Upgrading Trantor R224 to version 1.25 by neomohist.

Firearms/Trantor_R224_v1.2-neomohist/README.md

@@ -1,17 +0,0 @@
-# Trantor Revolver 224
-
-#### Version
-v1.2
-
-#### Description
-
-This system was designed as a research tool. If fabricated, be aware of local laws. For additional assembly information, see enclosed picture files. 5 frame pins are required, as well as glue.  
-
-Formats included are STL, DXF, STEP, and SLDPRT. 
-
-#### Notes
-Simulations indicate that .22 Short may function, but more than one use of .22 LR may cause deformation. For more information, see "Simulated Testing of a 3D Printed Revolver Cylinder" by J LaRocco, 2013 (http://www.peerevaluation.org/read/libraryID:29812)
-
-#### Disclaimer: 
-For US legal requirements, a piece of metal can be epoxied into the space above the trigger (within the frame), and beneath the mainspring. Also be aware of individual state laws. Likewise, components can be made out of metal instead of polymers. A nail (perhaps an 8d/10 gauge or 10d/9 gauge one) can be inserted in the tube above the system for use as a firing pin. Again, no warranty is issued. All usage is done at individual risk.
-

Firearms/Trantor_R224_v1.25-neomohist/README.md

@@ -0,0 +1,19 @@
+# Trantor Trantor Revolver 224
+
+#### Version
+v1.25
+
+#### Description
+
+A nail (perhaps an 8d/10 gauge or 10d/9 gauge one) can be inserted in the tube above the system for use as a firing pin. For additional assembly information, see enclosed picture files. 5 frame pins are required, as well as glue.  Formats included are STL, DXF, STEP, and SLDPRT. 
+
+#### Notes
+Simulations indicate that .22 Short may function, but more than one use of .22 LR may cause deformation. For more information, see "Simulated Testing of a 3D Printed Revolver Cylinder" by J LaRocco, 2013 (http://www.peerevaluation.org/read/libraryID:29812)
+
+
+#### Disclaimer
+
+Trantor 224 v.1.25 is released under a GPL license for research and non-profit use. No warranty of any sort is issued. For US legal requirements, a piece of metal can be epoxied into the space above the trigger (within the frame), and beneath the mainspring. Also be aware of individual state laws.  This system was designed as a research tool. If fabricated, be aware of local laws. Likewise, components can be made out of metal instead of polymers. Again, no warranty is issued. All usage is done at individual risk. 
+
+
+