1.250000000000001100 ) ; +#2565 = AXIS2_PLACEMENT_3D ( 'NONE', #1819, #4811, #5227 ) ; +#2566 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 7.625158136161789500E-017 ) ) ; +#2567 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#2568 = APPROVAL_DATE_TIME ( #3690, #4350 ) ; +#2569 = EDGE_CURVE ( 'NONE', #4750, #4792, #1961, .T. ) ; +#2570 = EDGE_CURVE ( 'NONE', #5385, #5506, #809, .T. ) ; +#2571 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000004000, 3.185330198787792400, 0.8951832464749515100 ) ) ; +#2572 = CARTESIAN_POINT ( 'NONE', ( -9.157061584756545200E-014, 6.878258497486567300, 4.442897651596696000 ) ) ; +#2573 = FACE_OUTER_BOUND ( 'NONE', #2278, .T. ) ; +#2574 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.00000000000000000, 68.75000000000001400 ) ) ; +#2575 = CYLINDRICAL_SURFACE ( 'NONE', #5349, 1.199999999999992600 ) ; +#2576 = EDGE_CURVE ( 'NONE', #3724, #2012, #4108, .T. ) ; +#2577 = LINE ( 'NONE', #5353, #1425 ) ; +#2578 = CARTESIAN_POINT ( 'NONE', ( 34.67141365310003200, -9.979500108835782900, 76.25115493899821200 ) ) ; +#2579 = PLANE ( 'NONE', #3909 ) ; +#2580 = CARTESIAN_POINT ( 'NONE', ( 36.24999999999997200, -8.749999999999987600, 77.50000000000001400 ) ) ; +#2581 = FACE_OUTER_BOUND ( 'NONE', #1651, .T. ) ; +#2582 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.50000000000000400, 42.49999999999999300 ) ) ; +#2583 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#2584 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 10.00000000000002000, 67.55000000000002600 ) ) ; +#2585 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.387778780781444500E-015, 0.0000000000000000000 ) ) ; +#2586 = EDGE_LOOP ( 'NONE', ( #2391, #46, #387, #4605 ) ) ; +#2587 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2588 = TOROIDAL_SURFACE ( 'NONE', #56, 1.250000000000002200, 1.250000000000000000 ) ; +#2589 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 11.36623845417515200, 13.87199741051510300 ) ) ; +#2590 = ADVANCED_FACE ( 'NONE', ( #5343 ), #2837, .T. ) ; +#2591 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -12.55080000000000200, 67.00000000000001400 ) ) ; +#2592 = AXIS2_PLACEMENT_3D ( 'NONE', #686, #2864, #278 ) ; +#2593 = VECTOR ( 'NONE', #1827, 1000.000000000000000 ) ; +#2594 = AXIS2_PLACEMENT_3D ( 'NONE', #3801, #2362, #2318 ) ; +#2595 = CARTESIAN_POINT ( 'NONE', ( 33.99254046760129500, -5.207961132702076100, 77.01249153920426200 ) ) ; +#2596 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -2.449200000000006500, 15.49999999999998400 ) ) ; +#2597 = ORIENTED_EDGE ( 'NONE', *, *, #1990, .F. ) ; +#2598 = EDGE_LOOP ( 'NONE', ( #4074, #3595 ) ) ; +#2599 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 7.625158136161789500E-017, -1.000000000000000000 ) ) ; +#2600 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -14.99100622546988300, 21.20617812313072300 ) ) ; +#2601 = CARTESIAN_POINT ( 'NONE', ( 0.0003378909266904950400, -15.90723057939071000, 75.04481179894077100 ) ) ; +#2602 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2603 = ORIENTED_EDGE ( 'NONE', *, *, #4404, .F. ) ; +#2604 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -35.00000000000000000, 0.0000000000000000000 ) ) ; +#2605 = ORIENTED_EDGE ( 'NONE', *, *, #1086, .T. ) ; +#2606 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999998600, -18.74999999999998200, 77.50000000000001400 ) ) ; +#2607 = ORIENTED_EDGE ( 'NONE', *, *, #5498, .F. ) ; +#2608 = EDGE_CURVE ( 'NONE', #2888, #2542, #5092, .T. ) ; +#2609 = EDGE_CURVE ( 'NONE', #3078, #1919, #3965, .T. ) ; +#2610 = FACE_BOUND ( 'NONE', #4421, .T. ) ; +#2611 = ORIENTED_EDGE ( 'NONE', *, *, #2786, .F. ) ; +#2612 = ORIENTED_EDGE ( 'NONE', *, *, #5319, .F. ) ; +#2613 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -32.50000000000000000, 10.00000000000000500 ) ) ; +#2614 = LINE ( 'NONE', #361, #4749 ) ; +#2615 = ADVANCED_FACE ( 'NONE', ( #1686 ), #1551, .T. ) ; +#2616 = VERTEX_POINT ( 'NONE', #4895 ) ; +#2617 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2235, #3522, #4393, #1813, #4804, #2249, #5222, #2689, #95, #3102, #527, #3539, #963, #3966, #1403, #4407, #1825, #4828 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.001127151740952765100, 0.001648484797538343100, 0.002169817854123921000, 0.002691150910709498900, 0.003212483967295077300, 0.003733817023880655700, 0.004255150080466234400, 0.004776483137051813200, 0.005297816193637392000 ), + .UNSPECIFIED. ) ; +#2618 = VERTEX_POINT ( 'NONE', #2331 ) ; +#2619 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2620 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.49999999999999300, 66.76856112887630000 ) ) ; +#2621 = ORIENTED_EDGE ( 'NONE', *, *, #1347, .T. ) ; +#2622 = EDGE_CURVE ( 'NONE', #2343, #20, #668, .T. ) ; +#2623 = FACE_OUTER_BOUND ( 'NONE', #5248, .T. ) ; +#2624 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2625 = ORIENTED_EDGE ( 'NONE', *, *, #204, .T. ) ; +#2626 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#2627 = EDGE_LOOP ( 'NONE', ( #1180, #2350 ) ) ; +#2628 = ORIENTED_EDGE ( 'NONE', *, *, #3169, .F. ) ; +#2629 = ORIENTED_EDGE ( 'NONE', *, *, #5271, .T. ) ; +#2630 = CIRCLE ( 'NONE', #2797, 2.500000000000000000 ) ; +#2631 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.940206225469882600, 10.46841981887819600 ) ) ; +#2632 = AXIS2_PLACEMENT_3D ( 'NONE', #3905, #485, #3058 ) ; +#2633 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 15.00000000000000500, 16.56854249492381100 ) ) ; +#2634 = ORIENTED_EDGE ( 'NONE', *, *, #3599, .T. ) ; +#2635 = CC_DESIGN_APPROVAL ( #2334, ( #2044 ) ) ; +#2636 = FACE_OUTER_BOUND ( 'NONE', #214, .T. ) ; +#2637 = ORIENTED_EDGE ( 'NONE', *, *, #1953, .F. ) ; +#2638 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -25.50000000000000400, 26.19999999999999900 ) ) ; +#2639 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2640 = FACE_OUTER_BOUND ( 'NONE', #2586, .T. ) ; +#2641 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#2642 = CARTESIAN_POINT ( 'NONE', ( -1.530808498933859800E-016, 3.750000000000000900, 77.50000000000001400 ) ) ; +#2643 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -23.00000000000000400, 2.500000000000000000 ) ) ; +#2644 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2645 = LINE ( 'NONE', #4115, #3767 ) ; +#2646 = EDGE_CURVE ( 'NONE', #3092, #3573, #4964, .T. ) ; +#2647 = LINE ( 'NONE', #1270, #3768 ) ; +#2648 = EDGE_CURVE ( 'NONE', #1025, #2697, #2706, .T. ) ; +#2649 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2650 = ADVANCED_FACE ( 'NONE', ( #2573 ), #264, .T. ) ; +#2651 = FACE_BOUND ( 'NONE', #3055, .T. ) ; +#2652 = VERTEX_POINT ( 'NONE', #620 ) ; +#2653 = DESIGN_CONTEXT ( 'detailed design', #5068, 'design' ) ; +#2654 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.734723475976807100E-016, 0.0000000000000000000 ) ) ; +#2655 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2656 = FACE_BOUND ( 'NONE', #4622, .T. ) ; +#2657 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -14.99100622546988300, 16.15537812313072400 ) ) ; +#2658 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2659 = CARTESIAN_POINT ( 'NONE', ( 1.836970198720964100E-015, -5.000000000000006200, 77.50000000000001400 ) ) ; +#2660 = CIRCLE ( 'NONE', #4589, 5.050799999999994400 ) ; +#2661 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -30.00000000000000400, 10.00000000000000500 ) ) ; +#2662 = AXIS2_PLACEMENT_3D ( 'NONE', #896, #777, #757 ) ; +#2663 = ORIENTED_EDGE ( 'NONE', *, *, #5093, .F. ) ; +#2664 = CARTESIAN_POINT ( 'NONE', ( -6.755812637858007200E-013, 0.8052605685111808900, 1.564309850984614900E-008 ) ) ; +#2665 = AXIS2_PLACEMENT_3D ( 'NONE', #1159, #2461, #1570 ) ; +#2666 = EDGE_LOOP ( 'NONE', ( #2672, #1383, #5379, #5513 ) ) ; +#2667 = AXIS2_PLACEMENT_3D ( 'NONE', #1125, #4129, #1557 ) ; +#2668 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999998600, -6.249999999999982200, 78.75000000000001400 ) ) ; +#2669 = VERTEX_POINT ( 'NONE', #1071 ) ; +#2670 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -2.449200000000003800, 67.00000000000001400 ) ) ; +#2671 = ADVANCED_FACE ( 'NONE', ( #407 ), #3572, .F. ) ; +#2672 = ORIENTED_EDGE ( 'NONE', *, *, #5330, .T. ) ; +#2673 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -30.00000000000001100, 72.00000000000001400 ) ) ; +#2674 = EDGE_CURVE ( 'NONE', #1413, #5079, #4712, .T. ) ; +#2675 = PERSON_AND_ORGANIZATION ( #5121, #5438 ) ; +#2676 = ORIENTED_EDGE ( 'NONE', *, *, #5428, .F. ) ; +#2677 = EDGE_CURVE ( 'NONE', #241, #3287, #1421, .T. ) ; +#2678 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -32.40000000000000600, 31.81000000000000600 ) ) ; +#2679 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 5.928593550334433700E-014, 0.0000000000000000000 ) ) ; +#2680 = FACE_BOUND ( 'NONE', #2924, .T. ) ; +#2681 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 5.928593550334433700E-014, 2.500000000000000000 ) ) ; +#2682 = ORIENTED_EDGE ( 'NONE', *, *, #3991, .F. ) ; +#2683 = CARTESIAN_POINT ( 'NONE', ( 34.99673515794111700, -9.343693616524522100, 75.13925550853815600 ) ) ; +#2684 = ORIENTED_EDGE ( 'NONE', *, *, #4904, .F. ) ; +#2685 = EDGE_CURVE ( 'NONE', #3223, #2012, #3835, .T. ) ; +#2686 = VERTEX_POINT ( 'NONE', #5331 ) ; +#2687 = CIRCLE ( 'NONE', #4483, 2.500000000000002200 ) ; +#2688 = ORIENTED_EDGE ( 'NONE', *, *, #2890, .F. ) ; +#2689 = CARTESIAN_POINT ( 'NONE', ( 1.415100134138053600, -9.566923569514262500, 77.25762977529781500 ) ) ; +#2690 = ORIENTED_EDGE ( 'NONE', *, *, #539, .T. ) ; +#2691 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -5.000000000000006200, 78.75000000000001400 ) ) ; +#2692 = EDGE_LOOP ( 'NONE', ( #2223, #3351, #1126, #5381 ) ) ; +#2693 = VECTOR ( 'NONE', #5251, 1000.000000000000000 ) ; +#2694 = AXIS2_PLACEMENT_3D ( 'NONE', #2523, #2433, #2398 ) ; +#2695 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -6.591949208711870900E-015, 77.50000000000001400 ) ) ; +#2696 = ORIENTED_EDGE ( 'NONE', *, *, #883, .T. ) ; +#2697 = VERTEX_POINT ( 'NONE', #4924 ) ; +#2698 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.220446049250313400E-014, 80.00000000000001400 ) ) ; +#2699 = CIRCLE ( 'NONE', #3758, 5.050799999999994400 ) ; +#2700 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -13.55080000000001000, 22.10328947826994300 ) ) ; +#2701 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, 5.338211715215954300, 6.589322413601012200 ) ) ; +#2702 = ADVANCED_FACE ( 'NONE', ( #2434 ), #3435, .T. ) ; +#2703 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2704 = VECTOR ( 'NONE', #2369, 1000.000000000000000 ) ; +#2705 = AXIS2_PLACEMENT_3D ( 'NONE', #1689, #4264, #1262 ) ; +#2706 = LINE ( 'NONE', #4485, #4838 ) ; +#2707 = TOROIDAL_SURFACE ( 'NONE', #664, 1.250000000000002200, 1.250000000000000000 ) ; +#2708 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.387778780781442500E-015, 0.0000000000000000000 ) ) ; +#2709 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 1.249999999999987100, 80.00000000000001400 ) ) ; +#2710 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -30.00000000000000400, -2.602085213965211000E-015 ) ) ; +#2711 = EDGE_CURVE ( 'NONE', #2820, #4390, #2297, .T. ) ; +#2712 = FACE_OUTER_BOUND ( 'NONE', #3137, .T. ) ; +#2713 = EDGE_CURVE ( 'NONE', #5449, #4552, #4573, .T. ) ; +#2714 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 12.49999999999999500, 40.00000000000001400 ) ) ; +#2715 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 2.786094229557174000, 3.665689829324782200 ) ) ; +#2716 = VERTEX_POINT ( 'NONE', #4113 ) ; +#2717 = CIRCLE ( 'NONE', #4195, 5.050799999999999700 ) ; +#2718 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2719 = ADVANCED_FACE ( 'NONE', ( #8 ), #1014, .F. ) ; +#2720 = VECTOR ( 'NONE', #1847, 1000.000000000000000 ) ; +#2721 = EDGE_CURVE ( 'NONE', #1366, #2813, #2169, .T. ) ; +#2722 = AXIS2_PLACEMENT_3D ( 'NONE', #3005, #428, #3440 ) ; +#2723 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2724 = PLANE ( 'NONE', #3693 ) ; +#2725 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995700, -14.99999999999998400, 75.00000000000001400 ) ) ; +#2726 = VERTEX_POINT ( 'NONE', #680 ) ; +#2727 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2728 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 2.535678982106103900, 0.5658854904612938800 ) ) ; +#2729 = ORIENTED_EDGE ( 'NONE', *, *, #1275, .F. ) ; +#2730 = AXIS2_PLACEMENT_3D ( 'NONE', #279, #1577, #5410 ) ; +#2731 = VERTEX_POINT ( 'NONE', #2845 ) ; +#2732 = CARTESIAN_POINT ( 'NONE', ( 1.071565949253891500E-015, -6.250000000000006200, 77.50000000000001400 ) ) ; +#2733 = ORIENTED_EDGE ( 'NONE', *, *, #35, .F. ) ; +#2734 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.224646799147275600E-016, 0.0000000000000000000 ) ) ; +#2735 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2736 = VECTOR ( 'NONE', #1188, 1000.000000000000000 ) ; +#2737 = ORIENTED_EDGE ( 'NONE', *, *, #2221, .F. ) ; +#2738 = VERTEX_POINT ( 'NONE', #3264 ) ; +#2739 = EDGE_CURVE ( 'NONE', #4470, #817, #4444, .T. ) ; +#2740 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -7.625158136161789500E-017 ) ) ; +#2741 = EDGE_CURVE ( 'NONE', #4604, #4556, #3837, .T. ) ; +#2742 = CIRCLE ( 'NONE', #2372, 1.199999999999992600 ) ; +#2743 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -15.00000000000000900, 75.00000000000001400 ) ) ; +#2744 = EDGE_LOOP ( 'NONE', ( #630, #4468, #629, #1942 ) ) ; +#2745 = VERTEX_POINT ( 'NONE', #1590 ) ; +#2746 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -29.99999999999999300, -1.387778780781445700E-014 ) ) ; +#2747 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#2748 = ORIENTED_EDGE ( 'NONE', *, *, #4921, .F. ) ; +#2749 = ORIENTED_EDGE ( 'NONE', *, *, #2890, .T. ) ; +#2750 = ADVANCED_FACE ( 'NONE', ( #4313 ), #4172, .T. ) ; +#2751 = FACE_BOUND ( 'NONE', #3793, .T. ) ; +#2752 = ORIENTED_EDGE ( 'NONE', *, *, #1124, .F. ) ; +#2753 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 7.444133281890614700, 5.262782998785949600 ) ) ; +#2754 = ORIENTED_EDGE ( 'NONE', *, *, #5391, .T. ) ; +#2755 = VERTEX_POINT ( 'NONE', #311 ) ; +#2756 = ORIENTED_EDGE ( 'NONE', *, *, #2021, .F. ) ; +#2757 = LINE ( 'NONE', #1659, #4892 ) ; +#2758 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2759 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, -35.00000000000000700, 55.50000000000000700 ) ) ; +#2760 = DIRECTION ( 'NONE', ( 1.734723475976807100E-016, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2761 = ORIENTED_EDGE ( 'NONE', *, *, #4267, .F. ) ; +#2762 = CIRCLE ( 'NONE', #3010, 1.250000000000001100 ) ; +#2763 = CARTESIAN_POINT ( 'NONE', ( 33.39999999999999100, -24.99999999999997900, 69.95000000000001700 ) ) ; +#2764 = AXIS2_PLACEMENT_3D ( 'NONE', #3008, #3104, #2986 ) ; +#2765 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2766 = PLANE ( 'NONE', #3622 ) ; +#2767 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -5.000000000000006200, 76.25000000000001400 ) ) ; +#2768 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2769 = AXIS2_PLACEMENT_3D ( 'NONE', #4890, #2328, #5293 ) ; +#2770 = VECTOR ( 'NONE', #4654, 1000.000000000000000 ) ; +#2771 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2772 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2773 = CIRCLE ( 'NONE', #271, 2.500000000000000000 ) ; +#2774 = AXIS2_PLACEMENT_3D ( 'NONE', #1323, #4326, #1750 ) ; +#2775 = CIRCLE ( 'NONE', #1900, 3.189999999999998600 ) ; +#2776 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.220446049250313400E-014, 80.00000000000001400 ) ) ; +#2777 = FACE_BOUND ( 'NONE', #969, .T. ) ; +#2778 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -32.40000000000000600, 35.00000000000000000 ) ) ; +#2779 = ADVANCED_FACE ( 'NONE', ( #3161 ), #878, .F. ) ; +#2780 = EDGE_LOOP ( 'NONE', ( #4742, #2064, #3945, #4409, #3676, #5526 ) ) ; +#2781 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -13.55080000000001000, 22.10328947826994300 ) ) ; +#2782 = CIRCLE ( 'NONE', #5214, 3.189999999999998600 ) ; +#2783 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2784 = CARTESIAN_POINT ( 'NONE', ( 13.00000000000000200, -30.00000000000001100, 72.00000000000001400 ) ) ; +#2785 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, -35.00100000000001900, 55.50000000000000700 ) ) ; +#2786 = EDGE_CURVE ( 'NONE', #2542, #1925, #1293, .T. ) ; +#2787 = EDGE_CURVE ( 'NONE', #1515, #2197, #2023, .T. ) ; +#2788 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -23.00000000000000400, 2.500000000000000000 ) ) ; +#2789 = VECTOR ( 'NONE', #4026, 1000.000000000000000 ) ; +#2790 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -35.00100000000001900, 72.50000000000001400 ) ) ; +#2791 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2792 = VERTEX_POINT ( 'NONE', #3744 ) ; +#2793 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.734723475976808100E-016, 0.0000000000000000000 ) ) ; +#2794 = CARTESIAN_POINT ( 'NONE', ( 13.00000000000000200, -35.00100000000001900, 72.00000000000001400 ) ) ; +#2795 = EDGE_CURVE ( 'NONE', #869, #4664, #1886, .T. ) ; +#2796 = ORIENTED_EDGE ( 'NONE', *, *, #4981, .F. ) ; +#2797 = AXIS2_PLACEMENT_3D ( 'NONE', #378, #3389, #812 ) ; +#2798 = ORIENTED_EDGE ( 'NONE', *, *, #3095, .T. ) ; +#2799 = CARTESIAN_POINT ( 'NONE', ( 34.99920356183919500, -15.82238829183707900, 75.07222696916167600 ) ) ; +#2800 = ORIENTED_EDGE ( 'NONE', *, *, #1623, .T. ) ; +#2801 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#2802 = EDGE_LOOP ( 'NONE', ( #318, #3732, #2752, #2807 ) ) ; +#2803 = AXIS2_PLACEMENT_3D ( 'NONE', #4005, #1012, #3587 ) ; +#2804 = LOCAL_TIME ( 17, 42, 40.00000000000000000, #3932 ) ; +#2805 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -30.00000000000001100, 80.00000000000000000 ) ) ; +#2806 = ADVANCED_FACE ( 'NONE', ( #5277 ), #4028, .T. ) ; +#2807 = ORIENTED_EDGE ( 'NONE', *, *, #1800, .F. ) ; +#2808 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.50000000000000400, 43.69999999999999600 ) ) ; +#2809 = CYLINDRICAL_SURFACE ( 'NONE', #1971, 5.050800000000001500 ) ; +#2810 = ORIENTED_EDGE ( 'NONE', *, *, #3366, .T. ) ; +#2811 = PLANE ( 'NONE', #4013 ) ; +#2812 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.500000000000008000, 15.49999999999998600 ) ) ; +#2813 = VERTEX_POINT ( 'NONE', #2061 ) ; +#2814 = VERTEX_POINT ( 'NONE', #5042 ) ; +#2815 = FACE_OUTER_BOUND ( 'NONE', #4356, .T. ) ; +#2816 = EDGE_CURVE ( 'NONE', #2716, #2193, #2900, .T. ) ; +#2817 = ORIENTED_EDGE ( 'NONE', *, *, #4748, .F. ) ; +#2818 = EDGE_CURVE ( 'NONE', #4882, #3615, #3037, .T. ) ; +#2819 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 14.82657296140613400, 32.92493926239820500 ) ) ; +#2820 = VERTEX_POINT ( 'NONE', #5452 ) ; +#2821 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2822 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2823 = FACE_OUTER_BOUND ( 'NONE', #1394, .T. ) ; +#2824 = VERTEX_POINT ( 'NONE', #2505 ) ; +#2825 = CARTESIAN_POINT ( 'NONE', ( 34.74776692697534500, -5.012756852080509700, 76.09432346314783000 ) ) ; +#2826 = ORIENTED_EDGE ( 'NONE', *, *, #1926, .F. ) ; +#2827 = VERTEX_POINT ( 'NONE', #3338 ) ; +#2828 = LINE ( 'NONE', #4521, #4706 ) ; +#2829 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2830 = EDGE_CURVE ( 'NONE', #1609, #2980, #595, .T. ) ; +#2831 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.734723475976807100E-016, 0.0000000000000000000 ) ) ; +#2832 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.940206225469880900, 10.46841981887819600 ) ) ; +#2833 = FACE_OUTER_BOUND ( 'NONE', #5050, .T. ) ; +#2834 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.999999999999994700, 68.75000000000001400 ) ) ; +#2835 = DIRECTION ( 'NONE', ( 6.982962677686266700E-015, 8.551662891793383000E-031, -1.000000000000000000 ) ) ; +#2836 = AXIS2_PLACEMENT_3D ( 'NONE', #3183, #602, #3617 ) ; +#2837 = CYLINDRICAL_SURFACE ( 'NONE', #346, 2.500000000000000000 ) ; +#2838 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2839 = AXIS2_PLACEMENT_3D ( 'NONE', #490, #3503, #5217 ) ; +#2840 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 13.15129256185740300, 20.65273868800638400 ) ) ; +#2841 = CARTESIAN_POINT ( 'NONE', ( 36.24999999999998600, -19.99999999999998200, 77.50000000000001400 ) ) ; +#2842 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -35.00000000000000700, 80.00000000000000000 ) ) ; +#2843 = AXIS2_PLACEMENT_3D ( 'NONE', #3609, #1038, #4037 ) ; +#2844 = FACE_OUTER_BOUND ( 'NONE', #100, .T. ) ; +#2845 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -18.74999999999998200, 80.00000000000001400 ) ) ; +#2846 = AXIS2_PLACEMENT_3D ( 'NONE', #3149, #561, #3586 ) ; +#2847 = CIRCLE ( 'NONE', #994, 1.250000000000001100 ) ; +#2848 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -6.591949208711870900E-015, 77.50000000000001400 ) ) ; +#2849 = ORIENTED_EDGE ( 'NONE', *, *, #4732, .F. ) ; +#2850 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2851 = EDGE_CURVE ( 'NONE', #245, #1992, #734, .T. ) ; +#2852 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2853 = VECTOR ( 'NONE', #2420, 1000.000000000000000 ) ; +#2854 = EDGE_CURVE ( 'NONE', #3708, #4088, #3902, .T. ) ; +#2855 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2856 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 6.636183724476979700, 8.838826586594303000 ) ) ; +#2857 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2858 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2859 = LINE ( 'NONE', #2501, #4977 ) ; +#2860 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -6.591949208711870900E-015, 78.75000000000001400 ) ) ; +#2861 = EDGE_CURVE ( 'NONE', #2375, #4750, #5407, .T. ) ; +#2862 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.50000000000000400, 24.99999999999999600 ) ) ; +#2863 = ORIENTED_EDGE ( 'NONE', *, *, #293, .F. ) ; +#2864 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2865 = ORIENTED_EDGE ( 'NONE', *, *, #3967, .F. ) ; +#2866 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.734723475976805600E-016, 0.0000000000000000000 ) ) ; +#2867 = VERTEX_POINT ( 'NONE', #5081 ) ; +#2868 = AXIS2_PLACEMENT_3D ( 'NONE', #4221, #4201, #4168 ) ; +#2869 = VERTEX_POINT ( 'NONE', #2104 ) ; +#2870 = AXIS2_PLACEMENT_3D ( 'NONE', #3309, #729, #3731 ) ; +#2871 = FACE_BOUND ( 'NONE', #4746, .T. ) ; +#2872 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 5.898570594946339600, 3.210168230852205300 ) ) ; +#2873 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2874 = VERTEX_POINT ( 'NONE', #2538 ) ; +#2875 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2876 = VERTEX_POINT ( 'NONE', #2952 ) ; +#2877 = AXIS2_PLACEMENT_3D ( 'NONE', #2700, #1829, #44 ) ; +#2878 = CARTESIAN_POINT ( 'NONE', ( 1.014649974264155500, -5.210977736463962500, 77.01803210429861200 ) ) ; +#2879 = LINE ( 'NONE', #1625, #3733 ) ; +#2880 = ORIENTED_EDGE ( 'NONE', *, *, #5124, .F. ) ; +#2881 = ORIENTED_EDGE ( 'NONE', *, *, #531, .T. ) ; +#2882 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -16.25000000000000700, 80.00000000000001400 ) ) ; +#2883 = EDGE_LOOP ( 'NONE', ( #3886, #3774, #3754, #2341 ) ) ; +#2884 = ORIENTED_EDGE ( 'NONE', *, *, #439, .F. ) ; +#2885 = FACE_OUTER_BOUND ( 'NONE', #2935, .T. ) ; +#2886 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2887 = ORIENTED_EDGE ( 'NONE', *, *, #5341, .F. ) ; +#2888 = VERTEX_POINT ( 'NONE', #386 ) ; +#2889 = CYLINDRICAL_SURFACE ( 'NONE', #1359, 1.200000000000006600 ) ; +#2890 = EDGE_CURVE ( 'NONE', #2955, #3460, #5156, .T. ) ; +#2891 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -30.00000000000000000, -4.336808689942141000E-016 ) ) ; +#2892 = EDGE_CURVE ( 'NONE', #978, #366, #4901, .T. ) ; +#2893 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 3.630949497465369500, 1.183932270135301900 ) ) ; +#2894 = CARTESIAN_POINT ( 'NONE', ( 0.0003408857351872252000, 0.9064297685158877500, 75.04501779491303600 ) ) ; +#2895 = CARTESIAN_POINT ( 'NONE', ( 2.296831729037852100E-014, -20.00000000000000700, 75.00000000000001400 ) ) ; +#2896 = ORIENTED_EDGE ( 'NONE', *, *, #2348, .F. ) ; +#2897 = CIRCLE ( 'NONE', #1290, 1.199999999999999700 ) ; +#2898 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -35.00000000000000000, 2.500000000000000000 ) ) ; +#2899 = CARTESIAN_POINT ( 'NONE', ( 34.63214864235386200, -7.308762734323566300E-015, 76.30535135764614600 ) ) ; +#2900 = LINE ( 'NONE', #4638, #1752 ) ; +#2901 = EDGE_CURVE ( 'NONE', #2489, #5464, #3759, .T. ) ; +#2902 = CARTESIAN_POINT ( 'NONE', ( 2.021286199229715100E-014, -8.750000000000012400, 75.00000000000001400 ) ) ; +#2903 = CARTESIAN_POINT ( 'NONE', ( -3.061616997867956200E-016, 5.000000000000000900, 77.50000000000001400 ) ) ; +#2904 = CIRCLE ( 'NONE', #3263, 1.199999999999999700 ) ; +#2905 = AXIS2_PLACEMENT_3D ( 'NONE', #1890, #4886, #2326 ) ; +#2906 = CYLINDRICAL_SURFACE ( 'NONE', #1035, 5.050799999999994400 ) ; +#2907 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#2908 = VECTOR ( 'NONE', #3936, 1000.000000000000000 ) ; +#2909 = AXIS2_PLACEMENT_3D ( 'NONE', #5211, #3550, #533 ) ; +#2910 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.8699660175343977300, 2.612865644646059400 ) ) ; +#2911 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -8.673617379884035500E-017, 1.000000000000000000 ) ) ; +#2912 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2913 = ORIENTED_EDGE ( 'NONE', *, *, #3811, .T. ) ; +#2914 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #3796, #1247, ( #2044 ) ) ; +#2915 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2916 = LINE ( 'NONE', #98, #895 ) ; +#2917 = CARTESIAN_POINT ( 'NONE', ( 1.734723475976430800E-015, 14.28532677484329500, 27.66555439680182000 ) ) ; +#2918 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 12.72397244724783900, 70.44885073465403000 ) ) ; +#2919 = FACE_OUTER_BOUND ( 'NONE', #2883, .T. ) ; +#2920 = ADVANCED_FACE ( 'NONE', ( #2640 ), #3629, .F. ) ; +#2921 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412000E-015, 11.80308736133259000, 27.96645961091094500 ) ) ; +#2922 = EDGE_CURVE ( 'NONE', #2726, #1189, #4769, .T. ) ; +#2923 = EDGE_CURVE ( 'NONE', #442, #2542, #4330, .T. ) ; +#2924 = EDGE_LOOP ( 'NONE', ( #2, #1475 ) ) ; +#2925 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.224646799147276800E-016, 0.0000000000000000000 ) ) ; +#2926 = CARTESIAN_POINT ( 'NONE', ( -1.250000000000001800, -7.589415207398531000E-015, 77.50000000000001400 ) ) ; +#2927 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#2928 = ORIENTED_EDGE ( 'NONE', *, *, #5465, .F. ) ; +#2929 = ORIENTED_EDGE ( 'NONE', *, *, #4366, .F. ) ; +#2930 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000700, 11.92799279162494000, 15.71789923317996200 ) ) ; +#2931 = ORIENTED_EDGE ( 'NONE', *, *, #825, .F. ) ; +#2932 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 10.12269286746764000, 18.66691764983219300 ) ) ; +#2933 = ORIENTED_EDGE ( 'NONE', *, *, #3855, .F. ) ; +#2934 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#2935 = EDGE_LOOP ( 'NONE', ( #1074, #1999, #1528, #3673, #2142 ) ) ; +#2936 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999999600, -18.75000000000000700, 77.50000000000001400 ) ) ; +#2937 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959411600E-015, 5.352640783100439700, 6.633635335353952600 ) ) ; +#2938 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#2939 = ORIENTED_EDGE ( 'NONE', *, *, #1800, .T. ) ; +#2940 = ORIENTED_EDGE ( 'NONE', *, *, #5391, .F. ) ; +#2941 = AXIS2_PLACEMENT_3D ( 'NONE', #480, #471, #447 ) ; +#2942 = VECTOR ( 'NONE', #115, 1000.000000000000000 ) ; +#2943 = VERTEX_POINT ( 'NONE', #4280 ) ; +#2944 = AXIS2_PLACEMENT_3D ( 'NONE', #4220, #1641, #4652 ) ; +#2945 = ORIENTED_EDGE ( 'NONE', *, *, #2648, .T. ) ; +#2946 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -35.00000000000000000, 35.00000000000000000 ) ) ; +#2947 = ORIENTED_EDGE ( 'NONE', *, *, #1446, .T. ) ; +#2948 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.387778780781444500E-015, 0.0000000000000000000 ) ) ; +#2949 = CIRCLE ( 'NONE', #453, 1.199999999999999700 ) ; +#2950 = ADVANCED_FACE ( 'NONE', ( #333 ), #4641, .T. ) ; +#2951 = AXIS2_PLACEMENT_3D ( 'NONE', #1540, #2409, #1518 ) ; +#2952 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.999999999999994700, 71.94000000000001200 ) ) ; +#2953 = ORIENTED_EDGE ( 'NONE', *, *, #2787, .T. ) ; +#2954 = CARTESIAN_POINT ( 'NONE', ( 32.49999999999999300, 5.727398496360281800, 3.019698308610384800 ) ) ; +#2955 = VERTEX_POINT ( 'NONE', #15 ) ; +#2956 = CIRCLE ( 'NONE', #1248, 1.200000000000006600 ) ; +#2957 = EDGE_CURVE ( 'NONE', #3277, #366, #1353, .T. ) ; +#2958 = EDGE_CURVE ( 'NONE', #5449, #4058, #193, .T. ) ; +#2959 = VERTEX_POINT ( 'NONE', #3453 ) ; +#2960 = ORIENTED_EDGE ( 'NONE', *, *, #5093, .T. ) ; +#2961 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 0.4409891574225981400, 2.523872327936345100 ) ) ; +#2962 = VECTOR ( 'NONE', #1426, 1000.000000000000000 ) ; +#2963 = APPROVAL_ROLE ( '' ) ; +#2964 = VECTOR ( 'NONE', #580, 1000.000000000000000 ) ; +#2965 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2966 = EDGE_CURVE ( 'NONE', #3141, #4441, #1614, .T. ) ; +#2967 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2968 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -30.00000000000001400, 60.00000000000000000 ) ) ; +#2969 = VECTOR ( 'NONE', #3588, 1000.000000000000000 ) ; +#2970 = CARTESIAN_POINT ( 'NONE', ( 0.2522330730247215900, -5.012756852080515000, 76.09432346314795800 ) ) ; +#2971 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.053972186726121700E-014, -1.000000000000000000 ) ) ; +#2972 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2973 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2974 = VECTOR ( 'NONE', #4959, 1000.000000000000000 ) ; +#2975 = AXIS2_PLACEMENT_3D ( 'NONE', #3570, #3019, #2973 ) ; +#2976 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2977 = ADVANCED_FACE ( 'NONE', ( #1215 ), #1079, .F. ) ; +#2978 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 13.92049464589353400, 24.95982954296660200 ) ) ; +#2979 = PLANE ( 'NONE', #1097 ) ; +#2980 = VERTEX_POINT ( 'NONE', #3109 ) ; +#2981 = CARTESIAN_POINT ( 'NONE', ( 0.1849183384590258100, -5.030638584888276200, 75.95605736619371800 ) ) ; +#2982 = AXIS2_PLACEMENT_3D ( 'NONE', #409, #3847, #840 ) ; +#2983 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -12.55080000000000200, 67.00000000000001400 ) ) ; +#2984 = CARTESIAN_POINT ( 'NONE', ( 32.78772655856666800, -8.677374591011480100, 77.48440911745542800 ) ) ; +#2985 = FACE_BOUND ( 'NONE', #1065, .T. ) ; +#2986 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2987 = VECTOR ( 'NONE', #3145, 1000.000000000000000 ) ; +#2988 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2989 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000004000, 4.361191058879315500, 1.713102734152321300 ) ) ; +#2990 = EDGE_LOOP ( 'NONE', ( #3639, #2960, #3681, #3873 ) ) ; +#2991 = EDGE_CURVE ( 'NONE', #2193, #47, #2230, .T. ) ; +#2992 = ORIENTED_EDGE ( 'NONE', *, *, #3890, .F. ) ; +#2993 = ORIENTED_EDGE ( 'NONE', *, *, #4155, .T. ) ; +#2994 = EDGE_CURVE ( 'NONE', #708, #2755, #68, .T. ) ; +#2995 = VERTEX_POINT ( 'NONE', #4415 ) ; +#2996 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2997 = EDGE_LOOP ( 'NONE', ( #5184, #5115, #2017, #5519 ) ) ; +#2998 = ADVANCED_FACE ( 'NONE', ( #4377 ), #3230, .T. ) ; +#2999 = EDGE_LOOP ( 'NONE', ( #4762, #2393, #1397, #1646 ) ) ; +#3000 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3001 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3002 = VECTOR ( 'NONE', #4994, 1000.000000000000000 ) ; +#3003 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -30.00000000000001400, 60.00000000000000000 ) ) ; +#3004 = ORIENTED_EDGE ( 'NONE', *, *, #5124, .T. ) ; +#3005 = CARTESIAN_POINT ( 'NONE', ( 1.377727649040711600E-015, -8.750000000000012400, 77.50000000000001400 ) ) ; +#3006 = EDGE_CURVE ( 'NONE', #996, #2820, #2089, .T. ) ; +#3007 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999996400, -4.999999999999982200, 77.50000000000001400 ) ) ; +#3008 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995700, 1.647987302177958200E-014, 77.50000000000001400 ) ) ; +#3009 = ORIENTED_EDGE ( 'NONE', *, *, #952, .F. ) ; +#3010 = AXIS2_PLACEMENT_3D ( 'NONE', #3848, #1286, #4285 ) ; +#3011 = FACE_OUTER_BOUND ( 'NONE', #3489, .T. ) ; +#3012 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 12.17267483857043000, 16.60018820000030000 ) ) ; +#3013 = ORIENTED_EDGE ( 'NONE', *, *, #2136, .F. ) ; +#3014 = VERTEX_POINT ( 'NONE', #4835 ) ; +#3015 = AXIS2_PLACEMENT_3D ( 'NONE', #3232, #1915, #211 ) ; +#3016 = ORIENTED_EDGE ( 'NONE', *, *, #2322, .T. ) ; +#3017 = LINE ( 'NONE', #1110, #4010 ) ; +#3018 = CARTESIAN_POINT ( 'NONE', ( 33.58489986586201300, -5.433076430485715300, 77.25762977529781500 ) ) ; +#3019 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3020 = ORIENTED_EDGE ( 'NONE', *, *, #4850, .F. ) ; +#3021 = EDGE_LOOP ( 'NONE', ( #3792, #2485 ) ) ; +#3022 = TOROIDAL_SURFACE ( 'NONE', #1928, 1.250000000000002200, 1.250000000000000000 ) ; +#3023 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5409, #295, #4177, #1598, #4601, #2036, #5015, #2471, #5426, #2902 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 1.626303258728256700E-019, 0.0004592101670904998500, 0.0009184203341809995800, 0.001377630501271499300, 0.001836840668361998900 ), + .UNSPECIFIED. ) ; +#3024 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, -6.591949208711870900E-015, 77.50000000000001400 ) ) ; +#3025 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 9.999999999999994700, 68.75000000000001400 ) ) ; +#3026 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3027 = CARTESIAN_POINT ( 'NONE', ( 0.005296993144875849900, -15.58548684748211400, 75.17717224190084800 ) ) ; +#3028 = ORIENTED_EDGE ( 'NONE', *, *, #4571, .T. ) ; +#3029 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.673617379884035500E-017, -1.000000000000000000 ) ) ; +#3030 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3031 = VECTOR ( 'NONE', #4640, 1000.000000000000000 ) ; +#3032 = EDGE_CURVE ( 'NONE', #245, #3429, #3365, .T. ) ; +#3033 = EDGE_CURVE ( 'NONE', #3199, #2652, #5339, .T. ) ; +#3034 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3035 = ADVANCED_FACE ( 'NONE', ( #945 ), #2724, .F. ) ; +#3036 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000700, 8.786796564403610800, 9.261039189301981000E-014 ) ) ; +#3037 = CIRCLE ( 'NONE', #4668, 1.199999999999992600 ) ; +#3038 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.500000000000003600, 72.05080000000001000 ) ) ; +#3039 = FACE_OUTER_BOUND ( 'NONE', #1920, .T. ) ; +#3040 = FACE_OUTER_BOUND ( 'NONE', #5139, .T. ) ; +#3041 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -30.00000000000000700, 36.20000000000000300 ) ) ; +#3042 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3043 = VECTOR ( 'NONE', #4763, 1000.000000000000000 ) ; +#3044 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 9.757819552369543900E-016, 0.0000000000000000000 ) ) ; +#3045 = CARTESIAN_POINT ( 'NONE', ( 0.02832571919072734300, 12.89417553273191300, 67.36130155685650300 ) ) ; +#3046 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999997900, -19.99999999999998200, 76.25000000000001400 ) ) ; +#3047 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3048 = ORIENTED_EDGE ( 'NONE', *, *, #1167, .F. ) ; +#3049 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -25.50000000000000400, 7.499999999999996400 ) ) ; +#3050 = FACE_OUTER_BOUND ( 'NONE', #58, .T. ) ; +#3051 = AXIS2_PLACEMENT_3D ( 'NONE', #2657, #2644, #2624 ) ; +#3052 = AXIS2_PLACEMENT_3D ( 'NONE', #4679, #5086, #2976 ) ; +#3053 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -6.736790197968178700E-017, -1.000000000000000000 ) ) ; +#3054 = ADVANCED_FACE ( 'NONE', ( #3094 ), #4854, .F. ) ; +#3055 = EDGE_LOOP ( 'NONE', ( #1665, #4472 ) ) ; +#3056 = CARTESIAN_POINT ( 'NONE', ( 2.174367049123124200E-014, -15.00000000000000900, 75.00000000000001400 ) ) ; +#3057 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.387778780781445700E-015, -1.000000000000000000 ) ) ; +#3058 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3059 = ORIENTED_EDGE ( 'NONE', *, *, #2994, .T. ) ; +#3060 = ORIENTED_EDGE ( 'NONE', *, *, #85, .F. ) ; +#3061 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999994300, 12.49999999999999300, 66.76856112887627100 ) ) ; +#3062 = VERTEX_POINT ( 'NONE', #152 ) ; +#3063 = EDGE_CURVE ( 'NONE', #2522, #2139, #5219, .T. ) ; +#3064 = EDGE_CURVE ( 'NONE', #2995, #2869, #1956, .T. ) ; +#3065 = DATE_AND_TIME ( #4208, #5310 ) ; +#3066 = ORIENTED_EDGE ( 'NONE', *, *, #2861, .T. ) ; +#3067 = VERTEX_POINT ( 'NONE', #1028 ) ; +#3068 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3069 = PLANE ( 'NONE', #2975 ) ; +#3070 = CYLINDRICAL_SURFACE ( 'NONE', #811, 5.050799999999994400 ) ; +#3071 = ORIENTED_EDGE ( 'NONE', *, *, #3888, .F. ) ; +#3072 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 14.99999999999999300, 40.00000000000001400 ) ) ; +#3073 = EDGE_LOOP ( 'NONE', ( #1712, #5078, #5003, #4777 ) ) ; +#3074 = ORIENTED_EDGE ( 'NONE', *, *, #2569, .T. ) ; +#3075 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3076 = EDGE_CURVE ( 'NONE', #4291, #5453, #1816, .T. ) ; +#3077 = VECTOR ( 'NONE', #2619, 1000.000000000000000 ) ; +#3078 = VERTEX_POINT ( 'NONE', #4887 ) ; +#3079 = ORIENTED_EDGE ( 'NONE', *, *, #3313, .T. ) ; +#3080 = AXIS2_PLACEMENT_3D ( 'NONE', #5468, #3795, #1233 ) ; +#3081 = ORIENTED_EDGE ( 'NONE', *, *, #5288, .F. ) ; +#3082 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -123.1296560144841400, 30.68637730413346900 ) ) ; +#3083 = VERTEX_POINT ( 'NONE', #1462 ) ; +#3084 = VERTEX_POINT ( 'NONE', #1892 ) ; +#3085 = ADVANCED_FACE ( 'NONE', ( #3964 ), #1682, .F. ) ; +#3086 = VECTOR ( 'NONE', #1755, 1000.000000000000000 ) ; +#3087 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 6.661338147750938000E-014, 4.336808689942017700E-016 ) ) ; +#3088 = AXIS2_PLACEMENT_3D ( 'NONE', #225, #2822, #677 ) ; +#3089 = ORIENTED_EDGE ( 'NONE', *, *, #3202, .F. ) ; +#3090 = ORIENTED_EDGE ( 'NONE', *, *, #598, .F. ) ; +#3091 = CYLINDRICAL_SURFACE ( 'NONE', #1459, 3.189999999999998600 ) ; +#3092 = VERTEX_POINT ( 'NONE', #4479 ) ; +#3093 = DIRECTION ( 'NONE', ( -1.665334536937734500E-014, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#3094 = FACE_OUTER_BOUND ( 'NONE', #984, .T. ) ; +#3095 = EDGE_CURVE ( 'NONE', #300, #2618, #4103, .T. ) ; +#3096 = VECTOR ( 'NONE', #995, 1000.000000000000000 ) ; +#3097 = EDGE_CURVE ( 'NONE', #980, #2222, #663, .T. ) ; +#3098 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000700, 0.8699660164125714300, 2.612865648236661900 ) ) ; +#3099 = CARTESIAN_POINT ( 'NONE', ( 37.50099999999998300, -25.50000000000000400, 26.19999999999999900 ) ) ; +#3100 = LINE ( 'NONE', #2725, #5348 ) ; +#3101 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -25.00000000000000000, 68.75000000000001400 ) ) ; +#3102 = CARTESIAN_POINT ( 'NONE', ( 1.802132534134103200, -9.241075159424234200, 77.40435336227302800 ) ) ; +#3103 = FACE_OUTER_BOUND ( 'NONE', #1450, .T. ) ; +#3104 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3105 = ADVANCED_FACE ( 'NONE', ( #2833 ), #1548, .F. ) ; +#3106 = EDGE_CURVE ( 'NONE', #4088, #124, #4960, .T. ) ; +#3107 = AXIS2_PLACEMENT_3D ( 'NONE', #1087, #4087, #1510 ) ; +#3108 = FACE_BOUND ( 'NONE', #4565, .T. ) ; +#3109 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.0000000000000000000, -1.301042606982605300E-015 ) ) ; +#3110 = PLANE ( 'NONE', #4047 ) ; +#3111 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 2.775557561562891400E-016 ) ) ; +#3112 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000700, 6.636183724924655400, 8.838826586361847100 ) ) ; +#3113 = LINE ( 'NONE', #2679, #2987 ) ; +#3114 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -13.63795574274766200, 21.10709478017819100 ) ) ; +#3115 = AXIS2_PLACEMENT_3D ( 'NONE', #5285, #2760, #164 ) ; +#3116 = EDGE_LOOP ( 'NONE', ( #1139, #381, #4689 ) ) ; +#3117 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -23.00000000000000400, 0.0000000000000000000 ) ) ; +#3118 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000001800, -15.00000000000000900, 77.50000000000001400 ) ) ; +#3119 = ORIENTED_EDGE ( 'NONE', *, *, #904, .T. ) ; +#3120 = ORIENTED_EDGE ( 'NONE', *, *, #145, .F. ) ; +#3121 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891400E-016, -1.000000000000000000 ) ) ; +#3122 = EDGE_LOOP ( 'NONE', ( #1185, #4616, #3850, #2621 ) ) ; +#3123 = EDGE_CURVE ( 'NONE', #3277, #2332, #5085, .T. ) ; +#3124 = VERTEX_POINT ( 'NONE', #5325 ) ; +#3125 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999930300, -7.500000000000009800, 77.50000000000001400 ) ) ; +#3126 = EDGE_CURVE ( 'NONE', #3448, #495, #401, .T. ) ; +#3127 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -35.00000000000000000, 36.20000000000000300 ) ) ; +#3128 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3129 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 3.469446951953611000E-015, 1.000000000000000000 ) ) ; +#3130 = ORIENTED_EDGE ( 'NONE', *, *, #2348, .T. ) ; +#3131 = CIRCLE ( 'NONE', #1295, 2.500000000000002200 ) ; +#3132 = CARTESIAN_POINT ( 'NONE', ( 8.244528225426736300E-016, -10.00000000000001200, 77.50000000000001400 ) ) ; +#3133 = ADVANCED_FACE ( 'NONE', ( #3691 ), #2120, .T. ) ; +#3134 = ORIENTED_EDGE ( 'NONE', *, *, #5164, .T. ) ; +#3135 = CARTESIAN_POINT ( 'NONE', ( 34.86758637246534700, -9.929100043975507700, 75.81454276716483800 ) ) ; +#3136 = CARTESIAN_POINT ( 'NONE', ( 2.602085213965175100E-015, 4.131788398102716400, 1.541548179883989000 ) ) ; +#3137 = EDGE_LOOP ( 'NONE', ( #778, #1938, #2357, #1563 ) ) ; +#3138 = EDGE_CURVE ( 'NONE', #4441, #3537, #258, .T. ) ; +#3139 = ORIENTED_EDGE ( 'NONE', *, *, #2176, .F. ) ; +#3140 = LINE ( 'NONE', #4576, #5257 ) ; +#3141 = VERTEX_POINT ( 'NONE', #1216 ) ; +#3142 = ORIENTED_EDGE ( 'NONE', *, *, #1953, .T. ) ; +#3143 = CARTESIAN_POINT ( 'NONE', ( 13.00000000000000200, -35.00000000000000700, 55.00000000000000700 ) ) ; +#3144 = ORIENTED_EDGE ( 'NONE', *, *, #5465, .T. ) ; +#3145 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#3146 = VERTEX_POINT ( 'NONE', #3648 ) ; +#3147 = CIRCLE ( 'NONE', #5242, 5.050800000000001500 ) ; +#3148 = AXIS2_PLACEMENT_3D ( 'NONE', #4381, #4376, #4363 ) ; +#3149 = CARTESIAN_POINT ( 'NONE', ( -1.530808498933859800E-016, 3.750000000000000900, 78.75000000000001400 ) ) ; +#3150 = ORIENTED_EDGE ( 'NONE', *, *, #1980, .T. ) ; +#3151 = ORIENTED_EDGE ( 'NONE', *, *, #709, .F. ) ; +#3152 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -12.55080000000000200, 67.00000000000001400 ) ) ; +#3153 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3154 = LINE ( 'NONE', #2891, #1878 ) ; +#3155 = AXIS2_PLACEMENT_3D ( 'NONE', #3292, #706, #4586 ) ; +#3156 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#3157 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 5.576111355031765800, 2.850265655856214100 ) ) ; +#3158 = ORIENTED_EDGE ( 'NONE', *, *, #4139, .F. ) ; +#3159 = VECTOR ( 'NONE', #2014, 1000.000000000000100 ) ; +#3160 = AXIS2_PLACEMENT_3D ( 'NONE', #3177, #252, #3176 ) ; +#3161 = FACE_OUTER_BOUND ( 'NONE', #929, .T. ) ; +#3162 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3163 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -13.55080000000001000, 22.10328947826994300 ) ) ; +#3164 = ADVANCED_FACE ( 'NONE', ( #1419 ), #131, .T. ) ; +#3165 = CIRCLE ( 'NONE', #2118, 2.500000000000000000 ) ; +#3166 = FACE_OUTER_BOUND ( 'NONE', #2997, .T. ) ; +#3167 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 14.99999999999999300, 40.00000000000001400 ) ) ; +#3168 = CARTESIAN_POINT ( 'NONE', ( -1.250000000000000900, -10.00000000000001200, 77.50000000000001400 ) ) ; +#3169 = EDGE_CURVE ( 'NONE', #2827, #39, #3565, .T. ) ; +#3170 = VECTOR ( 'NONE', #1356, 1000.000000000000000 ) ; +#3171 = EDGE_CURVE ( 'NONE', #3217, #2867, #1289, .T. ) ; +#3172 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3173 = ORIENTED_EDGE ( 'NONE', *, *, #5019, .T. ) ; +#3174 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3175 = VECTOR ( 'NONE', #637, 1000.000000000000000 ) ; +#3176 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3177 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, -16.25000000000000700, 78.75000000000001400 ) ) ; +#3178 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3179 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, 11.19999999999999400, 68.75000000000001400 ) ) ; +#3180 = CYLINDRICAL_SURFACE ( 'NONE', #1137, 3.189999999999998600 ) ; +#3181 = EDGE_CURVE ( 'NONE', #5134, #1779, #4709, .T. ) ; +#3182 = AXIS2_PLACEMENT_3D ( 'NONE', #4863, #2740, #150 ) ; +#3183 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -14.99100622546988300, 16.15537812313072400 ) ) ; +#3184 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#3185 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3186 = ORIENTED_EDGE ( 'NONE', *, *, #399, .T. ) ; +#3187 = AXIS2_PLACEMENT_3D ( 'NONE', #939, #3511, #497 ) ; +#3188 = ADVANCED_FACE ( 'NONE', ( #4569 ), #3293, .F. ) ; +#3189 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 8.371796659456105500, 12.85360967265748000 ) ) ; +#3190 = ORIENTED_EDGE ( 'NONE', *, *, #4921, .T. ) ; +#3191 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #2675, #4255, ( #2044 ) ) ; +#3192 = ORIENTED_EDGE ( 'NONE', *, *, #2176, .T. ) ; +#3193 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995700, -16.25000000000000700, 75.00000000000001400 ) ) ; +#3194 = EDGE_LOOP ( 'NONE', ( #2491, #2849, #4426, #2761, #3089 ) ) ; +#3195 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -23.00000000000000400, 2.500000000000000000 ) ) ; +#3196 = PLANE ( 'NONE', #1600 ) ; +#3197 = PERSON_AND_ORGANIZATION ( #5121, #5438 ) ; +#3198 = ORIENTED_EDGE ( 'NONE', *, *, #3854, .F. ) ; +#3199 = VERTEX_POINT ( 'NONE', #2535 ) ; +#3200 = EDGE_CURVE ( 'NONE', #2820, #2697, #3430, .T. ) ; +#3201 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -3.469446951953611000E-015, -1.000000000000000000 ) ) ; +#3202 = EDGE_CURVE ( 'NONE', #2464, #1798, #4, .T. ) ; +#3203 = VECTOR ( 'NONE', #4353, 1000.000000000000000 ) ; +#3204 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#3205 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3206 = ORIENTED_EDGE ( 'NONE', *, *, #3811, .F. ) ; +#3207 = DIRECTION ( 'NONE', ( 1.734723475976807100E-016, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3208 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -2.220446049250313400E-014, 80.00000000000001400 ) ) ; +#3209 = ORIENTED_EDGE ( 'NONE', *, *, #204, .F. ) ; +#3210 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.500000000000008000, 15.49999999999998600 ) ) ; +#3211 = VERTEX_POINT ( 'NONE', #814 ) ; +#3212 = VECTOR ( 'NONE', #4728, 1000.000000000000000 ) ; +#3213 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -32.40000000000000600, 35.00000000000000000 ) ) ; +#3214 = ORIENTED_EDGE ( 'NONE', *, *, #4287, .T. ) ; +#3215 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -2.449200000000006500, 15.49999999999998400 ) ) ; +#3216 = ORIENTED_EDGE ( 'NONE', *, *, #2609, .F. ) ; +#3217 = VERTEX_POINT ( 'NONE', #1684 ) ; +#3218 = LINE ( 'NONE', #65, #3086 ) ; +#3219 = CARTESIAN_POINT ( 'NONE', ( 3.061616997868437900E-016, -7.459310946700275200E-015, 77.50000000000001400 ) ) ; +#3220 = PLANE ( 'NONE', #130 ) ; +#3221 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3222 = ADVANCED_FACE ( 'NONE', ( #4442 ), #4260, .F. ) ; +#3223 = VERTEX_POINT ( 'NONE', #5499 ) ; +#3224 = ORIENTED_EDGE ( 'NONE', *, *, #3106, .T. ) ; +#3225 = CIRCLE ( 'NONE', #21, 1.250000000000001100 ) ; +#3226 = CARTESIAN_POINT ( 'NONE', ( 35.00004784055881400, -16.07614017638147900, 75.00911505914290000 ) ) ; +#3227 = AXIS2_PLACEMENT_3D ( 'NONE', #556, #653, #547 ) ; +#3228 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3229 = AXIS2_PLACEMENT_3D ( 'NONE', #2517, #5469, #2948 ) ; +#3230 = TOROIDAL_SURFACE ( 'NONE', #1975, 1.250000000000002200, 1.250000000000000000 ) ; +#3231 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#3232 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, -30.00000000000001100, 72.00000000000001400 ) ) ; +#3233 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.734723475976807100E-016, 0.0000000000000000000 ) ) ; +#3234 = CIRCLE ( 'NONE', #2302, 3.189999999999998600 ) ; +#3235 = FACE_OUTER_BOUND ( 'NONE', #4293, .T. ) ; +#3236 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3237 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995700, 1.249999999999992700, 78.75000000000001400 ) ) ; +#3238 = FACE_OUTER_BOUND ( 'NONE', #906, .T. ) ; +#3239 = EDGE_CURVE ( 'NONE', #2980, #1594, #17, .T. ) ; +#3240 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3241 = EDGE_CURVE ( 'NONE', #3329, #3146, #1007, .T. ) ; +#3242 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#3243 = LINE ( 'NONE', #1395, #957 ) ; +#3244 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 11.80190846145087300, 27.95631500732903900 ) ) ; +#3245 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3246 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3247 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -35.00000000000000000, 35.00000000000000000 ) ) ; +#3248 = EDGE_CURVE ( 'NONE', #5385, #376, #1803, .T. ) ; +#3249 = LINE ( 'NONE', #2895, #3381 ) ; +#3250 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.084711984178605200E-016, 5.510910596162838100E-016 ) ) ; +#3251 = CYLINDRICAL_SURFACE ( 'NONE', #2110, 2.500000000000002200 ) ; +#3252 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999994300, 10.00000000000002000, 71.94000000000001200 ) ) ; +#3253 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#3254 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3255 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -6.591949208711870900E-015, 78.75000000000001400 ) ) ; +#3256 = VERTEX_POINT ( 'NONE', #5406 ) ; +#3257 = AXIS2_PLACEMENT_3D ( 'NONE', #573, #3594, #1019 ) ; +#3258 = ORIENTED_EDGE ( 'NONE', *, *, #2901, .F. ) ; +#3259 = EDGE_LOOP ( 'NONE', ( #2637, #3004, #3119, #3206 ) ) ; +#3260 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 12.33788046413358900, 17.15809506167390800 ) ) ; +#3261 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.734723475976805600E-016, 0.0000000000000000000 ) ) ; +#3262 = ORIENTED_EDGE ( 'NONE', *, *, #1550, .F. ) ; +#3263 = AXIS2_PLACEMENT_3D ( 'NONE', #4469, #2829, #4567 ) ; +#3264 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -35.00000000000000700, 72.00000000000001400 ) ) ; +#3265 = VERTEX_POINT ( 'NONE', #2882 ) ; +#3266 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3267 = EDGE_LOOP ( 'NONE', ( #4486, #4632, #3947, #1443, #3612, #4684, #1172, #4011, #3224, #2211, #5261, #3066, #4543, #1861 ) ) ; +#3268 = CIRCLE ( 'NONE', #698, 1.199999999999999700 ) ; +#3269 = ORIENTED_EDGE ( 'NONE', *, *, #4258, .F. ) ; +#3270 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3271 = PLANE ( 'NONE', #2592 ) ; +#3272 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.449200000000003800, 67.00000000000001400 ) ) ; +#3273 = ORIENTED_EDGE ( 'NONE', *, *, #2210, .F. ) ; +#3274 = EDGE_LOOP ( 'NONE', ( #2800, #61, #2945, #2690, #1794, #1325, #108, #4755, #2527, #1132 ) ) ; +#3275 = CYLINDRICAL_SURFACE ( 'NONE', #925, 1.199999999999999700 ) ; +#3276 = ORIENTED_EDGE ( 'NONE', *, *, #1167, .T. ) ; +#3277 = VERTEX_POINT ( 'NONE', #3321 ) ; +#3278 = EDGE_CURVE ( 'NONE', #1001, #3466, #2281, .T. ) ; +#3279 = ORIENTED_EDGE ( 'NONE', *, *, #4790, .F. ) ; +#3280 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3281 = EDGE_CURVE ( 'NONE', #2067, #161, #876, .T. ) ; +#3282 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 8.862820753551286400, 7.700080826380451000 ) ) ; +#3283 = ORIENTED_EDGE ( 'NONE', *, *, #3927, .F. ) ; +#3284 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -14.55080000000001100, 21.18695830425251000 ) ) ; +#3285 = CYLINDRICAL_SURFACE ( 'NONE', #4967, 3.189999999999998600 ) ; +#3286 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3287 = VERTEX_POINT ( 'NONE', #3771 ) ; +#3288 = ORIENTED_EDGE ( 'NONE', *, *, #2622, .F. ) ; +#3289 = FACE_OUTER_BOUND ( 'NONE', #795, .T. ) ; +#3290 = EDGE_CURVE ( 'NONE', #4357, #4604, #4171, .T. ) ; +#3291 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, -6.591949208711870900E-015, 78.75000000000001400 ) ) ; +#3292 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -7.500000000000009800, 75.00000000000001400 ) ) ; +#3293 = CYLINDRICAL_SURFACE ( 'NONE', #5370, 1.199999999999999700 ) ; +#3294 = AXIS2_PLACEMENT_3D ( 'NONE', #2127, #822, #5102 ) ; +#3295 = VECTOR ( 'NONE', #4613, 1000.000000000000000 ) ; +#3296 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.224646799147276800E-016, 0.0000000000000000000 ) ) ; +#3297 = AXIS2_PLACEMENT_3D ( 'NONE', #2086, #4032, #2772 ) ; +#3298 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 3.724300802143493300, 4.533598118576865200 ) ) ; +#3299 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.387778780781442500E-015, 0.0000000000000000000 ) ) ; +#3300 = AXIS2_PLACEMENT_3D ( 'NONE', #5033, #2494, #5442 ) ; +#3301 = VECTOR ( 'NONE', #5138, 1000.000000000000000 ) ; +#3302 = VECTOR ( 'NONE', #2454, 1000.000000000000000 ) ; +#3303 = CARTESIAN_POINT ( 'NONE', ( 0.6361465370758903100, -5.079819048947655300, 76.67517769544245700 ) ) ; +#3304 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891400E-016, -1.000000000000000000 ) ) ; +#3305 = CARTESIAN_POINT ( 'NONE', ( 35.00004716580991700, 1.076355313684160400, 75.00910634871479500 ) ) ; +#3306 = CIRCLE ( 'NONE', #25, 2.500000000000002200 ) ; +#3307 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3308 = EDGE_LOOP ( 'NONE', ( #3276, #2881 ) ) ; +#3309 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, -35.00000000000000700, 72.00000000000001400 ) ) ; +#3310 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -2.449200000000003800, 67.00000000000001400 ) ) ; +#3311 = EDGE_CURVE ( 'NONE', #3211, #4552, #1146, .T. ) ; +#3312 = VECTOR ( 'NONE', #1113, 1000.000000000000000 ) ; +#3313 = EDGE_CURVE ( 'NONE', #2553, #931, #5273, .T. ) ; +#3314 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999997900, -16.25000000000000700, 76.25000000000001400 ) ) ; +#3315 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 3.375949571202518500, 1.018937648242556300 ) ) ; +#3316 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3317 = CARTESIAN_POINT ( 'NONE', ( 0.09585428130640344400, 0.1306456100638016000, 75.68975725390724600 ) ) ; +#3318 = VECTOR ( 'NONE', #824, 1000.000000000000100 ) ; +#3319 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.734723475976807100E-016, -4.814824860968089600E-032 ) ) ; +#3320 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -14.99100622546988300, 16.15537812313072400 ) ) ; +#3321 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -32.50000000000000000, 10.00000000000000500 ) ) ; +#3322 = VERTEX_POINT ( 'NONE', #5044 ) ; +#3323 = DIRECTION ( 'NONE', ( 1.734723475976806800E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3324 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 12.49999999999999300, 80.00000000000001400 ) ) ; +#3325 = EDGE_LOOP ( 'NONE', ( #2993, #3549, #5145, #679, #5053 ) ) ; +#3326 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3327 = EDGE_LOOP ( 'NONE', ( #1092, #1473, #1809, #2539, #4498 ) ) ; +#3328 = AXIS2_PLACEMENT_3D ( 'NONE', #2785, #2801, #2852 ) ; +#3329 = VERTEX_POINT ( 'NONE', #350 ) ; +#3330 = AXIS2_PLACEMENT_3D ( 'NONE', #4480, #1909, #4909 ) ; +#3331 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 1.533662983634769700, 0.1973351038550343600 ) ) ; +#3332 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, -35.00000000000000700, 80.00000000000000000 ) ) ; +#3333 = ORIENTED_EDGE ( 'NONE', *, *, #3501, .T. ) ; +#3334 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -13.63795574274766200, 21.10709478017819100 ) ) ; +#3335 = ADVANCED_FACE ( 'NONE', ( #730 ), #591, .F. ) ; +#3336 = ORIENTED_EDGE ( 'NONE', *, *, #1377, .T. ) ; +#3337 = AXIS2_PLACEMENT_3D ( 'NONE', #3478, #905, #3910 ) ; +#3338 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -32.40000000000000600, 38.19000000000000500 ) ) ; +#3339 = VECTOR ( 'NONE', #3053, 1000.000000000000000 ) ; +#3340 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 14.05754796629454300, 25.91615084546589600 ) ) ; +#3341 = ORIENTED_EDGE ( 'NONE', *, *, #832, .F. ) ; +#3342 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -5.000000000000006200, 77.50000000000001400 ) ) ; +#3343 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995700, 1.249999999999992700, 77.50000000000001400 ) ) ; +#3344 = ORIENTED_EDGE ( 'NONE', *, *, #3779, .F. ) ; +#3345 = EDGE_LOOP ( 'NONE', ( #5494, #4223, #567, #3482 ) ) ; +#3346 = LINE ( 'NONE', #5117, #5451 ) ; +#3347 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -30.00000000000001100, 77.50000000000000000 ) ) ; +#3348 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 11.03348329007932800, 22.87382247291569500 ) ) ; +#3349 = PLANE ( 'NONE', #4456 ) ; +#3350 = VERTEX_POINT ( 'NONE', #3364 ) ; +#3351 = ORIENTED_EDGE ( 'NONE', *, *, #4830, .T. ) ; +#3352 = CIRCLE ( 'NONE', #5069, 1.250000000000002200 ) ; +#3353 = EDGE_CURVE ( 'NONE', #2060, #4696, #1882, .T. ) ; +#3354 = PLANE ( 'NONE', #3080 ) ; +#3355 = EDGE_CURVE ( 'NONE', #5312, #2074, #2897, .T. ) ; +#3356 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, -15.00000000000000900, 77.50000000000001400 ) ) ; +#3357 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#3358 = ORIENTED_EDGE ( 'NONE', *, *, #2795, .F. ) ; +#3359 = ORIENTED_EDGE ( 'NONE', *, *, #135, .F. ) ; +#3360 = LINE ( 'NONE', #5190, #5463 ) ; +#3361 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #590 ) ; +#3362 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000002800, 11.07693840765891800, 12.99949180777979900 ) ) ; +#3363 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 12.33154708690201000, 17.20091597934178300 ) ) ; +#3364 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -12.55080000000001000, 22.10328947826994300 ) ) ; +#3365 = LINE ( 'NONE', #3127, #4240 ) ; +#3366 = EDGE_CURVE ( 'NONE', #2618, #300, #1747, .T. ) ; +#3367 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, 9.999999999999994700, 68.75000000000001400 ) ) ; +#3368 = ADVANCED_FACE ( 'NONE', ( #4021 ), #4251, .F. ) ; +#3369 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412800E-015, 4.592183230939172100, 5.559424270637745900 ) ) ; +#3370 = LINE ( 'NONE', #2231, #4382 ) ; +#3371 = LINE ( 'NONE', #3082, #2234 ) ; +#3372 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3373 = CIRCLE ( 'NONE', #1364, 2.500000000000002200 ) ; +#3374 = AXIS2_PLACEMENT_3D ( 'NONE', #1970, #2405, #562 ) ; +#3375 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3376 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999997200, -8.749999999999989300, 77.50000000000001400 ) ) ; +#3377 = ORIENTED_EDGE ( 'NONE', *, *, #4815, .F. ) ; +#3378 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -30.00000000000000700, 35.00000000000000000 ) ) ; +#3379 = VECTOR ( 'NONE', #38, 1000.000000000000000 ) ; +#3380 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000700, 4.712141533733778900, 2.012452413530957600 ) ) ; +#3381 = VECTOR ( 'NONE', #2835, 1000.000000000000000 ) ; +#3382 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999994300, 10.00000000000002000, 68.75000000000001400 ) ) ; +#3383 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.928593550334433700E-014, 2.500000000000000000 ) ) ; +#3384 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -35.00000000000000000, -3.035766082959412800E-015 ) ) ; +#3385 = DATE_TIME_ROLE ( 'creation_date' ) ; +#3386 = EDGE_CURVE ( 'NONE', #2140, #117, #1608, .T. ) ; +#3387 = EDGE_CURVE ( 'NONE', #442, #2669, #472, .T. ) ; +#3388 = FACE_OUTER_BOUND ( 'NONE', #3308, .T. ) ; +#3389 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3390 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -2.449200000000003800, 67.00000000000001400 ) ) ; +#3391 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3392 = ADVANCED_FACE ( 'NONE', ( #2636 ), #330, .F. ) ; +#3393 = ORIENTED_EDGE ( 'NONE', *, *, #1654, .T. ) ; +#3394 = ORIENTED_EDGE ( 'NONE', *, *, #4571, .F. ) ; +#3395 = ORIENTED_EDGE ( 'NONE', *, *, #4858, .T. ) ; +#3396 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 3.293663083519129700E-014, 2.500000000000000000 ) ) ; +#3397 = EDGE_CURVE ( 'NONE', #1983, #3537, #2762, .T. ) ; +#3398 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3399 = ORIENTED_EDGE ( 'NONE', *, *, #2677, .F. ) ; +#3400 = AXIS2_PLACEMENT_3D ( 'NONE', #2327, #3204, #614 ) ; +#3401 = ORIENTED_EDGE ( 'NONE', *, *, #827, .T. ) ; +#3402 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000003100, 0.9549220305234902300, 0.06199630420579352300 ) ) ; +#3403 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000001400, 12.88380020190735900, 19.39531843940423900 ) ) ; +#3404 = VERTEX_POINT ( 'NONE', #410 ) ; +#3405 = LINE ( 'NONE', #4104, #4417 ) ; +#3406 = EDGE_LOOP ( 'NONE', ( #3483, #2150, #5520, #5062, #2161, #101, #689 ) ) ; +#3407 = AXIS2_PLACEMENT_3D ( 'NONE', #5269, #3563, #2734 ) ; +#3408 = ORIENTED_EDGE ( 'NONE', *, *, #4853, .F. ) ; +#3409 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#3410 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.684197549492044600E-016, -1.000000000000000000 ) ) ; +#3411 = ORIENTED_EDGE ( 'NONE', *, *, #1926, .T. ) ; +#3412 = CARTESIAN_POINT ( 'NONE', ( 33.07907090243440300, -9.109460760092851200, 77.43424279277026300 ) ) ; +#3413 = LINE ( 'NONE', #3667, #3547 ) ; +#3414 = ORIENTED_EDGE ( 'NONE', *, *, #4141, .F. ) ; +#3415 = ORIENTED_EDGE ( 'NONE', *, *, #432, .F. ) ; +#3416 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.500000000000003600, 67.00000000000001400 ) ) ; +#3417 = ORIENTED_EDGE ( 'NONE', *, *, #985, .F. ) ; +#3418 = ORIENTED_EDGE ( 'NONE', *, *, #3698, .F. ) ; +#3419 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3420 = LINE ( 'NONE', #4054, #3556 ) ; +#3421 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3422 = EDGE_CURVE ( 'NONE', #2888, #2980, #3896, .T. ) ; +#3423 = EDGE_CURVE ( 'NONE', #3810, #2959, #3756, .T. ) ; +#3424 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000004400, 5.757153897936813500, 3.012296295426245800 ) ) ; +#3425 = ORIENTED_EDGE ( 'NONE', *, *, #4181, .F. ) ; +#3426 = VERTEX_POINT ( 'NONE', #2584 ) ; +#3427 = ADVANCED_FACE ( 'NONE', ( #3626 ), #4636, .F. ) ; +#3428 = VECTOR ( 'NONE', #3242, 1000.000000000000000 ) ; +#3429 = VERTEX_POINT ( 'NONE', #1303 ) ; +#3430 = LINE ( 'NONE', #380, #2163 ) ; +#3431 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3432 = EDGE_CURVE ( 'NONE', #924, #4302, #262, .T. ) ; +#3433 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#3434 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999994300, -6.249999999999982200, 75.00000000000001400 ) ) ; +#3435 = TOROIDAL_SURFACE ( 'NONE', #2083, 1.250000000000002200, 1.250000000000000000 ) ; +#3436 = CARTESIAN_POINT ( 'NONE', ( 33.96446609406726900, -21.53553390593274100, 5.233535547221668000E-016 ) ) ; +#3437 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5074, #5482, #1253, #4259, #1683, #4687, #2117, #5094, #2557, #5497, #2981, #402 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0004578727004010222900, 0.0009157454008020445800, 0.001144681751002554700, 0.001373618101203064900, 0.001831490801604085000 ), + .UNSPECIFIED. ) ; +#3438 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.43121245093975300, 11.12379794200893500 ) ) ; +#3439 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3440 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3441 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -35.00000000000000000, 38.19000000000000500 ) ) ; +#3442 = LINE ( 'NONE', #4743, #1152 ) ; +#3443 = FACE_OUTER_BOUND ( 'NONE', #3928, .T. ) ; +#3444 = AXIS2_PLACEMENT_3D ( 'NONE', #4091, #4081, #4067 ) ; +#3445 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000004000, 13.26553554239201600, 21.21554516313398900 ) ) ; +#3446 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807100E-016 ) ) ; +#3447 = FACE_OUTER_BOUND ( 'NONE', #1043, .T. ) ; +#3448 = VERTEX_POINT ( 'NONE', #2187 ) ; +#3449 = CARTESIAN_POINT ( 'NONE', ( 33.19786746586594000, -5.758924840575742700, 77.40435336227298500 ) ) ; +#3450 = CIRCLE ( 'NONE', #1213, 1.200000000000006600 ) ; +#3451 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.734723475976805600E-016, 0.0000000000000000000 ) ) ; +#3452 = ADVANCED_FACE ( 'NONE', ( #1349 ), #2359, .F. ) ; +#3453 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, -8.750000000000012400, 77.50000000000001400 ) ) ; +#3454 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3455 = CARTESIAN_POINT ( 'NONE', ( 0.05455682192485419900, -15.21088860356838300, 75.53508473369396400 ) ) ; +#3456 = CYLINDRICAL_SURFACE ( 'NONE', #5511, 1.000000000000000900 ) ; +#3457 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.00000000000000000, 68.75000000000001400 ) ) ; +#3458 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3459 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.750000000000012400, 80.00000000000001400 ) ) ; +#3460 = VERTEX_POINT ( 'NONE', #3046 ) ; +#3461 = EDGE_CURVE ( 'NONE', #4020, #563, #2493, .T. ) ; +#3462 = EDGE_CURVE ( 'NONE', #2197, #708, #1480, .T. ) ; +#3463 = EDGE_LOOP ( 'NONE', ( #3377, #4547, #5014, #3425 ) ) ; +#3464 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, 5.551115123125778000E-015 ) ) ; +#3465 = CARTESIAN_POINT ( 'NONE', ( -1.249999999999999600, -18.75000000000000700, 77.50000000000001400 ) ) ; +#3466 = VERTEX_POINT ( 'NONE', #2202 ) ; +#3467 = DIRECTION ( 'NONE', ( 1.224646799147276800E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#3468 = VERTEX_POINT ( 'NONE', #483 ) ; +#3469 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 8.786796564403578800, 1.524266227890324700E-015 ) ) ; +#3470 = CARTESIAN_POINT ( 'NONE', ( 0.09708713634879974400, 13.18993461597466100, 68.38949627301120400 ) ) ; +#3471 = ORIENTED_EDGE ( 'NONE', *, *, #1234, .F. ) ; +#3472 = EDGE_CURVE ( 'NONE', #3583, #2874, #186, .T. ) ; +#3473 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3474 = CARTESIAN_POINT ( 'NONE', ( 1.530808498934121300E-015, -10.00000000000001200, 77.50000000000001400 ) ) ; +#3475 = ORIENTED_EDGE ( 'NONE', *, *, #2648, .F. ) ; +#3476 = AXIS2_PLACEMENT_3D ( 'NONE', #2781, #188, #3201 ) ; +#3477 = FACE_OUTER_BOUND ( 'NONE', #3327, .T. ) ; +#3478 = CARTESIAN_POINT ( 'NONE', ( 33.39999999999999100, -24.99999999999997900, 68.75000000000001400 ) ) ; +#3479 = ADVANCED_FACE ( 'NONE', ( #1210 ), #1075, .T. ) ; +#3480 = VERTEX_POINT ( 'NONE', #1776 ) ; +#3481 = CARTESIAN_POINT ( 'NONE', ( -7.465058425342031700E-013, 8.888276837544237800, 7.750054011489634600 ) ) ; +#3482 = ORIENTED_EDGE ( 'NONE', *, *, #5192, .F. ) ; +#3483 = ORIENTED_EDGE ( 'NONE', *, *, #5063, .T. ) ; +#3484 = LINE ( 'NONE', #5503, #52 ) ; +#3485 = EDGE_LOOP ( 'NONE', ( #4433, #1321 ) ) ; +#3486 = SECURITY_CLASSIFICATION ( '', '', #1679 ) ; +#3487 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -12.55080000000000200, 67.00000000000001400 ) ) ; +#3488 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995700, -7.372574772901430200E-015, 77.50000000000001400 ) ) ; +#3489 = EDGE_LOOP ( 'NONE', ( #2399, #870, #1854, #3081 ) ) ; +#3490 = DIRECTION ( 'NONE', ( 1.734723475976806800E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3491 = ORIENTED_EDGE ( 'NONE', *, *, #4572, .F. ) ; +#3492 = FACE_OUTER_BOUND ( 'NONE', #3654, .T. ) ; +#3493 = DIRECTION ( 'NONE', ( -2.449293598294553600E-016, 1.000000000000000000, -8.551662891793383000E-031 ) ) ; +#3494 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3495 = ORIENTED_EDGE ( 'NONE', *, *, #1744, .T. ) ; +#3496 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#3497 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995700, 1.249999999999992700, 77.50000000000001400 ) ) ; +#3498 = FACE_OUTER_BOUND ( 'NONE', #1842, .T. ) ; +#3499 = VERTEX_POINT ( 'NONE', #4359 ) ; +#3500 = EDGE_CURVE ( 'NONE', #3810, #1386, #3360, .T. ) ; +#3501 = EDGE_CURVE ( 'NONE', #4361, #2239, #2225, .T. ) ; +#3502 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.940206225469880900, 10.46841981887819600 ) ) ; +#3503 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3504 = VECTOR ( 'NONE', #425, 1000.000000000000000 ) ; +#3505 = FACE_OUTER_BOUND ( 'NONE', #1778, .T. ) ; +#3506 = CIRCLE ( 'NONE', #3628, 2.500000000000002200 ) ; +#3507 = ADVANCED_FACE ( 'NONE', ( #3498 ), #3510, .F. ) ; +#3508 = LINE ( 'NONE', #636, #2373 ) ; +#3509 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 5.928593550334433700E-014, 8.936314941956774400E-029 ) ) ; +#3510 = PLANE ( 'NONE', #298 ) ; +#3511 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3512 = EDGE_LOOP ( 'NONE', ( #5333, #3978, #316, #3825 ) ) ; +#3513 = LINE ( 'NONE', #5163, #3379 ) ; +#3514 = AXIS2_PLACEMENT_3D ( 'NONE', #405, #383, #343 ) ; +#3515 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3516 = CARTESIAN_POINT ( 'NONE', ( 35.00045493925136200, -9.056265010053593300, 75.02834858604767000 ) ) ; +#3517 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 6.661338147750936700E-014, 1.301042606982605100E-015 ) ) ; +#3518 = AXIS2_PLACEMENT_3D ( 'NONE', #3797, #1236, #4244 ) ; +#3519 = FACE_OUTER_BOUND ( 'NONE', #5496, .T. ) ; +#3520 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -35.00000000000000000, -3.035766082959412800E-015 ) ) ; +#3521 = AXIS2_PLACEMENT_3D ( 'NONE', #3378, #803, #3802 ) ; +#3522 = CARTESIAN_POINT ( 'NONE', ( 0.3282560712543766700, -9.979533602320772800, 76.25047654481412000 ) ) ; +#3523 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3524 = ORIENTED_EDGE ( 'NONE', *, *, #5103, .F. ) ; +#3525 = EDGE_CURVE ( 'NONE', #110, #3265, #3225, .T. ) ; +#3526 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3527 = EDGE_CURVE ( 'NONE', #931, #47, #4373, .T. ) ; +#3528 = VERTEX_POINT ( 'NONE', #936 ) ; +#3529 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999994300, 10.00000000000002000, 68.75000000000001400 ) ) ; +#3530 = ORIENTED_EDGE ( 'NONE', *, *, #3171, .T. ) ; +#3531 = EDGE_LOOP ( 'NONE', ( #1721, #2279, #464, #486, #3992, #512 ) ) ; +#3532 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 1.483716553776766300, 2.837673297674842700 ) ) ; +#3533 = ADVANCED_FACE ( 'NONE', ( #4500 ), #3091, .F. ) ; +#3534 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -35.00000000000000000, 33.80000000000000400 ) ) ; +#3535 = ORIENTED_EDGE ( 'NONE', *, *, #3679, .T. ) ; +#3536 = EDGE_CURVE ( 'NONE', #1055, #924, #4236, .T. ) ; +#3537 = VERTEX_POINT ( 'NONE', #83 ) ; +#3538 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3539 = CARTESIAN_POINT ( 'NONE', ( 2.123315995107443800, -8.831174585581338800, 77.47367951980376700 ) ) ; +#3540 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -35.00000000000000700, 61.20000000000000300 ) ) ; +#3541 = FACE_OUTER_BOUND ( 'NONE', #4374, .T. ) ; +#3542 = ORIENTED_EDGE ( 'NONE', *, *, #2901, .T. ) ; +#3543 = VERTEX_POINT ( 'NONE', #102 ) ; +#3544 = ORIENTED_EDGE ( 'NONE', *, *, #1112, .T. ) ; +#3545 = CARTESIAN_POINT ( 'NONE', ( -1.530808498933859800E-016, 3.750000000000000900, 77.50000000000001400 ) ) ; +#3546 = AXIS2_PLACEMENT_3D ( 'NONE', #2794, #2747, #2735 ) ; +#3547 = VECTOR ( 'NONE', #661, 1000.000000000000000 ) ; +#3548 = ORIENTED_EDGE ( 'NONE', *, *, #720, .F. ) ; +#3549 = ORIENTED_EDGE ( 'NONE', *, *, #5489, .T. ) ; +#3550 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#3551 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -10.00000000000001100, 78.75000000000001400 ) ) ; +#3552 = AXIS2_PLACEMENT_3D ( 'NONE', #2291, #540, #2718 ) ; +#3553 = ORIENTED_EDGE ( 'NONE', *, *, #794, .F. ) ; +#3554 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, 8.378956808482568500, 12.80878282053913600 ) ) ; +#3555 = ORIENTED_EDGE ( 'NONE', *, *, #4981, .T. ) ; +#3556 = VECTOR ( 'NONE', #1489, 1000.000000000000000 ) ; +#3557 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.224646799147276800E-016, 0.0000000000000000000 ) ) ; +#3558 = AXIS2_PLACEMENT_3D ( 'NONE', #4797, #5216, #4387 ) ; +#3559 = EDGE_LOOP ( 'NONE', ( #3471, #4204, #4343, #4555 ) ) ; +#3560 = ORIENTED_EDGE ( 'NONE', *, *, #1848, .F. ) ; +#3561 = LINE ( 'NONE', #5344, #1284 ) ; +#3562 = CARTESIAN_POINT ( 'NONE', ( 4.340162948437304300E-016, -20.50000000000000400, 1.035533905932739100 ) ) ; +#3563 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#3564 = ADVANCED_FACE ( 'NONE', ( #2081 ), #5334, .T. ) ; +#3565 = LINE ( 'NONE', #360, #2430 ) ; +#3566 = ORIENTED_EDGE ( 'NONE', *, *, #2312, .T. ) ; +#3567 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#3568 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -35.00100000000001900, 55.00000000000000700 ) ) ; +#3569 = PLANE ( 'NONE', #194 ) ; +#3570 = CARTESIAN_POINT ( 'NONE', ( 9.950000000000001100, -32.40000000000000600, 35.00000000000000000 ) ) ; +#3571 = EDGE_CURVE ( 'NONE', #1910, #4169, #1951, .T. ) ; +#3572 = CYLINDRICAL_SURFACE ( 'NONE', #1790, 5.050800000000001500 ) ; +#3573 = VERTEX_POINT ( 'NONE', #530 ) ; +#3574 = EDGE_CURVE ( 'NONE', #2472, #3141, #4098, .T. ) ; +#3575 = CARTESIAN_POINT ( 'NONE', ( 34.74776692697521000, -9.987243147919498300, 76.09432346314810000 ) ) ; +#3576 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 3.645280926927001000, 1.193323607397631000 ) ) ; +#3577 = CIRCLE ( 'NONE', #93, 5.050799999999998000 ) ; +#3578 = VECTOR ( 'NONE', #2831, 1000.000000000000000 ) ; +#3579 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995700, 1.249999999999992700, 80.00000000000001400 ) ) ; +#3580 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999996400, -4.999999999999982200, 77.50000000000001400 ) ) ; +#3581 = CIRCLE ( 'NONE', #3870, 3.189999999999998600 ) ; +#3582 = EDGE_CURVE ( 'NONE', #4604, #1348, #5213, .T. ) ; +#3583 = VERTEX_POINT ( 'NONE', #122 ) ; +#3584 = AXIS2_PLACEMENT_3D ( 'NONE', #4337, #1762, #4761 ) ; +#3585 = LINE ( 'NONE', #678, #3175 ) ; +#3586 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3587 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3588 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3589 = ADVANCED_FACE ( 'NONE', ( #802 ), #657, .T. ) ; +#3590 = LINE ( 'NONE', #1288, #1310 ) ; +#3591 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 3.747870290738131200, 4.558696041394485500 ) ) ; +#3592 = AXIS2_PLACEMENT_3D ( 'NONE', #1170, #748, #3757 ) ; +#3593 = EDGE_LOOP ( 'NONE', ( #5332, #3417, #238, #4015 ) ) ; +#3594 = DIRECTION ( 'NONE', ( -1.000000000000000000, 7.347880794884347500E-016, 0.0000000000000000000 ) ) ; +#3595 = ORIENTED_EDGE ( 'NONE', *, *, #3983, .F. ) ; +#3596 = EDGE_CURVE ( 'NONE', #1626, #4052, #5080, .T. ) ; +#3597 = ORIENTED_EDGE ( 'NONE', *, *, #1234, .T. ) ; +#3598 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3599 = EDGE_CURVE ( 'NONE', #324, #4948, #1811, .T. ) ; +#3600 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -20.50000000000000400, 2.500000000000001300 ) ) ; +#3601 = ORIENTED_EDGE ( 'NONE', *, *, #762, .T. ) ; +#3602 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3857, #853, #4726, #2166, #5132, #2595, #13, #3018, #440, #3449, #877, #3875, #1312, #4318, #1739, #4739, #2183, #5155 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.001127151740952618800, 0.001648484797538214500, 0.002169817854123810000, 0.002691150910709406100, 0.003212483967295001400, 0.003733817023880597500, 0.004255150080466192800, 0.004776483137051789000, 0.005297816193637384200 ), + .UNSPECIFIED. ) ; +#3603 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, 18.28184403566698200, 58.79999999999999700 ) ) ; +#3604 = ORIENTED_EDGE ( 'NONE', *, *, #2151, .T. ) ; +#3605 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 10.05084256353486800, 10.28189984176127300 ) ) ; +#3606 = EDGE_LOOP ( 'NONE', ( #2480, #3142 ) ) ; +#3607 = LINE ( 'NONE', #382, #168 ) ; +#3608 = ORIENTED_EDGE ( 'NONE', *, *, #2287, .T. ) ; +#3609 = CARTESIAN_POINT ( 'NONE', ( -7.199102425303746900E-014, -7.500000000000009800, 78.75000000000001400 ) ) ; +#3610 = EDGE_LOOP ( 'NONE', ( #4372, #3333, #973, #109, #1508 ) ) ; +#3611 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.387778780781442500E-015, 0.0000000000000000000 ) ) ; +#3612 = ORIENTED_EDGE ( 'NONE', *, *, #4155, .F. ) ; +#3613 = ADVANCED_FACE ( 'NONE', ( #524 ), #1851, .F. ) ; +#3614 = LINE ( 'NONE', #2112, #2482 ) ; +#3615 = VERTEX_POINT ( 'NONE', #5275 ) ; +#3616 = AXIS2_PLACEMENT_3D ( 'NONE', #1877, #1868, #1853 ) ; +#3617 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3618 = ORIENTED_EDGE ( 'NONE', *, *, #4676, .F. ) ; +#3619 = ORIENTED_EDGE ( 'NONE', *, *, #2379, .T. ) ; +#3620 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#3621 = LINE ( 'NONE', #2141, #181 ) ; +#3622 = AXIS2_PLACEMENT_3D ( 'NONE', #583, #170, #3184 ) ; +#3623 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -8.750000000000012400, 78.75000000000001400 ) ) ; +#3624 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 11.02545442460521800, 12.85420104518762800 ) ) ; +#3625 = VERTEX_POINT ( 'NONE', #1026 ) ; +#3626 = FACE_OUTER_BOUND ( 'NONE', #1269, .T. ) ; +#3627 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -6.736790197968178700E-017 ) ) ; +#3628 = AXIS2_PLACEMENT_3D ( 'NONE', #1768, #4766, #2205 ) ; +#3629 = CYLINDRICAL_SURFACE ( 'NONE', #1106, 1.199999999999999700 ) ; +#3630 = VECTOR ( 'NONE', #212, 1000.000000000000000 ) ; +#3631 = CYLINDRICAL_SURFACE ( 'NONE', #3052, 1.199999999999992600 ) ; +#3632 = CARTESIAN_POINT ( 'NONE', ( 34.63214864235385400, -15.00000000000000900, 76.30535135764616000 ) ) ; +#3633 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.673617379884035500E-017, -1.000000000000000000 ) ) ; +#3634 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -12.55080000000001100, 22.10328947826994300 ) ) ; +#3635 = VECTOR ( 'NONE', #991, 1000.000000000000000 ) ; +#3636 = EDGE_CURVE ( 'NONE', #5363, #623, #4956, .T. ) ; +#3637 = ADVANCED_FACE ( 'NONE', ( #3827 ), #397, .F. ) ; +#3638 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3639 = ORIENTED_EDGE ( 'NONE', *, *, #4063, .F. ) ; +#3640 = FACE_BOUND ( 'NONE', #4464, .T. ) ; +#3641 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.224646799147275600E-016, 0.0000000000000000000 ) ) ; +#3642 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -2.220446049250313400E-014, 80.00000000000001400 ) ) ; +#3643 = CARTESIAN_POINT ( 'NONE', ( 13.00000000000000200, -30.00000000000001100, 72.50000000000001400 ) ) ; +#3644 = TOROIDAL_SURFACE ( 'NONE', #5413, 1.250000000000002200, 1.250000000000000000 ) ; +#3645 = EDGE_CURVE ( 'NONE', #2867, #5401, #1544, .T. ) ; +#3646 = AXIS2_PLACEMENT_3D ( 'NONE', #2574, #5522, #2996 ) ; +#3647 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995700, -16.25000000000000700, 75.00000000000001400 ) ) ; +#3648 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -13.63795574274766600, 21.10709478017819100 ) ) ; +#3649 = EDGE_LOOP ( 'NONE', ( #2284, #4885, #2550, #858, #437, #1434, #1178, #1145, #2288, #1479, #1927, #248 ) ) ; +#3650 = AXIS2_PLACEMENT_3D ( 'NONE', #4972, #267, #2858 ) ; +#3651 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -35.00000000000000700, 60.00000000000000000 ) ) ; +#3652 = EDGE_LOOP ( 'NONE', ( #3418, #5007, #1507 ) ) ; +#3653 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -6.938893903907228400E-015, 75.00000000000001400 ) ) ; +#3654 = EDGE_LOOP ( 'NONE', ( #572, #5055, #179, #3815, #5244 ) ) ; +#3655 = ORIENTED_EDGE ( 'NONE', *, *, #1695, .T. ) ; +#3656 = PLANE ( 'NONE', #548 ) ; +#3657 = ORIENTED_EDGE ( 'NONE', *, *, #3571, .T. ) ; +#3658 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3659 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#3660 = ORIENTED_EDGE ( 'NONE', *, *, #4919, .T. ) ; +#3661 = EDGE_CURVE ( 'NONE', #4554, #2489, #2699, .T. ) ; +#3662 = ORIENTED_EDGE ( 'NONE', *, *, #1275, .T. ) ; +#3663 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3664 = EDGE_CURVE ( 'NONE', #180, #1025, #4826, .T. ) ; +#3665 = LINE ( 'NONE', #2340, #4683 ) ; +#3666 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 14.28411609453361900, 27.65513558924598000 ) ) ; +#3667 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -30.00000000000000000, 80.00000000000000000 ) ) ; +#3668 = VERTEX_POINT ( 'NONE', #2763 ) ; +#3669 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.673617379884035500E-017, -1.000000000000000000 ) ) ; +#3670 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3671 = VERTEX_POINT ( 'NONE', #2347 ) ; +#3672 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9961946980917455500, -0.08715574274765822100 ) ) ; +#3673 = ORIENTED_EDGE ( 'NONE', *, *, #2816, .T. ) ; +#3674 = LINE ( 'NONE', #4065, #4810 ) ; +#3675 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3676 = ORIENTED_EDGE ( 'NONE', *, *, #4059, .F. ) ; +#3677 = ORIENTED_EDGE ( 'NONE', *, *, #1765, .T. ) ; +#3678 = ORIENTED_EDGE ( 'NONE', *, *, #2024, .F. ) ; +#3679 = EDGE_CURVE ( 'NONE', #117, #2139, #5395, .T. ) ; +#3680 = VECTOR ( 'NONE', #4443, 1000.000000000000000 ) ; +#3681 = ORIENTED_EDGE ( 'NONE', *, *, #9, .F. ) ; +#3682 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#3683 = ORIENTED_EDGE ( 'NONE', *, *, #1982, .F. ) ; +#3684 = EDGE_LOOP ( 'NONE', ( #1458, #4216 ) ) ; +#3685 = VECTOR ( 'NONE', #1063, 1000.000000000000000 ) ; +#3686 = AXIS2_PLACEMENT_3D ( 'NONE', #4173, #1164, #3725 ) ; +#3687 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 9.459599109171156400, 16.10642498202997800 ) ) ; +#3688 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3689 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995000, 3.750000000000024900, 77.50000000000001400 ) ) ; +#3690 = DATE_AND_TIME ( #4831, #400 ) ; +#3691 = FACE_OUTER_BOUND ( 'NONE', #1319, .T. ) ; +#3692 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -2.775557561562891400E-016, 1.000000000000000000 ) ) ; +#3693 = AXIS2_PLACEMENT_3D ( 'NONE', #3568, #1011, #4003 ) ; +#3694 = VECTOR ( 'NONE', #1499, 1000.000000000000000 ) ; +#3695 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999996400, -6.249999999999978700, 77.50000000000001400 ) ) ; +#3696 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -12.55080000000000100, 79.99999999999997200 ) ) ; +#3697 = CIRCLE ( 'NONE', #4525, 1.250000000000001100 ) ; +#3698 = EDGE_CURVE ( 'NONE', #3083, #20, #1415, .T. ) ; +#3699 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3700 = CIRCLE ( 'NONE', #4316, 1.250000000000001100 ) ; +#3701 = EDGE_CURVE ( 'NONE', #2358, #112, #2828, .T. ) ; +#3702 = CARTESIAN_POINT ( 'NONE', ( 34.74776692697521000, -9.987243147919498300, 76.09432346314810000 ) ) ; +#3703 = VECTOR ( 'NONE', #3266, 1000.000000000000000 ) ; +#3704 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 8.423631890169604100, 6.866213076929877700 ) ) ; +#3705 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -14.99100622546988300, 21.20617812313072300 ) ) ; +#3706 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.999999999999994700, 68.75000000000001400 ) ) ; +#3707 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3708 = VERTEX_POINT ( 'NONE', #4085 ) ; +#3709 = EDGE_CURVE ( 'NONE', #621, #924, #2423, .T. ) ; +#3710 = CARTESIAN_POINT ( 'NONE', ( 2.409185671430223800, -6.809992578160913200, 77.49861212917967600 ) ) ; +#3711 = CIRCLE ( 'NONE', #3616, 1.250000000000000000 ) ; +#3712 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#3713 = FACE_BOUND ( 'NONE', #3606, .T. ) ; +#3714 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3715 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#3716 = ORIENTED_EDGE ( 'NONE', *, *, #1191, .F. ) ; +#3717 = AXIS2_PLACEMENT_3D ( 'NONE', #1187, #4193, #1617 ) ; +#3718 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -12.55080000000001000, 22.10328947826994300 ) ) ; +#3719 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 5.547490537191190000, 2.819730596105356000 ) ) ; +#3720 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -7.500000000000003600, 67.00000000000001400 ) ) ; +#3721 = EDGE_LOOP ( 'NONE', ( #2191, #4075, #1337, #4114 ) ) ; +#3722 = AXIS2_PLACEMENT_3D ( 'NONE', #3324, #745, #3753 ) ; +#3723 = CARTESIAN_POINT ( 'NONE', ( 0.3285863468998965800, -5.020499891164228700, 76.25115493899807000 ) ) ; +#3724 = VERTEX_POINT ( 'NONE', #2383 ) ; +#3725 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3726 = CARTESIAN_POINT ( 'NONE', ( 34.99921218345434000, 0.8232360170258975500, 75.07191478294240000 ) ) ; +#3727 = ORIENTED_EDGE ( 'NONE', *, *, #1355, .T. ) ; +#3728 = FACE_BOUND ( 'NONE', #4233, .T. ) ; +#3729 = ORIENTED_EDGE ( 'NONE', *, *, #5428, .T. ) ; +#3730 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -35.00000000000000700, 55.50000000000000700 ) ) ; +#3731 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3732 = ORIENTED_EDGE ( 'NONE', *, *, #3126, .F. ) ; +#3733 = VECTOR ( 'NONE', #342, 1000.000000000000000 ) ; +#3734 = ORIENTED_EDGE ( 'NONE', *, *, #398, .F. ) ; +#3735 = EDGE_CURVE ( 'NONE', #996, #1828, #3561, .T. ) ; +#3736 = ORIENTED_EDGE ( 'NONE', *, *, #2424, .F. ) ; +#3737 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3738 = EDGE_CURVE ( 'NONE', #2943, #1474, #2564, .T. ) ; +#3739 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 1.682687753692665400, 2.934554591322184000 ) ) ; +#3740 = ORIENTED_EDGE ( 'NONE', *, *, #4992, .F. ) ; +#3741 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -7.940206225469880900, 10.46841981887819600 ) ) ; +#3742 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -14.55080000000001100, 21.18695830425251000 ) ) ; +#3743 = CYLINDRICAL_SURFACE ( 'NONE', #3155, 2.500000000000002200 ) ; +#3744 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, -15.00000000000000900, 77.50000000000001400 ) ) ; +#3745 = ORIENTED_EDGE ( 'NONE', *, *, #4329, .T. ) ; +#3746 = CARTESIAN_POINT ( 'NONE', ( 2.168404344971008900E-015, 15.00000000000000000, 40.00000000000000700 ) ) ; +#3747 = EDGE_LOOP ( 'NONE', ( #4368, #5298, #3683, #589 ) ) ; +#3748 = ORIENTED_EDGE ( 'NONE', *, *, #5164, .F. ) ; +#3749 = ORIENTED_EDGE ( 'NONE', *, *, #3386, .T. ) ; +#3750 = LINE ( 'NONE', #5112, #2490 ) ; +#3751 = CARTESIAN_POINT ( 'NONE', ( 2.602374448187987800E-015, -18.75000000000000700, 77.50000000000001400 ) ) ; +#3752 = EDGE_CURVE ( 'NONE', #3062, #3404, #126, .T. ) ; +#3753 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3754 = ORIENTED_EDGE ( 'NONE', *, *, #2509, .F. ) ; +#3755 = ORIENTED_EDGE ( 'NONE', *, *, #1553, .F. ) ; +#3756 = CIRCLE ( 'NONE', #2722, 2.500000000000002200 ) ; +#3757 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3758 = AXIS2_PLACEMENT_3D ( 'NONE', #4476, #1907, #4908 ) ; +#3759 = CIRCLE ( 'NONE', #232, 5.050799999999994400 ) ; +#3760 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000007800, -7.500000000000009800, 78.75000000000001400 ) ) ; +#3761 = AXIS2_PLACEMENT_3D ( 'NONE', #953, #546, #3128 ) ; +#3762 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.7940683497930879400, 0.04384325782340122600 ) ) ; +#3763 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 10.00000000000002000, 68.75000000000001400 ) ) ; +#3764 = CARTESIAN_POINT ( 'NONE', ( -1.197381986978685000E-015, 1.162364304199216400, 75.00000000000001400 ) ) ; +#3765 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000007800, -7.500000000000009800, 77.50000000000001400 ) ) ; +#3766 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1517, #4682, ( #3486 ) ) ; +#3767 = VECTOR ( 'NONE', #4529, 1000.000000000000000 ) ; +#3768 = VECTOR ( 'NONE', #4268, 1000.000000000000000 ) ; +#3769 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3770 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 11.58135045785675600, 26.26414088016468200 ) ) ; +#3771 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -35.00000000000000700, 58.79999999999999000 ) ) ; +#3772 = CIRCLE ( 'NONE', #3761, 2.500000000000002200 ) ; +#3773 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#3774 = ORIENTED_EDGE ( 'NONE', *, *, #1376, .T. ) ; +#3775 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412000E-015, 10.12269286757286800, 18.66691764981290900 ) ) ; +#3776 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#3777 = EDGE_CURVE ( 'NONE', #3429, #784, #4566, .T. ) ; +#3778 = FACE_OUTER_BOUND ( 'NONE', #1193, .T. ) ; +#3779 = EDGE_CURVE ( 'NONE', #4556, #4020, #2032, .T. ) ; +#3780 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3781 = LINE ( 'NONE', #3842, #4783 ) ; +#3782 = ADVANCED_FACE ( 'NONE', ( #5527 ), #255, .T. ) ; +#3783 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, 9.999999999999994700, 68.75000000000001400 ) ) ; +#3784 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000700, 10.07270266587591400, 10.32995062708518800 ) ) ; +#3785 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 11.85275822285952600, 15.46147845250009900 ) ) ; +#3786 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3787 = ORIENTED_EDGE ( 'NONE', *, *, #5194, .T. ) ; +#3788 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#3789 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3790 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 3.747870289260811100, 4.558696042748955800 ) ) ; +#3791 = ORIENTED_EDGE ( 'NONE', *, *, #2892, .T. ) ; +#3792 = ORIENTED_EDGE ( 'NONE', *, *, #627, .F. ) ; +#3793 = EDGE_LOOP ( 'NONE', ( #1883, #2931 ) ) ; +#3794 = EDGE_LOOP ( 'NONE', ( #5136, #3262, #1053 ) ) ; +#3795 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#3796 = PERSON_AND_ORGANIZATION ( #5121, #5438 ) ; +#3797 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 9.999999999999994700, 68.75000000000001400 ) ) ; +#3798 = ORIENTED_EDGE ( 'NONE', *, *, #3855, .T. ) ; +#3799 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3800 = AXIS2_PLACEMENT_3D ( 'NONE', #1991, #5006, #2465 ) ; +#3801 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999996400, -4.999999999999982200, 77.50000000000001400 ) ) ; +#3802 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3803 = CARTESIAN_POINT ( 'NONE', ( 32.49999999999999300, 3.589451079374214300, 1.147846807726917100 ) ) ; +#3804 = CIRCLE ( 'NONE', #3115, 1.250000000000002200 ) ; +#3805 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#3806 = ORIENTED_EDGE ( 'NONE', *, *, #2379, .F. ) ; +#3807 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3808 = ORIENTED_EDGE ( 'NONE', *, *, #3574, .F. ) ; +#3809 = EDGE_CURVE ( 'NONE', #1729, #3083, #4874, .T. ) ; +#3810 = VERTEX_POINT ( 'NONE', #690 ) ; +#3811 = EDGE_CURVE ( 'NONE', #2473, #2410, #1140, .T. ) ; +#3812 = FACE_OUTER_BOUND ( 'NONE', #766, .T. ) ; +#3813 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3814 = ADVANCED_FACE ( 'NONE', ( #4435 ), #2290, .T. ) ; +#3815 = ORIENTED_EDGE ( 'NONE', *, *, #3574, .T. ) ; +#3816 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3817 = APPROVAL_ROLE ( '' ) ; +#3818 = ORIENTED_EDGE ( 'NONE', *, *, #2091, .T. ) ; +#3819 = ORIENTED_EDGE ( 'NONE', *, *, #4678, .T. ) ; +#3820 = LINE ( 'NONE', #114, #2693 ) ; +#3821 = EDGE_CURVE ( 'NONE', #1531, #4080, #1003, .T. ) ; +#3822 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3823 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -6.736790197968178700E-017 ) ) ; +#3824 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, -7.765472646487094200E-015, 77.50000000000001400 ) ) ; +#3825 = ORIENTED_EDGE ( 'NONE', *, *, #474, .T. ) ; +#3826 = ORIENTED_EDGE ( 'NONE', *, *, #2576, .F. ) ; +#3827 = FACE_OUTER_BOUND ( 'NONE', #1314, .T. ) ; +#3828 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3829 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, -15.00000000000000900, 78.75000000000001400 ) ) ; +#3830 = VECTOR ( 'NONE', #4922, 1000.000000000000000 ) ; +#3831 = AXIS2_PLACEMENT_3D ( 'NONE', #1692, #1670, #1642 ) ; +#3832 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000003100, 0.4832074174847456600, 5.095750210681872400E-015 ) ) ; +#3833 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3834 = AXIS2_PLACEMENT_3D ( 'NONE', #2732, #1865, #4017 ) ; +#3835 = LINE ( 'NONE', #2805, #132 ) ; +#3836 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891400E-016, -1.000000000000000000 ) ) ; +#3837 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #699, #4975, #5380, #3710, #1148, #4147, #1573, #4581, #2010, #4987, #2450, #5404, #2878, #288, #3303, #721, #3723, #1162 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 1.140836248210248900E-017, 0.0005216237795876886000, 0.001043247559175365900, 0.001564871338763043200, 0.002086495118350720100, 0.002608118897938397200, 0.003129742677526074800, 0.003651366457113751900, 0.004172990236701429000 ), + .UNSPECIFIED. ) ; +#3838 = LINE ( 'NONE', #1199, #1424 ) ; +#3839 = AXIS2_PLACEMENT_3D ( 'NONE', #2107, #821, #4672 ) ; +#3840 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 8.786796564403577000, 0.0000000000000000000 ) ) ; +#3841 = CARTESIAN_POINT ( 'NONE', ( 33.44453203835428900, -9.464357888013628500, 77.31844400217565300 ) ) ; +#3842 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -13.63795574274766600, 21.10709478017819100 ) ) ; +#3843 = ADVANCED_FACE ( 'NONE', ( #3289 ), #5268, .T. ) ; +#3844 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3845 = CIRCLE ( 'NONE', #1855, 1.199999999999999700 ) ; +#3846 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999930300, -7.500000000000009800, 77.50000000000001400 ) ) ; +#3847 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3848 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -16.25000000000000700, 78.75000000000001400 ) ) ; +#3849 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#3850 = ORIENTED_EDGE ( 'NONE', *, *, #2787, .F. ) ; +#3851 = FACE_OUTER_BOUND ( 'NONE', #4861, .T. ) ; +#3852 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000004400, 7.483958049705274900, 5.293615977541576500 ) ) ; +#3853 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3854 = EDGE_CURVE ( 'NONE', #2140, #2139, #871, .T. ) ; +#3855 = EDGE_CURVE ( 'NONE', #3468, #5267, #2015, .T. ) ; +#3856 = LINE ( 'NONE', #1901, #2720 ) ; +#3857 = CARTESIAN_POINT ( 'NONE', ( 34.74776692697534500, -5.012756852080509700, 76.09432346314783000 ) ) ; +#3858 = ORIENTED_EDGE ( 'NONE', *, *, #4299, .F. ) ; +#3859 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -14.99100622546988300, 16.15537812313072400 ) ) ; +#3860 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -24.99999999999997900, 68.75000000000001400 ) ) ; +#3861 = EDGE_CURVE ( 'NONE', #1609, #3708, #3154, .T. ) ; +#3862 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#3863 = EDGE_LOOP ( 'NONE', ( #1107, #1111, #4008, #2068 ) ) ; +#3864 = AXIS2_PLACEMENT_3D ( 'NONE', #2643, #51, #3057 ) ; +#3865 = ORIENTED_EDGE ( 'NONE', *, *, #4721, .F. ) ; +#3866 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000003600, 14.18028838247028900, 26.81229888810852900 ) ) ; +#3867 = ADVANCED_FACE ( 'NONE', ( #5396 ), #2889, .F. ) ; +#3868 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 7.401832492273379100, 10.44567691272306000 ) ) ; +#3869 = ORIENTED_EDGE ( 'NONE', *, *, #5403, .F. ) ; +#3870 = AXIS2_PLACEMENT_3D ( 'NONE', #1103, #1091, #2972 ) ; +#3871 = LINE ( 'NONE', #4194, #2736 ) ; +#3872 = ORIENTED_EDGE ( 'NONE', *, *, #1506, .F. ) ; +#3873 = ORIENTED_EDGE ( 'NONE', *, *, #4538, .F. ) ; +#3874 = PLANE ( 'NONE', #5342 ) ; +#3875 = CARTESIAN_POINT ( 'NONE', ( 32.87668400489258100, -6.168825414418637200, 77.47367951980376700 ) ) ; +#3876 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.387778780781442500E-015, 0.0000000000000000000 ) ) ; +#3877 = CYLINDRICAL_SURFACE ( 'NONE', #2665, 3.189999999999998600 ) ; +#3878 = EDGE_LOOP ( 'NONE', ( #1060, #5071, #4213, #4602 ) ) ; +#3879 = ORIENTED_EDGE ( 'NONE', *, *, #3432, .T. ) ; +#3880 = ORIENTED_EDGE ( 'NONE', *, *, #1017, .T. ) ; +#3881 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, -7.765472646487094200E-015, 77.50000000000001400 ) ) ; +#3882 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#3883 = ORIENTED_EDGE ( 'NONE', *, *, #3397, .T. ) ; +#3884 = CARTESIAN_POINT ( 'NONE', ( 0.1739476260330367600, -15.04427987841306400, 75.91995117316854200 ) ) ; +#3885 = LINE ( 'NONE', #3696, #1596 ) ; +#3886 = ORIENTED_EDGE ( 'NONE', *, *, #3241, .T. ) ; +#3887 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.387778780781442500E-015, 0.0000000000000000000 ) ) ; +#3888 = EDGE_CURVE ( 'NONE', #20, #554, #5147, .T. ) ; +#3889 = VERTEX_POINT ( 'NONE', #5021 ) ; +#3890 = EDGE_CURVE ( 'NONE', #4474, #124, #4016, .T. ) ; +#3891 = ORIENTED_EDGE ( 'NONE', *, *, #2137, .F. ) ; +#3892 = ORIENTED_EDGE ( 'NONE', *, *, #4608, .T. ) ; +#3893 = FACE_OUTER_BOUND ( 'NONE', #990, .T. ) ; +#3894 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 15.00000000000000000, 40.00000000000001400 ) ) ; +#3895 = ORIENTED_EDGE ( 'NONE', *, *, #903, .T. ) ; +#3896 = LINE ( 'NONE', #5507, #4764 ) ; +#3897 = ORIENTED_EDGE ( 'NONE', *, *, #3248, .T. ) ; +#3898 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -32.50000000000000700, 55.00000000000000700 ) ) ; +#3899 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3900 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3901 = ADVANCED_FACE ( 'NONE', ( #1742 ), #3022, .T. ) ; +#3902 = LINE ( 'NONE', #779, #2770 ) ; +#3903 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 15.00000000000000400, 16.56854249492381500 ) ) ; +#3904 = CARTESIAN_POINT ( 'NONE', ( 0.07785841796038311900, 13.13070237256533300, 69.45976545616825600 ) ) ; +#3905 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999996400, -19.99999999999998200, 75.00000000000001400 ) ) ; +#3906 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3907 = FACE_OUTER_BOUND ( 'NONE', #50, .T. ) ; +#3908 = FACE_OUTER_BOUND ( 'NONE', #1599, .T. ) ; +#3909 = AXIS2_PLACEMENT_3D ( 'NONE', #2710, #2560, #2519 ) ; +#3910 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3911 = CARTESIAN_POINT ( 'NONE', ( 13.00000000000000200, -32.50000000000000700, 55.00000000000000700 ) ) ; +#3912 = AXIS2_PLACEMENT_3D ( 'NONE', #2784, #190, #3205 ) ; +#3913 = CIRCLE ( 'NONE', #4347, 1.250000000000002200 ) ; +#3914 = EDGE_LOOP ( 'NONE', ( #2629, #4133 ) ) ; +#3915 = DIRECTION ( 'NONE', ( 1.224646799147276800E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#3916 = AXIS2_PLACEMENT_3D ( 'NONE', #923, #3923, #1361 ) ; +#3917 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.734723475976805600E-016, 0.0000000000000000000 ) ) ; +#3918 = CIRCLE ( 'NONE', #221, 1.199999999999992600 ) ; +#3919 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -23.00000000000000400, 2.500000000000000000 ) ) ; +#3920 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3921 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -14.99100622546988300, 16.15537812313072400 ) ) ; +#3922 = FACE_OUTER_BOUND ( 'NONE', #3610, .T. ) ; +#3923 = DIRECTION ( 'NONE', ( 1.224646799147353200E-016, 1.499759782661764000E-032, 1.000000000000000000 ) ) ; +#3924 = ADVANCED_FACE ( 'NONE', ( #3893 ), #1603, .F. ) ; +#3925 = EDGE_LOOP ( 'NONE', ( #5372, #2073, #704, #2323 ) ) ; +#3926 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -7.500000000000003600, 67.00000000000001400 ) ) ; +#3927 = EDGE_CURVE ( 'NONE', #4058, #3277, #726, .T. ) ; +#3928 = EDGE_LOOP ( 'NONE', ( #4824, #3716, #5201, #993 ) ) ; +#3929 = ORIENTED_EDGE ( 'NONE', *, *, #239, .T. ) ; +#3930 = ORIENTED_EDGE ( 'NONE', *, *, #672, .F. ) ; +#3931 = ORIENTED_EDGE ( 'NONE', *, *, #3239, .F. ) ; +#3932 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#3933 = ORIENTED_EDGE ( 'NONE', *, *, #411, .F. ) ; +#3934 = CARTESIAN_POINT ( 'NONE', ( 36.24999999999996400, -6.249999999999980500, 77.50000000000001400 ) ) ; +#3935 = EDGE_CURVE ( 'NONE', #2874, #5079, #5012, .T. ) ; +#3936 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3937 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3938 = ORIENTED_EDGE ( 'NONE', *, *, #4404, .T. ) ; +#3939 = AXIS2_PLACEMENT_3D ( 'NONE', #831, #3836, #1278 ) ; +#3940 = CIRCLE ( 'NONE', #1681, 3.189999999999998600 ) ; +#3941 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -2.449200000000003800, 67.00000000000001400 ) ) ; +#3942 = VERTEX_POINT ( 'NONE', #1638 ) ; +#3943 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3944 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3945 = ORIENTED_EDGE ( 'NONE', *, *, #2957, .T. ) ; +#3946 = AXIS2_PLACEMENT_3D ( 'NONE', #4126, #1121, #3246 ) ; +#3947 = ORIENTED_EDGE ( 'NONE', *, *, #4040, .F. ) ; +#3948 = CIRCLE ( 'NONE', #1031, 3.189999999999998600 ) ; +#3949 = ORIENTED_EDGE ( 'NONE', *, *, #2098, .F. ) ; +#3950 = ORIENTED_EDGE ( 'NONE', *, *, #1621, .F. ) ; +#3951 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -8.673617379884035500E-017, 1.000000000000000000 ) ) ; +#3952 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, -25.00000000000000000, 67.55000000000002600 ) ) ; +#3953 = ORIENTED_EDGE ( 'NONE', *, *, #2382, .F. ) ; +#3954 = ORIENTED_EDGE ( 'NONE', *, *, #1010, .T. ) ; +#3955 = ADVANCED_FACE ( 'NONE', ( #466 ), #3354, .F. ) ; +#3956 = FACE_OUTER_BOUND ( 'NONE', #2415, .T. ) ; +#3957 = ORIENTED_EDGE ( 'NONE', *, *, #3809, .F. ) ; +#3958 = ORIENTED_EDGE ( 'NONE', *, *, #3962, .T. ) ; +#3959 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999996400, -6.249999999999982200, 77.50000000000001400 ) ) ; +#3960 = VECTOR ( 'NONE', #3598, 1000.000000000000000 ) ; +#3961 = EDGE_CURVE ( 'NONE', #1992, #784, #2757, .T. ) ; +#3962 = EDGE_CURVE ( 'NONE', #1114, #3468, #2630, .T. ) ; +#3963 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000001400, 2.062396942974287200, 3.148378385584569700 ) ) ; +#3964 = FACE_OUTER_BOUND ( 'NONE', #222, .T. ) ; +#3965 = LINE ( 'NONE', #3603, #535 ) ; +#3966 = CARTESIAN_POINT ( 'NONE', ( 2.353815494508181500, -8.360240897423448600, 77.49674497874245600 ) ) ; +#3967 = EDGE_CURVE ( 'NONE', #1386, #4556, #3437, .T. ) ; +#3968 = VECTOR ( 'NONE', #3669, 1000.000000000000000 ) ; +#3969 = AXIS2_PLACEMENT_3D ( 'NONE', #4243, #1660, #4666 ) ; +#3970 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3971 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#3972 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -2.775557561562891400E-016 ) ) ; +#3973 = CIRCLE ( 'NONE', #1568, 1.250000000000001100 ) ; +#3974 = AXIS2_PLACEMENT_3D ( 'NONE', #2606, #4798, #1807 ) ; +#3975 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 9.917327502918183800, 17.78653369416052500 ) ) ; +#3976 = ADVANCED_FACE ( 'NONE', ( #1476 ), #2096, .F. ) ; +#3977 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959447900E-015, 4.995888022966115100, 2.279757746124710500 ) ) ; +#3978 = ORIENTED_EDGE ( 'NONE', *, *, #4858, .F. ) ; +#3979 = AXIS2_PLACEMENT_3D ( 'NONE', #4496, #1921, #4917 ) ; +#3980 = LINE ( 'NONE', #2406, #4976 ) ; +#3981 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3982 = FACE_OUTER_BOUND ( 'NONE', #3794, .T. ) ; +#3983 = EDGE_CURVE ( 'NONE', #2813, #1366, #4759, .T. ) ; +#3984 = EDGE_CURVE ( 'NONE', #2079, #3287, #3750, .T. ) ; +#3985 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -14.99100622546988300, 16.15537812313072400 ) ) ; +#3986 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3987 = ORIENTED_EDGE ( 'NONE', *, *, #3738, .T. ) ; +#3988 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, -7.500000000000009800, 75.00000000000001400 ) ) ; +#3989 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 2.254721604894877700, 3.272419897570418600 ) ) ; +#3990 = EDGE_LOOP ( 'NONE', ( #4637, #3740, #3957, #5427, #4492 ) ) ; +#3991 = EDGE_CURVE ( 'NONE', #938, #1626, #3621, .T. ) ; +#3992 = ORIENTED_EDGE ( 'NONE', *, *, #2958, .F. ) ; +#3993 = ORIENTED_EDGE ( 'NONE', *, *, #283, .F. ) ; +#3994 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.387778780781444500E-015, 0.0000000000000000000 ) ) ; +#3995 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#3996 = CIRCLE ( 'NONE', #1860, 1.250000000000002200 ) ; +#3997 = ADVANCED_FACE ( 'NONE', ( #1344 ), #1205, .F. ) ; +#3998 = ORIENTED_EDGE ( 'NONE', *, *, #3991, .T. ) ; +#3999 = ORIENTED_EDGE ( 'NONE', *, *, #4535, .T. ) ; +#4000 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -2.775557561562891400E-016 ) ) ; +#4001 = AXIS2_PLACEMENT_3D ( 'NONE', #3919, #3906, #3900 ) ; +#4002 = VECTOR ( 'NONE', #285, 1000.000000000000000 ) ; +#4003 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#4004 = ORIENTED_EDGE ( 'NONE', *, *, #3033, .T. ) ; +#4005 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999997200, -9.999999999999987600, 77.50000000000001400 ) ) ; +#4006 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #3117, #1812, #3562, #979 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.712388980384689700, 6.283185307179587100 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243648300, 0.8047378541243648300, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#4007 = AXIS2_PLACEMENT_3D ( 'NONE', #4263, #1688, #4697 ) ; +#4008 = ORIENTED_EDGE ( 'NONE', *, *, #4983, .F. ) ; +#4009 = VERTEX_POINT ( 'NONE', #1716 ) ; +#4010 = VECTOR ( 'NONE', #1546, 1000.000000000000000 ) ; +#4011 = ORIENTED_EDGE ( 'NONE', *, *, #4830, .F. ) ; +#4012 = CARTESIAN_POINT ( 'NONE', ( -9.123880713605841700E-014, 5.925226867265075200, 3.240617393167753300 ) ) ; +#4013 = AXIS2_PLACEMENT_3D ( 'NONE', #215, #4951, #2394 ) ; +#4014 = VERTEX_POINT ( 'NONE', #2165 ) ; +#4015 = ORIENTED_EDGE ( 'NONE', *, *, #2721, .T. ) ; +#4016 = CIRCLE ( 'NONE', #5175, 1.250000000000001100 ) ; +#4017 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.224646799147276800E-016, 0.0000000000000000000 ) ) ; +#4018 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -7.500000000000003600, 72.05080000000001000 ) ) ; +#4019 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -12.55080000000000200, 67.00000000000001400 ) ) ; +#4020 = VERTEX_POINT ( 'NONE', #5130 ) ; +#4021 = FACE_OUTER_BOUND ( 'NONE', #511, .T. ) ; +#4022 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4023 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4024 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4025 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4026 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.684197549492044600E-016, 1.000000000000000000 ) ) ; +#4027 = EDGE_CURVE ( 'NONE', #760, #241, #326, .T. ) ; +#4028 = CYLINDRICAL_SURFACE ( 'NONE', #4947, 2.500000000000002200 ) ; +#4029 = EDGE_CURVE ( 'NONE', #3322, #161, #4629, .T. ) ; +#4030 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#4031 = ADVANCED_FACE ( 'NONE', ( #3492 ), #3874, .F. ) ; +#4032 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4033 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -35.00000000000000700, 77.50000000000000000 ) ) ; +#4034 = CYLINDRICAL_SURFACE ( 'NONE', #3839, 2.500000000000000000 ) ; +#4035 = CIRCLE ( 'NONE', #740, 1.250000000000002200 ) ; +#4036 = CARTESIAN_POINT ( 'NONE', ( 37.50099999999998300, -25.50000000000000400, 42.49999999999999300 ) ) ; +#4037 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#4038 = VECTOR ( 'NONE', #3496, 1000.000000000000000 ) ; +#4039 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.684197549492044600E-016, -1.000000000000000000 ) ) ; +#4040 = EDGE_CURVE ( 'NONE', #2824, #5123, #2219, .T. ) ; +#4041 = ORIENTED_EDGE ( 'NONE', *, *, #1589, .F. ) ; +#4042 = AXIS2_PLACEMENT_3D ( 'NONE', #4461, #1460, #4022 ) ; +#4043 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -10.00000000000001100, 77.50000000000001400 ) ) ; +#4044 = CIRCLE ( 'NONE', #4663, 1.199999999999999700 ) ; +#4045 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -32.50000000000000000, 10.00000000000000500 ) ) ; +#4046 = DIRECTION ( 'NONE', ( -1.953992523340277400E-014, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4047 = AXIS2_PLACEMENT_3D ( 'NONE', #2254, #4813, #1820 ) ; +#4048 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4049 = VECTOR ( 'NONE', #4504, 1000.000000000000000 ) ; +#4050 = CARTESIAN_POINT ( 'NONE', ( -1.856885059258939500E-013, 11.02545442440514200, 12.85420104525200300 ) ) ; +#4051 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #2534, #2114, ( #3486 ) ) ; +#4052 = VERTEX_POINT ( 'NONE', #3038 ) ; +#4053 = CARTESIAN_POINT ( 'NONE', ( 1.071565949253891500E-015, -6.250000000000006200, 77.50000000000001400 ) ) ; +#4054 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -32.50000000000000000, 10.00000000000000500 ) ) ; +#4055 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -32.40000000000000600, 36.20000000000000300 ) ) ; +#4056 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 1.684197549492044600E-016 ) ) ; +#4057 = ADVANCED_FACE ( 'NONE', ( #5458 ), #1069, .T. ) ; +#4058 = VERTEX_POINT ( 'NONE', #2613 ) ; +#4059 = EDGE_CURVE ( 'NONE', #4552, #978, #2353, .T. ) ; +#4060 = ORIENTED_EDGE ( 'NONE', *, *, #3752, .T. ) ; +#4061 = CARTESIAN_POINT ( 'NONE', ( 34.79655909979543100, -15.01688035891701600, 76.00187216413979700 ) ) ; +#4062 = VERTEX_POINT ( 'NONE', #2194 ) ; +#4063 = EDGE_CURVE ( 'NONE', #656, #1536, #3352, .T. ) ; +#4064 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -32.50000000000000000, 10.00000000000000500 ) ) ; +#4065 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -24.99999999999997900, 71.94000000000001200 ) ) ; +#4066 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4067 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4068 = ORIENTED_EDGE ( 'NONE', *, *, #145, .T. ) ; +#4069 = LOCAL_TIME ( 17, 42, 40.00000000000000000, #5188 ) ; +#4070 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4071 = VERTEX_POINT ( 'NONE', #2638 ) ; +#4072 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -30.00000000000001100, 72.00000000000001400 ) ) ; +#4073 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#4074 = ORIENTED_EDGE ( 'NONE', *, *, #2721, .F. ) ; +#4075 = ORIENTED_EDGE ( 'NONE', *, *, #5319, .T. ) ; +#4076 = LINE ( 'NONE', #5235, #2942 ) ; +#4077 = VERTEX_POINT ( 'NONE', #3487 ) ; +#4078 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -7.025630077706072700E-015, 77.50000000000001400 ) ) ; +#4079 = DIRECTION ( 'NONE', ( -1.224646799147353200E-016, -1.699538841808609900E-031, 1.000000000000000000 ) ) ; +#4080 = VERTEX_POINT ( 'NONE', #42 ) ; +#4081 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4082 = ORIENTED_EDGE ( 'NONE', *, *, #5403, .T. ) ; +#4083 = LINE ( 'NONE', #3056, #1801 ) ; +#4084 = ORIENTED_EDGE ( 'NONE', *, *, #4748, .T. ) ; +#4085 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -30.00000000000000000, -4.336808689942142000E-016 ) ) ; +#4086 = AXIS2_PLACEMENT_3D ( 'NONE', #226, #217, #192 ) ; +#4087 = DIRECTION ( 'NONE', ( 1.224646799147276800E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#4088 = VERTEX_POINT ( 'NONE', #4352 ) ; +#4089 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4090 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -35.00000000000000700, 72.50000000000001400 ) ) ; +#4091 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.500000000000003600, 67.00000000000001400 ) ) ; +#4092 = VECTOR ( 'NONE', #1789, 1000.000000000000000 ) ; +#4093 = AXIS2_PLACEMENT_3D ( 'NONE', #3376, #2100, #5077 ) ; +#4094 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4095 = ADVANCED_FACE ( 'NONE', ( #5329 ), #4770, .F. ) ; +#4096 = VERTEX_POINT ( 'NONE', #1772 ) ; +#4097 = EDGE_LOOP ( 'NONE', ( #789, #3414, #3891, #3186, #4995, #2217, #5368, #2748, #3358, #2896, #3173, #2634, #4545, #4160, #5049, #5318, #1581, #3953, #41, #3950, #2749, #1274, #2054, #4270, #3158 ) ) ; +#4098 = LINE ( 'NONE', #5237, #2962 ) ; +#4099 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.734723475976805600E-016, 0.0000000000000000000 ) ) ; +#4100 = ORIENTED_EDGE ( 'NONE', *, *, #4107, .T. ) ; +#4101 = AXIS2_PLACEMENT_3D ( 'NONE', #758, #3769, #1202 ) ; +#4102 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4103 = CIRCLE ( 'NONE', #2546, 3.189999999999998600 ) ; +#4104 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.00000000000000000, 65.56000000000001600 ) ) ; +#4105 = EDGE_CURVE ( 'NONE', #158, #5191, #3218, .T. ) ; +#4106 = CARTESIAN_POINT ( 'NONE', ( 34.63214864235386200, -7.308762734323566300E-015, 76.30535135764614600 ) ) ; +#4107 = EDGE_CURVE ( 'NONE', #117, #2792, #4230, .T. ) ; +#4108 = CIRCLE ( 'NONE', #4490, 2.500000000000002200 ) ; +#4109 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000700, 14.05566315103386000, 25.90204328050269200 ) ) ; +#4110 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4111 = CIRCLE ( 'NONE', #3088, 5.050800000000001500 ) ; +#4112 = EDGE_CURVE ( 'NONE', #3223, #4750, #1945, .T. ) ; +#4113 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -15.00000000000001400, 77.50000000000001400 ) ) ; +#4114 = ORIENTED_EDGE ( 'NONE', *, *, #321, .F. ) ; +#4115 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -2.449200000000006500, 15.49999999999998400 ) ) ; +#4116 = VECTOR ( 'NONE', #2703, 1000.000000000000000 ) ; +#4117 = EDGE_LOOP ( 'NONE', ( #2929, #4279, #3192, #3560 ) ) ; +#4118 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -35.00000000000000700, 60.00000000000000000 ) ) ; +#4119 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -32.40000000000000600, 35.00000000000000000 ) ) ; +#4120 = FACE_BOUND ( 'NONE', #3684, .T. ) ; +#4121 = AXIS2_PLACEMENT_3D ( 'NONE', #2027, #2469, #2016 ) ; +#4122 = AXIS2_PLACEMENT_3D ( 'NONE', #2361, #5316, #2793 ) ; +#4123 = CARTESIAN_POINT ( 'NONE', ( 0.1651796656624426600, -5.003928704951178500, 76.14100086755208000 ) ) ; +#4124 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 11.86200147183679700, 15.40941696147590900 ) ) ; +#4125 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.673617379884035500E-017, -1.000000000000000000 ) ) ; +#4126 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000001800, -16.25000000000000700, 78.75000000000001400 ) ) ; +#4127 = TOROIDAL_SURFACE ( 'NONE', #2694, 1.250000000000002200, 1.250000000000000000 ) ; +#4128 = AXIS2_PLACEMENT_3D ( 'NONE', #1417, #3805, #3557 ) ; +#4129 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4130 = PLANE ( 'NONE', #3297 ) ; +#4131 = ORIENTED_EDGE ( 'NONE', *, *, #5122, .F. ) ; +#4132 = ORIENTED_EDGE ( 'NONE', *, *, #4676, .T. ) ; +#4133 = ORIENTED_EDGE ( 'NONE', *, *, #3202, .T. ) ; +#4134 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#4135 = ORIENTED_EDGE ( 'NONE', *, *, #4606, .T. ) ; +#4136 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4137 = ORIENTED_EDGE ( 'NONE', *, *, #3472, .T. ) ; +#4138 = ORIENTED_EDGE ( 'NONE', *, *, #2435, .T. ) ; +#4139 = EDGE_CURVE ( 'NONE', #4618, #2824, #933, .T. ) ; +#4140 = CARTESIAN_POINT ( 'NONE', ( 2.602374448187987800E-015, -18.75000000000000700, 77.50000000000001400 ) ) ; +#4141 = EDGE_CURVE ( 'NONE', #655, #2013, #4369, .T. ) ; +#4142 = VECTOR ( 'NONE', #1135, 1000.000000000000000 ) ; +#4143 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 5.338211714299397700, 6.589322414077202900 ) ) ; +#4144 = ORIENTED_EDGE ( 'NONE', *, *, #1311, .F. ) ; +#4145 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -12.55080000000000200, 67.00000000000001400 ) ) ; +#4146 = EDGE_LOOP ( 'NONE', ( #3273, #1401, #1649, #3279, #927 ) ) ; +#4147 = CARTESIAN_POINT ( 'NONE', ( 2.212273441433314500, -6.322625408988497700, 77.48440911745542800 ) ) ; +#4148 = ORIENTED_EDGE ( 'NONE', *, *, #138, .T. ) ; +#4149 = TOROIDAL_SURFACE ( 'NONE', #1785, 1.250000000000002200, 1.250000000000000000 ) ; +#4150 = EDGE_LOOP ( 'NONE', ( #1342, #1305, #4144, #3028 ) ) ; +#4151 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4152 = ORIENTED_EDGE ( 'NONE', *, *, #105, .F. ) ; +#4153 = ORIENTED_EDGE ( 'NONE', *, *, #3501, .F. ) ; +#4154 = ORIENTED_EDGE ( 'NONE', *, *, #873, .T. ) ; +#4155 = EDGE_CURVE ( 'NONE', #4225, #2731, #5208, .T. ) ; +#4156 = FACE_OUTER_BOUND ( 'NONE', #856, .T. ) ; +#4157 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4158 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.684197549492044600E-016, 1.000000000000000000 ) ) ; +#4159 = AXIS2_PLACEMENT_3D ( 'NONE', #1, #863, #3419 ) ; +#4160 = ORIENTED_EDGE ( 'NONE', *, *, #3701, .F. ) ; +#4161 = ORIENTED_EDGE ( 'NONE', *, *, #3281, .T. ) ; +#4162 = VECTOR ( 'NONE', #2459, 1000.000000000000000 ) ; +#4163 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -13.55080000000001000, 22.10328947826994300 ) ) ; +#4164 = AXIS2_PLACEMENT_3D ( 'NONE', #2790, #4508, #3675 ) ; +#4165 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 4.771423246901652400, 2.061636439020176200 ) ) ; +#4166 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -15.00000000000000900, 77.50000000000001400 ) ) ; +#4167 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4168 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4169 = VERTEX_POINT ( 'NONE', #2248 ) ; +#4170 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #1604 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #3776, #2938, #356 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#4171 = LINE ( 'NONE', #3342, #3031 ) ; +#4172 = PLANE ( 'NONE', #3800 ) ; +#4173 = CARTESIAN_POINT ( 'NONE', ( -1.250000000000000900, -8.750000000000012400, 77.50000000000001400 ) ) ; +#4174 = CARTESIAN_POINT ( 'NONE', ( 34.98741376118806600, 0.4412669090968284700, 75.28156844652571100 ) ) ; +#4175 = VECTOR ( 'NONE', #5026, 1000.000000000000000 ) ; +#4176 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.999999999999994700, 71.94000000000001200 ) ) ; +#4177 = CARTESIAN_POINT ( 'NONE', ( 0.1325162751585623500, -9.929204632268158200, 75.81484106229355300 ) ) ; +#4178 = FACE_OUTER_BOUND ( 'NONE', #3122, .T. ) ; +#4179 = EDGE_CURVE ( 'NONE', #158, #1077, #2956, .T. ) ; +#4180 = CYLINDRICAL_SURFACE ( 'NONE', #160, 2.500000000000002200 ) ; +#4181 = EDGE_CURVE ( 'NONE', #3942, #2553, #649, .T. ) ; +#4182 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.106485876673535900E-032, 2.428612866367526000E-016 ) ) ; +#4183 = LINE ( 'NONE', #901, #3043 ) ; +#4184 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 2.822510048247936600, 0.7072819363165815400 ) ) ; +#4185 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 3.750000000000024900, 80.00000000000001400 ) ) ; +#4186 = EDGE_LOOP ( 'NONE', ( #1732, #1527 ) ) ; +#4187 = CIRCLE ( 'NONE', #2941, 1.199999999999999700 ) ; +#4188 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 15.00000000000000000, 36.45143626803399400 ) ) ; +#4189 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999994300, 12.72395262701101800, 67.05112425796741600 ) ) ; +#4190 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4191 = VECTOR ( 'NONE', #4711, 1000.000000000000000 ) ; +#4192 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4193 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -8.673617379884035500E-017, 1.000000000000000000 ) ) ; +#4194 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -5.000000000000006200, 75.00000000000001400 ) ) ; +#4195 = AXIS2_PLACEMENT_3D ( 'NONE', #2203, #2167, #2144 ) ; +#4196 = ORIENTED_EDGE ( 'NONE', *, *, #4107, .F. ) ; +#4197 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#4198 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.2202050317675458600, 2.500000001505680500 ) ) ; +#4199 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4200 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -30.00000000000000700, 33.80000000000000400 ) ) ; +#4201 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#4202 = EDGE_LOOP ( 'NONE', ( #3198, #3748, #4324, #4695 ) ) ; +#4203 = AXIS2_PLACEMENT_3D ( 'NONE', #3623, #1047, #4048 ) ; +#4204 = ORIENTED_EDGE ( 'NONE', *, *, #1884, .T. ) ; +#4205 = CARTESIAN_POINT ( 'NONE', ( 1.492426027889583900E-012, 13.49325276983624600, 22.42417230729038000 ) ) ; +#4206 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 1.249999999999998200, 80.00000000000001400 ) ) ; +#4207 = ORIENTED_EDGE ( 'NONE', *, *, #3386, .F. ) ; +#4208 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#4209 = VERTEX_POINT ( 'NONE', #4803 ) ; +#4210 = ADVANCED_FACE ( 'NONE', ( #2823 ), #4827, .F. ) ; +#4211 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 9.452000635899359800, 16.15981304222022200 ) ) ; +#4212 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -118.8152730712011000, 79.99999999999998600 ) ) ; +#4213 = ORIENTED_EDGE ( 'NONE', *, *, #2609, .T. ) ; +#4214 = CIRCLE ( 'NONE', #521, 1.250000000000001100 ) ; +#4215 = EDGE_LOOP ( 'NONE', ( #299, #441, #505, #972 ) ) ; +#4216 = ORIENTED_EDGE ( 'NONE', *, *, #501, .F. ) ; +#4217 = EDGE_CURVE ( 'NONE', #325, #2197, #4006, .T. ) ; +#4218 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.224646799147275600E-016, 0.0000000000000000000 ) ) ; +#4219 = ORIENTED_EDGE ( 'NONE', *, *, #1008, .T. ) ; +#4220 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995000, 3.750000000000024900, 77.50000000000001400 ) ) ; +#4221 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -30.00000000000000700, 35.00000000000000000 ) ) ; +#4222 = FACE_OUTER_BOUND ( 'NONE', #1251, .T. ) ; +#4223 = ORIENTED_EDGE ( 'NONE', *, *, #5356, .T. ) ; +#4224 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4225 = VERTEX_POINT ( 'NONE', #4844 ) ; +#4226 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000700, 8.888878898085488700, 7.746167553449288000 ) ) ; +#4227 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 9.452000635745553900, 16.15981304224077400 ) ) ; +#4228 = ORIENTED_EDGE ( 'NONE', *, *, #4953, .F. ) ; +#4229 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.0000000000000000000, 2.500000000000000000 ) ) ; +#4230 = CIRCLE ( 'NONE', #658, 2.500000000000002200 ) ; +#4231 = EDGE_CURVE ( 'NONE', #4169, #366, #3820, .T. ) ; +#4232 = CARTESIAN_POINT ( 'NONE', ( 1.530808498934341900E-016, 1.249999999999992700, 77.50000000000001400 ) ) ; +#4233 = EDGE_LOOP ( 'NONE', ( #5128, #2255 ) ) ; +#4234 = VERTEX_POINT ( 'NONE', #1843 ) ; +#4235 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 3.120083859410689400, 3.951072008106504300 ) ) ; +#4236 = CIRCLE ( 'NONE', #1171, 1.250000000000001100 ) ; +#4237 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4238 = ORIENTED_EDGE ( 'NONE', *, *, #352, .F. ) ; +#4239 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -16.25000000000001400, 80.00000000000000000 ) ) ; +#4240 = VECTOR ( 'NONE', #1852, 1000.000000000000000 ) ; +#4241 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4242 = AXIS2_PLACEMENT_3D ( 'NONE', #3706, #695, #2446 ) ; +#4243 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -7.500000000000003600, 67.00000000000001400 ) ) ; +#4244 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4245 = CARTESIAN_POINT ( 'NONE', ( 0.3678513576461585600, -7.308762734323556900E-015, 76.30535135764617400 ) ) ; +#4246 = ADVANCED_FACE ( 'NONE', ( #3956 ), #4821, .F. ) ; +#4247 = LINE ( 'NONE', #3132, #3096 ) ; +#4248 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -2.775557561562891400E-016 ) ) ; +#4249 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000001400, 2.329857159514002500, 0.4683151161667504800 ) ) ; +#4250 = CARTESIAN_POINT ( 'NONE', ( 37.50099999999998300, -25.50000000000000400, 23.79999999999999700 ) ) ; +#4251 = PLANE ( 'NONE', #2440 ) ; +#4252 = FACE_OUTER_BOUND ( 'NONE', #3652, .T. ) ; +#4253 = VERTEX_POINT ( 'NONE', #3579 ) ; +#4254 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4255 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#4256 = EDGE_CURVE ( 'NONE', #978, #1910, #391, .T. ) ; +#4257 = VECTOR ( 'NONE', #2261, 1000.000000000000000 ) ; +#4258 = EDGE_CURVE ( 'NONE', #3124, #3889, #1538, .T. ) ; +#4259 = CARTESIAN_POINT ( 'NONE', ( 0.003264842058879818100, -5.656306383475516100, 75.13925550853809900 ) ) ; +#4260 = PLANE ( 'NONE', #414 ) ; +#4261 = FACE_BOUND ( 'NONE', #523, .T. ) ; +#4262 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4263 = CARTESIAN_POINT ( 'NONE', ( 2.602374448187987800E-015, -18.75000000000000700, 76.25000000000001400 ) ) ; +#4264 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#4265 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#4266 = VECTOR ( 'NONE', #2587, 1000.000000000000000 ) ; +#4267 = EDGE_CURVE ( 'NONE', #1798, #1390, #2555, .T. ) ; +#4268 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#4269 = ADVANCED_FACE ( 'NONE', ( #4950 ), #1406, .T. ) ; +#4270 = ORIENTED_EDGE ( 'NONE', *, *, #577, .T. ) ; +#4271 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 4.854711507750451500, 5.912194959818494400 ) ) ; +#4272 = ORIENTED_EDGE ( 'NONE', *, *, #2241, .F. ) ; +#4273 = AXIS2_PLACEMENT_3D ( 'NONE', #3926, #1379, #3944 ) ; +#4274 = ORIENTED_EDGE ( 'NONE', *, *, #952, .T. ) ; +#4275 = ORIENTED_EDGE ( 'NONE', *, *, #5366, .T. ) ; +#4276 = AXIS2_PLACEMENT_3D ( 'NONE', #3179, #4473, #1904 ) ; +#4277 = CARTESIAN_POINT ( 'NONE', ( 33.85105520563111300, -9.725953659485693200, 77.10919263742592000 ) ) ; +#4278 = VERTEX_POINT ( 'NONE', #1452 ) ; +#4279 = ORIENTED_EDGE ( 'NONE', *, *, #3181, .T. ) ; +#4280 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, -6.591949208711870900E-015, 78.75000000000001400 ) ) ; +#4281 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -13.55080000000001000, 22.10328947826994300 ) ) ; +#4282 = VECTOR ( 'NONE', #1979, 1000.000000000000000 ) ; +#4283 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -24.99999999999997900, 69.95000000000001700 ) ) ; +#4284 = ORIENTED_EDGE ( 'NONE', *, *, #1115, .T. ) ; +#4285 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4286 = ORIENTED_EDGE ( 'NONE', *, *, #5232, .T. ) ; +#4287 = EDGE_CURVE ( 'NONE', #2258, #3211, #250, .T. ) ; +#4288 = ORIENTED_EDGE ( 'NONE', *, *, #3967, .T. ) ; +#4289 = EDGE_CURVE ( 'NONE', #5449, #2258, #4700, .T. ) ; +#4290 = CIRCLE ( 'NONE', #1214, 1.250000000000001100 ) ; +#4291 = VERTEX_POINT ( 'NONE', #593 ) ; +#4292 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000004400, 8.892651621326779200, 7.753826637482084100 ) ) ; +#4293 = EDGE_LOOP ( 'NONE', ( #254, #710, #385, #3897, #4806, #2607 ) ) ; +#4294 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4295 = ORIENTED_EDGE ( 'NONE', *, *, #1990, .T. ) ; +#4296 = ORIENTED_EDGE ( 'NONE', *, *, #4983, .T. ) ; +#4297 = FACE_OUTER_BOUND ( 'NONE', #154, .T. ) ; +#4298 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4299 = EDGE_CURVE ( 'NONE', #3265, #2375, #2417, .T. ) ; +#4300 = PLANE ( 'NONE', #4309 ) ; +#4301 = ORIENTED_EDGE ( 'NONE', *, *, #1561, .F. ) ; +#4302 = VERTEX_POINT ( 'NONE', #2319 ) ; +#4303 = ADVANCED_FACE ( 'NONE', ( #120 ), #5521, .F. ) ; +#4304 = VECTOR ( 'NONE', #2855, 1000.000000000000000 ) ; +#4305 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4306 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -16.25000000000000700, 75.00000000000001400 ) ) ; +#4307 = ORIENTED_EDGE ( 'NONE', *, *, #2509, .T. ) ; +#4308 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4309 = AXIS2_PLACEMENT_3D ( 'NONE', #4145, #4056, #4039 ) ; +#4310 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000003100, 15.00000000000000200, 36.20917491698514100 ) ) ; +#4311 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -118.8152730712011000, 79.99999999999998600 ) ) ; +#4312 = AXIS2_PLACEMENT_3D ( 'NONE', #3816, #1244, #4254 ) ; +#4313 = FACE_OUTER_BOUND ( 'NONE', #624, .T. ) ; +#4314 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -24.99999999999997900, 68.75000000000001400 ) ) ; +#4315 = FACE_OUTER_BOUND ( 'NONE', #908, .T. ) ; +#4316 = AXIS2_PLACEMENT_3D ( 'NONE', #1995, #4978, #2436 ) ; +#4317 = CIRCLE ( 'NONE', #3722, 2.500000000000000400 ) ; +#4318 = CARTESIAN_POINT ( 'NONE', ( 32.64618450549183800, -6.639759102576543400, 77.49674497874242700 ) ) ; +#4319 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -32.50000000000000700, 55.50000000000000700 ) ) ; +#4320 = CIRCLE ( 'NONE', #890, 2.500000000000000000 ) ; +#4321 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999994300, 10.00000000000002000, 65.56000000000001600 ) ) ; +#4322 = DIRECTION ( 'NONE', ( -2.449293598294553600E-016, 1.000000000000000000, -8.551662891793383000E-031 ) ) ; +#4323 = CARTESIAN_POINT ( 'NONE', ( 0.2809701315377040000, -15.00408807987378500, 76.15467740287077400 ) ) ; +#4324 = ORIENTED_EDGE ( 'NONE', *, *, #4437, .F. ) ; +#4325 = FACE_OUTER_BOUND ( 'NONE', #5437, .T. ) ; +#4326 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#4327 = ADVANCED_FACE ( 'NONE', ( #2285 ), #3285, .F. ) ; +#4328 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 8.786796564403610800, 9.261039189301981000E-014 ) ) ; +#4329 = EDGE_CURVE ( 'NONE', #4058, #2422, #3420, .T. ) ; +#4330 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #4713, #5116, #3436, #859 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( -8.881784197001252300E-016, 1.570796326794896600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243648300, 0.8047378541243648300, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#4331 = EDGE_CURVE ( 'NONE', #2472, #376, #4430, .T. ) ; +#4332 = VECTOR ( 'NONE', #165, 1000.000000000000000 ) ; +#4333 = CARTESIAN_POINT ( 'NONE', ( 3.061616997868437900E-016, -7.459310946700275200E-015, 77.50000000000001400 ) ) ; +#4334 = EDGE_LOOP ( 'NONE', ( #2880, #770, #2913, #3150 ) ) ; +#4335 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 15.00000000000000000, 40.00000000000001400 ) ) ; +#4336 = CARTESIAN_POINT ( 'NONE', ( 9.147955830346441200E-017, 12.72395262701101100, 70.44887574203259800 ) ) ; +#4337 = CARTESIAN_POINT ( 'NONE', ( 9.184850993604820600E-016, -5.000000000000006200, 77.50000000000001400 ) ) ; +#4338 = EDGE_CURVE ( 'NONE', #4411, #2343, #2152, .T. ) ; +#4339 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4340 = ORIENTED_EDGE ( 'NONE', *, *, #4364, .F. ) ; +#4341 = CARTESIAN_POINT ( 'NONE', ( 1.684508329464213600E-014, 5.000000000000000900, 75.00000000000001400 ) ) ; +#4342 = AXIS2_PLACEMENT_3D ( 'NONE', #659, #3663, #1096 ) ; +#4343 = ORIENTED_EDGE ( 'NONE', *, *, #1699, .T. ) ; +#4344 = VERTEX_POINT ( 'NONE', #625 ) ; +#4345 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -24.99999999999997900, 67.55000000000002600 ) ) ; +#4346 = ORIENTED_EDGE ( 'NONE', *, *, #827, .F. ) ; +#4347 = AXIS2_PLACEMENT_3D ( 'NONE', #5240, #2280, #4836 ) ; +#4348 = PERSON_AND_ORGANIZATION ( #5121, #5438 ) ; +#4349 = ORIENTED_EDGE ( 'NONE', *, *, #2424, .T. ) ; +#4350 = APPROVAL ( #5090, 'UNSPECIFIED' ) ; +#4351 = ORIENTED_EDGE ( 'NONE', *, *, #3311, .T. ) ; +#4352 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -30.00000000000000000, 80.00000000000000000 ) ) ; +#4353 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4354 = LINE ( 'NONE', #43, #3203 ) ; +#4355 = ADVANCED_FACE ( 'NONE', ( #4297 ), #864, .T. ) ; +#4356 = EDGE_LOOP ( 'NONE', ( #1271, #2414, #3134, #3749, #4100, #4758 ) ) ; +#4357 = VERTEX_POINT ( 'NONE', #4078 ) ; +#4358 = ORIENTED_EDGE ( 'NONE', *, *, #3313, .F. ) ; +#4359 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -32.40000000000000600, 31.81000000000000600 ) ) ; +#4360 = FACE_OUTER_BOUND ( 'NONE', #3878, .T. ) ; +#4361 = VERTEX_POINT ( 'NONE', #4513 ) ; +#4362 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -13.63795574274766600, 21.10709478017819100 ) ) ; +#4363 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9961946980917455500, 0.08715574274765822100 ) ) ; +#4364 = EDGE_CURVE ( 'NONE', #176, #3067, #3147, .T. ) ; +#4365 = ORIENTED_EDGE ( 'NONE', *, *, #3596, .F. ) ; +#4366 = EDGE_CURVE ( 'NONE', #5134, #4344, #998, .T. ) ; +#4367 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.734723475976806800E-016, 4.814824860968089100E-032 ) ) ; +#4368 = ORIENTED_EDGE ( 'NONE', *, *, #2312, .F. ) ; +#4369 = LINE ( 'NONE', #3520, #1806 ) ; +#4370 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 1.492686178499071900, 2.841598652262859100 ) ) ; +#4371 = ORIENTED_EDGE ( 'NONE', *, *, #207, .F. ) ; +#4372 = ORIENTED_EDGE ( 'NONE', *, *, #1287, .F. ) ; +#4373 = CIRCLE ( 'NONE', #579, 1.250000000000001100 ) ; +#4374 = EDGE_LOOP ( 'NONE', ( #458, #5209 ) ) ; +#4375 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999997900, -15.00000000000000900, 77.50000000000001400 ) ) ; +#4376 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.08715574274765822100, 0.9961946980917455500 ) ) ; +#4377 = FACE_OUTER_BOUND ( 'NONE', #3721, .T. ) ; +#4378 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#4379 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4380 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.250000000000006200, 75.00000000000001400 ) ) ; +#4381 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.059793774530135100, 20.53158018112177500 ) ) ; +#4382 = VECTOR ( 'NONE', #5337, 1000.000000000000000 ) ; +#4383 = VECTOR ( 'NONE', #3156, 1000.000000000000000 ) ; +#4384 = AXIS2_PLACEMENT_3D ( 'NONE', #424, #534, #507 ) ; +#4385 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -35.00000000000000000, 31.81000000000000600 ) ) ; +#4386 = ADVANCED_FACE ( 'NONE', ( #4156 ), #3656, .F. ) ; +#4387 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4388 = AXIS2_PLACEMENT_3D ( 'NONE', #2668, #79, #3093 ) ; +#4389 = CIRCLE ( 'NONE', #1937, 1.250000000000002000 ) ; +#4390 = VERTEX_POINT ( 'NONE', #651 ) ; +#4391 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -2.775557561562891400E-016 ) ) ; +#4392 = AXIS2_PLACEMENT_3D ( 'NONE', #3320, #5421, #4596 ) ; +#4393 = CARTESIAN_POINT ( 'NONE', ( 0.4198771106525374100, -9.966931767517063900, 76.39771451534680600 ) ) ; +#4394 = FACE_OUTER_BOUND ( 'NONE', #4455, .T. ) ; +#4395 = EDGE_CURVE ( 'NONE', #4955, #2013, #2009, .T. ) ; +#4396 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 1.249999999999993600, 78.75000000000001400 ) ) ; +#4397 = FACE_OUTER_BOUND ( 'NONE', #1764, .T. ) ; +#4398 = EDGE_CURVE ( 'NONE', #4014, #4882, #1871, .T. ) ; +#4399 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -23.00000000000000400, 0.0000000000000000000 ) ) ; +#4400 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 2.772537519722293500, 3.641850066811856300 ) ) ; +#4401 = CIRCLE ( 'NONE', #1818, 1.250000000000002200 ) ; +#4402 = CARTESIAN_POINT ( 'NONE', ( 34.96338687082124600, -9.696797863289015500, 75.43067845327587400 ) ) ; +#4403 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4404 = EDGE_CURVE ( 'NONE', #623, #5525, #3017, .T. ) ; +#4405 = EDGE_LOOP ( 'NONE', ( #171, #3818, #3601, #2001, #5061, #4274 ) ) ; +#4406 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#4407 = CARTESIAN_POINT ( 'NONE', ( 2.481535615249144100, -7.849884272326938200, 77.50019583923207700 ) ) ; +#4408 = ORIENTED_EDGE ( 'NONE', *, *, #792, .F. ) ; +#4409 = ORIENTED_EDGE ( 'NONE', *, *, #2892, .F. ) ; +#4410 = ADVANCED_FACE ( 'NONE', ( #5141 ), #1978, .F. ) ; +#4411 = VERTEX_POINT ( 'NONE', #2395 ) ; +#4412 = DIRECTION ( 'NONE', ( 1.224646799147276800E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#4413 = ORIENTED_EDGE ( 'NONE', *, *, #3596, .T. ) ; +#4414 = AXIS2_PLACEMENT_3D ( 'NONE', #1444, #1389, #1385 ) ; +#4415 = CARTESIAN_POINT ( 'NONE', ( 13.00000000000000200, -30.00000000000001100, 72.50000000000001400 ) ) ; +#4416 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4417 = VECTOR ( 'NONE', #4533, 1000.000000000000000 ) ; +#4418 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 11.02943581757452100, 22.85117411510583500 ) ) ; +#4419 = ORIENTED_EDGE ( 'NONE', *, *, #2174, .F. ) ; +#4420 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 4.792925085871536900, 2.092114685765133600 ) ) ; +#4421 = EDGE_LOOP ( 'NONE', ( #1404, #2199 ) ) ; +#4422 = AXIS2_PLACEMENT_3D ( 'NONE', #178, #1050, #4899 ) ; +#4423 = ORIENTED_EDGE ( 'NONE', *, *, #5429, .T. ) ; +#4424 = LINE ( 'NONE', #717, #4002 ) ; +#4425 = ORIENTED_EDGE ( 'NONE', *, *, #5166, .T. ) ; +#4426 = ORIENTED_EDGE ( 'NONE', *, *, #5262, .F. ) ; +#4427 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4428 = ORIENTED_EDGE ( 'NONE', *, *, #1848, .T. ) ; +#4429 = ORIENTED_EDGE ( 'NONE', *, *, #242, .F. ) ; +#4430 = CIRCLE ( 'NONE', #4122, 2.499999999999998700 ) ; +#4431 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4432 = EDGE_LOOP ( 'NONE', ( #581, #4148, #3729, #4537 ) ) ; +#4433 = ORIENTED_EDGE ( 'NONE', *, *, #474, .F. ) ; +#4434 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 12.49999999999999300, 80.00000000000001400 ) ) ; +#4435 = FACE_OUTER_BOUND ( 'NONE', #2990, .T. ) ; +#4436 = EDGE_CURVE ( 'NONE', #2079, #760, #1737, .T. ) ; +#4437 = EDGE_CURVE ( 'NONE', #4225, #2686, #578, .T. ) ; +#4438 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4439 = ADVANCED_FACE ( 'NONE', ( #2885 ), #3271, .T. ) ; +#4440 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959494100E-015, 3.387832469985976800, 1.026231021393087900 ) ) ; +#4441 = VERTEX_POINT ( 'NONE', #1996 ) ; +#4442 = FACE_OUTER_BOUND ( 'NONE', #306, .T. ) ; +#4443 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#4444 = CIRCLE ( 'NONE', #2377, 1.199999999999999700 ) ; +#4445 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4446 = EDGE_CURVE ( 'NONE', #1531, #938, #3885, .T. ) ; +#4447 = CIRCLE ( 'NONE', #960, 1.200000000000006600 ) ; +#4448 = AXIS2_PLACEMENT_3D ( 'NONE', #2171, #5158, #4730 ) ; +#4449 = VECTOR ( 'NONE', #3714, 1000.000000000000000 ) ; +#4450 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4451 = CYLINDRICAL_SURFACE ( 'NONE', #586, 1.200000000000006600 ) ; +#4452 = AXIS2_PLACEMENT_3D ( 'NONE', #1304, #3862, #866 ) ; +#4453 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 0.0000000000000000000, 2.500000000000000000 ) ) ; +#4454 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 6.878258498417497300, 4.442897650953917800 ) ) ; +#4455 = EDGE_LOOP ( 'NONE', ( #2047, #5456, #3880, #4275 ) ) ; +#4456 = AXIS2_PLACEMENT_3D ( 'NONE', #4212, #1636, #4645 ) ; +#4457 = LINE ( 'NONE', #1726, #3312 ) ; +#4458 = ADVANCED_FACE ( 'NONE', ( #5005 ), #3743, .T. ) ; +#4459 = VECTOR ( 'NONE', #761, 1000.000000000000000 ) ; +#4460 = EDGE_CURVE ( 'NONE', #635, #2738, #4883, .T. ) ; +#4461 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999994300, 10.00000000000002000, 68.75000000000001400 ) ) ; +#4462 = EDGE_CURVE ( 'NONE', #1668, #3810, #3023, .T. ) ; +#4463 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -124.0100684654239100, 20.62321694188996100 ) ) ; +#4464 = EDGE_LOOP ( 'NONE', ( #4954, #1194 ) ) ; +#4465 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4466 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.734723475976807100E-016, -4.814824860968089600E-032 ) ) ; +#4467 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 6.257410733751300700, 8.118878133767456300 ) ) ; +#4468 = ORIENTED_EDGE ( 'NONE', *, *, #2313, .F. ) ; +#4469 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.50000000000000400, 7.499999999999996400 ) ) ; +#4470 = VERTEX_POINT ( 'NONE', #4993 ) ; +#4471 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4472 = ORIENTED_EDGE ( 'NONE', *, *, #4029, .F. ) ; +#4473 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4474 = VERTEX_POINT ( 'NONE', #319 ) ; +#4475 = ORIENTED_EDGE ( 'NONE', *, *, #4952, .F. ) ; +#4476 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.500000000000003600, 67.00000000000001400 ) ) ; +#4477 = AXIS2_PLACEMENT_3D ( 'NONE', #2388, #2311, #2429 ) ; +#4478 = VECTOR ( 'NONE', #1718, 1000.000000000000000 ) ; +#4479 = CARTESIAN_POINT ( 'NONE', ( 33.39999999999994200, 10.00000000000002000, 67.55000000000002600 ) ) ; +#4480 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.50000000000000400, 42.49999999999999300 ) ) ; +#4481 = EDGE_LOOP ( 'NONE', ( #1592, #3597 ) ) ; +#4482 = CARTESIAN_POINT ( 'NONE', ( 2.296212748401168500E-015, -15.00000000000000900, 77.50000000000001400 ) ) ; +#4483 = AXIS2_PLACEMENT_3D ( 'NONE', #1088, #4089, #1511 ) ; +#4484 = VERTEX_POINT ( 'NONE', #1169 ) ; +#4485 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -123.1296560144841400, 30.68637730413346900 ) ) ; +#4486 = ORIENTED_EDGE ( 'NONE', *, *, #1633, .F. ) ; +#4487 = ADVANCED_FACE ( 'NONE', ( #2623 ), #2018, .F. ) ; +#4488 = CIRCLE ( 'NONE', #5150, 5.050799999999998000 ) ; +#4489 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 8.662420912696038800, 13.67146019343485500 ) ) ; +#4490 = AXIS2_PLACEMENT_3D ( 'NONE', #1879, #4870, #2314 ) ; +#4491 = ORIENTED_EDGE ( 'NONE', *, *, #5466, .F. ) ; +#4492 = ORIENTED_EDGE ( 'NONE', *, *, #762, .F. ) ; +#4493 = VECTOR ( 'NONE', #3464, 1000.000000000000000 ) ; +#4494 = DIRECTION ( 'NONE', ( 1.224646799147276800E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#4495 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#4496 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -30.00000000000001400, 60.00000000000000000 ) ) ; +#4497 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999998600, -18.74999999999998200, 78.75000000000001400 ) ) ; +#4498 = ORIENTED_EDGE ( 'NONE', *, *, #5262, .T. ) ; +#4499 = ORIENTED_EDGE ( 'NONE', *, *, #709, .T. ) ; +#4500 = FACE_OUTER_BOUND ( 'NONE', #3559, .T. ) ; +#4501 = CARTESIAN_POINT ( 'NONE', ( 34.90414571869359900, -15.13064561006382300, 75.68975725390721700 ) ) ; +#4502 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 12.49999999999999800, 40.00000000000000700 ) ) ; +#4503 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.00000000000000000, 68.75000000000001400 ) ) ; +#4504 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.684197549492044600E-016, 1.000000000000000000 ) ) ; +#4505 = VECTOR ( 'NONE', #2253, 1000.000000000000000 ) ; +#4506 = EDGE_CURVE ( 'NONE', #1114, #1515, #2022, .T. ) ; +#4507 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -35.00000000000000000, 31.81000000000000600 ) ) ; +#4508 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4509 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.459310946700275200E-015, 80.00000000000001400 ) ) ; +#4510 = FACE_BOUND ( 'NONE', #1575, .T. ) ; +#4511 = VECTOR ( 'NONE', #2649, 1000.000000000000000 ) ; +#4512 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1081, #1068, #1023, #1005, #992, #982, #970, #964, #955, #919 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0004592101670904585900, 0.0009184203341809171800, 0.001377630501271375900, 0.001836840668361834400 ), + .UNSPECIFIED. ) ; +#4513 = CARTESIAN_POINT ( 'NONE', ( 36.24999999999996400, -4.999999999999980500, 77.50000000000001400 ) ) ; +#4514 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891400E-016, -1.000000000000000000 ) ) ; +#4515 = CIRCLE ( 'NONE', #773, 1.250000000000002200 ) ; +#4516 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -12.55080000000000200, 67.00000000000001400 ) ) ; +#4517 = ADVANCED_FACE ( 'NONE', ( #1469, #2751, #457, #1133, #317, #4753 ), #747, .F. ) ; +#4518 = EDGE_CURVE ( 'NONE', #1779, #2888, #1020, .T. ) ; +#4519 = ORIENTED_EDGE ( 'NONE', *, *, #4815, .T. ) ; +#4520 = AXIS2_PLACEMENT_3D ( 'NONE', #4314, #1738, #4738 ) ; +#4521 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999992900, 5.000000000000024900, 75.00000000000001400 ) ) ; +#4522 = FACE_OUTER_BOUND ( 'NONE', #4927, .T. ) ; +#4523 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 15.00000000000000000, 40.00000000000000700 ) ) ; +#4524 = DIRECTION ( 'NONE', ( 1.224646799147276800E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#4525 = AXIS2_PLACEMENT_3D ( 'NONE', #2462, #2026, #4167 ) ; +#4526 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999997900, -16.25000000000000700, 77.50000000000001400 ) ) ; +#4527 = VECTOR ( 'NONE', #3319, 1000.000000000000000 ) ; +#4528 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999997200, -8.749999999999985800, 77.50000000000001400 ) ) ; +#4529 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4530 = VECTOR ( 'NONE', #4190, 1000.000000000000000 ) ; +#4531 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4532 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4533 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4534 = EDGE_LOOP ( 'NONE', ( #2597, #2545, #3806, #4288, #937, #5243 ) ) ; +#4535 = EDGE_CURVE ( 'NONE', #3067, #4628, #3614, .T. ) ; +#4536 = ORIENTED_EDGE ( 'NONE', *, *, #5288, .T. ) ; +#4537 = ORIENTED_EDGE ( 'NONE', *, *, #1808, .F. ) ; +#4538 = EDGE_CURVE ( 'NONE', #1536, #771, #177, .T. ) ; +#4539 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 11.02943581746340700, 22.85117411511745500 ) ) ; +#4540 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.982541115402065100E-016, 1.000000000000000000 ) ) ; +#4541 = CARTESIAN_POINT ( 'NONE', ( 0.2522330730247281400, -9.987243147919505400, 76.09432346314797300 ) ) ; +#4542 = PLANE ( 'NONE', #3148 ) ; +#4543 = ORIENTED_EDGE ( 'NONE', *, *, #4112, .F. ) ; +#4544 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, -32.50000000000000700, 55.50000000000000700 ) ) ; +#4545 = ORIENTED_EDGE ( 'NONE', *, *, #1308, .T. ) ; +#4546 = CYLINDRICAL_SURFACE ( 'NONE', #5111, 2.500000000000000000 ) ; +#4547 = ORIENTED_EDGE ( 'NONE', *, *, #1516, .F. ) ; +#4548 = EDGE_CURVE ( 'NONE', #4554, #4077, #4621, .T. ) ; +#4549 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4550 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4551 = ORIENTED_EDGE ( 'NONE', *, *, #2182, .F. ) ; +#4552 = VERTEX_POINT ( 'NONE', #5100 ) ; +#4553 = LINE ( 'NONE', #2403, #2145 ) ; +#4554 = VERTEX_POINT ( 'NONE', #820 ) ; +#4555 = ORIENTED_EDGE ( 'NONE', *, *, #2273, .F. ) ; +#4556 = VERTEX_POINT ( 'NONE', #2970 ) ; +#4557 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4558 = AXIS2_PLACEMENT_3D ( 'NONE', #92, #520, #4823 ) ; +#4559 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 10.72793748972906700, 11.94875546533977400 ) ) ; +#4560 = ORIENTED_EDGE ( 'NONE', *, *, #4287, .F. ) ; +#4561 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -24.99999999999997900, 68.75000000000001400 ) ) ; +#4562 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4563 = VECTOR ( 'NONE', #1477, 1000.000000000000000 ) ; +#4564 = ORIENTED_EDGE ( 'NONE', *, *, #104, .T. ) ; +#4565 = EDGE_LOOP ( 'NONE', ( #1282, #1542 ) ) ; +#4566 = CIRCLE ( 'NONE', #4906, 1.199999999999999700 ) ; +#4567 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4568 = DIRECTION ( 'NONE', ( 1.734723475976806800E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#4569 = FACE_OUTER_BOUND ( 'NONE', #839, .T. ) ; +#4570 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995700, 1.682681771697493700E-014, 80.00000000000001400 ) ) ; +#4571 = EDGE_CURVE ( 'NONE', #4792, #3724, #3484, .T. ) ; +#4572 = EDGE_CURVE ( 'NONE', #4080, #3146, #1200, .T. ) ; +#4573 = CIRCLE ( 'NONE', #1218, 0.5000000000000004400 ) ; +#4574 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -10.00000000000001100, 76.25000000000001400 ) ) ; +#4575 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 7.430056262060011500, 5.216945115997074100 ) ) ; +#4576 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -35.00000000000000000, 36.20000000000000300 ) ) ; +#4577 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4578 = FACE_OUTER_BOUND ( 'NONE', #3593, .T. ) ; +#4579 = EDGE_CURVE ( 'NONE', #5525, #2049, #1338, .T. ) ; +#4580 = CYLINDRICAL_SURFACE ( 'NONE', #4595, 1.199999999999992600 ) ; +#4581 = CARTESIAN_POINT ( 'NONE', ( 1.920929097565568400, -5.890539239907115000, 77.43424279277022000 ) ) ; +#4582 = CARTESIAN_POINT ( 'NONE', ( 1.071565949253891500E-015, -6.250000000000006200, 77.50000000000001400 ) ) ; +#4583 = CYLINDRICAL_SURFACE ( 'NONE', #5001, 1.200000000000006600 ) ; +#4584 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4585 = ORIENTED_EDGE ( 'NONE', *, *, #4460, .T. ) ; +#4586 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4587 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -32.50000000000000700, 55.50000000000000700 ) ) ; +#4588 = CIRCLE ( 'NONE', #2368, 1.250000000000001100 ) ; +#4589 = AXIS2_PLACEMENT_3D ( 'NONE', #3720, #3707, #3699 ) ; +#4590 = AXIS2_PLACEMENT_3D ( 'NONE', #4281, #1705, #4714 ) ; +#4591 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4592 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 2.772537521910230400, 3.641850063880778300 ) ) ; +#4593 = CIRCLE ( 'NONE', #844, 5.050800000000001500 ) ; +#4594 = CARTESIAN_POINT ( 'NONE', ( 33.39999999999994200, 10.00000000000002000, 65.56000000000001600 ) ) ; +#4595 = AXIS2_PLACEMENT_3D ( 'NONE', #1109, #4549, #1977 ) ; +#4596 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4597 = CARTESIAN_POINT ( 'NONE', ( 34.90956823767329800, 0.1233909019524733800, 75.68651302813344700 ) ) ; +#4598 = ORIENTED_EDGE ( 'NONE', *, *, #4437, .T. ) ; +#4599 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2121, #4690, #5097, #2559, #5500, #2984, #404, #3412, #834, #3841, #1280, #4277, #1701, #4710, #2143, #5113, #2578, #5524 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 1.214306433183765100E-017, 0.0005216237795876689700, 0.001043247559175325800, 0.001564871338762982700, 0.002086495118350639500, 0.002608118897938296200, 0.003129742677525953300, 0.003651366457113610100, 0.004172990236701266800 ), + .UNSPECIFIED. ) ; +#4600 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4601 = CARTESIAN_POINT ( 'NONE', ( 0.03449169846117178900, -9.702473244481748100, 75.42654006001967600 ) ) ; +#4602 = ORIENTED_EDGE ( 'NONE', *, *, #711, .T. ) ; +#4603 = CARTESIAN_POINT ( 'NONE', ( 13.00000000000000200, -35.00000000000000700, 72.00000000000001400 ) ) ; +#4604 = VERTEX_POINT ( 'NONE', #3846 ) ; +#4605 = ORIENTED_EDGE ( 'NONE', *, *, #4688, .T. ) ; +#4606 = EDGE_CURVE ( 'NONE', #4628, #4880, #4488, .T. ) ; +#4607 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#4608 = EDGE_CURVE ( 'NONE', #2489, #5252, #3346, .T. ) ; +#4609 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 2.521761000665904800, 0.5597823191470753200 ) ) ; +#4610 = ORIENTED_EDGE ( 'NONE', *, *, #431, .F. ) ; +#4611 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#4612 = ORIENTED_EDGE ( 'NONE', *, *, #4256, .F. ) ; +#4613 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4614 = LINE ( 'NONE', #461, #4478 ) ; +#4615 = CARTESIAN_POINT ( 'NONE', ( 2.168404344971008900E-015, 12.49999999995491400, 36.53470552587703700 ) ) ; +#4616 = ORIENTED_EDGE ( 'NONE', *, *, #4217, .T. ) ; +#4617 = CARTESIAN_POINT ( 'NONE', ( 34.92214158203960700, 13.13070237256534900, 68.04023454383173000 ) ) ; +#4618 = VERTEX_POINT ( 'NONE', #861 ) ; +#4619 = ORIENTED_EDGE ( 'NONE', *, *, #1481, .T. ) ; +#4620 = EDGE_CURVE ( 'NONE', #4014, #3528, #2212, .T. ) ; +#4621 = LINE ( 'NONE', #5088, #2344 ) ; +#4622 = EDGE_LOOP ( 'NONE', ( #3949, #3399 ) ) ; +#4623 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4624 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.49999999999999500, 40.00000000000001400 ) ) ; +#4625 = AXIS2_PLACEMENT_3D ( 'NONE', #5357, #2838, #246 ) ; +#4626 = ORIENTED_EDGE ( 'NONE', *, *, #1654, .F. ) ; +#4627 = ORIENTED_EDGE ( 'NONE', *, *, #946, .T. ) ; +#4628 = VERTEX_POINT ( 'NONE', #3438 ) ; +#4629 = CIRCLE ( 'NONE', #4520, 3.189999999999998600 ) ; +#4630 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4631 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 0.3968463715135260300, 4.186722739709247800E-015 ) ) ; +#4632 = ORIENTED_EDGE ( 'NONE', *, *, #184, .F. ) ; +#4633 = ORIENTED_EDGE ( 'NONE', *, *, #2532, .F. ) ; +#4634 = ADVANCED_FACE ( 'NONE', ( #4360 ), #5322, .F. ) ; +#4635 = CC_DESIGN_APPROVAL ( #4350, ( #3486 ) ) ; +#4636 = CYLINDRICAL_SURFACE ( 'NONE', #4159, 1.199999999999999700 ) ; +#4637 = ORIENTED_EDGE ( 'NONE', *, *, #2922, .F. ) ; +#4638 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -6.591949208711870900E-015, 77.50000000000001400 ) ) ; +#4639 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 13.15706502099696000, 20.68164927960128500 ) ) ; +#4640 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#4641 = CYLINDRICAL_SURFACE ( 'NONE', #2266, 2.500000000000000400 ) ; +#4642 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, -25.00000000000000000, 69.95000000000001700 ) ) ; +#4643 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#4644 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412000E-015, 8.392098876739385800, 12.84416783812201000 ) ) ; +#4645 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4646 = CIRCLE ( 'NONE', #1147, 2.500000000000002200 ) ; +#4647 = EDGE_CURVE ( 'NONE', #2959, #647, #928, .T. ) ; +#4648 = CIRCLE ( 'NONE', #3337, 3.189999999999998600 ) ; +#4649 = EDGE_CURVE ( 'NONE', #648, #4698, #1059, .T. ) ; +#4650 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -32.50000000000000000, 10.00000000000000500 ) ) ; +#4651 = CIRCLE ( 'NONE', #491, 1.250000000000001100 ) ; +#4652 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.387778780781444500E-015, 0.0000000000000000000 ) ) ; +#4653 = ORIENTED_EDGE ( 'NONE', *, *, #370, .T. ) ; +#4654 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -8.673617379884035500E-017, 1.000000000000000000 ) ) ; +#4655 = LINE ( 'NONE', #4311, #2514 ) ; +#4656 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 7.963758933632606200, 6.094017375525607100 ) ) ; +#4657 = CARTESIAN_POINT ( 'NONE', ( 1.917600380918127700E-013, 11.59274377325256800, 14.59033084019908500 ) ) ; +#4658 = ORIENTED_EDGE ( 'NONE', *, *, #2389, .F. ) ; +#4659 = CIRCLE ( 'NONE', #449, 3.189999999999998600 ) ; +#4660 = ADVANCED_FACE ( 'NONE', ( #4222 ), #24, .F. ) ; +#4661 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 2.612178009962130800, 3.528274353627085100 ) ) ; +#4662 = MECHANICAL_CONTEXT ( 'NONE', #1230, 'mechanical' ) ; +#4663 = AXIS2_PLACEMENT_3D ( 'NONE', #4707, #1272, #3833 ) ; +#4664 = VERTEX_POINT ( 'NONE', #4321 ) ; +#4665 = AXIS2_PLACEMENT_3D ( 'NONE', #3390, #3823, #1256 ) ; +#4666 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4667 = EDGE_LOOP ( 'NONE', ( #4671, #542, #3618, #3879, #5371, #2684 ) ) ; +#4668 = AXIS2_PLACEMENT_3D ( 'NONE', #3783, #1220, #4224 ) ; +#4669 = ORIENTED_EDGE ( 'NONE', *, *, #4620, .F. ) ; +#4670 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000002100, 0.9622770541854506200, 0.06331399171407615900 ) ) ; +#4671 = ORIENTED_EDGE ( 'NONE', *, *, #5174, .F. ) ; +#4672 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4673 = CARTESIAN_POINT ( 'NONE', ( 33.39999999999994200, 10.00000000000002000, 68.75000000000001400 ) ) ; +#4674 = ORIENTED_EDGE ( 'NONE', *, *, #1516, .T. ) ; +#4675 = EDGE_LOOP ( 'NONE', ( #838, #3938, #1805, #3524 ) ) ; +#4676 = EDGE_CURVE ( 'NONE', #924, #3810, #5202, .T. ) ; +#4677 = ORIENTED_EDGE ( 'NONE', *, *, #1694, .T. ) ; +#4678 = EDGE_CURVE ( 'NONE', #771, #924, #4083, .T. ) ; +#4679 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -24.99999999999997900, 68.75000000000001400 ) ) ; +#4680 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 14.99999999999999600, 40.00000000000001400 ) ) ; +#4681 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4682 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#4683 = VECTOR ( 'NONE', #4902, 1000.000000000000000 ) ; +#4684 = ORIENTED_EDGE ( 'NONE', *, *, #1561, .T. ) ; +#4685 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #666, #1072, #1959, #2825 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( -1.000003258862740000E-005, 0.0002867084790094652800 ), + .UNSPECIFIED. ) ; +#4686 = ORIENTED_EDGE ( 'NONE', *, *, #1115, .F. ) ; +#4687 = CARTESIAN_POINT ( 'NONE', ( 0.02772065198375365700, -5.354370225123637400, 75.37485200313467700 ) ) ; +#4688 = EDGE_CURVE ( 'NONE', #784, #3429, #2949, .T. ) ; +#4689 = ORIENTED_EDGE ( 'NONE', *, *, #19, .T. ) ; +#4690 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, -7.676334498985077900, 77.50000000000000000 ) ) ; +#4691 = DIRECTION ( 'NONE', ( -6.982962677686266700E-015, -3.469446951953619600E-016, 1.000000000000000000 ) ) ; +#4692 = CIRCLE ( 'NONE', #5309, 1.250000000000000200 ) ; +#4693 = ORIENTED_EDGE ( 'NONE', *, *, #1273, .T. ) ; +#4694 = ADVANCED_FACE ( 'NONE', ( #2069 ), #1664, .F. ) ; +#4695 = ORIENTED_EDGE ( 'NONE', *, *, #1445, .F. ) ; +#4696 = VERTEX_POINT ( 'NONE', #496 ) ; +#4697 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4698 = VERTEX_POINT ( 'NONE', #3509 ) ; +#4699 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4700 = LINE ( 'NONE', #5284, #1277 ) ; +#4701 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#4702 = AXIS2_PLACEMENT_3D ( 'NONE', #1631, #1555, #1537 ) ; +#4703 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 5.928593550334433700E-014, 8.936314941956774400E-029 ) ) ; +#4704 = VERTEX_POINT ( 'NONE', #934 ) ; +#4705 = ORIENTED_EDGE ( 'NONE', *, *, #4398, .F. ) ; +#4706 = VECTOR ( 'NONE', #4934, 1000.000000000000000 ) ; +#4707 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -25.50000000000000400, 24.99999999999999600 ) ) ; +#4708 = AXIS2_PLACEMENT_3D ( 'NONE', #4036, #1903, #4471 ) ; +#4709 = LINE ( 'NONE', #1235, #2294 ) ; +#4710 = CARTESIAN_POINT ( 'NONE', ( 34.24409906248181600, -9.886996285270917900, 76.79912110019961300 ) ) ; +#4711 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4712 = LINE ( 'NONE', #4507, #3694 ) ; +#4713 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -20.50000000000000400, 2.500000000000001300 ) ) ; +#4714 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -3.469446951953611000E-015, -1.000000000000000000 ) ) ; +#4715 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.224646799147276800E-016, 0.0000000000000000000 ) ) ; +#4716 = FACE_OUTER_BOUND ( 'NONE', #2744, .T. ) ; +#4717 = LINE ( 'NONE', #235, #3578 ) ; +#4718 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000004400, 10.06881883114113800, 10.32099150632419800 ) ) ; +#4719 = ADVANCED_FACE ( 'NONE', ( #2815 ), #1371, .F. ) ; +#4720 = CARTESIAN_POINT ( 'NONE', ( -1.530808498933859800E-016, 3.750000000000000900, 76.25000000000001400 ) ) ; +#4721 = EDGE_CURVE ( 'NONE', #2738, #1212, #514, .T. ) ; +#4722 = FACE_OUTER_BOUND ( 'NONE', #3531, .T. ) ; +#4723 = EDGE_CURVE ( 'NONE', #220, #776, #3948, .T. ) ; +#4724 = ORIENTED_EDGE ( 'NONE', *, *, #1482, .F. ) ; +#4725 = DIRECTION ( 'NONE', ( 1.734723475976806800E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#4726 = CARTESIAN_POINT ( 'NONE', ( 34.58012288934753500, -5.033068232482947700, 76.39771451534674900 ) ) ; +#4727 = CIRCLE ( 'NONE', #5305, 1.200000000000006600 ) ; +#4728 = DIRECTION ( 'NONE', ( -1.224646799147276800E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#4729 = CARTESIAN_POINT ( 'NONE', ( 3.061616997868240700E-015, -10.00000000000001200, 77.50000000000001400 ) ) ; +#4730 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4731 = FACE_OUTER_BOUND ( 'NONE', #1120, .T. ) ; +#4732 = EDGE_CURVE ( 'NONE', #1348, #3448, #5064, .T. ) ; +#4733 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4734 = CARTESIAN_POINT ( 'NONE', ( 37.50099999999998300, -25.50000000000000400, 8.699999999999995700 ) ) ; +#4735 = ORIENTED_EDGE ( 'NONE', *, *, #3664, .F. ) ; +#4736 = AXIS2_PLACEMENT_3D ( 'NONE', #5142, #2172, #4733 ) ; +#4737 = EDGE_LOOP ( 'NONE', ( #2468, #362, #5394, #1326, #5386 ) ) ; +#4738 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4739 = CARTESIAN_POINT ( 'NONE', ( 32.51846438475087100, -7.150115727673070700, 77.50019583923210600 ) ) ; +#4740 = VERTEX_POINT ( 'NONE', #2237 ) ; +#4741 = ADVANCED_FACE ( 'NONE', ( #3812 ), #2766, .F. ) ; +#4742 = ORIENTED_EDGE ( 'NONE', *, *, #2958, .T. ) ; +#4743 = CARTESIAN_POINT ( 'NONE', ( 1.806973009378941200E-014, -7.459310946700273700E-015, 75.00000000000001400 ) ) ; +#4744 = ORIENTED_EDGE ( 'NONE', *, *, #4398, .T. ) ; +#4745 = CARTESIAN_POINT ( 'NONE', ( 0.3678513576461581200, -15.00000000000000900, 76.30535135764617400 ) ) ; +#4746 = EDGE_LOOP ( 'NONE', ( #4757, #3930 ) ) ; +#4747 = EDGE_CURVE ( 'NONE', #2049, #5525, #1530, .T. ) ; +#4748 = EDGE_CURVE ( 'NONE', #2995, #3062, #4944, .T. ) ; +#4749 = VECTOR ( 'NONE', #2911, 1000.000000000000000 ) ; +#4750 = VERTEX_POINT ( 'NONE', #1893 ) ; +#4751 = ORIENTED_EDGE ( 'NONE', *, *, #4105, .F. ) ; +#4752 = ORIENTED_EDGE ( 'NONE', *, *, #3397, .F. ) ; +#4753 = FACE_BOUND ( 'NONE', #2598, .T. ) ; +#4754 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.224646799147275600E-016, 0.0000000000000000000 ) ) ; +#4755 = ORIENTED_EDGE ( 'NONE', *, *, #3353, .T. ) ; +#4756 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 9.757819552369541900E-016, 0.0000000000000000000 ) ) ; +#4757 = ORIENTED_EDGE ( 'NONE', *, *, #883, .F. ) ; +#4758 = ORIENTED_EDGE ( 'NONE', *, *, #5392, .F. ) ; +#4759 = CIRCLE ( 'NONE', #3646, 3.189999999999998600 ) ; +#4760 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4761 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4762 = ORIENTED_EDGE ( 'NONE', *, *, #9, .T. ) ; +#4763 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4764 = VECTOR ( 'NONE', #4699, 1000.000000000000000 ) ; +#4765 = AXIS2_PLACEMENT_3D ( 'NONE', #1948, #1935, #1922 ) ; +#4766 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#4767 = ADVANCED_FACE ( 'NONE', ( #384 ), #615, .F. ) ; +#4768 = AXIS2_PLACEMENT_3D ( 'NONE', #4045, #3633, #1066 ) ; +#4769 = CIRCLE ( 'NONE', #818, 1.250000000000001100 ) ; +#4770 = PLANE ( 'NONE', #956 ) ; +#4771 = CIRCLE ( 'NONE', #553, 1.199999999999999700 ) ; +#4772 = AXIS2_PLACEMENT_3D ( 'NONE', #5176, #4367, #1781 ) ; +#4773 = CIRCLE ( 'NONE', #3916, 1.250000000000000000 ) ; +#4774 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 14.99999999999999300, 40.00000000000001400 ) ) ; +#4775 = FACE_OUTER_BOUND ( 'NONE', #5492, .T. ) ; +#4776 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4777 = ORIENTED_EDGE ( 'NONE', *, *, #2622, .T. ) ; +#4778 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4779 = CIRCLE ( 'NONE', #810, 1.250000000000001100 ) ; +#4780 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4781 = CARTESIAN_POINT ( 'NONE', ( 9.857312847301881600E-014, 1.558336133786970800, 0.1776799487026949900 ) ) ; +#4782 = EDGE_CURVE ( 'NONE', #2814, #3322, #3674, .T. ) ; +#4783 = VECTOR ( 'NONE', #3799, 1000.000000000000000 ) ; +#4784 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, -15.00000000000000900, 75.00000000000001400 ) ) ; +#4785 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4786 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4787 = ADVANCED_FACE ( 'NONE', ( #243 ), #2548, .T. ) ; +#4788 = ORIENTED_EDGE ( 'NONE', *, *, #3076, .F. ) ; +#4789 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.224646799147276800E-016, 0.0000000000000000000 ) ) ; +#4790 = EDGE_CURVE ( 'NONE', #3265, #621, #2687, .T. ) ; +#4791 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999994300, 10.00000000000002000, 68.75000000000001400 ) ) ; +#4792 = VERTEX_POINT ( 'NONE', #1932 ) ; +#4793 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, -25.00000000000000000, 68.75000000000001400 ) ) ; +#4794 = AXIS2_PLACEMENT_3D ( 'NONE', #421, #4298, #2965 ) ; +#4795 = ORIENTED_EDGE ( 'NONE', *, *, #1884, .F. ) ; +#4796 = ORIENTED_EDGE ( 'NONE', *, *, #3353, .F. ) ; +#4797 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999998600, -19.99999999999998200, 77.50000000000001400 ) ) ; +#4798 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#4799 = ORIENTED_EDGE ( 'NONE', *, *, #565, .F. ) ; +#4800 = AXIS2_PLACEMENT_3D ( 'NONE', #1316, #3882, #881 ) ; +#4801 = LOCAL_TIME ( 17, 42, 40.00000000000000000, #368 ) ; +#4802 = ORIENTED_EDGE ( 'NONE', *, *, #3095, .F. ) ; +#4803 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, -25.00000000000000000, 71.94000000000001200 ) ) ; +#4804 = CARTESIAN_POINT ( 'NONE', ( 0.7534308387918431400, -9.887626195572275700, 76.79646748033825100 ) ) ; +#4805 = FACE_OUTER_BOUND ( 'NONE', #4481, .T. ) ; +#4806 = ORIENTED_EDGE ( 'NONE', *, *, #4331, .F. ) ; +#4807 = ORIENTED_EDGE ( 'NONE', *, *, #4579, .F. ) ; +#4808 = ORIENTED_EDGE ( 'NONE', *, *, #104, .F. ) ; +#4809 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4810 = VECTOR ( 'NONE', #1483, 1000.000000000000000 ) ; +#4811 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4812 = ORIENTED_EDGE ( 'NONE', *, *, #2818, .T. ) ; +#4813 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.08715574274765870700, -0.9961946980917455500 ) ) ; +#4814 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 8.786796564403578800, 0.0000000000000000000 ) ) ; +#4815 = EDGE_CURVE ( 'NONE', #5000, #3942, #4692, .T. ) ; +#4816 = ORIENTED_EDGE ( 'NONE', *, *, #33, .T. ) ; +#4817 = EDGE_CURVE ( 'NONE', #4020, #1390, #1399, .T. ) ; +#4818 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000001400, 3.724300801148543400, 4.533598119906335100 ) ) ; +#4819 = ORIENTED_EDGE ( 'NONE', *, *, #138, .F. ) ; +#4820 = ADVANCED_FACE ( 'NONE', ( #2411 ), #2276, .T. ) ; +#4821 = CYLINDRICAL_SURFACE ( 'NONE', #3552, 1.200000000000006600 ) ; +#4822 = CARTESIAN_POINT ( 'NONE', ( 34.99237459198600000, -9.475807161493875700, 75.22087482596339200 ) ) ; +#4823 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4824 = ORIENTED_EDGE ( 'NONE', *, *, #251, .F. ) ; +#4825 = EDGE_LOOP ( 'NONE', ( #5303, #3079, #3954, #1524, #2407, #914 ) ) ; +#4826 = CIRCLE ( 'NONE', #3476, 1.000000000000000900 ) ; +#4827 = PLANE ( 'NONE', #2400 ) ; +#4828 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999930300, -7.500000000000009800, 77.50000000000001400 ) ) ; +#4829 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4830 = EDGE_CURVE ( 'NONE', #4088, #2547, #3413, .T. ) ; +#4831 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#4832 = VECTOR ( 'NONE', #1064, 1000.000000000000000 ) ; +#4833 = AXIS2_PLACEMENT_3D ( 'NONE', #775, #1640, #4218 ) ; +#4834 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.224646799147276800E-016, 0.0000000000000000000 ) ) ; +#4835 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -14.99100622546988300, 21.20617812313072300 ) ) ; +#4836 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4837 = DIRECTION ( 'NONE', ( -1.224646799147353200E-016, 2.124423552260767000E-032, 1.000000000000000000 ) ) ; +#4838 = VECTOR ( 'NONE', #1895, 1000.000000000000000 ) ; +#4839 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000001400, 11.80190846150531100, 27.95631500732033500 ) ) ; +#4840 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 3.120083860505901400, 3.951072007102689900 ) ) ; +#4841 = AXIS2_PLACEMENT_3D ( 'NONE', #1080, #4079, #1505 ) ; +#4842 = CYLINDRICAL_SURFACE ( 'NONE', #5075, 0.5000000000000004400 ) ; +#4843 = VECTOR ( 'NONE', #669, 1000.000000000000000 ) ; +#4844 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -16.25000000000000700, 80.00000000000001400 ) ) ; +#4845 = LINE ( 'NONE', #1520, #3703 ) ; +#4846 = CARTESIAN_POINT ( 'NONE', ( 36.24999999999995700, 1.249999999999992500, 77.50000000000001400 ) ) ; +#4847 = ADVANCED_FACE ( 'NONE', ( #5512 ), #3275, .F. ) ; +#4848 = MANIFOLD_SOLID_BREP ( 'CBORE for M2 Hex Head Machine Screw2', #941 ) ; +#4849 = VERTEX_POINT ( 'NONE', #2841 ) ; +#4850 = EDGE_CURVE ( 'NONE', #2332, #3062, #4553, .T. ) ; +#4851 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#4852 = CIRCLE ( 'NONE', #4765, 1.199999999999999700 ) ; +#4853 = EDGE_CURVE ( 'NONE', #2547, #1609, #111, .T. ) ; +#4854 = PLANE ( 'NONE', #1965 ) ; +#4855 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.684197549492044600E-016, -1.000000000000000000 ) ) ; +#4856 = LINE ( 'NONE', #1709, #2593 ) ; +#4857 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 2.833029790246834900, 0.7126278726455161900 ) ) ; +#4858 = EDGE_CURVE ( 'NONE', #1413, #3583, #989, .T. ) ; +#4859 = ORIENTED_EDGE ( 'NONE', *, *, #654, .F. ) ; +#4860 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4861 = EDGE_LOOP ( 'NONE', ( #2282, #2933, #1464, #5509, #692, #3269 ) ) ; +#4862 = EDGE_LOOP ( 'NONE', ( #1051, #389, #5501, #1673, #2387, #783, #4340, #2796, #1771, #4365 ) ) ; +#4863 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -32.50000000000000000, -2.504387875345637900E-015 ) ) ; +#4864 = AXIS2_PLACEMENT_3D ( 'NONE', #3959, #3995, #3876 ) ; +#4865 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4866 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#4867 = ORIENTED_EDGE ( 'NONE', *, *, #5439, .T. ) ; +#4868 = AXIS2_PLACEMENT_3D ( 'NONE', #2582, #5529, #3001 ) ; +#4869 = FACE_BOUND ( 'NONE', #4875, .T. ) ; +#4870 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#4871 = ADVANCED_FACE ( 'NONE', ( #5382 ), #855, .F. ) ; +#4872 = ORIENTED_EDGE ( 'NONE', *, *, #119, .T. ) ; +#4873 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 8.450796550430963400, 6.915464947167524000 ) ) ; +#4874 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3702, #4968, #1567, #4574 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0002967085115975327500 ), + .UNSPECIFIED. ) ; +#4875 = EDGE_LOOP ( 'NONE', ( #1864, #799 ) ) ; +#4876 = AXIS2_PLACEMENT_3D ( 'NONE', #5367, #4568, #5388 ) ; +#4877 = CIRCLE ( 'NONE', #2944, 2.500000000000002200 ) ; +#4878 = ORIENTED_EDGE ( 'NONE', *, *, #2569, .F. ) ; +#4879 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 14.99999999999999300, 80.00000000000001400 ) ) ; +#4880 = VERTEX_POINT ( 'NONE', #3705 ) ; +#4881 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4882 = VERTEX_POINT ( 'NONE', #1143 ) ; +#4883 = CIRCLE ( 'NONE', #2870, 0.5000000000000004400 ) ; +#4884 = EDGE_LOOP ( 'NONE', ( #2201, #62, #5495, #3865 ) ) ; +#4885 = ORIENTED_EDGE ( 'NONE', *, *, #2786, .T. ) ; +#4886 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4887 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -30.00000000000001400, 58.79999999999999000 ) ) ; +#4888 = ORIENTED_EDGE ( 'NONE', *, *, #281, .T. ) ; +#4889 = ORIENTED_EDGE ( 'NONE', *, *, #874, .F. ) ; +#4890 = CARTESIAN_POINT ( 'NONE', ( -7.199102425303746900E-014, -7.500000000000009800, 78.75000000000001400 ) ) ; +#4891 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4892 = VECTOR ( 'NONE', #4241, 1000.000000000000000 ) ; +#4893 = EDGE_CURVE ( 'NONE', #2726, #20, #4290, .T. ) ; +#4894 = EDGE_CURVE ( 'NONE', #5105, #5312, #3140, .T. ) ; +#4895 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 10.00000000000002000, 69.95000000000001700 ) ) ; +#4896 = CARTESIAN_POINT ( 'NONE', ( 1.907836014928775600E-013, 10.05084256321175200, 10.28189984188755400 ) ) ; +#4897 = ORIENTED_EDGE ( 'NONE', *, *, #411, .T. ) ; +#4898 = VECTOR ( 'NONE', #390, 1000.000000000000000 ) ; +#4899 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4900 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -2.775557561562891400E-016 ) ) ; +#4901 = CIRCLE ( 'NONE', #5485, 0.5000000000000004400 ) ; +#4902 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4903 = ADVANCED_FACE ( 'NONE', ( #2000 ), #4149, .T. ) ; +#4904 = EDGE_CURVE ( 'NONE', #4604, #4973, #1863, .T. ) ; +#4905 = LINE ( 'NONE', #1034, #1487 ) ; +#4906 = AXIS2_PLACEMENT_3D ( 'NONE', #1552, #4557, #1985 ) ; +#4907 = FACE_OUTER_BOUND ( 'NONE', #4334, .T. ) ; +#4908 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4909 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4910 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -16.25000000000000700, 80.00000000000001400 ) ) ; +#4911 = VECTOR ( 'NONE', #1374, 1000.000000000000000 ) ; +#4912 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4913 = ORIENTED_EDGE ( 'NONE', *, *, #3138, .F. ) ; +#4914 = CC_DESIGN_SECURITY_CLASSIFICATION ( #3486, ( #2044 ) ) ; +#4915 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -32.40000000000000600, 33.80000000000000400 ) ) ; +#4916 = FACE_BOUND ( 'NONE', #3485, .T. ) ; +#4917 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4918 = TOROIDAL_SURFACE ( 'NONE', #4864, 1.250000000000002200, 1.250000000000000000 ) ; +#4919 = EDGE_CURVE ( 'NONE', #1576, #554, #4424, .T. ) ; +#4920 = CARTESIAN_POINT ( 'NONE', ( 34.95567043279326900, -15.26733039498112500, 75.47312975426329700 ) ) ; +#4921 = EDGE_CURVE ( 'NONE', #4664, #1001, #5133, .T. ) ; +#4922 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807100E-016 ) ) ; +#4923 = EDGE_LOOP ( 'NONE', ( #1108, #3341 ) ) ; +#4924 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -14.55080000000001100, 21.18695830425251000 ) ) ; +#4925 = ADVANCED_FACE ( 'NONE', ( #3011 ), #3877, .F. ) ; +#4926 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4927 = EDGE_LOOP ( 'NONE', ( #2612, #2146, #2688, #2157 ) ) ; +#4928 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -30.00000000000000700, 33.80000000000000400 ) ) ; +#4929 = VERTEX_POINT ( 'NONE', #1175 ) ; +#4930 = ORIENTED_EDGE ( 'NONE', *, *, #4723, .T. ) ; +#4931 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4932 = APPROVAL_DATE_TIME ( #504, #2334 ) ; +#4933 = EDGE_LOOP ( 'NONE', ( #2148, #4286 ) ) ; +#4934 = DIRECTION ( 'NONE', ( 6.982962677686267500E-015, -3.469446951953514100E-016, 1.000000000000000000 ) ) ; +#4935 = AXIS2_PLACEMENT_3D ( 'NONE', #268, #155, #148 ) ; +#4936 = CIRCLE ( 'NONE', #2843, 2.500000000000002200 ) ; +#4937 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 14.99999999994290100, 36.45205550348965300 ) ) ; +#4938 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#4939 = ORIENTED_EDGE ( 'NONE', *, *, #4518, .F. ) ; +#4940 = CARTESIAN_POINT ( 'NONE', ( 1.423961394327068800E-014, -20.00000000000000700, 76.25000000000001400 ) ) ; +#4941 = AXIS2_PLACEMENT_3D ( 'NONE', #3465, #894, #3899 ) ; +#4942 = ORIENTED_EDGE ( 'NONE', *, *, #1410, .T. ) ; +#4943 = ORIENTED_EDGE ( 'NONE', *, *, #3462, .F. ) ; +#4944 = CIRCLE ( 'NONE', #3912, 0.5000000000000004400 ) ; +#4945 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -19.99999999999998200, 78.75000000000001400 ) ) ; +#4946 = VERTEX_POINT ( 'NONE', #3741 ) ; +#4947 = AXIS2_PLACEMENT_3D ( 'NONE', #2484, #5434, #2915 ) ; +#4948 = VERTEX_POINT ( 'NONE', #4185 ) ; +#4949 = VERTEX_POINT ( 'NONE', #2042 ) ; +#4950 = FACE_OUTER_BOUND ( 'NONE', #503, .T. ) ; +#4951 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4952 = EDGE_CURVE ( 'NONE', #1212, #2422, #1591, .T. ) ; +#4953 = EDGE_CURVE ( 'NONE', #3426, #2616, #2742, .T. ) ; +#4954 = ORIENTED_EDGE ( 'NONE', *, *, #1980, .F. ) ; +#4955 = VERTEX_POINT ( 'NONE', #3332 ) ; +#4956 = CIRCLE ( 'NONE', #2905, 1.199999999999999700 ) ; +#4957 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 13.48907921226993700, 22.40081566134967500 ) ) ; +#4958 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4959 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4960 = LINE ( 'NONE', #1931, #3830 ) ; +#4961 = EDGE_CURVE ( 'NONE', #227, #4946, #570, .T. ) ; +#4962 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4963 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.734723475976805600E-016, 0.0000000000000000000 ) ) ; +#4964 = CIRCLE ( 'NONE', #66, 1.199999999999992600 ) ; +#4965 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.08715574274765870700, -0.9961946980917455500 ) ) ; +#4966 = CYLINDRICAL_SURFACE ( 'NONE', #3946, 1.250000000000001100 ) ; +#4967 = AXIS2_PLACEMENT_3D ( 'NONE', #5300, #182, #2339 ) ; +#4968 = CARTESIAN_POINT ( 'NONE', ( 34.83482033433745800, -9.996071295048832200, 76.14100086755226500 ) ) ; +#4969 = CIRCLE ( 'NONE', #2443, 1.250000000000001100 ) ; +#4970 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 7.754516936302128000, 11.18104856570499600 ) ) ; +#4971 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4972 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 10.00000000000002000, 68.75000000000001400 ) ) ; +#4973 = VERTEX_POINT ( 'NONE', #754 ) ; +#4974 = AXIS2_PLACEMENT_3D ( 'NONE', #1231, #592, #3174 ) ; +#4975 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -7.323665501014933600, 77.50000000000000000 ) ) ; +#4976 = VECTOR ( 'NONE', #2364, 1000.000000000000000 ) ; +#4977 = VECTOR ( 'NONE', #2185, 1000.000000000000000 ) ; +#4978 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#4979 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -16.25000000000000700, 78.75000000000001400 ) ) ; +#4980 = EDGE_LOOP ( 'NONE', ( #4819, #510, #2360, #2466 ) ) ; +#4981 = EDGE_CURVE ( 'NONE', #5401, #176, #2879, .T. ) ; +#4982 = ORIENTED_EDGE ( 'NONE', *, *, #3527, .T. ) ; +#4983 = EDGE_CURVE ( 'NONE', #5506, #3084, #4877, .T. ) ; +#4984 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 6.874777597852262700, 4.397346735330706300 ) ) ; +#4985 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4986 = ORIENTED_EDGE ( 'NONE', *, *, #2854, .F. ) ; +#4987 = CARTESIAN_POINT ( 'NONE', ( 1.555467961645667300, -5.535642111986337700, 77.31844400217562500 ) ) ; +#4988 = ORIENTED_EDGE ( 'NONE', *, *, #173, .F. ) ; +#4989 = ORIENTED_EDGE ( 'NONE', *, *, #4506, .T. ) ; +#4990 = CIRCLE ( 'NONE', #3300, 2.500000000000002200 ) ; +#4991 = EDGE_LOOP ( 'NONE', ( #1998, #3657, #4564, #3144, #4619, #4585, #5193, #3214 ) ) ; +#4992 = EDGE_CURVE ( 'NONE', #3083, #2726, #1728, .T. ) ; +#4993 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.50000000000000400, 26.19999999999999900 ) ) ; +#4994 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807100E-016 ) ) ; +#4995 = ORIENTED_EDGE ( 'NONE', *, *, #3387, .T. ) ; +#4996 = AXIS2_PLACEMENT_3D ( 'NONE', #3934, #1372, #4379 ) ; +#4997 = CIRCLE ( 'NONE', #3518, 1.200000000000006600 ) ; +#4998 = ORIENTED_EDGE ( 'NONE', *, *, #2208, .F. ) ; +#4999 = ORIENTED_EDGE ( 'NONE', *, *, #675, .T. ) ; +#5000 = VERTEX_POINT ( 'NONE', #2926 ) ; +#5001 = AXIS2_PLACEMENT_3D ( 'NONE', #5297, #1541, #3638 ) ; +#5002 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 4.350717155094251600, 1.696608667301722700 ) ) ; +#5003 = ORIENTED_EDGE ( 'NONE', *, *, #2091, .F. ) ; +#5004 = CARTESIAN_POINT ( 'NONE', ( 0.2767698315604377200, -7.430808288025160100E-015, 76.15657964874982600 ) ) ; +#5005 = FACE_OUTER_BOUND ( 'NONE', #4667, .T. ) ; +#5006 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#5007 = ORIENTED_EDGE ( 'NONE', *, *, #4992, .T. ) ; +#5008 = CARTESIAN_POINT ( 'NONE', ( 2.296212748401168500E-015, -15.00000000000000900, 76.25000000000001400 ) ) ; +#5009 = ORIENTED_EDGE ( 'NONE', *, *, #529, .F. ) ; +#5010 = ORIENTED_EDGE ( 'NONE', *, *, #2529, .T. ) ; +#5011 = CARTESIAN_POINT ( 'NONE', ( 34.79302742093491900, 0.02607153187713070000, 75.99969930912681100 ) ) ; +#5012 = CIRCLE ( 'NONE', #2227, 3.189999999999998600 ) ; +#5013 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999996400, -6.249999999999982200, 77.50000000000001400 ) ) ; +#5014 = ORIENTED_EDGE ( 'NONE', *, *, #639, .F. ) ; +#5015 = CARTESIAN_POINT ( 'NONE', ( 0.003274186659834884300, -9.343373805261553100, 75.13927510370882600 ) ) ; +#5016 = VECTOR ( 'NONE', #2521, 1000.000000000000000 ) ; +#5017 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5018 = EDGE_CURVE ( 'NONE', #3528, #4014, #4997, .T. ) ; +#5019 = EDGE_CURVE ( 'NONE', #3466, #324, #2614, .T. ) ; +#5020 = VECTOR ( 'NONE', #5056, 1000.000000000000000 ) ; +#5021 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.49999999999999100, 70.73143887112374300 ) ) ; +#5022 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 1.077861349600184100, 2.677202009793752300 ) ) ; +#5023 = CARTESIAN_POINT ( 'NONE', ( 1.776356839400259300E-014, 1.249999999999992700, 75.00000000000001400 ) ) ; +#5024 = VECTOR ( 'NONE', #3943, 1000.000000000000000 ) ; +#5025 = FACE_OUTER_BOUND ( 'NONE', #1849, .T. ) ; +#5026 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#5027 = CARTESIAN_POINT ( 'NONE', ( 1.734723475977559500E-015, 14.82648371134163600, 32.92676608843571300 ) ) ; +#5028 = CARTESIAN_POINT ( 'NONE', ( 34.90291286365119600, 13.18993461597468200, 69.11050372698886700 ) ) ; +#5029 = CIRCLE ( 'NONE', #2909, 1.250000000000001100 ) ; +#5030 = ADVANCED_FACE ( 'NONE', ( #2475 ), #312, .T. ) ; +#5031 = ORIENTED_EDGE ( 'NONE', *, *, #2861, .F. ) ; +#5032 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5033 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999998600, -18.74999999999998200, 77.50000000000001400 ) ) ; +#5034 = TOROIDAL_SURFACE ( 'NONE', #5480, 1.250000000000002200, 1.250000000000000000 ) ; +#5035 = AXIS2_PLACEMENT_3D ( 'NONE', #2216, #2240, #2250 ) ; +#5036 = AXIS2_PLACEMENT_3D ( 'NONE', #5307, #2370, #5327 ) ; +#5037 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -16.25000000000000700, 78.75000000000001400 ) ) ; +#5038 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 5.932754302729931300E-014, 0.0000000000000000000 ) ) ; +#5039 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -7.500000000000008000, 15.49999999999998600 ) ) ; +#5040 = CIRCLE ( 'NONE', #3444, 5.050799999999994400 ) ; +#5041 = AXIS2_PLACEMENT_3D ( 'NONE', #2228, #3515, #4780 ) ; +#5042 = CARTESIAN_POINT ( 'NONE', ( 33.39999999999999100, -24.99999999999997900, 71.94000000000001200 ) ) ; +#5043 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 10.70761355960509500, 21.18578706042741200 ) ) ; +#5044 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -24.99999999999997900, 71.94000000000001200 ) ) ; +#5045 = ORIENTED_EDGE ( 'NONE', *, *, #1273, .F. ) ; +#5046 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 6.659628599295405800, 8.884830459986519100 ) ) ; +#5047 = ORIENTED_EDGE ( 'NONE', *, *, #4782, .T. ) ; +#5048 = ORIENTED_EDGE ( 'NONE', *, *, #3661, .T. ) ; +#5049 = ORIENTED_EDGE ( 'NONE', *, *, #1733, .T. ) ; +#5050 = EDGE_LOOP ( 'NONE', ( #713, #1936, #2135, #2537 ) ) ; +#5051 = EDGE_CURVE ( 'NONE', #2792, #2745, #3607, .T. ) ; +#5052 = APPROVAL_PERSON_ORGANIZATION ( #628, #2334, #3817 ) ; +#5053 = ORIENTED_EDGE ( 'NONE', *, *, #1445, .T. ) ; +#5054 = ADVANCED_FACE ( 'NONE', ( #1332 ), #1662, .F. ) ; +#5055 = ORIENTED_EDGE ( 'NONE', *, *, #5051, .T. ) ; +#5056 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807100E-016 ) ) ; +#5057 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000001400, 7.195277099715650800, 4.892360736779454400 ) ) ; +#5058 = FACE_OUTER_BOUND ( 'NONE', #1204, .T. ) ; +#5059 = EDGE_LOOP ( 'NONE', ( #3120, #4724 ) ) ; +#5060 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -2.220446049250313400E-014, 80.00000000000001400 ) ) ; +#5061 = ORIENTED_EDGE ( 'NONE', *, *, #2457, .T. ) ; +#5062 = ORIENTED_EDGE ( 'NONE', *, *, #3888, .T. ) ; +#5063 = EDGE_CURVE ( 'NONE', #2745, #1729, #4599, .T. ) ; +#5064 = CIRCLE ( 'NONE', #2769, 2.500000000000002200 ) ; +#5065 = ORIENTED_EDGE ( 'NONE', *, *, #3171, .F. ) ; +#5066 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -14.99100622546988300, 16.15537812313072400 ) ) ; +#5067 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412800E-015, 1.698350258041666100, 2.923289477954946800 ) ) ; +#5068 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#5069 = AXIS2_PLACEMENT_3D ( 'NONE', #909, #3915, #1350 ) ; +#5070 = ORIENTED_EDGE ( 'NONE', *, *, #5232, .F. ) ; +#5071 = ORIENTED_EDGE ( 'NONE', *, *, #1836, .T. ) ; +#5072 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #944, #3517, #3087 ), + ( #75, #2664, #5199 ), + ( #2229, #4781, #1783 ), + ( #4370, #1362, #2728 ), + ( #5265, #2300, #4857 ), + ( #1859, #4440, #1433 ), + ( #3989, #999, #3576 ), + ( #552, #3136, #129 ), + ( #2715, #5247, #2286 ), + ( #4840, #1841, #4420 ), + ( #1418, #3977, #976 ), + ( #3591, #568, #3157 ), + ( #143, #4012, #1449 ), + ( #2134, #1696, #5109 ), + ( #4271, #2572, #4454 ), + ( #5517, #1033, #2753 ), + ( #157, #5280, #1470 ), + ( #4467, #1880, #4873 ), + ( #1015, #3481, #907 ), + ( #3868, #643, #1897 ), + ( #2333, #4896, #3605 ), + ( #3189, #1049, #1486 ), + ( #4489, #4050, #3624 ), + ( #1974, #4657, #1648 ), + ( #4227, #1222, #3785 ), + ( #782, #3363, #349 ), + ( #2932, #5455, #2506 ), + ( #5043, #2063, #4639 ), + ( #1629, #4205, #1203 ), + ( #3770, #759, #3340 ), + ( #331, #2917, #5435 ), + ( #2486, #5027, #2045 ), + ( #4615, #1612, #4188 ), + ( #1181, #3746, #742 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 2.656295322589485900E-017, 0.001313233773554278400, 0.001969850660331404600, 0.002626467547108530300, 0.003283084433885656100, 0.003939701320662782200, 0.005252935094217033700, 0.006566168867771286100, 0.007879402641325538400, 0.01050587018843404100, 0.01313233773554254400, 0.01575880528265104900, 0.01838527282975955400, 0.02101174037686805500, 0.02626467547108506100, 0.03151761056530207100, 0.04202348075373608200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865477900, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865477900, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865474600, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865474600, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#5073 = VECTOR ( 'NONE', #4391, 1000.000000000000000 ) ; +#5074 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.250000000000006200, 75.00000000000001400 ) ) ; +#5075 = AXIS2_PLACEMENT_3D ( 'NONE', #1144, #5377, #4562 ) ; +#5076 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5077 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.387778780781442500E-015, 0.0000000000000000000 ) ) ; +#5078 = ORIENTED_EDGE ( 'NONE', *, *, #2922, .T. ) ; +#5079 = VERTEX_POINT ( 'NONE', #815 ) ; +#5080 = CIRCLE ( 'NONE', #2038, 5.050799999999994400 ) ; +#5081 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -2.449200000000003800, 67.00000000000001400 ) ) ; +#5082 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 5.928593550334433700E-014, 8.936314941956774400E-029 ) ) ; +#5083 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5084 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5085 = LINE ( 'NONE', #4064, #4832 ) ; +#5086 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5087 = ADVANCED_FACE ( 'NONE', ( #3477 ), #45, .T. ) ; +#5088 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -12.55080000000000200, 67.00000000000001400 ) ) ; +#5089 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 1.249999999999987100, 80.00000000000001400 ) ) ; +#5090 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#5091 = EDGE_CURVE ( 'NONE', #4704, #2745, #3602, .T. ) ; +#5092 = LINE ( 'NONE', #3172, #1821 ) ; +#5093 = EDGE_CURVE ( 'NONE', #656, #2325, #2337, .T. ) ; +#5094 = CARTESIAN_POINT ( 'NONE', ( 0.06068526325125752500, -5.211640459173032100, 75.55091053768373400 ) ) ; +#5095 = CYLINDRICAL_SURFACE ( 'NONE', #3374, 2.500000000000002200 ) ; +#5096 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -2.775557561562891400E-016, 1.000000000000000000 ) ) ; +#5097 = CARTESIAN_POINT ( 'NONE', ( 32.51844889839645700, -7.849556821915791200, 77.50019388298295600 ) ) ; +#5098 = CARTESIAN_POINT ( 'NONE', ( 13.00000000000000200, -32.50000000000000700, 55.50000000000000700 ) ) ; +#5099 = LINE ( 'NONE', #2011, #1697 ) ; +#5100 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, -32.50000000000000700, 55.00000000000000700 ) ) ; +#5101 = CARTESIAN_POINT ( 'NONE', ( 1.715124499442895200E-014, 3.750000000000000900, 75.00000000000001400 ) ) ; +#5102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5103 = EDGE_CURVE ( 'NONE', #5363, #2049, #4614, .T. ) ; +#5104 = CARTESIAN_POINT ( 'NONE', ( 36.24999999999995700, -7.589415207398531000E-015, 77.50000000000001400 ) ) ; +#5105 = VERTEX_POINT ( 'NONE', #3041 ) ; +#5106 = AXIS2_PLACEMENT_3D ( 'NONE', #2119, #5096, #2558 ) ; +#5107 = LINE ( 'NONE', #2670, #681 ) ; +#5108 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000003600, 2.332475355679636000, 0.4696220608192912500 ) ) ; +#5109 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 6.576077339361165600, 4.036229364813984000 ) ) ; +#5110 = FACE_BOUND ( 'NONE', #310, .T. ) ; +#5111 = AXIS2_PLACEMENT_3D ( 'NONE', #3195, #1054, #5301 ) ; +#5112 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, 18.28184403566698200, 58.79999999999999700 ) ) ; +#5113 = CARTESIAN_POINT ( 'NONE', ( 34.57760357194301500, -9.966483227195173100, 76.40133273722256000 ) ) ; +#5114 = ADVANCED_FACE ( 'NONE', ( #1192 ), #5445, .T. ) ; +#5115 = ORIENTED_EDGE ( 'NONE', *, *, #974, .T. ) ; +#5116 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -20.50000000000000400, 1.035533905932739100 ) ) ; +#5117 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.500000000000003600, 72.05080000000001000 ) ) ; +#5118 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5119 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -35.00000000000000700, 72.50000000000001400 ) ) ; +#5120 = ORIENTED_EDGE ( 'NONE', *, *, #1797, .T. ) ; +#5121 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#5122 = EDGE_CURVE ( 'NONE', #1333, #4740, #2204, .T. ) ; +#5123 = VERTEX_POINT ( 'NONE', #2196 ) ; +#5124 = EDGE_CURVE ( 'NONE', #1862, #3668, #4354, .T. ) ; +#5125 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000003600, 11.06716854555538300, 12.97130010149599000 ) ) ; +#5126 = ORIENTED_EDGE ( 'NONE', *, *, #3278, .T. ) ; +#5127 = FACE_OUTER_BOUND ( 'NONE', #1365, .T. ) ; +#5128 = ORIENTED_EDGE ( 'NONE', *, *, #5018, .T. ) ; +#5129 = ORIENTED_EDGE ( 'NONE', *, *, #4141, .T. ) ; +#5130 = CARTESIAN_POINT ( 'NONE', ( 9.184850993604820600E-016, -5.000000000000006200, 76.25000000000001400 ) ) ; +#5131 = EDGE_CURVE ( 'NONE', #2867, #227, #1052, .T. ) ; +#5132 = CARTESIAN_POINT ( 'NONE', ( 34.24656916120824200, -5.112373804427720700, 76.79646748033816600 ) ) ; +#5133 = CIRCLE ( 'NONE', #340, 3.189999999999998600 ) ; +#5134 = VERTEX_POINT ( 'NONE', #479 ) ; +#5135 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -32.50000000000000700, 55.50000000000000700 ) ) ; +#5136 = ORIENTED_EDGE ( 'NONE', *, *, #3536, .F. ) ; +#5137 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5138 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.734723475976806800E-016, -1.000000000000000000 ) ) ; +#5139 = EDGE_LOOP ( 'NONE', ( #2737, #3933, #3998, #4413 ) ) ; +#5140 = CARTESIAN_POINT ( 'NONE', ( -4.716580992087254300E-005, -16.07635531368417100, 75.00910634871478100 ) ) ; +#5141 = FACE_OUTER_BOUND ( 'NONE', #5185, .T. ) ; +#5142 = CARTESIAN_POINT ( 'NONE', ( -1.250000000000001100, -6.250000000000006200, 77.50000000000001400 ) ) ; +#5143 = AXIS2_PLACEMENT_3D ( 'NONE', #3497, #3490, #3451 ) ; +#5144 = ORIENTED_EDGE ( 'NONE', *, *, #2991, .T. ) ; +#5145 = ORIENTED_EDGE ( 'NONE', *, *, #971, .T. ) ; +#5146 = ADVANCED_FACE ( 'NONE', ( #922 ), #3070, .F. ) ; +#5147 = CIRCLE ( 'NONE', #1061, 2.500000000000002200 ) ; +#5148 = CARTESIAN_POINT ( 'NONE', ( 34.93931473674872700, -9.788359540827016800, 75.55091053768380500 ) ) ; +#5149 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999996400, -6.249999999999982200, 77.50000000000001400 ) ) ; +#5150 = AXIS2_PLACEMENT_3D ( 'NONE', #3859, #1301, #4305 ) ; +#5151 = ORIENTED_EDGE ( 'NONE', *, *, #2151, .F. ) ; +#5152 = VECTOR ( 'NONE', #5457, 1000.000000000000000 ) ; +#5153 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5154 = AXIS2_PLACEMENT_3D ( 'NONE', #1615, #4623, #2048 ) ; +#5155 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000007800, -7.500000000000009800, 77.50000000000001400 ) ) ; +#5156 = CIRCLE ( 'NONE', #5220, 1.250000000000001100 ) ; +#5157 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.250000000000008000, 80.00000000000001400 ) ) ; +#5158 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5159 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.00000000000000000, 71.94000000000001200 ) ) ; +#5160 = LINE ( 'NONE', #4250, #5024 ) ; +#5161 = LINE ( 'NONE', #3347, #1757 ) ; +#5162 = CARTESIAN_POINT ( 'NONE', ( 32.49999999999998600, -30.00000000000001100, 77.50000000000002800 ) ) ; +#5163 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -14.99100622546988300, 21.20617812313071900 ) ) ; +#5164 = EDGE_CURVE ( 'NONE', #2686, #2140, #4214, .T. ) ; +#5165 = LINE ( 'NONE', #2661, #2908 ) ; +#5166 = EDGE_CURVE ( 'NONE', #4411, #554, #5314, .T. ) ; +#5167 = ORIENTED_EDGE ( 'NONE', *, *, #1874, .F. ) ; +#5168 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5169 = CYLINDRICAL_SURFACE ( 'NONE', #4384, 2.500000000000002200 ) ; +#5170 = ADVANCED_FACE ( 'NONE', ( #1461 ), #1930, .T. ) ; +#5171 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.224646799147276800E-016, 0.0000000000000000000 ) ) ; +#5172 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -35.00000000000000000, 38.19000000000000500 ) ) ; +#5173 = VECTOR ( 'NONE', #4691, 1000.000000000000000 ) ; +#5174 = EDGE_CURVE ( 'NONE', #1668, #4604, #2617, .T. ) ; +#5175 = AXIS2_PLACEMENT_3D ( 'NONE', #5037, #2497, #5447 ) ; +#5176 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, 1.249999999999993600, 78.75000000000001400 ) ) ; +#5177 = ORIENTED_EDGE ( 'NONE', *, *, #3527, .F. ) ; +#5178 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999998600, -18.74999999999998200, 77.50000000000001400 ) ) ; +#5179 = AXIS2_PLACEMENT_3D ( 'NONE', #125, #1833, #4416 ) ; +#5180 = ORIENTED_EDGE ( 'NONE', *, *, #3106, .F. ) ; +#5181 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #454 ) ) ; +#5182 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#5183 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5184 = ORIENTED_EDGE ( 'NONE', *, *, #2287, .F. ) ; +#5185 = EDGE_LOOP ( 'NONE', ( #1734, #3999, #3090, #4889 ) ) ; +#5186 = EDGE_LOOP ( 'NONE', ( #5177, #4358, #2209, #841 ) ) ; +#5187 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#5188 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#5189 = ORIENTED_EDGE ( 'NONE', *, *, #2570, .T. ) ; +#5190 = CARTESIAN_POINT ( 'NONE', ( 1.929437689293669100E-014, -5.000000000000006200, 75.00000000000001400 ) ) ; +#5191 = VERTEX_POINT ( 'NONE', #3952 ) ; +#5192 = EDGE_CURVE ( 'NONE', #4209, #1366, #4076, .T. ) ; +#5193 = ORIENTED_EDGE ( 'NONE', *, *, #1306, .T. ) ; +#5194 = EDGE_CURVE ( 'NONE', #2716, #4474, #5195, .T. ) ; +#5195 = LINE ( 'NONE', #3118, #781 ) ; +#5196 = ADVANCED_FACE ( 'NONE', ( #5058 ), #2809, .F. ) ; +#5197 = ORIENTED_EDGE ( 'NONE', *, *, #3123, .F. ) ; +#5198 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000700, -8.904811560692529300, 75.00000000000002800 ) ) ; +#5199 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 0.8052605628710212100, 1.128110453960240000E-014 ) ) ; +#5200 = ORIENTED_EDGE ( 'NONE', *, *, #4747, .F. ) ; +#5201 = ORIENTED_EDGE ( 'NONE', *, *, #3248, .F. ) ; +#5202 = LINE ( 'NONE', #48, #786 ) ; +#5203 = ORIENTED_EDGE ( 'NONE', *, *, #293, .T. ) ; +#5204 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5205 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891400E-016, -1.000000000000000000 ) ) ; +#5206 = ORIENTED_EDGE ( 'NONE', *, *, #564, .F. ) ; +#5207 = ORIENTED_EDGE ( 'NONE', *, *, #1633, .T. ) ; +#5208 = LINE ( 'NONE', #1381, #5073 ) ; +#5209 = ORIENTED_EDGE ( 'NONE', *, *, #1589, .T. ) ; +#5210 = ORIENTED_EDGE ( 'NONE', *, *, #5018, .F. ) ; +#5211 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995000, 5.000000000000024900, 77.50000000000001400 ) ) ; +#5212 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -7.500000000000008000, 15.49999999999998600 ) ) ; +#5213 = LINE ( 'NONE', #3125, #940 ) ; +#5214 = AXIS2_PLACEMENT_3D ( 'NONE', #2113, #4681, #1678 ) ; +#5215 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000700, 0.2208377860441252400, 2.500000000000000400 ) ) ; +#5216 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#5217 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5218 = AXIS2_PLACEMENT_3D ( 'NONE', #422, #3433, #2536 ) ; +#5219 = LINE ( 'NONE', #2743, #2964 ) ; +#5220 = AXIS2_PLACEMENT_3D ( 'NONE', #1259, #4262, #1687 ) ; +#5221 = CYLINDRICAL_SURFACE ( 'NONE', #5313, 2.500000000000002200 ) ; +#5222 = CARTESIAN_POINT ( 'NONE', ( 1.145213051021697100, -9.727816980728162500, 77.10676345234502100 ) ) ; +#5223 = ADVANCED_FACE ( 'NONE', ( #1793 ), #508, .F. ) ; +#5224 = CIRCLE ( 'NONE', #4242, 3.189999999999998600 ) ; +#5225 = EDGE_CURVE ( 'NONE', #554, #4361, #1656, .T. ) ; +#5226 = EDGE_CURVE ( 'NONE', #2530, #39, #3940, .T. ) ; +#5227 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5228 = CYLINDRICAL_SURFACE ( 'NONE', #4558, 1.199999999999999700 ) ; +#5229 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 4.845388067365528100, 5.865534891728382900 ) ) ; +#5230 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 14.99999999999999600, 40.00000000000001400 ) ) ; +#5231 = ORIENTED_EDGE ( 'NONE', *, *, #398, .T. ) ; +#5232 = EDGE_CURVE ( 'NONE', #2814, #2067, #2062, .T. ) ; +#5233 = FACE_BOUND ( 'NONE', #291, .T. ) ; +#5234 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.734723475976806800E-016, 0.0000000000000000000 ) ) ; +#5235 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.00000000000000000, 71.94000000000001200 ) ) ; +#5236 = CYLINDRICAL_SURFACE ( 'NONE', #3546, 0.5000000000000004400 ) ; +#5237 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, -6.591949208711870900E-015, 77.50000000000001400 ) ) ; +#5238 = AXIS2_PLACEMENT_3D ( 'NONE', #912, #854, #842 ) ; +#5239 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#5240 = CARTESIAN_POINT ( 'NONE', ( 2.755455298081397300E-015, -20.00000000000000700, 77.50000000000001400 ) ) ; +#5241 = EDGE_LOOP ( 'NONE', ( #4196, #3535, #1986, #144, #1138, #850 ) ) ; +#5242 = AXIS2_PLACEMENT_3D ( 'NONE', #2812, #216, #3236 ) ; +#5243 = ORIENTED_EDGE ( 'NONE', *, *, #3290, .F. ) ; +#5244 = ORIENTED_EDGE ( 'NONE', *, *, #2966, .T. ) ; +#5245 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000700, 12.49999999999999800, 36.53516280464774000 ) ) ; +#5246 = ADVANCED_FACE ( 'NONE', ( #633 ), #375, .T. ) ; +#5247 = CARTESIAN_POINT ( 'NONE', ( -1.402877217529599900E-013, 4.361336115036379200, 1.723337366069280100 ) ) ; +#5248 = EDGE_LOOP ( 'NONE', ( #1330, #2052, #2554, #3336 ) ) ; +#5249 = AXIS2_PLACEMENT_3D ( 'NONE', #1917, #3627, #2335 ) ; +#5250 = VERTEX_POINT ( 'NONE', #1021 ) ; +#5251 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#5252 = VERTEX_POINT ( 'NONE', #4018 ) ; +#5253 = FACE_OUTER_BOUND ( 'NONE', #3649, .T. ) ; +#5254 = ORIENTED_EDGE ( 'NONE', *, *, #1084, .F. ) ; +#5255 = ORIENTED_EDGE ( 'NONE', *, *, #4548, .T. ) ; +#5256 = CARTESIAN_POINT ( 'NONE', ( 1.530808498934341900E-016, 1.249999999999992700, 77.50000000000001400 ) ) ; +#5257 = VECTOR ( 'NONE', #694, 1000.000000000000000 ) ; +#5258 = ORIENTED_EDGE ( 'NONE', *, *, #1735, .F. ) ; +#5259 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#5260 = EDGE_CURVE ( 'NONE', #5000, #369, #3804, .T. ) ; +#5261 = ORIENTED_EDGE ( 'NONE', *, *, #4299, .T. ) ; +#5262 = EDGE_CURVE ( 'NONE', #1390, #1348, #4936, .T. ) ; +#5263 = ORIENTED_EDGE ( 'NONE', *, *, #2711, .T. ) ; +#5264 = VECTOR ( 'NONE', #1946, 1000.000000000000000 ) ; +#5265 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 1.689713844324290700, 2.938114192935033000 ) ) ; +#5266 = ORIENTED_EDGE ( 'NONE', *, *, #2923, .T. ) ; +#5267 = VERTEX_POINT ( 'NONE', #4879 ) ; +#5268 = CYLINDRICAL_SURFACE ( 'NONE', #768, 1.000000000000000900 ) ; +#5269 = CARTESIAN_POINT ( 'NONE', ( 3.061616997868437900E-016, -7.459310946700275200E-015, 77.50000000000001400 ) ) ; +#5270 = ADVANCED_FACE ( 'NONE', ( #2680, #4805 ), #1454, .F. ) ; +#5271 = EDGE_CURVE ( 'NONE', #1798, #2464, #1391, .T. ) ; +#5272 = ORIENTED_EDGE ( 'NONE', *, *, #2646, .T. ) ; +#5273 = LINE ( 'NONE', #4206, #5152 ) ; +#5274 = AXIS2_PLACEMENT_3D ( 'NONE', #31, #1354, #3494 ) ; +#5275 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, 9.999999999999994700, 69.95000000000001700 ) ) ; +#5276 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000007800, -7.500000000000009800, 80.00000000000001400 ) ) ; +#5277 = FACE_OUTER_BOUND ( 'NONE', #3325, .T. ) ; +#5278 = AXIS2_PLACEMENT_3D ( 'NONE', #3007, #3, #2585 ) ; +#5279 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 1.249999999999993600, 78.75000000000001400 ) ) ; +#5280 = CARTESIAN_POINT ( 'NONE', ( 3.903127820947816800E-015, 7.706902046436029600, 5.674581454342276600 ) ) ; +#5281 = CYLINDRICAL_SURFACE ( 'NONE', #2982, 2.500000000000002200 ) ; +#5282 = LINE ( 'NONE', #4176, #1153 ) ; +#5283 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999997200, -8.749999999999989300, 77.50000000000001400 ) ) ; +#5284 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -35.00000000000000700, 55.50000000000000700 ) ) ; +#5285 = CARTESIAN_POINT ( 'NONE', ( 3.699212843905351100E-016, -7.372574772901430200E-015, 77.50000000000001400 ) ) ; +#5286 = FACE_BOUND ( 'NONE', #4186, .T. ) ; +#5287 = ORIENTED_EDGE ( 'NONE', *, *, #985, .T. ) ; +#5288 = EDGE_CURVE ( 'NONE', #3499, #2530, #3665, .T. ) ; +#5289 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -2.449200000000003800, 67.00000000000001400 ) ) ; +#5290 = FACE_OUTER_BOUND ( 'NONE', #4150, .T. ) ; +#5291 = EDGE_CURVE ( 'NONE', #3078, #3480, #2541, .T. ) ; +#5292 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, 9.999999999999994700, 68.75000000000001400 ) ) ; +#5293 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#5294 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -12.55080000000000100, 79.99999999999997200 ) ) ; +#5295 = ADVANCED_FACE ( 'NONE', ( #233 ), #4546, .T. ) ; +#5296 = LINE ( 'NONE', #54, #4191 ) ; +#5297 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, 18.28184403566698200, 60.00000000000000700 ) ) ; +#5298 = ORIENTED_EDGE ( 'NONE', *, *, #2495, .T. ) ; +#5299 = CARTESIAN_POINT ( 'NONE', ( 26.25000000000000400, -30.00000000000001400, 58.79999999999999000 ) ) ; +#5300 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.999999999999994700, 68.75000000000001400 ) ) ; +#5301 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5302 = ORIENTED_EDGE ( 'NONE', *, *, #4059, .T. ) ; +#5303 = ORIENTED_EDGE ( 'NONE', *, *, #2053, .F. ) ; +#5304 = CARTESIAN_POINT ( 'NONE', ( 34.72323016843959200, -15.00000000000000900, 76.15657964874981200 ) ) ; +#5305 = AXIS2_PLACEMENT_3D ( 'NONE', #1720, #1703, #1685 ) ; +#5306 = CARTESIAN_POINT ( 'NONE', ( 33.39999999999994200, 10.00000000000002000, 68.75000000000001400 ) ) ; +#5307 = CARTESIAN_POINT ( 'NONE', ( -7.199102425303746900E-014, -7.500000000000009800, 78.75000000000001400 ) ) ; +#5308 = EDGE_LOOP ( 'NONE', ( #3258, #3892, #986, #4799 ) ) ; +#5309 = AXIS2_PLACEMENT_3D ( 'NONE', #2385, #5346, #2821 ) ; +#5310 = LOCAL_TIME ( 17, 42, 40.00000000000000000, #915 ) ; +#5311 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5312 = VERTEX_POINT ( 'NONE', #4055 ) ; +#5313 = AXIS2_PLACEMENT_3D ( 'NONE', #3988, #1857, #4438 ) ; +#5314 = CIRCLE ( 'NONE', #4388, 1.250000000000000200 ) ; +#5315 = APPROVAL_PERSON_ORGANIZATION ( #72, #4350, #2552 ) ; +#5316 = DIRECTION ( 'NONE', ( 1.734723475976806800E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#5317 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.00000000000000000, 69.95000000000003100 ) ) ; +#5318 = ORIENTED_EDGE ( 'NONE', *, *, #2570, .F. ) ; +#5319 = EDGE_CURVE ( 'NONE', #4849, #4234, #1260, .T. ) ; +#5320 = ORIENTED_EDGE ( 'NONE', *, *, #3123, .T. ) ; +#5321 = ADVANCED_FACE ( 'NONE', ( #3541 ), #3220, .F. ) ; +#5322 = CYLINDRICAL_SURFACE ( 'NONE', #733, 1.200000000000006600 ) ; +#5323 = ORIENTED_EDGE ( 'NONE', *, *, #2389, .T. ) ; +#5324 = CARTESIAN_POINT ( 'NONE', ( 34.99467660487319900, -15.58488680059969400, 75.17756506253815000 ) ) ; +#5325 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.49999999999999300, 80.00000000000001400 ) ) ; +#5326 = ORIENTED_EDGE ( 'NONE', *, *, #3461, .F. ) ; +#5327 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 2.775557561562891400E-016 ) ) ; +#5328 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 15.00000000000000900, 16.56854249492382500 ) ) ; +#5329 = FACE_OUTER_BOUND ( 'NONE', #2271, .T. ) ; +#5330 = EDGE_CURVE ( 'NONE', #4740, #4253, #106, .T. ) ; +#5331 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -15.00000000000000900, 78.75000000000001400 ) ) ; +#5332 = ORIENTED_EDGE ( 'NONE', *, *, #5356, .F. ) ; +#5333 = ORIENTED_EDGE ( 'NONE', *, *, #3472, .F. ) ; +#5334 = TOROIDAL_SURFACE ( 'NONE', #1749, 1.250000000000002200, 1.250000000000000000 ) ; +#5335 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999994300, 10.00000000000002000, 69.95000000000001700 ) ) ; +#5336 = ORIENTED_EDGE ( 'NONE', *, *, #5122, .T. ) ; +#5337 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884037900E-017 ) ) ; +#5338 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 14.99999999999999300, 80.00000000000001400 ) ) ; +#5339 = CIRCLE ( 'NONE', #2846, 1.250000000000001100 ) ; +#5340 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 1.249999999999992500, 75.00000000000001400 ) ) ; +#5341 = EDGE_CURVE ( 'NONE', #1077, #2129, #2269, .T. ) ; +#5342 = AXIS2_PLACEMENT_3D ( 'NONE', #10, #2181, #5153 ) ; +#5343 = FACE_OUTER_BOUND ( 'NONE', #1715, .T. ) ; +#5344 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -14.99100622546988300, 21.20617812313071900 ) ) ; +#5345 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 12.33041018015039300, 33.09054865480230500 ) ) ; +#5346 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5347 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5348 = VECTOR ( 'NONE', #5259, 1000.000000000000000 ) ; +#5349 = AXIS2_PLACEMENT_3D ( 'NONE', #4791, #286, #2875 ) ; +#5350 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5351 = EDGE_LOOP ( 'NONE', ( #2147, #3798, #4152, #1858 ) ) ; +#5352 = LINE ( 'NONE', #5230, #4116 ) ; +#5353 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 14.99999999999999600, 40.00000000000001400 ) ) ; +#5354 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, -15.00000000000000900, 77.50000000000001400 ) ) ; +#5355 = FACE_OUTER_BOUND ( 'NONE', #2692, .T. ) ; +#5356 = EDGE_CURVE ( 'NONE', #4062, #2813, #3405, .T. ) ; +#5357 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 1.249999999999993600, 78.75000000000001400 ) ) ; +#5358 = EDGE_CURVE ( 'NONE', #2876, #3889, #5504, .T. ) ; +#5359 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 13.15129256208882100, 20.65273868795251700 ) ) ; +#5360 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -30.00000000000000000, 80.00000000000000000 ) ) ; +#5361 = FACE_OUTER_BOUND ( 'NONE', #5365, .T. ) ; +#5362 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#5363 = VERTEX_POINT ( 'NONE', #2397 ) ; +#5364 = ORIENTED_EDGE ( 'NONE', *, *, #2957, .F. ) ; +#5365 = EDGE_LOOP ( 'NONE', ( #2928, #364, #2817, #2733 ) ) ; +#5366 = EDGE_CURVE ( 'NONE', #2074, #5312, #3268, .T. ) ; +#5367 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995700, 1.249999999999992700, 77.50000000000001400 ) ) ; +#5368 = ORIENTED_EDGE ( 'NONE', *, *, #794, .T. ) ; +#5369 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995000, 3.750000000000024900, 77.50000000000001400 ) ) ; +#5370 = AXIS2_PLACEMENT_3D ( 'NONE', #797, #2099, #5076 ) ; +#5371 = ORIENTED_EDGE ( 'NONE', *, *, #1695, .F. ) ; +#5372 = ORIENTED_EDGE ( 'NONE', *, *, #2851, .F. ) ; +#5373 = CARTESIAN_POINT ( 'NONE', ( 9.184850993604820600E-016, -5.000000000000006200, 76.25000000000001400 ) ) ; +#5374 = LINE ( 'NONE', #4570, #4142 ) ; +#5375 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 10.06934001109638800, 10.22699847274590800 ) ) ; +#5376 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#5377 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#5378 = AXIS2_PLACEMENT_3D ( 'NONE', #3237, #652, #3658 ) ; +#5379 = ORIENTED_EDGE ( 'NONE', *, *, #3738, .F. ) ; +#5380 = CARTESIAN_POINT ( 'NONE', ( 2.481551101603563000, -7.150443178084215000, 77.50019388298295600 ) ) ; +#5381 = ORIENTED_EDGE ( 'NONE', *, *, #3861, .T. ) ; +#5382 = FACE_OUTER_BOUND ( 'NONE', #455, .T. ) ; +#5383 = EDGE_LOOP ( 'NONE', ( #1250, #1266 ) ) ; +#5384 = CARTESIAN_POINT ( 'NONE', ( 2.602374448187987800E-015, -18.75000000000000700, 78.75000000000001400 ) ) ; +#5385 = VERTEX_POINT ( 'NONE', #5340 ) ; +#5386 = ORIENTED_EDGE ( 'NONE', *, *, #207, .T. ) ; +#5387 = VECTOR ( 'NONE', #4900, 1000.000000000000000 ) ; +#5388 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.734723475976806600E-016, 0.0000000000000000000 ) ) ; +#5389 = DIRECTION ( 'NONE', ( -1.110223024625155600E-014, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#5390 = DIRECTION ( 'NONE', ( 1.224646799147276800E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#5391 = EDGE_CURVE ( 'NONE', #3084, #4948, #2138, .T. ) ; +#5392 = EDGE_CURVE ( 'NONE', #4441, #2792, #2401, .T. ) ; +#5393 = EDGE_LOOP ( 'NONE', ( #787, #55, #911, #3736 ) ) ; +#5394 = ORIENTED_EDGE ( 'NONE', *, *, #4732, .T. ) ; +#5395 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3632, #5304, #4061, #1493, #4501, #1929, #4920, #2367, #5324, #2799, #205, #3226, #632, #3647 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0005157312470453519100, 0.0007735968705680461300, 0.001031462494090740500, 0.001547193741136155800, 0.001805059364658865100, 0.002062924988181574200 ), + .UNSPECIFIED. ) ; +#5396 = FACE_OUTER_BOUND ( 'NONE', #2487, .T. ) ; +#5397 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5398 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 4.016768471799840900, 4.857839419002123000 ) ) ; +#5399 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999997200, -8.749999999999989300, 77.50000000000001400 ) ) ; +#5400 = CARTESIAN_POINT ( 'NONE', ( 34.74776692697521000, -9.987243147919498300, 76.09432346314810000 ) ) ; +#5401 = VERTEX_POINT ( 'NONE', #3272 ) ; +#5402 = VECTOR ( 'NONE', #2507, 1000.000000000000000 ) ; +#5403 = EDGE_CURVE ( 'NONE', #3426, #3092, #1993, .T. ) ; +#5404 = CARTESIAN_POINT ( 'NONE', ( 1.148944794368810300, -5.274046340514280100, 77.10919263742587800 ) ) ; +#5405 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#5406 = CARTESIAN_POINT ( 'NONE', ( 13.00000000000000200, -35.00000000000000700, 72.50000000000001400 ) ) ; +#5407 = LINE ( 'NONE', #363, #475 ) ; +#5408 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -14.99100622546988300, 16.15537812313072400 ) ) ; +#5409 = CARTESIAN_POINT ( 'NONE', ( 0.2522330730247281400, -9.987243147919505400, 76.09432346314797300 ) ) ; +#5410 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5411 = LINE ( 'NONE', #1706, #3301 ) ; +#5412 = FACE_OUTER_BOUND ( 'NONE', #2999, .T. ) ; +#5413 = AXIS2_PLACEMENT_3D ( 'NONE', #3689, #3620, #3611 ) ; +#5414 = AXIS2_PLACEMENT_3D ( 'NONE', #3025, #443, #3454 ) ; +#5415 = FACE_OUTER_BOUND ( 'NONE', #617, .T. ) ; +#5416 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 3.630949495272574300, 1.183932273213859700 ) ) ; +#5417 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -30.00000000000001100, 72.50000000000001400 ) ) ; +#5418 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#5419 = ORIENTED_EDGE ( 'NONE', *, *, #5330, .F. ) ; +#5420 = AXIS2_PLACEMENT_3D ( 'NONE', #5408, #4157, #2886 ) ; +#5421 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5422 = CIRCLE ( 'NONE', #3514, 2.499999999999998700 ) ; +#5423 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -25.00000000000000000, 69.95000000000003100 ) ) ; +#5424 = CARTESIAN_POINT ( 'NONE', ( 34.67775721708254400, -7.149487470418330400E-015, 76.23085474022754200 ) ) ; +#5425 = LINE ( 'NONE', #249, #4332 ) ; +#5426 = CARTESIAN_POINT ( 'NONE', ( 5.729383794787290900E-017, -8.904708108629359100, 75.00000000000002800 ) ) ; +#5427 = ORIENTED_EDGE ( 'NONE', *, *, #1912, .F. ) ; +#5428 = EDGE_CURVE ( 'NONE', #4929, #1876, #3131, .T. ) ; +#5429 = EDGE_CURVE ( 'NONE', #4253, #4948, #5374, .T. ) ; +#5430 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 1.878278874330759500, 0.3053556101467290200 ) ) ; +#5431 = CARTESIAN_POINT ( 'NONE', ( 32.49999999999998600, -30.00000000000001100, 77.50000000000002800 ) ) ; +#5432 = ADVANCED_FACE ( 'NONE', ( #1856 ), #1997, .F. ) ; +#5433 = EDGE_LOOP ( 'NONE', ( #1006, #3553, #4346, #1586, #4686, #1509 ) ) ; +#5434 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#5435 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 14.28532677490257900, 27.66555439679573100 ) ) ; +#5436 = CARTESIAN_POINT ( 'NONE', ( 34.97167428080928200, 12.89417553273192700, 70.13869844314355400 ) ) ; +#5437 = EDGE_LOOP ( 'NONE', ( #5045, #5326, #3344, #2865, #1041 ) ) ; +#5438 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#5439 = EDGE_CURVE ( 'NONE', #3708, #648, #703, .T. ) ; +#5440 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#5441 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959413200E-015, 12.33032449970926200, 33.09234086739322600 ) ) ; +#5442 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.387778780781444500E-015, 0.0000000000000000000 ) ) ; +#5443 = EDGE_LOOP ( 'NONE', ( #638, #1453, #1666, #234 ) ) ; +#5444 = AXIS2_PLACEMENT_3D ( 'NONE', #673, #265, #3280 ) ; +#5445 = CYLINDRICAL_SURFACE ( 'NONE', #229, 2.500000000000002200 ) ; +#5446 = ORIENTED_EDGE ( 'NONE', *, *, #4723, .F. ) ; +#5447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5448 = AXIS2_PLACEMENT_3D ( 'NONE', #1496, #4066, #5347 ) ; +#5449 = VERTEX_POINT ( 'NONE', #4587 ) ; +#5450 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5451 = VECTOR ( 'NONE', #426, 1000.000000000000000 ) ; +#5452 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -14.55080000000001100, 21.18695830425251000 ) ) ; +#5453 = VERTEX_POINT ( 'NONE', #2455 ) ; +#5454 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000001400, 12.18208646404884400, 16.63498771253807700 ) ) ; +#5455 = CARTESIAN_POINT ( 'NONE', ( 1.899443848467589200E-013, 12.55077312455523100, 18.07074812167990200 ) ) ; +#5456 = ORIENTED_EDGE ( 'NONE', *, *, #2051, .F. ) ; +#5457 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.734723475976807100E-016, 4.814824860968089600E-032 ) ) ; +#5458 = FACE_OUTER_BOUND ( 'NONE', #1384, .T. ) ; +#5459 = ORIENTED_EDGE ( 'NONE', *, *, #251, .T. ) ; +#5460 = ORIENTED_EDGE ( 'NONE', *, *, #5225, .T. ) ; +#5461 = ADVANCED_FACE ( 'NONE', ( #5127 ), #1724, .F. ) ; +#5462 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412000E-015, 5.587269904025369300, 7.001022458818462200 ) ) ; +#5463 = VECTOR ( 'NONE', #71, 1000.000000000000000 ) ; +#5464 = VERTEX_POINT ( 'NONE', #3310 ) ; +#5465 = EDGE_CURVE ( 'NONE', #3404, #3256, #983, .T. ) ; +#5466 = EDGE_CURVE ( 'NONE', #4278, #716, #3996, .T. ) ; +#5467 = VECTOR ( 'NONE', #3971, 1000.000000000000000 ) ; +#5468 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 15.00000000000000000, 1.301042606982605300E-015 ) ) ; +#5469 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#5470 = CYLINDRICAL_SURFACE ( 'NONE', #3160, 1.250000000000001100 ) ; +#5471 = CYLINDRICAL_SURFACE ( 'NONE', #4772, 1.250000000000000000 ) ; +#5472 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000700, 6.345010636683837500, 3.743665432720744100 ) ) ; +#5473 = VECTOR ( 'NONE', #2351, 1000.000000000000000 ) ; +#5474 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5475 = ORIENTED_EDGE ( 'NONE', *, *, #5131, .T. ) ; +#5476 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 0.8696805551092118300, 2.612772046972403800 ) ) ; +#5477 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5478 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#5479 = TOROIDAL_SURFACE ( 'NONE', #3974, 1.250000000000002200, 1.250000000000000000 ) ; +#5480 = AXIS2_PLACEMENT_3D ( 'NONE', #28, #133, #829 ) ; +#5481 = AXIS2_PLACEMENT_3D ( 'NONE', #3488, #910, #3917 ) ; +#5482 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -6.095188439307478700, 75.00000000000002800 ) ) ; +#5483 = CIRCLE ( 'NONE', #1322, 1.199999999999999700 ) ; +#5484 = ADVANCED_FACE ( 'NONE', ( #5253 ), #297, .T. ) ; +#5485 = AXIS2_PLACEMENT_3D ( 'NONE', #5098, #2566, #5502 ) ; +#5486 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 2.775557561562891400E-016 ) ) ; +#5487 = LINE ( 'NONE', #3643, #966 ) ; +#5488 = CARTESIAN_POINT ( 'NONE', ( 0.005323395126807399500, 0.5848868005996754600, 75.17756506253813600 ) ) ; +#5489 = EDGE_CURVE ( 'NONE', #2731, #4234, #4990, .T. ) ; +#5490 = EDGE_CURVE ( 'NONE', #5385, #462, #3871, .T. ) ; +#5491 = CARTESIAN_POINT ( 'NONE', ( 32.50000000000000000, 14.18183703427750900, 26.82473691089231900 ) ) ; +#5492 = EDGE_LOOP ( 'NONE', ( #4238, #1933, #3566 ) ) ; +#5493 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -16.25000000000000700, 75.00000000000001400 ) ) ; +#5494 = ORIENTED_EDGE ( 'NONE', *, *, #281, .F. ) ; +#5495 = ORIENTED_EDGE ( 'NONE', *, *, #1225, .F. ) ; +#5496 = EDGE_LOOP ( 'NONE', ( #1327, #1276, #1116, #3872 ) ) ; +#5497 = CARTESIAN_POINT ( 'NONE', ( 0.1324136275346177700, -5.070899956024532300, 75.81454276716473800 ) ) ; +#5498 = EDGE_CURVE ( 'NONE', #2745, #2472, #566, .T. ) ; +#5499 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -30.00000000000001100, 80.00000000000000000 ) ) ; +#5500 = CARTESIAN_POINT ( 'NONE', ( 32.64578172483175700, -8.359081497935152400, 77.49676248852495100 ) ) ; +#5501 = ORIENTED_EDGE ( 'NONE', *, *, #3241, .F. ) ; +#5502 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5503 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -30.00000000000001100, 77.50000000000000000 ) ) ; +#5504 = CIRCLE ( 'NONE', #420, 3.189999999999998600 ) ; +#5505 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.999999999999994700, 65.56000000000001600 ) ) ; +#5506 = VERTEX_POINT ( 'NONE', #767 ) ; +#5507 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 5.928593550334433700E-014, 8.936314941956774400E-029 ) ) ; +#5508 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5509 = ORIENTED_EDGE ( 'NONE', *, *, #1655, .F. ) ; +#5510 = ORIENTED_EDGE ( 'NONE', *, *, #1308, .F. ) ; +#5511 = AXIS2_PLACEMENT_3D ( 'NONE', #1485, #1559, #1352 ) ; +#5512 = FACE_OUTER_BOUND ( 'NONE', #1784, .T. ) ; +#5513 = ORIENTED_EDGE ( 'NONE', *, *, #2243, .F. ) ; +#5514 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000003600, 3.589127622261201600, 1.147257863893478500 ) ) ; +#5515 = ADVANCED_FACE ( 'NONE', ( #4869, #2871, #1583, #3728, #2610, #1455, #303 ), #3349, .F. ) ; +#5516 = ORIENTED_EDGE ( 'NONE', *, *, #4538, .T. ) ; +#5517 = CARTESIAN_POINT ( 'NONE', ( 3.035766082959412400E-015, 5.352640783858350700, 6.633635335000893600 ) ) ; +#5518 = AXIS2_PLACEMENT_3D ( 'NONE', #3219, #4495, #3641 ) ; +#5519 = ORIENTED_EDGE ( 'NONE', *, *, #1767, .F. ) ; +#5520 = ORIENTED_EDGE ( 'NONE', *, *, #3698, .T. ) ; +#5521 = CYLINDRICAL_SURFACE ( 'NONE', #4708, 1.199999999999999700 ) ; +#5522 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5523 = AXIS2_PLACEMENT_3D ( 'NONE', #159, #1521, #4099 ) ; +#5524 = CARTESIAN_POINT ( 'NONE', ( 34.74776692697521000, -9.987243147919498300, 76.09432346314810000 ) ) ; +#5525 = VERTEX_POINT ( 'NONE', #1211 ) ; +#5526 = ORIENTED_EDGE ( 'NONE', *, *, #2713, .F. ) ; +#5527 = FACE_OUTER_BOUND ( 'NONE', #4146, .T. ) ; +#5528 = DIRECTION ( 'NONE', ( -1.224646799147353200E-016, -1.699538841808609900E-031, 1.000000000000000000 ) ) ; +#5529 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STEP/Hammer_Body.step b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Hammer_Body.step new file mode 100644 index 0000000..770e918 --- /dev/null +++ b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Hammer_Body.step @@ -0,0 +1,1998 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Hammer_Body.STEP', + '2013-11-10T07:41:56', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2 = EDGE_CURVE ( 'NONE', #1805, #404, #624, .T. ) ; +#3 = AXIS2_PLACEMENT_3D ( 'NONE', #1514, #1665, #455 ) ; +#4 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 7.500000000000003600, 1.250000000000001800 ) ) ; +#5 = ORIENTED_EDGE ( 'NONE', *, *, #1862, .F. ) ; +#6 = CARTESIAN_POINT ( 'NONE', ( 28.39411254969542900, 24.99999999999999600, -7.500000000000003600 ) ) ; +#7 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 9.562556682370381400, 6.250000000000001800 ) ) ; +#8 = ADVANCED_FACE ( 'NONE', ( #672 ), #535, .T. ) ; +#9 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11 = EDGE_CURVE ( 'NONE', #302, #878, #1433, .T. ) ; +#12 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000400, -7.499999999999992900, 18.75000000000000000 ) ) ; +#13 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.99999999999999600, -6.250000000000003600 ) ) ; +#14 = VERTEX_POINT ( 'NONE', #7 ) ; +#15 = AXIS2_PLACEMENT_3D ( 'NONE', #703, #1767, #857 ) ; +#16 = ORIENTED_EDGE ( 'NONE', *, *, #1556, .T. ) ; +#17 = LINE ( 'NONE', #652, #367 ) ; +#18 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, -7.499999999999992900, 13.75000000000000200 ) ) ; +#19 = DIRECTION ( 'NONE', ( 6.419766481290786900E-032, -2.312964634635743000E-016, -1.000000000000000000 ) ) ; +#20 = ORIENTED_EDGE ( 'NONE', *, *, #361, .T. ) ; +#21 = CYLINDRICAL_SURFACE ( 'NONE', #775, 1.200000000000000600 ) ; +#22 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 25.00000000000000000, -6.249999999999998200 ) ) ; +#23 = FACE_BOUND ( 'NONE', #1755, .T. ) ; +#24 = EDGE_CURVE ( 'NONE', #268, #1773, #578, .T. ) ; +#25 = ORIENTED_EDGE ( 'NONE', *, *, #853, .F. ) ; +#26 = VERTEX_POINT ( 'NONE', #306 ) ; +#27 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -9.999999999999998200, -11.25000000000000000 ) ) ; +#28 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#29 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, -51.40054944640257200, 2.168404344971007400E-016 ) ) ; +#30 = EDGE_CURVE ( 'NONE', #1328, #1343, #1835, .T. ) ; +#31 = AXIS2_PLACEMENT_3D ( 'NONE', #1027, #119, #1180 ) ; +#32 = CYLINDRICAL_SURFACE ( 'NONE', #966, 4.999999999999997300 ) ; +#33 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 24.99999999999999600, -7.500000000000003600 ) ) ; +#34 = PLANE ( 'NONE', #1331 ) ; +#35 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#36 = ORIENTED_EDGE ( 'NONE', *, *, #1206, .T. ) ; +#37 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#38 = LINE ( 'NONE', #1606, #1192 ) ; +#39 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#40 = CYLINDRICAL_SURFACE ( 'NONE', #1607, 1.200000000000000600 ) ; +#41 = EDGE_CURVE ( 'NONE', #1141, #843, #1789, .T. ) ; +#42 = EDGE_LOOP ( 'NONE', ( #868, #510, #97, #1299 ) ) ; +#43 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#44 = PLANE ( 'NONE', #760 ) ; +#45 = DATE_AND_TIME ( #442, #847 ) ; +#46 = ORIENTED_EDGE ( 'NONE', *, *, #1843, .F. ) ; +#47 = AXIS2_PLACEMENT_3D ( 'NONE', #1411, #508, #1103 ) ; +#48 = TOROIDAL_SURFACE ( 'NONE', #641, 12.50000000000000000, 5.000000000000000000 ) ; +#49 = LINE ( 'NONE', #934, #1777 ) ; +#50 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.445602896647339700E-016 ) ) ; +#51 = CIRCLE ( 'NONE', #916, 10.00000000000000000 ) ; +#52 = ORIENTED_EDGE ( 'NONE', *, *, #1487, .T. ) ; +#53 = ORIENTED_EDGE ( 'NONE', *, *, #715, .F. ) ; +#54 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, -51.40054944640257200, 13.75000000000000200 ) ) ; +#55 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -2.312964634635743400E-016, -1.000000000000000000 ) ) ; +#56 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#57 = AXIS2_PLACEMENT_3D ( 'NONE', #487, #1550, #638 ) ; +#58 = ORIENTED_EDGE ( 'NONE', *, *, #608, .F. ) ; +#59 = APPROVAL ( #990, 'UNSPECIFIED' ) ; +#60 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#62 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999994700, -9.999999999999998200, -6.250000000000001800 ) ) ; +#63 = ORIENTED_EDGE ( 'NONE', *, *, #121, .T. ) ; +#64 = ORIENTED_EDGE ( 'NONE', *, *, #1242, .F. ) ; +#65 = EDGE_CURVE ( 'NONE', #893, #268, #1389, .T. ) ; +#66 = CIRCLE ( 'NONE', #1960, 1.199999999999999700 ) ; +#67 = EDGE_LOOP ( 'NONE', ( #797, #982, #755, #1610 ) ) ; +#68 = FACE_OUTER_BOUND ( 'NONE', #1604, .T. ) ; +#69 = AXIS2_PLACEMENT_3D ( 'NONE', #213, #1280, #363 ) ; +#70 = VECTOR ( 'NONE', #1437, 1000.000000000000000 ) ; +#71 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 7.500000000000002700, 6.250000000000001800 ) ) ; +#72 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73 = ORIENTED_EDGE ( 'NONE', *, *, #1106, .F. ) ; +#74 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#76 = EDGE_CURVE ( 'NONE', #1783, #725, #977, .T. ) ; +#77 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#78 = CIRCLE ( 'NONE', #57, 10.00000000000000200 ) ; +#79 = PRODUCT ( 'Hammer_Body', 'Hammer_Body', '', ( #690 ) ) ; +#80 = APPROVAL_ROLE ( '' ) ; +#81 = PLANE ( 'NONE', #1261 ) ; +#82 = ORIENTED_EDGE ( 'NONE', *, *, #1862, .T. ) ; +#83 = CIRCLE ( 'NONE', #15, 1.843835023555569200 ) ; +#84 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999998200, -7.500000000000000000, -9.286680093072287100E-015 ) ) ; +#85 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 30.00000000000000400, -3.749999999999996400 ) ) ; +#86 = LINE ( 'NONE', #956, #1260 ) ; +#87 = ORIENTED_EDGE ( 'NONE', *, *, #269, .T. ) ; +#88 = PERSON_AND_ORGANIZATION ( #696, #892 ) ; +#89 = ORIENTED_EDGE ( 'NONE', *, *, #1024, .T. ) ; +#90 = DIRECTION ( 'NONE', ( -1.734723475976805600E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#91 = VECTOR ( 'NONE', #587, 1000.000000000000000 ) ; +#92 = ORIENTED_EDGE ( 'NONE', *, *, #1747, .T. ) ; +#93 = EDGE_CURVE ( 'NONE', #1396, #444, #484, .T. ) ; +#94 = CIRCLE ( 'NONE', #815, 5.000000000000004400 ) ; +#95 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 30.00000000000002100, -3.749999999999996400 ) ) ; +#96 = AXIS2_PLACEMENT_3D ( 'NONE', #490, #789, #1859 ) ; +#97 = ORIENTED_EDGE ( 'NONE', *, *, #111, .F. ) ; +#98 = VERTEX_POINT ( 'NONE', #1543 ) ; +#99 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.999999999999998200, -11.25000000000000000 ) ) ; +#100 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.99999999999999600, -8.700000000000002800 ) ) ; +#101 = ORIENTED_EDGE ( 'NONE', *, *, #904, .T. ) ; +#102 = EDGE_CURVE ( 'NONE', #1453, #563, #933, .T. ) ; +#103 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -4.999999999999994700, 13.74999999999999800 ) ) ; +#104 = AXIS2_PLACEMENT_3D ( 'NONE', #1814, #908, #1 ) ; +#105 = ORIENTED_EDGE ( 'NONE', *, *, #839, .F. ) ; +#106 = VERTEX_POINT ( 'NONE', #1846 ) ; +#107 = PLANE ( 'NONE', #126 ) ; +#108 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -51.40054944640257200, 13.75000000000000200 ) ) ; +#109 = CIRCLE ( 'NONE', #1765, 5.000000000000000000 ) ; +#110 = VERTEX_POINT ( 'NONE', #782 ) ; +#111 = EDGE_CURVE ( 'NONE', #110, #1958, #1907, .T. ) ; +#112 = FACE_OUTER_BOUND ( 'NONE', #1933, .T. ) ; +#113 = FACE_OUTER_BOUND ( 'NONE', #793, .T. ) ; +#114 = VECTOR ( 'NONE', #1446, 1000.000000000000000 ) ; +#115 = AXIS2_PLACEMENT_3D ( 'NONE', #699, #1764, #849 ) ; +#116 = PLANE ( 'NONE', #1441 ) ; +#117 = ORIENTED_EDGE ( 'NONE', *, *, #137, .T. ) ; +#118 = LINE ( 'NONE', #1718, #1235 ) ; +#119 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#120 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.561251128379126400E-016 ) ) ; +#121 = EDGE_CURVE ( 'NONE', #176, #630, #78, .T. ) ; +#122 = VECTOR ( 'NONE', #312, 1000.000000000000000 ) ; +#123 = ADVANCED_FACE ( 'NONE', ( #216 ), #1086, .F. ) ; +#124 = EDGE_CURVE ( 'NONE', #571, #870, #1290, .T. ) ; +#125 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, -7.500000000000000000, -1.015404183106069100E-014 ) ) ; +#126 = AXIS2_PLACEMENT_3D ( 'NONE', #1337, #421, #1482 ) ; +#127 = ORIENTED_EDGE ( 'NONE', *, *, #1785, .F. ) ; +#128 = FACE_OUTER_BOUND ( 'NONE', #67, .T. ) ; +#129 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995600, 28.31629120103541200, 17.13481703125290800 ) ) ; +#130 = ORIENTED_EDGE ( 'NONE', *, *, #675, .T. ) ; +#131 = ORIENTED_EDGE ( 'NONE', *, *, #1693, .F. ) ; +#132 = ADVANCED_FACE ( 'NONE', ( #1690 ), #1641, .F. ) ; +#133 = CIRCLE ( 'NONE', #31, 1.199999999999999700 ) ; +#134 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999996400, 28.66025403784437500, 8.750000000000000000 ) ) ; +#135 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 19.99999999999999600, 13.75000000000000400 ) ) ; +#136 = CONICAL_SURFACE ( 'NONE', #3, 2.500000000000000400, 0.08726646259971666800 ) ; +#137 = EDGE_CURVE ( 'NONE', #14, #1088, #1186, .T. ) ; +#138 = ORIENTED_EDGE ( 'NONE', *, *, #1456, .T. ) ; +#139 = VERTEX_POINT ( 'NONE', #332 ) ; +#140 = AXIS2_PLACEMENT_3D ( 'NONE', #1276, #360, #1432 ) ; +#141 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000000, 28.54540817480806700, 16.89241862229319900 ) ) ; +#142 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 7.500000000000003600, 1.250000000000001100 ) ) ; +#143 = ADVANCED_FACE ( 'NONE', ( #785 ), #44, .F. ) ; +#144 = VERTEX_POINT ( 'NONE', #1555 ) ; +#145 = PLANE ( 'NONE', #171 ) ; +#146 = ADVANCED_FACE ( 'NONE', ( #1600 ), #32, .T. ) ; +#147 = ORIENTED_EDGE ( 'NONE', *, *, #328, .T. ) ; +#148 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.561251128379126400E-016, -1.000000000000000000 ) ) ; +#149 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 20.00000000000000400, 1.250000000000003800 ) ) ; +#150 = CC_DESIGN_APPROVAL ( #59, ( #1931 ) ) ; +#151 = ORIENTED_EDGE ( 'NONE', *, *, #322, .F. ) ; +#152 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#153 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#154 = LINE ( 'NONE', #1548, #917 ) ; +#155 = ORIENTED_EDGE ( 'NONE', *, *, #1666, .F. ) ; +#156 = LINE ( 'NONE', #1726, #1732 ) ; +#157 = VECTOR ( 'NONE', #120, 1000.000000000000000 ) ; +#158 = ORIENTED_EDGE ( 'NONE', *, *, #1016, .F. ) ; +#159 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -14.99999999999999600, 13.75000000000000000 ) ) ; +#160 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#161 = EDGE_CURVE ( 'NONE', #1123, #467, #1746, .T. ) ; +#162 = ADVANCED_FACE ( 'NONE', ( #164 ), #1642, .F. ) ; +#163 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#164 = FACE_OUTER_BOUND ( 'NONE', #1784, .T. ) ; +#165 = DIRECTION ( 'NONE', ( -1.734723475976805600E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#166 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999600, 18.75000000000000000 ) ) ; +#167 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 2.168404344971008900E-016 ) ) ; +#168 = EDGE_CURVE ( 'NONE', #1444, #1719, #281, .T. ) ; +#169 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#170 = ORIENTED_EDGE ( 'NONE', *, *, #1705, .T. ) ; +#171 = AXIS2_PLACEMENT_3D ( 'NONE', #1209, #1365, #458 ) ; +#172 = ORIENTED_EDGE ( 'NONE', *, *, #505, .T. ) ; +#173 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1045, #1655, #1811, #899, #1959, #1050, #141, #1200, #286, #1360, #452, #1511, #598, #1664, #750, #1813 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3.469446951953614200E-018, 0.002026105581714178800, 0.004052211163428354200, 0.005065263954285438400, 0.005571790349713987900, 0.006078316745142536500, 0.007091369535999645000, 0.008104422326856753500 ), + .UNSPECIFIED. ) ; +#174 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -9.999999999999998200, -6.300000000000002500 ) ) ; +#175 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#176 = VERTEX_POINT ( 'NONE', #191 ) ; +#177 = LINE ( 'NONE', #1935, #992 ) ; +#178 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#179 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#180 = CYLINDRICAL_SURFACE ( 'NONE', #200, 4.999999999999997300 ) ; +#181 = VERTEX_POINT ( 'NONE', #509 ) ; +#182 = ORIENTED_EDGE ( 'NONE', *, *, #596, .T. ) ; +#183 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#184 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#185 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#186 = EDGE_CURVE ( 'NONE', #26, #1077, #386, .T. ) ; +#187 = AXIS2_PLACEMENT_3D ( 'NONE', #1717, #808, #1872 ) ; +#188 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#189 = ORIENTED_EDGE ( 'NONE', *, *, #732, .T. ) ; +#190 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#191 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, 28.66025403784438200, 8.750000000000000000 ) ) ; +#192 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 19.99999999999999600, 3.750000000000000000 ) ) ; +#193 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#194 = EDGE_CURVE ( 'NONE', #1701, #660, #736, .T. ) ; +#195 = ORIENTED_EDGE ( 'NONE', *, *, #1004, .F. ) ; +#196 = FACE_OUTER_BOUND ( 'NONE', #414, .T. ) ; +#197 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#198 = LOCAL_TIME ( 17, 41, 56.00000000000000000, #604 ) ; +#199 = ORIENTED_EDGE ( 'NONE', *, *, #1451, .F. ) ; +#200 = AXIS2_PLACEMENT_3D ( 'NONE', #1659, #1963, #902 ) ; +#201 = VECTOR ( 'NONE', #1836, 1000.000000000000000 ) ; +#202 = CIRCLE ( 'NONE', #996, 2.062556682370380000 ) ; +#203 = ORIENTED_EDGE ( 'NONE', *, *, #1908, .T. ) ; +#204 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999994700, -9.999999999999998200, -11.25000000000000000 ) ) ; +#205 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.561251128379126400E-016, 1.000000000000000000 ) ) ; +#206 = VECTOR ( 'NONE', #56, 1000.000000000000000 ) ; +#207 = ORIENTED_EDGE ( 'NONE', *, *, #1622, .F. ) ; +#208 = VERTEX_POINT ( 'NONE', #1118 ) ; +#209 = DIRECTION ( 'NONE', ( -1.734723475976808100E-016, -1.000000000000000000, 8.673617379884040400E-016 ) ) ; +#210 = EDGE_CURVE ( 'NONE', #1941, #1071, #1551, .T. ) ; +#211 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.99999999999999600, -7.500000000000003600 ) ) ; +#212 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.499999999999992900, 18.75000000000000000 ) ) ; +#213 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 19.99999999999999600, 18.75000000000000000 ) ) ; +#214 = PLANE ( 'NONE', #1680 ) ; +#215 = AXIS2_PLACEMENT_3D ( 'NONE', #1440, #374, #217 ) ; +#216 = FACE_OUTER_BOUND ( 'NONE', #1636, .T. ) ; +#217 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -3.469446951953614200E-016 ) ) ; +#218 = EDGE_CURVE ( 'NONE', #1947, #1752, #1460, .T. ) ; +#219 = ORIENTED_EDGE ( 'NONE', *, *, #1792, .F. ) ; +#220 = VECTOR ( 'NONE', #1148, 1000.000000000000000 ) ; +#221 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#222 = ORIENTED_EDGE ( 'NONE', *, *, #1037, .F. ) ; +#223 = EDGE_CURVE ( 'NONE', #1522, #1357, #1953, .T. ) ; +#224 = ORIENTED_EDGE ( 'NONE', *, *, #1747, .F. ) ; +#225 = ORIENTED_EDGE ( 'NONE', *, *, #259, .T. ) ; +#226 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#227 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -9.999999999999994700, 13.74999999999999800 ) ) ; +#228 = LINE ( 'NONE', #1477, #1398 ) ; +#229 = AXIS2_PLACEMENT_3D ( 'NONE', #427, #1492, #579 ) ; +#230 = CIRCLE ( 'NONE', #1772, 12.50000000000000000 ) ; +#231 = DATE_TIME_ROLE ( 'creation_date' ) ; +#232 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.349229370204183400E-016, -9.540486298584920700E-032 ) ) ; +#233 = ORIENTED_EDGE ( 'NONE', *, *, #539, .T. ) ; +#234 = ORIENTED_EDGE ( 'NONE', *, *, #1129, .T. ) ; +#235 = CARTESIAN_POINT ( 'NONE', ( -10.00000000000000000, 0.0000000000000000000, 13.74999999999999800 ) ) ; +#236 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 30.00000000000000000, 3.750000000000000000 ) ) ; +#237 = EDGE_CURVE ( 'NONE', #946, #1394, #1794, .T. ) ; +#238 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#239 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 7.500000000000002700, 6.250000000000001800 ) ) ; +#240 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999300, -9.999999999999998200, -6.300000000000002500 ) ) ; +#241 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -2.312964634635743000E-016, -1.000000000000000000 ) ) ; +#242 = ORIENTED_EDGE ( 'NONE', *, *, #1734, .F. ) ; +#243 = FACE_OUTER_BOUND ( 'NONE', #1880, .T. ) ; +#244 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 25.00000000000000000, -6.249999999999998200 ) ) ; +#245 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#246 = ORIENTED_EDGE ( 'NONE', *, *, #1674, .T. ) ; +#247 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#248 = EDGE_LOOP ( 'NONE', ( #1132, #1334, #959, #546 ) ) ; +#249 = VECTOR ( 'NONE', #1682, 1000.000000000000000 ) ; +#250 = ORIENTED_EDGE ( 'NONE', *, *, #539, .F. ) ; +#251 = LINE ( 'NONE', #1882, #1377 ) ; +#252 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.561251128379126400E-016, -1.000000000000000000 ) ) ; +#253 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#254 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1196, #1144, ( #1931 ) ) ; +#255 = ORIENTED_EDGE ( 'NONE', *, *, #1843, .T. ) ; +#256 = EDGE_LOOP ( 'NONE', ( #1962, #1294, #643, #1082 ) ) ; +#257 = PLANE ( 'NONE', #1903 ) ; +#258 = VECTOR ( 'NONE', #153, 1000.000000000000000 ) ; +#259 = EDGE_CURVE ( 'NONE', #1101, #1090, #1537, .T. ) ; +#260 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 30.00000000000000400, -3.749999999999996400 ) ) ; +#261 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#262 = ORIENTED_EDGE ( 'NONE', *, *, #1106, .T. ) ; +#263 = FACE_OUTER_BOUND ( 'NONE', #972, .T. ) ; +#264 = ADVANCED_FACE ( 'NONE', ( #196 ), #214, .T. ) ; +#265 = EDGE_LOOP ( 'NONE', ( #1849, #63, #567, #1904, #395, #806 ) ) ; +#266 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000000, -3.750000000000001800 ) ) ; +#267 = FACE_OUTER_BOUND ( 'NONE', #1308, .T. ) ; +#268 = VERTEX_POINT ( 'NONE', #671 ) ; +#269 = EDGE_CURVE ( 'NONE', #660, #1357, #983, .T. ) ; +#270 = LINE ( 'NONE', #1615, #1035 ) ; +#271 = FACE_OUTER_BOUND ( 'NONE', #480, .T. ) ; +#272 = FACE_OUTER_BOUND ( 'NONE', #617, .T. ) ; +#273 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, -4.999999999999994700, 13.74999999999999800 ) ) ; +#274 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#275 = EDGE_LOOP ( 'NONE', ( #1368, #1540, #327, #665 ) ) ; +#276 = ORIENTED_EDGE ( 'NONE', *, *, #1955, .F. ) ; +#277 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 27.82163395312600700, 17.59678115718987700 ) ) ; +#278 = ADVANCED_FACE ( 'NONE', ( #263 ), #1893, .T. ) ; +#279 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#280 = DIRECTION ( 'NONE', ( 1.000000000000000000, -9.020562075079395300E-015, 0.0000000000000000000 ) ) ; +#281 = CIRCLE ( 'NONE', #667, 5.000000000000000900 ) ; +#282 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999300, -9.999999999999998200, -7.500000000000003600 ) ) ; +#283 = EDGE_CURVE ( 'NONE', #812, #1773, #678, .T. ) ; +#284 = ADVANCED_FACE ( 'NONE', ( #1841 ), #1700, .T. ) ; +#285 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.561251128379126400E-016 ) ) ; +#286 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000400, 28.93715134656288900, 16.34007055127996100 ) ) ; +#287 = AXIS2_PLACEMENT_3D ( 'NONE', #1097, #37, #1238 ) ; +#288 = VERTEX_POINT ( 'NONE', #835 ) ; +#289 = VECTOR ( 'NONE', #1621, 1000.000000000000000 ) ; +#290 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.561251128379126400E-016 ) ) ; +#291 = ORIENTED_EDGE ( 'NONE', *, *, #1206, .F. ) ; +#292 = PERSON_AND_ORGANIZATION ( #696, #892 ) ; +#293 = ORIENTED_EDGE ( 'NONE', *, *, #581, .T. ) ; +#294 = LINE ( 'NONE', #627, #962 ) ; +#295 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -2.312964634635743400E-016, -1.000000000000000000 ) ) ; +#296 = ORIENTED_EDGE ( 'NONE', *, *, #1501, .T. ) ; +#297 = CYLINDRICAL_SURFACE ( 'NONE', #1740, 10.00000000000000000 ) ; +#298 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.500000000000003600, 1.250000000000001100 ) ) ; +#299 = CARTESIAN_POINT ( 'NONE', ( 28.39411254969542900, -9.999999999999998200, -6.300000000000002500 ) ) ; +#300 = EDGE_CURVE ( 'NONE', #516, #1938, #543, .T. ) ; +#301 = ADVANCED_FACE ( 'NONE', ( #128 ), #1646, .T. ) ; +#302 = VERTEX_POINT ( 'NONE', #1449 ) ; +#303 = ORIENTED_EDGE ( 'NONE', *, *, #1791, .F. ) ; +#304 = PLANE ( 'NONE', #488 ) ; +#305 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999993800, -9.999999999999998200, -8.700000000000002800 ) ) ; +#306 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 25.00000000000000000, -11.25000000000000400 ) ) ; +#307 = ORIENTED_EDGE ( 'NONE', *, *, #1637, .T. ) ; +#308 = ADVANCED_FACE ( 'NONE', ( #888 ), #1244, .T. ) ; +#309 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -4.999999999999998200, -6.250000000000001800 ) ) ; +#310 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999993800, -14.99999999999999800, -6.250000000000005300 ) ) ; +#311 = EDGE_CURVE ( 'NONE', #106, #1538, #1030, .T. ) ; +#312 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#313 = AXIS2_PLACEMENT_3D ( 'NONE', #227, #1135, #1292 ) ; +#314 = EDGE_LOOP ( 'NONE', ( #117, #919 ) ) ; +#315 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.541976423090495600E-016, -9.986303415341224300E-032 ) ) ; +#316 = ORIENTED_EDGE ( 'NONE', *, *, #102, .T. ) ; +#317 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#318 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#319 = LINE ( 'NONE', #1265, #1488 ) ; +#320 = ORIENTED_EDGE ( 'NONE', *, *, #1908, .F. ) ; +#321 = LINE ( 'NONE', #1005, #1851 ) ; +#322 = EDGE_CURVE ( 'NONE', #1522, #1701, #491, .T. ) ; +#323 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #1931 ) ; +#324 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 2.312964634635743400E-016, 1.000000000000000000 ) ) ; +#325 = VECTOR ( 'NONE', #238, 1000.000000000000000 ) ; +#326 = EDGE_LOOP ( 'NONE', ( #1182, #677, #454, #1915 ) ) ; +#327 = ORIENTED_EDGE ( 'NONE', *, *, #161, .T. ) ; +#328 = EDGE_CURVE ( 'NONE', #1333, #337, #438, .T. ) ; +#329 = AXIS2_PLACEMENT_3D ( 'NONE', #883, #1950, #1036 ) ; +#330 = VECTOR ( 'NONE', #1716, 1000.000000000000000 ) ; +#331 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.308220447633426100E-016, 1.000000000000000000 ) ) ; +#332 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000000, -7.499999999999996400, 13.75000000000000200 ) ) ; +#333 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999300, -9.999999999999998200, -6.250000000000006200 ) ) ; +#334 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#335 = EDGE_CURVE ( 'NONE', #1104, #144, #38, .T. ) ; +#336 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#337 = VERTEX_POINT ( 'NONE', #1912 ) ; +#338 = VECTOR ( 'NONE', #1469, 1000.000000000000000 ) ; +#339 = EDGE_LOOP ( 'NONE', ( #225, #1762, #1699, #800 ) ) ; +#340 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#341 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.349229370204183400E-016, -9.540486298584920700E-032 ) ) ; +#342 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 19.99999999999999600, 13.75000000000000000 ) ) ; +#343 = ORIENTED_EDGE ( 'NONE', *, *, #431, .T. ) ; +#344 = FACE_OUTER_BOUND ( 'NONE', #947, .T. ) ; +#345 = ORIENTED_EDGE ( 'NONE', *, *, #596, .F. ) ; +#346 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 30.00000000000002100, -3.749999999999996400 ) ) ; +#347 = FACE_OUTER_BOUND ( 'NONE', #1629, .T. ) ; +#348 = ORIENTED_EDGE ( 'NONE', *, *, #1076, .F. ) ; +#349 = VERTEX_POINT ( 'NONE', #236 ) ; +#350 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 30.00000000000001400, 43.68416490252569400 ) ) ; +#351 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 24.99999999999999600, -7.500000000000003600 ) ) ; +#352 = AXIS2_PLACEMENT_3D ( 'NONE', #29, #1698, #787 ) ; +#353 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #1562, #231, ( #1931 ) ) ; +#354 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.999999999999994700, 13.74999999999999800 ) ) ; +#355 = CARTESIAN_POINT ( 'NONE', ( -10.00000000000000200, -14.99999999999999600, 13.75000000000000000 ) ) ; +#356 = ORIENTED_EDGE ( 'NONE', *, *, #813, .F. ) ; +#357 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 19.99999999999999600, -6.250000000000001800 ) ) ; +#358 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#359 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#360 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#361 = EDGE_CURVE ( 'NONE', #591, #1704, #1559, .T. ) ; +#362 = ORIENTED_EDGE ( 'NONE', *, *, #581, .F. ) ; +#363 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#364 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.561251128379126400E-016 ) ) ; +#365 = ORIENTED_EDGE ( 'NONE', *, *, #415, .F. ) ; +#366 = AXIS2_PLACEMENT_3D ( 'NONE', #1744, #828, #1892 ) ; +#367 = VECTOR ( 'NONE', #1113, 1000.000000000000000 ) ; +#368 = ORIENTED_EDGE ( 'NONE', *, *, #1946, .F. ) ; +#369 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#370 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 0.0000000000000000000, 18.75000000000000000 ) ) ; +#371 = VECTOR ( 'NONE', #387, 1000.000000000000000 ) ; +#372 = CIRCLE ( 'NONE', #558, 1.199999999999999700 ) ; +#373 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 30.00000000000000000, -3.749999999999995100 ) ) ; +#374 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -2.312964634635743400E-016, -1.000000000000000000 ) ) ; +#375 = ORIENTED_EDGE ( 'NONE', *, *, #1146, .T. ) ; +#376 = ORIENTED_EDGE ( 'NONE', *, *, #1763, .T. ) ; +#377 = EDGE_CURVE ( 'NONE', #1473, #1205, #83, .T. ) ; +#378 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #540 ) ; +#379 = CARTESIAN_POINT ( 'NONE', ( 28.39411254969542900, 24.99999999999999600, -6.300000000000002500 ) ) ; +#380 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#381 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#382 = AXIS2_PLACEMENT_3D ( 'NONE', #603, #757, #1521 ) ; +#383 = VECTOR ( 'NONE', #958, 1000.000000000000000 ) ; +#384 = APPROVAL_ROLE ( '' ) ; +#385 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.561251128379126400E-016, -1.000000000000000000 ) ) ; +#386 = LINE ( 'NONE', #1105, #383 ) ; +#387 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#388 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999997300, 29.68245836551854600, 14.09309252513984000 ) ) ; +#389 = VERTEX_POINT ( 'NONE', #398 ) ; +#390 = LINE ( 'NONE', #712, #1102 ) ; +#391 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#392 = ORIENTED_EDGE ( 'NONE', *, *, #283, .F. ) ; +#393 = EDGE_CURVE ( 'NONE', #516, #1855, #1605, .T. ) ; +#394 = LOCAL_TIME ( 17, 41, 56.00000000000000000, #796 ) ; +#395 = ORIENTED_EDGE ( 'NONE', *, *, #11, .F. ) ; +#396 = ORIENTED_EDGE ( 'NONE', *, *, #952, .F. ) ; +#397 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.156482317317871200E-016 ) ) ; +#398 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995600, 29.68245836551852800, 13.75000000000000200 ) ) ; +#399 = FACE_OUTER_BOUND ( 'NONE', #437, .T. ) ; +#400 = AXIS2_PLACEMENT_3D ( 'NONE', #333, #499, #1248 ) ; +#401 = VECTOR ( 'NONE', #1526, 1000.000000000000000 ) ; +#402 = VECTOR ( 'NONE', #940, 1000.000000000000000 ) ; +#403 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -15.00000000000000000, -3.750000000000001800 ) ) ; +#404 = VERTEX_POINT ( 'NONE', #240 ) ; +#405 = ORIENTED_EDGE ( 'NONE', *, *, #1388, .T. ) ; +#406 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#407 = EDGE_CURVE ( 'NONE', #1168, #1191, #1152, .T. ) ; +#408 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.561251128379126400E-016 ) ) ; +#409 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -4.999999999999999100, 1.249999999999999800 ) ) ; +#410 = AXIS2_PLACEMENT_3D ( 'NONE', #474, #1534, #625 ) ; +#411 = ORIENTED_EDGE ( 'NONE', *, *, #121, .F. ) ; +#412 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.561251128379126400E-016 ) ) ; +#413 = PLANE ( 'NONE', #1233 ) ; +#414 = EDGE_LOOP ( 'NONE', ( #1034, #592, #1243 ) ) ; +#415 = EDGE_CURVE ( 'NONE', #725, #571, #1957, .T. ) ; +#416 = VERTEX_POINT ( 'NONE', #560 ) ; +#417 = CYLINDRICAL_SURFACE ( 'NONE', #400, 4.999999999999997300 ) ; +#418 = VERTEX_POINT ( 'NONE', #100 ) ; +#419 = AXIS2_PLACEMENT_3D ( 'NONE', #545, #694, #381 ) ; +#420 = VECTOR ( 'NONE', #994, 1000.000000000000000 ) ; +#421 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#422 = PLANE ( 'NONE', #1639 ) ; +#423 = FACE_OUTER_BOUND ( 'NONE', #1041, .T. ) ; +#424 = ADVANCED_FACE ( 'NONE', ( #1916 ), #742, .T. ) ; +#425 = ORIENTED_EDGE ( 'NONE', *, *, #300, .F. ) ; +#426 = ORIENTED_EDGE ( 'NONE', *, *, #1946, .T. ) ; +#427 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 19.99999999999999600, 3.749999999999999600 ) ) ; +#428 = CARTESIAN_POINT ( 'NONE', ( -10.00000000000000000, -4.999999999999997300, 3.750000000000000000 ) ) ; +#429 = EDGE_CURVE ( 'NONE', #1797, #561, #390, .T. ) ; +#430 = VECTOR ( 'NONE', #810, 1000.000000000000000 ) ; +#431 = EDGE_CURVE ( 'NONE', #1566, #812, #702, .T. ) ; +#432 = ADVANCED_FACE ( 'NONE', ( #1507 ), #653, .T. ) ; +#433 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#434 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -2.312964634635743000E-016, -1.000000000000000000 ) ) ; +#435 = AXIS2_PLACEMENT_3D ( 'NONE', #273, #1344, #433 ) ; +#436 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995600, 26.96059418049937400, 18.15111623334564000 ) ) ; +#437 = EDGE_LOOP ( 'NONE', ( #1761, #548, #53, #741 ) ) ; +#438 = CIRCLE ( 'NONE', #115, 1.199999999999999700 ) ; +#439 = ORIENTED_EDGE ( 'NONE', *, *, #700, .F. ) ; +#440 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.561251128379126400E-016 ) ) ; +#441 = CARTESIAN_POINT ( 'NONE', ( -10.00000000000000000, 19.99999999999999600, 13.74999999999999800 ) ) ; +#442 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#443 = CIRCLE ( 'NONE', #1751, 10.00000000000000000 ) ; +#444 = VERTEX_POINT ( 'NONE', #1170 ) ; +#445 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#446 = EDGE_CURVE ( 'NONE', #459, #389, #1869, .T. ) ; +#447 = ADVANCED_FACE ( 'NONE', ( #243 ), #413, .F. ) ; +#448 = VECTOR ( 'NONE', #440, 1000.000000000000000 ) ; +#449 = CIRCLE ( 'NONE', #585, 4.999999999999997300 ) ; +#450 = VECTOR ( 'NONE', #629, 1000.000000000000000 ) ; +#451 = AXIS2_PLACEMENT_3D ( 'NONE', #1890, #976, #72 ) ; +#452 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000000, 29.18736225079865700, 15.89138657706866700 ) ) ; +#453 = ORIENTED_EDGE ( 'NONE', *, *, #1807, .T. ) ; +#454 = ORIENTED_EDGE ( 'NONE', *, *, #1541, .T. ) ; +#455 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.734723475976806800E-016 ) ) ; +#456 = ADVANCED_FACE ( 'NONE', ( #1464 ), #116, .F. ) ; +#457 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -15.00000000000000000, -3.750000000000001800 ) ) ; +#458 = DIRECTION ( 'NONE', ( 1.541976423090495600E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#459 = VERTEX_POINT ( 'NONE', #1022 ) ; +#460 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.08715574274765851300, -0.9961946980917455500 ) ) ; +#461 = AXIS2_PLACEMENT_3D ( 'NONE', #792, #1861, #949 ) ; +#462 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -4.999999999999999100, 1.249999999999999800 ) ) ; +#463 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#464 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #79, .NOT_KNOWN. ) ; +#465 = ADVANCED_FACE ( 'NONE', ( #497 ), #422, .T. ) ; +#466 = ORIENTED_EDGE ( 'NONE', *, *, #1451, .T. ) ; +#467 = VERTEX_POINT ( 'NONE', #1174 ) ; +#468 = LINE ( 'NONE', #1864, #869 ) ; +#469 = ORIENTED_EDGE ( 'NONE', *, *, #1666, .T. ) ; +#470 = CARTESIAN_POINT ( 'NONE', ( 28.39411254969542900, 24.99999999999999600, -8.700000000000002800 ) ) ; +#471 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 30.00000000000000000, -6.250000000000003600 ) ) ; +#472 = ORIENTED_EDGE ( 'NONE', *, *, #186, .T. ) ; +#473 = LINE ( 'NONE', #984, #1224 ) ; +#474 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -9.999999999999998200, -7.500000000000003600 ) ) ; +#475 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#476 = EDGE_CURVE ( 'NONE', #1868, #1052, #1631, .T. ) ; +#477 = VECTOR ( 'NONE', #1743, 1000.000000000000000 ) ; +#478 = ORIENTED_EDGE ( 'NONE', *, *, #632, .F. ) ; +#479 = AXIS2_PLACEMENT_3D ( 'NONE', #239, #1314, #397 ) ; +#480 = EDGE_LOOP ( 'NONE', ( #1031, #92, #664, #823, #832 ) ) ; +#481 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, 19.99999999999999600, -11.25000000000000400 ) ) ; +#482 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#483 = CYLINDRICAL_SURFACE ( 'NONE', #47, 5.000000000000004400 ) ; +#484 = LINE ( 'NONE', #922, #122 ) ; +#485 = EDGE_CURVE ( 'NONE', #1941, #1333, #1310, .T. ) ; +#486 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, -4.999999999999997300, 18.75000000000000000 ) ) ; +#487 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 19.99999999999999600, 8.750000000000000000 ) ) ; +#488 = AXIS2_PLACEMENT_3D ( 'NONE', #1822, #1374, #463 ) ; +#489 = ORIENTED_EDGE ( 'NONE', *, *, #415, .T. ) ; +#490 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 30.00000000000001400, 43.68416490252569400 ) ) ; +#491 = LINE ( 'NONE', #995, #844 ) ; +#492 = ORIENTED_EDGE ( 'NONE', *, *, #335, .F. ) ; +#493 = PERSON_AND_ORGANIZATION ( #696, #892 ) ; +#494 = ORIENTED_EDGE ( 'NONE', *, *, #1350, .T. ) ; +#495 = VERTEX_POINT ( 'NONE', #428 ) ; +#496 = LINE ( 'NONE', #125, #91 ) ; +#497 = FACE_OUTER_BOUND ( 'NONE', #721, .T. ) ; +#498 = CLOSED_SHELL ( 'NONE', ( #1643, #738, #593, #1067, #1660, #308, #765, #1040, #1048, #1340, #264, #1508, #1677, #1352, #1532, #1829, #146, #8, #432, #747, #890, #1668, #728, #614, #1184, #456, #1026, #1809, #1371, #582, #1815, #132, #1363, #162, #600, #1954, #1502, #881, #909, #1058, #447, #123, #1525, #143, #278, #465, #903, #1638, #301, #1799, #1216, #284, #424, #1207, #1949, #759, #1194, #923, #1968, #1490 ) ) ; +#499 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.775557561562891400E-016, 0.0000000000000000000 ) ) ; +#500 = CIRCLE ( 'NONE', #410, 1.200000000000000600 ) ; +#501 = ORIENTED_EDGE ( 'NONE', *, *, #978, .F. ) ; +#502 = EDGE_LOOP ( 'NONE', ( #1423, #203, #1649, #453 ) ) ; +#503 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 7.500000000000003600, 1.250000000000001100 ) ) ; +#504 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#505 = EDGE_CURVE ( 'NONE', #961, #1063, #997, .T. ) ; +#506 = AXIS2_PLACEMENT_3D ( 'NONE', #511, #1574, #661 ) ; +#507 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 20.00000000000000400, 1.250000000000003800 ) ) ; +#508 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#509 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 30.00000000000000000, -6.250000000000003600 ) ) ; +#510 = ORIENTED_EDGE ( 'NONE', *, *, #1237, .F. ) ; +#511 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999993800, -9.999999999999998200, -7.500000000000003600 ) ) ; +#512 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#513 = EDGE_CURVE ( 'NONE', #571, #459, #443, .T. ) ; +#514 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#515 = AXIS2_PLACEMENT_3D ( 'NONE', #1670, #758, #1826 ) ; +#516 = VERTEX_POINT ( 'NONE', #1790 ) ; +#517 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#518 = ORIENTED_EDGE ( 'NONE', *, *, #1594, .T. ) ; +#519 = FACE_OUTER_BOUND ( 'NONE', #942, .T. ) ; +#520 = EDGE_LOOP ( 'NONE', ( #1370, #597, #752, #1381, #1870, #1593, #1839, #131, #1256 ) ) ; +#521 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#522 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.541976423090495600E-016, -9.986303415341224300E-032 ) ) ; +#523 = LINE ( 'NONE', #979, #1277 ) ; +#524 = LINE ( 'NONE', #944, #969 ) ; +#525 = FACE_OUTER_BOUND ( 'NONE', #1713, .T. ) ; +#526 = ORIENTED_EDGE ( 'NONE', *, *, #476, .F. ) ; +#527 = ORIENTED_EDGE ( 'NONE', *, *, #283, .T. ) ; +#528 = EDGE_CURVE ( 'NONE', #1078, #1741, #1422, .T. ) ; +#529 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#530 = PLANE ( 'NONE', #451 ) ; +#531 = ORIENTED_EDGE ( 'NONE', *, *, #1129, .F. ) ; +#532 = AXIS2_PLACEMENT_3D ( 'NONE', #1162, #245, #1319 ) ; +#533 = PLANE ( 'NONE', #1321 ) ; +#534 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#535 = CYLINDRICAL_SURFACE ( 'NONE', #1618, 5.000000000000004400 ) ; +#536 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.349229370204183400E-016, -9.540486298584920700E-032 ) ) ; +#537 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000200, -4.999999999999998200, 6.249999999999999100 ) ) ; +#538 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995100, 29.50511195022797400, 15.09204941200859000 ) ) ; +#539 = EDGE_CURVE ( 'NONE', #946, #1343, #1378, .T. ) ; +#540 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#541 = EDGE_CURVE ( 'NONE', #1413, #855, #569, .T. ) ; +#542 = ORIENTED_EDGE ( 'NONE', *, *, #1465, .F. ) ; +#543 = LINE ( 'NONE', #985, #1295 ) ; +#544 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 30.00000000000001400, 43.68416490252569400 ) ) ; +#545 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.99999999999999600, -6.250000000000003600 ) ) ; +#546 = ORIENTED_EDGE ( 'NONE', *, *, #839, .T. ) ; +#547 = AXIS2_PLACEMENT_3D ( 'NONE', #1189, #279, #1353 ) ; +#548 = ORIENTED_EDGE ( 'NONE', *, *, #729, .T. ) ; +#549 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#550 = FACE_OUTER_BOUND ( 'NONE', #713, .T. ) ; +#551 = FACE_OUTER_BOUND ( 'NONE', #718, .T. ) ; +#552 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#553 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 24.99999999999999600, -6.300000000000002500 ) ) ; +#554 = ORIENTED_EDGE ( 'NONE', *, *, #1393, .F. ) ; +#555 = EDGE_LOOP ( 'NONE', ( #343, #1476, #375 ) ) ; +#556 = EDGE_CURVE ( 'NONE', #1948, #208, #686, .T. ) ; +#557 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995600, -7.499999999999992900, 13.75000000000000200 ) ) ; +#558 = AXIS2_PLACEMENT_3D ( 'NONE', #1145, #232, #1298 ) ; +#559 = ORIENTED_EDGE ( 'NONE', *, *, #328, .F. ) ; +#560 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 24.99999999999999600, -8.700000000000002800 ) ) ; +#561 = VERTEX_POINT ( 'NONE', #1354 ) ; +#562 = AXIS2_PLACEMENT_3D ( 'NONE', #1241, #1858, #35 ) ; +#563 = VERTEX_POINT ( 'NONE', #1504 ) ; +#564 = PLANE ( 'NONE', #1494 ) ; +#565 = LINE ( 'NONE', #776, #1729 ) ; +#566 = APPROVAL ( #1297, 'UNSPECIFIED' ) ; +#567 = ORIENTED_EDGE ( 'NONE', *, *, #1934, .F. ) ; +#568 = LINE ( 'NONE', #1268, #967 ) ; +#569 = CIRCLE ( 'NONE', #1850, 10.00000000000000200 ) ; +#570 = CIRCLE ( 'NONE', #1096, 1.199999999999999700 ) ; +#571 = VERTEX_POINT ( 'NONE', #441 ) ; +#572 = CARTESIAN_POINT ( 'NONE', ( 27.49999999999998900, -51.40054944640257200, -1.908195823574488100E-014 ) ) ; +#573 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999600, 13.75000000000000200 ) ) ; +#574 = EDGE_CURVE ( 'NONE', #1090, #1413, #173, .T. ) ; +#575 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -4.999999999999999100, 1.249999999999999800 ) ) ; +#576 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -7.500000000000000000, -3.750000000000003600 ) ) ; +#577 = AXIS2_PLACEMENT_3D ( 'NONE', #683, #1750, #834 ) ; +#578 = CIRCLE ( 'NONE', #1518, 7.500000000000000900 ) ; +#579 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#580 = ORIENTED_EDGE ( 'NONE', *, *, #639, .T. ) ; +#581 = EDGE_CURVE ( 'NONE', #563, #459, #1252, .T. ) ; +#582 = ADVANCED_FACE ( 'NONE', ( #751, #271 ), #145, .F. ) ; +#583 = ORIENTED_EDGE ( 'NONE', *, *, #218, .T. ) ; +#584 = EDGE_LOOP ( 'NONE', ( #1140, #1939, #754, #795 ) ) ; +#585 = AXIS2_PLACEMENT_3D ( 'NONE', #1533, #622, #1684 ) ; +#586 = FACE_OUTER_BOUND ( 'NONE', #248, .T. ) ; +#587 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -2.312964634635743400E-016, -1.000000000000000000 ) ) ; +#588 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#589 = CIRCLE ( 'NONE', #104, 1.200000000000000600 ) ; +#590 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995600, 26.01635531888771200, 18.52587248860494300 ) ) ; +#591 = VERTEX_POINT ( 'NONE', #594 ) ; +#592 = ORIENTED_EDGE ( 'NONE', *, *, #1076, .T. ) ; +#593 = ADVANCED_FACE ( 'NONE', ( #1924 ), #1201, .F. ) ; +#594 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999600, -6.250000000000001800 ) ) ; +#595 = DIRECTION ( 'NONE', ( -1.349229370204183400E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#596 = EDGE_CURVE ( 'NONE', #893, #1873, #1111, .T. ) ; +#597 = ORIENTED_EDGE ( 'NONE', *, *, #941, .T. ) ; +#598 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000400, 29.50205015986222900, 15.10310576859420600 ) ) ; +#599 = AXIS2_PLACEMENT_3D ( 'NONE', #354, #1425, #517 ) ; +#600 = ADVANCED_FACE ( 'NONE', ( #1516 ), #304, .F. ) ; +#601 = ORIENTED_EDGE ( 'NONE', *, *, #556, .F. ) ; +#602 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#603 = CARTESIAN_POINT ( 'NONE', ( 28.39411254969542900, -9.999999999999998200, -7.500000000000003600 ) ) ; +#604 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#605 = ORIENTED_EDGE ( 'NONE', *, *, #1296, .T. ) ; +#606 = PLANE ( 'NONE', #515 ) ; +#607 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#608 = EDGE_CURVE ( 'NONE', #349, #1855, #1656, .T. ) ; +#609 = VECTOR ( 'NONE', #1234, 1000.000000000000000 ) ; +#610 = LINE ( 'NONE', #471, #1375 ) ; +#611 = ORIENTED_EDGE ( 'NONE', *, *, #1121, .F. ) ; +#612 = CIRCLE ( 'NONE', #1937, 1.200000000000000600 ) ; +#613 = AXIS2_PLACEMENT_3D ( 'NONE', #764, #1832, #921 ) ; +#614 = ADVANCED_FACE ( 'NONE', ( #1965, #1565, #1159 ), #1831, .T. ) ; +#615 = CARTESIAN_POINT ( 'NONE', ( -10.00000000000000000, 0.0000000000000000000, 3.750000000000000000 ) ) ; +#616 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 30.00000000000000000, 3.750000000000004400 ) ) ; +#617 = EDGE_LOOP ( 'NONE', ( #1062, #1463, #583, #1301, #601 ) ) ; +#618 = EDGE_LOOP ( 'NONE', ( #1404, #1707 ) ) ; +#619 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 25.00000000000000000, -11.25000000000000400 ) ) ; +#620 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.561251128379126400E-016, -1.000000000000000000 ) ) ; +#621 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -9.999999999999994700, 18.75000000000000000 ) ) ; +#622 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.349229370204183400E-016, 9.540486298584920700E-032 ) ) ; +#623 = EDGE_CURVE ( 'NONE', #631, #1947, #449, .T. ) ; +#624 = LINE ( 'NONE', #299, #1023 ) ; +#625 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#626 = AXIS2_PLACEMENT_3D ( 'NONE', #861, #1930, #1011 ) ; +#627 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 19.99999999999999600, -11.25000000000000400 ) ) ; +#628 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999300, -14.99999999999999600, -3.750000000000003600 ) ) ; +#629 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#630 = VERTEX_POINT ( 'NONE', #1384 ) ; +#631 = VERTEX_POINT ( 'NONE', #310 ) ; +#632 = EDGE_CURVE ( 'NONE', #1123, #1191, #802, .T. ) ; +#633 = FACE_BOUND ( 'NONE', #314, .T. ) ; +#634 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 7.500000000000002700, 6.250000000000001800 ) ) ; +#635 = ORIENTED_EDGE ( 'NONE', *, *, #24, .T. ) ; +#636 = TOROIDAL_SURFACE ( 'NONE', #1288, 12.50000000000000000, 5.000000000000000000 ) ; +#637 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000000, -51.40054944640257200, 13.75000000000000200 ) ) ; +#638 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#639 = EDGE_CURVE ( 'NONE', #106, #110, #1613, .T. ) ; +#640 = FACE_BOUND ( 'NONE', #618, .T. ) ; +#641 = AXIS2_PLACEMENT_3D ( 'NONE', #1049, #739, #285 ) ; +#642 = EDGE_LOOP ( 'NONE', ( #1513, #36, #182 ) ) ; +#643 = ORIENTED_EDGE ( 'NONE', *, *, #168, .F. ) ; +#644 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#645 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#646 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 5.000000000000002700, 1.250000000000001300 ) ) ; +#647 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.999999999999999100, 1.249999999999999800 ) ) ; +#648 = EDGE_CURVE ( 'NONE', #870, #1396, #851, .T. ) ; +#649 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.561251128379126400E-016 ) ) ; +#650 = AXIS2_PLACEMENT_3D ( 'NONE', #674, #1591, #680 ) ; +#651 = ORIENTED_EDGE ( 'NONE', *, *, #1362, .F. ) ; +#652 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 20.00000000000000400, 1.250000000000003800 ) ) ; +#653 = CYLINDRICAL_SURFACE ( 'NONE', #1025, 5.000000000000000900 ) ; +#654 = ORIENTED_EDGE ( 'NONE', *, *, #1874, .F. ) ; +#655 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#656 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#657 = LOCAL_TIME ( 17, 41, 56.00000000000000000, #1055 ) ; +#658 = ORIENTED_EDGE ( 'NONE', *, *, #1435, .F. ) ; +#659 = CONICAL_SURFACE ( 'NONE', #1246, 2.500000000000000400, 0.08726646259971666800 ) ; +#660 = VERTEX_POINT ( 'NONE', #628 ) ; +#661 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#662 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, -4.999999999999999100, 1.249999999999999100 ) ) ; +#663 = LINE ( 'NONE', #54, #1825 ) ; +#664 = ORIENTED_EDGE ( 'NONE', *, *, #237, .T. ) ; +#665 = ORIENTED_EDGE ( 'NONE', *, *, #771, .T. ) ; +#666 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999993800, -9.999999999999998200, -7.500000000000003600 ) ) ; +#667 = AXIS2_PLACEMENT_3D ( 'NONE', #1572, #656, #1721 ) ; +#668 = CC_DESIGN_APPROVAL ( #566, ( #464 ) ) ; +#669 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999993800, -9.999999999999998200, -6.300000000000002500 ) ) ; +#670 = CARTESIAN_POINT ( 'NONE', ( -10.00000000000000000, -4.999999999999994700, 13.74999999999999800 ) ) ; +#671 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 15.00000000000000400, 6.250000000000002700 ) ) ; +#672 = FACE_OUTER_BOUND ( 'NONE', #42, .T. ) ; +#673 = PLANE ( 'NONE', #1110 ) ; +#674 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 30.00000000000000000, -3.749999999999995100 ) ) ; +#675 = EDGE_CURVE ( 'NONE', #630, #349, #49, .T. ) ; +#676 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.99999999999999600, -11.25000000000000500 ) ) ; +#677 = ORIENTED_EDGE ( 'NONE', *, *, #720, .T. ) ; +#678 = CIRCLE ( 'NONE', #1786, 5.000000000000000000 ) ; +#679 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.561251128379126400E-016 ) ) ; +#680 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#681 = EDGE_LOOP ( 'NONE', ( #773, #89 ) ) ; +#682 = ORIENTED_EDGE ( 'NONE', *, *, #311, .T. ) ; +#683 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 30.00000000000000000, -3.749999999999995100 ) ) ; +#684 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#685 = CIRCLE ( 'NONE', #1079, 10.00000000000000000 ) ; +#686 = LINE ( 'NONE', #734, #1225 ) ; +#687 = CIRCLE ( 'NONE', #1470, 5.000000000000000900 ) ; +#688 = ORIENTED_EDGE ( 'NONE', *, *, #689, .T. ) ; +#689 = EDGE_CURVE ( 'NONE', #181, #1002, #610, .T. ) ; +#690 = MECHANICAL_CONTEXT ( 'NONE', #540, 'mechanical' ) ; +#691 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#692 = ORIENTED_EDGE ( 'NONE', *, *, #1258, .F. ) ; +#693 = ORIENTED_EDGE ( 'NONE', *, *, #1674, .F. ) ; +#694 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#695 = AXIS2_PLACEMENT_3D ( 'NONE', #1673, #10, #1069 ) ; +#696 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#697 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#698 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -15.00000000000000000, -6.250000000000000900 ) ) ; +#699 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -9.999999999999998200, -7.500000000000003600 ) ) ; +#700 = EDGE_CURVE ( 'NONE', #1088, #14, #202, .T. ) ; +#701 = ORIENTED_EDGE ( 'NONE', *, *, #429, .T. ) ; +#702 = LINE ( 'NONE', #409, #289 ) ; +#703 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999800, 7.500000000000003600, 8.750000000000000000 ) ) ; +#704 = ORIENTED_EDGE ( 'NONE', *, *, #784, .F. ) ; +#705 = AXIS2_PLACEMENT_3D ( 'NONE', #211, #1275, #359 ) ; +#706 = APPROVAL_DATE_TIME ( #1107, #566 ) ; +#707 = EDGE_LOOP ( 'NONE', ( #376, #189, #1795, #345, #654, #1029, #894, #405, #701 ) ) ; +#708 = LINE ( 'NONE', #462, #1875 ) ; +#709 = ORIENTED_EDGE ( 'NONE', *, *, #194, .F. ) ; +#710 = LINE ( 'NONE', #1715, #1519 ) ; +#711 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#712 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 20.00000000000000400, -3.749999999999996400 ) ) ; +#713 = EDGE_LOOP ( 'NONE', ( #234, #887, #1563, #714, #1592, #821, #1211, #1255, #1245, #1778 ) ) ; +#714 = ORIENTED_EDGE ( 'NONE', *, *, #1807, .F. ) ; +#715 = EDGE_CURVE ( 'NONE', #1828, #1920, #570, .T. ) ; +#716 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -1.373322751814975100E-016, 1.250000000000000700 ) ) ; +#717 = AXIS2_PLACEMENT_3D ( 'NONE', #6, #152, #912 ) ; +#718 = EDGE_LOOP ( 'NONE', ( #1274, #307, #362, #988 ) ) ; +#719 = DIRECTION ( 'NONE', ( 1.000000000000000000, 3.469446951953614200E-015, 0.0000000000000000000 ) ) ; +#720 = EDGE_CURVE ( 'NONE', #1071, #337, #826, .T. ) ; +#721 = EDGE_LOOP ( 'NONE', ( #276, #1271, #1153, #1824, #1547, #761, #1108, #219 ) ) ; +#722 = ORIENTED_EDGE ( 'NONE', *, *, #65, .T. ) ; +#723 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.312964634635743400E-016, 1.000000000000000000 ) ) ; +#724 = VECTOR ( 'NONE', #811, 1000.000000000000000 ) ; +#725 = VERTEX_POINT ( 'NONE', #1401 ) ; +#726 = VECTOR ( 'NONE', #1457, 1000.000000000000000 ) ; +#727 = LINE ( 'NONE', #99, #1495 ) ; +#728 = ADVANCED_FACE ( 'NONE', ( #1782, #1342, #1735 ), #1853, .F. ) ; +#729 = EDGE_CURVE ( 'NONE', #1141, #1920, #524, .T. ) ; +#730 = EDGE_LOOP ( 'NONE', ( #862, #1624 ) ) ; +#731 = ORIENTED_EDGE ( 'NONE', *, *, #1350, .F. ) ; +#732 = EDGE_CURVE ( 'NONE', #1394, #1328, #1332, .T. ) ; +#733 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#734 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 30.00000000000002100, -3.749999999999996400 ) ) ; +#735 = AXIS2_PLACEMENT_3D ( 'NONE', #749, #1812, #905 ) ; +#736 = LINE ( 'NONE', #346, #430 ) ; +#737 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995600, 25.01155517454368000, 18.72363103140805100 ) ) ; +#738 = ADVANCED_FACE ( 'NONE', ( #875 ), #40, .F. ) ; +#739 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.561251128379126400E-016, -1.000000000000000000 ) ) ; +#740 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, -51.40054944640257200, 13.75000000000000200 ) ) ; +#741 = ORIENTED_EDGE ( 'NONE', *, *, #1501, .F. ) ; +#742 = TOROIDAL_SURFACE ( 'NONE', #830, 5.000000000000000000, 5.000000000000000000 ) ; +#743 = EDGE_CURVE ( 'NONE', #1971, #1719, #1632, .T. ) ; +#744 = EDGE_LOOP ( 'NONE', ( #877, #262, #856, #1506, #199 ) ) ; +#745 = APPROVAL_PERSON_ORGANIZATION ( #1154, #566, #384 ) ; +#746 = ORIENTED_EDGE ( 'NONE', *, *, #1143, .F. ) ; +#747 = ADVANCED_FACE ( 'NONE', ( #113 ), #1714, .F. ) ; +#748 = CIRCLE ( 'NONE', #1046, 10.00000000000000200 ) ; +#749 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -9.999999999999996400, -6.250000000000006200 ) ) ; +#750 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000000, 29.68245836551853500, 14.09375634507992300 ) ) ; +#751 = FACE_BOUND ( 'NONE', #1536, .T. ) ; +#752 = ORIENTED_EDGE ( 'NONE', *, *, #322, .T. ) ; +#753 = TOROIDAL_SURFACE ( 'NONE', #1430, 5.000000000000000000, 5.000000000000000000 ) ; +#754 = ORIENTED_EDGE ( 'NONE', *, *, #137, .F. ) ; +#755 = ORIENTED_EDGE ( 'NONE', *, *, #743, .F. ) ; +#756 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -2.312964634635743400E-016 ) ) ; +#757 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#758 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.734723475976807100E-016 ) ) ; +#759 = ADVANCED_FACE ( 'NONE', ( #1647 ), #911, .T. ) ; +#760 = AXIS2_PLACEMENT_3D ( 'NONE', #1709, #1100, #185 ) ; +#761 = ORIENTED_EDGE ( 'NONE', *, *, #1833, .F. ) ; +#762 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#763 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #292, #1454, ( #464 ) ) ; +#764 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 7.500000000000003600, 1.250000000000001100 ) ) ; +#765 = ADVANCED_FACE ( 'NONE', ( #924 ), #483, .T. ) ; +#766 = EDGE_LOOP ( 'NONE', ( #20, #207, #526, #501, #172, #1356, #955, #1728, #731, #1754, #138 ) ) ; +#767 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.999999999999999100, -3.750000000000003600 ) ) ; +#768 = EDGE_LOOP ( 'NONE', ( #250, #224, #1725, #1341 ) ) ; +#769 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999300, -14.99999999999999600, -3.750000000000003600 ) ) ; +#770 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 20.00000000000000400, 6.250000000000002700 ) ) ; +#771 = EDGE_CURVE ( 'NONE', #467, #516, #86, .T. ) ; +#772 = LINE ( 'NONE', #350, #724 ) ; +#773 = ORIENTED_EDGE ( 'NONE', *, *, #1156, .T. ) ; +#774 = CIRCLE ( 'NONE', #479, 7.500000000000000900 ) ; +#775 = AXIS2_PLACEMENT_3D ( 'NONE', #1291, #1142, #380 ) ; +#776 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -15.00000000000000000, -3.750000000000001800 ) ) ; +#777 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#778 = FACE_OUTER_BOUND ( 'NONE', #642, .T. ) ; +#779 = ORIENTED_EDGE ( 'NONE', *, *, #513, .T. ) ; +#780 = ORIENTED_EDGE ( 'NONE', *, *, #1146, .F. ) ; +#781 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.561251128379126400E-016 ) ) ; +#782 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 30.00000000000000400, -6.249999999999998200 ) ) ; +#783 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#784 = EDGE_CURVE ( 'NONE', #1920, #1828, #1770, .T. ) ; +#785 = FACE_OUTER_BOUND ( 'NONE', #901, .T. ) ; +#786 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.541976423090495600E-016, 9.986303415341224300E-032 ) ) ; +#787 = DIRECTION ( 'NONE', ( 8.673617379884041600E-017, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#788 = AXIS2_PLACEMENT_3D ( 'NONE', #1073, #163, #1227 ) ; +#789 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.541976423090495600E-016, 9.986303415341224300E-032 ) ) ; +#790 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 19.99999999999999600, -6.250000000000002700 ) ) ; +#791 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999600, 13.74999999999999800 ) ) ; +#792 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 7.500000000000002700, 6.250000000000001800 ) ) ; +#793 = EDGE_LOOP ( 'NONE', ( #1617, #651, #1675, #907 ) ) ; +#794 = VECTOR ( 'NONE', #1315, 1000.000000000000000 ) ; +#795 = ORIENTED_EDGE ( 'NONE', *, *, #1051, .F. ) ; +#796 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#797 = ORIENTED_EDGE ( 'NONE', *, *, #836, .F. ) ; +#798 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -14.99999999999999800, 3.749999999999997800 ) ) ; +#799 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 30.00000000000000000, -3.749999999999995100 ) ) ; +#800 = ORIENTED_EDGE ( 'NONE', *, *, #1792, .T. ) ; +#801 = FACE_OUTER_BOUND ( 'NONE', #1885, .T. ) ; +#802 = CIRCLE ( 'NONE', #788, 5.000000000000000900 ) ; +#803 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -14.99999999999999800, 13.74999999999999800 ) ) ; +#804 = EDGE_CURVE ( 'NONE', #855, #176, #118, .T. ) ; +#805 = VECTOR ( 'NONE', #1708, 1000.000000000000000 ) ; +#806 = ORIENTED_EDGE ( 'NONE', *, *, #824, .F. ) ; +#807 = VERTEX_POINT ( 'NONE', #1724 ) ; +#808 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#809 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#810 = DIRECTION ( 'NONE', ( -1.541976423090495600E-016, -1.000000000000000000, -1.445602896647339700E-016 ) ) ; +#811 = DIRECTION ( 'NONE', ( 6.419766481290786900E-032, -2.312964634635743000E-016, -1.000000000000000000 ) ) ; +#812 = VERTEX_POINT ( 'NONE', #662 ) ; +#813 = EDGE_CURVE ( 'NONE', #893, #1052, #837, .T. ) ; +#814 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#815 = AXIS2_PLACEMENT_3D ( 'NONE', #22, #1074, #165 ) ; +#816 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.0000000000000000000, 18.75000000000000000 ) ) ; +#817 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 2.312964634635743400E-016, 1.000000000000000000 ) ) ; +#818 = ORIENTED_EDGE ( 'NONE', *, *, #1622, .T. ) ; +#819 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.999999999999998200, -6.300000000000002500 ) ) ; +#820 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 24.99999999999999600, -6.250000000000003600 ) ) ; +#821 = ORIENTED_EDGE ( 'NONE', *, *, #1569, .F. ) ; +#822 = CIRCLE ( 'NONE', #187, 1.843835023555569200 ) ; +#823 = ORIENTED_EDGE ( 'NONE', *, *, #1763, .F. ) ; +#824 = EDGE_CURVE ( 'NONE', #288, #302, #1013, .T. ) ; +#825 = LINE ( 'NONE', #1601, #420 ) ; +#826 = LINE ( 'NONE', #938, #1380 ) ; +#827 = LINE ( 'NONE', #379, #114 ) ; +#828 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.561251128379126400E-016, -1.000000000000000000 ) ) ; +#829 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, -51.40054944640257200, 0.0000000000000000000 ) ) ; +#830 = AXIS2_PLACEMENT_3D ( 'NONE', #103, #1167, #253 ) ; +#831 = ORIENTED_EDGE ( 'NONE', *, *, #541, .T. ) ; +#832 = ORIENTED_EDGE ( 'NONE', *, *, #1484, .F. ) ; +#833 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#834 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.445602896647339700E-016 ) ) ; +#835 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, -7.500000000000000000, 8.750000000000000000 ) ) ; +#836 = EDGE_CURVE ( 'NONE', #1444, #1112, #859, .T. ) ; +#837 = CIRCLE ( 'NONE', #1304, 12.50000000000000000 ) ; +#838 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#839 = EDGE_CURVE ( 'NONE', #495, #807, #1053, .T. ) ; +#840 = DIRECTION ( 'NONE', ( -1.349229370204183400E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#841 = DIRECTION ( 'NONE', ( -9.986303415341224300E-032, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#842 = AXIS2_PLACEMENT_3D ( 'NONE', #1810, #1654, #898 ) ; +#843 = VERTEX_POINT ( 'NONE', #1426 ) ; +#844 = VECTOR ( 'NONE', #841, 1000.000000000000000 ) ; +#845 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#846 = ORIENTED_EDGE ( 'NONE', *, *, #1556, .F. ) ; +#847 = LOCAL_TIME ( 17, 41, 56.00000000000000000, #1247 ) ; +#848 = ORIENTED_EDGE ( 'NONE', *, *, #648, .T. ) ; +#849 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#850 = CIRCLE ( 'NONE', #735, 4.999999999999997300 ) ; +#851 = CIRCLE ( 'NONE', #889, 10.00000000000000000 ) ; +#852 = LINE ( 'NONE', #1845, #1614 ) ; +#853 = EDGE_CURVE ( 'NONE', #1444, #467, #1685, .T. ) ; +#854 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.561251128379126400E-016 ) ) ; +#855 = VERTEX_POINT ( 'NONE', #1125 ) ; +#856 = ORIENTED_EDGE ( 'NONE', *, *, #930, .T. ) ; +#857 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#858 = AXIS2_PLACEMENT_3D ( 'NONE', #1898, #534, #833 ) ; +#859 = LINE ( 'NONE', #355, #963 ) ; +#860 = DIRECTION ( 'NONE', ( -1.541976423090495600E-016, -1.000000000000000000, -1.445602896647339700E-016 ) ) ; +#861 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 19.99999999999999600, 13.74999999999999800 ) ) ; +#862 = ORIENTED_EDGE ( 'NONE', *, *, #1296, .F. ) ; +#863 = AXIS2_PLACEMENT_3D ( 'NONE', #666, #1727, #814 ) ; +#864 = CARTESIAN_POINT ( 'NONE', ( -10.00000000000000000, 0.0000000000000000000, 18.75000000000000000 ) ) ; +#865 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#866 = ORIENTED_EDGE ( 'NONE', *, *, #804, .F. ) ; +#867 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1871, #549, ( #464 ) ) ; +#868 = ORIENTED_EDGE ( 'NONE', *, *, #186, .F. ) ; +#869 = VECTOR ( 'NONE', #950, 1000.000000000000000 ) ; +#870 = VERTEX_POINT ( 'NONE', #1884 ) ; +#871 = EDGE_LOOP ( 'NONE', ( #170, #848, #518, #939 ) ) ; +#872 = FACE_OUTER_BOUND ( 'NONE', #1056, .T. ) ; +#873 = DIRECTION ( 'NONE', ( -6.938893903907233300E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#874 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#875 = FACE_OUTER_BOUND ( 'NONE', #326, .T. ) ; +#876 = FACE_OUTER_BOUND ( 'NONE', #1560, .T. ) ; +#877 = ORIENTED_EDGE ( 'NONE', *, *, #1388, .F. ) ; +#878 = VERTEX_POINT ( 'NONE', #1731 ) ; +#879 = EDGE_CURVE ( 'NONE', #1101, #1325, #1279, .T. ) ; +#880 = AXIS2_PLACEMENT_3D ( 'NONE', #544, #536, #840 ) ; +#881 = ADVANCED_FACE ( 'NONE', ( #525 ), #530, .F. ) ; +#882 = VECTOR ( 'NONE', #179, 1000.000000000000000 ) ; +#883 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -4.999999999999994700, 18.75000000000000000 ) ) ; +#884 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#885 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996000, 28.95160456338150100, 16.33355859679052800 ) ) ; +#886 = EDGE_CURVE ( 'NONE', #725, #1054, #1633, .T. ) ; +#887 = ORIENTED_EDGE ( 'NONE', *, *, #76, .T. ) ; +#888 = FACE_OUTER_BOUND ( 'NONE', #1181, .T. ) ; +#889 = AXIS2_PLACEMENT_3D ( 'NONE', #1689, #777, #1842 ) ; +#890 = ADVANCED_FACE ( 'NONE', ( #876 ), #1285, .F. ) ; +#891 = ORIENTED_EDGE ( 'NONE', *, *, #804, .T. ) ; +#892 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#893 = VERTEX_POINT ( 'NONE', #1131 ) ; +#894 = ORIENTED_EDGE ( 'NONE', *, *, #1895, .T. ) ; +#895 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995100, 24.33012701892219100, 18.75000000000000000 ) ) ; +#896 = LINE ( 'NONE', #1498, #943 ) ; +#897 = CYLINDRICAL_SURFACE ( 'NONE', #717, 1.200000000000000600 ) ; +#898 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#899 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000400, 26.97349049012939300, 18.18099583550125300 ) ) ; +#900 = ORIENTED_EDGE ( 'NONE', *, *, #210, .F. ) ; +#901 = EDGE_LOOP ( 'NONE', ( #1571, #831, #64, #1667 ) ) ; +#902 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#903 = ADVANCED_FACE ( 'NONE', ( #423 ), #1589, .T. ) ; +#904 = EDGE_CURVE ( 'NONE', #1009, #1608, #827, .T. ) ; +#905 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#906 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#907 = ORIENTED_EDGE ( 'NONE', *, *, #1121, .T. ) ; +#908 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#909 = ADVANCED_FACE ( 'NONE', ( #23, #1179 ), #1749, .T. ) ; +#910 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -14.99999999999999800, 3.749999999999999100 ) ) ; +#911 = TOROIDAL_SURFACE ( 'NONE', #1808, 5.000000000000000000, 5.000000000000000000 ) ; +#912 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#913 = EDGE_CURVE ( 'NONE', #416, #1009, #372, .T. ) ; +#914 = ORIENTED_EDGE ( 'NONE', *, *, #1024, .F. ) ; +#915 = ORIENTED_EDGE ( 'NONE', *, *, #1541, .F. ) ; +#916 = AXIS2_PLACEMENT_3D ( 'NONE', #1085, #169, #1236 ) ; +#917 = VECTOR ( 'NONE', #1695, 1000.000000000000000 ) ; +#918 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#919 = ORIENTED_EDGE ( 'NONE', *, *, #700, .T. ) ; +#920 = VECTOR ( 'NONE', #74, 1000.000000000000000 ) ; +#921 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.561251128379126400E-016 ) ) ; +#922 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 30.00000000000000000, 13.74999999999999800 ) ) ; +#923 = ADVANCED_FACE ( 'NONE', ( #778 ), #81, .T. ) ; +#924 = FACE_OUTER_BOUND ( 'NONE', #1263, .T. ) ; +#925 = VECTOR ( 'NONE', #817, 1000.000000000000000 ) ; +#926 = ORIENTED_EDGE ( 'NONE', *, *, #1286, .T. ) ; +#927 = ORIENTED_EDGE ( 'NONE', *, *, #446, .T. ) ; +#928 = EDGE_LOOP ( 'NONE', ( #1736, #1223, #426, #1891 ) ) ; +#929 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000000, -6.249999999999998200 ) ) ; +#930 = EDGE_CURVE ( 'NONE', #1077, #110, #1228, .T. ) ; +#931 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#932 = AXIS2_PLACEMENT_3D ( 'NONE', #573, #1626, #719 ) ; +#933 = LINE ( 'NONE', #1392, #1339 ) ; +#934 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 30.00000000000000000, -3.749999999999995100 ) ) ; +#935 = EDGE_CURVE ( 'NONE', #1063, #1741, #1137, .T. ) ; +#936 = ORIENTED_EDGE ( 'NONE', *, *, #1338, .F. ) ; +#937 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.312964634635743400E-016, 1.000000000000000000 ) ) ; +#938 = CARTESIAN_POINT ( 'NONE', ( 28.39411254969542900, -9.999999999999998200, -8.700000000000002800 ) ) ; +#939 = ORIENTED_EDGE ( 'NONE', *, *, #1465, .T. ) ; +#940 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#941 = EDGE_CURVE ( 'NONE', #1312, #1522, #1544, .T. ) ; +#942 = EDGE_LOOP ( 'NONE', ( #542, #693, #320, #105 ) ) ; +#943 = VECTOR ( 'NONE', #1644, 1000.000000000000000 ) ; +#944 = CARTESIAN_POINT ( 'NONE', ( 28.39411254969542900, 24.99999999999999600, -8.700000000000002800 ) ) ; +#945 = VECTOR ( 'NONE', #460, 1000.000000000000000 ) ; +#946 = VERTEX_POINT ( 'NONE', #1760 ) ; +#947 = EDGE_LOOP ( 'NONE', ( #195, #1452, #1876, #246, #1918, #1320, #936, #611, #87, #52 ) ) ; +#948 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#949 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#950 = DIRECTION ( 'NONE', ( -8.673617379884041600E-017, -2.312964634635743400E-016, -1.000000000000000000 ) ) ; +#951 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.445602896647339700E-016, 1.000000000000000000 ) ) ; +#952 = EDGE_CURVE ( 'NONE', #1873, #98, #1945, .T. ) ; +#953 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#954 = AXIS2_PLACEMENT_3D ( 'NONE', #1139, #1599, #691 ) ; +#955 = ORIENTED_EDGE ( 'NONE', *, *, #528, .F. ) ; +#956 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -4.999999999999993800, 18.75000000000000000 ) ) ; +#957 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -4.999999999999998200, -6.250000000000001800 ) ) ; +#958 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#959 = ORIENTED_EDGE ( 'NONE', *, *, #1705, .F. ) ; +#960 = APPROVAL_DATE_TIME ( #1369, #1273 ) ; +#961 = VERTEX_POINT ( 'NONE', #1003 ) ; +#962 = VECTOR ( 'NONE', #1840, 1000.000000000000000 ) ; +#963 = VECTOR ( 'NONE', #60, 1000.000000000000000 ) ; +#964 = ORIENTED_EDGE ( 'NONE', *, *, #1484, .T. ) ; +#965 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -4.999999999999998200, -6.249999999999998200 ) ) ; +#966 = AXIS2_PLACEMENT_3D ( 'NONE', #1406, #336, #504 ) ; +#967 = VECTOR ( 'NONE', #1434, 1000.000000000000000 ) ; +#968 = VECTOR ( 'NONE', #434, 1000.000000000000000 ) ; +#969 = VECTOR ( 'NONE', #39, 1000.000000000000000 ) ; +#970 = SECURITY_CLASSIFICATION ( '', '', #1603 ) ; +#971 = ORIENTED_EDGE ( 'NONE', *, *, #65, .F. ) ; +#972 = EDGE_LOOP ( 'NONE', ( #1661, #891, #1419, #1324 ) ) ; +#973 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999993800, -14.99999999999999600, -3.750000000000003600 ) ) ; +#974 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#975 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#976 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#977 = CIRCLE ( 'NONE', #1929, 5.000000000000000000 ) ; +#978 = EDGE_CURVE ( 'NONE', #961, #1868, #727, .T. ) ; +#979 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -4.999999999999998200, -11.25000000000000000 ) ) ; +#980 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#981 = AXIS2_PLACEMENT_3D ( 'NONE', #244, #1318, #406 ) ; +#982 = ORIENTED_EDGE ( 'NONE', *, *, #168, .T. ) ; +#983 = LINE ( 'NONE', #1127, #1439 ) ; +#984 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -4.999999999999998200, -3.750000000000000400 ) ) ; +#985 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.0000000000000000000, 3.750000000000000000 ) ) ; +#986 = ORIENTED_EDGE ( 'NONE', *, *, #269, .F. ) ; +#987 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.999999999999994700, 13.74999999999999800 ) ) ; +#988 = ORIENTED_EDGE ( 'NONE', *, *, #1403, .T. ) ; +#989 = EDGE_CURVE ( 'NONE', #1971, #1112, #687, .T. ) ; +#990 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#991 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -1.373322751814975100E-016, 1.250000000000000700 ) ) ; +#992 = VECTOR ( 'NONE', #1479, 1000.000000000000000 ) ; +#993 = FACE_OUTER_BOUND ( 'NONE', #584, .T. ) ; +#994 = DIRECTION ( 'NONE', ( -6.426167477732054900E-032, 2.308220447633426100E-016, 1.000000000000000000 ) ) ; +#995 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -4.999999999999998200, -11.25000000000000000 ) ) ; +#996 = AXIS2_PLACEMENT_3D ( 'NONE', #634, #1696, #783 ) ; +#997 = CIRCLE ( 'NONE', #1545, 4.999999999999998200 ) ; +#998 = ORIENTED_EDGE ( 'NONE', *, *, #784, .T. ) ; +#999 = ORIENTED_EDGE ( 'NONE', *, *, #648, .F. ) ; +#1000 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.349229370204183400E-016, 9.540486298584920700E-032 ) ) ; +#1001 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999600, -11.25000000000000400 ) ) ; +#1002 = VERTEX_POINT ( 'NONE', #1316 ) ; +#1003 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.999999999999998200, -6.249999999999998200 ) ) ; +#1004 = EDGE_CURVE ( 'NONE', #1855, #1585, #1448, .T. ) ; +#1005 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 30.00000000000002100, -3.749999999999996400 ) ) ; +#1006 = AXIS2_PLACEMENT_3D ( 'NONE', #1124, #1431, #529 ) ; +#1007 = ORIENTED_EDGE ( 'NONE', *, *, #632, .T. ) ; +#1008 = APPROVAL_PERSON_ORGANIZATION ( #1414, #1273, #1909 ) ; +#1009 = VERTEX_POINT ( 'NONE', #553 ) ; +#1010 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.484869283384553900E-047, 6.419766481290788000E-032 ) ) ; +#1011 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1012 = LINE ( 'NONE', #481, #201 ) ; +#1013 = LINE ( 'NONE', #1575, #1966 ) ; +#1014 = ORIENTED_EDGE ( 'NONE', *, *, #1093, .T. ) ; +#1015 = VECTOR ( 'NONE', #514, 1000.000000000000000 ) ; +#1016 = EDGE_CURVE ( 'NONE', #389, #1783, #1450, .T. ) ; +#1017 = ORIENTED_EDGE ( 'NONE', *, *, #1487, .F. ) ; +#1018 = ORIENTED_EDGE ( 'NONE', *, *, #715, .T. ) ; +#1019 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1020 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1021 = AXIS2_PLACEMENT_3D ( 'NONE', #1697, #786, #1857 ) ; +#1022 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 28.66025403784438600, 13.75000000000000200 ) ) ; +#1023 = VECTOR ( 'NONE', #1057, 1000.000000000000000 ) ; +#1024 = EDGE_CURVE ( 'NONE', #144, #404, #1854, .T. ) ; +#1025 = AXIS2_PLACEMENT_3D ( 'NONE', #1478, #1781, #865 ) ; +#1026 = ADVANCED_FACE ( 'NONE', ( #640, #272 ), #1047, .F. ) ; +#1027 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -9.999999999999998200, -7.500000000000003600 ) ) ; +#1028 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1029 = ORIENTED_EDGE ( 'NONE', *, *, #361, .F. ) ; +#1030 = LINE ( 'NONE', #85, #220 ) ; +#1031 = ORIENTED_EDGE ( 'NONE', *, *, #1900, .T. ) ; +#1032 = LINE ( 'NONE', #1284, #1896 ) ; +#1033 = ORIENTED_EDGE ( 'NONE', *, *, #485, .T. ) ; +#1034 = ORIENTED_EDGE ( 'NONE', *, *, #476, .T. ) ; +#1035 = VECTOR ( 'NONE', #1010, 1000.000000000000000 ) ; +#1036 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1037 = EDGE_CURVE ( 'NONE', #812, #98, #230, .T. ) ; +#1038 = VECTOR ( 'NONE', #241, 1000.000000000000000 ) ; +#1039 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995600, 28.54338443017981300, 16.88136934411603500 ) ) ; +#1040 = ADVANCED_FACE ( 'NONE', ( #1402 ), #180, .T. ) ; +#1041 = EDGE_LOOP ( 'NONE', ( #1176, #1007, #1848, #1905 ) ) ; +#1042 = ORIENTED_EDGE ( 'NONE', *, *, #1769, .F. ) ; +#1043 = EDGE_CURVE ( 'NONE', #1608, #418, #589, .T. ) ; +#1044 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.99999999999999600, -6.300000000000002500 ) ) ; +#1045 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000400, 24.33012701892219100, 18.75000000000000000 ) ) ; +#1046 = AXIS2_PLACEMENT_3D ( 'NONE', #1520, #602, #1669 ) ; +#1047 = PLANE ( 'NONE', #1879 ) ; +#1048 = ADVANCED_FACE ( 'NONE', ( #993 ), #136, .F. ) ; +#1049 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 7.500000000000002700, 6.250000000000000900 ) ) ; +#1050 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000000, 28.31889121279257200, 17.14485291326709400 ) ) ; +#1051 = EDGE_CURVE ( 'NONE', #1205, #14, #1803, .T. ) ; +#1052 = VERTEX_POINT ( 'NONE', #298 ) ; +#1053 = LINE ( 'NONE', #670, #925 ) ; +#1054 = VERTEX_POINT ( 'NONE', #1524 ) ; +#1055 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1056 = EDGE_LOOP ( 'NONE', ( #492, #1014, #1827, #914 ) ) ; +#1057 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1058 = ADVANCED_FACE ( 'NONE', ( #551 ), #606, .F. ) ; +#1059 = CIRCLE ( 'NONE', #1459, 1.200000000000000600 ) ; +#1060 = ORIENTED_EDGE ( 'NONE', *, *, #1286, .F. ) ; +#1061 = LINE ( 'NONE', #1420, #1015 ) ; +#1062 = ORIENTED_EDGE ( 'NONE', *, *, #1338, .T. ) ; +#1063 = VERTEX_POINT ( 'NONE', #1064 ) ; +#1064 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.999999999999998200, -11.25000000000000000 ) ) ; +#1065 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999996400, -51.40054944640257200, 8.750000000000000000 ) ) ; +#1066 = AXIS2_PLACEMENT_3D ( 'NONE', #1867, #1409, #953 ) ; +#1067 = ADVANCED_FACE ( 'NONE', ( #1901 ), #897, .F. ) ; +#1068 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999998900, -4.999999999999998200, -3.750000000000000400 ) ) ; +#1069 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1070 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1467, #697, ( #970 ) ) ; +#1071 = VERTEX_POINT ( 'NONE', #305 ) ; +#1072 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1073 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, 19.99999999999999600, 13.74999999999999800 ) ) ; +#1074 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.349229370204183400E-016, 9.540486298584920700E-032 ) ) ; +#1075 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 30.00000000000000000, -6.249999999999998200 ) ) ; +#1076 = EDGE_CURVE ( 'NONE', #1052, #812, #1351, .T. ) ; +#1077 = VERTEX_POINT ( 'NONE', #619 ) ; +#1078 = VERTEX_POINT ( 'NONE', #1528 ) ; +#1079 = AXIS2_PLACEMENT_3D ( 'NONE', #1619, #711, #1771 ) ; +#1080 = FACE_OUTER_BOUND ( 'NONE', #275, .T. ) ; +#1081 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995100, 24.33012701892219100, 18.75000000000000000 ) ) ; +#1082 = ORIENTED_EDGE ( 'NONE', *, *, #853, .T. ) ; +#1083 = VECTOR ( 'NONE', #1766, 1000.000000000000000 ) ; +#1084 = VECTOR ( 'NONE', #588, 1000.000000000000000 ) ; +#1085 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999600, 8.750000000000000000 ) ) ; +#1086 = PLANE ( 'NONE', #352 ) ; +#1087 = VECTOR ( 'NONE', #854, 1000.000000000000000 ) ; +#1088 = VERTEX_POINT ( 'NONE', #1214 ) ; +#1089 = ORIENTED_EDGE ( 'NONE', *, *, #1427, .F. ) ; +#1090 = VERTEX_POINT ( 'NONE', #1379 ) ; +#1091 = PLANE ( 'NONE', #96 ) ; +#1092 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.541976423090495600E-016, 9.986303415341224300E-032 ) ) ; +#1093 = EDGE_CURVE ( 'NONE', #1104, #1805, #500, .T. ) ; +#1094 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 19.99999999999999600, -11.25000000000000400 ) ) ; +#1095 = CARTESIAN_POINT ( 'NONE', ( -10.00000000000000000, 19.99999999999999600, 3.750000000000000000 ) ) ; +#1096 = AXIS2_PLACEMENT_3D ( 'NONE', #33, #1092, #175 ) ; +#1097 = CARTESIAN_POINT ( 'NONE', ( 28.39411254969542900, 24.99999999999999600, -7.500000000000003600 ) ) ; +#1098 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1099 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1100 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1101 = VERTEX_POINT ( 'NONE', #12 ) ; +#1102 = VECTOR ( 'NONE', #1323, 1000.000000000000000 ) ; +#1103 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1104 = VERTEX_POINT ( 'NONE', #1221 ) ; +#1105 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 25.00000000000000000, -11.25000000000000400 ) ) ; +#1106 = EDGE_CURVE ( 'NONE', #1652, #1077, #94, .T. ) ; +#1107 = DATE_AND_TIME ( #1512, #1919 ) ; +#1108 = ORIENTED_EDGE ( 'NONE', *, *, #879, .F. ) ; +#1109 = LINE ( 'NONE', #470, #249 ) ; +#1110 = AXIS2_PLACEMENT_3D ( 'NONE', #816, #1889, #975 ) ; +#1111 = LINE ( 'NONE', #149, #1399 ) ; +#1112 = VERTEX_POINT ( 'NONE', #159 ) ; +#1113 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1114 = CIRCLE ( 'NONE', #1834, 5.000000000000003600 ) ; +#1115 = EDGE_LOOP ( 'NONE', ( #1466, #368 ) ) ; +#1116 = ORIENTED_EDGE ( 'NONE', *, *, #886, .F. ) ; +#1117 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 25.00000000000000000, -6.249999999999998200 ) ) ; +#1118 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999993800, -4.999999999999998200, -3.750000000000000400 ) ) ; +#1119 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 24.99999999999999600, -8.700000000000002800 ) ) ; +#1120 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 7.500000000000003600, 1.250000000000001100 ) ) ; +#1121 = EDGE_CURVE ( 'NONE', #660, #1948, #1658, .T. ) ; +#1122 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.349229370204183400E-016, 9.540486298584920700E-032 ) ) ; +#1123 = VERTEX_POINT ( 'NONE', #1386 ) ; +#1124 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999600, 18.75000000000000000 ) ) ; +#1125 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, 28.66025403784437500, 13.75000000000000200 ) ) ; +#1126 = PLANE ( 'NONE', #366 ) ; +#1127 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999300, -14.99999999999998600, 43.68416490252569400 ) ) ; +#1128 = ORIENTED_EDGE ( 'NONE', *, *, #1895, .F. ) ; +#1129 = EDGE_CURVE ( 'NONE', #1325, #1783, #1309, .T. ) ; +#1130 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 30.00000000000000000, -6.250000000000003600 ) ) ; +#1131 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 20.00000000000000400, 1.250000000000003100 ) ) ; +#1132 = ORIENTED_EDGE ( 'NONE', *, *, #1393, .T. ) ; +#1133 = CIRCLE ( 'NONE', #705, 1.200000000000000600 ) ; +#1134 = ORIENTED_EDGE ( 'NONE', *, *, #1900, .F. ) ; +#1135 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1136 = LINE ( 'NONE', #84, #726 ) ; +#1137 = CIRCLE ( 'NONE', #1364, 4.999999999999998200 ) ; +#1138 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#1139 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -51.40054944640257200, 8.750000000000000000 ) ) ; +#1140 = ORIENTED_EDGE ( 'NONE', *, *, #377, .F. ) ; +#1141 = VERTEX_POINT ( 'NONE', #1691 ) ; +#1142 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1143 = EDGE_CURVE ( 'NONE', #444, #878, #51, .T. ) ; +#1144 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#1145 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 24.99999999999999600, -7.500000000000003600 ) ) ; +#1146 = EDGE_CURVE ( 'NONE', #98, #1566, #852, .T. ) ; +#1147 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, 19.99999999999999600, -6.250000000000001800 ) ) ; +#1148 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1149 = AXIS2_PLACEMENT_3D ( 'NONE', #1663, #1969, #1510 ) ; +#1150 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -4.999999999999998200, -6.250000000000006200 ) ) ; +#1151 = EDGE_LOOP ( 'NONE', ( #1583, #779, #1523, #746, #1645, #999 ) ) ; +#1152 = LINE ( 'NONE', #1922, #338 ) ; +#1153 = ORIENTED_EDGE ( 'NONE', *, *, #824, .T. ) ; +#1154 = PERSON_AND_ORGANIZATION ( #696, #892 ) ; +#1155 = ORIENTED_EDGE ( 'NONE', *, *, #393, .T. ) ; +#1156 = EDGE_CURVE ( 'NONE', #404, #144, #1758, .T. ) ; +#1157 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1158 = FACE_OUTER_BOUND ( 'NONE', #1486, .T. ) ; +#1159 = FACE_BOUND ( 'NONE', #1115, .T. ) ; +#1160 = ORIENTED_EDGE ( 'NONE', *, *, #24, .F. ) ; +#1161 = LINE ( 'NONE', #646, #805 ) ; +#1162 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -4.999999999999997300, 3.750000000000000000 ) ) ; +#1163 = AXIS2_PLACEMENT_3D ( 'NONE', #1910, #1000, #90 ) ; +#1164 = ORIENTED_EDGE ( 'NONE', *, *, #446, .F. ) ; +#1165 = ORIENTED_EDGE ( 'NONE', *, *, #1282, .F. ) ; +#1166 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 7.500000000000002700, 6.250000000000000900 ) ) ; +#1167 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1168 = VERTEX_POINT ( 'NONE', #486 ) ; +#1169 = AXIS2_PLACEMENT_3D ( 'NONE', #62, #1122, #209 ) ; +#1170 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 30.00000000000000000, 8.750000000000000000 ) ) ; +#1171 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #1818, #1759, ( #970 ) ) ; +#1172 = ORIENTED_EDGE ( 'NONE', *, *, #1833, .T. ) ; +#1173 = ORIENTED_EDGE ( 'NONE', *, *, #1188, .F. ) ; +#1174 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -4.999999999999995600, 13.74999999999999800 ) ) ; +#1175 = CIRCLE ( 'NONE', #506, 1.199999999999999700 ) ; +#1176 = ORIENTED_EDGE ( 'NONE', *, *, #161, .F. ) ; +#1177 = FACE_OUTER_BOUND ( 'NONE', #1230, .T. ) ; +#1178 = EDGE_CURVE ( 'NONE', #139, #1413, #1202, .T. ) ; +#1179 = FACE_OUTER_BOUND ( 'NONE', #265, .T. ) ; +#1180 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1181 = EDGE_LOOP ( 'NONE', ( #1417, #233, #1844, #1480 ) ) ; +#1182 = ORIENTED_EDGE ( 'NONE', *, *, #1883, .F. ) ; +#1183 = DESIGN_CONTEXT ( 'detailed design', #838, 'design' ) ; +#1184 = ADVANCED_FACE ( 'NONE', ( #1710 ), #34, .F. ) ; +#1185 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999600, 13.74999999999999800 ) ) ; +#1186 = CIRCLE ( 'NONE', #461, 2.062556682370380000 ) ; +#1187 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996400, 28.19689453278165600, 17.25504606171754300 ) ) ; +#1188 = EDGE_CURVE ( 'NONE', #1473, #1088, #1161, .T. ) ; +#1189 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.99999999999999600, -6.250000000000003600 ) ) ; +#1190 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1191 = VERTEX_POINT ( 'NONE', #1554 ) ; +#1192 = VECTOR ( 'NONE', #1458, 1000.000000000000000 ) ; +#1193 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 30.00000000000001400, 43.68416490252569400 ) ) ; +#1194 = ADVANCED_FACE ( 'NONE', ( #347 ), #753, .T. ) ; +#1195 = ORIENTED_EDGE ( 'NONE', *, *, #541, .F. ) ; +#1196 = PERSON_AND_ORGANIZATION ( #696, #892 ) ; +#1197 = ORIENTED_EDGE ( 'NONE', *, *, #218, .F. ) ; +#1198 = ORIENTED_EDGE ( 'NONE', *, *, #505, .F. ) ; +#1199 = FACE_OUTER_BOUND ( 'NONE', #1737, .T. ) ; +#1200 = CARTESIAN_POINT ( 'NONE', ( 27.49999999999999600, 28.84435595928381000, 16.48213963525442300 ) ) ; +#1201 = CYLINDRICAL_SURFACE ( 'NONE', #382, 1.200000000000000600 ) ; +#1202 = LINE ( 'NONE', #637, #402 ) ; +#1203 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.561251128379126400E-016, 1.000000000000000000 ) ) ; +#1204 = EDGE_LOOP ( 'NONE', ( #605, #1424, #1804, #1657 ) ) ; +#1205 = VERTEX_POINT ( 'NONE', #1860 ) ; +#1206 = EDGE_CURVE ( 'NONE', #98, #893, #1926, .T. ) ; +#1207 = ADVANCED_FACE ( 'NONE', ( #1967 ), #297, .T. ) ; +#1208 = PLANE ( 'NONE', #1355 ) ; +#1209 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 30.00000000000001400, 43.68416490252569400 ) ) ; +#1210 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #1801 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #77, #1138, #221 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#1211 = ORIENTED_EDGE ( 'NONE', *, *, #407, .T. ) ; +#1212 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.734723475976806800E-016 ) ) ; +#1213 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1214 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 5.437443317629622200, 6.250000000000001800 ) ) ; +#1215 = EDGE_CURVE ( 'NONE', #1938, #1123, #710, .T. ) ; +#1216 = ADVANCED_FACE ( 'NONE', ( #1474 ), #1568, .T. ) ; +#1217 = AXIS2_PLACEMENT_3D ( 'NONE', #503, #1561, #649 ) ; +#1218 = ORIENTED_EDGE ( 'NONE', *, *, #1326, .F. ) ; +#1219 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.00000000000000400, 1.250000000000003800 ) ) ; +#1220 = ORIENTED_EDGE ( 'NONE', *, *, #771, .F. ) ; +#1221 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -9.999999999999998200, -8.700000000000002800 ) ) ; +#1222 = CYLINDRICAL_SURFACE ( 'NONE', #287, 1.200000000000000600 ) ; +#1223 = ORIENTED_EDGE ( 'NONE', *, *, #1734, .T. ) ; +#1224 = VECTOR ( 'NONE', #226, 1000.000000000000000 ) ; +#1225 = VECTOR ( 'NONE', #1499, 1000.000000000000000 ) ; +#1226 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 24.99999999999999600, -6.250000000000003600 ) ) ; +#1227 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1228 = CIRCLE ( 'NONE', #1163, 5.000000000000004400 ) ; +#1229 = EDGE_CURVE ( 'NONE', #807, #1054, #1878, .T. ) ; +#1230 = EDGE_LOOP ( 'NONE', ( #392, #348, #356, #722, #1089 ) ) ; +#1231 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995100, -51.40054944640257200, 18.75000000000000000 ) ) ; +#1232 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1233 = AXIS2_PLACEMENT_3D ( 'NONE', #108, #1788, #874 ) ; +#1234 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1235 = VECTOR ( 'NONE', #193, 1000.000000000000000 ) ; +#1236 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1237 = EDGE_CURVE ( 'NONE', #1958, #26, #1114, .T. ) ; +#1238 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1239 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1240 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -2.308220447633426100E-016 ) ) ; +#1241 = CARTESIAN_POINT ( 'NONE', ( 28.39411254969542900, 24.99999999999999600, -7.500000000000003600 ) ) ; +#1242 = EDGE_CURVE ( 'NONE', #1768, #855, #663, .T. ) ; +#1243 = ORIENTED_EDGE ( 'NONE', *, *, #1693, .T. ) ; +#1244 = CYLINDRICAL_SURFACE ( 'NONE', #419, 5.000000000000000900 ) ; +#1245 = ORIENTED_EDGE ( 'NONE', *, *, #259, .F. ) ; +#1246 = AXIS2_PLACEMENT_3D ( 'NONE', #4, #148, #1212 ) ; +#1247 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1248 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1249 = CARTESIAN_POINT ( 'NONE', ( 28.39411254969542900, -9.999999999999998200, -7.500000000000003600 ) ) ; +#1250 = ORIENTED_EDGE ( 'NONE', *, *, #111, .T. ) ; +#1251 = LINE ( 'NONE', #1640, #448 ) ; +#1252 = LINE ( 'NONE', #740, #1733 ) ; +#1253 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 19.99999999999999600, -3.749999999999995100 ) ) ; +#1254 = VECTOR ( 'NONE', #317, 1000.000000000000000 ) ; +#1255 = ORIENTED_EDGE ( 'NONE', *, *, #1326, .T. ) ; +#1256 = ORIENTED_EDGE ( 'NONE', *, *, #431, .F. ) ; +#1257 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 24.99999999999999600, -7.500000000000003600 ) ) ; +#1258 = EDGE_CURVE ( 'NONE', #1453, #389, #1061, .T. ) ; +#1259 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1260 = VECTOR ( 'NONE', #55, 1000.000000000000000 ) ; +#1261 = AXIS2_PLACEMENT_3D ( 'NONE', #991, #385, #1455 ) ; +#1262 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1263 = EDGE_LOOP ( 'NONE', ( #1475, #472, #73, #1128 ) ) ; +#1264 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1265 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 30.00000000000000000, 8.750000000000000000 ) ) ; +#1266 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.561251128379126400E-016 ) ) ; +#1267 = EDGE_LOOP ( 'NONE', ( #242, #46, #101, #1616 ) ) ; +#1268 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999993800, -14.99999999999998600, 43.68416490252569400 ) ) ; +#1269 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000400, -51.40054944640257200, 18.75000000000000000 ) ) ; +#1270 = AXIS2_PLACEMENT_3D ( 'NONE', #1429, #522, #1580 ) ; +#1271 = ORIENTED_EDGE ( 'NONE', *, *, #1588, .T. ) ; +#1272 = CYLINDRICAL_SURFACE ( 'NONE', #1863, 10.00000000000000000 ) ; +#1273 = APPROVAL ( #845, 'UNSPECIFIED' ) ; +#1274 = ORIENTED_EDGE ( 'NONE', *, *, #11, .T. ) ; +#1275 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1276 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -4.999999999999994700, 13.74999999999999800 ) ) ; +#1277 = VECTOR ( 'NONE', #1586, 1000.000000000000000 ) ; +#1278 = VECTOR ( 'NONE', #183, 1000.000000000000000 ) ; +#1279 = LINE ( 'NONE', #212, #477 ) ; +#1280 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1281 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.561251128379126400E-016, -1.000000000000000000 ) ) ; +#1282 = EDGE_CURVE ( 'NONE', #1752, #961, #1421, .T. ) ; +#1283 = EDGE_LOOP ( 'NONE', ( #1635, #1881 ) ) ; +#1284 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.499999999999992900, 13.75000000000000200 ) ) ; +#1285 = PLANE ( 'NONE', #650 ) ; +#1286 = EDGE_CURVE ( 'NONE', #181, #349, #251, .T. ) ; +#1287 = PLANE ( 'NONE', #577 ) ; +#1288 = AXIS2_PLACEMENT_3D ( 'NONE', #1166, #252, #408 ) ; +#1289 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1290 = LINE ( 'NONE', #1095, #882 ) ; +#1291 = CARTESIAN_POINT ( 'NONE', ( 28.39411254969542900, -9.999999999999998200, -7.500000000000003600 ) ) ; +#1292 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1293 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995600, 29.64638456105631900, 14.43001755832249300 ) ) ; +#1294 = ORIENTED_EDGE ( 'NONE', *, *, #1569, .T. ) ; +#1295 = VECTOR ( 'NONE', #1902, 1000.000000000000000 ) ; +#1296 = EDGE_CURVE ( 'NONE', #1805, #1104, #612, .T. ) ; +#1297 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#1298 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1299 = ORIENTED_EDGE ( 'NONE', *, *, #930, .F. ) ; +#1300 = SHAPE_DEFINITION_REPRESENTATION ( #323, #1306 ) ; +#1301 = ORIENTED_EDGE ( 'NONE', *, *, #1346, .F. ) ; +#1302 = ORIENTED_EDGE ( 'NONE', *, *, #1650, .T. ) ; +#1303 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 30.00000000000000000, 3.750000000000000000 ) ) ; +#1304 = AXIS2_PLACEMENT_3D ( 'NONE', #1120, #205, #1266 ) ; +#1305 = CIRCLE ( 'NONE', #547, 5.000000000000000900 ) ; +#1306 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Hammer_Body', ( #1913, #1723 ), #1210 ) ; +#1307 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995600, 29.68245836551852800, 13.75000000000000200 ) ) ; +#1308 = EDGE_LOOP ( 'NONE', ( #635, #1581 ) ) ; +#1309 = LINE ( 'NONE', #1231, #450 ) ; +#1310 = LINE ( 'NONE', #1483, #1802 ) ; +#1311 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.999999999999998200, -6.250000000000001800 ) ) ; +#1312 = VERTEX_POINT ( 'NONE', #965 ) ; +#1313 = ORIENTED_EDGE ( 'NONE', *, *, #1785, .T. ) ; +#1314 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.561251128379126400E-016, -1.000000000000000000 ) ) ; +#1315 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 2.308220447633426100E-016, 1.000000000000000000 ) ) ; +#1316 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 30.00000000000000400, -6.249999999999998200 ) ) ; +#1317 = EDGE_CURVE ( 'NONE', #288, #176, #156, .T. ) ; +#1318 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1319 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1320 = ORIENTED_EDGE ( 'NONE', *, *, #1435, .T. ) ; +#1321 = AXIS2_PLACEMENT_3D ( 'NONE', #71, #1590, #679 ) ; +#1322 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1323 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1324 = ORIENTED_EDGE ( 'NONE', *, *, #1588, .F. ) ; +#1325 = VERTEX_POINT ( 'NONE', #1886 ) ; +#1326 = EDGE_CURVE ( 'NONE', #1191, #1090, #1779, .T. ) ; +#1327 = FACE_OUTER_BOUND ( 'NONE', #1956, .T. ) ; +#1328 = VERTEX_POINT ( 'NONE', #357 ) ; +#1329 = LINE ( 'NONE', #373, #920 ) ; +#1330 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.561251128379126400E-016, -1.000000000000000000 ) ) ; +#1331 = AXIS2_PLACEMENT_3D ( 'NONE', #1094, #1240, #331 ) ; +#1332 = LINE ( 'NONE', #790, #1683 ) ; +#1333 = VERTEX_POINT ( 'NONE', #819 ) ; +#1334 = ORIENTED_EDGE ( 'NONE', *, *, #124, .T. ) ; +#1335 = ORIENTED_EDGE ( 'NONE', *, *, #429, .F. ) ; +#1336 = ORIENTED_EDGE ( 'NONE', *, *, #813, .T. ) ; +#1337 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 18.75000000000000000 ) ) ; +#1338 = EDGE_CURVE ( 'NONE', #1948, #631, #568, .T. ) ; +#1339 = VECTOR ( 'NONE', #1692, 1000.000000000000000 ) ; +#1340 = ADVANCED_FACE ( 'NONE', ( #112 ), #1126, .T. ) ; +#1341 = ORIENTED_EDGE ( 'NONE', *, *, #1602, .F. ) ; +#1342 = FACE_BOUND ( 'NONE', #1283, .T. ) ; +#1343 = VERTEX_POINT ( 'NONE', #676 ) ; +#1344 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1345 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1346 = EDGE_CURVE ( 'NONE', #208, #1752, #523, .T. ) ; +#1347 = ORIENTED_EDGE ( 'NONE', *, *, #935, .F. ) ; +#1348 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995100, 27.54650033327952800, 17.80084120209619800 ) ) ; +#1349 = CIRCLE ( 'NONE', #329, 5.000000000000000900 ) ; +#1350 = EDGE_CURVE ( 'NONE', #1958, #1396, #1329, .T. ) ; +#1351 = CIRCLE ( 'NONE', #613, 12.50000000000000000 ) ; +#1352 = ADVANCED_FACE ( 'NONE', ( #68 ), #1287, .F. ) ; +#1353 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1354 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, 19.99999999999999600, -3.749999999999996400 ) ) ; +#1355 = AXIS2_PLACEMENT_3D ( 'NONE', #457, #756, #1821 ) ; +#1356 = ORIENTED_EDGE ( 'NONE', *, *, #935, .T. ) ; +#1357 = VERTEX_POINT ( 'NONE', #1595 ) ; +#1358 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.541976423090495600E-016, 9.986303415341224300E-032 ) ) ; +#1359 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 19.99999999999999600, -6.250000000000001800 ) ) ; +#1360 = CARTESIAN_POINT ( 'NONE', ( 27.49999999999999600, 29.10858880658319200, 16.04496837786719600 ) ) ; +#1361 = ORIENTED_EDGE ( 'NONE', *, *, #223, .T. ) ; +#1362 = EDGE_CURVE ( 'NONE', #1701, #208, #473, .T. ) ; +#1363 = ADVANCED_FACE ( 'NONE', ( #872 ), #21, .F. ) ; +#1364 = AXIS2_PLACEMENT_3D ( 'NONE', #1311, #391, #1461 ) ; +#1365 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.541976423090495600E-016, 9.986303415341224300E-032 ) ) ; +#1366 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 10.00000000000000400, 1.250000000000002200 ) ) ; +#1367 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1368 = ORIENTED_EDGE ( 'NONE', *, *, #300, .T. ) ; +#1369 = DATE_AND_TIME ( #1774, #198 ) ; +#1370 = ORIENTED_EDGE ( 'NONE', *, *, #1530, .F. ) ; +#1371 = ADVANCED_FACE ( 'NONE', ( #1630, #1681 ), #1756, .F. ) ; +#1372 = FACE_OUTER_BOUND ( 'NONE', #1894, .T. ) ; +#1373 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1374 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1375 = VECTOR ( 'NONE', #1391, 1000.000000000000000 ) ; +#1376 = ORIENTED_EDGE ( 'NONE', *, *, #1215, .F. ) ; +#1377 = VECTOR ( 'NONE', #61, 1000.000000000000000 ) ; +#1378 = LINE ( 'NONE', #1493, #1084 ) ; +#1379 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000400, 24.33012701892219100, 18.75000000000000000 ) ) ; +#1380 = VECTOR ( 'NONE', #1549, 1000.000000000000000 ) ; +#1381 = ORIENTED_EDGE ( 'NONE', *, *, #1362, .T. ) ; +#1382 = ORIENTED_EDGE ( 'NONE', *, *, #41, .T. ) ; +#1383 = AXIS2_PLACEMENT_3D ( 'NONE', #820, #1887, #974 ) ; +#1384 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 30.00000000000000000, 8.750000000000000000 ) ) ; +#1385 = CC_DESIGN_APPROVAL ( #1273, ( #970 ) ) ; +#1386 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 19.99999999999999600, 13.74999999999999800 ) ) ; +#1387 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.99999999999999600, -7.500000000000003600 ) ) ; +#1388 = EDGE_CURVE ( 'NONE', #1652, #1797, #825, .T. ) ; +#1389 = CIRCLE ( 'NONE', #1817, 5.000000000000000000 ) ; +#1390 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1391 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1392 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.499999999999992900, 13.75000000000000200 ) ) ; +#1393 = EDGE_CURVE ( 'NONE', #807, #571, #1587, .T. ) ; +#1394 = VERTEX_POINT ( 'NONE', #1147 ) ; +#1395 = VECTOR ( 'NONE', #358, 1000.000000000000000 ) ; +#1396 = VERTEX_POINT ( 'NONE', #1303 ) ; +#1397 = EDGE_LOOP ( 'NONE', ( #559, #915 ) ) ; +#1398 = VECTOR ( 'NONE', #1322, 1000.000000000000000 ) ; +#1399 = VECTOR ( 'NONE', #1213, 1000.000000000000000 ) ; +#1400 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 24.99999999999999600, -6.300000000000002500 ) ) ; +#1401 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 19.99999999999999600, 18.75000000000000000 ) ) ; +#1402 = FACE_OUTER_BOUND ( 'NONE', #1623, .T. ) ; +#1403 = EDGE_CURVE ( 'NONE', #563, #302, #1136, .T. ) ; +#1404 = ORIENTED_EDGE ( 'NONE', *, *, #210, .T. ) ; +#1405 = ORIENTED_EDGE ( 'NONE', *, *, #377, .T. ) ; +#1406 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -9.999999999999998200, -6.250000000000001800 ) ) ; +#1407 = AXIS2_PLACEMENT_3D ( 'NONE', #1239, #1553, #645 ) ; +#1408 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -9.999999999999994700, 18.75000000000000000 ) ) ; +#1409 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1410 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1411 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 25.00000000000000000, -6.249999999999998200 ) ) ; +#1412 = AXIS2_PLACEMENT_3D ( 'NONE', #13, #1072, #160 ) ; +#1413 = VERTEX_POINT ( 'NONE', #1911 ) ; +#1414 = PERSON_AND_ORGANIZATION ( #696, #892 ) ; +#1415 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 19.99999999999999600, -6.249999999999997300 ) ) ; +#1416 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.541976423090495600E-016, 9.986303415341224300E-032 ) ) ; +#1417 = ORIENTED_EDGE ( 'NONE', *, *, #237, .F. ) ; +#1418 = VECTOR ( 'NONE', #762, 1000.000000000000000 ) ; +#1419 = ORIENTED_EDGE ( 'NONE', *, *, #1317, .F. ) ; +#1420 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995600, -51.40054944640257200, 13.75000000000000200 ) ) ; +#1421 = LINE ( 'NONE', #957, #206 ) ; +#1422 = LINE ( 'NONE', #266, #968 ) ; +#1423 = ORIENTED_EDGE ( 'NONE', *, *, #1229, .F. ) ; +#1424 = ORIENTED_EDGE ( 'NONE', *, *, #335, .T. ) ; +#1425 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1426 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.99999999999999600, -6.300000000000002500 ) ) ; +#1427 = EDGE_CURVE ( 'NONE', #1773, #268, #774, .T. ) ; +#1428 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -9.999999999999998200, -7.500000000000003600 ) ) ; +#1429 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999300, -9.999999999999998200, -6.250000000000006200 ) ) ; +#1430 = AXIS2_PLACEMENT_3D ( 'NONE', #791, #178, #948 ) ; +#1431 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1432 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1433 = LINE ( 'NONE', #1065, #258 ) ; +#1434 = DIRECTION ( 'NONE', ( 6.419766481290786900E-032, -2.312964634635743000E-016, -1.000000000000000000 ) ) ; +#1435 = EDGE_CURVE ( 'NONE', #1741, #631, #1942, .T. ) ; +#1436 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.999999999999994700, 18.75000000000000000 ) ) ; +#1437 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1438 = ORIENTED_EDGE ( 'NONE', *, *, #1530, .T. ) ; +#1439 = VECTOR ( 'NONE', #1745, 1000.000000000000000 ) ; +#1440 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -4.999999999999993800, 18.75000000000000000 ) ) ; +#1441 = AXIS2_PLACEMENT_3D ( 'NONE', #1936, #1020, #261 ) ; +#1442 = EDGE_LOOP ( 'NONE', ( #866, #469, #1376, #846, #1570, #411 ) ) ; +#1443 = CYLINDRICAL_SURFACE ( 'NONE', #1006, 10.00000000000000000 ) ; +#1444 = VERTEX_POINT ( 'NONE', #1462 ) ; +#1445 = ORIENTED_EDGE ( 'NONE', *, *, #574, .F. ) ; +#1446 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1447 = CIRCLE ( 'NONE', #229, 10.00000000000000200 ) ; +#1448 = LINE ( 'NONE', #403, #1038 ) ; +#1449 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999996400, -7.500000000000000000, 8.750000000000000000 ) ) ; +#1450 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1307, #388, #1293, #538, #1917, #1798, #885, #1952, #1039, #129, #1187, #277, #1348, #436, #1500, #590, #1648, #737, #1806, #895 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 5.204170427930421300E-018, 0.001014556480365311100, 0.002029112960730617000, 0.003043669441095931600, 0.003550947681278589100, 0.004058225921461247100, 0.005072782401826562100, 0.006087338882191878000, 0.007101895362557193900, 0.008116451842922509800 ), + .UNSPECIFIED. ) ; +#1451 = EDGE_CURVE ( 'NONE', #1797, #106, #1491, .T. ) ; +#1452 = ORIENTED_EDGE ( 'NONE', *, *, #1791, .T. ) ; +#1453 = VERTEX_POINT ( 'NONE', #557 ) ; +#1454 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#1455 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.561251128379126400E-016 ) ) ; +#1456 = EDGE_CURVE ( 'NONE', #26, #591, #1899, .T. ) ; +#1457 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, -2.312964634635743400E-016, -1.000000000000000000 ) ) ; +#1458 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1459 = AXIS2_PLACEMENT_3D ( 'NONE', #1830, #918, #9 ) ; +#1460 = CIRCLE ( 'NONE', #1169, 4.999999999999997300 ) ; +#1461 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1462 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -14.99999999999999600, 13.75000000000000000 ) ) ; +#1463 = ORIENTED_EDGE ( 'NONE', *, *, #623, .T. ) ; +#1464 = FACE_OUTER_BOUND ( 'NONE', #520, .T. ) ; +#1465 = EDGE_CURVE ( 'NONE', #1078, #495, #685, .T. ) ; +#1466 = ORIENTED_EDGE ( 'NONE', *, *, #1043, .F. ) ; +#1467 = PERSON_AND_ORGANIZATION ( #696, #892 ) ; +#1468 = EDGE_LOOP ( 'NONE', ( #1017, #1672, #1897, #1856 ) ) ; +#1469 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1470 = AXIS2_PLACEMENT_3D ( 'NONE', #987, #1597, #1289 ) ; +#1471 = CIRCLE ( 'NONE', #1557, 5.000000000000000900 ) ; +#1472 = VECTOR ( 'NONE', #19, 1000.000000000000000 ) ; +#1473 = VERTEX_POINT ( 'NONE', #1921 ) ; +#1474 = FACE_OUTER_BOUND ( 'NONE', #502, .T. ) ; +#1475 = ORIENTED_EDGE ( 'NONE', *, *, #1456, .F. ) ; +#1476 = ORIENTED_EDGE ( 'NONE', *, *, #1037, .T. ) ; +#1477 = CARTESIAN_POINT ( 'NONE', ( 28.39411254969542900, 24.99999999999999600, -6.300000000000002500 ) ) ; +#1478 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.99999999999999600, -6.250000000000003600 ) ) ; +#1479 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1480 = ORIENTED_EDGE ( 'NONE', *, *, #732, .F. ) ; +#1481 = CC_DESIGN_SECURITY_CLASSIFICATION ( #970, ( #464 ) ) ; +#1482 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1483 = CARTESIAN_POINT ( 'NONE', ( 28.39411254969542900, -9.999999999999998200, -6.300000000000002500 ) ) ; +#1484 = EDGE_CURVE ( 'NONE', #1538, #561, #321, .T. ) ; +#1485 = ORIENTED_EDGE ( 'NONE', *, *, #729, .F. ) ; +#1486 = EDGE_LOOP ( 'NONE', ( #1173, #5, #1970, #439 ) ) ; +#1487 = EDGE_CURVE ( 'NONE', #1357, #1585, #270, .T. ) ; +#1488 = VECTOR ( 'NONE', #1578, 1000.000000000000000 ) ; +#1489 = ORIENTED_EDGE ( 'NONE', *, *, #30, .T. ) ; +#1490 = ADVANCED_FACE ( 'NONE', ( #1177 ), #636, .T. ) ; +#1491 = LINE ( 'NONE', #95, #1083 ) ; +#1492 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1493 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.99999999999999600, -11.25000000000000500 ) ) ; +#1494 = AXIS2_PLACEMENT_3D ( 'NONE', #864, #1932, #1019 ) ; +#1495 = VECTOR ( 'NONE', #1157, 1000.000000000000000 ) ; +#1496 = EDGE_LOOP ( 'NONE', ( #396, #1042, #1489, #1925, #926, #1775, #1662, #1302, #1438, #780 ) ) ; +#1497 = ORIENTED_EDGE ( 'NONE', *, *, #311, .F. ) ; +#1498 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 30.00000000000000000, 3.750000000000004400 ) ) ; +#1499 = DIRECTION ( 'NONE', ( 1.349229370204183400E-016, 1.000000000000000000, 1.445602896647339700E-016 ) ) ; +#1500 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995100, 26.65422906204106800, 18.29534796921100800 ) ) ; +#1501 = EDGE_CURVE ( 'NONE', #843, #1828, #228, .T. ) ; +#1502 = ADVANCED_FACE ( 'NONE', ( #586 ), #564, .T. ) ; +#1503 = VECTOR ( 'NONE', #482, 1000.000000000000000 ) ; +#1504 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, -7.499999999999996400, 13.75000000000000200 ) ) ; +#1505 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.349229370204183400E-016, -9.540486298584920700E-032 ) ) ; +#1506 = ORIENTED_EDGE ( 'NONE', *, *, #639, .F. ) ; +#1507 = FACE_OUTER_BOUND ( 'NONE', #768, .T. ) ; +#1508 = ADVANCED_FACE ( 'NONE', ( #1800 ), #1780, .T. ) ; +#1509 = EDGE_LOOP ( 'NONE', ( #1445, #1218, #478, #155, #1195 ) ) ; +#1510 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1511 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000400, 29.39647808068119200, 15.42490461054697100 ) ) ; +#1512 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#1513 = ORIENTED_EDGE ( 'NONE', *, *, #952, .T. ) ; +#1514 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 7.500000000000003600, 1.250000000000001800 ) ) ; +#1515 = LINE ( 'NONE', #910, #1564 ) ; +#1516 = FACE_OUTER_BOUND ( 'NONE', #871, .T. ) ; +#1517 = ORIENTED_EDGE ( 'NONE', *, *, #1229, .T. ) ; +#1518 = AXIS2_PLACEMENT_3D ( 'NONE', #1529, #620, #1676 ) ; +#1519 = VECTOR ( 'NONE', #1099, 1000.000000000000000 ) ; +#1520 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 19.99999999999999600, 13.75000000000000000 ) ) ; +#1521 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1522 = VERTEX_POINT ( 'NONE', #1625 ) ; +#1523 = ORIENTED_EDGE ( 'NONE', *, *, #1637, .F. ) ; +#1524 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, -4.999999999999994700, 18.75000000000000000 ) ) ; +#1525 = ADVANCED_FACE ( 'NONE', ( #1757 ), #257, .F. ) ; +#1526 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.541976423090495400E-016 ) ) ; +#1527 = ORIENTED_EDGE ( 'NONE', *, *, #1258, .T. ) ; +#1528 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -14.99999999999999800, 3.750000000000000000 ) ) ; +#1529 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 7.500000000000002700, 6.250000000000001800 ) ) ; +#1530 = EDGE_CURVE ( 'NONE', #1312, #1566, #177, .T. ) ; +#1531 = AXIS2_PLACEMENT_3D ( 'NONE', #1866, #190, #1259 ) ; +#1532 = ADVANCED_FACE ( 'NONE', ( #550 ), #107, .T. ) ; +#1533 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999994700, -9.999999999999998200, -6.250000000000001800 ) ) ; +#1534 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1535 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1536 = EDGE_LOOP ( 'NONE', ( #1018, #998 ) ) ; +#1537 = LINE ( 'NONE', #1269, #1395 ) ; +#1538 = VERTEX_POINT ( 'NONE', #260 ) ; +#1539 = VECTOR ( 'NONE', #1262, 1000.000000000000000 ) ; +#1540 = ORIENTED_EDGE ( 'NONE', *, *, #1215, .T. ) ; +#1541 = EDGE_CURVE ( 'NONE', #337, #1333, #133, .T. ) ; +#1542 = VECTOR ( 'NONE', #552, 1000.000000000000000 ) ; +#1543 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 7.500000000000003600, 1.250000000000001100 ) ) ; +#1544 = LINE ( 'NONE', #1150, #325 ) ; +#1545 = AXIS2_PLACEMENT_3D ( 'NONE', #1796, #884, #1951 ) ; +#1546 = ORIENTED_EDGE ( 'NONE', *, *, #76, .F. ) ; +#1547 = ORIENTED_EDGE ( 'NONE', *, *, #102, .F. ) ; +#1548 = CARTESIAN_POINT ( 'NONE', ( 27.49999999999998900, -7.500000000000000000, -2.923600006680557300E-014 ) ) ; +#1549 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1550 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1551 = CIRCLE ( 'NONE', #863, 1.199999999999999700 ) ; +#1552 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.999999999999994700, 18.75000000000000000 ) ) ; +#1553 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1554 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, 19.99999999999999600, 18.75000000000000000 ) ) ; +#1555 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999300, -9.999999999999998200, -8.700000000000002800 ) ) ; +#1556 = EDGE_CURVE ( 'NONE', #349, #1938, #1447, .T. ) ; +#1557 = AXIS2_PLACEMENT_3D ( 'NONE', #1226, #315, #1390 ) ; +#1558 = ORIENTED_EDGE ( 'NONE', *, *, #623, .F. ) ; +#1559 = LINE ( 'NONE', #1001, #794 ) ; +#1560 = EDGE_LOOP ( 'NONE', ( #1712, #130, #1060, #688, #1134, #1497, #580, #1250, #494, #1793 ) ) ; +#1561 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.561251128379126400E-016, 1.000000000000000000 ) ) ; +#1562 = DATE_AND_TIME ( #1961, #394 ) ; +#1563 = ORIENTED_EDGE ( 'NONE', *, *, #886, .T. ) ; +#1564 = VECTOR ( 'NONE', #295, 1000.000000000000000 ) ; +#1565 = FACE_BOUND ( 'NONE', #1397, .T. ) ; +#1566 = VERTEX_POINT ( 'NONE', #575 ) ; +#1567 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1568 = TOROIDAL_SURFACE ( 'NONE', #1531, 5.000000000000000000, 5.000000000000000000 ) ; +#1569 = EDGE_CURVE ( 'NONE', #1168, #1719, #1349, .T. ) ; +#1570 = ORIENTED_EDGE ( 'NONE', *, *, #675, .F. ) ; +#1571 = ORIENTED_EDGE ( 'NONE', *, *, #1178, .T. ) ; +#1572 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -9.999999999999994700, 13.74999999999999800 ) ) ; +#1573 = AXIS2_PLACEMENT_3D ( 'NONE', #282, #1358, #445 ) ; +#1574 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.349229370204183400E-016, -9.540486298584920700E-032 ) ) ; +#1575 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.500000000000000000, 8.750000000000000000 ) ) ; +#1576 = ORIENTED_EDGE ( 'NONE', *, *, #513, .F. ) ; +#1577 = EDGE_CURVE ( 'NONE', #1168, #467, #1706, .T. ) ; +#1578 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1579 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1580 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1581 = ORIENTED_EDGE ( 'NONE', *, *, #1427, .T. ) ; +#1582 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #79 ) ) ; +#1583 = ORIENTED_EDGE ( 'NONE', *, *, #124, .F. ) ; +#1584 = CIRCLE ( 'NONE', #599, 10.00000000000000000 ) ; +#1585 = VERTEX_POINT ( 'NONE', #1943 ) ; +#1586 = DIRECTION ( 'NONE', ( 9.540486298584920700E-032, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1587 = LINE ( 'NONE', #235, #371 ) ; +#1588 = EDGE_CURVE ( 'NONE', #1768, #288, #496, .T. ) ; +#1589 = CYLINDRICAL_SURFACE ( 'NONE', #858, 5.000000000000000900 ) ; +#1590 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.561251128379126400E-016, -1.000000000000000000 ) ) ; +#1591 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1592 = ORIENTED_EDGE ( 'NONE', *, *, #743, .T. ) ; +#1593 = ORIENTED_EDGE ( 'NONE', *, *, #1282, .T. ) ; +#1594 = EDGE_CURVE ( 'NONE', #1396, #1078, #896, .T. ) ; +#1595 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999300, -14.99999999999999800, -6.250000000000005300 ) ) ; +#1596 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.224646799147353200E-016, 1.911981197034690600E-032 ) ) ; +#1597 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1598 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1599 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1600 = FACE_OUTER_BOUND ( 'NONE', #1679, .T. ) ; +#1601 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 19.99999999999999600, -11.25000000000000400 ) ) ; +#1602 = EDGE_CURVE ( 'NONE', #1343, #181, #1305, .T. ) ; +#1603 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#1604 = EDGE_LOOP ( 'NONE', ( #964, #1335, #466, #682 ) ) ; +#1605 = CIRCLE ( 'NONE', #532, 10.00000000000000200 ) ; +#1606 = CARTESIAN_POINT ( 'NONE', ( 28.39411254969542900, -9.999999999999998200, -8.700000000000002800 ) ) ; +#1607 = AXIS2_PLACEMENT_3D ( 'NONE', #1249, #1098, #334 ) ; +#1608 = VERTEX_POINT ( 'NONE', #1044 ) ; +#1609 = APPROVAL_DATE_TIME ( #45, #59 ) ; +#1610 = ORIENTED_EDGE ( 'NONE', *, *, #989, .T. ) ; +#1611 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 20.00000000000000400, 1.250000000000003800 ) ) ; +#1612 = VECTOR ( 'NONE', #733, 1000.000000000000000 ) ; +#1613 = LINE ( 'NONE', #1837, #1472 ) ; +#1614 = VECTOR ( 'NONE', #781, 1000.000000000000000 ) ; +#1615 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -15.00000000000000000, -6.250000000000005300 ) ) ; +#1616 = ORIENTED_EDGE ( 'NONE', *, *, #1043, .T. ) ; +#1617 = ORIENTED_EDGE ( 'NONE', *, *, #556, .T. ) ; +#1618 = AXIS2_PLACEMENT_3D ( 'NONE', #1671, #1367, #607 ) ; +#1619 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.999999999999997300, 3.749999999999999600 ) ) ; +#1620 = ORIENTED_EDGE ( 'NONE', *, *, #393, .F. ) ; +#1621 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1622 = EDGE_CURVE ( 'NONE', #1052, #1704, #1251, .T. ) ; +#1623 = EDGE_LOOP ( 'NONE', ( #1347, #1313, #1558, #658 ) ) ; +#1624 = ORIENTED_EDGE ( 'NONE', *, *, #1093, .F. ) ; +#1625 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -4.999999999999998200, -6.249999999999998200 ) ) ; +#1626 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1627 = AXIS2_PLACEMENT_3D ( 'NONE', #1720, #809, #1877 ) ; +#1628 = FACE_OUTER_BOUND ( 'NONE', #1468, .T. ) ; +#1629 = EDGE_LOOP ( 'NONE', ( #1164, #1576, #365, #1546, #158 ) ) ; +#1630 = FACE_BOUND ( 'NONE', #1686, .T. ) ; +#1631 = LINE ( 'NONE', #1944, #157 ) ; +#1632 = LINE ( 'NONE', #1408, #1278 ) ; +#1633 = LINE ( 'NONE', #370, #70 ) ; +#1634 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -2.312964634635743400E-016 ) ) ; +#1635 = ORIENTED_EDGE ( 'NONE', *, *, #1687, .F. ) ; +#1636 = EDGE_LOOP ( 'NONE', ( #1527, #1927, #531, #1172 ) ) ; +#1637 = EDGE_CURVE ( 'NONE', #878, #459, #1653, .T. ) ; +#1638 = ADVANCED_FACE ( 'NONE', ( #801 ), #1964, .T. ) ; +#1639 = AXIS2_PLACEMENT_3D ( 'NONE', #576, #1634, #723 ) ; +#1640 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.00000000000000400, 1.250000000000003800 ) ) ; +#1641 = CYLINDRICAL_SURFACE ( 'NONE', #562, 1.200000000000000600 ) ; +#1642 = CYLINDRICAL_SURFACE ( 'NONE', #1066, 1.200000000000000600 ) ; +#1643 = ADVANCED_FACE ( 'NONE', ( #1199 ), #48, .T. ) ; +#1644 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.541976423090495400E-016 ) ) ; +#1645 = ORIENTED_EDGE ( 'NONE', *, *, #93, .F. ) ; +#1646 = CYLINDRICAL_SURFACE ( 'NONE', #313, 5.000000000000000900 ) ; +#1647 = FACE_OUTER_BOUND ( 'NONE', #1509, .T. ) ; +#1648 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995100, 25.68246346292557200, 18.61208764592457500 ) ) ; +#1649 = ORIENTED_EDGE ( 'NONE', *, *, #989, .F. ) ; +#1650 = EDGE_CURVE ( 'NONE', #1585, #1312, #850, .T. ) ; +#1651 = APPROVAL_PERSON_ORGANIZATION ( #88, #59, #80 ) ; +#1652 = VERTEX_POINT ( 'NONE', #1359 ) ; +#1653 = LINE ( 'NONE', #134, #1612 ) ; +#1654 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1655 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000000, 25.01532197013853300, 18.74999999999999300 ) ) ; +#1656 = LINE ( 'NONE', #616, #401 ) ; +#1657 = ORIENTED_EDGE ( 'NONE', *, *, #2, .F. ) ; +#1658 = LINE ( 'NONE', #769, #1254 ) ; +#1659 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -9.999999999999998200, -6.250000000000001800 ) ) ; +#1660 = ADVANCED_FACE ( 'NONE', ( #399 ), #1923, .F. ) ; +#1661 = ORIENTED_EDGE ( 'NONE', *, *, #1242, .T. ) ; +#1662 = ORIENTED_EDGE ( 'NONE', *, *, #1004, .T. ) ; +#1663 = CARTESIAN_POINT ( 'NONE', ( 28.39411254969542900, 24.99999999999999600, -7.500000000000003600 ) ) ; +#1664 = CARTESIAN_POINT ( 'NONE', ( 27.49999999999999600, 29.64539645059050700, 14.43784772425715900 ) ) ; +#1665 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.561251128379126400E-016, -1.000000000000000000 ) ) ; +#1666 = EDGE_CURVE ( 'NONE', #855, #1123, #748, .T. ) ; +#1667 = ORIENTED_EDGE ( 'NONE', *, *, #1955, .T. ) ; +#1668 = ADVANCED_FACE ( 'NONE', ( #344 ), #1208, .F. ) ; +#1669 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1670 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999998200, -51.40054944640257200, 8.673617379884032500E-016 ) ) ; +#1671 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 25.00000000000000000, -6.249999999999998200 ) ) ; +#1672 = ORIENTED_EDGE ( 'NONE', *, *, #223, .F. ) ; +#1673 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1674 = EDGE_CURVE ( 'NONE', #1112, #1078, #1515, .T. ) ; +#1675 = ORIENTED_EDGE ( 'NONE', *, *, #194, .T. ) ; +#1676 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.156482317317871200E-016 ) ) ; +#1677 = ADVANCED_FACE ( 'NONE', ( #1158 ), #659, .F. ) ; +#1678 = FACE_BOUND ( 'NONE', #681, .T. ) ; +#1679 = EDGE_LOOP ( 'NONE', ( #127, #1198, #1165, #1197 ) ) ; +#1680 = AXIS2_PLACEMENT_3D ( 'NONE', #1739, #1281, #364 ) ; +#1681 = FACE_OUTER_BOUND ( 'NONE', #744, .T. ) ; +#1682 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1683 = VECTOR ( 'NONE', #1703, 1000.000000000000000 ) ; +#1684 = DIRECTION ( 'NONE', ( -1.734723475976808100E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1685 = CIRCLE ( 'NONE', #140, 10.00000000000000200 ) ; +#1686 = EDGE_LOOP ( 'NONE', ( #255, #1816 ) ) ; +#1687 = EDGE_CURVE ( 'NONE', #843, #1141, #1059, .T. ) ; +#1688 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000200, 2.602085213965210600E-015, 6.250000000000000900 ) ) ; +#1689 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999600, 3.750000000000000000 ) ) ; +#1690 = FACE_OUTER_BOUND ( 'NONE', #1267, .T. ) ; +#1691 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.99999999999999600, -8.700000000000002800 ) ) ; +#1692 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1693 = EDGE_CURVE ( 'NONE', #812, #1868, #708, .T. ) ; +#1694 = AXIS2_PLACEMENT_3D ( 'NONE', #716, #1330, #412 ) ; +#1695 = DIRECTION ( 'NONE', ( 6.938893903907233300E-016, 2.312964634635743400E-016, 1.000000000000000000 ) ) ; +#1696 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.561251128379126400E-016, 1.000000000000000000 ) ) ; +#1697 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999300, -9.999999999999998200, -7.500000000000003600 ) ) ; +#1698 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 8.673617379884041600E-017 ) ) ; +#1699 = ORIENTED_EDGE ( 'NONE', *, *, #1178, .F. ) ; +#1700 = CYLINDRICAL_SURFACE ( 'NONE', #215, 10.00000000000000000 ) ; +#1701 = VERTEX_POINT ( 'NONE', #1068 ) ; +#1702 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1703 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1704 = VERTEX_POINT ( 'NONE', #1219 ) ; +#1705 = EDGE_CURVE ( 'NONE', #495, #870, #1820, .T. ) ; +#1706 = CIRCLE ( 'NONE', #435, 5.000000000000000900 ) ; +#1707 = ORIENTED_EDGE ( 'NONE', *, *, #1883, .T. ) ; +#1708 = DIRECTION ( 'NONE', ( 1.067350013832299500E-017, -0.08715574274765820800, -0.9961946980917455500 ) ) ; +#1709 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -51.40054944640257200, 13.75000000000000200 ) ) ; +#1710 = FACE_OUTER_BOUND ( 'NONE', #707, .T. ) ; +#1711 = AXIS2_PLACEMENT_3D ( 'NONE', #799, #951, #50 ) ; +#1712 = ORIENTED_EDGE ( 'NONE', *, *, #1934, .T. ) ; +#1713 = EDGE_LOOP ( 'NONE', ( #58, #16, #425, #1155 ) ) ; +#1714 = PLANE ( 'NONE', #1711 ) ; +#1715 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 19.99999999999999600, 18.75000000000000000 ) ) ; +#1716 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1717 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999800, 7.500000000000003600, 8.750000000000000000 ) ) ; +#1718 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, 28.66025403784437500, 13.75000000000000200 ) ) ; +#1719 = VERTEX_POINT ( 'NONE', #621 ) ; +#1720 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, -4.999999999999994700, 13.74999999999999800 ) ) ; +#1721 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1722 = AXIS2_PLACEMENT_3D ( 'NONE', #1387, #475, #1535 ) ; +#1723 = AXIS2_PLACEMENT_3D ( 'NONE', #1748, #1742, #1598 ) ; +#1724 = CARTESIAN_POINT ( 'NONE', ( -10.00000000000000000, -4.999999999999995600, 13.74999999999999800 ) ) ; +#1725 = ORIENTED_EDGE ( 'NONE', *, *, #689, .F. ) ; +#1726 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, -51.40054944640257200, 8.750000000000000000 ) ) ; +#1727 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.349229370204183400E-016, -9.540486298584920700E-032 ) ) ; +#1728 = ORIENTED_EDGE ( 'NONE', *, *, #1594, .F. ) ; +#1729 = VECTOR ( 'NONE', #324, 1000.000000000000000 ) ; +#1730 = ORIENTED_EDGE ( 'NONE', *, *, #1874, .T. ) ; +#1731 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999996400, 28.66025403784437500, 8.750000000000000000 ) ) ; +#1732 = VECTOR ( 'NONE', #1738, 1000.000000000000000 ) ; +#1733 = VECTOR ( 'NONE', #906, 1000.000000000000000 ) ; +#1734 = EDGE_CURVE ( 'NONE', #416, #418, #1109, .T. ) ; +#1735 = FACE_OUTER_BOUND ( 'NONE', #1496, .T. ) ; +#1736 = ORIENTED_EDGE ( 'NONE', *, *, #913, .F. ) ; +#1737 = EDGE_LOOP ( 'NONE', ( #222, #527, #1160, #971, #291 ) ) ; +#1738 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1739 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -1.373322751814975100E-016, 1.250000000000000700 ) ) ; +#1740 = AXIS2_PLACEMENT_3D ( 'NONE', #1253, #43, #184 ) ; +#1741 = VERTEX_POINT ( 'NONE', #929 ) ; +#1742 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1743 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1744 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -1.373322751814975100E-016, 1.250000000000000700 ) ) ; +#1745 = DIRECTION ( 'NONE', ( 6.419766481290786900E-032, -2.312964634635743000E-016, -1.000000000000000000 ) ) ; +#1746 = LINE ( 'NONE', #803, #330 ) ; +#1747 = EDGE_CURVE ( 'NONE', #1002, #946, #1471, .T. ) ; +#1748 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1749 = PLANE ( 'NONE', #954 ) ; +#1750 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.445602896647339700E-016, 1.000000000000000000 ) ) ; +#1751 = AXIS2_PLACEMENT_3D ( 'NONE', #1185, #274, #1345 ) ; +#1752 = VERTEX_POINT ( 'NONE', #309 ) ; +#1753 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#1754 = ORIENTED_EDGE ( 'NONE', *, *, #1237, .T. ) ; +#1755 = EDGE_LOOP ( 'NONE', ( #82, #1405 ) ) ; +#1756 = PLANE ( 'NONE', #880 ) ; +#1757 = FACE_OUTER_BOUND ( 'NONE', #339, .T. ) ; +#1758 = CIRCLE ( 'NONE', #1021, 1.199999999999999700 ) ; +#1759 = DATE_TIME_ROLE ( 'classification_date' ) ; +#1760 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 24.99999999999999600, -11.25000000000000500 ) ) ; +#1761 = ORIENTED_EDGE ( 'NONE', *, *, #1687, .T. ) ; +#1762 = ORIENTED_EDGE ( 'NONE', *, *, #574, .T. ) ; +#1763 = EDGE_CURVE ( 'NONE', #561, #1394, #1012, .T. ) ; +#1764 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1765 = AXIS2_PLACEMENT_3D ( 'NONE', #1552, #644, #1702 ) ; +#1766 = DIRECTION ( 'NONE', ( 1.349229370204183400E-016, 1.000000000000000000, 1.445602896647339700E-016 ) ) ; +#1767 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1768 = VERTEX_POINT ( 'NONE', #18 ) ; +#1769 = EDGE_CURVE ( 'NONE', #1328, #1873, #294, .T. ) ; +#1770 = CIRCLE ( 'NONE', #1914, 1.199999999999999700 ) ; +#1771 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1772 = AXIS2_PLACEMENT_3D ( 'NONE', #142, #1203, #290 ) ; +#1773 = VERTEX_POINT ( 'NONE', #1688 ) ; +#1774 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#1775 = ORIENTED_EDGE ( 'NONE', *, *, #608, .T. ) ; +#1776 = LINE ( 'NONE', #27, #609 ) ; +#1777 = VECTOR ( 'NONE', #28, 1000.000000000000000 ) ; +#1778 = ORIENTED_EDGE ( 'NONE', *, *, #879, .T. ) ; +#1779 = CIRCLE ( 'NONE', #69, 5.000000000000000900 ) ; +#1780 = PLANE ( 'NONE', #1694 ) ; +#1781 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1782 = FACE_BOUND ( 'NONE', #730, .T. ) ; +#1783 = VERTEX_POINT ( 'NONE', #1081 ) ; +#1784 = EDGE_LOOP ( 'NONE', ( #1928, #900, #1033, #147 ) ) ; +#1785 = EDGE_CURVE ( 'NONE', #1063, #1947, #1776, .T. ) ; +#1786 = AXIS2_PLACEMENT_3D ( 'NONE', #537, #1596, #684 ) ; +#1787 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -6.938893903907233300E-016 ) ) ; +#1788 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1789 = CIRCLE ( 'NONE', #1722, 1.200000000000000600 ) ; +#1790 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -4.999999999999997300, 3.750000000000000000 ) ) ; +#1791 = EDGE_CURVE ( 'NONE', #1855, #1444, #565, .T. ) ; +#1792 = EDGE_CURVE ( 'NONE', #139, #1101, #154, .T. ) ; +#1793 = ORIENTED_EDGE ( 'NONE', *, *, #93, .T. ) ; +#1794 = CIRCLE ( 'NONE', #1383, 5.000000000000000900 ) ; +#1795 = ORIENTED_EDGE ( 'NONE', *, *, #1769, .T. ) ; +#1796 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.999999999999998200, -6.250000000000001800 ) ) ; +#1797 = VERTEX_POINT ( 'NONE', #1852 ) ; +#1798 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995600, 29.12088796977395000, 16.04063760252668300 ) ) ; +#1799 = ADVANCED_FACE ( 'NONE', ( #519 ), #1272, .T. ) ; +#1800 = FACE_OUTER_BOUND ( 'NONE', #555, .T. ) ; +#1801 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #77, 'distance_accuracy_value', 'NONE'); +#1802 = VECTOR ( 'NONE', #1028, 1000.000000000000000 ) ; +#1803 = LINE ( 'NONE', #1366, #945 ) ; +#1804 = ORIENTED_EDGE ( 'NONE', *, *, #1156, .F. ) ; +#1805 = VERTEX_POINT ( 'NONE', #174 ) ; +#1806 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999994700, 24.67246950851992400, 18.74999999999999600 ) ) ; +#1807 = EDGE_CURVE ( 'NONE', #1971, #1054, #109, .T. ) ; +#1808 = AXIS2_PLACEMENT_3D ( 'NONE', #342, #188, #1865 ) ; +#1809 = ADVANCED_FACE ( 'NONE', ( #1678, #1372 ), #1091, .F. ) ; +#1810 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 0.0000000000000000000, 13.74999999999999800 ) ) ; +#1811 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000700, 25.68261659659775400, 18.64544505577031300 ) ) ; +#1812 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1813 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000000, 29.68245836551854200, 13.75000000000000400 ) ) ; +#1814 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.99999999999999600, -7.500000000000003600 ) ) ; +#1815 = ADVANCED_FACE ( 'NONE', ( #1327 ), #1222, .F. ) ; +#1816 = ORIENTED_EDGE ( 'NONE', *, *, #913, .T. ) ; +#1817 = AXIS2_PLACEMENT_3D ( 'NONE', #770, #1838, #931 ) ; +#1818 = DATE_AND_TIME ( #247, #657 ) ; +#1819 = EDGE_LOOP ( 'NONE', ( #1620, #1220, #25, #303 ) ) ; +#1820 = LINE ( 'NONE', #615, #1418 ) ; +#1821 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.312964634635743400E-016, 1.000000000000000000 ) ) ; +#1822 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 3.750000000000000000 ) ) ; +#1823 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #493, #1753, ( #79 ) ) ; +#1824 = ORIENTED_EDGE ( 'NONE', *, *, #1403, .F. ) ; +#1825 = VECTOR ( 'NONE', #655, 1000.000000000000000 ) ; +#1826 = DIRECTION ( 'NONE', ( 1.734723475976807100E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1827 = ORIENTED_EDGE ( 'NONE', *, *, #2, .T. ) ; +#1828 = VERTEX_POINT ( 'NONE', #1400 ) ; +#1829 = ADVANCED_FACE ( 'NONE', ( #1628 ), #417, .T. ) ; +#1830 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.99999999999999600, -7.500000000000003600 ) ) ; +#1831 = PLANE ( 'NONE', #695 ) ; +#1832 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.561251128379126400E-016, 1.000000000000000000 ) ) ; +#1833 = EDGE_CURVE ( 'NONE', #1325, #1453, #468, .T. ) ; +#1834 = AXIS2_PLACEMENT_3D ( 'NONE', #1117, #197, #1264 ) ; +#1835 = CIRCLE ( 'NONE', #1412, 5.000000000000000900 ) ; +#1836 = DIRECTION ( 'NONE', ( 6.427081905795091100E-032, -2.308220447633426100E-016, -1.000000000000000000 ) ) ; +#1837 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 30.00000000000001400, 43.68416490252569400 ) ) ; +#1838 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1839 = ORIENTED_EDGE ( 'NONE', *, *, #978, .T. ) ; +#1840 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 2.308220447633426100E-016, 1.000000000000000000 ) ) ; +#1841 = FACE_OUTER_BOUND ( 'NONE', #1819, .T. ) ; +#1842 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1843 = EDGE_CURVE ( 'NONE', #1009, #416, #66, .T. ) ; +#1844 = ORIENTED_EDGE ( 'NONE', *, *, #30, .F. ) ; +#1845 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 20.00000000000000400, 1.250000000000003800 ) ) ; +#1846 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 30.00000000000001400, -3.749999999999996400 ) ) ; +#1847 = FACE_OUTER_BOUND ( 'NONE', #1151, .T. ) ; +#1848 = ORIENTED_EDGE ( 'NONE', *, *, #407, .F. ) ; +#1849 = ORIENTED_EDGE ( 'NONE', *, *, #1317, .T. ) ; +#1850 = AXIS2_PLACEMENT_3D ( 'NONE', #135, #1190, #280 ) ; +#1851 = VECTOR ( 'NONE', #860, 1000.000000000000000 ) ; +#1852 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 20.00000000000000400, -3.749999999999996400 ) ) ; +#1853 = PLANE ( 'NONE', #1407 ) ; +#1854 = CIRCLE ( 'NONE', #1573, 1.199999999999999700 ) ; +#1855 = VERTEX_POINT ( 'NONE', #798 ) ; +#1856 = ORIENTED_EDGE ( 'NONE', *, *, #1650, .F. ) ; +#1857 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1858 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1859 = DIRECTION ( 'NONE', ( 1.541976423090495600E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1860 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 9.343835023555572100, 8.750000000000000000 ) ) ; +#1861 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.561251128379126400E-016, 1.000000000000000000 ) ) ; +#1862 = EDGE_CURVE ( 'NONE', #1205, #1473, #822, .T. ) ; +#1863 = AXIS2_PLACEMENT_3D ( 'NONE', #767, #937, #167 ) ; +#1864 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996900, -7.500000000000000000, -9.937201396563589700E-015 ) ) ; +#1865 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1866 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.999999999999994700, 13.74999999999999800 ) ) ; +#1867 = CARTESIAN_POINT ( 'NONE', ( 28.39411254969542900, -9.999999999999998200, -7.500000000000003600 ) ) ; +#1868 = VERTEX_POINT ( 'NONE', #647 ) ; +#1869 = CIRCLE ( 'NONE', #932, 10.00000000000000000 ) ; +#1870 = ORIENTED_EDGE ( 'NONE', *, *, #1346, .T. ) ; +#1871 = PERSON_AND_ORGANIZATION ( #696, #892 ) ; +#1872 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1873 = VERTEX_POINT ( 'NONE', #507 ) ; +#1874 = EDGE_CURVE ( 'NONE', #1704, #893, #17, .T. ) ; +#1875 = VECTOR ( 'NONE', #1373, 1000.000000000000000 ) ; +#1876 = ORIENTED_EDGE ( 'NONE', *, *, #836, .T. ) ; +#1877 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1878 = CIRCLE ( 'NONE', #1627, 5.000000000000000900 ) ; +#1879 = AXIS2_PLACEMENT_3D ( 'NONE', #1193, #1505, #595 ) ; +#1880 = EDGE_LOOP ( 'NONE', ( #293, #927, #692, #316 ) ) ; +#1881 = ORIENTED_EDGE ( 'NONE', *, *, #41, .F. ) ; +#1882 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 30.00000000000000000, -3.749999999999995100 ) ) ; +#1883 = EDGE_CURVE ( 'NONE', #1071, #1941, #1175, .T. ) ; +#1884 = CARTESIAN_POINT ( 'NONE', ( -10.00000000000000000, 19.99999999999999600, 3.750000000000000000 ) ) ; +#1885 = EDGE_LOOP ( 'NONE', ( #1116, #489, #554, #1517 ) ) ; +#1886 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995100, -7.499999999999994700, 18.75000000000000000 ) ) ; +#1887 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.541976423090495600E-016, -9.986303415341224300E-032 ) ) ; +#1888 = AXIS2_PLACEMENT_3D ( 'NONE', #829, #980, #75 ) ; +#1889 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1890 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 3.750000000000000000 ) ) ; +#1891 = ORIENTED_EDGE ( 'NONE', *, *, #904, .F. ) ; +#1892 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.561251128379126400E-016 ) ) ; +#1893 = PLANE ( 'NONE', #1888 ) ; +#1894 = EDGE_LOOP ( 'NONE', ( #151, #1361, #986, #709 ) ) ; +#1895 = EDGE_CURVE ( 'NONE', #591, #1652, #1940, .T. ) ; +#1896 = VECTOR ( 'NONE', #369, 1000.000000000000000 ) ; +#1897 = ORIENTED_EDGE ( 'NONE', *, *, #941, .F. ) ; +#1898 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, 0.0000000000000000000, 13.74999999999999800 ) ) ; +#1899 = CIRCLE ( 'NONE', #981, 5.000000000000003600 ) ; +#1900 = EDGE_CURVE ( 'NONE', #1538, #1002, #772, .T. ) ; +#1901 = FACE_OUTER_BOUND ( 'NONE', #928, .T. ) ; +#1902 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1903 = AXIS2_PLACEMENT_3D ( 'NONE', #572, #1787, #873 ) ; +#1904 = ORIENTED_EDGE ( 'NONE', *, *, #1143, .T. ) ; +#1905 = ORIENTED_EDGE ( 'NONE', *, *, #1577, .T. ) ; +#1906 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #838 ) ; +#1907 = LINE ( 'NONE', #1075, #1503 ) ; +#1908 = EDGE_CURVE ( 'NONE', #807, #1112, #1584, .T. ) ; +#1909 = APPROVAL_ROLE ( '' ) ; +#1910 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 25.00000000000000000, -6.249999999999998200 ) ) ; +#1911 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000000, 29.68245836551854200, 13.75000000000000400 ) ) ; +#1912 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.999999999999998200, -8.700000000000002800 ) ) ; +#1913 = MANIFOLD_SOLID_BREP ( 'Fillet8', #498 ) ; +#1914 = AXIS2_PLACEMENT_3D ( 'NONE', #351, #1416, #512 ) ; +#1915 = ORIENTED_EDGE ( 'NONE', *, *, #485, .F. ) ; +#1916 = FACE_OUTER_BOUND ( 'NONE', #256, .T. ) ; +#1917 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995600, 29.39792353561514200, 15.42069925444162600 ) ) ; +#1918 = ORIENTED_EDGE ( 'NONE', *, *, #528, .T. ) ; +#1919 = LOCAL_TIME ( 17, 41, 56.00000000000000000, #340 ) ; +#1920 = VERTEX_POINT ( 'NONE', #1119 ) ; +#1921 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 5.656164976444434200, 8.750000000000000000 ) ) ; +#1922 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, 30.00000000000000000, 18.75000000000000000 ) ) ; +#1923 = CYLINDRICAL_SURFACE ( 'NONE', #1149, 1.200000000000000600 ) ; +#1924 = FACE_OUTER_BOUND ( 'NONE', #1204, .T. ) ; +#1925 = ORIENTED_EDGE ( 'NONE', *, *, #1602, .T. ) ; +#1926 = CIRCLE ( 'NONE', #1217, 12.50000000000000000 ) ; +#1927 = ORIENTED_EDGE ( 'NONE', *, *, #1016, .T. ) ; +#1928 = ORIENTED_EDGE ( 'NONE', *, *, #720, .F. ) ; +#1929 = AXIS2_PLACEMENT_3D ( 'NONE', #166, #1232, #318 ) ; +#1930 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1931 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #464, #1183 ) ; +#1932 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1933 = EDGE_LOOP ( 'NONE', ( #1730, #1336, #818 ) ) ; +#1934 = EDGE_CURVE ( 'NONE', #444, #630, #319, .T. ) ; +#1935 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -4.999999999999998200, -11.25000000000000000 ) ) ; +#1936 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -4.999999999999998200, -11.25000000000000000 ) ) ; +#1937 = AXIS2_PLACEMENT_3D ( 'NONE', #1428, #521, #1579 ) ; +#1938 = VERTEX_POINT ( 'NONE', #192 ) ; +#1939 = ORIENTED_EDGE ( 'NONE', *, *, #1188, .T. ) ; +#1940 = LINE ( 'NONE', #1415, #1539 ) ; +#1941 = VERTEX_POINT ( 'NONE', #669 ) ; +#1942 = LINE ( 'NONE', #698, #1542 ) ; +#1943 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -15.00000000000000000, -6.249999999999996400 ) ) ; +#1944 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.00000000000000400, 1.250000000000003800 ) ) ; +#1945 = LINE ( 'NONE', #1611, #1087 ) ; +#1946 = EDGE_CURVE ( 'NONE', #418, #1608, #1133, .T. ) ; +#1947 = VERTEX_POINT ( 'NONE', #204 ) ; +#1948 = VERTEX_POINT ( 'NONE', #973 ) ; +#1949 = ADVANCED_FACE ( 'NONE', ( #1847 ), #1443, .T. ) ; +#1950 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1951 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1952 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999996000, 28.65156605932184100, 16.74738723567004700 ) ) ; +#1953 = CIRCLE ( 'NONE', #1270, 4.999999999999997300 ) ; +#1954 = ADVANCED_FACE ( 'NONE', ( #1080 ), #673, .F. ) ; +#1955 = EDGE_CURVE ( 'NONE', #1768, #139, #1032, .T. ) ; +#1956 = EDGE_LOOP ( 'NONE', ( #1485, #1382, #296, #704 ) ) ; +#1957 = CIRCLE ( 'NONE', #626, 5.000000000000000900 ) ; +#1958 = VERTEX_POINT ( 'NONE', #1130 ) ; +#1959 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000700, 27.55554871526055600, 17.83724578339786900 ) ) ; +#1960 = AXIS2_PLACEMENT_3D ( 'NONE', #1257, #341, #1410 ) ; +#1961 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#1962 = ORIENTED_EDGE ( 'NONE', *, *, #1577, .F. ) ; +#1963 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1964 = CYLINDRICAL_SURFACE ( 'NONE', #842, 5.000000000000000900 ) ; +#1965 = FACE_OUTER_BOUND ( 'NONE', #766, .T. ) ; +#1966 = VECTOR ( 'NONE', #1567, 1000.000000000000000 ) ; +#1967 = FACE_OUTER_BOUND ( 'NONE', #1442, .T. ) ; +#1968 = ADVANCED_FACE ( 'NONE', ( #267, #633 ), #533, .T. ) ; +#1969 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1970 = ORIENTED_EDGE ( 'NONE', *, *, #1051, .T. ) ; +#1971 = VERTEX_POINT ( 'NONE', #1436 ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STEP/Hammer_Slide.step b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Hammer_Slide.step new file mode 100644 index 0000000..eb79f7a --- /dev/null +++ b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Hammer_Slide.step @@ -0,0 +1,4975 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Hammer_Slide.STEP', + '2013-11-10T07:46:53', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = CARTESIAN_POINT ( 'NONE', ( 14.21572941021854900, -8.460904434018122100, 18.85664821965721300 ) ) ; +#2 = VERTEX_POINT ( 'NONE', #2678 ) ; +#3 = LINE ( 'NONE', #1164, #3071 ) ; +#4 = EDGE_CURVE ( 'NONE', #2047, #918, #855, .T. ) ; +#5 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6 = CARTESIAN_POINT ( 'NONE', ( 14.65244130234482100, -10.00000000000000000, 17.41257339466406900 ) ) ; +#7 = VECTOR ( 'NONE', #3252, 1000.000000000000100 ) ; +#8 = VECTOR ( 'NONE', #3614, 1000.000000000000000 ) ; +#9 = CARTESIAN_POINT ( 'NONE', ( 7.995205200902991500, 23.85418733901219200, -58.35503958355255300 ) ) ; +#10 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000000300, 10.00000000000000200, 14.27124344467704900 ) ) ; +#11 = CARTESIAN_POINT ( 'NONE', ( 23.97750072456160800, -8.982932001462311100, 15.63597347400840600 ) ) ; +#12 = EDGE_CURVE ( 'NONE', #1416, #3228, #832, .T. ) ; +#13 = CARTESIAN_POINT ( 'NONE', ( 6.847707340866602300, 10.00000000000000000, 14.04390058874876600 ) ) ; +#14 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -4.014749828072296200, 13.61697764103997200 ) ) ; +#15 = CARTESIAN_POINT ( 'NONE', ( 6.244727428170225600, 10.00000000000000000, 13.82282299581314800 ) ) ; +#16 = FACE_BOUND ( 'NONE', #3780, .T. ) ; +#17 = CARTESIAN_POINT ( 'NONE', ( 10.68267058979122200, 8.460904434014365100, 18.85664821966288700 ) ) ; +#18 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -3.352374761227873800, 13.74554739451340700 ) ) ; +#19 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -4.014749828072297100, 13.61697764103997300 ) ) ; +#20 = EDGE_LOOP ( 'NONE', ( #1238, #1614, #1331, #961, #903, #1683, #1690 ) ) ; +#21 = CIRCLE ( 'NONE', #189, 5.000000000000000000 ) ; +#22 = CARTESIAN_POINT ( 'NONE', ( 19.42505848392094600, 0.9910615894320244900, -28.40301023840735100 ) ) ; +#23 = ORIENTED_EDGE ( 'NONE', *, *, #158, .F. ) ; +#24 = VECTOR ( 'NONE', #1978, 1000.000000000000000 ) ; +#25 = CARTESIAN_POINT ( 'NONE', ( 9.077561436100131300, -9.999999999999998200, 14.78404628562357500 ) ) ; +#26 = CARTESIAN_POINT ( 'NONE', ( 5.834821722338493700, 24.01142209705481900, -59.79133915250320500 ) ) ; +#27 = LINE ( 'NONE', #2024, #24 ) ; +#28 = CARTESIAN_POINT ( 'NONE', ( 18.95285637622533100, -2.836973682200068400, 20.42893218573699300 ) ) ; +#29 = CARTESIAN_POINT ( 'NONE', ( 10.97824477927395700, 10.00000000000000200, 17.41044999498383900 ) ) ; +#30 = EDGE_CURVE ( 'NONE', #1270, #1658, #837, .T. ) ; +#31 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000600, -2.686513312147276600, 13.83649825315998600 ) ) ; +#32 = CIRCLE ( 'NONE', #196, 5.000000000000000000 ) ; +#33 = CARTESIAN_POINT ( 'NONE', ( 22.44919999999999800, -10.00000000000000500, 27.50000000000000400 ) ) ; +#34 = DIRECTION ( 'NONE', ( 0.7071067811865433500, 8.659560562354882300E-017, -0.7071067811865517900 ) ) ; +#35 = CIRCLE ( 'NONE', #3363, 7.500000000000002700 ) ; +#36 = CARTESIAN_POINT ( 'NONE', ( 5.029209663089625700, 10.00000000000000000, 13.42093196348149900 ) ) ; +#37 = EDGE_CURVE ( 'NONE', #1734, #3142, #2059, .T. ) ; +#38 = CARTESIAN_POINT ( 'NONE', ( 18.34648555471835600, 7.076541755999651100, 18.78464941532619300 ) ) ; +#40 = CARTESIAN_POINT ( 'NONE', ( 3.071041120679494500, 5.814505664802991800, 17.98964982365004400 ) ) ; +#39 = CIRCLE ( 'NONE', #1495, 10.00000000000000200 ) ; +#41 = CARTESIAN_POINT ( 'NONE', ( 21.51061048257420100, 0.5602536773445496700, -27.54367982132683300 ) ) ; +#42 = CARTESIAN_POINT ( 'NONE', ( 24.22062174190389400, 10.00000000000000200, 17.31375120601794700 ) ) ; +#43 = FACE_OUTER_BOUND ( 'NONE', #3472, .T. ) ; +#44 = CARTESIAN_POINT ( 'NONE', ( 11.40526348943795500, 10.00000000000000200, 15.32111431373016700 ) ) ; +#45 = CIRCLE ( 'NONE', #449, 2.500000000000000000 ) ; +#46 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -1.349243080713559600, 13.95854292300052200 ) ) ; +#47 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 24.01142209705481900, -59.79133915250322700 ) ) ; +#48 = VECTOR ( 'NONE', #2710, 1000.000000000000000 ) ; +#49 = CARTESIAN_POINT ( 'NONE', ( 11.25582076843110700, 8.508624297245829000, 18.92707615781680300 ) ) ; +#50 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -0.6777701459013250100, 13.98894451387873900 ) ) ; +#51 = CARTESIAN_POINT ( 'NONE', ( 4.416762214261062500, 9.999999999999998200, 13.23973768650285600 ) ) ; +#52 = CARTESIAN_POINT ( 'NONE', ( 8.988294006852061800, 8.020075811982339400, 18.89331625542999400 ) ) ; +#53 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#54 = CARTESIAN_POINT ( 'NONE', ( 6.199200000000002900, 10.00000000000000000, 17.57843258350778400 ) ) ; +#55 = CARTESIAN_POINT ( 'NONE', ( 2.560234527660611100, 10.00000000000000000, 12.77697577569401900 ) ) ; +#56 = AXIS2_PLACEMENT_3D ( 'NONE', #768, #825, #745 ) ; +#57 = CARTESIAN_POINT ( 'NONE', ( 11.45904684047718200, 9.999999999999087000, 17.46893999350682900 ) ) ; +#58 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 0.6707912320150841700, 13.98915502348296200 ) ) ; +#59 = CARTESIAN_POINT ( 'NONE', ( 22.36819599384032700, -9.999999999999998200, 12.77086699763030000 ) ) ; +#60 = EDGE_CURVE ( 'NONE', #2458, #3142, #821, .T. ) ; +#61 = CARTESIAN_POINT ( 'NONE', ( 11.75004087465476800, 10.00000000000000200, 15.39157996722209500 ) ) ; +#62 = CARTESIAN_POINT ( 'NONE', ( 24.89839999999999900, 1.345197808628219200, 13.95883896360964500 ) ) ; +#63 = VECTOR ( 'NONE', #2069, 1000.000000000000100 ) ; +#64 = CARTESIAN_POINT ( 'NONE', ( 1.295997578428325300, 10.00000000000000200, 12.57590347057598400 ) ) ; +#65 = CARTESIAN_POINT ( 'NONE', ( 18.10908475242833800, 13.21622010239348900, -19.49407087209497300 ) ) ; +#66 = ORIENTED_EDGE ( 'NONE', *, *, #438, .T. ) ; +#67 = CARTESIAN_POINT ( 'NONE', ( 18.86741909521720100, 24.08708676271306700, -60.07372352907746900 ) ) ; +#68 = CIRCLE ( 'NONE', #1372, 5.000000000000000000 ) ; +#69 = CARTESIAN_POINT ( 'NONE', ( 11.85815484511193900, 8.535673796040807600, 18.96466392848421000 ) ) ; +#70 = FACE_BOUND ( 'NONE', #335, .T. ) ; +#71 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000600, 2.685872851298056300, 13.83662959620666700 ) ) ; +#72 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2268, #399, #306 ), + ( #3461, #1097, #2967 ), + ( #3815, #2988, #3521 ), + ( #864, #2135, #2294 ), + ( #25, #2857, #1634 ), + ( #260, #1424, #1757 ), + ( #2089, #3594, #3283 ), + ( #608, #2412, #1185 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( -6.288372600415925700E-018, 0.001023250555039225800, 0.002046501110078457700, 0.004093002220156921400 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8164965809277265900, 1.000000000000000000), + ( 1.000000000000000000, 0.8335262052137715200, 1.000000000000000000), + ( 1.000000000000000000, 0.8461836458337513900, 1.000000000000000000), + ( 1.000000000000000000, 0.8674092759744821400, 1.000000000000000000), + ( 1.000000000000000000, 0.8759986957843242100, 1.000000000000000000), + ( 1.000000000000000000, 0.8987980930245169600, 1.000000000000000000), + ( 1.000000000000000000, 0.9099784173015017500, 1.000000000000000000), + ( 1.000000000000000000, 0.9198317473328681000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#73 = CARTESIAN_POINT ( 'NONE', ( 19.11586666666666500, -6.666666666666667900, 18.68082896311803500 ) ) ; +#74 = ADVANCED_FACE ( 'NONE', ( #794 ), #813, .T. ) ; +#75 = ORIENTED_EDGE ( 'NONE', *, *, #253, .F. ) ; +#76 = CARTESIAN_POINT ( 'NONE', ( 11.95956616317768400, 10.00000000000000000, 17.50016388976448000 ) ) ; +#77 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000100, -1.505759517047178300, -23.64527242200713200 ) ) ; +#78 = FACE_OUTER_BOUND ( 'NONE', #2256, .T. ) ; +#79 = CARTESIAN_POINT ( 'NONE', ( 14.15415824272018200, 23.62236945596303900, -64.01569684127720400 ) ) ; +#80 = AXIS2_PLACEMENT_3D ( 'NONE', #3725, #3717, #3713 ) ; +#81 = CIRCLE ( 'NONE', #3432, 5.000000000000001800 ) ; +#82 = CIRCLE ( 'NONE', #3399, 7.500000000000003600 ) ; +#83 = CARTESIAN_POINT ( 'NONE', ( 18.67379999999996400, 3.354751084655892300, 20.42893218813456700 ) ) ; +#84 = CARTESIAN_POINT ( 'NONE', ( 12.10297369130592800, 10.00000000000000200, 15.42913002220648400 ) ) ; +#85 = EDGE_CURVE ( 'NONE', #3142, #2, #3802, .T. ) ; +#86 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9119037906607175800, -0.4104040406460618400 ) ) ; +#87 = DIRECTION ( 'NONE', ( 1.060000827627150900E-016, -1.588080900582084500E-016, -1.000000000000000000 ) ) ; +#88 = CIRCLE ( 'NONE', #3420, 2.500000000000000000 ) ; +#89 = CIRCLE ( 'NONE', #2836, 7.499999999999995600 ) ; +#90 = CARTESIAN_POINT ( 'NONE', ( 13.04995968407800600, 8.535392870899553200, 18.96426664048128400 ) ) ; +#91 = DIRECTION ( 'NONE', ( 8.223914041195075600E-016, -0.4104040406460617900, 0.9119037906607175800 ) ) ; +#92 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 10.00000000000000200, 12.51759777210976300 ) ) ; +#93 = EDGE_CURVE ( 'NONE', #2737, #1362, #787, .T. ) ; +#94 = CARTESIAN_POINT ( 'NONE', ( 10.06575581967688000, 12.86709432349317900, -18.10888753925034700 ) ) ; +#95 = FACE_OUTER_BOUND ( 'NONE', #2606, .T. ) ; +#96 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.184850993605144000E-016, 7.500000000000000000 ) ) ; +#97 = CARTESIAN_POINT ( 'NONE', ( 9.191299728965372400, 23.93240333543845500, -63.24055130430122800 ) ) ; +#98 = ADVANCED_FACE ( 'NONE', ( #834, #791, #784 ), #2987, .T. ) ; +#99 = TOROIDAL_SURFACE ( 'NONE', #2527, 10.00000000000000400, 2.500000000000000000 ) ; +#100 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#101 = CARTESIAN_POINT ( 'NONE', ( 2.449200000000006000, 4.651280611074643200, -30.32742587825108100 ) ) ; +#102 = CARTESIAN_POINT ( 'NONE', ( 10.14101264767127100, 9.043484976561483500, 18.24659179280779500 ) ) ; +#103 = CARTESIAN_POINT ( 'NONE', ( 12.94688974040812800, 10.00000000000000000, 17.49983476616387900 ) ) ; +#104 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 18.09635858759372700, -61.37627564304205000 ) ) ; +#105 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#106 = AXIS2_PLACEMENT_3D ( 'NONE', #3002, #2694, #2684 ) ; +#107 = CARTESIAN_POINT ( 'NONE', ( 20.61697368560767200, 8.820401246232098200, 17.72212718908488300 ) ) ; +#108 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 16.50000000000000000 ) ) ; +#109 = EDGE_CURVE ( 'NONE', #3510, #3644, #2657, .T. ) ; +#110 = EDGE_CURVE ( 'NONE', #902, #872, #753, .T. ) ; +#111 = CARTESIAN_POINT ( 'NONE', ( 24.89839999999999900, 3.352576051076771700, 13.74550832331712300 ) ) ; +#112 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#113 = CARTESIAN_POINT ( 'NONE', ( 19.49846699601012300, 3.385087845950804000, -27.99374035210687900 ) ) ; +#114 = LINE ( 'NONE', #2317, #63 ) ; +#115 = EDGE_CURVE ( 'NONE', #3228, #1685, #781, .T. ) ; +#116 = CARTESIAN_POINT ( 'NONE', ( 12.80111694852313200, 10.00000000000000200, 15.42873273489357500 ) ) ; +#117 = EDGE_CURVE ( 'NONE', #918, #999, #3465, .T. ) ; +#118 = CARTESIAN_POINT ( 'NONE', ( 19.64624357476915200, 1.268874766163508200, -28.97813429349628200 ) ) ; +#119 = VERTEX_POINT ( 'NONE', #1531 ) ; +#120 = DIRECTION ( 'NONE', ( 1.160899576105062700E-015, 0.2588190451025151300, -0.9659258262890697600 ) ) ; +#121 = FACE_OUTER_BOUND ( 'NONE', #1849, .T. ) ; +#122 = CARTESIAN_POINT ( 'NONE', ( 23.30835455094672400, 8.237020314306850100, 16.54820373758698400 ) ) ; +#123 = EDGE_LOOP ( 'NONE', ( #3828, #3390, #3196, #3778 ) ) ; +#124 = CIRCLE ( 'NONE', #3477, 5.000000000000000000 ) ; +#125 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2524, #2214, #2180 ), + ( #2359, #2474, #2302 ), + ( #2125, #2370, #2350 ), + ( #2309, #2293, #2338 ), + ( #1550, #3721, #1202 ), + ( #2173, #1117, #2109 ), + ( #2104, #1461, #1433 ), + ( #3185, #1318, #1274 ), + ( #3576, #1040, #3539 ), + ( #958, #3814, #3357 ), + ( #1031, #3592, #809 ), + ( #1912, #392, #574 ), + ( #690, #361, #498 ), + ( #476, #431, #1449 ), + ( #427, #148, #28 ), + ( #350, #2199, #2428 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.02721926891903511300, 0.03071446079791519100, 0.03246205673735523500, 0.03420965267679527300, 0.03595724861623531000, 0.03683104658595533200, 0.03770484455567535400, 0.04120003643455542900 ), + ( 0.4779393437612455800, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 0.9620138577402435100, 0.9602604987896410400, 1.000000000000000000), + ( 0.9667287365102290600, 0.9651930062631632900, 1.000000000000000000), + ( 0.9707214600910700800, 0.9693700254110531000, 1.000000000000000000), + ( 0.9749212641755686800, 0.9737636834550291700, 1.000000000000000000), + ( 0.9760244399702957500, 0.9749177794811538800, 1.000000000000000000), + ( 0.9775250483553479300, 0.9764876527345702800, 1.000000000000000000), + ( 0.9779036900715367700, 0.9768837717412300900, 1.000000000000000000), + ( 0.9779061505883706000, 0.9768863458302500200, 1.000000000000000000), + ( 0.9775326427763297900, 0.9764955976977554000, 1.000000000000000000), + ( 0.9764232917779538400, 0.9753350414338100000, 1.000000000000000000), + ( 0.9759598682305299400, 0.9748502272482100200, 1.000000000000000000), + ( 0.9748653479862561300, 0.9737051862942047700, 1.000000000000000000), + ( 0.9742362084816924600, 0.9730470070578894900, 1.000000000000000000), + ( 0.9707192519566199000, 0.9693677153538470300, 1.000000000000000000), + ( 0.9667143840502774300, 0.9651779913244069600, 1.000000000000000000), + ( 0.9620138577402437300, 0.9602604987896410400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#126 = VERTEX_POINT ( 'NONE', #3660 ) ; +#127 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 4.014749828072292600, 13.61697764103997300 ) ) ; +#128 = CARTESIAN_POINT ( 'NONE', ( 21.32942369399698300, 5.960521729848161400, 18.11286642393776700 ) ) ; +#129 = CARTESIAN_POINT ( 'NONE', ( 21.84822266111805400, 0.9188972291233494800, -28.26564313184033800 ) ) ; +#130 = CARTESIAN_POINT ( 'NONE', ( 13.64196508492001000, 8.508675430887997500, 18.92715162289945500 ) ) ; +#131 = FACE_OUTER_BOUND ( 'NONE', #2827, .T. ) ; +#132 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3435, #735, #1646, #3765, #1979, #211, #2287, #497, #2608, #782 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002477179999773852600, 0.004954359999547705200, 0.007431539999321557800, 0.009908719999095410400 ), + .UNSPECIFIED. ) ; +#133 = CARTESIAN_POINT ( 'NONE', ( 19.60604798962629000, 3.546184422918183800, -28.27700725171420300 ) ) ; +#134 = DIRECTION ( 'NONE', ( -0.4744334482306238900, -0.8802913740347567700, -3.936614849225538800E-016 ) ) ; +#135 = CIRCLE ( 'NONE', #3459, 4.999999999999997300 ) ; +#136 = FACE_OUTER_BOUND ( 'NONE', #242, .T. ) ; +#137 = EDGE_CURVE ( 'NONE', #2881, #918, #751, .T. ) ; +#138 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000100, 10.00000000000000200, 14.27124344467704900 ) ) ; +#139 = CARTESIAN_POINT ( 'NONE', ( 21.43401729950728900, 6.081579897082653100, 18.05620270955144200 ) ) ; +#140 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#141 = CARTESIAN_POINT ( 'NONE', ( 13.43885507863448200, 10.00000000000030900, 17.46900058408199300 ) ) ; +#142 = CARTESIAN_POINT ( 'NONE', ( 16.80775964860232100, 10.00000000000000200, 14.51368510905993500 ) ) ; +#143 = DIRECTION ( 'NONE', ( -8.673617379884038400E-016, -0.2588190451025145800, 0.9659258262890698700 ) ) ; +#144 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000100, 1.758564121058934400, -25.31515713847477400 ) ) ; +#145 = CARTESIAN_POINT ( 'NONE', ( 1.232595164407831400E-031, 4.999999999999995600, -1.014004313383126000E-015 ) ) ; +#146 = LINE ( 'NONE', #2891, #3207 ) ; +#147 = EDGE_CURVE ( 'NONE', #2950, #126, #741, .T. ) ; +#148 = CARTESIAN_POINT ( 'NONE', ( 20.18454672099192500, -3.453576491560103700, 19.05214880420036700 ) ) ; +#149 = CARTESIAN_POINT ( 'NONE', ( 16.15137585927487500, 10.00000000000000000, 14.69981776350341100 ) ) ; +#150 = CARTESIAN_POINT ( 'NONE', ( 19.73582437692638100, 1.410208604941900500, -29.27417532835561100 ) ) ; +#151 = CARTESIAN_POINT ( 'NONE', ( 13.14806400865519500, 10.00000000000000200, 15.39164028165632200 ) ) ; +#152 = CARTESIAN_POINT ( 'NONE', ( 13.49313651055454800, 10.00000000000000400, 15.32111431373177100 ) ) ; +#153 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9659258262890700900, -0.2588190451025145200 ) ) ; +#154 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000100, 1.112410224249715600, -25.38722134670420500 ) ) ; +#155 = CARTESIAN_POINT ( 'NONE', ( 3.794503647183623800, -9.999999999999996400, 17.35167560874783300 ) ) ; +#156 = CIRCLE ( 'NONE', #2079, 5.000000000000000900 ) ; +#157 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, 15.34856020936184800, -27.46109844868017500 ) ) ; +#158 = EDGE_CURVE ( 'NONE', #1409, #3311, #234, .T. ) ; +#159 = ORIENTED_EDGE ( 'NONE', *, *, #487, .F. ) ; +#160 = TOROIDAL_SURFACE ( 'NONE', #2620, 14.14213562373095300, 10.00000000000000000 ) ; +#161 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#162 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#163 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#164 = EDGE_CURVE ( 'NONE', #1106, #3644, #775, .T. ) ; +#165 = VERTEX_POINT ( 'NONE', #1557 ) ; +#166 = FACE_OUTER_BOUND ( 'NONE', #3016, .T. ) ; +#167 = CARTESIAN_POINT ( 'NONE', ( 13.49313651056078100, 10.00000000000000200, 15.32111431373042600 ) ) ; +#168 = EDGE_CURVE ( 'NONE', #1547, #2292, #746, .T. ) ; +#169 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.298510400299580000E-032, 1.325001034533938600E-016 ) ) ; +#170 = CARTESIAN_POINT ( 'NONE', ( 21.99166398600240400, 1.102603856714276200, -28.64104685816435100 ) ) ; +#171 = CARTESIAN_POINT ( 'NONE', ( 2.530204006159678900, -9.999999999999998200, 12.77086699763030000 ) ) ; +#172 = ORIENTED_EDGE ( 'NONE', *, *, #1252, .T. ) ; +#173 = CIRCLE ( 'NONE', #3517, 5.000000000000000900 ) ; +#174 = CARTESIAN_POINT ( 'NONE', ( 19.86210558256135900, 4.023986577400769700, -29.13376742292888400 ) ) ; +#175 = CYLINDRICAL_SURFACE ( 'NONE', #3503, 0.5800000000000006300 ) ; +#176 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999995800, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#177 = ORIENTED_EDGE ( 'NONE', *, *, #844, .F. ) ; +#178 = CIRCLE ( 'NONE', #3498, 2.500000000000002200 ) ; +#179 = CARTESIAN_POINT ( 'NONE', ( 14.82922667850506700, 10.00000000000000200, 15.03673185473747700 ) ) ; +#180 = CARTESIAN_POINT ( 'NONE', ( 19.93785811553320600, 1.829776032706375200, -30.16351812766581400 ) ) ; +#181 = CARTESIAN_POINT ( 'NONE', ( 2.449200000000004700, 2.010667195309691700, -30.55163082601315900 ) ) ; +#182 = CIRCLE ( 'NONE', #1677, 4.999999999999997300 ) ; +#183 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#184 = CIRCLE ( 'NONE', #1013, 6.464466094067290700 ) ; +#185 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 22.50000000000003200 ) ) ; +#186 = CARTESIAN_POINT ( 'NONE', ( 21.74529062234266500, 6.442249666512297200, 17.86805059417664800 ) ) ; +#187 = CARTESIAN_POINT ( 'NONE', ( 7.824870719591506200, 13.80881353517583300, -21.74305157635613400 ) ) ; +#188 = DIRECTION ( 'NONE', ( 0.7071067811865479100, 0.7071067811865472400, -2.453269466693396600E-016 ) ) ; +#189 = AXIS2_PLACEMENT_3D ( 'NONE', #1898, #1888, #1883 ) ; +#190 = CARTESIAN_POINT ( 'NONE', ( 22.33307411041378600, 1.648816273553201300, -29.77571325620273200 ) ) ; +#191 = CARTESIAN_POINT ( 'NONE', ( 10.68267058978555200, -8.460904434022083400, 18.85664821965416800 ) ) ; +#192 = CARTESIAN_POINT ( 'NONE', ( 17.76313896677227100, 10.00000000000000400, 17.50071602367481600 ) ) ; +#193 = CARTESIAN_POINT ( 'NONE', ( 14.48169538354919100, -8.202839060351705000, 19.05490808387008500 ) ) ; +#194 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -5.273559366969492800E-015, -1.000000000000000000 ) ) ; +#195 = CARTESIAN_POINT ( 'NONE', ( 4.017164935714697000, 0.04401760543627658600, -26.52958837640733200 ) ) ; +#196 = AXIS2_PLACEMENT_3D ( 'NONE', #1941, #1936, #1929 ) ; +#197 = VERTEX_POINT ( 'NONE', #985 ) ; +#198 = CIRCLE ( 'NONE', #3484, 0.5800000000000006300 ) ; +#199 = CARTESIAN_POINT ( 'NONE', ( 4.673400172733254400, -10.47569949199192000, 17.56023512295524100 ) ) ; +#200 = EDGE_CURVE ( 'NONE', #3644, #3823, #625, .T. ) ; +#201 = ORIENTED_EDGE ( 'NONE', *, *, #2032, .F. ) ; +#202 = CARTESIAN_POINT ( 'NONE', ( -0.04661581392126459100, 10.00000000000000200, 12.51556264434846000 ) ) ; +#203 = FACE_OUTER_BOUND ( 'NONE', #2715, .T. ) ; +#204 = CARTESIAN_POINT ( 'NONE', ( 17.31665112851693800, 7.522862197977421900, 18.85651978935554900 ) ) ; +#205 = CARTESIAN_POINT ( 'NONE', ( 1.084202172485504300E-016, -10.44872086830281800, 17.25550737944266500 ) ) ; +#206 = CARTESIAN_POINT ( 'NONE', ( 13.92015522072427000, 10.00000000000000200, 17.41044999498404500 ) ) ; +#207 = ORIENTED_EDGE ( 'NONE', *, *, #773, .T. ) ; +#208 = VECTOR ( 'NONE', #112, 1000.000000000000000 ) ; +#209 = EDGE_CURVE ( 'NONE', #2453, #2790, #729, .T. ) ; +#210 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#211 = CARTESIAN_POINT ( 'NONE', ( 2.710205103848478900, -0.8310536827525012400, 18.43396647196210500 ) ) ; +#212 = CIRCLE ( 'NONE', #946, 5.000000000000000900 ) ; +#213 = CONICAL_SURFACE ( 'NONE', #1680, 4.999999999999997300, 0.7853981633974423900 ) ; +#214 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.03569824188444000, 12.59035268443285600 ) ) ; +#215 = ORIENTED_EDGE ( 'NONE', *, *, #1717, .F. ) ; +#216 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -88.81885793164890700, -72.39384004447242700 ) ) ; +#217 = CARTESIAN_POINT ( 'NONE', ( 16.92935000744032000, 5.537389203067295500, 20.38692187479076200 ) ) ; +#218 = CARTESIAN_POINT ( 'NONE', ( 4.490311051337127600, -9.663611965802672900, 17.62010025155293400 ) ) ; +#219 = CARTESIAN_POINT ( 'NONE', ( 17.06820883659941000, 11.39987602766558600, -22.38366672243674300 ) ) ; +#220 = CIRCLE ( 'NONE', #2980, 2.500000000000000000 ) ; +#221 = EDGE_CURVE ( 'NONE', #2455, #3183, #736, .T. ) ; +#222 = DIRECTION ( 'NONE', ( -1.301042606982605300E-016, 8.881784197001252300E-015, 1.000000000000000000 ) ) ; +#223 = SHAPE_DEFINITION_REPRESENTATION ( #500, #910 ) ; +#224 = EDGE_CURVE ( 'NONE', #1277, #1686, #705, .T. ) ; +#225 = CARTESIAN_POINT ( 'NONE', ( 19.94919999999999800, 4.339671145761563800, -29.72176410042470700 ) ) ; +#226 = EDGE_CURVE ( 'NONE', #3135, #1270, #737, .T. ) ; +#227 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#228 = DIRECTION ( 'NONE', ( 1.962615573354739000E-015, 0.2588190451025151300, -0.9659258262890697600 ) ) ; +#229 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #277, #385, #269 ), + ( #264, #251, #225 ), + ( #190, #180, #174 ), + ( #170, #150, #133 ), + ( #129, #118, #113 ), + ( #41, #22, #2081 ), + ( #2189, #1940, #1937 ), + ( #1931, #1926, #1921 ), + ( #1918, #1907, #1901 ), + ( #1894, #1889, #1885 ), + ( #1881, #1878, #1870 ), + ( #1865, #1859, #1854 ), + ( #1850, #1841, #1832 ), + ( #1820, #1812, #1799 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.03248127728004318600, 0.03513982119026748400, 0.03646909314537963300, 0.03779836510049178900, 0.03912763705560394500, 0.04045690901071609400, 0.04311545292094039200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865469100, 1.000000000000000000), + ( 1.000000000000000000, 0.7121407007394774400, 1.000000000000000000), + ( 1.000000000000000000, 0.7178127643426045500, 1.000000000000000000), + ( 1.000000000000000000, 0.7270591103844514800, 1.000000000000000000), + ( 1.000000000000000000, 0.7302880985125168600, 1.000000000000000000), + ( 1.000000000000000000, 0.7367881227216752600, 1.000000000000000000), + ( 1.000000000000000000, 0.7400660503196262500, 1.000000000000000000), + ( 1.000000000000000000, 0.7466174459470319400, 1.000000000000000000), + ( 1.000000000000000000, 0.7498910979960710100, 1.000000000000000000), + ( 1.000000000000000000, 0.7563690531121692900, 1.000000000000000000), + ( 1.000000000000000000, 0.7595495973077430700, 1.000000000000000000), + ( 1.000000000000000000, 0.7686201929833033100, 1.000000000000000000), + ( 1.000000000000000000, 0.7741313101779955200, 1.000000000000000000), + ( 1.000000000000000000, 0.7788216141172792400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#230 = CARTESIAN_POINT ( 'NONE', ( 2.442010417195352000E-013, -9.624571084047541800, 17.15856364345253800 ) ) ; +#231 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9659258262890700900, 0.2588190451025143600 ) ) ; +#232 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#233 = CARTESIAN_POINT ( 'NONE', ( 11.86919999999999900, 7.102951435054630400E-017, 16.50000000000000000 ) ) ; +#234 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3087, #1843, #2808, #2794, #397, #2496, #634, #2480, #2439, #1183, #2310, #2913, #1540, #432 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3.786955383950529800E-018, 0.0009729981833468568900, 0.001459497275020283400, 0.001945996366693709900, 0.002918994550040558500, 0.003405493641713982200, 0.003891992733387405900 ), + .UNSPECIFIED. ) ; +#235 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.021910162364536100, 12.68010692637568600 ) ) ; +#236 = FACE_OUTER_BOUND ( 'NONE', #1453, .T. ) ; +#237 = CARTESIAN_POINT ( 'NONE', ( 4.281426314392857300, -8.820401246232428600, 17.72212718908492600 ) ) ; +#238 = CARTESIAN_POINT ( 'NONE', ( 17.40998370824614800, 11.47788851493754700, -22.67481328856048300 ) ) ; +#239 = ORIENTED_EDGE ( 'NONE', *, *, #466, .F. ) ; +#240 = VECTOR ( 'NONE', #162, 1000.000000000000000 ) ; +#241 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#242 = EDGE_LOOP ( 'NONE', ( #3702, #3830, #3748, #3438 ) ) ; +#243 = LINE ( 'NONE', #411, #208 ) ; +#244 = CARTESIAN_POINT ( 'NONE', ( 3.379925071906429800E-013, -8.740062426158438300, 17.09984940044293500 ) ) ; +#245 = EDGE_CURVE ( 'NONE', #3823, #165, #3015, .T. ) ; +#246 = ORIENTED_EDGE ( 'NONE', *, *, #1175, .F. ) ; +#247 = LINE ( 'NONE', #426, #250 ) ; +#248 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#249 = CARTESIAN_POINT ( 'NONE', ( 19.95299950951186600, 10.00000000000055200, 17.44481467049734700 ) ) ; +#250 = VECTOR ( 'NONE', #2019, 1000.000000000000000 ) ; +#251 = CARTESIAN_POINT ( 'NONE', ( 19.98453509005871700, 2.103317520219784700, -30.75749669017476200 ) ) ; +#252 = CARTESIAN_POINT ( 'NONE', ( 22.44919999999999400, 15.34856020936185000, -27.46109844868017500 ) ) ; +#253 = EDGE_CURVE ( 'NONE', #2292, #1409, #2617, .T. ) ; +#254 = CIRCLE ( 'NONE', #3572, 4.999999999999999100 ) ; +#255 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 21.03553390593272000 ) ) ; +#256 = CIRCLE ( 'NONE', #1694, 2.500000000000000400 ) ; +#257 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025143600, 0.9659258262890700900 ) ) ; +#258 = DATE_AND_TIME ( #1023, #2650 ) ; +#259 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.016164268298393100, 12.83319078563422100 ) ) ; +#260 = CARTESIAN_POINT ( 'NONE', ( 10.06917332112918100, -9.999999999999998200, 15.03673185611402000 ) ) ; +#261 = CIRCLE ( 'NONE', #2698, 10.00000000000000200 ) ; +#262 = FACE_OUTER_BOUND ( 'NONE', #1174, .T. ) ; +#263 = CARTESIAN_POINT ( 'NONE', ( 21.32942369399698300, -5.960521729848157000, 18.11286642393776700 ) ) ; +#264 = CARTESIAN_POINT ( 'NONE', ( 22.44919999839644100, 2.011483039069048600, -30.55344360304036000 ) ) ; +#265 = CARTESIAN_POINT ( 'NONE', ( 12.44919999999999800, -11.59115779176003800, -61.56645032909982300 ) ) ; +#266 = LINE ( 'NONE', #319, #1818 ) ; +#267 = CARTESIAN_POINT ( 'NONE', ( 16.14996808566026900, -9.999999999999998200, 14.69451307130714700 ) ) ; +#268 = EDGE_CURVE ( 'NONE', #2146, #165, #660, .T. ) ; +#269 = CARTESIAN_POINT ( 'NONE', ( 19.94919999999999800, 4.651280611074636100, -30.32742587825108400 ) ) ; +#270 = EDGE_CURVE ( 'NONE', #1590, #1378, #657, .T. ) ; +#271 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#272 = CARTESIAN_POINT ( 'NONE', ( 3.820767105335868100, -6.995614750438010200, 17.96934973662124000 ) ) ; +#273 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025144100, 0.9659258262890699800 ) ) ; +#274 = CARTESIAN_POINT ( 'NONE', ( 13.49313651056798800, -9.999999999999998200, 15.32111431372903200 ) ) ; +#275 = CARTESIAN_POINT ( 'NONE', ( 17.14683859900204200, 5.302361400997902800, 20.42893218813457100 ) ) ; +#276 = FACE_OUTER_BOUND ( 'NONE', #1904, .T. ) ; +#277 = CARTESIAN_POINT ( 'NONE', ( 22.44919999999999400, 2.371521134422841300, -31.35343597986624400 ) ) ; +#278 = ORIENTED_EDGE ( 'NONE', *, *, #726, .F. ) ; +#279 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 10.00000000000000200, 12.51759777210976300 ) ) ; +#280 = FACE_OUTER_BOUND ( 'NONE', #3282, .T. ) ; +#281 = CARTESIAN_POINT ( 'NONE', ( -3.249419210214577300E-013, -6.827919535239332500, 17.05260112796723200 ) ) ; +#282 = CARTESIAN_POINT ( 'NONE', ( 14.21572941020667400, 8.460904434014541000, 18.85664821966314300 ) ) ; +#283 = ORIENTED_EDGE ( 'NONE', *, *, #408, .T. ) ; +#284 = VECTOR ( 'NONE', #2530, 1000.000000000000100 ) ; +#285 = EDGE_CURVE ( 'NONE', #165, #1325, #132, .T. ) ; +#286 = DIRECTION ( 'NONE', ( 3.871160330909826300E-016, -1.173781663727935300E-034, 1.000000000000000000 ) ) ; +#287 = CARTESIAN_POINT ( 'NONE', ( 8.734940245509744000, 6.387680343361373600, 20.12007448808817900 ) ) ; +#288 = ORIENTED_EDGE ( 'NONE', *, *, #681, .F. ) ; +#289 = ORIENTED_EDGE ( 'NONE', *, *, #2073, .F. ) ; +#290 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.012797068814975900, 13.20402460292502600 ) ) ; +#291 = EDGE_CURVE ( 'NONE', #3194, #1325, #698, .T. ) ; +#292 = VERTEX_POINT ( 'NONE', #1948 ) ; +#293 = TOROIDAL_SURFACE ( 'NONE', #3541, 14.14213562373095300, 10.00000000000000000 ) ; +#294 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#295 = CARTESIAN_POINT ( 'NONE', ( 3.566351207635779300, -6.013062097049935800, 18.11504713615397900 ) ) ; +#296 = ORIENTED_EDGE ( 'NONE', *, *, #1548, .T. ) ; +#297 = CARTESIAN_POINT ( 'NONE', ( 16.69835821358070800, 11.33223280874085900, -22.12207748753487400 ) ) ; +#298 = FACE_OUTER_BOUND ( 'NONE', #1241, .T. ) ; +#299 = DIRECTION ( 'NONE', ( -1.335906693713116800E-016, -0.2588190451025143600, 0.9659258262890700900 ) ) ; +#300 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.838808320239663900E-032, 1.060000827627150900E-016 ) ) ; +#301 = CARTESIAN_POINT ( 'NONE', ( 18.62350626937538700, 6.945078274142102400, 18.76169400471174200 ) ) ; +#302 = APPROVAL_PERSON_ORGANIZATION ( #714, #650, #1271 ) ; +#303 = CARTESIAN_POINT ( 'NONE', ( 15.52087353075950900, -7.105152569015180200, 19.76776087404739000 ) ) ; +#304 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025146300, 0.9659258262890698700 ) ) ; +#305 = CARTESIAN_POINT ( 'NONE', ( 20.58475036051542500, 6.178701288272034000, 18.29526054258716500 ) ) ; +#306 = CARTESIAN_POINT ( 'NONE', ( 5.782533333333348400, -6.666666666666674100, 18.68082896311803500 ) ) ; +#307 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#308 = CARTESIAN_POINT ( 'NONE', ( 1.462320543593419600E-012, -5.806664120496125600, 17.06281136989816000 ) ) ; +#309 = AXIS2_PLACEMENT_3D ( 'NONE', #2579, #3744, #2231 ) ; +#310 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 1.734723475976807600E-016 ) ) ; +#311 = CARTESIAN_POINT ( 'NONE', ( 18.36732576611076000, 5.918125766110763100, 19.13050627773648700 ) ) ; +#312 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000001200, 1.758564121058930900, -25.31515713847477000 ) ) ; +#313 = EDGE_CURVE ( 'NONE', #1662, #923, #691, .T. ) ; +#314 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -5.015388530223633600, 13.42274950506110700 ) ) ; +#315 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#316 = CARTESIAN_POINT ( 'NONE', ( 4.398336145474921500, 10.00000000000000400, 13.23447473476262600 ) ) ; +#317 = CARTESIAN_POINT ( 'NONE', ( 3.333333333333331700, -4.913000608485465800, 18.24465176069332300 ) ) ; +#318 = VECTOR ( 'NONE', #3155, 1000.000000000000000 ) ; +#319 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 4.999999999999997300, 7.499999999999996400 ) ) ; +#320 = VERTEX_POINT ( 'NONE', #3192 ) ; +#321 = LINE ( 'NONE', #2561, #284 ) ; +#322 = CARTESIAN_POINT ( 'NONE', ( 15.92557350807191700, 11.21830755288877400, -21.67189111135837400 ) ) ; +#323 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.773724697258098900, -46.51193553422098900 ) ) ; +#324 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999998500, -88.81885793164890700, -72.39384004447242700 ) ) ; +#325 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884034500E-016, -4.688437913382172100, 17.08773323077998500 ) ) ; +#326 = ORIENTED_EDGE ( 'NONE', *, *, #117, .F. ) ; +#327 = CARTESIAN_POINT ( 'NONE', ( 9.829675853271609800, 8.255527309635930100, 18.88335498103743900 ) ) ; +#328 = LINE ( 'NONE', #233, #240 ) ; +#329 = CARTESIAN_POINT ( 'NONE', ( 21.32942369399698300, 5.960521729848161400, 18.11286642393776700 ) ) ; +#330 = EDGE_LOOP ( 'NONE', ( #2000, #2005, #2013, #2018, #2041, #2043, #2051, #2055 ) ) ; +#331 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3132, #3172, #3096 ), + ( #3092, #3086, #3082 ), + ( #3068, #3059, #3053 ), + ( #3046, #3042, #3038 ), + ( #3030, #3024, #3017 ), + ( #3012, #2995, #2989 ), + ( #2985, #2981, #2974 ), + ( #2969, #2961, #2955 ), + ( #2947, #2943, #2939 ), + ( #2933, #2926, #2921 ), + ( #2911, #2905, #2902 ), + ( #2897, #2892, #2886 ), + ( #2877, #2871, #2864 ), + ( #2852, #2847, #2837 ), + ( #2831, #2825, #2821 ), + ( #2814, #2809, #2806 ), + ( #2801, #2792, #2786 ), + ( #2773, #2767, #2762 ), + ( #2758, #2747, #2742 ), + ( #2734, #2728, #2712 ), + ( #2706, #2702, #2697 ), + ( #2688, #2680, #2670 ), + ( #2666, #2662, #2658 ), + ( #2652, #2646, #2640 ), + ( #2633, #2627, #2623 ), + ( #2621, #2614, #2605 ), + ( #2591, #2583, #2578 ), + ( #2573, #2566, #2560 ), + ( #2551, #2546, #2536 ), + ( #2529, #2523, #2518 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001821963092897932800, 0.002732944639346899400, 0.003643926185795865700, 0.004554907732244832000, 0.005465889278693798800, 0.006376870825142764600, 0.007287852371591731400, 0.008198833918040698100, 0.009109815464489664000, 0.01002079701093863000, 0.01093177855738759800, 0.01184276010383656300, 0.01275374165028552900, 0.01457570474318346300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865473500, 1.000000000000000000), + ( 1.000000000000000000, 0.6772915413248950000, 1.000000000000000000), + ( 1.000000000000000000, 0.6445454458850576900, 1.000000000000000000), + ( 1.000000000000000000, 0.5939629448191744400, 1.000000000000000000), + ( 1.000000000000000000, 0.5767908629397360300, 1.000000000000000000), + ( 1.000000000000000000, 0.5429432263405340500, 1.000000000000000000), + ( 1.000000000000000000, 0.5263376991091695000, 1.000000000000000000), + ( 1.000000000000000000, 0.4945572982867332300, 1.000000000000000000), + ( 1.000000000000000000, 0.4793791521783176700, 1.000000000000000000), + ( 1.000000000000000000, 0.4515220704858869400, 1.000000000000000000), + ( 1.000000000000000000, 0.4388431758430681500, 1.000000000000000000), + ( 1.000000000000000000, 0.4173988080493439800, 1.000000000000000000), + ( 1.000000000000000000, 0.4086260181192966600, 1.000000000000000000), + ( 1.000000000000000000, 0.3968354681862212900, 1.000000000000000000), + ( 1.000000000000000000, 0.3937730349076862300, 1.000000000000000000), + ( 1.000000000000000000, 0.3937573777454225200, 1.000000000000000000), + ( 1.000000000000000000, 0.3968041983470236800, 1.000000000000000000), + ( 1.000000000000000000, 0.4085676386354281700, 1.000000000000000000), + ( 1.000000000000000000, 0.4173265843852269600, 1.000000000000000000), + ( 1.000000000000000000, 0.4387620092569881600, 1.000000000000000000), + ( 1.000000000000000000, 0.4514458673448649200, 1.000000000000000000), + ( 1.000000000000000000, 0.4793357291209505200, 1.000000000000000000), + ( 1.000000000000000000, 0.4945415424112101200, 1.000000000000000000), + ( 1.000000000000000000, 0.5263987182472985600, 1.000000000000000000), + ( 1.000000000000000000, 0.5430665799312133200, 1.000000000000000000), + ( 1.000000000000000000, 0.5770027115290365900, 1.000000000000000000), + ( 1.000000000000000000, 0.5940619912631629500, 1.000000000000000000), + ( 1.000000000000000000, 0.6445417317124314500, 1.000000000000000000), + ( 1.000000000000000000, 0.6772647162896735500, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865463500, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#332 = CYLINDRICAL_SURFACE ( 'NONE', #3545, 7.499999999999995600 ) ; +#333 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890700900, 0.2588190451025145200 ) ) ; +#334 = EDGE_CURVE ( 'NONE', #1325, #2820, #892, .T. ) ; +#335 = EDGE_LOOP ( 'NONE', ( #2397, #2402 ) ) ; +#336 = LINE ( 'NONE', #3379, #370 ) ; +#337 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #92, #64, #55, #51, #36, #15, #13, #10 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.003891916060219534300, 0.005837874090329299400, 0.007783832120439065000 ), + .UNSPECIFIED. ) ; +#338 = CARTESIAN_POINT ( 'NONE', ( 21.64932026715844800, -10.00000000000054700, 17.32032696884525100 ) ) ; +#339 = EDGE_CURVE ( 'NONE', #1409, #1004, #653, .T. ) ; +#340 = CARTESIAN_POINT ( 'NONE', ( 7.250680109356662400, 1.859341020080239200, -25.47197933252936500 ) ) ; +#341 = LINE ( 'NONE', #2848, #318 ) ; +#342 = CARTESIAN_POINT ( 'NONE', ( 22.44919999999999800, 12.65496680558645800, -55.06972082365662400 ) ) ; +#343 = CIRCLE ( 'NONE', #3548, 5.000000000000000900 ) ; +#344 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.037274284438658200E-016, 3.871160330909826300E-016 ) ) ; +#345 = CARTESIAN_POINT ( 'NONE', ( 7.698169596456087200, -6.790965163149870400, 19.22509139911782200 ) ) ; +#346 = EDGE_CURVE ( 'NONE', #2820, #3514, #2487, .T. ) ; +#347 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9659258262890700900, -0.2588190451025145200 ) ) ; +#349 = CARTESIAN_POINT ( 'NONE', ( 18.22979091828286300, 24.20781099584119300, -60.90105383358901000 ) ) ; +#348 = PERSON_AND_ORGANIZATION ( #2275, #3296 ) ; +#350 = CARTESIAN_POINT ( 'NONE', ( 21.67293059273067300, -4.971133921944722400, 18.19546223935248000 ) ) ; +#351 = CARTESIAN_POINT ( 'NONE', ( 15.52130396212223600, 11.17157005558595600, -21.48162508982729000 ) ) ; +#352 = LINE ( 'NONE', #920, #2022 ) ; +#353 = CARTESIAN_POINT ( 'NONE', ( 10.06917332148995900, 10.00000000000000200, 15.03673185473629600 ) ) ; +#354 = DATE_AND_TIME ( #3574, #2800 ) ; +#355 = DIRECTION ( 'NONE', ( -0.7071067811865475700, 0.7071067811865474600, 1.226634733346699100E-016 ) ) ; +#356 = TOROIDAL_SURFACE ( 'NONE', #56, 10.00000000000000400, 2.500000000000000000 ) ; +#357 = CARTESIAN_POINT ( 'NONE', ( 12.44919999999999800, 19.65546469306329100, -53.19394306809147800 ) ) ; +#358 = CARTESIAN_POINT ( 'NONE', ( 16.53532260836120900, 13.00383239966997800, -18.66140695500012100 ) ) ; +#359 = PLANE ( 'NONE', #2531 ) ; +#360 = CARTESIAN_POINT ( 'NONE', ( 13.65331807455572600, 23.54869279075365500, -64.16441223329626100 ) ) ; +#361 = CARTESIAN_POINT ( 'NONE', ( 20.59357989701513600, -1.966513216071871900, 19.12388821910320000 ) ) ; +#362 = EDGE_CURVE ( 'NONE', #1416, #381, #642, .T. ) ; +#363 = CARTESIAN_POINT ( 'NONE', ( 18.69920000000000100, -9.999999999999996400, 17.57843258350779100 ) ) ; +#364 = ADVANCED_FACE ( 'NONE', ( #612 ), #1882, .F. ) ; +#365 = EDGE_CURVE ( 'NONE', #1647, #2503, #597, .T. ) ; +#366 = CARTESIAN_POINT ( 'NONE', ( 6.224600000000039700, 3.354751084655890600, 20.42893218813457100 ) ) ; +#367 = CARTESIAN_POINT ( 'NONE', ( 8.639780994364716800, 12.97933755770448800, -18.56287200760088000 ) ) ; +#368 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#369 = CARTESIAN_POINT ( 'NONE', ( 8.364856704963880700, 24.09528809209816900, -62.62517450508985200 ) ) ; +#370 = VECTOR ( 'NONE', #3801, 1000.000000000000000 ) ; +#371 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#372 = ORIENTED_EDGE ( 'NONE', *, *, #756, .F. ) ; +#373 = VECTOR ( 'NONE', #3454, 1000.000000000000000 ) ; +#374 = CARTESIAN_POINT ( 'NONE', ( 4.929560515571086700, 4.052713221188399800, 18.95778351778779600 ) ) ; +#375 = CARTESIAN_POINT ( 'NONE', ( 9.684489329817497000, 8.229809786640581500, 18.86319961555588500 ) ) ; +#376 = ORIENTED_EDGE ( 'NONE', *, *, #4, .F. ) ; +#377 = FACE_OUTER_BOUND ( 'NONE', #2769, .T. ) ; +#378 = CARTESIAN_POINT ( 'NONE', ( 3.225469407269325300, 4.971133921944727700, 18.19546223935249100 ) ) ; +#379 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#380 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.588080900582084500E-016, -1.000000000000000000 ) ) ; +#381 = VERTEX_POINT ( 'NONE', #2525 ) ; +#382 = VECTOR ( 'NONE', #3679, 1000.000000000000000 ) ; +#383 = CARTESIAN_POINT ( 'NONE', ( 20.22499982726674600, 10.47569949199192300, 17.56023512295524100 ) ) ; +#384 = LINE ( 'NONE', #3668, #373 ) ; +#385 = CARTESIAN_POINT ( 'NONE', ( 19.94919999999999800, 2.371521134422838600, -31.35343597986624400 ) ) ; +#386 = CYLINDRICAL_SURFACE ( 'NONE', #3560, 2.500000000000000000 ) ; +#387 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #152, #789, #179, #149, #142, #138 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002046501110078675800, 0.004093002220157356900 ), + .UNSPECIFIED. ) ; +#388 = EDGE_CURVE ( 'NONE', #3135, #3551, #564, .T. ) ; +#389 = CARTESIAN_POINT ( 'NONE', ( 5.945543623763007300, 2.836973682206069400, 20.42893218572387700 ) ) ; +#390 = EDGE_LOOP ( 'NONE', ( #66, #814, #1589, #3417 ) ) ; +#391 = EDGE_CURVE ( 'NONE', #3468, #1378, #601, .T. ) ; +#392 = CARTESIAN_POINT ( 'NONE', ( 20.62948963597577300, -1.793217510819668800, 19.12784223024717500 ) ) ; +#393 = CIRCLE ( 'NONE', #1332, 4.999999999999997300 ) ; +#394 = CARTESIAN_POINT ( 'NONE', ( 14.19328436165627100, -8.482653894107798500, 18.83990488806292500 ) ) ; +#395 = CARTESIAN_POINT ( 'NONE', ( 4.713853278986904100, 3.453576491566637200, 19.05214880419556400 ) ) ; +#396 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#397 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000001200, -0.6762444647246469400, -24.64441778288738400 ) ) ; +#398 = CIRCLE ( 'NONE', #80, 7.071067811865436400 ) ; +#399 = CARTESIAN_POINT ( 'NONE', ( 6.199200000000017100, -9.999999999999996400, 17.57843258350778700 ) ) ; +#400 = CARTESIAN_POINT ( 'NONE', ( 22.15079265171906900, 6.911657387100494700, 17.59069596971669100 ) ) ; +#401 = CYLINDRICAL_SURFACE ( 'NONE', #1959, 4.999999999999997300 ) ; +#402 = CARTESIAN_POINT ( 'NONE', ( 2.958237810941025900, 3.439852373395918800, 18.34629042868949600 ) ) ; +#403 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -4.014749828072290900, 13.61697764103997500 ) ) ; +#404 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.008381691144633100, 13.42410956663136200 ) ) ; +#405 = CARTESIAN_POINT ( 'NONE', ( 5.455688474771212900, 1.608154689694574900, 20.32548863961615700 ) ) ; +#406 = DIRECTION ( 'NONE', ( -0.4744334482306233300, 0.8802913740347569900, 7.483250668847164700E-016 ) ) ; +#407 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999996700, -3.061616997868382300E-015, -12.50000000000000000 ) ) ; +#408 = EDGE_CURVE ( 'NONE', #2547, #3514, #638, .T. ) ; +#409 = ADVANCED_FACE ( 'NONE', ( #558 ), #2367, .T. ) ; +#410 = CARTESIAN_POINT ( 'NONE', ( 4.304820102985083000, 1.966513216071831900, 19.12388821910346000 ) ) ; +#411 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -3.061616997868381200E-016, 2.500000000000002200 ) ) ; +#412 = CARTESIAN_POINT ( 'NONE', ( 19.94919999999999800, 4.651280611074646700, -30.32742587825108100 ) ) ; +#413 = LINE ( 'NONE', #1942, #382 ) ; +#414 = EDGE_CURVE ( 'NONE', #3514, #1196, #1119, .T. ) ; +#415 = CARTESIAN_POINT ( 'NONE', ( 6.290588346983835100, 13.30592283846863600, -19.83787199906764100 ) ) ; +#416 = CARTESIAN_POINT ( 'NONE', ( 2.830685303880531300, 2.393624290258830700, 18.38786220468163200 ) ) ; +#417 = ORIENTED_EDGE ( 'NONE', *, *, #487, .T. ) ; +#418 = CARTESIAN_POINT ( 'NONE', ( 6.659370850053173600, 5.789829149946832800, 19.31194509232209500 ) ) ; +#419 = VECTOR ( 'NONE', #3701, 1000.000000000000000 ) ; +#420 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890700900, 0.2588190451025145200 ) ) ; +#421 = ORIENTED_EDGE ( 'NONE', *, *, #2984, .F. ) ; +#422 = LINE ( 'NONE', #3708, #419 ) ; +#423 = EDGE_CURVE ( 'NONE', #1559, #3369, #542, .T. ) ; +#424 = CARTESIAN_POINT ( 'NONE', ( 5.413063533127968600, 1.465819893152825200, 20.31434566270735700 ) ) ; +#425 = FACE_OUTER_BOUND ( 'NONE', #1792, .T. ) ; +#426 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -3.061616997868381200E-016, 2.500000000000002200 ) ) ; +#427 = CARTESIAN_POINT ( 'NONE', ( 21.80456837799901500, -4.224787369886995800, 18.28922733968656500 ) ) ; +#428 = CARTESIAN_POINT ( 'NONE', ( 14.47251738323753800, -8.746667767669151800, 18.52506489801437800 ) ) ; +#429 = VECTOR ( 'NONE', #2519, 1000.000000000000000 ) ; +#430 = CARTESIAN_POINT ( 'NONE', ( 4.268910364024378600, 1.793217510819803200, 19.12784223024757000 ) ) ; +#431 = CARTESIAN_POINT ( 'NONE', ( 20.39650958923500900, -2.819904684325233600, 19.09702795464674100 ) ) ; +#432 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000001200, 1.758564121058930900, -25.31515713847477000 ) ) ; +#433 = CARTESIAN_POINT ( 'NONE', ( -0.2580228017279062600, -5.084591110718484700, 17.51037509623230900 ) ) ; +#434 = CIRCLE ( 'NONE', #3569, 2.500000000000003100 ) ; +#435 = CIRCLE ( 'NONE', #3618, 2.500000000000000000 ) ; +#436 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025145200, 0.9659258262890699800 ) ) ; +#437 = DATE_AND_TIME ( #3528, #2744 ) ; +#438 = EDGE_CURVE ( 'NONE', #2736, #2543, #593, .T. ) ; +#439 = CARTESIAN_POINT ( 'NONE', ( 2.807339830222061100, 2.181612988305020800, 18.39472323545859200 ) ) ; +#440 = CARTESIAN_POINT ( 'NONE', ( 21.53895156363623200, 6.203179903760245800, 17.99539218470778600 ) ) ; +#441 = DIRECTION ( 'NONE', ( -0.7071067811865433500, 0.0000000000000000000, -0.7071067811865517900 ) ) ; +#442 = CIRCLE ( 'NONE', #2595, 10.00000000000000200 ) ; +#443 = CIRCLE ( 'NONE', #3261, 0.5800000000000006300 ) ; +#444 = CARTESIAN_POINT ( 'NONE', ( 14.75738735232873100, -9.043484976561480000, 18.24659179280778800 ) ) ; +#445 = CARTESIAN_POINT ( 'NONE', ( 5.338151425869471100, 1.176555387325008800, 20.29381666077451400 ) ) ; +#446 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999999400, 4.999999999999995600, -7.500000000000000900 ) ) ; +#447 = CARTESIAN_POINT ( 'NONE', ( 3.333333333333335300, 4.913000608485470300, 18.24465176069331600 ) ) ; +#448 = FACE_OUTER_BOUND ( 'NONE', #1506, .T. ) ; +#449 = AXIS2_PLACEMENT_3D ( 'NONE', #1272, #1248, #1234 ) ; +#450 = ADVANCED_FACE ( 'NONE', ( #547 ), #1513, .T. ) ; +#451 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #128, #139, #440, #186, #2574, #400, #2178, #2500, #122, #1864, #3677, #1542, #3383, #557, #3090, #964, #679, #2798 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( -1.425673530049068700E-005, 0.0004949102456622804400, 0.001004077226625051500, 0.002022411188550591400, 0.004059079112401665400, 0.005077413074327206100, 0.006095747036252747600, 0.007114080998178289200, 0.008132414960103829000 ), + .UNSPECIFIED. ) ; +#452 = CARTESIAN_POINT ( 'NONE', ( 4.205648120624474000, 1.440427822882590000, 19.13380485979153900 ) ) ; +#453 = DIRECTION ( 'NONE', ( -0.6484729204542164500, 0.0000000000000000000, 0.7612377233411251600 ) ) ; +#454 = CARTESIAN_POINT ( 'NONE', ( 4.949199999999994000, 12.65496680558646500, -55.06972082365662400 ) ) ; +#455 = CARTESIAN_POINT ( 'NONE', ( 14.82168961385567500, -7.874531352087136500, 19.30901073776923800 ) ) ; +#456 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2686, #2590, #2522, #2494, #2477, #2468 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001055706139610577900, 0.002111412279221155800 ), + .UNSPECIFIED. ) ; +#457 = CARTESIAN_POINT ( 'NONE', ( 2.766110056272552700, 1.750846578510553800, 18.40604335237537400 ) ) ; +#458 = CARTESIAN_POINT ( 'NONE', ( 12.44919999999999800, 19.65546469306329100, -53.19394306809147800 ) ) ; +#459 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1263, #1190, #1162, #1149, #1142, #1136, #1129, #1126, #1121, #1115, #1105, #1090, #1083, #1077, #1073, #1069, #1065, #1049, #1042, #1038 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001371930648718653800, 0.002743861297437307600, 0.004115791946155961500, 0.004801757270515289200, 0.005487722594874617900, 0.006859653243593270000, 0.008231583892311919400, 0.009603514541030571500, 0.01097544518974922400 ), + .UNSPECIFIED. ) ; +#460 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#461 = FACE_OUTER_BOUND ( 'NONE', #2305, .T. ) ; +#462 = ADVANCED_FACE ( 'NONE', ( #510 ), #955, .F. ) ; +#463 = LINE ( 'NONE', #2641, #429 ) ; +#464 = CARTESIAN_POINT ( 'NONE', ( 5.306002309162302300, 1.029899394811866700, 20.28447093426806800 ) ) ; +#465 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000500, 1.437486186627949600, -25.37941695385605100 ) ) ; +#466 = EDGE_CURVE ( 'NONE', #3369, #3656, #553, .T. ) ; +#467 = ORIENTED_EDGE ( 'NONE', *, *, #726, .T. ) ; +#468 = LINE ( 'NONE', #3811, #479 ) ; +#469 = CARTESIAN_POINT ( 'NONE', ( 7.488416291753847700, 11.47788851493753100, -22.67481328856048600 ) ) ; +#470 = EDGE_CURVE ( 'NONE', #906, #320, #514, .T. ) ; +#471 = CARTESIAN_POINT ( 'NONE', ( 4.178391126430325300, 1.261208370644690400, 19.13580928788970700 ) ) ; +#472 = ADVANCED_FACE ( 'NONE', ( #519 ), #610, .T. ) ; +#473 = CARTESIAN_POINT ( 'NONE', ( 6.004007102129088800, -1.034998074996624600, -24.49426083617786200 ) ) ; +#474 = ORIENTED_EDGE ( 'NONE', *, *, #1465, .F. ) ; +#475 = CIRCLE ( 'NONE', #3580, 4.999999999999999100 ) ; +#476 = CARTESIAN_POINT ( 'NONE', ( 21.94016218905815700, -3.439852373396038700, 18.34629042869049400 ) ) ; +#477 = FACE_OUTER_BOUND ( 'NONE', #3235, .T. ) ; +#478 = CARTESIAN_POINT ( 'NONE', ( 2.748288954205816600, 1.532431811596467700, 18.41048896650063700 ) ) ; +#479 = VECTOR ( 'NONE', #1698, 1000.000000000000100 ) ; +#480 = CARTESIAN_POINT ( 'NONE', ( 13.92015522073257300, 10.00000000000000200, 17.41044999498248200 ) ) ; +#481 = CIRCLE ( 'NONE', #3586, 5.000000000000000900 ) ; +#482 = CARTESIAN_POINT ( 'NONE', ( 10.07671038615792500, -7.874531352086803400, 19.30901073777279100 ) ) ; +#483 = CARTESIAN_POINT ( 'NONE', ( 15.21391067019788900, -8.229809786680407400, 18.86319961558942600 ) ) ; +#484 = CARTESIAN_POINT ( 'NONE', ( 5.228540052201273300, 0.5900247819489357100, 20.26137899434870300 ) ) ; +#485 = CARTESIAN_POINT ( 'NONE', ( 5.046694876810428300, -6.421387181159029300, 18.49541510015830100 ) ) ; +#486 = TOROIDAL_SURFACE ( 'NONE', #2760, 10.00000000000000400, 2.500000000000000000 ) ; +#487 = EDGE_CURVE ( 'NONE', #1363, #2058, #3079, .T. ) ; +#488 = CIRCLE ( 'NONE', #1227, 10.00000000000000000 ) ; +#489 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#490 = ADVANCED_FACE ( 'NONE', ( #477 ), #879, .T. ) ; +#491 = EDGE_CURVE ( 'NONE', #1378, #2881, #468, .T. ) ; +#493 = CARTESIAN_POINT ( 'NONE', ( 4.112672266866311200, 0.7234044214948549500, 19.14002803581178500 ) ) ; +#492 = FACE_BOUND ( 'NONE', #3771, .T. ) ; +#494 = CARTESIAN_POINT ( 'NONE', ( 14.67686342233451000, 11.09646088210682500, -21.17157453395841300 ) ) ; +#495 = CARTESIAN_POINT ( 'NONE', ( 15.61737989983890000, -8.643865741395760700, 18.48197688189835100 ) ) ; +#496 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 22.50000000000000400 ) ) ; +#497 = CARTESIAN_POINT ( 'NONE', ( 2.970350473927928700, -3.297271544787449200, 18.36912321685300100 ) ) ; +#498 = CARTESIAN_POINT ( 'NONE', ( 19.44271152522877300, -1.608154689694662800, 20.32548863961614700 ) ) ; +#499 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1387, #1535, #1310, #1300, #1286, #1268, #1259, #1039, #1030, #1018, #1002, #989, #983, #971, #960, #806, #742, #728 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 1.749612623127657200E-018, 0.001016457793701209300, 0.002032915587402416800, 0.003049373381103624500, 0.004065831174804831900, 0.006098746762207243900, 0.007115204555908450300, 0.007623433452759052200, 0.008131662349609655000 ), + .UNSPECIFIED. ) ; +#500 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #520 ) ; +#501 = CARTESIAN_POINT ( 'NONE', ( 2.705260367490828000, 0.8779108195968244900, 18.42073646242991500 ) ) ; +#502 = CARTESIAN_POINT ( 'NONE', ( 18.08210457180118900, 6.115304675227802600, 19.19276157567847100 ) ) ; +#503 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3035, #3044, #3018, #3009, #2978, #2970, #2958, #2942, #2935, #2930, #2917, #2906, #2903, #2898, #2895, #2888 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 5.076104428597243200E-018, 0.001317686133207896100, 0.002635372266415787400, 0.003953058399623678500, 0.005270744532831569600, 0.006588430666039460700, 0.007906116799247351800, 0.01054148906566314300 ), + .UNSPECIFIED. ) ; +#504 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#505 = CARTESIAN_POINT ( 'NONE', ( 15.37754632281523600, -7.266828808002374600, 19.69984150254266100 ) ) ; +#506 = CARTESIAN_POINT ( 'NONE', ( 5.201800121948901200, 0.2946769692807614800, 20.25265964746292000 ) ) ; +#507 = ADVANCED_FACE ( 'NONE', ( #461 ), #1382, .F. ) ; +#508 = CARTESIAN_POINT ( 'NONE', ( 3.568976306003018200, -5.960521729848155200, 18.11286642393776700 ) ) ; +#509 = VERTEX_POINT ( 'NONE', #2671 ) ; +#510 = FACE_OUTER_BOUND ( 'NONE', #3052, .T. ) ; +#511 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025144700, 0.9659258262890699800 ) ) ; +#512 = ORIENTED_EDGE ( 'NONE', *, *, #4, .T. ) ; +#513 = CARTESIAN_POINT ( 'NONE', ( 4.089819850587384800, 0.3611391803263287500, 19.14069709398409100 ) ) ; +#514 = CIRCLE ( 'NONE', #3669, 2.500000000000000000 ) ; +#515 = CARTESIAN_POINT ( 'NONE', ( 21.53895156363622800, -6.203179903760236000, 17.99539218470778900 ) ) ; +#516 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025144700 ) ) ; +#517 = CARTESIAN_POINT ( 'NONE', ( 15.87910316767625600, -7.699368914626456100, 19.11313420167450500 ) ) ; +#518 = EDGE_LOOP ( 'NONE', ( #1696, #1701, #1704, #1705, #1727 ) ) ; +#519 = FACE_OUTER_BOUND ( 'NONE', #2966, .T. ) ; +#520 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #1831, #2375 ) ; +#521 = CARTESIAN_POINT ( 'NONE', ( 7.488416291753869000, 21.11132182176493200, -58.62727584096748500 ) ) ; +#522 = DIRECTION ( 'NONE', ( -0.7499999999999952300, 0.1711927069771176400, -0.6388998803238689100 ) ) ; +#523 = CARTESIAN_POINT ( 'NONE', ( 90.32016550602631400, 7.455127018922267400, 1.997595264191612600 ) ) ; +#524 = CARTESIAN_POINT ( 'NONE', ( 2.690222661936638300, 0.4382712329823187900, 18.42368678958672800 ) ) ; +#525 = FACE_OUTER_BOUND ( 'NONE', #913, .T. ) ; +#526 = EDGE_CURVE ( 'NONE', #1547, #970, #435, .T. ) ; +#527 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3691, #2534, #3605, #3585, #3577, #3563, #3550, #3540 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 3.737219266447953200E-015, 0.002610629555723539800, 0.003915944333583446700, 0.005221259111443352600 ), + .UNSPECIFIED. ) ; +#528 = CARTESIAN_POINT ( 'NONE', ( 16.40674998527975600, -8.229377242348467900, 18.63839610583514900 ) ) ; +#529 = LINE ( 'NONE', #3113, #2931 ) ; +#530 = FACE_OUTER_BOUND ( 'NONE', #2142, .T. ) ; +#531 = CARTESIAN_POINT ( 'NONE', ( 6.540231032372739500, 2.297559886860632600, -26.16855165817070300 ) ) ; +#532 = EDGE_CURVE ( 'NONE', #3567, #1196, #481, .T. ) ; +#533 = AXIS2_PLACEMENT_3D ( 'NONE', #3430, #2521, #730 ) ; +#534 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 1.734723475976807600E-016 ) ) ; +#535 = FACE_OUTER_BOUND ( 'NONE', #3242, .T. ) ; +#536 = EDGE_CURVE ( 'NONE', #2689, #3224, #475, .T. ) ; +#537 = CARTESIAN_POINT ( 'NONE', ( 5.201974873248423700, -0.2975976839680372100, 20.25271505346759300 ) ) ; +#538 = CARTESIAN_POINT ( 'NONE', ( 18.05434278210793400, 10.00000000000000200, 14.04252096809285700 ) ) ; +#539 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890700900, 0.2588190451025145200 ) ) ; +#540 = CARTESIAN_POINT ( 'NONE', ( 16.16345975449173600, -6.387680343360137200, 20.12007448808859800 ) ) ; +#541 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999998500, 4.999999999999997300, 7.499999999999996400 ) ) ; +#542 = CIRCLE ( 'NONE', #3731, 10.00000000000000200 ) ; +#543 = CARTESIAN_POINT ( 'NONE', ( 4.089968703285348900, -0.3647196016798329200, 19.14069107782830100 ) ) ; +#544 = EDGE_CURVE ( 'NONE', #2392, #2009, #561, .T. ) ; +#545 = CARTESIAN_POINT ( 'NONE', ( 21.43401729950466400, -6.081579897085065400, 18.05620270955174800 ) ) ; +#546 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9659258262890699800, 0.2588190451025143000 ) ) ; +#547 = FACE_OUTER_BOUND ( 'NONE', #1137, .T. ) ; +#548 = CARTESIAN_POINT ( 'NONE', ( 16.79743232885209600, -6.942431473386982100, 19.32218308758186600 ) ) ; +#549 = CARTESIAN_POINT ( 'NONE', ( 2.690320457406151900, -0.4426163075520505000, 18.42366629864336900 ) ) ; +#550 = CARTESIAN_POINT ( 'NONE', ( 17.76313896677555300, -9.999999999999699800, 17.50071602367609100 ) ) ; +#551 = AXIS2_PLACEMENT_3D ( 'NONE', #3762, #3753, #3727 ) ; +#552 = ORIENTED_EDGE ( 'NONE', *, *, #1211, .F. ) ; +#553 = CIRCLE ( 'NONE', #3698, 5.000000000000000900 ) ; +#554 = CARTESIAN_POINT ( 'NONE', ( 16.85663215444386900, -5.615826729132473700, 20.37241298660123300 ) ) ; +#555 = EDGE_CURVE ( 'NONE', #1957, #1151, #463, .T. ) ; +#556 = ORIENTED_EDGE ( 'NONE', *, *, #137, .F. ) ; +#557 = CARTESIAN_POINT ( 'NONE', ( 24.64018678594236200, 9.708712428969715100, 14.24433959223951400 ) ) ; +#558 = FACE_OUTER_BOUND ( 'NONE', #1496, .T. ) ; +#559 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000004700, -18.31287684118414600, -36.48065332244480900 ) ) ; +#560 = CARTESIAN_POINT ( 'NONE', ( 17.50709078572075600, -7.645653937514674100, 18.73159073756413000 ) ) ; +#561 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #144, #2030, #465, #154, #2204, #3463, #1338, #3215, #3716, #2859, #2802, #1585 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 1.084202172485504400E-018, 0.0004872227645978232500, 0.0009744455291956454200, 0.001948891058391291500, 0.002923336587586937800, 0.003897782116782583400 ), + .UNSPECIFIED. ) ; +#562 = VECTOR ( 'NONE', #87, 1000.000000000000000 ) ; +#563 = CARTESIAN_POINT ( 'NONE', ( 5.229084492025190700, -0.5954397947696599100, 20.26155762220667700 ) ) ; +#564 = LINE ( 'NONE', #2768, #562 ) ; +#565 = CARTESIAN_POINT ( 'NONE', ( 14.21572941022037500, -8.460904434013722100, 18.85664821966121700 ) ) ; +#566 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000004700, 4.651280611074636100, -30.32742587825108400 ) ) ; +#567 = ORIENTED_EDGE ( 'NONE', *, *, #544, .T. ) ; +#568 = FACE_OUTER_BOUND ( 'NONE', #1191, .T. ) ; +#569 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#570 = DIRECTION ( 'NONE', ( 1.060000827627150900E-016, -1.588080900582084500E-016, -1.000000000000000000 ) ) ; +#572 = CARTESIAN_POINT ( 'NONE', ( 4.113138106763188700, -0.7300460583496067900, 19.14001546534313300 ) ) ; +#571 = LINE ( 'NONE', #3670, #7 ) ; +#573 = ADVANCED_FACE ( 'NONE', ( #425 ), #386, .T. ) ; +#574 = CARTESIAN_POINT ( 'NONE', ( 19.48533646687231200, -1.465819893152554300, 20.31434566270712200 ) ) ; +#575 = CARTESIAN_POINT ( 'NONE', ( 16.41788943822915700, -6.100011023491509500, 20.23211946412516600 ) ) ; +#576 = FACE_OUTER_BOUND ( 'NONE', #868, .T. ) ; +#577 = CARTESIAN_POINT ( 'NONE', ( 2.705567023572901200, -0.8859737611483053900, 18.42067712975549700 ) ) ; +#578 = CARTESIAN_POINT ( 'NONE', ( 8.100967671149307500, 6.942431473387995500, 19.32218308758211100 ) ) ; +#579 = EDGE_CURVE ( 'NONE', #2346, #1298, #422, .T. ) ; +#580 = EDGE_CURVE ( 'NONE', #2992, #1590, #413, .T. ) ; +#581 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000031400, 4.999999999999973400, 20.42893218813457100 ) ) ; +#582 = DIRECTION ( 'NONE', ( -0.6484729204542167800, 0.0000000000000000000, -0.7612377233411249400 ) ) ; +#583 = EDGE_CURVE ( 'NONE', #2348, #197, #384, .T. ) ; +#584 = CARTESIAN_POINT ( 'NONE', ( 5.333838295392279600, -1.185586819602182800, 20.29275226919782300 ) ) ; +#585 = EDGE_CURVE ( 'NONE', #902, #2430, #434, .T. ) ; +#586 = CARTESIAN_POINT ( 'NONE', ( 8.856254383156620900, 6.524255011830927500, 20.06062420243769400 ) ) ; +#587 = PRODUCT ( 'Hammer_Slide', 'Hammer_Slide', '', ( #1463 ) ) ; +#588 = CARTESIAN_POINT ( 'NONE', ( 17.09216889279568000, -6.695526535361010700, 19.36418800647839300 ) ) ; +#589 = CARTESIAN_POINT ( 'NONE', ( 4.202040767886399100, -1.451838494098649300, 19.13427333493852000 ) ) ; +#590 = CARTESIAN_POINT ( 'NONE', ( 17.12849556873210200, 10.00000000000000200, 14.39245831977563700 ) ) ; +#591 = ADVANCED_FACE ( 'NONE', ( #377 ), #332, .F. ) ; +#592 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -10.00000000000000400, -7.499999999999995600 ) ) ; +#593 = CIRCLE ( 'NONE', #3712, 5.000000000000001800 ) ; +#594 = CARTESIAN_POINT ( 'NONE', ( 9.377526469240502000, 7.105152569015182000, 19.76776087404739000 ) ) ; +#595 = EDGE_LOOP ( 'NONE', ( #2438, #246, #1011, #2545 ) ) ; +#596 = CARTESIAN_POINT ( 'NONE', ( 2.763770444153202700, -1.764437413706307700, 18.40678790443697800 ) ) ; +#597 = LINE ( 'NONE', #658, #604 ) ; +#598 = CARTESIAN_POINT ( 'NONE', ( 9.635333645311805000, 7.387764451434810200, 19.60152928809442900 ) ) ; +#599 = CARTESIAN_POINT ( 'NONE', ( 17.86237368436300300, -7.456514879534432300, 18.73900546398667200 ) ) ; +#600 = ORIENTED_EDGE ( 'NONE', *, *, #3032, .F. ) ; +#601 = CIRCLE ( 'NONE', #3766, 2.499999999999998200 ) ; +#602 = EDGE_CURVE ( 'NONE', #381, #1957, #336, .T. ) ; +#603 = CARTESIAN_POINT ( 'NONE', ( 7.488416291753869900, 23.52613638748761100, -57.98022822821120300 ) ) ; +#604 = VECTOR ( 'NONE', #2465, 1000.000000000000100 ) ; +#605 = CARTESIAN_POINT ( 'NONE', ( 10.15498186616610200, 7.936596969539029300, 19.24518683207134700 ) ) ; +#606 = EDGE_CURVE ( 'NONE', #2261, #3514, #343, .T. ) ; +#607 = CARTESIAN_POINT ( 'NONE', ( 15.06767730675429100, 8.255779359237827500, 18.88332220509628100 ) ) ; +#608 = CARTESIAN_POINT ( 'NONE', ( 11.40526348943443400, -9.999999999999998200, 15.32111431372947100 ) ) ; +#609 = CARTESIAN_POINT ( 'NONE', ( 3.794503647183875600, 9.999999999999436900, 17.35167560874895900 ) ) ; +#610 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3209, #2012, #2944 ), + ( #822, #2647, #538 ), + ( #2337, #249, #2025 ), + ( #3807, #1691, #3524 ), + ( #1393, #3219, #1401 ), + ( #3234, #1116, #3538 ), + ( #1708, #42, #1773 ), + ( #3599, #1464, #3251 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001924698808057211100, 0.003849397616114422100, 0.007698795232228844300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8164965809277260300, 1.000000000000000000), + ( 1.000000000000000000, 0.8041240654838623900, 1.000000000000000000), + ( 1.000000000000000000, 0.7926702635783994300, 1.000000000000000000), + ( 1.000000000000000000, 0.7719025772521620500, 1.000000000000000000), + ( 1.000000000000000000, 0.7625754468079514200, 1.000000000000000000), + ( 1.000000000000000000, 0.7373423233570557400, 1.000000000000000000), + ( 1.000000000000000000, 0.7241342231881082700, 1.000000000000000000), + ( 1.000000000000000000, 0.7130631886949769800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#611 = PLANE ( 'NONE', #2764 ) ; +#612 = FACE_OUTER_BOUND ( 'NONE', #2352, .T. ) ; +#613 = CARTESIAN_POINT ( 'NONE', ( 14.23479170414112200, 11.06822478649854900, -21.05232616951826000 ) ) ; +#614 = CARTESIAN_POINT ( 'NONE', ( 16.92935000743833400, -5.537389203067002400, 20.38692187479208300 ) ) ; +#615 = EDGE_CURVE ( 'NONE', #918, #1054, #341, .T. ) ; +#616 = CARTESIAN_POINT ( 'NONE', ( 7.488416291753869900, 21.11132182176493500, -58.62727584096748500 ) ) ; +#617 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1008, #998, #980, #976 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.002430971657955145700, 0.003512578817433820000 ), + .UNSPECIFIED. ) ; +#618 = LINE ( 'NONE', #1628, #2559 ) ; +#619 = CARTESIAN_POINT ( 'NONE', ( 17.67174231843431900, -6.222577491227216500, 19.38612370741685000 ) ) ; +#620 = CARTESIAN_POINT ( 'NONE', ( 5.409993464358099600, -1.471902724612068800, 20.31453066124100500 ) ) ; +#621 = CIRCLE ( 'NONE', #2516, 10.00000000000000200 ) ; +#622 = CARTESIAN_POINT ( 'NONE', ( 10.41670461645081500, 8.202839060351703200, 19.05490808387007800 ) ) ; +#623 = CARTESIAN_POINT ( 'NONE', ( 7.756763088361254600, 7.587961172463361800, 18.86260440344594300 ) ) ; +#624 = FACE_OUTER_BOUND ( 'NONE', #2379, .T. ) ; +#625 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3458, #1329, #3163, #1034 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002391329735993467300 ), + .UNSPECIFIED. ) ; +#626 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000001200, 10.00000000000000200, 14.27124344467704900 ) ) ; +#627 = CYLINDRICAL_SURFACE ( 'NONE', #2358, 2.500000000000000000 ) ; +#628 = CARTESIAN_POINT ( 'NONE', ( 18.55902793009459000, -7.100102038078702500, 18.70376821350241100 ) ) ; +#629 = CARTESIAN_POINT ( 'NONE', ( 4.266624308944218800, -1.801493509179468800, 19.12911455868347600 ) ) ; +#630 = CARTESIAN_POINT ( 'NONE', ( 21.32708274542899900, -5.957257645293892300, 18.11089526564345700 ) ) ; +#631 = EDGE_CURVE ( 'NONE', #1685, #2392, #321, .T. ) ; +#632 = CARTESIAN_POINT ( 'NONE', ( 17.18723403019355100, -5.261965970764917300, 20.42893218745679100 ) ) ; +#633 = CARTESIAN_POINT ( 'NONE', ( 5.687737663920879400, -2.302328493910141400, 20.38127276860311100 ) ) ; +#634 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000002000, -0.2788125330342498000, -24.92994530669452400 ) ) ; +#635 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#636 = CARTESIAN_POINT ( 'NONE', ( 18.00626095683051300, 24.22188852777070500, -61.16665193529871700 ) ) ; +#637 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.838808320239663900E-032, -1.060000827627150900E-016 ) ) ; +#638 = CIRCLE ( 'NONE', #3758, 10.00000000000000200 ) ; +#639 = CARTESIAN_POINT ( 'NONE', ( 17.95742250120231600, -5.996409224265350200, 19.36499689277323500 ) ) ; +#640 = CARTESIAN_POINT ( 'NONE', ( 7.838766497390977900, 21.19129168855564400, -58.92572744690480100 ) ) ; +#641 = CARTESIAN_POINT ( 'NONE', ( 2.449200000000002900, -10.00000000000000200, 27.50000000000000400 ) ) ; +#642 = LINE ( 'NONE', #3775, #647 ) ; +#643 = CARTESIAN_POINT ( 'NONE', ( 18.90129895896148700, -6.932905552282282000, 18.66017758393366300 ) ) ; +#644 = CARTESIAN_POINT ( 'NONE', ( 2.805960384543633600, -2.191264003406721900, 18.39593668523406200 ) ) ; +#645 = CARTESIAN_POINT ( 'NONE', ( 19.94920000000000100, 12.65496680558646500, -55.06972082365662400 ) ) ; +#646 = CARTESIAN_POINT ( 'NONE', ( 15.40247739297577600, 12.90702868440300600, -18.27135574031446600 ) ) ; +#647 = VECTOR ( 'NONE', #3397, 1000.000000000000000 ) ; +#648 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#649 = CARTESIAN_POINT ( 'NONE', ( 13.13897783505423300, 23.49643866827393500, -64.26410735998580000 ) ) ; +#650 = APPROVAL ( #1289, 'UNSPECIFIED' ) ; +#651 = ADVANCED_FACE ( 'NONE', ( #276 ), #293, .F. ) ; +#652 = VERTEX_POINT ( 'NONE', #2506 ) ; +#653 = CIRCLE ( 'NONE', #3776, 100.0000000000000000 ) ; +#654 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.014749828072294400, 13.61697764103997500 ) ) ; +#655 = EDGE_CURVE ( 'NONE', #979, #3148, #254, .T. ) ; +#656 = CARTESIAN_POINT ( 'NONE', ( 5.690174720050148200, -2.308342240460891300, 20.38178112316686000 ) ) ; +#657 = CIRCLE ( 'NONE', #3798, 10.00000000000000500 ) ; +#658 = CARTESIAN_POINT ( 'NONE', ( 19.94919999999999800, -18.31287684118414600, -36.48065332244480900 ) ) ; +#659 = EDGE_CURVE ( 'NONE', #2689, #979, #1396, .T. ) ; +#660 = CIRCLE ( 'NONE', #309, 10.00000000000000200 ) ; +#661 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999996900, -4.999999999999970700, 20.42893218813457100 ) ) ; +#662 = VECTOR ( 'NONE', #1315, 1000.000000000000000 ) ; +#663 = CARTESIAN_POINT ( 'NONE', ( 4.501730731495312600, -2.818438955213820900, 19.09700861388299100 ) ) ; +#664 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.352764644880049000, 13.74547171647606600 ) ) ; +#665 = CARTESIAN_POINT ( 'NONE', ( 7.817871993338620500, 13.07050980650981800, -18.92520300206813000 ) ) ; +#666 = CARTESIAN_POINT ( 'NONE', ( 21.56506666666666700, 4.913000608485468500, 18.24465176069331900 ) ) ; +#667 = ORIENTED_EDGE ( 'NONE', *, *, #1579, .T. ) ; +#669 = CARTESIAN_POINT ( 'NONE', ( 7.591490390727600800, 24.20068771402690900, -61.91976024754469400 ) ) ; +#668 = LINE ( 'NONE', #785, #3749 ) ; +#670 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#671 = CYLINDRICAL_SURFACE ( 'NONE', #2816, 6.123724356957925600 ) ; +#672 = CARTESIAN_POINT ( 'NONE', ( 2.958130148491656500, -3.438076531605294600, 18.34629285462639500 ) ) ; +#673 = CARTESIAN_POINT ( 'NONE', ( 9.520853677181817100, 7.266828807999913500, 19.69984150254349600 ) ) ; +#674 = FACE_OUTER_BOUND ( 'NONE', #2971, .T. ) ; +#675 = CARTESIAN_POINT ( 'NONE', ( 18.23902914994682700, -5.789829149946825700, 19.31194509232210200 ) ) ; +#676 = CARTESIAN_POINT ( 'NONE', ( 5.944758418881290800, -2.835516767502191700, 20.42893218570639000 ) ) ; +#677 = CARTESIAN_POINT ( 'NONE', ( 4.313649639484576200, -6.178701288272028700, 18.29526054258716900 ) ) ; +#678 = CARTESIAN_POINT ( 'NONE', ( 24.89839999999999900, 10.44872086830282300, 17.25550737944266500 ) ) ; +#679 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000600, 9.994186870122499400, 12.93880870483233500 ) ) ; +#680 = EDGE_CURVE ( 'NONE', #1342, #2820, #499, .T. ) ; +#681 = EDGE_CURVE ( 'NONE', #999, #652, #256, .T. ) ; +#682 = ADVANCED_FACE ( 'NONE', ( #280 ), #213, .T. ) ; +#683 = CARTESIAN_POINT ( 'NONE', ( 4.713250002374725700, -3.451910004434719500, 19.05240838219754500 ) ) ; +#684 = CARTESIAN_POINT ( 'NONE', ( 5.834821722338469700, 10.99260280537032800, -20.86370236426849400 ) ) ; +#685 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 2.686245477640248700, 13.83657840114613800 ) ) ; +#686 = EDGE_CURVE ( 'NONE', #1798, #3693, #328, .T. ) ; +#687 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -8.074441630149904000, -13.39944000404294900 ) ) ; +#688 = EDGE_CURVE ( 'NONE', #1749, #3093, #247, .T. ) ; +#689 = CARTESIAN_POINT ( 'NONE', ( 8.205593483251773200, 21.19508319409314000, -59.20043306027014300 ) ) ; +#690 = CARTESIAN_POINT ( 'NONE', ( 22.06771469611967600, -2.393624290258793000, 18.38786220468138300 ) ) ; +#691 = CIRCLE ( 'NONE', #3781, 6.464466094067290700 ) ; +#692 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.345930628605682200, 13.95878937739724400 ) ) ; +#693 = ORIENTED_EDGE ( 'NONE', *, *, #1257, .F. ) ; +#694 = VECTOR ( 'NONE', #1938, 1000.000000000000000 ) ; +#695 = CARTESIAN_POINT ( 'NONE', ( 3.093465464499284900, -4.222721478953237900, 18.28948639725316700 ) ) ; +#696 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 22.50000000000003200 ) ) ; +#697 = ORIENTED_EDGE ( 'NONE', *, *, #1745, .F. ) ; +#698 = CIRCLE ( 'NONE', #3788, 10.00000000000000000 ) ; +#699 = CARTESIAN_POINT ( 'NONE', ( 3.568976306003018200, -5.960521729848155200, 18.11286642393776700 ) ) ; +#700 = CARTESIAN_POINT ( 'NONE', ( 6.224600000000039700, -3.354751084655890600, 20.42893218813457100 ) ) ; +#701 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 0.6717217631694933900, 13.98912143649828900 ) ) ; +#702 = DIRECTION ( 'NONE', ( 0.7071067811865471300, -0.7071067811865477900, -1.040834085586084100E-015 ) ) ; +#703 = VECTOR ( 'NONE', #2865, 1000.000000000000000 ) ; +#704 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -0.6764652950054848000, 13.98897839392125200 ) ) ; +#705 = LINE ( 'NONE', #2569, #694 ) ; +#706 = EDGE_CURVE ( 'NONE', #1734, #3486, #451, .T. ) ; +#707 = CARTESIAN_POINT ( 'NONE', ( 3.225469407269325300, -4.971133921944726800, 18.19546223935249100 ) ) ; +#708 = VECTOR ( 'NONE', #1250, 1000.000000000000000 ) ; +#709 = EDGE_CURVE ( 'NONE', #3658, #2737, #243, .T. ) ; +#710 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -1.347952739108648500, 13.95862717755885300 ) ) ; +#711 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890698700, -0.2588190451025151900 ) ) ; +#712 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -2.685650485037764500, 13.83661045156398700 ) ) ; +#713 = CARTESIAN_POINT ( 'NONE', ( 7.969049992560137200, 5.537389203065393900, 20.38692187479248800 ) ) ; +#714 = PERSON_AND_ORGANIZATION ( #2275, #3296 ) ; +#715 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#716 = CIRCLE ( 'NONE', #2497, 10.00000000000000500 ) ; +#717 = CARTESIAN_POINT ( 'NONE', ( 10.68267058978146300, 8.460904434018118500, 18.85664821965721700 ) ) ; +#719 = CARTESIAN_POINT ( 'NONE', ( 4.929560515571086700, -4.052713221188399800, 18.95778351778779600 ) ) ; +#718 = CIRCLE ( 'NONE', #1189, 2.499999999999999100 ) ; +#720 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.014749828072290900, 13.61697764103997500 ) ) ; +#721 = DIRECTION ( 'NONE', ( 3.892550238777224900E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#722 = CARTESIAN_POINT ( 'NONE', ( 8.976413068362994400, 21.12970091331159800, -59.69667089379718300 ) ) ; +#723 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#724 = AXIS2_PLACEMENT_3D ( 'NONE', #2513, #2839, #1620 ) ; +#725 = CARTESIAN_POINT ( 'NONE', ( 0.6769738009563190900, -5.242566062033884800, 17.54727368663202100 ) ) ; +#726 = EDGE_CURVE ( 'NONE', #3370, #1325, #212, .T. ) ; +#727 = CARTESIAN_POINT ( 'NONE', ( 9.381620353577472900, 21.05820174256463100, -59.91821890459086600 ) ) ; +#728 = CARTESIAN_POINT ( 'NONE', ( 3.568976306003018200, -5.960521729848155200, 18.11286642393776700 ) ) ; +#729 = LINE ( 'NONE', #1860, #708 ) ; +#730 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025144700, 0.9659258262890699800 ) ) ; +#731 = EDGE_CURVE ( 'NONE', #2192, #1590, #3637, .T. ) ; +#732 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3723, #1573, #3124 ), + ( #1296, #3421, #995 ), + ( #2554, #2854, #1010 ), + ( #1307, #155, #749 ), + ( #1923, #2526, #2541 ), + ( #3436, #3710, #171 ), + ( #725, #1592, #1910 ), + ( #433, #2920, #1891 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001924698808057212800, 0.003849397616114425600, 0.007698795232228851200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8164965809277262600, 1.000000000000000000), + ( 1.000000000000000000, 0.8041240654838628400, 1.000000000000000000), + ( 1.000000000000000000, 0.7926702635783996500, 1.000000000000000000), + ( 1.000000000000000000, 0.7719025772521622700, 1.000000000000000000), + ( 1.000000000000000000, 0.7625754468079514200, 1.000000000000000000), + ( 1.000000000000000000, 0.7373423233570557400, 1.000000000000000000), + ( 1.000000000000000000, 0.7241342231881088300, 1.000000000000000000), + ( 1.000000000000000000, 0.7130631886949772000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#733 = DIRECTION ( 'NONE', ( 4.007720081139350800E-016, -0.2588190451025143600, 0.9659258262890700900 ) ) ; +#734 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#735 = CARTESIAN_POINT ( 'NONE', ( 3.123886990226639100, 4.109413512850372800, 18.32519881038508900 ) ) ; +#736 = LINE ( 'NONE', #748, #703 ) ; +#737 = LINE ( 'NONE', #2244, #662 ) ; +#738 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -3.352704222757700000, 13.74548344466114500 ) ) ; +#739 = ORIENTED_EDGE ( 'NONE', *, *, #681, .T. ) ; +#740 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000000300, 4.999999999999992000, -24.44661701239527600 ) ) ; +#741 = CIRCLE ( 'NONE', #3808, 2.500000000000000000 ) ; +#742 = CARTESIAN_POINT ( 'NONE', ( 3.464575402698483000, -6.081356860737268600, 18.05630710620770100 ) ) ; +#743 = ADVANCED_FACE ( 'NONE', ( #203 ), #175, .F. ) ; +#744 = EDGE_CURVE ( 'NONE', #979, #1734, #2247, .T. ) ; +#745 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025143600, 0.9659258262890698700 ) ) ; +#746 = CIRCLE ( 'NONE', #724, 100.0000000000000000 ) ; +#747 = CARTESIAN_POINT ( 'NONE', ( 18.67379999999996400, 3.354751084655892300, 20.42893218813456700 ) ) ; +#748 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 10.00000000000000000, -7.500000000000000900 ) ) ; +#749 = CARTESIAN_POINT ( 'NONE', ( 5.014558704718544000, -9.999999999999998200, 13.41634289988367200 ) ) ; +#750 = VECTOR ( 'NONE', #1795, 1000.000000000000000 ) ; +#751 = CIRCLE ( 'NONE', #3818, 9.999999999999996400 ) ; +#752 = CARTESIAN_POINT ( 'NONE', ( 18.95549079479001300, 2.832085623939590400, 20.42893218813456700 ) ) ; +#753 = CIRCLE ( 'NONE', #3832, 10.00000000000000500 ) ; +#754 = ADVANCED_FACE ( 'NONE', ( #236 ), #2953, .T. ) ; +#755 = CIRCLE ( 'NONE', #2482, 5.000000000000000000 ) ; +#756 = EDGE_CURVE ( 'NONE', #3142, #1747, #173, .T. ) ; +#757 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 4.014749828072292600, 13.61697764103997300 ) ) ; +#758 = CARTESIAN_POINT ( 'NONE', ( 6.339372069904525700, 7.100102038077660700, 18.70376821350315700 ) ) ; +#759 = CARTESIAN_POINT ( 'NONE', ( 19.21066233607912500, 2.302328493910141400, 20.38127276860311100 ) ) ; +#760 = VECTOR ( 'NONE', #733, 999.9999999999998900 ) ; +#761 = CARTESIAN_POINT ( 'NONE', ( 19.23385741478656600, -6.784657414786567900, 18.59364585706216700 ) ) ; +#762 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000900, 5.008381691144632200, 13.42410956663136400 ) ) ; +#763 = EDGE_CURVE ( 'NONE', #3193, #1590, #178, .T. ) ; +#764 = CARTESIAN_POINT ( 'NONE', ( 19.48944861233107800, 1.468153203937836900, 20.31424176941650100 ) ) ; +#765 = CARTESIAN_POINT ( 'NONE', ( 24.89839999999999500, 5.997907696802578000, 13.20722971111319700 ) ) ; +#766 = CARTESIAN_POINT ( 'NONE', ( 14.96201839731483600, 8.281219051231797600, 18.88001408660871000 ) ) ; +#767 = CARTESIAN_POINT ( 'NONE', ( 19.56498765769936200, 1.183482559978655400, 20.29262752374366500 ) ) ; +#768 = CARTESIAN_POINT ( 'NONE', ( 12.44919999999999800, 12.65496680558646100, -55.06972082365662400 ) ) ; +#769 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 7.987988261658157000, 12.83796693380419100 ) ) ; +#770 = ADVANCED_FACE ( 'NONE', ( #166 ), #160, .F. ) ; +#771 = CARTESIAN_POINT ( 'NONE', ( 5.083537723363246400, -0.5995425802479312800, -25.30407115731308900 ) ) ; +#772 = CARTESIAN_POINT ( 'NONE', ( 19.66921662996756500, 0.5957004974828524800, 20.26158496133534100 ) ) ; +#773 = EDGE_CURVE ( 'NONE', #3647, #165, #156, .T. ) ; +#774 = EDGE_CURVE ( 'NONE', #3193, #3374, #1950, .T. ) ; +#775 = CIRCLE ( 'NONE', #3803, 10.00000000000000200 ) ; +#776 = CARTESIAN_POINT ( 'NONE', ( 2.449200000000012700, -4.374999999999910300, -1.172277716886070300 ) ) ; +#777 = CARTESIAN_POINT ( 'NONE', ( 14.21572941021749900, 8.460904434014411300, 18.85664821966107900 ) ) ; +#778 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3230, #3060, #2856, #2951, #2945, #1622, #2924, #2624 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001770824009146269100, 0.002656236013719403000, 0.003541648018292537300 ), + .UNSPECIFIED. ) ; +#779 = EDGE_CURVE ( 'NONE', #3693, #119, #198, .T. ) ; +#780 = ORIENTED_EDGE ( 'NONE', *, *, #680, .F. ) ; +#781 = LINE ( 'NONE', #917, #750 ) ; +#782 = CARTESIAN_POINT ( 'NONE', ( 3.333333333333329500, -4.913000608485467600, 18.24465176069333000 ) ) ; +#783 = ORIENTED_EDGE ( 'NONE', *, *, #2162, .F. ) ; +#784 = FACE_OUTER_BOUND ( 'NONE', #3697, .T. ) ; +#785 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 10.00000000000000000, -7.500000000000000900 ) ) ; +#786 = ORIENTED_EDGE ( 'NONE', *, *, #147, .F. ) ; +#787 = CIRCLE ( 'NONE', #936, 4.999999999999997300 ) ; +#788 = ADVANCED_FACE ( 'NONE', ( #131 ), #1163, .T. ) ; +#789 = CARTESIAN_POINT ( 'NONE', ( 14.16260539609275600, 10.00000000000000200, 15.18428817202345200 ) ) ; +#790 = CARTESIAN_POINT ( 'NONE', ( 19.55173965510788000, 7.102539655107884500, 18.37807876050471400 ) ) ; +#791 = FACE_BOUND ( 'NONE', #1971, .T. ) ; +#792 = CARTESIAN_POINT ( 'NONE', ( 18.67379999999996400, -3.354751084655891000, 20.42893218813456700 ) ) ; +#793 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#794 = FACE_OUTER_BOUND ( 'NONE', #3004, .T. ) ; +#795 = EDGE_CURVE ( 'NONE', #2, #3481, #124, .T. ) ; +#796 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2237, #2278, #2271, #2229, #2225, #2220, #2212, #2202 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.003891916060219528200, 0.005837874090329296000, 0.007783832120439065000 ), + .UNSPECIFIED. ) ; +#797 = LINE ( 'NONE', #3641, #1574 ) ; +#798 = EDGE_CURVE ( 'NONE', #2681, #3093, #135, .T. ) ; +#800 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 9.999423642752413200, 12.59359090277150600 ) ) ; +#799 = CIRCLE ( 'NONE', #1761, 5.000000000000000000 ) ; +#801 = DIRECTION ( 'NONE', ( -0.3535533905932738400, 0.0000000000000000000, -0.9354143466934852200 ) ) ; +#802 = CARTESIAN_POINT ( 'NONE', ( 22.44919999999999800, 7.773724697258101600, -46.51193553422098900 ) ) ; +#803 = VECTOR ( 'NONE', #2746, 999.9999999999998900 ) ; +#804 = CARTESIAN_POINT ( 'NONE', ( 10.20772266535381200, 20.89959174578871200, -60.28437125805455600 ) ) ; +#805 = ADVANCED_FACE ( 'NONE', ( #121 ), #331, .T. ) ; +#806 = CARTESIAN_POINT ( 'NONE', ( 3.359463895330888400, -6.203161991766667600, 17.99540134615853000 ) ) ; +#807 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 16.50000000000000000 ) ) ; +#808 = CARTESIAN_POINT ( 'NONE', ( 14.51643280196451400, 8.788189646938086200, 18.47554951505792400 ) ) ; +#809 = CARTESIAN_POINT ( 'NONE', ( 19.56024857413023800, -1.176555387325271000, 20.29381666077474800 ) ) ; +#810 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890700900, 0.2588190451025145200 ) ) ; +#811 = CARTESIAN_POINT ( 'NONE', ( 22.44919999999999800, 10.24015223986378800, -55.71676843641291300 ) ) ; +#812 = CARTESIAN_POINT ( 'NONE', ( 12.68326013871222100, 20.63028186734574400, -60.69723830286978500 ) ) ; +#813 = TOROIDAL_SURFACE ( 'NONE', #2879, 9.999999999999996400, 2.500000000000000000 ) ; +#814 = ORIENTED_EDGE ( 'NONE', *, *, #1780, .F. ) ; +#815 = VECTOR ( 'NONE', #2952, 1000.000000000000000 ) ; +#816 = CARTESIAN_POINT ( 'NONE', ( 19.69651271784130500, -5.892485388250618600E-012, 20.25268728215869300 ) ) ; +#817 = EDGE_CURVE ( 'NONE', #2594, #3823, #2665, .T. ) ; +#818 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#819 = ORIENTED_EDGE ( 'NONE', *, *, #1980, .F. ) ; +#820 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 9.999423642752413200, 12.59359090277150600 ) ) ; +#821 = CIRCLE ( 'NONE', #3026, 10.00000000000000200 ) ; +#822 = CARTESIAN_POINT ( 'NONE', ( 19.72072028901357400, 6.465048791062584700, 18.52842017660190200 ) ) ; +#823 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -2.312964634635743900E-016, -1.000000000000000000 ) ) ; +#824 = CARTESIAN_POINT ( 'NONE', ( 21.56506666666666700, -4.913000608485471200, 18.24465176069332300 ) ) ; +#825 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025143600 ) ) ; +#826 = ORIENTED_EDGE ( 'NONE', *, *, #3032, .T. ) ; +#827 = VECTOR ( 'NONE', #570, 1000.000000000000000 ) ; +#828 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 9.999807868217024200, 12.56826204476220000 ) ) ; +#829 = CARTESIAN_POINT ( 'NONE', ( 18.20864665766435000, -9.999999999999705100, 17.53233944198301200 ) ) ; +#830 = ORIENTED_EDGE ( 'NONE', *, *, #1623, .T. ) ; +#831 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 10.00000000000000200, 12.51759777210976300 ) ) ; +#832 = LINE ( 'NONE', #1737, #827 ) ; +#833 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#834 = FACE_BOUND ( 'NONE', #2342, .T. ) ; +#835 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 10.00000000000000200, 12.54292954420088800 ) ) ; +#836 = CARTESIAN_POINT ( 'NONE', ( 23.60179364420101300, 10.00000000000000000, 12.57593085889090100 ) ) ; +#837 = LINE ( 'NONE', #2033, #815 ) ; +#838 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -3.350964509047024400, 13.74582112792215000 ) ) ; +#839 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#840 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -4.999999999999998200, 7.499999999999998200 ) ) ; +#841 = CARTESIAN_POINT ( 'NONE', ( 16.90940847366133700, -7.673159582447538300, 18.87032528560175500 ) ) ; +#842 = FACE_OUTER_BOUND ( 'NONE', #2634, .T. ) ; +#843 = EDGE_CURVE ( 'NONE', #3510, #2091, #81, .T. ) ; +#844 = EDGE_CURVE ( 'NONE', #2790, #2155, #88, .T. ) ; +#845 = CARTESIAN_POINT ( 'NONE', ( 22.33875693515204500, 10.00000000000000200, 12.77686231459115300 ) ) ; +#846 = CIRCLE ( 'NONE', #2124, 2.499999999999999100 ) ; +#847 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 10.00000000000000200, 12.51759777210976300 ) ) ; +#848 = CARTESIAN_POINT ( 'NONE', ( 20.48218026335199200, 10.00000000000000200, 13.23958549484887300 ) ) ; +#849 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000600, -3.872438080701994200, 17.06844457568204000 ) ) ; +#850 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -3.061616997868381200E-016, 2.500000000000002200 ) ) ; +#851 = CARTESIAN_POINT ( 'NONE', ( 10.63226583723179400, 20.81155541110115000, -60.43194613632962800 ) ) ; +#852 = CARTESIAN_POINT ( 'NONE', ( 24.73498921925273900, -9.811804430347052600, 13.92610543845969300 ) ) ; +#853 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#854 = EDGE_CURVE ( 'NONE', #3374, #320, #82, .T. ) ; +#855 = CIRCLE ( 'NONE', #1702, 2.500000000000000900 ) ; +#856 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#857 = EDGE_CURVE ( 'NONE', #2346, #3656, #796, .T. ) ; +#858 = DIRECTION ( 'NONE', ( -3.591835788553866400E-016, -0.2588190451025151300, 0.9659258262890698700 ) ) ; +#859 = ORIENTED_EDGE ( 'NONE', *, *, #2711, .F. ) ; +#860 = EDGE_LOOP ( 'NONE', ( #3601, #3651, #3736, #3777, #1048 ) ) ; +#861 = EDGE_CURVE ( 'NONE', #1342, #3370, #1572, .T. ) ; +#862 = ORIENTED_EDGE ( 'NONE', *, *, #491, .F. ) ; +#863 = EDGE_LOOP ( 'NONE', ( #288, #326, #376, #421, #474 ) ) ; +#864 = CARTESIAN_POINT ( 'NONE', ( 8.748431914341523500, -9.999999999999998200, 14.69451307130786300 ) ) ; +#865 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000031400, 4.999999999999973400, 20.42893218813457100 ) ) ; +#866 = ADVANCED_FACE ( 'NONE', ( #78 ), #2119, .F. ) ; +#867 = ORIENTED_EDGE ( 'NONE', *, *, #773, .F. ) ; +#868 = EDGE_LOOP ( 'NONE', ( #2919, #2923, #2927, #2949, #2956, #2960 ) ) ; +#869 = CARTESIAN_POINT ( 'NONE', ( 19.86966727920894400, 10.00000000000000000, 13.42078292766085900 ) ) ; +#870 = ORIENTED_EDGE ( 'NONE', *, *, #843, .F. ) ; +#871 = CARTESIAN_POINT ( 'NONE', ( 24.89839999999999900, 8.988372880617703200, 12.68459017141276500 ) ) ; +#872 = VERTEX_POINT ( 'NONE', #2080 ) ; +#873 = DIRECTION ( 'NONE', ( 0.2002407675991828800, 0.0000000000000000000, 0.9797467198165502600 ) ) ; +#874 = ORIENTED_EDGE ( 'NONE', *, *, #1072, .F. ) ; +#875 = CARTESIAN_POINT ( 'NONE', ( 18.65395066283483800, 10.00000000000000200, 13.82272239761841000 ) ) ; +#876 = CARTESIAN_POINT ( 'NONE', ( 19.11586666666666900, 6.666666666666669600, 18.68082896311803200 ) ) ; +#878 = CARTESIAN_POINT ( 'NONE', ( 11.98804520621980400, 20.63007340772872000, -60.69751697428589000 ) ) ; +#877 = FACE_OUTER_BOUND ( 'NONE', #1999, .T. ) ; +#879 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #274, #2362, #565 ), + ( #2052, #6, #1722 ), + ( #3554, #1419, #3257 ), + ( #1130, #2962, #841 ), + ( #267, #2040, #2354 ), + ( #2663, #550, #3825 ), + ( #1712, #829, #1122 ), + ( #2948, #3243, #3544 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( -6.042041866827219100E-015, 0.002046501110068808700, 0.003069751665106233900, 0.004093002220143659500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9198317473328329100, 1.000000000000000000), + ( 1.000000000000000000, 0.9099784173013043500, 1.000000000000000000), + ( 1.000000000000000000, 0.8987980930244853200, 1.000000000000000000), + ( 1.000000000000000000, 0.8759986957842191800, 1.000000000000000000), + ( 1.000000000000000000, 0.8674092759744614900, 1.000000000000000000), + ( 1.000000000000000000, 0.8461836458336592400, 1.000000000000000000), + ( 1.000000000000000000, 0.8335262052137775200, 1.000000000000000000), + ( 1.000000000000000000, 0.8164965809277261500, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#880 = CARTESIAN_POINT ( 'NONE', ( 19.69651271784165700, 0.2956260051130891200, 20.25268728215857500 ) ) ; +#881 = LINE ( 'NONE', #1630, #2320 ) ; +#882 = EDGE_CURVE ( 'NONE', #1641, #320, #114, .T. ) ; +#883 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.999999999999998200, 12.51759777210975600 ) ) ; +#884 = CARTESIAN_POINT ( 'NONE', ( 11.52030114611470100, 20.67543025870993700, -60.63960764478823500 ) ) ; +#885 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2031, #2140, #2021 ), + ( #2014, #2008, #1997 ), + ( #1993, #1985, #1982 ), + ( #1970, #1960, #1954 ), + ( #1943, #1827, #1762 ), + ( #1743, #1703, #1638 ), + ( #1613, #1584, #1581 ), + ( #1565, #1560, #1479 ), + ( #2093, #1436, #1402 ), + ( #1379, #1370, #1314 ), + ( #1294, #1269, #1188 ), + ( #1169, #1150, #1125 ), + ( #1094, #1066, #1053 ), + ( #1035, #967, #951 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.03248127728004319300, 0.03513982119026749100, 0.03646909314537964000, 0.03779836510049178900, 0.03912763705560393800, 0.04045690901071608700, 0.04311545292094038500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865471300, 1.000000000000000000), + ( 1.000000000000000000, 0.7121407007395144100, 1.000000000000000000), + ( 1.000000000000000000, 0.7178127643425549200, 1.000000000000000000), + ( 1.000000000000000000, 0.7270591103844761300, 1.000000000000000000), + ( 1.000000000000000000, 0.7302880985125910200, 1.000000000000000000), + ( 1.000000000000000000, 0.7367881227216006600, 1.000000000000000000), + ( 1.000000000000000000, 0.7400660503195771700, 1.000000000000000000), + ( 1.000000000000000000, 0.7466174459470814600, 1.000000000000000000), + ( 1.000000000000000000, 0.7498910979961456200, 1.000000000000000000), + ( 1.000000000000000000, 0.7563690531120949000, 1.000000000000000000), + ( 1.000000000000000000, 0.7595495973077431900, 1.000000000000000000), + ( 1.000000000000000000, 0.7686201929833034200, 1.000000000000000000), + ( 1.000000000000000000, 0.7741313101779956400, 1.000000000000000000), + ( 1.000000000000000000, 0.7788216141172787900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#886 = CARTESIAN_POINT ( 'NONE', ( 9.830722693245290200, -8.255779359237708400, 18.88332220509628800 ) ) ; +#887 = CARTESIAN_POINT ( 'NONE', ( 17.14683859900244700, -5.302361400997488000, 20.42893218813456700 ) ) ; +#888 = EDGE_CURVE ( 'NONE', #1096, #3644, #68, .T. ) ; +#889 = EDGE_CURVE ( 'NONE', #1641, #2430, #35, .T. ) ; +#890 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.00000000000000400, -7.499999999999995600 ) ) ; +#891 = CARTESIAN_POINT ( 'NONE', ( 14.21572941021420700, 8.460904434022321400, 18.85664821965398700 ) ) ; +#892 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2262, #3791, #1078, #508 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001081607159478678800 ), + .UNSPECIFIED. ) ; +#893 = CARTESIAN_POINT ( 'NONE', ( 4.624705837374151900, 6.282183226029444800, 18.38011863062096700 ) ) ; +#894 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000100, 10.00000000000000200, 14.27124344467704900 ) ) ; +#895 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025144700, -0.9659258262890699800 ) ) ; +#896 = CARTESIAN_POINT ( 'NONE', ( 25.15290567487880600, -9.999999999999998200, 17.42727761131465400 ) ) ; +#897 = CARTESIAN_POINT ( 'NONE', ( 1.296606355798979500, -9.999999999999996400, 12.57593085889089400 ) ) ; +#898 = CARTESIAN_POINT ( 'NONE', ( 19.69651271784130500, -5.892485388250618600E-012, 20.25268728215869300 ) ) ; +#899 = EDGE_LOOP ( 'NONE', ( #1148, #1501, #1187, #1516, #1226, #1561, #1243, #1586 ) ) ; +#900 = CARTESIAN_POINT ( 'NONE', ( 18.05083687526160900, 10.00000000000000000, 14.04384608017587500 ) ) ; +#901 = CARTESIAN_POINT ( 'NONE', ( 5.782533333333336900, 6.666666666666668700, 18.68082896311803200 ) ) ; +#902 = VERTEX_POINT ( 'NONE', #2164 ) ; +#903 = ORIENTED_EDGE ( 'NONE', *, *, #1933, .T. ) ; +#904 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 1.734723475976807600E-016 ) ) ; +#905 = CARTESIAN_POINT ( 'NONE', ( 2.559643064847952700, -9.999999999999998200, 12.77686231459114900 ) ) ; +#906 = VERTEX_POINT ( 'NONE', #2046 ) ; +#907 = ORIENTED_EDGE ( 'NONE', *, *, #1597, .F. ) ; +#908 = EDGE_CURVE ( 'NONE', #2599, #1362, #27, .T. ) ; +#909 = CARTESIAN_POINT ( 'NONE', ( 19.88384129528201800, -9.999999999999998200, 13.41634289988367200 ) ) ; +#910 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Hammer_Slide', ( #1739, #1900 ), #1951 ) ; +#911 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999996900, -4.999999999999971600, 20.42893218813457100 ) ) ; +#912 = ORIENTED_EDGE ( 'NONE', *, *, #391, .F. ) ; +#913 = EDGE_LOOP ( 'NONE', ( #1285, #1600, #1317, #1612 ) ) ; +#914 = CARTESIAN_POINT ( 'NONE', ( 4.416219736648009200, -9.999999999999998200, 13.23958549484888000 ) ) ; +#915 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000000300, 10.00000000000000200, 14.27124344467704900 ) ) ; +#916 = EDGE_CURVE ( 'NONE', #2348, #1796, #32, .T. ) ; +#917 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 4.999999999999995600, 8.356123307600421000E-016 ) ) ; +#918 = VERTEX_POINT ( 'NONE', #1989 ) ; +#919 = EDGE_CURVE ( 'NONE', #1594, #1686, #21, .T. ) ; +#920 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -3.061616997868382300E-015, -12.50000000000000000 ) ) ; +#921 = CARTESIAN_POINT ( 'NONE', ( 11.40526348943795500, 10.00000000000000400, 15.32111431373016700 ) ) ; +#922 = CARTESIAN_POINT ( 'NONE', ( 16.78941635278175700, 24.13775104097513600, -62.40548395472667000 ) ) ; +#923 = VERTEX_POINT ( 'NONE', #1965 ) ; +#924 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.734723475976807600E-016, 1.000000000000000000 ) ) ; +#925 = ORIENTED_EDGE ( 'NONE', *, *, #817, .T. ) ; +#926 = CARTESIAN_POINT ( 'NONE', ( 5.028732720791066600, -9.999999999999998200, 13.42078292766086500 ) ) ; +#927 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 7.455127018922267400, 1.997595264191612600 ) ) ; +#928 = VECTOR ( 'NONE', #546, 1000.000000000000100 ) ; +#929 = ADVANCED_FACE ( 'NONE', ( #16, #70, #3248 ), #1906, .F. ) ; +#930 = CARTESIAN_POINT ( 'NONE', ( 6.244449337165168100, -10.00000000000000000, 13.82272239761841500 ) ) ; +#931 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.312964634635743900E-016, 1.000000000000000000 ) ) ; +#932 = VECTOR ( 'NONE', #34, 1000.000000000000000 ) ; +#933 = CARTESIAN_POINT ( 'NONE', ( 6.224600000000037900, -3.354751084655891000, 20.42893218813456700 ) ) ; +#934 = CARTESIAN_POINT ( 'NONE', ( 14.52704801017751100, 12.85412597396659600, -18.05566656711459200 ) ) ; +#935 = CIRCLE ( 'NONE', #3170, 2.500000000000000000 ) ; +#936 = AXIS2_PLACEMENT_3D ( 'NONE', #3609, #1475, #1781 ) ; +#937 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#938 = CARTESIAN_POINT ( 'NONE', ( 12.61322461325452000, 23.47154057233358800, -64.31011593326012100 ) ) ; +#939 = CYLINDRICAL_SURFACE ( 'NONE', #2210, 2.500000000000000000 ) ; +#940 = CARTESIAN_POINT ( 'NONE', ( 1.232595164407831400E-031, 4.999999999999997300, 7.499999999999996400 ) ) ; +#941 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1644, #1588, #1568, #1562 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 5.553457650952619700, 6.283185307179586200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9561149059751438100, 0.9561149059751438100, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#942 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -2.312964634635743900E-016 ) ) ; +#943 = EDGE_CURVE ( 'NONE', #1151, #3311, #3792, .T. ) ; +#944 = DIRECTION ( 'NONE', ( -1.734723475976806800E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#945 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#946 = AXIS2_PLACEMENT_3D ( 'NONE', #3365, #1240, #3078 ) ; +#947 = CARTESIAN_POINT ( 'NONE', ( 12.91367478374203500, 20.64092890584002000, -60.68321887616689700 ) ) ; +#948 = CARTESIAN_POINT ( 'NONE', ( 6.781308430968023200, 13.21760352614479400, -19.49938734347618700 ) ) ; +#949 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000720700, 5.806664120495949700, 17.06281136990528000 ) ) ; +#950 = CARTESIAN_POINT ( 'NONE', ( 5.834821722338498200, 24.01142209705481200, -59.79133915250319800 ) ) ; +#951 = CARTESIAN_POINT ( 'NONE', ( 7.504423536207163200, -1.521289633275705100, -23.61746698137077200 ) ) ; +#952 = CARTESIAN_POINT ( 'NONE', ( 13.60042759180820800, 20.70950525381132200, -60.58762870325475800 ) ) ; +#953 = CARTESIAN_POINT ( 'NONE', ( 8.491650014717967200, 8.229377242346977500, 18.63839610583425400 ) ) ; +#954 = ORIENTED_EDGE ( 'NONE', *, *, #200, .F. ) ; +#955 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1168, #311, #790 ), + ( #2615, #502, #2300 ), + ( #217, #1984, #3769 ), + ( #1657, #3491, #1357 ), + ( #1369, #3198, #1074 ), + ( #1668, #3796, #3511 ), + ( #3751, #1627, #1099 ), + ( #2934, #808, #2635 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 0.03756001926301488100, 0.03978849970606224100, 0.04201698014910960200, 0.04647394103520432300 ), + ( 0.0000000000000000000, 0.4629270918784362300 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9647617733530222700, 0.9621490062753217400), + ( 1.000000000000000000, 0.9680440911170205000, 0.9656746941691009000), + ( 1.000000000000000000, 0.9714210604429186500, 0.9693020516420958200), + ( 1.000000000000000000, 0.9778472595935829800, 0.9762047265741271600), + ( 1.000000000000000000, 0.9809018566001321800, 0.9794858091690206200), + ( 1.000000000000000000, 0.9892368525625445700, 0.9884388102104492100), + ( 1.000000000000000000, 0.9936706241870969500, 0.9932013274511397600), + ( 1.000000000000000000, 0.9964416651330569900, 0.9961778294898810900) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#956 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#957 = CARTESIAN_POINT ( 'NONE', ( 13.37205868850847400, 20.68049782767859300, -60.62853650564463900 ) ) ; +#958 = CARTESIAN_POINT ( 'NONE', ( 22.15011104579378900, -1.532431811596318900, 18.41048896650114500 ) ) ; +#959 = ORIENTED_EDGE ( 'NONE', *, *, #744, .F. ) ; +#960 = CARTESIAN_POINT ( 'NONE', ( 3.153123964129733300, -6.442232767083493300, 17.86805997513224800 ) ) ; +#961 = ORIENTED_EDGE ( 'NONE', *, *, #2032, .T. ) ; +#962 = PLANE ( 'NONE', #997 ) ; +#963 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#964 = CARTESIAN_POINT ( 'NONE', ( 24.86344176184014300, 9.953839850033318700, 13.27376668149446600 ) ) ; +#965 = ORIENTED_EDGE ( 'NONE', *, *, #1674, .F. ) ; +#966 = ORIENTED_EDGE ( 'NONE', *, *, #1745, .T. ) ; +#967 = CARTESIAN_POINT ( 'NONE', ( 8.523438789907976000, -0.6742693224719605900, -25.13342253093244600 ) ) ; +#968 = EDGE_CURVE ( 'NONE', #3186, #1685, #1524, .T. ) ; +#969 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#970 = VERTEX_POINT ( 'NONE', #1852 ) ; +#971 = CARTESIAN_POINT ( 'NONE', ( 3.051006016240491300, -6.560538726412136000, 17.80114242197733200 ) ) ; +#972 = CARTESIAN_POINT ( 'NONE', ( 13.34930616570163900, 11.03125286337649100, -20.89540096236420700 ) ) ; +#973 = ORIENTED_EDGE ( 'NONE', *, *, #313, .F. ) ; +#974 = ORIENTED_EDGE ( 'NONE', *, *, #631, .F. ) ; +#975 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#976 = CARTESIAN_POINT ( 'NONE', ( 21.56506666666666700, -4.913000608485471200, 18.24465176069331600 ) ) ; +#977 = CARTESIAN_POINT ( 'NONE', ( 2.449200000000004700, 12.93374564363917600, -28.10814606143646400 ) ) ; +#978 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #1470, #1302, ( #1729 ) ) ; +#979 = VERTEX_POINT ( 'NONE', #1740 ) ; +#980 = CARTESIAN_POINT ( 'NONE', ( 21.49081050271625100, -5.263558899163273400, 18.20335045468318900 ) ) ; +#981 = LINE ( 'NONE', #3367, #1571 ) ; +#982 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 22.50000000000000400 ) ) ; +#983 = CARTESIAN_POINT ( 'NONE', ( 2.747620257776446400, -6.911642469695012300, 17.59070563490341900 ) ) ; +#984 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000004700, -9.999999999999998200, 14.27124344467705300 ) ) ; +#985 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -3.061616997868382300E-015, -12.50000000000000000 ) ) ; +#986 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.881784197001252300E-016, 1.000000000000000000 ) ) ; +#987 = EDGE_CURVE ( 'NONE', #2192, #2628, #1873, .T. ) ; +#988 = PLANE ( 'NONE', #3202 ) ; +#989 = CARTESIAN_POINT ( 'NONE', ( 2.549281361054621900, -7.140649096059294500, 17.43758861377709100 ) ) ; +#990 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.838808320239663900E-032, 1.060000827627150900E-016 ) ) ; +#991 = EDGE_CURVE ( 'NONE', #3656, #2736, #3304, .T. ) ; +#992 = DIRECTION ( 'NONE', ( -9.251858538542967900E-016, -0.2588190451025144100, 0.9659258262890699800 ) ) ; +#993 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#994 = CARTESIAN_POINT ( 'NONE', ( 8.480510561772385700, 6.100011023493129500, 20.23211946412476400 ) ) ; +#995 = CARTESIAN_POINT ( 'NONE', ( 6.844057217892992800, -9.999999999999998200, 14.04252096809152700 ) ) ; +#996 = ORIENTED_EDGE ( 'NONE', *, *, #313, .T. ) ; +#997 = AXIS2_PLACEMENT_3D ( 'NONE', #1024, #3147, #1316 ) ; +#998 = CARTESIAN_POINT ( 'NONE', ( 21.41165688879032600, -5.612531535564324200, 18.15900926220602300 ) ) ; +#999 = VERTEX_POINT ( 'NONE', #1678 ) ; +#1000 = EDGE_LOOP ( 'NONE', ( #1800, #1837, #1844, #1857, #1896, #1914, #1915, #1949 ) ) ; +#1001 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9659258262890699800, -0.2588190451025143600 ) ) ; +#1002 = CARTESIAN_POINT ( 'NONE', ( 1.965846866013418300, -7.810752519511572300, 16.93736690769642900 ) ) ; +#1003 = ORIENTED_EDGE ( 'NONE', *, *, #147, .T. ) ; +#1004 = VERTEX_POINT ( 'NONE', #1661 ) ; +#1005 = CARTESIAN_POINT ( 'NONE', ( 6.847563124738392100, -9.999999999999998200, 14.04384608017587700 ) ) ; +#1006 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #403, #325, #317 ), + ( #314, #308, #295 ), + ( #290, #281, #272 ), + ( #259, #244, #237 ), + ( #235, #230, #218 ), + ( #214, #205, #199 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.003051067943565614700, 0.006102135887131229400 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8164965809277260300, 1.000000000000000000), + ( 1.000000000000000000, 0.8021346805479675500, 1.000000000000000000), + ( 1.000000000000000000, 0.7862227654680678000, 1.000000000000000000), + ( 1.000000000000000000, 0.7563599117503221300, 1.000000000000000000), + ( 1.000000000000000000, 0.7423321108457324700, 1.000000000000000000), + ( 1.000000000000000000, 0.7298355860922887100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1007 = CARTESIAN_POINT ( 'NONE', ( 12.44919999999999800, 12.65496680558646100, -55.06972082365662400 ) ) ; +#1008 = CARTESIAN_POINT ( 'NONE', ( 21.32942369399698300, -5.960521729848157000, 18.11286642393776700 ) ) ; +#1009 = CARTESIAN_POINT ( 'NONE', ( 6.689164988511541000, -1.290510785738295600, -24.03080238887590500 ) ) ; +#1010 = CARTESIAN_POINT ( 'NONE', ( 6.237485155608099200, -9.999999999999998200, 13.82017794451305000 ) ) ; +#1011 = ORIENTED_EDGE ( 'NONE', *, *, #3110, .T. ) ; +#1012 = VERTEX_POINT ( 'NONE', #1721 ) ; +#1013 = AXIS2_PLACEMENT_3D ( 'NONE', #255, #248, #241 ) ; +#1014 = ORIENTED_EDGE ( 'NONE', *, *, #1158, .F. ) ; +#1015 = EDGE_CURVE ( 'NONE', #3502, #509, #3625, .T. ) ; +#1016 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -10.00000000000000400, -7.499999999999995600 ) ) ; +#1017 = ORIENTED_EDGE ( 'NONE', *, *, #1866, .T. ) ; +#1018 = CARTESIAN_POINT ( 'NONE', ( 1.590053579175372700, -8.237011157283735200, 16.54821306897239800 ) ) ; +#1019 = ORIENTED_EDGE ( 'NONE', *, *, #1623, .F. ) ; +#1020 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000004700, -9.999999999999998200, 14.27124344467705300 ) ) ; +#1021 = CARTESIAN_POINT ( 'NONE', ( 13.49313651056205600, -9.999999999999998200, 15.32111431373024000 ) ) ; +#1022 = CARTESIAN_POINT ( 'NONE', ( 8.090640351397622600, -9.999999999999998200, 14.51368510905990800 ) ) ; +#1023 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#1024 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999996700, 4.999999999999995600, -2.698454273810511800E-017 ) ) ; +#1025 = CYLINDRICAL_SURFACE ( 'NONE', #1346, 100.0000000000000000 ) ; +#1026 = CIRCLE ( 'NONE', #3161, 6.123724356957925600 ) ; +#1027 = CARTESIAN_POINT ( 'NONE', ( 8.747024140724992200, -9.999999999999994700, 14.69981776350337000 ) ) ; +#1029 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.00000000000000400, -7.499999999999995600 ) ) ; +#1028 = CIRCLE ( 'NONE', #2306, 4.999999999999997300 ) ; +#1030 = CARTESIAN_POINT ( 'NONE', ( 1.081733112532692600, -8.804788472915877400, 15.87577581703576800 ) ) ; +#1031 = CARTESIAN_POINT ( 'NONE', ( 22.13228994372736800, -1.750846578510625100, 18.40604335237569700 ) ) ; +#1032 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1033 = ADVANCED_FACE ( 'NONE', ( #2113 ), #2932, .T. ) ; +#1034 = CARTESIAN_POINT ( 'NONE', ( 3.568976306003019100, 5.960521729848161400, 18.11286642393776700 ) ) ; +#1035 = CARTESIAN_POINT ( 'NONE', ( 8.740617652155373600, 1.223557112464059000, -24.49699116221560000 ) ) ; +#1036 = EDGE_CURVE ( 'NONE', #1151, #3186, #941, .T. ) ; +#1037 = CARTESIAN_POINT ( 'NONE', ( 12.44919999999999800, 10.24015223986378800, -55.71676843641291300 ) ) ; +#1038 = CARTESIAN_POINT ( 'NONE', ( 17.40998370824612700, 14.11082393428810100, -60.50305359653262400 ) ) ; +#1039 = CARTESIAN_POINT ( 'NONE', ( 0.9209043299138223200, -8.982926417332690100, 15.63598149426652400 ) ) ; +#1040 = CARTESIAN_POINT ( 'NONE', ( 20.78572773313452900, -0.7234044214951940200, 19.14002803581066600 ) ) ; +#1041 = EDGE_CURVE ( 'NONE', #1552, #1842, #1303, .T. ) ; +#1042 = CARTESIAN_POINT ( 'NONE', ( 17.05963350260902400, 14.19079380107873900, -60.80150520246996800 ) ) ; +#1043 = ORIENTED_EDGE ( 'NONE', *, *, #2070, .T. ) ; +#1044 = ORIENTED_EDGE ( 'NONE', *, *, #861, .F. ) ; +#1045 = ORIENTED_EDGE ( 'NONE', *, *, #2209, .F. ) ; +#1046 = CARTESIAN_POINT ( 'NONE', ( 10.06917332149465900, -9.999999999999998200, 15.03673185473742000 ) ) ; +#1047 = ADVANCED_FACE ( 'NONE', ( #530 ), #1442, .T. ) ; +#1048 = ORIENTED_EDGE ( 'NONE', *, *, #291, .T. ) ; +#1049 = CARTESIAN_POINT ( 'NONE', ( 16.69280651674823400, 14.32486306764735000, -61.04130299497530400 ) ) ; +#1050 = ORIENTED_EDGE ( 'NONE', *, *, #1927, .T. ) ; +#1051 = CARTESIAN_POINT ( 'NONE', ( 14.16258672849642300, 10.00000000000000200, 15.18429198854280100 ) ) ; +#1052 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #707, #719, #700 ), + ( #695, #683, #676 ), + ( #672, #663, #656 ), + ( #644, #629, #620 ), + ( #596, #589, #584 ), + ( #577, #572, #563 ), + ( #549, #543, #537 ), + ( #524, #513, #506 ), + ( #501, #493, #484 ), + ( #478, #471, #464 ), + ( #457, #452, #445 ), + ( #439, #430, #424 ), + ( #416, #410, #405 ), + ( #402, #3720, #3715 ), + ( #3706, #395, #389 ), + ( #378, #374, #366 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.02721926891903510600, 0.03071446079791518400, 0.03246205673735522200, 0.03420965267679526600, 0.03595724861623530300, 0.03683104658595531800, 0.03770484455567534000, 0.04120003643455542200 ), + ( 0.4779393437612453600, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 0.9620138577402435100, 0.9602604987896410400, 1.000000000000000000), + ( 0.9667287365102050800, 0.9651930062631382000, 1.000000000000000000), + ( 0.9707214600911024900, 0.9693700254110868600, 1.000000000000000000), + ( 0.9749212641755524700, 0.9737636834550123000, 1.000000000000000000), + ( 0.9760244399702957500, 0.9749177794811538800, 1.000000000000000000), + ( 0.9775250483553479300, 0.9764876527345702800, 1.000000000000000000), + ( 0.9779036900715366600, 0.9768837717412299800, 1.000000000000000000), + ( 0.9779061505883706000, 0.9768863458302499100, 1.000000000000000000), + ( 0.9775326427763296700, 0.9764955976977554000, 1.000000000000000000), + ( 0.9764232917779538400, 0.9753350414338100000, 1.000000000000000000), + ( 0.9759598682305465900, 0.9748502272482272300, 1.000000000000000000), + ( 0.9748653479862396900, 0.9737051862941876700, 1.000000000000000000), + ( 0.9742362084816924600, 0.9730470070578894900, 1.000000000000000000), + ( 0.9707192519566199000, 0.9693677153538470300, 1.000000000000000000), + ( 0.9667143840502776500, 0.9651779913244071800, 1.000000000000000000), + ( 0.9620138577402435100, 0.9602604987896410400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1053 = CARTESIAN_POINT ( 'NONE', ( 6.726792261699411100, -1.304141690139948500, -24.00610775571086500 ) ) ; +#1054 = VERTEX_POINT ( 'NONE', #1336 ) ; +#1055 = VERTEX_POINT ( 'NONE', #1328 ) ; +#1056 = CARTESIAN_POINT ( 'NONE', ( 14.26640806785862400, 20.81160807137693100, -60.43185957277798100 ) ) ; +#1057 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9659258262890700900, -0.2588190451025145200 ) ) ; +#1058 = ORIENTED_EDGE ( 'NONE', *, *, #388, .F. ) ; +#1059 = EDGE_CURVE ( 'NONE', #2599, #1749, #2751, .T. ) ; +#1060 = ORIENTED_EDGE ( 'NONE', *, *, #583, .F. ) ; +#1061 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.40741737109300400, -20.21665475151220500 ) ) ; +#1062 = ORIENTED_EDGE ( 'NONE', *, *, #1354, .T. ) ; +#1063 = VECTOR ( 'NONE', #2364, 1000.000000000000000 ) ; +#1064 = EDGE_CURVE ( 'NONE', #1012, #1798, #443, .T. ) ; +#1065 = CARTESIAN_POINT ( 'NONE', ( 15.92198693163701300, 14.62960470052504600, -61.43836642473788600 ) ) ; +#1066 = CARTESIAN_POINT ( 'NONE', ( 7.914604919289455900, -0.4947373741433548900, -25.47068714932468600 ) ) ; +#1067 = CIRCLE ( 'NONE', #2884, 5.000000000000000000 ) ; +#1068 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 110.0000000000000000, 5.665249758739244100 ) ) ; +#1069 = CARTESIAN_POINT ( 'NONE', ( 15.51677964642252900, 14.80229880413828700, -61.59448304486966200 ) ) ; +#1070 = ADVANCED_FACE ( 'NONE', ( #2843 ), #1205, .T. ) ; +#1071 = PERSON_AND_ORGANIZATION ( #2275, #3296 ) ; +#1072 = EDGE_CURVE ( 'NONE', #2430, #1055, #459, .T. ) ; +#1073 = CARTESIAN_POINT ( 'NONE', ( 14.69067733464619100, 15.12273526737223700, -61.83227528623669400 ) ) ; +#1074 = CARTESIAN_POINT ( 'NONE', ( 17.73173394600837200, 7.870101936362930300, 18.55141497147176800 ) ) ; +#1075 = CARTESIAN_POINT ( 'NONE', ( 10.73579460390689800, -9.999999999999998200, 15.18428817202338100 ) ) ; +#1076 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1077 = CARTESIAN_POINT ( 'NONE', ( 14.26613416276820200, 15.27276440880525700, -61.91606071243951000 ) ) ; +#1078 = CARTESIAN_POINT ( 'NONE', ( 3.486743111209672300, -5.612531535564322400, 18.15900926220602300 ) ) ; +#1079 = EDGE_CURVE ( 'NONE', #1055, #1913, #2023, .T. ) ; +#1080 = EDGE_CURVE ( 'NONE', #119, #3693, #3533, .T. ) ; +#1081 = ADVANCED_FACE ( 'NONE', ( #1925 ), #988, .F. ) ; +#1082 = ORIENTED_EDGE ( 'NONE', *, *, #1282, .T. ) ; +#1083 = CARTESIAN_POINT ( 'NONE', ( 13.37809885388530000, 15.49448300309939000, -62.02783827795727900 ) ) ; +#1084 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -4.999999999999998200, 14.27124344467705100 ) ) ; +#1085 = CARTESIAN_POINT ( 'NONE', ( 11.40526348944505300, -9.999999999999998200, 15.32111431373162300 ) ) ; +#1086 = VERTEX_POINT ( 'NONE', #1029 ) ; +#1087 = ORIENTED_EDGE ( 'NONE', *, *, #1983, .F. ) ; +#1088 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1089 = AXIS2_PLACEMENT_3D ( 'NONE', #1311, #1256, #1213 ) ; +#1090 = CARTESIAN_POINT ( 'NONE', ( 12.91035479378019900, 15.56271785303361300, -62.05531080292777800 ) ) ; +#1091 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000030500, 4.999999999999975100, 20.42893218813456700 ) ) ; +#1092 = VERTEX_POINT ( 'NONE', #898 ) ; +#1093 = ORIENTED_EDGE ( 'NONE', *, *, #2424, .F. ) ; +#1094 = CARTESIAN_POINT ( 'NONE', ( 8.157376692203133200, 1.417514824314321900, -24.78852767895462300 ) ) ; +#1095 = ORIENTED_EDGE ( 'NONE', *, *, #1649, .F. ) ; +#1096 = VERTEX_POINT ( 'NONE', #915 ) ; +#1097 = CARTESIAN_POINT ( 'NONE', ( 6.689753342335589700, -10.00000000000028400, 17.53233944198226300 ) ) ; +#1098 = CARTESIAN_POINT ( 'NONE', ( 14.69136374979210700, 20.89973775983623100, -60.28416201532461800 ) ) ; +#1099 = CARTESIAN_POINT ( 'NONE', ( 15.74417468684613100, 8.775155475108134000, 18.36403316461007100 ) ) ; +#1100 = VERTEX_POINT ( 'NONE', #1166 ) ; +#1101 = CARTESIAN_POINT ( 'NONE', ( 14.21572941021854900, -8.460904434018122100, 18.85664821965721300 ) ) ; +#1102 = EDGE_CURVE ( 'NONE', #1054, #2992, #1525, .T. ) ; +#1103 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1104 = ORIENTED_EDGE ( 'NONE', *, *, #2860, .F. ) ; +#1105 = CARTESIAN_POINT ( 'NONE', ( 12.21513986128777200, 15.56239798600155100, -62.05517369621062300 ) ) ; +#1106 = VERTEX_POINT ( 'NONE', #865 ) ; +#1107 = CARTESIAN_POINT ( 'NONE', ( 90.32016550602631400, -4.374999999999900500, -1.172277716886104300 ) ) ; +#1108 = CARTESIAN_POINT ( 'NONE', ( 16.04214561684159400, 6.524255011832941000, 20.06062420243681300 ) ) ; +#1109 = EDGE_CURVE ( 'NONE', #3183, #3486, #1469, .T. ) ; +#1110 = APPROVAL_PERSON_ORGANIZATION ( #348, #1819, #1359 ) ; +#1111 = CARTESIAN_POINT ( 'NONE', ( 13.62941532043802800, -8.509720309396083600, 18.92869372267618300 ) ) ; +#1112 = CIRCLE ( 'NONE', #2661, 7.499999999999995600 ) ; +#1113 = EDGE_CURVE ( 'NONE', #2681, #3467, #3076, .T. ) ; +#1115 = CARTESIAN_POINT ( 'NONE', ( 11.98472521625796400, 15.54616766683900100, -62.04835603578654700 ) ) ; +#1114 = LINE ( 'NONE', #2575, #1251 ) ; +#1116 = CARTESIAN_POINT ( 'NONE', ( 23.25134047251658100, 10.00000000000000200, 17.27481323466015100 ) ) ; +#1117 = CARTESIAN_POINT ( 'NONE', ( 20.78526189323750700, 0.7300460583497961900, 19.14001546534314700 ) ) ; +#1118 = DIRECTION ( 'NONE', ( 4.007720081139351300E-016, -0.2588190451025144100, 0.9659258262890700900 ) ) ; +#1119 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2759, #2096, #1468, #3302, #1176, #3014, #886, #2713 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 8.673617379884035500E-019, 0.001305569381220835800, 0.002611138762441670800, 0.005222277524883345100 ), + .UNSPECIFIED. ) ; +#1120 = CYLINDRICAL_SURFACE ( 'NONE', #2277, 100.0000000000000000 ) ; +#1121 = CARTESIAN_POINT ( 'NONE', ( 11.52634131149151900, 15.48455879006531100, -62.02078417469442700 ) ) ; +#1122 = CARTESIAN_POINT ( 'NONE', ( 18.62350626937541900, -6.945078274142807700, 18.76169400471146200 ) ) ; +#1123 = CARTESIAN_POINT ( 'NONE', ( 14.48169538354525800, 8.202839060355644900, 19.05490808386720800 ) ) ; +#1124 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2863, #2772, #2660, #2651 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.636836746139535200E-016, 7.599531627337101100E-005 ), + .UNSPECIFIED. ) ; +#1125 = CARTESIAN_POINT ( 'NONE', ( 6.028134907260749700, -1.045185100884458800, -24.47552451716508800 ) ) ; +#1126 = CARTESIAN_POINT ( 'NONE', ( 11.29797240819178900, 15.43898372094100500, -61.99986069167815100 ) ) ; +#1127 = CARTESIAN_POINT ( 'NONE', ( 13.03658654612280200, -8.535603303660309400, 18.96456423728269100 ) ) ; +#1128 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#1129 = CARTESIAN_POINT ( 'NONE', ( 10.63199193214137500, 15.27267552189284100, -61.91601207634267500 ) ) ; +#1130 = CARTESIAN_POINT ( 'NONE', ( 15.82083856390249500, -9.999999999999998200, 14.78404628562253900 ) ) ; +#1131 = ORIENTED_EDGE ( 'NONE', *, *, #1706, .F. ) ; +#1132 = CARTESIAN_POINT ( 'NONE', ( 11.85695430277657700, -8.535464221751507100, 18.96436754574504500 ) ) ; +#1133 = EDGE_CURVE ( 'NONE', #3486, #3148, #1731, .T. ) ; +#1134 = EDGE_CURVE ( 'NONE', #872, #1547, #1814, .T. ) ; +#1135 = ORIENTED_EDGE ( 'NONE', *, *, #1833, .F. ) ; +#1136 = CARTESIAN_POINT ( 'NONE', ( 10.20703625020788500, 15.12250419413280900, -61.83216708374080600 ) ) ; +#1137 = EDGE_LOOP ( 'NONE', ( #2867, #552, #1324, #2954 ) ) ; +#1138 = PLANE ( 'NONE', #2784 ) ; +#1139 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -4.999999999999997300, 7.499999999999998200 ) ) ; +#1140 = ORIENTED_EDGE ( 'NONE', *, *, #2683, .F. ) ; +#1141 = ORIENTED_EDGE ( 'NONE', *, *, #1080, .F. ) ; +#1142 = CARTESIAN_POINT ( 'NONE', ( 9.379471739277617500, 14.80143007828703000, -61.59377488193290900 ) ) ; +#1143 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000001300, -9.994186870122497600, 12.93880870483233600 ) ) ; +#1144 = CARTESIAN_POINT ( 'NONE', ( 15.52087353075704900, 7.105152569017898000, 19.76776087404588700 ) ) ; +#1145 = ORIENTED_EDGE ( 'NONE', *, *, #795, .T. ) ; +#1146 = EDGE_LOOP ( 'NONE', ( #2297, #2345, #2386, #2442, #2492 ) ) ; +#1147 = ORIENTED_EDGE ( 'NONE', *, *, #1492, .T. ) ; +#1148 = ORIENTED_EDGE ( 'NONE', *, *, #1723, .F. ) ; +#1149 = CARTESIAN_POINT ( 'NONE', ( 8.974296369080516200, 14.62874440608542600, -61.43737320303539200 ) ) ; +#1150 = CARTESIAN_POINT ( 'NONE', ( 7.380710258763286000, -0.2826863024879389700, -25.87375807487085000 ) ) ; +#1151 = VERTEX_POINT ( 'NONE', #740 ) ; +#1152 = CIRCLE ( 'NONE', #2753, 9.999999999999996400 ) ; +#1153 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000004700, 12.93374564363918300, -28.10814606143646400 ) ) ; +#1154 = CARTESIAN_POINT ( 'NONE', ( 15.92410363091947500, 21.12994933929979500, -59.69538059135142300 ) ) ; +#1155 = CARTESIAN_POINT ( 'NONE', ( 11.40526348944505300, -4.999999999999998200, 15.32111431373162200 ) ) ; +#1156 = FACE_OUTER_BOUND ( 'NONE', #1917, .T. ) ; +#1157 = ADVANCED_FACE ( 'NONE', ( #842 ), #1052, .F. ) ; +#1158 = EDGE_CURVE ( 'NONE', #1558, #197, #3249, .T. ) ; +#1159 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025143600, -0.9659258262890700900 ) ) ; +#1160 = CARTESIAN_POINT ( 'NONE', ( 22.44919999999999800, 10.00000000000000200, 27.50000000000000400 ) ) ; +#1161 = FACE_OUTER_BOUND ( 'NONE', #899, .T. ) ; +#1162 = CARTESIAN_POINT ( 'NONE', ( 8.205548109699535100, 14.32486865794716900, -61.04118221942187000 ) ) ; +#1163 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #521, #603, #26 ), + ( #3824, #9, #3490 ), + ( #3833, #3816, #3810 ), + ( #3806, #3800, #3795 ), + ( #3782, #3774, #3768 ), + ( #3764, #3756, #3750 ), + ( #3743, #3737, #3729 ), + ( #3700, #3695, #3689 ), + ( #3682, #3674, #3667 ), + ( #3653, #3646, #3642 ), + ( #3633, #3629, #3622 ), + ( #3616, #3608, #3603 ), + ( #3588, #3581, #3575 ), + ( #3566, #3559, #3553 ), + ( #3547, #3543, #3531 ), + ( #3523, #3509, #3500 ), + ( #3497, #3495, #3485 ), + ( #3478, #3470, #3457 ), + ( #3453, #3447, #3433 ), + ( #3426, #3415, #3410 ), + ( #3405, #3402, #3395 ), + ( #3388, #3378, #3371 ), + ( #3361, #3358, #3353 ), + ( #3347, #3337, #3330 ), + ( #3320, #3314, #3301 ), + ( #3292, #3286, #3277 ), + ( #3269, #3263, #3259 ), + ( #3256, #3250, #3241 ), + ( #3233, #3226, #3218 ), + ( #3214, #3208, #3203 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 1.301042606982605300E-018, 0.001821963092897932800, 0.002732944639346898500, 0.003643926185795864400, 0.004554907732244830300, 0.005465889278693796200, 0.006376870825142762000, 0.007287852371591727900, 0.008198833918040692900, 0.009109815464489658800, 0.01002079701093862500, 0.01093177855738759100, 0.01184276010383655600, 0.01275374165028552200, 0.01457570474318345400 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865471300, 1.000000000000000000), + ( 1.000000000000000000, 0.6772915413242119900, 1.000000000000000000), + ( 1.000000000000000000, 0.6445454458859702900, 1.000000000000000000), + ( 1.000000000000000000, 0.5939629448187183600, 1.000000000000000000), + ( 1.000000000000000000, 0.5767908629398224000, 1.000000000000000000), + ( 1.000000000000000000, 0.5429432263404505600, 1.000000000000000000), + ( 1.000000000000000000, 0.5263376991091034400, 1.000000000000000000), + ( 1.000000000000000000, 0.4945572982868019500, 1.000000000000000000), + ( 1.000000000000000000, 0.4793791521783168900, 1.000000000000000000), + ( 1.000000000000000000, 0.4515220704858861600, 1.000000000000000000), + ( 1.000000000000000000, 0.4388431758426949400, 1.000000000000000000), + ( 1.000000000000000000, 0.4173988080497155200, 1.000000000000000000), + ( 1.000000000000000000, 0.4086260181189153600, 1.000000000000000000), + ( 1.000000000000000000, 0.3968354681866030400, 1.000000000000000000), + ( 1.000000000000000000, 0.3937730349076533600, 1.000000000000000000), + ( 1.000000000000000000, 0.3937573777454569400, 1.000000000000000000), + ( 1.000000000000000000, 0.3968041983469664000, 1.000000000000000000), + ( 1.000000000000000000, 0.4085676386354895600, 1.000000000000000000), + ( 1.000000000000000000, 0.4173265843854729300, 1.000000000000000000), + ( 1.000000000000000000, 0.4387620092567429700, 1.000000000000000000), + ( 1.000000000000000000, 0.4514458673447981400, 1.000000000000000000), + ( 1.000000000000000000, 0.4793357291210183500, 1.000000000000000000), + ( 1.000000000000000000, 0.4945415424113459600, 1.000000000000000000), + ( 1.000000000000000000, 0.5263987182471643300, 1.000000000000000000), + ( 1.000000000000000000, 0.5430665799314889900, 1.000000000000000000), + ( 1.000000000000000000, 0.5770027115287671400, 1.000000000000000000), + ( 1.000000000000000000, 0.5940619912629264700, 1.000000000000000000), + ( 1.000000000000000000, 0.6445417317129033000, 1.000000000000000000), + ( 1.000000000000000000, 0.6772647162893182800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865452400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1164 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -4.374999999999900500, -1.172277716886104300 ) ) ; +#1165 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.999999999999998200, 12.51759777210975600 ) ) ; +#1166 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -8.074441630149920000, -13.39944000404295300 ) ) ; +#1167 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3434, #3416, #3150, #3145, #3136, #3133, #3130, #3128, #3123, #3097, #3091, #3074, #3066, #3048 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 8.673617379884034500E-019, 0.001611057602984112200, 0.002416586404476167900, 0.003222115205968223600, 0.004833172808952322000, 0.005638701610444370700, 0.006444230411936419400 ), + .UNSPECIFIED. ) ; +#1168 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999996900, 4.999999999999971600, 20.42893218813456700 ) ) ; +#1169 = CARTESIAN_POINT ( 'NONE', ( 7.633401180553131700, 1.648422377470393700, -25.14085142872310600 ) ) ; +#1170 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025144700, 0.9659258262890698700 ) ) ; +#1171 = CARTESIAN_POINT ( 'NONE', ( 0.6777782580983188200, 10.00000000000335200, 17.31375120602433500 ) ) ; +#1172 = ADVANCED_FACE ( 'NONE', ( #95 ), #2463, .T. ) ; +#1173 = CARTESIAN_POINT ( 'NONE', ( 10.68267058978555200, -8.460904434022083400, 18.85664821965416800 ) ) ; +#1174 = EDGE_LOOP ( 'NONE', ( #283, #2638, #1095 ) ) ; +#1175 = EDGE_CURVE ( 'NONE', #923, #1662, #184, .T. ) ; +#1176 = CARTESIAN_POINT ( 'NONE', ( 7.751878873033161800, -7.586135167415649900, 18.86242405612950900 ) ) ; +#1177 = AXIS2_PLACEMENT_3D ( 'NONE', #2421, #2404, #2385 ) ; +#1178 = ORIENTED_EDGE ( 'NONE', *, *, #414, .F. ) ; +#1179 = ORIENTED_EDGE ( 'NONE', *, *, #1313, .T. ) ; +#1180 = CARTESIAN_POINT ( 'NONE', ( 5.005222153285765300, 4.150628690663878300, -29.37068897333182300 ) ) ; +#1181 = EDGE_CURVE ( 'NONE', #2823, #2453, #1618, .T. ) ; +#1182 = ORIENTED_EDGE ( 'NONE', *, *, #470, .F. ) ; +#1183 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000000300, 0.9419352036700234800, -25.37244181637519000 ) ) ; +#1184 = EDGE_LOOP ( 'NONE', ( #3649, #3654, #3685, #3688 ) ) ; +#1185 = CARTESIAN_POINT ( 'NONE', ( 10.68267058978233100, -8.460904434014370400, 18.85664821966107900 ) ) ; +#1186 = CARTESIAN_POINT ( 'NONE', ( 6.237485155608094800, 10.00000000000000200, 13.82017794451360800 ) ) ; +#1187 = ORIENTED_EDGE ( 'NONE', *, *, #798, .F. ) ; +#1188 = CARTESIAN_POINT ( 'NONE', ( 5.095179406035946100, -0.6056405821807220300, -25.29263054673605300 ) ) ; +#1189 = AXIS2_PLACEMENT_3D ( 'NONE', #2259, #2228, #2219 ) ; +#1190 = CARTESIAN_POINT ( 'NONE', ( 7.839118391783388000, 14.19087412341692000, -60.80180496951688700 ) ) ; +#1191 = EDGE_LOOP ( 'NONE', ( #289, #3746, #3591, #3561, #3662, #3772, #3784, #3738, #3515, #1855 ) ) ; +#1192 = CARTESIAN_POINT ( 'NONE', ( 24.22142619904358400, -5.242566062033293200, 17.54727368663203500 ) ) ; +#1193 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2026, #2509, #972, #613, #494, #351, #322, #297, #219, #238 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.005392838741401301100, 0.006740523553231670500, 0.008088208365062039100, 0.009435893176892407700, 0.01078357798872277800 ), + .UNSPECIFIED. ) ; +#1194 = VERTEX_POINT ( 'NONE', #279 ) ; +#1195 = CARTESIAN_POINT ( 'NONE', ( 21.56506666666666700, -4.913000608485471200, 18.24465176069331600 ) ) ; +#1196 = VERTEX_POINT ( 'NONE', #191 ) ; +#1197 = CARTESIAN_POINT ( 'NONE', ( 15.51892826072237600, 21.05859999975236400, -59.91717125457201100 ) ) ; +#1198 = CARTESIAN_POINT ( 'NONE', ( 11.86919999999999900, 7.102951435054621800E-017, 16.50000000000000000 ) ) ; +#1199 = CARTESIAN_POINT ( 'NONE', ( 6.164759564557445300, 6.882801464534873400, 18.74360562419774100 ) ) ; +#1201 = CARTESIAN_POINT ( 'NONE', ( 21.49081050271625100, 5.263558899163269800, 18.20335045468318900 ) ) ; +#1200 = PERSON_AND_ORGANIZATION ( #2275, #3296 ) ; +#1202 = CARTESIAN_POINT ( 'NONE', ( 19.56456170460670300, 1.185586819601943500, 20.29275226919886400 ) ) ; +#1203 = CIRCLE ( 'NONE', #2577, 5.000000000000000000 ) ; +#1204 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1205 = TOROIDAL_SURFACE ( 'NONE', #3244, 2.928932188134531600, 5.000000000000000000 ) ; +#1206 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1207 = CARTESIAN_POINT ( 'NONE', ( 19.95299950951296700, -9.999999999999996400, 17.44481467049735100 ) ) ; +#1208 = EDGE_CURVE ( 'NONE', #1277, #1964, #1714, .T. ) ; +#1209 = LINE ( 'NONE', #1153, #1476 ) ; +#1210 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025143600, -0.9659258262890700900 ) ) ; +#1211 = EDGE_CURVE ( 'NONE', #3481, #1747, #387, .T. ) ; +#1212 = CARTESIAN_POINT ( 'NONE', ( 17.40998370824612700, 21.11132182176493500, -58.62727584096748500 ) ) ; +#1213 = DIRECTION ( 'NONE', ( 1.290386776969941900E-016, 1.082475238955373700E-034, -1.000000000000000000 ) ) ; +#1214 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025143600 ) ) ; +#1215 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025144100, 0.9659258262890699800 ) ) ; +#1216 = CARTESIAN_POINT ( 'NONE', ( 15.97480809363797000, 23.98925314755048200, -63.05590937678292100 ) ) ; +#1217 = CARTESIAN_POINT ( 'NONE', ( 11.40526348943795500, 10.00000000000000400, 15.32111431373016700 ) ) ; +#1218 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.999423642752413200, 12.59359090277150600 ) ) ; +#1219 = CARTESIAN_POINT ( 'NONE', ( 22.44919999999999800, 19.65546469306329400, -53.19394306809147800 ) ) ; +#1220 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.773724697258101600, -46.51193553422098900 ) ) ; +#1221 = ORIENTED_EDGE ( 'NONE', *, *, #1181, .F. ) ; +#1222 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1223 = CARTESIAN_POINT ( 'NONE', ( 13.04889440249088000, 12.80486644046180800, -17.85295621771084000 ) ) ; +#1224 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890700900, 0.2588190451025145200 ) ) ; +#1225 = CARTESIAN_POINT ( 'NONE', ( 11.74165772924876300, 23.49372721568515800, -64.27026267510792900 ) ) ; +#1226 = ORIENTED_EDGE ( 'NONE', *, *, #1500, .T. ) ; +#1227 = AXIS2_PLACEMENT_3D ( 'NONE', #2520, #2508, #2502 ) ; +#1228 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1229 = ORIENTED_EDGE ( 'NONE', *, *, #1897, .F. ) ; +#1230 = ORIENTED_EDGE ( 'NONE', *, *, #2343, .F. ) ; +#1231 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1232 = ORIENTED_EDGE ( 'NONE', *, *, #2269, .F. ) ; +#1233 = EDGE_LOOP ( 'NONE', ( #2062, #2082, #2085, #2092, #2095, #2101, #2132, #2138, #2143, #2147, #2156, #2185 ) ) ; +#1234 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890698700, -0.2588190451025151900 ) ) ; +#1235 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9816779253385096200, -0.1905477654108795300 ) ) ; +#1236 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 110.0000000000000000, 5.665249758739244100 ) ) ; +#1237 = CARTESIAN_POINT ( 'NONE', ( 5.834821722338470600, 13.40741737109300400, -20.21665475151220500 ) ) ; +#1238 = ORIENTED_EDGE ( 'NONE', *, *, #2267, .F. ) ; +#1239 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 6.012797068815420900, 13.20402460292502600 ) ) ; +#1240 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9816779253385098400, 0.1905477654108793400 ) ) ; +#1241 = EDGE_LOOP ( 'NONE', ( #973, #1337, #1653, #1364 ) ) ; +#1242 = CARTESIAN_POINT ( 'NONE', ( 11.26893253771771200, -8.509715968122460300, 18.92868731555471500 ) ) ; +#1243 = ORIENTED_EDGE ( 'NONE', *, *, #93, .T. ) ; +#1244 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1245 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1905477654108794500, 0.9816779253385096200 ) ) ; +#1246 = ORIENTED_EDGE ( 'NONE', *, *, #888, .T. ) ; +#1247 = FACE_OUTER_BOUND ( 'NONE', #1447, .T. ) ; +#1248 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025151300, 0.9659258262890697600 ) ) ; +#1249 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 4.014749828072293500, 13.61697764103997200 ) ) ; +#1250 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1251 = VECTOR ( 'NONE', #2532, 1000.000000000000000 ) ; +#1252 = EDGE_CURVE ( 'NONE', #2292, #2088, #935, .T. ) ; +#1253 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1254 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 16.50000000000000000 ) ) ; +#1255 = FACE_OUTER_BOUND ( 'NONE', #518, .T. ) ; +#1256 = DIRECTION ( 'NONE', ( 1.000000000000000000, -3.457580948128860000E-017, 1.290386776969941900E-016 ) ) ; +#1257 = EDGE_CURVE ( 'NONE', #3148, #3224, #3573, .T. ) ; +#1258 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1905477654108795600, 0.9816779253385096200 ) ) ; +#1259 = CARTESIAN_POINT ( 'NONE', ( 0.6229275448461287800, -9.310869013799671000, 15.11522995982578100 ) ) ; +#1260 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025144100, 0.9659258262890699800 ) ) ; +#1261 = EDGE_CURVE ( 'NONE', #2628, #3231, #1026, .T. ) ; +#1262 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.037274284438658200E-016, 3.871160330909826300E-016 ) ) ; +#1263 = CARTESIAN_POINT ( 'NONE', ( 7.488416291753861900, 14.11082393428810100, -60.50305359653262400 ) ) ; +#1264 = ADVANCED_FACE ( 'NONE', ( #2265 ), #671, .T. ) ; +#1265 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890700900, 0.2588190451025145200 ) ) ; +#1266 = CARTESIAN_POINT ( 'NONE', ( 12.44919999999999800, 22.07027925878596300, -52.54689545533518900 ) ) ; +#1267 = CARTESIAN_POINT ( 'NONE', ( 10.70511563834865300, -8.482653894112555500, 18.83990488805925500 ) ) ; +#1268 = CARTESIAN_POINT ( 'NONE', ( 0.4870528748084004300, -9.459255247918184400, 14.83566534127012400 ) ) ; +#1269 = CARTESIAN_POINT ( 'NONE', ( 6.687042125834644000, 0.06987784869649814300, -26.55814265744463800 ) ) ; +#1270 = VERTEX_POINT ( 'NONE', #3804 ) ; +#1271 = APPROVAL_ROLE ( '' ) ; +#1272 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999994000, 12.65496680558646100, -55.06972082365662400 ) ) ; +#1273 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1274 = CARTESIAN_POINT ( 'NONE', ( 19.69659987805161400, -0.2946769692807658100, 20.25265964746240900 ) ) ; +#1275 = ORIENTED_EDGE ( 'NONE', *, *, #536, .T. ) ; +#1276 = CARTESIAN_POINT ( 'NONE', ( 22.34913074750228300, -7.140663048965953900, 17.43757889604129500 ) ) ; +#1277 = VERTEX_POINT ( 'NONE', #3338 ) ; +#1278 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999994000, 22.07027925878595900, -52.54689545533518200 ) ) ; +#1279 = ORIENTED_EDGE ( 'NONE', *, *, #391, .T. ) ; +#1280 = EDGE_LOOP ( 'NONE', ( #1738, #1742, #1752, #1779, #1786, #1789 ) ) ; +#1281 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, 12.93374564363917600, -28.10814606143646100 ) ) ; +#1282 = EDGE_CURVE ( 'NONE', #1796, #1558, #3754, .T. ) ; +#1283 = ORIENTED_EDGE ( 'NONE', *, *, #270, .F. ) ; +#1284 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1285 = ORIENTED_EDGE ( 'NONE', *, *, #1208, .T. ) ; +#1286 = CARTESIAN_POINT ( 'NONE', ( 0.2582147994166227300, -9.708710703643555800, 14.24434461064990200 ) ) ; +#1287 = AXIS2_PLACEMENT_3D ( 'NONE', #2161, #2145, #2126 ) ; +#1288 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -3.673940397442059200E-015, -2.499999999999999600 ) ) ; +#1289 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#1290 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.374999999999900500, -1.172277716886104300 ) ) ; +#1291 = ORIENTED_EDGE ( 'NONE', *, *, #109, .F. ) ; +#1292 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1085, #1075, #1046, #1027, #1022, #1020 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 3.878959614448864200E-018, 0.002046501110078467200, 0.004093002220156930100 ), + .UNSPECIFIED. ) ; +#1293 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.988372880617697900, 12.68459017141276100 ) ) ; +#1294 = CARTESIAN_POINT ( 'NONE', ( 6.933684554473174400, 2.039064654479041800, -25.75486939778890500 ) ) ; +#1295 = CARTESIAN_POINT ( 'NONE', ( 22.93256289875419900, -7.810763643568685100, 16.93735720792029700 ) ) ; +#1296 = CARTESIAN_POINT ( 'NONE', ( 5.177679710985827000, -6.465048791063596300, 18.52842017660129400 ) ) ; +#1297 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, 12.93374564363917600, -28.10814606143646100 ) ) ; +#1298 = VERTEX_POINT ( 'NONE', #2749 ) ; +#1299 = CYLINDRICAL_SURFACE ( 'NONE', #1650, 5.000000000000000000 ) ; +#1300 = CARTESIAN_POINT ( 'NONE', ( 0.1634118036677254500, -9.811803310475452700, 13.92610960264261000 ) ) ; +#1301 = CIRCLE ( 'NONE', #1893, 6.123724356957925600 ) ; +#1302 = DATE_TIME_ROLE ( 'classification_date' ) ; +#1303 = CIRCLE ( 'NONE', #3312, 100.0000000000000000 ) ; +#1304 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.01142209705481200, -59.79133915250320500 ) ) ; +#1305 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -9.184850993605144000E-016, 7.500000000000000000 ) ) ; +#1306 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -3.061616997868381200E-016, 2.500000000000002200 ) ) ; +#1307 = CARTESIAN_POINT ( 'NONE', ( 3.571317254570749900, -5.957257645293874600, 18.11089526564337900 ) ) ; +#1308 = LINE ( 'NONE', #1220, #2117 ) ; +#1309 = EDGE_CURVE ( 'NONE', #292, #3194, #2894, .T. ) ; +#1310 = CARTESIAN_POINT ( 'NONE', ( 0.03495846218925909700, -9.953839591099717100, 13.27376884986385300 ) ) ; +#1311 = CARTESIAN_POINT ( 'NONE', ( 22.44919999999999800, -88.81885793164890700, -72.39384004447242700 ) ) ; +#1312 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#1313 = EDGE_CURVE ( 'NONE', #3730, #2790, #2565, .T. ) ; +#1314 = CARTESIAN_POINT ( 'NONE', ( 4.801717531404327700, -0.4493730588907970400, -25.58619162937556600 ) ) ; +#1315 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.232595164407830900E-032, 2.138211768073756800E-048 ) ) ; +#1316 = DIRECTION ( 'NONE', ( -1.325001034533938600E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1317 = ORIENTED_EDGE ( 'NONE', *, *, #919, .T. ) ; +#1318 = CARTESIAN_POINT ( 'NONE', ( 20.80858014941267700, -0.3611391803263360700, 19.14069709398176400 ) ) ; +#1319 = ADVANCED_FACE ( 'NONE', ( #262 ), #2174, .F. ) ; +#1320 = ORIENTED_EDGE ( 'NONE', *, *, #968, .F. ) ; +#1321 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1322 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1323 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#1324 = ORIENTED_EDGE ( 'NONE', *, *, #795, .F. ) ; +#1325 = VERTEX_POINT ( 'NONE', #2965 ) ; +#1326 = EDGE_CURVE ( 'NONE', #1913, #3468, #571, .T. ) ; +#1327 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 16.50000000000000000 ) ) ; +#1328 = CARTESIAN_POINT ( 'NONE', ( 17.40998370824612700, 14.11082393428810100, -60.50305359653262400 ) ) ; +#1329 = CARTESIAN_POINT ( 'NONE', ( 5.046694876810426500, 6.421387181159032800, 18.49541510015830100 ) ) ; +#1330 = ORIENTED_EDGE ( 'NONE', *, *, #763, .F. ) ; +#1331 = ORIENTED_EDGE ( 'NONE', *, *, #943, .T. ) ; +#1332 = AXIS2_PLACEMENT_3D ( 'NONE', #96, #368, #2153 ) ; +#1333 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1334 = ORIENTED_EDGE ( 'NONE', *, *, #2984, .T. ) ; +#1335 = EDGE_CURVE ( 'NONE', #3224, #2058, #1441, .T. ) ; +#1336 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 13.40741737109300600, -20.21665475151221300 ) ) ; +#1337 = ORIENTED_EDGE ( 'NONE', *, *, #2398, .T. ) ; +#1338 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000100, 0.1527587727723613000, -25.16812189306750000 ) ) ; +#1339 = ORIENTED_EDGE ( 'NONE', *, *, #1473, .T. ) ; +#1340 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1341 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#1342 = VERTEX_POINT ( 'NONE', #3112 ) ; +#1343 = ADVANCED_FACE ( 'NONE', ( #3666 ), #2890, .F. ) ; +#1344 = CARTESIAN_POINT ( 'NONE', ( 2.565805899062105800, 1.647680761542555300, -29.77330469494306100 ) ) ; +#1345 = APPROVAL_DATE_TIME ( #1671, #1880 ) ; +#1346 = AXIS2_PLACEMENT_3D ( 'NONE', #1484, #853, #3504 ) ; +#1347 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -9.184850993605144000E-016, 7.500000000000000000 ) ) ; +#1349 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1348 = FACE_OUTER_BOUND ( 'NONE', #1543, .T. ) ; +#1350 = CARTESIAN_POINT ( 'NONE', ( 15.38830715675564100, 10.00000000000000200, 17.41769120120800800 ) ) ; +#1351 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#1352 = DIRECTION ( 'NONE', ( 1.734723475976806100E-015, -0.2588190451025143600, 0.9659258262890700900 ) ) ; +#1353 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1354 = EDGE_CURVE ( 'NONE', #2146, #292, #778, .T. ) ; +#1355 = EDGE_CURVE ( 'NONE', #1964, #1957, #2166, .T. ) ; +#1356 = ADVANCED_FACE ( 'NONE', ( #2067 ), #2815, .F. ) ; +#1357 = CARTESIAN_POINT ( 'NONE', ( 18.10659367524514000, 7.699590979554030500, 18.54883550887893400 ) ) ; +#1358 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#1359 = APPROVAL_ROLE ( '' ) ; +#1360 = EDGE_CURVE ( 'NONE', #3231, #902, #1114, .T. ) ; +#1361 = EDGE_CURVE ( 'NONE', #2998, #979, #488, .T. ) ; +#1362 = VERTEX_POINT ( 'NONE', #2528 ) ; +#1363 = VERTEX_POINT ( 'NONE', #2470 ) ; +#1364 = ORIENTED_EDGE ( 'NONE', *, *, #3110, .F. ) ; +#1365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890698700, 0.2588190451025151900 ) ) ; +#1366 = ORIENTED_EDGE ( 'NONE', *, *, #1631, .F. ) ; +#1367 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 10.03569824188444100, 12.59035268443285500 ) ) ; +#1368 = ORIENTED_EDGE ( 'NONE', *, *, #583, .T. ) ; +#1369 = CARTESIAN_POINT ( 'NONE', ( 16.16345975448763300, 6.387680343364287700, 20.12007448808694200 ) ) ; +#1370 = CARTESIAN_POINT ( 'NONE', ( 6.471219827101688100, 0.1950973261453784700, -26.80342402907487200 ) ) ; +#1371 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#1372 = AXIS2_PLACEMENT_3D ( 'NONE', #2039, #2035, #2029 ) ; +#1373 = ORIENTED_EDGE ( 'NONE', *, *, #2073, .T. ) ; +#1374 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 10.44872086830282100, 17.25550737944266500 ) ) ; +#1375 = ADVANCED_FACE ( 'NONE', ( #2696 ), #125, .F. ) ; +#1376 = CARTESIAN_POINT ( 'NONE', ( 5.399829244966117200, 3.388847589814001400, -28.00084746837016100 ) ) ; +#1377 = EDGE_CURVE ( 'NONE', #3194, #2547, #398, .T. ) ; +#1378 = VERTEX_POINT ( 'NONE', #3747 ) ; +#1379 = CARTESIAN_POINT ( 'NONE', ( 6.713588148358643300, 2.177750199734507700, -25.97557271302071800 ) ) ; +#1380 = ORIENTED_EDGE ( 'NONE', *, *, #1282, .F. ) ; +#1381 = CARTESIAN_POINT ( 'NONE', ( 4.673400172733255300, 10.47569949199192300, 17.56023512295523800 ) ) ; +#1382 = PLANE ( 'NONE', #3590 ) ; +#1383 = DIRECTION ( 'NONE', ( -1.795917894276933700E-016, 0.2588190451025151900, -0.9659258262890698700 ) ) ; +#1384 = DATE_TIME_ROLE ( 'creation_date' ) ; +#1385 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1386 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.021910162365179200, 12.68010692637851200 ) ) ; +#1387 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.999423642752454100, 12.59359090277176900 ) ) ; +#1388 = VECTOR ( 'NONE', #2481, 1000.000000000000100 ) ; +#1389 = TOROIDAL_SURFACE ( 'NONE', #2400, 14.14213562373095300, 10.00000000000000000 ) ; +#1390 = CARTESIAN_POINT ( 'NONE', ( 22.44919999999999800, 12.65496680558646100, -55.06972082365662400 ) ) ; +#1391 = CYLINDRICAL_SURFACE ( 'NONE', #2368, 5.000000000000000000 ) ; +#1392 = CARTESIAN_POINT ( 'NONE', ( 1.301827314676769000E-012, 9.624571084048001900, 17.15856364345096100 ) ) ; +#1393 = CARTESIAN_POINT ( 'NONE', ( 21.82735887932076900, 5.814505664802982900, 17.98964982364998000 ) ) ; +#1394 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#1395 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -10.03569824188444000, 12.59035268443285500 ) ) ; +#1396 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1884, #2172, #2183, #1869, #1853, #1682, #1616, #1582, #1577, #1563 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 1.734723475976807100E-018, 0.002477179999773855600, 0.004954359999547709600, 0.007431539999321563900, 0.009908719999095417400 ), + .UNSPECIFIED. ) ; +#1397 = CARTESIAN_POINT ( 'NONE', ( 4.490311051338251100, 9.663611965802863000, 17.62010025155298700 ) ) ; +#1398 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1829, #2472, #666 ), + ( #2779, #949, #3077 ), + ( #1239, #3364, #1532 ), + ( #3661, #1846, #107 ), + ( #2168, #2483, #3676 ), + ( #1541, #678, #383 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.003051067943565615600, 0.006102135887131231200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8164965809277260300, 1.000000000000000000), + ( 1.000000000000000000, 0.8021346805479672200, 1.000000000000000000), + ( 1.000000000000000000, 0.7862227654680678000, 1.000000000000000000), + ( 1.000000000000000000, 0.7563599117503221300, 1.000000000000000000), + ( 1.000000000000000000, 0.7423321108457323600, 1.000000000000000000), + ( 1.000000000000000000, 0.7298355860922886000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1399 = CARTESIAN_POINT ( 'NONE', ( 21.32942369399698300, 5.960521729848161400, 18.11286642393776700 ) ) ; +#1400 = ORIENTED_EDGE ( 'NONE', *, *, #2099, .T. ) ; +#1401 = CARTESIAN_POINT ( 'NONE', ( 20.50006385452508100, 10.00000000000000400, 13.23447473476262600 ) ) ; +#1402 = CARTESIAN_POINT ( 'NONE', ( 4.263119122978855200, -0.1248046114399156800, -26.20415816139524200 ) ) ; +#1403 = APPROVAL_ROLE ( '' ) ; +#1404 = ORIENTED_EDGE ( 'NONE', *, *, #2511, .T. ) ; +#1405 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -10.44872086830282100, 17.25550737944266500 ) ) ; +#1406 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, 8.016164268297954400, 12.83319078563510400 ) ) ; +#1407 = ORIENTED_EDGE ( 'NONE', *, *, #1597, .T. ) ; +#1408 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1409 = VERTEX_POINT ( 'NONE', #3739 ) ; +#1410 = ORIENTED_EDGE ( 'NONE', *, *, #2054, .T. ) ; +#1411 = CARTESIAN_POINT ( 'NONE', ( -4.513794777025818200E-013, 8.740062426158138100, 17.09984940044473900 ) ) ; +#1412 = ORIENTED_EDGE ( 'NONE', *, *, #2217, .T. ) ; +#1413 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.838808320239663900E-032, 1.060000827627150900E-016 ) ) ; +#1414 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#1415 = CARTESIAN_POINT ( 'NONE', ( 20.22499982726674600, -10.47569949199192200, 17.56023512295523800 ) ) ; +#1416 = VERTEX_POINT ( 'NONE', #3707 ) ; +#1417 = CARTESIAN_POINT ( 'NONE', ( 4.281426314393078400, 8.820401246231808700, 17.72212718908508600 ) ) ; +#1418 = ORIENTED_EDGE ( 'NONE', *, *, #1955, .F. ) ; +#1419 = CARTESIAN_POINT ( 'NONE', ( 15.38830715676367500, -9.999999999999415600, 17.41769120120931900 ) ) ; +#1420 = EDGE_CURVE ( 'NONE', #2736, #3567, #3285, .T. ) ; +#1421 = ORIENTED_EDGE ( 'NONE', *, *, #1654, .F. ) ; +#1422 = FACE_OUTER_BOUND ( 'NONE', #3154, .T. ) ; +#1423 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#1424 = CARTESIAN_POINT ( 'NONE', ( 9.510092843242945900, -9.999999999999417400, 17.41769120121034200 ) ) ; +#1426 = CARTESIAN_POINT ( 'NONE', ( 17.05928160821659400, 21.19137201089375500, -58.92602721395174100 ) ) ; +#1425 = VECTOR ( 'NONE', #3443, 1000.000000000000000 ) ; +#1427 = EDGE_CURVE ( 'NONE', #3093, #1416, #1867, .T. ) ; +#1428 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #1437 ) ; +#1429 = CARTESIAN_POINT ( 'NONE', ( 4.949199999999997600, -88.81885793164890700, -72.39384004447242700 ) ) ; +#1430 = LINE ( 'NONE', #3413, #8 ) ; +#1431 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, 6.012797068815421800, 13.20402460292414300 ) ) ; +#1432 = CARTESIAN_POINT ( 'NONE', ( 24.64018678594235800, -9.708712428969709800, 14.24433959223951400 ) ) ; +#1433 = CARTESIAN_POINT ( 'NONE', ( 19.69642512675107300, 0.2975976839680321000, 20.25271505346809400 ) ) ; +#1434 = CARTESIAN_POINT ( 'NONE', ( 4.325330932468912200E-013, 6.827919535239905400, 17.05260112796550600 ) ) ; +#1435 = ADVANCED_FACE ( 'NONE', ( #1156 ), #3623, .T. ) ; +#1436 = CARTESIAN_POINT ( 'NONE', ( 6.081323436940504500, 0.4532539624592651900, -27.31466127774784500 ) ) ; +#1437 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#1438 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -9.021910162364827500, 12.68010692637830800 ) ) ; +#1439 = EDGE_CURVE ( 'NONE', #1012, #119, #1758, .T. ) ; +#1440 = CARTESIAN_POINT ( 'NONE', ( 16.69285189030044900, 21.19501796497477700, -59.20033126072267000 ) ) ; +#1441 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2723, #3221, #2990, #3118, #3115, #2882 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.003035771775103655300, 0.006071543550207310700 ), + .UNSPECIFIED. ) ; +#1442 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1626, #1530, #1486 ), + ( #1482, #1474, #1467 ), + ( #1454, #1434, #1431 ), + ( #1417, #1411, #1406 ), + ( #1397, #1392, #1386 ), + ( #1381, #1374, #1367 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( -8.673617379884035500E-019, 0.003051067943565614700, 0.006102135887131230300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8164965809277260300, 1.000000000000000000), + ( 1.000000000000000000, 0.8021346805478827300, 1.000000000000000000), + ( 1.000000000000000000, 0.7862227654681809300, 1.000000000000000000), + ( 1.000000000000000000, 0.7563599117502090000, 1.000000000000000000), + ( 1.000000000000000000, 0.7423321108458164100, 1.000000000000000000), + ( 1.000000000000000000, 0.7298355860922887100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1443 = ORIENTED_EDGE ( 'NONE', *, *, #1808, .F. ) ; +#1444 = EDGE_CURVE ( 'NONE', #2058, #2346, #2610, .T. ) ; +#1445 = CARTESIAN_POINT ( 'NONE', ( 18.73571214018402700, 6.881629992121514900, 18.74326536836026900 ) ) ; +#1446 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1447 = EDGE_LOOP ( 'NONE', ( #2796, #2817, #2824, #2828, #2833, #2861 ) ) ; +#1448 = ORIENTED_EDGE ( 'NONE', *, *, #686, .T. ) ; +#1449 = CARTESIAN_POINT ( 'NONE', ( 19.20804999347410200, -2.309513708153674300, 20.38186263022749100 ) ) ; +#1450 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#1451 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -9.624571084047799400, 17.15856364345083300 ) ) ; +#1452 = ORIENTED_EDGE ( 'NONE', *, *, #470, .T. ) ; +#1453 = EDGE_LOOP ( 'NONE', ( #925, #954, #3520, #3607, #1093 ) ) ; +#1454 = CARTESIAN_POINT ( 'NONE', ( 3.820767105335646500, 6.995614750438638100, 17.96934973662108000 ) ) ; +#1455 = ADVANCED_FACE ( 'NONE', ( #2611 ), #1664, .T. ) ; +#1456 = VERTEX_POINT ( 'NONE', #3411 ) ; +#1457 = DIRECTION ( 'NONE', ( 0.7071067811865479100, -0.7071067811865472400, -2.453269466693397100E-016 ) ) ; +#1458 = CARTESIAN_POINT ( 'NONE', ( 8.090640351396480400, 10.00000000000000000, 14.51368510905947100 ) ) ; +#1459 = ORIENTED_EDGE ( 'NONE', *, *, #1579, .F. ) ; +#1460 = CARTESIAN_POINT ( 'NONE', ( 1.606218528810285000, 5.433907193222843500, 17.68057799747028400 ) ) ; +#1461 = CARTESIAN_POINT ( 'NONE', ( 20.80843129671459800, 0.3647196016798345800, 19.14069107783062400 ) ) ; +#1462 = EDGE_LOOP ( 'NONE', ( #739, #783, #786, #819 ) ) ; +#1463 = MECHANICAL_CONTEXT ( 'NONE', #1480, 'mechanical' ) ; +#1464 = CARTESIAN_POINT ( 'NONE', ( 25.15290567487880900, 10.00000000000000400, 17.42727761131465800 ) ) ; +#1465 = EDGE_CURVE ( 'NONE', #652, #3279, #1876, .T. ) ; +#1466 = CARTESIAN_POINT ( 'NONE', ( 20.40808894866251300, -9.663611965802275000, 17.62010025155299100 ) ) ; +#1467 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, 5.015388530223144200, 13.42274950506094400 ) ) ; +#1468 = CARTESIAN_POINT ( 'NONE', ( 6.551914445281598300, -7.076541755999628000, 18.78464941532618900 ) ) ; +#1469 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #847, #835, #828, #820 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 7.599531627310730600E-005 ), + .UNSPECIFIED. ) ; +#1470 = DATE_AND_TIME ( #3020, #2211 ) ; +#1471 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1472 = CARTESIAN_POINT ( 'NONE', ( 15.26306635468538700, 7.387764451437856600, 19.60152928809260300 ) ) ; +#1473 = EDGE_CURVE ( 'NONE', #1647, #2392, #1167, .T. ) ; +#1474 = CARTESIAN_POINT ( 'NONE', ( -2.702571021682672600E-012, 5.806664120496191300, 17.06281136991253800 ) ) ; +#1475 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1476 = VECTOR ( 'NONE', #1118, 999.9999999999998900 ) ; +#1477 = CARTESIAN_POINT ( 'NONE', ( 5.546460510922263300, 10.00000000000056800, 17.50587012975645600 ) ) ; +#1478 = LINE ( 'NONE', #2372, #2326 ) ; +#1479 = CARTESIAN_POINT ( 'NONE', ( 4.019502161369144000, 0.04227784886687480800, -26.52620413590010200 ) ) ; +#1480 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#1481 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -8.016164268298394900, 12.83319078563510600 ) ) ; +#1482 = CARTESIAN_POINT ( 'NONE', ( 3.566351207635543900, 6.013062097049536100, 18.11504713615396900 ) ) ; +#1483 = CARTESIAN_POINT ( 'NONE', ( 23.63958512944824300, -9.999999999999998200, 12.57081540354582900 ) ) ; +#1484 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -88.81885793164890700, -72.39384004447242700 ) ) ; +#1485 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000600, -8.740062426158511100, 17.09984940044293800 ) ) ; +#1486 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, 4.014749828072295300, 13.61697764103997300 ) ) ; +#1487 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000100, 10.00000000000000200, 14.27124344467704900 ) ) ; +#1488 = CARTESIAN_POINT ( 'NONE', ( 6.555342592694676000, 7.078209278572905400, 18.78499489699473900 ) ) ; +#1489 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #1480 ) ; +#1490 = ORIENTED_EDGE ( 'NONE', *, *, #1439, .F. ) ; +#1491 = CARTESIAN_POINT ( 'NONE', ( 20.61697368560764000, -8.820401246232952600, 17.72212718908473100 ) ) ; +#1492 = EDGE_CURVE ( 'NONE', #2009, #3730, #503, .T. ) ; +#1493 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1494 = CARTESIAN_POINT ( 'NONE', ( 19.72072028901416000, -6.465048791064383200, 18.52842017660100300 ) ) ; +#1495 = AXIS2_PLACEMENT_3D ( 'NONE', #670, #637, #569 ) ; +#1496 = EDGE_LOOP ( 'NONE', ( #2630, #3223, #159, #2538, #3137 ) ) ; +#1497 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -6.012797068814980300, 13.20402460292414100 ) ) ; +#1498 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1499 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.999423642752454100, 12.59359090277176900 ) ) ; +#1500 = EDGE_CURVE ( 'NONE', #3467, #3658, #2407, .T. ) ; +#1501 = ORIENTED_EDGE ( 'NONE', *, *, #688, .T. ) ; +#1502 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#1503 = CARTESIAN_POINT ( 'NONE', ( 5.834821722338498200, 24.01142209705481200, -59.79133915250319800 ) ) ; +#1504 = CARTESIAN_POINT ( 'NONE', ( 15.09695623874427300, 23.80308625675116800, -63.60523649003494000 ) ) ; +#1505 = ORIENTED_EDGE ( 'NONE', *, *, #854, .F. ) ; +#1506 = EDGE_LOOP ( 'NONE', ( #3462, #3289, #215, #3217 ) ) ; +#1507 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.999807868217018800, 12.56826204476220000 ) ) ; +#1508 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#1509 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -6.827919535239403500, 17.05260112796723600 ) ) ; +#1510 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 110.0000000000000000, 5.665249758739244100 ) ) ; +#1511 = ORIENTED_EDGE ( 'NONE', *, *, #209, .F. ) ; +#1512 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#1513 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2406, #3604, #2703 ), + ( #590, #2389, #301 ), + ( #1750, #192, #1958 ), + ( #2272, #2283, #204 ), + ( #1974, #3760, #1637 ), + ( #3480, #1350, #3175 ), + ( #1051, #2887, #766 ), + ( #2584, #480, #777 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 3.794707603699265500E-018, 0.001023250555039342200, 0.002046501110078680600, 0.004093002220157357700 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8164965809277257000, 1.000000000000000000), + ( 1.000000000000000000, 0.8335262052137592000, 1.000000000000000000), + ( 1.000000000000000000, 0.8461836458337723700, 1.000000000000000000), + ( 1.000000000000000000, 0.8674092759744673800, 1.000000000000000000), + ( 1.000000000000000000, 0.8759986957842900200, 1.000000000000000000), + ( 1.000000000000000000, 0.8987980930245987900, 1.000000000000000000), + ( 1.000000000000000000, 0.9099784173014525700, 1.000000000000000000), + ( 1.000000000000000000, 0.9198317473328699900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1514 = EDGE_LOOP ( 'NONE', ( #1956, #2004, #2050, #2087, #2246 ) ) ; +#1515 = CARTESIAN_POINT ( 'NONE', ( 21.07763289466363000, -6.995614750437493300, 17.96934973662143200 ) ) ; +#1516 = ORIENTED_EDGE ( 'NONE', *, *, #1113, .T. ) ; +#1517 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 17.50000000000000000 ) ) ; +#1518 = CARTESIAN_POINT ( 'NONE', ( 11.84382301204912700, 12.80805322534702600, -17.86613753412853000 ) ) ; +#1519 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025143600, 0.9659258262890700900 ) ) ; +#1520 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #761, #675, #661 ), + ( #643, #639, #632 ), + ( #628, #619, #614 ), + ( #599, #588, #575 ), + ( #560, #548, #540 ), + ( #528, #517, #505 ), + ( #495, #483, #455 ), + ( #444, #428, #394 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 0.03756001926301486000, 0.03978849970605913300, 0.04201698014910340600, 0.04647394103519194400 ), + ( 0.5997905187096253000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 0.9634558039606149200, 0.9695358671907607900, 1.000000000000000000), + ( 0.9668597682132187300, 0.9723734947844137100, 1.000000000000000000), + ( 0.9703618919239138700, 0.9752929504955756300, 1.000000000000000000), + ( 0.9770262534397118300, 0.9808485247401765900, 1.000000000000000000), + ( 0.9801940573404448500, 0.9834892833066408700, 1.000000000000000000), + ( 0.9888379578832000600, 0.9906950495476206700, 1.000000000000000000), + ( 0.9934360502067007800, 0.9945281314154309500, 1.000000000000000000), + ( 0.9963097891317029800, 0.9969237502484734600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1521 = ORIENTED_EDGE ( 'NONE', *, *, #798, .T. ) ; +#1523 = CARTESIAN_POINT ( 'NONE', ( 10.72715050455277100, 23.62323566318449200, -64.01726233739250900 ) ) ; +#1522 = FACE_OUTER_BOUND ( 'NONE', #3812, .T. ) ; +#1524 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1804, #1834, #1840, #1794 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 0.7297276562269670000 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9561149059751437000, 0.9561149059751437000, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#1525 = LINE ( 'NONE', #927, #3165 ) ; +#1526 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#1527 = EDGE_CURVE ( 'NONE', #3734, #1004, #981, .T. ) ; +#1528 = FACE_OUTER_BOUND ( 'NONE', #2645, .T. ) ; +#1529 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -5.015388530223514600, 13.42274950506113000 ) ) ; +#1530 = CARTESIAN_POINT ( 'NONE', ( -1.301042606982605100E-015, 4.688437913382176500, 17.08773323077997800 ) ) ; +#1531 = CARTESIAN_POINT ( 'NONE', ( 13.02920000000000100, -1.925929944387235900E-031, 22.50000000000000400 ) ) ; +#1532 = CARTESIAN_POINT ( 'NONE', ( 21.07763289466360500, 6.995614750438346800, 17.96934973662127900 ) ) ; +#1533 = CARTESIAN_POINT ( 'NONE', ( 6.651966109247742200, 24.22314362633310800, -60.90088058810028600 ) ) ; +#1534 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -3.673940397442059200E-015, -2.499999999999999600 ) ) ; +#1535 = CARTESIAN_POINT ( 'NONE', ( 1.807003620809177000E-017, -9.994186853177241800, 12.93880982189508400 ) ) ; +#1536 = CARTESIAN_POINT ( 'NONE', ( -1.165002923839966400E-016, -9.999999999999998200, 12.54292954420088800 ) ) ; +#1537 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025144100, 0.9659258262890699800 ) ) ; +#1538 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -5.806664120496190400, 17.06281136989811400 ) ) ; +#1539 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1540 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000001200, 1.598510117153265000, -25.35804347956666800 ) ) ; +#1541 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 10.03569824188444100, 12.59035268443285600 ) ) ; +#1542 = CARTESIAN_POINT ( 'NONE', ( 24.27547607843737500, 9.310872980100663600, 15.11522281459598500 ) ) ; +#1543 = EDGE_LOOP ( 'NONE', ( #2642, #2668, #2673, #2682, #2692, #2722, #2727, #2732 ) ) ; +#1544 = EDGE_CURVE ( 'NONE', #906, #2192, #3488, .T. ) ; +#1545 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000100, 4.999999999999992000, -24.44661701239527600 ) ) ; +#1546 = ORIENTED_EDGE ( 'NONE', *, *, #1700, .F. ) ; +#1547 = VERTEX_POINT ( 'NONE', #2818 ) ; +#1548 = EDGE_CURVE ( 'NONE', #3730, #1647, #220, .T. ) ; +#1549 = EDGE_CURVE ( 'NONE', #3369, #1363, #3686, .T. ) ; +#1550 = CARTESIAN_POINT ( 'NONE', ( 22.13462955584640900, 1.764437413706013700, 18.40678790443672200 ) ) ; +#1551 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1552 = VERTEX_POINT ( 'NONE', #2755 ) ; +#1553 = ORIENTED_EDGE ( 'NONE', *, *, #2511, .F. ) ; +#1554 = CARTESIAN_POINT ( 'NONE', ( 21.33204879236583900, -6.013062097050529100, 18.11504713615327900 ) ) ; +#1555 = DIRECTION ( 'NONE', ( 1.335906693713116800E-016, 0.2588190451025144100, -0.9659258262890700900 ) ) ; +#1556 = EDGE_CURVE ( 'NONE', #1892, #1092, #3005, .T. ) ; +#1557 = CARTESIAN_POINT ( 'NONE', ( 3.333333333333335300, 4.913000608485470300, 18.24465176069331600 ) ) ; +#1558 = VERTEX_POINT ( 'NONE', #2616 ) ; +#1559 = VERTEX_POINT ( 'NONE', #2568 ) ; +#1560 = CARTESIAN_POINT ( 'NONE', ( 5.908566470952877100, 0.5853410053578614900, -27.57894841353249800 ) ) ; +#1561 = ORIENTED_EDGE ( 'NONE', *, *, #709, .T. ) ; +#1562 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, 4.999999999999986700, -22.46941544652785800 ) ) ; +#1563 = CARTESIAN_POINT ( 'NONE', ( 21.56506666666667000, 4.913000608485470300, 18.24465176069333000 ) ) ; +#1564 = EDGE_LOOP ( 'NONE', ( #1060, #1418, #1082, #1443, #1131 ) ) ; +#1565 = CARTESIAN_POINT ( 'NONE', ( 6.126926621003047300, 2.613033397759762600, -26.68284672137585300 ) ) ; +#1566 = CARTESIAN_POINT ( 'NONE', ( 7.488416291753847700, 13.89270308066020500, -22.02776567580419700 ) ) ; +#1567 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2068, #2061, #2056, #2048, #2044, #2037 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 8.852752807569025300E-015, 0.001767984876993209000, 0.003535969753977565200 ), + .UNSPECIFIED. ) ; +#1568 = CARTESIAN_POINT ( 'NONE', ( 10.58319996410909300, 4.999999999999987600, -22.46941544652785800 ) ) ; +#1569 = CARTESIAN_POINT ( 'NONE', ( 19.94920000000000100, 19.65546469306329400, -53.19394306809147800 ) ) ; +#1570 = DIRECTION ( 'NONE', ( -1.041844379026571800E-016, 0.9816779253385096200, 0.1905477654108794800 ) ) ; +#1571 = VECTOR ( 'NONE', #3157, 1000.000000000000000 ) ; +#1572 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2188, #1293, #2158, #2149, #2144, #2131 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 5.768538670067311400E-007, 0.003036348628970665000, 0.006072120404074323800 ), + .UNSPECIFIED. ) ; +#1573 = CARTESIAN_POINT ( 'NONE', ( 6.199200000000003800, -9.999999999999996400, 17.57843258350778700 ) ) ; +#1574 = VECTOR ( 'NONE', #3051, 999.9999999999998900 ) ; +#1575 = EDGE_CURVE ( 'NONE', #1456, #902, #2308, .T. ) ; +#1576 = LINE ( 'NONE', #2733, #48 ) ; +#1577 = CARTESIAN_POINT ( 'NONE', ( 21.77449861018998300, 4.109468760028302200, 18.32519327271877400 ) ) ; +#1578 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1579 = EDGE_CURVE ( 'NONE', #2009, #1100, #3116, .T. ) ; +#1580 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -4.014749828072297100, 13.61697764103997300 ) ) ; +#1581 = CARTESIAN_POINT ( 'NONE', ( 3.581835379511842300, 0.3848053017884284800, -27.19596463223523100 ) ) ; +#1582 = CARTESIAN_POINT ( 'NONE', ( 21.92804952607207600, 3.297271544787451000, 18.36912321685300100 ) ) ; +#1583 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1584 = CARTESIAN_POINT ( 'NONE', ( 5.604389828621606300, 0.8542212375277381500, -28.12305054878711300 ) ) ; +#1585 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000100, -1.505759517047178300, -23.64527242200713200 ) ) ; +#1586 = ORIENTED_EDGE ( 'NONE', *, *, #908, .F. ) ; +#1587 = CARTESIAN_POINT ( 'NONE', ( 3.568976306003019100, 5.960521729848161400, 18.11286642393776700 ) ) ; +#1588 = CARTESIAN_POINT ( 'NONE', ( 8.840034308756370900, 4.999999999999987600, -23.15873341919380100 ) ) ; +#1589 = ORIENTED_EDGE ( 'NONE', *, *, #532, .F. ) ; +#1590 = VERTEX_POINT ( 'NONE', #2552 ) ; +#1591 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #1526, 'distance_accuracy_value', 'NONE'); +#1592 = CARTESIAN_POINT ( 'NONE', ( 0.6777782580987437000, -10.00000000000334800, 17.31375120603116700 ) ) ; +#1593 = ORIENTED_EDGE ( 'NONE', *, *, #2993, .F. ) ; +#1594 = VERTEX_POINT ( 'NONE', #2766 ) ; +#1595 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.999999999999998200, 12.51759777210975600 ) ) ; +#1596 = DIRECTION ( 'NONE', ( 1.232595164407830900E-032, -1.000000000000000000, 1.588080900582084500E-016 ) ) ; +#1597 = EDGE_CURVE ( 'NONE', #2, #3510, #1567, .T. ) ; +#1598 = ORIENTED_EDGE ( 'NONE', *, *, #1544, .F. ) ; +#1599 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025143600, 0.9659258262890698700 ) ) ; +#1600 = ORIENTED_EDGE ( 'NONE', *, *, #2193, .T. ) ; +#1601 = DIRECTION ( 'NONE', ( 0.6484729204542126800, 0.0000000000000000000, 0.7612377233411284900 ) ) ; +#1602 = AXIS2_PLACEMENT_3D ( 'NONE', #1236, #1228, #1222 ) ; +#1603 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1604 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 12.18129507813263700, -62.96121213358090100 ) ) ; +#1605 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1606 = ORIENTED_EDGE ( 'NONE', *, *, #2542, .T. ) ; +#1607 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1608 = ADVANCED_FACE ( 'NONE', ( #877 ), #885, .T. ) ; +#1609 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1610 = CARTESIAN_POINT ( 'NONE', ( 2.449200000000006000, 2.371521134422848800, -31.35343597986623700 ) ) ; +#1611 = ORIENTED_EDGE ( 'NONE', *, *, #1933, .F. ) ; +#1612 = ORIENTED_EDGE ( 'NONE', *, *, #224, .F. ) ; +#1613 = CARTESIAN_POINT ( 'NONE', ( 5.798676534657693600, 2.915337851724294700, -27.18727870862431200 ) ) ; +#1614 = ORIENTED_EDGE ( 'NONE', *, *, #1036, .F. ) ; +#1615 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1616 = CARTESIAN_POINT ( 'NONE', ( 22.13523397795211500, 1.658644120440420800, 18.42361056702968700 ) ) ; +#1617 = CARTESIAN_POINT ( 'NONE', ( 5.984733905932709600, -1.925929944387235900E-031, 21.03553390593272000 ) ) ; +#1618 = CIRCLE ( 'NONE', #3176, 100.0000000000000100 ) ; +#1619 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 22.50000000000000400 ) ) ; +#1620 = DIRECTION ( 'NONE', ( 3.859759734048395800E-016, 2.040034807748725100E-014, 1.000000000000000000 ) ) ; +#1621 = FACE_OUTER_BOUND ( 'NONE', #1688, .T. ) ; +#1622 = CARTESIAN_POINT ( 'NONE', ( 5.228460460822714300, 0.5884215594225171700, 20.26134732804776900 ) ) ; +#1623 = EDGE_CURVE ( 'NONE', #1100, #3551, #39, .T. ) ; +#1624 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #587 ) ) ; +#1625 = ADVANCED_FACE ( 'NONE', ( #3200 ), #2133, .T. ) ; +#1626 = CARTESIAN_POINT ( 'NONE', ( 3.333333333333333500, 4.913000608485471200, 18.24465176069331900 ) ) ; +#1627 = CARTESIAN_POINT ( 'NONE', ( 15.27576791682667700, 8.285840806397962100, 18.79289067086780600 ) ) ; +#1628 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.18129507813263500, -62.96121213358091500 ) ) ; +#1629 = CARTESIAN_POINT ( 'NONE', ( 11.86919999999999900, 7.102951435054621800E-017, 22.50000000000000400 ) ) ; +#1630 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -10.00000000000000400, -7.499999999999995600 ) ) ; +#1631 = EDGE_CURVE ( 'NONE', #3468, #3193, #2514, .T. ) ; +#1632 = CARTESIAN_POINT ( 'NONE', ( 3.051079086776255600, 0.9178595809590502900, -28.26354014240654400 ) ) ; +#1633 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999997600, -10.00000000000000500, -7.499999999999995600 ) ) ; +#1634 = CARTESIAN_POINT ( 'NONE', ( 7.988991526341880700, -7.673159582448743500, 18.87032528560184000 ) ) ; +#1635 = ORIENTED_EDGE ( 'NONE', *, *, #2267, .T. ) ; +#1636 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025143600 ) ) ; +#1637 = CARTESIAN_POINT ( 'NONE', ( 16.90940847365868600, 7.673159582448347400, 18.87032528560197900 ) ) ; +#1638 = CARTESIAN_POINT ( 'NONE', ( 3.387789517425511500, 0.5602536773445950800, -27.54367982132690800 ) ) ; +#1639 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.074441630149904000, -13.39944000404294900 ) ) ; +#1640 = ORIENTED_EDGE ( 'NONE', *, *, #655, .T. ) ; +#1641 = VERTEX_POINT ( 'NONE', #454 ) ; +#1642 = CC_DESIGN_SECURITY_CLASSIFICATION ( #1729, ( #1831 ) ) ; +#1643 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -9.184850993605144000E-016, 12.49999999999999600 ) ) ; +#1644 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000000300, 4.999999999999992000, -24.44661701239527600 ) ) ; +#1645 = ADVANCED_FACE ( 'NONE', ( #136 ), #229, .T. ) ; +#1646 = CARTESIAN_POINT ( 'NONE', ( 2.970409555245214800, 3.297484521092737300, 18.36910484970999800 ) ) ; +#1647 = VERTEX_POINT ( 'NONE', #412 ) ; +#1648 = ORIENTED_EDGE ( 'NONE', *, *, #365, .F. ) ; +#1649 = EDGE_CURVE ( 'NONE', #2547, #1196, #3409, .T. ) ; +#1650 = AXIS2_PLACEMENT_3D ( 'NONE', #1651, #1609, #1603 ) ; +#1651 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#1652 = ORIENTED_EDGE ( 'NONE', *, *, #763, .T. ) ; +#1653 = ORIENTED_EDGE ( 'NONE', *, *, #2349, .F. ) ; +#1654 = EDGE_CURVE ( 'NONE', #1662, #292, #2929, .T. ) ; +#1655 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1656 = ORIENTED_EDGE ( 'NONE', *, *, #916, .F. ) ; +#1657 = CARTESIAN_POINT ( 'NONE', ( 16.41788943822502800, 6.100011023493570900, 20.23211946412584100 ) ) ; +#1658 = VERTEX_POINT ( 'NONE', #1633 ) ; +#1659 = CARTESIAN_POINT ( 'NONE', ( 22.44919999999999400, 2.371521134422852400, -31.35343597986623700 ) ) ; +#1660 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1661 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999998500, -8.074441630149920000, -13.39944000404295300 ) ) ; +#1662 = VERTEX_POINT ( 'NONE', #1617 ) ; +#1663 = CC_DESIGN_APPROVAL ( #650, ( #1729 ) ) ; +#1664 = CYLINDRICAL_SURFACE ( 'NONE', #3001, 2.500000000000000000 ) ; +#1665 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -88.81885793164890700, -72.39384004447242700 ) ) ; +#1666 = ADVANCED_FACE ( 'NONE', ( #525 ), #1299, .F. ) ; +#1667 = CIRCLE ( 'NONE', #1770, 102.5000000000000100 ) ; +#1668 = CARTESIAN_POINT ( 'NONE', ( 15.37754632281692600, 7.266828808001354100, 19.69984150254249400 ) ) ; +#1669 = CARTESIAN_POINT ( 'NONE', ( 10.68267058978555200, -8.460904434022083400, 18.85664821965416800 ) ) ; +#1670 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.014749828072294400, 13.61697764103997500 ) ) ; +#1671 = DATE_AND_TIME ( #839, #2701 ) ; +#1672 = DIRECTION ( 'NONE', ( -0.6484729204542122300, 0.0000000000000000000, 0.7612377233411287100 ) ) ; +#1673 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1674 = EDGE_CURVE ( 'NONE', #2503, #3468, #2106, .T. ) ; +#1675 = CARTESIAN_POINT ( 'NONE', ( 10.41670461645452400, -8.202839060355421100, 19.05490808386737100 ) ) ; +#1676 = EDGE_CURVE ( 'NONE', #1456, #3783, #618, .T. ) ; +#1677 = AXIS2_PLACEMENT_3D ( 'NONE', #1347, #1340, #1333 ) ; +#1678 = CARTESIAN_POINT ( 'NONE', ( 5.834821722338470600, 13.40741737109300400, -20.21665475151220500 ) ) ; +#1679 = CARTESIAN_POINT ( 'NONE', ( 10.15498186616944000, -7.936596969542483400, 19.24518683206896300 ) ) ; +#1680 = AXIS2_PLACEMENT_3D ( 'NONE', #696, #1321, #723 ) ; +#1681 = CARTESIAN_POINT ( 'NONE', ( 13.49313651056205600, -9.999999999999998200, 15.32111431373024000 ) ) ; +#1682 = CARTESIAN_POINT ( 'NONE', ( 22.18819489615152200, 0.8310536827525038000, 18.43396647196210500 ) ) ; +#1683 = ORIENTED_EDGE ( 'NONE', *, *, #2162, .T. ) ; +#1684 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #717, #622, #605, #598, #594, #586, #2221, #2208, #2203, #581 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.002686391017250099100, 0.003948031222628219100, 0.005209671428006339500, 0.006471311633384459000, 0.007732951838762578600 ), + .UNSPECIFIED. ) ; +#1685 = VERTEX_POINT ( 'NONE', #1545 ) ; +#1686 = VERTEX_POINT ( 'NONE', #1534 ) ; +#1687 = CARTESIAN_POINT ( 'NONE', ( 9.635333645314451800, -7.387764451437686100, 19.60152928809270600 ) ) ; +#1688 = EDGE_LOOP ( 'NONE', ( #1279, #1283, #1330, #1366 ) ) ; +#1689 = CARTESIAN_POINT ( 'NONE', ( 14.16260539609900000, -9.999999999999998200, 15.18428817202209300 ) ) ; +#1690 = ORIENTED_EDGE ( 'NONE', *, *, #1465, .T. ) ; +#1691 = CARTESIAN_POINT ( 'NONE', ( 21.10389635281666900, 9.999999999999435100, 17.35167560874896300 ) ) ; +#1692 = CARTESIAN_POINT ( 'NONE', ( 9.377526469242816600, -7.105152569017748800, 19.76776087404596900 ) ) ; +#1693 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -9.999999999999998200, 14.27124344467705300 ) ) ; +#1694 = AXIS2_PLACEMENT_3D ( 'NONE', #684, #522, #453 ) ; +#1695 = ORIENTED_EDGE ( 'NONE', *, *, #731, .F. ) ; +#1696 = ORIENTED_EDGE ( 'NONE', *, *, #2417, .T. ) ; +#1697 = CARTESIAN_POINT ( 'NONE', ( 14.82922667851003200, -9.999999999999994700, 15.03673185473630300 ) ) ; +#1698 = DIRECTION ( 'NONE', ( -1.335906693713116500E-016, -0.2588190451025144700, 0.9659258262890699800 ) ) ; +#1699 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1700 = EDGE_CURVE ( 'NONE', #2677, #1342, #2719, .T. ) ; +#1701 = ORIENTED_EDGE ( 'NONE', *, *, #2296, .T. ) ; +#1702 = AXIS2_PLACEMENT_3D ( 'NONE', #3829, #2695, #582 ) ; +#1703 = CARTESIAN_POINT ( 'NONE', ( 5.473341516079653200, 0.9910615894288830100, -28.40301023840807900 ) ) ; +#1704 = ORIENTED_EDGE ( 'NONE', *, *, #1676, .T. ) ; +#1705 = ORIENTED_EDGE ( 'NONE', *, *, #1775, .F. ) ; +#1706 = EDGE_CURVE ( 'NONE', #197, #3228, #1067, .T. ) ; +#1707 = CARTESIAN_POINT ( 'NONE', ( 16.15137585927733700, -9.999999999999998200, 14.69981776350269900 ) ) ; +#1708 = CARTESIAN_POINT ( 'NONE', ( 24.22142619904371900, 5.242566062033653800, 17.54727368663202500 ) ) ; +#1709 = CARTESIAN_POINT ( 'NONE', ( 8.856254383158310300, -6.524255011832828200, 20.06062420243686300 ) ) ; +#1710 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1711 = FACE_OUTER_BOUND ( 'NONE', #2829, .T. ) ; +#1712 = CARTESIAN_POINT ( 'NONE', ( 17.12849556873185000, -9.999999999999998200, 14.39245831977536700 ) ) ; +#1713 = VECTOR ( 'NONE', #3634, 1000.000000000000000 ) ; +#1714 = CIRCLE ( 'NONE', #3174, 5.000000000000000000 ) ; +#1715 = CARTESIAN_POINT ( 'NONE', ( 8.592979838998426000, -6.225936000117349600, 20.18752835263081400 ) ) ; +#1716 = FACE_OUTER_BOUND ( 'NONE', #3067, .T. ) ; +#1717 = EDGE_CURVE ( 'NONE', #2775, #1913, #3619, .T. ) ; +#1718 = CARTESIAN_POINT ( 'NONE', ( 8.041767845556872600, -5.615826729133274000, 20.37241298660109100 ) ) ; +#1719 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1720 = CARTESIAN_POINT ( 'NONE', ( 3.333333333333340100, -4.913000608485464000, 18.24465176069331900 ) ) ; +#1721 = CARTESIAN_POINT ( 'NONE', ( 13.02920000000000100, -1.925929944387235900E-031, 16.50000000000000000 ) ) ; +#1722 = CARTESIAN_POINT ( 'NONE', ( 14.96201839733001100, -8.281219051249914600, 18.88001408658782400 ) ) ; +#1723 = EDGE_CURVE ( 'NONE', #1749, #2599, #182, .T. ) ; +#1724 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #2840, #1312, ( #1729 ) ) ; +#1725 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1726 = PLANE ( 'NONE', #1945 ) ; +#1727 = ORIENTED_EDGE ( 'NONE', *, *, #209, .T. ) ; +#1728 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.999423642752413200, 12.59359090277150600 ) ) ; +#1729 = SECURITY_CLASSIFICATION ( '', '', #1323 ) ; +#1730 = CARTESIAN_POINT ( 'NONE', ( 16.80775964860351100, -9.999999999999998200, 14.51368510905947900 ) ) ; +#1731 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #800, #871, #769, #765, #762, #757 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 5.768538676928916700E-007, 0.003036348628971350200, 0.006072120404075009900 ), + .UNSPECIFIED. ) ; +#1732 = CARTESIAN_POINT ( 'NONE', ( 24.27547607843737500, -9.310872980100661800, 15.11522281459598100 ) ) ; +#1733 = ORIENTED_EDGE ( 'NONE', *, *, #680, .T. ) ; +#1734 = VERTEX_POINT ( 'NONE', #1399 ) ; +#1735 = ADVANCED_FACE ( 'NONE', ( #1711 ), #2356, .F. ) ; +#1736 = ORIENTED_EDGE ( 'NONE', *, *, #2993, .T. ) ; +#1737 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 4.999999999999995600, 8.356123307600421000E-016 ) ) ; +#1738 = ORIENTED_EDGE ( 'NONE', *, *, #491, .T. ) ; +#1739 = MANIFOLD_SOLID_BREP ( 'Fillet9', #3733 ) ; +#1740 = CARTESIAN_POINT ( 'NONE', ( 21.56506666666667000, 4.913000608485470300, 18.24465176069333000 ) ) ; +#1741 = EDGE_LOOP ( 'NONE', ( #467, #2045, #867, #1229 ) ) ; +#1742 = ORIENTED_EDGE ( 'NONE', *, *, #137, .T. ) ; +#1743 = CARTESIAN_POINT ( 'NONE', ( 5.653142138240735200, 3.069885274310030000, -27.44931380205091300 ) ) ; +#1744 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 22.50000000000000400 ) ) ; +#1745 = EDGE_CURVE ( 'NONE', #2047, #2503, #89, .T. ) ; +#1746 = CARTESIAN_POINT ( 'NONE', ( -1.301042606982605500E-015, -4.688437913382171200, 17.08773323077998500 ) ) ; +#1747 = VERTEX_POINT ( 'NONE', #1487 ) ; +#1748 = CARTESIAN_POINT ( 'NONE', ( 12.44919999999999800, 12.65496680558646100, -55.06972082365662400 ) ) ; +#1749 = VERTEX_POINT ( 'NONE', #1306 ) ; +#1750 = CARTESIAN_POINT ( 'NONE', ( 16.80376201630025100, 10.00000000000000200, 14.49862145917810200 ) ) ; +#1751 = EDGE_CURVE ( 'NONE', #1054, #2455, #3245, .T. ) ; +#1752 = ORIENTED_EDGE ( 'NONE', *, *, #615, .T. ) ; +#1753 = AXIS2_PLACEMENT_3D ( 'NONE', #108, #105, #100 ) ; +#1754 = CONICAL_SURFACE ( 'NONE', #2725, 4.999999999999997300, 0.7853981633974423900 ) ; +#1755 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000031400, -4.999999999999971600, 20.42893218813457100 ) ) ; +#1756 = CARTESIAN_POINT ( 'NONE', ( 21.32942369399698300, 5.960521729848161400, 18.11286642393776700 ) ) ; +#1757 = CARTESIAN_POINT ( 'NONE', ( 9.181338429774630300, -8.076069838900888700, 18.89202875594809700 ) ) ; +#1759 = CARTESIAN_POINT ( 'NONE', ( 90.32016550602631400, 24.01142209705481200, -59.79133915250319800 ) ) ; +#1758 = LINE ( 'NONE', #3492, #3398 ) ; +#1760 = ADVANCED_FACE ( 'NONE', ( #1522 ), #3164, .T. ) ; +#1761 = AXIS2_PLACEMENT_3D ( 'NONE', #2741, #2901, #3773 ) ; +#1762 = CARTESIAN_POINT ( 'NONE', ( 3.050177338882242400, 0.9188972291233094000, -28.26564313184023500 ) ) ; +#1763 = CARTESIAN_POINT ( 'NONE', ( 5.782533333333336900, 6.666666666666668700, 18.68082896311803200 ) ) ; +#1764 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -4.014749828072290900, 13.61697764103997200 ) ) ; +#1765 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -9.999999999999998200, 14.27124344467705300 ) ) ; +#1766 = DIRECTION ( 'NONE', ( -0.7071067811865475700, -0.7071067811865475700, -3.679904200040096900E-016 ) ) ; +#1767 = CARTESIAN_POINT ( 'NONE', ( 7.751561400997937700, -5.302361400997879700, 20.42893218813457100 ) ) ; +#1768 = CARTESIAN_POINT ( 'NONE', ( 17.55174418441629700, 7.428404836816992200, 18.84439639491622400 ) ) ; +#1769 = CARTESIAN_POINT ( 'NONE', ( 2.530204006159676700, 10.00000000000000400, 12.77086699763029600 ) ) ; +#1770 = AXIS2_PLACEMENT_3D ( 'NONE', #1429, #1262, #721 ) ; +#1771 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000002900, -1.925929944387235900E-031, 22.50000000000003200 ) ) ; +#1772 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 8.881784197001252300E-016, 1.000000000000000000 ) ) ; +#1773 = CARTESIAN_POINT ( 'NONE', ( 23.63958512944823600, 10.00000000000000200, 12.57081540354582900 ) ) ; +#1774 = CARTESIAN_POINT ( 'NONE', ( 3.110336380695462500, -4.057423602703933000, 18.33040998721397900 ) ) ; +#1775 = EDGE_CURVE ( 'NONE', #2453, #3783, #3, .T. ) ; +#1776 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.298510400299580000E-032, 1.325001034533938600E-016 ) ) ; +#1777 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1778 = CARTESIAN_POINT ( 'NONE', ( 9.342735455630022300E-013, -3.872445006660216300, 17.06844473939600700 ) ) ; +#1779 = ORIENTED_EDGE ( 'NONE', *, *, #1102, .T. ) ; +#1780 = EDGE_CURVE ( 'NONE', #1196, #2543, #2007, .T. ) ; +#1781 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1782 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025143600 ) ) ; +#1783 = CC_DESIGN_APPROVAL ( #1819, ( #1831 ) ) ; +#1784 = ORIENTED_EDGE ( 'NONE', *, *, #3050, .F. ) ; +#1785 = CARTESIAN_POINT ( 'NONE', ( 5.782533333333335100, 6.666666666666669600, 18.68082896311803200 ) ) ; +#1786 = ORIENTED_EDGE ( 'NONE', *, *, #580, .T. ) ; +#1787 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -3.350970262239431700, 13.74582001120642800 ) ) ; +#1788 = ORIENTED_EDGE ( 'NONE', *, *, #774, .F. ) ; +#1789 = ORIENTED_EDGE ( 'NONE', *, *, #270, .T. ) ; +#1790 = CARTESIAN_POINT ( 'NONE', ( 23.25134047251875900, -9.999999999998857800, 17.27481323466015100 ) ) ; +#1791 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999995800, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#1792 = EDGE_LOOP ( 'NONE', ( #1003, #1140, #1182, #1232 ) ) ; +#1793 = CARTESIAN_POINT ( 'NONE', ( 2.960376345320173000, -3.236115230390081100, 18.37193724202227700 ) ) ; +#1794 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000100, 4.999999999999992000, -24.44661701239527600 ) ) ; +#1795 = DIRECTION ( 'NONE', ( 1.060000827627150900E-016, -1.588080900582084500E-016, -1.000000000000000000 ) ) ; +#1796 = VERTEX_POINT ( 'NONE', #1288 ) ; +#1797 = CARTESIAN_POINT ( 'NONE', ( 19.06357827766150200, 24.01142209705481200, -59.79133915250319800 ) ) ; +#1798 = VERTEX_POINT ( 'NONE', #1198 ) ; +#1799 = CARTESIAN_POINT ( 'NONE', ( 16.15778234784463800, 1.223557112464053900, -24.49699116221560800 ) ) ; +#1800 = ORIENTED_EDGE ( 'NONE', *, *, #987, .F. ) ; +#1801 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999996700, -3.061616997868381200E-016, 2.500000000000002200 ) ) ; +#1802 = EDGE_CURVE ( 'NONE', #3567, #2261, #1292, .T. ) ; +#1803 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 8.988372880617703200, 12.68459017141276100 ) ) ; +#1804 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, 4.999999999999986700, -22.46941544652785800 ) ) ; +#1805 = CARTESIAN_POINT ( 'NONE', ( 18.05434278210719500, -9.999999999999998200, 14.04252096809089400 ) ) ; +#1806 = APPROVAL_DATE_TIME ( #258, #1819 ) ; +#1807 = CARTESIAN_POINT ( 'NONE', ( 19.94920000000000100, 19.65546469306329800, -53.19394306809147800 ) ) ; +#1808 = EDGE_CURVE ( 'NONE', #3228, #1558, #755, .T. ) ; +#1809 = CARTESIAN_POINT ( 'NONE', ( 3.665359411447684100E-013, -3.079884937327053600, 17.05707153868166500 ) ) ; +#1810 = EDGE_CURVE ( 'NONE', #1363, #2689, #617, .T. ) ; +#1811 = FACE_OUTER_BOUND ( 'NONE', #3745, .T. ) ; +#1812 = CARTESIAN_POINT ( 'NONE', ( 16.37496121009203500, -0.6742693224719635800, -25.13342253093244200 ) ) ; +#1813 = CARTESIAN_POINT ( 'NONE', ( 19.06357827766153100, 13.40741737109300400, -20.21665475151220500 ) ) ; +#1814 = LINE ( 'NONE', #776, #760 ) ; +#1815 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2242, #1566, #469 ), + ( #415, #187, #3821 ), + ( #3787, #3763, #3755 ), + ( #3741, #3728, #3719 ), + ( #3705, #3694, #3681 ), + ( #3673, #3657, #3645 ), + ( #3632, #3628, #3621 ), + ( #3615, #3600, #3587 ), + ( #3578, #3564, #3552 ), + ( #3542, #3529, #3513 ), + ( #3499, #3494, #3483 ), + ( #3469, #3456, #3446 ), + ( #3414, #3404, #3394 ), + ( #3376, #3360, #3352 ), + ( #3335, #3329, #3319 ), + ( #3313, #3299, #3291 ), + ( #3274, #3262, #3254 ), + ( #3239, #3225, #3213 ), + ( #3201, #3189, #3171 ), + ( #3160, #3143, #3121 ), + ( #3108, #3095, #3085 ), + ( #3073, #3058, #3041 ), + ( #3037, #3029, #3011 ), + ( #2994, #2983, #2973 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 1.301042606982605300E-018, 0.001797250122471905500, 0.002695875183707857400, 0.003594500244943809600, 0.005391750367415714000, 0.006290375428651666200, 0.007189000489887618400, 0.008986250612359521900, 0.009884875673595474100, 0.01078350073483142600, 0.01258075085730333100, 0.01437800097977523500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7081472959999892700, 1.000000000000000000), + ( 1.000000000000000000, 0.7092259342583932000, 1.000000000000000000), + ( 1.000000000000000000, 0.7107597525646377500, 1.000000000000000000), + ( 1.000000000000000000, 0.7112571799240146000, 1.000000000000000000), + ( 1.000000000000000000, 0.7122030186737926500, 1.000000000000000000), + ( 1.000000000000000000, 0.7126534163092916900, 1.000000000000000000), + ( 1.000000000000000000, 0.7138843621716672900, 1.000000000000000000), + ( 1.000000000000000000, 0.7145412435119186100, 1.000000000000000000), + ( 1.000000000000000000, 0.7152139760617668400, 1.000000000000000000), + ( 1.000000000000000000, 0.7153863664220261300, 1.000000000000000000), + ( 1.000000000000000000, 0.7156185823422540600, 1.000000000000000000), + ( 1.000000000000000000, 0.7156779038486608100, 1.000000000000000000), + ( 1.000000000000000000, 0.7156784472952497600, 1.000000000000000000), + ( 1.000000000000000000, 0.7154451459347298500, 1.000000000000000000), + ( 1.000000000000000000, 0.7147760168879703200, 1.000000000000000000), + ( 1.000000000000000000, 0.7144999465417395400, 1.000000000000000000), + ( 1.000000000000000000, 0.7138494664070876800, 1.000000000000000000), + ( 1.000000000000000000, 0.7134761448631558000, 1.000000000000000000), + ( 1.000000000000000000, 0.7122531880106518500, 1.000000000000000000), + ( 1.000000000000000000, 0.7112941503043639400, 1.000000000000000000), + ( 1.000000000000000000, 0.7092436217107567200, 1.000000000000000000), + ( 1.000000000000000000, 0.7081463333851992800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865474600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1816 = DIRECTION ( 'NONE', ( 1.353930517835556500E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1817 = CARTESIAN_POINT ( 'NONE', ( 14.31594603346368700, 23.65033651208944200, -63.95667449009936700 ) ) ; +#1818 = VECTOR ( 'NONE', #310, 1000.000000000000000 ) ; +#1819 = APPROVAL ( #1371, 'UNSPECIFIED' ) ; +#1820 = CARTESIAN_POINT ( 'NONE', ( 17.39397646379285000, -1.521289633275709500, -23.61746698137077900 ) ) ; +#1821 = CARTESIAN_POINT ( 'NONE', ( 11.40526348944505300, -9.999999999999998200, 15.32111431373162300 ) ) ; +#1822 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -2.683087480787426300, 13.83696572197415600 ) ) ; +#1823 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890699800, -0.2588190451025143000 ) ) ; +#1824 = ADVANCED_FACE ( 'NONE', ( #1422 ), #1138, .F. ) ; +#1825 = CARTESIAN_POINT ( 'NONE', ( 2.759288078941590300, -1.608993828836131600, 18.42442587874803600 ) ) ; +#1826 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000001200, -19.75971928798616200, -31.08096380043227600 ) ) ; +#1827 = CARTESIAN_POINT ( 'NONE', ( 5.252156425230285000, 1.268874766166655700, -28.97813429349545800 ) ) ; +#1828 = CARTESIAN_POINT ( 'NONE', ( 10.94787335805872700, 12.82990441622168200, -17.95625033324466100 ) ) ; +#1829 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 4.014749828072292600, 13.61697764103997500 ) ) ; +#1830 = CARTESIAN_POINT ( 'NONE', ( 9.779022321579310200, 23.80782873407220600, -63.59304148676452000 ) ) ; +#1831 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #587, .NOT_KNOWN. ) ; +#1832 = CARTESIAN_POINT ( 'NONE', ( 16.74102330779652800, 1.417514824315708700, -24.78852767895405100 ) ) ; +#1833 = EDGE_CURVE ( 'NONE', #1747, #3183, #3797, .T. ) ; +#1834 = CARTESIAN_POINT ( 'NONE', ( 14.31520003589091100, 4.999999999999987600, -22.46941544652786100 ) ) ; +#1835 = CARTESIAN_POINT ( 'NONE', ( 10.42588261676246700, 8.746667767669155300, 18.52506489801438100 ) ) ; +#1836 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #437, #1384, ( #520 ) ) ; +#1837 = ORIENTED_EDGE ( 'NONE', *, *, #731, .T. ) ; +#1838 = CARTESIAN_POINT ( 'NONE', ( 5.782533333333336900, -6.666666666666666100, 18.68082896311803500 ) ) ; +#1839 = CARTESIAN_POINT ( 'NONE', ( -3.631332533267854700E-013, -1.530550474266398500, 17.04164934091452500 ) ) ; +#1840 = CARTESIAN_POINT ( 'NONE', ( 16.05836569124363000, 4.999999999999987600, -23.15873341919380100 ) ) ; +#1841 = CARTESIAN_POINT ( 'NONE', ( 16.98379508070754800, -0.4947373741423327600, -25.47068714932948900 ) ) ; +#1842 = VERTEX_POINT ( 'NONE', #1061 ) ; +#1843 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000003800, -1.344975374020025400, -23.93325137991947200 ) ) ; +#1844 = ORIENTED_EDGE ( 'NONE', *, *, #580, .F. ) ; +#1845 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #3340, #1394, ( #520 ) ) ; +#1846 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 8.740062426157990700, 17.09984940044293500 ) ) ; +#1847 = CARTESIAN_POINT ( 'NONE', ( 6.227646150763464800, 24.16294663273443200, -60.35683641825281900 ) ) ; +#1848 = ORIENTED_EDGE ( 'NONE', *, *, #2010, .F. ) ; +#1849 = EDGE_LOOP ( 'NONE', ( #1606, #874, #2507, #2687 ) ) ; +#1850 = CARTESIAN_POINT ( 'NONE', ( 18.17160773830030600, -1.304141690140059100, -24.00610775571068000 ) ) ; +#1851 = ORIENTED_EDGE ( 'NONE', *, *, #3050, .T. ) ; +#1852 = CARTESIAN_POINT ( 'NONE', ( 4.949199999999997600, 10.18853926298077200, -45.86488792146470000 ) ) ; +#1853 = CARTESIAN_POINT ( 'NONE', ( 22.18805865906198000, -0.8342625829602580100, 18.43393695032053300 ) ) ; +#1854 = CARTESIAN_POINT ( 'NONE', ( 17.26499881944694400, 1.648422377470953900, -25.14085142872303500 ) ) ; +#1855 = ORIENTED_EDGE ( 'NONE', *, *, #1556, .T. ) ; +#1856 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -1.342694479243721400, 13.95898460472974800 ) ) ; +#1857 = ORIENTED_EDGE ( 'NONE', *, *, #2285, .F. ) ; +#1858 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1859 = CARTESIAN_POINT ( 'NONE', ( 17.51768974123671500, -0.2826863024876985500, -25.87375807487084600 ) ) ; +#1860 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.773724697258101600, -46.51193553422098900 ) ) ; +#1861 = EDGE_CURVE ( 'NONE', #2677, #1086, #2160, .T. ) ; +#1862 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, 12.93374564363917600, -28.10814606143646100 ) ) ; +#1864 = CARTESIAN_POINT ( 'NONE', ( 23.81667269136964300, 8.804794917712138500, 15.87576742744232000 ) ) ; +#1863 = VECTOR ( 'NONE', #1823, 1000.000000000000100 ) ; +#1865 = CARTESIAN_POINT ( 'NONE', ( 18.87026509273963600, -1.045185100884327600, -24.47552451716532900 ) ) ; +#1866 = EDGE_CURVE ( 'NONE', #1092, #2998, #3129, .T. ) ; +#1867 = CIRCLE ( 'NONE', #3064, 4.999999999999997300 ) ; +#1868 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1869 = CARTESIAN_POINT ( 'NONE', ( 22.13510036850569300, -1.659954904067641100, 18.42357825588017700 ) ) ; +#1870 = CARTESIAN_POINT ( 'NONE', ( 17.96471544552678900, 2.039064654478764700, -25.75486939778894400 ) ) ; +#1871 = CARTESIAN_POINT ( 'NONE', ( 9.520267811865469600, 5.751797569707353300E-016, 22.50000000000000400 ) ) ; +#1872 = EDGE_CURVE ( 'NONE', #1552, #1194, #668, .T. ) ; +#1873 = LINE ( 'NONE', #1759, #3794 ) ; +#1874 = CARTESIAN_POINT ( 'NONE', ( 2.709996497557105100, -0.8030197090068855700, 18.43401167564035200 ) ) ; +#1875 = CC_DESIGN_APPROVAL ( #1880, ( #520 ) ) ; +#1876 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3386, #3401, #3327, #3321, #3309, #3306, #3298, #3288, #3272, #3267, #3246, #3216, #3210, #3206 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001348209685350327700, 0.002022314528025489100, 0.002696419370700650500, 0.004044629056050973000, 0.004718733898726137000, 0.005392838741401301100 ), + .UNSPECIFIED. ) ; +#1877 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#1878 = CARTESIAN_POINT ( 'NONE', ( 18.21135787416535500, 0.06987784869637893300, -26.55814265744464100 ) ) ; +#1879 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 21.03553390593272000 ) ) ; +#1880 = APPROVAL ( #1414, 'UNSPECIFIED' ) ; +#1881 = CARTESIAN_POINT ( 'NONE', ( 19.80322059396386400, -0.6056405821807850900, -25.29263054673593200 ) ) ; +#1882 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2331, #418, #1091 ), + ( #3407, #1908, #3696 ), + ( #758, #2539, #713 ), + ( #3418, #2826, #994 ), + ( #2690, #578, #287 ), + ( #953, #2788, #673 ), + ( #2476, #375, #2159 ), + ( #102, #1835, #3655 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 0.03756001926301486000, 0.03978849970605913300, 0.04201698014910340600, 0.04647394103519194400 ), + ( 0.5997905187096237400, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 0.9634558039606149200, 0.9695358671907606800, 1.000000000000000000), + ( 0.9668597682132188400, 0.9723734947844138200, 1.000000000000000000), + ( 0.9703618919239138700, 0.9752929504955755200, 1.000000000000000000), + ( 0.9770262534397118300, 0.9808485247401764800, 1.000000000000000000), + ( 0.9801940573404447400, 0.9834892833066406500, 1.000000000000000000), + ( 0.9888379578832000600, 0.9906950495476205500, 1.000000000000000000), + ( 0.9934360502067010000, 0.9945281314154310600, 1.000000000000000000), + ( 0.9963097891317029800, 0.9969237502484733500, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1883 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1884 = CARTESIAN_POINT ( 'NONE', ( 21.56506666666666700, -4.913000608485471200, 18.24465176069331600 ) ) ; +#1885 = CARTESIAN_POINT ( 'NONE', ( 18.18481185164170500, 2.177750199731798700, -25.97557271302191500 ) ) ; +#1886 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 9.999423642752413200, 12.59359090277150600 ) ) ; +#1887 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 7.987988261658157000, 12.83796693380418800 ) ) ; +#1888 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1889 = CARTESIAN_POINT ( 'NONE', ( 18.42718017290004800, 0.1950973261428035300, -26.80342402907564300 ) ) ; +#1890 = CARTESIAN_POINT ( 'NONE', ( 23.30835455094673100, -8.237020314306844800, 16.54820373758698800 ) ) ; +#1891 = CARTESIAN_POINT ( 'NONE', ( -0.04661581392126459100, -9.999999999999998200, 12.51556264434846200 ) ) ; +#1892 = VERTEX_POINT ( 'NONE', #792 ) ; +#1893 = AXIS2_PLACEMENT_3D ( 'NONE', #2245, #460, #2570 ) ; +#1894 = CARTESIAN_POINT ( 'NONE', ( 20.09668246859661500, -0.4493730588910915800, -25.58619162937500100 ) ) ; +#1895 = ORIENTED_EDGE ( 'NONE', *, *, #1810, .F. ) ; +#1896 = ORIENTED_EDGE ( 'NONE', *, *, #1676, .F. ) ; +#1897 = EDGE_CURVE ( 'NONE', #3370, #3647, #2426, .T. ) ; +#1898 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#1899 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1905477654108792600, 0.9816779253385096200 ) ) ; +#1900 = AXIS2_PLACEMENT_3D ( 'NONE', #1578, #1551, #1471 ) ; +#1901 = CARTESIAN_POINT ( 'NONE', ( 18.58876065757086200, 2.465272999235605100, -26.44044952020609800 ) ) ; +#1902 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999998500, -4.999999999999997300, 7.499999999999998200 ) ) ; +#1903 = ORIENTED_EDGE ( 'NONE', *, *, #423, .F. ) ; +#1904 = EDGE_LOOP ( 'NONE', ( #2549, #2593, #2598, #2632, #2726 ) ) ; +#1905 = CARTESIAN_POINT ( 'NONE', ( 2.192570919100877900E-013, -0.7611698365540211500, 17.03777215273476000 ) ) ; +#1906 = PLANE ( 'NONE', #3342 ) ; +#1907 = CARTESIAN_POINT ( 'NONE', ( 18.81707656305773600, 0.4532539624618612300, -27.31466127774706700 ) ) ; +#1908 = CARTESIAN_POINT ( 'NONE', ( 6.940977498801616200, 5.996409224263643100, 19.36499689277719600 ) ) ; +#1909 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #167, #206, #282 ), + ( #151, #141, #130 ), + ( #116, #103, #90 ), + ( #84, #76, #69 ), + ( #61, #57, #49 ), + ( #44, #29, #17 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( 6.312225048210606800E-015, 0.001045545094505371100, 0.002091090189004430000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9198317473328770900, 1.000000000000000000), + ( 1.000000000000000000, 0.9224418726314522800, 1.000000000000000000), + ( 1.000000000000000000, 0.9238718997686856700, 1.000000000000000000), + ( 1.000000000000000000, 0.9238871032909858900, 1.000000000000000000), + ( 1.000000000000000000, 0.9224510129883289900, 1.000000000000000000), + ( 1.000000000000000000, 0.9198317473328674300, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1910 = CARTESIAN_POINT ( 'NONE', ( 1.258814870551592900, -9.999999999999998200, 12.57081540354978200 ) ) ; +#1911 = EDGE_LOOP ( 'NONE', ( #1848, #1851, #1903 ) ) ; +#1912 = CARTESIAN_POINT ( 'NONE', ( 22.09106016977800000, -2.181612988304930700, 18.39472323545828300 ) ) ; +#1913 = VERTEX_POINT ( 'NONE', #645 ) ; +#1914 = ORIENTED_EDGE ( 'NONE', *, *, #1575, .T. ) ; +#1915 = ORIENTED_EDGE ( 'NONE', *, *, #1360, .F. ) ; +#1916 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9816779253385097300, -0.1905477654108792600 ) ) ; +#1917 = EDGE_LOOP ( 'NONE', ( #3479, #567, #667, #830, #1058, #1104, #1521, #2017, #2057, #3102, #3138, #3109, #3105 ) ) ; +#1918 = CARTESIAN_POINT ( 'NONE', ( 20.63528087702014700, -0.1248046114396519800, -26.20415816139574300 ) ) ; +#1919 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -10.00000000000000500, -7.499999999999995600 ) ) ; +#1920 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -0.6698300914867779700, 13.98921892688542800 ) ) ; +#1921 = CARTESIAN_POINT ( 'NONE', ( 18.77147337899782900, 2.613033397753914400, -26.68284672137898600 ) ) ; +#1922 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1923 = CARTESIAN_POINT ( 'NONE', ( 3.071041120679244500, -5.814505664803253800, 17.98964982364994500 ) ) ; +#1924 = CIRCLE ( 'NONE', #2675, 102.5000000000000300 ) ; +#1925 = FACE_OUTER_BOUND ( 'NONE', #1233, .T. ) ; +#1926 = CARTESIAN_POINT ( 'NONE', ( 18.98983352904865300, 0.5853410053516804300, -27.57894841353632000 ) ) ; +#1927 = EDGE_CURVE ( 'NONE', #3510, #1106, #1684, .T. ) ; +#1929 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1928 = FACE_OUTER_BOUND ( 'NONE', #2555, .T. ) ; +#1930 = DIRECTION ( 'NONE', ( -4.007720081139350800E-016, 0.2588190451025144700, -0.9659258262890699800 ) ) ; +#1931 = CARTESIAN_POINT ( 'NONE', ( 20.87889783863201400, 0.04227784886722189100, -26.52620413590077700 ) ) ; +#1932 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -9.184850993605144000E-016, 7.500000000000000000 ) ) ; +#1933 = EDGE_CURVE ( 'NONE', #2088, #126, #3663, .T. ) ; +#1934 = CARTESIAN_POINT ( 'NONE', ( 2.710552124494211700, 0.8164770996085849400, 18.43389127484427800 ) ) ; +#1935 = EDGE_CURVE ( 'NONE', #3467, #1270, #2972, .T. ) ; +#1936 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1937 = CARTESIAN_POINT ( 'NONE', ( 19.09972346534143700, 2.915337851730150000, -27.18727870862119300 ) ) ; +#1938 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1939 = ADVANCED_FACE ( 'NONE', ( #1247 ), #611, .T. ) ; +#1940 = CARTESIAN_POINT ( 'NONE', ( 19.29401017137684700, 0.8542212375339588400, -28.12305054878323700 ) ) ; +#1941 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#1942 = CARTESIAN_POINT ( 'NONE', ( 90.32016550602631400, 24.01142209705481200, -59.79133915250319800 ) ) ; +#1943 = CARTESIAN_POINT ( 'NONE', ( 5.399933003990081000, 3.385087845953870500, -27.99374035210555400 ) ) ; +#1944 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1945 = AXIS2_PLACEMENT_3D ( 'NONE', #1744, #1719, #1710 ) ; +#1946 = CARTESIAN_POINT ( 'NONE', ( -2.201328262848231700E-013, 0.7739553836904140600, 17.03781540935754900 ) ) ; +#1947 = ADVANCED_FACE ( 'NONE', ( #2885 ), #486, .T. ) ; +#1948 = CARTESIAN_POINT ( 'NONE', ( 5.201887282158691200, 5.894115778564526800E-012, 20.25268728215868900 ) ) ; +#1949 = ORIENTED_EDGE ( 'NONE', *, *, #1261, .F. ) ; +#1950 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1212, #1426, #1440, #1154, #1197, #1098, #1056, #952, #957, #947, #812, #878, #884, #851, #804, #727, #722, #689, #640, #616 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001371930648718649700, 0.002743861297437299400, 0.004115791946155949300, 0.004801757270515274500, 0.005487722594874599700, 0.006859653243593250000, 0.008231583892311900400, 0.009603514541030552500, 0.01097544518974920500 ), + .UNSPECIFIED. ) ; +#1951 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #1591 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #1526, #1512, #1508 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#1952 = ORIENTED_EDGE ( 'NONE', *, *, #37, .F. ) ; +#1953 = ORIENTED_EDGE ( 'NONE', *, *, #1527, .T. ) ; +#1954 = CARTESIAN_POINT ( 'NONE', ( 2.906736013997697700, 1.102603856714066400, -28.64104685816391400 ) ) ; +#1955 = EDGE_CURVE ( 'NONE', #1796, #2348, #2797, .T. ) ; +#1956 = ORIENTED_EDGE ( 'NONE', *, *, #1549, .T. ) ; +#1957 = VERTEX_POINT ( 'NONE', #446 ) ; +#1958 = CARTESIAN_POINT ( 'NONE', ( 18.17322024036658900, 7.159141310379083300, 18.80105982760486300 ) ) ; +#1959 = AXIS2_PLACEMENT_3D ( 'NONE', #1932, #2015, #1944 ) ; +#1960 = CARTESIAN_POINT ( 'NONE', ( 5.162575623074774400, 1.410208604939404700, -29.27417532835561100 ) ) ; +#1961 = CARTESIAN_POINT ( 'NONE', ( 13.49313651055454800, 10.00000000000000400, 15.32111431373177100 ) ) ; +#1962 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.6810554270232690400, 13.98887974594864900 ) ) ; +#1963 = EDGE_LOOP ( 'NONE', ( #2433, #2440, #2443, #2448, #2489, #2493, #2501, #2533, #2540, #2544, #2550, #2556, #2582 ) ) ; +#1964 = VERTEX_POINT ( 'NONE', #407 ) ; +#1965 = CARTESIAN_POINT ( 'NONE', ( 18.91366609406729200, 9.258875497144928900E-016, 21.03553390593272000 ) ) ; +#1966 = CARTESIAN_POINT ( 'NONE', ( 4.259177259639411500, -0.1221100009752777300, -26.20935023125301600 ) ) ; +#1967 = AXIS2_PLACEMENT_3D ( 'NONE', #2063, #2116, #2071 ) ; +#1968 = ORIENTED_EDGE ( 'NONE', *, *, #2078, .T. ) ; +#1969 = ORIENTED_EDGE ( 'NONE', *, *, #2391, .T. ) ; +#1970 = CARTESIAN_POINT ( 'NONE', ( 5.292352010373718900, 3.546184422915370100, -28.27700725171491700 ) ) ; +#1971 = EDGE_LOOP ( 'NONE', ( #2207, #2233 ) ) ; +#1972 = ADVANCED_FACE ( 'NONE', ( #3487 ), #1006, .T. ) ; +#1973 = CIRCLE ( 'NONE', #1753, 0.5800000000000006300 ) ; +#1974 = CARTESIAN_POINT ( 'NONE', ( 15.82083856389999700, 10.00000000000000200, 14.78404628562361400 ) ) ; +#1975 = CARTESIAN_POINT ( 'NONE', ( 7.488416291753869900, 21.11132182176493500, -58.62727584096748500 ) ) ; +#1976 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1977 = CARTESIAN_POINT ( 'NONE', ( 2.760782716635203000, 1.626733407142017200, 18.42409523714344400 ) ) ; +#1978 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1979 = CARTESIAN_POINT ( 'NONE', ( 2.710341340938023700, 0.8342625829602596800, 18.43393695032053300 ) ) ; +#1980 = EDGE_CURVE ( 'NONE', #999, #2950, #1152, .T. ) ; +#1981 = CYLINDRICAL_SURFACE ( 'NONE', #1287, 100.0000000000000000 ) ; +#1982 = CARTESIAN_POINT ( 'NONE', ( 2.565325889586021400, 1.648816273553611600, -29.77571325620358100 ) ) ; +#1983 = EDGE_CURVE ( 'NONE', #1798, #1012, #1973, .T. ) ; +#1984 = CARTESIAN_POINT ( 'NONE', ( 17.79150681176265200, 6.333113695536314800, 19.22467256674337600 ) ) ; +#1985 = CARTESIAN_POINT ( 'NONE', ( 4.960541884464452900, 1.829776032711453600, -30.16351812766584200 ) ) ; +#1986 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.014749828072290900, 13.61697764103997500 ) ) ; +#1987 = CARTESIAN_POINT ( 'NONE', ( -7.257791400040276300E-014, 1.547420437461375100, 17.04176387706139900 ) ) ; +#1988 = AXIS2_PLACEMENT_3D ( 'NONE', #1791, #1776, #1772 ) ; +#1989 = CARTESIAN_POINT ( 'NONE', ( 19.06357827766153100, 13.40741737109300400, -20.21665475151220500 ) ) ; +#1990 = ADVANCED_FACE ( 'NONE', ( #568 ), #1754, .T. ) ; +#1991 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.298510400299580000E-032, 1.325001034533938600E-016 ) ) ; +#1992 = CARTESIAN_POINT ( 'NONE', ( 15.26306635468820100, -7.387764451434812000, 19.60152928809444400 ) ) ; +#1993 = CARTESIAN_POINT ( 'NONE', ( 5.036294417438629300, 4.023986577406391000, -29.13376742292742700 ) ) ; +#1994 = ORIENTED_EDGE ( 'NONE', *, *, #2289, .T. ) ; +#1995 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025144100, 0.9659258262890699800 ) ) ; +#1996 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890698700, 0.2588190451025151900 ) ) ; +#1997 = CARTESIAN_POINT ( 'NONE', ( 2.449200001602390000, 2.011483039068770600, -30.55344360303971700 ) ) ; +#1998 = CARTESIAN_POINT ( 'NONE', ( 19.11586666666666500, -6.666666666666666100, 18.68082896311803500 ) ) ; +#1999 = EDGE_LOOP ( 'NONE', ( #23, #75, #172, #201 ) ) ; +#2000 = ORIENTED_EDGE ( 'NONE', *, *, #1872, .T. ) ; +#2001 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.357441697508542600, 13.95806983198240800 ) ) ; +#2002 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9659258262890699800, -0.2588190451025143600 ) ) ; +#2003 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 4.014749828072292600, 13.61697764103997300 ) ) ; +#2004 = ORIENTED_EDGE ( 'NONE', *, *, #1810, .T. ) ; +#2005 = ORIENTED_EDGE ( 'NONE', *, *, #2006, .T. ) ; +#2006 = EDGE_CURVE ( 'NONE', #1194, #1096, #337, .T. ) ; +#2007 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1173, #1242, #1132, #1127, #1111, #1101 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 8.628806300843013600E-015, 0.001767984876993335400, 0.003535969753978042200 ), + .UNSPECIFIED. ) ; +#2008 = CARTESIAN_POINT ( 'NONE', ( 4.913864909936781300, 2.103317520197839100, -30.75749669018335200 ) ) ; +#2009 = VERTEX_POINT ( 'NONE', #77 ) ; +#2010 = EDGE_CURVE ( 'NONE', #2543, #1559, #3525, .T. ) ; +#2011 = CARTESIAN_POINT ( 'NONE', ( 12.44919999999999800, 12.65496680558646100, -55.06972082365662400 ) ) ; +#2012 = CARTESIAN_POINT ( 'NONE', ( 18.69920000000000100, 10.00000000000000000, 17.57843258350778400 ) ) ; +#2013 = ORIENTED_EDGE ( 'NONE', *, *, #2343, .T. ) ; +#2014 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000004700, 4.339671145743452900, -29.72176410043295300 ) ) ; +#2015 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2016 = CARTESIAN_POINT ( 'NONE', ( 2.963062919220160300, 3.252089927223675000, 18.37117524896580200 ) ) ; +#2017 = ORIENTED_EDGE ( 'NONE', *, *, #1427, .T. ) ; +#2018 = ORIENTED_EDGE ( 'NONE', *, *, #2452, .T. ) ; +#2019 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2020 = PERSON_AND_ORGANIZATION ( #2275, #3296 ) ; +#2021 = CARTESIAN_POINT ( 'NONE', ( 2.449200000000004300, 2.371521134422850200, -31.35343597986623700 ) ) ; +#2022 = VECTOR ( 'NONE', #937, 1000.000000000000000 ) ; +#2024 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -9.184850993605144000E-016, 12.49999999999999600 ) ) ; +#2023 = CIRCLE ( 'NONE', #3247, 7.500000000000002700 ) ; +#2025 = CARTESIAN_POINT ( 'NONE', ( 18.66091484439135000, 10.00000000000000200, 13.82017794451304700 ) ) ; +#2026 = CARTESIAN_POINT ( 'NONE', ( 12.44919999998348100, 11.02205614447055000, -20.85581036584213200 ) ) ; +#2027 = CARTESIAN_POINT ( 'NONE', ( 7.317683969262683400E-014, 3.095173584658570000, 17.05727900851913100 ) ) ; +#2028 = FACE_OUTER_BOUND ( 'NONE', #3425, .T. ) ; +#2029 = DIRECTION ( 'NONE', ( 0.3535533905932730100, 0.0000000000000000000, -0.9354143466934857800 ) ) ; +#2030 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000100, 1.598781742594243900, -25.35797069774911700 ) ) ; +#2031 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000004700, 4.651280611074645900, -30.32742587825108100 ) ) ; +#2032 = EDGE_CURVE ( 'NONE', #3311, #2088, #2845, .T. ) ; +#2033 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999996700, -10.00000000000000400, 2.575100671227105700E-015 ) ) ; +#2034 = AXIS2_PLACEMENT_3D ( 'NONE', #3273, #2907, #2899 ) ; +#2035 = DIRECTION ( 'NONE', ( 0.9354143466934856700, -0.0000000000000000000, 0.3535533905932731800 ) ) ; +#2036 = CARTESIAN_POINT ( 'NONE', ( 21.74529062234266500, -6.442249666512285700, 17.86805059417665100 ) ) ; +#2037 = CARTESIAN_POINT ( 'NONE', ( 10.68267058978146300, 8.460904434018118500, 18.85664821965721700 ) ) ; +#2038 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.696110671938368500, 13.83534352970696400 ) ) ; +#2039 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000000300, 5.000000000000001800, 14.27124344467704900 ) ) ; +#2040 = CARTESIAN_POINT ( 'NONE', ( 16.92831272939243100, -10.00000000000029100, 17.45812994664223100 ) ) ; +#2041 = ORIENTED_EDGE ( 'NONE', *, *, #1211, .T. ) ; +#2042 = CARTESIAN_POINT ( 'NONE', ( 5.168780852463977600, 3.770735242555957700, -28.67877291308312900 ) ) ; +#2043 = ORIENTED_EDGE ( 'NONE', *, *, #1833, .T. ) ; +#2044 = CARTESIAN_POINT ( 'NONE', ( 11.26898467956185700, 8.509720309396078300, 18.92869372267616500 ) ) ; +#2045 = ORIENTED_EDGE ( 'NONE', *, *, #285, .F. ) ; +#2046 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999994000, 22.07027925878596300, -52.54689545533519600 ) ) ; +#2047 = VERTEX_POINT ( 'NONE', #3827 ) ; +#2048 = CARTESIAN_POINT ( 'NONE', ( 11.86181345387697700, 8.535603303660302300, 18.96456423728268000 ) ) ; +#2049 = CARTESIAN_POINT ( 'NONE', ( 3.113079144398959400, 4.067946820452209300, 18.32935519908727100 ) ) ; +#2050 = ORIENTED_EDGE ( 'NONE', *, *, #2290, .F. ) ; +#2051 = ORIENTED_EDGE ( 'NONE', *, *, #221, .F. ) ; +#2052 = CARTESIAN_POINT ( 'NONE', ( 14.16258672849440700, -9.999999999999998200, 15.18429198848495100 ) ) ; +#2053 = CARTESIAN_POINT ( 'NONE', ( 6.076304107589456800, 2.645695189748007000, -26.73507087748799200 ) ) ; +#2054 = EDGE_CURVE ( 'NONE', #1298, #3551, #2609, .T. ) ; +#2055 = ORIENTED_EDGE ( 'NONE', *, *, #2394, .T. ) ; +#2056 = CARTESIAN_POINT ( 'NONE', ( 13.04144569722296900, 8.535464221751523100, 18.96436754574505900 ) ) ; +#2057 = ORIENTED_EDGE ( 'NONE', *, *, #12, .T. ) ; +#2058 = VERTEX_POINT ( 'NONE', #3534 ) ; +#2059 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1756, #305, #2396, #3593 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001538722777638042500, 0.003930052513631504400 ), + .UNSPECIFIED. ) ; +#2060 = ADVANCED_FACE ( 'NONE', ( #298 ), #3392, .T. ) ; +#2061 = CARTESIAN_POINT ( 'NONE', ( 13.62946746228193900, 8.509715968122481700, 18.92868731555473600 ) ) ; +#2062 = ORIENTED_EDGE ( 'NONE', *, *, #1802, .T. ) ; +#2063 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#2064 = VECTOR ( 'NONE', #534, 1000.000000000000000 ) ; +#2065 = CARTESIAN_POINT ( 'NONE', ( 1.137553831916077600E-012, 3.882311235832815100, 17.06867795796658900 ) ) ; +#2066 = CARTESIAN_POINT ( 'NONE', ( 23.81667269136963900, -8.804794917712136700, 15.87576742744231600 ) ) ; +#2067 = FACE_OUTER_BOUND ( 'NONE', #3557, .T. ) ; +#2068 = CARTESIAN_POINT ( 'NONE', ( 14.21572941021420700, 8.460904434022321400, 18.85664821965398700 ) ) ; +#2069 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9659258262890699800, 0.2588190451025143000 ) ) ; +#2070 = EDGE_CURVE ( 'NONE', #2458, #2, #2121, .T. ) ; +#2071 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2072 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.359206723477151900, 13.74422127981569900 ) ) ; +#2073 = EDGE_CURVE ( 'NONE', #923, #1092, #2693, .T. ) ; +#2074 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890698700, 0.2588190451025151900 ) ) ; +#2075 = AXIS2_PLACEMENT_3D ( 'NONE', #3350, #3344, #3318 ) ; +#2076 = ADVANCED_FACE ( 'NONE', ( #3345 ), #1025, .F. ) ; +#2077 = DIRECTION ( 'NONE', ( -1.040834085586084300E-016, 8.881784197001252300E-015, 1.000000000000000000 ) ) ; +#2078 = EDGE_CURVE ( 'NONE', #1004, #1658, #261, .T. ) ; +#2079 = AXIS2_PLACEMENT_3D ( 'NONE', #1249, #1235, #1258 ) ; +#2080 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999994000, 10.24015223986378800, -55.71676843641291300 ) ) ; +#2081 = CARTESIAN_POINT ( 'NONE', ( 19.24525786175907200, 3.069885274313088900, -27.44931380204961300 ) ) ; +#2082 = ORIENTED_EDGE ( 'NONE', *, *, #2711, .T. ) ; +#2083 = CARTESIAN_POINT ( 'NONE', ( 3.333333333333330800, 4.913000608485466700, 18.24465176069331600 ) ) ; +#2084 = EDGE_LOOP ( 'NONE', ( #2291, #3098, #780, #1546, #859 ) ) ; +#2085 = ORIENTED_EDGE ( 'NONE', *, *, #1861, .T. ) ; +#2086 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.838808320239663900E-032, 1.060000827627150900E-016 ) ) ; +#2087 = ORIENTED_EDGE ( 'NONE', *, *, #2181, .F. ) ; +#2088 = VERTEX_POINT ( 'NONE', #566 ) ; +#2089 = CARTESIAN_POINT ( 'NONE', ( 10.73581327150404400, -9.999999999999998200, 15.18429198853994500 ) ) ; +#2090 = CARTESIAN_POINT ( 'NONE', ( 3.249079732841250000, 10.00000000000055400, 17.32032696884415300 ) ) ; +#2091 = VERTEX_POINT ( 'NONE', #921 ) ; +#2092 = ORIENTED_EDGE ( 'NONE', *, *, #2391, .F. ) ; +#2093 = CARTESIAN_POINT ( 'NONE', ( 6.309639342428744700, 2.465272999232920500, -26.44044952020734500 ) ) ; +#2094 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000001200, 1.758564121058930900, -25.31515713847477000 ) ) ; +#2095 = ORIENTED_EDGE ( 'NONE', *, *, #30, .F. ) ; +#2096 = CARTESIAN_POINT ( 'NONE', ( 6.162687859815950900, -6.881629992121500700, 18.74326536836026200 ) ) ; +#2097 = PLANE ( 'NONE', #533 ) ; +#2098 = CARTESIAN_POINT ( 'NONE', ( 16.85663215444309100, 5.615826729133319300, 20.37241298660107700 ) ) ; +#2099 = EDGE_CURVE ( 'NONE', #2998, #2458, #2563, .T. ) ; +#2100 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -4.688437913382179200, 17.08773323077997800 ) ) ; +#2101 = ORIENTED_EDGE ( 'NONE', *, *, #226, .F. ) ; +#2102 = AXIS2_PLACEMENT_3D ( 'NONE', #3770, #3527, #1537 ) ; +#2103 = DIRECTION ( 'NONE', ( 1.290386776969941900E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2104 = CARTESIAN_POINT ( 'NONE', ( 22.20807954259388600, 0.4426163075520599400, 18.42366629864547900 ) ) ; +#2105 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2107 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 27.50000000000000400 ) ) ; +#2106 = LINE ( 'NONE', #1569, #3709 ) ; +#2108 = AXIS2_PLACEMENT_3D ( 'NONE', #3403, #3393, #3373 ) ; +#2109 = CARTESIAN_POINT ( 'NONE', ( 19.66931550797583100, 0.5954397947698680800, 20.26155762220563600 ) ) ; +#2110 = CARTESIAN_POINT ( 'NONE', ( 10.68267058978146300, 8.460904434018118500, 18.85664821965721700 ) ) ; +#2111 = FACE_OUTER_BOUND ( 'NONE', #2679, .T. ) ; +#2112 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.688437913382173000, 17.08773323077997500 ) ) ; +#2113 = FACE_OUTER_BOUND ( 'NONE', #123, .T. ) ; +#2114 = DIRECTION ( 'NONE', ( 1.000000000000000000, -3.457580948128860000E-017, 1.290386776969941900E-016 ) ) ; +#2115 = CARTESIAN_POINT ( 'NONE', ( 21.82735887932075900, -5.814505664803253800, 17.98964982364994500 ) ) ; +#2116 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2117 = VECTOR ( 'NONE', #1204, 1000.000000000000000 ) ; +#2118 = CARTESIAN_POINT ( 'NONE', ( 21.56506666666666700, -4.913000608485472900, 18.24465176069331900 ) ) ; +#2119 = PLANE ( 'NONE', #3368 ) ; +#2120 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000500, -88.81885793164890700, -72.39384004447242700 ) ) ; +#2121 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2674, #275, #2098, #2977, #1108, #1144, #1472, #2323, #1123, #2408 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001278990014806124500, 0.002557980029612248900, 0.003836970044418373400, 0.005115960059224497800 ), + .UNSPECIFIED. ) ; +#2122 = DIRECTION ( 'NONE', ( 1.000000000000000000, -3.457580948128860000E-017, 1.290386776969941900E-016 ) ) ; +#2123 = CARTESIAN_POINT ( 'NONE', ( 18.66018460489232200, 24.14057802016415300, -60.35495406910380500 ) ) ; +#2124 = AXIS2_PLACEMENT_3D ( 'NONE', #3671, #3639, #3631 ) ; +#2125 = CARTESIAN_POINT ( 'NONE', ( 21.94026985150723500, 3.438076531602678000, 18.34629285462786900 ) ) ; +#2126 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2127 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.999423642752413200, 12.59359090277150600 ) ) ; +#2128 = EDGE_CURVE ( 'NONE', #1362, #2737, #393, .T. ) ; +#2129 = DIRECTION ( 'NONE', ( -0.7071067811865473500, -0.7071067811865476800, 0.0000000000000000000 ) ) ; +#2130 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999994000, 12.65496680558645800, -55.06972082365662400 ) ) ; +#2131 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.014749828072290900, 13.61697764103997500 ) ) ; +#2132 = ORIENTED_EDGE ( 'NONE', *, *, #388, .T. ) ; +#2133 = PLANE ( 'NONE', #2938 ) ; +#2134 = CARTESIAN_POINT ( 'NONE', ( 17.07528977095325500, 13.06581165629426900, -18.90820331608211900 ) ) ; +#2135 = CARTESIAN_POINT ( 'NONE', ( 7.970087270609449000, -9.999999999999703300, 17.45812994664382600 ) ) ; +#2136 = CARTESIAN_POINT ( 'NONE', ( 19.94920000000000100, -88.81885793164890700, -72.39384004447242700 ) ) ; +#2137 = CARTESIAN_POINT ( 'NONE', ( 13.82318305185037000, 23.57156752814097400, -64.11952689591343800 ) ) ; +#2138 = ORIENTED_EDGE ( 'NONE', *, *, #2054, .F. ) ; +#2139 = ADVANCED_FACE ( 'NONE', ( #1811 ), #1398, .T. ) ; +#2140 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000007400, 2.371521134422848800, -31.35343597986623700 ) ) ; +#2141 = CARTESIAN_POINT ( 'NONE', ( 10.73579460390099900, 10.00000000000000400, 15.18428817202208600 ) ) ; +#2142 = EDGE_LOOP ( 'NONE', ( #207, #2240, #2485, #2781 ) ) ; +#2143 = ORIENTED_EDGE ( 'NONE', *, *, #579, .F. ) ; +#2144 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -5.008381691144627700, 13.42410956663135800 ) ) ; +#2145 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2146 = VERTEX_POINT ( 'NONE', #3422 ) ; +#2147 = ORIENTED_EDGE ( 'NONE', *, *, #857, .T. ) ; +#2148 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.014749828072294400, 13.61697764103997300 ) ) ; +#2149 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -5.997907696802578000, 13.20722971111320200 ) ) ; +#2150 = CARTESIAN_POINT ( 'NONE', ( 9.488589875337581200, 12.90402930031772000, -18.25996234381573700 ) ) ; +#2151 = EDGE_CURVE ( 'NONE', #1913, #2155, #2748, .T. ) ; +#2152 = ORIENTED_EDGE ( 'NONE', *, *, #339, .F. ) ; +#2153 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2154 = CARTESIAN_POINT ( 'NONE', ( 8.909669035453990900, 23.99207333396102000, -63.04584181337058600 ) ) ; +#2155 = VERTEX_POINT ( 'NONE', #3126 ) ; +#2156 = ORIENTED_EDGE ( 'NONE', *, *, #991, .T. ) ; +#2157 = EDGE_CURVE ( 'NONE', #2155, #1647, #1924, .T. ) ; +#2158 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -7.987988261658157000, 12.83796693380419300 ) ) ; +#2159 = CARTESIAN_POINT ( 'NONE', ( 10.07671038614971000, 7.874531352087080500, 19.30901073777037500 ) ) ; +#2160 = LINE ( 'NONE', #890, #2263 ) ; +#2161 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -88.81885793164890700, -72.39384004447242700 ) ) ; +#2162 = EDGE_CURVE ( 'NONE', #126, #652, #1112, .T. ) ; +#2163 = DIRECTION ( 'NONE', ( -4.007720081139350800E-016, 0.2588190451025143600, -0.9659258262890700900 ) ) ; +#2164 = CARTESIAN_POINT ( 'NONE', ( 5.834821722338488400, 12.18129507813263500, -62.96121213358091500 ) ) ; +#2165 = CARTESIAN_POINT ( 'NONE', ( 5.834821722338488400, 12.18129507813263500, -62.96121213358091500 ) ) ; +#2166 = CIRCLE ( 'NONE', #3152, 5.000000000000000000 ) ; +#2167 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000004700, -9.999999999999998200, 14.27124344467705300 ) ) ; +#2168 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 9.021910162364875400, 12.68010692637573600 ) ) ; +#2169 = FACE_OUTER_BOUND ( 'NONE', #3652, .T. ) ; +#2170 = CARTESIAN_POINT ( 'NONE', ( 6.030980904782793100, 12.25695974379088000, -63.24359651015519300 ) ) ; +#2171 = DIRECTION ( 'NONE', ( -0.7499999999999981100, 0.1711927069771183000, -0.6388998803238653500 ) ) ; +#2172 = CARTESIAN_POINT ( 'NONE', ( 21.77451300977335800, -4.109413512850376400, 18.32519881038508900 ) ) ; +#2173 = CARTESIAN_POINT ( 'NONE', ( 22.19283297642749300, 0.8859737611485549700, 18.42067712975576300 ) ) ; +#2174 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2774, #3562, #3343 ), + ( #3546, #3448, #3489 ), + ( #3408, #3761, #3464 ), + ( #3439, #345, #3362 ), + ( #3735, #3177, #3237 ), + ( #3583, #3406, #3396 ), + ( #482, #3391, #3140 ), + ( #1267, #3280, #3258 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 0.03756001926301492200, 0.03978849970606211700, 0.04201698014910930400, 0.04647394103520367800 ), + ( 0.0000000000000000000, 0.4629270918784370600 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9647617733530223800, 0.9621490062753219600), + ( 1.000000000000000000, 0.9680440911170060700, 0.9656746941690854700), + ( 1.000000000000000000, 0.9714210604429374100, 0.9693020516421160200), + ( 1.000000000000000000, 0.9778472595935630000, 0.9762047265741056200), + ( 1.000000000000000000, 0.9809018566000932100, 0.9794858091689788700), + ( 1.000000000000000000, 0.9892368525626189500, 0.9884388102105292600), + ( 1.000000000000000000, 0.9936706241870386600, 0.9932013274510771400), + ( 1.000000000000000000, 0.9964416651330557700, 0.9961778294898797600) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2175 = CARTESIAN_POINT ( 'NONE', ( 6.238215395107672200, 12.35125022597102200, -63.51389493086355700 ) ) ; +#2176 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890698700, 0.2588190451025151900 ) ) ; +#2177 = DIRECTION ( 'NONE', ( 0.8802913740347566600, -0.4744334482306238900, 0.0000000000000000000 ) ) ; +#2178 = CARTESIAN_POINT ( 'NONE', ( 22.34913074750227600, 7.140663048965961000, 17.43757889604129500 ) ) ; +#2179 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #3400, #1450, ( #587 ) ) ; +#2180 = CARTESIAN_POINT ( 'NONE', ( 18.67379999999996400, 3.354751084655893700, 20.42893218813456700 ) ) ; +#2181 = EDGE_CURVE ( 'NONE', #1559, #1892, #3444, .T. ) ; +#2182 = CARTESIAN_POINT ( 'NONE', ( 19.06357827766149900, 21.59660753133214700, -60.43838676525948700 ) ) ; +#2183 = CARTESIAN_POINT ( 'NONE', ( 21.92799044475479100, -3.297484521092737700, 18.36910484970999800 ) ) ; +#2184 = CARTESIAN_POINT ( 'NONE', ( 6.668609081717141500, 12.56607464330527300, -64.02044768774696600 ) ) ; +#2185 = ORIENTED_EDGE ( 'NONE', *, *, #1420, .T. ) ; +#2186 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999995800, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#2187 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2188 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.999423642752454100, 12.59359090277176900 ) ) ; +#2189 = CARTESIAN_POINT ( 'NONE', ( 21.31656462048700700, 0.3848053017880909100, -27.19596463223457100 ) ) ; +#2190 = ORIENTED_EDGE ( 'NONE', *, *, #659, .F. ) ; +#2191 = CARTESIAN_POINT ( 'NONE', ( 2.449200000000005600, 10.00000000000000700, 27.50000000000000400 ) ) ; +#2192 = VERTEX_POINT ( 'NONE', #1503 ) ; +#2193 = EDGE_CURVE ( 'NONE', #1964, #1594, #352, .T. ) ; +#2194 = EDGE_LOOP ( 'NONE', ( #1953, #1968, #1969, #1994 ) ) ; +#2195 = ORIENTED_EDGE ( 'NONE', *, *, #1059, .T. ) ; +#2196 = CARTESIAN_POINT ( 'NONE', ( 6.892139043169487800, 12.68668219388658800, -64.25750115698923500 ) ) ; +#2197 = CARTESIAN_POINT ( 'NONE', ( 19.94920000000000100, -11.59115779176003800, -61.56645032909982300 ) ) ; +#2198 = ORIENTED_EDGE ( 'NONE', *, *, #1723, .T. ) ; +#2199 = CARTESIAN_POINT ( 'NONE', ( 19.96883948442891900, -4.052713221188400700, 18.95778351778779600 ) ) ; +#2200 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2201 = EDGE_LOOP ( 'NONE', ( #1452, #1505, #1593, #1598 ) ) ; +#2202 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -9.999999999999998200, 14.27124344467705300 ) ) ; +#2203 = CARTESIAN_POINT ( 'NONE', ( 7.751561400997550400, 5.302361400997492400, 20.42893218813456700 ) ) ; +#2204 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000100, 0.9469871269365777200, -25.37306697812080000 ) ) ; +#2205 = AXIS2_PLACEMENT_3D ( 'NONE', #265, #231, #273 ) ; +#2206 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2207 = ORIENTED_EDGE ( 'NONE', *, *, #1955, .T. ) ; +#2208 = CARTESIAN_POINT ( 'NONE', ( 8.041767845556130100, 5.615826729132476400, 20.37241298660123300 ) ) ; +#2209 = EDGE_CURVE ( 'NONE', #1298, #2823, #442, .T. ) ; +#2210 = AXIS2_PLACEMENT_3D ( 'NONE', #342, #299, #711 ) ; +#2211 = LOCAL_TIME ( 17, 46, 53.00000000000000000, #1385 ) ; +#2212 = CARTESIAN_POINT ( 'NONE', ( 18.05069265913340000, -9.999999999999996400, 14.04390058874877100 ) ) ; +#2213 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999994000, 19.65546469306329100, -53.19394306809147100 ) ) ; +#2214 = CARTESIAN_POINT ( 'NONE', ( 19.96883948442891200, 4.052713221188402500, 18.95778351778779600 ) ) ; +#2215 = CIRCLE ( 'NONE', #2504, 10.00000000000000000 ) ; +#2216 = CARTESIAN_POINT ( 'NONE', ( 14.21572941020877500, -8.460904434014363300, 18.85664821966289000 ) ) ; +#2217 = EDGE_CURVE ( 'NONE', #1106, #2146, #3532, .T. ) ; +#2218 = LINE ( 'NONE', #2757, #803 ) ; +#2219 = DIRECTION ( 'NONE', ( -0.6484729204542144500, 0.0000000000000000000, 0.7612377233411268300 ) ) ; +#2220 = CARTESIAN_POINT ( 'NONE', ( 18.65367257182978000, -10.00000000000000000, 13.82282299581315500 ) ) ; +#2221 = CARTESIAN_POINT ( 'NONE', ( 8.592979838997051100, 6.225936000115805100, 20.18752835263138200 ) ) ; +#2222 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 20.42893218813456700 ) ) ; +#2223 = FACE_OUTER_BOUND ( 'NONE', #1564, .T. ) ; +#2224 = CARTESIAN_POINT ( 'NONE', ( 7.358319312702746200, 12.94713918839683200, -64.70067013313897100 ) ) ; +#2225 = CARTESIAN_POINT ( 'NONE', ( 19.86919033691037100, -9.999999999999996400, 13.42093196348150400 ) ) ; +#2226 = CARTESIAN_POINT ( 'NONE', ( 7.600946490362717100, 13.08704321015295600, -64.90677871965164100 ) ) ; +#2227 = CARTESIAN_POINT ( 'NONE', ( 13.92015522072604000, -9.999999999999998200, 17.41044999498384300 ) ) ; +#2228 = DIRECTION ( 'NONE', ( -0.7499999999999973400, 0.1711927069771170000, -0.6388998803238664600 ) ) ; +#2229 = CARTESIAN_POINT ( 'NONE', ( 20.48163778573892900, -9.999999999999994700, 13.23973768650285800 ) ) ; +#2230 = CARTESIAN_POINT ( 'NONE', ( 8.108983647218247300, 13.37896340457608700, -65.28829241343764500 ) ) ; +#2231 = DIRECTION ( 'NONE', ( -0.8802913740347565500, 0.4744334482306240600, 0.0000000000000000000 ) ) ; +#2232 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2233 = ORIENTED_EDGE ( 'NONE', *, *, #916, .T. ) ; +#2234 = CARTESIAN_POINT ( 'NONE', ( 8.374518742478503700, 13.53107372438654500, -65.46351797645702700 ) ) ; +#2235 = EDGE_LOOP ( 'NONE', ( #417, #3505, #2720, #1895 ) ) ; +#2236 = EDGE_CURVE ( 'NONE', #1686, #1594, #1203, .T. ) ; +#2237 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -9.999999999999998200, 12.51759777210976000 ) ) ; +#2238 = ADVANCED_FACE ( 'NONE', ( #2842 ), #732, .T. ) ; +#2239 = CARTESIAN_POINT ( 'NONE', ( 13.49313651056204400, -9.999999999999998200, 15.32111431373017200 ) ) ; +#2240 = ORIENTED_EDGE ( 'NONE', *, *, #245, .F. ) ; +#2241 = ORIENTED_EDGE ( 'NONE', *, *, #221, .T. ) ; +#2242 = CARTESIAN_POINT ( 'NONE', ( 5.834821722338463500, 13.40741737109299300, -20.21665475151220900 ) ) ; +#2243 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025146300, 0.9659258262890698700 ) ) ; +#2244 = CARTESIAN_POINT ( 'NONE', ( 1.232595164407831400E-031, -10.00000000000000200, 7.499999999999999100 ) ) ; +#2245 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 18.09635858759372700, -61.37627564304205000 ) ) ; +#2246 = ORIENTED_EDGE ( 'NONE', *, *, #423, .T. ) ; +#2247 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3033, #1201, #2427, #329 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001081607159478684000 ), + .UNSPECIFIED. ) ; +#2248 = ORIENTED_EDGE ( 'NONE', *, *, #1109, .T. ) ; +#2249 = CARTESIAN_POINT ( 'NONE', ( 8.923591906362032600, 13.83277906371842600, -65.77732840549325000 ) ) ; +#2250 = ORIENTED_EDGE ( 'NONE', *, *, #1133, .T. ) ; +#2251 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #984, #1005, #930, #926, #914, #905, #897, #883 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001913208264031162400, 0.003826416528062324800, 0.007652833056124646100 ), + .UNSPECIFIED. ) ; +#2252 = ADVANCED_FACE ( 'NONE', ( #2111 ), #359, .T. ) ; +#2253 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890700900, 0.2588190451025145200 ) ) ; +#2254 = ORIENTED_EDGE ( 'NONE', *, *, #1257, .T. ) ; +#2255 = DIRECTION ( 'NONE', ( -0.2002407675989414700, 0.0000000000000000000, 0.9797467198165996600 ) ) ; +#2256 = EDGE_LOOP ( 'NONE', ( #3070, #3191, #3276, #3270, #3831 ) ) ; +#2257 = CARTESIAN_POINT ( 'NONE', ( 9.209575781549043300, 13.98376155134972800, -65.91737163022745000 ) ) ; +#2258 = CARTESIAN_POINT ( 'NONE', ( 13.64257923156073300, -8.508624297246850400, 18.92707615781747100 ) ) ; +#2259 = CARTESIAN_POINT ( 'NONE', ( 19.06357827766150600, 14.59610964385531100, -62.31416452082462600 ) ) ; +#2260 = CARTESIAN_POINT ( 'NONE', ( 12.44919999999999800, 19.65546469306329100, -53.19394306809147800 ) ) ; +#2261 = VERTEX_POINT ( 'NONE', #2167 ) ; +#2262 = CARTESIAN_POINT ( 'NONE', ( 3.333333333333329500, -4.913000608485467600, 18.24465176069333000 ) ) ; +#2263 = VECTOR ( 'NONE', #823, 1000.000000000000000 ) ; +#2264 = AXIS2_PLACEMENT_3D ( 'NONE', #945, #856, #956 ) ; +#2265 = FACE_OUTER_BOUND ( 'NONE', #1000, .T. ) ; +#2266 = CARTESIAN_POINT ( 'NONE', ( 9.801443761255727700, 14.26866787712021200, -66.15997619515741200 ) ) ; +#2267 = EDGE_CURVE ( 'NONE', #3186, #3279, #529, .T. ) ; +#2268 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000010900, -9.999999999999998200, 14.27124344467705400 ) ) ; +#2269 = EDGE_CURVE ( 'NONE', #2950, #906, #3711, .T. ) ; +#2271 = CARTESIAN_POINT ( 'NONE', ( 22.33816547233939100, -9.999999999999998200, 12.77697577569402100 ) ) ; +#2270 = CIRCLE ( 'NONE', #2108, 5.000000000000000900 ) ; +#2272 = CARTESIAN_POINT ( 'NONE', ( 16.14996808565893700, 10.00000000000000200, 14.69451307130790100 ) ) ; +#2273 = CARTESIAN_POINT ( 'NONE', ( 10.10643009010132500, 14.40230516773831400, -66.26242804692564900 ) ) ; +#2274 = CARTESIAN_POINT ( 'NONE', ( 13.43935315951609300, -10.00000000000000000, 17.46893999350747300 ) ) ; +#2275 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#2276 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#2277 = AXIS2_PLACEMENT_3D ( 'NONE', #1068, #1032, #1076 ) ; +#2278 = CARTESIAN_POINT ( 'NONE', ( 23.60240242157167900, -9.999999999999998200, 12.57590347057598700 ) ) ; +#2279 = ADVANCED_FACE ( 'NONE', ( #3023 ), #962, .F. ) ; +#2280 = CARTESIAN_POINT ( 'NONE', ( 3.581677518285939100, 0.3850187675795795900, -27.19639972292385000 ) ) ; +#2281 = CARTESIAN_POINT ( 'NONE', ( 10.58245396653631900, 14.57667203645105000, -66.38795555873758800 ) ) ; +#2282 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890698700, 0.2588190451025151900 ) ) ; +#2283 = CARTESIAN_POINT ( 'NONE', ( 16.92831272939095700, 10.00000000000000000, 17.45812994664322600 ) ) ; +#2284 = CARTESIAN_POINT ( 'NONE', ( 13.14835912534038300, -9.999999999999998200, 15.39157996722357600 ) ) ; +#2285 = EDGE_CURVE ( 'NONE', #3783, #2992, #1301, .T. ) ; +#2286 = DIRECTION ( 'NONE', ( -1.423840205071660400E-015, 0.2588190451025151300, -0.9659258262890699800 ) ) ; +#2287 = CARTESIAN_POINT ( 'NONE', ( 2.763166022047882600, -1.658644120440417900, 18.42361056702968700 ) ) ; +#2288 = ORIENTED_EDGE ( 'NONE', *, *, #1335, .T. ) ; +#2289 = EDGE_CURVE ( 'NONE', #1086, #3734, #621, .T. ) ; +#2290 = EDGE_CURVE ( 'NONE', #1892, #2689, #2215, .T. ) ; +#2291 = ORIENTED_EDGE ( 'NONE', *, *, #606, .T. ) ; +#2292 = VERTEX_POINT ( 'NONE', #3732 ) ; +#2293 = CARTESIAN_POINT ( 'NONE', ( 20.63177569105656400, 1.801493509181244700, 19.12911455868243800 ) ) ; +#2294 = CARTESIAN_POINT ( 'NONE', ( 7.581748871483748400, -7.522862197977683100, 18.85651978935561600 ) ) ; +#2295 = ADVANCED_FACE ( 'NONE', ( #3793 ), #3119, .T. ) ; +#2296 = EDGE_CURVE ( 'NONE', #2775, #1456, #716, .T. ) ; +#2297 = ORIENTED_EDGE ( 'NONE', *, *, #2290, .T. ) ; +#2298 = CARTESIAN_POINT ( 'NONE', ( 22.44919999999999800, 10.18853926298076300, -45.86488792146470700 ) ) ; +#2299 = ORIENTED_EDGE ( 'NONE', *, *, #1444, .T. ) ; +#2300 = CARTESIAN_POINT ( 'NONE', ( 19.20227543358472400, 7.232284611401859700, 18.44786122541954800 ) ) ; +#2301 = AXIS2_PLACEMENT_3D ( 'NONE', #1128, #1088, #1103 ) ; +#2302 = CARTESIAN_POINT ( 'NONE', ( 18.95364158111136300, 2.835516767501044600, 20.42893218571340000 ) ) ; +#2303 = CARTESIAN_POINT ( 'NONE', ( 13.04024515488404900, -8.535673796040603300, 18.96466392848461900 ) ) ; +#2304 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890698700, 0.2588190451025151900 ) ) ; +#2305 = EDGE_LOOP ( 'NONE', ( #2739, #2777, #2782, #2787, #2791 ) ) ; +#2306 = AXIS2_PLACEMENT_3D ( 'NONE', #3620, #3627, #3740 ) ; +#2307 = ORIENTED_EDGE ( 'NONE', *, *, #579, .T. ) ; +#2308 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2557, #2562, #2537, #2517, #2512, #2495, #2491, #2486, #2462, #2444, #2437, #2423, #2410, #2401, #2395, #2377, #2365, #2357, #2344, #2334, #2324, #2313, #2281, #2273, #2266, #2257, #2249, #2234, #2230, #2226, #2224, #2196, #2184, #2175, #2170, #2165 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002073778315922784100, 0.003110667473884176400, 0.004147556631845568200, 0.005184445789806960500, 0.006221334947768348400, 0.007258224105729735500, 0.008295113263691122500, 0.008813557842671815600, 0.009332002421652508700, 0.009850447000633205300, 0.01036889157961389800, 0.01140578073757528100, 0.01244266989553666400, 0.01347955905349804700, 0.01451644821145943300, 0.01555333736942081600, 0.01659022652738220000 ), + .UNSPECIFIED. ) ; +#2309 = CARTESIAN_POINT ( 'NONE', ( 22.09243961545692200, 2.191264003408047900, 18.39593668523333000 ) ) ; +#2310 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999999400, 1.106980960592370400, -25.38709466269165600 ) ) ; +#2311 = ORIENTED_EDGE ( 'NONE', *, *, #2209, .T. ) ; +#2312 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999994000, 19.65546469306328700, -53.19394306809148500 ) ) ; +#2313 = CARTESIAN_POINT ( 'NONE', ( 10.74424175727981500, 14.63040339311452900, -66.42508688618548300 ) ) ; +#2314 = CARTESIAN_POINT ( 'NONE', ( 12.93883383681894000, -9.999999999999998200, 17.50016388976509400 ) ) ; +#2315 = VECTOR ( 'NONE', #441, 1000.000000000000000 ) ; +#2316 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000031400, -4.999999999999971600, 20.42893218813457100 ) ) ; +#2317 = CARTESIAN_POINT ( 'NONE', ( 4.949199999999994000, -11.59115779176003800, -61.56645032909982300 ) ) ; +#2318 = ADVANCED_FACE ( 'NONE', ( #43 ), #72, .T. ) ; +#2319 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2320 = VECTOR ( 'NONE', #2910, 1000.000000000000000 ) ; +#2321 = AXIS2_PLACEMENT_3D ( 'NONE', #1327, #1605, #1660 ) ; +#2322 = VECTOR ( 'NONE', #1210, 999.9999999999998900 ) ; +#2323 = CARTESIAN_POINT ( 'NONE', ( 14.74341813383035800, 7.936596969542685900, 19.24518683206883200 ) ) ; +#2324 = CARTESIAN_POINT ( 'NONE', ( 11.07521694814962400, 14.72631418048775500, -66.48960538726569800 ) ) ; +#2325 = EDGE_CURVE ( 'NONE', #2866, #3734, #2409, .T. ) ; +#2326 = VECTOR ( 'NONE', #2548, 1000.000000000000000 ) ; +#2327 = CARTESIAN_POINT ( 'NONE', ( 16.52388125752149900, 24.09363242135119200, -62.63328890359910900 ) ) ; +#2328 = CARTESIAN_POINT ( 'NONE', ( 12.79542630869189800, -9.999999999999998200, 15.42913002220679400 ) ) ; +#2329 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2330 = DIRECTION ( 'NONE', ( -0.2002407675988571400, 0.0000000000000000000, 0.9797467198166168700 ) ) ; +#2331 = CARTESIAN_POINT ( 'NONE', ( 5.664542585213428800, 6.784657414786578600, 18.59364585706215700 ) ) ; +#2332 = CARTESIAN_POINT ( 'NONE', ( 7.062778719351230800, 1.964638427592655200, -25.63740436252659200 ) ) ; +#2333 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2451, #2420, #2415 ), + ( #2403, #2383, #2371 ), + ( #2360, #2351, #2339 ), + ( #2328, #2314, #2303 ), + ( #2284, #2274, #2258 ), + ( #2239, #2227, #2216 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( 6.153497850158729000E-015, 0.001045545094503902000, 0.002091090189001650600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9198317473328752000, 1.000000000000000000), + ( 1.000000000000000000, 0.9224418726314426200, 1.000000000000000000), + ( 1.000000000000000000, 0.9238718997686856700, 1.000000000000000000), + ( 1.000000000000000000, 0.9238871032909858900, 1.000000000000000000), + ( 1.000000000000000000, 0.9224510129883627400, 1.000000000000000000), + ( 1.000000000000000000, 0.9198317473328675400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2334 = CARTESIAN_POINT ( 'NONE', ( 11.24508192544428200, 14.76856695286148000, -66.51703986100305600 ) ) ; +#2335 = ORIENTED_EDGE ( 'NONE', *, *, #1181, .T. ) ; +#2336 = DIRECTION ( 'NONE', ( -0.9797467198166171000, 6.154400848455955900E-013, -0.2002407675988571400 ) ) ; +#2337 = CARTESIAN_POINT ( 'NONE', ( 20.27369416262618500, 6.282183226029410200, 18.38011863062086300 ) ) ; +#2338 = CARTESIAN_POINT ( 'NONE', ( 19.48840653564240500, 1.471902724614220400, 20.31453066123998900 ) ) ; +#2339 = CARTESIAN_POINT ( 'NONE', ( 11.84844031592008000, -8.535392870899748600, 18.96426664048087900 ) ) ; +#2340 = ORIENTED_EDGE ( 'NONE', *, *, #1775, .T. ) ; +#2341 = CARTESIAN_POINT ( 'NONE', ( 11.40526348943493900, 5.000000000000002700, 15.32111431372955000 ) ) ; +#2342 = EDGE_LOOP ( 'NONE', ( #2195, #2198 ) ) ; +#2343 = EDGE_CURVE ( 'NONE', #1096, #2091, #3236, .T. ) ; +#2344 = CARTESIAN_POINT ( 'NONE', ( 11.58689177189954800, 14.83713814748495400, -66.56078488034113100 ) ) ; +#2345 = ORIENTED_EDGE ( 'NONE', *, *, #659, .T. ) ; +#2346 = VERTEX_POINT ( 'NONE', #3019 ) ; +#2347 = EDGE_CURVE ( 'NONE', #1842, #2628, #797, .T. ) ; +#2348 = VERTEX_POINT ( 'NONE', #3809 ) ; +#2349 = EDGE_CURVE ( 'NONE', #509, #3502, #2515, .T. ) ; +#2350 = CARTESIAN_POINT ( 'NONE', ( 19.20822527994884500, 2.308342240456592500, 20.38178112316888900 ) ) ; +#2351 = CARTESIAN_POINT ( 'NONE', ( 11.95151025959033900, -9.999999999999998200, 17.49983476616327500 ) ) ; +#2352 = EDGE_LOOP ( 'NONE', ( #2914, #2918, #2959 ) ) ; +#2353 = ORIENTED_EDGE ( 'NONE', *, *, #2285, .T. ) ; +#2354 = CARTESIAN_POINT ( 'NONE', ( 17.31665112851860400, -7.522862197977311800, 18.85651978935521100 ) ) ; +#2355 = ORIENTED_EDGE ( 'NONE', *, *, #158, .T. ) ; +#2356 = CYLINDRICAL_SURFACE ( 'NONE', #2811, 5.000000000000000000 ) ; +#2357 = CARTESIAN_POINT ( 'NONE', ( 11.75942216494576600, 14.86366791372614100, -66.57725131210982300 ) ) ; +#2358 = AXIS2_PLACEMENT_3D ( 'NONE', #2130, #2163, #2304 ) ; +#2359 = CARTESIAN_POINT ( 'NONE', ( 21.80493453549449600, 4.222721478952998100, 18.28948639725364300 ) ) ; +#2360 = CARTESIAN_POINT ( 'NONE', ( 12.09728305147557100, -9.999999999999998200, 15.42873273489327700 ) ) ; +#2361 = FACE_OUTER_BOUND ( 'NONE', #20, .T. ) ; +#2362 = CARTESIAN_POINT ( 'NONE', ( 13.92015522073535600, -9.999999999999996400, 17.41044999498254200 ) ) ; +#2363 = AXIS2_PLACEMENT_3D ( 'NONE', #1665, #833, #53 ) ; +#2364 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2365 = CARTESIAN_POINT ( 'NONE', ( 12.10803612431454800, 14.89924800990024200, -66.59919827861170900 ) ) ; +#2366 = EDGE_CURVE ( 'NONE', #3647, #2594, #2558, .T. ) ; +#2367 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3069, #363, #73 ), + ( #1805, #3630, #1494 ), + ( #3332, #1207, #3039 ), + ( #909, #2743, #630 ), + ( #2432, #338, #2115 ), + ( #59, #1790, #3617 ), + ( #1483, #3315, #1192 ), + ( #3025, #896, #2729 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001924698808057212400, 0.003849397616114424700, 0.007698795232228849500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8164965809277262600, 1.000000000000000000), + ( 1.000000000000000000, 0.8041240654838626200, 1.000000000000000000), + ( 1.000000000000000000, 0.7926702635783996500, 1.000000000000000000), + ( 1.000000000000000000, 0.7719025772521622700, 1.000000000000000000), + ( 1.000000000000000000, 0.7625754468079157800, 1.000000000000000000), + ( 1.000000000000000000, 0.7373423233571270200, 1.000000000000000000), + ( 1.000000000000000000, 0.7241342231880562000, 1.000000000000000000), + ( 1.000000000000000000, 0.7130631886949770900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2368 = AXIS2_PLACEMENT_3D ( 'NONE', #2276, #2200, #2187 ) ; +#2369 = CARTESIAN_POINT ( 'NONE', ( 3.568976306003019100, 5.960521729848161400, 18.11286642393776700 ) ) ; +#2370 = CARTESIAN_POINT ( 'NONE', ( 20.39666926850311400, 2.818438955210293500, 19.09700861388506300 ) ) ; +#2371 = CARTESIAN_POINT ( 'NONE', ( 11.25643491507813800, -8.508675430887699100, 18.92715162289939800 ) ) ; +#2372 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -8.074441630149902200, -13.39944000404294900 ) ) ; +#2373 = EDGE_CURVE ( 'NONE', #2088, #970, #1667, .T. ) ; +#2374 = CARTESIAN_POINT ( 'NONE', ( 3.464575402695091900, 6.081356860734156400, 18.05630710620731300 ) ) ; +#2375 = DESIGN_CONTEXT ( 'detailed design', #1437, 'design' ) ; +#2376 = ORIENTED_EDGE ( 'NONE', *, *, #1102, .F. ) ; +#2377 = CARTESIAN_POINT ( 'NONE', ( 12.28517538674548400, 14.90823458395350800, -66.60464685738709500 ) ) ; +#2378 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, 12.93374564363917600, -28.10814606143646100 ) ) ; +#2379 = EDGE_LOOP ( 'NONE', ( #1019, #1404, #1045, #1410 ) ) ; +#2380 = CARTESIAN_POINT ( 'NONE', ( 3.359463895330882600, 6.203161991766661400, 17.99540134615853800 ) ) ; +#2381 = ORIENTED_EDGE ( 'NONE', *, *, #1751, .T. ) ; +#2382 = ADVANCED_FACE ( 'NONE', ( #3205 ), #1815, .T. ) ; +#2383 = CARTESIAN_POINT ( 'NONE', ( 11.45954492136429100, -10.00000000000030400, 17.46900058407933500 ) ) ; +#2384 = AXIS2_PLACEMENT_3D ( 'NONE', #1862, #420, #2498 ) ; +#2385 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#2386 = ORIENTED_EDGE ( 'NONE', *, *, #1361, .F. ) ; +#2387 = ORIENTED_EDGE ( 'NONE', *, *, #2128, .F. ) ; +#2388 = CARTESIAN_POINT ( 'NONE', ( 3.153123964129728000, 6.442232767083473800, 17.86805997513225800 ) ) ; +#2389 = CARTESIAN_POINT ( 'NONE', ( 18.20864665766465200, 9.999999999999710500, 17.53233944198309000 ) ) ; +#2390 = CARTESIAN_POINT ( 'NONE', ( 6.707737363991403100, 2.183569119956351800, -25.98539268891414300 ) ) ; +#2391 = EDGE_CURVE ( 'NONE', #1658, #1086, #881, .T. ) ; +#2392 = VERTEX_POINT ( 'NONE', #2875 ) ; +#2393 = ORIENTED_EDGE ( 'NONE', *, *, #93, .F. ) ; +#2394 = EDGE_CURVE ( 'NONE', #2455, #1552, #146, .T. ) ; +#2395 = CARTESIAN_POINT ( 'NONE', ( 12.81142208155899600, 14.90703988859854500, -66.60391823856691900 ) ) ; +#2396 = CARTESIAN_POINT ( 'NONE', ( 19.85170512318958200, 6.421387181159032800, 18.49541510015829700 ) ) ; +#2397 = ORIENTED_EDGE ( 'NONE', *, *, #2236, .F. ) ; +#2398 = EDGE_CURVE ( 'NONE', #1662, #3502, #799, .T. ) ; +#2399 = CARTESIAN_POINT ( 'NONE', ( 3.051006016240503700, 6.560538726412121800, 17.80114242197734600 ) ) ; +#2400 = AXIS2_PLACEMENT_3D ( 'NONE', #2700, #2637, #2604 ) ; +#2401 = CARTESIAN_POINT ( 'NONE', ( 13.15674227075124500, 14.86909375811024600, -66.58122624507952000 ) ) ; +#2402 = ORIENTED_EDGE ( 'NONE', *, *, #919, .F. ) ; +#2403 = CARTESIAN_POINT ( 'NONE', ( 11.75033599134379300, -9.999999999999998200, 15.39164028165648000 ) ) ; +#2404 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#2405 = CARTESIAN_POINT ( 'NONE', ( 2.747620257776468100, 6.911642469694987400, 17.59070563490342900 ) ) ; +#2406 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000500, 10.00000000000000200, 14.27124344467704600 ) ) ; +#2407 = CIRCLE ( 'NONE', #3008, 4.999999999999997300 ) ; +#2408 = CARTESIAN_POINT ( 'NONE', ( 14.21572941021420700, 8.460904434022321400, 18.85664821965398700 ) ) ; +#2409 = CIRCLE ( 'NONE', #2363, 100.0000000000000100 ) ; +#2410 = CARTESIAN_POINT ( 'NONE', ( 13.83771467849751200, 14.73062668621869900, -66.49277814155972500 ) ) ; +#2411 = CARTESIAN_POINT ( 'NONE', ( 17.14652112696673900, 7.586135167415696000, 18.86242405612951600 ) ) ; +#2412 = CARTESIAN_POINT ( 'NONE', ( 10.97824477926726200, -9.999999999999998200, 17.41044999498248600 ) ) ; +#2413 = CARTESIAN_POINT ( 'NONE', ( 3.571317254570980800, 5.957257645293630300, 18.11089526564351700 ) ) ; +#2414 = FACE_OUTER_BOUND ( 'NONE', #330, .T. ) ; +#2415 = CARTESIAN_POINT ( 'NONE', ( 10.68267058979289400, -8.460904434014503700, 18.85664821966309300 ) ) ; +#2416 = PLANE ( 'NONE', #1177 ) ; +#2417 = EDGE_CURVE ( 'NONE', #2790, #2775, #2218, .T. ) ; +#2418 = CARTESIAN_POINT ( 'NONE', ( 2.549281361054652100, 7.140649096059259900, 17.43758861377711300 ) ) ; +#2419 = EDGE_CURVE ( 'NONE', #970, #1641, #1576, .T. ) ; +#2420 = CARTESIAN_POINT ( 'NONE', ( 10.97824477927536400, -9.999999999999998200, 17.41044999498401300 ) ) ; +#2421 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 10.00000000000000000, -7.500000000000000900 ) ) ; +#2422 = CARTESIAN_POINT ( 'NONE', ( 1.965846866013464700, 7.810752519511520800, 16.93736690769646500 ) ) ; +#2423 = CARTESIAN_POINT ( 'NONE', ( 14.17124949544723700, 14.63043598371343600, -66.42687574920154200 ) ) ; +#2424 = EDGE_CURVE ( 'NONE', #2594, #1194, #1124, .T. ) ; +#2425 = CARTESIAN_POINT ( 'NONE', ( 10.68267058978146300, 8.460904434018118500, 18.85664821965721700 ) ) ; +#2426 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #720, #738, #712, #710, #704, #701, #692, #685, #664, #654 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002023148652360848300, 0.004046297304721697400, 0.006069445957082546600, 0.008092594609443394900 ), + .UNSPECIFIED. ) ; +#2427 = CARTESIAN_POINT ( 'NONE', ( 21.41165688879032600, 5.612531535564327700, 18.15900926220602000 ) ) ; +#2428 = CARTESIAN_POINT ( 'NONE', ( 18.67379999999996400, -3.354751084655890600, 20.42893218813456700 ) ) ; +#2429 = CARTESIAN_POINT ( 'NONE', ( 12.44919999998348100, 11.02205614447055000, -20.85581036584213200 ) ) ; +#2430 = VERTEX_POINT ( 'NONE', #2669 ) ; +#2431 = CARTESIAN_POINT ( 'NONE', ( 1.590053579175427300, 8.237011157283671300, 16.54821306897245800 ) ) ; +#2432 = CARTESIAN_POINT ( 'NONE', ( 20.50006385452508100, -9.999999999999998200, 13.23447473476263000 ) ) ; +#2433 = ORIENTED_EDGE ( 'NONE', *, *, #2366, .T. ) ; +#2434 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000006500, 4.402089587893984300, -29.84308411396436600 ) ) ; +#2435 = CARTESIAN_POINT ( 'NONE', ( 14.21572941021854900, -8.460904434018122100, 18.85664821965721300 ) ) ; +#2436 = CARTESIAN_POINT ( 'NONE', ( 1.081733112532756500, 8.804788472915804600, 15.87577581703586400 ) ) ; +#2437 = CARTESIAN_POINT ( 'NONE', ( 14.81130819857716400, 14.39441902002240800, -66.25652403492505000 ) ) ; +#2438 = ORIENTED_EDGE ( 'NONE', *, *, #2398, .F. ) ; +#2439 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000001200, 0.4603260299409555600, -25.28451549527911300 ) ) ; +#2440 = ORIENTED_EDGE ( 'NONE', *, *, #2424, .T. ) ; +#2441 = CARTESIAN_POINT ( 'NONE', ( 17.54008068729725200, 24.21791064200635200, -61.68067602406866000 ) ) ; +#2442 = ORIENTED_EDGE ( 'NONE', *, *, #1866, .F. ) ; +#2443 = ORIENTED_EDGE ( 'NONE', *, *, #1872, .F. ) ; +#2444 = CARTESIAN_POINT ( 'NONE', ( 15.11937767842069700, 14.25846326964809500, -66.15178625118652200 ) ) ; +#2445 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -4.014749828072296200, 13.61697764103997200 ) ) ; +#2446 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999996900, 4.999999999999971600, 20.42893218813457100 ) ) ; +#2447 = CARTESIAN_POINT ( 'NONE', ( 0.9209043299138907100, 8.982926417332620900, 15.63598149426663000 ) ) ; +#2448 = ORIENTED_EDGE ( 'NONE', *, *, #1041, .T. ) ; +#2449 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890705300, 0.2588190451025125800 ) ) ; +#2450 = ADVANCED_FACE ( 'NONE', ( #3125 ), #1389, .F. ) ; +#2451 = CARTESIAN_POINT ( 'NONE', ( 11.40526348943896000, -9.999999999999998200, 15.32111431373037600 ) ) ; +#2452 = EDGE_CURVE ( 'NONE', #2091, #3481, #456, .T. ) ; +#2453 = VERTEX_POINT ( 'NONE', #2619 ) ; +#2454 = CARTESIAN_POINT ( 'NONE', ( 19.94919999999999800, 12.93374564363919000, -28.10814606143646100 ) ) ; +#2455 = VERTEX_POINT ( 'NONE', #2535 ) ; +#2456 = CARTESIAN_POINT ( 'NONE', ( 0.6229275448461988300, 9.310869013799598200, 15.11522995982591600 ) ) ; +#2457 = CARTESIAN_POINT ( 'NONE', ( 15.69097421011500200, 12.92900252365549800, -18.36040606898742300 ) ) ; +#2458 = VERTEX_POINT ( 'NONE', #2446 ) ; +#2460 = CARTESIAN_POINT ( 'NONE', ( 13.31150822810045400, 23.51118090391090800, -64.23658212864384600 ) ) ; +#2459 = APPROVAL_PERSON_ORGANIZATION ( #1071, #1880, #1403 ) ; +#2461 = AXIS2_PLACEMENT_3D ( 'NONE', #2510, #2813, #2329 ) ; +#2462 = CARTESIAN_POINT ( 'NONE', ( 15.70710027103463300, 13.97433340896695800, -65.90880809927183700 ) ) ; +#2463 = TOROIDAL_SURFACE ( 'NONE', #3182, 102.5000000000000100, 2.500000000000000000 ) ; +#2464 = CARTESIAN_POINT ( 'NONE', ( 0.4870528748084685400, 9.459255247918113300, 14.83566534127027300 ) ) ; +#2465 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9659258262890699800, 0.2588190451025143000 ) ) ; +#2466 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.18129507813263700, -62.96121213358090100 ) ) ; +#2467 = CIRCLE ( 'NONE', #551, 2.500000000000001300 ) ; +#2468 = CARTESIAN_POINT ( 'NONE', ( 13.49313651055454800, 10.00000000000000400, 15.32111431373177100 ) ) ; +#2469 = CARTESIAN_POINT ( 'NONE', ( 0.2582147994166825200, 9.708710703643491900, 14.24434461065008300 ) ) ; +#2470 = CARTESIAN_POINT ( 'NONE', ( 21.32942369399698300, -5.960521729848157000, 18.11286642393776700 ) ) ; +#2471 = CARTESIAN_POINT ( 'NONE', ( 8.360275124203347700, 13.00777687011804900, -18.67658847247495400 ) ) ; +#2472 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 4.688437913382174700, 17.08773323077997800 ) ) ; +#2473 = CARTESIAN_POINT ( 'NONE', ( 8.100847862532592800, 24.13900734308237600, -62.39833514079322900 ) ) ; +#2474 = CARTESIAN_POINT ( 'NONE', ( 20.18514999761698500, 3.451910004433980500, 19.05240838219976100 ) ) ; +#2475 = CARTESIAN_POINT ( 'NONE', ( 0.1634118036677780800, 9.811803310475395900, 13.92610960264280700 ) ) ; +#2476 = CARTESIAN_POINT ( 'NONE', ( 9.281020100177620700, 8.643865741348548700, 18.48197688185728900 ) ) ; +#2477 = CARTESIAN_POINT ( 'NONE', ( 13.14808126809231400, 10.00000000000000400, 15.39163675102723300 ) ) ; +#2478 = CARTESIAN_POINT ( 'NONE', ( 0.03495846218929023900, 9.953839591099685100, 13.27376884986407600 ) ) ; +#2479 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.298510400299580000E-032, 1.325001034533938600E-016 ) ) ; +#2480 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999999400, 0.1475758593047189200, -25.16574202084315800 ) ) ; +#2481 = DIRECTION ( 'NONE', ( -4.007720081139351300E-016, 0.2588190451025144700, -0.9659258262890699800 ) ) ; +#2482 = AXIS2_PLACEMENT_3D ( 'NONE', #993, #990, #986 ) ; +#2483 = CARTESIAN_POINT ( 'NONE', ( 24.89839999999999900, 9.624571084047833100, 17.15856364345287900 ) ) ; +#2484 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2485 = ORIENTED_EDGE ( 'NONE', *, *, #817, .F. ) ; +#2486 = CARTESIAN_POINT ( 'NONE', ( 15.98873096454601800, 13.82530292893733700, -65.77001973302924400 ) ) ; +#2487 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3204, #677, #485, #2893 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001538722777638038800, 0.003930052513631508700 ), + .UNSPECIFIED. ) ; +#2488 = ORIENTED_EDGE ( 'NONE', *, *, #1133, .F. ) ; +#2489 = ORIENTED_EDGE ( 'NONE', *, *, #2347, .T. ) ; +#2490 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2491 = CARTESIAN_POINT ( 'NONE', ( 16.53354329503612200, 13.52558267220471900, -65.45731853658506300 ) ) ; +#2492 = ORIENTED_EDGE ( 'NONE', *, *, #1556, .F. ) ; +#2493 = ORIENTED_EDGE ( 'NONE', *, *, #1261, .T. ) ; +#2494 = CARTESIAN_POINT ( 'NONE', ( 12.80111694850095500, 10.00000000000000200, 15.42873273449080800 ) ) ; +#2495 = CARTESIAN_POINT ( 'NONE', ( 16.79755213746741300, 13.37430100806966100, -65.28272951001794400 ) ) ; +#2496 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000002000, -0.4150812417257993500, -24.84128094142855800 ) ) ; +#2497 = AXIS2_PLACEMENT_3D ( 'NONE', #1037, #1782, #1519 ) ; +#2498 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025144700, 0.9659258262890698700 ) ) ; +#2499 = ORIENTED_EDGE ( 'NONE', *, *, #843, .T. ) ; +#2500 = CARTESIAN_POINT ( 'NONE', ( 22.93256289875418800, 7.810763643568688700, 16.93735720792028600 ) ) ; +#2501 = ORIENTED_EDGE ( 'NONE', *, *, #2629, .F. ) ; +#2502 = DIRECTION ( 'NONE', ( -0.8802913740347569900, -0.4744334482306234400, 0.0000000000000000000 ) ) ; +#2503 = VERTEX_POINT ( 'NONE', #2454 ) ; +#2504 = AXIS2_PLACEMENT_3D ( 'NONE', #3100, #134, #2177 ) ; +#2505 = ADVANCED_FACE ( 'NONE', ( #2414 ), #2416, .F. ) ; +#2506 = CARTESIAN_POINT ( 'NONE', ( 7.488416291753850400, 11.47788851493754500, -22.67481328856048600 ) ) ; +#2507 = ORIENTED_EDGE ( 'NONE', *, *, #585, .F. ) ; +#2508 = DIRECTION ( 'NONE', ( 0.4744334482306233900, -0.8802913740347569900, 9.876130085211454800E-016 ) ) ; +#2509 = CARTESIAN_POINT ( 'NONE', ( 12.90171725973505600, 11.02205614447032800, -20.85581036584115800 ) ) ; +#2510 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 22.50000000000000400 ) ) ; +#2511 = EDGE_CURVE ( 'NONE', #1100, #2823, #1478, .T. ) ; +#2512 = CARTESIAN_POINT ( 'NONE', ( 17.30690960927241000, 13.08159679329258800, -64.89911168032357100 ) ) ; +#2513 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999998500, -88.81885793164890700, -72.39384004447242700 ) ) ; +#2514 = CIRCLE ( 'NONE', #2946, 7.500000000000003600 ) ; +#2515 = CIRCLE ( 'NONE', #2461, 2.928932188134530700 ) ; +#2516 = AXIS2_PLACEMENT_3D ( 'NONE', #3088, #1253, #3380 ) ; +#2517 = CARTESIAN_POINT ( 'NONE', ( 17.54941742067594000, 12.94181909797821100, -64.69238729560895300 ) ) ; +#2518 = CARTESIAN_POINT ( 'NONE', ( 5.834821722338493700, 12.18129507813257800, -62.96121213358095800 ) ) ; +#2519 = DIRECTION ( 'NONE', ( 1.325001034533938600E-016, -1.588080900582084500E-016, -1.000000000000000000 ) ) ; +#2520 = CARTESIAN_POINT ( 'NONE', ( 24.89839999999998100, 6.709502169311816600, 27.50000000000002100 ) ) ; +#2521 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025144700 ) ) ; +#2522 = CARTESIAN_POINT ( 'NONE', ( 12.10297369133106400, 10.00000000000000400, 15.42913002260925200 ) ) ; +#2523 = CARTESIAN_POINT ( 'NONE', ( 7.488416291753872600, 11.69600936856535800, -61.15010120928894800 ) ) ; +#2524 = CARTESIAN_POINT ( 'NONE', ( 21.67293059273068300, 4.971133921944731200, 18.19546223935249100 ) ) ; +#2525 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999998500, 4.999999999999997300, 7.499999999999996400 ) ) ; +#2526 = CARTESIAN_POINT ( 'NONE', ( 3.249079732841116300, -10.00000000000054700, 17.32032696884524700 ) ) ; +#2527 = AXIS2_PLACEMENT_3D ( 'NONE', #3718, #810, #3704 ) ; +#2528 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.184850993605144000E-016, 12.49999999999999600 ) ) ; +#2529 = CARTESIAN_POINT ( 'NONE', ( 7.488416291753867200, 14.11082393428803700, -60.50305359653265900 ) ) ; +#2530 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890699800, -0.2588190451025143000 ) ) ; +#2531 = AXIS2_PLACEMENT_3D ( 'NONE', #145, #1596, #380 ) ; +#2532 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2533 = ORIENTED_EDGE ( 'NONE', *, *, #2325, .T. ) ; +#2534 = CARTESIAN_POINT ( 'NONE', ( 15.06872414672839100, -8.255527309635930100, 18.88335498103745300 ) ) ; +#2535 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 10.00000000000000200, 5.665249758739255600 ) ) ; +#2536 = CARTESIAN_POINT ( 'NONE', ( 6.297206644261576600, 12.35965124726591700, -63.62684641862992400 ) ) ; +#2537 = CARTESIAN_POINT ( 'NONE', ( 18.24643389075226500, 12.55270957304807800, -64.02796396799860200 ) ) ; +#2538 = ORIENTED_EDGE ( 'NONE', *, *, #1549, .F. ) ; +#2539 = CARTESIAN_POINT ( 'NONE', ( 7.226657681564610400, 6.222577491225856700, 19.38612370741760000 ) ) ; +#2540 = ORIENTED_EDGE ( 'NONE', *, *, #2289, .F. ) ; +#2541 = CARTESIAN_POINT ( 'NONE', ( 4.398336145474925000, -9.999999999999998200, 13.23447473476263000 ) ) ; +#2542 = EDGE_CURVE ( 'NONE', #1456, #1055, #718, .T. ) ; +#2543 = VERTEX_POINT ( 'NONE', #2435 ) ; +#2544 = ORIENTED_EDGE ( 'NONE', *, *, #1861, .F. ) ; +#2545 = ORIENTED_EDGE ( 'NONE', *, *, #1015, .F. ) ; +#2546 = CARTESIAN_POINT ( 'NONE', ( 7.995654605238190300, 11.59922884276065200, -61.63915613429529800 ) ) ; +#2547 = VERTEX_POINT ( 'NONE', #2316 ) ; +#2548 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2549 = ORIENTED_EDGE ( 'NONE', *, *, #1361, .T. ) ; +#2550 = ORIENTED_EDGE ( 'NONE', *, *, #1700, .T. ) ; +#2551 = CARTESIAN_POINT ( 'NONE', ( 7.835283447464910900, 14.18999878101661800, -60.79853810614488900 ) ) ; +#2552 = CARTESIAN_POINT ( 'NONE', ( 19.06357827766150200, 24.01142209705481200, -59.79133915250319800 ) ) ; +#2553 = CARTESIAN_POINT ( 'NONE', ( 3.407589497283750800, 5.263558899163272500, 18.20335045468318900 ) ) ; +#2554 = CARTESIAN_POINT ( 'NONE', ( 4.624705837374389000, -6.282183226029195200, 18.38011863062110500 ) ) ; +#2555 = EDGE_LOOP ( 'NONE', ( #3597, #3602, #3610, #3640 ) ) ; +#2556 = ORIENTED_EDGE ( 'NONE', *, *, #861, .T. ) ; +#2557 = CARTESIAN_POINT ( 'NONE', ( 19.06357827766150900, 12.18129507813263500, -62.96121213358091500 ) ) ; +#2558 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2718, #404, #2851, #1887, #1803, #1728 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.003035771775103657900, 0.006071543550207315900 ), + .UNSPECIFIED. ) ; +#2559 = VECTOR ( 'NONE', #1539, 1000.000000000000000 ) ; +#2560 = CARTESIAN_POINT ( 'NONE', ( 6.785311188838761600, 12.62371817786852200, -64.17788210232352200 ) ) ; +#2561 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000100, -19.75971928798615800, -31.08096380043227900 ) ) ; +#2562 = CARTESIAN_POINT ( 'NONE', ( 18.67075384923654000, 12.33281961381225300, -63.52670939933052800 ) ) ; +#2563 = CIRCLE ( 'NONE', #2705, 7.071067811865436400 ) ; +#2564 = CARTESIAN_POINT ( 'NONE', ( 5.782533333333342200, 6.666666666666674100, 18.68082896311803200 ) ) ; +#2565 = CIRCLE ( 'NONE', #3146, 100.0000000000000100 ) ; +#2566 = CARTESIAN_POINT ( 'NONE', ( 8.520197833454529900, 11.53761194792302400, -62.01852162894634500 ) ) ; +#2567 = ADVANCED_FACE ( 'NONE', ( #2223 ), #1391, .F. ) ; +#2568 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999996900, -4.999999999999971600, 20.42893218813457100 ) ) ; +#2569 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -3.673940397442059200E-015, -2.499999999999999600 ) ) ; +#2570 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2571 = FACE_OUTER_BOUND ( 'NONE', #1280, .T. ) ; +#2572 = CARTESIAN_POINT ( 'NONE', ( 19.69651271784130500, -5.892485388250618600E-012, 20.25268728215869300 ) ) ; +#2573 = CARTESIAN_POINT ( 'NONE', ( 8.201283391601171100, 14.32324625790447600, -61.03872285981494600 ) ) ; +#2574 = CARTESIAN_POINT ( 'NONE', ( 21.84740814467320300, 6.560555125901028200, 17.80113295493918800 ) ) ; +#2575 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.18129507813263500, -62.96121213358091500 ) ) ; +#2576 = CARTESIAN_POINT ( 'NONE', ( 6.199200000000008300, 9.999999999999998200, 17.57843258350778400 ) ) ; +#2577 = AXIS2_PLACEMENT_3D ( 'NONE', #1502, #715, #2232 ) ; +#2578 = CARTESIAN_POINT ( 'NONE', ( 7.556824396106165400, 13.06076042854388300, -64.87162242587845600 ) ) ; +#2579 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 6.709502169311822000, 27.50000000000000000 ) ) ; +#2580 = CARTESIAN_POINT ( 'NONE', ( 19.69651271784096400, -0.2952484969653210200, 20.25268728215880600 ) ) ; +#2581 = ADVANCED_FACE ( 'NONE', ( #3799 ), #627, .T. ) ; +#2582 = ORIENTED_EDGE ( 'NONE', *, *, #1897, .T. ) ; +#2583 = CARTESIAN_POINT ( 'NONE', ( 9.298104997967978800, 11.40730665197516700, -62.48316656635246600 ) ) ; +#2584 = CARTESIAN_POINT ( 'NONE', ( 13.49313651056541600, 10.00000000000000200, 15.32111431372949700 ) ) ; +#2585 = AXIS2_PLACEMENT_3D ( 'NONE', #2222, #1446, #1583 ) ; +#2586 = CARTESIAN_POINT ( 'NONE', ( 19.66993953917728900, -0.5884215594225155100, 20.26134732804776600 ) ) ; +#2587 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000004700, 10.00000000000000200, 14.27124344467704700 ) ) ; +#2588 = ORIENTED_EDGE ( 'NONE', *, *, #334, .F. ) ; +#2589 = ORIENTED_EDGE ( 'NONE', *, *, #2193, .F. ) ; +#2590 = CARTESIAN_POINT ( 'NONE', ( 11.75053580256310100, 10.00000000000000200, 15.39168111595774100 ) ) ; +#2591 = CARTESIAN_POINT ( 'NONE', ( 8.779918297093569600, 14.55187805460387400, -61.33732553765899100 ) ) ; +#2592 = CARTESIAN_POINT ( 'NONE', ( 4.793065140597200900, -0.4444707234017171700, -25.59546530397935300 ) ) ; +#2593 = ORIENTED_EDGE ( 'NONE', *, *, #744, .T. ) ; +#2594 = VERTEX_POINT ( 'NONE', #2127 ) ; +#2595 = AXIS2_PLACEMENT_3D ( 'NONE', #3134, #2206, #2841 ) ; +#2596 = ADVANCED_FACE ( 'NONE', ( #3028 ), #3643, .T. ) ; +#2597 = CARTESIAN_POINT ( 'NONE', ( 19.56775057873997900, -1.170996924159390700, 20.29182622161480200 ) ) ; +#2598 = ORIENTED_EDGE ( 'NONE', *, *, #37, .T. ) ; +#2599 = VERTEX_POINT ( 'NONE', #1643 ) ; +#2600 = ORIENTED_EDGE ( 'NONE', *, *, #1355, .T. ) ; +#2601 = ORIENTED_EDGE ( 'NONE', *, *, #3530, .T. ) ; +#2602 = CARTESIAN_POINT ( 'NONE', ( 19.49168265958593700, -1.460649558255743300, 20.31365538043752400 ) ) ; +#2603 = CARTESIAN_POINT ( 'NONE', ( 6.274893730624089700, 6.945078274141750700, 18.76169400471167500 ) ) ; +#2604 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2605 = CARTESIAN_POINT ( 'NONE', ( 7.820644360138750500, 13.21386146403837200, -65.08039811967015000 ) ) ; +#2606 = EDGE_LOOP ( 'NONE', ( #3699, #3726, #3790, #3817 ) ) ; +#2607 = ADVANCED_FACE ( 'NONE', ( #2937 ), #2957, .T. ) ; +#2608 = CARTESIAN_POINT ( 'NONE', ( 3.123901389810016300, -4.109468760028298600, 18.32519327271877400 ) ) ; +#2609 = LINE ( 'NONE', #592, #1063 ) ; +#2610 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3474, #3496, #3455, #3452 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 7.599531627337448100E-005 ), + .UNSPECIFIED. ) ; +#2611 = FACE_OUTER_BOUND ( 'NONE', #3767, .T. ) ; +#2612 = CARTESIAN_POINT ( 'NONE', ( 19.21190925372471600, -2.300210710287801300, 20.38106994301883600 ) ) ; +#2613 = AXIS2_PLACEMENT_3D ( 'NONE', #3805, #635, #648 ) ; +#2614 = CARTESIAN_POINT ( 'NONE', ( 9.567991409381345800, 11.35541060937311500, -62.62467700857963100 ) ) ; +#2615 = CARTESIAN_POINT ( 'NONE', ( 17.18723403018991300, 5.261965970764384400, 20.42893218745973600 ) ) ; +#2616 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -3.673940397442059200E-015, -2.499999999999999600 ) ) ; +#2617 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1610, #181, #1344, #3757, #1632, #3471, #2280, #195, #1966, #2592, #771, #473, #1009, #3722 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002598198795751666300, 0.003897298193627504200, 0.005196397591503342100, 0.006495496989379180100, 0.007794596387255018000, 0.01039279518300668400 ), + .UNSPECIFIED. ) ; +#2618 = CARTESIAN_POINT ( 'NONE', ( 6.689753342334594100, 10.00000000000087200, 17.53233944198412400 ) ) ; +#2619 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 7.773724697258098900, -46.51193553422098900 ) ) ; +#2620 = AXIS2_PLACEMENT_3D ( 'NONE', #2107, #3537, #1655 ) ; +#2621 = CARTESIAN_POINT ( 'NONE', ( 8.977783270150268900, 14.63323717001098200, -61.42638966327040600 ) ) ; +#2622 = ADVANCED_FACE ( 'NONE', ( #535 ), #2846, .F. ) ; +#2623 = CARTESIAN_POINT ( 'NONE', ( 8.362487690312569600, 13.52341386436768800, -65.45640775385744800 ) ) ; +#2624 = CARTESIAN_POINT ( 'NONE', ( 5.201887282158691200, 5.894115778564526800E-012, 20.25268728215868900 ) ) ; +#2625 = CARTESIAN_POINT ( 'NONE', ( 7.769904431267289800, 10.00000000000000200, 14.39245831977614100 ) ) ; +#2626 = EDGE_CURVE ( 'NONE', #872, #1641, #45, .T. ) ; +#2627 = CARTESIAN_POINT ( 'NONE', ( 10.10485602116760100, 11.22745555605337000, -62.87820792199465800 ) ) ; +#2628 = VERTEX_POINT ( 'NONE', #1304 ) ; +#2629 = EDGE_CURVE ( 'NONE', #2866, #3231, #3626, .T. ) ; +#2630 = ORIENTED_EDGE ( 'NONE', *, *, #857, .F. ) ; +#2631 = ORIENTED_EDGE ( 'NONE', *, *, #224, .T. ) ; +#2632 = ORIENTED_EDGE ( 'NONE', *, *, #60, .F. ) ; +#2633 = CARTESIAN_POINT ( 'NONE', ( 9.384165767688216400, 14.79944115611817600, -61.58554552874165500 ) ) ; +#2634 = EDGE_LOOP ( 'NONE', ( #3275, #3381, #3423, #3475, #3508 ) ) ; +#2635 = CARTESIAN_POINT ( 'NONE', ( 14.84683502626336700, 9.137347922157079700, 18.16018509475853200 ) ) ; +#2636 = CARTESIAN_POINT ( 'NONE', ( 6.725179759629947200, 7.159141310377515700, 18.80105982760455800 ) ) ; +#2637 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2638 = ORIENTED_EDGE ( 'NONE', *, *, #414, .T. ) ; +#2639 = ORIENTED_EDGE ( 'NONE', *, *, #2236, .T. ) ; +#2640 = CARTESIAN_POINT ( 'NONE', ( 8.637196456587402000, 13.67794936262530700, -65.62132409098845200 ) ) ; +#2641 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999996700, 4.999999999999995600, -2.698454273810511800E-017 ) ) ; +#2642 = ORIENTED_EDGE ( 'NONE', *, *, #688, .F. ) ; +#2643 = CARTESIAN_POINT ( 'NONE', ( 18.67379999999996400, -3.354751084655891000, 20.42893218813456700 ) ) ; +#2644 = ORIENTED_EDGE ( 'NONE', *, *, #1355, .F. ) ; +#2645 = EDGE_LOOP ( 'NONE', ( #1275, #693, #2997, #2190 ) ) ; +#2646 = CARTESIAN_POINT ( 'NONE', ( 10.36760958917387900, 11.15071312508822900, -62.98650958093024600 ) ) ; +#2647 = CARTESIAN_POINT ( 'NONE', ( 19.35193948907822300, 10.00000000000057200, 17.50587012975725900 ) ) ; +#2648 = CARTESIAN_POINT ( 'NONE', ( 18.95589658419101300, -2.831332698717524000, 20.42893218813457100 ) ) ; +#2649 = CARTESIAN_POINT ( 'NONE', ( 7.135261033224732200, 10.00000000000000000, 17.50071602367432900 ) ) ; +#2650 = LOCAL_TIME ( 17, 46, 53.00000000000000000, #1922 ) ; +#2651 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 10.00000000000000200, 12.51759777210976300 ) ) ; +#2652 = CARTESIAN_POINT ( 'NONE', ( 9.590197342415113000, 14.88325701718037000, -61.65465656987174000 ) ) ; +#2653 = EDGE_CURVE ( 'NONE', #1547, #2866, #1308, .T. ) ; +#2654 = VECTOR ( 'NONE', #793, 1000.000000000000000 ) ; +#2655 = CARTESIAN_POINT ( 'NONE', ( 21.32942369399698300, -5.960521729848157000, 18.11286642393776700 ) ) ; +#2656 = FACE_OUTER_BOUND ( 'NONE', #1911, .T. ) ; +#2657 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2425, #327, #52, #623, #3322, #1488, #1199, #901 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 3.728482938708032500E-015, 0.002610629555723539400, 0.003915944333583445800, 0.005221259111443350900 ), + .UNSPECIFIED. ) ; +#2658 = CARTESIAN_POINT ( 'NONE', ( 9.193883050059628900, 13.97443852970067500, -65.90976783351035800 ) ) ; +#2659 = CARTESIAN_POINT ( 'NONE', ( 8.094637983697515100, 10.00000000000000200, 14.49862145917701800 ) ) ; +#2660 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 10.00000000000000400, 12.54292954420088600 ) ) ; +#2661 = AXIS2_PLACEMENT_3D ( 'NONE', #1297, #1224, #1215 ) ; +#2662 = CARTESIAN_POINT ( 'NONE', ( 10.86931574879059200, 10.96965548240576100, -63.17402554077448000 ) ) ; +#2663 = CARTESIAN_POINT ( 'NONE', ( 16.80376201630258500, -9.999999999999998200, 14.49862145917775900 ) ) ; +#2664 = CARTESIAN_POINT ( 'NONE', ( 20.58475036051542200, -6.178701288272028700, 18.29526054258716900 ) ) ; +#2665 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1218, #3168, #2478, #2475, #2469, #2464, #2456, #2447, #2436, #2431, #2422, #2418, #2405, #2399, #2388, #2380, #2374, #2369 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 2.515370046866722300E-016, 0.001016457793701431100, 0.002032915587402610600, 0.003049373381103790200, 0.004065831174804966300, 0.006098746762207313300, 0.007115204555908486800, 0.007623433452759072200, 0.008131662349609655000 ), + .UNSPECIFIED. ) ; +#2666 = CARTESIAN_POINT ( 'NONE', ( 10.00771228757015600, 15.04509884789089100, -61.77456484798071300 ) ) ; +#2667 = CARTESIAN_POINT ( 'NONE', ( 7.581748871479785400, 7.522862197976129700, 18.85651978935542400 ) ) ; +#2668 = ORIENTED_EDGE ( 'NONE', *, *, #1059, .F. ) ; +#2669 = CARTESIAN_POINT ( 'NONE', ( 7.488416291753861900, 14.11082393428810100, -60.50305359653262400 ) ) ; +#2670 = CARTESIAN_POINT ( 'NONE', ( 9.476069390898464600, 14.11654987461515500, -66.03342625220335500 ) ) ; +#2671 = CARTESIAN_POINT ( 'NONE', ( 15.37813218813453100, -1.925929944387235900E-031, 22.50000000000000400 ) ) ; +#2672 = ORIENTED_EDGE ( 'NONE', *, *, #1109, .F. ) ; +#2673 = ORIENTED_EDGE ( 'NONE', *, *, #908, .T. ) ; +#2674 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999996900, 4.999999999999971600, 20.42893218813457100 ) ) ; +#2675 = AXIS2_PLACEMENT_3D ( 'NONE', #2136, #2122, #1816 ) ; +#2676 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 18.09635858759372700, -61.37627564304205000 ) ) ; +#2677 = VERTEX_POINT ( 'NONE', #1165 ) ; +#2678 = CARTESIAN_POINT ( 'NONE', ( 14.21572941021420700, 8.460904434022321400, 18.85664821965398700 ) ) ; +#2679 = EDGE_LOOP ( 'NONE', ( #3284, #3317, #3323, #3326, #3331, #3334, #3336 ) ) ; +#2680 = CARTESIAN_POINT ( 'NONE', ( 11.10527184034634200, 10.86393322911802900, -63.25081798650648300 ) ) ; +#2681 = VERTEX_POINT ( 'NONE', #1139 ) ; +#2682 = ORIENTED_EDGE ( 'NONE', *, *, #2128, .T. ) ; +#2683 = EDGE_CURVE ( 'NONE', #320, #126, #1209, .T. ) ; +#2684 = DIRECTION ( 'NONE', ( 3.871160330909826300E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2685 = CARTESIAN_POINT ( 'NONE', ( 7.970087270605452200, 10.00000000000000200, 17.45812994664404300 ) ) ; +#2686 = CARTESIAN_POINT ( 'NONE', ( 11.40526348943795500, 10.00000000000000400, 15.32111431373016700 ) ) ; +#2687 = ORIENTED_EDGE ( 'NONE', *, *, #1575, .F. ) ; +#2688 = CARTESIAN_POINT ( 'NONE', ( 10.21935204319549800, 15.12321172042747700, -61.82541569265122700 ) ) ; +#2689 = VERTEX_POINT ( 'NONE', #1195 ) ; +#2690 = CARTESIAN_POINT ( 'NONE', ( 7.391309214280390400, 7.645653937515441500, 18.73159073756458800 ) ) ; +#2691 = ADVANCED_FACE ( 'NONE', ( #624 ), #2754, .T. ) ; +#2692 = ORIENTED_EDGE ( 'NONE', *, *, #709, .F. ) ; +#2693 = LINE ( 'NONE', #3813, #932 ) ; +#2694 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.037274284438658100E-016, 3.871160330909826300E-016 ) ) ; +#2695 = DIRECTION ( 'NONE', ( 0.7499999999999951200, 0.1711927069771173600, -0.6388998803238692400 ) ) ; +#2697 = CARTESIAN_POINT ( 'NONE', ( 10.04946353090667600, 14.37647756280649200, -66.24355561749796100 ) ) ; +#2696 = FACE_OUTER_BOUND ( 'NONE', #1146, .T. ) ; +#2698 = AXIS2_PLACEMENT_3D ( 'NONE', #2186, #3000, #944 ) ; +#2699 = CARTESIAN_POINT ( 'NONE', ( 8.748431914338157300, 10.00000000000000200, 14.69451307130744400 ) ) ; +#2700 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 27.50000000000000400 ) ) ; +#2701 = LOCAL_TIME ( 17, 46, 53.00000000000000000, #183 ) ; +#2702 = CARTESIAN_POINT ( 'NONE', ( 11.53395442714924900, 10.63129760686702200, -63.37850335945806500 ) ) ; +#2703 = CARTESIAN_POINT ( 'NONE', ( 19.11586666666667600, 6.666666666666664300, 18.68082896311803200 ) ) ; +#2704 = AXIS2_PLACEMENT_3D ( 'NONE', #3606, #1699, #1777 ) ; +#2705 = AXIS2_PLACEMENT_3D ( 'NONE', #3089, #3382, #963 ) ; +#2706 = CARTESIAN_POINT ( 'NONE', ( 10.64939764815835200, 15.26667697343651800, -61.91114308590146500 ) ) ; +#2707 = ADVANCED_FACE ( 'NONE', ( #2028 ), #1120, .F. ) ; +#2708 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2709 = CARTESIAN_POINT ( 'NONE', ( 7.988991526336580900, 7.673159582446741600, 18.87032528560173000 ) ) ; +#2710 = DIRECTION ( 'NONE', ( -4.007720081139350800E-016, 0.2588190451025143000, -0.9659258262890700900 ) ) ; +#2711 = EDGE_CURVE ( 'NONE', #2261, #2677, #2251, .T. ) ; +#2712 = CARTESIAN_POINT ( 'NONE', ( 10.34067056550138600, 14.49429361502890500, -66.33003234857751800 ) ) ; +#2713 = CARTESIAN_POINT ( 'NONE', ( 10.68267058978555200, -8.460904434022083400, 18.85664821965416800 ) ) ; +#2714 = CARTESIAN_POINT ( 'NONE', ( 16.04214561684338100, -6.524255011830925700, 20.06062420243769400 ) ) ; +#2715 = EDGE_LOOP ( 'NONE', ( #3522, #3556, #3558, #3570 ) ) ; +#2716 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9119037906607175800, 0.4104040406460618400 ) ) ; +#2717 = CARTESIAN_POINT ( 'NONE', ( 15.91363999694831200, 8.019058510556435600, 18.89334427247217700 ) ) ; +#2718 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.014749828072294400, 13.61697764103997500 ) ) ; +#2719 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1595, #1536, #1507, #1499 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.673617379884035500E-018, 7.599531627336754200E-005 ), + .UNSPECIFIED. ) ; +#2720 = ORIENTED_EDGE ( 'NONE', *, *, #536, .F. ) ; +#2721 = CARTESIAN_POINT ( 'NONE', ( 5.014558704718539600, 10.00000000000000200, 13.41634289988311200 ) ) ; +#2722 = ORIENTED_EDGE ( 'NONE', *, *, #2916, .T. ) ; +#2723 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -4.014749828072296200, 13.61697764103997200 ) ) ; +#2724 = CARTESIAN_POINT ( 'NONE', ( 8.365835289573746900, 10.00000000000000000, 17.44519991596121500 ) ) ; +#2725 = AXIS2_PLACEMENT_3D ( 'NONE', #185, #140, #163 ) ; +#2726 = ORIENTED_EDGE ( 'NONE', *, *, #2099, .F. ) ; +#2727 = ORIENTED_EDGE ( 'NONE', *, *, #362, .F. ) ; +#2728 = CARTESIAN_POINT ( 'NONE', ( 11.72108878243527900, 10.50435437045164000, -63.42701701902899500 ) ) ; +#2729 = CARTESIAN_POINT ( 'NONE', ( 25.15642280172790600, -5.084591110718484700, 17.51037509623230900 ) ) ; +#2730 = CARTESIAN_POINT ( 'NONE', ( 9.077561436095965800, 10.00000000000000200, 14.78404628562221900 ) ) ; +#2731 = ORIENTED_EDGE ( 'NONE', *, *, #60, .T. ) ; +#2732 = ORIENTED_EDGE ( 'NONE', *, *, #1427, .F. ) ; +#2733 = CARTESIAN_POINT ( 'NONE', ( 4.949199999999994000, 12.65496680558645600, -55.06972082365662400 ) ) ; +#2734 = CARTESIAN_POINT ( 'NONE', ( 10.86780292416969700, 15.33202897545177700, -61.94602226466781800 ) ) ; +#2735 = DIRECTION ( 'NONE', ( -1.583543170958170900E-016, 0.4104040406460617900, -0.9119037906607174700 ) ) ; +#2736 = VERTEX_POINT ( 'NONE', #1021 ) ; +#2737 = VERTEX_POINT ( 'NONE', #850 ) ; +#2738 = CARTESIAN_POINT ( 'NONE', ( 22.44919999999999400, 4.651280611074646700, -30.32742587825108100 ) ) ; +#2739 = ORIENTED_EDGE ( 'NONE', *, *, #110, .T. ) ; +#2740 = CARTESIAN_POINT ( 'NONE', ( 9.181338429767201600, 8.076069838898806800, 18.89202875594799700 ) ) ; +#2741 = CARTESIAN_POINT ( 'NONE', ( 9.520267811865469600, 3.586907429118606100E-016, 17.50000000000000000 ) ) ; +#2742 = CARTESIAN_POINT ( 'NONE', ( 10.93385690867264300, 14.69235726841889700, -66.46816650825823600 ) ) ; +#2743 = CARTESIAN_POINT ( 'NONE', ( 21.10389635281552900, -9.999999999999996400, 17.35167560874896600 ) ) ; +#2744 = LOCAL_TIME ( 17, 46, 53.00000000000000000, #3440 ) ; +#2745 = CARTESIAN_POINT ( 'NONE', ( 9.510092843235773000, 10.00000000000000400, 17.41769120120936500 ) ) ; +#2746 = DIRECTION ( 'NONE', ( 1.335906693713116800E-016, 0.2588190451025143600, -0.9659258262890700900 ) ) ; +#2747 = CARTESIAN_POINT ( 'NONE', ( 12.03358792325947800, 10.25797194794428300, -63.50204468945198500 ) ) ; +#2748 = LINE ( 'NONE', #2795, #1713 ) ; +#2749 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -10.00000000000000400, -7.499999999999995600 ) ) ; +#2750 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, 15.34856020936184800, -27.46109844868017500 ) ) ; +#2751 = CIRCLE ( 'NONE', #3271, 4.999999999999997300 ) ; +#2752 = CARTESIAN_POINT ( 'NONE', ( 17.29745350963728300, 24.19980449833025900, -61.92912330680476200 ) ) ; +#2753 = AXIS2_PLACEMENT_3D ( 'NONE', #157, #153, #143 ) ; +#2754 = CYLINDRICAL_SURFACE ( 'NONE', #2301, 10.00000000000000200 ) ; +#2755 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 10.00000000000000200, 5.665249758739255600 ) ) ; +#2756 = CARTESIAN_POINT ( 'NONE', ( 10.06917332112252200, 10.00000000000000200, 15.03673185611291500 ) ) ; +#2757 = CARTESIAN_POINT ( 'NONE', ( 22.44919999999998700, -4.374999999999897900, -1.172277716886112900 ) ) ; +#2758 = CARTESIAN_POINT ( 'NONE', ( 11.31269268146081900, 15.44216185615169600, -62.00137173307813800 ) ) ; +#2759 = CARTESIAN_POINT ( 'NONE', ( 5.782533333333336900, -6.666666666666666100, 18.68082896311803500 ) ) ; +#2760 = AXIS2_PLACEMENT_3D ( 'NONE', #458, #539, #436 ) ; +#2761 = CARTESIAN_POINT ( 'NONE', ( 9.936381602662729400, 8.281219051251595100, 18.88001408658469800 ) ) ; +#2762 = CARTESIAN_POINT ( 'NONE', ( 11.23780737761886600, 14.77270140274276700, -66.51994631477950300 ) ) ; +#2763 = CARTESIAN_POINT ( 'NONE', ( 14.81991496983728700, 12.86956953926632300, -18.11889706685130000 ) ) ; +#2764 = AXIS2_PLACEMENT_3D ( 'NONE', #523, #516, #511 ) ; +#2765 = CARTESIAN_POINT ( 'NONE', ( 12.79036387568545600, 23.47659888436901500, -64.30090403859946900 ) ) ; +#2766 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -3.061616997868382300E-015, -12.50000000000000000 ) ) ; +#2767 = CARTESIAN_POINT ( 'NONE', ( 12.15246683668629900, 10.14140757904717600, -63.52682215106101200 ) ) ; +#2768 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -10.00000000000000400, 3.437697544725253000E-015 ) ) ; +#2769 = EDGE_LOOP ( 'NONE', ( #1320, #1635, #1334, #966, #1648, #1339, #974 ) ) ; +#2770 = ADVANCED_FACE ( 'NONE', ( #3536 ), #3450, .F. ) ; +#2771 = CARTESIAN_POINT ( 'NONE', ( 10.24595869764842400, 10.00000000000420300, 17.41257339466145700 ) ) ; +#2772 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.999807868217022400, 12.56826204476220000 ) ) ; +#2773 = CARTESIAN_POINT ( 'NONE', ( 11.54065553320459400, 15.48699437936744000, -62.02189397328660900 ) ) ; +#2774 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000031400, -4.999999999999971600, 20.42893218813457100 ) ) ; +#2775 = VERTEX_POINT ( 'NONE', #811 ) ; +#2776 = CARTESIAN_POINT ( 'NONE', ( 7.553591196527359700, 13.10491831773607700, -19.06056575287890100 ) ) ; +#2777 = ORIENTED_EDGE ( 'NONE', *, *, #1134, .T. ) ; +#2778 = AXIS2_PLACEMENT_3D ( 'NONE', #396, #379, #371 ) ; +#2779 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 5.015388530222597100, 13.42274950505743000 ) ) ; +#2780 = CARTESIAN_POINT ( 'NONE', ( 7.348982579324069100, 24.21837655669429500, -61.67084283114292000 ) ) ; +#2781 = ORIENTED_EDGE ( 'NONE', *, *, #2366, .F. ) ; +#2782 = ORIENTED_EDGE ( 'NONE', *, *, #2653, .T. ) ; +#2783 = DIRECTION ( 'NONE', ( -1.734723475976806100E-015, -0.2588190451025143600, 0.9659258262890700900 ) ) ; +#2784 = AXIS2_PLACEMENT_3D ( 'NONE', #940, #924, #904 ) ; +#2785 = ORIENTED_EDGE ( 'NONE', *, *, #85, .T. ) ; +#2786 = CARTESIAN_POINT ( 'NONE', ( 11.84410589886215500, 14.88025082463723000, -66.58786809820912800 ) ) ; +#2787 = ORIENTED_EDGE ( 'NONE', *, *, #2629, .T. ) ; +#2788 = CARTESIAN_POINT ( 'NONE', ( 9.019296832320955900, 7.699368914624471900, 19.11313420167401100 ) ) ; +#2789 = CARTESIAN_POINT ( 'NONE', ( 10.73581327150105800, 10.00000000000000200, 15.18429198848004300 ) ) ; +#2790 = VERTEX_POINT ( 'NONE', #802 ) ; +#2791 = ORIENTED_EDGE ( 'NONE', *, *, #1360, .T. ) ; +#2792 = CARTESIAN_POINT ( 'NONE', ( 12.33233581290436500, 9.972795681479533800, -63.55891290123214100 ) ) ; +#2793 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9659258262890700900, -0.2588190451025145200 ) ) ; +#2794 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999999400, -0.8012911872733088400, -24.53576872606909400 ) ) ; +#2795 = CARTESIAN_POINT ( 'NONE', ( 19.94920000000000100, 12.65496680558645800, -55.06972082365662400 ) ) ; +#2796 = ORIENTED_EDGE ( 'NONE', *, *, #2269, .T. ) ; +#2798 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 9.999423642752413200, 12.59359090277150600 ) ) ; +#2797 = CIRCLE ( 'NONE', #2778, 5.000000000000000000 ) ; +#2799 = CARTESIAN_POINT ( 'NONE', ( 12.44919999999999800, 22.07027925878596300, -52.54689545533518900 ) ) ; +#2800 = LOCAL_TIME ( 17, 46, 53.00000000000000000, #1976 ) ; +#2801 = CARTESIAN_POINT ( 'NONE', ( 11.99537942415616800, 15.54705907013210400, -62.04873404026869100 ) ) ; +#2802 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000500, -1.345292019307268400, -23.93268423954025100 ) ) ; +#2803 = CARTESIAN_POINT ( 'NONE', ( 19.11586666666666500, -6.666666666666666100, 18.68082896311803500 ) ) ; +#2804 = CARTESIAN_POINT ( 'NONE', ( 10.68267058977963300, 8.460904434013725600, 18.85664821966121700 ) ) ; +#2805 = CIRCLE ( 'NONE', #1988, 5.000000000000000000 ) ; +#2806 = CARTESIAN_POINT ( 'NONE', ( 12.14724684302102100, 14.90792038536881000, -66.60445523421486800 ) ) ; +#2807 = ADVANCED_FACE ( 'NONE', ( #1928 ), #356, .T. ) ; +#2808 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999998500, -1.147542621945991200, -24.19086389933252300 ) ) ; +#2809 = CARTESIAN_POINT ( 'NONE', ( 12.39067607831518500, 9.925206530035470800, -63.56571585367776600 ) ) ; +#2810 = DIRECTION ( 'NONE', ( -0.3535533905932738400, 0.0000000000000000000, 0.9354143466934852200 ) ) ; +#2811 = AXIS2_PLACEMENT_3D ( 'NONE', #1358, #1322, #1353 ) ; +#2812 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999995800, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#2813 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2814 = CARTESIAN_POINT ( 'NONE', ( 12.22273513226589400, 15.56254490949217100, -62.05523667299010500 ) ) ; +#2815 = PLANE ( 'NONE', #106 ) ; +#2816 = AXIS2_PLACEMENT_3D ( 'NONE', #104, #5, #271 ) ; +#2817 = ORIENTED_EDGE ( 'NONE', *, *, #1544, .T. ) ; +#2818 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999998000, 7.773724697258101600, -46.51193553422098900 ) ) ; +#2819 = ORIENTED_EDGE ( 'NONE', *, *, #532, .T. ) ; +#2820 = VERTEX_POINT ( 'NONE', #699 ) ; +#2821 = CARTESIAN_POINT ( 'NONE', ( 12.75351158821576700, 14.90777790182936100, -66.60436833706857800 ) ) ; +#2822 = DIRECTION ( 'NONE', ( -0.9354143466934854400, -1.226634733346699600E-016, -0.3535533905932739000 ) ) ; +#2823 = VERTEX_POINT ( 'NONE', #687 ) ; +#2824 = ORIENTED_EDGE ( 'NONE', *, *, #987, .T. ) ; +#2825 = CARTESIAN_POINT ( 'NONE', ( 12.50817868220026300, 9.925449308563791800, -63.56567762183893700 ) ) ; +#2826 = CARTESIAN_POINT ( 'NONE', ( 7.806231107205385400, 6.695526535362381200, 19.36418800647764400 ) ) ; +#2827 = EDGE_LOOP ( 'NONE', ( #1652, #1695, #1736, #1788 ) ) ; +#2828 = ORIENTED_EDGE ( 'NONE', *, *, #2347, .F. ) ; +#2829 = EDGE_LOOP ( 'NONE', ( #1656, #1368, #1014, #1380 ) ) ; +#2830 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #2020, #1341, ( #1831 ) ) ; +#2831 = CARTESIAN_POINT ( 'NONE', ( 12.67743369116169200, 15.56246522046833600, -62.05520251536987800 ) ) ; +#2832 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000004700, -4.999999999999998200, 14.27124344467705100 ) ) ; +#2833 = ORIENTED_EDGE ( 'NONE', *, *, #3114, .T. ) ; +#2834 = CARTESIAN_POINT ( 'NONE', ( 10.97824477926464900, 10.00000000000000200, 17.41044999498254200 ) ) ; +#2835 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2836 = AXIS2_PLACEMENT_3D ( 'NONE', #1281, #1265, #1260 ) ; +#2837 = CARTESIAN_POINT ( 'NONE', ( 13.05663538930220300, 14.87996612381471600, -66.58769424384286100 ) ) ; +#2838 = DIRECTION ( 'NONE', ( -1.734723475976808100E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2839 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.037274284438658200E-016, -3.871160330909826300E-016 ) ) ; +#2840 = PERSON_AND_ORGANIZATION ( #2275, #3296 ) ; +#2841 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2842 = FACE_OUTER_BOUND ( 'NONE', #2084, .T. ) ; +#2843 = FACE_OUTER_BOUND ( 'NONE', #595, .T. ) ; +#2844 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.298510400299580000E-032, 1.325001034533938600E-016 ) ) ; +#2845 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #312, #340, #2332, #2390, #531, #2053, #3229, #3303, #1376, #3278, #2042, #1180, #2434, #3294 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 4.527761199350148600E-018, 0.0008145167941101340300, 0.001629033588220263500, 0.003258067176440523100, 0.004072583970550653100, 0.004887100764660782700, 0.006516134352881050600 ), + .UNSPECIFIED. ) ; +#2847 = CARTESIAN_POINT ( 'NONE', ( 12.56660754053947200, 9.973271821898045200, -63.55883711144862500 ) ) ; +#2846 = CYLINDRICAL_SURFACE ( 'NONE', #2321, 0.5800000000000006300 ) ; +#2848 = CARTESIAN_POINT ( 'NONE', ( 90.32016550602631400, 13.40741737109300400, -20.21665475151220500 ) ) ; +#2849 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999995800, -9.184850993605144000E-016, 7.500000000000000000 ) ) ; +#2850 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 4.999999999999995600, -7.500000000000000900 ) ) ; +#2851 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 5.997907696802582400, 13.20722971111320000 ) ) ; +#2852 = CARTESIAN_POINT ( 'NONE', ( 12.90477654196733700, 15.54689984922167800, -62.04866568792927200 ) ) ; +#2853 = CARTESIAN_POINT ( 'NONE', ( 3.568976306003019100, 5.960521729848161400, 18.11286642393776700 ) ) ; +#2854 = CARTESIAN_POINT ( 'NONE', ( 4.945400490487868300, -9.999999999999996400, 17.44481467049844900 ) ) ; +#2855 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1200, #1351, ( #1831 ) ) ; +#2856 = CARTESIAN_POINT ( 'NONE', ( 5.686490746275281600, 2.300210710287800900, 20.38106994301884000 ) ) ; +#2857 = CARTESIAN_POINT ( 'NONE', ( 8.365835289578894800, -10.00000000000029500, 17.44519991596049400 ) ) ; +#2858 = ADVANCED_FACE ( 'NONE', ( #2656 ), #1520, .F. ) ; +#2859 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000800, -1.144762937382534100, -24.19409331178500700 ) ) ; +#2860 = EDGE_CURVE ( 'NONE', #2681, #3135, #266, .T. ) ; +#2861 = ORIENTED_EDGE ( 'NONE', *, *, #1980, .T. ) ; +#2862 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, 4.999999999999986700, -22.46941544652785800 ) ) ; +#2863 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.999423642752413200, 12.59359090277150600 ) ) ; +#2864 = CARTESIAN_POINT ( 'NONE', ( 13.66286636671035000, 14.77216645903267000, -66.51960248529501000 ) ) ; +#2865 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#2866 = VERTEX_POINT ( 'NONE', #323 ) ; +#2867 = ORIENTED_EDGE ( 'NONE', *, *, #756, .T. ) ; +#2868 = ORIENTED_EDGE ( 'NONE', *, *, #615, .F. ) ; +#2869 = CARTESIAN_POINT ( 'NONE', ( 19.85170512318957500, -6.421387181159029300, 18.49541510015830100 ) ) ; +#2870 = ORIENTED_EDGE ( 'NONE', *, *, #2070, .F. ) ; +#2871 = CARTESIAN_POINT ( 'NONE', ( 12.74674999836241400, 10.14220578908171300, -63.52665572047939700 ) ) ; +#2872 = ORIENTED_EDGE ( 'NONE', *, *, #117, .T. ) ; +#2873 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999998000, 10.18853926298077500, -45.86488792146470000 ) ) ; +#2874 = CARTESIAN_POINT ( 'NONE', ( 11.40526348943201800, 10.00000000000000200, 15.32111431372902800 ) ) ; +#2875 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000100, 1.758564121058934400, -25.31515713847477400 ) ) ; +#2876 = ORIENTED_EDGE ( 'NONE', *, *, #3114, .F. ) ; +#2877 = CARTESIAN_POINT ( 'NONE', ( 13.35944977504207600, 15.48669584313966800, -62.02175775429928700 ) ) ; +#2878 = ADVANCED_FACE ( 'NONE', ( #448 ), #939, .T. ) ; +#2879 = AXIS2_PLACEMENT_3D ( 'NONE', #2378, #3281, #1170 ) ; +#2880 = ORIENTED_EDGE ( 'NONE', *, *, #1041, .F. ) ; +#2881 = VERTEX_POINT ( 'NONE', #252 ) ; +#2882 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -9.999423642752454100, 12.59359090277177100 ) ) ; +#2883 = ORIENTED_EDGE ( 'NONE', *, *, #2419, .T. ) ; +#2884 = AXIS2_PLACEMENT_3D ( 'NONE', #1423, #1413, #1408 ) ; +#2885 = FACE_OUTER_BOUND ( 'NONE', #2201, .T. ) ; +#2886 = CARTESIAN_POINT ( 'NONE', ( 13.96682733897666900, 14.69169250610643700, -66.46772359430387700 ) ) ; +#2887 = CARTESIAN_POINT ( 'NONE', ( 14.65244130233540800, 10.00000000000240000, 17.41257339471603100 ) ) ; +#2888 = CARTESIAN_POINT ( 'NONE', ( 22.44919999999999400, 2.371521134422852400, -31.35343597986623700 ) ) ; +#2889 = CARTESIAN_POINT ( 'NONE', ( 17.40998370824612700, 21.11132182176493500, -58.62727584096748500 ) ) ; +#2890 = TOROIDAL_SURFACE ( 'NONE', #3127, 14.14213562373095300, 10.00000000000000000 ) ; +#2891 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 10.00000000000000200, 5.665249758739255600 ) ) ; +#2892 = CARTESIAN_POINT ( 'NONE', ( 12.86584066697313100, 10.25888301581027700, -63.50181746461132800 ) ) ; +#2893 = CARTESIAN_POINT ( 'NONE', ( 5.782533333333336900, -6.666666666666666100, 18.68082896311803500 ) ) ; +#2894 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3820, #3724, #3703, #3638, #3612, #633, #3519, #933 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.003541648018292537300, 0.004428192120944864400, 0.005314736223597191600, 0.007087824428901847600 ), + .UNSPECIFIED. ) ; +#2895 = CARTESIAN_POINT ( 'NONE', ( 22.44919999999999400, 2.010865787374305700, -30.55207209081223500 ) ) ; +#2896 = ADVANCED_FACE ( 'NONE', ( #1716 ), #3255, .F. ) ; +#2897 = CARTESIAN_POINT ( 'NONE', ( 13.58742050427843800, 15.44179145063390900, -62.00119535839932900 ) ) ; +#2898 = CARTESIAN_POINT ( 'NONE', ( 22.33272020321760100, 1.648080443632109500, -29.77416174320206800 ) ) ; +#2899 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025143600, 0.9659258262890700900 ) ) ; +#2900 = AXIS2_PLACEMENT_3D ( 'NONE', #1390, #1383, #1365 ) ; +#2901 = DIRECTION ( 'NONE', ( 1.224646799147353200E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2902 = CARTESIAN_POINT ( 'NONE', ( 14.55968793118151400, 14.49354103053791000, -66.32948662354839100 ) ) ; +#2903 = CARTESIAN_POINT ( 'NONE', ( 21.99135803211500200, 1.102199361762374900, -28.64021808456819000 ) ) ; +#2904 = ORIENTED_EDGE ( 'NONE', *, *, #2452, .F. ) ; +#2905 = CARTESIAN_POINT ( 'NONE', ( 13.17851143177303700, 10.50520475791019800, -63.42670996135296200 ) ) ; +#2906 = CARTESIAN_POINT ( 'NONE', ( 21.84798024378700600, 0.9186612543713387200, -28.26517193348475500 ) ) ; +#2907 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890700900, 0.2588190451025143600 ) ) ; +#2908 = ORIENTED_EDGE ( 'NONE', *, *, #1802, .F. ) ; +#2909 = ORIENTED_EDGE ( 'NONE', *, *, #2394, .F. ) ; +#2910 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2911 = CARTESIAN_POINT ( 'NONE', ( 14.03206594834019500, 15.33161127372917300, -61.94580249020250300 ) ) ; +#2912 = ADVANCED_FACE ( 'NONE', ( #3351 ), #1909, .T. ) ; +#2913 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000002000, 1.436033790803491000, -25.37970353119716900 ) ) ; +#2914 = ORIENTED_EDGE ( 'NONE', *, *, #1927, .F. ) ; +#2915 = ORIENTED_EDGE ( 'NONE', *, *, #1751, .F. ) ; +#2916 = EDGE_CURVE ( 'NONE', #3658, #381, #1028, .T. ) ; +#2917 = CARTESIAN_POINT ( 'NONE', ( 21.51120742537042600, 0.5608662852053160100, -27.54490920069271800 ) ) ; +#2918 = ORIENTED_EDGE ( 'NONE', *, *, #109, .T. ) ; +#2919 = ORIENTED_EDGE ( 'NONE', *, *, #168, .T. ) ; +#2920 = CARTESIAN_POINT ( 'NONE', ( -0.2545056748788042100, -9.999999999999996400, 17.42727761131465400 ) ) ; +#2921 = CARTESIAN_POINT ( 'NONE', ( 14.85059067416561100, 14.37576827090108000, -66.24300729108645700 ) ) ; +#2922 = DIRECTION ( 'NONE', ( 0.9354143466934854400, -1.226634733346699600E-016, -0.3535533905932739000 ) ) ; +#2923 = ORIENTED_EDGE ( 'NONE', *, *, #253, .T. ) ; +#2924 = CARTESIAN_POINT ( 'NONE', ( 5.201887282159042100, 0.2952484969653225200, 20.25268728215880300 ) ) ; +#2925 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 10.00000000000000200, 12.51759777210976300 ) ) ; +#2926 = CARTESIAN_POINT ( 'NONE', ( 13.36562006115326900, 10.63200273735239400, -63.37817426752878400 ) ) ; +#2927 = ORIENTED_EDGE ( 'NONE', *, *, #339, .T. ) ; +#2928 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 27.50000000000000400 ) ) ; +#2929 = LINE ( 'NONE', #1771, #2315 ) ; +#2930 = CARTESIAN_POINT ( 'NONE', ( 21.31793301627636000, 0.3860703549681884200, -27.19847645210641600 ) ) ; +#2931 = VECTOR ( 'NONE', #3195, 1000.000000000000100 ) ; +#2933 = CARTESIAN_POINT ( 'NONE', ( 14.25024300564899700, 15.26628455736858700, -61.91092052998893500 ) ) ; +#2932 = TOROIDAL_SURFACE ( 'NONE', #3300, 10.00000000000000400, 2.500000000000000000 ) ; +#2934 = CARTESIAN_POINT ( 'NONE', ( 14.19328436165105800, 8.482653894112825600, 18.83990488805904900 ) ) ; +#2935 = CARTESIAN_POINT ( 'NONE', ( 20.88289981040696500, 0.04521814161029907900, -26.53191570071355100 ) ) ; +#2936 = CARTESIAN_POINT ( 'NONE', ( 6.224600000000037900, -3.354751084655891000, 20.42893218813456700 ) ) ; +#2937 = FACE_OUTER_BOUND ( 'NONE', #2235, .T. ) ; +#2938 = AXIS2_PLACEMENT_3D ( 'NONE', #807, #504, #489 ) ; +#2939 = CARTESIAN_POINT ( 'NONE', ( 15.42313544999015900, 14.11614427144098500, -66.03307317313039000 ) ) ; +#2940 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890700900, 0.2588190451025143600 ) ) ; +#2941 = CARTESIAN_POINT ( 'NONE', ( 16.30542016100295700, -6.225936000115802400, 20.18752835263137900 ) ) ; +#2942 = CARTESIAN_POINT ( 'NONE', ( 20.64114116372197200, -0.1208406724934874100, -26.21178889141067700 ) ) ; +#2943 = CARTESIAN_POINT ( 'NONE', ( 13.79382192458332100, 10.86424561741070800, -63.25059173027954500 ) ) ; +#2944 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000100, 10.00000000000000200, 14.27124344467704900 ) ) ; +#2945 = CARTESIAN_POINT ( 'NONE', ( 5.330649421260024400, 1.170996924159391200, 20.29182622161481200 ) ) ; +#2946 = AXIS2_PLACEMENT_3D ( 'NONE', #357, #333, #304 ) ; +#2947 = CARTESIAN_POINT ( 'NONE', ( 14.67965158746782700, 15.12298878200880600, -61.82527049330913400 ) ) ; +#2948 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000100, -9.999999999999998200, 14.27124344467705100 ) ) ; +#2949 = ORIENTED_EDGE ( 'NONE', *, *, #1527, .F. ) ; +#2950 = VERTEX_POINT ( 'NONE', #3786 ) ; +#2951 = CARTESIAN_POINT ( 'NONE', ( 5.406717340414069800, 1.460649558255744400, 20.31365538043751700 ) ) ; +#2952 = DIRECTION ( 'NONE', ( 1.325001034533938600E-016, -1.588080900582084500E-016, -1.000000000000000000 ) ) ; +#2953 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #626, #54, #1785 ), + ( #3611, #1477, #3308 ), + ( #1186, #3021, #893 ), + ( #2721, #609, #2413 ), + ( #316, #2090, #40 ), + ( #1769, #3596, #1460 ), + ( #3297, #1171, #3006 ), + ( #202, #3759, #3789 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001924698808057211500, 0.003849397616114423000, 0.007698795232228846000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8164965809277260300, 1.000000000000000000), + ( 1.000000000000000000, 0.8041240654838359700, 1.000000000000000000), + ( 1.000000000000000000, 0.7926702635784352900, 1.000000000000000000), + ( 1.000000000000000000, 0.7719025772521264100, 1.000000000000000000), + ( 1.000000000000000000, 0.7625754468079514200, 1.000000000000000000), + ( 1.000000000000000000, 0.7373423233570557400, 1.000000000000000000), + ( 1.000000000000000000, 0.7241342231881083800, 1.000000000000000000), + ( 1.000000000000000000, 0.7130631886949770900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2954 = ORIENTED_EDGE ( 'NONE', *, *, #85, .F. ) ; +#2955 = CARTESIAN_POINT ( 'NONE', ( 15.70477646203737100, 13.97429252708278800, -65.90961197034454200 ) ) ; +#2956 = ORIENTED_EDGE ( 'NONE', *, *, #2325, .F. ) ; +#2957 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2118, #2100, #1580 ), + ( #1554, #1538, #1529 ), + ( #1515, #1509, #1497 ), + ( #1491, #1485, #1481 ), + ( #1466, #1451, #1438 ), + ( #1415, #1405, #1395 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.003051067943565613000, 0.006102135887131226000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8164965809277260300, 1.000000000000000000), + ( 1.000000000000000000, 0.8021346805479256900, 1.000000000000000000), + ( 1.000000000000000000, 0.7862227654681242000, 1.000000000000000000), + ( 1.000000000000000000, 0.7563599117502652900, 1.000000000000000000), + ( 1.000000000000000000, 0.7423321108457751100, 1.000000000000000000), + ( 1.000000000000000000, 0.7298355860922887100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2958 = CARTESIAN_POINT ( 'NONE', ( 20.10782258966145300, -0.4430787097895826900, -25.59809492444444200 ) ) ; +#2959 = ORIENTED_EDGE ( 'NONE', *, *, #164, .F. ) ; +#2960 = ORIENTED_EDGE ( 'NONE', *, *, #2653, .F. ) ; +#2961 = CARTESIAN_POINT ( 'NONE', ( 14.02937266801814300, 10.96974120476224500, -63.17390716769332200 ) ) ; +#2962 = CARTESIAN_POINT ( 'NONE', ( 16.53256471042392300, -10.00000000000029500, 17.44519991596117900 ) ) ; +#2963 = CARTESIAN_POINT ( 'NONE', ( 14.74341813383390100, -7.936596969539027500, 19.24518683207134700 ) ) ; +#2964 = ORIENTED_EDGE ( 'NONE', *, *, #774, .T. ) ; +#2965 = CARTESIAN_POINT ( 'NONE', ( 3.333333333333329500, -4.913000608485467600, 18.24465176069333000 ) ) ; +#2966 = EDGE_LOOP ( 'NONE', ( #2672, #1135, #372, #1952, #3555 ) ) ; +#2967 = CARTESIAN_POINT ( 'NONE', ( 6.274893730624883800, -6.945078274142959500, 18.76169400471151900 ) ) ; +#2968 = ORIENTED_EDGE ( 'NONE', *, *, #854, .T. ) ; +#2969 = CARTESIAN_POINT ( 'NONE', ( 14.89088234650658500, 15.04501966200110800, -61.77449952899701200 ) ) ; +#2970 = CARTESIAN_POINT ( 'NONE', ( 19.81757267003288800, -0.5981575412079442900, -25.30666441898108900 ) ) ; +#2971 = EDGE_LOOP ( 'NONE', ( #3366, #3385 ) ) ; +#2972 = LINE ( 'NONE', #541, #2064 ) ; +#2973 = CARTESIAN_POINT ( 'NONE', ( 17.40998370824614800, 11.47788851493753100, -22.67481328856048600 ) ) ; +#2974 = CARTESIAN_POINT ( 'NONE', ( 16.26015305824838500, 13.67851662341695400, -65.62188976154308800 ) ) ; +#2975 = CARTESIAN_POINT ( 'NONE', ( 24.86344176184014600, -9.953839850033316900, 13.27376668149447000 ) ) ; +#2976 = AXIS2_PLACEMENT_3D ( 'NONE', #2120, #2086, #2077 ) ; +#2977 = CARTESIAN_POINT ( 'NONE', ( 16.30542016100148600, 6.225936000117441100, 20.18752835263077100 ) ) ; +#2978 = CARTESIAN_POINT ( 'NONE', ( 19.20389738300101400, -0.8886796540685816300, -24.76634972807261900 ) ) ; +#2979 = CYLINDRICAL_SURFACE ( 'NONE', #2075, 4.999999999999997300 ) ; +#2980 = AXIS2_PLACEMENT_3D ( 'NONE', #2738, #2735, #2716 ) ; +#2981 = CARTESIAN_POINT ( 'NONE', ( 14.52986468876757100, 11.15039627627847600, -62.98686549832386600 ) ) ; +#2982 = ADVANCED_FACE ( 'NONE', ( #2571 ), #2097, .T. ) ; +#2983 = CARTESIAN_POINT ( 'NONE', ( 17.40998370824614800, 13.89270308066020800, -22.02776567580419700 ) ) ; +#2984 = EDGE_CURVE ( 'NONE', #3279, #2047, #1193, .T. ) ; +#2985 = CARTESIAN_POINT ( 'NONE', ( 15.30741479370772700, 14.88356615214818200, -61.65489224818303200 ) ) ; +#2986 = DIRECTION ( 'NONE', ( -0.9797467198165996600, -6.947247208029996200E-017, -0.2002407675989414900 ) ) ; +#2987 = PLANE ( 'NONE', #3826 ) ; +#2988 = CARTESIAN_POINT ( 'NONE', ( 7.135261033227038800, -10.00000000000029800, 17.50071602367422600 ) ) ; +#2989 = CARTESIAN_POINT ( 'NONE', ( 16.53388512591277100, 13.52455605822843800, -65.45764440000783700 ) ) ; +#2990 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000600, -5.997907696802582400, 13.20722971111320000 ) ) ; +#2991 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -4.014749828072296200, 13.61697764103997500 ) ) ; +#2992 = VERTEX_POINT ( 'NONE', #47 ) ; +#2993 = EDGE_CURVE ( 'NONE', #2192, #3374, #2467, .T. ) ; +#2994 = CARTESIAN_POINT ( 'NONE', ( 19.06357827766153400, 13.40741737109299300, -20.21665475151220500 ) ) ; +#2995 = CARTESIAN_POINT ( 'NONE', ( 14.79163632025436600, 11.22691289846959800, -62.87900720517833300 ) ) ; +#2996 = CARTESIAN_POINT ( 'NONE', ( 13.49313651056205600, -4.999999999999998200, 15.32111431373023800 ) ) ; +#2997 = ORIENTED_EDGE ( 'NONE', *, *, #655, .F. ) ; +#2998 = VERTEX_POINT ( 'NONE', #83 ) ; +#2999 = ADVANCED_FACE ( 'NONE', ( #1621 ), #99, .T. ) ; +#3000 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.298510400299580000E-032, -1.325001034533938600E-016 ) ) ; +#3001 = AXIS2_PLACEMENT_3D ( 'NONE', #3507, #3429, #3460 ) ; +#3002 = CARTESIAN_POINT ( 'NONE', ( 4.949199999999994000, -11.59115779176003800, -61.56645032909982300 ) ) ; +#3003 = ORIENTED_EDGE ( 'NONE', *, *, #164, .T. ) ; +#3004 = EDGE_LOOP ( 'NONE', ( #512, #556, #600, #697 ) ) ; +#3005 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2643, #2648, #2612, #2602, #2597, #2586, #2580, #2572 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001770824009146271900, 0.002656236013719405600, 0.003541648018292539900 ), + .UNSPECIFIED. ) ; +#3006 = CARTESIAN_POINT ( 'NONE', ( 0.6769738009565871000, 5.242566062034212500, 17.54727368663202800 ) ) ; +#3007 = ORIENTED_EDGE ( 'NONE', *, *, #882, .F. ) ; +#3008 = AXIS2_PLACEMENT_3D ( 'NONE', #2849, #2844, #2838 ) ; +#3009 = CARTESIAN_POINT ( 'NONE', ( 18.87874424775983300, -1.025202553298972600, -24.51540965738359300 ) ) ; +#3010 = CARTESIAN_POINT ( 'NONE', ( 24.89839999999999900, -4.688437913382177400, 17.08773323077998500 ) ) ; +#3011 = CARTESIAN_POINT ( 'NONE', ( 17.06843152253625800, 11.39992685758248900, -22.38385642104600800 ) ) ; +#3012 = CARTESIAN_POINT ( 'NONE', ( 15.51271384434059400, 14.80005999518558600, -61.58606438087999600 ) ) ; +#3013 = ORIENTED_EDGE ( 'NONE', *, *, #889, .T. ) ; +#3014 = CARTESIAN_POINT ( 'NONE', ( 8.984760003051507100, -8.019058510556373400, 18.89334427247216700 ) ) ; +#3015 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2853, #3449, #2553, #447 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.002430971657955141400, 0.003512578817433823500 ), + .UNSPECIFIED. ) ; +#3016 = EDGE_LOOP ( 'NONE', ( #3003, #3056, #3101, #3190, #3227 ) ) ; +#3017 = CARTESIAN_POINT ( 'NONE', ( 17.07443022961092200, 13.21577702381974200, -65.08287420468813900 ) ) ; +#3018 = CARTESIAN_POINT ( 'NONE', ( 18.19180150345606300, -1.279817133234936000, -24.05145329001647200 ) ) ; +#3019 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -9.999999999999998200, 12.51759777210976000 ) ) ; +#3021 = CARTESIAN_POINT ( 'NONE', ( 4.945400490487561000, 10.00000000000055600, 17.44481467049734400 ) ) ; +#3020 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#3022 = CARTESIAN_POINT ( 'NONE', ( 21.78806554423609000, -4.057416217262390200, 18.33041072749069800 ) ) ; +#3023 = FACE_OUTER_BOUND ( 'NONE', #3692, .T. ) ; +#3024 = CARTESIAN_POINT ( 'NONE', ( 15.32709823155271800, 11.35470363728620500, -62.62633499652062600 ) ) ; +#3025 = CARTESIAN_POINT ( 'NONE', ( 24.94501581392127000, -9.999999999999998200, 12.51556264434846200 ) ) ; +#3026 = AXIS2_PLACEMENT_3D ( 'NONE', #1160, #1457, #3295 ) ; +#3027 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -2.683075916540764700, 13.83696731726268100 ) ) ; +#3028 = FACE_OUTER_BOUND ( 'NONE', #1741, .T. ) ; +#3029 = CARTESIAN_POINT ( 'NONE', ( 17.07380716030557700, 13.80888281988225500, -21.74328672287924000 ) ) ; +#3030 = CARTESIAN_POINT ( 'NONE', ( 15.91812267230217500, 14.63426014622761400, -61.42744227598490900 ) ) ; +#3031 = CARTESIAN_POINT ( 'NONE', ( 18.60474443775065400, 13.30523980087244600, -19.83532286805516500 ) ) ; +#3032 = EDGE_CURVE ( 'NONE', #2503, #2881, #846, .T. ) ; +#3033 = CARTESIAN_POINT ( 'NONE', ( 21.56506666666667000, 4.913000608485470300, 18.24465176069333000 ) ) ; +#3034 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2874, #2834, #2804 ), + ( #2789, #2771, #2761 ), + ( #2756, #2745, #2740 ), + ( #2730, #2724, #2709 ), + ( #2699, #2685, #2667 ), + ( #2659, #2649, #2636 ), + ( #2625, #2618, #2603 ), + ( #2587, #2576, #2564 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( -2.963775058706374900E-015, 0.002046501110070351800, 0.003069751665107009300, 0.004093002220143667300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9198317473328327900, 1.000000000000000000), + ( 1.000000000000000000, 0.9099784173012313000, 1.000000000000000000), + ( 1.000000000000000000, 0.8987980930244394700, 1.000000000000000000), + ( 1.000000000000000000, 0.8759986957841904300, 1.000000000000000000), + ( 1.000000000000000000, 0.8674092759744106400, 1.000000000000000000), + ( 1.000000000000000000, 0.8461836458336621200, 1.000000000000000000), + ( 1.000000000000000000, 0.8335262052137474300, 1.000000000000000000), + ( 1.000000000000000000, 0.8164965809277263700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3035 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000100, -1.505759517047178300, -23.64527242200713200 ) ) ; +#3036 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -3.079871357013235700, 17.05707133485579200 ) ) ; +#3037 = CARTESIAN_POINT ( 'NONE', ( 18.60818007615354500, 13.30600488225603500, -19.83817819065065900 ) ) ; +#3038 = CARTESIAN_POINT ( 'NONE', ( 17.34005347613599200, 13.06163207313489100, -64.87291758736792200 ) ) ; +#3039 = CARTESIAN_POINT ( 'NONE', ( 20.27369416262586600, -6.282183226029175700, 18.38011863062102300 ) ) ; +#3040 = CARTESIAN_POINT ( 'NONE', ( 21.93802629987772700, -3.236100987591640000, 18.37193800720307400 ) ) ; +#3041 = CARTESIAN_POINT ( 'NONE', ( 16.69822191497031500, 11.33220780666785300, -22.12198084941525200 ) ) ; +#3042 = CARTESIAN_POINT ( 'NONE', ( 15.59869778355559300, 11.40702297543240500, -62.48407121623598200 ) ) ; +#3043 = ORIENTED_EDGE ( 'NONE', *, *, #1072, .T. ) ; +#3044 = CARTESIAN_POINT ( 'NONE', ( 17.82900440527127700, -1.398195503357781300, -23.83792930960774500 ) ) ; +#3045 = CARTESIAN_POINT ( 'NONE', ( 12.44919999999999800, 10.24015223986378800, -55.71676843641291300 ) ) ; +#3046 = CARTESIAN_POINT ( 'NONE', ( 16.11734010709594100, 14.55233731295516200, -61.33788094586309100 ) ) ; +#3047 = ORIENTED_EDGE ( 'NONE', *, *, #1079, .T. ) ; +#3048 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000100, 1.758564121058934400, -25.31515713847477400 ) ) ; +#3049 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -1.342671211746353700, 13.95898618023644600 ) ) ; +#3050 = EDGE_CURVE ( 'NONE', #2543, #3369, #527, .T. ) ; +#3051 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025144700, -0.9659258262890700900 ) ) ; +#3052 = EDGE_LOOP ( 'NONE', ( #2731, #2785, #2870 ) ) ; +#3053 = CARTESIAN_POINT ( 'NONE', ( 18.11316220817163700, 12.62365785718430200, -64.17796273553328500 ) ) ; +#3054 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025133000, -0.9659258262890703100 ) ) ; +#3055 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -1.530523879360822000, 17.04164914387503400 ) ) ; +#3056 = ORIENTED_EDGE ( 'NONE', *, *, #200, .T. ) ; +#3057 = ORIENTED_EDGE ( 'NONE', *, *, #1326, .T. ) ; +#3058 = CARTESIAN_POINT ( 'NONE', ( 16.70767589553161500, 13.73414098446368900, -21.48523546690906000 ) ) ; +#3059 = CARTESIAN_POINT ( 'NONE', ( 16.37814632771490500, 11.53763223815358600, -62.01864571222901600 ) ) ; +#3060 = CARTESIAN_POINT ( 'NONE', ( 5.942503415808992000, 2.831332698717524500, 20.42893218813457100 ) ) ; +#3061 = CARTESIAN_POINT ( 'NONE', ( 13.64382874642173800, 12.81714827687040900, -17.90388636120895400 ) ) ; +#3062 = CARTESIAN_POINT ( 'NONE', ( 12.08697791844101300, 23.47221089945068000, -64.30888758317469500 ) ) ; +#3063 = ADVANCED_FACE ( 'NONE', ( #2361 ), #3080, .F. ) ; +#3064 = AXIS2_PLACEMENT_3D ( 'NONE', #3598, #3584, #3571 ) ; +#3065 = ORIENTED_EDGE ( 'NONE', *, *, #1631, .T. ) ; +#3066 = CARTESIAN_POINT ( 'NONE', ( 17.64771989064334400, 1.859341020080242300, -25.47197933252935800 ) ) ; +#3067 = EDGE_LOOP ( 'NONE', ( #2964, #2968, #3007, #3013, #3043, #3047, #3057, #3065 ) ) ; +#3068 = CARTESIAN_POINT ( 'NONE', ( 16.69717165614082800, 14.32320817860296500, -61.03876167593139700 ) ) ; +#3069 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -9.999999999999998200, 14.27124344467705400 ) ) ; +#3070 = ORIENTED_EDGE ( 'NONE', *, *, #365, .T. ) ; +#3071 = VECTOR ( 'NONE', #1159, 999.9999999999998900 ) ; +#3072 = CARTESIAN_POINT ( 'NONE', ( 22.13911450136032900, -1.608965788909262100, 18.42442647754033700 ) ) ; +#3073 = CARTESIAN_POINT ( 'NONE', ( 18.11456255316514000, 13.21717054447587900, -19.49772233475778500 ) ) ; +#3074 = CARTESIAN_POINT ( 'NONE', ( 17.83562128064877000, 1.964638427592643000, -25.63740436252660300 ) ) ; +#3075 = CARTESIAN_POINT ( 'NONE', ( 6.293685444701501400, 13.30523314635812500, -19.83529803306965200 ) ) ; +#3076 = LINE ( 'NONE', #840, #2654 ) ; +#3077 = CARTESIAN_POINT ( 'NONE', ( 21.33204879236371100, 6.013062097049531700, 18.11504713615423900 ) ) ; +#3078 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1905477654108793700, 0.9816779253385096200 ) ) ; +#3079 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #263, #545, #515, #2036, #3819, #3083, #1276, #1295, #1890, #2066, #11, #1732, #3568, #1432, #852, #2975, #1143, #3264 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( -1.425673530052928800E-005, 0.0004949102456622370700, 0.001004077226625003400, 0.002022411188550544500, 0.004059079112401632400, 0.005077413074327179200, 0.006095747036252721600, 0.007114080998178264100, 0.008132414960103808200 ), + .UNSPECIFIED. ) ; +#3080 = CYLINDRICAL_SURFACE ( 'NONE', #2102, 7.499999999999995600 ) ; +#3081 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 27.50000000000000400 ) ) ; +#3082 = CARTESIAN_POINT ( 'NONE', ( 18.60158378168160500, 12.35950064796972300, -63.62628437440470500 ) ) ; +#3083 = CARTESIAN_POINT ( 'NONE', ( 22.15079265171906500, -6.911657387100488500, 17.59069596971669500 ) ) ; +#3084 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -0.6698008398190729000, 13.98921998022568000 ) ) ; +#3085 = CARTESIAN_POINT ( 'NONE', ( 15.92527162694798400, 11.21826796053220000, -21.67173249728200800 ) ) ; +#3086 = CARTESIAN_POINT ( 'NONE', ( 16.90319479910493100, 11.59931458848191200, -61.63872284040186100 ) ) ; +#3087 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000000300, -1.505759517047178300, -23.64527242200713200 ) ) ; +#3088 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#3089 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 20.42893218813456700 ) ) ; +#3090 = CARTESIAN_POINT ( 'NONE', ( 24.73498921925273900, 9.811804430347054400, 13.92610543845969300 ) ) ; +#3091 = CARTESIAN_POINT ( 'NONE', ( 18.19066263600859700, 2.183569119956339400, -25.98539268891415000 ) ) ; +#3092 = CARTESIAN_POINT ( 'NONE', ( 17.06341141697842500, 14.18993147595804200, -60.79828692105565600 ) ) ; +#3093 = VERTEX_POINT ( 'NONE', #3466 ) ; +#3094 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -0.7611365047981921700, 17.03777201840308900 ) ) ; +#3095 = CARTESIAN_POINT ( 'NONE', ( 15.93980301257158400, 13.60653664409390600, -21.03986895863798200 ) ) ; +#3096 = CARTESIAN_POINT ( 'NONE', ( 19.06357827766150900, 12.18129507813263700, -62.96121213358091500 ) ) ; +#3097 = CARTESIAN_POINT ( 'NONE', ( 18.35816896762726100, 2.297559886860622000, -26.16855165817070300 ) ) ; +#3098 = ORIENTED_EDGE ( 'NONE', *, *, #346, .F. ) ; +#3099 = ORIENTED_EDGE ( 'NONE', *, *, #3530, .F. ) ; +#3100 = CARTESIAN_POINT ( 'NONE', ( 24.89839999999999900, -6.709502169311824600, 27.50000000000000400 ) ) ; +#3101 = ORIENTED_EDGE ( 'NONE', *, *, #245, .T. ) ; +#3102 = ORIENTED_EDGE ( 'NONE', *, *, #1808, .T. ) ; +#3103 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3104 = DIRECTION ( 'NONE', ( 0.3535533905932738400, 0.0000000000000000000, 0.9354143466934852200 ) ) ; +#3105 = ORIENTED_EDGE ( 'NONE', *, *, #115, .T. ) ; +#3106 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3107 = CARTESIAN_POINT ( 'NONE', ( 22.18840522797144700, -0.8029846417334568500, 18.43401204955234400 ) ) ; +#3108 = CARTESIAN_POINT ( 'NONE', ( 17.08396216939259200, 13.06692204091751600, -18.91257844827723400 ) ) ; +#3109 = ORIENTED_EDGE ( 'NONE', *, *, #1706, .T. ) ; +#3110 = EDGE_CURVE ( 'NONE', #923, #509, #2270, .T. ) ; +#3111 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3112 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.999423642752454100, 12.59359090277176900 ) ) ; +#3113 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -20.25401967945300200, -29.23620962527678900 ) ) ; +#3114 = EDGE_CURVE ( 'NONE', #1842, #999, #1430, .T. ) ; +#3115 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -8.988372880617697900, 12.68459017141276100 ) ) ; +#3116 = CIRCLE ( 'NONE', #2976, 100.0000000000000000 ) ; +#3117 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.838808320239663900E-032, 1.060000827627150900E-016 ) ) ; +#3118 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -7.987988261658155200, 12.83796693380418800 ) ) ; +#3119 = TOROIDAL_SURFACE ( 'NONE', #2384, 9.999999999999996400, 2.500000000000000000 ) ; +#3120 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 0.6810963844221588100, 13.98887867492514500 ) ) ; +#3121 = CARTESIAN_POINT ( 'NONE', ( 15.52090986178905900, 11.17152652181191800, -21.48144756899940700 ) ) ; +#3122 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -9.184850993605144000E-016, 7.500000000000000000 ) ) ; +#3123 = CARTESIAN_POINT ( 'NONE', ( 18.82209589241054500, 2.645695189747996800, -26.73507087748801000 ) ) ; +#3124 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000004700, -9.999999999999998200, 14.27124344467705400 ) ) ; +#3125 = FACE_OUTER_BOUND ( 'NONE', #860, .T. ) ; +#3126 = CARTESIAN_POINT ( 'NONE', ( 19.94920000000000100, 10.18853926298077200, -45.86488792146470000 ) ) ; +#3127 = AXIS2_PLACEMENT_3D ( 'NONE', #3081, #3103, #3106 ) ; +#3128 = CARTESIAN_POINT ( 'NONE', ( 19.08308246386929200, 2.887358350529099800, -27.13754562326553100 ) ) ; +#3129 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #816, #880, #772, #767, #764, #759, #752, #747 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.003541648018292539900, 0.004428192120944868800, 0.005314736223597197600, 0.007087824428901851000 ), + .UNSPECIFIED. ) ; +#3130 = CARTESIAN_POINT ( 'NONE', ( 19.40336117166251000, 3.261476101247989600, -27.77929518887533400 ) ) ; +#3131 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 0.7740020198894911300, 17.03781554595477800 ) ) ; +#3132 = CARTESIAN_POINT ( 'NONE', ( 17.40998370824612700, 14.11082393428809900, -60.50305359653262400 ) ) ; +#3133 = CARTESIAN_POINT ( 'NONE', ( 19.49857075503388500, 3.388847589814005400, -28.00084746837015700 ) ) ; +#3134 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#3135 = VERTEX_POINT ( 'NONE', #3493 ) ; +#3136 = CARTESIAN_POINT ( 'NONE', ( 19.66172868958208400, 3.643661320367503000, -28.45093187091765300 ) ) ; +#3137 = ORIENTED_EDGE ( 'NONE', *, *, #466, .T. ) ; +#3138 = ORIENTED_EDGE ( 'NONE', *, *, #1158, .T. ) ; +#3139 = DIRECTION ( 'NONE', ( 0.2002407675990546000, 0.0000000000000000000, 0.9797467198165765700 ) ) ; +#3140 = CARTESIAN_POINT ( 'NONE', ( 9.154225313153075300, -8.775155475126014800, 18.36403316466262900 ) ) ; +#3141 = CARTESIAN_POINT ( 'NONE', ( 22.18784612100953200, 0.8165262018355954300, 18.43389089465516800 ) ) ; +#3142 = VERTEX_POINT ( 'NONE', #3333 ) ; +#3143 = CARTESIAN_POINT ( 'NONE', ( 15.53645723300103000, 13.55304400688731200, -20.85044778998626600 ) ) ; +#3144 = DIRECTION ( 'NONE', ( -0.9797467198165765700, 1.488619496307868000E-016, 0.2002407675990547100 ) ) ; +#3145 = CARTESIAN_POINT ( 'NONE', ( 19.72961914753602000, 3.770735242555963900, -28.67877291308313300 ) ) ; +#3146 = AXIS2_PLACEMENT_3D ( 'NONE', #3549, #3752, #3535 ) ; +#3147 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.298510400299580000E-032, -1.325001034533938600E-016 ) ) ; +#3148 = VERTEX_POINT ( 'NONE', #3328 ) ; +#3149 = ORIENTED_EDGE ( 'NONE', *, *, #1208, .F. ) ; +#3150 = CARTESIAN_POINT ( 'NONE', ( 19.89317784671423400, 4.150628690663881800, -29.37068897333182300 ) ) ; +#3151 = ORIENTED_EDGE ( 'NONE', *, *, #602, .F. ) ; +#3152 = AXIS2_PLACEMENT_3D ( 'NONE', #2812, #2479, #2708 ) ; +#3153 = CARTESIAN_POINT ( 'NONE', ( 13.49313651055453400, 5.000000000000002700, 15.32111431373170700 ) ) ; +#3154 = EDGE_LOOP ( 'NONE', ( #3431, #3437, #3473, #3476 ) ) ; +#3155 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3156 = ORIENTED_EDGE ( 'NONE', *, *, #943, .F. ) ; +#3157 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3158 = ADVANCED_FACE ( 'NONE', ( #1348 ), #2979, .F. ) ; +#3159 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 1.357482276318814800, 13.95806672418012600 ) ) ; +#3160 = CARTESIAN_POINT ( 'NONE', ( 16.54481314915512200, 13.00483207941254600, -18.66539848092870100 ) ) ; +#3161 = AXIS2_PLACEMENT_3D ( 'NONE', #2676, #3354, #3779 ) ; +#3162 = ORIENTED_EDGE ( 'NONE', *, *, #2916, .F. ) ; +#3163 = CARTESIAN_POINT ( 'NONE', ( 4.313649639484577100, 6.178701288272034000, 18.29526054258716500 ) ) ; +#3164 = TOROIDAL_SURFACE ( 'NONE', #1089, 102.5000000000000100, 2.500000000000000000 ) ; +#3165 = VECTOR ( 'NONE', #895, 1000.000000000000100 ) ; +#3166 = ADVANCED_FACE ( 'NONE', ( #1528 ), #3714, .T. ) ; +#3168 = CARTESIAN_POINT ( 'NONE', ( -3.811648262644350000E-018, 9.994186853177241800, 12.93880982189507400 ) ) ; +#3167 = FACE_OUTER_BOUND ( 'NONE', #390, .T. ) ; +#3169 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 1.547466779938488200, 17.04176426512343000 ) ) ; +#3170 = AXIS2_PLACEMENT_3D ( 'NONE', #101, #91, #86 ) ; +#3171 = CARTESIAN_POINT ( 'NONE', ( 14.88743087049690000, 11.11519415353330900, -21.24890435522961600 ) ) ; +#3172 = CARTESIAN_POINT ( 'NONE', ( 17.40998370824613400, 11.69600936856542500, -61.15010120928890600 ) ) ; +#3173 = DIRECTION ( 'NONE', ( 0.8802913740347569900, 0.4744334482306233300, 1.040834085586084300E-015 ) ) ; +#3174 = AXIS2_PLACEMENT_3D ( 'NONE', #176, #169, #161 ) ; +#3175 = CARTESIAN_POINT ( 'NONE', ( 15.71706157022349800, 8.076069838901931400, 18.89202875594782700 ) ) ; +#3176 = AXIS2_PLACEMENT_3D ( 'NONE', #216, #210, #194 ) ; +#3177 = CARTESIAN_POINT ( 'NONE', ( 7.999682225055128300, -7.031060253165135200, 19.19470945590399300 ) ) ; +#3178 = CARTESIAN_POINT ( 'NONE', ( 22.13761217965210900, 1.626782442731153700, 18.42409398733417400 ) ) ; +#3179 = ADVANCED_FACE ( 'NONE', ( #1255 ), #3310, .F. ) ; +#3180 = CARTESIAN_POINT ( 'NONE', ( 1.577302506127171900E-014, -6.709502169311813100, 27.50000000000002100 ) ) ; +#3181 = ORIENTED_EDGE ( 'NONE', *, *, #1500, .F. ) ; +#3182 = AXIS2_PLACEMENT_3D ( 'NONE', #324, #344, #286 ) ; +#3183 = VERTEX_POINT ( 'NONE', #2925 ) ; +#3184 = EDGE_LOOP ( 'NONE', ( #3506, #3518 ) ) ; +#3185 = CARTESIAN_POINT ( 'NONE', ( 22.20817733806333300, -0.4382712329823297800, 18.42368678958461800 ) ) ; +#3186 = VERTEX_POINT ( 'NONE', #2862 ) ; +#3187 = ORIENTED_EDGE ( 'NONE', *, *, #1935, .T. ) ; +#3188 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 2.696109429634945300, 13.83534303120450200 ) ) ; +#3189 = CARTESIAN_POINT ( 'NONE', ( 14.90207786442677200, 13.48795164088992700, -20.61832846191191800 ) ) ; +#3190 = ORIENTED_EDGE ( 'NONE', *, *, #268, .F. ) ; +#3191 = ORIENTED_EDGE ( 'NONE', *, *, #1674, .T. ) ; +#3192 = CARTESIAN_POINT ( 'NONE', ( 4.949199999999994000, 19.65546469306329800, -53.19394306809147800 ) ) ; +#3193 = VERTEX_POINT ( 'NONE', #2889 ) ; +#3194 = VERTEX_POINT ( 'NONE', #2936 ) ; +#3195 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9659258262890699800, 0.2588190451025143000 ) ) ; +#3196 = ORIENTED_EDGE ( 'NONE', *, *, #2542, .F. ) ; +#3197 = ADVANCED_FACE ( 'NONE', ( #2169 ), #3034, .T. ) ; +#3198 = CARTESIAN_POINT ( 'NONE', ( 16.89871777494481400, 7.031060253167027900, 19.19470945590318300 ) ) ; +#3199 = CARTESIAN_POINT ( 'NONE', ( 24.89839999999999500, 3.095172155328861100, 17.05727907177333300 ) ) ; +#3200 = FACE_OUTER_BOUND ( 'NONE', #3184, .T. ) ; +#3201 = CARTESIAN_POINT ( 'NONE', ( 15.70017449394434700, 12.92974054747971400, -18.36338921118058200 ) ) ; +#3202 = AXIS2_PLACEMENT_3D ( 'NONE', #1016, #942, #931 ) ; +#3203 = CARTESIAN_POINT ( 'NONE', ( 19.06357827766149500, 24.01142209705489700, -59.79133915250322000 ) ) ; +#3204 = CARTESIAN_POINT ( 'NONE', ( 3.568976306003018200, -5.960521729848155200, 18.11286642393776700 ) ) ; +#3205 = FACE_OUTER_BOUND ( 'NONE', #863, .T. ) ; +#3206 = CARTESIAN_POINT ( 'NONE', ( 12.44919999998348100, 11.02205614447055000, -20.85581036584213200 ) ) ; +#3207 = VECTOR ( 'NONE', #2835, 1000.000000000000000 ) ; +#3208 = CARTESIAN_POINT ( 'NONE', ( 17.40998370824611300, 23.52613638748769600, -57.98022822821119600 ) ) ; +#3209 = CARTESIAN_POINT ( 'NONE', ( 19.11586666666666900, 6.666666666666669600, 18.68082896311803200 ) ) ; +#3210 = CARTESIAN_POINT ( 'NONE', ( 12.22285325071772800, 11.02205614447067500, -20.85581036584261500 ) ) ; +#3211 = CARTESIAN_POINT ( 'NONE', ( 21.93533624050095600, 3.252088652401686500, 18.37117494372181200 ) ) ; +#3212 = AXIS2_PLACEMENT_3D ( 'NONE', #307, #300, #294 ) ; +#3213 = CARTESIAN_POINT ( 'NONE', ( 14.67077396574935700, 11.09867278487255500, -21.18000361856766000 ) ) ; +#3214 = CARTESIAN_POINT ( 'NONE', ( 17.40998370824612000, 21.11132182176500300, -58.62727584096748500 ) ) ; +#3215 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000800, -0.4184821099442274100, -24.85318660395788000 ) ) ; +#3216 = CARTESIAN_POINT ( 'NONE', ( 11.99429140246382300, 11.02441465720865000, -20.86592804654555900 ) ) ; +#3217 = ORIENTED_EDGE ( 'NONE', *, *, #2417, .F. ) ; +#3218 = CARTESIAN_POINT ( 'NONE', ( 18.60119335572904800, 24.18977826618714700, -60.45697343754815700 ) ) ; +#3219 = CARTESIAN_POINT ( 'NONE', ( 21.64932026715958100, 10.00000000000000200, 17.32032696884525100 ) ) ; +#3220 = AXIS2_PLACEMENT_3D ( 'NONE', #982, #975, #969 ) ; +#3221 = CARTESIAN_POINT ( 'NONE', ( 24.89839999999999900, -5.008381691144633900, 13.42410956663135500 ) ) ; +#3222 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 3.359198451034835400, 13.74422288552536900 ) ) ; +#3223 = ORIENTED_EDGE ( 'NONE', *, *, #1444, .F. ) ; +#3224 = VERTEX_POINT ( 'NONE', #2445 ) ; +#3225 = CARTESIAN_POINT ( 'NONE', ( 14.68486294355635000, 13.46872856747627300, -20.54943470860094500 ) ) ; +#3226 = CARTESIAN_POINT ( 'NONE', ( 16.90274539475953800, 23.85447824392344900, -58.35537195421952100 ) ) ; +#3227 = ORIENTED_EDGE ( 'NONE', *, *, #2217, .F. ) ; +#3228 = VERTEX_POINT ( 'NONE', #2850 ) ; +#3229 = CARTESIAN_POINT ( 'NONE', ( 5.815317536130707200, 2.887358350529097600, -27.13754562326553100 ) ) ; +#3230 = CARTESIAN_POINT ( 'NONE', ( 6.224600000000037900, 3.354751084655891000, 20.42893218813456700 ) ) ; +#3231 = VERTEX_POINT ( 'NONE', #2466 ) ; +#3232 = ORIENTED_EDGE ( 'NONE', *, *, #555, .F. ) ; +#3233 = CARTESIAN_POINT ( 'NONE', ( 17.06311655253406900, 21.19049664796586900, -58.92276035608101400 ) ) ; +#3234 = CARTESIAN_POINT ( 'NONE', ( 23.29218147118919200, 5.433907193222863100, 17.68057799747041200 ) ) ; +#3235 = EDGE_LOOP ( 'NONE', ( #3325, #3316, #239, #1784 ) ) ; +#3236 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3307, #1458, #3346, #353, #2141, #1217 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002046501110074849000, 0.004093002220149698000 ), + .UNSPECIFIED. ) ; +#3237 = CARTESIAN_POINT ( 'NONE', ( 7.166666053991556300, -7.870101936361756100, 18.55141497147187100 ) ) ; +#3238 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000454600, 3.882301489269413900, 17.06867772755393300 ) ) ; +#3239 = CARTESIAN_POINT ( 'NONE', ( 15.41129862093803600, 12.90766054351969100, -18.27392000326989700 ) ) ; +#3240 = ORIENTED_EDGE ( 'NONE', *, *, #30, .T. ) ; +#3241 = CARTESIAN_POINT ( 'NONE', ( 18.11308881116307700, 24.23660743783383600, -61.06621780332215400 ) ) ; +#3242 = EDGE_LOOP ( 'NONE', ( #1087, #1448, #1141, #1490 ) ) ; +#3243 = CARTESIAN_POINT ( 'NONE', ( 18.69920000000000500, -9.999999999999996400, 17.57843258350778700 ) ) ; +#3244 = AXIS2_PLACEMENT_3D ( 'NONE', #1517, #1349, #1206 ) ; +#3245 = CIRCLE ( 'NONE', #1602, 100.0000000000000000 ) ; +#3246 = CARTESIAN_POINT ( 'NONE', ( 11.54317276585135100, 11.03378180065445600, -20.90596702270211400 ) ) ; +#3247 = AXIS2_PLACEMENT_3D ( 'NONE', #1007, #1001, #992 ) ; +#3248 = FACE_OUTER_BOUND ( 'NONE', #1963, .T. ) ; +#3250 = CARTESIAN_POINT ( 'NONE', ( 16.37820216655008900, 24.09752278748461400, -58.65310366247948800 ) ) ; +#3249 = CIRCLE ( 'NONE', #3212, 5.000000000000000000 ) ; +#3251 = CARTESIAN_POINT ( 'NONE', ( 24.94501581392127000, 10.00000000000000200, 12.51556264434846200 ) ) ; +#3252 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9659258262890699800, 0.2588190451025143000 ) ) ; +#3253 = CARTESIAN_POINT ( 'NONE', ( 21.78532356528315700, 4.067936424199881900, 18.32935624114529100 ) ) ; +#3254 = CARTESIAN_POINT ( 'NONE', ( 14.23288446145092000, 11.07052886812161500, -21.06193542867341500 ) ) ; +#3255 = CYLINDRICAL_SURFACE ( 'NONE', #2205, 7.500000000000002700 ) ; +#3256 = CARTESIAN_POINT ( 'NONE', ( 16.69711660840038500, 21.19519332482349600, -59.19739019280365300 ) ) ; +#3257 = CARTESIAN_POINT ( 'NONE', ( 15.71706157023159800, -8.076069838899027100, 18.89202875594805100 ) ) ; +#3258 = CARTESIAN_POINT ( 'NONE', ( 10.05156497373621600, -9.137347922156912700, 18.16018509475861000 ) ) ; +#3259 = CARTESIAN_POINT ( 'NONE', ( 17.34157560389290600, 24.20498790799921100, -61.88553567249061200 ) ) ; +#3260 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 4.014749828072291700, 13.61697764103997300 ) ) ; +#3261 = AXIS2_PLACEMENT_3D ( 'NONE', #1254, #1244, #1231 ) ; +#3262 = CARTESIAN_POINT ( 'NONE', ( 14.24529062143079700, 13.43585275761051500, -20.43126375818858900 ) ) ; +#3263 = CARTESIAN_POINT ( 'NONE', ( 15.60029500202919700, 24.44269295272931300, -58.99034533403767000 ) ) ; +#3264 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -9.999423642752454100, 12.59359090277177100 ) ) ; +#3265 = ADVANCED_FACE ( 'NONE', ( #3167 ), #2333, .T. ) ; +#3266 = ORIENTED_EDGE ( 'NONE', *, *, #2078, .F. ) ; +#3267 = CARTESIAN_POINT ( 'NONE', ( 11.31983442139752100, 11.04077061190375100, -20.93580272098495200 ) ) ; +#3268 = ORIENTED_EDGE ( 'NONE', *, *, #706, .F. ) ; +#3269 = CARTESIAN_POINT ( 'NONE', ( 16.11848170290563700, 21.14649371969078800, -59.57030359580586100 ) ) ; +#3270 = ORIENTED_EDGE ( 'NONE', *, *, #2151, .T. ) ; +#3271 = AXIS2_PLACEMENT_3D ( 'NONE', #1305, #1284, #1273 ) ; +#3272 = CARTESIAN_POINT ( 'NONE', ( 10.65633670680193200, 11.06864045964320600, -21.05408180541158500 ) ) ; +#3273 = CARTESIAN_POINT ( 'NONE', ( 90.32016550602631400, -4.374999999999900500, -1.172277716886104300 ) ) ; +#3274 = CARTESIAN_POINT ( 'NONE', ( 14.82744594866233500, 12.86999092309946800, -18.12061929723422100 ) ) ; +#3275 = ORIENTED_EDGE ( 'NONE', *, *, #268, .T. ) ; +#3276 = ORIENTED_EDGE ( 'NONE', *, *, #1326, .F. ) ; +#3277 = CARTESIAN_POINT ( 'NONE', ( 17.07775563986151500, 24.17678636881090500, -62.14289124475476500 ) ) ; +#3278 = CARTESIAN_POINT ( 'NONE', ( 5.236671310417925400, 3.643661320367499500, -28.45093187091765300 ) ) ; +#3279 = VERTEX_POINT ( 'NONE', #2429 ) ; +#3280 = CARTESIAN_POINT ( 'NONE', ( 10.38196719803513600, -8.788189646937853500, 18.47554951505804900 ) ) ; +#3281 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890700900, 0.2588190451025145200 ) ) ; +#3282 = EDGE_LOOP ( 'NONE', ( #996, #1373, #1017, #1400, #1043, #1407, #1050, #1412, #1062, #1421 ) ) ; +#3283 = CARTESIAN_POINT ( 'NONE', ( 9.936381602685777600, -8.281219051232026700, 18.88001408660860000 ) ) ; +#3284 = ORIENTED_EDGE ( 'NONE', *, *, #602, .T. ) ; +#3285 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3785, #3683, #3678, #3675, #3665, #3659 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 3.469446951953614200E-018, 0.001055706139610784700, 0.002111412279221566000 ), + .UNSPECIFIED. ) ; +#3286 = CARTESIAN_POINT ( 'NONE', ( 15.33040859061596200, 24.55839146509624600, -59.08694895060669700 ) ) ; +#3287 = ADVANCED_FACE ( 'NONE', ( #576 ), #1981, .F. ) ; +#3288 = CARTESIAN_POINT ( 'NONE', ( 10.22264147712986000, 11.09633704577711000, -21.17106993630007100 ) ) ; +#3289 = ORIENTED_EDGE ( 'NONE', *, *, #2151, .F. ) ; +#3290 = CARTESIAN_POINT ( 'NONE', ( 21.56506666666666000, 4.913000608485465800, 18.24465176069332300 ) ) ; +#3291 = CARTESIAN_POINT ( 'NONE', ( 14.01268586217452300, 11.05894550256828300, -21.01294121286834800 ) ) ; +#3292 = CARTESIAN_POINT ( 'NONE', ( 15.92061672984947800, 21.12056672172582200, -59.68811494885402900 ) ) ; +#3293 = DIRECTION ( 'NONE', ( -0.9797467198165504800, 6.947247208038371700E-017, 0.2002407675991829700 ) ) ; +#3294 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000004700, 4.651280611074636100, -30.32742587825108400 ) ) ; +#3295 = DIRECTION ( 'NONE', ( 0.7071067811865473500, 0.7071067811865476800, 0.0000000000000000000 ) ) ; +#3296 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#3297 = CARTESIAN_POINT ( 'NONE', ( 1.258814870551596000, 10.00000000000000200, 12.57081540354972500 ) ) ; +#3298 = CARTESIAN_POINT ( 'NONE', ( 9.585435083568988500, 11.15305208521030000, -21.40517961927371700 ) ) ; +#3299 = CARTESIAN_POINT ( 'NONE', ( 14.02392424423255900, 13.42223856921322600, -20.38213016126009000 ) ) ; +#3300 = AXIS2_PLACEMENT_3D ( 'NONE', #1748, #1636, #1599 ) ; +#3301 = CARTESIAN_POINT ( 'NONE', ( 16.53591230968716300, 24.09671094341739200, -62.62330134019040900 ) ) ; +#3302 = CARTESIAN_POINT ( 'NONE', ( 7.346655815583614100, -7.428404836816951300, 18.84439639491622400 ) ) ; +#3303 = CARTESIAN_POINT ( 'NONE', ( 5.495038828337488500, 3.261476101247985600, -27.77929518887533100 ) ) ; +#3304 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1765, #1730, #1707, #1697, #1689, #1681 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002046501110074851600, 0.004093002220149703300 ), + .UNSPECIFIED. ) ; +#3305 = DIRECTION ( 'NONE', ( -0.9354143466934853300, -1.226634733346699600E-016, 0.3535533905932738400 ) ) ; +#3306 = CARTESIAN_POINT ( 'NONE', ( 9.375813802378088400, 11.17449376812154900, -21.49297331997306100 ) ) ; +#3307 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000000300, 10.00000000000000200, 14.27124344467704900 ) ) ; +#3308 = CARTESIAN_POINT ( 'NONE', ( 5.177679710986271100, 6.465048791062137000, 18.52842017660201200 ) ) ; +#3309 = CARTESIAN_POINT ( 'NONE', ( 8.969469403132176700, 11.22186382465767800, -21.68459313844767400 ) ) ; +#3310 = PLANE ( 'NONE', #2034 ) ; +#3311 = VERTEX_POINT ( 'NONE', #2094 ) ; +#3312 = AXIS2_PLACEMENT_3D ( 'NONE', #1510, #1498, #1493 ) ; +#3313 = CARTESIAN_POINT ( 'NONE', ( 14.53384781621672400, 12.85445447141985700, -18.05701256112483900 ) ) ; +#3314 = CARTESIAN_POINT ( 'NONE', ( 14.79354397883558300, 24.79596924851016500, -59.24253563560856200 ) ) ; +#3315 = CARTESIAN_POINT ( 'NONE', ( 24.22062174190136500, -10.00000000000111400, 17.31375120602460900 ) ) ; +#3316 = ORIENTED_EDGE ( 'NONE', *, *, #991, .F. ) ; +#3317 = ORIENTED_EDGE ( 'NONE', *, *, #555, .T. ) ; +#3318 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3319 = CARTESIAN_POINT ( 'NONE', ( 13.34843355693698700, 11.03122773325724300, -20.89529343317499500 ) ) ; +#3320 = CARTESIAN_POINT ( 'NONE', ( 15.51423423231202400, 21.05620778027986600, -59.90904996456745100 ) ) ; +#3321 = CARTESIAN_POINT ( 'NONE', ( 8.771682003150548500, 11.24788124243390500, -21.78878935736991500 ) ) ; +#3322 = CARTESIAN_POINT ( 'NONE', ( 7.351483784739836700, 7.430391058537707300, 18.84467067551367900 ) ) ; +#3323 = ORIENTED_EDGE ( 'NONE', *, *, #1036, .T. ) ; +#3324 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#3325 = ORIENTED_EDGE ( 'NONE', *, *, #438, .F. ) ; +#3326 = ORIENTED_EDGE ( 'NONE', *, *, #968, .T. ) ; +#3327 = CARTESIAN_POINT ( 'NONE', ( 8.194225306450443100, 11.33325360182494100, -22.12603918271455700 ) ) ; +#3328 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 4.014749828072292600, 13.61697764103997300 ) ) ; +#3329 = CARTESIAN_POINT ( 'NONE', ( 13.35583804060250700, 13.38960018144151400, -20.26413365596969400 ) ) ; +#3330 = CARTESIAN_POINT ( 'NONE', ( 16.26120354341311700, 24.04533744470476700, -62.84339082677624300 ) ) ; +#3331 = ORIENTED_EDGE ( 'NONE', *, *, #115, .F. ) ; +#3332 = CARTESIAN_POINT ( 'NONE', ( 18.66091484439134600, -9.999999999999998200, 13.82017794451305000 ) ) ; +#3333 = CARTESIAN_POINT ( 'NONE', ( 19.11586666666666900, 6.666666666666669600, 18.68082896311803200 ) ) ; +#3334 = ORIENTED_EDGE ( 'NONE', *, *, #12, .F. ) ; +#3335 = CARTESIAN_POINT ( 'NONE', ( 13.64817807594793400, 12.81724406773886900, -17.90428421803015300 ) ) ; +#3336 = ORIENTED_EDGE ( 'NONE', *, *, #362, .T. ) ; +#3337 = CARTESIAN_POINT ( 'NONE', ( 14.53079041082593600, 24.91658097274852700, -59.29795640803420300 ) ) ; +#3338 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999994900, -3.673940397442059200E-015, -2.499999999999999600 ) ) ; +#3339 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025143600, 0.9659258262890700900 ) ) ; +#3341 = CARTESIAN_POINT ( 'NONE', ( 15.68882421845095500, 23.92852009010228900, -63.25268161084625300 ) ) ; +#3340 = PERSON_AND_ORGANIZATION ( #2275, #3296 ) ; +#3342 = AXIS2_PLACEMENT_3D ( 'NONE', #1877, #1868, #1858 ) ; +#3343 = CARTESIAN_POINT ( 'NONE', ( 5.346660344892118400, -7.102539655107887200, 18.37807876050471400 ) ) ; +#3344 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3345 = FACE_OUTER_BOUND ( 'NONE', #3613, .T. ) ; +#3346 = CARTESIAN_POINT ( 'NONE', ( 8.747024140722667000, 10.00000000000000200, 14.69981776350269200 ) ) ; +#3347 = CARTESIAN_POINT ( 'NONE', ( 15.30820265758528400, 21.01817663592644800, -60.01080981239876200 ) ) ; +#3348 = AXIS2_PLACEMENT_3D ( 'NONE', #1619, #1615, #1607 ) ; +#3349 = ADVANCED_FACE ( 'NONE', ( #3672 ), #3579, .T. ) ; +#3350 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -9.184850993605144000E-016, 7.500000000000000000 ) ) ; +#3351 = FACE_OUTER_BOUND ( 'NONE', #3742, .T. ) ; +#3352 = CARTESIAN_POINT ( 'NONE', ( 12.90075244362725100, 11.02204165692804200, -20.85574829008653500 ) ) ; +#3353 = CARTESIAN_POINT ( 'NONE', ( 15.70451694993983300, 23.93279216533215200, -63.24143501889846400 ) ) ; +#3354 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3355 = CARTESIAN_POINT ( 'NONE', ( 12.14718321509200600, 12.80489637438695600, -17.85307992702165300 ) ) ; +#3356 = CARTESIAN_POINT ( 'NONE', ( 11.06068532150249500, 23.56941916577100200, -64.12443083459750400 ) ) ; +#3357 = CARTESIAN_POINT ( 'NONE', ( 19.59239769083764700, -1.029899394811714100, 20.28447093426814300 ) ) ; +#3358 = CARTESIAN_POINT ( 'NONE', ( 14.02908425120975600, 25.16713947078125100, -59.36982117153765900 ) ) ; +#3359 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 4.688437913382172100, 17.08773323077998500 ) ) ; +#3360 = CARTESIAN_POINT ( 'NONE', ( 12.90433596162766200, 13.37865667511387000, -20.22429415188950900 ) ) ; +#3361 = CARTESIAN_POINT ( 'NONE', ( 14.89068771242942500, 20.93797163819021300, -60.19557434272087400 ) ) ; +#3362 = CARTESIAN_POINT ( 'NONE', ( 6.791806324755517800, -7.699590979554111300, 18.54883550887993600 ) ) ; +#3363 = AXIS2_PLACEMENT_3D ( 'NONE', #2011, #2002, #1995 ) ; +#3364 = CARTESIAN_POINT ( 'NONE', ( 24.89839999999999900, 6.827919535239767700, 17.05260112796723200 ) ) ; +#3365 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -4.014749828072290900, 13.61697764103997500 ) ) ; +#3366 = ORIENTED_EDGE ( 'NONE', *, *, #2349, .T. ) ; +#3367 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -8.074441630149902200, -13.39944000404294900 ) ) ; +#3368 = AXIS2_PLACEMENT_3D ( 'NONE', #2197, #2114, #2103 ) ; +#3369 = VERTEX_POINT ( 'NONE', #1998 ) ; +#3370 = VERTEX_POINT ( 'NONE', #1986 ) ; +#3371 = CARTESIAN_POINT ( 'NONE', ( 15.42233060910153100, 23.87154933981695100, -63.41958202333540800 ) ) ; +#3372 = CARTESIAN_POINT ( 'NONE', ( 5.834821722338487500, 14.59610964385531200, -62.31416452082462600 ) ) ; +#3373 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3374 = VERTEX_POINT ( 'NONE', #1975 ) ; +#3375 = ORIENTED_EDGE ( 'NONE', *, *, #2373, .T. ) ; +#3376 = CARTESIAN_POINT ( 'NONE', ( 13.05126992483628200, 12.80486687571654900, -17.85295801650816100 ) ) ; +#3377 = AXIS2_PLACEMENT_3D ( 'NONE', #3680, #3526, #3512 ) ; +#3378 = CARTESIAN_POINT ( 'NONE', ( 13.79312815965260900, 25.29709385074033200, -59.38346425371582900 ) ) ; +#3379 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999996700, 4.999999999999995600, -2.698454273810511800E-017 ) ) ; +#3380 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3381 = ORIENTED_EDGE ( 'NONE', *, *, #285, .T. ) ; +#3382 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3383 = CARTESIAN_POINT ( 'NONE', ( 24.41134998268633900, 9.459258365728752300, 14.83565887926757500 ) ) ; +#3384 = AXIS2_PLACEMENT_3D ( 'NONE', #2799, #2793, #2783 ) ; +#3385 = ORIENTED_EDGE ( 'NONE', *, *, #1015, .T. ) ; +#3386 = CARTESIAN_POINT ( 'NONE', ( 7.488416291753850400, 11.47788851493754500, -22.67481328856048600 ) ) ; +#3387 = ORIENTED_EDGE ( 'NONE', *, *, #1080, .T. ) ; +#3388 = CARTESIAN_POINT ( 'NONE', ( 14.67904795680457900, 20.89574932854633400, -60.27866890227751600 ) ) ; +#3389 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -18.31287684118414600, -36.48065332244480900 ) ) ; +#3390 = ORIENTED_EDGE ( 'NONE', *, *, #1079, .F. ) ; +#3391 = CARTESIAN_POINT ( 'NONE', ( 9.622632083172568700, -8.285840806413826700, 18.79289067091757900 ) ) ; +#3392 = TOROIDAL_SURFACE ( 'NONE', #2704, 2.928932188134531600, 5.000000000000000000 ) ; +#3393 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#3394 = CARTESIAN_POINT ( 'NONE', ( 12.22183835393508000, 11.02206341364533600, -20.85584151256815500 ) ) ; +#3395 = CARTESIAN_POINT ( 'NONE', ( 14.84893646909331900, 23.75151004134259100, -63.73152323585991000 ) ) ; +#3396 = CARTESIAN_POINT ( 'NONE', ( 8.325491134995672800, -8.398050329155889700, 18.49226367573979200 ) ) ; +#3397 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.232595164407830900E-032, 2.138211768073756800E-048 ) ) ; +#3398 = VECTOR ( 'NONE', #3482, 1000.000000000000000 ) ; +#3399 = AXIS2_PLACEMENT_3D ( 'NONE', #2260, #2253, #2243 ) ; +#3400 = PERSON_AND_ORGANIZATION ( #2275, #3296 ) ; +#3401 = CARTESIAN_POINT ( 'NONE', ( 7.830327021823372900, 11.39984501703738200, -22.38355098919667100 ) ) ; +#3402 = CARTESIAN_POINT ( 'NONE', ( 13.36444557285180700, 25.56240489591148800, -59.37772521925455700 ) ) ; +#3403 = CARTESIAN_POINT ( 'NONE', ( 15.37813218813453100, -1.925929944387235900E-031, 17.50000000000000000 ) ) ; +#3404 = CARTESIAN_POINT ( 'NONE', ( 12.22003383899619200, 13.37868247554923300, -20.22438786352604400 ) ) ; +#3405 = CARTESIAN_POINT ( 'NONE', ( 14.24900235184155400, 20.81436847150544600, -60.42464362913695900 ) ) ; +#3406 = CARTESIAN_POINT ( 'NONE', ( 8.939841690758907300, -7.767890630076244900, 19.02018977847628300 ) ) ; +#3407 = CARTESIAN_POINT ( 'NONE', ( 5.997101041041010400, 6.932905552281706500, 18.66017758393572400 ) ) ; +#3408 = CARTESIAN_POINT ( 'NONE', ( 7.969049992558350200, -5.537389203067906600, 20.38692187478948300 ) ) ; +#3409 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1755, #1767, #1718, #1715, #1709, #1692, #1687, #1679, #1675, #1669 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001278990014806027700, 0.002557980029612055500, 0.003836970044418083200, 0.005115960059224111000 ), + .UNSPECIFIED. ) ; +#3410 = CARTESIAN_POINT ( 'NONE', ( 14.55772943449808200, 23.69271671268340600, -63.86532230792360600 ) ) ; +#3411 = CARTESIAN_POINT ( 'NONE', ( 19.06357827766150900, 12.18129507813263500, -62.96121213358091500 ) ) ; +#3412 = ORIENTED_EDGE ( 'NONE', *, *, #882, .T. ) ; +#3413 = CARTESIAN_POINT ( 'NONE', ( 90.32016550602631400, 13.40741737109300400, -20.21665475151220500 ) ) ; +#3414 = CARTESIAN_POINT ( 'NONE', ( 12.14605113858013200, 12.80489615493474900, -17.85307902008143800 ) ) ; +#3415 = CARTESIAN_POINT ( 'NONE', ( 13.17731121756274200, 25.69659779327358300, -59.35626766266870600 ) ) ; +#3416 = CARTESIAN_POINT ( 'NONE', ( 19.94919999999999000, 4.402089587893982500, -29.84308411396436600 ) ) ; +#3417 = ORIENTED_EDGE ( 'NONE', *, *, #1420, .F. ) ; +#3418 = CARTESIAN_POINT ( 'NONE', ( 7.036026315637873700, 7.456514879535489200, 18.73900546398591900 ) ) ; +#3419 = ORIENTED_EDGE ( 'NONE', *, *, #2683, .T. ) ; +#3420 = AXIS2_PLACEMENT_3D ( 'NONE', #2298, #2286, #2282 ) ; +#3421 = CARTESIAN_POINT ( 'NONE', ( 5.546460510922766000, -9.999999999999996400, 17.50587012974933600 ) ) ; +#3422 = CARTESIAN_POINT ( 'NONE', ( 6.224600000000037900, 3.354751084655891000, 20.42893218813456700 ) ) ; +#3423 = ORIENTED_EDGE ( 'NONE', *, *, #291, .F. ) ; +#3424 = ORIENTED_EDGE ( 'NONE', *, *, #779, .T. ) ; +#3425 = EDGE_LOOP ( 'NONE', ( #2868, #2872, #2876, #2880, #2909, #2915 ) ) ; +#3426 = CARTESIAN_POINT ( 'NONE', ( 14.03059707582970700, 20.77521156695461000, -60.48752588501964300 ) ) ; +#3427 = ORIENTED_EDGE ( 'NONE', *, *, #2157, .F. ) ; +#3428 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9659258262890700900, 0.2588190451025143600 ) ) ; +#3429 = DIRECTION ( 'NONE', ( -1.335906693713116800E-016, -0.2588190451025144700, 0.9659258262890699800 ) ) ; +#3430 = CARTESIAN_POINT ( 'NONE', ( 90.32016550602631400, 7.455127018922267400, 1.997595264191612600 ) ) ; +#3431 = ORIENTED_EDGE ( 'NONE', *, *, #2860, .T. ) ; +#3432 = AXIS2_PLACEMENT_3D ( 'NONE', #2341, #2336, #2330 ) ; +#3433 = CARTESIAN_POINT ( 'NONE', ( 13.96454309132788300, 23.59025563712417700, -64.08398182602717000 ) ) ; +#3434 = CARTESIAN_POINT ( 'NONE', ( 19.94919999999999800, 4.651280611074646700, -30.32742587825108100 ) ) ; +#3435 = CARTESIAN_POINT ( 'NONE', ( 3.333333333333335300, 4.913000608485470300, 18.24465176069331600 ) ) ; +#3436 = CARTESIAN_POINT ( 'NONE', ( 1.606218528810793700, -5.433907193222314200, 17.68057799747048300 ) ) ; +#3437 = ORIENTED_EDGE ( 'NONE', *, *, #226, .T. ) ; +#3438 = ORIENTED_EDGE ( 'NONE', *, *, #1492, .F. ) ; +#3439 = CARTESIAN_POINT ( 'NONE', ( 8.480510561776196000, -6.100011023492839100, 20.23211946412715500 ) ) ; +#3440 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#3441 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000100, 5.000000000000002700, 14.27124344467704700 ) ) ; +#3442 = DIRECTION ( 'NONE', ( -0.7499999999999980000, -0.1711927069771170500, 0.6388998803238658000 ) ) ; +#3443 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3444 = CIRCLE ( 'NONE', #2613, 7.071067811865436400 ) ; +#3445 = APPROVAL_DATE_TIME ( #354, #650 ) ; +#3446 = CARTESIAN_POINT ( 'NONE', ( 11.99332455268610300, 11.02442836639409800, -20.86598677573157800 ) ) ; +#3447 = CARTESIAN_POINT ( 'NONE', ( 12.86481207674278500, 25.94748506541666100, -59.29805231998599900 ) ) ; +#3448 = CARTESIAN_POINT ( 'NONE', ( 6.816295428198269900, -6.115304675228089500, 19.19276157567931700 ) ) ; +#3449 = CARTESIAN_POINT ( 'NONE', ( 3.486743111209673600, 5.612531535564328600, 18.15900926220602300 ) ) ; +#3450 = CYLINDRICAL_SURFACE ( 'NONE', #2264, 5.000000000000000000 ) ; +#3451 = ADVANCED_FACE ( 'NONE', ( #1161 ), #401, .F. ) ; +#3452 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -9.999999999999998200, 12.51759777210976000 ) ) ; +#3453 = CARTESIAN_POINT ( 'NONE', ( 13.58570731853976100, 20.70750842868273600, -60.59052637109839200 ) ) ; +#3454 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3455 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -10.00000000000000000, 12.54292954420088800 ) ) ; +#3456 = CARTESIAN_POINT ( 'NONE', ( 11.98967046351538800, 13.38149023766683100, -20.23459208293824900 ) ) ; +#3457 = CARTESIAN_POINT ( 'NONE', ( 13.66059262238113600, 23.54656547901479200, -64.16899652104075400 ) ) ; +#3458 = CARTESIAN_POINT ( 'NONE', ( 5.782533333333336900, 6.666666666666668700, 18.68082896311803200 ) ) ; +#3459 = AXIS2_PLACEMENT_3D ( 'NONE', #3122, #3117, #3111 ) ; +#3460 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890698700, -0.2588190451025151900 ) ) ; +#3461 = CARTESIAN_POINT ( 'NONE', ( 7.769904431268503100, -9.999999999999998200, 14.39245831977510200 ) ) ; +#3462 = ORIENTED_EDGE ( 'NONE', *, *, #844, .T. ) ; +#3463 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000800, 0.4639637146298049000, -25.28576143110685200 ) ) ; +#3464 = CARTESIAN_POINT ( 'NONE', ( 6.056996514215954100, -7.380613588928032900, 18.49750234294615600 ) ) ; +#3465 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1813, #3031, #65, #2134, #358, #2457, #646, #2763, #934, #3061, #1223, #3355, #1518, #3648, #1828, #94, #2150, #367, #2471, #665, #2776, #948, #3075, #1237 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001813804198288774500, 0.003627608396577549100, 0.004534510495721939500, 0.005441412594866329400, 0.007255216793155106800, 0.008162118892299497600, 0.009069020991443887600, 0.01088282518973266400, 0.01178972728887705600, 0.01269662938802144600, 0.01451043358631022600 ), + .UNSPECIFIED. ) ; +#3466 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -3.061616997868381200E-016, 2.500000000000002200 ) ) ; +#3467 = VERTEX_POINT ( 'NONE', #1902 ) ; +#3468 = VERTEX_POINT ( 'NONE', #1807 ) ; +#3469 = CARTESIAN_POINT ( 'NONE', ( 11.84136607026566100, 12.80807976335142200, -17.86624737360385500 ) ) ; +#3470 = CARTESIAN_POINT ( 'NONE', ( 12.74593316331265000, 26.06082150086394800, -59.26122804673202900 ) ) ; +#3471 = CARTESIAN_POINT ( 'NONE', ( 3.388202625412050800, 0.5598948729943180600, -27.54297175331940300 ) ) ; +#3472 = EDGE_LOOP ( 'NONE', ( #2819, #1178, #3687, #2908 ) ) ; +#3473 = ORIENTED_EDGE ( 'NONE', *, *, #1935, .F. ) ; +#3474 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -9.999423642752454100, 12.59359090277177100 ) ) ; +#3475 = ORIENTED_EDGE ( 'NONE', *, *, #1309, .F. ) ; +#3476 = ORIENTED_EDGE ( 'NONE', *, *, #1113, .F. ) ; +#3477 = AXIS2_PLACEMENT_3D ( 'NONE', #3153, #3144, #3139 ) ; +#3478 = CARTESIAN_POINT ( 'NONE', ( 13.35774446679545400, 20.67894344476618300, -60.63071541406951300 ) ) ; +#3479 = ORIENTED_EDGE ( 'NONE', *, *, #631, .T. ) ; +#3480 = CARTESIAN_POINT ( 'NONE', ( 14.82922667886995600, 10.00000000000000200, 15.03673185611408600 ) ) ; +#3481 = VERTEX_POINT ( 'NONE', #1961 ) ; +#3482 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#3483 = CARTESIAN_POINT ( 'NONE', ( 11.54230900308376700, 11.03380612867310100, -20.90607087944649200 ) ) ; +#3484 = AXIS2_PLACEMENT_3D ( 'NONE', #496, #232, #227 ) ; +#3485 = CARTESIAN_POINT ( 'NONE', ( 13.05429410113784500, 23.48738583920511400, -64.28159322191133600 ) ) ; +#3486 = VERTEX_POINT ( 'NONE', #1886 ) ; +#3487 = FACE_OUTER_BOUND ( 'NONE', #3595, .T. ) ; +#3488 = CIRCLE ( 'NONE', #3384, 10.00000000000000500 ) ; +#3489 = CARTESIAN_POINT ( 'NONE', ( 5.696124566414944500, -7.232284611401823300, 18.44786122542086600 ) ) ; +#3490 = CARTESIAN_POINT ( 'NONE', ( 6.296816218321224800, 24.18962766689224300, -60.45641139332825300 ) ) ; +#3491 = CARTESIAN_POINT ( 'NONE', ( 17.20023040354485400, 6.790965163150017900, 19.22509139911651100 ) ) ; +#3492 = CARTESIAN_POINT ( 'NONE', ( 13.02920000000000100, -1.925929944387235900E-031, 16.50000000000000000 ) ) ; +#3493 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -10.00000000000000200, 7.500000000000000000 ) ) ; +#3494 = CARTESIAN_POINT ( 'NONE', ( 11.53529145146651800, 13.39259165376384100, -20.27486602473013700 ) ) ; +#3495 = CARTESIAN_POINT ( 'NONE', ( 12.56606418709670900, 26.22288906262585700, -59.20471350282531400 ) ) ; +#3496 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -9.999807868217018800, 12.56826204476220000 ) ) ; +#3497 = CARTESIAN_POINT ( 'NONE', ( 12.90302057584377800, 20.64034593018389800, -60.68399193929779800 ) ) ; +#3498 = AXIS2_PLACEMENT_3D ( 'NONE', #2182, #2171, #1672 ) ; +#3499 = CARTESIAN_POINT ( 'NONE', ( 11.24001200409416700, 12.82069195956533400, -17.91827850483575400 ) ) ; +#3500 = CARTESIAN_POINT ( 'NONE', ( 12.75115315697924200, 23.47171686470412100, -64.30979288343181100 ) ) ; +#3501 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3502 = VERTEX_POINT ( 'NONE', #1871 ) ; +#3503 = AXIS2_PLACEMENT_3D ( 'NONE', #3664, #3324, #2484 ) ; +#3504 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3505 = ORIENTED_EDGE ( 'NONE', *, *, #1335, .F. ) ; +#3506 = ORIENTED_EDGE ( 'NONE', *, *, #1064, .T. ) ; +#3507 = CARTESIAN_POINT ( 'NONE', ( 22.44919999999999800, 19.65546469306329100, -53.19394306809147100 ) ) ; +#3508 = ORIENTED_EDGE ( 'NONE', *, *, #1354, .F. ) ; +#3509 = CARTESIAN_POINT ( 'NONE', ( 12.50772392168587500, 26.26750395294129700, -59.18681045674046000 ) ) ; +#3510 = VERTEX_POINT ( 'NONE', #2110 ) ; +#3511 = CARTESIAN_POINT ( 'NONE', ( 16.57290886500384600, 8.398050329153829100, 18.49226367573997700 ) ) ; +#3512 = DIRECTION ( 'NONE', ( -1.060000827627150900E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3513 = CARTESIAN_POINT ( 'NONE', ( 11.31902038544800600, 11.04079927581416800, -20.93592479911227500 ) ) ; +#3514 = VERTEX_POINT ( 'NONE', #1838 ) ; +#3515 = ORIENTED_EDGE ( 'NONE', *, *, #2181, .T. ) ; +#3516 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025144100, 0.9659258262890699800 ) ) ; +#3517 = AXIS2_PLACEMENT_3D ( 'NONE', #3441, #3305, #3104 ) ; +#3518 = ORIENTED_EDGE ( 'NONE', *, *, #1983, .T. ) ; +#3519 = CARTESIAN_POINT ( 'NONE', ( 5.942909205209978100, -2.832085623939589100, 20.42893218813457100 ) ) ; +#3520 = ORIENTED_EDGE ( 'NONE', *, *, #888, .F. ) ; +#3521 = CARTESIAN_POINT ( 'NONE', ( 6.725179759632461600, -7.159141310378704000, 18.80105982760477800 ) ) ; +#3522 = ORIENTED_EDGE ( 'NONE', *, *, #686, .F. ) ; +#3523 = CARTESIAN_POINT ( 'NONE', ( 12.67566486773462700, 20.63018611626079500, -60.69736630410581300 ) ) ; +#3524 = CARTESIAN_POINT ( 'NONE', ( 19.88384129528202100, 10.00000000000000200, 13.41634289988366800 ) ) ; +#3525 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1, #193, #2963, #1992, #303, #2714, #2941, #554, #887, #911 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.002686391017250283900, 0.003948031222628419500, 0.005209671428006553700, 0.006471311633384687100, 0.007732951838762821400 ), + .UNSPECIFIED. ) ; +#3526 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.838808320239663900E-032, -1.060000827627150900E-016 ) ) ; +#3527 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9659258262890700900, 0.2588190451025143600 ) ) ; +#3528 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#3529 = CARTESIAN_POINT ( 'NONE', ( 11.31041306671463300, 13.40086529363639100, -20.30486255416337100 ) ) ; +#3530 = EDGE_CURVE ( 'NONE', #1957, #1277, #2805, .T. ) ; +#3531 = CARTESIAN_POINT ( 'NONE', ( 12.14488841178397000, 23.47179681049484400, -64.30964638652758900 ) ) ; +#3532 = CIRCLE ( 'NONE', #2585, 7.071067811865436400 ) ; +#3533 = CIRCLE ( 'NONE', #3220, 0.5800000000000006300 ) ; +#3534 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -9.999423642752454100, 12.59359090277177100 ) ) ; +#3535 = DIRECTION ( 'NONE', ( 1.387778780781445400E-016, 1.249000902703301000E-014, -1.000000000000000000 ) ) ; +#3536 = FACE_OUTER_BOUND ( 'NONE', #3822, .T. ) ; +#3537 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3538 = CARTESIAN_POINT ( 'NONE', ( 22.36819599384032700, 10.00000000000000400, 12.77086699763029600 ) ) ; +#3539 = CARTESIAN_POINT ( 'NONE', ( 19.66985994779884100, -0.5900247819492338000, 20.26137899434855800 ) ) ; +#3540 = CARTESIAN_POINT ( 'NONE', ( 19.11586666666666500, -6.666666666666666100, 18.68082896311803500 ) ) ; +#3541 = AXIS2_PLACEMENT_3D ( 'NONE', #2928, #2490, #2319 ) ; +#3542 = CARTESIAN_POINT ( 'NONE', ( 10.94229384727363000, 12.83009403230411200, -17.95703106831804200 ) ) ; +#3543 = CARTESIAN_POINT ( 'NONE', ( 12.39022131779868900, 26.26727458465136800, -59.18689873626147600 ) ) ; +#3544 = CARTESIAN_POINT ( 'NONE', ( 19.11586666666666900, -6.666666666666665200, 18.68082896311803200 ) ) ; +#3545 = AXIS2_PLACEMENT_3D ( 'NONE', #3389, #3428, #3516 ) ; +#3546 = CARTESIAN_POINT ( 'NONE', ( 7.711165969809332700, -5.261965970765607500, 20.42893218745834000 ) ) ; +#3547 = CARTESIAN_POINT ( 'NONE', ( 12.22096630883777700, 20.63023805016854000, -60.69729687822734800 ) ) ; +#3548 = AXIS2_PLACEMENT_3D ( 'NONE', #2832, #2822, #2810 ) ; +#3549 = CARTESIAN_POINT ( 'NONE', ( 22.44919999999999800, -88.81885793164890700, -72.39384004447242700 ) ) ; +#3550 = CARTESIAN_POINT ( 'NONE', ( 18.73364043544255300, -6.882801464534871600, 18.74360562419775900 ) ) ; +#3551 = VERTEX_POINT ( 'NONE', #1919 ) ; +#3552 = CARTESIAN_POINT ( 'NONE', ( 10.65566724950914300, 11.06867966701677600, -21.05424734038754400 ) ) ; +#3553 = CARTESIAN_POINT ( 'NONE', ( 11.84176461069779900, 23.48754547016832800, -64.28130030919938100 ) ) ; +#3554 = CARTESIAN_POINT ( 'NONE', ( 14.82922667887608400, -9.999999999999998200, 15.03673185611342700 ) ) ; +#3555 = ORIENTED_EDGE ( 'NONE', *, *, #706, .T. ) ; +#3556 = ORIENTED_EDGE ( 'NONE', *, *, #1064, .F. ) ; +#3557 = EDGE_LOOP ( 'NONE', ( #1611, #3375, #2883, #3412, #3419 ) ) ; +#3558 = ORIENTED_EDGE ( 'NONE', *, *, #1439, .T. ) ; +#3559 = CARTESIAN_POINT ( 'NONE', ( 12.33179245945641400, 26.22243881802654600, -59.20488593715816000 ) ) ; +#3560 = AXIS2_PLACEMENT_3D ( 'NONE', #2213, #1930, #2074 ) ; +#3561 = ORIENTED_EDGE ( 'NONE', *, *, #1309, .T. ) ; +#3562 = CARTESIAN_POINT ( 'NONE', ( 6.531074233889238000, -5.918125766110764000, 19.13050627773648300 ) ) ; +#3563 = CARTESIAN_POINT ( 'NONE', ( 18.34305740730532700, -7.078209278572898300, 18.78499489699473600 ) ) ; +#3564 = CARTESIAN_POINT ( 'NONE', ( 10.64283057437340600, 13.43371265344172000, -20.42360687517734500 ) ) ; +#3565 = ORIENTED_EDGE ( 'NONE', *, *, #1313, .F. ) ; +#3566 = CARTESIAN_POINT ( 'NONE', ( 11.99362345803263400, 20.64044964336772000, -60.68385313398016500 ) ) ; +#3567 = VERTEX_POINT ( 'NONE', #1821 ) ; +#3568 = CARTESIAN_POINT ( 'NONE', ( 24.41134998268633500, -9.459258365728747000, 14.83565887926757300 ) ) ; +#3569 = AXIS2_PLACEMENT_3D ( 'NONE', #3372, #3442, #1601 ) ; +#3570 = ORIENTED_EDGE ( 'NONE', *, *, #779, .F. ) ; +#3571 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3572 = AXIS2_PLACEMENT_3D ( 'NONE', #2003, #1916, #1899 ) ; +#3573 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #127, #111, #71, #62, #58, #50, #46, #31, #18, #14 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002018466505869781000, 0.004036933011739561900, 0.006055399517609342900, 0.008073866023479123900 ), + .UNSPECIFIED. ) ; +#3575 = CARTESIAN_POINT ( 'NONE', ( 11.23553363328965200, 23.54685683911352000, -64.16843128412055800 ) ) ; +#3574 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#3576 = CARTESIAN_POINT ( 'NONE', ( 22.19313963250995800, -0.8779108195971129200, 18.42073646242887700 ) ) ; +#3577 = CARTESIAN_POINT ( 'NONE', ( 17.54691621526016800, -7.430391058537700200, 18.84467067551368700 ) ) ; +#3578 = CARTESIAN_POINT ( 'NONE', ( 10.05782299932628000, 12.86752149267873700, -18.11063567162150500 ) ) ; +#3579 = CYLINDRICAL_SURFACE ( 'NONE', #1967, 10.00000000000000200 ) ; +#3580 = AXIS2_PLACEMENT_3D ( 'NONE', #19, #1570, #1245 ) ; +#3581 = CARTESIAN_POINT ( 'NONE', ( 12.15165000164142700, 26.06004701541465400, -59.26148301863628400 ) ) ; +#3582 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890698700, -0.2588190451025151900 ) ) ; +#3583 = CARTESIAN_POINT ( 'NONE', ( 9.520853677182783400, -7.266828808006573900, 19.69984150253774000 ) ) ; +#3584 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.838808320239663900E-032, 1.060000827627150900E-016 ) ) ; +#3585 = CARTESIAN_POINT ( 'NONE', ( 17.14163691163875200, -7.587961172463354700, 18.86260440344594600 ) ) ; +#3586 = AXIS2_PLACEMENT_3D ( 'NONE', #1155, #2986, #2255 ) ; +#3587 = CARTESIAN_POINT ( 'NONE', ( 10.22206225725303200, 11.09638007258919500, -21.17124974587024900 ) ) ; +#3588 = CARTESIAN_POINT ( 'NONE', ( 11.53895022495795300, 20.67913387522943600, -60.63044817685222700 ) ) ; +#3589 = DIRECTION ( 'NONE', ( -0.7071067811865474600, 0.7071067811865474600, 1.734723475976806700E-015 ) ) ; +#3590 = AXIS2_PLACEMENT_3D ( 'NONE', #1107, #2940, #257 ) ; +#3591 = ORIENTED_EDGE ( 'NONE', *, *, #1654, .T. ) ; +#3592 = CARTESIAN_POINT ( 'NONE', ( 20.69275187937535100, -1.440427822882706300, 19.13380485979193300 ) ) ; +#3593 = CARTESIAN_POINT ( 'NONE', ( 19.11586666666666900, 6.666666666666669600, 18.68082896311803200 ) ) ; +#3594 = CARTESIAN_POINT ( 'NONE', ( 10.24595869766491800, -9.999999999998197000, 17.41257339470795900 ) ) ; +#3595 = EDGE_LOOP ( 'NONE', ( #1733, #2588, #278, #1044 ) ) ; +#3596 = CARTESIAN_POINT ( 'NONE', ( 1.647059527481709500, 9.999999999998864900, 17.27481323466242500 ) ) ; +#3597 = ORIENTED_EDGE ( 'NONE', *, *, #585, .T. ) ; +#3598 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -9.184850993605144000E-016, 7.500000000000000000 ) ) ; +#3599 = CARTESIAN_POINT ( 'NONE', ( 25.15642280172790600, 5.084591110718487400, 17.51037509623230900 ) ) ; +#3600 = CARTESIAN_POINT ( 'NONE', ( 10.20722098564157000, 13.46626428591964400, -20.54099676404879200 ) ) ; +#3601 = ORIENTED_EDGE ( 'NONE', *, *, #334, .T. ) ; +#3602 = ORIENTED_EDGE ( 'NONE', *, *, #889, .F. ) ; +#3603 = CARTESIAN_POINT ( 'NONE', ( 10.93157266102281100, 23.59060988119676200, -64.08326587013543500 ) ) ; +#3604 = CARTESIAN_POINT ( 'NONE', ( 18.69920000000000800, 10.00000000000000000, 17.57843258350778700 ) ) ; +#3605 = CARTESIAN_POINT ( 'NONE', ( 15.91010599314794200, -8.020075811982335900, 18.89331625543000100 ) ) ; +#3606 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 17.50000000000000000 ) ) ; +#3607 = ORIENTED_EDGE ( 'NONE', *, *, #2006, .F. ) ; +#3608 = CARTESIAN_POINT ( 'NONE', ( 12.03255933302564400, 25.94658244507670000, -59.29831107143618100 ) ) ; +#3609 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.184850993605144000E-016, 7.500000000000000000 ) ) ; +#3610 = ORIENTED_EDGE ( 'NONE', *, *, #2626, .F. ) ; +#3611 = CARTESIAN_POINT ( 'NONE', ( 6.844057217893036300, 10.00000000000000200, 14.04252096809097800 ) ) ; +#3612 = CARTESIAN_POINT ( 'NONE', ( 5.408951387668929000, -1.468153203937836000, 20.31424176941649800 ) ) ; +#3613 = EDGE_LOOP ( 'NONE', ( #1459, #1147, #1179, #1511, #1221, #1553 ) ) ; +#3614 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3615 = CARTESIAN_POINT ( 'NONE', ( 9.479683009514808100, 12.90466210848783900, -18.26253715042151500 ) ) ; +#3616 = CARTESIAN_POINT ( 'NONE', ( 11.31097949572116200, 20.70774102193169600, -60.59018842338703300 ) ) ; +#3617 = CARTESIAN_POINT ( 'NONE', ( 23.29218147118921000, -5.433907193222314200, 17.68057799747048300 ) ) ; +#3618 = AXIS2_PLACEMENT_3D ( 'NONE', #2873, #858, #3582 ) ; +#3619 = CIRCLE ( 'NONE', #2900, 2.500000000000000000 ) ; +#3620 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999995800, -9.184850993605144000E-016, 7.500000000000000000 ) ) ; +#3621 = CARTESIAN_POINT ( 'NONE', ( 9.584985429037704600, 11.15309637802557100, -21.40536134905006400 ) ) ; +#3622 = CARTESIAN_POINT ( 'NONE', ( 10.33871206881902400, 23.69309560745683600, -63.86447340393877400 ) ) ; +#3623 = PLANE ( 'NONE', #3377 ) ; +#3624 = DIRECTION ( 'NONE', ( -1.734723475976807700E-015, -0.2588190451025145800, 0.9659258262890698700 ) ) ; +#3625 = CIRCLE ( 'NONE', #3348, 2.928932188134530700 ) ; +#3626 = LINE ( 'NONE', #1290, #2322 ) ; +#3627 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.298510400299580000E-032, 1.325001034533938600E-016 ) ) ; +#3628 = CARTESIAN_POINT ( 'NONE', ( 9.569978253601226100, 13.53172188900735600, -20.77441040866337500 ) ) ; +#3629 = CARTESIAN_POINT ( 'NONE', ( 11.71988856822787100, 25.69570780729631900, -59.35642693664865300 ) ) ; +#3630 = CARTESIAN_POINT ( 'NONE', ( 19.35193948907639300, -9.999999999999998200, 17.50587012974835200 ) ) ; +#3631 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890702000, 0.2588190451025139100 ) ) ; +#3632 = CARTESIAN_POINT ( 'NONE', ( 8.630247238794890300, 12.98026408872085500, -18.56658365033100500 ) ) ; +#3633 = CARTESIAN_POINT ( 'NONE', ( 10.86633405166021200, 20.77546342002466800, -60.48712670388831500 ) ) ; +#3634 = DIRECTION ( 'NONE', ( -1.335906693713116800E-016, -0.2588190451025143000, 0.9659258262890700900 ) ) ; +#3635 = CARTESIAN_POINT ( 'NONE', ( 14.79196990989867900, 23.73857889406705400, -63.76078104164003000 ) ) ; +#3636 = ADVANCED_FACE ( 'NONE', ( #674, #492 ), #1726, .T. ) ; +#3637 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #950, #1847, #1533, #2780, #669, #2473, #369, #2154, #97, #1830, #3650, #1523, #3356, #1225, #3062, #938, #2765, #649, #2460, #360, #2137, #79, #1817, #3635, #1504, #3341, #1216, #2327, #922, #2752, #2441, #636, #349, #2123, #67, #1797 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 1.734723475976807100E-018, 0.002073778315922766300, 0.003110667473884148200, 0.004147556631845529200, 0.005184445789806912800, 0.006221334947768296400, 0.007258224105729680800, 0.008295113263691065300, 0.008813557842671758400, 0.009332002421652449800, 0.009850447000633144600, 0.01036889157961383800, 0.01140578073757522600, 0.01244266989553661900, 0.01347955905349801400, 0.01451644821145940700, 0.01555333736942080000, 0.01659022652738219300 ), + .UNSPECIFIED. ) ; +#3638 = CARTESIAN_POINT ( 'NONE', ( 5.333412342300637700, -1.183482559978653600, 20.29262752374366500 ) ) ; +#3639 = DIRECTION ( 'NONE', ( 1.795917894276925500E-016, 0.2588190451025140800, -0.9659258262890700900 ) ) ; +#3640 = ORIENTED_EDGE ( 'NONE', *, *, #110, .F. ) ; +#3641 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.455127018922267400, 1.997595264191612600 ) ) ; +#3642 = CARTESIAN_POINT ( 'NONE', ( 10.04780932583439300, 23.75185014294542200, -63.73069372530581900 ) ) ; +#3643 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2148, #2112, #2083 ), + ( #2072, #2065, #2049 ), + ( #2038, #2027, #2016 ), + ( #2001, #1987, #1977 ), + ( #1962, #1946, #1934 ), + ( #1920, #1905, #1874 ), + ( #1856, #1839, #1825 ), + ( #1822, #1809, #1793 ), + ( #1787, #1778, #1774 ), + ( #1764, #1746, #1720 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.002804908575918425000, 0.004808008348614657000, 0.006811108121310888200, 0.008814207894007119300, 0.01081730766670335000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8164965809277262600, 1.000000000000000000), + ( 1.000000000000000000, 0.8299118315379538900, 1.000000000000000000), + ( 1.000000000000000000, 0.8388858889004362500, 1.000000000000000000), + ( 1.000000000000000000, 0.8508569533181444800, 1.000000000000000000), + ( 1.000000000000000000, 0.8537826349910601100, 1.000000000000000000), + ( 1.000000000000000000, 0.8538151735076907600, 1.000000000000000000), + ( 1.000000000000000000, 0.8509445266550389500, 1.000000000000000000), + ( 1.000000000000000000, 0.8390457440706974300, 1.000000000000000000), + ( 1.000000000000000000, 0.8300754712354091500, 1.000000000000000000), + ( 1.000000000000000000, 0.8164965809277255900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3644 = VERTEX_POINT ( 'NONE', #1763 ) ; +#3645 = CARTESIAN_POINT ( 'NONE', ( 9.375411862830683100, 11.17453714665121600, -21.49315003115282300 ) ) ; +#3646 = CARTESIAN_POINT ( 'NONE', ( 11.53277993884728200, 25.56162968903309400, -59.37779278252971000 ) ) ; +#3647 = VERTEX_POINT ( 'NONE', #1670 ) ; +#3648 = CARTESIAN_POINT ( 'NONE', ( 11.24465756983069100, 12.82056983121937900, -17.91777502276421800 ) ) ; +#3649 = ORIENTED_EDGE ( 'NONE', *, *, #2626, .T. ) ; +#3650 = CARTESIAN_POINT ( 'NONE', ( 10.08709180142284700, 23.74245649232674200, -63.75172494340529300 ) ) ; +#3651 = ORIENTED_EDGE ( 'NONE', *, *, #346, .T. ) ; +#3652 = EDGE_LOOP ( 'NONE', ( #2499, #1230, #1246, #1291 ) ) ; +#3653 = CARTESIAN_POINT ( 'NONE', ( 10.64815699435100200, 20.81459703583253800, -60.42425468202905100 ) ) ; +#3654 = ORIENTED_EDGE ( 'NONE', *, *, #2419, .F. ) ; +#3655 = CARTESIAN_POINT ( 'NONE', ( 10.70511563834373600, 8.482653894107791400, 18.83990488806293200 ) ) ; +#3656 = VERTEX_POINT ( 'NONE', #1693 ) ; +#3657 = CARTESIAN_POINT ( 'NONE', ( 9.360576466507179600, 13.55634533548227700, -20.86186219554736000 ) ) ; +#3658 = VERTEX_POINT ( 'NONE', #1801 ) ; +#3659 = CARTESIAN_POINT ( 'NONE', ( 11.40526348944505300, -9.999999999999998200, 15.32111431373162300 ) ) ; +#3660 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000004700, 12.93374564363918300, -28.10814606143646100 ) ) ; +#3661 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, 8.016164268297952600, 12.83319078563422100 ) ) ; +#3662 = ORIENTED_EDGE ( 'NONE', *, *, #1377, .T. ) ; +#3664 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 16.50000000000000000 ) ) ; +#3663 = LINE ( 'NONE', #559, #928 ) ; +#3665 = CARTESIAN_POINT ( 'NONE', ( 11.75031873190733800, -9.999999999999998200, 15.39163675102719800 ) ) ; +#3666 = FACE_OUTER_BOUND ( 'NONE', #1514, .T. ) ; +#3667 = CARTESIAN_POINT ( 'NONE', ( 9.475264550009844900, 23.87172406293336700, -63.41907344630107000 ) ) ; +#3668 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -3.061616997868382300E-015, -12.50000000000000000 ) ) ; +#3669 = AXIS2_PLACEMENT_3D ( 'NONE', #2312, #228, #1996 ) ; +#3670 = CARTESIAN_POINT ( 'NONE', ( 19.94920000000000100, -11.59115779176003800, -61.56645032909982300 ) ) ; +#3671 = CARTESIAN_POINT ( 'NONE', ( 22.44919999999999400, 12.93374564363917600, -28.10814606143646100 ) ) ; +#3672 = FACE_OUTER_BOUND ( 'NONE', #2194, .T. ) ; +#3673 = CARTESIAN_POINT ( 'NONE', ( 8.350815817174353800, 13.00878627922772200, -18.68061103038935000 ) ) ; +#3674 = CARTESIAN_POINT ( 'NONE', ( 11.10457807541617600, 25.29671018642998000, -59.38342450421868100 ) ) ; +#3675 = CARTESIAN_POINT ( 'NONE', ( 12.09728305149876300, -9.999999999999994700, 15.42873273449079700 ) ) ; +#3676 = CARTESIAN_POINT ( 'NONE', ( 20.40808894866210800, 9.663611965802843400, 17.62010025155296900 ) ) ; +#3677 = CARTESIAN_POINT ( 'NONE', ( 23.97750072456160800, 8.982932001462312900, 15.63597347400840900 ) ) ; +#3678 = CARTESIAN_POINT ( 'NONE', ( 12.79542630866879400, -9.999999999999998200, 15.42913002260927300 ) ) ; +#3679 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3680 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 4.999999999999995600, 8.356123307600421000E-016 ) ) ; +#3681 = CARTESIAN_POINT ( 'NONE', ( 8.969156200587651300, 11.22190382075141600, -21.68475368941396700 ) ) ; +#3682 = CARTESIAN_POINT ( 'NONE', ( 10.21874841253217300, 20.89586979920965600, -60.27843168674925800 ) ) ; +#3683 = CARTESIAN_POINT ( 'NONE', ( 13.14786419743683000, -9.999999999999998200, 15.39168111595776100 ) ) ; +#3684 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000006500, -88.81885793164890700, -72.39384004447242700 ) ) ; +#3685 = ORIENTED_EDGE ( 'NONE', *, *, #526, .F. ) ; +#3686 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2803, #2869, #2664, #2655 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002391329735993465600 ), + .UNSPECIFIED. ) ; +#3687 = ORIENTED_EDGE ( 'NONE', *, *, #606, .F. ) ; +#3688 = ORIENTED_EDGE ( 'NONE', *, *, #1134, .F. ) ; +#3689 = CARTESIAN_POINT ( 'NONE', ( 9.193623537962107400, 23.93284067572491100, -63.24122703612997000 ) ) ; +#3690 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -3.673940397442059200E-015, -2.499999999999999600 ) ) ; +#3691 = CARTESIAN_POINT ( 'NONE', ( 14.21572941021854900, -8.460904434018122100, 18.85664821965721300 ) ) ; +#3692 = EDGE_LOOP ( 'NONE', ( #2152, #2355, #3156, #3232, #2644, #3149, #3099, #3151, #3162, #3181, #3187, #3240, #3266 ) ) ; +#3693 = VERTEX_POINT ( 'NONE', #1629 ) ; +#3694 = CARTESIAN_POINT ( 'NONE', ( 8.955432609591111900, 13.61026840981793400, -21.05223988558610800 ) ) ; +#3695 = CARTESIAN_POINT ( 'NONE', ( 10.86902733198073000, 25.16700604650234400, -59.36976151861569700 ) ) ; +#3696 = CARTESIAN_POINT ( 'NONE', ( 7.711165969812802800, 5.261965970760947200, 20.42893218746408800 ) ) ; +#3697 = EDGE_LOOP ( 'NONE', ( #2241, #2248, #2250, #2254, #2288, #2299, #2307, #2311, #2335, #2340, #2353, #2376, #2381 ) ) ; +#3698 = AXIS2_PLACEMENT_3D ( 'NONE', #1084, #2922, #801 ) ; +#3699 = ORIENTED_EDGE ( 'NONE', *, *, #526, .T. ) ; +#3700 = CARTESIAN_POINT ( 'NONE', ( 10.00751765349294000, 20.93800755568990000, -60.19547818187656700 ) ) ; +#3701 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -2.312964634635743900E-016, -1.000000000000000000 ) ) ; +#3702 = ORIENTED_EDGE ( 'NONE', *, *, #544, .F. ) ; +#3703 = CARTESIAN_POINT ( 'NONE', ( 5.229183370032435700, -0.5957004974828499200, 20.26158496133534100 ) ) ; +#3704 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025145200, 0.9659258262890699800 ) ) ; +#3705 = CARTESIAN_POINT ( 'NONE', ( 7.809141600716759300, 13.07160706031921100, -18.92952852289998900 ) ) ; +#3706 = CARTESIAN_POINT ( 'NONE', ( 3.093831621983527100, 4.224787369891972200, 18.28922733968508000 ) ) ; +#3707 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 4.999999999999996400, 7.499999999999999100 ) ) ; +#3708 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -10.00000000000000400, -7.499999999999995600 ) ) ; +#3709 = VECTOR ( 'NONE', #1555, 999.9999999999998900 ) ; +#3710 = CARTESIAN_POINT ( 'NONE', ( 1.647059527481996100, -9.999999999998856000, 17.27481323466014700 ) ) ; +#3711 = LINE ( 'NONE', #1278, #1388 ) ; +#3712 = AXIS2_PLACEMENT_3D ( 'NONE', #2996, #3293, #873 ) ; +#3713 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3714 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3290, #3359, #3260 ), + ( #3253, #3238, #3222 ), + ( #3211, #3199, #3188 ), + ( #3178, #3169, #3159 ), + ( #3141, #3131, #3120 ), + ( #3107, #3094, #3084 ), + ( #3072, #3055, #3049 ), + ( #3040, #3036, #3027 ), + ( #3022, #849, #838 ), + ( #824, #3010, #2991 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.002798944752301212500, 0.004802082986021324500, 0.006805221219741437000, 0.008808359453461549500, 0.01081149768718166200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8164965809277255900, 1.000000000000000000), + ( 1.000000000000000000, 0.8299119873344105200, 1.000000000000000000), + ( 1.000000000000000000, 0.8388858379261025000, 1.000000000000000000), + ( 1.000000000000000000, 0.8508566525234372300, 1.000000000000000000), + ( 1.000000000000000000, 0.8537825322446824800, 1.000000000000000000), + ( 1.000000000000000000, 0.8538152745576675900, 1.000000000000000000), + ( 1.000000000000000000, 0.8509446782480739600, 1.000000000000000000), + ( 1.000000000000000000, 0.8390459016805867900, 1.000000000000000000), + ( 1.000000000000000000, 0.8300755868377687200, 1.000000000000000000), + ( 1.000000000000000000, 0.8164965809277259200, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3715 = CARTESIAN_POINT ( 'NONE', ( 5.690350006525942900, 2.309513708154050400, 20.38186263022744900 ) ) ; +#3716 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000100, -0.6835232199034037000, -24.65261298917794600 ) ) ; +#3717 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3718 = CARTESIAN_POINT ( 'NONE', ( 12.44919999999999800, 19.65546469306329100, -53.19394306809147800 ) ) ; +#3719 = CARTESIAN_POINT ( 'NONE', ( 8.771411272735246500, 11.24791869820000300, -21.78893845415915500 ) ) ; +#3720 = CARTESIAN_POINT ( 'NONE', ( 4.501890410764101300, 2.819904684325423200, 19.09702795464568200 ) ) ; +#3721 = CARTESIAN_POINT ( 'NONE', ( 20.69635923211291100, 1.451838494098422400, 19.13427333493850900 ) ) ; +#3722 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000000300, -1.505759517047178300, -23.64527242200713200 ) ) ; +#3723 = CARTESIAN_POINT ( 'NONE', ( 5.782533333333336900, -6.666666666666667900, 18.68082896311803500 ) ) ; +#3724 = CARTESIAN_POINT ( 'NONE', ( 5.201887282158338600, -0.2956260051130872300, 20.25268728215857200 ) ) ; +#3725 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 20.42893218813456700 ) ) ; +#3726 = ORIENTED_EDGE ( 'NONE', *, *, #2373, .F. ) ; +#3727 = DIRECTION ( 'NONE', ( -0.6484729204542121200, 0.0000000000000000000, -0.7612377233411290500 ) ) ; +#3728 = CARTESIAN_POINT ( 'NONE', ( 8.758611309744750900, 13.63968153669814900, -21.15556975959741200 ) ) ; +#3729 = CARTESIAN_POINT ( 'NONE', ( 8.638246941752143500, 24.04512901772639600, -62.84416434224099400 ) ) ; +#3730 = VERTEX_POINT ( 'NONE', #1659 ) ; +#3731 = AXIS2_PLACEMENT_3D ( 'NONE', #33, #1766, #3589 ) ; +#3732 = CARTESIAN_POINT ( 'NONE', ( 2.449200000000006000, 2.371521134422848800, -31.35343597986623700 ) ) ; +#3733 = CLOSED_SHELL ( 'NONE', ( #2060, #682, #2622, #3451, #1666, #591, #1735, #2691, #2567, #2076, #3063, #3179, #2982, #1264, #3349, #2505, #1081, #98, #929, #2770, #3158, #507, #1939, #2707, #3287, #2896, #866, #1356, #1824, #1435, #2279, #2252, #3636, #1625, #743, #1990, #1645, #1760, #2878, #1033, #805, #2807, #2581, #1172, #1608, #2382, #74, #2295, #1455, #573, #2999, #1947, #788, #2858, #1343, #1375, #651, #462, #364, #770, #1157, #2450, #1319, #1070, #490, #409, #3265, #2607, #2318, #3166, #2238, #2139, #1972, #472, #2596, #450, #1047, #2912, #754, #3197 ) ) ; +#3734 = VERTEX_POINT ( 'NONE', #1639 ) ; +#3735 = CARTESIAN_POINT ( 'NONE', ( 8.734940245512341100, -6.387680343361484600, 20.12007448808941100 ) ) ; +#3736 = ORIENTED_EDGE ( 'NONE', *, *, #408, .F. ) ; +#3737 = CARTESIAN_POINT ( 'NONE', ( 10.36853531123341700, 24.91703333056369400, -59.29810621713834700 ) ) ; +#3738 = ORIENTED_EDGE ( 'NONE', *, *, #2010, .T. ) ; +#3739 = CARTESIAN_POINT ( 'NONE', ( 7.449200000000000300, -1.505759517047178300, -23.64527242200713200 ) ) ; +#3740 = DIRECTION ( 'NONE', ( -1.734723475976808100E-016, 8.881784197001252300E-016, 1.000000000000000000 ) ) ; +#3741 = CARTESIAN_POINT ( 'NONE', ( 7.545481696989388500, 13.10602445555262800, -19.06489883926009900 ) ) ; +#3742 = EDGE_LOOP ( 'NONE', ( #1145, #2904, #870, #907 ) ) ; +#3743 = CARTESIAN_POINT ( 'NONE', ( 9.590985206292744500, 21.01802675634740300, -60.01116848328754100 ) ) ; +#3744 = DIRECTION ( 'NONE', ( 0.4744334482306241100, 0.8802913740347566600, -4.115054202171454700E-017 ) ) ; +#3745 = EDGE_LOOP ( 'NONE', ( #1640, #2488, #3268, #959 ) ) ; +#3746 = ORIENTED_EDGE ( 'NONE', *, *, #1175, .T. ) ; +#3747 = CARTESIAN_POINT ( 'NONE', ( 22.44919999999999800, 22.07027925878596300, -52.54689545533519600 ) ) ; +#3748 = ORIENTED_EDGE ( 'NONE', *, *, #1548, .F. ) ; +#3749 = VECTOR ( 'NONE', #734, 1000.000000000000000 ) ; +#3750 = CARTESIAN_POINT ( 'NONE', ( 8.364514874087765500, 24.09634009759277600, -62.62494340410474100 ) ) ; +#3751 = CARTESIAN_POINT ( 'NONE', ( 14.82168961384193700, 7.874531352090929900, 19.30901073776880500 ) ) ; +#3752 = DIRECTION ( 'NONE', ( -1.000000000000000000, 3.457580948128860000E-017, -1.290386776969941900E-016 ) ) ; +#3753 = DIRECTION ( 'NONE', ( 0.7499999999999988900, 0.1711927069771166100, -0.6388998803238649100 ) ) ; +#3754 = LINE ( 'NONE', #3690, #1425 ) ; +#3755 = CARTESIAN_POINT ( 'NONE', ( 8.194077489218454200, 11.33328059915200300, -22.12614356172328600 ) ) ; +#3756 = CARTESIAN_POINT ( 'NONE', ( 10.10676367974650000, 24.79683884536259000, -59.24295650635590200 ) ) ; +#3757 = CARTESIAN_POINT ( 'NONE', ( 2.907542976344684500, 1.101497445916973700, -28.63877344728785000 ) ) ; +#3758 = AXIS2_PLACEMENT_3D ( 'NONE', #641, #355, #2129 ) ; +#3759 = CARTESIAN_POINT ( 'NONE', ( -0.2545056748788031000, 10.00000000000000200, 17.42727761131465400 ) ) ; +#3760 = CARTESIAN_POINT ( 'NONE', ( 16.53256471042152500, 10.00000000000000200, 17.44519991596168400 ) ) ; +#3761 = CARTESIAN_POINT ( 'NONE', ( 7.106893188236284700, -6.333113695536376900, 19.22467256674205400 ) ) ; +#3762 = CARTESIAN_POINT ( 'NONE', ( 5.834821722338494600, 21.59660753133214000, -60.43838676525949400 ) ) ; +#3763 = CARTESIAN_POINT ( 'NONE', ( 8.184687841079217200, 13.73532693979806200, -21.48933748692507400 ) ) ; +#3764 = CARTESIAN_POINT ( 'NONE', ( 9.385686155659179500, 21.05593127599736300, -59.90980872323336100 ) ) ; +#3765 = CARTESIAN_POINT ( 'NONE', ( 2.763299631494303900, 1.659954904067642000, 18.42357825588017700 ) ) ; +#3766 = AXIS2_PLACEMENT_3D ( 'NONE', #1219, #3054, #2449 ) ; +#3767 = EDGE_LOOP ( 'NONE', ( #826, #862, #912, #965 ) ) ; +#3768 = CARTESIAN_POINT ( 'NONE', ( 7.823969770388553800, 24.17636548788713900, -62.14599337717076100 ) ) ; +#3769 = CARTESIAN_POINT ( 'NONE', ( 18.84140348578322500, 7.380613588928169700, 18.49750234294718600 ) ) ; +#3770 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -18.31287684118414600, -36.48065332244480900 ) ) ; +#3771 = EDGE_LOOP ( 'NONE', ( #3387, #3424 ) ) ; +#3772 = ORIENTED_EDGE ( 'NONE', *, *, #1649, .T. ) ; +#3773 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.224646799147353200E-016, 0.0000000000000000000 ) ) ; +#3774 = CARTESIAN_POINT ( 'NONE', ( 9.571301768446545600, 24.55983271484690500, -59.08803132424193900 ) ) ; +#3775 = CARTESIAN_POINT ( 'NONE', ( 1.232595164407831400E-031, 4.999999999999997300, 7.499999999999996400 ) ) ; +#3776 = AXIS2_PLACEMENT_3D ( 'NONE', #3684, #1991, #222 ) ; +#3777 = ORIENTED_EDGE ( 'NONE', *, *, #1377, .F. ) ; +#3778 = ORIENTED_EDGE ( 'NONE', *, *, #2296, .F. ) ; +#3779 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3780 = EDGE_LOOP ( 'NONE', ( #2387, #2393 ) ) ; +#3781 = AXIS2_PLACEMENT_3D ( 'NONE', #1879, #1673, #3501 ) ; +#3782 = CARTESIAN_POINT ( 'NONE', ( 8.980277327698056300, 21.12020710469045400, -59.68953802631386200 ) ) ; +#3783 = VERTEX_POINT ( 'NONE', #1604 ) ; +#3784 = ORIENTED_EDGE ( 'NONE', *, *, #1780, .T. ) ; +#3785 = CARTESIAN_POINT ( 'NONE', ( 13.49313651056205600, -9.999999999999998200, 15.32111431373024000 ) ) ; +#3786 = CARTESIAN_POINT ( 'NONE', ( 2.449200000000004700, 15.34856020936185000, -27.46109844868017500 ) ) ; +#3787 = CARTESIAN_POINT ( 'NONE', ( 6.775703318939813300, 13.21857897336255200, -19.50313378119241400 ) ) ; +#3788 = AXIS2_PLACEMENT_3D ( 'NONE', #3180, #406, #3173 ) ; +#3789 = CARTESIAN_POINT ( 'NONE', ( -0.2580228017279050400, 5.084591110718487400, 17.51037509623230900 ) ) ; +#3790 = ORIENTED_EDGE ( 'NONE', *, *, #1252, .F. ) ; +#3791 = CARTESIAN_POINT ( 'NONE', ( 3.407589497283749900, -5.263558899163266200, 18.20335045468318900 ) ) ; +#3792 = LINE ( 'NONE', #1826, #1863 ) ; +#3793 = FACE_OUTER_BOUND ( 'NONE', #1462, .T. ) ; +#3795 = CARTESIAN_POINT ( 'NONE', ( 7.558346523863621200, 24.20488062238498700, -61.88709313753964400 ) ) ; +#3794 = VECTOR ( 'NONE', #1725, 1000.000000000000000 ) ; +#3796 = CARTESIAN_POINT ( 'NONE', ( 15.95855830924072200, 7.767890630072865400, 19.02018977847778600 ) ) ; +#3797 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #894, #900, #875, #869, #848, #845, #836, #831 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001913208264031159400, 0.003826416528062318700, 0.007652833056124637400 ), + .UNSPECIFIED. ) ; +#3798 = AXIS2_PLACEMENT_3D ( 'NONE', #1266, #1057, #1352 ) ; +#3799 = FACE_OUTER_BOUND ( 'NONE', #1184, .T. ) ; +#3800 = CARTESIAN_POINT ( 'NONE', ( 9.299702216447340000, 24.44339094876691800, -58.99098694554794500 ) ) ; +#3801 = DIRECTION ( 'NONE', ( 1.325001034533938600E-016, -1.588080900582084500E-016, -1.000000000000000000 ) ) ; +#3802 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #876, #1445, #38, #1768, #2411, #2717, #607, #891 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001305569381220914300, 0.002611138762441828700, 0.005222277524883647000 ), + .UNSPECIFIED. ) ; +#3803 = AXIS2_PLACEMENT_3D ( 'NONE', #2191, #188, #702 ) ; +#3804 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999995800, -10.00000000000000200, 7.500000000000000000 ) ) ; +#3805 = CARTESIAN_POINT ( 'NONE', ( 12.44920000000000100, -1.925929944387235900E-031, 20.42893218813456700 ) ) ; +#3806 = CARTESIAN_POINT ( 'NONE', ( 8.781059892904092800, 21.14637369439318000, -59.57101422259540900 ) ) ; +#3807 = CARTESIAN_POINT ( 'NONE', ( 21.32708274542868700, 5.957257645293664100, 18.11089526564361300 ) ) ; +#3808 = AXIS2_PLACEMENT_3D ( 'NONE', #977, #120, #2176 ) ; +#3809 = CARTESIAN_POINT ( 'NONE', ( 24.89840000000000200, -3.061616997868382300E-015, -12.50000000000000000 ) ) ; +#3810 = CARTESIAN_POINT ( 'NONE', ( 6.785237791829165300, 24.23669999368375400, -61.06625747338478800 ) ) ; +#3811 = CARTESIAN_POINT ( 'NONE', ( 22.44919999999999400, 15.34856020936185100, -27.46109844868017900 ) ) ; +#3812 = EDGE_LOOP ( 'NONE', ( #296, #3427, #177, #3565 ) ) ; +#3813 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 6.123233995736761400E-016, 22.50000000000003200 ) ) ; +#3814 = CARTESIAN_POINT ( 'NONE', ( 20.72000887356926000, -1.261208370644516500, 19.13580928789026500 ) ) ; +#3815 = CARTESIAN_POINT ( 'NONE', ( 8.094637983699096000, -9.999999999999998200, 14.49862145917808600 ) ) ; +#3816 = CARTESIAN_POINT ( 'NONE', ( 8.520253672280807300, 24.09756725726486300, -58.65322126686819400 ) ) ; +#3817 = ORIENTED_EDGE ( 'NONE', *, *, #168, .F. ) ; +#3818 = AXIS2_PLACEMENT_3D ( 'NONE', #2750, #347, #3624 ) ; +#3819 = CARTESIAN_POINT ( 'NONE', ( 21.84740814467321000, -6.560555125901016600, 17.80113295493918800 ) ) ; +#3820 = CARTESIAN_POINT ( 'NONE', ( 5.201887282158691200, 5.894115778564526800E-012, 20.25268728215868900 ) ) ; +#3821 = CARTESIAN_POINT ( 'NONE', ( 7.830238917872949700, 11.39986512769678700, -22.38362604191514300 ) ) ; +#3822 = EDGE_LOOP ( 'NONE', ( #2589, #2600, #2601, #2631, #2639 ) ) ; +#3823 = VERTEX_POINT ( 'NONE', #1587 ) ; +#3824 = CARTESIAN_POINT ( 'NONE', ( 7.834988583021584900, 21.19042934331405800, -58.92250917088187400 ) ) ; +#3825 = CARTESIAN_POINT ( 'NONE', ( 18.17322024036973700, -7.159141310377145300, 18.80105982760489200 ) ) ; +#3826 = AXIS2_PLACEMENT_3D ( 'NONE', #315, #818, #2105 ) ; +#3827 = CARTESIAN_POINT ( 'NONE', ( 17.40998370824614800, 11.47788851493754700, -22.67481328856048300 ) ) ; +#3828 = ORIENTED_EDGE ( 'NONE', *, *, #1717, .T. ) ; +#3829 = CARTESIAN_POINT ( 'NONE', ( 19.06357827766153400, 10.99260280537033400, -20.86370236426848700 ) ) ; +#3830 = ORIENTED_EDGE ( 'NONE', *, *, #1473, .F. ) ; +#3831 = ORIENTED_EDGE ( 'NONE', *, *, #2157, .T. ) ; +#3832 = AXIS2_PLACEMENT_3D ( 'NONE', #3045, #1214, #3339 ) ; +#3833 = CARTESIAN_POINT ( 'NONE', ( 8.201228343859117600, 21.19524571052526700, -59.19740476889646900 ) ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STEP/Handle.step b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Handle.step new file mode 100644 index 0000000..4a32c1e --- /dev/null +++ b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Handle.step @@ -0,0 +1,16760 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Handle.STEP', + '2013-11-10T07:45:49', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = CARTESIAN_POINT ( 'NONE', ( 36.02107222573479800, -30.86834426918924400, 25.64810687000567300 ) ) ; +#2 = CARTESIAN_POINT ( 'NONE', ( 27.92084560616665100, -28.05960037668652500, 27.34260980483862000 ) ) ; +#3 = CARTESIAN_POINT ( 'NONE', ( 39.68508404480298400, -20.17016724896167500, -14.74581063608891900 ) ) ; +#4 = VERTEX_POINT ( 'NONE', #5422 ) ; +#5 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -94.33857163534953800, 4.255063462585586500 ) ) ; +#6 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7 = VECTOR ( 'NONE', #7806, 999.9999999999998900 ) ; +#8 = CARTESIAN_POINT ( 'NONE', ( 13.86335888514214100, -21.86986047237197200, -25.99001742412982100 ) ) ; +#9 = CARTESIAN_POINT ( 'NONE', ( 2.908100691834461400, -9.999999999999996400, -22.16994175235314700 ) ) ; +#10 = CIRCLE ( 'NONE', #7953, 4.999999999999996400 ) ; +#11 = CARTESIAN_POINT ( 'NONE', ( 6.519244333631980300, -30.20443298959082400, 23.85302595065757800 ) ) ; +#12 = CARTESIAN_POINT ( 'NONE', ( 39.92827319142649900, -19.91519396282844300, 9.508037479410029700 ) ) ; +#13 = CARTESIAN_POINT ( 'NONE', ( 31.74784765645723900, -30.75069610193631000, 27.79306815312317600 ) ) ; +#14 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 12.00000000000000000, 25.00000000000000400 ) ) ; +#15 = CARTESIAN_POINT ( 'NONE', ( 11.54570590964739600, -30.35157412382696100, 27.17717429655420600 ) ) ; +#16 = CARTESIAN_POINT ( 'NONE', ( 25.83308423735438500, -100.0000000000000100, -38.36942826376122900 ) ) ; +#17 = CARTESIAN_POINT ( 'NONE', ( 12.34601072154614300, -12.49999999999999500, -20.28380232937148600 ) ) ; +#18 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 51.02052347080197600, -11.74043533514386100 ) ) ; +#19 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.734723475976807600E-016, -1.000000000000000000 ) ) ; +#20 = CARTESIAN_POINT ( 'NONE', ( 33.70771807355628600, -13.00917557935006000, -25.13601640783718900 ) ) ; +#21 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375000, -30.82654731344970900, 27.93780948130439900 ) ) ; +#22 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122091300, -0.1736481776669239500 ) ) ; +#23 = EDGE_CURVE ( 'NONE', #7948, #12805, #5493, .T. ) ; +#24 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#25 = FACE_OUTER_BOUND ( 'NONE', #12312, .T. ) ; +#26 = CARTESIAN_POINT ( 'NONE', ( 9.972545288903226900, -30.30550173079051400, 26.42951891441240200 ) ) ; +#27 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -12.50000000000001100, 9.327783369942686400 ) ) ; +#28 = ORIENTED_EDGE ( 'NONE', *, *, #95, .F. ) ; +#29 = CARTESIAN_POINT ( 'NONE', ( 43.99542252075629300, -8.010744466613370900, 18.20296685488479200 ) ) ; +#30 = CARTESIAN_POINT ( 'NONE', ( 5.024212822964841500, -29.61578065578448700, 21.75752964530119400 ) ) ; +#31 = CARTESIAN_POINT ( 'NONE', ( 37.22976747126126200, -30.93956578521952100, 24.50402298117230900 ) ) ; +#32 = CARTESIAN_POINT ( 'NONE', ( 21.71401550145860800, -33.38452916951362700, 26.50167657627804700 ) ) ; +#33 = CARTESIAN_POINT ( 'NONE', ( 33.83900488020866200, -30.22368520948189300, 26.99669155839862000 ) ) ; +#34 = CARTESIAN_POINT ( 'NONE', ( 33.51036078034097400, -20.47727147411910300, 20.46578027308956400 ) ) ; +#35 = LINE ( 'NONE', #2755, #10821 ) ; +#36 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37 = CARTESIAN_POINT ( 'NONE', ( 13.04427468357814800, -21.57117652174981300, -25.59995377813967100 ) ) ; +#38 = CARTESIAN_POINT ( 'NONE', ( 8.427586792916329700, -29.69313937385037100, 25.31298168465259100 ) ) ; +#39 = CARTESIAN_POINT ( 'NONE', ( 10.53000374465727900, -11.90228269180361500, 24.66457623650030600 ) ) ; +#40 = CARTESIAN_POINT ( 'NONE', ( 0.5282864514653364800, -11.05587446795781800, 8.090753770032506500 ) ) ; +#41 = CARTESIAN_POINT ( 'NONE', ( 44.47272127390723300, -11.05421153035073800, -11.69353427186087100 ) ) ; +#42 = CARTESIAN_POINT ( 'NONE', ( 38.03861766458703600, -31.01536219384018600, 22.20483729806551000 ) ) ; +#43 = EDGE_CURVE ( 'NONE', #11004, #10734, #11699, .T. ) ; +#44 = CARTESIAN_POINT ( 'NONE', ( 38.34920883186312300, -30.85805853064792400, 22.85779258284994200 ) ) ; +#45 = FACE_OUTER_BOUND ( 'NONE', #104, .T. ) ; +#46 = CARTESIAN_POINT ( 'NONE', ( 35.76753338070131600, -29.75669218214944300, 25.85770431200855400 ) ) ; +#47 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -21.70442827258544200, -11.08526351193344300 ) ) ; +#48 = CARTESIAN_POINT ( 'NONE', ( 41.04178444220918500, -17.90966219457073900, -12.45805205832521000 ) ) ; +#49 = ORIENTED_EDGE ( 'NONE', *, *, #12021, .T. ) ; +#50 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000002800, -90.67527717999128400, -2.935316354368748400 ) ) ; +#51 = PLANE ( 'NONE', #9853 ) ; +#52 = CARTESIAN_POINT ( 'NONE', ( 11.86856265933632000, -21.11284394129248200, -24.93078098553029100 ) ) ; +#53 = CARTESIAN_POINT ( 'NONE', ( 13.17264159404111000, -20.77539050733608400, -25.27113395899304400 ) ) ; +#54 = ADVANCED_FACE ( 'NONE', ( #9014 ), #2107, .F. ) ; +#55 = CARTESIAN_POINT ( 'NONE', ( 7.025867212829929500, -29.15167086570440000, 23.70569152915238200 ) ) ; +#56 = LINE ( 'NONE', #286, #4775 ) ; +#57 = CARTESIAN_POINT ( 'NONE', ( 39.93485920681153100, -19.91915689089174900, 9.437843025336162500 ) ) ; +#58 = CARTESIAN_POINT ( 'NONE', ( 31.74748447855993300, -30.83006683959191100, 27.77960117483147000 ) ) ; +#59 = CARTESIAN_POINT ( 'NONE', ( 1.049262658268228700, -8.074363754075635700, 17.21664755057783200 ) ) ; +#60 = CARTESIAN_POINT ( 'NONE', ( 11.73353791398370500, -30.88153519789739900, 27.19554807189778200 ) ) ; +#61 = AXIS2_PLACEMENT_3D ( 'NONE', #3182, #10357, #6253 ) ; +#62 = CARTESIAN_POINT ( 'NONE', ( 33.28778345452907000, -100.0000000000000100, -35.17784268884943800 ) ) ; +#63 = CARTESIAN_POINT ( 'NONE', ( 34.23629136916074600, -12.34547223009419300, 24.58643465046051100 ) ) ; +#64 = CARTESIAN_POINT ( 'NONE', ( 6.193076501072219700, -10.66968751444561600, 23.37864988781284800 ) ) ; +#65 = CARTESIAN_POINT ( 'NONE', ( 9.145009750709020200, -26.51077841581138400, 17.49351486140190200 ) ) ; +#66 = CARTESIAN_POINT ( 'NONE', ( 34.27892814762135000, -12.96519585817089700, -25.00000000000386200 ) ) ; +#67 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344970900, 27.93780948130441300 ) ) ; +#68 = CARTESIAN_POINT ( 'NONE', ( 40.96900849343098400, -18.06198301313795800, -11.44988105978824300 ) ) ; +#69 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70 = CARTESIAN_POINT ( 'NONE', ( 10.40279458308037000, -31.11437119724183400, 26.41082731082911600 ) ) ; +#71 = CARTESIAN_POINT ( 'NONE', ( 36.25470228449976400, -12.50000000000001100, 14.92899765196885700 ) ) ; +#72 = CARTESIAN_POINT ( 'NONE', ( 1.116726654787482100, -8.819214496735323600, -19.81245970533949200 ) ) ; +#73 = CARTESIAN_POINT ( 'NONE', ( 42.62972965417962700, -10.23353446373400600, 17.33526771243121800 ) ) ; +#74 = CARTESIAN_POINT ( 'NONE', ( 6.073269191784270900, -28.88521273440189000, 21.88490486508294800 ) ) ; +#75 = CARTESIAN_POINT ( 'NONE', ( 37.06800387282702000, -29.58133303290748700, 24.89519096472948000 ) ) ; +#76 = CARTESIAN_POINT ( 'NONE', ( 5.411282948082885900, -28.75469241002716500, 19.31687988924170800 ) ) ; +#77 = AXIS2_PLACEMENT_3D ( 'NONE', #1548, #8685, #2548 ) ; +#78 = CARTESIAN_POINT ( 'NONE', ( 33.86713449044008000, -30.64046953804271200, 26.98535781922071700 ) ) ; +#79 = CARTESIAN_POINT ( 'NONE', ( 33.81013182562888600, -27.02105893424607400, 19.16180118352902200 ) ) ; +#80 = LINE ( 'NONE', #6580, #10241 ) ; +#81 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 8.200000000000013500, 0.0000000000000000000 ) ) ; +#82 = CARTESIAN_POINT ( 'NONE', ( 11.48545332834880400, -20.95769452059914100, -24.69373341966688800 ) ) ; +#83 = CARTESIAN_POINT ( 'NONE', ( 8.681241079054938600, -31.00524188226458500, 25.28994296711428500 ) ) ; +#84 = CARTESIAN_POINT ( 'NONE', ( 37.12147182881711400, -7.530157800831055700, -29.16707855792381200 ) ) ; +#85 = CARTESIAN_POINT ( 'NONE', ( -1.574016622300025900E-013, -9.989626853423597900, 8.495541252988529000 ) ) ; +#86 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999673200, -9.971011864228103100, -12.33461410119186400 ) ) ; +#87 = CARTESIAN_POINT ( 'NONE', ( 34.15576177498189700, -30.34220567213731800, 26.95722281948363300 ) ) ; +#88 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8978, #12912, #5877, #11957, #4843, #10955, #3814, #9939, #2807, #8937, #1794, #7915, #798, #6880 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.003841791491976258100, 0.005762687237964378100, 0.007683582983952498900, 0.01152537447592874200, 0.01344627022191686300, 0.01536716596790498400 ), + .UNSPECIFIED. ) ; +#89 = CARTESIAN_POINT ( 'NONE', ( 38.68743438729931900, -29.56628221881074500, 23.43960896618007100 ) ) ; +#90 = CARTESIAN_POINT ( 'NONE', ( 5.654097303420917900, -28.83317906846841100, 20.54706853675487100 ) ) ; +#91 = CIRCLE ( 'NONE', #8021, 7.500000000000000000 ) ; +#92 = CARTESIAN_POINT ( 'NONE', ( 35.88987264433635000, -30.59399369682324000, 25.89357159790107900 ) ) ; +#93 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -97.51638471114853200, 22.06850012136330700 ) ) ; +#94 = CARTESIAN_POINT ( 'NONE', ( 39.99641787133737800, -22.33271877578490800, -11.60985583246706600 ) ) ; +#95 = EDGE_CURVE ( 'NONE', #2958, #4250, #9218, .T. ) ; +#96 = CARTESIAN_POINT ( 'NONE', ( 5.358001470925952200, -29.13703568385918200, 21.71015431889281900 ) ) ; +#97 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#98 = CARTESIAN_POINT ( 'NONE', ( 10.74301226282765500, -20.64321778860103500, -24.19879525345661600 ) ) ; +#99 = CARTESIAN_POINT ( 'NONE', ( 6.800233741758055400, -30.54723857275983800, 23.92228383239417500 ) ) ; +#100 = CARTESIAN_POINT ( 'NONE', ( 39.94204464848498800, -19.92367684001599300, 9.357822604632110200 ) ) ; +#101 = CARTESIAN_POINT ( 'NONE', ( 31.64586072704261700, -30.74726535041322300, 27.82600897523278900 ) ) ; +#102 = CARTESIAN_POINT ( 'NONE', ( 0.3050857232863096200, -6.738788200191517100, 17.33438955788618000 ) ) ; +#103 = CARTESIAN_POINT ( 'NONE', ( 11.73353624149094500, -30.52102053954525100, 27.25911787048447700 ) ) ; +#104 = EDGE_LOOP ( 'NONE', ( #7205, #7848, #8322, #9113 ) ) ; +#105 = VERTEX_POINT ( 'NONE', #5636 ) ; +#106 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -99.99999999999998600, -25.63802908547507900 ) ) ; +#107 = CARTESIAN_POINT ( 'NONE', ( 31.33585845596858400, -15.71979956828589700, 23.99144501186661000 ) ) ; +#108 = LINE ( 'NONE', #8865, #2763 ) ; +#109 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#110 = CARTESIAN_POINT ( 'NONE', ( 8.455421874406697600, -21.29323942038722400, 17.51184880316220600 ) ) ; +#111 = CARTESIAN_POINT ( 'NONE', ( 34.86596466327480900, -12.91901939076304000, -25.00000000000000000 ) ) ; +#112 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -97.57596123493894400, 11.50239124669685400 ) ) ; +#113 = CARTESIAN_POINT ( 'NONE', ( 8.140298154015880500, -12.66450145553184500, 22.56341652955730100 ) ) ; +#114 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#115 = CARTESIAN_POINT ( 'NONE', ( 10.34599071199940600, -30.54611148719531900, 26.61789811345785500 ) ) ; +#116 = CARTESIAN_POINT ( 'NONE', ( 33.30850665730462600, -100.0000000000000300, 3.447248114129457500 ) ) ; +#117 = CARTESIAN_POINT ( 'NONE', ( 2.425039312449688700, -9.376712918905104400, -21.87573147861788700 ) ) ; +#118 = CARTESIAN_POINT ( 'NONE', ( 41.37517953100084600, -9.968106566912107200, 19.72660394707243000 ) ) ; +#119 = ORIENTED_EDGE ( 'NONE', *, *, #1783, .F. ) ; +#120 = CARTESIAN_POINT ( 'NONE', ( 5.105251620975840500, -29.97767281732729600, 21.80400873106909300 ) ) ; +#121 = CARTESIAN_POINT ( 'NONE', ( 37.23091951315869600, -30.60569427929231900, 24.89450576091412900 ) ) ; +#122 = ORIENTED_EDGE ( 'NONE', *, *, #2232, .T. ) ; +#123 = CARTESIAN_POINT ( 'NONE', ( 5.000380676440020300, -27.18468536292479200, 7.381868651763709500 ) ) ; +#124 = ADVANCED_FACE ( 'NONE', ( #897 ), #5653, .T. ) ; +#125 = EDGE_CURVE ( 'NONE', #4202, #12966, #11391, .T. ) ; +#126 = CARTESIAN_POINT ( 'NONE', ( 33.83908184535879800, -31.07055817538824300, 26.84753972172613200 ) ) ; +#127 = CARTESIAN_POINT ( 'NONE', ( 39.21318155324711100, -28.85456251044366400, 21.04573382848031200 ) ) ; +#128 = CARTESIAN_POINT ( 'NONE', ( 10.03220454034422500, -20.32149963875677700, -23.67186603788616800 ) ) ; +#129 = ORIENTED_EDGE ( 'NONE', *, *, #3577, .F. ) ; +#130 = ORIENTED_EDGE ( 'NONE', *, *, #2306, .F. ) ; +#131 = CARTESIAN_POINT ( 'NONE', ( 8.582949012934712100, -30.12964192844170300, 25.57753126065528800 ) ) ; +#132 = CARTESIAN_POINT ( 'NONE', ( 43.71821251434455700, -7.786922583897241300, -21.43493977346599900 ) ) ; +#133 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -8.602226204941349200, 9.849421160365363200 ) ) ; +#134 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000700, -8.425937621305706700, -14.07490059585095400 ) ) ; +#135 = CARTESIAN_POINT ( 'NONE', ( 28.48932085058280700, -33.01221635565441700, 28.17851416907101800 ) ) ; +#136 = EDGE_LOOP ( 'NONE', ( #8557, #746, #1059, #9180, #1383, #12150 ) ) ; +#137 = CARTESIAN_POINT ( 'NONE', ( 38.50591871787934700, -30.67353363050669300, 23.17976583390454000 ) ) ; +#138 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6662, #12681, #1594, #8730, #2590, #9732, #3612, #10739, #4619, #11758, #5667, #12718, #6707, #630 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002270088740352756500, 0.003405133110529134700, 0.004540177480705513000, 0.006810266221058269500, 0.007945310591234648600, 0.009080354961411026000 ), + .UNSPECIFIED. ) ; +#139 = ORIENTED_EDGE ( 'NONE', *, *, #713, .F. ) ; +#140 = CARTESIAN_POINT ( 'NONE', ( 35.66349594819618600, -29.72174652914825500, 25.90376237998709300 ) ) ; +#141 = CARTESIAN_POINT ( 'NONE', ( 11.79274569009578900, -10.54301265032066200, -25.04912495590295800 ) ) ; +#142 = VERTEX_POINT ( 'NONE', #5463 ) ; +#143 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -8.819660112500978100, 25.00000000000000000 ) ) ; +#144 = DIRECTION ( 'NONE', ( -0.01900744305038393500, -0.9998193422357293200, 0.0000000000000000000 ) ) ; +#145 = CARTESIAN_POINT ( 'NONE', ( 34.55489362354534700, -17.89297912286089000, -24.56204300159971500 ) ) ; +#146 = CARTESIAN_POINT ( 'NONE', ( 6.933264214544453600, -29.48189322012581600, 24.00414798255500400 ) ) ; +#147 = CARTESIAN_POINT ( 'NONE', ( 39.94824282129273700, -19.92788642939879700, 9.283323966833974000 ) ) ; +#148 = CARTESIAN_POINT ( 'NONE', ( 31.64466227462576200, -30.81015804529120300, 27.81627900129962300 ) ) ; +#149 = CARTESIAN_POINT ( 'NONE', ( 11.84037730070973100, -30.98829039414940200, 27.20253318996895700 ) ) ; +#150 = CARTESIAN_POINT ( 'NONE', ( 28.71119710691328200, -17.90948283769394000, 23.60534477226405800 ) ) ; +#151 = CARTESIAN_POINT ( 'NONE', ( 39.03339731214848700, -30.51784945095451800, 21.46706999200636500 ) ) ; +#152 = ORIENTED_EDGE ( 'NONE', *, *, #5229, .T. ) ; +#153 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#154 = CARTESIAN_POINT ( 'NONE', ( 9.424910467733127500, -26.59680773750551500, 17.75927519464720900 ) ) ; +#155 = CARTESIAN_POINT ( 'NONE', ( 33.64771066131382300, -13.41914980538243500, -25.15601430610503200 ) ) ; +#156 = ORIENTED_EDGE ( 'NONE', *, *, #11838, .T. ) ; +#157 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -97.04531648070940300, 16.23785755017193500 ) ) ; +#158 = CARTESIAN_POINT ( 'NONE', ( 1.225467115683178200, -8.913268047234110400, 16.51779429103006100 ) ) ; +#159 = CARTESIAN_POINT ( 'NONE', ( 18.50664919057090800, -30.65936817455452300, 28.85719598643633400 ) ) ; +#160 = CARTESIAN_POINT ( 'NONE', ( 10.40564686620539800, -30.01797760844942100, 26.59879217440815300 ) ) ; +#161 = CARTESIAN_POINT ( 'NONE', ( 28.28987907430277500, -12.50000000000001100, 21.63952665110490900 ) ) ; +#162 = CARTESIAN_POINT ( 'NONE', ( 38.53667269644571300, -9.292026482437963300, -24.87822258655939200 ) ) ; +#163 = CARTESIAN_POINT ( 'NONE', ( 41.62781516889095500, -9.729230643683044000, 22.68806086731494200 ) ) ; +#164 = CARTESIAN_POINT ( 'NONE', ( 6.018778885044390800, -28.93157887654969300, 21.99475496051982000 ) ) ; +#165 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#166 = CARTESIAN_POINT ( 'NONE', ( 36.65246260073190900, -29.45743020168593100, 25.10429545382611500 ) ) ; +#167 = PRODUCT ( 'Handle', 'Handle', '', ( #1119 ) ) ; +#168 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #5900, #6902, #2880 ), + ( #10014, #3883, #11025 ), + ( #4918, #12025, #5944 ), + ( #12978, #7000, #907 ), + ( #8031, #1915, #9050 ), + ( #2924, #10052, #3927 ), + ( #11070, #4959, #12067 ), + ( #5990, #13017, #7046 ), + ( #956, #8073, #1953 ), + ( #9094, #2971, #10093 ), + ( #3968, #11121, #4998 ), + ( #12105, #6036, #13061 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.003266684851033245300, 0.006533369702066490700, 0.008166712127583113800, 0.009800054553099735200, 0.01306673940413298100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.4973876566414013300, 1.000000000000000000), + ( 1.000000000000000000, 0.4966505654489975500, 1.000000000000000000), + ( 1.000000000000000000, 0.4960462789348582500, 1.000000000000000000), + ( 1.000000000000000000, 0.4949960241983701300, 1.000000000000000000), + ( 1.000000000000000000, 0.4945431919329104100, 1.000000000000000000), + ( 1.000000000000000000, 0.4940183942644271200, 1.000000000000000000), + ( 1.000000000000000000, 0.4938651039428843000, 1.000000000000000000), + ( 1.000000000000000000, 0.4936052424103748400, 1.000000000000000000), + ( 1.000000000000000000, 0.4934795259950684500, 1.000000000000000000), + ( 1.000000000000000000, 0.4931922496116531400, 1.000000000000000000), + ( 1.000000000000000000, 0.4931330375844375500, 1.000000000000000000), + ( 1.000000000000000000, 0.4931454283001431300, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#169 = ORIENTED_EDGE ( 'NONE', *, *, #7422, .T. ) ; +#170 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.734723475976807600E-016, -1.000000000000000000 ) ) ; +#171 = APPROVAL_PERSON_ORGANIZATION ( #2827, #1045, #12269 ) ; +#172 = ORIENTED_EDGE ( 'NONE', *, *, #12125, .F. ) ; +#173 = CARTESIAN_POINT ( 'NONE', ( 33.76556879772459000, -30.53251834260279200, 27.04393612864110700 ) ) ; +#174 = CARTESIAN_POINT ( 'NONE', ( 38.18600719573515100, -22.42838333628911900, 14.84957045941127000 ) ) ; +#175 = CARTESIAN_POINT ( 'NONE', ( 32.05765806766726900, -30.90298622704489200, 27.66588606496098600 ) ) ; +#176 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#177 = CARTESIAN_POINT ( 'NONE', ( 8.831557305282238700, -31.16392485376497500, 25.23928635205875500 ) ) ; +#178 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999997200, -9.999999999999998200, -11.53187062879840100 ) ) ; +#179 = CARTESIAN_POINT ( 'NONE', ( 0.7625950476911502700, -9.555617458719179800, 14.40532022112108900 ) ) ; +#180 = EDGE_LOOP ( 'NONE', ( #12026, #12167, #12342, #12481 ) ) ; +#181 = CARTESIAN_POINT ( 'NONE', ( 44.23644543136701700, -9.075034684760753500, -18.60975817957316300 ) ) ; +#182 = CARTESIAN_POINT ( 'NONE', ( 25.05794980690656700, -33.35025653084937100, 26.50741664928542800 ) ) ; +#183 = CARTESIAN_POINT ( 'NONE', ( 38.14529965576807100, -29.24600063071536100, 23.66424163267937800 ) ) ; +#184 = VECTOR ( 'NONE', #346, 1000.000000000000000 ) ; +#185 = EDGE_LOOP ( 'NONE', ( #2621, #10752, #597, #911, #6299, #6629 ) ) ; +#186 = CARTESIAN_POINT ( 'NONE', ( 35.80187650444800300, -30.41992288272254200, 25.99068937177695200 ) ) ; +#187 = CARTESIAN_POINT ( 'NONE', ( 10.30872306776905700, -18.83517830079299700, -24.26626528115960500 ) ) ; +#188 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -95.07596123493894400, 16.93034213569669400 ) ) ; +#189 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -5.000000000000000900, -23.00000000000000000 ) ) ; +#190 = CARTESIAN_POINT ( 'NONE', ( 34.96779545965576800, -20.32149963875691200, -23.67186603788613700 ) ) ; +#191 = ADVANCED_FACE ( 'NONE', ( #5955, #8708 ), #5378, .F. ) ; +#192 = CARTESIAN_POINT ( 'NONE', ( 7.132047390527900700, -30.89870812801635900, 23.74186698418730000 ) ) ; +#193 = CARTESIAN_POINT ( 'NONE', ( 39.96046865064291600, -19.93675064948058300, 9.126435239726316000 ) ) ; +#194 = CARTESIAN_POINT ( 'NONE', ( 31.64591638601155300, -30.86428144704000000, 27.80530129431726700 ) ) ; +#195 = CARTESIAN_POINT ( 'NONE', ( 42.57496068755036600, -9.376712918905076000, -21.87573147861786500 ) ) ; +#196 = CARTESIAN_POINT ( 'NONE', ( 11.82882823135931900, -30.66135729643341900, 27.28746379540465500 ) ) ; +#197 = CIRCLE ( 'NONE', #1378, 3.189999999999994200 ) ; +#198 = CARTESIAN_POINT ( 'NONE', ( 26.62042479813662200, -18.89371970326226700, 23.43179725745643100 ) ) ; +#199 = CARTESIAN_POINT ( 'NONE', ( 39.48060491160133300, -29.12341090383921800, 21.78116031133582800 ) ) ; +#200 = AXIS2_PLACEMENT_3D ( 'NONE', #2208, #9345, #3223 ) ; +#201 = CARTESIAN_POINT ( 'NONE', ( 5.786855322351299500, -28.85456704782220400, 21.04585812795002300 ) ) ; +#202 = CARTESIAN_POINT ( 'NONE', ( 39.93340811123432800, -29.93161321723734100, 21.57043883871747900 ) ) ; +#203 = CARTESIAN_POINT ( 'NONE', ( 44.35788021199987700, -10.38578659001500000, 12.25389328194874100 ) ) ; +#204 = CARTESIAN_POINT ( 'NONE', ( 20.00735423513284400, -27.96523496585093200, 27.45710953202296900 ) ) ; +#205 = CARTESIAN_POINT ( 'NONE', ( 34.70443398678840900, -11.81691135008658300, -25.00000000000000000 ) ) ; +#206 = EDGE_CURVE ( 'NONE', #1870, #8605, #7838, .T. ) ; +#207 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -12.60472266500385900, -10.22788370481685900 ) ) ; +#208 = CARTESIAN_POINT ( 'NONE', ( 10.54340273902816500, -30.69554222568320500, 26.68782056581795500 ) ) ; +#209 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, -3.189999999999994200 ) ) ; +#210 = CARTESIAN_POINT ( 'NONE', ( 36.32042385999280800, -12.60754707251358800, 23.02746293388665700 ) ) ; +#211 = LINE ( 'NONE', #9679, #7998 ) ; +#212 = CARTESIAN_POINT ( 'NONE', ( 5.579587302010137900, -30.37109752558686200, 21.79156022040360300 ) ) ; +#213 = DIRECTION ( 'NONE', ( -0.9997660285782026300, 0.01900642951097103800, 0.01032684551124478200 ) ) ; +#214 = AXIS2_PLACEMENT_3D ( 'NONE', #2438, #5518, #2488 ) ; +#215 = CARTESIAN_POINT ( 'NONE', ( 36.90704778134389100, -30.39209252342000400, 25.24763619943500700 ) ) ; +#216 = VERTEX_POINT ( 'NONE', #5186 ) ; +#217 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -99.99999999999998600, 6.630571736238761300 ) ) ; +#218 = CARTESIAN_POINT ( 'NONE', ( 25.97900769036126100, -19.13177623255703000, 23.38982146840796600 ) ) ; +#219 = CARTESIAN_POINT ( 'NONE', ( 33.75240470422718200, -30.97570368667851800, 26.93646163436021700 ) ) ; +#220 = CARTESIAN_POINT ( 'NONE', ( 39.55572743939751500, -26.40272598588442300, 10.75713877448677100 ) ) ; +#221 = CARTESIAN_POINT ( 'NONE', ( 9.017919602521590900, -21.06165040061684500, 18.20209392236335300 ) ) ; +#222 = CARTESIAN_POINT ( 'NONE', ( 42.49890297944508400, -9.240536455385902000, -23.55289141356945800 ) ) ; +#223 = CARTESIAN_POINT ( 'NONE', ( 25.15459685038170800, -21.17801275585938800, 30.64417503465986000 ) ) ; +#224 = CARTESIAN_POINT ( 'NONE', ( 8.649543837786797700, -30.38347873854635500, 25.62905498553898600 ) ) ; +#225 = CARTESIAN_POINT ( 'NONE', ( 2.580304160230419500, -95.07596123493894400, 5.716033726920952200 ) ) ; +#226 = CARTESIAN_POINT ( 'NONE', ( 30.25400913265075800, -9.999999999999996400, -31.17675479788709900 ) ) ; +#227 = EDGE_CURVE ( 'NONE', #2981, #3874, #8252, .T. ) ; +#228 = CARTESIAN_POINT ( 'NONE', ( -2.602085213965210600E-015, -6.252131189047994500, 17.24451462339023400 ) ) ; +#229 = CARTESIAN_POINT ( 'NONE', ( 6.421901350335531300, -7.775389581008391300, -25.00000000000001100 ) ) ; +#230 = EDGE_CURVE ( 'NONE', #2167, #9677, #9620, .T. ) ; +#231 = CARTESIAN_POINT ( 'NONE', ( 38.53629190509540300, -30.31976947441877400, 23.69844806541073700 ) ) ; +#232 = FACE_OUTER_BOUND ( 'NONE', #1251, .T. ) ; +#233 = CARTESIAN_POINT ( 'NONE', ( 35.67006952390652700, -31.15076478894042800, 25.66177074104880500 ) ) ; +#234 = CARTESIAN_POINT ( 'NONE', ( 17.00598469338223500, -97.51216685056925800, 21.91131304307401700 ) ) ; +#235 = CARTESIAN_POINT ( 'NONE', ( 30.45214325564060700, -95.07596123493894400, 16.25810049416936900 ) ) ; +#236 = CARTESIAN_POINT ( 'NONE', ( 42.62596422462360100, -9.203583637232355800, -23.43931091041651600 ) ) ; +#237 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#238 = CARTESIAN_POINT ( 'NONE', ( 26.04472917350689400, -39.49052192775857200, 19.80002530896175000 ) ) ; +#239 = CARTESIAN_POINT ( 'NONE', ( 6.805284797399300700, -29.94046933116616700, 24.18945812782872900 ) ) ; +#240 = CARTESIAN_POINT ( 'NONE', ( 39.96839973939791000, -19.94325326138361700, 9.011319364541439100 ) ) ; +#241 = CARTESIAN_POINT ( 'NONE', ( 31.43941805192829300, -30.81140407199349000, 27.87970263905796000 ) ) ; +#242 = CARTESIAN_POINT ( 'NONE', ( 43.61076857180878400, -9.190735605638181500, -19.99267485819951800 ) ) ; +#243 = CARTESIAN_POINT ( 'NONE', ( 12.13863640647219100, -30.98182730605890400, 27.33221565039875100 ) ) ; +#244 = CARTESIAN_POINT ( 'NONE', ( 44.99999999992535000, -5.277213488859862500, -19.46406287415203500 ) ) ; +#245 = CARTESIAN_POINT ( 'NONE', ( 39.48067969349539700, -30.32123312596693100, 21.56995963008182900 ) ) ; +#246 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, 1.200000000000005700 ) ) ; +#247 = CARTESIAN_POINT ( 'NONE', ( 34.25692533818022400, -13.39205116880032900, -25.00000000000000400 ) ) ; +#248 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.819660112500978100, 0.0000000000000000000 ) ) ; +#249 = CARTESIAN_POINT ( 'NONE', ( 5.353743677966143400, -29.14043941966739500, 21.70955414843462700 ) ) ; +#250 = CARTESIAN_POINT ( 'NONE', ( 10.58514629241812200, -30.10867729329924500, 26.70882526116041000 ) ) ; +#251 = CARTESIAN_POINT ( 'NONE', ( 26.60787804227268400, -28.81139146500177300, 29.17993098023158200 ) ) ; +#252 = CARTESIAN_POINT ( 'NONE', ( 0.4346169943755460700, -7.119247946883515300, -20.19244089280231300 ) ) ; +#253 = CARTESIAN_POINT ( 'NONE', ( 36.38023696883775000, -9.095086894287531400, 25.32428663018135100 ) ) ; +#254 = CARTESIAN_POINT ( 'NONE', ( 5.579559329660441800, -29.15213649708559600, 22.00494221250295400 ) ) ; +#255 = CARTESIAN_POINT ( 'NONE', ( 39.98946637937395800, -19.96453072450357500, 8.634346169802912000 ) ) ; +#256 = CARTESIAN_POINT ( 'NONE', ( 15.55161109599408900, -22.45567018723297200, -26.63933883521032400 ) ) ; +#257 = CARTESIAN_POINT ( 'NONE', ( 36.65186069325597600, -31.14500885516093500, 24.80598916406733100 ) ) ; +#258 = CARTESIAN_POINT ( 'NONE', ( 13.69896521564827900, -100.0000000000000100, 4.926333178542761500 ) ) ; +#259 = CARTESIAN_POINT ( 'NONE', ( 31.12926194729783100, -19.20751489570321300, 22.04780536715696800 ) ) ; +#260 = ADVANCED_FACE ( 'NONE', ( #582 ), #6905, .T. ) ; +#261 = AXIS2_PLACEMENT_3D ( 'NONE', #8114, #1995, #9130 ) ; +#262 = CARTESIAN_POINT ( 'NONE', ( 33.55707637806156600, -30.38713722287496600, 27.13552140411890800 ) ) ; +#263 = CARTESIAN_POINT ( 'NONE', ( 9.994512679048293400, -26.76023159466107200, 18.25988797239272200 ) ) ; +#264 = ORIENTED_EDGE ( 'NONE', *, *, #12506, .T. ) ; +#265 = EDGE_LOOP ( 'NONE', ( #6993, #7086, #7125, #7151 ) ) ; +#266 = CARTESIAN_POINT ( 'NONE', ( 42.75475702109320500, -9.143739168152215800, -23.33604941288821900 ) ) ; +#267 = CARTESIAN_POINT ( 'NONE', ( 12.13171978914510500, -30.63014557391233700, 27.41240378754777000 ) ) ; +#268 = CARTESIAN_POINT ( 'NONE', ( 8.832015995261523100, -29.58535059097360800, 25.51699767247386000 ) ) ; +#269 = CIRCLE ( 'NONE', #11227, 1.200000000000012600 ) ; +#270 = CARTESIAN_POINT ( 'NONE', ( 35.93898173669020900, -20.59706617870513400, -22.11137782829435100 ) ) ; +#271 = CARTESIAN_POINT ( 'NONE', ( -4.002612138012543700E-014, -10.00006296916637500, -11.51700385283722600 ) ) ; +#272 = CARTESIAN_POINT ( 'NONE', ( 40.27311857753343800, -9.830153432112343400, 25.00000000000000000 ) ) ; +#273 = CARTESIAN_POINT ( 'NONE', ( 2.817971813880984800, -9.307204746879733600, -23.82914175591397300 ) ) ; +#274 = CARTESIAN_POINT ( 'NONE', ( 37.95400544164246500, -29.13074678904584000, 23.69621799418584700 ) ) ; +#275 = VERTEX_POINT ( 'NONE', #4208 ) ; +#276 = CARTESIAN_POINT ( 'NONE', ( 35.59233716375838700, -30.21443081717996300, 26.10797160731599200 ) ) ; +#277 = EDGE_CURVE ( 'NONE', #11583, #580, #4851, .T. ) ; +#278 = VECTOR ( 'NONE', #3445, 1000.000000000000000 ) ; +#279 = CARTESIAN_POINT ( 'NONE', ( 33.22611621399742900, -95.07596123493895800, 16.33556747316053400 ) ) ; +#280 = CARTESIAN_POINT ( 'NONE', ( 43.00559891548198300, -8.993859317834175500, -23.15239557661901800 ) ) ; +#281 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#282 = CARTESIAN_POINT ( 'NONE', ( 31.92317665554832800, -32.84459165560507900, 27.24682378892539300 ) ) ; +#283 = CARTESIAN_POINT ( 'NONE', ( 7.332080580589683400, -31.02639910147084000, 23.72968608836462700 ) ) ; +#284 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -19.98106661462575300, 8.340814573229558000 ) ) ; +#285 = CARTESIAN_POINT ( 'NONE', ( 31.44012266878596400, -30.84327528486231200, 27.87371434584238400 ) ) ; +#286 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, 12.00000000000000000, 22.50000000000000700 ) ) ; +#287 = EDGE_CURVE ( 'NONE', #10734, #9341, #12499, .T. ) ; +#288 = CARTESIAN_POINT ( 'NONE', ( 41.70430414276675200, -11.04100292819146400, 18.15188246890820200 ) ) ; +#289 = CARTESIAN_POINT ( 'NONE', ( 39.01152951546730200, -28.91849816724171500, 21.87960143457814200 ) ) ; +#290 = ORIENTED_EDGE ( 'NONE', *, *, #23, .F. ) ; +#291 = CARTESIAN_POINT ( 'NONE', ( 6.141505470644430500, -28.87712739319303900, 22.01599472013797900 ) ) ; +#292 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#293 = ORIENTED_EDGE ( 'NONE', *, *, #12947, .T. ) ; +#294 = DIRECTION ( 'NONE', ( -0.9769963564645385300, 0.03615756813151319700, 0.2101683842109262900 ) ) ; +#295 = CARTESIAN_POINT ( 'NONE', ( 19.97572162347331600, -28.77904422273053000, 29.18874783161517100 ) ) ; +#296 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000032000, -29.71061054856841100, 21.60901759478838000 ) ) ; +#297 = CARTESIAN_POINT ( 'NONE', ( 0.7726902267185609100, -8.996941694556017700, -18.72584511928872100 ) ) ; +#298 = CARTESIAN_POINT ( 'NONE', ( 5.338067537378905500E-015, -5.310730522419392600, -19.38014470416685200 ) ) ; +#299 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -23.91420473869551000, -27.45344971053349800 ) ) ; +#300 = VERTEX_POINT ( 'NONE', #3646 ) ; +#301 = CARTESIAN_POINT ( 'NONE', ( 6.092743801991096200, -30.62577346235750000, 21.91917470258590600 ) ) ; +#302 = PLANE ( 'NONE', #7064 ) ; +#303 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#304 = CARTESIAN_POINT ( 'NONE', ( 36.70608424705148600, -30.19007985739149900, 25.39466252559103800 ) ) ; +#305 = EDGE_LOOP ( 'NONE', ( #5802, #5951, #6110 ) ) ; +#306 = EDGE_LOOP ( 'NONE', ( #10992, #11786, #12394, #1749 ) ) ; +#307 = CARTESIAN_POINT ( 'NONE', ( 7.816543822095362700, -100.0000000000000100, -3.223838349584527800 ) ) ; +#308 = CARTESIAN_POINT ( 'NONE', ( 34.31110901940420600, -19.31916679081678000, 20.06964147657407000 ) ) ; +#309 = EDGE_CURVE ( 'NONE', #8742, #5941, #6284, .T. ) ; +#310 = CARTESIAN_POINT ( 'NONE', ( 33.56782321751443000, -30.80116598917167500, 27.08704149203646900 ) ) ; +#311 = ORIENTED_EDGE ( 'NONE', *, *, #11676, .F. ) ; +#312 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -95.45538001128306900, 3.667107191274084200 ) ) ; +#313 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3635, #2609, #4640, #11778, #5686, #12738, #6728, #654, #7764, #1653, #8793, #2657 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 2.301370753934467300E-017, 0.001918502536800371400, 0.003837005073600719800, 0.005755507610401068200, 0.006714758878801232700, 0.007674010147201398000 ), + .UNSPECIFIED. ) ; +#314 = CARTESIAN_POINT ( 'NONE', ( 9.314332200347108100, -20.96064743390584800, 18.53426109774965300 ) ) ; +#315 = CARTESIAN_POINT ( 'NONE', ( 43.00000000000000000, -5.000000000000000900, -24.99999999999999600 ) ) ; +#316 = CARTESIAN_POINT ( 'NONE', ( 7.910446972845011100, -100.0000000000000300, -28.90004843828754100 ) ) ; +#317 = CARTESIAN_POINT ( 'NONE', ( 12.33793244279533500, -30.95620830388391900, 27.42109574776890900 ) ) ; +#318 = VERTEX_POINT ( 'NONE', #3582 ) ; +#319 = CARTESIAN_POINT ( 'NONE', ( 8.840743660462296200, -30.60126146589081100, 25.70268007449952600 ) ) ; +#320 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#321 = CARTESIAN_POINT ( 'NONE', ( 0.5271373811432119600, -11.05304368383120400, -11.75470298769979400 ) ) ; +#322 = CARTESIAN_POINT ( 'NONE', ( 36.41253533424409000, -11.39059854894075500, 24.03090528720182900 ) ) ; +#323 = CARTESIAN_POINT ( 'NONE', ( 24.99183809129697000, -33.35180196542449200, 26.50734624295223400 ) ) ; +#324 = ORIENTED_EDGE ( 'NONE', *, *, #7288, .F. ) ; +#325 = CARTESIAN_POINT ( 'NONE', ( 38.48614399803199100, -30.06183213577499200, 23.88201467381853500 ) ) ; +#326 = CARTESIAN_POINT ( 'NONE', ( -0.01152272974068373900, -95.07596123493894400, -3.205230653520468700 ) ) ; +#327 = CARTESIAN_POINT ( 'NONE', ( 35.55933768751192000, -30.93290609280618900, 25.92984752107087600 ) ) ; +#328 = CARTESIAN_POINT ( 'NONE', ( 10.10482828065882900, -32.11448912449682100, 24.20231349932533500 ) ) ; +#329 = ORIENTED_EDGE ( 'NONE', *, *, #623, .T. ) ; +#330 = VERTEX_POINT ( 'NONE', #3630 ) ; +#331 = CARTESIAN_POINT ( 'NONE', ( 37.64826201990079100, -94.71799171679093400, 15.10973067521916700 ) ) ; +#332 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#333 = CARTESIAN_POINT ( 'NONE', ( 31.22054899248423300, -31.68901400624675100, 19.83727737291442500 ) ) ; +#334 = ADVANCED_FACE ( 'NONE', ( #3253 ), #10737, .F. ) ; +#335 = ORIENTED_EDGE ( 'NONE', *, *, #2209, .F. ) ; +#336 = CARTESIAN_POINT ( 'NONE', ( 6.873190471203600700, -30.22700170166951500, 24.27372913925905700 ) ) ; +#337 = CARTESIAN_POINT ( 'NONE', ( 40.00507913650465500, -19.99051331571618600, -11.55348217575349800 ) ) ; +#338 = CARTESIAN_POINT ( 'NONE', ( 31.33688416925602000, -30.81332400990059700, 27.91019897723165100 ) ) ; +#339 = CARTESIAN_POINT ( 'NONE', ( 14.51197093311986600, -32.81865161010530600, 27.80148718332271000 ) ) ; +#340 = CARTESIAN_POINT ( 'NONE', ( 36.42768816274310200, -12.63147884658493700, 22.93568724967399300 ) ) ; +#341 = CARTESIAN_POINT ( 'NONE', ( 39.92354942858823100, -29.95678510008907100, 21.69770403487122200 ) ) ; +#342 = CARTESIAN_POINT ( 'NONE', ( 10.28352844904550700, -26.83656981075568400, 18.49338560846564400 ) ) ; +#343 = CARTESIAN_POINT ( 'NONE', ( 34.88576150261629000, -13.36407974372338700, -25.00000000000000000 ) ) ; +#344 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #11701, #9466, #12423 ), + ( #4345, #4304, #10279 ), + ( #3369, #11679, #7578 ), + ( #4306, #3300, #5594 ), + ( #7701, #8731, #7940 ), + ( #856, #3414, #4666 ), + ( #8774, #12719, #5450 ), + ( #2566, #11797, #3657 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.002639350588594511200, 0.003959025882891766300, 0.005278701177189022400 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9946465701320237300, 1.000000000000000000), + ( 1.000000000000000000, 0.9955274476840637600, 1.000000000000000000), + ( 1.000000000000000000, 0.9965968415928762000, 1.000000000000000000), + ( 1.000000000000000000, 0.9981999050311699500, 1.000000000000000000), + ( 1.000000000000000000, 0.9987349626481295500, 1.000000000000000000), + ( 1.000000000000000000, 0.9996257091462538200, 1.000000000000000000), + ( 1.000000000000000000, 0.9999884477103701000, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#345 = CIRCLE ( 'NONE', #11756, 1.200000000000013500 ) ; +#346 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#347 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4648, #2665, #7056, #962, #8082, #1960 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( -5.999999999922313300E-008, 0.002740833361278211600, 0.005481726722556421900 ), + .UNSPECIFIED. ) ; +#348 = CARTESIAN_POINT ( 'NONE', ( 18.93880839120390600, -94.74682992104676800, 18.71443454281502000 ) ) ; +#349 = ORIENTED_EDGE ( 'NONE', *, *, #7288, .T. ) ; +#350 = EDGE_CURVE ( 'NONE', #5504, #8914, #4029, .T. ) ; +#351 = CARTESIAN_POINT ( 'NONE', ( 6.256871313281404700, -99.99999999999997200, 17.91973306516004500 ) ) ; +#352 = FACE_OUTER_BOUND ( 'NONE', #4448, .T. ) ; +#353 = CARTESIAN_POINT ( 'NONE', ( 33.72029156406644300, -94.73436467618633100, 17.06123319002350800 ) ) ; +#354 = CARTESIAN_POINT ( 'NONE', ( 0.09130570922502247200, -5.982968504353221000, 16.79590646888351200 ) ) ; +#355 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999999100, -97.57596123493894400, 11.50239124669685800 ) ) ; +#356 = CARTESIAN_POINT ( 'NONE', ( 5.193195724900313300, -29.55943826957914300, 22.08419715487385900 ) ) ; +#357 = DIRECTION ( 'NONE', ( 0.02203124760618845700, -0.9997572826085914200, 0.0000000000000000000 ) ) ; +#358 = CARTESIAN_POINT ( 'NONE', ( 7.910446972845011100, -12.49999999999998400, -13.47143762629743200 ) ) ; +#359 = CARTESIAN_POINT ( 'NONE', ( 36.55062949424114300, -31.04082698306372700, 25.04773121052310700 ) ) ; +#360 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.53566531216938500, 14.03952901457998900 ) ) ; +#361 = CARTESIAN_POINT ( 'NONE', ( 37.48090133728263900, -19.51840077022864500, 16.53890178388074300 ) ) ; +#362 = CARTESIAN_POINT ( 'NONE', ( 33.45186944258700400, -30.32577956732448900, 27.17626659802726200 ) ) ; +#363 = CARTESIAN_POINT ( 'NONE', ( 6.364073895877021800, -28.87841101878999300, 22.48730482327838600 ) ) ; +#364 = CIRCLE ( 'NONE', #6391, 2.500000000000000900 ) ; +#365 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#366 = CARTESIAN_POINT ( 'NONE', ( 7.813280731601873100, -100.0000000000000300, -28.50008026614134900 ) ) ; +#367 = EDGE_LOOP ( 'NONE', ( #8863, #6781 ) ) ; +#368 = CARTESIAN_POINT ( 'NONE', ( 12.33285621710684400, -30.72703720508641100, 27.47707708245442500 ) ) ; +#369 = CARTESIAN_POINT ( 'NONE', ( 8.952999812243865200, -29.76244602653176600, 25.68929704104367300 ) ) ; +#370 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#371 = CARTESIAN_POINT ( 'NONE', ( 33.13922757452628800, -11.51158039690805900, 25.00000000000000000 ) ) ; +#372 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -19.87270537885227000, 23.25917566912282200 ) ) ; +#373 = CARTESIAN_POINT ( 'NONE', ( 37.95520661982533300, -30.96840022980866500, 23.37290287337786100 ) ) ; +#374 = VECTOR ( 'NONE', #9804, 1000.000000000000000 ) ; +#375 = CARTESIAN_POINT ( 'NONE', ( 35.43537565957917200, -29.91728868950625400, 26.11735572836586200 ) ) ; +#376 = CARTESIAN_POINT ( 'NONE', ( 41.15537051365254200, -11.23571604708998500, -22.46755997374652500 ) ) ; +#377 = CARTESIAN_POINT ( 'NONE', ( 0.9734460265392627100, -95.07596123493894400, 2.049002866222468600 ) ) ; +#378 = CARTESIAN_POINT ( 'NONE', ( 24.85960558233109600, -33.35446909076586800, 26.50697697917620500 ) ) ; +#379 = CARTESIAN_POINT ( 'NONE', ( 34.51769791322120500, -37.55838243924866800, 16.69312461151178400 ) ) ; +#380 = CARTESIAN_POINT ( 'NONE', ( 7.331016760575177900, -29.20085970779652800, 24.05251797604090700 ) ) ; +#381 = CARTESIAN_POINT ( 'NONE', ( 41.04733260689442200, -17.89743420367034700, -11.34357507153381800 ) ) ; +#382 = CARTESIAN_POINT ( 'NONE', ( 31.33688445369068600, -30.82952975306520900, 27.90734138462181200 ) ) ; +#383 = CARTESIAN_POINT ( 'NONE', ( 10.15418014761394300, -32.12807391804702200, 24.22852741492573600 ) ) ; +#384 = CARTESIAN_POINT ( 'NONE', ( 38.89592072513056600, -28.89824147463655600, 22.00232084560463300 ) ) ; +#385 = VECTOR ( 'NONE', #10713, 1000.000000000000000 ) ; +#386 = CARTESIAN_POINT ( 'NONE', ( 9.937840060399254900, -20.78193668869771200, 19.17199578343242900 ) ) ; +#387 = CARTESIAN_POINT ( 'NONE', ( 8.422237887215139600, -12.49999999999999600, 14.17978553366012700 ) ) ; +#388 = EDGE_LOOP ( 'NONE', ( #5621, #5665, #5705, #5836, #5854 ) ) ; +#389 = CARTESIAN_POINT ( 'NONE', ( 20.18719255689187600, -31.29913968154957600, 28.74438700826459600 ) ) ; +#390 = CARTESIAN_POINT ( 'NONE', ( 12.11898542587741200, -93.15425519970766300, 21.68254789131482600 ) ) ; +#391 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4642, #10764, #5690, #12740, #6730, #656 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 1.327915311933902500E-017, 0.001454999123311138400, 0.002909998246622263900 ), + .UNSPECIFIED. ) ; +#392 = EDGE_CURVE ( 'NONE', #4202, #8691, #2934, .T. ) ; +#393 = VECTOR ( 'NONE', #6067, 1000.000000000000000 ) ; +#394 = CARTESIAN_POINT ( 'NONE', ( 29.39422397176296900, -14.74216770378517300, -25.83617211322160400 ) ) ; +#395 = CARTESIAN_POINT ( 'NONE', ( 11.26301597256444300, -12.98485801388094500, 24.47368899856892800 ) ) ; +#396 = CARTESIAN_POINT ( 'NONE', ( 6.218694083888715700, -30.68478251826508100, 22.01585920960329500 ) ) ; +#397 = DIRECTION ( 'NONE', ( -0.9997497390652421200, -0.02203108137216859200, -0.003884674060096816700 ) ) ; +#398 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #167, .NOT_KNOWN. ) ; +#399 = CARTESIAN_POINT ( 'NONE', ( 36.35264232611579900, -29.86007796889293800, 25.53843582514202000 ) ) ; +#400 = CARTESIAN_POINT ( 'NONE', ( 38.86866264246941000, -19.66920616124453100, 13.86673478849871100 ) ) ; +#401 = ADVANCED_FACE ( 'NONE', ( #5645 ), #13025, .T. ) ; +#402 = CARTESIAN_POINT ( 'NONE', ( 33.47098159914960300, -30.70332908767796800, 27.15352446084324700 ) ) ; +#403 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -9.592428503361020400, -11.53173910331479100 ) ) ; +#404 = CARTESIAN_POINT ( 'NONE', ( 10.88178068360166500, -26.96720257271021700, 18.94519405096788500 ) ) ; +#405 = VECTOR ( 'NONE', #3981, 1000.000000000000000 ) ; +#406 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 9.500000000000000000, -23.00000000000000000 ) ) ; +#407 = CARTESIAN_POINT ( 'NONE', ( 12.33821205158714700, -30.52173408277019100, 27.49687181799607000 ) ) ; +#408 = CARTESIAN_POINT ( 'NONE', ( 8.994176131408162100, -30.92513981080129400, 25.61543884963848300 ) ) ; +#409 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#410 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#411 = CARTESIAN_POINT ( 'NONE', ( 38.23552464561300500, -29.79460514171517400, 24.08393283454993700 ) ) ; +#412 = CARTESIAN_POINT ( 'NONE', ( 35.51600290716596900, -30.65063692922188200, 26.11546143280453700 ) ) ; +#413 = CARTESIAN_POINT ( 'NONE', ( 36.57697285504570300, -95.07596123493897300, 13.55967711235046200 ) ) ; +#414 = CARTESIAN_POINT ( 'NONE', ( 7.974808194957759600, -94.72210163403924800, 15.44587895064602500 ) ) ; +#415 = CARTESIAN_POINT ( 'NONE', ( 6.008666427060379800, -95.07596123493894400, 0.4163258229736830400 ) ) ; +#416 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#417 = CARTESIAN_POINT ( 'NONE', ( 39.52813417096388800, -29.92734082028161800, 19.49139426586655000 ) ) ; +#418 = CARTESIAN_POINT ( 'NONE', ( 6.962247056218187100, -30.50800774861072300, 24.18436560874651400 ) ) ; +#419 = CARTESIAN_POINT ( 'NONE', ( 39.82329182842764900, -22.52176561802654600, -9.571848456910741400 ) ) ; +#420 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457655200, -30.82655086342983000, 27.93782961424066300 ) ) ; +#421 = CARTESIAN_POINT ( 'NONE', ( 5.271098100360299000, -28.55458998826388500, 23.68115763974563500 ) ) ; +#422 = CARTESIAN_POINT ( 'NONE', ( 39.94738937081096700, -29.63345143135342900, 21.86484347345186000 ) ) ; +#423 = VECTOR ( 'NONE', #2898, 1000.000000000000000 ) ; +#424 = CARTESIAN_POINT ( 'NONE', ( 6.910962720026977200, -28.86879578465314800, 23.39833498765950600 ) ) ; +#425 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000900, 14.31000000000000900 ) ) ; +#426 = CARTESIAN_POINT ( 'NONE', ( 9.193606281620724000, -97.45967356877562800, 19.84958694665047200 ) ) ; +#427 = CARTESIAN_POINT ( 'NONE', ( 24.93866206969478600, -30.66176281334873400, 28.85677374700786400 ) ) ; +#428 = CARTESIAN_POINT ( 'NONE', ( 10.48235674927564400, -15.53605052395163500, -24.93438326327191800 ) ) ; +#429 = CARTESIAN_POINT ( 'NONE', ( 14.61332964091720200, -16.62336095071976800, 23.83212276141728500 ) ) ; +#430 = ORIENTED_EDGE ( 'NONE', *, *, #10247, .F. ) ; +#431 = CARTESIAN_POINT ( 'NONE', ( 5.205232290779860300, -29.92653540727918900, 22.13255325876771800 ) ) ; +#432 = CARTESIAN_POINT ( 'NONE', ( 20.06133793030467400, -30.22764236918144600, 26.39475436447733600 ) ) ; +#433 = CARTESIAN_POINT ( 'NONE', ( 0.9084284741246703200, -7.873854980448083300, 18.11134077736451100 ) ) ; +#434 = LINE ( 'NONE', #9758, #8220 ) ; +#435 = CARTESIAN_POINT ( 'NONE', ( 39.72106603230155700, -19.83333678081672600, 10.95846724948713700 ) ) ; +#436 = CARTESIAN_POINT ( 'NONE', ( 33.45181747803896900, -31.03715051431067800, 27.05071705015604900 ) ) ; +#437 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -90.07596123493897300, -4.350951650170485700 ) ) ; +#438 = CARTESIAN_POINT ( 'NONE', ( 10.26492009026375900, -20.70413068737872600, 19.47757146460464400 ) ) ; +#439 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000001800, 10.00000000000000000, -24.99999999999999600 ) ) ; +#440 = CARTESIAN_POINT ( 'NONE', ( 12.73991035090188700, -30.79490330386136400, 27.61376712951928500 ) ) ; +#441 = ORIENTED_EDGE ( 'NONE', *, *, #11421, .F. ) ; +#442 = CARTESIAN_POINT ( 'NONE', ( 8.952516105469166900, -30.13110652528621400, 25.81623802102049900 ) ) ; +#443 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000900, 20.69000000000000100 ) ) ; +#444 = CARTESIAN_POINT ( 'NONE', ( 32.83404848977603100, -28.22083403844325400, 25.86453585041186200 ) ) ; +#445 = CARTESIAN_POINT ( 'NONE', ( 35.09239872101454700, -10.96103814463941200, 24.83054304561007800 ) ) ; +#446 = ORIENTED_EDGE ( 'NONE', *, *, #8975, .T. ) ; +#447 = CARTESIAN_POINT ( 'NONE', ( 37.98287599785999900, -30.84002848717164400, 23.69822404409700000 ) ) ; +#448 = CARTESIAN_POINT ( 'NONE', ( 35.13890572631088800, -29.86820288804439000, 26.26633468571281000 ) ) ; +#449 = ORIENTED_EDGE ( 'NONE', *, *, #7474, .T. ) ; +#450 = VERTEX_POINT ( 'NONE', #3240 ) ; +#451 = CARTESIAN_POINT ( 'NONE', ( 43.12831313601392900, -8.903692498811105700, -23.07147490981944300 ) ) ; +#452 = CARTESIAN_POINT ( 'NONE', ( 0.2529175625061887400, 10.60787792801393300, -22.94941648749877300 ) ) ; +#453 = CARTESIAN_POINT ( 'NONE', ( 38.09528913022038700, -30.68603640414837800, 13.69970711763243000 ) ) ; +#454 = ADVANCED_FACE ( 'NONE', ( #2611 ), #2515, .T. ) ; +#455 = CARTESIAN_POINT ( 'NONE', ( 7.198055670765951300, -29.41161035952580200, 24.16919077518121000 ) ) ; +#456 = ORIENTED_EDGE ( 'NONE', *, *, #5037, .T. ) ; +#457 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342981900, 27.93782961424065500 ) ) ; +#458 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#459 = EDGE_CURVE ( 'NONE', #8668, #11427, #10434, .T. ) ; +#460 = AXIS2_PLACEMENT_3D ( 'NONE', #2153, #9286, #3168 ) ; +#461 = CARTESIAN_POINT ( 'NONE', ( 38.92727564050272100, -30.59621541282959400, 21.70242235415323200 ) ) ; +#462 = VERTEX_POINT ( 'NONE', #3210 ) ; +#463 = AXIS2_PLACEMENT_3D ( 'NONE', #12798, #6790, #711 ) ; +#464 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#465 = CARTESIAN_POINT ( 'NONE', ( 42.49999999999999300, -5.000000000000000900, 25.00000000000000000 ) ) ; +#466 = EDGE_LOOP ( 'NONE', ( #9590, #9888, #10368, #10676, #10839 ) ) ; +#467 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, 9.723972447247822600, -15.80114926534604100 ) ) ; +#468 = CARTESIAN_POINT ( 'NONE', ( 8.425772001643903100, -94.72405989681506400, 15.71035575179371000 ) ) ; +#469 = PLANE ( 'NONE', #7382 ) ; +#470 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999997200, -12.49999999999998200, -11.04235669213004400 ) ) ; +#471 = CARTESIAN_POINT ( 'NONE', ( 20.14039441766890400, -33.35446909076587500, 26.50697697917620500 ) ) ; +#472 = CARTESIAN_POINT ( 'NONE', ( 16.85986349143140500, -18.24985351684646100, 23.54532823808740400 ) ) ; +#473 = CARTESIAN_POINT ( 'NONE', ( 6.188363358766086900, -28.94673221560970300, 22.32111552093266500 ) ) ; +#474 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000005300, -100.0000000000000100, -25.63802908547508600 ) ) ; +#475 = CARTESIAN_POINT ( 'NONE', ( 10.84980449800077700, -30.89956534075191600, 26.77194542825939300 ) ) ; +#476 = ORIENTED_EDGE ( 'NONE', *, *, #6388, .T. ) ; +#477 = ORIENTED_EDGE ( 'NONE', *, *, #4577, .F. ) ; +#478 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#479 = EDGE_CURVE ( 'NONE', #607, #1924, #7744, .T. ) ; +#480 = ORIENTED_EDGE ( 'NONE', *, *, #8226, .F. ) ; +#481 = CARTESIAN_POINT ( 'NONE', ( 14.78384262019704600, -95.07596123493894400, 15.30026349260080900 ) ) ; +#482 = CARTESIAN_POINT ( 'NONE', ( 33.27097392386983900, -30.63838080675287000, 27.24904614090829800 ) ) ; +#483 = DIRECTION ( 'NONE', ( 0.9990121743732292000, -0.04443732050959693600, 0.0000000000000000000 ) ) ; +#484 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#485 = CARTESIAN_POINT ( 'NONE', ( 12.74067707880306700, -30.62652863103567900, 27.63684774644804400 ) ) ; +#486 = DIRECTION ( 'NONE', ( 2.775557561562885400E-015, -0.9464700826150233000, 0.3227915468451907400 ) ) ; +#487 = CARTESIAN_POINT ( 'NONE', ( 9.243475596338843300, -31.15146870186337900, 25.59474203263805900 ) ) ; +#488 = CARTESIAN_POINT ( 'NONE', ( 33.88314041912075700, -18.29874062769991700, -24.82574563646855400 ) ) ; +#489 = CARTESIAN_POINT ( 'NONE', ( 37.07973720727990500, -31.14384953383330800, 25.22406956378201300 ) ) ; +#490 = CARTESIAN_POINT ( 'NONE', ( 34.97065516291383600, -10.00000000000000700, 24.99999999999999300 ) ) ; +#491 = ORIENTED_EDGE ( 'NONE', *, *, #8357, .T. ) ; +#492 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#493 = CARTESIAN_POINT ( 'NONE', ( 37.91100061089292700, -29.38399497810009500, 24.04598345211351800 ) ) ; +#494 = VERTEX_POINT ( 'NONE', #2419 ) ; +#495 = AXIS2_PLACEMENT_3D ( 'NONE', #8676, #2537, #11841 ) ; +#496 = CARTESIAN_POINT ( 'NONE', ( 35.23708126445130500, -30.51269103284695600, 26.31579999166231300 ) ) ; +#497 = CARTESIAN_POINT ( 'NONE', ( 34.49407894617517200, -16.63655602679736100, -24.80432773142087700 ) ) ; +#498 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000000, -17.49999999999999600 ) ) ; +#499 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -30.66316004086981200, 28.85652737809770900 ) ) ; +#500 = VERTEX_POINT ( 'NONE', #2181 ) ; +#501 = CARTESIAN_POINT ( 'NONE', ( 39.57445554076528500, -30.79756603875388500, 9.733647318743663800 ) ) ; +#502 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4127, #4146, #4081, #4050, #4030, #4003, #3962, #3920, #3876, #3832 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002772707976215507000, 0.005545415952431011400, 0.008318123928646515800, 0.01109083190486202100 ), + .UNSPECIFIED. ) ; +#503 = CARTESIAN_POINT ( 'NONE', ( 7.343540867429384300, -30.88826186923089200, 24.07626381493117100 ) ) ; +#504 = CARTESIAN_POINT ( 'NONE', ( 20.06238715496508400, -28.77726908290507900, 29.18906083666096400 ) ) ; +#505 = LINE ( 'NONE', #248, #10962 ) ; +#506 = CARTESIAN_POINT ( 'NONE', ( 39.62143338693956500, -29.28108144136843200, 21.98221882252785500 ) ) ; +#507 = CARTESIAN_POINT ( 'NONE', ( 11.18996496439523400, -27.02107463353490100, 19.16186779865817500 ) ) ; +#508 = CARTESIAN_POINT ( 'NONE', ( 8.423147374052367900, -95.07596123493895800, 13.55977114504475400 ) ) ; +#509 = CARTESIAN_POINT ( 'NONE', ( 24.95910839707759600, -30.66221338081050300, 28.85669429980772400 ) ) ; +#510 = CARTESIAN_POINT ( 'NONE', ( 32.68146455365865000, -12.49999999999999600, -20.28797043476592800 ) ) ; +#511 = CARTESIAN_POINT ( 'NONE', ( 43.24887926476635200, -8.800629358799838500, -23.00000000000000000 ) ) ; +#512 = CARTESIAN_POINT ( 'NONE', ( 35.41419681963088800, -19.52356800137410500, -23.51371430638140600 ) ) ; +#513 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#514 = CIRCLE ( 'NONE', #8475, 4.999999999999999100 ) ; +#515 = CARTESIAN_POINT ( 'NONE', ( 5.686548845821904200, -30.34795755876394100, 22.37525303110425800 ) ) ; +#516 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, 9.500000000000000000, 22.50000000000000700 ) ) ; +#517 = CARTESIAN_POINT ( 'NONE', ( 10.84980606195307700, -30.35921106599241200, 26.86723153823956500 ) ) ; +#518 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#519 = ADVANCED_FACE ( 'NONE', ( #8391 ), #739, .T. ) ; +#520 = CARTESIAN_POINT ( 'NONE', ( 33.26055539886292000, -30.96809291710102500, 27.16657341728340200 ) ) ; +#521 = CARTESIAN_POINT ( 'NONE', ( 37.80706169169864900, -34.80677151831253700, 13.32760694014991800 ) ) ; +#522 = CARTESIAN_POINT ( 'NONE', ( 8.189340439391937600, -21.42388897666819900, 17.15377118207680200 ) ) ; +#523 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -90.07596123493894400, 10.95758058754439400 ) ) ; +#524 = CARTESIAN_POINT ( 'NONE', ( 20.02044561449708800, -30.66267912171459300, 28.85661217712031500 ) ) ; +#525 = CARTESIAN_POINT ( 'NONE', ( 12.94463142931717300, -30.85067877660487300, 27.67347775545841100 ) ) ; +#526 = FACE_OUTER_BOUND ( 'NONE', #10420, .T. ) ; +#527 = CARTESIAN_POINT ( 'NONE', ( 9.105776601678531500, -30.40822573987522400, 25.93227963134945900 ) ) ; +#528 = CARTESIAN_POINT ( 'NONE', ( 0.02838215973449089200, 9.894538436513098400, -16.11193963103031000 ) ) ; +#529 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#530 = ORIENTED_EDGE ( 'NONE', *, *, #5361, .F. ) ; +#531 = CARTESIAN_POINT ( 'NONE', ( 38.15498889920257900, -30.49021449113387000, 24.05893204800788600 ) ) ; +#532 = CARTESIAN_POINT ( 'NONE', ( 1.734723475976807100E-015, -8.701990799946578600, -12.98065011436205500 ) ) ; +#533 = CARTESIAN_POINT ( 'NONE', ( 35.13916994912879200, -31.15445507571169900, 26.03998011881458300 ) ) ; +#534 = CARTESIAN_POINT ( 'NONE', ( 33.96569286979681100, -15.77587438456898500, -24.99943197168378000 ) ) ; +#535 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -10.00000000000000500, -24.99999999999999600 ) ) ; +#536 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -22.36781719137903200, -11.94938068502386800 ) ) ; +#537 = CARTESIAN_POINT ( 'NONE', ( 7.119413118574268400, -29.87633220248465100, 24.46303173368430000 ) ) ; +#538 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -90.07596123493894400, 15.95758058754439400 ) ) ; +#539 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5557, #12618, #528, #7637, #1522, #8664, #2526, #9668, #3541, #10673 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001065464361979364600, 0.002130928723958729200, 0.003196393085938093900, 0.004261857447917458300 ), + .UNSPECIFIED. ) ; +#540 = CARTESIAN_POINT ( 'NONE', ( 39.99933380663424000, -90.08414409138437400, -4.495944938627319600 ) ) ; +#541 = CYLINDRICAL_SURFACE ( 'NONE', #3498, 15.00000000000000200 ) ; +#542 = CARTESIAN_POINT ( 'NONE', ( 39.31469918531033200, -30.42730477651000600, 21.78170079559312500 ) ) ; +#543 = CARTESIAN_POINT ( 'NONE', ( 7.234760691540598600, -28.85815751871796300, 23.83799537699112400 ) ) ; +#544 = ORIENTED_EDGE ( 'NONE', *, *, #11273, .F. ) ; +#545 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000700, -95.07596123493894400, 16.93034213569666900 ) ) ; +#546 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000900, 14.31000000000000900 ) ) ; +#547 = EDGE_CURVE ( 'NONE', #8691, #8908, #8065, .T. ) ; +#548 = CARTESIAN_POINT ( 'NONE', ( 16.12211316250486700, -19.16082334189565000, 22.87533886643949200 ) ) ; +#549 = CARTESIAN_POINT ( 'NONE', ( 5.958518511862808800, -29.17658078620376100, 22.57853002820027700 ) ) ; +#550 = FACE_OUTER_BOUND ( 'NONE', #5740, .T. ) ; +#551 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#552 = CARTESIAN_POINT ( 'NONE', ( 11.69149334269538300, -100.0000000000000100, -35.18610464165196600 ) ) ; +#553 = CARTESIAN_POINT ( 'NONE', ( 10.96504488112122800, -31.05677116931070700, 26.75491144539824600 ) ) ; +#554 = CARTESIAN_POINT ( 'NONE', ( 0.1365291604204587900, -6.186006111456306300, -20.27586219994468300 ) ) ; +#555 = CARTESIAN_POINT ( 'NONE', ( 33.16556655256211200, -30.51296933540989200, 27.30048929420119600 ) ) ; +#556 = CARTESIAN_POINT ( 'NONE', ( 29.31485634659797100, -39.11576966896411300, 19.23300845435738500 ) ) ; +#557 = CARTESIAN_POINT ( 'NONE', ( 10.77906865507968300, -20.59987137933213900, 19.91522292892394600 ) ) ; +#558 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#559 = CARTESIAN_POINT ( 'NONE', ( 12.94462899332782700, -30.71346308800910300, 27.69767163694830000 ) ) ; +#560 = CARTESIAN_POINT ( 'NONE', ( 9.250323892017558300, -29.69805625106161900, 25.84075789556729700 ) ) ; +#561 = LINE ( 'NONE', #5502, #11032 ) ; +#562 = CARTESIAN_POINT ( 'NONE', ( 17.62120437086121800, -19.95261139593877400, 23.09788069711301300 ) ) ; +#563 = CARTESIAN_POINT ( 'NONE', ( 4.513261592306451000, -11.37607200054001800, -23.20837827956649600 ) ) ; +#564 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12442, #7449, #1340, #8482, #2340, #9483, #3361, #10499, #4364, #11513, #5408, #12649, #6623, #552, #7666, #1555, #8694, #2557, #9698, #3572, #10702, #4585, #11727, #5625 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.1250000000000002500, 0.1875000000000006100, 0.2500000000000009400, 0.3750000000000011100, 0.4375000000000011700, 0.5000000000000012200, 0.6250000000000007800, 0.6875000000000005600, 0.7500000000000003300, 0.8750000000000002200, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#565 = CARTESIAN_POINT ( 'NONE', ( 37.66873448655589800, -29.20080456306777000, 24.05269078566400200 ) ) ; +#566 = CARTESIAN_POINT ( 'NONE', ( 6.558334857790960100E-013, -9.184418350829345100, -15.67210875941131600 ) ) ; +#567 = ORIENTED_EDGE ( 'NONE', *, *, #13036, .F. ) ; +#568 = CARTESIAN_POINT ( 'NONE', ( 35.03283957153981700, -30.35495780506205700, 26.43026998433891400 ) ) ; +#569 = VERTEX_POINT ( 'NONE', #1609 ) ; +#570 = LINE ( 'NONE', #2854, #11044 ) ; +#571 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.500000000000000000, -22.99999999999999600 ) ) ; +#572 = CARTESIAN_POINT ( 'NONE', ( 0.8450799996950028000, -8.389711229384591500, -19.69998625431980000 ) ) ; +#573 = CARTESIAN_POINT ( 'NONE', ( 20.06133793030467400, -30.66176281334875100, 28.85677374700786000 ) ) ; +#574 = CARTESIAN_POINT ( 'NONE', ( 38.28799367709280000, -7.463541018600210500, -24.99999999999999600 ) ) ; +#575 = CARTESIAN_POINT ( 'NONE', ( 7.610172341702153200, -31.07042522016306700, 24.05492044663101900 ) ) ; +#576 = CARTESIAN_POINT ( 'NONE', ( 11.33297044847062000, -28.26503192583804100, 25.48816877370713700 ) ) ; +#577 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -8.819660112500990600, -11.53187062879840100 ) ) ; +#578 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -97.57695997645456000, 13.47617866096553200 ) ) ; +#579 = CARTESIAN_POINT ( 'NONE', ( 39.01420061141873700, -29.00212726455894700, 22.20180162088562200 ) ) ; +#580 = VERTEX_POINT ( 'NONE', #1479 ) ; +#581 = CARTESIAN_POINT ( 'NONE', ( 11.67082122308149600, -27.08702971144371600, 19.47639837657915200 ) ) ; +#582 = FACE_OUTER_BOUND ( 'NONE', #3738, .T. ) ; +#583 = CARTESIAN_POINT ( 'NONE', ( 7.211400130910186100, -95.01597834041012900, 10.11859031093026400 ) ) ; +#584 = CARTESIAN_POINT ( 'NONE', ( 39.93340352141111500, -29.48973422075584200, 21.64835419402680100 ) ) ; +#585 = CARTESIAN_POINT ( 'NONE', ( 0.5501575608172601900, -7.875105701639949300, -19.63834276085542600 ) ) ; +#586 = CARTESIAN_POINT ( 'NONE', ( 34.49407894617425500, -16.63655602679789800, -24.80432773142106100 ) ) ; +#587 = CARTESIAN_POINT ( 'NONE', ( 6.288457645512576000, -30.70758965398303500, 22.51205705134587400 ) ) ; +#588 = CARTESIAN_POINT ( 'NONE', ( 6.705196298508411700, -7.998350360852694700, -24.99531963422921200 ) ) ; +#589 = ORIENTED_EDGE ( 'NONE', *, *, #12002, .F. ) ; +#590 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -97.40634803306923600, 22.08790255657621800 ) ) ; +#591 = CARTESIAN_POINT ( 'NONE', ( 10.93636492923809400, -30.56617239033937800, 26.90290243130857900 ) ) ; +#592 = ORIENTED_EDGE ( 'NONE', *, *, #12575, .T. ) ; +#593 = EDGE_CURVE ( 'NONE', #8256, #11004, #2303, .T. ) ; +#594 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, -96.63045792889080600, 22.10430763399309100 ) ) ; +#595 = CARTESIAN_POINT ( 'NONE', ( 24.99264576486652000, -27.96523496585091800, 27.45710953202297200 ) ) ; +#596 = CARTESIAN_POINT ( 'NONE', ( 33.16909385207586100, -30.83091888220818400, 27.25282387817646800 ) ) ; +#597 = ORIENTED_EDGE ( 'NONE', *, *, #1512, .T. ) ; +#598 = CARTESIAN_POINT ( 'NONE', ( 8.745351193111920600, -12.50000000000001100, 14.92910737668276500 ) ) ; +#599 = CARTESIAN_POINT ( 'NONE', ( 7.789002235409706800, -28.83925307298209600, 24.47023034363110500 ) ) ; +#600 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -19.99999999999987600, -7.373247840157476100 ) ) ; +#601 = CARTESIAN_POINT ( 'NONE', ( 13.25144309480557500, -30.86878692116842900, 27.77124526321717800 ) ) ; +#602 = ORIENTED_EDGE ( 'NONE', *, *, #6112, .F. ) ; +#603 = CARTESIAN_POINT ( 'NONE', ( 9.201597587609683200, -30.60169844986647200, 25.95292851753029200 ) ) ; +#604 = CARTESIAN_POINT ( 'NONE', ( 4.999999918618738300, -29.71061042947956900, 21.60901691940279400 ) ) ; +#605 = ORIENTED_EDGE ( 'NONE', *, *, #2235, .F. ) ; +#606 = CARTESIAN_POINT ( 'NONE', ( 4.498703221913279600, -10.03602314458314200, -23.85778556213702800 ) ) ; +#607 = VERTEX_POINT ( 'NONE', #1402 ) ; +#608 = CARTESIAN_POINT ( 'NONE', ( 10.11423849738440600, -13.36407974370884600, -25.00000000000000000 ) ) ; +#609 = CARTESIAN_POINT ( 'NONE', ( 38.12660086208263300, -30.22703685366562700, 24.27399482321266100 ) ) ; +#610 = EDGE_LOOP ( 'NONE', ( #4060, #4085, #4381, #4408 ) ) ; +#611 = CARTESIAN_POINT ( 'NONE', ( 0.8745874976780032600, -8.142789134432293400, -20.10299357009196800 ) ) ; +#612 = CARTESIAN_POINT ( 'NONE', ( 34.99039113568789400, -31.01511563064682200, 26.24027172127139800 ) ) ; +#613 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#614 = VERTEX_POINT ( 'NONE', #1582 ) ; +#615 = CARTESIAN_POINT ( 'NONE', ( 11.80383456982950800, -9.743650729930648100, -25.00000000000000000 ) ) ; +#616 = CARTESIAN_POINT ( 'NONE', ( 4.788672743637568500, -19.57734548727501400, -8.031015517472186000 ) ) ; +#617 = CARTESIAN_POINT ( 'NONE', ( 7.721349038730013000, -23.27181122408381600, -20.87146917316570700 ) ) ; +#618 = ORIENTED_EDGE ( 'NONE', *, *, #11548, .F. ) ; +#619 = CARTESIAN_POINT ( 'NONE', ( 7.202079131728979200, -30.19396505407343400, 24.60436730913694000 ) ) ; +#620 = CARTESIAN_POINT ( 'NONE', ( 7.607815534742164800, -29.23672032205926300, 25.36000330380691600 ) ) ; +#621 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999999300, -7.848436981163935400, -15.47199634132270600 ) ) ; +#622 = CARTESIAN_POINT ( 'NONE', ( 40.00864204707203000, -90.02697877893297100, -3.483023999303743100 ) ) ; +#623 = EDGE_CURVE ( 'NONE', #11270, #3107, #7433, .T. ) ; +#624 = CARTESIAN_POINT ( 'NONE', ( 39.77113324961511200, -30.06449585745133700, 21.99553783491684600 ) ) ; +#625 = AXIS2_PLACEMENT_3D ( 'NONE', #989, #8109, #1991 ) ; +#626 = CARTESIAN_POINT ( 'NONE', ( 10.95456814771572800, -20.56718304446289400, 20.05776070514478700 ) ) ; +#627 = CARTESIAN_POINT ( 'NONE', ( 38.94931178141215600, -30.55092223628112100, 21.46123905850131000 ) ) ; +#628 = ORIENTED_EDGE ( 'NONE', *, *, #2486, .T. ) ; +#629 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -21.70458154949943000, -11.08548112641110200 ) ) ; +#630 = CARTESIAN_POINT ( 'NONE', ( 6.071532165918824800E-015, -5.000000000000023100, 16.06938735382970800 ) ) ; +#631 = ORIENTED_EDGE ( 'NONE', *, *, #11752, .F. ) ; +#632 = CARTESIAN_POINT ( 'NONE', ( 19.94237873759180200, -27.96664356504567600, 27.45669629622857100 ) ) ; +#633 = CARTESIAN_POINT ( 'NONE', ( 0.01613180677104691600, -5.591184267563601700, -19.40539191210294900 ) ) ; +#634 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -27.09143239524033600, 6.754920151478383000 ) ) ; +#635 = CARTESIAN_POINT ( 'NONE', ( 5.662452534194364300, -29.62879695869457900, 22.73223155780855700 ) ) ; +#636 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#637 = CARTESIAN_POINT ( 'NONE', ( 10.27210974545642800, -99.99999999999998600, 19.85362497496258900 ) ) ; +#638 = CARTESIAN_POINT ( 'NONE', ( 11.16077461700820600, -31.07172700768039800, 26.84686540244445000 ) ) ; +#639 = AXIS2_PLACEMENT_3D ( 'NONE', #7703, #8734, #2593 ) ; +#640 = EDGE_CURVE ( 'NONE', #5812, #3580, #3476, .T. ) ; +#641 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#642 = EDGE_CURVE ( 'NONE', #10144, #6970, #5319, .T. ) ; +#643 = CARTESIAN_POINT ( 'NONE', ( 38.28799367709280700, -7.463541018600234400, -24.99999999999999600 ) ) ; +#644 = CARTESIAN_POINT ( 'NONE', ( 32.86176830559316600, -30.48077870003799100, 27.42177660940711800 ) ) ; +#645 = LINE ( 'NONE', #10799, #8122 ) ; +#646 = CARTESIAN_POINT ( 'NONE', ( 16.71020703018808000, -12.50000000000001200, 21.63955216186352700 ) ) ; +#647 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#648 = LINE ( 'NONE', #3345, #11126 ) ; +#649 = CARTESIAN_POINT ( 'NONE', ( 4.612609500766606800, -19.22521900153310200, -8.730761390335501900 ) ) ; +#650 = EDGE_LOOP ( 'NONE', ( #3806, #2095, #2400, #831 ) ) ; +#651 = CARTESIAN_POINT ( 'NONE', ( 13.25252014070350800, -30.78739843037327300, 27.78736872710203100 ) ) ; +#652 = CARTESIAN_POINT ( 'NONE', ( 9.318735472578429900, -29.77979906746637100, 25.91998613295309200 ) ) ; +#653 = CARTESIAN_POINT ( 'NONE', ( 10.63122834596585200, -19.40405613632587400, -24.34960207146058800 ) ) ; +#654 = CARTESIAN_POINT ( 'NONE', ( 36.14694281261063200, -11.50036640196331700, 24.09038643232102200 ) ) ; +#655 = CARTESIAN_POINT ( 'NONE', ( 4.539177696878153900, -8.924399877545601700, -24.76466117942833700 ) ) ; +#656 = CARTESIAN_POINT ( 'NONE', ( 2.504369967205455800, -10.44154865655181100, -20.92187104639650700 ) ) ; +#657 = CARTESIAN_POINT ( 'NONE', ( 37.66769359732818900, -31.02648362108565600, 23.72986394502929700 ) ) ; +#658 = AXIS2_PLACEMENT_3D ( 'NONE', #7971, #1850, #8984 ) ; +#659 = CARTESIAN_POINT ( 'NONE', ( 34.61638888933232700, -30.15134100600827700, 26.61728406837071100 ) ) ; +#660 = CARTESIAN_POINT ( 'NONE', ( 31.44108978506272900, -30.78730560925645700, 27.88443467963182300 ) ) ; +#661 = ORIENTED_EDGE ( 'NONE', *, *, #547, .T. ) ; +#662 = CARTESIAN_POINT ( 'NONE', ( 11.09495364709944500, -10.78930222077697800, -25.00000000000042300 ) ) ; +#663 = CARTESIAN_POINT ( 'NONE', ( 3.006537799392820800E-013, -5.295092987529893800, -19.37887399481887500 ) ) ; +#664 = CARTESIAN_POINT ( 'NONE', ( 4.386138431924298900, -18.77227686384848900, -9.825167473895589900 ) ) ; +#665 = CARTESIAN_POINT ( 'NONE', ( 17.98905564146216600, -23.90169885629498100, -27.32241949026418500 ) ) ; +#666 = CARTESIAN_POINT ( 'NONE', ( 7.611093597240307300, -29.26797773423552200, 24.37184176720374400 ) ) ; +#667 = CARTESIAN_POINT ( 'NONE', ( 42.23112345983271600, -9.679027594942448700, -22.16401068443653300 ) ) ; +#668 = CARTESIAN_POINT ( 'NONE', ( 42.41969583977191100, -95.07596123493894400, 5.716033726919755900 ) ) ; +#669 = CARTESIAN_POINT ( 'NONE', ( 38.78269590492281800, -28.93519908147686300, 22.32519358701777900 ) ) ; +#670 = CIRCLE ( 'NONE', #9716, 2.499999999999998700 ) ; +#671 = CARTESIAN_POINT ( 'NONE', ( 11.83501444613926900, -27.10663845492439300, 19.57983347029343700 ) ) ; +#672 = CARTESIAN_POINT ( 'NONE', ( 8.766058495799809300, -12.49999999999999600, 14.92608873137994300 ) ) ; +#673 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -31.29513776008465000, 28.74509265499354200 ) ) ; +#674 = CARTESIAN_POINT ( 'NONE', ( 29.19742577891392400, -100.0000000000000100, 21.31254701124258900 ) ) ; +#675 = AXIS2_PLACEMENT_3D ( 'NONE', #6618, #9611, #8689 ) ; +#676 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#677 = CARTESIAN_POINT ( 'NONE', ( 19.93130776465672600, -19.87468148800595100, 23.25870750476283500 ) ) ; +#678 = CARTESIAN_POINT ( 'NONE', ( 6.673873749616568300, -30.87200404519194300, 22.84998353888570900 ) ) ; +#679 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 9.500000000000000000, -22.50000000000000000 ) ) ; +#680 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#681 = CARTESIAN_POINT ( 'NONE', ( 11.13269925344306300, -30.69297538160148200, 26.97559590910263700 ) ) ; +#682 = FACE_OUTER_BOUND ( 'NONE', #2000, .T. ) ; +#683 = CARTESIAN_POINT ( 'NONE', ( 38.97781219066490600, -8.744660101403466600, -24.85982901712879600 ) ) ; +#684 = ORIENTED_EDGE ( 'NONE', *, *, #12997, .T. ) ; +#685 = CARTESIAN_POINT ( 'NONE', ( 32.86966708036036500, -30.75188207044419600, 27.39491921293190700 ) ) ; +#686 = CARTESIAN_POINT ( 'NONE', ( 3.952185763118827300, -17.90684537439851500, -12.19555059547367100 ) ) ; +#687 = LINE ( 'NONE', #14, #393 ) ; +#688 = CARTESIAN_POINT ( 'NONE', ( 4.317352758243643500, -18.63470551648717700, -10.19789072676741300 ) ) ; +#689 = CARTESIAN_POINT ( 'NONE', ( 13.35395141066844400, -30.86424268285456300, 27.80524411440246600 ) ) ; +#690 = CARTESIAN_POINT ( 'NONE', ( 9.428086361380007200, -30.88044911558904800, 25.95826476517031300 ) ) ; +#691 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000032000, -30.99851639274612200, 28.91309459425310600 ) ) ; +#692 = CARTESIAN_POINT ( 'NONE', ( 6.693624030338710000, -8.169523692840964900, -24.99086388681946500 ) ) ; +#693 = CARTESIAN_POINT ( 'NONE', ( 3.844629486347477700, -11.23571604708997100, -22.46755997374653900 ) ) ; +#694 = CARTESIAN_POINT ( 'NONE', ( 38.07604086955856100, -29.96526500587664200, 24.31428122353547700 ) ) ; +#695 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #9349, #6441, #1387, #8521 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 1.570796326794896300 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243650500, 0.8047378541243650500, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#696 = EDGE_CURVE ( 'NONE', #5489, #6473, #4663, .T. ) ; +#697 = FACE_OUTER_BOUND ( 'NONE', #1419, .T. ) ; +#698 = CARTESIAN_POINT ( 'NONE', ( 34.64664556773352200, -30.77111726045405500, 26.56527488445926400 ) ) ; +#699 = CARTESIAN_POINT ( 'NONE', ( 32.64812971228304400, -30.52484004241603400, 27.50175917341315600 ) ) ; +#700 = AXIS2_PLACEMENT_3D ( 'NONE', #11818, #5734, #12779 ) ; +#701 = CARTESIAN_POINT ( 'NONE', ( 4.211034139253129600, -18.42206827850615300, -10.75343557470893800 ) ) ; +#702 = CARTESIAN_POINT ( 'NONE', ( 7.559676958953836800, -30.48151686183728900, 24.80516753402047700 ) ) ; +#703 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669239500, -0.9848077530122092400 ) ) ; +#704 = CARTESIAN_POINT ( 'NONE', ( 33.70231953152313800, -95.07596123492977800, 7.225344253366804600 ) ) ; +#705 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, 9.500000000000000000, -23.00000000000000000 ) ) ; +#706 = CARTESIAN_POINT ( 'NONE', ( 39.81034148690118000, -29.74622587239018000, 22.16457331351145400 ) ) ; +#707 = CYLINDRICAL_SURFACE ( 'NONE', #6095, 2.500000000000000900 ) ; +#708 = CARTESIAN_POINT ( 'NONE', ( 7.985328789547191200, -28.83242424160877300, 24.67659536212677200 ) ) ; +#709 = CARTESIAN_POINT ( 'NONE', ( 9.146494699878928700, -100.0000000000000300, 0.2282800123429834000 ) ) ; +#710 = CARTESIAN_POINT ( 'NONE', ( 36.35265813302435600, -30.91406731396043700, 25.35259676681934200 ) ) ; +#711 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#712 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#713 = EDGE_CURVE ( 'NONE', #8742, #3107, #10987, .T. ) ; +#714 = CARTESIAN_POINT ( 'NONE', ( 44.61668111612058900, -6.986684360041239800, 17.50996267493953700 ) ) ; +#715 = CARTESIAN_POINT ( 'NONE', ( 10.76370865896492600, -12.34547275412262100, 24.58643444490503400 ) ) ; +#716 = CARTESIAN_POINT ( 'NONE', ( 7.826032883979546100, -95.07596123493895800, 14.34932200963168500 ) ) ; +#717 = CARTESIAN_POINT ( 'NONE', ( 5.947510768248532600, -30.03960888342991700, 23.15378805818035000 ) ) ; +#718 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#719 = CARTESIAN_POINT ( 'NONE', ( 34.26524378724549500, -23.59796562115287300, -24.18601848198129600 ) ) ; +#720 = CARTESIAN_POINT ( 'NONE', ( 11.15940979465248100, -30.23471067354299900, 26.99747119678884700 ) ) ; +#721 = VECTOR ( 'NONE', #3494, 1000.000000000000000 ) ; +#722 = CARTESIAN_POINT ( 'NONE', ( 1.882443819975100400, -8.912887831469330300, -23.07785192932279700 ) ) ; +#723 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6732, #12743, #1657, #8796 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001258833537902828800 ), + .UNSPECIFIED. ) ; +#724 = CARTESIAN_POINT ( 'NONE', ( 40.18532719015433900, -8.797406667357202900, -24.83343436843921400 ) ) ; +#725 = CARTESIAN_POINT ( 'NONE', ( 32.86134371143955200, -30.98186243689004000, 27.33231122787562800 ) ) ; +#726 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#727 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10975, #3831, #8993, #2873, #10006, #3875, #11017, #4908, #12016, #5935, #12968, #6991, #898, #8023, #1908, #9043, #2916, #10047, #3919, #11063, #4952, #12056, #5982, #13010, #7038, #947, #8066, #1946, #9085, #2962, #10084, #3961, #11111, #4990 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.003276775052284994500, 0.004915162578427491500, 0.006553550104569988100, 0.009830325156854981300, 0.01146871268299747900, 0.01310710020913997600, 0.01474548773528247400, 0.01556468149835371500, 0.01638387526142495700, 0.01966065031370995900, 0.02129903783985246500, 0.02293742536599496400, 0.02457581289213746700, 0.02539500665520871800, 0.02580460353674434900, 0.02621420041827998000 ), + .UNSPECIFIED. ) ; +#728 = CARTESIAN_POINT ( 'NONE', ( 11.30969582344837900, -20.50592124487531700, 20.33288871347672000 ) ) ; +#729 = CARTESIAN_POINT ( 'NONE', ( 4.175393524012256400, -18.35078704802440400, -10.93839980819588200 ) ) ; +#730 = CARTESIAN_POINT ( 'NONE', ( 13.35519319250092700, -30.81014361212243100, 27.81621363830603100 ) ) ; +#731 = ORIENTED_EDGE ( 'NONE', *, *, #11421, .T. ) ; +#732 = CARTESIAN_POINT ( 'NONE', ( 9.428086560597121100, -30.09888837390558100, 26.09608920499165300 ) ) ; +#733 = CARTESIAN_POINT ( 'NONE', ( 44.85246577432614100, -6.232216501589003400, 16.97531484305729100 ) ) ; +#734 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -27.09143239524033600, 6.754920151478383000 ) ) ; +#735 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -12.49999999999998400, -10.20941827348498200 ) ) ; +#736 = CIRCLE ( 'NONE', #9499, 1.200000000000008400 ) ; +#737 = CARTESIAN_POINT ( 'NONE', ( 37.76001230165243100, -30.91548188963597000, 23.86730374316949000 ) ) ; +#738 = CARTESIAN_POINT ( 'NONE', ( 26.20951684491319300, -23.01543840349336600, -27.29497295629146700 ) ) ; +#739 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2099, #2023, #2007 ), + ( #1979, #1962, #1895 ), + ( #1877, #1849, #1935 ), + ( #1921, #1829, #1763 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( -3.621235256101584800E-015, 0.004625612329664369000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7941643989882858400, 1.000000000000000000), + ( 1.000000000000000000, 0.7941643989882858400, 1.000000000000000000), + ( 1.000000000000000000, 0.7941643989882858400, 1.000000000000000000), + ( 1.000000000000000000, 0.7941643989882858400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#740 = CARTESIAN_POINT ( 'NONE', ( 34.40858120339176200, -30.07085959138435200, 26.70366484089148800 ) ) ; +#741 = CARTESIAN_POINT ( 'NONE', ( 35.06068172505622000, -29.88890170932657500, 26.31659899926836800 ) ) ; +#742 = VERTEX_POINT ( 'NONE', #715 ) ; +#743 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -5.000000000000002700, -19.35342349036134000 ) ) ; +#744 = CARTESIAN_POINT ( 'NONE', ( 4.111951673738156300, -18.22390334747619900, -11.20505579334323800 ) ) ; +#745 = CARTESIAN_POINT ( 'NONE', ( 7.801810792891940200, -29.48549245624612800, 24.72597755346260900 ) ) ; +#746 = ORIENTED_EDGE ( 'NONE', *, *, #4674, .T. ) ; +#747 = CARTESIAN_POINT ( 'NONE', ( 6.353505966356502600, -30.75416420753312300, 22.30742832438297900 ) ) ; +#748 = CARTESIAN_POINT ( 'NONE', ( 28.91211803485425200, -89.23582230748408500, 10.53559886736074500 ) ) ; +#749 = DIRECTION ( 'NONE', ( 0.8183143051770276300, 0.5747709960868230300, 0.0000000000000000000 ) ) ; +#750 = AXIS2_PLACEMENT_3D ( 'NONE', #11820, #5736, #12781 ) ; +#751 = CARTESIAN_POINT ( 'NONE', ( 38.78451071652489200, -30.68349037260169600, 22.01629661536594900 ) ) ; +#752 = VERTEX_POINT ( 'NONE', #843 ) ; +#753 = CARTESIAN_POINT ( 'NONE', ( 40.36483225804278900, -30.00243691922137000, 21.55795181842199100 ) ) ; +#754 = ORIENTED_EDGE ( 'NONE', *, *, #9818, .F. ) ; +#755 = CARTESIAN_POINT ( 'NONE', ( 36.21584715095132600, -29.71935416678406100, 25.56054740236206200 ) ) ; +#756 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 1.368992230496410200, -7.763940748012489100 ) ) ; +#757 = CARTESIAN_POINT ( 'NONE', ( 25.97809193273948100, -23.91211640039854900, -27.43183017885255400 ) ) ; +#758 = ORIENTED_EDGE ( 'NONE', *, *, #7340, .T. ) ; +#759 = CARTESIAN_POINT ( 'NONE', ( 44.90583649584625200, -5.981106243855999900, 16.43740178108457100 ) ) ; +#760 = CARTESIAN_POINT ( 'NONE', ( 43.00000000000000000, 9.500000000000000000, -24.99999999999999600 ) ) ; +#761 = CARTESIAN_POINT ( 'NONE', ( 11.67362617290610100, -94.71789415301168400, 17.26249518529278900 ) ) ; +#762 = CARTESIAN_POINT ( 'NONE', ( 6.672401584039198100, -29.04449191247115900, 23.17211511404805400 ) ) ; +#763 = CARTESIAN_POINT ( 'NONE', ( 6.644409189235431300, -8.527540775024055700, -24.96881834379958000 ) ) ; +#764 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -22.47141460470533800, -12.95292424475502800 ) ) ; +#765 = CARTESIAN_POINT ( 'NONE', ( 11.23580696082549800, -30.82913376717624100, 26.98785254231483300 ) ) ; +#766 = ORIENTED_EDGE ( 'NONE', *, *, #12859, .T. ) ; +#767 = CARTESIAN_POINT ( 'NONE', ( 12.03181762727633100, -19.26433882597574200, 21.04076111392600300 ) ) ; +#768 = CARTESIAN_POINT ( 'NONE', ( 14.74929690644720800, -21.28024769642944800, 29.99586342964232000 ) ) ; +#769 = ORIENTED_EDGE ( 'NONE', *, *, #4657, .T. ) ; +#770 = CARTESIAN_POINT ( 'NONE', ( 39.84348837190141500, -11.17640842806491900, -23.86639343472694100 ) ) ; +#771 = CARTESIAN_POINT ( 'NONE', ( 32.66684153438007600, -30.70947492869668600, 27.47996368208716300 ) ) ; +#772 = CARTESIAN_POINT ( 'NONE', ( 19.94237873759179900, -27.96664356504567900, 27.45669629622856800 ) ) ; +#773 = CARTESIAN_POINT ( 'NONE', ( 12.16678957847089400, -27.14146400895301900, 19.78085212556108600 ) ) ; +#774 = CARTESIAN_POINT ( 'NONE', ( 4.089022768039836100, -18.17804553607956200, -11.29341523166380800 ) ) ; +#775 = CARTESIAN_POINT ( 'NONE', ( 13.35400658401618100, -30.74728044846519700, 27.82594195163919400 ) ) ; +#776 = CARTESIAN_POINT ( 'NONE', ( 9.581751453956115900, -31.11681147790132200, 25.87829160690506600 ) ) ; +#777 = CARTESIAN_POINT ( 'NONE', ( -3.811648262644350000E-018, 9.723952627011019700, 19.19887574203256600 ) ) ; +#778 = CARTESIAN_POINT ( 'NONE', ( 9.624769990129273400, -20.86570712388280700, 18.86206652551760100 ) ) ; +#779 = CARTESIAN_POINT ( 'NONE', ( 34.16939331951962800, -100.0000000000000100, 2.561698833008323000 ) ) ; +#780 = ORIENTED_EDGE ( 'NONE', *, *, #11999, .F. ) ; +#781 = ORIENTED_EDGE ( 'NONE', *, *, #5191, .T. ) ; +#782 = CARTESIAN_POINT ( 'NONE', ( 37.73029899882533300, -29.56818308724292900, 24.37851210265184700 ) ) ; +#783 = VERTEX_POINT ( 'NONE', #1370 ) ; +#784 = CARTESIAN_POINT ( 'NONE', ( 32.05992669542688100, -21.53181316707593900, -25.54527406102811700 ) ) ; +#785 = CARTESIAN_POINT ( 'NONE', ( 34.45789955074317800, -30.63130285935555000, 26.70234964348637900 ) ) ; +#786 = CARTESIAN_POINT ( 'NONE', ( 37.23612234800567900, -29.30441596538850700, 24.53341539781324000 ) ) ; +#787 = CARTESIAN_POINT ( 'NONE', ( 15.45093844490859600, -30.77347370972946200, 28.36765821957494200 ) ) ; +#788 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -99.99999999999998600, 21.63057173623876000 ) ) ; +#789 = ORIENTED_EDGE ( 'NONE', *, *, #12993, .F. ) ; +#790 = CARTESIAN_POINT ( 'NONE', ( 7.877341568533053900, -30.86011534490634000, 24.73037037335097600 ) ) ; +#791 = CARTESIAN_POINT ( 'NONE', ( 18.79084183366109100, -23.01570646313135200, -27.29502022243071500 ) ) ; +#792 = LOCAL_TIME ( 17, 45, 49.00000000000000000, #3464 ) ; +#793 = CARTESIAN_POINT ( 'NONE', ( 8.038079243540213500, -31.12201597179348100, 24.50313822273943700 ) ) ; +#794 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669238900, 0.9848077530122092400 ) ) ; +#795 = CARTESIAN_POINT ( 'NONE', ( 44.98388475980063100, 9.827245291872252200, -22.99677695196011500 ) ) ; +#796 = EDGE_CURVE ( 'NONE', #8895, #500, #4114, .T. ) ; +#797 = CARTESIAN_POINT ( 'NONE', ( 39.39871417467347200, -29.44915904073942400, 22.53504229596046200 ) ) ; +#798 = CARTESIAN_POINT ( 'NONE', ( 25.70478907309390600, -33.33513594658892700, 26.50810550723551600 ) ) ; +#799 = CARTESIAN_POINT ( 'NONE', ( 36.34000157175678000, -30.58631277190587700, 25.57936913415916200 ) ) ; +#800 = CARTESIAN_POINT ( 'NONE', ( 6.182242134165512900, -10.05454186697140400, 25.00000000000000400 ) ) ; +#801 = CARTESIAN_POINT ( 'NONE', ( 27.86759476922533100, -20.85169945048021100, -26.63549895847784700 ) ) ; +#802 = ORIENTED_EDGE ( 'NONE', *, *, #6301, .T. ) ; +#803 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -30.66316004086981200, 28.85652737809770900 ) ) ; +#804 = CARTESIAN_POINT ( 'NONE', ( 18.87246926233491400, -95.07596123493894400, 16.93034213519596800 ) ) ; +#805 = CIRCLE ( 'NONE', #7532, 5.000000000000000000 ) ; +#806 = CARTESIAN_POINT ( 'NONE', ( 6.259393337267433700, -30.39872814172546700, 23.31017616396914200 ) ) ; +#807 = ORIENTED_EDGE ( 'NONE', *, *, #5433, .F. ) ; +#808 = CARTESIAN_POINT ( 'NONE', ( 0.5278691658340004500, -11.05573833166792000, -11.53187062879840900 ) ) ; +#809 = CARTESIAN_POINT ( 'NONE', ( 11.24259026893574800, -30.39753561066750000, 27.04885892099389700 ) ) ; +#810 = CARTESIAN_POINT ( 'NONE', ( 9.437972247952336200, -19.38349287317598200, 18.92938277135209200 ) ) ; +#811 = CARTESIAN_POINT ( 'NONE', ( 32.03206591982599600, -20.27913217082134200, 21.44357368818718300 ) ) ; +#812 = CARTESIAN_POINT ( 'NONE', ( 41.04031121674310600, -10.11805718721510400, -23.37606930273051400 ) ) ; +#813 = CARTESIAN_POINT ( 'NONE', ( 32.66241324897187300, -30.94620218606650000, 27.42438808802129200 ) ) ; +#814 = CARTESIAN_POINT ( 'NONE', ( 3.949813413549676100, -17.89962682709924400, -11.53187062879840700 ) ) ; +#815 = CARTESIAN_POINT ( 'NONE', ( 4.046774674403538400, -18.09354934880696700, -11.41182292131430600 ) ) ; +#816 = CARTESIAN_POINT ( 'NONE', ( 13.56034806946253800, -30.82801193947154800, 27.87666970026479900 ) ) ; +#817 = ORIENTED_EDGE ( 'NONE', *, *, #12609, .T. ) ; +#818 = VECTOR ( 'NONE', #12737, 1000.000000000000000 ) ; +#819 = CARTESIAN_POINT ( 'NONE', ( 9.481303274351454000, -30.39678450845265800, 26.16401548571320700 ) ) ; +#820 = CARTESIAN_POINT ( 'NONE', ( 9.825165212513480700, -94.72973801205361600, 16.44956712399787000 ) ) ; +#821 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -5.000000000000000900, 22.50000000000000400 ) ) ; +#822 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#823 = CARTESIAN_POINT ( 'NONE', ( 5.015412406629749000, -29.82654460640750900, 21.58857427369701700 ) ) ; +#824 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7554, #8084, #8144, #7522, #7510, #7501, #7467, #7436, #7410, #7388, #7372, #7364, #7342, #7329, #7318, #7298 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3.469446951953613800E-018, 0.0006675123569200201100, 0.001335024713840036800, 0.002002537070760053600, 0.002670049427680070000, 0.003337561784600086900, 0.004005074141520103800, 0.005340098855360135700 ), + .UNSPECIFIED. ) ; +#825 = CARTESIAN_POINT ( 'NONE', ( 37.84827333177487700, -30.59769905595034000, 24.30659678776111900 ) ) ; +#826 = CARTESIAN_POINT ( 'NONE', ( 29.02306779715925700, -15.54226244410271100, -25.97725040306250600 ) ) ; +#827 = CARTESIAN_POINT ( 'NONE', ( 34.40845232656040800, -31.11525762353472800, 26.51926045229982500 ) ) ; +#828 = CARTESIAN_POINT ( 'NONE', ( 38.18217007558261900, -29.07543966461614500, 23.38011796863743500 ) ) ; +#829 = FACE_OUTER_BOUND ( 'NONE', #10003, .T. ) ; +#830 = CARTESIAN_POINT ( 'NONE', ( 2.195005114781025700, 11.48776909978549900, -24.02497442609470500 ) ) ; +#831 = ORIENTED_EDGE ( 'NONE', *, *, #13032, .T. ) ; +#832 = CARTESIAN_POINT ( 'NONE', ( 7.791771155794909200, -29.92014072176800000, 24.99033662497735300 ) ) ; +#833 = CARTESIAN_POINT ( 'NONE', ( 17.71508646995377800, -19.12228505114364900, -26.60850498023006200 ) ) ; +#834 = CARTESIAN_POINT ( 'NONE', ( 10.40565021204227800, -31.12841248613045400, 26.40297982068992200 ) ) ; +#835 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 12.00000000000000000, -22.50000000000000000 ) ) ; +#836 = CARTESIAN_POINT ( 'NONE', ( 42.89755382205275700, 11.02497441041343700, -24.48776911026339000 ) ) ; +#837 = CARTESIAN_POINT ( 'NONE', ( 38.89632301863142100, -30.62796048987463800, 22.32484216001915600 ) ) ; +#838 = CARTESIAN_POINT ( 'NONE', ( 38.94931178141813900, -28.87043262030299200, 21.75755471858347400 ) ) ; +#839 = CARTESIAN_POINT ( 'NONE', ( 36.00235488791344100, -29.63020513266419800, 25.64874191603014400 ) ) ; +#840 = CARTESIAN_POINT ( 'NONE', ( 9.560792199034301200, -9.678943640507027300, 25.00000000000000000 ) ) ; +#841 = CARTESIAN_POINT ( 'NONE', ( 31.28456349669255600, -18.04194217424260000, -26.89642070221895100 ) ) ; +#842 = AXIS2_PLACEMENT_3D ( 'NONE', #6530, #11601, #1470 ) ; +#843 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -12.49999999999999300, 9.327783369942690000 ) ) ; +#844 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -19.99999999999988300, 8.005331014629282600 ) ) ; +#845 = CARTESIAN_POINT ( 'NONE', ( 6.599478182925651900, -29.23878754062883400, 23.39393859593035400 ) ) ; +#846 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -19.99999999999989700, 8.005331014629277300 ) ) ; +#847 = CARTESIAN_POINT ( 'NONE', ( 18.79412393078570900, -99.99999999999998600, 21.63052375797860100 ) ) ; +#848 = CARTESIAN_POINT ( 'NONE', ( 11.44497286383857600, -30.98856052195402800, 27.02459770839711000 ) ) ; +#849 = CARTESIAN_POINT ( 'NONE', ( 7.271790248536498200, -19.53982784490135300, 16.15929056471050600 ) ) ; +#850 = CARTESIAN_POINT ( 'NONE', ( 35.37538815353362100, -20.86575217069554000, 18.86190488498147000 ) ) ; +#851 = CARTESIAN_POINT ( 'NONE', ( 24.90395277378104000, -27.96340406021231200, 27.45756719881666500 ) ) ; +#852 = CARTESIAN_POINT ( 'NONE', ( 32.25955895769049400, -30.68358323767609600, 27.63110281207959700 ) ) ; +#853 = ORIENTED_EDGE ( 'NONE', *, *, #2601, .F. ) ; +#854 = CARTESIAN_POINT ( 'NONE', ( 4.031303308612301400, -18.06260661722449300, -11.44922899661748200 ) ) ; +#855 = CARTESIAN_POINT ( 'NONE', ( 13.56012232668557300, -30.79701389911124900, 27.88202382028945400 ) ) ; +#856 = CARTESIAN_POINT ( 'NONE', ( 10.15377145564740900, -19.70011732123438000, -23.93838064273339200 ) ) ; +#857 = CARTESIAN_POINT ( 'NONE', ( 9.861105075081948000, -31.15644972032457000, 26.03875528662876700 ) ) ; +#858 = CARTESIAN_POINT ( 'NONE', ( 10.24732372222732700, -13.95681957569784400, -24.99999999999998900 ) ) ; +#859 = CARTESIAN_POINT ( 'NONE', ( 25.10306456692114800, -19.87568216611861200, 23.25829123793067100 ) ) ; +#860 = CARTESIAN_POINT ( 'NONE', ( 43.95073734173139000, -8.074363754076117100, 17.21664755057805600 ) ) ; +#861 = CARTESIAN_POINT ( 'NONE', ( 6.019597832273841000, -28.88244232793378100, 21.75504533814405100 ) ) ; +#862 = CARTESIAN_POINT ( 'NONE', ( 37.40445929272641500, -29.29161610562554000, 24.38336204127023500 ) ) ; +#863 = CARTESIAN_POINT ( 'NONE', ( 36.28257240179203100, -15.95793663192793100, -26.05054497756130500 ) ) ; +#864 = EDGE_CURVE ( 'NONE', #5489, #3592, #7099, .T. ) ; +#865 = CARTESIAN_POINT ( 'NONE', ( 34.16090780872063000, -30.53559135912270500, 26.85949355313566000 ) ) ; +#866 = CARTESIAN_POINT ( 'NONE', ( 38.70578064788528400, -28.95348135089496100, 22.48990343941046200 ) ) ; +#867 = CIRCLE ( 'NONE', #4048, 2.500000000000000900 ) ; +#868 = CARTESIAN_POINT ( 'NONE', ( 18.46734478967501800, -30.69526457894230700, 28.85086468261633300 ) ) ; +#869 = CARTESIAN_POINT ( 'NONE', ( 8.337375794521301800, -31.12707320537109400, 24.82198584154036400 ) ) ; +#870 = CARTESIAN_POINT ( 'NONE', ( 8.889219104393383500, -19.76534932450839600, -22.73681349279604900 ) ) ; +#871 = CARTESIAN_POINT ( 'NONE', ( 12.94427334411280300, -30.90293848535164400, 27.66098116386740100 ) ) ; +#872 = CARTESIAN_POINT ( 'NONE', ( 10.50343407402117700, -19.14069283850386700, -24.51831894406026500 ) ) ; +#873 = CARTESIAN_POINT ( 'NONE', ( 43.32171584982495500, 11.91542889174562200, -23.32171584982515700 ) ) ; +#874 = CARTESIAN_POINT ( 'NONE', ( 38.78010288483675800, -29.12460240331817800, 22.79475732524315000 ) ) ; +#875 = ORIENTED_EDGE ( 'NONE', *, *, #1448, .F. ) ; +#876 = ORIENTED_EDGE ( 'NONE', *, *, #12152, .F. ) ; +#877 = CARTESIAN_POINT ( 'NONE', ( 16.42143636959045200, -22.74483964053881400, -26.89892536198150100 ) ) ; +#878 = CARTESIAN_POINT ( 'NONE', ( 42.49999999999999300, 12.00000000000000000, 25.00000000000000400 ) ) ; +#879 = VECTOR ( 'NONE', #1011, 999.9999999999998900 ) ; +#880 = CARTESIAN_POINT ( 'NONE', ( 36.16787720275937800, -30.40618318184118300, 25.74979176902593600 ) ) ; +#881 = EDGE_CURVE ( 'NONE', #9515, #607, #1990, .T. ) ; +#882 = CARTESIAN_POINT ( 'NONE', ( 10.44761820505748200, -12.32258475461222100, 24.41382241099877600 ) ) ; +#883 = CARTESIAN_POINT ( 'NONE', ( 35.81477926250298100, -23.45232266960849200, -22.69917885609324400 ) ) ; +#884 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9701, #2514, #7669, #554, #6626, #12652, #5584, #11685, #4542, #2600 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001796601494223786800, 0.002694902241335677000, 0.003144052614891619000, 0.003593202988447561000 ), + .UNSPECIFIED. ) ; +#885 = EDGE_CURVE ( 'NONE', #1672, #11262, #4349, .T. ) ; +#886 = CARTESIAN_POINT ( 'NONE', ( 5.315535670176605400, -96.31691071131611200, 12.92966801874701900 ) ) ; +#887 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#888 = CARTESIAN_POINT ( 'NONE', ( 3.608792849019904800, -7.567504176424027000, -25.16587366121733600 ) ) ; +#889 = CARTESIAN_POINT ( 'NONE', ( 6.805112284874035700, -30.80410359851152400, 23.41846799792864100 ) ) ; +#890 = CARTESIAN_POINT ( 'NONE', ( 6.773556745216057000, -100.0000000000000100, 18.22042776060029100 ) ) ; +#891 = CARTESIAN_POINT ( 'NONE', ( 11.43073198913075200, -30.60492453913314000, 27.12477601985781900 ) ) ; +#892 = ORIENTED_EDGE ( 'NONE', *, *, #10758, .T. ) ; +#893 = CARTESIAN_POINT ( 'NONE', ( 5.814057468731683700, -19.71650843438795100, 13.02987149264080800 ) ) ; +#894 = CARTESIAN_POINT ( 'NONE', ( 37.02524706999627600, -94.72219806545337000, 15.44556310733654100 ) ) ; +#895 = CARTESIAN_POINT ( 'NONE', ( 32.49600784241386700, -9.982512379478441400, -24.99999999999998600 ) ) ; +#896 = CARTESIAN_POINT ( 'NONE', ( 32.25956171771434100, -30.85599047234996900, 27.60070171379977600 ) ) ; +#897 = FACE_OUTER_BOUND ( 'NONE', #9362, .T. ) ; +#898 = CARTESIAN_POINT ( 'NONE', ( 8.965991790484949300, -36.63810358511964400, 15.40218266578076500 ) ) ; +#899 = CARTESIAN_POINT ( 'NONE', ( 8.394411339457470000, -28.81846823313776100, 25.07554503328098900 ) ) ; +#900 = CARTESIAN_POINT ( 'NONE', ( 3.994494338971800800, -17.98898867794349600, -11.50980249051473500 ) ) ; +#901 = CARTESIAN_POINT ( 'NONE', ( 13.66283609012915600, -30.83353854944948900, 27.90655929843568100 ) ) ; +#902 = EDGE_CURVE ( 'NONE', #4830, #2167, #1385, .T. ) ; +#903 = CARTESIAN_POINT ( 'NONE', ( 9.763440187008058000, -30.59320262758372900, 26.30043981064602200 ) ) ; +#904 = CARTESIAN_POINT ( 'NONE', ( 10.97330804032073800, -16.84831001779364000, -24.88523528509216800 ) ) ; +#905 = EDGE_LOOP ( 'NONE', ( #4393, #4412, #4529, #4659, #4819, #4872, #5014, #5341, #5473, #5639 ) ) ; +#906 = CARTESIAN_POINT ( 'NONE', ( 42.04852073202972900, -10.83860597525845600, -21.35820448156401600 ) ) ; +#907 = CARTESIAN_POINT ( 'NONE', ( 34.40692542508801200, -97.47454744054816400, 20.43096686776889800 ) ) ; +#908 = ORIENTED_EDGE ( 'NONE', *, *, #13075, .T. ) ; +#909 = CARTESIAN_POINT ( 'NONE', ( 5.318770984709581200, -30.19452881440878800, 21.59202769087931300 ) ) ; +#910 = CARTESIAN_POINT ( 'NONE', ( 37.79351901772219700, -30.32289469944191800, 24.57814317721516800 ) ) ; +#911 = ORIENTED_EDGE ( 'NONE', *, *, #3819, .T. ) ; +#912 = CARTESIAN_POINT ( 'NONE', ( 40.33053745150519400, -16.97221673688751800, -18.30237195620564700 ) ) ; +#913 = CARTESIAN_POINT ( 'NONE', ( 34.13564095959062400, -31.02352998845227100, 26.72018537878638600 ) ) ; +#914 = CARTESIAN_POINT ( 'NONE', ( 43.00000000000000000, 9.500000000000000000, -23.00000000000000000 ) ) ; +#915 = ORIENTED_EDGE ( 'NONE', *, *, #12189, .T. ) ; +#916 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#917 = CARTESIAN_POINT ( 'NONE', ( 23.43081808544310000, -9.999999999999994700, 28.25125882508523700 ) ) ; +#918 = ORIENTED_EDGE ( 'NONE', *, *, #5149, .F. ) ; +#919 = CARTESIAN_POINT ( 'NONE', ( 8.094945407309388900, -30.27612286790620300, 25.26544151848741000 ) ) ; +#920 = CARTESIAN_POINT ( 'NONE', ( 8.718125078539634000, -15.95833183991621200, -26.05061466339108700 ) ) ; +#921 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#922 = CARTESIAN_POINT ( 'NONE', ( 24.84990674714293800, -28.77556518705056400, 29.18936127947247500 ) ) ; +#923 = CARTESIAN_POINT ( 'NONE', ( 42.49999999999999300, 12.00000000000000000, -22.50000000000000000 ) ) ; +#924 = AXIS2_PLACEMENT_3D ( 'NONE', #10539, #3446, #10576 ) ; +#925 = ORIENTED_EDGE ( 'NONE', *, *, #713, .T. ) ; +#926 = CARTESIAN_POINT ( 'NONE', ( 39.24154980381438000, -30.30601363535583600, 22.60673088205808100 ) ) ; +#927 = CARTESIAN_POINT ( 'NONE', ( 11.48976332991796700, -20.47725215763321700, 20.46587052946454900 ) ) ; +#928 = ORIENTED_EDGE ( 'NONE', *, *, #12079, .F. ) ; +#929 = CARTESIAN_POINT ( 'NONE', ( 36.00279609823182600, -31.16677953189585200, 25.37844500421122600 ) ) ; +#930 = CARTESIAN_POINT ( 'NONE', ( 34.48360658278501500, -16.08864526617715600, -24.88315790306844700 ) ) ; +#931 = CARTESIAN_POINT ( 'NONE', ( 37.23179450051491600, -20.49791108259370600, -20.51644667051814600 ) ) ; +#932 = ORIENTED_EDGE ( 'NONE', *, *, #1463, .F. ) ; +#933 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -95.26318031278478300, 10.28785978983546000 ) ) ; +#934 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #10360, #2213, #4238 ), + ( #11383, #5263, #12359 ), + ( #6304, #251, #7358 ), + ( #1257, #8384, #2260 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( -3.295974604355933500E-017, 0.004071859375130079500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7936335741122168000, 1.000000000000000000), + ( 1.000000000000000000, 0.7939205733362377800, 1.000000000000000000), + ( 1.000000000000000000, 0.7940541409243576700, 1.000000000000000000), + ( 1.000000000000000000, 0.7941272348232408800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#935 = CARTESIAN_POINT ( 'NONE', ( 11.73123118879252000, -7.702217768147555400, -31.22838172799840400 ) ) ; +#936 = CARTESIAN_POINT ( 'NONE', ( 6.514196534651464500, -29.72340557220962200, 23.77520869586915700 ) ) ; +#937 = CARTESIAN_POINT ( 'NONE', ( 39.78008003123072500, -30.10949015855741000, 21.53907437498750000 ) ) ; +#938 = CARTESIAN_POINT ( 'NONE', ( 32.05501697418559800, -30.77248962702719100, 27.68908019638042400 ) ) ; +#939 = PLANE ( 'NONE', #2881 ) ; +#940 = CARTESIAN_POINT ( 'NONE', ( 11.54815654476677100, -31.03717696199586800, 27.05067816379959600 ) ) ; +#941 = CARTESIAN_POINT ( 'NONE', ( 5.150057523348651900, -19.87730100016922900, 10.17963903652877600 ) ) ; +#942 = CARTESIAN_POINT ( 'NONE', ( 44.56543580968448700, -7.119228409937238500, -20.19243365032257400 ) ) ; +#943 = ORIENTED_EDGE ( 'NONE', *, *, #12339, .F. ) ; +#944 = CARTESIAN_POINT ( 'NONE', ( 33.29527624858837200, -9.794803466949257900, -25.00000000000000000 ) ) ; +#945 = CARTESIAN_POINT ( 'NONE', ( 32.05550453100526900, -30.66882592915502700, 27.70307080137628800 ) ) ; +#946 = EDGE_LOOP ( 'NONE', ( #4771, #5428, #6058, #6718 ) ) ; +#947 = CARTESIAN_POINT ( 'NONE', ( 5.137176870989609500, -29.24818328054200100, 8.473425291599054900 ) ) ; +#948 = CARTESIAN_POINT ( 'NONE', ( 12.33463281541846600, -27.15670248140976300, 19.87856920567513400 ) ) ; +#949 = CARTESIAN_POINT ( 'NONE', ( 40.36483207853911600, -29.41891771981579100, 21.66084199703859500 ) ) ; +#950 = ORIENTED_EDGE ( 'NONE', *, *, #4715, .F. ) ; +#951 = CARTESIAN_POINT ( 'NONE', ( 13.66312810143846500, -30.81858041026359300, 27.90928189601858000 ) ) ; +#952 = EDGE_CURVE ( 'NONE', #12966, #8908, #12138, .T. ) ; +#953 = CARTESIAN_POINT ( 'NONE', ( 9.856451458803368500, -29.88646951133489100, 26.27042893424650300 ) ) ; +#954 = CARTESIAN_POINT ( 'NONE', ( 10.50592105382547800, -16.63655602679402500, -24.80432773142155900 ) ) ; +#955 = CARTESIAN_POINT ( 'NONE', ( 5.334104726468927600, -29.66266797768497200, 18.52404584118071900 ) ) ; +#956 = CARTESIAN_POINT ( 'NONE', ( 28.64600010851258100, -94.74468260210244400, 18.43866987220912900 ) ) ; +#957 = CARTESIAN_POINT ( 'NONE', ( 5.624619836123323500, -29.06822536098952300, 21.79044128588648000 ) ) ; +#958 = CARTESIAN_POINT ( 'NONE', ( 37.38770134139269900, -31.07266604482332200, 24.05286623627201000 ) ) ; +#959 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#960 = VECTOR ( 'NONE', #12383, 1000.000000000000000 ) ; +#961 = CARTESIAN_POINT ( 'NONE', ( 34.04926472376406800, -30.33862429021858600, 26.91321922156481600 ) ) ; +#962 = CARTESIAN_POINT ( 'NONE', ( 0.5499291924682101500, -10.96605136393330500, 9.822689166537815100 ) ) ; +#963 = VERTEX_POINT ( 'NONE', #13023 ) ; +#964 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000900, 17.50000000000000400 ) ) ; +#965 = CARTESIAN_POINT ( 'NONE', ( 20.04089160292353700, -30.66221338081048100, 28.85669429980772800 ) ) ; +#966 = CARTESIAN_POINT ( 'NONE', ( 8.348379344562776100, -29.45484623716755500, 25.10319171885692700 ) ) ; +#967 = CARTESIAN_POINT ( 'NONE', ( 12.50785627961122700, -9.895524725533142900, -24.98157819029457000 ) ) ; +#968 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#969 = CARTESIAN_POINT ( 'NONE', ( 24.94830178104265500, -27.96429675855996400, 27.45736485622416000 ) ) ; +#970 = EDGE_CURVE ( 'NONE', #3592, #6805, #1368, .T. ) ; +#971 = CARTESIAN_POINT ( 'NONE', ( 38.32737611655633700, -29.04443695229563700, 23.17242093383043800 ) ) ; +#972 = LINE ( 'NONE', #11278, #11761 ) ; +#973 = ORIENTED_EDGE ( 'NONE', *, *, #9482, .T. ) ; +#974 = CARTESIAN_POINT ( 'NONE', ( 8.607617042738525000, -28.81132272559632300, 25.26869500260275800 ) ) ; +#975 = CARTESIAN_POINT ( 'NONE', ( 36.05754431322657200, -30.19319132005489700, 25.82038711818551800 ) ) ; +#976 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -22.36781719137903200, -11.94938068502386800 ) ) ; +#977 = CARTESIAN_POINT ( 'NONE', ( 39.90881592512260300, -17.96544587680434200, -17.87851544105802400 ) ) ; +#978 = CARTESIAN_POINT ( 'NONE', ( 38.43572163521857000, -94.44804360490603300, 7.170630477972227200 ) ) ; +#979 = CARTESIAN_POINT ( 'NONE', ( 21.56918191455692100, -9.999999999999998200, -31.77779843925435800 ) ) ; +#980 = ADVANCED_FACE ( 'NONE', ( #4023, #12741 ), #51, .F. ) ; +#981 = CARTESIAN_POINT ( 'NONE', ( 7.044560920064614400, -30.96828727521021600, 23.37268972713557600 ) ) ; +#982 = DIRECTION ( 'NONE', ( -3.551631410960778700E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#983 = CARTESIAN_POINT ( 'NONE', ( 32.05553183822474500, -30.89985581620308300, 27.66191092675839900 ) ) ; +#984 = CARTESIAN_POINT ( 'NONE', ( 11.52895108706131400, -30.70333839860255400, 27.15348115428477600 ) ) ; +#985 = AXIS2_PLACEMENT_3D ( 'NONE', #7567, #4523, #11668 ) ; +#986 = CYLINDRICAL_SURFACE ( 'NONE', #4647, 2.499999999999998700 ) ; +#987 = CARTESIAN_POINT ( 'NONE', ( 7.915818288026477100, -12.49999999999999300, -13.49202260287540700 ) ) ; +#988 = CARTESIAN_POINT ( 'NONE', ( 33.70055087572918500, -11.30837761893861400, -25.06485974217470400 ) ) ; +#989 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -90.07596123493894400, 15.95758058754439400 ) ) ; +#990 = CARTESIAN_POINT ( 'NONE', ( 12.40238834449669600, -20.34200637606049300, 21.10829408313254200 ) ) ; +#991 = CARTESIAN_POINT ( 'NONE', ( 38.94931178141813900, -28.87043262030299200, 21.75755471858347400 ) ) ; +#992 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344970100, 27.93780948130441300 ) ) ; +#993 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#994 = CARTESIAN_POINT ( 'NONE', ( 9.972541556902204000, -30.80033535252765000, 26.34225603360098600 ) ) ; +#995 = CARTESIAN_POINT ( 'NONE', ( 37.35340395955396500, -14.46251538580245300, -24.99999999997742300 ) ) ; +#996 = CIRCLE ( 'NONE', #1579, 1.200000000000013500 ) ; +#997 = CARTESIAN_POINT ( 'NONE', ( 5.879786737965949900, -30.50266657958525900, 21.60013059417636300 ) ) ; +#998 = CARTESIAN_POINT ( 'NONE', ( 37.44838914107096200, -30.11941566963109600, 24.87773202238065900 ) ) ; +#999 = ORIENTED_EDGE ( 'NONE', *, *, #2439, .F. ) ; +#1000 = AXIS2_PLACEMENT_3D ( 'NONE', #4416, #11560, #5453 ) ; +#1001 = CYLINDRICAL_SURFACE ( 'NONE', #3002, 2.500000000000000900 ) ; +#1002 = CARTESIAN_POINT ( 'NONE', ( 34.05818254405131300, -30.82652443527638300, 26.84638599060999200 ) ) ; +#1003 = CARTESIAN_POINT ( 'NONE', ( 29.60486571348199500, -27.28474772798354700, 21.23681108288926100 ) ) ; +#1004 = CARTESIAN_POINT ( 'NONE', ( 3.972924776300760900, -17.94584955260141300, -11.53187062879842300 ) ) ; +#1005 = CARTESIAN_POINT ( 'NONE', ( 8.288683984527381200, -30.52043887679006300, 25.34242718457401000 ) ) ; +#1006 = CARTESIAN_POINT ( 'NONE', ( 9.627117344029805700, -10.15906570871138800, 24.97195242384867000 ) ) ; +#1007 = CARTESIAN_POINT ( 'NONE', ( -2.512420638850599500E-014, -10.00001795853177500, 7.993697034339843000 ) ) ; +#1008 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000052600, -10.00002293906783600, -11.49744068765724400 ) ) ; +#1009 = CARTESIAN_POINT ( 'NONE', ( 39.05237819514923100, -30.03942649315235500, 23.15397503701424500 ) ) ; +#1010 = LINE ( 'NONE', #9358, #11506 ) ; +#1011 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9848077530122092400, 0.1736481776669238600 ) ) ; +#1012 = CARTESIAN_POINT ( 'NONE', ( 35.97707577029320400, -31.01335576140938600, 25.55836962900493600 ) ) ; +#1013 = CARTESIAN_POINT ( 'NONE', ( 28.14486289140253200, -25.71508572135545000, 21.89512088196810400 ) ) ; +#1014 = CARTESIAN_POINT ( 'NONE', ( 39.85206222033207300, -22.59915862546844400, -14.20009864445823100 ) ) ; +#1015 = AXIS2_PLACEMENT_3D ( 'NONE', #8563, #2420, #9570 ) ; +#1016 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -94.39237608410634600, 1.716882203206928900 ) ) ; +#1017 = ORIENTED_EDGE ( 'NONE', *, *, #3577, .T. ) ; +#1018 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -3.609825003797118800E-016 ) ) ; +#1019 = CARTESIAN_POINT ( 'NONE', ( 1.125429169029362100, -9.999999999999996400, -18.39180495731413200 ) ) ; +#1020 = CARTESIAN_POINT ( 'NONE', ( 6.513630855177687800, -30.06182710497911300, 23.88161949922665200 ) ) ; +#1021 = DIRECTION ( 'NONE', ( -1.000000000000000000, 6.262484432840357400E-017, -3.551631410960778700E-016 ) ) ; +#1022 = CARTESIAN_POINT ( 'NONE', ( 31.74748304424298300, -30.76913040702320500, 27.79034643909957200 ) ) ; +#1023 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, -20.68999999999999400 ) ) ; +#1024 = CARTESIAN_POINT ( 'NONE', ( 11.54810356722401800, -30.32577760683702200, 27.17624158326664100 ) ) ; +#1025 = VECTOR ( 'NONE', #3091, 1000.000000000000000 ) ; +#1026 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -99.99999999999998600, -38.36942826376122900 ) ) ; +#1027 = CARTESIAN_POINT ( 'NONE', ( 13.69885997958199500, -12.50000000000001600, -21.23649547512024300 ) ) ; +#1028 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669239800, -0.9848077530122092400 ) ) ; +#1029 = CARTESIAN_POINT ( 'NONE', ( 13.19157645483056000, -27.22497475875918800, 20.35729831300539100 ) ) ; +#1030 = CARTESIAN_POINT ( 'NONE', ( 9.146494699878928700, -12.49999999999999600, 15.65689082433309100 ) ) ; +#1031 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344970100, 27.93780948130441300 ) ) ; +#1032 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000002100, 9.723952627011014400, -1.698875742032555300 ) ) ; +#1033 = CARTESIAN_POINT ( 'NONE', ( 9.994463732045520700, -30.15188462028022800, 26.41855226746959300 ) ) ; +#1034 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000001400, -100.0000000000000300, -5.267905492818155900 ) ) ; +#1035 = CARTESIAN_POINT ( 'NONE', ( 43.65194847697370100, -8.444298515643927400, 17.39883151790377600 ) ) ; +#1036 = CARTESIAN_POINT ( 'NONE', ( 5.112196481200673900, -29.46140483301890000, 21.78462582103869800 ) ) ; +#1037 = CIRCLE ( 'NONE', #7810, 3.189999999999995100 ) ; +#1038 = CARTESIAN_POINT ( 'NONE', ( 37.15159516136475300, -31.05422133622294100, 24.39974800688137400 ) ) ; +#1039 = CARTESIAN_POINT ( 'NONE', ( 20.15009222793004900, -33.18274856558008400, 28.41225594090786900 ) ) ; +#1040 = ADVANCED_FACE ( 'NONE', ( #9492 ), #6254, .T. ) ; +#1041 = EDGE_CURVE ( 'NONE', #330, #1238, #11540, .T. ) ; +#1042 = CARTESIAN_POINT ( 'NONE', ( 33.84029102231241400, -30.23469419104416600, 26.99759331706398800 ) ) ; +#1043 = CARTESIAN_POINT ( 'NONE', ( 36.39253093618950900, -28.81132762320048700, 25.26856386348692500 ) ) ; +#1044 = EDGE_LOOP ( 'NONE', ( #1855, #1879, #2034, #2174 ) ) ; +#1045 = APPROVAL ( #5166, 'UNSPECIFIED' ) ; +#1046 = CARTESIAN_POINT ( 'NONE', ( 12.90136799010446100, -10.43079757070501200, -25.07596123493895100 ) ) ; +#1047 = CARTESIAN_POINT ( 'NONE', ( 8.480613276098502200, -29.55933624364628900, 25.26813183999065200 ) ) ; +#1048 = CIRCLE ( 'NONE', #9463, 3.189999999999994200 ) ; +#1049 = CARTESIAN_POINT ( 'NONE', ( 10.76370865896492600, -12.34547275412262100, 24.58643444490503400 ) ) ; +#1050 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, -8.819140336990948000, 8.061644291784002500 ) ) ; +#1051 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -8.819417411307938400, -11.66808602911534200 ) ) ; +#1052 = CARTESIAN_POINT ( 'NONE', ( 37.98383816995297500, -31.25046089290926700, 24.60414596916997700 ) ) ; +#1053 = CARTESIAN_POINT ( 'NONE', ( 38.32592051371534600, -30.87214340706392300, 22.85024299928478100 ) ) ; +#1054 = CARTESIAN_POINT ( 'NONE', ( 3.947291911593992600, -17.90254230133306700, -11.79747725693451300 ) ) ; +#1055 = ORIENTED_EDGE ( 'NONE', *, *, #11011, .F. ) ; +#1056 = CARTESIAN_POINT ( 'NONE', ( 35.80292668242142200, -29.87977704215061100, 25.88910259737570000 ) ) ; +#1057 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -21.11591690748280900, -10.17088631934728400 ) ) ; +#1058 = CARTESIAN_POINT ( 'NONE', ( 39.99600612472971800, -20.02368317410715500, -12.14472559014846500 ) ) ; +#1059 = ORIENTED_EDGE ( 'NONE', *, *, #696, .T. ) ; +#1060 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -90.07596123493894400, -4.350951650170366700 ) ) ; +#1061 = CARTESIAN_POINT ( 'NONE', ( 16.94952136305155600, -30.73002225197338100, 28.68783886992779800 ) ) ; +#1062 = CARTESIAN_POINT ( 'NONE', ( 44.15492000030497600, -8.389711229384598600, -19.69998625431987800 ) ) ; +#1063 = CARTESIAN_POINT ( 'NONE', ( 10.57495937070200800, -20.67807147712776200, -23.54672313577466600 ) ) ; +#1064 = CARTESIAN_POINT ( 'NONE', ( 7.045741057009573500, -29.13080757071967900, 23.69599314323171400 ) ) ; +#1065 = CARTESIAN_POINT ( 'NONE', ( 6.596285104290474900, -8.786315565813847400, -24.94719053121910300 ) ) ; +#1066 = CARTESIAN_POINT ( 'NONE', ( 31.74784919087041100, -30.84832030897111800, 27.77585377358365900 ) ) ; +#1067 = CARTESIAN_POINT ( 'NONE', ( 0.7581501066676508100, -8.204891698609008800, 16.35491696969300800 ) ) ; +#1068 = CARTESIAN_POINT ( 'NONE', ( 11.73002123424704700, -30.80573543553109100, 27.21708616588282200 ) ) ; +#1069 = CARTESIAN_POINT ( 'NONE', ( 34.44962244991852900, -100.0000000000000100, -34.01313420148405000 ) ) ; +#1070 = CARTESIAN_POINT ( 'NONE', ( 33.94274892398704700, -12.72492662467618800, 24.51952191561876000 ) ) ; +#1071 = VERTEX_POINT ( 'NONE', #12533 ) ; +#1072 = CARTESIAN_POINT ( 'NONE', ( 4.435202286966987400, -10.10669634051884100, 22.85406412717951200 ) ) ; +#1073 = CARTESIAN_POINT ( 'NONE', ( 9.711516816235477000, -28.77563345024817600, 26.20285209486967300 ) ) ; +#1074 = CARTESIAN_POINT ( 'NONE', ( 39.18270473173934200, -28.86033334487856900, 21.17145047251911900 ) ) ; +#1075 = ORIENTED_EDGE ( 'NONE', *, *, #8934, .T. ) ; +#1076 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344970100, 27.93780948130441300 ) ) ; +#1077 = CARTESIAN_POINT ( 'NONE', ( 41.02722877349815900, -17.94554245300360800, -11.53187062879808000 ) ) ; +#1078 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1079 = CARTESIAN_POINT ( 'NONE', ( 10.38926269432150200, -31.04369800721765700, 26.44882313007418500 ) ) ; +#1080 = CARTESIAN_POINT ( 'NONE', ( 35.87584989280667700, -12.50000000000001100, 15.65768167805735300 ) ) ; +#1081 = CARTESIAN_POINT ( 'NONE', ( 0.9886239130901544000, -7.995904528596171600, -21.58621678475493200 ) ) ; +#1082 = CARTESIAN_POINT ( 'NONE', ( 43.28858390927955200, -8.768782475304226100, 19.36302469731718300 ) ) ; +#1083 = ORIENTED_EDGE ( 'NONE', *, *, #10113, .F. ) ; +#1084 = CARTESIAN_POINT ( 'NONE', ( 6.102242524882839800, -30.60770003124260400, 21.70080942062157400 ) ) ; +#1085 = CARTESIAN_POINT ( 'NONE', ( 37.15344635768932600, -29.77238954493075300, 24.95698599115001300 ) ) ; +#1086 = VERTEX_POINT ( 'NONE', #7248 ) ; +#1087 = CARTESIAN_POINT ( 'NONE', ( 5.216249875932887500, -28.57287779014776400, 17.42932465558941900 ) ) ; +#1088 = CARTESIAN_POINT ( 'NONE', ( 33.86696870891903200, -30.69297941725152500, 26.97573673317492600 ) ) ; +#1089 = CARTESIAN_POINT ( 'NONE', ( 35.06225631224795300, -20.78196122136093000, 19.17190281846552600 ) ) ; +#1090 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 9.024562509492795200E-015, -24.99999999999999600 ) ) ; +#1091 = CARTESIAN_POINT ( 'NONE', ( 11.40575731456750900, -17.07142213206140700, -25.06701809440317400 ) ) ; +#1092 = ORIENTED_EDGE ( 'NONE', *, *, #2486, .F. ) ; +#1093 = CARTESIAN_POINT ( 'NONE', ( 8.628097988761760800, -30.85488699389508600, 25.38881371060830000 ) ) ; +#1094 = CARTESIAN_POINT ( 'NONE', ( 33.30367024968486300, -7.510164318494782200, -31.30913433057071100 ) ) ; +#1095 = CARTESIAN_POINT ( 'NONE', ( 0.5363449227756533800, -11.02906185410295800, 8.929521223321707200 ) ) ; +#1096 = CARTESIAN_POINT ( 'NONE', ( 44.47034638243443500, -11.00332958341145900, -12.66472158443941600 ) ) ; +#1097 = CARTESIAN_POINT ( 'NONE', ( 33.69354002942835500, -32.38391304138798400, 24.73774488322396100 ) ) ; +#1098 = ORIENTED_EDGE ( 'NONE', *, *, #5583, .T. ) ; +#1099 = AXIS2_PLACEMENT_3D ( 'NONE', #12444, #11515, #5410 ) ; +#1100 = CARTESIAN_POINT ( 'NONE', ( 38.80406060710876700, -29.77855519032222300, 23.44071447687475600 ) ) ; +#1101 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7130, #10225, #12230, #6167, #113, #7220, #1124, #8251, #2126, #9262, #3138, #10268, #4149, #11293, #5171, #12272, #6210, #158, #7265, #1167 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( -0.003188432301192967900, -0.001473204767350479900, 0.0002420227664920080400, 0.001957250300334496600, 0.003672477834176983900, 0.005387705368019473800, 0.007102932901861961100, 0.008818160435704448400, 0.009675774202625695600, 0.01053338796954694300 ), + .UNSPECIFIED. ) ; +#1102 = CARTESIAN_POINT ( 'NONE', ( 3.949503762325356600, -17.90541829370126000, -12.06290040461134800 ) ) ; +#1103 = CARTESIAN_POINT ( 'NONE', ( 35.87653273866171600, -30.70900650439002200, 25.85332840447847900 ) ) ; +#1104 = CARTESIAN_POINT ( 'NONE', ( 11.23282013174376100, -12.20964902009836500, -25.10001760406835200 ) ) ; +#1105 = CARTESIAN_POINT ( 'NONE', ( 41.05066806681167400, -17.89998532294796600, -11.56436099650833400 ) ) ; +#1106 = ORIENTED_EDGE ( 'NONE', *, *, #4934, .T. ) ; +#1107 = CARTESIAN_POINT ( 'NONE', ( 4.999999999998807200, -29.42161177198215000, 21.65997587649226800 ) ) ; +#1108 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000001400, -94.74682992296695300, 18.71443453778785600 ) ) ; +#1109 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#1110 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 10.96446609406726200, -25.00000000000000000 ) ) ; +#1111 = CARTESIAN_POINT ( 'NONE', ( 33.59424268543293800, -17.07142213206403600, -25.06701809440278700 ) ) ; +#1112 = ADVANCED_FACE ( 'NONE', ( #8849 ), #6975, .T. ) ; +#1113 = CARTESIAN_POINT ( 'NONE', ( 6.722899050771118800, -30.36355862642289700, 24.01622948544863000 ) ) ; +#1114 = CARTESIAN_POINT ( 'NONE', ( 31.64558216214488700, -30.75492986104357800, 27.82500175052147300 ) ) ; +#1115 = CARTESIAN_POINT ( 'NONE', ( 0.09555219650721830100, -6.124644875707784500, 16.49126075446443100 ) ) ; +#1116 = CARTESIAN_POINT ( 'NONE', ( 11.73789163531347400, -30.45162656738435600, 27.26122422708946400 ) ) ; +#1117 = CARTESIAN_POINT ( 'NONE', ( 31.28872798744534800, -15.76716788914841600, 23.98309269886768300 ) ) ; +#1118 = EDGE_CURVE ( 'NONE', #8590, #11262, #8079, .T. ) ; +#1119 = MECHANICAL_CONTEXT ( 'NONE', #109, 'mechanical' ) ; +#1120 = EDGE_LOOP ( 'NONE', ( #8719, #11092, #1199, #3889 ) ) ; +#1121 = CARTESIAN_POINT ( 'NONE', ( 3.964952904803431500, -17.91110870659530000, -12.59331713627169300 ) ) ; +#1122 = CARTESIAN_POINT ( 'NONE', ( 39.34650860548168800, -28.83552093232821200, 20.56463820890619900 ) ) ; +#1123 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 6.938893903907222500E-016 ) ) ; +#1124 = CARTESIAN_POINT ( 'NONE', ( 6.852252797940347600, -12.59368269892296300, 21.43269334311145300 ) ) ; +#1125 = EDGE_CURVE ( 'NONE', #6805, #9677, #3406, .T. ) ; +#1126 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -19.99999999999988300, 8.005331014629282600 ) ) ; +#1127 = VECTOR ( 'NONE', #7814, 1000.000000000000000 ) ; +#1128 = CARTESIAN_POINT ( 'NONE', ( 10.34878736050632100, -30.47721684668731300, 26.62500235460494500 ) ) ; +#1129 = CARTESIAN_POINT ( 'NONE', ( 32.68167656173560000, -100.0000000000000300, 3.977574556406454900 ) ) ; +#1130 = ORIENTED_EDGE ( 'NONE', *, *, #1463, .T. ) ; +#1131 = CARTESIAN_POINT ( 'NONE', ( 40.55979508045040700, -11.76587147119672500, 19.22094601078181600 ) ) ; +#1132 = CARTESIAN_POINT ( 'NONE', ( 5.036644291899405900, -29.81162829737118600, 21.83297609445860100 ) ) ; +#1133 = CARTESIAN_POINT ( 'NONE', ( 3.949813413549676100, -17.89962682709924400, -11.53187062879840700 ) ) ; +#1134 = CARTESIAN_POINT ( 'NONE', ( 37.15347444564972100, -30.79760318278795200, 24.77620651414504500 ) ) ; +#1135 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4215, #229, #1231, #8356, #2234, #9372, #3247, #10382, #4259, #11405, #5286, #12379, #6326, #273, #7378, #1276 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( -2.013872661866555200E-005, 0.001257630305409291600, 0.001896514821423269400, 0.002535399337437246800, 0.003174283853451225000, 0.003813168369465202800, 0.004452052885479181000, 0.005090937401493158400 ), + .UNSPECIFIED. ) ; +#1136 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999998200, -27.11438205369298200, 6.909191562394151600 ) ) ; +#1137 = CARTESIAN_POINT ( 'NONE', ( 33.83893000664920000, -31.07174046245265600, 26.84699560290830100 ) ) ; +#1138 = CARTESIAN_POINT ( 'NONE', ( 35.85505782100921100, -26.51075822232227000, 17.49344818127742900 ) ) ; +#1139 = CIRCLE ( 'NONE', #10227, 2.499999999999998700 ) ; +#1140 = CARTESIAN_POINT ( 'NONE', ( 8.628082721026530100, -29.92814128656377500, 25.55222990435631300 ) ) ; +#1141 = CARTESIAN_POINT ( 'NONE', ( 41.32231271144200200, -7.755134716725905300, -25.11020462403648800 ) ) ; +#1142 = CARTESIAN_POINT ( 'NONE', ( -8.382065499967732200E-013, -9.596783553330803700, 10.98181282031942500 ) ) ; +#1143 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999079800, -9.472314291993505700, -14.86900167892827800 ) ) ; +#1144 = CARTESIAN_POINT ( 'NONE', ( 27.70377504235204900, -31.18104598916620100, 28.61116263897639900 ) ) ; +#1145 = EDGE_CURVE ( 'NONE', #5786, #10763, #6448, .T. ) ; +#1146 = CARTESIAN_POINT ( 'NONE', ( 38.34525246396292900, -30.80888493951520200, 23.09696887768464500 ) ) ; +#1147 = CARTESIAN_POINT ( 'NONE', ( 13.17149531358194300, -20.25874749835673300, 21.55085345908641900 ) ) ; +#1148 = FACE_OUTER_BOUND ( 'NONE', #8876, .T. ) ; +#1149 = CARTESIAN_POINT ( 'NONE', ( 35.66422807680083900, -29.72415663453285000, 25.90444833306800000 ) ) ; +#1150 = CARTESIAN_POINT ( 'NONE', ( 12.20554544332156000, -10.38999931282906000, -25.05503821112449000 ) ) ; +#1151 = EDGE_LOOP ( 'NONE', ( #7417, #7443, #7480, #7484, #7577, #7614 ) ) ; +#1152 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1153 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -95.07596123493894400, 16.93034213569669800 ) ) ; +#1154 = CARTESIAN_POINT ( 'NONE', ( 44.35039290416551000, -9.999999999999998200, -16.66595216622816300 ) ) ; +#1155 = CARTESIAN_POINT ( 'NONE', ( 34.46806036390041300, -18.99866489057648900, -24.34954972384719300 ) ) ; +#1156 = CARTESIAN_POINT ( 'NONE', ( 7.061413914048544300, -29.30436808982030100, 23.93321086958098600 ) ) ; +#1157 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999996400, 51.02052347080197600, 26.62899292861737500 ) ) ; +#1158 = CARTESIAN_POINT ( 'NONE', ( 31.64470402841471100, -30.81743593261262900, 27.81493315617093700 ) ) ; +#1159 = CARTESIAN_POINT ( 'NONE', ( 35.37145322550531300, -9.707448400995916800, 25.00000000000000000 ) ) ; +#1160 = CARTESIAN_POINT ( 'NONE', ( 11.83691461048931300, -30.94155738920488500, 27.21894857894811500 ) ) ; +#1161 = CARTESIAN_POINT ( 'NONE', ( 28.48963005451940600, -18.04515700485408700, 23.58142175600858400 ) ) ; +#1162 = CARTESIAN_POINT ( 'NONE', ( 38.95275069155125200, -30.54958874895016100, 21.46147354584651600 ) ) ; +#1163 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#1164 = CARTESIAN_POINT ( 'NONE', ( 13.90110603995632100, -27.25264590179476100, 20.68912723575974200 ) ) ; +#1165 = CARTESIAN_POINT ( 'NONE', ( 39.58739755751953000, -28.75538133191317400, 19.32568846118225300 ) ) ; +#1166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669240300, 0.9848077530122092400 ) ) ; +#1167 = CARTESIAN_POINT ( 'NONE', ( 0.9084284741217723000, -8.452784834690811900, 16.38149653183796100 ) ) ; +#1168 = CARTESIAN_POINT ( 'NONE', ( 17.03867488856406000, -30.65936817455452300, 28.70849270624885800 ) ) ; +#1169 = CARTESIAN_POINT ( 'NONE', ( 10.59129744164254700, -31.11532224035882900, 26.51916633347417800 ) ) ; +#1170 = LINE ( 'NONE', #10140, #6562 ) ; +#1171 = CARTESIAN_POINT ( 'NONE', ( 26.65800171406234800, -12.50000000000001100, 21.97513490546043300 ) ) ; +#1172 = CARTESIAN_POINT ( 'NONE', ( 38.82988373954118800, -10.00981243762536500, -24.69949892815903800 ) ) ; +#1173 = CARTESIAN_POINT ( 'NONE', ( 39.33826338712354700, -10.28889580668738000, 21.98457917862444000 ) ) ; +#1174 = CARTESIAN_POINT ( 'NONE', ( 6.100394288899615000, -28.89960507202462000, 22.00167280378118000 ) ) ; +#1175 = CARTESIAN_POINT ( 'NONE', ( 44.29633566339633400, -9.564740884178595700, -17.72909115837713000 ) ) ; +#1176 = CARTESIAN_POINT ( 'NONE', ( 36.68060936838362100, -29.51852071055178700, 25.12843119967856600 ) ) ; +#1177 = CARTESIAN_POINT ( 'NONE', ( 38.92420708895958400, -30.56058678584843200, 21.45953493765681200 ) ) ; +#1178 = CARTESIAN_POINT ( 'NONE', ( 33.76767176086681800, -30.59902790670102500, 27.03689820670024000 ) ) ; +#1179 = CARTESIAN_POINT ( 'NONE', ( 39.78271871967732000, -28.56884109773487200, 17.40305655534503500 ) ) ; +#1180 = FACE_OUTER_BOUND ( 'NONE', #2016, .T. ) ; +#1181 = DIRECTION ( 'NONE', ( 0.2102631003868357700, 0.0000000000000000000, -0.9776448376663763300 ) ) ; +#1182 = CARTESIAN_POINT ( 'NONE', ( 8.810123363931117200, -31.11612910505442300, 25.27764839544031300 ) ) ; +#1183 = CARTESIAN_POINT ( 'NONE', ( 12.89296446369655100, -95.07596123493894400, 8.224698702697049100 ) ) ; +#1184 = CARTESIAN_POINT ( 'NONE', ( 44.85781939446116700, -10.00000000000000000, -14.32311909225988000 ) ) ; +#1185 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, -7.272792330106477200, 13.03997438371956900 ) ) ; +#1186 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999999300, -6.894013195288897200, -17.08656994447624600 ) ) ; +#1187 = CARTESIAN_POINT ( 'NONE', ( 38.28820478817986100, -29.41398984147169300, 23.71878246848767100 ) ) ; +#1188 = FACE_OUTER_BOUND ( 'NONE', #3869, .T. ) ; +#1189 = CARTESIAN_POINT ( 'NONE', ( 35.80294630942089600, -30.51243909582757800, 25.97598806757021400 ) ) ; +#1190 = CARTESIAN_POINT ( 'NONE', ( 10.14743686321006800, -19.73311676856305400, -23.92476964513821600 ) ) ; +#1191 = DIRECTION ( 'NONE', ( 0.9770050802324391500, 0.03617104466853510900, 0.2101255070846753100 ) ) ; +#1192 = CARTESIAN_POINT ( 'NONE', ( 34.96779545965575400, -20.32149963875696100, -23.67186603788613300 ) ) ; +#1193 = CARTESIAN_POINT ( 'NONE', ( 7.007610634050760900, -30.75518325333138500, 23.87299996977060000 ) ) ; +#1194 = PLANE ( 'NONE', #7122 ) ; +#1195 = CARTESIAN_POINT ( 'NONE', ( 31.44022210456261800, -30.78696413984847500, 27.88358627857188700 ) ) ; +#1196 = CARTESIAN_POINT ( 'NONE', ( 23.28653487454236200, -27.93250714223468700, 27.46301515907685700 ) ) ; +#1197 = CARTESIAN_POINT ( 'NONE', ( 11.82998185257165400, -30.61257334903385200, 27.29334975016793400 ) ) ; +#1198 = ORIENTED_EDGE ( 'NONE', *, *, #11371, .F. ) ; +#1199 = ORIENTED_EDGE ( 'NONE', *, *, #12704, .T. ) ; +#1200 = CARTESIAN_POINT ( 'NONE', ( 19.16691426563567200, -12.49999999999998400, -22.94081745177112100 ) ) ; +#1201 = CARTESIAN_POINT ( 'NONE', ( 39.77747743359813600, -29.32121435875093200, 21.74644572930449700 ) ) ; +#1202 = VECTOR ( 'NONE', #1583, 1000.000000000000000 ) ; +#1203 = CARTESIAN_POINT ( 'NONE', ( 10.71227055634387400, -28.74794513004117000, 26.84955217698801300 ) ) ; +#1204 = CARTESIAN_POINT ( 'NONE', ( 39.66588764281856800, -28.70054551391712400, 18.69376205319551000 ) ) ; +#1205 = CARTESIAN_POINT ( 'NONE', ( 44.32482347122083900, -10.16426945614325000, 12.90147180912801200 ) ) ; +#1206 = CARTESIAN_POINT ( 'NONE', ( 11.35228933868426200, -13.41914980536907200, -25.15601430610437800 ) ) ; +#1207 = CARTESIAN_POINT ( 'NONE', ( 19.08155073222361500, -95.07596123493894400, 9.998812624560816400 ) ) ; +#1208 = CARTESIAN_POINT ( 'NONE', ( 19.89693543307430800, -19.87568216611874300, 23.25829123793062100 ) ) ; +#1209 = CARTESIAN_POINT ( 'NONE', ( 10.54175166171323000, -30.63131812127962700, 26.70225741656502200 ) ) ; +#1210 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, -20.68999999999999400 ) ) ; +#1211 = CARTESIAN_POINT ( 'NONE', ( 0.9905875069821983300, -7.998837704780860300, -20.53757729045571900 ) ) ; +#1212 = CARTESIAN_POINT ( 'NONE', ( 39.51108163073096300, -9.977733264505426200, 26.51917390128917900 ) ) ; +#1213 = ORIENTED_EDGE ( 'NONE', *, *, #6894, .F. ) ; +#1214 = CARTESIAN_POINT ( 'NONE', ( 5.281684958730991800, -30.16946772952559300, 21.82453969799290400 ) ) ; +#1215 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1216 = CARTESIAN_POINT ( 'NONE', ( 36.89662208671112600, -30.50266986981038300, 25.21630006630439500 ) ) ; +#1217 = ORIENTED_EDGE ( 'NONE', *, *, #13036, .T. ) ; +#1218 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -5.000000000000000900, 22.50000000000000400 ) ) ; +#1219 = CARTESIAN_POINT ( 'NONE', ( 28.04705385408469800, -19.14984591900812200, 23.06958931090675000 ) ) ; +#1220 = EDGE_CURVE ( 'NONE', #3592, #569, #4681, .T. ) ; +#1221 = CARTESIAN_POINT ( 'NONE', ( 33.74593061823504300, -31.03574828944510600, 26.91144499014654200 ) ) ; +#1222 = CARTESIAN_POINT ( 'NONE', ( 39.94091253140345500, -26.01457706527145700, 8.508400210255549800 ) ) ; +#1223 = CARTESIAN_POINT ( 'NONE', ( 3.947788975774799300, -17.90107426230283800, -11.66296443795100900 ) ) ; +#1224 = CARTESIAN_POINT ( 'NONE', ( 15.95387821613834100, -30.34822880135640200, 25.95597450183370800 ) ) ; +#1225 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1226 = ORIENTED_EDGE ( 'NONE', *, *, #9561, .T. ) ; +#1227 = ORIENTED_EDGE ( 'NONE', *, *, #11890, .T. ) ; +#1228 = CARTESIAN_POINT ( 'NONE', ( 8.656050541155501300, -30.27974732938720200, 25.63850381728772400 ) ) ; +#1229 = CARTESIAN_POINT ( 'NONE', ( 26.18234280836300000, -9.999999999999996400, -31.85286835589118900 ) ) ; +#1230 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1231 = CARTESIAN_POINT ( 'NONE', ( 6.086913408708666000, -8.046335116142216700, -24.99479927947083300 ) ) ; +#1232 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10944, #10927, #9720, #9706, #9664, #9634 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.009839201723012107300, 0.01303669945511052800, 0.01623419718720894900 ), + .UNSPECIFIED. ) ; +#1233 = VERTEX_POINT ( 'NONE', #12733 ) ; +#1234 = CARTESIAN_POINT ( 'NONE', ( 38.44237067896157400, -30.51094805786220100, 23.61255766156979200 ) ) ; +#1235 = ORIENTED_EDGE ( 'NONE', *, *, #11642, .T. ) ; +#1236 = CARTESIAN_POINT ( 'NONE', ( 35.66387011790426000, -31.16798935389709500, 25.64932602714290900 ) ) ; +#1237 = CARTESIAN_POINT ( 'NONE', ( 14.06458493523713200, -97.50042270749531800, 21.44461698310065500 ) ) ; +#1238 = VERTEX_POINT ( 'NONE', #788 ) ; +#1239 = CARTESIAN_POINT ( 'NONE', ( 30.92344041721546000, -94.71799171670544100, 18.05781399321781300 ) ) ; +#1240 = CARTESIAN_POINT ( 'NONE', ( 43.00000000000000000, -5.000000000000000900, -23.00000000000000000 ) ) ; +#1241 = CARTESIAN_POINT ( 'NONE', ( 26.73731198294288400, -32.08003161131645700, 21.03753419047550500 ) ) ; +#1242 = CARTESIAN_POINT ( 'NONE', ( 6.879286077172492000, -29.73739684076490500, 24.16187420227274200 ) ) ; +#1243 = CARTESIAN_POINT ( 'NONE', ( 6.044837415166033300, -10.23626564843718800, -24.61394692711399700 ) ) ; +#1244 = ORIENTED_EDGE ( 'NONE', *, *, #1320, .T. ) ; +#1245 = CARTESIAN_POINT ( 'NONE', ( 31.43939742300369400, -30.81496661601694200, 27.87908770999884200 ) ) ; +#1246 = CARTESIAN_POINT ( 'NONE', ( 43.86489374814021100, -8.180206483010357100, -21.81759092816330200 ) ) ; +#1247 = CARTESIAN_POINT ( 'NONE', ( 12.13858864131816300, -30.98105945485108100, 27.33247491039256600 ) ) ; +#1248 = CARTESIAN_POINT ( 'NONE', ( 44.98225441818446800, -5.486409015390951700, -19.73857565885921500 ) ) ; +#1249 = CARTESIAN_POINT ( 'NONE', ( 39.21407606921705700, -30.45233536873254100, 21.54663750045049000 ) ) ; +#1250 = VERTEX_POINT ( 'NONE', #12573 ) ; +#1251 = EDGE_LOOP ( 'NONE', ( #6180, #6269, #6338, #6443 ) ) ; +#1252 = CARTESIAN_POINT ( 'NONE', ( 14.38312843017368400, -20.15316442967188200, 22.10864104137280600 ) ) ; +#1253 = CARTESIAN_POINT ( 'NONE', ( 39.78324499324015300, -28.57367335202717500, 17.43650536225947800 ) ) ; +#1254 = EDGE_LOOP ( 'NONE', ( #3856, #4047, #4198, #4233 ) ) ; +#1255 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.35825960981895800, 15.16559051180124700 ) ) ; +#1256 = CARTESIAN_POINT ( 'NONE', ( 10.59116300531108100, -30.07083012401557200, 26.70360992158272100 ) ) ; +#1257 = CARTESIAN_POINT ( 'NONE', ( 25.05762127725338600, -27.96664356551895400, 27.45669629599069600 ) ) ; +#1258 = CARTESIAN_POINT ( 'NONE', ( 0.1426144731285050600, -6.210819749581374600, -20.29459966141522300 ) ) ; +#1259 = CARTESIAN_POINT ( 'NONE', ( 5.846610598209743200, -29.01927975508861800, 22.03209616075366000 ) ) ; +#1260 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, 9.500000000000000000, 0.0000000000000000000 ) ) ; +#1261 = CARTESIAN_POINT ( 'NONE', ( 36.49232866075152500, -29.49682503820456600, 25.24455524248101000 ) ) ; +#1262 = ORIENTED_EDGE ( 'NONE', *, *, #11999, .T. ) ; +#1263 = CARTESIAN_POINT ( 'NONE', ( 12.34628625564431000, -100.0000000000000100, 3.973589276607469000 ) ) ; +#1264 = ORIENTED_EDGE ( 'NONE', *, *, #6140, .F. ) ; +#1265 = CARTESIAN_POINT ( 'NONE', ( 31.62503361200067100, -19.22093246284174100, 21.81021419785770000 ) ) ; +#1266 = ORIENTED_EDGE ( 'NONE', *, *, #6615, .F. ) ; +#1267 = CARTESIAN_POINT ( 'NONE', ( 33.56303725949351200, -30.46746393495244100, 27.13496214099596700 ) ) ; +#1268 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3939, #922, #11087 ), + ( #4969, #12077, #6004 ), + ( #13028, #7062, #969 ), + ( #8089, #1966, #9104 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( -3.616898447411642800E-015, 0.0001256340864440271900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7941643989882855000, 1.000000000000000000), + ( 1.000000000000000000, 0.7941643989240009200, 1.000000000000000000), + ( 1.000000000000000000, 0.7941588266965212700, 1.000000000000000000), + ( 1.000000000000000000, 0.7941476793044250900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1269 = CARTESIAN_POINT ( 'NONE', ( 3.979756332933785500, -17.91392871610906600, -12.85824954778942300 ) ) ; +#1270 = CARTESIAN_POINT ( 'NONE', ( 12.13385600943975500, -30.56784451511677900, 27.41773238752107400 ) ) ; +#1271 = CARTESIAN_POINT ( 'NONE', ( 8.997781311714996700, -31.16893503770342700, 25.37680194361914600 ) ) ; +#1272 = EDGE_CURVE ( 'NONE', #5939, #8256, #8545, .T. ) ; +#1273 = CARTESIAN_POINT ( 'NONE', ( 33.59572391983773100, -20.71403959325701300, -24.18404770231903100 ) ) ; +#1274 = CARTESIAN_POINT ( 'NONE', ( 2.602085213965210600E-015, -8.819808196659240100, -11.57292770299566500 ) ) ; +#1275 = CARTESIAN_POINT ( 'NONE', ( 38.11620010138260300, -8.413650791147723900, 25.00000000000000000 ) ) ; +#1276 = CARTESIAN_POINT ( 'NONE', ( 2.501097020554920100, -9.240536455385907300, -23.55289141356945500 ) ) ; +#1277 = CARTESIAN_POINT ( 'NONE', ( 37.97388170580194400, -29.15162129725787200, 23.70597382003640500 ) ) ; +#1278 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -5.000000000000000900, 8.005331014629273800 ) ) ; +#1279 = FACE_OUTER_BOUND ( 'NONE', #11228, .T. ) ; +#1280 = EDGE_LOOP ( 'NONE', ( #5834, #6177, #6494 ) ) ; +#1281 = CARTESIAN_POINT ( 'NONE', ( 35.60988050028088700, -30.35561355811025300, 26.11025674342292600 ) ) ; +#1282 = CARTESIAN_POINT ( 'NONE', ( 33.65942717036091400, -95.07596123493894400, 15.11799739622483900 ) ) ; +#1283 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000001800, 9.500000000000000000, -24.99999999999999600 ) ) ; +#1284 = CARTESIAN_POINT ( 'NONE', ( 30.06951062889591600, -38.97427732929426700, 18.99721454164301100 ) ) ; +#1285 = CARTESIAN_POINT ( 'NONE', ( 7.314222304603765300, -31.00873037404926100, 23.74850097045163400 ) ) ; +#1286 = CARTESIAN_POINT ( 'NONE', ( 31.44021989191638500, -30.84515780510085400, 27.87332639906595600 ) ) ; +#1287 = CARTESIAN_POINT ( 'NONE', ( 19.94205019309342600, -33.35025653084936400, 26.50741664928542800 ) ) ; +#1288 = FACE_OUTER_BOUND ( 'NONE', #5044, .T. ) ; +#1289 = CARTESIAN_POINT ( 'NONE', ( 39.20181909027353800, -28.99962902830919400, 21.86568914400942300 ) ) ; +#1290 = EDGE_LOOP ( 'NONE', ( #1550, #817, #5708, #853 ) ) ; +#1291 = CARTESIAN_POINT ( 'NONE', ( 15.01458996110419300, -27.27891878870541800, 21.10955026380510800 ) ) ; +#1292 = CARTESIAN_POINT ( 'NONE', ( 39.82234928795446600, -28.50159185432166400, 16.80769383955893700 ) ) ; +#1293 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #838, #949, #753, #627 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9599737919958504200, 0.9599737919958504200, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#1294 = CARTESIAN_POINT ( 'NONE', ( 25.03435590731576700, -19.87368981056677700, 23.25900208725089200 ) ) ; +#1295 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8588, #7562, #9594, #3467, #10599, #4474 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( -3.495470191392054600E-005, 0.001779711958418566500, 0.003594378618751053500 ), + .UNSPECIFIED. ) ; +#1296 = CARTESIAN_POINT ( 'NONE', ( 19.94237873759180200, -27.96664356504567900, 27.45669629622856800 ) ) ; +#1297 = EDGE_CURVE ( 'NONE', #1873, #2631, #2907, .T. ) ; +#1298 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000031100, -29.99960939767363000, 21.55805930029743700 ) ) ; +#1299 = CARTESIAN_POINT ( 'NONE', ( 0.8450799996950028000, -8.389711229384591500, -19.69998625431980000 ) ) ; +#1300 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, -5.000000000000032000, -19.35342349036130100 ) ) ; +#1301 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -95.07596123493894400, 15.95758058754439400 ) ) ; +#1302 = FACE_OUTER_BOUND ( 'NONE', #4358, .T. ) ; +#1303 = CARTESIAN_POINT ( 'NONE', ( 5.905104070653084000, -30.54106849631865800, 21.92736806470612300 ) ) ; +#1304 = CARTESIAN_POINT ( 'NONE', ( 34.96779545965576100, -20.32149963875679400, -23.67186603788615800 ) ) ; +#1305 = AXIS2_PLACEMENT_3D ( 'NONE', #5808, #12850, #6856 ) ; +#1306 = CARTESIAN_POINT ( 'NONE', ( 36.71790817807090700, -30.30036392420226200, 25.38951518050432200 ) ) ; +#1307 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999999100, -100.0000000000000100, -5.268163163413119000 ) ) ; +#1308 = CARTESIAN_POINT ( 'NONE', ( 35.25044129938294200, -19.36544397261941300, 19.24910087464601500 ) ) ; +#1309 = CARTESIAN_POINT ( 'NONE', ( 33.56303815817138800, -30.88936775573244000, 27.06057198444649700 ) ) ; +#1310 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -96.23084026935335100, 5.350798983772016900 ) ) ; +#1311 = CARTESIAN_POINT ( 'NONE', ( 12.33284177030521200, -28.70988943834701600, 27.66501807986543700 ) ) ; +#1312 = CARTESIAN_POINT ( 'NONE', ( 44.15492000030497600, -8.389711229384598600, -19.69998625431987800 ) ) ; +#1313 = CARTESIAN_POINT ( 'NONE', ( 12.33664453285907700, -30.92636103126402200, 27.43025125128403000 ) ) ; +#1314 = FACE_OUTER_BOUND ( 'NONE', #388, .T. ) ; +#1315 = CARTESIAN_POINT ( 'NONE', ( 8.833057371934002000, -30.50605060449484900, 25.73049372296349800 ) ) ; +#1316 = EDGE_CURVE ( 'NONE', #11245, #6649, #736, .T. ) ; +#1317 = CARTESIAN_POINT ( 'NONE', ( 3.120086095901691000E-013, -9.993902395231888400, -11.90009552318386300 ) ) ; +#1318 = CARTESIAN_POINT ( 'NONE', ( 35.13238777997517600, -11.12856564954830300, 25.00000000000000400 ) ) ; +#1319 = CARTESIAN_POINT ( 'NONE', ( 24.85960558233109600, -33.35446909076586800, 26.50697697917620500 ) ) ; +#1320 = EDGE_CURVE ( 'NONE', #3107, #9827, #10018, .T. ) ; +#1321 = ORIENTED_EDGE ( 'NONE', *, *, #12168, .T. ) ; +#1322 = CARTESIAN_POINT ( 'NONE', ( 38.48055593878000000, -30.20443344658011900, 23.85327641688498400 ) ) ; +#1323 = CARTESIAN_POINT ( 'NONE', ( 4.992497069697877900, -95.07596123493897300, -4.496020763364928300 ) ) ; +#1324 = CIRCLE ( 'NONE', #3272, 3.189999999999995100 ) ; +#1325 = CARTESIAN_POINT ( 'NONE', ( 35.52458179455265300, -31.05886442795752700, 25.85340418287458800 ) ) ; +#1326 = CARTESIAN_POINT ( 'NONE', ( 7.989292489312970400, -31.43467063061702000, 22.93440393206230600 ) ) ; +#1327 = CARTESIAN_POINT ( 'NONE', ( 38.12750192259987600, -95.07596123493893000, 13.66531623102924400 ) ) ; +#1328 = CARTESIAN_POINT ( 'NONE', ( 35.58452473895134500, -32.06305842516798800, 25.36675889729792700 ) ) ; +#1329 = CARTESIAN_POINT ( 'NONE', ( 6.877671634425659900, -30.09186609070688000, 24.29363184722896900 ) ) ; +#1330 = CARTESIAN_POINT ( 'NONE', ( 39.99515794527692200, -22.32710123067945000, -11.55511720291617600 ) ) ; +#1331 = CARTESIAN_POINT ( 'NONE', ( 31.33678554803363900, -30.81685988382798100, 27.90960423273126500 ) ) ; +#1332 = CARTESIAN_POINT ( 'NONE', ( 13.36523482762102300, -30.77559965646167600, 27.83663713985233900 ) ) ; +#1333 = TOROIDAL_SURFACE ( 'NONE', #4511, 2.500000000000000000, 2.500000000000000000 ) ; +#1334 = CARTESIAN_POINT ( 'NONE', ( 39.76757548724384600, -30.13634671048106700, 21.66583481369993100 ) ) ; +#1335 = CARTESIAN_POINT ( 'NONE', ( 14.79739752784633600, -20.12133394300306900, 22.27701783342871900 ) ) ; +#1336 = CARTESIAN_POINT ( 'NONE', ( 39.88339101057604100, -28.34770938389136000, 15.55016074841211300 ) ) ; +#1337 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -5.000000000000000900, 0.0000000000000000000 ) ) ; +#1338 = CARTESIAN_POINT ( 'NONE', ( 18.78981210128373300, -97.51638472417892000, 22.06850011906570300 ) ) ; +#1339 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #11049, #4894, #4937 ), + ( #12043, #5967, #12998 ), + ( #7027, #933, #8050 ), + ( #1934, #9073, #2947 ), + ( #10072, #3950, #11097 ), + ( #4980, #12086, #6013 ), + ( #13038, #7069, #978 ), + ( #8098, #1978, #9114 ), + ( #2993, #10118, #3991 ), + ( #11142, #5029, #12126 ), + ( #6059, #5, #7112 ), + ( #1016, #8142, #2022 ), + ( #9155, #3038, #10168 ), + ( #4035, #11185, #5073 ), + ( #12173, #6102, #50 ), + ( #7159, #1060, #8183 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -1.734723475976807100E-018, 0.002226100544389916300, 0.004452201088779834400, 0.005565251360974793700, 0.006678301633169752100, 0.008904402177559670600, 0.01335660326633950600, 0.01780880435511934100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7244825415842359700, 1.000000000000000000), + ( 1.000000000000000000, 0.7419772105791349000, 1.000000000000000000), + ( 1.000000000000000000, 0.7769715623865101100, 1.000000000000000000), + ( 1.000000000000000000, 0.7944760416275366000, 1.000000000000000000), + ( 1.000000000000000000, 0.8203989626032741600, 1.000000000000000000), + ( 1.000000000000000000, 0.8289841048678285900, 1.000000000000000000), + ( 1.000000000000000000, 0.8457553974924578700, 1.000000000000000000), + ( 1.000000000000000000, 0.8539697634094457500, 1.000000000000000000), + ( 1.000000000000000000, 0.8780002341413384300, 1.000000000000000000), + ( 1.000000000000000000, 0.8932073966716024300, 1.000000000000000000), + ( 1.000000000000000000, 0.9354213354543787800, 1.000000000000000000), + ( 1.000000000000000000, 0.9589939734610932700, 1.000000000000000000), + ( 1.000000000000000000, 0.9913592356952183300, 1.000000000000000000), + ( 1.000000000000000000, 1.000064721039448400, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1340 = CARTESIAN_POINT ( 'NONE', ( 7.579484036836335600, -100.0000000000000100, -27.29038152329701800 ) ) ; +#1341 = CARTESIAN_POINT ( 'NONE', ( 36.11325832698724300, -94.72616509782155000, 15.98040649258837200 ) ) ; +#1342 = CARTESIAN_POINT ( 'NONE', ( 0.2963766246385212700, -6.714915220894887700, 17.31763087480941000 ) ) ; +#1343 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -6.938893903907222500E-016 ) ) ; +#1344 = CARTESIAN_POINT ( 'NONE', ( 5.347829962838281900, -29.37618589780977300, 22.11729189305095700 ) ) ; +#1345 = FACE_BOUND ( 'NONE', #3420, .T. ) ; +#1346 = CARTESIAN_POINT ( 'NONE', ( 34.27193394175949900, -20.64364982819585100, -24.20492632925299900 ) ) ; +#1347 = CARTESIAN_POINT ( 'NONE', ( 20.14039537637302500, -27.96255689439421800, 27.45771657700752800 ) ) ; +#1348 = CARTESIAN_POINT ( 'NONE', ( 36.50236537477772500, -31.13614937858121200, 24.96851318956578700 ) ) ; +#1349 = CARTESIAN_POINT ( 'NONE', ( 37.32930790197003300, -95.04909728596216200, 13.78811984543643000 ) ) ; +#1350 = CARTESIAN_POINT ( 'NONE', ( 37.50402177868834700, -19.52041506241283000, 16.50322040264164500 ) ) ; +#1351 = EDGE_CURVE ( 'NONE', #1847, #5206, #12097, .T. ) ; +#1352 = CARTESIAN_POINT ( 'NONE', ( 33.45426198730388700, -30.35157663744317700, 27.17720104088652300 ) ) ; +#1353 = CARTESIAN_POINT ( 'NONE', ( -1.497758529532666100, -12.60125871759970600, -23.00000000000000000 ) ) ; +#1354 = CARTESIAN_POINT ( 'NONE', ( 15.39529859414195400, -27.28474993656719500, 21.23686369780869000 ) ) ; +#1355 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000001400, -94.96381121975215900, 18.14636354334062000 ) ) ; +#1356 = CARTESIAN_POINT ( 'NONE', ( 20.00735423513291500, -27.96523496585093200, 27.45710953202296500 ) ) ; +#1357 = CARTESIAN_POINT ( 'NONE', ( 12.33309125287245700, -30.70070162075117500, 27.48103115286210900 ) ) ; +#1358 = CARTESIAN_POINT ( 'NONE', ( 8.990008809407820300, -29.65119874768531700, 25.65562468939881700 ) ) ; +#1359 = VECTOR ( 'NONE', #7039, 1000.000000000000000 ) ; +#1360 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1361 = CARTESIAN_POINT ( 'NONE', ( 34.36644757648732500, -12.50145519379120900, 24.44012343764058000 ) ) ; +#1362 = CARTESIAN_POINT ( 'NONE', ( 23.29892261115560700, -25.49316313803687400, 22.26813732224104200 ) ) ; +#1363 = CARTESIAN_POINT ( 'NONE', ( 37.95286527546424800, -30.97031654456177600, 23.37097538493259200 ) ) ; +#1364 = ORIENTED_EDGE ( 'NONE', *, *, #4761, .F. ) ; +#1365 = CARTESIAN_POINT ( 'NONE', ( 35.46821335924318000, -30.05913346989455100, 26.14435135344615100 ) ) ; +#1366 = ORIENTED_EDGE ( 'NONE', *, *, #13032, .F. ) ; +#1367 = CARTESIAN_POINT ( 'NONE', ( 27.22033945165696900, -95.07596123493895800, 16.84439144973487900 ) ) ; +#1368 = LINE ( 'NONE', #315, #11835 ) ; +#1369 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000000, -17.49999999999999600 ) ) ; +#1370 = CARTESIAN_POINT ( 'NONE', ( 33.64771066131344700, -13.41914980538562000, -25.15601430610515600 ) ) ; +#1371 = CARTESIAN_POINT ( 'NONE', ( 7.579484036836335600, -12.49999999999998400, -11.86177071130691600 ) ) ; +#1372 = CARTESIAN_POINT ( 'NONE', ( 34.32545278422351500, -31.36362213524511200, 18.01299502310314400 ) ) ; +#1373 = CARTESIAN_POINT ( 'NONE', ( 7.333123363588391000, -29.19814600480968600, 24.05114457695656300 ) ) ; +#1374 = CARTESIAN_POINT ( 'NONE', ( 40.00028065183003900, -19.97806919814924600, -11.18084591580779700 ) ) ; +#1375 = CARTESIAN_POINT ( 'NONE', ( 31.33700996141737600, -30.83260001072352100, 27.90676345863435200 ) ) ; +#1376 = CARTESIAN_POINT ( 'NONE', ( 7.603654636367264400, -31.44078814996223800, 24.97476238694616800 ) ) ; +#1377 = EDGE_CURVE ( 'NONE', #9677, #3780, #6591, .T. ) ; +#1378 = AXIS2_PLACEMENT_3D ( 'NONE', #7793, #1678, #8816 ) ; +#1379 = CARTESIAN_POINT ( 'NONE', ( 38.89940073037056600, -28.89958739739261200, 22.00204665813262400 ) ) ; +#1380 = ORIENTED_EDGE ( 'NONE', *, *, #12527, .T. ) ; +#1381 = AXIS2_PLACEMENT_3D ( 'NONE', #3468, #12586, #10602 ) ; +#1382 = CARTESIAN_POINT ( 'NONE', ( 12.89455389480868400, -28.69763028592165100, 27.91132602684001200 ) ) ; +#1383 = ORIENTED_EDGE ( 'NONE', *, *, #12993, .T. ) ; +#1384 = CARTESIAN_POINT ( 'NONE', ( 12.76326242653432400, -94.73833097814196000, 17.59060894189574500 ) ) ; +#1385 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #511, #451, #280, #266, #236, #222 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.0005167237232855461100, 0.001033447446571092200 ), + .UNSPECIFIED. ) ; +#1386 = CARTESIAN_POINT ( 'NONE', ( 27.19252257439250500, -19.32399500259506600, -26.64407188694833900 ) ) ; +#1387 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000001400, -99.99999999999998600, -34.56037615019668900 ) ) ; +#1388 = CARTESIAN_POINT ( 'NONE', ( 11.47522839335919000, -13.25042423942511700, 24.42686250784058900 ) ) ; +#1389 = CARTESIAN_POINT ( 'NONE', ( 6.215323077178915400, -30.68336751791600700, 22.01600870117145800 ) ) ; +#1390 = CARTESIAN_POINT ( 'NONE', ( 6.169269899305168000, -10.01163325784065900, -24.69895459425486500 ) ) ; +#1391 = CARTESIAN_POINT ( 'NONE', ( 20.05170006834911700, -27.96429671943141000, 27.45736486687246000 ) ) ; +#1392 = CARTESIAN_POINT ( 'NONE', ( 36.40373592168565200, -30.06311374020511800, 25.57174597046188300 ) ) ; +#1393 = ORIENTED_EDGE ( 'NONE', *, *, #10044, .T. ) ; +#1394 = ORIENTED_EDGE ( 'NONE', *, *, #12421, .F. ) ; +#1395 = CARTESIAN_POINT ( 'NONE', ( 38.89476193571867700, -19.67289108106312400, 13.80146525326486900 ) ) ; +#1396 = EDGE_CURVE ( 'NONE', #10310, #9510, #1048, .T. ) ; +#1397 = CARTESIAN_POINT ( 'NONE', ( 33.47043069347044800, -30.74633938384556200, 27.14467917374235400 ) ) ; +#1398 = ORIENTED_EDGE ( 'NONE', *, *, #7668, .T. ) ; +#1399 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1400 = CARTESIAN_POINT ( 'NONE', ( 15.64325362620656200, -20.06323573008557300, 22.57599842845151600 ) ) ; +#1401 = ORIENTED_EDGE ( 'NONE', *, *, #12299, .F. ) ; +#1402 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -90.07596123493894400, 10.95758058754439400 ) ) ; +#1403 = CARTESIAN_POINT ( 'NONE', ( 12.74083340842199700, -30.92240372302496000, 27.58362432388458200 ) ) ; +#1404 = ORIENTED_EDGE ( 'NONE', *, *, #3162, .T. ) ; +#1405 = CARTESIAN_POINT ( 'NONE', ( 8.952521534966727800, -30.75445950002104600, 25.70631603206548000 ) ) ; +#1406 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -3.469446951953615200E-016 ) ) ; +#1407 = ORIENTED_EDGE ( 'NONE', *, *, #5536, .F. ) ; +#1408 = CARTESIAN_POINT ( 'NONE', ( 20.01559366487761000, -25.57199624004481100, 22.25470527021052500 ) ) ; +#1409 = EDGE_LOOP ( 'NONE', ( #5537, #1427, #6461, #5825 ) ) ; +#1410 = CARTESIAN_POINT ( 'NONE', ( 38.28856612195301800, -29.96421717422667900, 24.09627219664074700 ) ) ; +#1411 = AXIS2_PLACEMENT_3D ( 'NONE', #7051, #959, #8078 ) ; +#1412 = CARTESIAN_POINT ( 'NONE', ( 35.49938941628875700, -30.77994082014448200, 26.06659381226195600 ) ) ; +#1413 = CARTESIAN_POINT ( 'NONE', ( 37.49999998962729100, -95.07596123493894400, 12.92969265702213700 ) ) ; +#1414 = ORIENTED_EDGE ( 'NONE', *, *, #9125, .T. ) ; +#1415 = VERTEX_POINT ( 'NONE', #11828 ) ; +#1416 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, 1.981438871123700300 ) ) ; +#1417 = CARTESIAN_POINT ( 'NONE', ( 20.09604722621882500, -27.96340406021231600, 27.45756719881666200 ) ) ; +#1418 = CARTESIAN_POINT ( 'NONE', ( 37.23609302805116500, -35.53526422174804400, 14.09039230290881400 ) ) ; +#1419 = EDGE_LOOP ( 'NONE', ( #3426, #3574, #3714 ) ) ; +#1420 = CARTESIAN_POINT ( 'NONE', ( 6.912848471445856000, -30.35697320306280400, 24.25452136313142000 ) ) ; +#1421 = CARTESIAN_POINT ( 'NONE', ( 40.80382809320457900, -18.24410814163393000, -8.222698212558103800 ) ) ; +#1422 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983000, 27.93782961424066300 ) ) ; +#1423 = CARTESIAN_POINT ( 'NONE', ( 5.981500971865583200, -30.51255251419738800, 21.40184962804406900 ) ) ; +#1424 = CARTESIAN_POINT ( 'NONE', ( 39.96338653995167100, -29.81152152324898500, 21.83319919904999300 ) ) ; +#1425 = CARTESIAN_POINT ( 'NONE', ( 16.17140234132058700, -27.29202104598670800, 21.46271269173902500 ) ) ; +#1426 = PLANE ( 'NONE', #6377 ) ; +#1427 = ORIENTED_EDGE ( 'NONE', *, *, #13055, .F. ) ; +#1428 = CARTESIAN_POINT ( 'NONE', ( 8.655159714735763300, -93.13341222092354600, 20.37534970955495700 ) ) ; +#1429 = DIRECTION ( 'NONE', ( -0.8944271909999149700, -0.4472135954999597600, -0.0000000000000000000 ) ) ; +#1430 = CARTESIAN_POINT ( 'NONE', ( 10.52111743115875000, -16.36275948471545400, -24.85040084681490300 ) ) ; +#1431 = CARTESIAN_POINT ( 'NONE', ( 15.01106908957322300, -16.96165419668170000, 23.77247253476275500 ) ) ; +#1432 = CARTESIAN_POINT ( 'NONE', ( 5.189603100589836000, -29.74640495640829100, 22.16400174300655800 ) ) ; +#1433 = CARTESIAN_POINT ( 'NONE', ( 33.53794834516991600, -20.95400124810619100, -24.69804026700648700 ) ) ; +#1434 = CARTESIAN_POINT ( 'NONE', ( 39.74856777272858500, -19.84163983800239400, 10.81138121252832800 ) ) ; +#1435 = EDGE_LOOP ( 'NONE', ( #781, #892, #918, #950, #1198, #1227, #1380 ) ) ; +#1436 = CARTESIAN_POINT ( 'NONE', ( 33.25617125258496300, -30.37478888068294900, 27.26096614471178400 ) ) ; +#1437 = DIRECTION ( 'NONE', ( -0.8646911947423455700, 0.005406040221159397200, -0.5022747380310723700 ) ) ; +#1438 = CARTESIAN_POINT ( 'NONE', ( 14.05188414070410200, -28.67366141914122200, 28.34865685377055700 ) ) ; +#1439 = LINE ( 'NONE', #9838, #1127 ) ; +#1440 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.734723475976807600E-016 ) ) ; +#1441 = CARTESIAN_POINT ( 'NONE', ( 44.22898191071126200, -9.016275394255671900, -18.73833573344957400 ) ) ; +#1442 = ORIENTED_EDGE ( 'NONE', *, *, #12592, .F. ) ; +#1443 = CARTESIAN_POINT ( 'NONE', ( 12.73986533733070400, -30.77646223110350800, 27.61726868689674700 ) ) ; +#1444 = CARTESIAN_POINT ( 'NONE', ( 8.994168469789446600, -29.93963823361388400, 25.78922214925911400 ) ) ; +#1445 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000000, -17.49999999999999600 ) ) ; +#1446 = CARTESIAN_POINT ( 'NONE', ( 34.36006669529933100, -29.04582310753104900, 27.10713928904236200 ) ) ; +#1447 = CARTESIAN_POINT ( 'NONE', ( 35.28789710828828400, -10.63966146636749200, 24.88721042495988200 ) ) ; +#1448 = EDGE_CURVE ( 'NONE', #9688, #5963, #10886, .T. ) ; +#1449 = CARTESIAN_POINT ( 'NONE', ( 37.87416328033605600, -30.94974942537740500, 23.59197941498371500 ) ) ; +#1450 = FACE_OUTER_BOUND ( 'NONE', #10463, .T. ) ; +#1451 = CARTESIAN_POINT ( 'NONE', ( 35.14329510838359000, -29.88652747427546400, 26.27039447189812500 ) ) ; +#1452 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, -3.189999999999994200 ) ) ; +#1453 = CARTESIAN_POINT ( 'NONE', ( 39.89131319606261900, -28.86880190225204100, 15.22480331321724900 ) ) ; +#1454 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #13051, #12851, #12771, #12757 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 1.570796326794896600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#1455 = CARTESIAN_POINT ( 'NONE', ( 7.299973477785989900, -29.26833238683902700, 24.10421622963935600 ) ) ; +#1456 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983000, 27.93782961424065500 ) ) ; +#1457 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, 1.368992230496410400, -7.763940748012489100 ) ) ; +#1458 = CARTESIAN_POINT ( 'NONE', ( 38.89763560376139400, -30.60781135204130600, 21.70115700865560600 ) ) ; +#1459 = FACE_OUTER_BOUND ( 'NONE', #6034, .T. ) ; +#1460 = CARTESIAN_POINT ( 'NONE', ( 16.06969241612516400, -20.03731109948176600, 22.70485303045298100 ) ) ; +#1461 = CARTESIAN_POINT ( 'NONE', ( 39.99549336703188400, -27.46512202100965500, 9.266276941823404600 ) ) ; +#1462 = ORIENTED_EDGE ( 'NONE', *, *, #9790, .F. ) ; +#1463 = EDGE_CURVE ( 'NONE', #330, #8914, #8969, .T. ) ; +#1464 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#1465 = CARTESIAN_POINT ( 'NONE', ( 6.773767786653690900, -97.42943879684783300, 18.67382214457744300 ) ) ; +#1466 = CARTESIAN_POINT ( 'NONE', ( 39.99846943777173200, -27.34521567342949300, 7.997500217445670000 ) ) ; +#1467 = EDGE_CURVE ( 'NONE', #6650, #1870, #7597, .T. ) ; +#1468 = CARTESIAN_POINT ( 'NONE', ( 37.18670245077826300, -12.49999999999999100, -13.07153008137059800 ) ) ; +#1469 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 10.00000000000000000, 25.00000000000000400 ) ) ; +#1470 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1471 = CARTESIAN_POINT ( 'NONE', ( 17.70526873029629700, -18.66315854685735700, 23.47245141003396900 ) ) ; +#1472 = CARTESIAN_POINT ( 'NONE', ( 6.217130168783979700, -28.93521564251181400, 22.32485240963474400 ) ) ; +#1473 = CARTESIAN_POINT ( 'NONE', ( 31.98338896532782600, -21.56075320928155700, -25.58554125084715700 ) ) ; +#1474 = CARTESIAN_POINT ( 'NONE', ( 10.84125518652356300, -30.78786998798061700, 26.80958925385662200 ) ) ; +#1475 = CARTESIAN_POINT ( 'NONE', ( 9.922220727681770200, -95.07596123493894400, 13.24180778520156000 ) ) ; +#1476 = CARTESIAN_POINT ( 'NONE', ( 33.27159779490952500, -30.67722646846149500, 27.24364759602535500 ) ) ; +#1477 = CARTESIAN_POINT ( 'NONE', ( 16.56156865233757700, -27.29338901791442100, 21.55963004006774900 ) ) ; +#1478 = CIRCLE ( 'NONE', #3739, 4.999999999999999100 ) ; +#1479 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, -1.981438871123700300 ) ) ; +#1480 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1481 = CARTESIAN_POINT ( 'NONE', ( 12.74082991151434300, -30.61556876125488500, 27.63775020797902500 ) ) ; +#1482 = CARTESIAN_POINT ( 'NONE', ( 9.210888509878101300, -31.05974408563925200, 25.65978667167163300 ) ) ; +#1483 = CARTESIAN_POINT ( 'NONE', ( 34.36517953094683300, -19.39750452589969100, -24.35341071039612600 ) ) ; +#1484 = CARTESIAN_POINT ( 'NONE', ( 36.46600318550662200, -28.48511287729323300, 23.83349139541835300 ) ) ; +#1485 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1486 = CARTESIAN_POINT ( 'NONE', ( 38.03903304349792300, -29.58105151569155600, 24.12020226734424700 ) ) ; +#1487 = VECTOR ( 'NONE', #10776, 1000.000000000000100 ) ; +#1488 = CARTESIAN_POINT ( 'NONE', ( 35.23630302716740900, -30.59314630228800500, 26.30036929580951700 ) ) ; +#1489 = DIRECTION ( 'NONE', ( -0.5341186287284848100, -0.7978554261803599800, -0.2795425000957085200 ) ) ; +#1490 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1491 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1492 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1493 = CARTESIAN_POINT ( 'NONE', ( 39.51821241427165200, -29.13501009258932900, 10.34245753972200700 ) ) ; +#1494 = CARTESIAN_POINT ( 'NONE', ( 7.226516423613913900, -30.72797624187878200, 24.21378388400400500 ) ) ; +#1495 = CARTESIAN_POINT ( 'NONE', ( 20.00735423513291500, -27.96523496585093600, 27.45710953202296900 ) ) ; +#1496 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -31.29513776008465000, 28.74509265499354200 ) ) ; +#1497 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #12632, #10607, #8678 ), + ( #2540, #9682, #3554 ), + ( #10687, #4567, #11710 ), + ( #5608, #12672, #6652 ), + ( #576, #7691, #1586 ), + ( #8720, #2584, #9723 ), + ( #3604, #10729, #4612 ), + ( #11748, #5658, #12711 ), + ( #6697, #620, #7737 ), + ( #1625, #8763, #2622 ), + ( #9762, #3649, #10775 ), + ( #4654, #11788, #5701 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -1.691355389077386900E-017, 0.002568877798978228900, 0.005137755597956474200, 0.006422194497445597700, 0.007706633396934720400, 0.01027551119591296600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7936328294987480300, 1.000000000000000000), + ( 1.000000000000000000, 0.7934432254992792600, 1.000000000000000000), + ( 1.000000000000000000, 0.7932385553353683600, 1.000000000000000000), + ( 1.000000000000000000, 0.7926572192647528500, 1.000000000000000000), + ( 1.000000000000000000, 0.7923011216595288200, 1.000000000000000000), + ( 1.000000000000000000, 0.7916379614459334600, 1.000000000000000000), + ( 1.000000000000000000, 0.7913967904755764300, 1.000000000000000000), + ( 1.000000000000000000, 0.7908281920455467700, 1.000000000000000000), + ( 1.000000000000000000, 0.7905030025546475600, 1.000000000000000000), + ( 1.000000000000000000, 0.7892765309398861500, 1.000000000000000000), + ( 1.000000000000000000, 0.7882507581013801200, 1.000000000000000000), + ( 1.000000000000000000, 0.7865975011629552400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1498 = CARTESIAN_POINT ( 'NONE', ( 39.83879266948155600, -29.48600458908138600, 21.94475529867800700 ) ) ; +#1499 = CIRCLE ( 'NONE', #7504, 3.189999999999994200 ) ; +#1500 = CARTESIAN_POINT ( 'NONE', ( 14.64047363389437000, -28.66208803700784800, 28.53712895315367600 ) ) ; +#1501 = CARTESIAN_POINT ( 'NONE', ( 10.34310965082919200, -95.07596123493894400, 14.66486205871748200 ) ) ; +#1502 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1503 = CARTESIAN_POINT ( 'NONE', ( 39.99939029071705200, -27.24997130928269200, 7.531355035450968000 ) ) ; +#1504 = CARTESIAN_POINT ( 'NONE', ( 31.30405623837523900, -12.49999999999999600, -21.21125909767886200 ) ) ; +#1505 = CARTESIAN_POINT ( 'NONE', ( 33.22523694414999100, -18.61929345245809100, -24.85547062735936700 ) ) ; +#1506 = ORIENTED_EDGE ( 'NONE', *, *, #9229, .F. ) ; +#1507 = CARTESIAN_POINT ( 'NONE', ( 5.494918953354930300, -30.13751595591491700, 22.41505691482035100 ) ) ; +#1508 = CARTESIAN_POINT ( 'NONE', ( 31.15815384596222200, -21.86217975211701500, -25.98061902028498300 ) ) ; +#1509 = ORIENTED_EDGE ( 'NONE', *, *, #5859, .F. ) ; +#1510 = CARTESIAN_POINT ( 'NONE', ( 10.86030550432773400, -30.25685448622337500, 26.86309078263466400 ) ) ; +#1511 = CIRCLE ( 'NONE', #8749, 7.500000000000001800 ) ; +#1512 = EDGE_CURVE ( 'NONE', #462, #11868, #3089, .T. ) ; +#1514 = CARTESIAN_POINT ( 'NONE', ( 19.01235033525408000, -89.20772034659545100, 11.03354182248491000 ) ) ; +#1513 = AXIS2_PLACEMENT_3D ( 'NONE', #9065, #2937, #10064 ) ; +#1515 = CARTESIAN_POINT ( 'NONE', ( 33.25693790870640500, -31.01099572250770100, 27.15057424183696400 ) ) ; +#1516 = CARTESIAN_POINT ( 'NONE', ( 37.41603483285177100, -35.31373364390469000, 13.85533360785879600 ) ) ; +#1517 = CARTESIAN_POINT ( 'NONE', ( 4.110400520551377400, -17.92799316548155300, -14.17798297256061500 ) ) ; +#1518 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1519 = CARTESIAN_POINT ( 'NONE', ( 12.94476168252138300, -30.82145604680586400, 27.67974062839856600 ) ) ; +#1520 = EDGE_LOOP ( 'NONE', ( #2479, #2489, #2642, #2669 ) ) ; +#1521 = CARTESIAN_POINT ( 'NONE', ( 9.112595170634897100, -30.31503708119170100, 25.93851963083827200 ) ) ; +#1522 = CARTESIAN_POINT ( 'NONE', ( 0.09712465669868142200, 10.19006527892301500, -17.14065433413488300 ) ) ; +#1523 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999998200, -12.49999999999999600, 9.327783369942693500 ) ) ; +#1524 = CARTESIAN_POINT ( 'NONE', ( 3.844629486347488800, -11.23571604708995900, -22.46755997374656700 ) ) ; +#1525 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1026, #16, #2032, #9164, #3047, #10178, #4044, #11195, #5083, #12181, #6111, #62, #7170, #1069, #8193, #2079, #9211, #3087, #10219, #4096, #11238, #5124, #12224, #6159, #106 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 1, 2, 2, 4 ), + ( 0.0000000000000000000, 0.1250000000000003900, 0.1875000000000004700, 0.2500000000000005600, 0.3749999999999998900, 0.4374999999999999400, 0.5000000000000000000, 0.6250000000000002200, 0.6875000000000003300, 0.7500000000000004400, 0.8125000000000005600, 0.8750000000000005600, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#1526 = ORIENTED_EDGE ( 'NONE', *, *, #23, .T. ) ; +#1527 = CARTESIAN_POINT ( 'NONE', ( 38.03903610719799400, -30.69121793761842900, 23.92446430898723600 ) ) ; +#1528 = CARTESIAN_POINT ( 'NONE', ( 0.5374137513097500000, -10.92342381376673400, -13.38312754611369600 ) ) ; +#1529 = CARTESIAN_POINT ( 'NONE', ( 35.13865165253375300, -31.15632116227267200, 26.03879006981460600 ) ) ; +#1530 = CARTESIAN_POINT ( 'NONE', ( 34.64296221999150300, -14.53235611328388500, -24.98960871164566900 ) ) ; +#1531 = VERTEX_POINT ( 'NONE', #11215 ) ; +#1532 = ORIENTED_EDGE ( 'NONE', *, *, #5195, .F. ) ; +#1533 = CARTESIAN_POINT ( 'NONE', ( 44.81771847877659100, -10.36456304244675800, 8.005331014629273800 ) ) ; +#1534 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000000, -17.49999999999999600 ) ) ; +#1535 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.00000000000000000, 0.0000000000000000000 ) ) ; +#1536 = CARTESIAN_POINT ( 'NONE', ( 7.226498739324035200, -29.64550125736051800, 24.40465233373495100 ) ) ; +#1537 = ORIENTED_EDGE ( 'NONE', *, *, #11492, .T. ) ; +#1538 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1539 = CARTESIAN_POINT ( 'NONE', ( 35.44290399610504500, -19.48148411077479000, -23.50344573072932200 ) ) ; +#1540 = CARTESIAN_POINT ( 'NONE', ( 7.905584275778427800, -94.84290092601878500, 15.05025520695941700 ) ) ; +#1541 = EDGE_CURVE ( 'NONE', #3100, #142, #9548, .T. ) ; +#1542 = CARTESIAN_POINT ( 'NONE', ( 39.07167867684162800, -30.54211781324609000, 21.76531352987344200 ) ) ; +#1543 = ORIENTED_EDGE ( 'NONE', *, *, #1558, .F. ) ; +#1544 = AXIS2_PLACEMENT_3D ( 'NONE', #3288, #10417, #4293 ) ; +#1545 = CARTESIAN_POINT ( 'NONE', ( 16.49953127096480500, -20.01384545781165200, 22.81373943744575400 ) ) ; +#1546 = ORIENTED_EDGE ( 'NONE', *, *, #9790, .T. ) ; +#1547 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000900, 17.50000000000000400 ) ) ; +#1548 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000001800, -21.17506671135420100, 30.64523381671439500 ) ) ; +#1549 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1550 = ORIENTED_EDGE ( 'NONE', *, *, #970, .F. ) ; +#1551 = PLANE ( 'NONE', #639 ) ; +#1552 = CARTESIAN_POINT ( 'NONE', ( 15.18370575977180300, -19.17762784124130300, 22.57740612321118700 ) ) ; +#1553 = CARTESIAN_POINT ( 'NONE', ( 6.177157540394771800, -29.05382216336155900, 22.60326772823519500 ) ) ; +#1554 = CARTESIAN_POINT ( 'NONE', ( 29.46446681677918600, -22.45030252375221700, -26.63425476418209900 ) ) ; +#1555 = CARTESIAN_POINT ( 'NONE', ( 13.33977579956018800, -100.0000000000000100, -36.41976309893834000 ) ) ; +#1556 = CARTESIAN_POINT ( 'NONE', ( 10.95657655890602600, -30.99024143649066000, 26.78483239627888000 ) ) ; +#1557 = ORIENTED_EDGE ( 'NONE', *, *, #459, .T. ) ; +#1558 = EDGE_CURVE ( 'NONE', #10335, #752, #9140, .T. ) ; +#1559 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -97.51638471114853200, 22.06850012136331100 ) ) ; +#1560 = EDGE_CURVE ( 'NONE', #3780, #11427, #11074, .T. ) ; +#1561 = ORIENTED_EDGE ( 'NONE', *, *, #10280, .F. ) ; +#1562 = CARTESIAN_POINT ( 'NONE', ( 29.34752224758852900, -28.08124121815427900, 26.96588792517640000 ) ) ; +#1563 = CARTESIAN_POINT ( 'NONE', ( 33.16909215976213700, -30.58814928428607500, 27.29563017468160500 ) ) ; +#1564 = CARTESIAN_POINT ( 'NONE', ( 27.19325152697234700, -39.40499146286329300, 19.69197091800286300 ) ) ; +#1565 = DIRECTION ( 'NONE', ( 0.5022676430279096000, 0.0000000000000000000, 0.8647122149982550100 ) ) ; +#1566 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -5.000000000000000900, 22.50000000000000400 ) ) ; +#1567 = CARTESIAN_POINT ( 'NONE', ( 12.94443081870490000, -30.68777193729590300, 27.70086158596265200 ) ) ; +#1568 = CARTESIAN_POINT ( 'NONE', ( 9.335806021474997600, -31.16809519642159300, 25.64926968598279400 ) ) ; +#1569 = CARTESIAN_POINT ( 'NONE', ( 15.60576528675771800, -14.74214783387027500, -25.83616860961949500 ) ) ; +#1570 = CARTESIAN_POINT ( 'NONE', ( 16.85532302564397300, -25.71508218979860100, 21.89516158891587600 ) ) ; +#1571 = CARTESIAN_POINT ( 'NONE', ( 3.009432524362582100, -9.309391592743082800, -23.97621615975568000 ) ) ; +#1572 = ORIENTED_EDGE ( 'NONE', *, *, #6759, .T. ) ; +#1573 = CARTESIAN_POINT ( 'NONE', ( 10.79386111518853400, -11.72155936984869800, -24.99999999999616000 ) ) ; +#1574 = VERTEX_POINT ( 'NONE', #9801 ) ; +#1575 = APPROVAL_DATE_TIME ( #4248, #5788 ) ; +#1576 = CARTESIAN_POINT ( 'NONE', ( 37.71719532013123900, -29.26396686452922000, 24.08416294910301000 ) ) ; +#1577 = VERTEX_POINT ( 'NONE', #10211 ) ; +#1578 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.848331073412727400, -15.47246577577314900 ) ) ; +#1579 = AXIS2_PLACEMENT_3D ( 'NONE', #1820, #8958, #2835 ) ; +#1580 = CARTESIAN_POINT ( 'NONE', ( 35.04069138337856500, -30.45518038211090000, 26.42587494770276600 ) ) ; +#1581 = CARTESIAN_POINT ( 'NONE', ( 12.90136799010447000, -10.00000000000003000, -24.99999999999999300 ) ) ; +#1582 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -5.000000000000000900, -23.00000000000000000 ) ) ; +#1583 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1584 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -19.99999999999990400, -7.373247840169503000 ) ) ; +#1585 = CARTESIAN_POINT ( 'NONE', ( 7.567205882487402700, -31.02001431673278400, 24.10596643476787500 ) ) ; +#1586 = CARTESIAN_POINT ( 'NONE', ( 10.87257262324399500, -30.94309737860343300, 26.87549806555128700 ) ) ; +#1587 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000700, -8.823239344872210000, -12.28508127950587300 ) ) ; +#1588 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -95.07914007940519200, 12.91380915039129500 ) ) ; +#1589 = VECTOR ( 'NONE', #9816, 1000.000000000000000 ) ; +#1590 = CARTESIAN_POINT ( 'NONE', ( 39.25407341876094600, -29.11693196565564500, 22.17372143453213000 ) ) ; +#1591 = ORIENTED_EDGE ( 'NONE', *, *, #10779, .T. ) ; +#1592 = CARTESIAN_POINT ( 'NONE', ( 4.043087179667941700, -17.92237876968916800, -13.65230858770742000 ) ) ; +#1593 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000003600, -95.07596123493894400, 11.50239124669686300 ) ) ; +#1594 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884033500E-016, -8.696931547896774400, 9.522992621654053000 ) ) ; +#1595 = AXIS2_PLACEMENT_3D ( 'NONE', #11858, #5770, #12817 ) ; +#1596 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1597 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -90.07596123493894400, 10.95758058754439400 ) ) ; +#1598 = FACE_OUTER_BOUND ( 'NONE', #13014, .T. ) ; +#1599 = CARTESIAN_POINT ( 'NONE', ( 6.085031402840185100, -30.58114044191559000, 22.54386955500451600 ) ) ; +#1600 = CARTESIAN_POINT ( 'NONE', ( 6.463728796662079100, -9.290765509422726600, -24.87844267190626400 ) ) ; +#1601 = ORIENTED_EDGE ( 'NONE', *, *, #2986, .T. ) ; +#1602 = CARTESIAN_POINT ( 'NONE', ( 18.17651462047582500, -97.40634803306923600, 22.08790255657622800 ) ) ; +#1603 = CARTESIAN_POINT ( 'NONE', ( 10.93924590259625200, -30.49084201778481100, 26.91009795837314700 ) ) ; +#1604 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -95.80543125211710300, 21.80032795718639300 ) ) ; +#1605 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1606 = CARTESIAN_POINT ( 'NONE', ( 33.16556841930602000, -30.90322662599247700, 27.23167753767740300 ) ) ; +#1607 = CARTESIAN_POINT ( 'NONE', ( 9.796267287742875100, -12.50000000000000000, 16.69332120610842900 ) ) ; +#1608 = CARTESIAN_POINT ( 'NONE', ( 1.011088052532172800, -8.017350242017474900, -21.63709339165948700 ) ) ; +#1609 = CARTESIAN_POINT ( 'NONE', ( 42.49999999999999300, 12.00000000000000000, -22.50000000000000000 ) ) ; +#1610 = CARTESIAN_POINT ( 'NONE', ( 13.25175364980986000, -30.85765799134022900, 27.77374670116640600 ) ) ; +#1611 = CARTESIAN_POINT ( 'NONE', ( 9.196707415536019800, -30.51248504575385600, 25.97603522673149700 ) ) ; +#1612 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1613 = CARTESIAN_POINT ( 'NONE', ( 5.458813898368719100, -10.95517343116359800, -24.14446186333233900 ) ) ; +#1614 = CARTESIAN_POINT ( 'NONE', ( 11.35228933868426900, -13.41914980536904200, -25.15601430610437800 ) ) ; +#1615 = CARTESIAN_POINT ( 'NONE', ( 38.10670493481334400, -30.35377049927069100, 24.23421001551414400 ) ) ; +#1616 = CARTESIAN_POINT ( 'NONE', ( 1.416647094394588100E-011, -6.671126378227439700, -19.92580150232842600 ) ) ; +#1617 = EDGE_CURVE ( 'NONE', #9827, #5941, #1232, .T. ) ; +#1618 = CARTESIAN_POINT ( 'NONE', ( 34.96992491854956600, -31.10575879619522500, 26.18877073301003100 ) ) ; +#1619 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -39.52045731841470700, 19.79474689191102500 ) ) ; +#1620 = CARTESIAN_POINT ( 'NONE', ( 12.07146785257210400, -10.41715857995486300, -25.05226846804358900 ) ) ; +#1621 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.186620743767935600E-016, -6.729660650912597500E-016 ) ) ; +#1622 = CARTESIAN_POINT ( 'NONE', ( 8.618269020382829400, -23.38953771650357200, -22.06278122541018800 ) ) ; +#1623 = EDGE_LOOP ( 'NONE', ( #7296, #7310 ) ) ; +#1624 = CARTESIAN_POINT ( 'NONE', ( 7.220176470418989500, -30.06601508497549000, 24.61005531963120400 ) ) ; +#1625 = CARTESIAN_POINT ( 'NONE', ( 7.400576339239120400, -28.61651213332697500, 22.99845019460721600 ) ) ; +#1626 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -6.905123832532437300, -17.07003433599417600 ) ) ; +#1627 = AXIS2_PLACEMENT_3D ( 'NONE', #2815, #7923, #10961 ) ; +#1628 = CARTESIAN_POINT ( 'NONE', ( 39.81072256191733100, -95.07596123493893000, -2.472754691319197100 ) ) ; +#1629 = FACE_OUTER_BOUND ( 'NONE', #4694, .T. ) ; +#1630 = CARTESIAN_POINT ( 'NONE', ( 39.55658387753708600, -30.27204144760371900, 21.96082554385674300 ) ) ; +#1631 = CARTESIAN_POINT ( 'NONE', ( 1.167848377711038900, -8.214099399745217400, -21.87953111947442900 ) ) ; +#1632 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000002100, -27.09143239524033200, 6.754920151478382100 ) ) ; +#1633 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999998200, -22.03038540351067800, -11.52199000773743400 ) ) ; +#1634 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -30.66316004106086300, 28.85652737806402600 ) ) ; +#1635 = EDGE_CURVE ( 'NONE', #10310, #4975, #434, .T. ) ; +#1636 = CARTESIAN_POINT ( 'NONE', ( 5.835740195836381300, -29.41537230954654400, 22.75879054749974300 ) ) ; +#1637 = FACE_OUTER_BOUND ( 'NONE', #2647, .T. ) ; +#1638 = CARTESIAN_POINT ( 'NONE', ( 28.59174571517475600, -22.74048382254263600, -26.89553930523086900 ) ) ; +#1639 = CARTESIAN_POINT ( 'NONE', ( 8.340391219197014600, -99.99999999999998600, 19.04337566497151000 ) ) ; +#1640 = CARTESIAN_POINT ( 'NONE', ( 11.16062257996282800, -31.07054473873468200, 26.84740944486941300 ) ) ; +#1641 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000900, 17.50000000000000400 ) ) ; +#1642 = CARTESIAN_POINT ( 'NONE', ( 38.28799367709281400, -7.463541018600224700, -24.99999999999999600 ) ) ; +#1643 = CARTESIAN_POINT ( 'NONE', ( 32.86374626020612100, -30.51704340113673600, 27.42059341433304100 ) ) ; +#1644 = CARTESIAN_POINT ( 'NONE', ( 19.16666387694276000, -12.50000000000000400, 22.05918254822885400 ) ) ; +#1645 = CARTESIAN_POINT ( 'NONE', ( 10.31832055150654700, -12.17311659256239600, 24.43095280969653900 ) ) ; +#1646 = CARTESIAN_POINT ( 'NONE', ( 5.160588868859135500, -7.722135492183813500, 25.00000000000000400 ) ) ; +#1647 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999941700, -97.51638471114853200, 22.06850012136332100 ) ) ; +#1648 = CARTESIAN_POINT ( 'NONE', ( 13.25243196596319200, -30.77521477997644100, 27.78932852379427500 ) ) ; +#1649 = AXIS2_PLACEMENT_3D ( 'NONE', #7812, #1696, #8832 ) ; +#1650 = CARTESIAN_POINT ( 'NONE', ( 9.335432814038934900, -29.72411159935998300, 25.90445693990521300 ) ) ; +#1651 = FACE_OUTER_BOUND ( 'NONE', #1409, .T. ) ; +#1652 = CARTESIAN_POINT ( 'NONE', ( 10.99420320457749700, -18.59163345072918700, -24.70731886731105200 ) ) ; +#1653 = CARTESIAN_POINT ( 'NONE', ( 35.28249014715528600, -11.86526873170811500, 24.28111829738948700 ) ) ; +#1654 = CARTESIAN_POINT ( 'NONE', ( 5.595610336903857500, -9.267089116076226300, -24.65669081623352500 ) ) ; +#1655 = CARTESIAN_POINT ( 'NONE', ( 34.23629136916074600, -12.34547223009419300, 24.58643465046051100 ) ) ; +#1656 = CARTESIAN_POINT ( 'NONE', ( 37.64955182559543100, -29.20224630217623100, 24.07155155025999000 ) ) ; +#1657 = CARTESIAN_POINT ( 'NONE', ( 24.85475939093772300, -30.65997548273778900, 28.85708890161802000 ) ) ; +#1658 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #11120, #10092, #4997 ), + ( #12104, #6035, #13060 ), + ( #7089, #995, #8118 ), + ( #1998, #9137, #3015 ), + ( #10139, #4009, #11161 ), + ( #5049, #12146, #6079 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( -1.751637029867581000E-015, 0.004920328778343703600, 0.009840657556689159200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8982413445597439100, 1.000000000000000000), + ( 1.000000000000000000, 0.8894025830646079500, 1.000000000000000000), + ( 1.000000000000000000, 0.8819224558718563600, 1.000000000000000000), + ( 1.000000000000000000, 0.8686879186444482800, 1.000000000000000000), + ( 1.000000000000000000, 0.8629451265000839300, 1.000000000000000000), + ( 1.000000000000000000, 0.8578769091425410000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1659 = ORIENTED_EDGE ( 'NONE', *, *, #1974, .F. ) ; +#1660 = CARTESIAN_POINT ( 'NONE', ( 34.63289850591180400, -30.27215385505121900, 26.62737758756962900 ) ) ; +#1661 = ORIENTED_EDGE ( 'NONE', *, *, #6485, .F. ) ; +#1662 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457639500, -30.82655086342984400, 27.93782961424069500 ) ) ; +#1663 = CIRCLE ( 'NONE', #8319, 2.500000000000000000 ) ; +#1664 = CARTESIAN_POINT ( 'NONE', ( 10.56726868350897800, -10.97254818603842700, -25.00000000000000000 ) ) ; +#1665 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999998200, 51.02052347080197600, 20.52816548656996800 ) ) ; +#1666 = CARTESIAN_POINT ( 'NONE', ( 19.49500059215148800, -23.91416269884750900, -27.45344229777402800 ) ) ; +#1667 = CARTESIAN_POINT ( 'NONE', ( 7.886749698555468600, -31.10686360316098100, 24.34857567049807500 ) ) ; +#1668 = CARTESIAN_POINT ( 'NONE', ( 42.73779523504938300, -9.152235207945207000, -23.34933521456971300 ) ) ; +#1669 = CARTESIAN_POINT ( 'NONE', ( 38.06477187982766700, -89.64557226225463200, 3.275176570731226400 ) ) ; +#1670 = CARTESIAN_POINT ( 'NONE', ( 38.81147049918360600, -28.94676998552893500, 22.32175903714843900 ) ) ; +#1671 = ORIENTED_EDGE ( 'NONE', *, *, #1448, .T. ) ; +#1672 = VERTEX_POINT ( 'NONE', #9748 ) ; +#1673 = DIRECTION ( 'NONE', ( -0.8646995353985702500, -0.005415397997234572400, 0.5022602780889885400 ) ) ; +#1674 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000005000, -27.27822912887814200, 8.010598728925371500 ) ) ; +#1675 = VECTOR ( 'NONE', #558, 1000.000000000000000 ) ; +#1676 = CARTESIAN_POINT ( 'NONE', ( 34.88576150261690100, -13.36407974372636600, -29.99999999999987200 ) ) ; +#1677 = CARTESIAN_POINT ( 'NONE', ( 26.20873314127088300, -99.99999999999997200, 21.63052364494856800 ) ) ; +#1678 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1679 = CARTESIAN_POINT ( 'NONE', ( 20.01559777261488500, -25.57219343641028400, 22.25467052783106300 ) ) ; +#1680 = CARTESIAN_POINT ( 'NONE', ( 6.650584190990603200, -30.85796237697315900, 22.85778045238440400 ) ) ; +#1681 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -23.91420473869551000, -27.45344971053349800 ) ) ; +#1682 = CARTESIAN_POINT ( 'NONE', ( 25.50499944508535700, -23.91416269884443900, -27.45344229777349900 ) ) ; +#1683 = CARTESIAN_POINT ( 'NONE', ( 11.13253343649244600, -30.64046776182880200, 26.98521762294052800 ) ) ; +#1684 = ORIENTED_EDGE ( 'NONE', *, *, #11412, .T. ) ; +#1685 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6605, #8637, #1539, #8679, #2541, #9683 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 3.538155541877297300E-017, 0.001461864617875609800, 0.002923729235751184500 ), + .UNSPECIFIED. ) ; +#1686 = CARTESIAN_POINT ( 'NONE', ( 38.60594537777062400, -9.481368539326782100, -24.83828875986589000 ) ) ; +#1687 = CARTESIAN_POINT ( 'NONE', ( 32.86931541878787800, -30.78193182467704100, 27.38870634819397400 ) ) ; +#1688 = EDGE_LOOP ( 'NONE', ( #122, #8234 ) ) ; +#1689 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11610, #4461, #9619, #3493, #10628, #4500, #11652, #5548, #12612, #6582, #521, #7630, #1516, #8657, #2518, #9662, #3534, #10667, #4546, #11689, #5589, #12656, #6630, #556, #7673, #1564, #8699, #2561 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( -2.461485983707038500E-005, 0.003289411205404878800, 0.004946424238025850400, 0.006603437270646814200, 0.009917463335888752200, 0.01074596985219922900, 0.01157447636850970600, 0.01323148940113065900, 0.01488850243375161400, 0.01654551546637256900, 0.01985954153161448600, 0.02151655456423544300, 0.02317356759685640400, 0.02648759366209832400 ), + .UNSPECIFIED. ) ; +#1690 = CARTESIAN_POINT ( 'NONE', ( 1.243192411430548600, -8.301271685950483800, -22.00970884583216900 ) ) ; +#1691 = CARTESIAN_POINT ( 'NONE', ( 13.35395755263886400, -30.86407919420317800, 27.80528123946480100 ) ) ; +#1692 = VERTEX_POINT ( 'NONE', #9582 ) ; +#1693 = CARTESIAN_POINT ( 'NONE', ( 9.399002297557672100, -30.72438023985706200, 26.03106276619668300 ) ) ; +#1694 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.1736481776669238100, -0.9848077530122092400 ) ) ; +#1695 = VERTEX_POINT ( 'NONE', #9783 ) ; +#1696 = DIRECTION ( 'NONE', ( -0.9997116207813339100, 0.02364923651029129900, 0.004169998469919351100 ) ) ; +#1697 = CARTESIAN_POINT ( 'NONE', ( 6.198215089023748600, -7.950343612621376000, -24.99477936456869300 ) ) ; +#1698 = ORIENTED_EDGE ( 'NONE', *, *, #11371, .T. ) ; +#1699 = CARTESIAN_POINT ( 'NONE', ( 38.10227924508268400, -30.09569513387390300, 24.31438107731134900 ) ) ; +#1700 = EDGE_LOOP ( 'NONE', ( #6508, #11722, #5979, #2361 ) ) ; +#1701 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1702 = CARTESIAN_POINT ( 'NONE', ( 34.63289501615952300, -30.89928378891042000, 26.51680859160860800 ) ) ; +#1703 = CARTESIAN_POINT ( 'NONE', ( 33.13770950580973100, -30.40470422421613300, 27.31044659837774400 ) ) ; +#1704 = ORIENTED_EDGE ( 'NONE', *, *, #12189, .F. ) ; +#1705 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122091300, -0.1736481776669239500 ) ) ; +#1706 = ORIENTED_EDGE ( 'NONE', *, *, #6615, .T. ) ; +#1707 = CARTESIAN_POINT ( 'NONE', ( 7.539321103677302500, -30.36675541599455000, 24.84572151854131800 ) ) ; +#1708 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1709 = CARTESIAN_POINT ( 'NONE', ( 6.050532966968412500, -30.55079519729965300, 21.46087037243998800 ) ) ; +#1710 = CARTESIAN_POINT ( 'NONE', ( 35.07777927231943900, -95.07596123493894400, 13.24180778520150900 ) ) ; +#1711 = EDGE_CURVE ( 'NONE', #9374, #9952, #10583, .T. ) ; +#1712 = CARTESIAN_POINT ( 'NONE', ( 39.79487403531644700, -29.92624546784452400, 22.13229814127236500 ) ) ; +#1713 = CC_DESIGN_APPROVAL ( #1045, ( #398 ) ) ; +#1714 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000001400, -97.04531648070947400, 16.23785755017195600 ) ) ; +#1715 = CARTESIAN_POINT ( 'NONE', ( 9.355687943002077800, -100.0000000000000300, 0.5869512781180464800 ) ) ; +#1716 = ORIENTED_EDGE ( 'NONE', *, *, #1799, .F. ) ; +#1717 = CARTESIAN_POINT ( 'NONE', ( 36.29994652508225500, -31.05126521996016800, 25.25651015109802300 ) ) ; +#1718 = VERTEX_POINT ( 'NONE', #9542 ) ; +#1719 = ORIENTED_EDGE ( 'NONE', *, *, #7710, .F. ) ; +#1720 = CARTESIAN_POINT ( 'NONE', ( 44.61668111607552600, -7.417690988513003300, 16.27418758762333800 ) ) ; +#1721 = CARTESIAN_POINT ( 'NONE', ( 9.300783938880240200, -95.07596123493894400, 14.11443385165337700 ) ) ; +#1722 = CARTESIAN_POINT ( 'NONE', ( 5.957133941544127800, -29.87582777634721200, 23.18035942250386200 ) ) ; +#1723 = CARTESIAN_POINT ( 'NONE', ( 6.379403107081717600, -9.536489809676913500, -24.83147305994030100 ) ) ; +#1724 = CARTESIAN_POINT ( 'NONE', ( 36.05465172670194800, -23.42713944462476100, -22.44355759272503200 ) ) ; +#1725 = CARTESIAN_POINT ( 'NONE', ( 11.16069736291514600, -30.22370221891002700, 26.99657014199887000 ) ) ; +#1726 = CARTESIAN_POINT ( 'NONE', ( 2.013796632091467300, -9.007089286365513200, -23.16572775499006900 ) ) ; +#1727 = ORIENTED_EDGE ( 'NONE', *, *, #11621, .F. ) ; +#1728 = CARTESIAN_POINT ( 'NONE', ( 39.68452314086902500, -9.539292951137111800, -24.48619597830722900 ) ) ; +#1729 = CARTESIAN_POINT ( 'NONE', ( 32.66169996218429400, -30.52205175440124300, 27.49701618346730600 ) ) ; +#1730 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999992000, -89.56735749795936400, 4.661075975869773700 ) ) ; +#1731 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #389, #7494, #8517 ), + ( #2379, #9527, #3397 ), + ( #10534, #4409, #11555 ), + ( #5448, #12523, #6482 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( -1.084202172485504400E-019, 0.0001872366595206101300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7941643989882847300, 1.000000000000000000), + ( 1.000000000000000000, 0.7941643991125676400, 1.000000000000000000), + ( 1.000000000000000000, 0.7941518730292347300, 1.000000000000000000), + ( 1.000000000000000000, 0.7941268098083128500, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1732 = CARTESIAN_POINT ( 'NONE', ( 16.95379610260992800, -27.29302298276748600, 21.64092526671919400 ) ) ; +#1733 = ORIENTED_EDGE ( 'NONE', *, *, #4936, .F. ) ; +#1734 = CIRCLE ( 'NONE', #1544, 1.200000000000010200 ) ; +#1735 = CARTESIAN_POINT ( 'NONE', ( 13.35519853155631900, -30.80281180448725900, 27.81751601138832400 ) ) ; +#1736 = CARTESIAN_POINT ( 'NONE', ( 9.462832033476864500, -29.94452818637069700, 26.06904622092485400 ) ) ; +#1737 = CARTESIAN_POINT ( 'NONE', ( 44.96347564187619400, -5.615948075894751300, 16.52767185140055900 ) ) ; +#1738 = CARTESIAN_POINT ( 'NONE', ( 39.68470362732190200, -30.18038934075433500, 21.52657297568476800 ) ) ; +#1739 = CARTESIAN_POINT ( 'NONE', ( 5.050914693199412200, -26.09070479555660400, 8.384425546482932000 ) ) ; +#1740 = CARTESIAN_POINT ( 'NONE', ( 0.5278691658340004500, -11.05573833166792000, -11.53187062879840900 ) ) ; +#1741 = CARTESIAN_POINT ( 'NONE', ( 6.050532966968423100, -30.55079519729966000, 21.46087037244000200 ) ) ; +#1742 = CARTESIAN_POINT ( 'NONE', ( 37.66834986211757300, -31.01176903354855000, 23.76913959009873500 ) ) ; +#1743 = EDGE_LOOP ( 'NONE', ( #28, #807, #1442 ) ) ; +#1744 = CARTESIAN_POINT ( 'NONE', ( 26.16477727879125600, -21.52777639038359000, -27.03265800519858400 ) ) ; +#1745 = AXIS2_PLACEMENT_3D ( 'NONE', #11814, #5732, #12776 ) ; +#1746 = CYLINDRICAL_SURFACE ( 'NONE', #2712, 2.499999999999998700 ) ; +#1747 = CARTESIAN_POINT ( 'NONE', ( 34.41458811188852000, -30.10870578702566600, 26.70888267073739200 ) ) ; +#1748 = CARTESIAN_POINT ( 'NONE', ( 35.44301097895876000, -29.78273511197858200, 26.06044879205996500 ) ) ; +#1749 = ORIENTED_EDGE ( 'NONE', *, *, #5037, .F. ) ; +#1750 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1751 = CARTESIAN_POINT ( 'NONE', ( 7.872261251265776100, -29.36044107997434000, 24.67215536356586000 ) ) ; +#1752 = CARTESIAN_POINT ( 'NONE', ( 6.675142102940756500, -30.87282919084458800, 22.84907283364635300 ) ) ; +#1753 = CARTESIAN_POINT ( 'NONE', ( 26.83571142263767200, -95.07596123492979200, 9.913781257753985400 ) ) ; +#1754 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1755 = CARTESIAN_POINT ( 'NONE', ( 38.78113959097481000, -30.68491141720053900, 22.01618169655802100 ) ) ; +#1756 = CIRCLE ( 'NONE', #10489, 3.189999999999995100 ) ; +#1757 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1758 = CARTESIAN_POINT ( 'NONE', ( 10.03613340820112000, -12.49999999999999600, 17.06063187634654800 ) ) ; +#1759 = CARTESIAN_POINT ( 'NONE', ( 36.26605276307842700, -29.87948042875428800, 25.60211001856492200 ) ) ; +#1760 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9848077530122092400, 0.1736481776669238400 ) ) ; +#1761 = CARTESIAN_POINT ( 'NONE', ( 26.03118034529680700, -18.05070377480030100, -28.17057268066214700 ) ) ; +#1762 = CARTESIAN_POINT ( 'NONE', ( 44.98080874645361100, -5.505578519540288000, 16.44713232931071900 ) ) ; +#1763 = CARTESIAN_POINT ( 'NONE', ( 24.85960462362333000, -27.96255689439414700, 27.45771657700754200 ) ) ; +#1764 = CARTESIAN_POINT ( 'NONE', ( 12.54616206590097400, -95.07596123493894400, 16.62916692338009000 ) ) ; +#1765 = CARTESIAN_POINT ( 'NONE', ( 6.675133449236855500, -29.04261496165966200, 23.17179717693540700 ) ) ; +#1766 = CARTESIAN_POINT ( 'NONE', ( 11.23248595837017800, -30.74848672085019900, 27.00947099036403600 ) ) ; +#1767 = FACE_OUTER_BOUND ( 'NONE', #6960, .T. ) ; +#1768 = CARTESIAN_POINT ( 'NONE', ( 11.77040076301733300, -19.27410354484333500, 20.86770977231563200 ) ) ; +#1769 = CARTESIAN_POINT ( 'NONE', ( 28.50066813881424500, -20.01385634412569200, 22.81368892163532500 ) ) ; +#1770 = CARTESIAN_POINT ( 'NONE', ( 41.42965979895678400, -9.245766153746993500, -24.35222481971077700 ) ) ; +#1771 = EDGE_LOOP ( 'NONE', ( #9772, #9798, #9814, #9839 ) ) ; +#1772 = CARTESIAN_POINT ( 'NONE', ( 32.66701286176864700, -30.73589396898806200, 27.47580842919436300 ) ) ; +#1773 = FACE_OUTER_BOUND ( 'NONE', #5301, .T. ) ; +#1774 = PLANE ( 'NONE', #8580 ) ; +#1775 = CARTESIAN_POINT ( 'NONE', ( 13.35395461225789800, -30.74586783765803900, 27.82612089201950300 ) ) ; +#1776 = CARTESIAN_POINT ( 'NONE', ( 9.552729388364754800, -31.01632653738454300, 25.94194090423572500 ) ) ; +#1777 = CARTESIAN_POINT ( 'NONE', ( 0.02838215973449123900, 9.894538436513098400, 18.88806036896969700 ) ) ; +#1778 = CARTESIAN_POINT ( 'NONE', ( 10.65250694431770600, -20.62121261584477600, 19.81715663474608000 ) ) ; +#1779 = CARTESIAN_POINT ( 'NONE', ( 32.68167656173560000, -100.0000000000000100, 3.977574556406460200 ) ) ; +#1780 = CARTESIAN_POINT ( 'NONE', ( 6.047095015904250000, -30.54946208317066000, 21.46110543358275900 ) ) ; +#1781 = CARTESIAN_POINT ( 'NONE', ( 37.84825858489045200, -29.79962691704000500, 24.44732095316398800 ) ) ; +#1782 = CARTESIAN_POINT ( 'NONE', ( 31.07007410879261400, -19.39275250124442400, -26.65619568908445900 ) ) ; +#1783 = EDGE_CURVE ( 'NONE', #5688, #3916, #11638, .T. ) ; +#1784 = FACE_OUTER_BOUND ( 'NONE', #1280, .T. ) ; +#1785 = CARTESIAN_POINT ( 'NONE', ( 34.45625007436447600, -30.69551955951205700, 26.68791610500517900 ) ) ; +#1786 = CARTESIAN_POINT ( 'NONE', ( 37.48448064150260000, -29.24263927666351700, 24.26216433372367100 ) ) ; +#1787 = CARTESIAN_POINT ( 'NONE', ( 7.791795142658115100, -30.67022313948938400, 24.85808468895201200 ) ) ; +#1788 = CARTESIAN_POINT ( 'NONE', ( 16.36075878581830200, -22.72480830595554800, -26.88366143412933300 ) ) ; +#1789 = CARTESIAN_POINT ( 'NONE', ( 8.507327037107527800, -31.15493131996584000, 24.95216067971834000 ) ) ; +#1790 = CARTESIAN_POINT ( 'NONE', ( 36.65617149004590700, -18.01237507300756800, -23.06837513076633100 ) ) ; +#1791 = CARTESIAN_POINT ( 'NONE', ( 44.80437689999951100, 10.60749141855850300, -24.80437689999964200 ) ) ; +#1792 = CARTESIAN_POINT ( 'NONE', ( 39.53690978848526100, -29.63478832215243800, 22.50478095565827600 ) ) ; +#1793 = CIRCLE ( 'NONE', #5555, 2.499999999999998200 ) ; +#1794 = CARTESIAN_POINT ( 'NONE', ( 27.63106760410404000, -33.23184938068383300, 26.36754739010807600 ) ) ; +#1795 = DIRECTION ( 'NONE', ( -0.01909900421572749800, -0.9998175973836266300, 0.0000000000000000000 ) ) ; +#1796 = CARTESIAN_POINT ( 'NONE', ( 36.31437052298125700, -30.74010861470319600, 25.51712978808970100 ) ) ; +#1797 = CARTESIAN_POINT ( 'NONE', ( 6.656387761429173500, -10.80814302534716000, 23.51324224956147900 ) ) ; +#1798 = CARTESIAN_POINT ( 'NONE', ( 28.80190203564808000, -23.86662698796340700, -26.95905821332901200 ) ) ; +#1799 = EDGE_CURVE ( 'NONE', #11427, #2959, #108, .T. ) ; +#1800 = CARTESIAN_POINT ( 'NONE', ( 44.47213146979886700, -11.05573706040219900, 8.005331014629273800 ) ) ; +#1801 = CARTESIAN_POINT ( 'NONE', ( 18.77456914505811600, -94.71789415309243100, 18.78842146187861000 ) ) ; +#1802 = CARTESIAN_POINT ( 'NONE', ( 6.177126588802946300, -30.22810973763028400, 23.36712158481122600 ) ) ; +#1803 = CARTESIAN_POINT ( 'NONE', ( 5.766808421285253900, -10.63510431319028800, -24.40360653622739300 ) ) ; +#1804 = CARTESIAN_POINT ( 'NONE', ( 19.94237873759179900, -27.96664356504567900, 27.45669629622856800 ) ) ; +#1805 = CARTESIAN_POINT ( 'NONE', ( 11.24993021718039700, -30.31648555874918600, 27.04680920558034900 ) ) ; +#1806 = CIRCLE ( 'NONE', #7574, 3.189999999999994200 ) ; +#1807 = CARTESIAN_POINT ( 'NONE', ( 9.059912746405519400, -19.40537333942259900, 18.54177520408894300 ) ) ; +#1808 = CARTESIAN_POINT ( 'NONE', ( 33.97812529518493800, -20.55245580501646100, 20.11873665265241200 ) ) ; +#1809 = CARTESIAN_POINT ( 'NONE', ( 40.56851280561848200, -11.37838705692685100, -23.11992422676679500 ) ) ; +#1810 = CARTESIAN_POINT ( 'NONE', ( 32.66171534476129800, -30.96158404863555400, 27.41956185988369300 ) ) ; +#1811 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -95.07596123493894400, 15.95758058754439400 ) ) ; +#1812 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, 9.500000000000000000, 0.0000000000000000000 ) ) ; +#1813 = CARTESIAN_POINT ( 'NONE', ( 19.94205019309342600, -33.35025653084942100, 26.50741664928542100 ) ) ; +#1814 = CARTESIAN_POINT ( 'NONE', ( 13.56044890669046100, -30.82207986196703000, 27.87777379046617200 ) ) ; +#1815 = ORIENTED_EDGE ( 'NONE', *, *, #9025, .T. ) ; +#1816 = EDGE_CURVE ( 'NONE', #8090, #11083, #7900, .T. ) ; +#1817 = CARTESIAN_POINT ( 'NONE', ( 9.492414145786177900, -30.28517378584783900, 26.16631946071420200 ) ) ; +#1818 = VERTEX_POINT ( 'NONE', #8747 ) ; +#1819 = CARTESIAN_POINT ( 'NONE', ( 12.74203709439389000, -94.73840293382748700, 17.60207004560129500 ) ) ; +#1820 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000000, -17.49999999999999600 ) ) ; +#1821 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 9.500000000000000000, 0.0000000000000000000 ) ) ; +#1822 = CARTESIAN_POINT ( 'NONE', ( 5.000000264755541900, -29.65238133697569700, 21.61928388135647300 ) ) ; +#1823 = CIRCLE ( 'NONE', #9182, 3.189999999999994200 ) ; +#1824 = CARTESIAN_POINT ( 'NONE', ( 37.73031724228781100, -30.79165253376065100, 24.16278179934695600 ) ) ; +#1825 = CARTESIAN_POINT ( 'NONE', ( 36.11256677922337100, -19.76442305082527200, -22.73524393871869300 ) ) ; +#1826 = CARTESIAN_POINT ( 'NONE', ( 34.12531627788415300, -30.14615123839650200, 26.85309617458378600 ) ) ; +#1827 = CARTESIAN_POINT ( 'NONE', ( 38.31962979388576700, -29.04360506455508800, 23.17392358324302400 ) ) ; +#1828 = ORIENTED_EDGE ( 'NONE', *, *, #1297, .T. ) ; +#1829 = CARTESIAN_POINT ( 'NONE', ( 24.84990674713926500, -28.77556518705050300, 29.18936127947249300 ) ) ; +#1830 = CARTESIAN_POINT ( 'NONE', ( 20.00816190870302700, -33.35180196542444300, 26.50734624295224200 ) ) ; +#1831 = CARTESIAN_POINT ( 'NONE', ( 7.877313209207743600, -29.69801937170552400, 24.93527457014545200 ) ) ; +#1832 = ORIENTED_EDGE ( 'NONE', *, *, #3139, .T. ) ; +#1833 = CARTESIAN_POINT ( 'NONE', ( 13.93166333328965600, -19.39400564459734300, -26.65641665207093100 ) ) ; +#1834 = CARTESIAN_POINT ( 'NONE', ( 10.87436626786875800, -31.09490435274558700, 26.68568622630313000 ) ) ; +#1835 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -5.000000000000000900, 22.50000000000000400 ) ) ; +#1836 = CARTESIAN_POINT ( 'NONE', ( 44.48776911026348600, 11.02497441041328800, -22.89755382205269600 ) ) ; +#1837 = AXIS2_PLACEMENT_3D ( 'NONE', #4670, #5498, #4765 ) ; +#1838 = CARTESIAN_POINT ( 'NONE', ( 38.72408654581759200, -30.71745043929929500, 22.31235042610929400 ) ) ; +#1839 = EDGE_LOOP ( 'NONE', ( #6625, #6660, #6788, #6949 ) ) ; +#1840 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1841 = DIRECTION ( 'NONE', ( -0.9998119278664175900, 0.01909889591384001200, 0.003367650651352503400 ) ) ; +#1842 = ORIENTED_EDGE ( 'NONE', *, *, #8852, .T. ) ; +#1843 = CARTESIAN_POINT ( 'NONE', ( 36.00968478826441600, -29.65123537954049800, 25.65559145715014800 ) ) ; +#1844 = CARTESIAN_POINT ( 'NONE', ( 9.279072408204724500, -10.86817192529525800, 25.00000000000000400 ) ) ; +#1845 = CARTESIAN_POINT ( 'NONE', ( 32.28927040203723900, -20.75789885281029600, -25.02797681683245300 ) ) ; +#1846 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12532, #12566, #12431, #12403 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001872366595205997800 ), + .UNSPECIFIED. ) ; +#1847 = VERTEX_POINT ( 'NONE', #8661 ) ; +#1848 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#1849 = CARTESIAN_POINT ( 'NONE', ( 23.28286902630853600, -28.74563066253673300, 29.19463954379755700 ) ) ; +#1850 = DIRECTION ( 'NONE', ( -0.9997497390652425600, 0.02203108137215733700, 0.003884674060094832200 ) ) ; +#1851 = CARTESIAN_POINT ( 'NONE', ( 6.731420731394266000, -29.12127102266457600, 23.36500770229192600 ) ) ; +#1852 = CARTESIAN_POINT ( 'NONE', ( 25.90673052723517600, -23.61643445747528600, -27.40094477590119500 ) ) ; +#1853 = CARTESIAN_POINT ( 'NONE', ( 17.59620495674107600, -99.99999999999997200, 21.55134316606141100 ) ) ; +#1854 = CARTESIAN_POINT ( 'NONE', ( 11.43898518984724400, -30.91895499510756200, 27.05055053682809400 ) ) ; +#1855 = ORIENTED_EDGE ( 'NONE', *, *, #1558, .T. ) ; +#1856 = CARTESIAN_POINT ( 'NONE', ( 6.675960642827417000, -19.60098886692212600, 15.07625785418090600 ) ) ; +#1857 = CARTESIAN_POINT ( 'NONE', ( 39.97440020607607600, -26.46667846419868700, 7.773030153450068100 ) ) ; +#1858 = ORIENTED_EDGE ( 'NONE', *, *, #6301, .F. ) ; +#1859 = EDGE_LOOP ( 'NONE', ( #4900, #4572, #5553, #5720 ) ) ; +#1860 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 9.500000000000000000, -24.99999999999999300 ) ) ; +#1861 = CARTESIAN_POINT ( 'NONE', ( 32.25975168718952100, -30.72088314813849400, 27.62629824955366300 ) ) ; +#1862 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#1863 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#1864 = CARTESIAN_POINT ( 'NONE', ( 13.55988369393201900, -30.79141880752927900, 27.88288791936792400 ) ) ; +#1865 = CARTESIAN_POINT ( 'NONE', ( 39.48588863721913400, -29.11477957310140100, 21.71446928580163800 ) ) ; +#1866 = CARTESIAN_POINT ( 'NONE', ( 9.860586666699212800, -31.15458357814772900, 26.03994570552417900 ) ) ; +#1867 = CARTESIAN_POINT ( 'NONE', ( 11.44551983305382400, -14.05610612810378300, -25.18708403369390000 ) ) ; +#1868 = CARTESIAN_POINT ( 'NONE', ( 24.99272566997889900, -27.99011422758325900, 27.51063530140412500 ) ) ; +#1869 = DIRECTION ( 'NONE', ( -0.5543576214285166300, -0.7892513277201260700, 0.2641400561371484200 ) ) ; +#1870 = VERTEX_POINT ( 'NONE', #8548 ) ; +#1871 = CARTESIAN_POINT ( 'NONE', ( 6.048813331362201700, -28.87109216785619700, 21.75704669527094700 ) ) ; +#1872 = CARTESIAN_POINT ( 'NONE', ( 37.48624776685861800, -29.41804583773176400, 24.44130098291939400 ) ) ; +#1873 = VERTEX_POINT ( 'NONE', #8526 ) ; +#1874 = CARTESIAN_POINT ( 'NONE', ( 30.97746369212055100, -12.08519160002694700, -25.36767553903138900 ) ) ; +#1875 = CARTESIAN_POINT ( 'NONE', ( 34.16249209015435200, -30.59445595152941200, 26.85235639993598200 ) ) ; +#1876 = CARTESIAN_POINT ( 'NONE', ( 38.73088872386487900, -28.94718129054381700, 22.43576796058487900 ) ) ; +#1877 = CARTESIAN_POINT ( 'NONE', ( 23.27095163207187400, -30.62972060657771000, 28.86242365258303600 ) ) ; +#1878 = DIRECTION ( 'NONE', ( -0.01900744305030852400, 0.9998193422357306600, 9.251858538542969900E-016 ) ) ; +#1879 = ORIENTED_EDGE ( 'NONE', *, *, #9056, .T. ) ; +#1880 = CARTESIAN_POINT ( 'NONE', ( 8.284165511527087100, -31.03062072377022700, 24.90487734146070100 ) ) ; +#1881 = CARTESIAN_POINT ( 'NONE', ( 15.97789823951686100, -15.54413796894780500, -25.97758110869568800 ) ) ; +#1882 = APPROVAL_PERSON_ORGANIZATION ( #4554, #5788, #9298 ) ; +#1883 = CARTESIAN_POINT ( 'NONE', ( 13.35395141066844400, -30.86424268285456300, 27.80524411440246600 ) ) ; +#1884 = CARTESIAN_POINT ( 'NONE', ( 12.02046556136592600, -19.14854273919007700, -24.86450364855575000 ) ) ; +#1885 = CARTESIAN_POINT ( 'NONE', ( 42.72157559230968400, 11.74708242360304500, -23.60787796154920300 ) ) ; +#1886 = EDGE_CURVE ( 'NONE', #8742, #1415, #2440, .T. ) ; +#1887 = ORIENTED_EDGE ( 'NONE', *, *, #5191, .F. ) ; +#1888 = CARTESIAN_POINT ( 'NONE', ( 39.00130442073717100, -29.27512732291922500, 22.77844030954909700 ) ) ; +#1889 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457639500, -30.82655086342984400, 27.93782961424069500 ) ) ; +#1890 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000900, 17.50000000000000400 ) ) ; +#1891 = CARTESIAN_POINT ( 'NONE', ( 36.16663818805158600, -30.50599518780431700, 25.73041511790243200 ) ) ; +#1892 = CARTESIAN_POINT ( 'NONE', ( 11.63088898974647700, -11.22672436105903800, 25.00000000000000000 ) ) ; +#1893 = CARTESIAN_POINT ( 'NONE', ( 36.46712753079320600, -18.01411976673800200, -23.27312052912913400 ) ) ; +#1894 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999998200, -97.24871113334013700, 12.92967346628274000 ) ) ; +#1895 = CARTESIAN_POINT ( 'NONE', ( 21.71401583611501000, -27.93249662222725500, 27.46301701405933900 ) ) ; +#1896 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11856, #5769, #6813, #733, #7855, #1737, #8868, #2743, #9878, #3748 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001831250783271079900, 0.002746876174906615800, 0.003204688870724382600, 0.003662501566542149900 ), + .UNSPECIFIED. ) ; +#1897 = CARTESIAN_POINT ( 'NONE', ( 1.202780252849185800, -7.601948940085697400, -21.47554080188529800 ) ) ; +#1898 = CIRCLE ( 'NONE', #463, 5.000000000000000000 ) ; +#1899 = CARTESIAN_POINT ( 'NONE', ( 6.656014769004177500, -30.64671903512703500, 23.53298113864147500 ) ) ; +#1900 = CARTESIAN_POINT ( 'NONE', ( 5.610607000509700600, -10.81336014223027900, -24.27626486565521100 ) ) ; +#1901 = EDGE_LOOP ( 'NONE', ( #9661, #12611, #5170, #9193 ) ) ; +#1902 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1903 = CARTESIAN_POINT ( 'NONE', ( 11.43346797661242500, -30.52905640920889100, 27.13190805406732100 ) ) ; +#1904 = CARTESIAN_POINT ( 'NONE', ( 5.527915383567499700, -19.77125613990546800, 12.05957563593116100 ) ) ; +#1905 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, 9.500000000000000000, 0.0000000000000000000 ) ) ; +#1906 = CARTESIAN_POINT ( 'NONE', ( 32.69001770425384700, -10.38557268048685200, -25.05779915594103400 ) ) ; +#1907 = CARTESIAN_POINT ( 'NONE', ( 32.25936501726717900, -30.88796989945063800, 27.59291626843172600 ) ) ; +#1908 = CARTESIAN_POINT ( 'NONE', ( 8.005766447541267500, -35.79492981440785800, 14.38038997509936400 ) ) ; +#1909 = CARTESIAN_POINT ( 'NONE', ( 10.55037755008145700, -100.0000000000000300, 2.274277673961563600 ) ) ; +#1910 = CARTESIAN_POINT ( 'NONE', ( 13.66295946177608800, -30.83073075533630100, 27.90709033117358800 ) ) ; +#1911 = CIRCLE ( 'NONE', #2045, 2.500000000000000900 ) ; +#1912 = CARTESIAN_POINT ( 'NONE', ( 9.762663197013825600, -30.51273277464468600, 26.31587710010123600 ) ) ; +#1913 = ORIENTED_EDGE ( 'NONE', *, *, #1512, .F. ) ; +#1914 = CARTESIAN_POINT ( 'NONE', ( 42.49563003279458700, -10.44154865655177600, -20.92187104639648600 ) ) ; +#1915 = CARTESIAN_POINT ( 'NONE', ( 33.47906540603359800, -93.15154685884033400, 21.51732474367360100 ) ) ; +#1916 = CARTESIAN_POINT ( 'NONE', ( 5.102986162846876000, -29.99261134548572000, 21.62772062354577700 ) ) ; +#1917 = CARTESIAN_POINT ( 'NONE', ( 37.76959943215988600, -30.44138094013027300, 24.53487194791352600 ) ) ; +#1918 = CARTESIAN_POINT ( 'NONE', ( 34.12711126188876400, -31.08313588044839200, 26.69166818248804800 ) ) ; +#1919 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1920 = FACE_OUTER_BOUND ( 'NONE', #6133, .T. ) ; +#1921 = CARTESIAN_POINT ( 'NONE', ( 24.81280616483239500, -30.65917406624146200, 28.85723021296911000 ) ) ; +#1922 = DIRECTION ( 'NONE', ( -0.9997660285782041800, -0.01900642951089532800, -0.01032684551123191200 ) ) ; +#1923 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6931, #847, #1853, #8987, #2866, #9997, #3867, #11009, #4901, #12008, #5928, #12959, #6983, #890, #8016 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 1, 2, 2, 4 ), + ( 0.0000000000000000000, 0.2266853937015557200, 0.4533707874031111500, 0.5667134842538887900, 0.6800561811046663700, 0.7367275295300552700, 0.7933988779554440600, 0.9067415748062223100 ), + .UNSPECIFIED. ) ; +#1924 = VERTEX_POINT ( 'NONE', #8495 ) ; +#1925 = CARTESIAN_POINT ( 'NONE', ( 8.108800433696661300, -30.16262322595163800, 25.26963354799859100 ) ) ; +#1926 = CARTESIAN_POINT ( 'NONE', ( 6.081895850771815900, -18.05583402869483200, -19.90127599156950600 ) ) ; +#1927 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#1928 = CARTESIAN_POINT ( 'NONE', ( 39.00137757195696500, -30.51924079946147500, 22.55600453437325800 ) ) ; +#1929 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1930 = CARTESIAN_POINT ( 'NONE', ( 36.00193062878776800, -31.16883193552213900, 25.37683660253485500 ) ) ; +#1931 = CARTESIAN_POINT ( 'NONE', ( 34.54659626522934700, -15.26490798994005800, -24.95205397816021500 ) ) ; +#1932 = CARTESIAN_POINT ( 'NONE', ( 38.04561909443738400, -23.15452488060242700, -19.69363771316640700 ) ) ; +#1933 = EDGE_CURVE ( 'NONE', #275, #4974, #9126, .T. ) ; +#1934 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.26512727427383700, 8.543711005773323200 ) ) ; +#1935 = CARTESIAN_POINT ( 'NONE', ( 23.28598416387927400, -27.93249662222896400, 27.46301701406323700 ) ) ; +#1936 = CARTESIAN_POINT ( 'NONE', ( 7.929476341157622300, -7.720669053429712200, -29.09507218946683700 ) ) ; +#1937 = CARTESIAN_POINT ( 'NONE', ( 6.656001011065886700, -29.48888947723434800, 23.73643407905634100 ) ) ; +#1938 = FACE_OUTER_BOUND ( 'NONE', #3297, .T. ) ; +#1939 = CARTESIAN_POINT ( 'NONE', ( 26.81194136167767200, -23.32407607445409400, -27.27926816301400900 ) ) ; +#1940 = CARTESIAN_POINT ( 'NONE', ( 32.05501800661949800, -30.78735451359596100, 27.68649267092254400 ) ) ; +#1941 = CARTESIAN_POINT ( 'NONE', ( 11.54726589282369500, -31.02843015492790400, 27.05425672214923000 ) ) ; +#1942 = CARTESIAN_POINT ( 'NONE', ( 5.108525445354625400, -19.89568507934615500, 9.853798105300382900 ) ) ; +#1943 = CARTESIAN_POINT ( 'NONE', ( 42.41824112304816200, -10.43368030133080500, 17.51537635741165400 ) ) ; +#1944 = CARTESIAN_POINT ( 'NONE', ( 33.39857090691764800, -10.24274144926938000, -25.00000000000382600 ) ) ; +#1945 = EDGE_LOOP ( 'NONE', ( #169, #628, #476, #602 ) ) ; +#1946 = CARTESIAN_POINT ( 'NONE', ( 5.034191978246826500, -28.17202531715354000, 7.613581957177763600 ) ) ; +#1947 = CARTESIAN_POINT ( 'NONE', ( 10.03613340820112000, -100.0000000000000300, 1.632021064356439500 ) ) ; +#1948 = CARTESIAN_POINT ( 'NONE', ( 13.66307472533346400, -30.81569364378621500, 27.90977536033461300 ) ) ; +#1949 = CARTESIAN_POINT ( 'NONE', ( 9.860840108125971800, -29.86814341693648000, 26.26636613839123800 ) ) ; +#1950 = CARTESIAN_POINT ( 'NONE', ( 1.132314479736986800, -8.172661399841631500, 18.37092184256949800 ) ) ; +#1951 = AXIS2_PLACEMENT_3D ( 'NONE', #4748, #12829, #3719 ) ; +#1952 = CARTESIAN_POINT ( 'NONE', ( 5.653460749591451100, -30.17568802037646600, 20.32819529289967900 ) ) ; +#1953 = CARTESIAN_POINT ( 'NONE', ( 29.16239543568872600, -97.50831987627843500, 21.75727194542725600 ) ) ; +#1954 = CARTESIAN_POINT ( 'NONE', ( 5.867250610129650200, -28.95607772594724200, 21.81001268260941800 ) ) ; +#1955 = CARTESIAN_POINT ( 'NONE', ( 37.11371847773875000, -29.33688369446683800, 24.66168745160559400 ) ) ; +#1956 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -30.66316004106086300, 28.85652737806402600 ) ) ; +#1957 = ADVANCED_FACE ( 'NONE', ( #7583 ), #8344, .T. ) ; +#1958 = EDGE_CURVE ( 'NONE', #5839, #7792, #12876, .T. ) ; +#1959 = CARTESIAN_POINT ( 'NONE', ( 34.05818370480336200, -30.45325445849978200, 26.91219878734776600 ) ) ; +#1960 = CARTESIAN_POINT ( 'NONE', ( 0.5278685303132660800, -11.05573706062646100, 8.005331014626776200 ) ) ; +#1961 = FACE_BOUND ( 'NONE', #12242, .T. ) ; +#1962 = CARTESIAN_POINT ( 'NONE', ( 21.71713097368570500, -28.74563066253161400, 29.19463954379151400 ) ) ; +#1963 = CARTESIAN_POINT ( 'NONE', ( 19.84540314961828100, -21.17801275585939200, 30.64417503465986000 ) ) ; +#1964 = CARTESIAN_POINT ( 'NONE', ( 8.506767953485903500, -31.15388786470661100, 24.95306988351274700 ) ) ; +#1965 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.819931000048598000, 7.939827542780507800 ) ) ; +#1966 = CARTESIAN_POINT ( 'NONE', ( 24.98146071973758000, -28.77816371652370000, 29.18890308861620400 ) ) ; +#1967 = CARTESIAN_POINT ( 'NONE', ( 37.46416256692101100, -16.92439944314768900, -22.94281600404399800 ) ) ; +#1968 = CARTESIAN_POINT ( 'NONE', ( 38.39088117897572500, -29.08890955295941800, 23.18019824272300200 ) ) ; +#1969 = ORIENTED_EDGE ( 'NONE', *, *, #5098, .T. ) ; +#1970 = VERTEX_POINT ( 'NONE', #8185 ) ; +#1971 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000001800, 12.00000000000000000, -22.50000000000000000 ) ) ; +#1972 = FACE_OUTER_BOUND ( 'NONE', #4927, .T. ) ; +#1973 = CARTESIAN_POINT ( 'NONE', ( 36.07191662506295400, -30.31996351287710900, 25.81904785646872800 ) ) ; +#1974 = EDGE_CURVE ( 'NONE', #10469, #3266, #10083, .T. ) ; +#1975 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000900, 17.50000000000000400 ) ) ; +#1976 = CARTESIAN_POINT ( 'NONE', ( 38.94564394150724200, -20.31005390528493500, -17.21879871127257600 ) ) ; +#1977 = EDGE_CURVE ( 'NONE', #2959, #2052, #824, .T. ) ; +#1978 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -94.90629810833574700, 6.281968897873486700 ) ) ; +#1979 = CARTESIAN_POINT ( 'NONE', ( 21.72904836792221800, -30.62972060656870400, 28.86242365258462400 ) ) ; +#1980 = CARTESIAN_POINT ( 'NONE', ( 18.81765719163706100, -10.00000000000000000, -31.85286835589119600 ) ) ; +#1981 = CARTESIAN_POINT ( 'NONE', ( 6.990579828192759100, -30.92329617603667600, 23.41731769224220000 ) ) ; +#1982 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1983 = CARTESIAN_POINT ( 'NONE', ( 32.05554444939070900, -30.90284906807480800, 27.66113884694535900 ) ) ; +#1984 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -99.99999999999998600, 15.71726571334576200 ) ) ; +#1985 = CARTESIAN_POINT ( 'NONE', ( 11.52906457929162800, -30.65956845758785200, 27.16093966556127600 ) ) ; +#1986 = ORIENTED_EDGE ( 'NONE', *, *, #2625, .T. ) ; +#1987 = DIRECTION ( 'NONE', ( 3.551631410960779700E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1988 = CARTESIAN_POINT ( 'NONE', ( 8.286433303893554500, -12.49999999999997000, -14.67287081414243300 ) ) ; +#1989 = CARTESIAN_POINT ( 'NONE', ( 34.43320664261924700, -10.97336629087237400, -25.00000000000000000 ) ) ; +#1990 = LINE ( 'NONE', #523, #1675 ) ; +#1991 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1992 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 7.000000000000000900, 16.30000000000000100 ) ) ; +#1993 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -40.82281865091663800, 27.18080503950259800 ) ) ; +#1994 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375500, -30.82654731344969800, 27.93780948130441300 ) ) ; +#1995 = DIRECTION ( 'NONE', ( -0.3685279123277925800, -0.9009489668308438000, 0.2290810708062850400 ) ) ; +#1996 = CARTESIAN_POINT ( 'NONE', ( 9.960808103136344000, -30.68275887807210700, 26.38300183892506100 ) ) ; +#1997 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1998 = CARTESIAN_POINT ( 'NONE', ( 36.70691503915184500, -10.27107905351091300, -25.00000000000001400 ) ) ; +#1999 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 8.200000000000013500, 17.50000000000000400 ) ) ; +#2000 = EDGE_LOOP ( 'NONE', ( #12658, #2523, #3323, #3480 ) ) ; +#2001 = CARTESIAN_POINT ( 'NONE', ( 5.636312874333388100, -30.39019446839345300, 21.62040109421271300 ) ) ; +#2002 = CARTESIAN_POINT ( 'NONE', ( 37.46378862328878500, -30.24271867277230900, 24.87128773256436200 ) ) ; +#2003 = ORIENTED_EDGE ( 'NONE', *, *, #8824, .F. ) ; +#2004 = CARTESIAN_POINT ( 'NONE', ( 34.04926379333999600, -30.93459063866884100, 26.80814123205333000 ) ) ; +#2005 = CARTESIAN_POINT ( 'NONE', ( 30.61704205598152800, -20.15317812581777400, 22.10856859344131200 ) ) ; +#2006 = ORIENTED_EDGE ( 'NONE', *, *, #459, .F. ) ; +#2007 = CARTESIAN_POINT ( 'NONE', ( 20.14039537637672300, -27.96255689439414700, 27.45771657700754200 ) ) ; +#2008 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2009 = EDGE_LOOP ( 'NONE', ( #7095, #7163, #7627, #7788, #8542 ) ) ; +#2010 = ORIENTED_EDGE ( 'NONE', *, *, #5442, .T. ) ; +#2011 = CARTESIAN_POINT ( 'NONE', ( 8.279819053672778000, -30.41283215412061100, 25.37207308244186500 ) ) ; +#2012 = CARTESIAN_POINT ( 'NONE', ( 9.604581121742342000, -10.34699588815166900, 24.93881526272396300 ) ) ; +#2013 = CARTESIAN_POINT ( 'NONE', ( 0.5278967194425137100, -11.05576768275427000, 8.011081851838097700 ) ) ; +#2014 = CARTESIAN_POINT ( 'NONE', ( 44.47202897444113000, -11.05585776280280200, -11.50960058371432400 ) ) ; +#2015 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2016 = EDGE_LOOP ( 'NONE', ( #2473, #10606, #2792, #8249, #10912, #456 ) ) ; +#2017 = CARTESIAN_POINT ( 'NONE', ( 39.01066009205216300, -30.19280303521349400, 23.11816242354942800 ) ) ; +#2018 = ORIENTED_EDGE ( 'NONE', *, *, #3946, .T. ) ; +#2019 = CARTESIAN_POINT ( 'NONE', ( 35.93838147000119700, -31.11989293861829600, 25.48313078369943000 ) ) ; +#2020 = CARTESIAN_POINT ( 'NONE', ( 40.87181631893674400, -17.92947436118821600, -14.32052285579690800 ) ) ; +#2021 = ORIENTED_EDGE ( 'NONE', *, *, #3990, .T. ) ; +#2022 = CARTESIAN_POINT ( 'NONE', ( 39.37110533756011000, -92.95357113377386300, 2.611388197520860800 ) ) ; +#2023 = CARTESIAN_POINT ( 'NONE', ( 20.15009325286079200, -28.77556518705050300, 29.18936127947249300 ) ) ; +#2024 = CARTESIAN_POINT ( 'NONE', ( 20.07427704109926500, -33.35320608433635700, 26.50719968128653600 ) ) ; +#2025 = CARTESIAN_POINT ( 'NONE', ( 0.1421806055388400400, -9.999999999999996400, -14.32311909225989100 ) ) ; +#2026 = ADVANCED_FACE ( 'NONE', ( #10263 ), #7351, .T. ) ; +#2027 = CARTESIAN_POINT ( 'NONE', ( 6.538296834991733400, -29.92152834242958900, 23.89072810980847800 ) ) ; +#2028 = CARTESIAN_POINT ( 'NONE', ( 5.272799715337728600, -11.10470069570959600, -23.97676079619285600 ) ) ; +#2029 = CARTESIAN_POINT ( 'NONE', ( 31.74733584613006300, -30.78435874261929000, 27.78795205708336300 ) ) ; +#2030 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 9.500000000000000000, 25.00000000000000400 ) ) ; +#2031 = CARTESIAN_POINT ( 'NONE', ( 11.54820876103000900, -30.32466472599965000, 27.17619735731880200 ) ) ; +#2032 = CARTESIAN_POINT ( 'NONE', ( 26.65181345144134200, -100.0000000000000100, -38.28544755900109900 ) ) ; +#2033 = CARTESIAN_POINT ( 'NONE', ( 15.55843600198873300, -12.50000000000000700, -22.11734993040563100 ) ) ; +#2034 = ORIENTED_EDGE ( 'NONE', *, *, #7085, .T. ) ; +#2035 = EDGE_CURVE ( 'NONE', #5340, #8605, #12585, .T. ) ; +#2036 = ORIENTED_EDGE ( 'NONE', *, *, #7155, .F. ) ; +#2037 = CARTESIAN_POINT ( 'NONE', ( 9.999667120628320300, -12.01299269585281800, 24.33653832659791800 ) ) ; +#2038 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2039 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999992900, -97.04517183358962000, 16.23828164244121900 ) ) ; +#2040 = VERTEX_POINT ( 'NONE', #7544 ) ; +#2041 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344970100, 27.93780948130440200 ) ) ; +#2042 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, -18.70000000000001000 ) ) ; +#2043 = EDGE_CURVE ( 'NONE', #5370, #10127, #11794, .T. ) ; +#2044 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 9.500000000000000000, -1.981438871123700300 ) ) ; +#2045 = AXIS2_PLACEMENT_3D ( 'NONE', #11799, #5714, #12762 ) ; +#2046 = CARTESIAN_POINT ( 'NONE', ( 10.01757684904377000, -30.02574772561412100, 26.40056125063874100 ) ) ; +#2047 = CARTESIAN_POINT ( 'NONE', ( 37.42051596316366600, -100.0000000000000300, -4.448475004225469000 ) ) ; +#2048 = CARTESIAN_POINT ( 'NONE', ( 43.36798939993913400, -9.434444571605327600, 16.76486030204671400 ) ) ; +#2049 = CARTESIAN_POINT ( 'NONE', ( 5.329145980216036800, -29.25855884397431000, 21.82010742993751500 ) ) ; +#2050 = AXIS2_PLACEMENT_3D ( 'NONE', #3507, #2490, #7563 ) ; +#2051 = CARTESIAN_POINT ( 'NONE', ( 37.11453592653859300, -31.10476846193742200, 24.35084985419116800 ) ) ; +#2052 = VERTEX_POINT ( 'NONE', #7229 ) ; +#2053 = CIRCLE ( 'NONE', #625, 5.000000000000000900 ) ; +#2054 = CARTESIAN_POINT ( 'NONE', ( 33.84678345616716700, -30.29345758231075400, 27.00158637439001900 ) ) ; +#2055 = CARTESIAN_POINT ( 'NONE', ( 32.83332354448905500, -27.14145319294438300, 19.78078534969717600 ) ) ; +#2056 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2057 = CARTESIAN_POINT ( 'NONE', ( 8.506199276988589000, -29.49942921612623400, 25.24553953719186300 ) ) ; +#2058 = CARTESIAN_POINT ( 'NONE', ( 46.15273283198659700, -7.681006104485944300, -13.00553780162031500 ) ) ; +#2059 = CARTESIAN_POINT ( 'NONE', ( -7.426918110679304600E-014, -9.999163030796326600, 8.161042355671924000 ) ) ; +#2060 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000066800, -9.998053566166413800, -11.73622957878271900 ) ) ; +#2061 = CARTESIAN_POINT ( 'NONE', ( 37.09997665580754500, -29.59716256594420300, 25.48939590598897800 ) ) ; +#2062 = EDGE_CURVE ( 'NONE', #7107, #963, #12296, .T. ) ; +#2063 = CARTESIAN_POINT ( 'NONE', ( 38.20575667687214100, -29.07010234429834500, 23.34995987436827400 ) ) ; +#2064 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3659, #4718, #12801 ), + ( #6797, #716, #7837 ), + ( #1721, #8854, #2728 ), + ( #9861, #3733, #10868 ), + ( #4763, #11882, #5797 ), + ( #12841, #6845, #761 ), + ( #7879, #1764, #8901 ), + ( #2769, #9903, #3776 ), + ( #10914, #4806, #11924 ), + ( #5841, #12881, #6885 ), + ( #804, #7925, #1801 ), + ( #8942, #2817, #9947 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.008187164175360561400, 0.01152625451359122800, 0.01319579968270656100, 0.01486534485182189300, 0.01820443519005255800, 0.02154352552828322400 ), + ( 0.0000000000000000000, 0.5307183999847175900 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9662616322540715800, 0.9683344096045734000), + ( 1.000000000000000000, 0.9662616322540715800, 0.9683344096045734000), + ( 1.000000000000000000, 0.9662616322540715800, 0.9683344096045734000), + ( 1.000000000000000000, 0.9662616322540715800, 0.9683344096045734000), + ( 1.000000000000000000, 0.9662616322540715800, 0.9683344096045734000), + ( 1.000000000000000000, 0.9662616322540715800, 0.9683344096045734000), + ( 1.000000000000000000, 0.9662616322540700200, 0.9683344096045718400), + ( 1.000000000000000000, 0.9662616322540700200, 0.9683344096045718400), + ( 1.000000000000000000, 0.9662616322540715800, 0.9683344096045734000), + ( 1.000000000000000000, 0.9662616322540715800, 0.9683344096045734000), + ( 1.000000000000000000, 0.9662616322540715800, 0.9683344096045734000), + ( 1.000000000000000000, 0.9662616322540715800, 0.9683344096045734000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2065 = VECTOR ( 'NONE', #7686, 1000.000000000000000 ) ; +#2066 = ORIENTED_EDGE ( 'NONE', *, *, #6792, .T. ) ; +#2067 = DIRECTION ( 'NONE', ( 0.01909913463758415200, 0.9998175948922359800, 1.850371707708594400E-015 ) ) ; +#2068 = CARTESIAN_POINT ( 'NONE', ( 35.84307610782330000, -30.04186376703403700, 25.92078404521887300 ) ) ; +#2069 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -20.21669184904769500, -8.217952235934971500 ) ) ; +#2070 = CARTESIAN_POINT ( 'NONE', ( 39.99939774047712100, -22.35159946274505000, -11.79235367622249700 ) ) ; +#2071 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2072 = CARTESIAN_POINT ( 'NONE', ( 8.376470005285156600, -20.55203307036978400, -21.31342927444648800 ) ) ; +#2073 = CARTESIAN_POINT ( 'NONE', ( 7.179048686225852000, -30.99851587657049400, 23.54034631211963500 ) ) ; +#2074 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2075 = CARTESIAN_POINT ( 'NONE', ( 31.74822713140622500, -30.86245019725585300, 27.77277334800951900 ) ) ; +#2076 = CARTESIAN_POINT ( 'NONE', ( 0.7581492178315079000, -7.659899046636688500, 17.96813079999162400 ) ) ; +#2077 = CARTESIAN_POINT ( 'NONE', ( 11.72872091661424100, -30.75508432265411300, 27.22903150325050700 ) ) ; +#2078 = FACE_OUTER_BOUND ( 'NONE', #8121, .T. ) ; +#2079 = CARTESIAN_POINT ( 'NONE', ( 35.64431205699792600, -100.0000000000000100, -32.32580780564053700 ) ) ; +#2080 = CARTESIAN_POINT ( 'NONE', ( 33.77633524459846400, -12.93524912739737500, 24.48243638373889300 ) ) ; +#2081 = CARTESIAN_POINT ( 'NONE', ( 3.276721011745474600, -9.693645654354504900, 22.49999999999997900 ) ) ; +#2082 = DIRECTION ( 'NONE', ( -0.9998119252976105400, 0.01909902633347766400, 0.003367673647853452200 ) ) ; +#2083 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#2084 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344970100, 27.93780948130441300 ) ) ; +#2085 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2086 = CARTESIAN_POINT ( 'NONE', ( 10.37269362351057600, -30.94232312013710400, 26.49812185551670000 ) ) ; +#2087 = CARTESIAN_POINT ( 'NONE', ( 35.20383782689200600, -12.50000000000001100, 16.69316575776162300 ) ) ; +#2088 = CARTESIAN_POINT ( 'NONE', ( 1.445596739624095600, -8.564593049553945300, -20.86444456112088700 ) ) ; +#2089 = CARTESIAN_POINT ( 'NONE', ( 42.37252810712241300, -9.495533737098989800, 18.62393208677160000 ) ) ; +#2090 = VECTOR ( 'NONE', #11299, 1000.000000000000100 ) ; +#2091 = CARTESIAN_POINT ( 'NONE', ( 6.072606456026475600, -30.59613425238443800, 21.70224657366398100 ) ) ; +#2092 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -5.000000000000000900, -24.99999999999999600 ) ) ; +#2093 = CARTESIAN_POINT ( 'NONE', ( 37.23089953962910000, -29.99318592828075200, 25.00251482764131700 ) ) ; +#2094 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 1, ( + ( #1177, #6221 ), + ( #3019, #2178 ), + ( #9312, #3195 ), + ( #10324, #4203 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 1.000000000000000000), + ( 0.9590174129127586600, 0.9590174129127586600), + ( 0.9590174129127586600, 0.9590174129127586600), + ( 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2095 = ORIENTED_EDGE ( 'NONE', *, *, #12982, .T. ) ; +#2096 = CARTESIAN_POINT ( 'NONE', ( 5.116381136048623500, -28.34694075020339100, 15.54415901025579800 ) ) ; +#2097 = CARTESIAN_POINT ( 'NONE', ( 33.86585558389340600, -30.74438163163966600, 26.96422888939802600 ) ) ; +#2098 = CARTESIAN_POINT ( 'NONE', ( 38.08912883080856900, -28.86879837619343500, 23.39820157190500900 ) ) ; +#2099 = CARTESIAN_POINT ( 'NONE', ( 20.18719383516765500, -30.65917406624146200, 28.85723021296911000 ) ) ; +#2100 = CARTESIAN_POINT ( 'NONE', ( 20.14039441766890400, -33.35446909076587500, 26.50697697917620500 ) ) ; +#2101 = CARTESIAN_POINT ( 'NONE', ( 8.582959518075213600, -30.67419233763294900, 25.48151008056475300 ) ) ; +#2102 = CARTESIAN_POINT ( 'NONE', ( 29.13417089135617700, -7.497989335515306700, -32.61353404113977900 ) ) ; +#2103 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, -8.785783919757550500, 8.713855353550373600 ) ) ; +#2104 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999996400, -8.776201708475516800, -12.42231325711350500 ) ) ; +#2105 = CARTESIAN_POINT ( 'NONE', ( 33.75886731347811300, -32.32726662405718100, 26.78288862935791700 ) ) ; +#2106 = CARTESIAN_POINT ( 'NONE', ( 38.84959724512372500, -29.92450140579488100, 23.42950526705048000 ) ) ; +#2107 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #8051, #7970, #7836 ), + ( #7821, #7794, #7776 ), + ( #7733, #7715, #7687 ), + ( #9974, #9946, #9929 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.07007053679314090300, 0.07508824613630678300 ), + ( 0.0000000000000000000, 0.8217186964344623800 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7593241660421161700, 0.9141839971705312300), + ( 1.000000000000000000, 0.7593241660421161700, 0.9141839971705312300), + ( 1.000000000000000000, 0.7593241660421161700, 0.9141839971705312300), + ( 1.000000000000000000, 0.7593241660421161700, 0.9141839971705312300) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2108 = LINE ( 'NONE', #8627, #4463 ) ; +#2109 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -21.17506671135420100, 30.64523381671439900 ) ) ; +#2110 = CARTESIAN_POINT ( 'NONE', ( 35.84307972292609200, -30.87401391515324500, 25.77406647450114000 ) ) ; +#2111 = CARTESIAN_POINT ( 'NONE', ( 11.24432838011507500, -11.68668549210758200, -25.07859519994274300 ) ) ; +#2112 = CARTESIAN_POINT ( 'NONE', ( 40.00511636516868900, -19.99164518530966100, -11.57486770715758300 ) ) ; +#2113 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000032000, -29.71061054856987800, 21.60901759478812100 ) ) ; +#2114 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2115 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -19.99999999999991500, 8.005331014629272000 ) ) ; +#2116 = CARTESIAN_POINT ( 'NONE', ( 0.5278685303132660800, -11.05573706062646100, 8.005331014626776200 ) ) ; +#2117 = CARTESIAN_POINT ( 'NONE', ( 6.694705702411783800, -30.23752464507421300, 24.06089375580048900 ) ) ; +#2118 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2119 = CARTESIAN_POINT ( 'NONE', ( 31.64520942311283100, -30.76626776268275200, 27.82340139241980000 ) ) ; +#2120 = CARTESIAN_POINT ( 'NONE', ( 1.283859034634714200E-012, -5.632857623982518500, 16.11669318667831200 ) ) ; +#2121 = CARTESIAN_POINT ( 'NONE', ( 11.74181272302558200, -30.39943692739029800, 27.26132105651741400 ) ) ; +#2122 = LINE ( 'NONE', #1278, #9918 ) ; +#2123 = CARTESIAN_POINT ( 'NONE', ( 31.05710569339288800, -15.99677239151184300, 23.94260723020887800 ) ) ; +#2124 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#2125 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 7.000000000000000000, -16.29999999999999000 ) ) ; +#2126 = CARTESIAN_POINT ( 'NONE', ( 5.616026399504314700, -12.28945744579041700, 20.31351088030697500 ) ) ; +#2127 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, -3.189999999999994200 ) ) ; +#2128 = CARTESIAN_POINT ( 'NONE', ( 10.35705442128042900, -30.36411508944139100, 26.62965852438931300 ) ) ; +#2129 = CARTESIAN_POINT ( 'NONE', ( 31.66022420043982400, -100.0000000000000300, 4.680906571415831300 ) ) ; +#2130 = CARTESIAN_POINT ( 'NONE', ( 42.09240836250501200, -9.542884175574222600, 21.76669323169577600 ) ) ; +#2131 = CARTESIAN_POINT ( 'NONE', ( 5.052535555604294800, -29.63350022238396900, 21.86415546753987700 ) ) ; +#2132 = CARTESIAN_POINT ( 'NONE', ( 37.06802903530332600, -30.95600456983338200, 24.65280087211064200 ) ) ; +#2133 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2134 = EDGE_CURVE ( 'NONE', #5893, #9992, #2865, .T. ) ; +#2135 = EDGE_CURVE ( 'NONE', #2052, #10062, #9507, .T. ) ; +#2136 = CARTESIAN_POINT ( 'NONE', ( 33.74268110203540500, -30.24922252111317500, 27.04288185670306900 ) ) ; +#2137 = CARTESIAN_POINT ( 'NONE', ( 37.31285015100207400, -21.71824668978447900, 16.41209550011494000 ) ) ; +#2138 = ORIENTED_EDGE ( 'NONE', *, *, #12497, .F. ) ; +#2139 = ORIENTED_EDGE ( 'NONE', *, *, #1145, .T. ) ; +#2140 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2141 = CARTESIAN_POINT ( 'NONE', ( 8.681226147703464200, -29.75303866654035900, 25.51075170060310200 ) ) ; +#2142 = FACE_OUTER_BOUND ( 'NONE', #12462, .T. ) ; +#2143 = CARTESIAN_POINT ( 'NONE', ( 38.23508955882368800, -7.728320998288587900, -28.21036596403695300 ) ) ; +#2144 = CARTESIAN_POINT ( 'NONE', ( 0.6201688209840406900, -10.53031744281925200, 11.79272902857539900 ) ) ; +#2145 = CARTESIAN_POINT ( 'NONE', ( 44.37654705765083200, -10.21129385468432100, -16.14247005801885500 ) ) ; +#2146 = CARTESIAN_POINT ( 'NONE', ( 27.60673806134831700, -33.23352796647972700, 26.37022722391190000 ) ) ; +#2147 = CARTESIAN_POINT ( 'NONE', ( 38.22903567578896400, -30.89228178962972700, 23.03775701390257100 ) ) ; +#2148 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 12.00000000000000000, -22.49999999999999600 ) ) ; +#2149 = EDGE_LOOP ( 'NONE', ( #1235, #1414, #1572, #1704 ) ) ; +#2150 = CARTESIAN_POINT ( 'NONE', ( 35.68092552251405900, -29.77984049703447800, 25.91997081585008500 ) ) ; +#2151 = CARTESIAN_POINT ( 'NONE', ( 12.72885165742913200, -10.39646951760910900, -25.06990827298294300 ) ) ; +#2152 = ORIENTED_EDGE ( 'NONE', *, *, #11590, .T. ) ; +#2153 = CARTESIAN_POINT ( 'NONE', ( -3.309840000610011000, -10.56296316402165800, -21.43596316075076300 ) ) ; +#2154 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -90.07596123493894400, 15.95758058754439400 ) ) ; +#2155 = CARTESIAN_POINT ( 'NONE', ( 34.40024202106322800, -19.46263916540358000, -24.31651755270814900 ) ) ; +#2156 = ADVANCED_FACE ( 'NONE', ( #9941 ), #2582, .F. ) ; +#2157 = CARTESIAN_POINT ( 'NONE', ( 7.159056111187681800, -29.18442188694182000, 23.87624205192673100 ) ) ; +#2158 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#2159 = CARTESIAN_POINT ( 'NONE', ( 31.64485501994894500, -30.82950856575173000, 27.81260864590347700 ) ) ; +#2160 = CARTESIAN_POINT ( 'NONE', ( 21.71346512545769500, -27.93250714223468400, 27.46301515907685700 ) ) ; +#2161 = CARTESIAN_POINT ( 'NONE', ( 11.83308399153289900, -30.87895315547401500, 27.23905273847787000 ) ) ; +#2162 = CARTESIAN_POINT ( 'NONE', ( 28.41830394937362700, -18.08825275734225700, 23.57382281209097700 ) ) ; +#2163 = CARTESIAN_POINT ( 'NONE', ( 38.94931229836918600, -30.55092192646148400, 21.46123847276535600 ) ) ; +#2164 = ORIENTED_EDGE ( 'NONE', *, *, #6460, .T. ) ; +#2165 = ORIENTED_EDGE ( 'NONE', *, *, #10280, .T. ) ; +#2166 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#2167 = VERTEX_POINT ( 'NONE', #3789 ) ; +#2168 = CARTESIAN_POINT ( 'NONE', ( 13.76586904079734500, -30.82654731345164100, 27.93780948131385600 ) ) ; +#2169 = CARTESIAN_POINT ( 'NONE', ( 14.96848886831334700, -30.65936817455452300, 28.29096948798331500 ) ) ; +#2170 = CARTESIAN_POINT ( 'NONE', ( 10.58906241042589800, -31.10298543416820400, 26.52575314405048000 ) ) ; +#2171 = CARTESIAN_POINT ( 'NONE', ( 25.83336499485023200, -12.50000000000001100, 22.05918254822885100 ) ) ; +#2172 = CARTESIAN_POINT ( 'NONE', ( 39.23231437557843300, -10.63397643803590900, -24.40429583198081800 ) ) ; +#2173 = CARTESIAN_POINT ( 'NONE', ( 37.98616608381635700, -12.65558039925352500, 21.58102521367593600 ) ) ; +#2174 = ORIENTED_EDGE ( 'NONE', *, *, #9125, .F. ) ; +#2175 = CARTESIAN_POINT ( 'NONE', ( 6.103873847016101800, -28.89826264914229300, 22.00196619319745000 ) ) ; +#2176 = CARTESIAN_POINT ( 'NONE', ( 36.73928086266465000, -29.65500803262022700, 25.17680285879855300 ) ) ; +#2177 = ORIENTED_EDGE ( 'NONE', *, *, #5630, .T. ) ; +#2178 = CARTESIAN_POINT ( 'NONE', ( 40.37392192486279200, -27.37112670110126800, 6.613704577171659200 ) ) ; +#2179 = CARTESIAN_POINT ( 'NONE', ( 33.76839462287924900, -30.64907469863638300, 27.02968631386077900 ) ) ; +#2180 = CARTESIAN_POINT ( 'NONE', ( 38.17286607827258400, -26.07468805368575100, 14.40602476364674100 ) ) ; +#2181 = CARTESIAN_POINT ( 'NONE', ( 0.8450799996950028000, -8.389711229384591500, -19.69998625431980000 ) ) ; +#2182 = VERTEX_POINT ( 'NONE', #3833 ) ; +#2183 = CARTESIAN_POINT ( 'NONE', ( 8.766192612345536300, -31.00813867723303800, 25.35791564629090500 ) ) ; +#2184 = CARTESIAN_POINT ( 'NONE', ( 4.030585954603115100, -95.07596123493894400, 7.948371964452274300 ) ) ; +#2185 = CARTESIAN_POINT ( 'NONE', ( 43.87457083097066900, -10.00000000000000000, -18.39180495731408600 ) ) ; +#2186 = CARTESIAN_POINT ( 'NONE', ( 2.831339588951657600E-012, -8.104584399443735900, 14.51400458692809000 ) ) ; +#2187 = CARTESIAN_POINT ( 'NONE', ( 44.99999999998418300, -7.160214100904161300, -19.28392937779421200 ) ) ; +#2188 = CARTESIAN_POINT ( 'NONE', ( 43.00000000000000000, -5.000000000000000900, -24.99999999999999600 ) ) ; +#2189 = ORIENTED_EDGE ( 'NONE', *, *, #5361, .T. ) ; +#2190 = AXIS2_PLACEMENT_3D ( 'NONE', #7720, #1612, #8751 ) ; +#2191 = CARTESIAN_POINT ( 'NONE', ( 38.44234091758632100, -29.64386959782921900, 23.76607843871397200 ) ) ; +#2192 = CARTESIAN_POINT ( 'NONE', ( 35.79805722835273200, -30.60164044836673700, 25.95288928022041500 ) ) ; +#2193 = CARTESIAN_POINT ( 'NONE', ( 10.03220454034422500, -20.32149963875677700, -23.67186603788616800 ) ) ; +#2194 = VERTEX_POINT ( 'NONE', #3805 ) ; +#2195 = CARTESIAN_POINT ( 'NONE', ( 26.09626767868269300, -95.07596123493894400, 16.93034213560351000 ) ) ; +#2196 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -30.65936817474671700, 28.85719598640244900 ) ) ; +#2197 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#2198 = ORIENTED_EDGE ( 'NONE', *, *, #10911, .F. ) ; +#2199 = CARTESIAN_POINT ( 'NONE', ( 6.879287779963178200, -30.55858311869551300, 24.01706540186675200 ) ) ; +#2200 = CARTESIAN_POINT ( 'NONE', ( 31.44018626249164700, -30.78765507123922500, 27.88348535574532900 ) ) ; +#2201 = CARTESIAN_POINT ( 'NONE', ( 19.95405457413379200, -33.17879905958957900, 28.41295234537446400 ) ) ; +#2202 = CARTESIAN_POINT ( 'NONE', ( 11.83308209004202600, -30.53832452749110300, 27.29911565608703900 ) ) ; +#2203 = AXIS2_PLACEMENT_3D ( 'NONE', #8842, #10815, #703 ) ; +#2204 = CARTESIAN_POINT ( 'NONE', ( 25.48654424754815700, -19.13162095519947000, 23.38984884799558700 ) ) ; +#2205 = CARTESIAN_POINT ( 'NONE', ( 39.93249937464856500, -29.49995988267257000, 21.71498420981464900 ) ) ; +#2206 = CARTESIAN_POINT ( 'NONE', ( 9.355687943002077800, -12.49999999999999600, 16.01556209010815500 ) ) ; +#2207 = CARTESIAN_POINT ( 'NONE', ( 44.30096319509987500, -9.999999999999998200, 13.32741038030196500 ) ) ; +#2208 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, -17.49999999999999600 ) ) ; +#2209 = EDGE_CURVE ( 'NONE', #4975, #2266, #1823, .T. ) ; +#2210 = CARTESIAN_POINT ( 'NONE', ( 23.27093538827627500, -30.62972029616819100, 28.86242370731660900 ) ) ; +#2211 = FACE_OUTER_BOUND ( 'NONE', #1771, .T. ) ; +#2212 = CARTESIAN_POINT ( 'NONE', ( 10.54210829246093800, -30.56560979812751800, 26.71318243265955800 ) ) ; +#2213 = CARTESIAN_POINT ( 'NONE', ( 29.68477285433225500, -28.88618851952552200, 28.67212719728205500 ) ) ; +#2214 = VERTEX_POINT ( 'NONE', #5203 ) ; +#2215 = CARTESIAN_POINT ( 'NONE', ( 29.54941352505466100, -30.77347774677275200, 28.36758194924233900 ) ) ; +#2216 = CARTESIAN_POINT ( 'NONE', ( 37.31065475477265600, -9.705594932377829700, 24.21633913201019800 ) ) ; +#2217 = CARTESIAN_POINT ( 'NONE', ( 5.125184034249229200, -29.98763360353237300, 21.85579760718931700 ) ) ; +#2218 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2219 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2220 = CARTESIAN_POINT ( 'NONE', ( 36.87027795869980900, -30.63907565573386200, 25.16175407620941600 ) ) ; +#2221 = CARTESIAN_POINT ( 'NONE', ( 28.40251388249048500, -19.15438205483797800, 22.98932039593345800 ) ) ; +#2222 = CARTESIAN_POINT ( 'NONE', ( 33.74275156043477600, -31.06237869314631100, 26.89966189644808000 ) ) ; +#2223 = CARTESIAN_POINT ( 'NONE', ( 39.99619201152577800, -27.43147028981511300, 9.040364410883963600 ) ) ; +#2224 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #9335, #195, #3217 ), + ( #10350, #4226, #11368 ), + ( #5252, #12349, #6291 ), + ( #242, #7347, #1246 ), + ( #8370, #2248, #9390 ), + ( #3261, #10395, #4273 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( 0.003027449804096151400, 0.004602772195092863500, 0.006178094586089576500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9613603877058498600, 1.000000000000000000), + ( 1.000000000000000000, 0.9661324100979145100, 1.000000000000000000), + ( 1.000000000000000000, 0.9705432898794567100, 1.000000000000000000), + ( 1.000000000000000000, 0.9779238238080995000, 1.000000000000000000), + ( 1.000000000000000000, 0.9809283824493733000, 1.000000000000000000), + ( 1.000000000000000000, 0.9829366249987472300, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2225 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, -17.49999999999999600 ) ) ; +#2226 = FACE_OUTER_BOUND ( 'NONE', #11682, .T. ) ; +#2227 = CARTESIAN_POINT ( 'NONE', ( 26.49362418286894900, -31.29892962639879200, 28.74442404665511900 ) ) ; +#2228 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2229 = CARTESIAN_POINT ( 'NONE', ( 12.13059293583956800, -30.78190937308007200, 27.38857608246535200 ) ) ; +#2230 = CARTESIAN_POINT ( 'NONE', ( 8.673131868422192500, -30.14534153748696700, 25.63885924300686600 ) ) ; +#2231 = CARTESIAN_POINT ( 'NONE', ( 23.43081808544313900, -9.999999999999998200, -31.77779843925436500 ) ) ; +#2232 = EDGE_CURVE ( 'NONE', #4221, #1718, #5144, .T. ) ; +#2233 = CARTESIAN_POINT ( 'NONE', ( 40.86163949413058600, -7.346822827176009900, 25.00000000000000000 ) ) ; +#2234 = CARTESIAN_POINT ( 'NONE', ( 5.376541524922967800, -8.504031224343949100, -24.93380309981834500 ) ) ; +#2235 = EDGE_CURVE ( 'NONE', #2800, #9379, #11987, .T. ) ; +#2236 = CARTESIAN_POINT ( 'NONE', ( 38.28821223119231800, -30.71079235549552100, 23.48943618408999300 ) ) ; +#2237 = LINE ( 'NONE', #2042, #12677 ) ; +#2238 = CARTESIAN_POINT ( 'NONE', ( 35.49031576660323900, -29.76959416172884700, 26.02735816403845000 ) ) ; +#2239 = CARTESIAN_POINT ( 'NONE', ( 11.75656450891293000, -97.48407595461705500, 20.80598184563572400 ) ) ; +#2240 = ORIENTED_EDGE ( 'NONE', *, *, #12325, .F. ) ; +#2241 = CARTESIAN_POINT ( 'NONE', ( 32.10844818510062700, -95.07596123493894400, 16.74121165744397300 ) ) ; +#2242 = CARTESIAN_POINT ( 'NONE', ( 26.49362418286894900, -30.65936817474671700, 28.85719598640244900 ) ) ; +#2243 = PLANE ( 'NONE', #8784 ) ; +#2244 = CARTESIAN_POINT ( 'NONE', ( 29.87786135052407800, -33.12290826665346800, 27.89126696756985900 ) ) ; +#2245 = CARTESIAN_POINT ( 'NONE', ( 7.007606689817108300, -29.50337950474062500, 24.09374192766855300 ) ) ; +#2246 = CARTESIAN_POINT ( 'NONE', ( 5.096079224639269400, -11.21385345471179700, -23.80889899004177900 ) ) ; +#2247 = CARTESIAN_POINT ( 'NONE', ( 31.43940161632996000, -30.81853226623485400, 27.87845618671891000 ) ) ; +#2248 = CARTESIAN_POINT ( 'NONE', ( 43.78680702045596000, -8.307094921664564400, -20.66474937978330600 ) ) ; +#2249 = CARTESIAN_POINT ( 'NONE', ( 12.13750587082059200, -30.96327564138921700, 27.33842354052099600 ) ) ; +#2250 = AXIS2_PLACEMENT_3D ( 'NONE', #1457, #4838, #794 ) ; +#2251 = CARTESIAN_POINT ( 'NONE', ( 44.98225441819342800, -5.616279710245792400, -19.40766061197449600 ) ) ; +#2252 = CARTESIAN_POINT ( 'NONE', ( 39.02443148881299400, -30.53308488050969400, 21.53222213319139300 ) ) ; +#2253 = CARTESIAN_POINT ( 'NONE', ( 4.384053850953434600, -17.94419620827439500, -15.73202647486892600 ) ) ; +#2254 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8331, #2204, #7305, #198, #6248, #12307, #5212, #11329, #4184, #10305, #3178, #9296, #2162, #8290, #1161, #7257, #150, #6204, #12267, #5162, #11287, #4144, #10262, #3129, #9257, #2123, #8243, #1117, #7215, #107, #6160, #12225, #5125, #11239, #4097, #10220, #3088, #9212, #2080, #8194, #1070, #7171, #63 ), + .UNSPECIFIED., .F., .F., + ( 4, 1, 1, 2, 2, 1, 1, 1, 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 1, 1, 2, 2, 1, 1, 1, 1, 1, 2, 2, 1, 4 ), + ( 0.0000000000000000000, 0.1007729330748080400, 0.1133695497091589400, 0.1196678580263342700, 0.1259661663435096000, 0.1511593996122126100, 0.2015458661496191400, 0.2267390994183223800, 0.2393357160526740100, 0.2456340243698502400, 0.2487831785284381200, 0.2519323326870259700, 0.3023187992244363300, 0.3527052657618468000, 0.3653018823961991500, 0.3778984990305515000, 0.4030917322992562100, 0.4534781988366655100, 0.4786714321053702200, 0.4912680487397222400, 0.4975663570568987800, 0.5007155112154869600, 0.5038646653740751500, 0.6046375984488877600, 0.7054105315237005900, 0.7306037647924034100, 0.7432003814267550400, 0.7494986897439311900, 0.7526478439025189300, 0.7557969980611066700, 0.8061834645985075400 ), + .UNSPECIFIED. ) ; +#2255 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.04531648070944500, 16.23785755017207300 ) ) ; +#2256 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #976, #10163, #12170, #6100, #47, #7156, #1057, #8181, #2069, #9198 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( -2.508362016392643500E-005, 0.0006285033525262913400, 0.001282090325216509200, 0.002589264270596945000, 0.005203612161357815800 ), + .UNSPECIFIED. ) ; +#2257 = CARTESIAN_POINT ( 'NONE', ( 42.50672392887636900, -9.331726342378665600, 20.92877966783305500 ) ) ; +#2258 = CARTESIAN_POINT ( 'NONE', ( 10.59142687854110000, -30.06919856541378900, 26.70337670574523500 ) ) ; +#2259 = CIRCLE ( 'NONE', #3514, 5.000000000000000900 ) ; +#2260 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -30.66316004106086300, 28.85652737806402600 ) ) ; +#2261 = CARTESIAN_POINT ( 'NONE', ( 0.1426144731101179300, -6.513698689804182400, -19.49345113893833700 ) ) ; +#2262 = CARTESIAN_POINT ( 'NONE', ( 6.036506851173659700, -28.93774931202156600, 22.04996230439222800 ) ) ; +#2263 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000900, 17.50000000000000400 ) ) ; +#2264 = CARTESIAN_POINT ( 'NONE', ( 36.49344581660417900, -29.49940662287435700, 25.24554848081626400 ) ) ; +#2265 = CARTESIAN_POINT ( 'NONE', ( 11.41057386049262100, -100.0000000000000100, 3.157855994976428900 ) ) ; +#2266 = VERTEX_POINT ( 'NONE', #3307 ) ; +#2267 = CARTESIAN_POINT ( 'NONE', ( 32.49316525474039700, -19.24733841030314000, 21.34223996880711400 ) ) ; +#2268 = AXIS2_PLACEMENT_3D ( 'NONE', #1835, #8973, #2850 ) ; +#2269 = CARTESIAN_POINT ( 'NONE', ( 33.56782259825413200, -30.55940021007614900, 27.12966968579539900 ) ) ; +#2270 = CARTESIAN_POINT ( 'NONE', ( 12.13621161822125700, -30.51705221705060800, 27.42048209357056300 ) ) ; +#2271 = CARTESIAN_POINT ( 'NONE', ( 8.996915851871603900, -31.16688269496189500, 25.37841081694630700 ) ) ; +#2272 = CARTESIAN_POINT ( 'NONE', ( 30.88839853741791000, -20.80077021978448600, -25.72084097664910700 ) ) ; +#2273 = CARTESIAN_POINT ( 'NONE', ( 0.5277033558012154100, -11.05556445613168700, -11.57097012756502300 ) ) ; +#2274 = CARTESIAN_POINT ( 'NONE', ( 39.02926772583167300, -10.60430227396493100, 23.31316267440369900 ) ) ; +#2275 = CARTESIAN_POINT ( 'NONE', ( 38.07721199459368900, -29.26562850577198200, 23.75578170734538100 ) ) ; +#2276 = VECTOR ( 'NONE', #6758, 1000.000000000000000 ) ; +#2277 = CARTESIAN_POINT ( 'NONE', ( 35.61590096395450200, -30.44272343369947700, 26.10416345937519000 ) ) ; +#2278 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -95.07596123493894400, 16.93034213569669800 ) ) ; +#2279 = CARTESIAN_POINT ( 'NONE', ( 34.40698476102623000, -94.71799171675239400, 16.81949576096668200 ) ) ; +#2280 = CARTESIAN_POINT ( 'NONE', ( 29.92830783128165000, -31.83008028243264000, 20.32333392404184400 ) ) ; +#2281 = ADVANCED_FACE ( 'NONE', ( #12288 ), #5309, .T. ) ; +#2282 = CARTESIAN_POINT ( 'NONE', ( 7.221946407927263500, -30.91268422395094400, 23.84655441514329500 ) ) ; +#2283 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2284 = CARTESIAN_POINT ( 'NONE', ( 31.44022410977379100, -30.84523829976039600, 27.87330973806821200 ) ) ; +#2285 = CARTESIAN_POINT ( 'NONE', ( 18.56662027021597800, -33.14936076026620500, 28.41536337338425300 ) ) ; +#2286 = EDGE_CURVE ( 'NONE', #8372, #7458, #9632, .T. ) ; +#2287 = VERTEX_POINT ( 'NONE', #9678 ) ; +#2288 = ORIENTED_EDGE ( 'NONE', *, *, #2904, .T. ) ; +#2289 = CARTESIAN_POINT ( 'NONE', ( 37.72261814856534600, -12.64548426339927700, 21.80945612268486800 ) ) ; +#2290 = CARTESIAN_POINT ( 'NONE', ( 39.46938813500052800, -29.13134143281618200, 21.84290019101148400 ) ) ; +#2291 = LINE ( 'NONE', #246, #13019 ) ; +#2292 = AXIS2_PLACEMENT_3D ( 'NONE', #11321, #5201, #12301 ) ; +#2293 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669240300, -0.9848077530122092400 ) ) ; +#2294 = CARTESIAN_POINT ( 'NONE', ( 44.93845067422913100, -13.38034941310287200, -24.93511994749305300 ) ) ; +#2295 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -30.66316004086981600, 28.85652737809770900 ) ) ; +#2296 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3444, #470, #7575, #1468, #8610, #2460, #9610, #3484, #10616, #4488, #11643, #5538, #12600, #6569, #510, #7618, #1504, #8646, #2507, #9650, #3522, #10656, #4534, #11677 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002463585774359064200, 0.003695378661538593500, 0.004927171548718123200, 0.007390757323077181700, 0.008622550210256711000, 0.009854343097436241200, 0.01231792887179528800, 0.01354972175897480200, 0.01478151464615431500, 0.01724510042051332800, 0.01970868619487234400 ), + .UNSPECIFIED. ) ; +#2297 = CARTESIAN_POINT ( 'NONE', ( 5.358001648764324700, -30.28418555501302500, 21.50788084569215600 ) ) ; +#2298 = ORIENTED_EDGE ( 'NONE', *, *, #6742, .T. ) ; +#2299 = CARTESIAN_POINT ( 'NONE', ( 5.641661547598617200, -30.40397247683838700, 21.94362916066149100 ) ) ; +#2300 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -97.51638471114853200, 22.06850012136331100 ) ) ; +#2301 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999997900, -5.000000000000134100, -19.35342349036124400 ) ) ; +#2302 = CARTESIAN_POINT ( 'NONE', ( 36.71987950045531300, -30.41279596411459000, 25.37203733873119700 ) ) ; +#2303 = LINE ( 'NONE', #1469, #10105 ) ; +#2304 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000001400, -94.17761894188298300, 15.25983559105857700 ) ) ; +#2305 = CARTESIAN_POINT ( 'NONE', ( 35.64825661464542600, -19.38848434245727500, 18.84096108244321900 ) ) ; +#2306 = EDGE_CURVE ( 'NONE', #2631, #1233, #9107, .T. ) ; +#2307 = CARTESIAN_POINT ( 'NONE', ( 33.55707726039473500, -30.96504126595186800, 27.03362526192958600 ) ) ; +#2308 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999998600, -96.63409408015618900, 6.393917841143077000 ) ) ; +#2309 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2310 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2311 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999489100, -5.146500153892674200, -19.36605850008134400 ) ) ; +#2312 = CARTESIAN_POINT ( 'NONE', ( 12.33516001873639600, -30.88412194230674100, 27.44230632616409000 ) ) ; +#2313 = VERTEX_POINT ( 'NONE', #2477 ) ; +#2314 = CARTESIAN_POINT ( 'NONE', ( 8.831815942194197100, -30.40622592026995400, 25.74987518977695400 ) ) ; +#2315 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -31.29513776008465000, 28.74509265499354200 ) ) ; +#2316 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, -8.811396030254057300, -11.95235772913551200 ) ) ; +#2317 = CARTESIAN_POINT ( 'NONE', ( 34.21263802870611700, -10.46874147489814500, 25.00000000000000000 ) ) ; +#2318 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2319 = ORIENTED_EDGE ( 'NONE', *, *, #10610, .T. ) ; +#2320 = CARTESIAN_POINT ( 'NONE', ( 38.44805956295309100, -30.33484396869189900, 23.80964780871876800 ) ) ; +#2321 = CARTESIAN_POINT ( 'NONE', ( 0.1065395397838999900, -95.07596123493894400, -1.866925240466775800 ) ) ; +#2322 = EDGE_LOOP ( 'NONE', ( #349, #430, #441, #480 ) ) ; +#2323 = CARTESIAN_POINT ( 'NONE', ( 35.49628643295102400, -31.14836095331958500, 25.79354390253344700 ) ) ; +#2324 = CARTESIAN_POINT ( 'NONE', ( 6.507078388738327700, -30.80173203870498700, 21.84946643694965500 ) ) ; +#2325 = ORIENTED_EDGE ( 'NONE', *, *, #12002, .T. ) ; +#2326 = ORIENTED_EDGE ( 'NONE', *, *, #7325, .F. ) ; +#2327 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2328 = CARTESIAN_POINT ( 'NONE', ( 40.00008036490039800, -19.94033204978867200, 9.062596576393044500 ) ) ; +#2329 = CARTESIAN_POINT ( 'NONE', ( 32.84543924297685200, -38.24630951876409300, 17.78032805003585200 ) ) ; +#2330 = CARTESIAN_POINT ( 'NONE', ( 6.904014459166968500, -29.96118158906693200, 24.29358557741304700 ) ) ; +#2331 = ORIENTED_EDGE ( 'NONE', *, *, #9303, .F. ) ; +#2332 = CARTESIAN_POINT ( 'NONE', ( 41.04969311552490300, -17.89895776078271400, -11.49237794985017100 ) ) ; +#2333 = CARTESIAN_POINT ( 'NONE', ( 31.33675196861052100, -30.81915651550508900, 27.90920905530423100 ) ) ; +#2334 = CARTESIAN_POINT ( 'NONE', ( 13.68573799750739000, -32.82321213003489600, 25.60542936019977800 ) ) ; +#2335 = CARTESIAN_POINT ( 'NONE', ( 39.46941209197231600, -30.33487364283375600, 21.63043255873716600 ) ) ; +#2336 = ORIENTED_EDGE ( 'NONE', *, *, #11077, .F. ) ; +#2337 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2338 = ORIENTED_EDGE ( 'NONE', *, *, #7155, .T. ) ; +#2339 = CARTESIAN_POINT ( 'NONE', ( 17.52797750999220500, -93.17110499673349000, 22.75064472591960700 ) ) ; +#2340 = CARTESIAN_POINT ( 'NONE', ( 7.910446972845011100, -100.0000000000000100, -28.90004843828753400 ) ) ; +#2341 = CARTESIAN_POINT ( 'NONE', ( 0.6189479162416793300, -7.423666867544927300, 17.80797480235608900 ) ) ; +#2342 = CARTESIAN_POINT ( 'NONE', ( 20.00735423513291500, -27.96523496585093200, 27.45710953202296500 ) ) ; +#2343 = CARTESIAN_POINT ( 'NONE', ( 5.641609103755165200, -29.17313207129939600, 22.15832000881127000 ) ) ; +#2344 = CARTESIAN_POINT ( 'NONE', ( 26.20719608933879400, -97.51638471114898700, 22.06850012136324700 ) ) ; +#2345 = CARTESIAN_POINT ( 'NONE', ( 44.99596308441017100, -5.295683707013624000, -19.37915001643663300 ) ) ; +#2346 = CARTESIAN_POINT ( 'NONE', ( 36.49289862197706200, -31.15386136874936800, 24.95312060019402600 ) ) ; +#2347 = EDGE_LOOP ( 'NONE', ( #4729, #4845, #4859, #4885 ) ) ; +#2348 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -94.98909182254421100, 13.36365932916995400 ) ) ; +#2349 = EDGE_LOOP ( 'NONE', ( #6691, #7010, #7820, #8477 ) ) ; +#2350 = CARTESIAN_POINT ( 'NONE', ( 37.58360134343911300, -19.52742337774141700, 16.37909830764406700 ) ) ; +#2351 = ADVANCED_FACE ( 'NONE', ( #2142 ), #2243, .F. ) ; +#2352 = ORIENTED_EDGE ( 'NONE', *, *, #8124, .T. ) ; +#2353 = CARTESIAN_POINT ( 'NONE', ( 33.45909262921789200, -30.40884784378009800, 27.17818014234715600 ) ) ; +#2354 = DIRECTION ( 'NONE', ( -0.7199817086279121100, 0.0000000000000000000, -0.6939930397642559700 ) ) ; +#2355 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9848077530122092400, 0.1736481776669239200 ) ) ; +#2356 = CARTESIAN_POINT ( 'NONE', ( 32.09863200989554600, -9.562556682370415100, -30.00000000000000000 ) ) ; +#2357 = CARTESIAN_POINT ( 'NONE', ( 44.97956725264734200, -5.590427196843347000, -19.40562524802105300 ) ) ; +#2358 = CARTESIAN_POINT ( 'NONE', ( 12.33382469521080800, -30.65690722695312700, 27.48655418192402800 ) ) ; +#2359 = CARTESIAN_POINT ( 'NONE', ( 8.997339034796372200, -29.63016781707184700, 25.64877252164600600 ) ) ; +#2360 = CARTESIAN_POINT ( 'NONE', ( 21.71046654543479800, -27.93256442298460100, 27.46300505893086800 ) ) ; +#2361 = ORIENTED_EDGE ( 'NONE', *, *, #7188, .F. ) ; +#2362 = LINE ( 'NONE', #12139, #9849 ) ; +#2363 = CARTESIAN_POINT ( 'NONE', ( 37.82181408463950600, -29.16219909702884300, 23.86525859714270600 ) ) ; +#2364 = FACE_OUTER_BOUND ( 'NONE', #8928, .T. ) ; +#2365 = CARTESIAN_POINT ( 'NONE', ( 35.49939106272741900, -30.23031375687404000, 26.16349684890873200 ) ) ; +#2366 = CARTESIAN_POINT ( 'NONE', ( 29.41560883442166800, -95.07596123493893000, 16.47921297458516700 ) ) ; +#2367 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2368 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000004400, -100.0000000000000300, -26.47095103470434900 ) ) ; +#2369 = CARTESIAN_POINT ( 'NONE', ( 38.60374529170554300, -30.81666262191279400, 22.21904940089482800 ) ) ; +#2370 = CARTESIAN_POINT ( 'NONE', ( 7.349163871949041700, -31.02941265893376200, 23.75012492837254600 ) ) ; +#2371 = CARTESIAN_POINT ( 'NONE', ( 39.97995308532139100, -22.30177160533261800, -11.13730835765191300 ) ) ; +#2372 = CARTESIAN_POINT ( 'NONE', ( 31.33711760530615100, -30.83481620299284700, 27.90634133063100100 ) ) ; +#2373 = CARTESIAN_POINT ( 'NONE', ( 7.361574050457014600, -29.42359637960598200, 25.16227031977869900 ) ) ; +#2374 = LINE ( 'NONE', #571, #2065 ) ; +#2375 = CARTESIAN_POINT ( 'NONE', ( 38.98102579473697200, -28.93163812370150000, 21.99554983569426600 ) ) ; +#2376 = ORIENTED_EDGE ( 'NONE', *, *, #11331, .T. ) ; +#2377 = CARTESIAN_POINT ( 'NONE', ( 44.39169108775602300, -10.33378554638207600, -15.85061749272490900 ) ) ; +#2378 = CARTESIAN_POINT ( 'NONE', ( 11.41057386049262100, -12.49999999999999600, 18.58646680696653100 ) ) ; +#2379 = CARTESIAN_POINT ( 'NONE', ( 20.12479190845338200, -31.29794767388276700, 28.74459719137746600 ) ) ; +#2380 = CARTESIAN_POINT ( 'NONE', ( 11.73602682857686800, -97.48391278515380500, 20.79952273398799900 ) ) ; +#2381 = EDGE_CURVE ( 'NONE', #10062, #7458, #7259, .T. ) ; +#2382 = CARTESIAN_POINT ( 'NONE', ( 26.11698509028201800, -21.62876789580372300, -27.05046553242651800 ) ) ; +#2383 = CARTESIAN_POINT ( 'NONE', ( 12.67787394747550600, -14.68642358401487700, 24.17365707910974500 ) ) ; +#2384 = CYLINDRICAL_SURFACE ( 'NONE', #1951, 3.189999999999995100 ) ; +#2385 = CARTESIAN_POINT ( 'NONE', ( 6.136301963303630200, -30.64967951964083100, 22.01965851238467700 ) ) ; +#2386 = CARTESIAN_POINT ( 'NONE', ( 30.96417652636322200, -97.49979229965107700, 21.41821362754264200 ) ) ; +#2387 = CARTESIAN_POINT ( 'NONE', ( 44.96721526978085800, -5.737360172778389600, -19.41910856359166000 ) ) ; +#2388 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #10325, #6206, ( #398 ) ) ; +#2389 = CARTESIAN_POINT ( 'NONE', ( 36.43113911367198900, -30.23163657385432000, 25.57859712322043700 ) ) ; +#2390 = CARTESIAN_POINT ( 'NONE', ( 39.00311012911460300, -19.68865936433784800, 13.52234506509175400 ) ) ; +#2391 = CARTESIAN_POINT ( 'NONE', ( 33.46884228861159000, -30.80274329885652300, 27.13109453834153200 ) ) ; +#2392 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.39527733499616600, -5.641544558944380200 ) ) ; +#2393 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2394 = CARTESIAN_POINT ( 'NONE', ( 44.91720182749408300, -6.176789098558741900, -19.46033976298205200 ) ) ; +#2395 = CARTESIAN_POINT ( 'NONE', ( 12.74077494861473500, -30.91852490334297000, 27.58469371446557600 ) ) ; +#2396 = FACE_OUTER_BOUND ( 'NONE', #10650, .T. ) ; +#2397 = CARTESIAN_POINT ( 'NONE', ( 8.930821077558070100, -30.60852030750690400, 25.76376184982979500 ) ) ; +#2398 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.57596123371020300, 12.92977595461369400 ) ) ; +#2399 = CARTESIAN_POINT ( 'NONE', ( 29.34752224758851500, -28.08124121815428300, 26.96588792517640300 ) ) ; +#2400 = ORIENTED_EDGE ( 'NONE', *, *, #12434, .F. ) ; +#2401 = CARTESIAN_POINT ( 'NONE', ( 38.30987172320372700, -30.10017577731866800, 24.08925563204261500 ) ) ; +#2402 = FACE_OUTER_BOUND ( 'NONE', #6644, .T. ) ; +#2403 = CARTESIAN_POINT ( 'NONE', ( 35.46821288227808100, -30.93425040566476600, 25.99006025905972800 ) ) ; +#2404 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2405 = CARTESIAN_POINT ( 'NONE', ( 44.86624358007888000, -6.469450105725546700, -19.48903499067764100 ) ) ; +#2406 = CARTESIAN_POINT ( 'NONE', ( 36.64158501001949000, -31.22753124919109900, 15.77685882675633900 ) ) ; +#2407 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #128, #5778, #98, #82, #52, #37, #8, #256, #877, #6968, #5918, #12950, #11997, #4887, #11000, #3857, #9985 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 1, 2, 4 ), + ( 0.006063970482774817600, 0.007471797730275528900, 0.008879624977776241100, 0.01169527947277766700, 0.01451093396777909700, 0.01591876121527981100, 0.01662267483903016500, 0.01697463165090533400, 0.01732658846278050500 ), + .UNSPECIFIED. ) ; +#2408 = CARTESIAN_POINT ( 'NONE', ( 6.893030813334272400, -30.23052291203185900, 24.29425267395694700 ) ) ; +#2409 = CARTESIAN_POINT ( 'NONE', ( 39.65110326765552200, -20.48720913754355900, -8.250762736441972200 ) ) ; +#2410 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983000, 27.93782961424065500 ) ) ; +#2411 = CIRCLE ( 'NONE', #3949, 2.499999999999999600 ) ; +#2412 = CARTESIAN_POINT ( 'NONE', ( 39.89483372288655300, -29.97753417729550700, 21.80377704464633800 ) ) ; +#2413 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -10.00000000000000400, 25.00000000000000000 ) ) ; +#2414 = CARTESIAN_POINT ( 'NONE', ( 11.41057386049262100, -100.0000000000000300, 3.157855994976423600 ) ) ; +#2415 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 9.723952627011014400, -19.19887574203255200 ) ) ; +#2416 = CARTESIAN_POINT ( 'NONE', ( 9.823134476481850900, -94.72950869662135200, 16.42489741236393300 ) ) ; +#2417 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000002100, -5.249288970143250100, 15.78518948590612300 ) ) ; +#2418 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2419 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -89.20772034660431900, 11.03354182248334700 ) ) ; +#2420 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2421 = CARTESIAN_POINT ( 'NONE', ( 15.16633222125350500, -17.08921197060414700, 23.74998065762111900 ) ) ; +#2422 = CARTESIAN_POINT ( 'NONE', ( 5.256158850034950100, -29.57833219914763800, 22.19291957383802200 ) ) ; +#2423 = LINE ( 'NONE', #8655, #12855 ) ; +#2424 = CARTESIAN_POINT ( 'NONE', ( 31.55257542530072400, -97.49622431010483600, 21.28016276984890000 ) ) ; +#2425 = CARTESIAN_POINT ( 'NONE', ( 39.89336454583274600, -19.88066710005495000, 10.11980897223572700 ) ) ; +#2426 = CARTESIAN_POINT ( 'NONE', ( 39.79395975078829700, -19.85643805463339700, 10.54927002951737300 ) ) ; +#2427 = CARTESIAN_POINT ( 'NONE', ( 33.25625670656956600, -30.37580940485838000, 27.26098530090618200 ) ) ; +#2428 = CARTESIAN_POINT ( 'NONE', ( 44.65860349294976600, -7.328698720380219600, -19.57710114639698100 ) ) ; +#2429 = CARTESIAN_POINT ( 'NONE', ( 12.73987505261860100, -30.75778747057001500, 27.62050860629205600 ) ) ; +#2430 = CARTESIAN_POINT ( 'NONE', ( 9.038118180992411200, -29.78440617714582200, 25.75247506027861600 ) ) ; +#2431 = CYLINDRICAL_SURFACE ( 'NONE', #7635, 3.189999999999995100 ) ; +#2432 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2433 = CARTESIAN_POINT ( 'NONE', ( 35.41604168422890100, -31.01843651754556300, 26.21734766409666100 ) ) ; +#2434 = CARTESIAN_POINT ( 'NONE', ( 35.39562161323283400, -10.34590791564407500, 24.93900710163134000 ) ) ; +#2435 = CARTESIAN_POINT ( 'NONE', ( 37.82294188867548000, -30.99661664125590800, 23.54268390296421000 ) ) ; +#2436 = ORIENTED_EDGE ( 'NONE', *, *, #5784, .T. ) ; +#2437 = CARTESIAN_POINT ( 'NONE', ( 35.16531272134705000, -29.98263620354300900, 26.29009906411345600 ) ) ; +#2438 = CARTESIAN_POINT ( 'NONE', ( 42.49999999999999300, 9.500000000000000000, 22.50000000000000700 ) ) ; +#2439 = EDGE_CURVE ( 'NONE', #4974, #7324, #1511, .T. ) ; +#2440 = CIRCLE ( 'NONE', #9337, 2.500000000000002700 ) ; +#2441 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2442 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -100.0000000000000900, 21.63057173623875000 ) ) ; +#2443 = CARTESIAN_POINT ( 'NONE', ( 38.85502347133183300, -32.95551158045955700, 11.57644568113736800 ) ) ; +#2444 = CARTESIAN_POINT ( 'NONE', ( 7.348107049547298400, -29.20502217677064400, 24.07275494659131700 ) ) ; +#2445 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, -5.000000000000000900, 22.50000000000000400 ) ) ; +#2446 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983000, 27.93782961424065500 ) ) ; +#2447 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12598, #7616, #2504, #9647, #3520, #10654 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.0005163841122540165700, 0.001032768224508033100 ), + .UNSPECIFIED. ) ; +#2448 = CARTESIAN_POINT ( 'NONE', ( 24.93760561181283500, -31.29661376537492500, 28.74483239543720000 ) ) ; +#2449 = EDGE_CURVE ( 'NONE', #9379, #3014, #5569, .T. ) ; +#2450 = AXIS2_PLACEMENT_3D ( 'NONE', #6616, #10696, #4578 ) ; +#2451 = CARTESIAN_POINT ( 'NONE', ( 38.87845345963243200, -28.90437002066096300, 22.05800830555849100 ) ) ; +#2452 = ORIENTED_EDGE ( 'NONE', *, *, #9818, .T. ) ; +#2453 = AXIS2_PLACEMENT_3D ( 'NONE', #1676, #8814, #2681 ) ; +#2454 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999997900, -5.000000000000134100, -19.35342349036124400 ) ) ; +#2455 = CARTESIAN_POINT ( 'NONE', ( 11.71221654547091100, -100.0000000000000300, 3.438986161326951700 ) ) ; +#2456 = ORIENTED_EDGE ( 'NONE', *, *, #8808, .T. ) ; +#2457 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -90.07596123493897300, -4.350951650170485700 ) ) ; +#2458 = CARTESIAN_POINT ( 'NONE', ( 5.947028985637151900, -93.11097320101097800, 18.95414348968906600 ) ) ; +#2459 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -5.000000000000000900, 16.06938735382976400 ) ) ; +#2460 = CARTESIAN_POINT ( 'NONE', ( 36.85584641722978500, -12.49999999999999600, -14.26478503736517400 ) ) ; +#2461 = CARTESIAN_POINT ( 'NONE', ( 36.65617149004653200, -18.01237507300842100, -23.06837513076508700 ) ) ; +#2462 = CARTESIAN_POINT ( 'NONE', ( 18.17629133964114600, -18.83002889336014000, 23.44302766566536200 ) ) ; +#2463 = CARTESIAN_POINT ( 'NONE', ( 6.353505966356502600, -30.75416420753312300, 22.30742832438297900 ) ) ; +#2464 = CARTESIAN_POINT ( 'NONE', ( 33.29092676920822000, -97.48421946027038100, 20.81157403906823000 ) ) ; +#2465 = ORIENTED_EDGE ( 'NONE', *, *, #10850, .F. ) ; +#2466 = CARTESIAN_POINT ( 'NONE', ( 10.83803217854930900, -30.71202742357803200, 26.82961348673885400 ) ) ; +#2467 = ORIENTED_EDGE ( 'NONE', *, *, #4674, .F. ) ; +#2468 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, -17.49999999999999600 ) ) ; +#2469 = ADVANCED_FACE ( 'NONE', ( #4186 ), #3859, .F. ) ; +#2470 = EDGE_CURVE ( 'NONE', #3589, #330, #6923, .T. ) ; +#2471 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2472 = CARTESIAN_POINT ( 'NONE', ( 33.27169149809744700, -30.71649153515667100, 27.23694130378651900 ) ) ; +#2473 = ORIENTED_EDGE ( 'NONE', *, *, #12561, .F. ) ; +#2474 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999998200, -12.49999999999999600, 9.327783369942693500 ) ) ; +#2475 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2476 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -97.40649683660852500, 22.08787631849741800 ) ) ; +#2477 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, 9.500000000000000000, -23.00000000000000000 ) ) ; +#2478 = CARTESIAN_POINT ( 'NONE', ( 12.74083688444080800, -30.61509613181161500, 27.63778799294994600 ) ) ; +#2479 = ORIENTED_EDGE ( 'NONE', *, *, #12880, .T. ) ; +#2480 = CARTESIAN_POINT ( 'NONE', ( 9.170741431742934300, -30.92917694477541000, 25.74304804277365800 ) ) ; +#2481 = CARTESIAN_POINT ( 'NONE', ( 34.65379116379333600, -19.88731059613755300, -24.03903893481609400 ) ) ; +#2482 = CARTESIAN_POINT ( 'NONE', ( 38.62103487499684500, -29.35200639260545000, 24.48244197127332100 ) ) ; +#2483 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12620, #6815, #8871, #2745, #9880, #3750, #10883, #4782, #11899, #5814, #12858, #6864, #779, #7898, #1779, #8920, #2788, #9921, #3794, #10933, #4824, #11943, #5858, #12897 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.1249999999999997500, 0.1874999999999996100, 0.2499999999999995000, 0.3749999999999996700, 0.4374999999999994400, 0.4999999999999992200, 0.6249999999999994400, 0.6874999999999995600, 0.7499999999999995600, 0.8749999999999997800, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#2484 = ORIENTED_EDGE ( 'NONE', *, *, #11356, .T. ) ; +#2485 = CARTESIAN_POINT ( 'NONE', ( 38.15498806381385300, -29.81592462657499400, 24.17781831733835700 ) ) ; +#2486 = EDGE_CURVE ( 'NONE', #8780, #1531, #11981, .T. ) ; +#2487 = CARTESIAN_POINT ( 'NONE', ( 35.23156728628701000, -30.67026032528916300, 26.27910451018736300 ) ) ; +#2488 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2489 = ORIENTED_EDGE ( 'NONE', *, *, #12478, .T. ) ; +#2490 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2491 = CARTESIAN_POINT ( 'NONE', ( 26.82375734990285900, -100.0000000000000900, 21.63057173623875300 ) ) ; +#2492 = CARTESIAN_POINT ( 'NONE', ( 39.15592812320849000, -19.70672053471689000, 13.20199484367852300 ) ) ; +#2493 = CARTESIAN_POINT ( 'NONE', ( 39.99493893041401500, -27.63065482122264500, 9.396694007203183900 ) ) ; +#2494 = ORIENTED_EDGE ( 'NONE', *, *, #6041, .T. ) ; +#2495 = CARTESIAN_POINT ( 'NONE', ( 7.119425064155314500, -30.53103317811496400, 24.34759306229008000 ) ) ; +#2496 = CARTESIAN_POINT ( 'NONE', ( 20.06133793030467400, -30.66176281334875100, 28.85677374700786000 ) ) ; +#2497 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669238400, 0.9848077530122091300 ) ) ; +#2498 = CARTESIAN_POINT ( 'NONE', ( 39.92744540107434400, -29.64217863013949000, 21.91682118285015000 ) ) ; +#2499 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2500 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -2.500000000000016400, 25.00105000000004200 ) ) ; +#2501 = VERTEX_POINT ( 'NONE', #1566 ) ; +#2502 = DATE_AND_TIME ( #5202, #7958 ) ; +#2503 = CARTESIAN_POINT ( 'NONE', ( 12.12194414080186400, -95.07596123493894400, 15.43705539584913400 ) ) ; +#2504 = CARTESIAN_POINT ( 'NONE', ( 2.247566190564113800, -9.144925897370667300, -23.33785701257484000 ) ) ; +#2505 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -95.07596123493894400, 16.93034213569669800 ) ) ; +#2506 = ORIENTED_EDGE ( 'NONE', *, *, #12634, .T. ) ; +#2507 = CARTESIAN_POINT ( 'NONE', ( 30.20895884858048300, -12.49999999999999300, -21.79018409278032200 ) ) ; +#2508 = CARTESIAN_POINT ( 'NONE', ( 34.78625685006684200, -31.13890494127032900, 26.27674320744640500 ) ) ; +#2509 = CARTESIAN_POINT ( 'NONE', ( 34.23293545921353600, -19.59179847849629400, -24.54917338901213600 ) ) ; +#2510 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807600E-016 ) ) ; +#2511 = CARTESIAN_POINT ( 'NONE', ( 5.416315372814311000, -29.98030326686757300, 22.44440836620523400 ) ) ; +#2512 = CARTESIAN_POINT ( 'NONE', ( 34.42107555992801300, -97.47441179282178300, 20.42563285959299800 ) ) ; +#2513 = CARTESIAN_POINT ( 'NONE', ( 10.86959321002002100, -30.18131843838140700, 26.85682176026612600 ) ) ; +#2514 = CARTESIAN_POINT ( 'NONE', ( 0.5534090305963413900, -7.345789485088789500, -21.13065858038137900 ) ) ; +#2515 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 1, ( + ( #3255, #3154 ), + ( #3039, #3024 ), + ( #2994, #2977 ), + ( #2948, #2931 ), + ( #2860, #2845 ), + ( #2816, #2797 ), + ( #2768, #2752 ), + ( #2727, #2711 ), + ( #2683, #2667 ), + ( #2652, #2618 ), + ( #2579, #2563 ), + ( #2552, #2535 ), + ( #2521, #2491 ), + ( #2476, #2442 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 2, 2 ), + ( 0.6684358329217819900, 0.6874999999999993300, 0.7499999999999993300, 0.8124999999999994400, 0.8437499999999994400, 0.8749999999999993300, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#2516 = CARTESIAN_POINT ( 'NONE', ( 38.94931178141813900, -28.87043262030299200, 21.75755471858347400 ) ) ; +#2517 = CARTESIAN_POINT ( 'NONE', ( 33.25621426901267300, -31.01907745261669900, 27.14746364559363900 ) ) ; +#2518 = CARTESIAN_POINT ( 'NONE', ( 36.69012155064431400, -36.09185915021927100, 14.72552171518772300 ) ) ; +#2519 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000900, 17.50000000000000400 ) ) ; +#2520 = VECTOR ( 'NONE', #4362, 1000.000000000000000 ) ; +#2521 = CARTESIAN_POINT ( 'NONE', ( 26.82375734990285900, -97.40649683660852500, 22.08787631849742200 ) ) ; +#2522 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2523 = ORIENTED_EDGE ( 'NONE', *, *, #5587, .F. ) ; +#2524 = CARTESIAN_POINT ( 'NONE', ( 12.94477853227735900, -30.80202764871386700, 27.68360602425752500 ) ) ; +#2525 = CARTESIAN_POINT ( 'NONE', ( 9.132648702641908800, -30.16434921301148400, 25.93506076595547000 ) ) ; +#2526 = CARTESIAN_POINT ( 'NONE', ( 0.07775222879382649700, 10.13028869250944000, -18.21135650822972400 ) ) ; +#2527 = CARTESIAN_POINT ( 'NONE', ( 4.016462492614456500, -11.31681958412008400, -22.66051199533468700 ) ) ; +#2528 = AXIS2_PLACEMENT_3D ( 'NONE', #1821, #10983, #822 ) ; +#2529 = CARTESIAN_POINT ( 'NONE', ( 37.91100663578780000, -30.85100739478829700, 23.78732514527126100 ) ) ; +#2530 = CARTESIAN_POINT ( 'NONE', ( -2.445757221341983000E-013, -9.799086984882604800, -13.61682351502692400 ) ) ; +#2531 = LINE ( 'NONE', #8437, #10659 ) ; +#2532 = CARTESIAN_POINT ( 'NONE', ( 34.95956165290783000, -29.91798761082763400, 26.38028316013529600 ) ) ; +#2533 = CARTESIAN_POINT ( 'NONE', ( 33.49213900861833100, -14.68653062219887100, -25.20405078429327600 ) ) ; +#2534 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9848077530122092400, 0.1736481776669238900 ) ) ; +#2535 = CARTESIAN_POINT ( 'NONE', ( 28.62797249531480000, -100.0000000000000900, 21.44942301341156100 ) ) ; +#2536 = CARTESIAN_POINT ( 'NONE', ( 23.34485592008103100, -7.998407050225893900, 29.32691792232613500 ) ) ; +#2537 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2538 = ADVANCED_FACE ( 'NONE', ( #6598 ), #1774, .T. ) ; +#2539 = CARTESIAN_POINT ( 'NONE', ( 7.343523616858204800, -29.44784743418836500, 24.33025234852058500 ) ) ; +#2540 = CARTESIAN_POINT ( 'NONE', ( 14.75283757710032300, -28.11072535569707400, 26.76382095130478300 ) ) ; +#2541 = CARTESIAN_POINT ( 'NONE', ( 36.32811354487274300, -18.35816608487885300, -23.18562631144807500 ) ) ; +#2542 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -97.22636764907197500, 15.70707370164075700 ) ) ; +#2543 = CARTESIAN_POINT ( 'NONE', ( 38.90968804735583600, -30.60943786226153000, 21.75667314088381200 ) ) ; +#2544 = VECTOR ( 'NONE', #22, 1000.000000000000100 ) ; +#2545 = CARTESIAN_POINT ( 'NONE', ( 6.159993227306768100, -17.98650510224358400, -20.11706937349294200 ) ) ; +#2546 = ORIENTED_EDGE ( 'NONE', *, *, #2439, .T. ) ; +#2547 = CARTESIAN_POINT ( 'NONE', ( 5.017987076129501600, -90.62694582891350600, -3.049517885020293800 ) ) ; +#2548 = DIRECTION ( 'NONE', ( -0.01909913463758970000, 0.9998175948922358700, 0.0000000000000000000 ) ) ; +#2549 = CARTESIAN_POINT ( 'NONE', ( 39.99961930248683500, -27.21823579072851700, 7.375970588031600000 ) ) ; +#2550 = EDGE_CURVE ( 'NONE', #9510, #2266, #6274, .T. ) ; +#2551 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2552 = CARTESIAN_POINT ( 'NONE', ( 28.62797249531480000, -97.40649683660852500, 21.90672759567023300 ) ) ; +#2553 = CARTESIAN_POINT ( 'NONE', ( 34.91030444231444800, -20.02731496358006100, -23.79953404730608200 ) ) ; +#2554 = CARTESIAN_POINT ( 'NONE', ( 14.66182586621751200, -19.18855555756814400, 22.38361364648058000 ) ) ; +#2555 = CARTESIAN_POINT ( 'NONE', ( 6.324838595899065800, -28.98200852928415800, 22.61918168941563300 ) ) ; +#2556 = CARTESIAN_POINT ( 'NONE', ( 36.62491253683087000, -97.45100691001778200, 19.50932898102632900 ) ) ; +#2557 = CARTESIAN_POINT ( 'NONE', ( 14.42068888923827800, -100.0000000000000100, -37.03852336990894400 ) ) ; +#2558 = CARTESIAN_POINT ( 'NONE', ( 10.94699873370785200, -30.89858729742855900, 26.82159701667464400 ) ) ; +#2559 = CARTESIAN_POINT ( 'NONE', ( 30.25663480043931100, -28.11102656145721200, 26.76165842702710100 ) ) ; +#2560 = CARTESIAN_POINT ( 'NONE', ( 33.17088904779863900, -30.64916944780892600, 27.28912773831338600 ) ) ; +#2561 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -39.52045731841470700, 19.79474689191102900 ) ) ; +#2562 = LINE ( 'NONE', #9219, #4614 ) ; +#2563 = CARTESIAN_POINT ( 'NONE', ( 30.85894844889570300, -100.0000000000000900, 20.99780054130288700 ) ) ; +#2564 = CARTESIAN_POINT ( 'NONE', ( 35.93898173669022400, -19.40293382129469500, 18.58483821412519500 ) ) ; +#2565 = CARTESIAN_POINT ( 'NONE', ( 12.94431058643385400, -30.66886282213788200, 27.70293462610149900 ) ) ; +#2566 = CARTESIAN_POINT ( 'NONE', ( 10.03220454034423900, -20.32149963875684400, -23.67186603788615800 ) ) ; +#2567 = CARTESIAN_POINT ( 'NONE', ( 9.329605797729232800, -31.15087037151519000, 25.66171754261280600 ) ) ; +#2568 = CARTESIAN_POINT ( 'NONE', ( 12.90136799010446100, -10.43079757070501200, -25.07596123493895100 ) ) ; +#2569 = CARTESIAN_POINT ( 'NONE', ( 4.094990449144096300, -10.11458998921090200, -23.49932959315193800 ) ) ; +#2570 = CARTESIAN_POINT ( 'NONE', ( 10.29483408132304100, -11.82033521164354200, -25.00000000000000000 ) ) ; +#2571 = ORIENTED_EDGE ( 'NONE', *, *, #7026, .F. ) ; +#2572 = CARTESIAN_POINT ( 'NONE', ( 37.81980034632165700, -29.40703755226450500, 24.14914456702772900 ) ) ; +#2573 = EDGE_LOOP ( 'NONE', ( #8998, #9023, #9066, #9187 ) ) ; +#2574 = CARTESIAN_POINT ( 'NONE', ( 0.6441877044608995700, -10.04471786308083600, -16.57293072309432700 ) ) ; +#2575 = FACE_OUTER_BOUND ( 'NONE', #2607, .T. ) ; +#2576 = CARTESIAN_POINT ( 'NONE', ( 35.04370505608168400, -30.53184038228429400, 26.41737744158972500 ) ) ; +#2577 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -39.52045731841470700, 19.79474689191102900 ) ) ; +#2578 = CARTESIAN_POINT ( 'NONE', ( 12.67707326390917200, -9.562556674754178600, -25.00000000000000000 ) ) ; +#2579 = CARTESIAN_POINT ( 'NONE', ( 30.85894844889570300, -97.40649683660852500, 21.45510512356155900 ) ) ; +#2580 = CARTESIAN_POINT ( 'NONE', ( 44.44980271058931700, -7.875175023439477500, -19.63835106476537000 ) ) ; +#2581 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -22.36781719137899300, -11.94938068502386700 ) ) ; +#2582 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 1, ( + ( #5103, #5592 ), + ( #4910, #2368 ), + ( #1371, #7482 ), + ( #4877, #366 ), + ( #358, #316 ), + ( #4864, #4790 ), + ( #4776, #4746 ), + ( #4731, #4701 ), + ( #4651, #4609 ), + ( #4564, #4547 ), + ( #4518, #4502 ), + ( #4476, #4465 ), + ( #4440, #4396 ), + ( #4379, #4370 ), + ( #4351, #4337 ), + ( #4326, #4295 ), + ( #4288, #4267 ), + ( #4254, #4200 ), + ( #4176, #4135 ), + ( #4111, #4086 ), + ( #4070, #4037 ), + ( #4021, #3978 ), + ( #3935, #3893 ), + ( #3877, #3847 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 0.1250000000000002500, 0.1875000000000006100, 0.2500000000000009400, 0.3750000000000011100, 0.4375000000000011700, 0.5000000000000012200, 0.6250000000000007800, 0.6875000000000005600, 0.7500000000000003300, 0.8750000000000002200, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#2583 = CARTESIAN_POINT ( 'NONE', ( 7.476268140284680900, -30.90528359899742100, 24.21526215237449600 ) ) ; +#2584 = CARTESIAN_POINT ( 'NONE', ( 9.320742911815310400, -29.11719972694761800, 26.41444939641740300 ) ) ; +#2585 = EDGE_CURVE ( 'NONE', #7324, #4951, #11861, .T. ) ; +#2586 = CARTESIAN_POINT ( 'NONE', ( 39.55647284895823600, -29.30366542929133200, 22.13367252721167600 ) ) ; +#2587 = CYLINDRICAL_SURFACE ( 'NONE', #6756, 1.200000000000006600 ) ; +#2588 = CARTESIAN_POINT ( 'NONE', ( 36.65617149004590700, -18.01237507300756800, -23.06837513076633100 ) ) ; +#2589 = CARTESIAN_POINT ( 'NONE', ( 38.94931178141813900, -28.87043262030299200, 21.75755471858347400 ) ) ; +#2590 = CARTESIAN_POINT ( 'NONE', ( 1.708702623837155000E-013, -8.256517375249412500, 10.98157180190600200 ) ) ; +#2591 = CARTESIAN_POINT ( 'NONE', ( 29.54941352505466100, -30.77347774677275200, 28.36758194924233900 ) ) ; +#2592 = CARTESIAN_POINT ( 'NONE', ( 15.65273288871557300, -28.08123352512465600, 26.96594673378587000 ) ) ; +#2593 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122092400, 0.1736481776669239200 ) ) ; +#2594 = ORIENTED_EDGE ( 'NONE', *, *, #7006, .F. ) ; +#2595 = CARTESIAN_POINT ( 'NONE', ( 5.835884129901168100, -30.38182878635393500, 22.59111757245545600 ) ) ; +#2596 = ORIENTED_EDGE ( 'NONE', *, *, #10536, .F. ) ; +#2597 = CARTESIAN_POINT ( 'NONE', ( 16.38391811981080400, -97.40634803306923600, 21.90682997063267800 ) ) ; +#2598 = CARTESIAN_POINT ( 'NONE', ( 10.94699984438997500, -30.37711069460000600, 26.91355370893402800 ) ) ; +#2599 = FACE_OUTER_BOUND ( 'NONE', #9237, .T. ) ; +#2600 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -5.000000000000002700, -19.35342349036134000 ) ) ; +#2601 = EDGE_CURVE ( 'NONE', #6805, #614, #9004, .T. ) ; +#2602 = CARTESIAN_POINT ( 'NONE', ( 33.16171613315940900, -30.96119177865956800, 27.21229430173019300 ) ) ; +#2603 = CARTESIAN_POINT ( 'NONE', ( 10.55665263229847500, -12.50000000000001200, 17.67984228758283600 ) ) ; +#2604 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000900, 17.50000000000000400 ) ) ; +#2605 = CARTESIAN_POINT ( 'NONE', ( 34.79564257979806300, -31.13941768295573100, 26.27055552289869000 ) ) ; +#2606 = CARTESIAN_POINT ( 'NONE', ( 13.25214061282675700, -30.84217839300654200, 27.77704758657926500 ) ) ; +#2607 = EDGE_LOOP ( 'NONE', ( #10965, #11456, #6849, #12065 ) ) ; +#2608 = CARTESIAN_POINT ( 'NONE', ( 9.197777209681289500, -30.41995730929388500, 25.99074115554883900 ) ) ; +#2609 = CARTESIAN_POINT ( 'NONE', ( 41.14597575539968200, -9.905603395584089200, 22.67717224403646600 ) ) ; +#2610 = CARTESIAN_POINT ( 'NONE', ( 3.873926834461368900, -9.167723988679846100, -24.51112106489197000 ) ) ; +#2611 = FACE_OUTER_BOUND ( 'NONE', #12017, .T. ) ; +#2612 = CARTESIAN_POINT ( 'NONE', ( 38.05707789645232000, -30.50513802680722400, 24.16399157623022000 ) ) ; +#2613 = CARTESIAN_POINT ( 'NONE', ( -3.209238430557093100E-014, -4.963377264476700500, -19.39189211730860400 ) ) ; +#2614 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #9669, #1408, #10674 ), + ( #4550, #11696, #5597 ), + ( #12663, #6639, #562 ), + ( #7680, #1570, #8705 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.01394155129322715800, 0.01907858170924749100 ), + ( 0.1647082622626200900, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 0.9208870082447091500, 0.7598390309371709800, 1.000000000000000000), + ( 0.9208908081281498300, 0.7598505661309389300, 1.000000000000000000), + ( 0.9208886195871226500, 0.7598439224416753100, 1.000000000000000000), + ( 0.9208785904453784500, 0.7598134772727254100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2615 = CARTESIAN_POINT ( 'NONE', ( 34.95978849461608500, -31.14669499605671600, 26.16402795227143900 ) ) ; +#2616 = ORIENTED_EDGE ( 'NONE', *, *, #9578, .F. ) ; +#2617 = CARTESIAN_POINT ( 'NONE', ( 11.60409526221158000, -10.24125867097655800, -25.00000000000381900 ) ) ; +#2618 = CARTESIAN_POINT ( 'NONE', ( 31.30369952359695400, -100.0000000000000900, 20.89608853318620500 ) ) ; +#2619 = CARTESIAN_POINT ( 'NONE', ( 9.983037242717573500, -23.53479309710042600, -23.53683259935027300 ) ) ; +#2620 = CARTESIAN_POINT ( 'NONE', ( 7.265022067962673800, -29.90510571822327900, 24.59614841312277600 ) ) ; +#2621 = ORIENTED_EDGE ( 'NONE', *, *, #5583, .F. ) ; +#2622 = CARTESIAN_POINT ( 'NONE', ( 6.734989213169036800, -31.26328882408918700, 24.40521221712850800 ) ) ; +#2623 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999979400, -5.508637839722339000, -18.81802526778755800 ) ) ; +#2624 = CARTESIAN_POINT ( 'NONE', ( 44.40096991804397000, -95.07596123493894400, 0.7602325291598685000 ) ) ; +#2625 = EDGE_CURVE ( 'NONE', #2631, #1250, #9537, .T. ) ; +#2626 = CARTESIAN_POINT ( 'NONE', ( 39.25410072474279100, -30.46122343930243700, 21.93440590565440800 ) ) ; +#2627 = ORIENTED_EDGE ( 'NONE', *, *, #1272, .T. ) ; +#2628 = ORIENTED_EDGE ( 'NONE', *, *, #3063, .F. ) ; +#2629 = CARTESIAN_POINT ( 'NONE', ( 1.751120735233665700, -8.800629358799852800, -23.00000000000000000 ) ) ; +#2630 = CARTESIAN_POINT ( 'NONE', ( 37.37689644450954100, -18.00577708983671200, -22.29060423057151800 ) ) ; +#2631 = VERTEX_POINT ( 'NONE', #1062 ) ; +#2632 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -22.23305960276995900, -11.77852179516278500 ) ) ; +#2633 = CARTESIAN_POINT ( 'NONE', ( 36.62783056562945200, -99.99999999999995700, 19.05843952993934600 ) ) ; +#2634 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 12.00000000000000000, -22.50000000000000000 ) ) ; +#2635 = VERTEX_POINT ( 'NONE', #1046 ) ; +#2636 = CARTESIAN_POINT ( 'NONE', ( 34.80976399937078000, -31.14018506581578200, 26.26123324576807100 ) ) ; +#2637 = CARTESIAN_POINT ( 'NONE', ( 20.11220835328774500, -25.56956072262199700, 22.25466636682307000 ) ) ; +#2638 = CARTESIAN_POINT ( 'NONE', ( 6.084989116705558300, -29.21182597797006200, 22.78233660807186200 ) ) ; +#2639 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2640 = CARTESIAN_POINT ( 'NONE', ( 7.280000885119435800, -99.99999999999998600, 18.51517745284062900 ) ) ; +#2641 = CARTESIAN_POINT ( 'NONE', ( 11.15715059412892900, -31.04304164602579900, 26.85992293613388800 ) ) ; +#2642 = ORIENTED_EDGE ( 'NONE', *, *, #7368, .T. ) ; +#2643 = EDGE_CURVE ( 'NONE', #3193, #1086, #7175, .T. ) ; +#2644 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2645 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #7670, #12608, #5546 ), + ( #11650, #1207, #1514 ), + ( #7628, #6537, #7587 ), + ( #481, #8615, #12569 ), + ( #12535, #10626, #9617 ), + ( #7549, #6498, #5460 ), + ( #1475, #1183, #11351 ), + ( #10332, #11265, #3808 ), + ( #12289, #4383, #2982 ), + ( #9320, #8314, #6228 ), + ( #2184, #5189, #6413 ), + ( #225, #12332, #6275 ), + ( #7284, #10970, #7547 ), + ( #377, #415, #11495 ), + ( #5336, #12464, #5389 ), + ( #2321, #11454, #4556 ), + ( #326, #6373, #8458 ), + ( #7429, #1323, #10476 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 3.141592653589793100, 3.339120291684251300, 3.536647929778709500, 3.734175567873167600, 3.931703205967626200, 4.129230844062084800, 4.326758482156543000, 4.524286120251001200, 4.721813758345459400 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.6427876096865418100, 1.000000000000000000), + ( 1.000000000000000000, 0.6427869131627908000, 1.000000000000000000), + ( 1.000000000000000000, 0.6432286554915397400, 1.000000000000000000), + ( 1.000000000000000000, 0.6449704378541664100, 1.000000000000000000), + ( 1.000000000000000000, 0.6462710433721369200, 1.000000000000000000), + ( 1.000000000000000000, 0.6496664724625566000, 1.000000000000000000), + ( 1.000000000000000000, 0.6517610593504992200, 1.000000000000000000), + ( 1.000000000000000000, 0.6566415426767288100, 1.000000000000000000), + ( 1.000000000000000000, 0.6594271385701525600, 1.000000000000000000), + ( 1.000000000000000000, 0.6655575263461980300, 1.000000000000000000), + ( 1.000000000000000000, 0.6689019988231476000, 1.000000000000000000), + ( 1.000000000000000000, 0.6759982929549097600, 1.000000000000000000), + ( 1.000000000000000000, 0.6797498133379195100, 1.000000000000000000), + ( 1.000000000000000000, 0.6874980667938469500, 1.000000000000000000), + ( 1.000000000000000000, 0.6914945400838149500, 1.000000000000000000), + ( 1.000000000000000000, 0.6995687671181795000, 1.000000000000000000), + ( 1.000000000000000000, 0.7036464409744374000, 1.000000000000000000), + ( 1.000000000000000000, 0.7076851599719636800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2646 = EDGE_CURVE ( 'NONE', #10127, #8742, #4760, .T. ) ; +#2647 = EDGE_LOOP ( 'NONE', ( #12940, #129, #589, #605 ) ) ; +#2648 = CARTESIAN_POINT ( 'NONE', ( 38.41394845513585200, -7.784534137634758500, -24.99999999698373200 ) ) ; +#2649 = CARTESIAN_POINT ( 'NONE', ( 32.86607889155462200, -30.56784237441587100, 27.41785336499983900 ) ) ; +#2650 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #7009, #5950, #2929, #10057 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 1.570796326794896600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#2651 = CARTESIAN_POINT ( 'NONE', ( 5.436028331330875900, -17.97337863747229400, -18.70884884158865400 ) ) ; +#2652 = CARTESIAN_POINT ( 'NONE', ( 31.30369952359695400, -97.40649683660852500, 21.35339311544487400 ) ) ; +#2653 = CARTESIAN_POINT ( 'NONE', ( 37.81892448110980400, -19.54519567370040500, 16.06407863098538500 ) ) ; +#2654 = CARTESIAN_POINT ( 'NONE', ( 13.25213903021164300, -30.75687424727632500, 27.79208840818402500 ) ) ; +#2655 = CARTESIAN_POINT ( 'NONE', ( 9.336164935117883700, -29.72170134930039300, 25.90377069324404900 ) ) ; +#2656 = CARTESIAN_POINT ( 'NONE', ( 11.27611398378732400, -17.69707549379937800, -24.95865060903612300 ) ) ; +#2657 = CARTESIAN_POINT ( 'NONE', ( 34.73942355647749700, -12.19623197613948700, 24.38134862614391800 ) ) ; +#2658 = CARTESIAN_POINT ( 'NONE', ( 6.350205869846187800, -9.613664397237041500, -24.81361297137104000 ) ) ; +#2659 = ORIENTED_EDGE ( 'NONE', *, *, #593, .T. ) ; +#2660 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2661 = ORIENTED_EDGE ( 'NONE', *, *, #7340, .F. ) ; +#2662 = CARTESIAN_POINT ( 'NONE', ( 37.65164439835462700, -29.20496743390625500, 24.07292536083852900 ) ) ; +#2663 = ORIENTED_EDGE ( 'NONE', *, *, #7921, .F. ) ; +#2664 = CARTESIAN_POINT ( 'NONE', ( 34.64664861254016900, -30.40916853123793100, 26.62908926547008200 ) ) ; +#2665 = CARTESIAN_POINT ( 'NONE', ( 0.6504461263044274400, -10.33683066136853600, 12.47952664844704900 ) ) ; +#2666 = CARTESIAN_POINT ( 'NONE', ( 11.29968668859945600, -11.30772454140203500, -25.06484075596477400 ) ) ; +#2667 = CARTESIAN_POINT ( 'NONE', ( 32.18256521388330100, -100.0000000000000900, 20.67194166316896900 ) ) ; +#2668 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122092400, 0.1736481776669238900 ) ) ; +#2669 = ORIENTED_EDGE ( 'NONE', *, *, #9056, .F. ) ; +#2670 = CARTESIAN_POINT ( 'NONE', ( 7.885137266723650600, -31.10469147544257100, 24.35069906505329500 ) ) ; +#2671 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, -16.29999999999998600 ) ) ; +#2672 = CIRCLE ( 'NONE', #12405, 2.500000000000002200 ) ; +#2673 = CARTESIAN_POINT ( 'NONE', ( 41.58392439815142400, -11.11908610672228900, -21.89362371813596700 ) ) ; +#2674 = CARTESIAN_POINT ( 'NONE', ( 36.50319929021446800, -95.07596123493893000, 4.623480266334924600 ) ) ; +#2675 = CARTESIAN_POINT ( 'NONE', ( 37.41384898381490800, -95.07662687573267100, 13.35530977639257900 ) ) ; +#2676 = VERTEX_POINT ( 'NONE', #536 ) ; +#2677 = VECTOR ( 'NONE', #6512, 1000.000000000000100 ) ; +#2678 = CARTESIAN_POINT ( 'NONE', ( 38.96853473689041200, -29.01482919438155500, 22.30536508328592800 ) ) ; +#2679 = CARTESIAN_POINT ( 'NONE', ( 5.904574336812554100, -17.98221839535344200, -19.65719849388077000 ) ) ; +#2680 = CARTESIAN_POINT ( 'NONE', ( 38.01157344341744700, -17.99877916823158200, -21.45462542225818900 ) ) ; +#2681 = DIRECTION ( 'NONE', ( -0.9990121743732146600, -0.04443732050992270400, 0.0000000000000000000 ) ) ; +#2682 = CARTESIAN_POINT ( 'NONE', ( 44.47213083400070100, -11.05573833199855800, -11.53187062880260200 ) ) ; +#2683 = CARTESIAN_POINT ( 'NONE', ( 32.18256521388330100, -97.40649683660852500, 21.12924624542764100 ) ) ; +#2684 = CIRCLE ( 'NONE', #12482, 3.189999999999995100 ) ; +#2685 = CARTESIAN_POINT ( 'NONE', ( 6.526752634413217200, -30.77792386886279300, 22.90163972923295400 ) ) ; +#2686 = CARTESIAN_POINT ( 'NONE', ( 4.735212417093374700, -11.35361984176035800, -23.44579650568498200 ) ) ; +#2687 = EDGE_LOOP ( 'NONE', ( #12164, #7463, #5349, #5985, #9045 ) ) ; +#2688 = CARTESIAN_POINT ( 'NONE', ( 26.00818423365776200, -23.91167042858689800, -27.42717282292197500 ) ) ; +#2689 = CARTESIAN_POINT ( 'NONE', ( 11.13333952750830300, -30.58813174857418500, 26.99268031891313100 ) ) ; +#2690 = CARTESIAN_POINT ( 'NONE', ( 19.89693543307430800, -19.87568216611874300, 23.25829123793062100 ) ) ; +#2691 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 1, 3, ( + ( #7066, #7082, #7021, #6992, #6896, #6857, #6837, #6809, #6763, #6745, #6721, #6675, #6583, #6564, #6523, #6501, #6480, #6452 ), + ( #6434, #6408, #6392, #6361, #6343, #6297, #6268, #6207, #6114, #6097, #6071, #6052, #6028, #6008, #5962, #5936, #5789, #5726 ), + ( #5709, #5680, #5635, #5613, #5590, #5573, #5529, #7399, #7371, #7352, #5486, #5462, #5446, #5421, #5404, #5377, #5324, #5277 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 2, 1, 2 ), + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( -0.2191260670662207900, 0.0000000000000000000, 1.000000000000000000 ), + ( 1.570796326794896800, 1.776963344686727000, 1.983130362578557500, 2.189297380470387500, 2.395464398362217900, 2.601631416254048400, 2.807798434145878400, 3.013965452037708400, 3.220132469929538800 ), + .UNSPECIFIED. ) ; +#2692 = CARTESIAN_POINT ( 'NONE', ( 39.79610365149766700, -8.598877031589685400, -24.90759357679471700 ) ) ; +#2693 = CARTESIAN_POINT ( 'NONE', ( 32.86819684463533500, -30.83143788807231900, 27.37704055840217500 ) ) ; +#2694 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2695 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #5604, #1581, #8715 ), + ( #2578, #9719, #3598 ), + ( #10724, #4607, #11744 ), + ( #5652, #12707, #6692 ), + ( #615, #7732, #1620 ), + ( #8759, #2617, #9757 ), + ( #3645, #10770, #4650 ), + ( #11784, #5696, #12746 ), + ( #6735, #662, #7775 ), + ( #1664, #8799, #2666 ), + ( #9799, #3681, #10812 ), + ( #4699, #1573, #8707 ), + ( #2570, #9712, #3590 ), + ( #10715, #4602, #11739 ), + ( #5644, #12700, #6685 ), + ( #608, #7723, #1614 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0006675123569200391900, 0.001335024713840078400, 0.002002537070760117800, 0.002670049427680156800, 0.003337561784600196200, 0.004005074141520235600, 0.005340098855360313500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9961946980917458800, 1.000000000000000000), + ( 1.000000000000000000, 0.9965016510078110700, 1.000000000000000000), + ( 1.000000000000000000, 0.9967737684650557200, 1.000000000000000000), + ( 1.000000000000000000, 0.9972159068304660100, 1.000000000000000000), + ( 1.000000000000000000, 0.9973831563980000100, 1.000000000000000000), + ( 1.000000000000000000, 0.9975564950394659700, 1.000000000000000000), + ( 1.000000000000000000, 0.9975625091594497700, 1.000000000000000000), + ( 1.000000000000000000, 0.9973971813884694400, 1.000000000000000000), + ( 1.000000000000000000, 0.9972262744373037200, 1.000000000000000000), + ( 1.000000000000000000, 0.9967527177678925400, 1.000000000000000000), + ( 1.000000000000000000, 0.9964536922304674200, 1.000000000000000000), + ( 1.000000000000000000, 0.9957637816030167100, 1.000000000000000000), + ( 1.000000000000000000, 0.9953728943609350100, 1.000000000000000000), + ( 1.000000000000000000, 0.9941224425641054200, 1.000000000000000000), + ( 1.000000000000000000, 0.9931766107713022600, 1.000000000000000000), + ( 1.000000000000000000, 0.9921686194339962600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2696 = CARTESIAN_POINT ( 'NONE', ( 6.988426314101407600, -17.99877916506638100, -21.45462506896938800 ) ) ; +#2697 = CARTESIAN_POINT ( 'NONE', ( 23.82311356408231600, -19.13443560856328300, 23.34239922822204600 ) ) ; +#2698 = CARTESIAN_POINT ( 'NONE', ( 13.35410004522824100, -30.86025997776262000, 27.80614220807977000 ) ) ; +#2699 = FACE_OUTER_BOUND ( 'NONE', #1151, .T. ) ; +#2700 = CARTESIAN_POINT ( 'NONE', ( 9.387279815652789200, -30.61652581600575100, 26.06819653912313200 ) ) ; +#2701 = CARTESIAN_POINT ( 'NONE', ( 26.90836146088688700, -30.70521429971881800, 28.77076004141554900 ) ) ; +#2702 = CARTESIAN_POINT ( 'NONE', ( 41.72327898825455600, -9.693645654354444500, 22.50000000000000000 ) ) ; +#2703 = CARTESIAN_POINT ( 'NONE', ( 6.585993232661860700, -7.784682745201929600, -25.00000000548237000 ) ) ; +#2704 = CARTESIAN_POINT ( 'NONE', ( 6.158268339717666400E-014, -5.508147949342991900, -18.81854093221082300 ) ) ; +#2705 = CARTESIAN_POINT ( 'NONE', ( 38.10674660140454500, -30.23055947362468700, 24.29452835587212100 ) ) ; +#2706 = EDGE_CURVE ( 'NONE', #7458, #11262, #8696, .T. ) ; +#2707 = AXIS2_PLACEMENT_3D ( 'NONE', #7702, #1596, #8733 ) ; +#2708 = CARTESIAN_POINT ( 'NONE', ( 34.61638739763014200, -31.00935864491148700, 26.46600507431467300 ) ) ; +#2709 = CARTESIAN_POINT ( 'NONE', ( 33.46679052902938900, -30.32071901585561900, 27.16930822170765600 ) ) ; +#2710 = VECTOR ( 'NONE', #10190, 1000.000000000000100 ) ; +#2711 = CARTESIAN_POINT ( 'NONE', ( 32.61771964037731700, -100.0000000000000900, 20.54931069798304200 ) ) ; +#2712 = AXIS2_PLACEMENT_3D ( 'NONE', #10683, #6599, #4562 ) ; +#2713 = CARTESIAN_POINT ( 'NONE', ( 34.42504062929803900, -19.32192852287203900, 20.02018352160552100 ) ) ; +#2714 = EDGE_LOOP ( 'NONE', ( #6515, #3239, #5141, #7256, #876, #10721 ) ) ; +#2715 = CARTESIAN_POINT ( 'NONE', ( 7.535837513175798600, -30.24269860808819400, 24.87101691426943600 ) ) ; +#2716 = CARTESIAN_POINT ( 'NONE', ( 32.55833445423717600, -89.32382647199132500, 8.976239578196249600 ) ) ; +#2717 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000900, 17.50000000000000400 ) ) ; +#2718 = VECTOR ( 'NONE', #5483, 1000.000000000000000 ) ; +#2719 = CARTESIAN_POINT ( 'NONE', ( 39.70892791013363900, -30.08405332057920100, 22.10379076969348200 ) ) ; +#2720 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2721 = CARTESIAN_POINT ( 'NONE', ( 38.84000664457243300, -17.98650510435557200, -20.11706959945769700 ) ) ; +#2722 = CARTESIAN_POINT ( 'NONE', ( 36.25788552551976100, -31.14518111848855900, 25.18234278068292300 ) ) ; +#2723 = CARTESIAN_POINT ( 'NONE', ( 3.276721011745443500, -9.693645654354444500, 22.50000000000000000 ) ) ; +#2724 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000009200, -12.49999999999999600, 22.05918254822886100 ) ) ; +#2725 = EDGE_CURVE ( 'NONE', #216, #7050, #3550, .T. ) ; +#2726 = CARTESIAN_POINT ( 'NONE', ( 44.76684286905963000, -6.522774761112951400, 16.63956975346978200 ) ) ; +#2727 = CARTESIAN_POINT ( 'NONE', ( 32.61771964037731700, -97.40649683660852500, 21.00661528024171100 ) ) ; +#2728 = CARTESIAN_POINT ( 'NONE', ( 8.377901470461942800, -94.71789415299495800, 15.72994732997521800 ) ) ; +#2729 = CARTESIAN_POINT ( 'NONE', ( 6.011284795090639400, -29.72542818524033600, 23.19557939762840000 ) ) ; +#2730 = LINE ( 'NONE', #3340, #10229 ) ; +#2731 = CARTESIAN_POINT ( 'NONE', ( 38.74309991432596700, -97.42196504633055600, 18.37393771276376200 ) ) ; +#2732 = CARTESIAN_POINT ( 'NONE', ( 36.99317317242195500, -23.31194104960010100, -21.27732662496443400 ) ) ; +#2733 = CARTESIAN_POINT ( 'NONE', ( 11.25713596768263400, -31.06351300984293200, 26.89903447434005900 ) ) ; +#2734 = CARTESIAN_POINT ( 'NONE', ( 3.420719157388534700, -11.12122435640672400, -21.89936459749328500 ) ) ; +#2735 = CARTESIAN_POINT ( 'NONE', ( 39.11830751150119300, -10.48265560924229200, -24.49319526461448500 ) ) ; +#2736 = CARTESIAN_POINT ( 'NONE', ( 32.66196108391385900, -30.52795424243147300, 27.49676432448806200 ) ) ; +#2737 = PLANE ( 'NONE', #1305 ) ; +#2738 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2739 = CARTESIAN_POINT ( 'NONE', ( 33.59572391983773800, -19.28596040674280200, 20.65750808814991000 ) ) ; +#2740 = CARTESIAN_POINT ( 'NONE', ( 13.35516947506693000, -30.79550571608261900, 27.81875855585946400 ) ) ; +#2741 = CARTESIAN_POINT ( 'NONE', ( 9.493535121168891400, -29.82621474690887800, 26.04202207400392800 ) ) ; +#2742 = FACE_OUTER_BOUND ( 'NONE', #6976, .T. ) ; +#2743 = CARTESIAN_POINT ( 'NONE', ( 44.99545598845735100, -5.246348068028273000, 16.25417450634800100 ) ) ; +#2744 = CARTESIAN_POINT ( 'NONE', ( 5.413418071806551900, -24.62443967611498900, 10.82115605377250100 ) ) ; +#2745 = CARTESIAN_POINT ( 'NONE', ( 37.18671926839812200, -100.0000000000000100, -3.238776261381151500 ) ) ; +#2746 = CARTESIAN_POINT ( 'NONE', ( -6.071532165918821700E-015, -6.904110807636632400, -17.07146734113968400 ) ) ; +#2747 = CARTESIAN_POINT ( 'NONE', ( 37.65061063133800400, -31.02949559222202700, 23.75030097574461200 ) ) ; +#2748 = CARTESIAN_POINT ( 'NONE', ( 28.64030262241248800, -22.72445734469626900, -26.88338591038883500 ) ) ; +#2749 = CARTESIAN_POINT ( 'NONE', ( 34.42675254078550000, -30.19301681413551100, 26.71819783076190200 ) ) ; +#2750 = CARTESIAN_POINT ( 'NONE', ( 35.63706668409074000, -29.72903959188766600, 25.92251303182309000 ) ) ; +#2751 = CIRCLE ( 'NONE', #7652, 2.499999999999999100 ) ; +#2752 = CARTESIAN_POINT ( 'NONE', ( 33.91056608381879300, -100.0000000000000900, 20.15028419018138800 ) ) ; +#2753 = CARTESIAN_POINT ( 'NONE', ( 31.82735840595893300, -19.22460949266372100, 21.74459434482389900 ) ) ; +#2754 = CARTESIAN_POINT ( 'NONE', ( 7.885930725230872800, -29.33695613730317600, 24.66154783701732400 ) ) ; +#2755 = CARTESIAN_POINT ( 'NONE', ( -1.500922423586149200E-014, -99.99999999999998600, 21.63057173623875000 ) ) ; +#2756 = CARTESIAN_POINT ( 'NONE', ( 6.982471627637441000, -30.95522397176753100, 23.28524786635210500 ) ) ; +#2757 = CARTESIAN_POINT ( 'NONE', ( 26.31686621966028000, -95.07596123493894400, 15.95758058754210400 ) ) ; +#2758 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -8.819660112500990600, 0.0000000000000000000 ) ) ; +#2759 = CARTESIAN_POINT ( 'NONE', ( 38.64776562293053500, -28.96979270885523400, 22.62301380963769000 ) ) ; +#2760 = ORIENTED_EDGE ( 'NONE', *, *, #2643, .T. ) ; +#2761 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2762 = CARTESIAN_POINT ( 'NONE', ( 40.33811171613953700, -17.95423838147779300, -16.74269425334881900 ) ) ; +#2763 = VECTOR ( 'NONE', #8788, 1000.000000000000000 ) ; +#2764 = CARTESIAN_POINT ( 'NONE', ( 36.31435970350003800, -30.07981896282063900, 25.63355204756464200 ) ) ; +#2765 = CARTESIAN_POINT ( 'NONE', ( 3.276721011745441700, -9.693645654354448000, 25.00000000000000400 ) ) ; +#2766 = CARTESIAN_POINT ( 'NONE', ( 26.77199370474576100, -20.86209279578276500, -26.81137431312761900 ) ) ; +#2767 = CARTESIAN_POINT ( 'NONE', ( 44.98080874645879800, -5.627738023359040800, 16.11755069119296400 ) ) ; +#2768 = CARTESIAN_POINT ( 'NONE', ( 33.91056608381879300, -97.40649683660852500, 20.60758877244006000 ) ) ; +#2769 = CARTESIAN_POINT ( 'NONE', ( 14.47358604983599900, -95.07596123493894400, 16.23804165349144700 ) ) ; +#2770 = CARTESIAN_POINT ( 'NONE', ( 6.792798485760045000, -30.90692507149297800, 23.02664084681876100 ) ) ; +#2771 = CARTESIAN_POINT ( 'NONE', ( 4.547799686762597400, -11.38369960209542800, -23.24693898555795400 ) ) ; +#2772 = CARTESIAN_POINT ( 'NONE', ( 17.06482570942277000, -28.03496589752020500, 27.28314026791135300 ) ) ; +#2773 = CARTESIAN_POINT ( 'NONE', ( 11.23148315482631600, -30.69929827960564600, 27.02037928554854000 ) ) ; +#2774 = EDGE_LOOP ( 'NONE', ( #2066, #9242, #9865, #10189 ) ) ; +#2775 = CARTESIAN_POINT ( 'NONE', ( 11.69128624374137000, -19.27713010190455000, 20.81409148042542500 ) ) ; +#2777 = CARTESIAN_POINT ( 'NONE', ( 40.63402826490973800, -10.07536656410822900, -23.74210523956845300 ) ) ; +#2776 = AXIS2_PLACEMENT_3D ( 'NONE', #3997, #5035, #12133 ) ; +#2778 = CARTESIAN_POINT ( 'NONE', ( 32.66697705708598000, -30.76251306135377200, 27.47100936314428300 ) ) ; +#2779 = ORIENTED_EDGE ( 'NONE', *, *, #11873, .F. ) ; +#2780 = CARTESIAN_POINT ( 'NONE', ( 19.96403690155396000, -27.96616264927604300, 27.45684688047060000 ) ) ; +#2781 = CARTESIAN_POINT ( 'NONE', ( 32.79867032678064500, -10.39054571010250600, -25.05494009372924300 ) ) ; +#2782 = CARTESIAN_POINT ( 'NONE', ( 6.683383018234897200, -7.412293995505712600, -24.99999999999997500 ) ) ; +#2783 = CARTESIAN_POINT ( 'NONE', ( 13.55966201846201700, -30.84522177571969000, 27.87327597101932500 ) ) ; +#2784 = CARTESIAN_POINT ( 'NONE', ( 9.519910309362364500, -30.88266603498320300, 26.01753613480902400 ) ) ; +#2785 = CARTESIAN_POINT ( 'NONE', ( 0.09712465669868176900, 10.19006527892302000, 17.85934566586512400 ) ) ; +#2786 = EDGE_LOOP ( 'NONE', ( #8585, #8846, #9040, #9202 ) ) ; +#2787 = CARTESIAN_POINT ( 'NONE', ( 12.16130385769447600, -20.37056247578119500, 20.96019825669816000 ) ) ; +#2788 = CARTESIAN_POINT ( 'NONE', ( 31.30424908285672800, -100.0000000000000100, 4.900729108231346700 ) ) ; +#2789 = ORIENTED_EDGE ( 'NONE', *, *, #5958, .F. ) ; +#2790 = CARTESIAN_POINT ( 'NONE', ( 5.966458782106044200, -30.51772429850681700, 21.46670159410453500 ) ) ; +#2791 = CARTESIAN_POINT ( 'NONE', ( 37.91728389425376400, -29.99755695580891400, 24.47577009286059300 ) ) ; +#2792 = ORIENTED_EDGE ( 'NONE', *, *, #4132, .F. ) ; +#2793 = CARTESIAN_POINT ( 'NONE', ( 28.13585834834680800, -17.32121861667333800, -26.29092837378456000 ) ) ; +#2794 = CARTESIAN_POINT ( 'NONE', ( 34.45181817794814800, -30.77866339229983700, 26.66472282688139500 ) ) ; +#2795 = CARTESIAN_POINT ( 'NONE', ( 37.61001559113174900, -29.21185881808619600, 24.11812812894727300 ) ) ; +#2796 = ORIENTED_EDGE ( 'NONE', *, *, #1560, .F. ) ; +#2797 = CARTESIAN_POINT ( 'NONE', ( 34.75567112787246800, -100.0000000000000900, 19.84282872635087000 ) ) ; +#2798 = CARTESIAN_POINT ( 'NONE', ( 4.068534125808990400, -8.872477361301308800, -24.99999999999997200 ) ) ; +#2799 = EDGE_LOOP ( 'NONE', ( #10773, #10894, #10907 ) ) ; +#2800 = VERTEX_POINT ( 'NONE', #378 ) ; +#2801 = CARTESIAN_POINT ( 'NONE', ( 7.742144533382236700, -30.50125987546722000, 24.94080283892097700 ) ) ; +#2802 = CARTESIAN_POINT ( 'NONE', ( 18.83555649720622700, -21.52848238229859800, -27.03278249062136500 ) ) ; +#2803 = CARTESIAN_POINT ( 'NONE', ( 8.832495092462398400, -31.16598029775519400, 25.23761370987372000 ) ) ; +#2804 = CARTESIAN_POINT ( 'NONE', ( 42.97446304501251300, 10.30553923381153700, -24.87231522506261800 ) ) ; +#2805 = EDGE_CURVE ( 'NONE', #3116, #6650, #11375, .T. ) ; +#2806 = CARTESIAN_POINT ( 'NONE', ( 39.59787456001856000, -29.80178011060059600, 22.47658394590677800 ) ) ; +#2807 = CARTESIAN_POINT ( 'NONE', ( 30.16723838798599600, -32.99548121487465800, 25.94404977877905300 ) ) ; +#2808 = CARTESIAN_POINT ( 'NONE', ( 11.71221654547091100, -12.49999999999999600, 18.86759697331706000 ) ) ; +#2809 = VERTEX_POINT ( 'NONE', #433 ) ; +#2810 = CARTESIAN_POINT ( 'NONE', ( 36.26606647354096700, -30.91761258702620900, 25.41906846854338700 ) ) ; +#2811 = CARTESIAN_POINT ( 'NONE', ( 7.571179695556262200, -8.702901686948671100, 25.00000000000000000 ) ) ; +#2812 = CARTESIAN_POINT ( 'NONE', ( 29.00957818365025200, -18.04737337675907200, -27.68481998090450300 ) ) ; +#2813 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4527, #4593, #4660, #1690, #1631, #1608, #4501, #4485 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001048075870623636000, 0.001572113805935454900, 0.002096151741247274200 ), + .UNSPECIFIED. ) ; +#2814 = ORIENTED_EDGE ( 'NONE', *, *, #6057, .T. ) ; +#2815 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 10.00000000000000000, 22.50000000000000700 ) ) ; +#2816 = CARTESIAN_POINT ( 'NONE', ( 34.75567112787246800, -97.40649683660852500, 20.30013330860954200 ) ) ; +#2817 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000700, -95.07596123493895800, 17.89388302653839700 ) ) ; +#2818 = CARTESIAN_POINT ( 'NONE', ( 6.142178527140205600, -30.08121492154174300, 23.40402775083261100 ) ) ; +#2819 = CARTESIAN_POINT ( 'NONE', ( 37.69863671672542400, -97.43731214566996400, 18.97906090576825700 ) ) ; +#2820 = CARTESIAN_POINT ( 'NONE', ( 11.25588542876798700, -30.25986028821267800, 27.04353025102232500 ) ) ; +#2821 = AXIS2_PLACEMENT_3D ( 'NONE', #9934, #3811, #10950 ) ; +#2822 = CARTESIAN_POINT ( 'NONE', ( 8.267118735160194000, -19.45889918573857700, 17.59374435005898700 ) ) ; +#2823 = CARTESIAN_POINT ( 'NONE', ( 34.34766618109181000, -20.62124696407172000, 19.81701057544946600 ) ) ; +#2824 = ORIENTED_EDGE ( 'NONE', *, *, #12172, .F. ) ; +#2825 = CARTESIAN_POINT ( 'NONE', ( 42.05626589666546500, -9.308682102298467600, -23.92567098670033600 ) ) ; +#2826 = CARTESIAN_POINT ( 'NONE', ( 32.66168443515666600, -30.96224789142105700, 27.41935159722734400 ) ) ; +#2827 = PERSON_AND_ORGANIZATION ( #10194, #1109 ) ; +#2828 = CARTESIAN_POINT ( 'NONE', ( 20.00735423513291500, -27.96523496585093200, 27.45710953202296500 ) ) ; +#2829 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, -17.49999999999999600 ) ) ; +#2830 = ORIENTED_EDGE ( 'NONE', *, *, #9578, .T. ) ; +#2831 = CARTESIAN_POINT ( 'NONE', ( 36.62352999471487200, -19.44796692963002000, 17.78688966027732100 ) ) ; +#2832 = CARTESIAN_POINT ( 'NONE', ( 13.56047772555751200, -30.81852478675570600, 27.87841877774587800 ) ) ; +#2833 = CARTESIAN_POINT ( 'NONE', ( 9.519911428001236700, -30.11707716041140200, 26.15254441670158400 ) ) ; +#2834 = CARTESIAN_POINT ( 'NONE', ( 14.78046566660977300, -94.74249072621037700, 18.13938558346791700 ) ) ; +#2835 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2836 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2837 = CARTESIAN_POINT ( 'NONE', ( 5.066577560637710100, -29.48969798004427300, 21.64796933291463400 ) ) ; +#2838 = CARTESIAN_POINT ( 'NONE', ( 37.61674943274450600, -30.93696643590801500, 24.03094082730359200 ) ) ; +#2839 = ORIENTED_EDGE ( 'NONE', *, *, #12627, .T. ) ; +#2840 = CARTESIAN_POINT ( 'NONE', ( 33.72413134487375400, -17.54836934082441900, -26.33098117513989300 ) ) ; +#2841 = LINE ( 'NONE', #12440, #184 ) ; +#2842 = CARTESIAN_POINT ( 'NONE', ( 34.12551623012512200, -30.14760300365015100, 26.85326141876702300 ) ) ; +#2843 = CARTESIAN_POINT ( 'NONE', ( 38.40067609239404300, -29.02488638081127100, 23.04544241450258100 ) ) ; +#2844 = ORIENTED_EDGE ( 'NONE', *, *, #4630, .F. ) ; +#2845 = CARTESIAN_POINT ( 'NONE', ( 36.41270741566341200, -100.0000000000000900, 19.14605732016813600 ) ) ; +#2846 = CARTESIAN_POINT ( 'NONE', ( 2.834572336131764700, -9.561546043064572200, -22.35952791239959200 ) ) ; +#2847 = CARTESIAN_POINT ( 'NONE', ( 7.960600715152453200, -29.52182334888421500, 24.87289155649707300 ) ) ; +#2848 = CARTESIAN_POINT ( 'NONE', ( 10.73140286710467000, -20.64355681453387300, -24.20355179138968900 ) ) ; +#2849 = CARTESIAN_POINT ( 'NONE', ( 11.16077461700820600, -31.07172700768039800, 26.84686540244445000 ) ) ; +#2850 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2851 = CARTESIAN_POINT ( 'NONE', ( 43.92515676807627000, 11.67345981010887000, -23.92515676807627000 ) ) ; +#2852 = CARTESIAN_POINT ( 'NONE', ( 38.64951173584625400, -30.75280942704986800, 22.30792296841000100 ) ) ; +#2853 = FACE_OUTER_BOUND ( 'NONE', #2349, .T. ) ; +#2854 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 12.00000000000000000, -24.99999999999999300 ) ) ; +#2855 = CARTESIAN_POINT ( 'NONE', ( 3.947995327665858100, -17.90126656061706700, -11.68084618663847600 ) ) ; +#2856 = CARTESIAN_POINT ( 'NONE', ( 36.04669221415997500, -29.76247709418806400, 25.68925026512052100 ) ) ; +#2857 = CARTESIAN_POINT ( 'NONE', ( 9.467411866914490700, -11.74725430430481100, 24.22895220296764400 ) ) ; +#2858 = CARTESIAN_POINT ( 'NONE', ( 33.46472563149418300, -23.65819966466519000, -24.80341364173601100 ) ) ; +#2859 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2860 = CARTESIAN_POINT ( 'NONE', ( 36.41270741566341200, -97.40649683660852500, 19.60336190242680500 ) ) ; +#2861 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3459, #11617, #488, #7594, #1483, #8625, #2481, #9626, #3501, #10633, #4506, #11657 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001912738555916294300, 0.002869107833874441800, 0.003347292472853519800, 0.003586384792343062000, 0.003825477111832604700 ), + .UNSPECIFIED. ) ; +#2862 = CARTESIAN_POINT ( 'NONE', ( 21.65961539851531000, -7.495227713303696000, -32.90940790145557300 ) ) ; +#2863 = CARTESIAN_POINT ( 'NONE', ( 6.791426335100077000, -29.07224617586162900, 23.35035084088778800 ) ) ; +#2864 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -99.99999999999998600, 6.630571736238761300 ) ) ; +#2865 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1091, #8258, #5317, #9233, #4120, #5280, #5268, #5247 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0009250465802870855300, 0.001850093160574171100, 0.003700186321148342100 ), + .UNSPECIFIED. ) ; +#2866 = CARTESIAN_POINT ( 'NONE', ( 14.04267901973117600, -100.0000000000000000, 20.99909610643876300 ) ) ; +#2867 = CARTESIAN_POINT ( 'NONE', ( 11.43346871989671600, -30.83048029426648300, 27.07875684204162800 ) ) ; +#2868 = CIRCLE ( 'NONE', #200, 1.200000000000013500 ) ; +#2869 = CARTESIAN_POINT ( 'NONE', ( 6.400206354108704900, -19.63365493545102000, 14.49699247884612100 ) ) ; +#2870 = CARTESIAN_POINT ( 'NONE', ( 39.98400399412038600, -26.59148914142678400, 7.569409600064649800 ) ) ; +#2871 = ORIENTED_EDGE ( 'NONE', *, *, #2585, .T. ) ; +#2872 = CARTESIAN_POINT ( 'NONE', ( 32.25985859998748900, -30.74547054019689400, 27.62265890292696800 ) ) ; +#2873 = CARTESIAN_POINT ( 'NONE', ( 16.21137956450034100, -39.19831806811021800, 19.36808549404924000 ) ) ; +#2874 = CARTESIAN_POINT ( 'NONE', ( 7.483068831050357700, -8.844345346948548700, -24.99999999999997500 ) ) ; +#2875 = CARTESIAN_POINT ( 'NONE', ( 13.55969967794074700, -30.78765843762901300, 27.88344796583783500 ) ) ; +#2876 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999990800, -5.493573036197498800, 15.49544551766942200 ) ) ; +#2877 = CARTESIAN_POINT ( 'NONE', ( 9.848774843080640600, -31.11140145638864500, 26.06720044209188100 ) ) ; +#2878 = CARTESIAN_POINT ( 'NONE', ( 10.94535736597875400, -14.60795119524238600, -25.02814452137165400 ) ) ; +#2879 = AXIS2_PLACEMENT_3D ( 'NONE', #6782, #7825, #1708 ) ; +#2880 = CARTESIAN_POINT ( 'NONE', ( 38.74309991433513300, -97.42196504633039900, 18.37393771275845100 ) ) ; +#2881 = AXIS2_PLACEMENT_3D ( 'NONE', #5973, #9080, #2953 ) ; +#2882 = CARTESIAN_POINT ( 'NONE', ( 6.060249138650293700, -30.56614510164166300, 21.52590704258784300 ) ) ; +#2883 = CARTESIAN_POINT ( 'NONE', ( 37.59325481506383000, -29.59954988176124100, 24.51390694463597000 ) ) ; +#2884 = CARTESIAN_POINT ( 'NONE', ( 38.91827195066125000, -18.05570342152533300, -19.90108409933326800 ) ) ; +#2885 = EDGE_CURVE ( 'NONE', #142, #2040, #2407, .T. ) ; +#2886 = FACE_OUTER_BOUND ( 'NONE', #4063, .T. ) ; +#2887 = CARTESIAN_POINT ( 'NONE', ( 34.16273689613814900, -30.65381621173541000, 26.84238444411312600 ) ) ; +#2888 = CARTESIAN_POINT ( 'NONE', ( 38.73663581597542600, -28.94571623654733700, 22.42312171501537300 ) ) ; +#2889 = CARTESIAN_POINT ( 'NONE', ( 4.928978922642046200, -10.27640698109116500, -25.00000000011311500 ) ) ; +#2890 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 1, ( + ( #296, #7356 ), + ( #1298, #8436 ), + ( #2297, #9441 ), + ( #3321, #10450 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 1.000000000000000000), + ( 0.9897976715604743800, 0.9897976715604743800), + ( 0.9897976715604743800, 0.9897976715604743800), + ( 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2891 = CARTESIAN_POINT ( 'NONE', ( 8.216049982757121800, -30.88896820174551300, 25.01356038017554100 ) ) ; +#2892 = CARTESIAN_POINT ( 'NONE', ( 11.27768237472181300, -17.54957129500833100, -26.33119311209226500 ) ) ; +#2893 = CARTESIAN_POINT ( 'NONE', ( 13.66271934689355300, -30.83581715482863200, 27.90612350705921300 ) ) ; +#2894 = CARTESIAN_POINT ( 'NONE', ( 9.838507981324621500, -19.92152058871739600, -23.60363611572255800 ) ) ; +#2895 = CARTESIAN_POINT ( 'NONE', ( 43.60787796154848900, 11.74708242360334200, -22.72157559230984000 ) ) ; +#2896 = CARTESIAN_POINT ( 'NONE', ( 39.24137230266835300, -29.49264596790181900, 22.75248930684456600 ) ) ; +#2897 = CYLINDRICAL_SURFACE ( 'NONE', #7767, 3.189999999999994200 ) ; +#2898 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122092400, -0.1736481776669239200 ) ) ; +#2899 = PLANE ( 'NONE', #6439 ) ; +#2900 = CARTESIAN_POINT ( 'NONE', ( 36.15895502058653900, -30.60119350929239300, 25.70260971063296300 ) ) ; +#2901 = EDGE_CURVE ( 'NONE', #9655, #6842, #570, .T. ) ; +#2902 = CARTESIAN_POINT ( 'NONE', ( 11.16903075079218900, -12.06812211810062000, 24.99999999999999600 ) ) ; +#2903 = CARTESIAN_POINT ( 'NONE', ( 35.77399030244768600, -20.59703347543080200, -22.24440283668776900 ) ) ; +#2904 = EDGE_CURVE ( 'NONE', #2958, #3431, #88, .T. ) ; +#2905 = CARTESIAN_POINT ( 'NONE', ( 6.063047072445690400, -26.23069907378865700, 6.814795083930971700 ) ) ; +#2906 = CARTESIAN_POINT ( 'NONE', ( -0.4070855502403658000, -7.640324711596834500, -17.36404879104323100 ) ) ; +#2907 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12455, #12500, #12539, #12428, #12404, #12385 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001470080359108163300, 0.002940160718216326500 ), + .UNSPECIFIED. ) ; +#2908 = CARTESIAN_POINT ( 'NONE', ( 6.514234125753289600, -30.43959678317542500, 23.64946326803203600 ) ) ; +#2909 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#2910 = CARTESIAN_POINT ( 'NONE', ( 11.43898426034574500, -30.43627082234738900, 27.13566405998865600 ) ) ; +#2911 = CYLINDRICAL_SURFACE ( 'NONE', #6878, 1.200000000000010200 ) ; +#2912 = CARTESIAN_POINT ( 'NONE', ( 5.386102099041530700, -19.80402830396687700, 11.47810246797158300 ) ) ; +#2913 = CARTESIAN_POINT ( 'NONE', ( 44.43564537426490800, -7.362139790067143300, -21.14211580674833300 ) ) ; +#2914 = CARTESIAN_POINT ( 'NONE', ( 32.87324774994757300, -9.649222752281735500, -25.00000000000000000 ) ) ; +#2915 = CARTESIAN_POINT ( 'NONE', ( 32.25912165441691600, -30.91166832290304700, 27.58672871983858200 ) ) ; +#2916 = CARTESIAN_POINT ( 'NONE', ( 7.448788628154316500, -35.14695772055535600, 13.67860515941130100 ) ) ; +#2917 = CARTESIAN_POINT ( 'NONE', ( 5.000602251829162600, -22.35159954334545100, -11.79235445602359700 ) ) ; +#2918 = CARTESIAN_POINT ( 'NONE', ( 13.66307498635414300, -30.82715822942054700, 27.90775392060998800 ) ) ; +#2919 = ORIENTED_EDGE ( 'NONE', *, *, #7023, .T. ) ; +#2920 = AXIS2_PLACEMENT_3D ( 'NONE', #10039, #11054, #1902 ) ; +#2921 = CARTESIAN_POINT ( 'NONE', ( 9.766198240597947900, -30.43251618424514500, 26.32431702407828000 ) ) ; +#2922 = ORIENTED_EDGE ( 'NONE', *, *, #6843, .T. ) ; +#2923 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457639500, -30.82655086342984400, 27.93782961424069500 ) ) ; +#2924 = CARTESIAN_POINT ( 'NONE', ( 30.71800449616246100, -94.74158487160721600, 18.02139609884185500 ) ) ; +#2925 = CARTESIAN_POINT ( 'NONE', ( 5.015649710104863600, -29.83909317294387600, 21.65481648346230900 ) ) ; +#2926 = CARTESIAN_POINT ( 'NONE', ( 37.70443476367137200, -30.61553846354967900, 24.44230469662442900 ) ) ; +#2927 = CARTESIAN_POINT ( 'NONE', ( 25.04568490267498900, -28.77949532703398500, 29.18866828975544800 ) ) ; +#2928 = CARTESIAN_POINT ( 'NONE', ( 34.12541823180368500, -31.09423730244419200, 26.68614310847095100 ) ) ; +#2929 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -89.56735749795936400, 4.661075975869775500 ) ) ; +#2930 = VERTEX_POINT ( 'NONE', #6921 ) ; +#2931 = CARTESIAN_POINT ( 'NONE', ( 37.22463899874275500, -100.0000000000000900, 18.75674221518472600 ) ) ; +#2932 = CARTESIAN_POINT ( 'NONE', ( 30.88839853741784600, -19.19922978021533700, 22.19430136248000100 ) ) ; +#2933 = CARTESIAN_POINT ( 'NONE', ( 8.147507660789544900, -29.98260959227181000, 25.25607791182471100 ) ) ; +#2934 = LINE ( 'NONE', #3536, #278 ) ; +#2935 = CARTESIAN_POINT ( 'NONE', ( 14.02271915150085800, -12.08545524371960100, -25.36772202652769800 ) ) ; +#2936 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000000, -20.68999999999999400 ) ) ; +#2937 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2938 = EDGE_CURVE ( 'NONE', #11075, #1870, #3244, .T. ) ; +#2939 = CARTESIAN_POINT ( 'NONE', ( 38.78011524691456900, -30.66642059709738200, 22.52057610727592500 ) ) ; +#2940 = ORIENTED_EDGE ( 'NONE', *, *, #9131, .T. ) ; +#2941 = CARTESIAN_POINT ( 'NONE', ( -1.256439632392267500E-016, -90.07596123493894400, 16.93034213569669800 ) ) ; +#2942 = ORIENTED_EDGE ( 'NONE', *, *, #11117, .T. ) ; +#2943 = CARTESIAN_POINT ( 'NONE', ( 35.91894808104752500, -29.65295151833688100, 25.71342185716473200 ) ) ; +#2944 = CARTESIAN_POINT ( 'NONE', ( 34.76469184455232400, -13.90330421360678600, -24.99999999999025500 ) ) ; +#2945 = CARTESIAN_POINT ( 'NONE', ( 38.87767162386170100, -17.98662240207607600, -20.12756911770263100 ) ) ; +#2946 = ORIENTED_EDGE ( 'NONE', *, *, #6577, .F. ) ; +#2947 = CARTESIAN_POINT ( 'NONE', ( 38.01689328804241100, -94.86873859399392500, 9.066550904854979700 ) ) ; +#2948 = CARTESIAN_POINT ( 'NONE', ( 37.22463899874275500, -97.40649683660852500, 19.21404679744339800 ) ) ; +#2949 = CARTESIAN_POINT ( 'NONE', ( 4.638962455261674800, -7.745554263288550300, -26.21788207784175700 ) ) ; +#2950 = ADVANCED_FACE ( 'NONE', ( #5627 ), #10723, .T. ) ; +#2951 = CARTESIAN_POINT ( 'NONE', ( 6.805108959841594400, -29.30185407613202700, 23.68282658649043200 ) ) ; +#2952 = CARTESIAN_POINT ( 'NONE', ( 32.05501925562042900, -30.80206373925051000, 27.68373963657954600 ) ) ; +#2953 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#2954 = CARTESIAN_POINT ( 'NONE', ( 11.54279571809963500, -30.98182155195988200, 27.07269863221712200 ) ) ; +#2955 = ORIENTED_EDGE ( 'NONE', *, *, #43, .T. ) ; +#2956 = CARTESIAN_POINT ( 'NONE', ( 5.084247508052093200, -19.90807350977030100, 9.634219594891533200 ) ) ; +#2957 = CARTESIAN_POINT ( 'NONE', ( 42.94353013409190800, -9.913502153916278200, 17.07938181778797200 ) ) ; +#2958 = VERTEX_POINT ( 'NONE', #7874 ) ; +#2959 = VERTEX_POINT ( 'NONE', #11243 ) ; +#2961 = EDGE_CURVE ( 'NONE', #9162, #2182, #269, .T. ) ; +#2960 = CARTESIAN_POINT ( 'NONE', ( 33.32759163489566100, -10.62159035204824100, -25.04867640046833100 ) ) ; +#2962 = CARTESIAN_POINT ( 'NONE', ( 5.008539671093627600, -27.63193620926477200, 7.184123274770126200 ) ) ; +#2963 = CARTESIAN_POINT ( 'NONE', ( 5.223256163383305200, -17.96879140652428200, -18.22023849450456400 ) ) ; +#2964 = CARTESIAN_POINT ( 'NONE', ( 4.996595305331113400, -20.00318893423264700, -11.78001619399070400 ) ) ; +#2965 = EDGE_LOOP ( 'NONE', ( #8732, #8229, #5004, #11041 ) ) ; +#2966 = CARTESIAN_POINT ( 'NONE', ( 13.66295919418991100, -30.81210960099104000, 27.91037366513844400 ) ) ; +#2967 = EDGE_CURVE ( 'NONE', #11262, #9564, #8377, .T. ) ; +#2968 = CARTESIAN_POINT ( 'NONE', ( 10.04045916492117900, -31.14859683563681300, 26.16292287402064100 ) ) ; +#2969 = CARTESIAN_POINT ( 'NONE', ( 1.438746243984587300, -8.512248699413593300, 18.86143308127618900 ) ) ; +#2970 = CARTESIAN_POINT ( 'NONE', ( 6.050532966968412500, -30.55079519729965300, 21.46087037243998800 ) ) ; +#2971 = CARTESIAN_POINT ( 'NONE', ( 27.44440271801817800, -93.17114783913733300, 22.75320746355610900 ) ) ; +#2972 = ORIENTED_EDGE ( 'NONE', *, *, #11258, .T. ) ; +#2973 = CARTESIAN_POINT ( 'NONE', ( 6.028987713975331200, -28.89033770495574100, 21.82144240820350200 ) ) ; +#2974 = CARTESIAN_POINT ( 'NONE', ( 37.12738450414492800, -29.36037097378649800, 24.67230250839552100 ) ) ; +#2975 = CARTESIAN_POINT ( 'NONE', ( 25.02427676907573000, -28.77904418886616600, 29.18874783758642300 ) ) ; +#2976 = CARTESIAN_POINT ( 'NONE', ( 34.06265057985944400, -30.54731509231031700, 26.90512717418840100 ) ) ; +#2977 = CARTESIAN_POINT ( 'NONE', ( 38.26222343527890500, -100.0000000000000900, 18.19436829881265200 ) ) ; +#2978 = CARTESIAN_POINT ( 'NONE', ( 3.685609889480360400, -10.98988359538674500, -22.44667458957376700 ) ) ; +#2979 = ORIENTED_EDGE ( 'NONE', *, *, #287, .T. ) ; +#2980 = CARTESIAN_POINT ( 'NONE', ( 8.497304584235351400, -31.13617735352560300, 24.96846669208459700 ) ) ; +#2981 = VERTEX_POINT ( 'NONE', #5023 ) ; +#2982 = CARTESIAN_POINT ( 'NONE', ( 10.03860075118808300, -89.42430879162761000, 7.195777944474636800 ) ) ; +#2983 = CARTESIAN_POINT ( 'NONE', ( 10.02943510738492900, -9.999999999999980500, 24.99999999999999600 ) ) ; +#2984 = CARTESIAN_POINT ( 'NONE', ( -9.118769690302684900E-014, -10.00000924054635300, 7.957297531980655600 ) ) ; +#2985 = CARTESIAN_POINT ( 'NONE', ( 36.65617149004590700, -18.01237507300756800, -23.06837513076633100 ) ) ; +#2986 = EDGE_CURVE ( 'NONE', #8668, #783, #10888, .T. ) ; +#2987 = ORIENTED_EDGE ( 'NONE', *, *, #6223, .T. ) ; +#2988 = CARTESIAN_POINT ( 'NONE', ( 38.53267277663140100, -29.19749640242113400, 23.19422193383773800 ) ) ; +#2989 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -10.00000000000000000, 25.00000000000000000 ) ) ; +#2990 = CARTESIAN_POINT ( 'NONE', ( 36.07732970589452700, -30.41748735303262000, 25.80977658007633800 ) ) ; +#2991 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2992 = CARTESIAN_POINT ( 'NONE', ( 39.36203793649461600, -22.82940767507121300, -16.46250971499672000 ) ) ; +#2993 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -96.23082734599101700, 5.350767952454451600 ) ) ; +#2994 = CARTESIAN_POINT ( 'NONE', ( 38.26222343527890500, -97.40649683660852500, 18.65167288107132000 ) ) ; +#2995 = VECTOR ( 'NONE', #10586, 1000.000000000000000 ) ; +#2996 = CARTESIAN_POINT ( 'NONE', ( 14.74599086734926200, -10.00000000000000000, -31.17675479788707400 ) ) ; +#2997 = ORIENTED_EDGE ( 'NONE', *, *, #11714, .T. ) ; +#2998 = LINE ( 'NONE', #4437, #8460 ) ; +#2999 = CARTESIAN_POINT ( 'NONE', ( 6.874955164062972000, -30.81644929848357600, 23.51388122604406000 ) ) ; +#3000 = CARTESIAN_POINT ( 'NONE', ( 31.74855593214462200, -30.72469153739439200, 27.79644250293838000 ) ) ; +#3001 = CARTESIAN_POINT ( 'NONE', ( 11.52982772407529300, -30.61623051720384900, 27.16683749317926200 ) ) ; +#3002 = AXIS2_PLACEMENT_3D ( 'NONE', #11965, #2909, #7976 ) ; +#3003 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 9.500000000000000000, 22.50000000000000700 ) ) ; +#3004 = CARTESIAN_POINT ( 'NONE', ( 8.765872030934003700, -12.49999999999999100, -15.80766412484482200 ) ) ; +#3005 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999998200, -97.35820291738771500, 15.16587576123124500 ) ) ; +#3006 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000002100, -27.09143239524033200, 6.754920151478382100 ) ) ; +#3007 = CARTESIAN_POINT ( 'NONE', ( 12.34628625564431000, -100.0000000000000300, 3.973589276607464100 ) ) ; +#3008 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375500, -30.82654731344969400, 27.93780948130441300 ) ) ; +#3009 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3010 = CARTESIAN_POINT ( 'NONE', ( 20.18719383516403500, -30.22505362207422400, 26.39521083043857200 ) ) ; +#3011 = LINE ( 'NONE', #5391, #11135 ) ; +#3012 = CARTESIAN_POINT ( 'NONE', ( 9.956767334100071300, -30.60880397659841600, 26.40280548676590300 ) ) ; +#3013 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3014 = VERTEX_POINT ( 'NONE', #12211 ) ; +#3015 = CARTESIAN_POINT ( 'NONE', ( 40.44242981426356200, -12.41238224232542600, -22.54574911742213000 ) ) ; +#3016 = CARTESIAN_POINT ( 'NONE', ( 44.09157152587820900, -8.452784834690840300, 16.38149653183798200 ) ) ; +#3017 = CARTESIAN_POINT ( 'NONE', ( 5.329180217980654000, -30.20766334328130800, 21.65298176566060600 ) ) ; +#3018 = CARTESIAN_POINT ( 'NONE', ( 37.46031276536191300, -30.36678806392253100, 24.84598523080383000 ) ) ; +#3019 = CARTESIAN_POINT ( 'NONE', ( 40.37392192486279200, -30.00608720435154500, 21.55730817466626100 ) ) ; +#3020 = ADVANCED_FACE ( 'NONE', ( #5304 ), #8571, .F. ) ; +#3021 = CARTESIAN_POINT ( 'NONE', ( 34.03968764676967900, -31.01848088975349400, 26.77271007511041000 ) ) ; +#3022 = CARTESIAN_POINT ( 'NONE', ( 32.66738833809555600, -28.70989459183556400, 27.66491212176890000 ) ) ; +#3023 = FACE_OUTER_BOUND ( 'NONE', #650, .T. ) ; +#3024 = CARTESIAN_POINT ( 'NONE', ( 38.50353618480757200, -100.0000000000000900, 18.05877560996898300 ) ) ; +#3025 = CARTESIAN_POINT ( 'NONE', ( 8.293084960839056700, -10.27107905349999900, -24.99999999999999300 ) ) ; +#3026 = CARTESIAN_POINT ( 'NONE', ( 8.281784183746770700, -30.30039862685121900, 25.38954999360972000 ) ) ; +#3027 = CARTESIAN_POINT ( 'NONE', ( 9.660518664163309000, -10.52709703467930400, 24.90705857133462000 ) ) ; +#3028 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -8.819658136626509700, 8.000759487663348300 ) ) ; +#3029 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999999300, -8.819620270636885800, -11.52528141639387700 ) ) ; +#3030 = CARTESIAN_POINT ( 'NONE', ( 39.72886108201404900, -28.55475341078040700, 23.68146251458972900 ) ) ; +#3031 = CARTESIAN_POINT ( 'NONE', ( 38.91386637645553700, -30.36879340402236200, 23.06694227022093100 ) ) ; +#3032 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5363, #11475, #6399, #354, #7451, #1342, #8484, #2341, #9485, #3364 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( -3.495013462372083800E-005, 0.0008830280581498282700, 0.001801006250923377500, 0.002718984443696926700, 0.003636962636470475800 ), + .UNSPECIFIED. ) ; +#3033 = CARTESIAN_POINT ( 'NONE', ( 44.47213083400070100, -11.05573833199855800, -11.53187062880260200 ) ) ; +#3034 = CIRCLE ( 'NONE', #2190, 1.200000000000005700 ) ; +#3035 = CARTESIAN_POINT ( 'NONE', ( 35.91937263663202600, -31.16752622808642700, 25.44698843099337500 ) ) ; +#3036 = CARTESIAN_POINT ( 'NONE', ( 39.90739219444204600, -20.08915726345216200, -13.31070207881796100 ) ) ; +#3037 = ORIENTED_EDGE ( 'NONE', *, *, #7844, .F. ) ; +#3038 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -92.96541870104319100, 0.9151443176048891200 ) ) ; +#3039 = CARTESIAN_POINT ( 'NONE', ( 38.50353618480757200, -97.40649683660852500, 18.51608019222765500 ) ) ; +#3040 = CARTESIAN_POINT ( 'NONE', ( 5.812224402195726100, -11.67898559220690800, -25.00000000000572700 ) ) ; +#3041 = CARTESIAN_POINT ( 'NONE', ( 4.163336342344337000E-014, -9.999999999999998200, -11.53187062879840900 ) ) ; +#3042 = CARTESIAN_POINT ( 'NONE', ( 6.598687374268087600, -29.74849322103073100, 23.88264503000508300 ) ) ; +#3043 = FACE_OUTER_BOUND ( 'NONE', #6364, .T. ) ; +#3044 = CARTESIAN_POINT ( 'NONE', ( 31.74729679997338700, -30.79352167926185000, 27.78642956487113100 ) ) ; +#3045 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999997300, -95.07596123493894400, 0.8682408883346195400 ) ) ; +#3046 = CARTESIAN_POINT ( 'NONE', ( 11.74380916936453000, -31.01909670537546800, 27.14742527088121800 ) ) ; +#3047 = CARTESIAN_POINT ( 'NONE', ( 28.25833234292395000, -100.0000000000000100, -37.93648162946809800 ) ) ; +#3048 = CARTESIAN_POINT ( 'NONE', ( 16.74162024121888900, -12.49999999999999300, -22.50798335587224500 ) ) ; +#3049 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3050 = CARTESIAN_POINT ( 'NONE', ( 40.61594586072922700, -17.94419622200488700, -15.73202782350075200 ) ) ; +#3051 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344969800, 27.93780948130441300 ) ) ; +#3052 = CARTESIAN_POINT ( 'NONE', ( 40.61392511215840500, -18.77214977568307900, -9.825430572506830300 ) ) ; +#3053 = CARTESIAN_POINT ( 'NONE', ( 44.92214158203962200, 10.13070237256533100, -0.7097654561682703600 ) ) ; +#3054 = CARTESIAN_POINT ( 'NONE', ( 10.03646532128772200, -29.93514766798382400, 26.38379792318012900 ) ) ; +#3055 = LINE ( 'NONE', #11088, #8513 ) ; +#3056 = CARTESIAN_POINT ( 'NONE', ( 37.18671926839812200, -100.0000000000000300, -3.238776261381156800 ) ) ; +#3057 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, 51.02052347080197600, 20.52816548656996100 ) ) ; +#3058 = CARTESIAN_POINT ( 'NONE', ( 43.69983364456683000, -8.366670019616933000, 18.62556400664860200 ) ) ; +#3059 = CARTESIAN_POINT ( 'NONE', ( 5.636289828177527100, -29.07588202102643000, 21.85190572191552900 ) ) ; +#3060 = CARTESIAN_POINT ( 'NONE', ( 37.11292342871364300, -31.10694065723185600, 24.34872611649264600 ) ) ; +#3061 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #10380, #9370, #13027 ), + ( #11403, #5284, #12377 ), + ( #6324, #271, #7376 ), + ( #1274, #8404, #2273 ), + ( #9420, #3295, #10426 ), + ( #4299, #11449, #5330 ), + ( #12418, #6368, #321 ), + ( #7423, #1317, #8453 ), + ( #2316, #9460, #3338 ), + ( #10472, #4510, #11661 ), + ( #5562, #12623, #6593 ), + ( #532, #7643, #1528 ), + ( #8670, #2530, #9674 ), + ( #3545, #10679, #4558 ), + ( #11702, #5600, #12666 ), + ( #6645, #566, #7683 ), + ( #1578, #8710, #2574 ), + ( #9714, #3593, #10717 ), + ( #4604, #11741, #5647 ), + ( #12703, #6687, #611 ), + ( #7725, #1616, #8756 ), + ( #2613, #9754, #3640 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -6.391481034870240400E-005, 6.430090223025493400E-006, 7.677499079475339100E-005, 0.0002174647919382091900, 0.0004988443942251207800, 0.001061603598798944000, 0.002187122007946590100, 0.003312640417094236300, 0.004438158826241882400, 0.006689195644537175600, 0.008940232462832467900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9732350183089765200, 1.000000000000000000), + ( 1.000000000000000000, 0.9732408132747865100, 1.000000000000000000), + ( 1.000000000000000000, 0.9732434934267439900, 1.000000000000000000), + ( 1.000000000000000000, 0.9732572447553751200, 1.000000000000000000), + ( 1.000000000000000000, 0.9732633060761776100, 1.000000000000000000), + ( 1.000000000000000000, 0.9732790593572245900, 1.000000000000000000), + ( 1.000000000000000000, 0.9732863206162585300, 1.000000000000000000), + ( 1.000000000000000000, 0.9732984809452714900, 1.000000000000000000), + ( 1.000000000000000000, 0.9732937563629743300, 1.000000000000000000), + ( 1.000000000000000000, 0.9732418907621258600, 1.000000000000000000), + ( 1.000000000000000000, 0.9731570558486906100, 1.000000000000000000), + ( 1.000000000000000000, 0.9727582924697193400, 1.000000000000000000), + ( 1.000000000000000000, 0.9723000894282236600, 1.000000000000000000), + ( 1.000000000000000000, 0.9710343076836940300, 1.000000000000000000), + ( 1.000000000000000000, 0.9702200942789100900, 1.000000000000000000), + ( 1.000000000000000000, 0.9683261471392468100, 1.000000000000000000), + ( 1.000000000000000000, 0.9672551803612894300, 1.000000000000000000), + ( 1.000000000000000000, 0.9637637757940210600, 1.000000000000000000), + ( 1.000000000000000000, 0.9610684524478134700, 1.000000000000000000), + ( 1.000000000000000000, 0.9552746423824745000, 1.000000000000000000), + ( 1.000000000000000000, 0.9522292435975219200, 1.000000000000000000), + ( 1.000000000000000000, 0.9491930540946087500, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3062 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1811, #7936, #4862, #11971 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 3.141592653589793100, 3.816724186526824400 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9623757713646635700, 0.9623757713646635700, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#3063 = EDGE_CURVE ( 'NONE', #5941, #7944, #6165, .T. ) ; +#3064 = CARTESIAN_POINT ( 'NONE', ( 33.85479020904160300, -30.37777177733893600, 27.00442838232646600 ) ) ; +#3065 = CARTESIAN_POINT ( 'NONE', ( 34.04554743667375000, -20.56720405136083200, 20.05766825627362900 ) ) ; +#3066 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #7640, #153, ( #398 ) ) ; +#3067 = CARTESIAN_POINT ( 'NONE', ( 4.557570185731827400, -12.41238224231885200, -22.54574911742101400 ) ) ; +#3068 = CARTESIAN_POINT ( 'NONE', ( 8.507316364393020100, -29.49684768757349900, 25.24454616093596500 ) ) ; +#3069 = CARTESIAN_POINT ( 'NONE', ( 45.40708555024041700, -7.640324711596806000, -17.36404879104317400 ) ) ; +#3070 = CARTESIAN_POINT ( 'NONE', ( 0.5292475028893475200, -11.05468373160909900, 8.247178575582642800 ) ) ; +#3071 = CARTESIAN_POINT ( 'NONE', ( 44.47309932946149800, -11.04824121782007200, -11.93791037572648700 ) ) ; +#3072 = CARTESIAN_POINT ( 'NONE', ( 36.48479108371288500, -31.61998521982823400, 23.27373466633773800 ) ) ; +#3073 = CARTESIAN_POINT ( 'NONE', ( 38.20834669143194200, -29.07218848301802800, 23.35062433106967500 ) ) ; +#3074 = CARTESIAN_POINT ( 'NONE', ( 44.47605513024000600, -11.05210832004667600, -12.41381754192294000 ) ) ; +#3075 = FACE_OUTER_BOUND ( 'NONE', #265, .T. ) ; +#3076 = CARTESIAN_POINT ( 'NONE', ( 35.87653089208365000, -30.22403037968335600, 25.93883502322185200 ) ) ; +#3077 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, 10.00000000000000000, 25.00000000000000400 ) ) ; +#3078 = CARTESIAN_POINT ( 'NONE', ( 41.05233342133935500, -17.90211532424707400, -11.75852258135286200 ) ) ; +#3079 = CARTESIAN_POINT ( 'NONE', ( 28.94050684943296400, -19.16013173760785200, 22.88708557636566700 ) ) ; +#3080 = CARTESIAN_POINT ( 'NONE', ( 6.670289409694445800, -20.40261358042192800, -18.66584241384703100 ) ) ; +#3081 = CARTESIAN_POINT ( 'NONE', ( 7.176823010909990900, -30.99651512685919000, 23.54248360917399900 ) ) ; +#3082 = CARTESIAN_POINT ( 'NONE', ( 4.188356332168537800, -11.36381286023996200, -22.85393323805441700 ) ) ; +#3083 = CARTESIAN_POINT ( 'NONE', ( 31.74850174763942000, -30.87203550277104800, 27.77057250916819300 ) ) ; +#3084 = CARTESIAN_POINT ( 'NONE', ( 0.7377661162125247500, -7.637954913687262400, 17.05443900557798300 ) ) ; +#3085 = CARTESIAN_POINT ( 'NONE', ( 11.72826698711884500, -30.71649504202836700, 27.23688643405071000 ) ) ; +#3086 = ORIENTED_EDGE ( 'NONE', *, *, #12283, .T. ) ; +#3087 = CARTESIAN_POINT ( 'NONE', ( 36.23394150420018900, -100.0000000000000100, -31.23633444691232700 ) ) ; +#3088 = CARTESIAN_POINT ( 'NONE', ( 33.73656361944284800, -12.98538723093377800, 24.47359568332386800 ) ) ; +#3089 = LINE ( 'NONE', #11542, #5476 ) ; +#3090 = CARTESIAN_POINT ( 'NONE', ( 44.46685913795350600, -10.95745810339853500, -13.28637981150273200 ) ) ; +#3091 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 3.469446951953615200E-016, -1.000000000000000000 ) ) ; +#3092 = CARTESIAN_POINT ( 'NONE', ( 10.35705097196075600, -30.81370661007412100, 26.55037491743347600 ) ) ; +#3093 = CARTESIAN_POINT ( 'NONE', ( 34.96242584221889200, -12.50000000000001100, 17.02867075311040800 ) ) ; +#3094 = CARTESIAN_POINT ( 'NONE', ( 1.940943722113889000, -9.864517183963140900, -20.41630470297612700 ) ) ; +#3095 = CARTESIAN_POINT ( 'NONE', ( 42.07390913775462600, -10.73616710076841600, 17.81950147748811000 ) ) ; +#3096 = EDGE_LOOP ( 'NONE', ( #1226, #1407, #4046, #1858 ) ) ; +#3097 = CARTESIAN_POINT ( 'NONE', ( 5.910205430264216600, -30.52937560947270500, 21.71238132177033000 ) ) ; +#3098 = CARTESIAN_POINT ( 'NONE', ( 25.88675710619974900, -19.13122618060680200, 23.39926757445047700 ) ) ; +#3099 = CARTESIAN_POINT ( 'NONE', ( 37.26497432714235500, -30.14646951289849500, 25.01141395015467900 ) ) ; +#3100 = VERTEX_POINT ( 'NONE', #3438 ) ; +#3101 = CARTESIAN_POINT ( 'NONE', ( 5.043683556552197800, -28.01126083081911800, 13.03094497276235600 ) ) ; +#3102 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #673, #4713, #9859, #3729, #10864, #4758, #11879, #5793, #12837, #6840 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( -6.000000000102163500E-008, 0.001582585301710965500, 0.003165230603421932000, 0.004747875905132897800, 0.006330521206843864500 ), + .UNSPECIFIED. ) ; +#3103 = CARTESIAN_POINT ( 'NONE', ( 33.86220663055357200, -30.82852679484416200, 26.94134721152798700 ) ) ; +#3104 = CARTESIAN_POINT ( 'NONE', ( 34.71655355009707500, -26.83654946842603900, 18.49332059384424900 ) ) ; +#3105 = CARTESIAN_POINT ( 'NONE', ( 9.948843947849097100, -13.10300255354869700, -24.99999999999999300 ) ) ; +#3106 = ORIENTED_EDGE ( 'NONE', *, *, #1351, .T. ) ; +#3107 = VERTEX_POINT ( 'NONE', #3356 ) ; +#3108 = CARTESIAN_POINT ( 'NONE', ( 8.564630735519521900, -30.54578373898354100, 25.52850155977866100 ) ) ; +#3109 = CARTESIAN_POINT ( 'NONE', ( 24.78956190696850500, -7.494147448148535100, -33.02514502881594200 ) ) ; +#3110 = CARTESIAN_POINT ( 'NONE', ( -2.919934288632524000E-013, -9.951714170608102700, 9.047671162466898000 ) ) ; +#3111 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000386500, -9.875776459097954400, -13.19339851166427000 ) ) ; +#3112 = CARTESIAN_POINT ( 'NONE', ( 31.66265809119771300, -30.78559131984300400, 27.85752956921567100 ) ) ; +#3113 = VERTEX_POINT ( 'NONE', #3289 ) ; +#3114 = CARTESIAN_POINT ( 'NONE', ( 38.85769620672551400, -30.08109775278967000, 23.40422818335726500 ) ) ; +#3115 = CARTESIAN_POINT ( 'NONE', ( 44.42489605756841800, -10.59919427021957700, -15.00275674467592100 ) ) ; +#3116 = VERTEX_POINT ( 'NONE', #3481 ) ; +#3117 = CARTESIAN_POINT ( 'NONE', ( 35.80293216100867700, -31.01549073645154700, 25.68886210346526500 ) ) ; +#3118 = CARTESIAN_POINT ( 'NONE', ( 11.31759417330911800, -11.25993443329938500, -25.06346703222441600 ) ) ; +#3119 = CARTESIAN_POINT ( 'NONE', ( 39.99580547585747300, -22.32988307896938800, -11.58248355134173800 ) ) ; +#3120 = ORIENTED_EDGE ( 'NONE', *, *, #1220, .F. ) ; +#3121 = CARTESIAN_POINT ( 'NONE', ( 36.89396291115618000, -31.12698883501383700, 24.56830049738751900 ) ) ; +#3122 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -95.07596123493894400, 22.49881262457338200 ) ) ; +#3123 = CARTESIAN_POINT ( 'NONE', ( 34.02669195967953900, -16.84831001779610900, -24.88523528509203000 ) ) ; +#3124 = CARTESIAN_POINT ( 'NONE', ( 6.689902694388739400, -30.10014805773931800, 24.08892706649820400 ) ) ; +#3125 = CARTESIAN_POINT ( 'NONE', ( 43.94594882561542400, -7.268690941770664400, 18.13960818545848100 ) ) ; +#3126 = CARTESIAN_POINT ( 'NONE', ( 31.64485387631525600, -30.78094396609619900, 27.82117230378947100 ) ) ; +#3127 = CARTESIAN_POINT ( 'NONE', ( 1.709202867318757900E-012, -5.507027579152129700, 16.45102559132113700 ) ) ; +#3128 = CARTESIAN_POINT ( 'NONE', ( 11.74376609412192900, -30.37580714795977200, 27.26095719274322000 ) ) ; +#3129 = CARTESIAN_POINT ( 'NONE', ( 30.37349994138840600, -16.63508298937611600, 23.83005584973326000 ) ) ; +#3130 = ORIENTED_EDGE ( 'NONE', *, *, #9725, .T. ) ; +#3131 = EDGE_CURVE ( 'NONE', #3100, #3193, #3774, .T. ) ; +#3132 = EDGE_LOOP ( 'NONE', ( #2325, #2628, #3425, #3881 ) ) ; +#3133 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#3134 = CARTESIAN_POINT ( 'NONE', ( 3.276721011745474600, -9.693645654354504900, 22.49999999999997900 ) ) ; +#3135 = CARTESIAN_POINT ( 'NONE', ( 12.67828621111028500, -100.0000000000000300, 4.226339706232132600 ) ) ; +#3136 = ORIENTED_EDGE ( 'NONE', *, *, #6894, .T. ) ; +#3137 = CARTESIAN_POINT ( 'NONE', ( 46.49775852953271700, -12.60125871759967200, -22.99999999999996100 ) ) ; +#3138 = CARTESIAN_POINT ( 'NONE', ( 4.429632822267916700, -11.77005315312230000, 19.21086510387536400 ) ) ; +#3139 = EDGE_CURVE ( 'NONE', #9498, #7655, #10424, .T. ) ; +#3140 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -31.29892962639993600, 28.74442404665491300 ) ) ; +#3141 = AXIS2_PLACEMENT_3D ( 'NONE', #11559, #4414, #2418 ) ; +#3142 = CARTESIAN_POINT ( 'NONE', ( 10.37269670281282600, -30.22538425945568700, 26.62454936875675300 ) ) ; +#3143 = CARTESIAN_POINT ( 'NONE', ( 31.30424908285672800, -100.0000000000000300, 4.900729108231342200 ) ) ; +#3144 = CARTESIAN_POINT ( 'NONE', ( 40.69828701959324500, -10.14552209738076800, 20.48183825822900100 ) ) ; +#3145 = CARTESIAN_POINT ( 'NONE', ( 5.141153891995433200, -29.47777020249511200, 21.89152984679654800 ) ) ; +#3146 = CARTESIAN_POINT ( 'NONE', ( 7.646596040445937900, -14.46251538580834700, -24.99999999999434400 ) ) ; +#3147 = AXIS2_PLACEMENT_3D ( 'NONE', #1547, #7660, #8729 ) ; +#3148 = CARTESIAN_POINT ( 'NONE', ( 36.99687183133512700, -31.06981554001038500, 24.55248734201450800 ) ) ; +#3149 = ORIENTED_EDGE ( 'NONE', *, *, #2986, .F. ) ; +#3150 = PERSON_AND_ORGANIZATION ( #10194, #1109 ) ; +#3151 = ADVANCED_FACE ( 'NONE', ( #2599 ), #12728, .F. ) ; +#3152 = CARTESIAN_POINT ( 'NONE', ( 33.74386026139306700, -30.25984369667932200, 27.04363800637644000 ) ) ; +#3153 = CARTESIAN_POINT ( 'NONE', ( 39.55226933084342300, -28.76919807924765800, 19.52369139871596100 ) ) ; +#3154 = CARTESIAN_POINT ( 'NONE', ( 38.74309991432515700, -100.0000000000000900, 17.91936059322281200 ) ) ; +#3155 = CARTESIAN_POINT ( 'NONE', ( 6.376363726494935800, -15.23451195628880100, -22.77743429939926800 ) ) ; +#3156 = CARTESIAN_POINT ( 'NONE', ( 8.727225817965681600, -29.62297115614766300, 25.47074773024809200 ) ) ; +#3157 = CARTESIAN_POINT ( 'NONE', ( 34.58730084118386100, -7.707617110150668100, -30.60411801834678500 ) ) ; +#3158 = CARTESIAN_POINT ( 'NONE', ( 1.457167719820518000E-013, -8.265510080976202500, 10.95781967062182000 ) ) ; +#3159 = ORIENTED_EDGE ( 'NONE', *, *, #11457, .T. ) ; +#3160 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999996400, -8.011577269714438300, -15.13409160104448000 ) ) ; +#3161 = CARTESIAN_POINT ( 'NONE', ( 26.42756766868890800, -33.13796828529599000, 28.38544437411350100 ) ) ; +#3162 = EDGE_CURVE ( 'NONE', #216, #6124, #2291, .T. ) ; +#3163 = CARTESIAN_POINT ( 'NONE', ( 38.20699274172195500, -30.90705493857592500, 23.02688050861607700 ) ) ; +#3164 = CIRCLE ( 'NONE', #9565, 2.500000000000000900 ) ; +#3165 = ORIENTED_EDGE ( 'NONE', *, *, #12434, .T. ) ; +#3166 = CARTESIAN_POINT ( 'NONE', ( 35.71479602423710300, -29.90155131674186600, 25.94995429000870100 ) ) ; +#3167 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3168 = DIRECTION ( 'NONE', ( 0.8309840000610009300, 0.5562963164021658100, 0.0000000000000000000 ) ) ; +#3169 = CARTESIAN_POINT ( 'NONE', ( 36.97057334624226100, -31.12026102382241200, 24.49202000664479300 ) ) ; +#3170 = CARTESIAN_POINT ( 'NONE', ( 10.79367781607085400, -14.50880408394650300, -24.99999999999997500 ) ) ; +#3171 = CARTESIAN_POINT ( 'NONE', ( 34.73601442445875900, -19.09700290772985900, -24.17286743212384100 ) ) ; +#3172 = CARTESIAN_POINT ( 'NONE', ( 7.177928700871798500, -29.16225817331339000, 23.86505612589452200 ) ) ; +#3173 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000700, -8.819930997995109900, 7.939828001495358800 ) ) ; +#3174 = CARTESIAN_POINT ( 'NONE', ( 31.64521063886546800, -30.84406209654671500, 27.80968369338538400 ) ) ; +#3175 = CARTESIAN_POINT ( 'NONE', ( 36.82936195849060800, -8.975182257297493700, 25.00000000000000000 ) ) ; +#3176 = CARTESIAN_POINT ( 'NONE', ( 11.82998328778624900, -30.80720974473452500, 27.25902970717254800 ) ) ; +#3177 = FACE_OUTER_BOUND ( 'NONE', #3644, .T. ) ; +#3178 = CARTESIAN_POINT ( 'NONE', ( 28.11970165966273100, -18.26109967208782000, 23.54334523748911700 ) ) ; +#3179 = CARTESIAN_POINT ( 'NONE', ( 38.94130634943902400, -28.87894815001179400, 21.82387652151162200 ) ) ; +#3180 = CARTESIAN_POINT ( 'NONE', ( 41.05018658645033000, -17.89962682709925800, -11.53187062879840300 ) ) ; +#3181 = CARTESIAN_POINT ( 'NONE', ( 44.46901882097750300, -11.05015112314941900, 8.462133716777261200 ) ) ; +#3182 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -7.395277334996141100, 10.22788370481686300 ) ) ; +#3183 = CARTESIAN_POINT ( 'NONE', ( 34.12181433788313000, -11.33113675805105600, -24.99999999999770800 ) ) ; +#3184 = CARTESIAN_POINT ( 'NONE', ( 14.34657918575581800, -30.65936817455452300, 28.13757725071987200 ) ) ; +#3185 = CARTESIAN_POINT ( 'NONE', ( 10.57782850541135900, -31.03696174984850500, 26.55963157888145100 ) ) ; +#3186 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000009200, -12.50000000000001100, 22.05918254822885800 ) ) ; +#3187 = CARTESIAN_POINT ( 'NONE', ( 39.72490711745967200, -11.10308436357684100, -23.97888496023545500 ) ) ; +#3188 = CARTESIAN_POINT ( 'NONE', ( 40.54350290419009900, -9.996933349001095000, 24.74088781402414500 ) ) ; +#3189 = FACE_OUTER_BOUND ( 'NONE', #9079, .T. ) ; +#3190 = CARTESIAN_POINT ( 'NONE', ( 6.119725550673165600, -30.62098289137911800, 21.75529100945013600 ) ) ; +#3191 = CARTESIAN_POINT ( 'NONE', ( 8.590946704472358400, -15.83891505308254800, -25.00000000019251400 ) ) ; +#3192 = CARTESIAN_POINT ( 'NONE', ( 36.80873363856927900, -29.83967089173528500, 25.22918325405927200 ) ) ; +#3193 = VERTEX_POINT ( 'NONE', #12969 ) ; +#3194 = EDGE_LOOP ( 'NONE', ( #9841, #9965 ) ) ; +#3195 = CARTESIAN_POINT ( 'NONE', ( 40.37392192486304100, -26.78030714898307700, 6.717882004940185500 ) ) ; +#3196 = CARTESIAN_POINT ( 'NONE', ( 33.76824676604236000, -30.69930046871904100, 27.02050077620576500 ) ) ; +#3197 = CARTESIAN_POINT ( 'NONE', ( 39.03930815960156100, -23.48533704400378500, 12.81403097000211700 ) ) ; +#3198 = CARTESIAN_POINT ( 'NONE', ( 37.03372931163774200, -31.11409159612471200, 24.42776639286862300 ) ) ; +#3199 = CARTESIAN_POINT ( 'NONE', ( 7.321072304285191700, -16.63521403716209000, -22.90944221827242800 ) ) ; +#3200 = CARTESIAN_POINT ( 'NONE', ( 8.715683769279701600, -30.85900703469896900, 25.45434458883684700 ) ) ; +#3201 = CARTESIAN_POINT ( 'NONE', ( 42.09189930816560100, -10.00000000000000000, -22.16994175235306500 ) ) ; +#3202 = CARTESIAN_POINT ( 'NONE', ( 0.9343192557405887200, -8.255855776600579800, 16.72833330632481700 ) ) ; +#3203 = CARTESIAN_POINT ( 'NONE', ( 44.06745856776413500, -7.644180264799896200, -20.79684225591412900 ) ) ; +#3204 = CARTESIAN_POINT ( 'NONE', ( 38.53625037759839200, -29.85282308515469300, 23.78114123895423400 ) ) ; +#3205 = CIRCLE ( 'NONE', #3422, 2.500000000000002700 ) ; +#3206 = CARTESIAN_POINT ( 'NONE', ( 35.78522708649892100, -30.71419174960923500, 25.91364755228614000 ) ) ; +#3207 = CARTESIAN_POINT ( 'NONE', ( 43.00000000000000000, 0.0000000000000000000, -23.00000000000000000 ) ) ; +#3208 = CARTESIAN_POINT ( 'NONE', ( 26.19144541314742000, -94.71799171679907700, 18.78817770573255800 ) ) ; +#3209 = ORIENTED_EDGE ( 'NONE', *, *, #4411, .T. ) ; +#3210 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000000, -20.68999999999999400 ) ) ; +#3211 = CARTESIAN_POINT ( 'NONE', ( 11.67447039237109000, -15.89296508247142700, -24.99999999999997500 ) ) ; +#3212 = CARTESIAN_POINT ( 'NONE', ( 24.85454854623588600, -32.13578828253771700, 21.09686328653844700 ) ) ; +#3213 = ADVANCED_FACE ( 'NONE', ( #10095 ), #7731, .T. ) ; +#3214 = CARTESIAN_POINT ( 'NONE', ( 6.805285264057402200, -30.37719212520011800, 24.11244609827968000 ) ) ; +#3215 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999992900, -6.252132021771897600, 17.24451354035096200 ) ) ; +#3216 = CARTESIAN_POINT ( 'NONE', ( 31.44000030325894100, -30.79141696269045200, 27.88292562076415500 ) ) ; +#3217 = CARTESIAN_POINT ( 'NONE', ( 43.24887926476636600, -8.800629358799827900, -22.99999999999995700 ) ) ; +#3218 = CARTESIAN_POINT ( 'NONE', ( 11.83691312748715100, -30.47262022242424400, 27.30163647085873900 ) ) ; +#3219 = FACE_OUTER_BOUND ( 'NONE', #8693, .T. ) ; +#3220 = CARTESIAN_POINT ( 'NONE', ( 39.99999319098549900, -29.66368374314378200, 21.68613441357378200 ) ) ; +#3221 = CARTESIAN_POINT ( 'NONE', ( 44.15492000030769800, -7.781481582006808400, -21.43596316074798800 ) ) ; +#3222 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #846, #284, #255, #240, #193, #147, #100, #57, #4539, #4457, #4419, #12, #10663, #9658, #3451, #9576, #2426, #8570, #1434, #7546, #435, #6495, #12534, #5458, #11566, #4422, #10544, #3407, #9536, #2390, #8528, #1395, #7503, #400, #6449, #12496, #5417, #11523, #4374, #10507, #3370, #9493, #2350, #8490, #1350, #7460, #361, #6405, #12449, #5373, #11483, #4329, #10461, #3328, #9449, #2305, #8445, #1308, #7413, #308, #6357, #12409, #5321, #11439, #4291, #10415, #3284, #9410, #2267, #8393, #1265, #7367, #259, #6314, #12367, #5272, #11393, #4249, #10370, #3233, #9359, #2221, #8348, #1219, #7322, #218, #6265 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 1, 1, 1, 1, 2, 2, 2, 2, 1, 1, 1, 2, 2, 2, 2, 1, 1, 1, 1, 2, 2, 2, 2, 1, 1, 1, 2, 2, 2, 2, 1, 1, 2, 2, 2, 2, 1, 1, 2, 2, 2, 2, 1, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.03124999999999425500, 0.04687499999999136800, 0.05468749999999005700, 0.05859374999998941100, 0.06054687499998904300, 0.06152343749998883500, 0.06201171874998873100, 0.06249999999998863400, 0.09374999999998368000, 0.1093749999999812100, 0.1171874999999801500, 0.1210937499999796300, 0.1230468749999792400, 0.1240234374999790200, 0.1249999999999787900, 0.1874999999999714700, 0.2187499999999678000, 0.2343749999999658100, 0.2421874999999648300, 0.2460937499999643900, 0.2480468749999641700, 0.2490234374999639500, 0.2499999999999637500, 0.3124999999999645800, 0.3437499999999649700, 0.3593749999999650300, 0.3671874999999649700, 0.3710937499999651400, 0.3730468749999653600, 0.3749999999999656400, 0.4374999999999767400, 0.4687499999999823500, 0.4843749999999850700, 0.4921874999999865700, 0.4960937499999874500, 0.4999999999999883400, 0.5624999999999982200, 0.5937500000000028900, 0.6093750000000050000, 0.6171875000000063300, 0.6210937500000066600, 0.6250000000000071100, 0.6875000000000060000, 0.7187500000000060000, 0.7343750000000055500, 0.7421875000000053300, 0.7500000000000051100, 0.8125000000000044400, 0.8437500000000040000, 0.8593750000000036600, 0.8750000000000033300, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#3223 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3224 = CARTESIAN_POINT ( 'NONE', ( 19.96564409268271600, -19.87368981056682700, 23.25900208725088400 ) ) ; +#3225 = CARTESIAN_POINT ( 'NONE', ( 10.54434362633880800, -30.50054643912331200, 26.72042030968594500 ) ) ; +#3226 = CARTESIAN_POINT ( 'NONE', ( 27.11457340656019700, -94.74682992296710900, 18.71443453778742200 ) ) ; +#3227 = CARTESIAN_POINT ( 'NONE', ( 35.49372860209995700, -12.45743782775403700, 23.73587515475126600 ) ) ; +#3228 = CARTESIAN_POINT ( 'NONE', ( 5.056571344088054000, -29.82101643807932900, 21.88484777848597700 ) ) ; +#3229 = CIRCLE ( 'NONE', #6934, 3.189999999999995100 ) ; +#3230 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999992200, -4.964027480983524800, 16.11031909857698000 ) ) ; +#3231 = CARTESIAN_POINT ( 'NONE', ( 42.09189930816555100, -9.999999999999992900, 18.64340213818401200 ) ) ; +#3232 = CARTESIAN_POINT ( 'NONE', ( 36.80875841159965500, -30.82747417832082300, 25.05500476753571700 ) ) ; +#3233 = CARTESIAN_POINT ( 'NONE', ( 28.87673255508338600, -19.16116505121350500, 22.86924281350598800 ) ) ; +#3234 = EDGE_CURVE ( 'NONE', #2313, #569, #1454, .T. ) ; +#3235 = CARTESIAN_POINT ( 'NONE', ( 33.74261234485496900, -31.06352398685093900, 26.89914956106822800 ) ) ; +#3236 = CARTESIAN_POINT ( 'NONE', ( 39.99999999994417300, -26.90723187352096700, 7.764637101415237600 ) ) ; +#3237 = CARTESIAN_POINT ( 'NONE', ( 44.44652253924113000, -7.345891704657741000, -21.13073020918234600 ) ) ; +#3238 = ORIENTED_EDGE ( 'NONE', *, *, #12961, .T. ) ; +#3239 = ORIENTED_EDGE ( 'NONE', *, *, #1541, .T. ) ; +#3240 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -8.819645670697410000, 8.005330931324026600 ) ) ; +#3241 = CARTESIAN_POINT ( 'NONE', ( 44.85781939446115300, -9.999999999999992900, 10.79657947809077000 ) ) ; +#3242 = CARTESIAN_POINT ( 'NONE', ( 12.13023775753782200, -30.75186239724579500, 27.39478705050061400 ) ) ; +#3243 = CARTESIAN_POINT ( 'NONE', ( 8.715670628353741700, -29.94668331859234600, 25.61521929762662000 ) ) ; +#3244 = CIRCLE ( 'NONE', #8447, 2.500000000000001800 ) ; +#3245 = CARTESIAN_POINT ( 'NONE', ( 40.00008036490039800, -20.05966795021113900, -12.58913619056218100 ) ) ; +#3246 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000004400, -99.99999999999998600, -25.63802908547508300 ) ) ; +#3247 = CARTESIAN_POINT ( 'NONE', ( 4.817573417285014000, -8.798350354640170700, -24.83718540147773600 ) ) ; +#3248 = CARTESIAN_POINT ( 'NONE', ( 38.14530246411090500, -30.85004555939206800, 23.38098542050724800 ) ) ; +#3249 = ORIENTED_EDGE ( 'NONE', *, *, #3131, .T. ) ; +#3250 = AXIS2_PLACEMENT_3D ( 'NONE', #207, #12315, #10269 ) ; +#3251 = CARTESIAN_POINT ( 'NONE', ( 35.49098080457150000, -29.77194657425359000, 26.02797819758338000 ) ) ; +#3252 = CARTESIAN_POINT ( 'NONE', ( 10.04897051308951300, -97.46883387410086600, 20.20483725917268800 ) ) ; +#3253 = FACE_OUTER_BOUND ( 'NONE', #8643, .T. ) ; +#3254 = CARTESIAN_POINT ( 'NONE', ( 32.07440556482090000, -95.07596123493894400, 15.73495959795369400 ) ) ; +#3255 = CARTESIAN_POINT ( 'NONE', ( 38.74309991432515700, -97.40649683660852500, 18.37666517548148400 ) ) ; +#3256 = CARTESIAN_POINT ( 'NONE', ( 8.343828509952659900, -18.01237507300751500, -23.06837513076479600 ) ) ; +#3257 = CARTESIAN_POINT ( 'NONE', ( 28.58226110557081900, -39.22755427998820500, 19.41490025252136000 ) ) ; +#3258 = CARTESIAN_POINT ( 'NONE', ( 7.132040136368790000, -29.32365929451335200, 24.01960608730146900 ) ) ; +#3259 = CARTESIAN_POINT ( 'NONE', ( 44.00509685815725900, -7.769590221940911000, 17.45572367286713700 ) ) ; +#3260 = CARTESIAN_POINT ( 'NONE', ( 31.43943087839964800, -30.82208846122551900, 27.87781086476430300 ) ) ; +#3261 = CARTESIAN_POINT ( 'NONE', ( 44.15492000030423700, -8.389711229385806500, -19.69998625432010900 ) ) ; +#3262 = CARTESIAN_POINT ( 'NONE', ( 12.13537442277409400, -30.92393982587123700, 27.35094279949386500 ) ) ; +#3263 = CARTESIAN_POINT ( 'NONE', ( 44.88893275563954400, -6.089445707420709100, -19.78637105844045500 ) ) ; +#3264 = CARTESIAN_POINT ( 'NONE', ( 38.94313858930262000, -30.56490635441550200, 21.52652657857563800 ) ) ; +#3265 = EDGE_LOOP ( 'NONE', ( #875, #10102, #12210 ) ) ; +#3266 = VERTEX_POINT ( 'NONE', #12813 ) ; +#3267 = CARTESIAN_POINT ( 'NONE', ( 44.65474131097272400, -6.890358613494577800, -20.80214600021770700 ) ) ; +#3268 = CARTESIAN_POINT ( 'NONE', ( 12.34628625564431000, -12.49999999999999600, 19.40220008859757100 ) ) ; +#3269 = ORIENTED_EDGE ( 'NONE', *, *, #10834, .T. ) ; +#3270 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -97.51638471114853200, 22.06850012136330700 ) ) ; +#3271 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7044, #8071, #1950, #9091, #2969, #10091, #3966, #11119, #4996, #12103, #6033, #13058 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0006794712765263001900, 0.001358942553052600400, 0.002717885106105189900, 0.004076827659157780300, 0.005435770212210370300 ), + .UNSPECIFIED. ) ; +#3272 = AXIS2_PLACEMENT_3D ( 'NONE', #6754, #680, #7799 ) ; +#3273 = CARTESIAN_POINT ( 'NONE', ( 43.07585383721222200, -8.948806110675361600, 19.77628128067653200 ) ) ; +#3274 = CARTESIAN_POINT ( 'NONE', ( 10.87426597183170100, -31.09425021773504500, 26.68601237608352900 ) ) ; +#3275 = CARTESIAN_POINT ( 'NONE', ( 0.1111512165350332900, -6.089863887863960400, -19.78653654961180000 ) ) ; +#3276 = EDGE_LOOP ( 'NONE', ( #13037, #2946 ) ) ; +#3277 = CARTESIAN_POINT ( 'NONE', ( 6.117908214480796600, -28.90572289676807200, 22.05734579090837900 ) ) ; +#3278 = CARTESIAN_POINT ( 'NONE', ( 44.06567741237727600, -8.255829752554740600, 16.72837540842127900 ) ) ; +#3279 = CARTESIAN_POINT ( 'NONE', ( 24.85077160798177000, -19.12974947774603900, 23.42543349893952300 ) ) ; +#3280 = CARTESIAN_POINT ( 'NONE', ( 36.51903355883164400, -29.55931473973341600, 25.26813746234914900 ) ) ; +#3281 = ORIENTED_EDGE ( 'NONE', *, *, #5149, .T. ) ; +#3282 = ORIENTED_EDGE ( 'NONE', *, *, #864, .F. ) ; +#3283 = CARTESIAN_POINT ( 'NONE', ( 10.03613340820112000, -100.0000000000000100, 1.632021064356444600 ) ) ; +#3284 = CARTESIAN_POINT ( 'NONE', ( 33.35949215472154300, -19.27909479867821200, 20.77929258938534200 ) ) ; +#3285 = ADVANCED_FACE ( 'NONE', ( #1972 ), #7091, .F. ) ; +#3286 = CARTESIAN_POINT ( 'NONE', ( 33.56956295733335300, -30.62008591303486000, 27.12293680623571400 ) ) ; +#3287 = VERTEX_POINT ( 'NONE', #12520 ) ; +#3288 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000000, -17.49999999999999600 ) ) ; +#3289 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -97.57596123416667000, 12.92974142702268400 ) ) ; +#3290 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999997200, -9.999999999999994700, 8.005331014629273800 ) ) ; +#3291 = CARTESIAN_POINT ( 'NONE', ( 12.13820805055440600, -30.48079239863066200, 27.42167315863647700 ) ) ; +#3292 = ORIENTED_EDGE ( 'NONE', *, *, #12172, .T. ) ; +#3293 = CARTESIAN_POINT ( 'NONE', ( 8.977153665252823000, -31.11921955597325600, 25.41528406164712800 ) ) ; +#3294 = CARTESIAN_POINT ( 'NONE', ( 27.93167299501766400, -20.85358462620009600, -26.65666754469008000 ) ) ; +#3295 = CARTESIAN_POINT ( 'NONE', ( 2.279874474018649600E-014, -9.999806075341942000, -11.59931701399157500 ) ) ; +#3296 = CARTESIAN_POINT ( 'NONE', ( 38.10612374253799600, -10.18750568182625700, 25.00000000000000400 ) ) ; +#3297 = EDGE_LOOP ( 'NONE', ( #11418, #925, #1244, #3901 ) ) ; +#3298 = CARTESIAN_POINT ( 'NONE', ( 38.21468501110029300, -29.43737222696013200, 23.81705430884670000 ) ) ; +#3299 = CARTESIAN_POINT ( 'NONE', ( 39.48588941751690800, -30.30657462236113600, 21.50432319756492200 ) ) ; +#3300 = CARTESIAN_POINT ( 'NONE', ( 10.52889878037776600, -19.00812097321379200, -24.34580682404002900 ) ) ; +#3301 = CARTESIAN_POINT ( 'NONE', ( 35.61688500486398800, -30.53115427407261600, 26.09007987247709800 ) ) ; +#3302 = CARTESIAN_POINT ( 'NONE', ( 26.11422868188041900, -95.07596123493898700, 16.93028935686359700 ) ) ; +#3303 = EDGE_LOOP ( 'NONE', ( #6793, #7128, #12474, #2331 ) ) ; +#3304 = ORIENTED_EDGE ( 'NONE', *, *, #6388, .F. ) ; +#3305 = CARTESIAN_POINT ( 'NONE', ( 34.58317675093930200, -95.07596123493895800, 15.75624645114223400 ) ) ; +#3306 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3307 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, -3.189999999999994200 ) ) ; +#3308 = CARTESIAN_POINT ( 'NONE', ( 32.90206080560217600, -32.67673390148147000, 26.84857170128022500 ) ) ; +#3309 = ORIENTED_EDGE ( 'NONE', *, *, #7921, .T. ) ; +#3310 = CARTESIAN_POINT ( 'NONE', ( 7.101238964681268600, -30.76845381262916800, 23.97807937863140300 ) ) ; +#3311 = CARTESIAN_POINT ( 'NONE', ( 45.00000000004745000, -6.744552458091744600, 16.60407231984764900 ) ) ; +#3312 = CARTESIAN_POINT ( 'NONE', ( 31.33717021065836400, -30.80702147968168000, 27.91122696787383000 ) ) ; +#3313 = CARTESIAN_POINT ( 'NONE', ( 17.29571391213990600, -31.19292489269765100, 28.63912613730807200 ) ) ; +#3314 = CARTESIAN_POINT ( 'NONE', ( 38.14980905510477500, -12.59340683484168500, 21.43086125037502800 ) ) ; +#3315 = CARTESIAN_POINT ( 'NONE', ( 39.76753461554669400, -29.32998097541846500, 21.80821307284338000 ) ) ; +#3316 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -1.972066022637282400, 11.18414218126905600 ) ) ; +#3317 = CARTESIAN_POINT ( 'NONE', ( 12.67828621111028500, -12.49999999999999600, 19.65495051822224000 ) ) ; +#3318 = VECTOR ( 'NONE', #6500, 1000.000000000000000 ) ; +#3319 = DIRECTION ( 'NONE', ( -0.8210641649044780900, 0.0000000000000000000, 0.5708359108445366600 ) ) ; +#3320 = EDGE_CURVE ( 'NONE', #7418, #10757, #12253, .T. ) ; +#3321 = CARTESIAN_POINT ( 'NONE', ( 6.063047595085153700, -30.55562900231690200, 21.46001804219597600 ) ) ; +#3322 = CYLINDRICAL_SURFACE ( 'NONE', #11344, 2.000000000000001800 ) ; +#3323 = ORIENTED_EDGE ( 'NONE', *, *, #11947, .F. ) ; +#3324 = CARTESIAN_POINT ( 'NONE', ( 5.347968359787588900, -30.19909769998425400, 21.97397603315079500 ) ) ; +#3325 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999992200, -5.468681449433579400, 15.53718362736742100 ) ) ; +#3326 = CARTESIAN_POINT ( 'NONE', ( 36.71101947264813200, -30.52039987181205700, 25.34239295518562300 ) ) ; +#3327 = CARTESIAN_POINT ( 'NONE', ( 37.02524706999577800, -94.72219806545246000, 15.44556310733776700 ) ) ; +#3328 = CARTESIAN_POINT ( 'NONE', ( 35.75201716772572500, -19.39458620949283200, 18.73289407328817500 ) ) ; +#3329 = CARTESIAN_POINT ( 'NONE', ( 33.55176483178629400, -31.02063648148752200, 27.01170476678977600 ) ) ; +#3330 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.08917743608634500, 7.821172174202397200 ) ) ; +#3331 = CARTESIAN_POINT ( 'NONE', ( 44.93315868100863500, -5.950798500040146900, -20.10011566883407900 ) ) ; +#3332 = FACE_OUTER_BOUND ( 'NONE', #11289, .T. ) ; +#3333 = VERTEX_POINT ( 'NONE', #12057 ) ; +#3334 = CARTESIAN_POINT ( 'NONE', ( 12.33382712928575700, -30.83162161317353200, 27.45574801241285800 ) ) ; +#3335 = CARTESIAN_POINT ( 'NONE', ( 8.837517808324999900, -30.30659849635984000, 25.75926301874024200 ) ) ; +#3336 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000900, 17.50000000000000400 ) ) ; +#3337 = EDGE_CURVE ( 'NONE', #8001, #1970, #4649, .T. ) ; +#3338 = CARTESIAN_POINT ( 'NONE', ( 0.5269926411693408600, -11.04330776864357800, -12.05964662236193300 ) ) ; +#3339 = CARTESIAN_POINT ( 'NONE', ( 35.27851651412102300, -11.86601890786488400, 24.28177530405734800 ) ) ; +#3340 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, 1.200000000000008400 ) ) ; +#3341 = EDGE_CURVE ( 'NONE', #9564, #4835, #12437, .T. ) ; +#3342 = CARTESIAN_POINT ( 'NONE', ( 38.36072482124576100, -30.52335925818104200, 23.72036924537983500 ) ) ; +#3343 = CYLINDRICAL_SURFACE ( 'NONE', #9048, 1.200000000000010200 ) ; +#3344 = CARTESIAN_POINT ( 'NONE', ( 35.49065562291804100, -31.16531491062507100, 25.78179136559698400 ) ) ; +#3345 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -19.99999999999990400, 0.0000000000000000000 ) ) ; +#3346 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3347 = CARTESIAN_POINT ( 'NONE', ( 45.00010715320051000, -9.999999999999992900, 9.400990337639882500 ) ) ; +#3348 = CARTESIAN_POINT ( 'NONE', ( 32.44521948615071900, -31.54315705787917400, 19.23894334178897500 ) ) ; +#3349 = CARTESIAN_POINT ( 'NONE', ( 6.976402414257327300, -29.75996759898083300, 24.26555761223090700 ) ) ; +#3350 = CARTESIAN_POINT ( 'NONE', ( 40.00492173516596500, -19.98907760965119700, -11.52386284351825000 ) ) ; +#3351 = CARTESIAN_POINT ( 'NONE', ( 31.33674080380992400, -30.82086553778967200, 27.90891096054421200 ) ) ; +#3352 = CARTESIAN_POINT ( 'NONE', ( 12.52669833131538400, -32.54898502397964000, 27.24571251961323900 ) ) ; +#3353 = AXIS2_PLACEMENT_3D ( 'NONE', #24, #11158, #6075 ) ; +#3354 = CARTESIAN_POINT ( 'NONE', ( 39.20185297741584700, -30.46644739706082900, 21.60686338955947900 ) ) ; +#3355 = LINE ( 'NONE', #3542, #385 ) ; +#3356 = CARTESIAN_POINT ( 'NONE', ( 15.45093844490859600, -30.77347370972946200, 28.36765821957494200 ) ) ; +#3357 = CARTESIAN_POINT ( 'NONE', ( 40.98081726839580300, -17.92259215383894900, -13.65996869149914000 ) ) ; +#3358 = VERTEX_POINT ( 'NONE', #12483 ) ; +#3359 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.997974869974376500E-015, 5.545494258170014600E-030 ) ) ; +#3360 = CARTESIAN_POINT ( 'NONE', ( 15.81390733989242900, -94.74416957727982000, 18.36583773334277200 ) ) ; +#3361 = CARTESIAN_POINT ( 'NONE', ( 8.281484463966927800, -100.0000000000000100, -30.08826940046394000 ) ) ; +#3362 = FACE_BOUND ( 'NONE', #7446, .T. ) ; +#3363 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3364 = CARTESIAN_POINT ( 'NONE', ( 0.9084284741246703200, -7.873854980448083300, 18.11134077736451100 ) ) ; +#3365 = CARTESIAN_POINT ( 'NONE', ( 5.905100010803505700, -29.03882003197430400, 22.19048569984330400 ) ) ; +#3366 = CARTESIAN_POINT ( 'NONE', ( 44.18185530278686500, -9.148059839095200400, 15.20303726221983900 ) ) ; +#3367 = CARTESIAN_POINT ( 'NONE', ( 20.14039441766890400, -33.35446909076587500, 26.50697697917620500 ) ) ; +#3368 = CARTESIAN_POINT ( 'NONE', ( 36.24909377944904100, -29.56202603335891900, 25.44942841628491300 ) ) ; +#3369 = CARTESIAN_POINT ( 'NONE', ( 10.44355780063059800, -17.90628279402095300, -24.55847571821886500 ) ) ; +#3370 = CARTESIAN_POINT ( 'NONE', ( 37.78728190862634800, -19.54609687697659500, 16.04851137253987400 ) ) ; +#3371 = CARTESIAN_POINT ( 'NONE', ( 33.46449582193982800, -30.48553882466298100, 27.17705697335544500 ) ) ; +#3372 = CARTESIAN_POINT ( 'NONE', ( 26.24739064583746300, -19.91182656718460800, 23.21058132217369200 ) ) ; +#3373 = CARTESIAN_POINT ( 'NONE', ( 24.85960558233109600, -33.35446909076586800, 26.50697697917620500 ) ) ; +#3374 = CARTESIAN_POINT ( 'NONE', ( 12.33515738636417900, -30.60297593078897200, 27.49187929838086900 ) ) ; +#3375 = CARTESIAN_POINT ( 'NONE', ( 9.081167610733933400, -31.16968662219008500, 25.44537160410457200 ) ) ; +#3376 = PLANE ( 'NONE', #10891 ) ; +#3377 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -99.99999999999998600, -34.56037615019668900 ) ) ; +#3378 = CARTESIAN_POINT ( 'NONE', ( 21.66515785762155800, -19.84089650273205800, 23.26478443220883100 ) ) ; +#3379 = CARTESIAN_POINT ( 'NONE', ( 37.84068856423260000, -29.18436707291646600, 23.87646094704942000 ) ) ; +#3380 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 1, ( + ( #590, #7403 ), + ( #1602, #8737 ), + ( #2597, #9739 ), + ( #3620, #10746 ), + ( #4627, #11765 ), + ( #5674, #12726 ), + ( #6713, #637 ), + ( #7750, #1639 ), + ( #8781, #2640 ), + ( #9776, #3662 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 0.1249999999999999700, 0.1874999999999999200, 0.2499999999999998300, 0.3322941183881588100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#3381 = LINE ( 'NONE', #5984, #11194 ) ; +#3382 = CARTESIAN_POINT ( 'NONE', ( 35.51600403410203900, -30.36853470539385900, 26.16519788457335900 ) ) ; +#3383 = CARTESIAN_POINT ( 'NONE', ( 31.30256230755020000, -95.07596123493897300, 15.99906820980600100 ) ) ; +#3384 = AXIS2_PLACEMENT_3D ( 'NONE', #12136, #2510, #9448 ) ; +#3385 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -99.99999999999998600, -40.86942826376123600 ) ) ; +#3386 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3387 = CARTESIAN_POINT ( 'NONE', ( 35.64079275355739200, -36.91504296463674000, 15.77007779198436000 ) ) ; +#3388 = CARTESIAN_POINT ( 'NONE', ( 7.331425138591698400, -31.01168732646012700, 23.76895970262382500 ) ) ; +#3389 = CARTESIAN_POINT ( 'NONE', ( 41.03243130164285900, -17.90469924244979800, -10.80899686395697200 ) ) ; +#3390 = CARTESIAN_POINT ( 'NONE', ( 31.33716902032424700, -30.83578311995924900, 27.90615586139292500 ) ) ; +#3391 = CARTESIAN_POINT ( 'NONE', ( 8.001536228781075600, -31.43984379204834000, 22.94330155308518800 ) ) ; +#3392 = EDGE_CURVE ( 'NONE', #6473, #4835, #4976, .T. ) ; +#3393 = AXIS2_PLACEMENT_3D ( 'NONE', #8688, #2551, #9693 ) ; +#3394 = CARTESIAN_POINT ( 'NONE', ( 39.17145930162873000, -29.01307444346728900, 21.97933023702544000 ) ) ; +#3395 = LINE ( 'NONE', #5809, #721 ) ; +#3396 = AXIS2_PLACEMENT_3D ( 'NONE', #112, #7219, #1123 ) ; +#3397 = CARTESIAN_POINT ( 'NONE', ( 20.07428009966823300, -33.35320614276255900, 26.50719967098504900 ) ) ; +#3398 = CARTESIAN_POINT ( 'NONE', ( 10.36022868457732600, -93.14497689656811000, 21.08830651652203200 ) ) ; +#3399 = CARTESIAN_POINT ( 'NONE', ( 25.28710378704685600, -23.34835380355929900, -27.35367492360987600 ) ) ; +#3400 = CARTESIAN_POINT ( 'NONE', ( 13.63824436693447100, -15.69367221611400100, 23.99605196898897900 ) ) ; +#3401 = VERTEX_POINT ( 'NONE', #11733 ) ; +#3402 = CARTESIAN_POINT ( 'NONE', ( 5.952438064904345800, -30.56418046958781400, 22.02985737968768400 ) ) ; +#3403 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000527900, -8.104579381656931100, 14.51401470945501900 ) ) ; +#3404 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3405 = CARTESIAN_POINT ( 'NONE', ( 36.44056862022878800, -30.33654384000480400, 25.57254098751284800 ) ) ; +#3406 = CIRCLE ( 'NONE', #9870, 3.000000000000002700 ) ; +#3407 = CARTESIAN_POINT ( 'NONE', ( 39.18215612009587500, -19.71696536075020100, 13.02153393283576600 ) ) ; +#3408 = ADVANCED_FACE ( 'NONE', ( #12121 ), #7049, .F. ) ; +#3409 = EDGE_CURVE ( 'NONE', #1818, #9827, #9924, .T. ) ; +#3410 = CARTESIAN_POINT ( 'NONE', ( 33.46449697987623000, -30.88678174098095800, 27.10630935224402200 ) ) ; +#3411 = CARTESIAN_POINT ( 'NONE', ( 44.47213083400070100, -11.05573833199855800, -11.53187062880260200 ) ) ; +#3412 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 7.000000000000000900, 17.50000000000000400 ) ) ; +#3413 = CARTESIAN_POINT ( 'NONE', ( 12.74051568569976200, -30.89786550917577700, 27.59022482621525200 ) ) ; +#3414 = CARTESIAN_POINT ( 'NONE', ( 10.24210497907795600, -19.81263265499841700, -23.97526413255842200 ) ) ; +#3415 = ORIENTED_EDGE ( 'NONE', *, *, #2062, .T. ) ; +#3416 = CARTESIAN_POINT ( 'NONE', ( 8.923521514170170500, -30.51525450823558200, 25.79089129570610000 ) ) ; +#3417 = CARTESIAN_POINT ( 'NONE', ( 34.57265536721326500, -12.24253140253079600, 24.45433017301526100 ) ) ; +#3418 = CARTESIAN_POINT ( 'NONE', ( 30.65833095307472100, -28.91241948389484400, 28.45823485382535600 ) ) ; +#3419 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, -17.49999999999999600 ) ) ; +#3420 = EDGE_LOOP ( 'NONE', ( #2152, #10277 ) ) ; +#3421 = CARTESIAN_POINT ( 'NONE', ( 38.30507386074859300, -30.23756226482829800, 24.06118839683655300 ) ) ; +#3422 = AXIS2_PLACEMENT_3D ( 'NONE', #3010, #10136, #4006 ) ; +#3423 = CARTESIAN_POINT ( 'NONE', ( 35.43537822404103100, -31.05830822072438100, 25.91618070111389800 ) ) ; +#3424 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3425 = ORIENTED_EDGE ( 'NONE', *, *, #8878, .F. ) ; +#3426 = ORIENTED_EDGE ( 'NONE', *, *, #12609, .F. ) ; +#3427 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3428 = CARTESIAN_POINT ( 'NONE', ( 44.29509065950168200, -9.999999999999996400, 13.52878568315422000 ) ) ; +#3429 = CARTESIAN_POINT ( 'NONE', ( 39.75151882078325400, -29.45032187791324300, 17.69785893835715000 ) ) ; +#3430 = CARTESIAN_POINT ( 'NONE', ( 6.897495718040089800, -30.09567121794352600, 24.31410550637845000 ) ) ; +#3431 = VERTEX_POINT ( 'NONE', #9746 ) ; +#3432 = CARTESIAN_POINT ( 'NONE', ( 39.59320518311245300, -23.05448429915008600, -8.547299576110802400 ) ) ; +#3433 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983000, 27.93782961424065500 ) ) ; +#3434 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1584, #8157, #9171, #3052, #10183, #4054, #11201, #5088, #12188, #6117, #68, #7177, #1077, #8199 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002408642014672558200, 0.003612963022008841600, 0.004215123525676985800, 0.004516203777511059800, 0.004666743903428094600, 0.004817284029345129400 ), + .UNSPECIFIED. ) ; +#3435 = CARTESIAN_POINT ( 'NONE', ( 25.04594542586620100, -33.17879905958958600, 28.41295234537445700 ) ) ; +#3436 = CARTESIAN_POINT ( 'NONE', ( 39.73810034002044500, -30.15865373349373600, 21.77198076975678000 ) ) ; +#3437 = ORIENTED_EDGE ( 'NONE', *, *, #7448, .T. ) ; +#3438 = CARTESIAN_POINT ( 'NONE', ( 8.343828509952652800, -18.01237507300752600, -23.06837513076480000 ) ) ; +#3439 = ORIENTED_EDGE ( 'NONE', *, *, #12753, .T. ) ; +#3440 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -5.703111534282319500, 32.34395275962862800 ) ) ; +#3441 = CARTESIAN_POINT ( 'NONE', ( 8.374291367761662400, -97.45025329603068100, 19.48230279083017200 ) ) ; +#3442 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000003600, -27.12263156217949200, 6.907741323545568700 ) ) ; +#3443 = AXIS2_PLACEMENT_3D ( 'NONE', #3003, #9122, #4000 ) ; +#3444 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -12.49999999999998400, -10.20941827348498200 ) ) ; +#3445 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3446 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669239200, -0.9848077530122092400 ) ) ; +#3447 = CARTESIAN_POINT ( 'NONE', ( 15.87279401454542300, -17.63438220658419900, 23.65385243593862800 ) ) ; +#3448 = CARTESIAN_POINT ( 'NONE', ( 5.407439498921649900, -29.39405691885805900, 22.22497698724953400 ) ) ; +#3449 = ORIENTED_EDGE ( 'NONE', *, *, #696, .F. ) ; +#3450 = ORIENTED_EDGE ( 'NONE', *, *, #3641, .T. ) ; +#3451 = CARTESIAN_POINT ( 'NONE', ( 39.86828539811537600, -19.88432743301863700, 10.05514024541818300 ) ) ; +#3452 = VERTEX_POINT ( 'NONE', #7612 ) ; +#3453 = CARTESIAN_POINT ( 'NONE', ( 33.25820189812138500, -30.39943969395253000, 27.26135219963452600 ) ) ; +#3454 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, -1.200000000000005700 ) ) ; +#3455 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999998900, -94.74682992296695300, 18.71443453778783800 ) ) ; +#3456 = CARTESIAN_POINT ( 'NONE', ( 44.15492000030497600, -8.389711229384598600, -19.69998625431987800 ) ) ; +#3457 = CARTESIAN_POINT ( 'NONE', ( 12.73993338247998400, -30.73930983564755000, 27.62342479963629000 ) ) ; +#3458 = CARTESIAN_POINT ( 'NONE', ( 9.073688144004048400, -29.67385076315403900, 25.72005420299638300 ) ) ; +#3459 = CARTESIAN_POINT ( 'NONE', ( 33.59424268543300200, -17.07142213206428800, -25.06701809440275100 ) ) ; +#3460 = CARTESIAN_POINT ( 'NONE', ( 34.88537447724171200, -28.34762686872466000, 24.83247041180277400 ) ) ; +#3461 = CARTESIAN_POINT ( 'NONE', ( 35.38076659138082600, -10.19050254156035600, 24.96640926202937600 ) ) ; +#3462 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3030, #4970, #10157 ), + ( #4027, #11178, #5067 ), + ( #12163, #6094, #42 ), + ( #7150, #1052, #8175 ), + ( #2061, #9192, #3072 ), + ( #10204, #4077, #11220 ), + ( #5108, #12206, #6139 ), + ( #87, #7199, #1097 ), + ( #8225, #2105, #9239 ), + ( #3112, #10246, #4125 ), + ( #11269, #5148, #12252 ), + ( #6189, #135, #7240 ), + ( #1144, #8272, #2146 ), + ( #9279, #3161, #10289 ), + ( #4169, #11313, #5194 ), + ( #12293, #6232, #182 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -8.572339192273961600E-005, 0.001710880891694071600, 0.003507485175310882900, 0.005304089458927694100, 0.007100693742544505000, 0.01069390230977812800, 0.01249050659339493900, 0.01428711087701175000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7865557600367204500, 1.000000000000000000), + ( 1.000000000000000000, 0.7877005115777731000, 1.000000000000000000), + ( 1.000000000000000000, 0.7885680324413700800, 1.000000000000000000), + ( 1.000000000000000000, 0.7899639056182185000, 1.000000000000000000), + ( 1.000000000000000000, 0.7904777353247849400, 1.000000000000000000), + ( 1.000000000000000000, 0.7913588659598844700, 1.000000000000000000), + ( 1.000000000000000000, 0.7916890699106700100, 1.000000000000000000), + ( 1.000000000000000000, 0.7922828863797615200, 1.000000000000000000), + ( 1.000000000000000000, 0.7925358944427822700, 1.000000000000000000), + ( 1.000000000000000000, 0.7931848320817490600, 1.000000000000000000), + ( 1.000000000000000000, 0.7935002611616899200, 1.000000000000000000), + ( 1.000000000000000000, 0.7938385292873873000, 1.000000000000000000), + ( 1.000000000000000000, 0.7939174126816900300, 1.000000000000000000), + ( 1.000000000000000000, 0.7940484445074694800, 1.000000000000000000), + ( 1.000000000000000000, 0.7940998031415209500, 1.000000000000000000), + ( 1.000000000000000000, 0.7941268098083124100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3463 = ORIENTED_EDGE ( 'NONE', *, *, #12478, .F. ) ; +#3464 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#3465 = CARTESIAN_POINT ( 'NONE', ( 37.82071624356622400, -30.99861769737059100, 23.54054738509561400 ) ) ; +#3466 = CARTESIAN_POINT ( 'NONE', ( 35.19226988032371400, -30.11559303774800300, 26.31168897526253800 ) ) ; +#3467 = CARTESIAN_POINT ( 'NONE', ( 44.63057166894282100, -7.378889965511513400, 16.27043522976736500 ) ) ; +#3468 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -97.57596123493894400, 0.0000000000000000000 ) ) ; +#3469 = DESIGN_CONTEXT ( 'detailed design', #2124, 'design' ) ; +#3470 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000700, -95.07596123493894400, 16.93034213569666900 ) ) ; +#3471 = ORIENTED_EDGE ( 'NONE', *, *, #7694, .T. ) ; +#3472 = CARTESIAN_POINT ( 'NONE', ( 38.80769786673291600, -30.11710550026473100, 12.31106729370322100 ) ) ; +#3473 = CARTESIAN_POINT ( 'NONE', ( 7.350199563367869600, -29.20230134728121000, 24.07138164954491800 ) ) ; +#3474 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 3.469446951953616200E-016, -1.000000000000000000 ) ) ; +#3475 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983000, 27.93782961424065500 ) ) ; +#3476 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1153, #11098, #1355, #1108 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.5088892147903028000 ), + .UNSPECIFIED. ) ; +#3477 = CARTESIAN_POINT ( 'NONE', ( 24.99183557490544800, -33.35180202424789500, 26.50734624027219200 ) ) ; +#3478 = VECTOR ( 'NONE', #11246, 1000.000000000000100 ) ; +#3479 = CARTESIAN_POINT ( 'NONE', ( 38.88192481588180300, -28.90571795161580900, 22.05771437972654100 ) ) ; +#3480 = ORIENTED_EDGE ( 'NONE', *, *, #9149, .F. ) ; +#3481 = CARTESIAN_POINT ( 'NONE', ( 25.10306456692114100, -19.87568216611860800, 23.25829123793067100 ) ) ; +#3482 = DIRECTION ( 'NONE', ( -0.9998119278664177000, -0.01909889591383903300, -0.003367650651352349000 ) ) ; +#3483 = EDGE_CURVE ( 'NONE', #7111, #3705, #7585, .T. ) ; +#3484 = CARTESIAN_POINT ( 'NONE', ( 36.25464876742389500, -12.50000000000000200, -15.81074212861718900 ) ) ; +#3485 = CARTESIAN_POINT ( 'NONE', ( 34.47698837955803700, -16.62568067036006500, -24.81012167869094400 ) ) ; +#3486 = CARTESIAN_POINT ( 'NONE', ( 18.27138591855936800, -18.86050811041318600, 23.43765335734804400 ) ) ; +#3487 = CARTESIAN_POINT ( 'NONE', ( 6.350319450919900400, -30.75268561351800800, 22.30765021051160300 ) ) ; +#3488 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999460000, -7.224208373351857800, 15.92579964943458400 ) ) ; +#3489 = CARTESIAN_POINT ( 'NONE', ( 10.83687051995215900, -30.65381713439058900, 26.84223953427321900 ) ) ; +#3490 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3491 = CARTESIAN_POINT ( 'NONE', ( 34.82718585734764400, -12.47470396266402800, -25.00000000000000000 ) ) ; +#3492 = CARTESIAN_POINT ( 'NONE', ( 33.27123976136831400, -30.75507894866649700, 27.22908635998156900 ) ) ; +#3493 = CARTESIAN_POINT ( 'NONE', ( 39.72419363255805500, -30.10038250862141500, 9.162746654964744100 ) ) ; +#3494 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807600E-016 ) ) ; +#3495 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -95.07596123493894400, 17.53844207640286600 ) ) ; +#3496 = CARTESIAN_POINT ( 'NONE', ( 21.71346480588963600, -33.38451864986032500, 26.50167843114945800 ) ) ; +#3497 = CARTESIAN_POINT ( 'NONE', ( 12.94427402901395800, -30.90276217482618300, 27.66102668829708500 ) ) ; +#3498 = AXIS2_PLACEMENT_3D ( 'NONE', #6352, #11476, #5364 ) ; +#3499 = FACE_OUTER_BOUND ( 'NONE', #9062, .T. ) ; +#3500 = CARTESIAN_POINT ( 'NONE', ( 9.132651146830944800, -30.76386162992945800, 25.82934089006377900 ) ) ; +#3501 = CARTESIAN_POINT ( 'NONE', ( 34.80797970675411800, -20.11226088235577300, -23.86190544577290500 ) ) ; +#3502 = CARTESIAN_POINT ( 'NONE', ( 39.00926761273267100, -31.36225577062474900, 23.81452863448248900 ) ) ; +#3503 = CARTESIAN_POINT ( 'NONE', ( 3.405745210161181400, -10.00293073726416500, -22.86614729118478500 ) ) ; +#3504 = EDGE_LOOP ( 'NONE', ( #8245, #8273 ) ) ; +#3505 = CARTESIAN_POINT ( 'NONE', ( 38.20562388302773400, -29.98381398562307300, 24.19167580497357400 ) ) ; +#3506 = CARTESIAN_POINT ( 'NONE', ( 35.21785434523737000, -30.79229561630089100, 26.23504698288871900 ) ) ; +#3507 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#3508 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -94.96381121975215900, 18.14636354334061300 ) ) ; +#3509 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3510 = CARTESIAN_POINT ( 'NONE', ( 39.91951946515970200, -28.97208599017945800, 8.247879060001926300 ) ) ; +#3511 = CARTESIAN_POINT ( 'NONE', ( 7.071958298981371600, -30.38254896567991300, 24.41713814977361000 ) ) ; +#3512 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122092400, 0.1736481776669239200 ) ) ; +#3513 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000004400, -99.99999999999998600, -40.86942826376123600 ) ) ; +#3514 = AXIS2_PLACEMENT_3D ( 'NONE', #11248, #5127, #12232 ) ; +#3515 = FACE_OUTER_BOUND ( 'NONE', #1623, .T. ) ; +#3516 = CARTESIAN_POINT ( 'NONE', ( 39.94345861951260400, -29.82089491764634600, 21.88505763560063500 ) ) ; +#3517 = CARTESIAN_POINT ( 'NONE', ( 44.35039290416551000, -9.999999999999998200, -16.66595216622816300 ) ) ; +#3518 = CARTESIAN_POINT ( 'NONE', ( 5.406794814213441200, -23.05448429273989300, -8.547299586400960400 ) ) ; +#3519 = CARTESIAN_POINT ( 'NONE', ( 12.90756160371101100, -95.07596123493894400, 15.72880384773919000 ) ) ; +#3520 = CARTESIAN_POINT ( 'NONE', ( 1.871779396874596400, -8.903771598390262600, -23.07152976585512900 ) ) ; +#3521 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999990800, -5.969893259027570800, 14.90238526646762900 ) ) ; +#3522 = CARTESIAN_POINT ( 'NONE', ( 28.28979302947227800, -12.50000000000000200, -22.52118705024016500 ) ) ; +#3523 = CARTESIAN_POINT ( 'NONE', ( 42.49999999999999300, 9.500000000000000000, 0.0000000000000000000 ) ) ; +#3524 = CARTESIAN_POINT ( 'NONE', ( 34.96059634062899600, -20.33631010158313000, -23.67440230603785500 ) ) ; +#3525 = CARTESIAN_POINT ( 'NONE', ( 18.28754054949377700, -19.13734127626284100, 23.29130835283736200 ) ) ; +#3526 = CARTESIAN_POINT ( 'NONE', ( 5.401983620604955400, -29.80197554517830100, 22.47579678693627500 ) ) ; +#3527 = LINE ( 'NONE', #577, #6574 ) ; +#3528 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999995700, -5.958797391346912800, 14.93492569877043200 ) ) ; +#3529 = CARTESIAN_POINT ( 'NONE', ( 10.87416410069373600, -30.14760289598933000, 26.85315132381902700 ) ) ; +#3530 = ADVANCED_FACE ( 'NONE', ( #4012 ), #2691, .T. ) ; +#3532 = CARTESIAN_POINT ( 'NONE', ( 37.59277647551878200, -28.61588495956406000, 23.00302379891103400 ) ) ; +#3531 = AXIS2_PLACEMENT_3D ( 'NONE', #4366, #6572, #513 ) ; +#3533 = CARTESIAN_POINT ( 'NONE', ( 33.15783862825313800, -30.39965817021739600, 27.30211301489430700 ) ) ; +#3534 = CARTESIAN_POINT ( 'NONE', ( 35.68175115121692900, -36.88767626987984700, 15.73392382070919600 ) ) ; +#3535 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3536 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, -16.29999999999999000 ) ) ; +#3537 = CARTESIAN_POINT ( 'NONE', ( 43.87457083097064700, -9.999999999999992900, 14.86526534314501400 ) ) ; +#3538 = CARTESIAN_POINT ( 'NONE', ( 12.94477844901865800, -30.78732647008180100, 27.68635702060432600 ) ) ; +#3539 = CARTESIAN_POINT ( 'NONE', ( 9.170737162461646700, -29.97949034418003200, 25.91051784561296100 ) ) ; +#3540 = CIRCLE ( 'NONE', #7222, 2.499999999999998700 ) ; +#3541 = CARTESIAN_POINT ( 'NONE', ( -1.237515135938532800E-015, 9.723972447247824400, -19.19885073465395900 ) ) ; +#3542 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, -14.31000000000000400 ) ) ; +#3543 = CARTESIAN_POINT ( 'NONE', ( 2.624463753644283900, -9.276414809731027900, -23.66316938089589100 ) ) ; +#3544 = CARTESIAN_POINT ( 'NONE', ( 37.80517737137471100, -30.96210616578017400, 23.67775397054553800 ) ) ; +#3545 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.425930945970728600, -14.07492217516390900 ) ) ; +#3546 = ORIENTED_EDGE ( 'NONE', *, *, #4922, .T. ) ; +#3547 = CARTESIAN_POINT ( 'NONE', ( 34.96332960048179900, -29.93520891018589900, 26.38375426594878800 ) ) ; +#3548 = EDGE_LOOP ( 'NONE', ( #7535, #6549, #12049 ) ) ; +#3549 = CARTESIAN_POINT ( 'NONE', ( 34.14231689510461400, -14.00410420334703900, -25.02000248164473100 ) ) ; +#3550 = CIRCLE ( 'NONE', #8519, 1.200000000000005700 ) ; +#3551 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -23.00000000000000000 ) ) ; +#3552 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3553 = CARTESIAN_POINT ( 'NONE', ( 7.439992729752565200, -29.30299718111696400, 24.26548752727642000 ) ) ; +#3554 = CARTESIAN_POINT ( 'NONE', ( 14.49734725253911300, -30.80112311558563600, 28.16391810988216100 ) ) ; +#3555 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 8.200000000000013500, -17.49999999999999600 ) ) ; +#3556 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000013300, -94.56096275415031000, 14.57260865436183800 ) ) ; +#3557 = EDGE_CURVE ( 'NONE', #614, #2313, #6757, .T. ) ; +#3558 = CARTESIAN_POINT ( 'NONE', ( 38.88011203659795700, -30.62110848269370000, 21.75562120544806900 ) ) ; +#3559 = ORIENTED_EDGE ( 'NONE', *, *, #11798, .F. ) ; +#3560 = AXIS2_PLACEMENT_3D ( 'NONE', #914, #8036, #1919 ) ; +#3561 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, 15.51856112887630200 ) ) ; +#3562 = CARTESIAN_POINT ( 'NONE', ( 5.536084470938146000, -20.80541900357814500, -7.598550432354561400 ) ) ; +#3563 = CARTESIAN_POINT ( 'NONE', ( 5.141574328341788700, -91.44579736576740500, -1.100180828916116800 ) ) ; +#3564 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, -17.49999999999999600 ) ) ; +#3565 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000004300, -6.201999034644581200, 14.59884346690668600 ) ) ; +#3566 = PLANE ( 'NONE', #2450 ) ; +#3567 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, -17.49999999999999600 ) ) ; +#3568 = CARTESIAN_POINT ( 'NONE', ( 14.37429638813039500, -19.19513653488556000, 22.26698579027548100 ) ) ; +#3569 = CARTESIAN_POINT ( 'NONE', ( 6.352054730595285500, -28.96981745031749600, 22.62268186597558600 ) ) ; +#3570 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999995700, -6.860163575631172100, 13.68640636575841200 ) ) ; +#3571 = ORIENTED_EDGE ( 'NONE', *, *, #6716, .F. ) ; +#3572 = CARTESIAN_POINT ( 'NONE', ( 15.92391054053097800, -100.0000000000000100, -37.70236617686631300 ) ) ; +#3573 = CARTESIAN_POINT ( 'NONE', ( 10.93924487263667400, -30.79053289506802200, 26.85725049734811200 ) ) ; +#3574 = ORIENTED_EDGE ( 'NONE', *, *, #1220, .T. ) ; +#3575 = EDGE_CURVE ( 'NONE', #8893, #5024, #1663, .T. ) ; +#3576 = CARTESIAN_POINT ( 'NONE', ( 40.18516337093077300, -11.96452431255060300, 19.57179600738997700 ) ) ; +#3577 = EDGE_CURVE ( 'NONE', #7944, #10533, #5169, .T. ) ; +#3578 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, -14.31000000000000400 ) ) ; +#3579 = CARTESIAN_POINT ( 'NONE', ( 33.17144375615274000, -30.68583792458567700, 27.28397234118655800 ) ) ; +#3580 = VERTEX_POINT ( 'NONE', #4932 ) ; +#3581 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3582 = CARTESIAN_POINT ( 'NONE', ( 4.999999918618738300, -29.71061042947956900, 21.60901691940279400 ) ) ; +#3583 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3584 = CARTESIAN_POINT ( 'NONE', ( 12.94427475606047500, -30.66044346633736200, 27.70376823006907300 ) ) ; +#3585 = ORIENTED_EDGE ( 'NONE', *, *, #7950, .T. ) ; +#3586 = CARTESIAN_POINT ( 'NONE', ( 9.298414996177665900, -31.05968364037934400, 25.72516311374482400 ) ) ; +#3587 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3588 = CARTESIAN_POINT ( 'NONE', ( 4.759064959663115600, -11.33691202554046700, -23.46804970749520400 ) ) ; +#3589 = VERTEX_POINT ( 'NONE', #4634 ) ; +#3590 = CARTESIAN_POINT ( 'NONE', ( 11.22980991868658400, -12.02881371354791700, -25.09232974958907600 ) ) ; +#3591 = CARTESIAN_POINT ( 'NONE', ( 37.94407173747501400, -29.60440412011128000, 24.22357351277567300 ) ) ; +#3592 = VERTEX_POINT ( 'NONE', #4616 ) ; +#3593 = CARTESIAN_POINT ( 'NONE', ( -9.775971732713906100E-013, -8.488764162825203700, -17.19715848363410900 ) ) ; +#3594 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #6915, #11953, #9982 ), + ( #3852, #10996, #4883 ), + ( #11993, #5914, #12945 ), + ( #6964, #872, #8005 ), + ( #1884, #9017, #2894 ), + ( #10027, #3898, #11037 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001925517017500401200, 0.003851034035000802300 ), + ( 0.3066693819535608600, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 0.9567274834263421700, 0.9294476085320271300, 1.000000000000000000), + ( 0.9596419564082996300, 0.9341994245812712500, 1.000000000000000000), + ( 0.9623486575699666800, 0.9386124852272748100, 1.000000000000000000), + ( 0.9671297029618841600, 0.9464075989120208600, 1.000000000000000000), + ( 0.9691965120872161300, 0.9497773665623904200, 1.000000000000000000), + ( 0.9708131788802920600, 0.9524132129954079300, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3595 = CARTESIAN_POINT ( 'NONE', ( 35.04304192938086300, -30.60874663109475700, 26.40272586244648400 ) ) ; +#3596 = CARTESIAN_POINT ( 'NONE', ( 44.23671031654875900, -9.545299439833780000, 14.37733975435046800 ) ) ; +#3597 = ORIENTED_EDGE ( 'NONE', *, *, #6579, .T. ) ; +#3598 = CARTESIAN_POINT ( 'NONE', ( 12.72694026239744000, -10.39608917361186300, -25.06984120807428300 ) ) ; +#3599 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3600 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#3601 = CARTESIAN_POINT ( 'NONE', ( 5.095023178169921800, -22.57442852947490400, -13.95606698953529600 ) ) ; +#3602 = ORIENTED_EDGE ( 'NONE', *, *, #11816, .T. ) ; +#3603 = CARTESIAN_POINT ( 'NONE', ( 7.366022406927778700, -30.74498584892902600, 24.35099758049291200 ) ) ; +#3604 = CARTESIAN_POINT ( 'NONE', ( 9.713673521952491900, -28.37802120022066500, 24.59887593760103600 ) ) ; +#3605 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3606 = CARTESIAN_POINT ( 'NONE', ( 39.77098319041719100, -29.51032277299358200, 22.09444038081797900 ) ) ; +#3607 = CARTESIAN_POINT ( 'NONE', ( 20.18719255689187600, -31.29913968154957600, 28.74438700826459600 ) ) ; +#3608 = CARTESIAN_POINT ( 'NONE', ( 4.553727676606842000, -18.85526279705034000, -6.499914302271373700 ) ) ; +#3609 = ORIENTED_EDGE ( 'NONE', *, *, #12266, .F. ) ; +#3610 = ORIENTED_EDGE ( 'NONE', *, *, #6327, .T. ) ; +#3611 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -20.21670577515589400, -8.218006522437299600 ) ) ; +#3612 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -7.803321078347547500, 12.03060985176017900 ) ) ; +#3613 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000003600, -6.868021920302680000, 13.67386907748931600 ) ) ; +#3614 = ORIENTED_EDGE ( 'NONE', *, *, #11816, .F. ) ; +#3615 = CARTESIAN_POINT ( 'NONE', ( 16.84266098583295000, -28.84503334411322600, 29.00759413925710500 ) ) ; +#3616 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122093500, -0.1736481776669231400 ) ) ; +#3617 = CARTESIAN_POINT ( 'NONE', ( 33.64771066131344700, -13.41914980538562000, -25.15601430610515600 ) ) ; +#3618 = CARTESIAN_POINT ( 'NONE', ( 5.662641708049346100, -30.17209756548836100, 22.63798417457218900 ) ) ; +#3619 = CARTESIAN_POINT ( 'NONE', ( 3.844629486347477700, -11.23571604708997100, -22.46755997374653900 ) ) ; +#3620 = CARTESIAN_POINT ( 'NONE', ( 13.73942079380888800, -97.40634803306923600, 21.37496054325771100 ) ) ; +#3621 = CARTESIAN_POINT ( 'NONE', ( 10.95657684188720400, -30.27841029587706600, 26.91035514046491900 ) ) ; +#3622 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000900, 17.50000000000000400 ) ) ; +#3623 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1632, #1674, #1461, #5043, #5664, #5215, #1336, #1292, #1253, #1204, #1165, #1122, #1074, #991 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( -3.014604540351079800E-005, 0.003778343861709765600, 0.007586833768823042000, 0.009491078722379671700, 0.01139532367593631100, 0.01329956862949294900, 0.01520381358304958800 ), + .UNSPECIFIED. ) ; +#3624 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 9.500000000000000000, -15.51856112887629800 ) ) ; +#3625 = CARTESIAN_POINT ( 'NONE', ( 33.15851793630814400, -31.00209064259151100, 27.19749873386232500 ) ) ; +#3626 = CARTESIAN_POINT ( 'NONE', ( 11.69166596692118700, -12.50000000000001400, 18.87600949881220600 ) ) ; +#3627 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2278, #3302, #1367, #8504, #2366, #9508, #3383, #10522, #4391, #11539, #5432, #12508, #6465, #413, #7519, #1413 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 1, 2, 2, 1, 2, 4 ), + ( 0.0000000000000000000, 0.2012099716565028400, 0.3018149574847545100, 0.4024199433130061800, 0.4527224362271326000, 0.5030249291412589600, 0.6036299149695121300, 0.7042349007977650700, 0.8048398866260181300 ), + .UNSPECIFIED. ) ; +#3628 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3629 = VECTOR ( 'NONE', #3167, 1000.000000000000000 ) ; +#3630 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -97.51638471114853200, 22.06850012136330700 ) ) ; +#3631 = EDGE_LOOP ( 'NONE', ( #4302, #5575, #6873, #8165, #12679 ) ) ; +#3632 = CARTESIAN_POINT ( 'NONE', ( 13.25243318772795200, -30.82399997132790000, 27.78072682455518100 ) ) ; +#3633 = CARTESIAN_POINT ( 'NONE', ( 9.204347449635985600, -30.32882253591844800, 25.99689582968747800 ) ) ; +#3634 = CARTESIAN_POINT ( 'NONE', ( 10.19433260432352000, -20.12018703696184500, -23.86810836741796000 ) ) ; +#3635 = CARTESIAN_POINT ( 'NONE', ( 41.72327898825455600, -9.693645654354444500, 22.50000000000000000 ) ) ; +#3636 = CARTESIAN_POINT ( 'NONE', ( 4.904504269498841200, -9.843776498956319900, -24.19056825057180000 ) ) ; +#3637 = AXIS2_PLACEMENT_3D ( 'NONE', #355, #7452, #1343 ) ; +#3638 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3639 = CARTESIAN_POINT ( 'NONE', ( 37.94408037086746800, -30.70462661863305300, 24.02958290036342200 ) ) ; +#3640 = CARTESIAN_POINT ( 'NONE', ( 0.9903254605854588900, -7.124657567994333400, -21.45377900499128600 ) ) ; +#3641 = EDGE_CURVE ( 'NONE', #4073, #7779, #2813, .T. ) ; +#3642 = CIRCLE ( 'NONE', #460, 5.000000000000000000 ) ; +#3643 = CARTESIAN_POINT ( 'NONE', ( 34.95934358492989000, -31.14846239450135500, 26.16294780347642800 ) ) ; +#3644 = EDGE_LOOP ( 'NONE', ( #9340, #9522, #9977, #10904 ) ) ; +#3645 = CARTESIAN_POINT ( 'NONE', ( 11.22711264382806800, -10.08189443953935600, -24.99999999999999600 ) ) ; +#3646 = CARTESIAN_POINT ( 'NONE', ( 24.81280616483239900, -30.65917406624146600, 28.85723021296911000 ) ) ; +#3647 = CARTESIAN_POINT ( 'NONE', ( 11.95012713822207400, -23.68154709439625400, -25.04292306583338500 ) ) ; +#3648 = CARTESIAN_POINT ( 'NONE', ( 7.366000070817310800, -29.67644818443139300, 24.53940485675091700 ) ) ; +#3649 = CARTESIAN_POINT ( 'NONE', ( 5.598461784880952600, -29.44871316623642300, 23.84023540620608700 ) ) ; +#3650 = CARTESIAN_POINT ( 'NONE', ( 43.24887926476643700, -8.800629358799767500, -22.99999999999994700 ) ) ; +#3651 = CARTESIAN_POINT ( 'NONE', ( 39.55072743853180100, -89.85744524174045000, -0.4790332503564265800 ) ) ; +#3652 = CARTESIAN_POINT ( 'NONE', ( 39.01419733401006300, -30.57886736767343200, 21.92236646085304100 ) ) ; +#3653 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, -17.49999999999999600 ) ) ; +#3654 = CARTESIAN_POINT ( 'NONE', ( 5.277776254973671800, -22.74521436066730800, -9.043787395341599500 ) ) ; +#3655 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -22.36781719137899300, -11.94938068502386700 ) ) ; +#3656 = CARTESIAN_POINT ( 'NONE', ( 34.14175189782736200, -99.99999999999998600, 20.06569364463890200 ) ) ; +#3657 = CARTESIAN_POINT ( 'NONE', ( 10.03220454034423300, -20.32149963875683300, -23.67186603788615800 ) ) ; +#3658 = EDGE_CURVE ( 'NONE', #2313, #105, #9778, .T. ) ; +#3659 = CARTESIAN_POINT ( 'NONE', ( 7.434635331729903200, -95.07596123493894400, 12.88291539575248400 ) ) ; +#3660 = CARTESIAN_POINT ( 'NONE', ( 6.288455272932896600, -29.08230345001347300, 22.79679331819767900 ) ) ; +#3661 = CARTESIAN_POINT ( 'NONE', ( 44.23740469243650600, -9.555615474968769600, 14.40532332663926200 ) ) ; +#3662 = CARTESIAN_POINT ( 'NONE', ( 6.256867239339362300, -99.99999999999998600, 17.91974006491779600 ) ) ; +#3663 = CARTESIAN_POINT ( 'NONE', ( 11.15007767752500300, -30.98088823896941000, 26.88649947086724300 ) ) ; +#3664 = CARTESIAN_POINT ( 'NONE', ( 3.636604637697773400, -11.20561085064868000, -22.17479705136924700 ) ) ; +#3665 = CARTESIAN_POINT ( 'NONE', ( 38.54670034570125400, -7.742549880958820900, -24.99999999999999600 ) ) ; +#3666 = ORIENTED_EDGE ( 'NONE', *, *, #10146, .F. ) ; +#3667 = CARTESIAN_POINT ( 'NONE', ( 32.86819461532810700, -30.63015132515386400, 27.41253313096213500 ) ) ; +#3668 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9993, #7969, #12004, #5923, #12955, #6978, #886, #8011, #1894, #9030 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.2500000000000000000, 0.5000000000000000000, 0.7500000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#3669 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#3670 = FACE_OUTER_BOUND ( 'NONE', #9752, .T. ) ; +#3671 = CARTESIAN_POINT ( 'NONE', ( 42.77294745371471400, -9.999999999999996400, 17.42263787871703700 ) ) ; +#3672 = CARTESIAN_POINT ( 'NONE', ( 13.25175249690120800, -30.74119921061841200, 27.79428103593159700 ) ) ; +#3673 = CARTESIAN_POINT ( 'NONE', ( 9.509034010441512300, -31.16542693037176900, 25.78173817593858900 ) ) ; +#3674 = CARTESIAN_POINT ( 'NONE', ( 11.40575731456750900, -17.07142213206140700, -25.06701809440317400 ) ) ; +#3675 = CARTESIAN_POINT ( 'NONE', ( 5.101369845103653800, -8.656867879200214900, -24.89349312596191800 ) ) ; +#3676 = CARTESIAN_POINT ( 'NONE', ( 37.69977931714393500, -29.26828454496002900, 24.10439839870933200 ) ) ; +#3677 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999979700, -23.91420473869548500, -27.45344971053350500 ) ) ; +#3678 = CIRCLE ( 'NONE', #4778, 1.200000000000006600 ) ; +#3679 = CARTESIAN_POINT ( 'NONE', ( 34.65212946573093000, -30.50007555200749500, 26.62310714799685800 ) ) ; +#3680 = CARTESIAN_POINT ( 'NONE', ( 31.64705527229340400, -30.74609940648375400, 27.82705221198742200 ) ) ; +#3681 = CARTESIAN_POINT ( 'NONE', ( 10.87862075586475200, -11.32927338043932000, -25.00000000000388700 ) ) ; +#3682 = CARTESIAN_POINT ( 'NONE', ( 9.610460087670050600, -17.20637079067576600, -24.99999999999996400 ) ) ; +#3683 = CARTESIAN_POINT ( 'NONE', ( 7.848079232024550000, -31.05414599566027400, 24.39958909080976900 ) ) ; +#3684 = CARTESIAN_POINT ( 'NONE', ( 37.02524706999627600, -94.72219806545337000, 15.44556310733654100 ) ) ; +#3685 = CARTESIAN_POINT ( 'NONE', ( 41.74251306418453600, -9.964424125189689000, -22.67704887054480900 ) ) ; +#3686 = CARTESIAN_POINT ( 'NONE', ( 40.13537752890902500, -95.07596123493894400, 8.991554784011647400 ) ) ; +#3687 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -95.07913965629943200, 12.91381126408363400 ) ) ; +#3688 = CARTESIAN_POINT ( 'NONE', ( 39.20337021064059300, -29.13157158990053100, 22.27911547716284700 ) ) ; +#3689 = LINE ( 'NONE', #2500, #1025 ) ; +#3690 = CARTESIAN_POINT ( 'NONE', ( 3.289515717145020000, -9.840936378274323100, 19.35026901818602200 ) ) ; +#3691 = CARTESIAN_POINT ( 'NONE', ( 5.348897315883669500, -20.48721012962506900, -8.250760705976514200 ) ) ; +#3692 = CARTESIAN_POINT ( 'NONE', ( 36.44211476715069200, -30.44319789695234100, 25.55575678510276200 ) ) ; +#3693 = CARTESIAN_POINT ( 'NONE', ( 39.22150813490900100, -28.98404443291829200, 21.73752165820428300 ) ) ; +#3694 = CARTESIAN_POINT ( 'NONE', ( 0.6990312033972445600, -9.999999999999998200, 13.32741187784718800 ) ) ; +#3695 = CARTESIAN_POINT ( 'NONE', ( 6.351777433650760000, -30.64550119997438700, 22.96429310698232800 ) ) ; +#3696 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999999300, -8.507440058074641000, 13.78058970624844400 ) ) ; +#3697 = CARTESIAN_POINT ( 'NONE', ( 27.51021345255669100, -23.89407525036171300, -27.24367769474892500 ) ) ; +#3698 = CARTESIAN_POINT ( 'NONE', ( 11.13566390212347000, -30.51862271125403600, 26.99982766229028300 ) ) ; +#3699 = LINE ( 'NONE', #3454, #6098 ) ; +#3700 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000900, 17.50000000000000400 ) ) ; +#3701 = CARTESIAN_POINT ( 'NONE', ( 39.26074073614094600, -9.101374230167325100, -24.73051866428499700 ) ) ; +#3702 = CARTESIAN_POINT ( 'NONE', ( 32.86608130530734700, -30.89180855757558700, 27.36072928405781800 ) ) ; +#3703 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -95.07596123493894400, 22.49881262457338600 ) ) ; +#3704 = CARTESIAN_POINT ( 'NONE', ( 13.35441088101654300, -30.85147196126247200, 27.80805574655070700 ) ) ; +#3705 = VERTEX_POINT ( 'NONE', #4406 ) ; +#3706 = CARTESIAN_POINT ( 'NONE', ( 9.382792726244243700, -30.53120291837260300, 26.09013939751611500 ) ) ; +#3707 = CARTESIAN_POINT ( 'NONE', ( 25.76568216881776500, -30.67945339673134300, 28.84385291352983700 ) ) ; +#3708 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, -19.87270537885227700, 23.25917566912281800 ) ) ; +#3709 = CARTESIAN_POINT ( 'NONE', ( 6.712006322907200200, -7.463541018600214000, -25.00000000000000000 ) ) ; +#3710 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#3711 = CARTESIAN_POINT ( 'NONE', ( 38.08692967508886100, -30.35701777315090400, 24.25479195776746300 ) ) ; +#3712 = CARTESIAN_POINT ( 'NONE', ( 34.60174635758171000, -31.09047703111051000, 26.42396215327725500 ) ) ; +#3713 = CARTESIAN_POINT ( 'NONE', ( 33.60214151821406100, -30.28545412666852200, 27.10790303141167400 ) ) ; +#3714 = ORIENTED_EDGE ( 'NONE', *, *, #3234, .F. ) ; +#3715 = CARTESIAN_POINT ( 'NONE', ( 10.09292272124467300, -10.00000000000000000, 25.00000000000000000 ) ) ; +#3716 = CARTESIAN_POINT ( 'NONE', ( 39.47131799463942800, -19.76385840533084300, 12.18956015036681400 ) ) ; +#3717 = CARTESIAN_POINT ( 'NONE', ( 7.551229075017137600, -30.11940998074452100, 24.87746028541105800 ) ) ; +#3718 = EDGE_LOOP ( 'NONE', ( #12756, #13049, #329, #139 ) ) ; +#3719 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3720 = CARTESIAN_POINT ( 'NONE', ( 31.26892787442817900, -95.07596123493893000, 8.644340388083847400 ) ) ; +#3721 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3722 = EDGE_CURVE ( 'NONE', #6124, #3333, #6433, .T. ) ; +#3723 = CARTESIAN_POINT ( 'NONE', ( 39.49913432425857000, -30.29254315139584700, 22.06724523228203700 ) ) ; +#3724 = SECURITY_CLASSIFICATION ( '', '', #7260 ) ; +#3725 = CARTESIAN_POINT ( 'NONE', ( 20.12479207505102300, -31.29794767705910300, 28.74459719081739500 ) ) ; +#3726 = CARTESIAN_POINT ( 'NONE', ( 4.196171286891674500, -18.24410712582601200, -8.222702687655806000 ) ) ; +#3727 = ORIENTED_EDGE ( 'NONE', *, *, #6561, .F. ) ; +#3728 = CARTESIAN_POINT ( 'NONE', ( 36.24959367462526700, -31.16267416057447200, 25.16788374346975100 ) ) ; +#3729 = CARTESIAN_POINT ( 'NONE', ( 27.10866461655624000, -31.21608550868628000, 28.66555962968095600 ) ) ; +#3730 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000000, 3.189999999999994200 ) ) ; +#3731 = ORIENTED_EDGE ( 'NONE', *, *, #1933, .T. ) ; +#3732 = CARTESIAN_POINT ( 'NONE', ( 44.84189452952083600, -6.253918007572966800, 16.99021293114201800 ) ) ; +#3733 = CARTESIAN_POINT ( 'NONE', ( 10.38016432232599100, -95.07596123493895800, 15.73892173084741200 ) ) ; +#3734 = CARTESIAN_POINT ( 'NONE', ( 6.147279852927057100, -29.51179065497057500, 23.20498467749859400 ) ) ; +#3735 = CARTESIAN_POINT ( 'NONE', ( 14.93048937110288700, -38.97427732929012500, 18.99721454164327700 ) ) ; +#3736 = CARTESIAN_POINT ( 'NONE', ( 37.80986000801558300, -23.18843811793772500, -20.03404878039222600 ) ) ; +#3737 = CARTESIAN_POINT ( 'NONE', ( 11.25699665490976300, -31.06236772081577900, 26.89954676296113700 ) ) ; +#3738 = EDGE_LOOP ( 'NONE', ( #4099, #9556, #6187, #7967 ) ) ; +#3739 = AXIS2_PLACEMENT_3D ( 'NONE', #7991, #1869, #9002 ) ; +#3740 = EDGE_LOOP ( 'NONE', ( #10614, #11565, #6818, #5021 ) ) ; +#3741 = ORIENTED_EDGE ( 'NONE', *, *, #796, .T. ) ; +#3742 = CARTESIAN_POINT ( 'NONE', ( 40.63327324390247200, -8.995501985610078000, -24.71039729428554900 ) ) ; +#3743 = CARTESIAN_POINT ( 'NONE', ( 32.66323461112555300, -30.55914077463303300, 27.49516557938388300 ) ) ; +#3744 = CARTESIAN_POINT ( 'NONE', ( 6.767828594827704200, -15.80801960646207900, -22.83276268950940500 ) ) ; +#3745 = CARTESIAN_POINT ( 'NONE', ( 40.49803999293396800, -9.999999999999996400, 20.91762477612128300 ) ) ; +#3746 = CARTESIAN_POINT ( 'NONE', ( 13.35507805472174600, -30.78579467041407700, 27.82034424894424900 ) ) ; +#3747 = CARTESIAN_POINT ( 'NONE', ( 9.508695076520862000, -29.77189715398900900, 26.02799033364956900 ) ) ; +#3748 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -5.000000000000000900, 16.06938735382976400 ) ) ; +#3749 = CARTESIAN_POINT ( 'NONE', ( 6.110263647662994100, -23.25294470837677000, 13.23697626376576900 ) ) ; +#3750 = CARTESIAN_POINT ( 'NONE', ( 36.85586862908942200, -100.0000000000000100, -2.045551259989161900 ) ) ; +#3751 = ORIENTED_EDGE ( 'NONE', *, *, #7548, .T. ) ; +#3752 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884037400E-016, -7.846291988656575200, -15.47621850052125000 ) ) ; +#3753 = CARTESIAN_POINT ( 'NONE', ( 37.51222907419909100, -29.23573433425746200, 24.23295968767719100 ) ) ; +#3754 = ORIENTED_EDGE ( 'NONE', *, *, #11117, .F. ) ; +#3755 = CARTESIAN_POINT ( 'NONE', ( 28.03650122060001200, -21.64193404038969600, -27.05278707894594700 ) ) ; +#3756 = CARTESIAN_POINT ( 'NONE', ( 34.44048122801682200, -30.30641898628229900, 26.72558934154985600 ) ) ; +#3757 = CARTESIAN_POINT ( 'NONE', ( 35.74716843121689200, -29.69872601861894900, 25.84184580526233100 ) ) ; +#3758 = CARTESIAN_POINT ( 'NONE', ( 9.628546774494925100, -9.707448400996073100, 25.00000000000000400 ) ) ; +#3759 = CARTESIAN_POINT ( 'NONE', ( 23.28653519411036800, -33.38451864986031800, 26.50167843114945800 ) ) ; +#3760 = ORIENTED_EDGE ( 'NONE', *, *, #864, .T. ) ; +#3761 = CARTESIAN_POINT ( 'NONE', ( 8.038079243540213500, -31.12201597179348100, 24.50313822273943700 ) ) ; +#3762 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000001400, -23.91420473869547400, -27.45344971053349800 ) ) ; +#3763 = SHAPE_DEFINITION_REPRESENTATION ( #7538, #4433 ) ; +#3764 = CARTESIAN_POINT ( 'NONE', ( 7.179048686225852000, -30.99851587657049400, 23.54034631211963500 ) ) ; +#3765 = CARTESIAN_POINT ( 'NONE', ( 25.98764966474672600, -89.20772034663129100, 11.03354182247858100 ) ) ; +#3766 = VERTEX_POINT ( 'NONE', #7507 ) ; +#3767 = CARTESIAN_POINT ( 'NONE', ( 38.67498639329252800, -28.98205075930122400, 22.61988819015199700 ) ) ; +#3768 = DIRECTION ( 'NONE', ( -0.9997148815268583900, 0.02351517291302031600, 0.004146359440590162100 ) ) ; +#3769 = CARTESIAN_POINT ( 'NONE', ( 5.072578067254735100, -22.34242848819898700, -10.41953274861348600 ) ) ; +#3770 = CARTESIAN_POINT ( 'NONE', ( 36.33999573757261500, -30.24562768628110700, 25.63943903815314200 ) ) ; +#3771 = CARTESIAN_POINT ( 'NONE', ( 3.948507896556653100, -9.940293209034274800, 22.70616892997750500 ) ) ; +#3772 = CARTESIAN_POINT ( 'NONE', ( 27.12029795627759700, -23.89960441319066900, -27.30075163279667500 ) ) ; +#3773 = ORIENTED_EDGE ( 'NONE', *, *, #1125, .F. ) ; +#3774 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3985, #12454, #2696, #2545, #2679, #2651, #2963, #13077, #2253, #1517, #1592, #1269, #1121, #686, #1102, #1054, #1223, #814 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.005523692464351354400, 0.008670510762867294700, 0.01024391991212526500, 0.01181732906138323300, 0.01496414735989917200, 0.01653755650915713800, 0.01732426108378612400, 0.01771761337110061600, 0.01811096565841510300 ), + .UNSPECIFIED. ) ; +#3775 = CARTESIAN_POINT ( 'NONE', ( 45.00000000104003600, -5.284945636417685200, 16.17660970727540000 ) ) ; +#3776 = CARTESIAN_POINT ( 'NONE', ( 13.99583420520866500, -94.71789415297900000, 18.03626465743419200 ) ) ; +#3777 = CYLINDRICAL_SURFACE ( 'NONE', #6126, 5.000000000000000900 ) ; +#3778 = CARTESIAN_POINT ( 'NONE', ( 6.770754996903344900, -30.89218248945837400, 23.03768995141121000 ) ) ; +#3779 = CARTESIAN_POINT ( 'NONE', ( 13.41298476915192600, -32.89644138586430700, 27.36867768153706500 ) ) ; +#3780 = VERTEX_POINT ( 'NONE', #4359 ) ; +#3781 = CARTESIAN_POINT ( 'NONE', ( 43.83413984376659300, -8.211689318662802600, -21.87629666474038000 ) ) ; +#3782 = CARTESIAN_POINT ( 'NONE', ( 11.23133521281543600, -30.64907495880970600, 27.02956525866899900 ) ) ; +#3783 = CARTESIAN_POINT ( 'NONE', ( 10.87885391504585400, -19.31016811081343600, 20.22911644896487000 ) ) ; +#3784 = CARTESIAN_POINT ( 'NONE', ( 2.504369967205439800, -10.44154865655180400, -20.92187104639650000 ) ) ; +#3785 = CARTESIAN_POINT ( 'NONE', ( 40.24010534477802300, -11.33668348429350900, -23.46890603004209200 ) ) ; +#3786 = CARTESIAN_POINT ( 'NONE', ( 32.66674433864344700, -30.78861925905800900, 27.46571531380651600 ) ) ; +#3787 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -89.20772034660431900, 11.03354182248334700 ) ) ; +#3788 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999822400, -5.471098612968095400, -19.72941293731672000 ) ) ; +#3789 = CARTESIAN_POINT ( 'NONE', ( 42.49890297944508400, -9.240536455385902000, -23.55289141356945800 ) ) ; +#3790 = CARTESIAN_POINT ( 'NONE', ( 13.55966620869923700, -30.84514131169832000, 27.87329261835287400 ) ) ; +#3791 = CARTESIAN_POINT ( 'NONE', ( 9.492412542765794800, -30.72941877219596000, 26.08797812267828000 ) ) ; +#3792 = CARTESIAN_POINT ( 'NONE', ( 0.07775222879382696900, 10.13028869250944000, 16.78864349177028000 ) ) ; +#3793 = CARTESIAN_POINT ( 'NONE', ( 14.24758597537451100, -20.16398837647097500, 22.05129773412385300 ) ) ; +#3794 = CARTESIAN_POINT ( 'NONE', ( 30.20916246864325700, -100.0000000000000100, 5.479840347243289500 ) ) ; +#3795 = CARTESIAN_POINT ( 'NONE', ( 5.778371995565854600, -30.43718880997194600, 21.48090201145403500 ) ) ; +#3796 = CARTESIAN_POINT ( 'NONE', ( 37.94258030698071600, -30.12581155411194400, 24.47615010476727400 ) ) ; +#3797 = CARTESIAN_POINT ( 'NONE', ( 34.27067558475792500, -20.64265037239993800, -24.20209385909253200 ) ) ; +#3798 = EDGE_CURVE ( 'NONE', #1818, #11270, #502, .T. ) ; +#3799 = AXIS2_PLACEMENT_3D ( 'NONE', #3363, #10501, #4365 ) ; +#3800 = CARTESIAN_POINT ( 'NONE', ( 34.44047841155211400, -30.90067682859983500, 26.62081504584828200 ) ) ; +#3801 = CARTESIAN_POINT ( 'NONE', ( 37.67827027419474500, -29.19525914551121600, 24.03741102888750400 ) ) ; +#3802 = CIRCLE ( 'NONE', #658, 2.499999999999996900 ) ; +#3803 = CARTESIAN_POINT ( 'NONE', ( 9.147622324862444600, -9.452036835833817800, 25.00000000000000400 ) ) ; +#3804 = AXIS2_PLACEMENT_3D ( 'NONE', #1975, #9111, #2991 ) ; +#3805 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -39.52045731841470700, 19.79474689191102900 ) ) ; +#3806 = ORIENTED_EDGE ( 'NONE', *, *, #12910, .F. ) ; +#3807 = CARTESIAN_POINT ( 'NONE', ( 7.724028216254624500, -30.38846593352810300, 24.97951911266713100 ) ) ; +#3808 = CARTESIAN_POINT ( 'NONE', ( 10.80317205794611400, -89.38768284283594300, 7.844758748653493500 ) ) ; +#3809 = CARTESIAN_POINT ( 'NONE', ( 16.96440141369283000, -21.64261150281316000, -27.05290653385744500 ) ) ; +#3810 = CARTESIAN_POINT ( 'NONE', ( 9.081167610733933400, -31.16968662219008500, 25.44537160410457200 ) ) ; +#3811 = DIRECTION ( 'NONE', ( -1.000000000000000000, -8.673617379884034500E-016, 0.0000000000000000000 ) ) ; +#3812 = CARTESIAN_POINT ( 'NONE', ( 44.87231522506262100, 10.30553923381151500, -22.97446304501251300 ) ) ; +#3813 = CARTESIAN_POINT ( 'NONE', ( 39.58373677505867500, -29.97997164482989500, 22.44418987330080000 ) ) ; +#3814 = CARTESIAN_POINT ( 'NONE', ( 33.16432293037952000, -32.49544864990944900, 24.95848365696237500 ) ) ; +#3815 = CARTESIAN_POINT ( 'NONE', ( 5.066768447400678000, -20.04430518144410200, -10.05558935585077800 ) ) ; +#3816 = CARTESIAN_POINT ( 'NONE', ( 36.21585983536000000, -31.05386805429472100, 25.32525120182824800 ) ) ; +#3817 = CARTESIAN_POINT ( 'NONE', ( 7.955099402481796900, -10.44564705057141500, 24.99999999999999300 ) ) ; +#3818 = CARTESIAN_POINT ( 'NONE', ( 29.20771274931740900, -20.83272222044811900, -26.31001074562485400 ) ) ; +#3819 = EDGE_CURVE ( 'NONE', #11868, #105, #1037, .T. ) ; +#3820 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -19.99999999999989700, 8.005331014629277300 ) ) ; +#3821 = CARTESIAN_POINT ( 'NONE', ( 8.170638041510475300, -8.975182257297978700, 25.00000000000000400 ) ) ; +#3822 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #8598, #4759, #4479 ), + ( #11629, #5525, #12589 ), + ( #6558, #504, #7608 ), + ( #1495, #8636, #2496 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0001256340864446195100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7941643989882853900, 1.000000000000000000), + ( 1.000000000000000000, 0.7941643989240007000, 1.000000000000000000), + ( 1.000000000000000000, 0.7941588266965200500, 1.000000000000000000), + ( 1.000000000000000000, 0.7941476793044252000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3823 = CARTESIAN_POINT ( 'NONE', ( 6.150185330482483600, -29.92455045133026600, 23.42883158056198300 ) ) ; +#3824 = FACE_OUTER_BOUND ( 'NONE', #3265, .T. ) ; +#3825 = CARTESIAN_POINT ( 'NONE', ( 15.74280234787657300, -31.89480662234651800, 20.52754327232825600 ) ) ; +#3826 = CARTESIAN_POINT ( 'NONE', ( 11.25706528652178500, -30.24923945646669700, 27.04277464181934900 ) ) ; +#3827 = CARTESIAN_POINT ( 'NONE', ( 7.890120889755991100, -19.48760749093298700, 17.08472812432514600 ) ) ; +#3828 = CARTESIAN_POINT ( 'NONE', ( 38.88981428387013000, -23.25305993131263100, 13.23676343042643000 ) ) ; +#3829 = CARTESIAN_POINT ( 'NONE', ( 41.31308791267253600, -10.09247040908623600, -23.12511075390666800 ) ) ; +#3830 = CARTESIAN_POINT ( 'NONE', ( 32.25896959465780600, -30.61528268970620200, 27.63793442396774200 ) ) ; +#3831 = CARTESIAN_POINT ( 'NONE', ( 18.89208858415091900, -39.48871152069521200, 19.80034453257308900 ) ) ; +#3832 = CARTESIAN_POINT ( 'NONE', ( 15.65273288871555500, -28.08123352512465900, 26.96594673378586300 ) ) ; +#3833 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, -1.200000000000012600 ) ) ; +#3834 = CARTESIAN_POINT ( 'NONE', ( 13.56048168335294000, -30.81496026082923100, 27.87905002703995200 ) ) ; +#3835 = CARTESIAN_POINT ( 'NONE', ( 9.552727990228225600, -29.96562264692146700, 26.12722531548927000 ) ) ; +#3836 = FACE_OUTER_BOUND ( 'NONE', #8293, .T. ) ; +#3837 = CARTESIAN_POINT ( 'NONE', ( 16.33200581722710300, -94.74466040478736800, 18.43525633179982400 ) ) ; +#3838 = CARTESIAN_POINT ( 'NONE', ( 24.85931091070667900, -27.98733298566477100, 27.51102980484079600 ) ) ; +#3839 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 9.500000000000000000, 15.51856112887630200 ) ) ; +#3840 = CARTESIAN_POINT ( 'NONE', ( 5.219878529373765700, -29.31183443051719500, 21.67933151578574400 ) ) ; +#3841 = CARTESIAN_POINT ( 'NONE', ( 37.53001572309502600, -31.03504596535879800, 23.93237203300803600 ) ) ; +#3842 = CARTESIAN_POINT ( 'NONE', ( 29.64042252736467700, -14.37079327095058900, -25.77068878076756100 ) ) ; +#3843 = CARTESIAN_POINT ( 'NONE', ( 34.13007915490521100, -30.18131968329195700, 26.85693490635889100 ) ) ; +#3844 = CARTESIAN_POINT ( 'NONE', ( 38.42998794236005000, -29.01810800699279000, 22.99734877720903000 ) ) ; +#3845 = FACE_OUTER_BOUND ( 'NONE', #1700, .T. ) ; +#3846 = CARTESIAN_POINT ( 'NONE', ( 7.674409514779278600, -8.754117843983161500, 24.99999999999999600 ) ) ; +#3847 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999990400, -100.0000000000000300, -38.36942826376123600 ) ) ; +#3848 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12602, #7621, #9652, #3525, #10658, #4537, #11678, #5579, #12646, #6619, #548, #7662, #1552, #8690, #2554, #9695, #3568, #10698, #4581, #11725, #5620, #12684, #6852, #767, #7885, #1768, #8906, #2775, #9910, #3783, #10920, #4812, #11931, #5846, #12886, #6891, #810, #7931, #1807, #8947, #2822, #9953, #3827, #10968, #4857, #11967, #5890, #12923, #6936, #849, #7978, #1856, #8990, #2869, #10000, #3870, #11012, #4904, #12011, #5931, #12964, #6985, #893, #8019, #1904, #9037, #2912, #10041, #3914, #11058, #4947, #12052, #5977, #13007, #7034, #941, #8060, #1942, #9082, #2956, #10081, #3958, #11106, #4987, #12095, #6024, #13047, #7077 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 1, 2, 2, 2, 2, 1, 1, 2, 2, 2, 2, 1, 1, 2, 2, 2, 2, 1, 1, 1, 2, 2, 2, 2, 1, 1, 1, 1, 2, 2, 2, 2, 1, 1, 1, 1, 2, 2, 2, 2, 1, 1, 1, 1, 2, 2, 4 ), + ( 0.0000000000000000000, 0.06250000000000563400, 0.09375000000000847900, 0.1093750000000099400, 0.1250000000000113800, 0.1875000000000171000, 0.2187500000000202300, 0.2343750000000217900, 0.2421875000000224000, 0.2500000000000229800, 0.3125000000000305300, 0.3437500000000343600, 0.3593750000000361400, 0.3671875000000368600, 0.3710937500000373600, 0.3750000000000378000, 0.4375000000000464100, 0.4687500000000505200, 0.4843750000000527400, 0.4921875000000537900, 0.4960937500000542300, 0.5000000000000546200, 0.5625000000000626200, 0.5937500000000663900, 0.6093750000000682800, 0.6171875000000689400, 0.6210937500000695000, 0.6230468750000696100, 0.6250000000000697200, 0.6875000000000745000, 0.7187500000000770500, 0.7343750000000782700, 0.7421875000000791600, 0.7460937500000793800, 0.7480468750000793800, 0.7490234375000793800, 0.7500000000000793800, 0.8125000000000690600, 0.8437500000000638400, 0.8593750000000611700, 0.8671875000000597300, 0.8710937500000590600, 0.8730468750000586200, 0.8740234375000582900, 0.8750000000000578400, 0.9062500000000527400, 0.9218750000000500700, 0.9296875000000487400, 0.9335937500000479600, 0.9355468750000476300, 0.9365234375000473000, 0.9370117187500473000, 0.9375000000000471800, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#3849 = CARTESIAN_POINT ( 'NONE', ( 8.024840414509782200, -29.39868047115333700, 24.82200971729923500 ) ) ; +#3850 = CARTESIAN_POINT ( 'NONE', ( 16.86502600400509200, -17.32305461394013700, -26.29125210963920600 ) ) ; +#3851 = CARTESIAN_POINT ( 'NONE', ( 11.45089845196207200, -31.04650581342682300, 27.00085101060592800 ) ) ; +#3852 = CARTESIAN_POINT ( 'NONE', ( 10.87831383334415000, -17.10102035287565400, -24.82276602564913000 ) ) ; +#3853 = CARTESIAN_POINT ( 'NONE', ( 42.83041338557480100, 11.38346697805856100, -24.15206692787417700 ) ) ; +#3854 = AXIS2_PLACEMENT_3D ( 'NONE', #8959, #2836, #9964 ) ; +#3855 = CARTESIAN_POINT ( 'NONE', ( 38.64632538875248700, -30.75429521962697200, 22.30774221248674000 ) ) ; +#3856 = ORIENTED_EDGE ( 'NONE', *, *, #6323, .F. ) ; +#3857 = CARTESIAN_POINT ( 'NONE', ( 19.88870589247789100, -23.87765575674304600, -27.44700513889785000 ) ) ; +#3858 = CARTESIAN_POINT ( 'NONE', ( 4.040738944990538400, -17.99970937843870500, -9.628015282361642900 ) ) ; +#3859 = CYLINDRICAL_SURFACE ( 'NONE', #8601, 1.200000000000005700 ) ; +#3860 = CARTESIAN_POINT ( 'NONE', ( 36.09254445386152100, -29.91934907933642400, 25.72751396603603900 ) ) ; +#3861 = CARTESIAN_POINT ( 'NONE', ( 10.50413247409284000, -10.26477100360097300, 25.00000000000000000 ) ) ; +#3862 = CARTESIAN_POINT ( 'NONE', ( 33.95148745466480700, -18.03145836275808400, -25.46095989106852300 ) ) ; +#3863 = CARTESIAN_POINT ( 'NONE', ( 4.138360505872719300, -7.346822827177223100, 25.00000000000000000 ) ) ; +#3864 = CARTESIAN_POINT ( 'NONE', ( 15.86582910864390400, -7.497989335515328900, -32.61353404113975800 ) ) ; +#3865 = CARTESIAN_POINT ( 'NONE', ( 6.794015883385709400, -29.07016364672609400, 23.34970644451474100 ) ) ; +#3866 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -7.272790328173280200, 13.03997693873112200 ) ) ; +#3867 = CARTESIAN_POINT ( 'NONE', ( 11.73247585298934900, -99.99999999999998600, 20.35471749731305700 ) ) ; +#3868 = CARTESIAN_POINT ( 'NONE', ( 11.43073238871554400, -30.75674802713176300, 27.09800442546471200 ) ) ; +#3869 = EDGE_LOOP ( 'NONE', ( #8473, #5807, #9092, #12372 ) ) ; +#3870 = CARTESIAN_POINT ( 'NONE', ( 6.230025420636948800, -19.65563665322514500, 14.10720967979480800 ) ) ; +#3871 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -27.02959941701421100, 6.855609505493158700 ) ) ; +#3872 = CARTESIAN_POINT ( 'NONE', ( 32.09863200989554600, -10.43079757070502500, -25.07596123493895100 ) ) ; +#3873 = CARTESIAN_POINT ( 'NONE', ( 32.25990270149849700, -30.76400720845304800, 27.61964079584795300 ) ) ; +#3874 = VERTEX_POINT ( 'NONE', #4279 ) ; +#3875 = CARTESIAN_POINT ( 'NONE', ( 14.64401581384277400, -38.92038764229494800, 18.90744411550686600 ) ) ; +#3876 = CARTESIAN_POINT ( 'NONE', ( 14.74628682731402100, -28.11094004036105400, 26.76234958553671100 ) ) ; +#3877 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999990400, -12.49999999999998400, -22.94081745177112800 ) ) ; +#3878 = CARTESIAN_POINT ( 'NONE', ( 13.55966422434717900, -30.78696779287285400, 27.88354895434515900 ) ) ; +#3879 = CARTESIAN_POINT ( 'NONE', ( 9.824916532478630100, -31.01622025733167100, 26.12378044252607600 ) ) ; +#3880 = CARTESIAN_POINT ( 'NONE', ( 10.49950518383916400, -15.63308228032930100, -24.93184914140738000 ) ) ; +#3881 = ORIENTED_EDGE ( 'NONE', *, *, #2449, .F. ) ; +#3882 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -27.09143239524033600, 6.754920151478383000 ) ) ; +#3883 = CARTESIAN_POINT ( 'NONE', ( 37.98794197520392400, -93.12096545615867200, 19.59007606321782500 ) ) ; +#3884 = ORIENTED_EDGE ( 'NONE', *, *, #7791, .F. ) ; +#3885 = CARTESIAN_POINT ( 'NONE', ( 6.056783717505974000, -30.56480851265513000, 21.52614629120975900 ) ) ; +#3886 = CARTESIAN_POINT ( 'NONE', ( 37.70441586332843500, -29.82927728878393500, 24.58094963256082400 ) ) ; +#3887 = ORIENTED_EDGE ( 'NONE', *, *, #3341, .F. ) ; +#3888 = CARTESIAN_POINT ( 'NONE', ( 37.89588601060673800, -15.08033554664924800, -25.89580022792795300 ) ) ; +#3889 = ORIENTED_EDGE ( 'NONE', *, *, #6917, .F. ) ; +#3890 = CARTESIAN_POINT ( 'NONE', ( 34.16157665771380200, -30.71202477430298200, 26.82975981322331900 ) ) ; +#3891 = CARTESIAN_POINT ( 'NONE', ( 38.85424418037905500, -28.91555551986543200, 22.16242832305061600 ) ) ; +#3892 = ORIENTED_EDGE ( 'NONE', *, *, #9725, .F. ) ; +#3893 = CARTESIAN_POINT ( 'NONE', ( 19.16663500514976800, -100.0000000000000300, -38.36942826376122900 ) ) ; +#3894 = ORIENTED_EDGE ( 'NONE', *, *, #2062, .F. ) ; +#3895 = CARTESIAN_POINT ( 'NONE', ( 8.147528722543523100, -30.70241266620338600, 25.12916109314337400 ) ) ; +#3896 = CARTESIAN_POINT ( 'NONE', ( 7.825731380563205200, -19.18662930247960600, -21.75712627756109500 ) ) ; +#3897 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3898 = CARTESIAN_POINT ( 'NONE', ( 10.97432196354809100, -20.06356975528346700, -24.57316959020969100 ) ) ; +#3899 = CARTESIAN_POINT ( 'NONE', ( 42.89783639651325600, 11.98845711938676900, -22.89783639651174200 ) ) ; +#3900 = EDGE_CURVE ( 'NONE', #3589, #11214, #9152, .T. ) ; +#3901 = ORIENTED_EDGE ( 'NONE', *, *, #1617, .T. ) ; +#3902 = CARTESIAN_POINT ( 'NONE', ( 39.36598260861764900, -29.67832901697391900, 22.72719746919468900 ) ) ; +#3903 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, 51.02052347080197600, 26.62899292861735700 ) ) ; +#3904 = ORIENTED_EDGE ( 'NONE', *, *, #8898, .F. ) ; +#3905 = CARTESIAN_POINT ( 'NONE', ( 36.13616311147546900, -30.74991214922165700, 25.64368736427461900 ) ) ; +#3906 = CARTESIAN_POINT ( 'NONE', ( 36.38931574554231200, -23.38780664976582100, -22.04534128939430800 ) ) ; +#3907 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -89.20772034660431900, 11.03354182248334900 ) ) ; +#3908 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, -1.981438871123700300 ) ) ; +#3909 = CARTESIAN_POINT ( 'NONE', ( -1.152732831986561100, -7.681006104485968300, -13.00553780162035400 ) ) ; +#3910 = CARTESIAN_POINT ( 'NONE', ( 6.448944942568338100, -30.27708155839806600, 23.71391792943488100 ) ) ; +#3911 = CARTESIAN_POINT ( 'NONE', ( 44.31263887845565800, -10.08218536758984600, 13.13358237387788700 ) ) ; +#3912 = CARTESIAN_POINT ( 'NONE', ( 32.05537756428017800, -30.68774478806391000, 27.70099969745999500 ) ) ; +#3913 = CARTESIAN_POINT ( 'NONE', ( 11.44497203112431900, -30.36198717876340700, 27.13508375601455900 ) ) ; +#3914 = CARTESIAN_POINT ( 'NONE', ( 5.311746204975384500, -19.82388944291521300, 11.12588495057365800 ) ) ; +#3915 = CARTESIAN_POINT ( 'NONE', ( 44.43564909150241200, -7.899871450772520700, -19.64130939705575000 ) ) ; +#3916 = VERTEX_POINT ( 'NONE', #5853 ) ; +#3917 = CARTESIAN_POINT ( 'NONE', ( 32.87431312921364700, -10.03795961523222300, -24.99999999999942400 ) ) ; +#3918 = CARTESIAN_POINT ( 'NONE', ( 32.25897300072804100, -30.92227998810087500, 27.58382517043828800 ) ) ; +#3919 = CARTESIAN_POINT ( 'NONE', ( 7.071552344654755900, -34.63255565472211800, 13.15245032503497800 ) ) ; +#3920 = CARTESIAN_POINT ( 'NONE', ( 13.85365508797150500, -28.14441943532962400, 26.49567723798048700 ) ) ; +#3921 = CARTESIAN_POINT ( 'NONE', ( 5.046605089795745500, -22.31012147982193000, -10.70496722465032300 ) ) ; +#3922 = EDGE_LOOP ( 'NONE', ( #9963, #10283, #10600, #7457 ) ) ; +#3923 = CARTESIAN_POINT ( 'NONE', ( 13.66312825135142200, -30.82427677842598600, 27.90827751629489800 ) ) ; +#3924 = CARTESIAN_POINT ( 'NONE', ( 9.775386420736660800, -30.32787068262769400, 26.32775854514423100 ) ) ; +#3925 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.819660112500978100, -11.53187062879840900 ) ) ; +#3926 = CARTESIAN_POINT ( 'NONE', ( 5.004506587315207300, -27.59921077486878700, 9.242619021003156000 ) ) ; +#3927 = CARTESIAN_POINT ( 'NONE', ( 31.52822049176448600, -97.49637904390284900, 21.28619212682579900 ) ) ; +#3928 = CARTESIAN_POINT ( 'NONE', ( 4.999992876310089200, -29.66370377963937000, 21.68574683115906200 ) ) ; +#3929 = CARTESIAN_POINT ( 'NONE', ( 37.59327761247179500, -30.80848304391324200, 24.30073632353523600 ) ) ; +#3930 = AXIS2_PLACEMENT_3D ( 'NONE', #3419, #10554, #4430 ) ; +#3931 = FACE_OUTER_BOUND ( 'NONE', #7124, .T. ) ; +#3932 = CARTESIAN_POINT ( 'NONE', ( 34.03028129593153700, -30.17181371805090300, 26.90176759594929800 ) ) ; +#3933 = ORIENTED_EDGE ( 'NONE', *, *, #11179, .F. ) ; +#3934 = CARTESIAN_POINT ( 'NONE', ( -1.163823269527408700E-015, 9.723972447247824400, -1.698850734653958100 ) ) ; +#3935 = CARTESIAN_POINT ( 'NONE', ( 19.16663500514976800, -12.49999999999998400, -22.94081745177112500 ) ) ; +#3936 = CARTESIAN_POINT ( 'NONE', ( 8.216024876519711000, -29.76776701530562300, 25.21125824516937200 ) ) ; +#3937 = CARTESIAN_POINT ( 'NONE', ( 7.103198750586590100, -15.07985494215513500, -25.89571548438343400 ) ) ; +#3938 = CARTESIAN_POINT ( 'NONE', ( 44.47213083400070100, -11.05573833199855800, -11.53187062880260200 ) ) ; +#3939 = CARTESIAN_POINT ( 'NONE', ( 24.81280616483602200, -30.65917406624153000, 28.85723021296909600 ) ) ; +#3940 = CARTESIAN_POINT ( 'NONE', ( 24.99264576486652000, -27.96523496585091800, 27.45710953202297200 ) ) ; +#3941 = CARTESIAN_POINT ( 'NONE', ( 38.61862639689781700, -30.75817190704436800, 22.49795654217843900 ) ) ; +#3942 = VECTOR ( 'NONE', #12215, 1000.000000000000000 ) ; +#3943 = VERTEX_POINT ( 'NONE', #3561 ) ; +#3944 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -31.29513776008465000, 28.74509265499354200 ) ) ; +#3945 = CARTESIAN_POINT ( 'NONE', ( 35.92600112596159800, -29.67389251491138000, 25.72002459952595300 ) ) ; +#3946 = EDGE_CURVE ( 'NONE', #6647, #5939, #3395, .T. ) ; +#3947 = PLANE ( 'NONE', #9975 ) ; +#3948 = CARTESIAN_POINT ( 'NONE', ( 38.48974357041023400, -20.37015320496722400, -18.27658803843385700 ) ) ; +#3949 = AXIS2_PLACEMENT_3D ( 'NONE', #10474, #4343, #11491 ) ; +#3950 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -95.24421259199486700, 8.331288511295822400 ) ) ; +#3951 = CARTESIAN_POINT ( 'NONE', ( 1.999057592595437900, -7.775819397170343100, -22.71867333393831200 ) ) ; +#3952 = CARTESIAN_POINT ( 'NONE', ( 6.924613983965469900, -29.17221938477958400, 23.63460550397298500 ) ) ; +#3953 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999999300, -9.028743134157741300, 12.61898436838468600 ) ) ; +#3954 = CARTESIAN_POINT ( 'NONE', ( 32.05503871718794800, -30.82150268993706300, 27.67987103785052100 ) ) ; +#3955 = CARTESIAN_POINT ( 'NONE', ( 10.76370865896492600, -12.34547275412262100, 24.58643444490503400 ) ) ; +#3956 = CARTESIAN_POINT ( 'NONE', ( 11.53734504177738200, -30.91504713968359800, 27.09694712575310400 ) ) ; +#3957 = CIRCLE ( 'NONE', #77, 7.500000000000000900 ) ; +#3958 = CARTESIAN_POINT ( 'NONE', ( 5.075172306386373400, -19.91318371873256500, 9.543658691291636100 ) ) ; +#3959 = CARTESIAN_POINT ( 'NONE', ( 43.45384065053926300, -9.342982715252896100, 16.69803611612571700 ) ) ; +#3960 = CARTESIAN_POINT ( 'NONE', ( 33.77196988126281200, -10.08085583885768300, -25.00000000000000000 ) ) ; +#3961 = CARTESIAN_POINT ( 'NONE', ( 5.001065529352991300, -27.30757075486902300, 6.926512319300449900 ) ) ; +#3962 = CARTESIAN_POINT ( 'NONE', ( 12.12754680332600400, -28.22268083571613300, 25.84846242060969600 ) ) ; +#3963 = CARTESIAN_POINT ( 'NONE', ( 5.034473317993453100, -20.00257534710669200, -10.42870966618860800 ) ) ; +#3964 = CARTESIAN_POINT ( 'NONE', ( 13.66283595828782200, -30.80928951482383800, 27.91083501908583000 ) ) ; +#3965 = CARTESIAN_POINT ( 'NONE', ( 10.04001424245818400, -31.14682934864916000, 26.16400339991858800 ) ) ; +#3966 = CARTESIAN_POINT ( 'NONE', ( 1.922941429562304800, -8.947896442525781400, 19.77387508180603200 ) ) ; +#3967 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3968 = CARTESIAN_POINT ( 'NONE', ( 26.04488161931117300, -94.74682992291739900, 18.71443453787028900 ) ) ; +#3969 = FACE_OUTER_BOUND ( 'NONE', #3096, .T. ) ; +#3970 = CARTESIAN_POINT ( 'NONE', ( 6.058456319236065600, -28.87897703185082700, 21.82350371404477600 ) ) ; +#3971 = CARTESIAN_POINT ( 'NONE', ( 37.19781872516347900, -29.48543467085048400, 24.72616167687840500 ) ) ; +#3972 = ORIENTED_EDGE ( 'NONE', *, *, #1933, .F. ) ; +#3973 = CARTESIAN_POINT ( 'NONE', ( 25.01430408885889300, -27.96569310774422600, 27.45698462770358700 ) ) ; +#3974 = EDGE_CURVE ( 'NONE', #7050, #3333, #3699, .T. ) ; +#3975 = LINE ( 'NONE', #9950, #9118 ) ; +#3976 = CARTESIAN_POINT ( 'NONE', ( 34.06405323694546200, -30.60402209410803600, 26.89807584782569400 ) ) ; +#3977 = CARTESIAN_POINT ( 'NONE', ( 28.93050178669621900, -20.03732252718390000, 22.70479737726168400 ) ) ; +#3978 = CARTESIAN_POINT ( 'NONE', ( 18.34199828593765200, -100.0000000000000300, -38.28538062099280400 ) ) ; +#3979 = CARTESIAN_POINT ( 'NONE', ( 8.449056367387413500, -31.04086164086317400, 25.04770605165684200 ) ) ; +#3980 = CARTESIAN_POINT ( 'NONE', ( 0.5277476918604499000, -11.05563473011668800, 7.974211296827038900 ) ) ; +#3981 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122092400, 0.1736481776669238900 ) ) ; +#3982 = CARTESIAN_POINT ( 'NONE', ( 38.71995095737680300, -29.36403668257703400, 23.20575113040496300 ) ) ; +#3983 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3882, #12024, #3926, #11069, #4958, #12066, #5989, #13016, #7045, #955, #8072, #1952, #9093, #2970 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( -3.014604540363582300E-005, 0.003778322500954955200, 0.007586791047313546200, 0.009491025320492837300, 0.01139525959367213000, 0.01329949386685142100, 0.01520372814003071400 ), + .UNSPECIFIED. ) ; +#3984 = CYLINDRICAL_SURFACE ( 'NONE', #4597, 2.000000000000001800 ) ; +#3985 = CARTESIAN_POINT ( 'NONE', ( 8.343828509952652800, -18.01237507300752600, -23.06837513076480000 ) ) ; +#3986 = CARTESIAN_POINT ( 'NONE', ( 36.07615482380440900, -30.51520063649815400, 25.79082564184494300 ) ) ; +#3987 = EDGE_CURVE ( 'NONE', #1233, #3401, #11314, .T. ) ; +#3988 = CARTESIAN_POINT ( 'NONE', ( 26.24072192428392500, -19.90880266655389600, 23.24451361495614100 ) ) ; +#3989 = CARTESIAN_POINT ( 'NONE', ( 40.32242098421596000, -17.95390778824917900, -16.71904889148746100 ) ) ; +#3990 = EDGE_CURVE ( 'NONE', #1250, #6296, #8962, .T. ) ; +#3991 = CARTESIAN_POINT ( 'NONE', ( 38.64600097093651200, -94.17920530917930900, 6.208122608113883200 ) ) ; +#3992 = CARTESIAN_POINT ( 'NONE', ( 0.02832571919072552500, 9.894175532731914300, -1.388698443143499400 ) ) ; +#3993 = CARTESIAN_POINT ( 'NONE', ( 10.89685545868298200, -10.00000000000000000, -29.66859204632966000 ) ) ; +#3994 = CARTESIAN_POINT ( 'NONE', ( 6.732206579768319300, -30.65831553180787200, 23.63608730249169600 ) ) ; +#3995 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -7.807933588545776800, 12.02151684499006200 ) ) ; +#3996 = CARTESIAN_POINT ( 'NONE', ( 31.74854989821239600, -30.72490431317554300, 27.79641736144409900 ) ) ; +#3997 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -8.323036542205249900E-015, 25.00105000000004200 ) ) ; +#3998 = CARTESIAN_POINT ( 'NONE', ( 11.53232918312626000, -30.54414843552692100, 27.17382814181685500 ) ) ; +#3999 = FACE_BOUND ( 'NONE', #4216, .T. ) ; +#4000 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4001 = CARTESIAN_POINT ( 'NONE', ( 9.355620173577026600, -12.49999999999999300, -16.89708163240512200 ) ) ; +#4002 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -97.57595464680710500, 13.49312408421980400 ) ) ; +#4003 = CARTESIAN_POINT ( 'NONE', ( 11.29091462194936000, -28.26748272103437300, 25.46783778535464600 ) ) ; +#4004 = CARTESIAN_POINT ( 'NONE', ( 13.69896521564827900, -100.0000000000000300, 4.926333178542757100 ) ) ; +#4005 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344970100, 27.93780948130441300 ) ) ; +#4006 = DIRECTION ( 'NONE', ( 0.01909913463759153200, -0.9998175948922358700, 0.0000000000000000000 ) ) ; +#4007 = CARTESIAN_POINT ( 'NONE', ( 9.956105668248206100, -30.53188306783046000, 26.41746345309980300 ) ) ; +#4008 = CARTESIAN_POINT ( 'NONE', ( 10.26057644352793500, -12.19623197613733500, 24.38134862614858300 ) ) ; +#4009 = CARTESIAN_POINT ( 'NONE', ( 40.07102107737934900, -10.27640698109845900, -24.99999999998016500 ) ) ; +#4010 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4011 = CARTESIAN_POINT ( 'NONE', ( 5.112241595768469300, -30.00492310492639800, 21.68891784339090700 ) ) ; +#4012 = FACE_OUTER_BOUND ( 'NONE', #4821, .T. ) ; +#4013 = CARTESIAN_POINT ( 'NONE', ( 37.43996490941989900, -30.48155854996615900, 24.80542000195091400 ) ) ; +#4014 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6663, #8686, #9648, #9691, #9733, #10011, #10573, #10655, #10695, #10786, #11600, #11641, #11675, #12644, #1466, #1503, #2549, #8559, #3442, #4620 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.01673300446180293900, 0.01860468515099937900, 0.02047636584019582200, 0.02234804652939226300, 0.02421972721858870600, 0.02796308859698158300, 0.02983476928617802600, 0.03077060963077624800, 0.03123852980307535700, 0.03170644997537446600 ), + .UNSPECIFIED. ) ; +#4015 = CARTESIAN_POINT ( 'NONE', ( 23.27095205761738600, -31.32859295633349500, 28.73919360124997300 ) ) ; +#4016 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6451, #403, #9540, #3411 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#4017 = CARTESIAN_POINT ( 'NONE', ( 34.03191530303395500, -31.07607110199441500, 26.74583769894432100 ) ) ; +#4018 = CARTESIAN_POINT ( 'NONE', ( 31.09903346441187800, -27.25264090243095800, 20.68906578370115700 ) ) ; +#4019 = ORIENTED_EDGE ( 'NONE', *, *, #10998, .F. ) ; +#4020 = CARTESIAN_POINT ( 'NONE', ( 0.07775222879382673300, 10.13028869250944000, -0.7113565082297220700 ) ) ; +#4021 = CARTESIAN_POINT ( 'NONE', ( 18.34199828593765200, -12.49999999999998400, -22.85676980900269600 ) ) ; +#4022 = CARTESIAN_POINT ( 'NONE', ( 8.293600834506833100, -30.19011287653382100, 25.39469472314040400 ) ) ; +#4023 = FACE_BOUND ( 'NONE', #6394, .T. ) ; +#4024 = CARTESIAN_POINT ( 'NONE', ( 9.744527867771919800, -10.69524738058282800, 24.87740912853636700 ) ) ; +#4025 = CARTESIAN_POINT ( 'NONE', ( 1.890385014232320000E-014, -10.00003324152129400, 8.013891670221548600 ) ) ; +#4026 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000008500, -9.999963516710225900, -11.57189437876170300 ) ) ; +#4027 = CARTESIAN_POINT ( 'NONE', ( 39.23457053030380600, -28.80181609353123000, 24.07040313373198600 ) ) ; +#4028 = CARTESIAN_POINT ( 'NONE', ( 38.72000297537946500, -30.58199320133876500, 22.98878863104736300 ) ) ; +#4029 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3470, #3495, #3508, #3455 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.5088892147902976900 ), + .UNSPECIFIED. ) ; +#4030 = CARTESIAN_POINT ( 'NONE', ( 9.671394245789608500, -28.37820280459834200, 24.59181513456493600 ) ) ; +#4031 = VERTEX_POINT ( 'NONE', #3006 ) ; +#4032 = CARTESIAN_POINT ( 'NONE', ( 35.91853983786326400, -31.16957889170478800, 25.44541092048639500 ) ) ; +#4033 = CARTESIAN_POINT ( 'NONE', ( 39.96595612801560500, -22.47950268248286300, -13.03418439869137700 ) ) ; +#4034 = EDGE_LOOP ( 'NONE', ( #2571, #293, #2139, #4183 ) ) ; +#4035 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -91.87365618055717700, -1.973424355165508200 ) ) ; +#4036 = CARTESIAN_POINT ( 'NONE', ( 0.09708713634879585800, 10.18993461597465900, -0.3605037269888274300 ) ) ; +#4037 = CARTESIAN_POINT ( 'NONE', ( 16.71012092569722200, -100.0000000000000300, -37.94977236663729100 ) ) ; +#4038 = CARTESIAN_POINT ( 'NONE', ( 20.14922839201824400, -20.87025052225377000, -26.95197311310865700 ) ) ; +#4039 = CARTESIAN_POINT ( 'NONE', ( 6.732198264056491700, -29.51329817736569100, 23.83753120032307700 ) ) ; +#4040 = CARTESIAN_POINT ( 'NONE', ( 44.33634496261966300, -10.24344436485604400, 12.69702801762196000 ) ) ; +#4041 = CARTESIAN_POINT ( 'NONE', ( 31.74729195475434200, -30.80274669762059500, 27.78481733177962800 ) ) ; +#4042 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4043 = CARTESIAN_POINT ( 'NONE', ( 11.74308283693168400, -31.01101470683563100, 27.15053504208603400 ) ) ; +#4044 = CARTESIAN_POINT ( 'NONE', ( 29.44153720350376000, -100.0000000000000100, -37.54596735492514600 ) ) ; +#4045 = CARTESIAN_POINT ( 'NONE', ( 18.34817737760575400, -12.49999999999999500, -22.85684769761069600 ) ) ; +#4046 = ORIENTED_EDGE ( 'NONE', *, *, #10718, .F. ) ; +#4047 = ORIENTED_EDGE ( 'NONE', *, *, #8357, .F. ) ; +#4048 = AXIS2_PLACEMENT_3D ( 'NONE', #432, #397, #357 ) ; +#4049 = CARTESIAN_POINT ( 'NONE', ( 9.719151204820160900, -11.86612233832491900, 24.28144369359099700 ) ) ; +#4050 = CARTESIAN_POINT ( 'NONE', ( 8.884846497569377300, -28.44416463842283000, 24.09292141866741600 ) ) ; +#4051 = CARTESIAN_POINT ( 'NONE', ( 4.003272743848318900, -17.94561453042021900, -10.09898228137968000 ) ) ; +#4052 = ORIENTED_EDGE ( 'NONE', *, *, #9894, .F. ) ; +#4053 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344970500, 27.93780948130441300 ) ) ; +#4054 = CARTESIAN_POINT ( 'NONE', ( 40.78907425328560500, -18.42185149342870400, -10.75399203474277800 ) ) ; +#4055 = EDGE_CURVE ( 'NONE', #5510, #2930, #11208, .T. ) ; +#4056 = CARTESIAN_POINT ( 'NONE', ( 44.90291286365121700, 10.18993461597465900, 0.3605037269888277700 ) ) ; +#4057 = CARTESIAN_POINT ( 'NONE', ( 10.04023172524531500, -29.91792458952493700, 26.38032382195888200 ) ) ; +#4058 = CARTESIAN_POINT ( 'NONE', ( 37.08955302715500600, -100.0000000000000300, -2.838808089234969900 ) ) ; +#4059 = CARTESIAN_POINT ( 'NONE', ( 43.18529116978685800, -8.905007241123314500, 17.79455890962243500 ) ) ; +#4060 = ORIENTED_EDGE ( 'NONE', *, *, #5172, .T. ) ; +#4061 = CARTESIAN_POINT ( 'NONE', ( 5.879744274012553600, -28.96328094123789800, 21.87142047783453700 ) ) ; +#4062 = CARTESIAN_POINT ( 'NONE', ( 36.96228106477107600, -29.37548490822371900, 24.81206872817219600 ) ) ; +#4063 = EDGE_LOOP ( 'NONE', ( #10153, #10294, #10480 ) ) ; +#4064 = ORIENTED_EDGE ( 'NONE', *, *, #6759, .F. ) ; +#4065 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -99.99999999999998600, -25.63802908547507900 ) ) ; +#4066 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10449, #1294, #11472, #5360 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001031113399951940400 ), + .UNSPECIFIED. ) ; +#4067 = CARTESIAN_POINT ( 'NONE', ( 33.86220696477094800, -30.48385424557201500, 27.00211869185975300 ) ) ; +#4068 = CARTESIAN_POINT ( 'NONE', ( 37.01480177770252300, -28.83242874897031200, 24.67646145017719300 ) ) ; +#4069 = CARTESIAN_POINT ( 'NONE', ( 0.09712465669868128300, 10.19006527892301500, 0.3593456658651226800 ) ) ; +#4070 = CARTESIAN_POINT ( 'NONE', ( 16.71012092569722200, -12.49999999999998400, -22.52116155464717900 ) ) ; +#4071 = VERTEX_POINT ( 'NONE', #3134 ) ; +#4072 = CARTESIAN_POINT ( 'NONE', ( 8.750105294582443300, -31.16274642797944900, 25.16784939193275500 ) ) ; +#4073 = VERTEX_POINT ( 'NONE', #2629 ) ; +#4074 = CARTESIAN_POINT ( 'NONE', ( 43.79721974715089100, -7.601948940085666400, -21.47554080188519900 ) ) ; +#4075 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, -8.816723538656647800, 8.183148008286263300 ) ) ; +#4076 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000700, -8.815369559463178500, -11.85782899107294200 ) ) ; +#4077 = CARTESIAN_POINT ( 'NONE', ( 36.23637424071628700, -31.77373426678729400, 25.63808206870194800 ) ) ; +#4078 = EDGE_CURVE ( 'NONE', #7792, #5839, #5776, .T. ) ; +#4079 = ORIENTED_EDGE ( 'NONE', *, *, #10998, .T. ) ; +#4080 = CARTESIAN_POINT ( 'NONE', ( 38.26836173069463600, -29.12129283159366400, 23.36572140397583300 ) ) ; +#4081 = CARTESIAN_POINT ( 'NONE', ( 7.402705771716254500, -28.61655780532807800, 22.99911610301278800 ) ) ; +#4082 = CARTESIAN_POINT ( 'NONE', ( 35.88987174122349400, -30.34587193498843000, 25.93731818479078300 ) ) ; +#4083 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.734723475976807600E-016, -1.000000000000000000 ) ) ; +#4084 = CARTESIAN_POINT ( 'NONE', ( 40.00437852116048300, -19.99908786741845600, -11.70708127431756100 ) ) ; +#4085 = ORIENTED_EDGE ( 'NONE', *, *, #6112, .T. ) ; +#4086 = CARTESIAN_POINT ( 'NONE', ( 15.92391054053097800, -100.0000000000000300, -37.70236617686631300 ) ) ; +#4087 = CARTESIAN_POINT ( 'NONE', ( 5.528682005360583900, -20.23614159466896800, -15.71609976453599700 ) ) ; +#4088 = ORIENTED_EDGE ( 'NONE', *, *, #10205, .T. ) ; +#4089 = VECTOR ( 'NONE', #10546, 999.9999999999998900 ) ; +#4090 = CARTESIAN_POINT ( 'NONE', ( 7.125601079030254900, -30.94965482727255300, 23.59179564046111500 ) ) ; +#4091 = CARTESIAN_POINT ( 'NONE', ( 44.99999999998914300, -9.188375572596276800, 12.22214433762949600 ) ) ; +#4092 = CARTESIAN_POINT ( 'NONE', ( 31.74855280359536300, -30.87380651847234200, 27.77015560782662400 ) ) ; +#4093 = CARTESIAN_POINT ( 'NONE', ( 0.4005458202112084900, -7.404010829618489000, 16.27416874786488400 ) ) ; +#4094 = CARTESIAN_POINT ( 'NONE', ( 11.72836051950315600, -30.67722847103428000, 27.24359333635719700 ) ) ; +#4095 = AXIS2_PLACEMENT_3D ( 'NONE', #4301, #11451, #5332 ) ; +#4096 = CARTESIAN_POINT ( 'NONE', ( 36.84930629797813900, -100.0000000000000100, -29.71313003999629000 ) ) ; +#4097 = CARTESIAN_POINT ( 'NONE', ( 33.52378414266725300, -13.25165111960538400, 24.42664617576270200 ) ) ; +#4098 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#4099 = ORIENTED_EDGE ( 'NONE', *, *, #9149, .T. ) ; +#4100 = CARTESIAN_POINT ( 'NONE', ( 10.55037755008145700, -12.49999999999999600, 17.70288848595167200 ) ) ; +#4101 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -102.6047226650038800, -26.09731196857810100 ) ) ; +#4102 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000000, 3.189999999999994200 ) ) ; +#4103 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -90.07596123493894400, 15.95758058754439400 ) ) ; +#4104 = CIRCLE ( 'NONE', #700, 2.500000000000000000 ) ; +#4105 = CARTESIAN_POINT ( 'NONE', ( 10.34878530666034300, -30.70583347618684300, 26.58468660963108100 ) ) ; +#4106 = CARTESIAN_POINT ( 'NONE', ( 34.44337236086746400, -12.50000000000001100, 17.67958388460127500 ) ) ; +#4107 = EDGE_LOOP ( 'NONE', ( #5868, #6350, #7020, #7511, #8622 ) ) ; +#4108 = CARTESIAN_POINT ( 'NONE', ( 1.436702034014304900, -8.514783359276442800, -22.35841343773715200 ) ) ; +#4109 = CARTESIAN_POINT ( 'NONE', ( 42.97305379311050200, -9.022190312898210600, 19.98310492241578700 ) ) ; +#4110 = CARTESIAN_POINT ( 'NONE', ( 5.666549074291725500, -30.41541846774638800, 21.73023879640692300 ) ) ; +#4111 = CARTESIAN_POINT ( 'NONE', ( 15.92391054053097800, -12.49999999999998400, -22.27375536487620500 ) ) ; +#4112 = CARTESIAN_POINT ( 'NONE', ( 37.27866456868655800, -30.26714398593514200, 25.00428615399810500 ) ) ; +#4113 = CARTESIAN_POINT ( 'NONE', ( 5.010058132171382200, -27.55641513033453500, 9.891882551940456700 ) ) ; +#4114 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #743, #663, #633, #6362, #6335, #6318, #585, #572 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( -3.134628909667520900E-005, 0.0008572174384428636800, 0.001745781165982402600, 0.003522908621061482100 ), + .UNSPECIFIED. ) ; +#4115 = EDGE_CURVE ( 'NONE', #7281, #1847, #11532, .T. ) ; +#4116 = CARTESIAN_POINT ( 'NONE', ( 33.85479008400129400, -30.92900164265211400, 26.90723706845695800 ) ) ; +#4117 = CARTESIAN_POINT ( 'NONE', ( 35.98215914750480900, -21.06167917917252900, 18.20200278042610300 ) ) ; +#4118 = CIRCLE ( 'NONE', #11159, 2.500000000000000400 ) ; +#4119 = CARTESIAN_POINT ( 'NONE', ( 0.07785841796037897000, 10.13070237256533100, 0.7097654561682699100 ) ) ; +#4120 = CARTESIAN_POINT ( 'NONE', ( 11.53000396233806900, -15.54731170847643500, -25.19175935419972800 ) ) ; +#4121 = CARTESIAN_POINT ( 'NONE', ( 8.557599196460955700, -30.44324612594193300, 25.55583771294227400 ) ) ; +#4122 = CARTESIAN_POINT ( 'NONE', ( 46.06371220991413700, -7.872575580171679900, -11.53187062879840100 ) ) ; +#4123 = CARTESIAN_POINT ( 'NONE', ( 0.5547226977199806200, -10.93384497458494100, 9.904833348118641500 ) ) ; +#4124 = CARTESIAN_POINT ( 'NONE', ( 44.45367085212390600, -10.84391445463412000, -13.85564949461392800 ) ) ; +#4125 = CARTESIAN_POINT ( 'NONE', ( 31.34047289929557700, -32.83351587922381800, 25.62623517288658100 ) ) ; +#4126 = CARTESIAN_POINT ( 'NONE', ( 38.82279726885863600, -30.22796977808217300, 23.36685116517943700 ) ) ; +#4127 = CARTESIAN_POINT ( 'NONE', ( 6.050532363161184300, -28.87042587369011700, 21.75716330061473200 ) ) ; +#4128 = TOROIDAL_SURFACE ( 'NONE', #842, 3.000000000000000000, 2.000000000000000000 ) ; +#4129 = CARTESIAN_POINT ( 'NONE', ( 35.76754051927667900, -31.12041427586659700, 25.61726190923065300 ) ) ; +#4130 = CARTESIAN_POINT ( 'NONE', ( 11.40239883950875400, -11.01227665245101200, -25.05609677739277400 ) ) ; +#4131 = CARTESIAN_POINT ( 'NONE', ( 41.05024837348649700, -17.89972021634778100, -11.53704536660965600 ) ) ; +#4132 = EDGE_CURVE ( 'NONE', #5206, #8459, #8536, .T. ) ; +#4133 = ORIENTED_EDGE ( 'NONE', *, *, #7668, .F. ) ; +#4134 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, 1.981438871123700300 ) ) ; +#4135 = CARTESIAN_POINT ( 'NONE', ( 14.79083753135674900, -100.0000000000000300, -37.21869687476576900 ) ) ; +#4136 = CARTESIAN_POINT ( 'NONE', ( 33.71951253071619400, -17.77070598371402700, -24.96243188462204200 ) ) ; +#4137 = ADVANCED_FACE ( 'NONE', ( #3075 ), #10566, .F. ) ; +#4138 = CARTESIAN_POINT ( 'NONE', ( 6.711202674960821600, -29.96419780853390300, 24.09591795742542800 ) ) ; +#4139 = CIRCLE ( 'NONE', #2821, 2.500000000000000400 ) ; +#4140 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999989300, -7.972212556542257500, 11.67381494302487800 ) ) ; +#4141 = CARTESIAN_POINT ( 'NONE', ( 31.64470337758773500, -30.79308353531168100, 27.81922737084826000 ) ) ; +#4142 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -5.000000000020533800, 16.06938735382555100 ) ) ; +#4143 = CARTESIAN_POINT ( 'NONE', ( 11.74385190485948400, -30.37478664861270500, 27.26093816868269600 ) ) ; +#4144 = CARTESIAN_POINT ( 'NONE', ( 29.97295501939900200, -16.97493302863546900, 23.77013111841700500 ) ) ; +#4145 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#4146 = CARTESIAN_POINT ( 'NONE', ( 6.704066695204052600, -28.72313302742470500, 22.40274080954736000 ) ) ; +#4147 = CARTESIAN_POINT ( 'NONE', ( 13.69896521564827900, -12.49999999999999600, 20.35494399053286300 ) ) ; +#4148 = DIRECTION ( 'NONE', ( -0.7199817086279078900, 0.0000000000000000000, 0.6939930397642604100 ) ) ; +#4149 = CARTESIAN_POINT ( 'NONE', ( 3.300269011313357900, -11.04457157569894000, 18.15606111507111800 ) ) ; +#4150 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, 19.48143887112370700 ) ) ; +#4151 = CARTESIAN_POINT ( 'NONE', ( 10.38926314529662200, -30.11326226736216000, 26.61289696561477300 ) ) ; +#4152 = CIRCLE ( 'NONE', #3854, 2.500000000000000000 ) ; +#4153 = CARTESIAN_POINT ( 'NONE', ( 30.57931111076171900, -100.0000000000000300, 5.299666842386448800 ) ) ; +#4154 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 51.02052347080197600, 33.25956466485613600 ) ) ; +#4155 = CARTESIAN_POINT ( 'NONE', ( 39.97460422034360100, -12.05030693730113200, 19.76669286279072300 ) ) ; +#4156 = CARTESIAN_POINT ( 'NONE', ( 5.358894402505148600, -29.27344296109424300, 21.92802845079346600 ) ) ; +#4157 = CARTESIAN_POINT ( 'NONE', ( 39.58530898224951500, -9.999999999999992900, 21.97096877852869700 ) ) ; +#4158 = CARTESIAN_POINT ( 'NONE', ( 36.96302890173296900, -31.11993641411269700, 24.50532817945806500 ) ) ; +#4159 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000001800, 10.00000000000000000, -23.00000000000000000 ) ) ; +#4160 = ORIENTED_EDGE ( 'NONE', *, *, #309, .T. ) ; +#4161 = EDGE_CURVE ( 'NONE', #5206, #11089, #91, .T. ) ; +#4162 = CARTESIAN_POINT ( 'NONE', ( 33.74981183542659800, -30.31647082001880000, 27.04691975952687600 ) ) ; +#4163 = CARTESIAN_POINT ( 'NONE', ( 36.68426849219212500, -26.28176303307794700, 16.59192196790049000 ) ) ; +#4164 = FACE_OUTER_BOUND ( 'NONE', #1743, .T. ) ; +#4165 = CARTESIAN_POINT ( 'NONE', ( 8.749606591594563600, -29.56453481022508400, 25.45034851142987600 ) ) ; +#4166 = CARTESIAN_POINT ( 'NONE', ( 30.53344681593253900, -7.693899955086513000, -32.19007462203596500 ) ) ; +#4167 = CARTESIAN_POINT ( 'NONE', ( 6.129878641714991700E-014, -9.188384242596267600, 12.22212290712948500 ) ) ; +#4168 = CARTESIAN_POINT ( 'NONE', ( 44.99999999998571100, -9.021928350464511600, -16.06091131203498200 ) ) ; +#4169 = CARTESIAN_POINT ( 'NONE', ( 25.67844877291032900, -31.28084508496331000, 28.74761283924393500 ) ) ; +#4170 = CARTESIAN_POINT ( 'NONE', ( 38.01729015790876100, -29.11431306113067000, 23.61008500326451200 ) ) ; +#4171 = AXIS2_PLACEMENT_3D ( 'NONE', #2758, #13029, #12078 ) ; +#4172 = FACE_OUTER_BOUND ( 'NONE', #1945, .T. ) ; +#4173 = CARTESIAN_POINT ( 'NONE', ( 35.75318401745838100, -30.06119347964947900, 25.98015284484810300 ) ) ; +#4174 = CARTESIAN_POINT ( 'NONE', ( 10.50364514177413300, -17.28032721715266000, -24.70413432876493300 ) ) ; +#4175 = CARTESIAN_POINT ( 'NONE', ( -1.905824131322175000E-018, 9.723952627011014400, 1.698875742032556200 ) ) ; +#4176 = CARTESIAN_POINT ( 'NONE', ( 14.79083753135674900, -12.49999999999998400, -21.79008606277566100 ) ) ; +#4177 = CARTESIAN_POINT ( 'NONE', ( 34.75775434585271700, -19.81240241061963700, -23.97549254682191800 ) ) ; +#4178 = CARTESIAN_POINT ( 'NONE', ( 7.246764274802884200, -31.01185065877141500, 23.62442665718815600 ) ) ; +#4179 = CARTESIAN_POINT ( 'NONE', ( 31.64558285680112000, -30.85526364678792200, 27.80730988673070000 ) ) ; +#4180 = CARTESIAN_POINT ( 'NONE', ( 38.82531918434527500, -8.115708828546772200, 25.00000000000000700 ) ) ; +#4181 = CARTESIAN_POINT ( 'NONE', ( 11.82882899929928300, -30.75935447530463700, 27.27018407404090500 ) ) ; +#4182 = ORIENTED_EDGE ( 'NONE', *, *, #7023, .F. ) ; +#4183 = ORIENTED_EDGE ( 'NONE', *, *, #9649, .F. ) ; +#4184 = CARTESIAN_POINT ( 'NONE', ( 27.27656192495092600, -18.67056167372110000, 23.47114603902628400 ) ) ; +#4185 = CARTESIAN_POINT ( 'NONE', ( 38.97077888062754900, -28.89030954307262900, 21.82181841842745800 ) ) ; +#4186 = FACE_OUTER_BOUND ( 'NONE', #10210, .T. ) ; +#4187 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4188 = CARTESIAN_POINT ( 'NONE', ( 5.020046873226328400, -22.30177161745993800, -11.13730917569813700 ) ) ; +#4189 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3619, #4720, #3082, #2771, #2686, #2246, #2028, #1900, #1803, #1243, #1390, #1723, #1600, #1065, #763, #588, #13002, #12958 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 4.336808689942017700E-019, 0.0007950620696030744100, 0.001590124139206148400, 0.002385186208809222200, 0.003180248278412296400, 0.003975310348015371000, 0.004770372417618443500, 0.005565434487221517700, 0.006360496556824591800 ), + .UNSPECIFIED. ) ; +#4190 = CARTESIAN_POINT ( 'NONE', ( 44.46023565844415500, -11.01256908412147500, 9.143063201134625100 ) ) ; +#4191 = CARTESIAN_POINT ( 'NONE', ( 38.74311286946823400, -100.0000000000000000, 17.91938285900863200 ) ) ; +#4192 = CARTESIAN_POINT ( 'NONE', ( 33.76659515037945200, -11.83838024654572700, -25.08452187517081100 ) ) ; +#4193 = CARTESIAN_POINT ( 'NONE', ( 13.72937329422759900, -30.65936817455452600, 27.95662136398580700 ) ) ; +#4194 = CARTESIAN_POINT ( 'NONE', ( 10.56404576947049100, -30.94147053566938900, 26.60387607854947900 ) ) ; +#4195 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -10.43079757070503400, -25.07596123493895500 ) ) ; +#4196 = CARTESIAN_POINT ( 'NONE', ( 40.26500489150387800, -11.35368721766897300, -23.44557386197888600 ) ) ; +#4197 = CARTESIAN_POINT ( 'NONE', ( 37.90890792004879700, -9.961447927456241300, 23.54589512836342300 ) ) ; +#4198 = ORIENTED_EDGE ( 'NONE', *, *, #1711, .F. ) ; +#4199 = CARTESIAN_POINT ( 'NONE', ( 6.090150349584750900, -30.60934352635698400, 21.75652171725449000 ) ) ; +#4200 = CARTESIAN_POINT ( 'NONE', ( 14.42068888923827800, -100.0000000000000300, -37.03852336990894400 ) ) ; +#4201 = CARTESIAN_POINT ( 'NONE', ( 36.87026039387838200, -30.05321847850425200, 25.26506041798656500 ) ) ; +#4202 = VERTEX_POINT ( 'NONE', #2125 ) ; +#4203 = CARTESIAN_POINT ( 'NONE', ( 38.92420708896032300, -26.22580756748616100, 6.815655241949637700 ) ) ; +#4204 = ADVANCED_FACE ( 'NONE', ( #5467 ), #2431, .F. ) ; +#4205 = CARTESIAN_POINT ( 'NONE', ( 33.76724461032831200, -30.74849097619384600, 27.00959265578933000 ) ) ; +#4206 = CARTESIAN_POINT ( 'NONE', ( 39.91513381877112500, -28.23679786155438300, 14.68784968662331600 ) ) ; +#4207 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4208 = CARTESIAN_POINT ( 'NONE', ( 16.49953127096480500, -20.01384545781165200, 22.81373943744575400 ) ) ; +#4209 = ORIENTED_EDGE ( 'NONE', *, *, #6742, .F. ) ; +#4210 = EDGE_LOOP ( 'NONE', ( #449, #7602, #7914, #8568 ) ) ; +#4211 = CARTESIAN_POINT ( 'NONE', ( 8.673140790902955600, -30.68041518924700400, 25.54450790942978600 ) ) ; +#4212 = CARTESIAN_POINT ( 'NONE', ( 39.58530898224948700, -10.00000000000000000, -25.49750839269784200 ) ) ; +#4213 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, -5.958823660701856500, 14.93489108473822600 ) ) ; +#4214 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999997900, -5.478674590018672900, -18.85175486693508500 ) ) ; +#4215 = CARTESIAN_POINT ( 'NONE', ( 6.712006322907203800, -7.463541018600208700, -24.99999999999999600 ) ) ; +#4216 = EDGE_LOOP ( 'NONE', ( #2456, #5155 ) ) ; +#4217 = CARTESIAN_POINT ( 'NONE', ( 38.57166642166529200, -29.99235499451844000, 23.77568189791291100 ) ) ; +#4218 = VERTEX_POINT ( 'NONE', #10691 ) ; +#4219 = CARTESIAN_POINT ( 'NONE', ( 35.75318618690316400, -30.87615517150062400, 25.83646663519851200 ) ) ; +#4220 = CARTESIAN_POINT ( 'NONE', ( 19.69813696784036900, -97.51634637671227800, 22.06726462330450300 ) ) ; +#4221 = VERTEX_POINT ( 'NONE', #1992 ) ; +#4222 = CARTESIAN_POINT ( 'NONE', ( 27.28700691893632100, -95.07596123493894400, 17.80645102013922100 ) ) ; +#4223 = CARTESIAN_POINT ( 'NONE', ( 6.778470923497399000, -30.25305643395021000, 24.15739322470258800 ) ) ; +#4224 = CARTESIAN_POINT ( 'NONE', ( 44.37982881490136600, -10.53030211876266600, 11.79278137666825900 ) ) ; +#4225 = CARTESIAN_POINT ( 'NONE', ( 31.43975935713273600, -30.79701419505373400, 27.88206182980991700 ) ) ; +#4226 = CARTESIAN_POINT ( 'NONE', ( 42.82223639389845000, -9.213075428455924900, -21.60101396547546300 ) ) ; +#4227 = CARTESIAN_POINT ( 'NONE', ( 11.84037662749462600, -30.42309160814528500, 27.30219532072074200 ) ) ; +#4228 = AXIS2_PLACEMENT_3D ( 'NONE', #6414, #370, #7471 ) ; +#4229 = CARTESIAN_POINT ( 'NONE', ( 39.98437607935393600, -29.83908441847431400, 21.65520368595863200 ) ) ; +#4230 = ORIENTED_EDGE ( 'NONE', *, *, #9482, .F. ) ; +#4231 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#4232 = CARTESIAN_POINT ( 'NONE', ( 14.41883819619317300, -100.0000000000000300, 5.321834943021097600 ) ) ; +#4233 = ORIENTED_EDGE ( 'NONE', *, *, #8381, .F. ) ; +#4234 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, -16.29999999999998300 ) ) ; +#4235 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12775, #4687, #8831, #2701, #9834, #3707, #10845, #4734 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002288471322929298600, 0.003432706984393953300, 0.004576942645858607600 ), + .UNSPECIFIED. ) ; +#4236 = EDGE_CURVE ( 'NONE', #4246, #8590, #7884, .T. ) ; +#4237 = CARTESIAN_POINT ( 'NONE', ( 10.55108740887230200, -30.39334221983656200, 26.72622979964562600 ) ) ; +#4238 = CARTESIAN_POINT ( 'NONE', ( 29.54941352505464600, -30.77347774677275200, 28.36758194924233900 ) ) ; +#4239 = CARTESIAN_POINT ( 'NONE', ( 0.8450799996949972500, -8.389711229384587900, -19.69998625431978600 ) ) ; +#4240 = CARTESIAN_POINT ( 'NONE', ( 38.99460338171287800, -9.904824570262631400, 27.37672996471530200 ) ) ; +#4241 = CARTESIAN_POINT ( 'NONE', ( 5.072477411581227000, -29.64223767916635000, 21.91613130032686400 ) ) ; +#4242 = CARTESIAN_POINT ( 'NONE', ( 45.00000000001061600, -9.472594609124513500, 11.40327843003579900 ) ) ; +#4243 = CARTESIAN_POINT ( 'NONE', ( 37.56672083906811100, -9.999999999999996400, 23.86571796223842400 ) ) ; +#4244 = AXIS2_PLACEMENT_3D ( 'NONE', #613, #10768, #6690 ) ; +#4245 = CARTESIAN_POINT ( 'NONE', ( 36.73930335923474600, -30.98308722490518400, 24.94263203123215400 ) ) ; +#4246 = VERTEX_POINT ( 'NONE', #2148 ) ; +#4247 = CARTESIAN_POINT ( 'NONE', ( 17.14070171165608900, -100.0000000000000100, 6.300051934314571300 ) ) ; +#4248 = DATE_AND_TIME ( #6990, #9689 ) ; +#4249 = CARTESIAN_POINT ( 'NONE', ( 29.81753698954036800, -19.17728770995928400, 22.58347473791668100 ) ) ; +#4250 = VERTEX_POINT ( 'NONE', #1889 ) ; +#4251 = CARTESIAN_POINT ( 'NONE', ( 33.54908267001849300, -30.29999235194907900, 27.13265463201707600 ) ) ; +#4252 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000002100, -27.09143239524034300, 6.754920151478381200 ) ) ; +#4253 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -27.23413567771367000, 29.46115689082877500 ) ) ; +#4254 = CARTESIAN_POINT ( 'NONE', ( 14.42068888923827800, -12.49999999999998400, -21.60991255791884000 ) ) ; +#4255 = CARTESIAN_POINT ( 'NONE', ( 12.13018316416673600, -30.72118750371156200, 27.40033412799896000 ) ) ; +#4256 = CARTESIAN_POINT ( 'NONE', ( 8.766179382172799400, -29.77356529260302800, 25.57561687665689500 ) ) ; +#4257 = CARTESIAN_POINT ( 'NONE', ( 39.47131799463943500, -20.23614159466897900, -15.71609976453595600 ) ) ; +#4258 = CARTESIAN_POINT ( 'NONE', ( 41.72327898825777500, -9.693645654353265000, 22.49999999999900900 ) ) ; +#4259 = CARTESIAN_POINT ( 'NONE', ( 4.253151103460510300, -9.040472185300107100, -24.67181497463785400 ) ) ; +#4260 = EDGE_CURVE ( 'NONE', #5963, #5041, #2751, .T. ) ; +#4261 = CARTESIAN_POINT ( 'NONE', ( 38.03887497337486000, -30.93850195326559000, 23.30151702021436900 ) ) ; +#4262 = ORIENTED_EDGE ( 'NONE', *, *, #12839, .T. ) ; +#4263 = CARTESIAN_POINT ( 'NONE', ( 35.50614254181845600, -29.82626036753802300, 26.04200169784355600 ) ) ; +#4264 = CARTESIAN_POINT ( 'NONE', ( 7.302305667509690700, -97.43723205496536400, 18.98004339479655700 ) ) ; +#4265 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 1, + ( #12884, #808 ), + .UNSPECIFIED., .F., .F., + ( 2, 2 ), + ( 0.2100373172900666700, 0.8944261668332067500 ), + .UNSPECIFIED. ) ; +#4266 = CARTESIAN_POINT ( 'NONE', ( 32.68529199994053900, -94.71799171676607900, 17.48965911177147000 ) ) ; +#4267 = CARTESIAN_POINT ( 'NONE', ( 13.69575091714328100, -100.0000000000000300, -36.63958563575383900 ) ) ; +#4268 = CARTESIAN_POINT ( 'NONE', ( 28.57617956277400100, -31.95460249790660300, 20.70678011832630400 ) ) ; +#4269 = ADVANCED_FACE ( 'NONE', ( #10873 ), #6578, .F. ) ; +#4270 = CARTESIAN_POINT ( 'NONE', ( 7.227238398741564900, -29.20122624701388500, 23.96028594141633800 ) ) ; +#4271 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999989300, -8.265494380433875000, 10.95786100305832600 ) ) ; +#4272 = CARTESIAN_POINT ( 'NONE', ( 31.43953283755560000, -30.82802242846576800, 27.87670609939895200 ) ) ; +#4273 = CARTESIAN_POINT ( 'NONE', ( 44.15492000030460700, -7.781481582011423400, -21.43596316075119600 ) ) ; +#4274 = CARTESIAN_POINT ( 'NONE', ( 12.13306286085412600, -30.87147548418020900, 27.36631122338473400 ) ) ; +#4275 = AXIS2_PLACEMENT_3D ( 'NONE', #11355, #5238, #12336 ) ; +#4276 = CARTESIAN_POINT ( 'NONE', ( 44.85752418992354500, -6.210297150709291000, -20.29420667236263400 ) ) ; +#4277 = CARTESIAN_POINT ( 'NONE', ( 38.93967273751815100, -30.56624305985456800, 21.52628734371928200 ) ) ; +#4278 = ORIENTED_EDGE ( 'NONE', *, *, #3974, .F. ) ; +#4279 = CARTESIAN_POINT ( 'NONE', ( 0.5278685303132660800, -11.05573706062646100, 8.005331014626776200 ) ) ; +#4280 = CARTESIAN_POINT ( 'NONE', ( 5.005921756035918200, -19.97928244718245600, -10.99229152817992300 ) ) ; +#4281 = CARTESIAN_POINT ( 'NONE', ( 20.06133793030467800, -30.66176281334874800, 28.85677374700786400 ) ) ; +#4282 = CARTESIAN_POINT ( 'NONE', ( 43.56097490697126100, -8.512566085954331300, 18.86187875491759100 ) ) ; +#4283 = CARTESIAN_POINT ( 'NONE', ( 0.01775042107868085200, -5.486525469354000400, -19.73866771793942800 ) ) ; +#4284 = PLANE ( 'NONE', #6681 ) ; +#4285 = FACE_OUTER_BOUND ( 'NONE', #12827, .T. ) ; +#4286 = CARTESIAN_POINT ( 'NONE', ( 6.121378749753741700, -28.90437856940996800, 22.05765950834704400 ) ) ; +#4287 = CARTESIAN_POINT ( 'NONE', ( 44.39937844791835200, -10.65532133042614400, 11.32614735668999600 ) ) ; +#4288 = CARTESIAN_POINT ( 'NONE', ( 13.69575091714328100, -12.49999999999998400, -21.21097482376373100 ) ) ; +#4289 = CARTESIAN_POINT ( 'NONE', ( 36.57206555283643500, -29.69311813429496300, 25.31297880818978300 ) ) ; +#4290 = CARTESIAN_POINT ( 'NONE', ( 9.146494699878928700, -100.0000000000000100, 0.2282800123429885900 ) ) ; +#4291 = CARTESIAN_POINT ( 'NONE', ( 33.43278277107833700, -19.28196204206652800, 20.72851409989927200 ) ) ; +#4292 = CARTESIAN_POINT ( 'NONE', ( 33.57016502637765900, -30.66581079216988600, 27.11624627137153700 ) ) ; +#4293 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4294 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -31.29892962639879200, 28.74442404665511900 ) ) ; +#4295 = CARTESIAN_POINT ( 'NONE', ( 13.33977579956018800, -100.0000000000000300, -36.41976309893834700 ) ) ; +#4296 = CARTESIAN_POINT ( 'NONE', ( 12.13861251216441600, -30.47391912173820600, 27.42183686240669300 ) ) ; +#4297 = CARTESIAN_POINT ( 'NONE', ( 8.936846171979041700, -31.01220140446826100, 25.49216847219186400 ) ) ; +#4298 = CARTESIAN_POINT ( 'NONE', ( 24.85077160798173100, -20.87025052225378000, -26.95197311310864700 ) ) ; +#4299 = CARTESIAN_POINT ( 'NONE', ( -2.602085213965210600E-015, -8.819417414421749900, -11.66808570093797400 ) ) ; +#4300 = CARTESIAN_POINT ( 'NONE', ( 36.10672859753822900, -9.317511611577979000, 25.00000000000000000 ) ) ; +#4301 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000900, 17.50000000000000400 ) ) ; +#4302 = ORIENTED_EDGE ( 'NONE', *, *, #2885, .F. ) ; +#4303 = CARTESIAN_POINT ( 'NONE', ( 38.36070632782275400, -29.66904672254680300, 23.87141505230784600 ) ) ; +#4304 = CARTESIAN_POINT ( 'NONE', ( 10.90961423130795400, -17.51941844504147400, -24.79243512156836400 ) ) ; +#4305 = FACE_OUTER_BOUND ( 'NONE', #5499, .T. ) ; +#4306 = CARTESIAN_POINT ( 'NONE', ( 10.31322700029392600, -18.80672049622987500, -24.27582422601525600 ) ) ; +#4307 = CARTESIAN_POINT ( 'NONE', ( 35.61239803362852300, -30.61646420240548100, 26.06814555418567600 ) ) ; +#4308 = CARTESIAN_POINT ( 'NONE', ( 15.48977058470407200, -33.06024378525529500, 26.06186080495300300 ) ) ; +#4309 = CARTESIAN_POINT ( 'NONE', ( 35.68074599945856600, -95.07596123493894400, 14.12565726166373800 ) ) ; +#4310 = CARTESIAN_POINT ( 'NONE', ( 26.18234280836301400, -9.999999999999996400, 28.32632874172206500 ) ) ; +#4311 = CARTESIAN_POINT ( 'NONE', ( 30.79245940135382000, -38.82060746691854500, 18.73907739207605200 ) ) ; +#4312 = CARTESIAN_POINT ( 'NONE', ( 6.976409074073631100, -30.57283734920841000, 24.12222071315295200 ) ) ; +#4313 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000267900, -9.596775359586647600, 10.98184409063920700 ) ) ; +#4314 = CARTESIAN_POINT ( 'NONE', ( 31.33715120641856400, -30.80737506316650000, 27.91117015694393200 ) ) ; +#4315 = CARTESIAN_POINT ( 'NONE', ( 17.39367308693684000, -33.24550673870099600, 26.39773334638899600 ) ) ; +#4316 = EDGE_CURVE ( 'NONE', #5510, #12755, #7569, .T. ) ; +#4317 = CIRCLE ( 'NONE', #9609, 7.499999999999995600 ) ; +#4318 = CARTESIAN_POINT ( 'NONE', ( 39.92350158312974200, -29.50956310431888200, 21.77666617521330700 ) ) ; +#4319 = CARTESIAN_POINT ( 'NONE', ( 3.967568645283236200, -17.90469919325605000, -10.80899820510510200 ) ) ; +#4320 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -93.17319105032913700, 22.83432234620768100 ) ) ; +#4321 = CARTESIAN_POINT ( 'NONE', ( 7.974808194957759600, -94.72210163403924800, 15.44587895064602500 ) ) ; +#4322 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -99.99999999999998600, 15.71686712626637400 ) ) ; +#4323 = CARTESIAN_POINT ( 'NONE', ( 5.193340959329970200, -30.01553343202695600, 22.00473742701358000 ) ) ; +#4324 = FACE_OUTER_BOUND ( 'NONE', #13062, .T. ) ; +#4325 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000700, -8.393912647291834600, 10.58994947948361100 ) ) ; +#4326 = CARTESIAN_POINT ( 'NONE', ( 13.33977579956018800, -12.49999999999998400, -20.99115228694823500 ) ) ; +#4327 = CARTESIAN_POINT ( 'NONE', ( 36.68834866506384200, -30.65406123602469500, 25.29107857181022500 ) ) ; +#4328 = CARTESIAN_POINT ( 'NONE', ( 39.99999999998853200, -94.37877999299159600, 14.93505082452586700 ) ) ; +#4329 = CARTESIAN_POINT ( 'NONE', ( 36.01880552384960100, -19.41086498666297200, 18.44465827492473800 ) ) ; +#4330 = ADVANCED_FACE ( 'NONE', ( #9928 ), #4484, .T. ) ; +#4331 = EDGE_CURVE ( 'NONE', #11764, #10062, #4189, .T. ) ; +#4332 = CARTESIAN_POINT ( 'NONE', ( 33.54914071768843100, -31.04541667273793200, 27.00135229131969100 ) ) ; +#4333 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -97.50836417161596600, 10.00776309439367200 ) ) ; +#4334 = ORIENTED_EDGE ( 'NONE', *, *, #7085, .F. ) ; +#4335 = ORIENTED_EDGE ( 'NONE', *, *, #11157, .F. ) ; +#4336 = CARTESIAN_POINT ( 'NONE', ( 27.97130695174265800, -31.29892962639879200, 28.59564812038164700 ) ) ; +#4337 = CARTESIAN_POINT ( 'NONE', ( 12.31832343826441600, -100.0000000000000300, -35.71643108392895300 ) ) ; +#4338 = CARTESIAN_POINT ( 'NONE', ( 12.33309262958984200, -30.78857905512730800, 27.46553639791832100 ) ) ; +#4339 = CARTESIAN_POINT ( 'NONE', ( 8.852631628776332900, -30.17718932839993700, 25.76039503665468500 ) ) ; +#4340 = VECTOR ( 'NONE', #12039, 1000.000000000000000 ) ; +#4341 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4342 = CARTESIAN_POINT ( 'NONE', ( 34.29204212111607600, -11.64015160021820500, 25.00000000000000400 ) ) ; +#4343 = DIRECTION ( 'NONE', ( 1.224646799147353200E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#4344 = CARTESIAN_POINT ( 'NONE', ( 38.21468954068328800, -30.72247289328766200, 23.59001526083658400 ) ) ; +#4345 = CARTESIAN_POINT ( 'NONE', ( 10.50363404528913200, -17.28346525428729000, -24.70364593935487500 ) ) ; +#4346 = ORIENTED_EDGE ( 'NONE', *, *, #227, .F. ) ; +#4347 = CARTESIAN_POINT ( 'NONE', ( 35.40297712642915000, -29.79379503783016900, 26.08793964722704900 ) ) ; +#4348 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4349 = CIRCLE ( 'NONE', #11211, 2.000000000000001800 ) ; +#4350 = CARTESIAN_POINT ( 'NONE', ( 27.97130695174265800, -30.65936817474671700, 28.70842006012897600 ) ) ; +#4351 = CARTESIAN_POINT ( 'NONE', ( 12.31832343826441600, -12.49999999999998400, -20.28782027193884500 ) ) ; +#4352 = CARTESIAN_POINT ( 'NONE', ( 37.09880736946900000, -31.56038146495003400, 24.13144155332081200 ) ) ; +#4353 = CARTESIAN_POINT ( 'NONE', ( 7.101229587042633200, -29.52684861097278800, 24.19701726214817900 ) ) ; +#4354 = CARTESIAN_POINT ( 'NONE', ( 39.99375702758862200, -22.32188603197045800, -11.50042087925670300 ) ) ; +#4355 = CARTESIAN_POINT ( 'NONE', ( 31.33674309299900400, -30.82257088942191100, 27.90860959426612800 ) ) ; +#4356 = CARTESIAN_POINT ( 'NONE', ( 10.82537926642458400, -30.35318150787031800, 26.98033384959691700 ) ) ; +#4357 = CARTESIAN_POINT ( 'NONE', ( 39.01159066873160000, -30.54745919854885700, 21.59230638768524500 ) ) ; +#4358 = EDGE_LOOP ( 'NONE', ( #5975, #8302, #11298, #10596 ) ) ; +#4359 = CARTESIAN_POINT ( 'NONE', ( 34.88576150260724500, -13.36407974372234400, -25.00000000000005000 ) ) ; +#4360 = CARTESIAN_POINT ( 'NONE', ( 5.013262823694404300, -22.30567777547855700, -11.28212199317005600 ) ) ; +#4361 = ORIENTED_EDGE ( 'NONE', *, *, #9324, .F. ) ; +#4362 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#4363 = CARTESIAN_POINT ( 'NONE', ( 15.22082174769276400, -97.50626985829296700, 21.67499666579268300 ) ) ; +#4364 = CARTESIAN_POINT ( 'NONE', ( 9.124150107193331700, -100.0000000000000100, -31.96792739358975100 ) ) ; +#4365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4366 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -97.04531648070948800, 16.23785755017196300 ) ) ; +#4367 = ORIENTED_EDGE ( 'NONE', *, *, #970, .T. ) ; +#4368 = CARTESIAN_POINT ( 'NONE', ( 6.092746640251963400, -28.95659936838191600, 22.21279314313861900 ) ) ; +#4369 = CARTESIAN_POINT ( 'NONE', ( 44.43202668666995000, -10.85662865502951400, 10.38355417012431300 ) ) ; +#4370 = CARTESIAN_POINT ( 'NONE', ( 11.69149334269538300, -100.0000000000000300, -35.18610464165197300 ) ) ; +#4371 = CARTESIAN_POINT ( 'NONE', ( 36.25007252790928900, -29.56454596806995000, 25.45032705547240000 ) ) ; +#4372 = EDGE_LOOP ( 'NONE', ( #10167, #7752, #4335, #5337, #9819 ) ) ; +#4373 = ORIENTED_EDGE ( 'NONE', *, *, #7368, .F. ) ; +#4374 = CARTESIAN_POINT ( 'NONE', ( 38.09137783404445800, -19.57597440630397400, 15.51951475692632500 ) ) ; +#4375 = CARTESIAN_POINT ( 'NONE', ( 33.46884145560768100, -30.57298674621510800, 27.17160552248639500 ) ) ; +#4376 = ORIENTED_EDGE ( 'NONE', *, *, #12575, .F. ) ; +#4377 = CARTESIAN_POINT ( 'NONE', ( 27.94471560909402200, -19.98350487221994200, 22.95453068650750300 ) ) ; +#4378 = CARTESIAN_POINT ( 'NONE', ( 30.05362854606306700, -31.29892962639879200, 28.17288626453056800 ) ) ; +#4379 = CARTESIAN_POINT ( 'NONE', ( 11.69149334269538300, -12.49999999999998400, -19.75749382966186100 ) ) ; +#4380 = CARTESIAN_POINT ( 'NONE', ( 12.33664293060951100, -30.55916138788261100, 27.49499828345480200 ) ) ; +#4381 = ORIENTED_EDGE ( 'NONE', *, *, #7771, .T. ) ; +#4382 = CARTESIAN_POINT ( 'NONE', ( 9.080334722918628600, -31.16763399304943900, 25.44694952553307800 ) ) ; +#4383 = CARTESIAN_POINT ( 'NONE', ( 10.54158325171097300, -95.07596123493894400, 6.647750091011663400 ) ) ; +#4384 = CARTESIAN_POINT ( 'NONE', ( 2.465190328815661500E-030, -2.500000000000016400, 25.00105000000004200 ) ) ; +#4385 = CARTESIAN_POINT ( 'NONE', ( 32.09863200989554600, -10.43079757070501200, -25.07596123493895100 ) ) ; +#4386 = CARTESIAN_POINT ( 'NONE', ( 20.11130174692078400, -25.52353201642540600, 22.26278246961262800 ) ) ; +#4387 = ORIENTED_EDGE ( 'NONE', *, *, #11929, .F. ) ; +#4388 = AXIS2_PLACEMENT_3D ( 'NONE', #12832, #6833, #749 ) ; +#4389 = CARTESIAN_POINT ( 'NONE', ( 37.93833934829672900, -29.30433339583268900, 23.93350214228169600 ) ) ; +#4390 = CARTESIAN_POINT ( 'NONE', ( 35.52171652543916700, -30.45373553490119500, 26.15906555754667200 ) ) ; +#4391 = CARTESIAN_POINT ( 'NONE', ( 32.61676881213733700, -95.07596123493895800, 15.53794153439857500 ) ) ; +#4392 = ORIENTED_EDGE ( 'NONE', *, *, #8898, .T. ) ; +#4393 = ORIENTED_EDGE ( 'NONE', *, *, #3234, .T. ) ; +#4394 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122093500, 0.1736481776669240000 ) ) ; +#4395 = CARTESIAN_POINT ( 'NONE', ( 30.05362854606306700, -30.65936817474671700, 28.28565820427789700 ) ) ; +#4396 = CARTESIAN_POINT ( 'NONE', ( 10.83060668048037000, -100.0000000000000300, -34.30055536053079400 ) ) ; +#4397 = CARTESIAN_POINT ( 'NONE', ( 35.34253577179767800, -31.32681011593453800, 17.15043672228325600 ) ) ; +#4398 = ADVANCED_FACE ( 'NONE', ( #12577 ), #12279, .F. ) ; +#4399 = VERTEX_POINT ( 'NONE', #12686 ) ; +#4400 = CARTESIAN_POINT ( 'NONE', ( 7.239764893249787100, -30.91540659250797800, 23.86710401542476800 ) ) ; +#4401 = CARTESIAN_POINT ( 'NONE', ( 39.96552658361603200, -20.00257545941216000, -10.42870827499374700 ) ) ; +#4402 = CARTESIAN_POINT ( 'NONE', ( 31.33717125794674300, -30.83582452899812800, 27.90614790810823500 ) ) ; +#4403 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #9771, #2637, #10789 ), + ( #4668, #11800, #5716 ), + ( #12763, #6751, #677 ), + ( #7796, #1679, #8817 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.01585894569432141200, 0.01601238227670036300 ), + ( 0.1646862906895055800, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 0.9208886789337780200, 0.7598120622700282900, 1.000000000000000000), + ( 0.9208929644560626100, 0.7598250734389202500, 1.000000000000000000), + ( 0.9208952332782112100, 0.7598319617540892900, 1.000000000000000000), + ( 0.9208954809571431300, 0.7598327137260076900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4404 = CARTESIAN_POINT ( 'NONE', ( 5.910935698529119300, -30.83722815353899400, 23.83830769737046800 ) ) ; +#4405 = CARTESIAN_POINT ( 'NONE', ( 39.43927163797556500, -29.14550163337961300, 21.95366769225281400 ) ) ; +#4406 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 9.500000000000000000, 19.48143887112370700 ) ) ; +#4407 = CARTESIAN_POINT ( 'NONE', ( 14.41883819619317300, -12.49999999999999600, 20.75044575501120600 ) ) ; +#4408 = ORIENTED_EDGE ( 'NONE', *, *, #6579, .F. ) ; +#4409 = CARTESIAN_POINT ( 'NONE', ( 20.01939907316886600, -33.18018381368932500, 28.41270817586470400 ) ) ; +#4410 = CARTESIAN_POINT ( 'NONE', ( 11.26700576844259100, -94.73433125966470000, 17.05622531304660700 ) ) ; +#4411 = EDGE_CURVE ( 'NONE', #10533, #10590, #1846, .T. ) ; +#4412 = ORIENTED_EDGE ( 'NONE', *, *, #5610, .F. ) ; +#4413 = CIRCLE ( 'NONE', #9728, 2.500000000000000900 ) ; +#4414 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4415 = CARTESIAN_POINT ( 'NONE', ( 30.66730879351693800, -31.29892962639879200, 28.02067483814850500 ) ) ; +#4416 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, 10.00000000000000000, -24.99999999999999600 ) ) ; +#4417 = CARTESIAN_POINT ( 'NONE', ( 13.67000963748504600, -15.72571090366054700, 23.99040268394803400 ) ) ; +#4418 = CARTESIAN_POINT ( 'NONE', ( 5.694678772381471400, -30.42568008820672500, 22.04865067876530900 ) ) ; +#4419 = CARTESIAN_POINT ( 'NONE', ( 39.92877610601742300, -19.91549111130810700, 9.502772670591396000 ) ) ; +#4420 = CARTESIAN_POINT ( 'NONE', ( 36.46096522641177300, -9.999999999999992900, 24.70702785189977400 ) ) ; +#4421 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #4881, #1163, ( #3724 ) ) ; +#4422 = CARTESIAN_POINT ( 'NONE', ( 39.47589767230800800, -19.77080439247356500, 12.06782646041271800 ) ) ; +#4423 = CARTESIAN_POINT ( 'NONE', ( 33.45909365802801700, -30.95923163393434800, 27.08113593336976900 ) ) ; +#4424 = CARTESIAN_POINT ( 'NONE', ( 30.66730879351693800, -30.65936817474671700, 28.13344677789583400 ) ) ; +#4425 = CARTESIAN_POINT ( 'NONE', ( 34.10314454131706400, -9.999999999999996400, 26.14205243216052200 ) ) ; +#4426 = EDGE_LOOP ( 'NONE', ( #973, #1591, #2844, #3933, #1601 ) ) ; +#4427 = CARTESIAN_POINT ( 'NONE', ( 12.74027948693331100, -30.86834765143073900, 27.59762364634084300 ) ) ; +#4428 = CARTESIAN_POINT ( 'NONE', ( 8.922344737603165000, -30.41752798424284500, 25.80984749001748900 ) ) ; +#4429 = CARTESIAN_POINT ( 'NONE', ( 31.43306843342221800, -30.83156845459759800, 27.89948320507275500 ) ) ; +#4430 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4431 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11210, #9141, #6129, #76, #7186, #1087, #8212, #2096, #9228, #3101, #10237, #4113, #11257, #5136, #12243, #6178, #123, #7231, #1136, #8262 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.01673341795362210900, 0.01860504695634115200, 0.02047667595906019200, 0.02234830496177923600, 0.02421993396449827900, 0.02796319196993636600, 0.02983482097265540900, 0.03077063547401493300, 0.03123854272469469400, 0.03170644997537445900 ), + .UNSPECIFIED. ) ; +#4432 = CARTESIAN_POINT ( 'NONE', ( 38.27688027918178900, -30.36360507234144600, 24.01648699779355300 ) ) ; +#4433 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Handle', ( #9673, #8811 ), #5368 ) ; +#4434 = CARTESIAN_POINT ( 'NONE', ( 8.377118635001039600, -9.294733415770940300, 25.01889372869944900 ) ) ; +#4435 = FACE_OUTER_BOUND ( 'NONE', #10898, .T. ) ; +#4436 = CARTESIAN_POINT ( 'NONE', ( 35.40862502402689000, -31.14657627670137800, 25.85833105963551400 ) ) ; +#4437 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -29.69615506024419500, 21.52703644666152300 ) ) ; +#4438 = PLANE ( 'NONE', #11165 ) ; +#4439 = CARTESIAN_POINT ( 'NONE', ( 0.02838215973449100000, 9.894538436513098400, 1.388060368969690900 ) ) ; +#4440 = CARTESIAN_POINT ( 'NONE', ( 10.83060668048037000, -12.49999999999998400, -18.87194454854068600 ) ) ; +#4441 = CARTESIAN_POINT ( 'NONE', ( 38.02381492962335600, -34.50405460810615200, 13.02045795559556800 ) ) ; +#4442 = CARTESIAN_POINT ( 'NONE', ( 6.923729736697364200, -29.96525356174933200, 24.31401163590775400 ) ) ; +#4443 = CARTESIAN_POINT ( 'NONE', ( 40.44627231921673200, -18.85526280423652800, -6.499914284893795200 ) ) ; +#4444 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342982300, 27.93782961424065500 ) ) ; +#4445 = CARTESIAN_POINT ( 'NONE', ( 39.43935016592526900, -30.35923351292480600, 21.73814994317355700 ) ) ; +#4446 = FACE_OUTER_BOUND ( 'NONE', #8401, .T. ) ; +#4447 = CARTESIAN_POINT ( 'NONE', ( 4.999719321213077300, -19.97806920366070200, -11.18084691817357000 ) ) ; +#4448 = EDGE_LOOP ( 'NONE', ( #10088, #10128 ) ) ; +#4449 = CARTESIAN_POINT ( 'NONE', ( 44.92214158203961500, 10.13070237256533100, -18.20976545616826300 ) ) ; +#4450 = CARTESIAN_POINT ( 'NONE', ( 7.824950306638916300, -93.12693478934333800, 19.98089178745670200 ) ) ; +#4451 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -7.274803310488114700, 13.03552885644123200 ) ) ; +#4452 = FACE_OUTER_BOUND ( 'NONE', #6295, .T. ) ; +#4453 = CARTESIAN_POINT ( 'NONE', ( 31.27023029672661300, -30.65936817474671700, 27.95672663490804100 ) ) ; +#4454 = CARTESIAN_POINT ( 'NONE', ( 35.80746247571008900, -17.47231029644464000, -24.36266422609173800 ) ) ; +#4455 = CARTESIAN_POINT ( 'NONE', ( 16.47616817279545400, -18.02424706970208100, 23.58510874174074000 ) ) ; +#4456 = CARTESIAN_POINT ( 'NONE', ( 5.694621641092178200, -29.18859482626753300, 22.26410362082674200 ) ) ; +#4457 = CARTESIAN_POINT ( 'NONE', ( 39.92953140814138600, -19.91593858948409600, 9.494844727871607000 ) ) ; +#4458 = CARTESIAN_POINT ( 'NONE', ( 10.87256934136064100, -31.08314871963497700, 26.69153632006887700 ) ) ; +#4459 = EDGE_CURVE ( 'NONE', #5024, #5245, #4811, .T. ) ; +#4460 = CARTESIAN_POINT ( 'NONE', ( 33.26210605627397900, -30.45162976923153400, 27.26126172415896000 ) ) ; +#4461 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -27.95660743987702900, 7.441782612158422500 ) ) ; +#4462 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#4463 = VECTOR ( 'NONE', #1485, 1000.000000000000000 ) ; +#4464 = CARTESIAN_POINT ( 'NONE', ( 31.27023029672661300, -31.29892962639879200, 27.84395469516071100 ) ) ; +#4465 = CARTESIAN_POINT ( 'NONE', ( 10.55662763913254500, -100.0000000000000300, -33.98982960013366000 ) ) ; +#4466 = CARTESIAN_POINT ( 'NONE', ( 12.74009028469100700, -30.70858870315161600, 27.62776880468693400 ) ) ; +#4467 = CARTESIAN_POINT ( 'NONE', ( 9.080741966047789000, -29.65290900860628300, 25.71344911226854900 ) ) ; +#4468 = CARTESIAN_POINT ( 'NONE', ( 34.23629136916074600, -12.34547223009419300, 24.58643465046051100 ) ) ; +#4469 = CARTESIAN_POINT ( 'NONE', ( 36.11397669368685100, -29.14339071342283600, 26.16675705283886400 ) ) ; +#4470 = CARTESIAN_POINT ( 'NONE', ( 35.32761426621512900, -10.11145505968754900, 24.98034746584061600 ) ) ; +#4471 = CARTESIAN_POINT ( 'NONE', ( 37.75407910735767600, -29.17845286430363000, 23.94882201063993700 ) ) ; +#4472 = LINE ( 'NONE', #7537, #6900 ) ; +#4473 = CARTESIAN_POINT ( 'NONE', ( 35.21785773617208500, -30.27631881970244300, 26.32601659780313200 ) ) ; +#4474 = CARTESIAN_POINT ( 'NONE', ( 44.09157152587820900, -8.452784834690840300, 16.38149653183795700 ) ) ; +#4475 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000900, 17.50000000000000400 ) ) ; +#4476 = CARTESIAN_POINT ( 'NONE', ( 10.55662763913254500, -12.49999999999998400, -18.56121878814354900 ) ) ; +#4477 = CARTESIAN_POINT ( 'NONE', ( 39.94503467659485100, -28.44941163723230200, 13.30858559229747100 ) ) ; +#4478 = CARTESIAN_POINT ( 'NONE', ( 7.486540808182430100, -31.05313232826981500, 23.91327285478015000 ) ) ; +#4479 = CARTESIAN_POINT ( 'NONE', ( 20.18719383516403500, -30.65917406624153000, 28.85723021296909600 ) ) ; +#4480 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983400, 27.93782961424065500 ) ) ; +#4481 = CARTESIAN_POINT ( 'NONE', ( 24.91525251969291000, -33.18150031828789500, 28.41247604058451500 ) ) ; +#4482 = EDGE_CURVE ( 'NONE', #2266, #12755, #1806, .T. ) ; +#4483 = CARTESIAN_POINT ( 'NONE', ( 38.96334368032697200, -28.93782356255567800, 22.05076478885302600 ) ) ; +#4484 = CYLINDRICAL_SURFACE ( 'NONE', #1837, 2.499999999999998700 ) ; +#4485 = CARTESIAN_POINT ( 'NONE', ( 0.8450799996949932600, -7.781481582010830100, -21.43596316075076300 ) ) ; +#4486 = CARTESIAN_POINT ( 'NONE', ( 3.959085789838933300, -17.89776906747584200, -11.04626540517351800 ) ) ; +#4487 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -7.803381376535709200, 12.03048584365759400 ) ) ; +#4488 = CARTESIAN_POINT ( 'NONE', ( 35.20373276632022900, -12.49999999999999800, -17.57495603219277300 ) ) ; +#4489 = CARTESIAN_POINT ( 'NONE', ( 35.44022065943101300, -17.86592105975108400, -24.40639254249603200 ) ) ; +#4490 = CARTESIAN_POINT ( 'NONE', ( 18.95381706550749000, -19.05687432131810500, 23.40302869626601600 ) ) ; +#4491 = ORIENTED_EDGE ( 'NONE', *, *, #11356, .F. ) ; +#4492 = CARTESIAN_POINT ( 'NONE', ( 6.275743611664147200, -30.71748455964416300, 22.31297900251555400 ) ) ; +#4493 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999734300, -9.797210183033081800, 10.13284811034179200 ) ) ; +#4494 = EDGE_LOOP ( 'NONE', ( #1815, #1828, #1986, #2021, #2165, #2189, #2298 ) ) ; +#4495 = CARTESIAN_POINT ( 'NONE', ( 10.83711634309026000, -30.59445561235394700, 26.85221351427264100 ) ) ; +#4496 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -2.499999999999999100, -24.99999999999999600 ) ) ; +#4497 = EDGE_CURVE ( 'NONE', #1924, #9629, #7243, .T. ) ; +#4498 = CARTESIAN_POINT ( 'NONE', ( 34.28421860631541300, -12.54146173769615300, -25.00000000000076400 ) ) ; +#4499 = CARTESIAN_POINT ( 'NONE', ( 33.26994511351928500, -30.80572720709273700, 27.21714013610607100 ) ) ; +#4500 = CARTESIAN_POINT ( 'NONE', ( 39.42600577953412300, -31.35582386502766600, 10.19854342268432600 ) ) ; +#4501 = CARTESIAN_POINT ( 'NONE', ( 0.9297533935168768000, -7.907964956827896700, -21.52459445322779900 ) ) ; +#4502 = CARTESIAN_POINT ( 'NONE', ( 10.03757415778112400, -100.0000000000000300, -33.33891646864278600 ) ) ; +#4503 = CARTESIAN_POINT ( 'NONE', ( 12.94428593109300100, -30.89977021861972900, 27.66179804958623100 ) ) ; +#4504 = ORIENTED_EDGE ( 'NONE', *, *, #7448, .F. ) ; +#4505 = CARTESIAN_POINT ( 'NONE', ( 9.112596319186558000, -30.62344476031436000, 25.88413407610092100 ) ) ; +#4506 = CARTESIAN_POINT ( 'NONE', ( 34.92798103450442700, -20.27206251291653100, -23.72005803713037500 ) ) ; +#4507 = CARTESIAN_POINT ( 'NONE', ( 38.31905270229052700, -28.72585923428635000, 22.38489301700888100 ) ) ; +#4508 = ORIENTED_EDGE ( 'NONE', *, *, #5958, .T. ) ; +#4509 = CARTESIAN_POINT ( 'NONE', ( 38.22585676315129200, -30.11788651845458300, 24.18545263809849600 ) ) ; +#4510 = CARTESIAN_POINT ( 'NONE', ( -3.257968920476544300E-013, -9.971011864558503700, -12.33461420887880400 ) ) ; +#4511 = AXIS2_PLACEMENT_3D ( 'NONE', #1218, #170, #8307 ) ; +#4512 = CARTESIAN_POINT ( 'NONE', ( 35.19226728326805200, -30.93842885198616700, 26.16661613911087900 ) ) ; +#4513 = CARTESIAN_POINT ( 'NONE', ( 33.59424268543330100, -17.07142213206616800, -25.06701809440248100 ) ) ; +#4514 = VERTEX_POINT ( 'NONE', #12047 ) ; +#4515 = ORIENTED_EDGE ( 'NONE', *, *, #1974, .T. ) ; +#4516 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -9.592406127502339800, 8.005331014629273800 ) ) ; +#4517 = CARTESIAN_POINT ( 'NONE', ( 38.28799367709280000, -7.463541018600210500, -24.99999999999999600 ) ) ; +#4518 = CARTESIAN_POINT ( 'NONE', ( 10.03757415778112400, -12.49999999999998400, -17.91030565665267800 ) ) ; +#4519 = CARTESIAN_POINT ( 'NONE', ( 40.00000000002713600, -27.69553506646401400, 7.787118572750951100 ) ) ; +#4520 = ADVANCED_FACE ( 'NONE', ( #9625 ), #12630, .F. ) ; +#4521 = CARTESIAN_POINT ( 'NONE', ( 7.052825176941753100, -30.25831382609493000, 24.45639400448832400 ) ) ; +#4522 = ORIENTED_EDGE ( 'NONE', *, *, #5383, .T. ) ; +#4523 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#4524 = CARTESIAN_POINT ( 'NONE', ( 39.87489511114074500, -29.98748598589732900, 21.85553619787586400 ) ) ; +#4525 = ORIENTED_EDGE ( 'NONE', *, *, #7422, .F. ) ; +#4526 = VERTEX_POINT ( 'NONE', #7073 ) ; +#4527 = CARTESIAN_POINT ( 'NONE', ( 1.751120735233665700, -8.800629358799852800, -23.00000000000000000 ) ) ; +#4528 = CARTESIAN_POINT ( 'NONE', ( 5.007307699647380000, -22.31883967683662500, -11.46400233896166700 ) ) ; +#4529 = ORIENTED_EDGE ( 'NONE', *, *, #12927, .F. ) ; +#4530 = ADVANCED_FACE ( 'NONE', ( #9310 ), #10338, .T. ) ; +#4531 = CARTESIAN_POINT ( 'NONE', ( 14.50121923797498100, -95.07596123493897300, 16.22270505210122200 ) ) ; +#4532 = CARTESIAN_POINT ( 'NONE', ( 44.30096319509987500, -9.999999999999998200, 13.32741038030196500 ) ) ; +#4533 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999982200, -7.965845137862270800, 11.68747370507773900 ) ) ; +#4534 = CARTESIAN_POINT ( 'NONE', ( 25.83333613182624300, -12.50000000000000000, -22.94081745177113200 ) ) ; +#4535 = CARTESIAN_POINT ( 'NONE', ( 38.57680719560881500, -7.774001338484458400, -24.99999999999998900 ) ) ; +#4536 = CARTESIAN_POINT ( 'NONE', ( 32.78617648822980600, -19.70190016866899500, -24.87158464248752300 ) ) ; +#4537 = CARTESIAN_POINT ( 'NONE', ( 17.67901223377720400, -19.14220092040963200, 23.20505982656036200 ) ) ; +#4538 = CARTESIAN_POINT ( 'NONE', ( 5.462814924401620000, -29.63475384694197600, 22.50304008839014400 ) ) ; +#4539 = CARTESIAN_POINT ( 'NONE', ( 39.93129996710678900, -19.91699498919349100, 9.476131064423873000 ) ) ; +#4540 = CARTESIAN_POINT ( 'NONE', ( 10.87436439775858300, -30.14615118354441100, 26.85298621098282700 ) ) ; +#4541 = ORIENTED_EDGE ( 'NONE', *, *, #1125, .T. ) ; +#4542 = CARTESIAN_POINT ( 'NONE', ( -1.432979752863943300E-014, -5.117017080222876900, -19.44681622385180100 ) ) ; +#4543 = VERTEX_POINT ( 'NONE', #2864 ) ; +#4544 = CARTESIAN_POINT ( 'NONE', ( 33.69499392675168500, -28.26664598199354500, 25.47461412260777500 ) ) ; +#4545 = CARTESIAN_POINT ( 'NONE', ( 33.15791435313251200, -30.40062861723512800, 27.30212125610439600 ) ) ; +#4546 = CARTESIAN_POINT ( 'NONE', ( 34.52456195666776800, -37.55515651460508800, 16.68928315768979700 ) ) ; +#4547 = CARTESIAN_POINT ( 'NONE', ( 9.796162173108006900, -100.0000000000000300, -33.00341147329402200 ) ) ; +#4548 = CARTESIAN_POINT ( 'NONE', ( 12.94477882544276400, -30.77246976482101800, 27.68894288167658500 ) ) ; +#4549 = CARTESIAN_POINT ( 'NONE', ( 9.210882377576604400, -29.82832063987250500, 25.87693726903335900 ) ) ; +#4550 = CARTESIAN_POINT ( 'NONE', ( 18.54204732471590900, -28.02249633938530600, 27.50536197153453300 ) ) ; +#4551 = CARTESIAN_POINT ( 'NONE', ( 3.686937444635344500, -10.09245720446549700, -23.12513343103112000 ) ) ; +#4552 = ORIENTED_EDGE ( 'NONE', *, *, #5172, .F. ) ; +#4553 = EDGE_CURVE ( 'NONE', #6820, #3589, #7994, .T. ) ; +#4554 = PERSON_AND_ORGANIZATION ( #10194, #1109 ) ; +#4555 = CARTESIAN_POINT ( 'NONE', ( 37.75517627350753700, -31.00990155390625000, 23.62682541951651100 ) ) ; +#4556 = CARTESIAN_POINT ( 'NONE', ( 5.079904654838300000, -89.96976285135609400, -2.469206202559255800 ) ) ; +#4557 = ORIENTED_EDGE ( 'NONE', *, *, #10205, .F. ) ; +#4558 = CARTESIAN_POINT ( 'NONE', ( 0.5709277387881639400, -10.63624355778687800, -14.78807383134810900 ) ) ; +#4559 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6245, #2160, #1196, #8329 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.004719209247254007400 ), + .UNSPECIFIED. ) ; +#4560 = CARTESIAN_POINT ( 'NONE', ( 34.98222533499544800, -30.02579802430663800, 26.40050270794316800 ) ) ; +#4561 = CARTESIAN_POINT ( 'NONE', ( 34.88576150261282300, -13.36407974372122000, -24.99999999999996400 ) ) ; +#4562 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4563 = CARTESIAN_POINT ( 'NONE', ( 38.91262511426894100, -8.046014959529445700, -24.99482843957889600 ) ) ; +#4564 = CARTESIAN_POINT ( 'NONE', ( 9.796162173108006900, -12.49999999999998400, -17.57480066130391400 ) ) ; +#4565 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -96.20446068527158400, 16.38652170087207700 ) ) ; +#4566 = CARTESIAN_POINT ( 'NONE', ( 7.485539856970034700, -29.23856077709266900, 24.23417380452910300 ) ) ; +#4567 = CARTESIAN_POINT ( 'NONE', ( 13.39243829340135200, -28.94106800342490600, 28.18121015457344200 ) ) ; +#4568 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4569 = CARTESIAN_POINT ( 'NONE', ( 7.670714311895244100, -95.04909016087397300, 13.78823356494557500 ) ) ; +#4570 = CYLINDRICAL_SURFACE ( 'NONE', #3147, 1.200000000000003100 ) ; +#4571 = CARTESIAN_POINT ( 'NONE', ( 38.82310826141349500, -28.92300683658436700, 22.22304405374925200 ) ) ; +#4572 = ORIENTED_EDGE ( 'NONE', *, *, #12231, .F. ) ; +#4573 = CARTESIAN_POINT ( 'NONE', ( 4.996029053537258200, -19.98468035344853900, -11.41730989524199000 ) ) ; +#4574 = CARTESIAN_POINT ( 'NONE', ( 5.549909031887432700, -92.77294823610701300, 2.148011024611300000 ) ) ; +#4575 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4576 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999982900, -8.256540426919231700, 10.98150740444615400 ) ) ; +#4577 = EDGE_CURVE ( 'NONE', #10922, #4975, #1499, .T. ) ; +#4578 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#4579 = CARTESIAN_POINT ( 'NONE', ( 39.44221776317342400, -8.396099650129871300, -24.95341754985947000 ) ) ; +#4580 = CARTESIAN_POINT ( 'NONE', ( 34.85238396107151700, -19.73222104768536400, -23.92515806282881400 ) ) ; +#4581 = CARTESIAN_POINT ( 'NONE', ( 13.81387162633775900, -19.20855632506406300, 22.02932439127877700 ) ) ; +#4582 = FACE_OUTER_BOUND ( 'NONE', #11908, .T. ) ; +#4583 = CARTESIAN_POINT ( 'NONE', ( 6.454779526476579900, -30.79587551228340900, 22.48806931859847700 ) ) ; +#4584 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000700, -8.602224287577835000, 9.849430890723066800 ) ) ; +#4585 = CARTESIAN_POINT ( 'NONE', ( 18.34199828593765200, -100.0000000000000100, -38.28538062099280400 ) ) ; +#4586 = CARTESIAN_POINT ( 'NONE', ( 10.93636435051166700, -30.71728450775206900, 26.87625531042015600 ) ) ; +#4587 = CARTESIAN_POINT ( 'NONE', ( 40.57813356744142700, -11.76581070669131500, 19.20358988611725300 ) ) ; +#4588 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #9038, #4948, #11059 ), + ( #3915, #10042, #2913 ), + ( #7035, #942, #12389 ), + ( #5302, #11422, #4276 ), + ( #10398, #3263, #9392 ), + ( #2251, #8375, #1248 ), + ( #7349, #244, #6293 ), + ( #12351, #5254, #11373 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( -4.465503487816047100E-015, 0.003108551141146972300, 0.004662826711722691300, 0.006217102282298409900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9829366249987471200, 1.000000000000000000), + ( 1.000000000000000000, 0.9875174883918362800, 1.000000000000000000), + ( 1.000000000000000000, 0.9917385467796495700, 1.000000000000000000), + ( 1.000000000000000000, 0.9964495741046215400, 1.000000000000000000), + ( 1.000000000000000000, 0.9977411865825238600, 1.000000000000000000), + ( 1.000000000000000000, 0.9995105298914510600, 1.000000000000000000), + ( 1.000000000000000000, 0.9999997833084702800, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4589 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4590 = CARTESIAN_POINT ( 'NONE', ( 33.17152742951613200, -30.72291391792208500, 27.27763147666897600 ) ) ; +#4591 = CARTESIAN_POINT ( 'NONE', ( 7.579480468459270700, -12.50000000000001100, 10.98017088512115400 ) ) ; +#4592 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #4978, #8095, #10114 ), + ( #3988, #11139, #5026 ), + ( #12123, #6055, #2 ), + ( #7109, #1013, #8139 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.01394133909545554300, 0.01907868051756814200 ), + ( 0.0000000000000000000, 0.8352917476300401000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7598390280928584200, 0.9208870120594072600), + ( 1.000000000000000000, 0.7598511168733448300, 0.9208909943032217400), + ( 1.000000000000000000, 0.7598429325356074200, 0.9208882982472905700), + ( 1.000000000000000000, 0.7598139317266047200, 0.9208787449021542700) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4593 = CARTESIAN_POINT ( 'NONE', ( 1.608858230952074900, -8.679019578765913700, -22.70482009173712300 ) ) ; +#4594 = CARTESIAN_POINT ( 'NONE', ( 39.62342628378625200, -8.504005380771802800, -24.93380042406380800 ) ) ; +#4595 = CARTESIAN_POINT ( 'NONE', ( 32.85119804981698600, -9.999999999999992900, 26.73569495166160000 ) ) ; +#4596 = CARTESIAN_POINT ( 'NONE', ( 12.94427341097668500, -30.66008115172766700, 27.70380330369624000 ) ) ; +#4597 = AXIS2_PLACEMENT_3D ( 'NONE', #4159, #10278, #2133 ) ; +#4598 = CARTESIAN_POINT ( 'NONE', ( 9.260030316249642000, -30.93049532478191200, 25.80628711951653600 ) ) ; +#4599 = CARTESIAN_POINT ( 'NONE', ( 5.353743853687897800, -30.28078181837164000, 21.50848101629727100 ) ) ; +#4600 = CARTESIAN_POINT ( 'NONE', ( 3.214237058885747600, -9.299168937461093500, -24.12459983285383900 ) ) ; +#4601 = ADVANCED_FACE ( 'NONE', ( #3845 ), #8989, .F. ) ; +#4602 = CARTESIAN_POINT ( 'NONE', ( 10.71586147488974000, -12.54256544994144000, -24.99999999999613800 ) ) ; +#4603 = CARTESIAN_POINT ( 'NONE', ( 38.05707283101149600, -29.83783331492269800, 24.28165086546114500 ) ) ; +#4604 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, -6.893983271019065400, -17.08661135040214800 ) ) ; +#4605 = CARTESIAN_POINT ( 'NONE', ( 35.03899976938903600, -30.68268699228165300, 26.38293141708269500 ) ) ; +#4606 = CARTESIAN_POINT ( 'NONE', ( 44.16695029235427200, -9.032547107985900300, 15.39691315119428200 ) ) ; +#4607 = CARTESIAN_POINT ( 'NONE', ( 12.50623378839652300, -9.982318137399598600, -25.00000000000310200 ) ) ; +#4608 = CARTESIAN_POINT ( 'NONE', ( 39.99281005522834000, -8.704808754014841600, -24.87592211784252400 ) ) ; +#4609 = CARTESIAN_POINT ( 'NONE', ( 9.124150107193331700, -100.0000000000000300, -31.96792739358975800 ) ) ; +#4610 = CARTESIAN_POINT ( 'NONE', ( 5.738073660976223100, -22.86979464070988000, -16.85876459738159000 ) ) ; +#4611 = CARTESIAN_POINT ( 'NONE', ( 7.265037565291138800, -30.54952549905906900, 24.48252546933994000 ) ) ; +#4612 = CARTESIAN_POINT ( 'NONE', ( 9.160590014923883500, -31.04619807839566200, 25.98367538557029700 ) ) ; +#4613 = CARTESIAN_POINT ( 'NONE', ( 42.57496068755045100, -9.376712918904981800, -21.87573147861778700 ) ) ; +#4614 = VECTOR ( 'NONE', #69, 1000.000000000000000 ) ; +#4615 = CARTESIAN_POINT ( 'NONE', ( 39.85879393576772900, -29.66763998215946800, 22.06599345467999000 ) ) ; +#4616 = CARTESIAN_POINT ( 'NONE', ( 43.00000000000000000, 9.500000000000000000, -24.99999999999999600 ) ) ; +#4617 = CARTESIAN_POINT ( 'NONE', ( 3.952667369407049300, -17.89743420806452800, -11.34357630439888500 ) ) ; +#4618 = ORIENTED_EDGE ( 'NONE', *, *, #902, .T. ) ; +#4619 = CARTESIAN_POINT ( 'NONE', ( 2.602085213965211000E-015, -6.867906284554853100, 13.67404425488067500 ) ) ; +#4620 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000002100, -27.09143239524033200, 6.754920151478382100 ) ) ; +#4621 = CARTESIAN_POINT ( 'NONE', ( 18.46749068653817700, -30.69526230288029500, 28.85086688316349400 ) ) ; +#4622 = CARTESIAN_POINT ( 'NONE', ( 40.18199374255529200, -8.798148481462776600, -24.83729013395461400 ) ) ; +#4623 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -99.99999999999998600, -40.86942826376123600 ) ) ; +#4624 = CARTESIAN_POINT ( 'NONE', ( 5.591969262233556400, -30.01736524078972200, 22.66958341228524500 ) ) ; +#4625 = LINE ( 'NONE', #11076, #12705 ) ; +#4626 = CARTESIAN_POINT ( 'NONE', ( 44.44527721236816800, -10.93384449648909600, 9.904837797379585100 ) ) ; +#4627 = CARTESIAN_POINT ( 'NONE', ( 12.86537676327745300, -97.40634803306923600, 21.15396858868975400 ) ) ; +#4628 = CARTESIAN_POINT ( 'NONE', ( 10.96504399351473000, -30.20565964552846700, 26.90499370549508400 ) ) ; +#4629 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, -94.68648130466903000, 20.44522513542782200 ) ) ; +#4630 = EDGE_CURVE ( 'NONE', #7272, #6802, #5585, .T. ) ; +#4631 = CARTESIAN_POINT ( 'NONE', ( 33.15787669305359500, -31.00980437346939700, 27.19462030645251000 ) ) ; +#4632 = CARTESIAN_POINT ( 'NONE', ( 13.34003440676263200, -12.50000000000000900, 20.10969293953917600 ) ) ; +#4633 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6440, #12489, #12528, #6486, #428, #7540, #1430, #8561 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 8.845388854693243300E-018, 0.001652316293649411900, 0.002478474440474113400, 0.003304632587298819900 ), + .UNSPECIFIED. ) ; +#4634 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -97.51638471114853200, 22.06850012136331100 ) ) ; +#4635 = CARTESIAN_POINT ( 'NONE', ( 28.90889732659352500, -9.999999999999992900, 27.97104690260803700 ) ) ; +#4636 = CARTESIAN_POINT ( 'NONE', ( 13.25252080016806200, -30.81188074262313800, 27.78305207445836800 ) ) ; +#4637 = CARTESIAN_POINT ( 'NONE', ( 9.223599262066310100, -30.18136405356023000, 25.99374377226284200 ) ) ; +#4638 = FACE_OUTER_BOUND ( 'NONE', #11755, .T. ) ; +#4639 = CARTESIAN_POINT ( 'NONE', ( 42.49999999999999300, -5.000000000000000900, 22.50000000000000400 ) ) ; +#4640 = CARTESIAN_POINT ( 'NONE', ( 40.56503726021957600, -10.10661351334592000, 22.85399109349678800 ) ) ; +#4641 = CARTESIAN_POINT ( 'NONE', ( 5.881785806579540800, -10.48257707224037100, -24.49327791716946500 ) ) ; +#4642 = CARTESIAN_POINT ( 'NONE', ( 0.8450799996950028000, -8.389711229384591500, -19.69998625431980000 ) ) ; +#4643 = CARTESIAN_POINT ( 'NONE', ( 37.81981064935002500, -30.86463582058425500, 23.89214192593511400 ) ) ; +#4644 = ORIENTED_EDGE ( 'NONE', *, *, #227, .T. ) ; +#4645 = CARTESIAN_POINT ( 'NONE', ( 34.59433997089114100, -30.01891575804824400, 26.59893184223715700 ) ) ; +#4646 = ORIENTED_EDGE ( 'NONE', *, *, #12839, .F. ) ; +#4647 = AXIS2_PLACEMENT_3D ( 'NONE', #8773, #7700, #9817 ) ; +#4648 = CARTESIAN_POINT ( 'NONE', ( 0.6990312033972445600, -9.999999999999998200, 13.32741187784718800 ) ) ; +#4649 = CIRCLE ( 'NONE', #7986, 1.200000000000010200 ) ; +#4650 = CARTESIAN_POINT ( 'NONE', ( 11.67185617261934600, -10.62236255737226600, -25.04869047198656400 ) ) ; +#4651 = CARTESIAN_POINT ( 'NONE', ( 9.124150107193331700, -12.49999999999998400, -16.53931658159965000 ) ) ; +#4652 = CARTESIAN_POINT ( 'NONE', ( 13.24027549575856900, -23.75486222204562000, -25.80036924792753800 ) ) ; +#4653 = CARTESIAN_POINT ( 'NONE', ( 7.476247324069636800, -29.47939359313678400, 24.46668720246041700 ) ) ; +#4654 = CARTESIAN_POINT ( 'NONE', ( 6.001930388451866000, -28.88147467511077300, 21.70898095495168400 ) ) ; +#4655 = CARTESIAN_POINT ( 'NONE', ( 42.49563003279472900, -10.44154865655163200, -20.92187104639634800 ) ) ; +#4656 = CARTESIAN_POINT ( 'NONE', ( 38.99133357293959500, -95.07596123493894400, 0.4163258229740500700 ) ) ; +#4657 = EDGE_CURVE ( 'NONE', #10922, #7111, #11670, .T. ) ; +#4658 = CARTESIAN_POINT ( 'NONE', ( 38.85402034800534200, -30.64801990989943500, 21.91736407508675900 ) ) ; +#4659 = ORIENTED_EDGE ( 'NONE', *, *, #5098, .F. ) ; +#4660 = CARTESIAN_POINT ( 'NONE', ( 1.465458295705004600, -8.543304523825876000, -22.41495892257269800 ) ) ; +#4661 = CARTESIAN_POINT ( 'NONE', ( 5.006242951253606000, -22.32188609782196700, -11.50042163280505700 ) ) ; +#4662 = ADVANCED_FACE ( 'NONE', ( #4172 ), #1194, .F. ) ; +#4663 = LINE ( 'NONE', #1090, #12447 ) ; +#4664 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807600E-016 ) ) ; +#4665 = CARTESIAN_POINT ( 'NONE', ( 32.71968153551426200, -99.99999999999998600, 20.51727694122721600 ) ) ; +#4666 = CARTESIAN_POINT ( 'NONE', ( 10.32564040732231100, -19.92685267799069500, -24.01768961321897300 ) ) ; +#4667 = CARTESIAN_POINT ( 'NONE', ( 40.55865271327009200, -8.965734275607022900, -24.73526222364392500 ) ) ; +#4668 = CARTESIAN_POINT ( 'NONE', ( 20.09623509137657400, -27.98820108378806600, 27.51092117218616900 ) ) ; +#4669 = CARTESIAN_POINT ( 'NONE', ( 6.427605914041961900, -29.00557463902915600, 22.80481886124428900 ) ) ; +#4670 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.500000000000000000, 22.50000000000000700 ) ) ; +#4671 = CARTESIAN_POINT ( 'NONE', ( 15.65273288871555500, -28.08123352512465900, 26.96594673378586300 ) ) ; +#4672 = CARTESIAN_POINT ( 'NONE', ( 11.14207845553893800, -30.89548388110549500, 26.91922400553237800 ) ) ; +#4673 = EDGE_LOOP ( 'NONE', ( #12889, #6611, #8727, #6328 ) ) ; +#4674 = EDGE_CURVE ( 'NONE', #9655, #5489, #3540, .T. ) ; +#4675 = CARTESIAN_POINT ( 'NONE', ( 2.385309584937805600, -9.206862363065196700, -23.44938861037529100 ) ) ; +#4676 = EDGE_CURVE ( 'NONE', #10127, #7324, #867, .T. ) ; +#4677 = CARTESIAN_POINT ( 'NONE', ( 38.55392649324264900, -8.059371304809118900, -24.98094078606090200 ) ) ; +#4678 = CARTESIAN_POINT ( 'NONE', ( 32.86931415922786200, -30.68066203796582400, 27.40656316236993800 ) ) ; +#4679 = ORIENTED_EDGE ( 'NONE', *, *, #12651, .F. ) ; +#4680 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 9.500000000000000000, 22.50000000000000700 ) ) ; +#4681 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #12868, #12852, #12708, #12694 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 1.570796326794896600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#4682 = CARTESIAN_POINT ( 'NONE', ( 24.81280744310813100, -31.29913968154957600, 28.74438700826459600 ) ) ; +#4683 = CARTESIAN_POINT ( 'NONE', ( 27.93167299501765300, -19.14641537379972600, 23.13012793052096300 ) ) ; +#4684 = CARTESIAN_POINT ( 'NONE', ( 13.25144271462489300, -30.72988592016330900, 27.79573700268460000 ) ) ; +#4685 = ORIENTED_EDGE ( 'NONE', *, *, #7950, .F. ) ; +#4686 = CARTESIAN_POINT ( 'NONE', ( 9.503402611958652100, -31.14847278136921500, 25.79349413931179000 ) ) ; +#4687 = CARTESIAN_POINT ( 'NONE', ( 28.79971832931316200, -30.75177505912762000, 28.52778852916802100 ) ) ; +#4688 = ORIENTED_EDGE ( 'NONE', *, *, #10718, .T. ) ; +#4689 = CARTESIAN_POINT ( 'NONE', ( 7.500000007721790300, -95.07596123493894400, 12.92967538968956700 ) ) ; +#4690 = CARTESIAN_POINT ( 'NONE', ( 6.022554377072777900, -8.744170225699619400, -24.85998217763629700 ) ) ; +#4691 = ORIENTED_EDGE ( 'NONE', *, *, #12634, .F. ) ; +#4692 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -9.562556682370415100, -30.00000000000000000 ) ) ; +#4693 = CARTESIAN_POINT ( 'NONE', ( 37.80170001453664200, -29.41157674242924400, 24.16939726367191500 ) ) ; +#4694 = EDGE_LOOP ( 'NONE', ( #3269, #5657, #5818 ) ) ; +#4695 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4696 = CARTESIAN_POINT ( 'NONE', ( 34.65420287614704600, -30.56924469597682400, 26.61463621114308300 ) ) ; +#4697 = CARTESIAN_POINT ( 'NONE', ( 32.10687015880648700, -30.64843196616520200, 27.68671455920201300 ) ) ; +#4698 = VERTEX_POINT ( 'NONE', #516 ) ; +#4699 = CARTESIAN_POINT ( 'NONE', ( 10.34691790542965600, -11.60189504978087200, -25.00000000000000000 ) ) ; +#4700 = CARTESIAN_POINT ( 'NONE', ( 40.74661355033671800, -9.040367199920545700, -24.67187909417092200 ) ) ; +#4701 = CARTESIAN_POINT ( 'NONE', ( 8.745297715500241200, -100.0000000000000300, -31.23924336750126000 ) ) ; +#4702 = ORIENTED_EDGE ( 'NONE', *, *, #10326, .T. ) ; +#4703 = CARTESIAN_POINT ( 'NONE', ( 7.769906062736788000, -30.93949504536308500, 24.50384437055671300 ) ) ; +#4704 = CARTESIAN_POINT ( 'NONE', ( 37.17153512205147300, -94.93423344913993800, 14.62504416783265900 ) ) ; +#4705 = CARTESIAN_POINT ( 'NONE', ( 42.49890297944508400, -9.240536455385907300, -23.55289141356945500 ) ) ; +#4706 = CARTESIAN_POINT ( 'NONE', ( 36.35153314668018300, -89.50553548956861500, 5.756509624867495800 ) ) ; +#4707 = CARTESIAN_POINT ( 'NONE', ( 39.49901133710821500, -29.32084699805870200, 22.24098142462176500 ) ) ; +#4708 = CARTESIAN_POINT ( 'NONE', ( 23.27093581436938100, -31.32859326669795800, 28.73919354652434400 ) ) ; +#4709 = CARTESIAN_POINT ( 'NONE', ( 15.55846279649623800, -100.0000000000000300, 5.807110827402651900 ) ) ; +#4710 = ORIENTED_EDGE ( 'NONE', *, *, #11258, .F. ) ; +#4711 = CARTESIAN_POINT ( 'NONE', ( 36.43508702664633600, -30.54572675467332100, 25.52842566577107100 ) ) ; +#4712 = ORIENTED_EDGE ( 'NONE', *, *, #7548, .F. ) ; +#4713 = CARTESIAN_POINT ( 'NONE', ( 25.52742777465184400, -31.28402665534755300, 28.74705122376108700 ) ) ; +#4714 = VERTEX_POINT ( 'NONE', #474 ) ; +#4715 = EDGE_CURVE ( 'NONE', #3452, #8459, #3222, .T. ) ; +#4716 = CARTESIAN_POINT ( 'NONE', ( 43.95073734173138300, -8.074363754076124200, 17.21664755057800300 ) ) ; +#4717 = CARTESIAN_POINT ( 'NONE', ( 41.12158535080768500, -9.167323334717156800, -24.51482868586729000 ) ) ; +#4718 = CARTESIAN_POINT ( 'NONE', ( 6.873098691557440400, -95.07596123493895800, 13.66591453372637200 ) ) ; +#4719 = CARTESIAN_POINT ( 'NONE', ( 6.147382116318207900, -30.44368658230091600, 23.04263641563145600 ) ) ; +#4720 = CARTESIAN_POINT ( 'NONE', ( 4.015035958127207900, -11.31614627559834200, -22.65891013177805700 ) ) ; +#4721 = CARTESIAN_POINT ( 'NONE', ( 29.92820776914512500, -23.83513887852952400, -26.62962235476243900 ) ) ; +#4722 = CARTESIAN_POINT ( 'NONE', ( 11.14207869523033700, -30.41341457929566200, 27.00423065058556900 ) ) ; +#4723 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4724 = ORIENTED_EDGE ( 'NONE', *, *, #1377, .T. ) ; +#4725 = CARTESIAN_POINT ( 'NONE', ( 38.75808672497473100, -9.850259915320897600, -24.74508707877045700 ) ) ; +#4726 = CARTESIAN_POINT ( 'NONE', ( 32.86374773652544000, -30.94048095405085900, 27.34593043768244800 ) ) ; +#4727 = CARTESIAN_POINT ( 'NONE', ( 3.844629486347477700, -11.23571604708997100, -22.46755997374653900 ) ) ; +#4728 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, 9.500000000000000000, 0.0000000000000000000 ) ) ; +#4729 = ORIENTED_EDGE ( 'NONE', *, *, #11011, .T. ) ; +#4730 = CIRCLE ( 'NONE', #3560, 2.000000000000001800 ) ; +#4731 = CARTESIAN_POINT ( 'NONE', ( 8.745297715500241200, -12.49999999999998400, -15.81063255551114800 ) ) ; +#4732 = CARTESIAN_POINT ( 'NONE', ( 13.35478920376318800, -30.83916959280285000, 27.81061259856934600 ) ) ; +#4733 = CARTESIAN_POINT ( 'NONE', ( 9.383777401890366600, -30.44275953856075400, 26.10422800806188100 ) ) ; +#4734 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -30.66316004106086300, 28.85652737806402600 ) ) ; +#4735 = CARTESIAN_POINT ( 'NONE', ( 6.712006322907197600, -7.463541018600214000, -25.00000000000000000 ) ) ; +#4736 = ADVANCED_FACE ( 'NONE', ( #11359 ), #302, .T. ) ; +#4737 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4738 = CARTESIAN_POINT ( 'NONE', ( 38.03753133870557000, -30.50806085101150000, 24.18462473831989700 ) ) ; +#4739 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999969100, -23.91420473869548500, -27.45344971053350500 ) ) ; +#4740 = EDGE_CURVE ( 'NONE', #3333, #6124, #8682, .T. ) ; +#4741 = CYLINDRICAL_SURFACE ( 'NONE', #2050, 3.189999999999994200 ) ; +#4742 = CARTESIAN_POINT ( 'NONE', ( 34.59450201087094700, -31.12673978760407000, 26.40390439286141300 ) ) ; +#4743 = CARTESIAN_POINT ( 'NONE', ( 33.63453322443903900, -30.27696660470622800, 27.09296079827149500 ) ) ; +#4744 = EDGE_LOOP ( 'NONE', ( #11040, #11071, #11241, #11264, #11411, #7961, #8112, #8386, #8596, #8872 ) ) ; +#4745 = CARTESIAN_POINT ( 'NONE', ( 41.30748707709655300, -9.219033497899559400, -24.42129326342595500 ) ) ; +#4746 = CARTESIAN_POINT ( 'NONE', ( 8.281484463966927800, -100.0000000000000300, -30.08826940046394700 ) ) ; +#4747 = CARTESIAN_POINT ( 'NONE', ( 7.589399335410795400, -29.96343173697151800, 24.86635751165700400 ) ) ; +#4748 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000900, 17.50000000000000400 ) ) ; +#4749 = CARTESIAN_POINT ( 'NONE', ( 6.073349384952774900, -30.58061852351529500, 21.58594518583720800 ) ) ; +#4750 = CARTESIAN_POINT ( 'NONE', ( 31.48176329627723600, -95.07596123493894400, 14.90794226952058700 ) ) ; +#4751 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -8.819647309268738400, -11.53187069007421600 ) ) ; +#4752 = CARTESIAN_POINT ( 'NONE', ( 39.20339930133297900, -30.48345820918718000, 22.03813022830728100 ) ) ; +#4753 = CARTESIAN_POINT ( 'NONE', ( 39.99999973802874800, -29.76891309500929900, 21.59912727361098200 ) ) ; +#4754 = FACE_OUTER_BOUND ( 'NONE', #11136, .T. ) ; +#4755 = DIRECTION ( 'NONE', ( 0.3446557976510500300, -0.9387291308708377600, 0.0000000000000000000 ) ) ; +#4756 = CARTESIAN_POINT ( 'NONE', ( 16.74166765707605400, -100.0000000000000300, 6.197625101945618600 ) ) ; +#4757 = CARTESIAN_POINT ( 'NONE', ( 36.16720293731845700, -29.58411973713571200, 25.51653520389583100 ) ) ; +#4758 = CARTESIAN_POINT ( 'NONE', ( 28.67839116457453500, -31.10615637425000200, 28.47904156249293500 ) ) ; +#4759 = CARTESIAN_POINT ( 'NONE', ( 20.15009325285710100, -28.77556518705056400, 29.18936127947247500 ) ) ; +#4760 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #573, #965, #524, #499 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 6.135433673708080100E-005 ), + .UNSPECIFIED. ) ; +#4761 = EDGE_CURVE ( 'NONE', #7387, #7111, #5930, .T. ) ; +#4762 = CARTESIAN_POINT ( 'NONE', ( 44.84189452951913100, -6.538783675708352800, 16.19443573832196700 ) ) ; +#4763 = CARTESIAN_POINT ( 'NONE', ( 11.29975687516398800, -95.07596123493894400, 15.09984293017863200 ) ) ; +#4764 = CARTESIAN_POINT ( 'NONE', ( 6.351747107661768900, -29.29528344283398400, 23.20023048349488100 ) ) ; +#4765 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4766 = CARTESIAN_POINT ( 'NONE', ( 38.50710657345666700, -23.05633360591613400, -18.71341219642485100 ) ) ; +#4767 = CARTESIAN_POINT ( 'NONE', ( 11.25381536413403100, -31.03573744532601700, 26.91132879661617800 ) ) ; +#4768 = FACE_OUTER_BOUND ( 'NONE', #10022, .T. ) ; +#4769 = CARTESIAN_POINT ( 'NONE', ( 29.41419732678950500, -20.06674048095947800, 22.55852270762774500 ) ) ; +#4770 = CARTESIAN_POINT ( 'NONE', ( 40.09502986767936500, -9.843468695361583100, -24.19091904143516900 ) ) ; +#4771 = ORIENTED_EDGE ( 'NONE', *, *, #10146, .T. ) ; +#4772 = CARTESIAN_POINT ( 'NONE', ( 32.66470075422089500, -30.60296714391351400, 27.49205469662863500 ) ) ; +#4773 = CARTESIAN_POINT ( 'NONE', ( 8.343828509952652800, -18.01237507300752600, -23.06837513076480000 ) ) ; +#4774 = DIRECTION ( 'NONE', ( -0.9387291308708378700, -0.3446557976510498700, 1.265221111960222200E-012 ) ) ; +#4775 = VECTOR ( 'NONE', #458, 1000.000000000000000 ) ; +#4776 = CARTESIAN_POINT ( 'NONE', ( 8.281484463966927800, -12.49999999999998400, -14.65965858847383700 ) ) ; +#4777 = CARTESIAN_POINT ( 'NONE', ( 13.35478794667374200, -30.77118176862066400, 27.82260022318572000 ) ) ; +#4778 = AXIS2_PLACEMENT_3D ( 'NONE', #2717, #9852, #3721 ) ; +#4779 = CARTESIAN_POINT ( 'NONE', ( 9.509360032847528300, -29.76954458919419700, 26.02736993900968100 ) ) ; +#4780 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 9.500000000000000000, 1.981438871123700300 ) ) ; +#4781 = CARTESIAN_POINT ( 'NONE', ( 6.794959126321293400, -22.44734358313588300, 14.81051053880443600 ) ) ; +#4782 = CARTESIAN_POINT ( 'NONE', ( 36.25470228449976400, -100.0000000000000100, -0.4996131600212422300 ) ) ; +#4783 = CARTESIAN_POINT ( 'NONE', ( 2.602085213965211800E-015, -8.294000810282636100, -14.45268620721437000 ) ) ; +#4784 = CARTESIAN_POINT ( 'NONE', ( 37.51420886036648000, -29.23850772369755200, 24.23432694605275400 ) ) ; +#4785 = CARTESIAN_POINT ( 'NONE', ( 27.00629059358296400, -19.72305216270445900, -26.71443643112052200 ) ) ; +#4786 = CIRCLE ( 'NONE', #8687, 3.189999999999995100 ) ; +#4787 = CARTESIAN_POINT ( 'NONE', ( 34.45182063502486600, -30.43609245176595800, 26.72512140044652200 ) ) ; +#4788 = CARTESIAN_POINT ( 'NONE', ( 35.80856055528178000, -29.68186679217448500, 25.79600025490539000 ) ) ; +#4789 = CARTESIAN_POINT ( 'NONE', ( 41.66717672720707100, -9.289858232766112800, -24.20864665857262200 ) ) ; +#4790 = CARTESIAN_POINT ( 'NONE', ( 8.144131370910599800, -100.0000000000000300, -29.69330526753333300 ) ) ; +#4791 = CARTESIAN_POINT ( 'NONE', ( 8.036605895355439300, -31.11986271925819000, 24.50518734965074700 ) ) ; +#4792 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000700, -23.91420473869548900, -27.45344971053349800 ) ) ; +#4793 = CARTESIAN_POINT ( 'NONE', ( 7.333134869006870300, -31.02743953696868200, 23.72857579364882600 ) ) ; +#4794 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000001100, -95.07596123493894400, 9.998812624573373500 ) ) ; +#4795 = CARTESIAN_POINT ( 'NONE', ( 42.99999999993459500, 9.663626396092121600, -25.00000000000000000 ) ) ; +#4796 = CARTESIAN_POINT ( 'NONE', ( 38.82267986951638500, -29.05414053646072100, 22.60552947922562700 ) ) ; +#4797 = FACE_OUTER_BOUND ( 'NONE', #7581, .T. ) ; +#4798 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4799 = CARTESIAN_POINT ( 'NONE', ( 15.55846279649623800, -12.49999999999999600, 21.23572163939276100 ) ) ; +#4800 = CARTESIAN_POINT ( 'NONE', ( 36.34874316025885600, -30.34861689192202000, 25.63317798569941900 ) ) ; +#4801 = CARTESIAN_POINT ( 'NONE', ( 4.832049979965080200, -7.601511949594445200, 25.00000000000000000 ) ) ; +#4802 = CARTESIAN_POINT ( 'NONE', ( 27.23474286682213100, -18.04987151635700800, -28.03603831721901000 ) ) ; +#4803 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999889900, -4.999999999999988500, 16.06938735382970400 ) ) ; +#4804 = CARTESIAN_POINT ( 'NONE', ( 41.84416060353999700, -9.309431554183079900, -24.08749983598079700 ) ) ; +#4805 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #12441, #4320, #3270 ), + ( #348, #7447, #1338 ), + ( #8481, #2339, #9481 ), + ( #3360, #10497, #4363 ), + ( #11511, #5407, #12488 ), + ( #6438, #390, #7495 ), + ( #1384, #8518, #2380 ), + ( #9528, #3398, #10535 ), + ( #4410, #11557, #5449 ), + ( #12524, #6483, #426 ), + ( #7536, #1428, #8558 ), + ( #2416, #9569, #3441 ), + ( #10572, #4450, #11599 ), + ( #5491, #12559, #6526 ), + ( #468, #7572, #1465 ), + ( #8608, #2458, #9607 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.003259104033808319500, 0.006518208067616639000, 0.008147760084520798800, 0.009777312101424958500, 0.01059208810987703800, 0.01140686411832911800, 0.01303641613523327800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.4931454283001431300, 1.000000000000000000), + ( 1.000000000000000000, 0.4931320981793671000, 1.000000000000000000), + ( 1.000000000000000000, 0.4931949942720768000, 1.000000000000000000), + ( 1.000000000000000000, 0.4935811994044475600, 1.000000000000000000), + ( 1.000000000000000000, 0.4938415038534759200, 1.000000000000000000), + ( 1.000000000000000000, 0.4943676275168428800, 1.000000000000000000), + ( 1.000000000000000000, 0.4945727909186339300, 1.000000000000000000), + ( 1.000000000000000000, 0.4950260224236220400, 1.000000000000000000), + ( 1.000000000000000000, 0.4952558202035633500, 1.000000000000000000), + ( 1.000000000000000000, 0.4956646225918658900, 1.000000000000000000), + ( 1.000000000000000000, 0.4957908788289649400, 1.000000000000000000), + ( 1.000000000000000000, 0.4960671350599173400, 1.000000000000000000), + ( 1.000000000000000000, 0.4962112208630711800, 1.000000000000000000), + ( 1.000000000000000000, 0.4966665181176825900, 1.000000000000000000), + ( 1.000000000000000000, 0.4970015337745588000, 1.000000000000000000), + ( 1.000000000000000000, 0.4973655342198660700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4806 = CARTESIAN_POINT ( 'NONE', ( 15.36064349583751800, -95.07596123493894400, 17.44017706019604600 ) ) ; +#4807 = CARTESIAN_POINT ( 'NONE', ( 6.654542003367440700, -30.80891521855830100, 23.09761271828049400 ) ) ; +#4808 = CARTESIAN_POINT ( 'NONE', ( 44.99999999998795600, -9.874519388827279100, 9.702558140719350600 ) ) ; +#4809 = CARTESIAN_POINT ( 'NONE', ( 43.53490870857716300, -8.543036131005738600, -22.41410023299051700 ) ) ; +#4810 = CARTESIAN_POINT ( 'NONE', ( 11.23205852822942000, -30.59903071772866000, 27.03677789887049000 ) ) ; +#4811 = CIRCLE ( 'NONE', #8176, 2.500000000000000000 ) ; +#4812 = CARTESIAN_POINT ( 'NONE', ( 10.12172527795426900, -19.34647992396295300, 19.58551380057488300 ) ) ; +#4813 = CARTESIAN_POINT ( 'NONE', ( 1.751120735233655700, -8.800629358799856300, -22.99999999999999600 ) ) ; +#4814 = CARTESIAN_POINT ( 'NONE', ( 41.78504805807651900, -9.299097690902327100, -24.12508916002346000 ) ) ; +#4815 = CARTESIAN_POINT ( 'NONE', ( 32.66601884482368900, -30.83167179912254600, 27.45592070870536000 ) ) ; +#4816 = CARTESIAN_POINT ( 'NONE', ( 6.516365209376448100, -9.764518501568938200, 28.20265226274062100 ) ) ; +#4817 = CARTESIAN_POINT ( 'NONE', ( 24.80102881064236800, -9.999999999999989300, 28.36086946431093400 ) ) ; +#4818 = CARTESIAN_POINT ( 'NONE', ( 13.55976278807847500, -30.84325950280997100, 27.87368024710706000 ) ) ; +#4819 = ORIENTED_EDGE ( 'NONE', *, *, #3483, .F. ) ; +#4820 = CARTESIAN_POINT ( 'NONE', ( 9.481302335575000100, -30.62375146813085200, 26.12399044978686300 ) ) ; +#4821 = EDGE_LOOP ( 'NONE', ( #2326, #2352, #2452, #2484, #2506, #2616, #2661 ) ) ; +#4822 = CARTESIAN_POINT ( 'NONE', ( -9.410536043995276800E-016, 9.723972447247822600, 15.80114926534604800 ) ) ; +#4823 = CARTESIAN_POINT ( 'NONE', ( 15.58600475227272500, -20.06672754409498400, 22.55858813462953400 ) ) ; +#4824 = CARTESIAN_POINT ( 'NONE', ( 28.28987907430277500, -100.0000000000000100, 6.210915839114809600 ) ) ; +#4825 = CARTESIAN_POINT ( 'NONE', ( 5.514027001502780600, -30.30646022589725100, 21.50395274837009300 ) ) ; +#4826 = CARTESIAN_POINT ( 'NONE', ( 37.94690532645285700, -30.25835062778004300, 24.45668493080105000 ) ) ; +#4827 = CARTESIAN_POINT ( 'NONE', ( 32.55163702396422600, -18.34258256430397800, -26.47102239487437100 ) ) ; +#4828 = CARTESIAN_POINT ( 'NONE', ( 34.42675134049430600, -31.00471199963323300, 26.57508509546212100 ) ) ; +#4829 = CARTESIAN_POINT ( 'NONE', ( 37.69407352361438500, -29.19142594012044300, 24.01850553452164800 ) ) ; +#4830 = VERTEX_POINT ( 'NONE', #7584 ) ; +#4831 = CARTESIAN_POINT ( 'NONE', ( 42.49890297944508400, -9.240536455385902000, -23.55289141356945800 ) ) ; +#4832 = CARTESIAN_POINT ( 'NONE', ( 46.09563033533105900, -7.808739329337819300, 8.005331014629273800 ) ) ; +#4833 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1524, #3503, #8666 ), + ( #2527, #9670, #3543 ), + ( #10675, #4551, #11697 ), + ( #5598, #12664, #6640 ), + ( #563, #7681, #1571 ), + ( #8706, #2569, #9710 ), + ( #3588, #10714, #4600 ), + ( #11737, #5643, #12697 ), + ( #6684, #606, #7721 ), + ( #1613, #8752, #2610 ), + ( #9751, #3636, #10762 ), + ( #4641, #11779, #5687 ), + ( #12739, #6729, #655 ), + ( #7765, #1654, #8794 ), + ( #2658, #9789, #3675 ), + ( #10806, #4690, #11815 ), + ( #5733, #12777, #6769 ), + ( #692, #7813, #1697 ), + ( #8833, #2703, #9836 ), + ( #3709, #10846, #4735 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -1.691355389077386900E-017, 0.001392630451137295000, 0.002088945676705950900, 0.002785260902274606900, 0.004177891353411919100, 0.005570521804549231200, 0.006963152255686543300, 0.008355782706823855500, 0.009748413157961167600, 0.01114104360909848000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9645529253283149400, 1.000000000000000000), + ( 1.000000000000000000, 0.9638720627505101800, 1.000000000000000000), + ( 1.000000000000000000, 0.9635351545407359100, 1.000000000000000000), + ( 1.000000000000000000, 0.9636153836217104000, 1.000000000000000000), + ( 1.000000000000000000, 0.9637396876698896000, 1.000000000000000000), + ( 1.000000000000000000, 0.9641954051515948500, 1.000000000000000000), + ( 1.000000000000000000, 0.9645295584664551600, 1.000000000000000000), + ( 1.000000000000000000, 0.9658347732334219300, 1.000000000000000000), + ( 1.000000000000000000, 0.9671065640422384900, 1.000000000000000000), + ( 1.000000000000000000, 0.9704002846990373900, 1.000000000000000000), + ( 1.000000000000000000, 0.9724491352650873600, 1.000000000000000000), + ( 1.000000000000000000, 0.9770407256565983900, 1.000000000000000000), + ( 1.000000000000000000, 0.9795874218608100500, 1.000000000000000000), + ( 1.000000000000000000, 0.9849107851659193400, 1.000000000000000000), + ( 1.000000000000000000, 0.9877024070151013700, 1.000000000000000000), + ( 1.000000000000000000, 0.9928392048351454300, 1.000000000000000000), + ( 1.000000000000000000, 0.9952175677233372500, 1.000000000000000000), + ( 1.000000000000000000, 0.9988102473927136200, 1.000000000000000000), + ( 1.000000000000000000, 1.000006630278647700, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4834 = CARTESIAN_POINT ( 'NONE', ( 7.720937671896901800, -30.26713460154569900, 25.00406732440923100 ) ) ; +#4835 = VERTEX_POINT ( 'NONE', #4496 ) ; +#4836 = CARTESIAN_POINT ( 'NONE', ( 13.75272459553964300, -21.83025975192874300, -25.94120093792119900 ) ) ; +#4837 = CARTESIAN_POINT ( 'NONE', ( 9.336172583513342000, -31.16911093733396900, 25.64853423531861400 ) ) ; +#4838 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122092400, 0.1736481776669238900 ) ) ; +#4839 = CARTESIAN_POINT ( 'NONE', ( 44.45478673545410000, 11.21014323262609500, -24.45478673545416000 ) ) ; +#4840 = EDGE_CURVE ( 'NONE', #11075, #10590, #561, .T. ) ; +#4841 = CARTESIAN_POINT ( 'NONE', ( 39.50519451255120600, -30.13714599120364600, 22.41387702901766200 ) ) ; +#4842 = EDGE_LOOP ( 'NONE', ( #4702, #10761, #631, #9937 ) ) ; +#4843 = CARTESIAN_POINT ( 'NONE', ( 34.88702417045478700, -32.09638995667384600, 24.17620793761279400 ) ) ; +#4844 = CARTESIAN_POINT ( 'NONE', ( 15.95067698649139700, -100.0000000000000300, 5.951366538839391000 ) ) ; +#4845 = ORIENTED_EDGE ( 'NONE', *, *, #12207, .T. ) ; +#4846 = CARTESIAN_POINT ( 'NONE', ( 36.17562711827240200, -31.14741781278421900, 25.25265253549470000 ) ) ; +#4847 = CARTESIAN_POINT ( 'NONE', ( 7.965853276969276000, -11.20318974737554300, 23.86938681821392900 ) ) ; +#4848 = CARTESIAN_POINT ( 'NONE', ( 30.42447995087371400, -23.81457599057361900, -26.41677463853975300 ) ) ; +#4849 = VERTEX_POINT ( 'NONE', #8652 ) ; +#4850 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#4851 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4134, #4175, #4439, #4119, #4069, #4036, #4020, #3992, #3934, #3908 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001065464361979365200, 0.002130928723958730500, 0.003196393085938095700, 0.004261857447917460900 ), + .UNSPECIFIED. ) ; +#4852 = CARTESIAN_POINT ( 'NONE', ( 6.195679886120122300, -29.77849728172228400, 23.43960950443723600 ) ) ; +#4853 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999996400, -8.683064576717079300, 9.474686049702681200 ) ) ; +#4854 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -97.57596123493894400, 11.50239124669685800 ) ) ; +#4855 = CARTESIAN_POINT ( 'NONE', ( 11.45089845196207200, -31.04650581342682300, 27.00085101060592800 ) ) ; +#4856 = ORIENTED_EDGE ( 'NONE', *, *, #12880, .F. ) ; +#4857 = CARTESIAN_POINT ( 'NONE', ( 7.652831032405695000, -19.50696404466983600, 16.74156005283819200 ) ) ; +#4858 = CARTESIAN_POINT ( 'NONE', ( 38.20514000828477900, -22.44744359963570400, 14.81030628274094100 ) ) ; +#4859 = ORIENTED_EDGE ( 'NONE', *, *, #12021, .F. ) ; +#4860 = CARTESIAN_POINT ( 'NONE', ( 40.98364669624792400, -11.31676804806229300, -22.66038938665523300 ) ) ; +#4861 = CARTESIAN_POINT ( 'NONE', ( 32.25902651283402600, -30.61929511531396400, 27.63761324926353100 ) ) ; +#4862 = CARTESIAN_POINT ( 'NONE', ( 11.08191428609448300, -95.07596123493894400, 14.41445870334524800 ) ) ; +#4863 = CARTESIAN_POINT ( 'NONE', ( 8.619763031165113900, -9.095086894285170600, 25.32428663018494700 ) ) ; +#4864 = CARTESIAN_POINT ( 'NONE', ( 8.144131370910599800, -12.49999999999998400, -14.26469445554322500 ) ) ; +#4865 = CARTESIAN_POINT ( 'NONE', ( 13.56046104631500000, -30.81139885504226300, 27.87966474745787000 ) ) ; +#4866 = CARTESIAN_POINT ( 'NONE', ( 9.581746832956268300, -29.84942850753953500, 26.10178325096081400 ) ) ; +#4867 = CARTESIAN_POINT ( 'NONE', ( 18.94274183372582600, -94.74682992296706600, 18.71443453778743700 ) ) ; +#4868 = CARTESIAN_POINT ( 'NONE', ( 24.92001895720699200, -25.57032304887206600, 22.25479305975142100 ) ) ; +#4869 = ORIENTED_EDGE ( 'NONE', *, *, #2550, .T. ) ; +#4870 = CARTESIAN_POINT ( 'NONE', ( 5.514026222764642600, -29.11476104942522300, 21.71408100090721400 ) ) ; +#4871 = CARTESIAN_POINT ( 'NONE', ( 37.51323173451399400, -31.05320464602126400, 23.91343584002327600 ) ) ; +#4872 = ORIENTED_EDGE ( 'NONE', *, *, #4657, .F. ) ; +#4873 = CARTESIAN_POINT ( 'NONE', ( 37.17565607875969400, -19.18581458341659400, -21.75575238783685000 ) ) ; +#4874 = AXIS2_PLACEMENT_3D ( 'NONE', #7770, #6773, #4695 ) ; +#4875 = CARTESIAN_POINT ( 'NONE', ( 34.13934973591207700, -30.25685733692707700, 26.86321069244544500 ) ) ; +#4876 = CARTESIAN_POINT ( 'NONE', ( 38.43751576058416200, -29.01636586506699800, 22.98488588658256400 ) ) ; +#4877 = CARTESIAN_POINT ( 'NONE', ( 7.813280731601873100, -12.49999999999998400, -13.07146945415123800 ) ) ; +#4878 = EDGE_LOOP ( 'NONE', ( #8410, #5966, #11406, #9029, #3887, #1537 ) ) ; +#4879 = CARTESIAN_POINT ( 'NONE', ( 8.037330017575302000, -29.37556132130525900, 24.81194024175961100 ) ) ; +#4880 = CARTESIAN_POINT ( 'NONE', ( 12.45025853406836600, -18.34389560677931600, -26.47125391969010600 ) ) ; +#4881 = PERSON_AND_ORGANIZATION ( #10194, #1109 ) ; +#4882 = CARTESIAN_POINT ( 'NONE', ( 11.74385212410814100, -31.01957321644858500, 27.14724162181303800 ) ) ; +#4883 = CARTESIAN_POINT ( 'NONE', ( 8.688357134377263000, -18.37552708038034100, -23.19151309714417100 ) ) ; +#4884 = CARTESIAN_POINT ( 'NONE', ( 44.15206692787401000, 11.38346697805872400, -22.83041338557487500 ) ) ; +#4885 = ORIENTED_EDGE ( 'NONE', *, *, #9229, .T. ) ; +#4886 = CARTESIAN_POINT ( 'NONE', ( 38.54640506378142800, -28.99241106857003600, 22.80707311874922300 ) ) ; +#4887 = CARTESIAN_POINT ( 'NONE', ( 19.54863868000914800, -23.76632603630233500, -27.42197122178796700 ) ) ; +#4888 = CARTESIAN_POINT ( 'NONE', ( 4.995494126177473700, -19.98640922855242500, -11.46464591761147400 ) ) ; +#4889 = CARTESIAN_POINT ( 'NONE', ( 36.13615592604281800, -30.11389074646921300, 25.75582809028854600 ) ) ; +#4890 = CARTESIAN_POINT ( 'NONE', ( 10.17879246737545700, -11.29195594629069900, 25.00000000000000700 ) ) ; +#4891 = CARTESIAN_POINT ( 'NONE', ( 34.54794381256973400, -20.66443825245343600, -23.41399716598487400 ) ) ; +#4892 = EDGE_LOOP ( 'NONE', ( #8724, #8739, #8881, #9036, #7492 ) ) ; +#4893 = AXIS2_PLACEMENT_3D ( 'NONE', #4103, #6168, #114 ) ; +#4894 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -95.07596123493895800, 11.50239124669685300 ) ) ; +#4895 = CARTESIAN_POINT ( 'NONE', ( 42.34273874869081300, -9.285953202349494600, -23.69248717999407500 ) ) ; +#4896 = CARTESIAN_POINT ( 'NONE', ( 11.69632975031524500, -7.510164318494805300, -31.30913433057072500 ) ) ; +#4897 = LINE ( 'NONE', #3440, #7972 ) ; +#4898 = CARTESIAN_POINT ( 'NONE', ( 6.981301522894725900, -30.95428919201290100, 23.28628431121336500 ) ) ; +#4899 = CARTESIAN_POINT ( 'NONE', ( 44.45973820335756700, -11.01019611582433600, 9.174838953452365300 ) ) ; +#4900 = ORIENTED_EDGE ( 'NONE', *, *, #95, .T. ) ; +#4901 = CARTESIAN_POINT ( 'NONE', ( 9.749190902944551600, -99.99999999999997200, 19.64462267308837100 ) ) ; +#4902 = CARTESIAN_POINT ( 'NONE', ( 11.42990004119660700, -30.71177701434939100, 27.10783310374007700 ) ) ; +#4903 = ADVANCED_FACE ( 'NONE', ( #6260 ), #2911, .F. ) ; +#4904 = CARTESIAN_POINT ( 'NONE', ( 6.163665243155824300, -19.66469880909141600, 13.94659681593353900 ) ) ; +#4905 = CARTESIAN_POINT ( 'NONE', ( 39.99600406042304700, -26.84141164200304900, 7.162103117946997200 ) ) ; +#4906 = CARTESIAN_POINT ( 'NONE', ( 32.09863200989555300, -9.562556682370411600, -25.00000000000000000 ) ) ; +#4907 = CARTESIAN_POINT ( 'NONE', ( 32.25989316937008100, -30.78267393194946100, 27.61629630217110100 ) ) ; +#4908 = CARTESIAN_POINT ( 'NONE', ( 12.67157806891463100, -38.43448292188914200, 18.08984355045520000 ) ) ; +#4909 = CARTESIAN_POINT ( 'NONE', ( 40.86163949412761600, -7.346822827177097000, 22.50000000000000400 ) ) ; +#4910 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000004400, -12.49999999999998400, -11.04234022271424300 ) ) ; +#4911 = CARTESIAN_POINT ( 'NONE', ( 13.66271934689355300, -30.83581715482863200, 27.90612350705921300 ) ) ; +#4912 = CARTESIAN_POINT ( 'NONE', ( 39.89833328847912200, -29.44208863240674000, 21.65675544038649000 ) ) ; +#4913 = CIRCLE ( 'NONE', #3393, 4.999999999999997300 ) ; +#4914 = CARTESIAN_POINT ( 'NONE', ( 9.797993715448322800, -30.88955008146884000, 26.19114966080531600 ) ) ; +#4915 = CARTESIAN_POINT ( 'NONE', ( 11.53762471195502900, -15.91509488073617200, -25.18545224904882200 ) ) ; +#4916 = AXIS2_PLACEMENT_3D ( 'NONE', #3564, #6613, #1502 ) ; +#4917 = CARTESIAN_POINT ( 'NONE', ( 41.15537051365254200, -11.23571604708998500, -22.46755997374652500 ) ) ; +#4918 = CARTESIAN_POINT ( 'NONE', ( 35.16976522323365400, -94.72976632545655200, 16.45206955037833700 ) ) ; +#4919 = CARTESIAN_POINT ( 'NONE', ( 5.975500942743720700, -30.53298977479950700, 21.53184212105276900 ) ) ; +#4920 = CARTESIAN_POINT ( 'NONE', ( 37.76958923178520400, -30.02459183119178500, 24.60836700807625400 ) ) ; +#4921 = CARTESIAN_POINT ( 'NONE', ( 32.08881583025509300, -10.43182329220726400, -25.07614209731448800 ) ) ; +#4922 = EDGE_CURVE ( 'NONE', #7779, #8895, #884, .T. ) ; +#4923 = CARTESIAN_POINT ( 'NONE', ( 34.15835898367255700, -30.78786482191855000, 26.80973637897873700 ) ) ; +#4924 = CARTESIAN_POINT ( 'NONE', ( 38.94931178141813900, -28.87043262030299200, 21.75755471858347400 ) ) ; +#4925 = VECTOR ( 'NONE', #2668, 1000.000000000000000 ) ; +#4926 = CARTESIAN_POINT ( 'NONE', ( 6.174680815656898900, -8.115708828547658600, 25.00000000000000400 ) ) ; +#4927 = EDGE_LOOP ( 'NONE', ( #7741, #7766, #7905, #7933 ) ) ; +#4928 = CARTESIAN_POINT ( 'NONE', ( 8.108811973569180200, -30.53789090781070200, 25.20346651503594900 ) ) ; +#4929 = CARTESIAN_POINT ( 'NONE', ( 15.36047906009657800, -14.37244254612890300, -25.77097959248011000 ) ) ; +#4930 = CARTESIAN_POINT ( 'NONE', ( 42.56546163104468400, 12.00000000000000000, -22.82730815522424100 ) ) ; +#4931 = CARTESIAN_POINT ( 'NONE', ( 39.42073923933730800, -29.84275346584064100, 22.70149734431858900 ) ) ; +#4932 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000001400, -94.74682992296695300, 18.71443453778785600 ) ) ; +#4933 = CARTESIAN_POINT ( 'NONE', ( 36.09255409283845500, -30.92303860351239900, 25.55054812499366800 ) ) ; +#4934 = EDGE_CURVE ( 'NONE', #3589, #3580, #11707, .T. ) ; +#4935 = CARTESIAN_POINT ( 'NONE', ( 37.08561233734554500, -18.00830800330718500, -22.59053054348714800 ) ) ; +#4936 = EDGE_CURVE ( 'NONE', #3705, #6002, #3229, .T. ) ; +#4937 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -95.07596123493894400, 11.50239124669685300 ) ) ; +#4938 = CARTESIAN_POINT ( 'NONE', ( 0.5278685303132660800, -11.05573706062646100, 8.005331014626776200 ) ) ; +#4939 = CARTESIAN_POINT ( 'NONE', ( 21.65263981266145500, -7.688433297844046200, -32.82212121724191400 ) ) ; +#4940 = ADVANCED_FACE ( 'NONE', ( #5612 ), #8037, .F. ) ; +#4941 = CARTESIAN_POINT ( 'NONE', ( 6.421972793538204300, -30.13924558364174900, 23.75269640641969500 ) ) ; +#4942 = CYLINDRICAL_SURFACE ( 'NONE', #9105, 3.189999999999995100 ) ; +#4943 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -90.07596123493894400, 15.95758058754439400 ) ) ; +#4944 = CARTESIAN_POINT ( 'NONE', ( 32.05517223596516600, -30.71344984299923600, 27.69781127241572700 ) ) ; +#4945 = CARTESIAN_POINT ( 'NONE', ( 34.73942355647749700, -12.19623197613948700, 24.38134862614391800 ) ) ; +#4946 = CARTESIAN_POINT ( 'NONE', ( 11.44986672906888500, -30.30980834205111300, 27.13310921829069900 ) ) ; +#4947 = CARTESIAN_POINT ( 'NONE', ( 5.294878720776193100, -19.82868803989402600, 11.04083707059347200 ) ) ; +#4948 = CARTESIAN_POINT ( 'NONE', ( 44.00941249301737200, -7.998837704781421600, -20.53757729045597500 ) ) ; +#4949 = CARTESIAN_POINT ( 'NONE', ( 32.92338368585072300, -10.42408003921442400, -25.05267441235057600 ) ) ; +#4950 = CARTESIAN_POINT ( 'NONE', ( 32.25896620961732700, -30.92273721119359200, 27.58369889418217700 ) ) ; +#4951 = VERTEX_POINT ( 'NONE', #11846 ) ; +#4952 = CARTESIAN_POINT ( 'NONE', ( 6.131151151218460900, -32.97668935711077200, 11.58703871389290400 ) ) ; +#4953 = CARTESIAN_POINT ( 'NONE', ( 21.72906418563062700, -31.32859326669796500, 28.73919354652434400 ) ) ; +#4954 = CARTESIAN_POINT ( 'NONE', ( 3.951592987442618600, -17.89778370145042500, -11.40307484499416000 ) ) ; +#4955 = CARTESIAN_POINT ( 'NONE', ( 13.66314375949845500, -30.82256624817486200, 27.90858364704586200 ) ) ; +#4956 = CARTESIAN_POINT ( 'NONE', ( 9.797996903400303400, -30.16998722656734000, 26.31804212788832900 ) ) ; +#4957 = FACE_OUTER_BOUND ( 'NONE', #2347, .T. ) ; +#4958 = CARTESIAN_POINT ( 'NONE', ( 5.043751184026471700, -28.37452017564010700, 12.97139639416310800 ) ) ; +#4959 = CARTESIAN_POINT ( 'NONE', ( 31.08817408775638900, -93.16207229036327000, 22.15580643127606900 ) ) ; +#4960 = CARTESIAN_POINT ( 'NONE', ( 5.067435703888007100, -29.49999703447918300, 21.71459524044342300 ) ) ; +#4961 = CARTESIAN_POINT ( 'NONE', ( 37.48626697040425900, -30.95421061360321200, 24.17043917649735700 ) ) ; +#4962 = DIRECTION ( 'NONE', ( 3.551631410960778700E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4963 = CARTESIAN_POINT ( 'NONE', ( 34.03046331436987500, -30.17321032275631900, 26.90191225195463100 ) ) ; +#4964 = ADVANCED_FACE ( 'NONE', ( #1188 ), #2587, .F. ) ; +#4965 = CARTESIAN_POINT ( 'NONE', ( 0.3424073531483012900, -10.68481382709207100, 8.005527445331386700 ) ) ; +#4966 = CARTESIAN_POINT ( 'NONE', ( 46.09574335854645700, -7.821814132597508800, 9.475141231661647000 ) ) ; +#4967 = CARTESIAN_POINT ( 'NONE', ( 8.284145146698298500, -29.59748640441050700, 25.15758636053204000 ) ) ; +#4968 = CARTESIAN_POINT ( 'NONE', ( 4.997849683715746700, -17.23620703854673400, -18.67024775154650100 ) ) ; +#4969 = CARTESIAN_POINT ( 'NONE', ( 24.85476337355883900, -30.65997555879721000, 28.85708888820669300 ) ) ; +#4970 = CARTESIAN_POINT ( 'NONE', ( 40.16036814269767100, -30.33990989768570000, 22.98912240559395000 ) ) ; +#4971 = AXIS2_PLACEMENT_3D ( 'NONE', #11294, #5173, #12273 ) ; +#4972 = CARTESIAN_POINT ( 'NONE', ( 38.54805953735834100, -30.79448618158511800, 22.48876671994431200 ) ) ; +#4973 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #9371, #8539, #2399 ), + ( #9546, #3418, #10553 ), + ( #4429, #11577, #5469 ), + ( #12543, #6506, #444 ), + ( #7557, #1446, #8583 ), + ( #2433, #9587, #3460 ), + ( #10594, #4469, #11618 ), + ( #5513, #12579, #6547 ), + ( #489, #7595, #1484 ), + ( #8626, #2482, #9627 ), + ( #3502, #10634, #4507 ), + ( #11658, #5558, #12619 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.002568775134038781500, 0.005137550268077563000, 0.006421937835096954200, 0.007706325402116344500, 0.01027510053615512600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7936335741122168000, 1.000000000000000000), + ( 1.000000000000000000, 0.7934555248168108100, 1.000000000000000000), + ( 1.000000000000000000, 0.7932254709153622200, 1.000000000000000000), + ( 1.000000000000000000, 0.7926571772222620300, 1.000000000000000000), + ( 1.000000000000000000, 0.7923144877532258800, 1.000000000000000000), + ( 1.000000000000000000, 0.7916521718880964500, 1.000000000000000000), + ( 1.000000000000000000, 0.7914139264537046700, 1.000000000000000000), + ( 1.000000000000000000, 0.7908262841320451400, 1.000000000000000000), + ( 1.000000000000000000, 0.7904709048293103700, 1.000000000000000000), + ( 1.000000000000000000, 0.7893234327468231500, 1.000000000000000000), + ( 1.000000000000000000, 0.7881732945571611200, 1.000000000000000000), + ( 1.000000000000000000, 0.7866036418274061600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4974 = VERTEX_POINT ( 'NONE', #2690 ) ; +#4975 = VERTEX_POINT ( 'NONE', #8823 ) ; +#4976 = LINE ( 'NONE', #11792, #9477 ) ; +#4977 = CARTESIAN_POINT ( 'NONE', ( 35.96156704388582900, -29.78444197330711800, 25.75243344377994200 ) ) ; +#4978 = CARTESIAN_POINT ( 'NONE', ( 25.10306456692114100, -19.87568216611861200, 23.25829123793066700 ) ) ; +#4979 = CARTESIAN_POINT ( 'NONE', ( 38.77270091857249000, -22.99490733433555100, -18.10091215996746100 ) ) ; +#4980 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -96.75656818788913000, 6.749276979338978000 ) ) ; +#4981 = CARTESIAN_POINT ( 'NONE', ( 0.1215735965355436600, -7.810182590543928600, -18.74565318504864600 ) ) ; +#4982 = CARTESIAN_POINT ( 'NONE', ( 6.980059178829647800, -29.11674312450415800, 23.61088890477236600 ) ) ; +#4983 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000595400, -9.951714357628986800, 9.047669628703086900 ) ) ; +#4984 = CARTESIAN_POINT ( 'NONE', ( 32.05517467877206900, -30.85074089978418100, 27.67360220618779100 ) ) ; +#4985 = CARTESIAN_POINT ( 'NONE', ( 11.53233017264493100, -30.83063437794339000, 27.12331130775302400 ) ) ; +#4986 = ORIENTED_EDGE ( 'NONE', *, *, #5630, .F. ) ; +#4987 = CARTESIAN_POINT ( 'NONE', ( 5.073065363794586200, -19.91440799845925700, 9.521964316278735300 ) ) ; +#4988 = CARTESIAN_POINT ( 'NONE', ( 2.501097020554920100, -9.240536455385907300, -23.55289141356945500 ) ) ; +#4989 = CARTESIAN_POINT ( 'NONE', ( 33.80388090426723100, -10.62821487087821200, -24.99999999999688400 ) ) ; +#4990 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -27.09143239524033600, 6.754920151478383000 ) ) ; +#4991 = CARTESIAN_POINT ( 'NONE', ( 9.915198718908856200, -12.33664350185094900, 24.08452338645616900 ) ) ; +#4992 = CARTESIAN_POINT ( 'NONE', ( 5.005068981652255100, -22.32621058451303900, -11.54599965802344900 ) ) ; +#4993 = CARTESIAN_POINT ( 'NONE', ( 13.66273932762195100, -30.80737352383587800, 27.91114470778288500 ) ) ; +#4994 = EDGE_CURVE ( 'NONE', #7792, #6002, #10711, .T. ) ; +#4995 = CARTESIAN_POINT ( 'NONE', ( 10.02987758266408000, -31.10589084526297700, 26.18875500396871600 ) ) ; +#4996 = CARTESIAN_POINT ( 'NONE', ( 2.493104772759132000, -9.331640426828821300, 20.92843345000928000 ) ) ; +#4997 = CARTESIAN_POINT ( 'NONE', ( 36.65617149004636100, -18.01237507300886900, -23.06837513076495600 ) ) ; +#4998 = CARTESIAN_POINT ( 'NONE', ( 26.19159489663238100, -97.51638471107510500, 22.06850012137626000 ) ) ; +#4999 = ORIENTED_EDGE ( 'NONE', *, *, #8537, .T. ) ; +#5000 = CARTESIAN_POINT ( 'NONE', ( 6.073349384952774900, -30.58061852351529500, 21.58594518583720800 ) ) ; +#5001 = AXIS2_PLACEMENT_3D ( 'NONE', #1369, #8505, #2367 ) ; +#5002 = CARTESIAN_POINT ( 'NONE', ( 37.28956638478456400, -29.66424070734811400, 24.79290052273697500 ) ) ; +#5003 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1562, #2559, #12654, #11687, #4544, #5586, #10665, #3532, #9659, #2516 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002754032386060595400, 0.005508064772121181200, 0.008262097158181765800, 0.01101612954424235200 ), + .UNSPECIFIED. ) ; +#5004 = ORIENTED_EDGE ( 'NONE', *, *, #5195, .T. ) ; +#5005 = CARTESIAN_POINT ( 'NONE', ( 24.95910818622250100, -30.66221337616249800, 28.85669430062729600 ) ) ; +#5006 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1662, #660, #3680, #10810, #4697, #11825, #5738, #12783, #6776, #699, #7819, #1703, #8838, #2709, #9844, #3713, #10853, #4743, #11865, #5775, #12824, #6824, #741, #7861, #1748, #8880, #2750, #9885, #3757, #10893, #4788, #11907, #5821, #12866, #6869, #786, #7904, #1786, #8927, #2795, #9927, #3801, #10942, #4829, #11949, #5867, #12903, #6908, #828, #7952, #1827, #8966, #2843, #9972, #3844, #10989, #4876, #11986, #5906, #12939, #6956, #866, #7997, #1876, #9009, #2888, #10021, #3891, #11031, #4924 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 1, 1, 2, 2, 2, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 1, 2, 2, 2, 2, 2, 1, 1, 1, 1, 2, 2, 2, 2, 1, 1, 1, 2, 2, 2, 1, 1, 1, 1, 2, 2, 4 ), + ( 0.0000000000000000000, 0.06249999999996340400, 0.09374999999994487700, 0.1093749999999355900, 0.1171874999999317800, 0.1249999999999279500, 0.1874999999998945300, 0.2187499999998777400, 0.2343749999998693500, 0.2421874999998645000, 0.2460937499998617500, 0.2480468749998605000, 0.2499999999998592800, 0.3749999999997639700, 0.4374999999997163900, 0.4687499999996925800, 0.4843749999996817000, 0.4921874999996766500, 0.4960937499996747000, 0.4999999999996727600, 0.6249999999996458400, 0.6874999999996322900, 0.7187499999996251900, 0.7343749999996221900, 0.7421874999996219700, 0.7460937499996217500, 0.7480468749996230800, 0.7490234374996231900, 0.7499999999996231900, 0.8124999999996764800, 0.8437499999997033500, 0.8593749999997163400, 0.8671874999997227800, 0.8710937499997265500, 0.8730468749997291100, 0.8749999999997315500, 0.9062499999997830600, 0.9218749999998089300, 0.9296874999998214800, 0.9335937499998281400, 0.9355468749998320200, 0.9365234374998339100, 0.9374999999998358000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#5007 = ADVANCED_FACE ( 'NONE', ( #10408 ), #9373, .F. ) ; +#5008 = CARTESIAN_POINT ( 'NONE', ( 34.06426714442268600, -30.66118166204496400, 26.88844247480812700 ) ) ; +#5009 = CARTESIAN_POINT ( 'NONE', ( 30.35979486092603400, -28.66209327216502700, 28.53704757350146400 ) ) ; +#5010 = ORIENTED_EDGE ( 'NONE', *, *, #287, .F. ) ; +#5011 = CARTESIAN_POINT ( 'NONE', ( 0.2097409522639236400, -10.30380191866692200, 8.005615260811460100 ) ) ; +#5012 = CARTESIAN_POINT ( 'NONE', ( 45.94566086056891400, -7.834888278374363000, 10.94487753734520100 ) ) ; +#5013 = ORIENTED_EDGE ( 'NONE', *, *, #12266, .T. ) ; +#5014 = ORIENTED_EDGE ( 'NONE', *, *, #7529, .F. ) ; +#5015 = CARTESIAN_POINT ( 'NONE', ( 8.387825177519893300, -30.90087561283479900, 25.15110218373777700 ) ) ; +#5016 = CARTESIAN_POINT ( 'NONE', ( 46.15261950344260800, -7.694760993114730500, -11.53187062879840100 ) ) ; +#5017 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -8.819821883570053700, 7.964200322661407800 ) ) ; +#5018 = CARTESIAN_POINT ( 'NONE', ( 29.34752224758852900, -28.08124121815427900, 26.96588792517640000 ) ) ; +#5019 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -99.99999999999998600, 6.630571736238761300 ) ) ; +#5020 = EDGE_CURVE ( 'NONE', #275, #11270, #8359, .T. ) ; +#5021 = ORIENTED_EDGE ( 'NONE', *, *, #593, .F. ) ; +#5022 = CARTESIAN_POINT ( 'NONE', ( 38.91374016573154600, -29.59096624295554200, 23.20577711308842700 ) ) ; +#5023 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.819631228893783300, 8.005330848018788400 ) ) ; +#5024 = VERTEX_POINT ( 'NONE', #8907 ) ; +#5025 = CARTESIAN_POINT ( 'NONE', ( 36.06885837466581500, -30.60845332318722000, 25.76370461384610500 ) ) ; +#5026 = CARTESIAN_POINT ( 'NONE', ( 26.45802601515790500, -28.02249789462443600, 27.50536073506683400 ) ) ; +#5027 = CARTESIAN_POINT ( 'NONE', ( 39.40980755800734400, -20.23311170087770000, -15.86219784201798100 ) ) ; +#5028 = ORIENTED_EDGE ( 'NONE', *, *, #7710, .T. ) ; +#5029 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999494100, -94.55768749320789400, 4.933039381730957000 ) ) ; +#5030 = CARTESIAN_POINT ( 'NONE', ( 0.03859644655561404700, -9.550230708694289900, 8.005601521749023100 ) ) ; +#5031 = CARTESIAN_POINT ( 'NONE', ( 7.433279160931944000, -10.00000000000000000, -27.39225757640757700 ) ) ; +#5032 = CARTESIAN_POINT ( 'NONE', ( 6.598710921226441400, -30.45272751203087200, 23.75881714667632800 ) ) ; +#5033 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999996400, -8.765021585841813200, 8.905007418668752500 ) ) ; +#5034 = CARTESIAN_POINT ( 'NONE', ( 31.74840912284135200, -30.72986556437473700, 27.79582208933840800 ) ) ; +#5035 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5036 = CARTESIAN_POINT ( 'NONE', ( 11.53734387459615400, -30.45580983615012000, 27.17792574643606700 ) ) ; +#5037 = EDGE_CURVE ( 'NONE', #5340, #4031, #7003, .T. ) ; +#5038 = CARTESIAN_POINT ( 'NONE', ( 37.49999998962729100, -95.07596123493894400, 12.92969265702213700 ) ) ; +#5039 = CARTESIAN_POINT ( 'NONE', ( 10.55026754490384300, -12.50000000000001100, -18.58438495887037300 ) ) ; +#5040 = ORIENTED_EDGE ( 'NONE', *, *, #11642, .F. ) ; +#5041 = VERTEX_POINT ( 'NONE', #894 ) ; +#5042 = CARTESIAN_POINT ( 'NONE', ( 6.262229683212004800, -9.845400183572154500, 27.79360564356088000 ) ) ; +#5043 = CARTESIAN_POINT ( 'NONE', ( 39.97322147315763600, -27.83174359021458200, 11.77855052488386400 ) ) ; +#5044 = EDGE_LOOP ( 'NONE', ( #9356, #1393, #2164 ) ) ; +#5045 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344969800, 27.93780948130441300 ) ) ; +#5046 = CARTESIAN_POINT ( 'NONE', ( 44.47213146979886700, -11.05573706040219900, 8.005331014629273800 ) ) ; +#5047 = CARTESIAN_POINT ( 'NONE', ( 9.959120646857213500, -30.45520859753282700, 26.42596436060182800 ) ) ; +#5048 = CARTESIAN_POINT ( 'NONE', ( 33.32552960762708900, -15.89296508247425900, -20.00000000000006000 ) ) ; +#5049 = CARTESIAN_POINT ( 'NONE', ( 38.31661698176510100, -7.412293995505708100, -24.99999999999997500 ) ) ; +#5050 = CARTESIAN_POINT ( 'NONE', ( 44.09157152587820900, -7.873854980443966600, 18.11134077736178600 ) ) ; +#5051 = CARTESIAN_POINT ( 'NONE', ( 5.024244279567878600, -29.85061071413225500, 21.71617641284585800 ) ) ; +#5052 = CARTESIAN_POINT ( 'NONE', ( 37.38447597485917100, -30.65214829512126800, 24.71862483422867400 ) ) ; +#5053 = ORIENTED_EDGE ( 'NONE', *, *, #9458, .F. ) ; +#5054 = CARTESIAN_POINT ( 'NONE', ( 23.28598449854153100, -33.38452916951375500, 26.50167657627661600 ) ) ; +#5055 = VECTOR ( 'NONE', #5763, 1000.000000000000000 ) ; +#5056 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11665, #4516, #1533, #8674 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#5057 = ORIENTED_EDGE ( 'NONE', *, *, #10911, .T. ) ; +#5058 = FACE_OUTER_BOUND ( 'NONE', #1120, .T. ) ; +#5059 = CARTESIAN_POINT ( 'NONE', ( 34.03037401653887200, -31.08679246475330200, 26.74063635480720400 ) ) ; +#5060 = CARTESIAN_POINT ( 'NONE', ( 32.59775028999341400, -20.34202322626620300, 21.10820805528758400 ) ) ; +#5061 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.819631228893783300, 8.005330848018788400 ) ) ; +#5062 = CARTESIAN_POINT ( 'NONE', ( 6.712006322907203800, -7.463541018600208700, -24.99999999999999600 ) ) ; +#5063 = CARTESIAN_POINT ( 'NONE', ( 8.327144186248919100, -30.01419265483794200, 25.38428291891495500 ) ) ; +#5064 = CARTESIAN_POINT ( 'NONE', ( 9.908105657620717800, -10.96180074361880800, 24.83040857883454700 ) ) ; +#5065 = CARTESIAN_POINT ( 'NONE', ( 0.5281232885195905600, -11.05590735952746000, 8.059409717080519900 ) ) ; +#5066 = CARTESIAN_POINT ( 'NONE', ( 44.47241463013982400, -11.05530812312570700, -11.60163007128675600 ) ) ; +#5067 = CARTESIAN_POINT ( 'NONE', ( 38.53751480575081000, -30.78114171048128600, 21.81520739464773900 ) ) ; +#5068 = CARTESIAN_POINT ( 'NONE', ( 38.53268267837351900, -30.73465671612691000, 22.92151437753373600 ) ) ; +#5069 = FACE_OUTER_BOUND ( 'NONE', #11493, .T. ) ; +#5070 = EDGE_LOOP ( 'NONE', ( #2465, #8713, #8741 ) ) ; +#5071 = CARTESIAN_POINT ( 'NONE', ( 35.74972006171413600, -29.69931542510742500, 25.84110739659323000 ) ) ; +#5072 = CARTESIAN_POINT ( 'NONE', ( 41.00538171290417500, -17.91629500542707700, -13.08035012351448900 ) ) ; +#5073 = CARTESIAN_POINT ( 'NONE', ( 39.91265628358179600, -91.27442453181525700, -1.521502677800330200 ) ) ; +#5074 = CARTESIAN_POINT ( 'NONE', ( 7.819399103813657000, -9.445798436357881300, -24.99999999999999600 ) ) ; +#5075 = CARTESIAN_POINT ( 'NONE', ( 17.06832700498237200, -20.85358462620007800, -26.65666754469009100 ) ) ; +#5076 = ADVANCED_FACE ( 'NONE', ( #5289 ), #10080, .F. ) ; +#5077 = CARTESIAN_POINT ( 'NONE', ( 6.874952238620484700, -29.32291912927031400, 23.77689179703196100 ) ) ; +#5078 = CARTESIAN_POINT ( 'NONE', ( 44.46365511790354200, -11.02906204126952100, 8.929518433039541800 ) ) ; +#5079 = CARTESIAN_POINT ( 'NONE', ( 31.74731949188935700, -30.81190265030959800, 27.78313444911144700 ) ) ; +#5080 = CARTESIAN_POINT ( 'NONE', ( 34.49407894617425500, -16.63655602679789800, -24.80432773142106100 ) ) ; +#5081 = CARTESIAN_POINT ( 'NONE', ( 11.73945135591318600, -30.96811021004620200, 27.16653003347699500 ) ) ; +#5082 = FACE_OUTER_BOUND ( 'NONE', #4494, .T. ) ; +#5083 = CARTESIAN_POINT ( 'NONE', ( 31.30103478435171400, -100.0000000000000100, -36.66518970606523500 ) ) ; +#5084 = CARTESIAN_POINT ( 'NONE', ( 8.855471091572194800, -11.50123081921612600, 24.09096385551682200 ) ) ; +#5085 = CARTESIAN_POINT ( 'NONE', ( 9.506271397901397100, -12.45743782775353400, 23.73587515475239900 ) ) ; +#5086 = CARTESIAN_POINT ( 'NONE', ( 4.995078258642958100, -19.98907765525389000, -11.52386382458902500 ) ) ; +#5087 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344970900, 27.93780948130441300 ) ) ; +#5088 = CARTESIAN_POINT ( 'NONE', ( 40.88840954836246800, -18.22318090327497200, -11.20648087959948900 ) ) ; +#5089 = CARTESIAN_POINT ( 'NONE', ( 44.97167428080927500, 9.894175532731912500, 1.388698443143500100 ) ) ; +#5090 = CARTESIAN_POINT ( 'NONE', ( 10.40565021204227800, -31.12841248613045400, 26.40297982068992200 ) ) ; +#5091 = CARTESIAN_POINT ( 'NONE', ( 36.85586862908942200, -100.0000000000000300, -2.045551259989166800 ) ) ; +#5092 = CARTESIAN_POINT ( 'NONE', ( 0.8450799996949998100, -8.389711229384600300, -19.69998625431978200 ) ) ; +#5093 = CARTESIAN_POINT ( 'NONE', ( 42.81591945580159800, -10.04764002968963500, 17.18083247445271400 ) ) ; +#5094 = LINE ( 'NONE', #8160, #7531 ) ; +#5095 = CARTESIAN_POINT ( 'NONE', ( 6.041992260893157300, -28.89731146421541300, 21.88281511820555600 ) ) ; +#5096 = CARTESIAN_POINT ( 'NONE', ( 36.97476786429503200, -29.39860618240012600, 24.82214392277121800 ) ) ; +#5097 = ORIENTED_EDGE ( 'NONE', *, *, #11394, .F. ) ; +#5098 = EDGE_CURVE ( 'NONE', #3705, #4698, #12715, .T. ) ; +#5099 = FACE_OUTER_BOUND ( 'NONE', #2774, .T. ) ; +#5100 = CARTESIAN_POINT ( 'NONE', ( 33.86585580992581200, -30.57075154566276600, 26.99484272350354500 ) ) ; +#5101 = CARTESIAN_POINT ( 'NONE', ( 33.32928431690401500, -27.08701646028593400, 19.47633101244442600 ) ) ; +#5102 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #7321, #8292, ( #3724 ) ) ; +#5103 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000005300, -12.49999999999998400, -10.20941827348498200 ) ) ; +#5104 = CARTESIAN_POINT ( 'NONE', ( 8.741815534038600800, -31.14525445181496700, 25.18231310182545700 ) ) ; +#5105 = CARTESIAN_POINT ( 'NONE', ( 41.39120715098013600, -7.567504176423995900, -25.16587366121733600 ) ) ; +#5106 = CARTESIAN_POINT ( 'NONE', ( 8.325743806346717700E-014, -9.994127836271626800, 8.384365557250454500 ) ) ; +#5107 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000164800, -9.989433494492416800, -12.00898840598859100 ) ) ; +#5108 = CARTESIAN_POINT ( 'NONE', ( 35.36732653062124100, -30.07246844770096000, 26.41540225880266800 ) ) ; +#5109 = CARTESIAN_POINT ( 'NONE', ( 38.40031209633199400, -29.23893594923347500, 23.39535503997364800 ) ) ; +#5110 = LINE ( 'NONE', #9462, #9905 ) ; +#5111 = CARTESIAN_POINT ( 'NONE', ( 20.18719255689187600, -31.29913968154957600, 28.74438700826459600 ) ) ; +#5112 = AXIS2_PLACEMENT_3D ( 'NONE', #7816, #1701, #8836 ) ; +#5113 = CARTESIAN_POINT ( 'NONE', ( 35.89494069226152100, -30.43966586907407300, 25.92835577372789000 ) ) ; +#5114 = CARTESIAN_POINT ( 'NONE', ( 11.30188424255266200, -13.07477915040260000, -25.13921644789084600 ) ) ; +#5115 = CARTESIAN_POINT ( 'NONE', ( 39.99679370006018800, -22.33460798992934900, -11.62810443538903500 ) ) ; +#5116 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -10.00000000000000000, -24.99999999999999600 ) ) ; +#5117 = CARTESIAN_POINT ( 'NONE', ( 4.999919635099584700, -20.05966795021112900, -12.58913619056222400 ) ) ; +#5118 = CARTESIAN_POINT ( 'NONE', ( 7.016888797071893600, -30.83994747610730900, 23.69806002766141600 ) ) ; +#5119 = CARTESIAN_POINT ( 'NONE', ( 27.40567159055760600, -97.51411890013972100, 21.98952921255729400 ) ) ; +#5120 = CARTESIAN_POINT ( 'NONE', ( 31.64591651950199500, -30.74576890110360600, 27.82619830948756600 ) ) ; +#5121 = CARTESIAN_POINT ( 'NONE', ( 0.4005458202318101800, -6.977561476622396300, 17.50093980820233200 ) ) ; +#5122 = CARTESIAN_POINT ( 'NONE', ( 11.72898627722741700, -30.63838144366771100, 27.24899318229861200 ) ) ; +#5123 = CYLINDRICAL_SURFACE ( 'NONE', #5729, 3.189999999999995100 ) ; +#5124 = CARTESIAN_POINT ( 'NONE', ( 37.18345617790463800, -100.0000000000000100, -28.51501817793795700 ) ) ; +#5125 = CARTESIAN_POINT ( 'NONE', ( 32.31798496324476800, -14.69115024050283900, 24.17282364204238800 ) ) ; +#5126 = CARTESIAN_POINT ( 'NONE', ( 3.950510372631473200, -17.89874043832252700, -11.47749324262165500 ) ) ; +#5127 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5128 = CARTESIAN_POINT ( 'NONE', ( 10.34598983711687100, -30.63866394207721200, 26.60157681519844900 ) ) ; +#5129 = CARTESIAN_POINT ( 'NONE', ( 34.16939331951962800, -12.50000000000001100, 17.99030964499842300 ) ) ; +#5130 = CARTESIAN_POINT ( 'NONE', ( 2.174562844084802400, -9.210957287732519200, -21.59745799401700600 ) ) ; +#5131 = CARTESIAN_POINT ( 'NONE', ( 41.71048428288040100, -9.840936378287134200, 19.35026901815966500 ) ) ; +#5132 = CARTESIAN_POINT ( 'NONE', ( 5.358998672452060000, -30.23079553842620400, 21.76056621746599300 ) ) ; +#5133 = VECTOR ( 'NONE', #1929, 1000.000000000000000 ) ; +#5134 = CARTESIAN_POINT ( 'NONE', ( 30.25400913265074000, -9.999999999999996400, 27.65021518371796500 ) ) ; +#5135 = CARTESIAN_POINT ( 'NONE', ( 37.27558185522659800, -30.38848731704345600, 24.97973163057994100 ) ) ; +#5136 = CARTESIAN_POINT ( 'NONE', ( 5.002455040276601000, -27.32450473871317700, 8.323065577679923200 ) ) ; +#5137 = ADVANCED_FACE ( 'NONE', ( #4638 ), #4588, .F. ) ; +#5138 = CARTESIAN_POINT ( 'NONE', ( 33.84678388154112800, -31.00725886841085500, 26.87573040148948800 ) ) ; +#5139 = CARTESIAN_POINT ( 'NONE', ( 38.85855019948345300, -28.87712604289202300, 22.01586585697920400 ) ) ; +#5140 = ORIENTED_EDGE ( 'NONE', *, *, #5784, .F. ) ; +#5141 = ORIENTED_EDGE ( 'NONE', *, *, #2885, .T. ) ; +#5142 = CARTESIAN_POINT ( 'NONE', ( 1.448426339804853100E-016, -9.177680058845386000, 8.005500161077620200 ) ) ; +#5143 = CARTESIAN_POINT ( 'NONE', ( 8.559141111135462100, -30.33658405415667000, 25.57262341400491600 ) ) ; +#5144 = CIRCLE ( 'NONE', #6700, 1.200000000000003100 ) ; +#5145 = CARTESIAN_POINT ( 'NONE', ( 45.91396964207189800, -7.847188407628496300, -14.46709690233743800 ) ) ; +#5146 = CARTESIAN_POINT ( 'NONE', ( 2.602085213965210600E-015, -8.683065088953769700, 9.474682577023378000 ) ) ; +#5147 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000700, -8.626232958493320200, -13.34825163165115400 ) ) ; +#5148 = CARTESIAN_POINT ( 'NONE', ( 30.52396813878133500, -32.82716107138759300, 27.82377560190972700 ) ) ; +#5149 = EDGE_CURVE ( 'NONE', #8459, #11729, #2254, .T. ) ; +#5150 = CARTESIAN_POINT ( 'NONE', ( 38.74051778720138400, -30.39857223667346600, 23.30935739131100300 ) ) ; +#5151 = VERTEX_POINT ( 'NONE', #12053 ) ; +#5152 = CARTESIAN_POINT ( 'NONE', ( 35.75010961953912400, -31.16763625306312600, 25.58279442376192500 ) ) ; +#5153 = CARTESIAN_POINT ( 'NONE', ( 11.53366668755543500, -10.78327554705517100, -25.05093632618212100 ) ) ; +#5154 = CARTESIAN_POINT ( 'NONE', ( 40.00510493534741100, -19.99081187067420400, -11.55940715941765300 ) ) ; +#5155 = ORIENTED_EDGE ( 'NONE', *, *, #2725, .T. ) ; +#5156 = CARTESIAN_POINT ( 'NONE', ( 10.11423849738465600, -13.36407974370885700, -25.00000000000002800 ) ) ; +#5157 = CARTESIAN_POINT ( 'NONE', ( 34.49637450203265100, -17.28588563368327900, -24.70326924561755500 ) ) ; +#5158 = CARTESIAN_POINT ( 'NONE', ( 6.764240977300914900, -29.79459309794535200, 24.08355606319987500 ) ) ; +#5159 = CARTESIAN_POINT ( 'NONE', ( 29.19034777193339300, -97.50821382426269700, 21.75299072418016500 ) ) ; +#5160 = CARTESIAN_POINT ( 'NONE', ( 31.64466200388780900, -30.80038280097620200, 27.81800273619020900 ) ) ; +#5161 = CARTESIAN_POINT ( 'NONE', ( 11.84214618751618900, -31.00981227548267300, 27.19457047896486300 ) ) ; +#5162 = CARTESIAN_POINT ( 'NONE', ( 29.81731862891175000, -17.10244342587310100, 23.74764759506316000 ) ) ; +#5163 = CARTESIAN_POINT ( 'NONE', ( 39.38139272317322100, -30.36162662067237500, 21.49461609791451600 ) ) ; +#5164 = ORIENTED_EDGE ( 'NONE', *, *, #8308, .F. ) ; +#5165 = ORIENTED_EDGE ( 'NONE', *, *, #12497, .T. ) ; +#5166 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#5167 = CARTESIAN_POINT ( 'NONE', ( 6.005396618289365700, -9.904824570262160700, 27.37672996471376100 ) ) ; +#5168 = CARTESIAN_POINT ( 'NONE', ( 5.004842036135487500, -22.32710130519287300, -11.55511795849622400 ) ) ; +#5169 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5111, #4953, #4708, #4682 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.004625614886216253300 ), + .UNSPECIFIED. ) ; +#5170 = ORIENTED_EDGE ( 'NONE', *, *, #2706, .F. ) ; +#5171 = CARTESIAN_POINT ( 'NONE', ( 2.228173855991162400, -10.10513473542794000, 17.20793616907297600 ) ) ; +#5172 = EDGE_CURVE ( 'NONE', #4218, #10945, #12996, .T. ) ; +#5173 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#5174 = CARTESIAN_POINT ( 'NONE', ( 10.40279195976300600, -30.03385606660004100, 26.60136409905973000 ) ) ; +#5175 = CARTESIAN_POINT ( 'NONE', ( 30.20916246864325700, -100.0000000000000300, 5.479840347243284200 ) ) ; +#5176 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, 1.200000000000012600 ) ) ; +#5177 = CARTESIAN_POINT ( 'NONE', ( 41.74495639731068800, -9.687298331169282400, 22.45815912818338600 ) ) ; +#5178 = VERTEX_POINT ( 'NONE', #4988 ) ; +#5179 = CARTESIAN_POINT ( 'NONE', ( 5.666483140869987200, -29.08953696470665000, 21.96256565912277000 ) ) ; +#5180 = CARTESIAN_POINT ( 'NONE', ( 38.28799367709280000, -7.463541018600210500, -24.99999999999999600 ) ) ; +#5181 = CARTESIAN_POINT ( 'NONE', ( 36.96155540128405200, -31.12208978011129500, 24.50327890113194900 ) ) ; +#5182 = ORIENTED_EDGE ( 'NONE', *, *, #12527, .F. ) ; +#5183 = DIRECTION ( 'NONE', ( 0.9998119278664175900, 0.01909889591383957100, 0.003367650651352428000 ) ) ; +#5184 = CARTESIAN_POINT ( 'NONE', ( 33.75714702235431700, -30.39752368533898200, 27.04897313290304000 ) ) ; +#5185 = CARTESIAN_POINT ( 'NONE', ( 37.98581890310513400, -22.23767346805190900, 15.24614660884442000 ) ) ; +#5186 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 7.000000000000000000, 1.200000000000005700 ) ) ; +#5187 = ORIENTED_EDGE ( 'NONE', *, *, #1560, .T. ) ; +#5188 = CARTESIAN_POINT ( 'NONE', ( 8.750585285044500900, -29.56201484874461000, 25.44944957908923700 ) ) ; +#5189 = CARTESIAN_POINT ( 'NONE', ( 8.496800709773298300, -95.07596123493894400, 4.623480266339889500 ) ) ; +#5190 = CARTESIAN_POINT ( 'NONE', ( 26.24522643245641600, -7.687750516303233400, -32.90106338041533700 ) ) ; +#5191 = EDGE_CURVE ( 'NONE', #10284, #8086, #10727, .T. ) ; +#5192 = CARTESIAN_POINT ( 'NONE', ( 0.6873602482933832700, -10.08219139709763300, 13.13356696898463100 ) ) ; +#5193 = CARTESIAN_POINT ( 'NONE', ( 44.28835261642790000, -9.499276210411203200, -17.82558790261778700 ) ) ; +#5194 = CARTESIAN_POINT ( 'NONE', ( 25.69816208612967000, -33.33529085974920700, 26.50809844975701100 ) ) ; +#5195 = EDGE_CURVE ( 'NONE', #6002, #7387, #7719, .T. ) ; +#5196 = ORIENTED_EDGE ( 'NONE', *, *, #11890, .F. ) ; +#5197 = CARTESIAN_POINT ( 'NONE', ( 38.01969253544264400, -29.11668369695529900, 23.61113257993704900 ) ) ; +#5198 = CARTESIAN_POINT ( 'NONE', ( 35.78522630356565800, -30.23978796467852000, 25.99728950895744700 ) ) ; +#5199 = CARTESIAN_POINT ( 'NONE', ( 10.50592105382547800, -16.63655602679402500, -24.80432773142155900 ) ) ; +#5200 = ORIENTED_EDGE ( 'NONE', *, *, #12859, .F. ) ; +#5201 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5202 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#5203 = CARTESIAN_POINT ( 'NONE', ( 38.74311286946823400, -100.0000000000000000, 17.91938285900863200 ) ) ; +#5204 = CARTESIAN_POINT ( 'NONE', ( 34.81901878800214700, -20.13661103337675900, -23.85198785229073700 ) ) ; +#5205 = ADVANCED_FACE ( 'NONE', ( #12424 ), #2899, .F. ) ; +#5206 = VERTEX_POINT ( 'NONE', #10736 ) ; +#5207 = CARTESIAN_POINT ( 'NONE', ( 7.244590511453005800, -31.00980704963392400, 23.62663411532589600 ) ) ; +#5208 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000200400, -9.970988691367216100, 8.827822528567455900 ) ) ; +#5209 = CARTESIAN_POINT ( 'NONE', ( 31.64586075361040000, -30.86281047632671100, 27.80563514647855400 ) ) ; +#5210 = CARTESIAN_POINT ( 'NONE', ( 40.86163949413058600, -7.346822827176008100, 25.00000000000000000 ) ) ; +#5211 = CARTESIAN_POINT ( 'NONE', ( 11.82842457739519100, -30.72291220914362600, 27.27755914388141200 ) ) ; +#5212 = CARTESIAN_POINT ( 'NONE', ( 26.80673071432649500, -18.83558487930677900, 23.44204799543852900 ) ) ; +#5213 = CARTESIAN_POINT ( 'NONE', ( 39.13253816791369400, -28.95605054894871700, 21.81039040573238500 ) ) ; +#5214 = CARTESIAN_POINT ( 'NONE', ( 8.886995996147190300, -12.57765825713762800, 23.20548594696926200 ) ) ; +#5215 = CARTESIAN_POINT ( 'NONE', ( 39.90493322772859100, -28.26585382249663400, 14.92142141615362000 ) ) ; +#5216 = CARTESIAN_POINT ( 'NONE', ( 44.43531721653959500, -10.87593098886749700, 10.26711049428110000 ) ) ; +#5217 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9586, #3417, #10593, #4468 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( -1.550951344993942900E-005, 0.0005479921383169726400 ), + .UNSPECIFIED. ) ; +#5218 = CARTESIAN_POINT ( 'NONE', ( 34.65279311671199000, -11.60110598540421200, -25.00000000000000000 ) ) ; +#5219 = FACE_OUTER_BOUND ( 'NONE', #3132, .T. ) ; +#5220 = CARTESIAN_POINT ( 'NONE', ( 10.55108462318382900, -30.81927000347937100, 26.65111998755772800 ) ) ; +#5221 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -30.66316004106086300, 28.85652737806402600 ) ) ; +#5222 = EDGE_LOOP ( 'NONE', ( #9402, #10341, #11469 ) ) ; +#5223 = CARTESIAN_POINT ( 'NONE', ( 40.81158274136404200, -11.36382980262965600, -22.85400179888196300 ) ) ; +#5224 = CARTESIAN_POINT ( 'NONE', ( 36.73692872015348600, -12.64718809329185800, 22.66839303731562800 ) ) ; +#5225 = CARTESIAN_POINT ( 'NONE', ( 5.928173182014225200, -30.54215418562286600, 21.76589555529142900 ) ) ; +#5226 = CARTESIAN_POINT ( 'NONE', ( 29.78306756327848600, -97.50579355475494500, 21.65447030009107400 ) ) ; +#5227 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -19.87270537885227400, 23.25917566912282600 ) ) ; +#5228 = CARTESIAN_POINT ( 'NONE', ( 36.89661276802282700, -30.20005378420359700, 25.26966178545655900 ) ) ; +#5229 = EDGE_CURVE ( 'NONE', #5245, #9952, #7076, .T. ) ; +#5230 = CARTESIAN_POINT ( 'NONE', ( 33.76392586631629200, -30.82914083808109900, 26.98797389606332700 ) ) ; +#5231 = CARTESIAN_POINT ( 'NONE', ( 39.28810697046464600, -26.26864665111275700, 11.72436332876698600 ) ) ; +#5232 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, 12.00000000000000000, -23.00000000000000000 ) ) ; +#5233 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -19.87270537885227400, 23.25917566912282200 ) ) ; +#5234 = CARTESIAN_POINT ( 'NONE', ( 8.656055233351105800, -30.55399358465406900, 25.59014518548867700 ) ) ; +#5235 = CARTESIAN_POINT ( 'NONE', ( 36.46096522641177300, -10.00000000000000000, -28.23356746606890200 ) ) ; +#5236 = CARTESIAN_POINT ( 'NONE', ( 3.792904911678938600E-012, -6.744569209946324600, 16.60405059354648600 ) ) ; +#5237 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999998600, -6.162798916656117700, -20.53615518146339600 ) ) ; +#5238 = DIRECTION ( 'NONE', ( -0.9997116207813339100, -0.02364923651029129900, -0.004169998469919351100 ) ) ; +#5239 = CARTESIAN_POINT ( 'NONE', ( 38.57783442503551900, -30.13922104223168200, 23.75298258588745500 ) ) ; +#5240 = CIRCLE ( 'NONE', #261, 5.000000000000000000 ) ; +#5241 = CARTESIAN_POINT ( 'NONE', ( 35.71480028665354200, -31.01584196254338400, 25.75349157680362200 ) ) ; +#5242 = CARTESIAN_POINT ( 'NONE', ( 18.94567791293662800, -97.51587327058025800, 22.05123229016744400 ) ) ; +#5243 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5260, #11381, #8382, #2257, #9399, #3273, #10405, #4282, #11429, #5308, #12397, #6347 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.003645773719968969600, 0.004992402094328816400, 0.006339030468688663200, 0.007685658843048510900, 0.008358973030228433000, 0.009032287217408355200 ), + .UNSPECIFIED. ) ; +#5244 = AXIS2_PLACEMENT_3D ( 'NONE', #12988, #10063, #11086 ) ; +#5245 = VERTEX_POINT ( 'NONE', #465 ) ; +#5246 = CARTESIAN_POINT ( 'NONE', ( 29.36686212562736400, -95.07596123493894400, 16.51084753338468800 ) ) ; +#5247 = CARTESIAN_POINT ( 'NONE', ( 11.35228933868426200, -13.41914980536907200, -25.15601430610437800 ) ) ; +#5248 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -39.52045731841470700, 19.79474689191102500 ) ) ; +#5249 = CARTESIAN_POINT ( 'NONE', ( 6.773921779442749100, -30.11785402301260800, 24.18515606977496500 ) ) ; +#5250 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000700, -8.785784128539512800, 8.713853180364006700 ) ) ; +#5251 = CARTESIAN_POINT ( 'NONE', ( 31.43953227991153200, -30.80426269190909500, 27.88089576545395300 ) ) ; +#5252 = CARTESIAN_POINT ( 'NONE', ( 43.05688102526462300, -9.867052023732949100, -20.41806981878748300 ) ) ; +#5253 = CARTESIAN_POINT ( 'NONE', ( 11.84210803520703000, -30.40062936482600600, 27.30207806022225400 ) ) ; +#5254 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -5.000000000023421300, -19.35342349035648700 ) ) ; +#5255 = CARTESIAN_POINT ( 'NONE', ( 39.89704412566696600, -29.99264018382196500, 21.62810280715470800 ) ) ; +#5256 = CARTESIAN_POINT ( 'NONE', ( 8.113808547490171100, -9.473845985623540900, 24.70499555890238200 ) ) ; +#5257 = CARTESIAN_POINT ( 'NONE', ( 4.995007723457740100, -19.98963672304278600, -11.53571011077031900 ) ) ; +#5258 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 9.500000000000000000, 22.50000000000000700 ) ) ; +#5259 = CARTESIAN_POINT ( 'NONE', ( 4.999999918618738300, -29.71061042947956900, 21.60901691940279400 ) ) ; +#5260 = CARTESIAN_POINT ( 'NONE', ( 41.72327898825455600, -9.693645654354444500, 22.50000000000000000 ) ) ; +#5261 = CARTESIAN_POINT ( 'NONE', ( 10.56404825173267700, -30.26235365168119900, 26.72363293263759200 ) ) ; +#5262 = FACE_OUTER_BOUND ( 'NONE', #8859, .T. ) ; +#5263 = CARTESIAN_POINT ( 'NONE', ( 28.15747769835224900, -28.84505725442745200, 29.00766805662858200 ) ) ; +#5264 = CARTESIAN_POINT ( 'NONE', ( 0.6810690513010294600, -7.583705784263334400, -20.37463136358313100 ) ) ; +#5265 = CARTESIAN_POINT ( 'NONE', ( 36.62288136499994800, -9.294733415767881400, 25.01889372868721400 ) ) ; +#5266 = CARTESIAN_POINT ( 'NONE', ( 5.161077004317165000, -29.48593685671243100, 21.94362762176536900 ) ) ; +#5267 = CARTESIAN_POINT ( 'NONE', ( 44.46806655699197800, -11.04688893978420200, 8.558458326519524200 ) ) ; +#5268 = CARTESIAN_POINT ( 'NONE', ( 11.44105636087828300, -14.02561145148141200, -25.18559655010924600 ) ) ; +#5269 = CARTESIAN_POINT ( 'NONE', ( 36.68062517783113200, -31.09480123031331900, 24.85050518968598300 ) ) ; +#5270 = CARTESIAN_POINT ( 'NONE', ( 15.95067698649139700, -100.0000000000000100, 5.951366538839396400 ) ) ; +#5271 = EDGE_LOOP ( 'NONE', ( #11824, #12725, #684, #999, #3972 ) ) ; +#5272 = CARTESIAN_POINT ( 'NONE', ( 30.79746804531462000, -19.19923266242681600, 22.19444035959184100 ) ) ; +#5273 = ADVANCED_FACE ( 'NONE', ( #1961, #12112 ), #1426, .F. ) ; +#5274 = EDGE_CURVE ( 'NONE', #5178, #11764, #9767, .T. ) ; +#5275 = CARTESIAN_POINT ( 'NONE', ( 33.55005700229998700, -30.30980716763134500, 27.13314558284244500 ) ) ; +#5276 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000002100, -27.09143239524033200, 6.754920151478383000 ) ) ; +#5277 = CARTESIAN_POINT ( 'NONE', ( 21.17688643591770200, -19.13443560856326200, 23.34239922822204600 ) ) ; +#5278 = FACE_OUTER_BOUND ( 'NONE', #10581, .T. ) ; +#5279 = CARTESIAN_POINT ( 'NONE', ( 29.34752224758852900, -28.08124121815427900, 26.96588792517640000 ) ) ; +#5280 = CARTESIAN_POINT ( 'NONE', ( 11.50332850511137100, -14.63318570430928200, -25.20299911544547200 ) ) ; +#5281 = CARTESIAN_POINT ( 'NONE', ( 12.13044149382628800, -30.69074056039481100, 27.40503870308282700 ) ) ; +#5282 = CARTESIAN_POINT ( 'NONE', ( 8.810112156320897700, -29.64463512045944400, 25.53713018013781900 ) ) ; +#5283 = CARTESIAN_POINT ( 'NONE', ( 38.32971059030558800, -20.40261358042194900, -18.66584241384697800 ) ) ; +#5284 = CARTESIAN_POINT ( 'NONE', ( -1.422788176870138200E-013, -10.00002293907194700, -11.49744077694475800 ) ) ; +#5285 = CARTESIAN_POINT ( 'NONE', ( 41.01112614442114100, -9.744562105612464700, 24.99999999999509000 ) ) ; +#5286 = CARTESIAN_POINT ( 'NONE', ( 3.692244770527245600, -9.219104365893665300, -24.42115386720316600 ) ) ; +#5287 = ADVANCED_FACE ( 'NONE', ( #4324 ), #11534, .F. ) ; +#5288 = CARTESIAN_POINT ( 'NONE', ( 38.01847051247452200, -30.95440821592141800, 23.28651039989116400 ) ) ; +#5289 = FACE_OUTER_BOUND ( 'NONE', #4034, .T. ) ; +#5290 = CARTESIAN_POINT ( 'NONE', ( 35.53684838001755300, -29.94456260909079100, 26.06900926095072900 ) ) ; +#5291 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5292 = CARTESIAN_POINT ( 'NONE', ( 32.94968697212974700, -95.07596123493894400, 16.44215299902824200 ) ) ; +#5293 = CARTESIAN_POINT ( 'NONE', ( 27.93535080431633900, -28.03498427470385200, 27.28315096589391700 ) ) ; +#5294 = CARTESIAN_POINT ( 'NONE', ( 45.35210499197448500, -7.860484108248400900, 13.82224490706858700 ) ) ; +#5295 = CARTESIAN_POINT ( 'NONE', ( 31.58701523084687300, -32.89644138586484000, 27.36867768153948100 ) ) ; +#5296 = CARTESIAN_POINT ( 'NONE', ( 7.245665099900755900, -29.17851062705497600, 23.94863262786466900 ) ) ; +#5297 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999899800, -9.989626966954064700, 8.495538764944674500 ) ) ; +#5298 = CARTESIAN_POINT ( 'NONE', ( 31.43975994043886500, -30.83523261955357200, 27.87532269092436700 ) ) ; +#5299 = CARTESIAN_POINT ( 'NONE', ( 12.13116985859643300, -30.81168739308120100, 27.38183169794853800 ) ) ; +#5300 = ORIENTED_EDGE ( 'NONE', *, *, #7771, .F. ) ; +#5301 = EDGE_LOOP ( 'NONE', ( #567, #592, #618, #731 ) ) ; +#5302 = CARTESIAN_POINT ( 'NONE', ( 44.85752418994788800, -6.513060436172452200, -19.49338672880042400 ) ) ; +#5303 = CARTESIAN_POINT ( 'NONE', ( 38.92819234500002100, -28.88590759603936000, 21.88530889881896300 ) ) ; +#5304 = FACE_OUTER_BOUND ( 'NONE', #9416, .T. ) ; +#5305 = CARTESIAN_POINT ( 'NONE', ( 5.488918369270055400, -9.977733264505293000, 26.51917390129238000 ) ) ; +#5306 = CARTESIAN_POINT ( 'NONE', ( 3.950306867972218900, -17.89895777950750500, -11.49237918330112300 ) ) ; +#5307 = CARTESIAN_POINT ( 'NONE', ( 19.99712976857738100, -28.77860035106522200, 29.18882609816585800 ) ) ; +#5308 = CARTESIAN_POINT ( 'NONE', ( 43.86836403820060300, -8.171851714570118800, 18.36993727558785100 ) ) ; +#5309 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3256, #3682, #3211 ), + ( #3199, #3191, #3170 ), + ( #3155, #3146, #3105 ), + ( #3067, #3040, #3025 ), + ( #2978, #2889, #2874 ), + ( #2846, #2798, #2782 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( -8.673617379884035500E-018, 0.004920328778343760000, 0.009840657556687528600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8982413445597359200, 1.000000000000000000), + ( 1.000000000000000000, 0.8894025830649322500, 1.000000000000000000), + ( 1.000000000000000000, 0.8819224558713905100, 1.000000000000000000), + ( 1.000000000000000000, 0.8686879186448974700, 1.000000000000000000), + ( 1.000000000000000000, 0.8629451264997398700, 1.000000000000000000), + ( 1.000000000000000000, 0.8578769091425421100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#5310 = CARTESIAN_POINT ( 'NONE', ( 0.6766053892707026800, -9.782970106813458200, -17.19604632642578300 ) ) ; +#5311 = CARTESIAN_POINT ( 'NONE', ( 0.01775042107813753400, -5.616427048302903700, -19.40767361102318100 ) ) ; +#5312 = CARTESIAN_POINT ( 'NONE', ( 33.91808571390553300, -95.07596123493894400, 14.41445870334524300 ) ) ; +#5313 = ORIENTED_EDGE ( 'NONE', *, *, #11659, .F. ) ; +#5314 = CARTESIAN_POINT ( 'NONE', ( 6.175118436714053700, -30.65989676070852700, 21.91688578500341600 ) ) ; +#5315 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000700, -8.806496811844015200, 8.425115035095844400 ) ) ; +#5316 = ORIENTED_EDGE ( 'NONE', *, *, #11331, .F. ) ; +#5317 = CARTESIAN_POINT ( 'NONE', ( 11.49259027161118900, -16.46407670019150500, -25.14180548906755800 ) ) ; +#5318 = CARTESIAN_POINT ( 'NONE', ( 36.63422182066072000, -29.87409741652907900, 25.36062805096891600 ) ) ; +#5319 = CIRCLE ( 'NONE', #9909, 1.200000000000010200 ) ; +#5320 = CARTESIAN_POINT ( 'NONE', ( 8.422237887215139600, -100.0000000000000100, -1.248825278329975600 ) ) ; +#5321 = CARTESIAN_POINT ( 'NONE', ( 33.67970355558024700, -19.29183747530327500, 20.55364628589985200 ) ) ; +#5322 = CARTESIAN_POINT ( 'NONE', ( 33.57004147617802700, -30.71176273437415100, 27.10786227722011100 ) ) ; +#5323 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -91.87370306964653800, -1.973360450122114500 ) ) ; +#5324 = CARTESIAN_POINT ( 'NONE', ( 20.14922839201818400, -19.12974947774600000, 23.42543349893953000 ) ) ; +#5325 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5326 = CARTESIAN_POINT ( 'NONE', ( 8.945334590714699300, -11.41793226645803300, -25.00000000000000700 ) ) ; +#5327 = CARTESIAN_POINT ( 'NONE', ( 12.33821198787969700, -30.96217208529819900, 27.41921016152166100 ) ) ; +#5328 = ORIENTED_EDGE ( 'NONE', *, *, #11659, .T. ) ; +#5329 = CARTESIAN_POINT ( 'NONE', ( 8.890877186941116500, -30.86572437810237800, 25.58407409358106200 ) ) ; +#5330 = CARTESIAN_POINT ( 'NONE', ( 0.5272787273036423400, -11.05421153678499400, -11.69353384917360800 ) ) ; +#5331 = CARTESIAN_POINT ( 'NONE', ( 37.04456955497371200, -11.19887541259053900, 23.86967100090861000 ) ) ; +#5332 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5333 = AXIS2_PLACEMENT_3D ( 'NONE', #7016, #921, #8041 ) ; +#5334 = EDGE_LOOP ( 'NONE', ( #9837, #10141, #11436, #12010, #12330, #12465, #12639, #335, #477, #769, #1364, #1532, #1733, #1969, #2010, #2177, #2436, #2494, #2814, #2987 ) ) ; +#5335 = CARTESIAN_POINT ( 'NONE', ( 38.44803312701981200, -29.87668182087695700, 23.89066528555671500 ) ) ; +#5336 = CARTESIAN_POINT ( 'NONE', ( 0.5990300819583580500, -95.07596123493894400, 0.7602325291602418700 ) ) ; +#5337 = ORIENTED_EDGE ( 'NONE', *, *, #4934, .F. ) ; +#5338 = CARTESIAN_POINT ( 'NONE', ( 35.60067642515253500, -30.72430325208727800, 26.03102665244984200 ) ) ; +#5339 = CARTESIAN_POINT ( 'NONE', ( 13.63771296997102100, -32.81590427457359000, 25.59111035014559100 ) ) ; +#5340 = VERTEX_POINT ( 'NONE', #9128 ) ; +#5341 = ORIENTED_EDGE ( 'NONE', *, *, #4316, .F. ) ; +#5342 = CARTESIAN_POINT ( 'NONE', ( 36.60193078771189300, -94.71799171674833000, 15.74191768022353200 ) ) ; +#5343 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5344 = CARTESIAN_POINT ( 'NONE', ( 44.90854844941326000, -7.873004505116569800, 15.22973126616037100 ) ) ; +#5345 = CARTESIAN_POINT ( 'NONE', ( 30.79794824467962000, -31.73787585330107700, 20.01290877163029000 ) ) ; +#5346 = ADVANCED_FACE ( 'NONE', ( #1345, #3999, #6744, #9467 ), #12229, .F. ) ; +#5347 = CARTESIAN_POINT ( 'NONE', ( 6.904017727333913600, -30.39334423596611900, 24.21738074435693400 ) ) ; +#5348 = CARTESIAN_POINT ( 'NONE', ( 44.46929299184974800, -11.05108550954963700, 8.434258429957557400 ) ) ; +#5349 = ORIENTED_EDGE ( 'NONE', *, *, #6327, .F. ) ; +#5350 = CARTESIAN_POINT ( 'NONE', ( 31.33705352008783900, -30.80929181355572400, 27.91086063530186200 ) ) ; +#5351 = CARTESIAN_POINT ( 'NONE', ( 15.17974500759097500, -32.89140275651298100, 27.94704275965033000 ) ) ; +#5352 = AXIS2_PLACEMENT_3D ( 'NONE', #3336, #10471, #4341 ) ; +#5353 = CARTESIAN_POINT ( 'NONE', ( 39.38800213451084900, -12.28815046102149300, 20.30981540777277800 ) ) ; +#5354 = CARTESIAN_POINT ( 'NONE', ( 39.99154249419011400, -29.67416011771219400, 21.74767002684742000 ) ) ; +#5355 = ORIENTED_EDGE ( 'NONE', *, *, #3900, .F. ) ; +#5356 = CARTESIAN_POINT ( 'NONE', ( 7.689345245230682300, -9.705594932377636000, 24.21633913201595300 ) ) ; +#5357 = CARTESIAN_POINT ( 'NONE', ( 5.004513374297682800, -22.32847610169232400, -11.56879945013986000 ) ) ; +#5358 = ORIENTED_EDGE ( 'NONE', *, *, #7968, .T. ) ; +#5359 = ADVANCED_FACE ( 'NONE', ( #6420 ), #8407, .F. ) ; +#5360 = CARTESIAN_POINT ( 'NONE', ( 25.10306456692114100, -19.87568216611860800, 23.25829123793067100 ) ) ; +#5361 = EDGE_CURVE ( 'NONE', #5523, #8500, #5994, .T. ) ; +#5362 = CARTESIAN_POINT ( 'NONE', ( 31.72617750844267800, -94.73950499739399300, 17.74757269213396100 ) ) ; +#5363 = CARTESIAN_POINT ( 'NONE', ( 6.071532165918824800E-015, -5.000000000000023100, 16.06938735382970800 ) ) ; +#5364 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669238400, 0.9848077530122091300 ) ) ; +#5365 = CARTESIAN_POINT ( 'NONE', ( 5.125315220050040900, -29.84776831889233500, 22.03376879104242600 ) ) ; +#5366 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999968000, -9.994127909647110300, 8.384363316412894600 ) ) ; +#5367 = CARTESIAN_POINT ( 'NONE', ( 0.6496112253394157300, -9.999999999999998200, -16.66595109963399300 ) ) ; +#5368 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #6831 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #10221, #4098, #11242 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#5369 = CARTESIAN_POINT ( 'NONE', ( 36.63424311019628000, -30.84007983616515600, 25.19030053094566000 ) ) ; +#5370 = VERTEX_POINT ( 'NONE', #11919 ) ; +#5371 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.35988299022007200, 15.15890432326802000 ) ) ; +#5372 = ORIENTED_EDGE ( 'NONE', *, *, #11412, .F. ) ; +#5373 = CARTESIAN_POINT ( 'NONE', ( 36.42077533671004400, -19.43697498770088600, 17.98226767883861800 ) ) ; +#5374 = ORIENTED_EDGE ( 'NONE', *, *, #12720, .F. ) ; +#5375 = CARTESIAN_POINT ( 'NONE', ( 33.54902565446627000, -31.04648353055975500, 27.00090185185411300 ) ) ; +#5376 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.57596123493894400, 11.50239124669685300 ) ) ; +#5377 = CARTESIAN_POINT ( 'NONE', ( 19.11324289380024800, -19.13122618060677000, 23.39926757445048000 ) ) ; +#5378 = PLANE ( 'NONE', #10295 ) ; +#5379 = CARTESIAN_POINT ( 'NONE', ( 0.6394282707735332600, -10.08280722141872900, -16.46366291583306600 ) ) ; +#5380 = CARTESIAN_POINT ( 'NONE', ( 12.33285678794328700, -30.76247918190168200, 27.47082787853014500 ) ) ; +#5381 = AXIS2_PLACEMENT_3D ( 'NONE', #3555, #4568, #11711 ) ; +#5382 = CARTESIAN_POINT ( 'NONE', ( 8.890868168176236700, -29.98474241813881500, 25.73942503833517700 ) ) ; +#5383 = EDGE_CURVE ( 'NONE', #10448, #6473, #3689, .T. ) ; +#5384 = CARTESIAN_POINT ( 'NONE', ( 33.37457713172212000, -11.21980039037486100, 25.00000000000000000 ) ) ; +#5385 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000900, 18.70000000000001700 ) ) ; +#5386 = EDGE_CURVE ( 'NONE', #9379, #3287, #11812, .T. ) ; +#5387 = LINE ( 'NONE', #8912, #7493 ) ; +#5388 = CARTESIAN_POINT ( 'NONE', ( 38.07721526617725500, -30.86293500809734900, 23.47386518140147200 ) ) ; +#5389 = CARTESIAN_POINT ( 'NONE', ( 5.449272561468394100, -89.85744524174053500, -0.4790332503554191600 ) ) ; +#5390 = CARTESIAN_POINT ( 'NONE', ( 35.40360623562894900, -29.79610680487139300, 26.08852494438702900 ) ) ; +#5391 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, 3.189999999999994200 ) ) ; +#5392 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5393 = CARTESIAN_POINT ( 'NONE', ( 0.6294944189764780700, -10.16276013590410400, -16.25612498347949500 ) ) ; +#5394 = CARTESIAN_POINT ( 'NONE', ( 34.11266019899257900, -37.74862711309079800, 16.98544764958444400 ) ) ; +#5395 = CARTESIAN_POINT ( 'NONE', ( 7.221935704799897800, -29.34633179800222200, 24.12275684634610700 ) ) ; +#5396 = CARTESIAN_POINT ( 'NONE', ( 41.04840699176939700, -17.89778369136017500, -11.40307361414840800 ) ) ; +#5397 = CARTESIAN_POINT ( 'NONE', ( 31.33675883132088600, -30.82428157309209400, 27.90830337046743600 ) ) ; +#5398 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #10361, #1211, #4239 ), + ( #11384, #5264, #12361 ), + ( #6305, #252, #7359 ), + ( #1258, #8385, #2261 ), + ( #9403, #3275, #10406 ), + ( #4283, #11430, #5311 ), + ( #12400, #6351, #298 ), + ( #7405, #1300, #8438 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( -2.168404344971008900E-018, 0.003107530513992116900, 0.004661295770988177100, 0.006215061027984236500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9829366249987531200, 1.000000000000000000), + ( 1.000000000000000000, 0.9875184037549733500, 1.000000000000000000), + ( 1.000000000000000000, 0.9917377174833196300, 1.000000000000000000), + ( 1.000000000000000000, 0.9964464047175208800, 1.000000000000000000), + ( 1.000000000000000000, 0.9977395305655270000, 1.000000000000000000), + ( 1.000000000000000000, 0.9995103763192714200, 1.000000000000000000), + ( 1.000000000000000000, 0.9999997969640743700, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#5399 = CARTESIAN_POINT ( 'NONE', ( 11.28803614457432200, -32.39514169194756500, 24.76042201032530700 ) ) ; +#5400 = AXIS2_PLACEMENT_3D ( 'NONE', #10646, #3512, #2497 ) ; +#5401 = CIRCLE ( 'NONE', #11827, 1.200000000000010200 ) ; +#5402 = CARTESIAN_POINT ( 'NONE', ( 38.93004716985504400, -30.57937547183978900, 21.58655962788645900 ) ) ; +#5403 = ORIENTED_EDGE ( 'NONE', *, *, #12226, .T. ) ; +#5404 = CARTESIAN_POINT ( 'NONE', ( 17.06832700498235100, -19.14641537379970200, 23.13012793052096700 ) ) ; +#5405 = CARTESIAN_POINT ( 'NONE', ( 4.994920859041860300, -19.99051336488309600, -11.55348315842255000 ) ) ; +#5406 = CARTESIAN_POINT ( 'NONE', ( 20.18719255689187600, -30.86501923738227400, 26.28236762573407100 ) ) ; +#5407 = CARTESIAN_POINT ( 'NONE', ( 13.89828428010101500, -93.16226521817529300, 22.17399092079080300 ) ) ; +#5408 = CARTESIAN_POINT ( 'NONE', ( 10.03757415778112400, -100.0000000000000100, -33.33891646864278600 ) ) ; +#5409 = CARTESIAN_POINT ( 'NONE', ( 32.09863200989554600, -10.43079757070501200, -25.07596123493895100 ) ) ; +#5410 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122092400, 0.1736481776669238900 ) ) ; +#5411 = CARTESIAN_POINT ( 'NONE', ( 11.20540270219413000, -12.91218725338121800, 24.48650281435363500 ) ) ; +#5412 = FACE_OUTER_BOUND ( 'NONE', #8347, .T. ) ; +#5413 = CARTESIAN_POINT ( 'NONE', ( 6.173285875994038100, -28.92438003234277500, 22.22232193888763900 ) ) ; +#5414 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, -8.811662124091491000, 8.328534446285127400 ) ) ; +#5415 = CARTESIAN_POINT ( 'NONE', ( 0.6109561552306151900, -10.31195699779251600, -15.84153712579262500 ) ) ; +#5416 = CARTESIAN_POINT ( 'NONE', ( 36.27245465920640300, -29.62298140864042800, 25.47071946337949900 ) ) ; +#5417 = CARTESIAN_POINT ( 'NONE', ( 38.65895652207187500, -19.63989535435415600, 14.38605101331273600 ) ) ; +#5418 = ADVANCED_FACE ( 'NONE', ( #1651 ), #707, .T. ) ; +#5419 = EDGE_CURVE ( 'NONE', #4031, #12155, #3623, .T. ) ; +#5420 = CARTESIAN_POINT ( 'NONE', ( 33.47043025435910100, -30.63063572432142600, 27.16508021360729000 ) ) ; +#5421 = CARTESIAN_POINT ( 'NONE', ( 16.05949315056707500, -19.16013173760783100, 22.88708557636568100 ) ) ; +#5422 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -99.99999999999998600, -40.86942826376123600 ) ) ; +#5423 = CARTESIAN_POINT ( 'NONE', ( 0.6022499243001419000, -10.38194663011790900, -15.63261805310754000 ) ) ; +#5424 = CARTESIAN_POINT ( 'NONE', ( 12.33793218366204800, -30.52798304760145200, 27.49660382830617400 ) ) ; +#5425 = CARTESIAN_POINT ( 'NONE', ( 9.061323768954672200, -31.12000119102646800, 25.48310144116100800 ) ) ; +#5426 = CARTESIAN_POINT ( 'NONE', ( 11.21320343559641900, -99.99999999999998600, -40.86942826376122200 ) ) ; +#5427 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #12076, #8088, #1965 ), + ( #9103, #2984, #10107 ), + ( #3980, #11131, #5017 ), + ( #12116, #6049, #13072 ), + ( #7101, #1007, #8131 ), + ( #2013, #9147, #3028 ), + ( #10155, #4025, #11176 ), + ( #5065, #12161, #6092 ), + ( #40, #7148, #1050 ), + ( #8173, #2059, #9190 ), + ( #3070, #10202, #4075 ), + ( #11218, #5106, #12203 ), + ( #6137, #85, #7197 ), + ( #1095, #8223, #2103 ), + ( #9236, #3110, #10244 ), + ( #4123, #11267, #5146 ), + ( #12250, #6186, #133 ), + ( #7238, #1142, #8270 ), + ( #2144, #9277, #3158 ), + ( #10287, #4167, #11311 ), + ( #5192, #12291, #6230 ), + ( #179, #7286, #1185 ), + ( #8316, #2186, #9322 ), + ( #3202, #10334, #4213 ), + ( #11353, #5236, #12334 ), + ( #6277, #228, #7332 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -5.453552816813895000E-005, -1.860456820319324000E-005, -6.390882207203849900E-007, 1.732639176175247000E-005, 8.918831169164389000E-005, 0.0002329121515514267300, 0.0005203598312709924400, 0.001095255190710123700, 0.002245045909588386600, 0.003394836628466649400, 0.004544627347344912200, 0.006844208785101437900, 0.009143790222857963600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9732600081643653100, 1.000000000000000000), + ( 1.000000000000000000, 0.9732574878625985800, 1.000000000000000000), + ( 1.000000000000000000, 0.9732549670154849700, 1.000000000000000000), + ( 1.000000000000000000, 0.9732511849263034700, 1.000000000000000000), + ( 1.000000000000000000, 0.9732500160447302700, 1.000000000000000000), + ( 1.000000000000000000, 0.9732473102037088000, 1.000000000000000000), + ( 1.000000000000000000, 0.9732451030560642600, 1.000000000000000000), + ( 1.000000000000000000, 0.9732356709491453200, 1.000000000000000000), + ( 1.000000000000000000, 0.9732272884252044500, 1.000000000000000000), + ( 1.000000000000000000, 0.9731996532352654700, 1.000000000000000000), + ( 1.000000000000000000, 0.9731779129893141100, 1.000000000000000000), + ( 1.000000000000000000, 0.9731029233720240900, 1.000000000000000000), + ( 1.000000000000000000, 0.9730399058978058700, 1.000000000000000000), + ( 1.000000000000000000, 0.9728132043646743300, 1.000000000000000000), + ( 1.000000000000000000, 0.9726118847069441500, 1.000000000000000000), + ( 1.000000000000000000, 0.9718682914971802400, 1.000000000000000000), + ( 1.000000000000000000, 0.9711865979841781700, 1.000000000000000000), + ( 1.000000000000000000, 0.9695043493829081900, 1.000000000000000000), + ( 1.000000000000000000, 0.9684959373882198200, 1.000000000000000000), + ( 1.000000000000000000, 0.9662483573411579900, 1.000000000000000000), + ( 1.000000000000000000, 0.9650210712866877900, 1.000000000000000000), + ( 1.000000000000000000, 0.9611177175375501500, 1.000000000000000000), + ( 1.000000000000000000, 0.9582248414283293100, 1.000000000000000000), + ( 1.000000000000000000, 0.9521435396218133100, 1.000000000000000000), + ( 1.000000000000000000, 0.9489498504461219000, 1.000000000000000000), + ( 1.000000000000000000, 0.9458302556961977200, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#5428 = ORIENTED_EDGE ( 'NONE', *, *, #8308, .T. ) ; +#5429 = CARTESIAN_POINT ( 'NONE', ( 38.06649676424486000, -29.48188141430922500, 24.00450656575986800 ) ) ; +#5430 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #772, #2780, #8952, #2828 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 6.499207794976826700E-005 ), + .UNSPECIFIED. ) ; +#5431 = CARTESIAN_POINT ( 'NONE', ( 35.52265143306125600, -30.54021483864816500, 26.14526515724976400 ) ) ; +#5432 = CARTESIAN_POINT ( 'NONE', ( 33.64922143449354800, -95.07596123493897300, 15.12218545587392500 ) ) ; +#5433 = EDGE_CURVE ( 'NONE', #12155, #2958, #1293, .T. ) ; +#5434 = PLANE ( 'NONE', #9800 ) ; +#5435 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5436 = CARTESIAN_POINT ( 'NONE', ( 0.5780921207305084200, -10.57767695697593900, -15.00083051476020700 ) ) ; +#5437 = CARTESIAN_POINT ( 'NONE', ( 39.26413662937012800, -30.26942355435903300, 20.62625925236187300 ) ) ; +#5438 = CARTESIAN_POINT ( 'NONE', ( 7.119846582061127200, -30.77105220313763600, 23.99870917538627800 ) ) ; +#5439 = CARTESIAN_POINT ( 'NONE', ( 39.92742180334217000, -22.34242865802676500, -10.41953137900908300 ) ) ; +#5440 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983000, 27.93782961424065500 ) ) ; +#5441 = CARTESIAN_POINT ( 'NONE', ( 5.765465085439312400, -28.80177544114115700, 24.07003930763340800 ) ) ; +#5442 = EDGE_CURVE ( 'NONE', #4698, #9000, #3381, .T. ) ; +#5443 = VECTOR ( 'NONE', #2015, 1000.000000000000000 ) ; +#5444 = CARTESIAN_POINT ( 'NONE', ( 39.73798662504940900, -29.34546081827998500, 21.91651737431210700 ) ) ; +#5445 = AXIS2_PLACEMENT_3D ( 'NONE', #3710, #10847, #4737 ) ; +#5446 = CARTESIAN_POINT ( 'NONE', ( 14.11160146258217900, -19.19922978021531200, 22.19430136248000800 ) ) ; +#5447 = CARTESIAN_POINT ( 'NONE', ( 3.950021115208569800, -17.89932276953083000, -11.51471148192664100 ) ) ; +#5448 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -31.29513776008465000, 28.74509265499354200 ) ) ; +#5449 = CARTESIAN_POINT ( 'NONE', ( 10.02666123489618700, -97.46860963222083300, 20.19613507091845500 ) ) ; +#5450 = CARTESIAN_POINT ( 'NONE', ( 10.18103665884819800, -20.13654215166465300, -23.85205497487825400 ) ) ; +#5451 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -99.99999999999998600, 21.63057173623876400 ) ) ; +#5452 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 7.000000000000000000, -17.49999999999999600 ) ) ; +#5453 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5454 = CARTESIAN_POINT ( 'NONE', ( 13.77379534647110600, -15.82974775212303900, 23.97205818057624100 ) ) ; +#5455 = CARTESIAN_POINT ( 'NONE', ( 5.407593572334167900, -30.21918521491430100, 22.08152910350715100 ) ) ; +#5456 = FACE_OUTER_BOUND ( 'NONE', #8074, .T. ) ; +#5457 = CARTESIAN_POINT ( 'NONE', ( 0.5646133188527578900, -10.68875899315158200, -14.57366801991675600 ) ) ; +#5458 = CARTESIAN_POINT ( 'NONE', ( 39.71343661354688200, -19.83109699528137400, 10.99815084845996800 ) ) ; +#5459 = EDGE_CURVE ( 'NONE', #5839, #7387, #6087, .T. ) ; +#5460 = CARTESIAN_POINT ( 'NONE', ( 13.31554623362389500, -89.29659766701489300, 9.458710949950408100 ) ) ; +#5461 = CARTESIAN_POINT ( 'NONE', ( 33.45426267262425300, -31.01271387711282700, 27.06062878681713700 ) ) ; +#5462 = CARTESIAN_POINT ( 'NONE', ( 13.17264159404108300, -19.22460949266369900, 21.74459434482390600 ) ) ; +#5463 = CARTESIAN_POINT ( 'NONE', ( 10.03220454034422500, -20.32149963875677700, -23.67186603788616800 ) ) ; +#5464 = CARTESIAN_POINT ( 'NONE', ( 0.5436316092363019400, -10.86789232512621500, -13.71547359220319300 ) ) ; +#5465 = CARTESIAN_POINT ( 'NONE', ( 12.74009275087729000, -30.83135118121336800, 27.60612338680887800 ) ) ; +#5466 = CARTESIAN_POINT ( 'NONE', ( 8.927757154080056900, -30.31999140979320000, 25.81912077605525400 ) ) ; +#5467 = FACE_OUTER_BOUND ( 'NONE', #185, .T. ) ; +#5468 = DIRECTION ( 'NONE', ( -0.9998119252975813400, 0.01909902633496520300, 0.003367673648115719800 ) ) ; +#5469 = CARTESIAN_POINT ( 'NONE', ( 31.12414732399335200, -28.14358378613636800, 26.50241616394992100 ) ) ; +#5470 = CARTESIAN_POINT ( 'NONE', ( 34.46998973023097100, -11.90228462546705200, 24.66457589554327600 ) ) ; +#5471 = CARTESIAN_POINT ( 'NONE', ( 38.19953984116769200, -30.54729594110660800, 23.92248457418088100 ) ) ; +#5472 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10738, #3611, #5666, #12717, #6706, #629, #7745, #1633, #8772, #2632, #9769, #3655 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002579949327909526100, 0.003869923991864284700, 0.004514911323841664300, 0.004837404989830350500, 0.005159898655819037500 ), + .UNSPECIFIED. ) ; +#5473 = ORIENTED_EDGE ( 'NONE', *, *, #12061, .F. ) ; +#5474 = CARTESIAN_POINT ( 'NONE', ( 35.40329862682792600, -31.16330664218660100, 25.84697281544754000 ) ) ; +#5475 = CARTESIAN_POINT ( 'NONE', ( 34.02669195967993700, -16.84831001779776100, -24.88523528509166000 ) ) ; +#5476 = VECTOR ( 'NONE', #11398, 1000.000000000000000 ) ; +#5477 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 8.200000000000013500, -17.49999999999999600 ) ) ; +#5478 = CARTESIAN_POINT ( 'NONE', ( 2.278424407690206700, 11.74708242360304500, -23.60787796154920300 ) ) ; +#5479 = CARTESIAN_POINT ( 'NONE', ( 37.54947081638778900, -30.96653092008201500, 14.56942902031465100 ) ) ; +#5480 = ADVANCED_FACE ( 'NONE', ( #11518 ), #12084, .F. ) ; +#5481 = CARTESIAN_POINT ( 'NONE', ( 6.995759234603030000, -29.76440360877694100, 24.28590746839041300 ) ) ; +#5482 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983000, 27.93782961424065500 ) ) ; +#5483 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5484 = CARTESIAN_POINT ( 'NONE', ( 39.17151117051948700, -30.49252458164839700, 21.71732808999985000 ) ) ; +#5485 = ORIENTED_EDGE ( 'NONE', *, *, #2550, .F. ) ; +#5486 = CARTESIAN_POINT ( 'NONE', ( 11.40427608016225000, -19.28596040674277700, 20.65750808814990300 ) ) ; +#5487 = CARTESIAN_POINT ( 'NONE', ( 5.004405779759328400, -22.32894081978079400, -11.57336062084442200 ) ) ; +#5488 = ADVANCED_FACE ( 'NONE', ( #8524 ), #9760, .F. ) ; +#5489 = VERTEX_POINT ( 'NONE', #1860 ) ; +#5490 = CARTESIAN_POINT ( 'NONE', ( 44.90291286365120300, 10.18993461597465700, -17.13949627301116900 ) ) ; +#5491 = CARTESIAN_POINT ( 'NONE', ( 8.885216200937453100, -94.72593719297395900, 15.95984444834856400 ) ) ; +#5492 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000700, -8.384323441535308100, 10.61856882547546000 ) ) ; +#5493 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5823, #8592, #5566, #8716, #9059, #8576, #8562, #8547, #8533, #8506, #8465, #8420, #8398, #8363, #8324, #8280, #8266, #8217, #8184, #8143 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002226100544389946700, 0.004452201088779893400, 0.005565251360974866500, 0.006678301633169838800, 0.008904402177559802400, 0.01335660326633973300, 0.01558270381072970700, 0.01669575408292470900, 0.01780880435511970900 ), + .UNSPECIFIED. ) ; +#5494 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000000, -1.200000000000008400 ) ) ; +#5495 = CARTESIAN_POINT ( 'NONE', ( 42.49999999999999300, 12.00000000000000000, 22.50000000000000700 ) ) ; +#5496 = CARTESIAN_POINT ( 'NONE', ( 16.51751874654560100, -18.04950294669020400, 23.58065544920628700 ) ) ; +#5497 = CARTESIAN_POINT ( 'NONE', ( 5.952434687165757400, -29.05211032159866500, 22.29445049655834400 ) ) ; +#5498 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5499 = EDGE_LOOP ( 'NONE', ( #4052, #928, #2779, #3571 ) ) ; +#5500 = CARTESIAN_POINT ( 'NONE', ( 10.86402129433479900, -31.02354206108641000, 26.72004804340163300 ) ) ; +#5501 = ORIENTED_EDGE ( 'NONE', *, *, #6041, .F. ) ; +#5502 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -27.23413567771367000, 29.46115689082877500 ) ) ; +#5503 = CARTESIAN_POINT ( 'NONE', ( 33.26644211675007100, -30.52102308757642000, 27.25916282620927000 ) ) ; +#5504 = VERTEX_POINT ( 'NONE', #10750 ) ; +#5505 = CARTESIAN_POINT ( 'NONE', ( -1.256439632392267500E-016, -94.74682992296712300, 18.71443453778741500 ) ) ; +#5506 = CARTESIAN_POINT ( 'NONE', ( 7.544184216815272000, -9.776237646588168000, 24.05182844300411900 ) ) ; +#5507 = CARTESIAN_POINT ( 'NONE', ( 42.18194428169096000, -9.307237632627069600, -23.82922743343136700 ) ) ; +#5508 = CARTESIAN_POINT ( 'NONE', ( 0.5323059191565283600, -10.97054348281015000, -13.06718111202782100 ) ) ; +#5509 = CARTESIAN_POINT ( 'NONE', ( 12.74027680429321500, -30.67091637537414100, 27.63243506617634200 ) ) ; +#5510 = VERTEX_POINT ( 'NONE', #3624 ) ; +#5511 = CARTESIAN_POINT ( 'NONE', ( 9.250331892289864300, -31.16977811567078400, 25.58123419758737400 ) ) ; +#5512 = ORIENTED_EDGE ( 'NONE', *, *, #11046, .F. ) ; +#5513 = CARTESIAN_POINT ( 'NONE', ( 36.67304989933316500, -31.10883149961230000, 25.48555634975100400 ) ) ; +#5514 = CARTESIAN_POINT ( 'NONE', ( 35.22088926648291400, -10.04183946030831400, 24.99262257428936700 ) ) ; +#5515 = AXIS2_PLACEMENT_3D ( 'NONE', #9724, #3605, #10730 ) ; +#5516 = CARTESIAN_POINT ( 'NONE', ( 37.77250742449158600, -29.20117064769556200, 23.96047904129340400 ) ) ; +#5517 = CARTESIAN_POINT ( 'NONE', ( 35.23156936922922700, -30.40606436955972900, 26.32568358351905500 ) ) ; +#5518 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#5519 = ORIENTED_EDGE ( 'NONE', *, *, #10779, .F. ) ; +#5520 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5521 = CARTESIAN_POINT ( 'NONE', ( 0.5279973422755991400, -11.02386067910239100, -12.41165453038885900 ) ) ; +#5522 = CARTESIAN_POINT ( 'NONE', ( 39.32895237096296600, -31.68329557903569300, 10.47399332742094000 ) ) ; +#5523 = VERTEX_POINT ( 'NONE', #11769 ) ; +#5524 = CARTESIAN_POINT ( 'NONE', ( 7.469756176433922000, -31.03497511813057100, 23.93220474229906400 ) ) ; +#5525 = CARTESIAN_POINT ( 'NONE', ( 20.10623885557839000, -28.77640292087745900, 29.18921356439634000 ) ) ; +#5526 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983000, 27.93782961424065500 ) ) ; +#5527 = CARTESIAN_POINT ( 'NONE', ( 24.81280744310812700, -31.29913968154961900, 28.74438700826458900 ) ) ; +#5528 = CARTESIAN_POINT ( 'NONE', ( 39.15326408883994000, -29.01947751742711300, 22.03358693682880800 ) ) ; +#5529 = CARTESIAN_POINT ( 'NONE', ( 7.181075518890170700, -19.54519567370038400, 16.06407863098536400 ) ) ; +#5530 = CARTESIAN_POINT ( 'NONE', ( 4.994895060546622500, -19.99081192055899300, -11.55940814248701500 ) ) ; +#5531 = ORIENTED_EDGE ( 'NONE', *, *, #2470, .T. ) ; +#5532 = DATE_AND_TIME ( #8281, #10948 ) ; +#5533 = DIRECTION ( 'NONE', ( 0.5368593757340758300, -0.8436717434443437000, 0.0000000000000000000 ) ) ; +#5534 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000900, 16.29999999999999700 ) ) ; +#5535 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5536 = EDGE_CURVE ( 'NONE', #11089, #6650, #7426, .T. ) ; +#5537 = ORIENTED_EDGE ( 'NONE', *, *, #8141, .F. ) ; +#5538 = CARTESIAN_POINT ( 'NONE', ( 34.44334742095776400, -12.49999999999999800, -18.56147712889361000 ) ) ; +#5539 = CARTESIAN_POINT ( 'NONE', ( 35.98930253218524200, -18.75050771965939600, -23.30753190414326100 ) ) ; +#5540 = CARTESIAN_POINT ( 'NONE', ( 20.00000000068497700, -19.13175989804976100, 23.38981055321568500 ) ) ; +#5541 = CARTESIAN_POINT ( 'NONE', ( 6.103532360281879400, -30.62825430866543600, 22.32689316222150200 ) ) ; +#5542 = CARTESIAN_POINT ( 'NONE', ( 44.47075250872490000, -11.05468375415533400, 8.247176915660606500 ) ) ; +#5543 = CARTESIAN_POINT ( 'NONE', ( 10.83870396485669300, -30.53558995991386400, 26.85935333921490900 ) ) ; +#5544 = EDGE_LOOP ( 'NONE', ( #10151, #10307, #10612, #10635 ) ) ; +#5545 = ADVANCED_FACE ( 'NONE', ( #5456 ), #10556, .F. ) ; +#5546 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -89.20772034660431900, 11.03354182248334700 ) ) ; +#5547 = CARTESIAN_POINT ( 'NONE', ( 33.26644379265020000, -30.88152250225399000, 27.19559839065255200 ) ) ; +#5548 = CARTESIAN_POINT ( 'NONE', ( 38.86878722445602100, -32.97682908738742900, 11.58716313004214100 ) ) ; +#5549 = CARTESIAN_POINT ( 'NONE', ( 5.618278835459606500, -9.963341907213541400, 26.73554102851165800 ) ) ; +#5550 = CIRCLE ( 'NONE', #10895, 4.999999999999999100 ) ; +#5551 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 3.469446951953615200E-016, -1.000000000000000000 ) ) ; +#5552 = CARTESIAN_POINT ( 'NONE', ( 0.5267253584328884800, -11.04823483783695300, -11.97299862171976200 ) ) ; +#5553 = ORIENTED_EDGE ( 'NONE', *, *, #6792, .F. ) ; +#5554 = CARTESIAN_POINT ( 'NONE', ( 12.94437460950583900, -30.88373596333078900, 27.66581648579891400 ) ) ; +#5555 = AXIS2_PLACEMENT_3D ( 'NONE', #8997, #3482, #11721 ) ; +#5556 = CARTESIAN_POINT ( 'NONE', ( 9.105777029129519900, -30.53374158439932600, 25.91014582815242700 ) ) ; +#5557 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, -15.51856112887629800 ) ) ; +#5558 = CARTESIAN_POINT ( 'NONE', ( 40.13832222136833400, -29.58713030419458800, 23.14205974178513600 ) ) ; +#5559 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 7.000000000000000000, -1.200000000000005700 ) ) ; +#5560 = ADVANCED_FACE ( 'NONE', ( #2742 ), #5123, .F. ) ; +#5561 = CARTESIAN_POINT ( 'NONE', ( 38.22130706108617200, -30.25310263046730000, 24.15768959093113100 ) ) ; +#5562 = CARTESIAN_POINT ( 'NONE', ( 1.734723475976807100E-015, -8.776201636587137100, -12.42231421046027700 ) ) ; +#5563 = LINE ( 'NONE', #4195, #8311 ) ; +#5564 = CARTESIAN_POINT ( 'NONE', ( 35.16531349190503200, -31.05598341712273600, 26.10085566702832700 ) ) ; +#5565 = CARTESIAN_POINT ( 'NONE', ( 33.96539343027112800, -16.33853347013095100, -24.96214448927078800 ) ) ; +#5566 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -97.50836345880590300, 10.00775520629629200 ) ) ; +#5567 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000002100, -27.09143239524033200, 6.754920151478383000 ) ) ; +#5568 = CARTESIAN_POINT ( 'NONE', ( 7.057145469950167000, -30.12578480042763800, 24.47585722234908800 ) ) ; +#5569 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2100, #2024, #1830, #1813 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001983894412344143900 ), + .UNSPECIFIED. ) ; +#5570 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -94.17745555879709200, 15.26009936631195700 ) ) ; +#5571 = CARTESIAN_POINT ( 'NONE', ( 39.71835612417150000, -30.16931264158869700, 21.82373196097643500 ) ) ; +#5572 = LINE ( 'NONE', #6074, #2544 ) ; +#5573 = CARTESIAN_POINT ( 'NONE', ( 6.670289409694423600, -19.59738641957784800, 15.13930279967785900 ) ) ; +#5574 = CARTESIAN_POINT ( 'NONE', ( 3.949929114995985200, -17.89945092925471200, -11.52215614607130500 ) ) ; +#5575 = ORIENTED_EDGE ( 'NONE', *, *, #10850, .T. ) ; +#5576 = CARTESIAN_POINT ( 'NONE', ( 16.13308447823167300, -95.07596123493894400, 16.58686576284507600 ) ) ; +#5577 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000002100, -8.696941300336943600, 9.522939988707740600 ) ) ; +#5578 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -3.469446951953615200E-016 ) ) ; +#5579 = CARTESIAN_POINT ( 'NONE', ( 17.31529296336215400, -19.14576058096475500, 23.14192884719714300 ) ) ; +#5580 = CARTESIAN_POINT ( 'NONE', ( 5.600992372694872900, -29.44882462880103800, 22.53221436976702200 ) ) ; +#5581 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000019200, -9.998234800638176300, 8.216951950928910600 ) ) ; +#5582 = CARTESIAN_POINT ( 'NONE', ( 10.96929847973837500, -31.08679096376919700, 26.74049830162258700 ) ) ; +#5583 = EDGE_CURVE ( 'NONE', #1577, #2930, #7872, .T. ) ; +#5584 = CARTESIAN_POINT ( 'NONE', ( 0.02104418569336664200, -5.473394249776127700, -19.72761107206065700 ) ) ; +#5585 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1681, #1852, #1939, #1638, #1554, #1508, #1473, #1433, #1346, #1304 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( -2.620136270240375400E-005, 0.002841245914780576400, 0.005708693192263556600, 0.008576140469746536300, 0.01144358774722951600 ), + .UNSPECIFIED. ) ; +#5587 = EDGE_CURVE ( 'NONE', #8605, #12155, #5003, .T. ) ; +#5586 = CARTESIAN_POINT ( 'NONE', ( 35.31572925790246100, -28.37708389684626200, 24.59929491938283500 ) ) ; +#5588 = CARTESIAN_POINT ( 'NONE', ( 33.15963677242170600, -30.42309169878944900, 27.30224202121067000 ) ) ; +#5589 = CARTESIAN_POINT ( 'NONE', ( 32.32835220439376700, -38.43450379858273200, 18.08987847672682000 ) ) ; +#5590 = CARTESIAN_POINT ( 'NONE', ( 5.844071876791495900, -19.70672053471686200, 13.20199484367851600 ) ) ; +#5591 = SPHERICAL_SURFACE ( 'NONE', #3443, 2.500000000000000000 ) ; +#5592 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000005300, -100.0000000000000300, -25.63802908547509300 ) ) ; +#5593 = CARTESIAN_POINT ( 'NONE', ( 12.94477559481696900, -30.75774873161737200, 27.69132151493555900 ) ) ; +#5594 = CARTESIAN_POINT ( 'NONE', ( 10.72563208631069100, -19.21624089845214900, -24.44575313263255000 ) ) ; +#5595 = CARTESIAN_POINT ( 'NONE', ( 9.243467924281679500, -29.71988136918410100, 25.84718862493218000 ) ) ; +#5596 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5597 = CARTESIAN_POINT ( 'NONE', ( 18.75934779302088600, -19.90880063699514600, 23.24451445924892200 ) ) ; +#5598 = CARTESIAN_POINT ( 'NONE', ( 4.431153285566675300, -11.37837740411926500, -23.11956035110602100 ) ) ; +#5599 = CARTESIAN_POINT ( 'NONE', ( 37.75300248813127300, -31.01194525456558900, 23.62461739545766500 ) ) ; +#5600 = CARTESIAN_POINT ( 'NONE', ( -6.545532464171089100E-013, -9.472305174795582900, -14.86902935868051800 ) ) ; +#5601 = FACE_OUTER_BOUND ( 'NONE', #8373, .T. ) ; +#5602 = CARTESIAN_POINT ( 'NONE', ( 35.00534571067337500, -30.15191524403104100, 26.41847648422741900 ) ) ; +#5603 = CARTESIAN_POINT ( 'NONE', ( 33.64771066131389400, -13.41914980538241600, -25.15601430610500700 ) ) ; +#5604 = CARTESIAN_POINT ( 'NONE', ( 12.90136799010446500, -9.562556682370408000, -25.00000000000000000 ) ) ; +#5605 = CARTESIAN_POINT ( 'NONE', ( 20.06133793030467400, -30.66176281334875100, 28.85677374700786000 ) ) ; +#5606 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 12.00000000000000000, -22.50000000000000000 ) ) ; +#5607 = CARTESIAN_POINT ( 'NONE', ( 7.487519923441773500, -29.23578777824890900, 24.23280733419436600 ) ) ; +#5608 = CARTESIAN_POINT ( 'NONE', ( 12.16608706262209900, -28.22076919746099200, 25.86445095738731600 ) ) ; +#5609 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -97.53565462453461500, 14.03967703676677200 ) ) ; +#5610 = EDGE_CURVE ( 'NONE', #9374, #569, #2423, .T. ) ; +#5611 = CARTESIAN_POINT ( 'NONE', ( 38.82654377182028300, -28.92436382968660200, 22.22266648877080500 ) ) ; +#5612 = FACE_OUTER_BOUND ( 'NONE', #8950, .T. ) ; +#5613 = CARTESIAN_POINT ( 'NONE', ( 5.528682005360577600, -19.76385840533081500, 12.18956015036684400 ) ) ; +#5614 = CARTESIAN_POINT ( 'NONE', ( 15.95067698649139700, -12.49999999999999600, 21.37997735082949900 ) ) ; +#5615 = ADVANCED_FACE ( 'NONE', ( #7560 ), #2645, .F. ) ; +#5616 = CARTESIAN_POINT ( 'NONE', ( 6.320566815431448900, -94.17021602992545600, 6.064793430330236200 ) ) ; +#5617 = CARTESIAN_POINT ( 'NONE', ( 38.74311286946823400, -100.0000000000000000, 17.91938285900863200 ) ) ; +#5618 = CARTESIAN_POINT ( 'NONE', ( 0.9084284741217723000, -8.452784834690811900, 16.38149653183796100 ) ) ; +#5619 = CARTESIAN_POINT ( 'NONE', ( 34.69056385392335800, -18.83083425874303200, -24.26776648791664600 ) ) ; +#5620 = CARTESIAN_POINT ( 'NONE', ( 12.72342807159455300, -19.24065258187237100, 21.46074469194010000 ) ) ; +#5621 = ORIENTED_EDGE ( 'NONE', *, *, #2625, .F. ) ; +#5622 = CARTESIAN_POINT ( 'NONE', ( 6.451758532746550800, -30.79435611806365700, 22.48849585889385900 ) ) ; +#5623 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, -8.816723574199333100, 8.183146718615159200 ) ) ; +#5624 = ORIENTED_EDGE ( 'NONE', *, *, #1635, .T. ) ; +#5625 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -99.99999999999998600, -38.36942826376122900 ) ) ; +#5626 = CARTESIAN_POINT ( 'NONE', ( 10.93534024622619000, -30.66117928263392400, 26.88828878859186500 ) ) ; +#5627 = FACE_OUTER_BOUND ( 'NONE', #2322, .T. ) ; +#5628 = EDGE_CURVE ( 'NONE', #11537, #1970, #80, .T. ) ; +#5629 = CARTESIAN_POINT ( 'NONE', ( 34.73942355647749700, -12.19623197613948700, 24.38134862614391800 ) ) ; +#5630 = EDGE_CURVE ( 'NONE', #9000, #9054, #2122, .T. ) ; +#5631 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, -17.49999999999999600 ) ) ; +#5632 = CARTESIAN_POINT ( 'NONE', ( 33.17112543242777200, -30.75935539571750600, 27.27025598316499000 ) ) ; +#5633 = CARTESIAN_POINT ( 'NONE', ( 7.910472254710313700, -12.50000000000001200, 12.58987206525735500 ) ) ; +#5634 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3925, #7896, #12064, #5988 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#5635 = CARTESIAN_POINT ( 'NONE', ( 5.106635454167260100, -19.88066710005492500, 10.11980897223575900 ) ) ; +#5636 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 9.500000000000000000, -19.48143887112369700 ) ) ; +#5637 = CARTESIAN_POINT ( 'NONE', ( 20.10328854700516700, -30.66083836454518500, 28.85693675227421600 ) ) ; +#5638 = CARTESIAN_POINT ( 'NONE', ( 13.25130111068234800, -30.87375470824811400, 27.77008436053487000 ) ) ; +#5639 = ORIENTED_EDGE ( 'NONE', *, *, #3658, .F. ) ; +#5640 = CARTESIAN_POINT ( 'NONE', ( 9.223600449754544100, -30.76794374828854100, 25.89030373941735500 ) ) ; +#5641 = CARTESIAN_POINT ( 'NONE', ( 10.03220454034422500, -20.32149963875677700, -23.67186603788616800 ) ) ; +#5642 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -30.66316004086981200, 28.85652737809770900 ) ) ; +#5643 = CARTESIAN_POINT ( 'NONE', ( 4.365806061798891400, -10.07543995705003500, -23.74196480098202100 ) ) ; +#5644 = CARTESIAN_POINT ( 'NONE', ( 10.13404763128906300, -12.91874300488560900, -25.00000000000000000 ) ) ; +#5645 = FACE_OUTER_BOUND ( 'NONE', #905, .T. ) ; +#5646 = CARTESIAN_POINT ( 'NONE', ( 38.10670237803445600, -30.00408906997915900, 24.29586602038923700 ) ) ; +#5647 = CARTESIAN_POINT ( 'NONE', ( 0.7635582168033742100, -9.075004385568467700, -18.60980986269182200 ) ) ; +#5648 = CARTESIAN_POINT ( 'NONE', ( 35.02726403213421900, -30.80024149543960700, 26.34220527904221100 ) ) ; +#5649 = CARTESIAN_POINT ( 'NONE', ( 44.09157152587820900, -8.452784834690840300, 16.38149653183795700 ) ) ; +#5650 = ORIENTED_EDGE ( 'NONE', *, *, #10610, .F. ) ; +#5651 = ORIENTED_EDGE ( 'NONE', *, *, #8141, .T. ) ; +#5652 = CARTESIAN_POINT ( 'NONE', ( 12.01804440007530100, -9.671567244655939500, -25.00000000000000000 ) ) ; +#5653 = PLANE ( 'NONE', #10479 ) ; +#5654 = CARTESIAN_POINT ( 'NONE', ( 20.14524060905971900, -30.65997548273784200, 28.85708890161801000 ) ) ; +#5655 = CARTESIAN_POINT ( 'NONE', ( 6.492892515965302800, -23.05633340895585100, -18.71341022993786000 ) ) ; +#5656 = CARTESIAN_POINT ( 'NONE', ( 7.220184644869458900, -30.40307588303798500, 24.55062565612748700 ) ) ; +#5657 = ORIENTED_EDGE ( 'NONE', *, *, #10929, .T. ) ; +#5658 = CARTESIAN_POINT ( 'NONE', ( 8.028070021591851500, -29.20330713101192500, 25.63906394087159800 ) ) ; +#5659 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999997200, -8.420726225214707500, -14.09015792523003400 ) ) ; +#5660 = CARTESIAN_POINT ( 'NONE', ( 39.87472254654458900, -29.84755262322662600, 22.03389262103351200 ) ) ; +#5661 = ORIENTED_EDGE ( 'NONE', *, *, #12380, .F. ) ; +#5662 = ORIENTED_EDGE ( 'NONE', *, *, #7474, .F. ) ; +#5663 = CARTESIAN_POINT ( 'NONE', ( 4.131177244642436200, -10.10761578289106100, 20.29183011283008400 ) ) ; +#5664 = CARTESIAN_POINT ( 'NONE', ( 39.95624828115713000, -28.01188937973181600, 13.03537412708534600 ) ) ; +#5665 = ORIENTED_EDGE ( 'NONE', *, *, #2306, .T. ) ; +#5666 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -20.52128825592935600, -9.023723636499077800 ) ) ; +#5667 = CARTESIAN_POINT ( 'NONE', ( 1.795438797635995300E-013, -5.969737039807091300, 14.90258572222745700 ) ) ; +#5668 = ORIENTED_EDGE ( 'NONE', *, *, #8654, .F. ) ; +#5669 = CARTESIAN_POINT ( 'NONE', ( 18.49683048351630500, -27.99874171312347900, 27.44664573134248900 ) ) ; +#5670 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457639500, -30.82655086342984400, 27.93782961424069500 ) ) ; +#5671 = CARTESIAN_POINT ( 'NONE', ( 33.46107544704289400, -15.85687985108670300, -25.18788841299461400 ) ) ; +#5672 = CARTESIAN_POINT ( 'NONE', ( 5.579107382745573500, -29.84294073586503900, 22.70077218102808900 ) ) ; +#5673 = CARTESIAN_POINT ( 'NONE', ( 44.47117565521729400, -11.05543370892318600, 8.184686135983705300 ) ) ; +#5674 = CARTESIAN_POINT ( 'NONE', ( 11.13253669798524600, -97.40634803306923600, 20.62259995189050300 ) ) ; +#5675 = CARTESIAN_POINT ( 'NONE', ( 10.96920584044813800, -30.17321878796966700, 26.90178936353430600 ) ) ; +#5676 = ORIENTED_EDGE ( 'NONE', *, *, #1041, .T. ) ; +#5677 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5678 = CARTESIAN_POINT ( 'NONE', ( 32.86134375266514200, -30.47349905280976800, 27.42194812943970900 ) ) ; +#5679 = CARTESIAN_POINT ( 'NONE', ( 14.42085310664191600, -12.50000000000000500, 20.72852947930755700 ) ) ; +#5680 = CARTESIAN_POINT ( 'NONE', ( 4.999919635099582900, -19.94033204978863700, 9.062596576393064000 ) ) ; +#5681 = CARTESIAN_POINT ( 'NONE', ( 31.64807104939826800, -30.86377504646850100, 27.81066347497850800 ) ) ; +#5682 = DIRECTION ( 'NONE', ( 0.2404117325126603500, 0.0000000000000000000, 0.9706710044449978800 ) ) ; +#5683 = CARTESIAN_POINT ( 'NONE', ( 13.25254745993457600, -30.80272953027655400, 27.78473378280145300 ) ) ; +#5684 = CARTESIAN_POINT ( 'NONE', ( 9.260027487933676600, -29.99988078917693100, 25.97039452825729100 ) ) ; +#5685 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5686 = CARTESIAN_POINT ( 'NONE', ( 38.80752522943448200, -10.66950505878487100, 23.37847362435757900 ) ) ; +#5687 = CARTESIAN_POINT ( 'NONE', ( 4.366822890060880100, -8.995474392191685100, -24.71044452430848200 ) ) ; +#5688 = VERTEX_POINT ( 'NONE', #7380 ) ; +#5689 = ADVANCED_FACE ( 'NONE', ( #7234 ), #344, .F. ) ; +#5690 = CARTESIAN_POINT ( 'NONE', ( 1.369570703525848200, -9.164689460399209500, -19.97917396485127000 ) ) ; +#5691 = CARTESIAN_POINT ( 'NONE', ( 37.71720649738208000, -30.97685427151398600, 23.78214840443962400 ) ) ; +#5692 = VERTEX_POINT ( 'NONE', #10678 ) ; +#5693 = EDGE_CURVE ( 'NONE', #8590, #1672, #11141, .T. ) ; +#5694 = CARTESIAN_POINT ( 'NONE', ( 34.59703230440165100, -30.03390912467840200, 26.60136004297542900 ) ) ; +#5695 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999997300, -97.04517183358916600, 16.23828164244106600 ) ) ; +#5696 = CARTESIAN_POINT ( 'NONE', ( 11.19769643299199100, -10.62639862591019300, -24.99999999999956300 ) ) ; +#5697 = AXIS2_PLACEMENT_3D ( 'NONE', #143, #10296, #1152 ) ; +#5698 = DIRECTION ( 'NONE', ( -0.9704395131763329200, 0.02183837816428609700, 0.2403543977239351000 ) ) ; +#5699 = CARTESIAN_POINT ( 'NONE', ( 15.07179187955478700, -23.83513885418290100, -26.62962210335770100 ) ) ; +#5700 = CARTESIAN_POINT ( 'NONE', ( 7.567190287890720200, -29.33420170754039800, 24.40323215221071300 ) ) ; +#5701 = CARTESIAN_POINT ( 'NONE', ( 5.292113102044372600, -31.50142312849591500, 23.17991222480312200 ) ) ; +#5702 = LINE ( 'NONE', #5505, #2995 ) ; +#5703 = CARTESIAN_POINT ( 'NONE', ( 42.40004006514231300, -9.543562310030917900, -22.01258744269544800 ) ) ; +#5704 = CARTESIAN_POINT ( 'NONE', ( 43.03590439071856400, -95.07596123493894400, 4.526934840690924700 ) ) ; +#5705 = ORIENTED_EDGE ( 'NONE', *, *, #6057, .F. ) ; +#5706 = VECTOR ( 'NONE', #12467, 1000.000000000000000 ) ; +#5707 = CARTESIAN_POINT ( 'NONE', ( 38.82471743059466000, -30.66002196790513800, 21.91718085817920800 ) ) ; +#5708 = ORIENTED_EDGE ( 'NONE', *, *, #3557, .F. ) ; +#5709 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -19.99999999999988600, 8.005331014629284400 ) ) ; +#5710 = CARTESIAN_POINT ( 'NONE', ( 5.004194506819187500, -22.32988315791644900, -11.58248430886937000 ) ) ; +#5711 = CARTESIAN_POINT ( 'NONE', ( 31.55782688733904000, -100.0000000000000100, 20.83750470492354600 ) ) ; +#5712 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 10.96446609406726200, -23.00000000000000000 ) ) ; +#5713 = EDGE_CURVE ( 'NONE', #11075, #2287, #8801, .T. ) ; +#5714 = DIRECTION ( 'NONE', ( -0.8646911947423455700, 0.005406040221159397200, -0.5022747380310723700 ) ) ; +#5715 = CARTESIAN_POINT ( 'NONE', ( 32.48648546155095600, -30.94505916284563800, 27.49084723631670700 ) ) ; +#5716 = CARTESIAN_POINT ( 'NONE', ( 19.96566260175782400, -19.87368928020428900, 23.25900218076811000 ) ) ; +#5717 = CIRCLE ( 'NONE', #5001, 3.189999999999995100 ) ; +#5718 = CARTESIAN_POINT ( 'NONE', ( 6.453400039237300800, -28.99244538117720200, 22.80674501178607400 ) ) ; +#5719 = CARTESIAN_POINT ( 'NONE', ( 44.47171355204663700, -11.05587446894709000, 8.090753103278260000 ) ) ; +#5720 = ORIENTED_EDGE ( 'NONE', *, *, #2904, .F. ) ; +#5721 = CARTESIAN_POINT ( 'NONE', ( 44.06938592402490700, -7.909250626588723200, -21.52549536666934000 ) ) ; +#5722 = CARTESIAN_POINT ( 'NONE', ( 11.13566358965201400, -30.79511459284951200, 26.95107178276506200 ) ) ; +#5723 = CARTESIAN_POINT ( 'NONE', ( 38.83593821018023100, -8.539663103207209000, -24.91057478002454300 ) ) ; +#5724 = CARTESIAN_POINT ( 'NONE', ( 32.86966655857567300, -30.71102460503424000, 27.40212358326471100 ) ) ; +#5725 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5726 = CARTESIAN_POINT ( 'NONE', ( 21.56918191455693200, -9.999999999999998200, 28.25125882508523700 ) ) ; +#5727 = CARTESIAN_POINT ( 'NONE', ( 30.25100220822156400, -21.28025442751857800, 29.99578934838033500 ) ) ; +#5728 = CARTESIAN_POINT ( 'NONE', ( 13.25130419203423300, -30.72492699781204800, 27.79633276099227900 ) ) ; +#5729 = AXIS2_PLACEMENT_3D ( 'NONE', #5631, #4589, #12690 ) ; +#5730 = CIRCLE ( 'NONE', #8374, 5.000000000000000900 ) ; +#5731 = CARTESIAN_POINT ( 'NONE', ( 9.475104312665569900, -31.05897367769663100, 25.85337302362808400 ) ) ; +#5732 = DIRECTION ( 'NONE', ( -0.8646995353985702500, -0.005415397997234572400, 0.5022602780889885400 ) ) ; +#5733 = CARTESIAN_POINT ( 'NONE', ( 6.596673030744412400, -8.797173677170622600, -24.94691912228025600 ) ) ; +#5734 = DIRECTION ( 'NONE', ( 0.9387291308708891600, -0.3446557976509103700, -1.195765006633093300E-016 ) ) ; +#5735 = CARTESIAN_POINT ( 'NONE', ( 37.92516830164768700, -29.60899570718282400, 24.24387684161895300 ) ) ; +#5736 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5737 = CARTESIAN_POINT ( 'NONE', ( 34.65375038265494800, -30.63862898760130400, 26.60160208165626700 ) ) ; +#5738 = CARTESIAN_POINT ( 'NONE', ( 32.36026243379880200, -30.59140334499393200, 27.60211081212940300 ) ) ; +#5739 = FACE_OUTER_BOUND ( 'NONE', #5271, .T. ) ; +#5740 = EDGE_LOOP ( 'NONE', ( #8434, #8446, #8554, #8569, #8714, #8755 ) ) ; +#5741 = CARTESIAN_POINT ( 'NONE', ( 7.675553663396665400, -30.78012603676628700, 24.63255213452365300 ) ) ; +#5742 = CARTESIAN_POINT ( 'NONE', ( 37.41385798727409200, -95.07596123493863200, 13.35561598479606000 ) ) ; +#5743 = CARTESIAN_POINT ( 'NONE', ( 41.15537051365254200, -11.23571604708995500, -22.46755997374653900 ) ) ; +#5744 = CARTESIAN_POINT ( 'NONE', ( 34.45841674829534900, -95.07596123493894400, 6.647750091010662400 ) ) ; +#5745 = AXIS2_PLACEMENT_3D ( 'NONE', #5783, #1754, #8890 ) ; +#5746 = LINE ( 'NONE', #1023, #11170 ) ; +#5747 = CARTESIAN_POINT ( 'NONE', ( 39.70876037145900700, -29.52898584387682100, 22.20302303148209700 ) ) ; +#5748 = CARTESIAN_POINT ( 'NONE', ( 8.679576140009583400, -12.60754707251364200, 23.02746293388844000 ) ) ; +#5749 = CARTESIAN_POINT ( 'NONE', ( 4.994849772730690400, -19.99142171096971100, -11.57125933579815100 ) ) ; +#5750 = ADVANCED_FACE ( 'NONE', ( #4797 ), #469, .T. ) ; +#5751 = CARTESIAN_POINT ( 'NONE', ( 36.41676201286038200, -30.67412564048985900, 25.48144511644540700 ) ) ; +#5752 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.500000000000000000, -22.99999999999999600 ) ) ; +#5753 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -97.57596123493894400, 0.0000000000000000000 ) ) ; +#5754 = CARTESIAN_POINT ( 'NONE', ( 44.39229640526660600, -7.445706252689239700, 17.82476228180846400 ) ) ; +#5755 = CARTESIAN_POINT ( 'NONE', ( 32.50819921752219000, -30.94719028235805400, 27.48190920033384500 ) ) ; +#5756 = CARTESIAN_POINT ( 'NONE', ( 6.011419523316841500, -30.23964820312614800, 23.10602427400628400 ) ) ; +#5757 = LINE ( 'NONE', #10108, #405 ) ; +#5758 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999907600, -9.999884515675717000, 8.077010422785409800 ) ) ; +#5759 = CARTESIAN_POINT ( 'NONE', ( 31.75972595764966400, -23.75486214514080900, -25.80036845219237300 ) ) ; +#5760 = CARTESIAN_POINT ( 'NONE', ( 11.15007746094844700, -30.32196885435123300, 27.00269084483521800 ) ) ; +#5761 = CARTESIAN_POINT ( 'NONE', ( 40.09010627036834500, -8.751330800636688800, -24.85433547337211000 ) ) ; +#5762 = CARTESIAN_POINT ( 'NONE', ( 32.86176855847715200, -30.97496317028505800, 27.33463968434618300 ) ) ; +#5763 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5764 = CARTESIAN_POINT ( 'NONE', ( 8.263071279850930000, -12.64718809329115200, 22.66839303731971400 ) ) ; +#5765 = CARTESIAN_POINT ( 'NONE', ( 0.5268992689224185600, -11.05484561371713600, -11.75066823473815000 ) ) ; +#5766 = CARTESIAN_POINT ( 'NONE', ( 13.35507902944130400, -30.82466636196470900, 27.81349046722400300 ) ) ; +#5767 = CARTESIAN_POINT ( 'NONE', ( 9.389798908500068800, -30.35563710781184100, 26.11032305767888700 ) ) ; +#5768 = VECTOR ( 'NONE', #292, 1000.000000000000000 ) ; +#5769 = CARTESIAN_POINT ( 'NONE', ( 44.40337227666393700, -7.429937287190970400, 17.81420743010512800 ) ) ; +#5770 = DIRECTION ( 'NONE', ( -0.3685279123275330100, 0.9009489668309371700, -0.2290810708063358000 ) ) ; +#5771 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#5772 = CARTESIAN_POINT ( 'NONE', ( 37.92517798819129400, -30.70725568983030100, 24.05023116290147600 ) ) ; +#5773 = CARTESIAN_POINT ( 'NONE', ( 25.60096348535356000, -23.47005105789329300, -27.37513343478143600 ) ) ; +#5774 = CARTESIAN_POINT ( 'NONE', ( 34.59418412891491100, -31.12830205282526600, 26.40302999999276100 ) ) ; +#5775 = CARTESIAN_POINT ( 'NONE', ( 33.97476280059262900, -30.18764429530426700, 26.93509805039467200 ) ) ; +#5776 = CIRCLE ( 'NONE', #7727, 3.189999999999995100 ) ; +#5777 = CARTESIAN_POINT ( 'NONE', ( 32.55539451127911100, -30.95182175802387500, 27.46234052473646900 ) ) ; +#5778 = CARTESIAN_POINT ( 'NONE', ( 10.38259225606760000, -20.48371218549835900, -23.94027831968546500 ) ) ; +#5779 = CARTESIAN_POINT ( 'NONE', ( 7.675525810798204100, -29.73972708098966700, 24.81599470298673500 ) ) ; +#5780 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -99.99999999999998600, 15.71726571334576200 ) ) ; +#5781 = CARTESIAN_POINT ( 'NONE', ( 6.121381524094001500, -30.62166641436758500, 21.75485388116655000 ) ) ; +#5782 = CARTESIAN_POINT ( 'NONE', ( 29.86132247220996300, -89.25259502760219700, 10.23840046695556400 ) ) ; +#5783 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -97.04531648070948800, 16.23785755017196300 ) ) ; +#5784 = EDGE_CURVE ( 'NONE', #9054, #450, #6416, .T. ) ; +#5785 = CARTESIAN_POINT ( 'NONE', ( 38.96853017192221800, -30.60231818933571200, 22.02382988880805600 ) ) ; +#5786 = VERTEX_POINT ( 'NONE', #546 ) ; +#5787 = ORIENTED_EDGE ( 'NONE', *, *, #6485, .T. ) ; +#5788 = APPROVAL ( #2166, 'UNSPECIFIED' ) ; +#5789 = CARTESIAN_POINT ( 'NONE', ( 20.19897118935759700, -9.999999999999994700, 28.36086946431094100 ) ) ; +#5790 = CARTESIAN_POINT ( 'NONE', ( 3.949751612136564100, -17.89972023942464200, -11.53704660288550300 ) ) ; +#5791 = VECTOR ( 'NONE', #12510, 1000.000000000000000 ) ; +#5792 = CARTESIAN_POINT ( 'NONE', ( 36.16814083012866400, -29.58662323266925800, 25.51740353844903800 ) ) ; +#5793 = CARTESIAN_POINT ( 'NONE', ( 30.22536640239615800, -30.95376382138832500, 28.19014991409403900 ) ) ; +#5794 = CARTESIAN_POINT ( 'NONE', ( 25.40774765352692200, -23.91468923920153600, -27.45890358475353900 ) ) ; +#5795 = CARTESIAN_POINT ( 'NONE', ( 44.87674532433347700, -6.117959608834634200, 16.48853624152952700 ) ) ; +#5796 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2581, #9721, #3601, #10726, #4610, #11746, #5655, #12709, #6695, #617, #7735, #1622, #8761, #2619, #9759, #3647, #10772, #4652, #11785, #5699, #12748, #6738, #665, #7778, #1666, #8800 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 6.938893903907228400E-018, 0.003024003384086555500, 0.006048006768173104000, 0.007560008460216377200, 0.009072010152259651200, 0.01058401184430292400, 0.01209601353634619600, 0.01512001692043275400, 0.01663201861247603700, 0.01814402030451932000, 0.02116802368860588200, 0.02268002538064916100, 0.02419202707269243300 ), + .UNSPECIFIED. ) ; +#5797 = CARTESIAN_POINT ( 'NONE', ( 10.54856762955633600, -94.71789415299960500, 16.79999317405647100 ) ) ; +#5798 = CARTESIAN_POINT ( 'NONE', ( 6.526749267181980200, -29.14954820310024200, 23.18744126669604500 ) ) ; +#5799 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000700, -8.819140343212051600, 8.061643774010089900 ) ) ; +#5800 = CARTESIAN_POINT ( 'NONE', ( 39.26192553391783900, -22.86979488649871300, -16.85876702025865000 ) ) ; +#5801 = CARTESIAN_POINT ( 'NONE', ( 11.24733660869524800, -30.97569338604458300, 26.93634337355659600 ) ) ; +#5802 = ORIENTED_EDGE ( 'NONE', *, *, #12927, .T. ) ; +#5803 = AXIS2_PLACEMENT_3D ( 'NONE', #9742, #6672, #1605 ) ; +#5804 = CARTESIAN_POINT ( 'NONE', ( 28.95942384541558600, -20.03890148772369900, 22.69747043191025800 ) ) ; +#5805 = CARTESIAN_POINT ( 'NONE', ( 39.54068353696809600, -10.95476208114552500, -24.14491299031751800 ) ) ; +#5806 = CARTESIAN_POINT ( 'NONE', ( 32.66601640704961800, -30.65691327221426100, 27.48673604398289100 ) ) ; +#5807 = ORIENTED_EDGE ( 'NONE', *, *, #5864, .T. ) ; +#5808 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 51.02052347080197600, 33.25956466485613600 ) ) ; +#5809 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -8.322854396240265200E-015, 25.00000000000000000 ) ) ; +#5810 = CARTESIAN_POINT ( 'NONE', ( 13.35440997848220200, -30.75874681631291500, 27.82440532025635300 ) ) ; +#5811 = CARTESIAN_POINT ( 'NONE', ( 9.596405688714925800, -31.16342318864293800, 25.84692418688656100 ) ) ; +#5812 = VERTEX_POINT ( 'NONE', #2505 ) ; +#5813 = CARTESIAN_POINT ( 'NONE', ( 7.420048825263163100, -21.90469144436784200, 15.97636781796787600 ) ) ; +#5814 = CARTESIAN_POINT ( 'NONE', ( 35.20383782689200600, -100.0000000000000100, 1.264554945771524600 ) ) ; +#5815 = VERTEX_POINT ( 'NONE', #2591 ) ; +#5816 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -8.719164002446193600, -13.01957408781299500 ) ) ; +#5817 = CARTESIAN_POINT ( 'NONE', ( 37.55974964827991900, -29.30295297290486200, 24.26565862453376700 ) ) ; +#5818 = ORIENTED_EDGE ( 'NONE', *, *, #9028, .T. ) ; +#5819 = CARTESIAN_POINT ( 'NONE', ( 31.24898654930309800, -21.82964598022752500, -25.94044007401786100 ) ) ; +#5820 = CARTESIAN_POINT ( 'NONE', ( 34.45625143330510600, -30.52215545352381600, 26.71848181874477000 ) ) ; +#5821 = CARTESIAN_POINT ( 'NONE', ( 36.26673996892831300, -29.55625154743549000, 25.45027580115094800 ) ) ; +#5822 = ORIENTED_EDGE ( 'NONE', *, *, #10509, .F. ) ; +#5823 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -97.57596123493894400, 11.50239124669685800 ) ) ; +#5824 = CARTESIAN_POINT ( 'NONE', ( 20.18719383516403500, -30.65917406624153000, 28.85723021296909600 ) ) ; +#5825 = ORIENTED_EDGE ( 'NONE', *, *, #9741, .F. ) ; +#5826 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2985, #1967, #12118, #6050, #13074, #7103 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 2.571113013157047300E-015, 0.004078304097303571900, 0.008156608194604573000 ), + .UNSPECIFIED. ) ; +#5827 = ORIENTED_EDGE ( 'NONE', *, *, #8408, .F. ) ; +#5828 = CARTESIAN_POINT ( 'NONE', ( 8.002766140433943000, -31.06974453720485800, 24.55234281055197700 ) ) ; +#5829 = CARTESIAN_POINT ( 'NONE', ( 19.39921314071522200, -23.47018159693996600, -27.37515645335455600 ) ) ; +#5830 = CARTESIAN_POINT ( 'NONE', ( 7.487531711067344300, -31.05420190132078100, 23.91215558537712500 ) ) ; +#5831 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, 9.663626396092146500, -22.99999999993460200 ) ) ; +#5832 = CARTESIAN_POINT ( 'NONE', ( 39.04129440503610500, -29.17710253174311300, 22.58198414756499200 ) ) ; +#5833 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.734723475976807600E-016 ) ) ; +#5834 = ORIENTED_EDGE ( 'NONE', *, *, #6817, .F. ) ; +#5835 = CARTESIAN_POINT ( 'NONE', ( 36.35016871789981300, -30.45323512318274000, 25.61665855364266900 ) ) ; +#5836 = ORIENTED_EDGE ( 'NONE', *, *, #12720, .T. ) ; +#5837 = CARTESIAN_POINT ( 'NONE', ( 4.729999708618324300, -9.830492209504559000, 25.00000000000000400 ) ) ; +#5838 = CARTESIAN_POINT ( 'NONE', ( 27.59587692901381900, -20.85475757482557000, -26.68709401166226100 ) ) ; +#5839 = VERTEX_POINT ( 'NONE', #8609 ) ; +#5840 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999889900, -4.999999999999992900, 16.06938735382972500 ) ) ; +#5841 = CARTESIAN_POINT ( 'NONE', ( 17.75907222685925600, -95.07596123493894400, 16.84199284340542100 ) ) ; +#5842 = CARTESIAN_POINT ( 'NONE', ( 6.493904495471739800, -30.67367466428327200, 23.18093897257415700 ) ) ; +#5843 = CARTESIAN_POINT ( 'NONE', ( 44.47187671358086900, -11.05590735884079300, 8.059409282136591900 ) ) ; +#5844 = CARTESIAN_POINT ( 'NONE', ( 43.24887926476635200, -8.800629358799838500, -23.00000000000000000 ) ) ; +#5845 = CARTESIAN_POINT ( 'NONE', ( 11.23416283406089100, -30.53252449837895100, 27.04381726284384900 ) ) ; +#5846 = CARTESIAN_POINT ( 'NONE', ( 9.707939908157982200, -19.36831300559752100, 19.19840732683685400 ) ) ; +#5847 = CARTESIAN_POINT ( 'NONE', ( 2.599411957859055100, -9.543039618570858800, -22.01215871103389100 ) ) ; +#5848 = EDGE_LOOP ( 'NONE', ( #3304, #3727, #4064, #4334, #4373, #4504, #4712, #5300 ) ) ; +#5849 = CARTESIAN_POINT ( 'NONE', ( 40.90425519051333900, -10.11454417788770900, -23.50001414836106400 ) ) ; +#5850 = CARTESIAN_POINT ( 'NONE', ( 32.66470339062872300, -30.88418347416358100, 27.44246801382768200 ) ) ; +#5851 = APPROVAL_DATE_TIME ( #8607, #10822 ) ; +#5852 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807600E-016 ) ) ; +#5853 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -90.07596123493895800, -4.350951650170483900 ) ) ; +#5854 = ORIENTED_EDGE ( 'NONE', *, *, #3990, .F. ) ; +#5855 = CARTESIAN_POINT ( 'NONE', ( 13.55996771271545300, -30.83891063050617400, 27.87455754328421900 ) ) ; +#5856 = CARTESIAN_POINT ( 'NONE', ( 9.477042857341652700, -30.54026466841150300, 26.14533030931041700 ) ) ; +#5857 = CARTESIAN_POINT ( 'NONE', ( 16.49953127096480500, -20.01384545781165200, 22.81373943744575400 ) ) ; +#5858 = CARTESIAN_POINT ( 'NONE', ( 25.83336499485023200, -100.0000000000000100, 6.630571736238752400 ) ) ; +#5859 = EDGE_CURVE ( 'NONE', #2958, #4031, #4014, .T. ) ; +#5860 = CARTESIAN_POINT ( 'NONE', ( 5.219877556254341600, -30.10938553870120400, 21.53870204212908100 ) ) ; +#5861 = CARTESIAN_POINT ( 'NONE', ( 37.92777658691602500, -30.38259110593961400, 24.41742106830846000 ) ) ; +#5862 = ORIENTED_EDGE ( 'NONE', *, *, #12470, .F. ) ; +#5863 = CARTESIAN_POINT ( 'NONE', ( 28.72271548423427800, -16.13266157543019800, -26.08135369930238300 ) ) ; +#5864 = EDGE_CURVE ( 'NONE', #10111, #8001, #4472, .T. ) ; +#5865 = CIRCLE ( 'NONE', #8210, 2.500000000000000900 ) ; +#5866 = CARTESIAN_POINT ( 'NONE', ( 34.41458931267167300, -31.08075228440581500, 26.53749605931277200 ) ) ; +#5867 = CARTESIAN_POINT ( 'NONE', ( 37.69788327722228900, -29.19050231994346900, 24.01393719111568000 ) ) ; +#5868 = ORIENTED_EDGE ( 'NONE', *, *, #12961, .F. ) ; +#5869 = CARTESIAN_POINT ( 'NONE', ( 32.62644288152623100, -30.95879337717958500, 27.43265123285678100 ) ) ; +#5870 = CARTESIAN_POINT ( 'NONE', ( 7.734619758851765800, -30.14647364102909300, 25.01119319328464400 ) ) ; +#5871 = CARTESIAN_POINT ( 'NONE', ( 17.99428496668142700, -19.72429161916178200, -26.71465498073536400 ) ) ; +#5872 = CARTESIAN_POINT ( 'NONE', ( 9.596720652449574700, -31.16440996083279200, 25.84625288299134000 ) ) ; +#5873 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -10.00002214682012400, -11.47197215777584300 ) ) ; +#5874 = CARTESIAN_POINT ( 'NONE', ( 42.93391579024977700, 10.75287675468457500, -24.66957895124933500 ) ) ; +#5875 = CARTESIAN_POINT ( 'NONE', ( 39.31348860823187900, -30.34750590865929400, 22.37281253064399400 ) ) ; +#5876 = FACE_OUTER_BOUND ( 'NONE', #1044, .T. ) ; +#5877 = CARTESIAN_POINT ( 'NONE', ( 37.04534784932299400, -31.44408489951670700, 22.94419078092632000 ) ) ; +#5878 = CARTESIAN_POINT ( 'NONE', ( 36.16768209442150800, -31.16486670575433500, 25.23848295967071900 ) ) ; +#5879 = EDGE_CURVE ( 'NONE', #2800, #10533, #1793, .T. ) ; +#5880 = CARTESIAN_POINT ( 'NONE', ( 8.906846006970162900, -9.332142743148940800, 25.00000000000000000 ) ) ; +#5881 = CARTESIAN_POINT ( 'NONE', ( 30.72454344902656600, -18.04368805342002300, -27.12677553882297600 ) ) ; +#5882 = EDGE_CURVE ( 'NONE', #5041, #9688, #9614, .T. ) ; +#5883 = CARTESIAN_POINT ( 'NONE', ( 44.47213595499957300, -11.05572809000078700, 8.005331014629273800 ) ) ; +#5884 = CARTESIAN_POINT ( 'NONE', ( 32.79398979570464700, -30.97520847991831500, 27.36097928239204400 ) ) ; +#5885 = CARTESIAN_POINT ( 'NONE', ( 20.21043809303151000, -7.494147448148559900, -33.02514502881589900 ) ) ; +#5886 = CARTESIAN_POINT ( 'NONE', ( 6.312316752217660600, -29.56609446069928600, 23.43794388878022900 ) ) ; +#5887 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#5888 = CARTESIAN_POINT ( 'NONE', ( 11.45078348915385100, -31.04543899037335900, 27.00130153803320400 ) ) ; +#5889 = FACE_OUTER_BOUND ( 'NONE', #7603, .T. ) ; +#5890 = CARTESIAN_POINT ( 'NONE', ( 7.563460668867513400, -19.51457062482754900, 16.60676189136586300 ) ) ; +#5891 = CARTESIAN_POINT ( 'NONE', ( 37.58006883961986200, -21.90477883531160700, 15.97616867277659700 ) ) ; +#5892 = CARTESIAN_POINT ( 'NONE', ( 42.37561434696390700, -9.276392095981586600, -23.66309956647515400 ) ) ; +#5893 = VERTEX_POINT ( 'NONE', #6944 ) ; +#5894 = CARTESIAN_POINT ( 'NONE', ( 32.25927784199243600, -30.64061016302482100, 27.63574761449318400 ) ) ; +#5895 = CARTESIAN_POINT ( 'NONE', ( 43.74657647263720900, -7.896962459763153100, 17.92297611438123200 ) ) ; +#5896 = CARTESIAN_POINT ( 'NONE', ( 13.56039828831896300, -30.80664506790267200, 27.88046558164092700 ) ) ; +#5897 = CARTESIAN_POINT ( 'NONE', ( 9.596085075238074000, -29.79605465572332100, 26.08854205718473200 ) ) ; +#5898 = CARTESIAN_POINT ( 'NONE', ( 10.11423849738448600, -13.36407974370878000, -24.99999999999999300 ) ) ; +#5899 = CARTESIAN_POINT ( 'NONE', ( 25.06873050441738100, -19.87468260212464000, 23.25870704130526800 ) ) ; +#5900 = CARTESIAN_POINT ( 'NONE', ( 37.02524707000382900, -94.72219806545260200, 15.44556310733240800 ) ) ; +#5901 = CARTESIAN_POINT ( 'NONE', ( 5.778371505257040600, -28.98403232083593300, 21.73713214224517600 ) ) ; +#5902 = CARTESIAN_POINT ( 'NONE', ( 37.38768944888313000, -29.26652025555417000, 24.37132127089445200 ) ) ; +#5903 = CARTESIAN_POINT ( 'NONE', ( 35.16383395442196800, -16.62292427042316900, -26.16780024006338200 ) ) ; +#5904 = LINE ( 'NONE', #8649, #11007 ) ; +#5905 = CARTESIAN_POINT ( 'NONE', ( 34.14982837436780000, -30.35921443117588200, 26.86736016014795700 ) ) ; +#5906 = CARTESIAN_POINT ( 'NONE', ( 38.56120718556444900, -28.98781365025350400, 22.77267619979987100 ) ) ; +#5907 = ADVANCED_FACE ( 'NONE', ( #4164 ), #7295, .T. ) ; +#5908 = CARTESIAN_POINT ( 'NONE', ( 32.94055871904724600, -30.98945208954535200, 27.29528872583241000 ) ) ; +#5909 = CARTESIAN_POINT ( 'NONE', ( 41.34704613065246500, -7.929704164938464700, 21.60365044908227700 ) ) ; +#5910 = CARTESIAN_POINT ( 'NONE', ( 8.348390447799758400, -31.14605229715664000, 24.80496605896758000 ) ) ; +#5911 = CARTESIAN_POINT ( 'NONE', ( 9.469862319124406000, -20.05689867734305700, -23.22988437275101600 ) ) ; +#5912 = ORIENTED_EDGE ( 'NONE', *, *, #230, .T. ) ; +#5913 = CARTESIAN_POINT ( 'NONE', ( 12.13863640647219100, -30.98182730605890400, 27.33221565039875100 ) ) ; +#5914 = CARTESIAN_POINT ( 'NONE', ( 9.900240406360179400, -18.27820881210459100, -24.44694279338529700 ) ) ; +#5915 = CARTESIAN_POINT ( 'NONE', ( 43.55188479908063200, 11.84765776320184600, -23.55188479908039100 ) ) ; +#5916 = CARTESIAN_POINT ( 'NONE', ( 38.57220389557477300, -29.00560285680367700, 22.80549776010085200 ) ) ; +#5917 = LINE ( 'NONE', #7826, #1487 ) ; +#5918 = CARTESIAN_POINT ( 'NONE', ( 18.19877191163576700, -23.32636080684558500, -27.26288346296568200 ) ) ; +#5919 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807600E-016 ) ) ; +#5920 = CARTESIAN_POINT ( 'NONE', ( 36.15895121787522700, -30.27379416612078000, 25.76033561368759800 ) ) ; +#5921 = CARTESIAN_POINT ( 'NONE', ( 10.22698763068566800, -12.16133538858552900, 24.37729670998093200 ) ) ; +#5922 = CARTESIAN_POINT ( 'NONE', ( 35.21058114554648500, -23.51383186870687300, -23.32432832805111300 ) ) ; +#5923 = CARTESIAN_POINT ( 'NONE', ( 6.240958563886439800, -95.39149166735433000, 12.92966260851841700 ) ) ; +#5924 = CARTESIAN_POINT ( 'NONE', ( 33.23742457555725600, -31.01793228899010300, 27.15782804777815000 ) ) ; +#5925 = CARTESIAN_POINT ( 'NONE', ( 7.878528171182936500, -7.530157800831079700, -29.16707855792383300 ) ) ; +#5926 = CARTESIAN_POINT ( 'NONE', ( 6.960896119952998600, -30.93839719390416600, 23.30136739078383800 ) ) ; +#5927 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999992200, -10.00001319383348900, 8.048972988813902800 ) ) ; +#5928 = CARTESIAN_POINT ( 'NONE', ( 8.370727640235418900, -99.99999999999998600, 19.03105684729295200 ) ) ; +#5929 = CARTESIAN_POINT ( 'NONE', ( 11.42977634266618400, -30.66582279979969500, 27.11621818588699300 ) ) ; +#5930 = CIRCLE ( 'NONE', #7042, 3.189999999999995100 ) ; +#5931 = CARTESIAN_POINT ( 'NONE', ( 6.148037658422804700, -19.66686960361958500, 13.90813161103732300 ) ) ; +#5932 = CARTESIAN_POINT ( 'NONE', ( 35.57498827374252700, -12.47902649275733300, 23.66650588704712600 ) ) ; +#5933 = CARTESIAN_POINT ( 'NONE', ( 32.29785285299215800, -9.982235803634720700, -25.00000000000894900 ) ) ; +#5934 = CARTESIAN_POINT ( 'NONE', ( 32.25983611820444700, -30.80104451519005300, 27.61271444770024900 ) ) ; +#5935 = CARTESIAN_POINT ( 'NONE', ( 10.47535453109944300, -37.55511539838413900, 16.68922105577454600 ) ) ; +#5936 = CARTESIAN_POINT ( 'NONE', ( 18.81765719163700700, -9.999999999999996400, 28.32632874172206500 ) ) ; +#5937 = CARTESIAN_POINT ( 'NONE', ( 13.66272156866364200, -30.83577576225348700, 27.90613145297361400 ) ) ; +#5938 = CARTESIAN_POINT ( 'NONE', ( 39.38139226322604700, -29.05972780217491900, 21.72417649530151700 ) ) ; +#5939 = VERTEX_POINT ( 'NONE', #7609 ) ; +#5940 = CARTESIAN_POINT ( 'NONE', ( 9.775383363766724900, -30.74451186792610700, 26.25428448561523700 ) ) ; +#5941 = VERTEX_POINT ( 'NONE', #1496 ) ; +#5942 = CARTESIAN_POINT ( 'NONE', ( 11.03520769389146800, -16.33353434074896500, -24.96289870028666900 ) ) ; +#5943 = CARTESIAN_POINT ( 'NONE', ( 41.37364548497353700, -11.18958327154646200, -22.16820188227150000 ) ) ; +#5944 = CARTESIAN_POINT ( 'NONE', ( 36.61764223563800200, -97.45109860756488700, 19.51289579225159800 ) ) ; +#5945 = CARTESIAN_POINT ( 'NONE', ( 5.785879778334488000, -30.45224796382226600, 21.54625807079651200 ) ) ; +#5946 = VECTOR ( 'NONE', #416, 1000.000000000000000 ) ; +#5947 = CARTESIAN_POINT ( 'NONE', ( 37.79351495530893600, -30.15073325517540300, 24.60850166803423300 ) ) ; +#5948 = CARTESIAN_POINT ( 'NONE', ( 40.00109850308541600, -17.23702762621133600, -18.67145859710501600 ) ) ; +#5949 = CARTESIAN_POINT ( 'NONE', ( 34.14982680653845600, -30.89955649658534000, 26.77209035449752500 ) ) ; +#5950 = CARTESIAN_POINT ( 'NONE', ( 33.78679656440357300, -89.20772034660433300, 11.03354182248334700 ) ) ; +#5951 = ORIENTED_EDGE ( 'NONE', *, *, #1711, .T. ) ; +#5952 = CARTESIAN_POINT ( 'NONE', ( 33.44031441959425900, -31.03692086372809200, 27.05808215582593900 ) ) ; +#5953 = CARTESIAN_POINT ( 'NONE', ( 40.38431433080532400, -7.939572092855748100, 22.71295825167915400 ) ) ; +#5954 = CARTESIAN_POINT ( 'NONE', ( 8.094950096343785300, -30.42980104481748100, 25.23834519219945300 ) ) ; +#5955 = FACE_BOUND ( 'NONE', #367, .T. ) ; +#5956 = CARTESIAN_POINT ( 'NONE', ( 9.837556503667013200, -16.62376964281201100, -26.16794930202578600 ) ) ; +#5957 = CARTESIAN_POINT ( 'NONE', ( 42.82730815522317900, 12.00000000000000000, -22.56546163104479400 ) ) ; +#5958 = EDGE_CURVE ( 'NONE', #7655, #1086, #9295, .T. ) ; +#5959 = CARTESIAN_POINT ( 'NONE', ( 39.40805880880397900, -30.01705318762566300, 22.66936241101047500 ) ) ; +#5960 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #11751, #10732, #540 ), + ( #12713, #6699, #622 ), + ( #7739, #1628, #8765 ), + ( #2624, #9765, #3651 ), + ( #10778, #4656, #11790 ), + ( #5704, #12752, #6741 ), + ( #668, #7782, #1669 ), + ( #8807, #2674, #9807 ), + ( #3686, #10817, #4706 ), + ( #11832, #5744, #12789 ), + ( #6783, #704, #7828 ), + ( #1710, #8844, #2716 ), + ( #9851, #3720, #10858 ), + ( #4750, #11871, #5782 ), + ( #12831, #6832, #748 ), + ( #7869, #1753, #8889 ), + ( #2757, #9892, #3765 ), + ( #10901, #4794, #11914 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 4.702964202423920000, 4.900491840518379000, 5.098019478612837200, 5.295547116707295400, 5.493074754801753600, 5.690602392896211700, 5.888130030990669900, 6.085657669085128100, 6.283185307179586200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7076851599719636800, 1.000000000000000000), + ( 1.000000000000000000, 0.7036464409744945800, 1.000000000000000000), + ( 1.000000000000000000, 0.6995687671181047800, 1.000000000000000000), + ( 1.000000000000000000, 0.6914945400838885500, 1.000000000000000000), + ( 1.000000000000000000, 0.6874980667938475100, 1.000000000000000000), + ( 1.000000000000000000, 0.6797498133379200600, 1.000000000000000000), + ( 1.000000000000000000, 0.6759982929556487300, 1.000000000000000000), + ( 1.000000000000000000, 0.6689019988224087500, 1.000000000000000000), + ( 1.000000000000000000, 0.6655575263462990600, 1.000000000000000000), + ( 1.000000000000000000, 0.6594271385700515300, 1.000000000000000000), + ( 1.000000000000000000, 0.6566415426773898300, 1.000000000000000000), + ( 1.000000000000000000, 0.6517610593498380800, 1.000000000000000000), + ( 1.000000000000000000, 0.6496664724627182500, 1.000000000000000000), + ( 1.000000000000000000, 0.6462710433719752700, 1.000000000000000000), + ( 1.000000000000000000, 0.6449704378542318000, 1.000000000000000000), + ( 1.000000000000000000, 0.6432286554914743400, 1.000000000000000000), + ( 1.000000000000000000, 0.6427869131628413100, 1.000000000000000000), + ( 1.000000000000000000, 0.6427876096865418100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#5961 = ORIENTED_EDGE ( 'NONE', *, *, #1320, .F. ) ; +#5962 = CARTESIAN_POINT ( 'NONE', ( 16.09110267340646800, -10.00000000000000000, 27.97104690260804500 ) ) ; +#5963 = VERTEX_POINT ( 'NONE', #9638 ) ; +#5964 = CARTESIAN_POINT ( 'NONE', ( 36.04670211516653200, -31.05736408348816000, 25.46094281045314400 ) ) ; +#5965 = CARTESIAN_POINT ( 'NONE', ( 36.34049804706344100, -20.56059053079285400, -21.61097967647983600 ) ) ; +#5966 = ORIENTED_EDGE ( 'NONE', *, *, #11912, .T. ) ; +#5967 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -95.19591800739856100, 10.91472003790389400 ) ) ; +#5968 = CARTESIAN_POINT ( 'NONE', ( 33.66045888198876000, -31.05629198756647800, 26.94232806837737500 ) ) ; +#5969 = CARTESIAN_POINT ( 'NONE', ( 18.75477356754364800, -7.687750516303218300, -32.90106338041535800 ) ) ; +#5970 = CARTESIAN_POINT ( 'NONE', ( 6.428098970072408500, -29.99235741387989100, 23.77517758060948000 ) ) ; +#5971 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000700, -8.819419197117556000, 8.037303842478300100 ) ) ; +#5972 = CARTESIAN_POINT ( 'NONE', ( 32.05503684592162000, -30.74306884839995700, 27.69370174242573400 ) ) ; +#5973 = CARTESIAN_POINT ( 'NONE', ( -1.500922423586149200E-014, -95.07596123493894400, 22.49881262457336800 ) ) ; +#5974 = CARTESIAN_POINT ( 'NONE', ( 11.45084030558850500, -30.29999372478914300, 27.13261769508268600 ) ) ; +#5975 = ORIENTED_EDGE ( 'NONE', *, *, #9324, .T. ) ; +#5976 = ADVANCED_FACE ( 'NONE', ( #1180 ), #8977, .T. ) ; +#5977 = CARTESIAN_POINT ( 'NONE', ( 5.289551050334671900, -19.83022758070712800, 11.01355586412016900 ) ) ; +#5978 = ORIENTED_EDGE ( 'NONE', *, *, #7694, .F. ) ; +#5979 = ORIENTED_EDGE ( 'NONE', *, *, #6822, .T. ) ; +#5980 = CARTESIAN_POINT ( 'NONE', ( 33.19100792792482200, -9.750579588820851700, -25.00000000000000000 ) ) ; +#5981 = CARTESIAN_POINT ( 'NONE', ( 32.05554449756421300, -30.66022125219867400, 27.70392084398038100 ) ) ; +#5982 = CARTESIAN_POINT ( 'NONE', ( 5.573946661098893300, -31.35565798631363800, 10.19840438910381400 ) ) ; +#5983 = CARTESIAN_POINT ( 'NONE', ( 3.022905945572898800, -9.594206958099187300, 21.99780590795995000 ) ) ; +#5984 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -5.000000000000000900, 22.50000000000000400 ) ) ; +#5985 = ORIENTED_EDGE ( 'NONE', *, *, #2286, .T. ) ; +#5986 = CARTESIAN_POINT ( 'NONE', ( 13.66314593427394200, -30.82086104093084000, 27.90888495468596300 ) ) ; +#5987 = CARTESIAN_POINT ( 'NONE', ( 9.824917077074053000, -30.02791494960397100, 26.29806166657422000 ) ) ; +#5988 = CARTESIAN_POINT ( 'NONE', ( 0.5278691658340004500, -11.05573833166792000, -11.53187062879840900 ) ) ; +#5989 = CARTESIAN_POINT ( 'NONE', ( 5.116607116334051000, -28.91905668512205500, 15.44936631783599000 ) ) ; +#5990 = CARTESIAN_POINT ( 'NONE', ( 29.16478708490378900, -94.74409437234361100, 18.35212678814919200 ) ) ; +#5991 = ORIENTED_EDGE ( 'NONE', *, *, #10226, .F. ) ; +#5992 = CARTESIAN_POINT ( 'NONE', ( 5.222416111002847700, -29.32124101854982700, 21.74606083146702700 ) ) ; +#5993 = CARTESIAN_POINT ( 'NONE', ( 37.40447264179968600, -31.05320141738992800, 24.07276201183869400 ) ) ; +#5994 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3180, #12141, #3357, #3050, #2762, #7916, #7875, #7832, #2721, #2680, #2630, #2588 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( -5.999999999791428200E-008, 0.003183815850534967100, 0.006367691701069932100, 0.007959629626337413500, 0.009551567551604897600, 0.01273544340213987100 ), + .UNSPECIFIED. ) ; +#5995 = ORIENTED_EDGE ( 'NONE', *, *, #6223, .F. ) ; +#5996 = CARTESIAN_POINT ( 'NONE', ( 24.84990777206995100, -33.18274856558007700, 28.41225594090786500 ) ) ; +#5997 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8416, #7384, #10433, #4308, #11459, #5339, #12426, #6376, #328, #7432, #1326, #8462, #2324, #9469 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.003835240063735742600, 0.005752860095603613800, 0.007670480127471485100, 0.01150572019120722800, 0.01342334022307509900, 0.01534096025494296700 ), + .UNSPECIFIED. ) ; +#5998 = CARTESIAN_POINT ( 'NONE', ( 34.03461834070630200, -30.20565274436347300, 26.90511945019101600 ) ) ; +#5999 = CARTESIAN_POINT ( 'NONE', ( 38.25514486741480600, -7.957322465310634900, 24.70837479998200300 ) ) ; +#6000 = ORIENTED_EDGE ( 'NONE', *, *, #6716, .T. ) ; +#6001 = CARTESIAN_POINT ( 'NONE', ( 8.337362850685522600, -29.47850152128177500, 25.11269173847885100 ) ) ; +#6002 = VERTEX_POINT ( 'NONE', #12633 ) ; +#6003 = CARTESIAN_POINT ( 'NONE', ( 12.91002001127659900, -10.43015741754776600, -25.07584835866554200 ) ) ; +#6004 = CARTESIAN_POINT ( 'NONE', ( 24.90395493491608600, -27.96340410149400700, 27.45756719153379800 ) ) ; +#6005 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#6006 = ORIENTED_EDGE ( 'NONE', *, *, #3987, .T. ) ; +#6007 = CARTESIAN_POINT ( 'NONE', ( 38.54503864222364500, -30.79601236104663900, 22.48837903480142600 ) ) ; +#6008 = CARTESIAN_POINT ( 'NONE', ( 14.74599086734930300, -9.999999999999996400, 27.65021518371798600 ) ) ; +#6009 = CARTESIAN_POINT ( 'NONE', ( 36.00551152944795800, -29.93966013396166300, 25.78916556639555700 ) ) ; +#6010 = EDGE_CURVE ( 'NONE', #6802, #8500, #1685, .T. ) ; +#6011 = CARTESIAN_POINT ( 'NONE', ( 3.844629486347477700, -11.23571604708997100, -22.46755997374653900 ) ) ; +#6012 = CARTESIAN_POINT ( 'NONE', ( 39.67337476142596100, -17.97093322493249100, -18.44912248692029200 ) ) ; +#6013 = CARTESIAN_POINT ( 'NONE', ( 38.36489895712977500, -94.52969920337913800, 7.491482714604655900 ) ) ; +#6014 = CARTESIAN_POINT ( 'NONE', ( 33.66957733557287500, -31.05709112742568900, 26.93751383575215300 ) ) ; +#6015 = CARTESIAN_POINT ( 'NONE', ( -0.9139696420718994600, -7.847188407628475900, -14.46709690233745100 ) ) ; +#6016 = ADVANCED_FACE ( 'NONE', ( #11662, #3836 ), #7650, .F. ) ; +#6017 = LINE ( 'NONE', #6331, #960 ) ; +#6018 = CARTESIAN_POINT ( 'NONE', ( 6.982461239279831300, -29.11437429726778000, 23.60985095445298400 ) ) ; +#6019 = CARTESIAN_POINT ( 'NONE', ( 44.47206030675180000, -11.05580488157672300, 8.020188343831673400 ) ) ; +#6020 = CARTESIAN_POINT ( 'NONE', ( 32.05537938894133300, -30.87598625809319900, 27.66780686719905400 ) ) ; +#6021 = EDGE_LOOP ( 'NONE', ( #12360, #2940, #4209, #5512, #5013 ) ) ; +#6022 = CARTESIAN_POINT ( 'NONE', ( 10.26057644352793500, -12.19623197613733500, 24.38134862614858300 ) ) ; +#6023 = CARTESIAN_POINT ( 'NONE', ( 11.52982826707609700, -30.76050815968152800, 27.14139665277000900 ) ) ; +#6024 = CARTESIAN_POINT ( 'NONE', ( 5.040127809553013100, -19.93376372055654500, 9.178989840190732600 ) ) ; +#6025 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000007100, -12.50000000000000000, -11.04206326889650700 ) ) ; +#6026 = CARTESIAN_POINT ( 'NONE', ( 33.59574993300177700, -10.99293900890996400, -25.05536783788588200 ) ) ; +#6027 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -97.04517183358045400, 16.23828164246660000 ) ) ; +#6028 = CARTESIAN_POINT ( 'NONE', ( 12.14880195018307400, -10.00000000000000000, 26.73569495166160300 ) ) ; +#6029 = CARTESIAN_POINT ( 'NONE', ( 5.004090820988172300, -22.33035672956467000, -11.58704642397699100 ) ) ; +#6030 = CARTESIAN_POINT ( 'NONE', ( 13.66272053382880200, -30.80702009464588500, 27.91120155153407400 ) ) ; +#6031 = FACE_OUTER_BOUND ( 'NONE', #12750, .T. ) ; +#6032 = CARTESIAN_POINT ( 'NONE', ( 10.00941148139623800, -31.01523987053547800, 26.24027621209512500 ) ) ; +#6033 = CARTESIAN_POINT ( 'NONE', ( 3.076594241589654600, -9.620168812813044900, 22.10650361888945500 ) ) ; +#6034 = EDGE_LOOP ( 'NONE', ( #6785, #7294, #8085 ) ) ; +#6035 = CARTESIAN_POINT ( 'NONE', ( 36.40905329552549600, -15.83891505309123800, -25.00000000002585700 ) ) ; +#6036 = CARTESIAN_POINT ( 'NONE', ( 24.99999999991693800, -93.17319105032913700, 22.83432234620768900 ) ) ; +#6037 = CARTESIAN_POINT ( 'NONE', ( 6.069872571600727800, -30.57927835414772100, 21.58618975977755400 ) ) ; +#6038 = CARTESIAN_POINT ( 'NONE', ( 37.38445214637223300, -29.88937985594426300, 24.85313032148977900 ) ) ; +#6039 = CARTESIAN_POINT ( 'NONE', ( 24.98146071973762300, -28.77816371652370000, 29.18890308861619700 ) ) ; +#6040 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1800, #10829, #9945, #3820 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.1055737060402211900, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#6041 = EDGE_CURVE ( 'NONE', #450, #6622, #3527, .T. ) ; +#6042 = CARTESIAN_POINT ( 'NONE', ( 34.06324429790988300, -30.71728689562795400, 26.87640990967545900 ) ) ; +#6043 = CARTESIAN_POINT ( 'NONE', ( 28.82877084913504000, -27.29202009547218200, 21.46266711380987500 ) ) ; +#6044 = FACE_OUTER_BOUND ( 'NONE', #4210, .T. ) ; +#6045 = CARTESIAN_POINT ( 'NONE', ( 33.69171950212745500, -31.05902627363371200, 26.92579192698388700 ) ) ; +#6046 = AXIS2_PLACEMENT_3D ( 'NONE', #18, #1028, #8153 ) ; +#6047 = CARTESIAN_POINT ( 'NONE', ( 8.327162169205328400, -30.71658376863363700, 25.26043332407493500 ) ) ; +#6048 = CARTESIAN_POINT ( 'NONE', ( 9.842778526994887800, -10.02440554626943800, 24.99569664371376700 ) ) ; +#6049 = CARTESIAN_POINT ( 'NONE', ( -2.168404344971008500E-015, -10.00001763796039500, 7.987765485217860100 ) ) ; +#6050 = CARTESIAN_POINT ( 'NONE', ( 39.72374310930182200, -13.54323068083307800, -22.63479153235197900 ) ) ; +#6051 = CARTESIAN_POINT ( 'NONE', ( 39.01053226628947400, -29.77364744885535700, 23.19297771287456200 ) ) ; +#6052 = CARTESIAN_POINT ( 'NONE', ( 10.89685545868295200, -9.999999999999996400, 26.14205243216052600 ) ) ; +#6053 = CARTESIAN_POINT ( 'NONE', ( 36.04716465030965400, -30.75437398990655100, 25.70627751227805600 ) ) ; +#6054 = EDGE_CURVE ( 'NONE', #11277, #7598, #6247, .T. ) ; +#6055 = CARTESIAN_POINT ( 'NONE', ( 27.10362946165476200, -25.65044180575750900, 22.13088491447674900 ) ) ; +#6056 = CARTESIAN_POINT ( 'NONE', ( 39.75993104127940800, -22.65785293413943400, -14.77371006776222700 ) ) ; +#6057 = EDGE_CURVE ( 'NONE', #6622, #1233, #12485, .T. ) ; +#6058 = ORIENTED_EDGE ( 'NONE', *, *, #4161, .F. ) ; +#6059 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -95.45536033962093800, 3.667068596692398600 ) ) ; +#6060 = CARTESIAN_POINT ( 'NONE', ( 33.72500617295020200, -31.06192538575124100, 26.90811038916737300 ) ) ; +#6061 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -90.07596123493894400, -4.350951650170821400 ) ) ; +#6062 = CARTESIAN_POINT ( 'NONE', ( 4.501960007066065500, -10.00000000000000000, -24.44416439029043900 ) ) ; +#6063 = CARTESIAN_POINT ( 'NONE', ( 6.538322040130353200, -30.29288179732569500, 23.82543591887843300 ) ) ; +#6064 = FACE_BOUND ( 'NONE', #12626, .T. ) ; +#6065 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000002100, -10.00003324147321800, 8.013891561255992000 ) ) ; +#6066 = CARTESIAN_POINT ( 'NONE', ( 31.74809486150684300, -30.74118435971979600, 27.79436693819599600 ) ) ; +#6067 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6068 = CARTESIAN_POINT ( 'NONE', ( 11.54279480075892100, -30.38476947653403900, 27.17797864107175000 ) ) ; +#6069 = CARTESIAN_POINT ( 'NONE', ( 11.71195609433363800, -12.50000000000000000, -19.74919701371357000 ) ) ; +#6070 = PLANE ( 'NONE', #6046 ) ; +#6071 = CARTESIAN_POINT ( 'NONE', ( 8.539034773588216600, -10.00000000000000000, 24.70702785189976300 ) ) ; +#6072 = CARTESIAN_POINT ( 'NONE', ( 4.994883636847429600, -19.99164522795980400, -11.57486846446384400 ) ) ; +#6073 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344970500, 27.93780948130441300 ) ) ; +#6074 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 51.02052347080197600, -11.74043533514386100 ) ) ; +#6075 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6076 = CARTESIAN_POINT ( 'NONE', ( 9.966973558990107000, -30.35496600544107400, 26.43036000515684200 ) ) ; +#6077 = SPHERICAL_SURFACE ( 'NONE', #5745, 2.500000000000000000 ) ; +#6078 = DIRECTION ( 'NONE', ( 0.8436717434443229400, -0.5368593757341084700, 0.0000000000000000000 ) ) ; +#6079 = CARTESIAN_POINT ( 'NONE', ( 42.16542766386824300, -9.561546043064577600, -22.35952791239957400 ) ) ; +#6080 = CARTESIAN_POINT ( 'NONE', ( 43.80318495619317800, -8.270162586375782600, 17.29210535358753700 ) ) ; +#6081 = CARTESIAN_POINT ( 'NONE', ( 5.008440080766993300, -29.67417701531934400, 21.74726104537394300 ) ) ; +#6082 = CARTESIAN_POINT ( 'NONE', ( 37.28959457848574000, -30.84311136942398300, 24.58502789173282800 ) ) ; +#6083 = CARTESIAN_POINT ( 'NONE', ( 21.71713062019401600, -33.21268289844543600, 28.40697771038785300 ) ) ; +#6084 = ADVANCED_FACE ( 'NONE', ( #8671 ), #10165, .F. ) ; +#6085 = CARTESIAN_POINT ( 'NONE', ( 33.83892885895507900, -30.22303632698217900, 26.99663793590306700 ) ) ; +#6086 = CARTESIAN_POINT ( 'NONE', ( 35.28865944371855100, -28.77563869528435300, 26.20272658497990600 ) ) ; +#6087 = LINE ( 'NONE', #425, #5768 ) ; +#6088 = CARTESIAN_POINT ( 'NONE', ( 33.80319469225502600, -31.06866003288977400, 26.86615313732755100 ) ) ; +#6089 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -90.07596123493894400, -4.350951650170763700 ) ) ; +#6090 = CARTESIAN_POINT ( 'NONE', ( 8.387803485209016000, -29.80362169666957000, 25.34458079639149700 ) ) ; +#6091 = CARTESIAN_POINT ( 'NONE', ( 10.26149944716458500, -11.47964268093144600, 24.73909907354399400 ) ) ; +#6092 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.819419194389521300, 8.037304180196560600 ) ) ; +#6093 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -8.819792439160773200, -11.59673175802750400 ) ) ; +#6094 = CARTESIAN_POINT ( 'NONE', ( 39.09617562162772900, -30.83427900096195300, 23.83329399248170000 ) ) ; +#6095 = AXIS2_PLACEMENT_3D ( 'NONE', #2039, #2083, #2293 ) ; +#6096 = CARTESIAN_POINT ( 'NONE', ( 38.39088455299950200, -30.83207500984909200, 22.87217444328110700 ) ) ; +#6097 = CARTESIAN_POINT ( 'NONE', ( 7.433279160931916400, -9.999999999999996400, 23.86571796223843800 ) ) ; +#6098 = VECTOR ( 'NONE', #3535, 1000.000000000000000 ) ; +#6099 = CARTESIAN_POINT ( 'NONE', ( 35.75619131954352500, -29.71992392323123900, 25.84717742771986000 ) ) ; +#6100 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -21.83180544453004800, -11.26204952430953700 ) ) ; +#6101 = CARTESIAN_POINT ( 'NONE', ( 39.98199752250310000, -20.04002935338547400, -12.43628651198135900 ) ) ; +#6102 = CARTESIAN_POINT ( 'NONE', ( 39.99999999998448900, -90.82477459648326600, -3.049166625010109500 ) ) ; +#6103 = CARTESIAN_POINT ( 'NONE', ( 33.96162462727920000, -31.08197793942995400, 26.77939031996228500 ) ) ; +#6104 = CARTESIAN_POINT ( 'NONE', ( 37.08881428511702400, -7.965204017137810200, 25.59438319123720600 ) ) ; +#6105 = CARTESIAN_POINT ( 'NONE', ( 14.11160146258214900, -20.80077021978446800, -25.72084097664912200 ) ) ; +#6106 = CARTESIAN_POINT ( 'NONE', ( 6.990573358476498600, -29.18952416624237500, 23.72290125341610400 ) ) ; +#6107 = CARTESIAN_POINT ( 'NONE', ( 31.74740882569716000, -30.82402811298411300, 27.78080741276253500 ) ) ; +#6108 = CARTESIAN_POINT ( 'NONE', ( 0.9084284741214397900, -8.452784834690261200, 16.38149653183790000 ) ) ; +#6109 = CARTESIAN_POINT ( 'NONE', ( 11.73505605921086200, -30.90713684197044100, 27.18749976563168100 ) ) ; +#6110 = ORIENTED_EDGE ( 'NONE', *, *, #7617, .F. ) ; +#6111 = CARTESIAN_POINT ( 'NONE', ( 32.65371374435567000, -100.0000000000000100, -35.71244580412996300 ) ) ; +#6112 = EDGE_CURVE ( 'NONE', #10945, #4714, #5917, .T. ) ; +#6113 = CARTESIAN_POINT ( 'NONE', ( 7.375890126578463300, -11.02465411127649700, 23.71332742360213400 ) ) ; +#6114 = CARTESIAN_POINT ( 'NONE', ( 5.414691017750500100, -10.00000000000000000, 21.97096877852870400 ) ) ; +#6115 = CARTESIAN_POINT ( 'NONE', ( 3.949687689027416400, -17.89971763890674300, -11.54009716098575900 ) ) ; +#6116 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344970900, 27.93780948130440600 ) ) ; +#6117 = CARTESIAN_POINT ( 'NONE', ( 40.95366574217660400, -18.09266851564670000, -11.41292155677039600 ) ) ; +#6118 = EDGE_CURVE ( 'NONE', #4849, #9827, #7823, .T. ) ; +#6119 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 9.500000000000000000, 1.981438871123700300 ) ) ; +#6120 = CARTESIAN_POINT ( 'NONE', ( 10.40533179221878500, -31.12685009555930900, 26.40385420867355400 ) ) ; +#6121 = CARTESIAN_POINT ( 'NONE', ( 36.71851553603307400, -100.0000000000000300, -1.650587127058554800 ) ) ; +#6122 = CARTESIAN_POINT ( 'NONE', ( 0.8450799996949920300, -7.781481582010833600, -21.43596316075076300 ) ) ; +#6123 = CARTESIAN_POINT ( 'NONE', ( 43.39322051692689500, -8.675156088330647100, 19.16447855364242200 ) ) ; +#6124 = VERTEX_POINT ( 'NONE', #9850 ) ; +#6125 = CARTESIAN_POINT ( 'NONE', ( 6.071568048574545400, -28.88593925189796300, 21.88494458188985100 ) ) ; +#6126 = AXIS2_PLACEMENT_3D ( 'NONE', #4692, #9791, #2660 ) ; +#6127 = CARTESIAN_POINT ( 'NONE', ( 37.03899466801875900, -29.52176025387778000, 24.87305348327921500 ) ) ; +#6128 = VERTEX_POINT ( 'NONE', #11036 ) ; +#6129 = CARTESIAN_POINT ( 'NONE', ( 5.651693792288905400, -28.83516963390314200, 20.55738878261863100 ) ) ; +#6130 = CARTESIAN_POINT ( 'NONE', ( 33.86696880931496200, -30.62299011296234500, 26.98807699932022800 ) ) ; +#6131 = CARTESIAN_POINT ( 'NONE', ( 34.73518257893957200, -20.70415396077922700, 19.47747828579836600 ) ) ; +#6132 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -90.07596123493894400, -4.350951650170706800 ) ) ; +#6133 = EDGE_LOOP ( 'NONE', ( #1130, #10622, #7917, #5316, #5661 ) ) ; +#6134 = ORIENTED_EDGE ( 'NONE', *, *, #8654, .T. ) ; +#6135 = CARTESIAN_POINT ( 'NONE', ( 8.699764223020180200, -31.05134254399921500, 25.25650467863483000 ) ) ; +#6136 = CARTESIAN_POINT ( 'NONE', ( 38.29095321574021000, -7.538449311261580000, -28.27874517589439300 ) ) ; +#6137 = CARTESIAN_POINT ( 'NONE', ( 0.5319334722966933000, -11.04688883281638200, 8.558461105763289100 ) ) ; +#6138 = CARTESIAN_POINT ( 'NONE', ( 44.47199776664882600, -11.02340367413955100, -12.42365451893801900 ) ) ; +#6139 = CARTESIAN_POINT ( 'NONE', ( 34.83907054267859800, -32.10897044986845800, 24.20058394599847400 ) ) ; +#6140 = EDGE_CURVE ( 'NONE', #9510, #10310, #11349, .T. ) ; +#6141 = ORIENTED_EDGE ( 'NONE', *, *, #3139, .F. ) ; +#6142 = CARTESIAN_POINT ( 'NONE', ( 38.57041354442314000, -29.41472243995565700, 23.42591696384640100 ) ) ; +#6143 = CARTESIAN_POINT ( 'NONE', ( 32.44765160622102200, -10.37656499440785400, -25.06425231094196700 ) ) ; +#6144 = VERTEX_POINT ( 'NONE', #10857 ) ; +#6145 = CARTESIAN_POINT ( 'NONE', ( 35.89383401492872100, -30.53369581326699800, 25.91012441988318900 ) ) ; +#6146 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 12.00000000000000000, 22.50000000000000700 ) ) ; +#6147 = CARTESIAN_POINT ( 'NONE', ( 41.05091894977093100, -17.90019913087193300, -11.58377401035116700 ) ) ; +#6148 = ORIENTED_EDGE ( 'NONE', *, *, #8878, .T. ) ; +#6149 = ORIENTED_EDGE ( 'NONE', *, *, #7866, .T. ) ; +#6150 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#6151 = CARTESIAN_POINT ( 'NONE', ( 34.60182860664191700, -7.978647601650882500, 27.10565012792713400 ) ) ; +#6152 = CARTESIAN_POINT ( 'NONE', ( 3.509289510067040500, -17.01857902013397700, 8.005331014629284400 ) ) ; +#6153 = ADVANCED_FACE ( 'NONE', ( #550 ), #2897, .F. ) ; +#6154 = CARTESIAN_POINT ( 'NONE', ( 6.884759991063135400, -30.68063556880189300, 23.83146843236680800 ) ) ; +#6155 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000700, -8.819624696646048500, 8.006851404028319400 ) ) ; +#6156 = CARTESIAN_POINT ( 'NONE', ( 31.64591031101123200, -30.74593529956396800, 27.82617728731672800 ) ) ; +#6157 = CARTESIAN_POINT ( 'NONE', ( 0.3674599729416057100, -6.910373148725272900, 16.78395334226040700 ) ) ; +#6158 = CARTESIAN_POINT ( 'NONE', ( 11.73102328259350600, -30.57374286218857100, 27.25566474406619100 ) ) ; +#6159 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999997200, -100.0000000000000100, -26.47069336410935800 ) ) ; +#6160 = CARTESIAN_POINT ( 'NONE', ( 31.35521743957901800, -15.70027611264038600, 23.99488752385357800 ) ) ; +#6161 = VERTEX_POINT ( 'NONE', #2936 ) ; +#6162 = ORIENTED_EDGE ( 'NONE', *, *, #1145, .F. ) ; +#6163 = CARTESIAN_POINT ( 'NONE', ( 8.053265607868906900, -12.65690218456407100, 22.48671392898969800 ) ) ; +#6164 = CARTESIAN_POINT ( 'NONE', ( 5.003582112588939700, -22.33271885441171600, -11.60985659188402000 ) ) ; +#6165 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3944, #9812, #3725, #3607 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001872366595206103200 ), + .UNSPECIFIED. ) ; +#6166 = ORIENTED_EDGE ( 'NONE', *, *, #11273, .T. ) ; +#6167 = CARTESIAN_POINT ( 'NONE', ( 8.573356551626433800, -12.63134556858695000, 22.93658489938117700 ) ) ; +#6168 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6169 = CARTESIAN_POINT ( 'NONE', ( 10.34553815290720300, -30.56926731872009700, 26.61461588183238500 ) ) ; +#6170 = CARTESIAN_POINT ( 'NONE', ( 33.30850665730462600, -12.50000000000001100, 18.87585892611956200 ) ) ; +#6171 = CARTESIAN_POINT ( 'NONE', ( 2.504369967205454900, -10.44154865655180400, -20.92187104639650700 ) ) ; +#6172 = CARTESIAN_POINT ( 'NONE', ( 41.13786254746062100, -11.43580060104652500, 18.68032453105991700 ) ) ; +#6173 = CARTESIAN_POINT ( 'NONE', ( 5.141263382785476600, -30.02625916554560300, 21.79557810465025000 ) ) ; +#6174 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -90.97465602836892600, -3.162233253608030600 ) ) ; +#6175 = CARTESIAN_POINT ( 'NONE', ( 37.25747331991177400, -30.50129034074189200, 24.94100643037522900 ) ) ; +#6176 = CARTESIAN_POINT ( 'NONE', ( 39.98458660955505900, -29.82661692245766700, 21.58895252150125500 ) ) ; +#6177 = ORIENTED_EDGE ( 'NONE', *, *, #4331, .F. ) ; +#6178 = CARTESIAN_POINT ( 'NONE', ( 5.000609675519170200, -27.20800769793699600, 7.538732124994747400 ) ) ; +#6179 = APPROVAL_PERSON_ORGANIZATION ( #8911, #10822, #10264 ) ; +#6180 = ORIENTED_EDGE ( 'NONE', *, *, #7617, .T. ) ; +#6181 = CARTESIAN_POINT ( 'NONE', ( 33.84029203504425000, -31.06111246647830300, 26.85188048855402000 ) ) ; +#6182 = CARTESIAN_POINT ( 'NONE', ( 35.57516025901346500, -26.59678646544317400, 17.75920949217265100 ) ) ; +#6183 = CARTESIAN_POINT ( 'NONE', ( 34.10084718085898500, -31.09302362008925500, 26.69997908417561300 ) ) ; +#6184 = CARTESIAN_POINT ( 'NONE', ( 8.568565994263318300, -30.23166866048113700, 25.57867808947731800 ) ) ; +#6185 = CARTESIAN_POINT ( 'NONE', ( 44.87842640346447400, -7.810182590543952600, -18.74565318504859600 ) ) ; +#6186 = CARTESIAN_POINT ( 'NONE', ( 8.298217595710852200E-013, -9.797212015453807200, 10.13283691790599600 ) ) ; +#6187 = ORIENTED_EDGE ( 'NONE', *, *, #4840, .T. ) ; +#6188 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000915200, -9.597945855804225000, -14.45326470095023900 ) ) ; +#6189 = CARTESIAN_POINT ( 'NONE', ( 28.37752246434744000, -31.13225233317741900, 28.52674198569895100 ) ) ; +#6190 = CARTESIAN_POINT ( 'NONE', ( 38.57044723164838700, -30.60978363578276900, 23.21365712523446600 ) ) ; +#6191 = CIRCLE ( 'NONE', #8882, 2.499999999999998700 ) ; +#6192 = EDGE_LOOP ( 'NONE', ( #6816, #7135, #7158, #7469 ) ) ; +#6193 = CARTESIAN_POINT ( 'NONE', ( 7.245276688623542700, -9.904033607360252800, 23.71686295180089500 ) ) ; +#6194 = CARTESIAN_POINT ( 'NONE', ( 35.74934549755351300, -31.16967390299507900, 25.58128929814230500 ) ) ; +#6195 = CARTESIAN_POINT ( 'NONE', ( 11.71937046573403400, -10.59340476653086300, -25.04895088055456400 ) ) ; +#6196 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, -95.07596123493894400, 17.89374687377984300 ) ) ; +#6197 = CARTESIAN_POINT ( 'NONE', ( 4.999999999998704100, -90.82477459660636000, -3.049166625078239400 ) ) ; +#6198 = CARTESIAN_POINT ( 'NONE', ( 34.21881276120178900, -18.13468278094246600, -24.65012257436348600 ) ) ; +#6199 = CARTESIAN_POINT ( 'NONE', ( 6.884757014910753100, -29.55920850394225900, 24.02911172188745300 ) ) ; +#6200 = CARTESIAN_POINT ( 'NONE', ( 44.47210328072624500, -11.05576768260854000, 8.011081809018223900 ) ) ; +#6201 = CARTESIAN_POINT ( 'NONE', ( 31.64465659886993300, -30.80772138972328000, 27.81671834288537000 ) ) ; +#6202 = CARTESIAN_POINT ( 'NONE', ( 11.84150201710832700, -31.00209833025833500, 27.19744787816747700 ) ) ; +#6203 = VECTOR ( 'NONE', #11813, 1000.000000000000000 ) ; +#6204 = CARTESIAN_POINT ( 'NONE', ( 29.10801628768733500, -17.64801048574304300, 23.65144940262229800 ) ) ; +#6205 = CARTESIAN_POINT ( 'NONE', ( 39.14071364797251800, -30.47338590205668800, 21.47491005283943400 ) ) ; +#6206 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#6207 = CARTESIAN_POINT ( 'NONE', ( 4.501960007066048600, -9.999999999999996400, 20.91762477612129300 ) ) ; +#6208 = CARTESIAN_POINT ( 'NONE', ( 4.994950907274374100, -19.99292897971336900, -11.59766412587289300 ) ) ; +#6209 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.500000000000000000, 22.50000000000000700 ) ) ; +#6210 = CARTESIAN_POINT ( 'NONE', ( 1.553579334292708000, -9.337984947889637500, 16.71327868704499100 ) ) ; +#6211 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #10865, #7834, #11880 ), + ( #5794, #12838, #6841 ), + ( #757, #7877, #1761 ), + ( #8897, #2766, #9901 ), + ( #3772, #10910, #4802 ), + ( #11922, #5838, #12879 ), + ( #6884, #801, #7920 ), + ( #1798, #8941, #2812 ), + ( #9944, #3818, #10959 ), + ( #4848, #11961, #5881 ), + ( #12917, #6926, #841 ), + ( #7966, #1845, #8982 ), + ( #2858, #9990, #3862 ), + ( #11003, #4891, #12001 ), + ( #5922, #12954, #6974 ), + ( #883, #8010, #1893 ), + ( #9027, #2903, #10035 ), + ( #3906, #11047, #4935 ), + ( #12042, #5965, #12995 ), + ( #7025, #931, #8049 ), + ( #1932, #9071, #2945 ), + ( #10071, #3948, #11094 ), + ( #4979, #12083, #6012 ), + ( #13035, #7068, #977 ), + ( #8096, #1976, #9112 ), + ( #2992, #10115, #3989 ), + ( #11140, #5027, #12124 ), + ( #6056, #3, #7110 ), + ( #1014, #8140, #2020 ), + ( #9154, #3036, #10164 ), + ( #4033, #11184, #5072 ), + ( #12171, #6101, #48 ), + ( #7157, #1058, #8182 ), + ( #2070, #9199, #3078 ), + ( #10209, #4084, #11226 ), + ( #5115, #12214, #6147 ), + ( #94, #7204, #1105 ), + ( #8232, #2112, #9247 ), + ( #3119, #10252, #4131 ), + ( #11276, #5154, #12258 ), + ( #6384, #337, #7439 ), + ( #1330, #8470, #2332 ), + ( #9473, #3350, #10486 ), + ( #4354, #11503, #5396 ), + ( #12475, #6429, #381 ), + ( #7486, #1374, #8510 ), + ( #2371, #9516, #3389 ), + ( #10527, #4401, #11545 ), + ( #5439, #12514, #6474 ), + ( #419, #7526, #1421 ), + ( #8551, #2409, #9559 ), + ( #3432, #10563, #4443 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.03035883970482819800, 0.03316850869882453900, 0.03457334319582271200, 0.03597817769282088400, 0.03878784668681722900, 0.04159751568081357400, 0.04721685366880626300, 0.05002652266280260800, 0.05143135715980078100, 0.05283619165679894600, 0.05845552964479162900, 0.05986036414178980100, 0.06126519863878797400, 0.06407486763278431900, 0.06688453662678066300, 0.06828937112377883600, 0.06969420562077700800, 0.07004541424502655500, 0.07013321640108893800, 0.07015516694010454100, 0.07017711747912013000, 0.07022101855715132100, 0.07039662286927608800, 0.07109904011777518100, 0.07250387461477335300, 0.07531354360876969800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9553474518478561900, 1.000000000000000000), + ( 1.000000000000000000, 0.9553393296292580500, 1.000000000000000000), + ( 1.000000000000000000, 0.9553746228164712300, 1.000000000000000000), + ( 1.000000000000000000, 0.9554944666781858300, 1.000000000000000000), + ( 1.000000000000000000, 0.9555458374573792000, 1.000000000000000000), + ( 1.000000000000000000, 0.9556698090934582200, 1.000000000000000000), + ( 1.000000000000000000, 0.9557424101204365900, 1.000000000000000000), + ( 1.000000000000000000, 0.9559910526722175100, 1.000000000000000000), + ( 1.000000000000000000, 0.9561977560096093200, 1.000000000000000000), + ( 1.000000000000000000, 0.9566922044689840600, 1.000000000000000000), + ( 1.000000000000000000, 0.9569801756469484800, 1.000000000000000000), + ( 1.000000000000000000, 0.9579609538272116900, 1.000000000000000000), + ( 1.000000000000000000, 0.9587486270580407600, 1.000000000000000000), + ( 1.000000000000000000, 0.9601004205091135900, 1.000000000000000000), + ( 1.000000000000000000, 0.9605800577581435900, 1.000000000000000000), + ( 1.000000000000000000, 0.9613423534938641000, 1.000000000000000000), + ( 1.000000000000000000, 0.9616035677843358700, 1.000000000000000000), + ( 1.000000000000000000, 0.9621326007857612400, 1.000000000000000000), + ( 1.000000000000000000, 0.9624012685538032600, 1.000000000000000000), + ( 1.000000000000000000, 0.9637644544190417900, 1.000000000000000000), + ( 1.000000000000000000, 0.9649187316022511700, 1.000000000000000000), + ( 1.000000000000000000, 0.9664266473276117400, 1.000000000000000000), + ( 1.000000000000000000, 0.9667318411970055000, 1.000000000000000000), + ( 1.000000000000000000, 0.9673415267156605400, 1.000000000000000000), + ( 1.000000000000000000, 0.9676466656012013800, 1.000000000000000000), + ( 1.000000000000000000, 0.9685625205659587100, 1.000000000000000000), + ( 1.000000000000000000, 0.9691736293857382600, 1.000000000000000000), + ( 1.000000000000000000, 0.9703972066412596100, 1.000000000000000000), + ( 1.000000000000000000, 0.9710098968343696700, 1.000000000000000000), + ( 1.000000000000000000, 0.9719280268193458700, 1.000000000000000000), + ( 1.000000000000000000, 0.9722341795089212100, 1.000000000000000000), + ( 1.000000000000000000, 0.9728404100951805200, 1.000000000000000000), + ( 1.000000000000000000, 0.9731412545526727500, 1.000000000000000000), + ( 1.000000000000000000, 0.9735146919469079800, 1.000000000000000000), + ( 1.000000000000000000, 0.9735892487492608900, 1.000000000000000000), + ( 1.000000000000000000, 0.9736822854004127900, 1.000000000000000000), + ( 1.000000000000000000, 0.9737008847638218800, 1.000000000000000000), + ( 1.000000000000000000, 0.9737241240738875300, 1.000000000000000000), + ( 1.000000000000000000, 0.9737296223667324400, 1.000000000000000000), + ( 1.000000000000000000, 0.9737364700563668800, 1.000000000000000000), + ( 1.000000000000000000, 0.9737398654133526700, 1.000000000000000000), + ( 1.000000000000000000, 0.9737499659866972700, 1.000000000000000000), + ( 1.000000000000000000, 0.9737565857056562600, 1.000000000000000000), + ( 1.000000000000000000, 0.9737891138596420600, 1.000000000000000000), + ( 1.000000000000000000, 0.9738133109962736600, 1.000000000000000000), + ( 1.000000000000000000, 0.9739251395547715600, 1.000000000000000000), + ( 1.000000000000000000, 0.9739853057083713800, 1.000000000000000000), + ( 1.000000000000000000, 0.9740766099989922600, 1.000000000000000000), + ( 1.000000000000000000, 0.9740186404360499100, 1.000000000000000000), + ( 1.000000000000000000, 0.9734748249416700400, 1.000000000000000000), + ( 1.000000000000000000, 0.9726370491888521900, 1.000000000000000000), + ( 1.000000000000000000, 0.9713998002460971800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#6212 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -30.65936817455452300, 28.85719598643633400 ) ) ; +#6213 = CARTESIAN_POINT ( 'NONE', ( 10.40548748485488800, -30.01886177414759200, 26.59893611064145300 ) ) ; +#6214 = CARTESIAN_POINT ( 'NONE', ( 29.07608945946902800, -100.0000000000000300, 5.963509649343822400 ) ) ; +#6215 = CARTESIAN_POINT ( 'NONE', ( 38.33767597873661300, -8.535532789688030400, -24.98146400907205900 ) ) ; +#6216 = CARTESIAN_POINT ( 'NONE', ( 40.19040514284997600, -10.22483721569758000, 21.04512673853352900 ) ) ; +#6217 = CARTESIAN_POINT ( 'NONE', ( 5.910159168492003600, -28.97643582403990000, 21.98530352164387100 ) ) ; +#6218 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000062200, -90.67527718019383100, -2.935316354456297000 ) ) ; +#6219 = CARTESIAN_POINT ( 'NONE', ( 36.65184948366373200, -29.45611475574386900, 25.10376646080762700 ) ) ; +#6220 = EDGE_LOOP ( 'NONE', ( #7255, #7282 ) ) ; +#6221 = CARTESIAN_POINT ( 'NONE', ( 38.92420708895958400, -27.92562628259815600, 6.515931340162209700 ) ) ; +#6222 = ADVANCED_FACE ( 'NONE', ( #3219 ), #10700, .T. ) ; +#6223 = EDGE_CURVE ( 'NONE', #1233, #614, #11022, .T. ) ; +#6224 = CARTESIAN_POINT ( 'NONE', ( 33.76392580323398100, -30.49922597477378300, 27.04614375537833100 ) ) ; +#6225 = CARTESIAN_POINT ( 'NONE', ( 39.74158068469615300, -28.62631670547677800, 17.93734533639001700 ) ) ; +#6226 = CARTESIAN_POINT ( 'NONE', ( 34.38358421007158200, -31.11429558709986400, 26.53399871058288500 ) ) ; +#6227 = CARTESIAN_POINT ( 'NONE', ( 8.832025633192673200, -31.16495209797554700, 25.23845091649083700 ) ) ; +#6228 = CARTESIAN_POINT ( 'NONE', ( 8.648466853317515300, -89.50553548956774800, 5.756509624865297600 ) ) ; +#6229 = CARTESIAN_POINT ( 'NONE', ( 23.34736018733860900, -7.688433297844065700, -32.82212121724190700 ) ) ; +#6230 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, -7.807939723281217300, 12.02150454214262600 ) ) ; +#6231 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -7.312450416512202600, -16.46148379514147600 ) ) ; +#6232 = CARTESIAN_POINT ( 'NONE', ( 25.04594542586620100, -33.17879905958958600, 28.41295234537445700 ) ) ; +#6233 = ADVANCED_FACE ( 'NONE', ( #5278 ), #5427, .T. ) ; +#6234 = CARTESIAN_POINT ( 'NONE', ( 38.07514432112757400, -29.17219998216705100, 23.63506079233231800 ) ) ; +#6235 = CIRCLE ( 'NONE', #3637, 2.500000000000002200 ) ; +#6236 = CARTESIAN_POINT ( 'NONE', ( 35.79805689401809600, -30.35897398251626800, 25.99567369271913000 ) ) ; +#6237 = CARTESIAN_POINT ( 'NONE', ( 10.44296278358984700, -17.91543512064830400, -24.55678946782964900 ) ) ; +#6238 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9486, #8485, #11516, #5411, #12491, #6442, #395, #7498, #1388, #8522, #2383, #9530, #3400, #10540, #4417, #11561, #5454, #12529, #6489, #429, #7541, #1431, #8564, #2421, #9571, #3447, #10577, #4455, #11602, #5496, #12564, #6531, #472, #7576, #1471, #8611, #2462, #9612, #3486, #10618, #4490, #11645, #5540 ), + .UNSPECIFIED., .F., .F., + ( 4, 1, 2, 2, 1, 1, 1, 1, 1, 2, 2, 1, 1, 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 1, 1, 1, 2, 2, 1, 1, 4 ), + ( 0.1940847403016666700, 0.2444544440328010300, 0.2476025505159969700, 0.2507506569991929700, 0.2570468699655852300, 0.2696392958983693800, 0.2948241477639380600, 0.3955635552262131100, 0.4963029626884881100, 0.4994510691716845800, 0.5025991756548811000, 0.5088953886212748100, 0.5214878145540626800, 0.5466726664196381900, 0.5970423701507892000, 0.6222272220163647100, 0.6348196479491521300, 0.6474120738819397800, 0.6977817776130897900, 0.7481514813442399200, 0.7512995878274371100, 0.7544476943106344100, 0.7607439072770285600, 0.7733363332098169800, 0.7985211850753933800, 0.8488908888065465100, 0.8740757406721225700, 0.8803719536385166100, 0.8866681666049107700, 0.8992605925376983000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#6239 = CARTESIAN_POINT ( 'NONE', ( 34.57780774283263300, -31.12739926318663200, 26.41380122926276300 ) ) ; +#6240 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -91.87365618056733800, -1.973424355171017300 ) ) ; +#6241 = CARTESIAN_POINT ( 'NONE', ( 34.90612908565035600, -20.00322637106736300, -23.80951595376251000 ) ) ; +#6242 = CARTESIAN_POINT ( 'NONE', ( 7.194589947334500300, -30.96201385915575700, 23.67754974113291100 ) ) ; +#6243 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999995700, -10.00002403661276400, 8.006208275836428400 ) ) ; +#6244 = CARTESIAN_POINT ( 'NONE', ( 31.64591328901431000, -30.86419964825631400, 27.80531988104269600 ) ) ; +#6245 = CARTESIAN_POINT ( 'NONE', ( 20.14039537637302500, -27.96255689439421800, 27.45771657700752800 ) ) ; +#6246 = CARTESIAN_POINT ( 'NONE', ( 11.82850803385886000, -30.68583580948714500, 27.28390034212527500 ) ) ; +#6247 = CIRCLE ( 'NONE', #5515, 3.189999999999994200 ) ; +#6248 = CARTESIAN_POINT ( 'NONE', ( 26.71269136657762600, -18.86545220486246800, 23.43678158010146000 ) ) ; +#6249 = CARTESIAN_POINT ( 'NONE', ( 39.37520376283463700, -29.06819937045802100, 21.79082143889104400 ) ) ; +#6250 = CARTESIAN_POINT ( 'NONE', ( 7.091092079950233700, -9.961447927454322800, 23.54589512835880800 ) ) ; +#6251 = CARTESIAN_POINT ( 'NONE', ( 3.949331922278137800, -17.89998533185023200, -11.56436180437063400 ) ) ; +#6252 = CARTESIAN_POINT ( 'NONE', ( 44.38813748952129100, -10.58364014307463200, 11.59806018494584900 ) ) ; +#6253 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669239500, -0.9848077530122092400 ) ) ; +#6254 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #12628, #12364, #12614 ), + ( #12239, #12329, #12280 ), + ( #12216, #11691, #11973 ), + ( #12032, #12941, #11909 ), + ( #10977, #11461, #11625 ), + ( #452, #12414, #11261 ), + ( #11143, #12174, #10603 ), + ( #10588, #10390, #10234 ), + ( #9575, #8968, #9288 ), + ( #9622, #10275, #9470 ), + ( #9415, #9354, #830 ), + ( #8954, #8593, #8760 ), + ( #8675, #8567, #5478 ), + ( #8507, #8466, #7097 ), + ( #8209, #8236, #7983 ), + ( #8128, #7938, #7863 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 6.283185307179586200, 6.479534848028948500, 6.675884388878310800, 6.872233929727672200, 7.068583470577034500, 7.264933011426396800, 7.461282552275758200, 7.853981633974482800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865469100, 1.000000000000000000), + ( 1.000000000000000000, 0.7070717008705437200, 1.000000000000000000), + ( 1.000000000000000000, 0.7117460391535079800, 1.000000000000000000), + ( 1.000000000000000000, 0.7291288573898082600, 1.000000000000000000), + ( 1.000000000000000000, 0.7418334672881740100, 1.000000000000000000), + ( 1.000000000000000000, 0.7723967724090301500, 1.000000000000000000), + ( 1.000000000000000000, 0.7902180514827589200, 1.000000000000000000), + ( 1.000000000000000000, 0.8275942267605830300, 1.000000000000000000), + ( 1.000000000000000000, 0.8471316911967981000, 1.000000000000000000), + ( 1.000000000000000000, 0.8849191163720771000, 1.000000000000000000), + ( 1.000000000000000000, 0.9031651194661416400, 1.000000000000000000), + ( 1.000000000000000000, 0.9360421642202531000, 1.000000000000000000), + ( 1.000000000000000000, 0.9506740472589564300, 1.000000000000000000), + ( 1.000000000000000000, 0.9867291651255565300, 1.000000000000000000), + ( 1.000000000000000000, 1.000158598892017600, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#6255 = CARTESIAN_POINT ( 'NONE', ( 34.23299813788269600, -11.92243411262077400, -24.99999999999959900 ) ) ; +#6256 = CARTESIAN_POINT ( 'NONE', ( 10.54434196709907900, -30.71654419228925900, 26.68233027968326000 ) ) ; +#6257 = CARTESIAN_POINT ( 'NONE', ( 41.15537051365254200, -11.23571604708998500, -22.46755997374652500 ) ) ; +#6258 = CARTESIAN_POINT ( 'NONE', ( 39.77017603428403400, -9.996403763623904500, 26.08058500818623700 ) ) ; +#6259 = CARTESIAN_POINT ( 'NONE', ( 5.685203000016571200, -30.42745048428803000, 21.78283829771720200 ) ) ; +#6260 = FACE_OUTER_BOUND ( 'NONE', #2573, .T. ) ; +#6261 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -8.819658136827527500, 8.000759442670784000 ) ) ; +#6262 = CARTESIAN_POINT ( 'NONE', ( 30.54183172205475200, -7.992776358529532400, 28.69394104150373800 ) ) ; +#6263 = CARTESIAN_POINT ( 'NONE', ( 36.90704547328338200, -30.31468088650601800, 25.26128664008270900 ) ) ; +#6264 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.04531648070921800, 16.23785755017284400 ) ) ; +#6265 = CARTESIAN_POINT ( 'NONE', ( 24.99999999386482900, -19.13172188299338600, 23.38983105170242300 ) ) ; +#6266 = CARTESIAN_POINT ( 'NONE', ( 33.75714728701780100, -30.92567736256395600, 26.95585002368930100 ) ) ; +#6267 = CARTESIAN_POINT ( 'NONE', ( 39.70230214548570300, -24.96337052352592100, 10.25072243845912300 ) ) ; +#6268 = CARTESIAN_POINT ( 'NONE', ( 2.908100691834442300, -10.00000000000000000, 18.64340213818398700 ) ) ; +#6269 = ORIENTED_EDGE ( 'NONE', *, *, #5229, .F. ) ; +#6270 = EDGE_LOOP ( 'NONE', ( #1394, #1546, #1561, #1684, #1698 ) ) ; +#6271 = CARTESIAN_POINT ( 'NONE', ( 34.78313604897550000, -31.13873398845695200, 26.27879923058459600 ) ) ; +#6272 = CARTESIAN_POINT ( 'NONE', ( 5.000000000001898900, -91.58528500546613300, -1.725079236354772700 ) ) ; +#6273 = CARTESIAN_POINT ( 'NONE', ( 8.649544996795970800, -30.45328563172511200, 25.61674579008406700 ) ) ; +#6274 = LINE ( 'NONE', #1452, #1202 ) ; +#6275 = CARTESIAN_POINT ( 'NONE', ( 6.935228120172397800, -89.64557226224558000, 3.275176570732930800 ) ) ; +#6276 = CARTESIAN_POINT ( 'NONE', ( 32.85119804981706400, -10.00000000000000000, -30.26223456583069500 ) ) ; +#6277 = CARTESIAN_POINT ( 'NONE', ( 1.054051274096651900, -7.268690097351576000, 18.13960933835513600 ) ) ; +#6278 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 12.00000000000000000, 22.50000000000000700 ) ) ; +#6279 = AXIS2_PLACEMENT_3D ( 'NONE', #1993, #1841, #1795 ) ; +#6280 = CARTESIAN_POINT ( 'NONE', ( 38.55088346991644200, -30.27705344482123100, 23.71398350974442000 ) ) ; +#6281 = ORIENTED_EDGE ( 'NONE', *, *, #9072, .F. ) ; +#6282 = CARTESIAN_POINT ( 'NONE', ( 35.68093195895677600, -31.11995812826884500, 25.68369043892600700 ) ) ; +#6283 = CARTESIAN_POINT ( 'NONE', ( 17.60013235038413300, -97.51367397290083300, 21.97013632456544500 ) ) ; +#6284 = LINE ( 'NONE', #4253, #11062 ) ; +#6285 = CARTESIAN_POINT ( 'NONE', ( 29.74413697432583700, -94.71799171678537700, 18.33246086800513600 ) ) ; +#6286 = CARTESIAN_POINT ( 'NONE', ( 34.84301304038758200, -31.14196263121759500, 26.23919478077205600 ) ) ; +#6287 = CARTESIAN_POINT ( 'NONE', ( 25.80601710275463400, -32.11937065052718800, 21.11003699856121700 ) ) ; +#6288 = ADVANCED_FACE ( 'NONE', ( #5601 ), #3061, .T. ) ; +#6289 = CARTESIAN_POINT ( 'NONE', ( 6.794152424030387200, -29.98379699589682800, 24.19138544200972900 ) ) ; +#6290 = CARTESIAN_POINT ( 'NONE', ( 31.43943055971812200, -30.81021663161099200, 27.87990429262054100 ) ) ; +#6291 = CARTESIAN_POINT ( 'NONE', ( 43.56210201504244800, -8.516041267309720600, -22.36066134503039000 ) ) ; +#6292 = CARTESIAN_POINT ( 'NONE', ( 11.84218415221206300, -30.39965895607084100, 27.30206997182742900 ) ) ; +#6293 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999907600, -5.243700911217064100, -19.54798355909045100 ) ) ; +#6294 = CARTESIAN_POINT ( 'NONE', ( 39.68124195668659100, -30.19458743825638800, 21.59240731677461900 ) ) ; +#6295 = EDGE_LOOP ( 'NONE', ( #1213, #10431, #2376 ) ) ; +#6296 = VERTEX_POINT ( 'NONE', #3938 ) ; +#6297 = CARTESIAN_POINT ( 'NONE', ( 2.227052546285274400, -9.999999999999996400, 17.42263787871702600 ) ) ; +#6298 = CARTESIAN_POINT ( 'NONE', ( 5.003206284699635000, -22.33460806869799600, -11.62810519631292500 ) ) ; +#6299 = ORIENTED_EDGE ( 'NONE', *, *, #12061, .T. ) ; +#6300 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6301 = EDGE_CURVE ( 'NONE', #2287, #300, #723, .T. ) ; +#6302 = CARTESIAN_POINT ( 'NONE', ( 20.18719383516403500, -30.65917406624153000, 28.85723021296909600 ) ) ; +#6303 = CARTESIAN_POINT ( 'NONE', ( 10.57782886388212000, -30.15748919843559200, 26.71471761367827800 ) ) ; +#6304 = CARTESIAN_POINT ( 'NONE', ( 26.50324979293787200, -27.99874350309054100, 27.44664516839521100 ) ) ; +#6305 = CARTESIAN_POINT ( 'NONE', ( 0.3556026458594998600, -6.915903887829588600, -20.82080212638334900 ) ) ; +#6306 = CARTESIAN_POINT ( 'NONE', ( 34.68167944849816600, -12.17311659256431300, 24.43095280969249200 ) ) ; +#6307 = ORIENTED_EDGE ( 'NONE', *, *, #2209, .T. ) ; +#6308 = CARTESIAN_POINT ( 'NONE', ( 5.378431388359608400, -29.28086485186755900, 21.98051442521659700 ) ) ; +#6309 = CARTESIAN_POINT ( 'NONE', ( 44.47215592469206100, -11.05571972952802700, 7.998280072792608700 ) ) ; +#6310 = CARTESIAN_POINT ( 'NONE', ( 33.28129858740850700, -7.984208958222963800, 27.73083266785870600 ) ) ; +#6311 = CARTESIAN_POINT ( 'NONE', ( 36.65247391330670700, -31.14395364396878900, 24.80693604658645100 ) ) ; +#6312 = ORIENTED_EDGE ( 'NONE', *, *, #11781, .T. ) ; +#6313 = CARTESIAN_POINT ( 'NONE', ( 14.41883819619317300, -100.0000000000000100, 5.321834943021102900 ) ) ; +#6314 = CARTESIAN_POINT ( 'NONE', ( 30.96279650175132800, -19.20331407471105600, 22.12217764491006400 ) ) ; +#6315 = CARTESIAN_POINT ( 'NONE', ( 33.55495561120047700, -30.36198646018629800, 27.13511726173081900 ) ) ; +#6316 = VERTEX_POINT ( 'NONE', #9794 ) ; +#6317 = CARTESIAN_POINT ( 'NONE', ( 6.207332501430126800, -12.50030223058809900, 20.85771616841267200 ) ) ; +#6318 = CARTESIAN_POINT ( 'NONE', ( 0.3414591457168538200, -7.328779466977728400, -19.57711222796908500 ) ) ; +#6319 = CARTESIAN_POINT ( 'NONE', ( 12.13116796155585900, -30.65036141095524200, 27.41027752037888400 ) ) ; +#6320 = ORIENTED_EDGE ( 'NONE', *, *, #1799, .T. ) ; +#6321 = CARTESIAN_POINT ( 'NONE', ( 8.831547631743095600, -29.58660161159549100, 25.51743133008045900 ) ) ; +#6322 = CARTESIAN_POINT ( 'NONE', ( 36.62352999471485800, -20.55203307036980600, -21.31342927444646000 ) ) ; +#6323 = EDGE_CURVE ( 'NONE', #1574, #6842, #8028, .T. ) ; +#6324 = CARTESIAN_POINT ( 'NONE', ( 2.602085213965210600E-015, -8.819620270554569400, -11.52528143411519700 ) ) ; +#6325 = CARTESIAN_POINT ( 'NONE', ( 39.48124449343572500, -7.864186288153848500, 25.00000000000000000 ) ) ; +#6326 = CARTESIAN_POINT ( 'NONE', ( 3.155120589830645800, -9.309459149375660700, -24.08697170230305000 ) ) ; +#6327 = EDGE_CURVE ( 'NONE', #8372, #4073, #7705, .T. ) ; +#6328 = ORIENTED_EDGE ( 'NONE', *, *, #11512, .F. ) ; +#6329 = CARTESIAN_POINT ( 'NONE', ( 37.95285460569494500, -29.12948494640786000, 23.69555135979510000 ) ) ; +#6330 = CARTESIAN_POINT ( 'NONE', ( 35.57159524287203600, -30.09890327630548200, 26.09603446024627300 ) ) ; +#6331 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -95.07596123493894400, 16.93034213569669800 ) ) ; +#6332 = ORIENTED_EDGE ( 'NONE', *, *, #4553, .T. ) ; +#6333 = ORIENTED_EDGE ( 'NONE', *, *, #12356, .T. ) ; +#6334 = CARTESIAN_POINT ( 'NONE', ( 32.87363624594946300, -95.07596123493894400, 15.43886966067582900 ) ) ; +#6335 = CARTESIAN_POINT ( 'NONE', ( 0.1338963805795488900, -6.470118406604792800, -19.48910208509609600 ) ) ; +#6336 = CARTESIAN_POINT ( 'NONE', ( 5.087343716415123400, -91.27442453182199200, -1.521502677801896700 ) ) ; +#6337 = CARTESIAN_POINT ( 'NONE', ( 29.82329978544732500, -39.02155075754183100, 19.07620989343429600 ) ) ; +#6338 = ORIENTED_EDGE ( 'NONE', *, *, #10837, .F. ) ; +#6339 = CARTESIAN_POINT ( 'NONE', ( 7.333134869006870300, -31.02743953696868200, 23.72857579364882600 ) ) ; +#6340 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000015100, -27.09143239524032500, 6.754920151478383000 ) ) ; +#6341 = CARTESIAN_POINT ( 'NONE', ( 31.44000061630530900, -30.84078776299457300, 27.87422009410425600 ) ) ; +#6342 = CARTESIAN_POINT ( 'NONE', ( 38.95777896990770000, -28.89728757686978300, 21.88321289906870600 ) ) ; +#6343 = CARTESIAN_POINT ( 'NONE', ( 1.125429169029369400, -10.00000000000000000, 14.86526534314501900 ) ) ; +#6344 = CARTESIAN_POINT ( 'NONE', ( 4.995036329705507100, -19.99395565675148500, -11.61589995758021300 ) ) ; +#6345 = CARTESIAN_POINT ( 'NONE', ( 29.04636226071089000, -30.34823681503284800, 25.95592078410841800 ) ) ; +#6346 = CARTESIAN_POINT ( 'NONE', ( 19.96403575070553400, -27.96616267483065200, 27.45684687246949100 ) ) ; +#6347 = CARTESIAN_POINT ( 'NONE', ( 44.09157152587821600, -7.873854980443964800, 18.11134077736177900 ) ) ; +#6348 = LINE ( 'NONE', #6146, #3629 ) ; +#6349 = CARTESIAN_POINT ( 'NONE', ( 0.7070501277713473500, -9.536266298986273400, -17.71566005612454100 ) ) ; +#6350 = ORIENTED_EDGE ( 'NONE', *, *, #4331, .T. ) ; +#6351 = CARTESIAN_POINT ( 'NONE', ( -2.234021351024050600E-010, -5.277244803497334900, -19.46407537775039400 ) ) ; +#6352 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -1.972066022637282400, 11.18414218126905400 ) ) ; +#6353 = CARTESIAN_POINT ( 'NONE', ( 6.145816377616251100, -30.64794151503169700, 21.91733637544589500 ) ) ; +#6354 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -93.58403201387047000, 0.4683135298482190600 ) ) ; +#6355 = CARTESIAN_POINT ( 'NONE', ( 36.68833368334552600, -30.08336644994365000, 25.39170881282851500 ) ) ; +#6356 = CARTESIAN_POINT ( 'NONE', ( 7.915842926500919100, -100.0000000000000100, -2.818161743892669200 ) ) ; +#6357 = CARTESIAN_POINT ( 'NONE', ( 34.11860929997021700, -19.31049465783596400, 20.22326352771224100 ) ) ; +#6358 = ADVANCED_FACE ( 'NONE', ( #4957 ), #10067, .T. ) ; +#6359 = CARTESIAN_POINT ( 'NONE', ( 33.56920871300160800, -30.75673133771374900, 27.09803521608212400 ) ) ; +#6360 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -94.39240458593478400, 1.716929485264762100 ) ) ; +#6361 = CARTESIAN_POINT ( 'NONE', ( 0.7049093404983455300, -9.999999999999996400, 13.52878568315426100 ) ) ; +#6362 = CARTESIAN_POINT ( 'NONE', ( 0.08287122709376096300, -6.177290496403027300, -19.46038791511120500 ) ) ; +#6363 = CARTESIAN_POINT ( 'NONE', ( 4.999999999998020300, -92.96541870103246200, 0.9151443176150340100 ) ) ; +#6364 = EDGE_LOOP ( 'NONE', ( #1506, #1659, #1706 ) ) ; +#6365 = CARTESIAN_POINT ( 'NONE', ( 12.33818078474577500, -30.96150835299432200, 27.41942024400985600 ) ) ; +#6366 = CARTESIAN_POINT ( 'NONE', ( 8.852637485209291100, -30.69205613626727900, 25.66960466397325300 ) ) ; +#6367 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.500000000000000000, -22.50000000000000000 ) ) ; +#6368 = CARTESIAN_POINT ( 'NONE', ( -1.508020618255245900E-013, -9.998053575143726900, -11.73622912163594600 ) ) ; +#6369 = CARTESIAN_POINT ( 'NONE', ( 36.05762081095428300, -10.72101518351415500, 25.00000000000000000 ) ) ; +#6370 = CARTESIAN_POINT ( 'NONE', ( 24.88869825307920900, -25.52353201642539900, 22.26278246961262400 ) ) ; +#6371 = ADVANCED_FACE ( 'NONE', ( #10397 ), #11553, .T. ) ; +#6372 = CARTESIAN_POINT ( 'NONE', ( 38.48053928520639000, -30.01411263059516400, 23.88693131274604300 ) ) ; +#6373 = CARTESIAN_POINT ( 'NONE', ( 5.040435684690164600, -95.07596123493894400, -3.476174004076949800 ) ) ; +#6374 = CYLINDRICAL_SURFACE ( 'NONE', #4916, 1.200000000000006600 ) ; +#6375 = CARTESIAN_POINT ( 'NONE', ( 35.57159504252460600, -30.88035335568709900, 25.95825793406531900 ) ) ; +#6376 = CARTESIAN_POINT ( 'NONE', ( 11.23452440667008300, -32.38346429597573500, 24.73734694259695700 ) ) ; +#6377 = AXIS2_PLACEMENT_3D ( 'NONE', #12951, #12913, #12638 ) ; +#6378 = CARTESIAN_POINT ( 'NONE', ( 37.16509586503648400, -95.07596123493893000, 14.35557039341880200 ) ) ; +#6379 = CARTESIAN_POINT ( 'NONE', ( 34.91070157576658800, -31.14545856307141500, 26.19396196557089200 ) ) ; +#6380 = CARTESIAN_POINT ( 'NONE', ( 5.402962182419003100, -92.41467508776249000, 1.255243565481148900 ) ) ; +#6381 = CARTESIAN_POINT ( 'NONE', ( 34.44835864033520800, -32.35799559910031300, 26.08288648907234400 ) ) ; +#6382 = CARTESIAN_POINT ( 'NONE', ( 6.877672806540623200, -30.27055553954537000, 24.26212303698973800 ) ) ; +#6383 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000003600, -10.00001795853784100, 7.993697088937245200 ) ) ; +#6384 = CARTESIAN_POINT ( 'NONE', ( 39.99548660774856000, -22.32847602497234600, -11.56879869367291900 ) ) ; +#6385 = CARTESIAN_POINT ( 'NONE', ( 31.33692901792859000, -30.81211278035447900, 27.91039948657580200 ) ) ; +#6386 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4917, #11024, #5943, #12977, #6999, #906, #8030, #1914 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 1.262897753262582900E-017, 0.0005590448864750735500, 0.001118089772950134500, 0.002236179545900276400 ), + .UNSPECIFIED. ) ; +#6387 = CARTESIAN_POINT ( 'NONE', ( 14.66332012948663700, -30.94276565250871200, 28.16910212500935600 ) ) ; +#6388 = EDGE_CURVE ( 'NONE', #1531, #4714, #4625, .T. ) ; +#6389 = CARTESIAN_POINT ( 'NONE', ( 36.86102230117274600, -12.66457542145879400, 22.56227506445404900 ) ) ; +#6390 = CARTESIAN_POINT ( 'NONE', ( 39.97578199169979700, -29.85059434990400700, 21.71650477135239000 ) ) ; +#6391 = AXIS2_PLACEMENT_3D ( 'NONE', #10523, #4394, #11541 ) ; +#6392 = CARTESIAN_POINT ( 'NONE', ( 0.1421806055388569500, -10.00000000000000000, 10.79657947809080700 ) ) ; +#6393 = CARTESIAN_POINT ( 'NONE', ( 3.949081040234738300, -17.90019913978258300, -11.58377481983972300 ) ) ; +#6394 = EDGE_LOOP ( 'NONE', ( #8059, #8097 ) ) ; +#6395 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6396 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -23.91420473869551000, -27.45344971053349800 ) ) ; +#6397 = FACE_OUTER_BOUND ( 'NONE', #4878, .T. ) ; +#6398 = CARTESIAN_POINT ( 'NONE', ( 33.22910746810426700, -94.73575769388215000, 17.24884210202498000 ) ) ; +#6399 = CARTESIAN_POINT ( 'NONE', ( 0.01812653236589535600, -5.492385492597628100, 16.43736041960189100 ) ) ; +#6400 = CARTESIAN_POINT ( 'NONE', ( 5.141091425181914900, -29.66774652277073800, 22.06514958479980800 ) ) ; +#6401 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -8.819712763591276400, 7.988573162786104300 ) ) ; +#6402 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -94.39237608411653500, 1.716882203205456900 ) ) ; +#6403 = CARTESIAN_POINT ( 'NONE', ( 36.57208528855881000, -30.99384940963797400, 25.08363278366574900 ) ) ; +#6404 = CARTESIAN_POINT ( 'NONE', ( 37.16903156169696800, -94.93190907225677200, 14.63855304688805400 ) ) ; +#6405 = CARTESIAN_POINT ( 'NONE', ( 37.18865012782439500, -19.49307934911661300, 16.98749896584312000 ) ) ; +#6406 = EDGE_CURVE ( 'NONE', #1718, #4221, #7396, .T. ) ; +#6407 = CARTESIAN_POINT ( 'NONE', ( 33.45181702669678000, -30.32522344771695800, 27.17624454728635200 ) ) ; +#6408 = CARTESIAN_POINT ( 'NONE', ( -0.0001071532005050341500, -9.999999999999992900, 9.400990337639923300 ) ) ; +#6409 = FACE_OUTER_BOUND ( 'NONE', #8215, .T. ) ; +#6410 = CARTESIAN_POINT ( 'NONE', ( 5.000000000003733000, -93.59664222891770200, 2.266305945994198100 ) ) ; +#6411 = CARTESIAN_POINT ( 'NONE', ( 12.33281979607067000, -30.73586677149171800, 27.47562533219696200 ) ) ; +#6412 = CARTESIAN_POINT ( 'NONE', ( 8.936836262153111200, -29.81566593867211900, 25.70316448980818100 ) ) ; +#6413 = CARTESIAN_POINT ( 'NONE', ( 8.022939465952751100, -89.55013418175582300, 4.966258557459592100 ) ) ; +#6414 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000000, -17.49999999999999600 ) ) ; +#6415 = CARTESIAN_POINT ( 'NONE', ( 34.55685369229038200, -12.31815857254227900, 24.41320273400504700 ) ) ; +#6416 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2459, #2417, #2876, #3521, #3565, #3613, #4451, #4487, #4533, #4576, #5492, #5577, #6568, #6614 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.01376005546879244600, 0.01489204206049999900, 0.01602402865220755100, 0.01828800183562264900, 0.01941998842733020200, 0.02055197501903775100, 0.02281594820245285200 ), + .UNSPECIFIED. ) ; +#6417 = CARTESIAN_POINT ( 'NONE', ( 37.97389063652047300, -30.95307059975115000, 23.38828760338708800 ) ) ; +#6418 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7370, #12452, #3372, #10511, #4377, #11525 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001715141320934405700, 0.003430282641868811300 ), + .UNSPECIFIED. ) ; +#6419 = AXIS2_PLACEMENT_3D ( 'NONE', #9087, #7785, #7491 ) ; +#6420 = FACE_OUTER_BOUND ( 'NONE', #2714, .T. ) ; +#6421 = CARTESIAN_POINT ( 'NONE', ( 35.41794660333462700, -29.84947672118151700, 26.10175763464680200 ) ) ; +#6422 = PLANE ( 'NONE', #11988 ) ; +#6423 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#6424 = CARTESIAN_POINT ( 'NONE', ( 34.97074093297648300, -31.14832845195790500, 26.15317506740592500 ) ) ; +#6425 = CARTESIAN_POINT ( 'NONE', ( 5.628894662433436800, -92.95357113377876600, 2.611388197518425400 ) ) ; +#6426 = CARTESIAN_POINT ( 'NONE', ( 33.60349259198206800, -31.41785052285632000, 18.53401340405790900 ) ) ; +#6427 = ADVANCED_FACE ( 'NONE', ( #2575 ), #9201, .T. ) ; +#6428 = CARTESIAN_POINT ( 'NONE', ( 7.314210920398030800, -29.22254165433273000, 24.06346873195643700 ) ) ; +#6429 = CARTESIAN_POINT ( 'NONE', ( 40.00397093398552800, -19.98468032039892600, -11.41730891447386000 ) ) ; +#6430 = CARTESIAN_POINT ( 'NONE', ( 31.33681269668383300, -30.82716334538795200, 27.90777954685695400 ) ) ; +#6431 = CARTESIAN_POINT ( 'NONE', ( 9.362319605254301200, -31.94518737987369400, 25.98029462689092000 ) ) ; +#6432 = CARTESIAN_POINT ( 'NONE', ( 38.92657075118043500, -30.58071613524287400, 21.58631840541854200 ) ) ; +#6433 = CIRCLE ( 'NONE', #7847, 1.200000000000012600 ) ; +#6434 = CARTESIAN_POINT ( 'NONE', ( 4.163336342344337000E-014, -9.999999999999998200, 8.005331014629284400 ) ) ; +#6435 = CARTESIAN_POINT ( 'NONE', ( 5.001482833425563400, -22.34405184578436000, -11.71935058215128200 ) ) ; +#6436 = ADVANCED_FACE ( 'NONE', ( #1637 ), #6826, .T. ) ; +#6437 = DIRECTION ( 'NONE', ( -0.01909900421572798000, -0.9998175973836266300, 0.0000000000000000000 ) ) ; +#6438 = CARTESIAN_POINT ( 'NONE', ( 13.26723879962044900, -94.73948908643940600, 17.74561157032166400 ) ) ; +#6439 = AXIS2_PLACEMENT_3D ( 'NONE', #3903, #11043, #7533 ) ; +#6440 = CARTESIAN_POINT ( 'NONE', ( 10.11423849738465600, -13.36407974370885700, -25.00000000000002800 ) ) ; +#6441 = CARTESIAN_POINT ( 'NONE', ( 33.78679656440357300, -99.99999999999998600, -40.86942826376122200 ) ) ; +#6442 = CARTESIAN_POINT ( 'NONE', ( 11.23106710608672300, -12.94459018935963500, 24.48078930248646800 ) ) ; +#6443 = ORIENTED_EDGE ( 'NONE', *, *, #5442, .F. ) ; +#6444 = CARTESIAN_POINT ( 'NONE', ( 6.176720617830598700, -28.92302837218260700, 22.22272939379677200 ) ) ; +#6445 = CARTESIAN_POINT ( 'NONE', ( 44.47217868916120400, -11.05570011407879800, 7.992493186010203300 ) ) ; +#6446 = CARTESIAN_POINT ( 'NONE', ( 29.12303265101316200, -7.995781971385254000, 29.03181843794772000 ) ) ; +#6447 = CARTESIAN_POINT ( 'NONE', ( 36.31845821836208200, -29.75304397099218800, 25.51070844166862300 ) ) ; +#6448 = CIRCLE ( 'NONE', #9519, 3.189999999999995100 ) ; +#6449 = CARTESIAN_POINT ( 'NONE', ( 38.86343094642320000, -19.66847208497594600, 13.87973938149763100 ) ) ; +#6450 = CARTESIAN_POINT ( 'NONE', ( 33.47098148880033400, -30.67407766519560400, 27.15868211908454900 ) ) ; +#6451 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -8.819647309268738400, -11.53187069007421600 ) ) ; +#6452 = CARTESIAN_POINT ( 'NONE', ( 21.65514407991901200, -7.998407050225890400, 29.32691792232614200 ) ) ; +#6453 = CARTESIAN_POINT ( 'NONE', ( 35.09345624546571700, -31.15382713266032500, 26.06881848851367400 ) ) ; +#6454 = CARTESIAN_POINT ( 'NONE', ( 26.24711334075905700, -7.999110319551531000, 29.40597627750097900 ) ) ; +#6455 = CARTESIAN_POINT ( 'NONE', ( 12.33819640506467300, -30.52208208729355100, 27.49685704348035400 ) ) ; +#6456 = VERTEX_POINT ( 'NONE', #4065 ) ; +#6457 = CARTESIAN_POINT ( 'NONE', ( 9.022624214326436100, -31.01346173740850900, 25.55836165531209000 ) ) ; +#6458 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 1, 3, ( + ( #5016, #2058, #9189, #3069, #10201, #4074, #11217, #5105, #12202, #6136, #84, #7196, #1094, #8221, #2102, #9235, #3109, #10243 ), + ( #4122, #11266, #5145, #12249, #6185, #132, #7237, #1141, #8269, #2143, #9276, #3157, #10286, #4166, #11310, #5190, #12290, #6229 ), + ( #178, #7285, #1184, #8315, #2185, #9321, #3201, #10333, #4212, #11352, #5235, #12333, #6276, #226, #7331, #1229, #8355, #2231 ), + ( #9369, #3245, #10379, #4257, #11402, #5283, #12376, #6322, #270, #7375, #1273, #8403, #2272, #9419, #3294, #10425, #4298, #11448 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 2, 1, 1, 2 ), + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( -0.2305239006885287100, -0.2127424419828336800, 0.0000000000000000000, 1.000000000000000000 ), + ( 4.712388980384689700, 4.918555998276519700, 5.124723016168349700, 5.330890034060180600, 5.537057051952010600, 5.743224069843840600, 5.949391087735671500, 6.155558105627501500, 6.361725123519331500 ), + .UNSPECIFIED. ) ; +#6459 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#6460 = EDGE_CURVE ( 'NONE', #1818, #9498, #4431, .T. ) ; +#6461 = ORIENTED_EDGE ( 'NONE', *, *, #11535, .F. ) ; +#6462 = CARTESIAN_POINT ( 'NONE', ( 38.19953537212465000, -29.71563197864555100, 24.06921533325955700 ) ) ; +#6463 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10356, #11379, #7354, #1255, #8380, #2255 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001684538168795041900, 0.003369076337590083900 ), + .UNSPECIFIED. ) ; +#6464 = CARTESIAN_POINT ( 'NONE', ( 35.51839175157235900, -30.62368813370471100, 26.12393398627435600 ) ) ; +#6465 = CARTESIAN_POINT ( 'NONE', ( 35.62648794924557200, -95.07596123493895800, 14.13131049756279900 ) ) ; +#6466 = ORIENTED_EDGE ( 'NONE', *, *, #6977, .T. ) ; +#6467 = ORIENTED_EDGE ( 'NONE', *, *, #9303, .T. ) ; +#6468 = CARTESIAN_POINT ( 'NONE', ( 7.831020412902661000, -94.97301868515218400, 14.62411301269929700 ) ) ; +#6469 = CARTESIAN_POINT ( 'NONE', ( 35.17870881302131600, -31.15719038600633800, 26.00890531216271000 ) ) ; +#6470 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -95.45536033961572300, 3.667068596692892400 ) ) ; +#6471 = CARTESIAN_POINT ( 'NONE', ( 36.63907163756930200, -36.13860968186547500, 14.78079515440539600 ) ) ; +#6472 = CARTESIAN_POINT ( 'NONE', ( 6.995766832349260300, -30.57562929683959800, 24.14286146905736900 ) ) ; +#6473 = VERTEX_POINT ( 'NONE', #10195 ) ; +#6474 = CARTESIAN_POINT ( 'NONE', ( 40.95926086740040300, -17.99970965288684300, -9.628013021308538200 ) ) ; +#6475 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983400, 27.93782961424065500 ) ) ; +#6476 = CARTESIAN_POINT ( 'NONE', ( 6.462492621065567100, -30.78111908891470300, 21.81492603106001800 ) ) ; +#6477 = CARTESIAN_POINT ( 'NONE', ( 39.89472852619370300, -29.52638133647129200, 21.88394651503270100 ) ) ; +#6478 = ORIENTED_EDGE ( 'NONE', *, *, #3900, .T. ) ; +#6479 = ORIENTED_EDGE ( 'NONE', *, *, #1617, .F. ) ; +#6480 = CARTESIAN_POINT ( 'NONE', ( 20.20987113290345100, -7.999433903641630600, 29.44235213665995600 ) ) ; +#6481 = CARTESIAN_POINT ( 'NONE', ( 4.995621487296729900, -19.99908791066449300, -11.70708204317020700 ) ) ; +#6482 = CARTESIAN_POINT ( 'NONE', ( 19.94205019309342600, -33.35025653084936400, 26.50741664928542800 ) ) ; +#6483 = CARTESIAN_POINT ( 'NONE', ( 8.933979477831471200, -93.13549189012783800, 20.50024107806652300 ) ) ; +#6484 = CARTESIAN_POINT ( 'NONE', ( 24.97955438550423300, -30.66267912178171100, 28.85661217710848100 ) ) ; +#6485 = EDGE_CURVE ( 'NONE', #2194, #2800, #4317, .T. ) ; +#6486 = CARTESIAN_POINT ( 'NONE', ( 10.45311325562588700, -15.26254396393190900, -24.95218680415350200 ) ) ; +#6487 = CARTESIAN_POINT ( 'NONE', ( 35.44378582694141500, -31.16585002441184200, 25.81760092241301400 ) ) ; +#6488 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000900, 20.69000000000000100 ) ) ; +#6489 = CARTESIAN_POINT ( 'NONE', ( 14.25383358833809300, -16.29603904050128100, 23.88983844556582500 ) ) ; +#6490 = CARTESIAN_POINT ( 'NONE', ( 5.256320291445913300, -30.03500415534576400, 22.11349758901727800 ) ) ; +#6491 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999989300, -10.00001763798971400, 7.987765591342412800 ) ) ; +#6492 = CARTESIAN_POINT ( 'NONE', ( 4.999999999998041600, -94.33857163534429400, 4.255063462586571500 ) ) ; +#6493 = CC_DESIGN_APPROVAL ( #5788, ( #3724 ) ) ; +#6494 = ORIENTED_EDGE ( 'NONE', *, *, #5274, .F. ) ; +#6495 = CARTESIAN_POINT ( 'NONE', ( 39.71709212348428500, -19.83216774647988200, 10.97917940668586200 ) ) ; +#6496 = ADVANCED_FACE ( 'NONE', ( #12102 ), #3984, .T. ) ; +#6497 = ORIENTED_EDGE ( 'NONE', *, *, #8222, .T. ) ; +#6498 = CARTESIAN_POINT ( 'NONE', ( 13.73107212557135000, -95.07596123493894400, 8.644340388078795500 ) ) ; +#6499 = CARTESIAN_POINT ( 'NONE', ( 33.45186989916256000, -31.03663547725344800, 27.05092796676318300 ) ) ; +#6500 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6501 = CARTESIAN_POINT ( 'NONE', ( 18.75288665924096800, -7.999110319551526500, 29.40597627750098700 ) ) ; +#6502 = CARTESIAN_POINT ( 'NONE', ( 35.63311347169748400, -31.16972187331602100, 25.67459477931107900 ) ) ; +#6503 = CARTESIAN_POINT ( 'NONE', ( 6.011892742093376500, -93.66222730502941800, 4.589318382292514500 ) ) ; +#6504 = CARTESIAN_POINT ( 'NONE', ( 12.73993477680813900, -30.80099681663384100, 27.61254823823493300 ) ) ; +#6505 = CARTESIAN_POINT ( 'NONE', ( 8.942130120506632800, -30.19320144049968500, 25.82045886457951400 ) ) ; +#6506 = CARTESIAN_POINT ( 'NONE', ( 33.45795823902999900, -29.00785338947783700, 27.50591273516519000 ) ) ; +#6507 = CARTESIAN_POINT ( 'NONE', ( 34.88257870430204800, -11.27348508062120300, 24.77545022075679900 ) ) ; +#6508 = ORIENTED_EDGE ( 'NONE', *, *, #6406, .F. ) ; +#6509 = ADVANCED_FACE ( 'NONE', ( #9454 ), #2094, .F. ) ; +#6510 = CARTESIAN_POINT ( 'NONE', ( 38.06649955037960400, -30.74481994049850900, 23.78172541768048000 ) ) ; +#6511 = CARTESIAN_POINT ( 'NONE', ( 35.13864618075759000, -29.86712177815638800, 26.26609425388799200 ) ) ; +#6512 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122091300, -0.1736481776669239500 ) ) ; +#6513 = CARTESIAN_POINT ( 'NONE', ( 35.93318976332411600, -31.16957923119290500, 25.43366519347004800 ) ) ; +#6514 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -95.78490438491252200, 4.330279031978648200 ) ) ; +#6515 = ORIENTED_EDGE ( 'NONE', *, *, #3131, .F. ) ; +#6516 = CARTESIAN_POINT ( 'NONE', ( 39.86655562704012100, -29.01046481468816700, 15.85157161389983600 ) ) ; +#6517 = CARTESIAN_POINT ( 'NONE', ( 7.119836176366215200, -29.53146275251353700, 24.21729056282055100 ) ) ; +#6518 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342981900, 27.93782961424065500 ) ) ; +#6519 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -31.29513776008465000, 28.74509265499354200 ) ) ; +#6520 = CIRCLE ( 'NONE', #5445, 1.200000000000008400 ) ; +#6521 = CARTESIAN_POINT ( 'NONE', ( 38.98106837350988500, -30.57471582842764600, 21.70538457697643900 ) ) ; +#6522 = ORIENTED_EDGE ( 'NONE', *, *, #12735, .F. ) ; +#6523 = CARTESIAN_POINT ( 'NONE', ( 15.87696734898683100, -7.995781971385254000, 29.03181843794773800 ) ) ; +#6524 = CARTESIAN_POINT ( 'NONE', ( 3.947666577006773800, -17.90211533330121100, -11.75852341110354300 ) ) ; +#6525 = CARTESIAN_POINT ( 'NONE', ( 44.97167428080928200, 9.894175532731916100, -16.11130155685650000 ) ) ; +#6526 = CARTESIAN_POINT ( 'NONE', ( 7.300291254196345400, -97.43668338074816400, 18.95626174933562100 ) ) ; +#6527 = CARTESIAN_POINT ( 'NONE', ( 38.95275017414397900, -28.87176579667352200, 21.75731964078544000 ) ) ; +#6528 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, 3.189999999999994200 ) ) ; +#6529 = CARTESIAN_POINT ( 'NONE', ( 36.03072633999253300, -31.16852827279160800, 25.35300749829803400 ) ) ; +#6530 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -5.000000000000000900, -23.00000000000000000 ) ) ; +#6531 = CARTESIAN_POINT ( 'NONE', ( 16.66041585552342900, -18.13510505412223800, 23.56556148806051400 ) ) ; +#6532 = SPHERICAL_SURFACE ( 'NONE', #9796, 2.500000000000000000 ) ; +#6533 = CARTESIAN_POINT ( 'NONE', ( 6.136305538662496100, -28.96848477567175100, 22.31529492484109800 ) ) ; +#6534 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000700, -8.819740026867442900, 7.982480013610016000 ) ) ; +#6535 = CARTESIAN_POINT ( 'NONE', ( 10.85350140746413000, -30.93678000340209900, 26.75756450929822700 ) ) ; +#6536 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#6538 = AXIS2_PLACEMENT_3D ( 'NONE', #6986, #7886, #11887 ) ; +#6537 = CARTESIAN_POINT ( 'NONE', ( 18.16428857736118700, -95.07596123493894400, 9.913781257752065200 ) ) ; +#6539 = CARTESIAN_POINT ( 'NONE', ( 33.26994385996472700, -30.59961558047059800, 27.25348250854286300 ) ) ; +#6540 = DIRECTION ( 'NONE', ( -0.04443732050959708900, -0.9990121743732292000, 2.741296477686340700E-014 ) ) ; +#6541 = CARTESIAN_POINT ( 'NONE', ( 5.099645364425723100, -10.00066165073921800, 25.85757985759367000 ) ) ; +#6542 = CARTESIAN_POINT ( 'NONE', ( 36.21313010688029300, -31.16481239311095000, 25.19826377982932500 ) ) ; +#6543 = CARTESIAN_POINT ( 'NONE', ( 4.999999999994622100, -94.55768749322287200, 4.933039381729081200 ) ) ; +#6544 = CARTESIAN_POINT ( 'NONE', ( 12.74051402237293800, -30.64064826655860700, 27.63557845724054500 ) ) ; +#6545 = FACE_OUTER_BOUND ( 'NONE', #6270, .T. ) ; +#6546 = CARTESIAN_POINT ( 'NONE', ( 9.249567459127137100, -31.16774042936900800, 25.58273956992674400 ) ) ; +#6547 = CARTESIAN_POINT ( 'NONE', ( 36.07810624317503600, -28.44677993672273400, 24.09817986793936500 ) ) ; +#6548 = CARTESIAN_POINT ( 'NONE', ( 35.03378835305775100, -10.00364020613557900, 24.99935813344296100 ) ) ; +#6549 = ORIENTED_EDGE ( 'NONE', *, *, #5433, .T. ) ; +#6550 = CARTESIAN_POINT ( 'NONE', ( 37.86771345263044700, -29.32361510828526700, 24.01981861027986700 ) ) ; +#6551 = CARTESIAN_POINT ( 'NONE', ( 35.23630392884065500, -30.48580206248675900, 26.31929464265683200 ) ) ; +#6552 = AXIS2_PLACEMENT_3D ( 'NONE', #1890, #9022, #10032 ) ; +#6553 = CARTESIAN_POINT ( 'NONE', ( 36.29937280729463800, -31.16214703728373400, 25.12307272268765200 ) ) ; +#6554 = CARTESIAN_POINT ( 'NONE', ( 6.146861196348235800, -93.88192333451057400, 5.240109433608187900 ) ) ; +#6555 = CARTESIAN_POINT ( 'NONE', ( 39.36851722924932100, -29.39978470367395100, 10.84315608312304800 ) ) ; +#6556 = ADVANCED_FACE ( 'NONE', ( #11802 ), #1333, .T. ) ; +#6557 = CARTESIAN_POINT ( 'NONE', ( 7.383018147500322000, -30.93690273667482800, 24.03075067623188200 ) ) ; +#6558 = CARTESIAN_POINT ( 'NONE', ( 20.05169821895794200, -27.96429675855989300, 27.45736485622402900 ) ) ; +#6559 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983000, 27.93782961424065500 ) ) ; +#6560 = CARTESIAN_POINT ( 'NONE', ( 24.85960558233109200, -33.35446909076589600, 26.50697697917620100 ) ) ; +#6561 = EDGE_CURVE ( 'NONE', #4543, #1531, #12847, .T. ) ; +#6562 = VECTOR ( 'NONE', #4010, 1000.000000000000000 ) ; +#6563 = CARTESIAN_POINT ( 'NONE', ( 39.42031906483130400, -29.15239411466204400, 22.00680230230041400 ) ) ; +#6564 = CARTESIAN_POINT ( 'NONE', ( 14.45816827794529000, -7.992776358529525300, 28.69394104150377000 ) ) ; +#6565 = CARTESIAN_POINT ( 'NONE', ( 17.14070171165608900, -100.0000000000000300, 6.300051934314566000 ) ) ; +#6566 = ADVANCED_FACE ( 'NONE', ( #12413 ), #10569, .T. ) ; +#6567 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999983100, -90.35119345079689900, -3.700829972692534700 ) ) ; +#6568 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000700, -8.815190830915558000, 8.775118551461860200 ) ) ; +#6569 = CARTESIAN_POINT ( 'NONE', ( 33.30833408774017800, -12.49999999999999600, -19.75764435325120200 ) ) ; +#6570 = CARTESIAN_POINT ( 'NONE', ( 36.54397509799367300, -31.15231295139510300, 24.90488303031022000 ) ) ; +#6571 = CARTESIAN_POINT ( 'NONE', ( 33.79584592648012600, -17.59570101572488500, -24.83460354159119300 ) ) ; +#6572 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#6573 = CARTESIAN_POINT ( 'NONE', ( 5.864553493079776900, -30.48430824350140300, 22.35070095881052800 ) ) ; +#6574 = VECTOR ( 'NONE', #7692, 1000.000000000000000 ) ; +#6575 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000015100, -27.09143239524032200, 6.754920151478385600 ) ) ; +#6576 = CARTESIAN_POINT ( 'NONE', ( 10.84367856485254000, -30.43811615314686500, 26.86620407186302400 ) ) ; +#6577 = EDGE_CURVE ( 'NONE', #10111, #11537, #3678, .T. ) ; +#6578 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #11425, #1732, #1545 ), + ( #1500, #1477, #1460 ), + ( #1438, #1425, #1400 ), + ( #1382, #1354, #1335 ), + ( #1311, #1291, #1252 ), + ( #1203, #1164, #1147 ), + ( #1073, #1029, #990 ), + ( #974, #948, #927 ), + ( #899, #773, #728 ), + ( #708, #671, #626 ), + ( #599, #581, #557 ), + ( #543, #507, #438 ), + ( #424, #404, #386 ), + ( #363, #342, #314 ), + ( #291, #263, #221 ), + ( #201, #154, #110 ), + ( #90, #65, #522 ), + ( #13042, #12648, #12843 ), + ( #12604, #12321, #11763 ), + ( #11843, #11681, #11604 ), + ( #11479, #11147, #11234 ), + ( #11102, #11052, #11190 ), + ( #10745, #9906, #10393 ), + ( #8525, #8343, #8440 ), + ( #10701, #8147, #7543 ), + ( #7409, #7455, #7363 ), + ( #7210, #7166, #6621 ), + ( #6669, #6340, #6575 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.005285763726966879700, 0.007273782968702880400, 0.009261802210438881100, 0.01323784069391088400, 0.01423185031477888400, 0.01522585993564688600, 0.01721387917738288800, 0.01920189841911888700, 0.02118991766085488700, 0.02317793690259088700, 0.02516595614432688700, 0.02914199462779889000, 0.03311803311127089300, 0.03709407159474289300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7124519352030727100, 1.000000000000000000), + ( 1.000000000000000000, 0.7136330319072256000, 1.000000000000000000), + ( 1.000000000000000000, 0.7150275341995140400, 1.000000000000000000), + ( 1.000000000000000000, 0.7183649809151939600, 1.000000000000000000), + ( 1.000000000000000000, 0.7202871303653509700, 1.000000000000000000), + ( 1.000000000000000000, 0.7270026759634531400, 1.000000000000000000), + ( 1.000000000000000000, 0.7326600934014038100, 1.000000000000000000), + ( 1.000000000000000000, 0.7428939941166488000, 1.000000000000000000), + ( 1.000000000000000000, 0.7451064778928836500, 1.000000000000000000), + ( 1.000000000000000000, 0.7499398680588885700, 1.000000000000000000), + ( 1.000000000000000000, 0.7525690059069404200, 1.000000000000000000), + ( 1.000000000000000000, 0.7611242657726274800, 1.000000000000000000), + ( 1.000000000000000000, 0.7677370406144927700, 1.000000000000000000), + ( 1.000000000000000000, 0.7832104794024794500, 1.000000000000000000), + ( 1.000000000000000000, 0.7920918378298491500, 1.000000000000000000), + ( 1.000000000000000000, 0.8118135150490575200, 1.000000000000000000), + ( 1.000000000000000000, 0.8226317041579446200, 1.000000000000000000), + ( 1.000000000000000000, 0.8450857857689183500, 1.000000000000000000), + ( 1.000000000000000000, 0.8567474140675951400, 1.000000000000000000), + ( 1.000000000000000000, 0.8793555075012119400, 1.000000000000000000), + ( 1.000000000000000000, 0.8903432588892475900, 1.000000000000000000), + ( 1.000000000000000000, 0.9214899866915680100, 1.000000000000000000), + ( 1.000000000000000000, 0.9397934682865899400, 1.000000000000000000), + ( 1.000000000000000000, 0.9696072511759655800, 1.000000000000000000), + ( 1.000000000000000000, 0.9809610467248440800, 1.000000000000000000), + ( 1.000000000000000000, 0.9961753807916488000, 1.000000000000000000), + ( 1.000000000000000000, 1.000002346639801600, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#6579 = EDGE_CURVE ( 'NONE', #4218, #9692, #1010, .T. ) ; +#6580 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000900, 18.70000000000001400 ) ) ; +#6581 = CARTESIAN_POINT ( 'NONE', ( 33.26210739816789900, -30.94744854197400800, 27.17383763640986100 ) ) ; +#6582 = CARTESIAN_POINT ( 'NONE', ( 37.92837326626730700, -34.63266489681078000, 13.15255935183336400 ) ) ; +#6583 = CARTESIAN_POINT ( 'NONE', ( 11.71870141259156200, -7.984208958222963800, 27.73083266785871700 ) ) ; +#6584 = CARTESIAN_POINT ( 'NONE', ( 36.68823189789553400, -31.14331286917907000, 24.76929837501267800 ) ) ; +#6585 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -96.23082734599096000, 5.350767952454490700 ) ) ; +#6586 = CARTESIAN_POINT ( 'NONE', ( 12.94455048172603800, -30.86054564849335000, 27.67128190349889700 ) ) ; +#6587 = CARTESIAN_POINT ( 'NONE', ( 9.104669312491832800, -30.43969969132794200, 25.92838264607699000 ) ) ; +#6588 = VECTOR ( 'NONE', #1982, 1000.000000000000000 ) ; +#6589 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -89.20772034660431900, 11.03354182248334700 ) ) ; +#6590 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000900, 17.50000000000000400 ) ) ; +#6591 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5180, #11938, #11867, #11852 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976806900E-018, 0.006811713338456267000 ), + .UNSPECIFIED. ) ; +#6592 = CARTESIAN_POINT ( 'NONE', ( 38.19449089091672500, -30.37724781314063400, 24.11273767335433100 ) ) ; +#6593 = CARTESIAN_POINT ( 'NONE', ( 0.5296536230619671700, -11.00332950180540300, -12.66472281204770700 ) ) ; +#6594 = ORIENTED_EDGE ( 'NONE', *, *, #9503, .T. ) ; +#6595 = CARTESIAN_POINT ( 'NONE', ( 35.14329969082943000, -31.13955658536566100, 26.04946819865986300 ) ) ; +#6596 = ORIENTED_EDGE ( 'NONE', *, *, #2235, .T. ) ; +#6597 = CARTESIAN_POINT ( 'NONE', ( 34.49987697003822300, -15.63868625643722200, -24.93149349800660600 ) ) ; +#6598 = FACE_OUTER_BOUND ( 'NONE', #12435, .T. ) ; +#6599 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6600 = CARTESIAN_POINT ( 'NONE', ( 36.81735877284275200, -31.13322514713213700, 24.64349166545585500 ) ) ; +#6601 = CARTESIAN_POINT ( 'NONE', ( 2.207106781186547500, 12.00000000000000000, -23.96446609406725500 ) ) ; +#6602 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000002100, -27.09143239524034300, 6.754920151478381200 ) ) ; +#6603 = CARTESIAN_POINT ( 'NONE', ( 7.082436860232611800, -29.99754038004094500, 24.47548221243495800 ) ) ; +#6604 = PLANE ( 'NONE', #2879 ) ; +#6605 = CARTESIAN_POINT ( 'NONE', ( 34.96779545965576100, -20.32149963875679400, -23.67186603788615800 ) ) ; +#6606 = CARTESIAN_POINT ( 'NONE', ( 24.99999999386482900, -19.13172188299338600, 23.38983105170242300 ) ) ; +#6607 = CARTESIAN_POINT ( 'NONE', ( 39.42034705452151400, -30.37093366328124600, 21.79038518929717900 ) ) ; +#6608 = ORIENTED_EDGE ( 'NONE', *, *, #4236, .T. ) ; +#6609 = CARTESIAN_POINT ( 'NONE', ( 6.321526062890413300, -10.20581393442706300, 22.69791016778895100 ) ) ; +#6610 = CARTESIAN_POINT ( 'NONE', ( 4.998690766694611700, -22.38930924282195500, -12.15741243803145500 ) ) ; +#6611 = ORIENTED_EDGE ( 'NONE', *, *, #11095, .T. ) ; +#6612 = CARTESIAN_POINT ( 'NONE', ( 18.88562338553218100, -95.07596123493895800, 16.93028997941122100 ) ) ; +#6613 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#6614 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -8.819645670697410000, 8.005330931324026600 ) ) ; +#6615 = EDGE_CURVE ( 'NONE', #10469, #2809, #9135, .T. ) ; +#6616 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.00000000000000000, 0.0000000000000000000 ) ) ; +#6617 = CARTESIAN_POINT ( 'NONE', ( 36.82105258852200100, -31.13293543865222200, 24.63989030736788200 ) ) ; +#6618 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -19.99999999999990400, 0.0000000000000000000 ) ) ; +#6619 = CARTESIAN_POINT ( 'NONE', ( 16.59669889437017800, -19.15395153030917500, 22.99691017394808800 ) ) ; +#6620 = CARTESIAN_POINT ( 'NONE', ( 5.864476982238638700, -29.23671884326320500, 22.56742894663552300 ) ) ; +#6621 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000015100, -26.55300411165399100, 7.631701365276808400 ) ) ; +#6622 = VERTEX_POINT ( 'NONE', #4751 ) ; +#6623 = CARTESIAN_POINT ( 'NONE', ( 10.83060668048037000, -100.0000000000000100, -34.30055536053079400 ) ) ; +#6624 = CARTESIAN_POINT ( 'NONE', ( 10.96775415837042400, -31.07606969209897600, 26.74569857546837400 ) ) ; +#6625 = ORIENTED_EDGE ( 'NONE', *, *, #10837, .T. ) ; +#6626 = CARTESIAN_POINT ( 'NONE', ( 0.08476444025184348700, -5.947539116075323500, -20.09471542074037100 ) ) ; +#6627 = ADVANCED_FACE ( 'NONE', ( #6409 ), #6077, .T. ) ; +#6628 = CARTESIAN_POINT ( 'NONE', ( 33.16308169072717500, -30.47262166067485700, 27.30169044570038400 ) ) ; +#6629 = ORIENTED_EDGE ( 'NONE', *, *, #4055, .T. ) ; +#6630 = CARTESIAN_POINT ( 'NONE', ( 30.35592955888716600, -38.92039892725664900, 18.90746307147555100 ) ) ; +#6631 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5641, #3634, #6727, #653, #7762, #1652, #8792, #2656, #9787, #3674 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( -1.840409568810200200E-005, 0.0009552021979804891500, 0.001928808491649080300, 0.002902414785317671400, 0.003876021078986262700 ), + .UNSPECIFIED. ) ; +#6632 = CARTESIAN_POINT ( 'NONE', ( 7.013833916209555300, -12.65558039925433900, 21.58102521369825100 ) ) ; +#6633 = CARTESIAN_POINT ( 'NONE', ( 36.82671958230904600, -31.13248817828924700, 24.63435897816463800 ) ) ; +#6634 = CARTESIAN_POINT ( 'NONE', ( 5.000000000002760500, -94.82601771543568200, 5.941839880699656200 ) ) ; +#6635 = CARTESIAN_POINT ( 'NONE', ( 12.94473598716192900, -30.73328109147184500, 27.69495781783982800 ) ) ; +#6636 = ORIENTED_EDGE ( 'NONE', *, *, #12380, .T. ) ; +#6637 = CARTESIAN_POINT ( 'NONE', ( 9.249941200903371900, -29.69927195644235200, 25.84111729011022300 ) ) ; +#6638 = ORIENTED_EDGE ( 'NONE', *, *, #6118, .F. ) ; +#6639 = CARTESIAN_POINT ( 'NONE', ( 17.89648462931253200, -25.65038001506968600, 22.13090628726430600 ) ) ; +#6640 = CARTESIAN_POINT ( 'NONE', ( 2.943469517853135800, -9.308671727601565100, -23.92546305775048400 ) ) ; +#6641 = AXIS2_PLACEMENT_3D ( 'NONE', #189, #176, #165 ) ; +#6642 = ADVANCED_FACE ( 'NONE', ( #697 ), #8233, .T. ) ; +#6643 = CARTESIAN_POINT ( 'NONE', ( 37.66768209181840600, -29.19944815230323700, 24.05200462815850700 ) ) ; +#6644 = EDGE_LOOP ( 'NONE', ( #6148, #6479, #6638, #6947 ) ) ; +#6645 = CARTESIAN_POINT ( 'NONE', ( 2.602085213965210600E-015, -8.011571338478976400, -15.13410397281469200 ) ) ; +#6646 = CARTESIAN_POINT ( 'NONE', ( 35.02726776825573300, -30.30550322941920500, 26.42943061057598400 ) ) ; +#6647 = VERTEX_POINT ( 'NONE', #9893 ) ; +#6648 = CARTESIAN_POINT ( 'NONE', ( 6.353999029063293100, -94.17920530917899700, 6.208122608112919500 ) ) ; +#6649 = VERTEX_POINT ( 'NONE', #10065 ) ; +#6650 = VERTEX_POINT ( 'NONE', #3940 ) ; +#6651 = CARTESIAN_POINT ( 'NONE', ( 7.611105565270914800, -31.07150724408683100, 24.05381379477893200 ) ) ; +#6652 = CARTESIAN_POINT ( 'NONE', ( 11.75500593597307200, -30.90254050788591700, 27.25515540007415900 ) ) ; +#6653 = CARTESIAN_POINT ( 'NONE', ( 5.000000000016016500, -94.98908009216586400, 13.36371854080961400 ) ) ; +#6654 = CARTESIAN_POINT ( 'NONE', ( 38.90709883134861300, -28.95670028072374400, 22.21379308474676200 ) ) ; +#6655 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 3, ( + ( #1741, #7899, #1780, #8921, #2790, #9922, #3795, #10935, #4825, #11944, #5860, #12898, #6903, #823, #7946, #1822, #8960, #2837, #9966, #3840, #10984, #4870, #11980, #5901, #12934, #6950, #861, #7992, #1871, #9003 ), + ( #2882, #10015, #3885, #11026, #4919, #12027, #5945, #12979, #7001, #909, #8032, #1916, #9052, #2925, #10053, #3928, #11072, #4960, #12068, #5992, #13018, #7047, #957, #8075, #1954, #9095, #2973, #10094, #3970, #11122 ), + ( #5000, #12106, #6037, #13063, #7090, #997, #8119, #2001, #9138, #3017, #10142, #4011, #11164, #5051, #12148, #6081, #30, #7136, #1036, #8163, #2049, #9178, #3059, #10192, #4061, #11207, #5095, #12194, #6125, #74 ), + ( #7184, #1084, #8207, #2091, #9224, #3097, #10233, #4110, #11254, #5132, #12238, #6173, #120, #7228, #1132, #8257, #2131, #9268, #3145, #10274, #4156, #11301, #5179, #12278, #6217, #164, #7273, #1174, #8305, #2175 ), + ( #9309, #3190, #10320, #4199, #11342, #5225, #12320, #6259, #212, #7317, #1214, #8342, #2217, #9352, #3228, #10364, #4241, #11387, #5266, #12363, #6308, #254, #7362, #1259, #8387, #2262, #9405, #3277, #10407, #4286 ), + ( #11432, #5314, #12402, #6353, #301, #7407, #1303, #8439, #2299, #9444, #3324, #10454, #4323, #11478, #5365, #12445, #6400, #356, #7454, #1344, #8486, #2343, #9488, #3365, #10503, #4368, #11517, #5413, #12492, #6444 ), + ( #396, #7499, #1389, #8523, #2385, #9531, #3402, #10541, #4418, #11562, #5455, #12531, #6490, #431, #7542, #1432, #8565, #2422, #9573, #3448, #10579, #4456, #11603, #5497, #12565, #6533, #473, #7579, #1472, #8612 ), + ( #2463, #9613, #3487, #10619, #4492, #11646, #5541, #12603, #6573, #515, #7622, #1507, #8650, #2511, #9653, #3526, #10660, #4538, #11680, #5580, #12647, #6620, #549, #7664, #1553, #8692, #2555, #9696, #3569, #10699 ), + ( #4583, #11726, #5622, #12685, #6668, #587, #7704, #1599, #8735, #2595, #9737, #3618, #10744, #4624, #11762, #5672, #12723, #6711, #635, #7748, #1636, #8778, #2638, #9773, #3660, #10790, #4669, #11801, #5718, #12764 ), + ( #6752, #678, #7797, #1680, #8818, #2685, #9821, #3695, #10830, #4719, #11842, #5756, #12803, #6798, #717, #7839, #1722, #8855, #2729, #9863, #3734, #10869, #4764, #11883, #5798, #12842, #6847, #762, #7880, #1765 ), + ( #8902, #2770, #9904, #3778, #10915, #4807, #11925, #5842, #12882, #6886, #806, #7926, #1802, #8943, #2818, #9948, #3823, #10963, #4852, #11963, #5886, #12920, #6929, #845, #7973, #1851, #8985, #2863, #9995, #3865 ), + ( #11006, #4898, #12006, #5926, #12957, #6981, #889, #8013, #1899, #9032, #2908, #10037, #3910, #11051, #4941, #12046, #5970, #13001, #7030, #936, #8054, #1937, #9076, #2951, #10074, #3952, #11101, #4982, #12089, #6018 ), + ( #13041, #7072, #981, #8100, #1981, #9117, #2999, #10120, #3994, #11146, #5032, #12130, #6063, #11, #7117, #1020, #8146, #2027, #9158, #3042, #10173, #4039, #11189, #5077, #12176, #6106, #55, #7165, #1064, #8188 ), + ( #2073, #9206, #3081, #10214, #4090, #11233, #5118, #12218, #6154, #99, #7208, #1113, #8238, #2117, #9251, #3124, #10255, #4138, #11282, #5158, #12262, #6199, #146, #7251, #1156, #8285, #2157, #9290, #3172, #10300 ), + ( #4178, #11324, #5207, #12304, #6242, #192, #7300, #1193, #8326, #2199, #9332, #3214, #10347, #4223, #11365, #5249, #12346, #6289, #239, #7344, #1242, #8366, #2245, #9387, #3258, #10392, #4270, #11416, #5296, #12387 ), + ( #6339, #283, #7391, #1285, #8423, #2282, #9430, #3310, #10439, #4312, #11463, #5347, #12430, #6382, #336, #7438, #1329, #8469, #2330, #9472, #3349, #10485, #4353, #11502, #5395, #12473, #6428, #380, #7485, #1373 ), + ( #8509, #2370, #9514, #3388, #10526, #4400, #11544, #5438, #12513, #6472, #418, #7525, #1420, #8550, #2408, #9558, #3430, #10562, #4442, #11587, #5481, #12553, #6517, #455, #7565, #1455, #8597, #2444, #9597, #3473 ), + ( #10605, #4478, #11628, #5524, #12588, #6557, #503, #7606, #1494, #8635, #2495, #9637, #3511, #10645, #4521, #11667, #5568, #12631, #6603, #537, #7648, #1536, #8677, #2539, #9681, #3553, #10686, #4566, #11708, #5607 ), + ( #12671, #6651, #575, #7690, #1585, #8718, #2583, #9722, #3603, #10728, #4611, #11747, #5656, #12710, #6696, #619, #7736, #1624, #8762, #2620, #9761, #3648, #10774, #4653, #11787, #5700, #12749, #6739, #666, #7780 ), + ( #1667, #8803, #2670, #9802, #3683, #10814, #4703, #11829, #5741, #12786, #6780, #702, #7824, #1707, #8841, #2715, #9847, #3717, #10855, #4747, #11869, #5779, #12828, #6828, #745, #7864, #1751, #8886, #2754, #9889 ), + ( #3761, #10897, #4791, #11910, #5828, #12869, #6874, #790, #7908, #1787, #8930, #2801, #9931, #3807, #10946, #4834, #11950, #5870, #12906, #6912, #832, #7956, #1831, #8970, #2847, #9979, #3849, #10993, #4879, #11989 ), + ( #5910, #12942, #6961, #869, #8002, #1880, #9013, #2891, #10024, #3895, #11034, #4928, #12034, #5954, #12986, #7014, #919, #8039, #1925, #9063, #2933, #10060, #3936, #11084, #4967, #12074, #6001, #13024, #7059, #966 ), + ( #8087, #1964, #9102, #2980, #10104, #3979, #11130, #5015, #12114, #6047, #13070, #7098, #1005, #8129, #2011, #9145, #3026, #10152, #4022, #11174, #5063, #12159, #6090, #38, #7146, #1047, #8171, #2057, #9188, #3068 ), + ( #10200, #4072, #11216, #5104, #12201, #6135, #83, #7195, #1093, #8219, #2101, #9234, #3108, #10242, #4121, #11263, #5143, #12248, #6184, #131, #7236, #1140, #8268, #2141, #9275, #3156, #10285, #4165, #11309, #5188 ), + ( #12287, #6227, #177, #7283, #1182, #8313, #2183, #9318, #3200, #10331, #4211, #11350, #5234, #12331, #6273, #224, #7330, #1228, #8354, #2230, #9368, #3243, #10377, #4256, #11401, #5282, #12374, #6321, #268, #7374 ), + ( #1271, #8402, #2271, #9418, #3293, #10423, #4297, #11447, #5329, #12416, #6366, #319, #7421, #1315, #8452, #2314, #9457, #3335, #10470, #4339, #11489, #5382, #12457, #6412, #369, #7470, #1358, #8497, #2359, #9500 ), + ( #3375, #10516, #4382, #11531, #5425, #12502, #6457, #408, #7513, #1405, #8535, #2397, #9544, #3416, #10552, #4428, #11574, #5466, #12541, #6505, #442, #7556, #1444, #8581, #2430, #9585, #3458, #10592, #4467, #11616 ), + ( #5511, #12576, #6546, #487, #7593, #1482, #8624, #2480, #9624, #3500, #10632, #4505, #11656, #5556, #12617, #6587, #527, #7636, #1521, #8663, #2525, #9667, #3539, #10672, #4549, #11694, #5595, #12661, #6637, #560 ), + ( #7678, #1568, #8703, #2567, #9708, #3586, #10710, #4598, #11736, #5640, #12696, #6682, #603, #7718, #1611, #8750, #2608, #9750, #3633, #10759, #4637, #11776, #5684, #12736, #6726, #652, #7761, #1650, #8791, #2655 ), + ( #9786, #3673, #10804, #4686, #11811, #5731, #12774, #6767, #690, #7811, #1693, #8830, #2700, #9833, #3706, #10844, #4733, #11855, #5767, #12816, #6812, #732, #7854, #1736, #8867, #2741, #9877, #3747, #10881, #4779 ), + ( #11896, #5811, #12854, #6861, #776, #7894, #1776, #8917, #2784, #9917, #3791, #10930, #4820, #11940, #5856, #12894, #6899, #819, #7941, #1817, #8956, #2833, #9961, #3835, #10980, #4866, #11975, #5897, #12932, #6945 ), + ( #857, #7988, #1866, #8999, #2877, #10012, #3879, #11021, #4914, #12022, #5940, #12975, #6997, #903, #8027, #1912, #9047, #2921, #10050, #3924, #11067, #4956, #12063, #5987, #13013, #7043, #953, #8070, #1949, #9090 ), + ( #2968, #10089, #3965, #11118, #4995, #12101, #6032, #13057, #7087, #994, #8116, #1996, #9134, #3012, #10137, #4007, #11160, #5047, #12144, #6076, #26, #7132, #1033, #8158, #2046, #9173, #3054, #10187, #4057, #11203 ), + ( #5090, #12191, #6120, #70, #7179, #1079, #8203, #2086, #9220, #3092, #10228, #4105, #11249, #5128, #12233, #6169, #115, #7223, #1128, #8253, #2128, #9264, #3142, #10270, #4151, #11296, #5174, #12274, #6213, #160 ), + ( #7268, #1169, #8300, #2170, #9305, #3185, #10316, #4194, #11338, #5220, #12316, #6256, #208, #7314, #1209, #8337, #2212, #9347, #3225, #10359, #4237, #11382, #5261, #12358, #6303, #250, #7357, #1256, #8383, #2258 ), + ( #9401, #3274, #10582, #4458, #11605, #5500, #12567, #6535, #475, #7582, #1474, #8613, #2466, #9616, #3489, #10621, #4495, #11648, #5543, #12606, #6576, #517, #7624, #1510, #8651, #2513, #9656, #3529, #10662, #4540 ), + ( #11683, #5582, #12650, #6624, #553, #7667, #1556, #8695, #2558, #9699, #3573, #10703, #4586, #11728, #5626, #12688, #6670, #591, #7708, #1603, #8738, #2598, #9740, #3621, #10747, #4628, #11766, #5675, #12727, #6714 ), + ( #638, #7751, #1640, #8782, #2641, #9777, #3663, #10792, #4672, #11804, #5722, #12765, #6755, #681, #7800, #1683, #8821, #2689, #9824, #3698, #10833, #4722, #11845, #5760, #12807, #6801, #720, #7842, #1725, #8858 ), + ( #2733, #9867, #3737, #10872, #4767, #11886, #5801, #12845, #6851, #765, #7883, #1766, #8905, #2773, #9908, #3782, #10918, #4810, #11928, #5845, #12885, #6890, #809, #7929, #1805, #8945, #2820, #9951, #3826, #10967 ), + ( #4855, #11966, #5888, #12922, #6932, #848, #7977, #1854, #8988, #2867, #9998, #3868, #11010, #4902, #12009, #5929, #12960, #6984, #891, #8017, #1903, #9035, #2910, #10040, #3913, #11055, #4946, #12051, #5974, #13005 ), + ( #7032, #940, #8058, #1941, #9081, #2954, #10078, #3956, #11105, #4985, #12093, #6023, #13045, #7075, #984, #8104, #1985, #9121, #3001, #10123, #3998, #11149, #5036, #12134, #6068, #15, #7120, #1024, #8150, #2031 ), + ( #9161, #3046, #10177, #4043, #11192, #5081, #12180, #6109, #60, #7169, #1068, #8192, #2077, #9210, #3085, #10218, #4094, #11237, #5122, #12222, #6158, #103, #7213, #1116, #8242, #2121, #9255, #3128, #10259, #4143 ), + ( #11286, #5161, #12265, #6202, #149, #7254, #1160, #8289, #2161, #9294, #3176, #10304, #4181, #11328, #5211, #12306, #6246, #196, #7303, #1197, #8330, #2202, #9336, #3218, #10351, #4227, #11369, #5253, #12350, #6292 ), + ( #243, #7348, #1247, #8371, #2249, #9391, #3262, #10396, #4274, #11420, #5299, #2229, #9366, #3242, #10376, #4255, #11399, #5281, #12373, #6319, #267, #7373, #1270, #8400, #2270, #9417, #3291, #10422, #4296, #11446 ), + ( #5327, #12415, #6365, #317, #7420, #1313, #8451, #2312, #9456, #3334, #10468, #4338, #11488, #5380, #12456, #6411, #368, #7468, #1357, #8496, #2358, #9497, #3374, #10515, #4380, #11529, #5424, #12501, #6455, #407 ), + ( #7512, #1403, #8534, #2395, #9543, #3413, #10551, #4427, #11572, #5465, #12540, #6504, #440, #7555, #1443, #8578, #2429, #9583, #3457, #10589, #4466, #11615, #5509, #12574, #6544, #485, #7591, #1481, #8623, #2478 ), + ( #9623, #3497, #10631, #4503, #11655, #5554, #12615, #6586, #525, #7634, #1519, #8662, #2524, #9665, #3538, #10670, #4548, #11692, #5593, #12659, #6635, #559, #7676, #1567, #8701, #2565, #9707, #3584, #10709, #4596 ), + ( #11735, #5638, #12695, #6680, #601, #7717, #1610, #8748, #2606, #9749, #3632, #10756, #4636, #11774, #5683, #12734, #6725, #651, #7759, #1648, #8789, #2654, #9784, #3672, #10803, #4684, #11810, #5728, #12773, #6765 ), + ( #689, #7809, #1691, #8829, #2698, #9832, #3704, #10843, #4732, #11853, #5766, #12815, #6811, #730, #7853, #1735, #8866, #2740, #9875, #3746, #10879, #4777, #11895, #5810, #12853, #6859, #775, #7892, #1775, #8916 ), + ( #2783, #9916, #3790, #10928, #4818, #11939, #5855, #12892, #6898, #816, #7939, #1814, #8955, #2832, #9960, #3834, #10978, #4865, #11974, #5896, #12931, #6943, #855, #7984, #1864, #8996, #2875, #10010, #3878, #11020 ), + ( #4911, #12019, #5937, #12972, #6995, #901, #8026, #1910, #9046, #2918, #10049, #3923, #11066, #4955, #12059, #5986, #13012, #7041, #951, #8069, #1948, #9088, #2966, #10087, #3964, #11115, #4993, #12100, #6030, #13054 ), + ( #7084, #992, #8113, #1994, #9129, #3008, #10133, #4005, #11155, #5045, #12142, #6073, #21, #7129, #1031, #8156, #2041, #9170, #3051, #10182, #4053, #11200, #5087, #12187, #6116, #67, #7176, #1076, #8198, #2084 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 4, 2, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 1, 1, 2, 4 ), + ( 0.0000000000000000000, 0.01578425086691582400, 0.03156850173383164700, 0.06313700346766329400, 0.1262740069353265900, 0.1894110104029898800, 0.2209795121368215400, 0.2525480138706531800, 0.2602759697080681000, 0.3143716605699725700, 0.3761953072692919600, 0.4380189539686113500, 0.4689307773182710400, 0.4998426006679307400, 0.5311368624931085400, 0.5624311243182862400, 0.6250196479686418400, 0.6876081716189974500, 0.7189024334441751500, 0.7501966952693529500, 0.7814221083606838200, 0.8126475214520148000, 0.8750983476346765300, 0.9375491738173382700, 0.9687745869086691300, 1.000000000000000000 ), + ( 0.0000000000000000000, 0.001953125000000000000, 0.03125000000000000000, 0.06250000000000000000, 0.1250000000000000000, 0.2500000000000000000, 0.3750000000000000000, 0.4375000000000000000, 0.5000000000000000000, 0.5625000000000000000, 0.6250000000000000000, 0.7500000000000000000, 0.8750000000000000000, 0.9375000000000000000, 0.9687500000000000000, 0.9980468750000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#6656 = CARTESIAN_POINT ( 'NONE', ( 4.456497095826683200, -9.996933349001372100, 24.74088781406663200 ) ) ; +#6657 = CARTESIAN_POINT ( 'NONE', ( 5.003993907105961400, -20.02368322160333800, -12.14472643681939700 ) ) ; +#6658 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4671, #2772, #7928, #1804 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.004319146617188377900 ), + .UNSPECIFIED. ) ; +#6659 = ORIENTED_EDGE ( 'NONE', *, *, #13055, .T. ) ; +#6660 = ORIENTED_EDGE ( 'NONE', *, *, #4459, .F. ) ; +#6661 = CARTESIAN_POINT ( 'NONE', ( 6.914950101942014100, -94.81572196524351200, 8.755769211343304500 ) ) ; +#6662 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.819631228893783300, 8.005330848018788400 ) ) ; +#6663 = CARTESIAN_POINT ( 'NONE', ( 38.94931178141215600, -30.55092223628112100, 21.46123905850131000 ) ) ; +#6664 = EDGE_CURVE ( 'NONE', #1718, #6970, #3055, .T. ) ; +#6665 = ORIENTED_EDGE ( 'NONE', *, *, #5610, .T. ) ; +#6666 = CARTESIAN_POINT ( 'NONE', ( 36.83520669076883500, -31.13181493717713300, 24.62606750922312000 ) ) ; +#6667 = CARTESIAN_POINT ( 'NONE', ( 34.49635884323304700, -17.28145442795337400, -24.70395889518318800 ) ) ; +#6668 = CARTESIAN_POINT ( 'NONE', ( 6.381192024995738300, -30.75819079894045400, 22.49853733314219200 ) ) ; +#6669 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000015100, -27.09143239524033200, 6.754920151478379400 ) ) ; +#6670 = CARTESIAN_POINT ( 'NONE', ( 10.93555494756405900, -30.60402016088823300, 26.89792368192143400 ) ) ; +#6671 = CARTESIAN_POINT ( 'NONE', ( 39.74216895095555200, -25.10692011806100900, 10.01103898978553800 ) ) ; +#6672 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#6673 = CARTESIAN_POINT ( 'NONE', ( 33.16997736953157300, -30.80720919132295100, 27.25910000633243200 ) ) ; +#6674 = CARTESIAN_POINT ( 'NONE', ( 8.281517684960480400, -12.50000000000001100, 13.77811786161794300 ) ) ; +#6675 = CARTESIAN_POINT ( 'NONE', ( 10.39817139335809100, -7.978647601650873600, 27.10565012792714200 ) ) ; +#6676 = CIRCLE ( 'NONE', #3804, 3.189999999999995100 ) ; +#6677 = CARTESIAN_POINT ( 'NONE', ( 36.85491641464241800, -31.13022770474979200, 24.60675959305187300 ) ) ; +#6678 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -96.37138356748538100, 5.695220015074590400 ) ) ; +#6679 = VERTEX_POINT ( 'NONE', #7063 ) ; +#6680 = CARTESIAN_POINT ( 'NONE', ( 13.25135170032522900, -30.87198444495082600, 27.77050091349487100 ) ) ; +#6681 = AXIS2_PLACEMENT_3D ( 'NONE', #1999, #11162, #11431 ) ; +#6682 = CARTESIAN_POINT ( 'NONE', ( 9.204347896639669500, -30.63045660423344100, 25.94370432817346000 ) ) ; +#6683 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999920100, -29.99786813094172200, 21.55836633260288300 ) ) ; +#6684 = CARTESIAN_POINT ( 'NONE', ( 5.156403149004169100, -11.17644426041824200, -23.86628250181710700 ) ) ; +#6685 = CARTESIAN_POINT ( 'NONE', ( 11.29224541610282600, -13.00892613609436300, -25.13600424047794800 ) ) ; +#6686 = CARTESIAN_POINT ( 'NONE', ( 38.12660035558798200, -30.13678885570413300, 24.28990752766170000 ) ) ; +#6687 = CARTESIAN_POINT ( 'NONE', ( 2.640359964563792500E-012, -7.160203217288274600, -19.28394293994725600 ) ) ; +#6688 = VECTOR ( 'NONE', #4850, 1000.000000000000000 ) ; +#6689 = CARTESIAN_POINT ( 'NONE', ( 35.00534259234032000, -30.94082108600566300, 26.27938549573068300 ) ) ; +#6690 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6691 = ORIENTED_EDGE ( 'NONE', *, *, #11947, .T. ) ; +#6692 = CARTESIAN_POINT ( 'NONE', ( 12.22836062668680100, -10.38802442829207000, -25.05560484111140300 ) ) ; +#6693 = CARTESIAN_POINT ( 'NONE', ( 37.15677506050558100, -31.10128569549871700, 24.30085814906910000 ) ) ; +#6694 = CARTESIAN_POINT ( 'NONE', ( 4.999999999998395100, -94.90629810833831900, 6.281968897871747600 ) ) ; +#6695 = CARTESIAN_POINT ( 'NONE', ( 7.190138454801302500, -23.18843785652455500, -20.03404616410636100 ) ) ; +#6696 = CARTESIAN_POINT ( 'NONE', ( 7.202081083111393100, -30.28089488152227900, 24.58904019160696600 ) ) ; +#6697 = CARTESIAN_POINT ( 'NONE', ( 8.533952684833806800, -28.48512868754053800, 23.83350120349145100 ) ) ; +#6698 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999998600, -8.010187898437768800, -15.13681436190146100 ) ) ; +#6699 = CARTESIAN_POINT ( 'NONE', ( 39.95956431532730600, -95.07596123494829500, -3.476174004076665100 ) ) ; +#6700 = AXIS2_PLACEMENT_3D ( 'NONE', #3412, #3404, #3386 ) ; +#6701 = CARTESIAN_POINT ( 'NONE', ( 39.80677394742050300, -30.01527250797781600, 22.00415227339252400 ) ) ; +#6702 = VECTOR ( 'NONE', #6395, 1000.000000000000000 ) ; +#6703 = CARTESIAN_POINT ( 'NONE', ( 5.661736612878660100, -10.28889580669700400, 21.98457917862792100 ) ) ; +#6704 = CARTESIAN_POINT ( 'NONE', ( 3.948725057461664800, -17.90633997052868800, -12.14699628158867000 ) ) ; +#6705 = ADVANCED_FACE ( 'NONE', ( #11181 ), #8178, .T. ) ; +#6706 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999998200, -21.33765992696555400, -10.54370632810525700 ) ) ; +#6707 = CARTESIAN_POINT ( 'NONE', ( 1.647987302177966700E-014, -5.249201556085504100, 15.78528914089217700 ) ) ; +#6708 = CARTESIAN_POINT ( 'NONE', ( 19.95431510909718000, -28.77949532668908000, 29.18866828981625300 ) ) ; +#6709 = CARTESIAN_POINT ( 'NONE', ( 37.23445164825590600, -31.09212557077687200, 24.21838614779745700 ) ) ; +#6710 = CARTESIAN_POINT ( 'NONE', ( 33.59424268543300200, -17.07142213206428800, -25.06701809440275100 ) ) ; +#6711 = CARTESIAN_POINT ( 'NONE', ( 5.633739850509474700, -29.67830239799755900, 22.72557465769188000 ) ) ; +#6712 = CARTESIAN_POINT ( 'NONE', ( 44.47225230710375100, -11.05563473103661700, 7.974211554088497200 ) ) ; +#6713 = CARTESIAN_POINT ( 'NONE', ( 10.27210974545642800, -97.40634803306923600, 20.31095579530004600 ) ) ; +#6714 = CARTESIAN_POINT ( 'NONE', ( 10.96938815428340100, -30.17182225336863500, 26.90164483076735300 ) ) ; +#6715 = CIRCLE ( 'NONE', #1513, 3.189999999999995100 ) ; +#6716 = EDGE_CURVE ( 'NONE', #2214, #6820, #5757, .T. ) ; +#6717 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, -94.54406934440207500, 19.57758955819930000 ) ) ; +#6718 = ORIENTED_EDGE ( 'NONE', *, *, #1351, .F. ) ; +#6719 = CARTESIAN_POINT ( 'NONE', ( 32.86139112221095400, -30.47430937056507400, 27.42192930198883300 ) ) ; +#6720 = CARTESIAN_POINT ( 'NONE', ( 15.92406739207334500, -12.50000000000001100, 21.39216532878089100 ) ) ; +#6721 = CARTESIAN_POINT ( 'NONE', ( 7.911185714882970300, -7.965204017137812000, 25.59438319123720300 ) ) ; +#6722 = FACE_OUTER_BOUND ( 'NONE', #8425, .T. ) ; +#6723 = CARTESIAN_POINT ( 'NONE', ( 37.45502635530017000, -31.06334295773908800, 23.97805564589754800 ) ) ; +#6724 = CARTESIAN_POINT ( 'NONE', ( 6.423840633302869000, -94.27290945639624900, 6.529463264190035000 ) ) ; +#6725 = CARTESIAN_POINT ( 'NONE', ( 13.25254218458405100, -30.79350931169259900, 27.78634501725069200 ) ) ; +#6726 = CARTESIAN_POINT ( 'NONE', ( 9.298409911702478300, -29.85073774863585100, 25.93835049347990900 ) ) ; +#6727 = CARTESIAN_POINT ( 'NONE', ( 10.34897260230127000, -19.89187006733435200, -24.04417219695633200 ) ) ; +#6728 = CARTESIAN_POINT ( 'NONE', ( 37.02928770773228700, -11.19704245478439500, 23.87412149722925400 ) ) ; +#6729 = CARTESIAN_POINT ( 'NONE', ( 5.315568900602204200, -9.539185563202773100, -24.48624281838357700 ) ) ; +#6730 = CARTESIAN_POINT ( 'NONE', ( 2.210089484193664700, -10.15625072973067400, -20.65163396453985100 ) ) ; +#6731 = CARTESIAN_POINT ( 'NONE', ( 37.66874598534611400, -31.02544368383891900, 23.73097261656618100 ) ) ; +#6732 = CARTESIAN_POINT ( 'NONE', ( 24.93866206969478600, -30.66176281334873400, 28.85677374700786400 ) ) ; +#6733 = CARTESIAN_POINT ( 'NONE', ( 34.61054417107825300, -30.11330904010588600, 26.61289447027924400 ) ) ; +#6734 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9464545609416071800, -0.3228370549872325900 ) ) ; +#6735 = CARTESIAN_POINT ( 'NONE', ( 10.78262328575185900, -10.58224105190305800, -25.00000000000000000 ) ) ; +#6736 = CARTESIAN_POINT ( 'NONE', ( 37.58523811281501300, -31.04248944340605100, 23.82751646083874400 ) ) ; +#6737 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -96.63408478952935400, 6.393891568608929700 ) ) ; +#6738 = CARTESIAN_POINT ( 'NONE', ( 17.48978656939940600, -23.89407525180319100, -27.24367770988917000 ) ) ; +#6739 = CARTESIAN_POINT ( 'NONE', ( 7.610160292436987100, -29.26937298305489000, 24.37251148590081600 ) ) ; +#6740 = CARTESIAN_POINT ( 'NONE', ( 42.98892762163344400, -9.005253780158058800, -23.16384301008346800 ) ) ; +#6741 = CARTESIAN_POINT ( 'NONE', ( 38.52692829303675400, -89.69640923368770300, 2.374388476377729900 ) ) ; +#6742 = EDGE_CURVE ( 'NONE', #8500, #12468, #5826, .T. ) ; +#6743 = CARTESIAN_POINT ( 'NONE', ( 38.78113540643449400, -28.93432280255220900, 22.32485507038918000 ) ) ; +#6744 = FACE_BOUND ( 'NONE', #1688, .T. ) ; +#6745 = CARTESIAN_POINT ( 'NONE', ( 6.744855132585221300, -7.957322465310624300, 24.70837479998202800 ) ) ; +#6746 = CARTESIAN_POINT ( 'NONE', ( 5.005128197323776900, -22.41938932217483000, -12.44958272658711900 ) ) ; +#6747 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, 51.02052347080197600, 33.25956466485613600 ) ) ; +#6748 = CARTESIAN_POINT ( 'NONE', ( 29.79298309037203700, -99.99999999999998600, 21.21300320110922400 ) ) ; +#6749 = CARTESIAN_POINT ( 'NONE', ( 0.8317219273077026700, -9.050938227096658300, 15.40651420223845000 ) ) ; +#6750 = CARTESIAN_POINT ( 'NONE', ( 37.70395782908396900, -31.02076078010241000, 23.68368681044057700 ) ) ; +#6751 = CARTESIAN_POINT ( 'NONE', ( 20.04781185526486500, -25.57119966876104700, 22.25479438982880300 ) ) ; +#6752 = CARTESIAN_POINT ( 'NONE', ( 6.675142102940756500, -30.87282919084458800, 22.84907283364635300 ) ) ; +#6753 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000021300, -10.00001259924992200, 7.969484979882953000 ) ) ; +#6754 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, -17.49999999999999600 ) ) ; +#6755 = CARTESIAN_POINT ( 'NONE', ( 11.13333934051137700, -30.72735286835844400, 26.96813041041289700 ) ) ; +#6756 = AXIS2_PLACEMENT_3D ( 'NONE', #3700, #4723, #5677 ) ; +#6757 = LINE ( 'NONE', #5232, #1359 ) ; +#6758 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#6759 = EDGE_CURVE ( 'NONE', #6144, #4543, #8819, .T. ) ; +#6760 = CARTESIAN_POINT ( 'NONE', ( 38.47439584071252500, -9.084653275635464100, -24.91233072618107200 ) ) ; +#6761 = CARTESIAN_POINT ( 'NONE', ( 32.86972075578194800, -30.74175008505298100, 27.39684430181287300 ) ) ; +#6762 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -1.972066022637282400, 11.18414218126905600 ) ) ; +#6763 = CARTESIAN_POINT ( 'NONE', ( 4.615685669194690800, -7.939572092855748100, 22.71295825167916500 ) ) ; +#6764 = CARTESIAN_POINT ( 'NONE', ( 5.000000000001633400, -95.04538050746239700, 6.962711608204063700 ) ) ; +#6765 = CARTESIAN_POINT ( 'NONE', ( 13.25129825710910900, -30.72471432112421000, 27.79635792442050900 ) ) ; +#6766 = ORIENTED_EDGE ( 'NONE', *, *, #9894, .T. ) ; +#6767 = CARTESIAN_POINT ( 'NONE', ( 9.440344902906264900, -30.93300704872253700, 25.92984324512116200 ) ) ; +#6768 = EDGE_LOOP ( 'NONE', ( #11576, #5961, #12013, #12309 ) ) ; +#6769 = CARTESIAN_POINT ( 'NONE', ( 5.728789315949359900, -8.291074916802712000, -24.96966806920827500 ) ) ; +#6770 = ADVANCED_FACE ( 'NONE', ( #10851 ), #3462, .T. ) ; +#6771 = VECTOR ( 'NONE', #11840, 1000.000000000000000 ) ; +#6772 = CARTESIAN_POINT ( 'NONE', ( 38.03752547308556600, -29.84214366129171100, 24.30204023387537800 ) ) ; +#6773 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6774 = AXIS2_PLACEMENT_3D ( 'NONE', #3622, #641, #8740 ) ; +#6775 = CARTESIAN_POINT ( 'NONE', ( 34.65095723430295000, -30.70578594013604600, 26.58471710086379100 ) ) ; +#6776 = CARTESIAN_POINT ( 'NONE', ( 32.43790168126099600, -30.57357293189297200, 27.57534056131561700 ) ) ; +#6777 = ORIENTED_EDGE ( 'NONE', *, *, #7006, .T. ) ; +#6778 = CARTESIAN_POINT ( 'NONE', ( 37.71014510438472200, -31.01962286802473700, 23.67617786074572800 ) ) ; +#6779 = CARTESIAN_POINT ( 'NONE', ( 6.564278364782134100, -94.44804360490620400, 7.170630477973525700 ) ) ; +#6780 = CARTESIAN_POINT ( 'NONE', ( 7.589419084297589700, -30.58713740817897500, 24.75638953954252500 ) ) ; +#6781 = ORIENTED_EDGE ( 'NONE', *, *, #547, .F. ) ; +#6782 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -95.07596123493894400, 0.8682408883346195400 ) ) ; +#6783 = CARTESIAN_POINT ( 'NONE', ( 37.26243725607087500, -95.07596123493894400, 11.74817948057317600 ) ) ; +#6784 = CARTESIAN_POINT ( 'NONE', ( 39.79476797415671300, -29.68679572276739300, 22.17508435030439500 ) ) ; +#6785 = ORIENTED_EDGE ( 'NONE', *, *, #6010, .F. ) ; +#6786 = CARTESIAN_POINT ( 'NONE', ( 3.963807221122152700, -9.916582126696750900, 23.83467294925956300 ) ) ; +#6787 = CARTESIAN_POINT ( 'NONE', ( 5.018002529208152900, -20.04002940695383800, -12.43628746683981000 ) ) ; +#6788 = ORIENTED_EDGE ( 'NONE', *, *, #3575, .F. ) ; +#6789 = CARTESIAN_POINT ( 'NONE', ( 36.37162369979307600, -30.85481078918822500, 25.38877600170314600 ) ) ; +#6790 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.734723475976807600E-016, -1.000000000000000000 ) ) ; +#6791 = CARTESIAN_POINT ( 'NONE', ( 41.05018658645033000, -17.89962682709925800, -11.53187062879840300 ) ) ; +#6792 = EDGE_CURVE ( 'NONE', #3431, #10590, #10549, .T. ) ; +#6793 = ORIENTED_EDGE ( 'NONE', *, *, #11441, .F. ) ; +#6794 = CARTESIAN_POINT ( 'NONE', ( 44.39229395289842000, -7.956725243431074900, 16.32830810186579700 ) ) ; +#6795 = CARTESIAN_POINT ( 'NONE', ( 37.71987842557074100, -31.01781958400772200, 23.66433399742255300 ) ) ; +#6796 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3617, #9736, #11760, #5671, #12722, #6710 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001833777539774757000, 0.003667555079549518700 ), + .UNSPECIFIED. ) ; +#6797 = CARTESIAN_POINT ( 'NONE', ( 8.346908230361915300, -95.07596123493894400, 13.53716216740684100 ) ) ; +#6798 = CARTESIAN_POINT ( 'NONE', ( 5.957217393188748200, -30.09307285645876800, 23.14251703871386200 ) ) ; +#6799 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000700, -8.819821882418134300, 7.964200579891816300 ) ) ; +#6800 = CARTESIAN_POINT ( 'NONE', ( 33.04987185581649100, -23.68154715611019500, -25.04292370012610600 ) ) ; +#6801 = CARTESIAN_POINT ( 'NONE', ( 11.15714979545394000, -30.25447450251438800, 26.99897543252504300 ) ) ; +#6802 = VERTEX_POINT ( 'NONE', #10337 ) ; +#6803 = CARTESIAN_POINT ( 'NONE', ( 2.772457007348200000, -9.681709362286536400, -22.16735315830921500 ) ) ; +#6804 = ORIENTED_EDGE ( 'NONE', *, *, #10884, .T. ) ; +#6805 = VERTEX_POINT ( 'NONE', #2188 ) ; +#6806 = CARTESIAN_POINT ( 'NONE', ( 39.47378906464125900, -9.334510643325581100, -24.61444609663877600 ) ) ; +#6807 = CARTESIAN_POINT ( 'NONE', ( 32.86136744977929400, -30.98147824893734600, 27.33244108094522300 ) ) ; +#6808 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6809 = CARTESIAN_POINT ( 'NONE', ( 3.652953869347549200, -7.929704164938457600, 21.60365044908229100 ) ) ; +#6810 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -96.75656818788910100, 6.749276979339046400 ) ) ; +#6811 = CARTESIAN_POINT ( 'NONE', ( 13.35517000173867800, -30.81499859048894100, 27.81532162226360000 ) ) ; +#6812 = CARTESIAN_POINT ( 'NONE', ( 9.407344084572820000, -30.21443274193045200, 26.10803476941385500 ) ) ; +#6813 = CARTESIAN_POINT ( 'NONE', ( 44.62715162251955500, -6.961783436923951700, 17.49265826777792700 ) ) ; +#6814 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999998900, -94.74682992296695300, 18.71443453778783800 ) ) ; +#6815 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000001400, -100.0000000000000100, -5.267905492818150600 ) ) ; +#6816 = ORIENTED_EDGE ( 'NONE', *, *, #5274, .T. ) ; +#6817 = EDGE_CURVE ( 'NONE', #10062, #5178, #1135, .T. ) ; +#6818 = ORIENTED_EDGE ( 'NONE', *, *, #10326, .F. ) ; +#6819 = CARTESIAN_POINT ( 'NONE', ( 37.80171112631487800, -30.86729686131548100, 23.91272500197240100 ) ) ; +#6820 = VERTEX_POINT ( 'NONE', #7333 ) ; +#6821 = CARTESIAN_POINT ( 'NONE', ( 25.59222361292772500, -22.72556307100145300, -27.24386011412474000 ) ) ; +#6822 = EDGE_CURVE ( 'NONE', #6970, #10144, #7859, .T. ) ; +#6823 = CARTESIAN_POINT ( 'NONE', ( 34.40844965109518900, -30.07004429449477500, 26.70354842812793400 ) ) ; +#6824 = CARTESIAN_POINT ( 'NONE', ( 34.87335261138848400, -29.94097462324429400, 26.43320794364694500 ) ) ; +#6825 = CARTESIAN_POINT ( 'NONE', ( 37.73442693179594400, -31.01510777345344000, 23.64659182125741000 ) ) ; +#6826 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #10849, #5996, #10145 ), + ( #4015, #11168, #5054 ), + ( #12151, #6083, #32 ), + ( #7139, #1039, #8166 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.004625614886216253300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7941643989882847300, 1.000000000000000000), + ( 1.000000000000000000, 0.7941643989882847300, 1.000000000000000000), + ( 1.000000000000000000, 0.7941643989882851700, 1.000000000000000000), + ( 1.000000000000000000, 0.7941643989882851700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#6827 = ORIENTED_EDGE ( 'NONE', *, *, #1977, .T. ) ; +#6828 = CARTESIAN_POINT ( 'NONE', ( 7.769881047642670100, -29.54594917301291800, 24.74956453348520200 ) ) ; +#6829 = CARTESIAN_POINT ( 'NONE', ( 24.81280744310813100, -31.29913968154957600, 28.74438700826459600 ) ) ; +#6830 = CARTESIAN_POINT ( 'NONE', ( 6.218694083888715700, -30.68478251826508100, 22.01585920960329500 ) ) ; +#6831 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #10221, 'distance_accuracy_value', 'NONE'); +#6832 = CARTESIAN_POINT ( 'NONE', ( 28.64648689828451500, -95.07596123494806800, 9.573790652946042800 ) ) ; +#6833 = DIRECTION ( 'NONE', ( 0.5543576214275137700, -0.7892513277227377600, 0.2641400561314487500 ) ) ; +#6834 = VERTEX_POINT ( 'NONE', #8406 ) ; +#6835 = LINE ( 'NONE', #7464, #3318 ) ; +#6836 = CARTESIAN_POINT ( 'NONE', ( 38.81147099406945200, -30.67210293348964400, 22.01722447703908300 ) ) ; +#6837 = CARTESIAN_POINT ( 'NONE', ( 1.971780523308756000, -7.908398812644528600, 19.20859915400787400 ) ) ; +#6838 = CARTESIAN_POINT ( 'NONE', ( 3.958215595128102400, -17.90966220546397400, -12.45805307719291300 ) ) ; +#6839 = CARTESIAN_POINT ( 'NONE', ( 36.18957715703008700, -29.64465529318937700, 25.53709503395944200 ) ) ; +#6840 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457639500, -30.82655086342984400, 27.93782961424069500 ) ) ; +#6841 = CARTESIAN_POINT ( 'NONE', ( 25.42947892615364200, -18.05086771501036600, -28.19839925185582900 ) ) ; +#6842 = VERTEX_POINT ( 'NONE', #6278 ) ; +#6843 = EDGE_CURVE ( 'NONE', #3431, #2800, #11933, .T. ) ; +#6844 = CARTESIAN_POINT ( 'NONE', ( 44.92341964571425500, -5.880883275035506200, 16.72122461049892600 ) ) ; +#6845 = CARTESIAN_POINT ( 'NONE', ( 11.99221789413745800, -95.07596123493895800, 16.42628942631730000 ) ) ; +#6846 = LINE ( 'NONE', #3551, #12209 ) ; +#6847 = CARTESIAN_POINT ( 'NONE', ( 6.650578109922294700, -29.05951880209084600, 23.17464411741977800 ) ) ; +#6848 = CARTESIAN_POINT ( 'NONE', ( 44.47230137530099400, -11.05559114673564000, 7.962023799849312400 ) ) ; +#6849 = ORIENTED_EDGE ( 'NONE', *, *, #9561, .F. ) ; +#6850 = CARTESIAN_POINT ( 'NONE', ( 39.90497675773932000, -22.57442862013188300, -13.95606786766611800 ) ) ; +#6851 = CARTESIAN_POINT ( 'NONE', ( 11.24001621720560500, -30.89344505481193100, 26.96714168400364600 ) ) ; +#6852 = CARTESIAN_POINT ( 'NONE', ( 12.19024682901858700, -19.25869869653539700, 21.14076252170827200 ) ) ; +#6853 = DIRECTION ( 'NONE', ( -0.9704428632610511100, -0.02183802303550289400, -0.2403409035008271200 ) ) ; +#6854 = CARTESIAN_POINT ( 'NONE', ( 41.12555237492533400, -9.167577733346680800, -24.51137885174333400 ) ) ; +#6855 = CARTESIAN_POINT ( 'NONE', ( 32.66674295980948300, -30.70071958269409900, 27.48121480669100300 ) ) ; +#6856 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122091300, -0.1736481776669239500 ) ) ; +#6857 = CARTESIAN_POINT ( 'NONE', ( 1.253423527362776700, -7.896962459763144300, 17.92297611438122100 ) ) ; +#6858 = CARTESIAN_POINT ( 'NONE', ( 4.999999999998079800, -95.10391797849828800, 7.304666556797569000 ) ) ; +#6859 = CARTESIAN_POINT ( 'NONE', ( 13.35409977207198100, -30.74983432366035900, 27.82561304840901800 ) ) ; +#6860 = CYLINDRICAL_SURFACE ( 'NONE', #11591, 3.189999999999995100 ) ; +#6861 = CARTESIAN_POINT ( 'NONE', ( 9.591078693685240400, -31.14669259545482700, 25.85828586883139100 ) ) ; +#6862 = CARTESIAN_POINT ( 'NONE', ( 8.886776242956443600, -94.72606175908733000, 15.98072096801388800 ) ) ; +#6863 = CARTESIAN_POINT ( 'NONE', ( 8.690187399600528600, -21.16851096713120100, 17.84516541697630000 ) ) ; +#6864 = CARTESIAN_POINT ( 'NONE', ( 34.44337236086746400, -100.0000000000000100, 2.250973072611177200 ) ) ; +#6865 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.819660112500978100, -11.53187062879840900 ) ) ; +#6866 = CARTESIAN_POINT ( 'NONE', ( 37.65620672024078200, -29.44782059001320500, 24.33045960816972200 ) ) ; +#6867 = CARTESIAN_POINT ( 'NONE', ( 29.86116014918162900, -20.27656652671231900, -26.81203594770654400 ) ) ; +#6868 = CARTESIAN_POINT ( 'NONE', ( 34.45789990866011000, -30.58743666574674000, 26.71008367514422600 ) ) ; +#6869 = CARTESIAN_POINT ( 'NONE', ( 37.09686736352514900, -29.33966664333291900, 24.67734987181931700 ) ) ; +#6870 = CIRCLE ( 'NONE', #1015, 1.200000000000010200 ) ; +#6871 = CARTESIAN_POINT ( 'NONE', ( 37.76801407655376200, -31.00873292947259700, 23.60535996038195700 ) ) ; +#6872 = CARTESIAN_POINT ( 'NONE', ( 6.635101042871608200, -94.52969920337895400, 7.491482714605605300 ) ) ; +#6873 = ORIENTED_EDGE ( 'NONE', *, *, #2134, .T. ) ; +#6874 = CARTESIAN_POINT ( 'NONE', ( 7.931612122785289800, -30.95594028410559400, 24.65264613922421000 ) ) ; +#6875 = CARTESIAN_POINT ( 'NONE', ( 18.17776643546665500, -23.32080000503495800, -27.27863564497295100 ) ) ; +#6876 = CARTESIAN_POINT ( 'NONE', ( 7.886749698555468600, -31.10686360316098100, 24.34857567049807500 ) ) ; +#6877 = CARTESIAN_POINT ( 'NONE', ( 44.95755642649428600, 10.08479207181837400, -24.95755642649418200 ) ) ; +#6878 = AXIS2_PLACEMENT_3D ( 'NONE', #2468, #3490, #518 ) ; +#6879 = CARTESIAN_POINT ( 'NONE', ( 39.31333572233982200, -29.37378291363085800, 22.54742330242877600 ) ) ; +#6880 = CARTESIAN_POINT ( 'NONE', ( 25.05794980690656700, -33.35025653084942100, 26.50741664928542100 ) ) ; +#6881 = CARTESIAN_POINT ( 'NONE', ( 5.034043956045131600, -22.47950281449624300, -13.03418568362046800 ) ) ; +#6882 = CARTESIAN_POINT ( 'NONE', ( 36.34366194832865200, -30.55393259173819900, 25.59006393094638600 ) ) ; +#6883 = CARTESIAN_POINT ( 'NONE', ( 5.977971889717340800, -10.60655863943058500, 23.31529830647051700 ) ) ; +#6884 = CARTESIAN_POINT ( 'NONE', ( 27.96706148247212900, -23.88504135757243700, -27.15016394393860500 ) ) ; +#6885 = CARTESIAN_POINT ( 'NONE', ( 17.56542282008399500, -94.71789415300041500, 18.69245526011119600 ) ) ; +#6886 = CARTESIAN_POINT ( 'NONE', ( 6.312385589960720200, -30.47221989263280800, 23.27954501241863400 ) ) ; +#6887 = FACE_OUTER_BOUND ( 'NONE', #4372, .T. ) ; +#6888 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999941700, -10.00000924064544900, 7.957297889976654700 ) ) ; +#6889 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000000, -14.31000000000000400 ) ) ; +#6890 = CARTESIAN_POINT ( 'NONE', ( 11.24001603722559200, -30.43171776856069900, 27.04856078204186800 ) ) ; +#6891 = CARTESIAN_POINT ( 'NONE', ( 9.482703136362888000, -19.38093599858892400, 18.97468659868151900 ) ) ; +#6892 = CARTESIAN_POINT ( 'NONE', ( 30.75260965406329600, -20.16400446421412700, 22.05121247660105200 ) ) ; +#6894 = EDGE_CURVE ( 'NONE', #11256, #8267, #2411, .T. ) ; +#6893 = CARTESIAN_POINT ( 'NONE', ( 40.48624126227697700, -11.37605543085657400, -23.20891548605306900 ) ) ; +#6895 = CARTESIAN_POINT ( 'NONE', ( 32.66323621589668100, -30.92643064516888500, 27.43040229258173900 ) ) ; +#6896 = CARTESIAN_POINT ( 'NONE', ( 0.09145155058675195900, -7.873004505116571600, 15.22973126616038200 ) ) ; +#6897 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -97.08917251752038200, 7.821153000266632700 ) ) ; +#6898 = CARTESIAN_POINT ( 'NONE', ( 13.56021006904303900, -30.83280396772939700, 27.87575492065999000 ) ) ; +#6899 = CARTESIAN_POINT ( 'NONE', ( 9.477978654757732700, -30.45377225342119200, 26.15913589703787100 ) ) ; +#6900 = VECTOR ( 'NONE', #5535, 1000.000000000000000 ) ; +#6901 = CARTESIAN_POINT ( 'NONE', ( 10.74307466181912800, -13.39205116878632600, -25.00000000000000700 ) ) ; +#6902 = CARTESIAN_POINT ( 'NONE', ( 39.05287818322620600, -93.11137696449338800, 18.95373406131192300 ) ) ; +#6903 = CARTESIAN_POINT ( 'NONE', ( 5.066582175178273100, -29.93152987289957800, 21.57006261513522800 ) ) ; +#6904 = CARTESIAN_POINT ( 'NONE', ( 37.88031648129224000, -30.53108040232465100, 24.34785971522681400 ) ) ; +#6905 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 1, ( + ( #4453, #4464 ), + ( #4424, #4415 ), + ( #4395, #4378 ), + ( #4350, #4336 ), + ( #2242, #2227 ), + ( #2196, #4294 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 4, 2, 4 ), + ( 2, 2 ), + ( 0.8219414260610994300, 0.8750000000000003300, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#6906 = CARTESIAN_POINT ( 'NONE', ( 35.53207232686691000, -20.05595663050579300, -23.22829418702598400 ) ) ; +#6907 = CARTESIAN_POINT ( 'NONE', ( 34.40858384629070300, -31.11453131428262300, 26.51964869446065600 ) ) ; +#6908 = CARTESIAN_POINT ( 'NONE', ( 37.99768825038509600, -29.11858270131198600, 23.63926296104072100 ) ) ; +#6909 = VECTOR ( 'NONE', #12347, 1000.000000000000000 ) ; +#6910 = CARTESIAN_POINT ( 'NONE', ( 37.83375853137900400, -30.99580137500234800, 23.52357209099809100 ) ) ; +#6911 = CARTESIAN_POINT ( 'NONE', ( 5.000000000003984400, -95.24421259199476700, 8.331288511292488200 ) ) ; +#6912 = CARTESIAN_POINT ( 'NONE', ( 7.768685968562756700, -29.99320510189628000, 25.00229660271152500 ) ) ; +#6913 = CARTESIAN_POINT ( 'NONE', ( 15.14027257470579900, -20.27763072375478600, -26.81222359435532400 ) ) ; +#6914 = CARTESIAN_POINT ( 'NONE', ( 10.04045916492117900, -31.14859683563681300, 26.16292287402064100 ) ) ; +#6915 = CARTESIAN_POINT ( 'NONE', ( 10.52301163257778400, -16.62568066263588300, -24.81012168277263900 ) ) ; +#6916 = CARTESIAN_POINT ( 'NONE', ( 44.66957895124922800, 10.75287675468472600, -22.93391579024984500 ) ) ; +#6917 = EDGE_CURVE ( 'NONE', #6649, #9162, #2730, .T. ) ; +#6918 = CARTESIAN_POINT ( 'NONE', ( 39.04133781644086600, -30.54415894493599400, 22.33776152440310300 ) ) ; +#6919 = ORIENTED_EDGE ( 'NONE', *, *, #2901, .T. ) ; +#6920 = ORIENTED_EDGE ( 'NONE', *, *, #5386, .T. ) ; +#6921 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, -14.31000000000000400 ) ) ; +#6922 = CARTESIAN_POINT ( 'NONE', ( 16.74166765707605400, -12.49999999999999600, 21.62623591393572700 ) ) ; +#6923 = LINE ( 'NONE', #1647, #9319 ) ; +#6924 = CARTESIAN_POINT ( 'NONE', ( 36.00192162559960700, -29.62896495759432400, 25.64833651667410700 ) ) ; +#6925 = CARTESIAN_POINT ( 'NONE', ( 8.956628484436176800, -10.74974783305365700, 25.00000000000000400 ) ) ; +#6926 = CARTESIAN_POINT ( 'NONE', ( 30.76893176325245000, -20.79970270481232600, -25.74564158600028600 ) ) ; +#6927 = CARTESIAN_POINT ( 'NONE', ( 37.88768590094965600, -30.98443048652751500, 23.45465957245710700 ) ) ; +#6928 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 9.500000000000000000, -24.99999999999999300 ) ) ; +#6929 = CARTESIAN_POINT ( 'NONE', ( 6.493885630594472300, -29.34301565232529200, 23.41407497993379400 ) ) ; +#6930 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000700, -8.819876444398978800, 7.952014290711753500 ) ) ; +#6931 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -99.99999999999998600, 21.63057173623876000 ) ) ; +#6932 = CARTESIAN_POINT ( 'NONE', ( 11.44816167021732800, -31.02065951199485400, 27.01165605928955300 ) ) ; +#6933 = ORIENTED_EDGE ( 'NONE', *, *, #8381, .T. ) ; +#6934 = AXIS2_PLACEMENT_3D ( 'NONE', #1641, #2644, #9779 ) ; +#6935 = ADVANCED_FACE ( 'NONE', ( #7553 ), #9605, .F. ) ; +#6936 = CARTESIAN_POINT ( 'NONE', ( 7.535959900956083100, -19.51693987973534300, 16.56478329641614200 ) ) ; +#6937 = CARTESIAN_POINT ( 'NONE', ( 36.30995556381474600, -21.16856967486051400, 17.84498898857302500 ) ) ; +#6938 = CARTESIAN_POINT ( 'NONE', ( 41.59425478983886400, -10.00293073726414900, -22.86614729118475300 ) ) ; +#6939 = CARTESIAN_POINT ( 'NONE', ( 32.25950390556371200, -30.67089349656634700, 27.63260754779902900 ) ) ; +#6940 = ORIENTED_EDGE ( 'NONE', *, *, #12910, .T. ) ; +#6941 = CARTESIAN_POINT ( 'NONE', ( 5.221465163488281800, -12.13272824146035400, 19.94861030374859100 ) ) ; +#6942 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#6943 = CARTESIAN_POINT ( 'NONE', ( 13.56020946197202400, -30.79944391024822900, 27.88163699483952100 ) ) ; +#6944 = CARTESIAN_POINT ( 'NONE', ( 11.40575731456750900, -17.07142213206140700, -25.06701809440317400 ) ) ; +#6945 = CARTESIAN_POINT ( 'NONE', ( 9.596714087476842200, -29.79374273084921400, 26.08795638709856100 ) ) ; +#6946 = CARTESIAN_POINT ( 'NONE', ( 11.35228933868425600, -13.41914980536903100, -25.15601430610437500 ) ) ; +#6947 = ORIENTED_EDGE ( 'NONE', *, *, #12417, .F. ) ; +#6948 = CARTESIAN_POINT ( 'NONE', ( 24.94828648806702600, -27.98912918939084800, 27.51078951765027400 ) ) ; +#6949 = ORIENTED_EDGE ( 'NONE', *, *, #8537, .F. ) ; +#6950 = CARTESIAN_POINT ( 'NONE', ( 5.966458260355953100, -28.90349687449120400, 21.75133282177879600 ) ) ; +#6951 = CARTESIAN_POINT ( 'NONE', ( 37.38955742977707800, -29.26931258976619800, 24.37266307737858300 ) ) ; +#6952 = ORIENTED_EDGE ( 'NONE', *, *, #10113, .T. ) ; +#6953 = CARTESIAN_POINT ( 'NONE', ( 30.62950171324102300, -12.64891493249317900, -25.46707517220006900 ) ) ; +#6954 = AXIS2_PLACEMENT_3D ( 'NONE', #768, #6853, #12846 ) ; +#6955 = CARTESIAN_POINT ( 'NONE', ( 34.15836039192711800, -30.47704682774232400, 26.86453758615754600 ) ) ; +#6956 = CARTESIAN_POINT ( 'NONE', ( 38.66983292534403200, -28.96227368993023500, 22.56464019474113400 ) ) ; +#6957 = ORIENTED_EDGE ( 'NONE', *, *, #7968, .F. ) ; +#6958 = CARTESIAN_POINT ( 'NONE', ( 37.99237571943375300, -30.96137453175580100, 23.31850658420163600 ) ) ; +#6959 = CARTESIAN_POINT ( 'NONE', ( 43.02821947669123400, -7.908398812644530400, 19.20859915400789600 ) ) ; +#6960 = EDGE_LOOP ( 'NONE', ( #3449, #3760, #4367, #4541, #4724, #5187, #6320, #6827, #7291, #7625, #7760, #8083, #9227, #9534 ) ) ; +#6961 = CARTESIAN_POINT ( 'NONE', ( 8.347163106686776900, -31.14394119748217400, 24.80686201922105000 ) ) ; +#6962 = CARTESIAN_POINT ( 'NONE', ( 16.27824323978996200, -16.13456968130987300, -26.08169014985101300 ) ) ; +#6963 = CARTESIAN_POINT ( 'NONE', ( 12.74083688717374800, -30.92263237288294100, 27.58356118625910700 ) ) ; +#6964 = CARTESIAN_POINT ( 'NONE', ( 11.77415219597256900, -18.61805867233735900, -24.85544820761659300 ) ) ; +#6965 = CARTESIAN_POINT ( 'NONE', ( 42.75057534780062000, 11.66957896172722400, -23.75287673900330900 ) ) ; +#6966 = CARTESIAN_POINT ( 'NONE', ( 38.71136800678651500, -29.08258960641795100, 22.79892802886971700 ) ) ; +#6967 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8288, #1159, #9293, #3175, #10303, #4180, #11327, #5210 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001629726976504976200, 0.003259453953009952500, 0.006518907906019922300 ), + .UNSPECIFIED. ) ; +#6968 = CARTESIAN_POINT ( 'NONE', ( 17.75159637107638800, -23.18094445593662200, -27.18488951258742500 ) ) ; +#6969 = CARTESIAN_POINT ( 'NONE', ( 5.062248453950439300, -20.07274621698039100, -13.01891653176701200 ) ) ; +#6970 = VERTEX_POINT ( 'NONE', #5385 ) ; +#6971 = CARTESIAN_POINT ( 'NONE', ( 36.16663666242617800, -30.37276247806603300, 25.75390630327382300 ) ) ; +#6972 = EDGE_CURVE ( 'NONE', #2930, #11868, #12555, .T. ) ; +#6973 = CARTESIAN_POINT ( 'NONE', ( 11.36815562195870300, -10.96285141908100700, 25.00000000000000000 ) ) ; +#6974 = CARTESIAN_POINT ( 'NONE', ( 35.81877905645628600, -18.01952623498743100, -23.92411781997106200 ) ) ; +#6975 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 1, 3, ( + ( #2536, #12784, #6454, #6446, #6262, #6310, #6151, #6104, #5999, #5953, #5909, #6959, #5895, #5344, #5294, #5012, #4966, #4832 ), + ( #917, #4817, #4310, #4635, #5134, #4595, #4425, #4420, #4243, #4157, #3745, #3231, #3671, #3537, #3428, #3241, #3347, #3290 ), + ( #2697, #3279, #3098, #4683, #3079, #2932, #2753, #2739, #2713, #2564, #2831, #2653, #8840, #2492, #3716, #2425, #2328, #2115 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 2, 1, 2 ), + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( -0.2191260670662193400, 0.0000000000000000000, 1.000000000000000000 ), + ( -0.07853981633974484200, 0.1276272015520853700, 0.3337942194439155700, 0.5399612373357457500, 0.7461282552275759800, 0.9522952731194060900, 1.158462291011236300, 1.364629308903066600, 1.570796326794896800 ), + .UNSPECIFIED. ) ; +#6976 = EDGE_LOOP ( 'NONE', ( #5650, #1098, #10327, #1913 ) ) ; +#6977 = EDGE_CURVE ( 'NONE', #11729, #11976, #7246, .T. ) ; +#6978 = CARTESIAN_POINT ( 'NONE', ( 5.500835476811939600, -96.03959088941266500, 12.92966639746675600 ) ) ; +#6979 = CARTESIAN_POINT ( 'NONE', ( 38.05794954762654200, -30.94558464968772800, 23.22996871056179600 ) ) ; +#6980 = CARTESIAN_POINT ( 'NONE', ( 4.574125437917328600, -7.557122968630436000, -26.27809241864477800 ) ) ; +#6981 = CARTESIAN_POINT ( 'NONE', ( 6.854467239719504300, -30.85000192242599900, 23.38114731975395700 ) ) ; +#6982 = CARTESIAN_POINT ( 'NONE', ( 44.47235043307438900, -11.05554756682459700, 7.949836045983963700 ) ) ; +#6983 = CARTESIAN_POINT ( 'NONE', ( 7.299347705547714500, -100.0000000000000300, 18.50376388382506600 ) ) ; +#6984 = CARTESIAN_POINT ( 'NONE', ( 11.43037770269516300, -30.62009566265371100, 27.12290931707478900 ) ) ; +#6985 = CARTESIAN_POINT ( 'NONE', ( 5.974163709135651400, -19.69116780547634000, 13.47762015691632300 ) ) ; +#6986 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000900, 17.50000000000000400 ) ) ; +#6987 = ORIENTED_EDGE ( 'NONE', *, *, #11929, .T. ) ; +#6988 = CARTESIAN_POINT ( 'NONE', ( 32.44539482194931400, -10.37795839713753000, -25.06436594375332700 ) ) ; +#6989 = CARTESIAN_POINT ( 'NONE', ( 32.25968360155853500, -30.83141475389615100, 27.60628395298723300 ) ) ; +#6990 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#6991 = CARTESIAN_POINT ( 'NONE', ( 9.318164888785192400, -36.88762002862075200, 15.73384757444365100 ) ) ; +#6992 = CARTESIAN_POINT ( 'NONE', ( -0.3521049919744583300, -7.860484108248392100, 13.82224490706863300 ) ) ; +#6993 = ORIENTED_EDGE ( 'NONE', *, *, #5864, .F. ) ; +#6994 = CARTESIAN_POINT ( 'NONE', ( 6.845532425023703700, -94.75143542371346000, 8.444143851988986400 ) ) ; +#6995 = CARTESIAN_POINT ( 'NONE', ( 13.66277261506027300, -30.83480921769491100, 27.90631675262511600 ) ) ; +#6996 = CARTESIAN_POINT ( 'NONE', ( 38.95103112106845300, -28.87109882893306400, 21.75743724661848300 ) ) ; +#6997 = CARTESIAN_POINT ( 'NONE', ( 9.766196530480714300, -30.64500065387674300, 26.28684562116239200 ) ) ; +#6998 = CARTESIAN_POINT ( 'NONE', ( 10.50592105382546600, -16.63655602679391500, -24.80432773142131700 ) ) ; +#6999 = CARTESIAN_POINT ( 'NONE', ( 41.71141421233910100, -11.04367968225563600, -21.74578387254469500 ) ) ; +#7000 = CARTESIAN_POINT ( 'NONE', ( 34.63807457134093000, -93.14520756571464200, 21.11094159494347300 ) ) ; +#7001 = CARTESIAN_POINT ( 'NONE', ( 5.519309214034910500, -30.32115962906676300, 21.56958046324385900 ) ) ; +#7002 = CARTESIAN_POINT ( 'NONE', ( 37.79761078498388100, -30.28093144346785300, 24.58933543365446500 ) ) ; +#7003 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1769, #5804, #4769, #7932, #6892, #811, #8948, #1808, #2823, #7979, #850, #6937, #12924, #5891, #11968, #4858, #10969, #3828, #9954, #12809, #6671, #12689, #8991, #1857, #2870, #12012, #4905, #11013, #3871, #10001 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.003527582251430523100, 0.004945495886858617200, 0.006363409522286712600, 0.009199236793142910200, 0.01061715042857100000, 0.01203506406399908700, 0.01487089133485527100, 0.01628880497028336500, 0.01770671860571145300, 0.02054254587656763700, 0.02337837314742381700, 0.02479628678285190900, 0.02550524360056596200, 0.02585972200942298500, 0.02621420041828000400 ), + .UNSPECIFIED. ) ; +#7004 = CARTESIAN_POINT ( 'NONE', ( 38.92018599270085800, -14.58793358912210400, -25.80897647746081700 ) ) ; +#7005 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7024, #12994, #12082, #6011 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002228442565556897900 ), + .UNSPECIFIED. ) ; +#7006 = EDGE_CURVE ( 'NONE', #569, #9655, #5110, .T. ) ; +#7007 = LINE ( 'NONE', #5752, #1589 ) ; +#7008 = CARTESIAN_POINT ( 'NONE', ( 34.13934919507047300, -30.99432144971895700, 26.73318441886953800 ) ) ; +#7009 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -89.20772034660431900, 11.03354182248334900 ) ) ; +#7010 = ORIENTED_EDGE ( 'NONE', *, *, #206, .F. ) ; +#7011 = CARTESIAN_POINT ( 'NONE', ( 38.24254274514221700, -30.89751631240543600, 22.97166528028405000 ) ) ; +#7012 = AXIS2_PLACEMENT_3D ( 'NONE', #1353, #8493, #2354 ) ; +#7013 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -97.26512727427382300, 8.543711005773909400 ) ) ; +#7014 = CARTESIAN_POINT ( 'NONE', ( 8.092614054810457700, -30.31470499539184600, 25.26125724792221000 ) ) ; +#7015 = CARTESIAN_POINT ( 'NONE', ( 6.477456552214794000, -18.33505902453408300, -20.34409764500387800 ) ) ; +#7016 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#7017 = CARTESIAN_POINT ( 'NONE', ( 42.49999999999999300, 12.00000000000000000, -22.50000000000000000 ) ) ; +#7018 = CARTESIAN_POINT ( 'NONE', ( 39.33744480166120600, -30.17175052935482400, 22.63685975016922900 ) ) ; +#7019 = FACE_OUTER_BOUND ( 'NONE', #3740, .T. ) ; +#7020 = ORIENTED_EDGE ( 'NONE', *, *, #2135, .F. ) ; +#7021 = CARTESIAN_POINT ( 'NONE', ( -0.9456608605689155200, -7.834888278374363000, 10.94487753734524000 ) ) ; +#7022 = CARTESIAN_POINT ( 'NONE', ( 36.00969400463213100, -31.15038578978623100, 25.39127026035173900 ) ) ; +#7023 = EDGE_CURVE ( 'NONE', #3874, #7107, #2108, .T. ) ; +#7024 = CARTESIAN_POINT ( 'NONE', ( 2.504369967205455800, -10.44154865655181100, -20.92187104639650700 ) ) ; +#7025 = CARTESIAN_POINT ( 'NONE', ( 37.44912274603053200, -23.25284114638160900, -20.67927037268282200 ) ) ; +#7026 = EDGE_CURVE ( 'NONE', #8284, #9344, #4786, .T. ) ; +#7027 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.50836345810914500, 10.00775520641811400 ) ) ; +#7028 = CARTESIAN_POINT ( 'NONE', ( 38.34944218317755100, -30.86453812125016700, 22.80923214826240700 ) ) ; +#7029 = CARTESIAN_POINT ( 'NONE', ( 14.46655318406748200, -7.693899955086495300, -32.19007462203595100 ) ) ; +#7030 = CARTESIAN_POINT ( 'NONE', ( 6.463495434961941100, -29.85278545548147000, 23.78044198470939800 ) ) ; +#7031 = CARTESIAN_POINT ( 'NONE', ( 32.05501824756009900, -30.76265862922888100, 27.69068819762787100 ) ) ; +#7032 = CARTESIAN_POINT ( 'NONE', ( 11.54820920609172500, -31.03769256493925600, 27.05046685403877000 ) ) ; +#7033 = FACE_OUTER_BOUND ( 'NONE', #3922, .T. ) ; +#7034 = CARTESIAN_POINT ( 'NONE', ( 5.205067624928616100, -19.85622968669450800, 10.55299302123271600 ) ) ; +#7035 = CARTESIAN_POINT ( 'NONE', ( 44.64444425079231800, -7.370402864640374800, -19.58164019617231600 ) ) ; +#7036 = CARTESIAN_POINT ( 'NONE', ( 33.14602298450723300, -10.12222529835115400, -24.99999999999802500 ) ) ; +#7037 = CARTESIAN_POINT ( 'NONE', ( 32.05553161094184800, -30.66329807862129200, 27.70362269771956300 ) ) ; +#7038 = CARTESIAN_POINT ( 'NONE', ( 5.275771117877881400, -30.10019919777483800, 9.162597399323607000 ) ) ; +#7039 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#7040 = CARTESIAN_POINT ( 'NONE', ( 3.994618389362356600, -17.91629501997059000, -13.08035149114707400 ) ) ; +#7041 = CARTESIAN_POINT ( 'NONE', ( 13.66313478052852300, -30.81915217553024900, 27.90918302424982000 ) ) ; +#7042 = AXIS2_PLACEMENT_3D ( 'NONE', #12607, #11649, #10623 ) ; +#7043 = CARTESIAN_POINT ( 'NONE', ( 9.848771675956765400, -29.91912252123290000, 26.27744806762851600 ) ) ; +#7044 = CARTESIAN_POINT ( 'NONE', ( 0.9084284741246703200, -7.873854980448083300, 18.11134077736451100 ) ) ; +#7045 = CARTESIAN_POINT ( 'NONE', ( 5.216750789569587700, -29.35188454696637800, 17.29922460746998800 ) ) ; +#7046 = CARTESIAN_POINT ( 'NONE', ( 29.75477261373375300, -97.50591815125227400, 21.65948517488735800 ) ) ; +#7047 = CARTESIAN_POINT ( 'NONE', ( 5.519234514378137400, -29.12343724890033400, 21.78077891811079800 ) ) ; +#7048 = CARTESIAN_POINT ( 'NONE', ( 37.38863628975896300, -31.07158307686200900, 24.05397502373954000 ) ) ; +#7049 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 1, ( + ( #11653, #12099 ), + ( #11611, #11594 ), + ( #11570, #11551 ), + ( #11527, #11508 ), + ( #11486, #11444 ), + ( #11397, #11332 ), + ( #11290, #11272 ), + ( #11153, #11137 ), + ( #11112, #11091 ), + ( #11064, #11042 ), + ( #10976, #10926 ), + ( #10877, #10841 ), + ( #10800, #10781 ), + ( #10735, #10651 ), + ( #10587, #10548 ), + ( #10492, #10445 ), + ( #10430, #10418 ), + ( #10400, #10354 ), + ( #10265, #10222 ), + ( #10207, #10180 ), + ( #10160, #10110 ), + ( #10085, #10068 ), + ( #10048, #10031 ), + ( #10007, #9958 ), + ( #9914, #9856 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 1, 2, 2, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 0.1250000000000003900, 0.1875000000000004700, 0.2500000000000005600, 0.3749999999999998900, 0.4374999999999999400, 0.5000000000000000000, 0.6250000000000002200, 0.6875000000000003300, 0.7500000000000004400, 0.8125000000000005600, 0.8750000000000005600, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#7050 = VERTEX_POINT ( 'NONE', #5559 ) ; +#7051 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 7.000000000000000900, 17.50000000000000400 ) ) ; +#7052 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5409, #11514, #394, #7497, #1386, #8520, #2382, #9529, #3399, #10538 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0005350507183210032900, 0.008242852335832183400, 0.01209675314458777800, 0.01402370354896557300, 0.01595065395334336800 ), + .UNSPECIFIED. ) ; +#7053 = ADVANCED_FACE ( 'NONE', ( #1784 ), #4833, .F. ) ; +#7054 = CYLINDRICAL_SURFACE ( 'NONE', #4893, 5.000000000000000900 ) ; +#7055 = CARTESIAN_POINT ( 'NONE', ( 34.04307086726179000, -30.27840622624891500, 26.91048714453292200 ) ) ; +#7056 = CARTESIAN_POINT ( 'NONE', ( 0.6089440346591803400, -10.60556691314682000, 11.60038823661764900 ) ) ; +#7057 = CARTESIAN_POINT ( 'NONE', ( 38.44436952350460500, -30.83114891484026300, 22.65322170409300600 ) ) ; +#7058 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -95.28490972493072800, 8.995309444721415900 ) ) ; +#7059 = CARTESIAN_POINT ( 'NONE', ( 8.347764914777199500, -29.45616306219700700, 25.10372210236808100 ) ) ; +#7060 = CARTESIAN_POINT ( 'NONE', ( 6.077398382768391700, -14.58681394430782100, -25.80877905387124500 ) ) ; +#7061 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -5.000000000000000900, -25.00000000000000000 ) ) ; +#7062 = CARTESIAN_POINT ( 'NONE', ( 24.93761284503556700, -28.77726908290480500, 29.18906083666074700 ) ) ; +#7063 = CARTESIAN_POINT ( 'NONE', ( 0.6990312033972445600, -9.999999999999998200, 13.32741187784718800 ) ) ; +#7064 = AXIS2_PLACEMENT_3D ( 'NONE', #718, #10584, #11606 ) ; +#7065 = CARTESIAN_POINT ( 'NONE', ( 38.32591224021975100, -29.04364184626216500, 23.17264834282092800 ) ) ; +#7066 = CARTESIAN_POINT ( 'NONE', ( -1.095630335331053300, -7.808739329337814900, 8.005331014629284400 ) ) ; +#7067 = CARTESIAN_POINT ( 'NONE', ( 36.04715921529324200, -30.13110459815979800, 25.81616867533336900 ) ) ; +#7068 = CARTESIAN_POINT ( 'NONE', ( 38.83934252974908200, -20.32524522042762200, -17.48560328144548100 ) ) ; +#7069 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -95.04538050746499800, 6.962711608202548400 ) ) ; +#7070 = CARTESIAN_POINT ( 'NONE', ( 38.44937924400883100, -30.82937810120482100, 22.64496543239519600 ) ) ; +#7071 = CARTESIAN_POINT ( 'NONE', ( -1.063712209914130100, -7.872575580171660400, -11.53187062879840900 ) ) ; +#7072 = CARTESIAN_POINT ( 'NONE', ( 7.045751572547475300, -30.96924479475506000, 23.37181460045665200 ) ) ; +#7073 = CARTESIAN_POINT ( 'NONE', ( 44.09157152587821600, -7.873854980443964800, 18.11134077736177900 ) ) ; +#7074 = CARTESIAN_POINT ( 'NONE', ( 32.05550521622713200, -30.89447256179126100, 27.66328279986625200 ) ) ; +#7075 = CARTESIAN_POINT ( 'NONE', ( 11.52906480112679900, -30.71776654990943100, 27.15067745645395900 ) ) ; +#7076 = LINE ( 'NONE', #878, #7408 ) ; +#7077 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -19.99999999999988300, 8.005331014629282600 ) ) ; +#7078 = CARTESIAN_POINT ( 'NONE', ( 7.816531622141624800, -12.49999999999999300, -13.08635682985285900 ) ) ; +#7080 = AXIS2_PLACEMENT_3D ( 'NONE', #478, #6536, #12568 ) ; +#7079 = CARTESIAN_POINT ( 'NONE', ( 34.21664332230247400, -10.58095528211987200, -25.00000000000000000 ) ) ; +#7081 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999998200, -97.22545495475951300, 15.70974943198093500 ) ) ; +#7082 = CARTESIAN_POINT ( 'NONE', ( -1.095743358546450700, -7.821814132597502600, 9.475141231661693200 ) ) ; +#7083 = CARTESIAN_POINT ( 'NONE', ( 5.056614733699591500, -22.50961026808100100, -13.32734176709109500 ) ) ; +#7084 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344970100, 27.93780948130441300 ) ) ; +#7085 = EDGE_CURVE ( 'NONE', #8261, #6144, #2483, .T. ) ; +#7086 = ORIENTED_EDGE ( 'NONE', *, *, #6577, .T. ) ; +#7087 = CARTESIAN_POINT ( 'NONE', ( 9.986333539566302900, -30.89385972123640700, 26.30188611456438300 ) ) ; +#7088 = EDGE_LOOP ( 'NONE', ( #2942, #2997, #3086, #3238, #3249, #3309, #3415 ) ) ; +#7089 = CARTESIAN_POINT ( 'NONE', ( 35.05115605215831200, -13.10300255354066800, -25.00000000000001400 ) ) ; +#7090 = CARTESIAN_POINT ( 'NONE', ( 5.988321361050848800, -30.54737289066923700, 21.59200998405170700 ) ) ; +#7091 = CYLINDRICAL_SURFACE ( 'NONE', #7945, 1.200000000000008400 ) ; +#7092 = CARTESIAN_POINT ( 'NONE', ( 37.43995188799483700, -30.07936737807813900, 24.87634274736478100 ) ) ; +#7093 = CARTESIAN_POINT ( 'NONE', ( 34.06036835353730700, -30.79053499379936200, 26.85740529493168800 ) ) ; +#7094 = CARTESIAN_POINT ( 'NONE', ( 30.20278130558286000, -20.12134721044257900, 22.27694826346257500 ) ) ; +#7095 = ORIENTED_EDGE ( 'NONE', *, *, #10758, .F. ) ; +#7096 = CARTESIAN_POINT ( 'NONE', ( 38.45718173565390400, -30.82659917448293600, 22.63205108789606300 ) ) ; +#7097 = CARTESIAN_POINT ( 'NONE', ( 2.369126036071950800, 11.93493164662855900, -23.15436981963976500 ) ) ; +#7098 = CARTESIAN_POINT ( 'NONE', ( 8.293610664423194800, -30.55483354614852900, 25.33038571835983500 ) ) ; +#7099 = LINE ( 'NONE', #760, #9792 ) ; +#7100 = CARTESIAN_POINT ( 'NONE', ( 9.670626714430323300, -10.10678625160153000, 24.98117070267392800 ) ) ; +#7101 = CARTESIAN_POINT ( 'NONE', ( 0.5278440750958757200, -11.05571972934381000, 7.998280019220370500 ) ) ; +#7102 = CARTESIAN_POINT ( 'NONE', ( 44.47197258882613400, -11.05587287267797500, -11.49385566159615600 ) ) ; +#7103 = CARTESIAN_POINT ( 'NONE', ( 41.15537051365254200, -11.23571604708998500, -22.46755997374652500 ) ) ; +#7104 = EDGE_CURVE ( 'NONE', #8077, #11902, #4152, .T. ) ; +#7105 = CARTESIAN_POINT ( 'NONE', ( 39.05233050108174100, -29.92985307490138100, 23.17352801996275200 ) ) ; +#7106 = CARTESIAN_POINT ( 'NONE', ( 4.809594857150084800, -10.22483721569526900, 21.04512673853331600 ) ) ; +#7107 = VERTEX_POINT ( 'NONE', #1740 ) ; +#7108 = CARTESIAN_POINT ( 'NONE', ( 36.00551919858075000, -30.92503839157852100, 25.61542958533200600 ) ) ; +#7109 = CARTESIAN_POINT ( 'NONE', ( 28.50066813881438000, -20.01385634412569900, 22.81368892163529000 ) ) ; +#7110 = CARTESIAN_POINT ( 'NONE', ( 40.76721184611427900, -17.93586104864102600, -14.92880850492019100 ) ) ; +#7111 = VERTEX_POINT ( 'NONE', #3839 ) ; +#7112 = CARTESIAN_POINT ( 'NONE', ( 38.98810725790978900, -93.66222730503194800, 4.589318382291547300 ) ) ; +#7113 = CARTESIAN_POINT ( 'NONE', ( 38.46880177232463200, -30.82243460952575400, 22.61274918621942500 ) ) ; +#7114 = CARTESIAN_POINT ( 'NONE', ( 6.983106711959155900, -94.86873859399379700, 9.066550904855601400 ) ) ; +#7115 = CARTESIAN_POINT ( 'NONE', ( 2.227052546285313000, -10.00000000000000000, -20.94917749288623600 ) ) ; +#7116 = ADVANCED_FACE ( 'NONE', ( #9601 ), #9282, .T. ) ; +#7117 = CARTESIAN_POINT ( 'NONE', ( 6.513640383580374200, -30.15791530178266600, 23.86472466093353300 ) ) ; +#7118 = CARTESIAN_POINT ( 'NONE', ( 31.74770357330249800, -30.75686735281320200, 27.79217481477440500 ) ) ; +#7119 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -99.99999999999998600, -6.100827442047409100 ) ) ; +#7120 = CARTESIAN_POINT ( 'NONE', ( 11.54726535422092900, -30.33466465943454100, 27.17659061178194300 ) ) ; +#7121 = ORIENTED_EDGE ( 'NONE', *, *, #1041, .F. ) ; +#7122 = AXIS2_PLACEMENT_3D ( 'NONE', #1157, #1021, #982 ) ; +#7123 = CARTESIAN_POINT ( 'NONE', ( 12.67810698633726400, -12.50000000000001600, -20.53646757281730500 ) ) ; +#7124 = EDGE_LOOP ( 'NONE', ( #12085, #9973, #7592, #2596, #5010 ) ) ; +#7125 = ORIENTED_EDGE ( 'NONE', *, *, #5628, .T. ) ; +#7126 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 9.500000000000000000, 19.48143887112370700 ) ) ; +#7127 = CARTESIAN_POINT ( 'NONE', ( 5.092607973289656100, -20.08915734312445200, -13.31070349358074600 ) ) ; +#7128 = ORIENTED_EDGE ( 'NONE', *, *, #7844, .T. ) ; +#7129 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375000, -30.82654731344970900, 27.93780948130439900 ) ) ; +#7130 = CARTESIAN_POINT ( 'NONE', ( 10.26057644352793500, -12.19623197613733500, 24.38134862614858300 ) ) ; +#7131 = CARTESIAN_POINT ( 'NONE', ( 44.97161784026552300, 9.894538436513098400, -1.388060368969690900 ) ) ; +#7132 = CARTESIAN_POINT ( 'NONE', ( 9.986337192726395500, -30.20381079628965900, 26.42357364074176100 ) ) ; +#7133 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000001400, -12.50000000000001100, 10.16070531917194800 ) ) ; +#7134 = CARTESIAN_POINT ( 'NONE', ( 43.73088869261626900, -8.973361689139649000, 16.54035294287880500 ) ) ; +#7135 = ORIENTED_EDGE ( 'NONE', *, *, #12283, .F. ) ; +#7136 = CARTESIAN_POINT ( 'NONE', ( 5.076434434289896400, -29.50957433457021800, 21.77618033514116300 ) ) ; +#7137 = CARTESIAN_POINT ( 'NONE', ( 37.19784128540735700, -30.98831051977616700, 24.46116858591082300 ) ) ; +#7138 = ORIENTED_EDGE ( 'NONE', *, *, #10226, .T. ) ; +#7139 = CARTESIAN_POINT ( 'NONE', ( 20.18719255689188000, -31.29913968154958300, 28.74438700826459600 ) ) ; +#7140 = AXIS2_PLACEMENT_3D ( 'NONE', #2263, #2218, #2283 ) ; +#7141 = CARTESIAN_POINT ( 'NONE', ( 33.83908071275673300, -30.22433342252401900, 26.99674488305389600 ) ) ; +#7142 = CARTESIAN_POINT ( 'NONE', ( 32.66548286124874800, -27.15669239249395500, 19.87850274210605400 ) ) ; +#7143 = CARTESIAN_POINT ( 'NONE', ( 38.49533167591791000, -30.81274708966162400, 22.56820077762273500 ) ) ; +#7144 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -97.50836345810913000, 10.00775520641744400 ) ) ; +#7145 = EDGE_LOOP ( 'NONE', ( #8573, #758, #6141, #1075, #3731, #1398 ) ) ; +#7146 = CARTESIAN_POINT ( 'NONE', ( 8.449038291101240700, -29.63671516753306900, 25.29530587505845300 ) ) ; +#7147 = CARTESIAN_POINT ( 'NONE', ( 10.65545010010271900, -12.11878361786426300, 24.62640128188744300 ) ) ; +#7148 = CARTESIAN_POINT ( 'NONE', ( 3.648302095517612700E-014, -9.999884512654375600, 8.077011019212900300 ) ) ; +#7149 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999982900, -9.999011982831591500, -11.68151797616620700 ) ) ; +#7150 = CARTESIAN_POINT ( 'NONE', ( 37.65264831887643000, -29.41858962256780100, 25.15319121266773200 ) ) ; +#7151 = ORIENTED_EDGE ( 'NONE', *, *, #11608, .T. ) ; +#7152 = CARTESIAN_POINT ( 'NONE', ( 38.32738447994812200, -30.87131345181153100, 22.85027251455492300 ) ) ; +#7153 = CARTESIAN_POINT ( 'NONE', ( 3.372184831110085900, -9.729230643683379800, 22.68806086731483200 ) ) ; +#7154 = CARTESIAN_POINT ( 'NONE', ( 35.78876618406610500, -29.82835674469689400, 25.87691953878086400 ) ) ; +#7155 = EDGE_CURVE ( 'NONE', #4526, #10284, #1478, .T. ) ; +#7156 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -21.33754197757975400, -10.54351474555441300 ) ) ; +#7157 = CARTESIAN_POINT ( 'NONE', ( 40.00130924330689900, -22.38930915540783700, -12.15741158991354400 ) ) ; +#7158 = ORIENTED_EDGE ( 'NONE', *, *, #12667, .F. ) ; +#7159 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -90.07596123493894400, -4.350951650170342700 ) ) ; +#7160 = CARTESIAN_POINT ( 'NONE', ( 38.54607636965970800, -30.79351532073582500, 22.48107745598459700 ) ) ; +#7161 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -95.26318031278478300, 10.28785978983459500 ) ) ; +#7162 = CARTESIAN_POINT ( 'NONE', ( 11.40427608016229800, -20.71403959325699200, -24.18404770231905200 ) ) ; +#7163 = ORIENTED_EDGE ( 'NONE', *, *, #8852, .F. ) ; +#7164 = CIRCLE ( 'NONE', #7012, 5.000000000000001800 ) ; +#7165 = CARTESIAN_POINT ( 'NONE', ( 7.044550451835444700, -29.13200557994209600, 23.69648194153869300 ) ) ; +#7166 = CARTESIAN_POINT ( 'NONE', ( 5.000000000042483400, -26.90723010814651100, 7.764646783584749900 ) ) ; +#7167 = CARTESIAN_POINT ( 'NONE', ( 31.74770516176697700, -30.84221568085750700, 27.77712499912819100 ) ) ; +#7168 = CARTESIAN_POINT ( 'NONE', ( 0.9084284741214345700, -7.873854980443476300, 18.11134077736142000 ) ) ; +#7169 = CARTESIAN_POINT ( 'NONE', ( 11.73102475805095300, -30.83081124769657300, 27.21033578331166300 ) ) ; +#7170 = CARTESIAN_POINT ( 'NONE', ( 33.58942613950736000, -100.0000000000000100, -34.89671252249890200 ) ) ; +#7171 = CARTESIAN_POINT ( 'NONE', ( 34.09324170656425700, -12.53172435753594400, 24.55358868804962600 ) ) ; +#7172 = CARTESIAN_POINT ( 'NONE', ( 5.604536116954674800, -10.48918512259232300, 23.20472290731980500 ) ) ; +#7173 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, 9.723972447247820800, 19.19885073465396600 ) ) ; +#7174 = CARTESIAN_POINT ( 'NONE', ( 4.021637179584616600, -17.91961362503490600, -13.39236152698363600 ) ) ; +#7175 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1133, #1004, #900, #854, #815, #774, #744, #729, #701, #688, #664, #649, #616, #600 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0001524425218512123600, 0.0003048850437024247300, 0.0006097700874048502100, 0.001219540174809696500, 0.002439080349619398300, 0.004878160699238800900 ), + .UNSPECIFIED. ) ; +#7176 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344970100, 27.93780948130441300 ) ) ; +#7177 = CARTESIAN_POINT ( 'NONE', ( 41.00579648726133500, -17.98840702547727200, -11.51013982824777500 ) ) ; +#7178 = FACE_OUTER_BOUND ( 'NONE', #2786, .T. ) ; +#7179 = CARTESIAN_POINT ( 'NONE', ( 10.39807514146994000, -31.09058422743737200, 26.42391198296387600 ) ) ; +#7180 = CARTESIAN_POINT ( 'NONE', ( 36.25470228449976400, -100.0000000000000300, -0.4996131600212474500 ) ) ; +#7181 = EDGE_LOOP ( 'NONE', ( #10453, #10769, #11079 ) ) ; +#7182 = CARTESIAN_POINT ( 'NONE', ( 1.213339059705188300, -8.307297208731309700, -20.66483283403820800 ) ) ; +#7183 = CARTESIAN_POINT ( 'NONE', ( 42.69957195451928600, -9.284695385923672700, 18.27734144656406600 ) ) ; +#7184 = CARTESIAN_POINT ( 'NONE', ( 6.103915577674627900, -30.60837917987825200, 21.70041860512656500 ) ) ; +#7185 = CARTESIAN_POINT ( 'NONE', ( 37.12227066094402500, -29.69797211827498600, 24.93546706815879700 ) ) ; +#7186 = CARTESIAN_POINT ( 'NONE', ( 5.333205908805741300, -28.69981206176160900, 18.68579921576983700 ) ) ; +#7187 = ADVANCED_FACE ( 'NONE', ( #6887 ), #168, .T. ) ; +#7188 = EDGE_CURVE ( 'NONE', #4221, #10144, #1170, .T. ) ; +#7189 = CARTESIAN_POINT ( 'NONE', ( 33.86713443921770100, -30.67562408859890500, 26.97915949044439900 ) ) ; +#7190 = CARTESIAN_POINT ( 'NONE', ( 37.76534394987298500, -28.85816096546507800, 23.83786115661992300 ) ) ; +#7191 = FACE_OUTER_BOUND ( 'NONE', #9938, .T. ) ; +#7192 = CARTESIAN_POINT ( 'NONE', ( 38.58566745018487200, -30.77735894932406400, 22.40983709186553000 ) ) ; +#7193 = CC_DESIGN_SECURITY_CLASSIFICATION ( #3724, ( #398 ) ) ; +#7194 = CARTESIAN_POINT ( 'NONE', ( 7.248879850806199300, -95.03089605088747800, 10.29465736413516000 ) ) ; +#7195 = CARTESIAN_POINT ( 'NONE', ( 8.647061698765885000, -30.91414522015507400, 25.35262280470513800 ) ) ; +#7196 = CARTESIAN_POINT ( 'NONE', ( 34.62776763837272400, -7.516014948806732900, -30.68231123773678700 ) ) ; +#7197 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, -8.806496683219139100, 8.425117196774689200 ) ) ; +#7198 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, -8.794366477523459100, -12.23504878364759400 ) ) ; +#7199 = CARTESIAN_POINT ( 'NONE', ( 34.38848432154017600, -32.20398721860598100, 26.52492743992507900 ) ) ; +#7200 = CARTESIAN_POINT ( 'NONE', ( 38.74043195313314000, -29.64582802564159900, 23.44326164547613100 ) ) ; +#7201 = CARTESIAN_POINT ( 'NONE', ( 5.025395779658199800, -12.05030693730244100, 19.76669286279198100 ) ) ; +#7202 = CARTESIAN_POINT ( 'NONE', ( 35.88701814991439700, -30.62338693944044400, 25.88412040289961900 ) ) ; +#7203 = CARTESIAN_POINT ( 'NONE', ( 11.26032016546449400, -12.72975164781057500, -25.12294742255550200 ) ) ; +#7204 = CARTESIAN_POINT ( 'NONE', ( 40.00504909583988000, -19.99292893698373800, -11.59766336697511600 ) ) ; +#7205 = ORIENTED_EDGE ( 'NONE', *, *, #4161, .T. ) ; +#7206 = CARTESIAN_POINT ( 'NONE', ( 5.358001470925952200, -26.50214246161112900, 6.766932290922958300 ) ) ; +#7207 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -97.57596123255582700, 10.74922904676240700 ) ) ; +#7208 = CARTESIAN_POINT ( 'NONE', ( 6.764246152604848700, -30.47806649112321200, 23.96311506624516600 ) ) ; +#7209 = FACE_OUTER_BOUND ( 'NONE', #5222, .T. ) ; +#7210 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000016000, -27.26143816088749000, 7.897726575763654100 ) ) ; +#7211 = CARTESIAN_POINT ( 'NONE', ( 31.64576628975524000, -30.74982034752245900, 27.82568026290138300 ) ) ; +#7212 = CARTESIAN_POINT ( 'NONE', ( 0.07543190977757639700, -6.241693506987349600, 16.16709403768784300 ) ) ; +#7213 = CARTESIAN_POINT ( 'NONE', ( 11.73505441111241000, -30.49421034791162600, 27.26031145979564500 ) ) ; +#7214 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000001800, -5.000000000000000900, -24.99999999999999600 ) ) ; +#7215 = CARTESIAN_POINT ( 'NONE', ( 31.32360257028808800, -15.73213864605480000, 23.98926929953889000 ) ) ; +#7216 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7217 = CARTESIAN_POINT ( 'NONE', ( 44.97167428080928200, 9.894175532731914300, 18.88869844314350700 ) ) ; +#7218 = CARTESIAN_POINT ( 'NONE', ( 5.147937843874247600, -22.59915865092927900, -14.20009889408581600 ) ) ; +#7219 = DIRECTION ( 'NONE', ( -6.938893903907221500E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7220 = CARTESIAN_POINT ( 'NONE', ( 7.279209998026012800, -12.64562761898871600, 21.81106570198413100 ) ) ; +#7221 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #204, #10403, #4281 ), + ( #11428, #5307, #12395 ), + ( #6346, #295, #7402 ), + ( #1296, #8435, #2295 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 6.112832822670769600E-005 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7941476793044255400, 1.000000000000000000), + ( 1.000000000000000000, 0.7941422074671484800, 1.000000000000000000), + ( 1.000000000000000000, 0.7941353925969089100, 1.000000000000000000), + ( 1.000000000000000000, 0.7941272348423907800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#7222 = AXIS2_PLACEMENT_3D ( 'NONE', #679, #636, #551 ) ; +#7223 = CARTESIAN_POINT ( 'NONE', ( 10.34761531579896300, -30.50008625117892800, 26.62309134984413500 ) ) ; +#7224 = FACE_OUTER_BOUND ( 'NONE', #10811, .T. ) ; +#7225 = CARTESIAN_POINT ( 'NONE', ( 32.68167656173560000, -12.50000000000001100, 19.40618536839656000 ) ) ; +#7226 = CARTESIAN_POINT ( 'NONE', ( 1.751120735233666600, -8.800629358799852800, -23.00000000000000000 ) ) ; +#7227 = CARTESIAN_POINT ( 'NONE', ( 42.43263198365647100, -9.375634717929029800, 21.08016040500582000 ) ) ; +#7228 = CARTESIAN_POINT ( 'NONE', ( 5.052601896853652800, -29.87053735684540700, 21.82267599157854900 ) ) ; +#7229 = CARTESIAN_POINT ( 'NONE', ( 10.11423849738465600, -13.36407974370885700, -25.00000000000002800 ) ) ; +#7230 = CARTESIAN_POINT ( 'NONE', ( 37.20783551826199400, -30.67026698215871900, 24.85827099689805700 ) ) ; +#7231 = CARTESIAN_POINT ( 'NONE', ( 5.000075756955960000, -27.13802799522546700, 7.068143310276223400 ) ) ; +#7232 = CARTESIAN_POINT ( 'NONE', ( 33.83900602033866500, -31.07114905532088000, 26.84726791674901800 ) ) ; +#7233 = CARTESIAN_POINT ( 'NONE', ( 36.81072254668809800, -21.42392200479095300, 17.15368355670666700 ) ) ; +#7234 = FACE_OUTER_BOUND ( 'NONE', #5070, .T. ) ; +#7235 = CARTESIAN_POINT ( 'NONE', ( 38.65980843793342100, -30.74569801506609700, 22.27206564983740100 ) ) ; +#7236 = CARTESIAN_POINT ( 'NONE', ( 8.595961313994637400, -30.06313108422982000, 25.57181897052287300 ) ) ; +#7237 = CARTESIAN_POINT ( 'NONE', ( 43.00094240740461500, -7.775819397170368000, -22.71867333393822000 ) ) ; +#7238 = CARTESIAN_POINT ( 'NONE', ( 0.6006202405538654300, -10.65532956672521400, 11.32611269915208800 ) ) ; +#7239 = CARTESIAN_POINT ( 'NONE', ( 44.41326250876676300, -10.50702106932030600, -15.25058762210500700 ) ) ; +#7240 = CARTESIAN_POINT ( 'NONE', ( 28.24164687877942000, -33.18407038829874300, 26.28654231692989600 ) ) ; +#7241 = CARTESIAN_POINT ( 'NONE', ( 38.40031807376094300, -30.76459339233920400, 23.12517978085674000 ) ) ; +#7242 = CARTESIAN_POINT ( 'NONE', ( 4.640664781515448900, -10.20413285901594900, 20.85820614003595400 ) ) ; +#7243 = LINE ( 'NONE', #11964, #6909 ) ; +#7244 = CARTESIAN_POINT ( 'NONE', ( 35.66386248804965900, -29.72295247782721400, 25.90410591575486900 ) ) ; +#7245 = CARTESIAN_POINT ( 'NONE', ( 12.02623836190151800, -10.42560824071505000, -25.05130590403558300 ) ) ; +#7246 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7515, #9547, #5470, #12544, #6507, #445, #7558, #1447, #8584, #2434, #9588, #3461, #10595, #4470, #11619, #5514, #12580, #6548, #490, #7596 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0007596142882330281900, 0.001519228576466056400, 0.001899035720582568300, 0.002278842864699080700, 0.002468746436757335100, 0.002563698222786463000, 0.002658650008815591300, 0.002848553580873844400, 0.003038457152932098000 ), + .UNSPECIFIED. ) ; +#7247 = CARTESIAN_POINT ( 'NONE', ( 38.70251698785046600, -30.72546301770267300, 22.18650269911898200 ) ) ; +#7248 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -19.99999999999987600, -7.373247840157476100 ) ) ; +#7249 = CARTESIAN_POINT ( 'NONE', ( 34.27008883132317900, -19.20750601777580600, -24.45009175777595400 ) ) ; +#7250 = ADVANCED_FACE ( 'NONE', ( #7224 ), #10971, .F. ) ; +#7251 = CARTESIAN_POINT ( 'NONE', ( 7.016884517032171900, -29.36387879031802200, 23.95826371740992400 ) ) ; +#7252 = CARTESIAN_POINT ( 'NONE', ( 31.64468598939815900, -30.81501531673587000, 27.81538640794240900 ) ) ; +#7253 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000900, 14.31000000000000900 ) ) ; +#7254 = CARTESIAN_POINT ( 'NONE', ( 11.83828860302518200, -30.96119817284506200, 27.21223818101629300 ) ) ; +#7255 = ORIENTED_EDGE ( 'NONE', *, *, #11608, .F. ) ; +#7256 = ORIENTED_EDGE ( 'NONE', *, *, #9700, .F. ) ; +#7257 = CARTESIAN_POINT ( 'NONE', ( 28.50223194758536100, -18.03747150242514500, 23.58277691744709500 ) ) ; +#7258 = CARTESIAN_POINT ( 'NONE', ( 38.98025089164448800, -30.53890501263930400, 21.46335736016444100 ) ) ; +#7259 = CIRCLE ( 'NONE', #8822, 2.999999999999999100 ) ; +#7260 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#7261 = CARTESIAN_POINT ( 'NONE', ( 3.255043602690012700, -9.687298331169557700, 22.45815912818257600 ) ) ; +#7262 = CARTESIAN_POINT ( 'NONE', ( 5.207293701753621400, -20.13805930970259100, -14.17820193479590400 ) ) ; +#7263 = ADVANCED_FACE ( 'NONE', ( #8964, #3515 ), #4284, .F. ) ; +#7264 = DIRECTION ( 'NONE', ( 5.225795954830081500E-015, 0.9848077530122093500, 0.1736481776669238600 ) ) ; +#7265 = CARTESIAN_POINT ( 'NONE', ( 1.063952872802720300, -8.688022367350557200, 16.43727419918954500 ) ) ; +#7266 = EDGE_CURVE ( 'NONE', #5688, #1924, #8642, .T. ) ; +#7267 = CARTESIAN_POINT ( 'NONE', ( 18.50664919057090800, -31.29892962639993600, 28.74442404665491300 ) ) ; +#7268 = CARTESIAN_POINT ( 'NONE', ( 10.59142958361658400, -31.11604929535903000, 26.51877735493491900 ) ) ; +#7269 = CARTESIAN_POINT ( 'NONE', ( 28.28987907430277500, -100.0000000000000300, 6.210915839114804300 ) ) ; +#7270 = CARTESIAN_POINT ( 'NONE', ( 38.62091540208158600, -9.537116840473887100, -24.83126158399887700 ) ) ; +#7271 = CARTESIAN_POINT ( 'NONE', ( 38.79266749857995900, -12.50030223058532500, 20.85771616840263200 ) ) ; +#7272 = VERTEX_POINT ( 'NONE', #299 ) ; +#7273 = CARTESIAN_POINT ( 'NONE', ( 6.072564712090187600, -28.91036354869254800, 21.99932463687032000 ) ) ; +#7274 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999997300, -95.07596123493893000, 11.50239124669685800 ) ) ; +#7275 = CARTESIAN_POINT ( 'NONE', ( 36.66225154461796600, -29.47845435393361100, 25.11273662568384100 ) ) ; +#7276 = VERTEX_POINT ( 'NONE', #9404 ) ; +#7277 = CARTESIAN_POINT ( 'NONE', ( 33.76724460556785300, -30.58240677997310900, 27.03887624289099600 ) ) ; +#7278 = CARTESIAN_POINT ( 'NONE', ( 37.46448479423187200, -26.13498476956098000, 15.54672872871959100 ) ) ; +#7279 = CARTESIAN_POINT ( 'NONE', ( 38.74005063362516700, -30.70605213644959300, 22.10502393656154400 ) ) ; +#7280 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -95.07596123493893000, 11.50239124669685800 ) ) ; +#7281 = VERTEX_POINT ( 'NONE', #10452 ) ; +#7282 = ORIENTED_EDGE ( 'NONE', *, *, #3337, .F. ) ; +#7283 = CARTESIAN_POINT ( 'NONE', ( 8.824082104666494800, -31.14750409418283900, 25.25262508901076300 ) ) ; +#7284 = CARTESIAN_POINT ( 'NONE', ( 1.964095609283709900, -95.07596123493894400, 4.526934840690820700 ) ) ; +#7285 = CARTESIAN_POINT ( 'NONE', ( 45.00010715320051700, -9.999999999999992900, -12.92752995180902800 ) ) ; +#7286 = CARTESIAN_POINT ( 'NONE', ( 1.835746347684588600E-012, -8.507441999671408800, 13.78058686033150700 ) ) ; +#7287 = CARTESIAN_POINT ( 'NONE', ( 45.00000000001570300, -8.073272094409427200, -17.91267891778895900 ) ) ; +#7288 = EDGE_CURVE ( 'NONE', #1071, #7948, #6235, .T. ) ; +#7289 = ORIENTED_EDGE ( 'NONE', *, *, #11530, .F. ) ; +#7290 = CARTESIAN_POINT ( 'NONE', ( 38.19465659333029400, -29.30190080358232400, 23.68362387213341300 ) ) ; +#7291 = ORIENTED_EDGE ( 'NONE', *, *, #2135, .T. ) ; +#7292 = CARTESIAN_POINT ( 'NONE', ( 35.80294625548359700, -30.45069740708554600, 25.98687375890337100 ) ) ; +#7293 = CARTESIAN_POINT ( 'NONE', ( 10.25700900595683000, -19.13678118871984400, -24.15815272935094900 ) ) ; +#7294 = ORIENTED_EDGE ( 'NONE', *, *, #9458, .T. ) ; +#7295 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 3, ( + ( #12974, #6996, #6527, #10828, #10740, #12020, #3693, #5938, #1865, #12660, #9608, #4912, #584, #11558, #11107, #4753, #6176, #202, #12826, #937, #1738, #3299, #5163, #12268, #6205, #151, #7258, #1162, #8291, #2163 ), + ( #9297, #3179, #10306, #4185, #11330, #5213, #12308, #6249, #199, #7306, #1201, #8332, #2205, #9339, #3220, #10353, #4229, #11374, #5255, #12352, #6294, #245, #7350, #1249, #8376, #2252, #9393, #3264, #10399, #4277 ), + ( #11423, #5303, #12390, #6342, #289, #7398, #1289, #8430, #2290, #9435, #3315, #10443, #4318, #11468, #5354, #12436, #6390, #341, #7442, #1334, #8476, #2335, #9476, #3354, #10490, #4357, #11507, #5402, #12480, #6432 ), + ( #384, #7489, #1379, #8514, #2375, #9520, #3394, #10530, #4405, #11549, #5444, #12518, #6477, #422, #7530, #1424, #8553, #2412, #9563, #3436, #10565, #4445, #11592, #5484, #12556, #6521, #461, #7568, #1458, #8602 ), + ( #2451, #9602, #3479, #10611, #4483, #11632, #5528, #12593, #6563, #506, #7610, #1498, #8639, #2498, #9640, #3516, #10649, #4524, #11669, #5571, #12635, #6607, #542, #7654, #1542, #8681, #2543, #9685, #3558, #10690 ), + ( #4571, #11715, #5611, #12676, #6654, #579, #7696, #1590, #8723, #2586, #9726, #3606, #10733, #4615, #11754, #5660, #12714, #6701, #624, #7740, #1630, #8768, #2626, #9766, #3652, #10780, #4658, #11791, #5707, #12754 ), + ( #6743, #669, #7783, #1670, #8810, #2678, #9809, #3688, #10820, #4707, #11833, #5747, #12793, #6784, #706, #7829, #1712, #8845, #2719, #9855, #3723, #10859, #4752, #11874, #5785, #12834, #6836, #751, #7871, #1755 ), + ( #8891, #2759, #9896, #3767, #10903, #4796, #11917, #5832, #12873, #6879, #797, #7913, #1792, #8935, #2806, #9936, #3813, #10954, #4841, #11955, #5875, #12911, #6918, #837, #7962, #1838, #8976, #2852, #9984, #3855 ), + ( #10999, #4886, #11995, #5916, #12948, #6966, #874, #8007, #1888, #9019, #2896, #10029, #3902, #11039, #4931, #12038, #5959, #12990, #7018, #926, #8042, #1928, #9067, #2939, #10066, #3941, #11090, #4972, #12080, #6007 ), + ( #13030, #7065, #971, #8091, #1968, #9106, #2988, #10109, #3982, #11134, #5022, #12119, #6051, #13076, #7105, #1009, #8133, #2017, #9150, #3031, #10159, #4028, #11180, #5068, #12165, #6096, #44, #7152, #1053, #8177 ), + ( #2063, #9194, #3073, #10206, #4080, #11221, #5109, #12208, #6142, #89, #7200, #1100, #8227, #2106, #9240, #3114, #10248, #4126, #11271, #5150, #12255, #6190, #137, #7241, #1146, #8274, #2147, #9281, #3163, #10291 ), + ( #4170, #11317, #5197, #12294, #6234, #183, #7290, #1187, #8318, #2191, #9326, #3204, #10339, #4217, #11357, #5239, #12338, #6280, #231, #7335, #1234, #8358, #2236, #9375, #3248, #10384, #4261, #11407, #5288, #12381 ), + ( #6329, #274, #7379, #1277, #8411, #2275, #9422, #3298, #10429, #4303, #11453, #5335, #12422, #6372, #325, #7427, #1322, #8456, #2320, #9465, #3342, #10475, #4344, #11494, #5388, #12463, #6417, #373, #7476, #1363 ), + ( #8501, #2363, #9505, #3379, #10519, #4389, #11536, #5429, #12505, #6462, #411, #7516, #1410, #8541, #2401, #9550, #3421, #10555, #4432, #11579, #5471, #12547, #6510, #447, #7559, #1449, #8586, #2435, #9591, #3465 ), + ( #10597, #4471, #11620, #5516, #12582, #6550, #493, #7599, #1486, #8628, #2485, #9628, #3505, #10638, #4509, #11660, #5561, #12622, #6592, #531, #7641, #1527, #8669, #2529, #9672, #3544, #10677, #4555, #11700, #5599 ), + ( #12665, #6643, #565, #7682, #1576, #8709, #2572, #9713, #3591, #10716, #4603, #11740, #5646, #12702, #6686, #609, #7724, #1615, #8754, #2612, #9753, #3639, #10765, #4643, #11780, #5691, #12742, #6731, #657, #7768 ), + ( #1656, #8795, #2662, #9793, #3676, #10807, #4693, #11819, #5735, #12780, #6772, #694, #7815, #1699, #8835, #2705, #9840, #3711, #10848, #4738, #11860, #5772, #12818, #6819, #737, #7857, #1742, #8875, #2747, #9882 ), + ( #3753, #10887, #4784, #11901, #5817, #12861, #6866, #782, #7901, #1781, #8922, #2791, #9923, #3796, #10937, #4826, #11945, #5861, #12899, #6904, #825, #7947, #1824, #8961, #2838, #9967, #3841, #10985, #4871, #11982 ), + ( #5902, #12935, #6951, #862, #7993, #1872, #9005, #2883, #10016, #3886, #11027, #4920, #12028, #5947, #12980, #7002, #910, #8033, #1917, #9053, #2926, #10054, #3929, #11073, #4961, #12069, #5993, #13020, #7048, #958 ), + ( #8076, #1955, #9096, #2974, #10096, #3971, #11123, #5002, #12107, #6038, #13064, #7092, #998, #8120, #2002, #9139, #3018, #10143, #4013, #11166, #5052, #12149, #6082, #31, #7137, #1038, #8164, #2051, #9179, #3060 ), + ( #10193, #4062, #11209, #5096, #12195, #6127, #75, #7185, #1085, #8211, #2093, #9226, #3099, #10236, #4112, #11255, #5135, #12241, #6175, #121, #7230, #1134, #8259, #2132, #9270, #3148, #10276, #4158, #11303, #5181 ), + ( #12281, #6219, #166, #7275, #1176, #8306, #2176, #9311, #3192, #10322, #4201, #11345, #5228, #12322, #6263, #215, #7319, #1216, #8345, #2220, #9355, #3232, #10367, #4245, #11389, #5269, #12365, #6311, #257, #7365 ), + ( #1261, #8390, #2264, #9408, #3280, #10412, #4289, #11435, #5318, #12406, #6355, #304, #7411, #1306, #8442, #2302, #9447, #3326, #10457, #4327, #11481, #5369, #12446, #6403, #359, #7456, #1348, #8488, #2346, #9491 ), + ( #3368, #10506, #4371, #11522, #5416, #12493, #6447, #399, #7502, #1392, #8527, #2389, #9533, #3405, #9815, #3692, #10826, #4711, #11836, #5751, #12797, #6789, #710, #7833, #1717, #8850, #2722, #9858, #3728, #10863 ), + ( #4757, #11878, #5792, #12836, #6839, #755, #7876, #1759, #8894, #2764, #9899, #3770, #10908, #4800, #11920, #5835, #12877, #6882, #799, #7918, #1796, #8939, #2810, #9942, #3816, #10957, #4846, #11959, #5878, #12915 ), + ( #6924, #839, #7964, #1843, #8980, #2856, #9988, #3860, #11001, #4889, #11998, #5920, #12952, #6971, #880, #8008, #1891, #9024, #2900, #10033, #3905, #11045, #4933, #12040, #5964, #12992, #7022, #929, #8047, #1930 ), + ( #9069, #2943, #10069, #3945, #11093, #4977, #12081, #6009, #13033, #7067, #975, #8094, #1973, #9110, #2990, #10112, #3986, #11138, #5025, #12122, #6053, #1, #7108, #1012, #8138, #2019, #9153, #3035, #10162, #4032 ), + ( #11183, #5071, #12169, #6099, #46, #7154, #1056, #8180, #2068, #9197, #3076, #10208, #4082, #11224, #5113, #12212, #6145, #92, #7202, #1103, #8230, #2110, #9245, #3117, #10250, #4129, #11274, #5152, #12256, #6194 ), + ( #140, #7244, #1149, #8276, #2150, #9284, #3166, #10293, #4173, #11319, #5198, #12297, #6236, #186, #7292, #1189, #8320, #2192, #9328, #3206, #10343, #4219, #11360, #5241, #12340, #6282, #233, #7338, #1236, #8360 ), + ( #2238, #9377, #3251, #10387, #4263, #11409, #5290, #12382, #6330, #276, #7383, #1281, #8415, #2277, #9427, #3301, #10432, #4307, #11458, #5338, #12425, #6375, #327, #7431, #1325, #8461, #2323, #9468, #3344, #10477 ), + ( #4347, #11497, #5390, #12466, #6421, #375, #7478, #1365, #8503, #2365, #9506, #3382, #10521, #4390, #11538, #5431, #12507, #6464, #412, #7518, #1412, #8543, #2403, #9553, #3423, #10557, #4436, #11580, #5474, #12549 ), + ( #6511, #448, #7561, #1451, #8587, #2437, #9593, #3466, #10598, #4473, #11623, #5517, #12583, #6551, #496, #7600, #1488, #8630, #2487, #9630, #3506, #10639, #4512, #11663, #5564, #12624, #6595, #533, #7644, #1529 ), + ( #8672, #2532, #9675, #3547, #10681, #4560, #11703, #5602, #12669, #6646, #568, #7684, #1580, #8711, #2576, #9715, #3595, #10720, #4605, #11742, #5648, #12706, #6689, #612, #7728, #1618, #8757, #2615, #9755, #3643 ), + ( #10767, #4645, #11782, #5694, #12744, #6733, #659, #7772, #1660, #8797, #2664, #9797, #3679, #10809, #4696, #11823, #5737, #12782, #6775, #698, #7818, #1702, #8837, #2708, #9843, #3712, #10852, #4742, #11864, #5774 ), + ( #12823, #6823, #740, #7860, #1747, #8879, #2749, #9884, #3756, #10892, #4787, #11906, #5820, #12865, #6868, #785, #7903, #1785, #8926, #2794, #9926, #3800, #10941, #4828, #11948, #5866, #12902, #6907, #827, #7951 ), + ( #1826, #8965, #2842, #9971, #3843, #10988, #4875, #11985, #5905, #12938, #6955, #865, #7996, #1875, #9008, #2887, #10020, #3890, #11030, #4923, #12030, #5949, #12984, #7008, #913, #8035, #1918, #9057, #2928, #10056 ), + ( #3932, #11078, #4963, #12071, #5998, #13022, #7055, #961, #8081, #1959, #9098, #2976, #10100, #3976, #11127, #5008, #12110, #6042, #13067, #7093, #1002, #8126, #2004, #9142, #3021, #10147, #4017, #11171, #5059, #12153 ), + ( #6085, #33, #7141, #1042, #8168, #2054, #9183, #3064, #10196, #4067, #11212, #5100, #12198, #6130, #78, #7189, #1088, #8213, #2097, #9231, #3103, #10239, #4116, #11259, #5138, #12245, #6181, #126, #7232, #1137 ), + ( #8264, #2136, #9273, #3152, #10281, #4162, #11306, #5184, #12284, #6224, #173, #7277, #1178, #8309, #2179, #9314, #3196, #10328, #4205, #11347, #5230, #12326, #6266, #219, #7326, #1221, #8349, #2222, #9361, #3235 ), + ( #10372, #4251, #11395, #5275, #12368, #6315, #262, #7369, #1267, #8395, #2269, #9411, #3286, #10416, #4292, #11443, #5322, #12410, #6359, #310, #7414, #1309, #8448, #2307, #9451, #3329, #10462, #4332, #11484, #5375 ), + ( #12451, #6407, #362, #7462, #1352, #8492, #2353, #9494, #3371, #10510, #4375, #11524, #5420, #12498, #6450, #402, #7505, #1397, #8530, #2391, #9539, #3410, #10545, #4423, #11568, #5461, #12536, #6499, #436, #7550 ), + ( #1436, #8572, #2427, #9579, #3453, #10585, #4460, #11609, #5503, #12570, #6539, #482, #7588, #1476, #8616, #2472, #9618, #3492, #10627, #4499, #11651, #5547, #12610, #6581, #520, #7629, #1515, #8656, #2517, #9660 ), + ( #3533, #10666, #4545, #11688, #5588, #12655, #6628, #555, #7672, #1563, #8698, #2560, #9703, #3579, #10705, #4590, #11731, #5632, #12691, #6673, #596, #7712, #1606, #8744, #2602, #9744, #3625, #10751, #4631, #11770 ), + ( #5678, #12730, #6719, #644, #7754, #1643, #8785, #2649, #9781, #3667, #10797, #4678, #11807, #5724, #12769, #6761, #685, #7804, #1687, #8826, #2693, #9829, #3702, #10840, #4726, #11848, #5762, #12811, #6807, #725 ), + ( #7849, #1729, #8862, #2736, #9871, #3743, #10875, #4772, #11891, #5806, #12849, #6855, #771, #7888, #1772, #8910, #2778, #9912, #3786, #10925, #4815, #11936, #5850, #12888, #6895, #813, #7935, #1810, #8951, #2826 ), + ( #9956, #3830, #10974, #4861, #11970, #5894, #12928, #6939, #852, #7981, #1861, #8992, #2872, #10004, #3873, #11015, #4907, #12015, #5934, #12967, #6989, #896, #8022, #1907, #9042, #2915, #10046, #3918, #11061, #4950 ), + ( #12055, #5981, #13009, #7037, #945, #8064, #3912, #11053, #4944, #12048, #5972, #13003, #7031, #938, #8056, #1940, #9078, #2952, #10076, #3954, #11103, #4984, #12091, #6020, #13043, #7074, #983, #8102, #1983, #9120 ), + ( #3000, #10122, #3996, #11148, #5034, #12132, #6066, #13, #7118, #1022, #8148, #2029, #9160, #3044, #10175, #4041, #11191, #5079, #12178, #6107, #58, #7167, #1066, #8190, #2075, #9208, #3083, #10216, #4092, #11235 ), + ( #5120, #12220, #6156, #101, #7211, #1114, #8240, #2119, #9253, #3126, #10257, #4141, #11284, #5160, #12264, #6201, #148, #7252, #1158, #8287, #2159, #9292, #3174, #10302, #4179, #11326, #5209, #12305, #6244, #194 ), + ( #7302, #1195, #8328, #2200, #9334, #3216, #10349, #4225, #11367, #5251, #12348, #6290, #241, #7346, #1245, #8368, #2247, #9389, #3260, #10394, #4272, #11419, #5298, #12388, #6341, #285, #7393, #1286, #8426, #2284 ), + ( #9432, #3312, #10441, #4314, #11465, #5350, #12432, #6385, #338, #7440, #1331, #8471, #2333, #9474, #3351, #10487, #4355, #11504, #5397, #12476, #6430, #382, #7487, #1375, #8511, #2372, #9517, #3390, #10528, #4402 ), + ( #11546, #5440, #12515, #6475, #420, #7527, #1422, #8552, #2410, #9560, #3433, #10564, #4444, #11588, #5482, #12554, #6518, #457, #7566, #1456, #8599, #2446, #9599, #3475, #10608, #4480, #11630, #5526, #12590, #6559 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 4, 2, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 1, 1, 2, 4 ), + ( 0.0000000000000000000, 0.01578396089731797700, 0.03156792179463595300, 0.06313584358927190600, 0.1262716871785438100, 0.1894075307678157200, 0.2209754525624516600, 0.2525433743570876200, 0.2602714244843017900, 0.3143677753748009300, 0.3761921763925142300, 0.4380165774102274800, 0.4689287779190841600, 0.4998409784279407900, 0.5311350223018708200, 0.5624290661758008000, 0.6250171539236608600, 0.6876052416715209300, 0.7188992855454510200, 0.7501933294193809900, 0.7814191632419583700, 0.8126449970645357500, 0.8750966647096905000, 0.9375483323548452500, 0.9687741661774226200, 1.000000000000000000 ), + ( 0.0000000000000000000, 0.001953125000000000000, 0.03125000000000000000, 0.06250000000000000000, 0.1250000000000000000, 0.2500000000000000000, 0.3750000000000000000, 0.4375000000000000000, 0.5000000000000000000, 0.5625000000000000000, 0.6250000000000000000, 0.7500000000000000000, 0.8750000000000000000, 0.9375000000000000000, 0.9687500000000000000, 0.9980468750000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#7296 = ORIENTED_EDGE ( 'NONE', *, *, #10166, .T. ) ; +#7297 = CARTESIAN_POINT ( 'NONE', ( 38.74251141862145400, -30.70477496373638400, 22.09966525513864600 ) ) ; +#7298 = CARTESIAN_POINT ( 'NONE', ( 10.11423849738465600, -13.36407974370885700, -25.00000000000002800 ) ) ; +#7299 = CARTESIAN_POINT ( 'NONE', ( 34.96779545965576100, -20.32149963875693600, -23.67186603788613300 ) ) ; +#7300 = CARTESIAN_POINT ( 'NONE', ( 7.088762120015824000, -30.85092083483586500, 23.78709456688433500 ) ) ; +#7301 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000015100, -27.09143239524033200, 6.754920151478379400 ) ) ; +#7302 = CARTESIAN_POINT ( 'NONE', ( 31.44022421983833100, -30.78692346127125400, 27.88359221426523900 ) ) ; +#7303 = CARTESIAN_POINT ( 'NONE', ( 11.82906477741243700, -30.64916707603219600, 27.28905690278346800 ) ) ; +#7304 = AXIS2_PLACEMENT_3D ( 'NONE', #12599, #12560, #486 ) ; +#7305 = CARTESIAN_POINT ( 'NONE', ( 26.03660367210345700, -19.05823758389867000, 23.40278831629126400 ) ) ; +#7306 = CARTESIAN_POINT ( 'NONE', ( 39.68117208216111900, -29.25008946584678100, 21.75894233788155000 ) ) ; +#7307 = ORIENTED_EDGE ( 'NONE', *, *, #12450, .T. ) ; +#7308 = CARTESIAN_POINT ( 'NONE', ( 44.92224777120616600, 10.13028869250944000, 18.21135650822973100 ) ) ; +#7309 = CARTESIAN_POINT ( 'NONE', ( 4.128183752734164700, -17.92947436395843000, -14.32052312011623100 ) ) ; +#7310 = ORIENTED_EDGE ( 'NONE', *, *, #7026, .T. ) ; +#7311 = CARTESIAN_POINT ( 'NONE', ( 44.34719698635368000, -10.31502033010014000, 12.47082325052850700 ) ) ; +#7312 = CARTESIAN_POINT ( 'NONE', ( 33.75375876745273700, -12.60588290921852600, -25.11716070634125900 ) ) ; +#7313 = CARTESIAN_POINT ( 'NONE', ( 19.93128880648469800, -19.87468203992591100, 23.25870727517079200 ) ) ; +#7314 = CARTESIAN_POINT ( 'NONE', ( 10.54210758633524700, -30.65292919017838000, 26.69778413425883600 ) ) ; +#7315 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000001400, -94.74682992296695300, 18.71443453778785600 ) ) ; +#7316 = CARTESIAN_POINT ( 'NONE', ( 37.45581578318611800, -9.776237646588981500, 24.05182844300122400 ) ) ; +#7317 = CARTESIAN_POINT ( 'NONE', ( 5.378501939610872600, -30.24177118370096900, 21.81247104932712200 ) ) ; +#7318 = CARTESIAN_POINT ( 'NONE', ( 10.13405053905432300, -12.91867775725953400, -25.00000000000000400 ) ) ; +#7319 = CARTESIAN_POINT ( 'NONE', ( 36.90471616772751400, -30.42978017812901800, 25.23837206929546500 ) ) ; +#7320 = ORIENTED_EDGE ( 'NONE', *, *, #11798, .T. ) ; +#7321 = DATE_AND_TIME ( #10005, #12641 ) ; +#7322 = CARTESIAN_POINT ( 'NONE', ( 26.96078461327810800, -19.13732491596344700, 23.29120294301071700 ) ) ; +#7323 = ADVANCED_FACE ( 'NONE', ( #11339 ), #541, .T. ) ; +#7324 = VERTEX_POINT ( 'NONE', #2342 ) ; +#7325 = EDGE_CURVE ( 'NONE', #742, #7281, #6238, .T. ) ; +#7326 = CARTESIAN_POINT ( 'NONE', ( 33.74981241184121900, -31.00113965477133200, 26.92619985713530500 ) ) ; +#7327 = CARTESIAN_POINT ( 'NONE', ( 39.97827195408304100, -27.76489309049838600, 11.31702220402204000 ) ) ; +#7328 = CARTESIAN_POINT ( 'NONE', ( 4.635018781132121300, -11.86704017248597200, 19.40309482547837300 ) ) ; +#7329 = CARTESIAN_POINT ( 'NONE', ( 10.17278707570930000, -12.47585493740279900, -25.00000000000001400 ) ) ; +#7330 = CARTESIAN_POINT ( 'NONE', ( 8.650967030676820700, -30.34865751794724900, 25.63326749502420300 ) ) ; +#7331 = CARTESIAN_POINT ( 'NONE', ( 28.90889732659356100, -10.00000000000000000, -31.49758651677716500 ) ) ; +#7332 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -4.964026630529101400, 16.11032006443789700 ) ) ; +#7333 = CARTESIAN_POINT ( 'NONE', ( 38.74309991432596700, -97.42196504633055600, 18.37393771276376200 ) ) ; +#7334 = ADVANCED_FACE ( 'NONE', ( #3824 ), #8659, .T. ) ; +#7335 = CARTESIAN_POINT ( 'NONE', ( 38.48558651930166300, -30.43956887043383100, 23.64926785278305800 ) ) ; +#7336 = LINE ( 'NONE', #6747, #9705 ) ; +#7337 = EDGE_LOOP ( 'NONE', ( #11705, #12158, #780, #943 ) ) ; +#7338 = CARTESIAN_POINT ( 'NONE', ( 35.66423568070874200, -31.16697492879027100, 25.65005962882276000 ) ) ; +#7339 = CARTESIAN_POINT ( 'NONE', ( 15.23336292262429300, -97.50632099824231600, 21.67706925112959800 ) ) ; +#7340 = EDGE_CURVE ( 'NONE', #7281, #7655, #3848, .T. ) ; +#7341 = CARTESIAN_POINT ( 'NONE', ( 30.69654051329134600, -95.07596123493894400, 17.19136527822275100 ) ) ; +#7342 = CARTESIAN_POINT ( 'NONE', ( 10.29483407768045400, -11.82033521114684800, -25.00000000000000700 ) ) ; +#7343 = CARTESIAN_POINT ( 'NONE', ( 27.77285999918182200, -33.32768944524525500, 28.33792997631858800 ) ) ; +#7344 = CARTESIAN_POINT ( 'NONE', ( 6.844784339936778000, -29.81592391720229100, 24.17754163638510800 ) ) ; +#7345 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000015100, -27.09143239524032500, 6.754920151478383000 ) ) ; +#7346 = CARTESIAN_POINT ( 'NONE', ( 31.43940148357109300, -30.81377906419646700, 27.87929434774711600 ) ) ; +#7347 = CARTESIAN_POINT ( 'NONE', ( 43.55412863952034300, -8.564973339989123200, -20.86462657482905000 ) ) ; +#7348 = CARTESIAN_POINT ( 'NONE', ( 12.13861248665301300, -30.98144313546366000, 27.33234541547954800 ) ) ; +#7349 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999932500, -5.310695273384626900, -19.38014166826951300 ) ) ; +#7350 = CARTESIAN_POINT ( 'NONE', ( 39.37527991251571500, -30.37642290199699600, 21.56015515970731000 ) ) ; +#7351 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #7274, #7280, #7675 ), + ( #12930, #12891, #7207 ), + ( #7194, #7161, #7144 ), + ( #7114, #7058, #7013 ), + ( #6994, #6911, #6897 ), + ( #6872, #6858, #6810 ), + ( #6779, #6764, #6737 ), + ( #6724, #6694, #6678 ), + ( #6648, #6634, #6585 ), + ( #6554, #6543, #6514 ), + ( #6503, #6492, #6470 ), + ( #6425, #6410, #6402 ), + ( #6380, #6363, #6354 ), + ( #6336, #6272, #6240 ), + ( #6218, #6197, #6174 ), + ( #6132, #6089, #6061 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.002226100544389964100, 0.004452201088779928100, 0.005565251360974909900, 0.006678301633169892600, 0.008904402177559856200, 0.01335660326633978500, 0.01780880435511971200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7244825415840787700, 1.000000000000000000), + ( 1.000000000000000000, 0.7419772105793434000, 1.000000000000000000), + ( 1.000000000000000000, 0.7769715623863073800, 1.000000000000000000), + ( 1.000000000000000000, 0.7944760416282452600, 1.000000000000000000), + ( 1.000000000000000000, 0.8203989626029242200, 1.000000000000000000), + ( 1.000000000000000000, 0.8289841048678930900, 1.000000000000000000), + ( 1.000000000000000000, 0.8457553974923984800, 1.000000000000000000), + ( 1.000000000000000000, 0.8539697634099642200, 1.000000000000000000), + ( 1.000000000000000000, 0.8780002341403119200, 1.000000000000000000), + ( 1.000000000000000000, 0.8932073966714007000, 1.000000000000000000), + ( 1.000000000000000000, 0.9354213354547943300, 1.000000000000000000), + ( 1.000000000000000000, 0.9589939734612613600, 1.000000000000000000), + ( 1.000000000000000000, 0.9913592356950560200, 1.000000000000000000), + ( 1.000000000000000000, 1.000064721039574100, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#7352 = CARTESIAN_POINT ( 'NONE', ( 10.57495937070198600, -19.32192852287202100, 20.02018352160554200 ) ) ; +#7353 = CARTESIAN_POINT ( 'NONE', ( 19.16691576264560500, -12.49999999999999600, 22.05918254822886100 ) ) ; +#7354 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -97.53410728581272300, 14.05303623855330900 ) ) ; +#7355 = CARTESIAN_POINT ( 'NONE', ( 6.050532363161184300, -28.87042587369011700, 21.75716330061473200 ) ) ; +#7356 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000032000, -27.07571732632036200, 6.665795566818517600 ) ) ; +#7357 = CARTESIAN_POINT ( 'NONE', ( 10.58906028813486500, -30.08386038948887600, 26.70546375443427300 ) ) ; +#7358 = CARTESIAN_POINT ( 'NONE', ( 26.53263660096975600, -30.69526449500076000, 28.85086649663350800 ) ) ; +#7359 = CARTESIAN_POINT ( 'NONE', ( 0.3556026458966747800, -7.370430707509120400, -19.58164564657501200 ) ) ; +#7360 = CARTESIAN_POINT ( 'NONE', ( 38.48363479062653900, -9.764518501569890300, 28.20265226273582100 ) ) ; +#7361 = LINE ( 'NONE', #11640, #6702 ) ; +#7362 = CARTESIAN_POINT ( 'NONE', ( 5.685192760259402800, -29.09619797075100300, 22.01606134017176300 ) ) ; +#7363 = CARTESIAN_POINT ( 'NONE', ( 5.059088619486654900, -26.01456659993046500, 8.508417249749543400 ) ) ; +#7364 = CARTESIAN_POINT ( 'NONE', ( 10.34691791003465300, -11.60189505174918900, -25.00000000000000000 ) ) ; +#7365 = CARTESIAN_POINT ( 'NONE', ( 36.65124616077089600, -31.14606493946012500, 24.80504045059718600 ) ) ; +#7366 = CARTESIAN_POINT ( 'NONE', ( 12.67828621111028500, -100.0000000000000100, 4.226339706232137900 ) ) ; +#7367 = CARTESIAN_POINT ( 'NONE', ( 31.29491887022134500, -19.21190407622846400, 21.97009432444826900 ) ) ; +#7368 = EDGE_CURVE ( 'NONE', #5151, #8261, #5904, .T. ) ; +#7369 = CARTESIAN_POINT ( 'NONE', ( 33.56094846463764700, -30.43626902706850500, 27.13569422075625000 ) ) ; +#7370 = CARTESIAN_POINT ( 'NONE', ( 25.10306456692114100, -19.87568216611860800, 23.25829123793067100 ) ) ; +#7371 = CARTESIAN_POINT ( 'NONE', ( 9.061018263309772900, -19.40293382129467000, 18.58483821412520200 ) ) ; +#7372 = CARTESIAN_POINT ( 'NONE', ( 10.48333248593735700, -11.17784875847207700, -25.00000000000000400 ) ) ; +#7373 = CARTESIAN_POINT ( 'NONE', ( 12.13306038041906400, -30.58887098450855300, 27.41614179948587100 ) ) ; +#7374 = CARTESIAN_POINT ( 'NONE', ( 8.832485490412675900, -29.58409806672867900, 25.51656267764611700 ) ) ; +#7375 = CARTESIAN_POINT ( 'NONE', ( 34.42504062929798900, -20.67807147712778400, -23.54672313577468000 ) ) ; +#7376 = CARTESIAN_POINT ( 'NONE', ( 0.5279710254811144100, -11.05585776254131300, -11.50960060653939900 ) ) ; +#7377 = CARTESIAN_POINT ( 'NONE', ( 40.37841123684236100, -10.17073209984932300, 22.91087491801813800 ) ) ; +#7378 = CARTESIAN_POINT ( 'NONE', ( 2.657298096966142600, -9.285963918054823900, -23.69252011645909300 ) ) ; +#7379 = CARTESIAN_POINT ( 'NONE', ( 37.95519614610724100, -29.13194597913138400, 23.69671309600535000 ) ) ; +#7380 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -95.07596123493894400, 11.50239124669685100 ) ) ; +#7381 = FACE_OUTER_BOUND ( 'NONE', #3303, .T. ) ; +#7382 = AXIS2_PLACEMENT_3D ( 'NONE', #7985, #1429, #1549 ) ; +#7383 = CARTESIAN_POINT ( 'NONE', ( 35.60067736958045300, -30.27043204286482900, 26.11104755731301800 ) ) ; +#7384 = CARTESIAN_POINT ( 'NONE', ( 18.64443273699628600, -33.31992328562390800, 26.50879855998184100 ) ) ; +#7385 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 1, ( + ( #6212, #3140 ), + ( #159, #7267 ), + ( #1168, #8298 ), + ( #2169, #9304 ), + ( #3184, #10315 ), + ( #4193, #11337 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 4, 2, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 0.1250000000000000600, 0.1792476661914394200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#7386 = CARTESIAN_POINT ( 'NONE', ( 33.55336076518094000, -94.71799171676333600, 17.16806718887048400 ) ) ; +#7387 = VERTEX_POINT ( 'NONE', #8105 ) ; +#7388 = CARTESIAN_POINT ( 'NONE', ( 10.56726869135707300, -10.97254818939265100, -25.00000000000000000 ) ) ; +#7389 = CARTESIAN_POINT ( 'NONE', ( 29.48317979267968200, -31.87373873857588400, 20.46251347879439900 ) ) ; +#7390 = ADVANCED_FACE ( 'NONE', ( #2886 ), #5591, .T. ) ; +#7391 = CARTESIAN_POINT ( 'NONE', ( 7.331028252554873800, -31.02535923589598400, 23.73079455858162100 ) ) ; +#7392 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000015100, -27.09143239524032200, 6.754920151478385600 ) ) ; +#7393 = CARTESIAN_POINT ( 'NONE', ( 31.44018623400512200, -30.84451425652431300, 27.87345952607151000 ) ) ; +#7394 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #3246, #3377, #5426, #12503 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.570796326794896800, 3.141592653589793100 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243650500, 0.8047378541243650500, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#7395 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -5.000000000000000900, -23.00000000000000000 ) ) ; +#7396 = CIRCLE ( 'NONE', #1411, 1.200000000000003100 ) ; +#7397 = CARTESIAN_POINT ( 'NONE', ( 41.33745915556497200, -11.30375886483554200, 18.49395092046455600 ) ) ; +#7398 = CARTESIAN_POINT ( 'NONE', ( 39.12007832649666700, -28.96328793616439500, 21.87194190679193900 ) ) ; +#7399 = CARTESIAN_POINT ( 'NONE', ( 8.376470005285137100, -19.44796692962999200, 17.78688966027733900 ) ) ; +#7400 = CARTESIAN_POINT ( 'NONE', ( 18.34818654855864800, -12.49999999999999600, 21.97520184346871700 ) ) ; +#7401 = DIRECTION ( 'NONE', ( 0.2103059029587072400, 0.0000000000000000000, 0.9776356310920355500 ) ) ; +#7402 = CARTESIAN_POINT ( 'NONE', ( 20.02044429397661000, -30.66267915277542900, 28.85661217164344800 ) ) ; +#7403 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -99.99999999999998600, 21.63057173623876000 ) ) ; +#7404 = CARTESIAN_POINT ( 'NONE', ( 0.8080492859146232200, -8.702991269382232900, -19.21916412861782000 ) ) ; +#7405 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, -5.000000000000023100, -19.35342349036129800 ) ) ; +#7406 = CARTESIAN_POINT ( 'NONE', ( 29.58852257376300800, -95.07596123493894400, 15.95758058754438700 ) ) ; +#7407 = CARTESIAN_POINT ( 'NONE', ( 5.985655136693218900, -30.57898538882181000, 21.92344003252066300 ) ) ; +#7408 = VECTOR ( 'NONE', #5919, 1000.000000000000000 ) ; +#7409 = CARTESIAN_POINT ( 'NONE', ( 5.003808057916790700, -27.43147359582430800, 9.040386619199008300 ) ) ; +#7410 = CARTESIAN_POINT ( 'NONE', ( 10.78262327790386800, -10.58224104854866900, -25.00000000000000000 ) ) ; +#7411 = CARTESIAN_POINT ( 'NONE', ( 36.71101153575506300, -30.22651775494673400, 25.39421325831826000 ) ) ; +#7412 = CARTESIAN_POINT ( 'NONE', ( 7.579444058923996000, -100.0000000000000100, -4.444869195815399200 ) ) ; +#7413 = CARTESIAN_POINT ( 'NONE', ( 34.88088300446860800, -19.34615682629936400, 19.59130684520165700 ) ) ; +#7414 = CARTESIAN_POINT ( 'NONE', ( 33.56647049206603100, -30.83045981338305100, 27.07879131848872200 ) ) ; +#7415 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -95.78492122984182800, 4.330314668850237000 ) ) ; +#7416 = CARTESIAN_POINT ( 'NONE', ( 44.90291286365120300, 10.18993461597465700, 17.86050372698884200 ) ) ; +#7417 = ORIENTED_EDGE ( 'NONE', *, *, #12947, .F. ) ; +#7418 = VERTEX_POINT ( 'NONE', #5038 ) ; +#7419 = CARTESIAN_POINT ( 'NONE', ( 38.74607507694194200, -30.70291383821285400, 22.09186228311617100 ) ) ; +#7420 = CARTESIAN_POINT ( 'NONE', ( 12.33747609640806300, -30.94612908617781600, 27.42424231138705400 ) ) ; +#7421 = CARTESIAN_POINT ( 'NONE', ( 8.837520858362319500, -30.57006436567610300, 25.71280414944170500 ) ) ; +#7422 = EDGE_CURVE ( 'NONE', #10945, #8780, #8338, .T. ) ; +#7423 = CARTESIAN_POINT ( 'NONE', ( 2.602085213965210600E-015, -8.815369576714834600, -11.85782848515795800 ) ) ; +#7424 = CARTESIAN_POINT ( 'NONE', ( 34.51769209210174700, -10.24957398907666600, 25.00000000000000000 ) ) ; +#7425 = CARTESIAN_POINT ( 'NONE', ( 24.92572295890073500, -33.35320608433639200, 26.50719968128653300 ) ) ; +#7426 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8743, #851, #7711, #595 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001330694774643880000 ), + .UNSPECIFIED. ) ; +#7427 = CARTESIAN_POINT ( 'NONE', ( 38.48615353964195400, -30.15791619662332200, 23.86502429750529700 ) ) ; +#7428 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2577, #8712, #7730, #1619 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.005000000000000004400 ), + .UNSPECIFIED. ) ; +#7429 = CARTESIAN_POINT ( 'NONE', ( 0.0008882578210016312000, -95.07596123493894400, -4.542352223618777000 ) ) ; +#7430 = ORIENTED_EDGE ( 'NONE', *, *, #10509, .T. ) ; +#7431 = CARTESIAN_POINT ( 'NONE', ( 35.53685060117532400, -31.01614358513246800, 25.88007766788847500 ) ) ; +#7432 = CARTESIAN_POINT ( 'NONE', ( 8.506143116333861400, -31.61666448941052800, 23.26783839800555100 ) ) ; +#7433 = CIRCLE ( 'NONE', #8080, 2.500000000000000000 ) ; +#7434 = CARTESIAN_POINT ( 'NONE', ( 37.56601571360487000, -95.07596123493894400, 12.88244847305894000 ) ) ; +#7435 = CARTESIAN_POINT ( 'NONE', ( 38.75138607558447000, -30.70012643060886500, 22.08018260893288000 ) ) ; +#7436 = CARTESIAN_POINT ( 'NONE', ( 10.91485125103847800, -10.39835501504706800, -25.00000000000000400 ) ) ; +#7437 = CARTESIAN_POINT ( 'NONE', ( 31.95639236843879500, -38.52588166476719800, 18.24312058641583100 ) ) ; +#7438 = CARTESIAN_POINT ( 'NONE', ( 6.873189966688901400, -30.13676218149190000, 24.28964125216503300 ) ) ; +#7439 = CARTESIAN_POINT ( 'NONE', ( 41.04997886935265700, -17.89932274863402000, -11.51471024720430800 ) ) ; +#7440 = CARTESIAN_POINT ( 'NONE', ( 31.33681243430855200, -30.81569756163735000, 27.90980135030938700 ) ) ; +#7441 = CARTESIAN_POINT ( 'NONE', ( 14.91000609405280900, -32.99230289635512000, 25.93312472157429500 ) ) ; +#7442 = CARTESIAN_POINT ( 'NONE', ( 39.88778050611377100, -30.00494213986675600, 21.68916449285667600 ) ) ; +#7443 = ORIENTED_EDGE ( 'NONE', *, *, #10166, .F. ) ; +#7444 = CARTESIAN_POINT ( 'NONE', ( 44.90287534330132500, 10.19006527892302000, 17.14065433413488300 ) ) ; +#7445 = CARTESIAN_POINT ( 'NONE', ( 5.240068917806704400, -22.65785290322541100, -14.77370976521210200 ) ) ; +#7446 = EDGE_LOOP ( 'NONE', ( #4361, #4679 ) ) ; +#7447 = CARTESIAN_POINT ( 'NONE', ( 18.75950190396263700, -93.17319108806721300, 22.83432233962168600 ) ) ; +#7448 = EDGE_CURVE ( 'NONE', #3358, #5151, #1525, .T. ) ; +#7449 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000004400, -100.0000000000000100, -26.47095103470434600 ) ) ; +#7450 = CARTESIAN_POINT ( 'NONE', ( 35.17282258055105600, -94.72975613659637900, 16.45072930267862800 ) ) ; +#7451 = CARTESIAN_POINT ( 'NONE', ( 0.1463310510053634500, -6.227560509982777300, 16.97198332379452500 ) ) ; +#7452 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -6.938893903907222500E-016, 1.000000000000000000 ) ) ; +#7453 = ORIENTED_EDGE ( 'NONE', *, *, #8638, .T. ) ; +#7454 = CARTESIAN_POINT ( 'NONE', ( 5.228829537312379600, -29.51024227004580800, 22.09293722180774500 ) ) ; +#7455 = CARTESIAN_POINT ( 'NONE', ( 5.090528255188764300, -26.72171741374042100, 8.782085645847356400 ) ) ; +#7456 = CARTESIAN_POINT ( 'NONE', ( 36.51904801098060500, -31.10424850085723100, 24.99573990473064800 ) ) ; +#7457 = ORIENTED_EDGE ( 'NONE', *, *, #2646, .F. ) ; +#7458 = VERTEX_POINT ( 'NONE', #7214 ) ; +#7459 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999613500, -94.86643714416439400, 13.78227732442169900 ) ) ; +#7460 = CARTESIAN_POINT ( 'NONE', ( 37.48804743589327900, -19.51902213893171000, 16.52789438695241800 ) ) ; +#7461 = ADVANCED_FACE ( 'NONE', ( #232 ), #12983, .T. ) ; +#7462 = CARTESIAN_POINT ( 'NONE', ( 33.45270587801434200, -30.33466683881270500, 27.17661622419550900 ) ) ; +#7463 = ORIENTED_EDGE ( 'NONE', *, *, #10116, .T. ) ; +#7464 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.57596123493894400, 10.85284821673504900 ) ) ; +#7465 = CARTESIAN_POINT ( 'NONE', ( 44.92214158203961500, 10.13070237256533300, 16.79023454383173300 ) ) ; +#7466 = CARTESIAN_POINT ( 'NONE', ( 38.76353742550264100, -30.69365296812466300, 22.05310396261973300 ) ) ; +#7467 = CARTESIAN_POINT ( 'NONE', ( 11.22711264029113700, -10.08189443632953600, -25.00000000000000400 ) ) ; +#7468 = CARTESIAN_POINT ( 'NONE', ( 12.33299194550773800, -30.70945462971614500, 27.47977999278699800 ) ) ; +#7469 = ORIENTED_EDGE ( 'NONE', *, *, #10116, .F. ) ; +#7470 = CARTESIAN_POINT ( 'NONE', ( 8.977144151856176500, -29.68880624224250300, 25.66752279395339900 ) ) ; +#7471 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7472 = CARTESIAN_POINT ( 'NONE', ( 33.83021061767630800, -12.06892683715092000, 25.00000000000000000 ) ) ; +#7473 = CARTESIAN_POINT ( 'NONE', ( 23.28953345456521300, -27.93256442298464000, 27.46300505893208000 ) ) ; +#7474 = EDGE_CURVE ( 'NONE', #5370, #4951, #3205, .T. ) ; +#7475 = ADVANCED_FACE ( 'NONE', ( #8014 ), #4942, .F. ) ; +#7476 = CARTESIAN_POINT ( 'NONE', ( 37.95401596273654800, -30.96935882837955800, 23.37203355369679200 ) ) ; +#7477 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9511, #12509, #6468, #414 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002585045885579686200 ), + .UNSPECIFIED. ) ; +#7478 = CARTESIAN_POINT ( 'NONE', ( 35.44696882412841200, -29.96565928183944600, 26.12718265462534700 ) ) ; +#7479 = VERTEX_POINT ( 'NONE', #5046 ) ; +#7480 = ORIENTED_EDGE ( 'NONE', *, *, #9649, .T. ) ; +#7481 = CARTESIAN_POINT ( 'NONE', ( 38.78687972959134100, -30.68083217260299400, 21.99964584234203400 ) ) ; +#7482 = CARTESIAN_POINT ( 'NONE', ( 7.579484036836335600, -100.0000000000000300, -27.29038152329702500 ) ) ; +#7483 = CARTESIAN_POINT ( 'NONE', ( 38.29525908243685700, -31.00544597193818000, 22.72000988592940000 ) ) ; +#7484 = ORIENTED_EDGE ( 'NONE', *, *, #12299, .T. ) ; +#7485 = CARTESIAN_POINT ( 'NONE', ( 7.332069081885223700, -29.19950343605999200, 24.05183203623488100 ) ) ; +#7486 = CARTESIAN_POINT ( 'NONE', ( 39.98673714399438200, -22.30567774256016400, -11.28212122293866700 ) ) ; +#7487 = CARTESIAN_POINT ( 'NONE', ( 31.33692928748958600, -30.83073651757414500, 27.90711554070712100 ) ) ; +#7488 = CARTESIAN_POINT ( 'NONE', ( 7.914827474892390100, -29.60191644253906100, 25.49823838288919800 ) ) ; +#7489 = CARTESIAN_POINT ( 'NONE', ( 38.89759399038677400, -28.89901337299961200, 22.00245591532406300 ) ) ; +#7490 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 9.500000000000000000, 15.51856112887630200 ) ) ; +#7491 = DIRECTION ( 'NONE', ( -0.8210641649044792000, 0.0000000000000000000, -0.5708359108445353300 ) ) ; +#7492 = ORIENTED_EDGE ( 'NONE', *, *, #13034, .F. ) ; +#7493 = VECTOR ( 'NONE', #5852, 1000.000000000000000 ) ; +#7494 = CARTESIAN_POINT ( 'NONE', ( 20.15009222793004900, -33.18274856558007700, 28.41225594090786500 ) ) ; +#7495 = CARTESIAN_POINT ( 'NONE', ( 12.31234150544428900, -97.48839365140189300, 20.97473870223352000 ) ) ; +#7496 = FACE_OUTER_BOUND ( 'NONE', #306, .T. ) ; +#7497 = CARTESIAN_POINT ( 'NONE', ( 27.72508381850705200, -18.16896278583981300, -26.44040854354688700 ) ) ; +#7498 = CARTESIAN_POINT ( 'NONE', ( 11.32683821948212700, -13.06511437860763500, 24.45953763609403700 ) ) ; +#7499 = CARTESIAN_POINT ( 'NONE', ( 6.217133836960480100, -30.68407488164255200, 22.01647704382737900 ) ) ; +#7500 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000016000, -27.36074002515479400, 8.074055433637369100 ) ) ; +#7501 = CARTESIAN_POINT ( 'NONE', ( 11.41118663482454700, -9.946730011451595700, -25.00000000000000400 ) ) ; +#7502 = CARTESIAN_POINT ( 'NONE', ( 36.37160841565604800, -29.92813504869766900, 25.55216801465613600 ) ) ; +#7503 = CARTESIAN_POINT ( 'NONE', ( 38.87650451363043700, -19.67030868405083800, 13.84720404561129000 ) ) ; +#7504 = AXIS2_PLACEMENT_3D ( 'NONE', #2158, #2118, #2074 ) ; +#7505 = CARTESIAN_POINT ( 'NONE', ( 33.47086821068103300, -30.71775635227225700, 27.15072101775987100 ) ) ; +#7506 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#7507 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.819660112500978100, -11.53187062879840900 ) ) ; +#7508 = LINE ( 'NONE', #10641, #7817 ) ; +#7509 = CARTESIAN_POINT ( 'NONE', ( 38.82975083022716200, -30.65572822892495700, 21.89555319536364700 ) ) ; +#7510 = CARTESIAN_POINT ( 'NONE', ( 11.80383457172161800, -9.743650733750028400, -25.00000000000000000 ) ) ; +#7511 = ORIENTED_EDGE ( 'NONE', *, *, #11193, .T. ) ; +#7512 = CARTESIAN_POINT ( 'NONE', ( 12.74083688717374800, -30.92263237288294100, 27.58356118625910700 ) ) ; +#7513 = CARTESIAN_POINT ( 'NONE', ( 8.978619962718624900, -30.86844097093951000, 25.64812667668460100 ) ) ; +#7514 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7515 = CARTESIAN_POINT ( 'NONE', ( 34.23629136916074600, -12.34547223009419300, 24.58643465046051100 ) ) ; +#7516 = CARTESIAN_POINT ( 'NONE', ( 38.27687437101784000, -29.92038589677504500, 24.09468764408648100 ) ) ; +#7517 = CIRCLE ( 'NONE', #5352, 1.200000000000006600 ) ; +#7518 = CARTESIAN_POINT ( 'NONE', ( 35.50728194840764500, -30.72933932885013800, 26.08793673781896100 ) ) ; +#7519 = CARTESIAN_POINT ( 'NONE', ( 37.04507653870651800, -95.07596123493895800, 13.25333651340846200 ) ) ; +#7520 = AXIS2_PLACEMENT_3D ( 'NONE', #4943, #12883, #2639 ) ; +#7521 = CARTESIAN_POINT ( 'NONE', ( 38.86005599560729000, -30.63524535288194200, 21.81126076953161400 ) ) ; +#7522 = CARTESIAN_POINT ( 'NONE', ( 12.01804439914385900, -9.671567237363527500, -25.00000000000000400 ) ) ; +#7523 = CARTESIAN_POINT ( 'NONE', ( 36.31930897906116200, -31.27097820553717300, 16.14989117472158500 ) ) ; +#7524 = ADVANCED_FACE ( 'NONE', ( #5262 ), #12693, .F. ) ; +#7525 = CARTESIAN_POINT ( 'NONE', ( 6.923733535140585500, -30.39650425308248700, 24.23796817939685900 ) ) ; +#7526 = CARTESIAN_POINT ( 'NONE', ( 39.79471262300019400, -20.24973553768418100, -8.945466683768657400 ) ) ; +#7527 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457653400, -30.82655086342983000, 27.93782961424065900 ) ) ; +#7528 = CARTESIAN_POINT ( 'NONE', ( 4.839446673331662100, -30.33974953486315600, 22.98878163676591400 ) ) ; +#7529 = EDGE_CURVE ( 'NONE', #12755, #10922, #12323, .T. ) ; +#7530 = CARTESIAN_POINT ( 'NONE', ( 39.96335088529773600, -29.69233772388555100, 21.85437300743866000 ) ) ; +#7531 = VECTOR ( 'NONE', #3967, 1000.000000000000000 ) ; +#7532 = AXIS2_PLACEMENT_3D ( 'NONE', #3137, #10267, #4148 ) ; +#7533 = DIRECTION ( 'NONE', ( -3.551631410960780200E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7534 = ADVANCED_FACE ( 'NONE', ( #10055 ), #7695, .T. ) ; +#7535 = ORIENTED_EDGE ( 'NONE', *, *, #5419, .T. ) ; +#7536 = CARTESIAN_POINT ( 'NONE', ( 10.29949279748107900, -94.73120072039530700, 16.64419714275493000 ) ) ; +#7537 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000900, 16.29999999999999700 ) ) ; +#7538 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #10149 ) ; +#7539 = VECTOR ( 'NONE', #10647, 1000.000000000000000 ) ; +#7540 = CARTESIAN_POINT ( 'NONE', ( 10.51632529784367200, -16.08594607922362100, -24.88346827036581000 ) ) ; +#7541 = CARTESIAN_POINT ( 'NONE', ( 14.87893551405424500, -16.85088604156331700, 23.79200394911342200 ) ) ; +#7542 = CARTESIAN_POINT ( 'NONE', ( 5.189662743956803900, -29.86710201830537800, 22.14300162132739700 ) ) ; +#7543 = CARTESIAN_POINT ( 'NONE', ( 5.297703622232873500, -24.96335050884720600, 10.25075591808190200 ) ) ; +#7544 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -23.91420473869548900, -27.45344971053349400 ) ) ; +#7545 = EDGE_CURVE ( 'NONE', #11438, #607, #2259, .T. ) ; +#7546 = CARTESIAN_POINT ( 'NONE', ( 39.73029472233679400, -19.83608166105387800, 10.90983884395377300 ) ) ; +#7547 = CARTESIAN_POINT ( 'NONE', ( 6.473071706963424700, -89.69640923368777400, 2.374388476378175300 ) ) ; +#7548 = EDGE_CURVE ( 'NONE', #9692, #3358, #2562, .T. ) ; +#7549 = CARTESIAN_POINT ( 'NONE', ( 11.08739497816577700, -95.07596123493894400, 13.87870138358221800 ) ) ; +#7550 = CARTESIAN_POINT ( 'NONE', ( 33.45176491775483600, -31.03766611236259400, 27.05050571724330100 ) ) ; +#7551 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999600300, -97.04517183358908000, 16.23828164244108400 ) ) ; +#7552 = CARTESIAN_POINT ( 'NONE', ( 4.301712980405715000, -10.14552209738075700, 20.48183825822895800 ) ) ; +#7553 = FACE_OUTER_BOUND ( 'NONE', #946, .T. ) ; +#7554 = CARTESIAN_POINT ( 'NONE', ( 12.90136799010446500, -9.562556682370415100, -24.99999999999999600 ) ) ; +#7555 = CARTESIAN_POINT ( 'NONE', ( 12.73987563116316800, -30.78263601109620100, 27.61612735385019200 ) ) ; +#7556 = CARTESIAN_POINT ( 'NONE', ( 8.978612933917705900, -30.00409744795826200, 25.80054495294347200 ) ) ; +#7557 = CARTESIAN_POINT ( 'NONE', ( 34.12813348342134400, -30.94302975633209500, 26.87513444777200500 ) ) ; +#7558 = CARTESIAN_POINT ( 'NONE', ( 35.16139759182242100, -10.85630235489496300, 24.84901079118784000 ) ) ; +#7559 = CARTESIAN_POINT ( 'NONE', ( 37.93834484783131700, -30.88738377373961800, 23.65431702580585900 ) ) ; +#7560 = FACE_OUTER_BOUND ( 'NONE', #4892, .T. ) ; +#7561 = CARTESIAN_POINT ( 'NONE', ( 35.13916457684954500, -29.86928234794212100, 26.26657428146338800 ) ) ; +#7562 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000071100, -5.603196486113240800, 16.11462437770735100 ) ) ; +#7563 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7564 = CARTESIAN_POINT ( 'NONE', ( 38.66932926453412700, -33.35968313355135700, 11.93967752764690400 ) ) ; +#7565 = CARTESIAN_POINT ( 'NONE', ( 7.239753537883126800, -29.35080209561458600, 24.14299764401436100 ) ) ; +#7566 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983000, 27.93782961424065500 ) ) ; +#7567 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999997300, -97.04517183358916600, 16.23828164244106600 ) ) ; +#7568 = CARTESIAN_POINT ( 'NONE', ( 38.89944250365643100, -30.60712856752052200, 21.70094917984280200 ) ) ; +#7569 = LINE ( 'NONE', #1812, #12867 ) ; +#7570 = CARTESIAN_POINT ( 'NONE', ( 5.590192175329331500, -20.23311164555017400, -15.86219686148266200 ) ) ; +#7571 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 9.500000000000000000, -15.51856112887629800 ) ) ; +#7572 = CARTESIAN_POINT ( 'NONE', ( 6.471971501551840000, -93.11565661403247400, 19.26789702203849700 ) ) ; +#7573 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#7574 = AXIS2_PLACEMENT_3D ( 'NONE', #11926, #11884, #12177 ) ; +#7575 = CARTESIAN_POINT ( 'NONE', ( 37.42051953637366800, -12.49999999999999300, -11.86180573790681300 ) ) ; +#7576 = CARTESIAN_POINT ( 'NONE', ( 17.25664287920912100, -18.46163048514489800, 23.50798624468375300 ) ) ; +#7577 = ORIENTED_EDGE ( 'NONE', *, *, #10953, .T. ) ; +#7578 = CARTESIAN_POINT ( 'NONE', ( 11.08142298090377200, -18.40126106891501600, -24.79397778449898800 ) ) ; +#7579 = CARTESIAN_POINT ( 'NONE', ( 6.215319317176405200, -28.93571379490683500, 22.32413466643362900 ) ) ; +#7580 = CARTESIAN_POINT ( 'NONE', ( 4.999999999958664200, -27.69553506562699500, 7.787118573237956200 ) ) ; +#7581 = EDGE_LOOP ( 'NONE', ( #2663, #2760, #2789, #2830, #2919 ) ) ; +#7582 = CARTESIAN_POINT ( 'NONE', ( 10.84367697654310300, -30.82506750083928500, 26.79796871981840300 ) ) ; +#7583 = FACE_OUTER_BOUND ( 'NONE', #10478, .T. ) ; +#7584 = CARTESIAN_POINT ( 'NONE', ( 43.24887926476635200, -8.800629358799838500, -23.00000000000000000 ) ) ; +#7585 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7490, #11634, #9704, #7465, #7444, #7416, #7308, #7217, #7173, #7126 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001065464361979367400, 0.002130928723958734800, 0.003196393085938102200, 0.004261857447917469600 ), + .UNSPECIFIED. ) ; +#7586 = ADVANCED_FACE ( 'NONE', ( #10386 ), #7054, .F. ) ; +#7587 = CARTESIAN_POINT ( 'NONE', ( 18.02474863080731600, -89.21338468287763100, 10.93317457922492000 ) ) ; +#7588 = CARTESIAN_POINT ( 'NONE', ( 33.27123909253272400, -30.65129557289829900, 27.24738585443694200 ) ) ; +#7589 = CARTESIAN_POINT ( 'NONE', ( 4.440204919549418400, -11.76587147119892900, 19.22094601077950700 ) ) ; +#7590 = CARTESIAN_POINT ( 'NONE', ( 38.94931178141215600, -30.55092223628112100, 21.46123905850131000 ) ) ; +#7591 = CARTESIAN_POINT ( 'NONE', ( 12.74077462368615300, -30.61934319956710500, 27.63744727720802900 ) ) ; +#7592 = ORIENTED_EDGE ( 'NONE', *, *, #8124, .F. ) ; +#7593 = CARTESIAN_POINT ( 'NONE', ( 9.232129377361181000, -31.12051736377186000, 25.61721286386610800 ) ) ; +#7594 = CARTESIAN_POINT ( 'NONE', ( 34.23303441149342800, -19.12977337476504000, -24.48732491136305700 ) ) ; +#7595 = CARTESIAN_POINT ( 'NONE', ( 37.39134297492021400, -29.23668185896048800, 25.36077399299938400 ) ) ; +#7596 = CARTESIAN_POINT ( 'NONE', ( 34.90707727875532400, -10.00000000000000000, 25.00000000000000000 ) ) ; +#7597 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11773, #11613, #11343, #11322 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 6.499209280349586300E-005 ), + .UNSPECIFIED. ) ; +#7598 = VERTEX_POINT ( 'NONE', #2127 ) ; +#7599 = CARTESIAN_POINT ( 'NONE', ( 37.99215556243900200, -29.50335148602154700, 24.09398069437590100 ) ) ; +#7600 = CARTESIAN_POINT ( 'NONE', ( 35.23708080204802000, -30.56668369737659700, 26.30628078190395100 ) ) ; +#7601 = CARTESIAN_POINT ( 'NONE', ( 48.30984000060683300, -10.56296316402641500, -21.43596316075247200 ) ) ; +#7602 = ORIENTED_EDGE ( 'NONE', *, *, #2585, .F. ) ; +#7603 = EDGE_LOOP ( 'NONE', ( #12761, #1404, #8418, #4278 ) ) ; +#7604 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#7605 = CARTESIAN_POINT ( 'NONE', ( 39.97598904627933800, -28.03812380488378500, 11.36115117535448600 ) ) ; +#7606 = CARTESIAN_POINT ( 'NONE', ( 7.269441803872283900, -30.79159700016336000, 24.16255996124368700 ) ) ; +#7607 = ORIENTED_EDGE ( 'NONE', *, *, #10866, .F. ) ; +#7608 = CARTESIAN_POINT ( 'NONE', ( 20.10328465607029400, -30.66083845029135100, 28.85693673715485000 ) ) ; +#7609 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 9.500000000000000000, 25.00000000000000000 ) ) ; +#7610 = CARTESIAN_POINT ( 'NONE', ( 39.71826516468989600, -29.35315700550045300, 21.96882966220598000 ) ) ; +#7611 = ORIENTED_EDGE ( 'NONE', *, *, #12667, .T. ) ; +#7612 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -19.99999999999989700, 8.005331014629277300 ) ) ; +#7613 = CARTESIAN_POINT ( 'NONE', ( 18.34818654855864800, -100.0000000000000300, 6.546591031478610200 ) ) ; +#7614 = ORIENTED_EDGE ( 'NONE', *, *, #11029, .T. ) ; +#7615 = CARTESIAN_POINT ( 'NONE', ( 9.373482902900002900, -95.07596123493897300, 14.13131769576716200 ) ) ; +#7616 = CARTESIAN_POINT ( 'NONE', ( 2.373864392718440200, -9.203533794558568500, -23.43915771084337900 ) ) ; +#7617 = EDGE_CURVE ( 'NONE', #4698, #9952, #9747, .T. ) ; +#7618 = CARTESIAN_POINT ( 'NONE', ( 31.65996566508697500, -12.49999999999999500, -20.99132779693114500 ) ) ; +#7619 = CARTESIAN_POINT ( 'NONE', ( 38.91232774151649200, -30.59594650112603300, 21.64945239210249600 ) ) ; +#7620 = CARTESIAN_POINT ( 'NONE', ( 34.49591597118330100, -19.14173825880751800, -24.51839535877628200 ) ) ; +#7621 = CARTESIAN_POINT ( 'NONE', ( 19.51050402207947000, -19.13177118318218100, 23.38982235879437600 ) ) ; +#7622 = CARTESIAN_POINT ( 'NONE', ( 5.601181051866751300, -30.27289797719349500, 22.38939313199756100 ) ) ; +#7623 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000015100, -28.03045011124127600, 7.500406278603053400 ) ) ; +#7624 = CARTESIAN_POINT ( 'NONE', ( 10.85350275181839100, -30.31932237814625400, 26.86644672008445100 ) ) ; +#7625 = ORIENTED_EDGE ( 'NONE', *, *, #2381, .T. ) ; +#7626 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122093500, -0.1736481776669231400 ) ) ; +#7627 = ORIENTED_EDGE ( 'NONE', *, *, #3575, .T. ) ; +#7628 = CARTESIAN_POINT ( 'NONE', ( 17.36633150774184700, -95.07596123493894400, 15.82508929694919800 ) ) ; +#7629 = CARTESIAN_POINT ( 'NONE', ( 33.25820256788410500, -30.99652191109461800, 27.15607337850373800 ) ) ; +#7630 = CARTESIAN_POINT ( 'NONE', ( 37.55113299292239800, -35.14705678807951000, 13.67870921874832400 ) ) ; +#7631 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10106, #2983, #12115, #6048, #13071, #7100, #1006, #8130, #2012, #9146, #3027, #10154, #4024, #11175, #5064, #12160, #6091, #39, #7147, #1049 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0001882553377251475100, 0.0003765106754502950200, 0.0005647660131754425800, 0.0007530213509005900400, 0.0009412766886257376000, 0.001129532026350885200, 0.001506042701801187200, 0.002259064052701785500, 0.003012085403602384400 ), + .UNSPECIFIED. ) ; +#7632 = CARTESIAN_POINT ( 'NONE', ( 13.76586904079734500, -30.82654731345164100, 27.93780948131385600 ) ) ; +#7633 = CARTESIAN_POINT ( 'NONE', ( 6.071532165918824800E-015, -5.000000000000023100, 16.06938735382970800 ) ) ; +#7634 = CARTESIAN_POINT ( 'NONE', ( 12.94473817433310400, -30.83112772447209000, 27.67770564195215900 ) ) ; +#7635 = AXIS2_PLACEMENT_3D ( 'NONE', #2225, #2038, #2309 ) ; +#7636 = CARTESIAN_POINT ( 'NONE', ( 9.109739530750065500, -30.34589443480710000, 25.93734812373009600 ) ) ; +#7637 = CARTESIAN_POINT ( 'NONE', ( 0.07785841796037891400, 10.13070237256533300, -16.79023454383172600 ) ) ; +#7638 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7639 = ORIENTED_EDGE ( 'NONE', *, *, #7266, .T. ) ; +#7640 = PERSON_AND_ORGANIZATION ( #10194, #1109 ) ; +#7641 = CARTESIAN_POINT ( 'NONE', ( 38.12048554482029100, -30.55865139868332400, 24.01734307180782200 ) ) ; +#7642 = VERTEX_POINT ( 'NONE', #4150 ) ; +#7643 = CARTESIAN_POINT ( 'NONE', ( 1.305292868535506400E-012, -9.875775679073045800, -13.19340417986973100 ) ) ; +#7644 = CARTESIAN_POINT ( 'NONE', ( 35.13891114821028300, -31.15538748674946500, 26.03938576937756400 ) ) ; +#7645 = CARTESIAN_POINT ( 'NONE', ( 33.46236602590736500, -15.92138579713126300, -25.18527456375296900 ) ) ; +#7646 = CARTESIAN_POINT ( 'NONE', ( 2.803601128380586300E-012, -5.300670524080670600, 16.09193629111639000 ) ) ; +#7647 = ADVANCED_FACE ( 'NONE', ( #1938 ), #7385, .T. ) ; +#7648 = CARTESIAN_POINT ( 'NONE', ( 7.151458085484984300, -29.79962335343108000, 24.44705089831765900 ) ) ; +#7649 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#7650 = PLANE ( 'NONE', #5381 ) ; +#7651 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -97.04517183358048300, 16.23828164246660700 ) ) ; +#7652 = AXIS2_PLACEMENT_3D ( 'NONE', #1714, #1673, #1565 ) ; +#7653 = CIRCLE ( 'NONE', #12240, 5.000000000000000900 ) ; +#7654 = CARTESIAN_POINT ( 'NONE', ( 39.15325988103567300, -30.50507229362801100, 21.77045998456633300 ) ) ; +#7655 = VERTEX_POINT ( 'NONE', #1126 ) ; +#7656 = CARTESIAN_POINT ( 'NONE', ( 13.35138324016522800, -30.74799657317753400, 27.83090452916407600 ) ) ; +#7657 = CARTESIAN_POINT ( 'NONE', ( 4.507425410610385300, -17.94798263271980000, -16.12802900969641200 ) ) ; +#7658 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9346, #2210, #12357, #6302 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.004625612329668363200 ), + .UNSPECIFIED. ) ; +#7659 = ADVANCED_FACE ( 'NONE', ( #7381 ), #9442, .T. ) ; +#7660 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#7661 = PLANE ( 'NONE', #675 ) ; +#7662 = CARTESIAN_POINT ( 'NONE', ( 15.41740981180912200, -19.17317119955247800, 22.65645263590535700 ) ) ; +#7663 = FACE_OUTER_BOUND ( 'NONE', #3718, .T. ) ; +#7664 = CARTESIAN_POINT ( 'NONE', ( 6.103520986805876600, -29.09342137317242900, 22.59506387645866400 ) ) ; +#7665 = CARTESIAN_POINT ( 'NONE', ( 5.005061069587371800, -27.63065482122640400, 9.396694007200830300 ) ) ; +#7666 = CARTESIAN_POINT ( 'NONE', ( 12.31832343826441600, -100.0000000000000100, -35.71643108392895300 ) ) ; +#7667 = CARTESIAN_POINT ( 'NONE', ( 10.95996633287147200, -31.01847974621024000, 26.77256570941190400 ) ) ; +#7668 = EDGE_CURVE ( 'NONE', #4974, #1847, #10002, .T. ) ; +#7669 = CARTESIAN_POINT ( 'NONE', ( 0.3452688233412146700, -6.890321160133793500, -20.80211470683124400 ) ) ; +#7671 = AXIS2_PLACEMENT_3D ( 'NONE', #2604, #2393, #2337 ) ; +#7670 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -95.07596123493894400, 15.95758058754439400 ) ) ; +#7672 = CARTESIAN_POINT ( 'NONE', ( 33.16689154815192400, -30.53832686410670000, 27.29917802503834800 ) ) ; +#7673 = CARTESIAN_POINT ( 'NONE', ( 28.78858134297357900, -39.19832374357609000, 19.36809462730455400 ) ) ; +#7674 = CARTESIAN_POINT ( 'NONE', ( 12.94138340067893400, -30.66161212989908000, 27.70801044810888700 ) ) ; +#7675 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -97.57596123493893000, 11.50239124669685800 ) ) ; +#7676 = CARTESIAN_POINT ( 'NONE', ( 12.94454811698266300, -30.70344024487477700, 27.69898288382860600 ) ) ; +#7677 = FACE_OUTER_BOUND ( 'NONE', #7145, .T. ) ; +#7678 = CARTESIAN_POINT ( 'NONE', ( 9.336172583513342000, -31.16911093733396900, 25.64853423531861400 ) ) ; +#7679 = CARTESIAN_POINT ( 'NONE', ( 17.83127727668954400, -19.31118671354294800, -26.64181344001173500 ) ) ; +#7680 = CARTESIAN_POINT ( 'NONE', ( 15.63967919497242000, -28.10721621194872500, 27.02101548926132300 ) ) ; +#7681 = CARTESIAN_POINT ( 'NONE', ( 3.959278388919198900, -10.11804121063291900, -23.37569276104543200 ) ) ; +#7682 = CARTESIAN_POINT ( 'NONE', ( 37.68554149863418700, -29.22248872891072900, 24.06364501702317000 ) ) ; +#7683 = CARTESIAN_POINT ( 'NONE', ( 0.6234536959246447200, -10.21128780158657400, -16.14248580011004500 ) ) ; +#7684 = CARTESIAN_POINT ( 'NONE', ( 35.03900202624938500, -30.42989876236979200, 26.42749933598632200 ) ) ; +#7685 = CARTESIAN_POINT ( 'NONE', ( 44.28575840597515900, -9.894622261220279200, 13.59266823657660200 ) ) ; +#7686 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#7687 = CARTESIAN_POINT ( 'NONE', ( 21.71061107369773400, -33.38446413645536400, 26.50168804333867500 ) ) ; +#7688 = CARTESIAN_POINT ( 'NONE', ( 0.01759237559333277900, -5.603762814293526500, 16.11565712603684000 ) ) ; +#7689 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.04531648070944500, 16.23785755017207300 ) ) ; +#7690 = CARTESIAN_POINT ( 'NONE', ( 7.595268734868115600, -31.05312671928857800, 24.07259666848603900 ) ) ; +#7691 = CARTESIAN_POINT ( 'NONE', ( 10.64046686170100400, -29.04582602365635700, 27.10751997110523300 ) ) ; +#7692 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7693 = CARTESIAN_POINT ( 'NONE', ( 7.496804940095882100, -95.07594910539326300, 12.91381487504025700 ) ) ; +#7694 = EDGE_CURVE ( 'NONE', #300, #5370, #7658, .T. ) ; +#7695 = TOROIDAL_SURFACE ( 'NONE', #9163, 3.000000000000000000, 2.000000000000000000 ) ; +#7696 = CARTESIAN_POINT ( 'NONE', ( 39.09476176328843200, -29.03910285796326800, 22.19252619405641600 ) ) ; +#7697 = CARTESIAN_POINT ( 'NONE', ( 2.907591637494221400, -9.542884175573869100, 21.76669323168905400 ) ) ; +#7698 = CARTESIAN_POINT ( 'NONE', ( 5.637961728807304100, -22.82940756013875800, -16.46250858148318800 ) ) ; +#7699 = CARTESIAN_POINT ( 'NONE', ( 7.357832127170920200, -95.07596123493895800, 10.80590731068795000 ) ) ; +#7700 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7701 = CARTESIAN_POINT ( 'NONE', ( 10.26307352435313000, -19.10212390033426600, -24.17093675633585500 ) ) ; +#7702 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#7703 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -10.00000000000000000, 25.00000000000000000 ) ) ; +#7704 = CARTESIAN_POINT ( 'NONE', ( 6.219729095310459100, -30.66668535989791500, 22.52250280930552500 ) ) ; +#7705 = CIRCLE ( 'NONE', #5112, 5.000000000000000900 ) ; +#7706 = CARTESIAN_POINT ( 'NONE', ( 5.124234567678180400, -28.30733713580519900, 8.832979447467201000 ) ) ; +#7707 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000900, 20.69000000000000100 ) ) ; +#7708 = CARTESIAN_POINT ( 'NONE', ( 10.93696036261096600, -30.54731377178404000, 26.90497717665161300 ) ) ; +#7709 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, -95.43443845998484700, 21.53726769629899400 ) ) ; +#7710 = EDGE_CURVE ( 'NONE', #8893, #4526, #5243, .T. ) ; +#7711 = CARTESIAN_POINT ( 'NONE', ( 24.94829993165052800, -27.96429671943140600, 27.45736486687246400 ) ) ; +#7712 = CARTESIAN_POINT ( 'NONE', ( 33.16689345344369900, -30.87894993761569400, 27.23911788692193500 ) ) ; +#7713 = CARTESIAN_POINT ( 'NONE', ( 9.124222607455312300, -12.50000000000000000, 15.65780615834913500 ) ) ; +#7714 = CARTESIAN_POINT ( 'NONE', ( 3.862137452538778600, -11.43580060104160800, 18.68032453106356500 ) ) ; +#7715 = CARTESIAN_POINT ( 'NONE', ( 21.70122382629904200, -33.90000214910052300, 20.78578478212557800 ) ) ; +#7716 = CARTESIAN_POINT ( 'NONE', ( 0.08954246313586652900, -6.200261565856674700, 16.16480289715242000 ) ) ; +#7717 = CARTESIAN_POINT ( 'NONE', ( 13.25162378220025000, -30.86240334204656200, 27.77269985928139900 ) ) ; +#7718 = CARTESIAN_POINT ( 'NONE', ( 9.197777347057860100, -30.54271267062667400, 25.96909396680931400 ) ) ; +#7719 = CIRCLE ( 'NONE', #6552, 3.189999999999995100 ) ; +#7720 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#7721 = CARTESIAN_POINT ( 'NONE', ( 3.570247351840480000, -9.245777645065972500, -24.35216142947949800 ) ) ; +#7722 = ADVANCED_FACE ( 'NONE', ( #1629 ), #2890, .F. ) ; +#7723 = CARTESIAN_POINT ( 'NONE', ( 10.74307466181910800, -13.39205116878636500, -24.99999999999998900 ) ) ; +#7724 = CARTESIAN_POINT ( 'NONE', ( 38.12211867744353100, -30.27059385309767900, 24.26238760964869500 ) ) ; +#7725 = CARTESIAN_POINT ( 'NONE', ( -3.209238430557093100E-014, -5.478670524602396300, -18.85175910840468900 ) ) ; +#7726 = ORIENTED_EDGE ( 'NONE', *, *, #10819, .T. ) ; +#7727 = AXIS2_PLACEMENT_3D ( 'NONE', #2519, #2499, #2475 ) ; +#7728 = CARTESIAN_POINT ( 'NONE', ( 34.98222546237808200, -31.05318521697723400, 26.21936223109858900 ) ) ; +#7729 = ORIENTED_EDGE ( 'NONE', *, *, #11029, .F. ) ; +#7730 = CARTESIAN_POINT ( 'NONE', ( 21.66666666666666400, -39.55229479934740100, 19.78913308502480100 ) ) ; +#7731 = TOROIDAL_SURFACE ( 'NONE', #8428, 2.500000000000000000, 2.500000000000000000 ) ; +#7732 = CARTESIAN_POINT ( 'NONE', ( 11.93837392171543900, -10.08216332973951500, -24.99999999999615200 ) ) ; +#7733 = CARTESIAN_POINT ( 'NONE', ( 21.66531159895910400, -39.55226891410963200, 19.78913764929062300 ) ) ; +#7734 = CARTESIAN_POINT ( 'NONE', ( 0.1438700343912651400, -6.495959596344897100, 16.19035880264436500 ) ) ; +#7735 = CARTESIAN_POINT ( 'NONE', ( 8.006824701501775700, -23.31194076014969200, -21.27732369755534600 ) ) ; +#7736 = CARTESIAN_POINT ( 'NONE', ( 7.206170774039617500, -30.15070829616809800, 24.60820299195010500 ) ) ; +#7737 = CARTESIAN_POINT ( 'NONE', ( 7.919063731065503700, -31.14373878535234800, 25.22334512433464600 ) ) ; +#7738 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999999300, -7.318161004754081500, -16.45148638174164200 ) ) ; +#7739 = CARTESIAN_POINT ( 'NONE', ( 44.89346046021379500, -95.07596123493894400, -1.866925240466575500 ) ) ; +#7740 = CARTESIAN_POINT ( 'NONE', ( 39.65211220130020600, -30.19880989364290600, 21.97256980115998800 ) ) ; +#7741 = ORIENTED_EDGE ( 'NONE', *, *, #11984, .F. ) ; +#7742 = CARTESIAN_POINT ( 'NONE', ( 12.51339777472245300, -30.56235595747358900, 27.55818365868113800 ) ) ; +#7743 = CARTESIAN_POINT ( 'NONE', ( 19.16691576264560500, -100.0000000000000300, 6.630571736238754200 ) ) ; +#7744 = CIRCLE ( 'NONE', #10099, 5.000000000000000900 ) ; +#7745 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999996400, -21.83197108425952800, -11.26227537804465600 ) ) ; +#7746 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.500000000000000000, -23.00000000000000000 ) ) ; +#7747 = AXIS2_PLACEMENT_3D ( 'NONE', #2829, #2738, #2720 ) ; +#7748 = CARTESIAN_POINT ( 'NONE', ( 5.758332749785673800, -29.49234181311652500, 22.74984162252877300 ) ) ; +#7749 = CARTESIAN_POINT ( 'NONE', ( 5.080480534840372500, -28.97208599018461300, 8.247879060001256600 ) ) ; +#7750 = CARTESIAN_POINT ( 'NONE', ( 8.340391219197014600, -97.40634803306923600, 19.50070648530896700 ) ) ; +#7751 = CARTESIAN_POINT ( 'NONE', ( 11.16069850404753100, -31.07113560961006000, 26.84713767803037900 ) ) ; +#7752 = ORIENTED_EDGE ( 'NONE', *, *, #4260, .T. ) ; +#7753 = CARTESIAN_POINT ( 'NONE', ( 38.28799367709280700, -7.463541018600230000, -24.99999999999999600 ) ) ; +#7754 = CARTESIAN_POINT ( 'NONE', ( 32.86246480003643500, -30.49305758681100500, 27.42144062581060400 ) ) ; +#7755 = ORIENTED_EDGE ( 'NONE', *, *, #1316, .F. ) ; +#7756 = CARTESIAN_POINT ( 'NONE', ( 18.34205036694098100, -12.50000000000000200, 21.97513787462291600 ) ) ; +#7757 = CARTESIAN_POINT ( 'NONE', ( 3.624820469000838800, -9.968106566905488500, 19.72660394707870800 ) ) ; +#7758 = CARTESIAN_POINT ( 'NONE', ( 0.2931655423917123900, -7.081721199947143200, 16.24346343865991200 ) ) ; +#7759 = CARTESIAN_POINT ( 'NONE', ( 13.25250320340566600, -30.78435119365493500, 27.78786671116434100 ) ) ; +#7760 = ORIENTED_EDGE ( 'NONE', *, *, #2706, .T. ) ; +#7761 = CARTESIAN_POINT ( 'NONE', ( 9.329598614264883200, -29.74335078883387200, 25.90992010925143100 ) ) ; +#7762 = CARTESIAN_POINT ( 'NONE', ( 10.76051537233315300, -19.14343504875553100, -24.48086719563662700 ) ) ; +#7763 = ORIENTED_EDGE ( 'NONE', *, *, #10834, .F. ) ; +#7764 = CARTESIAN_POINT ( 'NONE', ( 35.85487568079556600, -11.60934974583663000, 24.15818074541406100 ) ) ; +#7765 = CARTESIAN_POINT ( 'NONE', ( 6.244068087463159800, -9.858350416279552800, -24.74838803483811800 ) ) ; +#7766 = ORIENTED_EDGE ( 'NONE', *, *, #1316, .T. ) ; +#7767 = AXIS2_PLACEMENT_3D ( 'NONE', #1927, #3897, #12036 ) ; +#7768 = CARTESIAN_POINT ( 'NONE', ( 37.66663924872127500, -31.02752412834009000, 23.72875344859589600 ) ) ; +#7769 = ORIENTED_EDGE ( 'NONE', *, *, #11821, .F. ) ; +#7770 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -5.000000000000000900, 25.00000000000000000 ) ) ; +#7771 = EDGE_CURVE ( 'NONE', #4714, #9692, #564, .T. ) ; +#7772 = CARTESIAN_POINT ( 'NONE', ( 34.62708739997354000, -30.22541814760249700, 26.62455043974056000 ) ) ; +#7773 = CARTESIAN_POINT ( 'NONE', ( 33.59424268543300200, -17.07142213206428800, -25.06701809440275100 ) ) ; +#7774 = VERTEX_POINT ( 'NONE', #351 ) ; +#7775 = CARTESIAN_POINT ( 'NONE', ( 11.40388762656397000, -10.99396802320458200, -25.05539813725696900 ) ) ; +#7776 = CARTESIAN_POINT ( 'NONE', ( 23.28685894211762900, -33.38451246545243100, 26.50167952163796800 ) ) ; +#7777 = CARTESIAN_POINT ( 'NONE', ( 0.3877183264812795700, -7.369288629509765300, 16.27079787856227000 ) ) ; +#7778 = CARTESIAN_POINT ( 'NONE', ( 18.99181596820315900, -23.91167042892982100, -27.42717282681471500 ) ) ; +#7779 = VERTEX_POINT ( 'NONE', #12687 ) ; +#7780 = CARTESIAN_POINT ( 'NONE', ( 7.612028654764627900, -29.26658101391831200, 24.37117056991085200 ) ) ; +#7781 = CARTESIAN_POINT ( 'NONE', ( 42.03253310345702000, -10.85033793569535700, -21.37540860246187400 ) ) ; +#7782 = CARTESIAN_POINT ( 'NONE', ( 37.65000894053683600, -95.07596123493894400, 3.052861428461966400 ) ) ; +#7783 = CARTESIAN_POINT ( 'NONE', ( 38.78450695365308600, -28.93570355676185500, 22.32451116953439300 ) ) ; +#7784 = CARTESIAN_POINT ( 'NONE', ( 12.49198294388526200, -30.55736320192914600, 27.55061809849156500 ) ) ; +#7785 = DIRECTION ( 'NONE', ( 0.5697332752314372400, -0.06212487650148249000, -0.8194781844648062500 ) ) ; +#7786 = ORIENTED_EDGE ( 'NONE', *, *, #4497, .T. ) ; +#7787 = ADVANCED_FACE ( 'NONE', ( #6722 ), #3380, .T. ) ; +#7788 = ORIENTED_EDGE ( 'NONE', *, *, #8279, .F. ) ; +#7789 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122091300, -0.1736481776669239500 ) ) ; +#7790 = CARTESIAN_POINT ( 'NONE', ( 27.40918122865823400, -99.99999999999998600, 21.55101145228825700 ) ) ; +#7791 = EDGE_CURVE ( 'NONE', #11083, #8090, #1324, .T. ) ; +#7792 = VERTEX_POINT ( 'NONE', #7707 ) ; +#7793 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#7794 = CARTESIAN_POINT ( 'NONE', ( 23.29621515491250200, -33.90005107094094000, 20.78577615589115600 ) ) ; +#7795 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2923, #12276, #8340, #2215 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.009785623483065135000, 0.01152703402261710600 ), + .UNSPECIFIED. ) ; +#7796 = CARTESIAN_POINT ( 'NONE', ( 20.00727433001728200, -27.99011422758334400, 27.51063530140411500 ) ) ; +#7797 = CARTESIAN_POINT ( 'NONE', ( 6.672409943071930800, -30.87117908809272700, 22.85004165109158700 ) ) ; +#7798 = CARTESIAN_POINT ( 'NONE', ( 5.024010953720100800, -28.03812380488190600, 11.36115117535576100 ) ) ; +#7799 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7800 = CARTESIAN_POINT ( 'NONE', ( 11.13253338545937700, -30.67562075315549900, 26.97901883558106600 ) ) ; +#7801 = CARTESIAN_POINT ( 'NONE', ( 3.405745210161172500, -10.00293073726415800, -22.86614729118477000 ) ) ; +#7802 = ORIENTED_EDGE ( 'NONE', *, *, #11714, .F. ) ; +#7803 = CARTESIAN_POINT ( 'NONE', ( 39.48864376844337400, -8.425002469097112400, -24.94990327264650500 ) ) ; +#7804 = CARTESIAN_POINT ( 'NONE', ( 32.86946441186330500, -30.77197294025622700, 27.39085023612246400 ) ) ; +#7805 = FACE_OUTER_BOUND ( 'NONE', #2149, .T. ) ; +#7806 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9848077530122092400, 0.1736481776669238600 ) ) ; +#7807 = CARTESIAN_POINT ( 'NONE', ( 3.485195034906744200, -11.18111950802256500, 18.32702822095991400 ) ) ; +#7808 = VECTOR ( 'NONE', #9756, 999.9999999999998900 ) ; +#7809 = CARTESIAN_POINT ( 'NONE', ( 13.35395448335980000, -30.86416091712974500, 27.80526268770322000 ) ) ; +#7810 = AXIS2_PLACEMENT_3D ( 'NONE', #3653, #3628, #3581 ) ; +#7811 = CARTESIAN_POINT ( 'NONE', ( 9.407343226765080500, -30.77595917611169400, 26.00901161826912400 ) ) ; +#7812 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -30.86101731591739400, 26.28307327246300700 ) ) ; +#7813 = CARTESIAN_POINT ( 'NONE', ( 6.445544729385821000, -8.060295047777881200, -24.98081820537595000 ) ) ; +#7814 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7815 = CARTESIAN_POINT ( 'NONE', ( 38.08692668757860400, -30.00807694849273600, 24.31631784139919000 ) ) ; +#7816 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -5.000000000000000900, -23.00000000000000000 ) ) ; +#7817 = VECTOR ( 'NONE', #9633, 1000.000000000000000 ) ; +#7818 = CARTESIAN_POINT ( 'NONE', ( 34.64270190945065800, -30.81363905098006100, 26.55041372690539000 ) ) ; +#7819 = CARTESIAN_POINT ( 'NONE', ( 32.84082039161231100, -30.47848671015236000, 27.42986472715609400 ) ) ; +#7820 = ORIENTED_EDGE ( 'NONE', *, *, #2938, .F. ) ; +#7821 = CARTESIAN_POINT ( 'NONE', ( 23.33200865503668800, -39.55232010392580100, 19.78912862314489700 ) ) ; +#7822 = CARTESIAN_POINT ( 'NONE', ( 0.6166141079662294000, -7.924518698412054400, 16.32585113481362500 ) ) ; +#7823 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1709, #12673, #4749, #11870, #5781, #12830, #6830, #747, #7867, #1752, #8888, #2756, #9891, #3764, #10900, #4793, #11913, #5830, #12871, #6876, #793, #7911, #1789, #8932, #2803, #9933, #3810, #10949, #4837, #11952, #5872, #12908, #6914, #834, #7959, #1834, #8972, #2849, #9981, #3851, #10995, #4882, #11992, #5913, #12944, #6963, #871, #8004, #1883, #9016, #2893, #10026 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.01578425086691582400, 0.03156850173383164700, 0.06313700346766329400, 0.1262740069353265900, 0.1894110104029898800, 0.2209795121368215400, 0.2525480138706531800, 0.2602759697080681000, 0.3143716605699725700, 0.3761953072692919600, 0.4380189539686113500, 0.4689307773182710400, 0.4998426006679307400, 0.5311368624931085400, 0.5624311243182862400, 0.6250196479686418400, 0.6876081716189974500, 0.7189024334441751500, 0.7501966952693529500, 0.7814221083606838200, 0.8126475214520148000, 0.8750983476346765300, 0.9375491738173382700, 0.9687745869086691300, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#7824 = CARTESIAN_POINT ( 'NONE', ( 7.551239546850718300, -30.44436228191811400, 24.82016704758200700 ) ) ; +#7825 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#7826 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000005300, 51.02052347080197600, 0.9909638431422895800 ) ) ; +#7827 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #7889, #1730, #9913, #3787 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.570796326794896100, 3.141592653589793100 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#7828 = CARTESIAN_POINT ( 'NONE', ( 34.19682794205556300, -89.38768284284465400, 7.844758748650803200 ) ) ; +#7829 = CARTESIAN_POINT ( 'NONE', ( 39.81040121257677800, -29.86684257689934400, 22.14302294723265200 ) ) ; +#7830 = CYLINDRICAL_SURFACE ( 'NONE', #2203, 14.99999999999999800 ) ; +#7831 = CARTESIAN_POINT ( 'NONE', ( 12.44510507862694300, -30.54638638582400700, 27.53392675361102300 ) ) ; +#7832 = CARTESIAN_POINT ( 'NONE', ( 39.09542559733209500, -17.98221839660839500, -19.65719862844261500 ) ) ; +#7833 = CARTESIAN_POINT ( 'NONE', ( 36.31847316417843500, -31.00516394412575800, 25.28993743607492200 ) ) ; +#7834 = CARTESIAN_POINT ( 'NONE', ( 24.84316682193742700, -20.86815979440160600, -26.91551822300469300 ) ) ; +#7835 = CARTESIAN_POINT ( 'NONE', ( 44.53938968340891300, -7.177506740302041200, 16.88345883397083500 ) ) ; +#7836 = CARTESIAN_POINT ( 'NONE', ( 24.85960558233109200, -33.35446909076583900, 26.50697697917649300 ) ) ; +#7837 = CARTESIAN_POINT ( 'NONE', ( 7.342459200650211000, -94.71789415304289200, 15.10332031092275300 ) ) ; +#7838 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8647, #8660, #5293, #5279 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.004319406882215820000 ), + .UNSPECIFIED. ) ; +#7839 = CARTESIAN_POINT ( 'NONE', ( 5.947463135428592700, -29.92997385232305500, 23.17288773635853300 ) ) ; +#7840 = CARTESIAN_POINT ( 'NONE', ( 5.481787585728045400, -29.13501009258655100, 10.34245753972141400 ) ) ; +#7841 = CARTESIAN_POINT ( 'NONE', ( 35.01695990049104500, -23.53479335490827000, -23.53683523239254800 ) ) ; +#7842 = CARTESIAN_POINT ( 'NONE', ( 11.16062144634872800, -30.22435040089520800, 26.99662342518990600 ) ) ; +#7843 = FACE_OUTER_BOUND ( 'NONE', #6021, .T. ) ; +#7844 = EDGE_CURVE ( 'NONE', #7272, #2676, #11390, .T. ) ; +#7845 = CARTESIAN_POINT ( 'NONE', ( 2.972325801248984200, -10.85387883638550500, -21.38065249224105100 ) ) ; +#7847 = AXIS2_PLACEMENT_3D ( 'NONE', #4231, #4207, #4187 ) ; +#7846 = CARTESIAN_POINT ( 'NONE', ( 38.99013890109429100, -10.29218109216763600, -24.58811991365313400 ) ) ; +#7848 = ORIENTED_EDGE ( 'NONE', *, *, #5536, .T. ) ; +#7849 = CARTESIAN_POINT ( 'NONE', ( 32.66168449881647700, -30.52170365985674000, 27.49703087780046600 ) ) ; +#7850 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 1, 3, ( + ( #2862, #5885, #9994, #3864, #11005, #4896, #12005, #5925, #12956, #6980, #888, #8012, #1897, #9031, #2906, #10036, #3909, #11050 ), + ( #4939, #12044, #5969, #13000, #7029, #935, #8052, #1936, #9074, #2949, #10073, #3951, #11099, #4981, #12088, #6015, #13040, #7071 ), + ( #979, #8099, #1980, #9115, #2996, #10119, #3993, #11145, #5031, #12128, #6062, #9, #7115, #1019, #8145, #2025, #9157, #3041 ), + ( #10170, #4038, #11188, #5075, #12175, #6105, #53, #7162, #1063, #8186, #2072, #9205, #3080, #10213, #4087, #11231, #5117, #12217 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 2, 1, 1, 2 ), + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( -0.2305239006885266000, -0.2127424419828360400, 0.0000000000000000000, 1.000000000000000000 ), + ( 3.063052837250047400, 3.269219855141877900, 3.475386873033707900, 3.681553890925538300, 3.887720908817368800, 4.093887926709198800, 4.300054944601029700, 4.506221962492859700, 4.712388980384689700 ), + .UNSPECIFIED. ) ; +#7851 = CARTESIAN_POINT ( 'NONE', ( 12.37450166043582700, -30.52977599890709100, 27.50857479315224600 ) ) ; +#7852 = CARTESIAN_POINT ( 'NONE', ( 0.7512307727436050600, -8.193477844384569100, 16.35369315499275400 ) ) ; +#7853 = CARTESIAN_POINT ( 'NONE', ( 13.35519866640585600, -30.80770810946431800, 27.81665270843575400 ) ) ; +#7854 = CARTESIAN_POINT ( 'NONE', ( 9.440344448574302700, -30.03977950967481900, 26.08735890878607600 ) ) ; +#7855 = CARTESIAN_POINT ( 'NONE', ( 44.90830324199245600, -5.985134104288990300, 16.79747943854452400 ) ) ; +#7856 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -26.59114142747198500, 7.569598271875622500 ) ) ; +#7857 = CARTESIAN_POINT ( 'NONE', ( 37.69979083691882200, -30.97971765696339500, 23.80264006267929800 ) ) ; +#7858 = CARTESIAN_POINT ( 'NONE', ( 26.82277587909482400, -23.32062493109817000, -27.27856251804230300 ) ) ; +#7859 = CIRCLE ( 'NONE', #4095, 1.200000000000010200 ) ; +#7860 = CARTESIAN_POINT ( 'NONE', ( 34.41068053859199000, -30.08388956792485700, 26.70551952104457500 ) ) ; +#7861 = CARTESIAN_POINT ( 'NONE', ( 35.34679055347202600, -29.80944315631999300, 26.12639780621299600 ) ) ; +#7862 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#7863 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 12.00000000000000000, -22.50000000000000000 ) ) ; +#7864 = CARTESIAN_POINT ( 'NONE', ( 7.848061975256229900, -29.40255660219868300, 24.69082066346466700 ) ) ; +#7865 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, -15.51856112887629800 ) ) ; +#7866 = EDGE_CURVE ( 'NONE', #3401, #4830, #9039, .T. ) ; +#7867 = CARTESIAN_POINT ( 'NONE', ( 6.454779526476579900, -30.79587551228340900, 22.48806931859847700 ) ) ; +#7868 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2457, #6567, #2547, #9690, #3563, #10693, #4574, #11719, #5616, #12680, #6661, #583, #7699, #1593 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( -2.516185457243559400E-005, 0.002092784865360810700, 0.004210731585294056000, 0.008446625025160530900, 0.01268251846502700700, 0.01480046518496024400, 0.01691841190489348100 ), + .UNSPECIFIED. ) ; +#7869 = CARTESIAN_POINT ( 'NONE', ( 27.63366849225827300, -95.07596123493894400, 15.82508929695141500 ) ) ; +#7870 = EDGE_CURVE ( 'NONE', #11270, #1415, #6658, .T. ) ; +#7871 = CARTESIAN_POINT ( 'NONE', ( 38.78269957571578200, -30.68420406136259600, 22.01680112028735100 ) ) ; +#7872 = LINE ( 'NONE', #3578, #10860 ) ; +#7873 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #167 ) ) ; +#7874 = CARTESIAN_POINT ( 'NONE', ( 38.94931178141215600, -30.55092223628112100, 21.46123905850131000 ) ) ; +#7875 = CARTESIAN_POINT ( 'NONE', ( 39.56397175010084800, -17.97337863592349500, -18.70884867549983000 ) ) ; +#7876 = CARTESIAN_POINT ( 'NONE', ( 36.23351247017768600, -29.77357909673897400, 25.57556585934495900 ) ) ; +#7877 = CARTESIAN_POINT ( 'NONE', ( 25.94472281184964000, -20.86700841409326700, -26.89634890696128300 ) ) ; +#7878 = CARTESIAN_POINT ( 'NONE', ( 44.92341964571164000, -6.086564498209456900, 16.15548290886329500 ) ) ; +#7879 = CARTESIAN_POINT ( 'NONE', ( 12.86566546873049100, -95.07596123493894400, 15.71979342092972100 ) ) ; +#7880 = CARTESIAN_POINT ( 'NONE', ( 6.673865480438478500, -29.04370193224891100, 23.17237133883839200 ) ) ; +#7881 = CARTESIAN_POINT ( 'NONE', ( 5.324008823961139400, -30.34620024003171300, 9.363122272370748800 ) ) ; +#7882 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -22.36781719137903200, -11.94938068502386800 ) ) ; +#7883 = CARTESIAN_POINT ( 'NONE', ( 11.23416286524835800, -30.79709521721303400, 26.99716386450225200 ) ) ; +#7884 = LINE ( 'NONE', #1971, #5133 ) ; +#7885 = CARTESIAN_POINT ( 'NONE', ( 11.84857818826807500, -19.27114070690244300, 20.92020710632774800 ) ) ; +#7886 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#7887 = CARTESIAN_POINT ( 'NONE', ( 40.50120854615133200, -10.03600942990358800, -23.85786606597047700 ) ) ; +#7888 = CARTESIAN_POINT ( 'NONE', ( 32.66697648535966200, -30.72706212184366200, 27.47726049333885000 ) ) ; +#7889 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -90.07596123493897300, -4.350951650170485700 ) ) ; +#7890 = CARTESIAN_POINT ( 'NONE', ( 12.20777082952729100, -30.49000881699734200, 27.44716269084349800 ) ) ; +#7891 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7892 = CARTESIAN_POINT ( 'NONE', ( 13.35395767261364400, -30.74595097689156000, 27.82611037135708500 ) ) ; +#7893 = ORIENTED_EDGE ( 'NONE', *, *, #1396, .F. ) ; +#7894 = CARTESIAN_POINT ( 'NONE', ( 9.564322576393273300, -31.05842171857572300, 25.91615419901113900 ) ) ; +#7895 = ORIENTED_EDGE ( 'NONE', *, *, #12545, .F. ) ; +#7896 = CARTESIAN_POINT ( 'NONE', ( -9.463409338252725300E-017, -9.592406127502323800, -11.53187062879840900 ) ) ; +#7897 = CARTESIAN_POINT ( 'NONE', ( 9.954737007478007300, -20.77772991524786800, 19.18925968697773100 ) ) ; +#7898 = CARTESIAN_POINT ( 'NONE', ( 33.30850665730462600, -100.0000000000000100, 3.447248114129462900 ) ) ; +#7899 = CARTESIAN_POINT ( 'NONE', ( 6.048813848143646900, -30.55012901976708100, 21.46098783608997400 ) ) ; +#7900 = CIRCLE ( 'NONE', #9380, 3.189999999999995100 ) ; +#7901 = CARTESIAN_POINT ( 'NONE', ( 37.77322057837512400, -29.64549335641957800, 24.40489973553416200 ) ) ; +#7902 = CARTESIAN_POINT ( 'NONE', ( 27.85038573460868200, -17.91995487565193600, -26.39650173057093600 ) ) ; +#7903 = CARTESIAN_POINT ( 'NONE', ( 34.45754380198768300, -30.65291147729160300, 26.69787751654980200 ) ) ; +#7904 = CARTESIAN_POINT ( 'NONE', ( 37.42496649182046300, -29.25735624665460200, 24.32854257906095800 ) ) ; +#7905 = ORIENTED_EDGE ( 'NONE', *, *, #6917, .T. ) ; +#7906 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.734723475976807600E-016, 1.000000000000000000 ) ) ; +#7907 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 12.00000000000000000, -22.50000000000000000 ) ) ; +#7908 = CARTESIAN_POINT ( 'NONE', ( 7.846163660543557400, -30.79754955977591600, 24.77603478350826500 ) ) ; +#7909 = ORIENTED_EDGE ( 'NONE', *, *, #952, .T. ) ; +#7910 = CARTESIAN_POINT ( 'NONE', ( 19.40794781316023800, -22.72591395891846500, -27.24392198513171300 ) ) ; +#7911 = CARTESIAN_POINT ( 'NONE', ( 8.348390447799758400, -31.14605229715664000, 24.80496605896758000 ) ) ; +#7912 = CARTESIAN_POINT ( 'NONE', ( 42.98400832844305300, 10.14820631820833600, -24.92004164221552600 ) ) ; +#7913 = CARTESIAN_POINT ( 'NONE', ( 39.50499246654212000, -29.58516802124233200, 22.51285740777412400 ) ) ; +#7914 = ORIENTED_EDGE ( 'NONE', *, *, #4676, .F. ) ; +#7915 = CARTESIAN_POINT ( 'NONE', ( 26.34878276351132700, -33.30850345544719500, 26.48024639151466200 ) ) ; +#7916 = CARTESIAN_POINT ( 'NONE', ( 39.77674369167238000, -17.96879140955970300, -18.22023881512634300 ) ) ; +#7917 = ORIENTED_EDGE ( 'NONE', *, *, #12753, .F. ) ; +#7918 = CARTESIAN_POINT ( 'NONE', ( 36.32658023252035000, -30.68034232638762000, 25.54443887252698200 ) ) ; +#7919 = CARTESIAN_POINT ( 'NONE', ( 6.891099399541629600, -8.416661552684711700, 25.00000000000000000 ) ) ; +#7920 = CARTESIAN_POINT ( 'NONE', ( 28.12787568575130200, -18.04874580466079300, -27.88136399733491900 ) ) ; +#7921 = EDGE_CURVE ( 'NONE', #3193, #7107, #4265, .T. ) ; +#7922 = EDGE_LOOP ( 'NONE', ( #11862, #10938, #12900, #11709 ) ) ; +#7923 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.734723475976807600E-016 ) ) ; +#7924 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -5.000000000000000900, 25.00000000000000000 ) ) ; +#7925 = CARTESIAN_POINT ( 'NONE', ( 18.82170137268650500, -95.07596123493895800, 17.89388302601051400 ) ) ; +#7926 = CARTESIAN_POINT ( 'NONE', ( 6.195772504228211000, -30.27314874022740900, 23.35316821926350500 ) ) ; +#7927 = CARTESIAN_POINT ( 'NONE', ( 5.032271770814301900, -28.17430490410057700, 12.01230829561934500 ) ) ; +#7928 = CARTESIAN_POINT ( 'NONE', ( 18.49477210005636600, -27.99878741904140300, 27.44663141960074500 ) ) ; +#7929 = CARTESIAN_POINT ( 'NONE', ( 11.24733614615629500, -30.34389654716563800, 27.04775154196159200 ) ) ; +#7930 = VERTEX_POINT ( 'NONE', #6889 ) ; +#7931 = CARTESIAN_POINT ( 'NONE', ( 9.414239589871915100, -19.38485867140591900, 18.90518549794710500 ) ) ; +#7932 = CARTESIAN_POINT ( 'NONE', ( 30.31449499326990300, -20.12955195223322800, 22.23404942590480700 ) ) ; +#7933 = ORIENTED_EDGE ( 'NONE', *, *, #2961, .T. ) ; +#7934 = CARTESIAN_POINT ( 'NONE', ( 41.99016751489372700, -9.309394958576978900, -23.97652313488872300 ) ) ; +#7935 = CARTESIAN_POINT ( 'NONE', ( 32.66196134357497300, -30.95628311569960900, 27.42123880170805000 ) ) ; +#7936 = CARTESIAN_POINT ( 'NONE', ( 15.41147742623699600, -95.07596123493894400, 15.95758058754439400 ) ) ; +#7937 = CARTESIAN_POINT ( 'NONE', ( 12.06150703749201000, -30.45421547164821200, 27.39046967367875900 ) ) ; +#7938 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002700, 12.00000000000000000, -22.50000000000000000 ) ) ; +#7939 = CARTESIAN_POINT ( 'NONE', ( 13.56039876430019900, -30.82563645058357300, 27.87711704441776600 ) ) ; +#7940 = CARTESIAN_POINT ( 'NONE', ( 10.59746763446345200, -19.46672598713224600, -24.31406942465151400 ) ) ; +#7941 = CARTESIAN_POINT ( 'NONE', ( 9.483692365542042400, -30.36855828863311000, 26.16527014147007400 ) ) ; +#7942 = CARTESIAN_POINT ( 'NONE', ( 11.75274609221295900, -94.73587760758712800, 17.26036566048645300 ) ) ; +#7943 = CARTESIAN_POINT ( 'NONE', ( 24.88779164670175700, -25.56956072262180500, 22.25466636682309500 ) ) ; +#7944 = VERTEX_POINT ( 'NONE', #10966 ) ; +#7945 = AXIS2_PLACEMENT_3D ( 'NONE', #12795, #12613, #12572 ) ; +#7946 = CARTESIAN_POINT ( 'NONE', ( 4.999999409737090300, -29.76883431205937200, 21.59875012312543800 ) ) ; +#7947 = CARTESIAN_POINT ( 'NONE', ( 37.77323827956703900, -30.72802910169689000, 24.21401837263684300 ) ) ; +#7948 = VERTEX_POINT ( 'NONE', #4854 ) ; +#7949 = CARTESIAN_POINT ( 'NONE', ( 33.43362073434168000, -17.74219290512550300, -26.36515749902293800 ) ) ; +#7950 = EDGE_CURVE ( 'NONE', #4399, #4218, #3975, .T. ) ; +#7951 = CARTESIAN_POINT ( 'NONE', ( 34.40832046195265500, -31.11598463649643500, 26.51887142584770300 ) ) ; +#7952 = CARTESIAN_POINT ( 'NONE', ( 38.23952213881869300, -29.06213450135159700, 23.29608931577860900 ) ) ; +#7953 = AXIS2_PLACEMENT_3D ( 'NONE', #7601, #1489, #8631 ) ; +#7954 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#7955 = ORIENTED_EDGE ( 'NONE', *, *, #13021, .T. ) ; +#7956 = CARTESIAN_POINT ( 'NONE', ( 7.846135604280769700, -29.77243009138580000, 24.95678436132719100 ) ) ; +#7957 = CARTESIAN_POINT ( 'NONE', ( 11.42670254506606200, -20.93923507206910300, -24.67429710798633400 ) ) ; +#7958 = LOCAL_TIME ( 17, 45, 49.00000000000000000, #10637 ) ; +#7959 = CARTESIAN_POINT ( 'NONE', ( 10.59142958361658400, -31.11604929535903000, 26.51877735493491900 ) ) ; +#7960 = CARTESIAN_POINT ( 'NONE', ( 44.05697981325510400, 11.58840635499415800, -24.05697981325506200 ) ) ; +#7961 = ORIENTED_EDGE ( 'NONE', *, *, #11693, .F. ) ; +#7962 = CARTESIAN_POINT ( 'NONE', ( 38.82268056819693700, -30.66797812410296200, 22.31900020699186600 ) ) ; +#7963 = CARTESIAN_POINT ( 'NONE', ( 5.757992487696965300, -20.26414439021649700, -16.41100328174865900 ) ) ; +#7964 = CARTESIAN_POINT ( 'NONE', ( 36.00278707100838500, -29.63144370457534300, 25.64914603362388900 ) ) ; +#7965 = CARTESIAN_POINT ( 'NONE', ( 8.896262790369899400, -11.51466532823851100, 24.10069872553491200 ) ) ; +#7966 = CARTESIAN_POINT ( 'NONE', ( 32.50754335150045900, -23.71857923846563700, -25.42537777834470300 ) ) ; +#7967 = ORIENTED_EDGE ( 'NONE', *, *, #12231, .T. ) ; +#7968 = EDGE_CURVE ( 'NONE', #1238, #7774, #1923, .T. ) ; +#7969 = CARTESIAN_POINT ( 'NONE', ( 7.172760298540252300, -95.07595987345646900, 12.92966076384150800 ) ) ; +#7970 = CARTESIAN_POINT ( 'NONE', ( 24.88869901311451800, -33.86963066632296200, 20.79114009398124800 ) ) ; +#7971 = CARTESIAN_POINT ( 'NONE', ( 24.93866206969478600, -30.22764236918142800, 26.39475436447734000 ) ) ; +#7972 = VECTOR ( 'NONE', #1464, 1000.000000000000000 ) ; +#7973 = CARTESIAN_POINT ( 'NONE', ( 6.654539676213787800, -29.18752271156257900, 23.38258495621815000 ) ) ; +#7974 = CARTESIAN_POINT ( 'NONE', ( 5.631482770751694600, -29.39978470367390500, 10.84315608312443900 ) ) ; +#7975 = ORIENTED_EDGE ( 'NONE', *, *, #8560, .F. ) ; +#7976 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669240300, -0.9848077530122092400 ) ) ; +#7977 = CARTESIAN_POINT ( 'NONE', ( 11.44285392057183300, -30.96506487670671200, 27.03358110518682300 ) ) ; +#7978 = CARTESIAN_POINT ( 'NONE', ( 7.024987941177912800, -19.56346337689055700, 15.74120740826714200 ) ) ; +#7979 = CARTESIAN_POINT ( 'NONE', ( 35.04542615243869400, -20.77777100159770600, 19.18910313105473300 ) ) ; +#7980 = CARTESIAN_POINT ( 'NONE', ( 42.49890297944509900, -9.240536455385898400, -23.55289141356944400 ) ) ; +#7981 = CARTESIAN_POINT ( 'NONE', ( 32.25968113150166500, -30.70858613028425000, 27.62794287326860500 ) ) ; +#7982 = CARTESIAN_POINT ( 'NONE', ( 2.567368016344488500, -9.375634717929505900, 21.08016040501801000 ) ) ; +#7983 = CARTESIAN_POINT ( 'NONE', ( 2.434538368955051700, 12.00000000000000000, -22.82730815522424500 ) ) ; +#7984 = CARTESIAN_POINT ( 'NONE', ( 13.55996729326501600, -30.79329598724934100, 27.88260048235928000 ) ) ; +#7985 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-014, -10.00000000000000000, 25.00000000000000000 ) ) ; +#7986 = AXIS2_PLACEMENT_3D ( 'NONE', #11893, #11875, #11851 ) ; +#7987 = VECTOR ( 'NONE', #9348, 1000.000000000000000 ) ; +#7988 = CARTESIAN_POINT ( 'NONE', ( 9.860845523407885300, -31.15551601723386100, 26.03935117116004600 ) ) ; +#7989 = CARTESIAN_POINT ( 'NONE', ( 10.85792638601746800, -14.00540341109237900, -25.02004494096360400 ) ) ; +#7990 = CARTESIAN_POINT ( 'NONE', ( 24.98440222738251000, -25.57219343641019500, 22.25467052783105300 ) ) ; +#7991 = CARTESIAN_POINT ( 'NONE', ( 48.18314305175643900, -10.74770996088793000, 18.11134077736177900 ) ) ; +#7992 = CARTESIAN_POINT ( 'NONE', ( 6.047094498902886500, -28.87175910417848000, 21.75692909536254000 ) ) ; +#7993 = CARTESIAN_POINT ( 'NONE', ( 37.43251883541477600, -29.33414963087062300, 24.40340398588952600 ) ) ; +#7994 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2731, #2819, #2556, #2512, #2464, #2424, #2386, #5226, #5159, #5119, #2344, #2300 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.003579442175721861500, 0.007158884351443723000, 0.008948605439304653500, 0.01073832652716558500, 0.01431776870288743400 ), + .UNSPECIFIED. ) ; +#7995 = CARTESIAN_POINT ( 'NONE', ( 38.52305634945717100, -18.33469753388159900, -20.34352344542308100 ) ) ; +#7996 = CARTESIAN_POINT ( 'NONE', ( 34.16157744293827400, -30.55516224408087200, 26.85741666036017300 ) ) ; +#7997 = CARTESIAN_POINT ( 'NONE', ( 38.72269454704765200, -28.94925451029850900, 22.45362942090206500 ) ) ; +#7998 = VECTOR ( 'NONE', #12670, 1000.000000000000000 ) ; +#7999 = CARTESIAN_POINT ( 'NONE', ( 38.93606032306976100, -30.57197834063137900, 21.55062862772469100 ) ) ; +#8000 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000900, 17.50000000000000400 ) ) ; +#8001 = VERTEX_POINT ( 'NONE', #9034 ) ; +#8002 = CARTESIAN_POINT ( 'NONE', ( 8.319021005272656300, -31.09479320544011200, 24.85043940760893100 ) ) ; +#8003 = CARTESIAN_POINT ( 'NONE', ( 11.56823545798400400, -17.74343786743497700, -26.36537701946815600 ) ) ; +#8004 = CARTESIAN_POINT ( 'NONE', ( 13.25129813130640600, -30.87385896909838200, 27.77005979382549600 ) ) ; +#8005 = CARTESIAN_POINT ( 'NONE', ( 9.585179458286859200, -19.52263774277332300, -23.51349160229152000 ) ) ; +#8006 = CARTESIAN_POINT ( 'NONE', ( 43.75287673900311300, 11.66957896172735300, -22.75057534780069400 ) ) ; +#8007 = CARTESIAN_POINT ( 'NONE', ( 38.91481345832589500, -29.21230257441969500, 22.78558372410170900 ) ) ; +#8008 = CARTESIAN_POINT ( 'NONE', ( 36.16787794939050100, -30.47318289281978900, 25.73797855901059300 ) ) ; +#8009 = CARTESIAN_POINT ( 'NONE', ( 10.95992935783616100, -11.84638763161451400, 25.00000000000000000 ) ) ; +#8010 = CARTESIAN_POINT ( 'NONE', ( 35.57608275988610600, -20.60889496773300400, -22.44974117171122100 ) ) ; +#8011 = CARTESIAN_POINT ( 'NONE', ( 5.065068657213498900, -96.92158979223404500, 12.92967155385047600 ) ) ; +#8012 = CARTESIAN_POINT ( 'NONE', ( 1.923077867157690900, -7.589917725766175000, -22.76453746837018200 ) ) ; +#8013 = CARTESIAN_POINT ( 'NONE', ( 6.711567953514829400, -30.71080337969400600, 23.48982111604564000 ) ) ; +#8014 = FACE_OUTER_BOUND ( 'NONE', #2965, .T. ) ; +#8015 = CARTESIAN_POINT ( 'NONE', ( 5.425544459235234200, -30.79756603875803800, 9.733647318744866400 ) ) ; +#8016 = CARTESIAN_POINT ( 'NONE', ( 6.256871313281404700, -99.99999999999997200, 17.91973306516004500 ) ) ; +#8017 = CARTESIAN_POINT ( 'NONE', ( 11.43211636687209400, -30.55940699779761600, 27.12964230163835600 ) ) ; +#8018 = ADVANCED_FACE ( 'NONE', ( #4305 ), #1001, .T. ) ; +#8019 = CARTESIAN_POINT ( 'NONE', ( 5.596600355599653300, -19.75722849898324900, 12.30837235350254500 ) ) ; +#8021 = AXIS2_PLACEMENT_3D ( 'NONE', #2109, #2082, #2067 ) ; +#8020 = CARTESIAN_POINT ( 'NONE', ( 32.54738930289899200, -9.581938162965443000, -25.00000000000000000 ) ) ; +#8022 = CARTESIAN_POINT ( 'NONE', ( 32.25950659240614000, -30.86842955073427700, 27.59777557002058800 ) ) ; +#8023 = CARTESIAN_POINT ( 'NONE', ( 8.309795857537505300, -36.09178304385097400, 14.72543119225046100 ) ) ; +#8024 = CARTESIAN_POINT ( 'NONE', ( 11.76468657211109000, -30.38043359506271200, 27.27115626463331200 ) ) ; +#8025 = CARTESIAN_POINT ( 'NONE', ( 4.677578644340812300, -17.95390777617226900, -16.71904769113184800 ) ) ; +#8026 = CARTESIAN_POINT ( 'NONE', ( 13.66287944055174800, -30.83259374765395900, 27.90673852211982400 ) ) ; +#8027 = CARTESIAN_POINT ( 'NONE', ( 9.762662734869161700, -30.56673505865887800, 26.30635388823368400 ) ) ; +#8028 = CIRCLE ( 'NONE', #750, 2.499999999999998700 ) ; +#8029 = CARTESIAN_POINT ( 'NONE', ( 11.40575731456747600, -17.07142213206130800, -25.06701809440295000 ) ) ; +#8030 = CARTESIAN_POINT ( 'NONE', ( 42.27179043638405200, -10.65855581972837700, -21.12742242621833500 ) ) ; +#8031 = CARTESIAN_POINT ( 'NONE', ( 32.24492851533425900, -94.73843261911891000, 17.60637084629704700 ) ) ; +#8032 = CARTESIAN_POINT ( 'NONE', ( 5.222480312680057000, -30.12342321927240700, 21.60461012605761900 ) ) ; +#8033 = CARTESIAN_POINT ( 'NONE', ( 37.77951334131020600, -30.40311944777313600, 24.55091143434469100 ) ) ; +#8034 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #5898, #6901, #6946 ), + ( #858, #7989, #1867 ), + ( #9001, #2878, #10013 ), + ( #3880, #11023, #4915 ), + ( #12023, #5942, #12976 ), + ( #6998, #904, #8029 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.002057125866528310400, 0.004114251733056620800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9921686194339973700, 1.000000000000000000), + ( 1.000000000000000000, 0.9925918212417489400, 1.000000000000000000), + ( 1.000000000000000000, 0.9930442689265579500, 1.000000000000000000), + ( 1.000000000000000000, 0.9939120349690766500, 1.000000000000000000), + ( 1.000000000000000000, 0.9943248953152482600, 1.000000000000000000), + ( 1.000000000000000000, 0.9946465701320242900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#8035 = CARTESIAN_POINT ( 'NONE', ( 34.13008009954614200, -31.06315697907523100, 26.70145231147291300 ) ) ; +#8036 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#8037 = CYLINDRICAL_SURFACE ( 'NONE', #6774, 3.189999999999995100 ) ; +#8038 = CARTESIAN_POINT ( 'NONE', ( 2.465190328815661500E-030, -12.50000000000001600, 25.00105000000003800 ) ) ; +#8039 = CARTESIAN_POINT ( 'NONE', ( 8.103038596752488900, -30.20008198318609500, 25.26962966852559600 ) ) ; +#8040 = CARTESIAN_POINT ( 'NONE', ( 14.37094828903130100, -12.64964526993740400, -25.46720395039651000 ) ) ; +#8041 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8042 = CARTESIAN_POINT ( 'NONE', ( 39.16413237752333000, -30.38140888194636700, 22.58881060389961000 ) ) ; +#8043 = ORIENTED_EDGE ( 'NONE', *, *, #392, .T. ) ; +#8044 = EDGE_LOOP ( 'NONE', ( #5140, #5165, #5182, #5196, #5313 ) ) ; +#8045 = CARTESIAN_POINT ( 'NONE', ( 11.56107324188919700, -30.32830955681542700, 27.18372395385462100 ) ) ; +#8046 = VECTOR ( 'NONE', #1757, 1000.000000000000000 ) ; +#8047 = CARTESIAN_POINT ( 'NONE', ( 36.00236390318475800, -31.16780519966527100, 25.37764167971229400 ) ) ; +#8048 = CARTESIAN_POINT ( 'NONE', ( 34.51731524908584000, -15.53978248369210700, -24.93409746485374600 ) ) ; +#8049 = CARTESIAN_POINT ( 'NONE', ( 38.22997381317983200, -17.99610177741976000, -21.16130677705768200 ) ) ; +#8050 = CARTESIAN_POINT ( 'NONE', ( 37.75112014919220400, -95.03089605088733500, 10.29465736413584800 ) ) ; +#8051 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -39.52045731841469900, 19.79474689191102900 ) ) ; +#8052 = CARTESIAN_POINT ( 'NONE', ( 10.41269915881621300, -7.707617110150650300, -30.60411801834682400 ) ) ; +#8053 = ADVANCED_FACE ( 'NONE', ( #12398 ), #8809, .T. ) ; +#8054 = CARTESIAN_POINT ( 'NONE', ( 6.557409657754483600, -29.64378459242943400, 23.76513239338173400 ) ) ; +#8055 = CARTESIAN_POINT ( 'NONE', ( 5.054965323404566400, -28.44941163723079600, 13.30858559229642100 ) ) ; +#8056 = CARTESIAN_POINT ( 'NONE', ( 32.05501774890220900, -30.77742235348321400, 27.68824407554449300 ) ) ; +#8057 = CARTESIAN_POINT ( 'NONE', ( 5.460312666916086000, -99.99999999999998600, 17.45616585259672600 ) ) ; +#8058 = CARTESIAN_POINT ( 'NONE', ( 11.54810402276884700, -31.03666191990693700, 27.05088905733827100 ) ) ; +#8059 = ORIENTED_EDGE ( 'NONE', *, *, #2961, .F. ) ; +#8060 = CARTESIAN_POINT ( 'NONE', ( 5.132700599948642600, -19.88453064064783100, 10.05150789111265700 ) ) ; +#8061 = CARTESIAN_POINT ( 'NONE', ( 42.24139590435023500, -10.59239659820142200, 17.67046794653459700 ) ) ; +#8062 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #6108, #59, #7168 ), + ( #1067, #8191, #2076 ), + ( #9209, #3084, #10217 ), + ( #4093, #11236, #5121 ), + ( #12221, #6157, #102 ), + ( #7212, #1115, #8241 ), + ( #2120, #9254, #3127 ), + ( #10258, #4142, #11285 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 5.421010862427522200E-020, 0.001609795339845713400, 0.003219590679691426900, 0.006439181359382853800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9832216388489980500, 1.000000000000000000), + ( 1.000000000000000000, 0.9854729596091226200, 1.000000000000000000), + ( 1.000000000000000000, 0.9876378980531980200, 1.000000000000000000), + ( 1.000000000000000000, 0.9916273547321140500, 1.000000000000000000), + ( 1.000000000000000000, 0.9934590050436703500, 1.000000000000000000), + ( 1.000000000000000000, 0.9981028399636283600, 1.000000000000000000), + ( 1.000000000000000000, 0.9999936110844253000, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#8063 = CARTESIAN_POINT ( 'NONE', ( 33.20710267569625500, -10.53405517023074700, -25.04879091977760900 ) ) ; +#8064 = CARTESIAN_POINT ( 'NONE', ( 32.05543786561678100, -30.67974792709578200, 27.70191629557191200 ) ) ; +#8065 = CIRCLE ( 'NONE', #10079, 1.200000000000013500 ) ; +#8066 = CARTESIAN_POINT ( 'NONE', ( 5.085639599645796600, -28.81871679749349700, 8.129340881036409200 ) ) ; +#8067 = CARTESIAN_POINT ( 'NONE', ( 11.34577005808260900, -30.27185189294169400, 27.08383322766393800 ) ) ; +#8068 = CARTESIAN_POINT ( 'NONE', ( 5.913272501865974600, -22.91283112360731200, -17.28681025049915500 ) ) ; +#8069 = CARTESIAN_POINT ( 'NONE', ( 13.66310140395005700, -30.81685580108225500, 27.90957821314891500 ) ) ; +#8070 = CARTESIAN_POINT ( 'NONE', ( 9.860581300976464900, -29.86922296515513500, 26.26660591165360600 ) ) ; +#8071 = CARTESIAN_POINT ( 'NONE', ( 1.023244377779548400, -8.037320947001029800, 18.22075563183666700 ) ) ; +#8072 = CARTESIAN_POINT ( 'NONE', ( 5.412596425632799900, -29.82727380188591600, 19.13662948343522200 ) ) ; +#8073 = CARTESIAN_POINT ( 'NONE', ( 29.27111932795239800, -93.16752028771094300, 22.50621492200948400 ) ) ; +#8074 = EDGE_LOOP ( 'NONE', ( #10783, #8043, #661, #10494 ) ) ; +#8075 = CARTESIAN_POINT ( 'NONE', ( 5.785802057625053500, -28.99227152828087000, 21.80370183653677100 ) ) ; +#8076 = CARTESIAN_POINT ( 'NONE', ( 37.11291156678683500, -29.33549912641563400, 24.66106021306284300 ) ) ; +#8077 = VERTEX_POINT ( 'NONE', #13004 ) ; +#8078 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8079 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #7907, #6601, #1110, #1283 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.712388980384689700, 6.283185307179586200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#8080 = AXIS2_PLACEMENT_3D ( 'NONE', #1224, #1191, #1181 ) ; +#8081 = CARTESIAN_POINT ( 'NONE', ( 34.05263017176999800, -30.37710929382062400, 26.91369362788833200 ) ) ; +#8082 = CARTESIAN_POINT ( 'NONE', ( 0.5319178564575096600, -11.05974388846669000, 8.918944434305705800 ) ) ; +#8083 = ORIENTED_EDGE ( 'NONE', *, *, #2967, .T. ) ; +#8084 = CARTESIAN_POINT ( 'NONE', ( 12.67705525591765300, -9.562556682370384900, -24.99999999999999600 ) ) ; +#8085 = ORIENTED_EDGE ( 'NONE', *, *, #11046, .T. ) ; +#8086 = VERTEX_POINT ( 'NONE', #4945 ) ; +#8087 = CARTESIAN_POINT ( 'NONE', ( 8.507327037107527800, -31.15493131996584000, 24.95216067971834000 ) ) ; +#8088 = CARTESIAN_POINT ( 'NONE', ( 1.301042606982605100E-015, -10.00000588246303900, 7.945110309978687700 ) ) ; +#8089 = CARTESIAN_POINT ( 'NONE', ( 24.93866206969478900, -30.66176281334873400, 28.85677374700786400 ) ) ; +#8090 = VERTEX_POINT ( 'NONE', #12050 ) ; +#8091 = CARTESIAN_POINT ( 'NONE', ( 38.34920275072425300, -29.05950415549298100, 23.17517703133819400 ) ) ; +#8092 = CARTESIAN_POINT ( 'NONE', ( 11.34207788390511200, -30.27088295953325300, 27.08211600839787500 ) ) ; +#8093 = ORIENTED_EDGE ( 'NONE', *, *, #8226, .T. ) ; +#8094 = CARTESIAN_POINT ( 'NONE', ( 36.06885555147124500, -30.28786746492107100, 25.82022851956064700 ) ) ; +#8095 = CARTESIAN_POINT ( 'NONE', ( 24.98440633327290800, -25.57199632883141800, 22.25470525456795200 ) ) ; +#8096 = CARTESIAN_POINT ( 'NONE', ( 39.08672712386943700, -22.91283123025866400, -17.28681130537512100 ) ) ; +#8097 = ORIENTED_EDGE ( 'NONE', *, *, #12704, .F. ) ; +#8098 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -96.37138356748541000, 5.695220015075836500 ) ) ; +#8099 = CARTESIAN_POINT ( 'NONE', ( 20.19897118935766800, -9.999999999999992900, -31.88740907848004700 ) ) ; +#8100 = CARTESIAN_POINT ( 'NONE', ( 7.025876140181438200, -30.95296603884495600, 23.38811663159049900 ) ) ; +#8101 = CARTESIAN_POINT ( 'NONE', ( 5.985656216320207600, -29.89055330658701900, 11.82621063157220200 ) ) ; +#8102 = CARTESIAN_POINT ( 'NONE', ( 32.05554371486622500, -30.90267284316833200, 27.66118433606047200 ) ) ; +#8103 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999992000, -99.99999999999998600, 16.64953583563558600 ) ) ; +#8104 = CARTESIAN_POINT ( 'NONE', ( 11.52895097693667600, -30.67408534692945200, 27.15863941317372700 ) ) ; +#8105 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000900, 14.31000000000000900 ) ) ; +#8106 = CARTESIAN_POINT ( 'NONE', ( 8.150673312778598900, -12.49999999999999500, -14.28442702634330900 ) ) ; +#8107 = ORIENTED_EDGE ( 'NONE', *, *, #11473, .F. ) ; +#8108 = CARTESIAN_POINT ( 'NONE', ( 34.06451986559289200, -11.14201694039219100, -25.00000000000660400 ) ) ; +#8109 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#8110 = CARTESIAN_POINT ( 'NONE', ( 11.33184458795975400, -30.26819652359249700, 27.07735126598474200 ) ) ; +#8111 = CARTESIAN_POINT ( 'NONE', ( 6.054355657565863200, -20.31005384652586100, -17.21879767865630100 ) ) ; +#8112 = ORIENTED_EDGE ( 'NONE', *, *, #10793, .F. ) ; +#8113 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375500, -30.82654731344969800, 27.93780948130441300 ) ) ; +#8114 = CARTESIAN_POINT ( 'NONE', ( 9.337371715279854100, -17.38014697111649900, -29.60865546284308900 ) ) ; +#8115 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8116 = CARTESIAN_POINT ( 'NONE', ( 9.966970231383047700, -30.75414178889094400, 26.35996608208041200 ) ) ; +#8117 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -100.0000000000000300, -6.100827442047417100 ) ) ; +#8118 = CARTESIAN_POINT ( 'NONE', ( 38.62363627350777800, -15.23451195628510200, -22.77743429939849000 ) ) ; +#8119 = CARTESIAN_POINT ( 'NONE', ( 5.798056805426510300, -30.46638028079824100, 21.60668371243674100 ) ) ; +#8120 = CARTESIAN_POINT ( 'NONE', ( 37.46030750871793900, -30.20109131697817900, 24.87520451498045300 ) ) ; +#8121 = EDGE_LOOP ( 'NONE', ( #6952, #4522, #9968, #7607 ) ) ; +#8122 = VECTOR ( 'NONE', #10706, 1000.000000000000000 ) ; +#8123 = ADVANCED_FACE ( 'NONE', ( #3670 ), #939, .T. ) ; +#8124 = EDGE_CURVE ( 'NONE', #742, #11056, #12698, .T. ) ; +#8125 = LINE ( 'NONE', #11581, #2677 ) ; +#8126 = CARTESIAN_POINT ( 'NONE', ( 34.05262905760543600, -30.89858881660342500, 26.82174902188313900 ) ) ; +#8127 = CARTESIAN_POINT ( 'NONE', ( 32.10568929226722200, -28.69763550242474200, 27.91122426119196100 ) ) ; +#8128 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000004400, 12.00000000000000000, -22.50000000000000000 ) ) ; +#8129 = CARTESIAN_POINT ( 'NONE', ( 8.281788179152181700, -30.44943818077611700, 25.36327086661502200 ) ) ; +#8130 = CARTESIAN_POINT ( 'NONE', ( 9.596245812434514000, -10.28242044976680200, 24.95020165480229200 ) ) ; +#8131 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -8.819712763840412300, 7.988573107042497200 ) ) ; +#8132 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -8.819488904641351800, -11.50144947379146600 ) ) ; +#8133 = CARTESIAN_POINT ( 'NONE', ( 39.04270547213549500, -30.09287088311037900, 23.14247447980263700 ) ) ; +#8134 = FACE_BOUND ( 'NONE', #5848, .T. ) ; +#8135 = EDGE_LOOP ( 'NONE', ( #1262, #1716, #2006, #2336 ) ) ; +#8136 = CARTESIAN_POINT ( 'NONE', ( 11.32672235006328000, -30.26685108647282600, 27.07496203937500900 ) ) ; +#8137 = AXIS2_PLACEMENT_3D ( 'NONE', #2941, #647, #484 ) ; +#8138 = CARTESIAN_POINT ( 'NONE', ( 35.96157558426030200, -31.05833349288655800, 25.52782864351225800 ) ) ; +#8139 = CARTESIAN_POINT ( 'NONE', ( 29.36057497703445300, -28.10722049514003400, 27.02094924217197700 ) ) ; +#8140 = CARTESIAN_POINT ( 'NONE', ( 39.79270636924995600, -20.13805929574518300, -14.17820169002545100 ) ) ; +#8141 = EDGE_CURVE ( 'NONE', #7774, #10459, #10413, .T. ) ; +#8142 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -93.59664222890762600, 2.266305945995684900 ) ) ; +#8143 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -90.07596123493897300, -4.350951650170485700 ) ) ; +#8144 = CARTESIAN_POINT ( 'NONE', ( 12.45516445764767600, -9.581513386863489900, -25.00000000000000000 ) ) ; +#8145 = CARTESIAN_POINT ( 'NONE', ( 0.7049093404983621800, -10.00000000000000000, -17.05532529732341000 ) ) ; +#8146 = CARTESIAN_POINT ( 'NONE', ( 6.519227699013295100, -30.01410318435189600, 23.88649015197897200 ) ) ; +#8147 = CARTESIAN_POINT ( 'NONE', ( 5.444281121993285800, -26.40272028646634800, 10.75717662918894900 ) ) ; +#8148 = CARTESIAN_POINT ( 'NONE', ( 31.74740759992257500, -30.77521750471011000, 27.78941448742502400 ) ) ; +#8149 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#8150 = CARTESIAN_POINT ( 'NONE', ( 11.54815609444664500, -30.32522150110341000, 27.17621956993502200 ) ) ; +#8151 = LINE ( 'NONE', #2671, #374 ) ; +#8152 = CARTESIAN_POINT ( 'NONE', ( 14.41876323134068400, -12.50000000000000500, -21.63203926431318900 ) ) ; +#8153 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122091300, 0.1736481776669239500 ) ) ; +#8154 = CARTESIAN_POINT ( 'NONE', ( 11.31133890615039700, -30.26280813832982000, 27.06777368860322500 ) ) ; +#8155 = CARTESIAN_POINT ( 'NONE', ( 4.981671898944484600, -17.96259516100823100, -17.59054193830385800 ) ) ; +#8156 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344970100, 27.93780948130441300 ) ) ; +#8157 = CARTESIAN_POINT ( 'NONE', ( 40.21052164708838500, -19.57895670582314900, -8.028508014416758000 ) ) ; +#8158 = CARTESIAN_POINT ( 'NONE', ( 10.00941262875576100, -30.06867935704043000, 26.40719567786507200 ) ) ; +#8159 = CARTESIAN_POINT ( 'NONE', ( 37.42051596316366600, -12.50000000000001100, 10.98013580776463400 ) ) ; +#8160 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -99.99999999999998600, -40.86942826376123600 ) ) ; +#8161 = CARTESIAN_POINT ( 'NONE', ( 43.89804938587835900, -8.135035407090242600, 18.32941959489783900 ) ) ; +#8162 = CIRCLE ( 'NONE', #1595, 4.999999999999999100 ) ; +#8163 = CARTESIAN_POINT ( 'NONE', ( 5.232380513727295400, -29.32995566716157800, 21.80764456029015700 ) ) ; +#8164 = CARTESIAN_POINT ( 'NONE', ( 37.12739848286365400, -31.08741335015795600, 24.36779446483154700 ) ) ; +#8165 = ORIENTED_EDGE ( 'NONE', *, *, #12339, .T. ) ; +#8166 = CARTESIAN_POINT ( 'NONE', ( 20.14039441766890800, -33.35446909076586800, 26.50697697917620500 ) ) ; +#8167 = VECTOR ( 'NONE', #4042, 1000.000000000000000 ) ; +#8168 = CARTESIAN_POINT ( 'NONE', ( 33.84254848368752300, -30.25445895058195200, 26.99909880667198400 ) ) ; +#8169 = CARTESIAN_POINT ( 'NONE', ( 33.69042542074512900, -20.50594109313714200, 20.33279768224230500 ) ) ; +#8170 = CARTESIAN_POINT ( 'NONE', ( 0.9084284741217723000, -8.452784834690811900, 16.38149653183796100 ) ) ; +#8171 = CARTESIAN_POINT ( 'NONE', ( 8.497292431514560800, -29.52004736122803800, 25.25345282225225700 ) ) ; +#8172 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8173 = CARTESIAN_POINT ( 'NONE', ( 0.5288243528787584000, -11.05543369851204700, 8.184687442876446900 ) ) ; +#8174 = CARTESIAN_POINT ( 'NONE', ( 44.47286261989683700, -11.05304367308618700, -11.75470349880434100 ) ) ; +#8175 = CARTESIAN_POINT ( 'NONE', ( 37.01239689638041600, -31.43456527745475900, 22.93384712606942700 ) ) ; +#8176 = AXIS2_PLACEMENT_3D ( 'NONE', #12263, #12219, #12131 ) ; +#8177 = CARTESIAN_POINT ( 'NONE', ( 38.32465250519197800, -30.87296836994401200, 22.84933128486864700 ) ) ; +#8178 = CYLINDRICAL_SURFACE ( 'NONE', #4171, 4.999999999999997300 ) ; +#8179 = CARTESIAN_POINT ( 'NONE', ( 11.30108318791415600, -30.26010529761362700, 27.06296376172552300 ) ) ; +#8180 = CARTESIAN_POINT ( 'NONE', ( 35.82889693387123500, -29.97951288151506300, 25.91049246540772800 ) ) ; +#8181 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -20.52124915122249500, -9.023620054820146000 ) ) ; +#8182 = CARTESIAN_POINT ( 'NONE', ( 41.05127496065699700, -17.90633996083346300, -12.14699537880333200 ) ) ; +#8183 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -90.07596123493894400, -4.350951650170390600 ) ) ; +#8184 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999998200, -90.29970989198959300, -4.054995618405299300 ) ) ; +#8185 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000900, 18.70000000000001400 ) ) ; +#8186 = CARTESIAN_POINT ( 'NONE', ( 9.061018263309774700, -20.59706617870510600, -22.11137782829433000 ) ) ; +#8187 = ADVANCED_FACE ( 'NONE', ( #3362, #6064, #11496, #6397 ), #11104, .T. ) ; +#8188 = CARTESIAN_POINT ( 'NONE', ( 7.046891698636731100, -29.12954581075948500, 23.69532665084630500 ) ) ; +#8189 = CARTESIAN_POINT ( 'NONE', ( 5.671047629036512400, -31.68329557903130900, 10.47399332741983400 ) ) ; +#8190 = CARTESIAN_POINT ( 'NONE', ( 31.74809602027017900, -30.85770266544388100, 27.77382112492460200 ) ) ; +#8191 = CARTESIAN_POINT ( 'NONE', ( 0.8851564865992125300, -7.862961923639169000, 17.13804318096857300 ) ) ; +#8192 = CARTESIAN_POINT ( 'NONE', ( 11.72898710185786300, -30.76778872491885500, 27.22617478788979300 ) ) ; +#8193 = CARTESIAN_POINT ( 'NONE', ( 34.96386659179888300, -100.0000000000000100, -33.37087759187894400 ) ) ; +#8194 = CARTESIAN_POINT ( 'NONE', ( 33.79384265042256900, -12.91314080258604800, 24.48633467790140000 ) ) ; +#8195 = CARTESIAN_POINT ( 'NONE', ( 3.854141796508534500, -9.905646554942361300, 22.67720832028305400 ) ) ; +#8196 = CARTESIAN_POINT ( 'NONE', ( 2.926090862236878200, -10.73616710076742300, 17.81950147747433300 ) ) ; +#8197 = CARTESIAN_POINT ( 'NONE', ( 6.012725623639022700, -22.94039647512963100, -17.55955506420841800 ) ) ; +#8198 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344970100, 27.93780948130441300 ) ) ; +#8199 = CARTESIAN_POINT ( 'NONE', ( 41.05018658645033000, -17.89962682709925800, -11.53187062879840300 ) ) ; +#8200 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #11363, #3212, #5248 ), + ( #12345, #6287, #238 ), + ( #7343, #1241, #8365 ), + ( #2244, #9384, #3257 ), + ( #10391, #4268, #11415 ), + ( #5295, #12386, #6337 ), + ( #282, #7389, #1284 ), + ( #8422, #2280, #9429 ), + ( #3308, #10437, #4311 ), + ( #11462, #5345, #12429 ), + ( #6381, #333, #7437 ), + ( #1328, #8467, #2329 ), + ( #9471, #3348, #10483 ), + ( #4352, #11500, #5394 ), + ( #12472, #6426, #379 ), + ( #7483, #1372, #8508 ), + ( #2369, #9512, #3387 ), + ( #10525, #4397, #11543 ), + ( #5437, #12511, #6471 ), + ( #417, #7523, #1418 ), + ( #8549, #2406, #9557 ), + ( #3429, #10560, #4441 ), + ( #11586, #5479, #12552 ), + ( #6516, #453, #7564 ), + ( #1453, #8594, #2443 ), + ( #9596, #3472, #10604 ), + ( #4477, #11626, #5522 ), + ( #12587, #6555, #501 ), + ( #7605, #1493, #8634 ), + ( #2493, #9635, #3510 ), + ( #10644, #4519, #11666 ), + ( #5567, #12629, #6602 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.004636758949342865100, 0.006955138424014297200, 0.008114328161350013700, 0.009273517898685730200, 0.01159189737335716100, 0.01391027684802859400, 0.01622865632270002700, 0.01854703579737146000, 0.02086541527204289300, 0.02318379474671432300, 0.02550217422138575600, 0.02782055369605718900, 0.03013893317072862200, 0.03245731264540005500, 0.03709407159474292100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865472400, 1.000000000000000000), + ( 1.000000000000000000, 0.7075970115850837000, 1.000000000000000000), + ( 1.000000000000000000, 0.7089342781765667300, 1.000000000000000000), + ( 1.000000000000000000, 0.7125796301019339300, 1.000000000000000000), + ( 1.000000000000000000, 0.7140698102569641400, 1.000000000000000000), + ( 1.000000000000000000, 0.7168373401184200400, 1.000000000000000000), + ( 1.000000000000000000, 0.7178507260434138200, 1.000000000000000000), + ( 1.000000000000000000, 0.7200597284459039300, 1.000000000000000000), + ( 1.000000000000000000, 0.7212577850636610100, 1.000000000000000000), + ( 1.000000000000000000, 0.7251801945349228800, 1.000000000000000000), + ( 1.000000000000000000, 0.7282239506894577800, 1.000000000000000000), + ( 1.000000000000000000, 0.7355883659196668100, 1.000000000000000000), + ( 1.000000000000000000, 0.7399030273283554400, 1.000000000000000000), + ( 1.000000000000000000, 0.7505781663302310000, 1.000000000000000000), + ( 1.000000000000000000, 0.7569857375930947300, 1.000000000000000000), + ( 1.000000000000000000, 0.7725544161115288600, 1.000000000000000000), + ( 1.000000000000000000, 0.7817932707450691000, 1.000000000000000000), + ( 1.000000000000000000, 0.8032601027472535700, 1.000000000000000000), + ( 1.000000000000000000, 0.8154725684500630000, 1.000000000000000000), + ( 1.000000000000000000, 0.8413182052522203400, 1.000000000000000000), + ( 1.000000000000000000, 0.8549709358407310300, 1.000000000000000000), + ( 1.000000000000000000, 0.8813318193165836600, 1.000000000000000000), + ( 1.000000000000000000, 0.8940734682852774500, 1.000000000000000000), + ( 1.000000000000000000, 0.9178094688764045800, 1.000000000000000000), + ( 1.000000000000000000, 0.9288170236502080200, 1.000000000000000000), + ( 1.000000000000000000, 0.9486983996574589500, 1.000000000000000000), + ( 1.000000000000000000, 0.9575978644375760000, 1.000000000000000000), + ( 1.000000000000000000, 0.9728939500836455400, 1.000000000000000000), + ( 1.000000000000000000, 0.9793108764826818900, 1.000000000000000000), + ( 1.000000000000000000, 0.9947802711182225400, 1.000000000000000000), + ( 1.000000000000000000, 1.000014330393752100, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#8201 = EDGE_CURVE ( 'NONE', #11083, #6161, #5746, .T. ) ; +#8202 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8203 = CARTESIAN_POINT ( 'NONE', ( 10.38340892395992300, -31.00945675454133600, 26.46595632424021700 ) ) ; +#8204 = CARTESIAN_POINT ( 'NONE', ( 35.87584989280667700, -100.0000000000000300, 0.2290708660672488000 ) ) ; +#8205 = CARTESIAN_POINT ( 'NONE', ( 1.388906252245713200, -9.190216782848580100, -19.99252003159498200 ) ) ; +#8206 = CARTESIAN_POINT ( 'NONE', ( 42.25925417869265000, -10.57724190453639300, 17.65415203886041300 ) ) ; +#8207 = CARTESIAN_POINT ( 'NONE', ( 6.100436017366051000, -30.60702069086449100, 21.70062124698595000 ) ) ; +#8208 = VECTOR ( 'NONE', #2355, 1000.000000000000000 ) ; +#8209 = CARTESIAN_POINT ( 'NONE', ( 2.172691844775990400, 12.00000000000000000, -22.56546163104470200 ) ) ; +#8210 = AXIS2_PLACEMENT_3D ( 'NONE', #157, #7264, #1166 ) ; +#8211 = CARTESIAN_POINT ( 'NONE', ( 37.20781150322233100, -29.92011392658288900, 24.99055106193226900 ) ) ; +#8212 = CARTESIAN_POINT ( 'NONE', ( 5.177258394703756900, -28.50079510796588900, 16.80090606713346800 ) ) ; +#8213 = CARTESIAN_POINT ( 'NONE', ( 33.86632928125688100, -30.72735818877189500, 26.96827143265174000 ) ) ; +#8214 = CARTESIAN_POINT ( 'NONE', ( 34.11831076736903900, -26.96718508933676300, 18.94512813496102100 ) ) ; +#8215 = EDGE_LOOP ( 'NONE', ( #9504, #1671, #11554 ) ) ; +#8216 = ORIENTED_EDGE ( 'NONE', *, *, #6460, .F. ) ; +#8217 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999996400, -90.52530319079298200, -3.756600432583242700 ) ) ; +#8218 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122093500, -0.1736481776669231400 ) ) ; +#8219 = CARTESIAN_POINT ( 'NONE', ( 8.595973998211354300, -30.73473861618612400, 25.45339317152044600 ) ) ; +#8220 = VECTOR ( 'NONE', #9555, 1000.000000000000000 ) ; +#8221 = CARTESIAN_POINT ( 'NONE', ( 30.55680280254141200, -7.501151285203616400, -32.27477001445897300 ) ) ; +#8222 = EDGE_CURVE ( 'NONE', #12196, #4246, #687, .T. ) ; +#8223 = CARTESIAN_POINT ( 'NONE', ( 3.448053141940871400E-013, -9.970988499083000900, 8.827825028344918200 ) ) ; +#8224 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999801800, -9.952041303841960800, -12.55031764379000900 ) ) ; +#8225 = CARTESIAN_POINT ( 'NONE', ( 33.54005811973901500, -30.46248392939602900, 27.20179938571948200 ) ) ; +#8226 = EDGE_CURVE ( 'NONE', #1071, #8884, #8502, .T. ) ; +#8227 = CARTESIAN_POINT ( 'NONE', ( 38.82270926022150800, -29.82565660229460000, 23.43842310522018800 ) ) ; +#8228 = CARTESIAN_POINT ( 'NONE', ( 2.348062097728887300, -9.246820038818132300, 20.63071922339464600 ) ) ; +#8229 = ORIENTED_EDGE ( 'NONE', *, *, #4994, .T. ) ; +#8230 = CARTESIAN_POINT ( 'NONE', ( 35.86697316572877300, -30.76378634702769000, 25.82934287245313200 ) ) ; +#8231 = CARTESIAN_POINT ( 'NONE', ( 11.22957389873328900, -12.03584637474524900, -25.09262290919642500 ) ) ; +#8232 = CARTESIAN_POINT ( 'NONE', ( 39.99590916189595900, -22.33035665108712900, -11.58704566618442800 ) ) ; +#8233 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #10902, #11872, #705 ), + ( #4795, #11915, #5831 ), + ( #12872, #6877, #795 ), + ( #7912, #1791, #8933 ), + ( #2804, #9935, #3812 ), + ( #10951, #4839, #11954 ), + ( #5874, #12909, #6916 ), + ( #836, #7960, #1836 ), + ( #8974, #2851, #9983 ), + ( #3853, #10997, #4884 ), + ( #11994, #5915, #12946 ), + ( #6965, #873, #8006 ), + ( #1885, #9018, #2895 ), + ( #10028, #3899, #11038 ), + ( #4930, #12037, #5957 ), + ( #12989, #7017, #923 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 6.283185307179586200, 6.479534848028948500, 6.675884388878310800, 6.872233929727672200, 7.068583470577034500, 7.264933011426396800, 7.461282552275758200, 7.853981633974482800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865456900, 1.000000000000000000), + ( 1.000000000000000000, 0.7070717008705601500, 1.000000000000000000), + ( 1.000000000000000000, 0.7117460391534877800, 1.000000000000000000), + ( 1.000000000000000000, 0.7291288573898286900, 1.000000000000000000), + ( 1.000000000000000000, 0.7418334672881720100, 1.000000000000000000), + ( 1.000000000000000000, 0.7723967724090320400, 1.000000000000000000), + ( 1.000000000000000000, 0.7902180514827758000, 1.000000000000000000), + ( 1.000000000000000000, 0.8275942267605667100, 1.000000000000000000), + ( 1.000000000000000000, 0.8471316911967806700, 1.000000000000000000), + ( 1.000000000000000000, 0.8849191163720951900, 1.000000000000000000), + ( 1.000000000000000000, 0.9031651194661387500, 1.000000000000000000), + ( 1.000000000000000000, 0.9360421642202548800, 1.000000000000000000), + ( 1.000000000000000000, 0.9506740472589779700, 1.000000000000000000), + ( 1.000000000000000000, 0.9867291651255113400, 1.000000000000000000), + ( 1.000000000000000000, 1.000158598892051400, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#8234 = ORIENTED_EDGE ( 'NONE', *, *, #6406, .T. ) ; +#8235 = CARTESIAN_POINT ( 'NONE', ( 4.999999999998807200, -26.78671854973410400, 6.716753848522409400 ) ) ; +#8236 = CARTESIAN_POINT ( 'NONE', ( 2.303679926842177000, 11.99999998353632500, -22.69632007315714300 ) ) ; +#8237 = CARTESIAN_POINT ( 'NONE', ( 2.018579020134083600, -14.03715804026807700, 8.005331014629284400 ) ) ; +#8238 = CARTESIAN_POINT ( 'NONE', ( 6.711208273964094100, -30.32291616604608100, 24.03270615814114900 ) ) ; +#8239 = CARTESIAN_POINT ( 'NONE', ( 5.069376894286465400, -28.58846050321321600, 13.95428480444447500 ) ) ; +#8240 = CARTESIAN_POINT ( 'NONE', ( 31.64545225177576500, -30.75873685460887300, 27.82447300943972800 ) ) ; +#8241 = CARTESIAN_POINT ( 'NONE', ( 0.07543190979556735300, -6.005508333233158200, 16.81481899573558500 ) ) ; +#8242 = CARTESIAN_POINT ( 'NONE', ( 11.73945023985622200, -30.42974255385151100, 27.26146120656813900 ) ) ; +#8243 = CARTESIAN_POINT ( 'NONE', ( 31.21906349191142000, -15.83684665421363900, 23.97080645260423600 ) ) ; +#8244 = VERTEX_POINT ( 'NONE', #5080 ) ; +#8245 = ORIENTED_EDGE ( 'NONE', *, *, #6054, .T. ) ; +#8246 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#8247 = CARTESIAN_POINT ( 'NONE', ( 2.627471892879916100, -9.495533737099215400, 18.62393208677421800 ) ) ; +#8248 = CARTESIAN_POINT ( 'NONE', ( 6.160657075946537600, -20.32524516593429500, -17.48560232383302100 ) ) ; +#8249 = ORIENTED_EDGE ( 'NONE', *, *, #11979, .T. ) ; +#8250 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, -20.68999999999999400 ) ) ; +#8251 = CARTESIAN_POINT ( 'NONE', ( 6.021759350843516300, -12.41554979639732200, 20.68486388797860400 ) ) ; +#8252 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5061, #5142, #5030, #5011, #4965, #4938 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.5000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#8253 = CARTESIAN_POINT ( 'NONE', ( 10.35310493972905900, -30.40916335060563100, 26.62907902964807900 ) ) ; +#8254 = CARTESIAN_POINT ( 'NONE', ( 31.66022420043982400, -12.50000000000001100, 20.10951738340593700 ) ) ; +#8255 = CARTESIAN_POINT ( 'NONE', ( 40.86882275535622000, -10.10761578288782300, 20.29183011283383600 ) ) ; +#8256 = VERTEX_POINT ( 'NONE', #2030 ) ; +#8257 = CARTESIAN_POINT ( 'NONE', ( 5.036608688006214000, -29.69240527200446800, 21.85384004591018200 ) ) ; +#8258 = CARTESIAN_POINT ( 'NONE', ( 11.45962687091372300, -16.77071042902326800, -25.11199310454563600 ) ) ; +#8259 = CARTESIAN_POINT ( 'NONE', ( 37.12229905131530200, -30.86017342213440500, 24.73053493708646000 ) ) ; +#8260 = EDGE_LOOP ( 'NONE', ( #3281, #6466, #6804, #8417, #8869, #9186, #3106, #10458 ) ) ; +#8261 = VERTEX_POINT ( 'NONE', #7119 ) ; +#8262 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -27.09143239524033600, 6.754920151478383000 ) ) ; +#8263 = ADVANCED_FACE ( 'NONE', ( #3043 ), #8062, .F. ) ; +#8264 = CARTESIAN_POINT ( 'NONE', ( 33.74261140393124200, -30.24859645625906200, 27.04283685449132700 ) ) ; +#8265 = CARTESIAN_POINT ( 'NONE', ( 39.34593217413724600, -28.83317293315344200, 20.54694691614711000 ) ) ; +#8266 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -90.97335171977771000, -3.161179035379571500 ) ) ; +#8267 = VERTEX_POINT ( 'NONE', #12179 ) ; +#8268 = CARTESIAN_POINT ( 'NONE', ( 8.647045908359562100, -29.86007888287032900, 25.53849083708845000 ) ) ; +#8269 = CARTESIAN_POINT ( 'NONE', ( 40.36103754473830900, -7.745554263288574300, -26.21788207784175000 ) ) ; +#8270 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -8.393921138885128000, 10.58992220731804700 ) ) ; +#8271 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999996400, -8.300346101406672600, -14.43606694067667300 ) ) ; +#8272 = CARTESIAN_POINT ( 'NONE', ( 27.80230289955286000, -33.06212212019124100, 28.26783952480305800 ) ) ; +#8273 = ORIENTED_EDGE ( 'NONE', *, *, #10664, .T. ) ; +#8274 = CARTESIAN_POINT ( 'NONE', ( 38.26836579475728700, -30.86512998211763700, 23.05778038376239900 ) ) ; +#8275 = CARTESIAN_POINT ( 'NONE', ( 11.27026287931246900, -30.25197149175207300, 27.04845748473319500 ) ) ; +#8276 = CARTESIAN_POINT ( 'NONE', ( 35.67006233351987300, -29.74339465736486300, 25.90990916223639600 ) ) ; +#8277 = CARTESIAN_POINT ( 'NONE', ( 12.55545948087821600, -10.37682758575374800, -25.06434885924024800 ) ) ; +#8278 = ORIENTED_EDGE ( 'NONE', *, *, #12109, .T. ) ; +#8279 = EDGE_CURVE ( 'NONE', #11976, #5024, #6967, .T. ) ; +#8280 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -91.19670008258957200, -2.862972244136633200 ) ) ; +#8281 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#8282 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669231400, 0.9848077530122093500 ) ) ; +#8283 = CARTESIAN_POINT ( 'NONE', ( 34.68512503879492900, -18.79660145256282500, -24.27929664393954200 ) ) ; +#8284 = VERTEX_POINT ( 'NONE', #7253 ) ; +#8285 = CARTESIAN_POINT ( 'NONE', ( 7.125592827074752800, -29.22445062232353800, 23.89597741419405400 ) ) ; +#8286 = CARTESIAN_POINT ( 'NONE', ( 6.192302133273443600, -30.11710550026604200, 12.31106729370394200 ) ) ; +#8287 = CARTESIAN_POINT ( 'NONE', ( 31.64477841094821300, -30.82468763149465100, 27.81355398371982400 ) ) ; +#8288 = CARTESIAN_POINT ( 'NONE', ( 34.90707727875532400, -10.00000000000000000, 25.00000000000000000 ) ) ; +#8289 = CARTESIAN_POINT ( 'NONE', ( 11.83441641080529300, -30.90323083694776300, 27.23161476361964600 ) ) ; +#8290 = CARTESIAN_POINT ( 'NONE', ( 28.46109214256225800, -18.06245828071966700, 23.57837107427280500 ) ) ; +#8291 = CARTESIAN_POINT ( 'NONE', ( 38.95103163825580600, -30.55025571725973800, 21.46135594237983200 ) ) ; +#8292 = DATE_TIME_ROLE ( 'classification_date' ) ; +#8293 = EDGE_LOOP ( 'NONE', ( #9357, #9386 ) ) ; +#8294 = CARTESIAN_POINT ( 'NONE', ( 11.20836072578115900, -30.23559957311056900, 27.01911616350461300 ) ) ; +#8295 = CARTESIAN_POINT ( 'NONE', ( 5.091183668197301100, -17.96544586672003900, -17.87851440761524200 ) ) ; +#8296 = CARTESIAN_POINT ( 'NONE', ( 44.47162557445474100, -11.05624145208529400, 8.118562969363118500 ) ) ; +#8297 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -99.99999999999998600, 15.71686712626637400 ) ) ; +#8298 = CARTESIAN_POINT ( 'NONE', ( 17.03867488856406000, -31.29892962639993600, 28.59572076646743700 ) ) ; +#8299 = LINE ( 'NONE', #1337, #2520 ) ; +#8300 = CARTESIAN_POINT ( 'NONE', ( 10.59116564517184700, -31.11459588887728600, 26.51955452799172300 ) ) ; +#8301 = CARTESIAN_POINT ( 'NONE', ( 26.65800171406234800, -100.0000000000000300, 6.546524093470328200 ) ) ; +#8302 = ORIENTED_EDGE ( 'NONE', *, *, #9795, .T. ) ; +#8303 = CARTESIAN_POINT ( 'NONE', ( 38.95483913512720900, -10.23567059506993400, -24.61416586346537700 ) ) ; +#8304 = CARTESIAN_POINT ( 'NONE', ( 41.03619277887545300, -9.916582126697553800, 23.83467294925572600 ) ) ; +#8305 = CARTESIAN_POINT ( 'NONE', ( 6.102200956097607200, -28.89903455374922800, 22.00210151625878300 ) ) ; +#8306 = CARTESIAN_POINT ( 'NONE', ( 36.71547051701414000, -29.59744439979524700, 25.15763274658402400 ) ) ; +#8307 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.734723475976807300E-016 ) ) ; +#8308 = EDGE_CURVE ( 'NONE', #4951, #11089, #4559, .T. ) ; +#8309 = CARTESIAN_POINT ( 'NONE', ( 33.76824676952252700, -30.63236186603265700, 27.03230324218513700 ) ) ; +#8310 = CARTESIAN_POINT ( 'NONE', ( 38.73721647637307100, -23.03508306320157900, 13.64223878772902600 ) ) ; +#8311 = VECTOR ( 'NONE', #1997, 1000.000000000000000 ) ; +#8312 = CARTESIAN_POINT ( 'NONE', ( 0.5278691658340004500, -11.05573833166792000, -11.53187062879840900 ) ) ; +#8313 = CARTESIAN_POINT ( 'NONE', ( 8.783856172880975400, -31.05395726258411700, 25.32524773884518200 ) ) ; +#8314 = CARTESIAN_POINT ( 'NONE', ( 9.141039364328223700, -95.07596123493895800, 5.345650428365160200 ) ) ; +#8315 = CARTESIAN_POINT ( 'NONE', ( 44.29509065950166800, -9.999999999999996400, -17.05532529732335300 ) ) ; +#8316 = CARTESIAN_POINT ( 'NONE', ( 0.8181439876787004500, -9.148064852552778300, 15.20302630315768900 ) ) ; +#8317 = CARTESIAN_POINT ( 'NONE', ( 44.12541379145000100, -8.142800289379758600, -20.10297885354996300 ) ) ; +#8318 = CARTESIAN_POINT ( 'NONE', ( 38.34376042452902300, -29.48897911715436800, 23.73743199464063700 ) ) ; +#8319 = AXIS2_PLACEMENT_3D ( 'NONE', #4909, #4774, #4755 ) ; +#8320 = CARTESIAN_POINT ( 'NONE', ( 35.80187664218500700, -30.54266263080981500, 25.96904915154451400 ) ) ; +#8321 = CARTESIAN_POINT ( 'NONE', ( 10.08968769258033800, -20.02735520972428100, -23.79951658158804800 ) ) ; +#8322 = ORIENTED_EDGE ( 'NONE', *, *, #2805, .F. ) ; +#8323 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -94.71799171675967000, 18.78817770588234000 ) ) ; +#8324 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999996400, -91.86267603409064000, -1.965365239441874100 ) ) ; +#8325 = ADVANCED_FACE ( 'NONE', ( #10537 ), #2224, .F. ) ; +#8326 = CARTESIAN_POINT ( 'NONE', ( 6.960735050152824700, -30.69114087213711900, 23.92420388835103000 ) ) ; +#8327 = CARTESIAN_POINT ( 'NONE', ( 5.815315731398424500, -32.11798959397761900, 10.84415656343876400 ) ) ; +#8328 = CARTESIAN_POINT ( 'NONE', ( 31.44021999284758800, -30.78700480006075000, 27.88358034239332600 ) ) ; +#8329 = CARTESIAN_POINT ( 'NONE', ( 24.85960462362703200, -27.96255689439421800, 27.45771657700753100 ) ) ; +#8330 = CARTESIAN_POINT ( 'NONE', ( 11.83086981867760400, -30.58814677664209100, 27.29556301542160000 ) ) ; +#8331 = CARTESIAN_POINT ( 'NONE', ( 24.99999999386482900, -19.13172188299338600, 23.38983105170242300 ) ) ; +#8332 = CARTESIAN_POINT ( 'NONE', ( 39.89699239340938400, -29.45205120845470500, 21.72342052648664500 ) ) ; +#8333 = CARTESIAN_POINT ( 'NONE', ( 11.06211394273192500, -30.19667891242874800, 26.94830832554606600 ) ) ; +#8334 = CARTESIAN_POINT ( 'NONE', ( 6.227298770448302700, -22.99490726020986400, -18.10091142163348000 ) ) ; +#8335 = ADVANCED_FACE ( 'NONE', ( #2402 ), #12973, .T. ) ; +#8336 = CARTESIAN_POINT ( 'NONE', ( 44.31300556110301200, -10.08349252413230000, 13.11723877353348700 ) ) ; +#8337 = CARTESIAN_POINT ( 'NONE', ( 10.54175201920896400, -30.58744728985314900, 26.70999378867824700 ) ) ; +#8338 = LINE ( 'NONE', #11150, #10689 ) ; +#8339 = CARTESIAN_POINT ( 'NONE', ( 24.85960462362703200, -27.96255689439421800, 27.45771657700753100 ) ) ; +#8340 = CARTESIAN_POINT ( 'NONE', ( 30.11949472514225700, -30.78998084601647600, 28.24575809354105300 ) ) ; +#8341 = CARTESIAN_POINT ( 'NONE', ( 36.11300400385782400, -12.57765825713849100, 23.20548594696495200 ) ) ; +#8342 = CARTESIAN_POINT ( 'NONE', ( 5.161178555820292500, -30.03640899901563100, 21.84735176443459200 ) ) ; +#8343 = CARTESIAN_POINT ( 'NONE', ( 5.711906953325605100, -26.26864060678720100, 11.72441019050170400 ) ) ; +#8344 = PLANE ( 'NONE', #9263 ) ; +#8345 = CARTESIAN_POINT ( 'NONE', ( 36.89085961931107200, -30.53787190678273300, 25.20349219345288100 ) ) ; +#8346 = CARTESIAN_POINT ( 'NONE', ( 19.16691576264560500, -100.0000000000000100, 6.630571736238759500 ) ) ; +#8347 = EDGE_LOOP ( 'NONE', ( #7307, #7453, #7639, #7786, #7955, #8093, #8278, #8443 ) ) ; +#8348 = CARTESIAN_POINT ( 'NONE', ( 28.16469617673654100, -19.15128972858122200, 23.04404275233439800 ) ) ; +#8349 = CARTESIAN_POINT ( 'NONE', ( 33.74386113586059100, -31.05322909983394900, 26.90374905867138400 ) ) ; +#8350 = CARTESIAN_POINT ( 'NONE', ( 39.90947354459542900, -26.72172102672044900, 8.782065803121630800 ) ) ; +#8351 = CARTESIAN_POINT ( 'NONE', ( 10.93373764452249700, -30.16212277656153200, 26.88344619254876000 ) ) ; +#8352 = VECTOR ( 'NONE', #968, 1000.000000000000000 ) ; +#8353 = CARTESIAN_POINT ( 'NONE', ( 19.89693543307430800, -19.87568216611874300, 23.25829123793062100 ) ) ; +#8354 = CARTESIAN_POINT ( 'NONE', ( 8.659710858744153600, -30.24565836142626600, 25.63952763006603800 ) ) ; +#8355 = CARTESIAN_POINT ( 'NONE', ( 24.80102881064234000, -9.999999999999994700, -31.88740907848006900 ) ) ; +#8356 = CARTESIAN_POINT ( 'NONE', ( 5.557763449613100100, -8.396104514270533100, -24.95341261608613300 ) ) ; +#8357 = EDGE_CURVE ( 'NONE', #9952, #1574, #12833, .T. ) ; +#8358 = CARTESIAN_POINT ( 'NONE', ( 38.34377418680504200, -30.64669687465912800, 23.53259056224663600 ) ) ; +#8359 = CIRCLE ( 'NONE', #6954, 7.499999999999996400 ) ; +#8360 = CARTESIAN_POINT ( 'NONE', ( 35.66350360409957400, -31.16900508034537200, 25.64859076151172700 ) ) ; +#8361 = CARTESIAN_POINT ( 'NONE', ( 12.33109834770089600, -97.48853244367761300, 20.98017711554428300 ) ) ; +#8362 = CARTESIAN_POINT ( 'NONE', ( 31.80374105624106900, -95.07596123493894400, 15.82717526022925000 ) ) ; +#8363 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -92.30125013851261400, -1.362989883637487600 ) ) ; +#8364 = CARTESIAN_POINT ( 'NONE', ( 17.05545213350741200, -19.98349678256212800, 22.95456482962059800 ) ) ; +#8365 = CARTESIAN_POINT ( 'NONE', ( 27.07071173932292000, -39.41424078494812000, 19.70383002183603000 ) ) ; +#8366 = CARTESIAN_POINT ( 'NONE', ( 6.960731984889767100, -29.58107269440618800, 24.11995317837714500 ) ) ; +#8367 = CARTESIAN_POINT ( 'NONE', ( 5.108686803936256700, -28.86880190225019800, 15.22480331321646000 ) ) ; +#8368 = CARTESIAN_POINT ( 'NONE', ( 31.43939748937063400, -30.81734566204249100, 27.87866819834863100 ) ) ; +#8369 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #9639, #5570, #7651 ), + ( #1540, #8680, #2542 ), + ( #9684, #3556, #10688 ), + ( #4569, #11713, #5609 ), + ( #12675, #6653, #578 ), + ( #7693, #1588, #8722 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( 0.001039078685621124000, 0.002723781383604634800, 0.004408484081588145800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.6364262416083855700, 1.000000000000000000), + ( 1.000000000000000000, 0.6473027213889378500, 1.000000000000000000), + ( 1.000000000000000000, 0.6587418687616077900, 1.000000000000000000), + ( 1.000000000000000000, 0.6826418829012814700, 1.000000000000000000), + ( 1.000000000000000000, 0.6949283038810062400, 1.000000000000000000), + ( 1.000000000000000000, 0.7075584866149391400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#8370 = CARTESIAN_POINT ( 'NONE', ( 43.88344498325054800, -8.818943118304433800, -19.81238863952253800 ) ) ; +#8371 = CARTESIAN_POINT ( 'NONE', ( 12.13820830221808000, -30.97492835177883900, 27.33454252803886000 ) ) ; +#8372 = VERTEX_POINT ( 'NONE', #7395 ) ; +#8373 = EDGE_LOOP ( 'NONE', ( #3614, #3741, #3754, #3894, #4019 ) ) ; +#8374 = AXIS2_PLACEMENT_3D ( 'NONE', #538, #7649, #1538 ) ; +#8375 = CARTESIAN_POINT ( 'NONE', ( 44.97728311148466700, -5.551546817807540000, -19.57319112087381200 ) ) ; +#8376 = CARTESIAN_POINT ( 'NONE', ( 39.13261671744705700, -30.48850664664491100, 21.54018838524826400 ) ) ; +#8377 = LINE ( 'NONE', #13031, #8046 ) ; +#8378 = CARTESIAN_POINT ( 'NONE', ( 10.67318422318378000, -30.09153811121377900, 26.74774909633361000 ) ) ; +#8379 = CARTESIAN_POINT ( 'NONE', ( 6.388331940576067700, -20.35526521651497900, -18.01395029627517600 ) ) ; +#8380 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.22554797644824000, 15.70939352957158300 ) ) ; +#8381 = EDGE_CURVE ( 'NONE', #6842, #9374, #56, .T. ) ; +#8382 = CARTESIAN_POINT ( 'NONE', ( 42.12022686183672000, -9.533448578643488600, 21.71158600382881300 ) ) ; +#8383 = CARTESIAN_POINT ( 'NONE', ( 10.59129476926107400, -30.07001480933630300, 26.70349356177267800 ) ) ; +#8384 = CARTESIAN_POINT ( 'NONE', ( 25.04568490267499900, -28.77949532703398100, 29.18866828975544800 ) ) ; +#8385 = CARTESIAN_POINT ( 'NONE', ( 0.1776462003197170300, -6.355766553367099700, -19.89155665953781600 ) ) ; +#8386 = ORIENTED_EDGE ( 'NONE', *, *, #11457, .F. ) ; +#8387 = CARTESIAN_POINT ( 'NONE', ( 5.928181104740256800, -28.98270986190426500, 22.03993024713292600 ) ) ; +#8388 = CARTESIAN_POINT ( 'NONE', ( 6.650578382374835200, -30.51463762188532100, 13.24633071365516400 ) ) ; +#8389 = CARTESIAN_POINT ( 'NONE', ( 16.49953127096480500, -20.01384545781165200, 22.81373943744575400 ) ) ; +#8390 = CARTESIAN_POINT ( 'NONE', ( 36.49288786170858100, -29.49811654424503300, 25.24505256529525400 ) ) ; +#8391 = FACE_OUTER_BOUND ( 'NONE', #11424, .T. ) ; +#8392 = CARTESIAN_POINT ( 'NONE', ( 11.71221654547091100, -100.0000000000000100, 3.438986161326957000 ) ) ; +#8393 = CARTESIAN_POINT ( 'NONE', ( 31.84351175469251400, -19.22728455571281700, 21.69768226357108200 ) ) ; +#8394 = ADVANCED_FACE ( 'NONE', ( #5099 ), #10697, .T. ) ; +#8395 = CARTESIAN_POINT ( 'NONE', ( 33.56646974763041400, -30.52905103798180500, 27.13193576768006600 ) ) ; +#8396 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -90.07596123493895800, -4.350951650170483900 ) ) ; +#8397 = CARTESIAN_POINT ( 'NONE', ( 10.49440653907308500, -30.04250850788748700, 26.64932438560446900 ) ) ; +#8398 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -93.58403201463147500, 0.4683135292907864000 ) ) ; +#8399 = DIRECTION ( 'NONE', ( 0.02351536899748427400, -0.9997234754775503600, 0.0000000000000000000 ) ) ; +#8400 = CARTESIAN_POINT ( 'NONE', ( 12.13537256353361800, -30.53431467278073400, 27.41964448841404000 ) ) ; +#8401 = EDGE_LOOP ( 'NONE', ( #7726, #8702, #8899, #9010, #9177, #9381 ) ) ; +#8402 = CARTESIAN_POINT ( 'NONE', ( 8.997348042216186700, -31.16790833260326500, 25.37760725675569500 ) ) ; +#8403 = CARTESIAN_POINT ( 'NONE', ( 31.82735840595894000, -20.77539050733610500, -25.27113395899303000 ) ) ; +#8404 = CARTESIAN_POINT ( 'NONE', ( 4.262762267507390100E-014, -9.999963517103708500, -11.57189424413095200 ) ) ; +#8405 = CARTESIAN_POINT ( 'NONE', ( 38.82534251860253200, -10.05323932975528600, 25.00000000000000400 ) ) ; +#8406 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, -18.70000000000001400 ) ) ; +#8407 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #11718, #11793, #11834 ), + ( #11672, #11635, #11595 ), + ( #11552, #11509, #11471 ), + ( #11426, #11377, #11333 ), + ( #11291, #11244, #11199 ), + ( #11154, #11113, #11065 ), + ( #10956, #10906, #10862 ), + ( #10824, #10782, #10692 ), + ( #10652, #10613, #10568 ), + ( #10532, #10493, #10446 ), + ( #10401, #10355, #10309 ), + ( #10266, #10223, #10181 ), + ( #10131, #10086, #9986 ), + ( #9940, #9898, #9857 ), + ( #9813, #9768, #9687 ), + ( #9643, #9604, #9567 ), + ( #9524, #9479, #9437 ), + ( #9216, #9169, #8979 ), + ( #8967, #8938, #8892 ), + ( #8813, #8771, #8726 ), + ( #8684, #8641, #8604 ), + ( #8556, #8516, #8479 ), + ( #8433, #8379, #8334 ), + ( #8295, #8248, #8197 ), + ( #8155, #8111, #8068 ), + ( #8025, #7963, #7698 ), + ( #7657, #7570, #9395 ), + ( #9343, #9300, #7445 ), + ( #7309, #7262, #7218 ), + ( #7174, #7127, #7083 ), + ( #7040, #6969, #6881 ), + ( #6838, #6787, #6746 ), + ( #6704, #6657, #6610 ), + ( #6524, #2964, #2917 ), + ( #2855, #6481, #6435 ), + ( #6393, #6344, #6298 ), + ( #6251, #6208, #6164 ), + ( #6115, #6072, #6029 ), + ( #5790, #5749, #5710 ), + ( #5574, #5530, #5487 ), + ( #5447, #5405, #5357 ), + ( #5306, #5257, #5168 ), + ( #5126, #5086, #4992 ), + ( #4954, #4888, #4661 ), + ( #4617, #4573, #4528 ), + ( #4486, #4447, #4360 ), + ( #4319, #4280, #4188 ), + ( #4051, #3963, #3921 ), + ( #3858, #3815, #3769 ), + ( #3726, #12392, #12716 ), + ( #12557, #3691, #3654 ), + ( #3608, #3562, #3518 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.03035818745613320600, 0.03316785727570862500, 0.03457269218549632900, 0.03597752709528404000, 0.03878719691485945500, 0.04159686673443487000, 0.04721620637358570100, 0.05002587619316111600, 0.05143071110294882000, 0.05283554601273653100, 0.05845488565188736200, 0.05985972056167507300, 0.06126455547146277700, 0.06407422529103819200, 0.06688389511061360000, 0.06828873002040131100, 0.06969356493018902300, 0.07004477365763595000, 0.07013257583949768200, 0.07015452638496311200, 0.07017647693042855500, 0.07022037802135941400, 0.07039598238508287800, 0.07109839983997673400, 0.07250323474976444500, 0.07531290456933985300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9553474518467870400, 1.000000000000000000), + ( 1.000000000000000000, 0.9553393296349929100, 1.000000000000000000), + ( 1.000000000000000000, 0.9553746227975528100, 1.000000000000000000), + ( 1.000000000000000000, 0.9554944664064392000, 1.000000000000000000), + ( 1.000000000000000000, 0.9555458371235262500, 1.000000000000000000), + ( 1.000000000000000000, 0.9556698088268967800, 1.000000000000000000), + ( 1.000000000000000000, 0.9557424098905408200, 1.000000000000000000), + ( 1.000000000000000000, 0.9559910524979641200, 1.000000000000000000), + ( 1.000000000000000000, 0.9561977558002596700, 1.000000000000000000), + ( 1.000000000000000000, 0.9566922037261158500, 1.000000000000000000), + ( 1.000000000000000000, 0.9569801730234359600, 1.000000000000000000), + ( 1.000000000000000000, 0.9579609530969051000, 1.000000000000000000), + ( 1.000000000000000000, 0.9587486277082991600, 1.000000000000000000), + ( 1.000000000000000000, 0.9601004224759559500, 1.000000000000000000), + ( 1.000000000000000000, 0.9605800600460030500, 1.000000000000000000), + ( 1.000000000000000000, 0.9613423559689607800, 1.000000000000000000), + ( 1.000000000000000000, 0.9616035702618076500, 1.000000000000000000), + ( 1.000000000000000000, 0.9621326032516835900, 1.000000000000000000), + ( 1.000000000000000000, 0.9624012709954883300, 1.000000000000000000), + ( 1.000000000000000000, 0.9637644566448222400, 1.000000000000000000), + ( 1.000000000000000000, 0.9649187333479223300, 1.000000000000000000), + ( 1.000000000000000000, 0.9664266480033197900, 1.000000000000000000), + ( 1.000000000000000000, 0.9667318420321726600, 1.000000000000000000), + ( 1.000000000000000000, 0.9673415278163457500, 1.000000000000000000), + ( 1.000000000000000000, 0.9676466667786484100, 1.000000000000000000), + ( 1.000000000000000000, 0.9685625218145531600, 1.000000000000000000), + ( 1.000000000000000000, 0.9691736304673259600, 1.000000000000000000), + ( 1.000000000000000000, 0.9703972069623862900, 1.000000000000000000), + ( 1.000000000000000000, 0.9710098965612232700, 1.000000000000000000), + ( 1.000000000000000000, 0.9719280253277707800, 1.000000000000000000), + ( 1.000000000000000000, 0.9722341781710397400, 1.000000000000000000), + ( 1.000000000000000000, 0.9728404091081803700, 1.000000000000000000), + ( 1.000000000000000000, 0.9731412536815214900, 1.000000000000000000), + ( 1.000000000000000000, 0.9735146911500988100, 1.000000000000000000), + ( 1.000000000000000000, 0.9735892479637809900, 1.000000000000000000), + ( 1.000000000000000000, 0.9736822846247601400, 1.000000000000000000), + ( 1.000000000000000000, 0.9737008839899160600, 1.000000000000000000), + ( 1.000000000000000000, 0.9737241233018881800, 1.000000000000000000), + ( 1.000000000000000000, 0.9737296217950810500, 1.000000000000000000), + ( 1.000000000000000000, 0.9737364694914567600, 1.000000000000000000), + ( 1.000000000000000000, 0.9737398648517832100, 1.000000000000000000), + ( 1.000000000000000000, 0.9737499654350699800, 1.000000000000000000), + ( 1.000000000000000000, 0.9737565851605456400, 1.000000000000000000), + ( 1.000000000000000000, 0.9737891133466147800, 1.000000000000000000), + ( 1.000000000000000000, 0.9738133105073121200, 1.000000000000000000), + ( 1.000000000000000000, 0.9739251391814378600, 1.000000000000000000), + ( 1.000000000000000000, 0.9739853054123220900, 1.000000000000000000), + ( 1.000000000000000000, 0.9740766100205189300, 1.000000000000000000), + ( 1.000000000000000000, 0.9740186407800769400, 1.000000000000000000), + ( 1.000000000000000000, 0.9734748277352627300, 1.000000000000000000), + ( 1.000000000000000000, 0.9726370478153910600, 1.000000000000000000), + ( 1.000000000000000000, 0.9713998002717574300, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#8408 = EDGE_CURVE ( 'NONE', #9730, #10459, #9895, .T. ) ; +#8409 = ADVANCED_FACE ( 'NONE', ( #4452 ), #12548, .T. ) ; +#8410 = ORIENTED_EDGE ( 'NONE', *, *, #8222, .F. ) ; +#8411 = CARTESIAN_POINT ( 'NONE', ( 38.00917947414888000, -29.18949263023858300, 23.72327428314281800 ) ) ; +#8412 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #93, #12298, #4220, #11361, #5242, #12341, #6283, #234, #7339, #1237, #8361, #2239, #9378, #3252, #10388, #4264, #11410 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 1, 2, 2, 2, 2, 2, 4 ), + ( -6.000000000314835000E-008, 0.0004466457995899092200, 0.0008933515991798216600, 0.001786763198359656600, 0.003573586396719337200, 0.007147232793438709600, 0.008934055991798394900, 0.01072087919015808100, 0.01429452558687745000 ), + .UNSPECIFIED. ) ; +#8413 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#8414 = EDGE_LOOP ( 'NONE', ( #7763, #9020, #9200, #9811 ) ) ; +#8415 = CARTESIAN_POINT ( 'NONE', ( 35.61239862156126900, -30.38446400199620000, 26.10904888323716100 ) ) ; +#8416 = CARTESIAN_POINT ( 'NONE', ( 19.94205019309342600, -33.35025653084942100, 26.50741664928542100 ) ) ; +#8417 = ORIENTED_EDGE ( 'NONE', *, *, #10536, .T. ) ; +#8418 = ORIENTED_EDGE ( 'NONE', *, *, #3722, .T. ) ; +#8419 = CARTESIAN_POINT ( 'NONE', ( 34.04708285765514100, -95.07596123493895800, 16.00033144814231900 ) ) ; +#8420 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -94.39237608318526900, 1.716882203698027100 ) ) ; +#8421 = DIRECTION ( 'NONE', ( -0.9997148816737817500, -0.02351516685511995100, -0.004146358372418880600 ) ) ; +#8422 = CARTESIAN_POINT ( 'NONE', ( 32.58018779747276000, -32.73480565852711500, 26.98692659285462300 ) ) ; +#8423 = CARTESIAN_POINT ( 'NONE', ( 7.282570454307135700, -30.97677314911175400, 23.78196108752548100 ) ) ; +#8424 = CARTESIAN_POINT ( 'NONE', ( 6.144976528667890600, -32.95551158046195200, 11.57644568113621900 ) ) ; +#8425 = EDGE_LOOP ( 'NONE', ( #6636, #6659, #6957, #7121 ) ) ; +#8426 = CARTESIAN_POINT ( 'NONE', ( 31.44022199907774300, -30.84519804388410700, 27.87331807193175600 ) ) ; +#8427 = CARTESIAN_POINT ( 'NONE', ( 18.63915471908042000, -31.26646881304567700, 28.75014776386501200 ) ) ; +#8428 = AXIS2_PLACEMENT_3D ( 'NONE', #12991, #19, #12890 ) ; +#8429 = CARTESIAN_POINT ( 'NONE', ( 35.15352705886070300, -12.35979352601656500, 24.02575279725904900 ) ) ; +#8430 = CARTESIAN_POINT ( 'NONE', ( 39.36358471418229500, -29.07591583727270600, 21.85252201142769800 ) ) ; +#8431 = ORIENTED_EDGE ( 'NONE', *, *, #11693, .T. ) ; +#8432 = CARTESIAN_POINT ( 'NONE', ( 2.791831769735168200, -9.589147637865338000, 18.80277835311508000 ) ) ; +#8433 = CARTESIAN_POINT ( 'NONE', ( 5.326624897689488800, -17.97093321759356100, -18.44912170859105800 ) ) ; +#8434 = ORIENTED_EDGE ( 'NONE', *, *, #11095, .F. ) ; +#8435 = CARTESIAN_POINT ( 'NONE', ( 19.95431510909718000, -28.77949532668908700, 29.18866828981625600 ) ) ; +#8436 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000031100, -27.36471617542558800, 6.614837272327575200 ) ) ; +#8437 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.500000000000000000, -22.99999999999999600 ) ) ; +#8438 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, -5.000000000000042600, -19.35342349036130500 ) ) ; +#8439 = CARTESIAN_POINT ( 'NONE', ( 5.745812713533748500, -30.46150471944926600, 21.93631210916904800 ) ) ; +#8440 = CARTESIAN_POINT ( 'NONE', ( 5.476407205390903400, -24.45287427874990300, 11.11235418672659000 ) ) ; +#8441 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -30.22903959670250600, 26.39450799556718500 ) ) ; +#8442 = CARTESIAN_POINT ( 'NONE', ( 36.71987753168318100, -30.33777219590253400, 25.38526636996316200 ) ) ; +#8443 = ORIENTED_EDGE ( 'NONE', *, *, #12396, .T. ) ; +#8444 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999998200, -99.99999999999998600, -6.100827442047402000 ) ) ; +#8445 = CARTESIAN_POINT ( 'NONE', ( 35.62886328226633000, -19.38735425683115200, 18.86097764353726800 ) ) ; +#8446 = ORIENTED_EDGE ( 'NONE', *, *, #6054, .F. ) ; +#8447 = AXIS2_PLACEMENT_3D ( 'NONE', #10905, #3768, #9897 ) ; +#8448 = CARTESIAN_POINT ( 'NONE', ( 33.56094939552306000, -30.91893171118076500, 27.05059105003375600 ) ) ; +#8449 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999998600, -96.37139523553905500, 5.695249483684527500 ) ) ; +#8450 = CARTESIAN_POINT ( 'NONE', ( 9.944946612170600300, -29.89079566293708700, 26.32671045132542500 ) ) ; +#8451 = CARTESIAN_POINT ( 'NONE', ( 12.33611349493547700, -30.91204194195994100, 27.43441620599739700 ) ) ; +#8452 = CARTESIAN_POINT ( 'NONE', ( 8.831816687605659400, -30.47323394352830000, 25.73805922154310000 ) ) ; +#8453 = CARTESIAN_POINT ( 'NONE', ( 0.5269006706209896600, -11.04824124020467100, -11.93790972417754400 ) ) ; +#8454 = CARTESIAN_POINT ( 'NONE', ( 35.55233882692108700, -11.73841412440638600, 24.22473084989640000 ) ) ; +#8455 = CIRCLE ( 'NONE', #11080, 2.499999999999998700 ) ; +#8456 = CARTESIAN_POINT ( 'NONE', ( 38.46148470151146600, -30.29288463365784500, 23.82559041168143200 ) ) ; +#8457 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #10788, #4716, #11839 ), + ( #5754, #12800, #6794 ), + ( #714, #7835, #1720 ), + ( #8853, #2726, #9860 ), + ( #3732, #10867, #4762 ), + ( #11881, #5795, #12840 ), + ( #6844, #759, #7878 ), + ( #1762, #8900, #2767 ), + ( #9902, #3775, #10913 ), + ( #4803, #11923, #5840 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.003207035769912640200, 0.004008794712390800400, 0.004810553654868959800, 0.006414071539825280300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9832216388489923900, 1.000000000000000000), + ( 1.000000000000000000, 0.9877196813279903700, 1.000000000000000000), + ( 1.000000000000000000, 0.9918798835807274300, 1.000000000000000000), + ( 1.000000000000000000, 0.9957468610426959400, 1.000000000000000000), + ( 1.000000000000000000, 0.9964543526730459400, 1.000000000000000000), + ( 1.000000000000000000, 0.9976906671612172400, 1.000000000000000000), + ( 1.000000000000000000, 0.9982215299828928200, 1.000000000000000000), + ( 1.000000000000000000, 0.9995219653199258800, 1.000000000000000000), + ( 1.000000000000000000, 0.9999998027448816500, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#8458 = CARTESIAN_POINT ( 'NONE', ( 4.991357952927960400, -90.02697877893295700, -3.483023999303038700 ) ) ; +#8459 = VERTEX_POINT ( 'NONE', #6606 ) ; +#8460 = VECTOR ( 'NONE', #10558, 1000.000000000000000 ) ; +#8461 = CARTESIAN_POINT ( 'NONE', ( 35.50614772124764300, -31.11807439831368400, 25.81423817360725100 ) ) ; +#8462 = CARTESIAN_POINT ( 'NONE', ( 6.989810905923327800, -31.02752755283197300, 22.22550417873809200 ) ) ; +#8463 = AXIS2_PLACEMENT_3D ( 'NONE', #223, #213, #144 ) ; +#8464 = CARTESIAN_POINT ( 'NONE', ( 38.64878914205522900, -94.71799171675968400, 14.39213543017581800 ) ) ; +#8465 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -95.45536034008137000, 3.667068596446612100 ) ) ; +#8466 = CARTESIAN_POINT ( 'NONE', ( 2.102163603487689600, 11.98845711938676800, -22.89783639651189900 ) ) ; +#8467 = CARTESIAN_POINT ( 'NONE', ( 32.04486220709839000, -31.59160329850934400, 19.44972132372524600 ) ) ; +#8468 = ADVANCED_FACE ( 'NONE', ( #1773 ), #8369, .T. ) ; +#8469 = CARTESIAN_POINT ( 'NONE', ( 6.893083880664693000, -30.00407579449439800, 24.29560400985297300 ) ) ; +#8470 = CARTESIAN_POINT ( 'NONE', ( 40.00499227104624800, -19.98963667602123500, -11.53570912916732600 ) ) ; +#8471 = CARTESIAN_POINT ( 'NONE', ( 31.33675868070573500, -30.81858469197782900, 27.90930792818355500 ) ) ; +#8472 = CARTESIAN_POINT ( 'NONE', ( 13.18722931371815900, -32.64776786518798700, 27.45153395764338500 ) ) ; +#8473 = ORIENTED_EDGE ( 'NONE', *, *, #10574, .T. ) ; +#8475 = AXIS2_PLACEMENT_3D ( 'NONE', #5048, #12145, #6078 ) ; +#8474 = CYLINDRICAL_SURFACE ( 'NONE', #5697, 5.000000000000000000 ) ; +#8476 = CARTESIAN_POINT ( 'NONE', ( 39.67079523133486400, -30.20770447324842700, 21.65312601040306400 ) ) ; +#8477 = ORIENTED_EDGE ( 'NONE', *, *, #10890, .F. ) ; +#8478 = CARTESIAN_POINT ( 'NONE', ( 1.921203617335660100, -8.942019572329121100, 19.77176051979601500 ) ) ; +#8479 = CARTESIAN_POINT ( 'NONE', ( 6.342825867932203800, -23.02193869469573100, -18.37035621644224300 ) ) ; +#8480 = ADVANCED_FACE ( 'NONE', ( #12244 ), #5960, .F. ) ; +#8481 = CARTESIAN_POINT ( 'NONE', ( 17.88924642556814600, -94.74613513877763200, 18.64381943391766300 ) ) ; +#8482 = CARTESIAN_POINT ( 'NONE', ( 7.813280731601873100, -100.0000000000000100, -28.50008026614134200 ) ) ; +#8483 = CARTESIAN_POINT ( 'NONE', ( 37.02524706999627600, -94.72219806545337000, 15.44556310733654100 ) ) ; +#8484 = CARTESIAN_POINT ( 'NONE', ( 0.3909275614729210100, -6.955563781073941200, 17.48568114636960800 ) ) ; +#8485 = CARTESIAN_POINT ( 'NONE', ( 10.90651210994814200, -12.53140421290908400, 24.55364513818507900 ) ) ; +#8486 = CARTESIAN_POINT ( 'NONE', ( 5.443343911042984700, -29.30335999013508500, 22.13130297459176200 ) ) ; +#8487 = CARTESIAN_POINT ( 'NONE', ( 5.133444372958191300, -29.01046481468666000, 15.85157161390169200 ) ) ; +#8488 = CARTESIAN_POINT ( 'NONE', ( 36.49345665967992100, -31.15281868564959200, 24.95402774445886300 ) ) ; +#8489 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.57695970945501100, 13.47610556416909900 ) ) ; +#8490 = CARTESIAN_POINT ( 'NONE', ( 37.52795530163941600, -19.52250868323981300, 16.46613667361453200 ) ) ; +#8491 = EDGE_CURVE ( 'NONE', #8256, #8077, #4139, .T. ) ; +#8492 = CARTESIAN_POINT ( 'NONE', ( 33.45716677355693500, -30.38477232417496100, 27.17800757717548500 ) ) ; +#8493 = DIRECTION ( 'NONE', ( 0.5968658131681640100, -0.5102168038985729300, -0.6192172591995732700 ) ) ; +#8494 = CARTESIAN_POINT ( 'NONE', ( 2.740745821309541300, -10.57724190453625600, 17.65415203886476200 ) ) ; +#8495 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -95.07596123493894400, 15.95758058754439400 ) ) ; +#8496 = CARTESIAN_POINT ( 'NONE', ( 12.33346814347152400, -30.67443281086519100, 27.48454037598289200 ) ) ; +#8497 = CARTESIAN_POINT ( 'NONE', ( 8.996906832519169200, -29.63140642867357900, 25.64917679401653300 ) ) ; +#8498 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, -17.49999999999999600 ) ) ; +#8499 = CARTESIAN_POINT ( 'NONE', ( 23.33484214237845900, -19.84089650273096000, 23.26478443220902600 ) ) ; +#8500 = VERTEX_POINT ( 'NONE', #1790 ) ; +#8501 = CARTESIAN_POINT ( 'NONE', ( 37.82070510635576700, -29.16088568426208700, 23.86457551736637900 ) ) ; +#8502 = LINE ( 'NONE', #3045, #8167 ) ; +#8503 = CARTESIAN_POINT ( 'NONE', ( 35.47978732400805100, -30.11709359978290500, 26.15248361439581300 ) ) ; +#8504 = CARTESIAN_POINT ( 'NONE', ( 28.86732873816599800, -95.07596123493895800, 16.58677689659842600 ) ) ; +#8505 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#8506 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999998200, -95.78490438435380800, 4.330279032275233100 ) ) ; +#8507 = CARTESIAN_POINT ( 'NONE', ( 1.845630180359836300, 11.93493164662839400, -22.63087396392795000 ) ) ; +#8508 = CARTESIAN_POINT ( 'NONE', ( 35.28045417632358000, -37.14213175123195800, 16.08620130053741800 ) ) ; +#8509 = CARTESIAN_POINT ( 'NONE', ( 7.350211102300877800, -31.03045647101863800, 23.74901345218228600 ) ) ; +#8510 = CARTESIAN_POINT ( 'NONE', ( 41.04091417127139600, -17.89776909202759800, -11.04626414420747200 ) ) ; +#8511 = CARTESIAN_POINT ( 'NONE', ( 31.33705365418863700, -30.83354509389470300, 27.90658408854777800 ) ) ; +#8512 = CARTESIAN_POINT ( 'NONE', ( 8.530236220136144400, -31.62501897086312400, 23.28317980270632100 ) ) ; +#8513 = VECTOR ( 'NONE', #6005, 1000.000000000000000 ) ; +#8514 = CARTESIAN_POINT ( 'NONE', ( 38.92723385145644200, -28.91037362485796800, 21.99985075944900400 ) ) ; +#8515 = CARTESIAN_POINT ( 'NONE', ( 9.561026158799220900, -29.78325112559219400, 26.07521810929216600 ) ) ; +#8516 = CARTESIAN_POINT ( 'NONE', ( 6.510256157485012600, -20.37015317202164200, -18.27658745731875100 ) ) ; +#8517 = CARTESIAN_POINT ( 'NONE', ( 20.14039441766890400, -33.35446909076586100, 26.50697697917620500 ) ) ; +#8518 = CARTESIAN_POINT ( 'NONE', ( 11.52917813203060900, -93.15134209940860900, 21.49807363652975000 ) ) ; +#8519 = AXIS2_PLACEMENT_3D ( 'NONE', #303, #281, #237 ) ; +#8520 = CARTESIAN_POINT ( 'NONE', ( 26.38685548566231300, -21.05303270215305700, -26.94894788404251100 ) ) ; +#8521 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -99.99999999999998600, -25.63802908547507900 ) ) ; +#8522 = CARTESIAN_POINT ( 'NONE', ( 11.93827612559786100, -13.82053814923647500, 24.32633604346364500 ) ) ; +#8523 = CARTESIAN_POINT ( 'NONE', ( 6.188363853070961300, -30.67202803703842700, 22.01721072950605400 ) ) ; +#8524 = FACE_OUTER_BOUND ( 'NONE', #7181, .T. ) ; +#8525 = CARTESIAN_POINT ( 'NONE', ( 5.035448835755636000, -27.92768556837897300, 12.44574372808003600 ) ) ; +#8526 = CARTESIAN_POINT ( 'NONE', ( 42.49563003279458700, -10.44154865655177600, -20.92187104639648600 ) ) ; +#8527 = CARTESIAN_POINT ( 'NONE', ( 36.41675149579577900, -30.12961907362870000, 25.57745406583033100 ) ) ; +#8528 = CARTESIAN_POINT ( 'NONE', ( 38.93111111730672700, -19.67809513259981800, 13.70931876541591500 ) ) ; +#8529 = ADVANCED_FACE ( 'NONE', ( #9592 ), #12495, .T. ) ; +#8530 = CARTESIAN_POINT ( 'NONE', ( 33.47010656472844700, -30.76049515082459600, 27.14144077280819900 ) ) ; +#8531 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8532 = CARTESIAN_POINT ( 'NONE', ( 9.154176803788090000, -29.67169409824079600, 25.76818057269789000 ) ) ; +#8533 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -96.23082734627033100, 5.350767952306227000 ) ) ; +#8534 = CARTESIAN_POINT ( 'NONE', ( 12.74082995032832600, -30.92217532330488800, 27.58368734151185800 ) ) ; +#8535 = CARTESIAN_POINT ( 'NONE', ( 8.942134497663305500, -30.69755285954093400, 25.73152174557281000 ) ) ; +#8536 = LINE ( 'NONE', #2413, #8208 ) ; +#8537 = EDGE_CURVE ( 'NONE', #9000, #8893, #9272, .T. ) ; +#8538 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 3.469446951953615200E-016, -1.000000000000000000 ) ) ; +#8539 = CARTESIAN_POINT ( 'NONE', ( 29.68477285433223000, -28.88618851952552500, 28.67212719728206600 ) ) ; +#8540 = ADVANCED_FACE ( 'NONE', ( #7209 ), #3594, .T. ) ; +#8541 = CARTESIAN_POINT ( 'NONE', ( 38.30507021551842700, -30.05410924750080400, 24.09355669614479100 ) ) ; +#8542 = ORIENTED_EDGE ( 'NONE', *, *, #6977, .F. ) ; +#8543 = CARTESIAN_POINT ( 'NONE', ( 35.47978620331358700, -30.88256682216452000, 26.01752435271529500 ) ) ; +#8544 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 8.200000000000013500, 17.50000000000000400 ) ) ; +#8545 = LINE ( 'NONE', #12551, #5791 ) ; +#8546 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#8547 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999998200, -96.37138356716127400, 5.695220015246744300 ) ) ; +#8548 = CARTESIAN_POINT ( 'NONE', ( 25.05762127725337900, -27.96664356551895400, 27.45669629599069600 ) ) ; +#8549 = CARTESIAN_POINT ( 'NONE', ( 39.61764230977179600, -29.76299867617888100, 18.89891774503291100 ) ) ; +#8550 = CARTESIAN_POINT ( 'NONE', ( 6.897497110542701600, -30.27398253253749900, 24.28266361041146800 ) ) ; +#8551 = CARTESIAN_POINT ( 'NONE', ( 39.72222412552414300, -22.74521344830674600, -9.043788857634551100 ) ) ; +#8552 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983000, 27.93782961424066300 ) ) ; +#8553 = CARTESIAN_POINT ( 'NONE', ( 39.94745577479034200, -29.87040936573937300, 21.82274442149270800 ) ) ; +#8554 = ORIENTED_EDGE ( 'NONE', *, *, #11512, .T. ) ; +#8555 = CARTESIAN_POINT ( 'NONE', ( 9.139419781961267500, -29.66765099110218200, 25.75699851005806500 ) ) ; +#8556 = CARTESIAN_POINT ( 'NONE', ( 5.453227608241452800, -17.97359856141735800, -18.73316939704750100 ) ) ; +#8557 = ORIENTED_EDGE ( 'NONE', *, *, #2901, .F. ) ; +#8558 = CARTESIAN_POINT ( 'NONE', ( 8.919350166351131600, -97.45664212686861600, 19.73018982075241800 ) ) ; +#8559 = CARTESIAN_POINT ( 'NONE', ( 39.99992423885520800, -27.15477723550160900, 7.065198858287485200 ) ) ; +#8560 = EDGE_CURVE ( 'NONE', #6161, #7930, #6715, .T. ) ; +#8561 = CARTESIAN_POINT ( 'NONE', ( 10.50592105382547800, -16.63655602679402500, -24.80432773142155900 ) ) ; +#8562 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -96.63408478985343200, 6.393891568436776800 ) ) ; +#8563 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000000, -17.49999999999999600 ) ) ; +#8564 = CARTESIAN_POINT ( 'NONE', ( 15.06449898164616900, -17.00596337302211900, 23.76465963148096300 ) ) ; +#8565 = CARTESIAN_POINT ( 'NONE', ( 5.205126345465133800, -29.68692403850836900, 22.17423916994900100 ) ) ; +#8566 = CARTESIAN_POINT ( 'NONE', ( 6.904710869769108000, -30.68603640414708200, 13.69970711763723500 ) ) ; +#8567 = CARTESIAN_POINT ( 'NONE', ( 1.788613164347034900, 11.93868149410292800, -23.21138683565317300 ) ) ; +#8568 = ORIENTED_EDGE ( 'NONE', *, *, #2043, .F. ) ; +#8569 = ORIENTED_EDGE ( 'NONE', *, *, #11315, .T. ) ; +#8570 = CARTESIAN_POINT ( 'NONE', ( 39.76388238644202700, -19.84652088843597500, 10.72492821519744100 ) ) ; +#8571 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #10567, #12732, #10330 ), + ( #10308, #10531, #10374 ), + ( #10249, #10130, #9873 ), + ( #9729, #9663, #9581 ), + ( #9259, #9566, #12594 ), + ( #9541, #9782, #9283 ), + ( #9523, #9021, #8658 ), + ( #8478, #8247, #8494 ), + ( #9243, #8432, #8196 ), + ( #8228, #3690, #7807 ), + ( #7982, #7757, #7714 ), + ( #7697, #5663, #7589 ), + ( #5983, #7552, #7328 ), + ( #7261, #7242, #7201 ), + ( #7153, #7106, #6941 ), + ( #6786, #6703, #6317 ), + ( #6656, #6609, #6632 ), + ( #6541, #6250, #6163 ), + ( #13011, #6193, #5764 ), + ( #5305, #5506, #5748 ), + ( #5549, #5356, #5214 ), + ( #5167, #5256, #5085 ), + ( #5042, #4434, #4991 ), + ( #4816, #4863, #1645 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -7.155734338404329300E-018, 0.001016732693906397000, 0.002033465387812801300, 0.003050198081719205700, 0.004066930775625609600, 0.006100396163438418300, 0.007117128857344822200, 0.008133861551251226100, 0.01220079232687684400, 0.01321752502078324700, 0.01423425771468965100, 0.01626772310250245900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9832216388490150300, 1.000000000000000000), + ( 1.000000000000000000, 0.9819446635485531400, 1.000000000000000000), + ( 1.000000000000000000, 0.9802557317610536300, 1.000000000000000000), + ( 1.000000000000000000, 0.9762640100928261500, 1.000000000000000000), + ( 1.000000000000000000, 0.9739605502968014000, 1.000000000000000000), + ( 1.000000000000000000, 0.9688504898146723700, 1.000000000000000000), + ( 1.000000000000000000, 0.9660498235766519200, 1.000000000000000000), + ( 1.000000000000000000, 0.9601392851974859300, 1.000000000000000000), + ( 1.000000000000000000, 0.9570140055475822000, 1.000000000000000000), + ( 1.000000000000000000, 0.9471967819798949900, 1.000000000000000000), + ( 1.000000000000000000, 0.9400651080617370400, 1.000000000000000000), + ( 1.000000000000000000, 0.9286637506625103900, 1.000000000000000000), + ( 1.000000000000000000, 0.9247432650360488700, 1.000000000000000000), + ( 1.000000000000000000, 0.9167893306596993600, 1.000000000000000000), + ( 1.000000000000000000, 0.9127443459543950200, 1.000000000000000000), + ( 1.000000000000000000, 0.8922552563386616500, 1.000000000000000000), + ( 1.000000000000000000, 0.8750153015081891800, 1.000000000000000000), + ( 1.000000000000000000, 0.8536256169953544400, 1.000000000000000000), + ( 1.000000000000000000, 0.8493488310608732200, 1.000000000000000000), + ( 1.000000000000000000, 0.8409600549767477500, 1.000000000000000000), + ( 1.000000000000000000, 0.8368331120445733400, 1.000000000000000000), + ( 1.000000000000000000, 0.8246810503906513200, 1.000000000000000000), + ( 1.000000000000000000, 0.8168869556864508700, 1.000000000000000000), + ( 1.000000000000000000, 0.8094323569540451400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#8572 = CARTESIAN_POINT ( 'NONE', ( 33.25621403858289000, -30.37529947352361900, 27.26097580065554000 ) ) ; +#8573 = ORIENTED_EDGE ( 'NONE', *, *, #4115, .F. ) ; +#8574 = DIRECTION ( 'NONE', ( -0.5022820777495872200, 0.0000000000000000000, 0.8647038304365012300 ) ) ; +#8575 = CARTESIAN_POINT ( 'NONE', ( 9.112525223229667400, -29.66028955700407400, 25.73652218381047900 ) ) ; +#8576 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -96.75656818764737500, 6.749276979381348500 ) ) ; +#8577 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8578 = CARTESIAN_POINT ( 'NONE', ( 12.73986504836050000, -30.76397929207382000, 27.61946965762636500 ) ) ; +#8579 = ORIENTED_EDGE ( 'NONE', *, *, #3641, .F. ) ; +#8580 = AXIS2_PLACEMENT_3D ( 'NONE', #1535, #1492, #1480 ) ; +#8581 = CARTESIAN_POINT ( 'NONE', ( 9.022615919592230000, -29.83712151255832600, 25.76579749762360200 ) ) ; +#8582 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#8583 = CARTESIAN_POINT ( 'NONE', ( 33.66707742492337000, -28.26502170359940900, 25.48811332784975600 ) ) ; +#8584 = CARTESIAN_POINT ( 'NONE', ( 35.34802210785532100, -10.52872919260698300, 24.90677077785519000 ) ) ; +#8585 = ORIENTED_EDGE ( 'NONE', *, *, #11492, .F. ) ; +#8586 = CARTESIAN_POINT ( 'NONE', ( 37.84069856144807200, -30.98061530492745400, 23.55973510799952200 ) ) ; +#8587 = CARTESIAN_POINT ( 'NONE', ( 35.15097608546491200, -29.91917753816421300, 26.27740835135476200 ) ) ; +#8588 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -5.000000000000000900, 16.06938735382976400 ) ) ; +#8589 = EDGE_LOOP ( 'NONE', ( #8614, #10643, #10960, #12936, #1366 ) ) ; +#8590 = VERTEX_POINT ( 'NONE', #835 ) ; +#8591 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 7.000000000000000000, -17.49999999999999600 ) ) ; +#8592 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -97.57596123493897300, 10.74918630130059900 ) ) ; +#8593 = CARTESIAN_POINT ( 'NONE', ( 1.678284150175058500, 11.91542889174562300, -23.32171584982522500 ) ) ; +#8594 = CARTESIAN_POINT ( 'NONE', ( 38.34942161761869500, -30.51463762188670300, 13.24633071365578700 ) ) ; +#8595 = ADVANCED_FACE ( 'NONE', ( #3969 ), #1268, .T. ) ; +#8596 = ORIENTED_EDGE ( 'NONE', *, *, #277, .F. ) ; +#8597 = CARTESIAN_POINT ( 'NONE', ( 7.331413600608634300, -29.22676054331994100, 24.08370495360199500 ) ) ; +#8598 = CARTESIAN_POINT ( 'NONE', ( 20.14039537637301400, -27.96255689439421800, 27.45771657700752400 ) ) ; +#8599 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983000, 27.93782961424065500 ) ) ; +#8600 = CARTESIAN_POINT ( 'NONE', ( 25.05794980690656700, -33.35025653084936400, 26.50741664928542800 ) ) ; +#8601 = AXIS2_PLACEMENT_3D ( 'NONE', #1863, #2008, #1750 ) ; +#8602 = CARTESIAN_POINT ( 'NONE', ( 38.89596250059158000, -30.60849042378891500, 21.70076572598904700 ) ) ; +#8603 = CARTESIAN_POINT ( 'NONE', ( 9.072374359338651200, -29.64930955526436700, 25.70581823842621800 ) ) ; +#8604 = CARTESIAN_POINT ( 'NONE', ( 6.954380133261927300, -23.15452472865489500, -19.69363619399774000 ) ) ; +#8605 = VERTEX_POINT ( 'NONE', #5018 ) ; +#8606 = ADVANCED_FACE ( 'NONE', ( #1314 ), #12060, .T. ) ; +#8607 = DATE_AND_TIME ( #11279, #792 ) ; +#8608 = CARTESIAN_POINT ( 'NONE', ( 7.974808194957475400, -94.72210163403904900, 15.44587895064649000 ) ) ; +#8609 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000900, 14.31000000000000900 ) ) ; +#8610 = CARTESIAN_POINT ( 'NONE', ( 37.08952777126196300, -12.49999999999999300, -13.47150686695082000 ) ) ; +#8611 = CARTESIAN_POINT ( 'NONE', ( 18.03811088883185900, -18.78392752374167400, 23.45115658097670800 ) ) ; +#8612 = CARTESIAN_POINT ( 'NONE', ( 6.218689902545027500, -28.93433909670195100, 22.32451224213654900 ) ) ; +#8613 = CARTESIAN_POINT ( 'NONE', ( 10.83870300792428200, -30.73112902042587500, 26.82487172881892300 ) ) ; +#8614 = ORIENTED_EDGE ( 'NONE', *, *, #5386, .F. ) ; +#8615 = CARTESIAN_POINT ( 'NONE', ( 16.35351310171654800, -95.07596123493895800, 9.573790652947955900 ) ) ; +#8616 = CARTESIAN_POINT ( 'NONE', ( 33.27169132862344000, -30.69024259787925500, 27.24156962408512000 ) ) ; +#8617 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999998200, -12.49999999999999800, 10.16072181388589600 ) ) ; +#8618 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 1, + ( #2682, #6791 ), + .UNSPECIFIED., .F., .F., + ( 2, 2 ), + ( 0.1055738331667924500, 0.7899626827099329700 ), + .UNSPECIFIED. ) ; +#8619 = CARTESIAN_POINT ( 'NONE', ( 8.980020412502121000, -29.62412372701800200, 25.63426288869024100 ) ) ; +#8620 = CIRCLE ( 'NONE', #10235, 5.000000000000000000 ) ; +#8621 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#8622 = ORIENTED_EDGE ( 'NONE', *, *, #12094, .F. ) ; +#8623 = CARTESIAN_POINT ( 'NONE', ( 12.74083338759561300, -30.61533258457485800, 27.63776911405030000 ) ) ; +#8624 = CARTESIAN_POINT ( 'NONE', ( 9.196722341311371500, -31.01558880801462300, 25.68882676303816500 ) ) ; +#8625 = CARTESIAN_POINT ( 'NONE', ( 34.57942387034943000, -19.76828823194269400, -24.12169304238526000 ) ) ; +#8626 = CARTESIAN_POINT ( 'NONE', ( 38.26659580699672600, -31.26311145616626800, 24.40428730933179900 ) ) ; +#8627 = CARTESIAN_POINT ( 'NONE', ( 0.5278640450004255000, -11.05572809000077700, 25.00000000000000000 ) ) ; +#8628 = CARTESIAN_POINT ( 'NONE', ( 38.12048384401281000, -29.73738962626092100, 24.16214216483330900 ) ) ; +#8629 = VECTOR ( 'NONE', #1694, 1000.000000000000000 ) ; +#8630 = CARTESIAN_POINT ( 'NONE', ( 35.23354626928691100, -30.64493461624428900, 26.28678115995121800 ) ) ; +#8631 = DIRECTION ( 'NONE', ( 0.8309840000596804300, -0.5562963164041382400, 0.0000000000000000000 ) ) ; +#8632 = AXIS2_PLACEMENT_3D ( 'NONE', #12186, #12058, #11958 ) ; +#8633 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, -17.49999999999999600 ) ) ; +#8634 = CARTESIAN_POINT ( 'NONE', ( 39.67599117603888500, -30.34620024003449900, 9.363122272370317100 ) ) ; +#8635 = CARTESIAN_POINT ( 'NONE', ( 7.151472817915810700, -30.59765079343853200, 24.30633963600679300 ) ) ; +#8636 = CARTESIAN_POINT ( 'NONE', ( 20.01853928026186900, -28.77816371652370700, 29.18890308861620000 ) ) ; +#8637 = CARTESIAN_POINT ( 'NONE', ( 35.18184475334762600, -19.88271937975048300, -23.59644547759233600 ) ) ; +#8638 = EDGE_CURVE ( 'NONE', #7418, #5688, #11783, .T. ) ; +#8639 = CARTESIAN_POINT ( 'NONE', ( 39.87479420005716700, -29.53473157469619900, 21.93600882989396100 ) ) ; +#8640 = CARTESIAN_POINT ( 'NONE', ( 8.903123599296453200, -29.60327694981702300, 25.57312474367900300 ) ) ; +#8641 = CARTESIAN_POINT ( 'NONE', ( 7.152855050622795500, -20.44335731654029700, -19.56563351206448700 ) ) ; +#8642 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #12401, #5312, #7406, #1301 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 5.608053774242554500, 6.283185307179586200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9623757713646634600, 0.9623757713646634600, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#8643 = EDGE_LOOP ( 'NONE', ( #9525, #9535, #9551, #9641, #9671, #9680 ) ) ; +#8644 = CARTESIAN_POINT ( 'NONE', ( 11.35131883692147200, -95.07596123493891600, 15.12240204612360700 ) ) ; +#8645 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000900, 16.29999999999999400 ) ) ; +#8646 = CARTESIAN_POINT ( 'NONE', ( 30.57914694710745400, -12.49999999999999500, -21.61016435598681400 ) ) ; +#8647 = CARTESIAN_POINT ( 'NONE', ( 25.05762127725337900, -27.96664356551895400, 27.45669629599069600 ) ) ; +#8648 = CARTESIAN_POINT ( 'NONE', ( 35.16116628810238600, -19.92219815049559300, -23.60375082238562800 ) ) ; +#8649 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -99.99999999999998600, -1.331861779110292500E-014 ) ) ; +#8650 = CARTESIAN_POINT ( 'NONE', ( 5.463007304497194700, -30.08813075765804300, 22.42443653543793400 ) ) ; +#8651 = CARTESIAN_POINT ( 'NONE', ( 10.86402131001025100, -30.22496182522353100, 26.86086813635550600 ) ) ; +#8652 = CARTESIAN_POINT ( 'NONE', ( 6.050532966968412500, -30.55079519729965300, 21.46087037243998800 ) ) ; +#8653 = ADVANCED_FACE ( 'NONE', ( #8798 ), #9735, .T. ) ; +#8654 = EDGE_CURVE ( 'NONE', #9730, #4, #7394, .T. ) ; +#8655 = CARTESIAN_POINT ( 'NONE', ( 42.49999999999999300, 12.00000000000000000, 0.0000000000000000000 ) ) ; +#8656 = CARTESIAN_POINT ( 'NONE', ( 33.25625694677746200, -31.01860152555628100, 27.14764697088976000 ) ) ; +#8657 = CARTESIAN_POINT ( 'NONE', ( 36.99415197117565400, -35.79501342429214400, 14.38048514747097100 ) ) ; +#8658 = CARTESIAN_POINT ( 'NONE', ( 2.370270345814536200, -10.23353446373076800, 17.33526771242373600 ) ) ; +#8659 = SPHERICAL_SURFACE ( 'NONE', #3531, 2.500000000000000000 ) ; +#8660 = CARTESIAN_POINT ( 'NONE', ( 26.50531620447876300, -27.99878938728884500, 27.44663080084459800 ) ) ; +#8661 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -19.87270537885227400, 23.25917566912282200 ) ) ; +#8662 = CARTESIAN_POINT ( 'NONE', ( 12.94477683372341700, -30.80689183513349100, 27.68265672337895100 ) ) ; +#8663 = CARTESIAN_POINT ( 'NONE', ( 9.123084977207810200, -30.22403699761543200, 25.93886631762316200 ) ) ; +#8664 = CARTESIAN_POINT ( 'NONE', ( 0.09708713634879574700, 10.18993461597465900, -17.86050372698883100 ) ) ; +#8665 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000000, -16.29999999999998300 ) ) ; +#8666 = CARTESIAN_POINT ( 'NONE', ( 2.501097020554925900, -9.240536455385910800, -23.55289141356945800 ) ) ; +#8667 = ADVANCED_FACE ( 'NONE', ( #682 ), #4973, .T. ) ; +#8668 = VERTEX_POINT ( 'NONE', #4385 ) ; +#8669 = CARTESIAN_POINT ( 'NONE', ( 37.99215950570525300, -30.75526433662840000, 23.87324987959089700 ) ) ; +#8670 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.626231091044179100, -13.34826104448560200 ) ) ; +#8671 = FACE_OUTER_BOUND ( 'NONE', #9718, .T. ) ; +#8672 = CARTESIAN_POINT ( 'NONE', ( 34.95933885011077500, -29.91697175440356200, 26.38007753445549500 ) ) ; +#8673 = CARTESIAN_POINT ( 'NONE', ( 34.05456624497583800, -14.60728918249213100, -25.02823230367265600 ) ) ; +#8674 = CARTESIAN_POINT ( 'NONE', ( 44.47213146979886700, -11.05573706040219900, 8.005331014629273800 ) ) ; +#8675 = CARTESIAN_POINT ( 'NONE', ( 1.392122038450993600, 11.74708242360312800, -22.72157559230984000 ) ) ; +#8676 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -5.000000000000000900, 0.0000000000000000000 ) ) ; +#8677 = CARTESIAN_POINT ( 'NONE', ( 7.269423577500894000, -29.56819754744890000, 24.37827866903201400 ) ) ; +#8678 = CARTESIAN_POINT ( 'NONE', ( 15.45093844490857800, -30.77347370972945500, 28.36765821957493800 ) ) ; +#8679 = CARTESIAN_POINT ( 'NONE', ( 36.01535942513007200, -18.71933115612922900, -23.29816433608415200 ) ) ; +#8680 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -94.37865612748647900, 14.93528788905052800 ) ) ; +#8681 = CARTESIAN_POINT ( 'NONE', ( 38.96333896051780200, -30.58779976204118300, 21.75936271226902700 ) ) ; +#8682 = CIRCLE ( 'NONE', #7080, 1.200000000000012600 ) ; +#8683 = CARTESIAN_POINT ( 'NONE', ( 8.752297622560687900, -29.56256044250921600, 25.45122627432125700 ) ) ; +#8684 = CARTESIAN_POINT ( 'NONE', ( 6.122327532765937400, -17.98662238721826900, -20.12756751783650700 ) ) ; +#8685 = DIRECTION ( 'NONE', ( -0.9998119252976104300, -0.01909902633348330900, -0.003367673647853504600 ) ) ; +#8686 = CARTESIAN_POINT ( 'NONE', ( 39.18448845248655500, -30.35849349780620800, 20.90279146677159300 ) ) ; +#8687 = AXIS2_PLACEMENT_3D ( 'NONE', #6590, #529, #7638 ) ; +#8688 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -5.000000000000000900, -23.00000000000000000 ) ) ; +#8689 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8690 = CARTESIAN_POINT ( 'NONE', ( 14.83540919082380700, -19.18482720776582800, 22.44972881424004600 ) ) ; +#8691 = VERTEX_POINT ( 'NONE', #8665 ) ; +#8692 = CARTESIAN_POINT ( 'NONE', ( 6.275744329555228000, -29.00506246217686300, 22.61394929166245400 ) ) ; +#8693 = EDGE_LOOP ( 'NONE', ( #3450, #3546, #3559, #3610 ) ) ; +#8694 = CARTESIAN_POINT ( 'NONE', ( 13.69575091714328100, -100.0000000000000100, -36.63958563575383900 ) ) ; +#8695 = CARTESIAN_POINT ( 'NONE', ( 10.95037081809290300, -30.93458933705256100, 26.80799099140367400 ) ) ; +#8696 = LINE ( 'NONE', #439, #5946 ) ; +#8697 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, -97.08344081517952900, 22.14483981135565900 ) ) ; +#8698 = CARTESIAN_POINT ( 'NONE', ( 33.16997593154084700, -30.61257585836376900, 27.29341871950715900 ) ) ; +#8699 = CARTESIAN_POINT ( 'NONE', ( 26.10789971138973100, -39.48871185607166700, 19.80034447343717500 ) ) ; +#8700 = CARTESIAN_POINT ( 'NONE', ( 8.655606147465533700, -29.53672758621323900, 25.37040334657425700 ) ) ; +#8701 = CARTESIAN_POINT ( 'NONE', ( 12.94437317362601000, -30.67977927278712300, 27.70177889498307900 ) ) ; +#8702 = ORIENTED_EDGE ( 'NONE', *, *, #11077, .T. ) ; +#8703 = CARTESIAN_POINT ( 'NONE', ( 9.335440410504382700, -31.16708075642347000, 25.65000347261025800 ) ) ; +#8704 = CARTESIAN_POINT ( 'NONE', ( 14.39554126482262200, -12.51007602746698500, -25.44259412727192800 ) ) ; +#8705 = CARTESIAN_POINT ( 'NONE', ( 16.49953127096480500, -20.01384545781165500, 22.81373943744575400 ) ) ; +#8706 = CARTESIAN_POINT ( 'NONE', ( 4.677018569700736700, -11.35542600021461000, -23.38242407809410000 ) ) ; +#8707 = CARTESIAN_POINT ( 'NONE', ( 11.23331147680192500, -11.83904368519425200, -25.08454610180427500 ) ) ; +#8708 = FACE_OUTER_BOUND ( 'NONE', #9271, .T. ) ; +#8709 = CARTESIAN_POINT ( 'NONE', ( 37.77782302361661900, -29.34629089744270700, 24.12295197608031200 ) ) ; +#8710 = CARTESIAN_POINT ( 'NONE', ( 4.876839577180215900E-013, -9.021923507518980800, -16.06092242460628200 ) ) ; +#8711 = CARTESIAN_POINT ( 'NONE', ( 35.04304289829472900, -30.50615119206814500, 26.42081400050446400 ) ) ; +#8712 = CARTESIAN_POINT ( 'NONE', ( 23.33333333333333600, -39.55229479934740100, 19.78913308502480500 ) ) ; +#8713 = ORIENTED_EDGE ( 'NONE', *, *, #12375, .F. ) ; +#8714 = ORIENTED_EDGE ( 'NONE', *, *, #277, .T. ) ; +#8715 = CARTESIAN_POINT ( 'NONE', ( 12.90136799010447000, -10.43079757070502300, -25.07596123493895100 ) ) ; +#8716 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999996400, -97.26512727357705000, 8.543711005895064000 ) ) ; +#8717 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -99.99999999999998600, -38.36942826376122900 ) ) ; +#8718 = CARTESIAN_POINT ( 'NONE', ( 7.513470545201521100, -30.95414168079186400, 24.17025158061004600 ) ) ; +#8719 = ORIENTED_EDGE ( 'NONE', *, *, #11768, .T. ) ; +#8720 = CARTESIAN_POINT ( 'NONE', ( 10.11458516278070400, -28.34770659563815400, 24.83266624212577900 ) ) ; +#8721 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -8.819647309268738400, -11.53187069007421600 ) ) ; +#8722 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -97.57594304062040200, 12.90932985333946600 ) ) ; +#8723 = CARTESIAN_POINT ( 'NONE', ( 39.35823833152176800, -29.17350110266207600, 22.16092132481738000 ) ) ; +#8724 = ORIENTED_EDGE ( 'NONE', *, *, #12982, .F. ) ; +#8725 = CARTESIAN_POINT ( 'NONE', ( 8.377807399946934900, -29.46295420050927300, 25.13086308638939300 ) ) ; +#8726 = CARTESIAN_POINT ( 'NONE', ( 7.550876037840963800, -23.25284095883542800, -20.67926847924574900 ) ) ; +#8727 = ORIENTED_EDGE ( 'NONE', *, *, #11336, .T. ) ; +#8728 = ADVANCED_FACE ( 'NONE', ( #5739 ), #2614, .F. ) ; +#8729 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8730 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884340200E-016, -8.384302502690074400, 10.61863298167315000 ) ) ; +#8731 = CARTESIAN_POINT ( 'NONE', ( 10.43730011261178300, -19.28198131944622800, -24.23226099583912000 ) ) ; +#8732 = ORIENTED_EDGE ( 'NONE', *, *, #4078, .F. ) ; +#8733 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8734 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669239200, -0.9848077530122092400 ) ) ; +#8735 = CARTESIAN_POINT ( 'NONE', ( 5.998549381268710500, -30.51966540749450000, 22.55863950482623900 ) ) ; +#8736 = CARTESIAN_POINT ( 'NONE', ( 6.330670735464735800, -33.35968313354238300, 11.93967752764613600 ) ) ; +#8737 = CARTESIAN_POINT ( 'NONE', ( 18.17651462047582500, -99.99999999999998600, 21.63057173623877100 ) ) ; +#8738 = CARTESIAN_POINT ( 'NONE', ( 10.94143571818822600, -30.45325444270132900, 26.91205369613753400 ) ) ; +#8739 = ORIENTED_EDGE ( 'NONE', *, *, #12125, .T. ) ; +#8740 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8741 = ORIENTED_EDGE ( 'NONE', *, *, #9702, .F. ) ; +#8742 = VERTEX_POINT ( 'NONE', #5642 ) ; +#8743 = CARTESIAN_POINT ( 'NONE', ( 24.85960462362703200, -27.96255689439421800, 27.45771657700753100 ) ) ; +#8744 = CARTESIAN_POINT ( 'NONE', ( 33.16308317704987700, -30.94155171788298700, 27.21900704229802800 ) ) ; +#8745 = CARTESIAN_POINT ( 'NONE', ( 10.03756979662469300, -12.50000000000001100, 17.02890513139587000 ) ) ; +#8746 = CARTESIAN_POINT ( 'NONE', ( 8.209042434402682900, -29.41873972096073000, 24.97515916891006100 ) ) ; +#8747 = CARTESIAN_POINT ( 'NONE', ( 6.050532363161184300, -28.87042587369011700, 21.75716330061473200 ) ) ; +#8748 = CARTESIAN_POINT ( 'NONE', ( 13.25199807535736700, -30.84828003571225400, 27.77577752242402200 ) ) ; +#8749 = AXIS2_PLACEMENT_3D ( 'NONE', #1963, #1922, #1878 ) ; +#8750 = CARTESIAN_POINT ( 'NONE', ( 9.196707361935978000, -30.45073559145080100, 25.98692435433593700 ) ) ; +#8751 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8752 = CARTESIAN_POINT ( 'NONE', ( 4.767506489881117900, -9.920634440803910400, -24.08169110637255600 ) ) ; +#8753 = ORIENTED_EDGE ( 'NONE', *, *, #796, .F. ) ; +#8754 = CARTESIAN_POINT ( 'NONE', ( 38.09577337682226500, -30.39339014601164400, 24.21763963494356300 ) ) ; +#8755 = ORIENTED_EDGE ( 'NONE', *, *, #11394, .T. ) ; +#8756 = CARTESIAN_POINT ( 'NONE', ( 0.9325418887709808800, -7.644176151153541100, -20.79684743135067700 ) ) ; +#8757 = CARTESIAN_POINT ( 'NONE', ( 34.96333346112669500, -31.13258265135874900, 26.17264039226423500 ) ) ; +#8758 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -27.09143239524033600, 6.754920151478382100 ) ) ; +#8759 = CARTESIAN_POINT ( 'NONE', ( 11.41118663671657000, -9.946730015271009900, -25.00000000000000000 ) ) ; +#8760 = CARTESIAN_POINT ( 'NONE', ( 2.249424652199371300, 11.66957896172722200, -23.75287673900330900 ) ) ; +#8761 = CARTESIAN_POINT ( 'NONE', ( 8.945345632987358200, -23.42713915142618900, -22.44355462259115800 ) ) ; +#8762 = CARTESIAN_POINT ( 'NONE', ( 7.230090524487721400, -30.02457863168821800, 24.60807196449915000 ) ) ; +#8763 = CARTESIAN_POINT ( 'NONE', ( 6.379945075949430100, -29.35197354611205300, 24.48337328031241000 ) ) ; +#8764 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000700, -5.995992694086480100, -18.25906351094937800 ) ) ; +#8765 = CARTESIAN_POINT ( 'NONE', ( 39.92009534516152800, -89.96976285135618000, -2.469206202558380500 ) ) ; +#8766 = AXIS2_PLACEMENT_3D ( 'NONE', #1240, #1225, #1215 ) ; +#8767 = LINE ( 'NONE', #11498, #5706 ) ; +#8768 = CARTESIAN_POINT ( 'NONE', ( 39.35829081181110200, -30.40366519306159200, 21.94166768343484400 ) ) ; +#8769 = EDGE_LOOP ( 'NONE', ( #1557, #2796, #2824, #3149 ) ) ; +#8770 = CARTESIAN_POINT ( 'NONE', ( 7.747408468435587300, -29.29962012882187800, 24.52590661800216800 ) ) ; +#8771 = CARTESIAN_POINT ( 'NONE', ( 7.768204249947136700, -20.49791097879110800, -20.51644484569819900 ) ) ; +#8772 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -22.09809361523258900, -11.60738841991323700 ) ) ; +#8773 = CARTESIAN_POINT ( 'NONE', ( -2.757976880125084200E-015, -97.08226426698121300, 19.60648073883276900 ) ) ; +#8774 = CARTESIAN_POINT ( 'NONE', ( 10.09389338306278100, -20.00311047549982700, -23.80956608947122500 ) ) ; +#8775 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3708, #7943, #3838 ), + ( #10982, #4868, #11978 ), + ( #5899, #12933, #6948 ), + ( #859, #7990, #1868 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.01592776396892535400, 0.01608118859727798400 ), + ( 0.0000000000000000000, 0.8353137093104952000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7598120622700277300, 0.9208886789337782400), + ( 1.000000000000000000, 0.7598250879397801000, 0.9208929692322487300), + ( 1.000000000000000000, 0.7598319625895927400, 0.9208952335534037500), + ( 1.000000000000000000, 0.7598327137260070300, 0.9208954809571434600) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#8776 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000000, -3.189999999999994200 ) ) ; +#8777 = FACE_OUTER_BOUND ( 'NONE', #9317, .T. ) ; +#8778 = CARTESIAN_POINT ( 'NONE', ( 5.998476290887772700, -29.27464617320150400, 22.77510891252759300 ) ) ; +#8779 = CARTESIAN_POINT ( 'NONE', ( 5.203534110889730600, -29.30123510853371400, 17.08808682835873300 ) ) ; +#8780 = VERTEX_POINT ( 'NONE', #1523 ) ; +#8781 = CARTESIAN_POINT ( 'NONE', ( 7.280000885119435800, -97.40634803306923600, 18.97250827317808200 ) ) ; +#8782 = CARTESIAN_POINT ( 'NONE', ( 11.15941080854967600, -31.06109917467967900, 26.85174960335115600 ) ) ; +#8784 = AXIS2_PLACEMENT_3D ( 'NONE', #2522, #2228, #2219 ) ; +#8783 = CARTESIAN_POINT ( 'NONE', ( 38.28114668717808700, -7.827058169204967400, -24.99999999999999600 ) ) ; +#8785 = CARTESIAN_POINT ( 'NONE', ( 32.86457718748369700, -30.53430814022619100, 27.41975923759652600 ) ) ; +#8786 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999300, -12.50000000000001800, 22.05918254822885800 ) ) ; +#8787 = CARTESIAN_POINT ( 'NONE', ( 7.498939431068927200, -29.23831203489092800, 24.25047470556690900 ) ) ; +#8788 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#8789 = CARTESIAN_POINT ( 'NONE', ( 13.25235724026958900, -30.76913089949278700, 27.79026021280490600 ) ) ; +#8790 = FACE_OUTER_BOUND ( 'NONE', #12546, .T. ) ; +#8791 = CARTESIAN_POINT ( 'NONE', ( 9.335798399095514500, -29.72290737012329800, 25.90411437597826000 ) ) ; +#8792 = CARTESIAN_POINT ( 'NONE', ( 11.09897866161144900, -18.29847908941554000, -24.80278050426332500 ) ) ; +#8793 = CARTESIAN_POINT ( 'NONE', ( 35.00036364757427500, -12.01297108703087700, 24.33653304226272600 ) ) ; +#8794 = CARTESIAN_POINT ( 'NONE', ( 4.905928604510181800, -8.755346252210392400, -24.85622173462810400 ) ) ; +#8795 = CARTESIAN_POINT ( 'NONE', ( 37.65059908549287800, -29.20360746035283100, 24.07223921416951700 ) ) ; +#8796 = CARTESIAN_POINT ( 'NONE', ( 24.81280616483239900, -30.65917406624146600, 28.85723021296911000 ) ) ; +#8797 = CARTESIAN_POINT ( 'NONE', ( 34.64270536307383700, -30.36412775553873500, 26.62966619657331400 ) ) ; +#8798 = FACE_OUTER_BOUND ( 'NONE', #2009, .T. ) ; +#8799 = CARTESIAN_POINT ( 'NONE', ( 10.93583544863790300, -11.14128102332252500, -24.99999999999965900 ) ) ; +#8800 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -23.91420473869548900, -27.45344971053349400 ) ) ; +#8801 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1634, #6484, #509, #427 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 6.135433674210147100E-005 ), + .UNSPECIFIED. ) ; +#8802 = EDGE_LOOP ( 'NONE', ( #9217, #9316 ) ) ; +#8803 = CARTESIAN_POINT ( 'NONE', ( 7.885942701943514000, -31.10577706837745300, 24.34963831327014500 ) ) ; +#8804 = CARTESIAN_POINT ( 'NONE', ( 37.09632490130395900, -94.84620998259715900, 15.03935203264004800 ) ) ; +#8805 = CARTESIAN_POINT ( 'NONE', ( 41.90275694107757700, -9.889633042984330700, -22.49554079788448700 ) ) ; +#8806 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8396, #9412, #5323, #12411, #6360, #312, #7415, #1310, #8449, #2308, #9452, #3330, #10464, #4333, #11485, #5376 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( -2.291010613981940200E-005, 0.004447751083405855800, 0.008918412272951530000, 0.01115374286772436600, 0.01227140816511079200, 0.01338907346249721900, 0.01562440405727007600, 0.01785973465204293200 ), + .UNSPECIFIED. ) ; +#8807 = CARTESIAN_POINT ( 'NONE', ( 40.96941404539460100, -95.07596123493894400, 7.948371964453384600 ) ) ; +#8808 = EDGE_CURVE ( 'NONE', #7050, #216, #3034, .T. ) ; +#8809 = CYLINDRICAL_SURFACE ( 'NONE', #2920, 2.499999999999998700 ) ; +#8810 = CARTESIAN_POINT ( 'NONE', ( 38.86354071465972000, -28.96860743477369500, 22.31640924825405000 ) ) ; +#8811 = AXIS2_PLACEMENT_3D ( 'NONE', #3049, #9214, #7216 ) ; +#8812 = CARTESIAN_POINT ( 'NONE', ( 7.297810648590807000, -29.18957613005045800, 24.00888846434325100 ) ) ; +#8813 = CARTESIAN_POINT ( 'NONE', ( 6.770024868477636700, -17.99610176032512100, -21.16130479222572100 ) ) ; +#8814 = DIRECTION ( 'NONE', ( -0.04443732050992271800, 0.9990121743732147700, -3.100431963449506900E-013 ) ) ; +#8815 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -99.99999999999998600, 21.63057173623876400 ) ) ; +#8816 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8817 = CARTESIAN_POINT ( 'NONE', ( 19.89693543307430400, -19.87568216611875000, 23.25829123793062100 ) ) ; +#8818 = CARTESIAN_POINT ( 'NONE', ( 6.608907495531973100, -30.83204644769402600, 22.87254783790750800 ) ) ; +#8819 = LINE ( 'NONE', #5019, #5443 ) ; +#8820 = CARTESIAN_POINT ( 'NONE', ( 7.450529183623209500, -30.96653092008340700, 14.56942902031005000 ) ) ; +#8821 = CARTESIAN_POINT ( 'NONE', ( 11.13269935344471400, -30.62298913470619900, 26.98793710841403000 ) ) ; +#8822 = AXIS2_PLACEMENT_3D ( 'NONE', #2092, #2071, #2056 ) ; +#8823 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, 3.189999999999994200 ) ) ; +#8824 = EDGE_CURVE ( 'NONE', #8090, #7930, #3355, .T. ) ; +#8825 = CARTESIAN_POINT ( 'NONE', ( 39.18992863369741300, -9.016637900694583200, -24.76524854475961800 ) ) ; +#8826 = CARTESIAN_POINT ( 'NONE', ( 32.86874390330308400, -30.81171235836987800, 27.38195923435871400 ) ) ; +#8827 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, -17.49999999999999600 ) ) ; +#8828 = CARTESIAN_POINT ( 'NONE', ( 7.294438231893930300, -29.18875912617916100, 24.00483409035702900 ) ) ; +#8829 = CARTESIAN_POINT ( 'NONE', ( 13.35400660599367800, -30.86277230741274400, 27.80557772501943200 ) ) ; +#8830 = CARTESIAN_POINT ( 'NONE', ( 9.389798217707747700, -30.64405358519610400, 26.05946176709510800 ) ) ; +#8831 = CARTESIAN_POINT ( 'NONE', ( 28.04572538078515000, -30.73239406695558500, 28.64853081869167200 ) ) ; +#8832 = DIRECTION ( 'NONE', ( -0.02364944212992631900, -0.9997203128310154800, 0.0000000000000000000 ) ) ; +#8833 = CARTESIAN_POINT ( 'NONE', ( 6.718856123089556900, -7.827207368041549700, -25.00000000000000000 ) ) ; +#8834 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -5.000000000000000900, 0.0000000000000000000 ) ) ; +#8835 = CARTESIAN_POINT ( 'NONE', ( 38.10674598456670000, -30.14050137663895900, 24.31040769535978200 ) ) ; +#8836 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8837 = CARTESIAN_POINT ( 'NONE', ( 34.62708431706408200, -30.94223414645212600, 26.49816829858001900 ) ) ; +#8838 = CARTESIAN_POINT ( 'NONE', ( 33.28811424057387600, -30.36675257410700000, 27.24784117461459900 ) ) ; +#8839 = VECTOR ( 'NONE', #3669, 1000.000000000000000 ) ; +#8840 = CARTESIAN_POINT ( 'NONE', ( 38.32971059030557400, -19.59738641957787000, 15.13930279967785000 ) ) ; +#8841 = CARTESIAN_POINT ( 'NONE', ( 7.535840072607002500, -30.32630312999015100, 24.85627647593910100 ) ) ; +#8842 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -7.395277334996141100, 10.22788370481686300 ) ) ; +#8843 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11292, #8296, #9301, #3181, #10312, #4190, #11334, #5216, #12313, #6252, #203, #7311, #1205, #8336, #2207 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 1, 2, 2, 2, 2, 4 ), + ( -5.999999999699367600E-008, 0.0003396424460303405600, 0.0006793448920606780600, 0.001358749784121358100, 0.002717559568242713300, 0.004076369352364068300, 0.004755774244424743400, 0.005435179136485418500 ), + .UNSPECIFIED. ) ; +#8844 = CARTESIAN_POINT ( 'NONE', ( 32.10703553629231500, -95.07596123494816700, 8.224698702687730300 ) ) ; +#8845 = CARTESIAN_POINT ( 'NONE', ( 39.74383023105620100, -30.03468998623446500, 22.11271041557241900 ) ) ; +#8846 = ORIENTED_EDGE ( 'NONE', *, *, #2967, .F. ) ; +#8847 = CARTESIAN_POINT ( 'NONE', ( 7.289520130971284900, -29.18756810123164800, 23.99891238243797500 ) ) ; +#8848 = CARTESIAN_POINT ( 'NONE', ( 17.14070171165608900, -12.49999999999999600, 21.72866274630467500 ) ) ; +#8849 = FACE_OUTER_BOUND ( 'NONE', #1435, .T. ) ; +#8850 = CARTESIAN_POINT ( 'NONE', ( 36.27246672785344800, -31.11370696726761100, 25.20788164314815900 ) ) ; +#8851 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#8852 = EDGE_CURVE ( 'NONE', #8893, #8086, #313, .T. ) ; +#8853 = CARTESIAN_POINT ( 'NONE', ( 44.80809080867767600, -6.377880248845231700, 17.07868406321924600 ) ) ; +#8854 = CARTESIAN_POINT ( 'NONE', ( 8.822206419069191300, -95.07596123493895800, 14.95218780205850200 ) ) ; +#8855 = CARTESIAN_POINT ( 'NONE', ( 5.989174055557068500, -29.77362262089939900, 23.19169331977694900 ) ) ; +#8856 = CARTESIAN_POINT ( 'NONE', ( 6.746278686881241000, -34.13396898743295100, 12.66167394920721300 ) ) ; +#8857 = CARTESIAN_POINT ( 'NONE', ( 36.38172851698502800, -23.38953800939522800, -22.06278419262560300 ) ) ; +#8858 = CARTESIAN_POINT ( 'NONE', ( 11.16077346832141300, -30.22305336753277100, 26.99651656103109300 ) ) ; +#8859 = EDGE_LOOP ( 'NONE', ( #7893, #5624, #6307, #5485 ) ) ; +#8860 = CARTESIAN_POINT ( 'NONE', ( 2.264799924138874800, -9.153507856675059200, -23.35138224104719400 ) ) ; +#8861 = CARTESIAN_POINT ( 'NONE', ( 40.46094779820155200, -8.924465493335482300, -24.76463995021769200 ) ) ; +#8862 = CARTESIAN_POINT ( 'NONE', ( 32.66171537221575200, -30.52239938934104300, 27.49700142679425200 ) ) ; +#8863 = ORIENTED_EDGE ( 'NONE', *, *, #8975, .F. ) ; +#8864 = CARTESIAN_POINT ( 'NONE', ( 7.282156426162606200, -29.18578533763488300, 23.99003525693491300 ) ) ; +#8865 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -9.562556682370415100, -24.99999999999999600 ) ) ; +#8866 = CARTESIAN_POINT ( 'NONE', ( 13.35519292268857700, -30.80037300295578700, 27.81793636502042200 ) ) ; +#8867 = CARTESIAN_POINT ( 'NONE', ( 9.475101014162339300, -29.89525551797915500, 26.05858556610603900 ) ) ; +#8868 = CARTESIAN_POINT ( 'NONE', ( 44.97718969515806000, -5.492798784138210000, 16.43699712419707700 ) ) ; +#8869 = ORIENTED_EDGE ( 'NONE', *, *, #7325, .T. ) ; +#8870 = CARTESIAN_POINT ( 'NONE', ( 5.257870067905854800, -25.10678370712353000, 10.01126694314327500 ) ) ; +#8871 = CARTESIAN_POINT ( 'NONE', ( 37.42051596316366600, -100.0000000000000100, -4.448475004225463700 ) ) ; +#8872 = ORIENTED_EDGE ( 'NONE', *, *, #11133, .F. ) ; +#8873 = EDGE_CURVE ( 'NONE', #6820, #5963, #10835, .T. ) ; +#8874 = CARTESIAN_POINT ( 'NONE', ( -6.071532165918829600E-015, -5.995153973163897200, -18.26005213595214000 ) ) ; +#8875 = CARTESIAN_POINT ( 'NONE', ( 37.65165594419963200, -31.02845230201579300, 23.75141084786637800 ) ) ; +#8876 = EDGE_LOOP ( 'NONE', ( #3165, #12914, #11637, #11935 ) ) ; +#8877 = CARTESIAN_POINT ( 'NONE', ( 27.42475935508992200, -22.10287179087163200, -27.13406284077936800 ) ) ; +#8878 = EDGE_CURVE ( 'NONE', #3014, #5941, #11163, .T. ) ; +#8879 = CARTESIAN_POINT ( 'NONE', ( 34.42189306117500500, -30.15751582296075400, 26.71477835838293700 ) ) ; +#8880 = CARTESIAN_POINT ( 'NONE', ( 35.58845290060268200, -29.74248463372794400, 25.95747797619710800 ) ) ; +#8881 = ORIENTED_EDGE ( 'NONE', *, *, #13021, .F. ) ; +#8882 = AXIS2_PLACEMENT_3D ( 'NONE', #5258, #12355, #6300 ) ; +#8883 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -90.07596123493895800, -4.350951650170483900 ) ) ; +#8884 = VERTEX_POINT ( 'NONE', #4689 ) ; +#8885 = CLOSED_SHELL ( 'NONE', ( #10825, #6627, #5560, #5545, #7524, #9711, #7475, #4601, #10636, #10299, #11232, #12581, #5076, #4964, #7586, #7722, #2351, #9464, #7323, #10447, #6509, #11452, #9325, #12337, #9313, #11169, #11567, #9250, #4736, #11578, #5346, #8187, #10685, #5976, #9999, #7659, #8529, #7647, #1957, #260, #4520, #9636, #54, #4269, #8728, #9513, #6935, #9011, #12324, #12640, #5907, #8667, #6770, #11100, #8394, #6427, #6436, #8595, #12031, #519, #8335, #10371, #11817, #10058, #10383, #11316, #4662, #5287, #12963, #11057, #5205, #3408, #13066, #2156, #124, #8123, #454, #7787, #10438, #5615, #4398, #8480, #9526, #3151, #11510, #6566, #11627, #11440, #2026, #2950, #8468, #1112, #9450, #10561, #3530, #5750, #9577, #6222, #6288, #11501, #6233, #6358, #10624, #4530, #6705, #8606, #9644, #2538, #11305, #4137, #7263, #10508, #3285, #980, #6153, #4903, #6016, #334, #12129, #12461, #4940, #2469, #5273, #11636, #10171, #191, #4204, #6496, #7534, #12393, #9385, #5359, #10311, #10518, #6371, #2281, #8540, #9055, #9396, #5689, #10991, #11698, #11757, #5480, #12522, #9589, #7053, #5007, #9116, #9181, #5488, #6084, #8325, #5137, #3020, #8263, #7250, #11364, #10570, #6642, #4330, #401, #12512, #7461, #6556, #8653, #11686, #1040, #7116, #8053, #7390, #11378, #3213, #12261, #8018, #7334, #7187, #10238, #10098, #5418, #8409 ) ) ; +#8886 = CARTESIAN_POINT ( 'NONE', ( 7.885125171970977400, -29.33833903589305700, 24.66217317577358200 ) ) ; +#8887 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8888 = CARTESIAN_POINT ( 'NONE', ( 6.794025325798359400, -30.90779168717035900, 23.02567345293212500 ) ) ; +#8889 = CARTESIAN_POINT ( 'NONE', ( 26.97525136919168900, -89.21338468287729000, 10.93317457922517900 ) ) ; +#8890 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8891 = CARTESIAN_POINT ( 'NONE', ( 38.64631956950516000, -28.96884123044993900, 22.62256164136119100 ) ) ; +#8892 = CARTESIAN_POINT ( 'NONE', ( 8.428484508890475600, -23.36569906856826200, -21.82144602512191200 ) ) ; +#8893 = VERTEX_POINT ( 'NONE', #2702 ) ; +#8894 = CARTESIAN_POINT ( 'NONE', ( 36.28402583094293700, -29.94668327957179300, 25.61514911838380500 ) ) ; +#8895 = VERTEX_POINT ( 'NONE', #9835 ) ; +#8896 = CARTESIAN_POINT ( 'NONE', ( 34.49407894617425500, -16.63655602679789800, -24.80432773142106100 ) ) ; +#8897 = CARTESIAN_POINT ( 'NONE', ( 26.83419401120255200, -23.90337528223350500, -27.34004594763992900 ) ) ; +#8898 = EDGE_CURVE ( 'NONE', #12584, #8244, #8162, .T. ) ; +#8899 = ORIENTED_EDGE ( 'NONE', *, *, #11179, .T. ) ; +#8900 = CARTESIAN_POINT ( 'NONE', ( 44.97594744358637100, -5.566860759464132600, 16.28241092691172300 ) ) ; +#8901 = CARTESIAN_POINT ( 'NONE', ( 12.24953939329098200, -94.71789415301897500, 17.47341708256175300 ) ) ; +#8902 = CARTESIAN_POINT ( 'NONE', ( 6.794025325798359400, -30.90779168717035900, 23.02567345293212500 ) ) ; +#8903 = CARTESIAN_POINT ( 'NONE', ( 5.248481179213862400, -29.45032187791085600, 17.69785893835621900 ) ) ; +#8904 = CARTESIAN_POINT ( 'NONE', ( 44.15492000030769800, -7.781481582006808400, -21.43596316074798800 ) ) ; +#8905 = CARTESIAN_POINT ( 'NONE', ( 11.23205852882537500, -30.73219211015957700, 27.01329672274807700 ) ) ; +#8906 = CARTESIAN_POINT ( 'NONE', ( 11.71836243510540000, -19.27608940775584400, 20.83252696470016500 ) ) ; +#8907 = CARTESIAN_POINT ( 'NONE', ( 40.86163949413058600, -7.346822827176008100, 25.00000000000000000 ) ) ; +#8908 = VERTEX_POINT ( 'NONE', #9788 ) ; +#8909 = CARTESIAN_POINT ( 'NONE', ( 39.99920780869710800, -11.25842834963744100, -23.71480893771007100 ) ) ; +#8910 = CARTESIAN_POINT ( 'NONE', ( 32.66701314713175500, -30.75371723899747400, 27.47266561865237500 ) ) ; +#8911 = PERSON_AND_ORGANIZATION ( #10194, #1109 ) ; +#8912 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -8.322854396240265200E-015, 25.00000000000000000 ) ) ; +#8913 = CARTESIAN_POINT ( 'NONE', ( 7.265068426420340200, -29.18165191348701600, 23.96936020221225400 ) ) ; +#8914 = VERTEX_POINT ( 'NONE', #6814 ) ; +#8915 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -90.21328256873584900, -4.026587092778765300 ) ) ; +#8916 = CARTESIAN_POINT ( 'NONE', ( 13.35395154854135500, -30.74578465084346500, 27.82613140709606700 ) ) ; +#8917 = CARTESIAN_POINT ( 'NONE', ( 9.531484639338614800, -30.93435509774750300, 25.99006083018202800 ) ) ; +#8918 = CARTESIAN_POINT ( 'NONE', ( 0.07785841796037951100, 10.13070237256533300, 18.20976545616827700 ) ) ; +#8919 = CARTESIAN_POINT ( 'NONE', ( 11.02205156466577000, -20.55242451424814500, 20.11887618646552800 ) ) ; +#8920 = CARTESIAN_POINT ( 'NONE', ( 31.66022420043982400, -100.0000000000000100, 4.680906571415836700 ) ) ; +#8921 = CARTESIAN_POINT ( 'NONE', ( 6.019598352619329500, -30.53877885498328100, 21.46298915216612000 ) ) ; +#8922 = CARTESIAN_POINT ( 'NONE', ( 37.88030452376362700, -29.87634146149283500, 24.46331063811952300 ) ) ; +#8923 = EDGE_LOOP ( 'NONE', ( #9549, #9666, #9825, #9846, #9987 ) ) ; +#8924 = CARTESIAN_POINT ( 'NONE', ( 33.57538067763752600, -20.93838546836192900, -24.67297403757827800 ) ) ; +#8925 = VECTOR ( 'NONE', #5771, 1000.000000000000000 ) ; +#8926 = CARTESIAN_POINT ( 'NONE', ( 34.45531209549678700, -30.71651902379646200, 26.68242682039711500 ) ) ; +#8927 = CARTESIAN_POINT ( 'NONE', ( 37.56896833068036300, -29.22189704705299500, 24.16563512222187500 ) ) ; +#8928 = EDGE_LOOP ( 'NONE', ( #3292, #3609, #3904, #4230 ) ) ; +#8929 = CARTESIAN_POINT ( 'NONE', ( 39.99551767580205600, -90.35152065070479900, -3.700058326307272600 ) ) ; +#8930 = CARTESIAN_POINT ( 'NONE', ( 7.768705918242191400, -30.60565496530544700, 24.89431247719831200 ) ) ; +#8931 = CARTESIAN_POINT ( 'NONE', ( 17.57595814859351400, -22.10341188096668600, -27.13415807324263400 ) ) ; +#8932 = CARTESIAN_POINT ( 'NONE', ( 8.750595172228736700, -31.16377714229361500, 25.16699513661371100 ) ) ; +#8933 = CARTESIAN_POINT ( 'NONE', ( 44.92004164221550200, 10.14820631820838800, -22.98400832844311700 ) ) ; +#8934 = EDGE_CURVE ( 'NONE', #9498, #275, #11116, .T. ) ; +#8935 = CARTESIAN_POINT ( 'NONE', ( 39.58361087390190400, -29.74295675094252500, 22.48666848997170200 ) ) ; +#8936 = LINE ( 'NONE', #10760, #818 ) ; +#8937 = CARTESIAN_POINT ( 'NONE', ( 28.27162851081119400, -33.18159435430129600, 26.28226339761568700 ) ) ; +#8938 = CARTESIAN_POINT ( 'NONE', ( 8.659500303224964700, -20.56059041876685000, -21.61097772328708500 ) ) ; +#8939 = CARTESIAN_POINT ( 'NONE', ( 36.28403898600926400, -30.85892174765662300, 25.45430428925618200 ) ) ; +#8940 = CARTESIAN_POINT ( 'NONE', ( 6.904070061520109800, -10.18943448098111300, 25.00000000000000000 ) ) ; +#8941 = CARTESIAN_POINT ( 'NONE', ( 28.67656073104672700, -20.84128210706884900, -26.45818652753979800 ) ) ; +#8942 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000700, -95.07596123493894400, 16.93034213569669100 ) ) ; +#8943 = CARTESIAN_POINT ( 'NONE', ( 6.150242947779475800, -30.13218867231029900, 23.39254326700865900 ) ) ; +#8944 = CARTESIAN_POINT ( 'NONE', ( 7.744115209009218700, -31.07415537202843200, 14.98628702464911600 ) ) ; +#8945 = CARTESIAN_POINT ( 'NONE', ( 11.25381459594281400, -30.27891857120287300, 27.04478248458756800 ) ) ; +#8946 = LINE ( 'NONE', #4623, #11633 ) ; +#8947 = CARTESIAN_POINT ( 'NONE', ( 8.735324390575096100, -19.42600949414733700, 18.17658569135531000 ) ) ; +#8948 = CARTESIAN_POINT ( 'NONE', ( 32.83888070863569200, -20.37058582452021900, 20.96007980120673500 ) ) ; +#8949 = CARTESIAN_POINT ( 'NONE', ( 41.10822491753884100, -10.11518503955294800, -23.31373398732836200 ) ) ; +#8950 = EDGE_LOOP ( 'NONE', ( #10158, #10273, #10419, #10444, #10578, #10601 ) ) ; +#8951 = CARTESIAN_POINT ( 'NONE', ( 32.66169991667995000, -30.96191576474605300, 27.41945683642081400 ) ) ; +#8952 = CARTESIAN_POINT ( 'NONE', ( 19.98569541438082500, -27.96569311826356600, 27.45698462486280500 ) ) ; +#8953 = CARTESIAN_POINT ( 'NONE', ( 7.231267159639771500, -29.17349001780681700, 23.92816450710717300 ) ) ; +#8954 = CARTESIAN_POINT ( 'NONE', ( 1.247123260996849200, 11.66957896172732800, -22.75057534780069400 ) ) ; +#8955 = CARTESIAN_POINT ( 'NONE', ( 13.56046130417617200, -30.82089543988074700, 27.87799032745212100 ) ) ; +#8956 = CARTESIAN_POINT ( 'NONE', ( 9.500307283608538700, -30.23031480300797800, 26.16356611495816900 ) ) ; +#8957 = CARTESIAN_POINT ( 'NONE', ( 14.26499325809063700, -94.74154463553627200, 18.01716254689250400 ) ) ; +#8958 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#8959 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 9.500000000000000000, 22.50000000000000700 ) ) ; +#8960 = CARTESIAN_POINT ( 'NONE', ( 5.015409671706467300, -29.59468410353903100, 21.62945744988961400 ) ) ; +#8961 = CARTESIAN_POINT ( 'NONE', ( 37.65622398598894400, -30.88832264185851200, 24.07646483533147500 ) ) ; +#8962 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3517, #2377, #3115, #3090, #3074, #3033 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( -5.999999999837772800E-008, 0.002645829537385522900, 0.005291719074771043800 ), + .UNSPECIFIED. ) ; +#8963 = CARTESIAN_POINT ( 'NONE', ( 29.17542585456648400, -15.24828540226008800, -25.92541431887679700 ) ) ; +#8964 = FACE_BOUND ( 'NONE', #6220, .T. ) ; +#8965 = CARTESIAN_POINT ( 'NONE', ( 34.12541638131987300, -30.14687749673142700, 26.85317899280168800 ) ) ; +#8966 = CARTESIAN_POINT ( 'NONE', ( 38.35820324431692500, -29.03469718425263900, 23.11380951708445500 ) ) ; +#8967 = CARTESIAN_POINT ( 'NONE', ( 7.717823953502380300, -18.00631045710611700, -22.35641619050734300 ) ) ; +#8968 = CARTESIAN_POINT ( 'NONE', ( 1.074843231923593900, 11.67345981010883400, -23.92515676807613200 ) ) ; +#8969 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11894, #11654, #11528, #11520, #11499, #11487, #11480, #11445, #11434, #11414 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.2500000000000000000, 0.5000000000000000000, 0.7500000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#8970 = CARTESIAN_POINT ( 'NONE', ( 7.931586985089070100, -29.58139077587614100, 24.89501789280743800 ) ) ; +#8971 = CARTESIAN_POINT ( 'NONE', ( 17.15042962303794700, -17.92167457108455900, -26.39680495927430900 ) ) ; +#8972 = CARTESIAN_POINT ( 'NONE', ( 10.96938976710126700, -31.08742267913172000, 26.74019127842598600 ) ) ; +#8973 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.734723475976807600E-016, -1.000000000000000000 ) ) ; +#8974 = CARTESIAN_POINT ( 'NONE', ( 42.87669339561173800, 11.15206692787415900, -24.38346697805857500 ) ) ; +#8975 = EDGE_CURVE ( 'NONE', #8908, #8691, #996, .T. ) ; +#8976 = CARTESIAN_POINT ( 'NONE', ( 38.67498887671568000, -30.74090324820964100, 22.30937702078023200 ) ) ; +#8977 = CYLINDRICAL_SURFACE ( 'NONE', #5400, 15.00000000000000200 ) ; +#8978 = CARTESIAN_POINT ( 'NONE', ( 38.94931178141215600, -30.55092223628112100, 21.46123905850131000 ) ) ; +#8979 = CARTESIAN_POINT ( 'NONE', ( 8.610682553492210900, -23.38780644721611400, -22.04533923803715500 ) ) ; +#8980 = CARTESIAN_POINT ( 'NONE', ( 36.02254888405160200, -29.68884136477833400, 25.66748490537174000 ) ) ; +#8981 = CARTESIAN_POINT ( 'NONE', ( 9.883234284116769100, -9.863764679443825400, 25.00000000000000000 ) ) ; +#8982 = CARTESIAN_POINT ( 'NONE', ( 32.93392544352654700, -18.03621919355045100, -26.10352015549371500 ) ) ; +#8983 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#8984 = DIRECTION ( 'NONE', ( -0.02203124760617600200, -0.9997572826085916500, 0.0000000000000000000 ) ) ; +#8985 = CARTESIAN_POINT ( 'NONE', ( 6.770748008349773500, -29.08891020192250600, 23.35548417869017600 ) ) ; +#8986 = CARTESIAN_POINT ( 'NONE', ( 6.976185070376079300, -34.50405460810320300, 13.02045795559515700 ) ) ; +#8987 = CARTESIAN_POINT ( 'NONE', ( 15.21628119899110500, -99.99999999999998600, 21.23471675491299500 ) ) ; +#8988 = CARTESIAN_POINT ( 'NONE', ( 11.43689824377604800, -30.88939028590208500, 27.06053367533803200 ) ) ; +#8989 = CYLINDRICAL_SURFACE ( 'NONE', #7140, 1.200000000000003100 ) ; +#8990 = CARTESIAN_POINT ( 'NONE', ( 6.563155030302004500, -19.61384448209846100, 14.84831380890089400 ) ) ; +#8991 = CARTESIAN_POINT ( 'NONE', ( 39.93590397938048400, -26.09290632542713300, 8.383960475288553500 ) ) ; +#8992 = CARTESIAN_POINT ( 'NONE', ( 32.25983472166946300, -30.73932424581981200, 27.62359791451671100 ) ) ; +#8993 = CARTESIAN_POINT ( 'NONE', ( 17.80672553447438500, -39.40498971363391000, 19.69196865476509100 ) ) ; +#8994 = CARTESIAN_POINT ( 'NONE', ( 7.165154167076667400, -29.15758215339312900, 23.84640237757728800 ) ) ; +#8995 = CARTESIAN_POINT ( 'NONE', ( 39.97767627115358400, -90.62648002293805400, -3.049649405732264300 ) ) ; +#8996 = CARTESIAN_POINT ( 'NONE', ( 13.55976269187453600, -30.78890933186510300, 27.88326359025530400 ) ) ; +#8997 = CARTESIAN_POINT ( 'NONE', ( 24.81280744310813100, -30.86501923738226700, 26.28236762573407100 ) ) ; +#8998 = ORIENTED_EDGE ( 'NONE', *, *, #9795, .F. ) ; +#8999 = CARTESIAN_POINT ( 'NONE', ( 9.856456035663228500, -31.13968463137243200, 26.04943674352079300 ) ) ; +#9000 = VERTEX_POINT ( 'NONE', #821 ) ; +#9001 = CARTESIAN_POINT ( 'NONE', ( 10.35700883692368600, -14.53296290294152700, -24.98951529005348200 ) ) ; +#9002 = DIRECTION ( 'NONE', ( 0.8183143051756438500, -0.5747709960887930100, 0.0000000000000000000 ) ) ; +#9003 = CARTESIAN_POINT ( 'NONE', ( 6.050532450418025100, -28.87042599059481800, 21.75716416133746400 ) ) ; +#9004 = CIRCLE ( 'NONE', #8766, 2.000000000000001800 ) ; +#9005 = CARTESIAN_POINT ( 'NONE', ( 37.52344570695095900, -29.47935840357747500, 24.46689925076396900 ) ) ; +#9006 = CARTESIAN_POINT ( 'NONE', ( 36.82774569122802400, -15.64976033537579900, -25.99620518166182100 ) ) ; +#9007 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #9709, #4599, #6683, #604 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 0.5000000620918260100 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9899186996617245200, 0.9899186996617245200, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#9008 = CARTESIAN_POINT ( 'NONE', ( 34.16273710315275000, -30.61417877401978100, 26.84937303228725700 ) ) ; +#9009 = CARTESIAN_POINT ( 'NONE', ( 38.73434444010463600, -28.94630115495937200, 22.42817229970909300 ) ) ; +#9010 = ORIENTED_EDGE ( 'NONE', *, *, #11441, .T. ) ; +#9011 = ADVANCED_FACE ( 'NONE', ( #45 ), #8775, .F. ) ; +#9012 = CARTESIAN_POINT ( 'NONE', ( 39.96431803972871000, -90.76369240601830800, -2.724612049315012600 ) ) ; +#9013 = CARTESIAN_POINT ( 'NONE', ( 8.260358896873043500, -30.98308774250234500, 24.94258215379388600 ) ) ; +#9014 = FACE_OUTER_BOUND ( 'NONE', #10292, .T. ) ; +#9015 = CARTESIAN_POINT ( 'NONE', ( 8.613734505300021400, -19.62013633504079400, -22.49055208508156400 ) ) ; +#9016 = CARTESIAN_POINT ( 'NONE', ( 13.55966201846201700, -30.84522177571969000, 27.87327597101932500 ) ) ; +#9017 = CARTESIAN_POINT ( 'NONE', ( 10.76672737588854500, -19.59102514425887900, -24.54913428720296400 ) ) ; +#9018 = CARTESIAN_POINT ( 'NONE', ( 43.21138683565247600, 11.93868149410292600, -23.21138683565324400 ) ) ; +#9019 = CARTESIAN_POINT ( 'NONE', ( 39.16398829459168200, -29.41577327692894500, 22.76182110611779700 ) ) ; +#9020 = ORIENTED_EDGE ( 'NONE', *, *, #6118, .T. ) ; +#9021 = CARTESIAN_POINT ( 'NONE', ( 2.300428045475218400, -9.284695385921352800, 18.27734144655811500 ) ) ; +#9022 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#9023 = ORIENTED_EDGE ( 'NONE', *, *, #12651, .T. ) ; +#9024 = CARTESIAN_POINT ( 'NONE', ( 36.16217672364961500, -30.57000049604060300, 25.71273069371360300 ) ) ; +#9025 = EDGE_CURVE ( 'NONE', #12468, #1873, #6386, .T. ) ; +#9026 = CARTESIAN_POINT ( 'NONE', ( 10.63287816929064000, -12.50080633556963900, 24.44002808487050900 ) ) ; +#9027 = CARTESIAN_POINT ( 'NONE', ( 36.01129695574722700, -23.43108429077848200, -22.48386026002603100 ) ) ; +#9028 = EDGE_CURVE ( 'NONE', #9498, #4849, #3983, .T. ) ; +#9029 = ORIENTED_EDGE ( 'NONE', *, *, #10866, .T. ) ; +#9030 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -97.57596123416667000, 12.92974142702268400 ) ) ; +#9031 = CARTESIAN_POINT ( 'NONE', ( 0.03766924608056333700, -7.627153066785868200, -18.77522856075130200 ) ) ; +#9032 = CARTESIAN_POINT ( 'NONE', ( 6.557439393738894400, -30.51097768641771100, 23.61285349218746900 ) ) ; +#9033 = CARTESIAN_POINT ( 'NONE', ( 5.382357690231208900, -29.76299867618125500, 18.89891774503384500 ) ) ; +#9034 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000900, 16.29999999999999000 ) ) ; +#9035 = CARTESIAN_POINT ( 'NONE', ( 11.43689734645859900, -30.46746679950438300, 27.13493303773181300 ) ) ; +#9036 = ORIENTED_EDGE ( 'NONE', *, *, #10378, .F. ) ; +#9037 = CARTESIAN_POINT ( 'NONE', ( 5.432160173331876500, -19.79298881480048400, 11.67399054302342200 ) ) ; +#9038 = CARTESIAN_POINT ( 'NONE', ( 44.15492000030462100, -8.389711229385248700, -19.69998625431989900 ) ) ; +#9039 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8904, #5721, #9907, #3781, #10917, #4809, #11927, #5844 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0005194614442824154700, 0.001038922888564830900, 0.002077845777129673200 ), + .UNSPECIFIED. ) ; +#9040 = ORIENTED_EDGE ( 'NONE', *, *, #1118, .F. ) ; +#9041 = CARTESIAN_POINT ( 'NONE', ( 32.78108666576393700, -10.01953452817545000, -24.99999999999999300 ) ) ; +#9042 = CARTESIAN_POINT ( 'NONE', ( 32.25927950790356400, -30.89796050659379700, 27.59036909615726800 ) ) ; +#9043 = CARTESIAN_POINT ( 'NONE', ( 7.583885619671893800, -35.31363816629308900, 13.85523139814303100 ) ) ; +#9044 = CARTESIAN_POINT ( 'NONE', ( 7.111007358310092600, -29.14464630720297600, 23.77743873799006000 ) ) ; +#9045 = ORIENTED_EDGE ( 'NONE', *, *, #2381, .F. ) ; +#9046 = CARTESIAN_POINT ( 'NONE', ( 13.66300390309784200, -30.82952424215574900, 27.90731601945671900 ) ) ; +#9047 = CARTESIAN_POINT ( 'NONE', ( 9.763441087922181800, -30.48583907178466400, 26.31937323832996600 ) ) ; +#9048 = AXIS2_PLACEMENT_3D ( 'NONE', #10827, #8851, #712 ) ; +#9049 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -5.000000000000000900, 16.06938735382976400 ) ) ; +#9050 = CARTESIAN_POINT ( 'NONE', ( 33.27270497235503700, -97.48437145496136200, 20.81752712021741300 ) ) ; +#9051 = ORIENTED_EDGE ( 'NONE', *, *, #4922, .F. ) ; +#9052 = CARTESIAN_POINT ( 'NONE', ( 5.067486002669759200, -29.94471044928159400, 21.63617811178983500 ) ) ; +#9053 = CARTESIAN_POINT ( 'NONE', ( 37.73466951371411000, -30.54957625843133000, 24.48279305494420700 ) ) ; +#9054 = VERTEX_POINT ( 'NONE', #9049 ) ; +#9055 = ADVANCED_FACE ( 'NONE', ( #7843 ), #1658, .T. ) ; +#9056 = EDGE_CURVE ( 'NONE', #752, #8261, #12825, .T. ) ; +#9057 = CARTESIAN_POINT ( 'NONE', ( 34.12551806062420900, -31.09358374361254800, 26.68646869953051800 ) ) ; +#9058 = CARTESIAN_POINT ( 'NONE', ( 28.50066813881424100, -20.01385634412568800, 22.81368892163532500 ) ) ; +#9059 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -97.08917251800396300, 7.821153000182040800 ) ) ; +#9060 = AXIS2_PLACEMENT_3D ( 'NONE', #7506, #1399, #8531 ) ; +#9061 = CARTESIAN_POINT ( 'NONE', ( 39.91122825414324600, -91.17399001271009200, -1.749757557770189200 ) ) ; +#9062 = EDGE_LOOP ( 'NONE', ( #2546, #2871, #3666, #4133 ) ) ; +#9063 = CARTESIAN_POINT ( 'NONE', ( 8.129379883817888300, -30.05324975015665600, 25.26502415889926900 ) ) ; +#9064 = CARTESIAN_POINT ( 'NONE', ( 8.172491516592407000, -15.64987968511525000, -25.99622622624604100 ) ) ; +#9065 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000000, -17.49999999999999600 ) ) ; +#9066 = ORIENTED_EDGE ( 'NONE', *, *, #10404, .T. ) ; +#9067 = CARTESIAN_POINT ( 'NONE', ( 38.91485577205750000, -30.58074861937893700, 22.54130590920744500 ) ) ; +#9068 = CARTESIAN_POINT ( 'NONE', ( 7.005992429774945400, -29.11966858363169300, 23.64110376950843300 ) ) ; +#9069 = CARTESIAN_POINT ( 'NONE', ( 35.91853115601134000, -29.65171647427614900, 25.71303104184147500 ) ) ; +#9070 = CARTESIAN_POINT ( 'NONE', ( 34.65853425045796100, -14.44492233035578700, -24.99176736556356100 ) ) ; +#9071 = CARTESIAN_POINT ( 'NONE', ( 37.84714414260177800, -20.44335740064433800, -19.56563498912176200 ) ) ; +#9072 = EDGE_CURVE ( 'NONE', #5692, #4, #5094, .T. ) ; +#9073 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -95.28490972493069900, 8.995309444721005600 ) ) ; +#9074 = CARTESIAN_POINT ( 'NONE', ( 6.764910441176311900, -7.728320998288570100, -28.21036596403692100 ) ) ; +#9075 = FACE_BOUND ( 'NONE', #3194, .T. ) ; +#9076 = CARTESIAN_POINT ( 'NONE', ( 6.711560507812096800, -29.41390784971111600, 23.71781465782495200 ) ) ; +#9077 = CARTESIAN_POINT ( 'NONE', ( 8.358414989984652300, -31.22753124919109500, 15.77685882675774900 ) ) ; +#9078 = CARTESIAN_POINT ( 'NONE', ( 32.05501749002025500, -30.79227570704917500, 27.68559118349229200 ) ) ; +#9079 = EDGE_LOOP ( 'NONE', ( #4392, #5053, #5519 ) ) ; +#9080 = DIRECTION ( 'NONE', ( -6.833476513896989600E-016, -0.1736481776669238900, 0.9848077530122092400 ) ) ; +#9081 = CARTESIAN_POINT ( 'NONE', ( 11.54570659355999300, -31.01274001193169700, 27.06058883580618300 ) ) ; +#9082 = CARTESIAN_POINT ( 'NONE', ( 5.096903266894340600, -19.90133983760037100, 9.753565197333596600 ) ) ; +#9083 = CARTESIAN_POINT ( 'NONE', ( 42.76890144772955400, -10.09473026914943400, 17.22012354041102400 ) ) ; +#9084 = CARTESIAN_POINT ( 'NONE', ( 33.59196571616739400, -9.948578854425393900, -25.00000000000000000 ) ) ; +#9085 = CARTESIAN_POINT ( 'NONE', ( 5.021361612635084600, -27.95608274215032600, 7.441755464447498800 ) ) ; +#9086 = CARTESIAN_POINT ( 'NONE', ( 6.940353240395606500, -29.10420951247208200, 23.55233825038784800 ) ) ; +#9087 = CARTESIAN_POINT ( 'NONE', ( 0.06154932577090519600, -13.38034941310287500, -24.93511994749309600 ) ) ; +#9088 = CARTESIAN_POINT ( 'NONE', ( 13.66300362045339300, -30.81332054374059500, 27.91017308632937600 ) ) ; +#9089 = LINE ( 'NONE', #5116, #3942 ) ; +#9090 = CARTESIAN_POINT ( 'NONE', ( 9.861099609984565400, -29.86706221914998900, 26.26612552855232600 ) ) ; +#9091 = CARTESIAN_POINT ( 'NONE', ( 1.339512078731873900, -8.409633384976659800, 18.68979691206392600 ) ) ; +#9092 = ORIENTED_EDGE ( 'NONE', *, *, #3337, .T. ) ; +#9093 = CARTESIAN_POINT ( 'NONE', ( 5.817238614243926500, -30.35988450131568700, 20.90680985567113800 ) ) ; +#9094 = CARTESIAN_POINT ( 'NONE', ( 27.08722976564870800, -94.74615160632971800, 18.64596703651642400 ) ) ; +#9095 = CARTESIAN_POINT ( 'NONE', ( 5.975421685348902800, -28.91146545269027300, 21.81777319084943700 ) ) ; +#9096 = CARTESIAN_POINT ( 'NONE', ( 37.11452382739764000, -29.33826673068762900, 24.66231323465544600 ) ) ; +#9097 = CARTESIAN_POINT ( 'NONE', ( 25.03596262505269000, -27.96616263879851900, 27.45684688369687600 ) ) ; +#9098 = CARTESIAN_POINT ( 'NONE', ( 34.06036938609216200, -30.49084264759674700, 26.91024526391423400 ) ) ; +#9099 = CARTESIAN_POINT ( 'NONE', ( 28.04638616278412000, -27.29302315273449500, 21.64088748822880600 ) ) ; +#9100 = VECTOR ( 'NONE', #12799, 1000.000000000000000 ) ; +#9101 = CARTESIAN_POINT ( 'NONE', ( 39.85842923422121900, -91.44578095652039500, -1.100220238167002800 ) ) ; +#9102 = CARTESIAN_POINT ( 'NONE', ( 8.506210115621298600, -31.15284526904264300, 24.95397727652750000 ) ) ; +#9103 = CARTESIAN_POINT ( 'NONE', ( 0.5276986232573861500, -11.05559114545476600, 7.962023441833304500 ) ) ; +#9104 = CARTESIAN_POINT ( 'NONE', ( 24.99264576486653400, -27.96523496585091800, 27.45710953202296900 ) ) ; +#9105 = AXIS2_PLACEMENT_3D ( 'NONE', #9132, #13056, #8115 ) ; +#9106 = CARTESIAN_POINT ( 'NONE', ( 38.47303967857602200, -29.14972241767605600, 23.18903995491969600 ) ) ; +#9107 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3456, #2580, #2428, #2405, #2394, #2387, #2357, #2345, #2311, #2301 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 5.763174608673125000E-015, 0.001764524787662163100, 0.002646787181490362100, 0.003087918378404459500, 0.003529049575318556900 ), + .UNSPECIFIED. ) ; +#9108 = CARTESIAN_POINT ( 'NONE', ( 6.550386225508762400, -29.01365821539584300, 22.96476112286522000 ) ) ; +#9109 = VECTOR ( 'NONE', #1230, 1000.000000000000000 ) ; +#9110 = CARTESIAN_POINT ( 'NONE', ( 36.07615370227458800, -30.38477345693288700, 25.81382188672657600 ) ) ; +#9111 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#9112 = CARTESIAN_POINT ( 'NONE', ( 40.01832768854031000, -17.96259517206030400, -17.59054305259974200 ) ) ; +#9113 = ORIENTED_EDGE ( 'NONE', *, *, #11979, .F. ) ; +#9114 = CARTESIAN_POINT ( 'NONE', ( 38.57615936669637300, -94.27290945639644800, 6.529463264191527100 ) ) ; +#9115 = CARTESIAN_POINT ( 'NONE', ( 16.09110267340651000, -9.999999999999996400, -31.49758651677715800 ) ) ; +#9116 = ADVANCED_FACE ( 'NONE', ( #4768 ), #12453, .F. ) ; +#9117 = CARTESIAN_POINT ( 'NONE', ( 6.922550067143729000, -30.86287149163236500, 23.47388782878428900 ) ) ; +#9118 = VECTOR ( 'NONE', #12921, 1000.000000000000000 ) ; +#9119 = CARTESIAN_POINT ( 'NONE', ( 7.484468725725512300, -35.20455389413000100, 13.73440247329386200 ) ) ; +#9120 = CARTESIAN_POINT ( 'NONE', ( 32.05554517603491900, -30.90302545479251600, 27.66109328018372800 ) ) ; +#9121 = CARTESIAN_POINT ( 'NONE', ( 11.52950295286093600, -30.63064104272504900, 27.16503870556404000 ) ) ; +#9122 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#9123 = CARTESIAN_POINT ( 'NONE', ( 8.594096393242377700, -12.49999999999997300, -15.43446239232906200 ) ) ; +#9125 = EDGE_CURVE ( 'NONE', #10335, #6144, #9886, .T. ) ; +#9124 = CARTESIAN_POINT ( 'NONE', ( 33.73181877275506900, -11.48010687544177900, -25.07086568892076500 ) ) ; +#9126 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8389, #8364, #10456, #10421, #10410, #8353 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001722382135847722600, 0.003444764271695445100 ), + .UNSPECIFIED. ) ; +#9127 = CARTESIAN_POINT ( 'NONE', ( 6.542563274834603400, -29.01184681450347100, 22.95163721892076600 ) ) ; +#9128 = CARTESIAN_POINT ( 'NONE', ( 28.50066813881424500, -20.01385634412569200, 22.81368892163532500 ) ) ; +#9129 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375000, -30.82654731344970500, 27.93780948130440600 ) ) ; +#9130 = DIRECTION ( 'NONE', ( 0.9255621191892539100, -0.3785957785315326500, 0.0000000000000000000 ) ) ; +#9131 = EDGE_CURVE ( 'NONE', #9677, #12468, #10135, .T. ) ; +#9132 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000900, 17.50000000000000400 ) ) ; +#9133 = AXIS2_PLACEMENT_3D ( 'NONE', #9136, #3013, #10138 ) ; +#9134 = CARTESIAN_POINT ( 'NONE', ( 9.959118798505821600, -30.65844157765688400, 26.39012451350363300 ) ) ; +#9135 = CIRCLE ( 'NONE', #4388, 4.999999999999999100 ) ; +#9136 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000900, 17.50000000000000400 ) ) ; +#9137 = CARTESIAN_POINT ( 'NONE', ( 39.18777559780339500, -11.67898559221426800, -25.00000000002295400 ) ) ; +#9138 = CARTESIAN_POINT ( 'NONE', ( 5.530523975070063400, -30.33482344782364100, 21.63031543048937900 ) ) ; +#9139 = CARTESIAN_POINT ( 'NONE', ( 37.46379118720467000, -30.32633220245701700, 24.85654311647989800 ) ) ; +#9140 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11186, #11173, #10896, #10878, #10854, #10842, #10813, #10771, #10755, #10725, #10669, #10642, #10559, #10550, #10543, #10524, #10513, #10505, #10482, #10467, #10436, #10375, #10366, #10345, #10321, #10297 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002463547768589865300, 0.003695321652884798400, 0.004927095537179730600, 0.007390643305769609800, 0.008622417190064549400, 0.009854191074359487300, 0.01231773884294934400, 0.01354951272724427800, 0.01478128661153920800, 0.01601306049583413000, 0.01724483438012905400, 0.01970838214871890200 ), + .UNSPECIFIED. ) ; +#9141 = CARTESIAN_POINT ( 'NONE', ( 5.815393296288749300, -28.86024347650425200, 21.16658790138377800 ) ) ; +#9142 = CARTESIAN_POINT ( 'NONE', ( 34.04307058152865300, -30.99024260115981000, 26.78497890169385100 ) ) ; +#9143 = CARTESIAN_POINT ( 'NONE', ( 29.98556693719039900, -27.27891594822055400, 21.10949545199152400 ) ) ; +#9144 = CARTESIAN_POINT ( 'NONE', ( 39.65208285240929300, -92.25049923906563300, 0.8498367078638577900 ) ) ; +#9145 = CARTESIAN_POINT ( 'NONE', ( 8.279817087841985700, -30.33780728461497800, 25.38530167457226100 ) ) ; +#9146 = CARTESIAN_POINT ( 'NONE', ( 9.636322736163892300, -10.46828713121850100, 24.91742834404761800 ) ) ; +#9147 = CARTESIAN_POINT ( 'NONE', ( 2.772636507046025500E-014, -10.00002403661582700, 8.006208319682329500 ) ) ; +#9148 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999990800, -10.00006296935297800, -11.51700383242094000 ) ) ; +#9149 = EDGE_CURVE ( 'NONE', #4250, #5815, #7795, .T. ) ; +#9150 = CARTESIAN_POINT ( 'NONE', ( 38.98854609017296700, -30.23942625289538800, 23.10532703981760200 ) ) ; +#9151 = CARTESIAN_POINT ( 'NONE', ( 6.530914034811966800, -29.00915026276940300, 22.93202019080085200 ) ) ; +#9152 = LINE ( 'NONE', #3703, #8839 ) ; +#9153 = CARTESIAN_POINT ( 'NONE', ( 35.92600981798475600, -31.15113206845316500, 25.45956682580790800 ) ) ; +#9154 = CARTESIAN_POINT ( 'NONE', ( 39.94338539614350500, -22.50961012201232900, -13.32734034421576100 ) ) ; +#9155 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -93.58403201388095700, 0.4683135298431733700 ) ) ; +#9156 = CARTESIAN_POINT ( 'NONE', ( 39.45009588568308300, -92.77293695754218600, 2.147981999194840300 ) ) ; +#9157 = CARTESIAN_POINT ( 'NONE', ( -0.0001071532004998808000, -9.999999999999994700, -12.92752995180906900 ) ) ; +#9158 = CARTESIAN_POINT ( 'NONE', ( 6.551720645566342100, -29.87665204184940400, 23.89009988989636200 ) ) ; +#9159 = CARTESIAN_POINT ( 'NONE', ( 5.471865829034650000, -29.92734082028128000, 19.49139426586930000 ) ) ; +#9160 = CARTESIAN_POINT ( 'NONE', ( 31.74731883031391200, -30.78740758715216700, 27.78745382983116500 ) ) ; +#9161 = CARTESIAN_POINT ( 'NONE', ( 11.74385212410814100, -31.01957321644858500, 27.14724162181303800 ) ) ; +#9162 = VERTEX_POINT ( 'NONE', #5176 ) ; +#9163 = AXIS2_PLACEMENT_3D ( 'NONE', #12143, #1078, #8202 ) ; +#9164 = CARTESIAN_POINT ( 'NONE', ( 27.85929828834389700, -100.0000000000000100, -38.03890846183706700 ) ) ; +#9165 = CARTESIAN_POINT ( 'NONE', ( 15.95061562990622900, -12.49999999999999500, -22.26172372808876100 ) ) ; +#9166 = VECTOR ( 'NONE', #6942, 1000.000000000000000 ) ; +#9167 = CARTESIAN_POINT ( 'NONE', ( 10.26057644352793500, -12.19623197613733500, 24.38134862614858300 ) ) ; +#9168 = CARTESIAN_POINT ( 'NONE', ( 6.504326037109098700, -29.00299997008722000, 22.88673170911853200 ) ) ; +#9169 = CARTESIAN_POINT ( 'NONE', ( 8.844150695081900400, -20.57289990300270700, -21.82534421716926700 ) ) ; +#9170 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344970100, 27.93780948130440200 ) ) ; +#9171 = CARTESIAN_POINT ( 'NONE', ( 40.38682603977046200, -19.22634792045898400, -8.728121753129869400 ) ) ; +#9172 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9694, #2553, #4580, #11724, #5619, #12683, #6667, #586 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( -3.202057406576272200E-005, 0.0009453947022395771500, 0.001922809978544916900, 0.003877640531155583800 ), + .UNSPECIFIED. ) ; +#9173 = CARTESIAN_POINT ( 'NONE', ( 10.02987511110634400, -29.96587419032054500, 26.38978625818812400 ) ) ; +#9174 = CARTESIAN_POINT ( 'NONE', ( 37.18671926839812200, -12.50000000000001100, 12.18983455060894800 ) ) ; +#9175 = CARTESIAN_POINT ( 'NONE', ( 0.9905875069822016600, -7.998837704780868300, -20.53757729045571500 ) ) ; +#9176 = CARTESIAN_POINT ( 'NONE', ( 43.34313736066707200, -8.761746186264549200, 17.64976779035097100 ) ) ; +#9177 = ORIENTED_EDGE ( 'NONE', *, *, #9072, .T. ) ; +#9178 = CARTESIAN_POINT ( 'NONE', ( 5.530500021183661000, -29.13130469305053800, 21.84227612850254400 ) ) ; +#9179 = CARTESIAN_POINT ( 'NONE', ( 37.11373045865132500, -31.10585408871425600, 24.34978893077654000 ) ) ; +#9180 = ORIENTED_EDGE ( 'NONE', *, *, #5383, .F. ) ; +#9181 = ADVANCED_FACE ( 'NONE', ( #2396 ), #5398, .F. ) ; +#9182 = AXIS2_PLACEMENT_3D ( 'NONE', #3600, #3583, #3509 ) ; +#9183 = CARTESIAN_POINT ( 'NONE', ( 33.84961253347093900, -30.32195633582220800, 27.00281834176525900 ) ) ; +#9184 = CARTESIAN_POINT ( 'NONE', ( 36.60573090174198500, -28.81847303277676200, 25.07541288979734200 ) ) ; +#9185 = CARTESIAN_POINT ( 'NONE', ( 38.96353132733843700, -93.73150234348131000, 4.754760668154441200 ) ) ; +#9186 = ORIENTED_EDGE ( 'NONE', *, *, #4115, .T. ) ; +#9187 = ORIENTED_EDGE ( 'NONE', *, *, #12893, .T. ) ; +#9188 = CARTESIAN_POINT ( 'NONE', ( 8.506757197535426600, -29.49813916533970500, 25.24504355263458800 ) ) ; +#9189 = CARTESIAN_POINT ( 'NONE', ( 46.00224489095906900, -7.667251907538945600, -14.47913086914053200 ) ) ; +#9190 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, -8.817962925893342100, 8.134599012390401300 ) ) ; +#9191 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000700, -8.818730386220925900, -11.71557881851841500 ) ) ; +#9192 = CARTESIAN_POINT ( 'NONE', ( 37.41196763792062500, -31.43593262981818600, 24.96524374446032400 ) ) ; +#9193 = ORIENTED_EDGE ( 'NONE', *, *, #2286, .F. ) ; +#9194 = CARTESIAN_POINT ( 'NONE', ( 38.20698360012482900, -29.07124763769943200, 23.35057283306643300 ) ) ; +#9195 = CARTESIAN_POINT ( 'NONE', ( 6.453502675171125500, -28.99124850475496700, 22.79811502323024200 ) ) ; +#9196 = ORIENTED_EDGE ( 'NONE', *, *, #881, .F. ) ; +#9197 = CARTESIAN_POINT ( 'NONE', ( 35.86697072039167000, -30.16434988669510300, 25.93503002355553000 ) ) ; +#9198 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -19.99999999999990400, -7.373247840169503000 ) ) ; +#9199 = CARTESIAN_POINT ( 'NONE', ( 40.00340470680833200, -20.00318889043775200, -11.78001541498982800 ) ) ; +#9200 = ORIENTED_EDGE ( 'NONE', *, *, #3409, .F. ) ; +#9201 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #12070, #2927, #1956 ), + ( #9097, #2975, #10097 ), + ( #3973, #11124, #5005 ), + ( #12108, #6039, #13065 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 6.134827280711688600E-005 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7941272348232407700, 1.000000000000000000), + ( 1.000000000000000000, 0.7941353932014139100, 1.000000000000000000), + ( 1.000000000000000000, 0.7941422078754282200, 1.000000000000000000), + ( 1.000000000000000000, 0.7941476793044256500, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#9202 = ORIENTED_EDGE ( 'NONE', *, *, #4236, .F. ) ; +#9203 = CARTESIAN_POINT ( 'NONE', ( 38.67943688925177500, -94.17021105057592900, 6.064776497721513900 ) ) ; +#9204 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9167, #2037, #4049, #11197, #5084, #12184, #6113, #64, #7172, #1072, #8195, #2081 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 7.757919228897728500E-018, 0.0009655082219309786000, 0.001931016443861949400, 0.003862032887723889200, 0.005793049331585828900, 0.007724065775447768900 ), + .UNSPECIFIED. ) ; +#9205 = CARTESIAN_POINT ( 'NONE', ( 7.181075518890196500, -20.45480432629939600, -19.59061824515453100 ) ) ; +#9206 = CARTESIAN_POINT ( 'NONE', ( 7.177939756114390100, -30.99751533019466600, 23.54143711933097900 ) ) ; +#9207 = CARTESIAN_POINT ( 'NONE', ( 8.680691020934945700, -31.27097820553983400, 16.14989117472433800 ) ) ; +#9208 = CARTESIAN_POINT ( 'NONE', ( 31.74840950788556500, -30.86883660110365600, 27.77131748986035100 ) ) ; +#9209 = CARTESIAN_POINT ( 'NONE', ( 0.6269346401981192900, -7.945555530632328000, 16.32801680617364700 ) ) ; +#9210 = CARTESIAN_POINT ( 'NONE', ( 11.72836085924473800, -30.72943748120886900, 27.23438732633096400 ) ) ; +#9211 = CARTESIAN_POINT ( 'NONE', ( 35.85350530012107100, -100.0000000000000100, -31.96713653986547900 ) ) ; +#9212 = CARTESIAN_POINT ( 'NONE', ( 33.76859810595144800, -12.94501248769257800, 24.48071483989646400 ) ) ; +#9213 = VERTEX_POINT ( 'NONE', #4322 ) ; +#9214 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9215 = CARTESIAN_POINT ( 'NONE', ( 6.413899905557742400, -28.98205675107480800, 22.72559239036493400 ) ) ; +#9216 = CARTESIAN_POINT ( 'NONE', ( 7.914385828582122300, -18.00830798499578800, -22.59052839933402600 ) ) ; +#9217 = ORIENTED_EDGE ( 'NONE', *, *, #12893, .F. ) ; +#9218 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7590, #7999, #7619, #7521, #7509, #7481, #7466, #7435, #7419, #7297, #7279, #7247, #7235, #7192, #7160, #7143, #7113, #7096, #7070, #7057, #7028, #7011, #6979, #6958, #6927, #6910, #6871, #6825, #6795, #6778, #6750, #6736, #6723, #6709, #6693, #3198, #3169, #3121, #6677, #6666, #6633, #6617, #6600, #6584, #6570, #6553, #6542, #6529, #6513, #6502, #6487, #6469, #6453, #6424, #6379, #6286, #2636, #2605, #2508, #6271, #6239, #6226, #6183, #6103, #6088, #6060, #6045, #6014, #5968, #5952, #5924, #5908, #5884, #5869, #5777, #5755, #5715, #175, #5681, #5670 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 1, 1, 1, 1, 2, 2, 2, 1, 1, 1, 2, 2, 2, 2, 1, 1, 1, 2, 2, 2, 2, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 1, 1, 1, 2, 2, 2, 1, 1, 1, 2, 2, 2, 1, 1, 2, 2, 4 ), + ( 0.0000000000000000000, 0.03124999999998251400, 0.04687499999997344500, 0.05468749999996930200, 0.05859374999996720000, 0.06054687499996579800, 0.06152343749996543700, 0.06249999999996508300, 0.09374999999995065100, 0.1093749999999439100, 0.1171874999999404500, 0.1210937499999383300, 0.1230468749999372900, 0.1249999999999362200, 0.1874999999999026300, 0.2187499999998864200, 0.2343749999998776800, 0.2421874999998727400, 0.2460937499998704600, 0.2480468749998689700, 0.2499999999998674900, 0.3124999999998130400, 0.3437499999997858900, 0.3593749999997726300, 0.3671874999997659600, 0.3710937499997632400, 0.3730468749997616400, 0.3740234374997616900, 0.3749999999997617500, 0.4374999999998036600, 0.4687499999998256900, 0.4999999999998476800, 0.5624999999998930900, 0.5937499999999159600, 0.6093749999999283900, 0.6171874999999358300, 0.6210937499999392700, 0.6230468749999399400, 0.6249999999999406000, 0.6874999999999502600, 0.7187499999999552600, 0.7343749999999570300, 0.7421874999999588100, 0.7460937499999600300, 0.7499999999999611400, 0.8124999999999694700, 0.8437499999999744600, 0.8593749999999780200, 0.8671874999999796800, 0.8749999999999814600, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#9219 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -99.99999999999998600, -38.36942826376122900 ) ) ; +#9220 = CARTESIAN_POINT ( 'NONE', ( 10.36687307690941400, -30.89936585846545800, 26.51676440029356700 ) ) ; +#9221 = CARTESIAN_POINT ( 'NONE', ( 35.20383782689200600, -100.0000000000000300, 1.264554945771519500 ) ) ; +#9222 = CARTESIAN_POINT ( 'NONE', ( 1.134935333354586400, -8.179948046697235900, -21.81738776147512100 ) ) ; +#9223 = CARTESIAN_POINT ( 'NONE', ( 43.07879638266428700, -8.942019572329133600, 19.77176051979368100 ) ) ; +#9224 = CARTESIAN_POINT ( 'NONE', ( 6.018821417737462400, -30.57468187745868000, 21.70547732205632800 ) ) ; +#9225 = CARTESIAN_POINT ( 'NONE', ( 38.23510685140188100, -94.67499814371679200, 8.080013532756364500 ) ) ; +#9226 = CARTESIAN_POINT ( 'NONE', ( 37.25746016704282900, -30.10719716748900500, 25.01050072275587500 ) ) ; +#9227 = ORIENTED_EDGE ( 'NONE', *, *, #3341, .T. ) ; +#9228 = CARTESIAN_POINT ( 'NONE', ( 5.094888167865500300, -28.26511458542736200, 14.91581291319317700 ) ) ; +#9229 = EDGE_CURVE ( 'NONE', #3266, #2809, #3032, .T. ) ; +#9230 = ORIENTED_EDGE ( 'NONE', *, *, #11730, .T. ) ; +#9231 = CARTESIAN_POINT ( 'NONE', ( 33.86400770467110300, -30.79512214276480700, 26.95121268032798100 ) ) ; +#9232 = CARTESIAN_POINT ( 'NONE', ( 35.68575221225378200, -20.96067471907369400, 18.53416915079401100 ) ) ; +#9233 = CARTESIAN_POINT ( 'NONE', ( 11.52770616037285800, -15.85248344875691700, -25.18166357420453800 ) ) ; +#9234 = CARTESIAN_POINT ( 'NONE', ( 8.568572869797781900, -30.57871103708839700, 25.51748385811281800 ) ) ; +#9235 = CARTESIAN_POINT ( 'NONE', ( 26.25048237741343000, -7.494487863452156300, -32.98867371510161200 ) ) ; +#9236 = CARTESIAN_POINT ( 'NONE', ( 0.5402618314227042300, -11.01019593050192700, 9.174840664412130300 ) ) ; +#9237 = EDGE_LOOP ( 'NONE', ( #10919, #10934, #11108, #11253 ) ) ; +#9238 = CARTESIAN_POINT ( 'NONE', ( 44.46258633258555900, -10.92342462761465600, -13.38312121690949000 ) ) ; +#9239 = CARTESIAN_POINT ( 'NONE', ( 33.11202711286942000, -32.50601298519293200, 24.97936677395333400 ) ) ; +#9240 = CARTESIAN_POINT ( 'NONE', ( 38.85766321779427600, -29.97633654124882300, 23.42286262370394600 ) ) ; +#9241 = FACE_OUTER_BOUND ( 'NONE', #8414, .T. ) ; +#9242 = ORIENTED_EDGE ( 'NONE', *, *, #4411, .F. ) ; +#9243 = CARTESIAN_POINT ( 'NONE', ( 2.026946206884755700, -9.022190312894881700, 19.98310492239634000 ) ) ; +#9244 = AXIS2_PLACEMENT_3D ( 'NONE', #5727, #5698, #5682 ) ; +#9245 = CARTESIAN_POINT ( 'NONE', ( 35.82890120582733600, -30.92908500549023600, 25.74307172434308200 ) ) ; +#9246 = CARTESIAN_POINT ( 'NONE', ( 11.26204500550884400, -11.51345710884148600, -25.07204384381354200 ) ) ; +#9247 = CARTESIAN_POINT ( 'NONE', ( 41.05031229891977800, -17.89971763001110400, -11.54009635487823200 ) ) ; +#9248 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000032000, -27.07571732632182900, 6.665795566818257400 ) ) ; +#9249 = CARTESIAN_POINT ( 'NONE', ( 38.08505180168902600, -94.81572042520439000, 8.755760547895901500 ) ) ; +#9250 = ADVANCED_FACE ( 'NONE', ( #4446 ), #10502, .T. ) ; +#9251 = CARTESIAN_POINT ( 'NONE', ( 6.689904739226432400, -30.19276985397629800, 24.07260569121570600 ) ) ; +#9252 = CARTESIAN_POINT ( 'NONE', ( 7.763906971948478600, -35.53526422174474000, 14.09039230290892400 ) ) ; +#9253 = CARTESIAN_POINT ( 'NONE', ( 31.64507019343793100, -30.77117759598970900, 27.82266813459791200 ) ) ; +#9254 = CARTESIAN_POINT ( 'NONE', ( 1.128107026601320600E-010, -5.570160475086460400, 16.28393358180937500 ) ) ; +#9255 = CARTESIAN_POINT ( 'NONE', ( 11.74308244283152900, -30.38395533888875000, 27.26110565492128400 ) ) ; +#9256 = LINE ( 'NONE', #691, #8629 ) ; +#9257 = CARTESIAN_POINT ( 'NONE', ( 30.73556086059858900, -16.30599167469223700, 23.88808352762885400 ) ) ; +#9258 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #2124 ) ; +#9259 = CARTESIAN_POINT ( 'NONE', ( 1.400978208585105500, -8.473868145886756400, 18.79551790172617800 ) ) ; +#9260 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -12.49999999999999600, 22.05918254822886100 ) ) ; +#9261 = CARTESIAN_POINT ( 'NONE', ( 2.504369967205455800, -10.44154865655181100, -20.92187104639650700 ) ) ; +#9262 = CARTESIAN_POINT ( 'NONE', ( 4.820897775910889700, -11.96730932607078800, 19.57744122587401500 ) ) ; +#9263 = AXIS2_PLACEMENT_3D ( 'NONE', #9446, #8282, #8218 ) ; +#9264 = CARTESIAN_POINT ( 'NONE', ( 10.36687656244332900, -30.27212678992240000, 26.62737449284317400 ) ) ; +#9265 = CARTESIAN_POINT ( 'NONE', ( 31.30424908285672800, -12.50000000000001100, 20.32933992022144700 ) ) ; +#9266 = CARTESIAN_POINT ( 'NONE', ( 38.27799613693490200, -7.997359750739079200, -24.99999999999999300 ) ) ; +#9267 = CARTESIAN_POINT ( 'NONE', ( 40.36498121886636200, -11.86704017248713300, 19.40309482547938900 ) ) ; +#9268 = CARTESIAN_POINT ( 'NONE', ( 5.105146518543763900, -29.52635981388971900, 21.88296913613760400 ) ) ; +#9269 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -95.07596123493894400, 11.50239124669685100 ) ) ; +#9270 = CARTESIAN_POINT ( 'NONE', ( 37.03901729616973200, -31.00441409085269500, 24.61162716477576500 ) ) ; +#9271 = EDGE_LOOP ( 'NONE', ( #9803, #2319 ) ) ; +#9272 = CIRCLE ( 'NONE', #2268, 5.000000000000000000 ) ; +#9273 = CARTESIAN_POINT ( 'NONE', ( 33.74275062693529000, -30.24984791938133100, 27.04292658945965000 ) ) ; +#9274 = CARTESIAN_POINT ( 'NONE', ( 36.40923765609304000, -26.35321215671042300, 16.90988292043277900 ) ) ; +#9275 = CARTESIAN_POINT ( 'NONE', ( 8.699750131961502900, -29.69828190567792700, 25.49509949846454800 ) ) ; +#9276 = CARTESIAN_POINT ( 'NONE', ( 37.07052365884241900, -7.720669053429737100, -29.09507218946679800 ) ) ; +#9277 = CARTESIAN_POINT ( 'NONE', ( 2.290724941679630700E-013, -9.472609796321869200, 11.40323113329838000 ) ) ; +#9278 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000913800, -9.184424249653991600, -15.67209455524944200 ) ) ; +#9279 = CARTESIAN_POINT ( 'NONE', ( 26.35530783149328100, -31.25524091047433100, 28.72140076242224200 ) ) ; +#9280 = AXIS2_PLACEMENT_3D ( 'NONE', #8000, #7954, #7891 ) ; +#9281 = CARTESIAN_POINT ( 'NONE', ( 38.20835585949235000, -30.90618493268927100, 23.02723058388775700 ) ) ; +#9282 = CYLINDRICAL_SURFACE ( 'NONE', #2528, 2.500000000000000000 ) ; +#9283 = CARTESIAN_POINT ( 'NONE', ( 2.184080544194420000, -10.04764002968663700, 17.18083247444811000 ) ) ; +#9284 = CARTESIAN_POINT ( 'NONE', ( 35.70125094351898600, -29.85077355992128600, 25.93832698644018500 ) ) ; +#9285 = CARTESIAN_POINT ( 'NONE', ( 12.90136799010446100, -10.43079757070501200, -25.07596123493895100 ) ) ; +#9286 = DIRECTION ( 'NONE', ( 0.5341186287274891600, -0.7978554261829686700, -0.2795425000901660100 ) ) ; +#9287 = ORIENTED_EDGE ( 'NONE', *, *, #4840, .F. ) ; +#9288 = CARTESIAN_POINT ( 'NONE', ( 2.123306604388271300, 11.15206692787415900, -24.38346697805857500 ) ) ; +#9289 = CARTESIAN_POINT ( 'NONE', ( 34.56105687013566600, -19.27736095126316900, -24.23438058531180800 ) ) ; +#9290 = CARTESIAN_POINT ( 'NONE', ( 7.176812007520490000, -29.16355573065471800, 23.86569600928450900 ) ) ; +#9291 = CARTESIAN_POINT ( 'NONE', ( 5.735863370631427900, -30.26942355435934900, 20.62625925235912000 ) ) ; +#9292 = CARTESIAN_POINT ( 'NONE', ( 31.64507145573498900, -30.83919756180981500, 27.81067391466307400 ) ) ; +#9293 = CARTESIAN_POINT ( 'NONE', ( 35.85237767513808600, -9.452036835833551400, 25.00000000000000000 ) ) ; +#9294 = CARTESIAN_POINT ( 'NONE', ( 11.83087150772593100, -30.83092033915015800, 27.25275495216075700 ) ) ; +#9295 = LINE ( 'NONE', #12526, #11956 ) ; +#9296 = CARTESIAN_POINT ( 'NONE', ( 28.31859555516345100, -18.14733780923127100, 23.56340452328639400 ) ) ; +#9297 = CARTESIAN_POINT ( 'NONE', ( 38.93959295181579700, -28.87825036442068000, 21.82391255020289500 ) ) ; +#9298 = APPROVAL_ROLE ( '' ) ; +#9299 = CARTESIAN_POINT ( 'NONE', ( 6.339790940407623600, -28.96468636943532400, 22.58530847768214000 ) ) ; +#9300 = CARTESIAN_POINT ( 'NONE', ( 5.314915906037052600, -20.17016723208045900, -14.74581033592622800 ) ) ; +#9301 = CARTESIAN_POINT ( 'NONE', ( 44.47089510198853200, -11.05521899482062400, 8.234064636570215300 ) ) ; +#9302 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000001400, -99.99999999999998600, 16.64915202258766100 ) ) ; +#9303 = EDGE_CURVE ( 'NONE', #5692, #6456, #695, .T. ) ; +#9304 = CARTESIAN_POINT ( 'NONE', ( 14.96848886831334700, -31.29892962639993600, 28.17819754820189700 ) ) ; +#9305 = CARTESIAN_POINT ( 'NONE', ( 10.58514749217777900, -31.08081477710480200, 26.53739979121608900 ) ) ; +#9306 = CARTESIAN_POINT ( 'NONE', ( 25.83336499485023200, -100.0000000000000300, 6.630571736238747100 ) ) ; +#9307 = CARTESIAN_POINT ( 'NONE', ( 39.38742874220731200, -10.81130008833247800, -24.27791423091767300 ) ) ; +#9308 = CARTESIAN_POINT ( 'NONE', ( 38.67847393712371900, -10.20581393442286700, 22.69791016775963000 ) ) ; +#9309 = CARTESIAN_POINT ( 'NONE', ( 6.121381524094001500, -30.62166641436758500, 21.75485388116655000 ) ) ; +#9310 = FACE_OUTER_BOUND ( 'NONE', #8044, .T. ) ; +#9311 = CARTESIAN_POINT ( 'NONE', ( 36.78359653965553400, -29.76772999261413900, 25.21130309029837900 ) ) ; +#9312 = CARTESIAN_POINT ( 'NONE', ( 40.37392192486304100, -29.41526765223335700, 21.66148560243478700 ) ) ; +#9313 = ADVANCED_FACE ( 'NONE', ( #1767 ), #10451, .F. ) ; +#9314 = CARTESIAN_POINT ( 'NONE', ( 33.76839462033907300, -30.68270048038655800, 27.02375748815956100 ) ) ; +#9315 = CARTESIAN_POINT ( 'NONE', ( 39.88127607174516200, -28.38133339307856000, 15.78558801198493100 ) ) ; +#9316 = ORIENTED_EDGE ( 'NONE', *, *, #9991, .F. ) ; +#9317 = EDGE_LOOP ( 'NONE', ( #4079, #4182, #4346, #4387 ) ) ; +#9318 = CARTESIAN_POINT ( 'NONE', ( 8.733655388625429300, -30.91770049829850800, 25.41909676709130700 ) ) ; +#9319 = VECTOR ( 'NONE', #1621, 1000.000000000000000 ) ; +#9320 = CARTESIAN_POINT ( 'NONE', ( 4.864622471090076100, -95.07596123493894400, 8.991554784010963500 ) ) ; +#9321 = CARTESIAN_POINT ( 'NONE', ( 42.77294745371474200, -9.999999999999996400, -20.94917749288614000 ) ) ; +#9322 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, -6.860168661592653400, 13.68639754819188100 ) ) ; +#9323 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999999300, -5.972439772307620100, -18.28778649756458900 ) ) ; +#9324 = EDGE_CURVE ( 'NONE', #4514, #6316, #6870, .T. ) ; +#9325 = ADVANCED_FACE ( 'NONE', ( #12237 ), #12490, .F. ) ; +#9326 = CARTESIAN_POINT ( 'NONE', ( 38.48554889074539900, -29.72347609916954500, 23.77607342757908200 ) ) ; +#9327 = ORIENTED_EDGE ( 'NONE', *, *, #11912, .F. ) ; +#9328 = CARTESIAN_POINT ( 'NONE', ( 35.79530748175633900, -30.63039473094142600, 25.94366832492202200 ) ) ; +#9329 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#9330 = ORIENTED_EDGE ( 'NONE', *, *, #10247, .T. ) ; +#9331 = CARTESIAN_POINT ( 'NONE', ( 26.14562332770328000, -95.07596123493894400, 17.89374687364557900 ) ) ; +#9332 = CARTESIAN_POINT ( 'NONE', ( 6.844785177384136600, -30.49015008965768200, 24.05864815443426600 ) ) ; +#9333 = CARTESIAN_POINT ( 'NONE', ( 9.329702627660768900, -31.32021948652603200, 16.83663281739691400 ) ) ; +#9334 = CARTESIAN_POINT ( 'NONE', ( 31.44012256894739100, -30.78890647906754200, 27.88330109268780200 ) ) ; +#9335 = CARTESIAN_POINT ( 'NONE', ( 42.49563003279459400, -10.44154865655175600, -20.92187104639649000 ) ) ; +#9336 = CARTESIAN_POINT ( 'NONE', ( 11.83441454788697000, -30.51296718675769200, 27.30042990787719900 ) ) ; +#9337 = AXIS2_PLACEMENT_3D ( 'NONE', #8441, #8421, #8399 ) ; +#9338 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -12.49999999999998400, -22.94081745177112800 ) ) ; +#9339 = CARTESIAN_POINT ( 'NONE', ( 39.98434649167451500, -29.60559266216503400, 21.69637350702101100 ) ) ; +#9340 = ORIENTED_EDGE ( 'NONE', *, *, #9702, .T. ) ; +#9341 = VERTEX_POINT ( 'NONE', #12563 ) ; +#9342 = CARTESIAN_POINT ( 'NONE', ( 6.297176900598553400, -28.95445569246588500, 22.49814043101709200 ) ) ; +#9343 = CARTESIAN_POINT ( 'NONE', ( 4.232788107065723600, -17.93586104533719800, -14.92880818408015600 ) ) ; +#9344 = VERTEX_POINT ( 'NONE', #6488 ) ; +#9345 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#9346 = CARTESIAN_POINT ( 'NONE', ( 24.81280616483239900, -30.65917406624146600, 28.85723021296911000 ) ) ; +#9347 = CARTESIAN_POINT ( 'NONE', ( 10.54340409602586000, -30.52215937276260900, 26.71839569316341200 ) ) ; +#9348 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#9349 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -99.99999999999998600, -40.86942826376123600 ) ) ; +#9350 = CARTESIAN_POINT ( 'NONE', ( 39.38172116454283200, -9.963341907213852300, 26.73554102850499300 ) ) ; +#9351 = ORIENTED_EDGE ( 'NONE', *, *, #10378, .T. ) ; +#9352 = CARTESIAN_POINT ( 'NONE', ( 5.072543973052686900, -29.88011532680918600, 21.87451422716192400 ) ) ; +#9353 = CARTESIAN_POINT ( 'NONE', ( 8.360928362431042900, -36.13860968186870800, 14.78079515440530000 ) ) ; +#9354 = CARTESIAN_POINT ( 'NONE', ( 1.448115200919390500, 11.84765776320184600, -23.55188479908031600 ) ) ; +#9355 = CARTESIAN_POINT ( 'NONE', ( 36.85214812969130100, -30.70239784530335600, 25.12918870789735900 ) ) ; +#9356 = ORIENTED_EDGE ( 'NONE', *, *, #10929, .F. ) ; +#9357 = ORIENTED_EDGE ( 'NONE', *, *, #1816, .T. ) ; +#9358 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, 51.02052347080197600, -11.74043533514386100 ) ) ; +#9359 = CARTESIAN_POINT ( 'NONE', ( 28.52123652106371700, -19.15601382613209900, 22.96044097629665600 ) ) ; +#9360 = AXIS2_PLACEMENT_3D ( 'NONE', #993, #3009, #10134 ) ; +#9361 = CARTESIAN_POINT ( 'NONE', ( 33.74268203923944800, -31.06295107289318500, 26.89940596935680300 ) ) ; +#9362 = EDGE_LOOP ( 'NONE', ( #4525, #4552, #4685, #4710, #4856, #1543, #5040, #5200 ) ) ; +#9363 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000002100, -26.55300927420475800, 7.631692955917370300 ) ) ; +#9364 = CARTESIAN_POINT ( 'NONE', ( 6.259776781146555000, -28.94486096621879400, 22.41522794675869400 ) ) ; +#9365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9366 = CARTESIAN_POINT ( 'NONE', ( 12.13044251346036300, -30.77195137315355200, 27.39071922668124500 ) ) ; +#9367 = ORIENTED_EDGE ( 'NONE', *, *, #4497, .F. ) ; +#9368 = CARTESIAN_POINT ( 'NONE', ( 8.685341080378421500, -30.07983212891677000, 25.63363324831194500 ) ) ; +#9369 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -19.99999999999991500, -11.53187062879840500 ) ) ; +#9370 = CARTESIAN_POINT ( 'NONE', ( 1.301042606982605300E-015, -10.00002214682495900, -11.47197231448332700 ) ) ; +#9371 = CARTESIAN_POINT ( 'NONE', ( 29.54941352505462900, -30.77347774677275500, 28.36758194924234300 ) ) ; +#9372 = CARTESIAN_POINT ( 'NONE', ( 5.006738376603756500, -8.705045879474665700, -24.87584363228889500 ) ) ; +#9373 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #12767, #7801, #11805 ), + ( #4675, #10794, #3664 ), + ( #8860, #9868, #2734 ), + ( #1726, #6803, #7845 ), + ( #722, #5847, #11932 ), + ( #4813, #10921, #3784 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001306197956163430800, 0.002612395912326861600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9645529253283149400, 1.000000000000000000), + ( 1.000000000000000000, 0.9636340927446696000, 1.000000000000000000), + ( 1.000000000000000000, 0.9629368749063137400, 1.000000000000000000), + ( 1.000000000000000000, 0.9619004716399574000, 1.000000000000000000), + ( 1.000000000000000000, 0.9615607078463288500, 1.000000000000000000), + ( 1.000000000000000000, 0.9613603877058488600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#9374 = VERTEX_POINT ( 'NONE', #5495 ) ; +#9375 = CARTESIAN_POINT ( 'NONE', ( 38.19465991198266900, -30.80412594092322500, 23.41821183334393200 ) ) ; +#9376 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8896, #12041, #930, #8048, #1931, #9070, #2944, #10070 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 5.528191123575568100E-016, 0.0008307109937870213400, 0.001661421987573489700, 0.003322843975146426100 ), + .UNSPECIFIED. ) ; +#9377 = CARTESIAN_POINT ( 'NONE', ( 35.49064872285188700, -29.77077127730036600, 26.02766869313163100 ) ) ; +#9378 = CARTESIAN_POINT ( 'NONE', ( 10.61426105314817100, -97.47426379319895800, 20.41779993046648300 ) ) ; +#9379 = VERTEX_POINT ( 'NONE', #471 ) ; +#9380 = AXIS2_PLACEMENT_3D ( 'NONE', #8633, #8621, #8577 ) ; +#9381 = ORIENTED_EDGE ( 'NONE', *, *, #11676, .T. ) ; +#9382 = CARTESIAN_POINT ( 'NONE', ( 32.39134014114283400, -94.71799171677325500, 17.58980862092736400 ) ) ; +#9383 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9384 = CARTESIAN_POINT ( 'NONE', ( 28.11992271265796700, -31.98974796043852500, 20.80473854313845500 ) ) ; +#9385 = ADVANCED_FACE ( 'NONE', ( #11930 ), #4128, .T. ) ; +#9386 = ORIENTED_EDGE ( 'NONE', *, *, #7791, .T. ) ; +#9387 = CARTESIAN_POINT ( 'NONE', ( 7.088756096045354800, -29.38403370111099700, 24.04576189373552700 ) ) ; +#9388 = CARTESIAN_POINT ( 'NONE', ( 5.912113709087596400, -30.44840393649469200, 21.17219657682683100 ) ) ; +#9389 = CARTESIAN_POINT ( 'NONE', ( 31.43941831084447700, -30.82090366582636800, 27.87802751992675000 ) ) ; +#9390 = CARTESIAN_POINT ( 'NONE', ( 44.01147655313660300, -7.995754454212138800, -21.58611162205736600 ) ) ; +#9391 = CARTESIAN_POINT ( 'NONE', ( 12.13621309149394800, -30.94044776652067000, 27.34582554578097200 ) ) ; +#9392 = CARTESIAN_POINT ( 'NONE', ( 44.91128611977983800, -5.968876394299121200, -20.11104569731183000 ) ) ; +#9393 = CARTESIAN_POINT ( 'NONE', ( 38.97085850170842000, -30.55419442440221900, 21.52844374055902700 ) ) ; +#9394 = CARTESIAN_POINT ( 'NONE', ( 6.257304459535704100, -28.94422524793320800, 22.40972965558437800 ) ) ; +#9395 = CARTESIAN_POINT ( 'NONE', ( 5.485080767010111400, -22.77287321726813500, -15.90490701722260900 ) ) ; +#9396 = ADVANCED_FACE ( 'NONE', ( #1459 ), #11526, .T. ) ; +#9397 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9398 = CARTESIAN_POINT ( 'NONE', ( 6.712006322907203800, -7.463541018600208700, -24.99999999999999600 ) ) ; +#9399 = CARTESIAN_POINT ( 'NONE', ( 42.69653175939609500, -9.216949489639212300, 20.54033425886816400 ) ) ; +#9400 = VECTOR ( 'NONE', #1760, 1000.000000000000100 ) ; +#9401 = CARTESIAN_POINT ( 'NONE', ( 10.87436626786875800, -31.09490435274558700, 26.68568622630313000 ) ) ; +#9402 = ORIENTED_EDGE ( 'NONE', *, *, #12094, .T. ) ; +#9403 = CARTESIAN_POINT ( 'NONE', ( 0.08878162486774758600, -5.969253305774662600, -20.11133451938987100 ) ) ; +#9404 = CARTESIAN_POINT ( 'NONE', ( 6.256867239339293900, -97.42181713028699600, 18.37434326604851600 ) ) ; +#9405 = CARTESIAN_POINT ( 'NONE', ( 6.090150911730205500, -28.91649696254175300, 22.05483553644902600 ) ) ; +#9406 = CARTESIAN_POINT ( 'NONE', ( 9.657464228197778100, -31.32681011593718200, 17.15043672228465300 ) ) ; +#9407 = CARTESIAN_POINT ( 'NONE', ( 42.49999999999999300, 9.500000000000000000, 22.50000000000000700 ) ) ; +#9408 = CARTESIAN_POINT ( 'NONE', ( 36.50235321562538400, -29.52002520660853300, 25.25346065890387600 ) ) ; +#9409 = CARTESIAN_POINT ( 'NONE', ( 10.55037755008145700, -100.0000000000000100, 2.274277673961568900 ) ) ; +#9410 = CARTESIAN_POINT ( 'NONE', ( 32.91856542046819100, -19.26203432161533200, 21.08146368443542700 ) ) ; +#9411 = CARTESIAN_POINT ( 'NONE', ( 33.56920831274425900, -30.60491554073100700, 27.12480341910816500 ) ) ; +#9412 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -90.97466676719913900, -3.162219049256695500 ) ) ; +#9413 = CARTESIAN_POINT ( 'NONE', ( 6.253733625570443900, -28.94330330628314500, 22.40174405257097600 ) ) ; +#9414 = CYLINDRICAL_SURFACE ( 'NONE', #1627, 2.499999999999998700 ) ; +#9415 = CARTESIAN_POINT ( 'NONE', ( 0.9750255739051333400, 11.48776909978539300, -22.80499488521890700 ) ) ; +#9416 = EDGE_LOOP ( 'NONE', ( #754, #908, #1055, #1266 ) ) ; +#9417 = CARTESIAN_POINT ( 'NONE', ( 12.13750515832538700, -30.49306962233938000, 27.42133444196171200 ) ) ; +#9418 = CARTESIAN_POINT ( 'NONE', ( 8.990018017595042800, -31.15048942489239200, 25.39123983986302900 ) ) ; +#9419 = CARTESIAN_POINT ( 'NONE', ( 28.94050684943296000, -20.83986826239196700, -26.41362519053479500 ) ) ; +#9420 = CARTESIAN_POINT ( 'NONE', ( -2.602085213965210600E-015, -8.819792439390537800, -11.59673158216732200 ) ) ; +#9421 = CARTESIAN_POINT ( 'NONE', ( 37.43863981496947700, -8.698759339286581800, 25.00000000000000000 ) ) ; +#9422 = CARTESIAN_POINT ( 'NONE', ( 38.12480880095299800, -29.32293524985181300, 23.77749623068432800 ) ) ; +#9423 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7315, #3226, #11474, #5362, #12443, #6398, #353, #7450, #1341, #8483 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.006272434355767061100, 0.007840542944708818800, 0.009408651533650577400, 0.01254486871153407200 ), + .UNSPECIFIED. ) ; +#9424 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9425 = AXIS2_PLACEMENT_3D ( 'NONE', #9407, #9383, #9365 ) ; +#9426 = FACE_OUTER_BOUND ( 'NONE', #12605, .T. ) ; +#9427 = CARTESIAN_POINT ( 'NONE', ( 35.61688518506733900, -30.47213242151678600, 26.10048589569898800 ) ) ; +#9428 = CARTESIAN_POINT ( 'NONE', ( 34.17258956866192000, -95.07596123493894400, 14.88435550435845500 ) ) ; +#9429 = CARTESIAN_POINT ( 'NONE', ( 30.55371993616859400, -38.87386673016703800, 18.82874935303490800 ) ) ; +#9430 = CARTESIAN_POINT ( 'NONE', ( 7.179971499529761700, -30.86456210148607600, 23.89193512223285500 ) ) ; +#9431 = CARTESIAN_POINT ( 'NONE', ( 8.679888744972318500, -36.41337521272849600, 15.11734417444757400 ) ) ; +#9432 = CARTESIAN_POINT ( 'NONE', ( 31.33717133281730600, -30.80700065772969200, 27.91123031249372800 ) ) ; +#9433 = CARTESIAN_POINT ( 'NONE', ( 18.65788735627582900, -33.32023780227473300, 26.50878423109035600 ) ) ; +#9434 = CARTESIAN_POINT ( 'NONE', ( 38.98145473460195400, -12.41469296324549500, 20.68194503189016900 ) ) ; +#9435 = CARTESIAN_POINT ( 'NONE', ( 39.67076097445820400, -29.25859258247507100, 21.82070738241122100 ) ) ; +#9436 = CARTESIAN_POINT ( 'NONE', ( 6.248412175900692300, -28.94192490315994000, 22.38979086260747000 ) ) ; +#9437 = CARTESIAN_POINT ( 'NONE', ( 8.988701212932644700, -23.43108408893290200, -22.48385821377059900 ) ) ; +#9438 = ORIENTED_EDGE ( 'NONE', *, *, #6010, .T. ) ; +#9439 = DIRECTION ( 'NONE', ( -0.5697332752314378000, -0.06212487650149671500, -0.8194781844648048000 ) ) ; +#9440 = AXIS2_PLACEMENT_3D ( 'NONE', #11585, #11571, #11564 ) ; +#9441 = CARTESIAN_POINT ( 'NONE', ( 5.358001648764324700, -27.64929233276498300, 6.564658817722297500 ) ) ; +#9442 = CYLINDRICAL_SURFACE ( 'NONE', #3250, 14.99999999999999800 ) ; +#9443 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#9444 = CARTESIAN_POINT ( 'NONE', ( 5.443454830160514600, -30.27234758369427000, 21.96253780009606200 ) ) ; +#9445 = CARTESIAN_POINT ( 'NONE', ( 6.396254708294579300, -30.81666262191251000, 22.21904940089306300 ) ) ; +#9446 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -27.23413567771367000, 29.46115689082877500 ) ) ; +#9447 = CARTESIAN_POINT ( 'NONE', ( 36.71791217875992400, -30.44940104621397100, 25.36323534631662500 ) ) ; +#9448 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.734723475976808100E-016, 1.000000000000000000 ) ) ; +#9449 = CARTESIAN_POINT ( 'NONE', ( 35.68980371135413800, -19.39091885971464500, 18.79784272548579700 ) ) ; +#9450 = ADVANCED_FACE ( 'NONE', ( #6545 ), #7661, .F. ) ; +#9451 = CARTESIAN_POINT ( 'NONE', ( 33.55495644504159700, -30.98853694873706000, 27.02464377125623300 ) ) ; +#9452 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -96.75657634286285700, 6.749301598762036400 ) ) ; +#9453 = CARTESIAN_POINT ( 'NONE', ( 6.236238579771114800, -28.93873984666147700, 22.36207715038931800 ) ) ; +#9454 = FACE_OUTER_BOUND ( 'NONE', #3548, .T. ) ; +#9455 = CARTESIAN_POINT ( 'NONE', ( 37.78860080474103700, -95.01597796246963400, 10.11858592181174300 ) ) ; +#9456 = CARTESIAN_POINT ( 'NONE', ( 12.33466916746783000, -30.86646618114452100, 27.44698002059517300 ) ) ; +#9457 = CARTESIAN_POINT ( 'NONE', ( 8.833055848411552400, -30.37280117855502900, 25.75399052663592100 ) ) ; +#9458 = EDGE_CURVE ( 'NONE', #6802, #8244, #9172, .T. ) ; +#9459 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -5.000000000000000900, 0.0000000000000000000 ) ) ; +#9460 = CARTESIAN_POINT ( 'NONE', ( 1.654918043637500900E-013, -9.989433520570431200, -12.00898788826609100 ) ) ; +#9461 = CARTESIAN_POINT ( 'NONE', ( 34.83662596889206500, -11.28287494088396800, 25.00000000000000000 ) ) ; +#9462 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 12.00000000000000000, -22.50000000000000000 ) ) ; +#9463 = AXIS2_PLACEMENT_3D ( 'NONE', #11745, #11734, #11706 ) ; +#9464 = ADVANCED_FACE ( 'NONE', ( #1148 ), #1551, .F. ) ; +#9465 = CARTESIAN_POINT ( 'NONE', ( 38.40108922763496900, -30.45273520619162600, 23.75879772218488000 ) ) ; +#9466 = CARTESIAN_POINT ( 'NONE', ( 10.97330804032078400, -16.84831001779370800, -24.88523528509238100 ) ) ; +#9467 = FACE_OUTER_BOUND ( 'NONE', #136, .T. ) ; +#9468 = CARTESIAN_POINT ( 'NONE', ( 35.49098766691546600, -31.16431634989631400, 25.78248417683479900 ) ) ; +#9469 = CARTESIAN_POINT ( 'NONE', ( 6.050532966968412500, -30.55079519729965300, 21.46087037243998800 ) ) ; +#9470 = CARTESIAN_POINT ( 'NONE', ( 2.169586614425179400, 11.38346697805856100, -24.15206692787417700 ) ) ; +#9471 = CARTESIAN_POINT ( 'NONE', ( 36.11905160417335700, -31.90308803100105800, 24.97660230408912000 ) ) ; +#9472 = CARTESIAN_POINT ( 'NONE', ( 6.942707166987984700, -29.83783362094569800, 24.28139958174881800 ) ) ; +#9473 = CARTESIAN_POINT ( 'NONE', ( 39.99493099933476300, -22.32621051145457300, -11.54599890289730800 ) ) ; +#9474 = CARTESIAN_POINT ( 'NONE', ( 31.33674303016260900, -30.82029693841101200, 27.90901057148455800 ) ) ; +#9475 = CARTESIAN_POINT ( 'NONE', ( 12.71824859051905700, -30.67905072741608300, 27.64106482197785700 ) ) ; +#9476 = CARTESIAN_POINT ( 'NONE', ( 39.36360776232094600, -30.39025028993415100, 21.62052497651756500 ) ) ; +#9477 = VECTOR ( 'NONE', #11717, 1000.000000000000000 ) ; +#9478 = CARTESIAN_POINT ( 'NONE', ( 6.226219171816995700, -28.93606211929569100, 22.33862799612144600 ) ) ; +#9479 = CARTESIAN_POINT ( 'NONE', ( 9.226007851374632200, -20.59703336276967500, -22.24440088381502900 ) ) ; +#9480 = CARTESIAN_POINT ( 'NONE', ( 12.90136799010446500, -9.562556682370397400, -30.00000000000000000 ) ) ; +#9481 = CARTESIAN_POINT ( 'NONE', ( 17.59082827959734600, -97.51410528544276700, 21.98900951091847500 ) ) ; +#9482 = EDGE_CURVE ( 'NONE', #783, #12584, #6796, .T. ) ; +#9483 = CARTESIAN_POINT ( 'NONE', ( 8.144131370910599800, -100.0000000000000100, -29.69330526753332900 ) ) ; +#9484 = PLANE ( 'NONE', #3799 ) ; +#9485 = CARTESIAN_POINT ( 'NONE', ( 0.7526591093575001300, -7.652082656576102000, 17.96289895149803300 ) ) ; +#9486 = CARTESIAN_POINT ( 'NONE', ( 10.76370865896492600, -12.34547275412262100, 24.58643444490503400 ) ) ; +#9487 = ORIENTED_EDGE ( 'NONE', *, *, #12356, .F. ) ; +#9488 = CARTESIAN_POINT ( 'NONE', ( 5.745785416737902600, -29.11656525742921500, 22.17118346971695100 ) ) ; +#9489 = CARTESIAN_POINT ( 'NONE', ( 10.67454721578052300, -31.36362213525311300, 18.01299502310185100 ) ) ; +#9490 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #11597, #8246, ( #167 ) ) ; +#9491 = CARTESIAN_POINT ( 'NONE', ( 36.49233933765825100, -31.15490491191055600, 24.95221164574696700 ) ) ; +#9492 = FACE_OUTER_BOUND ( 'NONE', #2799, .T. ) ; +#9493 = CARTESIAN_POINT ( 'NONE', ( 37.69407466817414600, -19.53737055139395200, 16.20297989722066800 ) ) ; +#9494 = CARTESIAN_POINT ( 'NONE', ( 33.46260556515717600, -30.45581196594561700, 27.17795914394695300 ) ) ; +#9495 = CARTESIAN_POINT ( 'NONE', ( 6.206729398116498200, -28.93077323277508800, 22.29214194598521100 ) ) ; +#9496 = CARTESIAN_POINT ( 'NONE', ( 37.64216832670513200, -95.07596123493895800, 10.80590508713790000 ) ) ; +#9497 = CARTESIAN_POINT ( 'NONE', ( 12.33466645610048000, -30.62116533567788700, 27.49023245842886000 ) ) ; +#9498 = VERTEX_POINT ( 'NONE', #634 ) ; +#9499 = AXIS2_PLACEMENT_3D ( 'NONE', #12247, #12200, #12157 ) ; +#9500 = CARTESIAN_POINT ( 'NONE', ( 8.997772316358682700, -29.62892760287747200, 25.64836696722799300 ) ) ; +#9501 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#9502 = CARTESIAN_POINT ( 'NONE', ( 21.70107738884439300, -25.49316313804114400, 22.26813732225904000 ) ) ; +#9503 = EDGE_CURVE ( 'NONE', #6456, #9213, #8946, .T. ) ; +#9504 = ORIENTED_EDGE ( 'NONE', *, *, #11873, .T. ) ; +#9505 = CARTESIAN_POINT ( 'NONE', ( 37.82293087933517500, -29.16349702783916700, 23.86590013503449400 ) ) ; +#9506 = CARTESIAN_POINT ( 'NONE', ( 35.50728355366180000, -30.28516407459048300, 26.16624784976452400 ) ) ; +#9507 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5156, #5326, #5074, #5062 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.002971249379998433800, 0.009781861471846446700 ), + .UNSPECIFIED. ) ; +#9508 = CARTESIAN_POINT ( 'NONE', ( 30.49894228717506200, -95.07596123493897300, 16.22268093441929800 ) ) ; +#9509 = EDGE_LOOP ( 'NONE', ( #12616, #12766, #12904, #12925 ) ) ; +#9510 = VERTEX_POINT ( 'NONE', #8776 ) ; +#9511 = CARTESIAN_POINT ( 'NONE', ( 7.500000007721790300, -95.07596123493894400, 12.92967538968956700 ) ) ; +#9512 = CARTESIAN_POINT ( 'NONE', ( 34.66961923495183100, -31.34811569513265200, 17.73981487544039800 ) ) ; +#9513 = ADVANCED_FACE ( 'NONE', ( #3499 ), #4403, .F. ) ; +#9514 = CARTESIAN_POINT ( 'NONE', ( 7.348118588510068600, -31.02836944096710100, 23.75123457420962900 ) ) ; +#9515 = VERTEX_POINT ( 'NONE', #1597 ) ; +#9516 = CARTESIAN_POINT ( 'NONE', ( 39.99407820394429800, -19.97928246381173500, -10.99229046272895100 ) ) ; +#9517 = CARTESIAN_POINT ( 'NONE', ( 31.33715117174121900, -30.83545212563341700, 27.90621942339247100 ) ) ; +#9518 = CARTESIAN_POINT ( 'NONE', ( 7.031044492923272500, -31.25564718341016100, 24.61397145519906700 ) ) ; +#9519 = AXIS2_PLACEMENT_3D ( 'NONE', #12814, #12772, #12747 ) ; +#9520 = CARTESIAN_POINT ( 'NONE', ( 39.08965584822244900, -28.97657540633666400, 21.98654229992057200 ) ) ; +#9521 = ORIENTED_EDGE ( 'NONE', *, *, #479, .F. ) ; +#9522 = ORIENTED_EDGE ( 'NONE', *, *, #11193, .F. ) ; +#9523 = CARTESIAN_POINT ( 'NONE', ( 1.711416090718459200, -8.768782475302526100, 19.36302469731089100 ) ) ; +#9524 = CARTESIAN_POINT ( 'NONE', ( 8.321535727570452700, -18.01220967206105400, -23.04851942595399800 ) ) ; +#9525 = ORIENTED_EDGE ( 'NONE', *, *, #8201, .F. ) ; +#9526 = ADVANCED_FACE ( 'NONE', ( #11318 ), #2064, .F. ) ; +#9527 = CARTESIAN_POINT ( 'NONE', ( 20.08474748030704400, -33.18150031829111400, 28.41247604058418800 ) ) ; +#9528 = CARTESIAN_POINT ( 'NONE', ( 11.76159460261535200, -94.73578216445835700, 17.24533615098952300 ) ) ; +#9529 = CARTESIAN_POINT ( 'NONE', ( 25.56766498511262500, -22.77578848424520800, -27.25271620959684800 ) ) ; +#9530 = CARTESIAN_POINT ( 'NONE', ( 13.31939793247520300, -15.37130714978024500, 24.05289362782149700 ) ) ; +#9531 = CARTESIAN_POINT ( 'NONE', ( 6.031324664292613500, -30.60247172034923600, 22.02510076837342700 ) ) ; +#9532 = CARTESIAN_POINT ( 'NONE', ( 9.719545823680347100, -37.14213175123492800, 16.08620130054040900 ) ) ; +#9533 = CARTESIAN_POINT ( 'NONE', ( 36.43508148018006000, -30.26634328389874200, 25.57768752051558500 ) ) ; +#9534 = ORIENTED_EDGE ( 'NONE', *, *, #3392, .F. ) ; +#9535 = ORIENTED_EDGE ( 'NONE', *, *, #1816, .F. ) ; +#9536 = CARTESIAN_POINT ( 'NONE', ( 39.06349787041813900, -19.69797910010996800, 13.35746952660970500 ) ) ; +#9537 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1312, #1441, #1175, #1154 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009242000805811960300, 0.004374429879120450900 ), + .UNSPECIFIED. ) ; +#9538 = ORIENTED_EDGE ( 'NONE', *, *, #8491, .F. ) ; +#9539 = CARTESIAN_POINT ( 'NONE', ( 33.46761025134600900, -30.83061652700429900, 27.12335567314483200 ) ) ; +#9540 = CARTESIAN_POINT ( 'NONE', ( 44.81770044892130000, -10.36459785928159700, -11.53161071885242000 ) ) ; +#9541 = CARTESIAN_POINT ( 'NONE', ( 1.606779483068411700, -8.675156088326113800, 19.16447855363794500 ) ) ; +#9542 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 7.000000000000000900, 18.70000000000001400 ) ) ; +#9543 = CARTESIAN_POINT ( 'NONE', ( 12.74067790905126800, -30.91156775435566900, 27.58658807934612900 ) ) ; +#9544 = CARTESIAN_POINT ( 'NONE', ( 8.927759411812163000, -30.57795191414596300, 25.77363216682323000 ) ) ; +#9545 = CARTESIAN_POINT ( 'NONE', ( 4.138360505872719300, -7.346822827177223100, 25.00000000000000000 ) ) ; +#9546 = CARTESIAN_POINT ( 'NONE', ( 30.50353260894888100, -30.80109823640784600, 28.16369087974056400 ) ) ; +#9547 = CARTESIAN_POINT ( 'NONE', ( 34.34449178742075800, -12.11888962775733700, 24.62638258948308600 ) ) ; +#9548 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11302, #11230, #11129, #11081, #11033, #11019 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 3.878959614448864200E-018, 0.001461751616650867800, 0.002923503233301731700 ), + .UNSPECIFIED. ) ; +#9549 = ORIENTED_EDGE ( 'NONE', *, *, #7266, .F. ) ; +#9550 = CARTESIAN_POINT ( 'NONE', ( 38.30987377181053000, -30.19280446981263600, 24.07291233586761300 ) ) ; +#9551 = ORIENTED_EDGE ( 'NONE', *, *, #8824, .T. ) ; +#9552 = CIRCLE ( 'NONE', #9060, 1.200000000000012600 ) ; +#9553 = CARTESIAN_POINT ( 'NONE', ( 35.44697022306357300, -31.01621563930603300, 25.94195820587877300 ) ) ; +#9554 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9555 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#9556 = ORIENTED_EDGE ( 'NONE', *, *, #10890, .T. ) ; +#9557 = CARTESIAN_POINT ( 'NONE', ( 37.51553127427505500, -35.20455389412714500, 13.73440247329343400 ) ) ; +#9558 = CARTESIAN_POINT ( 'NONE', ( 6.893030198561072900, -30.14047296640256600, 24.31013124030081900 ) ) ; +#9559 = CARTESIAN_POINT ( 'NONE', ( 40.64779724948606100, -18.50851523784259100, -7.338453701681443100 ) ) ; +#9560 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983000, 27.93782961424065500 ) ) ; +#9561 = EDGE_CURVE ( 'NONE', #2287, #6650, #3802, .T. ) ; +#9562 = FACE_OUTER_BOUND ( 'NONE', #7337, .T. ) ; +#9563 = CARTESIAN_POINT ( 'NONE', ( 39.85881938527534600, -30.02612565889901200, 21.79520193464454200 ) ) ; +#9564 = VERTEX_POINT ( 'NONE', #6928 ) ; +#9565 = AXIS2_PLACEMENT_3D ( 'NONE', #6345, #294, #7401 ) ; +#9566 = CARTESIAN_POINT ( 'NONE', ( 1.814708830214078800, -8.905007241122186600, 17.79455890962391600 ) ) ; +#9567 = CARTESIAN_POINT ( 'NONE', ( 9.185218841796814400, -23.45232246886914500, -22.69917681940607700 ) ) ; +#9568 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 9.500000000000000000, -19.48143887112369700 ) ) ; +#9569 = CARTESIAN_POINT ( 'NONE', ( 8.100092860052347600, -93.12913979837627200, 20.11540945928494400 ) ) ; +#9570 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9571 = CARTESIAN_POINT ( 'NONE', ( 15.42037541485155000, -17.29414957073768700, 23.71384462935593300 ) ) ; +#9572 = CIRCLE ( 'NONE', #12479, 3.189999999999994200 ) ; +#9573 = CARTESIAN_POINT ( 'NONE', ( 5.291054009865363600, -29.52889980674252300, 22.20141923425337500 ) ) ; +#9574 = CARTESIAN_POINT ( 'NONE', ( 7.456266962179316900, -31.37695392414169900, 23.67498231718435500 ) ) ; +#9575 = CARTESIAN_POINT ( 'NONE', ( 0.6165330219413131000, 11.15206692787404900, -22.87669339561167400 ) ) ; +#9576 = CARTESIAN_POINT ( 'NONE', ( 39.81327642960793900, -19.86325614927680800, 10.42849439874571800 ) ) ; +#9577 = ADVANCED_FACE ( 'NONE', ( #9584 ), #7850, .T. ) ; +#9578 = EDGE_CURVE ( 'NONE', #7655, #3874, #12821, .T. ) ; +#9579 = CARTESIAN_POINT ( 'NONE', ( 33.25693751298701500, -30.38395779110084400, 27.26113481700858500 ) ) ; +#9580 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #5259, #11380, #249, #7355 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.5000000620918260100, 1.000000000000000000 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9899187046567945500, 0.9899187046567945500, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#9581 = CARTESIAN_POINT ( 'NONE', ( 1.632010600054389500, -9.434444571595770800, 16.76486030204439000 ) ) ; +#9582 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.57596123493894400, 11.50239124669685300 ) ) ; +#9583 = CARTESIAN_POINT ( 'NONE', ( 12.73990921967834400, -30.74545274235688600, 27.62248617729701600 ) ) ; +#9584 = FACE_OUTER_BOUND ( 'NONE', #7088, .T. ) ; +#9585 = CARTESIAN_POINT ( 'NONE', ( 9.061315096726245200, -29.71126708003770000, 25.73151773300912700 ) ) ; +#9586 = CARTESIAN_POINT ( 'NONE', ( 34.73942355647749700, -12.19623197613948700, 24.38134862614391800 ) ) ; +#9587 = CARTESIAN_POINT ( 'NONE', ( 35.67937660019158800, -29.11714866038371200, 26.41404354038220600 ) ) ; +#9588 = CARTESIAN_POINT ( 'NONE', ( 35.40351271196941200, -10.28158667746681100, 24.95034867135455800 ) ) ; +#9589 = ADVANCED_FACE ( 'NONE', ( #3189 ), #10547, .F. ) ; +#9590 = ORIENTED_EDGE ( 'NONE', *, *, #2805, .T. ) ; +#9591 = CARTESIAN_POINT ( 'NONE', ( 37.82182514589577200, -30.99761712739457700, 23.54163854325172500 ) ) ; +#9592 = FACE_OUTER_BOUND ( 'NONE', #11016, .T. ) ; +#9593 = CARTESIAN_POINT ( 'NONE', ( 35.17483339376555300, -30.02795737218772500, 26.29800596935685100 ) ) ; +#9594 = CARTESIAN_POINT ( 'NONE', ( 44.92963435294246500, -6.209594593211870800, 16.16436675382494000 ) ) ; +#9595 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9596 = CARTESIAN_POINT ( 'NONE', ( 39.93062310571476600, -28.58846050321139700, 13.95428480444369000 ) ) ; +#9597 = CARTESIAN_POINT ( 'NONE', ( 7.349152332975847900, -29.20366235414804400, 24.07206905639498700 ) ) ; +#9598 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -3.469446951953616200E-016 ) ) ; +#9599 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983000, 27.93782961424065500 ) ) ; +#9600 = CARTESIAN_POINT ( 'NONE', ( 24.98060092683108700, -33.18018381368846500, 28.41270817586545400 ) ) ; +#9601 = FACE_OUTER_BOUND ( 'NONE', #4744, .T. ) ; +#9602 = CARTESIAN_POINT ( 'NONE', ( 38.88010964213898300, -28.90516186809058800, 22.05818541637813000 ) ) ; +#9603 = CARTESIAN_POINT ( 'NONE', ( 6.194472644574994500, -28.92733569153606500, 22.26170678746139900 ) ) ; +#9604 = CARTESIAN_POINT ( 'NONE', ( 9.423915333264229600, -20.60889485561853700, -22.44973923084661400 ) ) ; +#9605 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #12460, #6370, #372 ), + ( #7473, #1362, #8499 ), + ( #2360, #9502, #3378 ), + ( #10517, #4386, #11533 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.01254176244748114600, 0.01753276859679532600 ), + ( 0.1698242776351437400, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 0.9189223066719655100, 0.7612894503157420200, 1.000000000000000000), + ( 0.9189223066719655100, 0.7612894503157420200, 1.000000000000000000), + ( 0.9189223066719655100, 0.7612894503157419100, 1.000000000000000000), + ( 0.9189223066719655100, 0.7612894503157419100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#9606 = CARTESIAN_POINT ( 'NONE', ( 7.500000007721790300, -95.07596123493894400, 12.92967538968956700 ) ) ; +#9607 = CARTESIAN_POINT ( 'NONE', ( 6.256867239339278800, -97.42181713028701000, 18.37434326604850900 ) ) ; +#9608 = CARTESIAN_POINT ( 'NONE', ( 39.78008100422182000, -29.31186519935138100, 21.67971748126841200 ) ) ; +#9609 = AXIS2_PLACEMENT_3D ( 'NONE', #11304, #5183, #12282 ) ; +#9610 = CARTESIAN_POINT ( 'NONE', ( 36.71848227259795300, -12.50000000000000000, -14.65975260149480000 ) ) ; +#9611 = DIRECTION ( 'NONE', ( -0.8944271909999153000, 0.4472135954999593200, 0.0000000000000000000 ) ) ; +#9612 = CARTESIAN_POINT ( 'NONE', ( 18.20927763913027100, -18.84079450774941100, 23.44112939738462800 ) ) ; +#9613 = CARTESIAN_POINT ( 'NONE', ( 6.352059998399529000, -30.75342469640217000, 22.30817823844348900 ) ) ; +#9614 = CIRCLE ( 'NONE', #7304, 2.500000000000005300 ) ; +#9615 = CARTESIAN_POINT ( 'NONE', ( 11.39650740801389100, -31.41785052284816300, 18.53401340405930500 ) ) ; +#9616 = CARTESIAN_POINT ( 'NONE', ( 10.83711593456324700, -30.67337148056039100, 26.83829738946600700 ) ) ; +#9617 = CARTESIAN_POINT ( 'NONE', ( 15.13867752779218100, -89.25259502760197000, 10.23840046695651700 ) ) ; +#9618 = CARTESIAN_POINT ( 'NONE', ( 33.27159813534524300, -30.72943338725960800, 27.23444226062616000 ) ) ; +#9619 = CARTESIAN_POINT ( 'NONE', ( 39.93209850538585900, -28.82237576669230000, 8.128999411479954400 ) ) ; +#9620 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4831, #4895, #5507, #4804, #4789, #4745, #4717, #4700, #4667, #4622, #4608, #4594, #4579, #4563, #4535, #4517 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0006360404152698456800, 0.001272080830539691400, 0.001908121245809536800, 0.002544161661079382700, 0.003180202076349228600, 0.003816242491619073600, 0.005088323322158762000 ), + .UNSPECIFIED. ) ; +#9621 = CARTESIAN_POINT ( 'NONE', ( 6.159856579896365100, -28.91726477989128700, 22.17208234819025500 ) ) ; +#9622 = CARTESIAN_POINT ( 'NONE', ( 0.8479330721259389400, 11.38346697805867600, -22.83041338557487500 ) ) ; +#9623 = CARTESIAN_POINT ( 'NONE', ( 12.94427334411280300, -30.90293848535164400, 27.66098116386740100 ) ) ; +#9624 = CARTESIAN_POINT ( 'NONE', ( 9.156556062117342500, -30.87410062529600600, 25.77405035860056500 ) ) ; +#9625 = FACE_OUTER_BOUND ( 'NONE', #8589, .T. ) ; +#9626 = CARTESIAN_POINT ( 'NONE', ( 34.76895093769810100, -20.05707465487555700, -23.90720377890066900 ) ) ; +#9627 = CARTESIAN_POINT ( 'NONE', ( 37.59931401287414600, -28.61651756938740100, 22.99860430057439600 ) ) ; +#9628 = CARTESIAN_POINT ( 'NONE', ( 38.19449042564367100, -29.94048152041293800, 24.18974533059939300 ) ) ; +#9629 = VERTEX_POINT ( 'NONE', #10346 ) ; +#9630 = CARTESIAN_POINT ( 'NONE', ( 35.22435934396608600, -30.74442794688442900, 26.25423471353323600 ) ) ; +#9631 = ORIENTED_EDGE ( 'NONE', *, *, #11336, .F. ) ; +#9632 = CIRCLE ( 'NONE', #6641, 2.000000000000001800 ) ; +#9633 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9634 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -31.29513776008465000, 28.74509265499354200 ) ) ; +#9635 = CARTESIAN_POINT ( 'NONE', ( 39.87576543232254500, -28.30733713579984800, 8.832979447465708800 ) ) ; +#9636 = ADVANCED_FACE ( 'NONE', ( #829 ), #8200, .F. ) ; +#9637 = CARTESIAN_POINT ( 'NONE', ( 7.082444693890223200, -30.42139312669317500, 24.40074750620710700 ) ) ; +#9638 = CARTESIAN_POINT ( 'NONE', ( 38.75566910756978700, -97.04531648070948800, 18.39963808766759000 ) ) ; +#9639 = CARTESIAN_POINT ( 'NONE', ( 7.974808194961121400, -94.72210163403330800, 15.44587895066553800 ) ) ; +#9640 = CARTESIAN_POINT ( 'NONE', ( 39.94342195056189100, -29.70125492443078800, 21.90631719298723100 ) ) ; +#9641 = ORIENTED_EDGE ( 'NONE', *, *, #11530, .T. ) ; +#9642 = CARTESIAN_POINT ( 'NONE', ( 6.139658607517790600, -28.91087226255147500, 22.11458360460453300 ) ) ; +#9643 = CARTESIAN_POINT ( 'NONE', ( 8.532870432102402700, -18.01411974881032300, -23.27311840587065800 ) ) ; +#9644 = ADVANCED_FACE ( 'NONE', ( #526 ), #10671, .T. ) ; +#9645 = VERTEX_POINT ( 'NONE', #10684 ) ; +#9646 = CARTESIAN_POINT ( 'NONE', ( 12.38388232825554200, -95.07596123493894400, 15.53820665460283500 ) ) ; +#9647 = CARTESIAN_POINT ( 'NONE', ( 1.996461484477026800, -8.995288343174797400, -23.15379928292282600 ) ) ; +#9648 = CARTESIAN_POINT ( 'NONE', ( 39.34821652203639500, -30.17368738019600700, 20.32174790664629800 ) ) ; +#9649 = EDGE_CURVE ( 'NONE', #9344, #10763, #211, .T. ) ; +#9650 = CARTESIAN_POINT ( 'NONE', ( 29.07593264121952400, -12.49999999999999600, -22.27380022141383300 ) ) ; +#9651 = CARTESIAN_POINT ( 'NONE', ( 32.97922135165139700, -19.14944571762392700, -24.86451515001925100 ) ) ; +#9652 = CARTESIAN_POINT ( 'NONE', ( 19.02031634403653400, -19.13317153704322100, 23.36522559115077500 ) ) ; +#9653 = CARTESIAN_POINT ( 'NONE', ( 5.402055004865959000, -29.92158591019691000, 22.45504907787762900 ) ) ; +#9654 = CARTESIAN_POINT ( 'NONE', ( 10.48230208677485500, -37.55838243924566900, 16.69312461150881400 ) ) ; +#9655 = VERTEX_POINT ( 'NONE', #5606 ) ; +#9656 = CARTESIAN_POINT ( 'NONE', ( 10.87256782890906600, -30.15919864682917500, 26.85446282342896000 ) ) ; +#9657 = ORIENTED_EDGE ( 'NONE', *, *, #11916, .T. ) ; +#9658 = CARTESIAN_POINT ( 'NONE', ( 39.90105089062269900, -19.89919548076899900, 9.791522318730026000 ) ) ; +#9659 = CARTESIAN_POINT ( 'NONE', ( 38.29380799812639700, -28.72273015671921900, 22.40515160545363200 ) ) ; +#9660 = CARTESIAN_POINT ( 'NONE', ( 33.25617147317780100, -31.01955394803021100, 27.14727994777431500 ) ) ; +#9661 = ORIENTED_EDGE ( 'NONE', *, *, #11730, .F. ) ; +#9662 = CARTESIAN_POINT ( 'NONE', ( 36.03392442414321600, -36.63816599538938600, 15.40226373049533300 ) ) ; +#9663 = CARTESIAN_POINT ( 'NONE', ( 1.656862639325706400, -8.761746186257845200, 17.64976779035566800 ) ) ; +#9664 = CARTESIAN_POINT ( 'NONE', ( 18.93441120390394200, -31.27268910019675400, 28.74904970934652900 ) ) ; +#9665 = CARTESIAN_POINT ( 'NONE', ( 12.94477933992498300, -30.79224496618801900, 27.68545617287021400 ) ) ; +#9666 = ORIENTED_EDGE ( 'NONE', *, *, #1783, .T. ) ; +#9667 = CARTESIAN_POINT ( 'NONE', ( 9.156552449075956400, -30.04184841240873600, 25.92081181953354000 ) ) ; +#9668 = CARTESIAN_POINT ( 'NONE', ( 0.02832571919072532700, 9.894175532731914300, -18.88869844314349300 ) ) ; +#9669 = CARTESIAN_POINT ( 'NONE', ( 20.00727469121789800, -27.99000927115240600, 27.51040716200953200 ) ) ; +#9670 = CARTESIAN_POINT ( 'NONE', ( 3.549128351858390500, -10.05888375028515600, -22.99739662202806300 ) ) ; +#9671 = ORIENTED_EDGE ( 'NONE', *, *, #10793, .T. ) ; +#9672 = CARTESIAN_POINT ( 'NONE', ( 37.86772070890947400, -30.89879728877946300, 23.74208700555514200 ) ) ; +#9673 = MANIFOLD_SOLID_BREP ( 'Fillet29', #8885 ) ; +#9674 = CARTESIAN_POINT ( 'NONE', ( 0.5463293662201315100, -10.84391249108640000, -13.85566159628794700 ) ) ; +#9675 = CARTESIAN_POINT ( 'NONE', ( 34.95978385760923900, -29.91900200027475200, 26.38048804153292100 ) ) ; +#9676 = CARTESIAN_POINT ( 'NONE', ( 34.75295872015209400, -13.95556162302241200, -24.99999999999980500 ) ) ; +#9677 = VERTEX_POINT ( 'NONE', #574 ) ; +#9678 = CARTESIAN_POINT ( 'NONE', ( 24.93866206969478600, -30.66176281334873400, 28.85677374700786400 ) ) ; +#9679 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000900, 20.69000000000000100 ) ) ; +#9680 = ORIENTED_EDGE ( 'NONE', *, *, #11621, .T. ) ; +#9681 = CARTESIAN_POINT ( 'NONE', ( 7.383001832059865600, -29.38657374045982400, 24.30412273240060400 ) ) ; +#9682 = CARTESIAN_POINT ( 'NONE', ( 14.34238396928598100, -28.91241607560683500, 28.45846857203381900 ) ) ; +#9683 = CARTESIAN_POINT ( 'NONE', ( 36.65617149004590700, -18.01237507300756800, -23.06837513076633100 ) ) ; +#9684 = CARTESIAN_POINT ( 'NONE', ( 7.831009765041760500, -94.93186973515837200, 14.63877647822041600 ) ) ; +#9685 = CARTESIAN_POINT ( 'NONE', ( 38.88192721299665100, -30.62042104573991700, 21.75534698343287600 ) ) ; +#9686 = CARTESIAN_POINT ( 'NONE', ( 6.087427013580755100, -28.89245648741691900, 21.94911016415312200 ) ) ; +#9687 = CARTESIAN_POINT ( 'NONE', ( 9.789416908949837300, -23.51383168615115300, -23.32432646558564200 ) ) ; +#9688 = VERTEX_POINT ( 'NONE', #7689 ) ; +#9689 = LOCAL_TIME ( 17, 45, 49.00000000000000000, #12344 ) ; +#9690 = CARTESIAN_POINT ( 'NONE', ( 5.088774780589608900, -91.17400739771179000, -1.749716076300002400 ) ) ; +#9691 = CARTESIAN_POINT ( 'NONE', ( 39.58866730619051600, -29.82501499981768600, 19.12850485790659900 ) ) ; +#9692 = VERTEX_POINT ( 'NONE', #8717 ) ; +#9693 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9694 = CARTESIAN_POINT ( 'NONE', ( 34.96779545965576100, -20.32149963875679400, -23.67186603788615800 ) ) ; +#9695 = CARTESIAN_POINT ( 'NONE', ( 14.48917763317225900, -19.19247813904650000, 22.31409069506902300 ) ) ; +#9696 = CARTESIAN_POINT ( 'NONE', ( 6.350314018712555100, -28.97032376310158600, 22.62189021562372900 ) ) ; +#9697 = CARTESIAN_POINT ( 'NONE', ( 7.901192630536142400, -31.56038146495063000, 24.13144155331847100 ) ) ; +#9698 = CARTESIAN_POINT ( 'NONE', ( 14.79083753135674900, -100.0000000000000100, -37.21869687476576900 ) ) ; +#9699 = CARTESIAN_POINT ( 'NONE', ( 10.94143456051393800, -30.82652261103643100, 26.84623168067519600 ) ) ; +#9700 = EDGE_CURVE ( 'NONE', #6128, #2040, #5796, .T. ) ; +#9701 = CARTESIAN_POINT ( 'NONE', ( 0.8450799996949932600, -7.781481582010830100, -21.43596316075076300 ) ) ; +#9702 = EDGE_CURVE ( 'NONE', #5893, #11068, #5240, .T. ) ; +#9703 = CARTESIAN_POINT ( 'NONE', ( 33.17112466298284100, -30.66135959901208000, 27.28753511151012000 ) ) ; +#9704 = CARTESIAN_POINT ( 'NONE', ( 44.97161784026552300, 9.894538436513098400, 16.11193963103031400 ) ) ; +#9705 = VECTOR ( 'NONE', #7789, 1000.000000000000100 ) ; +#9706 = CARTESIAN_POINT ( 'NONE', ( 17.88322539218318100, -31.22277490459410400, 28.68222298652693400 ) ) ; +#9707 = CARTESIAN_POINT ( 'NONE', ( 12.94428570669950500, -30.66333771564540500, 27.70348722059302900 ) ) ; +#9708 = CARTESIAN_POINT ( 'NONE', ( 9.318741903035256500, -31.12006303848832500, 25.68364293092089300 ) ) ; +#9709 = CARTESIAN_POINT ( 'NONE', ( 6.050532966968412500, -30.55079519729965300, 21.46087037243998800 ) ) ; +#9710 = CARTESIAN_POINT ( 'NONE', ( 3.144637605134213300, -9.304669351616958300, -24.07567090176479100 ) ) ; +#9711 = ADVANCED_FACE ( 'NONE', ( #5889 ), #10363, .F. ) ; +#9712 = CARTESIAN_POINT ( 'NONE', ( 10.76665155102035100, -11.92564278980251700, -25.00000000000192200 ) ) ; +#9713 = CARTESIAN_POINT ( 'NONE', ( 37.89853731911059500, -29.52682343472169500, 24.19723651867476400 ) ) ; +#9714 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.312445283851795700, -16.46149188825385300 ) ) ; +#9715 = CARTESIAN_POINT ( 'NONE', ( 35.04370456185250800, -30.58343130238960600, 26.40828166016323300 ) ) ; +#9716 = AXIS2_PLACEMENT_3D ( 'NONE', #2445, #9598, #3474 ) ; +#9717 = CARTESIAN_POINT ( 'NONE', ( 44.26973759422823900, -9.781767716595727100, 13.85714517577103600 ) ) ; +#9718 = EDGE_LOOP ( 'NONE', ( #11408, #11596, #11866, #11888 ) ) ; +#9719 = CARTESIAN_POINT ( 'NONE', ( 12.70225910812588500, -9.982245788213168300, -25.00000000000154900 ) ) ; +#9720 = CARTESIAN_POINT ( 'NONE', ( 15.80528969643074600, -31.06759886309054200, 28.41185479211662500 ) ) ; +#9721 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999998200, -22.47141459896703000, -12.95292418916798200 ) ) ; +#9722 = CARTESIAN_POINT ( 'NONE', ( 7.406450758128522200, -30.80842160960178300, 24.30051669220458900 ) ) ; +#9723 = CARTESIAN_POINT ( 'NONE', ( 9.584155368379324400, -31.01856920662456900, 26.21773775362325400 ) ) ; +#9724 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#9725 = EDGE_CURVE ( 'NONE', #4399, #3358, #5572, .T. ) ; +#9726 = CARTESIAN_POINT ( 'NONE', ( 39.65197365522232800, -29.37641583230124100, 22.11936804372285800 ) ) ; +#9727 = CYLINDRICAL_SURFACE ( 'NONE', #61, 14.99999999999999800 ) ; +#9728 = AXIS2_PLACEMENT_3D ( 'NONE', #7551, #1437, #8574 ) ; +#9729 = CARTESIAN_POINT ( 'NONE', ( 1.300166355428729300, -8.366670019611826000, 18.62556400665412700 ) ) ; +#9730 = VERTEX_POINT ( 'NONE', #11156 ) ; +#9731 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -3.903127820947817500E-015, 22.50000000000000400 ) ) ; +#9732 = CARTESIAN_POINT ( 'NONE', ( 1.708702623837155200E-013, -7.965797397344211100, 11.68758122751145700 ) ) ; +#9733 = CARTESIAN_POINT ( 'NONE', ( 39.66675665300240900, -29.66073502123909100, 18.51669749427867000 ) ) ; +#9734 = CARTESIAN_POINT ( 'NONE', ( 16.94735850724734000, -30.73008496448599700, 28.68737676356955300 ) ) ; +#9735 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2233, #10381, #4258 ), + ( #11404, #5285, #12378 ), + ( #6325, #272, #7377 ), + ( #1275, #8405, #2274 ), + ( #9421, #3296, #10427 ), + ( #4300, #11450, #5331 ), + ( #12419, #6369, #322 ), + ( #7424, #1318, #8454 ), + ( #2317, #9461, #3339 ), + ( #10473, #4342, #11490 ), + ( #5384, #12459, #6415 ), + ( #371, #7472, #1361 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.002202791427143635500, 0.004405582854287271000, 0.006608374281430906500, 0.007709769995002724300, 0.008811165708574542100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811864071300, 1.000000000000000000), + ( 1.000000000000000000, 0.7361760219869062400, 1.000000000000000000), + ( 1.000000000000000000, 0.7634297777496063000, 1.000000000000000000), + ( 1.000000000000000000, 0.8144216211370990400, 1.000000000000000000), + ( 1.000000000000000000, 0.8381632341656193300, 1.000000000000000000), + ( 1.000000000000000000, 0.8799837724507610900, 1.000000000000000000), + ( 1.000000000000000000, 0.8979876038426755100, 1.000000000000000000), + ( 1.000000000000000000, 0.9192368248551549000, 1.000000000000000000), + ( 1.000000000000000000, 0.9254084743227716200, 1.000000000000000000), + ( 1.000000000000000000, 0.9355640192954605100, 1.000000000000000000), + ( 1.000000000000000000, 0.9394940960653102000, 1.000000000000000000), + ( 1.000000000000000000, 0.9423506181502273600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#9736 = CARTESIAN_POINT ( 'NONE', ( 33.55905795990069900, -14.02483040503609000, -25.18555845189328900 ) ) ; +#9737 = CARTESIAN_POINT ( 'NONE', ( 5.758510054856537300, -30.30640733592239800, 22.60863666929724400 ) ) ; +#9738 = CARTESIAN_POINT ( 'NONE', ( 11.77480619054123100, -31.45604376314280200, 18.78051005900595900 ) ) ; +#9739 = CARTESIAN_POINT ( 'NONE', ( 16.38391811981080400, -99.99999999999998600, 21.44949915029522100 ) ) ; +#9740 = CARTESIAN_POINT ( 'NONE', ( 10.95037174508919300, -30.33862652752768000, 26.91308226458363600 ) ) ; +#9741 = EDGE_CURVE ( 'NONE', #10459, #11256, #12962, .T. ) ; +#9742 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, -17.49999999999999600 ) ) ; +#9743 = EDGE_LOOP ( 'NONE', ( #544, #4618, #5912, #3773, #12204 ) ) ; +#9744 = CARTESIAN_POINT ( 'NONE', ( 33.15963744774948200, -30.98828311440103500, 27.20258586216053200 ) ) ; +#9745 = CARTESIAN_POINT ( 'NONE', ( 10.83073500329832800, -12.50000000000000900, 17.99045520169960400 ) ) ; +#9746 = CARTESIAN_POINT ( 'NONE', ( 25.05794980690656700, -33.35025653084942100, 26.50741664928542100 ) ) ; +#9747 = CIRCLE ( 'NONE', #4971, 2.499999999999998700 ) ; +#9748 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.500000000000000000, -23.00000000000000000 ) ) ; +#9749 = CARTESIAN_POINT ( 'NONE', ( 13.25235866978254200, -30.83003562587540000, 27.77952159191404000 ) ) ; +#9750 = CARTESIAN_POINT ( 'NONE', ( 9.201597253531289800, -30.35900078152769800, 25.99572689322462100 ) ) ; +#9751 = CARTESIAN_POINT ( 'NONE', ( 5.606670226121732300, -10.81415907892692200, -24.27190047820795000 ) ) ; +#9752 = EDGE_LOOP ( 'NONE', ( #5355, #5531, #5676, #5822 ) ) ; +#9753 = CARTESIAN_POINT ( 'NONE', ( 38.02338070817278000, -30.57289330157359700, 24.12246583911750600 ) ) ; +#9754 = CARTESIAN_POINT ( 'NONE', ( -3.165870343657672900E-014, -6.162799226980844500, -20.53615480885344300 ) ) ; +#9755 = CARTESIAN_POINT ( 'NONE', ( 34.95956633869263900, -31.14757813332655400, 26.16348847851008200 ) ) ; +#9756 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238600 ) ) ; +#9757 = CARTESIAN_POINT ( 'NONE', ( 11.79508170263178700, -10.53293347023963600, -25.04881046756921500 ) ) ; +#9758 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, 3.189999999999994200 ) ) ; +#9759 = CARTESIAN_POINT ( 'NONE', ( 10.73475368429624800, -23.59796543233716200, -24.18601654934356700 ) ) ; +#9760 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #7980, #6938, #12926 ), + ( #5892, #11969, #4860 ), + ( #10972, #3829, #9955 ), + ( #2825, #8949, #1809 ), + ( #7934, #812, #6893 ), + ( #12887, #5849, #11934 ), + ( #4814, #10924, #3785 ), + ( #9911, #2777, #8909 ), + ( #1770, #7887, #770 ), + ( #6854, #12848, #5805 ), + ( #11889, #4770, #10874 ), + ( #3742, #9869, #2735 ), + ( #8861, #1728, #7846 ), + ( #724, #6806, #12810 ), + ( #5761, #11847, #4725 ), + ( #10838, #3701, #9828 ), + ( #2692, #8825, #1686 ), + ( #7803, #683, #6760 ), + ( #12768, #5723, #11806 ), + ( #9780, #4677, #10795 ), + ( #3665, #2648, #8783 ), + ( #1642, #7753, #643 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.002379877100056139000, 0.003772389438089032200, 0.004468645607105479000, 0.005164901776121924900, 0.006557414114154817700, 0.007949926452187710400, 0.009342438790220602300, 0.01003869495923704800, 0.01073495112825349600, 0.01212746346628638900, 0.01351997580431928100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9645529253283152700, 1.000000000000000000), + ( 1.000000000000000000, 0.9638725126741558600, 1.000000000000000000), + ( 1.000000000000000000, 0.9635348091197716300, 1.000000000000000000), + ( 1.000000000000000000, 0.9636156598339684600, 1.000000000000000000), + ( 1.000000000000000000, 0.9637404755735855500, 1.000000000000000000), + ( 1.000000000000000000, 0.9641985343696705100, 1.000000000000000000), + ( 1.000000000000000000, 0.9645334962674293500, 1.000000000000000000), + ( 1.000000000000000000, 0.9658368961906446100, 1.000000000000000000), + ( 1.000000000000000000, 0.9671071713816489200, 1.000000000000000000), + ( 1.000000000000000000, 0.9704063337307956600, 1.000000000000000000), + ( 1.000000000000000000, 0.9724567043568316200, 1.000000000000000000), + ( 1.000000000000000000, 0.9770395446292045000, 1.000000000000000000), + ( 1.000000000000000000, 0.9795856483225113800, 1.000000000000000000), + ( 1.000000000000000000, 0.9835861897503035400, 1.000000000000000000), + ( 1.000000000000000000, 0.9849552471776639200, 1.000000000000000000), + ( 1.000000000000000000, 0.9876530001604060200, 1.000000000000000000), + ( 1.000000000000000000, 0.9889851417694185400, 1.000000000000000000), + ( 1.000000000000000000, 0.9928327100847754700, 1.000000000000000000), + ( 1.000000000000000000, 0.9952144642430346100, 1.000000000000000000), + ( 1.000000000000000000, 0.9988166607409499900, 1.000000000000000000), + ( 1.000000000000000000, 1.000004965376563000, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#9761 = CARTESIAN_POINT ( 'NONE', ( 7.295259193639801700, -29.82927976433390800, 24.58067104408871400 ) ) ; +#9762 = CARTESIAN_POINT ( 'NONE', ( 6.680880968198204400, -28.72579692247121800, 22.38450868785782100 ) ) ; +#9763 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999997900, -5.000000000000134100, -19.35342349036124400 ) ) ; +#9764 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10640, #7685, #9717, #3596, #10722, #4606, #11743, #5649 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( -5.999999999767368500E-008, 0.0008574241807249027800, 0.001714908361449803300, 0.003429876722899600500 ), + .UNSPECIFIED. ) ; +#9765 = CARTESIAN_POINT ( 'NONE', ( 39.32760378537492600, -95.07596123493894400, -0.5259895963437636300 ) ) ; +#9766 = CARTESIAN_POINT ( 'NONE', ( 39.09476581081458600, -30.54088516875942700, 21.92594988559296400 ) ) ; +#9767 = CIRCLE ( 'NONE', #6419, 5.000000000000000000 ) ; +#9768 = CARTESIAN_POINT ( 'NONE', ( 10.03049999227065400, -20.64325179671971700, -23.04477360023137300 ) ) ; +#9769 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999998200, -22.30124848154067900, -11.86497450671060600 ) ) ; +#9770 = CARTESIAN_POINT ( 'NONE', ( 34.97736009079064000, -99.99999999999998600, 19.74819618676634600 ) ) ; +#9771 = CARTESIAN_POINT ( 'NONE', ( 20.14068908928016900, -27.98733298566502000, 27.51102980484074600 ) ) ; +#9772 = ORIENTED_EDGE ( 'NONE', *, *, #6664, .F. ) ; +#9773 = CARTESIAN_POINT ( 'NONE', ( 6.219716731072868000, -29.12423686732579100, 22.79216399374828900 ) ) ; +#9774 = CARTESIAN_POINT ( 'NONE', ( 10.88733980100789500, -37.74862711309485500, 16.98544764958407400 ) ) ; +#9775 = ORIENTED_EDGE ( 'NONE', *, *, #3798, .T. ) ; +#9776 = CARTESIAN_POINT ( 'NONE', ( 6.256867239339362300, -97.40634803306923600, 18.37707088525525400 ) ) ; +#9777 = CARTESIAN_POINT ( 'NONE', ( 11.15291036246184800, -31.00724642589512200, 26.87559632650902200 ) ) ; +#9778 = LINE ( 'NONE', #4728, #11826 ) ; +#9779 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9780 = CARTESIAN_POINT ( 'NONE', ( 38.80088757492159600, -7.949676436724657500, -24.99482238110223900 ) ) ; +#9781 = CARTESIAN_POINT ( 'NONE', ( 32.86686649362287900, -30.58887153855669500, 27.41626609110384600 ) ) ; +#9782 = CARTESIAN_POINT ( 'NONE', ( 2.136676405743123600, -9.166810606121163800, 18.10840629608688300 ) ) ; +#9783 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000000, -3.189999999999994200 ) ) ; +#9784 = CARTESIAN_POINT ( 'NONE', ( 13.25199654704213300, -30.75070618347650300, 27.79298182919546500 ) ) ; +#9785 = ORIENTED_EDGE ( 'NONE', *, *, #12079, .T. ) ; +#9786 = CARTESIAN_POINT ( 'NONE', ( 9.509366963593196300, -31.16642685991497800, 25.78104357802060100 ) ) ; +#9787 = CARTESIAN_POINT ( 'NONE', ( 11.34922795721161700, -17.38698142890971700, -25.01982245009364900 ) ) ; +#9788 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000000, -18.70000000000001400 ) ) ; +#9789 = CARTESIAN_POINT ( 'NONE', ( 5.738976939661142800, -9.107815814868830600, -24.73355862293067300 ) ) ; +#9790 = EDGE_CURVE ( 'NONE', #9645, #5523, #3434, .T. ) ; +#9791 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9792 = VECTOR ( 'NONE', #676, 1000.000000000000000 ) ; +#9793 = CARTESIAN_POINT ( 'NONE', ( 37.66833831708900200, -29.22670820932479100, 24.08387946205611000 ) ) ; +#9794 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000000, -18.70000000000001000 ) ) ; +#9795 = EDGE_CURVE ( 'NONE', #6316, #6834, #2237, .T. ) ; +#9796 = AXIS2_PLACEMENT_3D ( 'NONE', #12662, #3587, #10712 ) ; +#9797 = CARTESIAN_POINT ( 'NONE', ( 34.65095929067356900, -30.47721009370166500, 26.62501672023733700 ) ) ; +#9798 = ORIENTED_EDGE ( 'NONE', *, *, #2232, .F. ) ; +#9799 = CARTESIAN_POINT ( 'NONE', ( 10.48333249054227400, -11.17784876044062700, -25.00000000000000000 ) ) ; +#9800 = AXIS2_PLACEMENT_3D ( 'NONE', #3385, #8546, #2404 ) ; +#9801 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 9.500000000000000000, 25.00000000000000000 ) ) ; +#9802 = CARTESIAN_POINT ( 'NONE', ( 7.872275222600675800, -31.08733690686428000, 24.36764092770714300 ) ) ; +#9803 = ORIENTED_EDGE ( 'NONE', *, *, #10741, .T. ) ; +#9804 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#9805 = CARTESIAN_POINT ( 'NONE', ( 42.61411174058773800, -9.207030657298652400, -23.44990588904107700 ) ) ; +#9806 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #188, #6196, #8323 ), + ( #2195, #9331, #3208 ), + ( #10344, #4222, #11362 ), + ( #5246, #12343, #6285 ), + ( #235, #7341, #1239 ), + ( #8362, #2241, #9382 ), + ( #3254, #10389, #4266 ), + ( #11413, #5292, #12384 ), + ( #6334, #279, #7386 ), + ( #1282, #8419, #2279 ), + ( #9428, #3305, #10435 ), + ( #4309, #11460, #5342 ), + ( #12427, #6378, #331 ), + ( #7434, #1327, #8464 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.02947061465220828700, 0.03275945131945627600, 0.03604828798670425800, 0.03687049715351625700, 0.03769270632032825600, 0.03933712465395224800, 0.04262596132120023700 ), + ( 0.0000000000000000000, 0.5306459368286544600 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9662662388186966700, 0.9683338442470070800), + ( 1.000000000000000000, 0.9662662388186966700, 0.9683338442470070800), + ( 1.000000000000000000, 0.9662662388186964400, 0.9683338442470068600), + ( 1.000000000000000000, 0.9662662388186964400, 0.9683338442470068600), + ( 1.000000000000000000, 0.9662662388186964400, 0.9683338442470068600), + ( 1.000000000000000000, 0.9662662388186964400, 0.9683338442470068600), + ( 1.000000000000000000, 0.9662662388186971100, 0.9683338442470073000), + ( 1.000000000000000000, 0.9662662388186971100, 0.9683338442470073000), + ( 1.000000000000000000, 0.9662662388186967800, 0.9683338442470070800), + ( 1.000000000000000000, 0.9662662388186967800, 0.9683338442470070800), + ( 1.000000000000000000, 0.9662662388186964400, 0.9683338442470068600), + ( 1.000000000000000000, 0.9662662388186964400, 0.9683338442470068600), + ( 1.000000000000000000, 0.9662662388186972200, 0.9683338442470075200), + ( 1.000000000000000000, 0.9662662388186972200, 0.9683338442470075200) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#9807 = CARTESIAN_POINT ( 'NONE', ( 36.97706053404721900, -89.55013418174677000, 4.966258557461228100 ) ) ; +#9808 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.57594304548452200, 12.90933256482883900 ) ) ; +#9809 = CARTESIAN_POINT ( 'NONE', ( 39.04743385299217800, -29.05243838231897500, 22.29672992217066600 ) ) ; +#9810 = VERTEX_POINT ( 'NONE', #4102 ) ; +#9811 = ORIENTED_EDGE ( 'NONE', *, *, #10044, .F. ) ; +#9812 = CARTESIAN_POINT ( 'NONE', ( 20.06239422145300800, -31.29661376143278100, 28.74483239613230600 ) ) ; +#9813 = CARTESIAN_POINT ( 'NONE', ( 9.181218861637530500, -18.01952621950787400, -23.92411588522120500 ) ) ; +#9814 = ORIENTED_EDGE ( 'NONE', *, *, #7188, .T. ) ; +#9815 = CARTESIAN_POINT ( 'NONE', ( 36.44211339376946800, -30.37203768606643500, 25.56830405721494500 ) ) ; +#9816 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#9817 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9818 = EDGE_CURVE ( 'NONE', #11056, #10469, #1101, .T. ) ; +#9819 = ORIENTED_EDGE ( 'NONE', *, *, #4553, .F. ) ; +#9820 = CARTESIAN_POINT ( 'NONE', ( 0.7600769527565074400, -9.576897015378644800, 14.39245304717093700 ) ) ; +#9821 = CARTESIAN_POINT ( 'NONE', ( 6.467122473208910100, -30.73480390311130600, 22.92283787792157000 ) ) ; +#9822 = CARTESIAN_POINT ( 'NONE', ( 8.880948395821496500, -31.90308803100044700, 24.97660230409144700 ) ) ; +#9823 = CARTESIAN_POINT ( 'NONE', ( 27.01094513750120600, -23.90169884688448200, -27.32241939169511400 ) ) ; +#9824 = CARTESIAN_POINT ( 'NONE', ( 11.13381378461962100, -30.57075298956478400, 26.99470404393872200 ) ) ; +#9825 = ORIENTED_EDGE ( 'NONE', *, *, #12627, .F. ) ; +#9826 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000900, 20.69000000000000100 ) ) ; +#9827 = VERTEX_POINT ( 'NONE', #2168 ) ; +#9828 = CARTESIAN_POINT ( 'NONE', ( 38.65405104749453400, -9.607928551899071600, -24.80990655383731200 ) ) ; +#9829 = CARTESIAN_POINT ( 'NONE', ( 32.86686897846324500, -30.87150479868380200, 27.36642999847107700 ) ) ; +#9830 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9831 = CARTESIAN_POINT ( 'NONE', ( 6.063751050260471200, -28.88119157926097800, 21.84817237871927300 ) ) ; +#9832 = CARTESIAN_POINT ( 'NONE', ( 13.35428227075132500, -30.85522860838556300, 27.80725121592011500 ) ) ; +#9833 = CARTESIAN_POINT ( 'NONE', ( 9.383777069921038100, -30.56010048259400900, 26.08353535433364100 ) ) ; +#9834 = CARTESIAN_POINT ( 'NONE', ( 26.52817656822050900, -30.69646541323924200, 28.80167723652863600 ) ) ; +#9835 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -5.000000000000002700, -19.35342349036134000 ) ) ; +#9836 = CARTESIAN_POINT ( 'NONE', ( 6.453169010005599800, -7.742690777696232400, -25.00000000000000000 ) ) ; +#9837 = ORIENTED_EDGE ( 'NONE', *, *, #3557, .T. ) ; +#9838 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 12.00000000000000000, 25.00000000000000400 ) ) ; +#9839 = ORIENTED_EDGE ( 'NONE', *, *, #642, .T. ) ; +#9840 = CARTESIAN_POINT ( 'NONE', ( 38.10228064027606400, -30.27402208183976000, 24.28293802704629600 ) ) ; +#9841 = ORIENTED_EDGE ( 'NONE', *, *, #642, .F. ) ; +#9842 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999990100, -23.91420473869548500, -27.45344971053350500 ) ) ; +#9843 = CARTESIAN_POINT ( 'NONE', ( 34.61054372021548200, -31.04359563467785700, 26.44887276600139400 ) ) ; +#9844 = CARTESIAN_POINT ( 'NONE', ( 33.55689879419441000, -30.29727838675767900, 27.12861395151055900 ) ) ; +#9845 = CARTESIAN_POINT ( 'NONE', ( 32.09863200989554600, -9.562556682370415100, -24.99999999999999600 ) ) ; +#9846 = ORIENTED_EDGE ( 'NONE', *, *, #7545, .T. ) ; +#9847 = CARTESIAN_POINT ( 'NONE', ( 7.539315854843242600, -30.20107616156390800, 24.87493276573148300 ) ) ; +#9848 = CARTESIAN_POINT ( 'NONE', ( 0.9084284741217723000, -8.452784834690811900, 16.38149653183796100 ) ) ; +#9849 = VECTOR ( 'NONE', #1862, 1000.000000000000000 ) ; +#9850 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000000, 1.200000000000012600 ) ) ; +#9851 = CARTESIAN_POINT ( 'NONE', ( 33.91260502183480700, -95.07596123493894400, 13.87870138358447000 ) ) ; +#9852 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9853 = AXIS2_PLACEMENT_3D ( 'NONE', #81, #36, #6 ) ; +#9854 = CYLINDRICAL_SURFACE ( 'NONE', #4244, 1.200000000000008400 ) ; +#9855 = CARTESIAN_POINT ( 'NONE', ( 39.59252063031219400, -30.21883442408290700, 22.07981113263831900 ) ) ; +#9856 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -100.0000000000000300, -25.63802908547509300 ) ) ; +#9857 = CARTESIAN_POINT ( 'NONE', ( 10.21171711853361000, -23.55183850660587600, -23.71385866984693200 ) ) ; +#9858 = CARTESIAN_POINT ( 'NONE', ( 36.25008251772082700, -31.16164430139414400, 25.16873594365350500 ) ) ; +#9859 = CARTESIAN_POINT ( 'NONE', ( 26.05676063327363300, -31.26596940722211600, 28.73156040098827500 ) ) ; +#9860 = CARTESIAN_POINT ( 'NONE', ( 44.80809080868888100, -6.688053714119012800, 16.20771987782674700 ) ) ; +#9861 = CARTESIAN_POINT ( 'NONE', ( 10.79237086204282500, -95.07596123493894400, 14.86765191854901700 ) ) ; +#9862 = FACE_OUTER_BOUND ( 'NONE', #8135, .T. ) ; +#9863 = CARTESIAN_POINT ( 'NONE', ( 6.085955457685144200, -29.59075350237209900, 23.20376123129654300 ) ) ; +#9864 = CARTESIAN_POINT ( 'NONE', ( 12.55478051384234400, -31.54315705788461000, 19.23894334179570000 ) ) ; +#9865 = ORIENTED_EDGE ( 'NONE', *, *, #5879, .F. ) ; +#9866 = CARTESIAN_POINT ( 'NONE', ( 37.27864902483101900, -23.27181150785460400, -20.87147203284448700 ) ) ; +#9867 = CARTESIAN_POINT ( 'NONE', ( 11.25706622465395600, -31.06294009820693000, 26.89929085921294700 ) ) ; +#9868 = CARTESIAN_POINT ( 'NONE', ( 3.100616795308668300, -9.891403686358632500, -22.49922506256810500 ) ) ; +#9870 = AXIS2_PLACEMENT_3D ( 'NONE', #12985, #12971, #12905 ) ; +#9869 = CARTESIAN_POINT ( 'NONE', ( 39.82177793369884000, -9.652892883284174300, -24.39247496376475200 ) ) ; +#9871 = CARTESIAN_POINT ( 'NONE', ( 32.66241248192715600, -30.53850444122961600, 27.49627600596556900 ) ) ; +#9872 = CARTESIAN_POINT ( 'NONE', ( 5.276256890698001600, -13.54323068083280600, -22.63479153235193700 ) ) ; +#9873 = CARTESIAN_POINT ( 'NONE', ( 1.269111307384685600, -8.973361689142107500, 16.54035294287772800 ) ) ; +#9874 = CARTESIAN_POINT ( 'NONE', ( 32.32292178145908000, -9.562556682370397400, -24.99999999999998900 ) ) ; +#9875 = CARTESIAN_POINT ( 'NONE', ( 13.35515163631301900, -30.79307723074093400, 27.81916039306640100 ) ) ; +#9876 = CYLINDRICAL_SURFACE ( 'NONE', #12864, 2.499999999999998700 ) ; +#9877 = CARTESIAN_POINT ( 'NONE', ( 9.503396356742117100, -29.79067422198051700, 26.03292893234687700 ) ) ; +#9878 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000002800, -5.121940029427737100, 16.16114135537784000 ) ) ; +#9879 = CARTESIAN_POINT ( 'NONE', ( 5.840284653773480300, -23.69592336751677700, 12.43677308337289800 ) ) ; +#9880 = CARTESIAN_POINT ( 'NONE', ( 37.08955302715500600, -100.0000000000000100, -2.838808089234965000 ) ) ; +#9881 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884056200E-016, -7.316754503641624800, -16.45356000746259900 ) ) ; +#9882 = CARTESIAN_POINT ( 'NONE', ( 37.64956337138997400, -31.03053947666436600, 23.74918927284775400 ) ) ; +#9883 = CARTESIAN_POINT ( 'NONE', ( 26.44601425866861900, -20.92654192925591500, -26.92664414797006600 ) ) ; +#9884 = CARTESIAN_POINT ( 'NONE', ( 34.43564830729416600, -30.26237397478423200, 26.72370119869474400 ) ) ; +#9885 = CARTESIAN_POINT ( 'NONE', ( 35.71042886239187900, -29.70883501906914100, 25.86890717656514500 ) ) ; +#9886 = LINE ( 'NONE', #4154, #2090 ) ; +#9887 = CARTESIAN_POINT ( 'NONE', ( 33.19100792882554900, -9.750579585026462900, -25.00000000000000000 ) ) ; +#9888 = ORIENTED_EDGE ( 'NONE', *, *, #1467, .T. ) ; +#9889 = CARTESIAN_POINT ( 'NONE', ( 7.886737840639141500, -29.33557170707682700, 24.66092104419445600 ) ) ; +#9890 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -6.938893903907222500E-016 ) ) ; +#9891 = CARTESIAN_POINT ( 'NONE', ( 7.046902362643130900, -30.97020253306855500, 23.37075691670160500 ) ) ; +#9892 = CARTESIAN_POINT ( 'NONE', ( 25.91844926777715200, -95.07596123493893000, 9.998812624608781600 ) ) ; +#9893 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -2.500000000000016400, 25.00000000000000000 ) ) ; +#9894 = EDGE_CURVE ( 'NONE', #9213, #2214, #11904, .T. ) ; +#9895 = LINE ( 'NONE', #3513, #7539 ) ; +#9896 = CARTESIAN_POINT ( 'NONE', ( 38.64950630013780900, -28.97030664066074500, 22.62226483314041700 ) ) ; +#9897 = DIRECTION ( 'NONE', ( -0.02351537505554111500, -0.9997234753350534600, 0.0000000000000000000 ) ) ; +#9898 = CARTESIAN_POINT ( 'NONE', ( 10.45205437495688200, -20.66443816559687700, -23.41399565769647500 ) ) ; +#9899 = CARTESIAN_POINT ( 'NONE', ( 36.32657129990443000, -30.14532178023185700, 25.63877401745483200 ) ) ; +#9900 = CARTESIAN_POINT ( 'NONE', ( 4.138360505872719300, -7.346822827177222200, 25.00000000000000000 ) ) ; +#9901 = CARTESIAN_POINT ( 'NONE', ( 26.93351225870617700, -18.05013747565774200, -28.07633320407119700 ) ) ; +#9902 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999889900, -5.253480086825516300, 16.26018098588648500 ) ) ; +#9903 = CARTESIAN_POINT ( 'NONE', ( 14.22583912569972900, -95.07596123493894400, 17.17054295756077700 ) ) ; +#9904 = CARTESIAN_POINT ( 'NONE', ( 6.791435498152074100, -30.90605858315381500, 23.02701090857215500 ) ) ; +#9905 = VECTOR ( 'NONE', #410, 1000.000000000000000 ) ; +#9906 = CARTESIAN_POINT ( 'NONE', ( 6.401043034764879500, -26.10230852249977200, 13.55110401343069900 ) ) ; +#9907 = CARTESIAN_POINT ( 'NONE', ( 43.98960081476276000, -8.016398839678808800, -21.63619036430275600 ) ) ; +#9908 = CARTESIAN_POINT ( 'NONE', ( 11.23133521037205400, -30.68269905974234700, 27.02363611596495800 ) ) ; +#9909 = AXIS2_PLACEMENT_3D ( 'NONE', #964, #916, #887 ) ; +#9910 = CARTESIAN_POINT ( 'NONE', ( 11.26898020412546400, -19.29346946999330100, 20.52468142779425300 ) ) ; +#9911 = CARTESIAN_POINT ( 'NONE', ( 41.57428639847153600, -9.273906545546593000, -24.26560510726427800 ) ) ; +#9912 = CARTESIAN_POINT ( 'NONE', ( 32.66684265284181500, -30.77996407138404000, 27.46753421072135700 ) ) ; +#9913 = CARTESIAN_POINT ( 'NONE', ( 11.21320343559641600, -89.20772034660433300, 11.03354182248334700 ) ) ; +#9914 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -12.49999999999999600, -10.20941827348498200 ) ) ; +#9915 = CARTESIAN_POINT ( 'NONE', ( 33.29527624821550100, -9.794803467509623800, -25.00000000000000000 ) ) ; +#9916 = CARTESIAN_POINT ( 'NONE', ( 13.55966411534305200, -30.84518153517059200, 27.87328429804789600 ) ) ; +#9917 = CARTESIAN_POINT ( 'NONE', ( 9.500305639656915000, -30.78002770396484400, 26.06662586536671000 ) ) ; +#9918 = VECTOR ( 'NONE', #9424, 1000.000000000000000 ) ; +#9919 = CARTESIAN_POINT ( 'NONE', ( 0.09708713634879612100, 10.18993461597465700, 17.13949627301117600 ) ) ; +#9920 = CARTESIAN_POINT ( 'NONE', ( 12.96812316345091500, -20.27911212713925700, 21.44367878376877500 ) ) ; +#9921 = CARTESIAN_POINT ( 'NONE', ( 30.57931111076171900, -100.0000000000000100, 5.299666842386454100 ) ) ; +#9922 = CARTESIAN_POINT ( 'NONE', ( 5.859156363877806600, -30.47326289607464000, 21.47454124755819600 ) ) ; +#9923 = CARTESIAN_POINT ( 'NONE', ( 37.92777031981251700, -30.03966725919398700, 24.47788948833633100 ) ) ; +#9924 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11671, #9831, #9686, #9642, #9621, #9603, #9495, #9478, #9453, #9436, #9413, #9394, #9364, #9342, #9299, #9215, #9195, #9168, #9151, #9127, #9108, #10754, #10707, #10668, #9086, #9068, #9044, #8994, #8953, #8913, #8864, #8847, #8828, #8812, #8787, #8770, #8746, #8725, #8700, #8683, #8640, #8619, #8603, #8575, #8555, #8532, #8515, #8450, #8397, #8378, #8351, #8333, #8294, #8275, #8179, #8154, #8136, #8110, #8092, #8067, #8045, #8024, #7937, #7890, #7851, #7831, #7784, #7742, #7674, #7656, #7632 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 1, 1, 2, 2, 2, 1, 1, 1, 2, 2, 2, 2, 1, 1, 1, 1, 2, 2, 2, 2, 2, 1, 1, 2, 2, 2, 2, 1, 1, 2, 2, 2, 2, 2, 1, 1, 2, 2, 4 ), + ( 0.0000000000000000000, 0.03125000000002610400, 0.04687500000003879500, 0.05468750000004505400, 0.05859375000004811400, 0.06054687500004999500, 0.06152343750005093100, 0.06250000000005187500, 0.09375000000008286400, 0.1093750000000978100, 0.1171875000001052800, 0.1210937500001094000, 0.1230468750001110800, 0.1250000000001127700, 0.1875000000001461100, 0.2187500000001624300, 0.2343750000001706700, 0.2421875000001744400, 0.2460937500001764400, 0.2480468750001771400, 0.2490234375001773600, 0.2500000000001775200, 0.3750000000001582600, 0.4375000000001481600, 0.4687500000001431600, 0.4843750000001405000, 0.4921875000001392800, 0.4960937500001384400, 0.5000000000001375600, 0.6250000000001186800, 0.6875000000001091300, 0.7187500000001040300, 0.7343750000001018100, 0.7421875000001012500, 0.7460937500001003600, 0.7480468750000997000, 0.7500000000000991400, 0.8125000000000749400, 0.8437500000000628400, 0.8593750000000568400, 0.8671875000000536200, 0.8750000000000502900, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#9925 = CARTESIAN_POINT ( 'NONE', ( 31.66849075377564700, -18.96086974984058300, -26.58004310751188700 ) ) ; +#9926 = CARTESIAN_POINT ( 'NONE', ( 34.44858057629280500, -30.81923269297076800, 26.65122039948500500 ) ) ; +#9927 = CARTESIAN_POINT ( 'NONE', ( 37.65585627727095600, -29.20070226656556800, 24.06408259436720000 ) ) ; +#9928 = FACE_OUTER_BOUND ( 'NONE', #1254, .T. ) ; +#9929 = CARTESIAN_POINT ( 'NONE', ( 20.14039441766889400, -33.35446909076583900, 26.50697697917649300 ) ) ; +#9930 = CARTESIAN_POINT ( 'NONE', ( 33.59196571690987600, -9.948578853302926500, -24.99999999999999600 ) ) ; +#9931 = CARTESIAN_POINT ( 'NONE', ( 7.734630345440309400, -30.46467165373350000, 24.95509046259744000 ) ) ; +#9932 = CARTESIAN_POINT ( 'NONE', ( 15.46456187156262600, -22.42654453509724600, -26.61144050954498800 ) ) ; +#9933 = CARTESIAN_POINT ( 'NONE', ( 8.997781311714996700, -31.16893503770342700, 25.37680194361914600 ) ) ; +#9934 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, 9.500000000000000000, 22.50000000000000700 ) ) ; +#9935 = CARTESIAN_POINT ( 'NONE', ( 44.69744481375924000, 10.83537269980635800, -24.69744481375919100 ) ) ; +#9936 = CARTESIAN_POINT ( 'NONE', ( 39.59794603543998900, -29.92128962274387000, 22.45516792911944700 ) ) ; +#9937 = ORIENTED_EDGE ( 'NONE', *, *, #43, .F. ) ; +#9938 = EDGE_LOOP ( 'NONE', ( #4986, #4999, #5028, #5057 ) ) ; +#9939 = CARTESIAN_POINT ( 'NONE', ( 31.39021768622651000, -32.82600074630584400, 25.61142328234056000 ) ) ; +#9940 = CARTESIAN_POINT ( 'NONE', ( 9.633218673577053100, -18.02263093450995500, -24.32895876432188600 ) ) ; +#9941 = FACE_OUTER_BOUND ( 'NONE', #610, .T. ) ; +#9942 = CARTESIAN_POINT ( 'NONE', ( 36.23352571333720800, -31.00804946247311700, 25.35790806883913400 ) ) ; +#9943 = CARTESIAN_POINT ( 'NONE', ( 7.642658559320828700, -11.10484932292043900, 23.78373770899017000 ) ) ; +#9944 = CARTESIAN_POINT ( 'NONE', ( 29.34901860746962400, -23.85139525592657600, -26.79956851354522800 ) ) ; +#9945 = CARTESIAN_POINT ( 'NONE', ( 41.49071048993295800, -17.01857902013400500, 8.005331014629273800 ) ) ; +#9946 = CARTESIAN_POINT ( 'NONE', ( 20.11130098688546400, -33.86963066632296200, 20.79114009398124800 ) ) ; +#9947 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999300, -94.71789415300563100, 18.78842146235869100 ) ) ; +#9948 = CARTESIAN_POINT ( 'NONE', ( 6.142145581294485600, -29.97641397768709500, 23.42234497956405200 ) ) ; +#9949 = CARTESIAN_POINT ( 'NONE', ( 11.72315723901015300, -38.09223847783039200, 17.52858580492723600 ) ) ; +#9950 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -12.49999999999999600, -22.94081745177112800 ) ) ; +#9951 = CARTESIAN_POINT ( 'NONE', ( 11.25699572047835400, -30.24986483449317700, 27.04281934273009100 ) ) ; +#9952 = VERTEX_POINT ( 'NONE', #11247 ) ; +#9953 = CARTESIAN_POINT ( 'NONE', ( 8.114167504751908000, -19.47018623352498400, 17.39362809379462900 ) ) ; +#9954 = CARTESIAN_POINT ( 'NONE', ( 39.15978387031335500, -23.69604584631608900, 12.43655451429146000 ) ) ; +#9955 = CARTESIAN_POINT ( 'NONE', ( 40.81661436940732600, -11.36084792755112000, -22.84811893158241200 ) ) ; +#9956 = CARTESIAN_POINT ( 'NONE', ( 32.25896620693000500, -30.61504613041616100, 27.63795326364030600 ) ) ; +#9957 = ORIENTED_EDGE ( 'NONE', *, *, #12152, .T. ) ; +#9958 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999997200, -100.0000000000000300, -26.47069336410936600 ) ) ; +#9959 = CARTESIAN_POINT ( 'NONE', ( 33.77196988713279800, -10.08085583451917200, -25.00000000000000000 ) ) ; +#9960 = CARTESIAN_POINT ( 'NONE', ( 13.56048174945313700, -30.81733855571692600, 27.87863069105368300 ) ) ; +#9961 = CARTESIAN_POINT ( 'NONE', ( 9.531485114922452000, -30.05910839644543100, 26.14440605677398100 ) ) ; +#9962 = CARTESIAN_POINT ( 'NONE', ( 15.81348233509817200, -94.74406870591664600, 18.34820490782196200 ) ) ; +#9963 = ORIENTED_EDGE ( 'NONE', *, *, #4676, .T. ) ; +#9964 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9965 = ORIENTED_EDGE ( 'NONE', *, *, #6822, .F. ) ; +#9966 = CARTESIAN_POINT ( 'NONE', ( 5.101646526981135700, -29.44204814015397900, 21.65637129200303300 ) ) ; +#9967 = CARTESIAN_POINT ( 'NONE', ( 37.55976377080744300, -31.00229222720702500, 23.96603114641553100 ) ) ; +#9968 = ORIENTED_EDGE ( 'NONE', *, *, #3392, .T. ) ; +#9969 = CARTESIAN_POINT ( 'NONE', ( 36.38796192144195600, -19.61922867225111100, -22.48901422891447100 ) ) ; +#9970 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3762, #10899, #4792 ), + ( #11911, #5829, #12870 ), + ( #6875, #791, #7910 ), + ( #1788, #8931, #2802 ), + ( #9932, #3809, #10947 ), + ( #4836, #11951, #5871 ), + ( #12907, #6913, #833 ), + ( #7957, #1833, #8971 ), + ( #2848, #9980, #3850 ), + ( #10994, #4880, #11991 ), + ( #5911, #12943, #6962 ), + ( #870, #8003, #1881 ), + ( #9015, #2892, #10025 ), + ( #3896, #11035, #4929 ), + ( #12035, #5956, #12987 ), + ( #7015, #920, #8040 ), + ( #1926, #9064, #2935 ), + ( #10061, #3937, #11085 ), + ( #4968, #12075, #6003 ), + ( #13026, #7060, #967 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -2.828427186282882400E-005, 0.001987557814965401600, 0.004003399901793632300, 0.006019241988621863000, 0.008035084075450093700, 0.009043005118864209900, 0.01005092616227832400, 0.01206676824910655300, 0.01408261033593478400, 0.01609845242276301500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000), + ( 1.000000000000000000, 1.000012451164646200, 1.000000000000000000), + ( 1.000000000000000000, 0.9982770861779924900, 1.000000000000000000), + ( 1.000000000000000000, 0.9911019630333440800, 1.000000000000000000), + ( 1.000000000000000000, 0.9856501164676994000, 1.000000000000000000), + ( 1.000000000000000000, 0.9714321819464404300, 1.000000000000000000), + ( 1.000000000000000000, 0.9627382433779436700, 1.000000000000000000), + ( 1.000000000000000000, 0.9429112519194096100, 1.000000000000000000), + ( 1.000000000000000000, 0.9319361234872297600, 1.000000000000000000), + ( 1.000000000000000000, 0.9145678934998430200, 1.000000000000000000), + ( 1.000000000000000000, 0.9086016726653151100, 1.000000000000000000), + ( 1.000000000000000000, 0.8965541528790267300, 1.000000000000000000), + ( 1.000000000000000000, 0.8904746057188062100, 1.000000000000000000), + ( 1.000000000000000000, 0.8721847533406573700, 1.000000000000000000), + ( 1.000000000000000000, 0.8598872677044041600, 1.000000000000000000), + ( 1.000000000000000000, 0.8357742114740857000, 1.000000000000000000), + ( 1.000000000000000000, 0.8240863801384200600, 1.000000000000000000), + ( 1.000000000000000000, 0.8016762409668963800, 1.000000000000000000), + ( 1.000000000000000000, 0.7909495558145067700, 1.000000000000000000), + ( 1.000000000000000000, 0.7807658775649277700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#9971 = CARTESIAN_POINT ( 'NONE', ( 34.12710974947598400, -30.15919917230167300, 26.85457396756311600 ) ) ; +#9972 = CARTESIAN_POINT ( 'NONE', ( 38.42128757440956100, -29.02012093710496600, 23.01170876070033300 ) ) ; +#9973 = ORIENTED_EDGE ( 'NONE', *, *, #13075, .F. ) ; +#9974 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999998600, -39.52045731841469900, 19.79474689191102900 ) ) ; +#9975 = AXIS2_PLACEMENT_3D ( 'NONE', #3077, #4083, #11225 ) ; +#9976 = CARTESIAN_POINT ( 'NONE', ( 34.08710803139439300, -10.40044979682746300, -25.00000000000000400 ) ) ; +#9977 = ORIENTED_EDGE ( 'NONE', *, *, #12808, .F. ) ; +#9978 = ORIENTED_EDGE ( 'NONE', *, *, #1272, .F. ) ; +#9979 = CARTESIAN_POINT ( 'NONE', ( 8.002748927931461900, -29.44014547651137900, 24.83969778927855300 ) ) ; +#9980 = CARTESIAN_POINT ( 'NONE', ( 13.33334167828546200, -18.96218029663722900, -26.58027419227058300 ) ) ; +#9981 = CARTESIAN_POINT ( 'NONE', ( 11.25713596768263400, -31.06351300984293200, 26.89903447434005900 ) ) ; +#9982 = CARTESIAN_POINT ( 'NONE', ( 8.343828509952670600, -18.01237507300751500, -23.06837513076482100 ) ) ; +#9983 = CARTESIAN_POINT ( 'NONE', ( 44.38346697805872100, 11.15206692787401000, -22.87669339561167400 ) ) ; +#9984 = CARTESIAN_POINT ( 'NONE', ( 38.64777089420567800, -30.75355599472896300, 22.30849376683150700 ) ) ; +#9985 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -23.91420473869548900, -27.45344971053349400 ) ) ; +#9986 = CARTESIAN_POINT ( 'NONE', ( 11.53527351826104000, -23.65819961492810100, -24.80341313188050400 ) ) ; +#9987 = ORIENTED_EDGE ( 'NONE', *, *, #479, .T. ) ; +#9988 = CARTESIAN_POINT ( 'NONE', ( 36.06285515434751000, -29.81569289110690200, 25.70311164343644000 ) ) ; +#9989 = CARTESIAN_POINT ( 'NONE', ( 9.888847880405300800, -11.13913918719808300, 25.00000000000000000 ) ) ; +#9990 = CARTESIAN_POINT ( 'NONE', ( 33.23149997970656200, -20.72400270512631000, -24.44503501740420500 ) ) ; +#9991 = EDGE_CURVE ( 'NONE', #6834, #10045, #2868, .T. ) ; +#9992 = VERTEX_POINT ( 'NONE', #1206 ) ; +#9993 = CARTESIAN_POINT ( 'NONE', ( 7.500000007721790300, -95.07596123493894400, 12.92967538968956700 ) ) ; +#9994 = CARTESIAN_POINT ( 'NONE', ( 18.74951762258663700, -7.494487863452191000, -32.98867371510161200 ) ) ; +#9995 = CARTESIAN_POINT ( 'NONE', ( 6.792789349161258100, -29.07130894415007900, 23.35031952178647100 ) ) ; +#9996 = CARTESIAN_POINT ( 'NONE', ( 10.33038076505298800, -31.34811569512993400, 17.73981487543911900 ) ) ; +#9997 = CARTESIAN_POINT ( 'NONE', ( 12.30878991077042400, -99.99999999999995700, 20.53078478538610000 ) ) ; +#9998 = CARTESIAN_POINT ( 'NONE', ( 11.43211698514250000, -30.80118502214874000, 27.08700867788396500 ) ) ; +#9999 = ADVANCED_FACE ( 'NONE', ( #7677 ), #9727, .T. ) ; +#10000 = CARTESIAN_POINT ( 'NONE', ( 6.320297571920861800, -19.64369211684834200, 14.31898161594743600 ) ) ; +#10001 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000002100, -27.09143239524033200, 6.754920151478382100 ) ) ; +#10002 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1208, #7313, #3224, #10358 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001031113399997480400 ), + .UNSPECIFIED. ) ; +#10003 = EDGE_LOOP ( 'NONE', ( #1509, #2288, #2922, #1661, #4646 ) ) ; +#10004 = CARTESIAN_POINT ( 'NONE', ( 32.25989258990200900, -30.75781202151351200, 27.62068034359259600 ) ) ; +#10005 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#10006 = CARTESIAN_POINT ( 'NONE', ( 15.68509929449833300, -39.11576237780239000, 19.23299645700124200 ) ) ; +#10007 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999997200, -12.49999999999999600, -11.04208255211925400 ) ) ; +#10008 = ORIENTED_EDGE ( 'NONE', *, *, #9503, .F. ) ; +#10009 = CARTESIAN_POINT ( 'NONE', ( 34.21664332662248900, -10.58095527892572800, -25.00000000000000700 ) ) ; +#10010 = CARTESIAN_POINT ( 'NONE', ( 13.55966631315255500, -30.78700843620593000, 27.88354301428842100 ) ) ; +#10011 = CARTESIAN_POINT ( 'NONE', ( 39.78372942194461400, -29.35026061169146800, 17.29255186581468400 ) ) ; +#10012 = CARTESIAN_POINT ( 'NONE', ( 9.834437685737986700, -31.05610724307627300, 26.10084140511970900 ) ) ; +#10013 = CARTESIAN_POINT ( 'NONE', ( 11.50773512726937800, -14.68724398049300800, -25.20395753333092500 ) ) ; +#10014 = CARTESIAN_POINT ( 'NONE', ( 36.11083704409356400, -94.72617562880718400, 15.98182647784068100 ) ) ; +#10015 = CARTESIAN_POINT ( 'NONE', ( 6.058535962467424900, -30.56547710123261700, 21.52611180905668700 ) ) ; +#10016 = CARTESIAN_POINT ( 'NONE', ( 37.63367852437659200, -29.67643266254023300, 24.53966028479443300 ) ) ; +#10017 = CARTESIAN_POINT ( 'NONE', ( 31.70713475267097800, -10.97665350980291900, -25.17221036458186500 ) ) ; +#10018 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12371, #12302, #12113, #12073 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001725576003991770200 ), + .UNSPECIFIED. ) ; +#10019 = LINE ( 'NONE', #9731, #10340 ) ; +#10020 = CARTESIAN_POINT ( 'NONE', ( 34.16249168086560000, -30.67337001408196100, 26.83844285090086500 ) ) ; +#10021 = CARTESIAN_POINT ( 'NONE', ( 38.73710643314431200, -28.94559622827372200, 22.42208565347291900 ) ) ; +#10022 = EDGE_LOOP ( 'NONE', ( #7611, #7802, #8107, #8579 ) ) ; +#10023 = CARTESIAN_POINT ( 'NONE', ( 34.43320663829683100, -10.97336629406220300, -25.00000000000000400 ) ) ; +#10024 = CARTESIAN_POINT ( 'NONE', ( 8.190916460269415100, -30.82748373694617100, 25.05497066671702200 ) ) ; +#10025 = CARTESIAN_POINT ( 'NONE', ( 15.82553413612394700, -15.25012316531024200, -25.92573836608668700 ) ) ; +#10026 = CARTESIAN_POINT ( 'NONE', ( 13.76586904079734500, -30.82654731345164100, 27.93780948131385600 ) ) ; +#10027 = CARTESIAN_POINT ( 'NONE', ( 12.21383511944958800, -19.70193335187874300, -24.87158506984456700 ) ) ; +#10028 = CARTESIAN_POINT ( 'NONE', ( 42.63087396392826600, 11.93493164662855900, -23.15436981963976500 ) ) ; +#10029 = CARTESIAN_POINT ( 'NONE', ( 39.33725541596852800, -29.62890865157703100, 22.73413058179503200 ) ) ; +#10030 = CIRCLE ( 'NONE', #2707, 3.189999999999994200 ) ; +#10031 = CARTESIAN_POINT ( 'NONE', ( 37.42055594107599600, -100.0000000000000300, -27.29398733170708300 ) ) ; +#10032 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10033 = CARTESIAN_POINT ( 'NONE', ( 36.14706449018820000, -30.69197738536391300, 25.66954464377511500 ) ) ; +#10034 = CARTESIAN_POINT ( 'NONE', ( 11.85993902382543300, -11.51054743549247800, 25.00000000000000000 ) ) ; +#10035 = CARTESIAN_POINT ( 'NONE', ( 36.67846230200783000, -18.01220969020785400, -23.04852156136438900 ) ) ; +#10036 = CARTESIAN_POINT ( 'NONE', ( -1.002244890959050900, -7.667251907538971300, -14.47913086914054000 ) ) ; +#10037 = CARTESIAN_POINT ( 'NONE', ( 6.463536918641470000, -30.31979565710307200, 23.69845295265610800 ) ) ; +#10038 = CARTESIAN_POINT ( 'NONE', ( 9.359207246445064900, -36.91504296463729400, 15.77007779198695500 ) ) ; +#10039 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.500000000000000000, 22.50000000000000700 ) ) ; +#10040 = CARTESIAN_POINT ( 'NONE', ( 11.44285303948074500, -30.38713817376575900, 27.13548910534421000 ) ) ; +#10041 = CARTESIAN_POINT ( 'NONE', ( 5.335910454952960800, -19.81721682247631500, 11.24418379436486900 ) ) ; +#10042 = CARTESIAN_POINT ( 'NONE', ( 44.31887656911450100, -7.583778719212916500, -20.37465999182189000 ) ) ; +#10044 = EDGE_CURVE ( 'NONE', #318, #1818, #9580, .T. ) ; +#10043 = CARTESIAN_POINT ( 'NONE', ( 32.76947904379976300, -10.39387571535393000, -25.05587703153362300 ) ) ; +#10045 = VERTEX_POINT ( 'NONE', #4234 ) ; +#10046 = CARTESIAN_POINT ( 'NONE', ( 32.25902683822707200, -30.91862817918586600, 27.58483250998484600 ) ) ; +#10047 = CARTESIAN_POINT ( 'NONE', ( 7.192862573891058100, -34.80666567216015700, 13.32749957311204800 ) ) ; +#10048 = CARTESIAN_POINT ( 'NONE', ( 37.42055594107599600, -12.49999999999999600, -11.86537651971697500 ) ) ; +#10049 = CARTESIAN_POINT ( 'NONE', ( 13.66310162828869300, -30.82599872986591200, 27.90796613348012700 ) ) ; +#10050 = CARTESIAN_POINT ( 'NONE', ( 9.768177502365361400, -30.40608699956566200, 26.32576467159784900 ) ) ; +#10051 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, -5.000000000000001800, 25.00000000000000000 ) ) ; +#10052 = CARTESIAN_POINT ( 'NONE', ( 31.69426613156719300, -93.15963138417724600, 22.01032468290763000 ) ) ; +#10053 = CARTESIAN_POINT ( 'NONE', ( 5.000006797552808600, -29.78101004062750000, 21.66506203558760300 ) ) ; +#10054 = CARTESIAN_POINT ( 'NONE', ( 37.63370088555656400, -30.74504436047208600, 24.35123046009624700 ) ) ; +#10055 = FACE_OUTER_BOUND ( 'NONE', #2687, .T. ) ; +#10056 = CARTESIAN_POINT ( 'NONE', ( 34.12531814845748100, -31.09489143319319400, 26.68581689176176800 ) ) ; +#10057 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -90.07596123493895800, -4.350951650170483900 ) ) ; +#10058 = ADVANCED_FACE ( 'NONE', ( #7033 ), #7221, .T. ) ; +#10059 = CARTESIAN_POINT ( 'NONE', ( 34.51735215397535200, -11.17986805978160400, -25.00000000000001100 ) ) ; +#10060 = CARTESIAN_POINT ( 'NONE', ( 8.190891715561329900, -29.83970657612018900, 25.22914032237274600 ) ) ; +#10061 = CARTESIAN_POINT ( 'NONE', ( 5.342021634064259700, -17.50635092592844100, -19.06447503237978600 ) ) ; +#10062 = VERTEX_POINT ( 'NONE', #9398 ) ; +#10063 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10064 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10065 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000000, 1.200000000000008400 ) ) ; +#10066 = CARTESIAN_POINT ( 'NONE', ( 38.71137036867055800, -30.70740982074515200, 22.51058047509491500 ) ) ; +#10067 = CYLINDRICAL_SURFACE ( 'NONE', #4874, 5.000000000000000000 ) ; +#10068 = CARTESIAN_POINT ( 'NONE', ( 37.18345617790463800, -100.0000000000000300, -28.51501817793796100 ) ) ; +#10069 = CARTESIAN_POINT ( 'NONE', ( 35.91936395348433600, -29.65418489781013600, 25.71381142497197900 ) ) ; +#10070 = CARTESIAN_POINT ( 'NONE', ( 34.88576150260724500, -13.36407974372234400, -25.00000000000005000 ) ) ; +#10071 = CARTESIAN_POINT ( 'NONE', ( 38.65717387410596500, -23.02193875449446700, -18.37035681260302400 ) ) ; +#10072 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.08917251752039600, 7.821153000267028900 ) ) ; +#10073 = CARTESIAN_POINT ( 'NONE', ( 3.677687288558023000, -7.755134716725889300, -25.11020462403649800 ) ) ; +#10074 = CARTESIAN_POINT ( 'NONE', ( 6.854464425186335100, -29.24597697364842500, 23.66356092490483900 ) ) ; +#10075 = CARTESIAN_POINT ( 'NONE', ( 6.704740917568758000, -31.00544597194021500, 22.72000988593244800 ) ) ; +#10076 = CARTESIAN_POINT ( 'NONE', ( 32.05502153781985400, -30.80693057799861700, 27.68278957709703600 ) ) ; +#10077 = CARTESIAN_POINT ( 'NONE', ( 10.59513810839898100, -12.29148173223318200, 24.52319425751192100 ) ) ; +#10078 = CARTESIAN_POINT ( 'NONE', ( 11.54086569044844200, -30.95925627094588600, 27.08109402454916600 ) ) ; +#10079 = AXIS2_PLACEMENT_3D ( 'NONE', #1534, #1518, #1491 ) ; +#10080 = CYLINDRICAL_SURFACE ( 'NONE', #6538, 3.189999999999995100 ) ; +#10081 = CARTESIAN_POINT ( 'NONE', ( 5.078156878325633400, -19.91147459531763900, 9.573945762004898400 ) ) ; +#10082 = CARTESIAN_POINT ( 'NONE', ( 33.54870965694777100, -10.35256082417685500, -25.00000000000311200 ) ) ; +#10083 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8170, #7852, #7822, #7777, #7758, #7734, #7716, #7688, #7646, #7633 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 5.751845275954994900E-015, 0.0009045423644360985300, 0.001809084728866445400, 0.002713627093296792300, 0.003618169457727138800 ), + .UNSPECIFIED. ) ; +#10084 = CARTESIAN_POINT ( 'NONE', ( 5.005336113953248400, -27.52383879237476800, 7.098256107181283500 ) ) ; +#10085 = CARTESIAN_POINT ( 'NONE', ( 37.18345617790463800, -12.49999999999999600, -13.08640736594785300 ) ) ; +#10086 = CARTESIAN_POINT ( 'NONE', ( 11.76849918538664300, -20.72400267706030500, -24.44503454127680800 ) ) ; +#10087 = CARTESIAN_POINT ( 'NONE', ( 13.66287925376083100, -30.81023863544916400, 27.91068027713888700 ) ) ; +#10088 = ORIENTED_EDGE ( 'NONE', *, *, #1958, .T. ) ; +#10089 = CARTESIAN_POINT ( 'NONE', ( 10.04023640470957400, -31.14771253039949500, 26.16346373764118000 ) ) ; +#10090 = ORIENTED_EDGE ( 'NONE', *, *, #5020, .F. ) ; +#10091 = CARTESIAN_POINT ( 'NONE', ( 1.732405534841928500, -8.794272443609411700, 19.39438980037816800 ) ) ; +#10092 = CARTESIAN_POINT ( 'NONE', ( 35.38953991232897100, -17.20637079067710200, -24.99999999999998900 ) ) ; +#10093 = CARTESIAN_POINT ( 'NONE', ( 27.38228815507270400, -97.51416821467064700, 21.99143611180784700 ) ) ; +#10094 = CARTESIAN_POINT ( 'NONE', ( 6.056704036254074300, -28.87961659099457600, 21.82330448824454900 ) ) ; +#10095 = FACE_OUTER_BOUND ( 'NONE', #4842, .T. ) ; +#10096 = CARTESIAN_POINT ( 'NONE', ( 37.15157789192921500, -29.40249066718497800, 24.69098087615797300 ) ) ; +#10097 = CARTESIAN_POINT ( 'NONE', ( 24.97955416301038100, -30.66267911654912500, 28.85661217803112800 ) ) ; +#10098 = ADVANCED_FACE ( 'NONE', ( #1920 ), #4805, .T. ) ; +#10099 = AXIS2_PLACEMENT_3D ( 'NONE', #2154, #2140, #2114 ) ; +#10100 = CARTESIAN_POINT ( 'NONE', ( 34.06324487798784200, -30.56617393070512600, 26.90305322285888300 ) ) ; +#10101 = CARTESIAN_POINT ( 'NONE', ( 29.76326059779476900, -28.65067750892495000, 28.69618489989206700 ) ) ; +#10102 = ORIENTED_EDGE ( 'NONE', *, *, #5882, .F. ) ; +#10103 = CARTESIAN_POINT ( 'NONE', ( 34.65279311146126400, -11.60110598709422400, -24.99999999999999600 ) ) ; +#10104 = CARTESIAN_POINT ( 'NONE', ( 8.480627718310790500, -31.10427895624236100, 24.99570082249438800 ) ) ; +#10105 = VECTOR ( 'NONE', #1440, 1000.000000000000000 ) ; +#10106 = CARTESIAN_POINT ( 'NONE', ( 10.09292272124467300, -10.00000000000000000, 25.00000000000000000 ) ) ; +#10107 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.819876446001194000, 7.952013932738708500 ) ) ; +#10108 = CARTESIAN_POINT ( 'NONE', ( 38.74309991432598100, -100.0000000000000000, 17.91936059322235400 ) ) ; +#10109 = CARTESIAN_POINT ( 'NONE', ( 38.64802396864345700, -29.29560183071123400, 23.20265217334552000 ) ) ; +#10110 = CARTESIAN_POINT ( 'NONE', ( 37.08415707349907800, -100.0000000000000300, -28.92069478362983000 ) ) ; +#10111 = VERTEX_POINT ( 'NONE', #5534 ) ; +#10112 = CARTESIAN_POINT ( 'NONE', ( 36.07733025150391600, -30.48307617551827400, 25.79821227342643300 ) ) ; +#10113 = EDGE_CURVE ( 'NONE', #6647, #10448, #7361, .T. ) ; +#10114 = CARTESIAN_POINT ( 'NONE', ( 24.99272530894469200, -27.99000931841082000, 27.51040726472855300 ) ) ; +#10115 = CARTESIAN_POINT ( 'NONE', ( 39.24200714772145200, -20.26414445338386700, -16.41100439574407600 ) ) ; +#10116 = EDGE_CURVE ( 'NONE', #5178, #4073, #2447, .T. ) ; +#10117 = ORIENTED_EDGE ( 'NONE', *, *, #11768, .F. ) ; +#10118 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000259300, -94.82601771544357000, 5.941839880699499900 ) ) ; +#10119 = CARTESIAN_POINT ( 'NONE', ( 12.14880195018302800, -9.999999999999996400, -30.26223456583071300 ) ) ; +#10120 = CARTESIAN_POINT ( 'NONE', ( 6.785082591605514900, -30.72244763991577100, 23.59017158242804200 ) ) ; +#10121 = CARTESIAN_POINT ( 'NONE', ( 9.415475261047005200, -32.06305842516827200, 25.36675889730102500 ) ) ; +#10122 = CARTESIAN_POINT ( 'NONE', ( 31.74855291424811600, -30.72479796191795700, 27.79642993635551900 ) ) ; +#10123 = CARTESIAN_POINT ( 'NONE', ( 11.53109457204475400, -30.57298912261659800, 27.17156609287875200 ) ) ; +#10124 = ORIENTED_EDGE ( 'NONE', *, *, #11473, .T. ) ; +#10125 = DIRECTION ( 'NONE', ( -3.551631410960778700E-016, -3.469446951953615200E-016, 1.000000000000000000 ) ) ; +#10126 = CARTESIAN_POINT ( 'NONE', ( 9.146298617206492000, -12.49999999999999300, -16.53846171907854400 ) ) ; +#10127 = VERTEX_POINT ( 'NONE', #11674 ) ; +#10128 = ORIENTED_EDGE ( 'NONE', *, *, #4078, .T. ) ; +#10129 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999996400, -97.53409883939578200, 14.05316308284049700 ) ) ; +#10130 = CARTESIAN_POINT ( 'NONE', ( 1.348051523028817500, -8.444298515645765900, 17.39883151789532400 ) ) ; +#10131 = CARTESIAN_POINT ( 'NONE', ( 11.04851164026635700, -18.03145835856587800, -25.46095936387078500 ) ) ; +#10132 = VERTEX_POINT ( 'NONE', #4532 ) ; +#10133 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344970100, 27.93780948130441300 ) ) ; +#10134 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10135 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11205, #9266, #6215, #162, #7270, #1172, #8303, #2172, #9307, #3187, #10318, #4196, #11340, #5223, #12317, #6257 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( -1.683180872070381300E-005, 0.001584905107167871700, 0.002385773565112160900, 0.003186642023056450800, 0.003987510481000740600, 0.004788378938945029600, 0.005589247396889319500, 0.006390115854833608400 ), + .UNSPECIFIED. ) ; +#10136 = DIRECTION ( 'NONE', ( -0.9998119252976104300, -0.01909902633348555700, -0.003367673647854818700 ) ) ; +#10137 = CARTESIAN_POINT ( 'NONE', ( 9.956105174324836300, -30.58348367595515400, 26.40836378544959100 ) ) ; +#10138 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10139 = CARTESIAN_POINT ( 'NONE', ( 37.51693116901496700, -8.844345346974549200, -24.99999999999997500 ) ) ; +#10140 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000900, 16.30000000000000100 ) ) ; +#10141 = ORIENTED_EDGE ( 'NONE', *, *, #3658, .T. ) ; +#10142 = CARTESIAN_POINT ( 'NONE', ( 5.232421353374442100, -30.13631103532722100, 21.66565634461705500 ) ) ; +#10143 = CARTESIAN_POINT ( 'NONE', ( 37.44839962646953100, -30.44440123767710600, 24.82042367353933100 ) ) ; +#10144 = VERTEX_POINT ( 'NONE', #8645 ) ; +#10145 = CARTESIAN_POINT ( 'NONE', ( 24.85960558233109600, -33.35446909076586100, 26.50697697917620500 ) ) ; +#10146 = EDGE_CURVE ( 'NONE', #1847, #4951, #3957, .T. ) ; +#10147 = CARTESIAN_POINT ( 'NONE', ( 34.03461922702913300, -31.05677244895370100, 26.75505242516259200 ) ) ; +#10148 = CARTESIAN_POINT ( 'NONE', ( 31.82865555074469200, -20.25876296596762300, 21.55077192929316600 ) ) ; +#10149 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #398, #3469 ) ; +#10150 = CARTESIAN_POINT ( 'NONE', ( 34.70443398989223700, -11.81691134908219200, -24.99999999999999300 ) ) ; +#10151 = ORIENTED_EDGE ( 'NONE', *, *, #11548, .T. ) ; +#10152 = CARTESIAN_POINT ( 'NONE', ( 8.288676057079191800, -30.22655142281064000, 25.39424651789378700 ) ) ; +#10153 = ORIENTED_EDGE ( 'NONE', *, *, #8491, .T. ) ; +#10154 = CARTESIAN_POINT ( 'NONE', ( 9.714444887751108500, -10.64040635008093200, 24.88707908186371800 ) ) ; +#10155 = CARTESIAN_POINT ( 'NONE', ( 0.5279396938023585000, -11.05580488200747700, 8.020188465657289700 ) ) ; +#10156 = CARTESIAN_POINT ( 'NONE', ( 44.47229664483350600, -11.05556445525992400, -11.57097027808854700 ) ) ; +#10157 = CARTESIAN_POINT ( 'NONE', ( 39.01815434072975800, -30.51278585580877600, 21.40237151576240000 ) ) ; +#10158 = ORIENTED_EDGE ( 'NONE', *, *, #4994, .F. ) ; +#10159 = CARTESIAN_POINT ( 'NONE', ( 38.85253622768551200, -30.44342071968584700, 23.04107584802857300 ) ) ; +#10160 = CARTESIAN_POINT ( 'NONE', ( 37.08415707349907800, -12.49999999999999600, -13.49208397163972300 ) ) ; +#10161 = AXIS2_PLACEMENT_3D ( 'NONE', #3523, #3346, #3306 ) ; +#10162 = CARTESIAN_POINT ( 'NONE', ( 35.91895676357844300, -31.16855199113759800, 25.44620054651734300 ) ) ; +#10163 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -22.23290464533095400, -11.77831754686243600 ) ) ; +#10164 = CARTESIAN_POINT ( 'NONE', ( 40.97836297352245100, -17.91961360893367300, -13.39236001320363600 ) ) ; +#10165 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3650, #4613, #4655 ), + ( #11789, #5703, #12751 ), + ( #6740, #667, #7781 ), + ( #1668, #8805, #2673 ), + ( #9805, #3685, #10816 ), + ( #4705, #11831, #5743 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001306533526234679400, 0.002613067052469358900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9613603877058486400, 1.000000000000000000), + ( 1.000000000000000000, 0.9615636312518810500, 1.000000000000000000), + ( 1.000000000000000000, 0.9618920682152490900, 1.000000000000000000), + ( 1.000000000000000000, 0.9629233739143668900, 1.000000000000000000), + ( 1.000000000000000000, 0.9636353495069373000, 1.000000000000000000), + ( 1.000000000000000000, 0.9645529253283149400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#10166 = EDGE_CURVE ( 'NONE', #9344, #8284, #12072, .T. ) ; +#10167 = ORIENTED_EDGE ( 'NONE', *, *, #8873, .T. ) ; +#10168 = CARTESIAN_POINT ( 'NONE', ( 39.59703781758401000, -92.41467508776946700, 1.255243565480092400 ) ) ; +#10169 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4727, #12770, #9872, #3744, #10876, #4773 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.002048126324018656500, 0.006128754622308075000, 0.01020938292059749700 ), + .UNSPECIFIED. ) ; +#10170 = CARTESIAN_POINT ( 'NONE', ( 21.17688643591768700, -20.86556439143651400, -26.86893884239116700 ) ) ; +#10171 = ADVANCED_FACE ( 'NONE', ( #4285 ), #6374, .F. ) ; +#10172 = CIRCLE ( 'NONE', #12636, 2.499999999999997800 ) ; +#10173 = CARTESIAN_POINT ( 'NONE', ( 6.639049481764068600, -29.66899370868878400, 23.87069590281526000 ) ) ; +#10174 = CARTESIAN_POINT ( 'NONE', ( 12.95513779289765600, -31.59160329851201600, 19.44972132372927100 ) ) ; +#10175 = CARTESIAN_POINT ( 'NONE', ( 31.74729178544899400, -30.79658692683867800, 27.78590352716329900 ) ) ; +#10176 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -31.29513776008465000, 28.74509265499354200 ) ) ; +#10177 = CARTESIAN_POINT ( 'NONE', ( 11.74376633295479500, -31.01862076258794000, 27.14760854753930300 ) ) ; +#10178 = CARTESIAN_POINT ( 'NONE', ( 29.04932301350859800, -100.0000000000000100, -37.69022306636186700 ) ) ; +#10179 = CARTESIAN_POINT ( 'NONE', ( 17.14068130240991600, -12.49999999999999300, -22.61028725662767500 ) ) ; +#10180 = CARTESIAN_POINT ( 'NONE', ( 36.84930629797813900, -100.0000000000000300, -29.71313003999629400 ) ) ; +#10181 = CARTESIAN_POINT ( 'NONE', ( 12.49245721242280500, -23.71857929469356600, -25.42537836370075500 ) ) ; +#10182 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344969800, 27.93780948130441300 ) ) ; +#10183 = CARTESIAN_POINT ( 'NONE', ( 40.68269311490456600, -18.63461377019078600, -10.19815023353005600 ) ) ; +#10184 = AXIS2_PLACEMENT_3D ( 'NONE', #3567, #3599, #3552 ) ; +#10185 = CARTESIAN_POINT ( 'NONE', ( 44.90287534330132500, 10.19006527892301500, -0.3593456658651215700 ) ) ; +#10186 = CYLINDRICAL_SURFACE ( 'NONE', #1381, 2.500000000000002200 ) ; +#10187 = CARTESIAN_POINT ( 'NONE', ( 10.04000961171204100, -29.91893908329488000, 26.38052888002914300 ) ) ; +#10188 = CARTESIAN_POINT ( 'NONE', ( 37.08955302715500600, -12.50000000000001100, 12.58980272275513500 ) ) ; +#10189 = ORIENTED_EDGE ( 'NONE', *, *, #6843, .F. ) ; +#10190 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122091300, -0.1736481776669239500 ) ) ; +#10191 = CARTESIAN_POINT ( 'NONE', ( 43.18537684010079400, -9.647633476897532000, 16.89545867727950000 ) ) ; +#10192 = CARTESIAN_POINT ( 'NONE', ( 5.798022936893207900, -28.99961154074618000, 21.86512873667834700 ) ) ; +#10193 = CARTESIAN_POINT ( 'NONE', ( 36.96154370194663800, -29.37412193876773300, 24.81147326276743900 ) ) ; +#10194 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#10195 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -2.499999999999999100, -24.99999999999999600 ) ) ; +#10196 = CARTESIAN_POINT ( 'NONE', ( 33.85760135403949500, -30.41340598434179700, 27.00436321711487500 ) ) ; +#10197 = CARTESIAN_POINT ( 'NONE', ( 33.16509367228658100, -27.10662605393182300, 19.57976620880080200 ) ) ; +#10198 = LINE ( 'NONE', #6589, #11918 ) ; +#10199 = CARTESIAN_POINT ( 'NONE', ( 34.82718585113791900, -12.47470396466191600, -25.00000000000000700 ) ) ; +#10200 = CARTESIAN_POINT ( 'NONE', ( 8.750595172228736700, -31.16377714229361500, 25.16699513661371100 ) ) ; +#10201 = CARTESIAN_POINT ( 'NONE', ( 44.96233075391947400, -7.627153066785846000, -18.77522856075125900 ) ) ; +#10202 = CARTESIAN_POINT ( 'NONE', ( -4.292652046027517200E-014, -9.998234773404744800, 8.216953436124574800 ) ) ; +#10203 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999869300, -9.993902375261567900, -11.90009610596774800 ) ) ; +#10204 = CARTESIAN_POINT ( 'NONE', ( 35.95902902500728300, -29.92386529299863800, 26.11965376221087000 ) ) ; +#10205 = EDGE_CURVE ( 'NONE', #2981, #3266, #138, .T. ) ; +#10206 = CARTESIAN_POINT ( 'NONE', ( 38.22902868553084900, -29.08888113736115200, 23.35591676040595400 ) ) ; +#10207 = CARTESIAN_POINT ( 'NONE', ( 36.84930629797813900, -12.49999999999999600, -14.28451922800618900 ) ) ; +#10208 = CARTESIAN_POINT ( 'NONE', ( 35.88701700082375400, -30.31501839472029000, 25.93848913292315600 ) ) ; +#10209 = CARTESIAN_POINT ( 'NONE', ( 39.99851715551042700, -22.34405176619470300, -11.71934981261587100 ) ) ; +#10210 = EDGE_LOOP ( 'NONE', ( #10748, #10787, #10880, #10952 ) ) ; +#10211 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000000, -14.31000000000000400 ) ) ; +#10212 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9606, #10615, #508, #7615, #1501, #8644, #2503, #9646, #3519, #10653, #4531, #11673, #5576, #12642, #6612, #545 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 1, 2, 2, 1, 2, 2, 4 ), + ( 0.1951557583586938600, 0.2957612885638568100, 0.3963668187690198000, 0.4969723489741827400, 0.5472751140767642100, 0.5975778791793460200, 0.6981834093845094000, 0.7987889395896730100, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#10213 = CARTESIAN_POINT ( 'NONE', ( 5.844071876791497600, -20.29327946528291100, -16.72853445784764400 ) ) ; +#10214 = CARTESIAN_POINT ( 'NONE', ( 7.159066103700075300, -30.98051622986546100, 23.55954096768132500 ) ) ; +#10215 = CARTESIAN_POINT ( 'NONE', ( 12.15456075702280500, -38.24630951876336100, 17.78032805003578800 ) ) ; +#10216 = CARTESIAN_POINT ( 'NONE', ( 31.74854979856537400, -30.87370227938953300, 27.77018016218327300 ) ) ; +#10217 = CARTESIAN_POINT ( 'NONE', ( 0.6269346401775175400, -7.437627433454236900, 17.81746456844153000 ) ) ; +#10218 = CARTESIAN_POINT ( 'NONE', ( 11.72826681799694800, -30.69024508729056000, 27.24151508482493600 ) ) ; +#10219 = CARTESIAN_POINT ( 'NONE', ( 36.57776193200572100, -100.0000000000000100, -30.49003117266016700 ) ) ; +#10220 = CARTESIAN_POINT ( 'NONE', ( 33.67257049480777200, -13.06585596906749000, 24.45940687368732500 ) ) ; +#10221 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#10222 = CARTESIAN_POINT ( 'NONE', ( 36.57776193200572100, -100.0000000000000300, -30.49003117266017100 ) ) ; +#10223 = CARTESIAN_POINT ( 'NONE', ( 12.71073016634094400, -20.75789888410281100, -25.02797737036606300 ) ) ; +#10224 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, -19.48143887112369700 ) ) ; +#10225 = CARTESIAN_POINT ( 'NONE', ( 9.846725152373764400, -12.35969390826398700, 24.02596937418355000 ) ) ; +#10226 = EDGE_CURVE ( 'NONE', #2214, #11214, #10940, .T. ) ; +#10227 = AXIS2_PLACEMENT_3D ( 'NONE', #4639, #11777, #5685 ) ; +#10228 = CARTESIAN_POINT ( 'NONE', ( 10.35310189868156900, -30.77117687626589100, 26.56523933901666000 ) ) ; +#10229 = VECTOR ( 'NONE', #2318, 1000.000000000000000 ) ; +#10230 = CARTESIAN_POINT ( 'NONE', ( 34.96242584221889200, -100.0000000000000300, 1.600059941120302500 ) ) ; +#10231 = CARTESIAN_POINT ( 'NONE', ( 1.925118769999737000, -9.016479629940038300, -21.32874197814702200 ) ) ; +#10232 = CARTESIAN_POINT ( 'NONE', ( 42.20816823025052900, -9.589147637859847300, 18.80277835313004400 ) ) ; +#10233 = CARTESIAN_POINT ( 'NONE', ( 5.828412736145783600, -30.49261268996692600, 21.71808680179727000 ) ) ; +#10234 = CARTESIAN_POINT ( 'NONE', ( 2.102446177947324900, 11.02497441041343700, -24.48776911026339000 ) ) ; +#10235 = AXIS2_PLACEMENT_3D ( 'NONE', #2294, #9439, #3319 ) ; +#10236 = CARTESIAN_POINT ( 'NONE', ( 37.27557652796422600, -30.22644292212156700, 25.00830666577579800 ) ) ; +#10237 = CARTESIAN_POINT ( 'NONE', ( 5.026735565964374400, -27.83121797770736400, 11.77490938528367100 ) ) ; +#10238 = ADVANCED_FACE ( 'NONE', ( #9426 ), #986, .T. ) ; +#10239 = CARTESIAN_POINT ( 'NONE', ( 33.85760111210898800, -30.89549417669875800, 26.91936288716342700 ) ) ; +#10240 = CARTESIAN_POINT ( 'NONE', ( 38.63599312091538700, -28.87841121485309500, 22.48717408494193400 ) ) ; +#10241 = VECTOR ( 'NONE', #8413, 1000.000000000000000 ) ; +#10242 = CARTESIAN_POINT ( 'NONE', ( 8.559143898851111500, -30.47805128341030900, 25.54767848719339800 ) ) ; +#10243 = CARTESIAN_POINT ( 'NONE', ( 23.34038460148475400, -7.495227713303666700, -32.90940790145558700 ) ) ; +#10244 = CARTESIAN_POINT ( 'NONE', ( 2.602085213965210600E-015, -8.765021387393261400, 8.905008754148530800 ) ) ; +#10245 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999996400, -8.701991563595068900, -12.98064519390475800 ) ) ; +#10246 = CARTESIAN_POINT ( 'NONE', ( 31.84138593514744600, -32.65804594249878100, 27.47357358307044000 ) ) ; +#10247 = EDGE_CURVE ( 'NONE', #3113, #7948, #11775, .T. ) ; +#10248 = CARTESIAN_POINT ( 'NONE', ( 38.84965492688174700, -30.13205933778353800, 23.39258288169963500 ) ) ; +#10249 = CARTESIAN_POINT ( 'NONE', ( 1.101950614123080400, -8.135035407091789800, 18.32941959488781300 ) ) ; +#10250 = CARTESIAN_POINT ( 'NONE', ( 35.78877232130671600, -31.05964337579616700, 25.65982791911616100 ) ) ; +#10251 = CARTESIAN_POINT ( 'NONE', ( 11.34102200822474100, -11.17641130159874200, -25.06081581640923500 ) ) ; +#10252 = CARTESIAN_POINT ( 'NONE', ( 40.00515022385847900, -19.99142165964331100, -11.57125835183820000 ) ) ; +#10253 = CARTESIAN_POINT ( 'NONE', ( 34.88576150260724500, -13.36407974372234400, -25.00000000000005000 ) ) ; +#10254 = CARTESIAN_POINT ( 'NONE', ( 34.49407894617468900, -16.63655602679613900, -24.80432773142117100 ) ) ; +#10255 = CARTESIAN_POINT ( 'NONE', ( 6.694702061885736900, -30.05408473909694700, 24.09321860333275500 ) ) ; +#10256 = CARTESIAN_POINT ( 'NONE', ( 10.55164135966645100, -32.35799559910000100, 26.08288648906924600 ) ) ; +#10257 = CARTESIAN_POINT ( 'NONE', ( 31.64477743274314000, -30.78579747783745900, 27.82041171443603400 ) ) ; +#10258 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -5.000000000024203800, 16.06938735382136600 ) ) ; +#10259 = CARTESIAN_POINT ( 'NONE', ( 11.74380894029439700, -30.37529722896989200, 27.26094775849392300 ) ) ; +#10260 = ORIENTED_EDGE ( 'NONE', *, *, #2470, .F. ) ; +#10261 = EDGE_LOOP ( 'NONE', ( #2972, #3130, #3437, #3463 ) ) ; +#10262 = CARTESIAN_POINT ( 'NONE', ( 30.10601841925401000, -16.86367486153301700, 23.78974893510134000 ) ) ; +#10263 = FACE_OUTER_BOUND ( 'NONE', #11607, .T. ) ; +#10264 = APPROVAL_ROLE ( '' ) ; +#10265 = CARTESIAN_POINT ( 'NONE', ( 36.57776193200572100, -12.49999999999999600, -15.06142036067006600 ) ) ; +#10266 = CARTESIAN_POINT ( 'NONE', ( 12.06607516225247200, -18.03621919750980500, -26.10352076307225700 ) ) ; +#10267 = DIRECTION ( 'NONE', ( -0.5968658131681624500, -0.5102168038985855900, -0.6192172591995642700 ) ) ; +#10268 = CARTESIAN_POINT ( 'NONE', ( 3.668354790844059500, -11.30777154370632700, 18.49936770963242700 ) ) ; +#10269 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669238900, -0.9848077530122091300 ) ) ; +#10270 = CARTESIAN_POINT ( 'NONE', ( 10.38341041431131700, -30.15129829315936800, 26.61728546894281800 ) ) ; +#10271 = CARTESIAN_POINT ( 'NONE', ( 30.57931111076171900, -12.50000000000001100, 20.72827765437655100 ) ) ; +#10272 = CARTESIAN_POINT ( 'NONE', ( 41.97709405442658000, -9.594206958099393400, 21.99780590795879900 ) ) ; +#10273 = ORIENTED_EDGE ( 'NONE', *, *, #1958, .F. ) ; +#10274 = CARTESIAN_POINT ( 'NONE', ( 5.261851812612571100, -29.34530319484438400, 21.91503499771978300 ) ) ; +#10275 = CARTESIAN_POINT ( 'NONE', ( 1.326932184891737900, 11.80207714697437600, -23.67306781510853100 ) ) ; +#10276 = CARTESIAN_POINT ( 'NONE', ( 36.97478172647851800, -31.10273120734890300, 24.52167759835830900 ) ) ; +#10277 = ORIENTED_EDGE ( 'NONE', *, *, #125, .T. ) ; +#10278 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#10279 = CARTESIAN_POINT ( 'NONE', ( 11.28085959494733400, -17.76862864278084300, -24.96274257127417700 ) ) ; +#10280 = EDGE_CURVE ( 'NONE', #6296, #5523, #8618, .T. ) ; +#10281 = CARTESIAN_POINT ( 'NONE', ( 33.74592985113903200, -30.27890259822567400, 27.04489119898591200 ) ) ; +#10282 = CARTESIAN_POINT ( 'NONE', ( 37.54976203754280600, -21.88276223689921500, 16.02680115675222100 ) ) ; +#10283 = ORIENTED_EDGE ( 'NONE', *, *, #12997, .F. ) ; +#10284 = VERTEX_POINT ( 'NONE', #11837 ) ; +#10285 = CARTESIAN_POINT ( 'NONE', ( 8.741804789299425900, -29.58465934853625300, 25.45750742473770600 ) ) ; +#10286 = CARTESIAN_POINT ( 'NONE', ( 33.26876881120757900, -7.702217768147581200, -31.22838172799836800 ) ) ; +#10287 = CARTESIAN_POINT ( 'NONE', ( 0.6636537490768644700, -10.24345313534146300, 12.69700441341576400 ) ) ; +#10288 = CARTESIAN_POINT ( 'NONE', ( 44.35581291185324900, -10.04472282720440300, -16.57291843165149100 ) ) ; +#10289 = CARTESIAN_POINT ( 'NONE', ( 26.33601048566797300, -33.30903614688060800, 26.48081136125241000 ) ) ; +#10290 = EDGE_LOOP ( 'NONE', ( #5862, #2839, #6522, #4262 ) ) ; +#10291 = CARTESIAN_POINT ( 'NONE', ( 38.20576612473110600, -30.90792144509704200, 23.02591237682563000 ) ) ; +#10292 = EDGE_LOOP ( 'NONE', ( #5787, #6596, #6920, #7895 ) ) ; +#10293 = CARTESIAN_POINT ( 'NONE', ( 35.73963209372698900, -29.99990115488493800, 25.97035585590496300 ) ) ; +#10294 = ORIENTED_EDGE ( 'NONE', *, *, #7104, .T. ) ; +#10295 = AXIS2_PLACEMENT_3D ( 'NONE', #5477, #5343, #5325 ) ; +#10296 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10297 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -12.49999999999999300, 9.327783369942690000 ) ) ; +#10298 = CARTESIAN_POINT ( 'NONE', ( 34.67416803595374100, -19.92673644924943200, -24.01794711940631200 ) ) ; +#10299 = ADVANCED_FACE ( 'NONE', ( #1302 ), #3343, .F. ) ; +#10300 = CARTESIAN_POINT ( 'NONE', ( 7.179037555124990500, -29.16094487572447100, 23.86437325109692200 ) ) ; +#10301 = CARTESIAN_POINT ( 'NONE', ( 13.77945100751985500, -31.68901400624406200, 19.83727737291040700 ) ) ; +#10302 = CARTESIAN_POINT ( 'NONE', ( 31.64545315978523000, -30.85150538269959600, 27.80811504216606500 ) ) ; +#10303 = CARTESIAN_POINT ( 'NONE', ( 37.32559048522207200, -8.754117843982568200, 25.00000000000000700 ) ) ; +#10304 = CARTESIAN_POINT ( 'NONE', ( 11.82906572547165800, -30.77135446604533100, 27.26751174425341900 ) ) ; +#10305 = CARTESIAN_POINT ( 'NONE', ( 27.72400544033997200, -18.47099043411499500, 23.50633583314228000 ) ) ; +#10306 = CARTESIAN_POINT ( 'NONE', ( 38.94305882172743300, -28.87958823934991400, 21.82368022098569300 ) ) ; +#10307 = ORIENTED_EDGE ( 'NONE', *, *, #10973, .T. ) ; +#10308 = CARTESIAN_POINT ( 'NONE', ( 1.004577479243666400, -8.010744466613504100, 18.20296685487732800 ) ) ; +#10309 = CARTESIAN_POINT ( 'NONE', ( 14.04659701961311000, -23.79285467735726200, -26.19317086743673800 ) ) ; +#10310 = VERTEX_POINT ( 'NONE', #3730 ) ; +#10311 = ADVANCED_FACE ( 'NONE', ( #8790 ), #6211, .F. ) ; +#10312 = CARTESIAN_POINT ( 'NONE', ( 44.46556482654843700, -11.03803180958691300, 8.803575590169918600 ) ) ; +#10313 = CARTESIAN_POINT ( 'NONE', ( 39.53967402349233100, -99.99999999999998600, 17.45579128332461500 ) ) ; +#10314 = CARTESIAN_POINT ( 'NONE', ( 34.51735214872812900, -11.17986806147689000, -25.00000000000000000 ) ) ; +#10315 = CARTESIAN_POINT ( 'NONE', ( 14.34657918575581800, -31.29892962639993600, 28.02480531093845100 ) ) ; +#10316 = CARTESIAN_POINT ( 'NONE', ( 10.57295938682114800, -31.00476853473655200, 26.57498546087632700 ) ) ; +#10317 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000009200, -100.0000000000000300, 6.630571736238754200 ) ) ; +#10318 = CARTESIAN_POINT ( 'NONE', ( 39.90392660770860500, -11.21387249256645200, -23.80889710791157300 ) ) ; +#10319 = CARTESIAN_POINT ( 'NONE', ( 36.94673439212822800, -12.65690218456427700, 22.48671392899213800 ) ) ; +#10320 = CARTESIAN_POINT ( 'NONE', ( 6.117910609833243600, -30.62029928013823000, 21.75503866587416400 ) ) ; +#10321 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000002100, -12.50000000000001200, 10.16042836535422500 ) ) ; +#10322 = CARTESIAN_POINT ( 'NONE', ( 36.85212704277986300, -29.98257656890066900, 25.25611651229979100 ) ) ; +#10323 = ORIENTED_EDGE ( 'NONE', *, *, #6561, .T. ) ; +#10324 = CARTESIAN_POINT ( 'NONE', ( 38.92420708896032300, -28.86076807073644100, 21.75925883944423900 ) ) ; +#10325 = PERSON_AND_ORGANIZATION ( #10194, #1109 ) ; +#10326 = EDGE_CURVE ( 'NONE', #11004, #2501, #670, .T. ) ; +#10327 = ORIENTED_EDGE ( 'NONE', *, *, #6972, .T. ) ; +#10328 = CARTESIAN_POINT ( 'NONE', ( 33.76767176103697200, -30.73219571662267300, 27.01341836002065500 ) ) ; +#10329 = CARTESIAN_POINT ( 'NONE', ( 38.59898339640739100, -26.10231213340394900, 13.55104422139316600 ) ) ; +#10330 = CARTESIAN_POINT ( 'NONE', ( 0.9084284741186533500, -8.452784834686101000, 16.38149653183683800 ) ) ; +#10331 = CARTESIAN_POINT ( 'NONE', ( 8.685351887829678900, -30.74018670842517100, 25.51719029885678600 ) ) ; +#10332 = CARTESIAN_POINT ( 'NONE', ( 7.737562743928043200, -95.07596123493894400, 11.74817948057322400 ) ) ; +#10333 = CARTESIAN_POINT ( 'NONE', ( 40.49803999293396100, -9.999999999999996400, -24.44416439029042800 ) ) ; +#10334 = CARTESIAN_POINT ( 'NONE', ( -2.845072580790662500E-012, -7.224234110057586200, 15.92576046647484800 ) ) ; +#10335 = VERTEX_POINT ( 'NONE', #2724 ) ; +#10336 = CARTESIAN_POINT ( 'NONE', ( 44.99999999938042100, -6.671130383039642500, -19.92579671657742700 ) ) ; +#10337 = CARTESIAN_POINT ( 'NONE', ( 34.96779545965576100, -20.32149963875679400, -23.67186603788615800 ) ) ; +#10338 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3173, #11803, #6982 ), + ( #6930, #6888, #6848 ), + ( #6799, #6753, #6712 ), + ( #6534, #6491, #6445 ), + ( #6401, #6383, #6309 ), + ( #6261, #6243, #6200 ), + ( #6155, #6065, #6019 ), + ( #5971, #5927, #5843 ), + ( #5799, #5758, #5719 ), + ( #12804, #12724, #5673 ), + ( #5623, #5581, #5542 ), + ( #5414, #5366, #5348 ), + ( #5315, #5297, #5267 ), + ( #5250, #5208, #5078 ), + ( #5033, #4983, #4899 ), + ( #4853, #4808, #4626 ), + ( #4584, #4493, #4369 ), + ( #4325, #4313, #4287 ), + ( #4271, #4242, #4224 ), + ( #4140, #4091, #4040 ), + ( #3995, #3953, #3911 ), + ( #3866, #3696, #3661 ), + ( #3570, #3403, #3366 ), + ( #3528, #3488, #3278 ), + ( #3325, #3311, #3259 ), + ( #3230, #3215, #3125 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -5.453629539270385600E-005, -1.860482993865678000E-005, -6.390972116332440500E-007, 1.732663551539029200E-005, 8.918956642348444000E-005, 0.0002329154282396727400, 0.0005203671518720493200, 0.001095270599136802400, 0.002245077493666308600, 0.003394884388195814800, 0.004544691282725321500, 0.006844305071784333900, 0.009143918860843347100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9732600080694973100, 1.000000000000000000), + ( 1.000000000000000000, 0.9732574877885517000, 1.000000000000000000), + ( 1.000000000000000000, 0.9732549669622667700, 1.000000000000000000), + ( 1.000000000000000000, 0.9732511849043458100, 1.000000000000000000), + ( 1.000000000000000000, 0.9732500160338487500, 1.000000000000000000), + ( 1.000000000000000000, 0.9732473102123654400, 1.000000000000000000), + ( 1.000000000000000000, 0.9732451030845338200, 1.000000000000000000), + ( 1.000000000000000000, 0.9732356710570528900, 1.000000000000000000), + ( 1.000000000000000000, 0.9732272886056505500, 1.000000000000000000), + ( 1.000000000000000000, 0.9731996536511754400, 1.000000000000000000), + ( 1.000000000000000000, 0.9731779135860125800, 1.000000000000000000), + ( 1.000000000000000000, 0.9731029245129261300, 1.000000000000000000), + ( 1.000000000000000000, 0.9730399074028507300, 1.000000000000000000), + ( 1.000000000000000000, 0.9728132064553115500, 1.000000000000000000), + ( 1.000000000000000000, 0.9726118864953180500, 1.000000000000000000), + ( 1.000000000000000000, 0.9718682868739507700, 1.000000000000000000), + ( 1.000000000000000000, 0.9711865815397328100, 1.000000000000000000), + ( 1.000000000000000000, 0.9695042817658213700, 1.000000000000000000), + ( 1.000000000000000000, 0.9684958153049652000, 1.000000000000000000), + ( 1.000000000000000000, 0.9662482906439966400, 1.000000000000000000), + ( 1.000000000000000000, 0.9650210260274224600, 1.000000000000000000), + ( 1.000000000000000000, 0.9611177039607830000, 1.000000000000000000), + ( 1.000000000000000000, 0.9582248046236421200, 1.000000000000000000), + ( 1.000000000000000000, 0.9521433648748041100, 1.000000000000000000), + ( 1.000000000000000000, 0.9489497426018586000, 1.000000000000000000), + ( 1.000000000000000000, 0.9458302609673415700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#10339 = CARTESIAN_POINT ( 'NONE', ( 38.55084393125186900, -29.89825611638267200, 23.78106629916148400 ) ) ; +#10340 = VECTOR ( 'NONE', #4664, 1000.000000000000000 ) ; +#10341 = ORIENTED_EDGE ( 'NONE', *, *, #12375, .T. ) ; +#10342 = AXIS2_PLACEMENT_3D ( 'NONE', #2356, #2327, #2310 ) ; +#10343 = CARTESIAN_POINT ( 'NONE', ( 35.77605865938115000, -30.76786493855325200, 25.89028673669382000 ) ) ; +#10344 = CARTESIAN_POINT ( 'NONE', ( 27.18892185018930300, -95.07596123493894400, 16.84678238284962900 ) ) ; +#10345 = CARTESIAN_POINT ( 'NONE', ( 37.42055789119636000, -12.50000000000001200, 10.98370717395451700 ) ) ; +#10346 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -95.07596123493894400, 15.95758058754439400 ) ) ; +#10347 = CARTESIAN_POINT ( 'NONE', ( 6.794152704464796200, -30.33713631413223400, 24.12907738991819400 ) ) ; +#10348 = CARTESIAN_POINT ( 'NONE', ( 13.04360763156152600, -38.52588166476790800, 18.24312058641589500 ) ) ; +#10349 = CARTESIAN_POINT ( 'NONE', ( 31.43991587610434700, -30.79329487098946700, 27.88263830104195800 ) ) ; +#10350 = CARTESIAN_POINT ( 'NONE', ( 42.77415698299193300, -10.17152340764695100, -20.66610039425481600 ) ) ; +#10351 = CARTESIAN_POINT ( 'NONE', ( 11.83828739049542400, -30.45186900194917700, 27.30204854867358900 ) ) ; +#10352 = FACE_OUTER_BOUND ( 'NONE', #4673, .T. ) ; +#10353 = CARTESIAN_POINT ( 'NONE', ( 40.00000713534474500, -29.78100410130029700, 21.66544820654974800 ) ) ; +#10354 = CARTESIAN_POINT ( 'NONE', ( 36.23394150420018900, -100.0000000000000300, -31.23633444691233100 ) ) ; +#10355 = CARTESIAN_POINT ( 'NONE', ( 14.23107258927190900, -20.79970281665092500, -25.74564349781346100 ) ) ; +#10356 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.57596123371020300, 12.92977595461369400 ) ) ; +#10357 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122092400, -0.1736481776669239200 ) ) ; +#10358 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -19.87270537885227400, 23.25917566912282200 ) ) ; +#10359 = CARTESIAN_POINT ( 'NONE', ( 10.54784370494827400, -30.43608754050139400, 26.72504070310293400 ) ) ; +#10360 = CARTESIAN_POINT ( 'NONE', ( 29.34752224758852900, -28.08124121815427900, 26.96588792517640000 ) ) ; +#10361 = CARTESIAN_POINT ( 'NONE', ( 0.8450799996949929200, -7.781481582010830100, -21.43596316075076300 ) ) ; +#10362 = CARTESIAN_POINT ( 'NONE', ( 36.88619145251091400, -9.473845985627473700, 24.70499555890500100 ) ) ; +#10363 = CYLINDRICAL_SURFACE ( 'NONE', #9360, 1.200000000000005700 ) ; +#10364 = CARTESIAN_POINT ( 'NONE', ( 5.056534726326821000, -29.70133580073216400, 21.90578711454873300 ) ) ; +#10365 = CARTESIAN_POINT ( 'NONE', ( 11.15343139834820400, -32.49306459112579400, 26.40884949339341500 ) ) ; +#10366 = CARTESIAN_POINT ( 'NONE', ( 37.18346837785836800, -12.50000000000001400, 12.20472192631061700 ) ) ; +#10367 = CARTESIAN_POINT ( 'NONE', ( 36.78362167365359900, -30.88896171265861700, 25.01359952680058300 ) ) ; +#10368 = ORIENTED_EDGE ( 'NONE', *, *, #206, .T. ) ; +#10369 = CARTESIAN_POINT ( 'NONE', ( 18.34818654855864800, -100.0000000000000100, 6.546591031478615500 ) ) ; +#10370 = CARTESIAN_POINT ( 'NONE', ( 29.11283432478825300, -19.16494024561167800, 22.80236319901826600 ) ) ; +#10371 = ADVANCED_FACE ( 'NONE', ( #6044 ), #3822, .T. ) ; +#10372 = CARTESIAN_POINT ( 'NONE', ( 33.54902506644274500, -30.29941372594134200, 27.13262531988036800 ) ) ; +#10373 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000002100, -27.26143653036265800, 7.897715615676788500 ) ) ; +#10374 = CARTESIAN_POINT ( 'NONE', ( 1.088780568698699800, -8.725575348504449400, 16.44617847690551900 ) ) ; +#10375 = CARTESIAN_POINT ( 'NONE', ( 37.08418171197351400, -12.49999999999998900, 12.61038769933317000 ) ) ; +#10376 = CARTESIAN_POINT ( 'NONE', ( 12.13018342399449000, -30.74173142126454600, 27.39671173010409400 ) ) ; +#10377 = CARTESIAN_POINT ( 'NONE', ( 8.733641692528424400, -29.87947418017360900, 25.60217323328369000 ) ) ; +#10378 = EDGE_CURVE ( 'NONE', #9515, #9629, #5730, .T. ) ; +#10379 = CARTESIAN_POINT ( 'NONE', ( 39.89336454583273900, -20.11933289994488000, -13.64634858640483900 ) ) ; +#10380 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -8.819374836855068600, -11.47762508629722200 ) ) ; +#10381 = CARTESIAN_POINT ( 'NONE', ( 41.72327898825811600, -9.693645654354195800, 25.00000000000000000 ) ) ; +#10382 = CARTESIAN_POINT ( 'NONE', ( 4.441210111198510700, -8.965786003793267500, -24.73521253353086600 ) ) ; +#10383 = ADVANCED_FACE ( 'NONE', ( #11477 ), #1497, .T. ) ; +#10384 = CARTESIAN_POINT ( 'NONE', ( 38.07515011726970800, -30.90945271835507300, 23.32853305757143400 ) ) ; +#10385 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12895, #6862, #820, #7942, #1819, #8957, #2834, #9962, #3837, #10981, #4867, #11977 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.003136284480202229100, 0.006272568960404458300, 0.007840711200505570700, 0.009408853440606690000, 0.01254513792080891700 ), + .UNSPECIFIED. ) ; +#10386 = FACE_OUTER_BOUND ( 'NONE', #7922, .T. ) ; +#10387 = CARTESIAN_POINT ( 'NONE', ( 35.49628017134850200, -29.79072241414523600, 26.03291391853100800 ) ) ; +#10388 = CARTESIAN_POINT ( 'NONE', ( 8.381282802672380700, -97.45098915447148600, 19.51278648977835000 ) ) ; +#10389 = CARTESIAN_POINT ( 'NONE', ( 32.39118865126155800, -95.07596123493894400, 16.64488179593918100 ) ) ; +#10390 = CARTESIAN_POINT ( 'NONE', ( 0.9430201867450810300, 11.58840635499422000, -24.05697981325500100 ) ) ; +#10391 = CARTESIAN_POINT ( 'NONE', ( 30.56928444693397000, -33.04097291146975800, 27.70512374658077400 ) ) ; +#10392 = CARTESIAN_POINT ( 'NONE', ( 7.194580589505181800, -29.24217317058884500, 23.98081900532330500 ) ) ; +#10393 = CARTESIAN_POINT ( 'NONE', ( 5.960710562555621400, -23.48530562171824700, 12.81408765136048100 ) ) ; +#10394 = CARTESIAN_POINT ( 'NONE', ( 31.43948162152521800, -30.82564617750446000, 27.87715373609259100 ) ) ; +#10395 = CARTESIAN_POINT ( 'NONE', ( 44.00941249301716600, -7.998837704781724500, -20.53757729045608800 ) ) ; +#10396 = CARTESIAN_POINT ( 'NONE', ( 12.13385841882757000, -30.89177798695250500, 27.36061427742449600 ) ) ; +#10397 = FACE_OUTER_BOUND ( 'NONE', #4426, .T. ) ; +#10398 = CARTESIAN_POINT ( 'NONE', ( 44.91128611977090700, -6.216443038148098000, -19.46415751269836700 ) ) ; +#10399 = CARTESIAN_POINT ( 'NONE', ( 38.94138607893815900, -30.56557552069063300, 21.52649507212913000 ) ) ; +#10400 = CARTESIAN_POINT ( 'NONE', ( 36.23394150420018900, -12.49999999999999600, -15.80772363492222400 ) ) ; +#10401 = CARTESIAN_POINT ( 'NONE', ( 13.71544122641971500, -18.04194218970215100, -26.89642281458728200 ) ) ; +#10402 = CARTESIAN_POINT ( 'NONE', ( 34.90707727875532400, -10.00000000000000000, 25.00000000000000000 ) ) ; +#10403 = CARTESIAN_POINT ( 'NONE', ( 20.01853928026181600, -28.77816371652371100, 29.18890308861620000 ) ) ; +#10404 = EDGE_CURVE ( 'NONE', #4514, #10045, #8151, .T. ) ; +#10405 = CARTESIAN_POINT ( 'NONE', ( 43.26530581670616000, -8.796370517808609800, 19.39866511063138100 ) ) ; +#10406 = CARTESIAN_POINT ( 'NONE', ( 0.08878162487291219000, -6.216909417506030900, -19.46420228729125100 ) ) ; +#10407 = CARTESIAN_POINT ( 'NONE', ( 6.119723158014273200, -28.90517070710834000, 22.05783846241010000 ) ) ; +#10408 = FACE_OUTER_BOUND ( 'NONE', #6192, .T. ) ; +#10409 = CARTESIAN_POINT ( 'NONE', ( 14.20205175531850500, -31.73787585330912400, 20.01290877163301500 ) ) ; +#10410 = CARTESIAN_POINT ( 'NONE', ( 19.32294015070516800, -19.89239283117047200, 23.25133985617579300 ) ) ; +#10411 = AXIS2_PLACEMENT_3D ( 'NONE', #12571, #6540, #483 ) ; +#10412 = CARTESIAN_POINT ( 'NONE', ( 36.55061140227439200, -29.63669424361974300, 25.29530677413559300 ) ) ; +#10413 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #13044, #8057, #8103, #1984 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 3.662022480839817200, 4.712388980384689700 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9101547199502736400, 0.9101547199502736400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#10414 = CARTESIAN_POINT ( 'NONE', ( 9.355687943002077800, -100.0000000000000100, 0.5869512781180517000 ) ) ; +#10415 = CARTESIAN_POINT ( 'NONE', ( 33.38321290302246100, -19.28001889572460600, 20.76292641183912100 ) ) ; +#10416 = CARTESIAN_POINT ( 'NONE', ( 33.57004131415006800, -30.65053353875429200, 27.11865823236740200 ) ) ; +#10417 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10418 = CARTESIAN_POINT ( 'NONE', ( 35.85350530012107100, -100.0000000000000300, -31.96713653986547900 ) ) ; +#10419 = ORIENTED_EDGE ( 'NONE', *, *, #5459, .T. ) ; +#10420 = EDGE_LOOP ( 'NONE', ( #5995, #6006, #6149, #6166 ) ) ; +#10421 = CARTESIAN_POINT ( 'NONE', ( 18.75267811565502600, -19.91182420594163100, 23.21058624840578200 ) ) ; +#10422 = CARTESIAN_POINT ( 'NONE', ( 12.13858865043522300, -30.47432394907683000, 27.42182731381757300 ) ) ; +#10423 = CARTESIAN_POINT ( 'NONE', ( 8.953009703760898200, -31.05746847889580300, 25.46093359663443000 ) ) ; +#10424 = LINE ( 'NONE', #3316, #879 ) ; +#10425 = CARTESIAN_POINT ( 'NONE', ( 25.88675710619975200, -20.86877381939303100, -26.92580718861961500 ) ) ; +#10426 = CARTESIAN_POINT ( 'NONE', ( 0.5275853707156594700, -11.05530812513294600, -11.60162984477673100 ) ) ; +#10427 = CARTESIAN_POINT ( 'NONE', ( 38.35340280250419200, -10.80526613487963900, 23.51040183995346300 ) ) ; +#10428 = EDGE_CURVE ( 'NONE', #5041, #7418, #12295, .T. ) ; +#10429 = CARTESIAN_POINT ( 'NONE', ( 38.26756323081360000, -29.51334877737753700, 23.83827701457689200 ) ) ; +#10430 = CARTESIAN_POINT ( 'NONE', ( 35.85350530012107100, -12.49999999999999600, -16.53852572787537400 ) ) ; +#10431 = ORIENTED_EDGE ( 'NONE', *, *, #11535, .T. ) ; +#10432 = CARTESIAN_POINT ( 'NONE', ( 35.61590063184011300, -30.56004743544672300, 26.08347835442025800 ) ) ; +#10433 = CARTESIAN_POINT ( 'NONE', ( 17.36947087277677000, -33.24401303854920500, 26.39543624675793200 ) ) ; +#10434 = CIRCLE ( 'NONE', #10342, 5.000000000000000900 ) ; +#10435 = CARTESIAN_POINT ( 'NONE', ( 34.96436839405609500, -94.71799171676538300, 16.56571532150399400 ) ) ; +#10436 = CARTESIAN_POINT ( 'NONE', ( 36.84932668722139900, -12.49999999999999300, 13.40279212280107600 ) ) ; +#10437 = CARTESIAN_POINT ( 'NONE', ( 30.14802858184530300, -31.80744843288833900, 20.24908556833268500 ) ) ; +#10438 = ADVANCED_FACE ( 'NONE', ( #5412 ), #6604, .F. ) ; +#10439 = CARTESIAN_POINT ( 'NONE', ( 7.055706984044267200, -30.70456289482171300, 24.02935267252300000 ) ) ; +#10440 = CARTESIAN_POINT ( 'NONE', ( 13.50125302872871200, -38.65132533478155400, 18.45418769069321000 ) ) ; +#10441 = CARTESIAN_POINT ( 'NONE', ( 31.33716909069525500, -30.80704228980241400, 27.91122362470052600 ) ) ; +#10442 = CARTESIAN_POINT ( 'NONE', ( 17.19720589765839600, -33.07417061656713700, 28.29702473240659800 ) ) ; +#10443 = CARTESIAN_POINT ( 'NONE', ( 39.88773534951522500, -29.46141107699200000, 21.78513279661703800 ) ) ; +#10444 = ORIENTED_EDGE ( 'NONE', *, *, #4761, .T. ) ; +#10445 = CARTESIAN_POINT ( 'NONE', ( 35.64431205699792600, -100.0000000000000300, -32.32580780564054400 ) ) ; +#10446 = CARTESIAN_POINT ( 'NONE', ( 14.57552153906115700, -23.81457604616904400, -26.41677521427375600 ) ) ; +#10447 = ADVANCED_FACE ( 'NONE', ( #3023 ), #7830, .T. ) ; +#10448 = VERTEX_POINT ( 'NONE', #10856 ) ; +#10449 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -19.87270537885227400, 23.25917566912282600 ) ) ; +#10450 = CARTESIAN_POINT ( 'NONE', ( 6.063047595085153700, -27.92073578006885300, 6.516796014226114800 ) ) ; +#10451 = PLANE ( 'NONE', #1000 ) ; +#10452 = CARTESIAN_POINT ( 'NONE', ( 20.00000000068497700, -19.13175989804976100, 23.38981055321568500 ) ) ; +#10453 = ORIENTED_EDGE ( 'NONE', *, *, #9131, .F. ) ; +#10454 = CARTESIAN_POINT ( 'NONE', ( 5.228979431158390600, -30.06475311615601600, 21.99634735913429000 ) ) ; +#10455 = CARTESIAN_POINT ( 'NONE', ( 12.09793919439623600, -32.67673390148097900, 26.84857170127848700 ) ) ; +#10456 = CARTESIAN_POINT ( 'NONE', ( 17.61956816729511000, -19.95734877500616000, 23.06239522708124000 ) ) ; +#10457 = CARTESIAN_POINT ( 'NONE', ( 36.70609408823172300, -30.55479361531075000, 25.33035255646921900 ) ) ; +#10458 = ORIENTED_EDGE ( 'NONE', *, *, #4132, .T. ) ; +#10459 = VERTEX_POINT ( 'NONE', #5780 ) ; +#10460 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.22646173104146800, 15.70671426917970600 ) ) ; +#10461 = CARTESIAN_POINT ( 'NONE', ( 35.89641396752033800, -19.40325202074677300, 18.57944738484080500 ) ) ; +#10462 = CARTESIAN_POINT ( 'NONE', ( 33.55005764060338400, -31.03689487896898300, 27.00494535895614200 ) ) ; +#10463 = EDGE_LOOP ( 'NONE', ( #4376, #3136, #3439 ) ) ; +#10464 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.26513044191135300, 8.543726478552413200 ) ) ; +#10465 = CARTESIAN_POINT ( 'NONE', ( 33.64771066131344700, -13.41914980538562000, -25.15601430610515600 ) ) ; +#10466 = ORIENTED_EDGE ( 'NONE', *, *, #2646, .T. ) ; +#10467 = CARTESIAN_POINT ( 'NONE', ( 36.71356669610641900, -12.50000000000000000, 13.79123591060020400 ) ) ; +#10468 = CARTESIAN_POINT ( 'NONE', ( 12.33347021928095100, -30.81446406281000700, 27.45984968957987600 ) ) ; +#10469 = VERTEX_POINT ( 'NONE', #9848 ) ; +#10470 = CARTESIAN_POINT ( 'NONE', ( 8.840739862021090200, -30.27382055587958500, 25.76042017398560400 ) ) ; +#10471 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10472 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, -8.794366478427356500, -12.23504887710498900 ) ) ; +#10473 = CARTESIAN_POINT ( 'NONE', ( 33.63916734593714600, -10.95554302800580800, 25.00000000000000000 ) ) ; +#10474 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999997300, -97.04517183358916600, 16.23828164244106600 ) ) ; +#10475 = CARTESIAN_POINT ( 'NONE', ( 38.26757154637071800, -30.65833204214791900, 23.63593143222179500 ) ) ; +#10476 = CARTESIAN_POINT ( 'NONE', ( 5.000666193365751700, -90.08414409138437400, -4.495944938627295600 ) ) ; +#10477 = CARTESIAN_POINT ( 'NONE', ( 35.49032270456815800, -31.16631482981133400, 25.78109696940679300 ) ) ; +#10478 = EDGE_LOOP ( 'NONE', ( #13059, #10466, #4160, #11346, #1017, #3209, #9287, #12408, #802, #3471 ) ) ; +#10479 = AXIS2_PLACEMENT_3D ( 'NONE', #8038, #5578, #5551 ) ; +#10480 = ORIENTED_EDGE ( 'NONE', *, *, #12863, .F. ) ; +#10481 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000900, 18.70000000000001400 ) ) ; +#10482 = CARTESIAN_POINT ( 'NONE', ( 36.40590360675760500, -12.49999999999999800, 14.55282748878683600 ) ) ; +#10483 = CARTESIAN_POINT ( 'NONE', ( 33.27684276098933900, -38.09223847783447100, 17.52858580492687300 ) ) ; +#10484 = ORIENTED_EDGE ( 'NONE', *, *, #11315, .F. ) ; +#10485 = CARTESIAN_POINT ( 'NONE', ( 7.055698357061761100, -29.60442315386649200, 24.22334528289327300 ) ) ; +#10486 = CARTESIAN_POINT ( 'NONE', ( 41.04948961015422500, -17.89874042103972900, -11.47749200979346400 ) ) ; +#10487 = CARTESIAN_POINT ( 'NONE', ( 31.33674083522812400, -30.82200251329512500, 27.90871047193499900 ) ) ; +#10488 = CARTESIAN_POINT ( 'NONE', ( 13.07551530600084700, -32.72553602863892800, 25.41281461316770800 ) ) ; +#10489 = AXIS2_PLACEMENT_3D ( 'NONE', #1445, #8582, #2432 ) ; +#10490 = CARTESIAN_POINT ( 'NONE', ( 39.12012082192049400, -30.50274062431802900, 21.60034935199865600 ) ) ; +#10491 = AXIS2_PLACEMENT_3D ( 'NONE', #8591, #2441, #9595 ) ; +#10492 = CARTESIAN_POINT ( 'NONE', ( 35.64431205699792600, -12.49999999999999600, -16.89719699365043900 ) ) ; +#10493 = CARTESIAN_POINT ( 'NONE', ( 14.74674692798928700, -20.81199310588076700, -25.95397361869966700 ) ) ; +#10494 = ORIENTED_EDGE ( 'NONE', *, *, #952, .F. ) ; +#10495 = LINE ( 'NONE', #11850, #5055 ) ; +#10496 = DIRECTION ( 'NONE', ( 2.081668171172168900E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#10497 = CARTESIAN_POINT ( 'NONE', ( 15.09644992405900200, -93.16626021953837300, 22.41949856316433600 ) ) ; +#10498 = ORIENTED_EDGE ( 'NONE', *, *, #1635, .F. ) ; +#10499 = CARTESIAN_POINT ( 'NONE', ( 8.745297715500241200, -100.0000000000000100, -31.23924336750125300 ) ) ; +#10500 = SPHERICAL_SURFACE ( 'NONE', #214, 2.500000000000000000 ) ; +#10501 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10502 = PLANE ( 'NONE', #1099 ) ; +#10503 = CARTESIAN_POINT ( 'NONE', ( 5.985658396747658600, -29.00190465121804800, 22.20011038769915100 ) ) ; +#10504 = CARTESIAN_POINT ( 'NONE', ( 14.85197141815574900, -31.80744843288430000, 20.24908556833134200 ) ) ; +#10505 = CARTESIAN_POINT ( 'NONE', ( 36.23412796906598000, -12.50000000000000900, 14.92602922130259600 ) ) ; +#10506 = CARTESIAN_POINT ( 'NONE', ( 36.24958373281670300, -29.56328673681105500, 25.44987841486473800 ) ) ; +#10507 = CARTESIAN_POINT ( 'NONE', ( 37.97149750945318700, -19.56381294769330000, 15.73487472186763000 ) ) ; +#10508 = ADVANCED_FACE ( 'NONE', ( #2699 ), #2384, .F. ) ; +#10509 = EDGE_CURVE ( 'NONE', #11214, #1238, #35, .T. ) ; +#10510 = CARTESIAN_POINT ( 'NONE', ( 33.46760926003548100, -30.54414739020567300, 27.17386627719336900 ) ) ; +#10511 = CARTESIAN_POINT ( 'NONE', ( 27.38056689332232800, -19.95735458881755900, 23.06237349865669700 ) ) ; +#10512 = FACE_OUTER_BOUND ( 'NONE', #9509, .T. ) ; +#10513 = CARTESIAN_POINT ( 'NONE', ( 35.85370138279348100, -12.50000000000001200, 15.65682681553632500 ) ) ; +#10514 = VERTEX_POINT ( 'NONE', #7865 ) ; +#10515 = CARTESIAN_POINT ( 'NONE', ( 12.33611146813230300, -30.57404131950914600, 27.49401446984140700 ) ) ; +#10516 = CARTESIAN_POINT ( 'NONE', ( 9.080750640521955600, -31.16865973916460000, 25.44616143568336900 ) ) ; +#10517 = CARTESIAN_POINT ( 'NONE', ( 20.14039537637302500, -27.96255689439435300, 27.45771657700780500 ) ) ; +#10518 = ADVANCED_FACE ( 'NONE', ( #10520 ), #9970, .T. ) ; +#10519 = CARTESIAN_POINT ( 'NONE', ( 37.87415502584961000, -29.22440296370882300, 23.89622285023438400 ) ) ; +#10520 = FACE_OUTER_BOUND ( 'NONE', #3631, .T. ) ; +#10521 = CARTESIAN_POINT ( 'NONE', ( 35.51839269143707900, -30.39675650998852800, 26.16394351231402700 ) ) ; +#10522 = CARTESIAN_POINT ( 'NONE', ( 32.09286222414045400, -95.07596123493898700, 15.72863494345932600 ) ) ; +#10523 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999998200, -97.04517183358962000, 16.23828164244121900 ) ) ; +#10524 = CARTESIAN_POINT ( 'NONE', ( 35.64437982642294900, -12.50000000000001400, 16.01544672886290500 ) ) ; +#10525 = CARTESIAN_POINT ( 'NONE', ( 39.08788629091233700, -30.44840393649442900, 21.17219657682507300 ) ) ; +#10526 = CARTESIAN_POINT ( 'NONE', ( 7.299984990243979500, -30.97963813123959300, 23.80245336922089200 ) ) ; +#10527 = CARTESIAN_POINT ( 'NONE', ( 39.95339482714355500, -22.31012155625623800, -10.70496615899091900 ) ) ; +#10528 = CARTESIAN_POINT ( 'NONE', ( 31.33717013804389900, -30.83580381867206600, 27.90615188609239500 ) ) ; +#10529 = CARTESIAN_POINT ( 'NONE', ( 6.286974373503621600, -29.02398644053058500, 24.44846793297394800 ) ) ; +#10530 = CARTESIAN_POINT ( 'NONE', ( 39.33334453857047900, -29.08977352938867600, 21.96434758526328300 ) ) ; +#10531 = CARTESIAN_POINT ( 'NONE', ( 1.196815043795885500, -8.270162586373114500, 17.29210535359031200 ) ) ; +#10532 = CARTESIAN_POINT ( 'NONE', ( 14.27545812493200500, -18.04368805759639500, -27.12677613089565700 ) ) ; +#10533 = VERTEX_POINT ( 'NONE', #6829 ) ; +#10534 = CARTESIAN_POINT ( 'NONE', ( 20.06239438818706600, -31.29661376537660200, 28.74483239543690200 ) ) ; +#10535 = CARTESIAN_POINT ( 'NONE', ( 10.59150756406788400, -97.47405459003610400, 20.40952762262874000 ) ) ; +#10536 = EDGE_CURVE ( 'NONE', #9341, #742, #7631, .T. ) ; +#10537 = FACE_OUTER_BOUND ( 'NONE', #11614, .T. ) ; +#10538 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -23.91420473869551000, -27.45344971053349800 ) ) ; +#10539 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -10.00000000000000000, 25.00000000000000000 ) ) ; +#10540 = CARTESIAN_POINT ( 'NONE', ( 13.65755581225904400, -15.71316294547551400, 23.99261522752886900 ) ) ; +#10541 = CARTESIAN_POINT ( 'NONE', ( 5.796526445414371200, -30.48380201235575300, 22.04038488315955700 ) ) ; +#10542 = CARTESIAN_POINT ( 'NONE', ( 14.20754059864499500, -38.82060746691617900, 18.73907739207593400 ) ) ; +#10543 = CARTESIAN_POINT ( 'NONE', ( 34.96396462473229100, -12.50000000000001100, 17.06050405531910700 ) ) ; +#10544 = CARTESIAN_POINT ( 'NONE', ( 39.25844274781535900, -19.73008444536043300, 12.78932626582545500 ) ) ; +#10545 = CARTESIAN_POINT ( 'NONE', ( 33.46260673450436900, -30.91502434791218000, 27.09699030658912000 ) ) ; +#10546 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238600 ) ) ; +#10547 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1111, #3123, #10254 ), + ( #4136, #11281, #5157 ), + ( #12260, #6198, #145 ), + ( #7249, #1155, #8283 ), + ( #2155, #9289, #3171 ), + ( #10298, #4177, #11323 ), + ( #5204, #12303, #6241 ), + ( #190, #7299, #1192 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.002605986260948900700, 0.003908979391423351100, 0.005211972521897801500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9946465701320244000, 1.000000000000000000), + ( 1.000000000000000000, 0.9955329777651801300, 1.000000000000000000), + ( 1.000000000000000000, 0.9965732309472922200, 1.000000000000000000), + ( 1.000000000000000000, 0.9981818538279805300, 1.000000000000000000), + ( 1.000000000000000000, 0.9987266894284163600, 1.000000000000000000), + ( 1.000000000000000000, 0.9996258425309074700, 1.000000000000000000), + ( 1.000000000000000000, 0.9999885225805246200, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#10548 = CARTESIAN_POINT ( 'NONE', ( 34.96386659179888300, -100.0000000000000300, -33.37087759187894400 ) ) ; +#10549 = CIRCLE ( 'NONE', #4275, 2.499999999999999100 ) ; +#10550 = CARTESIAN_POINT ( 'NONE', ( 34.44973245509611100, -12.50000000000003000, 17.70275005532814900 ) ) ; +#10551 = CARTESIAN_POINT ( 'NONE', ( 12.74042703855768000, -30.88787922982010100, 27.59276937886571800 ) ) ; +#10552 = CARTESIAN_POINT ( 'NONE', ( 8.922345282274081400, -30.48312549568614600, 25.79828010759551700 ) ) ; +#10553 = CARTESIAN_POINT ( 'NONE', ( 30.24735395337195600, -28.11072249193231400, 26.76374334189344100 ) ) ; +#10554 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#10555 = CARTESIAN_POINT ( 'NONE', ( 38.28857172578442900, -30.32295974410235600, 24.03297622539724200 ) ) ; +#10556 = CYLINDRICAL_SURFACE ( 'NONE', #5803, 1.200000000000006600 ) ; +#10557 = CARTESIAN_POINT ( 'NONE', ( 35.41795122902236400, -31.11669580098658400, 25.87833056746553200 ) ) ; +#10558 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9848077530122092400, 0.1736481776669239200 ) ) ; +#10559 = CARTESIAN_POINT ( 'NONE', ( 33.58956877764909200, -12.50000000000002700, 18.58633306943192000 ) ) ; +#10560 = CARTESIAN_POINT ( 'NONE', ( 37.25588479098680500, -31.07415537202843200, 14.98628702465041900 ) ) ; +#10561 = ADVANCED_FACE ( 'NONE', ( #5082 ), #6458, .T. ) ; +#10562 = CARTESIAN_POINT ( 'NONE', ( 6.912845487108237200, -30.00806151561690900, 24.31604570418191700 ) ) ; +#10563 = CARTESIAN_POINT ( 'NONE', ( 39.46391552517739900, -20.80541901018168700, -7.598550418820385000 ) ) ; +#10564 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983000, 27.93782961424065500 ) ) ; +#10565 = CARTESIAN_POINT ( 'NONE', ( 39.64104289956481600, -30.23062878580933700, 21.75961179722437000 ) ) ; +#10566 = CYLINDRICAL_SURFACE ( 'NONE', #7671, 1.200000000000006600 ) ; +#10567 = CARTESIAN_POINT ( 'NONE', ( 0.9084284741201053000, -7.873854980441592500, 18.11134077736015500 ) ) ; +#10568 = CARTESIAN_POINT ( 'NONE', ( 15.65098197373822100, -23.85139527123832100, -26.79956867500239800 ) ) ; +#10569 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #6264, #2304, #3327 ), + ( #10460, #4328, #11482 ), + ( #5371, #12448, #6404 ), + ( #360, #7459, #1349 ), + ( #8489, #2348, #2675 ), + ( #9808, #3687, #10818 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( 0.001039526576916128600, 0.002724003985580842200, 0.004408481394245556000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.6364349251880766500, 1.000000000000000000), + ( 1.000000000000000000, 0.6473101940075868300, 1.000000000000000000), + ( 1.000000000000000000, 0.6587481149404055300, 1.000000000000000000), + ( 1.000000000000000000, 0.6826451105780486600, 1.000000000000000000), + ( 1.000000000000000000, 0.6949299336281604700, 1.000000000000000000), + ( 1.000000000000000000, 0.7075584262041021400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#10570 = ADVANCED_FACE ( 'NONE', ( #4754 ), #9876, .T. ) ; +#10571 = CARTESIAN_POINT ( 'NONE', ( 44.97161784026552300, 9.894538436513098400, -18.88806036896969700 ) ) ; +#10572 = CARTESIAN_POINT ( 'NONE', ( 9.587068771049532100, -94.72863208202319600, 16.31146166516705900 ) ) ; +#10573 = CARTESIAN_POINT ( 'NONE', ( 39.82272558746657200, -29.20305851973171600, 16.67736148301694500 ) ) ; +#10574 = EDGE_CURVE ( 'NONE', #11537, #10111, #7517, .T. ) ; +#10575 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -97.04517183358045400, 16.23828164246660000 ) ) ; +#10576 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122092400, 0.1736481776669239200 ) ) ; +#10577 = CARTESIAN_POINT ( 'NONE', ( 16.26803309156029800, -17.89605737530982300, 23.60771204351087600 ) ) ; +#10578 = ORIENTED_EDGE ( 'NONE', *, *, #3483, .T. ) ; +#10579 = CARTESIAN_POINT ( 'NONE', ( 5.500810128251821100, -29.32050022463948100, 22.23837298041684800 ) ) ; +#10580 = CARTESIAN_POINT ( 'NONE', ( 12.41981220252838000, -32.73480565852714400, 26.98692659285417500 ) ) ; +#10581 = EDGE_LOOP ( 'NONE', ( #4491, #4515, #4557, #4644, #4691 ) ) ; +#10582 = CARTESIAN_POINT ( 'NONE', ( 10.87416593078587600, -31.09359665453057900, 26.68633790044965100 ) ) ; +#10583 = CIRCLE ( 'NONE', #9425, 2.499999999999998700 ) ; +#10584 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#10585 = CARTESIAN_POINT ( 'NONE', ( 33.26055428007698800, -30.42974571427574700, 27.26149612290247500 ) ) ; +#10586 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10587 = CARTESIAN_POINT ( 'NONE', ( 34.96386659179888300, -12.49999999999999600, -17.94226677988883600 ) ) ; +#10588 = CARTESIAN_POINT ( 'NONE', ( 0.5122308897366657500, 11.02497441041352000, -22.89755382205269600 ) ) ; +#10589 = CARTESIAN_POINT ( 'NONE', ( 12.74001790028583700, -30.72087891586979300, 27.62612429777219700 ) ) ; +#10590 = VERTEX_POINT ( 'NONE', #2315 ) ; +#10591 = AXIS2_PLACEMENT_3D ( 'NONE', #5452, #5435, #5392 ) ; +#10592 = CARTESIAN_POINT ( 'NONE', ( 9.080326047829888800, -29.65414243214277000, 25.71383881848336000 ) ) ; +#10593 = CARTESIAN_POINT ( 'NONE', ( 34.40480714699430800, -12.29149773987750100, 24.52321669898078900 ) ) ; +#10594 = CARTESIAN_POINT ( 'NONE', ( 35.83964696850979000, -31.04604829231594100, 25.98322274786183400 ) ) ; +#10595 = CARTESIAN_POINT ( 'NONE', ( 35.36697499952463600, -10.16144953287975700, 24.97153209133052300 ) ) ; +#10596 = ORIENTED_EDGE ( 'NONE', *, *, #10404, .F. ) ; +#10597 = CARTESIAN_POINT ( 'NONE', ( 37.75299115923041200, -29.17711453683912400, 23.94813331840705900 ) ) ; +#10598 = CARTESIAN_POINT ( 'NONE', ( 35.20175439365731800, -30.17000791914929500, 26.31796990642485700 ) ) ; +#10599 = CARTESIAN_POINT ( 'NONE', ( 44.40624176555404300, -7.933717494178007500, 16.32584116805773900 ) ) ; +#10600 = ORIENTED_EDGE ( 'NONE', *, *, #1886, .F. ) ; +#10601 = ORIENTED_EDGE ( 'NONE', *, *, #4936, .T. ) ; +#10602 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10603 = CARTESIAN_POINT ( 'NONE', ( 2.066084209750130600, 10.75287675468457500, -24.66957895124933500 ) ) ; +#10604 = CARTESIAN_POINT ( 'NONE', ( 39.18468426860184200, -32.11798959398020500, 10.84415656343758600 ) ) ; +#10605 = CARTESIAN_POINT ( 'NONE', ( 7.487531711067344300, -31.05420190132078100, 23.91215558537712500 ) ) ; +#10606 = ORIENTED_EDGE ( 'NONE', *, *, #4715, .T. ) ; +#10607 = CARTESIAN_POINT ( 'NONE', ( 15.31556656900172400, -28.88618117369561500, 28.67220795628222200 ) ) ; +#10608 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654800, -30.82655086342982300, 27.93782961424065500 ) ) ; +#10609 = CARTESIAN_POINT ( 'NONE', ( 24.87520809154657500, -31.29794767387891600, 28.74459719137814800 ) ) ; +#10610 = EDGE_CURVE ( 'NONE', #1577, #462, #12530, .T. ) ; +#10611 = CARTESIAN_POINT ( 'NONE', ( 38.90968861234383500, -28.91652058886566600, 22.05536106840555600 ) ) ; +#10612 = ORIENTED_EDGE ( 'NONE', *, *, #350, .F. ) ; +#10613 = CARTESIAN_POINT ( 'NONE', ( 15.79228781456424900, -20.83272222901923600, -26.31001089555088200 ) ) ; +#10614 = ORIENTED_EDGE ( 'NONE', *, *, #12863, .T. ) ; +#10615 = CARTESIAN_POINT ( 'NONE', ( 7.955032871511243700, -95.07596123493898700, 13.25338931282116100 ) ) ; +#10616 = CARTESIAN_POINT ( 'NONE', ( 35.87577744497110600, -12.49999999999999500, -16.53944096942104000 ) ) ; +#10617 = CARTESIAN_POINT ( 'NONE', ( 36.31113513943454800, -18.37606225150613100, -23.19169456357282800 ) ) ; +#10618 = CARTESIAN_POINT ( 'NONE', ( 18.36451947972432600, -18.88930066307733200, 23.43257645346988100 ) ) ; +#10619 = CARTESIAN_POINT ( 'NONE', ( 6.324841082763902600, -30.74083654503549600, 22.30943038932125000 ) ) ; +#10620 = CARTESIAN_POINT ( 'NONE', ( 15.07169216871901100, -31.83008028243398600, 20.32333392403914700 ) ) ; +#10621 = CARTESIAN_POINT ( 'NONE', ( 10.83687072660816900, -30.61417882539952000, 26.84922939846394400 ) ) ; +#10622 = ORIENTED_EDGE ( 'NONE', *, *, #10973, .F. ) ; +#10623 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10624 = ADVANCED_FACE ( 'NONE', ( #7191 ), #12223, .T. ) ; +#10625 = ORIENTED_EDGE ( 'NONE', *, *, #12254, .T. ) ; +#10626 = CARTESIAN_POINT ( 'NONE', ( 15.46224195609076600, -95.07596123493893000, 9.319683354841659600 ) ) ; +#10627 = CARTESIAN_POINT ( 'NONE', ( 33.27097475014359400, -30.76778265797046400, 27.22622950249732200 ) ) ; +#10628 = CARTESIAN_POINT ( 'NONE', ( 39.63726503662852700, -30.52231436796672200, 9.507322611821859200 ) ) ; +#10629 = CARTESIAN_POINT ( 'NONE', ( 33.69808275181419100, -13.07500464686713600, -25.13922744725308800 ) ) ; +#10630 = CARTESIAN_POINT ( 'NONE', ( 32.54738930155927800, -9.581938168599359400, -24.99999999999999300 ) ) ; +#10631 = CARTESIAN_POINT ( 'NONE', ( 12.94427472181172000, -30.90258602612395200, 27.66107213511412500 ) ) ; +#10632 = CARTESIAN_POINT ( 'NONE', ( 9.123086822929090900, -30.70907494461888400, 25.85333329087263700 ) ) ; +#10633 = CARTESIAN_POINT ( 'NONE', ( 34.88712228397548600, -20.21940329917710600, -23.76875453814400200 ) ) ; +#10634 = CARTESIAN_POINT ( 'NONE', ( 39.40005849816623100, -29.44846291244129700, 23.84213368119622700 ) ) ; +#10635 = ORIENTED_EDGE ( 'NONE', *, *, #12109, .F. ) ; +#10636 = ADVANCED_FACE ( 'NONE', ( #4435 ), #6860, .F. ) ; +#10637 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#10638 = CARTESIAN_POINT ( 'NONE', ( 38.22130705178154400, -30.07251648464389900, 24.18952945872312600 ) ) ; +#10639 = CARTESIAN_POINT ( 'NONE', ( 35.20175120187450800, -30.88944357736955100, 26.19112812400409900 ) ) ; +#10640 = CARTESIAN_POINT ( 'NONE', ( 44.30096319509987500, -9.999999999999998200, 13.32741038030196500 ) ) ; +#10641 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -12.50000000000001100, 22.05918254822886100 ) ) ; +#10642 = CARTESIAN_POINT ( 'NONE', ( 33.28804390566629200, -12.50000000000000900, 18.86756211017133800 ) ) ; +#10643 = ORIENTED_EDGE ( 'NONE', *, *, #2449, .T. ) ; +#10644 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000002100, -27.36074002524381400, 8.074055433617134600 ) ) ; +#10645 = CARTESIAN_POINT ( 'NONE', ( 7.057148540507137500, -30.30100931538080300, 24.44496139891421300 ) ) ; +#10646 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -1.972066022637282400, 11.18414218126905400 ) ) ; +#10647 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10648 = CIRCLE ( 'NONE', #11593, 2.499999999999998200 ) ; +#10649 = CARTESIAN_POINT ( 'NONE', ( 39.92751202374271500, -29.87997420728872600, 21.87456381393390700 ) ) ; +#10650 = EDGE_LOOP ( 'NONE', ( #8753, #9051, #10124 ) ) ; +#10651 = CARTESIAN_POINT ( 'NONE', ( 34.44962244991852900, -100.0000000000000300, -34.01313420148405000 ) ) ; +#10652 = CARTESIAN_POINT ( 'NONE', ( 15.41191133335073500, -18.04634727172244600, -27.52059590912041600 ) ) ; +#10653 = CARTESIAN_POINT ( 'NONE', ( 13.69760447847373400, -95.07596123493891600, 15.99912156243431700 ) ) ; +#10654 = CARTESIAN_POINT ( 'NONE', ( 1.751120735233665700, -8.800629358799852800, -23.00000000000000000 ) ) ; +#10655 = CARTESIAN_POINT ( 'NONE', ( 39.88360966313124600, -28.91779103443796100, 15.44375112842641300 ) ) ; +#10656 = CARTESIAN_POINT ( 'NONE', ( 26.65794965565443800, -12.50000000000000400, -22.85677277641512000 ) ) ; +#10657 = CARTESIAN_POINT ( 'NONE', ( 34.02569047568045600, -20.06354145186324800, -24.57316814621050200 ) ) ; +#10658 = CARTESIAN_POINT ( 'NONE', ( 18.04370005169476000, -19.13907668583059200, 23.26050248955665400 ) ) ; +#10659 = VECTOR ( 'NONE', #9443, 1000.000000000000000 ) ; +#10660 = CARTESIAN_POINT ( 'NONE', ( 5.416189603976489400, -29.74308568718442900, 22.48555060987869000 ) ) ; +#10661 = CARTESIAN_POINT ( 'NONE', ( 14.44628006383259800, -38.87386673017115200, 18.82874935303464200 ) ) ; +#10662 = CARTESIAN_POINT ( 'NONE', ( 10.87426412178284500, -30.14687741537754200, 26.85306896349413800 ) ) ; +#10663 = CARTESIAN_POINT ( 'NONE', ( 39.92818872764293300, -19.91514393077651900, 9.508923891774451000 ) ) ; +#10664 = EDGE_CURVE ( 'NONE', #7598, #11277, #9572, .T. ) ; +#10665 = CARTESIAN_POINT ( 'NONE', ( 36.10553684151666000, -28.44319316509198700, 24.09943335096285500 ) ) ; +#10666 = CARTESIAN_POINT ( 'NONE', ( 33.15787654421676200, -30.40014371544545200, 27.30211720365694100 ) ) ; +#10667 = CARTESIAN_POINT ( 'NONE', ( 34.92760751619828600, -37.34581297570356600, 16.37708441118704900 ) ) ; +#10668 = CARTESIAN_POINT ( 'NONE', ( 6.755911162457310900, -29.06107036933833100, 23.29317586540348000 ) ) ; +#10669 = CARTESIAN_POINT ( 'NONE', ( 32.65398927845379300, -12.50000000000000700, 19.40216742582925100 ) ) ; +#10670 = CARTESIAN_POINT ( 'NONE', ( 12.94477819197893200, -30.77739975688724200, 27.68810727134663100 ) ) ; +#10671 = CYLINDRICAL_SURFACE ( 'NONE', #495, 4.999999999999997300 ) ; +#10672 = CARTESIAN_POINT ( 'NONE', ( 9.196716866824269600, -29.87974521281243100, 25.88912309315591300 ) ) ; +#10673 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, -19.48143887112369700 ) ) ; +#10674 = CARTESIAN_POINT ( 'NONE', ( 19.89693543307885200, -19.87568216611856900, 23.25829123793067800 ) ) ; +#10675 = CARTESIAN_POINT ( 'NONE', ( 4.183416244737404800, -11.36082213322306500, -22.84814859324405800 ) ) ; +#10676 = ORIENTED_EDGE ( 'NONE', *, *, #2035, .F. ) ; +#10677 = CARTESIAN_POINT ( 'NONE', ( 37.77251799659951800, -30.99356238095700900, 23.64444655185156600 ) ) ; +#10678 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -99.99999999999998600, -40.86942826376123600 ) ) ; +#10679 = CARTESIAN_POINT ( 'NONE', ( 2.457624633494159000E-013, -9.597939164849318400, -14.45328954946307600 ) ) ; +#10680 = AXIS2_PLACEMENT_3D ( 'NONE', #7924, #7906, #7862 ) ; +#10681 = CARTESIAN_POINT ( 'NONE', ( 34.96992244338180500, -29.96593202452180500, 26.38973737294503200 ) ) ; +#10682 = CARTESIAN_POINT ( 'NONE', ( 33.55467735256744500, -14.05475896074872600, -25.18701832036728300 ) ) ; +#10683 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.500000000000000000, -22.50000000000000000 ) ) ; +#10684 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -19.99999999999990400, -7.373247840169503000 ) ) ; +#10685 = ADVANCED_FACE ( 'NONE', ( #2078 ), #3376, .F. ) ; +#10686 = CARTESIAN_POINT ( 'NONE', ( 7.469743473899141500, -29.26071202128408500, 24.24506977526420900 ) ) ; +#10687 = CARTESIAN_POINT ( 'NONE', ( 13.87602186413935000, -28.14357552523087600, 26.50247038694395100 ) ) ; +#10688 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -97.35982398457493000, 15.15920007360412700 ) ) ; +#10689 = VECTOR ( 'NONE', #10125, 1000.000000000000000 ) ; +#10690 = CARTESIAN_POINT ( 'NONE', ( 38.87845623634040500, -30.62179163694667800, 21.75518198486029000 ) ) ; +#10691 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -12.49999999999998400, -22.94081745177112800 ) ) ; +#10692 = CARTESIAN_POINT ( 'NONE', ( 16.19809842384842500, -23.86662700083327200, -26.95905834772528900 ) ) ; +#10693 = CARTESIAN_POINT ( 'NONE', ( 5.347921880307926500, -92.25051266406958900, 0.8498699502921393000 ) ) ; +#10694 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000900, 17.50000000000000400 ) ) ; +#10695 = CARTESIAN_POINT ( 'NONE', ( 39.90510466222632900, -28.77977081727096500, 14.82529594780128300 ) ) ; +#10696 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#10697 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #6519, #3435, #8600 ), + ( #2448, #9600, #3477 ), + ( #10609, #4481, #11631 ), + ( #5527, #12591, #6560 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0001872366595206041700 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7941268098083124100, 1.000000000000000000), + ( 1.000000000000000000, 0.7941518730292338500, 1.000000000000000000), + ( 1.000000000000000000, 0.7941643991125682000, 1.000000000000000000), + ( 1.000000000000000000, 0.7941643989882851700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#10698 = CARTESIAN_POINT ( 'NONE', ( 14.31548074400243200, -19.19652299744720700, 22.24242482035986900 ) ) ; +#10699 = CARTESIAN_POINT ( 'NONE', ( 6.353500151531437500, -28.96886583906297500, 22.62222887450460400 ) ) ; +#10700 = CYLINDRICAL_SURFACE ( 'NONE', #5244, 5.000000000000000000 ) ; +#10701 = CARTESIAN_POINT ( 'NONE', ( 5.021728496074624500, -27.76489945217462100, 11.31706600803359600 ) ) ; +#10702 = CARTESIAN_POINT ( 'NONE', ( 16.71012092569722200, -100.0000000000000100, -37.94977236663728300 ) ) ; +#10703 = CARTESIAN_POINT ( 'NONE', ( 10.93695965696531400, -30.73571541855627800, 26.87175441905424800 ) ) ; +#10704 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#10705 = CARTESIAN_POINT ( 'NONE', ( 33.17152723413841600, -30.69812609895613800, 27.28200219766624800 ) ) ; +#10706 = DIRECTION ( 'NONE', ( -3.551631410960780200E-016, 3.469446951953615200E-016, -1.000000000000000000 ) ) ; +#10707 = CARTESIAN_POINT ( 'NONE', ( 6.649547844903840300, -29.03663428090507300, 23.12989795882374400 ) ) ; +#10708 = CARTESIAN_POINT ( 'NONE', ( 32.87324775061652800, -9.649222749464600600, -25.00000000000000000 ) ) ; +#10709 = CARTESIAN_POINT ( 'NONE', ( 12.94427407952268000, -30.66026239833294300, 27.70378577565889000 ) ) ; +#10710 = CARTESIAN_POINT ( 'NONE', ( 9.284868741082176400, -31.01594231516504200, 25.75346379933272100 ) ) ; +#10711 = LINE ( 'NONE', #9826, #13006 ) ; +#10712 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10713 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#10714 = CARTESIAN_POINT ( 'NONE', ( 4.163230452743615500, -10.10818568531988700, -23.56102719502687700 ) ) ; +#10715 = CARTESIAN_POINT ( 'NONE', ( 10.17278706842403800, -12.47585493640978900, -25.00000000000000000 ) ) ; +#10716 = CARTESIAN_POINT ( 'NONE', ( 38.02337404325292200, -29.75996060050442100, 24.26580177217670100 ) ) ; +#10717 = CARTESIAN_POINT ( 'NONE', ( 0.7116480230747218600, -9.499271001642842500, -17.82559808327496100 ) ) ; +#10718 = EDGE_CURVE ( 'NONE', #300, #11089, #4118, .T. ) ; +#10719 = ORIENTED_EDGE ( 'NONE', *, *, #4482, .T. ) ; +#10720 = CARTESIAN_POINT ( 'NONE', ( 35.04068953314913400, -30.65837447604078000, 26.39005074090621500 ) ) ; +#10721 = ORIENTED_EDGE ( 'NONE', *, *, #2643, .F. ) ; +#10722 = CARTESIAN_POINT ( 'NONE', ( 44.21962933508760300, -9.421170187760232300, 14.63435376773204800 ) ) ; +#10723 = CYLINDRICAL_SURFACE ( 'NONE', #11048, 2.499999999999999600 ) ; +#10724 = CARTESIAN_POINT ( 'NONE', ( 12.45516445671614900, -9.581513379571079600, -25.00000000000000000 ) ) ; +#10725 = CARTESIAN_POINT ( 'NONE', ( 32.32189301366268100, -12.50000000000001100, 19.65483266927506600 ) ) ; +#10726 = CARTESIAN_POINT ( 'NONE', ( 5.464394134704199300, -22.77317988002338500, -15.90602150443604400 ) ) ; +#10727 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12182, #11196, #3959, #2957, #9083, #1943, #8061, #288, #7397, #4587, #3576, #5353, #9434, #3314, #2289, #6389, #340, #5932, #8429, #5629 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001700956126187951100, 0.002551434189281933000, 0.003401912252375914400, 0.005102868378563878100, 0.006803824504751841000, 0.008504780630939803900, 0.01020573675712776800, 0.01190669288331573100, 0.01360764900950369400 ), + .UNSPECIFIED. ) ; +#10728 = CARTESIAN_POINT ( 'NONE', ( 7.295278072123689000, -30.61548572498266900, 24.44204759039434900 ) ) ; +#10729 = CARTESIAN_POINT ( 'NONE', ( 8.886165179345377800, -29.14344339881936800, 26.16723136652092300 ) ) ; +#10730 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10731 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5199, #4174, #6237, #187, #7293, #1190, #8321, #2193 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 4.220764384040162200E-017, 0.001954563120605123000, 0.002931844680907665200, 0.003909126241210207800 ), + .UNSPECIFIED. ) ; +#10732 = CARTESIAN_POINT ( 'NONE', ( 40.00750293030212400, -95.07596123493897300, -4.496020763364953200 ) ) ; +#10733 = CARTESIAN_POINT ( 'NONE', ( 39.80662857764373500, -29.55944880287744800, 22.08548967867020000 ) ) ; +#10734 = VERTEX_POINT ( 'NONE', #9545 ) ; +#10735 = CARTESIAN_POINT ( 'NONE', ( 34.44962244991852900, -12.49999999999999600, -18.58452338949394500 ) ) ; +#10736 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -19.87270537885227400, 23.25917566912282600 ) ) ; +#10737 = CYLINDRICAL_SURFACE ( 'NONE', #10184, 3.189999999999995100 ) ; +#10738 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -19.99999999999987600, -7.373247840157476100 ) ) ; +#10739 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884030500E-016, -7.274707761195139200, 13.03569181578441600 ) ) ; +#10740 = CARTESIAN_POINT ( 'NONE', ( 39.03339678999351700, -28.90350506946044000, 21.75172308334954300 ) ) ; +#10741 = EDGE_CURVE ( 'NONE', #462, #1577, #1756, .T. ) ; +#10742 = CARTESIAN_POINT ( 'NONE', ( 17.06650248351534000, -28.03491095736269400, 27.28351691549979900 ) ) ; +#10743 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10744 = CARTESIAN_POINT ( 'NONE', ( 5.633919646652824300, -30.12329192680824300, 22.64837010147165600 ) ) ; +#10745 = CARTESIAN_POINT ( 'NONE', ( 5.084868295210976700, -28.23680790293927200, 14.68792462719735800 ) ) ; +#10746 = CARTESIAN_POINT ( 'NONE', ( 13.73942079380888800, -99.99999999999998600, 20.91762972292025300 ) ) ; +#10747 = CARTESIAN_POINT ( 'NONE', ( 10.95996620172350700, -30.24767968479121200, 26.90848658900727100 ) ) ; +#10748 = ORIENTED_EDGE ( 'NONE', *, *, #3162, .F. ) ; +#10749 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000700, -94.87460690261258400, 20.85928444527439000 ) ) ; +#10750 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000700, -95.07596123493894400, 16.93034213569666900 ) ) ; +#10751 = CARTESIAN_POINT ( 'NONE', ( 33.15791451367748300, -31.00935010304798200, 27.19478995185856700 ) ) ; +#10752 = ORIENTED_EDGE ( 'NONE', *, *, #10741, .F. ) ; +#10753 = CARTESIAN_POINT ( 'NONE', ( 12.31853550491302800, -12.50000000000000700, 19.40633557819750600 ) ) ; +#10754 = CARTESIAN_POINT ( 'NONE', ( 6.555442825953931200, -29.01482951953225600, 22.97320546369793000 ) ) ; +#10755 = CARTESIAN_POINT ( 'NONE', ( 31.30114002041792900, -12.50000000000001100, 20.35486057157798000 ) ) ; +#10756 = CARTESIAN_POINT ( 'NONE', ( 13.25250401567893000, -30.81491454310014100, 27.78247786326417000 ) ) ; +#10757 = VERTEX_POINT ( 'NONE', #2398 ) ; +#10758 = EDGE_CURVE ( 'NONE', #8086, #11729, #5217, .T. ) ; +#10759 = CARTESIAN_POINT ( 'NONE', ( 9.214429459392263800, -30.23979857374980200, 25.99734233259381700 ) ) ; +#10760 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -10.00000000000000000, 25.00000000000000000 ) ) ; +#10761 = ORIENTED_EDGE ( 'NONE', *, *, #12207, .F. ) ; +#10762 = CARTESIAN_POINT ( 'NONE', ( 4.034459990737280700, -9.117203388502519000, -24.58394313019383400 ) ) ; +#10763 = VERTEX_POINT ( 'NONE', #443 ) ; +#10764 = CARTESIAN_POINT ( 'NONE', ( 1.103029879442909200, -8.797558397925561400, -19.80678863497711000 ) ) ; +#10765 = CARTESIAN_POINT ( 'NONE', ( 37.89854670358894100, -30.76852142855046100, 23.97830105594624000 ) ) ; +#10766 = ORIENTED_EDGE ( 'NONE', *, *, #11133, .T. ) ; +#10767 = CARTESIAN_POINT ( 'NONE', ( 34.59418077766398600, -30.01803164609980700, 26.59878789374488800 ) ) ; +#10768 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#10769 = ORIENTED_EDGE ( 'NONE', *, *, #230, .F. ) ; +#10770 = CARTESIAN_POINT ( 'NONE', ( 11.45055704587296800, -10.35346563389791500, -25.00000000000033400 ) ) ; +#10771 = CARTESIAN_POINT ( 'NONE', ( 30.58123676865923100, -12.49999999999998900, 20.75040436077094300 ) ) ; +#10772 = CARTESIAN_POINT ( 'NONE', ( 12.37001240279552100, -23.70735068695261900, -25.30892777343529000 ) ) ; +#10773 = ORIENTED_EDGE ( 'NONE', *, *, #1118, .T. ) ; +#10774 = CARTESIAN_POINT ( 'NONE', ( 7.406427985673076400, -29.59957249446610600, 24.51366632499611200 ) ) ; +#10775 = CARTESIAN_POINT ( 'NONE', ( 5.988978337070957300, -31.36247645288733900, 23.81250281265485600 ) ) ; +#10776 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122091300, -0.1736481776669239500 ) ) ; +#10777 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5618, #6749, #9820, #3694 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0009160441164419312700, 0.004358939985254961900 ), + .UNSPECIFIED. ) ; +#10778 = CARTESIAN_POINT ( 'NONE', ( 44.02655397345838400, -95.07596123493894400, 2.049002866222572100 ) ) ; +#10779 = EDGE_CURVE ( 'NONE', #12584, #6802, #2861, .T. ) ; +#10780 = CARTESIAN_POINT ( 'NONE', ( 38.90709598213933200, -30.62577895320885800, 21.91878659366153300 ) ) ; +#10781 = CARTESIAN_POINT ( 'NONE', ( 33.58942613950736000, -100.0000000000000300, -34.89671252249890200 ) ) ; +#10782 = CARTESIAN_POINT ( 'NONE', ( 16.32343971514047400, -20.84128211430847000, -26.45818665242551800 ) ) ; +#10783 = ORIENTED_EDGE ( 'NONE', *, *, #125, .F. ) ; +#10784 = ORIENTED_EDGE ( 'NONE', *, *, #12325, .T. ) ; +#10785 = CARTESIAN_POINT ( 'NONE', ( 33.29058427154827600, -99.99999999999995700, 20.34211979670008200 ) ) ; +#10786 = CARTESIAN_POINT ( 'NONE', ( 39.95631381408864500, -28.37363948782782300, 12.96722566847748900 ) ) ; +#10787 = ORIENTED_EDGE ( 'NONE', *, *, #8808, .F. ) ; +#10788 = CARTESIAN_POINT ( 'NONE', ( 44.09157152587820900, -7.873854980443975500, 18.11134077736176100 ) ) ; +#10789 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000400, -19.87270537885227700, 23.25917566912282600 ) ) ; +#10790 = CARTESIAN_POINT ( 'NONE', ( 6.381191134420380900, -29.03028728559278100, 22.80229687094274000 ) ) ; +#10791 = CARTESIAN_POINT ( 'NONE', ( 13.07682334445053000, -32.84459165560503600, 27.24682378892583400 ) ) ; +#10792 = CARTESIAN_POINT ( 'NONE', ( 11.14489332803023400, -30.92899062019192500, 26.90709933296293600 ) ) ; +#10793 = EDGE_CURVE ( 'NONE', #10514, #11857, #539, .T. ) ; +#10794 = CARTESIAN_POINT ( 'NONE', ( 3.256794665704291400, -9.964244323352462000, -22.67616590401871000 ) ) ; +#10796 = EDGE_CURVE ( 'NONE', #494, #11438, #10198, .T. ) ; +#10795 = CARTESIAN_POINT ( 'NONE', ( 38.30620694854289400, -8.168321521413110600, -24.99093916573421100 ) ) ; +#10797 = CARTESIAN_POINT ( 'NONE', ( 32.86874200297205600, -30.65036968032189800, 27.41040860346964400 ) ) ; +#10798 = LINE ( 'NONE', #6762, #7 ) ; +#10799 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000001400, -12.50000000000001100, 26.62899292861733600 ) ) ; +#10800 = CARTESIAN_POINT ( 'NONE', ( 33.58942613950736000, -12.49999999999999600, -19.46810171050879700 ) ) ; +#10801 = FACE_OUTER_BOUND ( 'NONE', #305, .T. ) ; +#10802 = CARTESIAN_POINT ( 'NONE', ( 32.98035138062728300, -9.678028666275642100, -25.00000000000000400 ) ) ; +#10803 = CARTESIAN_POINT ( 'NONE', ( 13.25162289048408000, -30.73638200489976700, 27.79492040810440700 ) ) ; +#10804 = CARTESIAN_POINT ( 'NONE', ( 9.508701931738798400, -31.16442835881125700, 25.78243118881589900 ) ) ; +#10805 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -2.500000000000016400, 25.00105000000004200 ) ) ; +#10806 = CARTESIAN_POINT ( 'NONE', ( 6.525817865526455800, -9.083947991493699800, -24.91244675282813100 ) ) ; +#10807 = CARTESIAN_POINT ( 'NONE', ( 37.76000093859993000, -29.35076271974297100, 24.14319429866730000 ) ) ; +#10808 = CIRCLE ( 'NONE', #10491, 1.200000000000006600 ) ; +#10809 = CARTESIAN_POINT ( 'NONE', ( 34.65375125846768600, -30.54609285314506900, 26.61791689344972800 ) ) ; +#10810 = CARTESIAN_POINT ( 'NONE', ( 31.95391905240690300, -30.68146038995675100, 27.73457101324245500 ) ) ; +#10811 = EDGE_LOOP ( 'NONE', ( #1719, #1842, #1887, #2036 ) ) ; +#10812 = CARTESIAN_POINT ( 'NONE', ( 11.26837624739300400, -11.47839711210706100, -25.07080158295837800 ) ) ; +#10813 = CARTESIAN_POINT ( 'NONE', ( 29.44156399801118300, -12.49999999999998900, 21.23571502686337100 ) ) ; +#10814 = CARTESIAN_POINT ( 'NONE', ( 7.801833331794073300, -30.98823763880681900, 24.46099856612936900 ) ) ; +#10815 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122092400, -0.1736481776669239200 ) ) ; +#10816 = CARTESIAN_POINT ( 'NONE', ( 41.36247384430225800, -11.20574421337073400, -22.17609394479996300 ) ) ; +#10817 = CARTESIAN_POINT ( 'NONE', ( 35.85896063566531900, -95.07596123493894400, 5.345650428366315800 ) ) ; +#10818 = CARTESIAN_POINT ( 'NONE', ( 37.50319463246212600, -95.07594910863598200, 12.91381698720284500 ) ) ; +#10819 = EDGE_CURVE ( 'NONE', #2040, #2635, #11358, .T. ) ; +#10820 = CARTESIAN_POINT ( 'NONE', ( 39.30523403235694200, -29.18901748337988200, 22.26699466973596100 ) ) ; +#10821 = VECTOR ( 'NONE', #9890, 1000.000000000000000 ) ; +#10822 = APPROVAL ( #3133, 'UNSPECIFIED' ) ; +#10823 = CARTESIAN_POINT ( 'NONE', ( 33.76720987583480100, -12.20888160876432200, -25.09998423961199900 ) ) ; +#10824 = CARTESIAN_POINT ( 'NONE', ( 15.99042230220143800, -18.04737337764784000, -27.68482011926083100 ) ) ; +#10825 = ADVANCED_FACE ( 'NONE', ( #1450 ), #6532, .T. ) ; +#10826 = CARTESIAN_POINT ( 'NONE', ( 36.44057141166704400, -30.47800006868029900, 25.54759887539453800 ) ) ; +#10827 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, -17.49999999999999600 ) ) ; +#10828 = CARTESIAN_POINT ( 'NONE', ( 38.98025037089269100, -28.88244952392658900, 21.75543578860423100 ) ) ; +#10829 = CARTESIAN_POINT ( 'NONE', ( 42.98142097986590900, -14.03715804026810200, 8.005331014629273800 ) ) ; +#10830 = CARTESIAN_POINT ( 'NONE', ( 6.279854955693162200, -30.58225766529257000, 22.99059931150182100 ) ) ; +#10831 = CARTESIAN_POINT ( 'NONE', ( 15.51682020731962400, -31.87373873857453400, 20.46251347879711300 ) ) ; +#10832 = CARTESIAN_POINT ( 'NONE', ( 28.97910846373125800, -23.86417670713136700, -26.93395974116856100 ) ) ; +#10833 = CARTESIAN_POINT ( 'NONE', ( 11.13746721293322200, -30.48385973704649700, 27.00198292237848800 ) ) ; +#10834 = EDGE_CURVE ( 'NONE', #4849, #318, #9007, .T. ) ; +#10835 = CIRCLE ( 'NONE', #1745, 2.499999999999999100 ) ; +#10836 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#10837 = EDGE_CURVE ( 'NONE', #9000, #5245, #1139, .T. ) ; +#10838 = CARTESIAN_POINT ( 'NONE', ( 39.89560118282366800, -8.652098222708986000, -24.89137517383256100 ) ) ; +#10839 = ORIENTED_EDGE ( 'NONE', *, *, #12699, .F. ) ; +#10840 = CARTESIAN_POINT ( 'NONE', ( 32.86457905032712300, -30.92397216103826800, 27.35105121875476900 ) ) ; +#10841 = CARTESIAN_POINT ( 'NONE', ( 33.28778345452907000, -100.0000000000000300, -35.17784268884944500 ) ) ; +#10842 = CARTESIAN_POINT ( 'NONE', ( 29.04938437009369800, -12.50000000000000700, 21.38008882454650100 ) ) ; +#10843 = CARTESIAN_POINT ( 'NONE', ( 13.35465130883451000, -30.84403192988872900, 27.80962316889522900 ) ) ; +#10844 = CARTESIAN_POINT ( 'NONE', ( 9.382792906523667000, -30.47217263514112400, 26.10054914939945200 ) ) ; +#10845 = CARTESIAN_POINT ( 'NONE', ( 25.38132563828970200, -30.67114755350118600, 28.85511851644465200 ) ) ; +#10846 = CARTESIAN_POINT ( 'NONE', ( 6.712006322907198500, -7.463541018600214000, -25.00000000000000000 ) ) ; +#10847 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10848 = CARTESIAN_POINT ( 'NONE', ( 38.07604467103012500, -30.39655085624695400, 24.23823621731447600 ) ) ; +#10849 = CARTESIAN_POINT ( 'NONE', ( 24.81280744310813100, -31.29913968154957600, 28.74438700826459600 ) ) ; +#10850 = EDGE_CURVE ( 'NONE', #142, #5893, #6631, .T. ) ; +#10851 = FACE_OUTER_BOUND ( 'NONE', #1859, .T. ) ; +#10852 = CARTESIAN_POINT ( 'NONE', ( 34.59703493212605700, -31.11426189953395000, 26.41087752832304900 ) ) ; +#10853 = CARTESIAN_POINT ( 'NONE', ( 33.62157123983254100, -30.28036453795314400, 27.09894823273267100 ) ) ; +#10854 = CARTESIAN_POINT ( 'NONE', ( 28.25837975878103600, -12.50000000000001100, 21.62634845232998900 ) ) ; +#10855 = CARTESIAN_POINT ( 'NONE', ( 7.559663953523584100, -30.07936624644942100, 24.87607195362858500 ) ) ; +#10856 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -2.500000000000016400, 25.00000000000000000 ) ) ; +#10857 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -99.99999999999998600, 6.630571736238761300 ) ) ; +#10858 = CARTESIAN_POINT ( 'NONE', ( 31.68445376637407000, -89.29659766701465200, 9.458710949951301600 ) ) ; +#10859 = CARTESIAN_POINT ( 'NONE', ( 39.30529123750650900, -30.42530596537882900, 22.04632166531836600 ) ) ; +#10860 = VECTOR ( 'NONE', #10704, 1000.000000000000000 ) ; +#10861 = CARTESIAN_POINT ( 'NONE', ( 33.73968958535532200, -12.72996624190705900, -25.12295594819234500 ) ) ; +#10862 = CARTESIAN_POINT ( 'NONE', ( 17.03293935221174500, -23.88504137461599800, -27.15016412040264300 ) ) ; +#10863 = CARTESIAN_POINT ( 'NONE', ( 36.24910367290709000, -31.16370493873762700, 25.16702976395258400 ) ) ; +#10864 = CARTESIAN_POINT ( 'NONE', ( 27.63299591619193800, -31.18422324425348400, 28.61505639569380200 ) ) ; +#10865 = CARTESIAN_POINT ( 'NONE', ( 24.83778743149972000, -23.91413235327618700, -27.45254629310585400 ) ) ; +#10866 = EDGE_CURVE ( 'NONE', #6647, #4835, #11622, .T. ) ; +#10867 = CARTESIAN_POINT ( 'NONE', ( 44.80732391103554600, -6.388650717423377800, 16.58956707586608200 ) ) ; +#10868 = CARTESIAN_POINT ( 'NONE', ( 9.997477301173058000, -94.71789415301100200, 16.54779693529680200 ) ) ; +#10869 = CARTESIAN_POINT ( 'NONE', ( 6.279802973304016200, -29.36371098777675200, 23.20326089297690700 ) ) ; +#10870 = CARTESIAN_POINT ( 'NONE', ( 15.17670021455167600, -39.02155075753984200, 19.07620989343432400 ) ) ; +#10871 = CARTESIAN_POINT ( 'NONE', ( 38.05560819061665300, -23.14528794596341400, -19.60247935267769400 ) ) ; +#10872 = CARTESIAN_POINT ( 'NONE', ( 11.25588630422775300, -31.05321816574151200, 26.90363355285379800 ) ) ; +#10873 = FACE_OUTER_BOUND ( 'NONE', #13069, .T. ) ; +#10874 = CARTESIAN_POINT ( 'NONE', ( 39.39285373178074000, -10.81361921802807300, -24.27229108699626500 ) ) ; +#10875 = CARTESIAN_POINT ( 'NONE', ( 32.66375919669261000, -30.57402470147708900, 27.49418466837755300 ) ) ; +#10876 = CARTESIAN_POINT ( 'NONE', ( 7.535837433077050600, -16.92439944314494200, -22.94281600404365300 ) ) ; +#10877 = CARTESIAN_POINT ( 'NONE', ( 33.28778345452907000, -12.49999999999999600, -19.74923187685933700 ) ) ; +#10878 = CARTESIAN_POINT ( 'NONE', ( 27.85931869759000500, -12.50000000000001200, 21.72865235308544400 ) ) ; +#10879 = CARTESIAN_POINT ( 'NONE', ( 13.35500224655482000, -30.78094349112711100, 27.82110461187219400 ) ) ; +#10880 = ORIENTED_EDGE ( 'NONE', *, *, #3974, .T. ) ; +#10881 = CARTESIAN_POINT ( 'NONE', ( 9.509027117547889300, -29.77072178069264300, 26.02768064887976600 ) ) ; +#10882 = CARTESIAN_POINT ( 'NONE', ( 6.611556705448899500, -22.64217785379387100, 14.41905430795961600 ) ) ; +#10883 = CARTESIAN_POINT ( 'NONE', ( 36.71851553603307400, -100.0000000000000100, -1.650587127058549700 ) ) ; +#10884 = EDGE_CURVE ( 'NONE', #11976, #9341, #8936, .T. ) ; +#10885 = CARTESIAN_POINT ( 'NONE', ( 2.602085213965211000E-015, -8.007775336428329300, -15.14195431901296400 ) ) ; +#10886 = CIRCLE ( 'NONE', #9440, 2.500000000000000400 ) ; +#10887 = CARTESIAN_POINT ( 'NONE', ( 37.51321988817748100, -29.23712171492750800, 24.23364406365486400 ) ) ; +#10888 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12166, #12328, #6143, #2781, #11937, #11809, #11772, #11690, #11376, #11222, #11470, #11198, #11182, #11018, #10823, #10861, #10629, #10465 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0005289196156850048100, 0.001057839231370009600, 0.001322299039212512000, 0.001586758847055014400, 0.002115678462740030500, 0.002644598078425046600, 0.003173517694110062700, 0.004231356925480094800 ), + .UNSPECIFIED. ) ; +#10889 = CARTESIAN_POINT ( 'NONE', ( 29.53674870068280000, -22.42610571993885300, -26.61101811336552800 ) ) ; +#10890 = EDGE_CURVE ( 'NONE', #5815, #11075, #4235, .T. ) ; +#10891 = AXIS2_PLACEMENT_3D ( 'NONE', #4384, #1406, #8538 ) ; +#10892 = CARTESIAN_POINT ( 'NONE', ( 34.44858336624422200, -30.39335120106154900, 26.72630753790653200 ) ) ; +#10893 = CARTESIAN_POINT ( 'NONE', ( 35.78399263109840700, -29.68861100508949100, 25.81439126780965800 ) ) ; +#10894 = ORIENTED_EDGE ( 'NONE', *, *, #885, .F. ) ; +#10895 = AXIS2_PLACEMENT_3D ( 'NONE', #9480, #3359, #10496 ) ; +#10896 = CARTESIAN_POINT ( 'NONE', ( 26.65182262239416000, -12.50000000000001100, 21.97521279406844400 ) ) ; +#10897 = CARTESIAN_POINT ( 'NONE', ( 8.037341835649733900, -31.12093888990567300, 24.50416372174616700 ) ) ; +#10898 = EDGE_LOOP ( 'NONE', ( #3884, #11569, #12033, #2003 ) ) ; +#10899 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000001100, -23.91420473869548100, -27.45344971053349800 ) ) ; +#10900 = CARTESIAN_POINT ( 'NONE', ( 7.246764274802884200, -31.01185065877141500, 23.62442665718815600 ) ) ; +#10901 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000001800, -95.07596123493894400, 15.95758058754438700 ) ) ; +#10902 = CARTESIAN_POINT ( 'NONE', ( 43.00000000000000000, 9.500000000000000000, -25.00000000000000000 ) ) ; +#10903 = CARTESIAN_POINT ( 'NONE', ( 38.72408727806250500, -29.00520975346120500, 22.61524184085407500 ) ) ; +#10904 = ORIENTED_EDGE ( 'NONE', *, *, #2134, .F. ) ; +#10905 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -30.22903959689355300, 26.39450799553350200 ) ) ; +#10906 = CARTESIAN_POINT ( 'NONE', ( 17.13240603925933700, -20.85169946014415700, -26.63549912213695200 ) ) ; +#10907 = ORIENTED_EDGE ( 'NONE', *, *, #5693, .F. ) ; +#10908 = CARTESIAN_POINT ( 'NONE', ( 36.34365725049420300, -30.27971328635087600, 25.63841457507602700 ) ) ; +#10909 = CARTESIAN_POINT ( 'NONE', ( 3.990209081675942100, -9.744657569535652500, 25.00000000000000000 ) ) ; +#10910 = CARTESIAN_POINT ( 'NONE', ( 27.04834426830811000, -20.85996343133012600, -26.77502219042893500 ) ) ; +#10911 = EDGE_CURVE ( 'NONE', #4526, #9054, #1896, .T. ) ; +#10912 = ORIENTED_EDGE ( 'NONE', *, *, #12699, .T. ) ; +#10913 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999889900, -5.316380084587136100, 16.09303653278836400 ) ) ; +#10914 = CARTESIAN_POINT ( 'NONE', ( 15.55961448211954800, -95.07596123493894400, 16.49608506106100900 ) ) ; +#10915 = CARTESIAN_POINT ( 'NONE', ( 6.731424798964546600, -30.86507860761734900, 23.05798226892073200 ) ) ; +#10916 = CARTESIAN_POINT ( 'NONE', ( 14.43071555306842200, -33.04097291147080300, 27.70512374658561000 ) ) ; +#10917 = CARTESIAN_POINT ( 'NONE', ( 43.75867410926697700, -8.299172637377871800, -22.00640175908956000 ) ) ; +#10918 = CARTESIAN_POINT ( 'NONE', ( 11.23148315810200500, -30.63236297782886900, 27.03218240024365900 ) ) ; +#10919 = ORIENTED_EDGE ( 'NONE', *, *, #350, .T. ) ; +#10920 = CARTESIAN_POINT ( 'NONE', ( 10.30907843231103600, -19.33715846401984400, 19.75078361949381600 ) ) ; +#10921 = CARTESIAN_POINT ( 'NONE', ( 2.425039312449673600, -9.376712918905107900, -21.87573147861788700 ) ) ; +#10922 = VERTEX_POINT ( 'NONE', #4780 ) ; +#10923 = ORIENTED_EDGE ( 'NONE', *, *, #12421, .T. ) ; +#10924 = CARTESIAN_POINT ( 'NONE', ( 40.83607622974399500, -10.10809681624090000, -23.56165020882134800 ) ) ; +#10925 = CARTESIAN_POINT ( 'NONE', ( 32.66637142177233200, -30.81451035597815000, 27.46002524955300900 ) ) ; +#10926 = CARTESIAN_POINT ( 'NONE', ( 32.65371374435567000, -100.0000000000000300, -35.71244580412996300 ) ) ; +#10927 = CARTESIAN_POINT ( 'NONE', ( 14.77904052769505900, -30.96230550829657000, 28.20904725471722700 ) ) ; +#10928 = CARTESIAN_POINT ( 'NONE', ( 13.55969964588688200, -30.84449800783912500, 27.87342563618310700 ) ) ; +#10929 = EDGE_CURVE ( 'NONE', #318, #9498, #9256, .T. ) ; +#10930 = CARTESIAN_POINT ( 'NONE', ( 9.483691240116025200, -30.65070460497696200, 26.11551435744029700 ) ) ; +#10931 = CARTESIAN_POINT ( 'NONE', ( 0.02832571919072554200, 9.894175532731914300, 16.11130155685650000 ) ) ; +#10932 = CARTESIAN_POINT ( 'NONE', ( 14.68570277748999200, -20.12953699311158600, 22.23412810415747700 ) ) ; +#10933 = CARTESIAN_POINT ( 'NONE', ( 29.07608945946902800, -100.0000000000000100, 5.963509649343827800 ) ) ; +#10934 = ORIENTED_EDGE ( 'NONE', *, *, #12822, .T. ) ; +#10935 = CARTESIAN_POINT ( 'NONE', ( 5.618509148920895600, -30.36150919687810700, 21.49424622637286600 ) ) ; +#10936 = ORIENTED_EDGE ( 'NONE', *, *, #7529, .T. ) ; +#10937 = CARTESIAN_POINT ( 'NONE', ( 37.94690386859013400, -30.16984554564481900, 24.47229132572247300 ) ) ; +#10938 = ORIENTED_EDGE ( 'NONE', *, *, #881, .T. ) ; +#10939 = CARTESIAN_POINT ( 'NONE', ( 28.57469902725267400, -16.42907122538590100, -26.13361871793192000 ) ) ; +#10940 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5617, #12643, #2633, #9770, #3656, #10785, #4665, #11796, #5711, #12759, #6748, #674, #7790, #1677, #8815 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 1, 2, 2, 2, 2, 4 ), + ( 0.09290921277289726500, 0.3196819095796720200, 0.4330682579830593100, 0.4897614321847534300, 0.5464546063864474900, 0.6598409547898356200, 0.7732273031932237500, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#10941 = CARTESIAN_POINT ( 'NONE', ( 34.43564582100793100, -30.94141988275297800, 26.60397731811142900 ) ) ; +#10942 = CARTESIAN_POINT ( 'NONE', ( 37.68935138083051600, -29.19257093271926400, 24.02416383580475000 ) ) ; +#10943 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, -18.70000000000000600 ) ) ; +#10944 = CARTESIAN_POINT ( 'NONE', ( 13.76586904079734500, -30.82654731345164100, 27.93780948131385600 ) ) ; +#10945 = VERTEX_POINT ( 'NONE', #12856 ) ; +#10946 = CARTESIAN_POINT ( 'NONE', ( 7.720940275010865300, -30.34884843505642100, 24.98966013906037600 ) ) ; +#10947 = CARTESIAN_POINT ( 'NONE', ( 18.55439891592550700, -20.92742629832700600, -26.92680008609820400 ) ) ; +#10948 = LOCAL_TIME ( 17, 45, 49.00000000000000000, #492 ) ; +#10949 = CARTESIAN_POINT ( 'NONE', ( 9.250331892289864300, -31.16977811567078400, 25.58123419758737400 ) ) ; +#10950 = DIRECTION ( 'NONE', ( 8.673617379884033500E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#10951 = CARTESIAN_POINT ( 'NONE', ( 42.94941648749876600, 10.60787792801391300, -24.74708243749382000 ) ) ; +#10952 = ORIENTED_EDGE ( 'NONE', *, *, #4740, .T. ) ; +#10953 = EDGE_CURVE ( 'NONE', #7642, #3943, #12674, .T. ) ; +#10954 = CARTESIAN_POINT ( 'NONE', ( 39.53710235842382300, -30.08776437352295500, 22.42356830794013300 ) ) ; +#10955 = CARTESIAN_POINT ( 'NONE', ( 33.74557842579889700, -32.37240435201580600, 24.71507424885337300 ) ) ; +#10956 = CARTESIAN_POINT ( 'NONE', ( 16.87212519550457300, -18.04874580596622000, -27.88136417875281800 ) ) ; +#10957 = CARTESIAN_POINT ( 'NONE', ( 36.18958837407966200, -31.11604149008326200, 25.27766765710088100 ) ) ; +#10958 = CARTESIAN_POINT ( 'NONE', ( 8.575058545298734500, -9.169898661548966600, 25.00000000000000000 ) ) ; +#10959 = CARTESIAN_POINT ( 'NONE', ( 29.58808928129458200, -18.04634727077769400, -27.52059574276719200 ) ) ; +#10960 = ORIENTED_EDGE ( 'NONE', *, *, #12417, .T. ) ; +#10961 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10962 = VECTOR ( 'NONE', #9397, 1000.000000000000000 ) ; +#10963 = CARTESIAN_POINT ( 'NONE', ( 6.177038672349912200, -29.82563722207689200, 23.43745588742400400 ) ) ; +#10964 = CARTESIAN_POINT ( 'NONE', ( 16.42382043722721700, -31.95460249792289500, 20.70678011833170000 ) ) ; +#10965 = ORIENTED_EDGE ( 'NONE', *, *, #2938, .T. ) ; +#10966 = CARTESIAN_POINT ( 'NONE', ( 20.18719255689187600, -31.29913968154957600, 28.74438700826459600 ) ) ; +#10967 = CARTESIAN_POINT ( 'NONE', ( 11.25713502583461300, -30.24861341187268900, 27.04272967151030800 ) ) ; +#10968 = CARTESIAN_POINT ( 'NONE', ( 7.779443006912951700, -19.49644092414724000, 16.92809749804587600 ) ) ; +#10969 = CARTESIAN_POINT ( 'NONE', ( 38.38853697321248100, -22.64228185804205000, 14.41884793562337200 ) ) ; +#10970 = CARTESIAN_POINT ( 'NONE', ( 6.846729629750810500, -95.07596123493894400, 2.206608581396023400 ) ) ; +#10971 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3016, #860, #5050 ), + ( #12147, #6080, #29 ), + ( #7134, #1035, #8161 ), + ( #2048, #9176, #3058 ), + ( #10191, #4059, #11206 ), + ( #5093, #12193, #6123 ), + ( #73, #7183, #1082 ), + ( #8206, #2089, #9223 ), + ( #3095, #10232, #4109 ), + ( #11252, #5131, #12236 ), + ( #6172, #118, #7227 ), + ( #1131, #8255, #2130 ), + ( #9267, #3144, #10272 ), + ( #4155, #11300, #5177 ), + ( #12277, #6216, #163 ), + ( #7271, #1173, #8304 ), + ( #2173, #9308, #3188 ), + ( #10319, #4197, #11341 ), + ( #5224, #12318, #6258 ), + ( #210, #7316, #1212 ), + ( #8341, #2216, #9350 ), + ( #3227, #10362, #4240 ), + ( #11385, #5265, #12362 ), + ( #6306, #253, #7360 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -2.103352214621878600E-017, 0.001016732693905484500, 0.002033465387810990300, 0.003050198081716496000, 0.004066930775622001400, 0.006100396163433012900, 0.007117128857338518200, 0.008133861551244023600, 0.01220079232686604700, 0.01321752502077155200, 0.01423425771467705700, 0.01626772310248806800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9832216388489926100, 1.000000000000000000), + ( 1.000000000000000000, 0.9819446635485992200, 1.000000000000000000), + ( 1.000000000000000000, 0.9802557317609270600, 1.000000000000000000), + ( 1.000000000000000000, 0.9762640100928912100, 1.000000000000000000), + ( 1.000000000000000000, 0.9739605502967296800, 1.000000000000000000), + ( 1.000000000000000000, 0.9688504898146810300, 1.000000000000000000), + ( 1.000000000000000000, 0.9660498235766021800, 1.000000000000000000), + ( 1.000000000000000000, 0.9601392851974792600, 1.000000000000000000), + ( 1.000000000000000000, 0.9570140055473296300, 1.000000000000000000), + ( 1.000000000000000000, 0.9471967819803283100, 1.000000000000000000), + ( 1.000000000000000000, 0.9400651080619507600, 1.000000000000000000), + ( 1.000000000000000000, 0.9286637506623934800, 1.000000000000000000), + ( 1.000000000000000000, 0.9247432650360487600, 1.000000000000000000), + ( 1.000000000000000000, 0.9167893306597061400, 1.000000000000000000), + ( 1.000000000000000000, 0.9127443459544408700, 1.000000000000000000), + ( 1.000000000000000000, 0.8922552563385380800, 1.000000000000000000), + ( 1.000000000000000000, 0.8750153015086115100, 1.000000000000000000), + ( 1.000000000000000000, 0.8536256169953228000, 1.000000000000000000), + ( 1.000000000000000000, 0.8493488310609194100, 1.000000000000000000), + ( 1.000000000000000000, 0.8409600549768390100, 1.000000000000000000), + ( 1.000000000000000000, 0.8368331120446258500, 1.000000000000000000), + ( 1.000000000000000000, 0.8246810503907707800, 1.000000000000000000), + ( 1.000000000000000000, 0.8168869556865021600, 1.000000000000000000), + ( 1.000000000000000000, 0.8094323569541326300, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#10973 = EDGE_CURVE ( 'NONE', #11167, #8914, #10385, .T. ) ; +#10972 = CARTESIAN_POINT ( 'NONE', ( 42.25085304658635000, -9.296912753055155000, -23.77035367523706800 ) ) ; +#10974 = CARTESIAN_POINT ( 'NONE', ( 32.25897296190255800, -30.61551897290265600, 27.63791555698035700 ) ) ; +#10975 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -39.52045731841470700, 19.79474689191102500 ) ) ; +#10976 = CARTESIAN_POINT ( 'NONE', ( 32.65371374435567000, -12.49999999999999600, -20.28383499213985900 ) ) ; +#10977 = CARTESIAN_POINT ( 'NONE', ( 0.1276847749373761200, 10.30553923381151500, -22.97446304501251300 ) ) ; +#10978 = CARTESIAN_POINT ( 'NONE', ( 13.56047759333194800, -30.81377308604420100, 27.87925658767604300 ) ) ; +#10979 = LINE ( 'NONE', #209, #7987 ) ; +#10980 = CARTESIAN_POINT ( 'NONE', ( 9.564320014112095000, -29.91724662126575000, 26.11739164449858200 ) ) ; +#10981 = CARTESIAN_POINT ( 'NONE', ( 17.89361848683375900, -94.74613901024022800, 18.64436139702410200 ) ) ; +#10982 = CARTESIAN_POINT ( 'NONE', ( 25.03437567152431200, -19.87369037688894100, 23.25900198739301300 ) ) ; +#10983 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10984 = CARTESIAN_POINT ( 'NONE', ( 5.315240498423210400, -29.24093927760328200, 21.69183228342211200 ) ) ; +#10985 = CARTESIAN_POINT ( 'NONE', ( 37.51422075789765400, -31.05213576424226900, 23.91455149096908200 ) ) ; +#10986 = CARTESIAN_POINT ( 'NONE', ( 34.59507465889043200, -16.97846787290478300, -26.23049217000021500 ) ) ; +#10987 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #803, #868, #1061, #787 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( -6.000000000607544400E-008, 0.004598945637198519800 ), + .UNSPECIFIED. ) ; +#10988 = CARTESIAN_POINT ( 'NONE', ( 34.13564097739315200, -30.22496418785956300, 26.86098521580726500 ) ) ; +#10989 = CARTESIAN_POINT ( 'NONE', ( 38.43575869189132300, -29.01677252191999300, 22.98779717412791300 ) ) ; +#10990 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 1, ( + ( #27, #8117 ), + ( #7133, #1034 ), + ( #8159, #2047 ), + ( #9174, #3056 ), + ( #10188, #4058 ), + ( #11204, #5091 ), + ( #12192, #6121 ), + ( #71, #7180 ), + ( #1080, #8204 ), + ( #2087, #9221 ), + ( #3093, #10230 ), + ( #4106, #11250 ), + ( #5129, #12234 ), + ( #6170, #116 ), + ( #7225, #1129 ), + ( #8254, #2129 ), + ( #9265, #3143 ), + ( #10271, #4153 ), + ( #11297, #5175 ), + ( #12275, #6214 ), + ( #161, #7269 ), + ( #1171, #8301 ), + ( #2171, #9306 ), + ( #3186, #10317 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 0.1249999999999997500, 0.1874999999999996100, 0.2499999999999995000, 0.3749999999999996700, 0.4374999999999994400, 0.4999999999999992200, 0.6249999999999994400, 0.6874999999999995600, 0.7499999999999995600, 0.8749999999999997800, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#10991 = ADVANCED_FACE ( 'NONE', ( #3177 ), #8034, .F. ) ; +#10992 = ORIENTED_EDGE ( 'NONE', *, *, #2035, .T. ) ; +#10993 = CARTESIAN_POINT ( 'NONE', ( 8.036593956671161700, -29.37692266936963700, 24.81253392254539500 ) ) ; +#10994 = CARTESIAN_POINT ( 'NONE', ( 9.775147506186248900, -20.20319999245228400, -23.47664214696443400 ) ) ; +#10995 = CARTESIAN_POINT ( 'NONE', ( 11.54820920609172500, -31.03769256493925600, 27.05046685403877000 ) ) ; +#10996 = CARTESIAN_POINT ( 'NONE', ( 9.559241856326025300, -17.86534499747134000, -24.40632851383044500 ) ) ; +#10997 = CARTESIAN_POINT ( 'NONE', ( 43.67306781510836800, 11.80207714697434400, -23.67306781510838900 ) ) ; +#10998 = EDGE_CURVE ( 'NONE', #3766, #7107, #5634, .T. ) ; +#10999 = CARTESIAN_POINT ( 'NONE', ( 38.54503180054510400, -28.99142003713775000, 22.80657181265448200 ) ) ; +#11000 = CARTESIAN_POINT ( 'NONE', ( 19.77438927370652200, -23.84020014801130200, -27.43932436959130400 ) ) ; +#11001 = CARTESIAN_POINT ( 'NONE', ( 36.10882187905610200, -29.98475266401190000, 25.73935493572613000 ) ) ; +#11002 = CARTESIAN_POINT ( 'NONE', ( 9.735660423465864400, -11.87344067773487000, 24.28459230472510900 ) ) ; +#11003 = CARTESIAN_POINT ( 'NONE', ( 34.78828106249518700, -23.55183866207291700, -23.71386026226157300 ) ) ; +#11004 = VERTEX_POINT ( 'NONE', #10051 ) ; +#11005 = CARTESIAN_POINT ( 'NONE', ( 14.44319719745861400, -7.501151285203646600, -32.27477001445893700 ) ) ; +#11006 = CARTESIAN_POINT ( 'NONE', ( 6.982471627637441000, -30.95522397176753100, 23.28524786635210500 ) ) ; +#11007 = VECTOR ( 'NONE', #1987, 1000.000000000000000 ) ; +#11008 = CARTESIAN_POINT ( 'NONE', ( 15.91847968843613400, -39.15315981854734400, 19.29429091335442700 ) ) ; +#11009 = CARTESIAN_POINT ( 'NONE', ( 10.59340883223576100, -99.99999999999997200, 19.96500264701634800 ) ) ; +#11010 = CARTESIAN_POINT ( 'NONE', ( 11.43037802419062200, -30.74185334765270400, 27.10143934029449800 ) ) ; +#11011 = EDGE_CURVE ( 'NONE', #2809, #4071, #3271, .T. ) ; +#11012 = CARTESIAN_POINT ( 'NONE', ( 6.185655351223338100, -19.66166816208166800, 14.00030406649423000 ) ) ; +#11013 = CARTESIAN_POINT ( 'NONE', ( 39.99920225794718200, -26.96646896279910900, 6.958411588215621000 ) ) ; +#11014 = CARTESIAN_POINT ( 'NONE', ( 32.09863200989554600, -10.00000000000003200, -24.99999999999999300 ) ) ; +#11015 = CARTESIAN_POINT ( 'NONE', ( 32.25990299093251700, -30.77649684382363700, 27.61743842787039000 ) ) ; +#11016 = EDGE_LOOP ( 'NONE', ( #7769, #13053, #311, #5668 ) ) ; +#11017 = CARTESIAN_POINT ( 'NONE', ( 14.13915079780889200, -38.80942609009378700, 18.72006599120648600 ) ) ; +#11018 = CARTESIAN_POINT ( 'NONE', ( 33.77035078748233600, -12.03468258274604000, -25.09257716205715400 ) ) ; +#11019 = CARTESIAN_POINT ( 'NONE', ( 10.03220454034422500, -20.32149963875677700, -23.67186603788616800 ) ) ; +#11020 = CARTESIAN_POINT ( 'NONE', ( 13.55966213204289200, -30.78692713119438600, 27.88355489393224200 ) ) ; +#11021 = CARTESIAN_POINT ( 'NONE', ( 9.807479012793550100, -30.93854176693775700, 26.16662710409149300 ) ) ; +#11022 = LINE ( 'NONE', #7061, #8352 ) ; +#11023 = CARTESIAN_POINT ( 'NONE', ( 11.03398184694714600, -15.76993983389408500, -24.99964931206786300 ) ) ; +#11024 = CARTESIAN_POINT ( 'NONE', ( 41.26348226684650200, -11.22007019923130300, -22.31540933697564500 ) ) ; +#11025 = CARTESIAN_POINT ( 'NONE', ( 37.69516453414711800, -97.43736317404419400, 18.98107255784862000 ) ) ; +#11026 = CARTESIAN_POINT ( 'NONE', ( 6.029067248849780300, -30.55409751767881200, 21.52806356267186400 ) ) ; +#11027 = CARTESIAN_POINT ( 'NONE', ( 37.73465399808557700, -29.90510995385552200, 24.59643550991078000 ) ) ; +#11028 = CARTESIAN_POINT ( 'NONE', ( 39.65736329636298800, -17.50681370254010000, -19.06517278555347900 ) ) ; +#11029 = EDGE_CURVE ( 'NONE', #3943, #5786, #11308, .T. ) ; +#11030 = CARTESIAN_POINT ( 'NONE', ( 34.16090684983458900, -30.73112573217747500, 26.82501836875803000 ) ) ; +#11031 = CARTESIAN_POINT ( 'NONE', ( 38.92250612221683800, -28.89198365616588000, 21.94051374424269700 ) ) ; +#11032 = VECTOR ( 'NONE', #7626, 1000.000000000000000 ) ; +#11033 = CARTESIAN_POINT ( 'NONE', ( 9.817496729349336700, -19.88136948324881800, -23.59621344812333300 ) ) ; +#11034 = CARTESIAN_POINT ( 'NONE', ( 8.129397427296924100, -30.63909193307387100, 25.16172828287318800 ) ) ; +#11035 = CARTESIAN_POINT ( 'NONE', ( 10.40654164667829200, -16.97949471221373200, -26.23067322947488800 ) ) ; +#11036 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -22.36781719137899300, -11.94938068502386700 ) ) ; +#11037 = CARTESIAN_POINT ( 'NONE', ( 10.03941572629563000, -20.33633501602386000, -23.67440655665425500 ) ) ; +#11038 = CARTESIAN_POINT ( 'NONE', ( 43.15436981964123200, 11.93493164662795200, -22.63087396392795000 ) ) ; +#11039 = CARTESIAN_POINT ( 'NONE', ( 39.40794121920071500, -29.78513674419817300, 22.71090107149571200 ) ) ; +#11040 = ORIENTED_EDGE ( 'NONE', *, *, #10953, .F. ) ; +#11041 = ORIENTED_EDGE ( 'NONE', *, *, #5459, .F. ) ; +#11042 = CARTESIAN_POINT ( 'NONE', ( 32.32171378888971700, -100.0000000000000300, -35.96519623375461800 ) ) ; +#11043 = DIRECTION ( 'NONE', ( 1.000000000000000000, 6.262484432840358700E-017, -3.551631410960780200E-016 ) ) ; +#11044 = VECTOR ( 'NONE', #1840, 1000.000000000000000 ) ; +#11045 = CARTESIAN_POINT ( 'NONE', ( 36.10883090728248100, -30.86562878366216700, 25.58404277167572300 ) ) ; +#11046 = EDGE_CURVE ( 'NONE', #8244, #8500, #514, .T. ) ; +#11047 = CARTESIAN_POINT ( 'NONE', ( 36.15584758290604100, -20.57290001584977500, -21.82534618004902800 ) ) ; +#11048 = AXIS2_PLACEMENT_3D ( 'NONE', #12874, #4798, #2761 ) ; +#11049 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.57596123493894400, 11.50239124669685300 ) ) ; +#11050 = CARTESIAN_POINT ( 'NONE', ( -1.152619503442582100, -7.694760993114756300, -11.53187062879840900 ) ) ; +#11051 = CARTESIAN_POINT ( 'NONE', ( 6.428124969556939100, -30.18682657842740700, 23.74103611974730700 ) ) ; +#11052 = CARTESIAN_POINT ( 'NONE', ( 6.827167980220477400, -26.07468731847497200, 14.40608941486853400 ) ) ; +#11053 = CARTESIAN_POINT ( 'NONE', ( 32.05525552032040800, -30.70342146056957600, 27.69912213523465300 ) ) ; +#11054 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11055 = CARTESIAN_POINT ( 'NONE', ( 11.44816095582996600, -30.32739798112310600, 27.13390149141494900 ) ) ; +#11056 = VERTEX_POINT ( 'NONE', #4008 ) ; +#11057 = ADVANCED_FACE ( 'NONE', ( #5876 ), #10990, .F. ) ; +#11058 = CARTESIAN_POINT ( 'NONE', ( 5.299902733837678100, -19.82724548885602200, 11.06640147667903300 ) ) ; +#11059 = CARTESIAN_POINT ( 'NONE', ( 44.15492000030462100, -7.781481582011400300, -21.43596316075118200 ) ) ; +#11060 = CARTESIAN_POINT ( 'NONE', ( 32.98035138152976500, -9.678028662481851900, -25.00000000000000000 ) ) ; +#11061 = CARTESIAN_POINT ( 'NONE', ( 32.25896961546722300, -30.92250847459567700, 27.58376209233916400 ) ) ; +#11062 = VECTOR ( 'NONE', #3616, 1000.000000000000000 ) ; +#11063 = CARTESIAN_POINT ( 'NONE', ( 6.495593628823032300, -33.74406517579015500, 12.27921047214862500 ) ) ; +#11064 = CARTESIAN_POINT ( 'NONE', ( 32.32171378888971700, -12.49999999999999600, -20.53658542176451000 ) ) ; +#11065 = CARTESIAN_POINT ( 'NONE', ( 17.31358660355953900, -23.89042830333037100, -27.20582375778407800 ) ) ; +#11066 = CARTESIAN_POINT ( 'NONE', ( 13.66313490239914700, -30.82370567759468500, 27.90838015448474300 ) ) ; +#11067 = CARTESIAN_POINT ( 'NONE', ( 9.781892214280311700, -30.27631701353496400, 26.32609602955511400 ) ) ; +#11068 = VERTEX_POINT ( 'NONE', #954 ) ; +#11069 = CARTESIAN_POINT ( 'NONE', ( 5.026778197746278200, -28.11394439347265000, 11.72876200534583000 ) ) ; +#11070 = CARTESIAN_POINT ( 'NONE', ( 30.20062793807072800, -94.74252659015759500, 18.14366083036108200 ) ) ; +#11071 = ORIENTED_EDGE ( 'NONE', *, *, #12226, .F. ) ; +#11072 = CARTESIAN_POINT ( 'NONE', ( 5.015620139215999800, -29.60562898719992100, 21.69598359228927700 ) ) ; +#11073 = CARTESIAN_POINT ( 'NONE', ( 37.52346654420075800, -30.90534994447348200, 24.21546063882194800 ) ) ; +#11074 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10253, #11280, #10199, #10150, #10103, #10059, #10023, #10009, #9976, #9959, #9930, #9915, #9887, #10802, #10708, #10630, #9874, #9845 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3.421875620869212600E-015, 0.001335322248310887400, 0.002002983372464622400, 0.002670644496618357800, 0.003338305620772093600, 0.004005966744925828200, 0.004339797307002706500, 0.004673627869079584800, 0.005341288993233341500 ), + .UNSPECIFIED. ) ; +#11075 = VERTEX_POINT ( 'NONE', #5221 ) ; +#11076 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999996400, -99.99999999999998600, 2.663723558220582600E-015 ) ) ; +#11077 = EDGE_CURVE ( 'NONE', #2635, #8668, #5563, .T. ) ; +#11078 = CARTESIAN_POINT ( 'NONE', ( 34.03037241976225900, -30.17251237542356900, 26.90184010365534900 ) ) ; +#11079 = ORIENTED_EDGE ( 'NONE', *, *, #11962, .F. ) ; +#11080 = AXIS2_PLACEMENT_3D ( 'NONE', #4680, #11808, #5725 ) ; +#11081 = CARTESIAN_POINT ( 'NONE', ( 9.556058863957069600, -19.47997726614634900, -23.50307456100139800 ) ) ; +#11082 = ORIENTED_EDGE ( 'NONE', *, *, #12822, .F. ) ; +#11083 = VERTEX_POINT ( 'NONE', #1210 ) ; +#11084 = CARTESIAN_POINT ( 'NONE', ( 8.260336422541415800, -29.65504818890528300, 25.17675672311873900 ) ) ; +#11085 = CARTESIAN_POINT ( 'NONE', ( 13.29224082595337600, -10.97571901653246600, -25.17204558820499500 ) ) ; +#11086 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11087 = CARTESIAN_POINT ( 'NONE', ( 24.85960462362701800, -27.96255689439421800, 27.45771657700752400 ) ) ; +#11088 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000900, 18.70000000000001000 ) ) ; +#11089 = VERTEX_POINT ( 'NONE', #8339 ) ; +#11090 = CARTESIAN_POINT ( 'NONE', ( 38.57220768554497400, -30.78225662840625200, 22.49187170301358300 ) ) ; +#11091 = CARTESIAN_POINT ( 'NONE', ( 31.30103478435171400, -100.0000000000000300, -36.66518970606523500 ) ) ; +#11092 = ORIENTED_EDGE ( 'NONE', *, *, #11984, .T. ) ; +#11093 = CARTESIAN_POINT ( 'NONE', ( 35.93837278963852800, -29.71130718998343700, 25.73148398032836300 ) ) ; +#11094 = CARTESIAN_POINT ( 'NONE', ( 39.54677210912325300, -17.97359856730832900, -18.73317002548534300 ) ) ; +#11095 = EDGE_CURVE ( 'NONE', #7598, #1695, #10979, .T. ) ; +#11096 = ORIENTED_EDGE ( 'NONE', *, *, #12561, .T. ) ; +#11097 = CARTESIAN_POINT ( 'NONE', ( 38.15446757497348100, -94.75143542371313300, 8.444143851991100300 ) ) ; +#11098 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000001800, -95.07596123493894400, 17.53844207640287000 ) ) ; +#11099 = CARTESIAN_POINT ( 'NONE', ( 1.281787485655497400, -7.786922583897225400, -21.43493977346610900 ) ) ; +#11100 = ADVANCED_FACE ( 'NONE', ( #2853 ), #934, .T. ) ; +#11101 = CARTESIAN_POINT ( 'NONE', ( 6.960887682132618400, -29.13568512789663200, 23.61916222202470500 ) ) ; +#11102 = CARTESIAN_POINT ( 'NONE', ( 5.118726982311526000, -28.38134424163924100, 15.78567252112945200 ) ) ; +#11103 = CARTESIAN_POINT ( 'NONE', ( 32.05506394712638500, -30.83117955882150000, 27.67783419728754200 ) ) ; +#11104 = PLANE ( 'NONE', #2776 ) ; +#11105 = CARTESIAN_POINT ( 'NONE', ( 11.53545048483843200, -30.88680295986299700, 27.10626561527551800 ) ) ; +#11106 = CARTESIAN_POINT ( 'NONE', ( 5.073906374488734300, -19.91391804098664400, 9.530646354019662400 ) ) ; +#11107 = CARTESIAN_POINT ( 'NONE', ( 40.00000058767501800, -29.65244644284219100, 21.61966353004115100 ) ) ; +#11108 = ORIENTED_EDGE ( 'NONE', *, *, #640, .F. ) ; +#11109 = CARTESIAN_POINT ( 'NONE', ( 33.52356881929501500, -10.85358023527839500, -25.05201378347073100 ) ) ; +#11110 = ORIENTED_EDGE ( 'NONE', *, *, #4740, .F. ) ; +#11111 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999996400, -27.19836366041661100, 6.839812882179702800 ) ) ; +#11112 = CARTESIAN_POINT ( 'NONE', ( 31.30103478435171400, -12.49999999999999600, -21.23657889407513000 ) ) ; +#11113 = CARTESIAN_POINT ( 'NONE', ( 17.40412409028408500, -20.85475758606175800, -26.68709420107837000 ) ) ; +#11114 = ORIENTED_EDGE ( 'NONE', *, *, #12735, .T. ) ; +#11115 = CARTESIAN_POINT ( 'NONE', ( 13.66277258876433400, -30.80801252406079300, 27.91104172504550700 ) ) ; +#11116 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #734, #7856, #1739, #8870, #2744, #9879, #3749, #10882, #4781, #11898, #5813, #12857, #6863, #778, #7897, #1778, #8919, #2787, #9920, #3793, #10932, #4823, #11942, #5857 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( -2.461485983451812200E-005, 0.002843471905573190800, 0.005711558670980900400, 0.008579645436388609600, 0.01001368881909246200, 0.01144773220179631800, 0.01431581896720402800, 0.01574986234990788700, 0.01718390573261174500, 0.02005199249801945000, 0.02148603588072330700, 0.02292007926342716500 ), + .UNSPECIFIED. ) ; +#11117 = EDGE_CURVE ( 'NONE', #963, #500, #11750, .T. ) ; +#11118 = CARTESIAN_POINT ( 'NONE', ( 10.03646917662409900, -31.13271628560877200, 26.17261885501375600 ) ) ; +#11119 = CARTESIAN_POINT ( 'NONE', ( 2.303013990192478700, -9.216686166851195200, 20.53939892371697300 ) ) ; +#11120 = CARTESIAN_POINT ( 'NONE', ( 33.32552960762804900, -15.89296508247279500, -24.99999999999998900 ) ) ; +#11121 = CARTESIAN_POINT ( 'NONE', ( 26.22143650459201000, -93.17319105009572400, 22.83432234656156400 ) ) ; +#11122 = CARTESIAN_POINT ( 'NONE', ( 6.060169439290081800, -28.87827873992916100, 21.82353685211802800 ) ) ; +#11123 = CARTESIAN_POINT ( 'NONE', ( 37.22974243049412000, -29.54589727151217100, 24.74976391639461000 ) ) ; +#11124 = CARTESIAN_POINT ( 'NONE', ( 25.00286862003091300, -28.77860031817825600, 29.18882610396487500 ) ) ; +#11125 = CIRCLE ( 'NONE', #10411, 5.000000000000000000 ) ; +#11126 = VECTOR ( 'NONE', #4348, 1000.000000000000000 ) ; +#11127 = CARTESIAN_POINT ( 'NONE', ( 34.06426729777467000, -30.62301141911612800, 26.89517242412199100 ) ) ; +#11128 = CARTESIAN_POINT ( 'NONE', ( 28.43860902669316800, -27.29338863714287600, 21.55958822569748500 ) ) ; +#11129 = CARTESIAN_POINT ( 'NONE', ( 8.983758575785701700, -18.71828333007425400, -23.29784730381161100 ) ) ; +#11130 = CARTESIAN_POINT ( 'NONE', ( 8.427606510108086400, -30.99388636493573300, 25.08361690488518300 ) ) ; +#11131 = CARTESIAN_POINT ( 'NONE', ( -2.168404344971008900E-015, -10.00001259917907400, 7.969484722636100700 ) ) ; +#11132 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -95.07596123493894400, 9.081879798262832500 ) ) ; +#11133 = EDGE_CURVE ( 'NONE', #3943, #11583, #2531, .T. ) ; +#11134 = CARTESIAN_POINT ( 'NONE', ( 38.85243386510640600, -29.51206773130239100, 23.20727117312119200 ) ) ; +#11135 = VECTOR ( 'NONE', #12471, 1000.000000000000000 ) ; +#11136 = EDGE_LOOP ( 'NONE', ( #2467, #2594, #3120, #3282 ) ) ; +#11137 = CARTESIAN_POINT ( 'NONE', ( 30.58116180380682500, -100.0000000000000300, -37.06069147054358800 ) ) ; +#11138 = CARTESIAN_POINT ( 'NONE', ( 36.07191888538536500, -30.57788921033262100, 25.77357181205476500 ) ) ; +#11139 = CARTESIAN_POINT ( 'NONE', ( 26.04477261766960100, -25.60470989783820200, 22.25067648625896400 ) ) ; +#11140 = CARTESIAN_POINT ( 'NONE', ( 39.51491899302094200, -22.77287331821402100, -15.90490801148258400 ) ) ; +#11141 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #2634, #12760, #5712, #7746 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.712388980384689700, 6.283185307179586200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#11142 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -95.78490438491259300, 4.330279031979113600 ) ) ; +#11143 = CARTESIAN_POINT ( 'NONE', ( 0.3304210487506075700, 10.75287675468449000, -22.93391579024984500 ) ) ; +#11144 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #9058, #9099, #10101 ), + ( #3977, #11128, #5009 ), + ( #12111, #6043, #13068 ), + ( #7094, #1003, #8127 ), + ( #2005, #9143, #3022 ), + ( #10148, #4018, #11172 ), + ( #5060, #12154, #6086 ), + ( #34, #7142, #1043 ), + ( #8169, #2055, #9184 ), + ( #3065, #10197, #4068 ), + ( #11213, #5101, #12199 ), + ( #6131, #79, #7190 ), + ( #1089, #8214, #2098 ), + ( #9232, #3104, #10240 ), + ( #4117, #11260, #5139 ), + ( #12246, #6182, #127 ), + ( #7233, #1138, #8265 ), + ( #2137, #9274, #3153 ), + ( #10282, #4163, #11307 ), + ( #5185, #12285, #6225 ), + ( #174, #7278, #1179 ), + ( #8310, #2180, #9315 ), + ( #3197, #10329, #4206 ), + ( #11348, #5231, #12327 ), + ( #6267, #220, #7327 ), + ( #1222, #8350, #2223 ), + ( #9363, #3236, #10373 ), + ( #4252, #11396, #5276 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.005286071154269789500, 0.007274071181799361200, 0.009262071209328932900, 0.01323807126438807400, 0.01423207127815286100, 0.01522607129191764500, 0.01721407131944721600, 0.01920207134697678900, 0.02119007137450635800, 0.02317807140203592700, 0.02516607142956549900, 0.02914207148462464500, 0.03311807153968378300, 0.03709407159474292800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7124524826746752000, 1.000000000000000000), + ( 1.000000000000000000, 0.7136336354709074100, 1.000000000000000000), + ( 1.000000000000000000, 0.7150281960525024500, 1.000000000000000000), + ( 1.000000000000000000, 0.7183657706360686600, 1.000000000000000000), + ( 1.000000000000000000, 0.7202879733960685400, 1.000000000000000000), + ( 1.000000000000000000, 0.7270037159966542500, 1.000000000000000000), + ( 1.000000000000000000, 0.7326612881348548700, 1.000000000000000000), + ( 1.000000000000000000, 0.7428954758585950600, 1.000000000000000000), + ( 1.000000000000000000, 0.7451080218551378000, 1.000000000000000000), + ( 1.000000000000000000, 0.7499415474728354800, 1.000000000000000000), + ( 1.000000000000000000, 0.7525707574037343600, 1.000000000000000000), + ( 1.000000000000000000, 0.7611262201849535700, 1.000000000000000000), + ( 1.000000000000000000, 0.7677391453472672800, 1.000000000000000000), + ( 1.000000000000000000, 0.7832128612552407000, 1.000000000000000000), + ( 1.000000000000000000, 0.7920943432028584300, 1.000000000000000000), + ( 1.000000000000000000, 0.8118161561890517900, 1.000000000000000000), + ( 1.000000000000000000, 0.8226343553762220900, 1.000000000000000000), + ( 1.000000000000000000, 0.8450883430138287400, 1.000000000000000000), + ( 1.000000000000000000, 0.8567498581520374100, 1.000000000000000000), + ( 1.000000000000000000, 0.8793576520603514400, 1.000000000000000000), + ( 1.000000000000000000, 0.8903452339140952600, 1.000000000000000000), + ( 1.000000000000000000, 0.9214914552203692400, 1.000000000000000000), + ( 1.000000000000000000, 0.9397946054281375300, 1.000000000000000000), + ( 1.000000000000000000, 0.9696078429282695100, 1.000000000000000000), + ( 1.000000000000000000, 0.9809614129671985200, 1.000000000000000000), + ( 1.000000000000000000, 0.9961754556868261900, 1.000000000000000000), + ( 1.000000000000000000, 1.000002345931306800, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#11145 = CARTESIAN_POINT ( 'NONE', ( 8.539034773588271700, -9.999999999999996400, -28.23356746606893000 ) ) ; +#11146 = CARTESIAN_POINT ( 'NONE', ( 6.639067961449318200, -30.52335104280875900, 23.72045658604319800 ) ) ; +#11147 = CARTESIAN_POINT ( 'NONE', ( 7.535560771536102800, -26.13499052900557700, 15.54679702744738500 ) ) ; +#11148 = CARTESIAN_POINT ( 'NONE', ( 31.74850167221304200, -30.72660476898738200, 27.79621603000921200 ) ) ; +#11149 = CARTESIAN_POINT ( 'NONE', ( 11.53544932902522500, -30.48553760659520500, 27.17702185270219700 ) ) ; +#11150 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999992000, -12.50000000000001100, 26.62899292861735400 ) ) ; +#11151 = CARTESIAN_POINT ( 'NONE', ( 10.03603537526767800, -12.49999999999999300, -17.94213895886130300 ) ) ; +#11152 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -97.57596123416667000, 12.92974142702268400 ) ) ; +#11153 = CARTESIAN_POINT ( 'NONE', ( 30.58116180380682500, -12.49999999999999600, -21.63208065855348400 ) ) ; +#11154 = CARTESIAN_POINT ( 'NONE', ( 17.16835162619257100, -18.04916640793641500, -27.93856584972344200 ) ) ; +#11155 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344969800, 27.93780948130441300 ) ) ; +#11156 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000004400, -99.99999999999998600, -25.63802908547508300 ) ) ; +#11157 = EDGE_CURVE ( 'NONE', #3580, #5041, #9423, .T. ) ; +#11158 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#11159 = AXIS2_PLACEMENT_3D ( 'NONE', #11575, #5468, #12542 ) ; +#11160 = CARTESIAN_POINT ( 'NONE', ( 9.956768302198970100, -30.50618908722152500, 26.42090146357152500 ) ) ; +#11161 = CARTESIAN_POINT ( 'NONE', ( 41.31439011054735700, -10.98988359540137300, -22.44667458951523600 ) ) ; +#11162 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11163 = CIRCLE ( 'NONE', #1649, 2.499999999999999100 ) ; +#11164 = CARTESIAN_POINT ( 'NONE', ( 5.076482262563275500, -29.95678326685470300, 21.69743004516545100 ) ) ; +#11165 = AXIS2_PLACEMENT_3D ( 'NONE', #3427, #6423, #11584 ) ; +#11166 = CARTESIAN_POINT ( 'NONE', ( 37.41023098405242600, -30.58718754943459600, 24.75662836235011400 ) ) ; +#11167 = VERTEX_POINT ( 'NONE', #4321 ) ; +#11168 = CARTESIAN_POINT ( 'NONE', ( 23.28286937980614400, -33.21268289846147300, 28.40697771038786000 ) ) ; +#11169 = ADVANCED_FACE ( 'NONE', ( #12949 ), #9484, .T. ) ; +#11170 = VECTOR ( 'NONE', #8149, 1000.000000000000000 ) ; +#11171 = CARTESIAN_POINT ( 'NONE', ( 34.03046489548514600, -31.08616128815554800, 26.74094286073872000 ) ) ; +#11172 = CARTESIAN_POINT ( 'NONE', ( 34.28792706192814400, -28.74795027108351100, 26.84943306682997000 ) ) ; +#11173 = CARTESIAN_POINT ( 'NONE', ( 25.83308573436432800, -12.49999999999999800, 22.05918254822885400 ) ) ; +#11174 = CARTESIAN_POINT ( 'NONE', ( 8.311343974897786400, -30.08339624119704300, 25.39173692859104700 ) ) ; +#11175 = CARTESIAN_POINT ( 'NONE', ( 9.839194024701074100, -10.85720267624896900, 24.84885204024180900 ) ) ; +#11176 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.819624696120023100, 8.006851498614445000 ) ) ; +#11177 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999999300, -8.819808196968011800, -11.57292781985991900 ) ) ; +#11178 = CARTESIAN_POINT ( 'NONE', ( 39.63785458394708200, -30.60274723833148500, 23.42221899302862900 ) ) ; +#11179 = EDGE_CURVE ( 'NONE', #8668, #7272, #7052, .T. ) ; +#11180 = CARTESIAN_POINT ( 'NONE', ( 38.64805430691077200, -30.64526189798170100, 22.96252549118530700 ) ) ; +#11181 = FACE_OUTER_BOUND ( 'NONE', #12135, .T. ) ; +#11182 = CARTESIAN_POINT ( 'NONE', ( 33.75580019096958800, -11.68911185983500400, -25.07869167535878300 ) ) ; +#11183 = CARTESIAN_POINT ( 'NONE', ( 35.74933748961503700, -29.69809977266898900, 25.84074807912433500 ) ) ; +#11184 = CARTESIAN_POINT ( 'NONE', ( 39.93775166404896000, -20.07274614506883400, -13.01891525204986700 ) ) ; +#11185 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -91.58528500545620000, -1.725079236344024600 ) ) ; +#11186 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000009200, -12.49999999999999600, 22.05918254822886100 ) ) ; +#11187 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11859, #2704, #8874, #2746, #9881, #3752, #10885, #4783, #11900, #5816, #12860, #6865 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.008897434149726516800, 0.01111818733206480600, 0.01333894051440309400, 0.01444931710557223800, 0.01555969369674138500, 0.01778044687907967500 ), + .UNSPECIFIED. ) ; +#11188 = CARTESIAN_POINT ( 'NONE', ( 19.11324289380028700, -20.86877381939299900, -26.92580718861960400 ) ) ; +#11189 = CARTESIAN_POINT ( 'NONE', ( 6.785078057530974100, -29.43732921578619300, 23.81633207517655700 ) ) ; +#11190 = CARTESIAN_POINT ( 'NONE', ( 6.262808111032311100, -23.03504911752945700, 13.64230238796017000 ) ) ; +#11191 = CARTESIAN_POINT ( 'NONE', ( 31.74729713875912300, -30.80580699073665900, 27.78426321000942800 ) ) ; +#11192 = CARTESIAN_POINT ( 'NONE', ( 11.74181339074243400, -30.99654037471094600, 27.15603272702653100 ) ) ; +#11193 = EDGE_CURVE ( 'NONE', #2052, #11068, #4633, .T. ) ; +#11194 = VECTOR ( 'NONE', #5833, 1000.000000000000000 ) ; +#11195 = CARTESIAN_POINT ( 'NONE', ( 30.58116180380682500, -100.0000000000000100, -37.06069147054358100 ) ) ; +#11196 = CARTESIAN_POINT ( 'NONE', ( 43.77887795048798100, -8.925747699534799300, 16.49364175393248300 ) ) ; +#11197 = CARTESIAN_POINT ( 'NONE', ( 9.148062279172700400, -11.61054454883733000, 24.15883868184987200 ) ) ; +#11198 = CARTESIAN_POINT ( 'NONE', ( 33.73854953133674400, -11.51728839548161600, -25.07218175804706900 ) ) ; +#11199 = CARTESIAN_POINT ( 'NONE', ( 17.87970373262022500, -23.89960443784755000, -27.30075188820296400 ) ) ; +#11200 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344970500, 27.93780948130441300 ) ) ; +#11201 = CARTESIAN_POINT ( 'NONE', ( 40.82472485402306700, -18.35055029195379100, -10.93908190985100000 ) ) ; +#11202 = CARTESIAN_POINT ( 'NONE', ( 44.92224777120617300, 10.13028869250943700, 0.7113565082297226300 ) ) ; +#11203 = CARTESIAN_POINT ( 'NONE', ( 10.04045443648274900, -29.91690862913141700, 26.38011801910431900 ) ) ; +#11204 = CARTESIAN_POINT ( 'NONE', ( 36.85586862908942200, -12.50000000000001100, 13.38305955200093700 ) ) ; +#11205 = CARTESIAN_POINT ( 'NONE', ( 38.28799367709280000, -7.463541018600210500, -24.99999999999999600 ) ) ; +#11206 = CARTESIAN_POINT ( 'NONE', ( 43.59902179141708000, -8.473868145884708300, 18.79551790172623900 ) ) ; +#11207 = CARTESIAN_POINT ( 'NONE', ( 5.988260266532580400, -28.91851050848996600, 21.87915717929766800 ) ) ; +#11208 = CIRCLE ( 'NONE', #7747, 3.189999999999995100 ) ; +#11209 = CARTESIAN_POINT ( 'NONE', ( 36.96301696001738400, -29.37684638141716700, 24.81266274649744500 ) ) ; +#11210 = CARTESIAN_POINT ( 'NONE', ( 6.050532363161184300, -28.87042587369011700, 21.75716330061473200 ) ) ; +#11211 = AXIS2_PLACEMENT_3D ( 'NONE', #406, #365, #332 ) ; +#11212 = CARTESIAN_POINT ( 'NONE', ( 33.86400801871800300, -30.51861884365295600, 26.99996476832263400 ) ) ; +#11213 = CARTESIAN_POINT ( 'NONE', ( 34.22104399463742700, -20.59989299604245300, 19.91512993087408700 ) ) ; +#11214 = VERTEX_POINT ( 'NONE', #5451 ) ; +#11215 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999998200, -99.99999999999998600, -6.100827442047402000 ) ) ; +#11216 = CARTESIAN_POINT ( 'NONE', ( 8.749616574986028200, -31.16171663205547700, 25.16870186743502600 ) ) ; +#11217 = CARTESIAN_POINT ( 'NONE', ( 43.07692213284238400, -7.589917725766152800, -22.76453746837010100 ) ) ; +#11218 = CARTESIAN_POINT ( 'NONE', ( 0.5307070303543950400, -11.05108544263374900, 8.434260933676787500 ) ) ; +#11219 = CARTESIAN_POINT ( 'NONE', ( 44.47300735769317000, -11.04330774026649200, -12.05964720114330600 ) ) ; +#11220 = CARTESIAN_POINT ( 'NONE', ( 35.39906155489622100, -31.95704532770448500, 23.90669425850980200 ) ) ; +#11221 = CARTESIAN_POINT ( 'NONE', ( 38.34525014474618100, -29.18762829283887300, 23.38376436196567500 ) ) ; +#11222 = CARTESIAN_POINT ( 'NONE', ( 33.60615846092729000, -11.00706446855923400, -25.05562865276469300 ) ) ; +#11223 = ORIENTED_EDGE ( 'NONE', *, *, #3722, .F. ) ; +#11224 = CARTESIAN_POINT ( 'NONE', ( 35.89383358694237800, -30.40819567216532300, 25.93225150519315000 ) ) ; +#11225 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.734723475976807600E-016 ) ) ; +#11226 = CARTESIAN_POINT ( 'NONE', ( 41.05200466693838700, -17.90126655165126800, -11.68084536788833600 ) ) ; +#11227 = AXIS2_PLACEMENT_3D ( 'NONE', #12538, #12412, #12438 ) ; +#11228 = EDGE_LOOP ( 'NONE', ( #11240, #11996, #12896, #152, #491, #789, #1083, #2018, #2627, #2659, #2955, #2979 ) ) ; +#11229 = CARTESIAN_POINT ( 'NONE', ( 6.063047072445690400, -28.86559229603670600, 21.75801711190083400 ) ) ; +#11230 = CARTESIAN_POINT ( 'NONE', ( 8.672199689099896200, -18.35849625061291200, -23.18573826439318000 ) ) ; +#11231 = CARTESIAN_POINT ( 'NONE', ( 5.106635454167253800, -20.11933289994484800, -13.64634858640485700 ) ) ; +#11232 = ADVANCED_FACE ( 'NONE', ( #10352 ), #12668, .F. ) ; +#11233 = CARTESIAN_POINT ( 'NONE', ( 7.061419414397533100, -30.88729744081324200, 23.65414827031876000 ) ) ; +#11234 = CARTESIAN_POINT ( 'NONE', ( 6.814028458215604500, -22.42834753501249500, 14.84964367996959900 ) ) ; +#11235 = CARTESIAN_POINT ( 'NONE', ( 31.74855581042228200, -30.87391082355733100, 27.77013102060634600 ) ) ; +#11236 = CARTESIAN_POINT ( 'NONE', ( 0.4792120989426101900, -7.162229968629703500, 16.87760827730053100 ) ) ; +#11237 = CARTESIAN_POINT ( 'NONE', ( 11.72872024911838700, -30.65129664922285400, 27.24733238509404000 ) ) ; +#11238 = CARTESIAN_POINT ( 'NONE', ( 37.08415707349907800, -100.0000000000000100, -28.92069478362982300 ) ) ; +#11239 = CARTESIAN_POINT ( 'NONE', ( 33.05950722189519600, -13.82322580823961300, 24.32586213666645800 ) ) ; +#11240 = ORIENTED_EDGE ( 'NONE', *, *, #10884, .F. ) ; +#11241 = ORIENTED_EDGE ( 'NONE', *, *, #7104, .F. ) ; +#11242 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#11243 = CARTESIAN_POINT ( 'NONE', ( 12.90136799010446500, -9.562556682370415100, -24.99999999999999600 ) ) ; +#11244 = CARTESIAN_POINT ( 'NONE', ( 17.95165736424171500, -20.85996344530703100, -26.77502242686912100 ) ) ; +#11245 = VERTEX_POINT ( 'NONE', #5494 ) ; +#11246 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238400 ) ) ; +#11247 = CARTESIAN_POINT ( 'NONE', ( 42.49999999999999300, 9.500000000000000000, 25.00000000000000400 ) ) ; +#11248 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -90.07596123493894400, 15.95758058754439400 ) ) ; +#11249 = CARTESIAN_POINT ( 'NONE', ( 10.34761363583735200, -30.68368966805038100, 26.59071352450816400 ) ) ; +#11250 = CARTESIAN_POINT ( 'NONE', ( 34.44337236086746400, -100.0000000000000300, 2.250973072611172300 ) ) ; +#11251 = CARTESIAN_POINT ( 'NONE', ( 2.222197385031628800, -10.16798905397901000, -20.66275261911624400 ) ) ; +#11252 = CARTESIAN_POINT ( 'NONE', ( 41.51480496510606600, -11.18111950802382600, 18.32702822093622100 ) ) ; +#11253 = ORIENTED_EDGE ( 'NONE', *, *, #12396, .F. ) ; +#11254 = CARTESIAN_POINT ( 'NONE', ( 5.560636463488923400, -30.35940143746859100, 21.73926217573195900 ) ) ; +#11255 = CARTESIAN_POINT ( 'NONE', ( 37.27866717612006700, -30.34886635235703500, 24.98987512736854200 ) ) ; +#11256 = VERTEX_POINT ( 'NONE', #10575 ) ; +#11257 = CARTESIAN_POINT ( 'NONE', ( 5.006229991081330200, -27.46389606112369800, 9.264321268210835600 ) ) ; +#11258 = EDGE_CURVE ( 'NONE', #11849, #4399, #2296, .T. ) ; +#11259 = CARTESIAN_POINT ( 'NONE', ( 33.84961274800098600, -30.98090022864710800, 26.88663486903844600 ) ) ; +#11260 = CARTESIAN_POINT ( 'NONE', ( 35.00556527518330100, -26.76021023298644900, 18.25982308916816500 ) ) ; +#11261 = CARTESIAN_POINT ( 'NONE', ( 2.050583512501233900, 10.60787792801391300, -24.74708243749382000 ) ) ; +#11262 = VERTEX_POINT ( 'NONE', #12562 ) ; +#11263 = CARTESIAN_POINT ( 'NONE', ( 8.557597825161753500, -30.37208048812476900, 25.56838632763983600 ) ) ; +#11264 = ORIENTED_EDGE ( 'NONE', *, *, #11781, .F. ) ; +#11265 = CARTESIAN_POINT ( 'NONE', ( 11.29768046848639300, -95.07596123493894400, 7.225344253356618100 ) ) ; +#11266 = CARTESIAN_POINT ( 'NONE', ( 46.06382506212307200, -7.859881674735627900, -12.99952066692843800 ) ) ; +#11267 = CARTESIAN_POINT ( 'NONE', ( 5.818302636734174000E-013, -9.874519872160334400, 9.702554146092154500 ) ) ; +#11268 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999087000, -9.799088879255457100, -13.61681266550784000 ) ) ; +#11269 = CARTESIAN_POINT ( 'NONE', ( 30.37167029947229600, -30.95112933279352400, 28.19049694220714000 ) ) ; +#11270 = VERTEX_POINT ( 'NONE', #12645 ) ; +#11271 = CARTESIAN_POINT ( 'NONE', ( 38.80415332747297400, -30.27300893707812800, 23.35274882719005900 ) ) ; +#11272 = CARTESIAN_POINT ( 'NONE', ( 29.44153720350376000, -100.0000000000000300, -37.54596735492514600 ) ) ; +#11273 = EDGE_CURVE ( 'NONE', #4830, #614, #4913, .T. ) ; +#11274 = CARTESIAN_POINT ( 'NONE', ( 35.75619899876365100, -31.15136482700786800, 25.59479491223434900 ) ) ; +#11275 = CARTESIAN_POINT ( 'NONE', ( 11.44058502976520800, -10.93177302441287100, -25.05404089595507200 ) ) ; +#11276 = CARTESIAN_POINT ( 'NONE', ( 39.99559420249745800, -22.32894074232127900, -11.57335986404688700 ) ) ; +#11277 = VERTEX_POINT ( 'NONE', #6528 ) ; +#11278 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.500000000000000000, -22.99999999999999600 ) ) ; +#11279 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#11280 = CARTESIAN_POINT ( 'NONE', ( 34.86594775237033900, -12.91863934611701700, -25.00000000000001100 ) ) ; +#11281 = CARTESIAN_POINT ( 'NONE', ( 34.09059745352956800, -17.52164896715815700, -24.79212668872956700 ) ) ; +#11282 = CARTESIAN_POINT ( 'NONE', ( 6.722893146857079400, -29.92036855677210000, 24.09432676913037600 ) ) ; +#11283 = CARTESIAN_POINT ( 'NONE', ( 15.12213864947593800, -33.12290826665324100, 27.89126696756856600 ) ) ; +#11284 = CARTESIAN_POINT ( 'NONE', ( 31.64468546090307300, -30.79551318611346000, 27.81882534639274600 ) ) ; +#11285 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -5.000000000016863800, 16.06938735382972900 ) ) ; +#11286 = CARTESIAN_POINT ( 'NONE', ( 11.84218428799490800, -31.01026711644547300, 27.19440054615445500 ) ) ; +#11287 = CARTESIAN_POINT ( 'NONE', ( 29.91956229780127800, -17.01909188948563700, 23.76234471981177900 ) ) ; +#11288 = DATE_TIME_ROLE ( 'creation_date' ) ; +#11289 = EDGE_LOOP ( 'NONE', ( #11573, #11582, #11716, #11738 ) ) ; +#11290 = CARTESIAN_POINT ( 'NONE', ( 29.44153720350376000, -12.49999999999999600, -22.11735654293503800 ) ) ; +#11291 = CARTESIAN_POINT ( 'NONE', ( 17.76525891290773300, -18.04987151822100000, -28.03603857931765100 ) ) ; +#11292 = CARTESIAN_POINT ( 'NONE', ( 44.47213146979886700, -11.05573706040219900, 8.005331014629273800 ) ) ; +#11293 = CARTESIAN_POINT ( 'NONE', ( 2.581042146191517200, -10.44433681824956400, 17.51123393264556300 ) ) ; +#11294 = CARTESIAN_POINT ( 'NONE', ( 42.49999999999999300, 9.500000000000000000, 22.50000000000000700 ) ) ; +#11295 = LINE ( 'NONE', #4101, #3478 ) ; +#11296 = CARTESIAN_POINT ( 'NONE', ( 10.39807366168159700, -30.06068366215229300, 26.60552416182985500 ) ) ; +#11297 = CARTESIAN_POINT ( 'NONE', ( 30.20916246864325700, -12.50000000000001100, 20.90845115923338700 ) ) ; +#11298 = ORIENTED_EDGE ( 'NONE', *, *, #9991, .T. ) ; +#11299 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122091300, -0.1736481776669239500 ) ) ; +#11300 = CARTESIAN_POINT ( 'NONE', ( 40.35933521848587400, -10.20413285901590300, 20.85820614003565200 ) ) ; +#11301 = CARTESIAN_POINT ( 'NONE', ( 5.560558023819713600, -29.14526171899800000, 21.95184563371211400 ) ) ; +#11302 = CARTESIAN_POINT ( 'NONE', ( 8.343828509952652800, -18.01237507300752600, -23.06837513076480000 ) ) ; +#11303 = CARTESIAN_POINT ( 'NONE', ( 36.96229288568510200, -31.12101264151557700, 24.50430447571128700 ) ) ; +#11304 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -40.82281865091663100, 27.18080503950259800 ) ) ; +#11305 = ADVANCED_FACE ( 'NONE', ( #2226 ), #3566, .T. ) ; +#11306 = CARTESIAN_POINT ( 'NONE', ( 33.75240424299578700, -30.34388273745372900, 27.04786337016485500 ) ) ; +#11307 = CARTESIAN_POINT ( 'NONE', ( 39.62658811197492500, -28.72652910257367900, 18.99678636992877000 ) ) ; +#11308 = CIRCLE ( 'NONE', #9133, 3.189999999999995100 ) ; +#11309 = CARTESIAN_POINT ( 'NONE', ( 8.750095359121047500, -29.56327556532178500, 25.44989972431798000 ) ) ; +#11310 = CARTESIAN_POINT ( 'NONE', ( 29.11679441725806000, -7.690981902354850200, -32.52745544033999900 ) ) ; +#11311 = CARTESIAN_POINT ( 'NONE', ( 1.457167719820518000E-013, -7.972221490132875000, 11.67379613883870300 ) ) ; +#11312 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -7.848335942922686200, -15.47245609879375300 ) ) ; +#11313 = CARTESIAN_POINT ( 'NONE', ( 25.73759800403671600, -33.16412371340779700, 28.41415409804121900 ) ) ; +#11314 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2454, #3788, #3331, #3267, #3237, #3221 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( -3.134210120432385100E-005, 0.001776890660343250700, 0.003585123421890825600 ), + .UNSPECIFIED. ) ; +#11315 = EDGE_CURVE ( 'NONE', #9810, #11583, #10030, .T. ) ; +#11316 = ADVANCED_FACE ( 'NONE', ( #7663 ), #13039, .T. ) ; +#11317 = CARTESIAN_POINT ( 'NONE', ( 38.01846030622040500, -29.11554605780445500, 23.61073955095327600 ) ) ; +#11318 = FACE_OUTER_BOUND ( 'NONE', #5544, .T. ) ; +#11319 = CARTESIAN_POINT ( 'NONE', ( 35.77605747127528700, -30.18136103857550600, 25.99369298322167400 ) ) ; +#11320 = EDGE_LOOP ( 'NONE', ( #11400, #12469 ) ) ; +#11321 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 9.500000000000000000, -22.50000000000000000 ) ) ; +#11322 = CARTESIAN_POINT ( 'NONE', ( 25.05762127725337900, -27.96664356551895400, 27.45669629599069600 ) ) ; +#11323 = CARTESIAN_POINT ( 'NONE', ( 34.84614270017474500, -19.69977762977537200, -23.93857304613947400 ) ) ; +#11324 = CARTESIAN_POINT ( 'NONE', ( 7.245676380082938900, -31.01082863425127600, 23.62553128463814300 ) ) ; +#11325 = CARTESIAN_POINT ( 'NONE', ( 16.88007728734473600, -31.98974796043853500, 20.80473854313712700 ) ) ; +#11326 = CARTESIAN_POINT ( 'NONE', ( 31.64576656781187200, -30.86029711846671100, 27.80620004409448900 ) ) ; +#11327 = CARTESIAN_POINT ( 'NONE', ( 39.83941113114360600, -7.722135492182757400, 25.00000000000000700 ) ) ; +#11328 = CARTESIAN_POINT ( 'NONE', ( 11.82850842526105200, -30.73513334685378200, 27.27520777385490200 ) ) ; +#11329 = CARTESIAN_POINT ( 'NONE', ( 26.94456483985827300, -18.79001216567837700, 23.45008369443531700 ) ) ; +#11330 = CARTESIAN_POINT ( 'NONE', ( 39.02435214554572700, -28.91143769703660000, 21.81814968529251800 ) ) ; +#11331 = EDGE_CURVE ( 'NONE', #7276, #8267, #1911, .T. ) ; +#11332 = CARTESIAN_POINT ( 'NONE', ( 29.04932301350859800, -100.0000000000000300, -37.69022306636186700 ) ) ; +#11333 = CARTESIAN_POINT ( 'NONE', ( 18.16580768076906700, -23.90337530209885800, -27.34004615578558300 ) ) ; +#11334 = CARTESIAN_POINT ( 'NONE', ( 44.44719225280224600, -10.94438718560638600, 9.819512058481446800 ) ) ; +#11335 = CARTESIAN_POINT ( 'NONE', ( 34.20594919819198800, -11.72083233327211500, -25.00000000000230900 ) ) ; +#11336 = EDGE_CURVE ( 'NONE', #1695, #9810, #197, .T. ) ; +#11337 = CARTESIAN_POINT ( 'NONE', ( 13.72937329422759900, -31.29892962639993600, 27.84384942420438600 ) ) ; +#11338 = CARTESIAN_POINT ( 'NONE', ( 10.55920285100975200, -30.90072311116693600, 26.62071362857608000 ) ) ; +#11339 = FACE_OUTER_BOUND ( 'NONE', #10290, .T. ) ; +#11340 = CARTESIAN_POINT ( 'NONE', ( 40.45207164690861400, -11.38369314205206000, -23.24707771939531000 ) ) ; +#11341 = CARTESIAN_POINT ( 'NONE', ( 39.90035463557232000, -10.00066165073928000, 25.85757985760043100 ) ) ; +#11342 = CARTESIAN_POINT ( 'NONE', ( 6.036502141612612800, -30.58775388505758700, 21.75948813782664400 ) ) ; +#11343 = CARTESIAN_POINT ( 'NONE', ( 25.03596310834423000, -27.96616264953000900, 27.45684688033683700 ) ) ; +#11344 = AXIS2_PLACEMENT_3D ( 'NONE', #3207, #9329, #5291 ) ; +#11345 = CARTESIAN_POINT ( 'NONE', ( 36.89084806523931800, -30.16259386848001300, 25.26966662622455600 ) ) ; +#11346 = ORIENTED_EDGE ( 'NONE', *, *, #3063, .T. ) ; +#11347 = CARTESIAN_POINT ( 'NONE', ( 33.76556882804604200, -30.79710127625114800, 26.99728546357222200 ) ) ; +#11348 = CARTESIAN_POINT ( 'NONE', ( 39.52360215706863800, -24.45289896584785100, 11.11231218450767100 ) ) ; +#11349 = CIRCLE ( 'NONE', #5333, 3.189999999999994200 ) ; +#11350 = CARTESIAN_POINT ( 'NONE', ( 8.659716686221450700, -30.58637709701523400, 25.57944765582241300 ) ) ; +#11351 = CARTESIAN_POINT ( 'NONE', ( 12.44166554576124500, -89.32382647200005000, 8.976239578193634800 ) ) ; +#11352 = CARTESIAN_POINT ( 'NONE', ( 37.56672083906806100, -9.999999999999996400, -27.39225757640761200 ) ) ; +#11353 = CARTESIAN_POINT ( 'NONE', ( 0.9949011276988674000, -7.769607306405864800, 17.45570041799387400 ) ) ; +#11354 = CARTESIAN_POINT ( 'NONE', ( 44.00967450424767700, -7.124657251817687600, -21.45377940479692600 ) ) ; +#11355 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -30.86101731591739400, 26.28307327246300700 ) ) ; +#11356 = EDGE_CURVE ( 'NONE', #10469, #6679, #10777, .T. ) ; +#11357 = CARTESIAN_POINT ( 'NONE', ( 38.57781951381069500, -30.04106097939388300, 23.77036535909334700 ) ) ; +#11358 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11695, #12578, #7679, #1569, #8704, #2568 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( -2.828427186328210900E-005, 0.007698214159632284900, 0.01542471259112785200 ), + .UNSPECIFIED. ) ; +#11359 = FACE_OUTER_BOUND ( 'NONE', #12003, .T. ) ; +#11360 = CARTESIAN_POINT ( 'NONE', ( 35.73963492389245300, -30.93040068148531000, 25.80629865428776500 ) ) ; +#11361 = CARTESIAN_POINT ( 'NONE', ( 19.39690202318662700, -97.51619941817645600, 22.06232990039168100 ) ) ; +#11362 = CARTESIAN_POINT ( 'NONE', ( 27.37806969471880300, -94.71799171673399100, 18.69741323346313400 ) ) ; +#11363 = CARTESIAN_POINT ( 'NONE', ( 24.85454854623587900, -33.43814961503964200, 28.48292143413002400 ) ) ; +#11364 = ADVANCED_FACE ( 'NONE', ( #4582 ), #8457, .F. ) ; +#11365 = CARTESIAN_POINT ( 'NONE', ( 6.773921702122611200, -30.20903236483605900, 24.16907776784847400 ) ) ; +#11366 = CARTESIAN_POINT ( 'NONE', ( 16.41773889442829300, -39.22755427998625800, 19.41490025252152000 ) ) ; +#11367 = CARTESIAN_POINT ( 'NONE', ( 31.43967145826846700, -30.79944508771820500, 27.88167507327169000 ) ) ; +#11368 = CARTESIAN_POINT ( 'NONE', ( 43.40520456156829700, -8.666998328938339200, -22.67564125397173000 ) ) ; +#11369 = CARTESIAN_POINT ( 'NONE', ( 11.84150167194600200, -30.40837726189103700, 27.30213950261680700 ) ) ; +#11370 = ORIENTED_EDGE ( 'NONE', *, *, #4577, .T. ) ; +#11371 = EDGE_CURVE ( 'NONE', #7479, #3452, #6040, .T. ) ; +#11372 = ORIENTED_EDGE ( 'NONE', *, *, #8934, .F. ) ; +#11373 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -5.000000000018942200, -19.35342349036124100 ) ) ; +#11374 = CARTESIAN_POINT ( 'NONE', ( 39.93254970092776500, -29.94472185235272100, 21.63656283251475200 ) ) ; +#11375 = CIRCLE ( 'NONE', #8463, 7.499999999999998200 ) ; +#11376 = CARTESIAN_POINT ( 'NONE', ( 33.46818705844500400, -10.78588080066447800, -25.05098410085390300 ) ) ; +#11377 = CARTESIAN_POINT ( 'NONE', ( 18.22800793012750700, -20.86209280696948200, -26.81137450581572400 ) ) ; +#11378 = ADVANCED_FACE ( 'NONE', ( #7019 ), #9414, .T. ) ; +#11379 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -97.57595292570682900, 13.49307748422565500 ) ) ; +#11380 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000144800, -29.42335303826715900, 21.65966884426562800 ) ) ; +#11381 = CARTESIAN_POINT ( 'NONE', ( 41.92351416992539700, -9.620129009363891400, 22.10629045630865300 ) ) ; +#11382 = CARTESIAN_POINT ( 'NONE', ( 10.55920566304829600, -30.30640226547064100, 26.72551781517574200 ) ) ; +#11383 = CARTESIAN_POINT ( 'NONE', ( 27.93368693112410400, -28.03492977301048900, 27.28352477699351700 ) ) ; +#11384 = CARTESIAN_POINT ( 'NONE', ( 0.5643058688626169100, -7.362066958053362400, -21.14206477072481500 ) ) ; +#11385 = CARTESIAN_POINT ( 'NONE', ( 35.08480128109552300, -12.33664350185631700, 24.08452338644997000 ) ) ; +#11386 = ORIENTED_EDGE ( 'NONE', *, *, #12653, .T. ) ; +#11387 = CARTESIAN_POINT ( 'NONE', ( 5.125083208068129900, -29.53471339472153200, 21.93502066393081800 ) ) ; +#11388 = CARTESIAN_POINT ( 'NONE', ( 17.22714000081815700, -33.32768944524571700, 28.33792997632119900 ) ) ; +#11389 = CARTESIAN_POINT ( 'NONE', ( 36.71549090015037100, -31.03062353371343800, 24.90493337483150400 ) ) ; +#11390 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6396, #1682, #2688, #9823, #3697, #10832, #4721, #11844, #5759, #12806, #6800, #719, #7841, #1724, #8857, #2732, #9866, #3736, #10871, #4766, #11885, #5800, #12844, #6850, #764, #7882 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001511427841992450700, 0.003022855683984901300, 0.006045711367969810500, 0.007557139209962265500, 0.009068567051954719600, 0.01209142273593962400, 0.01360285057793207300, 0.01511427841992452100, 0.01662570626191697100, 0.01813713410390941500, 0.02115998978789430600, 0.02418284547187919000 ), + .UNSPECIFIED. ) ; +#11391 = CIRCLE ( 'NONE', #10591, 1.200000000000006600 ) ; +#11392 = CARTESIAN_POINT ( 'NONE', ( 16.74166765707605400, -100.0000000000000100, 6.197625101945623900 ) ) ; +#11393 = CARTESIAN_POINT ( 'NONE', ( 30.28253805912608600, -19.18687900522739700, 22.41320007742281500 ) ) ; +#11394 = EDGE_CURVE ( 'NONE', #580, #1695, #12062, .T. ) ; +#11395 = CARTESIAN_POINT ( 'NONE', ( 33.54914012402353800, -30.30057031440697600, 27.13268372113747500 ) ) ; +#11396 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000002100, -27.09143239524033900, 6.754920151478382100 ) ) ; +#11397 = CARTESIAN_POINT ( 'NONE', ( 29.04932301350859800, -12.49999999999999600, -22.26161225437176200 ) ) ; +#11398 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#11399 = CARTESIAN_POINT ( 'NONE', ( 12.13023723667402200, -30.71100923720620600, 27.40199046825562200 ) ) ; +#11400 = ORIENTED_EDGE ( 'NONE', *, *, #6140, .T. ) ; +#11401 = CARTESIAN_POINT ( 'NONE', ( 8.783843500340577000, -29.71933705383213100, 25.56059188331540400 ) ) ; +#11402 = CARTESIAN_POINT ( 'NONE', ( 39.15592812320851800, -20.29327946528293200, -16.72853445784760500 ) ) ; +#11403 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -8.819488905067496300, -11.50144956258426600 ) ) ; +#11404 = CARTESIAN_POINT ( 'NONE', ( 40.16930520813890800, -7.601014390352038900, 25.00000000000000000 ) ) ; +#11405 = CARTESIAN_POINT ( 'NONE', ( 3.877382872141024200, -9.167647280323070200, -24.51436197652902700 ) ) ; +#11406 = ORIENTED_EDGE ( 'NONE', *, *, #3946, .F. ) ; +#11407 = CARTESIAN_POINT ( 'NONE', ( 38.01970270865349000, -30.95347197961401500, 23.28725951098880000 ) ) ; +#11408 = ORIENTED_EDGE ( 'NONE', *, *, #11962, .T. ) ; +#11409 = CARTESIAN_POINT ( 'NONE', ( 35.52457849325060800, -29.89529519701529400, 26.05855518373974900 ) ) ; +#11410 = CARTESIAN_POINT ( 'NONE', ( 6.256867239339293900, -97.42181713028699600, 18.37434326604851600 ) ) ; +#11411 = ORIENTED_EDGE ( 'NONE', *, *, #5693, .T. ) ; +#11412 = EDGE_CURVE ( 'NONE', #6296, #7479, #12370, .T. ) ; +#11413 = CARTESIAN_POINT ( 'NONE', ( 32.60903180879695600, -95.07596123493894400, 15.54089610449444000 ) ) ; +#11414 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999998900, -94.74682992296695300, 18.71443453778783800 ) ) ; +#11415 = CARTESIAN_POINT ( 'NONE', ( 29.08152031156584600, -39.15315981854337200, 19.29429091335448000 ) ) ; +#11416 = CARTESIAN_POINT ( 'NONE', ( 7.244579273435636700, -29.17984779902100500, 23.94931956265537200 ) ) ; +#11417 = CARTESIAN_POINT ( 'NONE', ( 18.26268801705184000, -32.08003161131646400, 21.03753419047822600 ) ) ; +#11418 = ORIENTED_EDGE ( 'NONE', *, *, #309, .F. ) ; +#11419 = CARTESIAN_POINT ( 'NONE', ( 31.43967206852962800, -30.83281604138634100, 27.87579066879857900 ) ) ; +#11420 = CARTESIAN_POINT ( 'NONE', ( 12.13172201459334000, -30.83141143337740400, 27.37691550577850200 ) ) ; +#11421 = EDGE_CURVE ( 'NONE', #8884, #3113, #3668, .T. ) ; +#11422 = CARTESIAN_POINT ( 'NONE', ( 44.82252229464516100, -6.355197513476788600, -19.89133217609189300 ) ) ; +#11423 = CARTESIAN_POINT ( 'NONE', ( 38.92649047122225200, -28.88518164651641800, 21.88527296792683400 ) ) ; +#11424 = EDGE_LOOP ( 'NONE', ( #4688, #5164, #5662, #5978 ) ) ; +#11425 = CARTESIAN_POINT ( 'NONE', ( 15.23701615962171000, -28.65067221269320200, 28.69625872814993200 ) ) ; +#11426 = CARTESIAN_POINT ( 'NONE', ( 18.06648952418674300, -18.05013747697861600, -28.07633341773095700 ) ) ; +#11427 = VERTEX_POINT ( 'NONE', #12919 ) ; +#11428 = CARTESIAN_POINT ( 'NONE', ( 19.98569428197027500, -27.96569314221766700, 27.45698461833224600 ) ) ; +#11429 = CARTESIAN_POINT ( 'NONE', ( 43.66073190072876300, -8.409387860342617300, 18.68936202907629300 ) ) ; +#11430 = CARTESIAN_POINT ( 'NONE', ( 0.02272341270698511100, -5.551679341919840900, -19.57324388401338300 ) ) ; +#11431 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11432 = CARTESIAN_POINT ( 'NONE', ( 6.176724239840963200, -30.66059900308779300, 21.91634668835377700 ) ) ; +#11433 = CARTESIAN_POINT ( 'NONE', ( 17.92928826067886000, -39.41424078495201400, 19.70383002183573100 ) ) ; +#11434 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999997900, -94.58996440013440600, 19.12511856848663800 ) ) ; +#11435 = CARTESIAN_POINT ( 'NONE', ( 36.61185466483301100, -29.80359913119542300, 25.34457036383098600 ) ) ; +#11436 = ORIENTED_EDGE ( 'NONE', *, *, #3819, .F. ) ; +#11437 = CARTESIAN_POINT ( 'NONE', ( 8.766058495799809300, -100.0000000000000100, -0.5025220806101592400 ) ) ; +#11438 = VERTEX_POINT ( 'NONE', #3907 ) ; +#11439 = CARTESIAN_POINT ( 'NONE', ( 33.50704913027514900, -19.28489224096213000, 20.67662419735061300 ) ) ; +#11440 = ADVANCED_FACE ( 'NONE', ( #1598 ), #1339, .T. ) ; +#11441 = EDGE_CURVE ( 'NONE', #7272, #5692, #9089, .T. ) ; +#11442 = ORIENTED_EDGE ( 'NONE', *, *, #392, .F. ) ; +#11443 = CARTESIAN_POINT ( 'NONE', ( 33.57016510659153100, -30.69658187038680500, 27.11082070108636800 ) ) ; +#11444 = CARTESIAN_POINT ( 'NONE', ( 28.25833234292395000, -100.0000000000000300, -37.93648162946810500 ) ) ; +#11445 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999997500, -94.54406934440207500, 19.57758955819930700 ) ) ; +#11446 = CARTESIAN_POINT ( 'NONE', ( 12.13863644847386200, -30.47351374158147400, 27.42184632474329900 ) ) ; +#11447 = CARTESIAN_POINT ( 'NONE', ( 8.907155593160311500, -30.92313832952181200, 25.55056801315043200 ) ) ; +#11448 = CARTESIAN_POINT ( 'NONE', ( 23.82311356408234500, -20.86556439143654300, -26.86893884239117400 ) ) ; +#11449 = CARTESIAN_POINT ( 'NONE', ( -3.909160860914474800E-014, -9.999011987848510000, -11.68151759810671700 ) ) ; +#11450 = CARTESIAN_POINT ( 'NONE', ( 36.72792991754759800, -10.52239654234034600, 25.00000000000000000 ) ) ; +#11451 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#11452 = ADVANCED_FACE ( 'NONE', ( #1288 ), #12127, .F. ) ; +#11453 = CARTESIAN_POINT ( 'NONE', ( 38.40106565875296200, -29.74853990080786700, 23.88331442494055100 ) ) ; +#11454 = CARTESIAN_POINT ( 'NONE', ( 5.189277438082129400, -95.07596123493893000, -2.472754691319602100 ) ) ; +#11455 = FACE_OUTER_BOUND ( 'NONE', #1290, .T. ) ; +#11456 = ORIENTED_EDGE ( 'NONE', *, *, #1467, .F. ) ; +#11457 = EDGE_CURVE ( 'NONE', #580, #10514, #972, .T. ) ; +#11458 = CARTESIAN_POINT ( 'NONE', ( 35.60987980844079500, -30.64398780799013600, 26.05941427200795200 ) ) ; +#11459 = CARTESIAN_POINT ( 'NONE', ( 14.86867011245678300, -32.98722133800549000, 25.92342224682841600 ) ) ; +#11460 = CARTESIAN_POINT ( 'NONE', ( 36.15843832266431000, -95.07596123493895800, 14.96379007072977500 ) ) ; +#11461 = CARTESIAN_POINT ( 'NONE', ( 0.3025551862408241100, 10.83537269980629600, -24.69744481375925800 ) ) ; +#11462 = CARTESIAN_POINT ( 'NONE', ( 33.84656860165498700, -32.49306459112484200, 26.40884949338995100 ) ) ; +#11463 = CARTESIAN_POINT ( 'NONE', ( 6.942712228452664100, -30.50508506461206400, 24.16374061752353300 ) ) ; +#11464 = CARTESIAN_POINT ( 'NONE', ( 18.67128944194978500, -33.40998945198094800, 28.48788683011466100 ) ) ; +#11465 = CARTESIAN_POINT ( 'NONE', ( 31.33711757668545400, -30.80801433131466600, 27.91106723207772700 ) ) ; +#11466 = CARTESIAN_POINT ( 'NONE', ( 15.31785151802704100, -31.01398849223931000, 28.30731093156296300 ) ) ; +#11467 = CIRCLE ( 'NONE', #2292, 2.499999999999998700 ) ; +#11468 = CARTESIAN_POINT ( 'NONE', ( 39.97575051933695500, -29.61575485357633000, 21.75796701760979300 ) ) ; +#11469 = ORIENTED_EDGE ( 'NONE', *, *, #1541, .F. ) ; +#11470 = CARTESIAN_POINT ( 'NONE', ( 33.66457470688868600, -11.17745566526537700, -25.06066857242188900 ) ) ; +#11471 = CARTESIAN_POINT ( 'NONE', ( 19.02190870089602700, -23.91211640168873800, -27.43183019329286400 ) ) ; +#11472 = CARTESIAN_POINT ( 'NONE', ( 25.06871119351226800, -19.87468203992582300, 23.25870727517081300 ) ) ; +#11473 = EDGE_CURVE ( 'NONE', #7779, #500, #3642, .T. ) ; +#11474 = CARTESIAN_POINT ( 'NONE', ( 29.18714977647125900, -94.74473939818703600, 18.43666970265458700 ) ) ; +#11475 = CARTESIAN_POINT ( 'NONE', ( 8.220810506940828600E-013, -5.244506741100378700, 16.25336689403769300 ) ) ; +#11476 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122092400, 0.1736481776669239200 ) ) ; +#11477 = FACE_OUTER_BOUND ( 'NONE', #6768, .T. ) ; +#11478 = CARTESIAN_POINT ( 'NONE', ( 5.141186614867783600, -29.90721151585508200, 22.02341808212807800 ) ) ; +#11479 = CARTESIAN_POINT ( 'NONE', ( 5.217288326520876900, -28.56885198389317200, 17.40315499756330200 ) ) ; +#11480 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999998600, -94.68648130466903000, 20.44522513542782600 ) ) ; +#11481 = CARTESIAN_POINT ( 'NONE', ( 36.67254619543111700, -30.71654129089800000, 25.26040967547411100 ) ) ; +#11482 = CARTESIAN_POINT ( 'NONE', ( 37.09446424253263800, -94.84296363196106900, 15.04998571841646000 ) ) ; +#11483 = CARTESIAN_POINT ( 'NONE', ( 36.26158760483602400, -19.42633551188566800, 18.17071616205706900 ) ) ; +#11484 = CARTESIAN_POINT ( 'NONE', ( 33.54908326087298300, -31.04594982802687800, 27.00112728983819500 ) ) ; +#11485 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -97.57596123493891600, 10.74919030742617600 ) ) ; +#11486 = CARTESIAN_POINT ( 'NONE', ( 28.25833234292395000, -12.49999999999999600, -22.50787081747799700 ) ) ; +#11487 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999998600, -94.87460690261258400, 20.85928444527440500 ) ) ; +#11488 = CARTESIAN_POINT ( 'NONE', ( 12.33299306224549400, -30.77992593887682900, 27.46735433279579300 ) ) ; +#11489 = CARTESIAN_POINT ( 'NONE', ( 8.863534017358290400, -30.11389613664376300, 25.75590745028250700 ) ) ; +#11490 = CARTESIAN_POINT ( 'NONE', ( 34.77917013055446200, -12.15687738288016300, 24.37627125095181300 ) ) ; +#11491 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11492 = EDGE_CURVE ( 'NONE', #9564, #4246, #11467, .T. ) ; +#11493 = EDGE_LOOP ( 'NONE', ( #10498, #1264, #4869, #10719, #10936, #11370 ) ) ; +#11494 = CARTESIAN_POINT ( 'NONE', ( 38.12481172064300900, -30.81649812350439500, 23.51380126530179400 ) ) ; +#11495 = CARTESIAN_POINT ( 'NONE', ( 5.730084519903803300, -89.80234706481415700, 0.4972597976211746200 ) ) ; +#11496 = FACE_BOUND ( 'NONE', #3276, .T. ) ; +#11497 = CARTESIAN_POINT ( 'NONE', ( 35.40329209680319900, -29.79495182002504800, 26.08823278426319400 ) ) ; +#11498 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -10.00000000000000000, 25.00000000000000000 ) ) ; +#11499 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999300, -95.43443845998484700, 21.53726769629901100 ) ) ; +#11500 = CARTESIAN_POINT ( 'NONE', ( 33.22519380946533800, -31.45604376314818000, 18.78051005901274800 ) ) ; +#11501 = ADVANCED_FACE ( 'NONE', ( #8777 ), #8474, .T. ) ; +#11502 = CARTESIAN_POINT ( 'NONE', ( 7.179961203614111800, -29.40707303008381900, 24.14894102010162800 ) ) ; +#11503 = CARTESIAN_POINT ( 'NONE', ( 40.00450586415055900, -19.98640919000194300, -11.46464493830142900 ) ) ; +#11504 = CARTESIAN_POINT ( 'NONE', ( 31.33675209104539800, -30.82371041932039500, 27.90840604353234500 ) ) ; +#11505 = CARTESIAN_POINT ( 'NONE', ( 10.59195095119009600, -32.21533968509015700, 26.54931510588215800 ) ) ; +#11506 = VECTOR ( 'NONE', #12790, 1000.000000000000100 ) ; +#11507 = CARTESIAN_POINT ( 'NONE', ( 38.95785171803900200, -30.56863179513872500, 21.58849288789487300 ) ) ; +#11508 = CARTESIAN_POINT ( 'NONE', ( 27.85929828834389700, -100.0000000000000300, -38.03890846183706700 ) ) ; +#11509 = CARTESIAN_POINT ( 'NONE', ( 19.05527780028765900, -20.86700841478544900, -26.89634892031324400 ) ) ; +#11510 = ADVANCED_FACE ( 'NONE', ( #3332 ), #9806, .F. ) ; +#11511 = CARTESIAN_POINT ( 'NONE', ( 14.78816050616153200, -94.74261830663283500, 18.15894733187265700 ) ) ; +#11512 = EDGE_CURVE ( 'NONE', #11277, #9810, #3011, .T. ) ; +#11513 = CARTESIAN_POINT ( 'NONE', ( 9.796162173108006900, -100.0000000000000100, -33.00341147329402200 ) ) ; +#11514 = CARTESIAN_POINT ( 'NONE', ( 30.60445208906168400, -12.51008527614341800, -25.44259575806313100 ) ) ; +#11515 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669238900, -0.9848077530122092400 ) ) ; +#11516 = CARTESIAN_POINT ( 'NONE', ( 11.05674809598025000, -12.72428144751572400, 24.51963567775948500 ) ) ; +#11517 = CARTESIAN_POINT ( 'NONE', ( 6.145815865756767400, -28.93521368704316600, 22.21906435223065700 ) ) ; +#11518 = FACE_OUTER_BOUND ( 'NONE', #8769, .T. ) ; +#11519 = CARTESIAN_POINT ( 'NONE', ( 19.19398289724957300, -32.11937065052145400, 21.11003699855874800 ) ) ; +#11520 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999300, -95.80543125211708900, 21.80032795718640800 ) ) ; +#11521 = CC_DESIGN_APPROVAL ( #10822, ( #10149 ) ) ; +#11522 = CARTESIAN_POINT ( 'NONE', ( 36.25787477320139400, -29.58467027981852500, 25.45748362704954800 ) ) ; +#11523 = CARTESIAN_POINT ( 'NONE', ( 38.44040306676757300, -19.61349970323522000, 14.85456410771374700 ) ) ; +#11524 = CARTESIAN_POINT ( 'NONE', ( 33.47010602070400900, -30.61622595762089800, 27.16687852411583400 ) ) ; +#11525 = CARTESIAN_POINT ( 'NONE', ( 28.50066813881424500, -20.01385634412569200, 22.81368892163532500 ) ) ; +#11526 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2461, #4454, #3485 ), + ( #10617, #4489, #11644 ), + ( #5539, #12601, #6571 ), + ( #512, #7620, #1505 ), + ( #8648, #2509, #9651 ), + ( #3524, #10657, #4536 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( 8.673617379884035500E-019, 0.001925352082381925200, 0.003850704164763849600 ), + ( 0.0000000000000000000, 0.6933306147913271800 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9294476088632731600, 0.9567274831701961800), + ( 1.000000000000000000, 0.9342064514998461600, 0.9596462658615215700), + ( 1.000000000000000000, 0.9386221866436874600, 0.9623546074251339000), + ( 1.000000000000000000, 0.9464159621656221800, 0.9671348321206663100), + ( 1.000000000000000000, 0.9497817264165275800, 0.9691991858278310400), + ( 1.000000000000000000, 0.9524130550057148300, 0.9708130816692872600) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#11527 = CARTESIAN_POINT ( 'NONE', ( 27.85929828834389700, -12.49999999999999600, -22.61029764984695900 ) ) ; +#11528 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -96.63045792889080600, 22.10430763399311300 ) ) ; +#11529 = CARTESIAN_POINT ( 'NONE', ( 12.33747533064416900, -30.53853049775314700, 27.49611313440454600 ) ) ; +#11530 = EDGE_CURVE ( 'NONE', #7930, #10514, #5717, .T. ) ; +#11531 = CARTESIAN_POINT ( 'NONE', ( 9.073696827933906300, -31.15124009475020700, 25.45953120352511700 ) ) ; +#11532 = LINE ( 'NONE', #2989, #423 ) ; +#11533 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999300, -19.87270537885227000, 23.25917566912282600 ) ) ; +#11534 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 1, ( + ( #9260, #11876 ), + ( #7353, #7743 ), + ( #7400, #7613 ), + ( #8848, #6565 ), + ( #6922, #4756 ), + ( #5614, #4844 ), + ( #4799, #4709 ), + ( #4407, #4232 ), + ( #4147, #4004 ), + ( #3317, #3135 ), + ( #3268, #3007 ), + ( #2808, #2455 ), + ( #2378, #2414 ), + ( #4100, #1909 ), + ( #1758, #1947 ), + ( #2206, #1715 ), + ( #1030, #709 ), + ( #672, #13052 ), + ( #387, #12970 ), + ( #12875, #12835 ), + ( #12796, #12758 ), + ( #12678, #12595 ), + ( #12521, #12484 ), + ( #12439, #12354 ), + ( #12311, #12271 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 1, 2, 2, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 0.1250000000000004200, 0.1875000000000006100, 0.2500000000000008300, 0.3750000000000010000, 0.4375000000000010000, 0.5000000000000010000, 0.6250000000000008900, 0.6875000000000007800, 0.7500000000000005600, 0.8125000000000004400, 0.8750000000000003300, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#11535 = EDGE_CURVE ( 'NONE', #11256, #7276, #364, .T. ) ; +#11536 = CARTESIAN_POINT ( 'NONE', ( 37.98287172005645100, -29.36385231485503400, 23.95858086655117000 ) ) ; +#11537 = VERTEX_POINT ( 'NONE', #10481 ) ; +#11538 = CARTESIAN_POINT ( 'NONE', ( 35.52265170210623800, -30.48249275521919100, 26.15544197503865600 ) ) ; +#11539 = CARTESIAN_POINT ( 'NONE', ( 32.87913522777962800, -95.07596123493894400, 15.43661663569800500 ) ) ; +#11540 = LINE ( 'NONE', #3122, #9166 ) ; +#11541 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669240300, 0.9848077530122092400 ) ) ; +#11542 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, -20.68999999999999400 ) ) ; +#11543 = CARTESIAN_POINT ( 'NONE', ( 36.32011125502520300, -36.41337521272909300, 15.11734417445016000 ) ) ; +#11544 = CARTESIAN_POINT ( 'NONE', ( 7.198066774784890300, -30.86722457507368500, 23.91251625228463200 ) ) ; +#11545 = CARTESIAN_POINT ( 'NONE', ( 40.99672713918053500, -17.94561468771766900, -10.09898052670869400 ) ) ; +#11546 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983000, 27.93782961424065500 ) ) ; +#11547 = CARTESIAN_POINT ( 'NONE', ( 6.968205166457282800, -31.01853905187692100, 22.20996445262455400 ) ) ; +#11548 = EDGE_CURVE ( 'NONE', #8884, #11167, #7477, .T. ) ; +#11549 = CARTESIAN_POINT ( 'NONE', ( 39.64093850921300100, -29.27364607187072900, 21.92970026137319200 ) ) ; +#11550 = ORIENTED_EDGE ( 'NONE', *, *, #12791, .T. ) ; +#11551 = CARTESIAN_POINT ( 'NONE', ( 26.65181345144134200, -100.0000000000000300, -38.28544755900109900 ) ) ; +#11552 = CARTESIAN_POINT ( 'NONE', ( 18.96882032344683500, -18.05070377481607800, -28.17057269559639800 ) ) ; +#11553 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #9842, #3677, #4739 ), + ( #11863, #5773, #12820 ), + ( #6821, #738, #7858 ), + ( #1744, #8877, #2748 ), + ( #9883, #3755, #10889 ), + ( #4785, #11903, #5819 ), + ( #12862, #6867, #784 ), + ( #7902, #1782, #8924 ), + ( #2793, #9925, #3797 ), + ( #10939, #4827, #11946 ), + ( #5863, #12901, #6906 ), + ( #826, #7949, #1825 ), + ( #8963, #2840, #9969 ), + ( #3842, #10986, #4873 ), + ( #11983, #5903, #12937 ), + ( #6953, #863, #7995 ), + ( #1874, #9006, #2884 ), + ( #10017, #3888, #11028 ), + ( #4921, #12029, #5948 ), + ( #12981, #7004, #912 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -2.828427186282782500E-005, 0.001988150890006565600, 0.004004586051875959300, 0.006021021213745352700, 0.008037456375614746000, 0.009045673956549442700, 0.01005389153748413900, 0.01207032669935353300, 0.01408676186122292600, 0.01610319702309231900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000), + ( 1.000000000000000000, 1.000012466898423800, 1.000000000000000000), + ( 1.000000000000000000, 0.9982760516799422700, 1.000000000000000000), + ( 1.000000000000000000, 0.9910966636647506900, 1.000000000000000000), + ( 1.000000000000000000, 0.9856415268482045000, 1.000000000000000000), + ( 1.000000000000000000, 0.9714156701633279700, 1.000000000000000000), + ( 1.000000000000000000, 0.9627169671018127600, 1.000000000000000000), + ( 1.000000000000000000, 0.9428806655250272500, 1.000000000000000000), + ( 1.000000000000000000, 0.9319018584262565000, 1.000000000000000000), + ( 1.000000000000000000, 0.9145300968035361400, 1.000000000000000000), + ( 1.000000000000000000, 0.9085630840042113700, 1.000000000000000000), + ( 1.000000000000000000, 0.8965155358671090800, 1.000000000000000000), + ( 1.000000000000000000, 0.8904365030181509200, 1.000000000000000000), + ( 1.000000000000000000, 0.8721499942481314400, 1.000000000000000000), + ( 1.000000000000000000, 0.8598570118976884800, 1.000000000000000000), + ( 1.000000000000000000, 0.8357590653124760100, 1.000000000000000000), + ( 1.000000000000000000, 0.8240811724008135800, 1.000000000000000000), + ( 1.000000000000000000, 0.8016949959872928800, 1.000000000000000000), + ( 1.000000000000000000, 0.7909823607796877500, 1.000000000000000000), + ( 1.000000000000000000, 0.7808140382005175400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#11554 = ORIENTED_EDGE ( 'NONE', *, *, #8873, .F. ) ; +#11555 = CARTESIAN_POINT ( 'NONE', ( 20.00816442509453100, -33.35180202424789500, 26.50734624027214500 ) ) ; +#11556 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6027, #7081, #3005, #10129, #4002, #11152 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.001039078685623543100, 0.002713667583492159400, 0.004388256481360776000 ), + .UNSPECIFIED. ) ; +#11557 = CARTESIAN_POINT ( 'NONE', ( 9.784520689918018400, -93.14125367204805200, 20.86462410617476900 ) ) ; +#11558 = CARTESIAN_POINT ( 'NONE', ( 39.98458388924695600, -29.59472963812149300, 21.62984059251692400 ) ) ; +#11559 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#11560 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11561 = CARTESIAN_POINT ( 'NONE', ( 13.70463276385745900, -15.76051461941068900, 23.98426584983238300 ) ) ; +#11562 = CARTESIAN_POINT ( 'NONE', ( 5.500932963180498600, -30.29291573787113400, 22.06930677069981400 ) ) ; +#11563 = CARTESIAN_POINT ( 'NONE', ( 18.95527082649130400, -39.49052192777116200, 19.80002530895953000 ) ) ; +#11564 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11565 = ORIENTED_EDGE ( 'NONE', *, *, #12168, .F. ) ; +#11566 = CARTESIAN_POINT ( 'NONE', ( 39.60571961659894700, -19.79975111925149300, 11.55356207558461900 ) ) ; +#11567 = ADVANCED_FACE ( 'NONE', ( #8134, #6031 ), #5434, .T. ) ; +#11568 = CARTESIAN_POINT ( 'NONE', ( 33.45716769268517500, -30.98179612085177200, 27.07273979557583100 ) ) ; +#11569 = ORIENTED_EDGE ( 'NONE', *, *, #8201, .T. ) ; +#11570 = CARTESIAN_POINT ( 'NONE', ( 26.65181345144134200, -12.49999999999999600, -22.85683674701099100 ) ) ; +#11571 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#11572 = CARTESIAN_POINT ( 'NONE', ( 12.74022077606345400, -30.85591457293382700, 27.60054670755653200 ) ) ; +#11573 = ORIENTED_EDGE ( 'NONE', *, *, #640, .T. ) ; +#11574 = CARTESIAN_POINT ( 'NONE', ( 8.923520394198426700, -30.38480986829189900, 25.81389378938614200 ) ) ; +#11575 = CARTESIAN_POINT ( 'NONE', ( 24.81280616483239900, -30.22505362207415700, 26.39521083043858600 ) ) ; +#11576 = ORIENTED_EDGE ( 'NONE', *, *, #3409, .T. ) ; +#11577 = CARTESIAN_POINT ( 'NONE', ( 31.60698979415938600, -28.94107132397799700, 28.18149539516975500 ) ) ; +#11578 = ADVANCED_FACE ( 'NONE', ( #25 ), #4438, .F. ) ; +#11579 = CARTESIAN_POINT ( 'NONE', ( 38.23552982294693700, -30.47812056281480200, 23.96333672475966400 ) ) ; +#11580 = CARTESIAN_POINT ( 'NONE', ( 35.40361272382021000, -31.16232123723835900, 25.84764238412091700 ) ) ; +#11581 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, 51.02052347080197600, 0.9909638431422930200 ) ) ; +#11582 = ORIENTED_EDGE ( 'NONE', *, *, #11157, .T. ) ; +#11583 = VERTEX_POINT ( 'NONE', #1416 ) ; +#11584 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11585 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -97.04531648070948800, 16.23785755017196300 ) ) ; +#11586 = CARTESIAN_POINT ( 'NONE', ( 39.79646588911208500, -29.30123510853222200, 17.08808682836057000 ) ) ; +#11587 = CARTESIAN_POINT ( 'NONE', ( 6.962241195198209300, -29.84214141085408700, 24.30177947931271400 ) ) ; +#11588 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342982300, 27.93782961424065500 ) ) ; +#11589 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 9.500000000000000000, 25.00000000000000400 ) ) ; +#11590 = EDGE_CURVE ( 'NONE', #12966, #4202, #10808, .T. ) ; +#11591 = AXIS2_PLACEMENT_3D ( 'NONE', #8498, #9501, #1360 ) ; +#11592 = CARTESIAN_POINT ( 'NONE', ( 39.33341054597865800, -30.41526712403888400, 21.72916359576043300 ) ) ; +#11593 = AXIS2_PLACEMENT_3D ( 'NONE', #5406, #12486, #6437 ) ; +#11594 = CARTESIAN_POINT ( 'NONE', ( 25.83308423735438500, -100.0000000000000300, -38.36942826376122900 ) ) ; +#11595 = CARTESIAN_POINT ( 'NONE', ( 19.59225251119383100, -23.91468923877196700, -27.45890358000784200 ) ) ; +#11596 = ORIENTED_EDGE ( 'NONE', *, *, #902, .F. ) ; +#11597 = PERSON_AND_ORGANIZATION ( #10194, #1109 ) ; +#11598 = CARTESIAN_POINT ( 'NONE', ( 44.90287534330132500, 10.19006527892301500, -17.85934566586511700 ) ) ; +#11599 = CARTESIAN_POINT ( 'NONE', ( 8.104045878057995400, -97.44693880714261500, 19.35402795020339900 ) ) ; +#11600 = CARTESIAN_POINT ( 'NONE', ( 39.97326281626910600, -28.11322739275725300, 11.72532574267245300 ) ) ; +#11601 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11602 = CARTESIAN_POINT ( 'NONE', ( 16.48890028165171600, -18.03205554980401000, 23.58373189602044900 ) ) ; +#11603 = CARTESIAN_POINT ( 'NONE', ( 5.796497397333661500, -29.13115002551035800, 22.27628609259469900 ) ) ; +#11604 = CARTESIAN_POINT ( 'NONE', ( 7.014220822693163300, -22.23763737398976300, 15.24622290821781000 ) ) ; +#11605 = CARTESIAN_POINT ( 'NONE', ( 10.86959415548732400, -31.06316962794996100, 26.70131849802074300 ) ) ; +#11606 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11607 = EDGE_LOOP ( 'NONE', ( #172, #290, #324 ) ) ; +#11608 = EDGE_CURVE ( 'NONE', #1970, #8001, #5401, .T. ) ; +#11609 = CARTESIAN_POINT ( 'NONE', ( 33.26493076638556100, -30.49421336864052300, 27.26035373707040000 ) ) ; +#11610 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000002100, -27.09143239524033200, 6.754920151478382100 ) ) ; +#11611 = CARTESIAN_POINT ( 'NONE', ( 25.83308423735438500, -12.49999999999999600, -22.94081745177112500 ) ) ; +#11612 = CIRCLE ( 'NONE', #3396, 2.500000000000002200 ) ; +#11613 = CARTESIAN_POINT ( 'NONE', ( 25.01430459056876600, -27.96569311835695600, 27.45698462481017500 ) ) ; +#11614 = EDGE_LOOP ( 'NONE', ( #12183, #12319, #12494, #12778 ) ) ; +#11615 = CARTESIAN_POINT ( 'NONE', ( 12.74021802036070900, -30.68359936216151600, 27.63092947807251000 ) ) ; +#11616 = CARTESIAN_POINT ( 'NONE', ( 9.081158936936507300, -29.65167392104220000, 25.71305815825298800 ) ) ; +#11617 = CARTESIAN_POINT ( 'NONE', ( 33.70736758518322800, -17.70291018518871700, -24.97257154873375700 ) ) ; +#11618 = CARTESIAN_POINT ( 'NONE', ( 35.28626936899849700, -28.37793501425519000, 24.59866868180363800 ) ) ; +#11619 = CARTESIAN_POINT ( 'NONE', ( 35.30271969825175700, -10.09097228155628100, 24.98395913226501700 ) ) ; +#11620 = CARTESIAN_POINT ( 'NONE', ( 37.75516502922538800, -29.17979016369761400, 23.94950916440776800 ) ) ; +#11621 = EDGE_CURVE ( 'NONE', #11857, #6161, #2684, .T. ) ; +#11622 = LINE ( 'NONE', #10805, #6203 ) ; +#11623 = CARTESIAN_POINT ( 'NONE', ( 35.22436240449568600, -30.32786302722615800, 26.32767736179242100 ) ) ; +#11624 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#11625 = CARTESIAN_POINT ( 'NONE', ( 2.025536954987478700, 10.30553923381153700, -24.87231522506261800 ) ) ; +#11626 = CARTESIAN_POINT ( 'NONE', ( 39.01434378367877500, -29.89055330658706600, 11.82621063157352600 ) ) ; +#11627 = ADVANCED_FACE ( 'NONE', ( #10512 ), #10186, .T. ) ; +#11628 = CARTESIAN_POINT ( 'NONE', ( 7.485551747195338600, -31.05206353328072000, 23.91438825220169700 ) ) ; +#11629 = CARTESIAN_POINT ( 'NONE', ( 20.09604506507653100, -27.96340410149441500, 27.45756719153433400 ) ) ; +#11630 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983000, 27.93782961424065500 ) ) ; +#11631 = CARTESIAN_POINT ( 'NONE', ( 24.92571990033178500, -33.35320614276254500, 26.50719967098571700 ) ) ; +#11632 = CARTESIAN_POINT ( 'NONE', ( 39.07168661717233200, -28.98286658556271400, 22.04119020787084400 ) ) ; +#11633 = VECTOR ( 'NONE', #10743, 1000.000000000000000 ) ; +#11634 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 9.723952627011016100, 15.80112425796745000 ) ) ; +#11635 = CARTESIAN_POINT ( 'NONE', ( 19.60634484423870600, -20.86845525333932000, -26.92140798804809500 ) ) ; +#11636 = ADVANCED_FACE ( 'NONE', ( #5069 ), #4741, .F. ) ; +#11637 = ORIENTED_EDGE ( 'NONE', *, *, #12470, .T. ) ; +#11638 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9269, #9496, #9455, #9249, #9225, #9203, #9185, #9156, #9144, #9101, #9061, #9012, #8995, #8929, #8915, #8883 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 5.204170427930421300E-018, 0.002113410071360021200, 0.004226820142720037200, 0.008453640285440083100, 0.01268046042816012600, 0.01479387049952014600, 0.01585057553520016100, 0.01690728057088017300 ), + .UNSPECIFIED. ) ; +#11639 = CARTESIAN_POINT ( 'NONE', ( 11.67447039237111600, -15.89296508247142000, -20.00000000000002800 ) ) ; +#11640 = CARTESIAN_POINT ( 'NONE', ( 2.465190328815661500E-030, -2.500000000000016400, 25.00000000000000000 ) ) ; +#11641 = CARTESIAN_POINT ( 'NONE', ( 39.98994129500722700, -27.72741353629566100, 9.861819824364026500 ) ) ; +#11642 = EDGE_CURVE ( 'NONE', #12504, #10335, #7508, .T. ) ; +#11643 = CARTESIAN_POINT ( 'NONE', ( 34.96243025749415500, -12.49999999999999600, -17.91053996251980300 ) ) ; +#11644 = CARTESIAN_POINT ( 'NONE', ( 34.12116478366525000, -17.10171784180794000, -24.82278460164278400 ) ) ; +#11645 = CARTESIAN_POINT ( 'NONE', ( 19.50898232718350300, -19.13162036953174900, 23.38984895126461400 ) ) ; +#11646 = CARTESIAN_POINT ( 'NONE', ( 6.177158262422608500, -30.66818252179737700, 22.32057608093375800 ) ) ; +#11647 = CARTESIAN_POINT ( 'NONE', ( 20.14545145376411400, -33.43814961503964200, 28.48292143413002400 ) ) ; +#11648 = CARTESIAN_POINT ( 'NONE', ( 10.83803296221452300, -30.55516117961112600, 26.85727548464813100 ) ) ; +#11649 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#11650 = CARTESIAN_POINT ( 'NONE', ( 18.68313378033968800, -95.07596123493894400, 15.95758058754439400 ) ) ; +#11651 = CARTESIAN_POINT ( 'NONE', ( 33.26894588516967100, -30.83080146812146400, 27.21038883326057300 ) ) ; +#11652 = CARTESIAN_POINT ( 'NONE', ( 39.30128450780934900, -31.76844042080021100, 10.54607940770227100 ) ) ; +#11653 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -12.49999999999999600, -22.94081745177113200 ) ) ; +#11654 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -97.08344081517951500, 22.14483981135568100 ) ) ; +#11655 = CARTESIAN_POINT ( 'NONE', ( 12.94431126785380200, -30.89438933252603200, 27.66316862829970400 ) ) ; +#11656 = CARTESIAN_POINT ( 'NONE', ( 9.109740433271614500, -30.59404756202578200, 25.89358806175462000 ) ) ; +#11657 = CARTESIAN_POINT ( 'NONE', ( 34.96779545965576100, -20.32149963875679400, -23.67186603788615800 ) ) ; +#11658 = CARTESIAN_POINT ( 'NONE', ( 39.70802441652499200, -31.50141451404636000, 23.18009611392370000 ) ) ; +#11659 = EDGE_CURVE ( 'NONE', #450, #7479, #5056, .T. ) ; +#11660 = CARTESIAN_POINT ( 'NONE', ( 38.22585668698064200, -30.20907472208198600, 24.16937480027732800 ) ) ; +#11661 = CARTESIAN_POINT ( 'NONE', ( 0.5280022327495820200, -11.02340367409787100, -12.42365463933736600 ) ) ; +#11662 = FACE_BOUND ( 'NONE', #8802, .T. ) ; +#11663 = CARTESIAN_POINT ( 'NONE', ( 35.17483284850209200, -31.01609973376776700, 26.12378615830087400 ) ) ; +#11664 = CARTESIAN_POINT ( 'NONE', ( 34.46792075924615500, -16.16525805968578300, -24.88363540020548500 ) ) ; +#11665 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -8.819645670697410000, 8.005330931324026600 ) ) ; +#11666 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000002100, -28.03045011216957500, 7.500406277439084900 ) ) ; +#11667 = CARTESIAN_POINT ( 'NONE', ( 7.052823722138902500, -30.16981514538999300, 24.47199814846343500 ) ) ; +#11668 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11669 = CARTESIAN_POINT ( 'NONE', ( 39.83889433404643700, -30.03626910716460000, 21.84694057696868400 ) ) ; +#11670 = LINE ( 'NONE', #1260, #6588 ) ; +#11671 = CARTESIAN_POINT ( 'NONE', ( 6.050532363161184300, -28.87042587369011700, 21.75716330061473200 ) ) ; +#11672 = CARTESIAN_POINT ( 'NONE', ( 19.57052124723949400, -18.05086771500700500, -28.19839924697502600 ) ) ; +#11673 = CARTESIAN_POINT ( 'NONE', ( 15.58476948152200600, -95.07596123493895800, 16.47927483829865000 ) ) ; +#11674 = CARTESIAN_POINT ( 'NONE', ( 20.06133793030467400, -30.66176281334875100, 28.85677374700786000 ) ) ; +#11675 = CARTESIAN_POINT ( 'NONE', ( 39.99376965687361700, -27.59971085080089300, 9.240444581331404400 ) ) ; +#11676 = EDGE_CURVE ( 'NONE', #4, #2040, #12802, .T. ) ; +#11677 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -12.50000000000000400, -22.94081745177113200 ) ) ; +#11678 = CARTESIAN_POINT ( 'NONE', ( 17.55762846134813400, -19.14332922520968000, 23.18504018718059700 ) ) ; +#11679 = CARTESIAN_POINT ( 'NONE', ( 10.77800718967514200, -18.14781908751266900, -24.64643551448325800 ) ) ; +#11680 = CARTESIAN_POINT ( 'NONE', ( 5.494717124727549700, -29.58504115231922800, 22.51082347740657100 ) ) ; +#11681 = CARTESIAN_POINT ( 'NONE', ( 7.788931563536939600, -26.17332215604742600, 15.91028189654864100 ) ) ; +#11682 = EDGE_LOOP ( 'NONE', ( #6665, #6777, #6919, #6933 ) ) ; +#11683 = CARTESIAN_POINT ( 'NONE', ( 10.96938976710126700, -31.08742267913172000, 26.74019127842598600 ) ) ; +#11684 = VECTOR ( 'NONE', #1705, 1000.000000000000100 ) ; +#11685 = CARTESIAN_POINT ( 'NONE', ( 0.004183734758264402400, -5.236480359617981000, -19.54149905406221800 ) ) ; +#11686 = ADVANCED_FACE ( 'NONE', ( #7178 ), #1746, .T. ) ; +#11687 = CARTESIAN_POINT ( 'NONE', ( 32.85969057907375700, -28.22210766081821700, 25.85386652111261100 ) ) ; +#11688 = CARTESIAN_POINT ( 'NONE', ( 33.15851758954217800, -30.40837681766484800, 27.30218391714101900 ) ) ; +#11689 = CARTESIAN_POINT ( 'NONE', ( 33.24547260897433200, -38.13051021660400200, 17.57871096529550000 ) ) ; +#11690 = CARTESIAN_POINT ( 'NONE', ( 33.41268978642839500, -10.71642395231830000, -25.04989504017437300 ) ) ; +#11691 = CARTESIAN_POINT ( 'NONE', ( 0.04244357350587613100, 10.08479207181835100, -24.95755642649406200 ) ) ; +#11692 = CARTESIAN_POINT ( 'NONE', ( 12.94477752686178300, -30.76264425218608500, 27.69055000347105600 ) ) ; +#11693 = EDGE_CURVE ( 'NONE', #11857, #1672, #2374, .T. ) ; +#11694 = CARTESIAN_POINT ( 'NONE', ( 9.232122245141205500, -29.75665150169153600, 25.85771779365826000 ) ) ; +#11695 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -23.91420473869548900, -27.45344971053349400 ) ) ; +#11696 = CARTESIAN_POINT ( 'NONE', ( 18.95529727288058200, -25.60470649840806000, 22.25067694787058400 ) ) ; +#11697 = CARTESIAN_POINT ( 'NONE', ( 2.749176373304368100, -9.296903253917030000, -23.77037062475967100 ) ) ; +#11698 = ADVANCED_FACE ( 'NONE', ( #9562 ), #2695, .F. ) ; +#11699 = CIRCLE ( 'NONE', #10680, 2.500000000000000000 ) ; +#11700 = CARTESIAN_POINT ( 'NONE', ( 37.75409039384929600, -31.01092318432828400, 23.62572230621824700 ) ) ; +#11701 = CARTESIAN_POINT ( 'NONE', ( 10.50592105382549600, -16.63655602679396100, -24.80432773142154800 ) ) ; +#11702 = CARTESIAN_POINT ( 'NONE', ( 2.602085213965210600E-015, -8.300336964502227100, -14.43609099217084000 ) ) ; +#11703 = CARTESIAN_POINT ( 'NONE', ( 34.99039228387805200, -30.06872329030851900, 26.40713090231406600 ) ) ; +#11704 = CARTESIAN_POINT ( 'NONE', ( 34.25692533817856100, -13.39205116879921300, -25.00000000000040100 ) ) ; +#11705 = ORIENTED_EDGE ( 'NONE', *, *, #12808, .T. ) ; +#11706 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11707 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1559, #8697, #594, #1604, #7709, #10749, #4629, #6717, #11767, #12729 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.2500000000000000000, 0.5000000000000000000, 0.7500000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#11708 = CARTESIAN_POINT ( 'NONE', ( 7.486528969079820700, -29.23717496330750300, 24.23349131562421000 ) ) ; +#11709 = ORIENTED_EDGE ( 'NONE', *, *, #10796, .F. ) ; +#11710 = CARTESIAN_POINT ( 'NONE', ( 13.56613091374212000, -30.83150405161668300, 27.89921777869505700 ) ) ; +#11711 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11712 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2723, #2765, #9900 ), + ( #3771, #10909, #4801 ), + ( #11921, #5837, #12878 ), + ( #6883, #800, #7919 ), + ( #1797, #8940, #2811 ), + ( #9943, #3817, #10958 ), + ( #4847, #11960, #5880 ), + ( #12916, #6925, #840 ), + ( #7965, #1844, #8981 ), + ( #2857, #9989, #3861 ), + ( #11002, #4890, #12000 ), + ( #5921, #12953, #6973 ), + ( #882, #8009, #1892 ), + ( #9026, #2902, #10034 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.002213500865097402300, 0.004427001730194804600, 0.005533752162743505600, 0.006640502595292207400, 0.007747253027840908400, 0.008854003460389609300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865470200, 1.000000000000000000), + ( 1.000000000000000000, 0.7362325146024001300, 1.000000000000000000), + ( 1.000000000000000000, 0.7635519667656149900, 1.000000000000000000), + ( 1.000000000000000000, 0.8146860343607469400, 1.000000000000000000), + ( 1.000000000000000000, 0.8385038226479762900, 1.000000000000000000), + ( 1.000000000000000000, 0.8699756287678578300, 1.000000000000000000), + ( 1.000000000000000000, 0.8797481894374240600, 1.000000000000000000), + ( 1.000000000000000000, 0.8975822431771450800, 1.000000000000000000), + ( 1.000000000000000000, 0.9056429282786758700, 1.000000000000000000), + ( 1.000000000000000000, 0.9196954982606383400, 1.000000000000000000), + ( 1.000000000000000000, 0.9257123014374787400, 1.000000000000000000), + ( 1.000000000000000000, 0.9356730981728259600, 1.000000000000000000), + ( 1.000000000000000000, 0.9395683941906841600, 1.000000000000000000), + ( 1.000000000000000000, 0.9423404994873674200, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#11713 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000012400, -94.86640441825186100, 13.78238935202147000 ) ) ; +#11714 = EDGE_CURVE ( 'NONE', #500, #11877, #391, .T. ) ; +#11715 = CARTESIAN_POINT ( 'NONE', ( 38.82471425417085700, -28.92385114961195600, 22.22331067154732400 ) ) ; +#11716 = ORIENTED_EDGE ( 'NONE', *, *, #10428, .T. ) ; +#11717 = DIRECTION ( 'NONE', ( -1.000000000000000000, 3.421138828918011400E-047, -9.860761315262647600E-032 ) ) ; +#11718 = CARTESIAN_POINT ( 'NONE', ( 20.17127704739682800, -18.05087151107530400, -28.19186261952225800 ) ) ; +#11719 = CARTESIAN_POINT ( 'NONE', ( 6.036473075320462700, -93.73150942637404600, 4.754781575989040800 ) ) ; +#11720 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11721 = DIRECTION ( 'NONE', ( 0.01909900421572659200, -0.9998175973836266300, 0.0000000000000000000 ) ) ; +#11722 = ORIENTED_EDGE ( 'NONE', *, *, #6664, .T. ) ; +#11723 = CARTESIAN_POINT ( 'NONE', ( 15.31556656900176000, -28.88618117369561500, 28.67220795628223600 ) ) ; +#11724 = CARTESIAN_POINT ( 'NONE', ( 34.74252531624659900, -19.13416689058139000, -24.15913777685519300 ) ) ; +#11725 = CARTESIAN_POINT ( 'NONE', ( 13.37308268534521200, -19.22059836475154200, 21.81618493069144500 ) ) ; +#11726 = CARTESIAN_POINT ( 'NONE', ( 6.453406368856128900, -30.79511564875511100, 22.48887904506281300 ) ) ; +#11727 = CARTESIAN_POINT ( 'NONE', ( 19.16663500514976800, -100.0000000000000100, -38.36942826376122900 ) ) ; +#11728 = CARTESIAN_POINT ( 'NONE', ( 10.93555464514210100, -30.68001643979089400, 26.88452249518896100 ) ) ; +#11729 = VERTEX_POINT ( 'NONE', #1655 ) ; +#11730 = EDGE_CURVE ( 'NONE', #1672, #8372, #6846, .T. ) ; +#11731 = CARTESIAN_POINT ( 'NONE', ( 33.17144414833334300, -30.73513483179265600, 27.27528004870940800 ) ) ; +#11732 = CARTESIAN_POINT ( 'NONE', ( 7.813297568924991100, -12.50000000000001100, 12.18989526689313200 ) ) ; +#11733 = CARTESIAN_POINT ( 'NONE', ( 44.15492000030769800, -7.781481582006808400, -21.43596316074798800 ) ) ; +#11734 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#11735 = CARTESIAN_POINT ( 'NONE', ( 13.25129813130640600, -30.87385896909838200, 27.77005979382549600 ) ) ; +#11736 = CARTESIAN_POINT ( 'NONE', ( 9.246476813505877200, -30.87624487792046300, 25.83646526498309000 ) ) ; +#11737 = CARTESIAN_POINT ( 'NONE', ( 5.000602458717973600, -11.25857148283629000, -23.71463393058760300 ) ) ; +#11738 = ORIENTED_EDGE ( 'NONE', *, *, #12450, .F. ) ; +#11739 = CARTESIAN_POINT ( 'NONE', ( 11.24641859694386300, -12.60694475807310900, -25.11721264035428500 ) ) ; +#11740 = CARTESIAN_POINT ( 'NONE', ( 38.09577010604029800, -29.96119075845026500, 24.29384514704734200 ) ) ; +#11741 = CARTESIAN_POINT ( 'NONE', ( -2.612336068023011700E-012, -8.073242491488098700, -17.91272614230143400 ) ) ; +#11742 = CARTESIAN_POINT ( 'NONE', ( 35.03283624031471500, -30.75405649765395600, 26.35990658830218100 ) ) ; +#11743 = CARTESIAN_POINT ( 'NONE', ( 44.12992518017934200, -8.751864501084867200, 15.89400052566492700 ) ) ; +#11744 = CARTESIAN_POINT ( 'NONE', ( 12.55653674457492200, -10.37798763555341200, -25.06442103296289400 ) ) ; +#11745 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#11746 = CARTESIAN_POINT ( 'NONE', ( 6.286318530829765500, -23.01028779185612500, -18.25348592121735400 ) ) ; +#11747 = CARTESIAN_POINT ( 'NONE', ( 7.230100712731681900, -30.44133567097746300, 24.53459034443438100 ) ) ; +#11748 = CARTESIAN_POINT ( 'NONE', ( 8.921817001906825700, -28.44686014199902500, 24.09836129720025600 ) ) ; +#11749 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999997900, -8.719215376762139900, -13.01790513354146800 ) ) ; +#11750 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12399, #5310, #6349, #297, #7404, #1299 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( -5.999999999322015800E-008, 0.001720303688688328900, 0.003440667377376650900 ), + .UNSPECIFIED. ) ; +#11751 = CARTESIAN_POINT ( 'NONE', ( 44.99911174217899700, -95.07596123493894400, -4.542352223618807200 ) ) ; +#11752 = EDGE_CURVE ( 'NONE', #10734, #4071, #4104, .T. ) ; +#11753 = FACE_OUTER_BOUND ( 'NONE', #466, .T. ) ; +#11754 = CARTESIAN_POINT ( 'NONE', ( 39.87466922744160800, -29.72704630428256000, 22.05538777524580500 ) ) ; +#11755 = EDGE_LOOP ( 'NONE', ( #13046, #130, #264 ) ) ; +#11756 = AXIS2_PLACEMENT_3D ( 'NONE', #8827, #2694, #9830 ) ; +#11757 = ADVANCED_FACE ( 'NONE', ( #9862 ), #3777, .F. ) ; +#11758 = CARTESIAN_POINT ( 'NONE', ( 2.602085213965209500E-015, -6.201862297754273900, 14.59902607319992600 ) ) ; +#11759 = CARTESIAN_POINT ( 'NONE', ( 18.39222611305548900, -28.81138946059306600, 29.17993193267955800 ) ) ; +#11760 = CARTESIAN_POINT ( 'NONE', ( 33.49656935089964800, -14.63282671344253700, -25.20306789620090600 ) ) ; +#11761 = VECTOR ( 'NONE', #6150, 1000.000000000000000 ) ; +#11762 = CARTESIAN_POINT ( 'NONE', ( 5.579174201608140000, -29.96001497333707400, 22.68045121413493000 ) ) ; +#11763 = CARTESIAN_POINT ( 'NONE', ( 7.450286742289237400, -21.88272629606908000, 16.02688330429215200 ) ) ; +#11764 = VERTEX_POINT ( 'NONE', #693 ) ; +#11765 = CARTESIAN_POINT ( 'NONE', ( 12.86537676327745300, -99.99999999999998600, 20.69663776835230000 ) ) ; +#11766 = CARTESIAN_POINT ( 'NONE', ( 10.96775282586305300, -30.18437410373368800, 26.90293700933005600 ) ) ; +#11767 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, -94.58996440013442000, 19.12511856848663800 ) ) ; +#11768 = EDGE_CURVE ( 'NONE', #6649, #11245, #6520, .T. ) ; +#11769 = CARTESIAN_POINT ( 'NONE', ( 41.05018658645033000, -17.89962682709925800, -11.53187062879840300 ) ) ; +#11770 = CARTESIAN_POINT ( 'NONE', ( 33.15783876531221400, -31.01025920189498900, 27.19445031291614300 ) ) ; +#11771 = CARTESIAN_POINT ( 'NONE', ( 13.69594383245338400, -12.50000000000000900, 20.32962423582673100 ) ) ; +#11772 = CARTESIAN_POINT ( 'NONE', ( 33.28376168285012700, -10.59583476889274900, -25.04895427945673000 ) ) ; +#11773 = CARTESIAN_POINT ( 'NONE', ( 24.99264576486652000, -27.96523496585091800, 27.45710953202297200 ) ) ; +#11774 = CARTESIAN_POINT ( 'NONE', ( 13.25254252229588500, -30.80578823621134500, 27.78418003422702000 ) ) ; +#11775 = LINE ( 'NONE', #5753, #9100 ) ; +#11776 = CARTESIAN_POINT ( 'NONE', ( 9.246474645289497500, -30.06118090538727500, 25.98019654741065000 ) ) ; +#11777 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#11778 = CARTESIAN_POINT ( 'NONE', ( 39.39594485314377400, -10.48903226599980900, 23.20457987218693000 ) ) ; +#11779 = CARTESIAN_POINT ( 'NONE', ( 5.178304504293059600, -9.652852389995832300, -24.39254288949708600 ) ) ; +#11780 = CARTESIAN_POINT ( 'NONE', ( 37.77783373390028700, -30.91276106089056000, 23.84675327008319500 ) ) ; +#11781 = EDGE_CURVE ( 'NONE', #8590, #8077, #1439, .T. ) ; +#11782 = CARTESIAN_POINT ( 'NONE', ( 34.59449874058519500, -30.01979875931552800, 26.59907521666786000 ) ) ; +#11783 = LINE ( 'NONE', #11132, #9109 ) ; +#11784 = CARTESIAN_POINT ( 'NONE', ( 10.91485124750143500, -10.39835501183734000, -24.99999999999999600 ) ) ; +#11785 = CARTESIAN_POINT ( 'NONE', ( 13.69328111231533500, -23.77675753851137600, -26.02680227363534000 ) ) ; +#11786 = ORIENTED_EDGE ( 'NONE', *, *, #5587, .T. ) ; +#11787 = CARTESIAN_POINT ( 'NONE', ( 7.513451359796146500, -29.41808780087677300, 24.44110480996668100 ) ) ; +#11788 = CARTESIAN_POINT ( 'NONE', ( 4.861686564097746000, -29.58712697336446200, 23.14186042258441100 ) ) ; +#11789 = CARTESIAN_POINT ( 'NONE', ( 43.11714943902539700, -8.913235524515570800, -23.07809305693367100 ) ) ; +#11790 = CARTESIAN_POINT ( 'NONE', ( 39.26991548009596000, -89.80234706481422800, 0.4972597976217768000 ) ) ; +#11791 = CARTESIAN_POINT ( 'NONE', ( 38.82654704020805500, -30.65931436327776500, 21.91671926926135700 ) ) ; +#11792 = CARTESIAN_POINT ( 'NONE', ( 2.465190328815661500E-030, -2.499999999999999100, -24.99999999999999600 ) ) ; +#11793 = CARTESIAN_POINT ( 'NONE', ( 20.15683310645710300, -20.86815979444002900, -26.91551822377079600 ) ) ; +#11794 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5824, #5654, #5637, #5605 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001258833537872535100 ), + .UNSPECIFIED. ) ; +#11795 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 12.00000000000000000, 22.50000000000000700 ) ) ; +#11796 = CARTESIAN_POINT ( 'NONE', ( 32.42907332414443300, -99.99999999999997200, 20.60128416911023000 ) ) ; +#11797 = CARTESIAN_POINT ( 'NONE', ( 10.03220454034423700, -20.32149963875684100, -23.67186603788615800 ) ) ; +#11798 = EDGE_CURVE ( 'NONE', #8372, #8895, #11905, .T. ) ; +#11799 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999600300, -97.04517183358908000, 16.23828164244108400 ) ) ; +#11800 = CARTESIAN_POINT ( 'NONE', ( 20.08001692427653900, -25.57032220009025300, 22.25479291871710400 ) ) ; +#11801 = CARTESIAN_POINT ( 'NONE', ( 6.451752046346729100, -28.99302092929069400, 22.80608516942960100 ) ) ; +#11802 = FACE_OUTER_BOUND ( 'NONE', #1839, .T. ) ; +#11803 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000700, -10.00000588258946300, 7.945110768723680800 ) ) ; +#11804 = CARTESIAN_POINT ( 'NONE', ( 11.13746688061424100, -30.82851831555728200, 26.94120672990969800 ) ) ; +#11805 = CARTESIAN_POINT ( 'NONE', ( 3.844629486347473300, -11.23571604708995300, -22.46755997374654600 ) ) ; +#11806 = CARTESIAN_POINT ( 'NONE', ( 38.40340667504982300, -8.797797531460240400, -24.94688432594924500 ) ) ; +#11807 = CARTESIAN_POINT ( 'NONE', ( 32.86946339044475700, -30.69075362799577500, 27.40517157369322000 ) ) ; +#11808 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#11809 = CARTESIAN_POINT ( 'NONE', ( 33.21039977963120300, -10.54495808333302700, -25.04910937026974700 ) ) ; +#11810 = CARTESIAN_POINT ( 'NONE', ( 13.25135162928989800, -30.72662666087057600, 27.79613125539722400 ) ) ; +#11811 = CARTESIAN_POINT ( 'NONE', ( 9.493540295536281100, -31.11818565630449000, 25.81419461673338500 ) ) ; +#11812 = CIRCLE ( 'NONE', #6279, 7.500000000000001800 ) ; +#11813 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 3.469446951953615200E-016, -1.000000000000000000 ) ) ; +#11814 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000001400, -97.04531648070947400, 16.23785755017195600 ) ) ; +#11815 = CARTESIAN_POINT ( 'NONE', ( 5.511898192444273400, -8.424685857654001400, -24.94996957358046400 ) ) ; +#11816 = EDGE_CURVE ( 'NONE', #8895, #3766, #11187, .T. ) ; +#11817 = ADVANCED_FACE ( 'NONE', ( #9241 ), #6655, .T. ) ; +#11818 = CARTESIAN_POINT ( 'NONE', ( 4.138360505872719300, -7.346822827177222200, 22.50000000000000400 ) ) ; +#11819 = CARTESIAN_POINT ( 'NONE', ( 37.87992195551741000, -29.53143997306825200, 24.21751531410280100 ) ) ; +#11820 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 9.500000000000000000, 22.50000000000000700 ) ) ; +#11821 = EDGE_CURVE ( 'NONE', #6128, #9730, #11295, .T. ) ; +#11822 = AXIS2_PLACEMENT_3D ( 'NONE', #9459, #12458, #320 ) ; +#11823 = CARTESIAN_POINT ( 'NONE', ( 34.65420243205729600, -30.61575127572293200, 26.60643674072324000 ) ) ; +#11824 = ORIENTED_EDGE ( 'NONE', *, *, #5020, .T. ) ; +#11825 = CARTESIAN_POINT ( 'NONE', ( 32.28438986050947100, -30.60869019964729500, 27.62794154353985800 ) ) ; +#11826 = VECTOR ( 'NONE', #4462, 1000.000000000000000 ) ; +#11827 = AXIS2_PLACEMENT_3D ( 'NONE', #4475, #11624, #5520 ) ; +#11828 = CARTESIAN_POINT ( 'NONE', ( 19.94237873759179900, -27.96664356504567900, 27.45669629622856800 ) ) ; +#11829 = CARTESIAN_POINT ( 'NONE', ( 7.710075468239163700, -30.84304529276972000, 24.58483211803666900 ) ) ; +#11830 = CARTESIAN_POINT ( 'NONE', ( 37.33032309391238400, -95.04933461967192400, 13.78296311307801700 ) ) ; +#11831 = CARTESIAN_POINT ( 'NONE', ( 41.59425478983883600, -10.00293073726416400, -22.86614729118476700 ) ) ; +#11832 = CARTESIAN_POINT ( 'NONE', ( 38.28186566508354400, -95.07596123493894400, 10.89148259895513400 ) ) ; +#11833 = CARTESIAN_POINT ( 'NONE', ( 39.59236636440054700, -29.39431584441583900, 22.22724311313849900 ) ) ; +#11834 = CARTESIAN_POINT ( 'NONE', ( 20.16221249436129500, -23.91413235334861700, -27.45254629393279100 ) ) ; +#11835 = VECTOR ( 'NONE', #97, 1000.000000000000000 ) ; +#11836 = CARTESIAN_POINT ( 'NONE', ( 36.43114599710924000, -30.57865126893837600, 25.51741036585583400 ) ) ; +#11837 = CARTESIAN_POINT ( 'NONE', ( 44.09157152587820900, -8.452784834690840300, 16.38149653183795700 ) ) ; +#11838 = EDGE_CURVE ( 'NONE', #5688, #1692, #11612, .T. ) ; +#11839 = CARTESIAN_POINT ( 'NONE', ( 44.09157152587820900, -8.452784834690842100, 16.38149653183794600 ) ) ; +#11840 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#11841 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11842 = CARTESIAN_POINT ( 'NONE', ( 6.086081534485931100, -30.36904334085132700, 23.06820850274875300 ) ) ; +#11843 = CARTESIAN_POINT ( 'NONE', ( 5.258428147136225300, -28.62632739756782700, 17.93744835361336200 ) ) ; +#11844 = CARTESIAN_POINT ( 'NONE', ( 31.30672087309894300, -23.77675744969274900, -26.02680135652682500 ) ) ; +#11845 = CARTESIAN_POINT ( 'NONE', ( 11.14489345078970400, -30.37778187570821600, 27.00429768519158800 ) ) ; +#11846 = CARTESIAN_POINT ( 'NONE', ( 20.14039537637302500, -27.96255689439421800, 27.45771657700752800 ) ) ; +#11847 = CARTESIAN_POINT ( 'NONE', ( 39.40258041782981000, -9.260264627399863000, -24.65519234204283100 ) ) ; +#11848 = CARTESIAN_POINT ( 'NONE', ( 32.86246551444595800, -30.96330992347263200, 27.33852334513907300 ) ) ; +#11849 = VERTEX_POINT ( 'NONE', #735 ) ; +#11850 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000900, 14.31000000000000900 ) ) ; +#11851 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11852 = CARTESIAN_POINT ( 'NONE', ( 34.88576150260724500, -13.36407974372234400, -25.00000000000005000 ) ) ; +#11853 = CARTESIAN_POINT ( 'NONE', ( 13.35500338599047200, -30.82948505066579200, 27.81254583262108300 ) ) ; +#11854 = EDGE_CURVE ( 'NONE', #1873, #4830, #805, .T. ) ; +#11855 = CARTESIAN_POINT ( 'NONE', ( 9.387280402878563000, -30.38449177489610200, 26.10911496220160200 ) ) ; +#11856 = CARTESIAN_POINT ( 'NONE', ( 44.09157152587821600, -7.873854980443964800, 18.11134077736177900 ) ) ; +#11857 = VERTEX_POINT ( 'NONE', #10224 ) ; +#11858 = CARTESIAN_POINT ( 'NONE', ( 35.66262828472148500, -17.38014697111976400, -29.60865546284226800 ) ) ; +#11859 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -5.000000000000002700, -19.35342349036134000 ) ) ; +#11860 = CARTESIAN_POINT ( 'NONE', ( 38.00401225591566900, -30.57568502195070400, 24.14311389785676100 ) ) ; +#11861 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1356, #1391, #1417, #1347 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001330694774650126300 ), + .UNSPECIFIED. ) ; +#11862 = ORIENTED_EDGE ( 'NONE', *, *, #13034, .T. ) ; +#11863 = CARTESIAN_POINT ( 'NONE', ( 25.30050936660432000, -23.32193283646370200, -27.34901619425452100 ) ) ; +#11864 = CARTESIAN_POINT ( 'NONE', ( 34.59434328155170100, -31.12752049655406600, 26.40346765614236400 ) ) ; +#11865 = CARTESIAN_POINT ( 'NONE', ( 33.64239509079039400, -30.27490382753720200, 27.08931960913569600 ) ) ; +#11866 = ORIENTED_EDGE ( 'NONE', *, *, #11854, .F. ) ; +#11867 = CARTESIAN_POINT ( 'NONE', ( 36.05466540928014800, -11.41793226646716500, -24.99999999999996100 ) ) ; +#11868 = VERTEX_POINT ( 'NONE', #8250 ) ; +#11869 = CARTESIAN_POINT ( 'NONE', ( 7.615156362343625100, -29.88939821664367400, 24.85287094968064300 ) ) ; +#11870 = CARTESIAN_POINT ( 'NONE', ( 6.103915577674627900, -30.60837917987825200, 21.70041860512656500 ) ) ; +#11871 = CARTESIAN_POINT ( 'NONE', ( 29.53775804390937100, -95.07596123493891600, 9.319683354836694600 ) ) ; +#11872 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, 9.500000000000000000, -25.00000000000000700 ) ) ; +#11873 = EDGE_CURVE ( 'NONE', #6820, #9688, #5865, .T. ) ; +#11874 = CARTESIAN_POINT ( 'NONE', ( 39.04743724201772900, -30.56395087518590300, 22.02818125279712900 ) ) ; +#11875 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#11876 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -100.0000000000000300, 6.630571736238754200 ) ) ; +#11877 = VERTEX_POINT ( 'NONE', #9261 ) ; +#11878 = CARTESIAN_POINT ( 'NONE', ( 36.16767244949380700, -29.58537223698563800, 25.51697003967554200 ) ) ; +#11879 = CARTESIAN_POINT ( 'NONE', ( 29.19896829415431200, -31.05989899415867600, 28.39355201408329100 ) ) ; +#11880 = CARTESIAN_POINT ( 'NONE', ( 24.82872287445837900, -18.05087151107581200, -28.19186261867199400 ) ) ; +#11881 = CARTESIAN_POINT ( 'NONE', ( 44.89950488392246800, -6.005537118727818100, 16.81156428135984300 ) ) ; +#11882 = CARTESIAN_POINT ( 'NONE', ( 10.91021400445909600, -95.07596123493895800, 15.98148681752452500 ) ) ; +#11883 = CARTESIAN_POINT ( 'NONE', ( 6.467112564523436200, -29.19726286314196900, 23.19228526577090600 ) ) ; +#11884 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#11885 = CARTESIAN_POINT ( 'NONE', ( 38.71368068214348300, -23.01028797380323000, -18.25348773603950600 ) ) ; +#11886 = CARTESIAN_POINT ( 'NONE', ( 11.24993079484479900, -31.00112906618895500, 26.92608240246533700 ) ) ; +#11887 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11888 = ORIENTED_EDGE ( 'NONE', *, *, #9025, .F. ) ; +#11890 = EDGE_CURVE ( 'NONE', #7479, #10132, #8843, .T. ) ; +#11889 = CARTESIAN_POINT ( 'NONE', ( 40.96498148918880800, -9.117006434063759100, -24.58416633521018500 ) ) ; +#11891 = CARTESIAN_POINT ( 'NONE', ( 32.66518497443193100, -30.62116155720221400, 27.49041051581435000 ) ) ; +#11892 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 7.000000000000000000, -18.70000000000000600 ) ) ; +#11893 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000900, 17.50000000000000400 ) ) ; +#11894 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -97.51638471114853200, 22.06850012136330700 ) ) ; +#11895 = CARTESIAN_POINT ( 'NONE', ( 13.35465009858484500, -30.76627425192952400, 27.82333348812747400 ) ) ; +#11896 = CARTESIAN_POINT ( 'NONE', ( 9.596720652449574700, -31.16440996083279200, 25.84625288299134000 ) ) ; +#11897 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, 19.48143887112370700 ) ) ; +#11898 = CARTESIAN_POINT ( 'NONE', ( 7.198678965881464700, -22.07892471847186400, 15.58833429149148800 ) ) ; +#11899 = CARTESIAN_POINT ( 'NONE', ( 35.87584989280667700, -100.0000000000000100, 0.2290708660672539900 ) ) ; +#11900 = CARTESIAN_POINT ( 'NONE', ( -7.703719777548953900E-031, -8.418882245222397000, -14.09603283134217100 ) ) ; +#11901 = CARTESIAN_POINT ( 'NONE', ( 37.53000301211008600, -29.26066207767492600, 24.24522919584961000 ) ) ; +#11902 = VERTEX_POINT ( 'NONE', #6209 ) ; +#11903 = CARTESIAN_POINT ( 'NONE', ( 29.25404869895941600, -20.73002314294785700, -26.89199258373090000 ) ) ; +#11904 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #8297, #9302, #10313, #4191 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.570796326794896600, 2.621177969715756500 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9101521891143576900, 0.9101521891143576900, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#11905 = LINE ( 'NONE', #8834, #8925 ) ; +#11906 = CARTESIAN_POINT ( 'NONE', ( 34.45531375718302100, -30.50054471872248400, 26.72050511524642100 ) ) ; +#11907 = CARTESIAN_POINT ( 'NONE', ( 35.81960649167693600, -29.67883619305212800, 25.78770198695533000 ) ) ; +#11908 = EDGE_LOOP ( 'NONE', ( #2138, #2198, #2338 ) ) ; +#11909 = CARTESIAN_POINT ( 'NONE', ( 2.015991671556890200, 10.14820631820833600, -24.92004164221552600 ) ) ; +#11910 = CARTESIAN_POINT ( 'NONE', ( 8.024854270612687300, -31.10265842134775500, 24.52153555079230400 ) ) ; +#11911 = CARTESIAN_POINT ( 'NONE', ( 19.09901501015886900, -23.61823471806106100, -27.40126221041481400 ) ) ; +#11912 = EDGE_CURVE ( 'NONE', #12196, #5939, #6191, .T. ) ; +#11913 = CARTESIAN_POINT ( 'NONE', ( 7.350211102300877800, -31.03045647101863800, 23.74901345218228600 ) ) ; +#11914 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000001400, -89.20772034660431900, 11.03354182248334000 ) ) ; +#11915 = CARTESIAN_POINT ( 'NONE', ( 44.99999998813465400, 9.795017894584663800, -24.99999998813308000 ) ) ; +#11916 = EDGE_CURVE ( 'NONE', #10757, #9688, #6463, .T. ) ; +#11917 = CARTESIAN_POINT ( 'NONE', ( 38.89631166215377800, -29.09382460719087100, 22.59781661360785800 ) ) ; +#11918 = VECTOR ( 'NONE', #5596, 1000.000000000000000 ) ; +#11919 = CARTESIAN_POINT ( 'NONE', ( 20.18719383516403500, -30.65917406624153000, 28.85723021296909600 ) ) ; +#11920 = CARTESIAN_POINT ( 'NONE', ( 36.35016755710193300, -30.38343489742340300, 25.62896585939991900 ) ) ; +#11921 = CARTESIAN_POINT ( 'NONE', ( 4.624579715329737400, -10.17176297220895800, 22.91178966402782500 ) ) ; +#11922 = CARTESIAN_POINT ( 'NONE', ( 27.68641444933583500, -23.89042828354584800, -27.20582355343857700 ) ) ; +#11923 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999889900, -4.999999999999990200, 16.06938735382971500 ) ) ; +#11924 = CARTESIAN_POINT ( 'NONE', ( 15.17592150164436600, -94.71789415301088900, 18.31665940589261200 ) ) ; +#11925 = CARTESIAN_POINT ( 'NONE', ( 6.599484165497496900, -30.76466752896800500, 23.12604398288201000 ) ) ; +#11926 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#11927 = CARTESIAN_POINT ( 'NONE', ( 43.39142894325954800, -8.678774094596457500, -22.70422423509965900 ) ) ; +#11928 = CARTESIAN_POINT ( 'NONE', ( 11.23248595307025400, -30.58241043860929100, 27.03875625592267100 ) ) ; +#11929 = EDGE_CURVE ( 'NONE', #3766, #2981, #505, .T. ) ; +#11930 = FACE_OUTER_BOUND ( 'NONE', #9743, .T. ) ; +#11931 = CARTESIAN_POINT ( 'NONE', ( 9.845129253267710800, -19.36095337016551100, 19.32889482166870100 ) ) ; +#11932 = CARTESIAN_POINT ( 'NONE', ( 2.738268670329610600, -10.66830788375087600, -21.13665968111142100 ) ) ; +#11933 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12420, #323, #7425, #1319 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001983894412344072600 ), + .UNSPECIFIED. ) ; +#11934 = CARTESIAN_POINT ( 'NONE', ( 40.32207284224566700, -11.35526494262153500, -23.38338085117066400 ) ) ; +#11935 = ORIENTED_EDGE ( 'NONE', *, *, #12545, .T. ) ; +#11936 = CARTESIAN_POINT ( 'NONE', ( 32.66518768994003400, -30.86652403405578200, 27.44714577019215100 ) ) ; +#11937 = CARTESIAN_POINT ( 'NONE', ( 32.97699181164904300, -10.42652655526809500, -25.05124896906106400 ) ) ; +#11938 = CARTESIAN_POINT ( 'NONE', ( 37.18060089618371900, -9.445798436362423400, -24.99999999999999600 ) ) ; +#11939 = CARTESIAN_POINT ( 'NONE', ( 13.55988400328738800, -30.84077289988518100, 27.87418558269201400 ) ) ; +#11940 = CARTESIAN_POINT ( 'NONE', ( 9.477978144187817500, -30.56853149984812400, 26.13889842572191900 ) ) ; +#11941 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, 15.51856112887630200 ) ) ; +#11942 = CARTESIAN_POINT ( 'NONE', ( 16.04077580714347600, -20.03888970696390700, 22.69752790005263100 ) ) ; +#11943 = CARTESIAN_POINT ( 'NONE', ( 26.65800171406234800, -100.0000000000000100, 6.546524093470333500 ) ) ; +#11944 = CARTESIAN_POINT ( 'NONE', ( 5.315241179226200400, -30.18028200536703300, 21.52620117954623800 ) ) ; +#11945 = CARTESIAN_POINT ( 'NONE', ( 37.94258338223585300, -30.30104821147678300, 24.44525016696362100 ) ) ; +#11946 = CARTESIAN_POINT ( 'NONE', ( 35.22683709070299300, -20.20226061882114600, -23.47507222594724400 ) ) ; +#11947 = EDGE_CURVE ( 'NONE', #5815, #8605, #3164, .T. ) ; +#11948 = CARTESIAN_POINT ( 'NONE', ( 34.42189270156318100, -31.03690244198598000, 26.55973007637647500 ) ) ; +#11949 = CARTESIAN_POINT ( 'NONE', ( 37.69721564855777300, -29.19066418392171500, 24.01473758006504500 ) ) ; +#11950 = CARTESIAN_POINT ( 'NONE', ( 7.724022896612005700, -30.22643815480822100, 25.00808674694544500 ) ) ; +#11951 = CARTESIAN_POINT ( 'NONE', ( 15.74720478512680400, -20.73096053808175300, -26.89215787177666100 ) ) ; +#11952 = CARTESIAN_POINT ( 'NONE', ( 9.509366963593196300, -31.16642685991497800, 25.78104357802060100 ) ) ; +#11953 = CARTESIAN_POINT ( 'NONE', ( 9.192537528576115900, -17.47231029371563000, -24.36266423262944900 ) ) ; +#11954 = CARTESIAN_POINT ( 'NONE', ( 44.74708243749380900, 10.60787792801393300, -22.94941648749877300 ) ) ; +#11955 = CARTESIAN_POINT ( 'NONE', ( 39.39890304948355700, -30.27247594780138200, 22.38738099310838300 ) ) ; +#11956 = VECTOR ( 'NONE', #7573, 1000.000000000000000 ) ; +#11957 = CARTESIAN_POINT ( 'NONE', ( 35.44203043902079700, -31.94460001862336200, 23.88295365730063900 ) ) ; +#11958 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11959 = CARTESIAN_POINT ( 'NONE', ( 36.16815051071903000, -31.16383940865882700, 25.23931812444680000 ) ) ; +#11960 = CARTESIAN_POINT ( 'NONE', ( 8.295595381730740000, -10.53856193760527500, 25.00000000000000400 ) ) ; +#11961 = CARTESIAN_POINT ( 'NONE', ( 30.25325452113174800, -20.81199307454303900, -25.95397308316108100 ) ) ; +#11962 = EDGE_CURVE ( 'NONE', #12468, #2167, #8620, .T. ) ; +#11963 = CARTESIAN_POINT ( 'NONE', ( 6.259307595722267700, -29.64568272988131500, 23.44178475440232000 ) ) ; +#11964 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -95.07596123493894400, 15.95758058754439400 ) ) ; +#11965 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000001400, -97.04531648070941700, 16.23785755017193800 ) ) ; +#11966 = CARTESIAN_POINT ( 'NONE', ( 11.45084089582268800, -31.04597212837588000, 27.00107649259065200 ) ) ; +#11967 = CARTESIAN_POINT ( 'NONE', ( 7.590173072302977000, -19.51228039758616400, 16.64734334334050200 ) ) ; +#11968 = CARTESIAN_POINT ( 'NONE', ( 37.80143173523340700, -22.07901619476961100, 15.58813426227224000 ) ) ; +#11969 = CARTESIAN_POINT ( 'NONE', ( 41.45096208917129100, -10.05884845713822700, -22.99731383458690500 ) ) ; +#11970 = CARTESIAN_POINT ( 'NONE', ( 32.25912082290409400, -30.62648384371325600, 27.63701485917537300 ) ) ; +#11971 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000003600, -95.07596123493894400, 11.50239124669686300 ) ) ; +#11972 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 9.024562509492795200E-015, -24.99999999999999600 ) ) ; +#11973 = CARTESIAN_POINT ( 'NONE', ( 2.003223048039878900, 9.827245291872296600, -24.98388475980063100 ) ) ; +#11974 = CARTESIAN_POINT ( 'NONE', ( 13.56044858931903700, -30.81021179882536400, 27.87986634660361000 ) ) ; +#11975 = CARTESIAN_POINT ( 'NONE', ( 9.591072877750367100, -29.81450711198943500, 26.09320400229883700 ) ) ; +#11976 = VERTEX_POINT ( 'NONE', #10402 ) ; +#11977 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999998900, -94.74682992296695300, 18.71443453778783800 ) ) ; +#11978 = CARTESIAN_POINT ( 'NONE', ( 24.90381445815979700, -27.98820205139886100, 27.51092105109950800 ) ) ; +#11979 = EDGE_CURVE ( 'NONE', #5206, #3116, #4066, .T. ) ; +#11980 = CARTESIAN_POINT ( 'NONE', ( 5.618508689338627300, -29.05971190298255600, 21.72378770361896700 ) ) ; +#11981 = LINE ( 'NONE', #1665, #11684 ) ; +#11982 = CARTESIAN_POINT ( 'NONE', ( 37.51224086898611200, -31.05427430617042400, 23.91231831681842500 ) ) ; +#11983 = CARTESIAN_POINT ( 'NONE', ( 29.96100988180796800, -13.79173187717253200, -25.66858463355784200 ) ) ; +#11984 = EDGE_CURVE ( 'NONE', #11245, #2182, #2841, .T. ) ; +#11985 = CARTESIAN_POINT ( 'NONE', ( 34.14613928963638000, -30.31932583418115000, 26.86657204980243900 ) ) ; +#11986 = CARTESIAN_POINT ( 'NONE', ( 38.50499693434572600, -29.00074016923806400, 22.87255519125078300 ) ) ; +#11987 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3373, #3759, #3496, #3367 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.004719211164662191100 ), + .UNSPECIFIED. ) ; +#11988 = AXIS2_PLACEMENT_3D ( 'NONE', #8544, #9554, #3424 ) ; +#11989 = CARTESIAN_POINT ( 'NONE', ( 8.038067546849548600, -29.37419847715919000, 24.81134511509295100 ) ) ; +#11990 = ORIENTED_EDGE ( 'NONE', *, *, #11590, .F. ) ; +#11991 = CARTESIAN_POINT ( 'NONE', ( 16.42624644804243800, -16.43097436285149000, -26.13395429241510100 ) ) ; +#11992 = CARTESIAN_POINT ( 'NONE', ( 11.84218428799490800, -31.01026711644547300, 27.19440054615445500 ) ) ; +#11993 = CARTESIAN_POINT ( 'NONE', ( 11.20344192265741300, -17.59456346122584900, -24.83457758542015600 ) ) ; +#11994 = CARTESIAN_POINT ( 'NONE', ( 42.80499488521898100, 11.48776909978549900, -24.02497442609470500 ) ) ; +#11995 = CARTESIAN_POINT ( 'NONE', ( 38.54805304672324000, -28.99299372914313700, 22.80645317693027600 ) ) ; +#11996 = ORIENTED_EDGE ( 'NONE', *, *, #8279, .T. ) ; +#11997 = CARTESIAN_POINT ( 'NONE', ( 19.21026656365513200, -23.65575889653045700, -27.39273011124455700 ) ) ; +#11998 = CARTESIAN_POINT ( 'NONE', ( 36.14705862727419100, -30.17717599779359400, 25.76031255172110700 ) ) ; +#11999 = EDGE_CURVE ( 'NONE', #2635, #2959, #5550, .T. ) ; +#12000 = CARTESIAN_POINT ( 'NONE', ( 10.80340241005774300, -10.48130974848193600, 25.00000000000000000 ) ) ; +#12001 = CARTESIAN_POINT ( 'NONE', ( 35.36677937932417800, -18.02263094738081500, -24.32896042003294600 ) ) ; +#12002 = EDGE_CURVE ( 'NONE', #9379, #7944, #10648, .T. ) ; +#12003 = EDGE_LOOP ( 'NONE', ( #9657, #9785, #10008, #10625, #10784, #10923, #11096, #11114, #11386, #11550 ) ) ; +#12004 = CARTESIAN_POINT ( 'NONE', ( 6.845638686747115300, -95.14102716985026100, 12.92966114424102400 ) ) ; +#12005 = CARTESIAN_POINT ( 'NONE', ( 10.37223236162735800, -7.516014948806764000, -30.68231123773680500 ) ) ; +#12006 = CARTESIAN_POINT ( 'NONE', ( 6.980069346704205200, -30.95335459297372400, 23.28704248499362400 ) ) ; +#12007 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -39.52045731841470700, 19.79474689191102500 ) ) ; +#12008 = CARTESIAN_POINT ( 'NONE', ( 8.920096478064277100, -100.0000000000000000, 19.28210194485221200 ) ) ; +#12009 = CARTESIAN_POINT ( 'NONE', ( 11.42977642272751400, -30.69659536052514400, 27.11079195235586100 ) ) ; +#12010 = ORIENTED_EDGE ( 'NONE', *, *, #6972, .F. ) ; +#12011 = CARTESIAN_POINT ( 'NONE', ( 6.154283049305211900, -19.66600085841941200, 13.92352495212249900 ) ) ; +#12012 = CARTESIAN_POINT ( 'NONE', ( 39.99360490087398300, -26.77890589303483900, 7.263935177081054700 ) ) ; +#12013 = ORIENTED_EDGE ( 'NONE', *, *, #623, .F. ) ; +#12014 = CARTESIAN_POINT ( 'NONE', ( 32.27318372467205900, -10.39606450107651600, -25.06983685764062000 ) ) ; +#12015 = CARTESIAN_POINT ( 'NONE', ( 32.25985973300602400, -30.79494776763267100, 27.61393431208603700 ) ) ; +#12016 = CARTESIAN_POINT ( 'NONE', ( 11.75445118207407800, -38.13048303796929900, 17.57866603314201700 ) ) ; +#12017 = EDGE_LOOP ( 'NONE', ( #5991, #6000, #6332, #6478 ) ) ; +#12018 = CARTESIAN_POINT ( 'NONE', ( 21.66650992579016600, -19.84087067459206100, 23.26478898640677800 ) ) ; +#12019 = CARTESIAN_POINT ( 'NONE', ( 13.66272045886656400, -30.83579645274801700, 27.90612748135485100 ) ) ; +#12020 = CARTESIAN_POINT ( 'NONE', ( 39.14071313804144800, -28.94796858913977600, 21.74388287367873200 ) ) ; +#12021 = EDGE_CURVE ( 'NONE', #3266, #2501, #8299, .T. ) ; +#12022 = CARTESIAN_POINT ( 'NONE', ( 9.781888827393565600, -30.79238788420774500, 26.23508780617139600 ) ) ; +#12023 = CARTESIAN_POINT ( 'NONE', ( 10.53233675222984900, -16.16061840418304700, -24.88441613809203500 ) ) ; +#12024 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000157200, -27.34536682570180900, 7.998753314070236300 ) ) ; +#12025 = CARTESIAN_POINT ( 'NONE', ( 36.89148702928727600, -93.12986408887923100, 20.14761888086674800 ) ) ; +#12026 = ORIENTED_EDGE ( 'NONE', *, *, #10428, .F. ) ; +#12027 = CARTESIAN_POINT ( 'NONE', ( 5.867329074473669700, -30.48841573479602100, 21.53980882771925200 ) ) ; +#12028 = CARTESIAN_POINT ( 'NONE', ( 37.77950515633831700, -30.06603208237154200, 24.61035228423910900 ) ) ; +#12029 = CARTESIAN_POINT ( 'NONE', ( 38.41697278953003500, -14.82119789781047500, -25.85010726872290500 ) ) ; +#12030 = CARTESIAN_POINT ( 'NONE', ( 34.15594174697782400, -30.82506097900354200, 26.79811561155751300 ) ) ; +#12031 = ADVANCED_FACE ( 'NONE', ( #5219 ), #1731, .T. ) ; +#12032 = CARTESIAN_POINT ( 'NONE', ( 0.07995835778447631100, 10.14820631820833800, -22.98400832844311700 ) ) ; +#12033 = ORIENTED_EDGE ( 'NONE', *, *, #8560, .T. ) ; +#12034 = CARTESIAN_POINT ( 'NONE', ( 8.103047903539742700, -30.50268943525956200, 25.21627414490761200 ) ) ; +#12035 = CARTESIAN_POINT ( 'NONE', ( 7.350565193684512400, -18.90049005250934400, -21.27416514107066800 ) ) ; +#12036 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12037 = CARTESIAN_POINT ( 'NONE', ( 42.69632007315691900, 11.99999998353632500, -22.69632007315740200 ) ) ; +#12038 = CARTESIAN_POINT ( 'NONE', ( 39.42080614494421600, -29.95973453284214500, 22.68054763303399600 ) ) ; +#12039 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -3.609825003797118800E-016 ) ) ; +#12040 = CARTESIAN_POINT ( 'NONE', ( 36.06286507393079400, -31.01209812489501200, 25.49216766382436100 ) ) ; +#12041 = CARTESIAN_POINT ( 'NONE', ( 34.47894556069062600, -16.36389442301300100, -24.85020986506367900 ) ) ; +#12042 = CARTESIAN_POINT ( 'NONE', ( 36.57151386496820300, -23.36569926989686500, -21.82144806381724000 ) ) ; +#12043 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.57596123254015200, 10.74922904676193400 ) ) ; +#12044 = CARTESIAN_POINT ( 'NONE', ( 20.20955359353471400, -7.687436358930526100, -32.93738577800306900 ) ) ; +#12045 = LINE ( 'NONE', #756, #9400 ) ; +#12046 = CARTESIAN_POINT ( 'NONE', ( 6.421957902301370400, -30.04107330373812700, 23.76993241686924900 ) ) ; +#12047 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000000, -16.29999999999998600 ) ) ; +#12048 = CARTESIAN_POINT ( 'NONE', ( 32.05506175409792700, -30.73327891479581100, 27.69509754955239300 ) ) ; +#12049 = ORIENTED_EDGE ( 'NONE', *, *, #5859, .T. ) ; +#12050 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, -14.31000000000000400 ) ) ; +#12051 = CARTESIAN_POINT ( 'NONE', ( 11.45078289611498000, -30.30057167538601300, 27.13264681795833900 ) ) ; +#12052 = CARTESIAN_POINT ( 'NONE', ( 5.291540950096455200, -19.82965068595729000, 11.02377825758254400 ) ) ; +#12053 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -99.99999999999998600, -25.63802908547507900 ) ) ; +#12054 = CARTESIAN_POINT ( 'NONE', ( 33.05647760192304900, -10.08910923772359100, -25.00000000000058300 ) ) ; +#12055 = CARTESIAN_POINT ( 'NONE', ( 32.05554524059658700, -30.66003991678938000, 27.70393834777345500 ) ) ; +#12056 = CARTESIAN_POINT ( 'NONE', ( 5.698664061269816700, -31.76828049579743400, 10.54594364132799600 ) ) ; +#12057 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 7.000000000000000000, -1.200000000000012600 ) ) ; +#12058 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12059 = CARTESIAN_POINT ( 'NONE', ( 13.66314596555004000, -30.82199791958633400, 27.90868450141714200 ) ) ; +#12060 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #12117, #5873, #13073 ), + ( #7102, #1008, #8132 ), + ( #2014, #9148, #3029 ), + ( #10156, #4026, #11177 ), + ( #5066, #12162, #6093 ), + ( #41, #7149, #1051 ), + ( #8174, #2060, #9191 ), + ( #3071, #10203, #4076 ), + ( #11219, #5107, #12205 ), + ( #6138, #86, #7198 ), + ( #1096, #8224, #2104 ), + ( #9238, #3111, #10245 ), + ( #4124, #11268, #5147 ), + ( #12251, #6188, #134 ), + ( #7239, #1143, #8271 ), + ( #2145, #9278, #3160 ), + ( #10288, #4168, #11312 ), + ( #5193, #12292, #6231 ), + ( #181, #7287, #1186 ), + ( #8317, #2187, #9323 ), + ( #3203, #10336, #4214 ), + ( #11354, #5237, #12335 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -6.391412998422195200E-005, 6.430055254645149600E-006, 7.677424049351225100E-005, 0.0002174626109712464400, 0.0004988393519267148200, 0.001061592833837651600, 0.002187099797659525300, 0.003312606761481398800, 0.004438113725303272800, 0.006689127652947019800, 0.008940141580590766800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9732350182765251400, 1.000000000000000000), + ( 1.000000000000000000, 0.9732408132553032100, 1.000000000000000000), + ( 1.000000000000000000, 0.9732434934227524000, 1.000000000000000000), + ( 1.000000000000000000, 0.9732572447879809200, 1.000000000000000000), + ( 1.000000000000000000, 0.9732633061201225700, 1.000000000000000000), + ( 1.000000000000000000, 0.9732790594194393700, 1.000000000000000000), + ( 1.000000000000000000, 0.9732863206696783500, 1.000000000000000000), + ( 1.000000000000000000, 0.9732984809495267600, 1.000000000000000000), + ( 1.000000000000000000, 0.9732937563044741200, 1.000000000000000000), + ( 1.000000000000000000, 0.9732418907313462600, 1.000000000000000000), + ( 1.000000000000000000, 0.9731570561309219600, 1.000000000000000000), + ( 1.000000000000000000, 0.9727582967811995200, 1.000000000000000000), + ( 1.000000000000000000, 0.9723001006463566400, 1.000000000000000000), + ( 1.000000000000000000, 0.9710343504510198200, 1.000000000000000000), + ( 1.000000000000000000, 0.9702201541862618400, 1.000000000000000000), + ( 1.000000000000000000, 0.9683261860603500400, 1.000000000000000000), + ( 1.000000000000000000, 0.9672552122202917600, 1.000000000000000000), + ( 1.000000000000000000, 0.9637638089680348200, 1.000000000000000000), + ( 1.000000000000000000, 0.9610686424294008200, 1.000000000000000000), + ( 1.000000000000000000, 0.9552747100425422700, 1.000000000000000000), + ( 1.000000000000000000, 0.9522292669552190300, 1.000000000000000000), + ( 1.000000000000000000, 0.9491930522421504500, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#12061 = EDGE_CURVE ( 'NONE', #105, #5510, #12525, .T. ) ; +#12062 = CIRCLE ( 'NONE', #12819, 3.189999999999994200 ) ; +#12063 = CARTESIAN_POINT ( 'NONE', ( 9.807481606711274200, -30.11556308050972700, 26.31175575519126000 ) ) ; +#12064 = CARTESIAN_POINT ( 'NONE', ( 0.1822815212234071000, -10.36456304244674300, -11.53187062879840900 ) ) ; +#12065 = ORIENTED_EDGE ( 'NONE', *, *, #5713, .F. ) ; +#12066 = CARTESIAN_POINT ( 'NONE', ( 5.095065312819736300, -28.78093517868170900, 14.83055176873348000 ) ) ; +#12067 = CARTESIAN_POINT ( 'NONE', ( 30.93680119345618400, -97.49994968325430000, 21.42430477526576400 ) ) ; +#12068 = CARTESIAN_POINT ( 'NONE', ( 5.102934490017211100, -29.45207892436570100, 21.72303377206386800 ) ) ; +#12069 = CARTESIAN_POINT ( 'NONE', ( 37.43253444222563800, -31.02008702111226800, 24.10613921631076600 ) ) ; +#12070 = CARTESIAN_POINT ( 'NONE', ( 25.05762127725337900, -27.96664356551895400, 27.45669629599069600 ) ) ; +#12071 = CARTESIAN_POINT ( 'NONE', ( 34.03191397120971800, -30.18436619561057200, 26.90306088187344400 ) ) ; +#12072 = CIRCLE ( 'NONE', #13015, 3.189999999999995100 ) ; +#12073 = CARTESIAN_POINT ( 'NONE', ( 13.76586904079734500, -30.82654731345164100, 27.93780948131385600 ) ) ; +#12074 = CARTESIAN_POINT ( 'NONE', ( 8.319005206309675800, -29.51856596962470300, 25.12838555812800600 ) ) ; +#12075 = CARTESIAN_POINT ( 'NONE', ( 6.581406840407509200, -14.82039802083770600, -25.84996622882922400 ) ) ; +#12076 = CARTESIAN_POINT ( 'NONE', ( 0.5276495650789956300, -11.05554756518415800, 7.949835587213958600 ) ) ; +#12077 = CARTESIAN_POINT ( 'NONE', ( 24.89376114441425300, -28.77640292087719900, 29.18921356439614800 ) ) ; +#12078 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12079 = EDGE_CURVE ( 'NONE', #9688, #9213, #4897, .T. ) ; +#12080 = CARTESIAN_POINT ( 'NONE', ( 38.54641139749502800, -30.79525273136384600, 22.48919005818637000 ) ) ; +#12081 = CARTESIAN_POINT ( 'NONE', ( 35.97706746759232700, -29.83715300632164300, 25.76575057484094000 ) ) ; +#12082 = CARTESIAN_POINT ( 'NONE', ( 3.413551798539599800, -11.17333082328735100, -21.86088454059507300 ) ) ; +#12083 = CARTESIAN_POINT ( 'NONE', ( 38.61166773087516900, -20.35526525733178000, -18.01395101610694400 ) ) ; +#12084 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #343, #247, #155 ), + ( #111, #66, #20 ), + ( #3491, #4498, #7312 ), + ( #205, #6255, #12314 ), + ( #5218, #11335, #4192 ), + ( #10314, #3183, #9124 ), + ( #1989, #8108, #988 ), + ( #7079, #13050, #6026 ), + ( #12098, #4989, #11109 ), + ( #3960, #10082, #2960 ), + ( #9084, #1944, #8063 ), + ( #944, #7036, #13008 ), + ( #5980, #12054, #4949 ), + ( #11060, #3917, #10043 ), + ( #2914, #9041, #1906 ), + ( #8020, #895, #6988 ), + ( #12965, #5933, #12014 ), + ( #4906, #11014, #3872 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -2.942091015256664800E-015, 0.001335322248305767300, 0.002002983372460122100, 0.002670644496614476800, 0.003338305620768831500, 0.004005966744923186200, 0.004339797307000363800, 0.004673627869077540500, 0.005341288993231895600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9921686194339633900, 1.000000000000000000), + ( 1.000000000000000000, 0.9931760277074565000, 1.000000000000000000), + ( 1.000000000000000000, 0.9941250566938858400, 1.000000000000000000), + ( 1.000000000000000000, 0.9953792144316223600, 1.000000000000000000), + ( 1.000000000000000000, 0.9957649973188541500, 1.000000000000000000), + ( 1.000000000000000000, 0.9964504747578196700, 1.000000000000000000), + ( 1.000000000000000000, 0.9967517656745313900, 1.000000000000000000), + ( 1.000000000000000000, 0.9972277938967001300, 1.000000000000000000), + ( 1.000000000000000000, 0.9973959236836339400, 1.000000000000000000), + ( 1.000000000000000000, 0.9975632145475695800, 1.000000000000000000), + ( 1.000000000000000000, 0.9975574748296786000, 1.000000000000000000), + ( 1.000000000000000000, 0.9974271132400055500, 1.000000000000000000), + ( 1.000000000000000000, 0.9973628052261043200, 1.000000000000000000), + ( 1.000000000000000000, 0.9972022378906046900, 1.000000000000000000), + ( 1.000000000000000000, 0.9971058602207232300, 1.000000000000000000), + ( 1.000000000000000000, 0.9967765315096340800, 1.000000000000000000), + ( 1.000000000000000000, 0.9965020607582894000, 1.000000000000000000), + ( 1.000000000000000000, 0.9961946980917458800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#12085 = ORIENTED_EDGE ( 'NONE', *, *, #11752, .T. ) ; +#12086 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -95.10391797849830200, 7.304666556796511200 ) ) ; +#12087 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #497, #5475, #4513 ), + ( #11664, #5565, #12625 ), + ( #6597, #534, #7645 ), + ( #1530, #8673, #2533 ), + ( #9676, #3549, #10682 ), + ( #4561, #11704, #5603 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( -2.168404344971008900E-019, 0.002076179090457745500, 0.004152358180915491000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9946465701320194000, 1.000000000000000000), + ( 1.000000000000000000, 0.9943282374579361900, 1.000000000000000000), + ( 1.000000000000000000, 0.9939164587420011900, 1.000000000000000000), + ( 1.000000000000000000, 0.9930437869129168400, 1.000000000000000000), + ( 1.000000000000000000, 0.9925908774224001500, 1.000000000000000000), + ( 1.000000000000000000, 0.9921686194340063600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#12088 = CARTESIAN_POINT ( 'NONE', ( -0.3213118357944793100, -7.822338240668043100, -17.34023540753436500 ) ) ; +#12089 = CARTESIAN_POINT ( 'NONE', ( 6.981291322032738800, -29.11560722944921400, 23.61050540076927700 ) ) ; +#12090 = CARTESIAN_POINT ( 'NONE', ( 20.14545145376411400, -32.13578828253771700, 21.09686328653844700 ) ) ; +#12091 = CARTESIAN_POINT ( 'NONE', ( 32.05525789192881100, -30.86061283119002500, 27.67140411217146200 ) ) ; +#12092 = CARTESIAN_POINT ( 'NONE', ( 10.42731744075192100, -12.24252385349320900, 24.45431827302735800 ) ) ; +#12093 = CARTESIAN_POINT ( 'NONE', ( 11.53109540352158100, -30.80275920474563000, 27.13105013386229200 ) ) ; +#12094 = EDGE_CURVE ( 'NONE', #3100, #11068, #7653, .T. ) ; +#12095 = CARTESIAN_POINT ( 'NONE', ( 5.072479566354388700, -19.91475118601848500, 9.515883135816571000 ) ) ; +#12096 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000005300, -12.49999999999998400, -10.20941827348498200 ) ) ; +#12097 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5233, #12018, #12259, #5227 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.005000233133021967300 ), + .UNSPECIFIED. ) ; +#12098 = CARTESIAN_POINT ( 'NONE', ( 34.08710803726700100, -10.40044979249160100, -25.00000000000000000 ) ) ; +#12099 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -100.0000000000000300, -38.36942826376123600 ) ) ; +#12100 = CARTESIAN_POINT ( 'NONE', ( 13.66272164138212000, -30.80704089566335600, 27.91119820642611400 ) ) ; +#12101 = CARTESIAN_POINT ( 'NONE', ( 10.01757697569327400, -31.05331329327842800, 26.21935812617123700 ) ) ; +#12102 = FACE_OUTER_BOUND ( 'NONE', #1901, .T. ) ; +#12103 = CARTESIAN_POINT ( 'NONE', ( 2.880070104927994600, -9.533600082459944500, 21.71218674862584000 ) ) ; +#12104 = CARTESIAN_POINT ( 'NONE', ( 34.20632218397086900, -14.50880408398956500, -24.99999999999998900 ) ) ; +#12105 = CARTESIAN_POINT ( 'NONE', ( 24.99999999995960900, -94.74682992296712300, 18.71443453778742600 ) ) ; +#12106 = CARTESIAN_POINT ( 'NONE', ( 6.071647730478669100, -30.57994866116045800, 21.58622717465535200 ) ) ; +#12107 = CARTESIAN_POINT ( 'NONE', ( 37.32408441248365000, -29.73969397725551300, 24.81623443004513200 ) ) ; +#12108 = CARTESIAN_POINT ( 'NONE', ( 24.99264576486658700, -27.96523496585092200, 27.45710953202297200 ) ) ; +#12109 = EDGE_CURVE ( 'NONE', #8884, #5504, #10212, .T. ) ; +#12110 = CARTESIAN_POINT ( 'NONE', ( 34.06405293386044500, -30.68001885711009900, 26.88467656155033900 ) ) ; +#12111 = CARTESIAN_POINT ( 'NONE', ( 29.35693542389268300, -20.06324773140929500, 22.57593796167125400 ) ) ; +#12112 = FACE_OUTER_BOUND ( 'NONE', #11320, .T. ) ; +#12113 = CARTESIAN_POINT ( 'NONE', ( 14.31907905734669300, -30.80754468523395000, 28.10233139441994500 ) ) ; +#12114 = CARTESIAN_POINT ( 'NONE', ( 8.365462131755046800, -30.84012151110609800, 25.19031046616740000 ) ) ; +#12115 = CARTESIAN_POINT ( 'NONE', ( 9.966516175579034400, -10.00364635937677300, 24.99935704846052100 ) ) ; +#12116 = CARTESIAN_POINT ( 'NONE', ( 0.5278213104113542700, -11.05570011369913200, 7.992493079879738000 ) ) ; +#12117 = CARTESIAN_POINT ( 'NONE', ( 44.47186400799708400, -11.05596098980534600, -11.46691647240287400 ) ) ; +#12118 = CARTESIAN_POINT ( 'NONE', ( 38.23217140517191800, -15.80801960646260300, -22.83276268950952900 ) ) ; +#12119 = CARTESIAN_POINT ( 'NONE', ( 38.98841121469852300, -29.72551052166128800, 23.19706142216634600 ) ) ; +#12120 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.57596123371020300, 12.92977595461369400 ) ) ; +#12121 = FACE_OUTER_BOUND ( 'NONE', #10261, .T. ) ; +#12122 = CARTESIAN_POINT ( 'NONE', ( 36.05754869495947900, -30.69747446816403200, 25.73147475410817400 ) ) ; +#12123 = CARTESIAN_POINT ( 'NONE', ( 27.37893056191246900, -19.95261660770390600, 23.09786336383849900 ) ) ; +#12124 = CARTESIAN_POINT ( 'NONE', ( 40.49257432136397500, -17.94798264331227200, -16.12803006364918400 ) ) ; +#12125 = EDGE_CURVE ( 'NONE', #12805, #1071, #7868, .T. ) ; +#12126 = CARTESIAN_POINT ( 'NONE', ( 38.85313880365205800, -93.88192333451007700, 5.240109433606627400 ) ) ; +#12127 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 1, ( + ( #11229, #2905 ), + ( #96, #7206 ), + ( #1107, #8235 ), + ( #2113, #9248 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 1.000000000000000000), + ( 0.9897976766153158100, 0.9897976766153158100), + ( 0.9897976766153158100, 0.9897976766153158100), + ( 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#12128 = CARTESIAN_POINT ( 'NONE', ( 5.414691017750502800, -9.999999999999996400, -25.49750839269783900 ) ) ; +#12129 = ADVANCED_FACE ( 'NONE', ( #2211 ), #4570, .F. ) ; +#12130 = CARTESIAN_POINT ( 'NONE', ( 6.551747054557417900, -30.33483870451526000, 23.80954005035749100 ) ) ; +#12131 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#12132 = CARTESIAN_POINT ( 'NONE', ( 31.74822623411101200, -30.73636477213625200, 27.79500602511980700 ) ) ; +#12133 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12134 = CARTESIAN_POINT ( 'NONE', ( 11.54086466359722300, -30.40884510841699400, 27.17814966345657300 ) ) ; +#12135 = EDGE_LOOP ( 'NONE', ( #5328, #5372, #5374, #5501 ) ) ; +#12136 = CARTESIAN_POINT ( 'NONE', ( 42.49999999999999300, -3.903127820947817500E-015, 22.50000000000000400 ) ) ; +#12137 = CARTESIAN_POINT ( 'NONE', ( 11.41043122235083600, -12.50000000000000500, -19.46796797297414400 ) ) ; +#12138 = LINE ( 'NONE', #10943, #6771 ) ; +#12139 = CARTESIAN_POINT ( 'NONE', ( 6.256867239339731800, -97.42181713028752200, 18.37434326604868000 ) ) ; +#12140 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -97.24871200018998300, 12.92977595461371200 ) ) ; +#12141 = CARTESIAN_POINT ( 'NONE', ( 41.06657274746455500, -17.91134279615144500, -12.59297139371783700 ) ) ; +#12142 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344970500, 27.93780948130441300 ) ) ; +#12143 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -5.000000000000000900, -23.00000000000000000 ) ) ; +#12144 = CARTESIAN_POINT ( 'NONE', ( 9.960810357564696500, -30.42992208845306800, 26.42758924716040500 ) ) ; +#12145 = DIRECTION ( 'NONE', ( -0.5368593757341083600, -0.8436717434443230500, -0.0000000000000000000 ) ) ; +#12146 = CARTESIAN_POINT ( 'NONE', ( 40.93146587419101900, -8.872477361301314100, -24.99999999999997200 ) ) ; +#12147 = CARTESIAN_POINT ( 'NONE', ( 43.91121943129422800, -8.725575348511467800, 16.44617847691291200 ) ) ; +#12148 = CARTESIAN_POINT ( 'NONE', ( 5.008456141723419500, -29.79221267992443200, 21.72647499483651100 ) ) ; +#12149 = CARTESIAN_POINT ( 'NONE', ( 37.32411229732423400, -30.78018849665070200, 24.63275932548988900 ) ) ; +#12150 = ORIENTED_EDGE ( 'NONE', *, *, #6323, .T. ) ; +#12151 = CARTESIAN_POINT ( 'NONE', ( 21.72904794238266400, -31.32859295631809000, 28.73919360125269100 ) ) ; +#12152 = EDGE_CURVE ( 'NONE', #1086, #6128, #5472, .T. ) ; +#12153 = CARTESIAN_POINT ( 'NONE', ( 34.03028290845045900, -31.08742418562378500, 26.74032926825507400 ) ) ; +#12154 = CARTESIAN_POINT ( 'NONE', ( 31.80855210100563100, -27.22496805606983400, 20.35723395980302500 ) ) ; +#12155 = VERTEX_POINT ( 'NONE', #2589 ) ; +#12156 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #3150, #4145, ( #10149 ) ) ; +#12157 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12158 = ORIENTED_EDGE ( 'NONE', *, *, #1977, .F. ) ; +#12159 = CARTESIAN_POINT ( 'NONE', ( 8.365440864954161200, -29.87412179212845600, 25.36064352761823300 ) ) ; +#12160 = CARTESIAN_POINT ( 'NONE', ( 10.11772692681327600, -11.27391705437398400, 24.77537405212923000 ) ) ; +#12161 = CARTESIAN_POINT ( 'NONE', ( -6.694244876730837100E-014, -10.00001319316978700, 8.048973377860734900 ) ) ; +#12162 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000007100, -9.999806074067230100, -11.59931721658661500 ) ) ; +#12163 = CARTESIAN_POINT ( 'NONE', ( 38.71959056214211600, -29.02107005969377000, 24.44397294894420000 ) ) ; +#12164 = ORIENTED_EDGE ( 'NONE', *, *, #6817, .T. ) ; +#12165 = CARTESIAN_POINT ( 'NONE', ( 38.47304303417059400, -30.77783770612505900, 22.90063257027915400 ) ) ; +#12166 = CARTESIAN_POINT ( 'NONE', ( 32.09863200989554600, -10.43079757070501200, -25.07596123493895100 ) ) ; +#12167 = ORIENTED_EDGE ( 'NONE', *, *, #5882, .T. ) ; +#12168 = EDGE_CURVE ( 'NONE', #2501, #11902, #10019, .T. ) ; +#12169 = CARTESIAN_POINT ( 'NONE', ( 35.75010164826969100, -29.70052932668588900, 25.84146554998161000 ) ) ; +#12170 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -22.09633208356318000, -11.60832001047482700 ) ) ; +#12171 = CARTESIAN_POINT ( 'NONE', ( 39.99487182950669300, -22.41938922365429200, -12.44958176957714400 ) ) ; +#12172 = EDGE_CURVE ( 'NONE', #783, #3780, #12657, .T. ) ; +#12173 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -90.97465602836921100, -3.162233253605870200 ) ) ; +#12174 = CARTESIAN_POINT ( 'NONE', ( 0.6779447025436469200, 11.35811734783826100, -24.32205529745628100 ) ) ; +#12175 = CARTESIAN_POINT ( 'NONE', ( 16.05949315056704000, -20.83986826239194900, -26.41362519053478400 ) ) ; +#12176 = CARTESIAN_POINT ( 'NONE', ( 6.922546790699139600, -29.26562937409241300, 23.75525676361041900 ) ) ; +#12177 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12178 = CARTESIAN_POINT ( 'NONE', ( 31.74733666101482800, -30.81493801676647600, 27.78255980998365600 ) ) ; +#12179 = CARTESIAN_POINT ( 'NONE', ( 6.244294805625685300, -97.04517183358916600, 18.40004121853224500 ) ) ; +#12180 = CARTESIAN_POINT ( 'NONE', ( 11.73789297416086600, -30.94746483317224400, 27.17379242448626200 ) ) ; +#12181 = CARTESIAN_POINT ( 'NONE', ( 32.32171378888971700, -100.0000000000000100, -35.96519623375461800 ) ) ; +#12182 = CARTESIAN_POINT ( 'NONE', ( 44.09157152587820900, -8.452784834690840300, 16.38149653183795700 ) ) ; +#12183 = ORIENTED_EDGE ( 'NONE', *, *, #11854, .T. ) ; +#12184 = CARTESIAN_POINT ( 'NONE', ( 7.970816796100113100, -11.19700949097267000, 23.87417545419212000 ) ) ; +#12185 = CARTESIAN_POINT ( 'NONE', ( 39.93493169167079800, -96.92159152404075000, 12.92977595461371200 ) ) ; +#12186 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -8.323036542205249900E-015, 25.00105000000004200 ) ) ; +#12187 = CARTESIAN_POINT ( 'NONE', ( 13.76586904076375400, -30.82654731344970900, 27.93780948130441300 ) ) ; +#12188 = CARTESIAN_POINT ( 'NONE', ( 40.91134949032931400, -18.17730101934128200, -11.29472403068574600 ) ) ; +#12189 = EDGE_CURVE ( 'NONE', #12504, #4543, #7336, .T. ) ; +#12190 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000700, 9.723972447247824400, 1.698850734653959200 ) ) ; +#12191 = CARTESIAN_POINT ( 'NONE', ( 10.40549079015788400, -31.12763086734003100, 26.40341747427637700 ) ) ; +#12192 = CARTESIAN_POINT ( 'NONE', ( 36.71851553603307400, -12.50000000000001100, 13.77802368493154900 ) ) ; +#12193 = CARTESIAN_POINT ( 'NONE', ( 42.86332359425200200, -9.166810606123249300, 18.10840629609224500 ) ) ; +#12194 = CARTESIAN_POINT ( 'NONE', ( 6.069793221518272800, -28.88655498767222000, 21.88467300565993800 ) ) ; +#12195 = CARTESIAN_POINT ( 'NONE', ( 36.99685460736874600, -29.44007497791830000, 24.83984186601665600 ) ) ; +#12196 = VERTEX_POINT ( 'NONE', #11795 ) ; +#12197 = LINE ( 'NONE', #2392, #4089 ) ; +#12198 = CARTESIAN_POINT ( 'NONE', ( 33.86632946905782400, -30.58813111677236700, 26.99281945146162400 ) ) ; +#12199 = CARTESIAN_POINT ( 'NONE', ( 37.21112221415262400, -28.83925737897926900, 24.47009580470669500 ) ) ; +#12200 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12201 = CARTESIAN_POINT ( 'NONE', ( 8.727237877000261400, -31.11378196900705000, 25.20786025937519900 ) ) ; +#12202 = CARTESIAN_POINT ( 'NONE', ( 40.42587456208267600, -7.557122968630411100, -26.27809241864478600 ) ) ; +#12203 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, -8.811662037621131200, 8.328536392642101700 ) ) ; +#12204 = ORIENTED_EDGE ( 'NONE', *, *, #2601, .T. ) ; +#12205 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, -8.811396006444953200, -11.95235817859837700 ) ) ; +#12206 = CARTESIAN_POINT ( 'NONE', ( 35.62932096251624600, -31.92682544747253800, 25.95177330082925600 ) ) ; +#12207 = EDGE_CURVE ( 'NONE', #4071, #2501, #1898, .T. ) ; +#12208 = CARTESIAN_POINT ( 'NONE', ( 38.50589984544841800, -29.34322614831617700, 23.41583193499175100 ) ) ; +#12209 = VECTOR ( 'NONE', #3638, 1000.000000000000000 ) ; +#12210 = ORIENTED_EDGE ( 'NONE', *, *, #4260, .F. ) ; +#12211 = CARTESIAN_POINT ( 'NONE', ( 19.94205019309342600, -33.35025653084942100, 26.50741664928542100 ) ) ; +#12212 = CARTESIAN_POINT ( 'NONE', ( 35.89494089109918900, -30.50279117232793200, 25.91722604686382400 ) ) ; +#12213 = CARTESIAN_POINT ( 'NONE', ( 11.35228933868426200, -13.41914980536907200, -25.15601430610437800 ) ) ; +#12214 = CARTESIAN_POINT ( 'NONE', ( 40.00496367429348500, -19.99395561394563400, -11.61589919720122800 ) ) ; +#12215 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#12216 = CARTESIAN_POINT ( 'NONE', ( 0.01611524019937049500, 9.827245291872298300, -22.99677695196011500 ) ) ; +#12217 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -19.99999999999989000, -11.53187062879840500 ) ) ; +#12218 = CARTESIAN_POINT ( 'NONE', ( 6.933267004484255500, -30.74474851193927400, 23.78156341267625600 ) ) ; +#12219 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.734723475976807600E-016, 1.000000000000000000 ) ) ; +#12220 = CARTESIAN_POINT ( 'NONE', ( 31.64591341351819800, -30.74585212412478800, 27.82618780121407900 ) ) ; +#12221 = CARTESIAN_POINT ( 'NONE', ( 0.3050857232953051400, -7.120633324109576300, 16.24710874002285600 ) ) ; +#12222 = CARTESIAN_POINT ( 'NONE', ( 11.73001998316148000, -30.59961497576779600, 27.25343143249391500 ) ) ; +#12223 = CYLINDRICAL_SURFACE ( 'NONE', #11822, 4.999999999999997300 ) ; +#12224 = CARTESIAN_POINT ( 'NONE', ( 37.42055594107599600, -100.0000000000000100, -27.29398733170707600 ) ) ; +#12225 = CARTESIAN_POINT ( 'NONE', ( 31.67484925220208300, -15.37736703653068200, 24.05182510628735000 ) ) ; +#12226 = EDGE_CURVE ( 'NONE', #11902, #7642, #7007, .T. ) ; +#12227 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #109 ) ; +#12228 = CARTESIAN_POINT ( 'NONE', ( 39.68446597088565400, -96.31691378401171700, 12.92977595461371200 ) ) ; +#12229 = PLANE ( 'NONE', #8632 ) ; +#12230 = CARTESIAN_POINT ( 'NONE', ( 9.425525026353872300, -12.47888111883624700, 23.66694355178387400 ) ) ; +#12231 = EDGE_CURVE ( 'NONE', #10590, #4250, #3102, .T. ) ; +#12232 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12233 = CARTESIAN_POINT ( 'NONE', ( 10.34553770921937000, -30.61578202424049200, 26.60641319101165400 ) ) ; +#12234 = CARTESIAN_POINT ( 'NONE', ( 34.16939331951962800, -100.0000000000000300, 2.561698833008318100 ) ) ; +#12235 = CARTESIAN_POINT ( 'NONE', ( 1.592784808119522400, -8.665279588563079100, -22.67146940533790900 ) ) ; +#12236 = CARTESIAN_POINT ( 'NONE', ( 42.65193790227819200, -9.246820038813099900, 20.63071922336060700 ) ) ; +#12237 = FACE_OUTER_BOUND ( 'NONE', #8260, .T. ) ; +#12238 = CARTESIAN_POINT ( 'NONE', ( 5.261965392970324700, -30.15880746386566000, 21.77273951880320300 ) ) ; +#12239 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.663626396092114500, -22.99999999993460200 ) ) ; +#12240 = AXIS2_PLACEMENT_3D ( 'NONE', #11639, #5533, #12597 ) ; +#12241 = CARTESIAN_POINT ( 'NONE', ( 37.26498492712246200, -30.46469931123589300, 24.95529728208328300 ) ) ; +#12242 = EDGE_LOOP ( 'NONE', ( #11110, #11223 ) ) ; +#12243 = CARTESIAN_POINT ( 'NONE', ( 5.001530477182028800, -27.27793638683479900, 8.009327807362234700 ) ) ; +#12244 = FACE_OUTER_BOUND ( 'NONE', #8923, .T. ) ; +#12245 = CARTESIAN_POINT ( 'NONE', ( 33.84254928093036300, -31.04305465894184800, 26.86005494585774000 ) ) ; +#12246 = CARTESIAN_POINT ( 'NONE', ( 36.54464616147647900, -21.29327107681304900, 17.51175982159146800 ) ) ; +#12247 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#12248 = CARTESIAN_POINT ( 'NONE', ( 8.564625195686240000, -30.26637814033485800, 25.57776929492365500 ) ) ; +#12249 = CARTESIAN_POINT ( 'NONE', ( 45.32131183579450400, -7.822338240668059900, -17.34023540753430500 ) ) ; +#12250 = CARTESIAN_POINT ( 'NONE', ( 0.5679729934833364100, -10.85663047769270200, 10.38354172779341400 ) ) ; +#12251 = CARTESIAN_POINT ( 'NONE', ( 44.42907309198581300, -10.63625045130262600, -14.78804616557481400 ) ) ; +#12252 = CARTESIAN_POINT ( 'NONE', ( 30.12346559064175000, -33.00067643241343500, 25.95391432591581400 ) ) ; +#12253 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12369, #12637, #12391, #12353, #12310, #12270, #12228, #12185, #12140, #12120 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.2500000000000000000, 0.5000000000000000000, 0.7500000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#12254 = EDGE_CURVE ( 'NONE', #6456, #2676, #12045, .T. ) ; +#12255 = CARTESIAN_POINT ( 'NONE', ( 38.68750329315876300, -30.47205463266804800, 23.27851959973355300 ) ) ; +#12256 = CARTESIAN_POINT ( 'NONE', ( 35.74972805129084500, -31.16865445447510300, 25.58204270731967300 ) ) ; +#12257 = CARTESIAN_POINT ( 'NONE', ( 11.58969901532142400, -10.71371095370599500, -25.04985896636645400 ) ) ; +#12258 = CARTESIAN_POINT ( 'NONE', ( 41.05007086991945900, -17.89945090763236400, -11.52215491086900400 ) ) ; +#12259 = CARTESIAN_POINT ( 'NONE', ( 23.33349007420982700, -19.84087067459206100, 23.26478898640677800 ) ) ; +#12260 = CARTESIAN_POINT ( 'NONE', ( 33.91389770802237500, -18.38834836106092000, -24.79824795107968100 ) ) ; +#12261 = ADVANCED_FACE ( 'NONE', ( #3931 ), #11712, .T. ) ; +#12262 = CARTESIAN_POINT ( 'NONE', ( 6.800229272604990000, -29.71562481464387100, 24.06883392440483100 ) ) ; +#12263 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -5.000000000000000900, 25.00000000000000000 ) ) ; +#12264 = CARTESIAN_POINT ( 'NONE', ( 31.64465646355720100, -30.80282276503716300, 27.81758215044318700 ) ) ; +#12265 = CARTESIAN_POINT ( 'NONE', ( 11.84210819443908300, -31.00935799248701800, 27.19474006377026100 ) ) ; +#12266 = EDGE_CURVE ( 'NONE', #8244, #3780, #9376, .T. ) ; +#12267 = CARTESIAN_POINT ( 'NONE', ( 29.56225211270506000, -17.30761093677038800, 23.71147102732717500 ) ) ; +#12268 = CARTESIAN_POINT ( 'NONE', ( 39.22150862560234700, -30.43731003741293900, 21.48127115605909100 ) ) ; +#12269 = APPROVAL_ROLE ( '' ) ; +#12270 = CARTESIAN_POINT ( 'NONE', ( 39.49916710599544000, -96.03959443500166100, 12.92977595461371000 ) ) ; +#12271 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999998200, -100.0000000000000300, -6.100827442047413600 ) ) ; +#12272 = CARTESIAN_POINT ( 'NONE', ( 1.720020729815989100, -9.537519840085309400, 16.82783961779730200 ) ) ; +#12273 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12274 = CARTESIAN_POINT ( 'NONE', ( 10.40532852723439000, -30.01974482953160700, 26.59907947269426700 ) ) ; +#12275 = CARTESIAN_POINT ( 'NONE', ( 29.07608945946902800, -12.50000000000001100, 21.39212046133392800 ) ) ; +#12276 = CARTESIAN_POINT ( 'NONE', ( 30.68094199457015800, -30.80754545527090500, 28.10227463479791200 ) ) ; +#12277 = CARTESIAN_POINT ( 'NONE', ( 39.77853483650992700, -12.13272824146078200, 19.94861030375043100 ) ) ; +#12278 = CARTESIAN_POINT ( 'NONE', ( 5.828360924901853800, -29.01289465859425200, 21.97786730656690300 ) ) ; +#12279 = CYLINDRICAL_SURFACE ( 'NONE', #7520, 5.000000000000000900 ) ; +#12280 = CARTESIAN_POINT ( 'NONE', ( 2.000000000065461900, 9.663626396092114500, -25.00000000000000000 ) ) ; +#12281 = CARTESIAN_POINT ( 'NONE', ( 36.65123505483415300, -29.45479786300300900, 25.10323604531685500 ) ) ; +#12282 = DIRECTION ( 'NONE', ( -0.01909900421572705400, 0.9998175973836266300, 0.0000000000000000000 ) ) ; +#12283 = EDGE_CURVE ( 'NONE', #11877, #11764, #7005, .T. ) ; +#12284 = CARTESIAN_POINT ( 'NONE', ( 33.75971949422017100, -30.43170713461633200, 27.04867636334477200 ) ) ; +#12285 = CARTESIAN_POINT ( 'NONE', ( 37.21111801652185800, -26.17331379031831800, 15.91021289078971200 ) ) ; +#12286 = ORIENTED_EDGE ( 'NONE', *, *, #4630, .T. ) ; +#12287 = CARTESIAN_POINT ( 'NONE', ( 8.832495092462398400, -31.16598029775519400, 25.23761370987372000 ) ) ; +#12288 = FACE_OUTER_BOUND ( 'NONE', #4107, .T. ) ; +#12289 = CARTESIAN_POINT ( 'NONE', ( 6.718134334917393400, -95.07596123493894400, 10.89148259895586600 ) ) ; +#12290 = CARTESIAN_POINT ( 'NONE', ( 24.79044640646530300, -7.687436358930551000, -32.93738577800308300 ) ) ; +#12291 = CARTESIAN_POINT ( 'NONE', ( -9.122115930357044200E-013, -9.028749093991320900, 12.61897035098557600 ) ) ; +#12292 = CARTESIAN_POINT ( 'NONE', ( 45.00000000002868500, -8.488769256214642000, -17.19714921779522500 ) ) ; +#12293 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -31.29513776008465700, 28.74509265499353800 ) ) ; +#12294 = CARTESIAN_POINT ( 'NONE', ( 38.03886653271474200, -29.13564005348928600, 23.61948225688160000 ) ) ; +#12295 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3684, #8804, #4704, #11830, #5742, #12787 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0007678199183018736600, 0.002057736042019389000, 0.003347652165736904700 ), + .UNSPECIFIED. ) ; +#12296 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8312, #5765, #5552, #5521, #5508, #5464, #5457, #5436, #5423, #5415, #5393, #5379, #5367 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 1, 2, 2, 2, 4 ), + ( -6.000000000263882000E-008, 0.0006563449247693834700, 0.001312749849538769600, 0.002625559699077541500, 0.003938369548616313600, 0.004594774473385705000, 0.005251179398155096500 ), + .UNSPECIFIED. ) ; +#12297 = CARTESIAN_POINT ( 'NONE', ( 35.79530703462381100, -30.32879960667299800, 25.99684240078772000 ) ) ; +#12298 = CARTESIAN_POINT ( 'NONE', ( 19.85109806680340900, -97.51638476427520200, 22.06849998227423600 ) ) ; +#12299 = EDGE_CURVE ( 'NONE', #10763, #7642, #6676, .T. ) ; +#12300 = EDGE_LOOP ( 'NONE', ( #3585, #3597, #3751, #3892 ) ) ; +#12301 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12302 = CARTESIAN_POINT ( 'NONE', ( 14.88069353929731200, -30.79000797847519500, 28.24582219572488000 ) ) ; +#12303 = CARTESIAN_POINT ( 'NONE', ( 34.86265216083641100, -20.06981705143434900, -23.83070904512880300 ) ) ; +#12304 = CARTESIAN_POINT ( 'NONE', ( 7.227248965295565600, -30.99346861096053700, 23.64425073706354000 ) ) ; +#12305 = CARTESIAN_POINT ( 'NONE', ( 31.64591019544228000, -30.86411789226446300, 27.80533844622595300 ) ) ; +#12306 = CARTESIAN_POINT ( 'NONE', ( 11.82842438241152300, -30.69812410213964100, 27.28192999622471500 ) ) ; +#12307 = CARTESIAN_POINT ( 'NONE', ( 26.77422114229007700, -18.84609809683350100, 23.44019423153451600 ) ) ; +#12308 = CARTESIAN_POINT ( 'NONE', ( 39.21399826401589200, -28.99224471399039500, 21.80408033344310300 ) ) ; +#12309 = ORIENTED_EDGE ( 'NONE', *, *, #3798, .F. ) ; +#12310 = CARTESIAN_POINT ( 'NONE', ( 39.03636679993728400, -95.57679412894350400, 12.92977595461371200 ) ) ; +#12311 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999998200, -12.49999999999999600, 9.327783369942693500 ) ) ; +#12312 = EDGE_LOOP ( 'NONE', ( #12918, #12701, #1217, #9330, #1526, #6940, #1832, #4508, #9957, #12596 ) ) ; +#12313 = CARTESIAN_POINT ( 'NONE', ( 44.40580947679073600, -10.69568680233897800, 11.15596930491937900 ) ) ; +#12314 = CARTESIAN_POINT ( 'NONE', ( 33.77020205165217700, -12.02581765434478300, -25.09220394290989700 ) ) ; +#12315 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#12316 = CARTESIAN_POINT ( 'NONE', ( 10.54784125154882600, -30.77869582567272000, 26.66462369854242100 ) ) ; +#12317 = CARTESIAN_POINT ( 'NONE', ( 40.98493408106910600, -11.31616041681177600, -22.65894377489302500 ) ) ; +#12318 = CARTESIAN_POINT ( 'NONE', ( 37.75472331137994100, -9.904033607361540700, 23.71686295179830100 ) ) ; +#12319 = ORIENTED_EDGE ( 'NONE', *, *, #7866, .F. ) ; +#12320 = CARTESIAN_POINT ( 'NONE', ( 5.846606405851221500, -30.50515229240336600, 21.77127174981706000 ) ) ; +#12321 = CARTESIAN_POINT ( 'NONE', ( 8.315789055746853000, -26.28177676803144500, 16.59199144975799800 ) ) ; +#12322 = CARTESIAN_POINT ( 'NONE', ( 36.90471147204485900, -30.27609729321659100, 25.26547179238564000 ) ) ; +#12323 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2044, #1032, #7131, #3053, #10185, #4056, #11202, #5089, #12190, #6119 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001065464361979366300, 0.002130928723958732200, 0.003196393085938098300, 0.004261857447917464400 ), + .UNSPECIFIED. ) ; +#12324 = ADVANCED_FACE ( 'NONE', ( #11753 ), #4592, .F. ) ; +#12325 = EDGE_CURVE ( 'NONE', #2676, #9645, #2256, .T. ) ; +#12326 = CARTESIAN_POINT ( 'NONE', ( 33.75971967290320900, -30.89345396258235300, 26.96726206308100500 ) ) ; +#12327 = CARTESIAN_POINT ( 'NONE', ( 39.96455191607125800, -27.92767768373510500, 12.44568864452794300 ) ) ; +#12328 = CARTESIAN_POINT ( 'NONE', ( 32.27159570918905700, -10.39638049864617600, -25.06989257653799500 ) ) ; +#12329 = CARTESIAN_POINT ( 'NONE', ( 1.186586359864898700E-008, 9.795017894584692200, -24.99999998813398600 ) ) ; +#12330 = ORIENTED_EDGE ( 'NONE', *, *, #4055, .F. ) ; +#12331 = CARTESIAN_POINT ( 'NONE', ( 8.650969388638365800, -30.48744785200900500, 25.60879425261951100 ) ) ; +#12332 = CARTESIAN_POINT ( 'NONE', ( 7.349991059474030300, -95.07596123493894400, 3.052861428455402800 ) ) ; +#12333 = CARTESIAN_POINT ( 'NONE', ( 34.10314454131709300, -9.999999999999996400, -29.66859204632963600 ) ) ; +#12334 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -5.468698704240285500, 15.53716408247867900 ) ) ; +#12335 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999997900, -4.963376950929704100, -19.39189244597024600 ) ) ; +#12336 = DIRECTION ( 'NONE', ( 0.02364944212992631900, -0.9997203128310154800, 0.0000000000000000000 ) ) ; +#12337 = ADVANCED_FACE ( 'NONE', ( #1279 ), #3947, .F. ) ; +#12338 = CARTESIAN_POINT ( 'NONE', ( 38.57169245043510100, -30.18679898266012500, 23.74124728679878500 ) ) ; +#12339 = EDGE_CURVE ( 'NONE', #9992, #2635, #12999, .T. ) ; +#12340 = CARTESIAN_POINT ( 'NONE', ( 35.70125603235337800, -31.05958085709268700, 25.72519926153204800 ) ) ; +#12341 = CARTESIAN_POINT ( 'NONE', ( 18.49633292959542200, -97.51525546413449800, 22.02908155135812200 ) ) ; +#12342 = ORIENTED_EDGE ( 'NONE', *, *, #11916, .F. ) ; +#12343 = CARTESIAN_POINT ( 'NONE', ( 29.56250289310120400, -95.07596123493894400, 17.45546876126283200 ) ) ; +#12344 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#12345 = CARTESIAN_POINT ( 'NONE', ( 26.32871055805025400, -33.40998945197971900, 28.48788683010768400 ) ) ; +#12346 = CARTESIAN_POINT ( 'NONE', ( 6.778470915052111000, -30.07248934182004200, 24.18923441298285200 ) ) ; +#12347 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12348 = CARTESIAN_POINT ( 'NONE', ( 31.43948114350234800, -30.80664873120034400, 27.88050365498179100 ) ) ; +#12349 = CARTESIAN_POINT ( 'NONE', ( 43.07297059758281700, -9.018157176027873600, -21.33067685737830400 ) ) ; +#12350 = CARTESIAN_POINT ( 'NONE', ( 11.84214603997399700, -30.40014448211038800, 27.30207408410155200 ) ) ; +#12351 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -5.000000000027900300, -19.35342349035173400 ) ) ; +#12352 = CARTESIAN_POINT ( 'NONE', ( 39.77754170891697800, -30.12347295991448300, 21.60499023853135000 ) ) ; +#12353 = CARTESIAN_POINT ( 'NONE', ( 38.75904745092724100, -95.39149526405329000, 12.92977595461371200 ) ) ; +#12354 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999999100, -100.0000000000000300, -5.268163163413124300 ) ) ; +#12355 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12356 = EDGE_CURVE ( 'NONE', #8077, #12196, #6348, .T. ) ; +#12357 = CARTESIAN_POINT ( 'NONE', ( 21.72906461172015500, -30.62972029616883100, 28.86242370731649500 ) ) ; +#12358 = CARTESIAN_POINT ( 'NONE', ( 10.57296058482186800, -30.19299211830025300, 26.71813456125980900 ) ) ; +#12359 = CARTESIAN_POINT ( 'NONE', ( 28.05273744704142700, -30.73015094776378600, 28.68741507210755500 ) ) ; +#12360 = ORIENTED_EDGE ( 'NONE', *, *, #1377, .F. ) ; +#12361 = CARTESIAN_POINT ( 'NONE', ( 0.5643023795284006800, -7.899786773382817100, -19.64129925366963300 ) ) ; +#12362 = CARTESIAN_POINT ( 'NONE', ( 38.73777031679140500, -9.845400183573064000, 27.79360564355243900 ) ) ; +#12363 = CARTESIAN_POINT ( 'NONE', ( 5.281594098456466200, -29.35299022953237400, 21.96732078519599100 ) ) ; +#12364 = CARTESIAN_POINT ( 'NONE', ( -3.469446951953614200E-015, 9.500000000000000000, -25.00000000000000400 ) ) ; +#12365 = CARTESIAN_POINT ( 'NONE', ( 36.66226449418526600, -31.12708409340626000, 24.82205696891429600 ) ) ; +#12366 = CARTESIAN_POINT ( 'NONE', ( 15.55846279649623800, -100.0000000000000100, 5.807110827402657300 ) ) ; +#12367 = CARTESIAN_POINT ( 'NONE', ( 30.85164983735945300, -19.20055552278746100, 22.17101799675260700 ) ) ; +#12368 = CARTESIAN_POINT ( 'NONE', ( 33.55176411652402600, -30.32739707466294000, 27.13393685471101700 ) ) ; +#12369 = CARTESIAN_POINT ( 'NONE', ( 37.49999998962729100, -95.07596123493894400, 12.92969265702213700 ) ) ; +#12370 = LINE ( 'NONE', #5883, #6688 ) ; +#12371 = CARTESIAN_POINT ( 'NONE', ( 15.45093844490859600, -30.77347370972946200, 28.36765821957494200 ) ) ; +#12372 = ORIENTED_EDGE ( 'NONE', *, *, #5628, .F. ) ; +#12373 = CARTESIAN_POINT ( 'NONE', ( 12.13059167847126800, -30.68065015008877300, 27.40643059765335800 ) ) ; +#12374 = CARTESIAN_POINT ( 'NONE', ( 8.824071865759014700, -29.60659405215921700, 25.52434850624064900 ) ) ; +#12375 = EDGE_CURVE ( 'NONE', #11068, #142, #10731, .T. ) ; +#12376 = CARTESIAN_POINT ( 'NONE', ( 37.81892448110984600, -20.45480432629941700, -19.59061824515446700 ) ) ; +#12377 = CARTESIAN_POINT ( 'NONE', ( 0.5280274108130675900, -11.05587287238585100, -11.49385575132423300 ) ) ; +#12378 = CARTESIAN_POINT ( 'NONE', ( 41.05279988974970700, -9.939813053345382300, 22.70576757514623300 ) ) ; +#12379 = CARTESIAN_POINT ( 'NONE', ( 3.332443917679563900, -9.289914829771468900, -24.20840321735235900 ) ) ; +#12380 = EDGE_CURVE ( 'NONE', #330, #7276, #8412, .T. ) ; +#12381 = CARTESIAN_POINT ( 'NONE', ( 38.01730055192732700, -30.95534294894795800, 23.28547339513161800 ) ) ; +#12382 = CARTESIAN_POINT ( 'NONE', ( 35.55933723365080100, -30.03980275334059200, 26.08731017379233900 ) ) ; +#12383 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12384 = CARTESIAN_POINT ( 'NONE', ( 33.26595330252338600, -94.71799171675330300, 17.27888539429815400 ) ) ; +#12385 = CARTESIAN_POINT ( 'NONE', ( 44.15492000030497600, -8.389711229384598600, -19.69998625431987800 ) ) ; +#12386 = CARTESIAN_POINT ( 'NONE', ( 29.25719765212271600, -31.89480662235464700, 20.52754327233097300 ) ) ; +#12387 = CARTESIAN_POINT ( 'NONE', ( 7.246752952256349200, -29.17717242719774300, 23.94794415495422900 ) ) ; +#12388 = CARTESIAN_POINT ( 'NONE', ( 31.43991629920024500, -30.83892482541283900, 27.87459235462554800 ) ) ; +#12389 = CARTESIAN_POINT ( 'NONE', ( 44.64444425084120400, -6.915875621134603100, -20.82078697397840000 ) ) ; +#12390 = CARTESIAN_POINT ( 'NONE', ( 38.92996773421612000, -28.88652470534750400, 21.88504443178318200 ) ) ; +#12391 = CARTESIAN_POINT ( 'NONE', ( 38.15436971089820200, -95.14102954326818900, 12.92977595461371400 ) ) ; +#12392 = CARTESIAN_POINT ( 'NONE', ( 5.205286815027252000, -20.24973465162282700, -8.945470210813681400 ) ) ; +#12393 = ADVANCED_FACE ( 'NONE', ( #11455 ), #3322, .T. ) ; +#12394 = ORIENTED_EDGE ( 'NONE', *, *, #5419, .F. ) ; +#12395 = CARTESIAN_POINT ( 'NONE', ( 20.04089027073307600, -30.66221341016735700, 28.85669429463132100 ) ) ; +#12396 = EDGE_CURVE ( 'NONE', #5504, #5812, #6017, .T. ) ; +#12397 = CARTESIAN_POINT ( 'NONE', ( 43.97704792023563400, -8.036904795788435900, 18.22047708379700700 ) ) ; +#12398 = FACE_OUTER_BOUND ( 'NONE', #12519, .T. ) ; +#12399 = CARTESIAN_POINT ( 'NONE', ( 0.6496112253394157300, -9.999999999999998200, -16.66595109963399300 ) ) ; +#12400 = CARTESIAN_POINT ( 'NONE', ( 6.282314481792587100E-015, -5.243728522504427200, -19.54800560866049300 ) ) ; +#12401 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -95.07596123493894400, 11.50239124669685100 ) ) ; +#12402 = CARTESIAN_POINT ( 'NONE', ( 6.173289142179927000, -30.65919470344505300, 21.91645589815244900 ) ) ; +#12403 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -31.29513776008465000, 28.74509265499354200 ) ) ; +#12404 = CARTESIAN_POINT ( 'NONE', ( 43.89747003685510400, -8.796767975200980400, -19.80658164805906600 ) ) ; +#12405 = AXIS2_PLACEMENT_3D ( 'NONE', #12812, #6808, #726 ) ; +#12406 = CARTESIAN_POINT ( 'NONE', ( 36.67252819247047300, -30.01416448890903500, 25.38425857154182500 ) ) ; +#12407 = CARTESIAN_POINT ( 'NONE', ( 8.150693702021856200, -100.0000000000000100, -2.025726487526195100 ) ) ; +#12408 = ORIENTED_EDGE ( 'NONE', *, *, #5713, .T. ) ; +#12409 = CARTESIAN_POINT ( 'NONE', ( 33.82655622678621700, -19.29797504316038100, 20.44497238390488600 ) ) ; +#12410 = CARTESIAN_POINT ( 'NONE', ( 33.56956327938306100, -30.74183746803762000, 27.10146953471798900 ) ) ; +#12411 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -93.58406699862018700, 0.4683665082786055400 ) ) ; +#12412 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#12413 = FACE_OUTER_BOUND ( 'NONE', #180, .T. ) ; +#12414 = CARTESIAN_POINT ( 'NONE', ( 0.5452132645458255300, 11.21014323262615500, -24.45478673545410000 ) ) ; +#12415 = CARTESIAN_POINT ( 'NONE', ( 12.33819635948572500, -30.96184001386468400, 27.41931531056273700 ) ) ; +#12416 = CARTESIAN_POINT ( 'NONE', ( 8.863541195039619700, -30.74999758030687500, 25.64373860005886700 ) ) ; +#12417 = EDGE_CURVE ( 'NONE', #3014, #4849, #5997, .T. ) ; +#12418 = CARTESIAN_POINT ( 'NONE', ( 2.602085213965210600E-015, -8.818730392947136600, -11.71557842168487400 ) ) ; +#12419 = CARTESIAN_POINT ( 'NONE', ( 35.45171401105193400, -9.649767505941873900, 25.00000000000000000 ) ) ; +#12420 = CARTESIAN_POINT ( 'NONE', ( 25.05794980690656700, -33.35025653084942100, 26.50741664928542100 ) ) ; +#12421 = EDGE_CURVE ( 'NONE', #9645, #3452, #648, .T. ) ; +#12422 = CARTESIAN_POINT ( 'NONE', ( 38.46145947107420700, -29.92155037463574600, 23.89125434374822600 ) ) ; +#12423 = CARTESIAN_POINT ( 'NONE', ( 11.40575731456753400, -17.07142213206140700, -25.06701809440318100 ) ) ; +#12424 = FACE_OUTER_BOUND ( 'NONE', #1520, .T. ) ; +#12425 = CARTESIAN_POINT ( 'NONE', ( 35.59233630428212800, -30.77587509529966800, 26.00898473339230000 ) ) ; +#12426 = CARTESIAN_POINT ( 'NONE', ( 13.02445646983256100, -32.71693464954876200, 25.39583836229380500 ) ) ; +#12427 = CARTESIAN_POINT ( 'NONE', ( 36.64467042110261700, -95.07596123493894400, 13.54325314912860500 ) ) ; +#12428 = CARTESIAN_POINT ( 'NONE', ( 43.63094198470718500, -9.164045471017605100, -19.97879437471753800 ) ) ; +#12429 = CARTESIAN_POINT ( 'NONE', ( 31.49874697127365400, -38.65132533477685700, 18.45418769069299400 ) ) ; +#12430 = CARTESIAN_POINT ( 'NONE', ( 6.893086434605781000, -30.35372680669366800, 24.23394883953867700 ) ) ; +#12431 = CARTESIAN_POINT ( 'NONE', ( 24.93760577854699200, -31.29661376143278100, 28.74483239613230600 ) ) ; +#12432 = CARTESIAN_POINT ( 'NONE', ( 31.33700977244941700, -30.81024125013816600, 27.91070596642158500 ) ) ; +#12433 = CARTESIAN_POINT ( 'NONE', ( 15.52719259539734700, -33.06432143316335700, 26.06946148843423600 ) ) ; +#12434 = EDGE_CURVE ( 'NONE', #3287, #494, #8767, .T. ) ; +#12435 = EDGE_LOOP ( 'NONE', ( #6312, #6333, #6497, #6608 ) ) ; +#12436 = CARTESIAN_POINT ( 'NONE', ( 39.99155857948727500, -29.79220083572695500, 21.72682940952743300 ) ) ; +#12437 = LINE ( 'NONE', #11972, #4340 ) ; +#12438 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12439 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999999100, -12.49999999999999600, 10.16044764857698400 ) ) ; +#12440 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, -1.200000000000008400 ) ) ; +#12441 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999997500, -94.74682992296712300, 18.71443453778741900 ) ) ; +#12442 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000005300, -100.0000000000000100, -25.63802908547508600 ) ) ; +#12443 = CARTESIAN_POINT ( 'NONE', ( 32.23256011354135400, -94.73833305799492200, 17.59190037867573200 ) ) ; +#12444 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -10.00000000000000000, -24.99999999999999600 ) ) ; +#12445 = CARTESIAN_POINT ( 'NONE', ( 5.125261971944253100, -29.72719434697612300, 22.05478291207382200 ) ) ; +#12446 = CARTESIAN_POINT ( 'NONE', ( 36.61187637960922800, -30.90083504210192400, 25.15110120888582700 ) ) ; +#12447 = VECTOR ( 'NONE', #1018, 1000.000000000000000 ) ; +#12448 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000400700, -94.56105280883907900, 14.57240401310288500 ) ) ; +#12449 = CARTESIAN_POINT ( 'NONE', ( 36.88897917088882400, -19.46986441872907400, 17.39942485981579900 ) ) ; +#12450 = EDGE_CURVE ( 'NONE', #5812, #7418, #3627, .T. ) ; +#12451 = CARTESIAN_POINT ( 'NONE', ( 33.45176447167976600, -30.32466665854492800, 27.17622229720482000 ) ) ; +#12452 = CARTESIAN_POINT ( 'NONE', ( 25.67709464807801800, -19.89239384426382900, 23.25133943474439800 ) ) ; +#12453 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #5092, #9175, #6122 ), + ( #72, #7182, #1081 ), + ( #8205, #2088, #9222 ), + ( #3094, #10231, #4108 ), + ( #11251, #5130, #12235 ), + ( #6171, #117, #7226 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( -5.854691731421723900E-018, 0.001573019043828476200, 0.003146038087656958400 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9829366249987530100, 1.000000000000000000), + ( 1.000000000000000000, 0.9809266202337411100, 1.000000000000000000), + ( 1.000000000000000000, 0.9779262205532355300, 1.000000000000000000), + ( 1.000000000000000000, 0.9705742025164587600, 1.000000000000000000), + ( 1.000000000000000000, 0.9661919187903345000, 1.000000000000000000), + ( 1.000000000000000000, 0.9613603877058488600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#12454 = CARTESIAN_POINT ( 'NONE', ( 7.623103330948998400, -18.00577708778108000, -22.29060398825723200 ) ) ; +#12455 = CARTESIAN_POINT ( 'NONE', ( 42.49563003279458700, -10.44154865655177600, -20.92187104639648600 ) ) ; +#12456 = CARTESIAN_POINT ( 'NONE', ( 12.33282008098543200, -30.75368554117701700, 27.47248348938701700 ) ) ; +#12457 = CARTESIAN_POINT ( 'NONE', ( 8.907145964080147100, -29.91933135373022500, 25.72757796044119900 ) ) ; +#12458 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#12459 = CARTESIAN_POINT ( 'NONE', ( 34.04509913855348900, -11.84091169946430000, 25.00000000000000400 ) ) ; +#12460 = CARTESIAN_POINT ( 'NONE', ( 24.85960462362698200, -27.96255689439434600, 27.45771657700780100 ) ) ; +#12461 = ADVANCED_FACE ( 'NONE', ( #9075, #352 ), #6422, .F. ) ; +#12462 = EDGE_LOOP ( 'NONE', ( #7729, #10766, #10484, #9631, #5097, #3159, #7289, #7975, #1727, #8431, #9230, #7320, #3602, #6987, #4088, #49, #1321, #5403, #1401, #6162 ) ) ; +#12463 = CARTESIAN_POINT ( 'NONE', ( 38.00918594366455500, -30.92338574505346200, 23.41741475505465800 ) ) ; +#12464 = CARTESIAN_POINT ( 'NONE', ( 5.672396214625695000, -95.07596123493895800, -0.5259895963430109000 ) ) ; +#12465 = ORIENTED_EDGE ( 'NONE', *, *, #4316, .T. ) ; +#12466 = CARTESIAN_POINT ( 'NONE', ( 35.40861920193134400, -29.81455798830449300, 26.09318391775707700 ) ) ; +#12467 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122092400, -0.1736481776669239200 ) ) ; +#12468 = VERTEX_POINT ( 'NONE', #376 ) ; +#12469 = ORIENTED_EDGE ( 'NONE', *, *, #1396, .T. ) ; +#12470 = EDGE_CURVE ( 'NONE', #11438, #2194, #2998, .T. ) ; +#12471 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#12472 = CARTESIAN_POINT ( 'NONE', ( 37.54373303781511600, -31.37695392414375900, 23.67498231718740000 ) ) ; +#12473 = CARTESIAN_POINT ( 'NONE', ( 7.282559284077920300, -29.26401563946608100, 24.08398015553280700 ) ) ; +#12474 = ORIENTED_EDGE ( 'NONE', *, *, #12254, .F. ) ; +#12475 = CARTESIAN_POINT ( 'NONE', ( 39.99269227742190200, -22.31883961653195000, -11.46400158446332400 ) ) ; +#12476 = CARTESIAN_POINT ( 'NONE', ( 31.33678577347586700, -30.82600370221963400, 27.90799186517739400 ) ) ; +#12477 = CARTESIAN_POINT ( 'NONE', ( 9.623286907568365600, -30.08976638953146200, 26.44085698362435000 ) ) ; +#12478 = EDGE_CURVE ( 'NONE', #11849, #5151, #8125, .T. ) ; +#12479 = AXIS2_PLACEMENT_3D ( 'NONE', #6459, #409, #7514 ) ; +#12480 = CARTESIAN_POINT ( 'NONE', ( 38.92827211295340100, -30.58004699913023200, 21.58660428016725100 ) ) ; +#12481 = ORIENTED_EDGE ( 'NONE', *, *, #3320, .F. ) ; +#12482 = AXIS2_PLACEMENT_3D ( 'NONE', #498, #7604, #1490 ) ; +#12483 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -99.99999999999998600, -38.36942826376122900 ) ) ; +#12484 = CARTESIAN_POINT ( 'NONE', ( 7.579444058923996000, -100.0000000000000300, -4.444869195815404500 ) ) ; +#12485 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8721, #1587, #11749, #5659, #12712, #6698, #621, #7738, #1626, #8764, #2623, #9763 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002218141860915701900, 0.003327212791373555600, 0.004436283721831409800, 0.006654425582747114700, 0.008872567443662821400 ), + .UNSPECIFIED. ) ; +#12486 = DIRECTION ( 'NONE', ( -0.9998119278664175900, 0.01909889591384044200, 0.003367650651352543800 ) ) ; +#12487 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2474, #8617, #4591, #11732, #5633, #12692, #6674, #598, #7713, #1607, #8745, #2603, #9745, #3626, #10753, #4632, #11771, #5679, #12731, #6720, #646, #7756, #1644, #8786 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002463585854197629600, 0.003695378781296442500, 0.004927171708395254900, 0.007390757562592885000, 0.008622550489691705200, 0.009854343416790523800, 0.01231792927098815400, 0.01354972219808697800, 0.01478151512518579800, 0.01724510097938344500, 0.01970868683358110000 ), + .UNSPECIFIED. ) ; +#12488 = CARTESIAN_POINT ( 'NONE', ( 14.05009299698438200, -97.50034312882135600, 21.44154207253302500 ) ) ; +#12489 = CARTESIAN_POINT ( 'NONE', ( 10.23536853048929300, -13.90357311408666900, -25.00000000000000000 ) ) ; +#12490 = PLANE ( 'NONE', #924 ) ; +#12491 = CARTESIAN_POINT ( 'NONE', ( 11.22288053559079100, -12.93425941442600900, 24.48261089683889900 ) ) ; +#12492 = CARTESIAN_POINT ( 'NONE', ( 6.175115262460352000, -28.92387295847762400, 22.22299756178500400 ) ) ; +#12493 = CARTESIAN_POINT ( 'NONE', ( 36.29993242112439600, -29.69828987749341900, 25.49506247513135500 ) ) ; +#12494 = ORIENTED_EDGE ( 'NONE', *, *, #12506, .F. ) ; +#12495 = CYLINDRICAL_SURFACE ( 'NONE', #2250, 14.99999999999999800 ) ; +#12496 = CARTESIAN_POINT ( 'NONE', ( 38.86130668384510800, -19.66817448132259500, 13.88501183006380300 ) ) ; +#12497 = EDGE_CURVE ( 'NONE', #9054, #10284, #1295, .T. ) ; +#12498 = CARTESIAN_POINT ( 'NONE', ( 33.47086798840727100, -30.65956157810877900, 27.16098201109165100 ) ) ; +#12499 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3863, #1646, #4926, #3846, #3821, #3803, #3758, #3715 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.003259453953008201700, 0.004889180929512303800, 0.006518907906016406000 ), + .UNSPECIFIED. ) ; +#12500 = CARTESIAN_POINT ( 'NONE', ( 42.78967363693310900, -10.15648037816249200, -20.65185148985720400 ) ) ; +#12501 = CARTESIAN_POINT ( 'NONE', ( 12.33818081230164200, -30.52242963229232200, 27.49684220683418800 ) ) ; +#12502 = CARTESIAN_POINT ( 'NONE', ( 9.038126713256568600, -31.05844111741575000, 25.52781169470959800 ) ) ; +#12503 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -99.99999999999998600, -40.86942826376123600 ) ) ; +#12504 = VERTEX_POINT ( 'NONE', #12550 ) ; +#12505 = CARTESIAN_POINT ( 'NONE', ( 38.11500560423130700, -29.55920391246381500, 24.02948415844039000 ) ) ; +#12506 = EDGE_CURVE ( 'NONE', #2631, #3401, #10, .T. ) ; +#12507 = CARTESIAN_POINT ( 'NONE', ( 35.52171601451997400, -30.56847708841786100, 26.13883584849697400 ) ) ; +#12508 = CARTESIAN_POINT ( 'NONE', ( 34.65692886765752700, -95.07596123493894400, 14.66484592974674500 ) ) ; +#12509 = CARTESIAN_POINT ( 'NONE', ( 7.672331318121709200, -95.07596123493894400, 13.78185651884839700 ) ) ; +#12510 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#12511 = CARTESIAN_POINT ( 'NONE', ( 35.67029737234342700, -31.32021948652875300, 16.83663281739954000 ) ) ; +#12512 = ADVANCED_FACE ( 'NONE', ( #10801 ), #10500, .T. ) ; +#12513 = CARTESIAN_POINT ( 'NONE', ( 7.074601179186659600, -30.70719283909030800, 24.04999572329664700 ) ) ; +#12514 = CARTESIAN_POINT ( 'NONE', ( 39.93323139006076200, -20.04430539619738000, -10.05558756513438600 ) ) ; +#12515 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983400, 27.93782961424065500 ) ) ; +#12516 = CARTESIAN_POINT ( 'NONE', ( 5.362191146250844500, -30.60265973876209200, 23.42187989377859800 ) ) ; +#12517 = VECTOR ( 'NONE', #2534, 1000.000000000000000 ) ; +#12518 = CARTESIAN_POINT ( 'NONE', ( 39.85870976604191200, -29.47783736753664400, 21.89264259730173000 ) ) ; +#12519 = EDGE_LOOP ( 'NONE', ( #9327, #9487, #9538, #9978 ) ) ; +#12520 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -39.52045731841470700, 19.79474689191102500 ) ) ; +#12521 = CARTESIAN_POINT ( 'NONE', ( 7.579444058923996000, -12.49999999999999600, 10.98374161617470300 ) ) ; +#12522 = ADVANCED_FACE ( 'NONE', ( #2364 ), #12087, .F. ) ; +#12523 = CARTESIAN_POINT ( 'NONE', ( 19.95405457413379900, -33.17879905958958600, 28.41295234537446700 ) ) ; +#12524 = CARTESIAN_POINT ( 'NONE', ( 10.53978229894243900, -94.73201375282238200, 16.75006639166356900 ) ) ; +#12525 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9568, #2415, #10571, #4449, #11598, #5490, #12558, #6525, #467, #7571 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001065464361979365400, 0.002130928723958730900, 0.003196393085938096500, 0.004261857447917461800 ), + .UNSPECIFIED. ) ; +#12526 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -19.99999999999987600, -9.768600821713835800 ) ) ; +#12527 = EDGE_CURVE ( 'NONE', #10132, #10284, #9764, .T. ) ; +#12528 = CARTESIAN_POINT ( 'NONE', ( 10.34139702526371400, -14.44489329312516500, -24.99173194753449300 ) ) ; +#12529 = CARTESIAN_POINT ( 'NONE', ( 13.93458901498457400, -15.98867163693640900, 23.94403561180463700 ) ) ; +#12530 = CIRCLE ( 'NONE', #4228, 3.189999999999995100 ) ; +#12531 = CARTESIAN_POINT ( 'NONE', ( 5.291221346372715600, -30.08436615310129600, 22.10483268626834200 ) ) ; +#12532 = CARTESIAN_POINT ( 'NONE', ( 24.81280744310813100, -31.29913968154957600, 28.74438700826459600 ) ) ; +#12533 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000003600, -95.07596123493894400, 11.50239124669686300 ) ) ; +#12534 = CARTESIAN_POINT ( 'NONE', ( 39.71443879261491400, -19.83139002347366600, 10.99295894465354600 ) ) ; +#12535 = CARTESIAN_POINT ( 'NONE', ( 13.51823670372232300, -95.07596123493894400, 14.90794226952291100 ) ) ; +#12536 = CARTESIAN_POINT ( 'NONE', ( 33.45270641778537200, -31.02840379501116900, 27.05429599933732700 ) ) ; +#12537 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 9.500000000000000000, -1.981438871123700300 ) ) ; +#12538 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#12539 = CARTESIAN_POINT ( 'NONE', ( 43.07726794505248300, -9.844071347006938300, -20.40091288324714500 ) ) ; +#12540 = CARTESIAN_POINT ( 'NONE', ( 12.74002000270619700, -30.81923962185697300, 27.60878143271377600 ) ) ; +#12541 = CARTESIAN_POINT ( 'NONE', ( 8.930818257366427200, -30.28789106724544000, 25.82030146335570500 ) ) ; +#12542 = DIRECTION ( 'NONE', ( -0.01909913463907092100, -0.9998175948922076700, 0.0000000000000000000 ) ) ; +#12543 = CARTESIAN_POINT ( 'NONE', ( 33.24561839105192700, -30.90259938947534500, 27.25513505366710700 ) ) ; +#12544 = CARTESIAN_POINT ( 'NONE', ( 34.73868591139390100, -11.47935925948576500, 24.73914904839177400 ) ) ; +#12545 = EDGE_CURVE ( 'NONE', #2194, #3287, #7428, .T. ) ; +#12546 = EDGE_LOOP ( 'NONE', ( #12286, #9438, #530, #1462, #2240, #3037 ) ) ; +#12547 = CARTESIAN_POINT ( 'NONE', ( 38.11500857709893400, -30.68070184132820400, 23.83163913133966000 ) ) ; +#12548 = SPHERICAL_SURFACE ( 'NONE', #985, 2.500000000000000000 ) ; +#12549 = CARTESIAN_POINT ( 'NONE', ( 35.40298369849067200, -31.16429340192700100, 25.84630171393243000 ) ) ; +#12550 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999300, -12.50000000000001800, 22.05918254822885800 ) ) ; +#12551 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.500000000000000000, 25.00000000000000400 ) ) ; +#12552 = CARTESIAN_POINT ( 'NONE', ( 38.25372131311990400, -34.13396898742409700, 12.66167394920641200 ) ) ; +#12553 = CARTESIAN_POINT ( 'NONE', ( 7.074591499879209900, -29.60901216805909900, 24.24364178832100300 ) ) ; +#12554 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983000, 27.93782961424065500 ) ) ; +#12555 = CIRCLE ( 'NONE', #3930, 3.189999999999995100 ) ; +#12556 = CARTESIAN_POINT ( 'NONE', ( 39.08970216107986300, -30.52932968794677700, 21.71184567682884700 ) ) ; +#12557 = CARTESIAN_POINT ( 'NONE', ( 4.352203398336400600, -18.50851635255827100, -7.338451009430458200 ) ) ; +#12558 = CARTESIAN_POINT ( 'NONE', ( 44.92224777120616600, 10.13028869250943700, -16.78864349177027600 ) ) ; +#12559 = CARTESIAN_POINT ( 'NONE', ( 7.007238396689306400, -93.12022781676812100, 19.56393215560076000 ) ) ; +#12560 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.3227915468451920100, -0.9464700826150228600 ) ) ; +#12561 = EDGE_CURVE ( 'NONE', #3452, #4031, #12792, .T. ) ; +#12562 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000001800, 9.500000000000000000, -24.99999999999999600 ) ) ; +#12563 = CARTESIAN_POINT ( 'NONE', ( 10.09292272124467300, -10.00000000000000000, 25.00000000000000000 ) ) ; +#12564 = CARTESIAN_POINT ( 'NONE', ( 16.56042755206466300, -18.07551582811637300, 23.57606867636487300 ) ) ; +#12565 = CARTESIAN_POINT ( 'NONE', ( 6.031329229825894700, -29.01456881491072800, 22.30347490509980100 ) ) ; +#12566 = CARTESIAN_POINT ( 'NONE', ( 24.87520792494898100, -31.29794767705909600, 28.74459719081739500 ) ) ; +#12567 = CARTESIAN_POINT ( 'NONE', ( 10.86030496627523500, -30.99433289264674600, 26.73304490329420000 ) ) ; +#12568 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12569 = CARTESIAN_POINT ( 'NONE', ( 16.08788196514684900, -89.23582230748374400, 10.53559886736104200 ) ) ; +#12570 = CARTESIAN_POINT ( 'NONE', ( 33.26894440680613500, -30.57374419248784400, 27.25571409792658500 ) ) ; +#12571 = CARTESIAN_POINT ( 'NONE', ( 10.11423849738445600, -13.36407974370901500, -30.00000000000001800 ) ) ; +#12572 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12573 = CARTESIAN_POINT ( 'NONE', ( 44.35039290416551000, -9.999999999999998200, -16.66595216622816300 ) ) ; +#12574 = CARTESIAN_POINT ( 'NONE', ( 12.74042495403859100, -30.65090253031083000, 27.63455391566384400 ) ) ; +#12575 = EDGE_CURVE ( 'NONE', #11256, #11167, #10172, .T. ) ; +#12576 = CARTESIAN_POINT ( 'NONE', ( 9.249949182842103200, -31.16875864918531400, 25.58198773011422500 ) ) ; +#12577 = FACE_OUTER_BOUND ( 'NONE', #12785, .T. ) ; +#12578 = CARTESIAN_POINT ( 'NONE', ( 18.84879914077251300, -21.64531066004784800, -27.05338246809826300 ) ) ; +#12579 = CARTESIAN_POINT ( 'NONE', ( 36.97151641256913000, -29.20324862923749600, 25.63907496365913400 ) ) ; +#12580 = CARTESIAN_POINT ( 'NONE', ( 35.15837664057512800, -10.02465726368899500, 24.99565225914119200 ) ) ; +#12581 = ADVANCED_FACE ( 'NONE', ( #5058 ), #9854, .F. ) ; +#12582 = CARTESIAN_POINT ( 'NONE', ( 37.80516800926150700, -29.24212143342557000, 23.98101872270944700 ) ) ; +#12583 = CARTESIAN_POINT ( 'NONE', ( 35.23354798122961300, -30.43248873084314400, 26.32423643858521000 ) ) ; +#12584 = VERTEX_POINT ( 'NONE', #7773 ) ; +#12585 = CIRCLE ( 'NONE', #9244, 7.500000000000000000 ) ; +#12586 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12587 = CARTESIAN_POINT ( 'NONE', ( 39.96772822918639900, -28.17430490409907100, 12.01230829561821200 ) ) ; +#12588 = CARTESIAN_POINT ( 'NONE', ( 7.440006841827263400, -31.00222391840200200, 23.96585613429928700 ) ) ; +#12589 = CARTESIAN_POINT ( 'NONE', ( 20.14523662643411900, -30.65997555879740600, 28.85708888820665800 ) ) ; +#12590 = CARTESIAN_POINT ( 'NONE', ( 31.23401461457654100, -30.82655086342983000, 27.93782961424065500 ) ) ; +#12591 = CARTESIAN_POINT ( 'NONE', ( 24.84990777206995500, -33.18274856558011300, 28.41225594090786500 ) ) ; +#12592 = EDGE_CURVE ( 'NONE', #4250, #12155, #5006, .T. ) ; +#12593 = CARTESIAN_POINT ( 'NONE', ( 39.31468894771933300, -29.09645334164768500, 22.01788044004531000 ) ) ; +#12594 = CARTESIAN_POINT ( 'NONE', ( 1.814623159898665300, -9.647633476895597600, 16.89545867728058300 ) ) ; +#12595 = CARTESIAN_POINT ( 'NONE', ( 7.816543822095362700, -100.0000000000000300, -3.223838349584533100 ) ) ; +#12596 = ORIENTED_EDGE ( 'NONE', *, *, #11821, .T. ) ; +#12597 = DIRECTION ( 'NONE', ( 0.8436717434443438100, 0.5368593757340757200, 0.0000000000000000000 ) ) ; +#12598 = CARTESIAN_POINT ( 'NONE', ( 2.501097020554920100, -9.240536455385907300, -23.55289141356945500 ) ) ; +#12599 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -97.04531648070918900, 16.23785755017283700 ) ) ; +#12600 = CARTESIAN_POINT ( 'NONE', ( 34.16926504969708800, -12.50000000000000000, -18.87209004717001900 ) ) ; +#12601 = CARTESIAN_POINT ( 'NONE', ( 35.09901089502054100, -18.27916259819256000, -24.44703187520326200 ) ) ; +#12602 = CARTESIAN_POINT ( 'NONE', ( 20.00000000068497700, -19.13175989804976100, 23.38981055321568500 ) ) ; +#12603 = CARTESIAN_POINT ( 'NONE', ( 5.958561912328597100, -30.54458585054391400, 22.34048344825829300 ) ) ; +#12604 = CARTESIAN_POINT ( 'NONE', ( 5.373426396349442400, -28.72653875008481700, 18.99689838411215000 ) ) ; +#12605 = EDGE_LOOP ( 'NONE', ( #1106, #11082, #932, #10260 ) ) ; +#12606 = CARTESIAN_POINT ( 'NONE', ( 10.84125659180115200, -30.47704445651700000, 26.86440056804931600 ) ) ; +#12607 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000900, 17.50000000000000400 ) ) ; +#12609 = EDGE_CURVE ( 'NONE', #3592, #2313, #4730, .T. ) ; +#12608 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -95.07596123493894400, 9.998812624573380600 ) ) ; +#12610 = CARTESIAN_POINT ( 'NONE', ( 33.26493241793309600, -30.90712263973221100, 27.18754830482539100 ) ) ; +#12611 = ORIENTED_EDGE ( 'NONE', *, *, #885, .T. ) ; +#12612 = CARTESIAN_POINT ( 'NONE', ( 38.50433884264337800, -33.74419138908468300, 12.27932788241867000 ) ) ; +#12613 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#12614 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 9.500000000000000000, -25.00000000000000000 ) ) ; +#12615 = CARTESIAN_POINT ( 'NONE', ( 12.94443263740211200, -30.87591158666227600, 27.66768826796472800 ) ) ; +#12616 = ORIENTED_EDGE ( 'NONE', *, *, #3320, .T. ) ; +#12617 = CARTESIAN_POINT ( 'NONE', ( 9.104669510902374100, -30.50283280506145500, 25.91724960889651900 ) ) ; +#12618 = CARTESIAN_POINT ( 'NONE', ( 5.717472393966525700E-018, 9.723952627011016100, -15.80112425796744300 ) ) ; +#12619 = CARTESIAN_POINT ( 'NONE', ( 38.99790722170337900, -28.88147714172238900, 21.70937197210940500 ) ) ; +#12620 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -99.99999999999998600, -6.100827442047409100 ) ) ; +#12621 = ORIENTED_EDGE ( 'NONE', *, *, #12653, .F. ) ; +#12622 = CARTESIAN_POINT ( 'NONE', ( 38.20562416305421700, -30.33718917599662700, 24.12937102746963100 ) ) ; +#12623 = CARTESIAN_POINT ( 'NONE', ( -6.491268419069336300E-013, -9.952041227441910100, -12.55031874238245100 ) ) ; +#12624 = CARTESIAN_POINT ( 'NONE', ( 35.15097925644398200, -31.11127451719856300, 26.06722618564812400 ) ) ; +#12625 = CARTESIAN_POINT ( 'NONE', ( 33.49577361853187800, -16.52174613915108700, -25.14922867224263900 ) ) ; +#12626 = EDGE_LOOP ( 'NONE', ( #10117, #7755 ) ) ; +#12627 = EDGE_CURVE ( 'NONE', #11438, #3916, #2650, .T. ) ; +#12628 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.500000000000000000, -23.00000000000000000 ) ) ; +#12629 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000002100, -27.09143239524033900, 6.754920151478382100 ) ) ; +#12630 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #12007, #12090, #11647 ), + ( #11563, #11519, #11464 ), + ( #11433, #11417, #11388 ), + ( #11366, #11325, #11283 ), + ( #11008, #10964, #10916 ), + ( #10870, #3825, #3779 ), + ( #3735, #10831, #10791 ), + ( #10661, #10620, #10580 ), + ( #10542, #10504, #10455 ), + ( #10440, #10409, #10365 ), + ( #10348, #10301, #10256 ), + ( #10215, #10174, #10121 ), + ( #9949, #9864, #9822 ), + ( #9774, #9738, #9697 ), + ( #9654, #9615, #9574 ), + ( #9532, #9489, #10075 ), + ( #10038, #9996, #9445 ), + ( #9431, #9406, #9388 ), + ( #9353, #9333, #9291 ), + ( #9252, #9207, #9159 ), + ( #9119, #9077, #9033 ), + ( #8986, #8944, #8903 ), + ( #8856, #8820, #8779 ), + ( #8736, #8566, #8487 ), + ( #8424, #8388, #8367 ), + ( #8327, #8286, #8239 ), + ( #8189, #8101, #8055 ), + ( #8015, #7974, #7927 ), + ( #7881, #7840, #7798 ), + ( #7749, #7706, #7665 ), + ( #7623, #7580, #7500 ), + ( #7392, #7345, #7301 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 4.336808689942017700E-018, 0.004636758949342871200, 0.006955138424014304200, 0.008114328161350020700, 0.009273517898685737200, 0.01159189737335717200, 0.01391027684802860500, 0.01622865632270003800, 0.01854703579737147100, 0.02086541527204290400, 0.02318379474671433700, 0.02550217422138577000, 0.02782055369605720300, 0.03013893317072863600, 0.03245731264540006900, 0.03709407159474293500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865472400, 1.000000000000000000), + ( 1.000000000000000000, 0.7075970115851479800, 1.000000000000000000), + ( 1.000000000000000000, 0.7089342781764808000, 1.000000000000000000), + ( 1.000000000000000000, 0.7125796301019767800, 1.000000000000000000), + ( 1.000000000000000000, 0.7140698102571809700, 1.000000000000000000), + ( 1.000000000000000000, 0.7168373401183116800, 1.000000000000000000), + ( 1.000000000000000000, 0.7178507260434575700, 1.000000000000000000), + ( 1.000000000000000000, 0.7200597284458610800, 1.000000000000000000), + ( 1.000000000000000000, 0.7212577850635534200, 1.000000000000000000), + ( 1.000000000000000000, 0.7251801945351380500, 1.000000000000000000), + ( 1.000000000000000000, 0.7282239506893722900, 1.000000000000000000), + ( 1.000000000000000000, 0.7355883659197529600, 1.000000000000000000), + ( 1.000000000000000000, 0.7399030273286153500, 1.000000000000000000), + ( 1.000000000000000000, 0.7505781663299722100, 1.000000000000000000), + ( 1.000000000000000000, 0.7569857375930095800, 1.000000000000000000), + ( 1.000000000000000000, 0.7725544161116160200, 1.000000000000000000), + ( 1.000000000000000000, 0.7817932707448991300, 1.000000000000000000), + ( 1.000000000000000000, 0.8032601027474262100, 1.000000000000000000), + ( 1.000000000000000000, 0.8154725684498491700, 1.000000000000000000), + ( 1.000000000000000000, 0.8413182052524375000, 1.000000000000000000), + ( 1.000000000000000000, 0.8549709358406896200, 1.000000000000000000), + ( 1.000000000000000000, 0.8813318193166288500, 1.000000000000000000), + ( 1.000000000000000000, 0.8940734682849781300, 1.000000000000000000), + ( 1.000000000000000000, 0.9178094688767076700, 1.000000000000000000), + ( 1.000000000000000000, 0.9288170236501236400, 1.000000000000000000), + ( 1.000000000000000000, 0.9486983996575473200, 1.000000000000000000), + ( 1.000000000000000000, 0.9575978644375778800, 1.000000000000000000), + ( 1.000000000000000000, 0.9728939500836474300, 1.000000000000000000), + ( 1.000000000000000000, 0.9793108764826397000, 1.000000000000000000), + ( 1.000000000000000000, 0.9947802711183105800, 1.000000000000000000), + ( 1.000000000000000000, 1.000014330393689700, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#12631 = CARTESIAN_POINT ( 'NONE', ( 7.071952038997023000, -30.03964741775311300, 24.47759925433484800 ) ) ; +#12632 = CARTESIAN_POINT ( 'NONE', ( 15.65273288871554100, -28.08123352512465600, 26.96594673378585900 ) ) ; +#12633 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000001400, 7.000000000000000900, 20.69000000000000100 ) ) ; +#12634 = EDGE_CURVE ( 'NONE', #6679, #3874, #347, .T. ) ; +#12635 = CARTESIAN_POINT ( 'NONE', ( 39.62150400837776200, -30.24160557518308000, 21.81146038722547000 ) ) ; +#12636 = AXIS2_PLACEMENT_3D ( 'NONE', #5695, #12745, #6734 ) ; +#12637 = CARTESIAN_POINT ( 'NONE', ( 37.82724923474893300, -95.07596123493894400, 12.92977595461371000 ) ) ; +#12638 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12639 = ORIENTED_EDGE ( 'NONE', *, *, #4482, .F. ) ; +#12640 = ADVANCED_FACE ( 'NONE', ( #7496 ), #11144, .F. ) ; +#12641 = LOCAL_TIME ( 17, 45, 49.00000000000000000, #2197 ) ; +#12642 = CARTESIAN_POINT ( 'NONE', ( 17.77959742828161900, -95.07596123493895800, 16.84441436666264400 ) ) ; +#12643 = CARTESIAN_POINT ( 'NONE', ( 37.70550805502674800, -99.99999999999997200, 18.52319207392969200 ) ) ; +#12644 = CARTESIAN_POINT ( 'NONE', ( 39.99754482299691500, -27.40876213439641500, 8.308253179799397300 ) ) ; +#12645 = CARTESIAN_POINT ( 'NONE', ( 15.65273288871555500, -28.08123352512465900, 26.96594673378586300 ) ) ; +#12646 = CARTESIAN_POINT ( 'NONE', ( 17.19287868669144000, -19.14708048798217600, 23.11853876627198500 ) ) ; +#12647 = CARTESIAN_POINT ( 'NONE', ( 5.686396102538649800, -29.37334394268809800, 22.54419031237419100 ) ) ; +#12648 = CARTESIAN_POINT ( 'NONE', ( 8.590823439539535800, -26.35322856802372000, 16.90995161035350900 ) ) ; +#12649 = CARTESIAN_POINT ( 'NONE', ( 10.55662763913254500, -100.0000000000000100, -33.98982960013365300 ) ) ; +#12650 = CARTESIAN_POINT ( 'NONE', ( 10.96920742190539700, -31.08615979260188300, 26.74080474440341200 ) ) ; +#12651 = EDGE_CURVE ( 'NONE', #6316, #4514, #1734, .T. ) ; +#12652 = CARTESIAN_POINT ( 'NONE', ( 0.03371405137621587300, -5.591900855362091200, -19.81993730144043700 ) ) ; +#12653 = EDGE_CURVE ( 'NONE', #3916, #1692, #8806, .T. ) ; +#12654 = CARTESIAN_POINT ( 'NONE', ( 31.14051496310451100, -28.14421086525447200, 26.49738708827184700 ) ) ; +#12655 = CARTESIAN_POINT ( 'NONE', ( 33.16171491769716100, -30.45186997788488300, 27.30209958338871000 ) ) ; +#12656 = CARTESIAN_POINT ( 'NONE', ( 30.86079104094228100, -38.80943941801211800, 18.72008847555553900 ) ) ; +#12657 = CIRCLE ( 'NONE', #2453, 5.000000000000001800 ) ; +#12658 = ORIENTED_EDGE ( 'NONE', *, *, #12592, .T. ) ; +#12659 = CARTESIAN_POINT ( 'NONE', ( 12.94475981620554400, -30.74306549081057900, 27.69356229785632800 ) ) ; +#12660 = CARTESIAN_POINT ( 'NONE', ( 39.68470294508929900, -29.24096474939454600, 21.69221924096997300 ) ) ; +#12661 = CARTESIAN_POINT ( 'NONE', ( 9.249559495467620400, -29.70048591140704300, 25.84147552037384100 ) ) ; +#12662 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999997300, -97.04517183358916600, 16.23828164244106600 ) ) ; +#12663 = CARTESIAN_POINT ( 'NONE', ( 17.07934984245770900, -28.05956875461022500, 27.34257568895255700 ) ) ; +#12664 = CARTESIAN_POINT ( 'NONE', ( 3.891499387019121700, -10.11516246320120300, -23.31348048099353000 ) ) ; +#12665 = CARTESIAN_POINT ( 'NONE', ( 37.66662773650275400, -29.19809058170129400, 24.05131695069461600 ) ) ; +#12666 = CARTESIAN_POINT ( 'NONE', ( 0.5867386534930451000, -10.50701169118648600, -15.25061841886738600 ) ) ; +#12667 = EDGE_CURVE ( 'NONE', #4073, #11877, #7164, .T. ) ; +#12668 = CYLINDRICAL_SURFACE ( 'NONE', #3141, 3.189999999999994200 ) ; +#12669 = CARTESIAN_POINT ( 'NONE', ( 35.01347403391041300, -30.20383177547104500, 26.42349246306504200 ) ) ; +#12670 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#12671 = CARTESIAN_POINT ( 'NONE', ( 7.612040541026365400, -31.07259014498793400, 24.05270524960167600 ) ) ; +#12672 = CARTESIAN_POINT ( 'NONE', ( 11.54255316113054700, -29.00780592867310400, 27.50593561090154500 ) ) ; +#12673 = CARTESIAN_POINT ( 'NONE', ( 6.060249138650293700, -30.56614510164166300, 21.52590704258784300 ) ) ; +#12674 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11897, #777, #1777, #8918, #2785, #9919, #3792, #10931, #4822, #11941 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001065464361979366300, 0.002130928723958732600, 0.003196393085938099100, 0.004261857447917465200 ), + .UNSPECIFIED. ) ; +#12675 = CARTESIAN_POINT ( 'NONE', ( 7.586162552043665700, -95.07662705373283500, 13.35536673198048900 ) ) ; +#12676 = CARTESIAN_POINT ( 'NONE', ( 38.85401983906819400, -28.93523976410197600, 22.21964592652751900 ) ) ; +#12677 = VECTOR ( 'NONE', #2085, 1000.000000000000000 ) ; +#12678 = CARTESIAN_POINT ( 'NONE', ( 7.816543822095362700, -12.49999999999999600, 12.20477246240557500 ) ) ; +#12679 = ORIENTED_EDGE ( 'NONE', *, *, #10819, .F. ) ; +#12680 = CARTESIAN_POINT ( 'NONE', ( 6.764895551862412800, -94.67500048867452700, 8.080024367542359100 ) ) ; +#12681 = CARTESIAN_POINT ( 'NONE', ( 8.125016952883649100E-032, -8.815190633422819400, 8.775152788813965500 ) ) ; +#12682 = CARTESIAN_POINT ( 'NONE', ( 15.45093844490861900, -30.77347370972945500, 28.36765821957495200 ) ) ; +#12683 = CARTESIAN_POINT ( 'NONE', ( 34.55639170700560900, -17.90991656312778700, -24.55827157316495900 ) ) ; +#12684 = CARTESIAN_POINT ( 'NONE', ( 12.50880000390720400, -19.24766994554558900, 21.33631377643852300 ) ) ; +#12685 = CARTESIAN_POINT ( 'NONE', ( 6.427609704470508900, -30.78218039991818600, 22.49190893689480900 ) ) ; +#12686 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -12.50000000000000400, -22.94081745177113200 ) ) ; +#12687 = CARTESIAN_POINT ( 'NONE', ( 0.8450799996949932600, -7.781481582010830100, -21.43596316075076300 ) ) ; +#12688 = CARTESIAN_POINT ( 'NONE', ( 10.93534039926289500, -30.62300931288173800, 26.89501967787731800 ) ) ; +#12689 = CARTESIAN_POINT ( 'NONE', ( 39.89737095817741900, -25.84486553748277500, 8.790903943726025500 ) ) ; +#12690 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12691 = CARTESIAN_POINT ( 'NONE', ( 33.17088999770501100, -30.77135504577178400, 27.26758334558013500 ) ) ; +#12692 = CARTESIAN_POINT ( 'NONE', ( 8.144153624325030100, -12.50000000000001200, 13.38315026120828000 ) ) ; +#12693 = CYLINDRICAL_SURFACE ( 'NONE', #3353, 3.189999999999994200 ) ; +#12694 = CARTESIAN_POINT ( 'NONE', ( 42.49999999999999300, 12.00000000000000000, -22.50000000000000000 ) ) ; +#12695 = CARTESIAN_POINT ( 'NONE', ( 13.25130408827196700, -30.87365051341256000, 27.77010889438978900 ) ) ; +#12696 = CARTESIAN_POINT ( 'NONE', ( 9.214430242088662100, -30.71426396265299300, 25.91367306015879300 ) ) ; +#12697 = CARTESIAN_POINT ( 'NONE', ( 3.425525692232809200, -9.273957241554393600, -24.26550510319410100 ) ) ; +#12698 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3955, #10077, #12092, #6022 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0005634097713045025400 ), + .UNSPECIFIED. ) ; +#12699 = EDGE_CURVE ( 'NONE', #3116, #5340, #6418, .T. ) ; +#12700 = CARTESIAN_POINT ( 'NONE', ( 10.72105834097569900, -12.96493372714059900, -25.00000000001312700 ) ) ; +#12701 = ORIENTED_EDGE ( 'NONE', *, *, #9741, .T. ) ; +#12702 = CARTESIAN_POINT ( 'NONE', ( 38.12211750280829400, -30.09188811860610000, 24.29389721069642900 ) ) ; +#12703 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, -5.972428716503305400, -18.28779850663900300 ) ) ; +#12704 = EDGE_CURVE ( 'NONE', #2182, #9162, #9552, .T. ) ; +#12705 = VECTOR ( 'NONE', #4962, 1000.000000000000000 ) ; +#12706 = CARTESIAN_POINT ( 'NONE', ( 35.01347037681899400, -30.89375089360442700, 26.30185440418844300 ) ) ; +#12707 = CARTESIAN_POINT ( 'NONE', ( 12.12384502866602500, -10.03178442016576500, -24.99999999999690600 ) ) ; +#12708 = CARTESIAN_POINT ( 'NONE', ( 42.79289321881345400, 12.00000000000000000, -23.96446609406725500 ) ) ; +#12709 = CARTESIAN_POINT ( 'NONE', ( 6.944390481822671800, -23.14528770196486500, -19.60247691193739400 ) ) ; +#12710 = CARTESIAN_POINT ( 'NONE', ( 7.206174830059317100, -30.32285548831039500, 24.57785057971377500 ) ) ; +#12711 = CARTESIAN_POINT ( 'NONE', ( 8.326407940445095700, -31.10889670283096500, 25.48554527845690700 ) ) ; +#12712 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999998600, -8.296854121945811400, -14.44513285134944900 ) ) ; +#12713 = CARTESIAN_POINT ( 'NONE', ( 45.01152272973836000, -95.07596123493894400, -3.205230653520644500 ) ) ; +#12714 = CARTESIAN_POINT ( 'NONE', ( 39.85888922054839900, -29.90696879929131300, 22.02330005938692300 ) ) ; +#12715 = LINE ( 'NONE', #1905, #2276 ) ; +#12716 = CARTESIAN_POINT ( 'NONE', ( 5.176707763710866500, -22.52176480951950700, -9.571851144796058400 ) ) ; +#12717 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -21.11601202432798300, -10.17105575066382400 ) ) ; +#12718 = CARTESIAN_POINT ( 'NONE', ( 1.795438797635995300E-013, -5.493435652316740900, 15.49561061972849700 ) ) ; +#12719 = CARTESIAN_POINT ( 'NONE', ( 10.13738603844029600, -20.06972565649488200, -23.83076673851681800 ) ) ; +#12720 = EDGE_CURVE ( 'NONE', #6622, #6296, #4016, .T. ) ; +#12721 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -30.66316004086981200, 28.85652737809771300 ) ) ; +#12722 = CARTESIAN_POINT ( 'NONE', ( 33.48707838542902200, -16.47320745674969800, -25.15648821085609700 ) ) ; +#12723 = CARTESIAN_POINT ( 'NONE', ( 5.591851801148551200, -29.78526148976023100, 22.70986485823806000 ) ) ; +#12724 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000186200, -9.999163045034068300, 8.161041186470388500 ) ) ; +#12725 = ORIENTED_EDGE ( 'NONE', *, *, #7870, .T. ) ; +#12726 = CARTESIAN_POINT ( 'NONE', ( 11.13253669798524600, -99.99999999999998600, 20.16526913155304600 ) ) ; +#12727 = CARTESIAN_POINT ( 'NONE', ( 10.96929688264123500, -30.17252087561076500, 26.90171727681709500 ) ) ; +#12728 = CYLINDRICAL_SURFACE ( 'NONE', #8137, 5.000000000000000900 ) ; +#12729 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000001400, -94.74682992296695300, 18.71443453778785600 ) ) ; +#12730 = CARTESIAN_POINT ( 'NONE', ( 32.86136747448964700, -30.47390448814166000, 27.42193875894891200 ) ) ; +#12731 = CARTESIAN_POINT ( 'NONE', ( 14.79104119849094300, -12.50000000000001400, 20.90854921098042900 ) ) ; +#12732 = CARTESIAN_POINT ( 'NONE', ( 1.049262658266045800, -8.074363754072729500, 17.21664755057670200 ) ) ; +#12733 = CARTESIAN_POINT ( 'NONE', ( 44.99999999999997900, -5.000000000000134100, -19.35342349036124400 ) ) ; +#12734 = CARTESIAN_POINT ( 'NONE', ( 13.25254729116676000, -30.79657295629359100, 27.78581929146165000 ) ) ; +#12735 = EDGE_CURVE ( 'NONE', #4031, #3916, #12197, .T. ) ; +#12736 = CARTESIAN_POINT ( 'NONE', ( 9.284864482082461700, -29.90152045539409200, 25.94998321856591900 ) ) ; +#12737 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12738 = CARTESIAN_POINT ( 'NONE', ( 37.62489508604364400, -11.02442033815124300, 23.71311124396909200 ) ) ; +#12739 = CARTESIAN_POINT ( 'NONE', ( 6.009924721527134700, -10.29202074645038100, -24.58815706476031700 ) ) ; +#12740 = CARTESIAN_POINT ( 'NONE', ( 1.922510756080199700, -9.843785236305189200, -20.40075545295498900 ) ) ; +#12741 = FACE_OUTER_BOUND ( 'NONE', #3504, .T. ) ; +#12742 = CARTESIAN_POINT ( 'NONE', ( 37.68555288973275500, -31.00881367658701400, 23.74868224320758600 ) ) ; +#12743 = CARTESIAN_POINT ( 'NONE', ( 24.89671145299328700, -30.66083836454515000, 28.85693675227421900 ) ) ; +#12744 = CARTESIAN_POINT ( 'NONE', ( 34.60174487498139900, -30.06073486164130400, 26.60552054823363100 ) ) ; +#12745 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.3228370549872320900, -0.9464545609416076300 ) ) ; +#12746 = CARTESIAN_POINT ( 'NONE', ( 11.47763131199311600, -10.85204142098631200, -25.05198869345818100 ) ) ; +#12747 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12748 = CARTESIAN_POINT ( 'NONE', ( 16.02089061246022100, -23.86417668633850300, -26.93395952536105800 ) ) ; +#12749 = CARTESIAN_POINT ( 'NONE', ( 7.595255394371674700, -29.29167359010153500, 24.38320335653987300 ) ) ; +#12750 = EDGE_LOOP ( 'NONE', ( #5358, #5651, #5827, #6134, #6281, #6467, #6594, #6766, #7138, #7430 ) ) ; +#12751 = CARTESIAN_POINT ( 'NONE', ( 42.26097180423157300, -10.66904422474144800, -21.13735715243748800 ) ) ; +#12752 = CARTESIAN_POINT ( 'NONE', ( 38.15327037024916000, -95.07596123493894400, 2.206608581395811200 ) ) ; +#12753 = EDGE_CURVE ( 'NONE', #8267, #11167, #4413, .T. ) ; +#12754 = CARTESIAN_POINT ( 'NONE', ( 38.82311188630651300, -30.66072386374262800, 21.91663978075388600 ) ) ; +#12755 = VERTEX_POINT ( 'NONE', #12537 ) ; +#12756 = ORIENTED_EDGE ( 'NONE', *, *, #1886, .T. ) ; +#12757 = CARTESIAN_POINT ( 'NONE', ( 42.49999999999999300, 12.00000000000000000, -22.50000000000000000 ) ) ; +#12758 = CARTESIAN_POINT ( 'NONE', ( 7.915842926500919100, -100.0000000000000300, -2.818161743892674500 ) ) ; +#12759 = CARTESIAN_POINT ( 'NONE', ( 30.97252574479752200, -99.99999999999998600, 20.97559654704422600 ) ) ; +#12760 = CARTESIAN_POINT ( 'NONE', ( 1.035533905932738000, 12.00000000000000000, -22.79289321881344700 ) ) ; +#12761 = ORIENTED_EDGE ( 'NONE', *, *, #2725, .F. ) ; +#12762 = DIRECTION ( 'NONE', ( -0.5022820777495872200, 0.0000000000000000000, 0.8647038304365012300 ) ) ; +#12763 = CARTESIAN_POINT ( 'NONE', ( 20.05176304453790000, -27.98912809145724600, 27.51078968953485700 ) ) ; +#12764 = CARTESIAN_POINT ( 'NONE', ( 6.454772689667761300, -28.99145422710496000, 22.80624300973823200 ) ) ; +#12765 = CARTESIAN_POINT ( 'NONE', ( 11.13381355959600000, -30.74437572666942500, 26.96408783820156800 ) ) ; +#12766 = ORIENTED_EDGE ( 'NONE', *, *, #12791, .F. ) ; +#12767 = CARTESIAN_POINT ( 'NONE', ( 2.501097020554921400, -9.240536455385907300, -23.55289141356945500 ) ) ; +#12768 = CARTESIAN_POINT ( 'NONE', ( 39.27167549262669200, -8.291428129309995400, -24.96964818557421100 ) ) ; +#12769 = CARTESIAN_POINT ( 'NONE', ( 32.86972049548968800, -30.72120399204276700, 27.40046718151291600 ) ) ; +#12770 = CARTESIAN_POINT ( 'NONE', ( 4.552981303232502200, -12.39423073930273300, -22.54665123933150300 ) ) ; +#12771 = CARTESIAN_POINT ( 'NONE', ( 43.96446609406726200, 11.99999999999999500, -22.79289321881344700 ) ) ; +#12772 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#12773 = CARTESIAN_POINT ( 'NONE', ( 13.25130122543296500, -30.72482069610125100, 27.79634534684332100 ) ) ; +#12774 = CARTESIAN_POINT ( 'NONE', ( 9.462834253095779900, -31.01625039380776300, 25.88005564997172000 ) ) ; +#12775 = CARTESIAN_POINT ( 'NONE', ( 29.54941352505466100, -30.77347774677275200, 28.36758194924233900 ) ) ; +#12776 = DIRECTION ( 'NONE', ( 0.5022676430279096000, 0.0000000000000000000, 0.8647122149982550100 ) ) ; +#12777 = CARTESIAN_POINT ( 'NONE', ( 6.164334257086025600, -8.539175774839527800, -24.91063336516139900 ) ) ; +#12778 = ORIENTED_EDGE ( 'NONE', *, *, #1297, .F. ) ; +#12779 = DIRECTION ( 'NONE', ( 0.3446557976509105300, 0.9387291308708890500, 0.0000000000000000000 ) ) ; +#12780 = CARTESIAN_POINT ( 'NONE', ( 38.00400465233308700, -29.76439926329646500, 24.28616043986993800 ) ) ; +#12781 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12782 = CARTESIAN_POINT ( 'NONE', ( 34.65212778377777200, -30.68364631980786700, 26.59074226172654300 ) ) ; +#12783 = CARTESIAN_POINT ( 'NONE', ( 32.41079701393312000, -30.57982268950891200, 27.58474623675198200 ) ) ; +#12784 = CARTESIAN_POINT ( 'NONE', ( 24.79012886709651300, -7.999433903641627100, 29.44235213665994200 ) ) ; +#12785 = EDGE_LOOP ( 'NONE', ( #9196, #9351, #9367, #9521 ) ) ; +#12786 = CARTESIAN_POINT ( 'NONE', ( 7.615180162313756700, -30.65209421694528300, 24.71839588801793000 ) ) ; +#12787 = CARTESIAN_POINT ( 'NONE', ( 37.49999998962729100, -95.07596123493894400, 12.92969265702213700 ) ) ; +#12788 = FACE_OUTER_BOUND ( 'NONE', #12300, .T. ) ; +#12789 = CARTESIAN_POINT ( 'NONE', ( 34.96139924881424600, -89.42430879162672900, 7.195777944472398600 ) ) ; +#12790 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122091300, -0.1736481776669239500 ) ) ; +#12791 = EDGE_CURVE ( 'NONE', #1692, #10757, #6835, .T. ) ; +#12792 = LINE ( 'NONE', #8758, #7808 ) ; +#12793 = CARTESIAN_POINT ( 'NONE', ( 39.74366862050499800, -29.57833912737895300, 22.19428039430879100 ) ) ; +#12794 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #5532, #11288, ( #10149 ) ) ; +#12795 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#12796 = CARTESIAN_POINT ( 'NONE', ( 7.915842926500919100, -12.49999999999999600, 12.61044906809743300 ) ) ; +#12797 = CARTESIAN_POINT ( 'NONE', ( 36.40374862002494900, -30.73466768034176200, 25.45333616166759000 ) ) ; +#12798 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -5.000000000000000900, 22.50000000000000400 ) ) ; +#12799 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#12800 = CARTESIAN_POINT ( 'NONE', ( 44.27823986934846100, -7.652474478736558600, 17.05977880231741400 ) ) ; +#12801 = CARTESIAN_POINT ( 'NONE', ( 6.351775608614009800, -94.71789415300563100, 14.39284042840214200 ) ) ; +#12802 = LINE ( 'NONE', #535, #12517 ) ; +#12803 = CARTESIAN_POINT ( 'NONE', ( 5.989301749442101500, -30.19302375027260500, 23.11864727200750400 ) ) ; +#12804 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000700, -8.817962946547220700, 8.134597997238580900 ) ) ; +#12805 = VERTEX_POINT ( 'NONE', #437 ) ; +#12806 = CARTESIAN_POINT ( 'NONE', ( 32.62998727129074400, -23.70735070230253400, -25.30892793246924200 ) ) ; +#12807 = CARTESIAN_POINT ( 'NONE', ( 11.15290993523273900, -30.29347135217878100, 27.00146057659068400 ) ) ; +#12808 = EDGE_CURVE ( 'NONE', #9992, #2052, #11125, .T. ) ; +#12809 = CARTESIAN_POINT ( 'NONE', ( 39.58663038965686800, -24.62457167050489600, 10.82093184136915900 ) ) ; +#12810 = CARTESIAN_POINT ( 'NONE', ( 38.81420026212632700, -9.966251265736193700, -24.70851014438254000 ) ) ; +#12811 = CARTESIAN_POINT ( 'NONE', ( 32.86139111391973700, -30.98109455097079800, 27.33257066369650400 ) ) ; +#12812 = CARTESIAN_POINT ( 'NONE', ( 42.49999999999999300, 9.500000000000000000, 22.50000000000000700 ) ) ; +#12813 = CARTESIAN_POINT ( 'NONE', ( 6.071532165918824800E-015, -5.000000000000023100, 16.06938735382970800 ) ) ; +#12814 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000900, 17.50000000000000400 ) ) ; +#12815 = CARTESIAN_POINT ( 'NONE', ( 13.35515228488136200, -30.81741806619735500, 27.81486867635089800 ) ) ; +#12816 = CARTESIAN_POINT ( 'NONE', ( 9.399003240448092100, -30.27044225994120900, 26.11111310639298800 ) ) ; +#12817 = DIRECTION ( 'NONE', ( -0.9255621191893611500, -0.3785957785312703500, 0.0000000000000000000 ) ) ; +#12818 = CARTESIAN_POINT ( 'NONE', ( 37.87993236886254100, -30.77111866786887600, 23.99893484121802000 ) ) ; +#12819 = AXIS2_PLACEMENT_3D ( 'NONE', #1848, #8983, #2859 ) ; +#12820 = CARTESIAN_POINT ( 'NONE', ( 25.90124972321251600, -23.61814775397471400, -27.40124687630006100 ) ) ; +#12821 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #844, #6152, #8237, #2116 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.8944262939597809000 ), + .UNSPECIFIED. ) ; +#12822 = EDGE_CURVE ( 'NONE', #8914, #3580, #5702, .T. ) ; +#12823 = CARTESIAN_POINT ( 'NONE', ( 34.40831775374759600, -30.06922806809174300, 26.70343151915013600 ) ) ; +#12824 = CARTESIAN_POINT ( 'NONE', ( 34.32400312550426900, -30.09267108278716000, 26.75596520571659600 ) ) ; +#12825 = LINE ( 'NONE', #3057, #2710 ) ; +#12826 = CARTESIAN_POINT ( 'NONE', ( 39.89833248856185600, -29.97926689933351300, 21.56203621553614300 ) ) ; +#12827 = EDGE_LOOP ( 'NONE', ( #11442, #11990, #7909, #446 ) ) ; +#12828 = CARTESIAN_POINT ( 'NONE', ( 7.710047306250718400, -29.66428111279786600, 24.79267412778357400 ) ) ; +#12829 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#12830 = CARTESIAN_POINT ( 'NONE', ( 6.176724239840963200, -30.66059900308779300, 21.91634668835377700 ) ) ; +#12831 = CARTESIAN_POINT ( 'NONE', ( 30.21615737980298600, -95.07596123493894400, 15.30026349259854600 ) ) ; +#12832 = CARTESIAN_POINT ( 'NONE', ( -3.183143051759783000, -10.74770996088317300, 18.11134077736016200 ) ) ; +#12833 = LINE ( 'NONE', #11589, #2718 ) ; +#12834 = CARTESIAN_POINT ( 'NONE', ( 38.86353713698790800, -30.64966964453570600, 22.01918801583599400 ) ) ; +#12835 = CARTESIAN_POINT ( 'NONE', ( 8.150693702021856200, -100.0000000000000300, -2.025726487526200400 ) ) ; +#12836 = CARTESIAN_POINT ( 'NONE', ( 36.17561687144451800, -29.60661526558810800, 25.52431817673619100 ) ) ; +#12837 = CARTESIAN_POINT ( 'NONE', ( 30.73262252960160300, -30.89372926213154000, 28.07202507825300200 ) ) ; +#12838 = CARTESIAN_POINT ( 'NONE', ( 25.39365531478670200, -20.86845525358461400, -26.92140799238292100 ) ) ; +#12839 = EDGE_CURVE ( 'NONE', #4031, #2194, #1689, .T. ) ; +#12840 = CARTESIAN_POINT ( 'NONE', ( 44.89950488392418700, -6.238177631573537800, 16.16833093229115500 ) ) ; +#12841 = CARTESIAN_POINT ( 'NONE', ( 12.33538498299120100, -95.07596123493894400, 15.52558084895266100 ) ) ; +#12842 = CARTESIAN_POINT ( 'NONE', ( 6.608904114901120500, -29.08885266084441300, 23.17926408350472300 ) ) ; +#12843 = CARTESIAN_POINT ( 'NONE', ( 7.687203338104144000, -21.71821144627876500, 16.41217989472055200 ) ) ; +#12844 = CARTESIAN_POINT ( 'NONE', ( 39.53560532740234400, -22.77318011328235800, -15.90602380425273800 ) ) ; +#12845 = CARTESIAN_POINT ( 'NONE', ( 11.24259053495465500, -30.92566778217203400, 26.95573034023118800 ) ) ; +#12846 = DIRECTION ( 'NONE', ( -0.2403982332053359300, 0.0000000000000000000, 0.9706743477973202000 ) ) ; +#12847 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #217, #8346, #10369, #4247, #11392, #5270, #12366, #6313, #258, #7366, #1263, #8392, #2265, #9409, #3283, #10414, #4290, #11437, #5320, #12407, #6356, #307, #7412, #1307, #8444 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 1, 2, 2, 4 ), + ( 0.0000000000000000000, 0.1250000000000004200, 0.1875000000000006100, 0.2500000000000008300, 0.3750000000000010000, 0.4375000000000010000, 0.5000000000000010000, 0.6250000000000008900, 0.6875000000000007800, 0.7500000000000005600, 0.8125000000000004400, 0.8750000000000003300, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#12848 = CARTESIAN_POINT ( 'NONE', ( 40.23203996660655700, -9.920415621998101200, -24.08206189593665800 ) ) ; +#12849 = CARTESIAN_POINT ( 'NONE', ( 32.66636934279542700, -30.67444368453068600, 27.48472338526007500 ) ) ; +#12850 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669239800, 0.9848077530122092400 ) ) ; +#12851 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, 10.96446609406726200, -23.00000000000000000 ) ) ; +#12852 = CARTESIAN_POINT ( 'NONE', ( 42.99999999999999300, 10.96446609406726200, -25.00000000000000000 ) ) ; +#12853 = CARTESIAN_POINT ( 'NONE', ( 13.35428158143855600, -30.75494155835963300, 27.82493421999984000 ) ) ; +#12854 = CARTESIAN_POINT ( 'NONE', ( 9.596091556444381600, -31.16243777075729300, 25.84759395785876600 ) ) ; +#12855 = VECTOR ( 'NONE', #2471, 1000.000000000000000 ) ; +#12856 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000005300, -12.49999999999998400, -10.20941827348498200 ) ) ; +#12857 = CARTESIAN_POINT ( 'NONE', ( 8.141259305317625200, -21.42462505051026500, 17.12060295522010000 ) ) ; +#12858 = CARTESIAN_POINT ( 'NONE', ( 34.96242584221889200, -100.0000000000000100, 1.600059941120307600 ) ) ; +#12859 = EDGE_CURVE ( 'NONE', #8780, #12504, #12487, .T. ) ; +#12860 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -8.823239597174007200, -12.28513399653360400 ) ) ; +#12861 = CARTESIAN_POINT ( 'NONE', ( 37.61673310363354300, -29.38654006803217200, 24.30431559963900100 ) ) ; +#12862 = CARTESIAN_POINT ( 'NONE', ( 27.28557503422740300, -19.12086458241941900, -26.60825451326872600 ) ) ; +#12863 = EDGE_CURVE ( 'NONE', #8256, #11902, #8455, .T. ) ; +#12864 = AXIS2_PLACEMENT_3D ( 'NONE', #6367, #8172, #8887 ) ; +#12865 = CARTESIAN_POINT ( 'NONE', ( 34.45754450904366500, -30.56560142703594400, 26.71327109869367400 ) ) ; +#12866 = CARTESIAN_POINT ( 'NONE', ( 36.63502966491985500, -29.45883156216979200, 25.12644353745620800 ) ) ; +#12867 = VECTOR ( 'NONE', #5887, 1000.000000000000000 ) ; +#12868 = CARTESIAN_POINT ( 'NONE', ( 43.00000000000000000, 9.500000000000000000, -24.99999999999999600 ) ) ; +#12869 = CARTESIAN_POINT ( 'NONE', ( 7.960623322978411100, -31.00434681908113900, 24.61147711743811300 ) ) ; +#12870 = CARTESIAN_POINT ( 'NONE', ( 19.69957902172643600, -23.32210704088526400, -27.34904691119419000 ) ) ; +#12871 = CARTESIAN_POINT ( 'NONE', ( 7.612040541026365400, -31.07259014498793400, 24.05270524960167600 ) ) ; +#12872 = CARTESIAN_POINT ( 'NONE', ( 42.99677695196016500, 9.827245291872296600, -24.98388475980063100 ) ) ; +#12873 = CARTESIAN_POINT ( 'NONE', ( 39.13531176349184900, -29.23724498960942600, 22.57097621643458800 ) ) ; +#12874 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999997300, -97.57596123493894400, 0.8682408883346195400 ) ) ; +#12875 = CARTESIAN_POINT ( 'NONE', ( 8.150693702021856200, -12.49999999999999600, 13.40288432446390700 ) ) ; +#12876 = CIRCLE ( 'NONE', #9280, 3.189999999999995100 ) ; +#12877 = CARTESIAN_POINT ( 'NONE', ( 36.34874552140014700, -30.48739376737664100, 25.60870864068815000 ) ) ; +#12878 = CARTESIAN_POINT ( 'NONE', ( 5.521806958164942700, -7.865342589938496300, 25.00000000000000000 ) ) ; +#12879 = CARTESIAN_POINT ( 'NONE', ( 27.83164948499221600, -18.04916640638549900, -27.93856563974642500 ) ) ; +#12880 = EDGE_CURVE ( 'NONE', #752, #11849, #645, .T. ) ; +#12881 = CARTESIAN_POINT ( 'NONE', ( 17.65865179849628300, -95.07596123493894400, 17.80158384680337500 ) ) ; +#12882 = CARTESIAN_POINT ( 'NONE', ( 6.429396010923460900, -30.60994407254625600, 23.21485939476990300 ) ) ; +#12883 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12884 = CARTESIAN_POINT ( 'NONE', ( 3.949813413549676100, -17.89962682709924400, -11.53187062879840700 ) ) ; +#12885 = CARTESIAN_POINT ( 'NONE', ( 11.23580689667881500, -30.49923373439583000, 27.04602584847750500 ) ) ; +#12886 = CARTESIAN_POINT ( 'NONE', ( 9.549954169407225600, -19.37711633820934400, 19.04237171926815000 ) ) ; +#12887 = CARTESIAN_POINT ( 'NONE', ( 41.85460162889347700, -9.304625296577080800, -24.07621762923917400 ) ) ; +#12888 = CARTESIAN_POINT ( 'NONE', ( 32.66376122664369300, -30.91210888047542200, 27.43457093960904600 ) ) ; +#12889 = ORIENTED_EDGE ( 'NONE', *, *, #10664, .F. ) ; +#12890 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.734723475976807300E-016 ) ) ; +#12891 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999998200, -95.19591800741319800, 10.91472003790720400 ) ) ; +#12892 = CARTESIAN_POINT ( 'NONE', ( 13.56012290653848500, -30.83521972568813000, 27.87528730071364800 ) ) ; +#12893 = EDGE_CURVE ( 'NONE', #10045, #6834, #345, .T. ) ; +#12894 = CARTESIAN_POINT ( 'NONE', ( 9.477043126354596200, -30.48253377857017900, 26.15551096411941900 ) ) ; +#12895 = CARTESIAN_POINT ( 'NONE', ( 7.974808194957759600, -94.72210163403924800, 15.44587895064602500 ) ) ; +#12896 = ORIENTED_EDGE ( 'NONE', *, *, #4459, .T. ) ; +#12897 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -99.99999999999998600, 6.630571736238761300 ) ) ; +#12898 = CARTESIAN_POINT ( 'NONE', ( 5.101645726998412100, -29.97917159722628400, 21.56166213730497800 ) ) ; +#12899 = CARTESIAN_POINT ( 'NONE', ( 37.91729173581318000, -30.42143641670569600, 24.40102673349073800 ) ) ; +#12900 = ORIENTED_EDGE ( 'NONE', *, *, #7545, .F. ) ; +#12901 = CARTESIAN_POINT ( 'NONE', ( 32.84740626532838100, -18.13933310480712500, -26.43518403135132300 ) ) ; +#12902 = CARTESIAN_POINT ( 'NONE', ( 34.41068266319594900, -31.10292153827930800, 26.52584806851180600 ) ) ; +#12903 = CARTESIAN_POINT ( 'NONE', ( 37.85814370192888800, -29.15166244397998000, 23.82145975707428300 ) ) ; +#12904 = ORIENTED_EDGE ( 'NONE', *, *, #11838, .F. ) ; +#12905 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12906 = CARTESIAN_POINT ( 'NONE', ( 7.742131396376421100, -30.10720557398743900, 25.01028021708762200 ) ) ; +#12907 = CARTESIAN_POINT ( 'NONE', ( 12.94195295064603000, -21.53251527116674400, -25.54623170557678700 ) ) ; +#12908 = CARTESIAN_POINT ( 'NONE', ( 9.861105075081948000, -31.15644972032457000, 26.03875528662876700 ) ) ; +#12909 = CARTESIAN_POINT ( 'NONE', ( 44.32205529745612400, 11.35811734783833200, -24.32205529745620600 ) ) ; +#12910 = EDGE_CURVE ( 'NONE', #12805, #9498, #10798, .T. ) ; +#12911 = CARTESIAN_POINT ( 'NONE', ( 39.13538832055266400, -30.48384809508533200, 22.34790658922020200 ) ) ; +#12912 = CARTESIAN_POINT ( 'NONE', ( 38.03895777287637300, -31.05128226365702900, 22.23621568674898800 ) ) ; +#12913 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12914 = ORIENTED_EDGE ( 'NONE', *, *, #10796, .T. ) ; +#12915 = CARTESIAN_POINT ( 'NONE', ( 36.16721254630969200, -31.16589495903855700, 25.23764602426795300 ) ) ; +#12916 = CARTESIAN_POINT ( 'NONE', ( 8.592573028501172800, -11.40800804244994300, 24.02787184853080400 ) ) ; +#12917 = CARTESIAN_POINT ( 'NONE', ( 30.95340743425046200, -23.79285447913685700, -26.19316882047184300 ) ) ; +#12918 = ORIENTED_EDGE ( 'NONE', *, *, #8408, .T. ) ; +#12919 = CARTESIAN_POINT ( 'NONE', ( 32.09863200989554600, -9.562556682370415100, -24.99999999999999600 ) ) ; +#12920 = CARTESIAN_POINT ( 'NONE', ( 6.429362347364175900, -29.41450490648911400, 23.42411124083635300 ) ) ; +#12921 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12922 = CARTESIAN_POINT ( 'NONE', ( 11.44986736665557100, -31.03691747007489400, 27.00489530840969700 ) ) ; +#12923 = CARTESIAN_POINT ( 'NONE', ( 7.545683974031471000, -19.51610006880623500, 16.57966254220771400 ) ) ; +#12924 = CARTESIAN_POINT ( 'NONE', ( 36.85887340129696800, -21.42469525522228600, 17.12041732863333700 ) ) ; +#12925 = ORIENTED_EDGE ( 'NONE', *, *, #8638, .F. ) ; +#12927 = EDGE_CURVE ( 'NONE', #4698, #9374, #2672, .T. ) ; +#12926 = CARTESIAN_POINT ( 'NONE', ( 41.15537051365257100, -11.23571604708993700, -22.46755997374652500 ) ) ; +#12928 = CARTESIAN_POINT ( 'NONE', ( 32.25936292949580100, -30.65086950430481100, 27.63472431499272000 ) ) ; +#12929 = APPROVAL_DATE_TIME ( #2502, #1045 ) ; +#12930 = CARTESIAN_POINT ( 'NONE', ( 7.377113684011967500, -95.07596123493893000, 10.90036813677270500 ) ) ; +#12931 = CARTESIAN_POINT ( 'NONE', ( 13.56034751430264000, -30.80425983092486000, 27.88085765513260500 ) ) ; +#12932 = CARTESIAN_POINT ( 'NONE', ( 9.596399165726945000, -29.79489959174762200, 26.08824971084091300 ) ) ; +#12933 = CARTESIAN_POINT ( 'NONE', ( 24.95222401166332200, -25.57120077518309400, 22.25479425193669400 ) ) ; +#12934 = CARTESIAN_POINT ( 'NONE', ( 5.859155854342445100, -28.94795825350041700, 21.74349301863665200 ) ) ; +#12935 = CARTESIAN_POINT ( 'NONE', ( 37.38862431534967400, -29.26791715865566700, 24.37199291407530700 ) ) ; +#12936 = ORIENTED_EDGE ( 'NONE', *, *, #9028, .F. ) ; +#12937 = CARTESIAN_POINT ( 'NONE', ( 37.65056579573374100, -18.89978689302338900, -21.27298815488643400 ) ) ; +#12938 = CARTESIAN_POINT ( 'NONE', ( 34.15594333879393900, -30.43811895531575100, 26.86633853556590200 ) ) ; +#12939 = CARTESIAN_POINT ( 'NONE', ( 38.63532478851636400, -28.97044949172199700, 22.63239721572911700 ) ) ; +#12940 = ORIENTED_EDGE ( 'NONE', *, *, #5879, .T. ) ; +#12941 = CARTESIAN_POINT ( 'NONE', ( 0.1956231000003047200, 10.60749141855853700, -24.80437689999975600 ) ) ; +#12942 = CARTESIAN_POINT ( 'NONE', ( 8.347776121499427000, -31.14499631093488600, 24.80591495486442700 ) ) ; +#12943 = CARTESIAN_POINT ( 'NONE', ( 12.15449410749127200, -18.14063299981630100, -26.43541323791343000 ) ) ; +#12944 = CARTESIAN_POINT ( 'NONE', ( 12.33821198787969700, -30.96217208529819900, 27.41921016152166100 ) ) ; +#12945 = CARTESIAN_POINT ( 'NONE', ( 9.009988246082512500, -18.74964644093782300, -23.30727672953220200 ) ) ; +#12946 = CARTESIAN_POINT ( 'NONE', ( 44.02497442609492100, 11.48776909978535500, -22.80499488521890700 ) ) ; +#12947 = EDGE_CURVE ( 'NONE', #8284, #5786, #10495, .T. ) ; +#12948 = CARTESIAN_POINT ( 'NONE', ( 38.61862551381266000, -29.03041361326673500, 22.80352459549807900 ) ) ; +#12949 = FACE_OUTER_BOUND ( 'NONE', #5334, .T. ) ; +#12950 = CARTESIAN_POINT ( 'NONE', ( 18.87270207479720300, -23.54579867975647600, -27.35380234363643500 ) ) ; +#12951 = CARTESIAN_POINT ( 'NONE', ( 43.40000000000000600, 8.200000000000013500, 0.0000000000000000000 ) ) ; +#12952 = CARTESIAN_POINT ( 'NONE', ( 36.16217366998410700, -30.30656797020583000, 25.75917822560464600 ) ) ; +#12953 = CARTESIAN_POINT ( 'NONE', ( 10.71482306616151300, -11.64572200901974100, 25.00000000000000400 ) ) ; +#12954 = CARTESIAN_POINT ( 'NONE', ( 34.96949806344545000, -20.64325189861632700, -23.04477536673202200 ) ) ; +#12955 = CARTESIAN_POINT ( 'NONE', ( 5.963637971137258900, -95.57679032034013700, 12.92966369182017200 ) ) ; +#12956 = CARTESIAN_POINT ( 'NONE', ( 6.709046784259800900, -7.538449311261610200, -28.27874517589434700 ) ) ; +#12957 = CARTESIAN_POINT ( 'NONE', ( 6.924619781394844700, -30.90937042186489600, 23.32850184684673400 ) ) ; +#12958 = CARTESIAN_POINT ( 'NONE', ( 6.712006322907203800, -7.463541018600208700, -24.99999999999999600 ) ) ; +#12959 = CARTESIAN_POINT ( 'NONE', ( 8.101698549258406600, -99.99999999999998600, 18.90271971053048700 ) ) ; +#12960 = CARTESIAN_POINT ( 'NONE', ( 11.42989987946287700, -30.65054479298699200, 27.11863040008938300 ) ) ; +#12961 = EDGE_CURVE ( 'NONE', #11764, #3100, #10169, .T. ) ; +#12962 = LINE ( 'NONE', #4565, #4925 ) ; +#12963 = ADVANCED_FACE ( 'NONE', ( #7805 ), #2737, .F. ) ; +#12964 = CARTESIAN_POINT ( 'NONE', ( 6.144425812542271700, -19.66737334927379200, 13.89920606219500600 ) ) ; +#12965 = CARTESIAN_POINT ( 'NONE', ( 32.32302691359534200, -9.562556673471858600, -25.00000000000000000 ) ) ; +#12966 = VERTEX_POINT ( 'NONE', #11892 ) ; +#12967 = CARTESIAN_POINT ( 'NONE', ( 32.25975379292030700, -30.81929692483526400, 27.60894446361485800 ) ) ; +#12968 = CARTESIAN_POINT ( 'NONE', ( 10.07230913370126800, -37.34576757614821900, 16.37701796840343600 ) ) ; +#12969 = CARTESIAN_POINT ( 'NONE', ( 3.949813413549676100, -17.89962682709924400, -11.53187062879840700 ) ) ; +#12970 = CARTESIAN_POINT ( 'NONE', ( 8.422237887215139600, -100.0000000000000300, -1.248825278329980900 ) ) ; +#12971 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#12972 = CARTESIAN_POINT ( 'NONE', ( 13.66273929060230500, -30.83544489898736900, 27.90619495617291800 ) ) ; +#12973 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #10176, #2201, #1287 ), + ( #8427, #2285, #9433 ), + ( #3313, #10442, #4315 ), + ( #11466, #5351, #12433 ), + ( #6387, #339, #7441 ), + ( #1332, #8472, #2334 ), + ( #9475, #3352, #10488 ), + ( #4356, #11505, #5399 ), + ( #12477, #6431, #383 ), + ( #7488, #1376, #8512 ), + ( #2373, #9518, #3391 ), + ( #10529, #4404, #11547 ), + ( #5441, #12516, #6476 ), + ( #421, #7528, #1423 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.003585109863186481400, 0.005377664794779722000, 0.007170219726372962900, 0.01075532958955944400, 0.01254788452115268600, 0.01434043945274592600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7941268098083124100, 1.000000000000000000), + ( 1.000000000000000000, 0.7940570593829826600, 1.000000000000000000), + ( 1.000000000000000000, 0.7939519617336862100, 1.000000000000000000), + ( 1.000000000000000000, 0.7936175834392590300, 1.000000000000000000), + ( 1.000000000000000000, 0.7934813839845064100, 1.000000000000000000), + ( 1.000000000000000000, 0.7931618300848651800, 1.000000000000000000), + ( 1.000000000000000000, 0.7929793145172713300, 1.000000000000000000), + ( 1.000000000000000000, 0.7922959124031558900, 1.000000000000000000), + ( 1.000000000000000000, 0.7917664014436274200, 1.000000000000000000), + ( 1.000000000000000000, 0.7905104243219632800, 1.000000000000000000), + ( 1.000000000000000000, 0.7899879287584583600, 1.000000000000000000), + ( 1.000000000000000000, 0.7886047795569605100, 1.000000000000000000), + ( 1.000000000000000000, 0.7877139102625082500, 1.000000000000000000), + ( 1.000000000000000000, 0.7865485489145646000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#12974 = CARTESIAN_POINT ( 'NONE', ( 38.94931178141290900, -28.87043262030352200, 21.75755471859917000 ) ) ; +#12975 = CARTESIAN_POINT ( 'NONE', ( 9.768175421814479600, -30.67033111124490600, 26.27916550926643100 ) ) ; +#12976 = CARTESIAN_POINT ( 'NONE', ( 11.50518779752778700, -16.51637930240192600, -25.15003134639891900 ) ) ; +#12977 = CARTESIAN_POINT ( 'NONE', ( 41.59789103769074400, -11.10137350904080700, -21.88297530704790700 ) ) ; +#12978 = CARTESIAN_POINT ( 'NONE', ( 33.23703696044231000, -94.73589744036138400, 17.26429150633460500 ) ) ; +#12979 = CARTESIAN_POINT ( 'NONE', ( 5.624695902882673500, -30.37634295595022500, 21.55977604609067900 ) ) ; +#12980 = CARTESIAN_POINT ( 'NONE', ( 37.79760882972645000, -30.19399417679952400, 24.60466577566649700 ) ) ; +#12981 = CARTESIAN_POINT ( 'NONE', ( 32.49024057317928500, -9.898055031220110300, -24.98202435145661900 ) ) ; +#12982 = EDGE_CURVE ( 'NONE', #12805, #494, #7827, .T. ) ; +#12983 = CYLINDRICAL_SURFACE ( 'NONE', #3384, 2.499999999999998700 ) ; +#12984 = CARTESIAN_POINT ( 'NONE', ( 34.14613794154189500, -30.93676998646702000, 26.75770776637499900 ) ) ; +#12985 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -5.000000000000000900, -24.99999999999999600 ) ) ; +#12986 = CARTESIAN_POINT ( 'NONE', ( 8.092616359177270600, -30.39211412692654000, 25.24760860961964000 ) ) ; +#12987 = CARTESIAN_POINT ( 'NONE', ( 15.03979953815169600, -13.79315465228749600, -25.66883550719809300 ) ) ; +#12988 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -5.000000000000000900, 25.00000000000000000 ) ) ; +#12989 = CARTESIAN_POINT ( 'NONE', ( 42.49999999999999300, 12.00000000000000000, -22.50000000000000000 ) ) ; +#12990 = CARTESIAN_POINT ( 'NONE', ( 39.36616259117044300, -30.12294830626799700, 22.64753837348661100 ) ) ; +#12991 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -5.000000000000000900, 22.50000000000000400 ) ) ; +#12992 = CARTESIAN_POINT ( 'NONE', ( 36.02255840615630000, -31.11911529716990500, 25.41530730870234600 ) ) ; +#12993 = EDGE_CURVE ( 'NONE', #10448, #1574, #5387, .T. ) ; +#12994 = CARTESIAN_POINT ( 'NONE', ( 2.951129243265880700, -10.87467114549051500, -21.33212904862400400 ) ) ; +#12995 = CARTESIAN_POINT ( 'NONE', ( 37.28217429153568200, -18.00631047528503000, -22.35641832277429900 ) ) ; +#12996 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9338, #1200, #4045, #10179, #3048, #9165, #2033, #8152, #1027, #7123, #17, #6069, #12137, #5039, #11151, #4001, #10126, #3004, #9123, #1988, #8106, #987, #7078, #13048, #6025, #12096 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 9.126689985681991500E-017, 0.002463547768589956800, 0.003695321652884885600, 0.004927095537179813900, 0.007390643305769666200, 0.008622417190064592800, 0.009854191074359516800, 0.01231773884294936800, 0.01354951272724429600, 0.01478128661153922100, 0.01601306049583414700, 0.01724483438012907500, 0.01970838214871892600 ), + .UNSPECIFIED. ) ; +#12997 = EDGE_CURVE ( 'NONE', #1415, #7324, #5430, .T. ) ; +#12998 = CARTESIAN_POINT ( 'NONE', ( 37.62288631598855900, -95.07596123493894400, 10.90036813677207800 ) ) ; +#12999 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12213, #5114, #7203, #1104, #8231, #2111, #9246, #3118, #10251, #4130, #11275, #5153, #12257, #6195, #141, #7245, #1150, #8277, #2151, #9285 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001042485832280932400, 0.001563728748421398500, 0.002084971664561864900, 0.002345593122632099800, 0.002606214580702334700, 0.002866836038772569600, 0.003127457496842804500, 0.003648700412983274700, 0.004169943329123744500 ), + .UNSPECIFIED. ) ; +#13000 = CARTESIAN_POINT ( 'NONE', ( 15.88320558274201500, -7.690981902354824500, -32.52745544033999900 ) ) ; +#13001 = CARTESIAN_POINT ( 'NONE', ( 6.448905444289087200, -29.89823322919550800, 23.78042888396568300 ) ) ; +#13002 = CARTESIAN_POINT ( 'NONE', ( 6.716968851347690600, -7.728515261096957200, -24.99999999999998900 ) ) ; +#13003 = CARTESIAN_POINT ( 'NONE', ( 32.05502029565123900, -30.75776035788659600, 27.69146007803937700 ) ) ; +#13004 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 12.00000000000000000, 22.50000000000000700 ) ) ; +#13005 = CARTESIAN_POINT ( 'NONE', ( 11.45089786455310800, -30.29941511084473800, 27.13258834909966300 ) ) ; +#13006 = VECTOR ( 'NONE', #10836, 1000.000000000000000 ) ; +#13007 = CARTESIAN_POINT ( 'NONE', ( 5.245645233001455100, -19.84300420151766900, 10.78716835495162500 ) ) ; +#13008 = CARTESIAN_POINT ( 'NONE', ( 32.99831363991054200, -10.44628719046281700, -25.05139155655260600 ) ) ; +#13009 = CARTESIAN_POINT ( 'NONE', ( 32.05554374674696300, -30.66040240899013700, 27.70390332253332500 ) ) ; +#13010 = CARTESIAN_POINT ( 'NONE', ( 5.362695482381041300, -30.52213682570915400, 9.507176850547113000 ) ) ; +#13011 = CARTESIAN_POINT ( 'NONE', ( 5.229823965719197600, -9.996403763623725100, 26.08058500819023000 ) ) ; +#13012 = CARTESIAN_POINT ( 'NONE', ( 13.66314369694626200, -30.82029249086387400, 27.90898455358351900 ) ) ; +#13013 = CARTESIAN_POINT ( 'NONE', ( 9.834436916104524000, -29.98258790619627600, 26.29014848987284100 ) ) ; +#13014 = EDGE_LOOP ( 'NONE', ( #12621, #119, #156 ) ) ; +#13015 = AXIS2_PLACEMENT_3D ( 'NONE', #10694, #4575, #11720 ) ; +#13016 = CARTESIAN_POINT ( 'NONE', ( 5.177647449690363500, -29.20455397952039800, 16.68368505643540800 ) ) ; +#13017 = CARTESIAN_POINT ( 'NONE', ( 29.87835410373766000, -93.16611561821720500, 22.40314361311564200 ) ) ; +#13018 = CARTESIAN_POINT ( 'NONE', ( 5.318701188305233500, -29.25011570472938500, 21.75855865003222800 ) ) ; +#13019 = VECTOR ( 'NONE', #464, 1000.000000000000000 ) ; +#13020 = CARTESIAN_POINT ( 'NONE', ( 37.38956948555098600, -31.07050098604072700, 24.05508191774478600 ) ) ; +#13021 = EDGE_CURVE ( 'NONE', #9629, #1071, #3062, .T. ) ; +#13022 = CARTESIAN_POINT ( 'NONE', ( 34.03968751788731600, -30.24767455462244600, 26.90861598913032900 ) ) ; +#13023 = CARTESIAN_POINT ( 'NONE', ( 0.6496112253394157300, -9.999999999999998200, -16.66595109963399300 ) ) ; +#13024 = CARTESIAN_POINT ( 'NONE', ( 8.347151797151260800, -29.45747844079234300, 25.10425106385958900 ) ) ; +#13025 = CYLINDRICAL_SURFACE ( 'NONE', #10161, 2.500000000000002200 ) ; +#13026 = CARTESIAN_POINT ( 'NONE', ( 4.667901743407032500, -16.97096206549233000, -18.30062338647573800 ) ) ; +#13027 = CARTESIAN_POINT ( 'NONE', ( 0.5281359913712593300, -11.05596098929269800, -11.46691662911861400 ) ) ; +#13028 = CARTESIAN_POINT ( 'NONE', ( 24.89671534393030300, -30.66083845029185500, 28.85693673715476100 ) ) ; +#13029 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#13030 = CARTESIAN_POINT ( 'NONE', ( 38.32464384655784800, -29.04255491789147200, 23.17207436149722400 ) ) ; +#13031 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 9.500000000000000000, -24.99999999999999600 ) ) ; +#13032 = EDGE_CURVE ( 'NONE', #3287, #9498, #727, .T. ) ; +#13033 = CARTESIAN_POINT ( 'NONE', ( 36.02106518994176600, -30.00411163453625800, 25.80048320000879500 ) ) ; +#13034 = EDGE_CURVE ( 'NONE', #494, #9515, #2053, .T. ) ; +#13035 = CARTESIAN_POINT ( 'NONE', ( 38.98727400603515700, -22.94039657408464100, -17.55955604476991300 ) ) ; +#13036 = EDGE_CURVE ( 'NONE', #11256, #3113, #11556, .T. ) ; +#13037 = ORIENTED_EDGE ( 'NONE', *, *, #10574, .F. ) ; +#13038 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -96.63408478952938200, 6.393891568607895900 ) ) ; +#13039 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #12682, #11723, #2592 ), + ( #9734, #3615, #10742 ), + ( #4621, #11759, #5669 ), + ( #12721, #6708, #632 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( -1.864827736675067600E-017, 0.004071613820668836700 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7936328294987481400, 1.000000000000000000), + ( 1.000000000000000000, 0.7939219499256261500, 1.000000000000000000), + ( 1.000000000000000000, 0.7940534625034700900, 1.000000000000000000), + ( 1.000000000000000000, 0.7941272348423911200, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#13040 = CARTESIAN_POINT ( 'NONE', ( -1.063825062123056500, -7.859881674735606600, -12.99952066692848100 ) ) ; +#13041 = CARTESIAN_POINT ( 'NONE', ( 7.046902362643130900, -30.97020253306855500, 23.37075691670160500 ) ) ; +#13042 = CARTESIAN_POINT ( 'NONE', ( 5.447749055083765100, -28.76920678331423200, 19.52380713429330300 ) ) ; +#13043 = CARTESIAN_POINT ( 'NONE', ( 32.05543930676694900, -30.88381435399339400, 27.66593321872588300 ) ) ; +#13044 = CARTESIAN_POINT ( 'NONE', ( 6.256871313281404700, -99.99999999999997200, 17.91973306516004500 ) ) ; +#13045 = CARTESIAN_POINT ( 'NONE', ( 11.52950339113418800, -30.74635143044892500, 27.14463520569658100 ) ) ; +#13046 = ORIENTED_EDGE ( 'NONE', *, *, #3987, .F. ) ; +#13047 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999994700, -19.96213073790379200, 8.676342277284458500 ) ) ; +#13048 = CARTESIAN_POINT ( 'NONE', ( 7.579442108803640100, -12.50000000000000000, -11.86534207749678100 ) ) ; +#13049 = ORIENTED_EDGE ( 'NONE', *, *, #7870, .F. ) ; +#13050 = CARTESIAN_POINT ( 'NONE', ( 33.90450077025302300, -10.78814545452072700, -24.99999999999338100 ) ) ; +#13051 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, 9.500000000000000000, -23.00000000000000000 ) ) ; +#13052 = CARTESIAN_POINT ( 'NONE', ( 8.766058495799809300, -100.0000000000000300, -0.5025220806101644600 ) ) ; +#13053 = ORIENTED_EDGE ( 'NONE', *, *, #9700, .T. ) ; +#13054 = CARTESIAN_POINT ( 'NONE', ( 13.66271942411218300, -30.80699928182605200, 27.91120489809286200 ) ) ; +#13055 = EDGE_CURVE ( 'NONE', #7276, #7774, #2362, .T. ) ; +#13056 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#13057 = CARTESIAN_POINT ( 'NONE', ( 9.994460616966677000, -30.94093677833093600, 26.27940670040611700 ) ) ; +#13058 = CARTESIAN_POINT ( 'NONE', ( 3.276721011745474600, -9.693645654354504900, 22.49999999999997900 ) ) ; +#13059 = ORIENTED_EDGE ( 'NONE', *, *, #2043, .T. ) ; +#13060 = CARTESIAN_POINT ( 'NONE', ( 37.67892769574117300, -16.63521403719990100, -22.90944221821776900 ) ) ; +#13061 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -97.51638471114853200, 22.06850012136331400 ) ) ; +#13062 = EDGE_LOOP ( 'NONE', ( #766, #915, #10323, #1092 ) ) ; +#13063 = CARTESIAN_POINT ( 'NONE', ( 6.042064933171990200, -30.56853860028806800, 21.58814959682916200 ) ) ; +#13064 = CARTESIAN_POINT ( 'NONE', ( 37.41021121108944700, -29.96342146899817400, 24.86662332689971700 ) ) ; +#13065 = CARTESIAN_POINT ( 'NONE', ( 24.93866206969478600, -30.66176281334873700, 28.85677374700786400 ) ) ; +#13066 = ADVANCED_FACE ( 'NONE', ( #12788 ), #6070, .F. ) ; +#13067 = CARTESIAN_POINT ( 'NONE', ( 34.06264987252158200, -30.73571773908068000, 26.87190917105838000 ) ) ; +#13068 = CARTESIAN_POINT ( 'NONE', ( 30.94837602283013200, -28.67366662734996700, 28.34856840948812000 ) ) ; +#13069 = EDGE_LOOP ( 'NONE', ( #8216, #9775, #10090, #11372 ) ) ; +#13070 = CARTESIAN_POINT ( 'NONE', ( 8.311358939667838900, -30.65410270662470200, 25.29110732784031500 ) ) ; +#13071 = CARTESIAN_POINT ( 'NONE', ( 9.779930862889706600, -10.04153899806810000, 24.99267555388900400 ) ) ; +#13072 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -8.819740027342598800, 7.982479907492302300 ) ) ; +#13073 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000000000, -8.819374836104858100, -11.47762492959976800 ) ) ; +#13074 = CARTESIAN_POINT ( 'NONE', ( 40.44701869676741500, -12.39423073930286800, -22.54665123933158100 ) ) ; +#13075 = EDGE_CURVE ( 'NONE', #11056, #4071, #9204, .T. ) ; +#13076 = CARTESIAN_POINT ( 'NONE', ( 39.04262192882029600, -29.87574991753087900, 23.18122314439631600 ) ) ; +#13077 = CARTESIAN_POINT ( 'NONE', ( 4.661887846926405600, -17.95423836870627500, -16.74269298156393400 ) ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STEP/Long_Hammer_Slide_Pin.step b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Long_Hammer_Slide_Pin.step new file mode 100644 index 0000000..78e4f52 --- /dev/null +++ b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Long_Hammer_Slide_Pin.step @@ -0,0 +1,708 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Long_Hammer_Slide_Pin.STEP', + '2013-11-10T07:46:30', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#2 = ORIENTED_EDGE ( 'NONE', *, *, #475, .F. ) ; +#3 = ORIENTED_EDGE ( 'NONE', *, *, #579, .T. ) ; +#4 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6 = LOCAL_TIME ( 17, 46, 30.00000000000000000, #10 ) ; +#7 = FACE_OUTER_BOUND ( 'NONE', #235, .T. ) ; +#8 = VERTEX_POINT ( 'NONE', #387 ) ; +#9 = ADVANCED_FACE ( 'NONE', ( #175 ), #78, .T. ) ; +#10 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#11 = ORIENTED_EDGE ( 'NONE', *, *, #448, .T. ) ; +#12 = ORIENTED_EDGE ( 'NONE', *, *, #462, .T. ) ; +#13 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#14 = CARTESIAN_POINT ( 'NONE', ( -28.74999999999999600, 0.0000000000000000000, -3.750000000000000900 ) ) ; +#15 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#16 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #309, 'distance_accuracy_value', 'NONE'); +#17 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#18 = PERSON_AND_ORGANIZATION ( #481, #69 ) ; +#19 = ORIENTED_EDGE ( 'NONE', *, *, #451, .T. ) ; +#20 = ORIENTED_EDGE ( 'NONE', *, *, #544, .F. ) ; +#21 = ORIENTED_EDGE ( 'NONE', *, *, #399, .T. ) ; +#22 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 5.357829746269669600E-016, 3.750000000000000000 ) ) ; +#24 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#25 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#26 = APPROVAL_DATE_TIME ( #31, #162 ) ; +#27 = VERTEX_POINT ( 'NONE', #447 ) ; +#28 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#29 = ORIENTED_EDGE ( 'NONE', *, *, #198, .F. ) ; +#30 = CARTESIAN_POINT ( 'NONE', ( -28.75000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31 = DATE_AND_TIME ( #36, #42 ) ; +#32 = ORIENTED_EDGE ( 'NONE', *, *, #460, .T. ) ; +#33 = ORIENTED_EDGE ( 'NONE', *, *, #500, .T. ) ; +#34 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#35 = CARTESIAN_POINT ( 'NONE', ( 16.25000000000000000, 6.123233995736766300E-016, -5.000000000000000000 ) ) ; +#36 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#37 = FACE_OUTER_BOUND ( 'NONE', #648, .T. ) ; +#38 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39 = VERTEX_POINT ( 'NONE', #319 ) ; +#40 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#41 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#42 = LOCAL_TIME ( 17, 46, 30.00000000000000000, #51 ) ; +#43 = ORIENTED_EDGE ( 'NONE', *, *, #603, .T. ) ; +#44 = VERTEX_POINT ( 'NONE', #580 ) ; +#45 = ORIENTED_EDGE ( 'NONE', *, *, #91, .T. ) ; +#46 = ADVANCED_FACE ( 'NONE', ( #662 ), #519, .F. ) ; +#47 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48 = ADVANCED_FACE ( 'NONE', ( #71 ), #496, .F. ) ; +#49 = ORIENTED_EDGE ( 'NONE', *, *, #74, .T. ) ; +#50 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#51 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#52 = TOROIDAL_SURFACE ( 'NONE', #384, 3.750000000000000900, 1.250000000000000000 ) ; +#53 = EDGE_LOOP ( 'NONE', ( #90, #378, #357, #461 ) ) ; +#54 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#55 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56 = APPROVAL_PERSON_ORGANIZATION ( #61, #162, #282 ) ; +#57 = ORIENTED_EDGE ( 'NONE', *, *, #352, .F. ) ; +#58 = CARTESIAN_POINT ( 'NONE', ( -26.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147353500E-016, 1.000000000000000000 ) ) ; +#60 = EDGE_LOOP ( 'NONE', ( #195, #214 ) ) ; +#61 = PERSON_AND_ORGANIZATION ( #481, #69 ) ; +#62 = TOROIDAL_SURFACE ( 'NONE', #386, 3.750000000000006700, 1.250000000000000000 ) ; +#63 = CLOSED_SHELL ( 'NONE', ( #48, #572, #46, #622, #191, #299, #512, #104, #440, #184, #101, #364, #568, #237, #76, #79, #436, #629, #239, #372, #9, #520, #301, #143 ) ) ; +#64 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#65 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, 6.123233995736766300E-016, -5.000000000000000000 ) ) ; +#66 = PERSON_AND_ORGANIZATION ( #481, #69 ) ; +#67 = ORIENTED_EDGE ( 'NONE', *, *, #443, .T. ) ; +#68 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ; +#69 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#70 = FACE_OUTER_BOUND ( 'NONE', #145, .T. ) ; +#71 = FACE_OUTER_BOUND ( 'NONE', #484, .T. ) ; +#72 = CARTESIAN_POINT ( 'NONE', ( -31.25000000000000000, 4.592425496802574000E-016, 3.750000000000000000 ) ) ; +#73 = VERTEX_POINT ( 'NONE', #419 ) ; +#74 = EDGE_CURVE ( 'NONE', #391, #153, #633, .T. ) ; +#75 = ORIENTED_EDGE ( 'NONE', *, *, #488, .T. ) ; +#76 = ADVANCED_FACE ( 'NONE', ( #160 ), #269, .F. ) ; +#77 = CIRCLE ( 'NONE', #345, 3.750000000000000000 ) ; +#78 = TOROIDAL_SURFACE ( 'NONE', #432, 3.750000000000000000, 1.250000000000000000 ) ; +#79 = ADVANCED_FACE ( 'NONE', ( #472 ), #401, .T. ) ; +#80 = ORIENTED_EDGE ( 'NONE', *, *, #670, .T. ) ; +#81 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#82 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147352700E-016, 1.000000000000000000 ) ) ; +#83 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#84 = CARTESIAN_POINT ( 'NONE', ( -27.50000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#85 = VERTEX_POINT ( 'NONE', #400 ) ; +#86 = ORIENTED_EDGE ( 'NONE', *, *, #691, .F. ) ; +#87 = TOROIDAL_SURFACE ( 'NONE', #350, 3.750000000000000000, 1.250000000000000000 ) ; +#88 = ORIENTED_EDGE ( 'NONE', *, *, #475, .T. ) ; +#89 = VERTEX_POINT ( 'NONE', #395 ) ; +#90 = ORIENTED_EDGE ( 'NONE', *, *, #169, .F. ) ; +#91 = EDGE_CURVE ( 'NONE', #73, #507, #281, .T. ) ; +#92 = FACE_OUTER_BOUND ( 'NONE', #152, .T. ) ; +#93 = ORIENTED_EDGE ( 'NONE', *, *, #488, .F. ) ; +#94 = CARTESIAN_POINT ( 'NONE', ( -31.25000000000000000, 0.0000000000000000000, -3.750000000000000000 ) ) ; +#95 = EDGE_LOOP ( 'NONE', ( #112, #415, #506, #106 ) ) ; +#96 = VERTEX_POINT ( 'NONE', #435 ) ; +#97 = CARTESIAN_POINT ( 'NONE', ( -28.75000000000000400, 4.592425496802575000E-016, 3.750000000000000900 ) ) ; +#98 = CARTESIAN_POINT ( 'NONE', ( -27.50000000000000400, 0.0000000000000000000, -3.750000000000000000 ) ) ; +#99 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ; +#100 = LOCAL_TIME ( 17, 46, 30.00000000000000000, #679 ) ; +#101 = ADVANCED_FACE ( 'NONE', ( #147 ), #423, .T. ) ; +#102 = ORIENTED_EDGE ( 'NONE', *, *, #362, .T. ) ; +#103 = EDGE_LOOP ( 'NONE', ( #148, #3, #559, #348 ) ) ; +#104 = ADVANCED_FACE ( 'NONE', ( #612 ), #305, .T. ) ; +#105 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 0.0000000000000000000, -2.500000000000006700 ) ) ; +#106 = ORIENTED_EDGE ( 'NONE', *, *, #508, .F. ) ; +#107 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#108 = ORIENTED_EDGE ( 'NONE', *, *, #492, .F. ) ; +#109 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#110 = CARTESIAN_POINT ( 'NONE', ( -30.00000000000000000, 0.0000000000000000000, -3.750000000000000000 ) ) ; +#111 = SHAPE_DEFINITION_REPRESENTATION ( #588, #258 ) ; +#112 = ORIENTED_EDGE ( 'NONE', *, *, #500, .F. ) ; +#113 = EDGE_LOOP ( 'NONE', ( #649, #555 ) ) ; +#114 = CYLINDRICAL_SURFACE ( 'NONE', #375, 5.000000000000000000 ) ; +#115 = ORIENTED_EDGE ( 'NONE', *, *, #687, .F. ) ; +#116 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#117 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #263 ) ) ; +#118 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#119 = CC_DESIGN_SECURITY_CLASSIFICATION ( #133, ( #149 ) ) ; +#120 = CC_DESIGN_APPROVAL ( #124, ( #133 ) ) ; +#121 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#122 = EDGE_LOOP ( 'NONE', ( #474, #368, #295, #93 ) ) ; +#123 = ORIENTED_EDGE ( 'NONE', *, *, #443, .F. ) ; +#124 = APPROVAL ( #260, 'UNSPECIFIED' ) ; +#125 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#126 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #625, #262, ( #133 ) ) ; +#127 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #676, #264, ( #133 ) ) ; +#128 = ORIENTED_EDGE ( 'NONE', *, *, #448, .F. ) ; +#129 = CIRCLE ( 'NONE', #182, 5.000000000000000000 ) ; +#130 = CIRCLE ( 'NONE', #397, 3.750000000000000000 ) ; +#131 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147353500E-016, 1.000000000000000000 ) ) ; +#132 = ORIENTED_EDGE ( 'NONE', *, *, #515, .T. ) ; +#133 = SECURITY_CLASSIFICATION ( '', '', #265 ) ; +#134 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ; +#135 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #656, #271, ( #149 ) ) ; +#136 = CIRCLE ( 'NONE', #183, 1.250000000000000200 ) ; +#137 = EDGE_LOOP ( 'NONE', ( #234, #403, #279, #390 ) ) ; +#138 = ORIENTED_EDGE ( 'NONE', *, *, #452, .T. ) ; +#139 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147353500E-016, 1.000000000000000000 ) ) ; +#140 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #615, #272, ( #149 ) ) ; +#141 = CC_DESIGN_APPROVAL ( #144, ( #149 ) ) ; +#142 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#143 = ADVANCED_FACE ( 'NONE', ( #595 ), #62, .F. ) ; +#144 = APPROVAL ( #276, 'UNSPECIFIED' ) ; +#145 = EDGE_LOOP ( 'NONE', ( #123, #166, #32, #424 ) ) ; +#146 = CIRCLE ( 'NONE', #192, 5.000000000000000000 ) ; +#147 = FACE_OUTER_BOUND ( 'NONE', #196, .T. ) ; +#148 = ORIENTED_EDGE ( 'NONE', *, *, #582, .T. ) ; +#149 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #263, .NOT_KNOWN. ) ; +#150 = CIRCLE ( 'NONE', #190, 5.000000000000000000 ) ; +#151 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #627, #277, ( #164 ) ) ; +#152 = EDGE_LOOP ( 'NONE', ( #459, #446, #249, #178 ) ) ; +#153 = VERTEX_POINT ( 'NONE', #110 ) ; +#154 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147352700E-016, 1.000000000000000000 ) ) ; +#155 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #18, #278, ( #164 ) ) ; +#156 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#157 = ORIENTED_EDGE ( 'NONE', *, *, #504, .T. ) ; +#158 = CC_DESIGN_APPROVAL ( #162, ( #164 ) ) ; +#159 = LINE ( 'NONE', #525, #631 ) ; +#160 = FACE_OUTER_BOUND ( 'NONE', #60, .T. ) ; +#161 = VERTEX_POINT ( 'NONE', #23 ) ; +#162 = APPROVAL ( #284, 'UNSPECIFIED' ) ; +#163 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 6.123233995736766300E-016, -5.000000000000000000 ) ) ; +#164 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #149, #222 ) ; +#165 = CIRCLE ( 'NONE', #197, 2.500000000000006700 ) ; +#166 = ORIENTED_EDGE ( 'NONE', *, *, #582, .F. ) ; +#167 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #66, #288, ( #263 ) ) ; +#168 = ORIENTED_EDGE ( 'NONE', *, *, #466, .F. ) ; +#169 = EDGE_CURVE ( 'NONE', #73, #243, #130, .T. ) ; +#170 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#171 = AXIS2_PLACEMENT_3D ( 'NONE', #333, #332, #290 ) ; +#172 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 0.0000000000000000000, -3.750000000000006700 ) ) ; +#173 = CIRCLE ( 'NONE', #193, 1.250000000000000200 ) ; +#174 = FACE_OUTER_BOUND ( 'NONE', #369, .T. ) ; +#175 = FACE_OUTER_BOUND ( 'NONE', #122, .T. ) ; +#176 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#177 = CIRCLE ( 'NONE', #203, 1.250000000000000200 ) ; +#178 = ORIENTED_EDGE ( 'NONE', *, *, #509, .F. ) ; +#179 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#180 = ORIENTED_EDGE ( 'NONE', *, *, #691, .T. ) ; +#181 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #16 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #309, #308, #307 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#182 = AXIS2_PLACEMENT_3D ( 'NONE', #313, #312, #310 ) ; +#183 = AXIS2_PLACEMENT_3D ( 'NONE', #330, #329, #324 ) ; +#184 = ADVANCED_FACE ( 'NONE', ( #256 ), #114, .T. ) ; +#185 = TOROIDAL_SURFACE ( 'NONE', #201, 3.750000000000000900, 1.250000000000000000 ) ; +#186 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#187 = ORIENTED_EDGE ( 'NONE', *, *, #614, .F. ) ; +#188 = ORIENTED_EDGE ( 'NONE', *, *, #413, .F. ) ; +#189 = VERTEX_POINT ( 'NONE', #438 ) ; +#190 = AXIS2_PLACEMENT_3D ( 'NONE', #339, #336, #334 ) ; +#191 = ADVANCED_FACE ( 'NONE', ( #37 ), #52, .F. ) ; +#192 = AXIS2_PLACEMENT_3D ( 'NONE', #349, #344, #343 ) ; +#193 = AXIS2_PLACEMENT_3D ( 'NONE', #363, #361, #359 ) ; +#194 = CIRCLE ( 'NONE', #211, 5.000000000000000000 ) ; +#195 = ORIENTED_EDGE ( 'NONE', *, *, #465, .T. ) ; +#196 = EDGE_LOOP ( 'NONE', ( #686, #529, #228, #188 ) ) ; +#197 = AXIS2_PLACEMENT_3D ( 'NONE', #376, #374, #373 ) ; +#198 = EDGE_CURVE ( 'NONE', #434, #380, #575, .T. ) ; +#199 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#200 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#201 = AXIS2_PLACEMENT_3D ( 'NONE', #689, #4, #487 ) ; +#202 = FACE_OUTER_BOUND ( 'NONE', #323, .T. ) ; +#203 = AXIS2_PLACEMENT_3D ( 'NONE', #383, #382, #381 ) ; +#204 = TOROIDAL_SURFACE ( 'NONE', #356, 3.750000000000000000, 1.250000000000000000 ) ; +#205 = ORIENTED_EDGE ( 'NONE', *, *, #460, .F. ) ; +#206 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#207 = ORIENTED_EDGE ( 'NONE', *, *, #668, .T. ) ; +#208 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 6.123233995736766300E-016, -5.000000000000000000 ) ) ; +#209 = AXIS2_PLACEMENT_3D ( 'NONE', #15, #38, #5 ) ; +#210 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#211 = AXIS2_PLACEMENT_3D ( 'NONE', #550, #490, #489 ) ; +#212 = CIRCLE ( 'NONE', #216, 1.250000000000000200 ) ; +#213 = ORIENTED_EDGE ( 'NONE', *, *, #508, .T. ) ; +#214 = ORIENTED_EDGE ( 'NONE', *, *, #683, .T. ) ; +#215 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#216 = AXIS2_PLACEMENT_3D ( 'NONE', #14, #17, #13 ) ; +#217 = AXIS2_PLACEMENT_3D ( 'NONE', #30, #28, #25 ) ; +#218 = FACE_OUTER_BOUND ( 'NONE', #53, .T. ) ; +#219 = ORIENTED_EDGE ( 'NONE', *, *, #683, .F. ) ; +#220 = ORIENTED_EDGE ( 'NONE', *, *, #499, .T. ) ; +#221 = AXIS2_PLACEMENT_3D ( 'NONE', #58, #55, #40 ) ; +#222 = DESIGN_CONTEXT ( 'detailed design', #286, 'design' ) ; +#223 = AXIS2_PLACEMENT_3D ( 'NONE', #72, #68, #59 ) ; +#224 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#225 = AXIS2_PLACEMENT_3D ( 'NONE', #84, #83, #81 ) ; +#226 = TOROIDAL_SURFACE ( 'NONE', #209, 3.750000000000000000, 1.250000000000000000 ) ; +#227 = ORIENTED_EDGE ( 'NONE', *, *, #499, .F. ) ; +#228 = ORIENTED_EDGE ( 'NONE', *, *, #628, .T. ) ; +#229 = AXIS2_PLACEMENT_3D ( 'NONE', #675, #590, #22 ) ; +#230 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#231 = AXIS2_PLACEMENT_3D ( 'NONE', #97, #99, #82 ) ; +#232 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#233 = CIRCLE ( 'NONE', #221, 5.000000000000000000 ) ; +#234 = ORIENTED_EDGE ( 'NONE', *, *, #589, .F. ) ; +#235 = EDGE_LOOP ( 'NONE', ( #115, #585, #315, #12 ) ) ; +#236 = AXIS2_PLACEMENT_3D ( 'NONE', #660, #41, #644 ) ; +#237 = ADVANCED_FACE ( 'NONE', ( #516 ), #684, .T. ) ; +#238 = AXIS2_PLACEMENT_3D ( 'NONE', #671, #24, #34 ) ; +#239 = ADVANCED_FACE ( 'NONE', ( #445 ), #325, .T. ) ; +#240 = AXIS2_PLACEMENT_3D ( 'NONE', #626, #678, #680 ) ; +#241 = CIRCLE ( 'NONE', #223, 1.250000000000000200 ) ; +#242 = TOROIDAL_SURFACE ( 'NONE', #342, 3.750000000000000900, 1.250000000000000000 ) ; +#243 = VERTEX_POINT ( 'NONE', #482 ) ; +#244 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#245 = AXIS2_PLACEMENT_3D ( 'NONE', #609, #593, #647 ) ; +#246 = AXIS2_PLACEMENT_3D ( 'NONE', #667, #599, #650 ) ; +#247 = AXIS2_PLACEMENT_3D ( 'NONE', #607, #606, #623 ) ; +#248 = CIRCLE ( 'NONE', #217, 2.500000000000000400 ) ; +#249 = ORIENTED_EDGE ( 'NONE', *, *, #462, .F. ) ; +#250 = ORIENTED_EDGE ( 'NONE', *, *, #526, .T. ) ; +#251 = AXIS2_PLACEMENT_3D ( 'NONE', #669, #688, #637 ) ; +#252 = AXIS2_PLACEMENT_3D ( 'NONE', #658, #655, #608 ) ; +#253 = EDGE_LOOP ( 'NONE', ( #317, #327, #11, #441 ) ) ; +#254 = AXIS2_PLACEMENT_3D ( 'NONE', #94, #581, #630 ) ; +#255 = CYLINDRICAL_SURFACE ( 'NONE', #229, 5.000000000000000000 ) ; +#256 = FACE_OUTER_BOUND ( 'NONE', #619, .T. ) ; +#257 = EDGE_LOOP ( 'NONE', ( #102, #45, #270, #128 ) ) ; +#258 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Long_Hammer_Slide_Pin', ( #421, #171 ), #181 ) ; +#259 = APPROVAL_ROLE ( '' ) ; +#260 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#261 = AXIS2_PLACEMENT_3D ( 'NONE', #47, #600, #64 ) ; +#262 = DATE_TIME_ROLE ( 'classification_date' ) ; +#263 = PRODUCT ( 'Long_Hammer_Slide_Pin', 'Long_Hammer_Slide_Pin', '', ( #289 ) ) ; +#264 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#265 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#266 = AXIS2_PLACEMENT_3D ( 'NONE', #470, #134, #139 ) ; +#267 = CIRCLE ( 'NONE', #231, 1.250000000000000200 ) ; +#268 = ORIENTED_EDGE ( 'NONE', *, *, #504, .F. ) ; +#269 = PLANE ( 'NONE', #417 ) ; +#270 = ORIENTED_EDGE ( 'NONE', *, *, #399, .F. ) ; +#271 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#272 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#273 = AXIS2_PLACEMENT_3D ( 'NONE', #473, #118, #54 ) ; +#274 = APPROVAL_ROLE ( '' ) ; +#275 = AXIS2_PLACEMENT_3D ( 'NONE', #657, #121, #645 ) ; +#276 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#277 = DATE_TIME_ROLE ( 'creation_date' ) ; +#278 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#279 = ORIENTED_EDGE ( 'NONE', *, *, #509, .T. ) ; +#280 = TOROIDAL_SURFACE ( 'NONE', #236, 3.750000000000000000, 1.250000000000000000 ) ; +#281 = CIRCLE ( 'NONE', #411, 1.250000000000000200 ) ; +#282 = APPROVAL_ROLE ( '' ) ; +#283 = AXIS2_PLACEMENT_3D ( 'NONE', #643, #651, #620 ) ; +#284 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#285 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #286 ) ; +#286 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#287 = AXIS2_PLACEMENT_3D ( 'NONE', #598, #605, #154 ) ; +#288 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#289 = MECHANICAL_CONTEXT ( 'NONE', #296, 'mechanical' ) ; +#290 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#291 = FACE_OUTER_BOUND ( 'NONE', #326, .T. ) ; +#292 = CARTESIAN_POINT ( 'NONE', ( -26.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#293 = AXIS2_PLACEMENT_3D ( 'NONE', #586, #156, #591 ) ; +#294 = ORIENTED_EDGE ( 'NONE', *, *, #413, .T. ) ; +#295 = ORIENTED_EDGE ( 'NONE', *, *, #532, .T. ) ; +#296 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#297 = AXIS2_PLACEMENT_3D ( 'NONE', #577, #578, #587 ) ; +#298 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #296 ) ; +#299 = ADVANCED_FACE ( 'NONE', ( #92 ), #204, .T. ) ; +#300 = AXIS2_PLACEMENT_3D ( 'NONE', #570, #569, #565 ) ; +#301 = ADVANCED_FACE ( 'NONE', ( #536 ), #87, .T. ) ; +#302 = ORIENTED_EDGE ( 'NONE', *, *, #492, .T. ) ; +#303 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#304 = CIRCLE ( 'NONE', #341, 2.500000000000006700 ) ; +#305 = TOROIDAL_SURFACE ( 'NONE', #404, 3.750000000000000000, 1.250000000000000000 ) ; +#306 = AXIS2_PLACEMENT_3D ( 'NONE', #563, #561, #562 ) ; +#307 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#308 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#309 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#310 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#311 = AXIS2_PLACEMENT_3D ( 'NONE', #551, #542, #109 ) ; +#312 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#313 = CARTESIAN_POINT ( 'NONE', ( 16.25000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#314 = VECTOR ( 'NONE', #601, 1000.000000000000000 ) ; +#315 = ORIENTED_EDGE ( 'NONE', *, *, #616, .T. ) ; +#316 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#317 = ORIENTED_EDGE ( 'NONE', *, *, #91, .F. ) ; +#318 = AXIS2_PLACEMENT_3D ( 'NONE', #554, #556, #131 ) ; +#319 = CARTESIAN_POINT ( 'NONE', ( -26.25000000000000400, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#320 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147352700E-016, 1.000000000000000000 ) ) ; +#321 = AXIS2_PLACEMENT_3D ( 'NONE', #546, #522, #543 ) ; +#322 = AXIS2_PLACEMENT_3D ( 'NONE', #172, #170, #142 ) ; +#323 = EDGE_LOOP ( 'NONE', ( #663, #302, #80, #187 ) ) ; +#324 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147352700E-016, 1.000000000000000000 ) ) ; +#325 = TOROIDAL_SURFACE ( 'NONE', #371, 3.750000000000000000, 1.250000000000000000 ) ; +#326 = EDGE_LOOP ( 'NONE', ( #86, #33, #57, #498 ) ) ; +#327 = ORIENTED_EDGE ( 'NONE', *, *, #169, .T. ) ; +#328 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ; +#329 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ; +#330 = CARTESIAN_POINT ( 'NONE', ( -28.74999999999999600, 4.592425496802575000E-016, 3.750000000000000900 ) ) ; +#331 = AXIS2_PLACEMENT_3D ( 'NONE', #540, #545, #541 ) ; +#332 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#333 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#334 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#335 = AXIS2_PLACEMENT_3D ( 'NONE', #200, #215, #503 ) ; +#336 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#337 = CIRCLE ( 'NONE', #225, 3.750000000000000000 ) ; +#338 = ORIENTED_EDGE ( 'NONE', *, *, #479, .T. ) ; +#339 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#340 = ORIENTED_EDGE ( 'NONE', *, *, #451, .F. ) ; +#341 = AXIS2_PLACEMENT_3D ( 'NONE', #535, #107, #539 ) ; +#342 = AXIS2_PLACEMENT_3D ( 'NONE', #524, #511, #521 ) ; +#343 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#344 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#345 = AXIS2_PLACEMENT_3D ( 'NONE', #518, #186, #510 ) ; +#346 = FACE_OUTER_BOUND ( 'NONE', #528, .T. ) ; +#347 = CIRCLE ( 'NONE', #367, 3.750000000000000000 ) ; +#348 = ORIENTED_EDGE ( 'NONE', *, *, #670, .F. ) ; +#349 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#350 = AXIS2_PLACEMENT_3D ( 'NONE', #493, #477, #501 ) ; +#351 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#352 = EDGE_CURVE ( 'NONE', #380, #161, #347, .T. ) ; +#353 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 4.592425496802582800E-016, 3.750000000000006700 ) ) ; +#354 = LINE ( 'NONE', #681, #314 ) ; +#355 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#356 = AXIS2_PLACEMENT_3D ( 'NONE', #497, #179, #502 ) ; +#357 = ORIENTED_EDGE ( 'NONE', *, *, #628, .F. ) ; +#358 = VERTEX_POINT ( 'NONE', #208 ) ; +#359 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#360 = AXIS2_PLACEMENT_3D ( 'NONE', #463, #468, #450 ) ; +#361 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#362 = EDGE_CURVE ( 'NONE', #243, #73, #77, .T. ) ; +#363 = CARTESIAN_POINT ( 'NONE', ( -28.75000000000000400, 0.0000000000000000000, -3.750000000000000900 ) ) ; +#364 = ADVANCED_FACE ( 'NONE', ( #174 ), #495, .T. ) ; +#365 = CARTESIAN_POINT ( 'NONE', ( -26.25000000000000400, 6.123233995736766300E-016, -5.000000000000000000 ) ) ; +#366 = CIRCLE ( 'NONE', #238, 5.000000000000000000 ) ; +#367 = AXIS2_PLACEMENT_3D ( 'NONE', #199, #513, #206 ) ; +#368 = ORIENTED_EDGE ( 'NONE', *, *, #362, .F. ) ; +#369 = EDGE_LOOP ( 'NONE', ( #20, #338, #294, #75 ) ) ; +#370 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#371 = AXIS2_PLACEMENT_3D ( 'NONE', #485, #453, #491 ) ; +#372 = ADVANCED_FACE ( 'NONE', ( #7 ), #242, .F. ) ; +#373 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#374 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#375 = AXIS2_PLACEMENT_3D ( 'NONE', #370, #224, #230 ) ; +#376 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#377 = CIRCLE ( 'NONE', #245, 5.000000000000000000 ) ; +#378 = ORIENTED_EDGE ( 'NONE', *, *, #653, .T. ) ; +#379 = AXIS2_PLACEMENT_3D ( 'NONE', #476, #478, #480 ) ; +#380 = VERTEX_POINT ( 'NONE', #530 ) ; +#381 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147353500E-016, 1.000000000000000000 ) ) ; +#382 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ; +#383 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 4.592425496802574000E-016, 3.750000000000000000 ) ) ; +#384 = AXIS2_PLACEMENT_3D ( 'NONE', #454, #458, #455 ) ; +#385 = APPROVAL_DATE_TIME ( #428, #144 ) ; +#386 = AXIS2_PLACEMENT_3D ( 'NONE', #176, #303, #244 ) ; +#387 = CARTESIAN_POINT ( 'NONE', ( 16.25000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#388 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#389 = CIRCLE ( 'NONE', #247, 5.000000000000000000 ) ; +#390 = ORIENTED_EDGE ( 'NONE', *, *, #74, .F. ) ; +#391 = VERTEX_POINT ( 'NONE', #531 ) ; +#392 = AXIS2_PLACEMENT_3D ( 'NONE', #388, #316, #355 ) ; +#393 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#394 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#395 = CARTESIAN_POINT ( 'NONE', ( -28.75000000000000400, 0.0000000000000000000, -2.500000000000000400 ) ) ; +#396 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#397 = AXIS2_PLACEMENT_3D ( 'NONE', #442, #210, #449 ) ; +#398 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#399 = EDGE_CURVE ( 'NONE', #434, #507, #304, .T. ) ; +#400 = CARTESIAN_POINT ( 'NONE', ( -27.50000000000000400, 5.357829746269669600E-016, 3.750000000000000000 ) ) ; +#401 = PLANE ( 'NONE', #406 ) ; +#402 = CIRCLE ( 'NONE', #240, 1.250000000000000200 ) ; +#403 = ORIENTED_EDGE ( 'NONE', *, *, #538, .F. ) ; +#404 = AXIS2_PLACEMENT_3D ( 'NONE', #292, #394, #232 ) ; +#405 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#406 = AXIS2_PLACEMENT_3D ( 'NONE', #571, #398, #396 ) ; +#407 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#408 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#409 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#410 = CARTESIAN_POINT ( 'NONE', ( -30.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#411 = AXIS2_PLACEMENT_3D ( 'NONE', #353, #328, #320 ) ; +#412 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#413 = EDGE_CURVE ( 'NONE', #27, #584, #159, .T. ) ; +#414 = TOROIDAL_SURFACE ( 'NONE', #246, 3.750000000000006700, 1.250000000000000000 ) ; +#415 = ORIENTED_EDGE ( 'NONE', *, *, #526, .F. ) ; +#416 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#417 = AXIS2_PLACEMENT_3D ( 'NONE', #412, #407, #405 ) ; +#418 = CARTESIAN_POINT ( 'NONE', ( -28.75000000000000400, 3.827021247335478800E-016, 2.500000000000000400 ) ) ; +#419 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 5.357829746269669600E-016, 3.750000000000000000 ) ) ; +#420 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#421 = MANIFOLD_SOLID_BREP ( 'Fillet1', #63 ) ; +#422 = CIRCLE ( 'NONE', #252, 2.500000000000000400 ) ; +#423 = CYLINDRICAL_SURFACE ( 'NONE', #392, 5.000000000000000000 ) ; +#424 = ORIENTED_EDGE ( 'NONE', *, *, #603, .F. ) ; +#425 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#426 = AXIS2_PLACEMENT_3D ( 'NONE', #573, #456, #425 ) ; +#427 = EDGE_CURVE ( 'NONE', #548, #380, #661, .T. ) ; +#428 = DATE_AND_TIME ( #654, #642 ) ; +#429 = AXIS2_PLACEMENT_3D ( 'NONE', #351, #420, #431 ) ; +#430 = TOROIDAL_SURFACE ( 'NONE', #251, 3.750000000000000900, 1.250000000000000000 ) ; +#431 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#432 = AXIS2_PLACEMENT_3D ( 'NONE', #416, #439, #393 ) ; +#433 = EDGE_LOOP ( 'NONE', ( #108, #67, #685, #205 ) ) ; +#434 = VERTEX_POINT ( 'NONE', #105 ) ; +#435 = CARTESIAN_POINT ( 'NONE', ( -31.25000000000000000, 6.123233995736766300E-016, -5.000000000000000000 ) ) ; +#436 = ADVANCED_FACE ( 'NONE', ( #70 ), #672, .T. ) ; +#437 = AXIS2_PLACEMENT_3D ( 'NONE', #410, #409, #408 ) ; +#438 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#439 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#440 = ADVANCED_FACE ( 'NONE', ( #632 ), #611, .T. ) ; +#441 = ORIENTED_EDGE ( 'NONE', *, *, #668, .F. ) ; +#442 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#443 = EDGE_CURVE ( 'NONE', #85, #39, #618, .T. ) ; +#444 = FACE_OUTER_BOUND ( 'NONE', #253, .T. ) ; +#445 = FACE_OUTER_BOUND ( 'NONE', #137, .T. ) ; +#446 = ORIENTED_EDGE ( 'NONE', *, *, #589, .T. ) ; +#447 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#448 = EDGE_CURVE ( 'NONE', #243, #434, #682, .T. ) ; +#449 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#450 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#451 = EDGE_CURVE ( 'NONE', #96, #537, #659, .T. ) ; +#452 = EDGE_CURVE ( 'NONE', #566, #39, #646, .T. ) ; +#453 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#454 = CARTESIAN_POINT ( 'NONE', ( -28.74999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#455 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#456 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#457 = FACE_OUTER_BOUND ( 'NONE', #103, .T. ) ; +#458 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#459 = ORIENTED_EDGE ( 'NONE', *, *, #523, .F. ) ; +#460 = EDGE_CURVE ( 'NONE', #604, #566, #602, .T. ) ; +#461 = ORIENTED_EDGE ( 'NONE', *, *, #532, .F. ) ; +#462 = EDGE_CURVE ( 'NONE', #153, #391, #574, .T. ) ; +#463 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#464 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 6.123233995736766300E-016, -5.000000000000000000 ) ) ; +#465 = EDGE_CURVE ( 'NONE', #189, #537, #564, .T. ) ; +#466 = EDGE_CURVE ( 'NONE', #507, #161, #583, .T. ) ; +#467 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#468 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#469 = VECTOR ( 'NONE', #125, 1000.000000000000000 ) ; +#470 = CARTESIAN_POINT ( 'NONE', ( 16.25000000000000000, 4.592425496802574000E-016, 3.750000000000000000 ) ) ; +#471 = CIRCLE ( 'NONE', #261, 3.750000000000000000 ) ; +#472 = FACE_OUTER_BOUND ( 'NONE', #113, .T. ) ; +#473 = CARTESIAN_POINT ( 'NONE', ( -27.50000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#474 = ORIENTED_EDGE ( 'NONE', *, *, #653, .F. ) ; +#475 = EDGE_CURVE ( 'NONE', #44, #189, #558, .T. ) ; +#476 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 0.0000000000000000000, -3.750000000000006700 ) ) ; +#477 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#478 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#479 = EDGE_CURVE ( 'NONE', #610, #27, #553, .T. ) ; +#480 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#481 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#482 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 0.0000000000000000000, -3.750000000000000000 ) ) ; +#483 = CIRCLE ( 'NONE', #254, 1.250000000000000200 ) ; +#484 = EDGE_LOOP ( 'NONE', ( #21, #560, #213, #29 ) ) ; +#485 = CARTESIAN_POINT ( 'NONE', ( -31.25000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#486 = ORIENTED_EDGE ( 'NONE', *, *, #465, .F. ) ; +#487 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#488 = EDGE_CURVE ( 'NONE', #584, #358, #552, .T. ) ; +#489 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#490 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#491 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#492 = EDGE_CURVE ( 'NONE', #85, #604, #527, .T. ) ; +#493 = CARTESIAN_POINT ( 'NONE', ( 16.25000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#494 = VECTOR ( 'NONE', #467, 1000.000000000000000 ) ; +#495 = CYLINDRICAL_SURFACE ( 'NONE', #335, 5.000000000000000000 ) ; +#496 = TOROIDAL_SURFACE ( 'NONE', #426, 3.750000000000006700, 1.250000000000000000 ) ; +#497 = CARTESIAN_POINT ( 'NONE', ( -31.25000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#498 = ORIENTED_EDGE ( 'NONE', *, *, #427, .F. ) ; +#499 = EDGE_CURVE ( 'NONE', #548, #566, #534, .T. ) ; +#500 = EDGE_CURVE ( 'NONE', #8, #161, #514, .T. ) ; +#501 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#502 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#503 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#504 = EDGE_CURVE ( 'NONE', #8, #39, #505, .T. ) ; +#505 = LINE ( 'NONE', #116, #469 ) ; +#506 = ORIENTED_EDGE ( 'NONE', *, *, #427, .T. ) ; +#507 = VERTEX_POINT ( 'NONE', #664 ) ; +#508 = EDGE_CURVE ( 'NONE', #161, #380, #471, .T. ) ; +#509 = EDGE_CURVE ( 'NONE', #96, #153, #483, .T. ) ; +#510 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#511 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#512 = ADVANCED_FACE ( 'NONE', ( #457 ), #430, .F. ) ; +#513 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#514 = CIRCLE ( 'NONE', #266, 1.250000000000000200 ) ; +#515 = EDGE_CURVE ( 'NONE', #89, #673, #422, .T. ) ; +#516 = FACE_OUTER_BOUND ( 'NONE', #596, .T. ) ; +#517 = EDGE_LOOP ( 'NONE', ( #674, #19, #486, #2 ) ) ; +#518 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#519 = TOROIDAL_SURFACE ( 'NONE', #429, 3.750000000000006700, 1.250000000000000000 ) ; +#520 = ADVANCED_FACE ( 'NONE', ( #444 ), #414, .F. ) ; +#521 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#522 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#523 = EDGE_CURVE ( 'NONE', #44, #96, #389, .T. ) ; +#524 = CARTESIAN_POINT ( 'NONE', ( -28.74999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#525 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#526 = EDGE_CURVE ( 'NONE', #548, #8, #377, .T. ) ; +#527 = CIRCLE ( 'NONE', #273, 3.750000000000000000 ) ; +#528 = EDGE_LOOP ( 'NONE', ( #227, #250, #157, #43 ) ) ; +#529 = ORIENTED_EDGE ( 'NONE', *, *, #544, .T. ) ; +#530 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 0.0000000000000000000, -3.750000000000000000 ) ) ; +#531 = CARTESIAN_POINT ( 'NONE', ( -30.00000000000000000, 5.357829746269669600E-016, 3.750000000000000000 ) ) ; +#532 = EDGE_CURVE ( 'NONE', #243, #358, #402, .T. ) ; +#533 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#534 = LINE ( 'NONE', #464, #494 ) ; +#535 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#536 = FACE_OUTER_BOUND ( 'NONE', #95, .T. ) ; +#537 = VERTEX_POINT ( 'NONE', #639 ) ; +#538 = EDGE_CURVE ( 'NONE', #96, #44, #366, .T. ) ; +#539 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#540 = CARTESIAN_POINT ( 'NONE', ( 16.25000000000000000, 0.0000000000000000000, -3.750000000000000000 ) ) ; +#541 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#542 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#543 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#544 = EDGE_CURVE ( 'NONE', #610, #358, #354, .T. ) ; +#545 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#546 = CARTESIAN_POINT ( 'NONE', ( -26.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#547 = VECTOR ( 'NONE', #557, 1000.000000000000000 ) ; +#548 = VERTEX_POINT ( 'NONE', #35 ) ; +#549 = ORIENTED_EDGE ( 'NONE', *, *, #198, .T. ) ; +#550 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#551 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#552 = CIRCLE ( 'NONE', #275, 5.000000000000000000 ) ; +#553 = CIRCLE ( 'NONE', #283, 5.000000000000000000 ) ; +#554 = CARTESIAN_POINT ( 'NONE', ( -26.25000000000000400, 4.592425496802574000E-016, 3.750000000000000000 ) ) ; +#555 = ORIENTED_EDGE ( 'NONE', *, *, #479, .F. ) ; +#556 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ; +#557 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#558 = LINE ( 'NONE', #597, #547 ) ; +#559 = ORIENTED_EDGE ( 'NONE', *, *, #515, .F. ) ; +#560 = ORIENTED_EDGE ( 'NONE', *, *, #466, .T. ) ; +#561 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#562 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#563 = CARTESIAN_POINT ( 'NONE', ( -26.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#564 = CIRCLE ( 'NONE', #293, 5.000000000000000000 ) ; +#565 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#566 = VERTEX_POINT ( 'NONE', #365 ) ; +#567 = ORIENTED_EDGE ( 'NONE', *, *, #616, .F. ) ; +#568 = ADVANCED_FACE ( 'NONE', ( #346 ), #255, .T. ) ; +#569 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#570 = CARTESIAN_POINT ( 'NONE', ( -26.25000000000000400, 0.0000000000000000000, -3.750000000000000000 ) ) ; +#571 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -1.561251128379126100E-014, 0.0000000000000000000 ) ) ; +#572 = ADVANCED_FACE ( 'NONE', ( #291 ), #280, .T. ) ; +#573 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#574 = CIRCLE ( 'NONE', #297, 3.750000000000000000 ) ; +#575 = CIRCLE ( 'NONE', #379, 1.250000000000000200 ) ; +#576 = ORIENTED_EDGE ( 'NONE', *, *, #687, .T. ) ; +#577 = CARTESIAN_POINT ( 'NONE', ( -30.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#578 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#579 = EDGE_CURVE ( 'NONE', #85, #673, #267, .T. ) ; +#580 = CARTESIAN_POINT ( 'NONE', ( -31.25000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#581 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#582 = EDGE_CURVE ( 'NONE', #604, #85, #337, .T. ) ; +#583 = CIRCLE ( 'NONE', #287, 1.250000000000000200 ) ; +#584 = VERTEX_POINT ( 'NONE', #617 ) ; +#585 = ORIENTED_EDGE ( 'NONE', *, *, #614, .T. ) ; +#586 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#587 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#588 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #164 ) ; +#589 = EDGE_CURVE ( 'NONE', #44, #391, #241, .T. ) ; +#590 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#591 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#592 = EDGE_LOOP ( 'NONE', ( #168, #207, #549, #613 ) ) ; +#593 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#594 = VECTOR ( 'NONE', #50, 1000.000000000000000 ) ; +#595 = FACE_OUTER_BOUND ( 'NONE', #592, .T. ) ; +#596 = EDGE_LOOP ( 'NONE', ( #340, #634, #88, #219 ) ) ; +#597 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#598 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 4.592425496802582800E-016, 3.750000000000006700 ) ) ; +#599 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#600 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#601 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#602 = CIRCLE ( 'NONE', #300, 1.250000000000000200 ) ; +#603 = EDGE_CURVE ( 'NONE', #39, #566, #233, .T. ) ; +#604 = VERTEX_POINT ( 'NONE', #98 ) ; +#605 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ; +#606 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#607 = CARTESIAN_POINT ( 'NONE', ( -31.25000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#608 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#609 = CARTESIAN_POINT ( 'NONE', ( 16.25000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#610 = VERTEX_POINT ( 'NONE', #65 ) ; +#611 = CYLINDRICAL_SURFACE ( 'NONE', #311, 5.000000000000000000 ) ; +#612 = FACE_OUTER_BOUND ( 'NONE', #433, .T. ) ; +#613 = ORIENTED_EDGE ( 'NONE', *, *, #352, .T. ) ; +#614 = EDGE_CURVE ( 'NONE', #673, #89, #248, .T. ) ; +#615 = PERSON_AND_ORGANIZATION ( #481, #69 ) ; +#616 = EDGE_CURVE ( 'NONE', #89, #153, #212, .T. ) ; +#617 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#618 = CIRCLE ( 'NONE', #318, 1.250000000000000200 ) ; +#619 = EDGE_LOOP ( 'NONE', ( #180, #220, #138, #268 ) ) ; +#620 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#621 = LOCAL_TIME ( 17, 46, 30.00000000000000000, #666 ) ; +#622 = ADVANCED_FACE ( 'NONE', ( #218 ), #226, .T. ) ; +#623 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#624 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#625 = DATE_AND_TIME ( #624, #100 ) ; +#626 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, -3.750000000000000000 ) ) ; +#627 = DATE_AND_TIME ( #1, #6 ) ; +#628 = EDGE_CURVE ( 'NONE', #358, #584, #194, .T. ) ; +#629 = ADVANCED_FACE ( 'NONE', ( #202 ), #185, .F. ) ; +#630 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#631 = VECTOR ( 'NONE', #533, 1000.000000000000000 ) ; +#632 = FACE_OUTER_BOUND ( 'NONE', #517, .T. ) ; +#633 = CIRCLE ( 'NONE', #437, 3.750000000000000000 ) ; +#634 = ORIENTED_EDGE ( 'NONE', *, *, #538, .T. ) ; +#635 = PERSON_AND_ORGANIZATION ( #481, #69 ) ; +#636 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#637 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#638 = PERSON_AND_ORGANIZATION ( #481, #69 ) ; +#639 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 6.123233995736766300E-016, -5.000000000000000000 ) ) ; +#640 = APPROVAL_PERSON_ORGANIZATION ( #638, #144, #274 ) ; +#641 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#642 = LOCAL_TIME ( 17, 46, 30.00000000000000000, #641 ) ; +#643 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#644 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#645 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#646 = CIRCLE ( 'NONE', #306, 5.000000000000000000 ) ; +#647 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#648 = EDGE_LOOP ( 'NONE', ( #132, #576, #49, #567 ) ) ; +#649 = ORIENTED_EDGE ( 'NONE', *, *, #677, .F. ) ; +#650 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#651 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#652 = APPROVAL_PERSON_ORGANIZATION ( #635, #124, #259 ) ; +#653 = EDGE_CURVE ( 'NONE', #73, #584, #177, .T. ) ; +#654 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#655 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#656 = PERSON_AND_ORGANIZATION ( #481, #69 ) ; +#657 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#658 = CARTESIAN_POINT ( 'NONE', ( -28.75000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#659 = LINE ( 'NONE', #163, #594 ) ; +#660 = CARTESIAN_POINT ( 'NONE', ( 16.25000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#661 = CIRCLE ( 'NONE', #331, 1.250000000000000200 ) ; +#662 = FACE_OUTER_BOUND ( 'NONE', #257, .T. ) ; +#663 = ORIENTED_EDGE ( 'NONE', *, *, #579, .F. ) ; +#664 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 3.827021247335482700E-016, 2.500000000000006700 ) ) ; +#665 = DATE_AND_TIME ( #636, #621 ) ; +#666 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#667 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#668 = EDGE_CURVE ( 'NONE', #507, #434, #165, .T. ) ; +#669 = CARTESIAN_POINT ( 'NONE', ( -28.75000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#670 = EDGE_CURVE ( 'NONE', #604, #89, #173, .T. ) ; +#671 = CARTESIAN_POINT ( 'NONE', ( -31.25000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#672 = TOROIDAL_SURFACE ( 'NONE', #321, 3.750000000000000000, 1.250000000000000000 ) ; +#673 = VERTEX_POINT ( 'NONE', #418 ) ; +#674 = ORIENTED_EDGE ( 'NONE', *, *, #523, .T. ) ; +#675 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#676 = PERSON_AND_ORGANIZATION ( #481, #69 ) ; +#677 = EDGE_CURVE ( 'NONE', #27, #610, #146, .T. ) ; +#678 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#679 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#680 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#681 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 6.123233995736766300E-016, -5.000000000000000000 ) ) ; +#682 = CIRCLE ( 'NONE', #322, 1.250000000000000200 ) ; +#683 = EDGE_CURVE ( 'NONE', #537, #189, #150, .T. ) ; +#684 = CYLINDRICAL_SURFACE ( 'NONE', #360, 5.000000000000000000 ) ; +#685 = ORIENTED_EDGE ( 'NONE', *, *, #452, .F. ) ; +#686 = ORIENTED_EDGE ( 'NONE', *, *, #677, .T. ) ; +#687 = EDGE_CURVE ( 'NONE', #673, #391, #136, .T. ) ; +#688 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#689 = CARTESIAN_POINT ( 'NONE', ( -28.75000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#690 = APPROVAL_DATE_TIME ( #665, #124 ) ; +#691 = EDGE_CURVE ( 'NONE', #8, #548, #129, .T. ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STEP/Short_Hammer_Slide_Pin.step b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Short_Hammer_Slide_Pin.step new file mode 100644 index 0000000..912cfd5 --- /dev/null +++ b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Short_Hammer_Slide_Pin.step @@ -0,0 +1,192 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Short_Hammer_Slide_Pin.STEP', + '2013-11-10T07:46:07', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = APPROVAL ( #107, 'UNSPECIFIED' ) ; +#2 = AXIS2_PLACEMENT_3D ( 'NONE', #44, #58, #47 ) ; +#3 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.0000000000000000000, 4.999999999999999100 ) ) ; +#4 = AXIS2_PLACEMENT_3D ( 'NONE', #64, #60, #136 ) ; +#5 = EDGE_CURVE ( 'NONE', #111, #12, #141, .T. ) ; +#6 = ORIENTED_EDGE ( 'NONE', *, *, #17, .F. ) ; +#7 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #33, .NOT_KNOWN. ) ; +#8 = CC_DESIGN_APPROVAL ( #61, ( #113 ) ) ; +#9 = EDGE_CURVE ( 'NONE', #12, #111, #159, .T. ) ; +#10 = ADVANCED_FACE ( 'NONE', ( #162 ), #117, .T. ) ; +#11 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #153, #83, ( #113 ) ) ; +#12 = VERTEX_POINT ( 'NONE', #3 ) ; +#13 = LOCAL_TIME ( 17, 46, 7.000000000000000000, #145 ) ; +#14 = ADVANCED_FACE ( 'NONE', ( #116 ), #132, .T. ) ; +#15 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #56, #34, ( #7 ) ) ; +#16 = CC_DESIGN_APPROVAL ( #1, ( #21 ) ) ; +#17 = EDGE_CURVE ( 'NONE', #89, #139, #125, .T. ) ; +#18 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Short_Hammer_Slide_Pin', ( #103, #2 ), #101 ) ; +#19 = EDGE_LOOP ( 'NONE', ( #163, #6 ) ) ; +#20 = APPROVAL ( #79, 'UNSPECIFIED' ) ; +#21 = SECURITY_CLASSIFICATION ( '', '', #45 ) ; +#22 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #33 ) ) ; +#23 = AXIS2_PLACEMENT_3D ( 'NONE', #82, #78, #77 ) ; +#24 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #49 ) ; +#25 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#26 = DESIGN_CONTEXT ( 'detailed design', #99, 'design' ) ; +#27 = EDGE_LOOP ( 'NONE', ( #170, #166, #38, #164 ) ) ; +#28 = AXIS2_PLACEMENT_3D ( 'NONE', #87, #94, #92 ) ; +#29 = EDGE_CURVE ( 'NONE', #12, #139, #123, .T. ) ; +#30 = PERSON_AND_ORGANIZATION ( #43, #127 ) ; +#31 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #172, #104, ( #21 ) ) ; +#32 = PERSON_AND_ORGANIZATION ( #43, #127 ) ; +#33 = PRODUCT ( 'Short_Hammer_Slide_Pin', 'Short_Hammer_Slide_Pin', '', ( #129 ) ) ; +#34 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#35 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #152, #84, ( #113 ) ) ; +#36 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 6.123233995736765300E-016, -4.999999999999999100 ) ) ; +#37 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#38 = ORIENTED_EDGE ( 'NONE', *, *, #17, .T. ) ; +#39 = ORIENTED_EDGE ( 'NONE', *, *, #9, .T. ) ; +#40 = AXIS2_PLACEMENT_3D ( 'NONE', #71, #59, #52 ) ; +#41 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #30, #109, ( #21 ) ) ; +#42 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #74, 'distance_accuracy_value', 'NONE'); +#43 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#44 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#45 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#46 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #32, #70, ( #7 ) ) ; +#47 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#48 = EDGE_CURVE ( 'NONE', #139, #89, #124, .T. ) ; +#49 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#50 = LOCAL_TIME ( 17, 46, 7.000000000000000000, #167 ) ; +#51 = LOCAL_TIME ( 17, 46, 7.000000000000000000, #147 ) ; +#52 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#53 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#54 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#55 = CC_DESIGN_APPROVAL ( #20, ( #7 ) ) ; +#56 = PERSON_AND_ORGANIZATION ( #43, #127 ) ; +#57 = EDGE_CURVE ( 'NONE', #111, #89, #173, .T. ) ; +#58 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61 = APPROVAL ( #91, 'UNSPECIFIED' ) ; +#62 = EDGE_LOOP ( 'NONE', ( #144, #157, #143, #158 ) ) ; +#63 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#64 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66 = AXIS2_PLACEMENT_3D ( 'NONE', #65, #174, #140 ) ; +#67 = AXIS2_PLACEMENT_3D ( 'NONE', #142, #171, #25 ) ; +#68 = DATE_AND_TIME ( #160, #51 ) ; +#69 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.999999999999999100 ) ) ; +#70 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#71 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72 = PLANE ( 'NONE', #40 ) ; +#73 = APPROVAL_ROLE ( '' ) ; +#74 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#75 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#76 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#79 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#80 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#81 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#82 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#83 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#84 = DATE_TIME_ROLE ( 'creation_date' ) ; +#85 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#86 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 6.123233995736765300E-016, -4.999999999999999100 ) ) ; +#87 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#88 = APPROVAL_ROLE ( '' ) ; +#89 = VERTEX_POINT ( 'NONE', #86 ) ; +#90 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 6.123233995736765300E-016, -4.999999999999999100 ) ) ; +#91 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#92 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#93 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#94 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#95 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.0000000000000000000, 4.999999999999999100 ) ) ; +#96 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #137, #37, ( #33 ) ) ; +#97 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#98 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#99 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#100 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #99 ) ; +#101 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #42 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #74, #54, #53 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#103 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #168 ) ; +#104 = DATE_TIME_ROLE ( 'classification_date' ) ; +#105 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #113 ) ; +#106 = APPROVAL_ROLE ( '' ) ; +#107 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#108 = ADVANCED_FACE ( 'NONE', ( #119 ), #122, .T. ) ; +#109 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#110 = CC_DESIGN_SECURITY_CLASSIFICATION ( #21, ( #7 ) ) ; +#111 = VERTEX_POINT ( 'NONE', #36 ) ; +#112 = AXIS2_PLACEMENT_3D ( 'NONE', #81, #76, #80 ) ; +#113 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #7, #26 ) ; +#114 = FACE_OUTER_BOUND ( 'NONE', #19, .T. ) ; +#115 = AXIS2_PLACEMENT_3D ( 'NONE', #97, #98, #102 ) ; +#116 = FACE_OUTER_BOUND ( 'NONE', #118, .T. ) ; +#117 = CYLINDRICAL_SURFACE ( 'NONE', #66, 4.999999999999999100 ) ; +#118 = EDGE_LOOP ( 'NONE', ( #39, #161 ) ) ; +#119 = FACE_OUTER_BOUND ( 'NONE', #62, .T. ) ; +#120 = VECTOR ( 'NONE', #85, 1000.000000000000000 ) ; +#121 = VECTOR ( 'NONE', #93, 1000.000000000000000 ) ; +#122 = CYLINDRICAL_SURFACE ( 'NONE', #23, 4.999999999999999100 ) ; +#123 = LINE ( 'NONE', #95, #121 ) ; +#124 = CIRCLE ( 'NONE', #112, 4.999999999999999100 ) ; +#125 = CIRCLE ( 'NONE', #28, 4.999999999999999100 ) ; +#126 = DATE_AND_TIME ( #130, #131 ) ; +#127 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#128 = SHAPE_DEFINITION_REPRESENTATION ( #105, #18 ) ; +#129 = MECHANICAL_CONTEXT ( 'NONE', #49, 'mechanical' ) ; +#130 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#131 = LOCAL_TIME ( 17, 46, 7.000000000000000000, #133 ) ; +#132 = PLANE ( 'NONE', #115 ) ; +#133 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#134 = APPROVAL_PERSON_ORGANIZATION ( #135, #61, #88 ) ; +#135 = PERSON_AND_ORGANIZATION ( #43, #127 ) ; +#136 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#137 = PERSON_AND_ORGANIZATION ( #43, #127 ) ; +#138 = PERSON_AND_ORGANIZATION ( #43, #127 ) ; +#139 = VERTEX_POINT ( 'NONE', #69 ) ; +#140 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#141 = CIRCLE ( 'NONE', #4, 4.999999999999999100 ) ; +#142 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#143 = ORIENTED_EDGE ( 'NONE', *, *, #29, .T. ) ; +#144 = ORIENTED_EDGE ( 'NONE', *, *, #57, .F. ) ; +#145 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#146 = APPROVAL_DATE_TIME ( #126, #61 ) ; +#147 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#148 = PERSON_AND_ORGANIZATION ( #43, #127 ) ; +#149 = APPROVAL_PERSON_ORGANIZATION ( #148, #1, #106 ) ; +#150 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#151 = LOCAL_TIME ( 17, 46, 7.000000000000000000, #150 ) ; +#152 = DATE_AND_TIME ( #63, #13 ) ; +#153 = PERSON_AND_ORGANIZATION ( #43, #127 ) ; +#154 = APPROVAL_DATE_TIME ( #156, #1 ) ; +#155 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#156 = DATE_AND_TIME ( #155, #151 ) ; +#157 = ORIENTED_EDGE ( 'NONE', *, *, #9, .F. ) ; +#158 = ORIENTED_EDGE ( 'NONE', *, *, #48, .T. ) ; +#159 = CIRCLE ( 'NONE', #67, 4.999999999999999100 ) ; +#160 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#161 = ORIENTED_EDGE ( 'NONE', *, *, #5, .T. ) ; +#162 = FACE_OUTER_BOUND ( 'NONE', #27, .T. ) ; +#163 = ORIENTED_EDGE ( 'NONE', *, *, #48, .F. ) ; +#164 = ORIENTED_EDGE ( 'NONE', *, *, #29, .F. ) ; +#165 = ADVANCED_FACE ( 'NONE', ( #114 ), #72, .F. ) ; +#166 = ORIENTED_EDGE ( 'NONE', *, *, #57, .T. ) ; +#167 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#168 = CLOSED_SHELL ( 'NONE', ( #10, #108, #14, #165 ) ) ; +#169 = APPROVAL_PERSON_ORGANIZATION ( #138, #20, #73 ) ; +#170 = ORIENTED_EDGE ( 'NONE', *, *, #5, .F. ) ; +#171 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#172 = DATE_AND_TIME ( #75, #50 ) ; +#173 = LINE ( 'NONE', #90, #120 ) ; +#174 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#175 = APPROVAL_DATE_TIME ( #68, #20 ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STEP/Trigger.step b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Trigger.step new file mode 100644 index 0000000..59ba6f7 --- /dev/null +++ b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Trigger.step @@ -0,0 +1,1834 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Trigger.STEP', + '2013-11-10T07:44:18', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = TOROIDAL_SURFACE ( 'NONE', #1061, 0.5000000000000000000, 2.000000000000000000 ) ; +#2 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.23688826215462700, 8.113205315711198300 ) ) ; +#4 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -8.876261603717766800, 12.46582718872069900 ) ) ; +#5 = ADVANCED_FACE ( 'NONE', ( #598 ), #1363, .F. ) ; +#6 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -15.66255172105539900, 8.073042939484883700 ) ) ; +#7 = AXIS2_PLACEMENT_3D ( 'NONE', #808, #805, #801 ) ; +#8 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -7.417960657609972600, 11.08331309699880600 ) ) ; +#9 = AXIS2_PLACEMENT_3D ( 'NONE', #905, #862, #859 ) ; +#10 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -16.50966165280716800, 8.018177281315875100 ) ) ; +#12 = ORIENTED_EDGE ( 'NONE', *, *, #1323, .T. ) ; +#13 = ADVANCED_FACE ( 'NONE', ( #365 ), #555, .T. ) ; +#14 = ORIENTED_EDGE ( 'NONE', *, *, #515, .F. ) ; +#15 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999814000, -8.531220038051722900, 12.78530860088930000 ) ) ; +#16 = VERTEX_POINT ( 'NONE', #1220 ) ; +#17 = CIRCLE ( 'NONE', #1075, 2.000000000000000000 ) ; +#18 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -24.99999999999999300, 8.908980334482196300 ) ) ; +#19 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #366 ) ; +#20 = ORIENTED_EDGE ( 'NONE', *, *, #803, .F. ) ; +#21 = CIRCLE ( 'NONE', #951, 2.000000000000000000 ) ; +#22 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23 = CYLINDRICAL_SURFACE ( 'NONE', #162, 2.500000000000000400 ) ; +#24 = CYLINDRICAL_SURFACE ( 'NONE', #831, 2.499999999999999600 ) ; +#25 = AXIS2_PLACEMENT_3D ( 'NONE', #883, #910, #878 ) ; +#26 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -16.93233976002696700, 8.003279708770852700 ) ) ; +#27 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -8.876261603485541900, 12.46582718843260200 ) ) ; +#28 = PLANE ( 'NONE', #1102 ) ; +#29 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -18.19783459398329500, 7.994890595618256800 ) ) ; +#30 = EDGE_CURVE ( 'NONE', #1601, #479, #509, .T. ) ; +#31 = ORIENTED_EDGE ( 'NONE', *, *, #1238, .F. ) ; +#32 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#33 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34 = LINE ( 'NONE', #1303, #899 ) ; +#35 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -8.755738599182807400, 12.57119687229602100 ) ) ; +#36 = ORIENTED_EDGE ( 'NONE', *, *, #1276, .F. ) ; +#37 = CIRCLE ( 'NONE', #865, 2.000000000000000000 ) ; +#38 = FACE_OUTER_BOUND ( 'NONE', #1393, .T. ) ; +#39 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000185300, -8.755738599200000700, 12.57119687231386600 ) ) ; +#40 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -19.03814334693832000, 8.037252147783986400 ) ) ; +#41 = AXIS2_PLACEMENT_3D ( 'NONE', #797, #795, #790 ) ; +#42 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -9.505456137804841900, 11.95865453176900800 ) ) ; +#43 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#44 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -20.71176587879800100, 8.221972889820738900 ) ) ; +#45 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -7.580573100414459200, 10.94139169650380900 ) ) ; +#46 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -21.54510234311411700, 8.364007777193778600 ) ) ; +#47 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -7.108454270325933200, 11.37847331747744000 ) ) ; +#48 = AXIS2_PLACEMENT_3D ( 'NONE', #925, #923, #921 ) ; +#49 = ORIENTED_EDGE ( 'NONE', *, *, #539, .F. ) ; +#50 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000001900, 15.00000000000000200, -38.75000000000000000 ) ) ; +#51 = ORIENTED_EDGE ( 'NONE', *, *, #548, .T. ) ; +#52 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#53 = ORIENTED_EDGE ( 'NONE', *, *, #796, .F. ) ; +#54 = PERSON_AND_ORGANIZATION ( #1473, #309 ) ; +#55 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#56 = ORIENTED_EDGE ( 'NONE', *, *, #1589, .F. ) ; +#57 = APPROVAL_PERSON_ORGANIZATION ( #54, #356, #1597 ) ; +#58 = ADVANCED_FACE ( 'NONE', ( #466 ), #426, .T. ) ; +#59 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.090249291540239100, 12.73833224558546600 ) ) ; +#60 = ORIENTED_EDGE ( 'NONE', *, *, #1467, .T. ) ; +#61 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#62 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -23.20324252833485800, 8.770058588345316200 ) ) ; +#63 = AXIS2_PLACEMENT_3D ( 'NONE', #1240, #941, #1267 ) ; +#64 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -2.500000000000000000, -38.75000000000000000 ) ) ; +#65 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000005000, 2.500000000000000000, -24.17893218813454200 ) ) ; +#66 = ADVANCED_FACE ( 'NONE', ( #533 ), #1251, .F. ) ; +#67 = CARTESIAN_POINT ( 'NONE', ( 7.487882566636647100E-013, -7.976654442290978900, 13.45516551457884800 ) ) ; +#68 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.31164176175997800, 9.312325625971691800 ) ) ; +#69 = CARTESIAN_POINT ( 'NONE', ( 2.449200000000000300, 2.500000000000000000, 4.999999999999999100 ) ) ; +#70 = ORIENTED_EDGE ( 'NONE', *, *, #1556, .T. ) ; +#71 = ADVANCED_FACE ( 'NONE', ( #579 ), #379, .F. ) ; +#72 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.296089456550080700, 12.35871291200831700 ) ) ; +#73 = ORIENTED_EDGE ( 'NONE', *, *, #1002, .F. ) ; +#74 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -7.848419889470654300, 13.69166122792734800 ) ) ; +#75 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -10.70949422079413100, 9.154272716096494700 ) ) ; +#76 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#77 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -7.848419889470654300, 13.69166122792734800 ) ) ; +#78 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -7.848419889470654300, 13.69166122792734800 ) ) ; +#79 = ADVANCED_FACE ( 'NONE', ( #576 ), #1105, .T. ) ; +#80 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -24.80277563773198700, 9.368439310809765900 ) ) ; +#81 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999998800, -9.988832072364648000, 9.744220378943776200 ) ) ; +#82 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -9.988832072364648000, 9.744220378943776200 ) ) ; +#83 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -24.01674353581402200, 9.031032299498218000 ) ) ; +#84 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999998800, -17.80743157155044900, 8.542136437520691000 ) ) ; +#85 = ADVANCED_FACE ( 'NONE', ( #406 ), #1154, .F. ) ; +#86 = ORIENTED_EDGE ( 'NONE', *, *, #1434, .F. ) ; +#87 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -17.80743157155044900, 8.542136437520691000 ) ) ; +#88 = VERTEX_POINT ( 'NONE', #1094 ) ; +#89 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#90 = ORIENTED_EDGE ( 'NONE', *, *, #1080, .F. ) ; +#91 = FACE_OUTER_BOUND ( 'NONE', #1532, .T. ) ; +#92 = ORIENTED_EDGE ( 'NONE', *, *, #517, .F. ) ; +#93 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.3944487245360096500, -0.9189179526551405400 ) ) ; +#94 = ORIENTED_EDGE ( 'NONE', *, *, #1238, .T. ) ; +#95 = ADVANCED_FACE ( 'NONE', ( #350 ), #398, .T. ) ; +#96 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#97 = VERTEX_POINT ( 'NONE', #1017 ) ; +#98 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9189179526551406500, 0.3944487245360096500 ) ) ; +#99 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -24.80277563773198700, 9.368439310809765900 ) ) ; +#100 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#101 = AXIS2_PLACEMENT_3D ( 'NONE', #888, #886, #884 ) ; +#102 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -24.01387818865996900, 11.20627521612004800 ) ) ; +#103 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -27.50000000000000000, 4.999999999999999100 ) ) ; +#104 = ORIENTED_EDGE ( 'NONE', *, *, #1519, .T. ) ; +#105 = VERTEX_POINT ( 'NONE', #947 ) ; +#106 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -24.01387818865996900, 11.20627521612004800 ) ) ; +#107 = FACE_OUTER_BOUND ( 'NONE', #1149, .T. ) ; +#108 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -5.650706642057635100, 12.49999999999999600 ) ) ; +#109 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -6.090249291540239100, 12.73833224558546600 ) ) ; +#110 = ADVANCED_FACE ( 'NONE', ( #312 ), #291, .T. ) ; +#111 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 2.500000000000000000, 4.999999999999998200 ) ) ; +#112 = ADVANCED_FACE ( 'NONE', ( #326 ), #1059, .F. ) ; +#113 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#114 = AXIS2_PLACEMENT_3D ( 'NONE', #1278, #1246, #1242 ) ; +#115 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 0.0000000000000000000, 12.49999999999999800 ) ) ; +#116 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 0.5000000000000004400, -38.75000000000000000 ) ) ; +#117 = ADVANCED_FACE ( 'NONE', ( #452 ), #223, .T. ) ; +#118 = ORIENTED_EDGE ( 'NONE', *, *, #1193, .T. ) ; +#119 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#120 = VERTEX_POINT ( 'NONE', #609 ) ; +#121 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 5.242189406417884900, -28.74999999999999600 ) ) ; +#122 = VERTEX_POINT ( 'NONE', #607 ) ; +#123 = APPROVAL_DATE_TIME ( #125, #209 ) ; +#124 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#125 = DATE_AND_TIME ( #128, #139 ) ; +#126 = ADVANCED_FACE ( 'NONE', ( #201 ), #182, .T. ) ; +#127 = ORIENTED_EDGE ( 'NONE', *, *, #1538, .T. ) ; +#128 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#129 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 0.0000000000000000000, 12.49999999999999800 ) ) ; +#130 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#131 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.4766644911709406700, -0.8790852989652077100 ) ) ; +#132 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 2.500000000000000000, 12.49999999999999800 ) ) ; +#133 = AXIS2_PLACEMENT_3D ( 'NONE', #1313, #1282, #1280 ) ; +#134 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.83098092370215500, 10.06632461879768000 ) ) ; +#135 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#136 = ORIENTED_EDGE ( 'NONE', *, *, #575, .T. ) ; +#137 = ORIENTED_EDGE ( 'NONE', *, *, #1556, .F. ) ; +#138 = ORIENTED_EDGE ( 'NONE', *, *, #1178, .T. ) ; +#139 = LOCAL_TIME ( 17, 44, 18.00000000000000000, #141 ) ; +#140 = ORIENTED_EDGE ( 'NONE', *, *, #964, .F. ) ; +#141 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#142 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.168404344971010300E-016, 0.0000000000000000000 ) ) ; +#143 = CYLINDRICAL_SURFACE ( 'NONE', #194, 2.499999999999999600 ) ; +#144 = APPROVAL_PERSON_ORGANIZATION ( #158, #209, #1554 ) ; +#145 = ADVANCED_FACE ( 'NONE', ( #330 ), #601, .F. ) ; +#146 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -7.848419889470654300, 13.69166122792734800 ) ) ; +#147 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -2.500000000000000000, 4.999999999999999100 ) ) ; +#148 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#149 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#150 = ADVANCED_FACE ( 'NONE', ( #245 ), #143, .T. ) ; +#151 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 13.57460947032089400, -33.75000000000000000 ) ) ; +#152 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 0.5000000000000004400, -38.75000000000000000 ) ) ; +#153 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -27.50000000000000000, 4.999999999999999100 ) ) ; +#154 = ORIENTED_EDGE ( 'NONE', *, *, #819, .T. ) ; +#155 = VERTEX_POINT ( 'NONE', #494 ) ; +#156 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#157 = ORIENTED_EDGE ( 'NONE', *, *, #600, .T. ) ; +#158 = PERSON_AND_ORGANIZATION ( #1473, #309 ) ; +#159 = FACE_OUTER_BOUND ( 'NONE', #1270, .T. ) ; +#160 = DATE_AND_TIME ( #161, #177 ) ; +#161 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#162 = AXIS2_PLACEMENT_3D ( 'NONE', #1308, #478, #524 ) ; +#163 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#164 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #165 ) ) ; +#165 = PRODUCT ( 'Trigger', 'Trigger', '', ( #1616 ) ) ; +#166 = ADVANCED_FACE ( 'NONE', ( #159 ), #445, .T. ) ; +#167 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#168 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#169 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#170 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999999400, 10.00000000000000000, 9.999999999999998200 ) ) ; +#171 = EDGE_LOOP ( 'NONE', ( #932, #1405, #1457, #1493 ) ) ; +#172 = ADVANCED_FACE ( 'NONE', ( #38 ), #23, .T. ) ; +#173 = FACE_OUTER_BOUND ( 'NONE', #1545, .T. ) ; +#174 = CC_DESIGN_SECURITY_CLASSIFICATION ( #247, ( #316 ) ) ; +#175 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#176 = VERTEX_POINT ( 'NONE', #1296 ) ; +#177 = LOCAL_TIME ( 17, 44, 18.00000000000000000, #180 ) ; +#178 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#179 = ORIENTED_EDGE ( 'NONE', *, *, #1589, .T. ) ; +#180 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#181 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -24.99999999999999300, 8.908980334482196300 ) ) ; +#182 = CYLINDRICAL_SURFACE ( 'NONE', #254, 2.000000000000000000 ) ; +#183 = PERSON_AND_ORGANIZATION ( #1473, #309 ) ; +#184 = ADVANCED_FACE ( 'NONE', ( #107 ), #1289, .F. ) ; +#185 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -13.14012574021799500, 8.428476755116753000 ) ) ; +#186 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#187 = CC_DESIGN_APPROVAL ( #209, ( #247 ) ) ; +#188 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#189 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#190 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 10.00000000000000000, 4.999999999999998200 ) ) ; +#191 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#192 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#193 = VERTEX_POINT ( 'NONE', #1301 ) ; +#194 = AXIS2_PLACEMENT_3D ( 'NONE', #475, #528, #569 ) ; +#195 = ORIENTED_EDGE ( 'NONE', *, *, #1445, .F. ) ; +#196 = PERSON_AND_ORGANIZATION ( #1473, #309 ) ; +#197 = ORIENTED_EDGE ( 'NONE', *, *, #1467, .F. ) ; +#198 = PERSON_AND_ORGANIZATION ( #1473, #309 ) ; +#199 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -8.426816143425956100, 12.89430977556574500 ) ) ; +#200 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#201 = FACE_OUTER_BOUND ( 'NONE', #670, .T. ) ; +#202 = APPROVAL_DATE_TIME ( #204, #300 ) ; +#203 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999999400, 10.00000000000000000, 4.999999999999998200 ) ) ; +#204 = DATE_AND_TIME ( #218, #221 ) ; +#205 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 0.0000000000000000000, 15.00000000000000000 ) ) ; +#206 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999999800, 10.00000000000000000, 9.999999999999998200 ) ) ; +#207 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.5000000000000004400, -38.75000000000000000 ) ) ; +#208 = ADVANCED_FACE ( 'NONE', ( #173 ), #1258, .F. ) ; +#209 = APPROVAL ( #1560, 'UNSPECIFIED' ) ; +#210 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000002300, 15.00000000000000200, -38.75000000000000000 ) ) ; +#211 = VERTEX_POINT ( 'NONE', #1272 ) ; +#212 = PLANE ( 'NONE', #1257 ) ; +#213 = AXIS2_PLACEMENT_3D ( 'NONE', #591, #563, #516 ) ; +#214 = ORIENTED_EDGE ( 'NONE', *, *, #825, .F. ) ; +#215 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#216 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -7.848419889470654300, 13.69166122792734800 ) ) ; +#217 = ORIENTED_EDGE ( 'NONE', *, *, #1551, .F. ) ; +#218 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#219 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #160, #1564, ( #247 ) ) ; +#220 = ORIENTED_EDGE ( 'NONE', *, *, #1369, .T. ) ; +#221 = LOCAL_TIME ( 17, 44, 18.00000000000000000, #224 ) ; +#222 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -8.024940778207618300, 13.36611375979593900 ) ) ; +#223 = CYLINDRICAL_SURFACE ( 'NONE', #269, 0.5000000000000004400 ) ; +#224 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#225 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #80, #83, #62, #46, #44, #40, #29, #26, #11, #6, #3, #1366, #185, #843, #968, #75, #68, #1117, #973, #1127, #1252, #442, #703, #1489, #1233, #422 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002557559828101135500, 0.005115119656202270900, 0.007672679484303407200, 0.008951459398353975000, 0.01023023931240454200, 0.01278779914050567900, 0.01406657905455624600, 0.01534535896860681400, 0.01790291879670795000, 0.01854230875373323600, 0.01918169871075851900, 0.02046047862480909400 ), + .UNSPECIFIED. ) ; +#226 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#227 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999997900, -8.248749211882781700, 13.07952358315708200 ) ) ; +#228 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#229 = ADVANCED_FACE ( 'NONE', ( #1660 ), #1534, .T. ) ; +#230 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -8.756650239989202300, 12.55600763148912000 ) ) ; +#231 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #183, #1569, ( #247 ) ) ; +#232 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -9.042347097591862900, 12.31988535381376300 ) ) ; +#233 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#234 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -9.636203360795383000, 11.90061888832404000 ) ) ; +#235 = ADVANCED_FACE ( 'NONE', ( #1645 ), #1232, .F. ) ; +#236 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -9.947498666469588400, 11.71453930734435300 ) ) ; +#237 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -2.500000000000000000, 15.00000000000000000 ) ) ; +#238 = ORIENTED_EDGE ( 'NONE', *, *, #944, .T. ) ; +#239 = ORIENTED_EDGE ( 'NONE', *, *, #713, .F. ) ; +#240 = APPROVAL_PERSON_ORGANIZATION ( #243, #300, #1585 ) ; +#241 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.66255172104391800, 8.073042939626121800 ) ) ; +#242 = ORIENTED_EDGE ( 'NONE', *, *, #1519, .F. ) ; +#243 = PERSON_AND_ORGANIZATION ( #1473, #309 ) ; +#244 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -8.426816143438403000, 12.89430977557623100 ) ) ; +#245 = FACE_OUTER_BOUND ( 'NONE', #1331, .T. ) ; +#246 = DATE_AND_TIME ( #249, #265 ) ; +#247 = SECURITY_CLASSIFICATION ( '', '', #1573 ) ; +#248 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000002300, 11.48913988196212400, -36.55868809443030200 ) ) ; +#249 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#250 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trigger', ( #463, #394 ), #473 ) ; +#251 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999997900, -10.59151080115789200, 11.37749874967578600 ) ) ; +#252 = CARTESIAN_POINT ( 'NONE', ( 7.898400000000001400, -10.92599198487987900, 11.22607764571064100 ) ) ; +#253 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#254 = AXIS2_PLACEMENT_3D ( 'NONE', #677, #648, #882 ) ; +#255 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -11.94167538489759800, 10.82102907452442500 ) ) ; +#256 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #196, #1575, ( #316 ) ) ; +#257 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -12.63435292114868800, 10.61466953246390200 ) ) ; +#258 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#259 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -14.04184262296403100, 10.29255477223612800 ) ) ; +#260 = ORIENTED_EDGE ( 'NONE', *, *, #929, .T. ) ; +#261 = CARTESIAN_POINT ( 'NONE', ( 7.898400000000001400, -14.75684620364584100, 10.17758307915380700 ) ) ; +#262 = VERTEX_POINT ( 'NONE', #1260 ) ; +#263 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#264 = ORIENTED_EDGE ( 'NONE', *, *, #724, .F. ) ; +#265 = LOCAL_TIME ( 17, 44, 18.00000000000000000, #268 ) ; +#266 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -16.20653739809169000, 10.02821291984030700 ) ) ; +#267 = EDGE_LOOP ( 'NONE', ( #552, #894, #1268, #242 ) ) ; +#268 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#269 = AXIS2_PLACEMENT_3D ( 'NONE', #664, #828, #936 ) ; +#270 = PERSON_AND_ORGANIZATION ( #1473, #309 ) ; +#271 = CARTESIAN_POINT ( 'NONE', ( 7.898400000000001400, -16.93040379126388500, 9.995140668482267900 ) ) ; +#272 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #198, #1582, ( #316 ) ) ; +#273 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -24.99999999999999300, 8.908980334482196300 ) ) ; +#274 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -6.961041562251690400, 11.53203807000712700 ) ) ; +#275 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -18.37094500583004100, 10.00599453467091800 ) ) ; +#276 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#277 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -19.08855029898276700, 10.04984743555896500 ) ) ; +#278 = CC_DESIGN_APPROVAL ( #300, ( #316 ) ) ; +#279 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -20.51810920348293300, 10.21903381801286800 ) ) ; +#280 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, -24.99999999999999300, 8.908980334482196300 ) ) ; +#281 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.5000000000000000000, 12.49999999999999800 ) ) ; +#282 = ORIENTED_EDGE ( 'NONE', *, *, #1358, .F. ) ; +#283 = CARTESIAN_POINT ( 'NONE', ( 7.898400000000001400, -21.23008495547712100, 10.34404809676146900 ) ) ; +#284 = ORIENTED_EDGE ( 'NONE', *, *, #944, .F. ) ; +#285 = APPROVAL_DATE_TIME ( #288, #356 ) ; +#286 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999997900, -22.64703816502843400, 10.69497141693869200 ) ) ; +#287 = ORIENTED_EDGE ( 'NONE', *, *, #575, .F. ) ; +#288 = DATE_AND_TIME ( #292, #294 ) ; +#289 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999999400, 10.00000000000000000, 9.999999999999998200 ) ) ; +#290 = AXIS2_PLACEMENT_3D ( 'NONE', #1020, #902, #844 ) ; +#291 = CYLINDRICAL_SURFACE ( 'NONE', #295, 2.000000000000000000 ) ; +#292 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#293 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999999400, 2.500000000000000000, 9.999999999999998200 ) ) ; +#294 = LOCAL_TIME ( 17, 44, 18.00000000000000000, #76 ) ; +#295 = AXIS2_PLACEMENT_3D ( 'NONE', #956, #988, #1003 ) ; +#296 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#297 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 10.00000000000000000, 9.999999999999998200 ) ) ; +#298 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#299 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#300 = APPROVAL ( #1587, 'UNSPECIFIED' ) ; +#301 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -15.44527532636638900, 10.10274430809840500 ) ) ; +#302 = VERTEX_POINT ( 'NONE', #930 ) ; +#303 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#304 = VERTEX_POINT ( 'NONE', #946 ) ; +#305 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#306 = ORIENTED_EDGE ( 'NONE', *, *, #1445, .T. ) ; +#307 = PERSON_AND_ORGANIZATION ( #1473, #309 ) ; +#308 = VERTEX_POINT ( 'NONE', #1259 ) ; +#309 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#310 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 0.5000000000000000000, 12.49999999999999800 ) ) ; +#311 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002800, 2.500000000000000400, -24.17893218813454200 ) ) ; +#312 = FACE_OUTER_BOUND ( 'NONE', #897, .T. ) ; +#313 = SHAPE_DEFINITION_REPRESENTATION ( #19, #250 ) ; +#314 = AXIS2_PLACEMENT_3D ( 'NONE', #989, #1021, #903 ) ; +#315 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -23.34199067556340200, 10.91786516622729600 ) ) ; +#316 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #165, .NOT_KNOWN. ) ; +#317 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -24.01387818865996900, 11.20627521612004800 ) ) ; +#318 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#319 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#320 = ADVANCED_FACE ( 'NONE', ( #91 ), #1643, .T. ) ; +#321 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -25.49999999999999600, 8.908980334482196300 ) ) ; +#322 = AXIS2_PLACEMENT_3D ( 'NONE', #1156, #1046, #1036 ) ; +#323 = DIRECTION ( 'NONE', ( -2.168404344971006900E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#324 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #246, #1594, ( #366 ) ) ; +#325 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#326 = FACE_OUTER_BOUND ( 'NONE', #441, .T. ) ; +#327 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -27.50000000000000000, 4.999999999999999100 ) ) ; +#328 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -5.650706642057635100, 12.99999999999999800 ) ) ; +#329 = VERTEX_POINT ( 'NONE', #931 ) ; +#330 = FACE_OUTER_BOUND ( 'NONE', #1654, .T. ) ; +#331 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#332 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -25.50000000000000400, 4.999999999999999100 ) ) ; +#333 = EDGE_CURVE ( 'NONE', #785, #193, #1640, .T. ) ; +#334 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#335 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #270, #1595, ( #366 ) ) ; +#336 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999999800, 10.00000000000000000, 9.999999999999998200 ) ) ; +#337 = PLANE ( 'NONE', #654 ) ; +#338 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -25.50000000000000400, 0.0000000000000000000 ) ) ; +#339 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 8.535533905932791000, -32.28553390593275900 ) ) ; +#340 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000400, -38.75000000000000000 ) ) ; +#341 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#342 = ORIENTED_EDGE ( 'NONE', *, *, #819, .F. ) ; +#343 = CC_DESIGN_APPROVAL ( #356, ( #366 ) ) ; +#344 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#345 = ORIENTED_EDGE ( 'NONE', *, *, #1002, .T. ) ; +#346 = ORIENTED_EDGE ( 'NONE', *, *, #1391, .T. ) ; +#347 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -8.137585484809083200, 13.22667284711761900 ) ) ; +#348 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#349 = EDGE_LOOP ( 'NONE', ( #1438, #56, #733, #696 ) ) ; +#350 = FACE_OUTER_BOUND ( 'NONE', #171, .T. ) ; +#351 = ORIENTED_EDGE ( 'NONE', *, *, #1356, .F. ) ; +#352 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#353 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.7071067811865440200, 0.7071067811865511300 ) ) ; +#354 = AXIS2_PLACEMENT_3D ( 'NONE', #1212, #1196, #1172 ) ; +#355 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -25.50000000000000400, 0.0000000000000000000 ) ) ; +#356 = APPROVAL ( #1599, 'UNSPECIFIED' ) ; +#357 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -27.50000000000000000, 4.999999999999999100 ) ) ; +#358 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#359 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#360 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#361 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#362 = AXIS2_PLACEMENT_3D ( 'NONE', #1216, #1263, #1236 ) ; +#363 = VERTEX_POINT ( 'NONE', #901 ) ; +#364 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 2.500000000000000000, 4.999999999999998200 ) ) ; +#365 = FACE_OUTER_BOUND ( 'NONE', #871, .T. ) ; +#366 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #316, #1387 ) ; +#367 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#368 = ADVANCED_FACE ( 'NONE', ( #1658 ), #891, .T. ) ; +#369 = ORIENTED_EDGE ( 'NONE', *, *, #842, .F. ) ; +#370 = CYLINDRICAL_SURFACE ( 'NONE', #429, 2.500000000000000400 ) ; +#371 = DIRECTION ( 'NONE', ( 5.418365821595540400E-017, 0.7808688094430305000, 0.6246950475544240700 ) ) ; +#372 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -5.650706642057635100, 13.00000000000000000 ) ) ; +#373 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 15.00000000000000200, -33.75000000000000000 ) ) ; +#374 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#375 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -6.542980539081853000, 12.01244373497981700 ) ) ; +#376 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#377 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -24.99999999999999300, 8.908980334482196300 ) ) ; +#378 = EDGE_LOOP ( 'NONE', ( #446, #140, #788, #485 ) ) ; +#379 = CYLINDRICAL_SURFACE ( 'NONE', #362, 5.000000000000000900 ) ; +#380 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#381 = AXIS2_PLACEMENT_3D ( 'NONE', #1239, #1256, #1234 ) ; +#382 = ORIENTED_EDGE ( 'NONE', *, *, #1228, .T. ) ; +#383 = CYLINDRICAL_SURFACE ( 'NONE', #439, 2.499999999999999600 ) ; +#384 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#385 = VERTEX_POINT ( 'NONE', #866 ) ; +#386 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #307, #1614, ( #165 ) ) ; +#387 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#388 = ORIENTED_EDGE ( 'NONE', *, *, #1476, .T. ) ; +#389 = FACE_OUTER_BOUND ( 'NONE', #700, .T. ) ; +#390 = CARTESIAN_POINT ( 'NONE', ( 9.898399999998503100, -7.976654442290979800, 13.45516551457884100 ) ) ; +#391 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#392 = AXIS2_PLACEMENT_3D ( 'NONE', #1305, #1297, #1317 ) ; +#393 = PLANE ( 'NONE', #1373 ) ; +#394 = AXIS2_PLACEMENT_3D ( 'NONE', #374, #226, #1624 ) ; +#395 = PLANE ( 'NONE', #682 ) ; +#396 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#397 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#398 = TOROIDAL_SURFACE ( 'NONE', #314, 0.5000000000000000000, 2.000000000000000000 ) ; +#399 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 10.00000000000004800, -33.75000000000000000 ) ) ; +#400 = VERTEX_POINT ( 'NONE', #874 ) ; +#401 = FACE_OUTER_BOUND ( 'NONE', #1409, .T. ) ; +#402 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -7.976654441113646900, 13.45516551394658200 ) ) ; +#403 = ORIENTED_EDGE ( 'NONE', *, *, #949, .F. ) ; +#404 = VECTOR ( 'NONE', #387, 1000.000000000000000 ) ; +#405 = ADVANCED_FACE ( 'NONE', ( #1655 ), #1627, .T. ) ; +#406 = FACE_OUTER_BOUND ( 'NONE', #908, .T. ) ; +#407 = LINE ( 'NONE', #1140, #404 ) ; +#408 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -8.137585484784187500, 13.22667284709664100 ) ) ; +#409 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#410 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 0.0000000000000000000, 13.00000000000000000 ) ) ; +#411 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -24.01387818865996900, 11.20627521612004800 ) ) ; +#412 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 0.0000000000000000000, 13.00000000000000000 ) ) ; +#413 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -6.296089456550080700, 12.35871291200831700 ) ) ; +#414 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 0.5000000000000004400, -38.75000000000000000 ) ) ; +#415 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#416 = ORIENTED_EDGE ( 'NONE', *, *, #1274, .T. ) ; +#417 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#418 = VERTEX_POINT ( 'NONE', #849 ) ; +#419 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#420 = VERTEX_POINT ( 'NONE', #847 ) ; +#421 = CIRCLE ( 'NONE', #480, 2.000000000000000000 ) ; +#422 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.090249291540239100, 12.73833224558546600 ) ) ; +#423 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -1.734723475976808300E-016 ) ) ; +#424 = AXIS2_PLACEMENT_3D ( 'NONE', #1571, #1359, #1341 ) ; +#425 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -24.99999999999999300, 8.908980334482196300 ) ) ; +#426 = CYLINDRICAL_SURFACE ( 'NONE', #392, 2.000000000000000000 ) ; +#427 = VERTEX_POINT ( 'NONE', #846 ) ; +#428 = CIRCLE ( 'NONE', #504, 0.5000000000000004400 ) ; +#429 = AXIS2_PLACEMENT_3D ( 'NONE', #280, #191, #276 ) ; +#430 = ORIENTED_EDGE ( 'NONE', *, *, #585, .T. ) ; +#431 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 13.57460947032089600, -34.25000000000000000 ) ) ; +#432 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#433 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 3.469446951953611000E-015, -1.000000000000000000 ) ) ; +#434 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, 8.673617379884041600E-017 ) ) ; +#435 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#436 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 0.5000000000000000000, 12.49999999999999800 ) ) ; +#437 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 13.57460947032089400, -34.25000000000000000 ) ) ; +#438 = AXIS2_PLACEMENT_3D ( 'NONE', #1346, #1381, #1629 ) ; +#439 = AXIS2_PLACEMENT_3D ( 'NONE', #297, #358, #915 ) ; +#440 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 15.00000000000000200, -33.75000000000000000 ) ) ; +#441 = EDGE_LOOP ( 'NONE', ( #848, #1541, #546, #889, #1576, #238 ) ) ; +#442 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -7.108454269819223000, 11.37847331706463000 ) ) ; +#443 = VERTEX_POINT ( 'NONE', #853 ) ; +#444 = ADVANCED_FACE ( 'NONE', ( #1623 ), #1602, .T. ) ; +#445 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #455, #497, #449 ), + ( #402, #390, #413 ), + ( #408, #347, #375 ), + ( #244, #199, #274 ), + ( #562, #15, #47 ), + ( #35, #39, #8 ), + ( #27, #4, #45 ), + ( #42, #687, #686 ), + ( #683, #1650, #1647 ), + ( #1635, #1633, #1631 ), + ( #1621, #1613, #1600 ), + ( #1593, #1590, #1553 ), + ( #1549, #1527, #1523 ), + ( #1516, #1505, #1500 ), + ( #1492, #1485, #1482 ), + ( #1471, #1468, #1465 ), + ( #1463, #1453, #1450 ), + ( #1449, #1446, #1442 ), + ( #1432, #1429, #1426 ), + ( #1425, #1421, #1418 ), + ( #1412, #1402, #1400 ), + ( #1397, #1390, #1385 ), + ( #1377, #1376, #1375 ), + ( #1370, #1361, #1357 ), + ( #1354, #1352, #1340 ), + ( #1337, #1334, #1333 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 1.517883041479706200E-018, 0.001273022029655094700, 0.001909533044482641200, 0.002546044059310187700, 0.005092088118620373800, 0.006365110148275466800, 0.007638132177930559800, 0.01018417623724074600, 0.01145719826689584100, 0.01273022029655093400, 0.01527626435586112000, 0.01782230841517130600, 0.02036835247448149200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865477900, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865477900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#446 = ORIENTED_EDGE ( 'NONE', *, *, #644, .T. ) ; +#447 = CIRCLE ( 'NONE', #493, 2.000000000000000000 ) ; +#448 = ORIENTED_EDGE ( 'NONE', *, *, #1572, .F. ) ; +#449 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -6.090249291540238200, 12.73833224558546800 ) ) ; +#450 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#451 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.50000000000000400, 8.908980334482196300 ) ) ; +#452 = FACE_OUTER_BOUND ( 'NONE', #717, .T. ) ; +#453 = CIRCLE ( 'NONE', #531, 2.499999999999998700 ) ; +#454 = EDGE_CURVE ( 'NONE', #593, #1622, #1619, .T. ) ; +#455 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -7.848419889470654300, 13.69166122792734800 ) ) ; +#456 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#457 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#458 = VERTEX_POINT ( 'NONE', #821 ) ; +#459 = DIRECTION ( 'NONE', ( 8.673617379884040400E-017, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#460 = ORIENTED_EDGE ( 'NONE', *, *, #642, .F. ) ; +#461 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 12.49999999999999800 ) ) ; +#462 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999999400, 10.00000000000000000, 9.999999999999998200 ) ) ; +#463 = MANIFOLD_SOLID_BREP ( 'Fillet13', #1454 ) ; +#464 = ORIENTED_EDGE ( 'NONE', *, *, #1399, .F. ) ; +#465 = CIRCLE ( 'NONE', #566, 5.000000000000000900 ) ; +#466 = FACE_OUTER_BOUND ( 'NONE', #378, .T. ) ; +#467 = VECTOR ( 'NONE', #1634, 1000.000000000000000 ) ; +#468 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000001900, 2.500000000000000000, -38.75000000000000000 ) ) ; +#469 = ORIENTED_EDGE ( 'NONE', *, *, #803, .T. ) ; +#470 = CIRCLE ( 'NONE', #554, 2.000000000000000000 ) ; +#471 = EDGE_CURVE ( 'NONE', #1543, #1557, #1608, .T. ) ; +#472 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -27.50000000000000000, 8.908980334482196300 ) ) ; +#473 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #1277 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #32, #1469, #1656 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#474 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -27.50000000000000000, 4.999999999999999100 ) ) ; +#475 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 10.00000000000000000, 4.999999999999998200 ) ) ; +#476 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -24.01387818865996900, 11.20627521612004800 ) ) ; +#477 = EDGE_CURVE ( 'NONE', #1367, #1264, #1626, .T. ) ; +#478 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#479 = VERTEX_POINT ( 'NONE', #823 ) ; +#480 = AXIS2_PLACEMENT_3D ( 'NONE', #372, #325, #344 ) ; +#481 = ORIENTED_EDGE ( 'NONE', *, *, #1126, .T. ) ; +#482 = VERTEX_POINT ( 'NONE', #817 ) ; +#483 = CIRCLE ( 'NONE', #541, 0.5000000000000004400 ) ; +#484 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -23.34199067556340200, 10.91786516622729600 ) ) ; +#485 = ORIENTED_EDGE ( 'NONE', *, *, #1152, .F. ) ; +#486 = LINE ( 'NONE', #537, #467 ) ; +#487 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000400, -22.64703816502844400, 10.69497141693869600 ) ) ; +#488 = VECTOR ( 'NONE', #1300, 1000.000000000000000 ) ; +#489 = VECTOR ( 'NONE', #450, 1000.000000000000000 ) ; +#490 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -5.650706642057635100, 12.99999999999999800 ) ) ; +#491 = EDGE_CURVE ( 'NONE', #443, #998, #1586, .T. ) ; +#492 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -21.23008495547712500, 10.34404809676146700 ) ) ; +#493 = AXIS2_PLACEMENT_3D ( 'NONE', #414, #435, #432 ) ; +#494 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000002300, 5.242189406417884900, -38.75000000000000000 ) ) ; +#495 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.168404344971010100E-016, -1.173774534824853400E-032 ) ) ; +#496 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -20.51810920348292200, 10.21903381801286800 ) ) ; +#497 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -7.848419889470653400, 13.69166122792734800 ) ) ; +#498 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999999400, 2.500000000000000400, 4.999999999999998200 ) ) ; +#499 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -19.08855029898276400, 10.04984743555896600 ) ) ; +#500 = EDGE_CURVE ( 'NONE', #660, #653, #1584, .T. ) ; +#501 = VERTEX_POINT ( 'NONE', #768 ) ; +#502 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000900, -18.37094500583004500, 10.00599453467091800 ) ) ; +#503 = ORIENTED_EDGE ( 'NONE', *, *, #1551, .T. ) ; +#504 = AXIS2_PLACEMENT_3D ( 'NONE', #626, #617, #603 ) ; +#505 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#506 = EDGE_LOOP ( 'NONE', ( #1526, #137, #786, #1452 ) ) ; +#507 = CIRCLE ( 'NONE', #588, 0.5000000000000004400 ) ; +#508 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -16.93040379126387800, 9.995140668482262600 ) ) ; +#509 = LINE ( 'NONE', #1474, #488 ) ; +#510 = CYLINDRICAL_SURFACE ( 'NONE', #581, 0.5000000000000004400 ) ; +#511 = ORIENTED_EDGE ( 'NONE', *, *, #919, .F. ) ; +#512 = CIRCLE ( 'NONE', #632, 2.000000000000000000 ) ; +#513 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000900, -16.20653739809169000, 10.02821291984030500 ) ) ; +#514 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -2.500000000000000000, 4.999999999999999100 ) ) ; +#515 = EDGE_CURVE ( 'NONE', #155, #1416, #1578, .T. ) ; +#516 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#517 = EDGE_CURVE ( 'NONE', #1069, #16, #1581, .T. ) ; +#518 = CARTESIAN_POINT ( 'NONE', ( 1.999999999999999600, -14.75684620364582700, 10.17758307915381100 ) ) ; +#519 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -5.650706642057635100, 15.00000000000000000 ) ) ; +#520 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000400, -14.04184262296402400, 10.29255477223613000 ) ) ; +#521 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#522 = ORIENTED_EDGE ( 'NONE', *, *, #919, .T. ) ; +#523 = ORIENTED_EDGE ( 'NONE', *, *, #1318, .F. ) ; +#524 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#525 = EDGE_CURVE ( 'NONE', #211, #593, #1566, .T. ) ; +#526 = ORIENTED_EDGE ( 'NONE', *, *, #1380, .T. ) ; +#527 = FACE_OUTER_BOUND ( 'NONE', #506, .T. ) ; +#528 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#529 = VERTEX_POINT ( 'NONE', #739 ) ; +#530 = VECTOR ( 'NONE', #834, 1000.000000000000000 ) ; +#531 = AXIS2_PLACEMENT_3D ( 'NONE', #892, #681, #781 ) ; +#532 = CARTESIAN_POINT ( 'NONE', ( -0.001050000000007748100, 11.48913988196212400, -36.55868809443030200 ) ) ; +#533 = FACE_OUTER_BOUND ( 'NONE', #813, .T. ) ; +#534 = LINE ( 'NONE', #1106, #530 ) ; +#535 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -12.63435292114868400, 10.61466953246391000 ) ) ; +#536 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000400, -11.94167538489759800, 10.82102907452442300 ) ) ; +#537 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.500000000000000000, 15.00000000000000000 ) ) ; +#538 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999999800, 10.00000000000000000, 4.999999999999998200 ) ) ; +#539 = EDGE_CURVE ( 'NONE', #1557, #262, #1531, .T. ) ; +#540 = CARTESIAN_POINT ( 'NONE', ( 1.999999999999999600, -10.92599198487987300, 11.22607764571063500 ) ) ; +#541 = AXIS2_PLACEMENT_3D ( 'NONE', #1085, #997, #1022 ) ; +#542 = CARTESIAN_POINT ( 'NONE', ( 1.999999999999999600, -10.59151080115788400, 11.37749874967578900 ) ) ; +#543 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#544 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000400, -9.947498666469583000, 11.71453930734435800 ) ) ; +#545 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -9.636203360795375900, 11.90061888832404200 ) ) ; +#546 = ORIENTED_EDGE ( 'NONE', *, *, #1318, .T. ) ; +#547 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000004100, 3.964466094067281800, -27.71446609406729400 ) ) ; +#548 = EDGE_CURVE ( 'NONE', #998, #16, #1533, .T. ) ; +#549 = EDGE_LOOP ( 'NONE', ( #729, #53, #1142, #769 ) ) ; +#550 = CYLINDRICAL_SURFACE ( 'NONE', #604, 10.00000000000000000 ) ; +#551 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -9.042347097591852300, 12.31988535381377200 ) ) ; +#552 = ORIENTED_EDGE ( 'NONE', *, *, #1215, .T. ) ; +#553 = VECTOR ( 'NONE', #712, 1000.000000000000000 ) ; +#554 = AXIS2_PLACEMENT_3D ( 'NONE', #1338, #131, #1201 ) ; +#555 = TOROIDAL_SURFACE ( 'NONE', #424, 0.5000000000000000000, 2.000000000000000000 ) ; +#556 = LINE ( 'NONE', #586, #489 ) ; +#557 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000400, -8.756650239989193500, 12.55600763148912300 ) ) ; +#558 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -27.50000000000000000, 4.999999999999999100 ) ) ; +#559 = FACE_OUTER_BOUND ( 'NONE', #572, .T. ) ; +#560 = CARTESIAN_POINT ( 'NONE', ( 1.999999999999999600, -8.248749211882776300, 13.07952358315708700 ) ) ; +#561 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -24.99999999999999300, 11.40898033448219600 ) ) ; +#562 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -8.531220038068918000, 12.78530860090714300 ) ) ; +#563 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#564 = EDGE_CURVE ( 'NONE', #998, #1436, #1563, .T. ) ; +#565 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#566 = AXIS2_PLACEMENT_3D ( 'NONE', #1537, #1459, #1448 ) ; +#567 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#568 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.168404344971010300E-016, 0.0000000000000000000 ) ) ; +#569 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#570 = EDGE_LOOP ( 'NONE', ( #1208, #1054, #214, #750 ) ) ; +#571 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 0.0000000000000000000, 13.00000000000000000 ) ) ; +#572 = EDGE_LOOP ( 'NONE', ( #1000, #351, #14, #1200 ) ) ; +#573 = ORIENTED_EDGE ( 'NONE', *, *, #863, .F. ) ; +#574 = LINE ( 'NONE', #1503, #553 ) ; +#575 = EDGE_CURVE ( 'NONE', #1367, #1567, #1518, .T. ) ; +#576 = FACE_OUTER_BOUND ( 'NONE', #870, .T. ) ; +#577 = CIRCLE ( 'NONE', #665, 2.499999999999999600 ) ; +#578 = CARTESIAN_POINT ( 'NONE', ( 1.999999999999999600, -8.024940778207529500, 13.36611375979590700 ) ) ; +#579 = FACE_OUTER_BOUND ( 'NONE', #349, .T. ) ; +#580 = VECTOR ( 'NONE', #1043, 1000.000000000000000 ) ; +#581 = AXIS2_PLACEMENT_3D ( 'NONE', #1237, #1378, #323 ) ; +#582 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#583 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -7.848419889470654300, 13.69166122792734800 ) ) ; +#584 = DIRECTION ( 'NONE', ( -1.083673164319107800E-016, -0.7808688094430305000, -0.6246950475544240700 ) ) ; +#585 = EDGE_CURVE ( 'NONE', #1314, #890, #1515, .T. ) ; +#586 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 2.500000000000000000, 12.49999999999999800 ) ) ; +#587 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 15.00000000000000200, -33.75000000000000000 ) ) ; +#588 = AXIS2_PLACEMENT_3D ( 'NONE', #1661, #1653, #1651 ) ; +#589 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#590 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 2.500000000000000400, -38.75000000000000000 ) ) ; +#591 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 2.500000000000000000, 15.00000000000000000 ) ) ; +#592 = ORIENTED_EDGE ( 'NONE', *, *, #1304, .T. ) ; +#593 = VERTEX_POINT ( 'NONE', #705 ) ; +#594 = CIRCLE ( 'NONE', #610, 0.5000000000000004400 ) ; +#595 = ORIENTED_EDGE ( 'NONE', *, *, #477, .T. ) ; +#596 = LINE ( 'NONE', #210, #580 ) ; +#597 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#598 = FACE_OUTER_BOUND ( 'NONE', #1525, .T. ) ; +#599 = VECTOR ( 'NONE', #649, 1000.000000000000000 ) ; +#600 = EDGE_CURVE ( 'NONE', #302, #176, #1494, .T. ) ; +#601 = PLANE ( 'NONE', #213 ) ; +#602 = VECTOR ( 'NONE', #167, 1000.000000000000000 ) ; +#603 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#604 = AXIS2_PLACEMENT_3D ( 'NONE', #121, #142, #200 ) ; +#605 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -27.50000000000000000, 8.908980334482196300 ) ) ; +#606 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 2.500000000000000000, 15.00000000000000000 ) ) ; +#607 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -24.99999999999999300, 9.408980334482196300 ) ) ; +#608 = EDGE_CURVE ( 'NONE', #16, #105, #1484, .T. ) ; +#609 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 0.5000000000000000000, 12.49999999999999800 ) ) ; +#610 = AXIS2_PLACEMENT_3D ( 'NONE', #1374, #303, #1095 ) ; +#611 = ADVANCED_FACE ( 'NONE', ( #1502 ), #1455, .F. ) ; +#612 = ORIENTED_EDGE ( 'NONE', *, *, #806, .T. ) ; +#613 = ORIENTED_EDGE ( 'NONE', *, *, #743, .T. ) ; +#614 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#615 = ORIENTED_EDGE ( 'NONE', *, *, #993, .T. ) ; +#616 = FACE_OUTER_BOUND ( 'NONE', #986, .T. ) ; +#617 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#618 = ORIENTED_EDGE ( 'NONE', *, *, #1579, .T. ) ; +#619 = LINE ( 'NONE', #206, #602 ) ; +#620 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#621 = EDGE_LOOP ( 'NONE', ( #1181, #464, #1477, #1511 ) ) ; +#622 = CIRCLE ( 'NONE', #695, 0.5000000000000004400 ) ; +#623 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.49999999999999600, 8.908980334482196300 ) ) ; +#624 = EDGE_CURVE ( 'NONE', #105, #1314, #1462, .T. ) ; +#625 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -27.50000000000000000, 0.0000000000000000000 ) ) ; +#626 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 0.0000000000000000000, 12.49999999999999800 ) ) ; +#627 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -27.50000000000000000, 8.908980334482196300 ) ) ; +#628 = ADVANCED_FACE ( 'NONE', ( #1439 ), #643, .T. ) ; +#629 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000002300, 15.00000000000005000, -38.74999999999995000 ) ) ; +#630 = EDGE_CURVE ( 'NONE', #479, #1472, #1437, .T. ) ; +#631 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 2.500000000000000000, 12.49999999999999800 ) ) ; +#632 = AXIS2_PLACEMENT_3D ( 'NONE', #1646, #1615, #1591 ) ; +#633 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.068481283613056700E-018, -1.000000000000000000 ) ) ; +#634 = VERTEX_POINT ( 'NONE', #605 ) ; +#635 = VECTOR ( 'NONE', #391, 1000.000000000000000 ) ; +#636 = DIRECTION ( 'NONE', ( 1.226634733346693900E-016, -0.7071067811865511300, 0.7071067811865440200 ) ) ; +#637 = ORIENTED_EDGE ( 'NONE', *, *, #690, .F. ) ; +#638 = LINE ( 'NONE', #311, #641 ) ; +#639 = ORIENTED_EDGE ( 'NONE', *, *, #525, .F. ) ; +#640 = LINE ( 'NONE', #289, #599 ) ; +#641 = VECTOR ( 'NONE', #298, 1000.000000000000000 ) ; +#642 = EDGE_CURVE ( 'NONE', #1164, #1416, #1480, .T. ) ; +#643 = PLANE ( 'NONE', #1447 ) ; +#644 = EDGE_CURVE ( 'NONE', #1384, #97, #1423, .T. ) ; +#645 = DIRECTION ( 'NONE', ( 1.734723475976806800E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#646 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 8.068481283613056700E-018 ) ) ; +#647 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.734723475976808300E-016 ) ) ; +#648 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#649 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#650 = EDGE_CURVE ( 'NONE', #418, #176, #926, .T. ) ; +#651 = ORIENTED_EDGE ( 'NONE', *, *, #680, .T. ) ; +#652 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 12.07106781186551100, -28.75000000000000000 ) ) ; +#653 = VERTEX_POINT ( 'NONE', #472 ) ; +#654 = AXIS2_PLACEMENT_3D ( 'NONE', #237, #233, #215 ) ; +#655 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#656 = ORIENTED_EDGE ( 'NONE', *, *, #1040, .T. ) ; +#657 = VECTOR ( 'NONE', #409, 1000.000000000000000 ) ; +#658 = VERTEX_POINT ( 'NONE', #561 ) ; +#659 = LINE ( 'NONE', #451, #657 ) ; +#660 = VERTEX_POINT ( 'NONE', #474 ) ; +#661 = LINE ( 'NONE', #340, #635 ) ; +#662 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#663 = EDGE_CURVE ( 'NONE', #211, #1543, #1406, .T. ) ; +#664 = CARTESIAN_POINT ( 'NONE', ( -0.001050000000008200200, 13.57460947032089400, -34.25000000000000000 ) ) ; +#665 = AXIS2_PLACEMENT_3D ( 'NONE', #111, #100, #96 ) ; +#666 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.3944487245360096500, 0.9189179526551405400 ) ) ; +#667 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9189179526551406500, -0.3944487245360096500 ) ) ; +#668 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -24.80277563773198700, 9.368439310809765900 ) ) ; +#669 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#670 = EDGE_LOOP ( 'NONE', ( #595, #937, #1311, #287 ) ) ; +#671 = FACE_OUTER_BOUND ( 'NONE', #1501, .T. ) ; +#672 = ORIENTED_EDGE ( 'NONE', *, *, #784, .F. ) ; +#673 = CIRCLE ( 'NONE', #738, 0.5000000000000004400 ) ; +#674 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999999400, 10.00000000000000000, 4.999999999999998200 ) ) ; +#675 = ORIENTED_EDGE ( 'NONE', *, *, #1513, .T. ) ; +#676 = LINE ( 'NONE', #532, #694 ) ; +#677 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 2.500000000000000000, 13.00000000000000000 ) ) ; +#678 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -5.650706642057635100, 15.00000000000000000 ) ) ; +#679 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 0.5000000000000001100, 4.034240641806529900E-018 ) ) ; +#680 = EDGE_CURVE ( 'NONE', #193, #385, #1408, .T. ) ; +#681 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#682 = AXIS2_PLACEMENT_3D ( 'NONE', #399, #353, #348 ) ; +#683 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -10.09962527885180500, 11.60806680872136800 ) ) ; +#684 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#685 = DIRECTION ( 'NONE', ( 1.734723475976806800E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#686 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -8.412502425547028700, 10.27080130347494900 ) ) ; +#687 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -9.505456136875945800, 11.95865453061662500 ) ) ; +#688 = ORIENTED_EDGE ( 'NONE', *, *, #1283, .T. ) ; +#689 = CARTESIAN_POINT ( 'NONE', ( -0.001050000000008308600, 14.07460947032089600, -34.25000000000000000 ) ) ; +#690 = EDGE_CURVE ( 'NONE', #420, #88, #1389, .T. ) ; +#691 = ORIENTED_EDGE ( 'NONE', *, *, #1431, .F. ) ; +#692 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.734723475976808300E-016 ) ) ; +#693 = ORIENTED_EDGE ( 'NONE', *, *, #1183, .T. ) ; +#694 = VECTOR ( 'NONE', #495, 1000.000000000000000 ) ; +#695 = AXIS2_PLACEMENT_3D ( 'NONE', #273, #258, #253 ) ; +#696 = ORIENTED_EDGE ( 'NONE', *, *, #1395, .F. ) ; +#697 = VECTOR ( 'NONE', #521, 1000.000000000000000 ) ; +#698 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000005000, 7.500000000000000000, -24.17893218813454200 ) ) ; +#699 = DIRECTION ( 'NONE', ( 1.734723475976808300E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#700 = EDGE_LOOP ( 'NONE', ( #264, #526, #1247, #1562, #656, #1004 ) ) ; +#701 = LINE ( 'NONE', #558, #697 ) ; +#702 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 12.07106781186551100, -28.75000000000000000 ) ) ; +#703 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.961041562930649500, 11.53203807056100600 ) ) ; +#704 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.734723475976808300E-016 ) ) ; +#705 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 2.500000000000000400, -38.75000000000000000 ) ) ; +#706 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#707 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000002300, 15.00000000000000200, -38.75000000000000000 ) ) ; +#708 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#709 = ORIENTED_EDGE ( 'NONE', *, *, #690, .T. ) ; +#710 = ORIENTED_EDGE ( 'NONE', *, *, #624, .F. ) ; +#711 = VECTOR ( 'NONE', #543, 1000.000000000000000 ) ; +#712 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#713 = EDGE_CURVE ( 'NONE', #122, #934, #1420, .T. ) ; +#714 = ORIENTED_EDGE ( 'NONE', *, *, #454, .F. ) ; +#715 = VECTOR ( 'NONE', #568, 1000.000000000000000 ) ; +#716 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.168404344971010300E-016, -0.0000000000000000000 ) ) ; +#717 = EDGE_LOOP ( 'NONE', ( #637, #1115, #282, #90 ) ) ; +#718 = LINE ( 'NONE', #519, #711 ) ; +#719 = AXIS2_PLACEMENT_3D ( 'NONE', #679, #633, #646 ) ; +#720 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -24.99999999999999300, 8.908980334482196300 ) ) ; +#721 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 15.00000000000000200, -33.75000000000000000 ) ) ; +#722 = EDGE_CURVE ( 'NONE', #1567, #815, #1386, .T. ) ; +#723 = DIRECTION ( 'NONE', ( -6.133173666733469400E-017, 0.7071067811865511300, -0.7071067811865440200 ) ) ; +#724 = EDGE_CURVE ( 'NONE', #176, #363, #1410, .T. ) ; +#725 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 13.00000000000000000 ) ) ; +#726 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002800, 13.57460947032089400, -33.75000000000000000 ) ) ; +#727 = ORIENTED_EDGE ( 'NONE', *, *, #1507, .T. ) ; +#728 = ORIENTED_EDGE ( 'NONE', *, *, #900, .F. ) ; +#729 = ORIENTED_EDGE ( 'NONE', *, *, #1030, .F. ) ; +#730 = VECTOR ( 'NONE', #582, 1000.000000000000000 ) ; +#731 = ADVANCED_FACE ( 'NONE', ( #1353 ), #393, .F. ) ; +#732 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 8.068481283613056700E-018, -1.000000000000000000 ) ) ; +#733 = ORIENTED_EDGE ( 'NONE', *, *, #471, .F. ) ; +#734 = CIRCLE ( 'NONE', #765, 2.500000000000000400 ) ; +#735 = EDGE_CURVE ( 'NONE', #1325, #400, #1350, .T. ) ; +#736 = ORIENTED_EDGE ( 'NONE', *, *, #1399, .T. ) ; +#737 = CYLINDRICAL_SURFACE ( 'NONE', #719, 2.000000000000000000 ) ; +#738 = AXIS2_PLACEMENT_3D ( 'NONE', #431, #423, #415 ) ; +#739 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.500000000000000000, 4.999999999999999100 ) ) ; +#740 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#741 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000001900, 15.00000000000005000, -38.74999999999995000 ) ) ; +#742 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#743 = EDGE_CURVE ( 'NONE', #308, #88, #1372, .T. ) ; +#744 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 2.500000000000000400, -38.75000000000000000 ) ) ; +#745 = AXIS2_PLACEMENT_3D ( 'NONE', #720, #684, #655 ) ; +#746 = DIRECTION ( 'NONE', ( 1.734723475976806800E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#747 = ADVANCED_FACE ( 'NONE', ( #1329 ), #1316, .T. ) ; +#748 = ORIENTED_EDGE ( 'NONE', *, *, #1487, .T. ) ; +#749 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -1.734723475976808300E-016 ) ) ; +#750 = ORIENTED_EDGE ( 'NONE', *, *, #877, .T. ) ; +#751 = LINE ( 'NONE', #627, #730 ) ; +#752 = DIRECTION ( 'NONE', ( -8.673617379884034200E-017, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#753 = ORIENTED_EDGE ( 'NONE', *, *, #644, .F. ) ; +#754 = VECTOR ( 'NONE', #597, 1000.000000000000000 ) ; +#755 = EDGE_CURVE ( 'NONE', #105, #262, #1368, .T. ) ; +#756 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000004100, 5.242189406417884000, -28.74999999999999600 ) ) ; +#757 = VERTEX_POINT ( 'NONE', #357 ) ; +#758 = LINE ( 'NONE', #606, #754 ) ; +#759 = AXIS2_PLACEMENT_3D ( 'NONE', #707, #704, #699 ) ; +#760 = PLANE ( 'NONE', #759 ) ; +#761 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#762 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 10.00000000000000000, 2.499999999999998700 ) ) ; +#763 = EDGE_CURVE ( 'NONE', #934, #482, #1312, .T. ) ; +#764 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 12.07106781186551100, -33.75000000000000000 ) ) ; +#765 = AXIS2_PLACEMENT_3D ( 'NONE', #377, #367, #360 ) ; +#766 = ORIENTED_EDGE ( 'NONE', *, *, #735, .F. ) ; +#767 = VERTEX_POINT ( 'NONE', #631 ) ; +#768 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 2.500000000000000000, 12.49999999999999800 ) ) ; +#769 = ORIENTED_EDGE ( 'NONE', *, *, #1369, .F. ) ; +#770 = LINE ( 'NONE', #689, #715 ) ; +#771 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#772 = EDGE_LOOP ( 'NONE', ( #1483, #615, #953, #1639, #573 ) ) ; +#773 = FACE_OUTER_BOUND ( 'NONE', #621, .T. ) ; +#774 = ORIENTED_EDGE ( 'NONE', *, *, #548, .F. ) ; +#775 = LINE ( 'NONE', #674, #792 ) ; +#776 = EDGE_CURVE ( 'NONE', #934, #653, #1326, .T. ) ; +#777 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -1.734723475976808300E-016 ) ) ; +#778 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 13.57460947032089600, -34.25000000000000000 ) ) ; +#779 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, 8.673617379884041600E-017 ) ) ; +#780 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -27.50000000000000000, 0.0000000000000000000 ) ) ; +#781 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#782 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -5.650706642057635100, 15.00000000000000000 ) ) ; +#783 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#784 = EDGE_CURVE ( 'NONE', #1403, #1622, #1295, .T. ) ; +#785 = VERTEX_POINT ( 'NONE', #336 ) ; +#786 = ORIENTED_EDGE ( 'NONE', *, *, #564, .F. ) ; +#787 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002800, 5.242189406417883100, -28.74999999999999600 ) ) ; +#788 = ORIENTED_EDGE ( 'NONE', *, *, #1592, .F. ) ; +#789 = FACE_OUTER_BOUND ( 'NONE', #1440, .T. ) ; +#790 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#791 = ORIENTED_EDGE ( 'NONE', *, *, #663, .F. ) ; +#792 = VECTOR ( 'NONE', #669, 1000.000000000000000 ) ; +#793 = ORIENTED_EDGE ( 'NONE', *, *, #1431, .T. ) ; +#794 = FACE_OUTER_BOUND ( 'NONE', #1659, .T. ) ; +#795 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#796 = EDGE_CURVE ( 'NONE', #634, #757, #1348, .T. ) ; +#797 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -5.650706642057635100, 12.99999999999999800 ) ) ; +#798 = AXIS2_PLACEMENT_3D ( 'NONE', #835, #822, #818 ) ; +#799 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#800 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#801 = DIRECTION ( 'NONE', ( -8.673617379884034200E-017, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#802 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#803 = EDGE_CURVE ( 'NONE', #363, #850, #1221, .T. ) ; +#804 = ORIENTED_EDGE ( 'NONE', *, *, #333, .T. ) ; +#805 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -8.673617379884041600E-017 ) ) ; +#806 = EDGE_CURVE ( 'NONE', #385, #1325, #1273, .T. ) ; +#807 = ORIENTED_EDGE ( 'NONE', *, *, #525, .T. ) ; +#808 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002800, 7.500000000000000000, -24.17893218813454200 ) ) ; +#809 = ORIENTED_EDGE ( 'NONE', *, *, #1507, .F. ) ; +#810 = VECTOR ( 'NONE', #740, 1000.000000000000000 ) ; +#811 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002800, 3.964466094067281800, -27.71446609406729400 ) ) ; +#812 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 0.0000000000000000000, 15.00000000000000000 ) ) ; +#813 = EDGE_LOOP ( 'NONE', ( #613, #952, #1638, #1362 ) ) ; +#814 = LINE ( 'NONE', #762, #810 ) ; +#815 = VERTEX_POINT ( 'NONE', #205 ) ; +#816 = TOROIDAL_SURFACE ( 'NONE', #745, 0.5000000000000000000, 2.000000000000000000 ) ; +#817 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -25.50000000000000400, 4.999999999999999100 ) ) ; +#818 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.8790852989652076000, 0.4766644911709406200 ) ) ; +#819 = EDGE_CURVE ( 'NONE', #829, #1254, #1315, .T. ) ; +#820 = AXIS2_PLACEMENT_3D ( 'NONE', #1155, #1153, #1145 ) ; +#821 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.50000000000000400, 4.999999999999999100 ) ) ; +#822 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.4766644911709406700, 0.8790852989652077100 ) ) ; +#823 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -2.500000000000000000, -38.75000000000000000 ) ) ; +#824 = ORIENTED_EDGE ( 'NONE', *, *, #680, .F. ) ; +#825 = EDGE_CURVE ( 'NONE', #1010, #122, #1269, .T. ) ; +#826 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 2.500000000000000000, 15.00000000000000000 ) ) ; +#827 = ORIENTED_EDGE ( 'NONE', *, *, #724, .T. ) ; +#828 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.168404344971010300E-016, 0.0000000000000000000 ) ) ; +#829 = VERTEX_POINT ( 'NONE', #203 ) ; +#830 = VECTOR ( 'NONE', #800, 1000.000000000000000 ) ; +#831 = AXIS2_PLACEMENT_3D ( 'NONE', #1606, #189, #33 ) ; +#832 = VERTEX_POINT ( 'NONE', #207 ) ; +#833 = VECTOR ( 'NONE', #732, 1000.000000000000000 ) ; +#834 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.168404344971010300E-016, 0.0000000000000000000 ) ) ; +#835 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -6.090249291540239100, 12.73833224558546600 ) ) ; +#836 = ORIENTED_EDGE ( 'NONE', *, *, #1051, .F. ) ; +#837 = VECTOR ( 'NONE', #802, 1000.000000000000000 ) ; +#838 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -8.068481283613056700E-018, 1.000000000000000000 ) ) ; +#839 = ADVANCED_FACE ( 'NONE', ( #1255 ), #212, .F. ) ; +#840 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#841 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -25.50000000000000400, 0.0000000000000000000 ) ) ; +#842 = EDGE_CURVE ( 'NONE', #1066, #1472, #1293, .T. ) ; +#843 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -11.91503992045365500, 8.751661752685025800 ) ) ; +#844 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#845 = EDGE_CURVE ( 'NONE', #757, #660, #1250, .T. ) ; +#846 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000001900, 5.242189406417883100, -38.75000000000000000 ) ) ; +#847 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 14.07460947032089600, -34.25000000000000000 ) ) ; +#848 = ORIENTED_EDGE ( 'NONE', *, *, #845, .F. ) ; +#849 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -7.848419889470654300, 13.69166122792734800 ) ) ; +#850 = VERTEX_POINT ( 'NONE', #146 ) ; +#851 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.168404344971010100E-016, 1.173774534824853400E-032 ) ) ; +#852 = EDGE_CURVE ( 'NONE', #97, #501, #1248, .T. ) ; +#853 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 14.07460947032089700, -34.25000000000000000 ) ) ; +#854 = ORIENTED_EDGE ( 'NONE', *, *, #650, .F. ) ; +#855 = LINE ( 'NONE', #1136, #830 ) ; +#856 = EDGE_LOOP ( 'NONE', ( #481, #1160, #827, #469 ) ) ; +#857 = CIRCLE ( 'NONE', #798, 2.000000000000000000 ) ; +#858 = AXIS2_PLACEMENT_3D ( 'NONE', #1279, #1275, #1266 ) ; +#859 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#860 = VECTOR ( 'NONE', #1225, 1000.000000000000000 ) ; +#861 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 12.07106781186551100, -33.75000000000000000 ) ) ; +#862 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#863 = EDGE_CURVE ( 'NONE', #767, #501, #1265, .T. ) ; +#864 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 10.00000000000000000, 2.499999999999998700 ) ) ; +#865 = AXIS2_PLACEMENT_3D ( 'NONE', #1214, #1202, #1195 ) ; +#866 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999999400, 2.500000000000000000, 9.999999999999998200 ) ) ; +#867 = ADVANCED_FACE ( 'NONE', ( #1204 ), #1186, .T. ) ; +#868 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.5000000000000001100, 4.034240641806529900E-018 ) ) ; +#869 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#870 = EDGE_LOOP ( 'NONE', ( #804, #1177, #154, #1509, #1219 ) ) ; +#871 = EDGE_LOOP ( 'NONE', ( #1528, #1120, #753, #448 ) ) ; +#872 = VERTEX_POINT ( 'NONE', #109 ) ; +#873 = LINE ( 'NONE', #812, #837 ) ; +#874 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 2.500000000000000000, 2.499999999999998700 ) ) ; +#875 = ORIENTED_EDGE ( 'NONE', *, *, #755, .F. ) ; +#876 = LINE ( 'NONE', #868, #833 ) ; +#877 = EDGE_CURVE ( 'NONE', #1010, #363, #1227, .T. ) ; +#878 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#879 = ORIENTED_EDGE ( 'NONE', *, *, #842, .T. ) ; +#880 = VECTOR ( 'NONE', #1187, 1000.000000000000000 ) ; +#881 = ADVANCED_FACE ( 'NONE', ( #1207 ), #1198, .F. ) ; +#882 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#883 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -5.650706642057635100, 12.49999999999999600 ) ) ; +#884 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#885 = EDGE_CURVE ( 'NONE', #479, #1052, #1165, .T. ) ; +#886 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#887 = AXIS2_PLACEMENT_3D ( 'NONE', #108, #89, #1392 ) ; +#888 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 10.00000000000000000, 9.999999999999998200 ) ) ; +#889 = ORIENTED_EDGE ( 'NONE', *, *, #1108, .T. ) ; +#890 = VERTEX_POINT ( 'NONE', #65 ) ; +#891 = TOROIDAL_SURFACE ( 'NONE', #25, 0.5000000000000000000, 2.000000000000000000 ) ; +#892 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 2.500000000000000000, 9.999999999999998200 ) ) ; +#893 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 2.500000000000000400, -38.75000000000000000 ) ) ; +#894 = ORIENTED_EDGE ( 'NONE', *, *, #1183, .F. ) ; +#895 = CIRCLE ( 'NONE', #820, 2.500000000000000400 ) ; +#896 = EDGE_CURVE ( 'NONE', #482, #1601, #1150, .T. ) ; +#897 = EDGE_LOOP ( 'NONE', ( #1028, #36, #1203, #714 ) ) ; +#898 = LINE ( 'NONE', #1191, #880 ) ; +#899 = VECTOR ( 'NONE', #1244, 1000.000000000000000 ) ; +#900 = EDGE_CURVE ( 'NONE', #427, #211, #1168, .T. ) ; +#901 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -24.01387818865996900, 11.20627521612004800 ) ) ; +#902 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#903 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#904 = EDGE_CURVE ( 'NONE', #304, #634, #1143, .T. ) ; +#905 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 0.0000000000000000000, 12.49999999999999800 ) ) ; +#906 = AXIS2_PLACEMENT_3D ( 'NONE', #461, #263, #192 ) ; +#907 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -24.80277563773198700, 9.368439310809765900 ) ) ; +#908 = EDGE_LOOP ( 'NONE', ( #727, #1433, #86, #118 ) ) ; +#909 = ORIENTED_EDGE ( 'NONE', *, *, #1538, .F. ) ; +#910 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#911 = VERTEX_POINT ( 'NONE', #59 ) ; +#912 = CIRCLE ( 'NONE', #858, 2.499999999999999600 ) ; +#913 = ORIENTED_EDGE ( 'NONE', *, *, #630, .F. ) ; +#914 = FACE_OUTER_BOUND ( 'NONE', #1197, .T. ) ; +#915 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#916 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -24.01674353581403000, 9.031032299498216200 ) ) ; +#917 = EDGE_LOOP ( 'NONE', ( #982, #1657, #672, #1388 ) ) ; +#918 = VECTOR ( 'NONE', #1330, 1000.000000000000000 ) ; +#919 = EDGE_CURVE ( 'NONE', #767, #385, #1163, .T. ) ; +#920 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 2.500000000000000000, 12.49999999999999800 ) ) ; +#921 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#922 = AXIS2_PLACEMENT_3D ( 'NONE', #787, #779, #752 ) ; +#923 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#924 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000002300, -23.20324252833486200, 8.770058588345319700 ) ) ; +#925 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -24.99999999999999300, 8.908980334482196300 ) ) ; +#926 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #583, #578, #560, #557, #551, #545, #544, #542, #540, #536, #535, #520, #518, #513, #508, #502, #499, #496, #492, #487, #484, #476 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001090507580220440200, 0.002181015160440880300, 0.003271522740661320700, 0.004362030320881760600, 0.006543045481322645700, 0.008724060641763531700, 0.01090507580220441800, 0.01308609096264530000, 0.01526710612308618600, 0.01744812128352707000 ), + .UNSPECIFIED. ) ; +#927 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000004100, -21.54510234311413400, 8.364007777193785700 ) ) ; +#928 = ADVANCED_FACE ( 'NONE', ( #1121 ), #28, .T. ) ; +#929 = EDGE_CURVE ( 'NONE', #785, #1139, #1093, .T. ) ; +#930 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -24.80277563773198700, 9.368439310809765900 ) ) ; +#931 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 2.500000000000000400, -38.75000000000000000 ) ) ; +#932 = ORIENTED_EDGE ( 'NONE', *, *, #1476, .F. ) ; +#933 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000002300, -20.71176587879800500, 8.221972889820746000 ) ) ; +#934 = VERTEX_POINT ( 'NONE', #1444 ) ; +#935 = VECTOR ( 'NONE', #505, 1000.000000000000000 ) ; +#936 = DIRECTION ( 'NONE', ( -2.168404344971006900E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#937 = ORIENTED_EDGE ( 'NONE', *, *, #1302, .F. ) ; +#938 = LINE ( 'NONE', #1174, #860 ) ; +#939 = ORIENTED_EDGE ( 'NONE', *, *, #885, .T. ) ; +#940 = LINE ( 'NONE', #1320, #918 ) ; +#941 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -8.673617379884041600E-017 ) ) ; +#942 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -19.03814334693832000, 8.037252147783988200 ) ) ; +#943 = CIRCLE ( 'NONE', #887, 2.500000000000000400 ) ; +#944 = EDGE_CURVE ( 'NONE', #482, #660, #1098, .T. ) ; +#945 = AXIS2_PLACEMENT_3D ( 'NONE', #1023, #995, #985 ) ; +#946 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -24.99999999999999300, 11.40898033448219600 ) ) ; +#947 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 8.535533905932791000, -32.28553390593275900 ) ) ; +#948 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000004100, -18.19783459398329100, 7.994890595618255000 ) ) ; +#949 = EDGE_CURVE ( 'NONE', #1472, #120, #1091, .T. ) ; +#950 = ORIENTED_EDGE ( 'NONE', *, *, #1283, .F. ) ; +#951 = AXIS2_PLACEMENT_3D ( 'NONE', #1211, #1490, #1132 ) ; +#952 = ORIENTED_EDGE ( 'NONE', *, *, #1080, .T. ) ; +#953 = ORIENTED_EDGE ( 'NONE', *, *, #1228, .F. ) ; +#954 = VECTOR ( 'NONE', #851, 1000.000000000000000 ) ; +#955 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000002300, -16.93233976002696700, 8.003279708770852700 ) ) ; +#956 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 0.5000000000000000000, 15.00000000000000000 ) ) ; +#957 = ORIENTED_EDGE ( 'NONE', *, *, #1108, .F. ) ; +#958 = LINE ( 'NONE', #147, #935 ) ; +#959 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -24.01387818865996600, 11.20627521612004800 ) ) ; +#960 = ORIENTED_EDGE ( 'NONE', *, *, #825, .T. ) ; +#961 = CIRCLE ( 'NONE', #922, 10.00000000000000200 ) ; +#962 = CARTESIAN_POINT ( 'NONE', ( 1.301042606982605300E-015, -24.01387818865996600, 11.20627521612004400 ) ) ; +#963 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -16.50966165280715700, 8.018177281315875100 ) ) ; +#964 = EDGE_CURVE ( 'NONE', #1580, #97, #1116, .T. ) ; +#965 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -24.80277563773198300, 9.368439310809765900 ) ) ; +#966 = ADVANCED_FACE ( 'NONE', ( #1067 ), #1, .T. ) ; +#967 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -23.34718519476548700, 10.92009493164642100 ) ) ; +#968 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -11.51034736436576400, 8.874305262466936700 ) ) ; +#969 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999998800, -15.66255172105539600, 8.073042939484880200 ) ) ; +#970 = CARTESIAN_POINT ( 'NONE', ( 5.571074213397153500E-013, -23.34718519389448600, 10.92009493346303700 ) ) ; +#971 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -24.01793225539219300, 9.031542565268551900 ) ) ; +#972 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -22.63442504634681600, 10.68985947019709200 ) ) ; +#973 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -8.412502427677703000, 10.27080130694119800 ) ) ; +#974 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -15.23688826215463100, 8.113205315711200100 ) ) ; +#975 = EDGE_CURVE ( 'NONE', #1222, #304, #17, .T. ) ; +#976 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -22.63442504618632600, 10.68985947085248100 ) ) ; +#977 = ORIENTED_EDGE ( 'NONE', *, *, #500, .T. ) ; +#978 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -23.20324252826955600, 8.770058589296631600 ) ) ; +#979 = ORIENTED_EDGE ( 'NONE', *, *, #500, .F. ) ; +#980 = VECTOR ( 'NONE', #1107, 1000.000000000000000 ) ; +#981 = AXIS2_PLACEMENT_3D ( 'NONE', #1428, #1520, #1379 ) ; +#982 = ORIENTED_EDGE ( 'NONE', *, *, #722, .T. ) ; +#983 = CIRCLE ( 'NONE', #906, 0.5000000000000004400 ) ; +#984 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -21.16249870373122700, 10.32940931604150900 ) ) ; +#985 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#986 = EDGE_LOOP ( 'NONE', ( #957, #127, #1262, #1286 ) ) ; +#987 = LINE ( 'NONE', #1253, #954 ) ; +#988 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -8.068481283613056700E-018, 1.000000000000000000 ) ) ; +#989 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -24.99999999999999300, 8.908980334482196300 ) ) ; +#990 = EDGE_CURVE ( 'NONE', #120, #501, #1072, .T. ) ; +#991 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999998800, -13.97138778022312900, 8.272114272004451200 ) ) ; +#992 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -21.16249870389172100, 10.32940931538612300 ) ) ; +#993 = EDGE_CURVE ( 'NONE', #1622, #815, #1053, .T. ) ; +#994 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -21.54510234317944400, 8.364007776242473800 ) ) ; +#995 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#996 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -20.41252044606545000, 10.20108969088206800 ) ) ; +#997 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, 8.673617379884041600E-017 ) ) ; +#998 = VERTEX_POINT ( 'NONE', #1561 ) ; +#999 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -20.41252044604024700, 10.20108969111040100 ) ) ; +#1000 = ORIENTED_EDGE ( 'NONE', *, *, #1073, .F. ) ; +#1001 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999997000, -13.14012574021799100, 8.428476755116751200 ) ) ; +#1002 = EDGE_CURVE ( 'NONE', #501, #1066, #1033, .T. ) ; +#1003 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1004 = ORIENTED_EDGE ( 'NONE', *, *, #1015, .T. ) ; +#1005 = CIRCLE ( 'NONE', #945, 2.500000000000000400 ) ; +#1006 = ORIENTED_EDGE ( 'NONE', *, *, #877, .F. ) ; +#1007 = LINE ( 'NONE', #1355, #980 ) ; +#1008 = AXIS2_PLACEMENT_3D ( 'NONE', #1343, #1339, #1335 ) ; +#1009 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -20.71176587877599200, 8.221972890131636900 ) ) ; +#1010 = VERTEX_POINT ( 'NONE', #1424 ) ; +#1011 = CIRCLE ( 'NONE', #1008, 0.5000000000000004400 ) ; +#1012 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999998800, -11.91503992045365500, 8.751661752685022200 ) ) ; +#1013 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -18.89856631673351800, 10.03399183885383600 ) ) ; +#1014 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -18.89856631675872100, 10.03399183862550400 ) ) ; +#1015 = EDGE_CURVE ( 'NONE', #658, #363, #1050, .T. ) ; +#1016 = ADVANCED_FACE ( 'NONE', ( #1026 ), #1035, .T. ) ; +#1017 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 0.0000000000000000000, 15.00000000000000000 ) ) ; +#1018 = AXIS2_PLACEMENT_3D ( 'NONE', #1404, #1398, #1396 ) ; +#1019 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -11.51034736436577100, 8.874305262466938500 ) ) ; +#1020 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -27.50000000000000000, 4.999999999999999100 ) ) ; +#1021 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1022 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1023 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -24.99999999999999300, 8.908980334482196300 ) ) ; +#1024 = ORIENTED_EDGE ( 'NONE', *, *, #713, .T. ) ; +#1025 = EDGE_CURVE ( 'NONE', #1407, #872, #1011, .T. ) ; +#1026 = FACE_OUTER_BOUND ( 'NONE', #570, .T. ) ; +#1027 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -19.03814334696033200, 8.037252147473093800 ) ) ; +#1028 = ORIENTED_EDGE ( 'NONE', *, *, #1579, .F. ) ; +#1029 = VECTOR ( 'NONE', #1430, 1000.000000000000000 ) ; +#1030 = EDGE_CURVE ( 'NONE', #757, #458, #21, .T. ) ; +#1031 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -18.13438209179736300, 9.995355174378627100 ) ) ; +#1032 = EDGE_LOOP ( 'NONE', ( #157, #854, #1224, #197 ) ) ; +#1033 = LINE ( 'NONE', #1470, #1029 ) ; +#1034 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999999800, 10.00000000000000000, 9.999999999999998200 ) ) ; +#1035 = TOROIDAL_SURFACE ( 'NONE', #981, 0.5000000000000000000, 2.000000000000000000 ) ; +#1036 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1037 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -18.13438209179688300, 9.995355174306439500 ) ) ; +#1038 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000002300, -10.70949422079413600, 9.154272716096494700 ) ) ; +#1039 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -18.19783459398828600, 7.994890595535682800 ) ) ; +#1040 = EDGE_CURVE ( 'NONE', #653, #658, #1005, .T. ) ; +#1041 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -16.98395292476742900, 10.00298150377745200 ) ) ; +#1042 = AXIS2_PLACEMENT_3D ( 'NONE', #1466, #1460, #1451 ) ; +#1043 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1044 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -16.98395292476766700, 10.00298150381354600 ) ) ; +#1045 = ORIENTED_EDGE ( 'NONE', *, *, #735, .T. ) ; +#1046 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1047 = ORIENTED_EDGE ( 'NONE', *, *, #608, .T. ) ; +#1048 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -10.31164176175997600, 9.312325625971691800 ) ) ; +#1049 = ORIENTED_EDGE ( 'NONE', *, *, #1323, .F. ) ; +#1050 = CIRCLE ( 'NONE', #1018, 2.500000000000000400 ) ; +#1051 = EDGE_CURVE ( 'NONE', #1066, #329, #1007, .T. ) ; +#1052 = VERTEX_POINT ( 'NONE', #1321 ) ; +#1053 = CIRCLE ( 'NONE', #1042, 2.500000000000000400 ) ; +#1054 = ORIENTED_EDGE ( 'NONE', *, *, #1522, .T. ) ; +#1055 = VECTOR ( 'NONE', #1649, 1000.000000000000000 ) ; +#1056 = AXIS2_PLACEMENT_3D ( 'NONE', #1506, #1504, #1495 ) ; +#1057 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -16.93233976002446200, 8.003279708812137000 ) ) ; +#1058 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -9.146021867520103000, 9.844898011812244200 ) ) ; +#1059 = PLANE ( 'NONE', #290 ) ; +#1060 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999998800, -8.412502427677699400, 10.27080130694119300 ) ) ; +#1061 = AXIS2_PLACEMENT_3D ( 'NONE', #1636, #1632, #1612 ) ; +#1062 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -16.59976296163652900, 10.01653210543602200 ) ) ; +#1063 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999997000, -7.580573099881788400, 10.94139169563724300 ) ) ; +#1064 = ORIENTED_EDGE ( 'NONE', *, *, #743, .F. ) ; +#1065 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -16.59976296162923500, 10.01653210532344800 ) ) ; +#1066 = VERTEX_POINT ( 'NONE', #893 ) ; +#1067 = FACE_OUTER_BOUND ( 'NONE', #267, .T. ) ; +#1068 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -16.50966165281864300, 8.018177281174633500 ) ) ; +#1069 = VERTEX_POINT ( 'NONE', #861 ) ; +#1070 = VECTOR ( 'NONE', #1521, 1000.000000000000000 ) ; +#1071 = ORIENTED_EDGE ( 'NONE', *, *, #763, .T. ) ; +#1072 = CIRCLE ( 'NONE', #1056, 2.000000000000000000 ) ; +#1073 = EDGE_CURVE ( 'NONE', #308, #427, #961, .T. ) ; +#1074 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -15.83098092369486100, 10.06632461868510500 ) ) ; +#1075 = AXIS2_PLACEMENT_3D ( 'NONE', #1555, #1552, #1540 ) ; +#1076 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.44527532635886900, 10.10274430803851900 ) ) ; +#1077 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999997000, -7.417960658116681000, 11.08331309741161300 ) ) ; +#1078 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.23688826213086100, 8.113205315612550100 ) ) ; +#1079 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999998800, -7.108454269819223000, 11.37847331706463000 ) ) ; +#1080 = EDGE_CURVE ( 'NONE', #88, #1164, #987, .T. ) ; +#1081 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -14.30216336995512800, 10.24628493136422900 ) ) ; +#1082 = EDGE_CURVE ( 'NONE', #1567, #1403, #983, .T. ) ; +#1083 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -14.30216336997016800, 10.24628493148400400 ) ) ; +#1084 = VERTEX_POINT ( 'NONE', #538 ) ; +#1085 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 13.57460947032089400, -34.25000000000000000 ) ) ; +#1086 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -6.961041562930645900, 11.53203807056100200 ) ) ; +#1087 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -13.97138778027066100, 8.272114272201745800 ) ) ; +#1088 = ORIENTED_EDGE ( 'NONE', *, *, #1040, .F. ) ; +#1089 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -13.55590000447634000, 10.38721618314635900 ) ) ; +#1090 = ORIENTED_EDGE ( 'NONE', *, *, #1100, .T. ) ; +#1091 = LINE ( 'NONE', #436, #1070 ) ; +#1092 = ORIENTED_EDGE ( 'NONE', *, *, #1193, .F. ) ; +#1093 = LINE ( 'NONE', #1034, #1124 ) ; +#1094 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 13.88695699409810700, -34.64043440472151800 ) ) ; +#1095 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1096 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999998800, -6.542980537723935600, 12.01244373387206300 ) ) ; +#1097 = ORIENTED_EDGE ( 'NONE', *, *, #900, .T. ) ; +#1098 = CIRCLE ( 'NONE', #1112, 2.000000000000000000 ) ; +#1099 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -13.55590000434238200, 10.38721618263855700 ) ) ; +#1100 = EDGE_CURVE ( 'NONE', #850, #1580, #943, .T. ) ; +#1101 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -13.14012574002762100, 8.428476754344176300 ) ) ; +#1102 = AXIS2_PLACEMENT_3D ( 'NONE', #55, #1588, #1486 ) ; +#1103 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -12.47239079976528900, 10.67305241930253400 ) ) ; +#1104 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -12.47239079983227100, 10.67305241955643600 ) ) ; +#1105 = PLANE ( 'NONE', #354 ) ; +#1106 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 5.242189406417884900, -38.75000000000000000 ) ) ; +#1107 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1108 = EDGE_CURVE ( 'NONE', #529, #1601, #958, .T. ) ; +#1109 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -11.91503992054884300, 8.751661753071312300 ) ) ; +#1110 = ADVANCED_FACE ( 'NONE', ( #914 ), #24, .T. ) ; +#1111 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -12.11727336398061500, 10.78082108094054400 ) ) ; +#1112 = AXIS2_PLACEMENT_3D ( 'NONE', #332, #135, #22 ) ; +#1113 = ORIENTED_EDGE ( 'NONE', *, *, #896, .T. ) ; +#1114 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -12.11727336384219100, 10.78082108054457000 ) ) ; +#1115 = ORIENTED_EDGE ( 'NONE', *, *, #1307, .T. ) ; +#1116 = LINE ( 'NONE', #1547, #1055 ) ; +#1117 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -9.146021867520103000, 9.844898011812242400 ) ) ; +#1118 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000002300, -6.296111700706345200, 12.35867187469665900 ) ) ; +#1119 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -11.51034736420913500, 8.874305261825163900 ) ) ; +#1120 = ORIENTED_EDGE ( 'NONE', *, *, #852, .F. ) ; +#1121 = FACE_OUTER_BOUND ( 'NONE', #1185, .T. ) ; +#1122 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -11.42257890489154400, 11.02367689080143400 ) ) ; +#1123 = ORIENTED_EDGE ( 'NONE', *, *, #863, .T. ) ; +#1124 = VECTOR ( 'NONE', #228, 1000.000000000000000 ) ; +#1125 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -11.42257890502997100, 11.02367689119740700 ) ) ; +#1126 = EDGE_CURVE ( 'NONE', #850, #418, #940, .T. ) ; +#1127 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -7.580573099881788400, 10.94139169563724700 ) ) ; +#1128 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -6.090249291540239100, 12.73833224558546600 ) ) ; +#1129 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.70949422095073300, 9.154272716738274700 ) ) ; +#1130 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -11.08157245251802300, 11.15941459230580100 ) ) ; +#1131 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -11.08157245239237200, 11.15941459203079800 ) ) ; +#1132 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1133 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.31164176140694600, 9.312325625395416800 ) ) ; +#1134 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 13.00000000000000000 ) ) ; +#1135 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -10.09962527885180500, 11.60806680872136800 ) ) ; +#1136 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 15.00000000000000200, -33.75000000000000000 ) ) ; +#1137 = EDGE_CURVE ( 'NONE', #1254, #1084, #912, .T. ) ; +#1138 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.09962527910310600, 11.60806680927137800 ) ) ; +#1139 = VERTEX_POINT ( 'NONE', #1291 ) ; +#1140 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000004100, 3.964466094067281800, -27.71446609406729400 ) ) ; +#1141 = ORIENTED_EDGE ( 'NONE', *, *, #491, .T. ) ; +#1142 = ORIENTED_EDGE ( 'NONE', *, *, #1161, .F. ) ; +#1143 = CIRCLE ( 'NONE', #1231, 2.500000000000000400 ) ; +#1144 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.146021868226156900, 9.844898012964796100 ) ) ; +#1145 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1146 = EDGE_LOOP ( 'NONE', ( #592, #1306, #1617, #977 ) ) ; +#1147 = VECTOR ( 'NONE', #52, 1000.000000000000000 ) ; +#1148 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -9.505456137804841900, 11.95865453176900800 ) ) ; +#1149 = EDGE_LOOP ( 'NONE', ( #1607, #1644, #1285, #909, #523, #220, #736, #388, #60, #104, #136 ) ) ; +#1150 = LINE ( 'NONE', #103, #1147 ) ; +#1151 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.505456136875945800, 11.95865453061662500 ) ) ; +#1152 = EDGE_CURVE ( 'NONE', #1384, #1407, #34, .T. ) ; +#1153 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1154 = PLANE ( 'NONE', #322 ) ; +#1155 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -5.650706642057635100, 12.49999999999999600 ) ) ; +#1156 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999999800, 10.00000000000000000, 9.999999999999998200 ) ) ; +#1157 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.412502425547028700, 10.27080130347494900 ) ) ; +#1158 = ORIENTED_EDGE ( 'NONE', *, *, #1395, .T. ) ; +#1159 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -8.876261603485541900, 12.46582718843260200 ) ) ; +#1160 = ORIENTED_EDGE ( 'NONE', *, *, #650, .T. ) ; +#1161 = EDGE_CURVE ( 'NONE', #1324, #634, #37, .T. ) ; +#1162 = ORIENTED_EDGE ( 'NONE', *, *, #1592, .T. ) ; +#1163 = CIRCLE ( 'NONE', #1173, 2.499999999999998700 ) ; +#1164 = VERTEX_POINT ( 'NONE', #1536 ) ; +#1165 = LINE ( 'NONE', #64, #1182 ) ; +#1166 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.876261603717766800, 12.46582718872069900 ) ) ; +#1167 = ORIENTED_EDGE ( 'NONE', *, *, #30, .T. ) ; +#1168 = LINE ( 'NONE', #50, #1188 ) ; +#1169 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.580573100414459200, 10.94139169650380900 ) ) ; +#1170 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -24.99999999999999300, 9.408980334482196300 ) ) ; +#1171 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -8.755738599182807400, 12.57119687229602100 ) ) ; +#1172 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1173 = AXIS2_PLACEMENT_3D ( 'NONE', #1628, #1570, #1641 ) ; +#1174 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999999800, 10.00000000000000000, 4.999999999999998200 ) ) ; +#1175 = CARTESIAN_POINT ( 'NONE', ( -1.386751549588890800E-013, -8.755738599200000700, 12.57119687231405300 ) ) ; +#1176 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.417960657609972600, 11.08331309699880600 ) ) ; +#1177 = ORIENTED_EDGE ( 'NONE', *, *, #1411, .T. ) ; +#1178 = EDGE_CURVE ( 'NONE', #890, #329, #898, .T. ) ; +#1179 = ORIENTED_EDGE ( 'NONE', *, *, #608, .F. ) ; +#1180 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -8.531220038068918000, 12.78530860090714300 ) ) ; +#1181 = ORIENTED_EDGE ( 'NONE', *, *, #975, .F. ) ; +#1182 = VECTOR ( 'NONE', #61, 1000.000000000000000 ) ; +#1183 = EDGE_CURVE ( 'NONE', #1264, #418, #895, .T. ) ; +#1184 = CARTESIAN_POINT ( 'NONE', ( 1.395425166968774800E-013, -8.531220038051722900, 12.78530860088911500 ) ) ; +#1185 = EDGE_LOOP ( 'NONE', ( #960, #1024, #1071, #1113, #1167, #1226, #1245, #1349, #1461, #1514, #1559 ) ) ; +#1186 = CYLINDRICAL_SURFACE ( 'NONE', #1210, 2.500000000000000400 ) ; +#1187 = DIRECTION ( 'NONE', ( -1.734723475976808100E-016, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1188 = VECTOR ( 'NONE', #43, 1000.000000000000000 ) ; +#1189 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.108454270325933200, 11.37847331747744000 ) ) ; +#1190 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -8.426816143438403000, 12.89430977557623100 ) ) ; +#1191 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000002300, 2.500000000000000000, -38.75000000000000000 ) ) ; +#1192 = CARTESIAN_POINT ( 'NONE', ( 4.646453632810292300E-014, -8.426816143425954300, 12.89430977556574500 ) ) ; +#1193 = EDGE_CURVE ( 'NONE', #1084, #1479, #938, .T. ) ; +#1194 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.961041562251690400, 11.53203807000712700 ) ) ; +#1195 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1196 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1197 = EDGE_LOOP ( 'NONE', ( #1542, #416, #306, #1092 ) ) ; +#1198 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 1, ( + ( #106, #102 ), + ( #87, #84 ), + ( #82, #81 ), + ( #78, #77 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 1.000000000000000000), + ( 0.6891881468402241100, 0.6891881468402241100), + ( 0.6891881468402241100, 0.6891881468402241100), + ( 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1199 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -8.137585484784187500, 13.22667284709664100 ) ) ; +#1200 = ORIENTED_EDGE ( 'NONE', *, *, #1487, .F. ) ; +#1201 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.8790852989652076000, -0.4766644911709406200 ) ) ; +#1202 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1203 = ORIENTED_EDGE ( 'NONE', *, *, #784, .T. ) ; +#1204 = FACE_OUTER_BOUND ( 'NONE', #772, .T. ) ; +#1205 = EDGE_CURVE ( 'NONE', #872, #1010, #1610, .T. ) ; +#1206 = EDGE_LOOP ( 'NONE', ( #1162, #1565, #217, #1510 ) ) ; +#1207 = FACE_OUTER_BOUND ( 'NONE', #856, .T. ) ; +#1208 = ORIENTED_EDGE ( 'NONE', *, *, #1015, .F. ) ; +#1209 = VECTOR ( 'NONE', #130, 1000.000000000000000 ) ; +#1210 = AXIS2_PLACEMENT_3D ( 'NONE', #115, #156, #113 ) ; +#1211 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -25.50000000000000400, 4.999999999999999100 ) ) ; +#1212 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 10.00000000000000000, 9.999999999999998200 ) ) ; +#1213 = CARTESIAN_POINT ( 'NONE', ( -9.162803004922325200E-014, -8.137585484809081400, 13.22667284711761900 ) ) ; +#1214 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -25.50000000000000400, 8.908980334482196300 ) ) ; +#1215 = EDGE_CURVE ( 'NONE', #911, #418, #857, .T. ) ; +#1216 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 7.500000000000000000, -24.17893218813454200 ) ) ; +#1217 = AXIS2_PLACEMENT_3D ( 'NONE', #99, #98, #93 ) ; +#1218 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.542980539081853000, 12.01244373497981700 ) ) ; +#1219 = ORIENTED_EDGE ( 'NONE', *, *, #1434, .T. ) ; +#1220 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 12.07106781186551100, -33.75000000000000000 ) ) ; +#1221 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #317, #315, #286, #283, #279, #277, #275, #271, #266, #261, #259, #257, #255, #252, #251, #236, #234, #232, #230, #227, #222, #216 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002186061686054739900, 0.004372123372109479800, 0.006558185058164220200, 0.008744246744218959700, 0.01093030843027369800, 0.01311637011632844000, 0.01420940095935580700, 0.01530243180238317600, 0.01639546264541054400, 0.01748849348843791200 ), + .UNSPECIFIED. ) ; +#1222 = VERTEX_POINT ( 'NONE', #1170 ) ; +#1223 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -7.976654441113646900, 13.45516551394658200 ) ) ; +#1224 = ORIENTED_EDGE ( 'NONE', *, *, #1215, .F. ) ; +#1225 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1226 = ORIENTED_EDGE ( 'NONE', *, *, #630, .T. ) ; +#1227 = CIRCLE ( 'NONE', #1217, 2.000000000000000000 ) ; +#1228 = EDGE_CURVE ( 'NONE', #97, #815, #873, .T. ) ; +#1229 = ORIENTED_EDGE ( 'NONE', *, *, #539, .T. ) ; +#1230 = VECTOR ( 'NONE', #163, 1000.000000000000000 ) ; +#1231 = AXIS2_PLACEMENT_3D ( 'NONE', #18, #10, #2 ) ; +#1232 = PLANE ( 'NONE', #63 ) ; +#1233 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.296111700706345200, 12.35867187469666300 ) ) ; +#1234 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.7808688094430305000, -0.6246950475544240700 ) ) ; +#1235 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.848419889470653400, 13.69166122792734800 ) ) ; +#1236 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1237 = CARTESIAN_POINT ( 'NONE', ( -0.001050000000008200200, 13.57460947032089400, -34.25000000000000000 ) ) ; +#1238 = EDGE_CURVE ( 'NONE', #1436, #1069, #855, .T. ) ; +#1239 = CARTESIAN_POINT ( 'NONE', ( -0.001050000000008509400, 15.00000000000000200, -33.75000000000000000 ) ) ; +#1240 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000001900, 15.00000000000000200, -38.75000000000000000 ) ) ; +#1241 = AXIS2_PLACEMENT_3D ( 'NONE', #129, #124, #119 ) ; +#1242 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1243 = ORIENTED_EDGE ( 'NONE', *, *, #333, .F. ) ; +#1244 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1245 = ORIENTED_EDGE ( 'NONE', *, *, #949, .T. ) ; +#1246 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1247 = ORIENTED_EDGE ( 'NONE', *, *, #904, .T. ) ; +#1248 = CIRCLE ( 'NONE', #1241, 2.500000000000000400 ) ; +#1249 = ORIENTED_EDGE ( 'NONE', *, *, #564, .T. ) ; +#1250 = LINE ( 'NONE', #153, #1230 ) ; +#1251 = PLANE ( 'NONE', #381 ) ; +#1252 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.417960658116682800, 11.08331309741161300 ) ) ; +#1253 = CARTESIAN_POINT ( 'NONE', ( -0.001050000000008268100, 13.88695699409810700, -34.64043440472151800 ) ) ; +#1254 = VERTEX_POINT ( 'NONE', #864 ) ; +#1255 = FACE_OUTER_BOUND ( 'NONE', #1371, .T. ) ; +#1256 = DIRECTION ( 'NONE', ( 1.354591455398884800E-016, -0.6246950475544240700, 0.7808688094430305000 ) ) ; +#1257 = AXIS2_PLACEMENT_3D ( 'NONE', #170, #169, #168 ) ; +#1258 = PLANE ( 'NONE', #114 ) ; +#1259 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000001900, 11.48913988196212400, -36.55868809443030200 ) ) ; +#1260 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 8.535533905932791000, -32.28553390593275900 ) ) ; +#1261 = AXIS2_PLACEMENT_3D ( 'NONE', #152, #149, #148 ) ; +#1262 = ORIENTED_EDGE ( 'NONE', *, *, #885, .F. ) ; +#1263 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1264 = VERTEX_POINT ( 'NONE', #782 ) ; +#1265 = LINE ( 'NONE', #132, #1209 ) ; +#1266 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1267 = DIRECTION ( 'NONE', ( -8.673617379884041600E-017, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1268 = ORIENTED_EDGE ( 'NONE', *, *, #477, .F. ) ; +#1269 = CIRCLE ( 'NONE', #1298, 0.5000000000000004400 ) ; +#1270 = EDGE_LOOP ( 'NONE', ( #503, #20, #1006, #1642 ) ) ; +#1271 = VECTOR ( 'NONE', #296, 1000.000000000000000 ) ; +#1272 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000001900, 2.500000000000000000, -38.75000000000000000 ) ) ; +#1273 = LINE ( 'NONE', #293, #1271 ) ; +#1274 = EDGE_CURVE ( 'NONE', #1254, #400, #814, .T. ) ; +#1275 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1276 = EDGE_CURVE ( 'NONE', #1403, #832, #876, .T. ) ; +#1277 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #32, 'distance_accuracy_value', 'NONE'); +#1278 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 2.500000000000000400, -38.75000000000000000 ) ) ; +#1279 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 10.00000000000000000, 4.999999999999998200 ) ) ; +#1280 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1281 = ADVANCED_FACE ( 'NONE', ( #789 ), #760, .F. ) ; +#1282 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1283 = EDGE_CURVE ( 'NONE', #829, #1325, #775, .T. ) ; +#1284 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.090249291540238200, 12.73833224558546800 ) ) ; +#1285 = ORIENTED_EDGE ( 'NONE', *, *, #1391, .F. ) ; +#1286 = ORIENTED_EDGE ( 'NONE', *, *, #30, .F. ) ; +#1287 = ORIENTED_EDGE ( 'NONE', *, *, #806, .F. ) ; +#1288 = VECTOR ( 'NONE', #331, 1000.000000000000000 ) ; +#1289 = PLANE ( 'NONE', #133 ) ; +#1290 = ADVANCED_FACE ( 'NONE', ( #773 ), #816, .T. ) ; +#1291 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999999800, 2.500000000000000000, 9.999999999999998200 ) ) ; +#1292 = ORIENTED_EDGE ( 'NONE', *, *, #663, .T. ) ; +#1293 = CIRCLE ( 'NONE', #1261, 2.000000000000000000 ) ; +#1294 = ORIENTED_EDGE ( 'NONE', *, *, #1051, .T. ) ; +#1295 = CIRCLE ( 'NONE', #1351, 2.000000000000000000 ) ; +#1296 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -24.01387818865996900, 11.20627521612004800 ) ) ; +#1297 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1298 = AXIS2_PLACEMENT_3D ( 'NONE', #181, #178, #175 ) ; +#1299 = ADVANCED_FACE ( 'NONE', ( #794 ), #737, .T. ) ; +#1300 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1301 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999999400, 10.00000000000000000, 9.999999999999998200 ) ) ; +#1302 = EDGE_CURVE ( 'NONE', #815, #1264, #758, .T. ) ; +#1303 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -5.650706642057635100, 13.00000000000000000 ) ) ; +#1304 = EDGE_CURVE ( 'NONE', #653, #634, #751, .T. ) ; +#1305 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 0.0000000000000000000, 13.00000000000000000 ) ) ; +#1306 = ORIENTED_EDGE ( 'NONE', *, *, #796, .T. ) ; +#1307 = EDGE_CURVE ( 'NONE', #420, #443, #770, .T. ) ; +#1308 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, -5.650706642057635100, 12.49999999999999600 ) ) ; +#1309 = ORIENTED_EDGE ( 'NONE', *, *, #776, .T. ) ; +#1310 = VECTOR ( 'NONE', #334, 1000.000000000000000 ) ; +#1311 = ORIENTED_EDGE ( 'NONE', *, *, #722, .F. ) ; +#1312 = LINE ( 'NONE', #338, #1310 ) ; +#1313 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1314 = VERTEX_POINT ( 'NONE', #547 ) ; +#1315 = CIRCLE ( 'NONE', #1319, 2.499999999999999600 ) ; +#1316 = CYLINDRICAL_SURFACE ( 'NONE', #1327, 2.000000000000000000 ) ; +#1317 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1318 = EDGE_CURVE ( 'NONE', #458, #529, #701, .T. ) ; +#1319 = AXIS2_PLACEMENT_3D ( 'NONE', #190, #188, #186 ) ; +#1320 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -7.848419889470654300, 13.69166122792734800 ) ) ; +#1321 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.500000000000000000, -38.75000000000000000 ) ) ; +#1322 = ORIENTED_EDGE ( 'NONE', *, *, #1411, .F. ) ; +#1323 = EDGE_CURVE ( 'NONE', #1264, #1580, #718, .T. ) ; +#1324 = VERTEX_POINT ( 'NONE', #623 ) ; +#1325 = VERTEX_POINT ( 'NONE', #498 ) ; +#1326 = CIRCLE ( 'NONE', #1336, 2.000000000000000000 ) ; +#1327 = AXIS2_PLACEMENT_3D ( 'NONE', #355, #376, #352 ) ; +#1328 = ORIENTED_EDGE ( 'NONE', *, *, #1522, .F. ) ; +#1329 = FACE_OUTER_BOUND ( 'NONE', #549, .T. ) ; +#1330 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1331 = EDGE_LOOP ( 'NONE', ( #1360, #342, #688, #1045 ) ) ; +#1332 = VECTOR ( 'NONE', #341, 1000.000000000000000 ) ; +#1333 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -24.80277563773198300, 9.368439310809765900 ) ) ; +#1334 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999998800, -24.01387818865996600, 11.20627521612004400 ) ) ; +#1335 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1336 = AXIS2_PLACEMENT_3D ( 'NONE', #321, #319, #318 ) ; +#1337 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -24.01387818865996600, 11.20627521612004800 ) ) ; +#1338 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -6.090249291540239100, 12.73833224558546600 ) ) ; +#1339 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1340 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -24.01793225539219300, 9.031542565268551900 ) ) ; +#1341 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1342 = ORIENTED_EDGE ( 'NONE', *, *, #1558, .F. ) ; +#1343 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -5.650706642057635100, 12.49999999999999600 ) ) ; +#1344 = ORIENTED_EDGE ( 'NONE', *, *, #755, .T. ) ; +#1345 = VECTOR ( 'NONE', #371, 1000.000000000000000 ) ; +#1346 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 2.500000000000000000, 15.00000000000000000 ) ) ; +#1347 = ORIENTED_EDGE ( 'NONE', *, *, #454, .T. ) ; +#1348 = LINE ( 'NONE', #327, #1288 ) ; +#1349 = ORIENTED_EDGE ( 'NONE', *, *, #1572, .T. ) ; +#1350 = CIRCLE ( 'NONE', #1382, 2.499999999999999600 ) ; +#1351 = AXIS2_PLACEMENT_3D ( 'NONE', #310, #305, #299 ) ; +#1352 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999258000, -23.34718519389445700, 10.92009493346302500 ) ) ; +#1353 = FACE_OUTER_BOUND ( 'NONE', #1637, .T. ) ; +#1354 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -23.34718519476548700, 10.92009493164642100 ) ) ; +#1355 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 2.500000000000000400, -38.75000000000000000 ) ) ; +#1356 = EDGE_CURVE ( 'NONE', #1416, #308, #676, .T. ) ; +#1357 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -23.20324252826955600, 8.770058589296631600 ) ) ; +#1358 = EDGE_CURVE ( 'NONE', #1164, #443, #673, .T. ) ; +#1359 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1360 = ORIENTED_EDGE ( 'NONE', *, *, #1274, .F. ) ; +#1361 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -22.63442504618632600, 10.68985947085248100 ) ) ; +#1362 = ORIENTED_EDGE ( 'NONE', *, *, #1356, .T. ) ; +#1363 = PLANE ( 'NONE', #438 ) ; +#1364 = ORIENTED_EDGE ( 'NONE', *, *, #1126, .F. ) ; +#1365 = VECTOR ( 'NONE', #456, 1000.000000000000000 ) ; +#1366 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -13.97138778022312900, 8.272114272004452900 ) ) ; +#1367 = VERTEX_POINT ( 'NONE', #490 ) ; +#1368 = LINE ( 'NONE', #339, #1332 ) ; +#1369 = EDGE_CURVE ( 'NONE', #458, #1324, #659, .T. ) ; +#1370 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -22.63442504634681600, 10.68985947019709200 ) ) ; +#1371 = EDGE_LOOP ( 'NONE', ( #612, #950, #1322, #651 ) ) ; +#1372 = LINE ( 'NONE', #373, #1345 ) ; +#1373 = AXIS2_PLACEMENT_3D ( 'NONE', #440, #384, #380 ) ; +#1374 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -24.99999999999999300, 8.908980334482196300 ) ) ; +#1375 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -21.54510234317944400, 8.364007776242473800 ) ) ; +#1376 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -21.16249870389172100, 10.32940931538612300 ) ) ; +#1377 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -21.16249870373122700, 10.32940931604150900 ) ) ; +#1378 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.168404344971010300E-016, 0.0000000000000000000 ) ) ; +#1379 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1380 = EDGE_CURVE ( 'NONE', #176, #304, #734, .T. ) ; +#1381 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.068481283613056700E-018 ) ) ; +#1382 = AXIS2_PLACEMENT_3D ( 'NONE', #364, #361, #359 ) ; +#1383 = ADVANCED_FACE ( 'NONE', ( #671 ), #395, .T. ) ; +#1384 = VERTEX_POINT ( 'NONE', #412 ) ; +#1385 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -20.71176587877599200, 8.221972890131636900 ) ) ; +#1386 = CIRCLE ( 'NONE', #1413, 2.000000000000000000 ) ; +#1387 = DESIGN_CONTEXT ( 'detailed design', #1609, 'design' ) ; +#1388 = ORIENTED_EDGE ( 'NONE', *, *, #1082, .F. ) ; +#1389 = CIRCLE ( 'NONE', #1427, 0.5000000000000004400 ) ; +#1390 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -20.41252044604024700, 10.20108969111040100 ) ) ; +#1391 = EDGE_CURVE ( 'NONE', #1052, #832, #661, .T. ) ; +#1392 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891000E-015, -1.000000000000000000 ) ) ; +#1393 = EDGE_LOOP ( 'NONE', ( #1049, #693, #1364, #1090 ) ) ; +#1394 = VECTOR ( 'NONE', #459, 1000.000000000000000 ) ; +#1395 = EDGE_CURVE ( 'NONE', #890, #1543, #638, .T. ) ; +#1396 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1397 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -20.41252044606545000, 10.20108969088206800 ) ) ; +#1398 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1399 = EDGE_CURVE ( 'NONE', #1324, #1222, #622, .T. ) ; +#1400 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -19.03814334696033200, 8.037252147473093800 ) ) ; +#1401 = ORIENTED_EDGE ( 'NONE', *, *, #964, .T. ) ; +#1402 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -18.89856631675872100, 10.03399183862550400 ) ) ; +#1403 = VERTEX_POINT ( 'NONE', #281 ) ; +#1404 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -24.99999999999999300, 8.908980334482196300 ) ) ; +#1405 = ORIENTED_EDGE ( 'NONE', *, *, #975, .T. ) ; +#1406 = LINE ( 'NONE', #468, #1394 ) ; +#1407 = VERTEX_POINT ( 'NONE', #328 ) ; +#1408 = LINE ( 'NONE', #462, #1417 ) ; +#1409 = EDGE_LOOP ( 'NONE', ( #1491, #522, #824, #1243, #260 ) ) ; +#1410 = LINE ( 'NONE', #411, #1365 ) ; +#1411 = EDGE_CURVE ( 'NONE', #193, #829, #640, .T. ) ; +#1412 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -18.89856631673351800, 10.03399183885383600 ) ) ; +#1413 = AXIS2_PLACEMENT_3D ( 'NONE', #410, #397, #396 ) ; +#1414 = ADVANCED_FACE ( 'NONE', ( #616 ), #337, .F. ) ; +#1415 = AXIS2_PLACEMENT_3D ( 'NONE', #425, #419, #417 ) ; +#1416 = VERTEX_POINT ( 'NONE', #248 ) ; +#1417 = VECTOR ( 'NONE', #457, 1000.000000000000000 ) ; +#1418 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -18.19783459398828600, 7.994890595535682800 ) ) ; +#1419 = ORIENTED_EDGE ( 'NONE', *, *, #990, .F. ) ; +#1420 = CIRCLE ( 'NONE', #1415, 0.5000000000000004400 ) ; +#1421 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -18.13438209179688300, 9.995355174306439500 ) ) ; +#1422 = EDGE_LOOP ( 'NONE', ( #1530, #875, #1179, #92 ) ) ; +#1423 = CIRCLE ( 'NONE', #1481, 2.000000000000000000 ) ; +#1424 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -24.80277563773198700, 9.368439310809765900 ) ) ; +#1425 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -18.13438209179736300, 9.995355174378627100 ) ) ; +#1426 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -16.93233976002446200, 8.003279708812137000 ) ) ; +#1427 = AXIS2_PLACEMENT_3D ( 'NONE', #437, #434, #433 ) ; +#1428 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -24.99999999999999300, 8.908980334482196300 ) ) ; +#1429 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -16.98395292476766700, 10.00298150381354600 ) ) ; +#1430 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 8.068481283613056700E-018, -1.000000000000000000 ) ) ; +#1431 = EDGE_CURVE ( 'NONE', #155, #329, #596, .T. ) ; +#1432 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -16.98395292476742900, 10.00298150377745200 ) ) ; +#1433 = ORIENTED_EDGE ( 'NONE', *, *, #929, .F. ) ; +#1434 = EDGE_CURVE ( 'NONE', #1084, #785, #619, .T. ) ; +#1435 = ORIENTED_EDGE ( 'NONE', *, *, #517, .T. ) ; +#1436 = VERTEX_POINT ( 'NONE', #151 ) ; +#1437 = LINE ( 'NONE', #590, #1441 ) ; +#1438 = ORIENTED_EDGE ( 'NONE', *, *, #585, .F. ) ; +#1439 = FACE_OUTER_BOUND ( 'NONE', #1146, .T. ) ; +#1440 = EDGE_LOOP ( 'NONE', ( #460, #1475, #1141, #51, #1047, #1517, #430, #138, #691, #1603 ) ) ; +#1441 = VECTOR ( 'NONE', #589, 1000.000000000000000 ) ; +#1442 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -16.50966165281864300, 8.018177281174633500 ) ) ; +#1443 = ORIENTED_EDGE ( 'NONE', *, *, #471, .T. ) ; +#1444 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -25.49999999999999600, 8.908980334482196300 ) ) ; +#1445 = EDGE_CURVE ( 'NONE', #400, #1479, #577, .T. ) ; +#1446 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -16.59976296162923500, 10.01653210532344800 ) ) ; +#1447 = AXIS2_PLACEMENT_3D ( 'NONE', #625, #620, #614 ) ; +#1448 = DIRECTION ( 'NONE', ( -8.673617379884034200E-017, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1449 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -16.59976296163652900, 10.01653210543602200 ) ) ; +#1450 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -15.66255172104391800, 8.073042939626121800 ) ) ; +#1451 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1452 = ORIENTED_EDGE ( 'NONE', *, *, #491, .F. ) ; +#1453 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -15.83098092370215500, 10.06632461879768000 ) ) ; +#1454 = CLOSED_SHELL ( 'NONE', ( #1016, #95, #117, #1110, #5, #1414, #145, #208, #928, #184, #1611, #839, #150, #85, #79, #112, #628, #235, #731, #1281, #66, #1464, #1498, #881, #867, #1620, #172, #747, #1290, #229, #966, #126, #405, #110, #1299, #13, #58, #368, #166, #320, #444, #1383, #611, #71 ) ) ; +#1455 = CYLINDRICAL_SURFACE ( 'NONE', #1456, 5.000000000000000900 ) ; +#1456 = AXIS2_PLACEMENT_3D ( 'NONE', #702, #662, #706 ) ; +#1457 = ORIENTED_EDGE ( 'NONE', *, *, #1380, .F. ) ; +#1458 = VECTOR ( 'NONE', #584, 1000.000000000000000 ) ; +#1459 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -8.673617379884041600E-017 ) ) ; +#1460 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1461 = ORIENTED_EDGE ( 'NONE', *, *, #1152, .T. ) ; +#1462 = LINE ( 'NONE', #629, #1478 ) ; +#1463 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -15.83098092369486100, 10.06632461868510500 ) ) ; +#1464 = ADVANCED_FACE ( 'NONE', ( #559 ), #550, .T. ) ; +#1465 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -15.23688826213086100, 8.113205315612550100 ) ) ; +#1466 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 0.0000000000000000000, 12.49999999999999800 ) ) ; +#1467 = EDGE_CURVE ( 'NONE', #302, #911, #225, .T. ) ; +#1468 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -15.44527532635886900, 10.10274430803851900 ) ) ; +#1469 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#1470 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 2.500000000000000400, -38.75000000000000000 ) ) ; +#1471 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -15.44527532636638900, 10.10274430809840500 ) ) ; +#1472 = VERTEX_POINT ( 'NONE', #116 ) ; +#1473 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#1474 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -2.500000000000000000, 15.00000000000000000 ) ) ; +#1475 = ORIENTED_EDGE ( 'NONE', *, *, #1358, .T. ) ; +#1476 = EDGE_CURVE ( 'NONE', #1222, #302, #594, .T. ) ; +#1477 = ORIENTED_EDGE ( 'NONE', *, *, #1161, .T. ) ; +#1478 = VECTOR ( 'NONE', #636, 999.9999999999998900 ) ; +#1479 = VERTEX_POINT ( 'NONE', #69 ) ; +#1480 = LINE ( 'NONE', #587, #1458 ) ; +#1481 = AXIS2_PLACEMENT_3D ( 'NONE', #571, #567, #565 ) ; +#1482 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -13.97138778027066100, 8.272114272201745800 ) ) ; +#1483 = ORIENTED_EDGE ( 'NONE', *, *, #1513, .F. ) ; +#1484 = CIRCLE ( 'NONE', #1488, 5.000000000000000900 ) ; +#1485 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -14.30216336997016800, 10.24628493148400400 ) ) ; +#1486 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1487 = EDGE_CURVE ( 'NONE', #427, #155, #534, .T. ) ; +#1488 = AXIS2_PLACEMENT_3D ( 'NONE', #652, #647, #645 ) ; +#1489 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -6.542980537723937400, 12.01244373387206300 ) ) ; +#1490 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1491 = ORIENTED_EDGE ( 'NONE', *, *, #1558, .T. ) ; +#1492 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -14.30216336995512800, 10.24628493136422900 ) ) ; +#1493 = ORIENTED_EDGE ( 'NONE', *, *, #600, .F. ) ; +#1494 = CIRCLE ( 'NONE', #1499, 2.000000000000000000 ) ; +#1495 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1496 = ORIENTED_EDGE ( 'NONE', *, *, #1178, .F. ) ; +#1497 = VECTOR ( 'NONE', #708, 1000.000000000000000 ) ; +#1498 = ADVANCED_FACE ( 'NONE', ( #527 ), #510, .T. ) ; +#1499 = AXIS2_PLACEMENT_3D ( 'NONE', #668, #667, #666 ) ; +#1500 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -13.14012574002762100, 8.428476754344176300 ) ) ; +#1501 = EDGE_LOOP ( 'NONE', ( #710, #1344, #49, #179 ) ) ; +#1502 = FACE_OUTER_BOUND ( 'NONE', #1422, .T. ) ; +#1503 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999999800, 2.500000000000000000, 9.999999999999998200 ) ) ; +#1504 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1505 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -13.55590000434238200, 10.38721618263855700 ) ) ; +#1506 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 0.5000000000000000000, 12.49999999999999800 ) ) ; +#1507 = EDGE_CURVE ( 'NONE', #1479, #1139, #574, .T. ) ; +#1508 = AXIS2_PLACEMENT_3D ( 'NONE', #698, #692, #685 ) ; +#1509 = ORIENTED_EDGE ( 'NONE', *, *, #1137, .T. ) ; +#1510 = ORIENTED_EDGE ( 'NONE', *, *, #1025, .F. ) ; +#1511 = ORIENTED_EDGE ( 'NONE', *, *, #904, .F. ) ; +#1512 = VECTOR ( 'NONE', #716, 1000.000000000000000 ) ; +#1513 = EDGE_CURVE ( 'NONE', #1622, #767, #556, .T. ) ; +#1514 = ORIENTED_EDGE ( 'NONE', *, *, #1025, .T. ) ; +#1515 = CIRCLE ( 'NONE', #1508, 5.000000000000000900 ) ; +#1516 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -13.55590000447634000, 10.38721618314635900 ) ) ; +#1517 = ORIENTED_EDGE ( 'NONE', *, *, #624, .T. ) ; +#1518 = LINE ( 'NONE', #725, #1497 ) ; +#1519 = EDGE_CURVE ( 'NONE', #911, #1367, #507, .T. ) ; +#1520 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1521 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -8.068481283613056700E-018, 1.000000000000000000 ) ) ; +#1522 = EDGE_CURVE ( 'NONE', #658, #122, #512, .T. ) ; +#1523 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -11.91503992054884300, 8.751661753071312300 ) ) ; +#1524 = AXIS2_PLACEMENT_3D ( 'NONE', #756, #749, #746 ) ; +#1525 = EDGE_LOOP ( 'NONE', ( #1158, #791, #807, #1347, #675, #1342, #809, #195, #766, #1287, #511, #1123, #345, #1294, #1496 ) ) ; +#1526 = ORIENTED_EDGE ( 'NONE', *, *, #1307, .F. ) ; +#1527 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -12.47239079983227100, 10.67305241955643600 ) ) ; +#1528 = ORIENTED_EDGE ( 'NONE', *, *, #990, .T. ) ; +#1529 = VECTOR ( 'NONE', #723, 999.9999999999998900 ) ; +#1530 = ORIENTED_EDGE ( 'NONE', *, *, #1550, .F. ) ; +#1531 = LINE ( 'NONE', #741, #1529 ) ; +#1532 = EDGE_LOOP ( 'NONE', ( #1328, #1088, #1577, #239 ) ) ; +#1533 = LINE ( 'NONE', #721, #1546 ) ; +#1534 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1284, #1235, #74 ), + ( #72, #67, #1223 ), + ( #1218, #1213, #1199 ), + ( #1194, #1192, #1190 ), + ( #1189, #1184, #1180 ), + ( #1176, #1175, #1171 ), + ( #1169, #1166, #1159 ), + ( #1157, #1151, #1148 ), + ( #1144, #1138, #1135 ), + ( #1133, #1131, #1130 ), + ( #1129, #1125, #1122 ), + ( #1119, #1114, #1111 ), + ( #1109, #1104, #1103 ), + ( #1101, #1099, #1089 ), + ( #1087, #1083, #1081 ), + ( #1078, #1076, #301 ), + ( #241, #134, #1074 ), + ( #1068, #1065, #1062 ), + ( #1057, #1044, #1041 ), + ( #1039, #1037, #1031 ), + ( #1027, #1014, #1013 ), + ( #1009, #999, #996 ), + ( #994, #992, #984 ), + ( #978, #976, #972 ), + ( #971, #970, #967 ), + ( #965, #962, #959 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 1.517883041479706200E-018, 0.001273022029655094700, 0.001909533044482641200, 0.002546044059310187700, 0.005092088118620373800, 0.006365110148275466800, 0.007638132177930559800, 0.01018417623724074600, 0.01145719826689584100, 0.01273022029655093400, 0.01527626435586112000, 0.01782230841517130600, 0.02036835247448149200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865477900, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865477900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1535 = AXIS2_PLACEMENT_3D ( 'NONE', #778, #777, #771 ) ; +#1536 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 13.88695699409810800, -34.64043440472151800 ) ) ; +#1537 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002800, 12.07106781186551100, -28.75000000000000000 ) ) ; +#1538 = EDGE_CURVE ( 'NONE', #529, #1052, #486, .T. ) ; +#1539 = AXIS2_PLACEMENT_3D ( 'NONE', #841, #869, #840 ) ; +#1540 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1541 = ORIENTED_EDGE ( 'NONE', *, *, #1030, .T. ) ; +#1542 = ORIENTED_EDGE ( 'NONE', *, *, #1137, .F. ) ; +#1543 = VERTEX_POINT ( 'NONE', #1574 ) ; +#1544 = VECTOR ( 'NONE', #783, 1000.000000000000000 ) ; +#1545 = EDGE_LOOP ( 'NONE', ( #346, #618, #639, #728, #748, #793, #836, #879, #913, #939 ) ) ; +#1546 = VECTOR ( 'NONE', #742, 1000.000000000000000 ) ; +#1547 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 0.0000000000000000000, 15.00000000000000000 ) ) ; +#1548 = VECTOR ( 'NONE', #761, 1000.000000000000000 ) ; +#1549 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -12.47239079976528900, 10.67305241930253400 ) ) ; +#1550 = EDGE_CURVE ( 'NONE', #262, #1069, #465, .T. ) ; +#1551 = EDGE_CURVE ( 'NONE', #872, #850, #470, .T. ) ; +#1552 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ; +#1553 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -11.51034736420913500, 8.874305261825163900 ) ) ; +#1554 = APPROVAL_ROLE ( '' ) ; +#1555 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -24.99999999999999300, 9.408980334482196300 ) ) ; +#1556 = EDGE_CURVE ( 'NONE', #1436, #420, #483, .T. ) ; +#1557 = VERTEX_POINT ( 'NONE', #811 ) ; +#1558 = EDGE_CURVE ( 'NONE', #1139, #767, #453, .T. ) ; +#1559 = ORIENTED_EDGE ( 'NONE', *, *, #1205, .T. ) ; +#1560 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#1561 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 13.57460947032089600, -33.75000000000000000 ) ) ; +#1562 = ORIENTED_EDGE ( 'NONE', *, *, #1304, .F. ) ; +#1563 = LINE ( 'NONE', #726, #1512 ) ; +#1564 = DATE_TIME_ROLE ( 'classification_date' ) ; +#1565 = ORIENTED_EDGE ( 'NONE', *, *, #1100, .F. ) ; +#1566 = LINE ( 'NONE', #744, #1544 ) ; +#1567 = VERTEX_POINT ( 'NONE', #1134 ) ; +#1568 = VECTOR ( 'NONE', #799, 1000.000000000000000 ) ; +#1569 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#1570 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1571 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 0.0000000000000000000, 12.49999999999999800 ) ) ; +#1572 = EDGE_CURVE ( 'NONE', #120, #1384, #428, .T. ) ; +#1573 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#1574 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000003200, 2.500000000000000400, -24.17893218813454200 ) ) ; +#1575 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#1576 = ORIENTED_EDGE ( 'NONE', *, *, #896, .F. ) ; +#1577 = ORIENTED_EDGE ( 'NONE', *, *, #776, .F. ) ; +#1578 = CIRCLE ( 'NONE', #1524, 10.00000000000000200 ) ; +#1579 = EDGE_CURVE ( 'NONE', #832, #593, #447, .T. ) ; +#1580 = VERTEX_POINT ( 'NONE', #678 ) ; +#1581 = LINE ( 'NONE', #764, #1548 ) ; +#1582 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#1583 = EDGE_LOOP ( 'NONE', ( #284, #1618, #1309, #979 ) ) ; +#1584 = LINE ( 'NONE', #780, #1568 ) ; +#1585 = APPROVAL_ROLE ( '' ) ; +#1586 = CIRCLE ( 'NONE', #1535, 0.5000000000000004400 ) ; +#1587 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#1588 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1589 = EDGE_CURVE ( 'NONE', #1557, #1314, #407, .T. ) ; +#1590 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -12.11727336384219100, 10.78082108054457000 ) ) ; +#1591 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1592 = EDGE_CURVE ( 'NONE', #1407, #1580, #421, .T. ) ; +#1593 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -12.11727336398061500, 10.78082108094054400 ) ) ; +#1594 = DATE_TIME_ROLE ( 'creation_date' ) ; +#1595 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#1596 = ORIENTED_EDGE ( 'NONE', *, *, #1073, .T. ) ; +#1597 = APPROVAL_ROLE ( '' ) ; +#1598 = ORIENTED_EDGE ( 'NONE', *, *, #1550, .T. ) ; +#1599 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#1600 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -10.70949422095073300, 9.154272716738274700 ) ) ; +#1601 = VERTEX_POINT ( 'NONE', #514 ) ; +#1602 = CYLINDRICAL_SURFACE ( 'NONE', #1539, 2.000000000000000000 ) ; +#1603 = ORIENTED_EDGE ( 'NONE', *, *, #515, .T. ) ; +#1604 = VECTOR ( 'NONE', #838, 1000.000000000000000 ) ; +#1605 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #1609 ) ; +#1606 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 10.00000000000000000, 4.999999999999998200 ) ) ; +#1607 = ORIENTED_EDGE ( 'NONE', *, *, #1082, .T. ) ; +#1608 = CIRCLE ( 'NONE', #7, 5.000000000000000900 ) ; +#1609 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#1610 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1128, #1118, #1096, #1086, #1079, #1077, #1063, #1060, #1058, #1048, #1038, #1019, #1012, #1001, #991, #974, #969, #963, #955, #948, #942, #933, #927, #924, #916, #907 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001273022029655098400, 0.001909533044482645800, 0.002546044059310193000, 0.005092088118620382400, 0.006365110148275475400, 0.007638132177930568500, 0.01018417623724075400, 0.01145719826689584600, 0.01273022029655093700, 0.01527626435586112300, 0.01782230841517130900, 0.02036835247448149500 ), + .UNSPECIFIED. ) ; +#1611 = ADVANCED_FACE ( 'NONE', ( #401 ), #383, .T. ) ; +#1612 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1613 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -11.42257890502997100, 11.02367689119740700 ) ) ; +#1614 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#1615 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ; +#1616 = MECHANICAL_CONTEXT ( 'NONE', #1630, 'mechanical' ) ; +#1617 = ORIENTED_EDGE ( 'NONE', *, *, #845, .T. ) ; +#1618 = ORIENTED_EDGE ( 'NONE', *, *, #763, .F. ) ; +#1619 = LINE ( 'NONE', #826, #1604 ) ; +#1620 = ADVANCED_FACE ( 'NONE', ( #389 ), #370, .T. ) ; +#1621 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -11.42257890489154400, 11.02367689080143400 ) ) ; +#1622 = VERTEX_POINT ( 'NONE', #920 ) ; +#1623 = FACE_OUTER_BOUND ( 'NONE', #1583, .T. ) ; +#1624 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1625 = EDGE_LOOP ( 'NONE', ( #31, #70, #709, #1064, #1596, #1097, #1292, #1443, #1229, #1598 ) ) ; +#1626 = CIRCLE ( 'NONE', #41, 2.000000000000000000 ) ; +#1627 = TOROIDAL_SURFACE ( 'NONE', #9, 0.5000000000000000000, 2.000000000000000000 ) ; +#1628 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 2.500000000000000000, 9.999999999999998200 ) ) ; +#1629 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.068481283613056700E-018, -1.000000000000000000 ) ) ; +#1630 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#1631 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -10.31164176140694600, 9.312325625395416800 ) ) ; +#1632 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1633 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -11.08157245239237200, 11.15941459203079800 ) ) ; +#1634 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1635 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -11.08157245251802300, 11.15941459230580100 ) ) ; +#1636 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -5.650706642057635100, 12.49999999999999600 ) ) ; +#1637 = EDGE_LOOP ( 'NONE', ( #94, #1435, #774, #1249 ) ) ; +#1638 = ORIENTED_EDGE ( 'NONE', *, *, #642, .T. ) ; +#1639 = ORIENTED_EDGE ( 'NONE', *, *, #852, .T. ) ; +#1640 = CIRCLE ( 'NONE', #101, 2.499999999999998700 ) ; +#1641 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1642 = ORIENTED_EDGE ( 'NONE', *, *, #1205, .F. ) ; +#1643 = TOROIDAL_SURFACE ( 'NONE', #48, 0.5000000000000000000, 2.000000000000000000 ) ; +#1644 = ORIENTED_EDGE ( 'NONE', *, *, #1276, .T. ) ; +#1645 = FACE_OUTER_BOUND ( 'NONE', #1625, .T. ) ; +#1646 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -24.99999999999999300, 9.408980334482196300 ) ) ; +#1647 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -9.146021868226156900, 9.844898012964796100 ) ) ; +#1648 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #1630 ) ; +#1649 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1650 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -10.09962527910310600, 11.60806680927137800 ) ) ; +#1651 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1652 = ORIENTED_EDGE ( 'NONE', *, *, #1302, .T. ) ; +#1653 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1654 = EDGE_LOOP ( 'NONE', ( #382, #1652, #12, #1401 ) ) ; +#1655 = FACE_OUTER_BOUND ( 'NONE', #917, .T. ) ; +#1656 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#1657 = ORIENTED_EDGE ( 'NONE', *, *, #993, .F. ) ; +#1658 = FACE_OUTER_BOUND ( 'NONE', #1206, .T. ) ; +#1659 = EDGE_LOOP ( 'NONE', ( #369, #73, #1419, #403 ) ) ; +#1660 = FACE_OUTER_BOUND ( 'NONE', #1032, .T. ) ; +#1661 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -5.650706642057635100, 12.49999999999999600 ) ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STEP/Trigger_Guard.step b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Trigger_Guard.step new file mode 100644 index 0000000..ca55c16 --- /dev/null +++ b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Trigger_Guard.step @@ -0,0 +1,5241 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Trigger_Guard.STEP', + '2013-11-10T07:44:58', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = VECTOR ( 'NONE', #1203, 1000.000000000000000 ) ; +#2 = CARTESIAN_POINT ( 'NONE', ( 2.768528700697119300, 2.627288019610059900, -12.87978940825533400 ) ) ; +#3 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, -4.452896807675744000, -16.41292689845144500 ) ) ; +#4 = CARTESIAN_POINT ( 'NONE', ( 7.355084497044325400, 6.765216965440469500, -11.66976808771375000 ) ) ; +#5 = AXIS2_PLACEMENT_3D ( 'NONE', #2813, #2787, #328 ) ; +#6 = CARTESIAN_POINT ( 'NONE', ( 7.115607587768039400, 8.054510599742881600, -9.788036085774424000 ) ) ; +#7 = LINE ( 'NONE', #1282, #1198 ) ; +#8 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1525, #1575, #1469, #1456 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.499287275856123100, 1.570796326794896600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9995739166973018900, 0.9995739166973018900, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#9 = CARTESIAN_POINT ( 'NONE', ( 4.985275598499079300, 2.473287854180402000, -12.90694379245414700 ) ) ; +#10 = CARTESIAN_POINT ( 'NONE', ( 5.299452380538625100, 4.299744816866567700, 13.84066886599444000 ) ) ; +#11 = CARTESIAN_POINT ( 'NONE', ( -3.355325991800724300, 7.499997531949973400, -3.629415488831615500 ) ) ; +#12 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 9.672689304129706400, 12.69640170313156000 ) ) ; +#13 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000004400, 7.499997531949969900, 6.500016766439446600 ) ) ; +#14 = CARTESIAN_POINT ( 'NONE', ( 5.158311389530493500, 6.246744848163421800, -11.17373620185534300 ) ) ; +#15 = AXIS2_PLACEMENT_3D ( 'NONE', #2890, #590, #2544 ) ; +#16 = PLANE ( 'NONE', #938 ) ; +#17 = CARTESIAN_POINT ( 'NONE', ( 8.296767334560133400, 7.205312157576344100, -10.40039817466533000 ) ) ; +#18 = EDGE_CURVE ( 'NONE', #2519, #534, #3535, .T. ) ; +#19 = AXIS2_PLACEMENT_3D ( 'NONE', #867, #856, #846 ) ; +#20 = CARTESIAN_POINT ( 'NONE', ( 5.012778414273876500, 2.857238143957337300, -15.09560685253280400 ) ) ; +#21 = CARTESIAN_POINT ( 'NONE', ( 3.778652442610498200, 2.979901866578728200, 15.00001676643945100 ) ) ; +#22 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000004400, 8.499997531949970800, 6.500016766439446600 ) ) ; +#23 = CARTESIAN_POINT ( 'NONE', ( -0.3337953971900955400, 4.361660788753880500, 13.86466515462858600 ) ) ; +#24 = CARTESIAN_POINT ( 'NONE', ( 2.756181488257504400, 2.454916003848706600, -12.91018324535316500 ) ) ; +#25 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#26 = CARTESIAN_POINT ( 'NONE', ( 6.105432561681663400, 5.758978726000523600, -11.72920804674426500 ) ) ; +#27 = VERTEX_POINT ( 'NONE', #573 ) ; +#28 = LINE ( 'NONE', #1314, #518 ) ; +#29 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.243794116878613800E-016, -1.000000000000000000 ) ) ; +#30 = CARTESIAN_POINT ( 'NONE', ( 7.443488416502990600, 6.889529946822885400, -9.461017493858744100 ) ) ; +#31 = ORIENTED_EDGE ( 'NONE', *, *, #3643, .T. ) ; +#32 = EDGE_LOOP ( 'NONE', ( #2324, #138, #2152, #2001, #3580, #3685 ) ) ; +#33 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, 2.499997531949971700, -12.90223415561734700 ) ) ; +#34 = ORIENTED_EDGE ( 'NONE', *, *, #4050, .F. ) ; +#35 = CARTESIAN_POINT ( 'NONE', ( 4.985754122161609700, 2.351284769346565700, -12.92845622804045600 ) ) ; +#36 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000002200, 2.499997531949969900, 15.00001676643945100 ) ) ; +#37 = CIRCLE ( 'NONE', #3770, 5.000000000000000000 ) ; +#38 = ORIENTED_EDGE ( 'NONE', *, *, #4164, .T. ) ; +#39 = ADVANCED_FACE ( 'NONE', ( #3523 ), #3469, .T. ) ; +#40 = ORIENTED_EDGE ( 'NONE', *, *, #967, .T. ) ; +#41 = CIRCLE ( 'NONE', #102, 2.500000000000000400 ) ; +#42 = EDGE_CURVE ( 'NONE', #4178, #2923, #3473, .T. ) ; +#43 = ORIENTED_EDGE ( 'NONE', *, *, #162, .T. ) ; +#44 = CARTESIAN_POINT ( 'NONE', ( 5.004263095595004700, 2.738360895130638600, -15.12600068875559600 ) ) ; +#45 = CARTESIAN_POINT ( 'NONE', ( 8.246497042328918800, 7.529466997969613800, -3.888637029596866400 ) ) ; +#46 = CARTESIAN_POINT ( 'NONE', ( 6.660904406572544900, 6.246744848163547000, -12.67632921889722700 ) ) ; +#47 = VERTEX_POINT ( 'NONE', #1224 ) ; +#48 = FACE_OUTER_BOUND ( 'NONE', #1109, .T. ) ; +#49 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.559374635020935700E-016, -1.000000000000000000 ) ) ; +#50 = CARTESIAN_POINT ( 'NONE', ( 7.228011944669604300, 8.146335485944247200, -9.700228555083562300 ) ) ; +#51 = ORIENTED_EDGE ( 'NONE', *, *, #2400, .T. ) ; +#52 = LINE ( 'NONE', #239, #1 ) ; +#53 = EDGE_LOOP ( 'NONE', ( #3154, #3203, #3269, #3628 ) ) ; +#54 = EDGE_CURVE ( 'NONE', #1576, #2251, #3481, .T. ) ; +#55 = APPROVAL_PERSON_ORGANIZATION ( #1553, #3959, #957 ) ; +#56 = LINE ( 'NONE', #1045, #985 ) ; +#57 = CARTESIAN_POINT ( 'NONE', ( -0.1369717420643044600, 4.014252318596207100, 13.73338177822551400 ) ) ; +#58 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 9.999997531949969000, 12.50001676643944900 ) ) ; +#59 = CARTESIAN_POINT ( 'NONE', ( 4.704194785437570300, 5.942166846758339300, -11.48692006674654200 ) ) ; +#60 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #3543, #3642, #3822, #3814 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.712388980384689700, 4.783898031323462700 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9995739166973018900, 0.9995739166973018900, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#61 = AXIS2_PLACEMENT_3D ( 'NONE', #1613, #1905, #1703 ) ; +#62 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -13.13176217742977800, -2.047733685261128700E-015 ) ) ; +#63 = CARTESIAN_POINT ( 'NONE', ( 8.453428809589084400, 7.256234993256905200, -10.17611612767736800 ) ) ; +#64 = ADVANCED_FACE ( 'NONE', ( #3434 ), #3428, .T. ) ; +#65 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999600, 7.499997531949969000, 14.00001676643945100 ) ) ; +#66 = FACE_OUTER_BOUND ( 'NONE', #1216, .T. ) ; +#67 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995600, 8.499997531949970800, 6.500016766439451000 ) ) ; +#68 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000152800, 2.282102806106356000, -12.94065487473765000 ) ) ; +#69 = CARTESIAN_POINT ( 'NONE', ( -13.96446609406725700, 7.499997531949968100, 14.00001676643944900 ) ) ; +#70 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3177, #533, #1825 ), + ( #3832, #1497, #3491 ), + ( #1160, #3157, #843 ), + ( #3844, #1513, #3502 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 1.570796326794896800, 1.863539516461594700 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000), + ( 1.000000000000000000, 0.9789590656555384700, 1.000000000000000000), + ( 1.000000000000000000, 0.9789590656555384700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#71 = CARTESIAN_POINT ( 'NONE', ( 4.990706175465313700, 2.229838546762540600, -12.94987047378687700 ) ) ; +#72 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999800, 8.535531437882706700, 13.37869642287980700 ) ) ; +#73 = CARTESIAN_POINT ( 'NONE', ( 5.806647694690143500, 5.365441345150419900, -12.02799291373819700 ) ) ; +#74 = AXIS2_PLACEMENT_3D ( 'NONE', #4173, #1852, #2185 ) ; +#75 = CARTESIAN_POINT ( 'NONE', ( 7.455016964283418100, 6.929234662424582900, -9.386247839294688000 ) ) ; +#76 = CARTESIAN_POINT ( 'NONE', ( 6.347720541681178800, 5.942166846758340200, -13.13044582299014900 ) ) ; +#77 = EDGE_CURVE ( 'NONE', #534, #1896, #3374, .T. ) ; +#78 = AXIS2_PLACEMENT_3D ( 'NONE', #1709, #1136, #1103 ) ; +#79 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, -13.88176217742977400, -1.726605412819520900E-015 ) ) ; +#80 = VERTEX_POINT ( 'NONE', #592 ) ; +#81 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#82 = ORIENTED_EDGE ( 'NONE', *, *, #1463, .F. ) ; +#83 = ORIENTED_EDGE ( 'NONE', *, *, #664, .F. ) ; +#84 = CARTESIAN_POINT ( 'NONE', ( 0.1599834344313343400, 3.488480692773354700, 13.55435722625466600 ) ) ; +#85 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 9.999997531949969000, 12.50001676643944900 ) ) ; +#86 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 7.499997531949971700, -4.999983233560546300 ) ) ; +#87 = ORIENTED_EDGE ( 'NONE', *, *, #2963, .T. ) ; +#88 = CARTESIAN_POINT ( 'NONE', ( 3.924663160904790600, 5.262698706219140400, -12.02452808366589200 ) ) ; +#89 = VERTEX_POINT ( 'NONE', #1805 ) ; +#90 = DIRECTION ( 'NONE', ( 1.000000000000000000, -8.673617379884035500E-016, 0.0000000000000000000 ) ) ; +#91 = CARTESIAN_POINT ( 'NONE', ( 7.322067110553512700, 8.207488376332991100, -9.588030593021271000 ) ) ; +#92 = EDGE_LOOP ( 'NONE', ( #1193, #1269, #1286, #1362 ) ) ; +#93 = FACE_OUTER_BOUND ( 'NONE', #2397, .T. ) ; +#94 = CARTESIAN_POINT ( 'NONE', ( 7.620077603871124000, 7.469607808612442700, 8.054890595479507800 ) ) ; +#95 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 9.999997531949969000, 12.50001676643944900 ) ) ; +#96 = ORIENTED_EDGE ( 'NONE', *, *, #4157, .F. ) ; +#97 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.243794116878613100E-016 ) ) ; +#98 = VERTEX_POINT ( 'NONE', #3465 ) ; +#99 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.619179373453280700, -15.15647231967238900 ) ) ; +#100 = CIRCLE ( 'NONE', #1028, 6.000000000000000000 ) ; +#101 = ORIENTED_EDGE ( 'NONE', *, *, #834, .F. ) ; +#102 = AXIS2_PLACEMENT_3D ( 'NONE', #2195, #2525, #562 ) ; +#103 = ORIENTED_EDGE ( 'NONE', *, *, #994, .F. ) ; +#104 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000900, 2.109289132199380300, -12.97112658808280400 ) ) ; +#105 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#106 = ORIENTED_EDGE ( 'NONE', *, *, #2186, .F. ) ; +#107 = CARTESIAN_POINT ( 'NONE', ( 5.356496239976682900, 4.575537268429418900, -12.47814436845037500 ) ) ; +#108 = EDGE_CURVE ( 'NONE', #1081, #2311, #3383, .T. ) ; +#109 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#110 = CARTESIAN_POINT ( 'NONE', ( 8.565461751399956500, 7.289788760521788400, -9.914721068897783600 ) ) ; +#111 = ADVANCED_FACE ( 'NONE', ( #3316 ), #298, .T. ) ; +#112 = ORIENTED_EDGE ( 'NONE', *, *, #4161, .T. ) ; +#113 = CARTESIAN_POINT ( 'NONE', ( 5.810112524761828800, 5.262698706219141300, -13.90997744752292900 ) ) ; +#114 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#115 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.109289132199379900, -12.97112658808280500 ) ) ; +#116 = CIRCLE ( 'NONE', #2381, 5.000000000000000900 ) ; +#117 = CARTESIAN_POINT ( 'NONE', ( 0.2540524724092194700, 3.308297761796553000, 13.50235254392013200 ) ) ; +#118 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000002700, 7.621566414235089400, -9.999983233560549000 ) ) ; +#119 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 7.499997531949969000, 14.00001676643945100 ) ) ; +#120 = TOROIDAL_SURFACE ( 'NONE', #165, 7.249999999999999100, 2.250000000000000000 ) ; +#121 = CARTESIAN_POINT ( 'NONE', ( 3.599307250831736700, 4.887860089688797600, -12.24891146992306400 ) ) ; +#122 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000011500, 7.499997531949966300, 7.500016766439443900 ) ) ; +#123 = CARTESIAN_POINT ( 'NONE', ( 6.175210994631164000, 7.597114959037286400, -10.99998323356055100 ) ) ; +#124 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#125 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000009800, 7.499997531949966300, 7.500016766439442200 ) ) ; +#126 = EDGE_CURVE ( 'NONE', #1171, #3265, #850, .T. ) ; +#127 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 9.099997531949975700, -1.809983233560551500 ) ) ; +#128 = CARTESIAN_POINT ( 'NONE', ( -1.284073044129347300, 7.597114977190917000, -9.999983233560549000 ) ) ; +#129 = EDGE_CURVE ( 'NONE', #3971, #3299, #3276, .T. ) ; +#130 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, -13.88176217742977400, -1.726605412819520900E-015 ) ) ; +#131 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#132 = VERTEX_POINT ( 'NONE', #1514 ) ; +#133 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -13.13176217742977600, -9.626418191079084300 ) ) ; +#134 = EDGE_LOOP ( 'NONE', ( #1079, #326, #2508, #34 ) ) ; +#135 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 7.499997531949969000, 12.50001676643945100 ) ) ; +#136 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000008000, 7.499997531949966300, 7.500016766439440400 ) ) ; +#137 = EDGE_CURVE ( 'NONE', #4178, #2311, #3268, .T. ) ; +#138 = ORIENTED_EDGE ( 'NONE', *, *, #2817, .T. ) ; +#139 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.243794116878613800E-016, 1.000000000000000000 ) ) ; +#140 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000100400, -12.94869481606639600, -8.572633673544025600 ) ) ; +#141 = DIRECTION ( 'NONE', ( -0.9895990150725350000, 0.1438533606401639600, -5.189823403183699400E-016 ) ) ; +#142 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #2075, #2054, #1922, #1910 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 5.100165331716908700, 6.133679135635012400 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9129506960894546700, 0.9129506960894546700, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#143 = ORIENTED_EDGE ( 'NONE', *, *, #2442, .F. ) ; +#144 = EDGE_LOOP ( 'NONE', ( #1425, #3564, #2214, #866 ) ) ; +#145 = VERTEX_POINT ( 'NONE', #3181 ) ; +#146 = AXIS2_PLACEMENT_3D ( 'NONE', #2539, #1206, #4116 ) ; +#147 = CARTESIAN_POINT ( 'NONE', ( 4.882497287015120900, -12.79739131097610800, -7.520761378531910100 ) ) ; +#148 = ORIENTED_EDGE ( 'NONE', *, *, #729, .T. ) ; +#149 = CIRCLE ( 'NONE', #389, 2.500000000000000400 ) ; +#150 = ORIENTED_EDGE ( 'NONE', *, *, #1297, .T. ) ; +#151 = ADVANCED_FACE ( 'NONE', ( #3324 ), #3217, .F. ) ; +#152 = CARTESIAN_POINT ( 'NONE', ( 4.711104025798620800, -12.64078546381962600, -5.936317379789001000 ) ) ; +#153 = CARTESIAN_POINT ( 'NONE', ( 7.158736959670073400, 7.444074005483004800, 8.246571443335382100 ) ) ; +#154 = CYLINDRICAL_SURFACE ( 'NONE', #291, 7.499999999999996400 ) ; +#155 = ORIENTED_EDGE ( 'NONE', *, *, #1402, .F. ) ; +#156 = ORIENTED_EDGE ( 'NONE', *, *, #2587, .T. ) ; +#157 = CARTESIAN_POINT ( 'NONE', ( 4.654936067756664500, -12.60033550821406600, -5.407396333278429200 ) ) ; +#158 = CARTESIAN_POINT ( 'NONE', ( -4.050806114131173500, 7.499997531949967200, 8.154633239451833000 ) ) ; +#159 = VECTOR ( 'NONE', #2228, 1000.000000000000000 ) ; +#160 = ORIENTED_EDGE ( 'NONE', *, *, #1406, .T. ) ; +#161 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#162 = EDGE_CURVE ( 'NONE', #3351, #3529, #3366, .T. ) ; +#163 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122082400, -0.1736481776669296900 ) ) ; +#164 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 7.499997531949971700, -1.809983233560551500 ) ) ; +#165 = AXIS2_PLACEMENT_3D ( 'NONE', #1552, #1374, #1359 ) ; +#166 = CARTESIAN_POINT ( 'NONE', ( 4.550000000000001600, -12.53176217742977800, -3.277205641478954800 ) ) ; +#167 = CARTESIAN_POINT ( 'NONE', ( 5.214388241288734300, 4.182421432651199900, -12.62025236713756000 ) ) ; +#168 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.559374635020935700E-016, 1.000000000000000000 ) ) ; +#169 = CARTESIAN_POINT ( 'NONE', ( -4.198056813959966300, 7.499997531955788300, 8.301959952479485600 ) ) ; +#170 = AXIS2_PLACEMENT_3D ( 'NONE', #639, #3501, #3376 ) ; +#171 = FACE_OUTER_BOUND ( 'NONE', #3152, .T. ) ; +#172 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, -6.631762177429775000, 14.75001676643945100 ) ) ; +#173 = DIRECTION ( 'NONE', ( -4.956352788505163400E-017, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#174 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#175 = CARTESIAN_POINT ( 'NONE', ( 7.421686170596884400, 6.847878330210639000, -9.548934993108639800 ) ) ; +#176 = DATE_AND_TIME ( #3553, #2640 ) ; +#177 = CARTESIAN_POINT ( 'NONE', ( 5.585729138504610200, 4.887860089688691000, -14.23533335759627700 ) ) ; +#178 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#179 = CARTESIAN_POINT ( 'NONE', ( 3.483461036360164400, 4.715753562953457500, 11.99418156894979500 ) ) ; +#180 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000001400, 8.535531437882706700, 13.37869642287980700 ) ) ; +#181 = EDGE_CURVE ( 'NONE', #3723, #604, #3271, .T. ) ; +#182 = ORIENTED_EDGE ( 'NONE', *, *, #1569, .F. ) ; +#183 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -13.13176217742977900, 7.500016766439451000 ) ) ; +#184 = CARTESIAN_POINT ( 'NONE', ( 7.321836256865094800, 8.499997527096883900, 7.076554614046890500 ) ) ; +#185 = EDGE_LOOP ( 'NONE', ( #4045, #3466, #524, #2715 ) ) ; +#186 = ORIENTED_EDGE ( 'NONE', *, *, #2952, .T. ) ; +#187 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#188 = CARTESIAN_POINT ( 'NONE', ( 7.389277050839974800, 8.247747006236151500, -9.457352151229166300 ) ) ; +#189 = CARTESIAN_POINT ( 'NONE', ( 5.255369477397408700, 4.111075824597207900, 14.37973102421283900 ) ) ; +#190 = EDGE_CURVE ( 'NONE', #3949, #2932, #1790, .T. ) ; +#191 = CIRCLE ( 'NONE', #3435, 7.500000000000000000 ) ; +#192 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2312, #2279, #2252 ), + ( #2244, #2239, #2232 ), + ( #2227, #2219, #2211 ), + ( #2200, #2194, #2184 ), + ( #2173, #2162, #2156 ), + ( #2144, #2140, #2130 ), + ( #2125, #2120, #2118 ), + ( #2104, #2099, #2090 ), + ( #2084, #2068, #2048 ), + ( #2042, #2031, #2019 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 2.168404344971008900E-019, 0.001588996558687338700, 0.003177993117374677300, 0.004766989676062016400, 0.006355986234749354600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.6731557049601736300, 1.000000000000000000), + ( 1.000000000000000000, 0.6402811618826336200, 1.000000000000000000), + ( 1.000000000000000000, 0.5791414085474957400, 1.000000000000000000), + ( 1.000000000000000000, 0.5508540443870851800, 1.000000000000000000), + ( 1.000000000000000000, 0.5024262956447830300, 1.000000000000000000), + ( 1.000000000000000000, 0.4823399019977980800, 1.000000000000000000), + ( 1.000000000000000000, 0.4546736294548379100, 1.000000000000000000), + ( 1.000000000000000000, 0.4471529736628964700, 1.000000000000000000), + ( 1.000000000000000000, 0.4472135954999599800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#193 = VERTEX_POINT ( 'NONE', #3461 ) ; +#194 = AXIS2_PLACEMENT_3D ( 'NONE', #1368, #2582, #2646 ) ; +#195 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 7.499997531949971700, -4.999983233560546300 ) ) ; +#196 = ORIENTED_EDGE ( 'NONE', *, *, #129, .T. ) ; +#197 = CARTESIAN_POINT ( 'NONE', ( -4.345383526987957300, 7.499997531949967200, 8.449210652308631000 ) ) ; +#198 = LINE ( 'NONE', #4206, #159 ) ; +#199 = FACE_OUTER_BOUND ( 'NONE', #1178, .T. ) ; +#200 = ORIENTED_EDGE ( 'NONE', *, *, #2809, .F. ) ; +#201 = EDGE_LOOP ( 'NONE', ( #3380, #2879, #1789, #3932, #781 ) ) ; +#202 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #3330, #988, ( #689 ) ) ; +#203 = FACE_OUTER_BOUND ( 'NONE', #1580, .T. ) ; +#204 = CARTESIAN_POINT ( 'NONE', ( 7.185793620332793500, 7.445226690683918800, 8.239041428353079500 ) ) ; +#205 = ORIENTED_EDGE ( 'NONE', *, *, #3839, .F. ) ; +#206 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.499997531949969000, 15.00001676643945100 ) ) ; +#207 = CARTESIAN_POINT ( 'NONE', ( -2.499253340664165300, 8.369912996713910800, -9.038619501127591600 ) ) ; +#208 = ORIENTED_EDGE ( 'NONE', *, *, #1612, .T. ) ; +#209 = CARTESIAN_POINT ( 'NONE', ( 5.054609920521128800, 3.505281526329760800, 12.44540684591809800 ) ) ; +#210 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2857, #2867, #2844, #2798, #2781, #2759 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.0002395549052373224200, 0.0004791098104746448300 ), + .UNSPECIFIED. ) ; +#211 = CARTESIAN_POINT ( 'NONE', ( 3.099176717838163500, 4.093044906001431100, -12.59382907888417000 ) ) ; +#212 = EDGE_CURVE ( 'NONE', #3883, #4145, #3172, .T. ) ; +#213 = CARTESIAN_POINT ( 'NONE', ( 8.498506681328553500, 7.391593752587553500, -8.870153241978945500 ) ) ; +#214 = CARTESIAN_POINT ( 'NONE', ( 4.550000000000003400, -12.53176217742977800, -3.812735851400208100 ) ) ; +#215 = CARTESIAN_POINT ( 'NONE', ( -3.102327836895336400, 7.369860914862933000, 8.808756189270614100 ) ) ; +#216 = FACE_OUTER_BOUND ( 'NONE', #1234, .T. ) ; +#217 = EDGE_CURVE ( 'NONE', #2574, #1690, #3227, .T. ) ; +#218 = VECTOR ( 'NONE', #2599, 1000.000000000000000 ) ; +#219 = CARTESIAN_POINT ( 'NONE', ( 4.574043221016929700, -12.54581189357006500, -4.345631745178455000 ) ) ; +#220 = CARTESIAN_POINT ( 'NONE', ( -1.623328805156081700, 7.671991147934179800, -9.993924375833140400 ) ) ; +#221 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#222 = AXIS2_PLACEMENT_3D ( 'NONE', #4020, #4114, #2310 ) ; +#223 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.337451350268914000E-032, 0.0000000000000000000 ) ) ; +#224 = CARTESIAN_POINT ( 'NONE', ( 5.042757797226221900, 3.477953239174909900, -12.79188281120301000 ) ) ; +#225 = CARTESIAN_POINT ( 'NONE', ( -3.379645087678279300, 7.300111582243339100, 9.120371678760900400 ) ) ; +#226 = AXIS2_PLACEMENT_3D ( 'NONE', #272, #1888, #908 ) ; +#227 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.499997531949971700, -15.18694403236027300 ) ) ; +#228 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#229 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#230 = CARTESIAN_POINT ( 'NONE', ( 4.620689655172414600, 5.157631858570337800, 15.00001676643945100 ) ) ; +#231 = CARTESIAN_POINT ( 'NONE', ( 5.240811529543597300, 4.093044906001538600, -14.73546389058926400 ) ) ; +#232 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000004400, 8.499997531949970800, 6.500016766439446600 ) ) ; +#233 = CARTESIAN_POINT ( 'NONE', ( -3.691260577169077200, 7.369860914863032500, 9.397688929544116800 ) ) ; +#234 = ORIENTED_EDGE ( 'NONE', *, *, #1406, .F. ) ; +#235 = AXIS2_PLACEMENT_3D ( 'NONE', #3192, #3202, #3533 ) ; +#236 = ORIENTED_EDGE ( 'NONE', *, *, #3332, .F. ) ; +#237 = ORIENTED_EDGE ( 'NONE', *, *, #646, .T. ) ; +#238 = CARTESIAN_POINT ( 'NONE', ( 4.412755144117701500, 4.736752185562158600, 15.00001676643945500 ) ) ; +#239 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, -6.631762177429775000, 12.50001676643945100 ) ) ; +#240 = EDGE_CURVE ( 'NONE', #4086, #1498, #3697, .T. ) ; +#241 = ORIENTED_EDGE ( 'NONE', *, *, #622, .F. ) ; +#242 = CIRCLE ( 'NONE', #3953, 6.000000000000000000 ) ; +#243 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995600, 12.49999753194997300, 6.500016766439452800 ) ) ; +#244 = ORIENTED_EDGE ( 'NONE', *, *, #761, .F. ) ; +#245 = CARTESIAN_POINT ( 'NONE', ( 7.115607587768039400, 8.054510599742881600, -9.788036085774424000 ) ) ; +#246 = CIRCLE ( 'NONE', #2969, 27.25000000000000000 ) ; +#247 = ORIENTED_EDGE ( 'NONE', *, *, #2288, .T. ) ; +#248 = AXIS2_PLACEMENT_3D ( 'NONE', #4095, #1765, #4009 ) ; +#249 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 2.715916581326906600, -15.40272833127762900 ) ) ; +#250 = CARTESIAN_POINT ( 'NONE', ( -1.787153754581969100, 6.994162334328129800, 9.715772797762051400 ) ) ; +#251 = VERTEX_POINT ( 'NONE', #455 ) ; +#252 = VECTOR ( 'NONE', #3544, 1000.000000000000000 ) ; +#253 = ORIENTED_EDGE ( 'NONE', *, *, #1927, .T. ) ; +#254 = ORIENTED_EDGE ( 'NONE', *, *, #3781, .T. ) ; +#255 = CARTESIAN_POINT ( 'NONE', ( 4.198558610907505300, 4.318141957637992700, 15.00001676643945100 ) ) ; +#256 = FACE_OUTER_BOUND ( 'NONE', #1139, .T. ) ; +#257 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.559374635020934700E-016 ) ) ; +#258 = DATE_AND_TIME ( #3636, #2738 ) ; +#259 = CARTESIAN_POINT ( 'NONE', ( 3.949748763732284100, 3.663957047336033700, 15.00001676643944900 ) ) ; +#260 = CARTESIAN_POINT ( 'NONE', ( 2.924435735926795400, 3.673109000405518900, -12.71434010089281100 ) ) ; +#261 = FACE_OUTER_BOUND ( 'NONE', #1527, .T. ) ; +#262 = EDGE_CURVE ( 'NONE', #2923, #884, #3166, .T. ) ; +#263 = CARTESIAN_POINT ( 'NONE', ( -2.332219234744781700, 6.776139548260786700, 10.16779753169481300 ) ) ; +#264 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2136, #2247, #2192, #2119 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0006287512979031329200 ), + .UNSPECIFIED. ) ; +#265 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2621, #2341, #2231, #2172 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.002895758152523228400, 0.002960772241395674300 ), + .UNSPECIFIED. ) ; +#266 = CARTESIAN_POINT ( 'NONE', ( 3.879035494562312400, 3.441465497505340000, 15.00001676643944400 ) ) ; +#267 = CIRCLE ( 'NONE', #317, 1.000000000000000700 ) ; +#268 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 7.499997531949972500, -14.99998323356054700 ) ) ; +#269 = EDGE_CURVE ( 'NONE', #193, #624, #3113, .T. ) ; +#270 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -13.13176217742977800, -2.047733685261128700E-015 ) ) ; +#271 = AXIS2_PLACEMENT_3D ( 'NONE', #2036, #1770, #1753 ) ; +#272 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 2.715916581326906600, -15.40272833127762900 ) ) ; +#273 = CARTESIAN_POINT ( 'NONE', ( 3.778910654700526500, 2.981514080222995600, 15.00001676643945100 ) ) ; +#274 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1489498309777774200, 0.9888447541710940800 ) ) ; +#275 = CARTESIAN_POINT ( 'NONE', ( -2.784243968677280600, 6.994162334328081000, 10.71286301185748300 ) ) ; +#276 = DIRECTION ( 'NONE', ( -1.337451350268914000E-032, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#277 = ORIENTED_EDGE ( 'NONE', *, *, #3286, .T. ) ; +#278 = ORIENTED_EDGE ( 'NONE', *, *, #312, .T. ) ; +#279 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#280 = DIRECTION ( 'NONE', ( 0.1473245215649236800, 0.9780546869635321500, 0.1473245215649237900 ) ) ; +#281 = ORIENTED_EDGE ( 'NONE', *, *, #1350, .F. ) ; +#282 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.243794116878614100E-016 ) ) ; +#283 = CARTESIAN_POINT ( 'NONE', ( -1.366657611665676300, 6.839155526726772300, 10.00577013770461400 ) ) ; +#284 = VECTOR ( 'NONE', #1864, 1000.000000000000000 ) ; +#285 = ORIENTED_EDGE ( 'NONE', *, *, #1551, .T. ) ; +#286 = ORIENTED_EDGE ( 'NONE', *, *, #2993, .T. ) ; +#287 = CIRCLE ( 'NONE', #2796, 2.249999999999999600 ) ; +#288 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -10.48186707534378200, -10.77203695102143400 ) ) ; +#289 = EDGE_CURVE ( 'NONE', #1690, #1230, #3118, .T. ) ; +#290 = ORIENTED_EDGE ( 'NONE', *, *, #3603, .T. ) ; +#291 = AXIS2_PLACEMENT_3D ( 'NONE', #1766, #3142, #483 ) ; +#292 = CARTESIAN_POINT ( 'NONE', ( 7.504909037340882900, 7.401176865533063400, -8.824092332035666800 ) ) ; +#293 = EDGE_LOOP ( 'NONE', ( #3511, #3532, #3569, #3581 ) ) ; +#294 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#295 = LINE ( 'NONE', #880, #252 ) ; +#296 = ORIENTED_EDGE ( 'NONE', *, *, #2127, .F. ) ; +#297 = CARTESIAN_POINT ( 'NONE', ( 2.830875532259569100, 3.579883806538859000, -15.00376507616815400 ) ) ; +#298 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1142, #906, #582 ), + ( #2528, #2538, #2135 ), + ( #1550, #292, #3884 ), + ( #2860, #4197, #213 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 7.795302879636166100E-005 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7079954253479490100, 1.000000000000000000), + ( 1.000000000000000000, 0.7089372866283407700, 1.000000000000000000), + ( 1.000000000000000000, 0.7099301615776102400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#299 = ORIENTED_EDGE ( 'NONE', *, *, #4200, .F. ) ; +#300 = EDGE_LOOP ( 'NONE', ( #618, #663, #1170, #1681, #3750, #325, #936, #3362 ) ) ; +#301 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#302 = CARTESIAN_POINT ( 'NONE', ( 6.175210994631164000, 6.747595387856067700, -10.47242612937174600 ) ) ; +#303 = VERTEX_POINT ( 'NONE', #4143 ) ; +#304 = FACE_OUTER_BOUND ( 'NONE', #2465, .T. ) ; +#305 = CARTESIAN_POINT ( 'NONE', ( 1.250000000000000700, 2.499997531949969400, 15.00001676643945100 ) ) ; +#306 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -11.63176217742977600, 7.500016766439451000 ) ) ; +#307 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#308 = CARTESIAN_POINT ( 'NONE', ( 1.250000000000000700, 1.182853392398731200E-015, 14.00001676643945100 ) ) ; +#309 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000002700, 12.49999753194997600, -8.999983233560550700 ) ) ; +#310 = CARTESIAN_POINT ( 'NONE', ( 6.327270281075348300, 6.722941209239923700, -10.51212648991947600 ) ) ; +#311 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #459, #596, #693, #153, #1420, #94, #4212, #4199, #4190, #4176 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0004984108147902890800, 0.0009968216295805781600, 0.001495232444370867100, 0.001993643259161158500 ), + .UNSPECIFIED. ) ; +#312 = EDGE_CURVE ( 'NONE', #2574, #1693, #2999, .T. ) ; +#313 = CIRCLE ( 'NONE', #552, 1.200000000000011700 ) ; +#314 = AXIS2_PLACEMENT_3D ( 'NONE', #1117, #1102, #1093 ) ; +#315 = CARTESIAN_POINT ( 'NONE', ( 3.749999999999999600, 2.499997531949969400, 15.00001676643945100 ) ) ; +#316 = CARTESIAN_POINT ( 'NONE', ( 4.620689655172414600, 5.157631858570337800, 15.00001676643945100 ) ) ; +#317 = AXIS2_PLACEMENT_3D ( 'NONE', #1253, #1242, #1177 ) ; +#318 = PERSON_AND_ORGANIZATION ( #1256, #2848 ) ; +#319 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000001800, 2.741099796833881700, 15.00001676643945100 ) ) ; +#320 = CARTESIAN_POINT ( 'NONE', ( -0.01277841427387522500, 2.857238143957334200, -15.09560685253280500 ) ) ; +#321 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#322 = ORIENTED_EDGE ( 'NONE', *, *, #806, .F. ) ; +#323 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 9.999997531949969000, 12.50001676643944900 ) ) ; +#324 = CARTESIAN_POINT ( 'NONE', ( 5.448242016727586900, 3.737470172038991100, 15.00001676643945500 ) ) ; +#325 = ORIENTED_EDGE ( 'NONE', *, *, #1539, .T. ) ; +#326 = ORIENTED_EDGE ( 'NONE', *, *, #4022, .T. ) ; +#327 = EDGE_CURVE ( 'NONE', #2207, #882, #3108, .T. ) ; +#328 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#329 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#330 = DIRECTION ( 'NONE', ( 3.469446951953614200E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#331 = ORIENTED_EDGE ( 'NONE', *, *, #2346, .T. ) ; +#332 = ORIENTED_EDGE ( 'NONE', *, *, #1025, .F. ) ; +#333 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#334 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 2.499997531949969400, 7.500016766439451000 ) ) ; +#335 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#336 = EDGE_CURVE ( 'NONE', #1185, #1334, #3055, .T. ) ; +#337 = EDGE_LOOP ( 'NONE', ( #2038, #2096, #2117, #2197 ) ) ; +#338 = VECTOR ( 'NONE', #2833, 1000.000000000000000 ) ; +#339 = VERTEX_POINT ( 'NONE', #4068 ) ; +#340 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#341 = EDGE_CURVE ( 'NONE', #80, #3607, #2891, .T. ) ; +#342 = FACE_OUTER_BOUND ( 'NONE', #425, .T. ) ; +#343 = VERTEX_POINT ( 'NONE', #4047 ) ; +#344 = AXIS2_PLACEMENT_3D ( 'NONE', #2392, #2382, #2378 ) ; +#345 = LINE ( 'NONE', #2435, #384 ) ; +#346 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995600, -14.13276217742979000, 7.500016766439448400 ) ) ; +#347 = CARTESIAN_POINT ( 'NONE', ( 5.007485839364553800, 2.924157544190340500, -12.82715476906317400 ) ) ; +#348 = PERSON_AND_ORGANIZATION ( #1256, #2848 ) ; +#349 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#350 = FACE_OUTER_BOUND ( 'NONE', #3210, .T. ) ; +#351 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000700, 9.999997531949969000, 12.50001676643945100 ) ) ; +#352 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.631762177429775000, 12.50001676643945100 ) ) ; +#353 = VECTOR ( 'NONE', #2402, 1000.000000000000000 ) ; +#354 = CARTESIAN_POINT ( 'NONE', ( 7.499253340664302500, 8.369912996715054700, -9.038619501124868400 ) ) ; +#355 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999600, 7.499997531949970800, 2.891205507869056700E-015 ) ) ; +#356 = CARTESIAN_POINT ( 'NONE', ( 5.055776229144529800, 3.244746686838861500, -15.00376507616815400 ) ) ; +#357 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2454, #2469, #2348, #2340, #2339, #2337, #2334, #2329, #2313, #2296 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 1.226634733346699300E-018, 0.0006275151439177991600, 0.001255030287835597200, 0.001882545431753395200, 0.002510060575671193200 ), + .UNSPECIFIED. ) ; +#358 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#359 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#360 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#361 = CARTESIAN_POINT ( 'NONE', ( 7.493829217918371200, 8.310518699288371300, -9.178904086456263700 ) ) ; +#362 = CARTESIAN_POINT ( 'NONE', ( -2.001724285054232100, 6.557585636363734600, 10.49829248138561900 ) ) ; +#363 = AXIS2_PLACEMENT_3D ( 'NONE', #270, #456, #257 ) ; +#364 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#366 = ORIENTED_EDGE ( 'NONE', *, *, #1764, .F. ) ; +#367 = VECTOR ( 'NONE', #672, 1000.000000000000000 ) ; +#368 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#369 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#370 = ORIENTED_EDGE ( 'NONE', *, *, #1011, .T. ) ; +#371 = ORIENTED_EDGE ( 'NONE', *, *, #1161, .T. ) ; +#372 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996900, 7.404783783242379500, -8.805759462705077900 ) ) ; +#373 = CARTESIAN_POINT ( 'NONE', ( -2.494246628734992500, 6.839155526726875300, 11.13335915477404300 ) ) ; +#374 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000014700, -6.631762177429776800, 7.500016766439451900 ) ) ; +#375 = CARTESIAN_POINT ( 'NONE', ( -0.5775740095500825300, 6.475535660198608500, 10.54996572537031700 ) ) ; +#376 = FACE_OUTER_BOUND ( 'NONE', #3619, .T. ) ; +#377 = VERTEX_POINT ( 'NONE', #4057 ) ; +#378 = ORIENTED_EDGE ( 'NONE', *, *, #3122, .T. ) ; +#379 = FACE_OUTER_BOUND ( 'NONE', #2167, .T. ) ; +#380 = EDGE_CURVE ( 'NONE', #1996, #3723, #3067, .T. ) ; +#381 = ORIENTED_EDGE ( 'NONE', *, *, #3939, .T. ) ; +#382 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#383 = ORIENTED_EDGE ( 'NONE', *, *, #4161, .F. ) ; +#384 = VECTOR ( 'NONE', #173, 1000.000000000000000 ) ; +#385 = TOROIDAL_SURFACE ( 'NONE', #3956, 2.000000000000000000, 1.000000000000000000 ) ; +#386 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#387 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 9.099997531949975700, -4.999983233560546300 ) ) ; +#388 = ORIENTED_EDGE ( 'NONE', *, *, #497, .F. ) ; +#389 = AXIS2_PLACEMENT_3D ( 'NONE', #1519, #3516, #1191 ) ; +#390 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#391 = CARTESIAN_POINT ( 'NONE', ( -1.410086907651223700, 6.065490206091141100, 11.08992985878782100 ) ) ; +#392 = FACE_OUTER_BOUND ( 'NONE', #144, .T. ) ; +#393 = ORIENTED_EDGE ( 'NONE', *, *, #3109, .T. ) ; +#394 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#395 = CARTESIAN_POINT ( 'NONE', ( -1.950051041068980400, 6.475535660198505500, 11.92244275688910100 ) ) ; +#396 = EDGE_CURVE ( 'NONE', #1999, #1625, #615, .T. ) ; +#397 = AXIS2_PLACEMENT_3D ( 'NONE', #3548, #1218, #4188 ) ; +#398 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -6.631762177429777700, 15.00001676643945100 ) ) ; +#399 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1962, #997, ( #689 ) ) ; +#400 = FACE_OUTER_BOUND ( 'NONE', #185, .T. ) ; +#401 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -12.62837651615604200, -11.44657176888025800 ) ) ; +#402 = CARTESIAN_POINT ( 'NONE', ( 6.479471955880463900, 6.712272837560918000, -10.55494584908579500 ) ) ; +#403 = CARTESIAN_POINT ( 'NONE', ( -2.496452072160020300, 8.339239060826550100, -9.111068966024406600 ) ) ; +#404 = CARTESIAN_POINT ( 'NONE', ( -0.2090060575804175100, 6.266931590423053100, 10.80415051983184100 ) ) ; +#405 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -13.13176217742977600, -12.24597178207973200 ) ) ; +#406 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.927470528863118600E-016 ) ) ; +#407 = CARTESIAN_POINT ( 'NONE', ( -1.149272600709724300, 5.788275814531681700, 11.35074416572843200 ) ) ; +#408 = EDGE_CURVE ( 'NONE', #772, #3158, #2948, .T. ) ; +#409 = CIRCLE ( 'NONE', #481, 1.200000000000011700 ) ; +#410 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.927470528863119000E-016, -1.000000000000000000 ) ) ; +#411 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999996200, 8.499997531949969000, 6.500016766439451000 ) ) ; +#412 = EDGE_CURVE ( 'NONE', #3265, #2350, #2881, .T. ) ; +#413 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -5.711846095760983600, -9.273070689112938000 ) ) ; +#414 = CARTESIAN_POINT ( 'NONE', ( 6.631869188944572000, 6.714409161062627100, -10.60038814472224500 ) ) ; +#415 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.452896807675744000, -16.41292689845144500 ) ) ; +#416 = CARTESIAN_POINT ( 'NONE', ( -1.695866246607327300, 6.266931590422768000, 12.29101070885853100 ) ) ; +#417 = EDGE_CURVE ( 'NONE', #1896, #3536, #2578, .T. ) ; +#418 = DIRECTION ( 'NONE', ( 0.8965517241379311600, -0.4429390544367285400, 0.0000000000000000000 ) ) ; +#419 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, -13.88176217742977400, -3.277205641478955200 ) ) ; +#420 = CARTESIAN_POINT ( 'NONE', ( 0.4620543847853461100, 5.804131285342363900, 11.26695082491253100 ) ) ; +#421 = EDGE_LOOP ( 'NONE', ( #2154, #2203, #2276, #2328 ) ) ; +#422 = FACE_OUTER_BOUND ( 'NONE', #3326, .T. ) ; +#423 = AXIS2_PLACEMENT_3D ( 'NONE', #830, #644, #613 ) ; +#424 = PLANE ( 'NONE', #1648 ) ; +#425 = EDGE_LOOP ( 'NONE', ( #2092, #3576, #3311 ) ) ; +#426 = VERTEX_POINT ( 'NONE', #2823 ) ; +#427 = DIRECTION ( 'NONE', ( -0.4429390544367285400, -0.8965517241379310500, -3.841883880791806200E-016 ) ) ; +#428 = ORIENTED_EDGE ( 'NONE', *, *, #2127, .T. ) ; +#429 = CARTESIAN_POINT ( 'NONE', ( -0.7094029485828651200, 5.209499959167875000, 11.79061381785793800 ) ) ; +#430 = FACE_OUTER_BOUND ( 'NONE', #3119, .T. ) ; +#431 = ORIENTED_EDGE ( 'NONE', *, *, #3868, .T. ) ; +#432 = CARTESIAN_POINT ( 'NONE', ( 4.620689655172413700, 5.157631858570338700, 14.00001676643945100 ) ) ; +#433 = ORIENTED_EDGE ( 'NONE', *, *, #1569, .T. ) ; +#434 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 1.671814187836143500E-031, 12.50001676643945100 ) ) ; +#435 = CARTESIAN_POINT ( 'NONE', ( -1.233065941527205400, 5.804131285342647200, 12.96207115122530400 ) ) ; +#436 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1439, #3918, #3382 ), + ( #3537, #3407, #3423 ), + ( #3651, #3441, #3145 ), + ( #3206, #3074, #3087 ), + ( #3281, #2861, #2675 ), + ( #2921, #3035, #2283 ), + ( #2143, #2294, #2248 ), + ( #2129, #2235, #2746 ), + ( #1955, #1937, #2009 ), + ( #1829, #1839, #1654 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 1.952371595303604900, 2.212300316989008800, 2.472229038674412600, 2.732157760359815900, 2.992086482045219800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9647100528786758400, 1.000000000000000000), + ( 1.000000000000000000, 0.9492238029783559600, 1.000000000000000000), + ( 1.000000000000000000, 0.9289904949431336800, 1.000000000000000000), + ( 1.000000000000000000, 0.8831442196868987100, 1.000000000000000000), + ( 1.000000000000000000, 0.8574986255077435800, 1.000000000000000000), + ( 1.000000000000000000, 0.8068355824338329100, 1.000000000000000000), + ( 1.000000000000000000, 0.7818639211415522300, 1.000000000000000000), + ( 1.000000000000000000, 0.7402901044749506900, 1.000000000000000000), + ( 1.000000000000000000, 0.7237754572980547000, 1.000000000000000000), + ( 1.000000000000000000, 0.7149077045844130000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#437 = CIRCLE ( 'NONE', #585, 2.249999999999998700 ) ; +#438 = VECTOR ( 'NONE', #382, 1000.000000000000000 ) ; +#439 = EDGE_LOOP ( 'NONE', ( #1267, #2613 ) ) ; +#440 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #689 ) ; +#441 = FACE_OUTER_BOUND ( 'NONE', #92, .T. ) ; +#442 = ORIENTED_EDGE ( 'NONE', *, *, #761, .T. ) ; +#443 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669293900, 0.9848077530122082400 ) ) ; +#444 = EDGE_LOOP ( 'NONE', ( #3931, #182, #43, #101 ) ) ; +#445 = EDGE_CURVE ( 'NONE', #488, #1625, #2830, .T. ) ; +#446 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -4.452896807675744900, -16.41292689845144900 ) ) ; +#447 = TOROIDAL_SURFACE ( 'NONE', #512, 7.249999999999999100, 2.250000000000000000 ) ; +#448 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.499997531949970300, 2.891202939038461200E-016 ) ) ; +#449 = CARTESIAN_POINT ( 'NONE', ( 0.7645302861047447200, 5.549946490731908700, 11.47555489478760300 ) ) ; +#450 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#451 = CARTESIAN_POINT ( 'NONE', ( 7.389277050840284700, 8.247747006236588500, -9.457352151229407900 ) ) ; +#452 = CARTESIAN_POINT ( 'NONE', ( -0.5334088802254373100, 4.906485482231809100, 11.96660788621499400 ) ) ; +#453 = CIRCLE ( 'NONE', #2188, 4.999999999999999100 ) ; +#454 = CARTESIAN_POINT ( 'NONE', ( -1.175210994631166000, 7.597114959037288200, -9.999983233560549000 ) ) ; +#455 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999996200, 8.416077315049584200, 7.500016766439451000 ) ) ; +#456 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.559374635020935700E-016, -1.000000000000000000 ) ) ; +#457 = CIRCLE ( 'NONE', #684, 5.000000000000000000 ) ; +#458 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#459 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000004400, 7.430064017866316200, 8.333350099772783200 ) ) ; +#460 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122082400, -0.1736481776669296100 ) ) ; +#461 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#462 = CARTESIAN_POINT ( 'NONE', ( -1.024461871651813700, 5.549946490731853600, 13.26454705254396100 ) ) ; +#463 = EDGE_CURVE ( 'NONE', #1960, #1938, #2778, .T. ) ; +#464 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.499997531949969000, 14.00001676643945100 ) ) ; +#465 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 7.499997531949971700, -7.834640608427721800 ) ) ; +#466 = EDGE_CURVE ( 'NONE', #1952, #560, #2771, .T. ) ; +#467 = CARTESIAN_POINT ( 'NONE', ( -2.389277050839124300, 8.247747006235787400, -9.457352151231297900 ) ) ; +#468 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000001100, 9.999997531949969000, 12.50001676643944700 ) ) ; +#469 = VERTEX_POINT ( 'NONE', #3347 ) ; +#470 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#471 = CIRCLE ( 'NONE', #1778, 1.000000000000000900 ) ; +#472 = EDGE_CURVE ( 'NONE', #3672, #1484, #2785, .T. ) ; +#473 = ORIENTED_EDGE ( 'NONE', *, *, #3085, .F. ) ; +#474 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 7.499997531949969900, 7.500016766439451900 ) ) ; +#475 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#476 = ORIENTED_EDGE ( 'NONE', *, *, #3993, .F. ) ; +#477 = EDGE_LOOP ( 'NONE', ( #521, #1115, #1130, #1219, #1278, #1329, #1434, #1740 ) ) ; +#478 = CC_DESIGN_APPROVAL ( #600, ( #689 ) ) ; +#479 = CIRCLE ( 'NONE', #3541, 0.9999999999999991100 ) ; +#480 = ORIENTED_EDGE ( 'NONE', *, *, #1898, .F. ) ; +#481 = AXIS2_PLACEMENT_3D ( 'NONE', #2023, #1995, #1976 ) ; +#482 = CARTESIAN_POINT ( 'NONE', ( 7.455935959551393200, 8.287675574974803900, -9.327745097796526600 ) ) ; +#483 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#484 = ORIENTED_EDGE ( 'NONE', *, *, #2270, .T. ) ; +#485 = CARTESIAN_POINT ( 'NONE', ( 9.232659125071870000E-017, -13.21766908869830300, -12.11341366072696200 ) ) ; +#486 = DIRECTION ( 'NONE', ( -1.000000000000000000, -5.731934358295345600E-033, 4.956352788505163400E-017 ) ) ; +#487 = EDGE_LOOP ( 'NONE', ( #3997, #4136, #299, #1138, #1540 ) ) ; +#488 = VERTEX_POINT ( 'NONE', #2053 ) ; +#489 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#490 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #323, #58, #85 ), + ( #12, #4198, #4172 ), + ( #4165, #4159, #4152 ), + ( #4137, #4110, #4090 ), + ( #4066, #4060, #4006 ), + ( #3961, #3950, #2416 ), + ( #2410, #2404, #3887 ), + ( #3873, #3854, #3810 ), + ( #3799, #3784, #3751 ), + ( #3744, #3729, #3716 ), + ( #3704, #3695, #3690 ), + ( #3669, #3654, #3653 ), + ( #3646, #3633, #3608 ), + ( #3601, #3593, #3586 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 1.570796326794896600, 1.963495408493620700, 2.356194490192344800, 2.552544031041707100, 2.748893571891069000, 2.945243112740430800, 3.141592653589793100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000), + ( 1.000000000000000000, 1.000158583040944300, 1.000000000000000000), + ( 1.000000000000000000, 0.9867291862307087100, 1.000000000000000000), + ( 1.000000000000000000, 0.9386556535316040700, 1.000000000000000000), + ( 1.000000000000000000, 0.9038128836971752700, 1.000000000000000000), + ( 1.000000000000000000, 0.8471316638280697000, 1.000000000000000000), + ( 1.000000000000000000, 0.8275942648708872800, 1.000000000000000000), + ( 1.000000000000000000, 0.7902180133724539000, 1.000000000000000000), + ( 1.000000000000000000, 0.7723968163673071700, 1.000000000000000000), + ( 1.000000000000000000, 0.7418334233298986600, 1.000000000000000000), + ( 1.000000000000000000, 0.7291288899781677200, 1.000000000000000000), + ( 1.000000000000000000, 0.7117460065651491900, 1.000000000000000000), + ( 1.000000000000000000, 0.7070717253461067400, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#491 = ORIENTED_EDGE ( 'NONE', *, *, #4081, .F. ) ; +#492 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 8.499997531949969000, 15.00001676643945100 ) ) ; +#493 = CARTESIAN_POINT ( 'NONE', ( 1.291779092282164400, 5.005750903364043000, 11.83917476111675500 ) ) ; +#494 = CIRCLE ( 'NONE', #625, 1.000000000000000000 ) ; +#495 = ORIENTED_EDGE ( 'NONE', *, *, #1463, .T. ) ; +#496 = EDGE_LOOP ( 'NONE', ( #3054, #112, #4146, #3525 ) ) ; +#497 = EDGE_CURVE ( 'NONE', #578, #1996, #2728, .T. ) ; +#498 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#499 = CARTESIAN_POINT ( 'NONE', ( 7.292740349116786400, 7.524588717680944500, 7.115727196205993400 ) ) ; +#500 = FACE_OUTER_BOUND ( 'NONE', #1179, .T. ) ; +#501 = EDGE_CURVE ( 'NONE', #488, #2163, #1052, .T. ) ; +#502 = CARTESIAN_POINT ( 'NONE', ( 8.500000000000001800, 2.499997531949971200, -7.834640608427721800 ) ) ; +#503 = AXIS2_PLACEMENT_3D ( 'NONE', #1831, #1819, #1802 ) ; +#504 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#505 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#506 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -4.843605207426335800, -14.19710945417398000 ) ) ; +#507 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000004400, 7.430064017866317100, 8.333350099772779600 ) ) ; +#508 = CARTESIAN_POINT ( 'NONE', ( 7.469852177309277900, 6.961654659354685700, -9.300687349425571100 ) ) ; +#509 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000003600, 8.385741033500860200, -8.999983233560552500 ) ) ; +#510 = DIRECTION ( 'NONE', ( 1.156482317317871500E-016, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#511 = CARTESIAN_POINT ( 'NONE', ( -0.2631598556722423700, 4.314800233154242500, 12.23685691076618700 ) ) ; +#512 = AXIS2_PLACEMENT_3D ( 'NONE', #3071, #2069, #4037 ) ; +#513 = ORIENTED_EDGE ( 'NONE', *, *, #1096, .T. ) ; +#514 = CARTESIAN_POINT ( 'NONE', ( 9.031713865609740200, 7.429430857516484500, -9.238655503293591300 ) ) ; +#515 = CARTESIAN_POINT ( 'NONE', ( -1.785629346568799800, 7.780935810592394500, -9.959787805782779600 ) ) ; +#516 = AXIS2_PLACEMENT_3D ( 'NONE', #4202, #4193, #4166 ) ; +#517 = ORIENTED_EDGE ( 'NONE', *, *, #3500, .F. ) ; +#518 = VECTOR ( 'NONE', #1277, 999.9999999999998900 ) ; +#519 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.672504536910174100, -15.15652639302458300 ) ) ; +#520 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#521 = ORIENTED_EDGE ( 'NONE', *, *, #3310, .T. ) ; +#522 = CARTESIAN_POINT ( 'NONE', ( 8.565461751399956500, 7.289788760521789300, -9.914721068897783600 ) ) ; +#523 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000002700, 8.380597213683566700, -9.012973063079286400 ) ) ; +#524 = ORIENTED_EDGE ( 'NONE', *, *, #1826, .F. ) ; +#525 = EDGE_LOOP ( 'NONE', ( #3795, #3570, #2212, #331 ) ) ; +#526 = CARTESIAN_POINT ( 'NONE', ( -0.6608420053227332900, 5.005750903364097200, 13.79179585872185100 ) ) ; +#527 = FACE_OUTER_BOUND ( 'NONE', #1490, .T. ) ; +#528 = TOROIDAL_SURFACE ( 'NONE', #3920, 7.249999999999999100, 2.250000000000000000 ) ; +#529 = EDGE_LOOP ( 'NONE', ( #1164, #150, #281, #495, #537, #670, #1006, #1122 ) ) ; +#530 = ORIENTED_EDGE ( 'NONE', *, *, #2153, .T. ) ; +#531 = LINE ( 'NONE', #769, #580 ) ; +#532 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, -10.48186707534378200, -10.77203695102143400 ) ) ; +#533 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999998200, 7.499997531949970800, -7.834640608427721800 ) ) ; +#534 = VERTEX_POINT ( 'NONE', #1558 ) ; +#535 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#536 = CIRCLE ( 'NONE', #642, 2.250000000000000400 ) ; +#537 = ORIENTED_EDGE ( 'NONE', *, *, #1470, .F. ) ; +#538 = ORIENTED_EDGE ( 'NONE', *, *, #1791, .T. ) ; +#539 = EDGE_CURVE ( 'NONE', #193, #1171, #2679, .T. ) ; +#540 = FACE_OUTER_BOUND ( 'NONE', #3678, .T. ) ; +#541 = CARTESIAN_POINT ( 'NONE', ( 7.115607587768782800, 8.054510599743489200, -9.788036085773843100 ) ) ; +#542 = ORIENTED_EDGE ( 'NONE', *, *, #269, .F. ) ; +#543 = CARTESIAN_POINT ( 'NONE', ( 1.516538963639835400, 4.715753562953457500, 11.99418156894979500 ) ) ; +#544 = EDGE_CURVE ( 'NONE', #1291, #3463, #2724, .T. ) ; +#545 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999300, -2.340539862970598800E-031, 15.00001676643945100 ) ) ; +#546 = EDGE_CURVE ( 'NONE', #3424, #3853, #2674, .T. ) ; +#547 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 9.099997531949975700, -1.809983233560551500 ) ) ; +#548 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 8.416077315049584200, 8.500016766439449300 ) ) ; +#549 = FACE_OUTER_BOUND ( 'NONE', #2261, .T. ) ; +#550 = CARTESIAN_POINT ( 'NONE', ( 7.421686170597220100, 6.847878330210488900, -9.548934993107913300 ) ) ; +#551 = CARTESIAN_POINT ( 'NONE', ( -0.1731305897864112400, 4.028858859704528500, 12.32688617665368900 ) ) ; +#552 = AXIS2_PLACEMENT_3D ( 'NONE', #2178, #2160, #2114 ) ; +#553 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #188, #508, #110 ), + ( #91, #75, #63 ), + ( #50, #30, #17 ), + ( #6, #175, #567 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0008814880843609324500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.6102702726634992000, 1.000000000000000000), + ( 1.000000000000000000, 0.6099960423271508800, 1.000000000000000000), + ( 1.000000000000000000, 0.6114999317983188500, 1.000000000000000000), + ( 1.000000000000000000, 0.6193624979933688400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#554 = CARTESIAN_POINT ( 'NONE', ( 0.4499999999999840200, -12.53176217742979200, 7.500016766439451000 ) ) ; +#555 = CARTESIAN_POINT ( 'NONE', ( 8.109345979614893500, 7.128758421778007600, -10.57608893798738600 ) ) ; +#556 = CARTESIAN_POINT ( 'NONE', ( -0.5058351974897525900, 4.715753562953691100, 14.01655573007972700 ) ) ; +#557 = EDGE_LOOP ( 'NONE', ( #332, #371, #442, #480 ) ) ; +#558 = DESIGN_CONTEXT ( 'detailed design', #1098, 'design' ) ; +#559 = ORIENTED_EDGE ( 'NONE', *, *, #2298, .F. ) ; +#560 = VERTEX_POINT ( 'NONE', #4177 ) ; +#561 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#562 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#563 = ORIENTED_EDGE ( 'NONE', *, *, #2698, .T. ) ; +#564 = CYLINDRICAL_SURFACE ( 'NONE', #3505, 5.000000000000000000 ) ; +#565 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 7.499997531949971700, -7.834640608427721800 ) ) ; +#566 = EDGE_LOOP ( 'NONE', ( #3835, #428, #2719, #3606 ) ) ; +#567 = CARTESIAN_POINT ( 'NONE', ( 8.109345979613397800, 7.128758421777396500, -10.57608893798829500 ) ) ; +#568 = ORIENTED_EDGE ( 'NONE', *, *, #3588, .F. ) ; +#569 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 2.499997531949969000, 14.00001676643945100 ) ) ; +#570 = VECTOR ( 'NONE', #2584, 1000.000000000000000 ) ; +#571 = FACE_OUTER_BOUND ( 'NONE', #1726, .T. ) ; +#572 = ORIENTED_EDGE ( 'NONE', *, *, #269, .T. ) ; +#573 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, 2.109289132199380700, -12.97112658808280400 ) ) ; +#574 = CARTESIAN_POINT ( 'NONE', ( 7.025666544409088700, 7.979414194391167400, -9.852403254794614500 ) ) ; +#575 = CARTESIAN_POINT ( 'NONE', ( 1.879714257773828200, 4.111075824597363300, 12.24464728904197700 ) ) ; +#576 = ORIENTED_EDGE ( 'NONE', *, *, #3251, .T. ) ; +#577 = CYLINDRICAL_SURFACE ( 'NONE', #588, 5.000000000000000000 ) ; +#578 = VERTEX_POINT ( 'NONE', #3929 ) ; +#579 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 6.968492461283298100, -37.49998323356054900 ) ) ; +#580 = VECTOR ( 'NONE', #2398, 1000.000000000000000 ) ; +#581 = ORIENTED_EDGE ( 'NONE', *, *, #1551, .F. ) ; +#582 = CARTESIAN_POINT ( 'NONE', ( 8.500000000000001800, 7.404783783242378600, -8.805759462705083300 ) ) ; +#583 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#584 = CYLINDRICAL_SURFACE ( 'NONE', #1736, 1.000000000000000900 ) ; +#585 = AXIS2_PLACEMENT_3D ( 'NONE', #3771, #1432, #3437 ) ; +#586 = CARTESIAN_POINT ( 'NONE', ( 7.371200322015433800, 6.869334738002537600, -9.639347250501655800 ) ) ; +#587 = LINE ( 'NONE', #3176, #1148 ) ; +#588 = AXIS2_PLACEMENT_3D ( 'NONE', #1974, #1749, #1416 ) ; +#589 = CARTESIAN_POINT ( 'NONE', ( -0.5172413793103443100, 4.714692804133610700, 14.00001676643945100 ) ) ; +#590 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#591 = LINE ( 'NONE', #2450, #353 ) ; +#592 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -5.006327233685850000, -16.76436826747344400 ) ) ; +#593 = EDGE_CURVE ( 'NONE', #3853, #2708, #2576, .T. ) ; +#594 = CARTESIAN_POINT ( 'NONE', ( 7.923502099833090300, 7.051517753626830800, -10.66986686524261100 ) ) ; +#595 = CARTESIAN_POINT ( 'NONE', ( -1.383428422772023900, 6.467939620965014000, 12.74404555342001500 ) ) ; +#596 = CARTESIAN_POINT ( 'NONE', ( 6.667822885821454500, 7.430064017866318000, 8.333350099772779600 ) ) ; +#597 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#598 = LOCAL_TIME ( 17, 44, 58.00000000000000000, #4018 ) ; +#599 = CARTESIAN_POINT ( 'NONE', ( 6.930329650243496800, 7.898450498545084700, -9.904284953470991600 ) ) ; +#600 = APPROVAL ( #1071, 'UNSPECIFIED' ) ; +#601 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #609, #602, #595, #589 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.570796326794896600, 2.682718448575683600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8995957488335693000, 0.8995957488335693000, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#602 = CARTESIAN_POINT ( 'NONE', ( -3.044455473534204000, 7.499997531949967200, 10.33555632981485500 ) ) ; +#603 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 7.499997531949970800, 8.673614525627818800E-016 ) ) ; +#604 = VERTEX_POINT ( 'NONE', #3875 ) ; +#605 = CIRCLE ( 'NONE', #2225, 2.249999999999999100 ) ; +#606 = CARTESIAN_POINT ( 'NONE', ( 7.280127524146123200, 6.892614445049972000, -9.737686218742149800 ) ) ; +#607 = EDGE_CURVE ( 'NONE', #98, #2251, #2617, .T. ) ; +#608 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -13.13176217742977800, -2.047733685261128700E-015 ) ) ; +#609 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 7.499997531949969900, 7.500016766439451900 ) ) ; +#610 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#611 = ORIENTED_EDGE ( 'NONE', *, *, #497, .T. ) ; +#612 = CARTESIAN_POINT ( 'NONE', ( 7.713186302315659900, 6.966114733124236100, -10.72374396881179600 ) ) ; +#613 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#614 = ORIENTED_EDGE ( 'NONE', *, *, #3699, .T. ) ; +#615 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #3772, #3982, #4000, #3711 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.712388980384689700, 5.235987755982988800 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9772838841927120600, 0.9772838841927120600, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#616 = EDGE_CURVE ( 'NONE', #80, #2574, #2665, .T. ) ; +#617 = ORIENTED_EDGE ( 'NONE', *, *, #4002, .T. ) ; +#618 = ORIENTED_EDGE ( 'NONE', *, *, #4022, .F. ) ; +#619 = LINE ( 'NONE', #355, #631 ) ; +#620 = CARTESIAN_POINT ( 'NONE', ( 8.500000000000001800, 7.404783783242378600, -8.805759462705083300 ) ) ; +#621 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 7.499997531949971700, -4.999983233560546300 ) ) ; +#622 = EDGE_CURVE ( 'NONE', #1750, #710, #2526, .T. ) ; +#623 = CIRCLE ( 'NONE', #2701, 2.250000000000000400 ) ; +#624 = VERTEX_POINT ( 'NONE', #3726 ) ; +#625 = AXIS2_PLACEMENT_3D ( 'NONE', #3745, #1405, #3405 ) ; +#626 = ORIENTED_EDGE ( 'NONE', *, *, #137, .T. ) ; +#627 = CIRCLE ( 'NONE', #723, 1.000000000000000000 ) ; +#628 = EDGE_LOOP ( 'NONE', ( #1836, #3974, #3992, #767, #2946, #2432, #3933, #1883, #2980, #1020, #254 ) ) ; +#629 = DIRECTION ( 'NONE', ( -1.539512473013105000E-048, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#630 = DIRECTION ( 'NONE', ( 1.000000000000000000, 5.731934358295345000E-033, -4.956352788505163400E-017 ) ) ; +#631 = VECTOR ( 'NONE', #2623, 1000.000000000000000 ) ; +#632 = ORIENTED_EDGE ( 'NONE', *, *, #4008, .F. ) ; +#633 = CARTESIAN_POINT ( 'NONE', ( 6.880848291396675100, 7.856540383169919700, -9.926243548524576400 ) ) ; +#634 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000003600, 8.385741033500860200, -8.999983233560552500 ) ) ; +#635 = VERTEX_POINT ( 'NONE', #3789 ) ; +#636 = LINE ( 'NONE', #989, #570 ) ; +#637 = CARTESIAN_POINT ( 'NONE', ( 4.115303014317094100, 4.099343027359429600, 15.00001676643945100 ) ) ; +#638 = CARTESIAN_POINT ( 'NONE', ( 7.222056523031205300, 6.903018896625178000, -9.787154957887755900 ) ) ; +#639 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999997800, 8.385741033500860200, -8.999983233560549000 ) ) ; +#640 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000003600, 12.49999753194997600, -9.999983233560549000 ) ) ; +#641 = CARTESIAN_POINT ( 'NONE', ( 7.499253340664302500, 8.369912996715054700, -9.038619501124868400 ) ) ; +#642 = AXIS2_PLACEMENT_3D ( 'NONE', #755, #2710, #443 ) ; +#643 = CARTESIAN_POINT ( 'NONE', ( 7.599922697174851500, 6.921638444798383600, -10.73792562222319400 ) ) ; +#644 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#645 = CARTESIAN_POINT ( 'NONE', ( -0.05460992052067680000, 3.505281526329751000, 12.44540684591809700 ) ) ; +#646 = EDGE_CURVE ( 'NONE', #3536, #4086, #2479, .T. ) ; +#647 = AXIS2_PLACEMENT_3D ( 'NONE', #812, #800, #349 ) ; +#648 = CARTESIAN_POINT ( 'NONE', ( 3.749999999999999600, 1.182853392398731000E-015, 14.00001676643945100 ) ) ; +#649 = CARTESIAN_POINT ( 'NONE', ( -0.2553694773973759200, 4.111075824597129700, 14.37973102421283800 ) ) ; +#650 = CARTESIAN_POINT ( 'NONE', ( 6.777343887921733600, 7.774584954525413300, -9.962315795604190800 ) ) ; +#651 = AXIS2_PLACEMENT_3D ( 'NONE', #4163, #4151, #4108 ) ; +#652 = CARTESIAN_POINT ( 'NONE', ( -1.175210994631166800, 6.747595387856067700, -10.47242612937174600 ) ) ; +#653 = CARTESIAN_POINT ( 'NONE', ( 7.499747068990755500, 8.375319335848900000, -9.025850160018951100 ) ) ; +#654 = CARTESIAN_POINT ( 'NONE', ( 7.078245498922745700, 6.920171078256096600, -9.876522497140008700 ) ) ; +#655 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999300, 12.49999753194997300, 15.00001676643945100 ) ) ; +#656 = VERTEX_POINT ( 'NONE', #3715 ) ; +#657 = CARTESIAN_POINT ( 'NONE', ( 2.018120703255632500, 3.796410373515041400, 12.34010001006394600 ) ) ; +#658 = ORIENTED_EDGE ( 'NONE', *, *, #1411, .T. ) ; +#659 = CYLINDRICAL_SURFACE ( 'NONE', #78, 5.000000000000000000 ) ; +#660 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -8.019335917570373600E-017, -1.000000000000000000 ) ) ; +#661 = ORIENTED_EDGE ( 'NONE', *, *, #3724, .T. ) ; +#662 = CARTESIAN_POINT ( 'NONE', ( 7.353818429727742700, 6.837322191050381200, -10.74127412098168400 ) ) ; +#663 = ORIENTED_EDGE ( 'NONE', *, *, #129, .F. ) ; +#664 = EDGE_CURVE ( 'NONE', #132, #2609, #2610, .T. ) ; +#665 = CARTESIAN_POINT ( 'NONE', ( 3.749999999999999600, -6.631762177429777700, 15.00001676643945100 ) ) ; +#666 = CARTESIAN_POINT ( 'NONE', ( 8.134581939338902500, 7.568339933465175300, -5.699973380941655100 ) ) ; +#667 = ORIENTED_EDGE ( 'NONE', *, *, #2490, .F. ) ; +#668 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000004400, 12.49999753194997400, 6.500016766439447500 ) ) ; +#669 = FACE_OUTER_BOUND ( 'NONE', #3261, .T. ) ; +#670 = ORIENTED_EDGE ( 'NONE', *, *, #1520, .T. ) ; +#671 = CARTESIAN_POINT ( 'NONE', ( 6.723835766505570400, 7.734974479397081400, -9.976185321091790600 ) ) ; +#672 = DIRECTION ( 'NONE', ( 6.842277657836020900E-049, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#673 = EDGE_CURVE ( 'NONE', #578, #3584, #2470, .T. ) ; +#674 = ORIENTED_EDGE ( 'NONE', *, *, #1669, .T. ) ; +#675 = FACE_BOUND ( 'NONE', #2770, .T. ) ; +#676 = CARTESIAN_POINT ( 'NONE', ( -0.02860419100256606000, 3.273735928596827700, 12.47141257543688500 ) ) ; +#677 = ORIENTED_EDGE ( 'NONE', *, *, #994, .T. ) ; +#678 = ORIENTED_EDGE ( 'NONE', *, *, #3794, .F. ) ; +#679 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 8.019335917570373600E-017 ) ) ; +#680 = CARTESIAN_POINT ( 'NONE', ( -0.1599167563754907200, 3.796410373514960100, 14.51813746969508400 ) ) ; +#681 = EDGE_CURVE ( 'NONE', #3414, #2708, #2431, .T. ) ; +#682 = FACE_BOUND ( 'NONE', #529, .T. ) ; +#683 = VERTEX_POINT ( 'NONE', #3561 ) ; +#684 = AXIS2_PLACEMENT_3D ( 'NONE', #2327, #2307, #2267 ) ; +#685 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trigger_Guard', ( #1473, #903 ), #1330 ) ; +#686 = CIRCLE ( 'NONE', #912, 1.000000000000000000 ) ; +#687 = ORIENTED_EDGE ( 'NONE', *, *, #956, .T. ) ; +#688 = DIRECTION ( 'NONE', ( -1.710569414459011700E-049, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#689 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #4170, #558 ) ; +#690 = AXIS2_PLACEMENT_3D ( 'NONE', #1153, #1217, #1163 ) ; +#691 = CARTESIAN_POINT ( 'NONE', ( 0.01095477277660802900, -13.31609180314200300, -11.98960238779560700 ) ) ; +#692 = LINE ( 'NONE', #506, #2335 ) ; +#693 = CARTESIAN_POINT ( 'NONE', ( 6.833133939851405700, 7.433086804925950200, 8.316023069471096800 ) ) ; +#694 = CARTESIAN_POINT ( 'NONE', ( 2.203265862591209600, 3.154487910546170900, 12.46778632684726200 ) ) ; +#695 = CARTESIAN_POINT ( 'NONE', ( 6.994774584225869100, 6.926936677159439200, -9.916170314281201200 ) ) ; +#696 = CARTESIAN_POINT ( 'NONE', ( -0.001393557679491189100, 2.858624416241520600, 12.49862320875995900 ) ) ; +#697 = LINE ( 'NONE', #2945, #900 ) ; +#698 = PLANE ( 'NONE', #3970 ) ; +#699 = AXIS2_PLACEMENT_3D ( 'NONE', #2955, #1627, #3963 ) ; +#700 = CARTESIAN_POINT ( 'NONE', ( 3.749999999999999600, 2.499997531949969400, 15.00001676643945100 ) ) ; +#701 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000002700, -14.13276217742978600, -8.999983233560554300 ) ) ; +#702 = CARTESIAN_POINT ( 'NONE', ( -0.03223043959220448600, 3.154487910546251300, 14.70328262903066000 ) ) ; +#703 = EDGE_CURVE ( 'NONE', #656, #2218, #2904, .T. ) ; +#704 = AXIS2_PLACEMENT_3D ( 'NONE', #130, #139, #282 ) ; +#705 = CARTESIAN_POINT ( 'NONE', ( 7.222145643176439500, 6.797947476974215400, -10.73024796954657000 ) ) ; +#706 = CARTESIAN_POINT ( 'NONE', ( -1.500000000000004400, 7.621566414234913500, -9.999983233560552500 ) ) ; +#707 = CARTESIAN_POINT ( 'NONE', ( 2.249999999998763700, 2.827250478211373900, 12.50001676643944900 ) ) ; +#708 = CARTESIAN_POINT ( 'NONE', ( -1.594219528202306400, 6.973409486272673000, -9.999983233560552500 ) ) ; +#709 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#710 = VERTEX_POINT ( 'NONE', #3412 ) ; +#711 = CIRCLE ( 'NONE', #2358, 1.000000000000000000 ) ; +#712 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#713 = ORIENTED_EDGE ( 'NONE', *, *, #4157, .T. ) ; +#714 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#715 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, -6.631762177429775000, 7.500016766439451900 ) ) ; +#716 = ORIENTED_EDGE ( 'NONE', *, *, #2611, .F. ) ; +#717 = CARTESIAN_POINT ( 'NONE', ( 6.614565633342714100, 7.667220957537976400, -9.994944379397043800 ) ) ; +#718 = CARTESIAN_POINT ( 'NONE', ( -1.631869188944610200, 6.714409161062448600, -10.60038814472226100 ) ) ; +#719 = CARTESIAN_POINT ( 'NONE', ( 18.96446609406726900, 7.499997531949968100, 14.00001676643944900 ) ) ; +#720 = ORIENTED_EDGE ( 'NONE', *, *, #1617, .F. ) ; +#721 = VERTEX_POINT ( 'NONE', #3509 ) ; +#722 = FACE_BOUND ( 'NONE', #3309, .T. ) ; +#723 = AXIS2_PLACEMENT_3D ( 'NONE', #3655, #1640, #3996 ) ; +#724 = CYLINDRICAL_SURFACE ( 'NONE', #4063, 25.00000000000000000 ) ; +#725 = ORIENTED_EDGE ( 'NONE', *, *, #3603, .F. ) ; +#726 = CARTESIAN_POINT ( 'NONE', ( -1.616324735193374900, 7.655385650358173400, -9.999983233560552500 ) ) ; +#727 = ORIENTED_EDGE ( 'NONE', *, *, #1706, .T. ) ; +#728 = FACE_OUTER_BOUND ( 'NONE', #3254, .T. ) ; +#729 = EDGE_CURVE ( 'NONE', #3842, #3414, #2518, .T. ) ; +#730 = CARTESIAN_POINT ( 'NONE', ( 6.809440308869120900, 6.943775436667342800, -9.974317879924033300 ) ) ; +#731 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 7.499997531949971700, -6.199983233560551800 ) ) ; +#732 = ORIENTED_EDGE ( 'NONE', *, *, #2078, .F. ) ; +#733 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -13.13176217742977600, -9.626418191079084300 ) ) ; +#734 = CARTESIAN_POINT ( 'NONE', ( 8.232050807568876700, 8.499997531949970800, 7.500016766439452800 ) ) ; +#735 = LINE ( 'NONE', #640, #779 ) ; +#736 = VERTEX_POINT ( 'NONE', #3350 ) ; +#737 = ORIENTED_EDGE ( 'NONE', *, *, #1025, .T. ) ; +#738 = CARTESIAN_POINT ( 'NONE', ( 6.942598281564199800, 6.737958881029594900, -10.68395545262406900 ) ) ; +#739 = CARTESIAN_POINT ( 'NONE', ( -1.823340202265569400, 6.933277317805309500, -9.988635795855687500 ) ) ; +#740 = CARTESIAN_POINT ( 'NONE', ( 2.563965153173468400E-012, 2.679459900918971900, 12.50001676644026800 ) ) ; +#741 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1757, #1784, #1655, #1653 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 3.291098825134366500, 4.324612629052473300 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9129506960894542300, 0.9129506960894542300, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#742 = FACE_OUTER_BOUND ( 'NONE', #3876, .T. ) ; +#743 = AXIS2_PLACEMENT_3D ( 'NONE', #502, #486, #359 ) ; +#744 = CARTESIAN_POINT ( 'NONE', ( -1.953191355211109100, 6.718913507882124500, -10.69620099036688100 ) ) ; +#745 = VECTOR ( 'NONE', #1535, 1000.000000000000000 ) ; +#746 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 7.499997531949971700, -4.999983233560546300 ) ) ; +#747 = CARTESIAN_POINT ( 'NONE', ( -8.269055164952933200E-016, 2.827250478211312600, 14.75001676643739200 ) ) ; +#748 = CARTESIAN_POINT ( 'NONE', ( 6.558524527249999500, 7.638581339775202900, -9.999983233560552500 ) ) ; +#749 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -15.22971968983027400, -13.60559462543089800 ) ) ; +#750 = CARTESIAN_POINT ( 'NONE', ( 2.249999999999998700, 2.499997531949968500, 12.50001676643944900 ) ) ; +#751 = EDGE_CURVE ( 'NONE', #2707, #1943, #2331, .T. ) ; +#752 = CYLINDRICAL_SURFACE ( 'NONE', #647, 1.000000000000000000 ) ; +#753 = APPROVAL_ROLE ( '' ) ; +#754 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, 7.499997531949970800, -7.834640608427721800 ) ) ; +#755 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, 2.499997531949972100, -15.18694403236027300 ) ) ; +#756 = EDGE_CURVE ( 'NONE', #3842, #4178, #2363, .T. ) ; +#757 = EDGE_CURVE ( 'NONE', #1376, #3455, #2318, .T. ) ; +#758 = CARTESIAN_POINT ( 'NONE', ( 6.707658855551427400, 6.953539765999033200, -9.994365014815839400 ) ) ; +#759 = CARTESIAN_POINT ( 'NONE', ( 9.513285556760259000, 7.499997531949970800, -8.540376551125341100 ) ) ; +#760 = DIRECTION ( 'NONE', ( -6.842277657836020900E-049, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#761 = EDGE_CURVE ( 'NONE', #3991, #1010, #2370, .T. ) ; +#762 = ORIENTED_EDGE ( 'NONE', *, *, #4106, .T. ) ; +#763 = AXIS2_PLACEMENT_3D ( 'NONE', #2181, #2168, #2148 ) ; +#764 = CARTESIAN_POINT ( 'NONE', ( 0.2984214907587040600, -13.85739360083944800, -11.51165879743400000 ) ) ; +#765 = CARTESIAN_POINT ( 'NONE', ( -1.726087953381586900, 7.733998395271057400, -9.980181966002021500 ) ) ; +#766 = DIRECTION ( 'NONE', ( 1.000000000000000000, -5.782411586589356700E-016, 0.0000000000000000000 ) ) ; +#767 = ORIENTED_EDGE ( 'NONE', *, *, #463, .F. ) ; +#768 = CARTESIAN_POINT ( 'NONE', ( -2.012695310983842100, 6.927990933130050000, -9.917264537012984600 ) ) ; +#769 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -14.13176217742977400, -11.35960056912458200 ) ) ; +#770 = ORIENTED_EDGE ( 'NONE', *, *, #2958, .F. ) ; +#771 = ORIENTED_EDGE ( 'NONE', *, *, #2752, .F. ) ; +#772 = VERTEX_POINT ( 'NONE', #3240 ) ; +#773 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#774 = VERTEX_POINT ( 'NONE', #3305 ) ; +#775 = CARTESIAN_POINT ( 'NONE', ( 6.793964034381499300, 6.716681441891497100, -10.64872207150012300 ) ) ; +#776 = ORIENTED_EDGE ( 'NONE', *, *, #4094, .T. ) ; +#777 = CARTESIAN_POINT ( 'NONE', ( -2.231949091969250600, 6.795565600696721600, -10.74294030710427900 ) ) ; +#778 = DIRECTION ( 'NONE', ( -5.782411586589357600E-016, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#779 = VECTOR ( 'NONE', #1290, 1000.000000000000000 ) ; +#780 = ORIENTED_EDGE ( 'NONE', *, *, #673, .F. ) ; +#781 = ORIENTED_EDGE ( 'NONE', *, *, #1622, .T. ) ; +#782 = FACE_OUTER_BOUND ( 'NONE', #201, .T. ) ; +#783 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#784 = CARTESIAN_POINT ( 'NONE', ( -1.880636944765724300, 7.856373934111560200, -9.926315703959520700 ) ) ; +#785 = VERTEX_POINT ( 'NONE', #3236 ) ; +#786 = EDGE_CURVE ( 'NONE', #3775, #721, #2269, .T. ) ; +#787 = CARTESIAN_POINT ( 'NONE', ( 4.583358568415245100, -13.94722307796519600, -11.45891996643404000 ) ) ; +#788 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 9.099997531949975700, -8.189983233560539600 ) ) ; +#789 = CIRCLE ( 'NONE', #1129, 1.000000000000000900 ) ; +#790 = ORIENTED_EDGE ( 'NONE', *, *, #3275, .T. ) ; +#791 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669295500, 0.9848077530122082400 ) ) ; +#792 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #95, #72, #69, #65 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.570796326794896600, 3.141592653589793100 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#793 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000003600, 7.621566414235090300, -9.999983233560552500 ) ) ; +#794 = CARTESIAN_POINT ( 'NONE', ( -2.221740895151046200, 6.903055586946679900, -9.787346958062752100 ) ) ; +#795 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, 2.499997531949969900, 14.75001676643945100 ) ) ; +#796 = FACE_OUTER_BOUND ( 'NONE', #628, .T. ) ; +#797 = CARTESIAN_POINT ( 'NONE', ( 0.4500000000000018400, 2.499997531949969400, 13.40001676643945000 ) ) ; +#798 = CARTESIAN_POINT ( 'NONE', ( -2.599418767720557800, 6.921467644246901000, -10.73792846231725500 ) ) ; +#799 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1705, #825, #507 ), + ( #2460, #4127, #1814 ), + ( #3815, #1477, #3476 ), + ( #2020, #3096, #204 ), + ( #2126, #4118, #1795 ), + ( #3805, #1462, #3458 ), + ( #1134, #3131, #810 ), + ( #2768, #499, #2449 ), + ( #184, #2111, #4105 ), + ( #1780, #3785, #1452 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.006592299054644028300, 0.007113086752876713500, 0.007633874451109398700, 0.008154662149342083900, 0.008675449847574769100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7637626158259729300, 1.000000000000000000), + ( 1.000000000000000000, 0.7637638718602882700, 1.000000000000000000), + ( 1.000000000000000000, 0.7618512767979768200, 1.000000000000000000), + ( 1.000000000000000000, 0.7547505880798526200, 1.000000000000000000), + ( 1.000000000000000000, 0.7495274566205596400, 1.000000000000000000), + ( 1.000000000000000000, 0.7375442996231296200, 1.000000000000000000), + ( 1.000000000000000000, 0.7306308017557864300, 1.000000000000000000), + ( 1.000000000000000000, 0.7176983900246775000, 1.000000000000000000), + ( 1.000000000000000000, 0.7116238925679281300, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#800 = DIRECTION ( 'NONE', ( 1.368455531567204500E-048, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#801 = CIRCLE ( 'NONE', #651, 1.200000000000005700 ) ; +#802 = CARTESIAN_POINT ( 'NONE', ( -1.930064624798282000, 7.898225957801716200, -9.904416923558333300 ) ) ; +#803 = DIRECTION ( 'NONE', ( 0.07036808095234468900, 0.9823665072671571300, 0.1732177201755373000 ) ) ; +#804 = CARTESIAN_POINT ( 'NONE', ( 6.631869188944578200, 6.714409161062628000, -10.60038814472224700 ) ) ; +#805 = CARTESIAN_POINT ( 'NONE', ( -2.279851337423925100, 6.892674791127650000, -9.737951065554456800 ) ) ; +#806 = EDGE_CURVE ( 'NONE', #624, #2411, #2277, .T. ) ; +#807 = PERSON_AND_ORGANIZATION ( #1256, #2848 ) ; +#808 = CARTESIAN_POINT ( 'NONE', ( -3.059890900778526700, 7.602053215298424100, -4.861462166778896900 ) ) ; +#809 = CARTESIAN_POINT ( 'NONE', ( -2.712591445749597900, 6.965877327774593100, -10.72385982723890900 ) ) ; +#810 = CARTESIAN_POINT ( 'NONE', ( 7.791195695993612200, 7.480973796895309400, 7.947697079948644800 ) ) ; +#811 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 2.499997531949972100, -15.44080068533170500 ) ) ; +#812 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000004400, -14.13276217742978800, 6.500016766439443900 ) ) ; +#813 = ORIENTED_EDGE ( 'NONE', *, *, #4184, .F. ) ; +#814 = CARTESIAN_POINT ( 'NONE', ( 2.768528700697118400, 3.017996419360648600, -15.09560685253280500 ) ) ; +#815 = CIRCLE ( 'NONE', #2139, 5.000000000000000900 ) ; +#816 = EDGE_CURVE ( 'NONE', #2311, #488, #2221, .T. ) ; +#817 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 3.382781095964637200, -15.28514212486994200 ) ) ; +#818 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999998700, 7.621566414235089400, -10.99998323356054900 ) ) ; +#819 = ORIENTED_EDGE ( 'NONE', *, *, #1316, .F. ) ; +#820 = ORIENTED_EDGE ( 'NONE', *, *, #3845, .F. ) ; +#821 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #3752, #1112, ( #1885 ) ) ; +#822 = ORIENTED_EDGE ( 'NONE', *, *, #77, .T. ) ; +#823 = DATE_TIME_ROLE ( 'classification_date' ) ; +#824 = CARTESIAN_POINT ( 'NONE', ( -2.025584369686194400, 7.979343881492089200, -9.852460184244529600 ) ) ; +#825 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000005300, 7.570923060321071300, 7.500016766439443900 ) ) ; +#826 = ORIENTED_EDGE ( 'NONE', *, *, #1105, .F. ) ; +#827 = CYLINDRICAL_SURFACE ( 'NONE', #1367, 5.000000000000000000 ) ; +#828 = TOROIDAL_SURFACE ( 'NONE', #2926, 6.500000000000004400, 1.000000000000000000 ) ; +#829 = CARTESIAN_POINT ( 'NONE', ( 4.870375327144993000, -13.64271410323163100, -11.66932888437918900 ) ) ; +#830 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 2.499997531949970300, 2.891202939038461200E-016 ) ) ; +#831 = ORIENTED_EDGE ( 'NONE', *, *, #3205, .F. ) ; +#832 = ORIENTED_EDGE ( 'NONE', *, *, #2065, .F. ) ; +#833 = CIRCLE ( 'NONE', #1427, 0.9999999999999991100 ) ; +#834 = EDGE_CURVE ( 'NONE', #2932, #3529, #2275, .T. ) ; +#835 = ORIENTED_EDGE ( 'NONE', *, *, #3895, .T. ) ; +#836 = CARTESIAN_POINT ( 'NONE', ( -3.232050807568873600, 7.499997531949969000, 7.500016766439451000 ) ) ; +#837 = ORIENTED_EDGE ( 'NONE', *, *, #1188, .T. ) ; +#838 = ORIENTED_EDGE ( 'NONE', *, *, #2817, .F. ) ; +#839 = VERTEX_POINT ( 'NONE', #2995 ) ; +#840 = EDGE_CURVE ( 'NONE', #3536, #4182, #2170, .T. ) ; +#841 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#842 = CARTESIAN_POINT ( 'NONE', ( -2.371155726829240700, 6.869356894732442600, -9.639430425068750800 ) ) ; +#843 = CARTESIAN_POINT ( 'NONE', ( -3.585193071784312600, 7.428083097835704000, -8.810369524435527600 ) ) ; +#844 = ORIENTED_EDGE ( 'NONE', *, *, #3864, .T. ) ; +#845 = EDGE_LOOP ( 'NONE', ( #677, #720, #732, #813 ) ) ; +#846 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#847 = AXIS2_PLACEMENT_3D ( 'NONE', #3727, #3618, #3566 ) ; +#848 = CARTESIAN_POINT ( 'NONE', ( -2.923330986279386600, 7.051444136228225200, -10.66994709466420100 ) ) ; +#849 = LINE ( 'NONE', #1599, #2385 ) ; +#850 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1760, #3135, #1471, #1215, #2177, #4162, #3850, #1838 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001405496796772931700, 0.002108245195159398100, 0.002810993593545864700 ), + .UNSPECIFIED. ) ; +#851 = AXIS2_PLACEMENT_3D ( 'NONE', #701, #688, #773 ) ; +#852 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 7.499997531949971700, -3.383320003323663000 ) ) ; +#853 = CARTESIAN_POINT ( 'NONE', ( -2.071939278739592300, 8.018837261276630100, -9.822148699296986900 ) ) ; +#854 = FACE_OUTER_BOUND ( 'NONE', #3627, .T. ) ; +#855 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, 7.499997531949976100, -14.99998323356054700 ) ) ; +#856 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#857 = CARTESIAN_POINT ( 'NONE', ( -2.402351154380546000, 6.856432897963926200, -9.590765895811090400 ) ) ; +#858 = CARTESIAN_POINT ( 'NONE', ( 4.550000000000005200, -12.53176217742979200, 7.500016766439451000 ) ) ; +#859 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#860 = AXIS2_PLACEMENT_3D ( 'NONE', #3613, #25, #2291 ) ; +#861 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #207, #2690, #2654 ), + ( #2637, #2628, #2608 ), + ( #2596, #2586, #2573 ), + ( #2555, #2542, #2529 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.003155002649193979000, 0.003232971201904412700 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7099301615778214100, 1.000000000000000000), + ( 1.000000000000000000, 0.7089369053205554200, 1.000000000000000000), + ( 1.000000000000000000, 0.7079950813316821000, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#862 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#863 = CARTESIAN_POINT ( 'NONE', ( -3.021362937479848700, 7.092821051864598700, -10.62966395911671000 ) ) ; +#864 = EDGE_CURVE ( 'NONE', #3991, #2161, #2217, .T. ) ; +#865 = AXIS2_PLACEMENT_3D ( 'NONE', #2242, #2234, #2230 ) ; +#866 = ORIENTED_EDGE ( 'NONE', *, *, #4185, .T. ) ; +#867 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 0.0000000000000000000, -14.99998323356054700 ) ) ; +#868 = ORIENTED_EDGE ( 'NONE', *, *, #3969, .F. ) ; +#869 = CARTESIAN_POINT ( 'NONE', ( -2.115607587768303600, 8.054510599743098400, -9.788036085774212600 ) ) ; +#870 = ORIENTED_EDGE ( 'NONE', *, *, #1596, .F. ) ; +#871 = AXIS2_PLACEMENT_3D ( 'NONE', #297, #280, #274 ) ; +#872 = ORIENTED_EDGE ( 'NONE', *, *, #1249, .T. ) ; +#873 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, 2.499997531949968500, 14.75001676643944900 ) ) ; +#874 = TOROIDAL_SURFACE ( 'NONE', #3701, 7.249999999999999100, 2.250000000000000000 ) ; +#875 = VERTEX_POINT ( 'NONE', #2911 ) ; +#876 = ORIENTED_EDGE ( 'NONE', *, *, #546, .F. ) ; +#877 = ORIENTED_EDGE ( 'NONE', *, *, #593, .F. ) ; +#878 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#879 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#880 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, -11.63176217742977400, -1.446751736521832800E-015 ) ) ; +#881 = VECTOR ( 'NONE', #105, 1000.000000000000000 ) ; +#882 = VERTEX_POINT ( 'NONE', #2970 ) ; +#883 = ORIENTED_EDGE ( 'NONE', *, *, #546, .T. ) ; +#884 = VERTEX_POINT ( 'NONE', #2905 ) ; +#885 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999996400, 8.416077315049586000, 7.500016766439451000 ) ) ; +#886 = CARTESIAN_POINT ( 'NONE', ( -3.565461751398898200, 7.289788760521457100, -9.914721068902245800 ) ) ; +#887 = EDGE_CURVE ( 'NONE', #1484, #4141, #210, .T. ) ; +#888 = EDGE_LOOP ( 'NONE', ( #1895, #1939, #1956, #1988 ) ) ; +#889 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#890 = ORIENTED_EDGE ( 'NONE', *, *, #4087, .F. ) ; +#891 = EDGE_CURVE ( 'NONE', #1445, #2607, #4138, .T. ) ; +#892 = FACE_OUTER_BOUND ( 'NONE', #1998, .T. ) ; +#893 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#894 = CARTESIAN_POINT ( 'NONE', ( 1.249999999999995300, -14.13176217742977800, -3.277205641478953400 ) ) ; +#895 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#896 = EDGE_CURVE ( 'NONE', #3212, #3574, #2210, .T. ) ; +#897 = AXIS2_PLACEMENT_3D ( 'NONE', #569, #489, #470 ) ; +#898 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -15.22971968983027400, -13.60559462543089800 ) ) ; +#899 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#900 = VECTOR ( 'NONE', #3983, 1000.000000000000000 ) ; +#901 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999997600, 12.49999753194997600, -8.999983233560549000 ) ) ; +#902 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#903 = AXIS2_PLACEMENT_3D ( 'NONE', #1603, #1460, #1174 ) ; +#904 = AXIS2_PLACEMENT_3D ( 'NONE', #1120, #1360, #1001 ) ; +#905 = CARTESIAN_POINT ( 'NONE', ( 2.169124467740432700, 3.579883806538859800, -15.00376507616815400 ) ) ; +#906 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000003600, 7.404783783242378600, -8.805759462705081500 ) ) ; +#907 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#908 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122081300, 0.1736481776669296700 ) ) ; +#909 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 2.499997531949969900, 12.50001676643945100 ) ) ; +#910 = CARTESIAN_POINT ( 'NONE', ( 6.594219528202283500, 6.973409486272857700, -9.999983233560554300 ) ) ; +#911 = EDGE_LOOP ( 'NONE', ( #285, #890, #973, #1034 ) ) ; +#912 = AXIS2_PLACEMENT_3D ( 'NONE', #3300, #1303, #3634 ) ; +#913 = CIRCLE ( 'NONE', #2575, 2.249999999999998700 ) ; +#914 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2448, #2445, #2388, #2375, #2368, #2355 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.0004104093884435382200, 0.0008208187768870764400 ), + .UNSPECIFIED. ) ; +#915 = VERTEX_POINT ( 'NONE', #2699 ) ; +#916 = ORIENTED_EDGE ( 'NONE', *, *, #380, .F. ) ; +#917 = CARTESIAN_POINT ( 'NONE', ( -3.109345979613932000, 7.128758421777613200, -10.57608893798796100 ) ) ; +#918 = CYLINDRICAL_SURFACE ( 'NONE', #2685, 2.500000000000000400 ) ; +#919 = EDGE_LOOP ( 'NONE', ( #1443, #3558, #4049 ) ) ; +#920 = CARTESIAN_POINT ( 'NONE', ( -3.244910075478736100, 7.529949033216612800, -3.893457977618779400 ) ) ; +#921 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999997600, -14.13276217742978600, -8.999983233560552500 ) ) ; +#922 = ORIENTED_EDGE ( 'NONE', *, *, #3085, .T. ) ; +#923 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#924 = ORIENTED_EDGE ( 'NONE', *, *, #967, .F. ) ; +#925 = FACE_OUTER_BOUND ( 'NONE', #3673, .T. ) ; +#926 = ORIENTED_EDGE ( 'NONE', *, *, #1213, .F. ) ; +#927 = ORIENTED_EDGE ( 'NONE', *, *, #3178, .T. ) ; +#928 = CYLINDRICAL_SURFACE ( 'NONE', #1068, 2.250000000000000400 ) ; +#929 = CARTESIAN_POINT ( 'NONE', ( -2.421686170596999900, 6.847878330210587400, -9.548934993108375100 ) ) ; +#930 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#931 = LINE ( 'NONE', #545, #338 ) ; +#932 = ORIENTED_EDGE ( 'NONE', *, *, #1596, .T. ) ; +#933 = EDGE_LOOP ( 'NONE', ( #205, #826, #3944, #2927 ) ) ; +#934 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#935 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#936 = ORIENTED_EDGE ( 'NONE', *, *, #4123, .T. ) ; +#937 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#938 = AXIS2_PLACEMENT_3D ( 'NONE', #949, #630, #2593 ) ; +#939 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -5.711846095760983600, -9.273070689112938000 ) ) ; +#940 = CYLINDRICAL_SURFACE ( 'NONE', #2386, 1.200000000000005700 ) ; +#941 = EDGE_CURVE ( 'NONE', #656, #2205, #2165, .T. ) ; +#942 = AXIS2_PLACEMENT_3D ( 'NONE', #206, #187, #90 ) ; +#943 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#944 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#945 = CARTESIAN_POINT ( 'NONE', ( 7.071523044551221400, 8.018497230006611100, -9.822473851250904900 ) ) ; +#946 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#947 = VECTOR ( 'NONE', #952, 1000.000000000000000 ) ; +#948 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999996200, 7.570923060321069500, 7.500016766439451000 ) ) ; +#949 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000003600, -14.13276217742978600, -9.999983233560552500 ) ) ; +#950 = CARTESIAN_POINT ( 'NONE', ( 6.175210994631164000, 7.597114959037289100, -9.999983233560550700 ) ) ; +#951 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -6.631762177429777700, 7.500016766439451900 ) ) ; +#952 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#953 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 7.499997531949970800, 8.673614525627818800E-016 ) ) ; +#954 = CARTESIAN_POINT ( 'NONE', ( 4.974543174271866900, 3.736278877765586000, 13.63301902063253700 ) ) ; +#955 = CARTESIAN_POINT ( 'NONE', ( 7.402144395184745200, 6.856524375910521700, -9.591213200689191300 ) ) ; +#956 = EDGE_CURVE ( 'NONE', #2399, #1793, #2109, .T. ) ; +#957 = APPROVAL_ROLE ( '' ) ; +#958 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999996700, 7.430064017866317100, 8.333350099772783200 ) ) ; +#959 = ORIENTED_EDGE ( 'NONE', *, *, #891, .T. ) ; +#960 = CARTESIAN_POINT ( 'NONE', ( 0.1291692660363241200, -13.64206326507615000, -11.66982779462951400 ) ) ; +#961 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 2.499997531949972100, -15.18694403236027700 ) ) ; +#962 = VERTEX_POINT ( 'NONE', #2585 ) ; +#963 = EDGE_CURVE ( 'NONE', #785, #1484, #2253, .T. ) ; +#964 = EDGE_LOOP ( 'NONE', ( #2527, #51, #3852, #4181, #4046, #1501 ) ) ; +#965 = ORIENTED_EDGE ( 'NONE', *, *, #3044, .T. ) ; +#966 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.337451350268914000E-032, -1.156482317317871500E-016 ) ) ; +#967 = EDGE_CURVE ( 'NONE', #839, #3936, #2051, .T. ) ; +#968 = ORIENTED_EDGE ( 'NONE', *, *, #3415, .F. ) ; +#969 = AXIS2_PLACEMENT_3D ( 'NONE', #814, #803, #791 ) ; +#970 = ORIENTED_EDGE ( 'NONE', *, *, #3205, .T. ) ; +#971 = CARTESIAN_POINT ( 'NONE', ( 8.020522191681424200, 7.092477642589048300, -10.63017589490035400 ) ) ; +#972 = FACE_OUTER_BOUND ( 'NONE', #845, .T. ) ; +#973 = ORIENTED_EDGE ( 'NONE', *, *, #3534, .F. ) ; +#974 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#975 = CARTESIAN_POINT ( 'NONE', ( 7.366025403784441000, 8.499997531949970800, 7.000016766439449300 ) ) ; +#976 = ORIENTED_EDGE ( 'NONE', *, *, #1437, .F. ) ; +#977 = EDGE_LOOP ( 'NONE', ( #3147, #3168, #3215, #3478 ) ) ; +#978 = CARTESIAN_POINT ( 'NONE', ( 5.228481199070474300, 4.235484539469910100, -15.13478750123694600 ) ) ; +#979 = EDGE_LOOP ( 'NONE', ( #3531, #2158, #835, #3036 ) ) ; +#980 = CARTESIAN_POINT ( 'NONE', ( 0.4499999999999966200, -12.53176217742978000, -3.277205641478954800 ) ) ; +#981 = CIRCLE ( 'NONE', #1158, 2.249999999999998700 ) ; +#982 = CARTESIAN_POINT ( 'NONE', ( -1.676738185825224800, 7.430064017041312100, 8.333350104653581200 ) ) ; +#983 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#984 = LOCAL_TIME ( 17, 44, 58.00000000000000000, #1865 ) ; +#985 = VECTOR ( 'NONE', #1057, 1000.000000000000000 ) ; +#986 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999997300, 12.49999753194997600, -9.999983233560549000 ) ) ; +#987 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #2981, #2906, #2591, #2569 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.1495061715445741000, 1.015073958040055600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9385344700625568600, 0.9385344700625568600, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#988 = DATE_TIME_ROLE ( 'creation_date' ) ; +#989 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, 12.49999753194997600, -14.99998323356054700 ) ) ; +#990 = AXIS2_PLACEMENT_3D ( 'NONE', #13, #2280, #330 ) ; +#991 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, 1.734723475976807100E-016 ) ) ; +#992 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.619204683932433700, -15.15646584843778700 ) ) ; +#993 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 7.499997531949971700, 2.891202939038461700E-016 ) ) ; +#994 = EDGE_CURVE ( 'NONE', #1542, #132, #2066, .T. ) ; +#995 = FACE_OUTER_BOUND ( 'NONE', #3111, .T. ) ; +#996 = PLANE ( 'NONE', #3187 ) ; +#997 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#998 = APPROVAL_DATE_TIME ( #176, #2971 ) ; +#999 = CARTESIAN_POINT ( 'NONE', ( -1.849869831979102300, 7.433435965238992100, 8.314036311924201800 ) ) ; +#1000 = CARTESIAN_POINT ( 'NONE', ( 8.097801686606050700, 7.581068925561396600, -4.434504502890884000 ) ) ; +#1001 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1002 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669296900, -0.9848077530122082400 ) ) ; +#1003 = PLANE ( 'NONE', #19 ) ; +#1004 = CARTESIAN_POINT ( 'NONE', ( -3.555795347452993700, 7.350626525024699400, -9.063675878993933600 ) ) ; +#1005 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122082400, -0.1736481776669296100 ) ) ; +#1006 = ORIENTED_EDGE ( 'NONE', *, *, #1622, .F. ) ; +#1007 = CYLINDRICAL_SURFACE ( 'NONE', #2885, 0.9999999999999991100 ) ; +#1008 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 7.499997531949969900, 7.500016766439451900 ) ) ; +#1009 = ORIENTED_EDGE ( 'NONE', *, *, #2553, .F. ) ; +#1010 = VERTEX_POINT ( 'NONE', #2627 ) ; +#1011 = EDGE_CURVE ( 'NONE', #683, #1863, #1959, .T. ) ; +#1012 = CARTESIAN_POINT ( 'NONE', ( -0.03522297429031388800, 3.841646176649700100, 13.66977577214119900 ) ) ; +#1013 = CARTESIAN_POINT ( 'NONE', ( 8.044455473534203100, 7.499997531949967200, 10.33555632981485500 ) ) ; +#1014 = CARTESIAN_POINT ( 'NONE', ( -2.499253340664267900, 8.369912996714960600, -9.038619501125101200 ) ) ; +#1015 = CARTESIAN_POINT ( 'NONE', ( 5.517241379310345200, 4.714692804133610700, 14.00001676643945100 ) ) ; +#1016 = FACE_OUTER_BOUND ( 'NONE', #919, .T. ) ; +#1017 = ORIENTED_EDGE ( 'NONE', *, *, #607, .T. ) ; +#1018 = CARTESIAN_POINT ( 'NONE', ( 8.498506681328535700, 7.391593752587547300, -8.870153241978941900 ) ) ; +#1019 = AXIS2_PLACEMENT_3D ( 'NONE', #22, #2259, #1591 ) ; +#1020 = ORIENTED_EDGE ( 'NONE', *, *, #3332, .T. ) ; +#1021 = FACE_OUTER_BOUND ( 'NONE', #3425, .T. ) ; +#1022 = VECTOR ( 'NONE', #279, 1000.000000000000000 ) ; +#1023 = ORIENTED_EDGE ( 'NONE', *, *, #1712, .F. ) ; +#1024 = ORIENTED_EDGE ( 'NONE', *, *, #816, .T. ) ; +#1025 = EDGE_CURVE ( 'NONE', #2471, #1943, #2115, .T. ) ; +#1026 = CYLINDRICAL_SURFACE ( 'NONE', #704, 2.249999999999998700 ) ; +#1027 = EDGE_LOOP ( 'NONE', ( #819, #838, #870, #916 ) ) ; +#1028 = AXIS2_PLACEMENT_3D ( 'NONE', #3218, #3882, #1547 ) ; +#1029 = CIRCLE ( 'NONE', #990, 2.000000000000000000 ) ; +#1030 = CARTESIAN_POINT ( 'NONE', ( -3.069292443434768400, 7.597272074224296300, -4.718475623496441800 ) ) ; +#1031 = ORIENTED_EDGE ( 'NONE', *, *, #2501, .T. ) ; +#1032 = CARTESIAN_POINT ( 'NONE', ( 5.517241379310345200, 4.714692804133610700, 14.00001676643945100 ) ) ; +#1033 = CARTESIAN_POINT ( 'NONE', ( 8.244910075478745900, 7.529949033216613700, -6.106508489502312300 ) ) ; +#1034 = ORIENTED_EDGE ( 'NONE', *, *, #408, .F. ) ; +#1035 = CARTESIAN_POINT ( 'NONE', ( -3.565461751398898200, 7.289788760521457100, -9.914721068902245800 ) ) ; +#1036 = LINE ( 'NONE', #135, #2010 ) ; +#1037 = CARTESIAN_POINT ( 'NONE', ( -3.511255785605172700, 7.273554121573190500, -10.04119434560060500 ) ) ; +#1038 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.243794116878613800E-016, 1.000000000000000000 ) ) ; +#1039 = CARTESIAN_POINT ( 'NONE', ( 2.169124467740433100, 3.244746686838859700, -12.77886437928319200 ) ) ; +#1040 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000400, 7.499997531949976100, -14.99998323356054700 ) ) ; +#1041 = FACE_OUTER_BOUND ( 'NONE', #3890, .T. ) ; +#1042 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3855, #3443, #3059 ), + ( #1004, #3012, #403 ), + ( #2691, #2164, #2057 ), + ( #2025, #1997, #3338 ), + ( #1694, #1841, #1773 ), + ( #1260, #1348, #1166 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( 0.007508451664567411700, 0.007945760464287264500, 0.008383069264007118200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7099301615799238400, 1.000000000000000000), + ( 1.000000000000000000, 0.6924419486509917300, 1.000000000000000000), + ( 1.000000000000000000, 0.6731661605172696300, 1.000000000000000000), + ( 1.000000000000000000, 0.6376895087562308700, 1.000000000000000000), + ( 1.000000000000000000, 0.6213366374804999400, 1.000000000000000000), + ( 1.000000000000000000, 0.6102702726631109600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1043 = EDGE_CURVE ( 'NONE', #3158, #1445, #1747, .T. ) ; +#1044 = CARTESIAN_POINT ( 'NONE', ( -3.106740132245808400, 7.580340569967745500, -4.437787094583168100 ) ) ; +#1045 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999996200, 12.49999753194997300, 7.500016766439451900 ) ) ; +#1046 = EDGE_CURVE ( 'NONE', #2163, #426, #1945, .T. ) ; +#1047 = CARTESIAN_POINT ( 'NONE', ( 5.012778414273875600, 2.857238143957334200, -15.09560685253280500 ) ) ; +#1048 = CIRCLE ( 'NONE', #743, 5.000000000000000900 ) ; +#1049 = CARTESIAN_POINT ( 'NONE', ( -3.445048668946482500, 7.252746595471713900, -10.16208997094700800 ) ) ; +#1050 = CARTESIAN_POINT ( 'NONE', ( 8.565461751399956500, 7.289788760521789300, -9.914721068897783600 ) ) ; +#1051 = CARTESIAN_POINT ( 'NONE', ( 0.6171434654174841100, -14.05869366063194700, -11.39647077946810700 ) ) ; +#1052 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1294, #978, #817, #811 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.188790204786390500, 4.712388980384689700 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9772838841927120600, 0.9772838841927120600, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#1053 = CARTESIAN_POINT ( 'NONE', ( -2.185802149728067100, 7.445233006266777300, 8.238994911612275400 ) ) ; +#1054 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 7.499997531949969000, 14.00001676643945100 ) ) ; +#1055 = AXIS2_PLACEMENT_3D ( 'NONE', #621, #2913, #944 ) ; +#1056 = APPROVAL_ROLE ( '' ) ; +#1057 = DIRECTION ( 'NONE', ( -1.519290839321568100E-064, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#1058 = CARTESIAN_POINT ( 'NONE', ( -1.594219528202283100, 6.973409486272792000, -9.999983233560549000 ) ) ; +#1059 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -13.13176217742977600, -12.24597178207973200 ) ) ; +#1060 = ORIENTED_EDGE ( 'NONE', *, *, #341, .F. ) ; +#1061 = CARTESIAN_POINT ( 'NONE', ( -3.292656765889057100, 7.200154591420165700, -10.38370718569463400 ) ) ; +#1062 = CARTESIAN_POINT ( 'NONE', ( 8.606262856756689700, 7.302008655591579100, -9.741498941910258200 ) ) ; +#1063 = VERTEX_POINT ( 'NONE', #2282 ) ; +#1064 = CARTESIAN_POINT ( 'NONE', ( 8.500000000000001800, 8.499997531949970800, 8.095373366968882500E-016 ) ) ; +#1065 = CARTESIAN_POINT ( 'NONE', ( 8.613148913470619000, 7.307928379262814500, -9.563734392527738500 ) ) ; +#1066 = EDGE_LOOP ( 'NONE', ( #3063, #4131, #388, #2597 ) ) ; +#1067 = ORIENTED_EDGE ( 'NONE', *, *, #1849, .T. ) ; +#1068 = AXIS2_PLACEMENT_3D ( 'NONE', #79, #29, #97 ) ; +#1069 = CIRCLE ( 'NONE', #3871, 1.000000000000000700 ) ; +#1070 = ORIENTED_EDGE ( 'NONE', *, *, #2236, .F. ) ; +#1071 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#1072 = ORIENTED_EDGE ( 'NONE', *, *, #3496, .F. ) ; +#1073 = VECTOR ( 'NONE', #49, 1000.000000000000000 ) ; +#1074 = EDGE_CURVE ( 'NONE', #1625, #1185, #1897, .T. ) ; +#1075 = CARTESIAN_POINT ( 'NONE', ( 5.004261287087902400, 2.738335647649361900, -15.12600714388319800 ) ) ; +#1076 = ORIENTED_EDGE ( 'NONE', *, *, #181, .F. ) ; +#1077 = AXIS2_PLACEMENT_3D ( 'NONE', #1606, #1666, #1555 ) ; +#1078 = PLANE ( 'NONE', #1877 ) ; +#1079 = ORIENTED_EDGE ( 'NONE', *, *, #4002, .F. ) ; +#1080 = CYLINDRICAL_SURFACE ( 'NONE', #74, 1.000000000000000900 ) ; +#1081 = VERTEX_POINT ( 'NONE', #2401 ) ; +#1082 = ORIENTED_EDGE ( 'NONE', *, *, #2146, .F. ) ; +#1083 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871200E-016 ) ) ; +#1084 = CARTESIAN_POINT ( 'NONE', ( -1.601018134376640100, 7.570923060536963500, 7.500016770196433300 ) ) ; +#1085 = CARTESIAN_POINT ( 'NONE', ( 8.584142139717101800, 7.335199822972184900, -9.211029591149298300 ) ) ; +#1086 = TOROIDAL_SURFACE ( 'NONE', #1019, 2.000000000000000000, 1.000000000000000000 ) ; +#1087 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #1098 ) ; +#1088 = CARTESIAN_POINT ( 'NONE', ( -1.842901075002405500, 8.434280099281430400, 7.443403653914026000 ) ) ; +#1089 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -12.96664603309569800, -12.54328693733201100 ) ) ; +#1090 = APPROVAL_DATE_TIME ( #258, #600 ) ; +#1091 = TOROIDAL_SURFACE ( 'NONE', #2017, 27.25000000000000000, 2.250000000000000000 ) ; +#1092 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000003600, 7.049594539137487500, -8.999983233560552500 ) ) ; +#1093 = DIRECTION ( 'NONE', ( 0.8892770508389338200, 0.0000000000000000000, 0.4573689176706353700 ) ) ; +#1094 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1095 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.243794116878613600E-016 ) ) ; +#1096 = EDGE_CURVE ( 'NONE', #2251, #683, #1892, .T. ) ; +#1097 = LINE ( 'NONE', #1205, #947 ) ; +#1098 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#1099 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1100 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999997300, 12.49999753194997600, -8.999983233560549000 ) ) ; +#1101 = EDGE_CURVE ( 'NONE', #1854, #1890, #264, .T. ) ; +#1102 = DIRECTION ( 'NONE', ( -0.4531373511463233100, 0.1357142370238668400, 0.8810494803727673100 ) ) ; +#1103 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1104 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000002700, 2.499997531949969400, 14.00001676643945100 ) ) ; +#1105 = EDGE_CURVE ( 'NONE', #4097, #377, #1862, .T. ) ; +#1106 = AXIS2_PLACEMENT_3D ( 'NONE', #1861, #3322, #2039 ) ; +#1107 = CARTESIAN_POINT ( 'NONE', ( 0.4499999999999966200, -12.53176217742978000, -3.277205641478954800 ) ) ; +#1108 = CARTESIAN_POINT ( 'NONE', ( -1.588369093018017900, 8.416077314064965600, 7.500016766439451000 ) ) ; +#1109 = EDGE_LOOP ( 'NONE', ( #517, #658, #737, #771, #780 ) ) ; +#1110 = CIRCLE ( 'NONE', #3804, 10.02277622698624000 ) ; +#1111 = AXIS2_PLACEMENT_3D ( 'NONE', #746, #714, #709 ) ; +#1112 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#1113 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1914, #1966, #2022, #1878 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 3.141592653589793100, 4.712388980384688800 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243652700, 0.8047378541243652700, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#1114 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 8.499997531949969000, 14.00001676643945100 ) ) ; +#1115 = ORIENTED_EDGE ( 'NONE', *, *, #3344, .T. ) ; +#1116 = VERTEX_POINT ( 'NONE', #2222 ) ; +#1117 = CARTESIAN_POINT ( 'NONE', ( -3.278554101678677200, 8.247747006235757200, -9.914721068902245800 ) ) ; +#1118 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 7.499997531949969900, 7.500016766439451900 ) ) ; +#1119 = CARTESIAN_POINT ( 'NONE', ( 4.549999999999998900, 1.074592357511530900E-015, 13.40001676643945000 ) ) ; +#1120 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -6.631762177429775000, 7.500016766439451900 ) ) ; +#1121 = CYLINDRICAL_SURFACE ( 'NONE', #3375, 5.000000000000000000 ) ; +#1122 = ORIENTED_EDGE ( 'NONE', *, *, #1646, .T. ) ; +#1123 = CARTESIAN_POINT ( 'NONE', ( 0.4500000000000002300, -12.53176217742977600, -3.812735851400207200 ) ) ; +#1124 = ORIENTED_EDGE ( 'NONE', *, *, #1520, .F. ) ; +#1125 = CARTESIAN_POINT ( 'NONE', ( -2.350123206979988700, 7.453776577708180400, 8.182210535293391400 ) ) ; +#1126 = CARTESIAN_POINT ( 'NONE', ( 8.498506681328535700, 7.391593752587547300, -8.870153241978941900 ) ) ; +#1127 = VECTOR ( 'NONE', #163, 999.9999999999998900 ) ; +#1128 = ORIENTED_EDGE ( 'NONE', *, *, #1546, .F. ) ; +#1129 = AXIS2_PLACEMENT_3D ( 'NONE', #1272, #3602, #1604 ) ; +#1130 = ORIENTED_EDGE ( 'NONE', *, *, #3781, .F. ) ; +#1131 = TOROIDAL_SURFACE ( 'NONE', #235, 27.25000000000000000, 2.250000000000000000 ) ; +#1132 = CARTESIAN_POINT ( 'NONE', ( -3.097801686606044500, 7.581068925561393900, -5.565461964230206800 ) ) ; +#1133 = CARTESIAN_POINT ( 'NONE', ( 6.383428422772023900, 6.467939620965013100, 12.74404555342001500 ) ) ; +#1134 = CARTESIAN_POINT ( 'NONE', ( 7.145597848372284800, 8.477169053269419100, 7.268624955037636500 ) ) ; +#1135 = ORIENTED_EDGE ( 'NONE', *, *, #2071, .F. ) ; +#1136 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1137 = LINE ( 'NONE', #249, #1127 ) ; +#1138 = ORIENTED_EDGE ( 'NONE', *, *, #3732, .T. ) ; +#1139 = EDGE_LOOP ( 'NONE', ( #1676, #1579, #762, #234 ) ) ; +#1140 = AXIS2_PLACEMENT_3D ( 'NONE', #2191, #2262, #2406 ) ; +#1141 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1142 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000002700, 8.385741033500860200, -8.999983233560552500 ) ) ; +#1143 = CARTESIAN_POINT ( 'NONE', ( 0.4259567789830706600, -12.54581189357006800, -4.345631745178456700 ) ) ; +#1144 = CARTESIAN_POINT ( 'NONE', ( -1.674934915851175300, 8.420123653745506000, 7.488428493359419800 ) ) ; +#1145 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999600, 7.499997531949969000, 14.00001676643945100 ) ) ; +#1146 = CYLINDRICAL_SURFACE ( 'NONE', #1630, 2.500000000000000400 ) ; +#1147 = AXIS2_PLACEMENT_3D ( 'NONE', #387, #369, #335 ) ; +#1148 = VECTOR ( 'NONE', #3196, 1000.000000000000000 ) ; +#1149 = CARTESIAN_POINT ( 'NONE', ( -3.246497042328912100, 7.529466997969614700, -6.111329437524229700 ) ) ; +#1150 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1151 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999997800, 7.621566414235088500, -9.999983233560549000 ) ) ; +#1152 = CARTESIAN_POINT ( 'NONE', ( 4.695153469730211500, -13.85428923793863700, -11.51724582242077100 ) ) ; +#1153 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -14.13176217742977600, -2.203671148763222300E-015 ) ) ; +#1154 = CARTESIAN_POINT ( 'NONE', ( -1.700288212313824800, 7.570153822839681200, 7.484765149055314200 ) ) ; +#1155 = CARTESIAN_POINT ( 'NONE', ( -3.206356329649376200, 7.168383067050757300, -10.48515040653358600 ) ) ; +#1156 = VECTOR ( 'NONE', #1195, 1000.000000000000000 ) ; +#1157 = CARTESIAN_POINT ( 'NONE', ( 0.3450639322433325900, -12.60033550821406900, -5.407396333278437200 ) ) ; +#1158 = AXIS2_PLACEMENT_3D ( 'NONE', #3, #1919, #3924 ) ; +#1159 = MECHANICAL_CONTEXT ( 'NONE', #1189, 'mechanical' ) ; +#1160 = CARTESIAN_POINT ( 'NONE', ( -4.024271083989569700, 7.428083097834913500, -9.249447536641209700 ) ) ; +#1161 = EDGE_CURVE ( 'NONE', #2471, #3991, #1857, .T. ) ; +#1162 = AXIS2_PLACEMENT_3D ( 'NONE', #3293, #3287, #3280 ) ; +#1163 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.559374635020935700E-016, -1.000000000000000000 ) ) ; +#1164 = ORIENTED_EDGE ( 'NONE', *, *, #1249, .F. ) ; +#1165 = CARTESIAN_POINT ( 'NONE', ( -1.885960508310979200, 7.566207133677253600, 7.428698943524188400 ) ) ; +#1166 = CARTESIAN_POINT ( 'NONE', ( -2.389277050838805000, 8.247747006235455200, -9.457352151231431100 ) ) ; +#1167 = AXIS2_PLACEMENT_3D ( 'NONE', #4207, #597, #1874 ) ; +#1168 = CARTESIAN_POINT ( 'NONE', ( 0.2888959742013780800, -12.64078546381962900, -5.936317379789006300 ) ) ; +#1169 = DIRECTION ( 'NONE', ( -4.956352788505163400E-017, -2.840948884026569000E-049, -1.000000000000000000 ) ) ; +#1170 = ORIENTED_EDGE ( 'NONE', *, *, #4050, .T. ) ; +#1171 = VERTEX_POINT ( 'NONE', #2014 ) ; +#1172 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #356, #347, #1920 ), + ( #3926, #1592, #260 ), + ( #231, #224, #211 ), + ( #177, #167, #121 ), + ( #113, #107, #88 ), + ( #76, #73, #59 ), + ( #46, #26, #14 ), + ( #4, #1643, #2216 ), + ( #4224, #4024, #4135 ), + ( #4041, #4082, #3266 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 6.432691478724160000, 6.692620200409562500, 6.952548922094965900, 7.212477643780369300, 7.472406365465772600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7149077045844127700, 1.000000000000000000), + ( 1.000000000000000000, 0.7237754572981117700, 1.000000000000000000), + ( 1.000000000000000000, 0.7402901044748735300, 1.000000000000000000), + ( 1.000000000000000000, 0.7818639211416310600, 1.000000000000000000), + ( 1.000000000000000000, 0.8068355824338315800, 1.000000000000000000), + ( 1.000000000000000000, 0.8574986255077423600, 1.000000000000000000), + ( 1.000000000000000000, 0.8831442196869046000, 1.000000000000000000), + ( 1.000000000000000000, 0.9289904949431289100, 1.000000000000000000), + ( 1.000000000000000000, 0.9492238029783596200, 1.000000000000000000), + ( 1.000000000000000000, 0.9647100528786756200, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1173 = VERTEX_POINT ( 'NONE', #2008 ) ; +#1174 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1175 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, -4.843605207426335800, -14.19710945417398000 ) ) ; +#1176 = ORIENTED_EDGE ( 'NONE', *, *, #3693, .F. ) ; +#1177 = DIRECTION ( 'NONE', ( 0.1438533606401662900, -0.9895990150725344500, 0.0000000000000000000 ) ) ; +#1178 = EDGE_LOOP ( 'NONE', ( #1017, #513, #370, #2763, #2176, #3512, #1629, #3783, #1070, #3229, #1492 ) ) ; +#1179 = EDGE_LOOP ( 'NONE', ( #1732, #1755, #1783, #1811 ) ) ; +#1180 = CYLINDRICAL_SURFACE ( 'NONE', #1210, 5.000000000000000000 ) ; +#1181 = EDGE_CURVE ( 'NONE', #839, #3414, #1797, .T. ) ; +#1182 = FACE_OUTER_BOUND ( 'NONE', #3938, .T. ) ; +#1183 = ORIENTED_EDGE ( 'NONE', *, *, #3500, .T. ) ; +#1184 = DIRECTION ( 'NONE', ( 4.956352788505163400E-017, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#1185 = VERTEX_POINT ( 'NONE', #2035 ) ; +#1186 = CIRCLE ( 'NONE', #3706, 1.000000000000000900 ) ; +#1187 = ORIENTED_EDGE ( 'NONE', *, *, #1712, .T. ) ; +#1188 = EDGE_CURVE ( 'NONE', #1938, #2609, #1851, .T. ) ; +#1189 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#1190 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.243794116878613800E-016, -1.000000000000000000 ) ) ; +#1191 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1192 = CIRCLE ( 'NONE', #1293, 3.189999999999994200 ) ; +#1193 = ORIENTED_EDGE ( 'NONE', *, *, #2078, .T. ) ; +#1194 = EDGE_CURVE ( 'NONE', #1487, #3936, #1113, .T. ) ; +#1195 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1196 = APPROVAL_PERSON_ORGANIZATION ( #348, #600, #1056 ) ; +#1197 = AXIS2_PLACEMENT_3D ( 'NONE', #1978, #1975, #1965 ) ; +#1198 = VECTOR ( 'NONE', #1413, 1000.000000000000000 ) ; +#1199 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -13.13176217742977800, -9.626418191079084300 ) ) ; +#1200 = CARTESIAN_POINT ( 'NONE', ( 1.249999999999998000, -13.13176217742977800, -1.609652315192951200E-015 ) ) ; +#1201 = AXIS2_PLACEMENT_3D ( 'NONE', #1908, #1891, #1876 ) ; +#1202 = CARTESIAN_POINT ( 'NONE', ( -5.049999999999986500, 9.099997531949975700, -4.999983233560546300 ) ) ; +#1203 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 8.019335917570373600E-017 ) ) ; +#1204 = FACE_OUTER_BOUND ( 'NONE', #2304, .T. ) ; +#1205 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 7.499997531949971700, -8.189983233560539600 ) ) ; +#1206 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#1207 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1208 = DIRECTION ( 'NONE', ( -2.736911063134408900E-048, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#1209 = DIRECTION ( 'NONE', ( 1.000000000000000000, 5.731934358295345600E-033, -4.956352788505163400E-017 ) ) ; +#1210 = AXIS2_PLACEMENT_3D ( 'NONE', #334, #321, #368 ) ; +#1211 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995600, 8.416077315049584200, 7.500016766439451000 ) ) ; +#1212 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1213 = EDGE_CURVE ( 'NONE', #774, #2268, #1746, .T. ) ; +#1214 = AXIS2_PLACEMENT_3D ( 'NONE', #2180, #2145, #2131 ) ; +#1215 = CARTESIAN_POINT ( 'NONE', ( 1.051320788658503400, 3.660910251430171700, 15.00001676643944700 ) ) ; +#1216 = EDGE_LOOP ( 'NONE', ( #2265, #2405, #2426, #2461 ) ) ; +#1217 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.559374635020935700E-016 ) ) ; +#1218 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1219 = ORIENTED_EDGE ( 'NONE', *, *, #3394, .T. ) ; +#1220 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 9.099997531949975700, -3.799983233560534600 ) ) ; +#1221 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000022200, 7.621566414235091200, -9.999983233560549000 ) ) ; +#1222 = ORIENTED_EDGE ( 'NONE', *, *, #3630, .F. ) ; +#1223 = AXIS2_PLACEMENT_3D ( 'NONE', #2245, #2233, #2220 ) ; +#1224 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999996200, 12.49999753194997300, 7.500016766439451900 ) ) ; +#1225 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -8.019335917570373600E-017 ) ) ; +#1226 = CARTESIAN_POINT ( 'NONE', ( -1.175210994631167100, 7.597114959037289100, -9.999983233560549000 ) ) ; +#1227 = FACE_OUTER_BOUND ( 'NONE', #933, .T. ) ; +#1228 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #754, #759, #514, #522 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.712388980384689700, 5.003386186812356600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9929558256582764500, 0.9929558256582764500, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#1229 = ORIENTED_EDGE ( 'NONE', *, *, #2490, .T. ) ; +#1230 = VERTEX_POINT ( 'NONE', #1821 ) ; +#1231 = FACE_OUTER_BOUND ( 'NONE', #477, .T. ) ; +#1232 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1489498309777778400, 0.9888447541710940800 ) ) ; +#1233 = VERTEX_POINT ( 'NONE', #3942 ) ; +#1234 = EDGE_LOOP ( 'NONE', ( #2603, #924, #1529, #3626 ) ) ; +#1235 = LINE ( 'NONE', #62, #1073 ) ; +#1236 = CARTESIAN_POINT ( 'NONE', ( 4.550000000000003400, -12.53176217742978000, -1.558693207040908700E-015 ) ) ; +#1237 = CARTESIAN_POINT ( 'NONE', ( 6.594219528202307500, 6.973409486272855100, -9.999983233560550700 ) ) ; +#1238 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3676, #1342, #3006, #1014 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 4.134577695279536600E-005 ), + .UNSPECIFIED. ) ; +#1239 = EDGE_CURVE ( 'NONE', #1896, #2471, #1696, .T. ) ; +#1240 = VECTOR ( 'NONE', #460, 1000.000000000000000 ) ; +#1241 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, 1.002418334253397700E-015, 12.50001676643945100 ) ) ; +#1242 = DIRECTION ( 'NONE', ( -0.9895990150725345600, -0.1438533606401662900, 2.575020964874779800E-015 ) ) ; +#1243 = ORIENTED_EDGE ( 'NONE', *, *, #539, .F. ) ; +#1244 = AXIS2_PLACEMENT_3D ( 'NONE', #2451, #2441, #2424 ) ; +#1245 = LINE ( 'NONE', #4111, #2898 ) ; +#1246 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1247 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1248 = LINE ( 'NONE', #2661, #3016 ) ; +#1249 = EDGE_CURVE ( 'NONE', #47, #3775, #1901, .T. ) ; +#1250 = AXIS2_PLACEMENT_3D ( 'NONE', #2338, #2323, #2303 ) ; +#1251 = CARTESIAN_POINT ( 'NONE', ( 6.631869188944601300, 6.714409161062627100, -10.60038814472225100 ) ) ; +#1252 = CARTESIAN_POINT ( 'NONE', ( 3.049318610115480000E-017, -12.94869481606669500, -8.572633673544009600 ) ) ; +#1253 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000000900, 7.621566414235089400, -10.99998323356055100 ) ) ; +#1254 = AXIS2_PLACEMENT_3D ( 'NONE', #1916, #2155, #1728 ) ; +#1255 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, -5.711846095760983600, -9.273070689112938000 ) ) ; +#1256 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#1257 = EDGE_CURVE ( 'NONE', #4145, #1686, #1691, .T. ) ; +#1258 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1259 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1260 = CARTESIAN_POINT ( 'NONE', ( -3.565461751398729500, 7.289788760521423300, -9.914721068902959900 ) ) ; +#1261 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1262 = CARTESIAN_POINT ( 'NONE', ( 0.1175027129848762900, -12.79739131097610800, -7.520761378531918100 ) ) ; +#1263 = EDGE_CURVE ( 'NONE', #721, #1440, #1639, .T. ) ; +#1264 = ORIENTED_EDGE ( 'NONE', *, *, #1350, .T. ) ; +#1265 = CARTESIAN_POINT ( 'NONE', ( -3.109345979613404000, 7.128758421777398300, -10.57608893798828100 ) ) ; +#1266 = CARTESIAN_POINT ( 'NONE', ( 4.516650892305415600, 4.947047305888554000, 15.00001676643945100 ) ) ; +#1267 = ORIENTED_EDGE ( 'NONE', *, *, #3868, .F. ) ; +#1268 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 8.499997531949969000, 15.00001676643945100 ) ) ; +#1269 = ORIENTED_EDGE ( 'NONE', *, *, #3344, .F. ) ; +#1270 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1271 = PLANE ( 'NONE', #1986 ) ; +#1272 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999500, 8.499997531949969000, 14.00001676643945100 ) ) ; +#1273 = ORIENTED_EDGE ( 'NONE', *, *, #2204, .F. ) ; +#1274 = CARTESIAN_POINT ( 'NONE', ( 6.393045456500832600, 7.606018925206528000, -9.999983233560549000 ) ) ; +#1275 = ORIENTED_EDGE ( 'NONE', *, *, #2809, .T. ) ; +#1276 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.653907044767092300E-016, -1.000000000000000000 ) ) ; +#1277 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122082400, -0.1736481776669296900 ) ) ; +#1278 = ORIENTED_EDGE ( 'NONE', *, *, #3659, .F. ) ; +#1279 = LINE ( 'NONE', #446, #1240 ) ; +#1280 = LINE ( 'NONE', #306, #438 ) ; +#1281 = VERTEX_POINT ( 'NONE', #1979 ) ; +#1282 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000002200, -14.13176217742977600, -2.203671148763222300E-015 ) ) ; +#1283 = CARTESIAN_POINT ( 'NONE', ( 5.535124198011519800, 3.113762293551787700, 15.00001676643987600 ) ) ; +#1284 = FACE_OUTER_BOUND ( 'NONE', #557, .T. ) ; +#1285 = ORIENTED_EDGE ( 'NONE', *, *, #539, .T. ) ; +#1286 = ORIENTED_EDGE ( 'NONE', *, *, #1263, .F. ) ; +#1287 = CARTESIAN_POINT ( 'NONE', ( 5.012778414273875600, 2.857238143957334200, -15.09560685253280500 ) ) ; +#1288 = CIRCLE ( 'NONE', #1727, 0.9999999999999996700 ) ; +#1289 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #1189 ) ; +#1290 = DIRECTION ( 'NONE', ( -4.956352788505162800E-017, 1.982541115402065100E-016, -1.000000000000000000 ) ) ; +#1291 = VERTEX_POINT ( 'NONE', #1647 ) ; +#1292 = CARTESIAN_POINT ( 'NONE', ( 6.456903629151820900, 6.987738751253808700, -9.999983233560549000 ) ) ; +#1293 = AXIS2_PLACEMENT_3D ( 'NONE', #195, #178, #174 ) ; +#1294 = CARTESIAN_POINT ( 'NONE', ( 5.669872981077801000, 4.999997531949977900, -14.99998323356054700 ) ) ; +#1295 = CIRCLE ( 'NONE', #2083, 3.189999999999994200 ) ; +#1296 = CARTESIAN_POINT ( 'NONE', ( -1.284087598535183000, 7.597114959037289100, -9.999983233560549000 ) ) ; +#1297 = EDGE_CURVE ( 'NONE', #47, #4038, #1633, .T. ) ; +#1298 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1299 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 9.099997531949975700, -6.199983233560558000 ) ) ; +#1300 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #414, #402, #310, #302 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0004754075193504294300 ), + .UNSPECIFIED. ) ; +#1301 = FACE_OUTER_BOUND ( 'NONE', #2680, .T. ) ; +#1302 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1303 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#1304 = CARTESIAN_POINT ( 'NONE', ( 6.483566707154681200, 6.712330237544792400, -10.55616683685912500 ) ) ; +#1305 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9783192441275155900, 0.2071025267102421500 ) ) ; +#1306 = CARTESIAN_POINT ( 'NONE', ( -1.973559780416793700, 7.562847737383806100, 7.386803383849237300 ) ) ; +#1307 = EDGE_CURVE ( 'NONE', #2557, #1576, #1803, .T. ) ; +#1308 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#1309 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1310 = CARTESIAN_POINT ( 'NONE', ( 8.059890900778535500, 7.602053215298426800, -5.138504300342195700 ) ) ; +#1311 = ORIENTED_EDGE ( 'NONE', *, *, #1663, .F. ) ; +#1312 = FACE_OUTER_BOUND ( 'NONE', #3200, .T. ) ; +#1313 = DIRECTION ( 'NONE', ( 0.03779981419750019100, 0.2069545170887608100, 0.9776200703254780400 ) ) ; +#1314 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.715916581326906600, -15.40272833127762900 ) ) ; +#1315 = EDGE_LOOP ( 'NONE', ( #2882, #926, #3114, #431 ) ) ; +#1316 = EDGE_CURVE ( 'NONE', #1173, #1996, #1597, .T. ) ; +#1317 = VERTEX_POINT ( 'NONE', #1516 ) ; +#1318 = CARTESIAN_POINT ( 'NONE', ( 8.548063190203398800, 7.356155800603000100, -9.037556464665097900 ) ) ; +#1319 = EDGE_LOOP ( 'NONE', ( #725, #200, #2415, #1848 ) ) ; +#1320 = CARTESIAN_POINT ( 'NONE', ( 0.4135269176573362900, -13.95588214817622900, -11.45304766219907400 ) ) ; +#1321 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 7.499997531949971700, -4.999983233560546300 ) ) ; +#1322 = EDGE_CURVE ( 'NONE', #635, #4145, #1587, .T. ) ; +#1323 = CYLINDRICAL_SURFACE ( 'NONE', #3486, 3.189999999999994200 ) ; +#1324 = ORIENTED_EDGE ( 'NONE', *, *, #2071, .T. ) ; +#1325 = ORIENTED_EDGE ( 'NONE', *, *, #212, .F. ) ; +#1326 = ORIENTED_EDGE ( 'NONE', *, *, #1774, .F. ) ; +#1327 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 9.099997531949975700, -4.999983233560546300 ) ) ; +#1328 = CARTESIAN_POINT ( 'NONE', ( 6.284879470633237400, 7.597114980085651200, -9.999983233560549000 ) ) ; +#1329 = ORIENTED_EDGE ( 'NONE', *, *, #3477, .T. ) ; +#1330 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #1435 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #1357, #1341, #1308 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#1331 = VECTOR ( 'NONE', #991, 1000.000000000000000 ) ; +#1332 = AXIS2_PLACEMENT_3D ( 'NONE', #3485, #3349, #3360 ) ; +#1333 = CARTESIAN_POINT ( 'NONE', ( 8.498506681328569500, 8.369912996715054700, -9.077255768689184400 ) ) ; +#1334 = VERTEX_POINT ( 'NONE', #1407 ) ; +#1335 = CARTESIAN_POINT ( 'NONE', ( 6.317456324330989600, 7.009066438898933900, -9.999983233560547200 ) ) ; +#1336 = CYLINDRICAL_SURFACE ( 'NONE', #1644, 2.249999999999998700 ) ; +#1337 = ORIENTED_EDGE ( 'NONE', *, *, #126, .T. ) ; +#1338 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, 2.672504536910173600, -15.15652639302458100 ) ) ; +#1339 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.499997531949969000, 14.00001676643945100 ) ) ; +#1340 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999997800, 7.621566414235088500, -9.999983233560549000 ) ) ; +#1341 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#1342 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999997300, 8.380599358492512300, -9.012967646734324500 ) ) ; +#1343 = CARTESIAN_POINT ( 'NONE', ( 6.331724785572308900, 6.722218981975967900, -10.51328948477007700 ) ) ; +#1344 = EDGE_CURVE ( 'NONE', #1940, #1449, #1593, .T. ) ; +#1345 = FACE_OUTER_BOUND ( 'NONE', #977, .T. ) ; +#1346 = DIRECTION ( 'NONE', ( -0.8892770508399786600, 0.0000000000000000000, 0.4573689176686038800 ) ) ; +#1347 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000700, 9.999997531949969000, 12.50001676643945100 ) ) ; +#1348 = CARTESIAN_POINT ( 'NONE', ( -2.469852177308965700, 6.961654659352798400, -9.300687349427148500 ) ) ; +#1349 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999997300, 8.385741033500860200, -8.999983233560549000 ) ) ; +#1350 = EDGE_CURVE ( 'NONE', #1793, #4038, #1583, .T. ) ; +#1351 = AXIS2_PLACEMENT_3D ( 'NONE', #2625, #2604, #2595 ) ; +#1352 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999997300, 12.49999753194997600, -9.999983233560549000 ) ) ; +#1353 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1354 = CARTESIAN_POINT ( 'NONE', ( -1.392302010502314500, 7.605910863363005700, -9.999983233560549000 ) ) ; +#1355 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #917, #929, #869 ), + ( #863, #857, #853 ), + ( #848, #842, #824 ), + ( #809, #805, #802 ), + ( #798, #794, #784 ), + ( #777, #768, #765 ), + ( #744, #739, #726 ), + ( #718, #708, #706 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 0.009267541262658333300, 0.009614817588666287100, 0.009962093914674240900, 0.01065664656669015000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.6193624979933001200, 1.000000000000000000), + ( 1.000000000000000000, 0.6308317780574974600, 1.000000000000000000), + ( 1.000000000000000000, 0.6460014447384414500, 1.000000000000000000), + ( 1.000000000000000000, 0.6803297677627313500, 1.000000000000000000), + ( 1.000000000000000000, 0.6995544667852496800, 1.000000000000000000), + ( 1.000000000000000000, 0.7598224603682290900, 1.000000000000000000), + ( 1.000000000000000000, 0.8031356788999908200, 1.000000000000000000), + ( 1.000000000000000000, 0.8365390274333561700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1356 = CIRCLE ( 'NONE', #847, 3.189999999999994200 ) ; +#1357 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#1358 = CARTESIAN_POINT ( 'NONE', ( 6.175210994631164000, 7.597114959037286400, -9.999983233560549000 ) ) ; +#1359 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1360 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1361 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1362 = ORIENTED_EDGE ( 'NONE', *, *, #3916, .F. ) ; +#1363 = FACE_OUTER_BOUND ( 'NONE', #911, .T. ) ; +#1364 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#1365 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1366 = VERTEX_POINT ( 'NONE', #1299 ) ; +#1367 = AXIS2_PLACEMENT_3D ( 'NONE', #413, #386, #450 ) ; +#1368 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 12.49999753194997600, -4.999983233560546300 ) ) ; +#1369 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#1370 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -5.711846095760983600, -16.52307068911293800 ) ) ; +#1371 = ORIENTED_EDGE ( 'NONE', *, *, #4184, .T. ) ; +#1372 = ORIENTED_EDGE ( 'NONE', *, *, #2511, .F. ) ; +#1373 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1374 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1375 = AXIS2_PLACEMENT_3D ( 'NONE', #3696, #3506, #3494 ) ; +#1376 = VERTEX_POINT ( 'NONE', #1446 ) ; +#1377 = CIRCLE ( 'NONE', #1768, 1.000000000000000900 ) ; +#1378 = CARTESIAN_POINT ( 'NONE', ( 6.175210994631165700, 7.040985457330477500, -9.999983233560550700 ) ) ; +#1379 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.087887087724744200, -9.342762761780534200 ) ) ; +#1380 = CIRCLE ( 'NONE', #1055, 3.189999999999994200 ) ; +#1381 = VERTEX_POINT ( 'NONE', #1287 ) ; +#1382 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1383 = EDGE_LOOP ( 'NONE', ( #932, #968, #1023, #1076 ) ) ; +#1384 = PLANE ( 'NONE', #2079 ) ; +#1385 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, -6.631762177429775000, 7.500016766439451900 ) ) ; +#1386 = FACE_OUTER_BOUND ( 'NONE', #32, .T. ) ; +#1387 = ORIENTED_EDGE ( 'NONE', *, *, #3197, .T. ) ; +#1388 = AXIS2_PLACEMENT_3D ( 'NONE', #3397, #3384, #3367 ) ; +#1389 = LINE ( 'NONE', #986, #1331 ) ; +#1390 = CARTESIAN_POINT ( 'NONE', ( -3.355120137861331100, 7.499997531949971700, -6.370200813627633400 ) ) ; +#1391 = ORIENTED_EDGE ( 'NONE', *, *, #4208, .T. ) ; +#1392 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1393 = CARTESIAN_POINT ( 'NONE', ( -1.482556432406243000, 6.712316075493557600, -10.55586558965261500 ) ) ; +#1394 = ORIENTED_EDGE ( 'NONE', *, *, #3786, .F. ) ; +#1395 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999997300, 8.499997531949972500, -7.834640608427721800 ) ) ; +#1396 = CYLINDRICAL_SURFACE ( 'NONE', #1671, 1.000000000000000000 ) ; +#1397 = ORIENTED_EDGE ( 'NONE', *, *, #1774, .T. ) ; +#1398 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1399 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1400 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 2.499997531949969000, 14.00001676643945100 ) ) ; +#1401 = FACE_OUTER_BOUND ( 'NONE', #2726, .T. ) ; +#1402 = EDGE_CURVE ( 'NONE', #2218, #193, #1548, .T. ) ; +#1403 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 8.019335917570373600E-017 ) ) ; +#1404 = CARTESIAN_POINT ( 'NONE', ( -0.5172413793103443100, 4.714692804133610700, 14.00001676643945100 ) ) ; +#1405 = DIRECTION ( 'NONE', ( 1.701689570953044100E-015, 0.1942237708554718200, 0.9809572502584816800 ) ) ; +#1406 = EDGE_CURVE ( 'NONE', #3463, #2762, #1505, .T. ) ; +#1407 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 7.499997531949971700, -7.934876758034640400 ) ) ; +#1408 = CARTESIAN_POINT ( 'NONE', ( -0.03631932221365350600, 3.115576615112746400, -15.03197759121792400 ) ) ; +#1409 = FACE_OUTER_BOUND ( 'NONE', #487, .T. ) ; +#1410 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, 13.36823782257022600, -3.277205641478951700 ) ) ; +#1411 = EDGE_CURVE ( 'NONE', #4182, #2471, #3820, .T. ) ; +#1412 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1413 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.559374635020935700E-016, 1.000000000000000000 ) ) ; +#1414 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1415 = AXIS2_PLACEMENT_3D ( 'NONE', #3713, #3648, #3635 ) ; +#1416 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1417 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1418 = CARTESIAN_POINT ( 'NONE', ( 5.012778414273875600, 2.857238143957334200, -15.09560685253280500 ) ) ; +#1419 = ORIENTED_EDGE ( 'NONE', *, *, #3534, .T. ) ; +#1420 = CARTESIAN_POINT ( 'NONE', ( 7.318989928227290800, 7.452104359297651500, 8.193954255410384100 ) ) ; +#1421 = CIRCLE ( 'NONE', #2652, 7.249999999999999100 ) ; +#1422 = EDGE_LOOP ( 'NONE', ( #844, #3984, #1899, #1387, #1031, #4227 ) ) ; +#1423 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, -5.711846095760983600, -16.52307068911293800 ) ) ; +#1424 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1425 = ORIENTED_EDGE ( 'NONE', *, *, #4164, .F. ) ; +#1426 = ORIENTED_EDGE ( 'NONE', *, *, #445, .T. ) ; +#1427 = AXIS2_PLACEMENT_3D ( 'NONE', #309, #307, #301 ) ; +#1428 = VECTOR ( 'NONE', #2498, 1000.000000000000000 ) ; +#1429 = ORIENTED_EDGE ( 'NONE', *, *, #891, .F. ) ; +#1430 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #804, #910, #793 ), + ( #775, #758, #748 ), + ( #738, #730, #717 ), + ( #705, #695, #671 ), + ( #662, #654, #650 ), + ( #643, #638, #633 ), + ( #612, #606, #599 ), + ( #594, #586, #574 ), + ( #971, #955, #945 ), + ( #555, #550, #541 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -3.361026734705063700E-018, 0.0003476713157923538300, 0.0006953426315847110100, 0.001043013947377068000, 0.001390685263169425300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8365390274333605000, 1.000000000000000000), + ( 1.000000000000000000, 0.8197514918407820000, 1.000000000000000000), + ( 1.000000000000000000, 0.8006313633828581200, 1.000000000000000000), + ( 1.000000000000000000, 0.7607511441411558600, 1.000000000000000000), + ( 1.000000000000000000, 0.7398346875988415200, 1.000000000000000000), + ( 1.000000000000000000, 0.6994720356537338400, 1.000000000000000000), + ( 1.000000000000000000, 0.6802309908374849500, 1.000000000000000000), + ( 1.000000000000000000, 0.6459754561301215300, 1.000000000000000000), + ( 1.000000000000000000, 0.6309625315798611500, 1.000000000000000000), + ( 1.000000000000000000, 0.6193624979931733300, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1431 = CARTESIAN_POINT ( 'NONE', ( -1.925061603609905500, 8.444532389926747500, 7.409333028147798900 ) ) ; +#1432 = DIRECTION ( 'NONE', ( -0.07036808095234416100, 0.9823665072671574600, 0.1732177201755367700 ) ) ; +#1433 = ADVANCED_FACE ( 'NONE', ( #1444 ), #1396, .T. ) ; +#1434 = ORIENTED_EDGE ( 'NONE', *, *, #1011, .F. ) ; +#1435 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #1357, 'distance_accuracy_value', 'NONE'); +#1436 = LINE ( 'NONE', #3027, #1494 ) ; +#1437 = EDGE_CURVE ( 'NONE', #2878, #4220, #1436, .T. ) ; +#1438 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -14.13176217742977400, -11.35960056912458200 ) ) ; +#1439 = CARTESIAN_POINT ( 'NONE', ( -3.138085476252702800, 7.140393453232860600, -10.53441666786130200 ) ) ; +#1440 = VERTEX_POINT ( 'NONE', #2944 ) ; +#1441 = AXIS2_PLACEMENT_3D ( 'NONE', #3551, #3539, #3522 ) ; +#1442 = CARTESIAN_POINT ( 'NONE', ( -2.650747435743403500, 7.471560578764293600, 8.037488667106410700 ) ) ; +#1443 = ORIENTED_EDGE ( 'NONE', *, *, #3667, .F. ) ; +#1444 = FACE_OUTER_BOUND ( 'NONE', #3577, .T. ) ; +#1445 = VERTEX_POINT ( 'NONE', #1039 ) ; +#1446 = CARTESIAN_POINT ( 'NONE', ( 8.109345979613396000, 7.128758421777396500, -10.57608893798829700 ) ) ; +#1447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1448 = FACE_OUTER_BOUND ( 'NONE', #4175, .T. ) ; +#1449 = VERTEX_POINT ( 'NONE', #1018 ) ; +#1450 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 7.499997531949971700, -6.616646463797430000 ) ) ; +#1451 = CARTESIAN_POINT ( 'NONE', ( -2.791258574066163500, 7.480980476026855000, 7.947706322004534300 ) ) ; +#1452 = CARTESIAN_POINT ( 'NONE', ( 8.232050807568882100, 7.499997531949972500, 7.500016766439453700 ) ) ; +#1453 = LINE ( 'NONE', #183, #3807 ) ; +#1454 = CARTESIAN_POINT ( 'NONE', ( 5.022030455211658600, 2.986400329683244900, -15.06258342409821400 ) ) ; +#1455 = CARTESIAN_POINT ( 'NONE', ( -3.498506681328513900, 7.391593752587464600, -8.870153241979331000 ) ) ; +#1456 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, 2.109289132199380700, -12.97112658808280400 ) ) ; +#1457 = ADVANCED_FACE ( 'NONE', ( #1544 ), #1336, .T. ) ; +#1458 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1459 = CARTESIAN_POINT ( 'NONE', ( -3.992619356897360000, 7.463731536043495900, -8.529385879532990000 ) ) ; +#1460 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1461 = CARTESIAN_POINT ( 'NONE', ( -2.075373717751786800, 8.465873185060234000, 7.322499906443643300 ) ) ; +#1462 = CARTESIAN_POINT ( 'NONE', ( 7.123340850354696700, 7.552052001408775100, 7.289280781439285500 ) ) ; +#1463 = EDGE_CURVE ( 'NONE', #1793, #2878, #1377, .T. ) ; +#1464 = AXIS2_PLACEMENT_3D ( 'NONE', #3979, #3874, #3863 ) ; +#1465 = DIRECTION ( 'NONE', ( -0.4531373511443544400, -0.1357142370231672600, -0.8810494803738879700 ) ) ; +#1466 = CARTESIAN_POINT ( 'NONE', ( -0.02203045521165824700, 2.986400329683245300, -15.06258342409821600 ) ) ; +#1467 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#1468 = CARTESIAN_POINT ( 'NONE', ( -4.494937180754203800, 7.499997531949969900, -8.182959794114474100 ) ) ; +#1469 = CARTESIAN_POINT ( 'NONE', ( 2.249999999999999600, 2.282139502573950400, -12.94064840416031700 ) ) ; +#1470 = EDGE_CURVE ( 'NONE', #710, #2878, #1389, .T. ) ; +#1471 = CARTESIAN_POINT ( 'NONE', ( 0.8016510060189577800, 4.318056864335048300, 15.00001676643945100 ) ) ; +#1472 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#1473 = MANIFOLD_SOLID_BREP ( 'Fillet12', #3940 ) ; +#1474 = ORIENTED_EDGE ( 'NONE', *, *, #2400, .F. ) ; +#1475 = VECTOR ( 'NONE', #3954, 1000.000000000000000 ) ; +#1476 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.559374635020935700E-016, 1.000000000000000000 ) ) ; +#1477 = CARTESIAN_POINT ( 'NONE', ( 6.699654286513893300, 7.570164066172995200, 7.484923209591871200 ) ) ; +#1478 = ADVANCED_FACE ( 'NONE', ( #1448 ), #1430, .T. ) ; +#1479 = ORIENTED_EDGE ( 'NONE', *, *, #1903, .F. ) ; +#1480 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -13.13176217742977600, -12.24597178207973200 ) ) ; +#1481 = PLANE ( 'NONE', #690 ) ; +#1482 = ORIENTED_EDGE ( 'NONE', *, *, #616, .T. ) ; +#1483 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999985800, 7.499997531949970800, -7.834640608427736000 ) ) ; +#1484 = VERTEX_POINT ( 'NONE', #467 ) ; +#1485 = EDGE_CURVE ( 'NONE', #3686, #2374, #1288, .T. ) ; +#1486 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999996200, 8.499997531949969000, 6.500016766439451000 ) ) ; +#1487 = VERTEX_POINT ( 'NONE', #492 ) ; +#1488 = VECTOR ( 'NONE', #1225, 1000.000000000000000 ) ; +#1489 = TOROIDAL_SURFACE ( 'NONE', #222, 7.249999999999999100, 2.250000000000000000 ) ; +#1490 = EDGE_LOOP ( 'NONE', ( #1419, #1474, #1530, #1571 ) ) ; +#1491 = EDGE_CURVE ( 'NONE', #426, #1683, #1279, .T. ) ; +#1492 = ORIENTED_EDGE ( 'NONE', *, *, #2007, .F. ) ; +#1493 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2649, #2635, #2570, #2551, #2540, #2532, #2516, #2500, #2493, #2483 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 4.336808689942017700E-019, 0.0004967310670608633000, 0.0009934621341217261700, 0.001490193201182588900, 0.001986924268243452800 ), + .UNSPECIFIED. ) ; +#1494 = VECTOR ( 'NONE', #1208, 1000.000000000000000 ) ; +#1495 = CARTESIAN_POINT ( 'NONE', ( -3.498506681328513900, 7.391593752587464600, -8.870153241979331000 ) ) ; +#1496 = CARTESIAN_POINT ( 'NONE', ( -2.123649741342782600, 7.552021020598704800, 7.289035310967822300 ) ) ; +#1497 = CARTESIAN_POINT ( 'NONE', ( -4.402142229856165700, 7.499997531953442700, -8.432498378571120100 ) ) ; +#1498 = VERTEX_POINT ( 'NONE', #405 ) ; +#1499 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 7.499997531949971700, -4.999983233560546300 ) ) ; +#1500 = VECTOR ( 'NONE', #1399, 1000.000000000000000 ) ; +#1501 = ORIENTED_EDGE ( 'NONE', *, *, #1470, .T. ) ; +#1502 = EDGE_LOOP ( 'NONE', ( #3462, #3259, #1082, #3802 ) ) ; +#1503 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1504 = ADVANCED_FACE ( 'NONE', ( #1386 ), #827, .F. ) ; +#1505 = LINE ( 'NONE', #1241, #1488 ) ; +#1506 = CARTESIAN_POINT ( 'NONE', ( 8.278554101679947800, 8.247747006236153300, -9.914721068897783600 ) ) ; +#1507 = ORIENTED_EDGE ( 'NONE', *, *, #3760, .F. ) ; +#1508 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.499997531949970300, 2.891202939038461700E-016 ) ) ; +#1509 = AXIS2_PLACEMENT_3D ( 'NONE', #4021, #4016, #4012 ) ; +#1510 = VECTOR ( 'NONE', #1570, 1000.000000000000000 ) ; +#1511 = CARTESIAN_POINT ( 'NONE', ( -3.548078261658295300, 7.356145022973251500, -9.037607376464928100 ) ) ; +#1512 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1513 = CARTESIAN_POINT ( 'NONE', ( -3.246554370873891800, 7.193677170663345800, -9.588086237553829600 ) ) ; +#1514 = CARTESIAN_POINT ( 'NONE', ( 8.500000000000003600, 7.499997531949969900, 6.500016766439446600 ) ) ; +#1515 = VECTOR ( 'NONE', #365, 1000.000000000000000 ) ; +#1516 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 7.499997531949971700, -8.189983233560539600 ) ) ; +#1517 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 7.499997531949971700, -4.999983233560546300 ) ) ; +#1518 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1519 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999500, 12.49999753194997300, 12.50001676643944900 ) ) ; +#1520 = EDGE_CURVE ( 'NONE', #710, #2548, #833, .T. ) ; +#1521 = ADVANCED_FACE ( 'NONE', ( #1231 ), #1180, .F. ) ; +#1522 = AXIS2_PLACEMENT_3D ( 'NONE', #308, #4140, #2077 ) ; +#1523 = ORIENTED_EDGE ( 'NONE', *, *, #3588, .T. ) ; +#1524 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 7.499997531949970800, 8.673614525627818800E-016 ) ) ; +#1525 = CARTESIAN_POINT ( 'NONE', ( 2.231471299302881600, 2.627288019610056800, -12.87978940825533600 ) ) ; +#1526 = AXIS2_PLACEMENT_3D ( 'NONE', #548, #923, #610 ) ; +#1527 = EDGE_LOOP ( 'NONE', ( #196, #617 ) ) ; +#1528 = VECTOR ( 'NONE', #131, 1000.000000000000000 ) ; +#1529 = ORIENTED_EDGE ( 'NONE', *, *, #1856, .F. ) ; +#1530 = ORIENTED_EDGE ( 'NONE', *, *, #2456, .F. ) ; +#1531 = CARTESIAN_POINT ( 'NONE', ( -2.188195709835911300, 7.544253522388070900, 7.231730966012835700 ) ) ; +#1532 = EDGE_LOOP ( 'NONE', ( #244, #1947, #253, #296 ) ) ; +#1533 = FACE_OUTER_BOUND ( 'NONE', #2150, .T. ) ; +#1534 = VERTEX_POINT ( 'NONE', #401 ) ; +#1535 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#1536 = ORIENTED_EDGE ( 'NONE', *, *, #2430, .T. ) ; +#1537 = CARTESIAN_POINT ( 'NONE', ( 6.175210994631166600, 6.747595387856069500, -10.47242612937174000 ) ) ; +#1538 = VECTOR ( 'NONE', #1602, 1000.000000000000000 ) ; +#1539 = EDGE_CURVE ( 'NONE', #3883, #1686, #1192, .T. ) ; +#1540 = ORIENTED_EDGE ( 'NONE', *, *, #3900, .F. ) ; +#1541 = CARTESIAN_POINT ( 'NONE', ( 4.620689655172414600, 5.157631858570337800, 15.00001676643945100 ) ) ; +#1542 = VERTEX_POINT ( 'NONE', #232 ) ; +#1543 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #873, #4062, #750 ), + ( #747, #740, #707 ), + ( #702, #696, #694 ), + ( #680, #676, #657 ), + ( #649, #645, #575 ), + ( #556, #551, #543 ), + ( #526, #511, #493 ), + ( #462, #452, #449 ), + ( #435, #429, #420 ), + ( #416, #407, #404 ), + ( #395, #391, #375 ), + ( #373, #362, #283 ), + ( #275, #263, #250 ), + ( #233, #225, #215 ), + ( #197, #169, #158 ), + ( #136, #125, #122 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 3.141592653589793100, 3.337942194439155400, 3.534291735288517300, 3.730641276137879100, 3.926990816987241400, 4.123340357836603700, 4.319689898685965100, 4.712388980384689700 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7070717282746452600, 1.000000000000000000), + ( 1.000000000000000000, 0.7117460026659008200, 1.000000000000000000), + ( 1.000000000000000000, 0.7291288938774156400, 1.000000000000000000), + ( 1.000000000000000000, 0.7418334180702755900, 1.000000000000000000), + ( 1.000000000000000000, 0.7723968216269278000, 1.000000000000000000), + ( 1.000000000000000000, 0.7902180088125833100, 1.000000000000000000), + ( 1.000000000000000000, 0.8275942694307574200, 1.000000000000000000), + ( 1.000000000000000000, 0.8471316605534751100, 1.000000000000000000), + ( 1.000000000000000000, 0.8849191470154027500, 1.000000000000000000), + ( 1.000000000000000000, 0.9031650994917732600, 1.000000000000000000), + ( 1.000000000000000000, 0.9360421841946218200, 1.000000000000000000), + ( 1.000000000000000000, 0.9506740354437552800, 1.000000000000000000), + ( 1.000000000000000000, 0.9867291887559579400, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1544 = FACE_OUTER_BOUND ( 'NONE', #1383, .T. ) ; +#1545 = ORIENTED_EDGE ( 'NONE', *, *, #2097, .T. ) ; +#1546 = EDGE_CURVE ( 'NONE', #2163, #80, #1137, .T. ) ; +#1547 = DIRECTION ( 'NONE', ( 7.228014483236695800E-017, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1548 = LINE ( 'NONE', #1268, #1500 ) ; +#1549 = EDGE_LOOP ( 'NONE', ( #2249, #2271, #2316, #2364 ) ) ; +#1550 = CARTESIAN_POINT ( 'NONE', ( 7.499748909657387100, 8.375339491575717300, -9.025802554688150200 ) ) ; +#1551 = EDGE_CURVE ( 'NONE', #772, #3663, #1186, .T. ) ; +#1552 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, -6.631762177429775000, 7.500016766439451900 ) ) ; +#1553 = PERSON_AND_ORGANIZATION ( #1256, #2848 ) ; +#1554 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000400, 9.999997531949972500, -14.99998323356054700 ) ) ; +#1555 = DIRECTION ( 'NONE', ( 9.912705577010326800E-017, -2.840948884026568200E-049, 1.000000000000000000 ) ) ; +#1556 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #454, #4067, #2389 ), + ( #128, #2049, #4053 ), + ( #1718, #3722, #1393 ), + ( #3393, #1058, #3051 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0003257081080810939000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8739442499921847900, 1.000000000000000000), + ( 1.000000000000000000, 0.8623358751931515800, 1.000000000000000000), + ( 1.000000000000000000, 0.8498443457903557300, 1.000000000000000000), + ( 1.000000000000000000, 0.8365390274333596200, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1557 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1558 = CARTESIAN_POINT ( 'NONE', ( 1.249999999999985600, -14.13176217742977800, 7.500016766439451000 ) ) ; +#1559 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 8.499997531949969000, 15.00001676643945100 ) ) ; +#1560 = CARTESIAN_POINT ( 'NONE', ( -2.145629287726636300, 8.477177068088483500, 7.268630500583968000 ) ) ; +#1561 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.019335917570382200E-017, 1.000000000000000000 ) ) ; +#1562 = LINE ( 'NONE', #448, #1515 ) ; +#1563 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1564 = CARTESIAN_POINT ( 'NONE', ( -3.037845056115504100, 7.495195567119167500, 7.742119258761773500 ) ) ; +#1565 = ADVANCED_FACE ( 'NONE', ( #1284 ), #1026, .T. ) ; +#1566 = PERSON_AND_ORGANIZATION ( #1256, #2848 ) ; +#1567 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#1568 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000004400, 8.416077315049584200, 7.500016766439451000 ) ) ; +#1569 = EDGE_CURVE ( 'NONE', #3351, #3949, #1235, .T. ) ; +#1570 = DIRECTION ( 'NONE', ( 1.368455531567204200E-048, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#1571 = ORIENTED_EDGE ( 'NONE', *, *, #2097, .F. ) ; +#1572 = CIRCLE ( 'NONE', #3567, 1.000000000000000900 ) ; +#1573 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999996200, 12.49999753194997300, 6.500016766439451900 ) ) ; +#1574 = CARTESIAN_POINT ( 'NONE', ( -3.584089846711280700, 7.335195530988476900, -9.211445912257804700 ) ) ; +#1575 = CARTESIAN_POINT ( 'NONE', ( 2.243821133722542400, 2.454879399963496100, -12.91018969960573100 ) ) ; +#1576 = VERTEX_POINT ( 'NONE', #67 ) ; +#1577 = AXIS2_PLACEMENT_3D ( 'NONE', #3683, #3677, #3657 ) ; +#1578 = CARTESIAN_POINT ( 'NONE', ( 6.588479140882493600, 8.416077315049582500, 7.500016766439444800 ) ) ; +#1579 = ORIENTED_EDGE ( 'NONE', *, *, #2784, .T. ) ; +#1580 = EDGE_LOOP ( 'NONE', ( #2061, #959, #1598, #3987 ) ) ; +#1581 = ADVANCED_FACE ( 'NONE', ( #1021 ), #928, .T. ) ; +#1582 = ORIENTED_EDGE ( 'NONE', *, *, #1046, .T. ) ; +#1583 = LINE ( 'NONE', #1352, #1538 ) ; +#1584 = DIRECTION ( 'NONE', ( 1.156482317317871500E-016, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#1585 = ORIENTED_EDGE ( 'NONE', *, *, #1680, .T. ) ; +#1586 = ORIENTED_EDGE ( 'NONE', *, *, #2330, .F. ) ; +#1587 = CIRCLE ( 'NONE', #1871, 0.9999999999999995600 ) ; +#1588 = EDGE_LOOP ( 'NONE', ( #2730, #2774, #2822, #2873 ) ) ; +#1589 = CARTESIAN_POINT ( 'NONE', ( -3.613029594828415900, 7.308093699090173700, -9.561237617882200700 ) ) ; +#1590 = CARTESIAN_POINT ( 'NONE', ( -2.268922527364193500, 8.494235170906755200, 7.145278261027376800 ) ) ; +#1591 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#1592 = CARTESIAN_POINT ( 'NONE', ( 5.018058391390563400, 3.178797307505135400, -12.81658221703716000 ) ) ; +#1593 = CIRCLE ( 'NONE', #1823, 0.9999999999999995600 ) ; +#1594 = ORIENTED_EDGE ( 'NONE', *, *, #408, .T. ) ; +#1595 = ORIENTED_EDGE ( 'NONE', *, *, #2215, .T. ) ; +#1596 = EDGE_CURVE ( 'NONE', #3723, #915, #981, .T. ) ; +#1597 = CIRCLE ( 'NONE', #1893, 2.249999999999998700 ) ; +#1598 = ORIENTED_EDGE ( 'NONE', *, *, #3864, .F. ) ; +#1599 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, 9.999997531949972500, -14.99998323356054700 ) ) ; +#1600 = CARTESIAN_POINT ( 'NONE', ( 5.411263854708441700, 4.500183987514276400, 13.91871496203661000 ) ) ; +#1601 = LINE ( 'NONE', #1554, #745 ) ; +#1602 = DIRECTION ( 'NONE', ( 9.912705577010325500E-017, -1.982541115402065100E-016, 1.000000000000000000 ) ) ; +#1603 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1604 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1605 = ADVANCED_FACE ( 'NONE', ( #972 ), #1086, .T. ) ; +#1606 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999995100, 2.499997531949971200, -7.834640608427721800 ) ) ; +#1607 = CARTESIAN_POINT ( 'NONE', ( 6.674788356984029400, 8.420107758365334800, 7.488480915713344300 ) ) ; +#1608 = CIRCLE ( 'NONE', #871, 2.249999999999999600 ) ; +#1609 = CARTESIAN_POINT ( 'NONE', ( 3.878674723056325200, 3.440231611507882400, 15.00001676643945100 ) ) ; +#1610 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1611 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2858, #2836, #2806, #2791, #2773, #2754, #2736, #2714 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.001907009871576102200, 0.002303718238964158500, 0.002700426606352212500, 0.003493843341128321700 ), + .UNSPECIFIED. ) ; +#1612 = EDGE_CURVE ( 'NONE', #2218, #2411, #789, .T. ) ; +#1613 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, 2.499997531949969000, 14.75001676643945100 ) ) ; +#1614 = CARTESIAN_POINT ( 'NONE', ( -0.6698729810778008000, 4.999997531949977900, -14.99998323356054700 ) ) ; +#1615 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1616 = CARTESIAN_POINT ( 'NONE', ( 6.843328791122305100, 8.434319696945390600, 7.443275842899058900 ) ) ; +#1617 = EDGE_CURVE ( 'NONE', #3888, #132, #1029, .T. ) ; +#1618 = ADVANCED_FACE ( 'NONE', ( #782 ), #16, .F. ) ; +#1619 = ORIENTED_EDGE ( 'NONE', *, *, #681, .F. ) ; +#1620 = LINE ( 'NONE', #164, #1528 ) ; +#1621 = CARTESIAN_POINT ( 'NONE', ( -2.293067363697358600, 7.524517505251206600, 7.115331808345308300 ) ) ; +#1622 = EDGE_CURVE ( 'NONE', #339, #2548, #735, .T. ) ; +#1623 = ORIENTED_EDGE ( 'NONE', *, *, #3477, .F. ) ; +#1624 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000004400, 8.416077315049586000, 8.500016766439445700 ) ) ; +#1625 = VERTEX_POINT ( 'NONE', #1614 ) ; +#1626 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 8.019335917570373600E-017, 1.000000000000000000 ) ) ; +#1627 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#1628 = CYLINDRICAL_SURFACE ( 'NONE', #3644, 2.250000000000000400 ) ; +#1629 = ORIENTED_EDGE ( 'NONE', *, *, #2812, .F. ) ; +#1630 = AXIS2_PLACEMENT_3D ( 'NONE', #434, #276, #223 ) ; +#1631 = CARTESIAN_POINT ( 'NONE', ( 6.924981003548807300, 8.444523939006769500, 7.409349071540423100 ) ) ; +#1632 = ORIENTED_EDGE ( 'NONE', *, *, #3916, .T. ) ; +#1633 = CIRCLE ( 'NONE', #1951, 1.000000000000000000 ) ; +#1634 = ORIENTED_EDGE ( 'NONE', *, *, #3605, .F. ) ; +#1635 = VERTEX_POINT ( 'NONE', #2917 ) ; +#1636 = CARTESIAN_POINT ( 'NONE', ( -2.321935172789157100, 8.499997523634284800, 7.076383286640719900 ) ) ; +#1637 = VECTOR ( 'NONE', #1659, 1000.000000000000000 ) ; +#1638 = ORIENTED_EDGE ( 'NONE', *, *, #2146, .T. ) ; +#1639 = CIRCLE ( 'NONE', #1977, 1.000000000000000900 ) ; +#1640 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1641 = ADVANCED_FACE ( 'NONE', ( #728 ), #3290, .T. ) ; +#1642 = ORIENTED_EDGE ( 'NONE', *, *, #1826, .T. ) ; +#1643 = CARTESIAN_POINT ( 'NONE', ( 6.839224809268296600, 6.449225214279879400, -10.99541579916112300 ) ) ; +#1644 = AXIS2_PLACEMENT_3D ( 'NONE', #1338, #1005, #1002 ) ; +#1645 = FACE_OUTER_BOUND ( 'NONE', #4226, .T. ) ; +#1646 = EDGE_CURVE ( 'NONE', #339, #3775, #686, .T. ) ; +#1647 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, -6.631762177429775000, 12.50001676643945100 ) ) ; +#1648 = AXIS2_PLACEMENT_3D ( 'NONE', #346, #340, #329 ) ; +#1649 = CARTESIAN_POINT ( 'NONE', ( -3.565461751398898200, 7.289788760521457100, -9.914721068902245800 ) ) ; +#1650 = VECTOR ( 'NONE', #390, 1000.000000000000000 ) ; +#1651 = CARTESIAN_POINT ( 'NONE', ( -3.565461751398230300, 7.289788760521271400, -9.914721068901798200 ) ) ; +#1652 = CARTESIAN_POINT ( 'NONE', ( 5.012778414273874700, 2.857238143957335100, -15.09560685253280500 ) ) ; +#1653 = CARTESIAN_POINT ( 'NONE', ( -3.109345979613404000, 7.128758421777398300, -10.57608893798828100 ) ) ; +#1654 = CARTESIAN_POINT ( 'NONE', ( 2.169124467740429100, 3.244746686838866400, -12.77886437928318800 ) ) ; +#1655 = CARTESIAN_POINT ( 'NONE', ( -1.439376289047537000, 6.446646084471113100, -12.99754498930879300 ) ) ; +#1656 = CARTESIAN_POINT ( 'NONE', ( 4.985275598499077500, 2.473287854180399800, -12.90694379245415400 ) ) ; +#1657 = APPROVAL_DATE_TIME ( #1758, #3959 ) ; +#1658 = ADVANCED_FACE ( 'NONE', ( #722, #675, #682, #742 ), #2940, .F. ) ; +#1659 = DIRECTION ( 'NONE', ( 9.912705577010326800E-017, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#1660 = CARTESIAN_POINT ( 'NONE', ( -2.469852177309046000, 6.961654659354185700, -9.300687349426880200 ) ) ; +#1661 = CARTESIAN_POINT ( 'NONE', ( 2.768528700697118900, 2.627288019610056800, -12.87978940825533800 ) ) ; +#1662 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3120, #3163, #3083 ), + ( #3078, #3075, #3070 ), + ( #3050, #3041, #3032 ), + ( #3028, #3018, #3015 ), + ( #2982, #209, #189 ), + ( #179, #2976, #2967 ), + ( #2962, #2954, #2950 ), + ( #2939, #2928, #2916 ), + ( #2912, #2908, #2902 ), + ( #2896, #2889, #2874 ), + ( #2863, #2859, #2855 ), + ( #2851, #2840, #2832 ), + ( #2820, #2814, #2807 ), + ( #2802, #2799, #2792 ), + ( #2788, #2782, #2775 ), + ( #2767, #2760, #2755 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 6.283185307179586200, 6.479534848028948500, 6.675884388878310800, 6.872233929727672200, 7.068583470577034500, 7.264933011426396800, 7.461282552275758200, 7.853981633974482800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7070717282746033000, 1.000000000000000000), + ( 1.000000000000000000, 0.7117460026659558900, 1.000000000000000000), + ( 1.000000000000000000, 0.7291288938773599100, 1.000000000000000000), + ( 1.000000000000000000, 0.7418334180703037900, 1.000000000000000000), + ( 1.000000000000000000, 0.7723968216268994900, 1.000000000000000000), + ( 1.000000000000000000, 0.7902180088125834200, 1.000000000000000000), + ( 1.000000000000000000, 0.8275942694307575300, 1.000000000000000000), + ( 1.000000000000000000, 0.8471316605534416900, 1.000000000000000000), + ( 1.000000000000000000, 0.8849191470154337300, 1.000000000000000000), + ( 1.000000000000000000, 0.9031650994917732600, 1.000000000000000000), + ( 1.000000000000000000, 0.9360421841946218200, 1.000000000000000000), + ( 1.000000000000000000, 0.9506740354437552800, 1.000000000000000000), + ( 1.000000000000000000, 0.9867291887559579400, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1663 = EDGE_CURVE ( 'NONE', #2411, #3424, #619, .T. ) ; +#1664 = CARTESIAN_POINT ( 'NONE', ( -3.606180608892043600, 7.301984022428553300, -9.741848127306905500 ) ) ; +#1665 = CARTESIAN_POINT ( 'NONE', ( -2.389277050838936900, 8.247747006235531600, -9.457352151231173600 ) ) ; +#1666 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.146386871659069100E-032, 9.912705577010326800E-017 ) ) ; +#1667 = EDGE_LOOP ( 'NONE', ( #927, #970, #1009 ) ) ; +#1668 = CYLINDRICAL_SURFACE ( 'NONE', #3127, 1.000000000000000900 ) ; +#1669 = EDGE_CURVE ( 'NONE', #3849, #4091, #627, .T. ) ; +#1670 = CARTESIAN_POINT ( 'NONE', ( 7.149899333101340700, 8.476448105639768500, 7.279508417930890700 ) ) ; +#1671 = AXIS2_PLACEMENT_3D ( 'NONE', #1064, #1184, #1083 ) ; +#1672 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #316, #3921, #3270 ), + ( #1266, #3599, #1600 ), + ( #3934, #1926, #10 ), + ( #2274, #324, #2589 ), + ( #637, #2929, #954 ), + ( #3285, #1283, #3609 ), + ( #1609, #3951, #1941 ), + ( #21, #4230, #3256 ), + ( #2743, #3962, #2287 ), + ( #36, #2600, #3298 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.01348316528749106400, 0.01417480916392495000, 0.01486645304035883800, 0.01555809691679272500, 0.01624974079322661100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865463500, 1.000000000000000000), + ( 1.000000000000000000, 0.6783861390749516000, 1.000000000000000000), + ( 1.000000000000000000, 0.6489646441594278900, 1.000000000000000000), + ( 1.000000000000000000, 0.5913778701451681800, 1.000000000000000000), + ( 1.000000000000000000, 0.5631586044553208400, 1.000000000000000000), + ( 1.000000000000000000, 0.5123064170032724000, 1.000000000000000000), + ( 1.000000000000000000, 0.4896746356766636900, 1.000000000000000000), + ( 1.000000000000000000, 0.4569622556168901900, 1.000000000000000000), + ( 1.000000000000000000, 0.4470293446570022300, 1.000000000000000000), + ( 1.000000000000000000, 0.4472135954999582100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1673 = ORIENTED_EDGE ( 'NONE', *, *, #4128, .F. ) ; +#1674 = CARTESIAN_POINT ( 'NONE', ( -3.109345979613404000, 7.128758421777398300, -10.57608893798828100 ) ) ; +#1675 = CARTESIAN_POINT ( 'NONE', ( 5.022051113078279400, 2.986688721749745800, -15.06250968983814300 ) ) ; +#1676 = ORIENTED_EDGE ( 'NONE', *, *, #1927, .F. ) ; +#1677 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999994700, 7.499997531949969900, 6.500016766439451000 ) ) ; +#1678 = CARTESIAN_POINT ( 'NONE', ( -2.333228961312646900, 7.512620896735650300, 7.056821889339369500 ) ) ; +#1679 = CARTESIAN_POINT ( 'NONE', ( 4.986044845483782200, 2.623600903814260500, -12.87911178116812900 ) ) ; +#1680 = EDGE_CURVE ( 'NONE', #2708, #2205, #636, .T. ) ; +#1681 = ORIENTED_EDGE ( 'NONE', *, *, #2236, .T. ) ; +#1682 = EDGE_CURVE ( 'NONE', #2609, #2824, #3110, .T. ) ; +#1683 = VERTEX_POINT ( 'NONE', #1964 ) ; +#1684 = VECTOR ( 'NONE', #1734, 1000.000000000000000 ) ; +#1685 = FACE_OUTER_BOUND ( 'NONE', #421, .T. ) ; +#1686 = VERTEX_POINT ( 'NONE', #4079 ) ; +#1687 = CARTESIAN_POINT ( 'NONE', ( -2.366025403784434400, 7.499997531949969000, 7.000016766439451000 ) ) ; +#1688 = ADVANCED_FACE ( 'NONE', ( #540 ), #577, .F. ) ; +#1689 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1690 = VERTEX_POINT ( 'NONE', #1089 ) ; +#1691 = LINE ( 'NONE', #1677, #1637 ) ; +#1692 = CARTESIAN_POINT ( 'NONE', ( 5.036319322213653700, 3.115576615112746900, -15.03197759121792400 ) ) ; +#1693 = VERTEX_POINT ( 'NONE', #3084 ) ; +#1694 = CARTESIAN_POINT ( 'NONE', ( -3.600237960927616900, 7.300204204604384900, -9.767077777963619300 ) ) ; +#1695 = DIRECTION ( 'NONE', ( 1.000000000000000000, 5.731934358295345600E-033, -4.956352788505163400E-017 ) ) ; +#1696 = CIRCLE ( 'NONE', #2029, 1.000000000000000000 ) ; +#1697 = ORIENTED_EDGE ( 'NONE', *, *, #3282, .T. ) ; +#1698 = ORIENTED_EDGE ( 'NONE', *, *, #412, .F. ) ; +#1699 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -1.734723475976807100E-015 ) ) ; +#1700 = CARTESIAN_POINT ( 'NONE', ( -3.452233446894734700, 7.255876983184152500, -10.17890516468110800 ) ) ; +#1701 = CARTESIAN_POINT ( 'NONE', ( 2.781974119036071200, 2.833555502463099600, -12.84341888578552600 ) ) ; +#1702 = EDGE_CURVE ( 'NONE', #2932, #4086, #531, .T. ) ; +#1703 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 5.782411586589355700E-016, -1.000000000000000000 ) ) ; +#1704 = CARTESIAN_POINT ( 'NONE', ( -3.143857459214816500, 7.499997531949969000, 7.627312886956889100 ) ) ; +#1705 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000004400, 8.416077315049586000, 7.500016766439445700 ) ) ; +#1706 = EDGE_CURVE ( 'NONE', #3978, #3174, #494, .T. ) ; +#1707 = CIRCLE ( 'NONE', #2306, 0.9999999999999995600 ) ; +#1708 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1709 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 2.499997531949971200, -7.834640608427721800 ) ) ; +#1710 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 7.499997531949971700, -1.809983233560551500 ) ) ; +#1711 = CARTESIAN_POINT ( 'NONE', ( 5.036362555581995100, 3.115863631816348600, -15.03191490272196900 ) ) ; +#1712 = EDGE_CURVE ( 'NONE', #604, #27, #536, .T. ) ; +#1713 = ADVANCED_FACE ( 'NONE', ( #527 ), #1556, .T. ) ; +#1714 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1715 = CARTESIAN_POINT ( 'NONE', ( 4.993434729041489100, 2.774064115392306900, -12.85249047483509000 ) ) ; +#1716 = LINE ( 'NONE', #398, #1650 ) ; +#1717 = CARTESIAN_POINT ( 'NONE', ( -2.454865473683819600, 6.928903604823490000, -9.387121546700280200 ) ) ; +#1718 = CARTESIAN_POINT ( 'NONE', ( -1.392316202485957700, 7.605912917571138200, -9.999983233560549000 ) ) ; +#1719 = DIRECTION ( 'NONE', ( 1.626303258728252900E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1720 = CARTESIAN_POINT ( 'NONE', ( 7.366025403784441000, 8.499997531949970800, 7.000016766439449300 ) ) ; +#1721 = CARTESIAN_POINT ( 'NONE', ( -2.321332756439443500, 8.207048502513902800, -9.589458421269460700 ) ) ; +#1722 = CARTESIAN_POINT ( 'NONE', ( 2.802725687521608700, 3.039383442955979000, -12.80979827495930900 ) ) ; +#1723 = CARTESIAN_POINT ( 'NONE', ( 1.249999999999998000, -13.13176217742977800, -3.277205641478953400 ) ) ; +#1724 = CARTESIAN_POINT ( 'NONE', ( -3.294720872342638900, 7.204476263886613600, -10.40231654002987200 ) ) ; +#1725 = CARTESIAN_POINT ( 'NONE', ( 5.055776229144529800, 3.244746686838859700, -15.00376507616815400 ) ) ; +#1726 = EDGE_LOOP ( 'NONE', ( #1273, #1536, #1991 ) ) ; +#1727 = AXIS2_PLACEMENT_3D ( 'NONE', #432, #427, #418 ) ; +#1728 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1729 = CARTESIAN_POINT ( 'NONE', ( -2.443263731779340200, 6.889100705744061400, -9.461923528892253200 ) ) ; +#1730 = ADVANCED_FACE ( 'NONE', ( #392 ), #447, .T. ) ; +#1731 = EDGE_LOOP ( 'NONE', ( #2887, #160, #2376, #1067 ) ) ; +#1732 = ORIENTED_EDGE ( 'NONE', *, *, #1263, .T. ) ; +#1733 = EDGE_CURVE ( 'NONE', #4141, #4220, #3046, .T. ) ; +#1734 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1735 = CARTESIAN_POINT ( 'NONE', ( 7.277504716292361800, 8.499997531949969000, 7.153339094696657500 ) ) ; +#1736 = AXIS2_PLACEMENT_3D ( 'NONE', #921, #629, #561 ) ; +#1737 = ORIENTED_EDGE ( 'NONE', *, *, #834, .T. ) ; +#1738 = CYLINDRICAL_SURFACE ( 'NONE', #3764, 5.000000000000000000 ) ; +#1739 = ORIENTED_EDGE ( 'NONE', *, *, #1873, .T. ) ; +#1740 = ORIENTED_EDGE ( 'NONE', *, *, #3503, .T. ) ; +#1741 = CARTESIAN_POINT ( 'NONE', ( -2.226826428501650600, 8.145367015333018700, -9.701154651279216200 ) ) ; +#1742 = CARTESIAN_POINT ( 'NONE', ( 5.007485839364555600, 2.924157544190339100, -12.82715476906317100 ) ) ; +#1743 = CYLINDRICAL_SURFACE ( 'NONE', #4034, 2.249999999999998700 ) ; +#1744 = AXIS2_PLACEMENT_3D ( 'NONE', #464, #461, #458 ) ; +#1745 = ORIENTED_EDGE ( 'NONE', *, *, #786, .F. ) ; +#1746 = CIRCLE ( 'NONE', #2183, 1.200000000000005700 ) ; +#1747 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1904, #2497, #2360, #2349 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 2.126518695549738200, 2.992086482045220200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9385344700625568600, 0.9385344700625568600, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#1748 = CARTESIAN_POINT ( 'NONE', ( -3.109345979613404400, 7.128758421777399200, -10.57608893798828300 ) ) ; +#1749 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1750 = VERTEX_POINT ( 'NONE', #118 ) ; +#1751 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3082, #3489, #2850, #2831, #2801, #2766, #2742, #2695, #2686, #2668 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0002653891048586150000, 0.0005307782097172300000, 0.0007961673145758449400, 0.001061556419434460000 ), + .UNSPECIFIED. ) ; +#1752 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995600, 12.49999753194997300, 7.500016766439451900 ) ) ; +#1753 = DIRECTION ( 'NONE', ( 9.912705577010326800E-017, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1754 = VECTOR ( 'NONE', #1994, 1000.000000000000000 ) ; +#1755 = ORIENTED_EDGE ( 'NONE', *, *, #3310, .F. ) ; +#1756 = CARTESIAN_POINT ( 'NONE', ( -2.366025403784434800, 8.499997531949969000, 7.000016766439451000 ) ) ; +#1757 = CARTESIAN_POINT ( 'NONE', ( -0.05577622914452930200, 3.244746686838860100, -15.00376507616815400 ) ) ; +#1758 = DATE_AND_TIME ( #2626, #2530 ) ; +#1759 = ADVANCED_FACE ( 'NONE', ( #441 ), #799, .T. ) ; +#1760 = CARTESIAN_POINT ( 'NONE', ( 0.3793103448275843000, 5.157631858570338700, 15.00001676643945100 ) ) ; +#1761 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1762 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1763 = CIRCLE ( 'NONE', #2013, 1.000000000000000900 ) ; +#1764 = EDGE_CURVE ( 'NONE', #2824, #89, #345, .T. ) ; +#1765 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1766 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -6.087887087724744200, -9.342762761780534200 ) ) ; +#1767 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2706, #2960, #2702 ), + ( #2693, #2692, #2683 ), + ( #2677, #2662, #2658 ), + ( #2642, #2639, #2633 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 1.499287275856123100, 1.570796326794896600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7114797383807706100, 1.000000000000000000), + ( 1.000000000000000000, 0.7100290451182466000, 1.000000000000000000), + ( 1.000000000000000000, 0.7085701894644373900, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865474600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1768 = AXIS2_PLACEMENT_3D ( 'NONE', #901, #889, #859 ) ; +#1769 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 7.499997531949971700, -4.999983233560546300 ) ) ; +#1770 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.146386871659069000E-032, 9.912705577010326800E-017 ) ) ; +#1771 = FACE_OUTER_BOUND ( 'NONE', #3733, .T. ) ; +#1772 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1773 = CARTESIAN_POINT ( 'NONE', ( -2.422496168341217200, 8.267645180164111100, -9.392763155996579600 ) ) ; +#1774 = EDGE_CURVE ( 'NONE', #1233, #2607, #437, .T. ) ; +#1775 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1776 = CARTESIAN_POINT ( 'NONE', ( 8.500000000000003600, 8.499997531949972500, -7.834640608427721800 ) ) ; +#1777 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1778 = AXIS2_PLACEMENT_3D ( 'NONE', #2289, #2278, #2257 ) ; +#1779 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1780 = CARTESIAN_POINT ( 'NONE', ( 7.366025403784445500, 8.499997531949972500, 7.000016766439451000 ) ) ; +#1781 = ADVANCED_FACE ( 'NONE', ( #379 ), #154, .T. ) ; +#1782 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1783 = ORIENTED_EDGE ( 'NONE', *, *, #2295, .F. ) ; +#1784 = CARTESIAN_POINT ( 'NONE', ( -0.3244676879045324500, 5.028529439335229300, -14.61416246096614600 ) ) ; +#1785 = CIRCLE ( 'NONE', #2446, 5.000000000000000900 ) ; +#1786 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#1787 = PLANE ( 'NONE', #2133 ) ; +#1788 = CARTESIAN_POINT ( 'NONE', ( 1.249999999999985600, -6.631762177429777700, 7.500016766439451900 ) ) ; +#1789 = ORIENTED_EDGE ( 'NONE', *, *, #2186, .T. ) ; +#1790 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1480, #1816, #3818, #3479, #829, #3144, #1152, #787, #3100, #4014, #4107, #3582 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0004694206158593636300, 0.0009388412317187272600, 0.001173551539648409000, 0.001408261847578090900, 0.001877682463437459100 ), + .UNSPECIFIED. ) ; +#1791 = EDGE_CURVE ( 'NONE', #1534, #3351, #246, .T. ) ; +#1792 = CYLINDRICAL_SURFACE ( 'NONE', #3246, 1.200000000000005700 ) ; +#1793 = VERTEX_POINT ( 'NONE', #1100 ) ; +#1794 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 8.019335917570373600E-017 ) ) ; +#1795 = CARTESIAN_POINT ( 'NONE', ( 7.349416207531326100, 7.453737971668873600, 8.182485343032405800 ) ) ; +#1796 = EDGE_LOOP ( 'NONE', ( #4032, #2353, #143 ) ) ; +#1797 = LINE ( 'NONE', #2027, #1754 ) ; +#1798 = LINE ( 'NONE', #288, #1022 ) ; +#1799 = ORIENTED_EDGE ( 'NONE', *, *, #2377, .T. ) ; +#1800 = CARTESIAN_POINT ( 'NONE', ( 2.231471299302881600, 2.627288019610056800, -12.87978940825533600 ) ) ; +#1801 = ORIENTED_EDGE ( 'NONE', *, *, #1646, .F. ) ; +#1802 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1803 = CIRCLE ( 'NONE', #1963, 1.000000000000000000 ) ; +#1804 = ADVANCED_FACE ( 'NONE', ( #342 ), #70, .T. ) ; +#1805 = CARTESIAN_POINT ( 'NONE', ( 8.500000000000001800, 7.499997531949971700, -7.834640608427721800 ) ) ; +#1806 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 12.49999753194997600, -4.999983233560546300 ) ) ; +#1807 = CARTESIAN_POINT ( 'NONE', ( -2.115607587768042000, 8.054510599742885200, -9.788036085774416900 ) ) ; +#1808 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#1809 = VECTOR ( 'NONE', #2089, 1000.000000000000000 ) ; +#1810 = AXIS2_PLACEMENT_3D ( 'NONE', #648, #679, #660 ) ; +#1811 = ORIENTED_EDGE ( 'NONE', *, *, #3053, .F. ) ; +#1812 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #227, #115, #104 ), + ( #99, #71, #68 ), + ( #44, #35, #24 ), + ( #20, #9, #2 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 1.570796326794896600, 1.642305377733670000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7085701894644361700, 1.000000000000000000), + ( 1.000000000000000000, 0.7100290451182474900, 1.000000000000000000), + ( 1.000000000000000000, 0.7114797383807706100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1813 = CARTESIAN_POINT ( 'NONE', ( -3.060221113998783600, 7.601891418216801800, -5.284495556549788200 ) ) ; +#1814 = CARTESIAN_POINT ( 'NONE', ( 6.676335348686753200, 7.430064018943042500, 8.333350093402783500 ) ) ; +#1815 = ORIENTED_EDGE ( 'NONE', *, *, #3451, .F. ) ; +#1816 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -13.21772712507918600, -12.11332410805296100 ) ) ; +#1817 = PLANE ( 'NONE', #271 ) ; +#1818 = CARTESIAN_POINT ( 'NONE', ( 2.169124467740432700, 3.244746686838858800, -12.77886437928318800 ) ) ; +#1819 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1820 = CIRCLE ( 'NONE', #2403, 5.000000000000000900 ) ; +#1821 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -12.96664603309569800, -12.54328693733201100 ) ) ; +#1822 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1823 = AXIS2_PLACEMENT_3D ( 'NONE', #1333, #1313, #1305 ) ; +#1824 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999985800, 7.499997531949970800, -7.834640608427736000 ) ) ; +#1825 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999997300, 7.499997531949970800, -7.834640608427721800 ) ) ; +#1826 = EDGE_CURVE ( 'NONE', #2205, #3981, #149, .T. ) ; +#1827 = ADVANCED_FACE ( 'NONE', ( #93 ), #1080, .T. ) ; +#1828 = LINE ( 'NONE', #1118, #1156 ) ; +#1829 = CARTESIAN_POINT ( 'NONE', ( -0.05577622914453234100, 3.244746686838866800, -15.00376507616815000 ) ) ; +#1830 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -14.13176217742977400, -11.35960056912458200 ) ) ; +#1831 = CARTESIAN_POINT ( 'NONE', ( 1.249999999999985600, -13.13176217742977800, 7.500016766439451000 ) ) ; +#1832 = CARTESIAN_POINT ( 'NONE', ( 2.830875532259569100, 3.244746686838860100, -12.77886437928319200 ) ) ; +#1833 = CARTESIAN_POINT ( 'NONE', ( -4.513285556759436500, 7.499997531949969000, -8.540376551126536600 ) ) ; +#1834 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999995600, 7.499997531949968100, 6.500016766439451000 ) ) ; +#1835 = ORIENTED_EDGE ( 'NONE', *, *, #417, .T. ) ; +#1836 = ORIENTED_EDGE ( 'NONE', *, *, #1617, .T. ) ; +#1837 = LINE ( 'NONE', #1092, #367 ) ; +#1838 = CARTESIAN_POINT ( 'NONE', ( 1.250000000000000700, 2.499997531949969400, 15.00001676643945100 ) ) ; +#1839 = CARTESIAN_POINT ( 'NONE', ( -0.007485839364554649700, 2.924157544190343600, -12.82715476906316700 ) ) ; +#1840 = ORIENTED_EDGE ( 'NONE', *, *, #3109, .F. ) ; +#1841 = CARTESIAN_POINT ( 'NONE', ( -2.478437025288581000, 7.014446435209044300, -9.256621393552700600 ) ) ; +#1842 = ORIENTED_EDGE ( 'NONE', *, *, #1043, .F. ) ; +#1843 = EDGE_CURVE ( 'NONE', #3981, #2218, #931, .T. ) ; +#1844 = ADVANCED_FACE ( 'NONE', ( #48 ), #1131, .T. ) ; +#1845 = ORIENTED_EDGE ( 'NONE', *, *, #1074, .T. ) ; +#1846 = CARTESIAN_POINT ( 'NONE', ( 0.4500000000000018400, 2.499997531949969400, 13.40001676643945000 ) ) ; +#1847 = FACE_OUTER_BOUND ( 'NONE', #2320, .T. ) ; +#1848 = ORIENTED_EDGE ( 'NONE', *, *, #463, .T. ) ; +#1849 = EDGE_CURVE ( 'NONE', #736, #1291, #52, .T. ) ; +#1850 = ORIENTED_EDGE ( 'NONE', *, *, #380, .T. ) ; +#1851 = CIRCLE ( 'NONE', #2208, 3.189999999999994200 ) ; +#1852 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1853 = CIRCLE ( 'NONE', #15, 2.500000000000000400 ) ; +#1854 = VERTEX_POINT ( 'NONE', #2852 ) ; +#1855 = ORIENTED_EDGE ( 'NONE', *, *, #4056, .F. ) ; +#1856 = EDGE_CURVE ( 'NONE', #1993, #839, #41, .T. ) ; +#1857 = LINE ( 'NONE', #2087, #1809 ) ; +#1858 = ORIENTED_EDGE ( 'NONE', *, *, #2456, .T. ) ; +#1859 = ORIENTED_EDGE ( 'NONE', *, *, #126, .F. ) ; +#1860 = AXIS2_PLACEMENT_3D ( 'NONE', #419, #410, #406 ) ; +#1861 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000002200, -13.13176217742977800, -1.609652315192951200E-015 ) ) ; +#1862 = CIRCLE ( 'NONE', #2264, 1.200000000000005700 ) ; +#1863 = VERTEX_POINT ( 'NONE', #3867 ) ; +#1864 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1865 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1866 = FACE_BOUND ( 'NONE', #439, .T. ) ; +#1867 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1868 = CARTESIAN_POINT ( 'NONE', ( 2.830875532259570000, 3.244746686838859700, -12.77886437928319200 ) ) ; +#1869 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1870 = CYLINDRICAL_SURFACE ( 'NONE', #851, 0.9999999999999991100 ) ; +#1871 = AXIS2_PLACEMENT_3D ( 'NONE', #1395, #1382, #1373 ) ; +#1872 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9783192441263464100, 0.2071025267157655100 ) ) ; +#1873 = EDGE_CURVE ( 'NONE', #635, #2399, #100, .T. ) ; +#1874 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1875 = DIRECTION ( 'NONE', ( -0.03779981420324233400, 0.2069545170942349000, 0.9776200703240971500 ) ) ; +#1876 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1877 = AXIS2_PLACEMENT_3D ( 'NONE', #953, #943, #935 ) ; +#1878 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000700, 9.999997531949969000, 12.50001676643945100 ) ) ; +#1879 = CARTESIAN_POINT ( 'NONE', ( 8.500000000000001800, 2.499997531949971200, -7.834640608427721800 ) ) ; +#1880 = VERTEX_POINT ( 'NONE', #4183 ) ; +#1881 = VECTOR ( 'NONE', #4035, 1000.000000000000000 ) ; +#1882 = ORIENTED_EDGE ( 'NONE', *, *, #2959, .T. ) ; +#1883 = ORIENTED_EDGE ( 'NONE', *, *, #42, .T. ) ; +#1884 = CARTESIAN_POINT ( 'NONE', ( -3.498506681332543200, 8.369912996713779300, -9.077255768695245300 ) ) ; +#1885 = PRODUCT ( 'Trigger_Guard', 'Trigger_Guard', '', ( #1159 ) ) ; +#1886 = CARTESIAN_POINT ( 'NONE', ( 0.9205550765751451300, -14.13176217742977400, -11.35960056912458400 ) ) ; +#1887 = ORIENTED_EDGE ( 'NONE', *, *, #1733, .F. ) ; +#1888 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669296900, -0.9848077530122082400 ) ) ; +#1889 = CARTESIAN_POINT ( 'NONE', ( -2.421686170596881700, 6.847878330210639900, -9.548934993108630900 ) ) ; +#1890 = VERTEX_POINT ( 'NONE', #1868 ) ; +#1891 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1892 = CIRCLE ( 'NONE', #763, 2.000000000000000000 ) ; +#1893 = AXIS2_PLACEMENT_3D ( 'NONE', #1423, #1417, #1412 ) ; +#1894 = CYLINDRICAL_SURFACE ( 'NONE', #3975, 1.200000000000005700 ) ; +#1895 = ORIENTED_EDGE ( 'NONE', *, *, #3122, .F. ) ; +#1896 = VERTEX_POINT ( 'NONE', #894 ) ; +#1897 = CIRCLE ( 'NONE', #865, 5.000000000000000000 ) ; +#1898 = EDGE_CURVE ( 'NONE', #1943, #1010, #295, .T. ) ; +#1899 = ORIENTED_EDGE ( 'NONE', *, *, #3415, .T. ) ; +#1900 = AXIS2_PLACEMENT_3D ( 'NONE', #898, #893, #879 ) ; +#1901 = LINE ( 'NONE', #1752, #1684 ) ; +#1902 = ORIENTED_EDGE ( 'NONE', *, *, #2958, .T. ) ; +#1903 = EDGE_CURVE ( 'NONE', #1063, #1445, #287, .T. ) ; +#1904 = CARTESIAN_POINT ( 'NONE', ( -1.175210994631166800, 6.747595387856067700, -10.47242612937174600 ) ) ; +#1905 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -5.782411586589356700E-016 ) ) ; +#1906 = CARTESIAN_POINT ( 'NONE', ( -0.05577622914452930900, 3.244746686838859300, -15.00376507616815000 ) ) ; +#1907 = ADVANCED_FACE ( 'NONE', ( #203 ), #724, .T. ) ; +#1908 = CARTESIAN_POINT ( 'NONE', ( 3.749999999999999600, -6.631762177429775000, 14.00001676643945100 ) ) ; +#1909 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1910 = CARTESIAN_POINT ( 'NONE', ( 5.055776229144529800, 3.244746686838860100, -15.00376507616815400 ) ) ; +#1911 = CIRCLE ( 'NONE', #2495, 3.189999999999994200 ) ; +#1912 = CARTESIAN_POINT ( 'NONE', ( -0.007485839364552471800, 2.924157544190339600, -12.82715476906316700 ) ) ; +#1913 = CARTESIAN_POINT ( 'NONE', ( -1.175210994631167100, 7.597114959037289100, -9.999983233560549000 ) ) ; +#1914 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 8.499997531949969000, 15.00001676643945100 ) ) ; +#1915 = EDGE_CURVE ( 'NONE', #1487, #1993, #198, .T. ) ; +#1916 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -4.223092916832912100, -7.643662237486944700 ) ) ; +#1917 = LINE ( 'NONE', #668, #2082 ) ; +#1918 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1919 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122082400, 0.1736481776669298900 ) ) ; +#1920 = CARTESIAN_POINT ( 'NONE', ( 2.830875532259568700, 3.244746686838861500, -12.77886437928319200 ) ) ; +#1921 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1922 = CARTESIAN_POINT ( 'NONE', ( 5.324467687904535400, 5.028529439335229300, -14.61416246096614700 ) ) ; +#1923 = EDGE_CURVE ( 'NONE', #1230, #1498, #1853, .T. ) ; +#1924 = ADVANCED_FACE ( 'NONE', ( #256 ), #1743, .T. ) ; +#1925 = CARTESIAN_POINT ( 'NONE', ( -0.03636255558199084200, 3.115863631816324200, -15.03191490272166300 ) ) ; +#1926 = CARTESIAN_POINT ( 'NONE', ( 5.459533799072189300, 4.208396228958817700, 15.00001676643945300 ) ) ; +#1927 = EDGE_CURVE ( 'NONE', #2161, #3463, #2107, .T. ) ; +#1928 = ORIENTED_EDGE ( 'NONE', *, *, #4225, .T. ) ; +#1929 = ORIENTED_EDGE ( 'NONE', *, *, #3053, .T. ) ; +#1930 = AXIS2_PLACEMENT_3D ( 'NONE', #1114, #3297, #3319 ) ; +#1931 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1932 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #641, #653, #523, #509 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001743515233040981600, 0.001785185530890651200 ), + .UNSPECIFIED. ) ; +#1933 = CARTESIAN_POINT ( 'NONE', ( -3.565461751398898200, 7.289788760521457100, -9.914721068902245800 ) ) ; +#1934 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 7.499997531949969000, 14.00001676643945100 ) ) ; +#1935 = ORIENTED_EDGE ( 'NONE', *, *, #3585, .T. ) ; +#1936 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 7.499997531949971700, -4.999983233560546300 ) ) ; +#1937 = CARTESIAN_POINT ( 'NONE', ( -0.01805839138807247700, 3.178797307505115500, -12.81658221704045900 ) ) ; +#1938 = VERTEX_POINT ( 'NONE', #3242 ) ; +#1939 = ORIENTED_EDGE ( 'NONE', *, *, #2298, .T. ) ; +#1940 = VERTEX_POINT ( 'NONE', #3572 ) ; +#1941 = CARTESIAN_POINT ( 'NONE', ( 4.702587056259411600, 3.208255977046790000, 13.47904421329634600 ) ) ; +#1942 = VECTOR ( 'NONE', #3357, 1000.000000000000000 ) ; +#1943 = VERTEX_POINT ( 'NONE', #4214 ) ; +#1944 = ORIENTED_EDGE ( 'NONE', *, *, #2442, .T. ) ; +#1945 = LINE ( 'NONE', #2366, #2000 ) ; +#1946 = FACE_OUTER_BOUND ( 'NONE', #2624, .T. ) ; +#1947 = ORIENTED_EDGE ( 'NONE', *, *, #864, .T. ) ; +#1948 = PLANE ( 'NONE', #4013 ) ; +#1949 = ADVANCED_FACE ( 'NONE', ( #3219 ), #1894, .F. ) ; +#1950 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -5.006327233685850000, -16.76436826747344400 ) ) ; +#1951 = AXIS2_PLACEMENT_3D ( 'NONE', #1573, #1567, #1563 ) ; +#1952 = VERTEX_POINT ( 'NONE', #2005 ) ; +#1953 = VECTOR ( 'NONE', #1909, 1000.000000000000000 ) ; +#1954 = ORIENTED_EDGE ( 'NONE', *, *, #4103, .T. ) ; +#1955 = CARTESIAN_POINT ( 'NONE', ( -0.1203005075349385500, 3.673109000405688600, -14.91020487250207800 ) ) ; +#1956 = ORIENTED_EDGE ( 'NONE', *, *, #2462, .F. ) ; +#1957 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1958 = EDGE_CURVE ( 'NONE', #2399, #785, #1238, .T. ) ; +#1959 = LINE ( 'NONE', #2520, #1953 ) ; +#1960 = VERTEX_POINT ( 'NONE', #4010 ) ; +#1961 = PLANE ( 'NONE', #2241 ) ; +#1962 = PERSON_AND_ORGANIZATION ( #1256, #2848 ) ; +#1963 = AXIS2_PLACEMENT_3D ( 'NONE', #1486, #1472, #1458 ) ; +#1964 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -4.452896807675744000, -16.41292689845144500 ) ) ; +#1965 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1966 = CARTESIAN_POINT ( 'NONE', ( 18.96446609406726900, 8.499997531949969000, 15.00001676643944900 ) ) ; +#1967 = CARTESIAN_POINT ( 'NONE', ( 5.055776229144529800, 3.244746686838860100, -15.00376507616815400 ) ) ; +#1968 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1969 = ADVANCED_FACE ( 'NONE', ( #199 ), #698, .T. ) ; +#1970 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#1971 = EDGE_CURVE ( 'NONE', #89, #2207, #2834, .T. ) ; +#1972 = CARTESIAN_POINT ( 'NONE', ( -4.031713865608133500, 7.429430857516248200, -9.238655503295927200 ) ) ; +#1973 = CARTESIAN_POINT ( 'NONE', ( 2.197274312478184400, 3.039383442956002500, -12.80979827495930000 ) ) ; +#1974 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 2.499997531949971200, -7.834640608427721800 ) ) ; +#1975 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1976 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1977 = AXIS2_PLACEMENT_3D ( 'NONE', #1624, #1615, #1610 ) ; +#1978 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 7.499997531949971700, -4.999983233560546300 ) ) ; +#1979 = CARTESIAN_POINT ( 'NONE', ( 1.250000000000000700, -6.631762177429777700, 15.00001676643945100 ) ) ; +#1980 = ORIENTED_EDGE ( 'NONE', *, *, #3552, .F. ) ; +#1981 = FACE_OUTER_BOUND ( 'NONE', #2256, .T. ) ; +#1982 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 9.999997531949972500, -14.99998323356054700 ) ) ; +#1983 = PLANE ( 'NONE', #3345 ) ; +#1984 = EDGE_CURVE ( 'NONE', #1010, #2871, #1280, .T. ) ; +#1985 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1756, #1687, #836 ), + ( #1636, #1678, #1704 ), + ( #1590, #1621, #1564 ), + ( #1560, #1531, #1451 ), + ( #1461, #1496, #1442 ), + ( #1431, #1306, #1125 ), + ( #1088, #1165, #1053 ), + ( #1144, #1154, #999 ), + ( #1108, #1084, #982 ), + ( #885, #948, #958 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.006735750878045924600, 0.007257309558705097800, 0.007778868239364271900, 0.008300426920023446000, 0.008821985600682619200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7116147880098980800, 1.000000000000000000), + ( 1.000000000000000000, 0.7176559239135681400, 1.000000000000000000), + ( 1.000000000000000000, 0.7306285747083228800, 1.000000000000000000), + ( 1.000000000000000000, 0.7375146931941557500, 1.000000000000000000), + ( 1.000000000000000000, 0.7495030026240759900, 1.000000000000000000), + ( 1.000000000000000000, 0.7547465202524517000, 1.000000000000000000), + ( 1.000000000000000000, 0.7618311660851198000, 1.000000000000000000), + ( 1.000000000000000000, 0.7637671026135768300, 1.000000000000000000), + ( 1.000000000000000000, 0.7637626158259736000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1986 = AXIS2_PLACEMENT_3D ( 'NONE', #1202, #1150, #1141 ) ; +#1987 = ORIENTED_EDGE ( 'NONE', *, *, #2752, .T. ) ; +#1988 = ORIENTED_EDGE ( 'NONE', *, *, #3394, .F. ) ; +#1989 = CARTESIAN_POINT ( 'NONE', ( 0.006565270957489762600, 2.774064115392159500, -12.85249047483543800 ) ) ; +#1990 = ADVANCED_FACE ( 'NONE', ( #3846 ), #385, .T. ) ; +#1991 = ORIENTED_EDGE ( 'NONE', *, *, #2630, .F. ) ; +#1992 = FACE_OUTER_BOUND ( 'NONE', #3682, .T. ) ; +#1993 = VERTEX_POINT ( 'NONE', #2085 ) ; +#1994 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#1995 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1996 = VERTEX_POINT ( 'NONE', #1370 ) ; +#1997 = CARTESIAN_POINT ( 'NONE', ( -2.492710853326766800, 7.081941756936358500, -9.198061629654787900 ) ) ; +#1998 = EDGE_LOOP ( 'NONE', ( #1858, #1887, #1980, #2101 ) ) ; +#1999 = VERTEX_POINT ( 'NONE', #3379 ) ; +#2000 = VECTOR ( 'NONE', #2293, 1000.000000000000000 ) ; +#2001 = ORIENTED_EDGE ( 'NONE', *, *, #2643, .F. ) ; +#2002 = VECTOR ( 'NONE', #2541, 1000.000000000000000 ) ; +#2003 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000002200, -14.13176217742977600, -3.277205641478954800 ) ) ; +#2004 = ORIENTED_EDGE ( 'NONE', *, *, #4115, .T. ) ; +#2005 = CARTESIAN_POINT ( 'NONE', ( 8.565461751399956500, 7.289788760521789300, -9.914721068897783600 ) ) ; +#2006 = ORIENTED_EDGE ( 'NONE', *, *, #1257, .T. ) ; +#2007 = EDGE_CURVE ( 'NONE', #98, #875, #1380, .T. ) ; +#2008 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, -5.711846095760983600, -14.27307068911294000 ) ) ; +#2009 = CARTESIAN_POINT ( 'NONE', ( 2.075564264075641300, 3.673109000405948300, -12.71434010089274300 ) ) ; +#2010 = VECTOR ( 'NONE', #937, 1000.000000000000000 ) ; +#2011 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2012 = ADVANCED_FACE ( 'NONE', ( #1946 ), #1672, .T. ) ; +#2013 = AXIS2_PLACEMENT_3D ( 'NONE', #1104, #1099, #1094 ) ; +#2014 = CARTESIAN_POINT ( 'NONE', ( 0.3793103448275843000, 5.157631858570338700, 15.00001676643945100 ) ) ; +#2015 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2016 = CYLINDRICAL_SURFACE ( 'NONE', #2443, 3.189999999999994200 ) ; +#2017 = AXIS2_PLACEMENT_3D ( 'NONE', #1410, #1259, #1246 ) ; +#2018 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000009300, -14.13176217742977800, -3.806263078485049100 ) ) ; +#2019 = CARTESIAN_POINT ( 'NONE', ( 0.4499999999999925200, -12.53176217742978200, -3.277205641478953000 ) ) ; +#2020 = CARTESIAN_POINT ( 'NONE', ( 6.842896810421699200, 8.434272520557389200, 7.443431564393904400 ) ) ; +#2021 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, -10.48186707534378200, -10.77203695102143400 ) ) ; +#2022 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000400, 9.121317875509609200, 13.96448286050671300 ) ) ; +#2023 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 9.099997531949975700, -4.999983233560546300 ) ) ; +#2024 = FACE_OUTER_BOUND ( 'NONE', #4186, .T. ) ; +#2025 = CARTESIAN_POINT ( 'NONE', ( -3.612630588929657700, 7.306099132151382000, -9.601463274767191100 ) ) ; +#2026 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000014700, -6.631762177429777700, 7.500016766439451900 ) ) ; +#2027 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000400, 12.49999753194997600, -14.99998323356054700 ) ) ; +#2028 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 2.499997531949971200, -7.834640608427721800 ) ) ; +#2029 = AXIS2_PLACEMENT_3D ( 'NONE', #1723, #1719, #1699 ) ; +#2030 = CARTESIAN_POINT ( 'NONE', ( 3.762420863029011900, -14.13176217742977900, -4.335260403775462700 ) ) ; +#2031 = CARTESIAN_POINT ( 'NONE', ( -0.7499999999999938900, -14.13176217742977800, -3.277205641478953400 ) ) ; +#2032 = CARTESIAN_POINT ( 'NONE', ( -2.028095992279893300, 7.983020992142285400, -9.856398000903611800 ) ) ; +#2033 = ADVANCED_FACE ( 'NONE', ( #2826 ), #528, .T. ) ; +#2034 = EDGE_CURVE ( 'NONE', #2871, #2707, #3935, .T. ) ; +#2035 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 7.499997531949976100, -14.99998323356054700 ) ) ; +#2036 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999997300, -14.13276217742978600, -9.999983233560550700 ) ) ; +#2037 = AXIS2_PLACEMENT_3D ( 'NONE', #1339, #1353, #1298 ) ; +#2038 = ORIENTED_EDGE ( 'NONE', *, *, #2462, .T. ) ; +#2039 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.243794116878613600E-016 ) ) ; +#2040 = ORIENTED_EDGE ( 'NONE', *, *, #4192, .T. ) ; +#2041 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2042 = CARTESIAN_POINT ( 'NONE', ( 1.249999999999995100, -14.13176217742977800, -3.277205641478953000 ) ) ; +#2043 = VERTEX_POINT ( 'NONE', #4204 ) ; +#2044 = ORIENTED_EDGE ( 'NONE', *, *, #336, .F. ) ; +#2045 = FACE_OUTER_BOUND ( 'NONE', #2506, .T. ) ; +#2046 = EDGE_LOOP ( 'NONE', ( #1815, #3418 ) ) ; +#2047 = CARTESIAN_POINT ( 'NONE', ( 3.805392496684278900, -14.13176217742977800, -5.393167313283203000 ) ) ; +#2048 = CARTESIAN_POINT ( 'NONE', ( 0.4499999999950319900, -12.53176217743639500, -3.794398853981884000 ) ) ; +#2049 = CARTESIAN_POINT ( 'NONE', ( -1.316398121384591400, 7.009303890404879700, -9.999983233560549000 ) ) ; +#2050 = ORIENTED_EDGE ( 'NONE', *, *, #190, .T. ) ; +#2051 = LINE ( 'NONE', #2590, #2002 ) ; +#2052 = VECTOR ( 'NONE', #1794, 1000.000000000000000 ) ; +#2053 = CARTESIAN_POINT ( 'NONE', ( 5.669872981077801000, 4.999997531949977900, -14.99998323356054700 ) ) ; +#2054 = CARTESIAN_POINT ( 'NONE', ( 6.439376289047534600, 6.446646084471107800, -12.99754498930880000 ) ) ; +#2055 = CARTESIAN_POINT ( 'NONE', ( -0.01277841427387536900, 2.857238143957335600, -15.09560685253280900 ) ) ; +#2056 = VERTEX_POINT ( 'NONE', #1913 ) ; +#2057 = CARTESIAN_POINT ( 'NONE', ( -2.485719959607112000, 8.319168943286660700, -9.183361172534164400 ) ) ; +#2058 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2059 = VECTOR ( 'NONE', #2619, 1000.000000000000000 ) ; +#2060 = ADVANCED_FACE ( 'NONE', ( #3047 ), #1489, .T. ) ; +#2061 = ORIENTED_EDGE ( 'NONE', *, *, #2734, .T. ) ; +#2062 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#2063 = CARTESIAN_POINT ( 'NONE', ( -0.02205111307827119600, 2.986688721749612100, -15.06250968983777700 ) ) ; +#2064 = DIRECTION ( 'NONE', ( -0.1438533606401639600, -0.9895990150725348900, 0.0000000000000000000 ) ) ; +#2065 = EDGE_CURVE ( 'NONE', #3978, #2712, #242, .T. ) ; +#2066 = CIRCLE ( 'NONE', #2396, 1.000000000000000900 ) ; +#2067 = CARTESIAN_POINT ( 'NONE', ( 3.835669227516165200, -14.13176217742977400, -5.922078223737054600 ) ) ; +#2068 = CARTESIAN_POINT ( 'NONE', ( -0.7499999999830784200, -14.13176217742748400, -3.776139308913087200 ) ) ; +#2069 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2070 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#2071 = EDGE_CURVE ( 'NONE', #1171, #3004, #3616, .T. ) ; +#2072 = FACE_OUTER_BOUND ( 'NONE', #496, .T. ) ; +#2073 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1047, #1075, #992, #961 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.640879929445916700, 4.712388980384689700 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9995739166973018900, 0.9995739166973018900, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#2074 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 12.49999753194997600, -4.999983233560546300 ) ) ; +#2075 = CARTESIAN_POINT ( 'NONE', ( 8.109345979613396000, 7.128758421777396500, -10.57608893798829700 ) ) ; +#2076 = CARTESIAN_POINT ( 'NONE', ( 2.218025880964529200, 2.833555502463109800, -12.84341888578552800 ) ) ; +#2077 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.019335917570373600E-017, 1.000000000000000000 ) ) ; +#2078 = EDGE_CURVE ( 'NONE', #3662, #3888, #1069, .T. ) ; +#2079 = AXIS2_PLACEMENT_3D ( 'NONE', #1524, #1369, #1364 ) ; +#2080 = CARTESIAN_POINT ( 'NONE', ( 0.01395515451630007300, 2.623600903814432300, -12.87911178116822700 ) ) ; +#2081 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, 7.499997531949976100, -14.99998323356054700 ) ) ; +#2082 = VECTOR ( 'NONE', #760, 1000.000000000000000 ) ; +#2083 = AXIS2_PLACEMENT_3D ( 'NONE', #1321, #1309, #1302 ) ; +#2084 = CARTESIAN_POINT ( 'NONE', ( 1.249999999997069000, -14.13176217742977800, -3.806382275134596100 ) ) ; +#2085 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 12.49999753194997300, 15.00001676643945100 ) ) ; +#2086 = ADVANCED_FACE ( 'NONE', ( #1847 ), #2606, .T. ) ; +#2087 = CARTESIAN_POINT ( 'NONE', ( 0.4499999999999961800, -12.53176217742978000, -1.558693207040908700E-015 ) ) ; +#2088 = CARTESIAN_POINT ( 'NONE', ( 8.500000000000001800, 7.499997531949971700, -3.383320003323666100 ) ) ; +#2089 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.243794116878613800E-016, 1.000000000000000000 ) ) ; +#2090 = CARTESIAN_POINT ( 'NONE', ( 0.4276332905599428700, -12.54483568500231500, -4.311482145875383600 ) ) ; +#2091 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2092 = ORIENTED_EDGE ( 'NONE', *, *, #4225, .F. ) ; +#2093 = FACE_OUTER_BOUND ( 'NONE', #444, .T. ) ; +#2094 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2095 = ORIENTED_EDGE ( 'NONE', *, *, #2737, .F. ) ; +#2096 = ORIENTED_EDGE ( 'NONE', *, *, #2611, .T. ) ; +#2097 = EDGE_CURVE ( 'NONE', #3158, #3370, #3432, .T. ) ; +#2098 = CARTESIAN_POINT ( 'NONE', ( -0.05577622914452930200, 3.244746686838860100, -15.00376507616815400 ) ) ; +#2099 = CARTESIAN_POINT ( 'NONE', ( -0.7202074809585732300, -14.13176217742978100, -4.260786647754951400 ) ) ; +#2100 = CIRCLE ( 'NONE', #3318, 7.499999999999998200 ) ; +#2101 = ORIENTED_EDGE ( 'NONE', *, *, #2215, .F. ) ; +#2102 = ADVANCED_FACE ( 'NONE', ( #2718 ), #2149, .F. ) ; +#2103 = ORIENTED_EDGE ( 'NONE', *, *, #1074, .F. ) ; +#2104 = CARTESIAN_POINT ( 'NONE', ( 1.237574049772715900, -14.13176217742977800, -4.335437512067332300 ) ) ; +#2105 = CARTESIAN_POINT ( 'NONE', ( 14.44000000000000100, 7.499997531949971700, -4.999983233560546300 ) ) ; +#2106 = VECTOR ( 'NONE', #2682, 1000.000000000000000 ) ; +#2107 = CIRCLE ( 'NONE', #4059, 2.250000000000000400 ) ; +#2108 = ORIENTED_EDGE ( 'NONE', *, *, #1702, .T. ) ; +#2109 = LINE ( 'NONE', #3010, #2059 ) ; +#2110 = CARTESIAN_POINT ( 'NONE', ( 3.930350669759850000, -14.13176217742977200, -7.508792316681185900 ) ) ; +#2111 = CARTESIAN_POINT ( 'NONE', ( 7.333162440679752900, 7.512646502674138900, 7.056937113420921100 ) ) ; +#2112 = VECTOR ( 'NONE', #2321, 1000.000000000000000 ) ; +#2113 = EDGE_LOOP ( 'NONE', ( #2931, #3008, #3220, #3249 ) ) ; +#2114 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2115 = CIRCLE ( 'NONE', #344, 2.250000000000000400 ) ; +#2116 = ORIENTED_EDGE ( 'NONE', *, *, #1546, .T. ) ; +#2117 = ORIENTED_EDGE ( 'NONE', *, *, #2678, .F. ) ; +#2118 = CARTESIAN_POINT ( 'NONE', ( 0.3502741646583983900, -12.59668302798257900, -5.350133393925736100 ) ) ; +#2119 = CARTESIAN_POINT ( 'NONE', ( 2.830875532259570000, 3.244746686838859700, -12.77886437928319200 ) ) ; +#2120 = CARTESIAN_POINT ( 'NONE', ( -0.6188910471175577100, -14.13176217742977800, -5.284717687013744200 ) ) ; +#2121 = DIRECTION ( 'NONE', ( 1.156482317317871500E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2122 = FACE_OUTER_BOUND ( 'NONE', #1588, .T. ) ; +#2123 = CIRCLE ( 'NONE', #2464, 2.250000000000000000 ) ; +#2124 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1032, #1133, #1013, #1008 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.4588742050141096900, 1.570796326794896800 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8995957488335693000, 0.8995957488335693000, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#2125 = CARTESIAN_POINT ( 'NONE', ( 1.194596758681919700, -14.13176217742977800, -5.393379945421051100 ) ) ; +#2126 = CARTESIAN_POINT ( 'NONE', ( 6.924708103660662100, 8.444486062753590300, 7.409497912406230600 ) ) ; +#2127 = EDGE_CURVE ( 'NONE', #1010, #3463, #3518, .T. ) ; +#2128 = ADVANCED_FACE ( 'NONE', ( #3417 ), #1738, .F. ) ; +#2129 = CARTESIAN_POINT ( 'NONE', ( -0.2408115295436441300, 4.093044906001644300, -14.73546389059014300 ) ) ; +#2130 = CARTESIAN_POINT ( 'NONE', ( 0.2957754287133466700, -12.63545391941270100, -5.871711557154276800 ) ) ; +#2131 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669296900, 0.9848077530122082400 ) ) ; +#2132 = EDGE_CURVE ( 'NONE', #1291, #2871, #37, .T. ) ; +#2133 = AXIS2_PLACEMENT_3D ( 'NONE', #1518, #1512, #1503 ) ; +#2134 = TOROIDAL_SURFACE ( 'NONE', #897, 6.000000000000000000, 1.000000000000000000 ) ; +#2135 = CARTESIAN_POINT ( 'NONE', ( 8.499999998445153100, 7.400513358171499700, -8.827327906240668700 ) ) ; +#2136 = CARTESIAN_POINT ( 'NONE', ( 2.768528700697118400, 2.627288019610056800, -12.87978940825533600 ) ) ; +#2137 = CARTESIAN_POINT ( 'NONE', ( 0.01472440150092390300, 2.473287854180400200, -12.90694379245415700 ) ) ; +#2138 = CARTESIAN_POINT ( 'NONE', ( -1.327270281075347200, 6.722941209239923700, -10.51212648991947600 ) ) ; +#2139 = AXIS2_PLACEMENT_3D ( 'NONE', #2387, #2373, #2354 ) ; +#2140 = CARTESIAN_POINT ( 'NONE', ( -0.5530677984690652900, -14.13176217742977600, -5.796611199253814700 ) ) ; +#2141 = CARTESIAN_POINT ( 'NONE', ( -1.564635008991049900, 7.640357789563243100, -9.999983233560577400 ) ) ; +#2142 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2143 = CARTESIAN_POINT ( 'NONE', ( -0.5857291385045475500, 4.887860089688551600, -14.23533335759542100 ) ) ; +#2144 = CARTESIAN_POINT ( 'NONE', ( 1.164319681758814200, -14.13176217742977400, -5.922267902273213200 ) ) ; +#2145 = DIRECTION ( 'NONE', ( 2.118233017598585100E-016, 0.9848077530122082400, 0.1736481776669296900 ) ) ; +#2146 = EDGE_CURVE ( 'NONE', #2923, #3936, #2292, .T. ) ; +#2147 = ADVANCED_FACE ( 'NONE', ( #2414 ), #874, .T. ) ; +#2148 = DIRECTION ( 'NONE', ( -1.734723475976807100E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2149 = PLANE ( 'NONE', #3821 ) ; +#2150 = EDGE_LOOP ( 'NONE', ( #1187, #1222, #1326, #1372 ) ) ; +#2151 = FACE_OUTER_BOUND ( 'NONE', #3898, .T. ) ; +#2152 = ORIENTED_EDGE ( 'NONE', *, *, #4205, .T. ) ; +#2153 = EDGE_CURVE ( 'NONE', #1683, #962, #2512, .T. ) ; +#2154 = ORIENTED_EDGE ( 'NONE', *, *, #2295, .T. ) ; +#2155 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2156 = CARTESIAN_POINT ( 'NONE', ( 0.1821630802939517000, -12.73746991014449900, -6.923907535602087800 ) ) ; +#2157 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2158 = ORIENTED_EDGE ( 'NONE', *, *, #3839, .T. ) ; +#2159 = LINE ( 'NONE', #4036, #2112 ) ; +#2160 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2161 = VERTEX_POINT ( 'NONE', #2429 ) ; +#2162 = CARTESIAN_POINT ( 'NONE', ( -0.4105758472012324100, -14.13176217742977600, -6.864287352823121900 ) ) ; +#2163 = VERTEX_POINT ( 'NONE', #4007 ) ; +#2164 = CARTESIAN_POINT ( 'NONE', ( -2.512667104876444000, 7.229300717969236300, -9.041394882664498300 ) ) ; +#2165 = LINE ( 'NONE', #2636, #2106 ) ; +#2166 = TOROIDAL_SURFACE ( 'NONE', #3292, 6.000000000000000000, 1.000000000000000000 ) ; +#2167 = EDGE_LOOP ( 'NONE', ( #3224, #1060, #1482, #278 ) ) ; +#2168 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#2169 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.337451350268914000E-032, 1.156482317317871500E-016 ) ) ; +#2170 = CIRCLE ( 'NONE', #2533, 1.000000000000000000 ) ; +#2171 = ORIENTED_EDGE ( 'NONE', *, *, #593, .T. ) ; +#2172 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996900, 7.404783783242379500, -8.805759462705077900 ) ) ; +#2173 = CARTESIAN_POINT ( 'NONE', ( 1.101201712134128900, -14.13176217742977400, -6.980019526905386400 ) ) ; +#2174 = ADVANCED_FACE ( 'NONE', ( #3313 ), #1628, .T. ) ; +#2175 = VECTOR ( 'NONE', #3090, 1000.000000000000000 ) ; +#2176 = ORIENTED_EDGE ( 'NONE', *, *, #806, .T. ) ; +#2177 = CARTESIAN_POINT ( 'NONE', ( 1.122537233841097900, 3.436355812547607200, 15.00001676643945100 ) ) ; +#2178 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 9.099997531949975700, -4.999983233560546300 ) ) ; +#2179 = SHAPE_DEFINITION_REPRESENTATION ( #440, #685 ) ; +#2180 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, 2.499997531949972500, -15.18694403236027100 ) ) ; +#2181 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999996200, 7.499997531949969900, 6.500016766439451000 ) ) ; +#2182 = CARTESIAN_POINT ( 'NONE', ( -1.175210994631166800, 6.747595387856067700, -10.47242612937174600 ) ) ; +#2183 = AXIS2_PLACEMENT_3D ( 'NONE', #1806, #1786, #1775 ) ; +#2184 = CARTESIAN_POINT ( 'NONE', ( 0.1232079500063783300, -12.80070268509891900, -7.454485443629752500 ) ) ; +#2185 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2186 = EDGE_CURVE ( 'NONE', #2712, #1542, #2314, .T. ) ; +#2187 = CYLINDRICAL_SURFACE ( 'NONE', #904, 5.000000000000000000 ) ; +#2188 = AXIS2_PLACEMENT_3D ( 'NONE', #1400, #1398, #1392 ) ; +#2189 = CARTESIAN_POINT ( 'NONE', ( 8.232050807568876700, 7.499997531949969900, 7.500016766439451900 ) ) ; +#2190 = ADVANCED_FACE ( 'NONE', ( #669 ), #3189, .T. ) ; +#2191 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 7.499997531949971700, -4.999983233560546300 ) ) ; +#2192 = CARTESIAN_POINT ( 'NONE', ( 2.802705230720521800, 3.039234205622558500, -12.80982075460082300 ) ) ; +#2193 = PLANE ( 'NONE', #3431 ) ; +#2194 = CARTESIAN_POINT ( 'NONE', ( -0.3372149214532184100, -14.13176217742929300, -7.400675086928018200 ) ) ; +#2195 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 12.49999753194997300, 12.50001676643945100 ) ) ; +#2196 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#2197 = ORIENTED_EDGE ( 'NONE', *, *, #1849, .F. ) ; +#2198 = LINE ( 'NONE', #4051, #1881 ) ; +#2199 = ORIENTED_EDGE ( 'NONE', *, *, #396, .F. ) ; +#2200 = CARTESIAN_POINT ( 'NONE', ( 1.068448859988343300, -14.13176217742977400, -7.508838993436806500 ) ) ; +#2201 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 9.099997531949975700, -8.189983233560539600 ) ) ; +#2202 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1649, #1664, #1589, #1574, #1511, #1495 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.002443154021504796500, 0.002978564791152521100, 0.003513975560800245600 ), + .UNSPECIFIED. ) ; +#2203 = ORIENTED_EDGE ( 'NONE', *, *, #3503, .F. ) ; +#2204 = EDGE_CURVE ( 'NONE', #1449, #882, #2644, .T. ) ; +#2205 = VERTEX_POINT ( 'NONE', #3401 ) ; +#2206 = FACE_OUTER_BOUND ( 'NONE', #3272, .T. ) ; +#2207 = VERTEX_POINT ( 'NONE', #3327 ) ; +#2208 = AXIS2_PLACEMENT_3D ( 'NONE', #1936, #1931, #1921 ) ; +#2209 = ORIENTED_EDGE ( 'NONE', *, *, #1307, .T. ) ; +#2210 = CIRCLE ( 'NONE', #2437, 3.189999999999994200 ) ; +#2211 = CARTESIAN_POINT ( 'NONE', ( 0.03229412385698640600, -12.94981307503505600, -8.529217632410494700 ) ) ; +#2212 = ORIENTED_EDGE ( 'NONE', *, *, #3718, .F. ) ; +#2213 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.559374635020935700E-016, -1.000000000000000000 ) ) ; +#2214 = ORIENTED_EDGE ( 'NONE', *, *, #4179, .F. ) ; +#2215 = EDGE_CURVE ( 'NONE', #3370, #3045, #2979, .T. ) ; +#2216 = CARTESIAN_POINT ( 'NONE', ( 6.164872520713970500, 6.765216965440594700, -10.47955611138322900 ) ) ; +#2217 = CIRCLE ( 'NONE', #2485, 5.900000000000014600 ) ; +#2218 = VERTEX_POINT ( 'NONE', #3339 ) ; +#2219 = CARTESIAN_POINT ( 'NONE', ( -0.1812544752395932900, -14.13176217743021300, -8.496299571669659700 ) ) ; +#2220 = DIRECTION ( 'NONE', ( 0.6156075877677250600, 0.0000000000000000000, 0.7880528522141158100 ) ) ; +#2221 = CIRCLE ( 'NONE', #2605, 5.000000000000000000 ) ; +#2222 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, 2.109289132199381200, -12.97112658808280400 ) ) ; +#2223 = ORIENTED_EDGE ( 'NONE', *, *, #3496, .T. ) ; +#2224 = CARTESIAN_POINT ( 'NONE', ( -1.479471955880462100, 6.712272837560918900, -10.55494584908579400 ) ) ; +#2225 = AXIS2_PLACEMENT_3D ( 'NONE', #2953, #2938, #2915 ) ; +#2226 = CYLINDRICAL_SURFACE ( 'NONE', #1526, 1.000000000000000900 ) ; +#2227 = CARTESIAN_POINT ( 'NONE', ( 1.017941181046855900, -14.13176217742977400, -8.567026113661301100 ) ) ; +#2228 = DIRECTION ( 'NONE', ( -1.337451350268914000E-032, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2229 = FACE_OUTER_BOUND ( 'NONE', #888, .T. ) ; +#2230 = DIRECTION ( 'NONE', ( -1.000000000000000000, 8.673617379884035500E-016, 0.0000000000000000000 ) ) ; +#2231 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996400, 7.400509754728505900, -8.827346105987867700 ) ) ; +#2232 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -13.03568385490786100, -9.073365765095996200 ) ) ; +#2233 = DIRECTION ( 'NONE', ( -0.7501486990914262300, 0.3064041732943907400, 0.5859977916675300800 ) ) ; +#2234 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2235 = CARTESIAN_POINT ( 'NONE', ( -0.04275779722576985400, 3.477953239175338500, -12.79188281120270400 ) ) ; +#2236 = EDGE_CURVE ( 'NONE', #1317, #1334, #3104, .T. ) ; +#2237 = CIRCLE ( 'NONE', #1111, 3.189999999999994200 ) ; +#2238 = ADVANCED_FACE ( 'NONE', ( #3214 ), #564, .F. ) ; +#2239 = CARTESIAN_POINT ( 'NONE', ( -0.1009013113098265300, -14.13176217742977400, -9.045603327920211700 ) ) ; +#2240 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, -6.631762177429775000, 14.75001676643945100 ) ) ; +#2241 = AXIS2_PLACEMENT_3D ( 'NONE', #1918, #1869, #1867 ) ; +#2242 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.499997531949972100, -14.99998323356054700 ) ) ; +#2243 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999997800, 7.621566414235088500, -9.999983233560549000 ) ) ; +#2244 = CARTESIAN_POINT ( 'NONE', ( 1.000000003464811100, -14.13176217742977400, -9.096394603485247600 ) ) ; +#2245 = CARTESIAN_POINT ( 'NONE', ( -2.731215175536085400, 8.054510599742885200, -10.57608893798828300 ) ) ; +#2246 = AXIS2_PLACEMENT_3D ( 'NONE', #1776, #1772, #1761 ) ; +#2247 = CARTESIAN_POINT ( 'NONE', ( 2.781964478296986800, 2.833407602079245800, -12.84344496461366200 ) ) ; +#2248 = CARTESIAN_POINT ( 'NONE', ( 1.400692749168580100, 4.887860089688712300, -12.24891146992310500 ) ) ; +#2249 = ORIENTED_EDGE ( 'NONE', *, *, #2507, .F. ) ; +#2250 = VECTOR ( 'NONE', #3129, 1000.000000000000000 ) ; +#2251 = VERTEX_POINT ( 'NONE', #2998 ) ; +#2252 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -13.13176217742977600, -9.626418191079084300 ) ) ; +#2253 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2580, #2572, #2565, #2547 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0004561997203251055700 ), + .UNSPECIFIED. ) ; +#2254 = ORIENTED_EDGE ( 'NONE', *, *, #3724, .F. ) ; +#2255 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3209, #3335, #3184 ), + ( #3165, #3148, #3133 ), + ( #3121, #3103, #3089 ), + ( #3076, #3037, #3024 ), + ( #3019, #3009, #2992 ), + ( #2984, #2968, #2957 ), + ( #2941, #2918, #2910 ), + ( #2897, #2880, #2864 ), + ( #2856, #2841, #2821 ), + ( #2808, #2793, #2777 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0007027483983864664000, 0.001405496796772932800, 0.002108245195159399000, 0.002810993593545865600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.6783928138312986800, 1.000000000000000000), + ( 1.000000000000000000, 0.6489855934041114400, 1.000000000000000000), + ( 1.000000000000000000, 0.5913719344649127600, 1.000000000000000000), + ( 1.000000000000000000, 0.5631074350518825400, 1.000000000000000000), + ( 1.000000000000000000, 0.5120873281990148100, 1.000000000000000000), + ( 1.000000000000000000, 0.4892854271163931700, 1.000000000000000000), + ( 1.000000000000000000, 0.4565426585628291100, 1.000000000000000000), + ( 1.000000000000000000, 0.4471309990222689400, 1.000000000000000000), + ( 1.000000000000000000, 0.4472135954999599800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2256 = EDGE_LOOP ( 'NONE', ( #236, #286, #378 ) ) ; +#2257 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2258 = CARTESIAN_POINT ( 'NONE', ( 2.231471299302880700, 2.627288019610057200, -12.87978940825534100 ) ) ; +#2259 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#2260 = ADVANCED_FACE ( 'NONE', ( #3980 ), #1323, .F. ) ; +#2261 = EDGE_LOOP ( 'NONE', ( #3408, #3430, #3483, #3573 ) ) ; +#2262 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2263 = VECTOR ( 'NONE', #3136, 1000.000000000000000 ) ; +#2264 = AXIS2_PLACEMENT_3D ( 'NONE', #2074, #2062, #2041 ) ; +#2265 = ORIENTED_EDGE ( 'NONE', *, *, #2678, .T. ) ; +#2266 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 4.999997531949977900, -14.99998323356054700 ) ) ; +#2267 = DIRECTION ( 'NONE', ( 8.673617379884035500E-017, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2268 = VERTEX_POINT ( 'NONE', #2947 ) ; +#2269 = LINE ( 'NONE', #3274, #2263 ) ; +#2270 = EDGE_CURVE ( 'NONE', #1750, #3455, #2989, .T. ) ; +#2271 = ORIENTED_EDGE ( 'NONE', *, *, #4153, .F. ) ; +#2272 = AXIS2_PLACEMENT_3D ( 'NONE', #1982, #1970, #2352 ) ; +#2273 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2274 = CARTESIAN_POINT ( 'NONE', ( 4.210530197769547700, 4.313120968497612400, 15.00001676643945100 ) ) ; +#2275 = LINE ( 'NONE', #3040, #2175 ) ; +#2276 = ORIENTED_EDGE ( 'NONE', *, *, #3447, .F. ) ; +#2277 = LINE ( 'NONE', #3169, #2372 ) ; +#2278 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2279 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -14.13176217742977400, -9.626418191079084300 ) ) ; +#2280 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#2281 = VERTEX_POINT ( 'NONE', #2846 ) ; +#2282 = CARTESIAN_POINT ( 'NONE', ( -0.05577622914452930200, 3.244746686838860100, -15.00376507616815400 ) ) ; +#2283 = CARTESIAN_POINT ( 'NONE', ( 1.075336839095188300, 5.262698706219159000, -12.02452808366587800 ) ) ; +#2284 = LINE ( 'NONE', #1834, #1510 ) ; +#2285 = ADVANCED_FACE ( 'NONE', ( #1533 ), #1767, .T. ) ; +#2286 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2287 = CARTESIAN_POINT ( 'NONE', ( 4.549999998267717900, 2.678208433024132300, 13.40001676412973800 ) ) ; +#2288 = EDGE_CURVE ( 'NONE', #1993, #3981, #2764, .T. ) ; +#2289 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 8.499997531949969000, 14.00001676643945100 ) ) ; +#2290 = VECTOR ( 'NONE', #899, 1000.000000000000000 ) ; +#2291 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#2292 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1054, #719, #180, #351 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 3.141592653589793100, 4.712388980384689700 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#2293 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#2294 = CARTESIAN_POINT ( 'NONE', ( -0.2143882412891693300, 4.182421432650838400, -12.62025236713784100 ) ) ; +#2295 = EDGE_CURVE ( 'NONE', #251, #145, #479, .T. ) ; +#2296 = CARTESIAN_POINT ( 'NONE', ( 4.549999999999998900, 2.499997531949969400, 13.40001676643945000 ) ) ; +#2297 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2298 = EDGE_CURVE ( 'NONE', #3686, #303, #357, .T. ) ; +#2299 = ORIENTED_EDGE ( 'NONE', *, *, #2959, .F. ) ; +#2300 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -14.13176217742977400, -9.626418191079084300 ) ) ; +#2301 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, -13.88176217742977600, 7.500016766439451000 ) ) ; +#2302 = ADVANCED_FACE ( 'NONE', ( #2206 ), #2193, .T. ) ; +#2303 = DIRECTION ( 'NONE', ( 4.336808689942017700E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2304 = EDGE_LOOP ( 'NONE', ( #3482, #1737, #3039, #965, #3728, #822, #1835, #237 ) ) ; +#2305 = LINE ( 'NONE', #3225, #3877 ) ; +#2306 = AXIS2_PLACEMENT_3D ( 'NONE', #1884, #1875, #1872 ) ; +#2307 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.146386871659069100E-032, -9.912705577010326800E-017 ) ) ; +#2308 = ORIENTED_EDGE ( 'NONE', *, *, #2511, .T. ) ; +#2309 = ORIENTED_EDGE ( 'NONE', *, *, #1402, .T. ) ; +#2310 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2311 = VERTEX_POINT ( 'NONE', #2081 ) ; +#2312 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -14.13176217742977400, -9.626418191079084300 ) ) ; +#2313 = CARTESIAN_POINT ( 'NONE', ( 4.550000000000004300, 2.713755103737782700, 13.40001676643945100 ) ) ; +#2314 = LINE ( 'NONE', #3986, #4180 ) ; +#2315 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1126, #1318, #1085, #1065, #1062, #1050 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.0005316779580253662200, 0.001063355916050732400 ), + .UNSPECIFIED. ) ; +#2316 = ORIENTED_EDGE ( 'NONE', *, *, #412, .T. ) ; +#2317 = EDGE_LOOP ( 'NONE', ( #2942, #3102, #3164, #3267 ) ) ; +#2318 = CIRCLE ( 'NONE', #2672, 1.000000000000000000 ) ; +#2319 = CIRCLE ( 'NONE', #2964, 6.000000000000000000 ) ; +#2320 = EDGE_LOOP ( 'NONE', ( #2987, #3048, #3099, #3173, #3328, #3354 ) ) ; +#2321 = DIRECTION ( 'NONE', ( -9.912705577010326800E-017, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#2322 = CARTESIAN_POINT ( 'NONE', ( 8.500000000000001800, 7.499997531949971700, -3.383320003323666100 ) ) ; +#2323 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.758420266362043500E-016, 2.168404344971013600E-016 ) ) ; +#2324 = ORIENTED_EDGE ( 'NONE', *, *, #3197, .F. ) ; +#2325 = VECTOR ( 'NONE', #3336, 1000.000000000000000 ) ; +#2326 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2327 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999992000, 2.499997531949971200, -7.834640608427721800 ) ) ; +#2328 = ORIENTED_EDGE ( 'NONE', *, *, #4192, .F. ) ; +#2329 = CARTESIAN_POINT ( 'NONE', ( 4.600460532510851400, 2.924625309102566900, 13.42508508238275400 ) ) ; +#2330 = EDGE_CURVE ( 'NONE', #2519, #3153, #191, .T. ) ; +#2331 = LINE ( 'NONE', #3399, #2325 ) ; +#2332 = ADVANCED_FACE ( 'NONE', ( #3782 ), #1121, .F. ) ; +#2333 = ORIENTED_EDGE ( 'NONE', *, *, #3552, .T. ) ; +#2334 = CARTESIAN_POINT ( 'NONE', ( 4.748197399802236000, 3.312922422655818700, 13.50358058018652600 ) ) ; +#2335 = VECTOR ( 'NONE', #504, 1000.000000000000000 ) ; +#2336 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 1.002418334253397700E-015, 12.50001676643945100 ) ) ; +#2337 = CARTESIAN_POINT ( 'NONE', ( 4.842166159476349200, 3.492533913180525300, 13.55558468928327700 ) ) ; +#2338 = CARTESIAN_POINT ( 'NONE', ( -1.175210994631167300, 7.597114959037287300, -10.99998323356055100 ) ) ; +#2339 = CARTESIAN_POINT ( 'NONE', ( 5.036931596099425900, 3.844569907613387900, 13.67083040417486700 ) ) ; +#2340 = CARTESIAN_POINT ( 'NONE', ( 5.138335461259647000, 4.016618536395969700, 13.73426314085979700 ) ) ; +#2341 = CARTESIAN_POINT ( 'NONE', ( -3.499496992532464400, 7.396112059121661800, -8.848809483873235800 ) ) ; +#2342 = PERSON_AND_ORGANIZATION ( #1256, #2848 ) ; +#2343 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2344 = ADVANCED_FACE ( 'NONE', ( #1016 ), #1983, .F. ) ; +#2345 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -14.13176217742977400, -9.626418191079084300 ) ) ; +#2346 = EDGE_CURVE ( 'NONE', #1281, #534, #2877, .T. ) ; +#2347 = AXIS2_PLACEMENT_3D ( 'NONE', #2499, #2514, #2492 ) ; +#2348 = CARTESIAN_POINT ( 'NONE', ( 5.334454794634085700, 4.362865946120382300, 13.86513352423055200 ) ) ; +#2349 = CARTESIAN_POINT ( 'NONE', ( 2.169124467740433100, 3.244746686838859700, -12.77886437928319200 ) ) ; +#2350 = VERTEX_POINT ( 'NONE', #1846 ) ; +#2351 = LINE ( 'NONE', #4065, #1475 ) ; +#2352 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2353 = ORIENTED_EDGE ( 'NONE', *, *, #3020, .F. ) ; +#2354 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2355 = CARTESIAN_POINT ( 'NONE', ( 8.109345979613396000, 7.128758421777396500, -10.57608893798829700 ) ) ; +#2356 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#2357 = EDGE_LOOP ( 'NONE', ( #876, #1311, #667, #770 ) ) ; +#2358 = AXIS2_PLACEMENT_3D ( 'NONE', #3069, #3049, #3031 ) ; +#2359 = ORIENTED_EDGE ( 'NONE', *, *, #2288, .F. ) ; +#2360 = CARTESIAN_POINT ( 'NONE', ( 1.847414442001439800, 4.717685452716588100, -12.55699539601492300 ) ) ; +#2361 = CARTESIAN_POINT ( 'NONE', ( -4.786846704165586000, 7.499997531949971700, -7.834640608427721800 ) ) ; +#2362 = ORIENTED_EDGE ( 'NONE', *, *, #1971, .T. ) ; +#2363 = CIRCLE ( 'NONE', #1162, 2.500000000000000400 ) ; +#2364 = ORIENTED_EDGE ( 'NONE', *, *, #2784, .F. ) ; +#2365 = ADVANCED_FACE ( 'NONE', ( #1992 ), #3870, .T. ) ; +#2366 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 2.499997531949971700, -12.49998323356054500 ) ) ; +#2367 = ORIENTED_EDGE ( 'NONE', *, *, #3760, .T. ) ; +#2368 = CARTESIAN_POINT ( 'NONE', ( 8.206301221361622200, 7.168360557634468200, -10.48520206562726300 ) ) ; +#2369 = DIRECTION ( 'NONE', ( 0.8660254037844370400, 0.0000000000000000000, 0.5000000000000026600 ) ) ; +#2370 = CIRCLE ( 'NONE', #2638, 2.250000000000000000 ) ; +#2371 = EDGE_CURVE ( 'NONE', #343, #1487, #2986, .T. ) ; +#2372 = VECTOR ( 'NONE', #3124, 1000.000000000000000 ) ; +#2373 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2374 = VERTEX_POINT ( 'NONE', #1541 ) ; +#2375 = CARTESIAN_POINT ( 'NONE', ( 8.294187246295695800, 7.200707413483351100, -10.38177280315895800 ) ) ; +#2376 = ORIENTED_EDGE ( 'NONE', *, *, #3659, .T. ) ; +#2377 = EDGE_CURVE ( 'NONE', #3607, #1693, #2100, .T. ) ; +#2378 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.927470528863118600E-016 ) ) ; +#2379 = CARTESIAN_POINT ( 'NONE', ( 4.549999999999998900, -6.631762177429775000, 13.40001676643945000 ) ) ; +#2380 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2381 = AXIS2_PLACEMENT_3D ( 'NONE', #2434, #2428, #2422 ) ; +#2382 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.927470528863119000E-016, -1.000000000000000000 ) ) ; +#2383 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 2.499997531949969000, 15.00001676643945100 ) ) ; +#2384 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#2385 = VECTOR ( 'NONE', #1584, 1000.000000000000000 ) ; +#2386 = AXIS2_PLACEMENT_3D ( 'NONE', #2534, #2583, #2531 ) ; +#2387 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, -5.711846095760983600, -9.273070689112938000 ) ) ; +#2388 = CARTESIAN_POINT ( 'NONE', ( 8.446280310754595200, 7.253146558468811700, -10.16000217885681800 ) ) ; +#2389 = CARTESIAN_POINT ( 'NONE', ( -1.175210994631166600, 6.747595387856068600, -10.47242612937174400 ) ) ; +#2390 = ADVANCED_FACE ( 'NONE', ( #1227 ), #1792, .F. ) ; +#2391 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #468, #3968, #3958 ), + ( #3943, #3930, #3908 ), + ( #3869, #3861, #3819 ), + ( #3809, #3790, #3773 ), + ( #3762, #3712, #3700 ), + ( #3681, #3661, #3638 ), + ( #3604, #3595, #3583 ), + ( #3519, #3504, #3493 ), + ( #3480, #3452, #3395 ), + ( #3364, #3348, #3337 ), + ( #3325, #3306, #3294 ), + ( #3248, #3222, #3195 ), + ( #3182, #3161, #3117 ), + ( #3101, #3057, #3022 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 1.570796326794896800, 1.963495408493620700, 2.356194490192344800, 2.552544031041707100, 2.748893571891069000, 2.945243112740430800, 3.141592653589793100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000), + ( 1.000000000000000000, 1.000158583040932500, 1.000000000000000000), + ( 1.000000000000000000, 0.9867291862307237000, 1.000000000000000000), + ( 1.000000000000000000, 0.9386556535315895300, 1.000000000000000000), + ( 1.000000000000000000, 0.9038128836971227600, 1.000000000000000000), + ( 1.000000000000000000, 0.8471316638280973500, 1.000000000000000000), + ( 1.000000000000000000, 0.8275942648708872800, 1.000000000000000000), + ( 1.000000000000000000, 0.7902180133724539000, 1.000000000000000000), + ( 1.000000000000000000, 0.7723968163673188300, 1.000000000000000000), + ( 1.000000000000000000, 0.7418334233298870000, 1.000000000000000000), + ( 1.000000000000000000, 0.7291288899781674900, 1.000000000000000000), + ( 1.000000000000000000, 0.7117460065651489700, 1.000000000000000000), + ( 1.000000000000000000, 0.7070717253461067400, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2392 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, -13.88176217742977400, -3.277205641478955200 ) ) ; +#2393 = LINE ( 'NONE', #909, #2290 ) ; +#2394 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2395 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999996200, 8.416077315049584200, 8.500016766439451000 ) ) ; +#2396 = AXIS2_PLACEMENT_3D ( 'NONE', #2439, #2427, #2420 ) ; +#2397 = EDGE_LOOP ( 'NONE', ( #155, #208, #322, #542 ) ) ; +#2398 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2399 = VERTEX_POINT ( 'NONE', #1349 ) ; +#2400 = EDGE_CURVE ( 'NONE', #4220, #2056, #3094, .T. ) ; +#2401 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 7.499997531949971700, -7.934876758034636900 ) ) ; +#2402 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2403 = AXIS2_PLACEMENT_3D ( 'NONE', #2488, #2482, #2474 ) ; +#2404 = CARTESIAN_POINT ( 'NONE', ( -14.30515419966116000, 8.226596812075865000, 14.27341748631317000 ) ) ; +#2405 = ORIENTED_EDGE ( 'NONE', *, *, #2737, .T. ) ; +#2406 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2407 = FACE_OUTER_BOUND ( 'NONE', #2663, .T. ) ; +#2408 = ADVANCED_FACE ( 'NONE', ( #3885 ), #2166, .T. ) ; +#2409 = ORIENTED_EDGE ( 'NONE', *, *, #3794, .T. ) ; +#2410 = CARTESIAN_POINT ( 'NONE', ( -14.02497447201967000, 8.012228462850551100, 13.69267820789907800 ) ) ; +#2411 = VERTEX_POINT ( 'NONE', #1145 ) ; +#2412 = AXIS2_PLACEMENT_3D ( 'NONE', #2647, #2716, #2622 ) ; +#2413 = ORIENTED_EDGE ( 'NONE', *, *, #3817, .T. ) ; +#2414 = FACE_OUTER_BOUND ( 'NONE', #3508, .T. ) ; +#2415 = ORIENTED_EDGE ( 'NONE', *, *, #3786, .T. ) ; +#2416 = CARTESIAN_POINT ( 'NONE', ( -14.15206688216540500, 8.869917317689601800, 14.38348379020678000 ) ) ; +#2417 = CARTESIAN_POINT ( 'NONE', ( 8.500000000000001800, 7.499997531949971700, -6.616646463797426500 ) ) ; +#2418 = EDGE_LOOP ( 'NONE', ( #3273, #3302, #3317, #3377 ) ) ; +#2419 = VECTOR ( 'NONE', #3637, 1000.000000000000000 ) ; +#2420 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2421 = ORIENTED_EDGE ( 'NONE', *, *, #887, .F. ) ; +#2422 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2423 = ORIENTED_EDGE ( 'NONE', *, *, #1297, .F. ) ; +#2424 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.734723475976807600E-016 ) ) ; +#2425 = VECTOR ( 'NONE', #3381, 1000.000000000000000 ) ; +#2426 = ORIENTED_EDGE ( 'NONE', *, *, #2876, .F. ) ; +#2427 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2428 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2429 = CARTESIAN_POINT ( 'NONE', ( 0.4500000000000005100, -6.631762177429775000, 13.40001676643945100 ) ) ; +#2430 = EDGE_CURVE ( 'NONE', #1449, #1952, #2315, .T. ) ; +#2431 = LINE ( 'NONE', #3629, #2419 ) ; +#2432 = ORIENTED_EDGE ( 'NONE', *, *, #108, .T. ) ; +#2433 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, -14.13176217742977400, -8.566309640785950900 ) ) ; +#2434 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, -5.711846095760983600, -9.273070689112938000 ) ) ; +#2435 = CARTESIAN_POINT ( 'NONE', ( 8.500000000000001800, 7.499997531949971700, -7.834640608427721800 ) ) ; +#2436 = ADVANCED_FACE ( 'NONE', ( #4221 ), #3891, .T. ) ; +#2437 = AXIS2_PLACEMENT_3D ( 'NONE', #2660, #2653, #2641 ) ; +#2438 = CIRCLE ( 'NONE', #1744, 5.000000000000000000 ) ; +#2439 = CARTESIAN_POINT ( 'NONE', ( 8.500000000000003600, 8.499997531949970800, 6.500016766439446600 ) ) ; +#2440 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, 9.999997531949972500, -14.99998323356054700 ) ) ; +#2441 = DIRECTION ( 'NONE', ( -1.734723475976807600E-016, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#2442 = EDGE_CURVE ( 'NONE', #2281, #1334, #3568, .T. ) ; +#2443 = AXIS2_PLACEMENT_3D ( 'NONE', #2687, #3156, #2731 ) ; +#2444 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -4.223092916832912100, -7.643662237486944700 ) ) ; +#2445 = CARTESIAN_POINT ( 'NONE', ( 8.511285401964517700, 7.273562991646715900, -10.04112524475687900 ) ) ; +#2446 = AXIS2_PLACEMENT_3D ( 'NONE', #3201, #3175, #3140 ) ; +#2447 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #3245, #3329, #3238, #3233 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.570796326794896800, 1.642305377733670000 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9995739166973018900, 0.9995739166973018900, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#2448 = CARTESIAN_POINT ( 'NONE', ( 8.565461751399956500, 7.289788760521789300, -9.914721068897783600 ) ) ; +#2449 = CARTESIAN_POINT ( 'NONE', ( 8.037058327898789000, 7.495153258040185000, 7.742836632102577000 ) ) ; +#2450 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 2.627288019610056800, -12.87978940825533600 ) ) ; +#2451 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999997300, -14.13276217742978600, -9.999983233560550700 ) ) ; +#2452 = ADVANCED_FACE ( 'NONE', ( #376 ), #996, .T. ) ; +#2453 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, -11.63176217742977600, 7.500016766439451000 ) ) ; +#2454 = CARTESIAN_POINT ( 'NONE', ( 5.517241379310345200, 4.714692804133610700, 14.00001676643945100 ) ) ; +#2455 = ORIENTED_EDGE ( 'NONE', *, *, #472, .F. ) ; +#2456 = EDGE_CURVE ( 'NONE', #3370, #4220, #3740, .T. ) ; +#2457 = CYLINDRICAL_SURFACE ( 'NONE', #5, 1.000000000000000000 ) ; +#2458 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 7.499997531949971700, -3.799983233560540800 ) ) ; +#2459 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999997800, 12.49999753194997600, -9.999983233560549000 ) ) ; +#2460 = CARTESIAN_POINT ( 'NONE', ( 6.588167674532610500, 8.416077316347642800, 7.500016766439445700 ) ) ; +#2461 = ORIENTED_EDGE ( 'NONE', *, *, #2132, .F. ) ; +#2462 = EDGE_CURVE ( 'NONE', #736, #303, #4033, .T. ) ; +#2463 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -14.13176217742977400, -9.626418191079084300 ) ) ; +#2464 = AXIS2_PLACEMENT_3D ( 'NONE', #2301, #2297, #2286 ) ; +#2465 = EDGE_LOOP ( 'NONE', ( #3216, #1929, #393, #872 ) ) ; +#2466 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -14.13176217742977400, -9.626418191079084300 ) ) ; +#2467 = ORIENTED_EDGE ( 'NONE', *, *, #1915, .T. ) ; +#2468 = EDGE_LOOP ( 'NONE', ( #2780, #2827, #2839, #2892 ) ) ; +#2469 = CARTESIAN_POINT ( 'NONE', ( 5.429412236460333200, 4.536918077197707800, 13.93263769311049800 ) ) ; +#2470 = CIRCLE ( 'NONE', #2847, 2.249999999999999100 ) ; +#2471 = VERTEX_POINT ( 'NONE', #980 ) ; +#2472 = ORIENTED_EDGE ( 'NONE', *, *, #1105, .T. ) ; +#2473 = VECTOR ( 'NONE', #3668, 1000.000000000000000 ) ; +#2474 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.335737076502141100E-014, -1.000000000000000000 ) ) ; +#2475 = CARTESIAN_POINT ( 'NONE', ( -1.733409466458142100, 7.741695438436927600, -9.973969377944078100 ) ) ; +#2476 = ADVANCED_FACE ( 'NONE', ( #3524 ), #1543, .T. ) ; +#2477 = ORIENTED_EDGE ( 'NONE', *, *, #1856, .T. ) ; +#2478 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -13.13176217742977600, -9.626418191079084300 ) ) ; +#2479 = LINE ( 'NONE', #3703, #2473 ) ; +#2480 = ORIENTED_EDGE ( 'NONE', *, *, #896, .F. ) ; +#2481 = ORIENTED_EDGE ( 'NONE', *, *, #2876, .T. ) ; +#2482 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2483 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999996200, 7.430064017866316200, 8.333350099772783200 ) ) ; +#2484 = ORIENTED_EDGE ( 'NONE', *, *, #956, .F. ) ; +#2485 = AXIS2_PLACEMENT_3D ( 'NONE', #2899, #2893, #2883 ) ; +#2486 = FACE_OUTER_BOUND ( 'NONE', #4216, .T. ) ; +#2487 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 12.49999753194997600, -6.199983233560551800 ) ) ; +#2488 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, -5.711846095760983600, -9.273070689112938000 ) ) ; +#2489 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 13.36823782257022600, -3.277205641478951700 ) ) ; +#2490 = EDGE_CURVE ( 'NONE', #656, #2411, #792, .T. ) ; +#2491 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2492 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2493 = CARTESIAN_POINT ( 'NONE', ( -1.667652090158643100, 7.430064017866317100, 8.333350099772786700 ) ) ; +#2494 = ADVANCED_FACE ( 'NONE', ( #3264 ), #3862, .T. ) ; +#2495 = AXIS2_PLACEMENT_3D ( 'NONE', #2560, #2549, #2543 ) ; +#2496 = FACE_OUTER_BOUND ( 'NONE', #566, .T. ) ; +#2497 = CARTESIAN_POINT ( 'NONE', ( 0.6596280334927611100, 5.961770002530275100, -11.73783235566410900 ) ) ; +#2498 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2499 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 13.36823782257022600, -3.277205641478951700 ) ) ; +#2500 = CARTESIAN_POINT ( 'NONE', ( -1.833735445420928300, 7.433106095819916000, 8.315902082081063200 ) ) ; +#2501 = EDGE_CURVE ( 'NONE', #3068, #1116, #3056, .T. ) ; +#2502 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -14.13176217742977400, -8.566362291741874900 ) ) ; +#2503 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 12.49999753194997300, 15.00001676643945100 ) ) ; +#2504 = ORIENTED_EDGE ( 'NONE', *, *, #1680, .F. ) ; +#2505 = FACE_OUTER_BOUND ( 'NONE', #3562, .T. ) ; +#2506 = EDGE_LOOP ( 'NONE', ( #1397, #1429, #1479, #1507 ) ) ; +#2507 = EDGE_CURVE ( 'NONE', #1281, #2161, #3840, .T. ) ; +#2508 = ORIENTED_EDGE ( 'NONE', *, *, #4028, .T. ) ; +#2509 = CARTESIAN_POINT ( 'NONE', ( 8.500000000000001800, 7.499997531949971700, -6.616646463797426500 ) ) ; +#2510 = ORIENTED_EDGE ( 'NONE', *, *, #2734, .F. ) ; +#2511 = EDGE_CURVE ( 'NONE', #604, #1233, #60, .T. ) ; +#2512 = CIRCLE ( 'NONE', #3797, 7.249999999999999100 ) ; +#2513 = ORIENTED_EDGE ( 'NONE', *, *, #3061, .T. ) ; +#2514 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2515 = ORIENTED_EDGE ( 'NONE', *, *, #2204, .T. ) ; +#2516 = CARTESIAN_POINT ( 'NONE', ( -2.158332199701715700, 7.444061354214190000, 8.246650460150576100 ) ) ; +#2517 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #797, #3831, #3592, #117, #84, #1012, #57, #23, #4218, #4211 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 8.824766327896537800E-019, 0.0006289887510463474300, 0.001257977502092694000, 0.001886966253139040400, 0.002515955004185387100 ), + .UNSPECIFIED. ) ; +#2518 = LINE ( 'NONE', #3594, #2425 ) ; +#2519 = VERTEX_POINT ( 'NONE', #3556 ) ; +#2520 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 7.499997531949969900, 7.500016766439451900 ) ) ; +#2521 = ORIENTED_EDGE ( 'NONE', *, *, #466, .F. ) ; +#2522 = VECTOR ( 'NONE', #3761, 1000.000000000000000 ) ; +#2523 = AXIS2_PLACEMENT_3D ( 'NONE', #3255, #3191, #3241 ) ; +#2524 = ORIENTED_EDGE ( 'NONE', *, *, #3643, .F. ) ; +#2525 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#2526 = LINE ( 'NONE', #3766, #2522 ) ; +#2527 = ORIENTED_EDGE ( 'NONE', *, *, #1437, .T. ) ; +#2528 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000002700, 8.380616522111505900, -9.012924301960794100 ) ) ; +#2529 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996900, 7.404783783242380400, -8.805759462705079700 ) ) ; +#2530 = LOCAL_TIME ( 17, 44, 58.00000000000000000, #3438 ) ; +#2531 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2532 = CARTESIAN_POINT ( 'NONE', ( -2.318796696493177200, 7.452094495163671600, 8.194018942182511400 ) ) ; +#2533 = AXIS2_PLACEMENT_3D ( 'NONE', #2933, #2920, #2914 ) ; +#2534 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 7.499997531949971700, -4.999983233560546300 ) ) ; +#2535 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2536 = EDGE_CURVE ( 'NONE', #2707, #4099, #2935, .T. ) ; +#2537 = AXIS2_PLACEMENT_3D ( 'NONE', #3095, #3091, #3088 ) ; +#2538 = CARTESIAN_POINT ( 'NONE', ( 7.502510295053188100, 7.402981233922385100, -8.814863520771915300 ) ) ; +#2539 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 2.499997531949970300, 2.891202939038461200E-016 ) ) ; +#2540 = CARTESIAN_POINT ( 'NONE', ( -2.619746996244237900, 7.469587222217931800, 8.055067812190079800 ) ) ; +#2541 = DIRECTION ( 'NONE', ( 1.337451350268914000E-032, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2542 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999997300, 7.404783783242379500, -8.805759462705079700 ) ) ; +#2543 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2544 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2545 = ORIENTED_EDGE ( 'NONE', *, *, #3235, .F. ) ; +#2546 = LINE ( 'NONE', #2458, #2250 ) ; +#2547 = CARTESIAN_POINT ( 'NONE', ( -2.389277050839124300, 8.247747006235787400, -9.457352151231297900 ) ) ; +#2548 = VERTEX_POINT ( 'NONE', #3454 ) ; +#2549 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2550 = ADVANCED_FACE ( 'NONE', ( #2779 ), #2562, .T. ) ; +#2551 = CARTESIAN_POINT ( 'NONE', ( -2.763311506821140500, 7.479203386421150200, 7.967472106015391000 ) ) ; +#2552 = EDGE_LOOP ( 'NONE', ( #381, #491, #581, #632 ) ) ; +#2553 = EDGE_CURVE ( 'NONE', #1863, #624, #2930, .T. ) ; +#2554 = CARTESIAN_POINT ( 'NONE', ( 1.069642725131479100, -14.13176217742977600, -7.508895339200314800 ) ) ; +#2555 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999997300, 8.385741033500862000, -8.999983233560550700 ) ) ; +#2556 = EDGE_LOOP ( 'NONE', ( #247, #4191, #2309, #1285, #1337, #2983, #3941, #2223, #790, #3000, #4222, #2467 ) ) ; +#2557 = VERTEX_POINT ( 'NONE', #3387 ) ; +#2558 = EDGE_LOOP ( 'NONE', ( #2563, #2650, #2676, #2733 ) ) ; +#2559 = VECTOR ( 'NONE', #3798, 1000.000000000000000 ) ; +#2560 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 9.099997531949975700, -4.999983233560546300 ) ) ; +#2561 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#2562 = CYLINDRICAL_SURFACE ( 'NONE', #2937, 2.500000000000000400 ) ; +#2563 = ORIENTED_EDGE ( 'NONE', *, *, #3447, .T. ) ; +#2564 = ORIENTED_EDGE ( 'NONE', *, *, #3813, .T. ) ; +#2565 = CARTESIAN_POINT ( 'NONE', ( -2.455660924270953100, 8.287510829326869600, -9.328279857710835900 ) ) ; +#2566 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #166, #214, #219, #157, #152, #147, #140, #133 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001599298589308793300, 0.003198597178617586500, 0.006397194357235175600 ), + .UNSPECIFIED. ) ; +#2567 = VECTOR ( 'NONE', #3650, 1000.000000000000000 ) ; +#2568 = EDGE_LOOP ( 'NONE', ( #1840, #2040, #2209, #2299, #2423 ) ) ; +#2569 = CARTESIAN_POINT ( 'NONE', ( 6.175210994631164000, 6.747595387856067700, -10.47242612937174600 ) ) ; +#2570 = CARTESIAN_POINT ( 'NONE', ( -3.022118558908745400, 7.494428514310783400, 7.758211650456469300 ) ) ; +#2571 = VECTOR ( 'NONE', #3858, 1000.000000000000000 ) ; +#2572 = CARTESIAN_POINT ( 'NONE', ( -2.493836215418816900, 8.310595322116430600, -9.178723109458124100 ) ) ; +#2573 = CARTESIAN_POINT ( 'NONE', ( -3.499999998570846300, 7.400515010063003300, -8.827319563106669900 ) ) ; +#2574 = VERTEX_POINT ( 'NONE', #3598 ) ; +#2575 = AXIS2_PLACEMENT_3D ( 'NONE', #3403, #3355, #3333 ) ; +#2576 = LINE ( 'NONE', #3913, #2571 ) ; +#2577 = ADVANCED_FACE ( 'NONE', ( #2612 ), #3547, .T. ) ; +#2578 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2753, #3086, #2988, #2735, #2713, #2554, #2502, #2463 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.03020507878858919700, 0.03184237428937689000, 0.03347966979016458300, 0.03675426079173996900 ), + .UNSPECIFIED. ) ; +#2579 = FACE_OUTER_BOUND ( 'NONE', #2418, .T. ) ; +#2580 = CARTESIAN_POINT ( 'NONE', ( -2.499253340664267900, 8.369912996714960600, -9.038619501125101200 ) ) ; +#2581 = EDGE_CURVE ( 'NONE', #2374, #343, #2319, .T. ) ; +#2582 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#2583 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2584 = DIRECTION ( 'NONE', ( 1.156482317317871500E-016, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#2585 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -5.711846095760983600, -16.52307068911293800 ) ) ; +#2586 = CARTESIAN_POINT ( 'NONE', ( -2.502509325486924000, 7.402981930152362700, -8.814860004324442500 ) ) ; +#2587 = EDGE_CURVE ( 'NONE', #1576, #635, #2159, .T. ) ; +#2588 = FACE_OUTER_BOUND ( 'NONE', #2552, .T. ) ; +#2589 = CARTESIAN_POINT ( 'NONE', ( 5.081156898870283100, 3.917771398724451300, 13.69781421967590900 ) ) ; +#2590 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000700, 7.499997531949976100, 12.50001676643944900 ) ) ; +#2591 = CARTESIAN_POINT ( 'NONE', ( 4.340371966507241600, 5.961770002530277800, -11.73783235566410500 ) ) ; +#2592 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, 7.499997531949976100, -14.99998323356054700 ) ) ; +#2593 = DIRECTION ( 'NONE', ( -4.956352788505163400E-017, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2594 = ADVANCED_FACE ( 'NONE', ( #2045 ), #2750, .T. ) ; +#2595 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2596 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999997300, 8.380618504483864600, -9.012919295933196300 ) ) ; +#2597 = ORIENTED_EDGE ( 'NONE', *, *, #673, .T. ) ; +#2598 = LINE ( 'NONE', #731, #4077 ) ; +#2599 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2600 = CARTESIAN_POINT ( 'NONE', ( 5.750000000000002700, 2.499997531949972500, 15.00001676643945300 ) ) ; +#2601 = ORIENTED_EDGE ( 'NONE', *, *, #327, .F. ) ; +#2602 = ORIENTED_EDGE ( 'NONE', *, *, #2034, .F. ) ; +#2603 = ORIENTED_EDGE ( 'NONE', *, *, #1194, .T. ) ; +#2604 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2605 = AXIS2_PLACEMENT_3D ( 'NONE', #3034, #3021, #3014 ) ; +#2606 = CYLINDRICAL_SURFACE ( 'NONE', #3828, 0.9999999999999991100 ) ; +#2607 = VERTEX_POINT ( 'NONE', #1800 ) ; +#2608 = CARTESIAN_POINT ( 'NONE', ( -3.499498200833550700, 7.396117566676187100, -8.848783467065759500 ) ) ; +#2609 = VERTEX_POINT ( 'NONE', #2088 ) ; +#2610 = LINE ( 'NONE', #3689, #2567 ) ; +#2611 = EDGE_CURVE ( 'NONE', #303, #3514, #2666, .T. ) ; +#2612 = FACE_OUTER_BOUND ( 'NONE', #3658, .T. ) ; +#2613 = ORIENTED_EDGE ( 'NONE', *, *, #4115, .F. ) ; +#2614 = ADVANCED_FACE ( 'NONE', ( #1685 ), #1985, .T. ) ; +#2615 = ORIENTED_EDGE ( 'NONE', *, *, #1213, .T. ) ; +#2616 = CARTESIAN_POINT ( 'NONE', ( 4.550000000000006900, -12.53176217742978200, -3.277205641478955200 ) ) ; +#2617 = LINE ( 'NONE', #3836, #2559 ) ; +#2618 = ORIENTED_EDGE ( 'NONE', *, *, #3235, .T. ) ; +#2619 = DIRECTION ( 'NONE', ( -1.368455531567204200E-048, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#2620 = VECTOR ( 'NONE', #583, 1000.000000000000000 ) ; +#2621 = CARTESIAN_POINT ( 'NONE', ( -3.498506681328513900, 7.391593752587464600, -8.870153241979331000 ) ) ; +#2622 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2623 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#2624 = EDGE_LOOP ( 'NONE', ( #4132, #4187, #473, #559 ) ) ; +#2625 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.36823782257022600, -3.277205641478951700 ) ) ; +#2626 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#2627 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, -11.63176217742977600, 7.500016766439451000 ) ) ; +#2628 = CARTESIAN_POINT ( 'NONE', ( -2.504908162647514900, 7.401177563664948200, -8.824088729970981100 ) ) ; +#2629 = CYLINDRICAL_SURFACE ( 'NONE', #1522, 1.000000000000000900 ) ; +#2630 = EDGE_CURVE ( 'NONE', #882, #1952, #1228, .T. ) ; +#2631 = CIRCLE ( 'NONE', #969, 2.250000000000000400 ) ; +#2632 = CARTESIAN_POINT ( 'NONE', ( 5.749999999982792400, -14.13176217742977800, -3.776139308912999300 ) ) ; +#2633 = CARTESIAN_POINT ( 'NONE', ( 2.249999999999999600, 2.109289132199378100, -12.97112658808280400 ) ) ; +#2634 = ADVANCED_FACE ( 'NONE', ( #1182 ), #918, .F. ) ; +#2635 = CARTESIAN_POINT ( 'NONE', ( -3.136233920810533400, 7.499997531949969900, 7.638316529846550300 ) ) ; +#2636 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 7.499997531949976100, 12.50001676643944900 ) ) ; +#2637 = CARTESIAN_POINT ( 'NONE', ( -2.499749099859455400, 8.375341574251510900, -9.025797635475095500 ) ) ; +#2638 = AXIS2_PLACEMENT_3D ( 'NONE', #3228, #3211, #3198 ) ; +#2639 = CARTESIAN_POINT ( 'NONE', ( -4.336808689942017700E-016, 2.109289132199379000, -12.97112658808280500 ) ) ; +#2640 = LOCAL_TIME ( 17, 44, 58.00000000000000000, #3243 ) ; +#2641 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2642 = CARTESIAN_POINT ( 'NONE', ( -4.336808689942017700E-016, 2.499997531949970300, -15.18694403236027300 ) ) ; +#2643 = EDGE_CURVE ( 'NONE', #4099, #3584, #1798, .T. ) ; +#2644 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #3388, #3398, #3385, #3372 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.362183985246443700, 1.570796326794896800 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9963766944304112100, 0.9963766944304112100, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#2645 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #1885 ) ) ; +#2646 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2647 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999500, 7.499997531949976100, 12.50001676643944900 ) ) ; +#2648 = CARTESIAN_POINT ( 'NONE', ( 8.355325991800725700, 7.499997531949969900, -6.370550978289472300 ) ) ; +#2649 = CARTESIAN_POINT ( 'NONE', ( -3.232050807568874100, 7.499997531949969900, 7.500016766439451900 ) ) ; +#2650 = ORIENTED_EDGE ( 'NONE', *, *, #1096, .F. ) ; +#2651 = CIRCLE ( 'NONE', #61, 2.250000000000000400 ) ; +#2652 = AXIS2_PLACEMENT_3D ( 'NONE', #3474, #3457, #3448 ) ; +#2653 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2654 = CARTESIAN_POINT ( 'NONE', ( -3.498506681328327000, 7.391593752586588900, -8.870153241983482300 ) ) ; +#2655 = EDGE_LOOP ( 'NONE', ( #2409, #2413, #2515, #2601, #2990 ) ) ; +#2656 = ORIENTED_EDGE ( 'NONE', *, *, #1181, .T. ) ; +#2657 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#2658 = CARTESIAN_POINT ( 'NONE', ( 2.249999999999847200, 2.282102806106352000, -12.94065487473765000 ) ) ; +#2659 = ADVANCED_FACE ( 'NONE', ( #925 ), #828, .T. ) ; +#2660 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 9.099997531949975700, -4.999983233560546300 ) ) ; +#2661 = CARTESIAN_POINT ( 'NONE', ( 0.4500000000000014000, 1.074592357511531100E-015, 13.40001676643945000 ) ) ; +#2662 = CARTESIAN_POINT ( 'NONE', ( 0.009293824534173437300, 2.229838546762619200, -12.94987047378622700 ) ) ; +#2663 = EDGE_LOOP ( 'NONE', ( #3460, #3471, #3841, #3886 ) ) ; +#2664 = VERTEX_POINT ( 'NONE', #474 ) ; +#2665 = CIRCLE ( 'NONE', #2872, 7.499999999999998200 ) ; +#2666 = LINE ( 'NONE', #1119, #2052 ) ; +#2667 = ORIENTED_EDGE ( 'NONE', *, *, #2643, .T. ) ; +#2668 = CARTESIAN_POINT ( 'NONE', ( -2.366025403784434800, 8.499997531949969000, 7.000016766439451000 ) ) ; +#2669 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -8.019335917570373600E-017 ) ) ; +#2670 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2671 = CARTESIAN_POINT ( 'NONE', ( 3.749999999999999600, 0.0000000000000000000, 15.00001676643945100 ) ) ; +#2672 = AXIS2_PLACEMENT_3D ( 'NONE', #3258, #3247, #3244 ) ; +#2673 = ORIENTED_EDGE ( 'NONE', *, *, #616, .F. ) ; +#2674 = CIRCLE ( 'NONE', #2900, 2.500000000000000400 ) ; +#2675 = CARTESIAN_POINT ( 'NONE', ( 0.2958052145624082100, 5.942166846758357000, -11.48692006674652400 ) ) ; +#2676 = ORIENTED_EDGE ( 'NONE', *, *, #54, .F. ) ; +#2677 = CARTESIAN_POINT ( 'NONE', ( -3.905501119207623000E-016, 2.619179373453270900, -15.15647231967235200 ) ) ; +#2678 = EDGE_CURVE ( 'NONE', #1291, #3514, #623, .T. ) ; +#2679 = CIRCLE ( 'NONE', #942, 6.000000000000000000 ) ; +#2680 = EDGE_LOOP ( 'NONE', ( #1545, #1595, #1634, #4042, #1842 ) ) ; +#2681 = AXIS2_PLACEMENT_3D ( 'NONE', #2709, #2705, #2696 ) ; +#2682 = DIRECTION ( 'NONE', ( -1.337451350268914000E-032, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2683 = CARTESIAN_POINT ( 'NONE', ( 2.243818511742493400, 2.454916003848704800, -12.91018324535316900 ) ) ; +#2684 = ORIENTED_EDGE ( 'NONE', *, *, #2812, .T. ) ; +#2685 = AXIS2_PLACEMENT_3D ( 'NONE', #749, #1779, #394 ) ; +#2686 = CARTESIAN_POINT ( 'NONE', ( -2.321757013805798600, 8.499997531949970800, 7.076691867051720500 ) ) ; +#2687 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 7.499997531949971700, -4.999983233560546300 ) ) ; +#2688 = ADVANCED_FACE ( 'NONE', ( #430 ), #490, .T. ) ; +#2689 = FACE_OUTER_BOUND ( 'NONE', #979, .T. ) ; +#2690 = CARTESIAN_POINT ( 'NONE', ( -2.507185563758651500, 7.399359797678706700, -8.833467685872543400 ) ) ; +#2691 = CARTESIAN_POINT ( 'NONE', ( -3.590309138504743600, 7.331264535342753200, -9.250700633280741800 ) ) ; +#2692 = CARTESIAN_POINT ( 'NONE', ( 0.01424587783755267700, 2.351284769346316100, -12.92845622803984700 ) ) ; +#2693 = CARTESIAN_POINT ( 'NONE', ( -0.004263095595004407500, 2.738360895130635100, -15.12600068875559600 ) ) ; +#2694 = FACE_OUTER_BOUND ( 'NONE', #2838, .T. ) ; +#2695 = CARTESIAN_POINT ( 'NONE', ( -2.268666912635168400, 8.494203536090342500, 7.145571624526059700 ) ) ; +#2696 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2697 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1674, #1155, #1061, #1049, #1037, #1035 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.0004103080797867253700, 0.0008206161595734507300 ), + .UNSPECIFIED. ) ; +#2698 = EDGE_CURVE ( 'NONE', #3455, #560, #3999, .T. ) ; +#2699 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, -4.843605207426335800, -14.19710945417398000 ) ) ; +#2700 = CARTESIAN_POINT ( 'NONE', ( 4.550000000000001600, -12.53176217742977800, -3.277205641478954800 ) ) ; +#2701 = AXIS2_PLACEMENT_3D ( 'NONE', #172, #124, #81 ) ; +#2702 = CARTESIAN_POINT ( 'NONE', ( 2.231471299302880700, 2.627288019610057200, -12.87978940825533800 ) ) ; +#2703 = ADVANCED_FACE ( 'NONE', ( #571 ), #3237, .T. ) ; +#2704 = CARTESIAN_POINT ( 'NONE', ( 2.231471299302881600, 2.627288019610056800, -12.87978940825533600 ) ) ; +#2705 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2706 = CARTESIAN_POINT ( 'NONE', ( -0.01277841427387536900, 2.857238143957335600, -15.09560685253280500 ) ) ; +#2707 = VERTEX_POINT ( 'NONE', #3449 ) ; +#2708 = VERTEX_POINT ( 'NONE', #3284 ) ; +#2709 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, 13.36823782257022600, -3.277205641478951700 ) ) ; +#2710 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122082400, 0.1736481776669295300 ) ) ; +#2711 = ORIENTED_EDGE ( 'NONE', *, *, #4056, .T. ) ; +#2712 = VERTEX_POINT ( 'NONE', #3260 ) ; +#2713 = CARTESIAN_POINT ( 'NONE', ( 1.164319682853967700, -14.13176217742977400, -5.922267902283784300 ) ) ; +#2714 = CARTESIAN_POINT ( 'NONE', ( 6.631869188944572000, 6.714409161062627100, -10.60038814472224500 ) ) ; +#2715 = ORIENTED_EDGE ( 'NONE', *, *, #941, .F. ) ; +#2716 = DIRECTION ( 'NONE', ( -1.337451350268914000E-032, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2717 = PLANE ( 'NONE', #1244 ) ; +#2718 = FACE_OUTER_BOUND ( 'NONE', #1796, .T. ) ; +#2719 = ORIENTED_EDGE ( 'NONE', *, *, #544, .F. ) ; +#2720 = CARTESIAN_POINT ( 'NONE', ( 2.169124467740433100, 3.244746686838859700, -12.77886437928319200 ) ) ; +#2721 = ORIENTED_EDGE ( 'NONE', *, *, #3139, .T. ) ; +#2722 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, 2.499997531949969900, 12.50001676643945100 ) ) ; +#2723 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, 7.499997531949976100, -14.99998323356054700 ) ) ; +#2724 = LINE ( 'NONE', #352, #2620 ) ; +#2725 = EDGE_CURVE ( 'NONE', #1116, #1854, #2447, .T. ) ; +#2726 = EDGE_LOOP ( 'NONE', ( #3897, #1697, #1183, #611, #1850, #2869, #661, #3834, #1799, #713 ) ) ; +#2727 = ORIENTED_EDGE ( 'NONE', *, *, #3044, .F. ) ; +#2728 = CIRCLE ( 'NONE', #3017, 7.249999999999999100 ) ; +#2729 = CARTESIAN_POINT ( 'NONE', ( 6.284087598535181000, 7.597114959037289100, -9.999983233560550700 ) ) ; +#2730 = ORIENTED_EDGE ( 'NONE', *, *, #2507, .T. ) ; +#2731 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2732 = ADVANCED_FACE ( 'NONE', ( #1345 ), #3909, .T. ) ; +#2733 = ORIENTED_EDGE ( 'NONE', *, *, #1307, .F. ) ; +#2734 = EDGE_CURVE ( 'NONE', #1890, #1445, #587, .T. ) ; +#2735 = CARTESIAN_POINT ( 'NONE', ( 1.194596757880897100, -14.13176217742977200, -5.393379945413422600 ) ) ; +#2736 = CARTESIAN_POINT ( 'NONE', ( 6.886639245251267000, 6.717980559623208100, -10.67635629706500400 ) ) ; +#2737 = EDGE_CURVE ( 'NONE', #3514, #3680, #3128, .T. ) ; +#2738 = LOCAL_TIME ( 17, 44, 58.00000000000000000, #2070 ) ; +#2739 = CARTESIAN_POINT ( 'NONE', ( 2.197294769279477300, 3.039234205622558500, -12.80982075460082500 ) ) ; +#2740 = CARTESIAN_POINT ( 'NONE', ( 7.115607587768039400, 8.054510599742881600, -9.788036085774424000 ) ) ; +#2741 = VECTOR ( 'NONE', #1190, 1000.000000000000000 ) ; +#2742 = CARTESIAN_POINT ( 'NONE', ( -2.145452391683820200, 8.477148850208680000, 7.268769722498118900 ) ) ; +#2743 = CARTESIAN_POINT ( 'NONE', ( 3.749999997595129000, 2.739074043614609300, 15.00001676643945100 ) ) ; +#2744 = CC_DESIGN_SECURITY_CLASSIFICATION ( #3295, ( #4170 ) ) ; +#2745 = CARTESIAN_POINT ( 'NONE', ( 2.218035521703013200, 2.833407602079245400, -12.84344496461366000 ) ) ; +#2746 = CARTESIAN_POINT ( 'NONE', ( 1.900823282161542500, 4.093044906001483500, -12.59382907888414800 ) ) ; +#2747 = TOROIDAL_SURFACE ( 'NONE', #1077, 6.000000000000000000, 1.000000000000000000 ) ; +#2748 = ADVANCED_FACE ( 'NONE', ( #2229 ), #1662, .T. ) ; +#2749 = CARTESIAN_POINT ( 'NONE', ( 7.027106003200246100, 7.982212254394600100, -9.857171356126366700 ) ) ; +#2750 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2258, #2137, #2055 ), + ( #2076, #2080, #2063 ), + ( #1973, #1989, #1925 ), + ( #1818, #1912, #1906 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( -1.084202172485504400E-018, 0.0005727473048052240000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7114797383807708300, 1.000000000000000000), + ( 1.000000000000000000, 0.7128523067122833900, 1.000000000000000000), + ( 1.000000000000000000, 0.7139929201054273600, 1.000000000000000000), + ( 1.000000000000000000, 0.7149077045844130000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2751 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000004900, -14.13176217742977800, -3.277205641478955200 ) ) ; +#2752 = EDGE_CURVE ( 'NONE', #3584, #1943, #3811, .T. ) ; +#2753 = CARTESIAN_POINT ( 'NONE', ( 1.249999999999995300, -14.13176217742977800, -3.277205641478953400 ) ) ; +#2754 = CARTESIAN_POINT ( 'NONE', ( 7.140871215621563000, 6.771056010298202900, -10.73102363898461100 ) ) ; +#2755 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000900, 7.499997531949966300, 7.500016766439439500 ) ) ; +#2756 = EDGE_LOOP ( 'NONE', ( #2996, #4071, #3098, #3112, #3208, #3257, #3315, #3421, #3517, #3973 ) ) ; +#2757 = FACE_OUTER_BOUND ( 'NONE', #1731, .T. ) ; +#2758 = ORIENTED_EDGE ( 'NONE', *, *, #4210, .T. ) ; +#2759 = CARTESIAN_POINT ( 'NONE', ( -2.115607587768825800, 8.054510599741211900, -9.788036085773889300 ) ) ; +#2760 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000001100, 7.499997531949966300, 7.500016766439441300 ) ) ; +#2761 = CARTESIAN_POINT ( 'NONE', ( 6.935791181956027200, 7.900519736344104000, -9.906280464758747700 ) ) ; +#2762 = VERTEX_POINT ( 'NONE', #2722 ) ; +#2763 = ORIENTED_EDGE ( 'NONE', *, *, #2553, .T. ) ; +#2764 = LINE ( 'NONE', #2503, #1428 ) ; +#2765 = ORIENTED_EDGE ( 'NONE', *, *, #1491, .T. ) ; +#2766 = CARTESIAN_POINT ( 'NONE', ( -2.075383036590705600, 8.465876896072929400, 7.322470175938779100 ) ) ; +#2767 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000001200, 7.499997531949966300, 7.500016766439443000 ) ) ; +#2768 = CARTESIAN_POINT ( 'NONE', ( 7.268529163573919800, 8.494184399873185900, 7.145708685344652100 ) ) ; +#2769 = ADVANCED_FACE ( 'NONE', ( #2901 ), #2016, .F. ) ; +#2770 = EDGE_LOOP ( 'NONE', ( #2615, #776 ) ) ; +#2771 = CIRCLE ( 'NONE', #3081, 1.000000000000000200 ) ; +#2772 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2773 = CARTESIAN_POINT ( 'NONE', ( 7.520020096497745500, 6.892314828284831700, -10.74275993508172000 ) ) ; +#2774 = ORIENTED_EDGE ( 'NONE', *, *, #864, .F. ) ; +#2775 = CARTESIAN_POINT ( 'NONE', ( 9.345383526986735100, 7.499997531949967200, 8.449210652307870700 ) ) ; +#2776 = ORIENTED_EDGE ( 'NONE', *, *, #2430, .F. ) ; +#2777 = CARTESIAN_POINT ( 'NONE', ( 1.249999999999988700, 2.499997531949967200, 15.00001676643945100 ) ) ; +#2778 = CIRCLE ( 'NONE', #3115, 3.189999999999994200 ) ; +#2779 = FACE_OUTER_BOUND ( 'NONE', #2357, .T. ) ; +#2780 = ORIENTED_EDGE ( 'NONE', *, *, #472, .T. ) ; +#2781 = CARTESIAN_POINT ( 'NONE', ( -2.168539197704551800, 8.097751269768396700, -9.746687208452108600 ) ) ; +#2782 = CARTESIAN_POINT ( 'NONE', ( 9.198056813958990200, 7.499997531955788300, 8.301959952478714700 ) ) ; +#2783 = CARTESIAN_POINT ( 'NONE', ( 6.785668311775547900, 7.780961622096552500, -9.959783093966015200 ) ) ; +#2784 = EDGE_CURVE ( 'NONE', #2161, #2350, #1248, .T. ) ; +#2785 = CIRCLE ( 'NONE', #314, 0.9999999999999998900 ) ; +#2786 = EDGE_LOOP ( 'NONE', ( #538, #433, #3843, #3610, #2673, #1128, #1582, #2765, #530, #38 ) ) ; +#2787 = DIRECTION ( 'NONE', ( 1.519290839321568100E-064, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#2788 = CARTESIAN_POINT ( 'NONE', ( 9.050806114131704700, 7.499997531949967200, 8.154633239452893500 ) ) ; +#2789 = FACE_OUTER_BOUND ( 'NONE', #2468, .T. ) ; +#2790 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2791 = CARTESIAN_POINT ( 'NONE', ( 7.643621724254342300, 6.938800118689402800, -10.73461234322426000 ) ) ; +#2792 = CARTESIAN_POINT ( 'NONE', ( 8.691260577169234800, 7.369860914863097400, 9.397688929544116800 ) ) ; +#2793 = CARTESIAN_POINT ( 'NONE', ( -0.7500000000000002200, 2.499997531949965000, 15.00001676643945300 ) ) ; +#2794 = CYLINDRICAL_SURFACE ( 'NONE', #2412, 2.500000000000000400 ) ; +#2795 = ADVANCED_FACE ( 'NONE', ( #400 ), #2794, .T. ) ; +#2796 = AXIS2_PLACEMENT_3D ( 'NONE', #905, #2875, #1232 ) ; +#2797 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2798 = CARTESIAN_POINT ( 'NONE', ( -2.218773238356757500, 8.135234319381924100, -9.698934801914617800 ) ) ; +#2799 = CARTESIAN_POINT ( 'NONE', ( 8.379645087678554200, 7.300111582244978700, 9.120371678760900400 ) ) ; +#2800 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2801 = CARTESIAN_POINT ( 'NONE', ( -1.925473379889363700, 8.444588471254281400, 7.409119429838328900 ) ) ; +#2802 = CARTESIAN_POINT ( 'NONE', ( 8.102327836895337800, 7.369860914863097400, 8.808756189270216200 ) ) ; +#2803 = CARTESIAN_POINT ( 'NONE', ( -1.935408987127796600, 7.900204938826772300, -9.906434983985398900 ) ) ; +#2804 = CYLINDRICAL_SURFACE ( 'NONE', #1106, 1.000000000000000900 ) ; +#2805 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9848077530122082400, 0.1736481776669296100 ) ) ; +#2806 = CARTESIAN_POINT ( 'NONE', ( 7.884462276265595400, 7.035063037484889000, -10.68423159510026600 ) ) ; +#2807 = CARTESIAN_POINT ( 'NONE', ( 7.784243968677202500, 6.994162334328049000, 10.71286301185748300 ) ) ; +#2808 = CARTESIAN_POINT ( 'NONE', ( 0.4499999999999854700, 2.499997531949966300, 13.40001676643945500 ) ) ; +#2809 = EDGE_CURVE ( 'NONE', #3574, #3212, #1911, .T. ) ; +#2810 = CARTESIAN_POINT ( 'NONE', ( 1.249999999999997800, 2.499997531949969400, 14.00001676643945100 ) ) ; +#2811 = CARTESIAN_POINT ( 'NONE', ( 6.733130343834139000, 7.741477086448109700, -9.974050884147615600 ) ) ; +#2812 = EDGE_CURVE ( 'NONE', #1185, #3424, #3698, .T. ) ; +#2813 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999996200, -14.13276217742979000, 6.500016766439448400 ) ) ; +#2814 = CARTESIAN_POINT ( 'NONE', ( 7.332219234744638200, 6.776139548259933100, 10.16779753169481300 ) ) ; +#2815 = ADVANCED_FACE ( 'NONE', ( #2689 ), #940, .F. ) ; +#2816 = ORIENTED_EDGE ( 'NONE', *, *, #240, .T. ) ; +#2817 = EDGE_CURVE ( 'NONE', #915, #1173, #1820, .T. ) ; +#2818 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 9.099997531949975700, -4.999983233560546300 ) ) ; +#2819 = ORIENTED_EDGE ( 'NONE', *, *, #1669, .F. ) ; +#2820 = CARTESIAN_POINT ( 'NONE', ( 6.787153754581969300, 6.994162334328049000, 9.715772797762250300 ) ) ; +#2821 = CARTESIAN_POINT ( 'NONE', ( 1.249999997226453500, 2.737768920673039100, 15.00001676643945100 ) ) ; +#2822 = ORIENTED_EDGE ( 'NONE', *, *, #3589, .F. ) ; +#2823 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 2.499997531949972100, -15.18694403236027700 ) ) ; +#2824 = VERTEX_POINT ( 'NONE', #2509 ) ; +#2825 = CARTESIAN_POINT ( 'NONE', ( 6.622537613324552400, 7.671532169498110700, -9.994036591513310700 ) ) ; +#2826 = FACE_OUTER_BOUND ( 'NONE', #1027, .T. ) ; +#2827 = ORIENTED_EDGE ( 'NONE', *, *, #963, .F. ) ; +#2828 = ORIENTED_EDGE ( 'NONE', *, *, #1344, .F. ) ; +#2829 = CC_DESIGN_APPROVAL ( #2971, ( #3295 ) ) ; +#2830 = LINE ( 'NONE', #2266, #2837 ) ; +#2831 = CARTESIAN_POINT ( 'NONE', ( -1.843482411637806800, 8.434343931494133500, 7.443192773450557600 ) ) ; +#2832 = CARTESIAN_POINT ( 'NONE', ( 7.494246628734714500, 6.839155526726689700, 11.13335915477404300 ) ) ; +#2833 = DIRECTION ( 'NONE', ( 1.337451350268914000E-032, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2834 = LINE ( 'NONE', #465, #881 ) ; +#2835 = ORIENTED_EDGE ( 'NONE', *, *, #3061, .F. ) ; +#2836 = CARTESIAN_POINT ( 'NONE', ( 8.001746125229104200, 7.084808409640937800, -10.64160911871112500 ) ) ; +#2837 = VECTOR ( 'NONE', #2326, 1000.000000000000000 ) ; +#2838 = EDGE_LOOP ( 'NONE', ( #3674, #3892, #3903, #3927 ) ) ; +#2839 = ORIENTED_EDGE ( 'NONE', *, *, #2924, .F. ) ; +#2840 = CARTESIAN_POINT ( 'NONE', ( 7.001724285053311900, 6.557585636363471700, 10.49829248138561900 ) ) ; +#2841 = CARTESIAN_POINT ( 'NONE', ( -0.7499999957680090200, 2.584585655726614900, 15.00001676643944900 ) ) ; +#2842 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1967, #1692, #1454, #1418 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0004005578544675279400 ), + .UNSPECIFIED. ) ; +#2843 = ADVANCED_FACE ( 'NONE', ( #1041 ), #3488, .F. ) ; +#2844 = CARTESIAN_POINT ( 'NONE', ( -2.311361241883813600, 8.199597282212408800, -9.588932465881324400 ) ) ; +#2845 = ORIENTED_EDGE ( 'NONE', *, *, #681, .T. ) ; +#2846 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999985800, 7.499997531949970800, -7.834640608427736000 ) ) ; +#2847 = AXIS2_PLACEMENT_3D ( 'NONE', #3591, #3575, #3565 ) ; +#2848 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#2849 = LINE ( 'NONE', #1211, #3756 ) ; +#2850 = CARTESIAN_POINT ( 'NONE', ( -1.675530606495425000, 8.420159126831841000, 7.488323476671295600 ) ) ; +#2851 = CARTESIAN_POINT ( 'NONE', ( 6.366657611665409000, 6.839155526726689700, 10.00577013770473700 ) ) ; +#2852 = CARTESIAN_POINT ( 'NONE', ( 2.768528700697118400, 2.627288019610056800, -12.87978940825533600 ) ) ; +#2853 = EDGE_CURVE ( 'NONE', #2043, #3068, #116, .T. ) ; +#2854 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000400, 9.999997531949972500, -14.99998323356054700 ) ) ; +#2855 = CARTESIAN_POINT ( 'NONE', ( 6.950051041069257500, 6.475535660198691100, 11.92244275688910300 ) ) ; +#2856 = CARTESIAN_POINT ( 'NONE', ( 0.4499999980022922300, 2.677266344786212400, 13.40001676910304500 ) ) ; +#2857 = CARTESIAN_POINT ( 'NONE', ( -2.389277050839124300, 8.247747006235787400, -9.457352151231297900 ) ) ; +#2858 = CARTESIAN_POINT ( 'NONE', ( 8.109345979613396000, 7.128758421777396500, -10.57608893798829700 ) ) ; +#2859 = CARTESIAN_POINT ( 'NONE', ( 6.410086907652178900, 6.065490206091412900, 11.08992985878782100 ) ) ; +#2860 = CARTESIAN_POINT ( 'NONE', ( 7.499253340664285600, 8.369912996715068900, -9.038619501124870200 ) ) ; +#2861 = CARTESIAN_POINT ( 'NONE', ( -0.8066476946896123900, 5.365441345150440400, -12.02799291373756100 ) ) ; +#2862 = PLANE ( 'NONE', #226 ) ; +#2863 = CARTESIAN_POINT ( 'NONE', ( 5.577574009550350100, 6.475535660198691100, 10.54996572537019400 ) ) ; +#2864 = CARTESIAN_POINT ( 'NONE', ( 1.222608074598497500, 2.972356244906652700, 15.00001676643945100 ) ) ; +#2865 = EDGE_CURVE ( 'NONE', #1952, #1376, #914, .T. ) ; +#2866 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 8.499997531949969000, 6.500016766439451000 ) ) ; +#2867 = CARTESIAN_POINT ( 'NONE', ( -2.353974954509385300, 8.226601112803631800, -9.525991148984854100 ) ) ; +#2868 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000002700, 7.621566414235089400, -9.999983233560549000 ) ) ; +#2869 = ORIENTED_EDGE ( 'NONE', *, *, #181, .T. ) ; +#2870 = VECTOR ( 'NONE', #520, 1000.000000000000000 ) ; +#2871 = VERTEX_POINT ( 'NONE', #2453 ) ; +#2872 = AXIS2_PLACEMENT_3D ( 'NONE', #3753, #3748, #3735 ) ; +#2873 = ORIENTED_EDGE ( 'NONE', *, *, #2346, .F. ) ; +#2874 = CARTESIAN_POINT ( 'NONE', ( 6.695866246607093500, 6.266931590422537100, 12.29101070885905300 ) ) ; +#2875 = DIRECTION ( 'NONE', ( -0.1473245215649239300, 0.9780546869635319300, 0.1473245215649241200 ) ) ; +#2876 = EDGE_CURVE ( 'NONE', #2871, #3680, #2123, .T. ) ; +#2877 = CIRCLE ( 'NONE', #3402, 7.500000000000000000 ) ; +#2878 = VERTEX_POINT ( 'NONE', #2459 ) ; +#2879 = ORIENTED_EDGE ( 'NONE', *, *, #2065, .T. ) ; +#2880 = CARTESIAN_POINT ( 'NONE', ( -0.7065094554611922600, 2.671409907156409200, 15.00001676643966800 ) ) ; +#2881 = CIRCLE ( 'NONE', #3146, 1.000000000000000900 ) ; +#2882 = ORIENTED_EDGE ( 'NONE', *, *, #4103, .F. ) ; +#2883 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2884 = EDGE_LOOP ( 'NONE', ( #1324, #1673, #1698, #1859 ) ) ; +#2885 = AXIS2_PLACEMENT_3D ( 'NONE', #3923, #4158, #3914 ) ; +#2886 = VECTOR ( 'NONE', #4040, 1000.000000000000000 ) ; +#2887 = ORIENTED_EDGE ( 'NONE', *, *, #544, .T. ) ; +#2888 = ADVANCED_FACE ( 'NONE', ( #2579 ), #192, .T. ) ; +#2889 = CARTESIAN_POINT ( 'NONE', ( 6.149272600709520200, 5.788275814531656000, 11.35074416572993300 ) ) ; +#2890 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.22971968983027400, -13.60559462543089800 ) ) ; +#2891 = LINE ( 'NONE', #4073, #2886 ) ; +#2892 = ORIENTED_EDGE ( 'NONE', *, *, #4232, .F. ) ; +#2893 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2894 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1483, #1468, #1459, #1455 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.570796326794896800, 1.779408668343380300 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9963766944304099900, 0.9963766944304099900, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#2895 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 9.099997531949975700, -6.199983233560558000 ) ) ; +#2896 = CARTESIAN_POINT ( 'NONE', ( 5.209006057580146500, 6.266931590422411000, 10.80415051983248500 ) ) ; +#2897 = CARTESIAN_POINT ( 'NONE', ( 0.4170208895009431300, 2.852078975454944900, 13.41634312032891800 ) ) ; +#2898 = VECTOR ( 'NONE', #3664, 1000.000000000000000 ) ; +#2899 = CARTESIAN_POINT ( 'NONE', ( 0.4499999999999840200, -6.631762177429775000, 7.500016766439451900 ) ) ; +#2900 = AXIS2_PLACEMENT_3D ( 'NONE', #3907, #3904, #3893 ) ; +#2901 = FACE_OUTER_BOUND ( 'NONE', #1319, .T. ) ; +#2902 = CARTESIAN_POINT ( 'NONE', ( 6.233065941527413200, 5.804131285342855900, 12.96207115122481600 ) ) ; +#2903 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#2904 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #3526, #3542, #3498, #3487 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.570796326794896600, 3.141592653589793600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#2905 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 7.499997531949969000, 14.00001676643945100 ) ) ; +#2906 = CARTESIAN_POINT ( 'NONE', ( 3.152585557998563500, 4.717685452716592600, -12.55699539601492100 ) ) ; +#2907 = VECTOR ( 'NONE', #1689, 1000.000000000000000 ) ; +#2908 = CARTESIAN_POINT ( 'NONE', ( 5.709402948583038700, 5.209499959167848400, 11.79061381785641600 ) ) ; +#2909 = ADVANCED_FACE ( 'NONE', ( #3590 ), #3185, .T. ) ; +#2910 = CARTESIAN_POINT ( 'NONE', ( 1.122537238263785300, 3.436355813056233700, 15.00001676643945100 ) ) ; +#2911 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 7.499997531949971700, -1.809983233560551500 ) ) ; +#2912 = CARTESIAN_POINT ( 'NONE', ( 4.537945615214888500, 5.804131285342981200, 11.26695082491191100 ) ) ; +#2913 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2914 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2915 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9540041959165601600, 0.2997932523816993500 ) ) ; +#2916 = CARTESIAN_POINT ( 'NONE', ( 6.024461871651670500, 5.549946490731639600, 13.26454705254443000 ) ) ; +#2917 = CARTESIAN_POINT ( 'NONE', ( -3.498506681328513900, 7.391593752587464600, -8.870153241979331000 ) ) ; +#2918 = CARTESIAN_POINT ( 'NONE', ( -0.5947575685538043500, 2.942335367754354000, 15.00001676643925000 ) ) ; +#2919 = ORIENTED_EDGE ( 'NONE', *, *, #896, .T. ) ; +#2920 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2921 = CARTESIAN_POINT ( 'NONE', ( -0.8101125247619656000, 5.262698706219315300, -13.90997744752290700 ) ) ; +#2922 = ORIENTED_EDGE ( 'NONE', *, *, #3251, .F. ) ; +#2923 = VERTEX_POINT ( 'NONE', #1934 ) ; +#2924 = EDGE_CURVE ( 'NONE', #1635, #785, #1707, .T. ) ; +#2925 = ADVANCED_FACE ( 'NONE', ( #4055 ), #1961, .T. ) ; +#2926 = AXIS2_PLACEMENT_3D ( 'NONE', #374, #498, #364 ) ; +#2927 = ORIENTED_EDGE ( 'NONE', *, *, #3451, .T. ) ; +#2928 = CARTESIAN_POINT ( 'NONE', ( 5.533408880225611200, 4.906485482231119900, 11.96660788621499100 ) ) ; +#2929 = CARTESIAN_POINT ( 'NONE', ( 5.464078098757158700, 3.515190641676530600, 15.00001676643906600 ) ) ; +#2930 = LINE ( 'NONE', #3995, #3160 ) ; +#2931 = ORIENTED_EDGE ( 'NONE', *, *, #3589, .T. ) ; +#2932 = VERTEX_POINT ( 'NONE', #1830 ) ; +#2933 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -13.13176217742977400, -9.626418191079084300 ) ) ; +#2934 = VECTOR ( 'NONE', #3116, 1000.000000000000000 ) ; +#2935 = CIRCLE ( 'NONE', #3002, 25.00000000000000000 ) ; +#2936 = ORIENTED_EDGE ( 'NONE', *, *, #1791, .F. ) ; +#2937 = AXIS2_PLACEMENT_3D ( 'NONE', #3436, #3905, #3721 ) ; +#2938 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2997932523816994000, -0.9540041959165602700 ) ) ; +#2939 = CARTESIAN_POINT ( 'NONE', ( 4.235469713895022400, 5.549946490731748800, 11.47555489478771000 ) ) ; +#2940 = PLANE ( 'NONE', #699 ) ; +#2941 = CARTESIAN_POINT ( 'NONE', ( 0.2988314413107900900, 3.205243259522863500, 13.47828118020960600 ) ) ; +#2942 = ORIENTED_EDGE ( 'NONE', *, *, #1344, .T. ) ; +#2943 = VECTOR ( 'NONE', #4101, 1000.000000000000000 ) ; +#2944 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000004400, 7.430064017866316200, 8.333350099772783200 ) ) ; +#2945 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 7.499997531949971700, -3.799983233560540400 ) ) ; +#2946 = ORIENTED_EDGE ( 'NONE', *, *, #3757, .F. ) ; +#2947 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 12.49999753194997600, -3.799983233560540800 ) ) ; +#2948 = LINE ( 'NONE', #3440, #2934 ) ; +#2949 = ORIENTED_EDGE ( 'NONE', *, *, #4185, .F. ) ; +#2950 = CARTESIAN_POINT ( 'NONE', ( 5.660842005322880500, 5.005750903364317500, 13.79179585872137700 ) ) ; +#2951 = FACE_OUTER_BOUND ( 'NONE', #3621, .T. ) ; +#2952 = EDGE_CURVE ( 'NONE', #2712, #89, #3283, .T. ) ; +#2953 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, -12.62837651615604200, -11.44657176888025800 ) ) ; +#2954 = CARTESIAN_POINT ( 'NONE', ( 5.263159855672062900, 4.314800233154967300, 12.23685691076618700 ) ) ; +#2955 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 12.49999753194997400, 1.445602611221717900E-015 ) ) ; +#2956 = ADVANCED_FACE ( 'NONE', ( #2486 ), #3679, .T. ) ; +#2957 = CARTESIAN_POINT ( 'NONE', ( 1.051320783323446600, 3.660910249245961100, 15.00001676643945100 ) ) ; +#2958 = EDGE_CURVE ( 'NONE', #3853, #656, #849, .T. ) ; +#2959 = EDGE_CURVE ( 'NONE', #4038, #1576, #2284, .T. ) ; +#2960 = CARTESIAN_POINT ( 'NONE', ( 0.01472440150092216600, 2.473287854180400200, -12.90694379245415400 ) ) ; +#2961 = LINE ( 'NONE', #1710, #2907 ) ; +#2962 = CARTESIAN_POINT ( 'NONE', ( 3.708220907718074300, 5.005750903364209100, 11.83917476111664500 ) ) ; +#2963 = EDGE_CURVE ( 'NONE', #3936, #3842, #1601, .T. ) ; +#2964 = AXIS2_PLACEMENT_3D ( 'NONE', #2383, #2094, #2273 ) ; +#2965 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000002200, -14.13176217742977600, -3.277205641478954800 ) ) ; +#2966 = APPROVAL_PERSON_ORGANIZATION ( #318, #2971, #753 ) ; +#2967 = CARTESIAN_POINT ( 'NONE', ( 5.505835197489720800, 4.715753562953613800, 14.01655573007972700 ) ) ; +#2968 = CARTESIAN_POINT ( 'NONE', ( -0.5355318242859006300, 3.111975210932401000, 15.00001676643945100 ) ) ; +#2969 = AXIS2_PLACEMENT_3D ( 'NONE', #2489, #228, #2157 ) ; +#2970 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, 7.499997531949970800, -7.834640608427721800 ) ) ; +#2971 = APPROVAL ( #783, 'UNSPECIFIED' ) ; +#2972 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1933, #1972, #1833, #1824 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.421391773956538700, 4.712388980384687900 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9929558256582531300, 0.9929558256582531300, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#2973 = ADVANCED_FACE ( 'NONE', ( #1401 ), #1787, .F. ) ; +#2974 = ORIENTED_EDGE ( 'NONE', *, *, #2536, .F. ) ; +#2975 = FACE_OUTER_BOUND ( 'NONE', #2568, .T. ) ; +#2976 = CARTESIAN_POINT ( 'NONE', ( 5.173130589785980500, 4.028858859704537400, 12.32688617665368500 ) ) ; +#2977 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2978 = ORIENTED_EDGE ( 'NONE', *, *, #4217, .F. ) ; +#2979 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3859, #3865, #3213, #3199, #3188, #3170, #3151, #3137 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0007974711293685863800, 0.001196206694052880100, 0.001594942258737173800 ), + .UNSPECIFIED. ) ; +#2980 = ORIENTED_EDGE ( 'NONE', *, *, #262, .T. ) ; +#2981 = CARTESIAN_POINT ( 'NONE', ( 2.830875532259570000, 3.244746686838859700, -12.77886437928319200 ) ) ; +#2982 = CARTESIAN_POINT ( 'NONE', ( 3.120285742226171600, 4.111075824597363300, 12.24464728904197700 ) ) ; +#2983 = ORIENTED_EDGE ( 'NONE', *, *, #4153, .T. ) ; +#2984 = CARTESIAN_POINT ( 'NONE', ( 0.2155427513809230800, 3.379957346877002300, 13.52318210511692300 ) ) ; +#2985 = EDGE_CURVE ( 'NONE', #2281, #1635, #2894, .T. ) ; +#2986 = LINE ( 'NONE', #1559, #284 ) ; +#2987 = ORIENTED_EDGE ( 'NONE', *, *, #4123, .F. ) ; +#2988 = CARTESIAN_POINT ( 'NONE', ( 1.237574050573737100, -14.13176217742977800, -4.335437512074963500 ) ) ; +#2989 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2868, #3230, #2825, #2811, #2783, #2761, #2749, #2740 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 8.673617379884035500E-019, 0.0001975789477935563200, 0.0003951578955871117800, 0.0007903157911742207400 ), + .UNSPECIFIED. ) ; +#2990 = ORIENTED_EDGE ( 'NONE', *, *, #1971, .F. ) ; +#2991 = VECTOR ( 'NONE', #4113, 1000.000000000000000 ) ; +#2992 = CARTESIAN_POINT ( 'NONE', ( 0.8848742722338650600, 4.099007995550965500, 15.00001676643945100 ) ) ; +#2993 = EDGE_CURVE ( 'NONE', #884, #3686, #453, .T. ) ; +#2994 = ORIENTED_EDGE ( 'NONE', *, *, #4168, .F. ) ; +#2995 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000700, 12.49999753194997300, 12.50001676643944900 ) ) ; +#2996 = ORIENTED_EDGE ( 'NONE', *, *, #2630, .T. ) ; +#2997 = CARTESIAN_POINT ( 'NONE', ( 5.749999999999994700, -14.13176217742977900, -3.277205641478955700 ) ) ; +#2998 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999994700, 7.499997531949969900, 6.500016766439451000 ) ) ; +#2999 = LINE ( 'NONE', #4155, #2991 ) ; +#3000 = ORIENTED_EDGE ( 'NONE', *, *, #2581, .T. ) ; +#3001 = VECTOR ( 'NONE', #4223, 1000.000000000000000 ) ; +#3002 = AXIS2_PLACEMENT_3D ( 'NONE', #3881, #3976, #3990 ) ; +#3003 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000002700, 7.621566414235089400, -9.999983233560549000 ) ) ; +#3004 = VERTEX_POINT ( 'NONE', #1404 ) ; +#3005 = CARTESIAN_POINT ( 'NONE', ( 3.805403241318023000, -14.13176217742977800, -5.393379945421051100 ) ) ; +#3006 = CARTESIAN_POINT ( 'NONE', ( -2.499747271799805000, 8.375321556613982900, -9.025844914749265900 ) ) ; +#3007 = ADVANCED_FACE ( 'NONE', ( #3389 ), #1384, .T. ) ; +#3008 = ORIENTED_EDGE ( 'NONE', *, *, #1161, .F. ) ; +#3009 = CARTESIAN_POINT ( 'NONE', ( -0.4640789052757179900, 3.514719217746074900, 15.00001676643945100 ) ) ; +#3010 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999997300, 12.49999753194997600, -8.999983233560549000 ) ) ; +#3011 = FACE_OUTER_BOUND ( 'NONE', #1549, .T. ) ; +#3012 = CARTESIAN_POINT ( 'NONE', ( -2.518124340344436900, 7.308441520088958800, -8.945349959035530300 ) ) ; +#3013 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 7.499997531949971700, -4.999983233560546300 ) ) ; +#3014 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.734723475976807100E-015, 0.0000000000000000000 ) ) ; +#3015 = CARTESIAN_POINT ( 'NONE', ( 5.159916756375520400, 3.796410373515098700, 14.51813746969496500 ) ) ; +#3016 = VECTOR ( 'NONE', #2669, 1000.000000000000000 ) ; +#3017 = AXIS2_PLACEMENT_3D ( 'NONE', #939, #934, #907 ) ; +#3018 = CARTESIAN_POINT ( 'NONE', ( 5.028604191002734100, 3.273735928596895200, 12.47141257543651200 ) ) ; +#3019 = CARTESIAN_POINT ( 'NONE', ( 0.02565212754439476900, 3.735979300262417500, 13.63289520668413100 ) ) ; +#3020 = EDGE_CURVE ( 'NONE', #1334, #3883, #1295, .T. ) ; +#3021 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#3022 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 7.499997531949969000, 14.00001676643944900 ) ) ; +#3023 = AXIS2_PLACEMENT_3D ( 'NONE', #3754, #4019, #3911 ) ; +#3024 = CARTESIAN_POINT ( 'NONE', ( 0.7894909766143669600, 4.313078461976272300, 15.00001676643945100 ) ) ; +#3025 = DIRECTION ( 'NONE', ( -0.5000000000000031100, -7.511572993685774400E-016, 0.8660254037844368200 ) ) ; +#3026 = ADVANCED_FACE ( 'NONE', ( #2951 ), #3860, .T. ) ; +#3027 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999997800, 7.049594539137469700, -9.999983233560549000 ) ) ; +#3028 = CARTESIAN_POINT ( 'NONE', ( 2.981879296744275500, 3.796410373515179500, 12.34010001006391400 ) ) ; +#3029 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3030 = AXIS2_PLACEMENT_3D ( 'NONE', #3791, #3312, #3563 ) ; +#3031 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3032 = CARTESIAN_POINT ( 'NONE', ( 5.032230439592178900, 3.154487910546114500, 14.70328262903077600 ) ) ; +#3033 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #3291, #3301, #3279, #3262 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 3.141592653589793100, 4.712388980384689700 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#3034 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 2.499997531949972100, -14.99998323356054700 ) ) ; +#3035 = CARTESIAN_POINT ( 'NONE', ( -0.3564962399772744800, 4.575537268429438400, -12.47814436845102100 ) ) ; +#3036 = ORIENTED_EDGE ( 'NONE', *, *, #3966, .F. ) ; +#3037 = CARTESIAN_POINT ( 'NONE', ( -0.4482372579176410200, 3.737409917606588500, 15.00001676643945600 ) ) ; +#3038 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999995100, 8.499997531949970800, 1.825589658340446700E-015 ) ) ; +#3039 = ORIENTED_EDGE ( 'NONE', *, *, #4217, .T. ) ; +#3040 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -14.13176217742977600, -2.203671148763222300E-015 ) ) ; +#3041 = CARTESIAN_POINT ( 'NONE', ( 5.001393557679329600, 2.858624416241482400, 12.49862320876033700 ) ) ; +#3042 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3043 = ORIENTED_EDGE ( 'NONE', *, *, #2153, .F. ) ; +#3044 = EDGE_CURVE ( 'NONE', #4091, #2519, #7, .T. ) ; +#3045 = VERTEX_POINT ( 'NONE', #1265 ) ; +#3046 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3709, #2032, #2803, #515, #2475, #220, #2141, #1151 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0009375171457004680900, 0.001338630677872401400, 0.001539187443958370300, 0.001739744210044339200 ), + .UNSPECIFIED. ) ; +#3047 = FACE_OUTER_BOUND ( 'NONE', #1066, .T. ) ; +#3048 = ORIENTED_EDGE ( 'NONE', *, *, #1257, .F. ) ; +#3049 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#3050 = CARTESIAN_POINT ( 'NONE', ( 2.796734137408885900, 3.154487910546035100, 12.46778632684728700 ) ) ; +#3051 = CARTESIAN_POINT ( 'NONE', ( -1.631869188944577800, 6.714409161062562200, -10.60038814472224700 ) ) ; +#3052 = ADVANCED_FACE ( 'NONE', ( #350 ), #1091, .T. ) ; +#3053 = EDGE_CURVE ( 'NONE', #721, #251, #2849, .T. ) ; +#3054 = ORIENTED_EDGE ( 'NONE', *, *, #262, .F. ) ; +#3055 = LINE ( 'NONE', #4088, #2943 ) ; +#3056 = LINE ( 'NONE', #33, #3368 ) ; +#3057 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 7.499997531949969000, 15.00001676643944600 ) ) ; +#3058 = VERTEX_POINT ( 'NONE', #1220 ) ; +#3059 = CARTESIAN_POINT ( 'NONE', ( -2.499253340664151500, 8.369912996713813100, -9.038619501127819000 ) ) ; +#3060 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3061 = EDGE_CURVE ( 'NONE', #3680, #3849, #3639, .T. ) ; +#3062 = VECTOR ( 'NONE', #4134, 1000.000000000000000 ) ; +#3063 = ORIENTED_EDGE ( 'NONE', *, *, #4205, .F. ) ; +#3064 = ORIENTED_EDGE ( 'NONE', *, *, #3427, .F. ) ; +#3065 = CARTESIAN_POINT ( 'NONE', ( 3.750000000002759100, -14.13176217742977800, -3.806382275134596600 ) ) ; +#3066 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 7.499997531949971700, -4.999983233560546300 ) ) ; +#3067 = CIRCLE ( 'NONE', #3171, 7.249999999999999100 ) ; +#3068 = VERTEX_POINT ( 'NONE', #1175 ) ; +#3069 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000004400, 8.499997531949970800, 6.500016766439446600 ) ) ; +#3070 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.827250478211416100, 14.75001676643739200 ) ) ; +#3071 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, -5.711846095760983600, -9.273070689112938000 ) ) ; +#3072 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #3138, #823, ( #3295 ) ) ; +#3073 = TOROIDAL_SURFACE ( 'NONE', #1464, 6.500000000000004400, 1.000000000000000000 ) ; +#3074 = CARTESIAN_POINT ( 'NONE', ( -1.105432561682613500, 5.758978726001200400, -11.72920804674367500 ) ) ; +#3075 = CARTESIAN_POINT ( 'NONE', ( 4.999999999997538900, 2.679459900919026100, 12.50001676644027000 ) ) ; +#3076 = CARTESIAN_POINT ( 'NONE', ( -0.08113437439488875600, 3.917731162255935200, 13.69779863026602800 ) ) ; +#3077 = ADVANCED_FACE ( 'NONE', ( #1866, #261 ), #1271, .F. ) ; +#3078 = CARTESIAN_POINT ( 'NONE', ( 2.750000000001236300, 2.827250478211477300, 12.50001676643944900 ) ) ; +#3079 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#3080 = CYLINDRICAL_SURFACE ( 'NONE', #1140, 3.189999999999994200 ) ; +#3081 = AXIS2_PLACEMENT_3D ( 'NONE', #1506, #1465, #1346 ) ; +#3082 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999996200, 8.416077315049584200, 7.500016766439451000 ) ) ; +#3083 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.499997531949969000, 14.75001676643944900 ) ) ; +#3084 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -11.63176217742977200, -14.39404467726971100 ) ) ; +#3085 = EDGE_CURVE ( 'NONE', #303, #3788, #1763, .T. ) ; +#3086 = CARTESIAN_POINT ( 'NONE', ( 1.249999999999995600, -14.13176217742977600, -3.806380437244941500 ) ) ; +#3087 = CARTESIAN_POINT ( 'NONE', ( -0.1583113895308528300, 6.246744848164101200, -11.17373620185443000 ) ) ; +#3088 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3089 = CARTESIAN_POINT ( 'NONE', ( 0.5887573630459510500, 4.737138825132094100, 15.00001676643945100 ) ) ; +#3090 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.559374635020935700E-016, 1.000000000000000000 ) ) ; +#3091 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3092 = EDGE_LOOP ( 'NONE', ( #727, #678, #3837, #832 ) ) ; +#3093 = VECTOR ( 'NONE', #3190, 1000.000000000000000 ) ; +#3094 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1340, #1354, #1296, #1226 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.517883041479706200E-018, 0.0003257081080810936800 ), + .UNSPECIFIED. ) ; +#3095 = CARTESIAN_POINT ( 'NONE', ( 4.550000000000005200, -6.631762177429775000, 7.500016766439451900 ) ) ; +#3096 = CARTESIAN_POINT ( 'NONE', ( 6.885965353467828900, 7.566210281523316500, 7.428731041672342900 ) ) ; +#3097 = ADVANCED_FACE ( 'NONE', ( #2072 ), #3439, .T. ) ; +#3098 = ORIENTED_EDGE ( 'NONE', *, *, #3900, .T. ) ; +#3099 = ORIENTED_EDGE ( 'NONE', *, *, #1322, .F. ) ; +#3100 = CARTESIAN_POINT ( 'NONE', ( 4.519454907718499100, -13.98963374802497500, -11.43448374273080700 ) ) ; +#3101 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 8.499997531949969000, 15.00001676643944700 ) ) ; +#3102 = ORIENTED_EDGE ( 'NONE', *, *, #3817, .F. ) ; +#3103 = CARTESIAN_POINT ( 'NONE', ( -0.4595407155581826000, 4.208558706602227400, 15.00001676643945100 ) ) ; +#3104 = CIRCLE ( 'NONE', #3649, 3.189999999999994200 ) ; +#3105 = ORIENTED_EDGE ( 'NONE', *, *, #2853, .F. ) ; +#3106 = ORIENTED_EDGE ( 'NONE', *, *, #4130, .F. ) ; +#3107 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.499997531949970300, 2.891202939038461700E-016 ) ) ; +#3108 = LINE ( 'NONE', #4098, #3001 ) ; +#3109 = EDGE_CURVE ( 'NONE', #251, #47, #56, .T. ) ; +#3110 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2322, #3977, #45, #1000, #3334, #1310, #3647, #3320, #666, #1033, #2648, #2417 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0008461824566923225300, 0.001692364913384645100, 0.002115456141730804500, 0.002538547370076964700, 0.003384729826769285800 ), + .UNSPECIFIED. ) ; +#3111 = EDGE_LOOP ( 'NONE', ( #383, #1638, #3521 ) ) ; +#3112 = ORIENTED_EDGE ( 'NONE', *, *, #3919, .T. ) ; +#3113 = CIRCLE ( 'NONE', #516, 1.000000000000000900 ) ; +#3114 = ORIENTED_EDGE ( 'NONE', *, *, #4130, .T. ) ; +#3115 = AXIS2_PLACEMENT_3D ( 'NONE', #1769, #1714, #1708 ) ; +#3116 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3117 = CARTESIAN_POINT ( 'NONE', ( 17.66362646489821100, 7.499997531949969000, 14.00001676643212500 ) ) ; +#3118 = LINE ( 'NONE', #4209, #3062 ) ; +#3119 = EDGE_LOOP ( 'NONE', ( #1229, #3611, #3746 ) ) ; +#3120 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000001800, 2.499997531949969400, 12.50001676643944900 ) ) ; +#3121 = CARTESIAN_POINT ( 'NONE', ( -0.2995318172751743100, 4.299884638619445800, 13.84072169955423000 ) ) ; +#3122 = EDGE_CURVE ( 'NONE', #3686, #2664, #2124, .T. ) ; +#3123 = ADVANCED_FACE ( 'NONE', ( #796 ), #1078, .T. ) ; +#3124 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3125 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#3126 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1566, #841, ( #3295 ) ) ; +#3127 = AXIS2_PLACEMENT_3D ( 'NONE', #608, #1476, #4171 ) ; +#3128 = CIRCLE ( 'NONE', #2537, 5.900000000000025200 ) ; +#3129 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3130 = CARTESIAN_POINT ( 'NONE', ( 4.550000000004853700, -12.53176217743624200, -3.794398853981880500 ) ) ; +#3131 = CARTESIAN_POINT ( 'NONE', ( 7.188155878561572900, 7.544251485754196000, 7.231743211528254300 ) ) ; +#3132 = CIRCLE ( 'NONE', #1201, 1.000000000000000900 ) ; +#3133 = CARTESIAN_POINT ( 'NONE', ( 0.4833253672286518300, 4.947095358664738800, 15.00001676643945100 ) ) ; +#3134 = CIRCLE ( 'NONE', #1197, 3.189999999999994200 ) ; +#3135 = CARTESIAN_POINT ( 'NONE', ( 0.5873404347537130000, 4.736558724630909500, 15.00001676643945500 ) ) ; +#3136 = DIRECTION ( 'NONE', ( 1.368455531567204500E-048, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#3137 = CARTESIAN_POINT ( 'NONE', ( -3.109345979613404000, 7.128758421777398300, -10.57608893798828100 ) ) ; +#3138 = DATE_AND_TIME ( #1467, #598 ) ; +#3139 = EDGE_CURVE ( 'NONE', #1690, #3949, #3331, .T. ) ; +#3140 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3141 = CARTESIAN_POINT ( 'NONE', ( 3.762425950227341600, -14.13176217742977800, -4.335437512067334100 ) ) ; +#3142 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3143 = ADVANCED_FACE ( 'NONE', ( #892 ), #1355, .T. ) ; +#3144 = CARTESIAN_POINT ( 'NONE', ( 4.743818956586973300, -13.80361754130484900, -11.55116998579633000 ) ) ; +#3145 = CARTESIAN_POINT ( 'NONE', ( -1.164872520713597500, 6.765216965439905500, -10.47955611138414700 ) ) ; +#3146 = AXIS2_PLACEMENT_3D ( 'NONE', #2810, #2790, #2772 ) ; +#3147 = ORIENTED_EDGE ( 'NONE', *, *, #3427, .T. ) ; +#3148 = CARTESIAN_POINT ( 'NONE', ( -0.4827942477694446800, 4.453868159485532300, 15.00001676643945100 ) ) ; +#3149 = CIRCLE ( 'NONE', #4213, 1.200000000000011700 ) ; +#3150 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -14.13176217742977800, 7.500016766439451000 ) ) ; +#3151 = CARTESIAN_POINT ( 'NONE', ( -3.003048576062420600, 7.085340405992226000, -10.64081602457108000 ) ) ; +#3152 = EDGE_LOOP ( 'NONE', ( #156, #1739, #687, #1264, #1882 ) ) ; +#3153 = VERTEX_POINT ( 'NONE', #665 ) ; +#3154 = ORIENTED_EDGE ( 'NONE', *, *, #751, .T. ) ; +#3155 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999997300, 7.597114959037289100, -9.999983233560549000 ) ) ; +#3156 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3157 = CARTESIAN_POINT ( 'NONE', ( -3.804893893685314100, 7.395029266955076800, -9.029746714737731500 ) ) ; +#3158 = VERTEX_POINT ( 'NONE', #652 ) ; +#3159 = VECTOR ( 'NONE', #294, 1000.000000000000000 ) ; +#3160 = VECTOR ( 'NONE', #4069, 1000.000000000000000 ) ; +#3161 = CARTESIAN_POINT ( 'NONE', ( 17.72932646513452000, 7.499997532174977400, 15.00001676621388700 ) ) ; +#3162 = ORIENTED_EDGE ( 'NONE', *, *, #3866, .T. ) ; +#3163 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.499997531949969000, 12.50001676643944900 ) ) ; +#3164 = ORIENTED_EDGE ( 'NONE', *, *, #1706, .F. ) ; +#3165 = CARTESIAN_POINT ( 'NONE', ( -0.4112894094951586300, 4.500235712887917600, 13.91873456666475000 ) ) ; +#3166 = LINE ( 'NONE', #119, #3159 ) ; +#3167 = ADVANCED_FACE ( 'NONE', ( #4195 ), #3232, .T. ) ; +#3168 = ORIENTED_EDGE ( 'NONE', *, *, #1491, .F. ) ; +#3169 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 7.499997531949969000, 14.00001676643945100 ) ) ; +#3170 = CARTESIAN_POINT ( 'NONE', ( -2.884226349624442700, 7.034963129994933300, -10.68431613901207600 ) ) ; +#3171 = AXIS2_PLACEMENT_3D ( 'NONE', #3967, #3917, #3808 ) ; +#3172 = LINE ( 'NONE', #4005, #3223 ) ; +#3173 = ORIENTED_EDGE ( 'NONE', *, *, #2587, .F. ) ; +#3174 = VERTEX_POINT ( 'NONE', #620 ) ; +#3175 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3176 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 3.244746686838859700, -12.77886437928319200 ) ) ; +#3177 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999999100, 7.499997531949970800, -7.834640608427721800 ) ) ; +#3178 = EDGE_CURVE ( 'NONE', #1863, #3004, #601, .T. ) ; +#3179 = VECTOR ( 'NONE', #2805, 1000.000000000000000 ) ; +#3180 = AXIS2_PLACEMENT_3D ( 'NONE', #795, #778, #766 ) ; +#3181 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999996200, 7.430064017866316200, 8.333350099772783200 ) ) ; +#3182 = CARTESIAN_POINT ( 'NONE', ( 17.66362646489822600, 8.499997531956951800, 15.00001676643944700 ) ) ; +#3183 = CARTESIAN_POINT ( 'NONE', ( 4.572366709440102800, -12.54483568500238300, -4.311482145875388000 ) ) ; +#3184 = CARTESIAN_POINT ( 'NONE', ( 0.3793103448275844100, 5.157631858570338700, 15.00001676643945100 ) ) ; +#3185 = CYLINDRICAL_SURFACE ( 'NONE', #2272, 2.500000000000000400 ) ; +#3186 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4203, #4174, #4058, #4001 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 6.497171635837162800E-005 ), + .UNSPECIFIED. ) ; +#3187 = AXIS2_PLACEMENT_3D ( 'NONE', #1040, #966, #902 ) ; +#3188 = CARTESIAN_POINT ( 'NONE', ( -2.643151738458890500, 6.938617892498927000, -10.73467536391563800 ) ) ; +#3189 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3894, #3827, #3812 ), + ( #3800, #3768, #3755 ), + ( #3738, #3731, #3717 ), + ( #3714, #3705, #3691 ), + ( #3670, #3652, #3640 ), + ( #3554, #3527, #3499 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( 0.002275211543372595300, 0.002712391491031273600, 0.003149571438689951900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.6102702726634954300, 1.000000000000000000), + ( 1.000000000000000000, 0.6213804887140637100, 1.000000000000000000), + ( 1.000000000000000000, 0.6374250179240081900, 1.000000000000000000), + ( 1.000000000000000000, 0.6730593137062683700, 1.000000000000000000), + ( 1.000000000000000000, 0.6925641821851934400, 1.000000000000000000), + ( 1.000000000000000000, 0.7099301615799623600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3190 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.006177025403371000E-032, -1.734723475976807600E-016 ) ) ; +#3191 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122082400, 0.1736481776669296100 ) ) ; +#3192 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, 13.36823782257022600, -3.277205641478951700 ) ) ; +#3193 = ADVANCED_FACE ( 'NONE', ( #1645 ), #584, .F. ) ; +#3194 = FACE_OUTER_BOUND ( 'NONE', #4169, .T. ) ; +#3195 = CARTESIAN_POINT ( 'NONE', ( 17.82724520025940500, 7.516112753926398300, 13.99034763325359900 ) ) ; +#3196 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3197 = EDGE_CURVE ( 'NONE', #915, #3068, #692, .T. ) ; +#3198 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3199 = CARTESIAN_POINT ( 'NONE', ( -2.520170948258301500, 6.892369930545559200, -10.74275248126877000 ) ) ; +#3200 = EDGE_LOOP ( 'NONE', ( #3323, #3624, #3741, #3787 ) ) ; +#3201 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, -5.711846095760983600, -9.273070689112938000 ) ) ; +#3202 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3203 = ORIENTED_EDGE ( 'NONE', *, *, #1898, .T. ) ; +#3204 = CYLINDRICAL_SURFACE ( 'NONE', #363, 1.000000000000000900 ) ; +#3205 = EDGE_CURVE ( 'NONE', #3004, #624, #2438, .T. ) ; +#3206 = CARTESIAN_POINT ( 'NONE', ( -1.660904406572899500, 6.246744848163807300, -12.67632921889652000 ) ) ; +#3207 = AXIS2_PLACEMENT_3D ( 'NONE', #1200, #1038, #1095 ) ; +#3208 = ORIENTED_EDGE ( 'NONE', *, *, #3952, .T. ) ; +#3209 = CARTESIAN_POINT ( 'NONE', ( -0.5172413793103486400, 4.714692804133614200, 14.00001676643945100 ) ) ; +#3210 = EDGE_LOOP ( 'NONE', ( #2618, #277, #2936, #2949, #2974 ) ) ; +#3211 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3212 = VERTEX_POINT ( 'NONE', #547 ) ; +#3213 = CARTESIAN_POINT ( 'NONE', ( -2.141133506206417200, 6.771126196807087700, -10.73105597762745100 ) ) ; +#3214 = FACE_OUTER_BOUND ( 'NONE', #3801, .T. ) ; +#3215 = ORIENTED_EDGE ( 'NONE', *, *, #3560, .F. ) ; +#3216 = ORIENTED_EDGE ( 'NONE', *, *, #786, .T. ) ; +#3217 = CYLINDRICAL_SURFACE ( 'NONE', #3231, 1.200000000000005700 ) ; +#3218 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999997300, 2.499997531949971200, -7.834640608427721800 ) ) ; +#3219 = FACE_OUTER_BOUND ( 'NONE', #1315, .T. ) ; +#3220 = ORIENTED_EDGE ( 'NONE', *, *, #1239, .F. ) ; +#3221 = ORIENTED_EDGE ( 'NONE', *, *, #3585, .F. ) ; +#3222 = CARTESIAN_POINT ( 'NONE', ( 17.95503846485407400, 7.529081760482820400, 14.97093253790681700 ) ) ; +#3223 = VECTOR ( 'NONE', #358, 1000.000000000000000 ) ; +#3224 = ORIENTED_EDGE ( 'NONE', *, *, #2377, .F. ) ; +#3225 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 7.499997531949971700, -8.189983233560539600 ) ) ; +#3226 = CARTESIAN_POINT ( 'NONE', ( 5.720207480959591500, -14.13176217742977800, -4.260786647754833300 ) ) ; +#3227 = CIRCLE ( 'NONE', #3390, 10.02277622698624000 ) ; +#3228 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, -13.88176217742977400, 7.500016766439451000 ) ) ; +#3229 = ORIENTED_EDGE ( 'NONE', *, *, #4028, .F. ) ; +#3230 = CARTESIAN_POINT ( 'NONE', ( 6.564789596197419600, 7.640402732795561900, -9.999983233560550700 ) ) ; +#3231 = AXIS2_PLACEMENT_3D ( 'NONE', #1499, #229, #3833 ) ; +#3232 = CYLINDRICAL_SURFACE ( 'NONE', #1810, 1.000000000000000900 ) ; +#3233 = CARTESIAN_POINT ( 'NONE', ( 2.768528700697118400, 2.627288019610056800, -12.87978940825533600 ) ) ; +#3234 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -8.019335917570373600E-017 ) ) ; +#3235 = EDGE_CURVE ( 'NONE', #2707, #3849, #4003, .T. ) ; +#3236 = CARTESIAN_POINT ( 'NONE', ( -2.499253340664267900, 8.369912996714960600, -9.038619501125101200 ) ) ; +#3237 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3475, #3444, #3442 ), + ( #3433, #3420, #3413 ), + ( #3404, #3400, #3392 ), + ( #3378, #3371, #3356 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 7.561238444308250100, 7.853981633974482800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9789590656556042000, 1.000000000000000000), + ( 1.000000000000000000, 0.9789590656556042000, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3238 = CARTESIAN_POINT ( 'NONE', ( 2.756178866277457600, 2.454879399963495700, -12.91018969960573100 ) ) ; +#3239 = CIRCLE ( 'NONE', #503, 1.000000000000000000 ) ; +#3240 = CARTESIAN_POINT ( 'NONE', ( 6.175210994631164000, 6.747595387856067700, -10.47242612937174600 ) ) ; +#3241 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669295500, 0.9848077530122082400 ) ) ; +#3242 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 7.499997531949971700, -1.809983233560551500 ) ) ; +#3243 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#3244 = DIRECTION ( 'NONE', ( -0.6156075877680353700, 0.0000000000000000000, 0.7880528522138732200 ) ) ; +#3245 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, 2.109289132199381200, -12.97112658808280400 ) ) ; +#3246 = AXIS2_PLACEMENT_3D ( 'NONE', #1517, #1414, #1424 ) ; +#3247 = DIRECTION ( 'NONE', ( -0.7501486990912169500, -0.3064041732943068000, -0.5859977916678418300 ) ) ; +#3248 = CARTESIAN_POINT ( 'NONE', ( 17.82724520025938700, 8.509666665135819500, 14.98390154446302200 ) ) ; +#3249 = ORIENTED_EDGE ( 'NONE', *, *, #77, .F. ) ; +#3250 = VECTOR ( 'NONE', #3288, 1000.000000000000000 ) ; +#3251 = EDGE_CURVE ( 'NONE', #560, #1940, #4120, .T. ) ; +#3252 = ADVANCED_FACE ( 'NONE', ( #304 ), #424, .F. ) ; +#3253 = AXIS2_PLACEMENT_3D ( 'NONE', #818, #141, #2064 ) ; +#3254 = EDGE_LOOP ( 'NONE', ( #4219, #2006, #4147 ) ) ; +#3255 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, 2.672504536910174100, -15.15652639302458300 ) ) ; +#3256 = CARTESIAN_POINT ( 'NONE', ( 4.584480437982946900, 2.857760985448300600, 13.41711072354047800 ) ) ; +#3257 = ORIENTED_EDGE ( 'NONE', *, *, #1046, .F. ) ; +#3258 = CARTESIAN_POINT ( 'NONE', ( 7.731215175536075200, 8.054510599742881600, -10.57608893798829700 ) ) ; +#3259 = ORIENTED_EDGE ( 'NONE', *, *, #2963, .F. ) ; +#3260 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000003600, 8.499997531949972500, -7.834640608427721800 ) ) ; +#3261 = EDGE_LOOP ( 'NONE', ( #2521, #2776, #2828, #2922 ) ) ; +#3262 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 7.499997531949969900, 7.500016766439451900 ) ) ; +#3263 = VECTOR ( 'NONE', #4150, 1000.000000000000000 ) ; +#3264 = FACE_OUTER_BOUND ( 'NONE', #2556, .T. ) ; +#3265 = VERTEX_POINT ( 'NONE', #305 ) ; +#3266 = CARTESIAN_POINT ( 'NONE', ( 7.300223940566411300, 7.140393453232857900, -9.696555132175023000 ) ) ; +#3267 = ORIENTED_EDGE ( 'NONE', *, *, #3699, .F. ) ; +#3268 = LINE ( 'NONE', #855, #3263 ) ; +#3269 = ORIENTED_EDGE ( 'NONE', *, *, #1984, .T. ) ; +#3270 = CARTESIAN_POINT ( 'NONE', ( 5.517241379310347900, 4.714692804133613400, 14.00001676643944700 ) ) ; +#3271 = LINE ( 'NONE', #519, #3179 ) ; +#3272 = EDGE_LOOP ( 'NONE', ( #1902, #3739, #2504, #877 ) ) ; +#3273 = ORIENTED_EDGE ( 'NONE', *, *, #1239, .T. ) ; +#3274 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000004400, 7.499997531949962800, 7.500016766439451000 ) ) ; +#3275 = EDGE_CURVE ( 'NONE', #3788, #2374, #3361, .T. ) ; +#3276 = CIRCLE ( 'NONE', #3555, 3.189999999999994200 ) ; +#3277 = CARTESIAN_POINT ( 'NONE', ( 4.704224571286629500, -12.63545391941262600, -5.871711557154498000 ) ) ; +#3278 = ADVANCED_FACE ( 'NONE', ( #216 ), #1146, .T. ) ; +#3279 = CARTESIAN_POINT ( 'NONE', ( -0.7530483272049394200, 7.499997531949968100, 10.42894895457397400 ) ) ; +#3280 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3281 = CARTESIAN_POINT ( 'NONE', ( -1.347720541681071800, 5.942166846758201600, -13.13044582299012900 ) ) ; +#3282 = EDGE_CURVE ( 'NONE', #1498, #4182, #1453, .T. ) ; +#3283 = CIRCLE ( 'NONE', #2246, 1.000000000000000900 ) ; +#3284 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, 12.49999753194997600, -14.99998323356054700 ) ) ; +#3285 = CARTESIAN_POINT ( 'NONE', ( 3.949383667501408000, 3.662895308014311200, 15.00001676643945100 ) ) ; +#3286 = EDGE_CURVE ( 'NONE', #3849, #3351, #2566, .T. ) ; +#3287 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3288 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#3289 = CIRCLE ( 'NONE', #1214, 2.249999999999998700 ) ; +#3290 = PLANE ( 'NONE', #860 ) ; +#3291 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, 2.499997531949969900, 12.50001676643945100 ) ) ; +#3292 = AXIS2_PLACEMENT_3D ( 'NONE', #1879, #1209, #1169 ) ; +#3293 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 9.999997531949972500, -14.99998323356054700 ) ) ; +#3294 = CARTESIAN_POINT ( 'NONE', ( 18.14820640982125300, 7.579955907957383900, 13.95204174083499300 ) ) ; +#3295 = SECURITY_CLASSIFICATION ( '', '', #862 ) ; +#3296 = ADVANCED_FACE ( 'NONE', ( #3692 ), #1812, .T. ) ; +#3297 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3298 = CARTESIAN_POINT ( 'NONE', ( 4.550000000000002500, 2.499997531949970800, 13.40001676643945100 ) ) ; +#3299 = VERTEX_POINT ( 'NONE', #127 ) ; +#3300 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000004400, 12.49999753194997400, 6.500016766439447500 ) ) ; +#3301 = CARTESIAN_POINT ( 'NONE', ( 2.249999999999999100, 5.428929720084492600, 12.50001676643944900 ) ) ; +#3302 = ORIENTED_EDGE ( 'NONE', *, *, #1411, .F. ) ; +#3303 = AXIS2_PLACEMENT_3D ( 'NONE', #2478, #221, #2142 ) ; +#3304 = CYLINDRICAL_SURFACE ( 'NONE', #146, 5.000000000000000000 ) ; +#3305 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 12.49999753194997600, -6.199983233560551800 ) ) ; +#3306 = CARTESIAN_POINT ( 'NONE', ( 18.37689272740113800, 7.637598267720976600, 14.86241603066822700 ) ) ; +#3307 = EDGE_LOOP ( 'NONE', ( #568, #716, #922, #1072 ) ) ; +#3308 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1450, #1390, #1149, #1132, #1813, #808, #1030, #1044, #4078, #920, #11, #852 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0008461824566923245900, 0.001692364913384649200, 0.002115456141730810200, 0.002538547370076970700, 0.003384729826769293200 ), + .UNSPECIFIED. ) ; +#3309 = EDGE_LOOP ( 'NONE', ( #2472, #2564 ) ) ; +#3310 = EDGE_CURVE ( 'NONE', #145, #1440, #1245, .T. ) ; +#3311 = ORIENTED_EDGE ( 'NONE', *, *, #2985, .F. ) ; +#3312 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#3313 = FACE_OUTER_BOUND ( 'NONE', #337, .T. ) ; +#3314 = ORIENTED_EDGE ( 'NONE', *, *, #289, .F. ) ; +#3315 = ORIENTED_EDGE ( 'NONE', *, *, #501, .F. ) ; +#3316 = FACE_OUTER_BOUND ( 'NONE', #2317, .T. ) ; +#3317 = ORIENTED_EDGE ( 'NONE', *, *, #840, .F. ) ; +#3318 = AXIS2_PLACEMENT_3D ( 'NONE', #1379, #1365, #1361 ) ; +#3319 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3320 = CARTESIAN_POINT ( 'NONE', ( 8.106740132245812800, 7.580340569967744600, -5.562179372537922700 ) ) ; +#3321 = ADVANCED_FACE ( 'NONE', ( #2789 ), #1042, .T. ) ; +#3322 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.243794116878613800E-016, -1.000000000000000000 ) ) ; +#3323 = ORIENTED_EDGE ( 'NONE', *, *, #466, .T. ) ; +#3324 = FACE_OUTER_BOUND ( 'NONE', #3803, .T. ) ; +#3325 = CARTESIAN_POINT ( 'NONE', ( 18.14820640982127000, 8.547972557554423600, 14.92005839043202900 ) ) ; +#3326 = EDGE_LOOP ( 'NONE', ( #96, #3520, #4125, #3780 ) ) ; +#3327 = CARTESIAN_POINT ( 'NONE', ( 9.786846704165594000, 7.499997531949971700, -7.834640608427721800 ) ) ; +#3328 = ORIENTED_EDGE ( 'NONE', *, *, #54, .T. ) ; +#3329 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000900, 2.282139502573950400, -12.94064840416031700 ) ) ; +#3330 = DATE_AND_TIME ( #4194, #984 ) ; +#3331 = CIRCLE ( 'NONE', #1900, 2.500000000000000400 ) ; +#3332 = EDGE_CURVE ( 'NONE', #884, #2664, #1036, .T. ) ; +#3333 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3334 = CARTESIAN_POINT ( 'NONE', ( 8.060221113998794700, 7.601891418216801800, -4.715470910571304400 ) ) ; +#3335 = CARTESIAN_POINT ( 'NONE', ( -0.5172413793103486400, 4.714692804133614200, 15.00001676643945100 ) ) ; +#3336 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3337 = CARTESIAN_POINT ( 'NONE', ( 18.30553915567294300, 7.627682274521283100, 13.92340592089669300 ) ) ; +#3338 = CARTESIAN_POINT ( 'NONE', ( -2.448894155124921900, 8.283472435855259200, -9.323821448785095000 ) ) ; +#3339 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999300, 8.499997531949969000, 15.00001676643945100 ) ) ; +#3340 = CIRCLE ( 'NONE', #1250, 1.000000000000000000 ) ; +#3341 = ADVANCED_FACE ( 'NONE', ( #500 ), #2226, .T. ) ; +#3342 = CARTESIAN_POINT ( 'NONE', ( 5.337214921453334400, -14.13176217742977400, -7.400675086928049300 ) ) ; +#3343 = DIRECTION ( 'NONE', ( 0.8965517241379311600, 0.4429390544367283700, 0.0000000000000000000 ) ) ; +#3344 = EDGE_CURVE ( 'NONE', #1440, #3888, #311, .T. ) ; +#3345 = AXIS2_PLACEMENT_3D ( 'NONE', #2105, #1968, #1957 ) ; +#3346 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 7.499997531949972500, -14.99998323356054700 ) ) ; +#3347 = CARTESIAN_POINT ( 'NONE', ( 6.631869188944572000, 6.714409161062627100, -10.60038814472224500 ) ) ; +#3348 = CARTESIAN_POINT ( 'NONE', ( 18.56889891408288700, 7.714472307385629600, 14.78554199100392500 ) ) ; +#3349 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3350 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, 2.499997531949969900, 12.50001676643945100 ) ) ; +#3351 = VERTEX_POINT ( 'NONE', #733 ) ; +#3352 = CIRCLE ( 'NONE', #170, 1.000000000000000000 ) ; +#3353 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -13.13176217742977600, -12.24597178207973200 ) ) ; +#3354 = ORIENTED_EDGE ( 'NONE', *, *, #607, .F. ) ; +#3355 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3356 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, 7.499997531949970800, -7.834640608427721800 ) ) ; +#3357 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.243794116878613800E-016, -1.000000000000000000 ) ) ; +#3358 = ADVANCED_FACE ( 'NONE', ( #3011 ), #2629, .T. ) ; +#3359 = ORIENTED_EDGE ( 'NONE', *, *, #501, .T. ) ; +#3360 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3361 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #315, #319, #273, #266, #259, #255, #238, #230 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0007225294579058746400, 0.001445058915811749300, 0.002890117831623499900 ), + .UNSPECIFIED. ) ; +#3362 = ORIENTED_EDGE ( 'NONE', *, *, #2007, .T. ) ; +#3363 = CARTESIAN_POINT ( 'NONE', ( 0.8428850363568041200, -14.12242611751863700, -11.36409589903269100 ) ) ; +#3364 = CARTESIAN_POINT ( 'NONE', ( 18.30553915567291100, 8.576608377492815900, 14.87233202386814700 ) ) ; +#3365 = EDGE_LOOP ( 'NONE', ( #1275, #2919 ) ) ; +#3366 = CIRCLE ( 'NONE', #3303, 1.000000000000000000 ) ; +#3367 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3368 = VECTOR ( 'NONE', #4104, 1000.000000000000000 ) ; +#3369 = VERTEX_POINT ( 'NONE', #4043 ) ; +#3370 = VERTEX_POINT ( 'NONE', #4025 ) ; +#3371 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, 7.499997531949970800, -7.834640608427721800 ) ) ; +#3372 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, 7.499997531949970800, -7.834640608427721800 ) ) ; +#3373 = VECTOR ( 'NONE', #2213, 1000.000000000000000 ) ; +#3374 = LINE ( 'NONE', #3546, #3373 ) ; +#3375 = AXIS2_PLACEMENT_3D ( 'NONE', #2028, #2058, #2091 ) ; +#3376 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9809572502584816800, 0.1942237708554717700 ) ) ; +#3377 = ORIENTED_EDGE ( 'NONE', *, *, #417, .F. ) ; +#3378 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, 7.499997531949970800, -7.834640608427721800 ) ) ; +#3379 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.499997531949972100, -15.44080068533170500 ) ) ; +#3380 = ORIENTED_EDGE ( 'NONE', *, *, #3969, .T. ) ; +#3381 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#3382 = CARTESIAN_POINT ( 'NONE', ( -2.300223940566418400, 7.140393453232860600, -9.696555132175017600 ) ) ; +#3383 = LINE ( 'NONE', #268, #3422 ) ; +#3384 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3385 = CARTESIAN_POINT ( 'NONE', ( 9.494937180754282800, 7.499997531949970800, -8.182959794114424300 ) ) ; +#3386 = ADVANCED_FACE ( 'NONE', ( #3906, #3540 ), #4070, .F. ) ; +#3387 = CARTESIAN_POINT ( 'NONE', ( -2.366025403784434800, 8.499997531949969000, 7.000016766439451000 ) ) ; +#3388 = CARTESIAN_POINT ( 'NONE', ( 8.498506681328535700, 7.391593752587547300, -8.870153241978941900 ) ) ; +#3389 = FACE_OUTER_BOUND ( 'NONE', #3792, .T. ) ; +#3390 = AXIS2_PLACEMENT_3D ( 'NONE', #2444, #1782, #1276 ) ; +#3391 = CARTESIAN_POINT ( 'NONE', ( 6.392302010502314500, 7.605910863362940000, -9.999983233560549000 ) ) ; +#3392 = CARTESIAN_POINT ( 'NONE', ( 9.292473527109997600, 7.499997531949970800, -8.322589900072047800 ) ) ; +#3393 = CARTESIAN_POINT ( 'NONE', ( -1.499999999999999300, 7.621566414235024600, -9.999983233560549000 ) ) ; +#3394 = EDGE_CURVE ( 'NONE', #2664, #736, #3824, .T. ) ; +#3395 = CARTESIAN_POINT ( 'NONE', ( 18.60787800615253900, 7.752915126822222700, 13.84826620951606400 ) ) ; +#3396 = FACE_OUTER_BOUND ( 'NONE', #134, .T. ) ; +#3397 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 9.099997531949975700, -4.999983233560546300 ) ) ; +#3398 = CARTESIAN_POINT ( 'NONE', ( 8.992619356897508400, 7.463731536043507500, -8.529385879532887000 ) ) ; +#3399 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -11.63176217742977400, -3.277205641478954800 ) ) ; +#3400 = CARTESIAN_POINT ( 'NONE', ( 9.402142229854243600, 7.499997531953442700, -8.432498378570002700 ) ) ; +#3401 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 12.49999753194997300, 12.50001676643944900 ) ) ; +#3402 = AXIS2_PLACEMENT_3D ( 'NONE', #1788, #1777, #1762 ) ; +#3403 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, -5.711846095760983600, -16.52307068911293800 ) ) ; +#3404 = CARTESIAN_POINT ( 'NONE', ( 9.512050708351253500, 7.499997531949970800, -8.542167081314366000 ) ) ; +#3405 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9809572502584816800, 0.1942237708554717700 ) ) ; +#3406 = ADVANCED_FACE ( 'NONE', ( #2122 ), #3073, .T. ) ; +#3407 = CARTESIAN_POINT ( 'NONE', ( -2.271317018335476500, 6.752967993093813300, -10.56332359009564400 ) ) ; +#3408 = ORIENTED_EDGE ( 'NONE', *, *, #2924, .T. ) ; +#3409 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, -6.631762177429775000, 12.50001676643945100 ) ) ; +#3410 = CIRCLE ( 'NONE', #1147, 3.189999999999994200 ) ; +#3411 = ORIENTED_EDGE ( 'NONE', *, *, #396, .T. ) ; +#3412 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000002700, 12.49999753194997600, -9.999983233560549000 ) ) ; +#3413 = CARTESIAN_POINT ( 'NONE', ( 8.585193071788735300, 7.428083097835148000, -8.810369524436584500 ) ) ; +#3414 = VERTEX_POINT ( 'NONE', #3793 ) ; +#3415 = EDGE_CURVE ( 'NONE', #27, #915, #4201, .T. ) ; +#3416 = ORIENTED_EDGE ( 'NONE', *, *, #4200, .T. ) ; +#3417 = FACE_OUTER_BOUND ( 'NONE', #1667, .T. ) ; +#3418 = ORIENTED_EDGE ( 'NONE', *, *, #3895, .F. ) ; +#3419 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -13.13176217742977800, -9.626418191079084300 ) ) ; +#3420 = CARTESIAN_POINT ( 'NONE', ( 8.804893893693478200, 7.395029266951051600, -9.029746714738491800 ) ) ; +#3421 = ORIENTED_EDGE ( 'NONE', *, *, #816, .F. ) ; +#3422 = VECTOR ( 'NONE', #2196, 1000.000000000000000 ) ; +#3423 = CARTESIAN_POINT ( 'NONE', ( -1.717179417204846200, 6.979054802251809500, -10.09865480345905000 ) ) ; +#3424 = VERTEX_POINT ( 'NONE', #3823 ) ; +#3425 = EDGE_LOOP ( 'NONE', ( #2481, #2513, #2545, #2602 ) ) ; +#3426 = CARTESIAN_POINT ( 'NONE', ( 7.115607587768039400, 8.054510599742881600, -9.788036085774424000 ) ) ; +#3427 = EDGE_CURVE ( 'NONE', #3068, #1683, #4109, .T. ) ; +#3428 = TOROIDAL_SURFACE ( 'NONE', #1167, 7.249999999999999100, 2.250000000000000000 ) ; +#3429 = ADVANCED_FACE ( 'NONE', ( #4064 ), #4061, .F. ) ; +#3430 = ORIENTED_EDGE ( 'NONE', *, *, #1958, .F. ) ; +#3431 = AXIS2_PLACEMENT_3D ( 'NONE', #2723, #2169, #2121 ) ; +#3432 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2182, #2138, #2224, #3510 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0004754075193504216700 ), + .UNSPECIFIED. ) ; +#3433 = CARTESIAN_POINT ( 'NONE', ( 9.024271083993982100, 7.428083097836006000, -9.249447536641353600 ) ) ; +#3434 = FACE_OUTER_BOUND ( 'NONE', #1532, .T. ) ; +#3435 = AXIS2_PLACEMENT_3D ( 'NONE', #2026, #2015, #2011 ) ; +#3436 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999800, 9.999997531949972500, -14.99998323356054700 ) ) ; +#3437 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669291100, 0.9848077530122082400 ) ) ; +#3438 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#3439 = CYLINDRICAL_SURFACE ( 'NONE', #1930, 1.000000000000000900 ) ; +#3440 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 6.747595387856067700, -10.47242612937174600 ) ) ; +#3441 = CARTESIAN_POINT ( 'NONE', ( -1.839224809267385300, 6.449225214279215900, -10.99541579916170000 ) ) ; +#3442 = CARTESIAN_POINT ( 'NONE', ( 7.907796518166665400, 7.287276781321650400, -9.277539561416228200 ) ) ; +#3443 = CARTESIAN_POINT ( 'NONE', ( -2.507185563758883400, 7.399359797685750800, -8.833467685867635300 ) ) ; +#3444 = CARTESIAN_POINT ( 'NONE', ( 8.246554370876552300, 7.193677170664308600, -9.588086237551166800 ) ) ; +#3445 = DIRECTION ( 'NONE', ( 0.4429390544367284300, -0.8965517241379311600, 0.0000000000000000000 ) ) ; +#3446 = CIRCLE ( 'NONE', #1223, 1.000000000000000400 ) ; +#3447 = EDGE_CURVE ( 'NONE', #2557, #683, #3915, .T. ) ; +#3448 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3449 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, -11.63176217742977400, -3.277205641478954800 ) ) ; +#3450 = ADVANCED_FACE ( 'NONE', ( #4015 ), #3730, .F. ) ; +#3451 = EDGE_CURVE ( 'NONE', #4092, #3058, #3816, .T. ) ; +#3452 = CARTESIAN_POINT ( 'NONE', ( 18.90751515912731800, 7.898443762042719900, 14.60157053634656800 ) ) ; +#3453 = CARTESIAN_POINT ( 'NONE', ( 7.389277050840284700, 8.247747006236588500, -9.457352151229407900 ) ) ; +#3454 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000003600, 12.49999753194997600, -8.999983233560552500 ) ) ; +#3455 = VERTEX_POINT ( 'NONE', #3426 ) ; +#3456 = CIRCLE ( 'NONE', #194, 1.200000000000005700 ) ; +#3457 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3458 = CARTESIAN_POINT ( 'NONE', ( 7.650098369944563700, 7.471518978644814600, 8.037866380361832000 ) ) ; +#3459 = ORIENTED_EDGE ( 'NONE', *, *, #3757, .T. ) ; +#3460 = ORIENTED_EDGE ( 'NONE', *, *, #240, .F. ) ; +#3461 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 8.499997531949969000, 15.00001676643945100 ) ) ; +#3462 = ORIENTED_EDGE ( 'NONE', *, *, #756, .F. ) ; +#3463 = VERTEX_POINT ( 'NONE', #3409 ) ; +#3464 = ADVANCED_FACE ( 'NONE', ( #3763 ), #3596, .F. ) ; +#3465 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 7.499997531949971700, -3.383320003323663000 ) ) ; +#3466 = ORIENTED_EDGE ( 'NONE', *, *, #1843, .F. ) ; +#3467 = CARTESIAN_POINT ( 'NONE', ( 7.318660140941836400, 8.205447601768366200, -9.594654873272007800 ) ) ; +#3468 = CARTESIAN_POINT ( 'NONE', ( 0.3793103448275868500, 5.157631858570339600, 14.00001676643945100 ) ) ; +#3469 = CYLINDRICAL_SURFACE ( 'NONE', #3470, 7.500000000000000000 ) ; +#3470 = AXIS2_PLACEMENT_3D ( 'NONE', #951, #1557, #2797 ) ; +#3471 = ORIENTED_EDGE ( 'NONE', *, *, #646, .F. ) ; +#3472 = ORIENTED_EDGE ( 'NONE', *, *, #341, .T. ) ; +#3473 = LINE ( 'NONE', #3826, #3571 ) ; +#3474 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -5.711846095760983600, -9.273070689112938000 ) ) ; +#3475 = CARTESIAN_POINT ( 'NONE', ( 8.557101047011492800, 7.287276781321650400, -9.926844090261054600 ) ) ; +#3476 = CARTESIAN_POINT ( 'NONE', ( 6.848731260333621200, 7.433402018222241600, 8.314245885384272200 ) ) ; +#3477 = EDGE_CURVE ( 'NONE', #2762, #1863, #3033, .T. ) ; +#3478 = ORIENTED_EDGE ( 'NONE', *, *, #2501, .F. ) ; +#3479 = CARTESIAN_POINT ( 'NONE', ( 4.924759808917950300, -13.52832308987976600, -11.76734910855686400 ) ) ; +#3480 = CARTESIAN_POINT ( 'NONE', ( 18.60787800615256800, 8.651748088873262100, 14.74709917156718200 ) ) ; +#3481 = CIRCLE ( 'NONE', #3528, 1.000000000000000000 ) ; +#3482 = ORIENTED_EDGE ( 'NONE', *, *, #1702, .F. ) ; +#3483 = ORIENTED_EDGE ( 'NONE', *, *, #4076, .F. ) ; +#3484 = CARTESIAN_POINT ( 'NONE', ( 4.967705876143007500, -12.94981307503503500, -8.529217632410489400 ) ) ; +#3485 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 7.499997531949971700, -4.999983233560546300 ) ) ; +#3486 = AXIS2_PLACEMENT_3D ( 'NONE', #3013, #2977, #3029 ) ; +#3487 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999300, 8.499997531949969000, 15.00001676643945100 ) ) ; +#3488 = CYLINDRICAL_SURFACE ( 'NONE', #2347, 25.00000000000000000 ) ; +#3489 = CARTESIAN_POINT ( 'NONE', ( -1.588482073040764700, 8.416077315049584200, 7.500016766439450100 ) ) ; +#3490 = CARTESIAN_POINT ( 'NONE', ( 5.410575847201341700, -14.13176217742977400, -6.864287352823119200 ) ) ; +#3491 = CARTESIAN_POINT ( 'NONE', ( -4.292473527111341400, 7.499997531949970800, -8.322589900075998400 ) ) ; +#3492 = ADVANCED_FACE ( 'NONE', ( #3707 ), #2255, .T. ) ; +#3493 = CARTESIAN_POINT ( 'NONE', ( 18.75287669307839200, 7.830418539536693400, 13.80176416188745500 ) ) ; +#3494 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122082400, 0.1736481776669296100 ) ) ; +#3495 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1537, #1378, #1358 ), + ( #1343, #1335, #1328 ), + ( #1304, #1292, #1274 ), + ( #1251, #1237, #1221 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.005275861505433699000, 0.005599939380795337100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8739442499921857800, 1.000000000000000000), + ( 1.000000000000000000, 0.8622492423661141100, 1.000000000000000000), + ( 1.000000000000000000, 0.8497542132000504000, 1.000000000000000000), + ( 1.000000000000000000, 0.8365390274333585100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3496 = EDGE_CURVE ( 'NONE', #3153, #3788, #3497, .T. ) ; +#3497 = LINE ( 'NONE', #2671, #3549 ) ; +#3498 = CARTESIAN_POINT ( 'NONE', ( -13.96446609406725700, 8.499997531949969000, 15.00001676643944900 ) ) ; +#3499 = CARTESIAN_POINT ( 'NONE', ( 7.499253340664162200, 8.369912996713882300, -9.038619501127655600 ) ) ; +#3500 = EDGE_CURVE ( 'NONE', #4182, #578, #3545, .T. ) ; +#3501 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.1942237708554719900, 0.9809572502584815700 ) ) ; +#3502 = CARTESIAN_POINT ( 'NONE', ( -2.907796518163433800, 7.287276781320978900, -9.277539561418455700 ) ) ; +#3503 = EDGE_CURVE ( 'NONE', #683, #145, #1493, .T. ) ; +#3504 = CARTESIAN_POINT ( 'NONE', ( 19.05388842466225400, 8.003105359582798800, 14.49690893880712000 ) ) ; +#3505 = AXIS2_PLACEMENT_3D ( 'NONE', #3107, #3079, #3125 ) ; +#3506 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669296100, -0.9848077530122082400 ) ) ; +#3507 = ADVANCED_FACE ( 'NONE', ( #3960 ), #2717, .F. ) ; +#3508 = EDGE_LOOP ( 'NONE', ( #2994, #3043, #3064, #3105 ) ) ; +#3509 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000004400, 8.416077315049584200, 7.500016766439451000 ) ) ; +#3510 = CARTESIAN_POINT ( 'NONE', ( -1.631869188944567100, 6.714409161062627100, -10.60038814472224200 ) ) ; +#3511 = ORIENTED_EDGE ( 'NONE', *, *, #3560, .T. ) ; +#3512 = ORIENTED_EDGE ( 'NONE', *, *, #1663, .T. ) ; +#3513 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #2342, #878, ( #4170 ) ) ; +#3514 = VERTEX_POINT ( 'NONE', #2379 ) ; +#3515 = CARTESIAN_POINT ( 'NONE', ( 7.221547902356415500, 8.141054919687221100, -9.705278106626297000 ) ) ; +#3516 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#3517 = ORIENTED_EDGE ( 'NONE', *, *, #108, .F. ) ; +#3518 = CIRCLE ( 'NONE', #3857, 5.000000000000000000 ) ; +#3519 = CARTESIAN_POINT ( 'NONE', ( 18.75287669307830300, 8.698250136502061000, 14.66959575885278400 ) ) ; +#3520 = ORIENTED_EDGE ( 'NONE', *, *, #312, .F. ) ; +#3521 = ORIENTED_EDGE ( 'NONE', *, *, #1194, .F. ) ; +#3522 = DIRECTION ( 'NONE', ( -0.8660254037844384900, 0.0000000000000000000, 0.5000000000000004400 ) ) ; +#3523 = FACE_OUTER_BOUND ( 'NONE', #525, .T. ) ; +#3524 = FACE_OUTER_BOUND ( 'NONE', #3848, .T. ) ; +#3525 = ORIENTED_EDGE ( 'NONE', *, *, #4208, .F. ) ; +#3526 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 9.999997531949969000, 12.50001676643944900 ) ) ; +#3527 = CARTESIAN_POINT ( 'NONE', ( 7.507185563758862500, 7.399359797685946200, -8.833467685867386600 ) ) ; +#3528 = AXIS2_PLACEMENT_3D ( 'NONE', #2866, #1261, #895 ) ; +#3529 = VERTEX_POINT ( 'NONE', #2466 ) ; +#3530 = VECTOR ( 'NONE', #333, 1000.000000000000000 ) ; +#3531 = ORIENTED_EDGE ( 'NONE', *, *, #3813, .F. ) ; +#3532 = ORIENTED_EDGE ( 'NONE', *, *, #3952, .F. ) ; +#3533 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3534 = EDGE_CURVE ( 'NONE', #3158, #2056, #3340, .T. ) ; +#3535 = LINE ( 'NONE', #3150, #3530 ) ; +#3536 = VERTEX_POINT ( 'NONE', #2345 ) ; +#3537 = CARTESIAN_POINT ( 'NONE', ( -2.735985804968383000, 6.979054802251694100, -11.11746119122264000 ) ) ; +#3538 = CYLINDRICAL_SURFACE ( 'NONE', #1254, 10.02277622698624000 ) ; +#3539 = DIRECTION ( 'NONE', ( -0.5000000000000004400, 9.679977338656814900E-016, -0.8660254037844384900 ) ) ; +#3540 = FACE_OUTER_BOUND ( 'NONE', #3365, .T. ) ; +#3541 = AXIS2_PLACEMENT_3D ( 'NONE', #2395, #2394, #2380 ) ; +#3542 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999800, 9.121317875509610900, 13.96448286050671300 ) ) ; +#3543 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.499997531949972100, -15.18694403236027300 ) ) ; +#3544 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.243794116878613800E-016, 1.000000000000000000 ) ) ; +#3545 = CIRCLE ( 'NONE', #1351, 27.25000000000000000 ) ; +#3546 = CARTESIAN_POINT ( 'NONE', ( 1.249999999999998000, -14.13176217742977600, -2.203671148763222300E-015 ) ) ; +#3547 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #4117, #4121, #4100 ), + ( #4229, #3767, #3758 ), + ( #3484, #4052, #3899 ), + ( #4084, #3342, #3779 ), + ( #3774, #3490, #3550 ), + ( #3277, #4196, #3737 ), + ( #4189, #3625, #3005 ), + ( #3183, #3226, #3141 ), + ( #3130, #2632, #3065 ), + ( #2616, #2997, #2751 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001588996558687338200, 0.003177993117374676400, 0.004766989676062014700, 0.006355986234749352900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.6731557049601958300, 1.000000000000000000), + ( 1.000000000000000000, 0.6402811618826042000, 1.000000000000000000), + ( 1.000000000000000000, 0.5791414085475251600, 1.000000000000000000), + ( 1.000000000000000000, 0.5508540443870849600, 1.000000000000000000), + ( 1.000000000000000000, 0.5024262956447828100, 1.000000000000000000), + ( 1.000000000000000000, 0.4823399019979009400, 1.000000000000000000), + ( 1.000000000000000000, 0.4546736294547350500, 1.000000000000000000), + ( 1.000000000000000000, 0.4471529736629740200, 1.000000000000000000), + ( 1.000000000000000000, 0.4472135954999598200, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3548 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 7.499997531949971700, -4.999983233560546300 ) ) ; +#3549 = VECTOR ( 'NONE', #2657, 1000.000000000000000 ) ; +#3550 = CARTESIAN_POINT ( 'NONE', ( 3.898798287865986400, -14.13176217742977400, -6.980019526905155500 ) ) ; +#3551 = CARTESIAN_POINT ( 'NONE', ( -3.232050807568873200, 8.499997531949969000, 7.500016766439451900 ) ) ; +#3552 = EDGE_CURVE ( 'NONE', #3045, #4141, #3446, .T. ) ; +#3553 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#3554 = CARTESIAN_POINT ( 'NONE', ( 8.498506681322510300, 7.391593752587986900, -8.870153241976860100 ) ) ; +#3555 = AXIS2_PLACEMENT_3D ( 'NONE', #2818, #535, #2491 ) ; +#3556 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000014700, -14.13176217742977800, 7.500016766439451000 ) ) ; +#3557 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, 1.182853392398731200E-015, 14.75001676643945100 ) ) ; +#3558 = ORIENTED_EDGE ( 'NONE', *, *, #327, .T. ) ; +#3559 = FACE_OUTER_BOUND ( 'NONE', #2756, .T. ) ; +#3560 = EDGE_CURVE ( 'NONE', #1116, #426, #3289, .T. ) ; +#3561 = CARTESIAN_POINT ( 'NONE', ( -3.232050807568874100, 7.499997531949969900, 7.500016766439451900 ) ) ; +#3562 = EDGE_LOOP ( 'NONE', ( #2758, #3162, #1325, #476, #4124 ) ) ; +#3563 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3564 = ORIENTED_EDGE ( 'NONE', *, *, #4168, .T. ) ; +#3565 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9540041959165601600, 0.2997932523816993500 ) ) ; +#3566 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3567 = AXIS2_PLACEMENT_3D ( 'NONE', #3632, #3600, #3578 ) ; +#3568 = LINE ( 'NONE', #993, #4133 ) ; +#3569 = ORIENTED_EDGE ( 'NONE', *, *, #3666, .F. ) ; +#3570 = ORIENTED_EDGE ( 'NONE', *, *, #2330, .T. ) ; +#3571 = VECTOR ( 'NONE', #510, 1000.000000000000000 ) ; +#3572 = CARTESIAN_POINT ( 'NONE', ( 7.499253340664302500, 8.369912996715054700, -9.038619501124868400 ) ) ; +#3573 = ORIENTED_EDGE ( 'NONE', *, *, #4210, .F. ) ; +#3574 = VERTEX_POINT ( 'NONE', #2201 ) ; +#3575 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2997932523816994000, -0.9540041959165602700 ) ) ; +#3576 = ORIENTED_EDGE ( 'NONE', *, *, #4232, .T. ) ; +#3577 = EDGE_LOOP ( 'NONE', ( #4215, #83, #103, #106, #186, #366 ) ) ; +#3578 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3579 = ADVANCED_FACE ( 'NONE', ( #3396 ), #3080, .F. ) ; +#3580 = ORIENTED_EDGE ( 'NONE', *, *, #4179, .T. ) ; +#3581 = ORIENTED_EDGE ( 'NONE', *, *, #2725, .F. ) ; +#3582 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -14.13176217742977400, -11.35960056912458200 ) ) ; +#3583 = CARTESIAN_POINT ( 'NONE', ( 19.02497447201963600, 8.012228462850519200, 13.69267820789907800 ) ) ; +#3584 = VERTEX_POINT ( 'NONE', #2021 ) ; +#3585 = EDGE_CURVE ( 'NONE', #2824, #2207, #3134, .T. ) ; +#3586 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999300, 8.499997531949969000, 15.00001676643944700 ) ) ; +#3587 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3588 = EDGE_CURVE ( 'NONE', #3514, #3153, #3132, .T. ) ; +#3589 = EDGE_CURVE ( 'NONE', #534, #3991, #3239, .T. ) ; +#3590 = FACE_OUTER_BOUND ( 'NONE', #1502, .T. ) ; +#3591 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, -12.62837651615604200, -11.44657176888025800 ) ) ; +#3592 = CARTESIAN_POINT ( 'NONE', ( 0.4012831491858037100, 2.918718426983150300, 13.42419216243257400 ) ) ; +#3593 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999300, 7.499997531949969000, 15.00001676643944600 ) ) ; +#3594 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000400, 7.499997531949976100, -14.99998323356054700 ) ) ; +#3595 = CARTESIAN_POINT ( 'NONE', ( 19.30515419966117500, 8.226596812075770900, 14.27341748631317000 ) ) ; +#3596 = CYLINDRICAL_SURFACE ( 'NONE', #1332, 3.189999999999994200 ) ; +#3597 = ADVANCED_FACE ( 'NONE', ( #3194 ), #2804, .T. ) ; +#3598 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -11.63176217742977200, -14.39404467726971100 ) ) ; +#3599 = CARTESIAN_POINT ( 'NONE', ( 5.482785568507631000, 4.453802443338978500, 15.00001676643945100 ) ) ; +#3600 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3601 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999300, 7.499997531949969000, 14.00001676643944900 ) ) ; +#3602 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3603 = EDGE_CURVE ( 'NONE', #3212, #1938, #2961, .T. ) ; +#3604 = CARTESIAN_POINT ( 'NONE', ( 19.02497447201972500, 8.807336090490242200, 14.48778583553883700 ) ) ; +#3605 = EDGE_CURVE ( 'NONE', #1063, #3045, #741, .T. ) ; +#3606 = ORIENTED_EDGE ( 'NONE', *, *, #2132, .T. ) ; +#3607 = VERTEX_POINT ( 'NONE', #1950 ) ; +#3608 = CARTESIAN_POINT ( 'NONE', ( -12.66362646489821800, 8.499997531956951800, 15.00001676643944700 ) ) ; +#3609 = CARTESIAN_POINT ( 'NONE', ( 4.785267840620345900, 3.381543345394977300, 13.52363952462729700 ) ) ; +#3610 = ORIENTED_EDGE ( 'NONE', *, *, #217, .F. ) ; +#3611 = ORIENTED_EDGE ( 'NONE', *, *, #1612, .F. ) ; +#3612 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -14.13176217742977400, -11.35960056912458200 ) ) ; +#3613 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 7.499997531949970800, 8.673614525627818800E-016 ) ) ; +#3614 = ADVANCED_FACE ( 'NONE', ( #2694 ), #2747, .T. ) ; +#3615 = ORIENTED_EDGE ( 'NONE', *, *, #162, .F. ) ; +#3616 = CIRCLE ( 'NONE', #3878, 1.000000000000000000 ) ; +#3617 = ORIENTED_EDGE ( 'NONE', *, *, #1764, .T. ) ; +#3618 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3619 = EDGE_LOOP ( 'NONE', ( #4231, #40, #87, #148 ) ) ; +#3620 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1720, #1735, #1670, #1631, #1616, #1607, #1578, #1568 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0005309982768587233100, 0.0007964974152880862100, 0.001061996553717449000 ), + .UNSPECIFIED. ) ; +#3621 = EDGE_LOOP ( 'NONE', ( #572, #831, #1135, #1243 ) ) ; +#3622 = CARTESIAN_POINT ( 'NONE', ( -3.060000000000003600, 7.499997531949971700, -4.999983233560546300 ) ) ; +#3623 = ORIENTED_EDGE ( 'NONE', *, *, #3666, .T. ) ; +#3624 = ORIENTED_EDGE ( 'NONE', *, *, #2698, .F. ) ; +#3625 = CARTESIAN_POINT ( 'NONE', ( 5.618891047116621400, -14.13176217742977600, -5.284717687013637600 ) ) ; +#3626 = ORIENTED_EDGE ( 'NONE', *, *, #1915, .F. ) ; +#3627 = EDGE_LOOP ( 'NONE', ( #1176, #1371, #1632, #1745, #1801 ) ) ; +#3628 = ORIENTED_EDGE ( 'NONE', *, *, #2034, .T. ) ; +#3629 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 12.49999753194997600, -14.99998323356054700 ) ) ; +#3630 = EDGE_CURVE ( 'NONE', #2607, #27, #8, .T. ) ; +#3631 = ORIENTED_EDGE ( 'NONE', *, *, #445, .F. ) ; +#3632 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 8.499997531949969000, 14.00001676643945100 ) ) ; +#3633 = CARTESIAN_POINT ( 'NONE', ( -12.72932646513436700, 7.499997532174977400, 15.00001676621388700 ) ) ; +#3634 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3635 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.243794116878613800E-016, -1.000000000000000000 ) ) ; +#3636 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#3637 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3638 = CARTESIAN_POINT ( 'NONE', ( 19.15206688216547100, 8.116530508182693300, 13.63009698069981500 ) ) ; +#3639 = LINE ( 'NONE', #1236, #2741 ) ; +#3640 = CARTESIAN_POINT ( 'NONE', ( 7.496469121552077100, 8.339425753588829000, -9.110628016030380700 ) ) ; +#3641 = ADVANCED_FACE ( 'NONE', ( #2588 ), #3495, .T. ) ; +#3642 = CARTESIAN_POINT ( 'NONE', ( -8.454637394217846300E-016, 2.619204683932431900, -15.15646584843778700 ) ) ; +#3643 = EDGE_CURVE ( 'NONE', #3045, #3672, #2697, .T. ) ; +#3644 = AXIS2_PLACEMENT_3D ( 'NONE', #4144, #4074, #4048 ) ; +#3645 = CARTESIAN_POINT ( 'NONE', ( 6.175210994631164000, 7.597114959037289100, -9.999983233560550700 ) ) ; +#3646 = CARTESIAN_POINT ( 'NONE', ( -12.66362646489820200, 7.499997531949969000, 14.00001676643212500 ) ) ; +#3647 = CARTESIAN_POINT ( 'NONE', ( 8.069292443434775900, 7.597272074224296300, -5.281490843624650800 ) ) ; +#3648 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.243794116878613800E-016 ) ) ; +#3649 = AXIS2_PLACEMENT_3D ( 'NONE', #3066, #3060, #3042 ) ; +#3650 = DIRECTION ( 'NONE', ( -4.956352788505163400E-017, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#3651 = CARTESIAN_POINT ( 'NONE', ( -2.355084497043963900, 6.765216965440198600, -11.66976808771447200 ) ) ; +#3652 = CARTESIAN_POINT ( 'NONE', ( 7.518062028151978100, 7.308959413921096300, -8.944712649035429000 ) ) ; +#3653 = CARTESIAN_POINT ( 'NONE', ( -12.82724520025937700, 8.509666665135819500, 14.98390154446302200 ) ) ; +#3654 = CARTESIAN_POINT ( 'NONE', ( -12.95503846485424400, 7.529081760482777800, 14.97093253790681700 ) ) ; +#3655 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000002200, -13.13176217742977800, -3.277205641478954800 ) ) ; +#3656 = ADVANCED_FACE ( 'NONE', ( #2496 ), #2187, .F. ) ; +#3657 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669298900, 0.9848077530122082400 ) ) ; +#3658 = EDGE_LOOP ( 'NONE', ( #674, #2978, #3615, #3736 ) ) ; +#3659 = EDGE_CURVE ( 'NONE', #2762, #736, #2393, .T. ) ; +#3660 = FACE_OUTER_BOUND ( 'NONE', #3778, .T. ) ; +#3661 = CARTESIAN_POINT ( 'NONE', ( 19.41147321350131700, 8.344395373611183300, 14.15561892477823800 ) ) ; +#3662 = VERTEX_POINT ( 'NONE', #975 ) ; +#3663 = VERTEX_POINT ( 'NONE', #950 ) ; +#3664 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3665 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3666 = EDGE_CURVE ( 'NONE', #1854, #1381, #2631, .T. ) ; +#3667 = EDGE_CURVE ( 'NONE', #2207, #1081, #2237, .T. ) ; +#3668 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.559374635020935700E-016, -1.000000000000000000 ) ) ; +#3669 = CARTESIAN_POINT ( 'NONE', ( -12.82724520025938600, 7.516112753926397400, 13.99034763325359900 ) ) ; +#3670 = CARTESIAN_POINT ( 'NONE', ( 8.555462868413254500, 7.350864279319929500, -9.062552765692940300 ) ) ; +#3671 = ORIENTED_EDGE ( 'NONE', *, *, #3919, .F. ) ; +#3672 = VERTEX_POINT ( 'NONE', #886 ) ; +#3673 = EDGE_LOOP ( 'NONE', ( #1523, #1586, #1855, #2095 ) ) ; +#3674 = ORIENTED_EDGE ( 'NONE', *, *, #1322, .T. ) ; +#3675 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 7.499997531949976100, -14.99998323356054700 ) ) ; +#3676 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999997300, 8.385741033500860200, -8.999983233560549000 ) ) ; +#3677 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9848077530122082400, 0.1736481776669298900 ) ) ; +#3678 = EDGE_LOOP ( 'NONE', ( #3416, #1594, #3719, #2510 ) ) ; +#3679 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1807, #1889, #1748 ), + ( #1741, #1729, #1724 ), + ( #1721, #1717, #1700 ), + ( #1665, #1660, #1651 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0008815418589265736500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.6193624979933685100, 1.000000000000000000), + ( 1.000000000000000000, 0.6115601126354565100, 1.000000000000000000), + ( 1.000000000000000000, 0.6099950795361821500, 1.000000000000000000), + ( 1.000000000000000000, 0.6102702726634945400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3680 = VERTEX_POINT ( 'NONE', #858 ) ; +#3681 = CARTESIAN_POINT ( 'NONE', ( 19.15206688216547100, 8.869917317689603600, 14.38348379020672300 ) ) ; +#3682 = EDGE_LOOP ( 'NONE', ( #3623, #3671, #3725, #3796 ) ) ; +#3683 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, -4.452896807675744000, -16.41292689845144500 ) ) ; +#3684 = DIRECTION ( 'NONE', ( -9.912705577010326800E-017, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#3685 = ORIENTED_EDGE ( 'NONE', *, *, #2853, .T. ) ; +#3686 = VERTEX_POINT ( 'NONE', #1015 ) ; +#3687 = ADVANCED_FACE ( 'NONE', ( #2024 ), #1870, .F. ) ; +#3688 = ORIENTED_EDGE ( 'NONE', *, *, #3945, .F. ) ; +#3689 = CARTESIAN_POINT ( 'NONE', ( 8.500000000000001800, 7.499997531949971700, -7.834640608427721800 ) ) ; +#3690 = CARTESIAN_POINT ( 'NONE', ( -13.14820640982125800, 8.547972557554423600, 14.92005839043202900 ) ) ; +#3691 = CARTESIAN_POINT ( 'NONE', ( 7.485673758810803800, 8.319055903027427600, -9.183754981252416600 ) ) ; +#3692 = FACE_OUTER_BOUND ( 'NONE', #293, .T. ) ; +#3693 = EDGE_CURVE ( 'NONE', #1542, #339, #1917, .T. ) ; +#3694 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.653907044767092300E-016, -1.000000000000000000 ) ) ; +#3695 = CARTESIAN_POINT ( 'NONE', ( -13.37689272740096100, 7.637598267721021000, 14.86241603066822500 ) ) ; +#3696 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 2.281796137159581800, -12.94070894874711200 ) ) ; +#3697 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1438, #1886, #3363, #3957, #1051, #1320, #764, #960, #3922, #691, #485, #3353 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0002349126509585221800, 0.0004698253019170443700, 0.0009396506038340899200, 0.001409475905751135400, 0.001879301207668181200 ), + .UNSPECIFIED. ) ; +#3698 = LINE ( 'NONE', #2592, #218 ) ; +#3699 = EDGE_CURVE ( 'NONE', #1940, #3978, #1932, .T. ) ; +#3700 = CARTESIAN_POINT ( 'NONE', ( 19.49916709456819000, 8.463630720585412000, 13.42183685325818500 ) ) ; +#3701 = AXIS2_PLACEMENT_3D ( 'NONE', #4167, #360, #4102 ) ; +#3702 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000003600, 2.499997531949971200, -7.834640608427721800 ) ) ; +#3703 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -14.13176217742977400, -11.35960056912458200 ) ) ; +#3704 = CARTESIAN_POINT ( 'NONE', ( -13.14820640982125100, 7.579955907957385700, 13.95204174083499300 ) ) ; +#3705 = CARTESIAN_POINT ( 'NONE', ( 7.512642903905679700, 7.228837939315802400, -9.041959303544558700 ) ) ; +#3706 = AXIS2_PLACEMENT_3D ( 'NONE', #123, #114, #109 ) ; +#3707 = FACE_OUTER_BOUND ( 'NONE', #2884, .T. ) ; +#3708 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3709 = CARTESIAN_POINT ( 'NONE', ( -2.115607587768825800, 8.054510599741211900, -9.788036085773889300 ) ) ; +#3710 = ADVANCED_FACE ( 'NONE', ( #1771 ), #2134, .T. ) ; +#3711 = CARTESIAN_POINT ( 'NONE', ( -0.6698729810778008000, 4.999997531949977900, -14.99998323356054700 ) ) ; +#3712 = CARTESIAN_POINT ( 'NONE', ( 19.67592244086764500, 8.699512850704046200, 13.80050144768537600 ) ) ; +#3713 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -11.63176217742977400, -1.446751736521832800E-015 ) ) ; +#3714 = CARTESIAN_POINT ( 'NONE', ( 8.590531499570349900, 7.331147264602514600, -9.251729655751193000 ) ) ; +#3715 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 9.999997531949969000, 12.50001676643944900 ) ) ; +#3716 = CARTESIAN_POINT ( 'NONE', ( -13.30553915567273800, 8.576608377492815900, 14.87233202386821100 ) ) ; +#3717 = CARTESIAN_POINT ( 'NONE', ( 7.448554219168928900, 8.283211896010058700, -9.324898156817031500 ) ) ; +#3718 = EDGE_CURVE ( 'NONE', #1281, #3153, #1716, .T. ) ; +#3719 = ORIENTED_EDGE ( 'NONE', *, *, #1043, .T. ) ; +#3720 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.223092916832912100, -7.643662237486944700 ) ) ; +#3721 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3722 = CARTESIAN_POINT ( 'NONE', ( -1.455985634830069900, 6.987834546981276600, -9.999983233560549000 ) ) ; +#3723 = VERTEX_POINT ( 'NONE', #415 ) ; +#3724 = EDGE_CURVE ( 'NONE', #604, #1999, #1562, .T. ) ; +#3725 = ORIENTED_EDGE ( 'NONE', *, *, #3732, .F. ) ; +#3726 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 7.499997531949969000, 14.00001676643945100 ) ) ; +#3727 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 7.499997531949971700, -4.999983233560546300 ) ) ; +#3728 = ORIENTED_EDGE ( 'NONE', *, *, #18, .T. ) ; +#3729 = CARTESIAN_POINT ( 'NONE', ( -13.56889891408287400, 7.714472307385677600, 14.78554199100392600 ) ) ; +#3730 = PLANE ( 'NONE', #1375 ) ; +#3731 = CARTESIAN_POINT ( 'NONE', ( 7.492518792979499400, 7.080826669809395600, -9.199169890012440100 ) ) ; +#3732 = EDGE_CURVE ( 'NONE', #1890, #3369, #1608, .T. ) ; +#3733 = EDGE_LOOP ( 'NONE', ( #1391, #3851, #3856, #3901 ) ) ; +#3734 = ADVANCED_FACE ( 'NONE', ( #1409 ), #1172, .T. ) ; +#3735 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3736 = ORIENTED_EDGE ( 'NONE', *, *, #3286, .F. ) ; +#3737 = CARTESIAN_POINT ( 'NONE', ( 3.835680318241070800, -14.13176217742977400, -5.922267902273443200 ) ) ; +#3738 = CARTESIAN_POINT ( 'NONE', ( 8.612640243994018600, 7.305953429237789900, -9.604106004159056900 ) ) ; +#3739 = ORIENTED_EDGE ( 'NONE', *, *, #941, .T. ) ; +#3740 = CIRCLE ( 'NONE', #3253, 1.000000000000000200 ) ; +#3741 = ORIENTED_EDGE ( 'NONE', *, *, #757, .F. ) ; +#3742 = EDGE_LOOP ( 'NONE', ( #2480, #290, #837, #4029, #1935, #4142, #3459, #1394 ) ) ; +#3743 = VERTEX_POINT ( 'NONE', #372 ) ; +#3744 = CARTESIAN_POINT ( 'NONE', ( -13.30553915567285000, 7.627682274521250200, 13.92340592089669300 ) ) ; +#3745 = CARTESIAN_POINT ( 'NONE', ( 8.500000000000001800, 8.385741033500860200, -8.999983233560554300 ) ) ; +#3746 = ORIENTED_EDGE ( 'NONE', *, *, #703, .F. ) ; +#3747 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #807, #946, ( #4170 ) ) ; +#3748 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3749 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000004400, 12.49999753194997300, 7.500016766439451900 ) ) ; +#3750 = ORIENTED_EDGE ( 'NONE', *, *, #3020, .T. ) ; +#3751 = CARTESIAN_POINT ( 'NONE', ( -13.60787800615270800, 8.651748088873262100, 14.74709917156711800 ) ) ; +#3752 = PERSON_AND_ORGANIZATION ( #1256, #2848 ) ; +#3753 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -6.087887087724744200, -9.342762761780534200 ) ) ; +#3754 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 0.0000000000000000000, 15.00001676643945100 ) ) ; +#3755 = CARTESIAN_POINT ( 'NONE', ( 7.422535031254076500, 8.267668457631238300, -9.392687593588689800 ) ) ; +#3756 = VECTOR ( 'NONE', #1207, 1000.000000000000000 ) ; +#3757 = EDGE_CURVE ( 'NONE', #1081, #1960, #1356, .T. ) ; +#3758 = CARTESIAN_POINT ( 'NONE', ( 3.999999996535533500, -14.13176217742977400, -9.096394603485251200 ) ) ; +#3759 = ADVANCED_FACE ( 'NONE', ( #1301 ), #436, .T. ) ; +#3760 = EDGE_CURVE ( 'NONE', #1233, #1063, #3946, .T. ) ; +#3761 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#3762 = CARTESIAN_POINT ( 'NONE', ( 19.49916709456819000, 9.078177445131233400, 14.03638357780400600 ) ) ; +#3763 = FACE_OUTER_BOUND ( 'NONE', #3742, .T. ) ; +#3764 = AXIS2_PLACEMENT_3D ( 'NONE', #1508, #2384, #1808 ) ; +#3765 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122082400, -0.1736481776669296100 ) ) ; +#3766 = CARTESIAN_POINT ( 'NONE', ( 6.500000000000002700, 12.49999753194997600, -9.999983233560549000 ) ) ; +#3767 = CARTESIAN_POINT ( 'NONE', ( 5.100901311310704700, -14.13176217742977200, -9.045603327920369800 ) ) ; +#3768 = CARTESIAN_POINT ( 'NONE', ( 7.478468122964786200, 7.014637663133774100, -9.256461772953210600 ) ) ; +#3769 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2300, #2433, #2110, #2067, #2047, #2030, #2018, #2003 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.003178150962235178500, 0.004767226443352768000, 0.006356301924470357000 ), + .UNSPECIFIED. ) ; +#3770 = AXIS2_PLACEMENT_3D ( 'NONE', #715, #475, #505 ) ; +#3771 = CARTESIAN_POINT ( 'NONE', ( 2.231471299302880700, 3.017996419360647200, -15.09560685253280500 ) ) ; +#3772 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.499997531949972100, -15.44080068533170500 ) ) ; +#3773 = CARTESIAN_POINT ( 'NONE', ( 19.68446597589033000, 8.740950093105073600, 13.25544522974625400 ) ) ; +#3774 = CARTESIAN_POINT ( 'NONE', ( 4.817836919706072000, -12.73746991014457400, -6.923907535601866700 ) ) ; +#3775 = VERTEX_POINT ( 'NONE', #3749 ) ; +#3776 = CYLINDRICAL_SURFACE ( 'NONE', #423, 5.000000000000000000 ) ; +#3777 = ADVANCED_FACE ( 'NONE', ( #1204 ), #1481, .T. ) ; +#3778 = EDGE_LOOP ( 'NONE', ( #3688, #3411, #3631, #3359, #2116, #3472 ) ) ; +#3779 = CARTESIAN_POINT ( 'NONE', ( 3.931551140011714000, -14.13176217742977400, -7.508838993436806500 ) ) ; +#3780 = ORIENTED_EDGE ( 'NONE', *, *, #289, .T. ) ; +#3781 = EDGE_CURVE ( 'NONE', #2664, #3888, #1828, .T. ) ; +#3782 = FACE_OUTER_BOUND ( 'NONE', #2655, .T. ) ; +#3783 = ORIENTED_EDGE ( 'NONE', *, *, #336, .T. ) ; +#3784 = CARTESIAN_POINT ( 'NONE', ( -13.90751515912729800, 7.898443762042672800, 14.60157053634656400 ) ) ; +#3785 = CARTESIAN_POINT ( 'NONE', ( 7.366025403784444600, 7.499997531949974300, 7.000016766439450100 ) ) ; +#3786 = EDGE_CURVE ( 'NONE', #3574, #1960, #1097, .T. ) ; +#3787 = ORIENTED_EDGE ( 'NONE', *, *, #2865, .F. ) ; +#3788 = VERTEX_POINT ( 'NONE', #700 ) ; +#3789 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999997300, 8.499997531949972500, -7.834640608427721800 ) ) ; +#3790 = CARTESIAN_POINT ( 'NONE', ( 19.80124951836964800, 8.955974495211993500, 13.54403980317670200 ) ) ; +#3791 = CARTESIAN_POINT ( 'NONE', ( 1.250000000000000700, -6.631762177429775000, 14.00001676643945100 ) ) ; +#3792 = EDGE_LOOP ( 'NONE', ( #3221, #3617, #2362 ) ) ; +#3793 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000400, 12.49999753194997600, -14.99998323356054700 ) ) ; +#3794 = EDGE_CURVE ( 'NONE', #89, #3174, #1048, .T. ) ; +#3795 = ORIENTED_EDGE ( 'NONE', *, *, #18, .F. ) ; +#3796 = ORIENTED_EDGE ( 'NONE', *, *, #1101, .F. ) ; +#3797 = AXIS2_PLACEMENT_3D ( 'NONE', #4030, #4026, #4017 ) ; +#3798 = DIRECTION ( 'NONE', ( 9.912705577010326800E-017, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#3799 = CARTESIAN_POINT ( 'NONE', ( -13.60787800615259800, 7.752915126822253800, 13.84826620951606400 ) ) ; +#3800 = CARTESIAN_POINT ( 'NONE', ( 8.600300673145397900, 7.300222986858354800, -9.766811496017629300 ) ) ; +#3801 = EDGE_LOOP ( 'NONE', ( #3989, #31, #1928, #1944, #2044, #2103, #2199, #2254, #2308, #2367 ) ) ; +#3802 = ORIENTED_EDGE ( 'NONE', *, *, #42, .F. ) ; +#3803 = EDGE_LOOP ( 'NONE', ( #4080, #1954, #2004, #3106 ) ) ; +#3804 = AXIS2_PLACEMENT_3D ( 'NONE', #3720, #3708, #3694 ) ; +#3805 = CARTESIAN_POINT ( 'NONE', ( 7.075049185077285900, 8.465823264842848400, 7.322726534781867100 ) ) ; +#3806 = ADVANCED_FACE ( 'NONE', ( #854 ), #752, .F. ) ; +#3807 = VECTOR ( 'NONE', #168, 1000.000000000000000 ) ; +#3808 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3809 = CARTESIAN_POINT ( 'NONE', ( 19.68446597589041100, 9.244569068643164300, 13.75906420528414600 ) ) ; +#3810 = CARTESIAN_POINT ( 'NONE', ( -13.75287669307822500, 8.698250136502061000, 14.66959575885283100 ) ) ; +#3811 = CIRCLE ( 'NONE', #2681, 25.00000000000000000 ) ; +#3812 = CARTESIAN_POINT ( 'NONE', ( 7.389277050839964100, 8.247747006236144400, -9.457352151229187600 ) ) ; +#3813 = EDGE_CURVE ( 'NONE', #377, #4097, #801, .T. ) ; +#3814 = CARTESIAN_POINT ( 'NONE', ( -0.01277841427387522500, 2.857238143957334200, -15.09560685253280500 ) ) ; +#3815 = CARTESIAN_POINT ( 'NONE', ( 6.674365629911511300, 8.420082917350017100, 7.488554237000064600 ) ) ; +#3816 = CIRCLE ( 'NONE', #1388, 1.200000000000011700 ) ; +#3817 = EDGE_CURVE ( 'NONE', #3174, #1449, #3186, .T. ) ; +#3818 = CARTESIAN_POINT ( 'NONE', ( 4.989410246629777400, -13.31481579071599200, -11.99096153157101200 ) ) ; +#3819 = CARTESIAN_POINT ( 'NONE', ( 19.93493168666612500, 9.345627808969414500, 12.89263860022791300 ) ) ; +#3820 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1199, #1252, #1262, #1168, #1157, #1143, #1123, #1107 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 1.612591003482639200E-020, 0.003200902847304219200, 0.004801354270956329300, 0.006401805694608438500 ), + .UNSPECIFIED. ) ; +#3821 = AXIS2_PLACEMENT_3D ( 'NONE', #3622, #1822, #3838 ) ; +#3822 = CARTESIAN_POINT ( 'NONE', ( -0.004261287087901650300, 2.738335647649359700, -15.12600714388319800 ) ) ; +#3823 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999800, 7.499997531949976100, -14.99998323356054700 ) ) ; +#3824 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #3998, #4004, #3965, #3955 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.712388980384689700, 6.283185307179586200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#3825 = ADVANCED_FACE ( 'NONE', ( #995 ), #2391, .T. ) ; +#3826 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000400, 7.499997531949970800, -5.782414440845581200E-016 ) ) ; +#3827 = CARTESIAN_POINT ( 'NONE', ( 7.469852177309274300, 6.961654659354669800, -9.300687349425583500 ) ) ; +#3828 = AXIS2_PLACEMENT_3D ( 'NONE', #3038, #3684, #4122 ) ; +#3829 = LINE ( 'NONE', #3346, #3250 ) ; +#3830 = CC_DESIGN_APPROVAL ( #3959, ( #4170 ) ) ; +#3831 = CARTESIAN_POINT ( 'NONE', ( 0.4499999999999975700, 2.714006590401295300, 13.40001676643945100 ) ) ; +#3832 = CARTESIAN_POINT ( 'NONE', ( -4.512050708351584800, 7.499997531949970800, -8.542167081316577500 ) ) ; +#3833 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3834 = ORIENTED_EDGE ( 'NONE', *, *, #3945, .T. ) ; +#3835 = ORIENTED_EDGE ( 'NONE', *, *, #1984, .F. ) ; +#3836 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999994700, 7.499997531949969900, 6.500016766439451000 ) ) ; +#3837 = ORIENTED_EDGE ( 'NONE', *, *, #2952, .F. ) ; +#3838 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3839 = EDGE_CURVE ( 'NONE', #377, #3058, #697, .T. ) ; +#3840 = CIRCLE ( 'NONE', #3030, 1.000000000000000900 ) ; +#3841 = ORIENTED_EDGE ( 'NONE', *, *, #840, .T. ) ; +#3842 = VERTEX_POINT ( 'NONE', #2854 ) ; +#3843 = ORIENTED_EDGE ( 'NONE', *, *, #3139, .F. ) ; +#3844 = CARTESIAN_POINT ( 'NONE', ( -3.557101047009265200, 7.287276781320978900, -9.926844090264285800 ) ) ; +#3845 = EDGE_CURVE ( 'NONE', #1376, #469, #1611, .T. ) ; +#3846 = FACE_OUTER_BOUND ( 'NONE', #2558, .T. ) ; +#3847 = ADVANCED_FACE ( 'NONE', ( #549 ), #861, .T. ) ; +#3848 = EDGE_LOOP ( 'NONE', ( #4031, #4083, #4139, #1623 ) ) ; +#3849 = VERTEX_POINT ( 'NONE', #2700 ) ; +#3850 = CARTESIAN_POINT ( 'NONE', ( 1.249999999999987800, 2.737752125784161700, 15.00001676643945100 ) ) ; +#3851 = ORIENTED_EDGE ( 'NONE', *, *, #2581, .F. ) ; +#3852 = ORIENTED_EDGE ( 'NONE', *, *, #4087, .T. ) ; +#3853 = VERTEX_POINT ( 'NONE', #2440 ) ; +#3854 = CARTESIAN_POINT ( 'NONE', ( -14.05388842466224600, 8.003105359582699300, 14.49690893880712000 ) ) ; +#3855 = CARTESIAN_POINT ( 'NONE', ( -3.498506681322632400, 7.391593752587894500, -8.870153241977300600 ) ) ; +#3856 = ORIENTED_EDGE ( 'NONE', *, *, #1485, .F. ) ; +#3857 = AXIS2_PLACEMENT_3D ( 'NONE', #1385, #2800, #1447 ) ; +#3858 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#3859 = CARTESIAN_POINT ( 'NONE', ( -1.631869188944567100, 6.714409161062627100, -10.60038814472224200 ) ) ; +#3860 = TOROIDAL_SURFACE ( 'NONE', #2037, 6.000000000000000000, 1.000000000000000000 ) ; +#3861 = CARTESIAN_POINT ( 'NONE', ( 19.96016900714752400, 9.470211946471803100, 13.02980235191828700 ) ) ; +#3862 = PLANE ( 'NONE', #3023 ) ; +#3863 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3864 = EDGE_CURVE ( 'NONE', #1854, #2607, #591, .T. ) ; +#3865 = CARTESIAN_POINT ( 'NONE', ( -1.886662947376935400, 6.717980891882690200, -10.67636336464067000 ) ) ; +#3866 = EDGE_CURVE ( 'NONE', #3743, #4145, #457, .T. ) ; +#3867 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 7.499997531949969900, 7.500016766439451900 ) ) ; +#3868 = EDGE_CURVE ( 'NONE', #1366, #1880, #313, .T. ) ; +#3869 = CARTESIAN_POINT ( 'NONE', ( 19.93493168666604400, 9.607375698161503100, 13.15438648942019900 ) ) ; +#3870 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1832, #1742, #1725 ), + ( #1722, #1715, #1711 ), + ( #1701, #1679, #1675 ), + ( #1661, #1656, #1652 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 2.168404344971008900E-019, 0.0005727473048052241100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7149077045844127700, 1.000000000000000000), + ( 1.000000000000000000, 0.7139929201054278100, 1.000000000000000000), + ( 1.000000000000000000, 0.7128523067122827200, 1.000000000000000000), + ( 1.000000000000000000, 0.7114797383807706100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3871 = AXIS2_PLACEMENT_3D ( 'NONE', #734, #3025, #2369 ) ; +#3872 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3873 = CARTESIAN_POINT ( 'NONE', ( -13.75287669307833700, 7.830418539536662300, 13.80176416188745500 ) ) ; +#3874 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3875 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.499997531949972100, -15.18694403236027300 ) ) ; +#3876 = EDGE_LOOP ( 'NONE', ( #1585, #1642, #2359, #2477, #2656, #2845 ) ) ; +#3877 = VECTOR ( 'NONE', #3872, 1000.000000000000000 ) ; +#3878 = AXIS2_PLACEMENT_3D ( 'NONE', #3468, #3445, #3343 ) ; +#3879 = ORIENTED_EDGE ( 'NONE', *, *, #751, .F. ) ; +#3880 = ORIENTED_EDGE ( 'NONE', *, *, #1923, .F. ) ; +#3881 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, 13.36823782257022600, -3.277205641478951700 ) ) ; +#3882 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.146386871659069100E-032, 9.912705577010326800E-017 ) ) ; +#3883 = VERTEX_POINT ( 'NONE', #2361 ) ; +#3884 = CARTESIAN_POINT ( 'NONE', ( 8.499497820558046300, 7.396115831113359500, -8.848791665587162600 ) ) ; +#3885 = FACE_OUTER_BOUND ( 'NONE', #3092, .T. ) ; +#3886 = ORIENTED_EDGE ( 'NONE', *, *, #3282, .F. ) ; +#3887 = CARTESIAN_POINT ( 'NONE', ( -14.02497447201978400, 8.807336090490242200, 14.48778583553879300 ) ) ; +#3888 = VERTEX_POINT ( 'NONE', #2189 ) ; +#3889 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, 2.281796137159581800, -12.94070894874711200 ) ) ; +#3890 = EDGE_LOOP ( 'NONE', ( #2667, #1987, #3879, #3902 ) ) ; +#3891 = CYLINDRICAL_SURFACE ( 'NONE', #3207, 1.000000000000000900 ) ; +#3892 = ORIENTED_EDGE ( 'NONE', *, *, #3866, .F. ) ; +#3893 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3894 = CARTESIAN_POINT ( 'NONE', ( 8.565461751399945800, 7.289788760521784800, -9.914721068897828000 ) ) ; +#3895 = EDGE_CURVE ( 'NONE', #3058, #4092, #409, .T. ) ; +#3896 = ORIENTED_EDGE ( 'NONE', *, *, #757, .T. ) ; +#3897 = ORIENTED_EDGE ( 'NONE', *, *, #1923, .T. ) ; +#3898 = EDGE_LOOP ( 'NONE', ( #2684, #883, #2171, #1619, #3947, #4039, #626, #1024, #1426, #1845 ) ) ; +#3899 = CARTESIAN_POINT ( 'NONE', ( 3.982058818953086100, -14.13176217742977400, -8.567026113661299300 ) ) ; +#3900 = EDGE_CURVE ( 'NONE', #1376, #3369, #142, .T. ) ; +#3901 = ORIENTED_EDGE ( 'NONE', *, *, #2993, .F. ) ; +#3902 = ORIENTED_EDGE ( 'NONE', *, *, #2536, .T. ) ; +#3903 = ORIENTED_EDGE ( 'NONE', *, *, #4076, .T. ) ; +#3904 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3905 = DIRECTION ( 'NONE', ( 1.156482317317871500E-016, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#3906 = FACE_BOUND ( 'NONE', #2046, .T. ) ; +#3907 = CARTESIAN_POINT ( 'NONE', ( -12.49999999999999800, 9.999997531949972500, -14.99998323356054700 ) ) ; +#3908 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000001100, 9.672689304129596300, 12.69640170313162400 ) ) ; +#3909 = CYLINDRICAL_SURFACE ( 'NONE', #2523, 2.250000000000000400 ) ; +#3910 = ADVANCED_FACE ( 'NONE', ( #171 ), #1817, .F. ) ; +#3911 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3912 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3913 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, 7.499997531949976100, -14.99998323356054700 ) ) ; +#3914 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3915 = CIRCLE ( 'NONE', #1441, 1.000000000000000000 ) ; +#3916 = EDGE_CURVE ( 'NONE', #3662, #721, #3620, .T. ) ; +#3917 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3918 = CARTESIAN_POINT ( 'NONE', ( -2.750365021426049300, 6.984824325459800100, -10.08427558700167000 ) ) ; +#3919 = EDGE_CURVE ( 'NONE', #3369, #1381, #2842, .T. ) ; +#3920 = AXIS2_PLACEMENT_3D ( 'NONE', #1255, #161, #3587 ) ; +#3921 = CARTESIAN_POINT ( 'NONE', ( 5.517241379310350500, 4.714692804133611600, 15.00001676643945300 ) ) ; +#3922 = CARTESIAN_POINT ( 'NONE', ( 0.07498262473450627300, -13.52740182138057900, -11.76833675687640700 ) ) ; +#3923 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 7.597114959037287300, -10.99998323356054900 ) ) ; +#3924 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669298900, 0.9848077530122082400 ) ) ; +#3925 = ADVANCED_FACE ( 'NONE', ( #66 ), #120, .T. ) ; +#3926 = CARTESIAN_POINT ( 'NONE', ( 5.120300507534937000, 3.673109000405699200, -14.91020487250237100 ) ) ; +#3927 = ORIENTED_EDGE ( 'NONE', *, *, #1873, .F. ) ; +#3928 = LINE ( 'NONE', #565, #2870 ) ; +#3929 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -12.62837651615604200, -11.44657176888025800 ) ) ; +#3930 = CARTESIAN_POINT ( 'NONE', ( 19.99999999998941300, 9.738209351350109300, 12.76180494703954700 ) ) ; +#3931 = ORIENTED_EDGE ( 'NONE', *, *, #190, .F. ) ; +#3932 = ORIENTED_EDGE ( 'NONE', *, *, #3693, .T. ) ; +#3933 = ORIENTED_EDGE ( 'NONE', *, *, #137, .F. ) ; +#3934 = CARTESIAN_POINT ( 'NONE', ( 4.411169153452918000, 4.736985812262595600, 15.00001676643945100 ) ) ; +#3935 = LINE ( 'NONE', #4156, #1942 ) ; +#3936 = VERTEX_POINT ( 'NONE', #1347 ) ; +#3937 = ORIENTED_EDGE ( 'NONE', *, *, #2270, .F. ) ; +#3938 = EDGE_LOOP ( 'NONE', ( #2721, #2050, #2108, #2816, #3880, #3314 ) ) ; +#3939 = EDGE_CURVE ( 'NONE', #469, #1750, #267, .T. ) ; +#3940 = CLOSED_SHELL ( 'NONE', ( #3464, #2815, #3579, #151, #1730, #2060, #1641, #3007, #2703, #1804, #3948, #1688, #1969, #2925, #2973, #4112, #3123, #3450, #2494, #3777, #2634, #4228, #1781, #4054, #3964, #1658, #3429, #3656, #39, #1907, #2843, #1504, #2302, #2452, #3988, #2128, #1521, #2238, #2332, #4072, #2476, #1924, #64, #1565, #1844, #2033, #1457, #2285, #2594, #3759, #2748, #2174, #3925, #1581, #3052, #2147, #2732, #3296, #2365, #3734, #3097, #3710, #2012, #3167, #2659, #3597, #2577, #4129, #1827, #3026, #3492, #3358, #3406, #2436, #2888, #4011, #3507, #3252, #3910, #1618, #2102, #1949, #3077, #2260, #2344, #2390, #3386, #2769, #2550, #2688, #2795, #2909, #3825, #3278, #3193, #3687, #3806, #4096, #2190, #111, #4027, #2408, #1478, #1433, #3641, #1605, #4154, #1759, #1713, #3341, #3143, #2614, #2956, #1990, #3321, #2086, #3847, #3614 ) ) ; +#3941 = ORIENTED_EDGE ( 'NONE', *, *, #3718, .T. ) ; +#3942 = CARTESIAN_POINT ( 'NONE', ( -0.01277841427387522500, 2.857238143957334200, -15.09560685253280500 ) ) ; +#3943 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000001100, 9.803612595257750000, 12.82732499425964800 ) ) ; +#3944 = ORIENTED_EDGE ( 'NONE', *, *, #3966, .T. ) ; +#3945 = EDGE_CURVE ( 'NONE', #1999, #3607, #28, .T. ) ; +#3946 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #320, #1466, #1408, #2098 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.470329472543003400E-021, 0.0004005578544675279400 ), + .UNSPECIFIED. ) ; +#3947 = ORIENTED_EDGE ( 'NONE', *, *, #729, .F. ) ; +#3948 = ADVANCED_FACE ( 'NONE', ( #2505 ), #659, .F. ) ; +#3949 = VERTEX_POINT ( 'NONE', #1059 ) ; +#3950 = CARTESIAN_POINT ( 'NONE', ( -14.41147321350086900, 8.344395373611066100, 14.15561892477835200 ) ) ; +#3951 = CARTESIAN_POINT ( 'NONE', ( 5.593676694414545700, 2.945303783441194100, 15.00001676643965000 ) ) ; +#3952 = EDGE_CURVE ( 'NONE', #1381, #426, #2073, .T. ) ; +#3953 = AXIS2_PLACEMENT_3D ( 'NONE', #3702, #1695, #3665 ) ; +#3954 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#3955 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, 2.499997531949969900, 12.50001676643945100 ) ) ; +#3956 = AXIS2_PLACEMENT_3D ( 'NONE', #411, #2561, #2356 ) ; +#3957 = CARTESIAN_POINT ( 'NONE', ( 0.6909799242800412900, -14.08601934758623900, -11.38245155246453200 ) ) ; +#3958 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000001100, 9.999997531949969000, 12.50001676643944900 ) ) ; +#3959 = APPROVAL ( #974, 'UNSPECIFIED' ) ; +#3960 = FACE_OUTER_BOUND ( 'NONE', #964, .T. ) ; +#3961 = CARTESIAN_POINT ( 'NONE', ( -14.15206688216540500, 8.116530508182638200, 13.63009698069981600 ) ) ; +#3962 = CARTESIAN_POINT ( 'NONE', ( 5.750000003448562300, 2.584595997973949000, 15.00001676643944900 ) ) ; +#3963 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#3964 = ADVANCED_FACE ( 'NONE', ( #2151 ), #1003, .T. ) ; +#3965 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000002200, 5.428929720084492600, 12.50001676643944900 ) ) ; +#3966 = EDGE_CURVE ( 'NONE', #4097, #4092, #2598, .T. ) ; +#3967 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -5.711846095760983600, -9.273070689112938000 ) ) ; +#3968 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000001100, 9.999997531949969000, 12.50001676643944900 ) ) ; +#3969 = EDGE_CURVE ( 'NONE', #2548, #3978, #1837, .T. ) ; +#3970 = AXIS2_PLACEMENT_3D ( 'NONE', #603, #2903, #930 ) ; +#3971 = VERTEX_POINT ( 'NONE', #788 ) ; +#3972 = LINE ( 'NONE', #3155, #3093 ) ; +#3973 = ORIENTED_EDGE ( 'NONE', *, *, #4085, .F. ) ; +#3974 = ORIENTED_EDGE ( 'NONE', *, *, #664, .T. ) ; +#3975 = AXIS2_PLACEMENT_3D ( 'NONE', #86, #1247, #2343 ) ; +#3976 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3977 = CARTESIAN_POINT ( 'NONE', ( 8.355120137861337800, 7.499997531949970800, -3.629765653493461000 ) ) ; +#3978 = VERTEX_POINT ( 'NONE', #634 ) ; +#3979 = CARTESIAN_POINT ( 'NONE', ( 1.249999999999985600, -6.631762177429776800, 7.500016766439451900 ) ) ; +#3980 = FACE_OUTER_BOUND ( 'NONE', #300, .T. ) ; +#3981 = VERTEX_POINT ( 'NONE', #655 ) ; +#3982 = CARTESIAN_POINT ( 'NONE', ( 1.029526447889971100E-015, 3.382781095964635400, -15.28514212486994200 ) ) ; +#3983 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3984 = ORIENTED_EDGE ( 'NONE', *, *, #3630, .T. ) ; +#3985 = ORIENTED_EDGE ( 'NONE', *, *, #1958, .T. ) ; +#3986 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000004400, 8.499997531949970800, 6.500016766439445700 ) ) ; +#3987 = ORIENTED_EDGE ( 'NONE', *, *, #1101, .T. ) ; +#3988 = ADVANCED_FACE ( 'NONE', ( #1981 ), #3776, .F. ) ; +#3989 = ORIENTED_EDGE ( 'NONE', *, *, #3605, .T. ) ; +#3990 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3991 = VERTEX_POINT ( 'NONE', #554 ) ; +#3992 = ORIENTED_EDGE ( 'NONE', *, *, #1188, .F. ) ; +#3993 = EDGE_CURVE ( 'NONE', #2281, #3883, #3928, .T. ) ; +#3994 = ORIENTED_EDGE ( 'NONE', *, *, #963, .T. ) ; +#3995 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 7.499997531949970800, 8.673614525627818800E-016 ) ) ; +#3996 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3997 = ORIENTED_EDGE ( 'NONE', *, *, #3845, .T. ) ; +#3998 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 7.499997531949969900, 7.500016766439451900 ) ) ; +#3999 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #245, #3515, #3467, #3453 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0004787288187531290300 ), + .UNSPECIFIED. ) ; +#4000 = CARTESIAN_POINT ( 'NONE', ( -0.2284811990704739300, 4.235484539469908300, -15.13478750123694600 ) ) ; +#4001 = CARTESIAN_POINT ( 'NONE', ( 8.498506681328535700, 7.391593752587547300, -8.870153241978941900 ) ) ; +#4002 = EDGE_CURVE ( 'NONE', #3299, #3971, #3410, .T. ) ; +#4003 = CIRCLE ( 'NONE', #1860, 2.250000000000000400 ) ; +#4004 = CARTESIAN_POINT ( 'NONE', ( 5.753048327204942000, 7.499997531949968100, 10.42894895457397400 ) ) ; +#4005 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 7.499997531949971700, -7.834640608427721800 ) ) ; +#4006 = CARTESIAN_POINT ( 'NONE', ( -14.49916709456827800, 9.078177445131231600, 14.03638357780390500 ) ) ; +#4007 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 2.499997531949972100, -15.44080068533170500 ) ) ; +#4008 = EDGE_CURVE ( 'NONE', #469, #772, #1300, .T. ) ; +#4009 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4010 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 7.499997531949971700, -8.189983233560539600 ) ) ; +#4011 = ADVANCED_FACE ( 'NONE', ( #2407 ), #3204, .T. ) ; +#4012 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#4013 = AXIS2_PLACEMENT_3D ( 'NONE', #2336, #1626, #1403 ) ; +#4014 = CARTESIAN_POINT ( 'NONE', ( 4.316015256998449300, -14.09261725937369600, -11.37778392996835700 ) ) ; +#4015 = FACE_OUTER_BOUND ( 'NONE', #1422, .T. ) ; +#4016 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#4017 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.603123764006152800E-014, -1.000000000000000000 ) ) ; +#4018 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#4019 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4020 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, -5.711846095760983600, -9.273070689112938000 ) ) ; +#4021 = CARTESIAN_POINT ( 'NONE', ( 12.45000000000001900, 9.099997531949975700, -4.999983233560546300 ) ) ; +#4022 = EDGE_CURVE ( 'NONE', #3299, #875, #1620, .T. ) ; +#4023 = CIRCLE ( 'NONE', #397, 3.189999999999994200 ) ; +#4024 = CARTESIAN_POINT ( 'NONE', ( 7.271317018327818200, 6.752967993097575700, -10.56332359009122100 ) ) ; +#4025 = CARTESIAN_POINT ( 'NONE', ( -1.631869188944567100, 6.714409161062627100, -10.60038814472224200 ) ) ; +#4026 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4027 = ADVANCED_FACE ( 'NONE', ( #1312 ), #553, .T. ) ; +#4028 = EDGE_CURVE ( 'NONE', #875, #1317, #4023, .T. ) ; +#4029 = ORIENTED_EDGE ( 'NONE', *, *, #1682, .T. ) ; +#4030 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -5.711846095760983600, -9.273070689112938000 ) ) ; +#4031 = ORIENTED_EDGE ( 'NONE', *, *, #4106, .F. ) ; +#4032 = ORIENTED_EDGE ( 'NONE', *, *, #3993, .T. ) ; +#4033 = CIRCLE ( 'NONE', #3180, 2.250000000000000000 ) ; +#4034 = AXIS2_PLACEMENT_3D ( 'NONE', #3557, #3234, #1561 ) ; +#4035 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4036 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999997300, 8.499997531949972500, -7.834640608427721800 ) ) ; +#4037 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4038 = VERTEX_POINT ( 'NONE', #243 ) ; +#4039 = ORIENTED_EDGE ( 'NONE', *, *, #756, .T. ) ; +#4040 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4041 = CARTESIAN_POINT ( 'NONE', ( 8.138085476252696200, 7.140393453232857900, -10.53441666786131000 ) ) ; +#4042 = ORIENTED_EDGE ( 'NONE', *, *, #1903, .T. ) ; +#4043 = CARTESIAN_POINT ( 'NONE', ( 5.055776229144529800, 3.244746686838860100, -15.00376507616815400 ) ) ; +#4044 = DIRECTION ( 'NONE', ( 4.956352788505163400E-017, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#4045 = ORIENTED_EDGE ( 'NONE', *, *, #703, .T. ) ; +#4046 = ORIENTED_EDGE ( 'NONE', *, *, #622, .T. ) ; +#4047 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 8.499997531949969000, 15.00001676643945100 ) ) ; +#4048 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -8.019335917570367400E-017, -1.000000000000000000 ) ) ; +#4049 = ORIENTED_EDGE ( 'NONE', *, *, #4085, .T. ) ; +#4050 = EDGE_CURVE ( 'NONE', #3971, #1317, #2305, .T. ) ; +#4051 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 7.499997531949971700, -6.199983233560551800 ) ) ; +#4052 = CARTESIAN_POINT ( 'NONE', ( 5.181254475239481600, -14.13176217742977400, -8.496299571669684500 ) ) ; +#4053 = CARTESIAN_POINT ( 'NONE', ( -1.330577219650749700, 6.722405042072610500, -10.51298987418336000 ) ) ; +#4054 = ADVANCED_FACE ( 'NONE', ( #3660 ), #2862, .T. ) ; +#4055 = FACE_OUTER_BOUND ( 'NONE', #2786, .T. ) ; +#4056 = EDGE_CURVE ( 'NONE', #3680, #2519, #4119, .T. ) ; +#4057 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 12.49999753194997600, -3.799983233560540400 ) ) ; +#4058 = CARTESIAN_POINT ( 'NONE', ( 8.499497125266268300, 7.396112664721231400, -8.848806623117623000 ) ) ; +#4059 = AXIS2_PLACEMENT_3D ( 'NONE', #2240, #3912, #2670 ) ; +#4060 = CARTESIAN_POINT ( 'NONE', ( -14.67592244086841900, 8.699512850704229200, 13.80050144768519300 ) ) ; +#4061 = PLANE ( 'NONE', #1415 ) ; +#4062 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, 2.499997531949969000, 12.50001676643944900 ) ) ; +#4063 = AXIS2_PLACEMENT_3D ( 'NONE', #579, #1212, #2535 ) ; +#4064 = FACE_OUTER_BOUND ( 'NONE', #53, .T. ) ; +#4065 = CARTESIAN_POINT ( 'NONE', ( 1.250000000000000700, 0.0000000000000000000, 15.00001676643945100 ) ) ; +#4066 = CARTESIAN_POINT ( 'NONE', ( -14.49916709456827800, 8.463630720585513200, 13.42183685325818700 ) ) ; +#4067 = CARTESIAN_POINT ( 'NONE', ( -1.175210994631166600, 7.040985457330476600, -9.999983233560550700 ) ) ; +#4068 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000004400, 12.49999753194997300, 6.500016766439447500 ) ) ; +#4069 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#4070 = PLANE ( 'NONE', #1509 ) ; +#4071 = ORIENTED_EDGE ( 'NONE', *, *, #2865, .T. ) ; +#4072 = ADVANCED_FACE ( 'NONE', ( #3559 ), #3304, .F. ) ; +#4073 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -5.006327233685850000, -16.76436826747344400 ) ) ; +#4074 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 8.019335917570373600E-017 ) ) ; +#4075 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3645, #2729, #3391, #3003 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0003257081080810997000 ), + .UNSPECIFIED. ) ; +#4076 = EDGE_CURVE ( 'NONE', #3743, #2399, #3352, .T. ) ; +#4077 = VECTOR ( 'NONE', #712, 1000.000000000000000 ) ; +#4078 = CARTESIAN_POINT ( 'NONE', ( -3.134581939338894500, 7.568339933465176200, -4.299993086179434900 ) ) ; +#4079 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996000, 7.499997531949971700, -6.616646463797430000 ) ) ; +#4080 = ORIENTED_EDGE ( 'NONE', *, *, #4094, .F. ) ; +#4081 = EDGE_CURVE ( 'NONE', #3663, #1750, #4075, .T. ) ; +#4082 = CARTESIAN_POINT ( 'NONE', ( 7.750365021426044400, 6.984824325459794800, -10.08427558700168100 ) ) ; +#4083 = ORIENTED_EDGE ( 'NONE', *, *, #4128, .T. ) ; +#4084 = CARTESIAN_POINT ( 'NONE', ( 4.876792049993627900, -12.80070268509894000, -7.454485443629755200 ) ) ; +#4085 = EDGE_CURVE ( 'NONE', #882, #1081, #3829, .T. ) ; +#4086 = VERTEX_POINT ( 'NONE', #3612 ) ; +#4087 = EDGE_CURVE ( 'NONE', #2056, #3663, #3972, .T. ) ; +#4088 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 7.499997531949970800, 8.673614525627818800E-016 ) ) ; +#4089 = ORIENTED_EDGE ( 'NONE', *, *, #3939, .F. ) ; +#4090 = CARTESIAN_POINT ( 'NONE', ( -14.68446597589039700, 9.244569068643164300, 13.75906420528414700 ) ) ; +#4091 = VERTEX_POINT ( 'NONE', #2965 ) ; +#4092 = VERTEX_POINT ( 'NONE', #2895 ) ; +#4093 = ORIENTED_EDGE ( 'NONE', *, *, #887, .T. ) ; +#4094 = EDGE_CURVE ( 'NONE', #2268, #774, #3456, .T. ) ; +#4095 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000008000, -13.13176217742978700, 7.500016766439451000 ) ) ; +#4096 = ADVANCED_FACE ( 'NONE', ( #2975 ), #2457, .F. ) ; +#4097 = VERTEX_POINT ( 'NONE', #2487 ) ; +#4098 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 7.499997531949971700, -7.834640608427721800 ) ) ; +#4099 = VERTEX_POINT ( 'NONE', #532 ) ; +#4100 = CARTESIAN_POINT ( 'NONE', ( 4.000000000000000000, -14.13176217742977400, -9.626418191079084300 ) ) ; +#4101 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#4102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4103 = EDGE_CURVE ( 'NONE', #2268, #1880, #2546, .T. ) ; +#4104 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9848077530122082400, 0.1736481776669296100 ) ) ; +#4105 = CARTESIAN_POINT ( 'NONE', ( 8.143663367067588900, 7.499997531949972500, 7.627593058052566400 ) ) ; +#4106 = EDGE_CURVE ( 'NONE', #2350, #2762, #2651, .T. ) ; +#4107 = CARTESIAN_POINT ( 'NONE', ( 4.159234336588227200, -14.13176217742977400, -11.35960056912458100 ) ) ; +#4108 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4109 = CIRCLE ( 'NONE', #1577, 2.249999999999998700 ) ; +#4110 = CARTESIAN_POINT ( 'NONE', ( -14.80124951836963400, 8.955974495212238700, 13.54403980317670200 ) ) ; +#4111 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 7.430064017866318000, 8.333350099772783200 ) ) ; +#4112 = ADVANCED_FACE ( 'NONE', ( #2757 ), #1948, .F. ) ; +#4113 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4114 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4115 = EDGE_CURVE ( 'NONE', #1880, #1366, #3149, .T. ) ; +#4116 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#4117 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -13.13176217742977600, -9.626418191079084300 ) ) ; +#4118 = CARTESIAN_POINT ( 'NONE', ( 6.973191530529741800, 7.562865702398269700, 7.386999511354824600 ) ) ; +#4119 = CIRCLE ( 'NONE', #248, 1.000000000000000000 ) ; +#4120 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #451, #482, #361, #354 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001263206608316107600, 0.001712551606672901700 ), + .UNSPECIFIED. ) ; +#4121 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -14.13176217742977400, -9.626418191079084300 ) ) ; +#4122 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.156482317317872200E-016 ) ) ; +#4123 = EDGE_CURVE ( 'NONE', #1686, #98, #3308, .T. ) ; +#4124 = ORIENTED_EDGE ( 'NONE', *, *, #2985, .T. ) ; +#4125 = ORIENTED_EDGE ( 'NONE', *, *, #217, .T. ) ; +#4126 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999996900, 7.499997531949971700, -7.834640608427721800 ) ) ; +#4127 = CARTESIAN_POINT ( 'NONE', ( 6.600781985167270900, 7.570923060048468000, 7.500016761515859700 ) ) ; +#4128 = EDGE_CURVE ( 'NONE', #2350, #3004, #2517, .T. ) ; +#4129 = ADVANCED_FACE ( 'NONE', ( #2093 ), #1668, .T. ) ; +#4130 = EDGE_CURVE ( 'NONE', #774, #1366, #2198, .T. ) ; +#4131 = ORIENTED_EDGE ( 'NONE', *, *, #1316, .T. ) ; +#4132 = ORIENTED_EDGE ( 'NONE', *, *, #1485, .T. ) ; +#4133 = VECTOR ( 'NONE', #983, 1000.000000000000000 ) ; +#4134 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4135 = CARTESIAN_POINT ( 'NONE', ( 6.717179417203011500, 6.979054802252277600, -10.09865480345788000 ) ) ; +#4136 = ORIENTED_EDGE ( 'NONE', *, *, #4008, .T. ) ; +#4137 = CARTESIAN_POINT ( 'NONE', ( -14.68446597589039700, 8.740950093105270800, 13.25544522974625400 ) ) ; +#4138 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2720, #2739, #2745, #2704 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0006287512979031329200 ), + .UNSPECIFIED. ) ; +#4139 = ORIENTED_EDGE ( 'NONE', *, *, #3178, .F. ) ; +#4140 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -8.019335917570373600E-017 ) ) ; +#4141 = VERTEX_POINT ( 'NONE', #4148 ) ; +#4142 = ORIENTED_EDGE ( 'NONE', *, *, #3667, .T. ) ; +#4143 = CARTESIAN_POINT ( 'NONE', ( 4.549999999999998900, 2.499997531949969400, 13.40001676643945000 ) ) ; +#4144 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, 1.182853392398731000E-015, 14.75001676643945100 ) ) ; +#4145 = VERTEX_POINT ( 'NONE', #4126 ) ; +#4146 = ORIENTED_EDGE ( 'NONE', *, *, #2371, .F. ) ; +#4147 = ORIENTED_EDGE ( 'NONE', *, *, #1539, .F. ) ; +#4148 = CARTESIAN_POINT ( 'NONE', ( -2.115607587768825800, 8.054510599741211900, -9.788036085773889300 ) ) ; +#4149 = ORIENTED_EDGE ( 'NONE', *, *, #1733, .T. ) ; +#4150 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4151 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#4152 = CARTESIAN_POINT ( 'NONE', ( -14.93493168666602800, 9.607375698161503100, 13.15438648942020100 ) ) ; +#4153 = EDGE_CURVE ( 'NONE', #3265, #1281, #2351, .T. ) ; +#4154 = ADVANCED_FACE ( 'NONE', ( #1363 ), #1007, .T. ) ; +#4155 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -11.63176217742977200, -14.39404467726971100 ) ) ; +#4156 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, -11.63176217742977400, -3.277205641478954800 ) ) ; +#4157 = EDGE_CURVE ( 'NONE', #1693, #1230, #1110, .T. ) ; +#4158 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4159 = CARTESIAN_POINT ( 'NONE', ( -14.96016900714751500, 9.470211946471579300, 13.02980235191828700 ) ) ; +#4160 = VECTOR ( 'NONE', #3765, 1000.000000000000000 ) ; +#4161 = EDGE_CURVE ( 'NONE', #2923, #1487, #1572, .T. ) ; +#4162 = CARTESIAN_POINT ( 'NONE', ( 1.222608079021185100, 2.972356245415279700, 15.00001676643945300 ) ) ; +#4163 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000700, 12.49999753194997600, -4.999983233560546300 ) ) ; +#4164 = EDGE_CURVE ( 'NONE', #962, #1534, #1421, .T. ) ; +#4165 = CARTESIAN_POINT ( 'NONE', ( -14.93493168666602800, 9.345627808969217300, 12.89263860022791300 ) ) ; +#4166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4167 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, -5.711846095760983600, -9.273070689112938000 ) ) ; +#4168 = EDGE_CURVE ( 'NONE', #962, #2043, #913, .T. ) ; +#4169 = EDGE_LOOP ( 'NONE', ( #2711, #2727, #2819, #2835 ) ) ; +#4170 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #1885, .NOT_KNOWN. ) ; +#4171 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.559374635020934700E-016 ) ) ; +#4172 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999999600, 9.803612595257858300, 12.82732499425971400 ) ) ; +#4173 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 8.499997531949969000, 14.00001676643945100 ) ) ; +#4174 = CARTESIAN_POINT ( 'NONE', ( 8.500000000000001800, 7.400510333433296700, -8.827343183149652700 ) ) ; +#4175 = EDGE_LOOP ( 'NONE', ( #3896, #3937, #4089, #820 ) ) ; +#4176 = CARTESIAN_POINT ( 'NONE', ( 8.232050807568876700, 7.499997531949969900, 7.500016766439451900 ) ) ; +#4177 = CARTESIAN_POINT ( 'NONE', ( 7.389277050840284700, 8.247747006236588500, -9.457352151229407900 ) ) ; +#4178 = VERTEX_POINT ( 'NONE', #3675 ) ; +#4179 = EDGE_CURVE ( 'NONE', #4099, #2043, #1785, .T. ) ; +#4180 = VECTOR ( 'NONE', #4044, 1000.000000000000000 ) ; +#4181 = ORIENTED_EDGE ( 'NONE', *, *, #4081, .T. ) ; +#4182 = VERTEX_POINT ( 'NONE', #3419 ) ; +#4183 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 9.099997531949975700, -3.799983233560534600 ) ) ; +#4184 = EDGE_CURVE ( 'NONE', #1542, #3662, #711, .T. ) ; +#4185 = EDGE_CURVE ( 'NONE', #4099, #1534, #605, .T. ) ; +#4186 = EDGE_LOOP ( 'NONE', ( #241, #484, #563, #576, #614, #868, #1124 ) ) ; +#4187 = ORIENTED_EDGE ( 'NONE', *, *, #3275, .F. ) ; +#4188 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4189 = CARTESIAN_POINT ( 'NONE', ( 4.649725835341556000, -12.59668302798251100, -5.350133393925732500 ) ) ; +#4190 = CARTESIAN_POINT ( 'NONE', ( 8.136076929927407200, 7.499997531949971700, 7.638543126668138500 ) ) ; +#4191 = ORIENTED_EDGE ( 'NONE', *, *, #1843, .T. ) ; +#4192 = EDGE_CURVE ( 'NONE', #251, #2557, #1751, .T. ) ; +#4193 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4194 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#4195 = FACE_OUTER_BOUND ( 'NONE', #3307, .T. ) ; +#4196 = CARTESIAN_POINT ( 'NONE', ( 5.553067798468944700, -14.13176217742977600, -5.796611199253814700 ) ) ; +#4197 = CARTESIAN_POINT ( 'NONE', ( 7.507185563758183000, 7.399359797679095700, -8.833467685870557400 ) ) ; +#4198 = CARTESIAN_POINT ( 'NONE', ( -14.99999999999132600, 9.738209351350199900, 12.76180494703946000 ) ) ; +#4199 = CARTESIAN_POINT ( 'NONE', ( 8.022090606387957100, 7.494422915410932100, 7.758144880824321600 ) ) ; +#4200 = EDGE_CURVE ( 'NONE', #1890, #772, #987, .T. ) ; +#4201 = LINE ( 'NONE', #3889, #4160 ) ; +#4202 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 8.499997531949969000, 14.00001676643945100 ) ) ; +#4203 = CARTESIAN_POINT ( 'NONE', ( 8.500000000000001800, 7.404783783242378600, -8.805759462705083300 ) ) ; +#4204 = CARTESIAN_POINT ( 'NONE', ( 2.750000000000000400, -5.711846095760983600, -14.27307068911294000 ) ) ; +#4205 = EDGE_CURVE ( 'NONE', #1173, #3584, #815, .T. ) ; +#4206 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000700, 1.671814187836143500E-031, 15.00001676643945100 ) ) ; +#4207 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, -6.631762177429775000, 7.500016766439451900 ) ) ; +#4208 = EDGE_CURVE ( 'NONE', #884, #343, #471, .T. ) ; +#4209 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -12.96664603309569800, -12.54328693733201100 ) ) ; +#4210 = EDGE_CURVE ( 'NONE', #1635, #3743, #265, .T. ) ; +#4211 = CARTESIAN_POINT ( 'NONE', ( -0.5172413793103443100, 4.714692804133610700, 14.00001676643945100 ) ) ; +#4212 = CARTESIAN_POINT ( 'NONE', ( 7.764567368363685800, 7.479281202082455100, 7.966545615222715400 ) ) ; +#4213 = AXIS2_PLACEMENT_3D ( 'NONE', #1327, #1258, #1270 ) ; +#4214 = CARTESIAN_POINT ( 'NONE', ( 2.250000000000000000, -11.63176217742977400, -3.277205641478954800 ) ) ; +#4215 = ORIENTED_EDGE ( 'NONE', *, *, #1682, .F. ) ; +#4216 = EDGE_LOOP ( 'NONE', ( #2333, #2421, #2455, #2524 ) ) ; +#4217 = EDGE_CURVE ( 'NONE', #3529, #4091, #3769, .T. ) ; +#4218 = CARTESIAN_POINT ( 'NONE', ( -0.4290918628161988800, 4.536269609784097800, 13.93239191501725900 ) ) ; +#4219 = ORIENTED_EDGE ( 'NONE', *, *, #212, .T. ) ; +#4220 = VERTEX_POINT ( 'NONE', #2243 ) ; +#4221 = FACE_OUTER_BOUND ( 'NONE', #2113, .T. ) ; +#4222 = ORIENTED_EDGE ( 'NONE', *, *, #2371, .T. ) ; +#4223 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4224 = CARTESIAN_POINT ( 'NONE', ( 7.735985804969478100, 6.979054802252131900, -11.11746119122430800 ) ) ; +#4225 = EDGE_CURVE ( 'NONE', #3672, #2281, #2972, .T. ) ; +#4226 = EDGE_LOOP ( 'NONE', ( #2484, #3985, #3994, #4093, #4149, #976, #82 ) ) ; +#4227 = ORIENTED_EDGE ( 'NONE', *, *, #2725, .T. ) ; +#4228 = ADVANCED_FACE ( 'NONE', ( #422 ), #3538, .T. ) ; +#4229 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -13.03568385490786200, -9.073365765096003300 ) ) ; +#4230 = CARTESIAN_POINT ( 'NONE', ( 5.704811277268921900, 2.675163033472616600, 15.00001676643923800 ) ) ; +#4231 = ORIENTED_EDGE ( 'NONE', *, *, #1181, .F. ) ; +#4232 = EDGE_CURVE ( 'NONE', #3672, #1635, #2202, .T. ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STEP/Trigger_Guide.step b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Trigger_Guide.step new file mode 100644 index 0000000..d47bd8d --- /dev/null +++ b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Trigger_Guide.step @@ -0,0 +1,3300 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Trigger_Guide.STEP', + '2013-11-10T07:43:56', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -2.500000000000003100, 4.999999999999999100 ) ) ; +#2 = CARTESIAN_POINT ( 'NONE', ( 5.750090492854758000, -0.5721190838646718100, 3.408373419045408700 ) ) ; +#3 = EDGE_CURVE ( 'NONE', #575, #1624, #235, .T. ) ; +#4 = CARTESIAN_POINT ( 'NONE', ( -6.250000030916516500, -0.7006773030552938500, 3.602287001109244300 ) ) ; +#5 = AXIS2_PLACEMENT_3D ( 'NONE', #1469, #1439, #2489 ) ; +#6 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.6863786727459847400, 3.634190658881699200 ) ) ; +#7 = CARTESIAN_POINT ( 'NONE', ( 6.290013069862632200, -0.1186612141469545100, 4.223949568033747300 ) ) ; +#8 = CARTESIAN_POINT ( 'NONE', ( -6.267176751789117300, -0.5363319534914269300, 3.357330624718627600 ) ) ; +#9 = DIRECTION ( 'NONE', ( 1.000000000000000000, 3.469446951953613700E-016, 0.0000000000000000000 ) ) ; +#10 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 1.741936567896977200, 0.0000000000000000000 ) ) ; +#11 = CARTESIAN_POINT ( 'NONE', ( 6.493565291164731700, -0.4983435954862173700, 4.829900516384137500 ) ) ; +#12 = CYLINDRICAL_SURFACE ( 'NONE', #2146, 9.999999999999998200 ) ; +#13 = CARTESIAN_POINT ( 'NONE', ( 6.249999999999980500, -0.9387505004004290700, 3.750000000000160800 ) ) ; +#14 = FACE_OUTER_BOUND ( 'NONE', #1092, .T. ) ; +#15 = CIRCLE ( 'NONE', #2199, 10.00000000000000000 ) ; +#16 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 1.249999999999999600, 12.50000000000000000 ) ) ; +#17 = LOCAL_TIME ( 17, 43, 56.00000000000000000, #19 ) ; +#18 = FACE_OUTER_BOUND ( 'NONE', #382, .T. ) ; +#19 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#20 = DIRECTION ( 'NONE', ( 1.734723475976807600E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#21 = VECTOR ( 'NONE', #1666, 1000.000000000000000 ) ; +#22 = CARTESIAN_POINT ( 'NONE', ( 9.795704756372451500, -1.499999999999997300, 7.038750000000003800 ) ) ; +#23 = CARTESIAN_POINT ( 'NONE', ( 6.773355676992431500, -0.3374639131592238100, 6.269120817544279400 ) ) ; +#24 = APPROVAL_PERSON_ORGANIZATION ( #48, #1141, #2138 ) ; +#25 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.4911800329090172400, 3.417345963448441500 ) ) ; +#26 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.1100301479937776200, 1.020898033750352600 ) ) ; +#27 = TOROIDAL_SURFACE ( 'NONE', #2296, 3.000000000000000000, 0.5000000000000000000 ) ; +#28 = CARTESIAN_POINT ( 'NONE', ( -6.504831440094630300, -0.1010117019202181100, 2.142301973291186500 ) ) ; +#29 = CARTESIAN_POINT ( 'NONE', ( 10.10412793377502500, -1.499999999999997300, 6.806239047935889600 ) ) ; +#30 = CARTESIAN_POINT ( 'NONE', ( -6.456875258551916900, -0.4982909508098876100, 2.750459436985170500 ) ) ; +#31 = CARTESIAN_POINT ( 'NONE', ( -8.661387073916190000, -1.531754153874054700, 1.249999999999997300 ) ) ; +#32 = EDGE_CURVE ( 'NONE', #2075, #582, #832, .T. ) ; +#33 = CARTESIAN_POINT ( 'NONE', ( 6.249999999999854300, -0.8236800419109875400, 3.630230869509803300 ) ) ; +#34 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.734723475976807100E-016, -0.0000000000000000000 ) ) ; +#35 = CARTESIAN_POINT ( 'NONE', ( 6.750000000000000900, -0.3249748766718710800, 1.267415028125261400 ) ) ; +#36 = CARTESIAN_POINT ( 'NONE', ( 6.750000000000002700, -0.3249748766718746400, 1.267415028125256100 ) ) ; +#37 = AXIS2_PLACEMENT_3D ( 'NONE', #458, #2233, #351 ) ; +#38 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.807003620809174400E-016, 0.0000000000000000000 ) ) ; +#39 = CARTESIAN_POINT ( 'NONE', ( -6.451872049912229700, -0.003648061073943435300, 2.759952476269806400 ) ) ; +#40 = CARTESIAN_POINT ( 'NONE', ( -8.040597708556138200, -1.117206025196987800, 0.4166999628784924200 ) ) ; +#41 = CARTESIAN_POINT ( 'NONE', ( 6.461607799077031100, -0.4915005098309857500, 2.730014275196850800 ) ) ; +#42 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.734723475976807100E-015, 1.000000000000000000 ) ) ; +#43 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.8469602734018947300, 3.823969065892800500 ) ) ; +#44 = DIRECTION ( 'NONE', ( -1.734723475976807600E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#45 = CYLINDRICAL_SURFACE ( 'NONE', #2209, 2.500000000000000000 ) ; +#46 = DIRECTION ( 'NONE', ( 2.602085213965211100E-016, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#47 = CARTESIAN_POINT ( 'NONE', ( -9.795704756372449800, -1.500000000000002700, 0.4612499999999918900 ) ) ; +#48 = PERSON_AND_ORGANIZATION ( #1970, #768 ) ; +#49 = LINE ( 'NONE', #1672, #21 ) ; +#50 = EDGE_CURVE ( 'NONE', #2245, #2218, #1901, .T. ) ; +#51 = CARTESIAN_POINT ( 'NONE', ( -8.750000000000000000, -1.500000000000002200, 3.750000000000000000 ) ) ; +#52 = CIRCLE ( 'NONE', #1539, 0.5000000000000000000 ) ; +#53 = CARTESIAN_POINT ( 'NONE', ( -7.852772961680737600, -0.1413851701224669900, 1.371615709262481700 ) ) ; +#54 = AXIS2_PLACEMENT_3D ( 'NONE', #1706, #241, #1493 ) ; +#55 = FACE_OUTER_BOUND ( 'NONE', #429, .T. ) ; +#56 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#57 = DATE_AND_TIME ( #62, #92 ) ; +#58 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#59 = FACE_OUTER_BOUND ( 'NONE', #1055, .T. ) ; +#60 = AXIS2_PLACEMENT_3D ( 'NONE', #260, #1511, #58 ) ; +#61 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.4526175258722814900, 3.485560460712950900 ) ) ; +#62 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#63 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.500000000000002400, 6.251009345674985300 ) ) ; +#64 = SPHERICAL_SURFACE ( 'NONE', #2246, 2.500000000000000000 ) ; +#65 = LINE ( 'NONE', #1897, #66 ) ; +#66 = VECTOR ( 'NONE', #1886, 1000.000000000000000 ) ; +#67 = CARTESIAN_POINT ( 'NONE', ( -8.079200516305117900, -1.356532417238692600, 1.340327822308104100 ) ) ; +#68 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -6.500000000000000900, 2.500000000000000400 ) ) ; +#69 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.807003620809173200E-016, 0.0000000000000000000 ) ) ; +#70 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.8416876048223032000, 0.0000000000000000000 ) ) ; +#71 = CARTESIAN_POINT ( 'NONE', ( -6.333307644926487800, -0.2768100308282309100, 2.916761599293713500 ) ) ; +#72 = CARTESIAN_POINT ( 'NONE', ( 8.335590153177658800, -1.237034755382083500, 7.159448092339555800 ) ) ; +#73 = CARTESIAN_POINT ( 'NONE', ( -3.749999999999999600, -5.000000000000000900, 7.500000000000000000 ) ) ; +#74 = ADVANCED_FACE ( 'NONE', ( #211, #220 ), #1906, .T. ) ; +#75 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -2.500000000000001300, 0.0000000000000000000 ) ) ; +#76 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.3224802157393446600, 1.534169966723210500 ) ) ; +#77 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.1725531113856350600, 2.998131433134010300 ) ) ; +#78 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#79 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.05672885952172303200, 3.102506146842555000 ) ) ; +#81 = CIRCLE ( 'NONE', #1305, 2.500000000000000400 ) ; +#82 = CYLINDRICAL_SURFACE ( 'NONE', #2281, 2.500000000000000400 ) ; +#83 = CARTESIAN_POINT ( 'NONE', ( 6.379113388733640200, -0.1950268931177932000, 2.692741139159499800 ) ) ; +#84 = VECTOR ( 'NONE', #1348, 1000.000000000000000 ) ; +#85 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999999100, -6.500000000000000900, 7.500000000000000000 ) ) ; +#86 = CARTESIAN_POINT ( 'NONE', ( 10.19703311092668800, -1.499999999999997300, 6.436405475503153900 ) ) ; +#87 = CIRCLE ( 'NONE', #2295, 2.500000000000000000 ) ; +#88 = FACE_OUTER_BOUND ( 'NONE', #860, .T. ) ; +#89 = EDGE_CURVE ( 'NONE', #967, #2117, #195, .T. ) ; +#90 = CARTESIAN_POINT ( 'NONE', ( 9.964272585342977000, -1.499999999999997300, 6.940339233577073900 ) ) ; +#91 = AXIS2_PLACEMENT_3D ( 'NONE', #879, #2154, #679 ) ; +#92 = LOCAL_TIME ( 17, 43, 56.00000000000000000, #118 ) ; +#93 = CARTESIAN_POINT ( 'NONE', ( -6.379113388733554000, -0.1950268931177082700, 2.692741139159473600 ) ) ; +#94 = CIRCLE ( 'NONE', #2331, 1.199999999999999700 ) ; +#95 = CARTESIAN_POINT ( 'NONE', ( 10.16328963370938400, -1.499999999999997600, 6.724598493810148600 ) ) ; +#96 = FACE_OUTER_BOUND ( 'NONE', #453, .T. ) ; +#97 = EDGE_CURVE ( 'NONE', #1254, #2634, #2300, .T. ) ; +#98 = SPHERICAL_SURFACE ( 'NONE', #2313, 2.500000000000000000 ) ; +#99 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.06440818146705819300, 2.760697958122199800 ) ) ; +#100 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#101 = CARTESIAN_POINT ( 'NONE', ( -5.833759012863216000, -0.08906916515871971000, 3.173318162855028200 ) ) ; +#102 = FACE_OUTER_BOUND ( 'NONE', #489, .T. ) ; +#103 = CARTESIAN_POINT ( 'NONE', ( 10.20428321074607900, -1.499999999999996900, 6.582892699368624500 ) ) ; +#104 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.1014633329783420600, 2.870978408529465400 ) ) ; +#105 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#106 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, -2.500000000000001800, 7.500000000000000000 ) ) ; +#107 = CARTESIAN_POINT ( 'NONE', ( 6.347601559604835400, -0.5309027329530795500, 3.038950439396698000 ) ) ; +#108 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#109 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.1100301479937563200, 1.020898033750313300 ) ) ; +#110 = EDGE_CURVE ( 'NONE', #549, #1254, #207, .T. ) ; +#111 = CARTESIAN_POINT ( 'NONE', ( 9.881602733532838900, -1.499999999999997600, 6.994691668535266700 ) ) ; +#112 = CARTESIAN_POINT ( 'NONE', ( -6.453374369304794900, -0.1299222254216586800, 2.362470329156547000 ) ) ; +#113 = AXIS2_PLACEMENT_3D ( 'NONE', #1391, #1171, #149 ) ; +#114 = PLANE ( 'NONE', #1606 ) ; +#115 = CARTESIAN_POINT ( 'NONE', ( -6.258838410278608300, -0.7251466147064374900, 4.007216529307723500 ) ) ; +#116 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.01466041860291929800, 2.406708541288513200 ) ) ; +#117 = CARTESIAN_POINT ( 'NONE', ( -8.750000000000000000, -1.500000000000002200, 2.550000000000000300 ) ) ; +#118 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#119 = FACE_OUTER_BOUND ( 'NONE', #513, .T. ) ; +#120 = CARTESIAN_POINT ( 'NONE', ( 10.20929721291203400, -1.499999999999997600, 6.533114500475712700 ) ) ; +#121 = FACE_OUTER_BOUND ( 'NONE', #251, .T. ) ; +#122 = EDGE_CURVE ( 'NONE', #2222, #1589, #187, .T. ) ; +#123 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.2552283350445185800, 2.486889972313035500 ) ) ; +#124 = PERSON_AND_ORGANIZATION ( #1970, #768 ) ; +#125 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#126 = VECTOR ( 'NONE', #2650, 1000.000000000000100 ) ; +#127 = PERSON_AND_ORGANIZATION ( #1970, #768 ) ; +#128 = LINE ( 'NONE', #2646, #126 ) ; +#129 = CARTESIAN_POINT ( 'NONE', ( 6.250075410712298700, -0.9576952670918028600, 3.769417720636460100 ) ) ; +#130 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #36, #1097, #1274 ), + ( #2588, #718, #660 ), + ( #1928, #2195, #76 ), + ( #1534, #282, #1749 ), + ( #500, #1962, #695 ), + ( #2173, #908, #2379 ), + ( #1106, #2568, #1328 ), + ( #83, #1543, #296 ), + ( #1761, #510, #1974 ), + ( #1316, #633, #555 ), + ( #1133, #893, #2558 ), + ( #1346, #1699, #2599 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0008242104035962853200, 0.001236315605394427900, 0.001648420807192570600, 0.002472631210788855900, 0.003296841614385141300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865469100, 1.000000000000000000), + ( 1.000000000000000000, 0.7458313642435434600, 1.000000000000000000), + ( 1.000000000000000000, 0.7821085400636395000, 1.000000000000000000), + ( 1.000000000000000000, 0.8318113535495502700, 1.000000000000000000), + ( 1.000000000000000000, 0.8479078540276605600, 1.000000000000000000), + ( 1.000000000000000000, 0.8783064667575057900, 1.000000000000000000), + ( 1.000000000000000000, 0.8926433373566723400, 1.000000000000000000), + ( 1.000000000000000000, 0.9336126647199011200, 1.000000000000000000), + ( 1.000000000000000000, 0.9575908025920733000, 1.000000000000000000), + ( 1.000000000000000000, 0.9915195602578049700, 1.000000000000000000), + ( 1.000000000000000000, 1.000382643617545600, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#131 = CARTESIAN_POINT ( 'NONE', ( -9.881602733532840700, -1.500000000000002700, 0.5053083314647295300 ) ) ; +#132 = AXIS2_PLACEMENT_3D ( 'NONE', #2226, #753, #2014 ) ; +#133 = CARTESIAN_POINT ( 'NONE', ( -6.478808769809390400, -0.1181618869075881900, 2.254871672388169700 ) ) ; +#134 = CARTESIAN_POINT ( 'NONE', ( 6.252560083468913500, -0.5702029647902624500, 4.089305653771797100 ) ) ; +#135 = PLANE ( 'NONE', #198 ) ; +#136 = CARTESIAN_POINT ( 'NONE', ( 5.750090492854758000, -0.5721190838647530800, 4.091626580954689500 ) ) ; +#137 = CARTESIAN_POINT ( 'NONE', ( 10.12484963802876200, -1.499999999999997600, 6.308487707900940000 ) ) ; +#138 = CARTESIAN_POINT ( 'NONE', ( -9.719035299126916900, -1.500000000000002900, 1.336119972816851600 ) ) ; +#139 = CARTESIAN_POINT ( 'NONE', ( 11.03959828868357300, -0.1521428184594198200, 1.875796849053321700 ) ) ; +#140 = CARTESIAN_POINT ( 'NONE', ( 8.476934860899485000, -1.499999999999997600, 6.235042339640919800 ) ) ; +#141 = EDGE_CURVE ( 'NONE', #2160, #1531, #189, .T. ) ; +#142 = AXIS2_PLACEMENT_3D ( 'NONE', #161, #367, #1614 ) ; +#143 = CARTESIAN_POINT ( 'NONE', ( 6.249019673119438100, -0.8230389033603062700, 3.633497320006662700 ) ) ; +#144 = ADVANCED_FACE ( 'NONE', ( #242 ), #564, .T. ) ; +#145 = AXIS2_PLACEMENT_3D ( 'NONE', #758, #1181, #563 ) ; +#146 = CARTESIAN_POINT ( 'NONE', ( 6.234037820248705200, -0.4181579352451073000, 3.904647722351932200 ) ) ; +#147 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, 0.0000000000000000000, 2.500000000000000000 ) ) ; +#148 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.02688862559446505600, 2.287474868561195000 ) ) ; +#149 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#150 = VECTOR ( 'NONE', #974, 1000.000000000000000 ) ; +#151 = CIRCLE ( 'NONE', #2212, 3.000000000000000900 ) ; +#152 = CIRCLE ( 'NONE', #2394, 0.5000000000000000000 ) ; +#153 = CARTESIAN_POINT ( 'NONE', ( 5.748823673678431900, -0.4038098291673003500, 3.887759540768959800 ) ) ; +#154 = PERSON_AND_ORGANIZATION ( #1970, #768 ) ; +#155 = DIRECTION ( 'NONE', ( 2.602085213965211100E-016, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#156 = CIRCLE ( 'NONE', #2423, 2.500000000000000400 ) ; +#157 = APPROVAL_DATE_TIME ( #1609, #1141 ) ; +#158 = CIRCLE ( 'NONE', #2352, 2.500000000000000000 ) ; +#159 = EDGE_CURVE ( 'NONE', #701, #1856, #165, .T. ) ; +#160 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.2920992887519283700, 2.355093168099336300 ) ) ; +#161 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.999999999999999100, 5.000000000000066600 ) ) ; +#162 = APPROVAL_DATE_TIME ( #185, #1464 ) ; +#163 = ADVANCED_FACE ( 'NONE', ( #182 ), #1737, .F. ) ; +#164 = LINE ( 'NONE', #433, #150 ) ; +#165 = CIRCLE ( 'NONE', #2433, 1.199999999999999700 ) ; +#166 = CARTESIAN_POINT ( 'NONE', ( 6.259196403375537600, -0.7158747907999297700, 3.480984856974683500 ) ) ; +#167 = CARTESIAN_POINT ( 'NONE', ( 6.232616707451041000, -0.2937195162542110000, 3.698204989727011900 ) ) ; +#168 = CARTESIAN_POINT ( 'NONE', ( 8.040597708556177300, -1.117206025197008600, 7.083300037121522200 ) ) ; +#169 = CARTESIAN_POINT ( 'NONE', ( -6.531283289548705200, -0.1125400916348040400, 2.041242863847855500 ) ) ; +#170 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.2921067249200737200, 5.144938565268000200 ) ) ; +#171 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #595, #2062, #392 ), + ( #1640, #174, #1412 ), + ( #2641, #1198, #2456 ), + ( #993, #2259, #786 ), + ( #2048, #589, #1842 ), + ( #379, #1630, #168 ), + ( #1403, #2633, #1190 ), + ( #2451, #981, #2248 ), + ( #778, #2039, #578 ), + ( #1425, #2647, #1203 ), + ( #1644, #181, #647 ), + ( #1907, #455, #1695 ), + ( #227, #1474, #23 ), + ( #1261, #2509, #1042 ), + ( #2319, #842, #2106 ), + ( #638, #1900, #444 ), + ( #1683, #222, #1467 ), + ( #11, #1250, #2502 ), + ( #1036, #2309, #838 ), + ( #2097, #626, #1892 ), + ( #436, #1673, #214 ), + ( #1461, #7, #1235 ), + ( #2498, #1031, #2299 ), + ( #824, #2094, #622 ), + ( #1880, #427, #1667 ), + ( #205, #1450, #2 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -6.776263578034402700E-020, 0.0003117651199006240800, 0.0006235302398012482600, 0.0009352953597018724000, 0.001247060479602496500, 0.001870590719403744800, 0.002494120959204993100, 0.003117651199006241100, 0.003429416318906865600, 0.003741181438807489600, 0.004052946558708113600, 0.004364711678608738100, 0.004988241918409986100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.2499999999999995600, 1.000000000000000000), + ( 1.000000000000000000, 0.2499760950583550500, 1.000000000000000000), + ( 1.000000000000000000, 0.2545484055413470000, 1.000000000000000000), + ( 1.000000000000000000, 0.2704677616995374000, 1.000000000000000000), + ( 1.000000000000000000, 0.2817695917742848400, 1.000000000000000000), + ( 1.000000000000000000, 0.3084315763334031200, 1.000000000000000000), + ( 1.000000000000000000, 0.3236487628465637400, 1.000000000000000000), + ( 1.000000000000000000, 0.3554114645798888100, 1.000000000000000000), + ( 1.000000000000000000, 0.3720577744228423200, 1.000000000000000000), + ( 1.000000000000000000, 0.4228250297224175900, 1.000000000000000000), + ( 1.000000000000000000, 0.4580224156113161800, 1.000000000000000000), + ( 1.000000000000000000, 0.5253830961240360000, 1.000000000000000000), + ( 1.000000000000000000, 0.5575090605478108000, 1.000000000000000000), + ( 1.000000000000000000, 0.6166529525240147500, 1.000000000000000000), + ( 1.000000000000000000, 0.6439460129194518600, 1.000000000000000000), + ( 1.000000000000000000, 0.6772031439453986000, 1.000000000000000000), + ( 1.000000000000000000, 0.6870934825343466600, 1.000000000000000000), + ( 1.000000000000000000, 0.7041608022264368400, 1.000000000000000000), + ( 1.000000000000000000, 0.7112385613050034000, 1.000000000000000000), + ( 1.000000000000000000, 0.7219798917371678100, 1.000000000000000000), + ( 1.000000000000000000, 0.7257212178203448200, 1.000000000000000000), + ( 1.000000000000000000, 0.7298933834737492100, 1.000000000000000000), + ( 1.000000000000000000, 0.7302798788495332700, 1.000000000000000000), + ( 1.000000000000000000, 0.7266576654487340000, 1.000000000000000000), + ( 1.000000000000000000, 0.7178969860314830000, 1.000000000000000000), + ( 1.000000000000000000, 0.7053563207170432400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#172 = CARTESIAN_POINT ( 'NONE', ( 5.761035676898176300, -0.2698434879239978200, 3.658977284131089000 ) ) ; +#173 = CARTESIAN_POINT ( 'NONE', ( 9.818472803525361700, -1.499999999999997300, 6.166661178191852800 ) ) ; +#174 = CARTESIAN_POINT ( 'NONE', ( 8.786756602809985500, 0.4047374712924130000, 6.250000008509071700 ) ) ; +#175 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000001800, 0.02515241365657842900, 2.051494732895252900 ) ) ; +#176 = CARTESIAN_POINT ( 'NONE', ( 7.485981223124683800, -1.014757851267633400, 5.911775977511489100 ) ) ; +#177 = EDGE_CURVE ( 'NONE', #1720, #885, #156, .T. ) ; +#178 = CARTESIAN_POINT ( 'NONE', ( 10.00472517855574000, -1.499999999999997300, 6.222332133967213100 ) ) ; +#179 = CIRCLE ( 'NONE', #1340, 1.200000000000000600 ) ; +#180 = CARTESIAN_POINT ( 'NONE', ( 6.301104960321794100, -0.6018974851886975700, 3.240558138083400800 ) ) ; +#181 = CARTESIAN_POINT ( 'NONE', ( 7.852772961680845000, -0.1413851701229893700, 6.128384290737716200 ) ) ; +#182 = FACE_OUTER_BOUND ( 'NONE', #1027, .T. ) ; +#183 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.3371697310610971600, 2.083990216784190600 ) ) ; +#184 = CARTESIAN_POINT ( 'NONE', ( 6.249999999999980500, -0.9387505004004290700, 3.750000000000160800 ) ) ; +#185 = DATE_AND_TIME ( #188, #213 ) ; +#186 = CARTESIAN_POINT ( 'NONE', ( 10.17941553451731500, -1.499999999999997100, 6.389291393398759800 ) ) ; +#187 = CIRCLE ( 'NONE', #2462, 2.500000000000000400 ) ; +#188 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#189 = CIRCLE ( 'NONE', #2449, 3.000000000000000000 ) ; +#190 = CARTESIAN_POINT ( 'NONE', ( 9.959741346688145900, -1.499999999999997100, 6.204389224665138900 ) ) ; +#191 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.3072078528123805000, 1.533776767325271400 ) ) ; +#192 = EDGE_CURVE ( 'NONE', #1720, #1570, #164, .T. ) ; +#193 = CARTESIAN_POINT ( 'NONE', ( 9.355741625432477400, -1.625216913719085500, 1.322350724153273300 ) ) ; +#194 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 1.249999999999999600, 12.50000000000000000 ) ) ; +#195 = CIRCLE ( 'NONE', #2483, 2.500000000000000400 ) ; +#196 = AXIS2_PLACEMENT_3D ( 'NONE', #581, #2052, #1839 ) ; +#197 = CARTESIAN_POINT ( 'NONE', ( 6.270481662090641200, -0.1570584232506642400, 3.384035533001243500 ) ) ; +#198 = AXIS2_PLACEMENT_3D ( 'NONE', #642, #1895, #438 ) ; +#199 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#200 = CARTESIAN_POINT ( 'NONE', ( 5.811325955962387500, -0.1273718567738286700, 3.298337207790569700 ) ) ; +#201 = CARTESIAN_POINT ( 'NONE', ( -6.558364358243364800, -0.1189776701491889500, 1.935225860995883900 ) ) ; +#202 = CARTESIAN_POINT ( 'NONE', ( 6.319799177876094000, -0.5712553360118117800, 3.157212107976952200 ) ) ; +#203 = CARTESIAN_POINT ( 'NONE', ( -8.750000000000000000, -6.501000000000001200, 3.750000000000000000 ) ) ; +#204 = CARTESIAN_POINT ( 'NONE', ( 6.290013069862566500, -0.1186612141469965100, 3.276050431966293500 ) ) ; +#205 = CARTESIAN_POINT ( 'NONE', ( 6.250075410712298700, -0.9576952670917378000, 3.730582279363605600 ) ) ; +#206 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000900, 0.009794386968464614500, 1.934566417043021700 ) ) ; +#207 = CIRCLE ( 'NONE', #2466, 2.499999999999999600 ) ; +#208 = CARTESIAN_POINT ( 'NONE', ( 5.833759012863256800, -0.08906916515866378200, 3.173318162854827900 ) ) ; +#209 = LINE ( 'NONE', #2360, #1381 ) ; +#210 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.3449276475089316800, 1.944558889147997700 ) ) ; +#211 = FACE_BOUND ( 'NONE', #759, .T. ) ; +#212 = CARTESIAN_POINT ( 'NONE', ( 6.365846649954265900, -0.5267959145697437300, 2.992975347662613700 ) ) ; +#213 = LOCAL_TIME ( 17, 43, 56.00000000000000000, #217 ) ; +#214 = CARTESIAN_POINT ( 'NONE', ( 5.889015980533197400, -0.03349489806825969200, 4.573036979395589600 ) ) ; +#215 = VECTOR ( 'NONE', #2047, 1000.000000000000000 ) ; +#216 = CARTESIAN_POINT ( 'NONE', ( -6.639404172397185300, -0.1639620307254603400, 1.630192748215185400 ) ) ; +#217 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#218 = APPROVAL_PERSON_ORGANIZATION ( #243, #1464, #2203 ) ; +#219 = CARTESIAN_POINT ( 'NONE', ( 9.427914811163557100, -1.499999999999997100, 6.187262926016895600 ) ) ; +#220 = FACE_OUTER_BOUND ( 'NONE', #546, .T. ) ; +#221 = CARTESIAN_POINT ( 'NONE', ( 10.08823165210784200, -1.499999999999997300, 6.274686019944175200 ) ) ; +#222 = CARTESIAN_POINT ( 'NONE', ( 6.601089278863534000, 0.01506555848608462400, 5.033280610175029100 ) ) ; +#223 = EDGE_CURVE ( 'NONE', #1694, #1350, #953, .T. ) ; +#224 = AXIS2_PLACEMENT_3D ( 'NONE', #1903, #447, #1687 ) ; +#225 = CARTESIAN_POINT ( 'NONE', ( 6.341787547819831300, -0.05843129396322849200, 3.066113406597416700 ) ) ; +#226 = CARTESIAN_POINT ( 'NONE', ( 5.889015980533176100, -0.03349489806827975200, 2.926963020604521400 ) ) ; +#227 = CARTESIAN_POINT ( 'NONE', ( 7.102796399177565300, -0.7699711246520371000, 5.637747212391334800 ) ) ; +#228 = CARTESIAN_POINT ( 'NONE', ( -6.622956709669276500, -0.1466835684370497200, 1.688238664612588900 ) ) ; +#229 = EDGE_CURVE ( 'NONE', #2160, #885, #152, .T. ) ; +#230 = CARTESIAN_POINT ( 'NONE', ( 6.393195612716044500, -0.5125597263190010400, 2.911563659523016800 ) ) ; +#231 = CARTESIAN_POINT ( 'NONE', ( -8.158831423890706700, -1.393764822383499300, 1.319466645283486000 ) ) ; +#232 = VECTOR ( 'NONE', #1992, 1000.000000000000000 ) ; +#233 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999999100, -0.07463715628738069900, 1.598699763224073800 ) ) ; +#234 = FACE_OUTER_BOUND ( 'NONE', #518, .T. ) ; +#235 = LINE ( 'NONE', #2080, #232 ) ; +#236 = CARTESIAN_POINT ( 'NONE', ( -6.658267548862994500, 0.01411132347721190000, 2.374896879895997100 ) ) ; +#237 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -2.500000000000001300, 7.500000000000000000 ) ) ; +#238 = AXIS2_PLACEMENT_3D ( 'NONE', #2034, #572, #1826 ) ; +#239 = CARTESIAN_POINT ( 'NONE', ( -8.659229808472559900, -1.500000000000002400, 1.248990654325014400 ) ) ; +#240 = CARTESIAN_POINT ( 'NONE', ( 6.374280101213889400, -0.03594650085740464000, 2.962535915829751500 ) ) ; +#241 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#242 = FACE_OUTER_BOUND ( 'NONE', #463, .T. ) ; +#243 = PERSON_AND_ORGANIZATION ( #1970, #768 ) ; +#244 = ORIENTED_EDGE ( 'NONE', *, *, #1943, .T. ) ; +#245 = CARTESIAN_POINT ( 'NONE', ( -6.761037276645729400, -0.5776789688401622300, 2.225704490762249900 ) ) ; +#246 = DATE_AND_TIME ( #280, #286 ) ; +#247 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.3224802157393744100, 1.534169966723210500 ) ) ; +#248 = ORIENTED_EDGE ( 'NONE', *, *, #1810, .T. ) ; +#249 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 1.741936567896977200, 2.500000000000000000 ) ) ; +#250 = CARTESIAN_POINT ( 'NONE', ( -6.264620393852781400, -0.6008527496795873500, 4.079420670781769500 ) ) ; +#251 = EDGE_LOOP ( 'NONE', ( #2528, #2559, #2282, #1090, #971 ) ) ; +#252 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#253 = CARTESIAN_POINT ( 'NONE', ( 9.524441295960347300, -1.499999999999997100, 6.174141307333288300 ) ) ; +#254 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#255 = EDGE_CURVE ( 'NONE', #413, #2222, #128, .T. ) ; +#256 = CARTESIAN_POINT ( 'NONE', ( 5.921834734243281800, -0.01569965501629901400, 2.804845488995307200 ) ) ; +#257 = CARTESIAN_POINT ( 'NONE', ( -7.408477594459222700, -0.7593931866160160700, 0.6999307342405425300 ) ) ; +#258 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#259 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.602085213965211100E-016, 0.0000000000000000000 ) ) ; +#260 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.531754163448154200, 6.750000000000002700 ) ) ; +#261 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#262 = CARTESIAN_POINT ( 'NONE', ( 6.456875258551952400, -0.4982909508098883900, 2.750459436985092300 ) ) ; +#263 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -1.499999999999998200, 3.750000000000000000 ) ) ; +#264 = AXIS2_PLACEMENT_3D ( 'NONE', #2003, #2418, #2207 ) ; +#265 = CARTESIAN_POINT ( 'NONE', ( 6.451872049912277700, -0.003648061073904478200, 2.759952476269748300 ) ) ; +#266 = CARTESIAN_POINT ( 'NONE', ( 9.795704756359208800, -1.499999999999997300, 0.4612499999932023200 ) ) ; +#267 = CARTESIAN_POINT ( 'NONE', ( 8.568178868412252000, -1.499999999999997600, 6.245068550143043900 ) ) ; +#268 = CARTESIAN_POINT ( 'NONE', ( -6.269011297918177100, -1.132092084815519200, -1.336382355046096500E-048 ) ) ; +#269 = CARTESIAN_POINT ( 'NONE', ( -6.695218836399581300, -0.2292857428200275600, 1.436268514827054400 ) ) ; +#270 = CARTESIAN_POINT ( 'NONE', ( 5.998250311278315600, 0.002136308605187773500, 2.563189155766856200 ) ) ; +#271 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.289692704310185100, 7.187500000000000000 ) ) ; +#272 = ORIENTED_EDGE ( 'NONE', *, *, #1721, .F. ) ; +#273 = EDGE_CURVE ( 'NONE', #582, #2245, #158, .T. ) ; +#274 = CARTESIAN_POINT ( 'NONE', ( 6.493565291164705900, -0.4983435954862185400, 2.670099483615918000 ) ) ; +#275 = CIRCLE ( 'NONE', #1527, 10.00000000000000000 ) ; +#276 = AXIS2_PLACEMENT_3D ( 'NONE', #1490, #34, #1270 ) ; +#277 = VERTEX_POINT ( 'NONE', #2610 ) ; +#278 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000900, -0.1887085033111849100, 1.402250983098035400 ) ) ; +#279 = ADVANCED_FACE ( 'NONE', ( #102 ), #2600, .F. ) ; +#280 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#281 = CARTESIAN_POINT ( 'NONE', ( -7.744050055620679300, -1.174531266189144700, 6.043263279188658500 ) ) ; +#282 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.009794386968474842400, 1.934566417043000600 ) ) ; +#283 = EDGE_LOOP ( 'NONE', ( #2556, #2584, #2580, #1192 ) ) ; +#284 = AXIS2_PLACEMENT_3D ( 'NONE', #538, #1368, #1148 ) ; +#285 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.2459239244881678800, 1.260696868135228000 ) ) ; +#286 = LOCAL_TIME ( 17, 43, 56.00000000000000000, #316 ) ; +#287 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#288 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#289 = ORIENTED_EDGE ( 'NONE', *, *, #815, .F. ) ; +#290 = EDGE_LOOP ( 'NONE', ( #1529, #2406, #1518, #1732 ) ) ; +#291 = CARTESIAN_POINT ( 'NONE', ( 6.497972648085971400, 0.006132037403075421000, 2.659280560384368600 ) ) ; +#292 = ORIENTED_EDGE ( 'NONE', *, *, #1302, .F. ) ; +#293 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 1.741936567896977200, 12.50000000000000000 ) ) ; +#294 = ADVANCED_FACE ( 'NONE', ( #121 ), #98, .T. ) ; +#295 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#296 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.1014633329783335300, 2.870978408529445400 ) ) ; +#297 = CARTESIAN_POINT ( 'NONE', ( -6.749999999999992900, -0.3249748766718599800, 1.267415028125283600 ) ) ; +#298 = CARTESIAN_POINT ( 'NONE', ( 6.042278350797591500, 0.002070511665771845300, 2.442649225918086300 ) ) ; +#299 = CARTESIAN_POINT ( 'NONE', ( -6.252560083468929400, -0.5702029647903957800, 4.089305653771957000 ) ) ; +#300 = EDGE_CURVE ( 'NONE', #277, #1128, #2098, .T. ) ; +#301 = PRODUCT ( 'Trigger_Guide', 'Trigger_Guide', '', ( #2336 ) ) ; +#302 = CARTESIAN_POINT ( 'NONE', ( 6.574736491086548900, -0.5113435167108503200, 2.514722141656880300 ) ) ; +#303 = CARTESIAN_POINT ( 'NONE', ( 6.601089278863554500, 0.01506555848617489500, 2.466719389824976600 ) ) ; +#304 = CARTESIAN_POINT ( 'NONE', ( 6.328612145939543700, -1.415493723299953800, 7.499999999999999100 ) ) ; +#305 = CARTESIAN_POINT ( 'NONE', ( 6.139683787903948100, -0.01417940191215196100, 2.209583211991136100 ) ) ; +#306 = CARTESIAN_POINT ( 'NONE', ( -6.319799177876058500, -0.5712553360118568500, 3.157212107977092100 ) ) ; +#307 = CARTESIAN_POINT ( 'NONE', ( 6.618815831353384900, -0.5240946160487957000, 2.440260935184479100 ) ) ; +#308 = CARTESIAN_POINT ( 'NONE', ( 7.361368434619829600, -0.9340802624720560000, 1.665944267745880200 ) ) ; +#309 = CARTESIAN_POINT ( 'NONE', ( 6.504828035548917400, -0.1010116187733456800, 2.142315637485882300 ) ) ; +#310 = ORIENTED_EDGE ( 'NONE', *, *, #639, .F. ) ; +#311 = CARTESIAN_POINT ( 'NONE', ( 1.127570259384925200E-015, -6.500000000000002700, 0.0000000000000000000 ) ) ; +#312 = VECTOR ( 'NONE', #728, 1000.000000000000000 ) ; +#313 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.1100301479937719800, 1.020898033750346400 ) ) ; +#314 = CARTESIAN_POINT ( 'NONE', ( 6.658267548863110000, 0.01411132347719695200, 2.374896879895899800 ) ) ; +#315 = EDGE_LOOP ( 'NONE', ( #2419, #248, #1174, #1361, #2057, #2221, #494, #1714, #2389 ) ) ; +#316 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#317 = VERTEX_POINT ( 'NONE', #2288 ) ; +#318 = EDGE_CURVE ( 'NONE', #773, #1441, #94, .T. ) ; +#319 = CARTESIAN_POINT ( 'NONE', ( 6.192578998272342300, -0.03011826609222993300, 2.097891402487927600 ) ) ; +#320 = PERSON_AND_ORGANIZATION ( #1970, #768 ) ; +#321 = EDGE_LOOP ( 'NONE', ( #2353, #2380, #2402, #2436 ) ) ; +#322 = CARTESIAN_POINT ( 'NONE', ( 6.761037276645775600, -0.5776789688401785500, 2.225704490762193500 ) ) ; +#323 = APPROVAL_DATE_TIME ( #355, #1664 ) ; +#324 = CARTESIAN_POINT ( 'NONE', ( -6.347601559604881600, -0.5309027329530429100, 4.461049560603465900 ) ) ; +#325 = AXIS2_PLACEMENT_3D ( 'NONE', #1049, #2321, #844 ) ; +#326 = ORIENTED_EDGE ( 'NONE', *, *, #318, .F. ) ; +#327 = CARTESIAN_POINT ( 'NONE', ( 9.988393474176399800, -1.596258624408844100, 0.5209408204003717100 ) ) ; +#328 = CARTESIAN_POINT ( 'NONE', ( 6.847020099932606700, 0.0002736713338258347800, 2.108287766126245400 ) ) ; +#329 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#330 = ADVANCED_FACE ( 'NONE', ( #119 ), #82, .T. ) ; +#331 = ORIENTED_EDGE ( 'NONE', *, *, #1237, .T. ) ; +#332 = EDGE_LOOP ( 'NONE', ( #1418, #1421, #1423, #1452, #1457, #1480, #1489, #1513, #1515, #1559, #1587, #1597, #1602, #1605 ) ) ; +#333 = CARTESIAN_POINT ( 'NONE', ( 6.363244730678371000, -0.09709871898775183900, 1.776056736720869500 ) ) ; +#334 = CARTESIAN_POINT ( 'NONE', ( 9.719035299126909800, -1.499999999999996900, 6.163880027183147100 ) ) ; +#335 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 4.659258262890690000, 3.728334524848830400 ) ) ; +#336 = CARTESIAN_POINT ( 'NONE', ( 6.805893733923114500, -0.6011258289602594600, 2.170614483263885800 ) ) ; +#337 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999999100, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#338 = EDGE_CURVE ( 'NONE', #1753, #1292, #87, .T. ) ; +#339 = AXIS2_PLACEMENT_3D ( 'NONE', #1358, #1792, #329 ) ; +#340 = CARTESIAN_POINT ( 'NONE', ( 6.870409169538304700, -0.6346662111082355100, 2.093495381685282400 ) ) ; +#341 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#342 = DIRECTION ( 'NONE', ( -2.602085213965211100E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#343 = AXIS2_PLACEMENT_3D ( 'NONE', #2009, #545, #1805 ) ; +#344 = CARTESIAN_POINT ( 'NONE', ( 6.995829951626940400, -0.02511398329011088600, 1.948945799941037100 ) ) ; +#345 = CARTESIAN_POINT ( 'NONE', ( -10.10412793377502400, -1.500000000000002700, 0.6937609520641048200 ) ) ; +#346 = CARTESIAN_POINT ( 'NONE', ( 6.494491005466572100, -0.1683327565410541500, 1.577743071485236300 ) ) ; +#347 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -2.500000000000003100, 7.500000000000000000 ) ) ; +#348 = EDGE_LOOP ( 'NONE', ( #2549, #1929, #1189, #289 ) ) ; +#349 = CARTESIAN_POINT ( 'NONE', ( 7.102796399177581300, -0.7699711246520103400, 1.862252787608644100 ) ) ; +#350 = EDGE_LOOP ( 'NONE', ( #968, #2049 ) ) ; +#351 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.8700100493312450400, 0.4930339887499082800 ) ) ; +#352 = CARTESIAN_POINT ( 'NONE', ( -9.427914811163557100, -1.500000000000002700, 1.312737073983102100 ) ) ; +#353 = EDGE_LOOP ( 'NONE', ( #2523, #2617, #2592, #2387 ) ) ; +#354 = CARTESIAN_POINT ( 'NONE', ( 7.126816450401760200, -0.7858356468882109500, 1.842944394144445700 ) ) ; +#355 = DATE_AND_TIME ( #359, #387 ) ; +#356 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#357 = ORIENTED_EDGE ( 'NONE', *, *, #1742, .T. ) ; +#358 = ADVANCED_FACE ( 'NONE', ( #88 ), #1528, .T. ) ; +#359 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#360 = EDGE_LOOP ( 'NONE', ( #2149, #2162, #2185, #2190 ) ) ; +#361 = EDGE_LOOP ( 'NONE', ( #1947, #790, #579, #310 ) ) ; +#362 = ORIENTED_EDGE ( 'NONE', *, *, #2645, .T. ) ; +#363 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.499999999999997600, 6.251009345674983600 ) ) ; +#364 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 1.084202172485504400E-015, 0.0000000000000000000 ) ) ; +#365 = CARTESIAN_POINT ( 'NONE', ( 7.485866380957675800, -1.014682840062809800, 1.588297441487652700 ) ) ; +#366 = EDGE_LOOP ( 'NONE', ( #898, #921, #928, #954 ) ) ; +#367 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890690900, -0.2588190451025179100 ) ) ; +#368 = ADVANCED_FACE ( 'NONE', ( #96 ), #64, .T. ) ; +#369 = CARTESIAN_POINT ( 'NONE', ( 7.311155539930720000, -0.07826340576593592000, 1.676761330867250200 ) ) ; +#370 = ADVANCED_FACE ( 'NONE', ( #55 ), #45, .T. ) ; +#371 = CARTESIAN_POINT ( 'NONE', ( 6.773355676992491000, -0.3374639131592525600, 1.230879182455652400 ) ) ; +#372 = CARTESIAN_POINT ( 'NONE', ( 6.505213034913037500E-016, -2.500000000000003600, 4.999999999999999100 ) ) ; +#373 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 1.084202172485504400E-015, 7.500000000000000000 ) ) ; +#374 = EDGE_CURVE ( 'NONE', #1562, #1209, #65, .T. ) ; +#375 = AXIS2_PLACEMENT_3D ( 'NONE', #2145, #865, #254 ) ; +#376 = CARTESIAN_POINT ( 'NONE', ( 7.226862179744693500, -0.8487621348752411000, 1.761168522183368200 ) ) ; +#377 = AXIS2_PLACEMENT_3D ( 'NONE', #2372, #2168, #1099 ) ; +#378 = CARTESIAN_POINT ( 'NONE', ( 7.485152036820552200, -0.1071147135071207200, 1.562599110107924800 ) ) ; +#379 = CARTESIAN_POINT ( 'NONE', ( 8.158831423890733300, -1.393764822383542800, 6.180533354716518900 ) ) ; +#380 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999999100, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#381 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.1014859662244596700, 4.629062816961054600 ) ) ; +#382 = EDGE_LOOP ( 'NONE', ( #1736, #1925, #2551, #272 ) ) ; +#383 = ADVANCED_FACE ( 'NONE', ( #59 ), #27, .F. ) ; +#384 = LINE ( 'NONE', #799, #849 ) ; +#385 = VERTEX_POINT ( 'NONE', #1957 ) ; +#386 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#387 = LOCAL_TIME ( 17, 43, 56.00000000000000000, #391 ) ; +#388 = EDGE_LOOP ( 'NONE', ( #1932, #770, #557, #292 ) ) ; +#389 = CARTESIAN_POINT ( 'NONE', ( 6.750000000000000900, -2.500000000000001800, 2.500000000000000400 ) ) ; +#390 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1889, #1905, #1519 ), + ( #1465, #1458, #1446 ), + ( #1429, #1280, #1258 ), + ( #1247, #1233, #1226 ), + ( #1075, #1065, #1039 ), + ( #1021, #1010, #1004 ), + ( #920, #877, #840 ), + ( #814, #809, #677 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0006277702842063099000, 0.0009416554263094648400, 0.001255540568412619800 ), + ( 0.0000000000000000000, 0.9752759569245588200 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.2685430323065792200, 0.9638308528458325900), + ( 1.000000000000000000, 0.2685406068168665300, 0.9638307329100083100), + ( 1.000000000000000000, 0.2640642240687904900, 0.9636093843502371300), + ( 1.000000000000000000, 0.2506048976106634600, 0.9629438464160028400), + ( 1.000000000000000000, 0.2450754525487481800, 0.9626704259402145700), + ( 1.000000000000000000, 0.2320127022785766200, 0.9620244979394876300), + ( 1.000000000000000000, 0.2244028032026617000, 0.9616482029943823600), + ( 1.000000000000000000, 0.2161332762312378500, 0.9612392907122724300) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#391 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#392 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.289692704310184900, 7.187500000000000000 ) ) ; +#393 = ORIENTED_EDGE ( 'NONE', *, *, #2415, .F. ) ; +#394 = EDGE_CURVE ( 'NONE', #1215, #2375, #405, .T. ) ; +#395 = CARTESIAN_POINT ( 'NONE', ( 7.744050055620648200, -1.174531266189121800, 1.456736720811357500 ) ) ; +#396 = CARTESIAN_POINT ( 'NONE', ( 7.126698107400719600, -0.7857612843798521500, 5.656962277626218100 ) ) ; +#397 = APPROVAL_PERSON_ORGANIZATION ( #422, #1664, #2262 ) ; +#398 = ORIENTED_EDGE ( 'NONE', *, *, #229, .T. ) ; +#399 = ADVANCED_FACE ( 'NONE', ( #18 ), #12, .T. ) ; +#400 = CARTESIAN_POINT ( 'NONE', ( 6.922234615672462800, -0.4359526643485561200, 1.079252779867394100 ) ) ; +#401 = AXIS2_PLACEMENT_3D ( 'NONE', #2563, #1752, #79 ) ; +#402 = EDGE_LOOP ( 'NONE', ( #2316, #2499, #1566 ) ) ; +#403 = CARTESIAN_POINT ( 'NONE', ( 7.491736956767845800, -1.017556497632658800, 1.583857442206877200 ) ) ; +#404 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000900, -0.8138997632718861800, 3.692708020441777300 ) ) ; +#405 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1841, #1847, #1854, #1823, #1819, #1815, #1812, #1808, #1807, #1804, #1799, #1796, #1791, #1787, #1781, #1778, #1772, #1766, #1759, #1745 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0002268013626144515900, 0.0005163933332009360000, 0.0008059853037874204100, 0.0009507812890806618000, 0.001095577274373903300, 0.001240373259667144500, 0.001385169244960386100, 0.001674761215546863600, 0.001964353186133341700, 0.002543537127306296800 ), + .UNSPECIFIED. ) ; +#406 = CARTESIAN_POINT ( 'NONE', ( 8.162689283199993500, -1.398206962329382500, 1.315406467182866500 ) ) ; +#407 = CARTESIAN_POINT ( 'NONE', ( 7.852772961680853000, -0.1413851701227834000, 1.371615709262279600 ) ) ; +#408 = CARTESIAN_POINT ( 'NONE', ( 9.637118122904773500, -1.428048074925658100, 0.4152007679521704200 ) ) ; +#409 = EDGE_CURVE ( 'NONE', #603, #1795, #49, .T. ) ; +#410 = CARTESIAN_POINT ( 'NONE', ( 7.240084348142584500, -0.6469456262863180200, 0.8132861667179740500 ) ) ; +#411 = CARTESIAN_POINT ( 'NONE', ( 8.476934860897747700, -1.499999999999997600, 1.264957660359270500 ) ) ; +#412 = CARTESIAN_POINT ( 'NONE', ( 7.632064662265396900, -1.107514553127481000, 1.508287160373917000 ) ) ; +#413 = VERTEX_POINT ( 'NONE', #1679 ) ; +#414 = CARTESIAN_POINT ( 'NONE', ( 9.464597736608215700, -1.375402298156831500, 0.3769192533495575600 ) ) ; +#415 = AXIS2_PLACEMENT_3D ( 'NONE', #1993, #530, #1785 ) ; +#416 = CARTESIAN_POINT ( 'NONE', ( 8.050776377321032100, -0.1424787588517877600, 1.300820900800362200 ) ) ; +#417 = ORIENTED_EDGE ( 'NONE', *, *, #1971, .T. ) ; +#418 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000900, -0.3249748766718524300, 1.267415028125279400 ) ) ; +#419 = FACE_OUTER_BOUND ( 'NONE', #426, .T. ) ; +#420 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #2442, 'distance_accuracy_value', 'NONE'); +#421 = ORIENTED_EDGE ( 'NONE', *, *, #873, .F. ) ; +#422 = PERSON_AND_ORGANIZATION ( #1970, #768 ) ; +#423 = EDGE_LOOP ( 'NONE', ( #939, #1890, #2616 ) ) ; +#424 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1550, #1344, #1414, #2074, #304, #1229, #1330, #698 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( -1.000000000006037400E-005, 0.0008625214553591213900, 0.001298782183038711900, 0.001735042910718302400 ), + .UNSPECIFIED. ) ; +#425 = PERSON_AND_ORGANIZATION ( #1970, #768 ) ; +#426 = EDGE_LOOP ( 'NONE', ( #2237, #1552, #761, #1009 ) ) ; +#427 = CARTESIAN_POINT ( 'NONE', ( 6.234037820247968900, -0.4181579352450385300, 3.595352277648040200 ) ) ; +#428 = EDGE_CURVE ( 'NONE', #1220, #413, #15, .T. ) ; +#429 = EDGE_LOOP ( 'NONE', ( #991, #733, #2578, #1913 ) ) ; +#430 = DIRECTION ( 'NONE', ( 2.602085213965211100E-016, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#431 = ORIENTED_EDGE ( 'NONE', *, *, #826, .T. ) ; +#432 = AXIS2_PLACEMENT_3D ( 'NONE', #2176, #700, #1968 ) ; +#433 = CARTESIAN_POINT ( 'NONE', ( 6.505213034913037500E-016, -2.500000000000003600, 0.0000000000000000000 ) ) ; +#434 = CARTESIAN_POINT ( 'NONE', ( 9.112446933252439200, -1.306513758955660100, 0.3258186400467703000 ) ) ; +#435 = CARTESIAN_POINT ( 'NONE', ( 7.408477594459176500, -0.7593931866159930900, 0.6999307342405591800 ) ) ; +#436 = CARTESIAN_POINT ( 'NONE', ( 6.365846649954297800, -0.5267959145697493900, 4.507024652337489300 ) ) ; +#437 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 1.741936567896977200, 0.0000000000000000000 ) ) ; +#438 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#439 = CARTESIAN_POINT ( 'NONE', ( 7.850815382295766500, -1.235850611471757600, 1.415962512734821700 ) ) ; +#440 = CARTESIAN_POINT ( 'NONE', ( -6.374280101213837000, -0.03594650085741082900, 2.962535915829954000 ) ) ; +#441 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.8416876048223027600, 0.0000000000000000000 ) ) ; +#442 = EDGE_CURVE ( 'NONE', #636, #277, #151, .T. ) ; +#443 = CARTESIAN_POINT ( 'NONE', ( 8.945129561165496000, -1.499999999999997300, 6.251009345674984500 ) ) ; +#444 = CARTESIAN_POINT ( 'NONE', ( 6.192578998272330700, -0.03011826609226417700, 5.402108597512249600 ) ) ; +#445 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000000400, -2.500000000000000400, 7.500000000000000000 ) ) ; +#446 = FACE_OUTER_BOUND ( 'NONE', #584, .T. ) ; +#447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#448 = ORIENTED_EDGE ( 'NONE', *, *, #1194, .F. ) ; +#449 = MANIFOLD_SOLID_BREP ( 'Fillet8', #2607 ) ; +#450 = CARTESIAN_POINT ( 'NONE', ( 8.325493963817766700, -0.09681856550549501600, 1.233093803343770600 ) ) ; +#451 = FACE_OUTER_BOUND ( 'NONE', #488, .T. ) ; +#452 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#453 = EDGE_LOOP ( 'NONE', ( #2278, #2303, #2312, #2339, #2345 ) ) ; +#454 = CARTESIAN_POINT ( 'NONE', ( 9.138351761590158200, -1.499999999999997300, 6.226797915339148800 ) ) ; +#455 = CARTESIAN_POINT ( 'NONE', ( 7.485152036820562000, -0.1071147135069410900, 5.937400889892080300 ) ) ; +#456 = EDGE_LOOP ( 'NONE', ( #1160, #669, #1653, #2315, #1460, #2493, #1347, #483 ) ) ; +#457 = CARTESIAN_POINT ( 'NONE', ( 8.316856316926095600, -1.463439892360986100, 1.282547650348425000 ) ) ; +#458 = CARTESIAN_POINT ( 'NONE', ( -6.749999999999993800, 0.1100301479937692600, 1.020898033750332600 ) ) ; +#459 = CARTESIAN_POINT ( 'NONE', ( -6.750000000000000900, -2.500000000000003100, 7.500000000000000000 ) ) ; +#460 = ORIENTED_EDGE ( 'NONE', *, *, #531, .F. ) ; +#461 = CARTESIAN_POINT ( 'NONE', ( 7.670978458884569300, -0.9198132667363752000, 0.5614437722623906200 ) ) ; +#462 = CARTESIAN_POINT ( 'NONE', ( -6.449121881278388800, -0.1215165150849169300, 2.374532248049383100 ) ) ; +#463 = EDGE_LOOP ( 'NONE', ( #2543, #1116, #1286 ) ) ; +#464 = CARTESIAN_POINT ( 'NONE', ( 7.925430843468262800, -1.277685765625590700, 1.388522145485109100 ) ) ; +#465 = ORIENTED_EDGE ( 'NONE', *, *, #514, .F. ) ; +#466 = CARTESIAN_POINT ( 'NONE', ( -8.783446460146189200, 0.1801171714061849100, 1.207094075954783000 ) ) ; +#467 = EDGE_CURVE ( 'NONE', #611, #1802, #1680, .T. ) ; +#468 = CARTESIAN_POINT ( 'NONE', ( -6.369762118747256200, -1.555747387183597800, -0.0000000000000000000 ) ) ; +#469 = DIRECTION ( 'NONE', ( -4.489794735692378600E-017, -0.2588190451025179100, -0.9659258262890690900 ) ) ; +#470 = CARTESIAN_POINT ( 'NONE', ( -11.25000000000000000, -2.500000000000003100, 7.500000000000000000 ) ) ; +#471 = ADVANCED_FACE ( 'NONE', ( #2240 ), #1708, .F. ) ; +#472 = CARTESIAN_POINT ( 'NONE', ( 8.418967747197950000, -0.07061636851160170400, 1.216964125292898400 ) ) ; +#473 = CARTESIAN_POINT ( 'NONE', ( -6.995829951626758400, -0.02511398328997835300, 1.948945799941268900 ) ) ; +#474 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999999100, 4.659258262890690000, 8.771665475151170500 ) ) ; +#475 = CARTESIAN_POINT ( 'NONE', ( -6.312798085748564600, -0.3368589240223670000, 4.463824216581372200 ) ) ; +#476 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#477 = CARTESIAN_POINT ( 'NONE', ( 7.760517011741825400, -0.9721072046138812300, 0.5202832132553578700 ) ) ; +#478 = CARTESIAN_POINT ( 'NONE', ( -9.637118122915149200, -1.428048074929110500, 0.4152007679546192400 ) ) ; +#479 = EDGE_CURVE ( 'NONE', #582, #1887, #576, .T. ) ; +#480 = CARTESIAN_POINT ( 'NONE', ( 8.079200516305141000, -1.356532417238678300, 1.340327822308099400 ) ) ; +#481 = CARTESIAN_POINT ( 'NONE', ( -7.632064662265359600, -1.107514553127530300, 1.508287160373932700 ) ) ; +#482 = ORIENTED_EDGE ( 'NONE', *, *, #1136, .T. ) ; +#483 = ORIENTED_EDGE ( 'NONE', *, *, #1873, .T. ) ; +#484 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.602085213965211100E-016, 0.0000000000000000000 ) ) ; +#485 = CYLINDRICAL_SURFACE ( 'NONE', #1567, 2.500000000000000000 ) ; +#486 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#487 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.6863786727460831100, 3.865809341118562800 ) ) ; +#488 = EDGE_LOOP ( 'NONE', ( #2249, #2254, #2255, #2271 ) ) ; +#489 = EDGE_LOOP ( 'NONE', ( #525, #2060, #853, #863 ) ) ; +#490 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.9387505004004140800, 3.749999999999984000 ) ) ; +#491 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#492 = VERTEX_POINT ( 'NONE', #1546 ) ; +#493 = ORIENTED_EDGE ( 'NONE', *, *, #1645, .F. ) ; +#494 = ORIENTED_EDGE ( 'NONE', *, *, #794, .F. ) ; +#495 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -2.500000000000003100, 4.999999999999999100 ) ) ; +#496 = CARTESIAN_POINT ( 'NONE', ( 8.591829814332468700, 0.005184324483245851000, 1.198190355109684000 ) ) ; +#497 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#498 = CARTESIAN_POINT ( 'NONE', ( 7.945040619986261100, -1.070665523966454600, 0.4479917384344551100 ) ) ; +#499 = CARTESIAN_POINT ( 'NONE', ( -8.162689283200006000, -1.398206962329391300, 6.184593532817136600 ) ) ; +#500 = CARTESIAN_POINT ( 'NONE', ( 6.531283289548669700, -0.1125400916347753000, 2.041242863847811100 ) ) ; +#501 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#502 = CARTESIAN_POINT ( 'NONE', ( 8.158831423890820400, -1.393764822383573700, 1.319466645283462900 ) ) ; +#503 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -6.501000000000001200, 2.549999999999999400 ) ) ; +#504 = CARTESIAN_POINT ( 'NONE', ( 8.669059211425210500, 0.05745521994344974400, 1.197163964540021800 ) ) ; +#505 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1937, #1705, #239, #2657 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-018, 0.0002720070082493382800 ), + .UNSPECIFIED. ) ; +#506 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999999100, -6.500000000000000900, 7.500000000000000000 ) ) ; +#507 = ADVANCED_FACE ( 'NONE', ( #14 ), #1111, .F. ) ; +#508 = CARTESIAN_POINT ( 'NONE', ( 8.040597708556253700, -1.117206025197080800, 0.4166999628784325800 ) ) ; +#509 = CARTESIAN_POINT ( 'NONE', ( -7.015796647203865500, -0.7173511418790238200, 5.557358989084861800 ) ) ; +#510 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, -0.1725531113855676100, 2.998131433134116500 ) ) ; +#511 = CARTESIAN_POINT ( 'NONE', ( 8.322332627675084600, -1.457901027928980600, 1.285436490488167400 ) ) ; +#512 = CARTESIAN_POINT ( 'NONE', ( -5.748823673678063400, -0.4038098291674575000, 3.887759540769185400 ) ) ; +#513 = EDGE_LOOP ( 'NONE', ( #2477, #2491, #2500, #2514 ) ) ; +#514 = EDGE_CURVE ( 'NONE', #885, #1952, #631, .T. ) ; +#515 = FACE_OUTER_BOUND ( 'NONE', #402, .T. ) ; +#516 = VERTEX_POINT ( 'NONE', #1530 ) ; +#517 = DIRECTION ( 'NONE', ( -2.602085213965211100E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#518 = EDGE_LOOP ( 'NONE', ( #1833, #1863, #1859, #331, #1656, #1678, #1688, #1710, #1723, #1768, #1771, #1793, #1798, #1806, #1820, #1825 ) ) ; +#519 = AXIS2_PLACEMENT_3D ( 'NONE', #2291, #1848, #1872 ) ; +#520 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#521 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.9387505004004153000, 3.749999999999982700 ) ) ; +#522 = CARTESIAN_POINT ( 'NONE', ( -6.341787547819750500, -0.05843129396321071500, 3.066113406597555300 ) ) ; +#523 = EDGE_LOOP ( 'NONE', ( #2107, #2115, #2126, #2143 ) ) ; +#524 = CARTESIAN_POINT ( 'NONE', ( -6.249999984307201800, -0.7006773030259051400, 3.897712998843505100 ) ) ; +#525 = ORIENTED_EDGE ( 'NONE', *, *, #1047, .T. ) ; +#526 = ORIENTED_EDGE ( 'NONE', *, *, #2572, .T. ) ; +#527 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#528 = CARTESIAN_POINT ( 'NONE', ( -8.476934860899485000, -1.500000000000002400, 1.264957660359078000 ) ) ; +#529 = CARTESIAN_POINT ( 'NONE', ( 8.783446460146002700, 0.1801171714062026200, 1.207094075954831900 ) ) ; +#530 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#531 = EDGE_CURVE ( 'NONE', #1209, #603, #2305, .T. ) ; +#532 = CARTESIAN_POINT ( 'NONE', ( 8.236799153322831300, -1.197376287693610700, 0.3656547407790132200 ) ) ; +#533 = ADVANCED_FACE ( 'NONE', ( #1623 ), #2656, .F. ) ; +#534 = CARTESIAN_POINT ( 'NONE', ( 8.405378661242878000, -1.484463526201648800, 1.272400534022888100 ) ) ; +#535 = CARTESIAN_POINT ( 'NONE', ( -6.601089278863487800, 0.01506555848606999000, 2.466719389825050800 ) ) ; +#536 = CARTESIAN_POINT ( 'NONE', ( 9.795704756372451500, -1.499999999999997300, 7.038750000000003800 ) ) ; +#537 = CARTESIAN_POINT ( 'NONE', ( 8.813732347348624400, 0.2496837068187268400, 1.218848887804057800 ) ) ; +#538 = CARTESIAN_POINT ( 'NONE', ( -6.750000000000001800, -2.500000000000003100, 4.999999999999999100 ) ) ; +#539 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1436, #2324, #2120 ), + ( #31, #1268, #1487 ), + ( #2529, #1064, #2333 ), + ( #856, #2130, #654 ), + ( #1920, #466, #1700 ), + ( #231, #1278, #40 ), + ( #67, #1304, #2541 ), + ( #1087, #2358, #875 ), + ( #2148, #676, #1939 ), + ( #481, #1725, #257 ), + ( #1508, #53, #1295 ), + ( #2534, #1073, #2347 ), + ( #867, #2137, #664 ), + ( #1933, #473, #1709 ), + ( #245, #1498, #1269 ), + ( #2172, #236, #1999 ), + ( #732, #535, #1057 ), + ( #1483, #644, #925 ), + ( #30, #39, #1497 ), + ( #1063, #440, #1060 ), + ( #1981, #522, #1776 ), + ( #306, #1558, #101 ), + ( #1337, #2577, #1120 ), + ( #2396, #917, #2184 ), + ( #713, #1977, #512 ), + ( #1767, #299, #1547 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -2.710505431213761100E-020, 0.0003117651199006418000, 0.0006235302398012836100, 0.0009352953597019254100, 0.001247060479602567200, 0.001870590719403850800, 0.002494120959205134400, 0.003117651199006418000, 0.003429416318907059800, 0.003741181438807701700, 0.004052946558708343500, 0.004364711678608985300, 0.004988241918410268900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.2499999999999982800, 1.000000000000000000), + ( 1.000000000000000000, 0.2499760950583539100, 1.000000000000000000), + ( 1.000000000000000000, 0.2545484055413476100, 1.000000000000000000), + ( 1.000000000000000000, 0.2704677616995389000, 1.000000000000000000), + ( 1.000000000000000000, 0.2817695917743114900, 1.000000000000000000), + ( 1.000000000000000000, 0.3084315763333844700, 1.000000000000000000), + ( 1.000000000000000000, 0.3236487628465620800, 1.000000000000000000), + ( 1.000000000000000000, 0.3554114645799063600, 1.000000000000000000), + ( 1.000000000000000000, 0.3720577744228116800, 1.000000000000000000), + ( 1.000000000000000000, 0.4228250297225112900, 1.000000000000000000), + ( 1.000000000000000000, 0.4580224156111680800, 1.000000000000000000), + ( 1.000000000000000000, 0.5253830961242166300, 1.000000000000000000), + ( 1.000000000000000000, 0.5575090605479211500, 1.000000000000000000), + ( 1.000000000000000000, 0.6166529525239437000, 1.000000000000000000), + ( 1.000000000000000000, 0.6439460129195497800, 1.000000000000000000), + ( 1.000000000000000000, 0.6772031439453766200, 1.000000000000000000), + ( 1.000000000000000000, 0.6870934825343618700, 1.000000000000000000), + ( 1.000000000000000000, 0.7041608022264530500, 1.000000000000000000), + ( 1.000000000000000000, 0.7112385613050044000, 1.000000000000000000), + ( 1.000000000000000000, 0.7219798917371879100, 1.000000000000000000), + ( 1.000000000000000000, 0.7257212178203322800, 1.000000000000000000), + ( 1.000000000000000000, 0.7298933834737717500, 1.000000000000000000), + ( 1.000000000000000000, 0.7302798788495360500, 1.000000000000000000), + ( 1.000000000000000000, 0.7266576654487192400, 1.000000000000000000), + ( 1.000000000000000000, 0.7178969860314756700, 1.000000000000000000), + ( 1.000000000000000000, 0.7053563207170267000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#540 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, -0.7143553551972508000, 3.930166070715293400 ) ) ; +#541 = EDGE_LOOP ( 'NONE', ( #1427, #2147, #1756, #1015 ) ) ; +#542 = CARTESIAN_POINT ( 'NONE', ( -11.25000000000000000, -2.500000000000003100, 2.500000000000000000 ) ) ; +#543 = EDGE_CURVE ( 'NONE', #2375, #967, #1463, .T. ) ; +#544 = CARTESIAN_POINT ( 'NONE', ( 8.336454393324398600, -1.230579405799707500, 0.3461007956413738600 ) ) ; +#545 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#546 = EDGE_LOOP ( 'NONE', ( #1082, #1085, #1125, #1149, #1153, #1162 ) ) ; +#547 = ORIENTED_EDGE ( 'NONE', *, *, #1061, .F. ) ; +#548 = CARTESIAN_POINT ( 'NONE', ( 8.574901629589410500, -1.521432396483620300, 1.254683679046606900 ) ) ; +#549 = VERTEX_POINT ( 'NONE', #1062 ) ; +#550 = CARTESIAN_POINT ( 'NONE', ( 8.816895208396520200, 0.3651201720969583000, 1.240947587835403500 ) ) ; +#551 = CARTESIAN_POINT ( 'NONE', ( -10.20428321074607900, -1.500000000000002700, 0.9171073006313731300 ) ) ; +#552 = EDGE_LOOP ( 'NONE', ( #2476, #1447, #2640, #2613, #2609 ) ) ; +#553 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000000400, -2.500000000000000400, 0.0000000000000000000 ) ) ; +#554 = CARTESIAN_POINT ( 'NONE', ( 8.539881955674349700, -1.276790497556878500, 0.3195255239628699300 ) ) ; +#555 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.4526175258723708100, 3.485560460712819900 ) ) ; +#556 = EDGE_LOOP ( 'NONE', ( #2021, #2030, #2086, #2089 ) ) ; +#557 = ORIENTED_EDGE ( 'NONE', *, *, #1560, .F. ) ; +#558 = CARTESIAN_POINT ( 'NONE', ( 8.661387073916193600, -1.531754153874188600, 1.249999999999999100 ) ) ; +#559 = ADVANCED_FACE ( 'NONE', ( #451 ), #2111, .T. ) ; +#560 = CARTESIAN_POINT ( 'NONE', ( 8.786756602809621300, 0.4047374712929748800, 1.249999991491119100 ) ) ; +#561 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.500000000000002400, 6.251009345674985300 ) ) ; +#562 = CARTESIAN_POINT ( 'NONE', ( -9.637118122904773500, -1.428048074925663700, 7.084799232047831900 ) ) ; +#563 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#564 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1443, #1456, #1336 ), + ( #1154, #1332, #1273 ), + ( #1323, #1310, #1420 ), + ( #1201, #1267, #1266 ), + ( #1230, #1177, #1222 ), + ( #1166, #1132, #1228 ), + ( #1017, #1104, #1140 ), + ( #1401, #1138, #1080 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0006277702842063089200, 0.0009416554263094634300, 0.001255540568412617800 ), + ( 0.02472404307544078300, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 0.9638308528458332500, 0.2685430323065793300, 1.000000000000000000), + ( 0.9638307329100082000, 0.2685406068168491000, 1.000000000000000000), + ( 0.9636093843502386800, 0.2640642240688101400, 1.000000000000000000), + ( 0.9629438464160029500, 0.2506048976106531900, 1.000000000000000000), + ( 0.9626704259402147900, 0.2450754525487357200, 1.000000000000000000), + ( 0.9620244979394889700, 0.2320127022785868100, 1.000000000000000000), + ( 0.9616482029943826900, 0.2244028032026541800, 1.000000000000000000), + ( 0.9612392907122729900, 0.2161332762312373200, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#565 = EDGE_CURVE ( 'NONE', #1128, #2606, #1046, .T. ) ; +#566 = AXIS2_PLACEMENT_3D ( 'NONE', #2284, #811, #2073 ) ; +#567 = CARTESIAN_POINT ( 'NONE', ( 8.643664488573389100, -1.289692692354176900, 0.3125000066150595600 ) ) ; +#568 = EDGE_CURVE ( 'NONE', #1570, #1475, #2181, .T. ) ; +#569 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.531754163448149100, 1.249999999999999100 ) ) ; +#570 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.602085213965210100E-016, 0.0000000000000000000 ) ) ; +#571 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -6.501000000000001200, 4.950000000000000200 ) ) ; +#572 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.734723475976807100E-016, 0.0000000000000000000 ) ) ; +#573 = ADVANCED_FACE ( 'NONE', ( #1478 ), #988, .F. ) ; +#574 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, 0.4047375096555646000, 1.249999999999999300 ) ) ; +#575 = VERTEX_POINT ( 'NONE', #948 ) ; +#576 = CIRCLE ( 'NONE', #2092, 2.500000000000000000 ) ; +#577 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.4526175258723735800, 4.014439539287099700 ) ) ; +#578 = CARTESIAN_POINT ( 'NONE', ( 7.670978458884543500, -0.9198132667363592100, 6.938556227737594300 ) ) ; +#579 = ORIENTED_EDGE ( 'NONE', *, *, #781, .F. ) ; +#580 = EDGE_CURVE ( 'NONE', #516, #2253, #922, .T. ) ; +#581 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -2.500000000000001300, 2.500000000000000400 ) ) ; +#582 = VERTEX_POINT ( 'NONE', #937 ) ; +#583 = SHAPE_DEFINITION_REPRESENTATION ( #2591, #688 ) ; +#584 = EDGE_LOOP ( 'NONE', ( #821, #608, #834, #617 ) ) ; +#585 = ADVANCED_FACE ( 'NONE', ( #515 ), #2579, .F. ) ; +#586 = ORIENTED_EDGE ( 'NONE', *, *, #639, .T. ) ; +#587 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999881000, -0.4911800329089405800, 4.082654036551548200 ) ) ; +#588 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2562, #1165, #711, #1556, #562, #623 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.0005419214317906200800, 0.001083842863581240200 ), + .UNSPECIFIED. ) ; +#589 = CARTESIAN_POINT ( 'NONE', ( 8.783446460146406000, 0.1801171714064234400, 6.292905924045261800 ) ) ; +#590 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#591 = EDGE_LOOP ( 'NONE', ( #2373, #710, #956 ) ) ; +#592 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000900, -0.4525655145308883400, 4.014478972827975900 ) ) ; +#593 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#594 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.289692704310186000, 0.3124999999999990000 ) ) ; +#595 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.531754163448148200, 6.250000000000000000 ) ) ; +#596 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.734723475976807100E-016, 0.0000000000000000000 ) ) ; +#597 = CARTESIAN_POINT ( 'NONE', ( 6.805591046177085900, -0.6009693411969817500, 5.329023752303762700 ) ) ; +#598 = EDGE_CURVE ( 'NONE', #2274, #1178, #2632, .T. ) ; +#599 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#600 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.05672885952164374900, 4.397493853157382800 ) ) ; +#601 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.4611422822719243900, 3.474780947575873300 ) ) ; +#602 = PLANE ( 'NONE', #1107 ) ; +#603 = VERTEX_POINT ( 'NONE', #930 ) ; +#604 = VECTOR ( 'NONE', #2503, 1000.000000000000000 ) ; +#605 = EDGE_LOOP ( 'NONE', ( #493, #2053, #244, #1896, #738, #1524 ) ) ; +#606 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#607 = CARTESIAN_POINT ( 'NONE', ( 8.932939833526173600, -1.289692704310186500, 0.3124999999999989500 ) ) ; +#608 = ORIENTED_EDGE ( 'NONE', *, *, #159, .F. ) ; +#609 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000001800, -0.07463715628736426700, 5.901300236776013900 ) ) ; +#610 = LINE ( 'NONE', #2519, #604 ) ; +#611 = VERTEX_POINT ( 'NONE', #846 ) ; +#612 = EDGE_CURVE ( 'NONE', #1178, #2414, #1554, .T. ) ; +#613 = CARTESIAN_POINT ( 'NONE', ( 7.877805360823324500, -1.254266687044447400, 1.402350950526332300 ) ) ; +#614 = AXIS2_PLACEMENT_3D ( 'NONE', #147, #2435, #1612 ) ; +#615 = VECTOR ( 'NONE', #2511, 1000.000000000000000 ) ; +#616 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -2.500000000000001300, 4.999999999999999100 ) ) ; +#617 = ORIENTED_EDGE ( 'NONE', *, *, #1019, .F. ) ; +#618 = AXIS2_PLACEMENT_3D ( 'NONE', #2235, #2205, #1342 ) ; +#619 = EDGE_LOOP ( 'NONE', ( #1186, #1380, #2064, #740 ) ) ; +#620 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.9387505004004165200, 3.749999999999981800 ) ) ; +#621 = CARTESIAN_POINT ( 'NONE', ( -6.333307644926430900, -0.2768100308281515900, 4.583238400706202100 ) ) ; +#622 = CARTESIAN_POINT ( 'NONE', ( 5.761035676898192300, -0.2698434879239373100, 3.841022715869032700 ) ) ; +#623 = CARTESIAN_POINT ( 'NONE', ( -9.795704756359207000, -1.500000000000002700, 7.038750000006800200 ) ) ; +#624 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#625 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000000, -6.500000000000000900, 2.500000000000000400 ) ) ; +#626 = CARTESIAN_POINT ( 'NONE', ( 6.374280101213945400, -0.03594650085737242900, 4.537464084170296500 ) ) ; +#627 = EDGE_LOOP ( 'NONE', ( #1236, #1244, #1248, #1252, #1256, #1279, #1294, #1320, #1329, #1355, #1363, #1393, #1395, #1409 ) ) ; +#628 = VECTOR ( 'NONE', #593, 1000.000000000000000 ) ; +#629 = ORIENTED_EDGE ( 'NONE', *, *, #1014, .T. ) ; +#630 = LINE ( 'NONE', #2603, #615 ) ; +#631 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1466, #1505, #1482, #1448, #1435, #1430, #1424, #1408, #1402, #1394, #1383, #1377 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0009294479875822108000, 0.001558812979882916900, 0.002188177972183623000, 0.002817542964484329300, 0.003132225460634682500, 0.003446907956785035700 ), + .UNSPECIFIED. ) ; +#632 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000000, -2.500000000000001300, 7.500000000000000000 ) ) ; +#633 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, -0.4911800329090564300, 3.417345963448311400 ) ) ; +#634 = ORIENTED_EDGE ( 'NONE', *, *, #2325, .F. ) ; +#635 = CYLINDRICAL_SURFACE ( 'NONE', #1946, 2.500000000000002200 ) ; +#636 = VERTEX_POINT ( 'NONE', #804 ) ; +#637 = CARTESIAN_POINT ( 'NONE', ( -6.267176751789171400, -0.5363319534915147500, 4.142669375281444700 ) ) ; +#638 = CARTESIAN_POINT ( 'NONE', ( 6.618815831353415100, -0.5240946160488291200, 5.059739064815571100 ) ) ; +#639 = EDGE_CURVE ( 'NONE', #1802, #1441, #384, .T. ) ; +#640 = ORIENTED_EDGE ( 'NONE', *, *, #2618, .T. ) ; +#641 = ORIENTED_EDGE ( 'NONE', *, *, #2536, .T. ) ; +#642 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#643 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000122600, -0.1725531113857322100, 4.501868566865986100 ) ) ; +#644 = CARTESIAN_POINT ( 'NONE', ( -6.497972648085901200, 0.006132037403164474800, 2.659280560384539500 ) ) ; +#645 = AXIS2_PLACEMENT_3D ( 'NONE', #1836, #2469, #1000 ) ; +#646 = CARTESIAN_POINT ( 'NONE', ( -11.25000000000000000, -2.500000000000003100, 4.999999999999999100 ) ) ; +#647 = CARTESIAN_POINT ( 'NONE', ( 7.240084348142699100, -0.6469456262863253500, 6.686713833282031900 ) ) ; +#648 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.8700100493312458200, 0.4930339887499069500 ) ) ; +#649 = CARTESIAN_POINT ( 'NONE', ( -6.511923749374665800, -1.968789707185300700, 7.500000000000000900 ) ) ; +#650 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#651 = CARTESIAN_POINT ( 'NONE', ( -6.685538098314665900, -0.2123758909476206900, 1.466107717391973700 ) ) ; +#652 = EDGE_CURVE ( 'NONE', #1382, #603, #2513, .T. ) ; +#653 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.2552283350445011500, 5.013110027686941800 ) ) ; +#654 = CARTESIAN_POINT ( 'NONE', ( -8.336454393324384400, -1.230579405799662200, 0.3461007956414005000 ) ) ; +#655 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 1.084202172485504400E-015, 7.500000000000000000 ) ) ; +#656 = AXIS2_PLACEMENT_3D ( 'NONE', #769, #2032, #570 ) ; +#657 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 1.249999999999999600, 0.0000000000000000000 ) ) ; +#658 = EDGE_LOOP ( 'NONE', ( #1573, #1956, #1960, #1964 ) ) ; +#659 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#660 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.2459239244881140900, 1.260696868135224900 ) ) ; +#661 = CYLINDRICAL_SURFACE ( 'NONE', #1227, 2.500000000000000400 ) ; +#662 = ORIENTED_EDGE ( 'NONE', *, *, #141, .F. ) ; +#663 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#664 = CARTESIAN_POINT ( 'NONE', ( -6.773355676992435000, -0.3374639131592185300, 1.230879182455710600 ) ) ; +#665 = ORIENTED_EDGE ( 'NONE', *, *, #2118, .T. ) ; +#666 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000000, -6.500000000000000900, 7.500000000000000000 ) ) ; +#667 = CIRCLE ( 'NONE', #2139, 0.4999999999999998300 ) ; +#668 = CARTESIAN_POINT ( 'NONE', ( -6.449117804056364800, -0.1215186784077827200, 5.125450490417077500 ) ) ; +#669 = ORIENTED_EDGE ( 'NONE', *, *, #858, .T. ) ; +#670 = CARTESIAN_POINT ( 'NONE', ( -6.750000000000000900, -0.3249748766718739700, 6.232584971874740800 ) ) ; +#671 = CYLINDRICAL_SURFACE ( 'NONE', #2006, 2.500000000000000000 ) ; +#672 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000000, -2.500000000000001300, 2.500000000000000400 ) ) ; +#673 = VERTEX_POINT ( 'NONE', #756 ) ; +#674 = EDGE_CURVE ( 'NONE', #2045, #1389, #1410, .T. ) ; +#675 = ORIENTED_EDGE ( 'NONE', *, *, #1159, .T. ) ; +#676 = CARTESIAN_POINT ( 'NONE', ( -8.325493963817461200, -0.09681856550516826400, 1.233093803343844800 ) ) ; +#677 = CARTESIAN_POINT ( 'NONE', ( -9.724914359541211100, -1.879060172822371300, 1.447210965290129700 ) ) ; +#678 = DIRECTION ( 'NONE', ( 2.602085213965211600E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#679 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.839107728028796700E-016, 0.0000000000000000000 ) ) ; +#680 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#681 = DIRECTION ( 'NONE', ( 4.489794735692378600E-017, 0.2588190451025179100, -0.9659258262890690900 ) ) ; +#682 = CARTESIAN_POINT ( 'NONE', ( 6.749999999999980500, -0.3249748766718592000, 6.232584971874715100 ) ) ; +#683 = AXIS2_PLACEMENT_3D ( 'NONE', #1130, #934, #2398 ) ; +#684 = CARTESIAN_POINT ( 'NONE', ( -6.531283289548646600, -0.1125400916347648700, 5.458757136152186700 ) ) ; +#685 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -2.500000000000001300, 2.500000000000000400 ) ) ; +#686 = CARTESIAN_POINT ( 'NONE', ( 8.476934860899485000, -1.499999999999997600, 6.235042339640919800 ) ) ; +#687 = CARTESIAN_POINT ( 'NONE', ( -6.312802380916138200, -0.3368464426229148500, 3.036150900396674700 ) ) ; +#688 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trigger_Guide', ( #449, #1779 ), #1911 ) ; +#689 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.2920992887518967800, 5.144906831900644100 ) ) ; +#690 = EDGE_CURVE ( 'NONE', #1531, #807, #2046, .T. ) ; +#691 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2170, #2597, #2594 ), + ( #2340, #2452, #2471 ), + ( #1646, #779, #2447 ), + ( #193, #2424, #2395 ), + ( #2272, #2293, #2250 ), + ( #2200, #2225, #327 ), + ( #1959, #2040, #2026 ), + ( #1990, #139, #1849 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0006277702842063099000, 0.0009416554263094648400, 0.001255540568412619800 ), + ( 0.02472404307544300400, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 0.9638308528458301400, 0.2685430323065820500, 1.000000000000000000), + ( 0.9638307329100049800, 0.2685406068168523800, 1.000000000000000000), + ( 0.9636093843502355800, 0.2640642240688124100, 1.000000000000000000), + ( 0.9629438464159997300, 0.2506048976106555200, 1.000000000000000000), + ( 0.9626704259402104600, 0.2450754525487173200, 1.000000000000000000), + ( 0.9620244979394867400, 0.2320127022786108200, 1.000000000000000000), + ( 0.9616482029943785900, 0.2244028032026394200, 1.000000000000000000), + ( 0.9612392907122696600, 0.2161332762312397600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#692 = AXIS2_PLACEMENT_3D ( 'NONE', #1115, #2413, #943 ) ; +#693 = ORIENTED_EDGE ( 'NONE', *, *, #97, .F. ) ; +#694 = CARTESIAN_POINT ( 'NONE', ( -8.476934860897740600, -1.500000000000002400, 6.235042339640729700 ) ) ; +#695 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.3371697310610706800, 2.083990216784134700 ) ) ; +#696 = AXIS2_PLACEMENT_3D ( 'NONE', #1144, #1365, #2624 ) ; +#697 = CIRCLE ( 'NONE', #1583, 2.500000000000000000 ) ; +#698 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.8416876048223027600, 7.500000000000000000 ) ) ; +#699 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.1014633329783834900, 4.629021591470595000 ) ) ; +#700 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#701 = VERTEX_POINT ( 'NONE', #712 ) ; +#702 = ORIENTED_EDGE ( 'NONE', *, *, #652, .T. ) ; +#703 = CARTESIAN_POINT ( 'NONE', ( -6.379113388733680200, -0.1950268931177272200, 4.807258860840762300 ) ) ; +#704 = FACE_OUTER_BOUND ( 'NONE', #2090, .T. ) ; +#705 = ORIENTED_EDGE ( 'NONE', *, *, #2604, .T. ) ; +#706 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999999100, 4.665063509461087500, 8.749999999999982200 ) ) ; +#707 = FACE_OUTER_BOUND ( 'NONE', #591, .T. ) ; +#708 = CARTESIAN_POINT ( 'NONE', ( -7.361368434619881100, -0.9340802624720913000, 5.834055732254153500 ) ) ; +#709 = ORIENTED_EDGE ( 'NONE', *, *, #374, .F. ) ; +#710 = ORIENTED_EDGE ( 'NONE', *, *, #1707, .T. ) ; +#711 = CARTESIAN_POINT ( 'NONE', ( -9.112446933252440900, -1.306513758955665000, 7.174181359953232500 ) ) ; +#712 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -6.500000000000000900, 4.950000000000000200 ) ) ; +#713 = CARTESIAN_POINT ( 'NONE', ( -6.249019673119432700, -0.8230389033604179600, 3.633497320006816400 ) ) ; +#714 = EDGE_CURVE ( 'NONE', #2253, #1647, #1916, .T. ) ; +#715 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.602085213965208200E-016, 0.0000000000000000000 ) ) ; +#716 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#717 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.01466041860294540300, 5.093291458711397500 ) ) ; +#718 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.1887085033111762500, 1.402250983098022100 ) ) ; +#719 = DIRECTION ( 'NONE', ( -2.602085213965211100E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#720 = CARTESIAN_POINT ( 'NONE', ( -6.453374369304732700, -0.1299222254216480200, 5.137529670843340700 ) ) ; +#721 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999999100, -5.000000000000000900, 0.0000000000000000000 ) ) ; +#722 = CARTESIAN_POINT ( 'NONE', ( -8.750000000000000000, -1.500000000000002400, 3.750000000000000000 ) ) ; +#723 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -2.500000000000003100, 0.0000000000000000000 ) ) ; +#724 = ADVANCED_FACE ( 'NONE', ( #234 ), #784, .F. ) ; +#725 = EDGE_LOOP ( 'NONE', ( #1969, #1989, #1996, #2015 ) ) ; +#726 = EDGE_CURVE ( 'NONE', #492, #1178, #2461, .T. ) ; +#727 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1867, #1011, #1650, #191, #1431, #2651, #1214, #2479, #1006, #2270, #805, #2068, #601, #1858, #404, #2516 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0004121052017981382200, 0.0008242104035962764300, 0.001236315605394414500, 0.001648420807192552900, 0.002472631210788828100, 0.002884736412586966100, 0.003296841614385103600 ), + .UNSPECIFIED. ) ; +#728 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#729 = VECTOR ( 'NONE', #936, 1000.000000000000000 ) ; +#730 = ORIENTED_EDGE ( 'NONE', *, *, #467, .F. ) ; +#731 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.3449276475089154100, 5.555441110852021000 ) ) ; +#732 = CARTESIAN_POINT ( 'NONE', ( -6.574736491086497400, -0.5113435167108498800, 2.514722141656966900 ) ) ; +#733 = ORIENTED_EDGE ( 'NONE', *, *, #2460, .F. ) ; +#734 = AXIS2_PLACEMENT_3D ( 'NONE', #1988, #527, #1782 ) ; +#735 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.500000000000002400, 6.251009345674985300 ) ) ; +#736 = LINE ( 'NONE', #194, #763 ) ; +#737 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999999100, 4.156751133619650300, 10.64704761275629600 ) ) ; +#738 = ORIENTED_EDGE ( 'NONE', *, *, #1635, .T. ) ; +#739 = CIRCLE ( 'NONE', #2036, 2.291287847477919000 ) ; +#740 = ORIENTED_EDGE ( 'NONE', *, *, #2101, .T. ) ; +#741 = VERTEX_POINT ( 'NONE', #625 ) ; +#742 = CARTESIAN_POINT ( 'NONE', ( -8.476934860897740600, -1.500000000000002400, 6.235042339640729700 ) ) ; +#743 = CARTESIAN_POINT ( 'NONE', ( -8.945129561166750100, -1.500000000000002900, 6.251009345674987100 ) ) ; +#744 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#745 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 4.156751133619649400, 10.64704761275629600 ) ) ; +#746 = EDGE_CURVE ( 'NONE', #2112, #1178, #1755, .T. ) ; +#747 = AXIS2_PLACEMENT_3D ( 'NONE', #1105, #2378, #907 ) ; +#748 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#749 = AXIS2_PLACEMENT_3D ( 'NONE', #1760, #295, #1542 ) ; +#750 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.02688862559442811000, 5.212525131438722400 ) ) ; +#751 = CARTESIAN_POINT ( 'NONE', ( -10.19703311092668900, -1.500000000000002900, 1.063594524496843200 ) ) ; +#752 = CARTESIAN_POINT ( 'NONE', ( -9.138351761592638000, -1.500000000000002700, 6.226797915338790900 ) ) ; +#753 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#754 = ADVANCED_FACE ( 'NONE', ( #791 ), #1965, .T. ) ; +#755 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000000400, -5.000000000000000900, 7.500000000000000000 ) ) ; +#756 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -6.500000000000001800, 0.0000000000000000000 ) ) ; +#757 = CARTESIAN_POINT ( 'NONE', ( -9.427914811167896800, -1.500000000000002400, 6.187262926016314800 ) ) ; +#758 = CARTESIAN_POINT ( 'NONE', ( 6.750000000000000900, -2.500000000000001800, 4.999999999999999100 ) ) ; +#759 = EDGE_LOOP ( 'NONE', ( #1043, #1074 ) ) ; +#760 = LINE ( 'NONE', #2109, #1949 ) ; +#761 = ORIENTED_EDGE ( 'NONE', *, *, #255, .F. ) ; +#762 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#763 = VECTOR ( 'NONE', #1216, 1000.000000000000000 ) ; +#764 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000001800, -0.8469602734022965200, 3.676030934106659500 ) ) ; +#765 = EDGE_LOOP ( 'NONE', ( #1607, #1631, #1651, #1921 ) ) ; +#766 = ADVANCED_FACE ( 'NONE', ( #1176 ), #114, .F. ) ; +#767 = CARTESIAN_POINT ( 'NONE', ( -6.478808769809454300, -0.1181618869076271500, 5.245128327611809000 ) ) ; +#768 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#769 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -1.499999999999997600, 3.750000000000000000 ) ) ; +#770 = ORIENTED_EDGE ( 'NONE', *, *, #2016, .T. ) ; +#771 = CARTESIAN_POINT ( 'NONE', ( -9.524441295965317500, -1.500000000000002000, 6.174141307332701200 ) ) ; +#772 = FACE_BOUND ( 'NONE', #350, .T. ) ; +#773 = VERTEX_POINT ( 'NONE', #117 ) ; +#774 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.3371697310611333500, 5.416009783215855600 ) ) ; +#775 = ORIENTED_EDGE ( 'NONE', *, *, #982, .F. ) ; +#776 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.02515241365661596100, 5.448505267104848400 ) ) ; +#777 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1648, #607, #434, #414, #408, #266 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.0005419214317906208400, 0.001083842863581241700 ), + .UNSPECIFIED. ) ; +#778 = CARTESIAN_POINT ( 'NONE', ( 7.850815382295735400, -1.235850611471744000, 6.084037487265164600 ) ) ; +#779 = CARTESIAN_POINT ( 'NONE', ( 9.444530684304412600, 0.2313500262490694500, 1.216355609812113100 ) ) ; +#780 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.1100301479937532300, 6.479101966249690000 ) ) ; +#781 = EDGE_CURVE ( 'NONE', #1441, #773, #2434, .T. ) ; +#782 = ADVANCED_FACE ( 'NONE', ( #1239 ), #485, .F. ) ; +#783 = AXIS2_PLACEMENT_3D ( 'NONE', #1941, #484, #678 ) ; +#784 = PLANE ( 'NONE', #1817 ) ; +#785 = EDGE_CURVE ( 'NONE', #2634, #2266, #697, .T. ) ; +#786 = CARTESIAN_POINT ( 'NONE', ( 8.336454393324316900, -1.230579405799644000, 7.153899204358588700 ) ) ; +#787 = CARTESIAN_POINT ( 'NONE', ( -9.719035299133192800, -1.500000000000002400, 6.163880027183143500 ) ) ; +#788 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999978700, -0.9387505004004305100, 3.750000000000160300 ) ) ; +#789 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#790 = ORIENTED_EDGE ( 'NONE', *, *, #950, .T. ) ; +#791 = FACE_OUTER_BOUND ( 'NONE', #935, .T. ) ; +#792 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#793 = EDGE_LOOP ( 'NONE', ( #964, #987, #1018, #1026 ) ) ; +#794 = EDGE_CURVE ( 'NONE', #1215, #1983, #1317, .T. ) ; +#795 = CARTESIAN_POINT ( 'NONE', ( -9.818472803532460000, -1.500000000000001800, 6.166661178192488700 ) ) ; +#796 = CARTESIAN_POINT ( 'NONE', ( 6.535903699187946000, -0.4990157681384518300, 4.922344816908626800 ) ) ; +#797 = EDGE_LOOP ( 'NONE', ( #357, #629, #362, #641, #393, #1093, #665, #417, #1112, #1851, #675, #431, #702, #460, #709, #482 ) ) ; +#798 = CIRCLE ( 'NONE', #37, 0.5000000000000000000 ) ; +#799 = CARTESIAN_POINT ( 'NONE', ( -8.750000000000000000, -6.501000000000001200, 4.949999999999999300 ) ) ; +#800 = ORIENTED_EDGE ( 'NONE', *, *, #467, .T. ) ; +#801 = AXIS2_PLACEMENT_3D ( 'NONE', #249, #1501, #42 ) ; +#802 = VECTOR ( 'NONE', #1652, 1000.000000000000000 ) ; +#803 = CARTESIAN_POINT ( 'NONE', ( -9.959741346695487600, -1.500000000000002900, 6.204389224667729700 ) ) ; +#804 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.8416876048223027600, 7.500000000000000000 ) ) ; +#805 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000900, -0.05672885412860894500, 3.102506153662145200 ) ) ; +#806 = CARTESIAN_POINT ( 'NONE', ( -10.00472517856309700, -1.500000000000002900, 6.222332133970606800 ) ) ; +#807 = VERTEX_POINT ( 'NONE', #10 ) ; +#808 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#809 = CARTESIAN_POINT ( 'NONE', ( -11.03959828868358400, -0.1521428184594042500, 1.875796849053335400 ) ) ; +#810 = EDGE_CURVE ( 'NONE', #1856, #701, #1822, .T. ) ; +#811 = DIRECTION ( 'NONE', ( 2.602085213965211100E-016, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#812 = CARTESIAN_POINT ( 'NONE', ( -10.08823165211496300, -1.500000000000002700, 6.274686019949865700 ) ) ; +#813 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.1887085033108856200, 6.097749016902271900 ) ) ; +#814 = CARTESIAN_POINT ( 'NONE', ( -10.19066261346733300, -1.747974708760581300, 0.6002765476275948600 ) ) ; +#815 = EDGE_CURVE ( 'NONE', #2439, #2445, #2374, .T. ) ; +#816 = CARTESIAN_POINT ( 'NONE', ( -10.12484963803511000, -1.500000000000002900, 6.308487707907771900 ) ) ; +#817 = EDGE_LOOP ( 'NONE', ( #2155, #1272, #1994 ) ) ; +#818 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#819 = LINE ( 'NONE', #977, #729 ) ; +#820 = CARTESIAN_POINT ( 'NONE', ( -10.17941553452147500, -1.500000000000002900, 6.389291393407507500 ) ) ; +#821 = ORIENTED_EDGE ( 'NONE', *, *, #2016, .F. ) ; +#822 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#823 = CIRCLE ( 'NONE', #5, 0.5000000000000000000 ) ; +#824 = CARTESIAN_POINT ( 'NONE', ( 6.259196403375554500, -0.7158747907998613800, 4.019015143025432800 ) ) ; +#825 = EDGE_LOOP ( 'NONE', ( #1884, #730 ) ) ; +#826 = EDGE_CURVE ( 'NONE', #2011, #1382, #2077, .T. ) ; +#827 = CARTESIAN_POINT ( 'NONE', ( 6.749999999999980500, -0.3249748766718592000, 6.232584971874715100 ) ) ; +#828 = AXIS2_PLACEMENT_3D ( 'NONE', #1703, #878, #2153 ) ; +#829 = CYLINDRICAL_SURFACE ( 'NONE', #2227, 1.199999999999999700 ) ; +#830 = ORIENTED_EDGE ( 'NONE', *, *, #2000, .F. ) ; +#831 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.06440818146711190000, 4.739302041877956600 ) ) ; +#832 = LINE ( 'NONE', #1976, #215 ) ; +#833 = AXIS2_PLACEMENT_3D ( 'NONE', #1297, #892, #2537 ) ; +#834 = ORIENTED_EDGE ( 'NONE', *, *, #1302, .T. ) ; +#835 = CARTESIAN_POINT ( 'NONE', ( -10.19703311092948400, -1.500000000000002700, 6.436405475512868800 ) ) ; +#836 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -2.500000000000001300, 4.999999999999999100 ) ) ; +#837 = EDGE_LOOP ( 'NONE', ( #1182, #1207, #1211, #1218 ) ) ; +#838 = CARTESIAN_POINT ( 'NONE', ( 5.998250311278313000, 0.002136308605185229100, 4.936810844233168200 ) ) ; +#839 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.499999999999997600, 1.248990654325015800 ) ) ; +#840 = CARTESIAN_POINT ( 'NONE', ( -9.659685017421207200, -1.811559494638935500, 1.419609920496231100 ) ) ; +#841 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000000, -6.500000000000000900, 4.999999999999999100 ) ) ; +#842 = CARTESIAN_POINT ( 'NONE', ( 6.847020099932837700, 0.0002736713339511702800, 5.391712233873724900 ) ) ; +#843 = CARTESIAN_POINT ( 'NONE', ( -10.20929721291183300, -1.500000000000003100, 6.533114500486504100 ) ) ; +#844 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#845 = AXIS2_PLACEMENT_3D ( 'NONE', #2557, #1096, #2368 ) ; +#846 = CARTESIAN_POINT ( 'NONE', ( -8.750000000000000000, -6.500000000000000900, 2.550000000000000300 ) ) ; +#847 = EDGE_LOOP ( 'NONE', ( #2408, #1150, #1322, #2025, #2193 ) ) ; +#848 = DIRECTION ( 'NONE', ( 4.252998983898132000E-014, 0.4930339887499068900, -0.8700100493312458200 ) ) ; +#849 = VECTOR ( 'NONE', #789, 1000.000000000000000 ) ; +#850 = ORIENTED_EDGE ( 'NONE', *, *, #2268, .F. ) ; +#851 = CARTESIAN_POINT ( 'NONE', ( -6.328616167183168000, -1.415509680749531300, 7.499999999999998200 ) ) ; +#852 = LINE ( 'NONE', #1728, #802 ) ; +#853 = ORIENTED_EDGE ( 'NONE', *, *, #1392, .F. ) ; +#854 = FACE_OUTER_BOUND ( 'NONE', #855, .T. ) ; +#855 = EDGE_LOOP ( 'NONE', ( #1038, #800, #586, #326 ) ) ; +#856 = CARTESIAN_POINT ( 'NONE', ( -8.405378661242863800, -1.484463526201605500, 1.272400534022888100 ) ) ; +#857 = VECTOR ( 'NONE', #1997, 1000.000000000000000 ) ; +#858 = EDGE_CURVE ( 'NONE', #1389, #2589, #505, .T. ) ; +#859 = CARTESIAN_POINT ( 'NONE', ( -10.16328963370335400, -1.500000000000002900, 6.724598493821238400 ) ) ; +#860 = EDGE_LOOP ( 'NONE', ( #1690, #1881, #2527 ) ) ; +#861 = CARTESIAN_POINT ( 'NONE', ( -11.25000000000000000, -6.500000000000000900, 2.500000000000000400 ) ) ; +#862 = CARTESIAN_POINT ( 'NONE', ( -8.750000000000000000, -6.501000000000001200, 3.750000000000000000 ) ) ; +#863 = ORIENTED_EDGE ( 'NONE', *, *, #1359, .T. ) ; +#864 = DIRECTION ( 'NONE', ( -2.602085213965211100E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#865 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#866 = CARTESIAN_POINT ( 'NONE', ( -6.695218836399294400, -0.2292857428200835200, 6.063731485173052600 ) ) ; +#867 = CARTESIAN_POINT ( 'NONE', ( -7.102796399177600900, -0.7699711246519410600, 1.862252787608616300 ) ) ; +#868 = CARTESIAN_POINT ( 'NONE', ( 6.249999999999980500, -0.9387505004004290700, 3.750000000000160800 ) ) ; +#869 = CARTESIAN_POINT ( 'NONE', ( -6.622954869362071200, -0.1466816237726469300, 5.811754838795950600 ) ) ; +#870 = CARTESIAN_POINT ( 'NONE', ( -10.10412793376718100, -1.500000000000002400, 6.806239047945679100 ) ) ; +#871 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#872 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#873 = EDGE_CURVE ( 'NONE', #2606, #277, #52, .T. ) ; +#874 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.734723475976807100E-016, 0.0000000000000000000 ) ) ; +#875 = CARTESIAN_POINT ( 'NONE', ( -7.760517011741790800, -0.9721072046138445900, 0.5202832132553852900 ) ) ; +#876 = AXIS2_PLACEMENT_3D ( 'NONE', #203, #199, #452 ) ; +#877 = CARTESIAN_POINT ( 'NONE', ( -10.80572585913405700, -0.03930084807592652100, 1.743108591943918000 ) ) ; +#878 = DIRECTION ( 'NONE', ( -2.602085213965211100E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#879 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.500000000000002400, 4.999999999999999100 ) ) ; +#880 = AXIS2_PLACEMENT_3D ( 'NONE', #1948, #1522, #69 ) ; +#881 = CARTESIAN_POINT ( 'NONE', ( -9.964272585331942300, -1.500000000000002700, 6.940339233585377500 ) ) ; +#882 = ORIENTED_EDGE ( 'NONE', *, *, #177, .F. ) ; +#883 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 1.741936567896977200, 10.00000000000000000 ) ) ; +#884 = CARTESIAN_POINT ( 'NONE', ( 7.012055074363522600, -0.4956840045902414200, 6.501700712286185200 ) ) ; +#885 = VERTEX_POINT ( 'NONE', #35 ) ; +#886 = CARTESIAN_POINT ( 'NONE', ( -6.558364358243375500, -0.1189776701491933600, 5.564774139004146700 ) ) ; +#887 = CIRCLE ( 'NONE', #1440, 2.500000000000000400 ) ; +#888 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1179, #1191, #1157, #1146, #1137, #1131, #1126, #1117, #1113, #1108, #1103, #1094, #1089, #1079, #1056, #1045, #1035, #1029 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0006963764730304105900, 0.001197750592113638500, 0.001699124711196866800, 0.002200498830280094600, 0.002701872949363322900, 0.003203247068446551200, 0.003704621187529779900, 0.004205995306613008100, 0.004707369425696236400 ), + .UNSPECIFIED. ) ; +#889 = EDGE_LOOP ( 'NONE', ( #903, #2211 ) ) ; +#890 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#891 = LINE ( 'NONE', #2302, #927 ) ; +#892 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#893 = CARTESIAN_POINT ( 'NONE', ( 6.250000030917240300, -0.7006773030530910600, 3.602287001112786300 ) ) ; +#894 = VERTEX_POINT ( 'NONE', #1910 ) ; +#895 = CARTESIAN_POINT ( 'NONE', ( -9.881602733520638900, -1.500000000000002400, 6.994691668542768200 ) ) ; +#896 = FACE_OUTER_BOUND ( 'NONE', #315, .T. ) ; +#897 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.1100301479937477500, 6.479101966249696300 ) ) ; +#898 = ORIENTED_EDGE ( 'NONE', *, *, #2486, .T. ) ; +#899 = EDGE_CURVE ( 'NONE', #969, #2642, #275, .T. ) ; +#900 = ADVANCED_FACE ( 'NONE', ( #419 ), #2320, .F. ) ; +#901 = EDGE_LOOP ( 'NONE', ( #448, #1314, #1484, #2187, #2343 ) ) ; +#902 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.3224802157394023300, 5.965830033276815500 ) ) ; +#903 = ORIENTED_EDGE ( 'NONE', *, *, #781, .T. ) ; +#904 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -2.500000000000001300, 2.500000000000000400 ) ) ; +#905 = EDGE_LOOP ( 'NONE', ( #775, #1770, #1622, #634 ) ) ; +#906 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -1.499999999999997600, 3.750000000000000000 ) ) ; +#907 = DIRECTION ( 'NONE', ( -2.891205793294678300E-016, -1.000000000000000000, -1.734723475976807100E-015 ) ) ; +#908 = CARTESIAN_POINT ( 'NONE', ( 6.249999999999999100, 0.02688862559445955700, 2.287474868561207400 ) ) ; +#909 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#910 = CARTESIAN_POINT ( 'NONE', ( -6.639404172397179100, -0.1639620307254594800, 5.869807251784802600 ) ) ; +#911 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#912 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.156751133619649400, 10.64704761275629400 ) ) ; +#913 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 1.741936567896977200, 0.0000000000000000000 ) ) ; +#914 = CARTESIAN_POINT ( 'NONE', ( -6.805893733923182900, -0.6011258289602970900, 5.329385516736201600 ) ) ; +#915 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#916 = DIRECTION ( 'NONE', ( -1.734723475976807600E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#917 = CARTESIAN_POINT ( 'NONE', ( -6.232616707451200900, -0.2937195162543133600, 3.698204989727091000 ) ) ; +#918 = EDGE_CURVE ( 'NONE', #1952, #1570, #2490, .T. ) ; +#919 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.2459239244882339100, 6.239303131864844900 ) ) ; +#920 = CARTESIAN_POINT ( 'NONE', ( -10.09488151129760100, -1.665166312162813100, 0.5604211443005641100 ) ) ; +#921 = ORIENTED_EDGE ( 'NONE', *, *, #2238, .T. ) ; +#922 = CIRCLE ( 'NONE', #2022, 2.500000000000000000 ) ; +#923 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.734723475976807100E-016, 0.0000000000000000000 ) ) ; +#924 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.602085213965210100E-016, 0.0000000000000000000 ) ) ; +#925 = CARTESIAN_POINT ( 'NONE', ( -6.042278350797531100, 0.002070511665772561800, 2.442649225918205300 ) ) ; +#926 = ORIENTED_EDGE ( 'NONE', *, *, #2524, .T. ) ; +#927 = VECTOR ( 'NONE', #1453, 1000.000000000000000 ) ; +#928 = ORIENTED_EDGE ( 'NONE', *, *, #826, .F. ) ; +#929 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #788, #2102, #592, #1845, #381, #1633, #170, #1406, #2637, #1193, #2453, #984, #2251, #780 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( -1.252692163001783400E-005, 0.0008168612067853620500, 0.001646249335200742000, 0.002060943399408432100, 0.002475637463616122200, 0.002890331527823811900, 0.003305025592031502000 ), + .UNSPECIFIED. ) ; +#930 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -5.000000000000000900, 7.500000000000000000 ) ) ; +#931 = LINE ( 'NONE', #1935, #857 ) ; +#932 = ORIENTED_EDGE ( 'NONE', *, *, #1495, .F. ) ; +#933 = FACE_OUTER_BOUND ( 'NONE', #817, .T. ) ; +#934 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#935 = EDGE_LOOP ( 'NONE', ( #465, #705, #1491, #1681, #2350 ) ) ; +#936 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#937 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -2.500000000000003100, 0.0000000000000000000 ) ) ; +#938 = EDGE_CURVE ( 'NONE', #741, #2112, #209, .T. ) ; +#939 = ORIENTED_EDGE ( 'NONE', *, *, #1777, .F. ) ; +#940 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#941 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 1.741936567896977200, 2.500000000000000000 ) ) ; +#942 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#943 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#944 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 4.999778718930982400, 6.250000000000000000 ) ) ; +#945 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#946 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.289692704310191100, 0.3124999999999967800 ) ) ; +#947 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.500000000000000400, 7.500000000000000000 ) ) ; +#948 = CARTESIAN_POINT ( 'NONE', ( -11.04128784747791800, -1.500000000000002700, 4.999999999999999100 ) ) ; +#949 = CARTESIAN_POINT ( 'NONE', ( -6.750000000000001800, -2.500000000000003100, 0.0000000000000000000 ) ) ; +#950 = EDGE_CURVE ( 'NONE', #611, #773, #760, .T. ) ; +#951 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#952 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.009794386968449284700, 5.565433582956965000 ) ) ; +#953 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #363, #443, #454, #219, #253, #334, #173, #190, #178, #221, #137, #186, #86, #120, #103, #95, #29, #90, #111, #22 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0005835726724159226100, 0.0008753590086238838700, 0.001167145344831845200, 0.001313038512935825600, 0.001458931681039806500, 0.001604824849143787300, 0.001750718017247767700, 0.002042504353455727900, 0.002334290689663688300 ), + .UNSPECIFIED. ) ; +#954 = ORIENTED_EDGE ( 'NONE', *, *, #2366, .T. ) ; +#955 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -6.500000000000000900, 3.750000000000000000 ) ) ; +#956 = ORIENTED_EDGE ( 'NONE', *, *, #1194, .T. ) ; +#957 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -1.499999999999997600, 3.750000000000000000 ) ) ; +#958 = VECTOR ( 'NONE', #1504, 1000.000000000000000 ) ; +#959 = CARTESIAN_POINT ( 'NONE', ( -10.12484963802876200, -1.500000000000002900, 1.191512292099060800 ) ) ; +#960 = EDGE_LOOP ( 'NONE', ( #1998, #2179, #421 ) ) ; +#961 = EDGE_CURVE ( 'NONE', #1983, #2112, #887, .T. ) ; +#962 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -6.500000000000001800, 7.500000000000000000 ) ) ; +#963 = VECTOR ( 'NONE', #1298, 1000.000000000000000 ) ; +#964 = ORIENTED_EDGE ( 'NONE', *, *, #531, .T. ) ; +#965 = LINE ( 'NONE', #1078, #963 ) ; +#966 = CARTESIAN_POINT ( 'NONE', ( -6.750000000000003600, -0.3249748766718770200, 6.232584971874746100 ) ) ; +#967 = VERTEX_POINT ( 'NONE', #2163 ) ; +#968 = ORIENTED_EDGE ( 'NONE', *, *, #1560, .T. ) ; +#969 = VERTEX_POINT ( 'NONE', #2554 ) ; +#970 = CARTESIAN_POINT ( 'NONE', ( -8.945129561165494200, -1.500000000000002700, 1.248990654325014700 ) ) ; +#971 = ORIENTED_EDGE ( 'NONE', *, *, #1338, .F. ) ; +#972 = EDGE_CURVE ( 'NONE', #1589, #516, #1445, .T. ) ; +#973 = ADVANCED_FACE ( 'NONE', ( #2017 ), #691, .T. ) ; +#974 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.602085213965211100E-016, -0.0000000000000000000 ) ) ; +#975 = AXIS2_PLACEMENT_3D ( 'NONE', #372, #2484, #2495 ) ; +#976 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2488, #2510, #2457, #2437, #2429, #2416, #2411, #2399, #2390, #2381, #2370, #2363, #2354, #2301 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( -1.252692163094118400E-005, 0.0008168612067844738700, 0.001646249335199888900, 0.002060943399407595500, 0.002475637463615302100, 0.002890331527823009100, 0.003305025592030715700 ), + .UNSPECIFIED. ) ; +#977 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999999100, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#978 = PLANE ( 'NONE', #142 ) ; +#979 = ADVANCED_FACE ( 'NONE', ( #2337 ), #2635, .T. ) ; +#980 = CIRCLE ( 'NONE', #1398, 2.500000000000000400 ) ; +#981 = CARTESIAN_POINT ( 'NONE', ( 8.418967747197969600, -0.07061636851149449800, 6.283035874707149300 ) ) ; +#982 = EDGE_CURVE ( 'NONE', #1663, #2334, #980, .T. ) ; +#983 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#984 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000900, 0.2311042888668386500, 6.231387037785141000 ) ) ; +#985 = EDGE_LOOP ( 'NONE', ( #693, #926, #1659, #1853, #2512 ) ) ; +#986 = VECTOR ( 'NONE', #1034, 1000.000000000000000 ) ; +#987 = ORIENTED_EDGE ( 'NONE', *, *, #409, .T. ) ; +#988 = PLANE ( 'NONE', #1915 ) ; +#989 = AXIS2_PLACEMENT_3D ( 'NONE', #68, #20, #9 ) ; +#990 = VECTOR ( 'NONE', #2545, 1000.000000000000000 ) ; +#991 = ORIENTED_EDGE ( 'NONE', *, *, #1204, .F. ) ; +#992 = CARTESIAN_POINT ( 'NONE', ( 6.749999999999980500, -0.3249748766718592000, 6.232584971874715100 ) ) ; +#993 = CARTESIAN_POINT ( 'NONE', ( 8.405378661242883400, -1.484463526201583300, 6.227599465977112600 ) ) ; +#994 = CARTESIAN_POINT ( 'NONE', ( 8.476934860899485000, -1.499999999999997600, 6.235042339640919800 ) ) ; +#995 = LINE ( 'NONE', #1731, #990 ) ; +#996 = EDGE_LOOP ( 'NONE', ( #2517, #932, #1143 ) ) ; +#997 = CARTESIAN_POINT ( 'NONE', ( 6.685538098314661500, -0.2123758909476116100, 6.033892282608013200 ) ) ; +#998 = EDGE_LOOP ( 'NONE', ( #1861, #2019, #2465 ) ) ; +#999 = CARTESIAN_POINT ( 'NONE', ( 6.622956709669270300, -0.1466835684370406100, 5.811761335387383400 ) ) ; +#1000 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.734723475976807100E-015 ) ) ; +#1001 = CARTESIAN_POINT ( 'NONE', ( 6.347104568189594800, -0.5313418540293669600, 4.459312902967385900 ) ) ; +#1002 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #301 ) ) ; +#1003 = CARTESIAN_POINT ( 'NONE', ( 6.504831440094617900, -0.1010117019202170400, 5.357698026708759700 ) ) ; +#1004 = CARTESIAN_POINT ( 'NONE', ( -9.587348138839045600, -1.755572229636599900, 1.392379800758230600 ) ) ; +#1005 = CARTESIAN_POINT ( 'NONE', ( 6.449121881278375500, -0.1215165150849233500, 5.125467751950549400 ) ) ; +#1006 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.2552283329904531700, 2.486889971775073400 ) ) ; +#1007 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.807003620809173200E-016, 0.0000000000000000000 ) ) ; +#1008 = CARTESIAN_POINT ( 'NONE', ( 6.352871977257460200, -0.2395619474599332600, 4.678520853466642900 ) ) ; +#1009 = ORIENTED_EDGE ( 'NONE', *, *, #2654, .T. ) ; +#1010 = CARTESIAN_POINT ( 'NONE', ( -10.58308603893081200, 0.03001104472329611800, 1.629429564495146600 ) ) ; +#1011 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000001800, 0.1784829299517562400, 1.141690128346366100 ) ) ; +#1012 = VERTEX_POINT ( 'NONE', #85 ) ; +#1013 = EDGE_CURVE ( 'NONE', #1887, #1729, #1232, .T. ) ; +#1014 = EDGE_CURVE ( 'NONE', #1188, #636, #424, .T. ) ; +#1015 = ORIENTED_EDGE ( 'NONE', *, *, #2346, .T. ) ; +#1016 = CIRCLE ( 'NONE', #54, 0.5000000000000000000 ) ; +#1017 = CARTESIAN_POINT ( 'NONE', ( -9.659685017421368900, -1.811559494638728300, 6.080390079503713400 ) ) ; +#1018 = ORIENTED_EDGE ( 'NONE', *, *, #2069, .F. ) ; +#1019 = EDGE_CURVE ( 'NONE', #1684, #1762, #179, .T. ) ; +#1020 = VECTOR ( 'NONE', #356, 1000.000000000000000 ) ; +#1021 = CARTESIAN_POINT ( 'NONE', ( -9.988393474176499300, -1.596258624408965400, 0.5209408204003710400 ) ) ; +#1022 = EDGE_LOOP ( 'NONE', ( #1592, #1788, #850, #1963 ) ) ; +#1023 = CARTESIAN_POINT ( 'NONE', ( 6.312802380916124000, -0.3368464426229609300, 4.463849099603230300 ) ) ; +#1024 = VERTEX_POINT ( 'NONE', #1170 ) ; +#1025 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025179100, 0.9659258262890690900 ) ) ; +#1026 = ORIENTED_EDGE ( 'NONE', *, *, #1908, .F. ) ; +#1027 = EDGE_LOOP ( 'NONE', ( #2307, #2487, #1636 ) ) ; +#1028 = CARTESIAN_POINT ( 'NONE', ( 6.261103544186595600, -0.5932763564046376100, 4.074349865143374500 ) ) ; +#1029 = CARTESIAN_POINT ( 'NONE', ( -8.476934860899485000, -1.500000000000002400, 1.264957660359078000 ) ) ; +#1030 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1031 = CARTESIAN_POINT ( 'NONE', ( 6.270481662090605600, -0.1570584232506450900, 4.115964466998822700 ) ) ; +#1032 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -1.499999999999997800, 3.750000000000000000 ) ) ; +#1033 = CC_DESIGN_SECURITY_CLASSIFICATION ( #1283, ( #1503 ) ) ; +#1034 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1035 = CARTESIAN_POINT ( 'NONE', ( -8.316097335528546400, -1.463266549695138300, 1.282631049877407800 ) ) ; +#1036 = CARTESIAN_POINT ( 'NONE', ( 6.456875258551975500, -0.4982909508098692900, 4.749540563014962300 ) ) ; +#1037 = CARTESIAN_POINT ( 'NONE', ( -11.25000000000000000, -6.500000000000000900, 2.500000000000000000 ) ) ; +#1038 = ORIENTED_EDGE ( 'NONE', *, *, #950, .F. ) ; +#1039 = CARTESIAN_POINT ( 'NONE', ( -9.435658540727025900, -1.662628835573791900, 1.343902008933575600 ) ) ; +#1040 = EDGE_LOOP ( 'NONE', ( #2029, #1110, #1834, #1455 ) ) ; +#1041 = CARTESIAN_POINT ( 'NONE', ( 6.249999999999980500, -0.9387505004004290700, 3.750000000000160800 ) ) ; +#1042 = CARTESIAN_POINT ( 'NONE', ( 6.494491005466699100, -0.1683327565411246500, 5.922256928514915600 ) ) ; +#1043 = ORIENTED_EDGE ( 'NONE', *, *, #159, .T. ) ; +#1044 = EDGE_CURVE ( 'NONE', #2634, #2285, #588, .T. ) ; +#1045 = CARTESIAN_POINT ( 'NONE', ( -8.163306913940239400, -1.398488449096313200, 1.315250836458316000 ) ) ; +#1046 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1041, #1052, #1028, #1023, #1008, #1005, #1003, #999, #997, #992 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( -1.337772436753979800E-005, 0.0006961422859747234700, 0.001405662296316986600, 0.002115182306659249800, 0.002824702317001513300 ), + .UNSPECIFIED. ) ; +#1047 = EDGE_CURVE ( 'NONE', #1413, #1292, #819, .T. ) ; +#1048 = CIRCLE ( 'NONE', #60, 0.5000000000000004400 ) ; +#1049 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.531754163448148400, 6.750000000000000000 ) ) ; +#1050 = VERTEX_POINT ( 'NONE', #553 ) ; +#1051 = CIRCLE ( 'NONE', #91, 2.291287847477919000 ) ; +#1052 = CARTESIAN_POINT ( 'NONE', ( 6.249999999999999100, -0.7545963527576110600, 3.898400442252825100 ) ) ; +#1053 = EDGE_LOOP ( 'NONE', ( #2441, #2444, #2459, #2470, #2475 ) ) ; +#1054 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1055 = EDGE_LOOP ( 'NONE', ( #398, #882, #1827, #662 ) ) ; +#1056 = CARTESIAN_POINT ( 'NONE', ( -7.878194630853159600, -1.254493838562249900, 1.402199398389209400 ) ) ; +#1057 = CARTESIAN_POINT ( 'NONE', ( -6.139683787903890400, -0.01417940191213577600, 2.209583211991291500 ) ) ; +#1058 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.9885340000112370400, 7.499999999999999100 ) ) ; +#1059 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.499999999999997600, 2.500000000000000400 ) ) ; +#1060 = CARTESIAN_POINT ( 'NONE', ( -5.921834734243231100, -0.01569965501632128800, 2.804845488995487500 ) ) ; +#1061 = EDGE_CURVE ( 'NONE', #2642, #1986, #1471, .T. ) ; +#1062 = CARTESIAN_POINT ( 'NONE', ( -6.750000000000000900, -2.500000000000003100, 7.500000000000000000 ) ) ; +#1063 = CARTESIAN_POINT ( 'NONE', ( -6.393195612715998300, -0.5125597263190234700, 2.911563659523142400 ) ) ; +#1064 = CARTESIAN_POINT ( 'NONE', ( -8.816895208396518400, 0.3651201720965230900, 1.240947587835351800 ) ) ; +#1065 = CARTESIAN_POINT ( 'NONE', ( -10.17762824323423800, 0.1290877593507002200, 1.449944556486221700 ) ) ; +#1066 = CARTESIAN_POINT ( 'NONE', ( 6.252579707117890400, -0.7595894551974584600, 3.594690504848276900 ) ) ; +#1067 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.499999999999997600, 6.251009345674983600 ) ) ; +#1068 = CARTESIAN_POINT ( 'NONE', ( -6.631265858614529700, -2.234499733608173300, 0.0000000000000000000 ) ) ; +#1069 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1070 = CARTESIAN_POINT ( 'NONE', ( 8.476934860897747700, -1.499999999999997600, 1.264957660359270500 ) ) ; +#1071 = CARTESIAN_POINT ( 'NONE', ( -8.932939833528509500, -1.289692704309954200, 0.3125000000000069400 ) ) ; +#1072 = CARTESIAN_POINT ( 'NONE', ( 8.568178868411106200, -1.499999999999997600, 1.254931449857032300 ) ) ; +#1073 = CARTESIAN_POINT ( 'NONE', ( -7.485152036820600200, -0.1071147135073943400, 1.562599110107773400 ) ) ; +#1074 = ORIENTED_EDGE ( 'NONE', *, *, #810, .T. ) ; +#1075 = CARTESIAN_POINT ( 'NONE', ( -9.764625079757506000, -1.481675398110338300, 0.4504651601133951000 ) ) ; +#1076 = EDGE_LOOP ( 'NONE', ( #2123, #830, #1627 ) ) ; +#1077 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.500000000000000900, 0.0000000000000000000 ) ) ; +#1078 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.249999999999999600, 7.500000000000000000 ) ) ; +#1079 = CARTESIAN_POINT ( 'NONE', ( -7.744343482391283100, -1.174709019033792300, 1.456602124830877600 ) ) ; +#1080 = CARTESIAN_POINT ( 'NONE', ( -10.19066261346733200, -1.747974708760581500, 6.899723452372406000 ) ) ; +#1081 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 4.999778718930982400, 6.250000000000000000 ) ) ; +#1082 = ORIENTED_EDGE ( 'NONE', *, *, #1738, .F. ) ; +#1083 = EDGE_CURVE ( 'NONE', #967, #1128, #2508, .T. ) ; +#1084 = VECTOR ( 'NONE', #2027, 1000.000000000000000 ) ; +#1085 = ORIENTED_EDGE ( 'NONE', *, *, #1537, .T. ) ; +#1086 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1087 = CARTESIAN_POINT ( 'NONE', ( -7.925430843468233500, -1.277685765625556700, 1.388522145485116700 ) ) ; +#1088 = LINE ( 'NONE', #2615, #1020 ) ; +#1089 = CARTESIAN_POINT ( 'NONE', ( -7.485981223124635900, -1.014757851267604800, 1.588224022488535600 ) ) ; +#1090 = ORIENTED_EDGE ( 'NONE', *, *, #2480, .T. ) ; +#1091 = CC_DESIGN_APPROVAL ( #1141, ( #1283 ) ) ; +#1092 = EDGE_LOOP ( 'NONE', ( #2287, #2079, #640, #1442 ) ) ; +#1093 = ORIENTED_EDGE ( 'NONE', *, *, #2268, .T. ) ; +#1094 = CARTESIAN_POINT ( 'NONE', ( -7.361399618891692100, -0.9340995379406062900, 1.665916713662418900 ) ) ; +#1095 = CARTESIAN_POINT ( 'NONE', ( 7.457753385686013200, -0.7907181908417484400, 6.828878471190641600 ) ) ; +#1096 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1097 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, -0.3249748766718753600, 1.267415028125256500 ) ) ; +#1098 = CARTESIAN_POINT ( 'NONE', ( 8.659229808471989600, -1.499999999999997600, 1.248990654325015800 ) ) ; +#1099 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1100 = ADVANCED_FACE ( 'NONE', ( #446 ), #1548, .F. ) ; +#1101 = EDGE_CURVE ( 'NONE', #2414, #1562, #81, .T. ) ; +#1102 = AXIS2_PLACEMENT_3D ( 'NONE', #2335, #2317, #2306 ) ; +#1103 = CARTESIAN_POINT ( 'NONE', ( -7.126698107400657500, -0.7857612843798151800, 1.843037722373832800 ) ) ; +#1104 = CARTESIAN_POINT ( 'NONE', ( -10.80572585913382100, -0.03930084807741225600, 5.756891408057191100 ) ) ; +#1105 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -2.500000000000003100, 2.500000000000000000 ) ) ; +#1106 = CARTESIAN_POINT ( 'NONE', ( 6.453374369304758500, -0.1299222254216084200, 2.362470329156506100 ) ) ; +#1107 = AXIS2_PLACEMENT_3D ( 'NONE', #655, #596, #590 ) ; +#1108 = CARTESIAN_POINT ( 'NONE', ( -7.015611442479174000, -0.7172375045536019100, 1.942809218265262100 ) ) ; +#1109 = CARTESIAN_POINT ( 'NONE', ( -3.749999999999999600, -2.500000000000000400, 7.500000000000000000 ) ) ; +#1110 = ORIENTED_EDGE ( 'NONE', *, *, #2208, .F. ) ; +#1111 = TOROIDAL_SURFACE ( 'NONE', #2018, 3.000000000000000000, 0.5000000000000000000 ) ; +#1112 = ORIENTED_EDGE ( 'NONE', *, *, #1645, .T. ) ; +#1113 = CARTESIAN_POINT ( 'NONE', ( -6.805591046177011300, -0.6009693411969468900, 2.170976247696323500 ) ) ; +#1114 = CYLINDRICAL_SURFACE ( 'NONE', #113, 10.00000000000000000 ) ; +#1115 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000000400, -5.000000000000000900, 0.0000000000000000000 ) ) ; +#1116 = ORIENTED_EDGE ( 'NONE', *, *, #1044, .F. ) ; +#1117 = CARTESIAN_POINT ( 'NONE', ( -6.707037289822905800, -0.5536549987993756300, 2.299855812745497100 ) ) ; +#1118 = CIRCLE ( 'NONE', #132, 2.500000000000000400 ) ; +#1119 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.9387505004003672300, 3.750000000000042200 ) ) ; +#1120 = CARTESIAN_POINT ( 'NONE', ( -5.811325955962361800, -0.1273718567739055800, 3.298337207790788600 ) ) ; +#1121 = EDGE_CURVE ( 'NONE', #1802, #611, #1549, .T. ) ; +#1122 = TOROIDAL_SURFACE ( 'NONE', #145, 3.000000000000000000, 0.5000000000000000000 ) ; +#1123 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #561, #2024, #2213, #742 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0005517879182954004200, 0.0008237949265464308100 ), + .UNSPECIFIED. ) ; +#1124 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.9387505004003686700, 3.750000000000040000 ) ) ; +#1125 = ORIENTED_EDGE ( 'NONE', *, *, #1259, .F. ) ; +#1126 = CARTESIAN_POINT ( 'NONE', ( -6.535903699187874900, -0.4990157681384397900, 2.577655183091500700 ) ) ; +#1127 = AXIS2_PLACEMENT_3D ( 'NONE', #495, #486, #476 ) ; +#1128 = VERTEX_POINT ( 'NONE', #2648 ) ; +#1129 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.9387505004003698900, 3.750000000000037700 ) ) ; +#1130 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -6.501000000000001200, 3.750000000000000000 ) ) ; +#1131 = CARTESIAN_POINT ( 'NONE', ( -6.460693887389861200, -0.4915523136237347500, 2.732105716050428500 ) ) ; +#1132 = CARTESIAN_POINT ( 'NONE', ( -10.58308603893106300, 0.03001104472308332000, 5.870570435504909300 ) ) ; +#1133 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, -0.7143553552641872500, 3.569833929201735600 ) ) ; +#1134 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000002700, -0.7143553551953726300, 3.930166070712917100 ) ) ; +#1135 = CARTESIAN_POINT ( 'NONE', ( 6.249999984307200900, -0.7006773030235554600, 3.897712998840007400 ) ) ; +#1136 = EDGE_CURVE ( 'NONE', #1562, #2274, #1517, .T. ) ; +#1137 = CARTESIAN_POINT ( 'NONE', ( -6.347104568189544200, -0.5313418540294060400, 3.040687097032775300 ) ) ; +#1138 = CARTESIAN_POINT ( 'NONE', ( -11.03959828868358900, -0.1521428184593995600, 5.624203150946662800 ) ) ; +#1139 = PLANE ( 'NONE', #339 ) ; +#1140 = CARTESIAN_POINT ( 'NONE', ( -10.09488151129754700, -1.665166312162836400, 6.939578855699485500 ) ) ; +#1141 = APPROVAL ( #2150, 'UNSPECIFIED' ) ; +#1142 = ADVANCED_FACE ( 'NONE', ( #1208 ), #661, .F. ) ; +#1143 = ORIENTED_EDGE ( 'NONE', *, *, #2602, .T. ) ; +#1144 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -6.500000000000000900, 2.500000000000000000 ) ) ; +#1145 = EDGE_CURVE ( 'NONE', #1128, #2160, #976, .T. ) ; +#1146 = CARTESIAN_POINT ( 'NONE', ( -6.306842884914872500, -0.5793599075536151100, 3.199501551066588500 ) ) ; +#1147 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.6863786727437802800, 3.865809341113834100 ) ) ; +#1148 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1149 = ORIENTED_EDGE ( 'NONE', *, *, #1101, .T. ) ; +#1150 = ORIENTED_EDGE ( 'NONE', *, *, #565, .T. ) ; +#1151 = CARTESIAN_POINT ( 'NONE', ( 6.267176751789189200, -0.5363319534914557900, 4.142669375281549500 ) ) ; +#1152 = FACE_OUTER_BOUND ( 'NONE', #619, .T. ) ; +#1153 = ORIENTED_EDGE ( 'NONE', *, *, #374, .T. ) ; +#1154 = CARTESIAN_POINT ( 'NONE', ( -8.927730531804522600, -1.507377672391761300, 6.250594578705779700 ) ) ; +#1155 = FACE_OUTER_BOUND ( 'NONE', #1241, .T. ) ; +#1156 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -6.500000000000000900, 2.549999999999999400 ) ) ; +#1157 = CARTESIAN_POINT ( 'NONE', ( -6.258844702201827200, -0.7250769341613714200, 3.492685963225353500 ) ) ; +#1158 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.4911800329091393100, 4.082654036551696600 ) ) ; +#1159 = EDGE_CURVE ( 'NONE', #1931, #2011, #1275, .T. ) ; +#1160 = ORIENTED_EDGE ( 'NONE', *, *, #674, .T. ) ; +#1161 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.4526175258724231000, 4.014439539287128200 ) ) ; +#1162 = ORIENTED_EDGE ( 'NONE', *, *, #1908, .T. ) ; +#1163 = CARTESIAN_POINT ( 'NONE', ( 6.333307644926421200, -0.2768100308281750100, 4.583238400706148900 ) ) ; +#1164 = CARTESIAN_POINT ( 'NONE', ( -10.00472517855574000, -1.500000000000002900, 1.277667866032784300 ) ) ; +#1165 = CARTESIAN_POINT ( 'NONE', ( -8.932939833526171800, -1.289692704310192500, 7.187500000000000900 ) ) ; +#1166 = CARTESIAN_POINT ( 'NONE', ( -9.587348138839047400, -1.755572229636658300, 6.107620199241768700 ) ) ; +#1167 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, -0.1725531113854771000, 4.501868566865885800 ) ) ; +#1168 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #313, #418, #297 ), + ( #285, #278, #269 ), + ( #247, #233, #216 ), + ( #210, #206, #201 ), + ( #183, #175, #169 ), + ( #160, #148, #133 ), + ( #123, #116, #112 ), + ( #104, #99, #93 ), + ( #80, #77, #71 ), + ( #61, #25, #8 ), + ( #6, #4, #2326 ), + ( #1434, #2530, #2518 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -1.279358563532895200E-017, 0.0008242104035962671100, 0.001236315605394407100, 0.001648420807192547000, 0.002472631210788826800, 0.003296841614385107000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865536800, 1.000000000000000000), + ( 1.000000000000000000, 0.7458313642435467900, 1.000000000000000000), + ( 1.000000000000000000, 0.7821085400636435000, 1.000000000000000000), + ( 1.000000000000000000, 0.8318113535495539300, 1.000000000000000000), + ( 1.000000000000000000, 0.8479078540276332500, 1.000000000000000000), + ( 1.000000000000000000, 0.8783064667575393200, 1.000000000000000000), + ( 1.000000000000000000, 0.8926433373566520200, 1.000000000000000000), + ( 1.000000000000000000, 0.9336126647199494100, 1.000000000000000000), + ( 1.000000000000000000, 0.9575908025920747400, 1.000000000000000000), + ( 1.000000000000000000, 0.9915195602578061900, 1.000000000000000000), + ( 1.000000000000000000, 1.000382643617546700, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1169 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000001800, 1.249999999999999600, 12.50000000000000000 ) ) ; +#1170 = CARTESIAN_POINT ( 'NONE', ( -9.795704756372449800, -1.500000000000002700, 0.4612499999999918900 ) ) ; +#1171 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1172 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.05672885952154072000, 4.397493853157399700 ) ) ; +#1173 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #57, #2164, ( #1283 ) ) ; +#1174 = ORIENTED_EDGE ( 'NONE', *, *, #1598, .T. ) ; +#1175 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.602085213965208200E-016, 0.0000000000000000000 ) ) ; +#1176 = FACE_OUTER_BOUND ( 'NONE', #627, .T. ) ; +#1177 = CARTESIAN_POINT ( 'NONE', ( -10.17762824323399900, 0.1290877593509331100, 6.050055443513718600 ) ) ; +#1178 = VERTEX_POINT ( 'NONE', #2481 ) ; +#1179 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999978700, -0.9387505004004305100, 3.750000000000160300 ) ) ; +#1180 = VECTOR ( 'NONE', #2041, 1000.000000000000000 ) ; +#1181 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1182 = ORIENTED_EDGE ( 'NONE', *, *, #1259, .T. ) ; +#1183 = ADVANCED_FACE ( 'NONE', ( #2404 ), #1555, .T. ) ; +#1184 = LINE ( 'NONE', #373, #1180 ) ; +#1185 = CARTESIAN_POINT ( 'NONE', ( 6.379113388733540700, -0.1950268931177055200, 4.807258860840494000 ) ) ; +#1186 = ORIENTED_EDGE ( 'NONE', *, *, #1404, .F. ) ; +#1187 = LINE ( 'NONE', #1818, #1084 ) ; +#1188 = VERTEX_POINT ( 'NONE', #1205 ) ; +#1189 = ORIENTED_EDGE ( 'NONE', *, *, #2346, .F. ) ; +#1190 = CARTESIAN_POINT ( 'NONE', ( 7.945040619986274400, -1.070665523966422000, 7.052008261565520200 ) ) ; +#1191 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999851700, -0.8236385523328184600, 3.630187685787699800 ) ) ; +#1192 = ORIENTED_EDGE ( 'NONE', *, *, #2159, .F. ) ; +#1193 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000001800, 0.3299603690163558900, 5.829049915161911100 ) ) ; +#1194 = EDGE_CURVE ( 'NONE', #317, #1389, #888, .T. ) ; +#1195 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.06440818146723997800, 4.739302041877881100 ) ) ; +#1196 = EDGE_CURVE ( 'NONE', #2497, #1917, #2638, .T. ) ; +#1197 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.1014633329782052800, 4.629021591470492000 ) ) ; +#1198 = CARTESIAN_POINT ( 'NONE', ( 8.816895208395973100, 0.3651201720968916800, 6.259052412164575000 ) ) ; +#1199 = CARTESIAN_POINT ( 'NONE', ( -9.795704756359207000, -1.500000000000002700, 7.038750000006800200 ) ) ; +#1200 = CARTESIAN_POINT ( 'NONE', ( 8.163306913940260800, -1.398488449096316100, 6.184749163541686900 ) ) ; +#1201 = CARTESIAN_POINT ( 'NONE', ( -9.355741625432473900, -1.625216913719071500, 6.177649275846731000 ) ) ; +#1202 = CARTESIAN_POINT ( 'NONE', ( 6.453374369304805600, -0.1299222254216539400, 5.137529670843485400 ) ) ; +#1203 = CARTESIAN_POINT ( 'NONE', ( 7.408477594459292000, -0.7593931866160629200, 6.800069265759502100 ) ) ; +#1204 = EDGE_CURVE ( 'NONE', #1986, #1362, #2243, .T. ) ; +#1205 = CARTESIAN_POINT ( 'NONE', ( 6.750000000000000900, -2.500000000000001800, 7.500000000000000000 ) ) ; +#1206 = CARTESIAN_POINT ( 'NONE', ( 6.258844702201847600, -0.7250769341612644000, 4.007314036774814300 ) ) ; +#1207 = ORIENTED_EDGE ( 'NONE', *, *, #938, .T. ) ; +#1208 = FACE_OUTER_BOUND ( 'NONE', #423, .T. ) ; +#1209 = VERTEX_POINT ( 'NONE', #962 ) ; +#1210 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.01466041860302273700, 5.093291458711470400 ) ) ; +#1211 = ORIENTED_EDGE ( 'NONE', *, *, #746, .T. ) ; +#1212 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.2552283350445987400, 5.013110027687006600 ) ) ; +#1213 = FACE_OUTER_BOUND ( 'NONE', #1053, .T. ) ; +#1214 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000900, 0.3371697330366912300, 2.083990217301641100 ) ) ; +#1215 = VERTEX_POINT ( 'NONE', #2280 ) ; +#1216 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1217 = FACE_OUTER_BOUND ( 'NONE', #1040, .T. ) ; +#1218 = ORIENTED_EDGE ( 'NONE', *, *, #612, .T. ) ; +#1219 = CARTESIAN_POINT ( 'NONE', ( 6.478808769809442800, -0.1181618869076192200, 5.245128327611810800 ) ) ; +#1220 = VERTEX_POINT ( 'NONE', #944 ) ; +#1221 = EDGE_CURVE ( 'NONE', #2285, #2083, #2322, .T. ) ; +#1222 = CARTESIAN_POINT ( 'NONE', ( -9.764625079757497200, -1.481675398110257500, 7.049534839886572300 ) ) ; +#1223 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999999100, 4.156751133619650300, 1.852952387243703900 ) ) ; +#1224 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #124, #2171, ( #1283 ) ) ; +#1225 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.02688862559444410800, 5.212525131438837900 ) ) ; +#1226 = CARTESIAN_POINT ( 'NONE', ( -9.355741625432562700, -1.625216913719045100, 1.322350724153289000 ) ) ; +#1227 = AXIS2_PLACEMENT_3D ( 'NONE', #2565, #2570, #2547 ) ; +#1228 = CARTESIAN_POINT ( 'NONE', ( -9.988393474176509900, -1.596258624409047500, 6.979059179599661700 ) ) ; +#1229 = CARTESIAN_POINT ( 'NONE', ( 6.269011297918176200, -1.132092084815517800, 7.499999999999999100 ) ) ; +#1230 = CARTESIAN_POINT ( 'NONE', ( -9.435658540727022400, -1.662628835573735100, 6.156097991066422600 ) ) ; +#1231 = SPHERICAL_SURFACE ( 'NONE', #196, 2.500000000000000000 ) ; +#1232 = LINE ( 'NONE', #1037, #2042 ) ; +#1233 = CARTESIAN_POINT ( 'NONE', ( -9.987345432356244500, 0.1613506199922996000, 1.378826187909426800 ) ) ; +#1234 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.2920992887519390200, 5.144906831900703600 ) ) ; +#1235 = CARTESIAN_POINT ( 'NONE', ( 5.833759012863279000, -0.08906916515864042600, 4.326681837145253300 ) ) ; +#1236 = ORIENTED_EDGE ( 'NONE', *, *, #2645, .F. ) ; +#1237 = EDGE_CURVE ( 'NONE', #1362, #807, #2611, .T. ) ; +#1238 = CARTESIAN_POINT ( 'NONE', ( 6.536292431164944200, -0.4990952994262249900, 2.576937646880726400 ) ) ; +#1239 = FACE_OUTER_BOUND ( 'NONE', #725, .T. ) ; +#1240 = AXIS2_PLACEMENT_3D ( 'NONE', #2236, #2230, #2206 ) ; +#1241 = EDGE_LOOP ( 'NONE', ( #2076, #1386, #547, #526 ) ) ; +#1242 = VECTOR ( 'NONE', #1255, 1000.000000000000000 ) ; +#1243 = CARTESIAN_POINT ( 'NONE', ( 6.531283289548656300, -0.1125400916347706200, 5.458757136152176100 ) ) ; +#1244 = ORIENTED_EDGE ( 'NONE', *, *, #442, .T. ) ; +#1245 = EDGE_CURVE ( 'NONE', #2253, #2222, #2639, .T. ) ; +#1246 = CIRCLE ( 'NONE', #238, 2.499999999999999600 ) ; +#1247 = CARTESIAN_POINT ( 'NONE', ( -9.646549796740705700, -1.435463380087025600, 0.4190516479973193100 ) ) ; +#1248 = ORIENTED_EDGE ( 'NONE', *, *, #300, .T. ) ; +#1249 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000001800, 0.02515241365660219100, 5.448505267104719600 ) ) ; +#1250 = CARTESIAN_POINT ( 'NONE', ( 6.497972648086046000, 0.006132037403168189700, 4.840719439615734900 ) ) ; +#1251 = CYLINDRICAL_SURFACE ( 'NONE', #224, 2.500000000000000400 ) ; +#1252 = ORIENTED_EDGE ( 'NONE', *, *, #1145, .T. ) ; +#1253 = CARTESIAN_POINT ( 'NONE', ( -6.250075410712297800, -0.9576952670918209600, 3.730582279363523500 ) ) ; +#1254 = VERTEX_POINT ( 'NONE', #670 ) ; +#1255 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1256 = ORIENTED_EDGE ( 'NONE', *, *, #141, .T. ) ; +#1257 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.3371697310610923800, 5.416009783215787200 ) ) ; +#1258 = CARTESIAN_POINT ( 'NONE', ( -9.104569261388197900, -1.535471621816493900, 1.268754872800055900 ) ) ; +#1259 = EDGE_CURVE ( 'NONE', #2414, #741, #2636, .T. ) ; +#1260 = CARTESIAN_POINT ( 'NONE', ( 6.558364358243363900, -0.1189776701491881300, 5.564774139004133400 ) ) ; +#1261 = CARTESIAN_POINT ( 'NONE', ( 6.870409169538378400, -0.6346662111082424000, 5.406504618314795800 ) ) ; +#1262 = CARTESIAN_POINT ( 'NONE', ( 6.749999999999992900, 0.1100301479937730000, 6.479101966249662500 ) ) ; +#1263 = CARTESIAN_POINT ( 'NONE', ( 6.274025236268731700, -0.5291882553417731600, 3.328301796227035600 ) ) ; +#1264 = CARTESIAN_POINT ( 'NONE', ( -11.25000000000000000, -6.500000000000000900, 4.999999999999999100 ) ) ; +#1265 = AXIS2_PLACEMENT_3D ( 'NONE', #941, #923, #915 ) ; +#1266 = CARTESIAN_POINT ( 'NONE', ( -9.646549796740609800, -1.435463380087050700, 7.080948352002728500 ) ) ; +#1267 = CARTESIAN_POINT ( 'NONE', ( -9.987345432356061500, 0.1613506199921498900, 6.121173812090600700 ) ) ; +#1268 = CARTESIAN_POINT ( 'NONE', ( -8.786756602809562700, 0.4047374712911852000, 1.249999991491141000 ) ) ; +#1269 = CARTESIAN_POINT ( 'NONE', ( -6.363244730678312400, -0.09709871898771187100, 1.776056736721017200 ) ) ; +#1270 = DIRECTION ( 'NONE', ( -2.891205793294678300E-016, -1.000000000000000000, 3.469446951953614200E-015 ) ) ; +#1271 = DIRECTION ( 'NONE', ( 2.602085213965211100E-016, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1272 = ORIENTED_EDGE ( 'NONE', *, *, #2604, .F. ) ; +#1273 = CARTESIAN_POINT ( 'NONE', ( -9.013199755282256500, -1.289692708592342600, 7.187500002369246100 ) ) ; +#1274 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.1100301479937505400, 1.020898033750306400 ) ) ; +#1275 = CIRCLE ( 'NONE', #1240, 2.500000000000000000 ) ; +#1276 = VERTEX_POINT ( 'NONE', #646 ) ; +#1277 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.009794386968475893600, 5.565433582957008500 ) ) ; +#1278 = CARTESIAN_POINT ( 'NONE', ( -8.669059211425027600, 0.05745521994344964000, 1.197163964540063400 ) ) ; +#1279 = ORIENTED_EDGE ( 'NONE', *, *, #690, .T. ) ; +#1280 = CARTESIAN_POINT ( 'NONE', ( -9.444530684304059100, 0.2313500262487753200, 1.216355609812093600 ) ) ; +#1281 = CARTESIAN_POINT ( 'NONE', ( 6.264620393852779600, -0.6008527496796329800, 3.420579329218287800 ) ) ; +#1282 = ADVANCED_FACE ( 'NONE', ( #2550 ), #602, .T. ) ; +#1283 = SECURITY_CLASSIFICATION ( '', '', #2178 ) ; +#1284 = FACE_OUTER_BOUND ( 'NONE', #793, .T. ) ; +#1285 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999978700, -0.9387505004004305100, 3.750000000000160300 ) ) ; +#1286 = ORIENTED_EDGE ( 'NONE', *, *, #2504, .T. ) ; +#1287 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -6.500000000000000900, 3.750000000000000000 ) ) ; +#1288 = LINE ( 'NONE', #16, #1415 ) ; +#1289 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.3449276475089512200, 5.555441110852007600 ) ) ; +#1290 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1291 = AXIS2_PLACEMENT_3D ( 'NONE', #1864, #1477, #951 ) ; +#1292 = VERTEX_POINT ( 'NONE', #721 ) ; +#1293 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1294 = ORIENTED_EDGE ( 'NONE', *, *, #1637, .T. ) ; +#1295 = CARTESIAN_POINT ( 'NONE', ( -7.240084348142628900, -0.6469456262863063600, 0.8132861667179842600 ) ) ; +#1296 = CARTESIAN_POINT ( 'NONE', ( -6.252560083468914300, -0.5702029647902837600, 3.410694346228178900 ) ) ; +#1297 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -2.500000000000003100, 2.500000000000000000 ) ) ; +#1298 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1299 = CARTESIAN_POINT ( 'NONE', ( -5.750090492854757200, -0.5721190838647751700, 3.408373419045285200 ) ) ; +#1300 = CARTESIAN_POINT ( 'NONE', ( 6.639404172397189700, -0.1639620307254599000, 5.869807251784784800 ) ) ; +#1301 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000001800, 1.249999999999999600, 12.50000000000000000 ) ) ; +#1302 = EDGE_CURVE ( 'NONE', #701, #1762, #2582, .T. ) ; +#1303 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.07463715628740164000, 5.901300236775859400 ) ) ; +#1304 = CARTESIAN_POINT ( 'NONE', ( -8.591829814332545100, 0.005184324483205791100, 1.198190355109647800 ) ) ; +#1305 = AXIS2_PLACEMENT_3D ( 'NONE', #2619, #2614, #2605 ) ; +#1306 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890690900, -0.2588190451025179100 ) ) ; +#1307 = CARTESIAN_POINT ( 'NONE', ( -6.750000000000000900, -0.3249748766718739700, 6.232584971874740800 ) ) ; +#1308 = AXIS2_PLACEMENT_3D ( 'NONE', #2585, #2581, #2576 ) ; +#1309 = CARTESIAN_POINT ( 'NONE', ( -6.249019673119438100, -0.8230389033601822600, 3.866502679993156100 ) ) ; +#1310 = CARTESIAN_POINT ( 'NONE', ( -9.444530684304414300, 0.2313500262490762500, 6.283644390187841800 ) ) ; +#1311 = CARTESIAN_POINT ( 'NONE', ( 7.955776129797381000, -1.083230067977063900, 7.061809940886274000 ) ) ; +#1312 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.3224802157393384900, 5.965830033276790600 ) ) ; +#1313 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999999100, 5.290063509461081300, 6.082531754730569100 ) ) ; +#1314 = ORIENTED_EDGE ( 'NONE', *, *, #2552, .T. ) ; +#1315 = PLANE ( 'NONE', #845 ) ; +#1316 = CARTESIAN_POINT ( 'NONE', ( 6.267176751789166100, -0.5363319534914461300, 3.357330624718510800 ) ) ; +#1317 = CIRCLE ( 'NONE', #1599, 2.291287847477919000 ) ; +#1318 = CARTESIAN_POINT ( 'NONE', ( -6.234037820248715900, -0.4181579352448491800, 3.595352277647720900 ) ) ; +#1319 = CARTESIAN_POINT ( 'NONE', ( 6.695218836398939100, -0.2292857428201218700, 6.063731485173113000 ) ) ; +#1320 = ORIENTED_EDGE ( 'NONE', *, *, #1196, .T. ) ; +#1321 = LINE ( 'NONE', #2505, #1242 ) ; +#1322 = ORIENTED_EDGE ( 'NONE', *, *, #2054, .F. ) ; +#1323 = CARTESIAN_POINT ( 'NONE', ( -9.104569261388373700, -1.535471621816443700, 6.231245127199907900 ) ) ; +#1324 = VECTOR ( 'NONE', #2113, 1000.000000000000000 ) ; +#1325 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #127, #2189, ( #1503 ) ) ; +#1326 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000794900, -0.1887085033109378300, 6.097749016902233700 ) ) ; +#1327 = FACE_OUTER_BOUND ( 'NONE', #321, .T. ) ; +#1328 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.2552283350445391800, 2.486889972313012900 ) ) ; +#1329 = ORIENTED_EDGE ( 'NONE', *, *, #1721, .T. ) ; +#1330 = CARTESIAN_POINT ( 'NONE', ( 6.249999999999999100, -0.9885298372043726000, 7.499999999999999100 ) ) ; +#1331 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.2459239244881928600, 6.239303131864768500 ) ) ; +#1332 = CARTESIAN_POINT ( 'NONE', ( -9.093837616627991900, 0.2487344114583999500, 6.336313898685434200 ) ) ; +#1333 = CARTESIAN_POINT ( 'NONE', ( -5.748823673678064200, -0.4038098291673559700, 3.612240459230969100 ) ) ; +#1334 = CARTESIAN_POINT ( 'NONE', ( 6.749999999999993800, -0.3249748766718569300, 6.232584971874713300 ) ) ; +#1335 = CARTESIAN_POINT ( 'NONE', ( -6.259196403375542900, -0.7158747907999514200, 4.019015143025341400 ) ) ; +#1336 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.289692704310192000, 7.187500000000002700 ) ) ; +#1337 = CARTESIAN_POINT ( 'NONE', ( -6.301104960321763900, -0.6018974851887493000, 3.240558138083547800 ) ) ; +#1338 = EDGE_CURVE ( 'NONE', #2266, #1276, #2520, .T. ) ; +#1339 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.3249748766718505400, 6.232584971874717700 ) ) ; +#1340 = AXIS2_PLACEMENT_3D ( 'NONE', #1032, #430, #1007 ) ; +#1341 = CARTESIAN_POINT ( 'NONE', ( -6.232616707451037500, -0.2937195162542348100, 3.801795010273096400 ) ) ; +#1342 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1343 = AXIS2_PLACEMENT_3D ( 'NONE', #2405, #1675, #1610 ) ; +#1344 = CARTESIAN_POINT ( 'NONE', ( 6.631265858612827000, -2.234499733608933200, 7.500000000000001800 ) ) ; +#1345 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.499999999999997600, 1.248990654325015800 ) ) ; +#1346 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.9387505004003841000, 3.749999999999978700 ) ) ; +#1347 = ORIENTED_EDGE ( 'NONE', *, *, #1221, .T. ) ; +#1348 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1349 = VECTOR ( 'NONE', #681, 1000.000000000000100 ) ; +#1350 = VERTEX_POINT ( 'NONE', #536 ) ; +#1351 = CARTESIAN_POINT ( 'NONE', ( -5.761035676898172800, -0.2698434879239823300, 3.841022715868961200 ) ) ; +#1352 = CARTESIAN_POINT ( 'NONE', ( 6.352867507378953800, -0.2395702669571623300, 2.821501574539251800 ) ) ; +#1353 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.1100301479937757800, 6.479101966249649200 ) ) ; +#1354 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999863200, -0.8236800419108577500, 3.869769130490361900 ) ) ; +#1355 = ORIENTED_EDGE ( 'NONE', *, *, #428, .T. ) ; +#1356 = CARTESIAN_POINT ( 'NONE', ( -6.301104960321787000, -0.6018974851887012300, 4.259441861916560200 ) ) ; +#1357 = CYLINDRICAL_SURFACE ( 'NONE', #264, 2.500000000000000400 ) ; +#1358 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000000, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#1359 = EDGE_CURVE ( 'NONE', #1012, #1413, #2494, .T. ) ; +#1360 = CIRCLE ( 'NONE', #276, 3.000000000000000000 ) ; +#1361 = ORIENTED_EDGE ( 'NONE', *, *, #223, .T. ) ; +#1362 = VERTEX_POINT ( 'NONE', #437 ) ; +#1363 = ORIENTED_EDGE ( 'NONE', *, *, #255, .T. ) ; +#1364 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1365 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1366 = CARTESIAN_POINT ( 'NONE', ( -6.270481662090636700, -0.1570584232506690400, 4.115964466998664600 ) ) ; +#1367 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1368 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.734723475976807100E-016, 0.0000000000000000000 ) ) ; +#1369 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -2.500000000000001800, 2.500000000000000400 ) ) ; +#1370 = CARTESIAN_POINT ( 'NONE', ( 6.449117804056355000, -0.1215186784077858900, 2.374549509582962100 ) ) ; +#1371 = CARTESIAN_POINT ( 'NONE', ( -9.795704756372449800, -1.500000000000002700, 0.4612499999999918900 ) ) ; +#1372 = CARTESIAN_POINT ( 'NONE', ( -5.811325955962383100, -0.1273718567738536500, 4.201662792209367200 ) ) ; +#1373 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#1374 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, 0.0000000000000000000, 4.999999999999999100 ) ) ; +#1375 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #154, #2197, ( #1503 ) ) ; +#1376 = CARTESIAN_POINT ( 'NONE', ( 6.622954869362065000, -0.1466816237726408200, 1.688245161204065000 ) ) ; +#1377 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.289692704310186200, 0.3124999999999990000 ) ) ; +#1378 = CARTESIAN_POINT ( 'NONE', ( -9.818472803525359900, -1.500000000000002700, 1.333338821808145900 ) ) ; +#1379 = CARTESIAN_POINT ( 'NONE', ( -6.319799177876065600, -0.5712553360118003400, 4.342787892022947500 ) ) ; +#1380 = ORIENTED_EDGE ( 'NONE', *, *, #2654, .F. ) ; +#1381 = VECTOR ( 'NONE', #1069, 1000.000000000000000 ) ; +#1382 = VERTEX_POINT ( 'NONE', #445 ) ; +#1383 = CARTESIAN_POINT ( 'NONE', ( 8.644172060088729700, -1.289692704310186000, 0.3124999999999991700 ) ) ; +#1384 = LINE ( 'NONE', #2522, #1324 ) ; +#1385 = PLANE ( 'NONE', #2087 ) ; +#1386 = ORIENTED_EDGE ( 'NONE', *, *, #2460, .T. ) ; +#1387 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1388 = FACE_OUTER_BOUND ( 'NONE', #905, .T. ) ; +#1389 = VERTEX_POINT ( 'NONE', #528 ) ; +#1390 = CARTESIAN_POINT ( 'NONE', ( -6.290013069862560300, -0.1186612141470115800, 4.223949568033597200 ) ) ; +#1391 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -5.000000000000000900, 6.183475024125991500 ) ) ; +#1392 = EDGE_CURVE ( 'NONE', #1012, #1931, #2468, .T. ) ; +#1393 = ORIENTED_EDGE ( 'NONE', *, *, #122, .T. ) ; +#1394 = CARTESIAN_POINT ( 'NONE', ( 8.538606649175410000, -1.276555636109518100, 0.3196580291525928400 ) ) ; +#1395 = ORIENTED_EDGE ( 'NONE', *, *, #2099, .F. ) ; +#1396 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.839107728028796700E-016, 0.0000000000000000000 ) ) ; +#1397 = ADVANCED_FACE ( 'NONE', ( #2526 ), #1168, .F. ) ; +#1398 = AXIS2_PLACEMENT_3D ( 'NONE', #1575, #1535, #261 ) ; +#1399 = CARTESIAN_POINT ( 'NONE', ( -11.25000000000000000, -6.500000000000000900, 7.500000000000000000 ) ) ; +#1400 = CARTESIAN_POINT ( 'NONE', ( -5.833759012863250600, -0.08906916515868584800, 4.326681837145084600 ) ) ; +#1401 = CARTESIAN_POINT ( 'NONE', ( -9.724914359541211100, -1.879060172822371900, 6.052789034709872100 ) ) ; +#1402 = CARTESIAN_POINT ( 'NONE', ( 8.336133157170436900, -1.230451158550247800, 0.3461771287898965400 ) ) ; +#1403 = CARTESIAN_POINT ( 'NONE', ( 8.079200516305141000, -1.356532417238684800, 6.159672177691899000 ) ) ; +#1404 = EDGE_CURVE ( 'NONE', #1647, #969, #2440, .T. ) ; +#1405 = CARTESIAN_POINT ( 'NONE', ( -6.365846649954284500, -0.5267959145697660400, 4.507024652337454600 ) ) ; +#1406 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000001800, 0.3371719528396084900, 5.416036146089028100 ) ) ; +#1407 = ADVANCED_FACE ( 'NONE', ( #2590 ), #2385, .T. ) ; +#1408 = CARTESIAN_POINT ( 'NONE', ( 8.238829408760558700, -1.197923389952626000, 0.3653656646854368500 ) ) ; +#1409 = ORIENTED_EDGE ( 'NONE', *, *, #2507, .T. ) ; +#1410 = CIRCLE ( 'NONE', #1846, 2.500000000000002200 ) ; +#1411 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.673617379884033500E-016, 1.000000000000000000 ) ) ; +#1412 = CARTESIAN_POINT ( 'NONE', ( 8.643664488573325100, -1.289692692354281500, 7.187499993384998100 ) ) ; +#1413 = VERTEX_POINT ( 'NONE', #2267 ) ; +#1414 = CARTESIAN_POINT ( 'NONE', ( 6.511911571493080900, -1.968759057817338200, 7.500000000000000900 ) ) ; +#1415 = VECTOR ( 'NONE', #1470, 1000.000000000000000 ) ; +#1416 = CARTESIAN_POINT ( 'NONE', ( 7.744343482391319500, -1.174709019033811000, 6.043397875169136800 ) ) ; +#1417 = DESIGN_CONTEXT ( 'detailed design', #2294, 'design' ) ; +#1418 = ORIENTED_EDGE ( 'NONE', *, *, #2401, .T. ) ; +#1419 = TOROIDAL_SURFACE ( 'NONE', #284, 3.000000000000000000, 0.5000000000000000000 ) ; +#1420 = CARTESIAN_POINT ( 'NONE', ( -9.275017770399349700, -1.324488468068453700, 7.159183217459236900 ) ) ; +#1421 = ORIENTED_EDGE ( 'NONE', *, *, #2260, .T. ) ; +#1422 = VECTOR ( 'NONE', #125, 1000.000000000000000 ) ; +#1423 = ORIENTED_EDGE ( 'NONE', *, *, #2415, .T. ) ; +#1424 = CARTESIAN_POINT ( 'NONE', ( 7.955040195475970900, -1.082787106905237300, 0.4385013724500448400 ) ) ; +#1425 = CARTESIAN_POINT ( 'NONE', ( 7.632064662265509700, -1.107514553127537900, 5.991712839626131000 ) ) ; +#1426 = CARTESIAN_POINT ( 'NONE', ( -6.341787547819825100, -0.05843129396322622300, 4.433886593402657000 ) ) ; +#1427 = ORIENTED_EDGE ( 'NONE', *, *, #2099, .T. ) ; +#1428 = CC_DESIGN_APPROVAL ( #1464, ( #1503 ) ) ; +#1429 = CARTESIAN_POINT ( 'NONE', ( -9.275017770399166700, -1.324488468068503600, 0.3408167825406683800 ) ) ; +#1430 = CARTESIAN_POINT ( 'NONE', ( 7.782117387460014700, -0.9862535926049075300, 0.5062606432724149300 ) ) ; +#1431 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000900, 0.3299626934600718400, 1.670966274166866100 ) ) ; +#1432 = CARTESIAN_POINT ( 'NONE', ( -5.889015980533170800, -0.03349489806827050900, 4.573036979395518600 ) ) ; +#1433 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.734723475976807100E-016, 0.0000000000000000000 ) ) ; +#1434 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.9387505004003964300, 3.749999999999992900 ) ) ; +#1435 = CARTESIAN_POINT ( 'NONE', ( 7.457129117987053100, -0.7903116737813697900, 0.6715059104121189300 ) ) ; +#1436 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.531754163448153700, 1.249999999999997300 ) ) ; +#1437 = EDGE_CURVE ( 'NONE', #1531, #1720, #1763, .T. ) ; +#1438 = CARTESIAN_POINT ( 'NONE', ( -6.393195612716003700, -0.5125597263190324600, 4.588436340476879300 ) ) ; +#1439 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1440 = AXIS2_PLACEMENT_3D ( 'NONE', #904, #2376, #1540 ) ; +#1441 = VERTEX_POINT ( 'NONE', #2478 ) ; +#1442 = ORIENTED_EDGE ( 'NONE', *, *, #1692, .F. ) ; +#1443 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.507377426653430100, 6.250594578820735800 ) ) ; +#1444 = AXIS2_PLACEMENT_3D ( 'NONE', #1696, #1306, #258 ) ; +#1445 = LINE ( 'NONE', #293, #2546 ) ; +#1446 = CARTESIAN_POINT ( 'NONE', ( -8.927730531804659400, -1.507377672391791800, 1.249405421294220900 ) ) ; +#1447 = ORIENTED_EDGE ( 'NONE', *, *, #1982, .T. ) ; +#1448 = CARTESIAN_POINT ( 'NONE', ( 7.303312982322234200, -0.6887816956681879200, 0.7703055697757392700 ) ) ; +#1449 = FACE_OUTER_BOUND ( 'NONE', #1022, .T. ) ; +#1450 = CARTESIAN_POINT ( 'NONE', ( 6.252560083468905500, -0.5702029647901877300, 3.410694346228293500 ) ) ; +#1451 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#1452 = ORIENTED_EDGE ( 'NONE', *, *, #815, .T. ) ; +#1453 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1454 = FACE_OUTER_BOUND ( 'NONE', #837, .T. ) ; +#1455 = ORIENTED_EDGE ( 'NONE', *, *, #442, .F. ) ; +#1456 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, 0.2487358244187994100, 6.336313132700327700 ) ) ; +#1457 = ORIENTED_EDGE ( 'NONE', *, *, #2626, .T. ) ; +#1458 = CARTESIAN_POINT ( 'NONE', ( -9.093837616628251300, 0.2487344114576655100, 1.163686101314779200 ) ) ; +#1459 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 1.741936567896977200, 10.00000000000000000 ) ) ; +#1460 = ORIENTED_EDGE ( 'NONE', *, *, #3, .F. ) ; +#1461 = CARTESIAN_POINT ( 'NONE', ( 6.319799177876099300, -0.5712553360117710300, 4.342787892023072700 ) ) ; +#1462 = CARTESIAN_POINT ( 'NONE', ( -6.374280101213793500, -0.03594650085745106800, 4.537464084170119700 ) ) ; +#1463 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1345, #1098, #1072, #1070 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0005517879182953812300, 0.0008237949265464064200 ), + .UNSPECIFIED. ) ; +#1464 = APPROVAL ( #2228, 'UNSPECIFIED' ) ; +#1465 = CARTESIAN_POINT ( 'NONE', ( -9.013199755282403900, -1.289692708592298200, 0.3124999976307783500 ) ) ; +#1466 = CARTESIAN_POINT ( 'NONE', ( 6.750000000000000900, -0.3249748766718710800, 1.267415028125261400 ) ) ; +#1467 = CARTESIAN_POINT ( 'NONE', ( 6.139683787903978300, -0.01417940191215630000, 5.290416788008872800 ) ) ; +#1468 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1469 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.531754163448149300, 0.7499999999999993300 ) ) ; +#1470 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1471 = LINE ( 'NONE', #1313, #2575 ) ; +#1472 = CARTESIAN_POINT ( 'NONE', ( -5.921834734243228500, -0.01569965501630831600, 4.695154511004601800 ) ) ; +#1473 = CARTESIAN_POINT ( 'NONE', ( -6.750000000000000900, -2.500000000000003100, 4.999999999999999100 ) ) ; +#1474 = CARTESIAN_POINT ( 'NONE', ( 7.311155539930846100, -0.07826340576597749800, 5.823238669132683400 ) ) ; +#1475 = VERTEX_POINT ( 'NONE', #1898 ) ; +#1476 = EDGE_CURVE ( 'NONE', #1350, #385, #2043, .T. ) ; +#1477 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1478 = FACE_OUTER_BOUND ( 'NONE', #366, .T. ) ; +#1479 = AXIS2_PLACEMENT_3D ( 'NONE', #685, #1945, #491 ) ; +#1480 = ORIENTED_EDGE ( 'NONE', *, *, #580, .T. ) ; +#1481 = CIRCLE ( 'NONE', #325, 0.4999999999999995600 ) ; +#1482 = CARTESIAN_POINT ( 'NONE', ( 7.011836910196172400, -0.4955379215854458500, 0.9985052966815246600 ) ) ; +#1483 = CARTESIAN_POINT ( 'NONE', ( -6.493565291164658000, -0.4983435954862061600, 2.670099483616013900 ) ) ; +#1484 = ORIENTED_EDGE ( 'NONE', *, *, #50, .F. ) ; +#1485 = VECTOR ( 'NONE', #2598, 1000.000000000000000 ) ; +#1486 = VERTEX_POINT ( 'NONE', #1665 ) ; +#1487 = CARTESIAN_POINT ( 'NONE', ( -8.643664488573394400, -1.289692692353995500, 0.3125000066151604700 ) ) ; +#1488 = CIRCLE ( 'NONE', #343, 2.500000000000000400 ) ; +#1489 = ORIENTED_EDGE ( 'NONE', *, *, #714, .T. ) ; +#1490 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -2.500000000000003100, 4.999999999999999100 ) ) ; +#1491 = ORIENTED_EDGE ( 'NONE', *, *, #1083, .F. ) ; +#1492 = CARTESIAN_POINT ( 'NONE', ( -7.782117387460018200, -0.9862535926049120800, 6.993739356727588500 ) ) ; +#1493 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1494 = ADVANCED_FACE ( 'NONE', ( #2473 ), #390, .T. ) ; +#1495 = EDGE_CURVE ( 'NONE', #1952, #1215, #777, .T. ) ; +#1496 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1497 = CARTESIAN_POINT ( 'NONE', ( -5.998250311278266800, 0.002136308605184460200, 2.563189155766982400 ) ) ; +#1498 = CARTESIAN_POINT ( 'NONE', ( -6.847020099932631600, 0.0002736713338059532700, 2.108287766126337700 ) ) ; +#1499 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #184, #1677, #1206, #2472, #1001, #2265, #796, #2065, #597, #1850, #396, #1642, #176, #1416, #2643, #1200, #2458, #994 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0006963764730306292800, 0.001197750592113830000, 0.001699124711197030700, 0.002200498830280231200, 0.002701872949363432200, 0.003203247068446632700, 0.003704621187529833600, 0.004205995306613034100, 0.004707369425696234600 ), + .UNSPECIFIED. ) ; +#1500 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1501 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1502 = CARTESIAN_POINT ( 'NONE', ( -6.252579707117892100, -0.7595894551974024000, 3.905309495151784800 ) ) ; +#1503 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #301, .NOT_KNOWN. ) ; +#1504 = DIRECTION ( 'NONE', ( 1.387778780781445700E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1505 = CARTESIAN_POINT ( 'NONE', ( 6.876546911529640500, -0.4051536019661994300, 1.125931279863797900 ) ) ; +#1506 = CARTESIAN_POINT ( 'NONE', ( -9.464597736616848800, -1.375402298158988800, 0.3769192533511248600 ) ) ; +#1507 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1508 = CARTESIAN_POINT ( 'NONE', ( -7.491736956767795200, -1.017556497632671200, 1.583857442206905400 ) ) ; +#1509 = CARTESIAN_POINT ( 'NONE', ( -6.456875258551980900, -0.4982909508098632400, 4.749540563014984500 ) ) ; +#1510 = CARTESIAN_POINT ( 'NONE', ( -11.04128784747791800, -1.500000000000003100, 2.500000000000000000 ) ) ; +#1511 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1512 = CARTESIAN_POINT ( 'NONE', ( -6.451872049912361200, -0.003648061073866036300, 4.740047523730350300 ) ) ; +#1513 = ORIENTED_EDGE ( 'NONE', *, *, #1404, .T. ) ; +#1514 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1515 = ORIENTED_EDGE ( 'NONE', *, *, #899, .T. ) ; +#1516 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -2.500000000000003100, 2.500000000000000000 ) ) ; +#1517 = LINE ( 'NONE', #2601, #1712 ) ; +#1518 = ORIENTED_EDGE ( 'NONE', *, *, #580, .F. ) ; +#1519 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.507377426653428800, 1.249405421179263800 ) ) ; +#1520 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #246, #2244, ( #1713 ) ) ; +#1521 = LINE ( 'NONE', #1586, #1422 ) ; +#1522 = DIRECTION ( 'NONE', ( 2.602085213965211100E-016, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1523 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999999100, -0.9885298372043732600, 7.531980600529456400E-033 ) ) ; +#1524 = ORIENTED_EDGE ( 'NONE', *, *, #1359, .F. ) ; +#1525 = CARTESIAN_POINT ( 'NONE', ( -5.998250311278353000, 0.002136308605190787200, 4.936810844233193900 ) ) ; +#1526 = CYLINDRICAL_SURFACE ( 'NONE', #375, 2.500000000000000000 ) ; +#1527 = AXIS2_PLACEMENT_3D ( 'NONE', #1934, #1711, #1500 ) ; +#1528 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2283, #2217, #2194 ), + ( #2183, #2175, #2169 ), + ( #2161, #2144, #2136 ), + ( #2129, #2128, #2119 ), + ( #2105, #2103, #2093 ), + ( #2088, #2072, #2066 ), + ( #2061, #2056, #2044 ), + ( #2038, #2035, #2031 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 1.084202172485504400E-019, 0.0006277702842063099000, 0.0009416554263094648400, 0.001255540568412619800 ), + ( 0.0000000000000000000, 0.9752759569245592600 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.2685430323065799400, 0.9638308528458332500), + ( 1.000000000000000000, 0.2685406068167988100, 0.9638307329100055400), + ( 1.000000000000000000, 0.2640642240688794700, 0.9636093843502422400), + ( 1.000000000000000000, 0.2506048976106196600, 0.9629438464160012800), + ( 1.000000000000000000, 0.2450754525487700000, 0.9626704259402163500), + ( 1.000000000000000000, 0.2320127022785532200, 0.9620244979394871900), + ( 1.000000000000000000, 0.2244028032026798800, 0.9616482029943840300), + ( 1.000000000000000000, 0.2161332762312377100, 0.9612392907122729900) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1529 = ORIENTED_EDGE ( 'NONE', *, *, #122, .F. ) ; +#1530 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 1.741936567896977200, 12.50000000000000000 ) ) ; +#1531 = VERTEX_POINT ( 'NONE', #441 ) ; +#1532 = CARTESIAN_POINT ( 'NONE', ( -6.493565291164706800, -0.4983435954862471800, 4.829900516384085100 ) ) ; +#1533 = CARTESIAN_POINT ( 'NONE', ( -7.485866380957720200, -1.014682840062841600, 5.911702558512373300 ) ) ; +#1534 = CARTESIAN_POINT ( 'NONE', ( 6.558364358243371100, -0.1189776701491884200, 1.935225860995878800 ) ) ; +#1535 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1536 = CARTESIAN_POINT ( 'NONE', ( -8.538606649175408200, -1.276555636109524500, 7.180341970847409000 ) ) ; +#1537 = EDGE_CURVE ( 'NONE', #1475, #741, #2382, .T. ) ; +#1538 = CARTESIAN_POINT ( 'NONE', ( -6.750000000000001800, -2.500000000000003100, 2.500000000000000000 ) ) ; +#1539 = AXIS2_PLACEMENT_3D ( 'NONE', #1262, #848, #648 ) ; +#1540 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1541 = ADVANCED_FACE ( 'NONE', ( #2438 ), #2314, .F. ) ; +#1542 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1543 = CARTESIAN_POINT ( 'NONE', ( 6.249999999999998200, -0.06440818146706581100, 2.760697958122190400 ) ) ; +#1544 = AXIS2_PLACEMENT_3D ( 'NONE', #1287, #44, #1926 ) ; +#1545 = CARTESIAN_POINT ( 'NONE', ( -6.497972648085911900, 0.006132037403090443700, 4.840719439615655000 ) ) ; +#1546 = CARTESIAN_POINT ( 'NONE', ( 11.04128784747791800, -1.499999999999996900, 4.999999999999999100 ) ) ; +#1547 = CARTESIAN_POINT ( 'NONE', ( -5.750090492854758000, -0.5721190838648972900, 4.091626580954862600 ) ) ; +#1548 = CYLINDRICAL_SURFACE ( 'NONE', #1291, 1.200000000000000600 ) ; +#1549 = CIRCLE ( 'NONE', #1308, 1.199999999999999700 ) ; +#1550 = CARTESIAN_POINT ( 'NONE', ( 6.750000000000000900, -2.500000000000001800, 7.500000000000000000 ) ) ; +#1551 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.734723475976807100E-016, 0.0000000000000000000 ) ) ; +#1552 = ORIENTED_EDGE ( 'NONE', *, *, #1245, .T. ) ; +#1553 = CARTESIAN_POINT ( 'NONE', ( -8.750000000000000000, -6.500000000000000900, 4.949999999999999300 ) ) ; +#1554 = LINE ( 'NONE', #841, #1985 ) ; +#1555 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2261, #2539, #2182 ), + ( #2177, #2174, #2156 ), + ( #2142, #2134, #2122 ), + ( #2100, #2095, #2091 ), + ( #2084, #2070, #2063 ), + ( #2050, #2033, #2013 ), + ( #2008, #2001, #1979 ), + ( #1975, #1966, #1950 ), + ( #1902, #1882, #1874 ), + ( #1868, #1860, #1844 ), + ( #1837, #1811, #1803 ), + ( #1790, #1784, #1780 ), + ( #1774, #1764, #1746 ), + ( #1743, #1733, #1691 ), + ( #1668, #1662, #1658 ), + ( #1641, #1632, #1613 ), + ( #1593, #1584, #1571 ), + ( #1565, #1545, #1532 ), + ( #1525, #1512, #1509 ), + ( #1472, #1462, #1438 ), + ( #1432, #1426, #1405 ), + ( #1400, #1390, #1379 ), + ( #1372, #1366, #1356 ), + ( #1351, #1341, #1335 ), + ( #1333, #1318, #1309 ), + ( #1299, #1296, #1253 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -4.065758146820641600E-020, 0.0003117651199006324300, 0.0006235302398012648500, 0.0009352953597018972200, 0.001247060479602529700, 0.001870590719403794400, 0.002494120959205059400, 0.003117651199006324400, 0.003429416318906956600, 0.003741181438807588900, 0.004052946558708221200, 0.004364711678608853400, 0.004988241918410118800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.2499999999999987000, 1.000000000000000000), + ( 1.000000000000000000, 0.2499760950583189700, 1.000000000000000000), + ( 1.000000000000000000, 0.2545484055413929600, 1.000000000000000000), + ( 1.000000000000000000, 0.2704677616994914400, 1.000000000000000000), + ( 1.000000000000000000, 0.2817695917743522900, 1.000000000000000000), + ( 1.000000000000000000, 0.3084315763333369000, 1.000000000000000000), + ( 1.000000000000000000, 0.3236487628465231600, 1.000000000000000000), + ( 1.000000000000000000, 0.3554114645799360500, 1.000000000000000000), + ( 1.000000000000000000, 0.3720577744228378800, 1.000000000000000000), + ( 1.000000000000000000, 0.4228250297224405700, 1.000000000000000000), + ( 1.000000000000000000, 0.4580224156112640600, 1.000000000000000000), + ( 1.000000000000000000, 0.5253830961241017200, 1.000000000000000000), + ( 1.000000000000000000, 0.5575090605478078000, 1.000000000000000000), + ( 1.000000000000000000, 0.6166529525240364000, 1.000000000000000000), + ( 1.000000000000000000, 0.6439460129196684600, 1.000000000000000000), + ( 1.000000000000000000, 0.6772031439453027900, 1.000000000000000000), + ( 1.000000000000000000, 0.6870934825343241200, 1.000000000000000000), + ( 1.000000000000000000, 0.7041608022264732600, 1.000000000000000000), + ( 1.000000000000000000, 0.7112385613049755400, 1.000000000000000000), + ( 1.000000000000000000, 0.7219798917372050000, 1.000000000000000000), + ( 1.000000000000000000, 0.7257212178203525900, 1.000000000000000000), + ( 1.000000000000000000, 0.7298933834737454400, 1.000000000000000000), + ( 1.000000000000000000, 0.7302798788495376000, 1.000000000000000000), + ( 1.000000000000000000, 0.7266576654487209000, 1.000000000000000000), + ( 1.000000000000000000, 0.7178969860314845500, 1.000000000000000000), + ( 1.000000000000000000, 0.7053563207170361300, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1556 = CARTESIAN_POINT ( 'NONE', ( -9.464597736608215700, -1.375402298156836600, 7.123080746650444400 ) ) ; +#1557 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1558 = CARTESIAN_POINT ( 'NONE', ( -6.290013069862574500, -0.1186612141471001000, 3.276050431966439600 ) ) ; +#1559 = ORIENTED_EDGE ( 'NONE', *, *, #1061, .T. ) ; +#1560 = EDGE_CURVE ( 'NONE', #1762, #1684, #2348, .T. ) ; +#1561 = LINE ( 'NONE', #470, #1564 ) ; +#1562 = VERTEX_POINT ( 'NONE', #2521 ) ; +#1563 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1564 = VECTOR ( 'NONE', #1290, 1000.000000000000000 ) ; +#1565 = CARTESIAN_POINT ( 'NONE', ( -6.042278350797580800, 0.002070511665763190400, 5.057350774082010500 ) ) ; +#1566 = ORIENTED_EDGE ( 'NONE', *, *, #2386, .T. ) ; +#1567 = AXIS2_PLACEMENT_3D ( 'NONE', #73, #108, #78 ) ; +#1568 = VECTOR ( 'NONE', #1719, 1000.000000000000000 ) ; +#1569 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.734723475976807300E-016, 0.0000000000000000000 ) ) ; +#1570 = VERTEX_POINT ( 'NONE', #75 ) ; +#1571 = CARTESIAN_POINT ( 'NONE', ( -6.574736491086530200, -0.5113435167108220100, 4.985277858343089900 ) ) ; +#1572 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.289692704310192000, 7.187500000000002700 ) ) ; +#1573 = ORIENTED_EDGE ( 'NONE', *, *, #652, .F. ) ; +#1574 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1575 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -6.500000000000000900, 4.999999999999999100 ) ) ; +#1576 = ADVANCED_FACE ( 'NONE', ( #2410 ), #1315, .T. ) ; +#1577 = CARTESIAN_POINT ( 'NONE', ( -6.306797289060906300, -0.5794478070834464500, 4.300278949544857500 ) ) ; +#1578 = CARTESIAN_POINT ( 'NONE', ( -8.644172060088728000, -1.289692704310192500, 7.187500000000003600 ) ) ; +#1579 = CARTESIAN_POINT ( 'NONE', ( -7.303312982322238700, -0.6887816956681914700, 6.729694430224260900 ) ) ; +#1580 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #320, #2256, ( #1713 ) ) ; +#1581 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1582 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1583 = AXIS2_PLACEMENT_3D ( 'NONE', #1, #1685, #2127 ) ; +#1584 = CARTESIAN_POINT ( 'NONE', ( -6.601089278863586400, 0.01506555848615567300, 5.033280610174956300 ) ) ; +#1585 = CARTESIAN_POINT ( 'NONE', ( -8.336133157170436900, -1.230451158550254400, 7.153822871210105700 ) ) ; +#1586 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000000400, -2.500000000000000400, 7.500000000000000000 ) ) ; +#1587 = ORIENTED_EDGE ( 'NONE', *, *, #1204, .T. ) ; +#1588 = CARTESIAN_POINT ( 'NONE', ( -8.750000000000000000, -6.500000000000000900, 3.750000000000000000 ) ) ; +#1589 = VERTEX_POINT ( 'NONE', #2165 ) ; +#1590 = CARTESIAN_POINT ( 'NONE', ( -8.238829408760558700, -1.197923389952630300, 7.134634335314566500 ) ) ; +#1591 = CARTESIAN_POINT ( 'NONE', ( -9.964272585342973400, -1.500000000000003100, 0.5596607664229247300 ) ) ; +#1592 = ORIENTED_EDGE ( 'NONE', *, *, #2631, .T. ) ; +#1593 = CARTESIAN_POINT ( 'NONE', ( -6.139683787903937400, -0.01417940191214266600, 5.290416788008728900 ) ) ; +#1594 = LINE ( 'NONE', #723, #1485 ) ; +#1595 = CARTESIAN_POINT ( 'NONE', ( -6.750000000000000900, -0.3249748766718739700, 6.232584971874740800 ) ) ; +#1596 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.8416876048223040900, 7.500000000000000000 ) ) ; +#1597 = ORIENTED_EDGE ( 'NONE', *, *, #1828, .F. ) ; +#1598 = EDGE_CURVE ( 'NONE', #2463, #1694, #1669, .T. ) ; +#1599 = AXIS2_PLACEMENT_3D ( 'NONE', #1059, #1271, #2525 ) ; +#1600 = CIRCLE ( 'NONE', #415, 2.500000000000000000 ) ; +#1601 = CARTESIAN_POINT ( 'NONE', ( -7.955040195475974400, -1.082787106905241700, 7.061498627549958100 ) ) ; +#1602 = ORIENTED_EDGE ( 'NONE', *, *, #1692, .T. ) ; +#1603 = CARTESIAN_POINT ( 'NONE', ( 6.685537144261249200, -0.2123742244524367800, 1.466110658097042400 ) ) ; +#1604 = ADVANCED_FACE ( 'NONE', ( #2344, #2311 ), #2362, .T. ) ; +#1605 = ORIENTED_EDGE ( 'NONE', *, *, #2000, .T. ) ; +#1606 = AXIS2_PLACEMENT_3D ( 'NONE', #624, #105, #100 ) ; +#1607 = ORIENTED_EDGE ( 'NONE', *, *, #1943, .F. ) ; +#1608 = CARTESIAN_POINT ( 'NONE', ( -9.524441295960347300, -1.500000000000002400, 1.325858692666709300 ) ) ; +#1609 = DATE_AND_TIME ( #1451, #17 ) ; +#1610 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1611 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1612 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1613 = CARTESIAN_POINT ( 'NONE', ( -6.618815831353373400, -0.5240946160487943700, 5.059739064815502700 ) ) ; +#1614 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1615 = ADVANCED_FACE ( 'NONE', ( #2377 ), #2252, .T. ) ; +#1616 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1617 = CC_DESIGN_APPROVAL ( #1664, ( #1713 ) ) ; +#1618 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.499999999999997600, 4.999999999999999100 ) ) ; +#1619 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -2.500000000000001800, 4.999999999999999100 ) ) ; +#1620 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999999100, -5.000000000000000900, 7.500000000000000000 ) ) ; +#1621 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000000, -6.500000000000000900, 4.999999999999999100 ) ) ; +#1622 = ORIENTED_EDGE ( 'NONE', *, *, #1338, .T. ) ; +#1623 = FACE_OUTER_BOUND ( 'NONE', #960, .T. ) ; +#1624 = VERTEX_POINT ( 'NONE', #1510 ) ; +#1625 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.249999999999999600, 0.0000000000000000000 ) ) ; +#1626 = VECTOR ( 'NONE', #872, 1000.000000000000000 ) ; +#1627 = ORIENTED_EDGE ( 'NONE', *, *, #2618, .F. ) ; +#1628 = ADVANCED_FACE ( 'NONE', ( #2269 ), #2276, .T. ) ; +#1629 = LINE ( 'NONE', #2356, #1568 ) ; +#1630 = CARTESIAN_POINT ( 'NONE', ( 8.669059211424880100, 0.05745521994328271100, 6.302836035459890200 ) ) ; +#1631 = ORIENTED_EDGE ( 'NONE', *, *, #2325, .T. ) ; +#1632 = CARTESIAN_POINT ( 'NONE', ( -6.658267548863136700, 0.01411132347729666800, 5.125103120104163200 ) ) ; +#1633 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000900, 0.2552389852517316600, 5.013144287362768700 ) ) ; +#1634 = FACE_OUTER_BOUND ( 'NONE', #658, .T. ) ; +#1635 = EDGE_CURVE ( 'NONE', #2075, #1413, #2308, .T. ) ; +#1636 = ORIENTED_EDGE ( 'NONE', *, *, #2631, .F. ) ; +#1637 = EDGE_CURVE ( 'NONE', #807, #2497, #2279, .T. ) ; +#1638 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 3.556183125752454500E-015, 1.000000000000000000 ) ) ; +#1639 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1640 = CARTESIAN_POINT ( 'NONE', ( 8.661387073916190000, -1.531754153874337600, 6.250000000000000000 ) ) ; +#1641 = CARTESIAN_POINT ( 'NONE', ( -6.192578998272285400, -0.03011826609224189200, 5.402108597512117200 ) ) ; +#1642 = CARTESIAN_POINT ( 'NONE', ( 7.361399618891745400, -0.9340995379406381600, 5.834083286337614600 ) ) ; +#1643 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -5.000000000000000900, 6.183475024125991500 ) ) ; +#1644 = CARTESIAN_POINT ( 'NONE', ( 7.491736956767857300, -1.017556497632660800, 5.916142557793127900 ) ) ; +#1645 = EDGE_CURVE ( 'NONE', #1663, #1012, #2655, .T. ) ; +#1646 = CARTESIAN_POINT ( 'NONE', ( 9.104569261388377300, -1.535471621816390000, 1.268754872800094600 ) ) ; +#1647 = VERTEX_POINT ( 'NONE', #474 ) ; +#1648 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.289692704310186200, 0.3124999999999990000 ) ) ; +#1649 = VECTOR ( 'NONE', #1025, 1000.000000000000100 ) ; +#1650 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.2311068069728648400, 1.268619002032557000 ) ) ; +#1651 = ORIENTED_EDGE ( 'NONE', *, *, #2159, .T. ) ; +#1652 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1653 = ORIENTED_EDGE ( 'NONE', *, *, #1843, .T. ) ; +#1654 = LINE ( 'NONE', #1081, #1626 ) ; +#1655 = CARTESIAN_POINT ( 'NONE', ( -7.457129117987054900, -0.7903116737813739000, 6.828494089587883000 ) ) ; +#1656 = ORIENTED_EDGE ( 'NONE', *, *, #690, .F. ) ; +#1657 = CYLINDRICAL_SURFACE ( 'NONE', #377, 2.500000000000000000 ) ; +#1658 = CARTESIAN_POINT ( 'NONE', ( -6.761037276645773800, -0.5776789688401775500, 5.274295509237806100 ) ) ; +#1659 = ORIENTED_EDGE ( 'NONE', *, *, #1707, .F. ) ; +#1660 = CARTESIAN_POINT ( 'NONE', ( -7.783067766059522400, -0.9867963150768577200, 0.5058446967603187300 ) ) ; +#1661 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1662 = CARTESIAN_POINT ( 'NONE', ( -6.847020099932471700, 0.0002736713336158925800, 5.391712233873509100 ) ) ; +#1663 = VERTEX_POINT ( 'NONE', #1715 ) ; +#1664 = APPROVAL ( #2273, 'UNSPECIFIED' ) ; +#1665 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.8416876048223040900, 7.500000000000000000 ) ) ; +#1666 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1667 = CARTESIAN_POINT ( 'NONE', ( 5.748823673678065100, -0.4038098291672396200, 3.612240459231135200 ) ) ; +#1668 = CARTESIAN_POINT ( 'NONE', ( -6.363244730678451900, -0.09709871898772112800, 5.723943263278982000 ) ) ; +#1669 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #686, #267, #1923, #2544 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.938893903907228400E-018, 0.0002720070082493433700 ), + .UNSPECIFIED. ) ; +#1670 = DIRECTION ( 'NONE', ( -2.602085213965211100E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1671 = CARTESIAN_POINT ( 'NONE', ( -10.20428321074434700, -1.500000000000002700, 6.582892699379467400 ) ) ; +#1672 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -5.000000000000000900, 7.500000000000000000 ) ) ; +#1673 = CARTESIAN_POINT ( 'NONE', ( 6.341787547819807400, -0.05843129396322184500, 4.433886593402710300 ) ) ; +#1674 = EDGE_CURVE ( 'NONE', #1624, #1887, #2191, .T. ) ; +#1675 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1676 = AXIS2_PLACEMENT_3D ( 'NONE', #51, #46, #38 ) ; +#1677 = CARTESIAN_POINT ( 'NONE', ( 6.249999999999861400, -0.8236385523326865700, 3.869812314212466700 ) ) ; +#1678 = ORIENTED_EDGE ( 'NONE', *, *, #1437, .T. ) ; +#1679 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 4.659258262890690000, 8.771665475151170500 ) ) ; +#1680 = CIRCLE ( 'NONE', #2125, 1.199999999999999700 ) ; +#1681 = ORIENTED_EDGE ( 'NONE', *, *, #543, .F. ) ; +#1682 = LINE ( 'NONE', #1301, #1832 ) ; +#1683 = CARTESIAN_POINT ( 'NONE', ( 6.574736491086576400, -0.5113435167108602000, 4.985277858343169800 ) ) ; +#1684 = VERTEX_POINT ( 'NONE', #2531 ) ; +#1685 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1686 = CYLINDRICAL_SURFACE ( 'NONE', #401, 2.500000000000000400 ) ; +#1687 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1688 = ORIENTED_EDGE ( 'NONE', *, *, #192, .T. ) ; +#1689 = VECTOR ( 'NONE', #288, 1000.000000000000000 ) ; +#1690 = ORIENTED_EDGE ( 'NONE', *, *, #1476, .F. ) ; +#1691 = CARTESIAN_POINT ( 'NONE', ( -6.870409169538295800, -0.6346662111082108600, 5.406504618314711400 ) ) ; +#1692 = EDGE_CURVE ( 'NONE', #2561, #2310, #2188, .T. ) ; +#1693 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.602085213965210100E-016, 0.0000000000000000000 ) ) ; +#1694 = VERTEX_POINT ( 'NONE', #1067 ) ; +#1695 = CARTESIAN_POINT ( 'NONE', ( 6.922234615672405100, -0.4359526643485865400, 6.420747220132647600 ) ) ; +#1696 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.999999999999999100, 7.499999999999933400 ) ) ; +#1697 = CARTESIAN_POINT ( 'NONE', ( -9.795704756359207000, -1.500000000000002700, 7.038750000006800200 ) ) ; +#1698 = CARTESIAN_POINT ( 'NONE', ( -6.352871977257478000, -0.2395619474599038600, 2.821479146533271400 ) ) ; +#1699 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.9387505004003845500, 3.749999999999980000 ) ) ; +#1700 = CARTESIAN_POINT ( 'NONE', ( -8.236799153322905900, -1.197376287693691300, 0.3656547407789619300 ) ) ; +#1701 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #47, #478, #1506, #2533, #1071, #2342 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.001396311913678259300, 0.001950683328692144400, 0.002505054743706029500 ), + .UNSPECIFIED. ) ; +#1702 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.289692704310185100, 7.187500000000000000 ) ) ; +#1703 = CARTESIAN_POINT ( 'NONE', ( -8.750000000000000000, -1.500000000000002400, 3.750000000000000000 ) ) ; +#1704 = CARTESIAN_POINT ( 'NONE', ( -6.328612145939545500, -1.415493723299955600, 0.0000000000000000000 ) ) ; +#1705 = CARTESIAN_POINT ( 'NONE', ( -8.568178868412257300, -1.500000000000002400, 1.254931449856953000 ) ) ; +#1706 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.531754163448153700, 0.7499999999999974500 ) ) ; +#1707 = EDGE_CURVE ( 'NONE', #2045, #317, #2474, .T. ) ; +#1708 = PLANE ( 'NONE', #2059 ) ; +#1709 = CARTESIAN_POINT ( 'NONE', ( -6.494491005466506400, -0.1683327565410203100, 1.577743071485322000 ) ) ; +#1710 = ORIENTED_EDGE ( 'NONE', *, *, #568, .T. ) ; +#1711 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.734723475976807100E-016, 0.0000000000000000000 ) ) ; +#1712 = VECTOR ( 'NONE', #2652, 1000.000000000000000 ) ; +#1713 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #1503, #1417 ) ; +#1714 = ORIENTED_EDGE ( 'NONE', *, *, #394, .T. ) ; +#1715 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -6.500000000000000900, 7.500000000000000000 ) ) ; +#1716 = CARTESIAN_POINT ( 'NONE', ( -6.274025236268734300, -0.5291882553417328600, 4.171698203773022600 ) ) ; +#1717 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.500000000000000400, 7.500000000000000000 ) ) ; +#1718 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1719 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1720 = VERTEX_POINT ( 'NONE', #2403 ) ; +#1721 = EDGE_CURVE ( 'NONE', #1917, #1220, #2186, .T. ) ; +#1722 = FACE_OUTER_BOUND ( 'NONE', #283, .T. ) ; +#1723 = ORIENTED_EDGE ( 'NONE', *, *, #1738, .T. ) ; +#1724 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1725 = CARTESIAN_POINT ( 'NONE', ( -8.050776377321531300, -0.1424787588523693800, 1.300820900800234700 ) ) ; +#1726 = VECTOR ( 'NONE', #911, 1000.000000000000000 ) ; +#1727 = CARTESIAN_POINT ( 'NONE', ( 8.932939833528509500, -1.289692704309949500, 7.187499999999991100 ) ) ; +#1728 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999999100, -5.000000000000000900, 7.500000000000000000 ) ) ; +#1729 = VERTEX_POINT ( 'NONE', #861 ) ; +#1730 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1731 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 1.249999999999999600, 0.0000000000000000000 ) ) ; +#1732 = ORIENTED_EDGE ( 'NONE', *, *, #972, .F. ) ; +#1733 = CARTESIAN_POINT ( 'NONE', ( -6.995829951626929800, -0.02511398329009614800, 5.551054200058870500 ) ) ; +#1734 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.734723475976807600E-016, 0.0000000000000000000 ) ) ; +#1735 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1736 = ORIENTED_EDGE ( 'NONE', *, *, #2572, .F. ) ; +#1737 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #966, #1751, #897 ), + ( #866, #813, #919 ), + ( #910, #609, #902 ), + ( #886, #952, #731 ), + ( #684, #776, #774 ), + ( #767, #750, #689 ), + ( #720, #717, #653 ), + ( #703, #831, #699 ), + ( #621, #643, #600 ), + ( #637, #587, #577 ), + ( #540, #524, #487 ), + ( #620, #521, #490 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0008242104035962946500, 0.001236315605394442000, 0.001648420807192589300, 0.002472631210788884100, 0.003296841614385178600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865463500, 1.000000000000000000), + ( 1.000000000000000000, 0.7458313642435566700, 1.000000000000000000), + ( 1.000000000000000000, 0.7821085400636250700, 1.000000000000000000), + ( 1.000000000000000000, 0.8318113535495591500, 1.000000000000000000), + ( 1.000000000000000000, 0.8479078540276620000, 1.000000000000000000), + ( 1.000000000000000000, 0.8783064667575076800, 1.000000000000000000), + ( 1.000000000000000000, 0.8926433373566894400, 1.000000000000000000), + ( 1.000000000000000000, 0.9336126647198728100, 1.000000000000000000), + ( 1.000000000000000000, 0.9575908025920902800, 1.000000000000000000), + ( 1.000000000000000000, 0.9915195602577917500, 1.000000000000000000), + ( 1.000000000000000000, 1.000382643617558000, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1738 = EDGE_CURVE ( 'NONE', #1475, #673, #2219, .T. ) ; +#1739 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -1.499999999999997600, 3.750000000000000000 ) ) ; +#1740 = CARTESIAN_POINT ( 'NONE', ( 9.112446933256890700, -1.306513758956065100, 7.174181359952900300 ) ) ; +#1741 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, -0.7545963527620208600, 3.601599557741331100 ) ) ; +#1742 = EDGE_CURVE ( 'NONE', #2274, #1188, #2247, .T. ) ; +#1743 = CARTESIAN_POINT ( 'NONE', ( -6.494491005466652000, -0.1683327565410272500, 5.922256928514703300 ) ) ; +#1744 = CARTESIAN_POINT ( 'NONE', ( 8.538209097425919900, -1.289692704310184900, 7.187499999999999100 ) ) ; +#1745 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.499999999999997600, 1.248990654325015800 ) ) ; +#1746 = CARTESIAN_POINT ( 'NONE', ( -7.102796399177574200, -0.7699711246520316600, 5.637747212391351700 ) ) ; +#1747 = ADVANCED_FACE ( 'NONE', ( #2085 ), #2058, .F. ) ; +#1748 = CARTESIAN_POINT ( 'NONE', ( -7.877805360823352000, -1.254266687044464800, 6.097649049473676400 ) ) ; +#1749 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.3449276475089466100, 1.944558889147955900 ) ) ; +#1750 = CARTESIAN_POINT ( 'NONE', ( 7.015796647203801600, -0.7173511418789830800, 1.942641010915199500 ) ) ; +#1751 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000900, -0.3249748766718785200, 6.232584971874745200 ) ) ; +#1752 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1753 = VERTEX_POINT ( 'NONE', #2192 ) ; +#1754 = CARTESIAN_POINT ( 'NONE', ( -7.011836910196169700, -0.4955379215854485700, 6.501494703318478200 ) ) ; +#1755 = LINE ( 'NONE', #632, #628 ) ; +#1756 = ORIENTED_EDGE ( 'NONE', *, *, #2626, .F. ) ; +#1757 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #425, #2327, ( #301 ) ) ; +#1758 = LINE ( 'NONE', #497, #1689 ) ; +#1759 = CARTESIAN_POINT ( 'NONE', ( 8.945129561166748300, -1.499999999999997600, 1.248990654325015800 ) ) ; +#1760 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -2.500000000000003100, 2.500000000000000000 ) ) ; +#1761 = CARTESIAN_POINT ( 'NONE', ( 6.333307644926444300, -0.2768100308281900000, 2.916761599293800500 ) ) ; +#1762 = VERTEX_POINT ( 'NONE', #1978 ) ; +#1763 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2131, #2289, #2297, #2104, #2096, #2078, #2071, #2067 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0004341254789723392200, 0.0008682509579446784300, 0.001736501915889357700 ), + .UNSPECIFIED. ) ; +#1764 = CARTESIAN_POINT ( 'NONE', ( -7.311155539930712000, -0.07826340576595687500, 5.823238669132839700 ) ) ; +#1765 = FACE_BOUND ( 'NONE', #825, .T. ) ; +#1766 = CARTESIAN_POINT ( 'NONE', ( 9.138351761592639700, -1.499999999999997800, 1.273202084661211300 ) ) ; +#1767 = CARTESIAN_POINT ( 'NONE', ( -6.250075410712298700, -0.9576952670919186600, 3.769417720636575100 ) ) ; +#1768 = ORIENTED_EDGE ( 'NONE', *, *, #2069, .T. ) ; +#1769 = FACE_OUTER_BOUND ( 'NONE', #360, .T. ) ; +#1770 = ORIENTED_EDGE ( 'NONE', *, *, #1971, .F. ) ; +#1771 = ORIENTED_EDGE ( 'NONE', *, *, #1783, .T. ) ; +#1772 = CARTESIAN_POINT ( 'NONE', ( 9.427914811167896800, -1.499999999999997100, 1.312737073983685900 ) ) ; +#1773 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -1.499999999999998200, 3.750000000000000000 ) ) ; +#1774 = CARTESIAN_POINT ( 'NONE', ( -6.773355676992391500, -0.3374639131592739300, 6.269120817544389500 ) ) ; +#1775 = DIRECTION ( 'NONE', ( 1.734723475976807600E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1776 = CARTESIAN_POINT ( 'NONE', ( -5.889015980533137000, -0.03349489806830484300, 2.926963020604666200 ) ) ; +#1777 = EDGE_CURVE ( 'NONE', #2117, #1128, #2121, .T. ) ; +#1778 = CARTESIAN_POINT ( 'NONE', ( 9.524441295965321100, -1.499999999999997300, 1.325858692667299100 ) ) ; +#1779 = AXIS2_PLACEMENT_3D ( 'NONE', #2450, #2361, #2349 ) ; +#1780 = CARTESIAN_POINT ( 'NONE', ( -7.226862179744760100, -0.8487621348752394400, 5.738831477816677100 ) ) ; +#1781 = CARTESIAN_POINT ( 'NONE', ( 9.719035299133194500, -1.499999999999997300, 1.336119972816855800 ) ) ; +#1782 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 3.556183125752455300E-015, 1.000000000000000000 ) ) ; +#1783 = EDGE_CURVE ( 'NONE', #1795, #1050, #2114, .T. ) ; +#1784 = CARTESIAN_POINT ( 'NONE', ( -7.485152036820706700, -0.1071147135071603300, 5.937400889892322700 ) ) ; +#1785 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1786 = CARTESIAN_POINT ( 'NONE', ( 6.312798085748557500, -0.3368589240223930900, 3.036175783418683300 ) ) ; +#1787 = CARTESIAN_POINT ( 'NONE', ( 9.818472803532463500, -1.499999999999997600, 1.333338821807509500 ) ) ; +#1788 = ORIENTED_EDGE ( 'NONE', *, *, #110, .F. ) ; +#1789 = CARTESIAN_POINT ( 'NONE', ( -6.461607799077094100, -0.4915005098309863100, 4.769985724803291300 ) ) ; +#1790 = CARTESIAN_POINT ( 'NONE', ( -6.922234615672454800, -0.4359526643485603900, 6.420747220132609500 ) ) ; +#1791 = CARTESIAN_POINT ( 'NONE', ( 9.959741346695485800, -1.499999999999997100, 1.295610775332269400 ) ) ; +#1792 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1793 = ORIENTED_EDGE ( 'NONE', *, *, #2486, .F. ) ; +#1794 = EDGE_CURVE ( 'NONE', #1729, #2075, #2157, .T. ) ; +#1795 = VERTEX_POINT ( 'NONE', #2574 ) ; +#1796 = CARTESIAN_POINT ( 'NONE', ( 10.00472517856309700, -1.499999999999996400, 1.277667866029393600 ) ) ; +#1797 = LINE ( 'NONE', #503, #1726 ) ; +#1798 = ORIENTED_EDGE ( 'NONE', *, *, #338, .T. ) ; +#1799 = CARTESIAN_POINT ( 'NONE', ( 10.08823165211497200, -1.499999999999997800, 1.225313980050135400 ) ) ; +#1800 = FACE_OUTER_BOUND ( 'NONE', #605, .T. ) ; +#1801 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -6.500000000000001800, 7.500000000000000000 ) ) ; +#1802 = VERTEX_POINT ( 'NONE', #1553 ) ; +#1803 = CARTESIAN_POINT ( 'NONE', ( -7.491736956767766700, -1.017556497632658100, 5.916142557793072000 ) ) ; +#1804 = CARTESIAN_POINT ( 'NONE', ( 10.12484963803511200, -1.499999999999996700, 1.191512292092231400 ) ) ; +#1805 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 3.469446951953613400E-015, 1.000000000000000000 ) ) ; +#1806 = ORIENTED_EDGE ( 'NONE', *, *, #1047, .F. ) ; +#1807 = CARTESIAN_POINT ( 'NONE', ( 10.17941553452147700, -1.499999999999997100, 1.110708606592496300 ) ) ; +#1808 = CARTESIAN_POINT ( 'NONE', ( 10.19703311092948700, -1.499999999999996900, 1.063594524487132300 ) ) ; +#1809 = CARTESIAN_POINT ( 'NONE', ( -10.16328963370937900, -1.500000000000002700, 0.7754015061898489300 ) ) ; +#1810 = EDGE_CURVE ( 'NONE', #2117, #2463, #2051, .T. ) ; +#1811 = CARTESIAN_POINT ( 'NONE', ( -7.852772961680640800, -0.1413851701227376300, 6.128384290737424000 ) ) ; +#1812 = CARTESIAN_POINT ( 'NONE', ( 10.20929721291183300, -1.499999999999997100, 0.9668854995134982300 ) ) ; +#1813 = CARTESIAN_POINT ( 'NONE', ( -6.876546911529640500, -0.4051536019662023100, 6.374068720136204300 ) ) ; +#1814 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.500000000000002400, 1.248990654325014400 ) ) ; +#1815 = CARTESIAN_POINT ( 'NONE', ( 10.20428321074434800, -1.499999999999996900, 0.9171073006205332500 ) ) ; +#1816 = CARTESIAN_POINT ( 'NONE', ( -9.138351761590158200, -1.500000000000002900, 1.273202084660848100 ) ) ; +#1817 = AXIS2_PLACEMENT_3D ( 'NONE', #663, #659, #650 ) ; +#1818 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999999100, 4.156751133619649400, 1.852952387243705500 ) ) ; +#1819 = CARTESIAN_POINT ( 'NONE', ( 10.16328963370335400, -1.499999999999997300, 0.7754015061787639100 ) ) ; +#1820 = ORIENTED_EDGE ( 'NONE', *, *, #1635, .F. ) ; +#1821 = ADVANCED_FACE ( 'NONE', ( #2023 ), #1987, .T. ) ; +#1822 = CIRCLE ( 'NONE', #1544, 1.199999999999999700 ) ; +#1823 = CARTESIAN_POINT ( 'NONE', ( 10.10412793376718300, -1.499999999999996900, 0.6937609520543215300 ) ) ; +#1824 = DIRECTION ( 'NONE', ( 1.734723475976807100E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1825 = ORIENTED_EDGE ( 'NONE', *, *, #32, .T. ) ; +#1826 = DIRECTION ( 'NONE', ( -3.469446951953614700E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1827 = ORIENTED_EDGE ( 'NONE', *, *, #1437, .F. ) ; +#1828 = EDGE_CURVE ( 'NONE', #2561, #1362, #1995, .T. ) ; +#1829 = AXIS2_PLACEMENT_3D ( 'NONE', #616, #606, #599 ) ; +#1830 = FACE_OUTER_BOUND ( 'NONE', #901, .T. ) ; +#1831 = CARTESIAN_POINT ( 'NONE', ( -7.303800926511158300, -0.6891037472305312500, 0.7699588442925009400 ) ) ; +#1832 = VECTOR ( 'NONE', #1735, 1000.000000000000000 ) ; +#1833 = ORIENTED_EDGE ( 'NONE', *, *, #2196, .T. ) ; +#1834 = ORIENTED_EDGE ( 'NONE', *, *, #873, .T. ) ; +#1835 = CARTESIAN_POINT ( 'NONE', ( -6.749999999999981300, -0.3249748766718616500, 1.267415028125280500 ) ) ; +#1836 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -2.500000000000001300, 4.999999999999999100 ) ) ; +#1837 = CARTESIAN_POINT ( 'NONE', ( -7.240084348142578300, -0.6469456262863098100, 6.686713833282015100 ) ) ; +#1838 = VERTEX_POINT ( 'NONE', #1169 ) ; +#1839 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1840 = ADVANCED_FACE ( 'NONE', ( #1958 ), #1922, .T. ) ; +#1841 = CARTESIAN_POINT ( 'NONE', ( 9.795704756359208800, -1.499999999999997300, 0.4612499999932023200 ) ) ; +#1842 = CARTESIAN_POINT ( 'NONE', ( 8.236799153322936100, -1.197376287693690200, 7.134345259221037200 ) ) ; +#1843 = EDGE_CURVE ( 'NONE', #2589, #1024, #1909, .T. ) ; +#1844 = CARTESIAN_POINT ( 'NONE', ( -7.632064662265374700, -1.107514553127414000, 5.991712839626075900 ) ) ; +#1845 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999999100, -0.05669603477447826600, 4.397536507727648000 ) ) ; +#1846 = AXIS2_PLACEMENT_3D ( 'NONE', #722, #719, #715 ) ; +#1847 = CARTESIAN_POINT ( 'NONE', ( 9.881602733520640700, -1.499999999999997100, 0.5053083314572347500 ) ) ; +#1848 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1849 = CARTESIAN_POINT ( 'NONE', ( 10.19066261346733300, -1.747974708760576600, 0.6002765476275963000 ) ) ; +#1850 = CARTESIAN_POINT ( 'NONE', ( 7.015611442479238800, -0.7172375045536395500, 5.557190781734798100 ) ) ; +#1851 = ORIENTED_EDGE ( 'NONE', *, *, #1392, .T. ) ; +#1852 = VECTOR ( 'NONE', #1661, 1000.000000000000000 ) ; +#1853 = ORIENTED_EDGE ( 'NONE', *, *, #1873, .F. ) ; +#1854 = CARTESIAN_POINT ( 'NONE', ( 9.964272585331944000, -1.499999999999997100, 0.5596607664146232600 ) ) ; +#1855 = CARTESIAN_POINT ( 'NONE', ( 9.464597736616848800, -1.375402298158984000, 7.123080746648875900 ) ) ; +#1856 = VERTEX_POINT ( 'NONE', #1156 ) ; +#1857 = LINE ( 'NONE', #2263, #1852 ) ; +#1858 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000900, -0.6907751467797221800, 3.626238110275474800 ) ) ; +#1859 = ORIENTED_EDGE ( 'NONE', *, *, #1828, .T. ) ; +#1860 = CARTESIAN_POINT ( 'NONE', ( -8.050776377321378500, -0.1424787588519121100, 6.199179099199770200 ) ) ; +#1861 = ORIENTED_EDGE ( 'NONE', *, *, #2135, .F. ) ; +#1862 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -5.000000000000000900, 6.316524975874009400 ) ) ; +#1863 = ORIENTED_EDGE ( 'NONE', *, *, #2540, .T. ) ; +#1864 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -6.501000000000001200, 3.750000000000000000 ) ) ; +#1865 = AXIS2_PLACEMENT_3D ( 'NONE', #906, #864, #924 ) ; +#1866 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.289692704310191100, 0.3124999999999967800 ) ) ; +#1867 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.1100301479937776200, 1.020898033750352600 ) ) ; +#1868 = CARTESIAN_POINT ( 'NONE', ( -7.408477594459169400, -0.7593931866159587800, 6.800069265759408800 ) ) ; +#1869 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1870 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2133, #1741, #2166, #687, #1698, #462, #28, #228, #651, #1914 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( -1.337772444813708800E-005, 0.0006961422858948868300, 0.001405662296237910700, 0.002115182306580934400, 0.002824702316923958500 ), + .UNSPECIFIED. ) ; +#1871 = CARTESIAN_POINT ( 'NONE', ( 9.637118122915149200, -1.428048074929104700, 7.084799232045375200 ) ) ; +#1872 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1873 = EDGE_CURVE ( 'NONE', #2083, #2045, #1123, .T. ) ; +#1874 = CARTESIAN_POINT ( 'NONE', ( -7.850815382295770000, -1.235850611471793100, 6.084037487265182300 ) ) ; +#1875 = AXIS2_PLACEMENT_3D ( 'NONE', #836, #822, #818 ) ; +#1876 = CARTESIAN_POINT ( 'NONE', ( -6.876649093227510600, -0.4052183431612613700, 1.125817037252547600 ) ) ; +#1877 = AXIS2_PLACEMENT_3D ( 'NONE', #755, #748, #744 ) ; +#1878 = CARTESIAN_POINT ( 'NONE', ( 9.795704756372451500, -1.499999999999997300, 7.038750000000003800 ) ) ; +#1879 = CARTESIAN_POINT ( 'NONE', ( -7.012055074363525300, -0.4956840045902455300, 0.9982992877138116000 ) ) ; +#1880 = CARTESIAN_POINT ( 'NONE', ( 6.249019673119443400, -0.8230389033601358500, 3.866502679993236000 ) ) ; +#1881 = ORIENTED_EDGE ( 'NONE', *, *, #223, .F. ) ; +#1882 = CARTESIAN_POINT ( 'NONE', ( -8.325493963817582000, -0.09681856550542626600, 6.266906196656161200 ) ) ; +#1883 = VECTOR ( 'NONE', #252, 1000.000000000000000 ) ; +#1884 = ORIENTED_EDGE ( 'NONE', *, *, #1121, .F. ) ; +#1885 = VECTOR ( 'NONE', #792, 1000.000000000000000 ) ; +#1886 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.734723475976807300E-016, 0.0000000000000000000 ) ) ; +#1887 = VERTEX_POINT ( 'NONE', #542 ) ; +#1888 = LINE ( 'NONE', #1399, #1885 ) ; +#1889 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.289692704310191100, 0.3124999999999967800 ) ) ; +#1890 = ORIENTED_EDGE ( 'NONE', *, *, #89, .F. ) ; +#1891 = CARTESIAN_POINT ( 'NONE', ( -7.457753385686013200, -0.7907181908417527700, 0.6711215288093551600 ) ) ; +#1892 = CARTESIAN_POINT ( 'NONE', ( 5.921834734243337700, -0.01569965501628411300, 4.695154511004839800 ) ) ; +#1893 = FACE_OUTER_BOUND ( 'NONE', #541, .T. ) ; +#1894 = VERTEX_POINT ( 'NONE', #949 ) ; +#1895 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1896 = ORIENTED_EDGE ( 'NONE', *, *, #1794, .T. ) ; +#1897 = CARTESIAN_POINT ( 'NONE', ( 1.127570259384925200E-015, -6.500000000000002700, 7.500000000000000000 ) ) ; +#1898 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -6.500000000000000900, 0.0000000000000000000 ) ) ; +#1899 = CARTESIAN_POINT ( 'NONE', ( 6.750000000000000900, -2.500000000000001800, 2.500000000000000400 ) ) ; +#1900 = CARTESIAN_POINT ( 'NONE', ( 6.658267548863059400, 0.01411132347713244000, 5.125103120104201400 ) ) ; +#1901 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1866, #1944, #1904, #1918, #1660, #1891, #1831, #1879, #1876, #1835 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0006234381898878280400, 0.001246876379775656100, 0.001870314569663483800, 0.002493752759551311700 ), + .UNSPECIFIED. ) ; +#1902 = CARTESIAN_POINT ( 'NONE', ( -7.670978458884563100, -0.9198132667363944100, 6.938556227737624500 ) ) ; +#1903 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -2.500000000000001300, 7.500000000000000000 ) ) ; +#1904 = CARTESIAN_POINT ( 'NONE', ( -8.335590153177657100, -1.237034755382087300, 0.3405519076604415800 ) ) ; +#1905 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999996400, 0.2487358244187993000, 1.163686867299669900 ) ) ; +#1906 = PLANE ( 'NONE', #2482 ) ; +#1907 = CARTESIAN_POINT ( 'NONE', ( 7.226862179744729000, -0.8487621348752690800, 5.738831477816658500 ) ) ; +#1908 = EDGE_CURVE ( 'NONE', #1209, #673, #1991, .T. ) ; +#1909 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2229, #970, #1816, #352, #1608, #138, #1378, #2612, #1164, #2428, #959, #2224, #751, #2012, #551, #1809, #345, #1591, #131, #1371 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0005835726724159169800, 0.0008753590086238754100, 0.001167145344831834000, 0.001313038512935815900, 0.001458931681039797600, 0.001604824849143779500, 0.001750718017247761400, 0.002042504353455725300, 0.002334290689663689200 ), + .UNSPECIFIED. ) ; +#1910 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.1100301479937532300, 6.479101966249690000 ) ) ; +#1911 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #420 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #2442, #2421, #2412 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#1912 = CARTESIAN_POINT ( 'NONE', ( -6.631846994859613700, -2.235799206755650900, 7.500000000000002700 ) ) ; +#1913 = ORIENTED_EDGE ( 'NONE', *, *, #1237, .F. ) ; +#1914 = CARTESIAN_POINT ( 'NONE', ( -6.749999999999981300, -0.3249748766718616500, 1.267415028125280500 ) ) ; +#1915 = AXIS2_PLACEMENT_3D ( 'NONE', #947, #942, #940 ) ; +#1916 = LINE ( 'NONE', #706, #1349 ) ; +#1917 = VERTEX_POINT ( 'NONE', #335 ) ; +#1918 = CARTESIAN_POINT ( 'NONE', ( -7.955776129797382800, -1.083230067977067900, 0.4381900591137220500 ) ) ; +#1919 = VECTOR ( 'NONE', #1582, 1000.000000000000000 ) ; +#1920 = CARTESIAN_POINT ( 'NONE', ( -8.322332627675161000, -1.457901027929045400, 1.285436490488149700 ) ) ; +#1921 = ORIENTED_EDGE ( 'NONE', *, *, #1013, .T. ) ; +#1922 = CYLINDRICAL_SURFACE ( 'NONE', #614, 2.500000000000000000 ) ; +#1923 = CARTESIAN_POINT ( 'NONE', ( 8.659229808472559900, -1.499999999999997600, 6.251009345674983600 ) ) ; +#1924 = CARTESIAN_POINT ( 'NONE', ( -6.511911571493081800, -1.968759057817340800, -0.0000000000000000000 ) ) ; +#1925 = ORIENTED_EDGE ( 'NONE', *, *, #899, .F. ) ; +#1926 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1927 = CIRCLE ( 'NONE', #566, 2.291287847477919000 ) ; +#1928 = CARTESIAN_POINT ( 'NONE', ( 6.639404172397192400, -0.1639620307254666400, 1.630192748215133900 ) ) ; +#1929 = ORIENTED_EDGE ( 'NONE', *, *, #2507, .F. ) ; +#1930 = EDGE_CURVE ( 'NONE', #2274, #385, #2020, .T. ) ; +#1931 = VERTEX_POINT ( 'NONE', #1620 ) ; +#1932 = ORIENTED_EDGE ( 'NONE', *, *, #810, .F. ) ; +#1933 = CARTESIAN_POINT ( 'NONE', ( -6.870409169538184800, -0.6346662111082513900, 2.093495381685404500 ) ) ; +#1934 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000900, -5.000000000000000900, 6.316524975874009400 ) ) ; +#1935 = CARTESIAN_POINT ( 'NONE', ( 11.04128784747791800, -1.499999999999996900, 7.500000000000000000 ) ) ; +#1936 = CARTESIAN_POINT ( 'NONE', ( -6.352867507378965300, -0.2395702669571463100, 4.678498425460796600 ) ) ; +#1937 = CARTESIAN_POINT ( 'NONE', ( -8.476934860899485000, -1.500000000000002400, 1.264957660359078000 ) ) ; +#1938 = CARTESIAN_POINT ( 'NONE', ( 1.127570259384925200E-015, -6.500000000000002700, 7.500000000000000000 ) ) ; +#1939 = CARTESIAN_POINT ( 'NONE', ( -7.670978458884488500, -0.9198132667363344600, 0.5614437722624260300 ) ) ; +#1940 = CARTESIAN_POINT ( 'NONE', ( 6.258838410278591400, -0.7251466147065418500, 3.492783470692443900 ) ) ; +#1941 = CARTESIAN_POINT ( 'NONE', ( 6.505213034913036500E-016, -2.500000000000003600, 2.500000000000000400 ) ) ; +#1942 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -6.500000000000000900, 0.0000000000000000000 ) ) ; +#1943 = EDGE_CURVE ( 'NONE', #2334, #1729, #1888, .T. ) ; +#1944 = CARTESIAN_POINT ( 'NONE', ( -8.538209097425918200, -1.289692704310190900, 0.3124999999999969500 ) ) ; +#1945 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.602085213965211100E-016, 0.0000000000000000000 ) ) ; +#1946 = AXIS2_PLACEMENT_3D ( 'NONE', #2629, #2649, #1175 ) ; +#1947 = ORIENTED_EDGE ( 'NONE', *, *, #1121, .T. ) ; +#1948 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -1.499999999999997800, 3.750000000000000000 ) ) ; +#1949 = VECTOR ( 'NONE', #890, 1000.000000000000000 ) ; +#1950 = CARTESIAN_POINT ( 'NONE', ( -7.925430843468353400, -1.277685765625603800, 6.111477854514920900 ) ) ; +#1951 = CARTESIAN_POINT ( 'NONE', ( -8.476934860897740600, -1.500000000000002400, 6.235042339640729700 ) ) ; +#1952 = VERTEX_POINT ( 'NONE', #2007 ) ; +#1953 = AXIS2_PLACEMENT_3D ( 'NONE', #1374, #1054, #1086 ) ; +#1954 = FACE_OUTER_BOUND ( 'NONE', #847, .T. ) ; +#1955 = ADVANCED_FACE ( 'NONE', ( #1954 ), #171, .T. ) ; +#1956 = ORIENTED_EDGE ( 'NONE', *, *, #2238, .F. ) ; +#1957 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.289692704310185100, 7.187500000000000000 ) ) ; +#1958 = FACE_OUTER_BOUND ( 'NONE', #353, .T. ) ; +#1959 = CARTESIAN_POINT ( 'NONE', ( 9.659685017421345800, -1.811559494638857300, 1.419609920496290000 ) ) ; +#1960 = ORIENTED_EDGE ( 'NONE', *, *, #1783, .F. ) ; +#1961 = ADVANCED_FACE ( 'NONE', ( #1893 ), #2082, .T. ) ; +#1962 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000001800, 0.02515241365658782400, 2.051494732895204000 ) ) ; +#1963 = ORIENTED_EDGE ( 'NONE', *, *, #2260, .F. ) ; +#1964 = ORIENTED_EDGE ( 'NONE', *, *, #409, .F. ) ; +#1965 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #594, #574, #569 ), + ( #567, #560, #558 ), + ( #554, #550, #548 ), + ( #544, #537, #534 ), + ( #532, #529, #511 ), + ( #508, #504, #502 ), + ( #498, #496, #480 ), + ( #477, #472, #464 ), + ( #461, #450, #439 ), + ( #435, #416, #412 ), + ( #410, #407, #403 ), + ( #400, #378, #376 ), + ( #371, #369, #349 ), + ( #346, #344, #340 ), + ( #333, #328, #322 ), + ( #319, #314, #307 ), + ( #305, #303, #302 ), + ( #298, #291, #274 ), + ( #270, #265, #262 ), + ( #256, #240, #230 ), + ( #226, #225, #212 ), + ( #208, #204, #202 ), + ( #200, #197, #180 ), + ( #172, #167, #166 ), + ( #153, #146, #143 ), + ( #136, #134, #129 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -2.710505431213761100E-020, 0.0003117651199006306400, 0.0006235302398012612700, 0.0009352953597018919100, 0.001247060479602522500, 0.001870590719403783800, 0.002494120959205045100, 0.003117651199006306200, 0.003429416318906936700, 0.003741181438807567600, 0.004052946558708198600, 0.004364711678608829100, 0.004988241918410090200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.2499999999999995600, 1.000000000000000000), + ( 1.000000000000000000, 0.2499760950583633200, 1.000000000000000000), + ( 1.000000000000000000, 0.2545484055413359500, 1.000000000000000000), + ( 1.000000000000000000, 0.2704677616995497800, 1.000000000000000000), + ( 1.000000000000000000, 0.2817695917743327500, 1.000000000000000000), + ( 1.000000000000000000, 0.3084315763333581000, 1.000000000000000000), + ( 1.000000000000000000, 0.3236487628465663000, 1.000000000000000000), + ( 1.000000000000000000, 0.3554114645798920300, 1.000000000000000000), + ( 1.000000000000000000, 0.3720577744228665300, 1.000000000000000000), + ( 1.000000000000000000, 0.4228250297223821700, 1.000000000000000000), + ( 1.000000000000000000, 0.4580224156112402400, 1.000000000000000000), + ( 1.000000000000000000, 0.5253830961241239300, 1.000000000000000000), + ( 1.000000000000000000, 0.5575090605478058000, 1.000000000000000000), + ( 1.000000000000000000, 0.6166529525240341800, 1.000000000000000000), + ( 1.000000000000000000, 0.6439460129195155900, 1.000000000000000000), + ( 1.000000000000000000, 0.6772031439453760600, 1.000000000000000000), + ( 1.000000000000000000, 0.6870934825342821500, 1.000000000000000000), + ( 1.000000000000000000, 0.7041608022265130100, 1.000000000000000000), + ( 1.000000000000000000, 0.7112385613049805300, 1.000000000000000000), + ( 1.000000000000000000, 0.7219798917371982300, 1.000000000000000000), + ( 1.000000000000000000, 0.7257212178203639200, 1.000000000000000000), + ( 1.000000000000000000, 0.7298933834737334500, 1.000000000000000000), + ( 1.000000000000000000, 0.7302798788495327200, 1.000000000000000000), + ( 1.000000000000000000, 0.7266576654487334500, 1.000000000000000000), + ( 1.000000000000000000, 0.7178969860314770000, 1.000000000000000000), + ( 1.000000000000000000, 0.7053563207170372400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1966 = CARTESIAN_POINT ( 'NONE', ( -8.418967747198133000, -0.07061636851190071500, 6.283035874707237200 ) ) ; +#1967 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.741936567896977200, 2.500000000000000000 ) ) ; +#1968 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1969 = ORIENTED_EDGE ( 'NONE', *, *, #1159, .F. ) ; +#1970 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#1971 = EDGE_CURVE ( 'NONE', #2266, #1663, #1857, .T. ) ; +#1972 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1973 = CARTESIAN_POINT ( 'NONE', ( -7.126816450401818800, -0.7858356468882508100, 5.657055605855606300 ) ) ; +#1974 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.05672885952160079000, 3.102506146842661100 ) ) ; +#1975 = CARTESIAN_POINT ( 'NONE', ( -7.760517011741819200, -0.9721072046138875500, 6.979716786744646100 ) ) ; +#1976 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -2.500000000000003100, 0.0000000000000000000 ) ) ; +#1977 = CARTESIAN_POINT ( 'NONE', ( -6.234037820248366800, -0.4181579352452338700, 3.904647722352165800 ) ) ; +#1978 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -1.499999999999997800, 4.950000000000000200 ) ) ; +#1979 = CARTESIAN_POINT ( 'NONE', ( -8.079200516305043300, -1.356532417238669000, 6.159672177691871500 ) ) ; +#1980 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1981 = CARTESIAN_POINT ( 'NONE', ( -6.365846649954235700, -0.5267959145697644900, 2.992975347662703500 ) ) ; +#1982 = EDGE_CURVE ( 'NONE', #1624, #1024, #1927, .T. ) ; +#1983 = VERTEX_POINT ( 'NONE', #2485 ) ; +#1984 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1985 = VECTOR ( 'NONE', #808, 1000.000000000000000 ) ; +#1986 = VERTEX_POINT ( 'NONE', #1223 ) ; +#1987 = CYLINDRICAL_SURFACE ( 'NONE', #618, 2.500000000000000400 ) ; +#1988 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -5.000000000000000900, 6.316524975874009400 ) ) ; +#1989 = ORIENTED_EDGE ( 'NONE', *, *, #2596, .F. ) ; +#1990 = CARTESIAN_POINT ( 'NONE', ( 9.724914359541209300, -1.879060172822365700, 1.447210965290131500 ) ) ; +#1991 = LINE ( 'NONE', #1801, #1919 ) ; +#1992 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1993 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -2.500000000000001300, 2.500000000000000400 ) ) ; +#1994 = ORIENTED_EDGE ( 'NONE', *, *, #229, .F. ) ; +#1995 = LINE ( 'NONE', #364, #2055 ) ; +#1996 = ORIENTED_EDGE ( 'NONE', *, *, #338, .F. ) ; +#1997 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1998 = ORIENTED_EDGE ( 'NONE', *, *, #565, .F. ) ; +#1999 = CARTESIAN_POINT ( 'NONE', ( -6.192578998272278300, -0.03011826609221608700, 2.097891402488025300 ) ) ; +#2000 = EDGE_CURVE ( 'NONE', #2310, #317, #727, .T. ) ; +#2001 = CARTESIAN_POINT ( 'NONE', ( -8.591829814332291100, 0.005184324483575747700, 6.301809644890179900 ) ) ; +#2002 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -2.500000000000001300, 4.999999999999999100 ) ) ; +#2003 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, 0.0000000000000000000, 4.999999999999999100 ) ) ; +#2004 = ADVANCED_FACE ( 'NONE', ( #1830 ), #539, .T. ) ; +#2005 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2006 = AXIS2_PLACEMENT_3D ( 'NONE', #2132, #56, #2658 ) ; +#2007 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.289692704310186200, 0.3124999999999990000 ) ) ; +#2008 = CARTESIAN_POINT ( 'NONE', ( -7.945040619986255800, -1.070665523966452200, 7.052008261565543300 ) ) ; +#2009 = CARTESIAN_POINT ( 'NONE', ( 6.750000000000000900, -2.500000000000001800, 4.999999999999999100 ) ) ; +#2010 = ADVANCED_FACE ( 'NONE', ( #1765, #1800 ), #2383, .F. ) ; +#2011 = VERTEX_POINT ( 'NONE', #1109 ) ; +#2012 = CARTESIAN_POINT ( 'NONE', ( -10.20929721291203200, -1.500000000000002400, 0.9668854995242838200 ) ) ; +#2013 = CARTESIAN_POINT ( 'NONE', ( -8.158831423890726200, -1.393764822383541700, 6.180533354716518000 ) ) ; +#2014 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2015 = ORIENTED_EDGE ( 'NONE', *, *, #2366, .F. ) ; +#2016 = EDGE_CURVE ( 'NONE', #1856, #1684, #1797, .T. ) ; +#2017 = FACE_OUTER_BOUND ( 'NONE', #996, .T. ) ; +#2018 = AXIS2_PLACEMENT_3D ( 'NONE', #1538, #1551, #1496 ) ; +#2019 = ORIENTED_EDGE ( 'NONE', *, *, #1843, .F. ) ; +#2020 = CIRCLE ( 'NONE', #645, 2.500000000000000000 ) ; +#2021 = ORIENTED_EDGE ( 'NONE', *, *, #192, .F. ) ; +#2022 = AXIS2_PLACEMENT_3D ( 'NONE', #883, #874, #871 ) ; +#2023 = FACE_OUTER_BOUND ( 'NONE', #290, .T. ) ; +#2024 = CARTESIAN_POINT ( 'NONE', ( -8.659229808471987900, -1.500000000000002400, 6.251009345674985300 ) ) ; +#2025 = ORIENTED_EDGE ( 'NONE', *, *, #2292, .T. ) ; +#2026 = CARTESIAN_POINT ( 'NONE', ( 10.09488151129774500, -1.665166312162759800, 0.5604211443006923400 ) ) ; +#2027 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2028 = ADVANCED_FACE ( 'NONE', ( #1722 ), #1686, .T. ) ; +#2029 = ORIENTED_EDGE ( 'NONE', *, *, #1014, .F. ) ; +#2030 = ORIENTED_EDGE ( 'NONE', *, *, #177, .T. ) ; +#2031 = CARTESIAN_POINT ( 'NONE', ( 9.724914359541209300, -1.879060172822366400, 6.052789034709867600 ) ) ; +#2032 = DIRECTION ( 'NONE', ( -2.602085213965211100E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2033 = CARTESIAN_POINT ( 'NONE', ( -8.669059211424773500, 0.05745521994377629500, 6.302836035459803200 ) ) ; +#2034 = CARTESIAN_POINT ( 'NONE', ( -6.750000000000001800, -2.500000000000003100, 2.500000000000000000 ) ) ; +#2035 = CARTESIAN_POINT ( 'NONE', ( 11.03959828868357600, -0.1521428184593960100, 5.624203150946664600 ) ) ; +#2036 = AXIS2_PLACEMENT_3D ( 'NONE', #1618, #155, #1396 ) ; +#2037 = ADVANCED_FACE ( 'NONE', ( #1769 ), #1657, .T. ) ; +#2038 = CARTESIAN_POINT ( 'NONE', ( 10.19066261346733300, -1.747974708760575300, 6.899723452372402500 ) ) ; +#2039 = CARTESIAN_POINT ( 'NONE', ( 8.325493963817793400, -0.09681856550548993700, 6.266906196656306900 ) ) ; +#2040 = CARTESIAN_POINT ( 'NONE', ( 10.80572585913423800, -0.03930084807372142400, 1.743108591944033700 ) ) ; +#2041 = DIRECTION ( 'NONE', ( 1.734723475976807100E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2042 = VECTOR ( 'NONE', #1468, 1000.000000000000000 ) ; +#2043 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1878, #1871, #1855, #1740, #1727, #1702 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.001396311913678263200, 0.001950683328692149200, 0.002505054743706035200 ), + .UNSPECIFIED. ) ; +#2044 = CARTESIAN_POINT ( 'NONE', ( 9.659685017421185900, -1.811559494638933500, 6.080390079503774600 ) ) ; +#2045 = VERTEX_POINT ( 'NONE', #1951 ) ; +#2046 = LINE ( 'NONE', #762, #312 ) ; +#2047 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#2048 = CARTESIAN_POINT ( 'NONE', ( 8.322332627675194800, -1.457901027929017000, 6.214563509511854100 ) ) ; +#2049 = ORIENTED_EDGE ( 'NONE', *, *, #1019, .T. ) ; +#2050 = CARTESIAN_POINT ( 'NONE', ( -8.040597708556250100, -1.117206025197055900, 7.083300037121549800 ) ) ; +#2051 = CIRCLE ( 'NONE', #656, 2.500000000000000400 ) ; +#2052 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2053 = ORIENTED_EDGE ( 'NONE', *, *, #982, .T. ) ; +#2054 = EDGE_CURVE ( 'NONE', #385, #2606, #2275, .T. ) ; +#2055 = VECTOR ( 'NONE', #1824, 1000.000000000000000 ) ; +#2056 = CARTESIAN_POINT ( 'NONE', ( 10.80572585913438200, -0.03930084807530536500, 5.756891408056056000 ) ) ; +#2057 = ORIENTED_EDGE ( 'NONE', *, *, #2653, .F. ) ; +#2058 = CYLINDRICAL_SURFACE ( 'NONE', #683, 1.200000000000000600 ) ; +#2059 = AXIS2_PLACEMENT_3D ( 'NONE', #1625, #1563, #1557 ) ; +#2060 = ORIENTED_EDGE ( 'NONE', *, *, #2596, .T. ) ; +#2061 = CARTESIAN_POINT ( 'NONE', ( 10.09488151129754700, -1.665166312162879000, 6.939578855699502400 ) ) ; +#2062 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, 0.4047375096555646000, 6.250000000000000900 ) ) ; +#2063 = CARTESIAN_POINT ( 'NONE', ( -8.322332627675173500, -1.457901027929017200, 6.214563509511851400 ) ) ; +#2064 = ORIENTED_EDGE ( 'NONE', *, *, #428, .F. ) ; +#2065 = CARTESIAN_POINT ( 'NONE', ( 6.707037289822980400, -0.5536549987994061600, 5.200144187254601900 ) ) ; +#2066 = CARTESIAN_POINT ( 'NONE', ( 9.587348138839029600, -1.755572229636630100, 6.107620199241771400 ) ) ; +#2067 = CARTESIAN_POINT ( 'NONE', ( 6.750000000000000900, -2.500000000000001800, 0.0000000000000000000 ) ) ; +#2068 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000001800, -0.3536453619812065500, 3.389796878835562100 ) ) ; +#2069 = EDGE_CURVE ( 'NONE', #673, #1795, #1758, .T. ) ; +#2070 = CARTESIAN_POINT ( 'NONE', ( -8.783446460146480600, 0.1801171714058432700, 6.292905924045358600 ) ) ; +#2071 = CARTESIAN_POINT ( 'NONE', ( 6.631846994859378300, -2.235799206755753900, 2.168404344971008900E-016 ) ) ; +#2072 = CARTESIAN_POINT ( 'NONE', ( 10.58308603893083000, 0.03001104472345934900, 5.870570435504873800 ) ) ; +#2073 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.839107728028796700E-016, 0.0000000000000000000 ) ) ; +#2074 = CARTESIAN_POINT ( 'NONE', ( 6.369762118747254400, -1.555747387183595800, 7.499999999999998200 ) ) ; +#2075 = VERTEX_POINT ( 'NONE', #1942 ) ; +#2076 = ORIENTED_EDGE ( 'NONE', *, *, #1196, .F. ) ; +#2077 = LINE ( 'NONE', #1717, #1883 ) ; +#2078 = CARTESIAN_POINT ( 'NONE', ( 6.511923749374663100, -1.968789707185299800, 4.814824860968095100E-032 ) ) ; +#2079 = ORIENTED_EDGE ( 'NONE', *, *, #2431, .F. ) ; +#2080 = CARTESIAN_POINT ( 'NONE', ( -11.04128784747791800, -1.500000000000003100, 7.500000000000000000 ) ) ; +#2081 = VECTOR ( 'NONE', #517, 1000.000000000000000 ) ; +#2082 = PLANE ( 'NONE', #519 ) ; +#2083 = VERTEX_POINT ( 'NONE', #63 ) ; +#2084 = CARTESIAN_POINT ( 'NONE', ( -8.236799153322831300, -1.197376287693640900, 7.134345259221004400 ) ) ; +#2085 = FACE_OUTER_BOUND ( 'NONE', #388, .T. ) ; +#2086 = ORIENTED_EDGE ( 'NONE', *, *, #514, .T. ) ; +#2087 = AXIS2_PLACEMENT_3D ( 'NONE', #957, #342, #259 ) ; +#2088 = CARTESIAN_POINT ( 'NONE', ( 9.988393474176502800, -1.596258624409003300, 6.979059179599644800 ) ) ; +#2089 = ORIENTED_EDGE ( 'NONE', *, *, #918, .T. ) ; +#2090 = EDGE_LOOP ( 'NONE', ( #2210, #2214, #2223, #2241 ) ) ; +#2091 = CARTESIAN_POINT ( 'NONE', ( -8.405378661242874500, -1.484463526201642600, 6.227599465977113400 ) ) ; +#2092 = AXIS2_PLACEMENT_3D ( 'NONE', #1516, #1514, #1507 ) ; +#2093 = CARTESIAN_POINT ( 'NONE', ( 9.435658540727041900, -1.662628835573754400, 6.156097991066420000 ) ) ; +#2094 = CARTESIAN_POINT ( 'NONE', ( 6.232616707451144000, -0.2937195162541294500, 3.801795010273127900 ) ) ; +#2095 = CARTESIAN_POINT ( 'NONE', ( -8.813732347348810900, 0.2496837068194096600, 6.281151112195926700 ) ) ; +#2096 = CARTESIAN_POINT ( 'NONE', ( 6.369768119213781600, -1.555767187667635300, 0.0000000000000000000 ) ) ; +#2097 = CARTESIAN_POINT ( 'NONE', ( 6.393195612716065800, -0.5125597263190103700, 4.588436340477042700 ) ) ; +#2098 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2446, #2409, #2392, #2388, #2371, #2364, #2357, #2355, #2341, #2332, #2330, #2323, #2318, #2304, #2298, #2290 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0004121052017981335000, 0.0008242104035962670000, 0.001236315605394400400, 0.001648420807192534000, 0.002472631210788800800, 0.002884736412586935300, 0.003296841614385068900 ), + .UNSPECIFIED. ) ; +#2099 = EDGE_CURVE ( 'NONE', #1838, #1589, #1682, .T. ) ; +#2100 = CARTESIAN_POINT ( 'NONE', ( -8.336454393324396900, -1.230579405799717500, 7.153899204358630500 ) ) ; +#2101 = EDGE_CURVE ( 'NONE', #1220, #969, #1654, .T. ) ; +#2102 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000900, -0.6874803908596216500, 3.865303780423019000 ) ) ; +#2103 = CARTESIAN_POINT ( 'NONE', ( 10.17762824323426200, 0.1290877593505629400, 6.050055443513733700 ) ) ; +#2104 = CARTESIAN_POINT ( 'NONE', ( 6.328616167183168000, -1.415509680749530000, -0.0000000000000000000 ) ) ; +#2105 = CARTESIAN_POINT ( 'NONE', ( 9.764625079757504300, -1.481675398110290400, 7.049534839886583800 ) ) ; +#2106 = CARTESIAN_POINT ( 'NONE', ( 6.363244730678490900, -0.09709871898772230700, 5.723943263278960600 ) ) ; +#2107 = ORIENTED_EDGE ( 'NONE', *, *, #2054, .T. ) ; +#2108 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2532, #1068, #1924, #468, #1704, #268, #1523, #70 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( -1.000000000005925800E-005, 0.0008625214553591199800, 0.001298782183038709000, 0.001735042910718298300 ), + .UNSPECIFIED. ) ; +#2109 = CARTESIAN_POINT ( 'NONE', ( -8.750000000000000000, -6.501000000000001200, 2.550000000000000300 ) ) ; +#2110 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2111 = CYLINDRICAL_SURFACE ( 'NONE', #1953, 2.500000000000000000 ) ; +#2112 = VERTEX_POINT ( 'NONE', #672 ) ; +#2113 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2114 = CIRCLE ( 'NONE', #692, 2.500000000000000000 ) ; +#2115 = ORIENTED_EDGE ( 'NONE', *, *, #2208, .T. ) ; +#2116 = VECTOR ( 'NONE', #2583, 1000.000000000000000 ) ; +#2117 = VERTEX_POINT ( 'NONE', #263 ) ; +#2118 = EDGE_CURVE ( 'NONE', #549, #2266, #1629, .T. ) ; +#2119 = CARTESIAN_POINT ( 'NONE', ( 9.355741625432472100, -1.625216913719064200, 6.177649275846726500 ) ) ; +#2120 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.289692704310191100, 0.3124999999999967800 ) ) ; +#2121 = LINE ( 'NONE', #1773, #2081 ) ; +#2122 = CARTESIAN_POINT ( 'NONE', ( -8.574901629589414000, -1.521432396483636900, 6.245316320953394400 ) ) ; +#2123 = ORIENTED_EDGE ( 'NONE', *, *, #2552, .F. ) ; +#2124 = CARTESIAN_POINT ( 'NONE', ( -6.369768119213783400, -1.555767187667636400, 7.500000000000000000 ) ) ; +#2125 = AXIS2_PLACEMENT_3D ( 'NONE', #1588, #1581, #1574 ) ; +#2126 = ORIENTED_EDGE ( 'NONE', *, *, #1742, .F. ) ; +#2127 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2128 = CARTESIAN_POINT ( 'NONE', ( 9.987345432356081100, 0.1613506199925647800, 6.121173812090646900 ) ) ; +#2129 = CARTESIAN_POINT ( 'NONE', ( 9.646549796740609800, -1.435463380087044400, 7.080948352002725900 ) ) ; +#2130 = CARTESIAN_POINT ( 'NONE', ( -8.813732347348624400, 0.2496837068191166400, 1.218848887804095300 ) ) ; +#2131 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.8416876048223027600, 0.0000000000000000000 ) ) ; +#2132 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.500000000000003100, 4.999999999999999100 ) ) ; +#2133 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999978700, -0.9387505004004305100, 3.750000000000160300 ) ) ; +#2134 = CARTESIAN_POINT ( 'NONE', ( -8.816895208396346100, 0.3651201720962024600, 6.259052412164627400 ) ) ; +#2135 = EDGE_CURVE ( 'NONE', #1024, #2245, #1701, .T. ) ; +#2136 = CARTESIAN_POINT ( 'NONE', ( 9.104569261388377300, -1.535471621816443000, 6.231245127199901600 ) ) ; +#2137 = CARTESIAN_POINT ( 'NONE', ( -7.311155539930722600, -0.07826340576605310400, 1.676761330867160500 ) ) ; +#2138 = APPROVAL_ROLE ( '' ) ; +#2139 = AXIS2_PLACEMENT_3D ( 'NONE', #2555, #2542, #2535 ) ; +#2140 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.500000000000000900, 7.500000000000000000 ) ) ; +#2141 = CARTESIAN_POINT ( 'NONE', ( -6.504828035548925400, -0.1010116187733471100, 5.357684362514147500 ) ) ; +#2142 = CARTESIAN_POINT ( 'NONE', ( -8.539881955674347900, -1.276790497556880900, 7.180474476037130800 ) ) ; +#2143 = ORIENTED_EDGE ( 'NONE', *, *, #1930, .T. ) ; +#2144 = CARTESIAN_POINT ( 'NONE', ( 9.444530684304510300, 0.2313500262482702500, 6.283644390187706800 ) ) ; +#2145 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000000400, -5.000000000000000900, 7.500000000000000000 ) ) ; +#2146 = AXIS2_PLACEMENT_3D ( 'NONE', #1862, #1718, #1724 ) ; +#2147 = ORIENTED_EDGE ( 'NONE', *, *, #972, .T. ) ; +#2148 = CARTESIAN_POINT ( 'NONE', ( -7.850815382295737200, -1.235850611471709800, 1.415962512734831200 ) ) ; +#2149 = ORIENTED_EDGE ( 'NONE', *, *, #50, .T. ) ; +#2150 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#2151 = ADVANCED_FACE ( 'NONE', ( #1634 ), #1526, .F. ) ; +#2152 = VECTOR ( 'NONE', #1569, 1000.000000000000000 ) ; +#2153 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.602085213965211100E-016, 0.0000000000000000000 ) ) ; +#2154 = DIRECTION ( 'NONE', ( 2.602085213965211100E-016, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2155 = ORIENTED_EDGE ( 'NONE', *, *, #1145, .F. ) ; +#2156 = CARTESIAN_POINT ( 'NONE', ( -8.661387073916190000, -1.531754153874055300, 6.250000000000001800 ) ) ; +#2157 = CIRCLE ( 'NONE', #696, 2.500000000000000000 ) ; +#2158 = CARTESIAN_POINT ( 'NONE', ( 6.876649093227509700, -0.4052183431612588200, 6.374182962747449100 ) ) ; +#2159 = EDGE_CURVE ( 'NONE', #1276, #1887, #1561, .T. ) ; +#2160 = VERTEX_POINT ( 'NONE', #109 ) ; +#2161 = CARTESIAN_POINT ( 'NONE', ( 9.275017770399349700, -1.324488468068447200, 7.159183217459234200 ) ) ; +#2162 = ORIENTED_EDGE ( 'NONE', *, *, #2431, .T. ) ; +#2163 = CARTESIAN_POINT ( 'NONE', ( 8.476934860897747700, -1.499999999999997600, 1.264957660359270500 ) ) ; +#2164 = DATE_TIME_ROLE ( 'classification_date' ) ; +#2165 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000001800, 1.741936567896977200, 12.50000000000000000 ) ) ; +#2166 = CARTESIAN_POINT ( 'NONE', ( -6.261103544186604500, -0.5932763564045588900, 3.425650134856524700 ) ) ; +#2167 = EDGE_CURVE ( 'NONE', #1570, #2112, #1600, .T. ) ; +#2168 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2169 = CARTESIAN_POINT ( 'NONE', ( 8.927730531804526100, -1.507377672391857300, 6.250594578705784200 ) ) ; +#2170 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999996400, -1.507377426653423000, 1.249405421179265600 ) ) ; +#2171 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#2172 = CARTESIAN_POINT ( 'NONE', ( -6.618815831353329800, -0.5240946160487775000, 2.440260935184563900 ) ) ; +#2173 = CARTESIAN_POINT ( 'NONE', ( 6.478808769809436500, -0.1181618869076116200, 2.254871672388174500 ) ) ; +#2174 = CARTESIAN_POINT ( 'NONE', ( -8.786756602809713700, 0.4047374712916607700, 6.250000008508834500 ) ) ; +#2175 = CARTESIAN_POINT ( 'NONE', ( 9.093837616628080800, 0.2487344114595340100, 6.336313898685709500 ) ) ; +#2176 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.500000000000000900, 7.500000000000000000 ) ) ; +#2177 = CARTESIAN_POINT ( 'NONE', ( -8.643664488573385500, -1.289692692354015100, 7.187499993384848900 ) ) ; +#2178 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#2179 = ORIENTED_EDGE ( 'NONE', *, *, #300, .F. ) ; +#2180 = CARTESIAN_POINT ( 'NONE', ( -6.707380221263221600, -0.5538092628406323700, 5.200613981780357200 ) ) ; +#2181 = LINE ( 'NONE', #1030, #986 ) ; +#2182 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.531754163448154200, 6.250000000000001800 ) ) ; +#2183 = CARTESIAN_POINT ( 'NONE', ( 9.013199755282267100, -1.289692708592574000, 7.187500002369374900 ) ) ; +#2184 = CARTESIAN_POINT ( 'NONE', ( -5.761035676898149700, -0.2698434879240627100, 3.658977284131195600 ) ) ; +#2185 = ORIENTED_EDGE ( 'NONE', *, *, #2196, .F. ) ; +#2186 = CIRCLE ( 'NONE', #734, 9.999999999999998200 ) ; +#2187 = ORIENTED_EDGE ( 'NONE', *, *, #2560, .T. ) ; +#2188 = CIRCLE ( 'NONE', #747, 3.000000000000000000 ) ; +#2189 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#2190 = ORIENTED_EDGE ( 'NONE', *, *, #273, .T. ) ; +#2191 = CIRCLE ( 'NONE', #749, 2.500000000000000400 ) ; +#2192 = CARTESIAN_POINT ( 'NONE', ( -3.749999999999999600, -2.500000000000000400, 0.0000000000000000000 ) ) ; +#2193 = ORIENTED_EDGE ( 'NONE', *, *, #1598, .F. ) ; +#2194 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.507377426653424100, 6.250594578820734000 ) ) ; +#2195 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, -0.07463715628741655900, 1.598699763224050500 ) ) ; +#2196 = EDGE_CURVE ( 'NONE', #582, #1894, #1594, .T. ) ; +#2197 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#2198 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2199 = AXIS2_PLACEMENT_3D ( 'NONE', #1643, #1639, #1638 ) ; +#2200 = CARTESIAN_POINT ( 'NONE', ( 9.587348138839043800, -1.755572229636482900, 1.392379800758231100 ) ) ; +#2201 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2202 = CARTESIAN_POINT ( 'NONE', ( -3.749999999999999600, -5.000000000000000900, 0.0000000000000000000 ) ) ; +#2203 = APPROVAL_ROLE ( '' ) ; +#2204 = ADVANCED_FACE ( 'NONE', ( #1454 ), #1139, .F. ) ; +#2205 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2206 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2207 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2208 = EDGE_CURVE ( 'NONE', #2606, #1188, #1488, .T. ) ; +#2209 = AXIS2_PLACEMENT_3D ( 'NONE', #1967, #2005, #1984 ) ; +#2210 = ORIENTED_EDGE ( 'NONE', *, *, #2118, .F. ) ; +#2211 = ORIENTED_EDGE ( 'NONE', *, *, #318, .T. ) ; +#2212 = AXIS2_PLACEMENT_3D ( 'NONE', #1619, #1616, #1611 ) ; +#2213 = CARTESIAN_POINT ( 'NONE', ( -8.568178868411102700, -1.500000000000002400, 6.245068550142970100 ) ) ; +#2214 = ORIENTED_EDGE ( 'NONE', *, *, #110, .T. ) ; +#2215 = CARTESIAN_POINT ( 'NONE', ( 6.707380221263151500, -0.5538092628405997300, 2.299386018219742300 ) ) ; +#2216 = VECTOR ( 'NONE', #2351, 1000.000000000000000 ) ; +#2217 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999996400, 0.2487358244187999100, 6.336313132700325000 ) ) ; +#2218 = VERTEX_POINT ( 'NONE', #2425 ) ; +#2219 = LINE ( 'NONE', #311, #2152 ) ; +#2220 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2221 = ORIENTED_EDGE ( 'NONE', *, *, #2593, .F. ) ; +#2222 = VERTEX_POINT ( 'NONE', #745 ) ; +#2223 = ORIENTED_EDGE ( 'NONE', *, *, #97, .T. ) ; +#2224 = CARTESIAN_POINT ( 'NONE', ( -10.17941553451731300, -1.500000000000002700, 1.110708606601235500 ) ) ; +#2225 = CARTESIAN_POINT ( 'NONE', ( 10.58308603893144500, 0.03001104472290874000, 1.629429564495248800 ) ) ; +#2226 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -2.500000000000003100, 4.999999999999999100 ) ) ; +#2227 = AXIS2_PLACEMENT_3D ( 'NONE', #862, #2369, #2110 ) ; +#2228 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#2229 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.500000000000002400, 1.248990654325014400 ) ) ; +#2230 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2231 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 1.249999999999999600, 12.50000000000000000 ) ) ; +#2232 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.807003620809174400E-016, 0.0000000000000000000 ) ) ; +#2233 = DIRECTION ( 'NONE', ( -4.333493537057838900E-014, 0.4930339887499082800, 0.8700100493312450400 ) ) ; +#2234 = DIRECTION ( 'NONE', ( 2.602085213965211100E-016, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2235 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 1.741936567896977200, 10.00000000000000000 ) ) ; +#2236 = CARTESIAN_POINT ( 'NONE', ( -3.749999999999999600, -5.000000000000000900, 7.500000000000000000 ) ) ; +#2237 = ORIENTED_EDGE ( 'NONE', *, *, #714, .F. ) ; +#2238 = EDGE_CURVE ( 'NONE', #1050, #1382, #1521, .T. ) ; +#2239 = ADVANCED_FACE ( 'NONE', ( #1449 ), #1419, .F. ) ; +#2240 = FACE_OUTER_BOUND ( 'NONE', #348, .T. ) ; +#2241 = ORIENTED_EDGE ( 'NONE', *, *, #785, .T. ) ; +#2242 = CARTESIAN_POINT ( 'NONE', ( -8.750000000000000000, -1.500000000000002200, 3.750000000000000000 ) ) ; +#2243 = CIRCLE ( 'NONE', #1265, 2.500000000000000000 ) ; +#2244 = DATE_TIME_ROLE ( 'creation_date' ) ; +#2245 = VERTEX_POINT ( 'NONE', #946 ) ; +#2246 = AXIS2_PLACEMENT_3D ( 'NONE', #2002, #2220, #1980 ) ; +#2247 = LINE ( 'NONE', #106, #2116 ) ; +#2248 = CARTESIAN_POINT ( 'NONE', ( 7.760517011741842300, -0.9721072046139314100, 6.979716786744679000 ) ) ; +#2249 = ORIENTED_EDGE ( 'NONE', *, *, #598, .F. ) ; +#2250 = CARTESIAN_POINT ( 'NONE', ( 9.764625079757607300, -1.481675398110448700, 0.4504651601133982700 ) ) ; +#2251 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000900, 0.1784813000496731900, 6.358312747786372100 ) ) ; +#2252 = CYLINDRICAL_SURFACE ( 'NONE', #783, 2.500000000000000000 ) ; +#2253 = VERTEX_POINT ( 'NONE', #737 ) ; +#2254 = ORIENTED_EDGE ( 'NONE', *, *, #1136, .F. ) ; +#2255 = ORIENTED_EDGE ( 'NONE', *, *, #1101, .F. ) ; +#2256 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#2257 = ADVANCED_FACE ( 'NONE', ( #1388 ), #1357, .T. ) ; +#2258 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2259 = CARTESIAN_POINT ( 'NONE', ( 8.813732347349155600, 0.2496837068187925900, 6.281151112195965800 ) ) ; +#2260 = EDGE_CURVE ( 'NONE', #894, #1486, #1360, .T. ) ; +#2261 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.289692704310192000, 7.187500000000002700 ) ) ; +#2262 = APPROVAL_ROLE ( '' ) ; +#2263 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#2264 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 4.999999999999999100, 5.000000000000066600 ) ) ; +#2265 = CARTESIAN_POINT ( 'NONE', ( 6.460693887389929600, -0.4915523136237322500, 4.767894283949715400 ) ) ; +#2266 = VERTEX_POINT ( 'NONE', #347 ) ; +#2267 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999999100, -6.500000000000000900, 0.0000000000000000000 ) ) ; +#2268 = EDGE_CURVE ( 'NONE', #1486, #549, #2427, .T. ) ; +#2269 = FACE_OUTER_BOUND ( 'NONE', #552, .T. ) ; +#2270 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000003600, 0.1014633370864609800, 2.870978409605417600 ) ) ; +#2271 = ORIENTED_EDGE ( 'NONE', *, *, #612, .F. ) ; +#2272 = CARTESIAN_POINT ( 'NONE', ( 9.435658540727027700, -1.662628835573895600, 1.343902008933578000 ) ) ; +#2273 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#2274 = VERTEX_POINT ( 'NONE', #237 ) ; +#2275 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #271, #1744, #72, #1311, #2548, #1095, #2365, #884, #2158, #682 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0006234381898878277100, 0.001246876379775655400, 0.001870314569663483100, 0.002493752759551310900 ), + .UNSPECIFIED. ) ; +#2276 = SPHERICAL_SURFACE ( 'NONE', #833, 2.500000000000000000 ) ; +#2277 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, 0.0000000000000000000, 2.500000000000000400 ) ) ; +#2278 = ORIENTED_EDGE ( 'NONE', *, *, #726, .F. ) ; +#2279 = CIRCLE ( 'NONE', #801, 2.500000000000000000 ) ; +#2280 = CARTESIAN_POINT ( 'NONE', ( 9.795704756359208800, -1.499999999999997300, 0.4612499999932023200 ) ) ; +#2281 = AXIS2_PLACEMENT_3D ( 'NONE', #2277, #2417, #2258 ) ; +#2282 = ORIENTED_EDGE ( 'NONE', *, *, #2496, .T. ) ; +#2283 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.289692704310185100, 7.187500000000000000 ) ) ; +#2284 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.500000000000002400, 2.500000000000000000 ) ) ; +#2285 = VERTEX_POINT ( 'NONE', #1697 ) ; +#2286 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #2294 ) ; +#2287 = ORIENTED_EDGE ( 'NONE', *, *, #2540, .F. ) ; +#2288 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999978700, -0.9387505004004305100, 3.750000000000160300 ) ) ; +#2289 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.9885340000112352600, -0.0000000000000000000 ) ) ; +#2290 = CARTESIAN_POINT ( 'NONE', ( 6.249999999999980500, -0.9387505004004290700, 3.750000000000160800 ) ) ; +#2291 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999998200, 1.249999999999999600, 12.50000000000000000 ) ) ; +#2292 = EDGE_CURVE ( 'NONE', #385, #1694, #1481, .T. ) ; +#2293 = CARTESIAN_POINT ( 'NONE', ( 10.17762824323358100, 0.1290877593510706100, 1.449944556486090000 ) ) ; +#2294 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#2295 = AXIS2_PLACEMENT_3D ( 'NONE', #2202, #2201, #2198 ) ; +#2296 = AXIS2_PLACEMENT_3D ( 'NONE', #1899, #1972, #1869 ) ; +#2297 = CARTESIAN_POINT ( 'NONE', ( 6.269012345573754500, -1.132100229679125200, 0.0000000000000000000 ) ) ; +#2298 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000002700, -0.8138997632706362900, 3.807291979555585300 ) ) ; +#2299 = CARTESIAN_POINT ( 'NONE', ( 5.811325955962401800, -0.1273718567737974500, 4.201662792209525300 ) ) ; +#2300 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1595, #1813, #1754, #1579, #1655, #1492, #1601, #1590, #1585, #1536, #1578, #1572 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0009294479875822090700, 0.001558812979882915000, 0.002188177972183620400, 0.002817542964484328500, 0.003132225460634682500, 0.003446907956785036100 ), + .UNSPECIFIED. ) ; +#2301 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.1100301479937563200, 1.020898033750313300 ) ) ; +#2302 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.659258262890690000, 3.728334524848830900 ) ) ; +#2303 = ORIENTED_EDGE ( 'NONE', *, *, #2653, .T. ) ; +#2304 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, -0.6907751467796923200, 3.873761889724532300 ) ) ; +#2305 = LINE ( 'NONE', #1373, #84 ) ; +#2306 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2307 = ORIENTED_EDGE ( 'NONE', *, *, #2401, .F. ) ; +#2308 = LINE ( 'NONE', #1077, #2659 ) ; +#2309 = CARTESIAN_POINT ( 'NONE', ( 6.451872049912274100, -0.003648061073915432600, 4.740047523730338800 ) ) ; +#2310 = VERTEX_POINT ( 'NONE', #26 ) ; +#2311 = FACE_BOUND ( 'NONE', #889, .T. ) ; +#2312 = ORIENTED_EDGE ( 'NONE', *, *, #1476, .T. ) ; +#2313 = AXIS2_PLACEMENT_3D ( 'NONE', #2422, #2455, #2506 ) ; +#2314 = CYLINDRICAL_SURFACE ( 'NONE', #876, 1.199999999999999700 ) ; +#2315 = ORIENTED_EDGE ( 'NONE', *, *, #1982, .F. ) ; +#2316 = ORIENTED_EDGE ( 'NONE', *, *, #1810, .F. ) ; +#2317 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.734723475976807100E-016, 0.0000000000000000000 ) ) ; +#2318 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.4611422822719015700, 4.025219052424138700 ) ) ; +#2319 = CARTESIAN_POINT ( 'NONE', ( 6.761037276645796900, -0.5776789688401429100, 5.274295509237833600 ) ) ; +#2320 = PLANE ( 'NONE', #1444 ) ; +#2321 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2322 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1199, #895, #881, #870, #859, #1671, #843, #835, #820, #816, #812, #806, #803, #795, #787, #771, #757, #752, #743, #735 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0002268013626144494800, 0.0005163933332009305800, 0.0008059853037874116200, 0.0009507812890806541000, 0.001095577274373896600, 0.001240373259667139300, 0.001385169244960381700, 0.001674761215546862100, 0.001964353186133342500, 0.002543537127306303700 ), + .UNSPECIFIED. ) ; +#2323 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.3536453619811855100, 4.110203121164449400 ) ) ; +#2324 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, 0.4047375096555682600, 1.249999999999997100 ) ) ; +#2325 = EDGE_CURVE ( 'NONE', #2334, #1276, #1384, .T. ) ; +#2326 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.7143553552659287500, 3.569833929199520900 ) ) ; +#2327 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#2328 = AXIS2_PLACEMENT_3D ( 'NONE', #337, #2501, #2467 ) ; +#2329 = CARTESIAN_POINT ( 'NONE', ( -6.269012345573754500, -1.132100229679126700, 7.500000000000000000 ) ) ; +#2330 = CARTESIAN_POINT ( 'NONE', ( 6.249999999999999100, -0.05672885412859415800, 4.397493846337868100 ) ) ; +#2331 = AXIS2_PLACEMENT_3D ( 'NONE', #2242, #2234, #2232 ) ; +#2332 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, 0.1014633370864700800, 4.629021590394595300 ) ) ; +#2333 = CARTESIAN_POINT ( 'NONE', ( -8.539881955674342600, -1.276790497556928900, 0.3195255239628413400 ) ) ; +#2334 = VERTEX_POINT ( 'NONE', #1264 ) ; +#2335 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000900, -5.000000000000000900, 6.183475024125991500 ) ) ; +#2336 = MECHANICAL_CONTEXT ( 'NONE', #2367, 'mechanical' ) ; +#2337 = FACE_OUTER_BOUND ( 'NONE', #765, .T. ) ; +#2338 = ADVANCED_FACE ( 'NONE', ( #1327 ), #1251, .T. ) ; +#2339 = ORIENTED_EDGE ( 'NONE', *, *, #1930, .F. ) ; +#2340 = CARTESIAN_POINT ( 'NONE', ( 8.927730531804524400, -1.507377672391250400, 1.249405421294221200 ) ) ; +#2341 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.2552283329904582200, 5.013110028224935500 ) ) ; +#2342 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.289692704310191100, 0.3124999999999967800 ) ) ; +#2343 = ORIENTED_EDGE ( 'NONE', *, *, #858, .F. ) ; +#2344 = FACE_OUTER_BOUND ( 'NONE', #456, .T. ) ; +#2345 = ORIENTED_EDGE ( 'NONE', *, *, #598, .T. ) ; +#2346 = EDGE_CURVE ( 'NONE', #2445, #1838, #1288, .T. ) ; +#2347 = CARTESIAN_POINT ( 'NONE', ( -6.922234615672315300, -0.4359526643485051000, 1.079252779867465200 ) ) ; +#2348 = CIRCLE ( 'NONE', #880, 1.200000000000000600 ) ; +#2349 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2350 = ORIENTED_EDGE ( 'NONE', *, *, #2602, .F. ) ; +#2351 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2352 = AXIS2_PLACEMENT_3D ( 'NONE', #2587, #2569, #2566 ) ; +#2353 = ORIENTED_EDGE ( 'NONE', *, *, #961, .F. ) ; +#2354 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, 0.1784813000496751600, 1.141687252213630800 ) ) ; +#2355 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, 0.2920992867763340100, 5.144906832418095100 ) ) ; +#2356 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.500000000000003100, 7.500000000000000000 ) ) ; +#2357 = CARTESIAN_POINT ( 'NONE', ( 6.249999999999999100, 0.3371697330366937900, 5.416009782698365500 ) ) ; +#2358 = CARTESIAN_POINT ( 'NONE', ( -8.418967747197834600, -0.07061636851159144900, 1.216964125292931700 ) ) ; +#2359 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2426, #1603, #1376, #309, #1370, #1352, #1786, #1263, #1281, #1066, #764, #868 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 4.631713711198776500E-019, 0.0007073096494824796700, 0.001414619298964958200, 0.002121928948447436800, 0.002475583773188675800, 0.002829238597929914800 ), + .UNSPECIFIED. ) ; +#2360 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000000, 0.0000000000000000000, 2.500000000000000400 ) ) ; +#2361 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2362 = PLANE ( 'NONE', #828 ) ; +#2363 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000002700, 0.2311042888668403400, 1.268612962214860300 ) ) ; +#2364 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.3449276470447560900, 5.555441110820701100 ) ) ; +#2365 = CARTESIAN_POINT ( 'NONE', ( 7.303800926511158300, -0.6891037472305268100, 6.730041155707495700 ) ) ; +#2366 = EDGE_CURVE ( 'NONE', #2011, #1753, #1321, .T. ) ; +#2367 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#2368 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2369 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#2370 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, 0.3072049348324157300, 1.533763866463036600 ) ) ; +#2371 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, 0.3299626934600722900, 5.829033725833137500 ) ) ; +#2372 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -2.500000000000003100, 2.500000000000000000 ) ) ; +#2373 = ORIENTED_EDGE ( 'NONE', *, *, #674, .F. ) ; +#2374 = LINE ( 'NONE', #657, #958 ) ; +#2375 = VERTEX_POINT ( 'NONE', #839 ) ; +#2376 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2377 = FACE_OUTER_BOUND ( 'NONE', #556, .T. ) ; +#2378 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.734723475976807100E-016, -0.0000000000000000000 ) ) ; +#2379 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.2920992887519686700, 2.355093168099342100 ) ) ; +#2380 = ORIENTED_EDGE ( 'NONE', *, *, #2593, .T. ) ; +#2381 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000001800, 0.3299603690163573400, 1.670950084838083800 ) ) ; +#2382 = CIRCLE ( 'NONE', #989, 2.500000000000000400 ) ; +#2383 = PLANE ( 'NONE', #432 ) ; +#2384 = ADVANCED_FACE ( 'NONE', ( #1284 ), #135, .T. ) ; +#2385 = CYLINDRICAL_SURFACE ( 'NONE', #975, 2.500000000000000000 ) ; +#2386 = EDGE_CURVE ( 'NONE', #1128, #2463, #1499, .T. ) ; +#2387 = ORIENTED_EDGE ( 'NONE', *, *, #1013, .F. ) ; +#2388 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, 0.3072078528123813900, 5.966223232674728600 ) ) ; +#2389 = ORIENTED_EDGE ( 'NONE', *, *, #543, .T. ) ; +#2390 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, 0.3449278333361894800, 1.944535992089827100 ) ) ; +#2391 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #2367 ) ; +#2392 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, 0.2311068069728664800, 6.231380997967442600 ) ) ; +#2393 = CARTESIAN_POINT ( 'NONE', ( -6.536292431165011700, -0.4990952994262397600, 4.923062353119400200 ) ) ; +#2394 = AXIS2_PLACEMENT_3D ( 'NONE', #2628, #2623, #2621 ) ; +#2395 = CARTESIAN_POINT ( 'NONE', ( 9.646549796740618600, -1.435463380087056700, 0.4190516479972703500 ) ) ; +#2396 = CARTESIAN_POINT ( 'NONE', ( -6.259196403375533200, -0.7158747908000026000, 3.480984856974752400 ) ) ; +#2397 = CARTESIAN_POINT ( 'NONE', ( 6.306797289060869900, -0.5794478070835064100, 3.199721050455311700 ) ) ; +#2398 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2399 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000001800, 0.3371719528396111600, 2.083963853910961300 ) ) ; +#2400 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.8416876048223032000, 0.0000000000000000000 ) ) ; +#2401 = EDGE_CURVE ( 'NONE', #317, #894, #929, .T. ) ; +#2402 = ORIENTED_EDGE ( 'NONE', *, *, #726, .T. ) ; +#2403 = CARTESIAN_POINT ( 'NONE', ( 6.750000000000000900, -2.500000000000001800, 0.0000000000000000000 ) ) ; +#2404 = FACE_OUTER_BOUND ( 'NONE', #985, .T. ) ; +#2405 = CARTESIAN_POINT ( 'NONE', ( -11.25000000000000000, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#2406 = ORIENTED_EDGE ( 'NONE', *, *, #1245, .F. ) ; +#2407 = ADVANCED_FACE ( 'NONE', ( #1213 ), #1231, .T. ) ; +#2408 = ORIENTED_EDGE ( 'NONE', *, *, #2386, .F. ) ; +#2409 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000002700, 0.1784829299517587400, 6.358309871653631300 ) ) ; +#2410 = FACE_OUTER_BOUND ( 'NONE', #797, .T. ) ; +#2411 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000001800, 0.2921067249200788300, 2.355061434731987800 ) ) ; +#2412 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#2413 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2414 = VERTEX_POINT ( 'NONE', #1621 ) ; +#2415 = EDGE_CURVE ( 'NONE', #1486, #2439, #1184, .T. ) ; +#2416 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.2552389852517381000, 2.486855712637215300 ) ) ; +#2417 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2418 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2419 = ORIENTED_EDGE ( 'NONE', *, *, #89, .T. ) ; +#2420 = VERTEX_POINT ( 'NONE', #2625 ) ; +#2421 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#2422 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -2.500000000000003100, 4.999999999999999100 ) ) ; +#2423 = AXIS2_PLACEMENT_3D ( 'NONE', #389, #287, #386 ) ; +#2424 = CARTESIAN_POINT ( 'NONE', ( 9.987345432356059800, 0.1613506199921381200, 1.378826187909413000 ) ) ; +#2425 = CARTESIAN_POINT ( 'NONE', ( -6.749999999999981300, -0.3249748766718616500, 1.267415028125280500 ) ) ; +#2426 = CARTESIAN_POINT ( 'NONE', ( 6.750000000000000900, -0.3249748766718710800, 1.267415028125261400 ) ) ; +#2427 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1596, #1058, #2329, #851, #2124, #649, #1912, #459 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0004341254789723393800, 0.0008682509579446787600, 0.001736501915889358400 ), + .UNSPECIFIED. ) ; +#2428 = CARTESIAN_POINT ( 'NONE', ( -10.08823165210784000, -1.500000000000002700, 1.225313980055822800 ) ) ; +#2429 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, 0.1014859662244723400, 2.870937183038926300 ) ) ; +#2430 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 4.156751133619649400, 1.852952387243704800 ) ) ; +#2431 = EDGE_CURVE ( 'NONE', #2218, #1894, #1246, .T. ) ; +#2432 = ADVANCED_FACE ( 'NONE', ( #1155 ), #978, .T. ) ; +#2433 = AXIS2_PLACEMENT_3D ( 'NONE', #955, #916, #945 ) ; +#2434 = CIRCLE ( 'NONE', #1676, 1.199999999999999700 ) ; +#2435 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2436 = ORIENTED_EDGE ( 'NONE', *, *, #746, .F. ) ; +#2437 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.05669603477446014800, 3.102463492272332900 ) ) ; +#2438 = FACE_OUTER_BOUND ( 'NONE', #361, .T. ) ; +#2439 = VERTEX_POINT ( 'NONE', #2448 ) ; +#2440 = CIRCLE ( 'NONE', #1102, 10.00000000000000000 ) ; +#2441 = ORIENTED_EDGE ( 'NONE', *, *, #918, .F. ) ; +#2442 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#2443 = ADVANCED_FACE ( 'NONE', ( #1152 ), #1114, .T. ) ; +#2444 = ORIENTED_EDGE ( 'NONE', *, *, #1495, .T. ) ; +#2445 = VERTEX_POINT ( 'NONE', #2231 ) ; +#2446 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.1100301479937809300, 6.479101966249643000 ) ) ; +#2447 = CARTESIAN_POINT ( 'NONE', ( 9.275017770399337300, -1.324488468068419900, 0.3408167825407744100 ) ) ; +#2448 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999999100, 1.249999999999999600, 7.500000000000000000 ) ) ; +#2449 = AXIS2_PLACEMENT_3D ( 'NONE', #1369, #1367, #1364 ) ; +#2450 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2451 = CARTESIAN_POINT ( 'NONE', ( 7.925430843468290300, -1.277685765625598700, 6.111477854514900400 ) ) ; +#2452 = CARTESIAN_POINT ( 'NONE', ( 9.093837616628027500, 0.2487344114573953300, 1.163686101314669800 ) ) ; +#2453 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.3072049348324146800, 5.966236133536959600 ) ) ; +#2454 = ADVANCED_FACE ( 'NONE', ( #1217 ), #1122, .F. ) ; +#2455 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2456 = CARTESIAN_POINT ( 'NONE', ( 8.539881955674443900, -1.276790497556946600, 7.180474476037169000 ) ) ; +#2457 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.4525655145308590800, 3.485521027172007600 ) ) ; +#2458 = CARTESIAN_POINT ( 'NONE', ( 8.316097335528551700, -1.463266549695135800, 6.217368950122592600 ) ) ; +#2459 = ORIENTED_EDGE ( 'NONE', *, *, #794, .T. ) ; +#2460 = EDGE_CURVE ( 'NONE', #2497, #1986, #1187, .T. ) ; +#2461 = CIRCLE ( 'NONE', #1829, 2.500000000000000400 ) ; +#2462 = AXIS2_PLACEMENT_3D ( 'NONE', #1459, #1293, #1411 ) ; +#2463 = VERTEX_POINT ( 'NONE', #140 ) ; +#2464 = VECTOR ( 'NONE', #341, 1000.000000000000000 ) ; +#2465 = ORIENTED_EDGE ( 'NONE', *, *, #2560, .F. ) ; +#2466 = AXIS2_PLACEMENT_3D ( 'NONE', #1473, #1433, #1387 ) ; +#2467 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2468 = LINE ( 'NONE', #380, #2464 ) ; +#2469 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.602085213965211100E-016, -0.0000000000000000000 ) ) ; +#2470 = ORIENTED_EDGE ( 'NONE', *, *, #961, .T. ) ; +#2471 = CARTESIAN_POINT ( 'NONE', ( 9.013199755282272500, -1.289692708591794900, 0.3124999976310563500 ) ) ; +#2472 = CARTESIAN_POINT ( 'NONE', ( 6.306842884914912500, -0.5793599075535521600, 4.300498448933578500 ) ) ; +#2473 = FACE_OUTER_BOUND ( 'NONE', #998, .T. ) ; +#2474 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #694, #2567, #499, #1748, #281, #1533, #708, #1973, #509, #914, #2180, #2393, #1789, #324, #1577, #115, #1354, #2595 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0002747023786154801000, 0.0007694038403770228500, 0.001264105302138565400, 0.001758806763900108000, 0.002253508225661650800, 0.002748209687423193600, 0.003242911149184736000, 0.003737612610946278800, 0.004232314072707821600 ), + .UNSPECIFIED. ) ; +#2475 = ORIENTED_EDGE ( 'NONE', *, *, #2167, .F. ) ; +#2476 = ORIENTED_EDGE ( 'NONE', *, *, #1674, .F. ) ; +#2477 = ORIENTED_EDGE ( 'NONE', *, *, #1537, .F. ) ; +#2478 = CARTESIAN_POINT ( 'NONE', ( -8.750000000000000000, -1.500000000000002200, 4.949999999999999300 ) ) ; +#2479 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999999100, 0.2920992867763295700, 2.355093167581913300 ) ) ; +#2480 = EDGE_CURVE ( 'NONE', #575, #1276, #1118, .T. ) ; +#2481 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000000, -2.500000000000001300, 4.999999999999999100 ) ) ; +#2482 = AXIS2_PLACEMENT_3D ( 'NONE', #1938, #1775, #1734 ) ; +#2483 = AXIS2_PLACEMENT_3D ( 'NONE', #1739, #1670, #1693 ) ; +#2484 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.602085213965211100E-016, 0.0000000000000000000 ) ) ; +#2485 = CARTESIAN_POINT ( 'NONE', ( 11.04128784747791800, -1.499999999999997300, 2.500000000000000400 ) ) ; +#2486 = EDGE_CURVE ( 'NONE', #1753, #1050, #1088, .T. ) ; +#2487 = ORIENTED_EDGE ( 'NONE', *, *, #2524, .F. ) ; +#2488 = CARTESIAN_POINT ( 'NONE', ( 6.249999999999980500, -0.9387505004004290700, 3.750000000000160800 ) ) ; +#2489 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2490 = CIRCLE ( 'NONE', #1479, 2.499999999999999600 ) ; +#2491 = ORIENTED_EDGE ( 'NONE', *, *, #568, .F. ) ; +#2492 = VECTOR ( 'NONE', #501, 1000.000000000000000 ) ; +#2493 = ORIENTED_EDGE ( 'NONE', *, *, #2496, .F. ) ; +#2494 = LINE ( 'NONE', #506, #2492 ) ; +#2495 = DIRECTION ( 'NONE', ( -2.602085213965211100E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2496 = EDGE_CURVE ( 'NONE', #2285, #575, #1051, .T. ) ; +#2497 = VERTEX_POINT ( 'NONE', #2430 ) ; +#2498 = CARTESIAN_POINT ( 'NONE', ( 6.301104960321804800, -0.6018974851886825800, 4.259441861916642800 ) ) ; +#2499 = ORIENTED_EDGE ( 'NONE', *, *, #1777, .T. ) ; +#2500 = ORIENTED_EDGE ( 'NONE', *, *, #2167, .T. ) ; +#2501 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2502 = CARTESIAN_POINT ( 'NONE', ( 6.042278350797625200, 0.002070511665765101200, 5.057350774082063800 ) ) ; +#2503 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2504 = EDGE_CURVE ( 'NONE', #2634, #2083, #1048, .T. ) ; +#2505 = CARTESIAN_POINT ( 'NONE', ( -3.749999999999999600, -2.500000000000000400, 0.0000000000000000000 ) ) ; +#2506 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2507 = EDGE_CURVE ( 'NONE', #1838, #2420, #995, .T. ) ; +#2508 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #411, #457, #406, #613, #395, #365, #308, #354, #1750, #336, #2215, #1238, #41, #107, #2397, #1940, #33, #13 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0002747023786154730000, 0.0007694038403770416000, 0.001264105302138610300, 0.001758806763900180900, 0.002253508225661751900, 0.002748209687423322400, 0.003242911149184892100, 0.003737612610946462700, 0.004232314072708033200 ), + .UNSPECIFIED. ) ; +#2509 = CARTESIAN_POINT ( 'NONE', ( 6.995829951626894200, -0.02511398329008581200, 5.551054200059083700 ) ) ; +#2510 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000003600, -0.6874803908568768400, 3.634696219582837600 ) ) ; +#2511 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#2512 = ORIENTED_EDGE ( 'NONE', *, *, #2504, .F. ) ; +#2513 = CIRCLE ( 'NONE', #1877, 2.500000000000000000 ) ; +#2514 = ORIENTED_EDGE ( 'NONE', *, *, #938, .F. ) ; +#2515 = VECTOR ( 'NONE', #520, 1000.000000000000000 ) ; +#2516 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999978700, -0.9387505004004305100, 3.750000000000160300 ) ) ; +#2517 = ORIENTED_EDGE ( 'NONE', *, *, #394, .F. ) ; +#2518 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.9387505004003963100, 3.749999999999992000 ) ) ; +#2519 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.659258262890690000, 8.771665475151170500 ) ) ; +#2520 = CIRCLE ( 'NONE', #1127, 2.500000000000000000 ) ; +#2521 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -6.500000000000000900, 7.500000000000000000 ) ) ; +#2522 = CARTESIAN_POINT ( 'NONE', ( -11.25000000000000000, 0.0000000000000000000, 4.999999999999999100 ) ) ; +#2523 = ORIENTED_EDGE ( 'NONE', *, *, #479, .F. ) ; +#2524 = EDGE_CURVE ( 'NONE', #1254, #317, #2644, .T. ) ; +#2525 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.839107728028796700E-016, 1.703464636817278000E-015 ) ) ; +#2526 = FACE_OUTER_BOUND ( 'NONE', #1076, .T. ) ; +#2527 = ORIENTED_EDGE ( 'NONE', *, *, #2292, .F. ) ; +#2528 = ORIENTED_EDGE ( 'NONE', *, *, #785, .F. ) ; +#2529 = CARTESIAN_POINT ( 'NONE', ( -8.574901629589406900, -1.521432396483668500, 1.254683679046605200 ) ) ; +#2530 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -0.9387505004003964300, 3.749999999999992500 ) ) ; +#2531 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -1.499999999999997800, 2.549999999999999400 ) ) ; +#2532 = CARTESIAN_POINT ( 'NONE', ( -6.750000000000001800, -2.500000000000003100, 0.0000000000000000000 ) ) ; +#2533 = CARTESIAN_POINT ( 'NONE', ( -9.112446933256890700, -1.306513758956069400, 0.3258186400470978200 ) ) ; +#2534 = CARTESIAN_POINT ( 'NONE', ( -7.226862179744657900, -0.8487621348751793700, 1.761168522183393700 ) ) ; +#2535 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.8700100493312525900, 0.4930339887498949600 ) ) ; +#2536 = EDGE_CURVE ( 'NONE', #2420, #2439, #965, .T. ) ; +#2537 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2538 = CARTESIAN_POINT ( 'NONE', ( -6.685537144261249200, -0.2123742244524431900, 6.033889341902965800 ) ) ; +#2539 = CARTESIAN_POINT ( 'NONE', ( -8.750000000000001800, 0.4047375096555657100, 6.250000000000001800 ) ) ; +#2540 = EDGE_CURVE ( 'NONE', #1894, #2561, #2108, .T. ) ; +#2541 = CARTESIAN_POINT ( 'NONE', ( -7.945040619986232700, -1.070665523966465300, 0.4479917384344469000 ) ) ; +#2542 = DIRECTION ( 'NONE', ( 8.018227825677444400E-017, 0.4930339887498952400, -0.8700100493312523700 ) ) ; +#2543 = ORIENTED_EDGE ( 'NONE', *, *, #1221, .F. ) ; +#2544 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.499999999999997600, 6.251009345674983600 ) ) ; +#2545 = DIRECTION ( 'NONE', ( -1.387778780781445700E-016, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2546 = VECTOR ( 'NONE', #983, 1000.000000000000000 ) ; +#2547 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.602085213965210100E-016, 0.0000000000000000000 ) ) ; +#2548 = CARTESIAN_POINT ( 'NONE', ( 7.783067766059522400, -0.9867963150768536100, 6.994155303239678800 ) ) ; +#2549 = ORIENTED_EDGE ( 'NONE', *, *, #2536, .F. ) ; +#2550 = FACE_OUTER_BOUND ( 'NONE', #332, .T. ) ; +#2551 = ORIENTED_EDGE ( 'NONE', *, *, #2101, .F. ) ; +#2552 = EDGE_CURVE ( 'NONE', #317, #2218, #1870, .T. ) ; +#2553 = VECTOR ( 'NONE', #680, 1000.000000000000000 ) ; +#2554 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999999100, 4.999778718930982400, 6.250000000000000000 ) ) ; +#2555 = CARTESIAN_POINT ( 'NONE', ( -6.750000000000000900, 0.1100301479937533100, 6.479101966249690000 ) ) ; +#2556 = ORIENTED_EDGE ( 'NONE', *, *, #2480, .F. ) ; +#2557 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#2558 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.6863786727437819500, 3.634190658886348400 ) ) ; +#2559 = ORIENTED_EDGE ( 'NONE', *, *, #1044, .T. ) ; +#2560 = EDGE_CURVE ( 'NONE', #2245, #2589, #1016, .T. ) ; +#2561 = VERTEX_POINT ( 'NONE', #2400 ) ; +#2562 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.289692704310192000, 7.187500000000002700 ) ) ; +#2563 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -2.500000000000003100, 7.500000000000000000 ) ) ; +#2564 = ADVANCED_FACE ( 'NONE', ( #933 ), #130, .F. ) ; +#2565 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000000000, -1.499999999999997600, 3.750000000000000000 ) ) ; +#2566 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2567 = CARTESIAN_POINT ( 'NONE', ( -8.316856316926100900, -1.463439892360991300, 6.217452349651575900 ) ) ; +#2568 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.01466041860293063900, 2.406708541288495000 ) ) ; +#2569 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2570 = DIRECTION ( 'NONE', ( -2.602085213965211100E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#2571 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.289692704310192000, 7.187500000000002700 ) ) ; +#2572 = EDGE_CURVE ( 'NONE', #2642, #1917, #891, .T. ) ; +#2573 = ADVANCED_FACE ( 'NONE', ( #854 ), #829, .F. ) ; +#2574 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -5.000000000000000900, 0.0000000000000000000 ) ) ; +#2575 = VECTOR ( 'NONE', #469, 1000.000000000000100 ) ; +#2576 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2577 = CARTESIAN_POINT ( 'NONE', ( -6.270481662090528400, -0.1570584232507178700, 3.384035533001444700 ) ) ; +#2578 = ORIENTED_EDGE ( 'NONE', *, *, #1637, .F. ) ; +#2579 = CYLINDRICAL_SURFACE ( 'NONE', #1865, 2.500000000000000400 ) ; +#2580 = ORIENTED_EDGE ( 'NONE', *, *, #1674, .T. ) ; +#2581 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2582 = LINE ( 'NONE', #571, #2515 ) ; +#2583 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.602085213965211100E-016, 0.0000000000000000000 ) ) ; +#2584 = ORIENTED_EDGE ( 'NONE', *, *, #3, .T. ) ; +#2585 = CARTESIAN_POINT ( 'NONE', ( -8.750000000000000000, -6.500000000000000900, 3.750000000000000000 ) ) ; +#2586 = VECTOR ( 'NONE', #716, 1000.000000000000000 ) ; +#2587 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -2.500000000000003100, 2.500000000000000000 ) ) ; +#2588 = CARTESIAN_POINT ( 'NONE', ( 6.695218836399552000, -0.2292857428200235100, 1.436268514827050900 ) ) ; +#2589 = VERTEX_POINT ( 'NONE', #1814 ) ; +#2590 = FACE_OUTER_BOUND ( 'NONE', #523, .T. ) ; +#2591 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #1713 ) ; +#2592 = ORIENTED_EDGE ( 'NONE', *, *, #1794, .F. ) ; +#2593 = EDGE_CURVE ( 'NONE', #1983, #492, #931, .T. ) ; +#2594 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -1.289692704310186500, 0.3124999999999990000 ) ) ; +#2595 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999978700, -0.9387505004004305100, 3.750000000000160300 ) ) ; +#2596 = EDGE_CURVE ( 'NONE', #1292, #1931, #852, .T. ) ; +#2597 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, 0.2487358244187841100, 1.163686867299665200 ) ) ; +#2598 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2599 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.9387505004003849900, 3.749999999999980900 ) ) ; +#2600 = PLANE ( 'NONE', #2328 ) ; +#2601 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -2.500000000000000400, 7.500000000000000000 ) ) ; +#2602 = EDGE_CURVE ( 'NONE', #1952, #2375, #823, .T. ) ; +#2603 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#2604 = EDGE_CURVE ( 'NONE', #885, #1128, #2359, .T. ) ; +#2605 = DIRECTION ( 'NONE', ( 1.000000000000000000, 3.469446951953613700E-016, 0.0000000000000000000 ) ) ; +#2606 = VERTEX_POINT ( 'NONE', #827 ) ; +#2607 = CLOSED_SHELL ( 'NONE', ( #585, #1747, #1541, #2573, #1100, #1576, #2010, #279, #573, #2384, #74, #2204, #766, #1282, #979, #724, #2151, #782, #1615, #1407, #2037, #2627, #559, #368, #2338, #2407, #330, #1840, #1628, #2028, #294, #2257, #1961, #471, #2432, #900, #399, #2443, #1821, #370, #2620, #1142, #1604, #2630, #358, #1955, #754, #973, #1494, #2004, #1183, #144, #533, #2454, #2564, #383, #163, #2239, #1397, #507 ) ) ; +#2608 = VECTOR ( 'NONE', #909, 1000.000000000000000 ) ; +#2609 = ORIENTED_EDGE ( 'NONE', *, *, #479, .T. ) ; +#2610 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.1100301479937809300, 6.479101966249643000 ) ) ; +#2611 = LINE ( 'NONE', #913, #2608 ) ; +#2612 = CARTESIAN_POINT ( 'NONE', ( -9.959741346688145900, -1.500000000000002400, 1.295610775334858900 ) ) ; +#2613 = ORIENTED_EDGE ( 'NONE', *, *, #273, .F. ) ; +#2614 = DIRECTION ( 'NONE', ( 1.734723475976807600E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2615 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.500000000000000400, 0.0000000000000000000 ) ) ; +#2616 = ORIENTED_EDGE ( 'NONE', *, *, #1083, .T. ) ; +#2617 = ORIENTED_EDGE ( 'NONE', *, *, #32, .F. ) ; +#2618 = EDGE_CURVE ( 'NONE', #2218, #2310, #798, .T. ) ; +#2619 = CARTESIAN_POINT ( 'NONE', ( 8.749999999999998200, -6.500000000000000900, 4.999999999999999100 ) ) ; +#2620 = ADVANCED_FACE ( 'NONE', ( #896, #772 ), #1385, .T. ) ; +#2621 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.8700100493312534800, 0.4930339887498935100 ) ) ; +#2622 = CARTESIAN_POINT ( 'NONE', ( -6.249999999999999100, 4.659258262890690000, 3.728334524848830000 ) ) ; +#2623 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.4930339887498937400, 0.8700100493312533700 ) ) ; +#2624 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2625 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, 1.249999999999999600, 7.500000000000000000 ) ) ; +#2626 = EDGE_CURVE ( 'NONE', #2445, #516, #736, .T. ) ; +#2627 = ADVANCED_FACE ( 'NONE', ( #704 ), #671, .T. ) ; +#2628 = CARTESIAN_POINT ( 'NONE', ( 6.750000000000000900, 0.1100301479937563200, 1.020898033750313300 ) ) ; +#2629 = CARTESIAN_POINT ( 'NONE', ( -8.750000000000000000, -1.500000000000002400, 3.750000000000000000 ) ) ; +#2630 = ADVANCED_FACE ( 'NONE', ( #707 ), #635, .F. ) ; +#2631 = EDGE_CURVE ( 'NONE', #894, #1254, #667, .T. ) ; +#2632 = CIRCLE ( 'NONE', #1875, 2.500000000000000400 ) ; +#2633 = CARTESIAN_POINT ( 'NONE', ( 8.591829814332486500, 0.005184324483139444000, 6.301809644890273200 ) ) ; +#2634 = VERTEX_POINT ( 'NONE', #2571 ) ; +#2635 = PLANE ( 'NONE', #1343 ) ; +#2636 = LINE ( 'NONE', #666, #2553 ) ; +#2637 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, 0.3449278333361873700, 5.555464007910164700 ) ) ; +#2638 = LINE ( 'NONE', #2264, #1649 ) ; +#2639 = LINE ( 'NONE', #912, #2586 ) ; +#2640 = ORIENTED_EDGE ( 'NONE', *, *, #2135, .T. ) ; +#2641 = CARTESIAN_POINT ( 'NONE', ( 8.574901629589419400, -1.521432396483689300, 6.245316320953394400 ) ) ; +#2642 = VERTEX_POINT ( 'NONE', #2622 ) ; +#2643 = CARTESIAN_POINT ( 'NONE', ( 7.878194630853185400, -1.254493838562263300, 6.097800601610798000 ) ) ; +#2644 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1307, #2538, #869, #2141, #668, #1936, #475, #1716, #250, #1502, #43, #1285 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 1.084202172485504400E-019, 0.0007073096494824573300, 0.001414619298964914700, 0.002121928948447371800, 0.002475583773188600300, 0.002829238597929827600 ), + .UNSPECIFIED. ) ; +#2645 = EDGE_CURVE ( 'NONE', #636, #2420, #630, .T. ) ; +#2646 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 4.999999999999999100, 7.499999999999933400 ) ) ; +#2647 = CARTESIAN_POINT ( 'NONE', ( 8.050776377321071200, -0.1424787588517798500, 6.199179099199524100 ) ) ; +#2648 = CARTESIAN_POINT ( 'NONE', ( 6.249999999999980500, -0.9387505004004290700, 3.750000000000160800 ) ) ; +#2649 = DIRECTION ( 'NONE', ( -2.602085213965211100E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#2650 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.2588190451025179100, 0.9659258262890690900 ) ) ; +#2651 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000900, 0.3449276470447550900, 1.944558889179303500 ) ) ; +#2652 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#2653 = EDGE_CURVE ( 'NONE', #492, #1350, #739, .T. ) ; +#2654 = EDGE_CURVE ( 'NONE', #413, #1647, #610, .T. ) ; +#2655 = LINE ( 'NONE', #2140, #2216 ) ; +#2656 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1353, #1339, #1334 ), + ( #1331, #1326, #1319 ), + ( #1312, #1303, #1300 ), + ( #1289, #1277, #1260 ), + ( #1257, #1249, #1243 ), + ( #1234, #1225, #1219 ), + ( #1212, #1210, #1202 ), + ( #1197, #1195, #1185 ), + ( #1172, #1167, #1163 ), + ( #1161, #1158, #1151 ), + ( #1147, #1135, #1134 ), + ( #1129, #1124, #1119 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -1.225148454908620000E-017, 0.0008242104035962583300, 0.001236315605394393500, 0.001648420807192528800, 0.002472631210788799000, 0.003296841614385069700 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865527900, 1.000000000000000000), + ( 1.000000000000000000, 0.7458313642435363500, 1.000000000000000000), + ( 1.000000000000000000, 0.7821085400636584900, 1.000000000000000000), + ( 1.000000000000000000, 0.8318113535495455000, 1.000000000000000000), + ( 1.000000000000000000, 0.8479078540276627800, 1.000000000000000000), + ( 1.000000000000000000, 0.8783064667575075600, 1.000000000000000000), + ( 1.000000000000000000, 0.8926433373566352600, 1.000000000000000000), + ( 1.000000000000000000, 0.9336126647199781700, 1.000000000000000000), + ( 1.000000000000000000, 0.9575908025920733000, 1.000000000000000000), + ( 1.000000000000000000, 0.9915195602578043000, 1.000000000000000000), + ( 1.000000000000000000, 1.000382643617545600, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2657 = CARTESIAN_POINT ( 'NONE', ( -8.749999999999998200, -1.500000000000002400, 1.248990654325014400 ) ) ; +#2658 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2659 = VECTOR ( 'NONE', #1730, 1000.000000000000000 ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STEP/Trigger_Spring.step b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Trigger_Spring.step new file mode 100644 index 0000000..e3bbc20 --- /dev/null +++ b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Trigger_Spring.step @@ -0,0 +1,1792 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Trigger_Spring.STEP', + '2013-11-10T07:43:33', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999984900, 2.500000000000000000, -17.99999999999999600 ) ) ; +#3 = AXIS2_PLACEMENT_3D ( 'NONE', #454, #1019, #184 ) ; +#4 = EDGE_CURVE ( 'NONE', #1700, #979, #302, .T. ) ; +#5 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #1733, #1028 ) ; +#7 = DATE_TIME_ROLE ( 'classification_date' ) ; +#8 = ADVANCED_FACE ( 'NONE', ( #1749 ), #278, .F. ) ; +#9 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#10 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, -25.93074902771996500, -6.749999999999997300 ) ) ; +#12 = CIRCLE ( 'NONE', #1198, 1.250000000000001100 ) ; +#13 = CYLINDRICAL_SURFACE ( 'NONE', #1641, 2.249999999999999600 ) ; +#14 = ADVANCED_FACE ( 'NONE', ( #308 ), #273, .F. ) ; +#15 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, 2.500000000000000000, -1.250000000000000200 ) ) ; +#16 = CIRCLE ( 'NONE', #1450, 0.5000000000000004400 ) ; +#17 = ORIENTED_EDGE ( 'NONE', *, *, #4, .F. ) ; +#18 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#19 = ORIENTED_EDGE ( 'NONE', *, *, #740, .F. ) ; +#20 = FACE_OUTER_BOUND ( 'NONE', #430, .T. ) ; +#21 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#22 = DIRECTION ( 'NONE', ( -1.734723475976807100E-015, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#23 = EDGE_CURVE ( 'NONE', #1055, #1016, #280, .T. ) ; +#24 = AXIS2_PLACEMENT_3D ( 'NONE', #1530, #1528, #1527 ) ; +#25 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#26 = CYLINDRICAL_SURFACE ( 'NONE', #1361, 2.250000000000000400 ) ; +#27 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000400, -2.500000000000000000, 3.359770019129910200 ) ) ; +#28 = CIRCLE ( 'NONE', #758, 2.249999999999998700 ) ; +#29 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, -2.499999999999998700, -11.25000000000000000 ) ) ; +#30 = AXIS2_PLACEMENT_3D ( 'NONE', #1712, #920, #76 ) ; +#31 = CYLINDRICAL_SURFACE ( 'NONE', #1279, 0.5000000000000000000 ) ; +#32 = FACE_OUTER_BOUND ( 'NONE', #517, .T. ) ; +#33 = EDGE_CURVE ( 'NONE', #1326, #1055, #296, .T. ) ; +#34 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#35 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#36 = ORIENTED_EDGE ( 'NONE', *, *, #1658, .F. ) ; +#37 = CYLINDRICAL_SURFACE ( 'NONE', #1423, 1.249999999999999800 ) ; +#38 = VERTEX_POINT ( 'NONE', #1709 ) ; +#39 = CARTESIAN_POINT ( 'NONE', ( -1.708171262247574000, 2.499999999999998700, -14.73205080756885900 ) ) ; +#40 = ORIENTED_EDGE ( 'NONE', *, *, #1468, .T. ) ; +#41 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#42 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, -7.500000000000000000, 5.000000000000000000 ) ) ; +#43 = CARTESIAN_POINT ( 'NONE', ( -5.303300858899107500, -2.500000000000000000, 9.981533515588910900 ) ) ; +#44 = CARTESIAN_POINT ( 'NONE', ( 0.9099025766973145600, -2.500000000000000000, 14.94460054676673400 ) ) ; +#45 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#46 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999600, -2.500000000000000000, 4.999999999999999100 ) ) ; +#47 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#48 = FACE_OUTER_BOUND ( 'NONE', #911, .T. ) ; +#49 = FACE_OUTER_BOUND ( 'NONE', #1365, .T. ) ; +#50 = LINE ( 'NONE', #1029, #75 ) ; +#51 = AXIS2_PLACEMENT_3D ( 'NONE', #1159, #1280, #1026 ) ; +#52 = EDGE_CURVE ( 'NONE', #242, #1141, #255, .T. ) ; +#53 = EDGE_CURVE ( 'NONE', #193, #1654, #256, .T. ) ; +#54 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, -2.499999999999998700, -13.49999999999999600 ) ) ; +#55 = ORIENTED_EDGE ( 'NONE', *, *, #720, .T. ) ; +#56 = FACE_OUTER_BOUND ( 'NONE', #433, .T. ) ; +#57 = ORIENTED_EDGE ( 'NONE', *, *, #1045, .T. ) ; +#58 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, 2.500000000000000000, -17.99999999999999600 ) ) ; +#59 = ADVANCED_FACE ( 'NONE', ( #234 ), #212, .F. ) ; +#60 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, 2.500000000000000000, -17.99999999999999600 ) ) ; +#61 = VECTOR ( 'NONE', #1482, 1000.000000000000000 ) ; +#62 = ORIENTED_EDGE ( 'NONE', *, *, #826, .T. ) ; +#63 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, 2.500000000000000000, -4.499999999999999100 ) ) ; +#64 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#65 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#66 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #6 ) ; +#67 = ADVANCED_FACE ( 'NONE', ( #276 ), #1577, .F. ) ; +#68 = DIRECTION ( 'NONE', ( 1.868163743359639600E-015, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#69 = EDGE_CURVE ( 'NONE', #1517, #933, #233, .T. ) ; +#70 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#71 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#72 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999996400, -2.499999999999998700, -6.749999999999997300 ) ) ; +#73 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -16.99999999999999600 ) ) ; +#74 = CYLINDRICAL_SURFACE ( 'NONE', #943, 3.249999999999997800 ) ; +#75 = VECTOR ( 'NONE', #1027, 1000.000000000000000 ) ; +#76 = DIRECTION ( 'NONE', ( 7.709882115452474200E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77 = ADVANCED_FACE ( 'NONE', ( #236 ), #1556, .F. ) ; +#78 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#79 = LINE ( 'NONE', #1099, #61 ) ; +#80 = FACE_OUTER_BOUND ( 'NONE', #969, .T. ) ; +#81 = EDGE_CURVE ( 'NONE', #604, #422, #206, .T. ) ; +#82 = FACE_OUTER_BOUND ( 'NONE', #1539, .T. ) ; +#83 = CARTESIAN_POINT ( 'NONE', ( 6.181694990624913000, -25.93074902771996500, -0.8333333333333329300 ) ) ; +#84 = VERTEX_POINT ( 'NONE', #1463 ) ; +#85 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#86 = ORIENTED_EDGE ( 'NONE', *, *, #1487, .F. ) ; +#87 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#88 = AXIS2_PLACEMENT_3D ( 'NONE', #679, #676, #671 ) ; +#89 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, 2.500000000000000400, 3.359770019129964900 ) ) ; +#90 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#91 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trigger_Spring', ( #1611, #468 ), #578 ) ; +#92 = CARTESIAN_POINT ( 'NONE', ( 1.708171262247572200, -2.499999999999998700, -14.73205080756885900 ) ) ; +#93 = ADVANCED_FACE ( 'NONE', ( #208 ), #1479, .F. ) ; +#94 = AXIS2_PLACEMENT_3D ( 'NONE', #1357, #857, #225 ) ; +#95 = EDGE_CURVE ( 'NONE', #1654, #1363, #185, .T. ) ; +#96 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, -2.500000000000000000, 15.00000000000000000 ) ) ; +#97 = CC_DESIGN_APPROVAL ( #290, ( #6 ) ) ; +#98 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#99 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#100 = ADVANCED_FACE ( 'NONE', ( #202 ), #162, .F. ) ; +#101 = FACE_OUTER_BOUND ( 'NONE', #1332, .T. ) ; +#102 = VECTOR ( 'NONE', #1086, 1000.000000000000000 ) ; +#103 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#104 = LINE ( 'NONE', #1087, #102 ) ; +#105 = CYLINDRICAL_SURFACE ( 'NONE', #665, 2.249999999999998700 ) ; +#106 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 12.50000000000000000 ) ) ; +#107 = CYLINDRICAL_SURFACE ( 'NONE', #264, 5.000000000000000000 ) ; +#108 = CIRCLE ( 'NONE', #186, 3.249999999999998700 ) ; +#109 = ORIENTED_EDGE ( 'NONE', *, *, #715, .F. ) ; +#110 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999985800, -2.499999999999998700, -18.00000000000000000 ) ) ; +#111 = CIRCLE ( 'NONE', #1056, 1.249999999999999800 ) ; +#112 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999997300, -25.93074902771996500, -7.749999999999997300 ) ) ; +#113 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, -2.499999999999998700, -8.999999999999998200 ) ) ; +#114 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999985800, -25.93074902771996500, -16.23861278752582000 ) ) ; +#115 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999984900, -25.93074902771996500, -17.99999999999999600 ) ) ; +#116 = LINE ( 'NONE', #1224, #121 ) ; +#117 = AXIS2_PLACEMENT_3D ( 'NONE', #1439, #1421, #1414 ) ; +#118 = CARTESIAN_POINT ( 'NONE', ( -0.9099025766973230000, -2.500000000000000000, 14.94460054676673400 ) ) ; +#119 = CIRCLE ( 'NONE', #569, 0.5000000000000000000 ) ; +#120 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#121 = VECTOR ( 'NONE', #762, 1000.000000000000000 ) ; +#122 = FACE_OUTER_BOUND ( 'NONE', #344, .T. ) ; +#123 = FACE_OUTER_BOUND ( 'NONE', #535, .T. ) ; +#124 = CIRCLE ( 'NONE', #564, 2.249999999999996900 ) ; +#125 = ORIENTED_EDGE ( 'NONE', *, *, #53, .F. ) ; +#126 = CYLINDRICAL_SURFACE ( 'NONE', #882, 3.249999999999997800 ) ; +#127 = VERTEX_POINT ( 'NONE', #1355 ) ; +#128 = AXIS2_PLACEMENT_3D ( 'NONE', #1565, #18, #619 ) ; +#129 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#130 = EDGE_CURVE ( 'NONE', #647, #1097, #231, .T. ) ; +#131 = ADVANCED_FACE ( 'NONE', ( #183 ), #141, .F. ) ; +#132 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#133 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, 2.500000000000000000, -8.597800040494614000E-016 ) ) ; +#134 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#135 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, -2.499999999999998700, -8.597800040494614000E-016 ) ) ; +#136 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#137 = ADVANCED_FACE ( 'NONE', ( #164, #138, #179, #157, #143 ), #1312, .F. ) ; +#138 = FACE_BOUND ( 'NONE', #970, .T. ) ; +#139 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#140 = APPROVAL_ROLE ( '' ) ; +#141 = CYLINDRICAL_SURFACE ( 'NONE', #1025, 1.250000000000001100 ) ; +#142 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -2.499999999999998700, -2.168404344971008900E-016 ) ) ; +#143 = FACE_BOUND ( 'NONE', #1073, .T. ) ; +#144 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, 2.500000000000000000, 5.000000000000000000 ) ) ; +#145 = CIRCLE ( 'NONE', #1306, 2.250000000000001800 ) ; +#146 = VECTOR ( 'NONE', #1761, 1000.000000000000000 ) ; +#147 = ORIENTED_EDGE ( 'NONE', *, *, #1638, .F. ) ; +#148 = ADVANCED_FACE ( 'NONE', ( #123 ), #105, .F. ) ; +#149 = CYLINDRICAL_SURFACE ( 'NONE', #1581, 2.250000000000000400 ) ; +#150 = AXIS2_PLACEMENT_3D ( 'NONE', #912, #364, #1294 ) ; +#151 = EDGE_CURVE ( 'NONE', #325, #1372, #116, .T. ) ; +#152 = EDGE_CURVE ( 'NONE', #38, #373, #119, .T. ) ; +#153 = CARTESIAN_POINT ( 'NONE', ( 5.999999999999989300, -2.499999999999998700, -16.99999999999999600 ) ) ; +#154 = AXIS2_PLACEMENT_3D ( 'NONE', #801, #770, #850 ) ; +#155 = CARTESIAN_POINT ( 'NONE', ( -6.181694990624912100, 2.500000000000000000, -0.8333333333333334800 ) ) ; +#156 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#157 = FACE_BOUND ( 'NONE', #323, .T. ) ; +#158 = PLANE ( 'NONE', #128 ) ; +#159 = VECTOR ( 'NONE', #1339, 1000.000000000000000 ) ; +#160 = EDGE_CURVE ( 'NONE', #782, #574, #108, .T. ) ; +#161 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, -2.499999999999998700, 0.0000000000000000000 ) ) ; +#162 = CYLINDRICAL_SURFACE ( 'NONE', #474, 2.249999999999996900 ) ; +#163 = CIRCLE ( 'NONE', #901, 3.249999999999998700 ) ; +#164 = FACE_OUTER_BOUND ( 'NONE', #831, .T. ) ; +#165 = CYLINDRICAL_SURFACE ( 'NONE', #796, 2.250000000000001800 ) ; +#166 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, -7.500000000000000000, 10.00000000000000000 ) ) ; +#167 = ORIENTED_EDGE ( 'NONE', *, *, #863, .F. ) ; +#168 = CIRCLE ( 'NONE', #1739, 1.249999999999999600 ) ; +#169 = VERTEX_POINT ( 'NONE', #1204 ) ; +#170 = ADVANCED_FACE ( 'NONE', ( #101 ), #74, .T. ) ; +#171 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#172 = EDGE_CURVE ( 'NONE', #584, #1727, #104, .T. ) ; +#173 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999985800, -2.499999999999998700, -16.23861278752582000 ) ) ; +#174 = AXIS2_PLACEMENT_3D ( 'NONE', #636, #631, #628 ) ; +#175 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#176 = ADVANCED_FACE ( 'NONE', ( #80 ), #1090, .F. ) ; +#177 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884037400E-016, -2.500000000000000000, 7.500000000000000000 ) ) ; +#178 = CARTESIAN_POINT ( 'NONE', ( 5.999999999999989300, 2.500000000000000000, -16.99999999999999600 ) ) ; +#179 = FACE_BOUND ( 'NONE', #1033, .T. ) ; +#180 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999985800, -25.93074902771996500, -16.99999999999999600 ) ) ; +#181 = AXIS2_PLACEMENT_3D ( 'NONE', #759, #1540, #617 ) ; +#182 = EDGE_CURVE ( 'NONE', #761, #1100, #50, .T. ) ; +#183 = FACE_OUTER_BOUND ( 'NONE', #415, .T. ) ; +#184 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.734723475976806800E-016, 0.0000000000000000000 ) ) ; +#185 = CIRCLE ( 'NONE', #1488, 2.500000000000000400 ) ; +#186 = AXIS2_PLACEMENT_3D ( 'NONE', #1160, #1158, #1148 ) ; +#187 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999996400, -2.499999999999998700, -8.999999999999998200 ) ) ; +#188 = LINE ( 'NONE', #832, #146 ) ; +#189 = ORIENTED_EDGE ( 'NONE', *, *, #867, .T. ) ; +#190 = FACE_OUTER_BOUND ( 'NONE', #561, .T. ) ; +#191 = ORIENTED_EDGE ( 'NONE', *, *, #530, .F. ) ; +#192 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, 2.500000000000000000, 10.00000000000000000 ) ) ; +#193 = VERTEX_POINT ( 'NONE', #1084 ) ; +#194 = FACE_OUTER_BOUND ( 'NONE', #1340, .T. ) ; +#195 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#196 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000900, -2.500000000000000000, 15.00000000000000000 ) ) ; +#197 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999987600, -2.499999999999998700, -16.99999999999999600 ) ) ; +#198 = ADVANCED_FACE ( 'NONE', ( #56 ), #31, .F. ) ; +#199 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -16.99999999999999600 ) ) ; +#200 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#201 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, 2.500000000000000000, -16.74999999999999300 ) ) ; +#202 = FACE_OUTER_BOUND ( 'NONE', #1381, .T. ) ; +#203 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#204 = ADVANCED_FACE ( 'NONE', ( #48 ), #26, .T. ) ; +#205 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#206 = CIRCLE ( 'NONE', #1228, 2.250000000000001800 ) ; +#207 = EDGE_CURVE ( 'NONE', #790, #1248, #28, .T. ) ; +#208 = FACE_OUTER_BOUND ( 'NONE', #693, .T. ) ; +#209 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#210 = LINE ( 'NONE', #820, #214 ) ; +#211 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#212 = CYLINDRICAL_SURFACE ( 'NONE', #883, 0.5000000000000000000 ) ; +#213 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#214 = VECTOR ( 'NONE', #814, 1000.000000000000000 ) ; +#215 = AXIS2_PLACEMENT_3D ( 'NONE', #1136, #1132, #1128 ) ; +#216 = ORIENTED_EDGE ( 'NONE', *, *, #588, .F. ) ; +#217 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, 2.500000000000000000, -4.499999999999999100 ) ) ; +#218 = CYLINDRICAL_SURFACE ( 'NONE', #1672, 2.250000000000001800 ) ; +#219 = ORIENTED_EDGE ( 'NONE', *, *, #1715, .T. ) ; +#220 = VERTEX_POINT ( 'NONE', #957 ) ; +#221 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999985800, 2.500000000000000000, -16.23861278752582000 ) ) ; +#222 = ADVANCED_FACE ( 'NONE', ( #32 ), #13, .T. ) ; +#223 = AXIS2_PLACEMENT_3D ( 'NONE', #54, #1642, #68 ) ; +#224 = CARTESIAN_POINT ( 'NONE', ( -5.303300858899107500, 2.500000000000000900, 9.981533515588910900 ) ) ; +#225 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#226 = EDGE_CURVE ( 'NONE', #1483, #1591, #16, .T. ) ; +#227 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#228 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#229 = ADVANCED_FACE ( 'NONE', ( #20 ), #1770, .T. ) ; +#230 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#231 = LINE ( 'NONE', #1382, #159 ) ; +#232 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, -2.499999999999998700, -8.597800040494614000E-016 ) ) ; +#233 = CIRCLE ( 'NONE', #600, 2.500000000000000400 ) ; +#234 = FACE_OUTER_BOUND ( 'NONE', #520, .T. ) ; +#235 = CIRCLE ( 'NONE', #1226, 2.250000000000000400 ) ; +#236 = FACE_OUTER_BOUND ( 'NONE', #985, .T. ) ; +#237 = FACE_OUTER_BOUND ( 'NONE', #1536, .T. ) ; +#238 = ORIENTED_EDGE ( 'NONE', *, *, #509, .T. ) ; +#239 = ADVANCED_FACE ( 'NONE', ( #49 ), #1753, .T. ) ; +#240 = CIRCLE ( 'NONE', #1108, 1.250000000000001100 ) ; +#241 = EDGE_LOOP ( 'NONE', ( #1213, #1266, #378, #1049 ) ) ; +#242 = VERTEX_POINT ( 'NONE', #752 ) ; +#243 = CYLINDRICAL_SURFACE ( 'NONE', #1486, 1.250000000000001100 ) ; +#244 = VECTOR ( 'NONE', #1686, 1000.000000000000000 ) ; +#245 = CARTESIAN_POINT ( 'NONE', ( 5.303300858899104900, -2.501000000000000300, 12.80330085889910800 ) ) ; +#246 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#247 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#248 = AXIS2_PLACEMENT_3D ( 'NONE', #1140, #1002, #1270 ) ; +#249 = EDGE_CURVE ( 'NONE', #1404, #1100, #12, .T. ) ; +#250 = EDGE_CURVE ( 'NONE', #220, #1473, #1772, .T. ) ; +#251 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#252 = AXIS2_PLACEMENT_3D ( 'NONE', #685, #648, #644 ) ; +#253 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, -2.499999999999998700, -8.999999999999998200 ) ) ; +#254 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#255 = LINE ( 'NONE', #1724, #244 ) ; +#256 = LINE ( 'NONE', #1698, #259 ) ; +#257 = VECTOR ( 'NONE', #1717, 1000.000000000000000 ) ; +#258 = FACE_OUTER_BOUND ( 'NONE', #1208, .T. ) ; +#259 = VECTOR ( 'NONE', #1684, 1000.000000000000000 ) ; +#260 = VECTOR ( 'NONE', #394, 1000.000000000000000 ) ; +#261 = ORIENTED_EDGE ( 'NONE', *, *, #650, .F. ) ; +#262 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#263 = FACE_OUTER_BOUND ( 'NONE', #1092, .T. ) ; +#264 = AXIS2_PLACEMENT_3D ( 'NONE', #548, #965, #120 ) ; +#265 = ORIENTED_EDGE ( 'NONE', *, *, #151, .T. ) ; +#266 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#267 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999985800, 2.500000000000000000, -16.99999999999999600 ) ) ; +#268 = DIRECTION ( 'NONE', ( 1.154631945610162800E-014, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#269 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#270 = EDGE_CURVE ( 'NONE', #220, #979, #1732, .T. ) ; +#271 = ADVANCED_FACE ( 'NONE', ( #1747 ), #1702, .T. ) ; +#272 = CARTESIAN_POINT ( 'NONE', ( 1.925929944387235900E-031, 2.500000000000000000, 7.500000000000000000 ) ) ; +#273 = CYLINDRICAL_SURFACE ( 'NONE', #971, 1.250000000000001100 ) ; +#274 = AXIS2_PLACEMENT_3D ( 'NONE', #597, #594, #587 ) ; +#275 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999987600, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#276 = FACE_OUTER_BOUND ( 'NONE', #542, .T. ) ; +#277 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#278 = CYLINDRICAL_SURFACE ( 'NONE', #1062, 0.5000000000000004400 ) ; +#279 = VECTOR ( 'NONE', #1106, 1000.000000000000000 ) ; +#280 = LINE ( 'NONE', #1737, #298 ) ; +#281 = CYLINDRICAL_SURFACE ( 'NONE', #1275, 3.249999999999997800 ) ; +#282 = ADVANCED_FACE ( 'NONE', ( #1769 ), #624, .F. ) ; +#283 = VERTEX_POINT ( 'NONE', #616 ) ; +#284 = CIRCLE ( 'NONE', #1444, 3.249999999999997800 ) ; +#285 = VERTEX_POINT ( 'NONE', #267 ) ; +#286 = ORIENTED_EDGE ( 'NONE', *, *, #1194, .F. ) ; +#287 = AXIS2_PLACEMENT_3D ( 'NONE', #792, #735, #336 ) ; +#288 = EDGE_CURVE ( 'NONE', #1147, #393, #1722, .T. ) ; +#289 = FACE_OUTER_BOUND ( 'NONE', #803, .T. ) ; +#290 = APPROVAL ( #704, 'UNSPECIFIED' ) ; +#291 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#292 = CARTESIAN_POINT ( 'NONE', ( 2.180415093947895200, 2.500000000000000000, -14.56777736655967600 ) ) ; +#293 = ADVANCED_FACE ( 'NONE', ( #1699 ), #1675, .F. ) ; +#294 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999987600, 2.500000000000000000, -16.99999999999999600 ) ) ; +#295 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999984000, -25.93074902771996500, -18.00000000000000000 ) ) ; +#296 = LINE ( 'NONE', #1736, #257 ) ; +#297 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#298 = VECTOR ( 'NONE', #1742, 1000.000000000000000 ) ; +#299 = ADVANCED_FACE ( 'NONE', ( #1705 ), #638, .F. ) ; +#300 = VECTOR ( 'NONE', #1636, 1000.000000000000000 ) ; +#301 = FACE_OUTER_BOUND ( 'NONE', #1303, .T. ) ; +#302 = LINE ( 'NONE', #1163, #300 ) ; +#303 = CARTESIAN_POINT ( 'NONE', ( -2.180415093947896100, -25.93074902771996500, -14.56777736655967600 ) ) ; +#304 = LINE ( 'NONE', #1490, #279 ) ; +#305 = VERTEX_POINT ( 'NONE', #514 ) ; +#306 = LINE ( 'NONE', #1201, #260 ) ; +#307 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#308 = FACE_OUTER_BOUND ( 'NONE', #449, .T. ) ; +#309 = EDGE_CURVE ( 'NONE', #1269, #868, #1726, .T. ) ; +#310 = EDGE_CURVE ( 'NONE', #658, #625, #1681, .T. ) ; +#311 = AXIS2_PLACEMENT_3D ( 'NONE', #1242, #1240, #1232 ) ; +#312 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#313 = ADVANCED_FACE ( 'NONE', ( #1669 ), #1631, .F. ) ; +#314 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#315 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#316 = CARTESIAN_POINT ( 'NONE', ( -1.925929944387235900E-031, 2.500000000000000000, 7.500000000000000000 ) ) ; +#317 = AXIS2_PLACEMENT_3D ( 'NONE', #177, #41, #1304 ) ; +#318 = ORIENTED_EDGE ( 'NONE', *, *, #81, .T. ) ; +#319 = ORIENTED_EDGE ( 'NONE', *, *, #152, .T. ) ; +#320 = EDGE_CURVE ( 'NONE', #1703, #870, #1648, .T. ) ; +#321 = CARTESIAN_POINT ( 'NONE', ( -5.999999999999991100, 2.500000000000000000, -16.99999999999999600 ) ) ; +#322 = ADVANCED_FACE ( 'NONE', ( #1653 ), #1613, .F. ) ; +#323 = EDGE_LOOP ( 'NONE', ( #1350, #539, #812, #713 ) ) ; +#324 = VECTOR ( 'NONE', #489, 1000.000000000000000 ) ; +#325 = VERTEX_POINT ( 'NONE', #383 ) ; +#326 = CYLINDRICAL_SURFACE ( 'NONE', #1192, 3.249999999999997800 ) ; +#327 = ORIENTED_EDGE ( 'NONE', *, *, #783, .T. ) ; +#328 = CIRCLE ( 'NONE', #94, 2.500000000000000400 ) ; +#329 = ORIENTED_EDGE ( 'NONE', *, *, #939, .T. ) ; +#330 = ORIENTED_EDGE ( 'NONE', *, *, #1549, .F. ) ; +#331 = CARTESIAN_POINT ( 'NONE', ( 2.180415093947895200, -2.499999999999998700, -14.56777736655967600 ) ) ; +#332 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999987600, 2.500000000000000000, -16.74999999999999300 ) ) ; +#333 = CIRCLE ( 'NONE', #968, 2.249999999999998700 ) ; +#334 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#335 = CARTESIAN_POINT ( 'NONE', ( -5.809016994374948300, -2.499999999999998700, -0.5000000000000000000 ) ) ; +#336 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#337 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#338 = PLANE ( 'NONE', #1509 ) ; +#339 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#340 = CARTESIAN_POINT ( 'NONE', ( -0.9099025766973234400, -1.578429360648634200E-016, 14.94460054676673400 ) ) ; +#341 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, 2.500000000000000000, -4.499999999999999100 ) ) ; +#342 = ADVANCED_FACE ( 'NONE', ( #1677, #1615, #1633, #1628, #1609 ), #361, .F. ) ; +#343 = CARTESIAN_POINT ( 'NONE', ( 5.809016994374948300, 2.499999999999998700, -0.5000000000000000000 ) ) ; +#344 = EDGE_LOOP ( 'NONE', ( #1199, #894, #936, #613 ) ) ; +#345 = AXIS2_PLACEMENT_3D ( 'NONE', #58, #899, #1690 ) ; +#346 = EDGE_CURVE ( 'NONE', #84, #1467, #1571, .T. ) ; +#347 = EDGE_CURVE ( 'NONE', #1385, #400, #1597, .T. ) ; +#348 = ORIENTED_EDGE ( 'NONE', *, *, #1057, .T. ) ; +#349 = VERTEX_POINT ( 'NONE', #221 ) ; +#350 = AXIS2_PLACEMENT_3D ( 'NONE', #643, #576, #479 ) ; +#351 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999996400, -25.93074902771996500, -7.749999999999996400 ) ) ; +#352 = LINE ( 'NONE', #295, #324 ) ; +#353 = ORIENTED_EDGE ( 'NONE', *, *, #1583, .T. ) ; +#354 = FACE_OUTER_BOUND ( 'NONE', #475, .T. ) ; +#355 = ORIENTED_EDGE ( 'NONE', *, *, #1227, .T. ) ; +#356 = ADVANCED_FACE ( 'NONE', ( #1551 ), #338, .F. ) ; +#357 = VECTOR ( 'NONE', #639, 1000.000000000000000 ) ; +#358 = ORIENTED_EDGE ( 'NONE', *, *, #1673, .T. ) ; +#359 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#360 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, -2.499999999999998700, -10.24999999999999800 ) ) ; +#361 = PLANE ( 'NONE', #1331 ) ; +#362 = AXIS2_PLACEMENT_3D ( 'NONE', #1710, #1570, #1562 ) ; +#363 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999985800, -25.93074902771996500, 0.0000000000000000000 ) ) ; +#364 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#366 = ORIENTED_EDGE ( 'NONE', *, *, #1741, .T. ) ; +#367 = CARTESIAN_POINT ( 'NONE', ( -5.303300858899107500, 2.500000000000000000, 7.500000000000051500 ) ) ; +#368 = EDGE_LOOP ( 'NONE', ( #1059, #348, #1773, #1314 ) ) ; +#369 = EDGE_CURVE ( 'NONE', #1217, #1016, #1567, .T. ) ; +#370 = ORIENTED_EDGE ( 'NONE', *, *, #130, .T. ) ; +#371 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#372 = CYLINDRICAL_SURFACE ( 'NONE', #418, 2.500000000000000400 ) ; +#373 = VERTEX_POINT ( 'NONE', #155 ) ; +#374 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, 2.500000000000000000, 15.00000000000000000 ) ) ; +#375 = CIRCLE ( 'NONE', #386, 2.249999999999996900 ) ; +#376 = EDGE_CURVE ( 'NONE', #1248, #584, #1544, .T. ) ; +#377 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1744, #838, ( #1671 ) ) ; +#378 = ORIENTED_EDGE ( 'NONE', *, *, #1045, .F. ) ; +#379 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#380 = CIRCLE ( 'NONE', #223, 3.249999999999997800 ) ; +#381 = VERTEX_POINT ( 'NONE', #192 ) ; +#382 = VERTEX_POINT ( 'NONE', #173 ) ; +#383 = CARTESIAN_POINT ( 'NONE', ( 5.303300858899104900, -2.500000000000000000, 9.981533515588910900 ) ) ; +#384 = FACE_OUTER_BOUND ( 'NONE', #1649, .T. ) ; +#385 = DIRECTION ( 'NONE', ( 1.734723475976807100E-016, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#386 = AXIS2_PLACEMENT_3D ( 'NONE', #903, #1230, #10 ) ; +#387 = EDGE_CURVE ( 'NONE', #761, #285, #1504, .T. ) ; +#388 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, 2.500000000000000000, -2.168404344971008900E-016 ) ) ; +#389 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#390 = DIRECTION ( 'NONE', ( 2.668805347656628100E-015, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#391 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000400, -7.500000000000000000, 10.00000000000000000 ) ) ; +#392 = ORIENTED_EDGE ( 'NONE', *, *, #1583, .F. ) ; +#393 = VERTEX_POINT ( 'NONE', #96 ) ; +#394 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#395 = ORIENTED_EDGE ( 'NONE', *, *, #681, .T. ) ; +#396 = VECTOR ( 'NONE', #590, 1000.000000000000000 ) ; +#397 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#398 = ORIENTED_EDGE ( 'NONE', *, *, #172, .F. ) ; +#399 = LINE ( 'NONE', #726, #357 ) ; +#400 = VERTEX_POINT ( 'NONE', #118 ) ; +#401 = VECTOR ( 'NONE', #1036, 1000.000000000000000 ) ; +#402 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, 2.500000000000000000, 15.00000000000000000 ) ) ; +#403 = EDGE_LOOP ( 'NONE', ( #702, #1745, #1431, #743 ) ) ; +#404 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#405 = CARTESIAN_POINT ( 'NONE', ( -1.708171262247574000, -25.93074902771996500, -14.73205080756885900 ) ) ; +#406 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#407 = EDGE_CURVE ( 'NONE', #1289, #574, #1542, .T. ) ; +#408 = CARTESIAN_POINT ( 'NONE', ( 5.809016994374948300, -2.499999999999998700, -0.5000000000000000000 ) ) ; +#409 = EDGE_CURVE ( 'NONE', #1467, #824, #1520, .T. ) ; +#410 = AXIS2_PLACEMENT_3D ( 'NONE', #1295, #1284, #1282 ) ; +#411 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#412 = EDGE_LOOP ( 'NONE', ( #1453, #1730, #657, #675 ) ) ; +#413 = ORIENTED_EDGE ( 'NONE', *, *, #842, .T. ) ; +#414 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#415 = EDGE_LOOP ( 'NONE', ( #1364, #1368, #1403, #1424 ) ) ; +#416 = CYLINDRICAL_SURFACE ( 'NONE', #3, 5.000000000000000000 ) ; +#417 = ORIENTED_EDGE ( 'NONE', *, *, #683, .T. ) ; +#418 = AXIS2_PLACEMENT_3D ( 'NONE', #909, #1399, #447 ) ; +#419 = CIRCLE ( 'NONE', #471, 2.500000000000000400 ) ; +#420 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#421 = FACE_OUTER_BOUND ( 'NONE', #886, .T. ) ; +#422 = VERTEX_POINT ( 'NONE', #110 ) ; +#423 = EDGE_CURVE ( 'NONE', #658, #690, #1480, .T. ) ; +#424 = ORIENTED_EDGE ( 'NONE', *, *, #207, .T. ) ; +#425 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#426 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#427 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#428 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#429 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#430 = EDGE_LOOP ( 'NONE', ( #635, #216, #956, #1752 ) ) ; +#431 = ORIENTED_EDGE ( 'NONE', *, *, #1277, .T. ) ; +#432 = CARTESIAN_POINT ( 'NONE', ( -1.708171262247574000, -2.499999999999998700, -14.73205080756885900 ) ) ; +#433 = EDGE_LOOP ( 'NONE', ( #1502, #1514, #1559, #1585 ) ) ; +#434 = CYLINDRICAL_SURFACE ( 'NONE', #846, 7.500000000000000000 ) ; +#435 = ORIENTED_EDGE ( 'NONE', *, *, #69, .F. ) ; +#436 = CIRCLE ( 'NONE', #754, 0.5000000000000000000 ) ; +#437 = ORIENTED_EDGE ( 'NONE', *, *, #1574, .F. ) ; +#438 = ORIENTED_EDGE ( 'NONE', *, *, #646, .F. ) ; +#439 = AXIS2_PLACEMENT_3D ( 'NONE', #498, #1417, #642 ) ; +#440 = EDGE_CURVE ( 'NONE', #790, #1695, #1497, .T. ) ; +#441 = EDGE_CURVE ( 'NONE', #1467, #1141, #1476, .T. ) ; +#442 = LINE ( 'NONE', #166, #401 ) ; +#443 = AXIS2_PLACEMENT_3D ( 'NONE', #491, #499, #458 ) ; +#444 = APPROVAL_ROLE ( '' ) ; +#445 = CARTESIAN_POINT ( 'NONE', ( -5.999999999999991100, -25.93074902771996500, -16.99999999999999600 ) ) ; +#446 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#448 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1652, #618, ( #6 ) ) ; +#449 = EDGE_LOOP ( 'NONE', ( #1094, #1129, #1131, #1135 ) ) ; +#450 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#451 = ORIENTED_EDGE ( 'NONE', *, *, #958, .F. ) ; +#452 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#453 = ORIENTED_EDGE ( 'NONE', *, *, #1582, .F. ) ; +#454 = CARTESIAN_POINT ( 'NONE', ( 0.3033008588991049100, 7.523163845262636800E-032, 9.981533515588910900 ) ) ; +#455 = FACE_OUTER_BOUND ( 'NONE', #645, .T. ) ; +#456 = ORIENTED_EDGE ( 'NONE', *, *, #1582, .T. ) ; +#457 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#458 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#459 = LINE ( 'NONE', #764, #396 ) ; +#460 = ORIENTED_EDGE ( 'NONE', *, *, #1127, .F. ) ; +#461 = CIRCLE ( 'NONE', #317, 7.500000000000000000 ) ; +#462 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, -2.499999999999998700, -13.49999999999999600 ) ) ; +#463 = ORIENTED_EDGE ( 'NONE', *, *, #1651, .F. ) ; +#464 = EDGE_CURVE ( 'NONE', #933, #1626, #1516, .T. ) ; +#465 = DIRECTION ( 'NONE', ( 1.734723475976807100E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#466 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, -2.499999999999998700, 15.00000000000000000 ) ) ; +#467 = EDGE_CURVE ( 'NONE', #1188, #875, #1458, .T. ) ; +#468 = AXIS2_PLACEMENT_3D ( 'NONE', #1760, #1775, #878 ) ; +#469 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999985800, -2.499999999999998700, 0.0000000000000000000 ) ) ; +#470 = DIRECTION ( 'NONE', ( 1.734723475976807100E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#471 = AXIS2_PLACEMENT_3D ( 'NONE', #1687, #897, #211 ) ; +#472 = EDGE_CURVE ( 'NONE', #1422, #979, #1455, .T. ) ; +#473 = ORIENTED_EDGE ( 'NONE', *, *, #873, .F. ) ; +#474 = AXIS2_PLACEMENT_3D ( 'NONE', #1416, #1415, #1418 ) ; +#475 = EDGE_LOOP ( 'NONE', ( #1153, #1166, #1190, #1197 ) ) ; +#476 = ORIENTED_EDGE ( 'NONE', *, *, #1394, .F. ) ; +#477 = CIRCLE ( 'NONE', #510, 3.249999999999997800 ) ; +#478 = ORIENTED_EDGE ( 'NONE', *, *, #1756, .F. ) ; +#479 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#480 = FACE_OUTER_BOUND ( 'NONE', #412, .T. ) ; +#481 = EDGE_LOOP ( 'NONE', ( #1287, #1308, #1324, #1342 ) ) ; +#482 = ORIENTED_EDGE ( 'NONE', *, *, #962, .T. ) ; +#483 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#484 = CIRCLE ( 'NONE', #1547, 2.250000000000000400 ) ; +#485 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#486 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#487 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#488 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000900, -25.93074902771996500, -1.250000000000000400 ) ) ; +#489 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#490 = CARTESIAN_POINT ( 'NONE', ( 5.303300858899104900, 2.500000000000000000, 9.981533515588910900 ) ) ; +#491 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, 2.500000000000000000, -13.49999999999999600 ) ) ; +#492 = VERTEX_POINT ( 'NONE', #1472 ) ; +#493 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#494 = EDGE_LOOP ( 'NONE', ( #1008, #1010, #1032, #1070 ) ) ; +#495 = VERTEX_POINT ( 'NONE', #1484 ) ; +#496 = EDGE_CURVE ( 'NONE', #495, #525, #1427, .T. ) ; +#497 = AXIS2_PLACEMENT_3D ( 'NONE', #1119, #1115, #1112 ) ; +#498 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999996400, 2.500000000000000000, -8.999999999999998200 ) ) ; +#499 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#500 = CYLINDRICAL_SURFACE ( 'NONE', #1022, 1.250000000000001100 ) ; +#501 = ORIENTED_EDGE ( 'NONE', *, *, #640, .F. ) ; +#502 = LINE ( 'NONE', #1438, #547 ) ; +#503 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, -2.500000000000000400, 5.000000000000000000 ) ) ; +#504 = ORIENTED_EDGE ( 'NONE', *, *, #529, .F. ) ; +#505 = FACE_OUTER_BOUND ( 'NONE', #1667, .T. ) ; +#506 = VERTEX_POINT ( 'NONE', #1508 ) ; +#507 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000400, 2.500000000000000000, 10.00000000000000000 ) ) ; +#508 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 6.938893903907230300E-016 ) ) ; +#509 = EDGE_CURVE ( 'NONE', #1285, #325, #1405, .T. ) ; +#510 = AXIS2_PLACEMENT_3D ( 'NONE', #1529, #747, #1666 ) ; +#511 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000900, -2.500000000000000000, 3.359770019129910200 ) ) ; +#512 = EDGE_CURVE ( 'NONE', #305, #1483, #1432, .T. ) ; +#513 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.93074902771996500, -16.99999999999999600 ) ) ; +#514 = CARTESIAN_POINT ( 'NONE', ( 1.708171262247572200, -2.499999999999998700, -15.23205080756885900 ) ) ; +#515 = CARTESIAN_POINT ( 'NONE', ( 1.249000902703301100E-014, 2.500000000000000000, -17.99999999999999600 ) ) ; +#516 = CARTESIAN_POINT ( 'NONE', ( -2.180415093947897000, 2.500000000000000000, -14.56777736655967600 ) ) ; +#517 = EDGE_LOOP ( 'NONE', ( #804, #828, #849, #864 ) ) ; +#518 = ORIENTED_EDGE ( 'NONE', *, *, #310, .T. ) ; +#519 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.500000000000000000, 10.00000000000000000 ) ) ; +#520 = EDGE_LOOP ( 'NONE', ( #1601, #1643, #1663, #1678 ) ) ; +#521 = CIRCLE ( 'NONE', #599, 3.249999999999997800 ) ; +#522 = ORIENTED_EDGE ( 'NONE', *, *, #440, .T. ) ; +#523 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, -25.93074902771996500, -17.99999999999999600 ) ) ; +#524 = FACE_OUTER_BOUND ( 'NONE', #549, .T. ) ; +#525 = VERTEX_POINT ( 'NONE', #1337 ) ; +#526 = FACE_OUTER_BOUND ( 'NONE', #241, .T. ) ; +#527 = ORIENTED_EDGE ( 'NONE', *, *, #407, .T. ) ; +#528 = AXIS2_PLACEMENT_3D ( 'NONE', #1167, #34, #71 ) ; +#529 = EDGE_CURVE ( 'NONE', #795, #868, #1386, .T. ) ; +#530 = EDGE_CURVE ( 'NONE', #604, #1269, #1390, .T. ) ; +#531 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#532 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999995600, 2.500000000000000000, -11.24999999999999800 ) ) ; +#533 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#534 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#535 = EDGE_LOOP ( 'NONE', ( #951, #786, #952, #997 ) ) ; +#536 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#537 = ORIENTED_EDGE ( 'NONE', *, *, #530, .T. ) ; +#538 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, -25.93074902771996500, -8.999999999999998200 ) ) ; +#539 = ORIENTED_EDGE ( 'NONE', *, *, #873, .T. ) ; +#540 = VECTOR ( 'NONE', #1177, 1000.000000000000000 ) ; +#541 = CARTESIAN_POINT ( 'NONE', ( 6.181694990624913000, -2.499999999999998700, -0.8333333333333328200 ) ) ; +#542 = EDGE_LOOP ( 'NONE', ( #392, #413, #417, #518 ) ) ; +#543 = EDGE_CURVE ( 'NONE', #647, #1422, #1411, .T. ) ; +#544 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#545 = CYLINDRICAL_SURFACE ( 'NONE', #815, 1.249999999999999600 ) ; +#546 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.499999999999998700, -16.99999999999999600 ) ) ; +#547 = VECTOR ( 'NONE', #1735, 1000.000000000000000 ) ; +#548 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999998700, -2.500999999999999900, 3.359770019129964900 ) ) ; +#549 = EDGE_LOOP ( 'NONE', ( #473, #1231, #1118, #451 ) ) ; +#550 = ADVANCED_FACE ( 'NONE', ( #1366 ), #1334, .T. ) ; +#551 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, 2.500000000000000000, -11.25000000000000000 ) ) ; +#552 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#553 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#554 = EDGE_CURVE ( 'NONE', #1220, #1285, #1343, .T. ) ; +#555 = EDGE_CURVE ( 'NONE', #746, #38, #1349, .T. ) ; +#556 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#557 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#558 = ORIENTED_EDGE ( 'NONE', *, *, #496, .F. ) ; +#559 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#560 = DATE_TIME_ROLE ( 'creation_date' ) ; +#561 = EDGE_LOOP ( 'NONE', ( #191, #318, #353, #366 ) ) ; +#562 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999998700, -2.500000000000000000, 3.359770019129964900 ) ) ; +#563 = ORIENTED_EDGE ( 'NONE', *, *, #1767, .T. ) ; +#564 = AXIS2_PLACEMENT_3D ( 'NONE', #1345, #426, #1225 ) ; +#565 = EDGE_CURVE ( 'NONE', #1363, #127, #1370, .T. ) ; +#566 = LINE ( 'NONE', #927, #540 ) ; +#567 = ORIENTED_EDGE ( 'NONE', *, *, #543, .T. ) ; +#568 = LINE ( 'NONE', #1526, #634 ) ; +#569 = AXIS2_PLACEMENT_3D ( 'NONE', #1189, #1182, #1174 ) ; +#570 = ORIENTED_EDGE ( 'NONE', *, *, #1125, .F. ) ; +#571 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #1475 ) ; +#572 = FACE_OUTER_BOUND ( 'NONE', #1537, .T. ) ; +#573 = DIRECTION ( 'NONE', ( -1.598721155460225400E-014, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#574 = VERTEX_POINT ( 'NONE', #1207 ) ; +#575 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#576 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#577 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#578 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #948 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #339, #984, #1122 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#579 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#580 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884033500E-016, -2.500000000000000000, 7.500000000000000000 ) ) ; +#581 = ORIENTED_EDGE ( 'NONE', *, *, #623, .T. ) ; +#582 = ORIENTED_EDGE ( 'NONE', *, *, #1762, .F. ) ; +#583 = CARTESIAN_POINT ( 'NONE', ( 5.303300858899104900, 2.500000000000000000, 12.80330085889910800 ) ) ; +#584 = VERTEX_POINT ( 'NONE', #1210 ) ; +#585 = CIRCLE ( 'NONE', #287, 2.249999999999998700 ) ; +#586 = ORIENTED_EDGE ( 'NONE', *, *, #818, .F. ) ; +#587 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#588 = EDGE_CURVE ( 'NONE', #1372, #809, #1313, .T. ) ; +#589 = VECTOR ( 'NONE', #1397, 1000.000000000000000 ) ; +#590 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#591 = ORIENTED_EDGE ( 'NONE', *, *, #848, .T. ) ; +#592 = CIRCLE ( 'NONE', #528, 2.500000000000000400 ) ; +#593 = ORIENTED_EDGE ( 'NONE', *, *, #441, .F. ) ; +#594 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#595 = AXIS2_PLACEMENT_3D ( 'NONE', #1103, #1088, #1081 ) ; +#596 = CARTESIAN_POINT ( 'NONE', ( -0.9099025766973238800, 2.500000000000000000, 14.94460054676673400 ) ) ; +#597 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.500000000000000400, 10.00000000000000000 ) ) ; +#598 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999987600, -25.93074902771996500, -16.23861278752582000 ) ) ; +#599 = AXIS2_PLACEMENT_3D ( 'NONE', #1533, #608, #1143 ) ; +#600 = AXIS2_PLACEMENT_3D ( 'NONE', #1554, #1552, #1513 ) ; +#601 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#602 = EDGE_LOOP ( 'NONE', ( #189, #238, #265, #975 ) ) ; +#603 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 15.00000000000000000 ) ) ; +#604 = VERTEX_POINT ( 'NONE', #1184 ) ; +#605 = ORIENTED_EDGE ( 'NONE', *, *, #847, .F. ) ; +#606 = LINE ( 'NONE', #784, #589 ) ; +#607 = ORIENTED_EDGE ( 'NONE', *, *, #1244, .F. ) ; +#608 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#609 = VECTOR ( 'NONE', #203, 1000.000000000000000 ) ; +#610 = ORIENTED_EDGE ( 'NONE', *, *, #1359, .F. ) ; +#611 = LINE ( 'NONE', #1378, #609 ) ; +#612 = ORIENTED_EDGE ( 'NONE', *, *, #1206, .F. ) ; +#613 = ORIENTED_EDGE ( 'NONE', *, *, #543, .F. ) ; +#614 = CIRCLE ( 'NONE', #439, 1.250000000000001100 ) ; +#615 = ORIENTED_EDGE ( 'NONE', *, *, #1445, .T. ) ; +#616 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -2.499999999999998700, -2.250000000000000400 ) ) ; +#617 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#618 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#619 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#620 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -6.938893903907231300E-016 ) ) ; +#621 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.734723475976807100E-016, 0.0000000000000000000 ) ) ; +#622 = AXIS2_PLACEMENT_3D ( 'NONE', #921, #1660, #601 ) ; +#623 = EDGE_CURVE ( 'NONE', #1591, #1478, #1315, .T. ) ; +#624 = PLANE ( 'NONE', #350 ) ; +#625 = VERTEX_POINT ( 'NONE', #1178 ) ; +#626 = AXIS2_PLACEMENT_3D ( 'NONE', #776, #641, #829 ) ; +#627 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000400, 2.499999999999999600, 3.359770019129910200 ) ) ; +#628 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#629 = ORIENTED_EDGE ( 'NONE', *, *, #423, .F. ) ; +#630 = VERTEX_POINT ( 'NONE', #1171 ) ; +#631 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#632 = CYLINDRICAL_SURFACE ( 'NONE', #1713, 7.500000000000000000 ) ; +#633 = ORIENTED_EDGE ( 'NONE', *, *, #646, .T. ) ; +#634 = VECTOR ( 'NONE', #1053, 1000.000000000000000 ) ; +#635 = ORIENTED_EDGE ( 'NONE', *, *, #1215, .F. ) ; +#636 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, -2.499999999999998700, -17.99999999999999600 ) ) ; +#637 = CYLINDRICAL_SURFACE ( 'NONE', #51, 2.249999999999996900 ) ; +#638 = PLANE ( 'NONE', #721 ) ; +#639 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#640 = EDGE_CURVE ( 'NONE', #1591, #1233, #1292, .T. ) ; +#641 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#642 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#643 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.93074902771996500, -16.99999999999999600 ) ) ; +#644 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#645 = EDGE_LOOP ( 'NONE', ( #1052, #1406, #655, #329 ) ) ; +#646 = EDGE_CURVE ( 'NONE', #400, #1473, #1290, .T. ) ; +#647 = VERTEX_POINT ( 'NONE', #1181 ) ; +#648 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#649 = EDGE_LOOP ( 'NONE', ( #1692, #1706, #1718, #1491 ) ) ; +#650 = EDGE_CURVE ( 'NONE', #1351, #242, #1327, .T. ) ; +#651 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 2.499999999999999600, 3.359770019129910200 ) ) ; +#652 = CIRCLE ( 'NONE', #30, 2.250000000000000400 ) ; +#653 = ORIENTED_EDGE ( 'NONE', *, *, #683, .F. ) ; +#654 = CIRCLE ( 'NONE', #150, 4.999999999999999100 ) ; +#655 = ORIENTED_EDGE ( 'NONE', *, *, #987, .F. ) ; +#656 = FACE_OUTER_BOUND ( 'NONE', #1447, .T. ) ; +#657 = ORIENTED_EDGE ( 'NONE', *, *, #554, .F. ) ; +#658 = VERTEX_POINT ( 'NONE', #1126 ) ; +#659 = CARTESIAN_POINT ( 'NONE', ( 1.249000902703301100E-014, -2.499999999999998700, -17.99999999999999600 ) ) ; +#660 = ADVANCED_FACE ( 'NONE', ( #1272 ), #1074, .F. ) ; +#661 = FACE_OUTER_BOUND ( 'NONE', #954, .T. ) ; +#662 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#663 = ORIENTED_EDGE ( 'NONE', *, *, #902, .T. ) ; +#664 = EDGE_CURVE ( 'NONE', #1100, #1079, #1267, .T. ) ; +#665 = AXIS2_PLACEMENT_3D ( 'NONE', #1264, #1298, #1302 ) ; +#666 = ORIENTED_EDGE ( 'NONE', *, *, #987, .T. ) ; +#667 = ORIENTED_EDGE ( 'NONE', *, *, #1605, .F. ) ; +#668 = CARTESIAN_POINT ( 'NONE', ( -1.708171262247574000, 2.500000000000000000, -15.23205080756885900 ) ) ; +#669 = EDGE_CURVE ( 'NONE', #1180, #1766, #1265, .T. ) ; +#670 = ORIENTED_EDGE ( 'NONE', *, *, #467, .T. ) ; +#671 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#672 = VECTOR ( 'NONE', #766, 1000.000000000000000 ) ; +#673 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.734723475976807100E-016, -0.0000000000000000000 ) ) ; +#674 = CIRCLE ( 'NONE', #345, 1.250000000000001100 ) ; +#675 = ORIENTED_EDGE ( 'NONE', *, *, #1639, .F. ) ; +#676 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#677 = CIRCLE ( 'NONE', #181, 3.249999999999997800 ) ; +#678 = ORIENTED_EDGE ( 'NONE', *, *, #1142, .T. ) ; +#679 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, 2.500000000000000000, -2.168404344971008900E-016 ) ) ; +#680 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#681 = EDGE_CURVE ( 'NONE', #1387, #877, #1252, .T. ) ; +#682 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#683 = EDGE_CURVE ( 'NONE', #525, #658, #1254, .T. ) ; +#684 = AXIS2_PLACEMENT_3D ( 'NONE', #1392, #1379, #1377 ) ; +#685 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -25.93074902771996500, -4.499999999999999100 ) ) ; +#686 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#687 = ORIENTED_EDGE ( 'NONE', *, *, #1161, .T. ) ; +#688 = EDGE_LOOP ( 'NONE', ( #1229, #1018, #437, #823 ) ) ; +#689 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -2.499999999999998700, -2.168404344971008900E-016 ) ) ; +#690 = VERTEX_POINT ( 'NONE', #1012 ) ; +#691 = ADVANCED_FACE ( 'NONE', ( #1212 ), #1196, .F. ) ; +#692 = CIRCLE ( 'NONE', #1419, 2.249999999999998700 ) ; +#693 = EDGE_LOOP ( 'NONE', ( #687, #845, #330, #1457 ) ) ; +#694 = CIRCLE ( 'NONE', #1618, 5.000000000000000000 ) ; +#695 = ORIENTED_EDGE ( 'NONE', *, *, #320, .T. ) ; +#696 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#697 = VECTOR ( 'NONE', #879, 1000.000000000000000 ) ; +#698 = ORIENTED_EDGE ( 'NONE', *, *, #840, .F. ) ; +#699 = DIRECTION ( 'NONE', ( 7.709882115452470300E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#700 = ORIENTED_EDGE ( 'NONE', *, *, #249, .T. ) ; +#701 = LINE ( 'NONE', #351, #672 ) ; +#702 = ORIENTED_EDGE ( 'NONE', *, *, #938, .F. ) ; +#703 = CARTESIAN_POINT ( 'NONE', ( 5.303300858899104900, 2.500000000000000000, 7.500000000000000000 ) ) ; +#704 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#705 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999984900, -2.499999999999998700, -17.99999999999999600 ) ) ; +#706 = ADVANCED_FACE ( 'NONE', ( #1216 ), #989, .F. ) ; +#707 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#708 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #742 ) ; +#709 = DIRECTION ( 'NONE', ( 1.734723475976807100E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#710 = ORIENTED_EDGE ( 'NONE', *, *, #1767, .F. ) ; +#711 = ORIENTED_EDGE ( 'NONE', *, *, #840, .T. ) ; +#712 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -15.23205080756885900 ) ) ; +#713 = ORIENTED_EDGE ( 'NONE', *, *, #1462, .F. ) ; +#714 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, -25.93074902771996500, -13.49999999999999600 ) ) ; +#715 = EDGE_CURVE ( 'NONE', #1727, #1512, #1238, .T. ) ; +#716 = VECTOR ( 'NONE', #457, 1000.000000000000000 ) ; +#717 = VERTEX_POINT ( 'NONE', #964 ) ; +#718 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, -2.499999999999998700, -6.749999999999997300 ) ) ; +#719 = LINE ( 'NONE', #469, #716 ) ; +#720 = EDGE_CURVE ( 'NONE', #990, #1233, #1179, .T. ) ; +#721 = AXIS2_PLACEMENT_3D ( 'NONE', #363, #531, #536 ) ; +#722 = ORIENTED_EDGE ( 'NONE', *, *, #1023, .T. ) ; +#723 = VECTOR ( 'NONE', #45, 1000.000000000000000 ) ; +#724 = CARTESIAN_POINT ( 'NONE', ( -5.303300858899107500, -2.500000000000000000, 7.500000000000051500 ) ) ; +#725 = ORIENTED_EDGE ( 'NONE', *, *, #1446, .F. ) ; +#726 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000400, -7.500000000000000000, 5.000000000000000000 ) ) ; +#727 = CARTESIAN_POINT ( 'NONE', ( -5.303300858899107500, -2.501000000000000300, 7.500000000000051500 ) ) ; +#728 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, -25.93074902771996500, -2.250000000000000400 ) ) ; +#729 = ADVANCED_FACE ( 'NONE', ( #1200 ), #1154, .T. ) ; +#730 = EDGE_CURVE ( 'NONE', #746, #1703, #1172, .T. ) ; +#731 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#732 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#733 = ORIENTED_EDGE ( 'NONE', *, *, #554, .T. ) ; +#734 = ORIENTED_EDGE ( 'NONE', *, *, #669, .T. ) ; +#735 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#736 = VERTEX_POINT ( 'NONE', #871 ) ; +#737 = LINE ( 'NONE', #1380, #697 ) ; +#738 = ORIENTED_EDGE ( 'NONE', *, *, #749, .F. ) ; +#739 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#740 = EDGE_CURVE ( 'NONE', #1700, #1385, #1234, .T. ) ; +#741 = CIRCLE ( 'NONE', #1518, 5.000000000000000000 ) ; +#742 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#743 = ORIENTED_EDGE ( 'NONE', *, *, #346, .F. ) ; +#744 = VECTOR ( 'NONE', #65, 1000.000000000000000 ) ; +#745 = ORIENTED_EDGE ( 'NONE', *, *, #1297, .T. ) ; +#746 = VERTEX_POINT ( 'NONE', #866 ) ; +#747 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#748 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#749 = EDGE_CURVE ( 'NONE', #875, #1766, #1157, .T. ) ; +#750 = AXIS2_PLACEMENT_3D ( 'NONE', #462, #452, #450 ) ; +#751 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#752 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, -2.499999999999998700, -10.24999999999999800 ) ) ; +#753 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#754 = AXIS2_PLACEMENT_3D ( 'NONE', #335, #1683, #1145 ) ; +#755 = EDGE_CURVE ( 'NONE', #1621, #381, #1152, .T. ) ; +#756 = EDGE_CURVE ( 'NONE', #1289, #630, #1138, .T. ) ; +#757 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.734723475976807100E-016, 0.0000000000000000000 ) ) ; +#758 = AXIS2_PLACEMENT_3D ( 'NONE', #925, #913, #910 ) ; +#759 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, -2.499999999999998700, -13.49999999999999600 ) ) ; +#760 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, -2.499999999999998700, -13.49999999999999600 ) ) ; +#761 = VERTEX_POINT ( 'NONE', #817 ) ; +#762 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#763 = ORIENTED_EDGE ( 'NONE', *, *, #467, .F. ) ; +#764 = CARTESIAN_POINT ( 'NONE', ( -6.181694990624913000, -25.93074902771996500, -0.8333333333333332600 ) ) ; +#765 = EDGE_LOOP ( 'NONE', ( #605, #1595, #775, #1495 ) ) ; +#766 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#767 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, -2.499999999999998700, -11.24999999999999800 ) ) ; +#768 = CIRCLE ( 'NONE', #248, 1.250000000000001100 ) ; +#769 = LINE ( 'NONE', #42, #723 ) ; +#770 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#771 = ORIENTED_EDGE ( 'NONE', *, *, #1057, .F. ) ; +#772 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#773 = VECTOR ( 'NONE', #78, 1000.000000000000000 ) ; +#774 = EDGE_CURVE ( 'NONE', #169, #1169, #1123, .T. ) ; +#775 = ORIENTED_EDGE ( 'NONE', *, *, #95, .T. ) ; +#776 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.500000000000000000, 10.00000000000000000 ) ) ; +#777 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, -2.499999999999998700, -7.749999999999996400 ) ) ; +#778 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.499999999999998700, -15.23205080756885900 ) ) ; +#779 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#780 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999990200, 2.500000000000000000, -15.74999999999999300 ) ) ; +#781 = EDGE_CURVE ( 'NONE', #242, #84, #1120, .T. ) ; +#782 = VERTEX_POINT ( 'NONE', #788 ) ; +#783 = EDGE_CURVE ( 'NONE', #1719, #305, #1096, .T. ) ; +#784 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999987600, -25.93074902771996500, -16.74999999999999300 ) ) ; +#785 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#786 = ORIENTED_EDGE ( 'NONE', *, *, #1359, .T. ) ; +#787 = ORIENTED_EDGE ( 'NONE', *, *, #565, .F. ) ; +#788 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000900, 2.500000000000000000, -1.250000000000000400 ) ) ; +#789 = LINE ( 'NONE', #103, #773 ) ; +#790 = VERTEX_POINT ( 'NONE', #718 ) ; +#791 = VECTOR ( 'NONE', #70, 1000.000000000000000 ) ; +#792 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -2.499999999999998700, -4.499999999999999100 ) ) ; +#793 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#794 = LINE ( 'NONE', #73, #791 ) ; +#795 = VERTEX_POINT ( 'NONE', #767 ) ; +#796 = AXIS2_PLACEMENT_3D ( 'NONE', #115, #1085, #1205 ) ; +#797 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#798 = ORIENTED_EDGE ( 'NONE', *, *, #496, .T. ) ; +#799 = EDGE_CURVE ( 'NONE', #928, #1097, #1098, .T. ) ; +#800 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, -2.499999999999998700, -4.499999999999999100 ) ) ; +#801 = CARTESIAN_POINT ( 'NONE', ( -0.3033008588991075200, 7.523163845262643300E-032, 9.981533515588910900 ) ) ; +#802 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -25.93074902771996500, -1.250000000000000200 ) ) ; +#803 = EDGE_LOOP ( 'NONE', ( #558, #563, #629, #653 ) ) ; +#804 = ORIENTED_EDGE ( 'NONE', *, *, #1286, .F. ) ; +#805 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#806 = ORIENTED_EDGE ( 'NONE', *, *, #818, .T. ) ; +#807 = VECTOR ( 'NONE', #175, 1000.000000000000000 ) ; +#808 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#809 = VERTEX_POINT ( 'NONE', #703 ) ; +#810 = LINE ( 'NONE', #196, #807 ) ; +#811 = ORIENTED_EDGE ( 'NONE', *, *, #172, .T. ) ; +#812 = ORIENTED_EDGE ( 'NONE', *, *, #826, .F. ) ; +#813 = LINE ( 'NONE', #114, #852 ) ; +#814 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#815 = AXIS2_PLACEMENT_3D ( 'NONE', #1716, #314, #1301 ) ; +#816 = EDGE_CURVE ( 'NONE', #373, #1169, #1137, .T. ) ; +#817 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999985800, -2.499999999999998700, -16.99999999999999600 ) ) ; +#818 = EDGE_CURVE ( 'NONE', #1483, #824, #1102, .T. ) ; +#819 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#820 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999600, -2.500000000000000000, 15.00000000000000000 ) ) ; +#821 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#822 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, 2.500000000000000000, -6.749999999999997300 ) ) ; +#823 = ORIENTED_EDGE ( 'NONE', *, *, #1673, .F. ) ; +#824 = VERTEX_POINT ( 'NONE', #668 ) ; +#825 = CARTESIAN_POINT ( 'NONE', ( 1.708171262247572200, 2.499999999999998700, -14.73205080756885900 ) ) ; +#826 = EDGE_CURVE ( 'NONE', #1572, #1614, #1075, .T. ) ; +#827 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#828 = ORIENTED_EDGE ( 'NONE', *, *, #1080, .T. ) ; +#829 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#830 = CIRCLE ( 'NONE', #1535, 2.249999999999999600 ) ; +#831 = EDGE_LOOP ( 'NONE', ( #1434, #931, #1511, #1632, #633, #1336, #591, #370, #1173, #610, #919, #1005, #798, #1170, #1176, #1030, #36, #424, #1588, #1680, #678 ) ) ; +#832 = CARTESIAN_POINT ( 'NONE', ( -1.708171262247574000, -2.499999999999998700, -15.23205080756885900 ) ) ; +#833 = VECTOR ( 'NONE', #171, 1000.000000000000000 ) ; +#834 = ORIENTED_EDGE ( 'NONE', *, *, #1296, .F. ) ; +#835 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#836 = CIRCLE ( 'NONE', #1629, 0.5000000000000004400 ) ; +#837 = ORIENTED_EDGE ( 'NONE', *, *, #756, .T. ) ; +#838 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#839 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#840 = EDGE_CURVE ( 'NONE', #1248, #1512, #1058, .T. ) ; +#841 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999996400, 2.500000000000000000, -8.999999999999998200 ) ) ; +#842 = EDGE_CURVE ( 'NONE', #422, #525, #1054, .T. ) ; +#843 = AXIS2_PLACEMENT_3D ( 'NONE', #432, #429, #427 ) ; +#844 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, 2.500000000000000000, 10.00000000000000000 ) ) ; +#845 = ORIENTED_EDGE ( 'NONE', *, *, #755, .T. ) ; +#846 = AXIS2_PLACEMENT_3D ( 'NONE', #1388, #465, #757 ) ; +#847 = EDGE_CURVE ( 'NONE', #193, #1498, #1082, .T. ) ; +#848 = EDGE_CURVE ( 'NONE', #220, #647, #1020, .T. ) ; +#849 = ORIENTED_EDGE ( 'NONE', *, *, #799, .F. ) ; +#850 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.734723475976807100E-016, 0.0000000000000000000 ) ) ; +#851 = ORIENTED_EDGE ( 'NONE', *, *, #376, .F. ) ; +#852 = VECTOR ( 'NONE', #98, 1000.000000000000000 ) ; +#853 = ORIENTED_EDGE ( 'NONE', *, *, #1707, .T. ) ; +#854 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#855 = VECTOR ( 'NONE', #262, 1000.000000000000000 ) ; +#856 = EDGE_LOOP ( 'NONE', ( #57, #147, #977, #1393 ) ) ; +#857 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#858 = VERTEX_POINT ( 'NONE', #603 ) ; +#859 = LINE ( 'NONE', #83, #744 ) ; +#860 = ORIENTED_EDGE ( 'NONE', *, *, #755, .F. ) ; +#861 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#862 = CARTESIAN_POINT ( 'NONE', ( -0.3033008588991079100, 2.500000000000000000, 9.981533515588910900 ) ) ; +#863 = EDGE_CURVE ( 'NONE', #1326, #736, #1009, .T. ) ; +#864 = ORIENTED_EDGE ( 'NONE', *, *, #949, .T. ) ; +#865 = ORIENTED_EDGE ( 'NONE', *, *, #816, .F. ) ; +#866 = CARTESIAN_POINT ( 'NONE', ( -5.809016994374948300, -2.500000000000000000, 0.0000000000000000000 ) ) ; +#867 = EDGE_CURVE ( 'NONE', #809, #1285, #1015, .T. ) ; +#868 = VERTEX_POINT ( 'NONE', #551 ) ; +#869 = LINE ( 'NONE', #224, #833 ) ; +#870 = VERTEX_POINT ( 'NONE', #541 ) ; +#871 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999987600, 2.500000000000000000, -16.23861278752582000 ) ) ; +#872 = CIRCLE ( 'NONE', #1437, 3.249999999999998700 ) ; +#873 = EDGE_CURVE ( 'NONE', #1055, #1614, #976, .T. ) ; +#874 = AXIS2_PLACEMENT_3D ( 'NONE', #940, #924, #922 ) ; +#875 = VERTEX_POINT ( 'NONE', #532 ) ; +#876 = LINE ( 'NONE', #275, #855 ) ; +#877 = VERTEX_POINT ( 'NONE', #511 ) ; +#878 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#879 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#880 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#881 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#882 = AXIS2_PLACEMENT_3D ( 'NONE', #1464, #680, #960 ) ; +#883 = AXIS2_PLACEMENT_3D ( 'NONE', #1599, #1596, #1734 ) ; +#884 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, 2.500000000000000000, -2.250000000000000400 ) ) ; +#885 = CARTESIAN_POINT ( 'NONE', ( -7.499999999999999100, -2.500000000000000000, 0.0000000000000000000 ) ) ; +#886 = EDGE_LOOP ( 'NONE', ( #1400, #456, #1063, #435 ) ) ; +#887 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000400, -2.500000000000000400, 10.00000000000000000 ) ) ; +#888 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#889 = ORIENTED_EDGE ( 'NONE', *, *, #1557, .T. ) ; +#890 = ORIENTED_EDGE ( 'NONE', *, *, #781, .F. ) ; +#891 = CIRCLE ( 'NONE', #1353, 1.249999999999999600 ) ; +#892 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000400, -2.501000000000000800, 3.359770019129910200 ) ) ; +#893 = VECTOR ( 'NONE', #297, 1000.000000000000000 ) ; +#894 = ORIENTED_EDGE ( 'NONE', *, *, #270, .T. ) ; +#895 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#896 = CIRCLE ( 'NONE', #1262, 1.250000000000001100 ) ; +#897 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#898 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#899 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#900 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#901 = AXIS2_PLACEMENT_3D ( 'NONE', #1214, #411, #1338 ) ; +#902 = EDGE_CURVE ( 'NONE', #630, #782, #959, .T. ) ; +#903 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, -2.499999999999998700, -13.49999999999999600 ) ) ; +#904 = AXIS2_PLACEMENT_3D ( 'NONE', #580, #575, #573 ) ; +#905 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#906 = ORIENTED_EDGE ( 'NONE', *, *, #1244, .T. ) ; +#907 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#908 = EDGE_LOOP ( 'NONE', ( #787, #1755, #961, #860, #453 ) ) ; +#909 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.500000000000000000, 5.000000000000000000 ) ) ; +#910 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#911 = EDGE_LOOP ( 'NONE', ( #725, #734, #738, #763 ) ) ; +#912 = CARTESIAN_POINT ( 'NONE', ( 0.3033008588991053000, -2.500000000000000000, 9.981533515588910900 ) ) ; +#913 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#914 = CIRCLE ( 'NONE', #1104, 7.500000000000000000 ) ; +#915 = CIRCLE ( 'NONE', #1186, 7.500000000000000000 ) ; +#916 = ORIENTED_EDGE ( 'NONE', *, *, #740, .T. ) ; +#917 = VECTOR ( 'NONE', #420, 1000.000000000000000 ) ; +#918 = ORIENTED_EDGE ( 'NONE', *, *, #1740, .T. ) ; +#919 = ORIENTED_EDGE ( 'NONE', *, *, #1446, .T. ) ; +#920 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#921 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999987600, -25.93074902771996500, 0.0000000000000000000 ) ) ; +#922 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#923 = EDGE_CURVE ( 'NONE', #795, #604, #994, .T. ) ; +#924 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#925 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, -2.499999999999998700, -4.499999999999999100 ) ) ; +#926 = AXIS2_PLACEMENT_3D ( 'NONE', #388, #379, #371 ) ; +#927 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, 2.500000000000000000, 15.00000000000000000 ) ) ; +#928 = VERTEX_POINT ( 'NONE', #485 ) ; +#929 = ORIENTED_EDGE ( 'NONE', *, *, #226, .T. ) ; +#930 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#931 = ORIENTED_EDGE ( 'NONE', *, *, #1276, .T. ) ; +#932 = CIRCLE ( 'NONE', #1014, 0.5000000000000000000 ) ; +#933 = VERTEX_POINT ( 'NONE', #503 ) ; +#934 = PLANE ( 'NONE', #937 ) ; +#935 = LINE ( 'NONE', #391, #893 ) ; +#936 = ORIENTED_EDGE ( 'NONE', *, *, #472, .F. ) ; +#937 = AXIS2_PLACEMENT_3D ( 'NONE', #513, #1586, #662 ) ; +#938 = EDGE_CURVE ( 'NONE', #1719, #84, #1039, .T. ) ; +#939 = EDGE_CURVE ( 'NONE', #858, #393, #955, .T. ) ; +#940 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, 2.500000000000000000, -8.597800040494614000E-016 ) ) ; +#941 = VECTOR ( 'NONE', #470, 1000.000000000000000 ) ; +#942 = EDGE_LOOP ( 'NONE', ( #1209, #1249, #1273, #1283 ) ) ; +#943 = AXIS2_PLACEMENT_3D ( 'NONE', #1168, #1144, #1165 ) ; +#944 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999999100, 2.500000000000000000, -6.749999999999997300 ) ) ; +#945 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -25.93074902771996500, -2.168404344971008900E-016 ) ) ; +#946 = PLANE ( 'NONE', #986 ) ; +#947 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, -25.93074902771996500, -10.24999999999999800 ) ) ; +#948 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #339, 'distance_accuracy_value', 'NONE'); +#949 = EDGE_CURVE ( 'NONE', #928, #1323, #978, .T. ) ; +#950 = EDGE_LOOP ( 'NONE', ( #582, #482, #1293, #319, #1146, #1040, #834, #593, #1774, #586, #929, #1237, #1291, #1493 ) ) ; +#951 = ORIENTED_EDGE ( 'NONE', *, *, #669, .F. ) ; +#952 = ORIENTED_EDGE ( 'NONE', *, *, #1286, .T. ) ; +#953 = LINE ( 'NONE', #445, #917 ) ; +#954 = EDGE_LOOP ( 'NONE', ( #1623, #1061, #86, #1594 ) ) ; +#955 = LINE ( 'NONE', #466, #941 ) ; +#956 = ORIENTED_EDGE ( 'NONE', *, *, #1142, .F. ) ; +#957 = CARTESIAN_POINT ( 'NONE', ( -5.303300858899107500, -2.500000000000000000, 7.500000000000051500 ) ) ; +#958 = EDGE_CURVE ( 'NONE', #1614, #1217, #953, .T. ) ; +#959 = LINE ( 'NONE', #488, #992 ) ; +#960 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#961 = ORIENTED_EDGE ( 'NONE', *, *, #1358, .F. ) ; +#962 = EDGE_CURVE ( 'NONE', #1121, #506, #932, .T. ) ; +#963 = AXIS2_PLACEMENT_3D ( 'NONE', #1107, #1072, #1069 ) ; +#964 = CARTESIAN_POINT ( 'NONE', ( -6.181694990624912100, -2.499999999999998700, -0.8333333333333334800 ) ) ; +#965 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#966 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999996400, -25.93074902771996500, -8.999999999999998200 ) ) ; +#967 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#968 = AXIS2_PLACEMENT_3D ( 'NONE', #63, #1356, #772 ) ; +#969 = EDGE_LOOP ( 'NONE', ( #476, #395, #1114, #811 ) ) ; +#970 = EDGE_LOOP ( 'NONE', ( #1644, #1731, #1149, #358, #1573 ) ) ; +#971 = AXIS2_PLACEMENT_3D ( 'NONE', #1748, #1757, #1607 ) ; +#972 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#973 = ORIENTED_EDGE ( 'NONE', *, *, #1740, .F. ) ; +#974 = VECTOR ( 'NONE', #534, 1000.000000000000000 ) ; +#975 = ORIENTED_EDGE ( 'NONE', *, *, #588, .T. ) ; +#976 = LINE ( 'NONE', #546, #974 ) ; +#977 = ORIENTED_EDGE ( 'NONE', *, *, #1227, .F. ) ; +#978 = CIRCLE ( 'NONE', #926, 2.249999999999999600 ) ; +#979 = VERTEX_POINT ( 'NONE', #367 ) ; +#980 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, -2.500000000000000400, 10.00000000000000000 ) ) ; +#981 = CARTESIAN_POINT ( 'NONE', ( -5.303300858899107500, -2.501000000000000300, 7.500000000000051500 ) ) ; +#982 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, -25.93074902771996500, -8.597800040494614000E-016 ) ) ; +#983 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#984 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#985 = EDGE_LOOP ( 'NONE', ( #570, #615, #1310, #1253 ) ) ; +#986 = AXIS2_PLACEMENT_3D ( 'NONE', #402, #673, #1600 ) ; +#987 = EDGE_CURVE ( 'NONE', #858, #1220, #914, .T. ) ; +#988 = ORIENTED_EDGE ( 'NONE', *, *, #1374, .T. ) ; +#989 = PLANE ( 'NONE', #1300 ) ; +#990 = VERTEX_POINT ( 'NONE', #360 ) ; +#991 = AXIS2_PLACEMENT_3D ( 'NONE', #408, #414, #404 ) ; +#992 = VECTOR ( 'NONE', #493, 1000.000000000000000 ) ; +#993 = ORIENTED_EDGE ( 'NONE', *, *, #774, .T. ) ; +#994 = CIRCLE ( 'NONE', #750, 2.249999999999996900 ) ; +#995 = VERTEX_POINT ( 'NONE', #332 ) ; +#996 = VECTOR ( 'NONE', #552, 1000.000000000000000 ) ; +#997 = ORIENTED_EDGE ( 'NONE', *, *, #1619, .T. ) ; +#998 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#999 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1000 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1001 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#1002 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1003 = EDGE_LOOP ( 'NONE', ( #125, #1635, #1408, #1384 ) ) ; +#1004 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1005 = ORIENTED_EDGE ( 'NONE', *, *, #1605, .T. ) ; +#1006 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1007 = EDGE_CURVE ( 'NONE', #1498, #1363, #935, .T. ) ; +#1008 = ORIENTED_EDGE ( 'NONE', *, *, #1707, .F. ) ; +#1009 = LINE ( 'NONE', #598, #996 ) ; +#1010 = ORIENTED_EDGE ( 'NONE', *, *, #1241, .T. ) ; +#1011 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1012 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, 2.500000000000000000, -15.74999999999999300 ) ) ; +#1013 = VECTOR ( 'NONE', #579, 1000.000000000000000 ) ; +#1014 = AXIS2_PLACEMENT_3D ( 'NONE', #343, #337, #334 ) ; +#1015 = LINE ( 'NONE', #583, #1013 ) ; +#1016 = VERTEX_POINT ( 'NONE', #294 ) ; +#1017 = CARTESIAN_POINT ( 'NONE', ( -7.499999999999985800, -25.93074902771996500, -18.00000000000000400 ) ) ; +#1018 = ORIENTED_EDGE ( 'NONE', *, *, #565, .T. ) ; +#1019 = DIRECTION ( 'NONE', ( 1.734723475976807100E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1020 = CIRCLE ( 'NONE', #1679, 4.999999999999999100 ) ; +#1021 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 2.500000000000000000, 3.359770019129911100 ) ) ; +#1022 = AXIS2_PLACEMENT_3D ( 'NONE', #1728, #99, #1067 ) ; +#1023 = EDGE_CURVE ( 'NONE', #1385, #858, #915, .T. ) ; +#1024 = EDGE_CURVE ( 'NONE', #1289, #990, #896, .T. ) ; +#1025 = AXIS2_PLACEMENT_3D ( 'NONE', #1333, #1412, #1360 ) ; +#1026 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1027 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1028 = DESIGN_CONTEXT ( 'detailed design', #742, 'design' ) ; +#1029 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.499999999999998700, -16.99999999999999600 ) ) ; +#1030 = ORIENTED_EDGE ( 'NONE', *, *, #923, .F. ) ; +#1031 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, -25.93074902771996500, -4.499999999999999100 ) ) ; +#1032 = ORIENTED_EDGE ( 'NONE', *, *, #1044, .F. ) ; +#1033 = EDGE_LOOP ( 'NONE', ( #918, #1603, #1139, #695, #1037, #1616, #1211, #431, #1375, #1263, #1481, #890, #261, #853 ) ) ; +#1034 = DIRECTION ( 'NONE', ( 1.734723475976807100E-016, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1035 = VECTOR ( 'NONE', #620, 1000.000000000000000 ) ; +#1036 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1037 = ORIENTED_EDGE ( 'NONE', *, *, #1038, .F. ) ; +#1038 = EDGE_CURVE ( 'NONE', #630, #870, #891, .T. ) ; +#1039 = CIRCLE ( 'NONE', #843, 0.5000000000000004400 ) ; +#1040 = ORIENTED_EDGE ( 'NONE', *, *, #1044, .T. ) ; +#1041 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999996400, -2.499999999999998700, -7.749999999999997300 ) ) ; +#1042 = VECTOR ( 'NONE', #682, 1000.000000000000000 ) ; +#1043 = CARTESIAN_POINT ( 'NONE', ( 5.809016994374948300, -25.93074902771996500, -0.5000000000000000000 ) ) ; +#1044 = EDGE_CURVE ( 'NONE', #1169, #492, #872, .T. ) ; +#1045 = EDGE_CURVE ( 'NONE', #1016, #736, #876, .T. ) ; +#1046 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1047 = AXIS2_PLACEMENT_3D ( 'NONE', #862, #861, #854 ) ; +#1048 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999988500, -2.499999999999998700, -16.23861278752582000 ) ) ; +#1049 = ORIENTED_EDGE ( 'NONE', *, *, #23, .F. ) ; +#1050 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1051 = VERTEX_POINT ( 'NONE', #201 ) ; +#1052 = ORIENTED_EDGE ( 'NONE', *, *, #288, .F. ) ; +#1053 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1054 = LINE ( 'NONE', #659, #1035 ) ; +#1055 = VERTEX_POINT ( 'NONE', #197 ) ; +#1056 = AXIS2_PLACEMENT_3D ( 'NONE', #689, #967, #136 ) ; +#1057 = EDGE_CURVE ( 'NONE', #1473, #1700, #869, .T. ) ; +#1058 = LINE ( 'NONE', #728, #1042 ) ; +#1059 = ORIENTED_EDGE ( 'NONE', *, *, #250, .T. ) ; +#1060 = VECTOR ( 'NONE', #707, 1000.000000000000000 ) ; +#1061 = ORIENTED_EDGE ( 'NONE', *, *, #347, .T. ) ; +#1062 = AXIS2_PLACEMENT_3D ( 'NONE', #1640, #1759, #779 ) ; +#1063 = ORIENTED_EDGE ( 'NONE', *, *, #1161, .F. ) ; +#1064 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1065 = DIRECTION ( 'NONE', ( 1.734723475976807100E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1066 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.734723475976807100E-016, 0.0000000000000000000 ) ) ; +#1067 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1068 = CARTESIAN_POINT ( 'NONE', ( 5.999999999999989300, -25.93074902771996500, -16.99999999999999600 ) ) ; +#1069 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1070 = ORIENTED_EDGE ( 'NONE', *, *, #774, .F. ) ; +#1071 = EDGE_LOOP ( 'NONE', ( #40, #463, #460, #1257 ) ) ; +#1072 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1073 = EDGE_LOOP ( 'NONE', ( #1443, #700, #1670, #1456 ) ) ; +#1074 = PLANE ( 'NONE', #963 ) ; +#1075 = CIRCLE ( 'NONE', #174, 1.250000000000001100 ) ; +#1076 = ORIENTED_EDGE ( 'NONE', *, *, #440, .F. ) ; +#1077 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1078 = VECTOR ( 'NONE', #709, 1000.000000000000000 ) ; +#1079 = VERTEX_POINT ( 'NONE', #178 ) ; +#1080 = EDGE_CURVE ( 'NONE', #283, #1097, #830, .T. ) ; +#1081 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1082 = CIRCLE ( 'NONE', #274, 2.500000000000000400 ) ; +#1083 = AXIS2_PLACEMENT_3D ( 'NONE', #519, #483, #446 ) ; +#1084 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.500000000000000400, 12.50000000000000000 ) ) ; +#1085 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1086 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1087 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#1088 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1089 = ORIENTED_EDGE ( 'NONE', *, *, #1462, .T. ) ; +#1090 = PLANE ( 'NONE', #1553 ) ; +#1091 = EDGE_LOOP ( 'NONE', ( #666, #733, #1124, #1133, #1191, #1202, #906, #1239, #1305, #1344, #1561, #1691, #1347, #1656, #1723, #1268, #1630, #1235, #17, #916, #722 ) ) ; +#1092 = EDGE_LOOP ( 'NONE', ( #286, #62, #1391, #355 ) ) ; +#1093 = VECTOR ( 'NONE', #731, 1000.000000000000000 ) ; +#1094 = ORIENTED_EDGE ( 'NONE', *, *, #1241, .F. ) ; +#1095 = MECHANICAL_CONTEXT ( 'NONE', #1475, 'mechanical' ) ; +#1096 = LINE ( 'NONE', #778, #1093 ) ; +#1097 = VERTEX_POINT ( 'NONE', #161 ) ; +#1098 = LINE ( 'NONE', #748, #1078 ) ; +#1099 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, -25.93074902771996500, -15.74999999999999300 ) ) ; +#1100 = VERTEX_POINT ( 'NONE', #153 ) ; +#1101 = EDGE_CURVE ( 'NONE', #877, #584, #810, .T. ) ; +#1102 = LINE ( 'NONE', #712, #1060 ) ; +#1103 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999996400, -2.499999999999998700, -8.999999999999998200 ) ) ; +#1104 = AXIS2_PLACEMENT_3D ( 'NONE', #316, #315, #312 ) ; +#1105 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1106 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1107 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000400, -7.500000000000000000, 10.00000000000000000 ) ) ; +#1108 = AXIS2_PLACEMENT_3D ( 'NONE', #1325, #533, #1461 ) ; +#1109 = EDGE_CURVE ( 'NONE', #382, #349, #813, .T. ) ; +#1110 = EDGE_CURVE ( 'NONE', #1478, #305, #836, .T. ) ; +#1111 = ORIENTED_EDGE ( 'NONE', *, *, #1130, .T. ) ; +#1112 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1113 = AXIS2_PLACEMENT_3D ( 'NONE', #1299, #1320, #1278 ) ; +#1114 = ORIENTED_EDGE ( 'NONE', *, *, #1101, .T. ) ; +#1115 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1116 = ORIENTED_EDGE ( 'NONE', *, *, #407, .F. ) ; +#1117 = VECTOR ( 'NONE', #785, 1000.000000000000000 ) ; +#1118 = ORIENTED_EDGE ( 'NONE', *, *, #369, .F. ) ; +#1119 = CARTESIAN_POINT ( 'NONE', ( -0.3033008588991070700, -2.500000000000000000, 9.981533515588910900 ) ) ; +#1120 = CIRCLE ( 'NONE', #1768, 3.249999999999997800 ) ; +#1121 = VERTEX_POINT ( 'NONE', #1489 ) ; +#1122 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#1123 = LINE ( 'NONE', #802, #1117 ) ; +#1124 = ORIENTED_EDGE ( 'NONE', *, *, #867, .F. ) ; +#1125 = EDGE_CURVE ( 'NONE', #506, #38, #789, .T. ) ; +#1126 = CARTESIAN_POINT ( 'NONE', ( -7.499999999999985800, 2.500000000000000000, -18.00000000000000400 ) ) ; +#1127 = EDGE_CURVE ( 'NONE', #1079, #285, #794, .T. ) ; +#1128 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1129 = ORIENTED_EDGE ( 'NONE', *, *, #650, .T. ) ; +#1130 = EDGE_CURVE ( 'NONE', #870, #1121, #859, .T. ) ; +#1131 = ORIENTED_EDGE ( 'NONE', *, *, #52, .T. ) ; +#1132 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1133 = ORIENTED_EDGE ( 'NONE', *, *, #1215, .T. ) ; +#1134 = VECTOR ( 'NONE', #888, 1000.000000000000000 ) ; +#1135 = ORIENTED_EDGE ( 'NONE', *, *, #1296, .T. ) ; +#1136 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, 2.500000000000000000, -13.49999999999999600 ) ) ; +#1137 = CIRCLE ( 'NONE', #88, 1.249999999999999800 ) ; +#1138 = CIRCLE ( 'NONE', #1662, 3.249999999999998700 ) ; +#1139 = ORIENTED_EDGE ( 'NONE', *, *, #730, .T. ) ; +#1140 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, 2.500000000000000000, -8.999999999999998200 ) ) ; +#1141 = VERTEX_POINT ( 'NONE', #1492 ) ; +#1142 = EDGE_CURVE ( 'NONE', #877, #1372, #741, .T. ) ; +#1143 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1144 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1145 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1146 = ORIENTED_EDGE ( 'NONE', *, *, #816, .T. ) ; +#1147 = VERTEX_POINT ( 'NONE', #44 ) ; +#1148 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1149 = ORIENTED_EDGE ( 'NONE', *, *, #847, .T. ) ; +#1150 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1151 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999999100, -25.93074902771996500, -6.749999999999997300 ) ) ; +#1152 = LINE ( 'NONE', #844, #1134 ) ; +#1153 = ORIENTED_EDGE ( 'NONE', *, *, #781, .T. ) ; +#1154 = CYLINDRICAL_SURFACE ( 'NONE', #1477, 2.249999999999999600 ) ; +#1155 = ORIENTED_EDGE ( 'NONE', *, *, #130, .F. ) ; +#1156 = ORIENTED_EDGE ( 'NONE', *, *, #529, .T. ) ; +#1157 = CIRCLE ( 'NONE', #1383, 2.250000000000000400 ) ; +#1158 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1159 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, -25.93074902771996500, -13.49999999999999600 ) ) ; +#1160 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, 2.500000000000000000, -4.499999999999999100 ) ) ; +#1161 = EDGE_CURVE ( 'NONE', #933, #1621, #769, .T. ) ; +#1162 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1163 = CARTESIAN_POINT ( 'NONE', ( -5.303300858899107500, 2.500000000000000000, 7.500000000000051500 ) ) ; +#1164 = PLANE ( 'NONE', #622 ) ; +#1165 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1166 = ORIENTED_EDGE ( 'NONE', *, *, #346, .T. ) ; +#1167 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 10.00000000000000000 ) ) ; +#1168 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, -25.93074902771996500, -13.49999999999999600 ) ) ; +#1169 = VERTEX_POINT ( 'NONE', #15 ) ; +#1170 = ORIENTED_EDGE ( 'NONE', *, *, #842, .F. ) ; +#1171 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, -2.499999999999998700, -1.250000000000000200 ) ) ; +#1172 = LINE ( 'NONE', #885, #1195 ) ; +#1173 = ORIENTED_EDGE ( 'NONE', *, *, #1080, .F. ) ; +#1174 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1175 = VECTOR ( 'NONE', #907, 1000.000000000000000 ) ; +#1176 = ORIENTED_EDGE ( 'NONE', *, *, #81, .F. ) ; +#1177 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1178 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999984000, 2.500000000000000000, -18.00000000000000000 ) ) ; +#1179 = LINE ( 'NONE', #947, #1175 ) ; +#1180 = VERTEX_POINT ( 'NONE', #72 ) ; +#1181 = CARTESIAN_POINT ( 'NONE', ( -7.499999999999999100, -2.500000000000000000, 3.359770019129964900 ) ) ; +#1182 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1183 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1184 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999990200, -2.499999999999998700, -15.74999999999999300 ) ) ; +#1185 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1186 = AXIS2_PLACEMENT_3D ( 'NONE', #272, #269, #268 ) ; +#1187 = CARTESIAN_POINT ( 'NONE', ( 2.180415093947894300, -25.93074902771996500, -14.56777736655967600 ) ) ; +#1188 = VERTEX_POINT ( 'NONE', #29 ) ; +#1189 = CARTESIAN_POINT ( 'NONE', ( -5.809016994374948300, 2.499999999999998700, -0.5000000000000000000 ) ) ; +#1190 = ORIENTED_EDGE ( 'NONE', *, *, #441, .T. ) ; +#1191 = ORIENTED_EDGE ( 'NONE', *, *, #1394, .T. ) ; +#1192 = AXIS2_PLACEMENT_3D ( 'NONE', #714, #577, #1550 ) ; +#1193 = EDGE_CURVE ( 'NONE', #382, #761, #719, .T. ) ; +#1194 = EDGE_CURVE ( 'NONE', #1572, #1051, #737, .T. ) ; +#1195 = VECTOR ( 'NONE', #881, 1000.000000000000000 ) ; +#1196 = CYLINDRICAL_SURFACE ( 'NONE', #1221, 2.249999999999998700 ) ; +#1197 = ORIENTED_EDGE ( 'NONE', *, *, #52, .F. ) ; +#1198 = AXIS2_PLACEMENT_3D ( 'NONE', #705, #696, #686 ) ; +#1199 = ORIENTED_EDGE ( 'NONE', *, *, #848, .F. ) ; +#1200 = FACE_OUTER_BOUND ( 'NONE', #1428, .T. ) ; +#1201 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999985800, 2.500000000000000000, -0.0000000000000000000 ) ) ; +#1202 = ORIENTED_EDGE ( 'NONE', *, *, #715, .T. ) ; +#1203 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1204 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -2.499999999999998700, -1.250000000000000000 ) ) ; +#1205 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1206 = EDGE_CURVE ( 'NONE', #1233, #574, #768, .T. ) ; +#1207 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999997300, 2.500000000000000000, -7.749999999999997300 ) ) ; +#1208 = EDGE_LOOP ( 'NONE', ( #1155, #567, #988, #1764 ) ) ; +#1209 = ORIENTED_EDGE ( 'NONE', *, *, #1109, .F. ) ; +#1210 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000900, -2.500000000000000000, 0.0000000000000000000 ) ) ; +#1211 = ORIENTED_EDGE ( 'NONE', *, *, #1024, .T. ) ; +#1212 = FACE_OUTER_BOUND ( 'NONE', #1341, .T. ) ; +#1213 = ORIENTED_EDGE ( 'NONE', *, *, #33, .F. ) ; +#1214 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -2.499999999999998700, -4.499999999999999100 ) ) ; +#1215 = EDGE_CURVE ( 'NONE', #809, #1387, #694, .T. ) ; +#1216 = FACE_OUTER_BOUND ( 'NONE', #368, .T. ) ; +#1217 = VERTEX_POINT ( 'NONE', #321 ) ; +#1218 = CARTESIAN_POINT ( 'NONE', ( 5.303300858899104900, -2.501000000000000300, 7.500000000000000000 ) ) ; +#1219 = VECTOR ( 'NONE', #1006, 1000.000000000000000 ) ; +#1220 = VERTEX_POINT ( 'NONE', #1555 ) ; +#1221 = AXIS2_PLACEMENT_3D ( 'NONE', #1031, #1000, #1004 ) ; +#1222 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#1223 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000400, 2.500000000000000000, 10.00000000000000000 ) ) ; +#1224 = CARTESIAN_POINT ( 'NONE', ( 5.303300858899104900, -2.500000000000000000, 12.80330085889910800 ) ) ; +#1225 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1226 = AXIS2_PLACEMENT_3D ( 'NONE', #113, #1077, #254 ) ; +#1227 = EDGE_CURVE ( 'NONE', #1217, #1051, #674, .T. ) ; +#1228 = AXIS2_PLACEMENT_3D ( 'NONE', #1448, #1440, #1436 ) ; +#1229 = ORIENTED_EDGE ( 'NONE', *, *, #1007, .T. ) ; +#1230 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1231 = ORIENTED_EDGE ( 'NONE', *, *, #23, .T. ) ; +#1232 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1233 = VERTEX_POINT ( 'NONE', #1281 ) ; +#1234 = CIRCLE ( 'NONE', #1047, 5.000000000000000000 ) ; +#1235 = ORIENTED_EDGE ( 'NONE', *, *, #472, .T. ) ; +#1236 = VECTOR ( 'NONE', #1034, 1000.000000000000000 ) ; +#1237 = ORIENTED_EDGE ( 'NONE', *, *, #640, .T. ) ; +#1238 = CIRCLE ( 'NONE', #874, 2.249999999999999600 ) ; +#1239 = ORIENTED_EDGE ( 'NONE', *, *, #1297, .F. ) ; +#1240 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1241 = EDGE_CURVE ( 'NONE', #1351, #492, #701, .T. ) ; +#1242 = CARTESIAN_POINT ( 'NONE', ( 0.3033008588991044600, 2.500000000000000000, 9.981533515588910900 ) ) ; +#1243 = CARTESIAN_POINT ( 'NONE', ( -5.999999999999991100, -2.499999999999998700, -16.99999999999999600 ) ) ; +#1244 = EDGE_CURVE ( 'NONE', #1512, #1695, #692, .T. ) ; +#1245 = ORIENTED_EDGE ( 'NONE', *, *, #1024, .F. ) ; +#1246 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 2.500000000000000000, 15.00000000000000000 ) ) ; +#1247 = AXIS2_PLACEMENT_3D ( 'NONE', #405, #428, #389 ) ; +#1248 = VERTEX_POINT ( 'NONE', #1401 ) ; +#1249 = ORIENTED_EDGE ( 'NONE', *, *, #1193, .T. ) ; +#1250 = VECTOR ( 'NONE', #1050, 1000.000000000000000 ) ; +#1251 = ORIENTED_EDGE ( 'NONE', *, *, #207, .F. ) ; +#1252 = LINE ( 'NONE', #1021, #1236 ) ; +#1253 = ORIENTED_EDGE ( 'NONE', *, *, #555, .T. ) ; +#1254 = LINE ( 'NONE', #1017, #1219 ) ; +#1255 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1256 = ADVANCED_FACE ( 'NONE', ( #656 ), #637, .F. ) ; +#1257 = ORIENTED_EDGE ( 'NONE', *, *, #1661, .T. ) ; +#1258 = ADVANCED_FACE ( 'NONE', ( #661 ), #632, .T. ) ; +#1259 = ORIENTED_EDGE ( 'NONE', *, *, #1277, .F. ) ; +#1260 = CARTESIAN_POINT ( 'NONE', ( 1.708171262247572200, 2.500000000000000000, -15.23205080756885900 ) ) ; +#1261 = ORIENTED_EDGE ( 'NONE', *, *, #1658, .T. ) ; +#1262 = AXIS2_PLACEMENT_3D ( 'NONE', #253, #251, #246 ) ; +#1263 = ORIENTED_EDGE ( 'NONE', *, *, #783, .F. ) ; +#1264 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -25.93074902771996500, -4.499999999999999100 ) ) ; +#1265 = LINE ( 'NONE', #1151, #1250 ) ; +#1266 = ORIENTED_EDGE ( 'NONE', *, *, #863, .T. ) ; +#1267 = LINE ( 'NONE', #1068, #1288 ) ; +#1268 = ORIENTED_EDGE ( 'NONE', *, *, #949, .F. ) ; +#1269 = VERTEX_POINT ( 'NONE', #780 ) ; +#1270 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1271 = CARTESIAN_POINT ( 'NONE', ( -5.809016994374948300, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1272 = FACE_OUTER_BOUND ( 'NONE', #688, .T. ) ; +#1273 = ORIENTED_EDGE ( 'NONE', *, *, #387, .T. ) ; +#1274 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1275 = AXIS2_PLACEMENT_3D ( 'NONE', #1693, #1162, #486 ) ; +#1276 = EDGE_CURVE ( 'NONE', #325, #1147, #654, .T. ) ; +#1277 = EDGE_CURVE ( 'NONE', #990, #1478, #677, .T. ) ; +#1278 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1279 = AXIS2_PLACEMENT_3D ( 'NONE', #1043, #998, #1046 ) ; +#1280 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1281 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, 2.500000000000000000, -10.24999999999999800 ) ) ; +#1282 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1283 = ORIENTED_EDGE ( 'NONE', *, *, #1651, .T. ) ; +#1284 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1285 = VERTEX_POINT ( 'NONE', #490 ) ; +#1286 = EDGE_CURVE ( 'NONE', #283, #1323, #611, .T. ) ; +#1287 = ORIENTED_EDGE ( 'NONE', *, *, #387, .F. ) ; +#1288 = VECTOR ( 'NONE', #1105, 1000.000000000000000 ) ; +#1289 = VERTEX_POINT ( 'NONE', #777 ) ; +#1290 = CIRCLE ( 'NONE', #497, 4.999999999999999100 ) ; +#1291 = ORIENTED_EDGE ( 'NONE', *, *, #1206, .T. ) ; +#1292 = CIRCLE ( 'NONE', #215, 3.249999999999997800 ) ; +#1293 = ORIENTED_EDGE ( 'NONE', *, *, #1125, .T. ) ; +#1294 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1295 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, -25.93074902771996500, -4.499999999999999100 ) ) ; +#1296 = EDGE_CURVE ( 'NONE', #1141, #492, #614, .T. ) ; +#1297 = EDGE_CURVE ( 'NONE', #868, #1695, #652, .T. ) ; +#1298 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1299 = CARTESIAN_POINT ( 'NONE', ( -7.499999999999999100, -2.500000000000000000, 15.00000000000000000 ) ) ; +#1300 = AXIS2_PLACEMENT_3D ( 'NONE', #981, #999, #972 ) ; +#1301 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1302 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1303 = EDGE_LOOP ( 'NONE', ( #1449, #1459, #1465, #1469 ) ) ; +#1304 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1305 = ORIENTED_EDGE ( 'NONE', *, *, #309, .F. ) ; +#1306 = AXIS2_PLACEMENT_3D ( 'NONE', #2, #1622, #699 ) ; +#1307 = EDGE_CURVE ( 'NONE', #1404, #995, #606, .T. ) ; +#1308 = ORIENTED_EDGE ( 'NONE', *, *, #182, .T. ) ; +#1309 = VECTOR ( 'NONE', #1185, 1000.000000000000000 ) ; +#1310 = ORIENTED_EDGE ( 'NONE', *, *, #730, .F. ) ; +#1311 = AXIS2_PLACEMENT_3D ( 'NONE', #1558, #1505, #1485 ) ; +#1312 = PLANE ( 'NONE', #1113 ) ; +#1313 = LINE ( 'NONE', #1218, #1309 ) ; +#1314 = ORIENTED_EDGE ( 'NONE', *, *, #270, .F. ) ; +#1315 = LINE ( 'NONE', #1187, #1346 ) ; +#1316 = CLOSED_SHELL ( 'NONE', ( #313, #77, #1665, #137, #176, #342, #293, #93, #1560, #660, #1258, #1523, #170, #1650, #1441, #1425, #1575, #1711, #1435, #550, #1367, #729, #691, #1689, #1256, #1682, #67, #1657, #100, #204, #148, #222, #1771, #271, #14, #1579, #299, #282, #131, #1634, #198, #59, #8, #322, #706, #356, #1531, #229, #239, #1720 ) ) ; +#1317 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1318 = VECTOR ( 'NONE', #1255, 1000.000000000000000 ) ; +#1319 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1320 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1321 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1322 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999990200, -25.93074902771996500, -15.74999999999999300 ) ) ; +#1323 = VERTEX_POINT ( 'NONE', #1569 ) ; +#1324 = ORIENTED_EDGE ( 'NONE', *, *, #664, .T. ) ; +#1325 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999984900, 2.500000000000000000, -17.99999999999999600 ) ) ; +#1326 = VERTEX_POINT ( 'NONE', #1048 ) ; +#1327 = CIRCLE ( 'NONE', #595, 1.250000000000001100 ) ; +#1328 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, -25.93074902771996500, -11.25000000000000000 ) ) ; +#1329 = EDGE_LOOP ( 'NONE', ( #1116, #837, #663, #1420 ) ) ; +#1330 = VECTOR ( 'NONE', #1274, 1000.000000000000000 ) ; +#1331 = AXIS2_PLACEMENT_3D ( 'NONE', #374, #365, #307 ) ; +#1332 = EDGE_LOOP ( 'NONE', ( #167, #1089, #1503, #1610 ) ) ; +#1333 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999984900, -25.93074902771996500, -17.99999999999999600 ) ) ; +#1334 = CYLINDRICAL_SURFACE ( 'NONE', #410, 3.249999999999998700 ) ; +#1335 = CARTESIAN_POINT ( 'NONE', ( 5.809016994374948300, -2.500000000000000000, 0.0000000000000000000 ) ) ; +#1336 = ORIENTED_EDGE ( 'NONE', *, *, #250, .F. ) ; +#1337 = CARTESIAN_POINT ( 'NONE', ( -7.499999999999985800, -2.499999999999998700, -18.00000000000000400 ) ) ; +#1338 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1339 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1340 = EDGE_LOOP ( 'NONE', ( #501, #581, #1259, #55 ) ) ; +#1341 = EDGE_LOOP ( 'NONE', ( #1251, #522, #607, #698 ) ) ; +#1342 = ORIENTED_EDGE ( 'NONE', *, *, #1127, .T. ) ; +#1343 = CIRCLE ( 'NONE', #311, 5.000000000000000000 ) ; +#1344 = ORIENTED_EDGE ( 'NONE', *, *, #1741, .F. ) ; +#1345 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, 2.500000000000000000, -13.49999999999999600 ) ) ; +#1346 = VECTOR ( 'NONE', #1203, 1000.000000000000000 ) ; +#1347 = ORIENTED_EDGE ( 'NONE', *, *, #1756, .T. ) ; +#1348 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1349 = LINE ( 'NONE', #1271, #1330 ) ; +#1350 = ORIENTED_EDGE ( 'NONE', *, *, #33, .T. ) ; +#1351 = VERTEX_POINT ( 'NONE', #1041 ) ; +#1352 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#1353 = AXIS2_PLACEMENT_3D ( 'NONE', #232, #230, #227 ) ; +#1354 = VECTOR ( 'NONE', #1362, 1000.000000000000000 ) ; +#1355 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000400, 2.500000000000000000, 5.000000000000000000 ) ) ; +#1356 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1357 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 5.000000000000000000 ) ) ; +#1358 = EDGE_CURVE ( 'NONE', #381, #1654, #592, .T. ) ; +#1359 = EDGE_CURVE ( 'NONE', #1180, #283, #585, .T. ) ; +#1360 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1361 = AXIS2_PLACEMENT_3D ( 'NONE', #966, #983, #1064 ) ; +#1362 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1363 = VERTEX_POINT ( 'NONE', #507 ) ; +#1364 = ORIENTED_EDGE ( 'NONE', *, *, #249, .F. ) ; +#1365 = EDGE_LOOP ( 'NONE', ( #19, #771, #438, #1546 ) ) ; +#1366 = FACE_OUTER_BOUND ( 'NONE', #1329, .T. ) ; +#1367 = ADVANCED_FACE ( 'NONE', ( #572 ), #545, .F. ) ; +#1368 = ORIENTED_EDGE ( 'NONE', *, *, #1307, .T. ) ; +#1369 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1370 = LINE ( 'NONE', #1223, #1318 ) ; +#1371 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, -2.499999999999998700, -16.74999999999999300 ) ) ; +#1372 = VERTEX_POINT ( 'NONE', #1580 ) ; +#1373 = VECTOR ( 'NONE', #1321, 1000.000000000000000 ) ; +#1374 = EDGE_CURVE ( 'NONE', #1422, #928, #566, .T. ) ; +#1375 = ORIENTED_EDGE ( 'NONE', *, *, #1110, .T. ) ; +#1376 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, 2.500000000000000000, 3.359770019129964900 ) ) ; +#1377 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1378 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -25.93074902771996500, -2.249999999999999600 ) ) ; +#1379 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1380 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, -25.93074902771996500, -16.74999999999999300 ) ) ; +#1381 = EDGE_LOOP ( 'NONE', ( #667, #670, #478, #710 ) ) ; +#1382 = CARTESIAN_POINT ( 'NONE', ( -7.499999999999999100, -2.500000000000000000, 15.00000000000000000 ) ) ; +#1383 = AXIS2_PLACEMENT_3D ( 'NONE', #841, #835, #821 ) ; +#1384 = ORIENTED_EDGE ( 'NONE', *, *, #1358, .T. ) ; +#1385 = VERTEX_POINT ( 'NONE', #596 ) ; +#1386 = LINE ( 'NONE', #1328, #1373 ) ; +#1387 = VERTEX_POINT ( 'NONE', #651 ) ; +#1388 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942015800E-016, 7.523163845262636800E-032, 7.500000000000000000 ) ) ; +#1389 = VECTOR ( 'NONE', #1317, 1000.000000000000000 ) ; +#1390 = LINE ( 'NONE', #1322, #1389 ) ; +#1391 = ORIENTED_EDGE ( 'NONE', *, *, #958, .T. ) ; +#1392 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, -2.499999999999998700, -17.99999999999999600 ) ) ; +#1393 = ORIENTED_EDGE ( 'NONE', *, *, #369, .T. ) ; +#1394 = EDGE_CURVE ( 'NONE', #1387, #1727, #568, .T. ) ; +#1395 = VECTOR ( 'NONE', #1369, 1000.000000000000000 ) ; +#1396 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1397 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1398 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1399 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1400 = ORIENTED_EDGE ( 'NONE', *, *, #1574, .T. ) ; +#1401 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, -2.499999999999998700, -2.250000000000000400 ) ) ; +#1402 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 10.00000000000000000 ) ) ; +#1403 = ORIENTED_EDGE ( 'NONE', *, *, #1661, .F. ) ; +#1404 = VERTEX_POINT ( 'NONE', #1696 ) ; +#1405 = LINE ( 'NONE', #1410, #1395 ) ; +#1406 = ORIENTED_EDGE ( 'NONE', *, *, #1639, .T. ) ; +#1407 = VECTOR ( 'NONE', #1348, 1000.000000000000000 ) ; +#1408 = ORIENTED_EDGE ( 'NONE', *, *, #1549, .T. ) ; +#1409 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1410 = CARTESIAN_POINT ( 'NONE', ( 5.303300858899104900, -2.500000000000000900, 9.981533515588910900 ) ) ; +#1411 = LINE ( 'NONE', #1376, #1354 ) ; +#1412 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1413 = AXIS2_PLACEMENT_3D ( 'NONE', #135, #156, #132 ) ; +#1414 = DIRECTION ( 'NONE', ( 8.673617379884035500E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1415 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1416 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, -25.93074902771996500, -13.49999999999999600 ) ) ; +#1417 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1418 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1419 = AXIS2_PLACEMENT_3D ( 'NONE', #341, #1150, #195 ) ; +#1420 = ORIENTED_EDGE ( 'NONE', *, *, #160, .T. ) ; +#1421 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1422 = VERTEX_POINT ( 'NONE', #89 ) ; +#1423 = AXIS2_PLACEMENT_3D ( 'NONE', #1620, #557, #277 ) ; +#1424 = ORIENTED_EDGE ( 'NONE', *, *, #664, .F. ) ; +#1425 = ADVANCED_FACE ( 'NONE', ( #526 ), #1164, .T. ) ; +#1426 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1427 = CIRCLE ( 'NONE', #684, 2.250000000000001800 ) ; +#1428 = EDGE_LOOP ( 'NONE', ( #851, #711, #109, #398 ) ) ; +#1429 = VECTOR ( 'NONE', #1506, 1000.000000000000000 ) ; +#1430 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1431 = ORIENTED_EDGE ( 'NONE', *, *, #409, .F. ) ; +#1432 = LINE ( 'NONE', #1545, #1407 ) ; +#1433 = ORIENTED_EDGE ( 'NONE', *, *, #902, .F. ) ; +#1434 = ORIENTED_EDGE ( 'NONE', *, *, #151, .F. ) ; +#1435 = ADVANCED_FACE ( 'NONE', ( #505 ), #500, .F. ) ; +#1436 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1437 = AXIS2_PLACEMENT_3D ( 'NONE', #217, #213, #209 ) ; +#1438 = CARTESIAN_POINT ( 'NONE', ( 5.809016994374948300, -2.499999999999998700, 0.0000000000000000000 ) ) ; +#1439 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999998700, 2.500000000000000400, 3.359770019129964900 ) ) ; +#1440 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1441 = ADVANCED_FACE ( 'NONE', ( #524 ), #934, .T. ) ; +#1442 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, -25.93074902771996500, -17.99999999999999600 ) ) ; +#1443 = ORIENTED_EDGE ( 'NONE', *, *, #1578, .T. ) ; +#1444 = AXIS2_PLACEMENT_3D ( 'NONE', #1738, #1011, #390 ) ; +#1445 = EDGE_CURVE ( 'NONE', #506, #1703, #502, .T. ) ; +#1446 = EDGE_CURVE ( 'NONE', #1180, #1188, #484, .T. ) ; +#1447 = EDGE_LOOP ( 'NONE', ( #504, #1664, #537, #1646 ) ) ; +#1448 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999984900, -2.499999999999998700, -17.99999999999999600 ) ) ; +#1449 = ORIENTED_EDGE ( 'NONE', *, *, #1578, .F. ) ; +#1450 = AXIS2_PLACEMENT_3D ( 'NONE', #825, #819, #808 ) ; +#1451 = APPROVAL_DATE_TIME ( #1454, #1576 ) ; +#1452 = VECTOR ( 'NONE', #47, 1000.000000000000000 ) ; +#1453 = ORIENTED_EDGE ( 'NONE', *, *, #1276, .F. ) ; +#1454 = DATE_AND_TIME ( #1466, #1470 ) ; +#1455 = CIRCLE ( 'NONE', #117, 5.000000000000000000 ) ; +#1456 = ORIENTED_EDGE ( 'NONE', *, *, #1193, .F. ) ; +#1457 = ORIENTED_EDGE ( 'NONE', *, *, #464, .F. ) ; +#1458 = LINE ( 'NONE', #1510, #1429 ) ; +#1459 = ORIENTED_EDGE ( 'NONE', *, *, #1109, .T. ) ; +#1460 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, -7.500000000000000000, 10.00000000000000000 ) ) ; +#1461 = DIRECTION ( 'NONE', ( -2.775557561562889000E-015, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1462 = EDGE_CURVE ( 'NONE', #1326, #1572, #521, .T. ) ; +#1463 = CARTESIAN_POINT ( 'NONE', ( -2.180415093947897000, -2.499999999999998700, -14.56777736655967600 ) ) ; +#1464 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, -25.93074902771996500, -13.49999999999999600 ) ) ; +#1465 = ORIENTED_EDGE ( 'NONE', *, *, #1468, .F. ) ; +#1466 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#1467 = VERTEX_POINT ( 'NONE', #516 ) ; +#1468 = EDGE_CURVE ( 'NONE', #995, #349, #477, .T. ) ; +#1469 = ORIENTED_EDGE ( 'NONE', *, *, #1307, .F. ) ; +#1470 = LOCAL_TIME ( 17, 43, 33.00000000000000000, #1474 ) ; +#1471 = VECTOR ( 'NONE', #35, 1000.000000000000000 ) ; +#1472 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999996400, 2.500000000000000000, -7.749999999999996400 ) ) ; +#1473 = VERTEX_POINT ( 'NONE', #43 ) ; +#1474 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1475 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#1476 = CIRCLE ( 'NONE', #24, 3.249999999999997800 ) ; +#1477 = AXIS2_PLACEMENT_3D ( 'NONE', #982, #900, #905 ) ; +#1478 = VERTEX_POINT ( 'NONE', #331 ) ; +#1479 = PLANE ( 'NONE', #1584 ) ; +#1480 = CIRCLE ( 'NONE', #1708, 2.250000000000001800 ) ; +#1481 = ORIENTED_EDGE ( 'NONE', *, *, #938, .T. ) ; +#1482 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1483 = VERTEX_POINT ( 'NONE', #1260 ) ; +#1484 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, -2.499999999999998700, -15.74999999999999300 ) ) ; +#1485 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1486 = AXIS2_PLACEMENT_3D ( 'NONE', #523, #1319, #1714 ) ; +#1487 = EDGE_CURVE ( 'NONE', #393, #400, #461, .T. ) ; +#1488 = AXIS2_PLACEMENT_3D ( 'NONE', #1402, #1398, #1396 ) ; +#1489 = CARTESIAN_POINT ( 'NONE', ( 6.181694990624913000, 2.500000000000000000, -0.8333333333333328200 ) ) ; +#1490 = CARTESIAN_POINT ( 'NONE', ( 0.9099025766973141100, 1.578429360648618200E-016, 14.94460054676673600 ) ) ; +#1491 = ORIENTED_EDGE ( 'NONE', *, *, #512, .F. ) ; +#1492 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, 2.500000000000000000, -10.24999999999999800 ) ) ; +#1493 = ORIENTED_EDGE ( 'NONE', *, *, #160, .F. ) ; +#1494 = APPROVAL_PERSON_ORGANIZATION ( #1496, #1576, #1765 ) ; +#1495 = ORIENTED_EDGE ( 'NONE', *, *, #1007, .F. ) ; +#1496 = PERSON_AND_ORGANIZATION ( #85, #1746 ) ; +#1497 = LINE ( 'NONE', #11, #1471 ) ; +#1498 = VERTEX_POINT ( 'NONE', #887 ) ; +#1499 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #1671 ) ) ; +#1500 = DATE_AND_TIME ( #1515, #1519 ) ; +#1501 = VECTOR ( 'NONE', #139, 1000.000000000000000 ) ; +#1502 = ORIENTED_EDGE ( 'NONE', *, *, #320, .F. ) ; +#1503 = ORIENTED_EDGE ( 'NONE', *, *, #1194, .T. ) ; +#1504 = LINE ( 'NONE', #180, #1501 ) ; +#1505 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1506 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1507 = CC_DESIGN_SECURITY_CLASSIFICATION ( #1624, ( #1733 ) ) ; +#1508 = CARTESIAN_POINT ( 'NONE', ( 5.809016994374947500, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#1509 = AXIS2_PLACEMENT_3D ( 'NONE', #245, #397, #205 ) ; +#1510 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999995600, -25.93074902771996500, -11.24999999999999800 ) ) ; +#1511 = ORIENTED_EDGE ( 'NONE', *, *, #288, .T. ) ; +#1512 = VERTEX_POINT ( 'NONE', #884 ) ; +#1513 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1514 = ORIENTED_EDGE ( 'NONE', *, *, #1445, .F. ) ; +#1515 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#1516 = LINE ( 'NONE', #1534, #1452 ) ; +#1517 = VERTEX_POINT ( 'NONE', #46 ) ; +#1518 = AXIS2_PLACEMENT_3D ( 'NONE', #27, #25, #22 ) ; +#1519 = LOCAL_TIME ( 17, 43, 33.00000000000000000, #1538 ) ; +#1520 = CIRCLE ( 'NONE', #1606, 0.5000000000000004400 ) ; +#1521 = ORIENTED_EDGE ( 'NONE', *, *, #1762, .T. ) ; +#1522 = VECTOR ( 'NONE', #64, 1000.000000000000000 ) ; +#1523 = ADVANCED_FACE ( 'NONE', ( #455 ), #434, .T. ) ; +#1524 = EDGE_CURVE ( 'NONE', #717, #746, #436, .T. ) ; +#1525 = ORIENTED_EDGE ( 'NONE', *, *, #720, .F. ) ; +#1526 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 2.500000000000000000, 15.00000000000000000 ) ) ; +#1527 = DIRECTION ( 'NONE', ( -1.868163743359639600E-015, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1528 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1529 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, 2.500000000000000000, -13.49999999999999600 ) ) ; +#1530 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, 2.500000000000000000, -13.49999999999999600 ) ) ; +#1531 = ADVANCED_FACE ( 'NONE', ( #480 ), #416, .T. ) ; +#1532 = CC_DESIGN_APPROVAL ( #1576, ( #1624 ) ) ; +#1533 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, -2.499999999999998700, -13.49999999999999600 ) ) ; +#1534 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, -2.500000000000000000, 15.00000000000000000 ) ) ; +#1535 = AXIS2_PLACEMENT_3D ( 'NONE', #142, #134, #129 ) ; +#1536 = EDGE_LOOP ( 'NONE', ( #1076, #1261, #1156, #745 ) ) ; +#1537 = EDGE_LOOP ( 'NONE', ( #1676, #1111, #1521, #1433 ) ) ; +#1538 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1539 = EDGE_LOOP ( 'NONE', ( #865, #889, #973, #993 ) ) ; +#1540 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1541 = PERSON_AND_ORGANIZATION ( #85, #1746 ) ; +#1542 = LINE ( 'NONE', #112, #1522 ) ; +#1543 = PERSON_AND_ORGANIZATION ( #85, #1746 ) ; +#1544 = CIRCLE ( 'NONE', #1413, 2.249999999999999600 ) ; +#1545 = CARTESIAN_POINT ( 'NONE', ( 1.708171262247572200, -25.93074902771996500, -15.23205080756885900 ) ) ; +#1546 = ORIENTED_EDGE ( 'NONE', *, *, #347, .F. ) ; +#1547 = AXIS2_PLACEMENT_3D ( 'NONE', #187, #1183, #228 ) ; +#1548 = EDGE_CURVE ( 'NONE', #1626, #193, #419, .T. ) ; +#1549 = EDGE_CURVE ( 'NONE', #1626, #381, #442, .T. ) ; +#1550 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1551 = FACE_OUTER_BOUND ( 'NONE', #602, .T. ) ; +#1552 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1553 = AXIS2_PLACEMENT_3D ( 'NONE', #1246, #1066, #1065 ) ; +#1554 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.500000000000000400, 5.000000000000000000 ) ) ; +#1555 = CARTESIAN_POINT ( 'NONE', ( 0.9099025766973135600, 2.500000000000000000, 14.94460054676673400 ) ) ; +#1556 = PLANE ( 'NONE', #1311 ) ; +#1557 = EDGE_CURVE ( 'NONE', #373, #717, #459, .T. ) ; +#1558 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1559 = ORIENTED_EDGE ( 'NONE', *, *, #962, .F. ) ; +#1560 = ADVANCED_FACE ( 'NONE', ( #421 ), #372, .F. ) ; +#1561 = ORIENTED_EDGE ( 'NONE', *, *, #310, .F. ) ; +#1562 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 6.938893903907231300E-016 ) ) ; +#1563 = PERSON_AND_ORGANIZATION ( #85, #1746 ) ; +#1564 = VECTOR ( 'NONE', #385, 1000.000000000000000 ) ; +#1565 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.93074902771996500, -15.23205080756885900 ) ) ; +#1566 = APPROVAL_DATE_TIME ( #1587, #1704 ) ; +#1567 = LINE ( 'NONE', #199, #1590 ) ; +#1568 = ORIENTED_EDGE ( 'NONE', *, *, #512, .T. ) ; +#1569 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, 2.500000000000000000, -2.249999999999999600 ) ) ; +#1570 = DIRECTION ( 'NONE', ( -6.938893903907231300E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1571 = LINE ( 'NONE', #303, #1593 ) ; +#1572 = VERTEX_POINT ( 'NONE', #1371 ) ; +#1573 = ORIENTED_EDGE ( 'NONE', *, *, #69, .T. ) ; +#1574 = EDGE_CURVE ( 'NONE', #1517, #127, #399, .T. ) ; +#1575 = ADVANCED_FACE ( 'NONE', ( #384 ), #158, .F. ) ; +#1576 = APPROVAL ( #1352, 'UNSPECIFIED' ) ; +#1577 = PLANE ( 'NONE', #362 ) ; +#1578 = EDGE_CURVE ( 'NONE', #382, #1404, #380, .T. ) ; +#1579 = ADVANCED_FACE ( 'NONE', ( #354 ), #326, .T. ) ; +#1580 = CARTESIAN_POINT ( 'NONE', ( 5.303300858899104900, -2.500000000000000000, 7.500000000000000000 ) ) ; +#1581 = AXIS2_PLACEMENT_3D ( 'NONE', #538, #406, #1754 ) ; +#1582 = EDGE_CURVE ( 'NONE', #127, #1621, #328, .T. ) ; +#1583 = EDGE_CURVE ( 'NONE', #422, #625, #352, .T. ) ; +#1584 = AXIS2_PLACEMENT_3D ( 'NONE', #1460, #1430, #1426 ) ; +#1585 = ORIENTED_EDGE ( 'NONE', *, *, #1130, .F. ) ; +#1586 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1587 = DATE_AND_TIME ( #1589, #1592 ) ; +#1588 = ORIENTED_EDGE ( 'NONE', *, *, #376, .T. ) ; +#1589 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#1590 = VECTOR ( 'NONE', #200, 1000.000000000000000 ) ; +#1591 = VERTEX_POINT ( 'NONE', #292 ) ; +#1592 = LOCAL_TIME ( 17, 43, 33.00000000000000000, #1604 ) ; +#1593 = VECTOR ( 'NONE', #291, 1000.000000000000000 ) ; +#1594 = ORIENTED_EDGE ( 'NONE', *, *, #939, .F. ) ; +#1595 = ORIENTED_EDGE ( 'NONE', *, *, #53, .T. ) ; +#1596 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1597 = LINE ( 'NONE', #340, #1564 ) ; +#1598 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #1500, #7, ( #1624 ) ) ; +#1599 = CARTESIAN_POINT ( 'NONE', ( -5.809016994374948300, -25.93074902771996500, -0.5000000000000000000 ) ) ; +#1600 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1601 = ORIENTED_EDGE ( 'NONE', *, *, #1524, .F. ) ; +#1602 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1541, #1001, ( #1624 ) ) ; +#1603 = ORIENTED_EDGE ( 'NONE', *, *, #1524, .T. ) ; +#1604 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1605 = EDGE_CURVE ( 'NONE', #1188, #495, #375, .T. ) ; +#1606 = AXIS2_PLACEMENT_3D ( 'NONE', #39, #21, #1 ) ; +#1607 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1608 = APPROVAL_PERSON_ORGANIZATION ( #1612, #1704, #444 ) ; +#1609 = FACE_BOUND ( 'NONE', #1071, .T. ) ; +#1610 = ORIENTED_EDGE ( 'NONE', *, *, #1638, .T. ) ; +#1611 = MANIFOLD_SOLID_BREP ( 'Fillet3', #1316 ) ; +#1612 = PERSON_AND_ORGANIZATION ( #85, #1746 ) ; +#1613 = CYLINDRICAL_SURFACE ( 'NONE', #1247, 0.5000000000000004400 ) ; +#1614 = VERTEX_POINT ( 'NONE', #1243 ) ; +#1615 = FACE_BOUND ( 'NONE', #908, .T. ) ; +#1616 = ORIENTED_EDGE ( 'NONE', *, *, #756, .F. ) ; +#1617 = CARTESIAN_POINT ( 'NONE', ( -1.708171262247574000, -2.499999999999998700, -15.23205080756885900 ) ) ; +#1618 = AXIS2_PLACEMENT_3D ( 'NONE', #627, #1409, #487 ) ; +#1619 = EDGE_CURVE ( 'NONE', #1323, #1766, #333, .T. ) ; +#1620 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -25.93074902771996500, -2.168404344971008900E-016 ) ) ; +#1621 = VERTEX_POINT ( 'NONE', #144 ) ; +#1622 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1623 = ORIENTED_EDGE ( 'NONE', *, *, #1023, .F. ) ; +#1624 = SECURITY_CLASSIFICATION ( '', '', #827 ) ; +#1625 = DATE_AND_TIME ( #1627, #1645 ) ; +#1626 = VERTEX_POINT ( 'NONE', #980 ) ; +#1627 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#1628 = FACE_BOUND ( 'NONE', #856, .T. ) ; +#1629 = AXIS2_PLACEMENT_3D ( 'NONE', #92, #90, #87 ) ; +#1630 = ORIENTED_EDGE ( 'NONE', *, *, #1374, .F. ) ; +#1631 = CYLINDRICAL_SURFACE ( 'NONE', #1083, 2.500000000000000400 ) ; +#1632 = ORIENTED_EDGE ( 'NONE', *, *, #1487, .T. ) ; +#1633 = FACE_OUTER_BOUND ( 'NONE', #1091, .T. ) ; +#1634 = ADVANCED_FACE ( 'NONE', ( #301 ), #281, .T. ) ; +#1635 = ORIENTED_EDGE ( 'NONE', *, *, #1548, .F. ) ; +#1636 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1637 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1543, #266, ( #1733 ) ) ; +#1638 = EDGE_CURVE ( 'NONE', #1051, #736, #284, .T. ) ; +#1639 = EDGE_CURVE ( 'NONE', #1147, #1220, #304, .T. ) ; +#1640 = CARTESIAN_POINT ( 'NONE', ( 1.708171262247572200, -25.93074902771996500, -14.73205080756885900 ) ) ; +#1641 = AXIS2_PLACEMENT_3D ( 'NONE', #945, #898, #930 ) ; +#1642 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1643 = ORIENTED_EDGE ( 'NONE', *, *, #1557, .F. ) ; +#1644 = ORIENTED_EDGE ( 'NONE', *, *, #464, .T. ) ; +#1645 = LOCAL_TIME ( 17, 43, 33.00000000000000000, #1647 ) ; +#1646 = ORIENTED_EDGE ( 'NONE', *, *, #309, .T. ) ; +#1647 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1648 = CIRCLE ( 'NONE', #991, 0.5000000000000000000 ) ; +#1649 = EDGE_LOOP ( 'NONE', ( #327, #1568, #806, #219 ) ) ; +#1650 = ADVANCED_FACE ( 'NONE', ( #263 ), #243, .F. ) ; +#1651 = EDGE_CURVE ( 'NONE', #285, #349, #306, .T. ) ; +#1652 = PERSON_AND_ORGANIZATION ( #85, #1746 ) ; +#1653 = FACE_OUTER_BOUND ( 'NONE', #403, .T. ) ; +#1654 = VERTEX_POINT ( 'NONE', #106 ) ; +#1655 = VECTOR ( 'NONE', #508, 1000.000000000000000 ) ; +#1656 = ORIENTED_EDGE ( 'NONE', *, *, #749, .T. ) ; +#1657 = ADVANCED_FACE ( 'NONE', ( #289 ), #218, .T. ) ; +#1658 = EDGE_CURVE ( 'NONE', #790, #795, #235, .T. ) ; +#1659 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1563, #425, ( #1733 ) ) ; +#1660 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1661 = EDGE_CURVE ( 'NONE', #1079, #995, #240, .T. ) ; +#1662 = AXIS2_PLACEMENT_3D ( 'NONE', #800, #797, #793 ) ; +#1663 = ORIENTED_EDGE ( 'NONE', *, *, #152, .F. ) ; +#1664 = ORIENTED_EDGE ( 'NONE', *, *, #923, .T. ) ; +#1665 = ADVANCED_FACE ( 'NONE', ( #258 ), #946, .F. ) ; +#1666 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1667 = EDGE_LOOP ( 'NONE', ( #1245, #527, #612, #1525 ) ) ; +#1668 = APPROVAL_DATE_TIME ( #1674, #290 ) ; +#1669 = FACE_OUTER_BOUND ( 'NONE', #765, .T. ) ; +#1670 = ORIENTED_EDGE ( 'NONE', *, *, #182, .F. ) ; +#1671 = PRODUCT ( 'Trigger_Spring', 'Trigger_Spring', '', ( #1095 ) ) ; +#1672 = AXIS2_PLACEMENT_3D ( 'NONE', #1442, #247, #805 ) ; +#1673 = EDGE_CURVE ( 'NONE', #1498, #1517, #210, .T. ) ; +#1674 = DATE_AND_TIME ( #1694, #1697 ) ; +#1675 = CYLINDRICAL_SURFACE ( 'NONE', #626, 2.500000000000000400 ) ; +#1676 = ORIENTED_EDGE ( 'NONE', *, *, #1038, .T. ) ; +#1677 = FACE_BOUND ( 'NONE', #950, .T. ) ; +#1678 = ORIENTED_EDGE ( 'NONE', *, *, #555, .F. ) ; +#1679 = AXIS2_PLACEMENT_3D ( 'NONE', #562, #559, #556 ) ; +#1680 = ORIENTED_EDGE ( 'NONE', *, *, #1101, .F. ) ; +#1681 = LINE ( 'NONE', #515, #1655 ) ; +#1682 = ADVANCED_FACE ( 'NONE', ( #190 ), #165, .T. ) ; +#1683 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1684 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1685 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942019700E-016, 7.523163845262643300E-032, 7.500000000000000000 ) ) ; +#1686 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1687 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.500000000000000400, 10.00000000000000000 ) ) ; +#1688 = CC_DESIGN_APPROVAL ( #1704, ( #1733 ) ) ; +#1689 = ADVANCED_FACE ( 'NONE', ( #237 ), #149, .T. ) ; +#1690 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1691 = ORIENTED_EDGE ( 'NONE', *, *, #423, .T. ) ; +#1692 = ORIENTED_EDGE ( 'NONE', *, *, #1110, .F. ) ; +#1693 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, -25.93074902771996500, -13.49999999999999600 ) ) ; +#1694 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#1695 = VERTEX_POINT ( 'NONE', #822 ) ; +#1696 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999984900, -2.499999999999998700, -16.74999999999999300 ) ) ; +#1697 = LOCAL_TIME ( 17, 43, 33.00000000000000000, #1701 ) ; +#1698 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.500000000000000000, 12.50000000000000000 ) ) ; +#1699 = FACE_OUTER_BOUND ( 'NONE', #1003, .T. ) ; +#1700 = VERTEX_POINT ( 'NONE', #1758 ) ; +#1701 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1702 = CYLINDRICAL_SURFACE ( 'NONE', #252, 3.249999999999998700 ) ; +#1703 = VERTEX_POINT ( 'NONE', #1335 ) ; +#1704 = APPROVAL ( #544, 'UNSPECIFIED' ) ; +#1705 = FACE_OUTER_BOUND ( 'NONE', #942, .T. ) ; +#1706 = ORIENTED_EDGE ( 'NONE', *, *, #623, .F. ) ; +#1707 = EDGE_CURVE ( 'NONE', #1351, #169, #163, .T. ) ; +#1708 = AXIS2_PLACEMENT_3D ( 'NONE', #60, #9, #5 ) ; +#1709 = CARTESIAN_POINT ( 'NONE', ( -5.809016994374948300, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#1710 = CARTESIAN_POINT ( 'NONE', ( 1.249000902703301100E-014, -25.93074902771996500, -17.99999999999999600 ) ) ; +#1711 = ADVANCED_FACE ( 'NONE', ( #194 ), #126, .T. ) ; +#1712 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, 2.500000000000000000, -8.999999999999998200 ) ) ; +#1713 = AXIS2_PLACEMENT_3D ( 'NONE', #1685, #359, #621 ) ; +#1714 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1715 = EDGE_CURVE ( 'NONE', #824, #1719, #188, .T. ) ; +#1716 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, -25.93074902771996500, -8.597800040494614000E-016 ) ) ; +#1717 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1718 = ORIENTED_EDGE ( 'NONE', *, *, #226, .F. ) ; +#1719 = VERTEX_POINT ( 'NONE', #1617 ) ; +#1720 = ADVANCED_FACE ( 'NONE', ( #122 ), #107, .T. ) ; +#1721 = APPROVAL_PERSON_ORGANIZATION ( #1725, #290, #140 ) ; +#1722 = CIRCLE ( 'NONE', #904, 7.500000000000000000 ) ; +#1723 = ORIENTED_EDGE ( 'NONE', *, *, #1619, .F. ) ; +#1724 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, -25.93074902771996500, -10.24999999999999800 ) ) ; +#1725 = PERSON_AND_ORGANIZATION ( #85, #1746 ) ; +#1726 = CIRCLE ( 'NONE', #443, 2.249999999999996900 ) ; +#1727 = VERTEX_POINT ( 'NONE', #1222 ) ; +#1728 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, -25.93074902771996500, -8.999999999999998200 ) ) ; +#1729 = VECTOR ( 'NONE', #732, 1000.000000000000000 ) ; +#1730 = ORIENTED_EDGE ( 'NONE', *, *, #509, .F. ) ; +#1731 = ORIENTED_EDGE ( 'NONE', *, *, #1548, .T. ) ; +#1732 = LINE ( 'NONE', #727, #1729 ) ; +#1733 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #1671, .NOT_KNOWN. ) ; +#1734 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1735 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1736 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999987600, -2.499999999999998700, 0.0000000000000000000 ) ) ; +#1737 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999987600, -25.93074902771996500, -16.99999999999999600 ) ) ; +#1738 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, 2.500000000000000000, -13.49999999999999600 ) ) ; +#1739 = AXIS2_PLACEMENT_3D ( 'NONE', #133, #553, #839 ) ; +#1740 = EDGE_CURVE ( 'NONE', #169, #717, #111, .T. ) ; +#1741 = EDGE_CURVE ( 'NONE', #625, #1269, #145, .T. ) ; +#1742 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1743 = AXIS2_PLACEMENT_3D ( 'NONE', #892, #880, #895 ) ; +#1744 = PERSON_AND_ORGANIZATION ( #85, #1746 ) ; +#1745 = ORIENTED_EDGE ( 'NONE', *, *, #1715, .F. ) ; +#1746 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#1747 = FACE_OUTER_BOUND ( 'NONE', #494, .T. ) ; +#1748 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999996400, -25.93074902771996500, -8.999999999999998200 ) ) ; +#1749 = FACE_OUTER_BOUND ( 'NONE', #649, .T. ) ; +#1750 = SHAPE_DEFINITION_REPRESENTATION ( #66, #91 ) ; +#1751 = VECTOR ( 'NONE', #739, 1000.000000000000000 ) ; +#1752 = ORIENTED_EDGE ( 'NONE', *, *, #681, .F. ) ; +#1753 = CYLINDRICAL_SURFACE ( 'NONE', #154, 5.000000000000000000 ) ; +#1754 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1755 = ORIENTED_EDGE ( 'NONE', *, *, #95, .F. ) ; +#1756 = EDGE_CURVE ( 'NONE', #690, #875, #124, .T. ) ; +#1757 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1758 = CARTESIAN_POINT ( 'NONE', ( -5.303300858899107500, 2.500000000000000000, 9.981533515588910900 ) ) ; +#1759 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1760 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1761 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1762 = EDGE_CURVE ( 'NONE', #1121, #782, #168, .T. ) ; +#1763 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #1625, #560, ( #6 ) ) ; +#1764 = ORIENTED_EDGE ( 'NONE', *, *, #799, .T. ) ; +#1765 = APPROVAL_ROLE ( '' ) ; +#1766 = VERTEX_POINT ( 'NONE', #944 ) ; +#1767 = EDGE_CURVE ( 'NONE', #495, #690, #79, .T. ) ; +#1768 = AXIS2_PLACEMENT_3D ( 'NONE', #760, #753, #751 ) ; +#1769 = FACE_OUTER_BOUND ( 'NONE', #481, .T. ) ; +#1770 = CYLINDRICAL_SURFACE ( 'NONE', #1743, 5.000000000000000000 ) ; +#1771 = ADVANCED_FACE ( 'NONE', ( #82 ), #37, .F. ) ; +#1772 = LINE ( 'NONE', #724, #1751 ) ; +#1773 = ORIENTED_EDGE ( 'NONE', *, *, #4, .T. ) ; +#1774 = ORIENTED_EDGE ( 'NONE', *, *, #409, .T. ) ; +#1775 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STEP/Trigger_Spring_Cap.step b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Trigger_Spring_Cap.step new file mode 100644 index 0000000..b3b465f --- /dev/null +++ b/Firearms/The_Experiment_Remake-RollaTroll/STEP/Trigger_Spring_Cap.step @@ -0,0 +1,468 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Trigger_Spring_Cap.STEP', + '2013-11-10T07:43:05', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = CC_DESIGN_APPROVAL ( #423, ( #26 ) ) ; +#2 = AXIS2_PLACEMENT_3D ( 'NONE', #435, #439, #429 ) ; +#3 = VERTEX_POINT ( 'NONE', #375 ) ; +#4 = AXIS2_PLACEMENT_3D ( 'NONE', #194, #383, #388 ) ; +#5 = ORIENTED_EDGE ( 'NONE', *, *, #95, .T. ) ; +#6 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #82, #44, ( #26 ) ) ; +#7 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#8 = AXIS2_PLACEMENT_3D ( 'NONE', #384, #392, #378 ) ; +#9 = AXIS2_PLACEMENT_3D ( 'NONE', #168, #450, #18 ) ; +#10 = CC_DESIGN_APPROVAL ( #33, ( #15 ) ) ; +#11 = CLOSED_SHELL ( 'NONE', ( #112, #85, #87, #91, #105, #103, #71, #118, #66, #77, #80, #115 ) ) ; +#12 = AXIS2_PLACEMENT_3D ( 'NONE', #389, #386, #382 ) ; +#13 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#14 = AXIS2_PLACEMENT_3D ( 'NONE', #416, #129, #385 ) ; +#15 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #26, #310 ) ; +#16 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #108, #64, ( #15 ) ) ; +#17 = AXIS2_PLACEMENT_3D ( 'NONE', #427, #433, #428 ) ; +#18 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#19 = AXIS2_PLACEMENT_3D ( 'NONE', #13, #443, #445 ) ; +#20 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #98, #50, ( #15 ) ) ; +#21 = PRODUCT ( 'Trigger_Spring_Cap', 'Trigger_Spring_Cap', '', ( #58 ) ) ; +#22 = ORIENTED_EDGE ( 'NONE', *, *, #176, .T. ) ; +#23 = AXIS2_PLACEMENT_3D ( 'NONE', #377, #25, #437 ) ; +#24 = VERTEX_POINT ( 'NONE', #417 ) ; +#25 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#26 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #21, .NOT_KNOWN. ) ; +#27 = AXIS2_PLACEMENT_3D ( 'NONE', #376, #350, #374 ) ; +#28 = ORIENTED_EDGE ( 'NONE', *, *, #167, .F. ) ; +#29 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #88, 'distance_accuracy_value', 'NONE'); +#30 = AXIS2_PLACEMENT_3D ( 'NONE', #441, #349, #340 ) ; +#31 = DATE_TIME_ROLE ( 'classification_date' ) ; +#32 = AXIS2_PLACEMENT_3D ( 'NONE', #321, #314, #318 ) ; +#33 = APPROVAL ( #55, 'UNSPECIFIED' ) ; +#34 = PLANE ( 'NONE', #14 ) ; +#35 = APPROVAL_ROLE ( '' ) ; +#36 = EDGE_CURVE ( 'NONE', #319, #415, #279, .T. ) ; +#37 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#38 = APPROVAL_ROLE ( '' ) ; +#39 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #61 ) ; +#40 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#41 = AXIS2_PLACEMENT_3D ( 'NONE', #352, #348, #339 ) ; +#42 = ORIENTED_EDGE ( 'NONE', *, *, #239, .T. ) ; +#43 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#44 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#45 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#46 = AXIS2_PLACEMENT_3D ( 'NONE', #302, #295, #297 ) ; +#47 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #75 ) ; +#48 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#49 = APPROVAL_ROLE ( '' ) ; +#50 = DATE_TIME_ROLE ( 'creation_date' ) ; +#51 = APPROVAL_DATE_TIME ( #52, #259 ) ; +#52 = DATE_AND_TIME ( #53, #56 ) ; +#53 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#54 = EDGE_CURVE ( 'NONE', #448, #311, #285, .T. ) ; +#55 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#56 = LOCAL_TIME ( 17, 43, 5.000000000000000000, #59 ) ; +#57 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#58 = MECHANICAL_CONTEXT ( 'NONE', #75, 'mechanical' ) ; +#59 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#60 = APPROVAL_PERSON_ORGANIZATION ( #62, #259, #38 ) ; +#61 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#62 = PERSON_AND_ORGANIZATION ( #7, #125 ) ; +#63 = DATE_AND_TIME ( #70, #72 ) ; +#64 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#65 = AXIS2_PLACEMENT_3D ( 'NONE', #283, #288, #282 ) ; +#66 = ADVANCED_FACE ( 'NONE', ( #276 ), #267, .F. ) ; +#67 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68 = EDGE_CURVE ( 'NONE', #309, #147, #275, .T. ) ; +#69 = PLANE ( 'NONE', #9 ) ; +#70 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#71 = ADVANCED_FACE ( 'NONE', ( #284 ), #261, .T. ) ; +#72 = LOCAL_TIME ( 17, 43, 5.000000000000000000, #74 ) ; +#73 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#74 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#75 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#76 = PERSON_AND_ORGANIZATION ( #7, #125 ) ; +#77 = ADVANCED_FACE ( 'NONE', ( #268 ), #380, .T. ) ; +#78 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#79 = AXIS2_PLACEMENT_3D ( 'NONE', #273, #270, #256 ) ; +#80 = ADVANCED_FACE ( 'NONE', ( #264 ), #254, .F. ) ; +#81 = PERSON_AND_ORGANIZATION ( #7, #125 ) ; +#82 = PERSON_AND_ORGANIZATION ( #7, #125 ) ; +#83 = APPROVAL_DATE_TIME ( #84, #423 ) ; +#84 = DATE_AND_TIME ( #89, #90 ) ; +#85 = ADVANCED_FACE ( 'NONE', ( #257 ), #248, .T. ) ; +#86 = ORIENTED_EDGE ( 'NONE', *, *, #95, .F. ) ; +#87 = ADVANCED_FACE ( 'NONE', ( #265, #255 ), #69, .T. ) ; +#88 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#89 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#90 = LOCAL_TIME ( 17, 43, 5.000000000000000000, #92 ) ; +#91 = ADVANCED_FACE ( 'NONE', ( #263, #245 ), #34, .F. ) ; +#92 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#93 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#94 = APPROVAL_PERSON_ORGANIZATION ( #97, #423, #35 ) ; +#95 = EDGE_CURVE ( 'NONE', #430, #345, #241, .T. ) ; +#96 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#97 = PERSON_AND_ORGANIZATION ( #7, #125 ) ; +#98 = DATE_AND_TIME ( #100, #101 ) ; +#99 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#100 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#101 = LOCAL_TIME ( 17, 43, 5.000000000000000000, #106 ) ; +#102 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#103 = ADVANCED_FACE ( 'NONE', ( #246 ), #434, .F. ) ; +#104 = AXIS2_PLACEMENT_3D ( 'NONE', #252, #262, #250 ) ; +#105 = ADVANCED_FACE ( 'NONE', ( #238 ), #231, .T. ) ; +#106 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#107 = EDGE_CURVE ( 'NONE', #139, #411, #253, .T. ) ; +#108 = PERSON_AND_ORGANIZATION ( #7, #125 ) ; +#109 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#110 = APPROVAL_DATE_TIME ( #113, #33 ) ; +#111 = ORIENTED_EDGE ( 'NONE', *, *, #226, .T. ) ; +#112 = ADVANCED_FACE ( 'NONE', ( #232 ), #220, .F. ) ; +#113 = DATE_AND_TIME ( #114, #116 ) ; +#114 = CALENDAR_DATE ( 2013, 10, 11 ) ; +#115 = ADVANCED_FACE ( 'NONE', ( #235 ), #357, .T. ) ; +#116 = LOCAL_TIME ( 17, 43, 5.000000000000000000, #117 ) ; +#117 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#118 = ADVANCED_FACE ( 'NONE', ( #228 ), #344, .F. ) ; +#119 = AXIS2_PLACEMENT_3D ( 'NONE', #266, #236, #240 ) ; +#120 = APPROVAL_PERSON_ORGANIZATION ( #121, #33, #49 ) ; +#121 = PERSON_AND_ORGANIZATION ( #7, #125 ) ; +#122 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#123 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#124 = PERSON_AND_ORGANIZATION ( #7, #125 ) ; +#125 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#126 = SHAPE_DEFINITION_REPRESENTATION ( #192, #298 ) ; +#127 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#128 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ; +#129 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#130 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #21 ) ) ; +#131 = EDGE_CURVE ( 'NONE', #333, #430, #217, .T. ) ; +#132 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#133 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ; +#134 = AXIS2_PLACEMENT_3D ( 'NONE', #216, #243, #207 ) ; +#135 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#136 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -7.500000000000001800 ) ) ; +#137 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, 0.0000000000000000000, -5.000000000000000000 ) ) ; +#138 = EDGE_CURVE ( 'NONE', #333, #3, #230, .T. ) ; +#139 = VERTEX_POINT ( 'NONE', #335 ) ; +#140 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#141 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #11 ) ; +#142 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -5.000000000000000000 ) ) ; +#143 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#144 = EDGE_LOOP ( 'NONE', ( #446, #442, #5, #111 ) ) ; +#145 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#146 = EDGE_CURVE ( 'NONE', #415, #147, #211, .T. ) ; +#147 = VERTEX_POINT ( 'NONE', #365 ) ; +#148 = AXIS2_PLACEMENT_3D ( 'NONE', #193, #175, #185 ) ; +#149 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ; +#150 = VECTOR ( 'NONE', #99, 1000.000000000000000 ) ; +#151 = LINE ( 'NONE', #136, #150 ) ; +#152 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ; +#153 = CIRCLE ( 'NONE', #210, 5.000000000000000900 ) ; +#154 = VECTOR ( 'NONE', #393, 1000.000000000000000 ) ; +#155 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#156 = EDGE_CURVE ( 'NONE', #292, #415, #212, .T. ) ; +#157 = CIRCLE ( 'NONE', #202, 2.500000000000000900 ) ; +#158 = VECTOR ( 'NONE', #160, 1000.000000000000000 ) ; +#159 = LINE ( 'NONE', #183, #158 ) ; +#160 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#161 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 0.0000000000000000000, -5.000000000000000000 ) ) ; +#162 = VECTOR ( 'NONE', #169, 1000.000000000000000 ) ; +#163 = CIRCLE ( 'NONE', #164, 5.000000000000000000 ) ; +#164 = AXIS2_PLACEMENT_3D ( 'NONE', #149, #145, #143 ) ; +#165 = VECTOR ( 'NONE', #196, 1000.000000000000000 ) ; +#166 = CIRCLE ( 'NONE', #177, 2.500000000000000900 ) ; +#167 = EDGE_CURVE ( 'NONE', #311, #402, #215, .T. ) ; +#168 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#169 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#170 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 2.500000000000000000, -5.000000000000000000 ) ) ; +#171 = VECTOR ( 'NONE', #199, 1000.000000000000000 ) ; +#172 = LINE ( 'NONE', #184, #165 ) ; +#173 = CIRCLE ( 'NONE', #148, 5.000000000000000000 ) ; +#174 = VECTOR ( 'NONE', #227, 1000.000000000000000 ) ; +#175 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#176 = EDGE_CURVE ( 'NONE', #147, #311, #222, .T. ) ; +#177 = AXIS2_PLACEMENT_3D ( 'NONE', #142, #140, #135 ) ; +#178 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 0.0000000000000000000, -5.000000000000000000 ) ) ; +#179 = LINE ( 'NONE', #251, #174 ) ; +#180 = CIRCLE ( 'NONE', #134, 2.500000000000001300 ) ; +#181 = LINE ( 'NONE', #170, #162 ) ; +#182 = LINE ( 'NONE', #244, #171 ) ; +#183 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -10.00000000000000000 ) ) ; +#184 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#185 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#186 = CIRCLE ( 'NONE', #119, 5.000000000000000000 ) ; +#187 = VECTOR ( 'NONE', #281, 1000.000000000000000 ) ; +#188 = CIRCLE ( 'NONE', #104, 2.500000000000000900 ) ; +#189 = CC_DESIGN_SECURITY_CLASSIFICATION ( #362, ( #26 ) ) ; +#190 = EDGE_CURVE ( 'NONE', #3, #345, #204, .T. ) ; +#191 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#192 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #15 ) ; +#193 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ; +#194 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ; +#195 = CIRCLE ( 'NONE', #79, 5.000000000000000900 ) ; +#196 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#197 = VECTOR ( 'NONE', #306, 1000.000000000000000 ) ; +#198 = LINE ( 'NONE', #289, #187 ) ; +#199 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#200 = VECTOR ( 'NONE', #320, 1000.000000000000000 ) ; +#201 = ORIENTED_EDGE ( 'NONE', *, *, #131, .F. ) ; +#202 = AXIS2_PLACEMENT_3D ( 'NONE', #133, #127, #123 ) ; +#203 = CIRCLE ( 'NONE', #65, 5.000000000000000000 ) ; +#204 = LINE ( 'NONE', #323, #200 ) ; +#205 = VECTOR ( 'NONE', #331, 1000.000000000000000 ) ; +#206 = LINE ( 'NONE', #304, #197 ) ; +#207 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#208 = EDGE_CURVE ( 'NONE', #432, #391, #206, .T. ) ; +#209 = VECTOR ( 'NONE', #328, 1000.000000000000000 ) ; +#210 = AXIS2_PLACEMENT_3D ( 'NONE', #102, #109, #96 ) ; +#211 = LINE ( 'NONE', #337, #209 ) ; +#212 = CIRCLE ( 'NONE', #32, 2.500000000000000900 ) ; +#213 = VECTOR ( 'NONE', #356, 1000.000000000000000 ) ; +#214 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -10.00000000000000000 ) ) ; +#215 = LINE ( 'NONE', #326, #205 ) ; +#216 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#217 = LINE ( 'NONE', #329, #218 ) ; +#218 = VECTOR ( 'NONE', #338, 1000.000000000000000 ) ; +#219 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 0.0000000000000000000, -5.000000000000000000 ) ) ; +#220 = CYLINDRICAL_SURFACE ( 'NONE', #27, 2.500000000000001300 ) ; +#221 = ORIENTED_EDGE ( 'NONE', *, *, #449, .F. ) ; +#222 = CIRCLE ( 'NONE', #46, 2.500000000000001300 ) ; +#223 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#224 = CC_DESIGN_APPROVAL ( #259, ( #362 ) ) ; +#225 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -7.500000000000001800 ) ) ; +#226 = EDGE_CURVE ( 'NONE', #345, #24, #203, .T. ) ; +#227 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#228 = FACE_OUTER_BOUND ( 'NONE', #301, .T. ) ; +#229 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 2.500000000000000000, -5.000000000000000000 ) ) ; +#230 = LINE ( 'NONE', #330, #213 ) ; +#231 = CYLINDRICAL_SURFACE ( 'NONE', #23, 5.000000000000000900 ) ; +#232 = FACE_OUTER_BOUND ( 'NONE', #291, .T. ) ; +#233 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, 2.500000000000000000, -5.000000000000000000 ) ) ; +#234 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#235 = FACE_OUTER_BOUND ( 'NONE', #286, .T. ) ; +#236 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#237 = VECTOR ( 'NONE', #361, 1000.000000000000000 ) ; +#238 = FACE_OUTER_BOUND ( 'NONE', #300, .T. ) ; +#239 = EDGE_CURVE ( 'NONE', #391, #411, #198, .T. ) ; +#240 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#241 = LINE ( 'NONE', #444, #247 ) ; +#242 = ORIENTED_EDGE ( 'NONE', *, *, #146, .T. ) ; +#243 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#244 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#245 = FACE_BOUND ( 'NONE', #303, .T. ) ; +#246 = FACE_OUTER_BOUND ( 'NONE', #294, .T. ) ; +#247 = VECTOR ( 'NONE', #440, 1000.000000000000000 ) ; +#248 = CYLINDRICAL_SURFACE ( 'NONE', #4, 5.000000000000000000 ) ; +#249 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #29 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #88, #78, #73 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#250 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#251 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#252 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ; +#253 = LINE ( 'NONE', #373, #237 ) ; +#254 = CYLINDRICAL_SURFACE ( 'NONE', #12, 2.500000000000001300 ) ; +#255 = FACE_BOUND ( 'NONE', #308, .T. ) ; +#256 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#257 = FACE_OUTER_BOUND ( 'NONE', #299, .T. ) ; +#258 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#259 = APPROVAL ( #37, 'UNSPECIFIED' ) ; +#260 = EDGE_CURVE ( 'NONE', #411, #3, #195, .T. ) ; +#261 = CYLINDRICAL_SURFACE ( 'NONE', #2, 5.000000000000000000 ) ; +#262 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#263 = FACE_OUTER_BOUND ( 'NONE', #307, .T. ) ; +#264 = FACE_OUTER_BOUND ( 'NONE', #290, .T. ) ; +#265 = FACE_OUTER_BOUND ( 'NONE', #296, .T. ) ; +#266 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -5.000000000000000000 ) ) ; +#267 = CYLINDRICAL_SURFACE ( 'NONE', #17, 2.500000000000001300 ) ; +#268 = FACE_OUTER_BOUND ( 'NONE', #287, .T. ) ; +#269 = VECTOR ( 'NONE', #436, 1000.000000000000000 ) ; +#270 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#271 = ORIENTED_EDGE ( 'NONE', *, *, #54, .F. ) ; +#272 = EDGE_CURVE ( 'NONE', #366, #319, #188, .T. ) ; +#273 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#274 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -7.500000000000001800 ) ) ; +#275 = LINE ( 'NONE', #191, #269 ) ; +#276 = FACE_OUTER_BOUND ( 'NONE', #355, .T. ) ; +#277 = VECTOR ( 'NONE', #421, 1000.000000000000000 ) ; +#278 = ORIENTED_EDGE ( 'NONE', *, *, #167, .T. ) ; +#279 = LINE ( 'NONE', #399, #277 ) ; +#280 = EDGE_CURVE ( 'NONE', #24, #391, #186, .T. ) ; +#281 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#282 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#283 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -5.000000000000000000 ) ) ; +#284 = FACE_OUTER_BOUND ( 'NONE', #144, .T. ) ; +#285 = LINE ( 'NONE', #426, #154 ) ; +#286 = EDGE_LOOP ( 'NONE', ( #406, #367, #379, #371 ) ) ; +#287 = EDGE_LOOP ( 'NONE', ( #28, #271, #419, #398 ) ) ; +#288 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#289 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#290 = EDGE_LOOP ( 'NONE', ( #221, #405, #396, #368 ) ) ; +#291 = EDGE_LOOP ( 'NONE', ( #312, #370, #315, #313 ) ) ; +#292 = VERTEX_POINT ( 'NONE', #274 ) ; +#293 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #63, #31, ( #362 ) ) ; +#294 = EDGE_LOOP ( 'NONE', ( #431, #86, #201, #413 ) ) ; +#295 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#296 = EDGE_LOOP ( 'NONE', ( #332, #334, #336, #341, #343 ) ) ; +#297 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#298 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trigger_Spring_Cap', ( #141, #409 ), #249 ) ; +#299 = EDGE_LOOP ( 'NONE', ( #317, #316, #324, #325 ) ) ; +#300 = EDGE_LOOP ( 'NONE', ( #451, #401, #400, #390 ) ) ; +#301 = EDGE_LOOP ( 'NONE', ( #42, #414, #422, #381 ) ) ; +#302 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#303 = EDGE_LOOP ( 'NONE', ( #22, #278, #407, #408, #242 ) ) ; +#304 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ; +#305 = EDGE_CURVE ( 'NONE', #319, #309, #179, .T. ) ; +#306 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#307 = EDGE_LOOP ( 'NONE', ( #359, #360, #363, #364, #412 ) ) ; +#308 = EDGE_LOOP ( 'NONE', ( #346, #347, #351, #353, #354 ) ) ; +#309 = VERTEX_POINT ( 'NONE', #234 ) ; +#310 = DESIGN_CONTEXT ( 'detailed design', #61, 'design' ) ; +#311 = VERTEX_POINT ( 'NONE', #258 ) ; +#312 = ORIENTED_EDGE ( 'NONE', *, *, #425, .T. ) ; +#313 = ORIENTED_EDGE ( 'NONE', *, *, #397, .F. ) ; +#314 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#315 = ORIENTED_EDGE ( 'NONE', *, *, #410, .F. ) ; +#316 = ORIENTED_EDGE ( 'NONE', *, *, #403, .T. ) ; +#317 = ORIENTED_EDGE ( 'NONE', *, *, #369, .F. ) ; +#318 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#319 = VERTEX_POINT ( 'NONE', #233 ) ; +#320 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#321 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -5.000000000000000000 ) ) ; +#322 = VERTEX_POINT ( 'NONE', #229 ) ; +#323 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#324 = ORIENTED_EDGE ( 'NONE', *, *, #280, .T. ) ; +#325 = ORIENTED_EDGE ( 'NONE', *, *, #208, .F. ) ; +#326 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#327 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #76, #40, ( #362 ) ) ; +#328 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#329 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#330 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#331 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#332 = ORIENTED_EDGE ( 'NONE', *, *, #438, .T. ) ; +#333 = VERTEX_POINT ( 'NONE', #223 ) ; +#334 = ORIENTED_EDGE ( 'NONE', *, *, #131, .T. ) ; +#335 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#336 = ORIENTED_EDGE ( 'NONE', *, *, #404, .T. ) ; +#337 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#338 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#339 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#340 = DIRECTION ( 'NONE', ( 1.734723475976807100E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#341 = ORIENTED_EDGE ( 'NONE', *, *, #369, .T. ) ; +#342 = EDGE_CURVE ( 'NONE', #309, #448, #180, .T. ) ; +#343 = ORIENTED_EDGE ( 'NONE', *, *, #387, .T. ) ; +#344 = PLANE ( 'NONE', #41 ) ; +#345 = VERTEX_POINT ( 'NONE', #219 ) ; +#346 = ORIENTED_EDGE ( 'NONE', *, *, #372, .F. ) ; +#347 = ORIENTED_EDGE ( 'NONE', *, *, #342, .F. ) ; +#348 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#349 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 1.734723475976807100E-016 ) ) ; +#350 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#351 = ORIENTED_EDGE ( 'NONE', *, *, #305, .F. ) ; +#352 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#353 = ORIENTED_EDGE ( 'NONE', *, *, #272, .F. ) ; +#354 = ORIENTED_EDGE ( 'NONE', *, *, #425, .F. ) ; +#355 = EDGE_LOOP ( 'NONE', ( #418, #420, #424, #394 ) ) ; +#356 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#357 = PLANE ( 'NONE', #30 ) ; +#358 = VERTEX_POINT ( 'NONE', #214 ) ; +#359 = ORIENTED_EDGE ( 'NONE', *, *, #260, .F. ) ; +#360 = ORIENTED_EDGE ( 'NONE', *, *, #239, .F. ) ; +#361 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#362 = SECURITY_CLASSIFICATION ( '', '', #43 ) ; +#363 = ORIENTED_EDGE ( 'NONE', *, *, #280, .F. ) ; +#364 = ORIENTED_EDGE ( 'NONE', *, *, #226, .F. ) ; +#365 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 0.0000000000000000000, -2.888894916580853800E-031 ) ) ; +#366 = VERTEX_POINT ( 'NONE', #225 ) ; +#367 = ORIENTED_EDGE ( 'NONE', *, *, #36, .F. ) ; +#368 = ORIENTED_EDGE ( 'NONE', *, *, #156, .F. ) ; +#369 = EDGE_CURVE ( 'NONE', #358, #432, #173, .T. ) ; +#370 = ORIENTED_EDGE ( 'NONE', *, *, #449, .T. ) ; +#371 = ORIENTED_EDGE ( 'NONE', *, *, #68, .T. ) ; +#372 = EDGE_CURVE ( 'NONE', #448, #322, #182, .T. ) ; +#373 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#374 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#375 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#376 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ; +#377 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#378 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#379 = ORIENTED_EDGE ( 'NONE', *, *, #305, .T. ) ; +#380 = PLANE ( 'NONE', #8 ) ; +#381 = ORIENTED_EDGE ( 'NONE', *, *, #208, .T. ) ; +#382 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#383 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#384 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#385 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#386 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#387 = EDGE_CURVE ( 'NONE', #432, #139, #172, .T. ) ; +#388 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#389 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ; +#390 = ORIENTED_EDGE ( 'NONE', *, *, #107, .T. ) ; +#391 = VERTEX_POINT ( 'NONE', #178 ) ; +#392 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#393 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#394 = ORIENTED_EDGE ( 'NONE', *, *, #54, .T. ) ; +#395 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #81, #45, ( #26 ) ) ; +#396 = ORIENTED_EDGE ( 'NONE', *, *, #36, .T. ) ; +#397 = EDGE_CURVE ( 'NONE', #322, #402, #181, .T. ) ; +#398 = ORIENTED_EDGE ( 'NONE', *, *, #397, .T. ) ; +#399 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, 2.500000000000000000, -5.000000000000000000 ) ) ; +#400 = ORIENTED_EDGE ( 'NONE', *, *, #438, .F. ) ; +#401 = ORIENTED_EDGE ( 'NONE', *, *, #138, .F. ) ; +#402 = VERTEX_POINT ( 'NONE', #161 ) ; +#403 = EDGE_CURVE ( 'NONE', #358, #24, #159, .T. ) ; +#404 = EDGE_CURVE ( 'NONE', #430, #358, #163, .T. ) ; +#405 = ORIENTED_EDGE ( 'NONE', *, *, #272, .T. ) ; +#406 = ORIENTED_EDGE ( 'NONE', *, *, #146, .F. ) ; +#407 = ORIENTED_EDGE ( 'NONE', *, *, #410, .T. ) ; +#408 = ORIENTED_EDGE ( 'NONE', *, *, #156, .T. ) ; +#409 = AXIS2_PLACEMENT_3D ( 'NONE', #93, #132, #67 ) ; +#410 = EDGE_CURVE ( 'NONE', #402, #292, #166, .T. ) ; +#411 = VERTEX_POINT ( 'NONE', #155 ) ; +#412 = ORIENTED_EDGE ( 'NONE', *, *, #190, .F. ) ; +#413 = ORIENTED_EDGE ( 'NONE', *, *, #138, .T. ) ; +#414 = ORIENTED_EDGE ( 'NONE', *, *, #107, .F. ) ; +#415 = VERTEX_POINT ( 'NONE', #137 ) ; +#416 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#417 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -10.00000000000000000 ) ) ; +#418 = ORIENTED_EDGE ( 'NONE', *, *, #176, .F. ) ; +#419 = ORIENTED_EDGE ( 'NONE', *, *, #372, .T. ) ; +#420 = ORIENTED_EDGE ( 'NONE', *, *, #68, .F. ) ; +#421 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#422 = ORIENTED_EDGE ( 'NONE', *, *, #387, .F. ) ; +#423 = APPROVAL ( #48, 'UNSPECIFIED' ) ; +#424 = ORIENTED_EDGE ( 'NONE', *, *, #342, .T. ) ; +#425 = EDGE_CURVE ( 'NONE', #322, #366, #157, .T. ) ; +#426 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#427 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#428 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#429 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#430 = VERTEX_POINT ( 'NONE', #128 ) ; +#431 = ORIENTED_EDGE ( 'NONE', *, *, #190, .T. ) ; +#432 = VERTEX_POINT ( 'NONE', #152 ) ; +#433 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#434 = PLANE ( 'NONE', #19 ) ; +#435 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ; +#436 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#437 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#438 = EDGE_CURVE ( 'NONE', #139, #333, #153, .T. ) ; +#439 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#440 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#441 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#442 = ORIENTED_EDGE ( 'NONE', *, *, #404, .F. ) ; +#443 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.734723475976807100E-016 ) ) ; +#444 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ; +#445 = DIRECTION ( 'NONE', ( 1.734723475976807100E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#446 = ORIENTED_EDGE ( 'NONE', *, *, #403, .F. ) ; +#447 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #124, #57, ( #21 ) ) ; +#448 = VERTEX_POINT ( 'NONE', #122 ) ; +#449 = EDGE_CURVE ( 'NONE', #366, #292, #151, .T. ) ; +#450 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#451 = ORIENTED_EDGE ( 'NONE', *, *, #260, .T. ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STL/Barrel.stl b/Firearms/The_Experiment_Remake-RollaTroll/STL/Barrel.stl new file mode 100644 index 0000000..c9f6589 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/STL/Barrel.stl differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STL/Body.stl b/Firearms/The_Experiment_Remake-RollaTroll/STL/Body.stl new file mode 100644 index 0000000..e4fdcf3 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/STL/Body.stl differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STL/Hammer_Body.stl b/Firearms/The_Experiment_Remake-RollaTroll/STL/Hammer_Body.stl new file mode 100644 index 0000000..909b68c Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/STL/Hammer_Body.stl differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STL/Hammer_Slide.stl b/Firearms/The_Experiment_Remake-RollaTroll/STL/Hammer_Slide.stl new file mode 100644 index 0000000..cbdae5d Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/STL/Hammer_Slide.stl differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STL/Handle.stl b/Firearms/The_Experiment_Remake-RollaTroll/STL/Handle.stl new file mode 100644 index 0000000..6c56f46 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/STL/Handle.stl differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STL/Long_Hammer_Slide_Pin.stl b/Firearms/The_Experiment_Remake-RollaTroll/STL/Long_Hammer_Slide_Pin.stl new file mode 100644 index 0000000..307e06f Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/STL/Long_Hammer_Slide_Pin.stl differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STL/Short_Hammer_Slide_Pin.stl b/Firearms/The_Experiment_Remake-RollaTroll/STL/Short_Hammer_Slide_Pin.stl new file mode 100644 index 0000000..f616abc Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/STL/Short_Hammer_Slide_Pin.stl differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STL/Trigger.stl b/Firearms/The_Experiment_Remake-RollaTroll/STL/Trigger.stl new file mode 100644 index 0000000..f2eab5b Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/STL/Trigger.stl differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STL/Trigger_Guard.stl b/Firearms/The_Experiment_Remake-RollaTroll/STL/Trigger_Guard.stl new file mode 100644 index 0000000..376c3e9 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/STL/Trigger_Guard.stl differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STL/Trigger_Guide.stl b/Firearms/The_Experiment_Remake-RollaTroll/STL/Trigger_Guide.stl new file mode 100644 index 0000000..80f4d99 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/STL/Trigger_Guide.stl differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STL/Trigger_Spring.stl b/Firearms/The_Experiment_Remake-RollaTroll/STL/Trigger_Spring.stl new file mode 100644 index 0000000..9dcd7c7 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/STL/Trigger_Spring.stl differ diff --git a/Firearms/The_Experiment_Remake-RollaTroll/STL/Trigger_Spring_Cap.stl b/Firearms/The_Experiment_Remake-RollaTroll/STL/Trigger_Spring_Cap.stl new file mode 100644 index 0000000..d374280 Binary files /dev/null and b/Firearms/The_Experiment_Remake-RollaTroll/STL/Trigger_Spring_Cap.stl differ