Adding the Sacramento (.22lr) Pistol by Caboose.

Firearms/Sacramento_Pistol-Caboose/README.md

@@ -0,0 +1,21 @@
+# The Sacramento Pistol
+
+
+#### Description
+
+
+I decided to design and print my own legal 3d printed gun. There was a noticeable lack of 3d printed guns chambered in .22LR. The Reppringer was the obvious choice to copy, but it ended up being a weak design with flaws, mainly, the trigger would have to rest in the palm of one's hand, and there was no place for the 3.7oz or more of metal I would need to include to make it legal. 
+
+My first step was to decide on a plasic or metal barrel. I decided to pick an old style Ruger Single Six revolver barrel, in .22LR. If you know anything about revolver barrels you know they have no chamber, so I knew I would be making my own. I opted to use some brass pipe, not super strong, but enough, as the chamber. 
+
+I made the barrel attach to the brass pipe by way of a 3d printed barrel assembly, with lugs on the end to attach to upper reciever of the gun. The forward reciever also contains a removable front sight post, which is a contrast sight. Just add 1.75mm filament to the center and bam. Rear sight acts the same way. Pictures show it best! 
+
+The upper reciever contains the striker mechanism. It also holds the trigger in place. It is worth while to note all hardware consists of only 3 x 20mm, and 1 x 10mm M3 bolts (with nuts). The upper reciever also holds the rear sight and is fully removable. I might make different sight designs in the future. 
+
+Trigger and sear are relatively standard. Sear is built into the lower reciever (which contains the required metal, permanently attached), while trigger as mentioned, is attached to the upper reciever. A small spring is also in the grip of the receiver which allows the sear to be pushed up and hold the bolt back. The bolt is simply a small piece of plastic with a charging handle integrated, with a screw through the metal. Screw is obviously rounded to act as a better firing pin. 
+
+Lower receiver slides onto the upper receiver and is held in place by one M3 bolt at the rear of the gun. There is also a finger rest and some groves so the user does not lose grip. Finally, the 1.5x1x1" piece of steel resides in the lower to allow it to conform to the Undetectable firearms act. This steel piece balances the gun quite well with the 6" Ruger barrel. Please note pictures show barrel with old style assembly, which works fine. Hex barrel assembly is for easy removal. 
+
+I have not gotten around to a live fire testing, and my only worry now is the brass pipe chamber is too weak, as the tensile strength is not a whole ton better than ABS, so I plan to replace it with steel, or even mill a chamber into the Ruger barrel. Time will tell. For now I have something relatively inexpensive. 
+
+All parts printed 100% infill, 0 shells, on a Makerbot Replicator. 

Firearms/Sacramento_Pistol-Caboose/STEP/FrontSight^StikM1.STEP

@@ -0,0 +1,359 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('FrontSight^StikM1.STEP',
+    '2013-09-01T22:38:39',
+    ( 'Asher' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = CYLINDRICAL_SURFACE ( 'NONE', #157, 0.9999999999999991100 ) ;
+#2 = CARTESIAN_POINT ( 'NONE',  ( 11.85058935189833400, 38.29207333025046700, 0.0000000000000000000 ) ) ;
+#3 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#4 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#5 = VECTOR ( 'NONE', #192, 1000.000000000000000 ) ;
+#6 = FACE_OUTER_BOUND ( 'NONE', #269, .T. ) ;
+#7 = CARTESIAN_POINT ( 'NONE',  ( 9.350589351898332100, 35.79207333025047400, 5.000000000000000000 ) ) ;
+#8 = DIRECTION ( 'NONE',  ( 0.5000000000000209800, -0.8660254037844265000, 0.0000000000000000000 ) ) ;
+#9 = AXIS2_PLACEMENT_3D ( 'NONE', #80, #54, #87 ) ;
+#10 = VECTOR ( 'NONE', #276, 1000.000000000000000 ) ;
+#11 = LINE ( 'NONE', #94, #62 ) ;
+#12 = LINE ( 'NONE', #95, #10 ) ;
+#13 = LINE ( 'NONE', #333, #22 ) ;
+#14 = AXIS2_PLACEMENT_3D ( 'NONE', #336, #280, #17 ) ;
+#15 = EDGE_CURVE ( 'NONE', #273, #265, #84, .T. ) ;
+#16 = VECTOR ( 'NONE', #311, 1000.000000000000200 ) ;
+#17 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#18 = PLANE ( 'NONE',  #240 ) ;
+#19 = PLANE ( 'NONE',  #292 ) ;
+#20 = LINE ( 'NONE', #242, #16 ) ;
+#21 = LINE ( 'NONE', #161, #27 ) ;
+#22 = VECTOR ( 'NONE', #26, 1000.000000000000000 ) ;
+#23 = CARTESIAN_POINT ( 'NONE',  ( 14.35058935189833400, 35.79207333025037500, 5.000000000000000000 ) ) ;
+#24 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#25 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#26 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#27 = VECTOR ( 'NONE', #66, 1000.000000000000000 ) ;
+#28 = CARTESIAN_POINT ( 'NONE',  ( 7.850589351898348900, 33.19399711889718000, 5.000000000000000000 ) ) ;
+#29 = CARTESIAN_POINT ( 'NONE',  ( 14.35058935189833400, 35.79207333025037500, 5.000000000000000000 ) ) ;
+#30 = PLANE ( 'NONE',  #263 ) ;
+#31 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#32 = VECTOR ( 'NONE', #160, 1000.000000000000000 ) ;
+#33 = LINE ( 'NONE', #187, #5 ) ;
+#34 = FACE_BOUND ( 'NONE', #275, .T. ) ;
+#35 = CARTESIAN_POINT ( 'NONE',  ( 15.85058935189835000, 33.19399711889718000, 5.000000000000000000 ) ) ;
+#36 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#37 = AXIS2_PLACEMENT_3D ( 'NONE', #315, #197, #224 ) ;
+#38 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#39 = VECTOR ( 'NONE', #285, 1000.000000000000000 ) ;
+#40 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#41 = CIRCLE ( 'NONE', #14, 0.9999999999999991100 ) ;
+#42 = VECTOR ( 'NONE', #130, 1000.000000000000000 ) ;
+#43 = FACE_OUTER_BOUND ( 'NONE', #328, .T. ) ;
+#44 = LINE ( 'NONE', #132, #42 ) ;
+#45 = AXIS2_PLACEMENT_3D ( 'NONE', #106, #110, #112 ) ;
+#46 = EDGE_CURVE ( 'NONE', #241, #237, #252, .T. ) ;
+#47 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#48 = MANIFOLD_SOLID_BREP ( 'Cut-Extrude1', #202 ) ;
+#49 = CARTESIAN_POINT ( 'NONE',  ( 14.35058935189833400, 40.79207333025047400, 0.0000000000000000000 ) ) ;
+#50 = CIRCLE ( 'NONE', #37, 0.9999999999999991100 ) ;
+#51 = DIRECTION ( 'NONE',  ( -0.8660254037844391500, 0.4999999999999992200, 0.0000000000000000000 ) ) ;
+#52 = DIRECTION ( 'NONE',  ( -0.4999999999999991700, -0.8660254037844390400, 0.0000000000000000000 ) ) ;
+#53 = CARTESIAN_POINT ( 'NONE',  ( 11.85058935189833400, 38.29207333025046700, -5.000000000000000000 ) ) ;
+#54 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#55 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'FrontSight^StikM1', ( #48, #243 ), #152 ) ;
+#56 = DIRECTION ( 'NONE',  ( 0.8660254037844266100, 0.5000000000000208700, -0.0000000000000000000 ) ) ;
+#57 = AXIS2_PLACEMENT_3D ( 'NONE', #188, #190, #191 ) ;
+#58 = SHAPE_DEFINITION_REPRESENTATION ( #259, #55 ) ;
+#59 = EDGE_CURVE ( 'NONE', #170, #207, #44, .T. ) ;
+#60 = FACE_OUTER_BOUND ( 'NONE', #307, .T. ) ;
+#61 = PRESENTATION_STYLE_ASSIGNMENT (( #102 ) ) ;
+#62 = VECTOR ( 'NONE', #222, 1000.000000000000000 ) ;
+#63 = SURFACE_SIDE_STYLE ('',( #64 ) ) ;
+#64 = SURFACE_STYLE_FILL_AREA ( #257 ) ;
+#65 = LINE ( 'NONE', #313, #39 ) ;
+#66 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#67 = CARTESIAN_POINT ( 'NONE',  ( 14.35058935189833400, 35.79207333025037500, 5.000000000000000000 ) ) ;
+#68 = VECTOR ( 'NONE', #264, 1000.000000000000100 ) ;
+#69 = LINE ( 'NONE', #258, #32 ) ;
+#70 = CIRCLE ( 'NONE', #186, 0.9999999999999991100 ) ;
+#71 = EDGE_CURVE ( 'NONE', #204, #174, #65, .T. ) ;
+#72 = EDGE_CURVE ( 'NONE', #241, #122, #69, .T. ) ;
+#73 = CARTESIAN_POINT ( 'NONE',  ( 14.35058935189833400, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#74 = PLANE ( 'NONE',  #316 ) ;
+#75 = CARTESIAN_POINT ( 'NONE',  ( 12.85058935189833200, 38.29207333025046700, 5.000000000000000000 ) ) ;
+#76 = AXIS2_PLACEMENT_3D ( 'NONE', #108, #131, #133 ) ;
+#77 = DIRECTION ( 'NONE',  ( -0.5000000000000208700, 0.8660254037844266100, 0.0000000000000000000 ) ) ;
+#78 = ORIENTED_EDGE ( 'NONE', *, *, #113, .F. ) ;
+#79 = VECTOR ( 'NONE', #260, 1000.000000000000000 ) ;
+#80 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ;
+#81 = FACE_OUTER_BOUND ( 'NONE', #248, .T. ) ;
+#82 = EDGE_CURVE ( 'NONE', #262, #265, #41, .T. ) ;
+#83 = PLANE ( 'NONE',  #9 ) ;
+#84 = LINE ( 'NONE', #247, #79 ) ;
+#85 = CARTESIAN_POINT ( 'NONE',  ( 7.850589351898348900, 33.19399711889718000, 0.0000000000000000000 ) ) ;
+#86 = COLOUR_RGB ( '',0.6941176470588235100, 0.09411764705882352800, 0.09411764705882352800 ) ;
+#87 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#88 = PLANE ( 'NONE',  #76 ) ;
+#89 = VERTEX_POINT ( 'NONE', #98 ) ;
+#90 = EDGE_LOOP ( 'NONE', ( #123, #118, #91, #103 ) ) ;
+#91 = ORIENTED_EDGE ( 'NONE', *, *, #206, .F. ) ;
+#92 = EDGE_CURVE ( 'NONE', #204, #207, #20, .T. ) ;
+#93 = ORIENTED_EDGE ( 'NONE', *, *, #322, .F. ) ;
+#94 = CARTESIAN_POINT ( 'NONE',  ( 9.350589351898332100, 35.79207333025047400, 0.0000000000000000000 ) ) ;
+#95 = CARTESIAN_POINT ( 'NONE',  ( 10.85058935189833400, 38.29207333025046700, -5.000000000000000000 ) ) ;
+#96 = ORIENTED_EDGE ( 'NONE', *, *, #172, .F. ) ;
+#97 = LINE ( 'NONE', #73, #274 ) ;
+#98 = CARTESIAN_POINT ( 'NONE',  ( 9.350589351898332100, 35.79207333025047400, 0.0000000000000000000 ) ) ;
+#99 = CARTESIAN_POINT ( 'NONE',  ( 15.85058935189835000, 33.19399711889718000, 5.000000000000000000 ) ) ;
+#100 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#101 = PLANE ( 'NONE',  #45 ) ;
+#102 = SURFACE_STYLE_USAGE ( .BOTH. , #63 ) ;
+#103 = ORIENTED_EDGE ( 'NONE', *, *, #121, .T. ) ;
+#104 = DIRECTION ( 'NONE',  ( 0.4999999999999991700, 0.8660254037844390400, 0.0000000000000000000 ) ) ;
+#105 = CARTESIAN_POINT ( 'NONE',  ( 9.350589351898332100, 40.79207333025047400, 0.0000000000000000000 ) ) ;
+#106 = CARTESIAN_POINT ( 'NONE',  ( 9.350589351898332100, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#107 = CARTESIAN_POINT ( 'NONE',  ( 7.850589351898348900, 33.19399711889718000, 5.000000000000000000 ) ) ;
+#108 = CARTESIAN_POINT ( 'NONE',  ( 14.35058935189833400, 35.79207333025037500, 5.000000000000000000 ) ) ;
+#109 = CARTESIAN_POINT ( 'NONE',  ( 10.85058935189833400, 38.29207333025046700, 5.000000000000000000 ) ) ;
+#110 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#111 = ORIENTED_EDGE ( 'NONE', *, *, #59, .T. ) ;
+#112 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#113 = EDGE_CURVE ( 'NONE', #237, #89, #21, .T. ) ;
+#114 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #228, 'design' ) ;
+#115 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#116 = ORIENTED_EDGE ( 'NONE', *, *, #72, .F. ) ;
+#117 = EDGE_CURVE ( 'NONE', #235, #262, #12, .T. ) ;
+#118 = ORIENTED_EDGE ( 'NONE', *, *, #281, .F. ) ;
+#119 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#120 = AXIS2_PLACEMENT_3D ( 'NONE', #53, #40, #47 ) ;
+#121 = EDGE_CURVE ( 'NONE', #158, #204, #33, .T. ) ;
+#122 = VERTEX_POINT ( 'NONE', #213 ) ;
+#123 = ORIENTED_EDGE ( 'NONE', *, *, #71, .T. ) ;
+#124 = LINE ( 'NONE', #278, #232 ) ;
+#125 = EDGE_CURVE ( 'NONE', #89, #286, #11, .T. ) ;
+#126 = CARTESIAN_POINT ( 'NONE',  ( 9.350589351898332100, 35.79207333025047400, 5.000000000000000000 ) ) ;
+#127 = ORIENTED_EDGE ( 'NONE', *, *, #92, .F. ) ;
+#128 = EDGE_LOOP ( 'NONE', ( #300, #271 ) ) ;
+#129 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #216, 'distance_accuracy_value', 'NONE');
+#130 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#131 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#132 = CARTESIAN_POINT ( 'NONE',  ( 15.85058935189835000, 33.19399711889718000, 5.000000000000000000 ) ) ;
+#133 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#134 = CARTESIAN_POINT ( 'NONE',  ( 11.85058935189833400, 38.29207333025046700, -5.000000000000000000 ) ) ;
+#135 = ORIENTED_EDGE ( 'NONE', *, *, #148, .T. ) ;
+#136 = ORIENTED_EDGE ( 'NONE', *, *, #326, .F. ) ;
+#137 = CARTESIAN_POINT ( 'NONE',  ( 12.85058935189833200, 38.29207333025046700, 0.0000000000000000000 ) ) ;
+#138 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#139 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#140 = CARTESIAN_POINT ( 'NONE',  ( 10.85058935189833400, 38.29207333025046700, 0.0000000000000000000 ) ) ;
+#141 = ORIENTED_EDGE ( 'NONE', *, *, #125, .F. ) ;
+#142 = ORIENTED_EDGE ( 'NONE', *, *, #287, .T. ) ;
+#143 = FACE_OUTER_BOUND ( 'NONE', #90, .T. ) ;
+#144 = PLANE ( 'NONE',  #182 ) ;
+#145 = ORIENTED_EDGE ( 'NONE', *, *, #172, .T. ) ;
+#146 = ORIENTED_EDGE ( 'NONE', *, *, #121, .F. ) ;
+#147 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#148 = EDGE_CURVE ( 'NONE', #207, #122, #13, .T. ) ;
+#149 = ORIENTED_EDGE ( 'NONE', *, *, #59, .F. ) ;
+#150 = ORIENTED_EDGE ( 'NONE', *, *, #72, .T. ) ;
+#151 = VECTOR ( 'NONE', #104, 1000.000000000000100 ) ;
+#152 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #251 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #193, #195, #196 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#153 = ORIENTED_EDGE ( 'NONE', *, *, #303, .T. ) ;
+#154 = ORIENTED_EDGE ( 'NONE', *, *, #71, .F. ) ;
+#155 = VECTOR ( 'NONE', #226, 1000.000000000000000 ) ;
+#156 = PRESENTATION_STYLE_ASSIGNMENT (( #214 ) ) ;
+#157 = AXIS2_PLACEMENT_3D ( 'NONE', #134, #115, #119 ) ;
+#158 = VERTEX_POINT ( 'NONE', #23 ) ;
+#159 = ORIENTED_EDGE ( 'NONE', *, *, #46, .T. ) ;
+#160 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#161 = CARTESIAN_POINT ( 'NONE',  ( 9.350589351898332100, 35.79207333025047400, 5.000000000000000000 ) ) ;
+#162 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#163 = CARTESIAN_POINT ( 'NONE',  ( 9.350589351898332100, 40.79207333025047400, 0.0000000000000000000 ) ) ;
+#164 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#165 = ORIENTED_EDGE ( 'NONE', *, *, #322, .T. ) ;
+#166 = CARTESIAN_POINT ( 'NONE',  ( 9.350589351898332100, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#167 = FILL_AREA_STYLE_COLOUR ( '', #86 ) ;
+#168 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#169 = EDGE_CURVE ( 'NONE', #237, #331, #283, .T. ) ;
+#170 = VERTEX_POINT ( 'NONE', #335 ) ;
+#171 = CARTESIAN_POINT ( 'NONE',  ( 9.350589351898332100, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#172 = EDGE_CURVE ( 'NONE', #331, #286, #124, .T. ) ;
+#173 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #254 ) ) ;
+#174 = VERTEX_POINT ( 'NONE', #49 ) ;
+#175 = EDGE_CURVE ( 'NONE', #265, #262, #50, .T. ) ;
+#176 = EDGE_LOOP ( 'NONE', ( #298, #181, #194, #327 ) ) ;
+#177 = CYLINDRICAL_SURFACE ( 'NONE', #120, 0.9999999999999991100 ) ;
+#178 = SURFACE_STYLE_FILL_AREA ( #201 ) ;
+#179 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#180 = FILL_AREA_STYLE_COLOUR ( '', #321 ) ;
+#181 = ORIENTED_EDGE ( 'NONE', *, *, #117, .T. ) ;
+#182 = AXIS2_PLACEMENT_3D ( 'NONE', #139, #138, #162 ) ;
+#183 = ORIENTED_EDGE ( 'NONE', *, *, #303, .F. ) ;
+#184 = ORIENTED_EDGE ( 'NONE', *, *, #82, .F. ) ;
+#185 = FACE_OUTER_BOUND ( 'NONE', #219, .T. ) ;
+#186 = AXIS2_PLACEMENT_3D ( 'NONE', #2, #3, #4 ) ;
+#187 = CARTESIAN_POINT ( 'NONE',  ( 14.35058935189833400, 35.79207333025037500, 5.000000000000000000 ) ) ;
+#188 = CARTESIAN_POINT ( 'NONE',  ( 11.85058935189833400, 38.29207333025046700, 0.0000000000000000000 ) ) ;
+#189 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #254, .NOT_KNOWN. ) ;
+#190 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#191 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#192 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#193 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#194 = ORIENTED_EDGE ( 'NONE', *, *, #82, .T. ) ;
+#195 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#196 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#197 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#198 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #199 ) ;
+#199 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#200 = ORIENTED_EDGE ( 'NONE', *, *, #148, .F. ) ;
+#201 = FILL_AREA_STYLE ('',( #180 ) ) ;
+#202 = CLOSED_SHELL ( 'NONE', ( #297, #294, #296, #295, #301, #308, #305, #302, #310, #309 ) ) ;
+#203 = SURFACE_SIDE_STYLE ('',( #178 ) ) ;
+#204 = VERTEX_POINT ( 'NONE', #339 ) ;
+#205 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #189, #114 ) ;
+#206 = EDGE_CURVE ( 'NONE', #158, #253, #220, .T. ) ;
+#207 = VERTEX_POINT ( 'NONE', #249 ) ;
+#208 = ORIENTED_EDGE ( 'NONE', *, *, #282, .T. ) ;
+#209 = LINE ( 'NONE', #29, #245 ) ;
+#210 = ORIENTED_EDGE ( 'NONE', *, *, #326, .T. ) ;
+#211 = ORIENTED_EDGE ( 'NONE', *, *, #175, .F. ) ;
+#212 = LINE ( 'NONE', #85, #151 ) ;
+#213 = CARTESIAN_POINT ( 'NONE',  ( 7.850589351898348900, 33.19399711889718000, 0.0000000000000000000 ) ) ;
+#214 = SURFACE_STYLE_USAGE ( .BOTH. , #203 ) ;
+#215 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#216 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#217 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#218 = ORIENTED_EDGE ( 'NONE', *, *, #117, .F. ) ;
+#219 = EDGE_LOOP ( 'NONE', ( #293, #116, #159, #236 ) ) ;
+#220 = LINE ( 'NONE', #319, #155 ) ;
+#221 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#222 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#223 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#224 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#225 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#226 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#227 = PRODUCT_CONTEXT ( 'NONE', #199, 'mechanical' ) ;
+#228 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#229 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #323 ) ) ;
+#230 = ORIENTED_EDGE ( 'NONE', *, *, #169, .F. ) ;
+#231 = EDGE_LOOP ( 'NONE', ( #127, #146, #142, #111 ) ) ;
+#232 = VECTOR ( 'NONE', #250, 1000.000000000000000 ) ;
+#233 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #228 ) ;
+#234 = VECTOR ( 'NONE', #168, 1000.000000000000000 ) ;
+#235 = VERTEX_POINT ( 'NONE', #140 ) ;
+#236 = ORIENTED_EDGE ( 'NONE', *, *, #113, .T. ) ;
+#237 = VERTEX_POINT ( 'NONE', #284 ) ;
+#238 = VECTOR ( 'NONE', #277, 1000.000000000000000 ) ;
+#239 = LINE ( 'NONE', #166, #234 ) ;
+#240 = AXIS2_PLACEMENT_3D ( 'NONE', #7, #24, #25 ) ;
+#241 = VERTEX_POINT ( 'NONE', #107 ) ;
+#242 = CARTESIAN_POINT ( 'NONE',  ( 14.35058935189833400, 35.79207333025037500, 0.0000000000000000000 ) ) ;
+#243 = AXIS2_PLACEMENT_3D ( 'NONE', #179, #223, #225 ) ;
+#244 = ORIENTED_EDGE ( 'NONE', *, *, #304, .T. ) ;
+#245 = VECTOR ( 'NONE', #8, 1000.000000000000200 ) ;
+#246 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#247 = CARTESIAN_POINT ( 'NONE',  ( 12.85058935189833200, 38.29207333025046700, -5.000000000000000000 ) ) ;
+#248 = EDGE_LOOP ( 'NONE', ( #93, #96, #210, #255 ) ) ;
+#249 = CARTESIAN_POINT ( 'NONE',  ( 15.85058935189835000, 33.19399711889718000, 0.0000000000000000000 ) ) ;
+#250 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#251 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #193, 'distance_accuracy_value', 'NONE');
+#252 = LINE ( 'NONE', #330, #68 ) ;
+#253 = VERTEX_POINT ( 'NONE', #341 ) ;
+#254 = PRODUCT ( 'FrontSight^StikM1', 'FrontSight^StikM1', '', ( #227 ) ) ;
+#255 = ORIENTED_EDGE ( 'NONE', *, *, #281, .T. ) ;
+#256 = CIRCLE ( 'NONE', #57, 0.9999999999999991100 ) ;
+#257 = FILL_AREA_STYLE ('',( #167 ) ) ;
+#258 = CARTESIAN_POINT ( 'NONE',  ( 7.850589351898348900, 33.19399711889718000, 5.000000000000000000 ) ) ;
+#259 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #205 ) ;
+#260 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#261 = ORIENTED_EDGE ( 'NONE', *, *, #46, .F. ) ;
+#262 = VERTEX_POINT ( 'NONE', #109 ) ;
+#263 = AXIS2_PLACEMENT_3D ( 'NONE', #28, #51, #52 ) ;
+#264 = DIRECTION ( 'NONE',  ( 0.4999999999999991700, 0.8660254037844390400, 0.0000000000000000000 ) ) ;
+#265 = VERTEX_POINT ( 'NONE', #75 ) ;
+#266 = FACE_BOUND ( 'NONE', #128, .T. ) ;
+#267 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #320 ), #279 ) ;
+#268 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #323 ), #337 ) ;
+#269 = EDGE_LOOP ( 'NONE', ( #230, #261, #183, #288, #317, #136 ) ) ;
+#270 = ORIENTED_EDGE ( 'NONE', *, *, #175, .T. ) ;
+#271 = ORIENTED_EDGE ( 'NONE', *, *, #282, .F. ) ;
+#272 = VECTOR ( 'NONE', #100, 1000.000000000000000 ) ;
+#273 = VERTEX_POINT ( 'NONE', #137 ) ;
+#274 = VECTOR ( 'NONE', #31, 1000.000000000000000 ) ;
+#275 = EDGE_LOOP ( 'NONE', ( #211, #184 ) ) ;
+#276 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#277 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#278 = CARTESIAN_POINT ( 'NONE',  ( 9.350589351898332100, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#279 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #129 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #216, #217, #221 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#280 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#281 = EDGE_CURVE ( 'NONE', #253, #174, #97, .T. ) ;
+#282 = EDGE_CURVE ( 'NONE', #235, #273, #70, .T. ) ;
+#283 = LINE ( 'NONE', #126, #238 ) ;
+#284 = CARTESIAN_POINT ( 'NONE',  ( 9.350589351898332100, 35.79207333025047400, 5.000000000000000000 ) ) ;
+#285 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#286 = VERTEX_POINT ( 'NONE', #105 ) ;
+#287 = EDGE_CURVE ( 'NONE', #158, #170, #209, .T. ) ;
+#288 = ORIENTED_EDGE ( 'NONE', *, *, #287, .F. ) ;
+#289 = ORIENTED_EDGE ( 'NONE', *, *, #92, .T. ) ;
+#290 = FACE_OUTER_BOUND ( 'NONE', #231, .T. ) ;
+#291 = VECTOR ( 'NONE', #147, 1000.000000000000000 ) ;
+#292 = AXIS2_PLACEMENT_3D ( 'NONE', #35, #36, #38 ) ;
+#293 = ORIENTED_EDGE ( 'NONE', *, *, #304, .F. ) ;
+#294 = ADVANCED_FACE ( 'NONE', ( #325 ), #18, .T. ) ;
+#295 = ADVANCED_FACE ( 'NONE', ( #43 ), #19, .T. ) ;
+#296 = ADVANCED_FACE ( 'NONE', ( #185 ), #30, .T. ) ;
+#297 = ADVANCED_FACE ( 'NONE', ( #314 ), #177, .F. ) ;
+#298 = ORIENTED_EDGE ( 'NONE', *, *, #340, .T. ) ;
+#299 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #320 ) ) ;
+#300 = ORIENTED_EDGE ( 'NONE', *, *, #340, .F. ) ;
+#301 = ADVANCED_FACE ( 'NONE', ( #290 ), #74, .T. ) ;
+#302 = ADVANCED_FACE ( 'NONE', ( #34, #6 ), #83, .F. ) ;
+#303 = EDGE_CURVE ( 'NONE', #170, #241, #334, .T. ) ;
+#304 = EDGE_CURVE ( 'NONE', #122, #89, #212, .T. ) ;
+#305 = ADVANCED_FACE ( 'NONE', ( #81 ), #101, .T. ) ;
+#306 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #215, 'distance_accuracy_value', 'NONE');
+#307 = EDGE_LOOP ( 'NONE', ( #218, #208, #324, #270 ) ) ;
+#308 = ADVANCED_FACE ( 'NONE', ( #143 ), #88, .F. ) ;
+#309 = ADVANCED_FACE ( 'NONE', ( #60 ), #1, .F. ) ;
+#310 = ADVANCED_FACE ( 'NONE', ( #266, #329 ), #144, .T. ) ;
+#311 = DIRECTION ( 'NONE',  ( 0.5000000000000209800, -0.8660254037844265000, 0.0000000000000000000 ) ) ;
+#312 = EDGE_LOOP ( 'NONE', ( #141, #78, #338, #145 ) ) ;
+#313 = CARTESIAN_POINT ( 'NONE',  ( 14.35058935189833400, 35.79207333025037500, 0.0000000000000000000 ) ) ;
+#314 = FACE_OUTER_BOUND ( 'NONE', #176, .T. ) ;
+#315 = CARTESIAN_POINT ( 'NONE',  ( 11.85058935189833400, 38.29207333025046700, 5.000000000000000000 ) ) ;
+#316 = AXIS2_PLACEMENT_3D ( 'NONE', #67, #56, #77 ) ;
+#317 = ORIENTED_EDGE ( 'NONE', *, *, #206, .T. ) ;
+#318 = LINE ( 'NONE', #163, #291 ) ;
+#319 = CARTESIAN_POINT ( 'NONE',  ( 14.35058935189833400, 35.79207333025037500, 5.000000000000000000 ) ) ;
+#320 = STYLED_ITEM ( 'NONE', ( #156 ), #55 ) ;
+#321 = COLOUR_RGB ( '',0.6941176470588235100, 0.09411764705882352800, 0.09411764705882352800 ) ;
+#322 = EDGE_CURVE ( 'NONE', #286, #174, #318, .T. ) ;
+#323 = STYLED_ITEM ( 'NONE', ( #61 ), #48 ) ;
+#324 = ORIENTED_EDGE ( 'NONE', *, *, #15, .T. ) ;
+#325 = FACE_OUTER_BOUND ( 'NONE', #312, .T. ) ;
+#326 = EDGE_CURVE ( 'NONE', #331, #253, #239, .T. ) ;
+#327 = ORIENTED_EDGE ( 'NONE', *, *, #15, .F. ) ;
+#328 = EDGE_LOOP ( 'NONE', ( #200, #149, #153, #150 ) ) ;
+#329 = FACE_OUTER_BOUND ( 'NONE', #332, .T. ) ;
+#330 = CARTESIAN_POINT ( 'NONE',  ( 7.850589351898348900, 33.19399711889718000, 5.000000000000000000 ) ) ;
+#331 = VERTEX_POINT ( 'NONE', #171 ) ;
+#332 = EDGE_LOOP ( 'NONE', ( #342, #165, #154, #289, #135, #244 ) ) ;
+#333 = CARTESIAN_POINT ( 'NONE',  ( 15.85058935189835000, 33.19399711889718000, 0.0000000000000000000 ) ) ;
+#334 = LINE ( 'NONE', #99, #272 ) ;
+#335 = CARTESIAN_POINT ( 'NONE',  ( 15.85058935189835000, 33.19399711889718000, 5.000000000000000000 ) ) ;
+#336 = CARTESIAN_POINT ( 'NONE',  ( 11.85058935189833400, 38.29207333025046700, 5.000000000000000000 ) ) ;
+#337 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #306 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #215, #164, #246 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#338 = ORIENTED_EDGE ( 'NONE', *, *, #169, .T. ) ;
+#339 = CARTESIAN_POINT ( 'NONE',  ( 14.35058935189833400, 35.79207333025037500, 0.0000000000000000000 ) ) ;
+#340 = EDGE_CURVE ( 'NONE', #273, #235, #256, .T. ) ;
+#341 = CARTESIAN_POINT ( 'NONE',  ( 14.35058935189833400, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#342 = ORIENTED_EDGE ( 'NONE', *, *, #125, .T. ) ;
+ENDSEC;
+END-ISO-10303-21;

Firearms/Sacramento_Pistol-Caboose/STEP/RearSight^StikM1.STEP

@@ -0,0 +1,631 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('RearSight^StikM1.STEP',
+    '2013-09-01T22:38:08',
+    ( 'Asher' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#2 = ORIENTED_EDGE ( 'NONE', *, *, #588, .F. ) ;
+#3 = ORIENTED_EDGE ( 'NONE', *, *, #536, .T. ) ;
+#4 = ORIENTED_EDGE ( 'NONE', *, *, #513, .F. ) ;
+#5 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#6 = VERTEX_POINT ( 'NONE', #578 ) ;
+#7 = VECTOR ( 'NONE', #51, 1000.000000000000000 ) ;
+#8 = EDGE_CURVE ( 'NONE', #94, #239, #246, .T. ) ;
+#9 = DIRECTION ( 'NONE',  ( -0.7071067811865465700, 0.7071067811865483500, -0.0000000000000000000 ) ) ;
+#10 = LINE ( 'NONE', #92, #118 ) ;
+#11 = EDGE_CURVE ( 'NONE', #357, #585, #341, .T. ) ;
+#12 = FACE_BOUND ( 'NONE', #152, .T. ) ;
+#13 = ORIENTED_EDGE ( 'NONE', *, *, #546, .F. ) ;
+#14 = CARTESIAN_POINT ( 'NONE',  ( 10.50000000000002300, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#15 = VERTEX_POINT ( 'NONE', #151 ) ;
+#16 = ORIENTED_EDGE ( 'NONE', *, *, #545, .F. ) ;
+#17 = ORIENTED_EDGE ( 'NONE', *, *, #526, .T. ) ;
+#18 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#19 = ORIENTED_EDGE ( 'NONE', *, *, #564, .F. ) ;
+#20 = CARTESIAN_POINT ( 'NONE',  ( 14.44159634458352300, 32.42912981364183600, 5.000000000000000000 ) ) ;
+#21 = CARTESIAN_POINT ( 'NONE',  ( 10.00000000000002700, 38.29207333025046700, 5.000000000000000000 ) ) ;
+#22 = ORIENTED_EDGE ( 'NONE', *, *, #564, .T. ) ;
+#23 = CARTESIAN_POINT ( 'NONE',  ( -4.441596344583464500, 32.42912981364183600, 5.000000000000000000 ) ) ;
+#24 = LINE ( 'NONE', #28, #237 ) ;
+#25 = DIRECTION ( 'NONE',  ( -8.673617379884041600E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#26 = VERTEX_POINT ( 'NONE', #156 ) ;
+#27 = CARTESIAN_POINT ( 'NONE',  ( 9.000000000000024900, 38.29207333025046700, 0.0000000000000000000 ) ) ;
+#28 = CARTESIAN_POINT ( 'NONE',  ( 2.500000000000027500, 40.79207333025047400, 0.0000000000000000000 ) ) ;
+#29 = ORIENTED_EDGE ( 'NONE', *, *, #577, .F. ) ;
+#30 = LINE ( 'NONE', #553, #254 ) ;
+#31 = ORIENTED_EDGE ( 'NONE', *, *, #520, .T. ) ;
+#32 = CYLINDRICAL_SURFACE ( 'NONE', #456, 1.000000000000000200 ) ;
+#33 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#34 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#35 = ADVANCED_FACE ( 'NONE', ( #220 ), #236, .T. ) ;
+#36 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#37 = LINE ( 'NONE', #560, #145 ) ;
+#38 = SURFACE_STYLE_USAGE ( .BOTH. , #80 ) ;
+#39 = EDGE_LOOP ( 'NONE', ( #128, #559, #215, #574 ) ) ;
+#40 = DIRECTION ( 'NONE',  ( -0.4999999999999976100, -0.8660254037844400400, 0.0000000000000000000 ) ) ;
+#41 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #399 ) ;
+#42 = VECTOR ( 'NONE', #79, 1000.000000000000000 ) ;
+#43 = VERTEX_POINT ( 'NONE', #308 ) ;
+#44 = VECTOR ( 'NONE', #40, 1000.000000000000000 ) ;
+#45 = ORIENTED_EDGE ( 'NONE', *, *, #580, .T. ) ;
+#46 = LINE ( 'NONE', #72, #505 ) ;
+#47 = EDGE_LOOP ( 'NONE', ( #325, #380, #102, #437 ) ) ;
+#48 = ORIENTED_EDGE ( 'NONE', *, *, #606, .F. ) ;
+#49 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#50 = VECTOR ( 'NONE', #434, 1000.000000000000000 ) ;
+#51 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#52 = LINE ( 'NONE', #384, #50 ) ;
+#53 = LINE ( 'NONE', #241, #90 ) ;
+#54 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#55 = PLANE ( 'NONE',  #441 ) ;
+#56 = EDGE_LOOP ( 'NONE', ( #391, #121, #326, #412 ) ) ;
+#57 = PLANE ( 'NONE',  #448 ) ;
+#58 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#59 = CARTESIAN_POINT ( 'NONE',  ( 2.500000000000027500, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#60 = CARTESIAN_POINT ( 'NONE',  ( -2.499999999999972900, 38.79207333025047400, 0.0000000000000000000 ) ) ;
+#61 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#62 = LINE ( 'NONE', #14, #276 ) ;
+#63 = FACE_BOUND ( 'NONE', #479, .T. ) ;
+#64 = VERTEX_POINT ( 'NONE', #311 ) ;
+#65 = LINE ( 'NONE', #210, #568 ) ;
+#66 = VERTEX_POINT ( 'NONE', #279 ) ;
+#67 = CARTESIAN_POINT ( 'NONE',  ( 10.50000000000002300, 40.79207333025047400, 0.0000000000000000000 ) ) ;
+#68 = CARTESIAN_POINT ( 'NONE',  ( 2.500000000000028000, 35.79207333025047400, 0.0000000000000000000 ) ) ;
+#69 = CARTESIAN_POINT ( 'NONE',  ( -1.000000000000000200, 38.29207333025046700, 0.0000000000000000000 ) ) ;
+#70 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#71 = CARTESIAN_POINT ( 'NONE',  ( 2.500000000000028000, 35.79207333025047400, 5.000000000000000000 ) ) ;
+#72 = CARTESIAN_POINT ( 'NONE',  ( 2.500000000000027500, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#73 = VECTOR ( 'NONE', #492, 1000.000000000000000 ) ;
+#74 = CYLINDRICAL_SURFACE ( 'NONE', #413, 1.000000000000000900 ) ;
+#75 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#76 = ORIENTED_EDGE ( 'NONE', *, *, #535, .F. ) ;
+#77 = VECTOR ( 'NONE', #150, 1000.000000000000000 ) ;
+#78 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 38.29207333025046700, 0.0000000000000000000 ) ) ;
+#79 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#80 = SURFACE_SIDE_STYLE ('',( #475 ) ) ;
+#81 = ADVANCED_FACE ( 'NONE', ( #403 ), #252, .F. ) ;
+#82 = CARTESIAN_POINT ( 'NONE',  ( -2.499999999999972900, 40.79207333025047400, 0.0000000000000000000 ) ) ;
+#83 = VERTEX_POINT ( 'NONE', #192 ) ;
+#84 = CIRCLE ( 'NONE', #450, 1.000000000000000900 ) ;
+#85 = ORIENTED_EDGE ( 'NONE', *, *, #515, .T. ) ;
+#86 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#87 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#88 = ADVANCED_FACE ( 'NONE', ( #332 ), #195, .T. ) ;
+#89 = CARTESIAN_POINT ( 'NONE',  ( 7.500000000000026600, 35.79207333025047400, 5.000000000000000000 ) ) ;
+#90 = VECTOR ( 'NONE', #127, 1000.000000000000200 ) ;
+#91 = LINE ( 'NONE', #135, #367 ) ;
+#92 = CARTESIAN_POINT ( 'NONE',  ( 7.500000000000026600, 40.79207333025047400, 0.0000000000000000000 ) ) ;
+#93 = VERTEX_POINT ( 'NONE', #361 ) ;
+#94 = VERTEX_POINT ( 'NONE', #67 ) ;
+#95 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#96 = VERTEX_POINT ( 'NONE', #69 ) ;
+#97 = ORIENTED_EDGE ( 'NONE', *, *, #580, .F. ) ;
+#98 = VERTEX_POINT ( 'NONE', #317 ) ;
+#99 = VECTOR ( 'NONE', #263, 1000.000000000000000 ) ;
+#100 = CARTESIAN_POINT ( 'NONE',  ( 25.64603666512525800, 25.64603666512519500, 5.000000000000000000 ) ) ;
+#101 = FACE_OUTER_BOUND ( 'NONE', #426, .T. ) ;
+#102 = ORIENTED_EDGE ( 'NONE', *, *, #581, .F. ) ;
+#103 = ORIENTED_EDGE ( 'NONE', *, *, #551, .T. ) ;
+#104 = ORIENTED_EDGE ( 'NONE', *, *, #549, .F. ) ;
+#105 = CARTESIAN_POINT ( 'NONE',  ( 7.500000000000026600, 35.79207333025047400, 5.000000000000000000 ) ) ;
+#106 = ORIENTED_EDGE ( 'NONE', *, *, #584, .T. ) ;
+#107 = CARTESIAN_POINT ( 'NONE',  ( -2.499999999999972900, 35.79207333025047400, 5.000000000000000000 ) ) ;
+#108 = CARTESIAN_POINT ( 'NONE',  ( 14.44159634458352300, 32.42912981364183600, 5.000000000000000000 ) ) ;
+#109 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#110 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#111 = ORIENTED_EDGE ( 'NONE', *, *, #554, .T. ) ;
+#112 = ORIENTED_EDGE ( 'NONE', *, *, #508, .F. ) ;
+#113 = DIRECTION ( 'NONE',  ( -0.8660254037844396000, -0.4999999999999983900, 0.0000000000000000000 ) ) ;
+#114 = CARTESIAN_POINT ( 'NONE',  ( -2.499999999999972900, 35.79207333025047400, 0.0000000000000000000 ) ) ;
+#115 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #123, 'distance_accuracy_value', 'NONE');
+#116 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#117 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 38.29207333025046700, 5.000000000000000000 ) ) ;
+#118 = VECTOR ( 'NONE', #368, 1000.000000000000000 ) ;
+#119 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#120 = PRODUCT_CONTEXT ( 'NONE', #282, 'mechanical' ) ;
+#121 = ORIENTED_EDGE ( 'NONE', *, *, #535, .T. ) ;
+#122 = VERTEX_POINT ( 'NONE', #451 ) ;
+#123 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#124 = EDGE_LOOP ( 'NONE', ( #140, #130 ) ) ;
+#125 = PRODUCT ( 'RearSight^StikM1', 'RearSight^StikM1', '', ( #120 ) ) ;
+#126 = CARTESIAN_POINT ( 'NONE',  ( -4.441596344583464500, 32.42912981364183600, 0.0000000000000000000 ) ) ;
+#127 = DIRECTION ( 'NONE',  ( -0.4999999999999983900, 0.8660254037844394800, 0.0000000000000000000 ) ) ;
+#128 = ORIENTED_EDGE ( 'NONE', *, *, #506, .T. ) ;
+#129 = LINE ( 'NONE', #497, #77 ) ;
+#130 = ORIENTED_EDGE ( 'NONE', *, *, #555, .F. ) ;
+#131 = ADVANCED_FACE ( 'NONE', ( #101 ), #457, .F. ) ;
+#132 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#133 = CARTESIAN_POINT ( 'NONE',  ( 12.50000000000002700, 38.79207333025046000, 0.0000000000000000000 ) ) ;
+#134 = ADVANCED_FACE ( 'NONE', ( #265 ), #470, .F. ) ;
+#135 = CARTESIAN_POINT ( 'NONE',  ( 12.50000000000002700, 38.79207333025046000, 5.000000000000000000 ) ) ;
+#136 = LINE ( 'NONE', #126, #330 ) ;
+#137 = FILL_AREA_STYLE_COLOUR ( '', #378 ) ;
+#138 = LINE ( 'NONE', #105, #284 ) ;
+#139 = VERTEX_POINT ( 'NONE', #599 ) ;
+#140 = ORIENTED_EDGE ( 'NONE', *, *, #515, .F. ) ;
+#141 = CARTESIAN_POINT ( 'NONE',  ( -2.499999999999972900, 35.79207333025047400, 5.000000000000000000 ) ) ;
+#142 = EDGE_LOOP ( 'NONE', ( #224, #13 ) ) ;
+#143 = VERTEX_POINT ( 'NONE', #327 ) ;
+#144 = ORIENTED_EDGE ( 'NONE', *, *, #8, .F. ) ;
+#145 = VECTOR ( 'NONE', #346, 1000.000000000000000 ) ;
+#146 = FACE_OUTER_BOUND ( 'NONE', #217, .T. ) ;
+#147 = CARTESIAN_POINT ( 'NONE',  ( 7.500000000000026600, 35.79207333025047400, 5.000000000000000000 ) ) ;
+#148 = FACE_OUTER_BOUND ( 'NONE', #409, .T. ) ;
+#149 = CARTESIAN_POINT ( 'NONE',  ( 14.44159634458352300, 32.42912981364183600, 5.000000000000000000 ) ) ;
+#150 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#151 = CARTESIAN_POINT ( 'NONE',  ( 11.00000000000002700, 38.29207333025046700, 5.000000000000000000 ) ) ;
+#152 = EDGE_LOOP ( 'NONE', ( #22, #185 ) ) ;
+#153 = ORIENTED_EDGE ( 'NONE', *, *, #569, .F. ) ;
+#154 = CARTESIAN_POINT ( 'NONE',  ( 10.50000000000002300, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#155 = DIRECTION ( 'NONE',  ( -0.4999999999999976100, -0.8660254037844400400, 0.0000000000000000000 ) ) ;
+#156 = CARTESIAN_POINT ( 'NONE',  ( 1.000000000000000200, 38.29207333025046700, 5.000000000000000000 ) ) ;
+#157 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 38.29207333025046700, 0.0000000000000000000 ) ) ;
+#158 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#159 = VECTOR ( 'NONE', #227, 1000.000000000000200 ) ;
+#160 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#161 = EDGE_LOOP ( 'NONE', ( #45, #507, #590, #259 ) ) ;
+#162 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#163 = SURFACE_STYLE_USAGE ( .BOTH. , #404 ) ;
+#164 = LINE ( 'NONE', #257, #42 ) ;
+#165 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#166 = CARTESIAN_POINT ( 'NONE',  ( 12.50000000000002700, 35.79207333025047400, 5.000000000000000000 ) ) ;
+#167 = CIRCLE ( 'NONE', #425, 1.000000000000000900 ) ;
+#168 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#169 = ADVANCED_FACE ( 'NONE', ( #420, #222, #146 ), #329, .T. ) ;
+#170 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#171 = ORIENTED_EDGE ( 'NONE', *, *, #508, .T. ) ;
+#172 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#173 = CARTESIAN_POINT ( 'NONE',  ( -0.4999999999999657500, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#174 = PLANE ( 'NONE',  #433 ) ;
+#175 = CARTESIAN_POINT ( 'NONE',  ( -20.64603666512521900, 20.64603666512534400, 5.000000000000000000 ) ) ;
+#176 = CARTESIAN_POINT ( 'NONE',  ( 11.00000000000002700, 38.29207333025046700, 0.0000000000000000000 ) ) ;
+#177 = VECTOR ( 'NONE', #86, 1000.000000000000000 ) ;
+#178 = CARTESIAN_POINT ( 'NONE',  ( 14.44159634458352300, 32.42912981364183600, 0.0000000000000000000 ) ) ;
+#179 = ORIENTED_EDGE ( 'NONE', *, *, #588, .T. ) ;
+#180 = VECTOR ( 'NONE', #18, 1000.000000000000000 ) ;
+#181 = CARTESIAN_POINT ( 'NONE',  ( 10.00000000000002700, 38.29207333025046700, -5.000000000000000000 ) ) ;
+#182 = VECTOR ( 'NONE', #278, 1000.000000000000000 ) ;
+#183 = LINE ( 'NONE', #415, #382 ) ;
+#184 = VERTEX_POINT ( 'NONE', #211 ) ;
+#185 = ORIENTED_EDGE ( 'NONE', *, *, #589, .T. ) ;
+#186 = LINE ( 'NONE', #300, #99 ) ;
+#187 = CARTESIAN_POINT ( 'NONE',  ( -2.499999999999972900, 35.79207333025047400, 5.000000000000000000 ) ) ;
+#188 = DIRECTION ( 'NONE',  ( -0.7071067811865484600, -0.7071067811865466800, 0.0000000000000000000 ) ) ;
+#189 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#190 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#191 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#192 = CARTESIAN_POINT ( 'NONE',  ( 10.50000000000001400, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#193 = CARTESIAN_POINT ( 'NONE',  ( 10.50000000000002300, 40.79207333025047400, 0.0000000000000000000 ) ) ;
+#194 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#195 = PLANE ( 'NONE',  #493 ) ;
+#196 = VECTOR ( 'NONE', #337, 1000.000000000000000 ) ;
+#197 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#198 = DIRECTION ( 'NONE',  ( 0.7071067811865465700, -0.7071067811865483500, 0.0000000000000000000 ) ) ;
+#199 = ORIENTED_EDGE ( 'NONE', *, *, #591, .F. ) ;
+#200 = FILL_AREA_STYLE ('',( #459 ) ) ;
+#201 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#202 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#203 = ORIENTED_EDGE ( 'NONE', *, *, #612, .T. ) ;
+#204 = VECTOR ( 'NONE', #155, 1000.000000000000000 ) ;
+#205 = ORIENTED_EDGE ( 'NONE', *, *, #557, .F. ) ;
+#206 = CARTESIAN_POINT ( 'NONE',  ( -0.4999999999999657500, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#207 = PLANE ( 'NONE',  #478 ) ;
+#208 = ADVANCED_FACE ( 'NONE', ( #522 ), #207, .T. ) ;
+#209 = VECTOR ( 'NONE', #116, 1000.000000000000000 ) ;
+#210 = CARTESIAN_POINT ( 'NONE',  ( 2.500000000000028000, 35.79207333025047400, 0.0000000000000000000 ) ) ;
+#211 = CARTESIAN_POINT ( 'NONE',  ( -2.499999999999972900, 35.79207333025047400, 0.0000000000000000000 ) ) ;
+#212 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#213 = CIRCLE ( 'NONE', #419, 1.000000000000000200 ) ;
+#214 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#215 = ORIENTED_EDGE ( 'NONE', *, *, #523, .F. ) ;
+#216 = EDGE_LOOP ( 'NONE', ( #374, #3, #430, #392 ) ) ;
+#217 = EDGE_LOOP ( 'NONE', ( #482, #530, #29, #366, #292, #510, #484, #481, #587, #277, #104, #542 ) ) ;
+#218 = EDGE_LOOP ( 'NONE', ( #245, #394, #338, #455 ) ) ;
+#219 = ORIENTED_EDGE ( 'NONE', *, *, #614, .F. ) ;
+#220 = FACE_OUTER_BOUND ( 'NONE', #372, .T. ) ;
+#221 = LINE ( 'NONE', #598, #436 ) ;
+#222 = FACE_BOUND ( 'NONE', #142, .T. ) ;
+#223 = EDGE_LOOP ( 'NONE', ( #395, #519, #499, #364, #281, #465, #301, #353, #17, #219, #97, #547 ) ) ;
+#224 = ORIENTED_EDGE ( 'NONE', *, *, #529, .F. ) ;
+#225 = ORIENTED_EDGE ( 'NONE', *, *, #596, .F. ) ;
+#226 = ORIENTED_EDGE ( 'NONE', *, *, #554, .F. ) ;
+#227 = DIRECTION ( 'NONE',  ( -0.4999999999999983900, 0.8660254037844394800, 0.0000000000000000000 ) ) ;
+#228 = PLANE ( 'NONE',  #452 ) ;
+#229 = PRESENTATION_STYLE_ASSIGNMENT (( #163 ) ) ;
+#230 = MANIFOLD_SOLID_BREP ( 'Chamfer1', #304 ) ;
+#231 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 38.29207333025046700, -5.000000000000000000 ) ) ;
+#232 = CARTESIAN_POINT ( 'NONE',  ( -4.441596344583464500, 32.42912981364183600, 5.000000000000000000 ) ) ;
+#233 = ORIENTED_EDGE ( 'NONE', *, *, #536, .F. ) ;
+#234 = VECTOR ( 'NONE', #198, 1000.000000000000100 ) ;
+#235 = DIRECTION ( 'NONE',  ( 0.4999999999999983300, -0.8660254037844394800, 0.0000000000000000000 ) ) ;
+#236 = PLANE ( 'NONE',  #498 ) ;
+#237 = VECTOR ( 'NONE', #336, 1000.000000000000000 ) ;
+#238 = VERTEX_POINT ( 'NONE', #89 ) ;
+#239 = VERTEX_POINT ( 'NONE', #133 ) ;
+#240 = CARTESIAN_POINT ( 'NONE',  ( 2.500000000000028000, 35.79207333025047400, 5.000000000000000000 ) ) ;
+#241 = CARTESIAN_POINT ( 'NONE',  ( 14.44159634458352300, 32.42912981364183600, 0.0000000000000000000 ) ) ;
+#242 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#243 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#244 = VERTEX_POINT ( 'NONE', #166 ) ;
+#245 = ORIENTED_EDGE ( 'NONE', *, *, #577, .T. ) ;
+#246 = LINE ( 'NONE', #193, #234 ) ;
+#247 = CARTESIAN_POINT ( 'NONE',  ( 7.500000000000026600, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#248 = ADVANCED_FACE ( 'NONE', ( #503 ), #288, .T. ) ;
+#249 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#250 = LINE ( 'NONE', #324, #471 ) ;
+#251 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#252 = CYLINDRICAL_SURFACE ( 'NONE', #494, 1.000000000000000200 ) ;
+#253 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#254 = VECTOR ( 'NONE', #343, 1000.000000000000000 ) ;
+#255 = LINE ( 'NONE', #100, #302 ) ;
+#256 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'RearSight^StikM1', ( #230, #401 ), #414 ) ;
+#257 = CARTESIAN_POINT ( 'NONE',  ( 1.000000000000000200, 38.29207333025046700, -5.000000000000000000 ) ) ;
+#258 = CARTESIAN_POINT ( 'NONE',  ( 7.500000000000026600, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#259 = ORIENTED_EDGE ( 'NONE', *, *, #605, .T. ) ;
+#260 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #399, 'design' ) ;
+#261 = LINE ( 'NONE', #147, #7 ) ;
+#262 = LINE ( 'NONE', #331, #558 ) ;
+#263 = DIRECTION ( 'NONE',  ( 0.7071067811865496800, 0.7071067811865453500, -0.0000000000000000000 ) ) ;
+#264 = CIRCLE ( 'NONE', #424, 1.000000000000000200 ) ;
+#265 = FACE_OUTER_BOUND ( 'NONE', #39, .T. ) ;
+#266 = VECTOR ( 'NONE', #110, 1000.000000000000000 ) ;
+#267 = VERTEX_POINT ( 'NONE', #173 ) ;
+#268 = SURFACE_STYLE_FILL_AREA ( #200 ) ;
+#269 = CARTESIAN_POINT ( 'NONE',  ( 7.500000000000026600, 40.79207333025047400, 0.0000000000000000000 ) ) ;
+#270 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #34, 'distance_accuracy_value', 'NONE');
+#271 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#272 = CARTESIAN_POINT ( 'NONE',  ( -2.499999999999972900, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#273 = FACE_OUTER_BOUND ( 'NONE', #56, .T. ) ;
+#274 = CARTESIAN_POINT ( 'NONE',  ( 12.50000000000002700, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#275 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#276 = VECTOR ( 'NONE', #119, 1000.000000000000000 ) ;
+#277 = ORIENTED_EDGE ( 'NONE', *, *, #533, .F. ) ;
+#278 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#279 = CARTESIAN_POINT ( 'NONE',  ( -2.499999999999972900, 35.79207333025047400, 5.000000000000000000 ) ) ;
+#280 = LINE ( 'NONE', #82, #518 ) ;
+#281 = ORIENTED_EDGE ( 'NONE', *, *, #524, .T. ) ;
+#282 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#283 = VERTEX_POINT ( 'NONE', #449 ) ;
+#284 = VECTOR ( 'NONE', #61, 1000.000000000000000 ) ;
+#285 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#286 = ORIENTED_EDGE ( 'NONE', *, *, #544, .T. ) ;
+#287 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#288 = PLANE ( 'NONE',  #469 ) ;
+#289 = ADVANCED_FACE ( 'NONE', ( #466 ), #309, .F. ) ;
+#290 = LINE ( 'NONE', #71, #182 ) ;
+#291 = CIRCLE ( 'NONE', #435, 1.000000000000000200 ) ;
+#292 = ORIENTED_EDGE ( 'NONE', *, *, #521, .T. ) ;
+#293 = EDGE_LOOP ( 'NONE', ( #501, #586, #575, #171 ) ) ;
+#294 = ADVANCED_FACE ( 'NONE', ( #148 ), #390, .F. ) ;
+#295 = FILL_AREA_STYLE ('',( #137 ) ) ;
+#296 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#297 = VECTOR ( 'NONE', #429, 1000.000000000000000 ) ;
+#298 = ORIENTED_EDGE ( 'NONE', *, *, #602, .F. ) ;
+#299 = FACE_OUTER_BOUND ( 'NONE', #323, .T. ) ;
+#300 = CARTESIAN_POINT ( 'NONE',  ( -2.499999999999972900, 38.79207333025047400, 0.0000000000000000000 ) ) ;
+#301 = ORIENTED_EDGE ( 'NONE', *, *, #581, .T. ) ;
+#302 = VECTOR ( 'NONE', #9, 1000.000000000000100 ) ;
+#303 = FACE_OUTER_BOUND ( 'NONE', #421, .T. ) ;
+#304 = CLOSED_SHELL ( 'NONE', ( #600, #328, #134, #289, #294, #369, #208, #35, #525, #88, #248, #467, #169, #532, #81, #416, #131, #410 ) ) ;
+#305 = CARTESIAN_POINT ( 'NONE',  ( 11.00000000000002700, 38.29207333025046700, -5.000000000000000000 ) ) ;
+#306 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #398 ) ;
+#307 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#308 = CARTESIAN_POINT ( 'NONE',  ( 2.500000000000027500, 40.79207333025047400, 0.0000000000000000000 ) ) ;
+#309 = PLANE ( 'NONE',  #464 ) ;
+#310 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#311 = CARTESIAN_POINT ( 'NONE',  ( -4.441596344583464500, 32.42912981364183600, 5.000000000000000000 ) ) ;
+#312 = CARTESIAN_POINT ( 'NONE',  ( -2.499999999999972900, 38.79207333025047400, 5.000000000000000000 ) ) ;
+#313 = ORIENTED_EDGE ( 'NONE', *, *, #566, .T. ) ;
+#314 = CARTESIAN_POINT ( 'NONE',  ( 2.500000000000028000, 35.79207333025047400, 5.000000000000000000 ) ) ;
+#315 = LINE ( 'NONE', #107, #44 ) ;
+#316 = VERTEX_POINT ( 'NONE', #358 ) ;
+#317 = CARTESIAN_POINT ( 'NONE',  ( 7.500000000000026600, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#318 = CARTESIAN_POINT ( 'NONE',  ( 7.500000000000026600, 35.79207333025047400, 5.000000000000000000 ) ) ;
+#319 = LINE ( 'NONE', #305, #418 ) ;
+#320 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#321 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#322 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#323 = EDGE_LOOP ( 'NONE', ( #431, #613, #334, #85 ) ) ;
+#324 = CARTESIAN_POINT ( 'NONE',  ( 7.500000000000026600, 35.79207333025047400, 0.0000000000000000000 ) ) ;
+#325 = ORIENTED_EDGE ( 'NONE', *, *, #592, .T. ) ;
+#326 = ORIENTED_EDGE ( 'NONE', *, *, #516, .T. ) ;
+#327 = CARTESIAN_POINT ( 'NONE',  ( 2.500000000000027500, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#328 = ADVANCED_FACE ( 'NONE', ( #379 ), #32, .F. ) ;
+#329 = PLANE ( 'NONE',  #485 ) ;
+#330 = VECTOR ( 'NONE', #423, 1000.000000000000000 ) ;
+#331 = CARTESIAN_POINT ( 'NONE',  ( 7.500000000000026600, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#332 = FACE_OUTER_BOUND ( 'NONE', #447, .T. ) ;
+#333 = ORIENTED_EDGE ( 'NONE', *, *, #614, .T. ) ;
+#334 = ORIENTED_EDGE ( 'NONE', *, *, #591, .T. ) ;
+#335 = CARTESIAN_POINT ( 'NONE',  ( 2.500000000000028000, 35.79207333025047400, 5.000000000000000000 ) ) ;
+#336 = DIRECTION ( 'NONE',  ( 8.673617379884040400E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#337 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#338 = ORIENTED_EDGE ( 'NONE', *, *, #511, .F. ) ;
+#339 = ORIENTED_EDGE ( 'NONE', *, *, #513, .T. ) ;
+#340 = VERTEX_POINT ( 'NONE', #60 ) ;
+#341 = LINE ( 'NONE', #108, #209 ) ;
+#342 = LINE ( 'NONE', #141, #360 ) ;
+#343 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#344 = PRESENTATION_STYLE_ASSIGNMENT (( #38 ) ) ;
+#345 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #285, 'distance_accuracy_value', 'NONE');
+#346 = DIRECTION ( 'NONE',  ( 8.673617379884040400E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#347 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#348 = CARTESIAN_POINT ( 'NONE',  ( 14.44159634458352300, 32.42912981364183600, 5.000000000000000000 ) ) ;
+#349 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#350 = EDGE_LOOP ( 'NONE', ( #16, #76, #144, #351 ) ) ;
+#351 = ORIENTED_EDGE ( 'NONE', *, *, #552, .F. ) ;
+#352 = VERTEX_POINT ( 'NONE', #314 ) ;
+#353 = ORIENTED_EDGE ( 'NONE', *, *, #8, .T. ) ;
+#354 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#355 = CARTESIAN_POINT ( 'NONE',  ( -2.499999999999972900, 38.79207333025047400, 5.000000000000000000 ) ) ;
+#356 = LINE ( 'NONE', #175, #73 ) ;
+#357 = VERTEX_POINT ( 'NONE', #348 ) ;
+#358 = CARTESIAN_POINT ( 'NONE',  ( 12.50000000000002500, 38.79207333025046000, 5.000000000000000000 ) ) ;
+#359 = DIRECTION ( 'NONE',  ( 0.7071067811865453500, -0.7071067811865496800, 0.0000000000000000000 ) ) ;
+#360 = VECTOR ( 'NONE', #476, 1000.000000000000000 ) ;
+#361 = CARTESIAN_POINT ( 'NONE',  ( 1.000000000000000200, 38.29207333025046700, 0.0000000000000000000 ) ) ;
+#362 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 38.29207333025046700, -5.000000000000000000 ) ) ;
+#363 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #282 ) ;
+#364 = ORIENTED_EDGE ( 'NONE', *, *, #572, .T. ) ;
+#365 = LINE ( 'NONE', #232, #180 ) ;
+#366 = ORIENTED_EDGE ( 'NONE', *, *, #523, .T. ) ;
+#367 = VECTOR ( 'NONE', #531, 1000.000000000000000 ) ;
+#368 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#369 = ADVANCED_FACE ( 'NONE', ( #273 ), #228, .T. ) ;
+#370 = LINE ( 'NONE', #240, #488 ) ;
+#371 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ;
+#372 = EDGE_LOOP ( 'NONE', ( #153, #112, #383, #286 ) ) ;
+#373 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#374 = ORIENTED_EDGE ( 'NONE', *, *, #589, .F. ) ;
+#375 = DIRECTION ( 'NONE',  ( 0.4999999999999975600, 0.8660254037844400400, 0.0000000000000000000 ) ) ;
+#376 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#377 = CARTESIAN_POINT ( 'NONE',  ( -1.000000000000000200, 38.29207333025046700, 5.000000000000000000 ) ) ;
+#378 = COLOUR_RGB ( '',0.6941176470588235100, 0.09411764705882352800, 0.09411764705882352800 ) ;
+#379 = FACE_OUTER_BOUND ( 'NONE', #216, .T. ) ;
+#380 = ORIENTED_EDGE ( 'NONE', *, *, #552, .T. ) ;
+#381 = LINE ( 'NONE', #149, #159 ) ;
+#382 = VECTOR ( 'NONE', #376, 1000.000000000000000 ) ;
+#383 = ORIENTED_EDGE ( 'NONE', *, *, #533, .T. ) ;
+#384 = CARTESIAN_POINT ( 'NONE',  ( -2.499999999999972900, 35.79207333025047400, 5.000000000000000000 ) ) ;
+#385 = VECTOR ( 'NONE', #5, 1000.000000000000000 ) ;
+#386 = VERTEX_POINT ( 'NONE', #502 ) ;
+#387 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#388 = CARTESIAN_POINT ( 'NONE',  ( 12.50000000000002700, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#389 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 8.673617379884041600E-017, -0.0000000000000000000 ) ) ;
+#390 = PLANE ( 'NONE',  #460 ) ;
+#391 = ORIENTED_EDGE ( 'NONE', *, *, #526, .F. ) ;
+#392 = ORIENTED_EDGE ( 'NONE', *, *, #612, .F. ) ;
+#393 = LINE ( 'NONE', #274, #463 ) ;
+#394 = ORIENTED_EDGE ( 'NONE', *, *, #596, .T. ) ;
+#395 = ORIENTED_EDGE ( 'NONE', *, *, #511, .T. ) ;
+#396 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #125 ) ) ;
+#397 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #125, .NOT_KNOWN. ) ;
+#398 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #397, #260 ) ;
+#399 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#400 = LINE ( 'NONE', #312, #297 ) ;
+#401 = AXIS2_PLACEMENT_3D ( 'NONE', #243, #517, #197 ) ;
+#402 = ORIENTED_EDGE ( 'NONE', *, *, #529, .T. ) ;
+#403 = FACE_OUTER_BOUND ( 'NONE', #534, .T. ) ;
+#404 = SURFACE_SIDE_STYLE ('',( #268 ) ) ;
+#405 = ORIENTED_EDGE ( 'NONE', *, *, #11, .T. ) ;
+#406 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #115 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #123, #322, #75 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#407 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #411 ), #406 ) ;
+#408 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #411 ) ) ;
+#409 = EDGE_LOOP ( 'NONE', ( #333, #48, #205, #405 ) ) ;
+#410 = ADVANCED_FACE ( 'NONE', ( #543 ), #57, .F. ) ;
+#411 = STYLED_ITEM ( 'NONE', ( #229 ), #256 ) ;
+#412 = ORIENTED_EDGE ( 'NONE', *, *, #606, .T. ) ;
+#413 = AXIS2_PLACEMENT_3D ( 'NONE', #181, #480, #95 ) ;
+#414 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #345 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #285, #462, #201 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#415 = CARTESIAN_POINT ( 'NONE',  ( 12.50000000000002700, 40.79207333025047400, 0.0000000000000000000 ) ) ;
+#416 = ADVANCED_FACE ( 'NONE', ( #299 ), #509, .F. ) ;
+#417 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#418 = VECTOR ( 'NONE', #387, 1000.000000000000000 ) ;
+#419 = AXIS2_PLACEMENT_3D ( 'NONE', #157, #539, #1 ) ;
+#420 = FACE_BOUND ( 'NONE', #124, .T. ) ;
+#421 = EDGE_LOOP ( 'NONE', ( #4, #106, #454, #199 ) ) ;
+#422 = ORIENTED_EDGE ( 'NONE', *, *, #572, .F. ) ;
+#423 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#424 = AXIS2_PLACEMENT_3D ( 'NONE', #78, #165, #242 ) ;
+#425 = AXIS2_PLACEMENT_3D ( 'NONE', #514, #583, #54 ) ;
+#426 = EDGE_LOOP ( 'NONE', ( #491, #2, #298, #225 ) ) ;
+#427 = AXIS2_PLACEMENT_3D ( 'NONE', #579, #70, #162 ) ;
+#428 = AXIS2_PLACEMENT_3D ( 'NONE', #253, #168, #132 ) ;
+#429 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#430 = ORIENTED_EDGE ( 'NONE', *, *, #546, .T. ) ;
+#431 = ORIENTED_EDGE ( 'NONE', *, *, #584, .F. ) ;
+#432 = AXIS2_PLACEMENT_3D ( 'NONE', #117, #160, #194 ) ;
+#433 = AXIS2_PLACEMENT_3D ( 'NONE', #335, #296, #214 ) ;
+#434 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#435 = AXIS2_PLACEMENT_3D ( 'NONE', #609, #87, #172 ) ;
+#436 = VECTOR ( 'NONE', #33, 1000.000000000000000 ) ;
+#437 = ORIENTED_EDGE ( 'NONE', *, *, #544, .F. ) ;
+#438 = EDGE_LOOP ( 'NONE', ( #597, #179, #31, #111 ) ) ;
+#439 = AXIS2_PLACEMENT_3D ( 'NONE', #21, #310, #189 ) ;
+#440 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#441 = AXIS2_PLACEMENT_3D ( 'NONE', #187, #440, #347 ) ;
+#442 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#443 = AXIS2_PLACEMENT_3D ( 'NONE', #496, #442, #275 ) ;
+#444 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#445 = FACE_OUTER_BOUND ( 'NONE', #218, .T. ) ;
+#446 = CARTESIAN_POINT ( 'NONE',  ( 10.00000000000002700, 38.29207333025046700, 0.0000000000000000000 ) ) ;
+#447 = EDGE_LOOP ( 'NONE', ( #422, #226, #313, #550 ) ) ;
+#448 = AXIS2_PLACEMENT_3D ( 'NONE', #154, #188, #271 ) ;
+#449 = CARTESIAN_POINT ( 'NONE',  ( 12.50000000000002700, 35.79207333025047400, 0.0000000000000000000 ) ) ;
+#450 = AXIS2_PLACEMENT_3D ( 'NONE', #446, #58, #354 ) ;
+#451 = CARTESIAN_POINT ( 'NONE',  ( 7.500000000000026600, 35.79207333025047400, 0.0000000000000000000 ) ) ;
+#452 = AXIS2_PLACEMENT_3D ( 'NONE', #388, #561, #307 ) ;
+#453 = VECTOR ( 'NONE', #287, 1000.000000000000000 ) ;
+#454 = ORIENTED_EDGE ( 'NONE', *, *, #555, .T. ) ;
+#455 = ORIENTED_EDGE ( 'NONE', *, *, #541, .F. ) ;
+#456 = AXIS2_PLACEMENT_3D ( 'NONE', #231, #576, #444 ) ;
+#457 = PLANE ( 'NONE',  #489 ) ;
+#458 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#459 = FILL_AREA_STYLE_COLOUR ( '', #495 ) ;
+#460 = AXIS2_PLACEMENT_3D ( 'NONE', #20, #113, #235 ) ;
+#461 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#462 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#463 = VECTOR ( 'NONE', #570, 1000.000000000000000 ) ;
+#464 = AXIS2_PLACEMENT_3D ( 'NONE', #23, #504, #109 ) ;
+#465 = ORIENTED_EDGE ( 'NONE', *, *, #569, .T. ) ;
+#466 = FACE_OUTER_BOUND ( 'NONE', #161, .T. ) ;
+#467 = ADVANCED_FACE ( 'NONE', ( #445 ), #55, .T. ) ;
+#468 = DIRECTION ( 'NONE',  ( 0.8660254037844400400, -0.4999999999999975600, 0.0000000000000000000 ) ) ;
+#469 = AXIS2_PLACEMENT_3D ( 'NONE', #565, #158, #190 ) ;
+#470 = PLANE ( 'NONE',  #487 ) ;
+#471 = VECTOR ( 'NONE', #461, 1000.000000000000000 ) ;
+#472 = CARTESIAN_POINT ( 'NONE',  ( -2.499999999999972900, 35.79207333025047400, 5.000000000000000000 ) ) ;
+#473 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #270 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #34, #36, #417 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#474 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #483 ), #473 ) ;
+#475 = SURFACE_STYLE_FILL_AREA ( #295 ) ;
+#476 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#477 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #483 ) ) ;
+#478 = AXIS2_PLACEMENT_3D ( 'NONE', #247, #202, #170 ) ;
+#479 = EDGE_LOOP ( 'NONE', ( #103, #339 ) ) ;
+#480 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#481 = ORIENTED_EDGE ( 'NONE', *, *, #545, .T. ) ;
+#482 = ORIENTED_EDGE ( 'NONE', *, *, #520, .F. ) ;
+#483 = STYLED_ITEM ( 'NONE', ( #344 ), #230 ) ;
+#484 = ORIENTED_EDGE ( 'NONE', *, *, #516, .F. ) ;
+#485 = AXIS2_PLACEMENT_3D ( 'NONE', #371, #251, #249 ) ;
+#486 = CARTESIAN_POINT ( 'NONE',  ( -4.441596344583464500, 32.42912981364183600, 5.000000000000000000 ) ) ;
+#487 = AXIS2_PLACEMENT_3D ( 'NONE', #472, #468, #375 ) ;
+#488 = VECTOR ( 'NONE', #458, 1000.000000000000000 ) ;
+#489 = AXIS2_PLACEMENT_3D ( 'NONE', #355, #359, #604 ) ;
+#490 = LINE ( 'NONE', #272, #266 ) ;
+#491 = ORIENTED_EDGE ( 'NONE', *, *, #538, .F. ) ;
+#492 = DIRECTION ( 'NONE',  ( -0.7071067811865496800, -0.7071067811865453500, -0.0000000000000000000 ) ) ;
+#493 = AXIS2_PLACEMENT_3D ( 'NONE', #59, #389, #25 ) ;
+#494 = AXIS2_PLACEMENT_3D ( 'NONE', #362, #349, #191 ) ;
+#495 = COLOUR_RGB ( '',0.6941176470588235100, 0.09411764705882352800, 0.09411764705882352800 ) ;
+#496 = CARTESIAN_POINT ( 'NONE',  ( 10.00000000000002700, 38.29207333025046700, -5.000000000000000000 ) ) ;
+#497 = CARTESIAN_POINT ( 'NONE',  ( -2.499999999999972900, 35.79207333025047400, 0.0000000000000000000 ) ) ;
+#498 = AXIS2_PLACEMENT_3D ( 'NONE', #318, #320, #571 ) ;
+#499 = ORIENTED_EDGE ( 'NONE', *, *, #608, .T. ) ;
+#500 = CIRCLE ( 'NONE', #439, 1.000000000000000900 ) ;
+#501 = ORIENTED_EDGE ( 'NONE', *, *, #524, .F. ) ;
+#502 = CARTESIAN_POINT ( 'NONE',  ( -0.4999999999999657500, 40.79207333025047400, 0.0000000000000000000 ) ) ;
+#503 = FACE_OUTER_BOUND ( 'NONE', #438, .T. ) ;
+#504 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#505 = VECTOR ( 'NONE', #321, 1000.000000000000000 ) ;
+#506 = EDGE_CURVE ( 'NONE', #184, #6, #595, .T. ) ;
+#507 = ORIENTED_EDGE ( 'NONE', *, *, #11, .F. ) ;
+#508 = EDGE_CURVE ( 'NONE', #238, #122, #138, .T. ) ;
+#509 = CYLINDRICAL_SURFACE ( 'NONE', #443, 1.000000000000000900 ) ;
+#510 = ORIENTED_EDGE ( 'NONE', *, *, #557, .T. ) ;
+#511 = EDGE_CURVE ( 'NONE', #184, #340, #129, .T. ) ;
+#512 = CIRCLE ( 'NONE', #432, 1.000000000000000200 ) ;
+#513 = EDGE_CURVE ( 'NONE', #611, #594, #84, .T. ) ;
+#514 = CARTESIAN_POINT ( 'NONE',  ( 10.00000000000002700, 38.29207333025046700, 5.000000000000000000 ) ) ;
+#515 = EDGE_CURVE ( 'NONE', #15, #593, #500, .T. ) ;
+#516 = EDGE_CURVE ( 'NONE', #316, #244, #393, .T. ) ;
+#517 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#518 = VECTOR ( 'NONE', #212, 1000.000000000000000 ) ;
+#519 = ORIENTED_EDGE ( 'NONE', *, *, #602, .T. ) ;
+#520 = EDGE_CURVE ( 'NONE', #267, #143, #490, .T. ) ;
+#521 = EDGE_CURVE ( 'NONE', #64, #357, #365, .T. ) ;
+#522 = FACE_OUTER_BOUND ( 'NONE', #47, .T. ) ;
+#523 = EDGE_CURVE ( 'NONE', #66, #64, #315, .T. ) ;
+#524 = EDGE_CURVE ( 'NONE', #548, #122, #65, .T. ) ;
+#525 = ADVANCED_FACE ( 'NONE', ( #528 ), #174, .T. ) ;
+#526 = EDGE_CURVE ( 'NONE', #239, #283, #183, .T. ) ;
+#527 = CIRCLE ( 'NONE', #427, 1.000000000000000900 ) ;
+#528 = FACE_OUTER_BOUND ( 'NONE', #293, .T. ) ;
+#529 = EDGE_CURVE ( 'NONE', #26, #610, #291, .T. ) ;
+#530 = ORIENTED_EDGE ( 'NONE', *, *, #538, .T. ) ;
+#531 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#532 = ADVANCED_FACE ( 'NONE', ( #63, #12, #540 ), #603, .F. ) ;
+#533 = EDGE_CURVE ( 'NONE', #238, #98, #261, .T. ) ;
+#534 = EDGE_LOOP ( 'NONE', ( #233, #19, #203, #402 ) ) ;
+#535 = EDGE_CURVE ( 'NONE', #239, #316, #91, .T. ) ;
+#536 = EDGE_CURVE ( 'NONE', #96, #610, #30, .T. ) ;
+#537 = LINE ( 'NONE', #601, #177 ) ;
+#538 = EDGE_CURVE ( 'NONE', #267, #139, #356, .T. ) ;
+#539 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#540 = FACE_OUTER_BOUND ( 'NONE', #223, .T. ) ;
+#541 = EDGE_CURVE ( 'NONE', #66, #184, #52, .T. ) ;
+#542 = ORIENTED_EDGE ( 'NONE', *, *, #566, .F. ) ;
+#543 = FACE_OUTER_BOUND ( 'NONE', #350, .T. ) ;
+#544 = EDGE_CURVE ( 'NONE', #98, #573, #262, .T. ) ;
+#545 = EDGE_CURVE ( 'NONE', #316, #83, #255, .T. ) ;
+#546 = EDGE_CURVE ( 'NONE', #610, #26, #512, .T. ) ;
+#547 = ORIENTED_EDGE ( 'NONE', *, *, #506, .F. ) ;
+#548 = VERTEX_POINT ( 'NONE', #68 ) ;
+#549 = EDGE_CURVE ( 'NONE', #352, #238, #290, .T. ) ;
+#550 = ORIENTED_EDGE ( 'NONE', *, *, #562, .T. ) ;
+#551 = EDGE_CURVE ( 'NONE', #594, #611, #527, .T. ) ;
+#552 = EDGE_CURVE ( 'NONE', #83, #94, #62, .T. ) ;
+#553 = CARTESIAN_POINT ( 'NONE',  ( -1.000000000000000200, 38.29207333025046700, -5.000000000000000000 ) ) ;
+#554 = EDGE_CURVE ( 'NONE', #143, #43, #46, .T. ) ;
+#555 = EDGE_CURVE ( 'NONE', #593, #15, #167, .T. ) ;
+#556 = LINE ( 'NONE', #486, #385 ) ;
+#557 = EDGE_CURVE ( 'NONE', #357, #244, #381, .T. ) ;
+#558 = VECTOR ( 'NONE', #49, 1000.000000000000000 ) ;
+#559 = ORIENTED_EDGE ( 'NONE', *, *, #605, .F. ) ;
+#560 = CARTESIAN_POINT ( 'NONE',  ( 2.500000000000027500, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#561 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#562 = EDGE_CURVE ( 'NONE', #352, #548, #370, .T. ) ;
+#563 = CARTESIAN_POINT ( 'NONE',  ( 9.000000000000024900, 38.29207333025046700, 5.000000000000000000 ) ) ;
+#564 = EDGE_CURVE ( 'NONE', #93, #96, #264, .T. ) ;
+#565 = CARTESIAN_POINT ( 'NONE',  ( -2.499999999999972900, 40.79207333025047400, 5.000000000000000000 ) ) ;
+#566 = EDGE_CURVE ( 'NONE', #143, #352, #37, .T. ) ;
+#567 = SHAPE_DEFINITION_REPRESENTATION ( #306, #256 ) ;
+#568 = VECTOR ( 'NONE', #373, 1000.000000000000000 ) ;
+#569 = EDGE_CURVE ( 'NONE', #122, #573, #250, .T. ) ;
+#570 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#571 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#572 = EDGE_CURVE ( 'NONE', #43, #548, #24, .T. ) ;
+#573 = VERTEX_POINT ( 'NONE', #269 ) ;
+#574 = ORIENTED_EDGE ( 'NONE', *, *, #541, .T. ) ;
+#575 = ORIENTED_EDGE ( 'NONE', *, *, #549, .T. ) ;
+#576 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#577 = EDGE_CURVE ( 'NONE', #66, #139, #342, .T. ) ;
+#578 = CARTESIAN_POINT ( 'NONE',  ( -4.441596344583464500, 32.42912981364183600, 0.0000000000000000000 ) ) ;
+#579 = CARTESIAN_POINT ( 'NONE',  ( 10.00000000000002700, 38.29207333025046700, 0.0000000000000000000 ) ) ;
+#580 = EDGE_CURVE ( 'NONE', #6, #585, #136, .T. ) ;
+#581 = EDGE_CURVE ( 'NONE', #573, #94, #10, .T. ) ;
+#582 = LINE ( 'NONE', #258, #196 ) ;
+#583 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#584 = EDGE_CURVE ( 'NONE', #611, #593, #221, .T. ) ;
+#585 = VERTEX_POINT ( 'NONE', #178 ) ;
+#586 = ORIENTED_EDGE ( 'NONE', *, *, #562, .F. ) ;
+#587 = ORIENTED_EDGE ( 'NONE', *, *, #592, .F. ) ;
+#588 = EDGE_CURVE ( 'NONE', #386, #267, #607, .T. ) ;
+#589 = EDGE_CURVE ( 'NONE', #96, #93, #213, .T. ) ;
+#590 = ORIENTED_EDGE ( 'NONE', *, *, #521, .F. ) ;
+#591 = EDGE_CURVE ( 'NONE', #594, #15, #319, .T. ) ;
+#592 = EDGE_CURVE ( 'NONE', #98, #83, #582, .T. ) ;
+#593 = VERTEX_POINT ( 'NONE', #563 ) ;
+#594 = VERTEX_POINT ( 'NONE', #176 ) ;
+#595 = LINE ( 'NONE', #114, #204 ) ;
+#596 = EDGE_CURVE ( 'NONE', #139, #340, #400, .T. ) ;
+#597 = ORIENTED_EDGE ( 'NONE', *, *, #608, .F. ) ;
+#598 = CARTESIAN_POINT ( 'NONE',  ( 9.000000000000024900, 38.29207333025046700, -5.000000000000000000 ) ) ;
+#599 = CARTESIAN_POINT ( 'NONE',  ( -2.499999999999975100, 38.79207333025047400, 5.000000000000000000 ) ) ;
+#600 = ADVANCED_FACE ( 'NONE', ( #303 ), #74, .F. ) ;
+#601 = CARTESIAN_POINT ( 'NONE',  ( 12.50000000000002700, 35.79207333025047400, 5.000000000000000000 ) ) ;
+#602 = EDGE_CURVE ( 'NONE', #340, #386, #186, .T. ) ;
+#603 = PLANE ( 'NONE',  #428 ) ;
+#604 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#605 = EDGE_CURVE ( 'NONE', #64, #6, #556, .T. ) ;
+#606 = EDGE_CURVE ( 'NONE', #244, #283, #537, .T. ) ;
+#607 = LINE ( 'NONE', #206, #453 ) ;
+#608 = EDGE_CURVE ( 'NONE', #386, #43, #280, .T. ) ;
+#609 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 38.29207333025046700, 5.000000000000000000 ) ) ;
+#610 = VERTEX_POINT ( 'NONE', #377 ) ;
+#611 = VERTEX_POINT ( 'NONE', #27 ) ;
+#612 = EDGE_CURVE ( 'NONE', #93, #26, #164, .T. ) ;
+#613 = ORIENTED_EDGE ( 'NONE', *, *, #551, .F. ) ;
+#614 = EDGE_CURVE ( 'NONE', #585, #283, #53, .T. ) ;
+ENDSEC;
+END-ISO-10303-21;

Firearms/Sacramento_Pistol-Caboose/STEP/Sear.STEP

@@ -0,0 +1,734 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Sear.STEP',
+    '2013-09-01T22:37:40',
+    ( 'Asher' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = EDGE_CURVE ( 'NONE', #480, #470, #76, .T. ) ;
+#2 = CIRCLE ( 'NONE', #425, 6.081801086451968700 ) ;
+#3 = VECTOR ( 'NONE', #229, 1000.000000000000000 ) ;
+#4 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#5 = FACE_OUTER_BOUND ( 'NONE', #253, .T. ) ;
+#6 = ORIENTED_EDGE ( 'NONE', *, *, #145, .T. ) ;
+#7 = CARTESIAN_POINT ( 'NONE',  ( 138.8096947840913100, 24.06457776306199700, -10.65000000000000000 ) ) ;
+#8 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #198, .NOT_KNOWN. ) ;
+#9 = EDGE_LOOP ( 'NONE', ( #246, #227, #500, #376 ) ) ;
+#10 = DIRECTION ( 'NONE',  ( -0.9931557802597363900, 0.1167972437032409700, 1.709520960062748400E-015 ) ) ;
+#11 = CARTESIAN_POINT ( 'NONE',  ( 138.5357702713155600, 21.73533004631380500, -5.900000000000000400 ) ) ;
+#12 = CIRCLE ( 'NONE', #446, 1.500000000000001300 ) ;
+#13 = VERTEX_POINT ( 'NONE', #709 ) ;
+#14 = LINE ( 'NONE', #609, #346 ) ;
+#15 = EDGE_CURVE ( 'NONE', #55, #153, #260, .T. ) ;
+#16 = ORIENTED_EDGE ( 'NONE', *, *, #361, .F. ) ;
+#17 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#18 = LINE ( 'NONE', #339, #648 ) ;
+#19 = VERTEX_POINT ( 'NONE', #505 ) ;
+#20 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #8, #632 ) ;
+#21 = ORIENTED_EDGE ( 'NONE', *, *, #121, .F. ) ;
+#22 = FACE_OUTER_BOUND ( 'NONE', #107, .T. ) ;
+#23 = DIRECTION ( 'NONE',  ( 8.934370579183164500E-015, 6.133450239491188400E-014, 1.000000000000000000 ) ) ;
+#24 = ORIENTED_EDGE ( 'NONE', *, *, #353, .T. ) ;
+#25 = CARTESIAN_POINT ( 'NONE',  ( 113.4413099869650900, 24.19605953029669400, -10.65000000000000000 ) ) ;
+#26 = EDGE_CURVE ( 'NONE', #452, #152, #677, .T. ) ;
+#27 = VERTEX_POINT ( 'NONE', #714 ) ;
+#28 = ORIENTED_EDGE ( 'NONE', *, *, #154, .F. ) ;
+#29 = PRESENTATION_STYLE_ASSIGNMENT (( #665 ) ) ;
+#30 = AXIS2_PLACEMENT_3D ( 'NONE', #562, #450, #122 ) ;
+#31 = CARTESIAN_POINT ( 'NONE',  ( 110.8527824623648000, 18.69262154031679300, -10.65000000000000000 ) ) ;
+#32 = ADVANCED_FACE ( 'NONE', ( #424, #472 ), #171, .T. ) ;
+#33 = ADVANCED_FACE ( 'NONE', ( #618 ), #398, .T. ) ;
+#34 = EDGE_CURVE ( 'NONE', #627, #541, #456, .T. ) ;
+#35 = VERTEX_POINT ( 'NONE', #174 ) ;
+#36 = COLOUR_RGB ( '',0.6941176470588235100, 0.09411764705882352800, 0.09411764705882352800 ) ;
+#37 = EDGE_CURVE ( 'NONE', #13, #579, #655, .T. ) ;
+#38 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#39 = CARTESIAN_POINT ( 'NONE',  ( 120.8746442524006100, 34.23348978138655200, -5.900000000000000400 ) ) ;
+#40 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#41 = EDGE_LOOP ( 'NONE', ( #305, #256, #509, #240 ) ) ;
+#42 = CARTESIAN_POINT ( 'NONE',  ( 138.6567177772894900, 22.76377653064541200, -10.65000000000000000 ) ) ;
+#43 = EDGE_LOOP ( 'NONE', ( #278, #289, #210, #63 ) ) ;
+#44 = LINE ( 'NONE', #497, #355 ) ;
+#45 = ORIENTED_EDGE ( 'NONE', *, *, #711, .F. ) ;
+#46 = FILL_AREA_STYLE_COLOUR ( '', #36 ) ;
+#47 = CARTESIAN_POINT ( 'NONE',  ( 119.1986214715672600, 19.98185455563597300, -10.65000000000000000 ) ) ;
+#48 = CIRCLE ( 'NONE', #468, 4.216414783677444200 ) ;
+#49 = DIRECTION ( 'NONE',  ( -0.1167972437032409600, -0.9931557802597362800, 0.0000000000000000000 ) ) ;
+#50 = SURFACE_SIDE_STYLE ('',( #590 ) ) ;
+#51 = EDGE_CURVE ( 'NONE', #571, #72, #537, .T. ) ;
+#52 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#53 = DIRECTION ( 'NONE',  ( -0.8016995137686718800, 0.5977272702688702900, -0.0000000000000000000 ) ) ;
+#54 = CARTESIAN_POINT ( 'NONE',  ( 138.8096947840913900, 24.06457776306265500, -2.625489227904539200E-012 ) ) ;
+#55 = VERTEX_POINT ( 'NONE', #294 ) ;
+#56 = CARTESIAN_POINT ( 'NONE',  ( 115.5773376677201200, 29.89041552568512100, -10.65000000000000000 ) ) ;
+#57 = CARTESIAN_POINT ( 'NONE',  ( 107.9138615692716700, 26.73291160420753300, -10.65000000000000000 ) ) ;
+#58 = CIRCLE ( 'NONE', #329, 2.500000000000002200 ) ;
+#59 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#60 = CARTESIAN_POINT ( 'NONE',  ( 119.1986214715672600, 19.98185455563597300, -5.900000000000000400 ) ) ;
+#61 = ORIENTED_EDGE ( 'NONE', *, *, #242, .F. ) ;
+#62 = CARTESIAN_POINT ( 'NONE',  ( 118.6829188221043600, 34.49124137917310400, -10.65000000000000000 ) ) ;
+#63 = ORIENTED_EDGE ( 'NONE', *, *, #518, .T. ) ;
+#64 = ORIENTED_EDGE ( 'NONE', *, *, #555, .T. ) ;
+#65 = CARTESIAN_POINT ( 'NONE',  ( 118.6829188221043600, 34.49124137917310400, -5.900000000000000400 ) ) ;
+#66 = EDGE_CURVE ( 'NONE', #452, #89, #307, .T. ) ;
+#67 = VECTOR ( 'NONE', #98, 1000.000000000000000 ) ;
+#68 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#69 = DIRECTION ( 'NONE',  ( -0.9524655146042089200, -0.3046464237271455700, 0.0000000000000000000 ) ) ;
+#70 = DIRECTION ( 'NONE',  ( -0.3046464237271455700, 0.9524655146042089200, 0.0000000000000000000 ) ) ;
+#71 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #476 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #340, #4, #387 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#72 = VERTEX_POINT ( 'NONE', #578 ) ;
+#73 = DIRECTION ( 'NONE',  ( -0.5594757885736166800, -0.8288466939066172500, 0.0000000000000000000 ) ) ;
+#74 = EDGE_LOOP ( 'NONE', ( #299, #45, #6, #572 ) ) ;
+#75 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #93 ), #71 ) ;
+#76 = LINE ( 'NONE', #57, #176 ) ;
+#77 = LINE ( 'NONE', #576, #193 ) ;
+#78 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -6.938893903907222100E-015, 0.0000000000000000000 ) ) ;
+#79 = ORIENTED_EDGE ( 'NONE', *, *, #686, .F. ) ;
+#80 = EDGE_CURVE ( 'NONE', #566, #498, #354, .T. ) ;
+#81 = ORIENTED_EDGE ( 'NONE', *, *, #670, .F. ) ;
+#82 = LINE ( 'NONE', #701, #139 ) ;
+#83 = LINE ( 'NONE', #47, #250 ) ;
+#84 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #93 ) ) ;
+#85 = ORIENTED_EDGE ( 'NONE', *, *, #37, .T. ) ;
+#86 = LINE ( 'NONE', #39, #519 ) ;
+#87 = EDGE_CURVE ( 'NONE', #579, #615, #680, .T. ) ;
+#88 = EDGE_LOOP ( 'NONE', ( #596, #199 ) ) ;
+#89 = VERTEX_POINT ( 'NONE', #428 ) ;
+#90 = ADVANCED_FACE ( 'NONE', ( #564 ), #268, .F. ) ;
+#91 = LINE ( 'NONE', #261, #3 ) ;
+#92 = ORIENTED_EDGE ( 'NONE', *, *, #80, .F. ) ;
+#93 = STYLED_ITEM ( 'NONE', ( #29 ), #493 ) ;
+#94 = DIRECTION ( 'NONE',  ( -8.934370579183156600E-015, -6.133450239491187200E-014, -1.000000000000000000 ) ) ;
+#95 = CARTESIAN_POINT ( 'NONE',  ( 113.4413099869649100, 24.19605953029680000, -10.65000000000000000 ) ) ;
+#96 = LINE ( 'NONE', #133, #669 ) ;
+#97 = CARTESIAN_POINT ( 'NONE',  ( 107.9138615692716600, 26.73291160420754400, -10.65000000000000000 ) ) ;
+#98 = DIRECTION ( 'NONE',  ( 0.7848553100427362300, 0.6196790639498162000, -0.0000000000000000000 ) ) ;
+#99 = VECTOR ( 'NONE', #503, 1000.000000000000000 ) ;
+#100 = EDGE_CURVE ( 'NONE', #27, #487, #542, .T. ) ;
+#101 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#102 = DIRECTION ( 'NONE',  ( -0.9931557802597363900, 0.1167972437032407200, 0.0000000000000000000 ) ) ;
+#103 = DIRECTION ( 'NONE',  ( -0.6196790639498162000, 0.7848553100427362300, -4.260226749598650400E-014 ) ) ;
+#104 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#105 = CARTESIAN_POINT ( 'NONE',  ( 115.9794352019209400, 18.66919560503380600, -10.65000000000000000 ) ) ;
+#106 = DIRECTION ( 'NONE',  ( 0.1167972437032407200, 0.9931557802597363900, -6.195822544073329900E-014 ) ) ;
+#107 = EDGE_LOOP ( 'NONE', ( #290, #217, #409, #206 ) ) ;
+#108 = ORIENTED_EDGE ( 'NONE', *, *, #699, .T. ) ;
+#109 = DIRECTION ( 'NONE',  ( -0.9931557802597368300, 0.1167972437032371400, 0.0000000000000000000 ) ) ;
+#110 = CARTESIAN_POINT ( 'NONE',  ( 107.9138615692716700, 26.73291160420753300, -10.65000000000000000 ) ) ;
+#111 = CARTESIAN_POINT ( 'NONE',  ( 138.8096947840911900, 24.06457776306240200, -5.900000000000000400 ) ) ;
+#112 = DIRECTION ( 'NONE',  ( 0.1167972437032371400, 0.9931557802597368300, -0.0000000000000000000 ) ) ;
+#113 = PLANE ( 'NONE',  #357 ) ;
+#114 = CARTESIAN_POINT ( 'NONE',  ( 138.9445606242766500, 25.21137527722242000, -10.65000000000000000 ) ) ;
+#115 = CARTESIAN_POINT ( 'NONE',  ( 138.0685812965023700, 17.76270692527468500, -5.900000000000000400 ) ) ;
+#116 = ADVANCED_FACE ( 'NONE', ( #295 ), #688, .T. ) ;
+#117 = ORIENTED_EDGE ( 'NONE', *, *, #538, .T. ) ;
+#118 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#119 = ORIENTED_EDGE ( 'NONE', *, *, #528, .F. ) ;
+#120 = PLANE ( 'NONE',  #373 ) ;
+#121 = EDGE_CURVE ( 'NONE', #584, #566, #18, .T. ) ;
+#122 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#123 = LINE ( 'NONE', #170, #696 ) ;
+#124 = DIRECTION ( 'NONE',  ( 0.9259778791667913100, 0.3775777632405953300, 0.0000000000000000000 ) ) ;
+#125 = ORIENTED_EDGE ( 'NONE', *, *, #66, .T. ) ;
+#126 = FACE_OUTER_BOUND ( 'NONE', #394, .T. ) ;
+#127 = CARTESIAN_POINT ( 'NONE',  ( 97.77778148286594700, 23.49088288863917400, -10.65000000000000000 ) ) ;
+#128 = ORIENTED_EDGE ( 'NONE', *, *, #230, .F. ) ;
+#129 = ORIENTED_EDGE ( 'NONE', *, *, #168, .F. ) ;
+#130 = ORIENTED_EDGE ( 'NONE', *, *, #145, .F. ) ;
+#131 = CARTESIAN_POINT ( 'NONE',  ( 124.8472673734395900, 33.76630080657360400, -5.900000000000000400 ) ) ;
+#132 = EDGE_CURVE ( 'NONE', #471, #455, #86, .T. ) ;
+#133 = CARTESIAN_POINT ( 'NONE',  ( 100.1560584018812500, 15.40036909725770700, -10.65000000000000000 ) ) ;
+#134 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#135 = ORIENTED_EDGE ( 'NONE', *, *, #538, .F. ) ;
+#136 = CARTESIAN_POINT ( 'NONE',  ( 138.0685812965023700, 17.76270692527468500, -5.900000000000000400 ) ) ;
+#137 = VECTOR ( 'NONE', #237, 1000.000000000000000 ) ;
+#138 = ORIENTED_EDGE ( 'NONE', *, *, #34, .T. ) ;
+#139 = VECTOR ( 'NONE', #713, 1000.000000000000000 ) ;
+#140 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #502 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #59, #444, #118 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#141 = VECTOR ( 'NONE', #645, 1000.000000000000000 ) ;
+#142 = LINE ( 'NONE', #172, #682 ) ;
+#143 = LINE ( 'NONE', #391, #475 ) ;
+#144 = VECTOR ( 'NONE', #273, 1000.000000000000000 ) ;
+#145 = EDGE_CURVE ( 'NONE', #498, #480, #664, .T. ) ;
+#146 = ORIENTED_EDGE ( 'NONE', *, *, #255, .F. ) ;
+#147 = ORIENTED_EDGE ( 'NONE', *, *, #242, .T. ) ;
+#148 = AXIS2_PLACEMENT_3D ( 'NONE', #54, #336, #712 ) ;
+#149 = ADVANCED_FACE ( 'NONE', ( #674 ), #379, .T. ) ;
+#150 = ADVANCED_FACE ( 'NONE', ( #304 ), #347, .T. ) ;
+#151 = EDGE_LOOP ( 'NONE', ( #135, #533, #448, #586 ) ) ;
+#152 = VERTEX_POINT ( 'NONE', #392 ) ;
+#153 = VERTEX_POINT ( 'NONE', #459 ) ;
+#154 = EDGE_CURVE ( 'NONE', #414, #196, #608, .T. ) ;
+#155 = ORIENTED_EDGE ( 'NONE', *, *, #621, .F. ) ;
+#156 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#157 = CARTESIAN_POINT ( 'NONE',  ( 124.8472673734395900, 33.76630080657360400, -10.65000000000000000 ) ) ;
+#158 = ORIENTED_EDGE ( 'NONE', *, *, #203, .T. ) ;
+#159 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#160 = DIRECTION ( 'NONE',  ( -0.5594757885736166800, -0.8288466939066172500, 0.0000000000000000000 ) ) ;
+#161 = AXIS2_PLACEMENT_3D ( 'NONE', #607, #276, #660 ) ;
+#162 = ORIENTED_EDGE ( 'NONE', *, *, #706, .F. ) ;
+#163 = CARTESIAN_POINT ( 'NONE',  ( 133.3595048003894300, 18.33373285671089500, -10.65000000000000000 ) ) ;
+#164 = CYLINDRICAL_SURFACE ( 'NONE', #531, 1.500000000000001300 ) ;
+#165 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#166 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#167 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#168 = EDGE_CURVE ( 'NONE', #571, #615, #82, .T. ) ;
+#169 = CARTESIAN_POINT ( 'NONE',  ( 136.1738283266402000, 23.05576963990380800, -5.900000000000000400 ) ) ;
+#170 = CARTESIAN_POINT ( 'NONE',  ( 124.8472673734395900, 33.76630080657360400, -5.900000000000000400 ) ) ;
+#171 = PLANE ( 'NONE',  #662 ) ;
+#172 = CARTESIAN_POINT ( 'NONE',  ( 110.8527824623648000, 18.69262154031679300, -10.65000000000000000 ) ) ;
+#173 = VERTEX_POINT ( 'NONE', #704 ) ;
+#174 = CARTESIAN_POINT ( 'NONE',  ( 114.9413099869650900, 24.19605953029669400, -10.65000000000000000 ) ) ;
+#175 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #228 ) ;
+#176 = VECTOR ( 'NONE', #653, 1000.000000000000100 ) ;
+#177 = FACE_OUTER_BOUND ( 'NONE', #396, .T. ) ;
+#178 = DIRECTION ( 'NONE',  ( 0.9557550780072338000, 0.2941636124053861900, -0.0000000000000000000 ) ) ;
+#179 = AXIS2_PLACEMENT_3D ( 'NONE', #333, #112, #501 ) ;
+#180 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#181 = ORIENTED_EDGE ( 'NONE', *, *, #553, .T. ) ;
+#182 = ORIENTED_EDGE ( 'NONE', *, *, #271, .T. ) ;
+#183 = CARTESIAN_POINT ( 'NONE',  ( 138.8096947840913300, 24.06457776306229200, -5.900000000000000400 ) ) ;
+#184 = EDGE_CURVE ( 'NONE', #257, #526, #324, .T. ) ;
+#185 = ORIENTED_EDGE ( 'NONE', *, *, #353, .F. ) ;
+#186 = CARTESIAN_POINT ( 'NONE',  ( 118.6829188221043600, 34.49124137917310400, -5.900000000000000400 ) ) ;
+#187 = LINE ( 'NONE', #384, #663 ) ;
+#188 = SURFACE_STYLE_FILL_AREA ( #613 ) ;
+#189 = CARTESIAN_POINT ( 'NONE',  ( 115.9794352019209400, 18.66919560503380600, -10.65000000000000000 ) ) ;
+#190 = VECTOR ( 'NONE', #160, 1000.000000000000200 ) ;
+#191 = ORIENTED_EDGE ( 'NONE', *, *, #263, .T. ) ;
+#192 = AXIS2_PLACEMENT_3D ( 'NONE', #527, #685, #410 ) ;
+#193 = VECTOR ( 'NONE', #603, 1000.000000000000000 ) ;
+#194 = CIRCLE ( 'NONE', #236, 2.500000000000002200 ) ;
+#195 = EDGE_CURVE ( 'NONE', #153, #487, #469, .T. ) ;
+#196 = VERTEX_POINT ( 'NONE', #668 ) ;
+#197 = VERTEX_POINT ( 'NONE', #667 ) ;
+#198 = PRODUCT ( 'Sear', 'Sear', '', ( #508 ) ) ;
+#199 = ORIENTED_EDGE ( 'NONE', *, *, #361, .T. ) ;
+#200 = EDGE_CURVE ( 'NONE', #27, #13, #431, .T. ) ;
+#201 = AXIS2_PLACEMENT_3D ( 'NONE', #496, #602, #272 ) ;
+#202 = CIRCLE ( 'NONE', #249, 6.081801086451898500 ) ;
+#203 = EDGE_CURVE ( 'NONE', #35, #197, #283, .T. ) ;
+#204 = ORIENTED_EDGE ( 'NONE', *, *, #486, .T. ) ;
+#205 = ADVANCED_FACE ( 'NONE', ( #695 ), #164, .F. ) ;
+#206 = ORIENTED_EDGE ( 'NONE', *, *, #499, .T. ) ;
+#207 = CARTESIAN_POINT ( 'NONE',  ( 124.8472673734395900, 33.76630080657360400, -10.65000000000000000 ) ) ;
+#208 = CARTESIAN_POINT ( 'NONE',  ( 110.8527824623648000, 18.69262154031679300, -5.900000000000000400 ) ) ;
+#209 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#210 = ORIENTED_EDGE ( 'NONE', *, *, #686, .T. ) ;
+#211 = VERTEX_POINT ( 'NONE', #606 ) ;
+#212 = LINE ( 'NONE', #11, #67 ) ;
+#213 = EDGE_CURVE ( 'NONE', #173, #197, #536, .T. ) ;
+#214 = CARTESIAN_POINT ( 'NONE',  ( 136.9582490637571400, 25.44496976462919600, -5.899999999999997700 ) ) ;
+#215 = DIRECTION ( 'NONE',  ( 0.9931557802597363900, -0.1167972437032407200, 0.0000000000000000000 ) ) ;
+#216 = DIRECTION ( 'NONE',  ( -8.934370579183164500E-015, -6.133450239491188400E-014, -1.000000000000000000 ) ) ;
+#217 = ORIENTED_EDGE ( 'NONE', *, *, #463, .F. ) ;
+#218 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 1.110223024625155600E-014, 0.0000000000000000000 ) ) ;
+#219 = DIRECTION ( 'NONE',  ( -0.1167972437032407200, -0.9931557802597363900, 6.050740384299128400E-014 ) ) ;
+#220 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#221 = PLANE ( 'NONE',  #148 ) ;
+#222 = CARTESIAN_POINT ( 'NONE',  ( 100.1560584018812500, 15.40036909725770700, -10.65000000000000000 ) ) ;
+#223 = ORIENTED_EDGE ( 'NONE', *, *, #275, .F. ) ;
+#224 = EDGE_CURVE ( 'NONE', #19, #173, #286, .T. ) ;
+#225 = CARTESIAN_POINT ( 'NONE',  ( 115.5773376677201200, 29.89041552568512100, -10.65000000000000000 ) ) ;
+#226 = CARTESIAN_POINT ( 'NONE',  ( 136.1738283266402600, 23.05576963990416700, -2.598260705410320100E-012 ) ) ;
+#227 = ORIENTED_EDGE ( 'NONE', *, *, #461, .F. ) ;
+#228 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#229 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#230 = EDGE_CURVE ( 'NONE', #471, #666, #14, .T. ) ;
+#231 = EDGE_LOOP ( 'NONE', ( #119, #489, #129, #598 ) ) ;
+#232 = CARTESIAN_POINT ( 'NONE',  ( 138.9445606242766800, 25.21137527722270400, -5.900000000000000400 ) ) ;
+#233 = VECTOR ( 'NONE', #73, 1000.000000000000200 ) ;
+#234 = LINE ( 'NONE', #114, #99 ) ;
+#235 = PLANE ( 'NONE',  #401 ) ;
+#236 = AXIS2_PLACEMENT_3D ( 'NONE', #169, #558, #218 ) ;
+#237 = DIRECTION ( 'NONE',  ( -0.9931557802597363900, 0.1167972437032407200, -0.0000000000000000000 ) ) ;
+#238 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#239 = CYLINDRICAL_SURFACE ( 'NONE', #411, 2.499999999999998700 ) ;
+#240 = ORIENTED_EDGE ( 'NONE', *, *, #474, .T. ) ;
+#241 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#242 = EDGE_CURVE ( 'NONE', #666, #267, #77, .T. ) ;
+#243 = EDGE_LOOP ( 'NONE', ( #146, #633, #661, #679 ) ) ;
+#244 = CARTESIAN_POINT ( 'NONE',  ( 113.4413099869649100, 24.19605953029680000, -10.65000000000000000 ) ) ;
+#245 = FACE_OUTER_BOUND ( 'NONE', #521, .T. ) ;
+#246 = ORIENTED_EDGE ( 'NONE', *, *, #15, .F. ) ;
+#247 = ADVANCED_FACE ( 'NONE', ( #371 ), #545, .T. ) ;
+#248 = ORIENTED_EDGE ( 'NONE', *, *, #417, .T. ) ;
+#249 = AXIS2_PLACEMENT_3D ( 'NONE', #707, #377, #52 ) ;
+#250 = VECTOR ( 'NONE', #17, 1000.000000000000000 ) ;
+#251 = LINE ( 'NONE', #225, #515 ) ;
+#252 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #587 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #104, #494, #166 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#253 = EDGE_LOOP ( 'NONE', ( #385, #117, #628, #580 ) ) ;
+#254 = VERTEX_POINT ( 'NONE', #559 ) ;
+#255 = EDGE_CURVE ( 'NONE', #400, #402, #629, .T. ) ;
+#256 = ORIENTED_EDGE ( 'NONE', *, *, #407, .F. ) ;
+#257 = VERTEX_POINT ( 'NONE', #504 ) ;
+#258 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #297 ), #252 ) ;
+#259 = VECTOR ( 'NONE', #178, 1000.000000000000200 ) ;
+#260 = CIRCLE ( 'NONE', #693, 6.081801086451968700 ) ;
+#261 = CARTESIAN_POINT ( 'NONE',  ( 97.77778148286594700, 23.49088288863917400, -10.65000000000000000 ) ) ;
+#262 = ORIENTED_EDGE ( 'NONE', *, *, #51, .F. ) ;
+#263 = EDGE_CURVE ( 'NONE', #89, #557, #335, .T. ) ;
+#264 = CARTESIAN_POINT ( 'NONE',  ( 118.6829188221043600, 34.49124137917310400, -10.65000000000000000 ) ) ;
+#265 = DIRECTION ( 'NONE',  ( -8.764918615461766700E-015, -5.989361053898872500E-014, -1.000000000000000000 ) ) ;
+#266 = ORIENTED_EDGE ( 'NONE', *, *, #66, .F. ) ;
+#267 = VERTEX_POINT ( 'NONE', #513 ) ;
+#268 = PLANE ( 'NONE',  #617 ) ;
+#269 = VECTOR ( 'NONE', #23, 1000.000000000000000 ) ;
+#270 = CARTESIAN_POINT ( 'NONE',  ( 107.9138615692716600, 26.73291160420754400, -5.900000000000000400 ) ) ;
+#271 = EDGE_CURVE ( 'NONE', #526, #452, #44, .T. ) ;
+#272 = DIRECTION ( 'NONE',  ( 0.1167972437032378500, 0.9931557802597367200, 0.0000000000000000000 ) ) ;
+#273 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#274 = DIRECTION ( 'NONE',  ( 8.934370579183156600E-015, 6.133450239491187200E-014, 1.000000000000000000 ) ) ;
+#275 = EDGE_CURVE ( 'NONE', #470, #414, #473, .T. ) ;
+#276 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#277 = ORIENTED_EDGE ( 'NONE', *, *, #132, .T. ) ;
+#278 = ORIENTED_EDGE ( 'NONE', *, *, #195, .F. ) ;
+#279 = CARTESIAN_POINT ( 'NONE',  ( 115.5773376677201200, 29.89041552568512100, -5.900000000000000400 ) ) ;
+#280 = CARTESIAN_POINT ( 'NONE',  ( 118.6829188221043600, 34.49124137917310400, -10.65000000000000000 ) ) ;
+#281 = SURFACE_SIDE_STYLE ('',( #188 ) ) ;
+#282 = CARTESIAN_POINT ( 'NONE',  ( 97.77778148286594700, 23.49088288863917400, -5.900000000000000400 ) ) ;
+#283 = LINE ( 'NONE', #656, #568 ) ;
+#284 = LINE ( 'NONE', #214, #569 ) ;
+#285 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #297 ) ) ;
+#286 = LINE ( 'NONE', #614, #141 ) ;
+#287 = CARTESIAN_POINT ( 'NONE',  ( 107.9138615692716600, 26.73291160420754400, -10.65000000000000000 ) ) ;
+#288 = AXIS2_PLACEMENT_3D ( 'NONE', #264, #646, #330 ) ;
+#289 = ORIENTED_EDGE ( 'NONE', *, *, #367, .F. ) ;
+#290 = ORIENTED_EDGE ( 'NONE', *, *, #132, .F. ) ;
+#291 = FACE_BOUND ( 'NONE', #358, .T. ) ;
+#292 = CARTESIAN_POINT ( 'NONE',  ( 115.9794352019209400, 18.66919560503380600, -10.65000000000000000 ) ) ;
+#293 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#294 = CARTESIAN_POINT ( 'NONE',  ( 110.8527824623648000, 18.69262154031679300, -5.900000000000000400 ) ) ;
+#295 = FACE_OUTER_BOUND ( 'NONE', #151, .T. ) ;
+#296 = VECTOR ( 'NONE', #698, 1000.000000000000200 ) ;
+#297 = STYLED_ITEM ( 'NONE', ( #449 ), #637 ) ;
+#298 = EDGE_LOOP ( 'NONE', ( #108, #61, #185, #248 ) ) ;
+#299 = ORIENTED_EDGE ( 'NONE', *, *, #647, .F. ) ;
+#300 = ORIENTED_EDGE ( 'NONE', *, *, #224, .F. ) ;
+#301 = AXIS2_PLACEMENT_3D ( 'NONE', #95, #640, #549 ) ;
+#302 = ORIENTED_EDGE ( 'NONE', *, *, #213, .F. ) ;
+#303 = ORIENTED_EDGE ( 'NONE', *, *, #474, .F. ) ;
+#304 = FACE_OUTER_BOUND ( 'NONE', #43, .T. ) ;
+#305 = ORIENTED_EDGE ( 'NONE', *, *, #343, .F. ) ;
+#306 = AXIS2_PLACEMENT_3D ( 'NONE', #429, #101, #491 ) ;
+#307 = LINE ( 'NONE', #136, #328 ) ;
+#308 = CARTESIAN_POINT ( 'NONE',  ( 133.3595048003894600, 20.83373285671118700, -5.900000000000000400 ) ) ;
+#309 = ORIENTED_EDGE ( 'NONE', *, *, #203, .F. ) ;
+#310 = ADVANCED_FACE ( 'NONE', ( #691, #291 ), #460, .F. ) ;
+#311 = EDGE_CURVE ( 'NONE', #541, #254, #143, .T. ) ;
+#312 = ADVANCED_FACE ( 'NONE', ( #245 ), #611, .F. ) ;
+#313 = ORIENTED_EDGE ( 'NONE', *, *, #350, .F. ) ;
+#314 = CARTESIAN_POINT ( 'NONE',  ( 134.9087024602639500, 18.87159458160404300, -10.65000000000004700 ) ) ;
+#315 = EDGE_LOOP ( 'NONE', ( #21, #543, #583, #412, #155, #432, #552, #181, #138, #522, #79, #574, #28, #223, #565, #130, #92 ) ) ;
+#316 = VECTOR ( 'NONE', #551, 1000.000000000000200 ) ;
+#317 = CARTESIAN_POINT ( 'NONE',  ( 133.3595048003894600, 18.33373285671118700, -5.899999999999994100 ) ) ;
+#318 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#319 = AXIS2_PLACEMENT_3D ( 'NONE', #386, #38, #421 ) ;
+#320 = CARTESIAN_POINT ( 'NONE',  ( 133.3595048003894000, 20.83373285671089500, -10.65000000000000000 ) ) ;
+#321 = EDGE_LOOP ( 'NONE', ( #363, #303, #365, #326 ) ) ;
+#322 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#323 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#324 = LINE ( 'NONE', #678, #532 ) ;
+#325 = ORIENTED_EDGE ( 'NONE', *, *, #200, .T. ) ;
+#326 = ORIENTED_EDGE ( 'NONE', *, *, #461, .T. ) ;
+#327 = CARTESIAN_POINT ( 'NONE',  ( 113.4413099869650900, 24.19605953029669400, -10.65000000000000000 ) ) ;
+#328 = VECTOR ( 'NONE', #356, 1000.000000000000100 ) ;
+#329 = AXIS2_PLACEMENT_3D ( 'NONE', #320, #697, #368 ) ;
+#330 = DIRECTION ( 'NONE',  ( -0.5594757885736166800, -0.8288466939066172500, 0.0000000000000000000 ) ) ;
+#331 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 6.140921104957900900E-014 ) ) ;
+#332 = COLOUR_RGB ( '',0.6941176470588235100, 0.09411764705882352800, 0.09411764705882352800 ) ;
+#333 = CARTESIAN_POINT ( 'NONE',  ( 120.8746442524006100, 34.23348978138655200, -10.65000000000000000 ) ) ;
+#334 = CARTESIAN_POINT ( 'NONE',  ( 133.3595048003894600, 20.83373285671118700, -5.900000000000146900 ) ) ;
+#335 = LINE ( 'NONE', #510, #464 ) ;
+#336 = DIRECTION ( 'NONE',  ( -0.5977272702688702900, -0.8016995137686718800, 5.325570932510622800E-014 ) ) ;
+#337 = AXIS2_PLACEMENT_3D ( 'NONE', #447, #10, #49 ) ;
+#338 = FACE_OUTER_BOUND ( 'NONE', #9, .T. ) ;
+#339 = CARTESIAN_POINT ( 'NONE',  ( 120.8746442524006100, 34.23348978138655200, -10.65000000000000000 ) ) ;
+#340 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#341 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#342 = ORIENTED_EDGE ( 'NONE', *, *, #647, .T. ) ;
+#343 = EDGE_CURVE ( 'NONE', #402, #211, #48, .T. ) ;
+#344 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#345 = CLOSED_SHELL ( 'NONE', ( #362, #205, #585, #247, #149, #479, #540, #636, #689, #150, #32, #310, #312, #477, #413, #534, #90, #116, #33, #692, #681 ) ) ;
+#346 = VECTOR ( 'NONE', #573, 1000.000000000000200 ) ;
+#347 = PLANE ( 'NONE',  #575 ) ;
+#348 = CARTESIAN_POINT ( 'NONE',  ( 113.4413099869650900, 24.19605953029669400, -5.900000000000000400 ) ) ;
+#349 = CIRCLE ( 'NONE', #306, 1.500000000000001300 ) ;
+#350 = EDGE_CURVE ( 'NONE', #197, #173, #642, .T. ) ;
+#351 = CARTESIAN_POINT ( 'NONE',  ( 133.3595048003894600, 20.83373285671118700, -5.900000000000146900 ) ) ;
+#352 = DIRECTION ( 'NONE',  ( 8.934370579183156600E-015, 6.133450239491187200E-014, 1.000000000000000000 ) ) ;
+#353 = EDGE_CURVE ( 'NONE', #152, #666, #187, .T. ) ;
+#354 = LINE ( 'NONE', #280, #190 ) ;
+#355 = VECTOR ( 'NONE', #453, 1000.000000000000000 ) ;
+#356 = DIRECTION ( 'NONE',  ( -0.1167972437032409600, -0.9931557802597362800, -0.0000000000000000000 ) ) ;
+#357 = AXIS2_PLACEMENT_3D ( 'NONE', #110, #70, #69 ) ;
+#358 = EDGE_LOOP ( 'NONE', ( #313, #302 ) ) ;
+#359 = EDGE_LOOP ( 'NONE', ( #420, #652, #687, #485 ) ) ;
+#360 = FACE_OUTER_BOUND ( 'NONE', #74, .T. ) ;
+#361 = EDGE_CURVE ( 'NONE', #19, #35, #12, .T. ) ;
+#362 = ADVANCED_FACE ( 'NONE', ( #5 ), #239, .T. ) ;
+#363 = ORIENTED_EDGE ( 'NONE', *, *, #451, .F. ) ;
+#364 = EDGE_LOOP ( 'NONE', ( #16, #631, #418, #309 ) ) ;
+#365 = ORIENTED_EDGE ( 'NONE', *, *, #154, .T. ) ;
+#366 = DIRECTION ( 'NONE',  ( -0.9931557802597363900, 0.1167972437032407200, -0.0000000000000000000 ) ) ;
+#367 = EDGE_CURVE ( 'NONE', #442, #153, #516, .T. ) ;
+#368 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#369 = FACE_OUTER_BOUND ( 'NONE', #715, .T. ) ;
+#370 = FACE_OUTER_BOUND ( 'NONE', #478, .T. ) ;
+#371 = FACE_OUTER_BOUND ( 'NONE', #321, .T. ) ;
+#372 = CARTESIAN_POINT ( 'NONE',  ( 138.5357702713153900, 21.73533004631400100, -2.538374664615171200E-012 ) ) ;
+#373 = AXIS2_PLACEMENT_3D ( 'NONE', #115, #106, #102 ) ;
+#374 = FILL_AREA_STYLE ('',( #46 ) ) ;
+#375 = VECTOR ( 'NONE', #550, 1000.000000000000100 ) ;
+#376 = ORIENTED_EDGE ( 'NONE', *, *, #367, .T. ) ;
+#377 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#378 = VERTEX_POINT ( 'NONE', #279 ) ;
+#379 = CYLINDRICAL_SURFACE ( 'NONE', #582, 4.216414783677444200 ) ;
+#380 = EDGE_CURVE ( 'NONE', #480, #400, #702, .T. ) ;
+#381 = CARTESIAN_POINT ( 'NONE',  ( 113.4413099869649100, 24.19605953029680000, -5.900000000000000400 ) ) ;
+#382 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#383 = ORIENTED_EDGE ( 'NONE', *, *, #621, .T. ) ;
+#384 = CARTESIAN_POINT ( 'NONE',  ( 138.9445606242766800, 25.21137527722270400, -5.900000000000000400 ) ) ;
+#385 = ORIENTED_EDGE ( 'NONE', *, *, #34, .F. ) ;
+#386 = CARTESIAN_POINT ( 'NONE',  ( 113.4413099869650900, 24.19605953029669400, -10.65000000000000000 ) ) ;
+#387 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#388 = DIRECTION ( 'NONE',  ( -0.9931557802597363900, 0.1167972437032407200, -0.0000000000000000000 ) ) ;
+#389 = FACE_OUTER_BOUND ( 'NONE', #359, .T. ) ;
+#390 = VECTOR ( 'NONE', #274, 1000.000000000000000 ) ;
+#391 = CARTESIAN_POINT ( 'NONE',  ( 138.0685812965023400, 17.76270692527439400, -10.65000000000000000 ) ) ;
+#392 = CARTESIAN_POINT ( 'NONE',  ( 136.9582490637571400, 25.44496976462919600, -5.900000000000000400 ) ) ;
+#393 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#394 = EDGE_LOOP ( 'NONE', ( #454, #147, #64, #415 ) ) ;
+#395 = EDGE_CURVE ( 'NONE', #196, #442, #2, .T. ) ;
+#396 = EDGE_LOOP ( 'NONE', ( #683, #623, #589, #716 ) ) ;
+#397 = ORIENTED_EDGE ( 'NONE', *, *, #26, .T. ) ;
+#398 = CYLINDRICAL_SURFACE ( 'NONE', #635, 2.499999999999998700 ) ;
+#399 = CARTESIAN_POINT ( 'NONE',  ( 113.4413099869650900, 24.19605953029669400, -10.65000000000000000 ) ) ;
+#400 = VERTEX_POINT ( 'NONE', #270 ) ;
+#401 = AXIS2_PLACEMENT_3D ( 'NONE', #232, #219, #215 ) ;
+#402 = VERTEX_POINT ( 'NONE', #282 ) ;
+#403 = ORIENTED_EDGE ( 'NONE', *, *, #184, .F. ) ;
+#404 = CARTESIAN_POINT ( 'NONE',  ( 137.7230259865147600, 21.09363136479696300, -5.899999999999954200 ) ) ;
+#405 = PLANE ( 'NONE',  #337 ) ;
+#406 = LINE ( 'NONE', #65, #233 ) ;
+#407 = EDGE_CURVE ( 'NONE', #470, #402, #91, .T. ) ;
+#408 = ORIENTED_EDGE ( 'NONE', *, *, #417, .F. ) ;
+#409 = ORIENTED_EDGE ( 'NONE', *, *, #121, .T. ) ;
+#410 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#411 = AXIS2_PLACEMENT_3D ( 'NONE', #334, #352, #331 ) ;
+#412 = ORIENTED_EDGE ( 'NONE', *, *, #184, .T. ) ;
+#413 = ADVANCED_FACE ( 'NONE', ( #581 ), #235, .F. ) ;
+#414 = VERTEX_POINT ( 'NONE', #222 ) ;
+#415 = ORIENTED_EDGE ( 'NONE', *, *, #463, .T. ) ;
+#416 = SHAPE_DEFINITION_REPRESENTATION ( #659, #493 ) ;
+#417 = EDGE_CURVE ( 'NONE', #152, #257, #284, .T. ) ;
+#418 = ORIENTED_EDGE ( 'NONE', *, *, #213, .T. ) ;
+#419 = ORIENTED_EDGE ( 'NONE', *, *, #528, .T. ) ;
+#420 = ORIENTED_EDGE ( 'NONE', *, *, #311, .F. ) ;
+#421 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#422 = LINE ( 'NONE', #208, #259 ) ;
+#423 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#424 = FACE_OUTER_BOUND ( 'NONE', #315, .T. ) ;
+#425 = AXIS2_PLACEMENT_3D ( 'NONE', #244, #241, #238 ) ;
+#426 = CARTESIAN_POINT ( 'NONE',  ( 118.6829188221043600, 34.49124137917310400, -10.65000000000000000 ) ) ;
+#427 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#428 = CARTESIAN_POINT ( 'NONE',  ( 138.6567177772895400, 22.76377653064570700, -5.900000000000000400 ) ) ;
+#429 = CARTESIAN_POINT ( 'NONE',  ( 113.4413099869650900, 24.19605953029669400, -10.65000000000000000 ) ) ;
+#430 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#431 = CIRCLE ( 'NONE', #626, 2.500000000000002200 ) ;
+#432 = ORIENTED_EDGE ( 'NONE', *, *, #706, .T. ) ;
+#433 = ORIENTED_EDGE ( 'NONE', *, *, #343, .T. ) ;
+#434 = SURFACE_STYLE_USAGE ( .BOTH. , #50 ) ;
+#435 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#436 = DIRECTION ( 'NONE',  ( 0.9259778791667914200, 0.3775777632405953900, 0.0000000000000000000 ) ) ;
+#437 = CARTESIAN_POINT ( 'NONE',  ( 98.96691994237363600, 19.44562599294845400, -10.65000000000000000 ) ) ;
+#438 = PLANE ( 'NONE',  #179 ) ;
+#439 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#440 = VECTOR ( 'NONE', #94, 1000.000000000000000 ) ;
+#441 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#442 = VERTEX_POINT ( 'NONE', #189 ) ;
+#443 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#444 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#445 = CARTESIAN_POINT ( 'NONE',  ( 113.4413099869649100, 24.19605953029680000, -5.900000000000000400 ) ) ;
+#446 = AXIS2_PLACEMENT_3D ( 'NONE', #327, #322, #318 ) ;
+#447 = CARTESIAN_POINT ( 'NONE',  ( 134.1246695209666200, -15.77334797221849700, -1.983881540917828100E-013 ) ) ;
+#448 = ORIENTED_EDGE ( 'NONE', *, *, #87, .F. ) ;
+#449 = PRESENTATION_STYLE_ASSIGNMENT (( #434 ) ) ;
+#450 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#451 = EDGE_CURVE ( 'NONE', #211, #55, #422, .T. ) ;
+#452 = VERTEX_POINT ( 'NONE', #183 ) ;
+#453 = DIRECTION ( 'NONE',  ( 8.764918615461763600E-015, 5.989361053898872500E-014, 1.000000000000000000 ) ) ;
+#454 = ORIENTED_EDGE ( 'NONE', *, *, #230, .T. ) ;
+#455 = VERTEX_POINT ( 'NONE', #186 ) ;
+#456 = CIRCLE ( 'NONE', #192, 2.500000000000002200 ) ;
+#457 = AXIS2_PLACEMENT_3D ( 'NONE', #399, #393, #439 ) ;
+#458 = ORIENTED_EDGE ( 'NONE', *, *, #26, .F. ) ;
+#459 = CARTESIAN_POINT ( 'NONE',  ( 115.9794352019209400, 18.66919560503380600, -5.900000000000000400 ) ) ;
+#460 = PLANE ( 'NONE',  #481 ) ;
+#461 = EDGE_CURVE ( 'NONE', #196, #55, #142, .T. ) ;
+#462 = ORIENTED_EDGE ( 'NONE', *, *, #670, .T. ) ;
+#463 = EDGE_CURVE ( 'NONE', #584, #471, #123, .T. ) ;
+#464 = VECTOR ( 'NONE', #490, 1000.000000000000000 ) ;
+#465 = ORIENTED_EDGE ( 'NONE', *, *, #610, .F. ) ;
+#466 = LINE ( 'NONE', #643, #316 ) ;
+#467 = ORIENTED_EDGE ( 'NONE', *, *, #263, .F. ) ;
+#468 = AXIS2_PLACEMENT_3D ( 'NONE', #563, #554, #495 ) ;
+#469 = LINE ( 'NONE', #675, #296 ) ;
+#470 = VERTEX_POINT ( 'NONE', #127 ) ;
+#471 = VERTEX_POINT ( 'NONE', #131 ) ;
+#472 = FACE_BOUND ( 'NONE', #88, .T. ) ;
+#473 = CIRCLE ( 'NONE', #524, 4.216414783677444200 ) ;
+#474 = EDGE_CURVE ( 'NONE', #414, #211, #96, .T. ) ;
+#475 = VECTOR ( 'NONE', #388, 1000.000000000000000 ) ;
+#476 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #340, 'distance_accuracy_value', 'NONE');
+#477 = ADVANCED_FACE ( 'NONE', ( #389 ), #120, .F. ) ;
+#478 = EDGE_LOOP ( 'NONE', ( #403, #408, #458, #638 ) ) ;
+#479 = ADVANCED_FACE ( 'NONE', ( #529 ), #113, .T. ) ;
+#480 = VERTEX_POINT ( 'NONE', #97 ) ;
+#481 = AXIS2_PLACEMENT_3D ( 'NONE', #445, #427, #423 ) ;
+#482 = VECTOR ( 'NONE', #544, 1000.000000000000200 ) ;
+#483 = AXIS2_PLACEMENT_3D ( 'NONE', #348, #344, #341 ) ;
+#484 = CARTESIAN_POINT ( 'NONE',  ( 133.0675116911313300, 18.35084340606155700, -10.65000000000000000 ) ) ;
+#485 = ORIENTED_EDGE ( 'NONE', *, *, #518, .F. ) ;
+#486 = EDGE_CURVE ( 'NONE', #455, #378, #406, .T. ) ;
+#487 = VERTEX_POINT ( 'NONE', #60 ) ;
+#488 = CARTESIAN_POINT ( 'NONE',  ( 137.7230259865147000, 21.09363136479666400, -10.65000000000000000 ) ) ;
+#489 = ORIENTED_EDGE ( 'NONE', *, *, #87, .T. ) ;
+#490 = DIRECTION ( 'NONE',  ( -8.934370579183164500E-015, -6.133450239491188400E-014, -1.000000000000000000 ) ) ;
+#491 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#492 = LINE ( 'NONE', #317, #514 ) ;
+#493 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Sear', ( #637, #30 ), #140 ) ;
+#494 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#495 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#496 = CARTESIAN_POINT ( 'NONE',  ( 119.2273328170707000, -14.02138931666952200, 0.0000000000000000000 ) ) ;
+#497 = CARTESIAN_POINT ( 'NONE',  ( 138.8096947840913900, 24.06457776306264800, -2.625489227904538800E-012 ) ) ;
+#498 = VERTEX_POINT ( 'NONE', #56 ) ;
+#499 = EDGE_CURVE ( 'NONE', #566, #455, #546, .T. ) ;
+#500 = ORIENTED_EDGE ( 'NONE', *, *, #395, .T. ) ;
+#501 = DIRECTION ( 'NONE',  ( -0.9931557802597368300, 0.1167972437032371400, 0.0000000000000000000 ) ) ;
+#502 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #59, 'distance_accuracy_value', 'NONE');
+#503 = DIRECTION ( 'NONE',  ( -0.9931557802597363900, 0.1167972437032407200, -0.0000000000000000000 ) ) ;
+#504 = CARTESIAN_POINT ( 'NONE',  ( 136.9582490637571100, 25.44496976462890100, -10.65000000000000000 ) ) ;
+#505 = CARTESIAN_POINT ( 'NONE',  ( 111.9413099869650900, 24.19605953029669400, -10.65000000000000000 ) ) ;
+#506 = EDGE_LOOP ( 'NONE', ( #128, #277, #204, #342, #703, #433, #593, #539, #556, #708, #325, #85, #419, #462, #266, #397, #24 ) ) ;
+#507 = DIRECTION ( 'NONE',  ( -0.9931557802597368300, 0.1167972437032371400, 0.0000000000000000000 ) ) ;
+#508 = PRODUCT_CONTEXT ( 'NONE', #228, 'mechanical' ) ;
+#509 = ORIENTED_EDGE ( 'NONE', *, *, #275, .T. ) ;
+#510 = CARTESIAN_POINT ( 'NONE',  ( 138.6567177772894900, 22.76377653064541600, -10.65000000000006400 ) ) ;
+#511 = AXIS2_PLACEMENT_3D ( 'NONE', #567, #523, #520 ) ;
+#512 = VECTOR ( 'NONE', #710, 1000.000000000000200 ) ;
+#513 = CARTESIAN_POINT ( 'NONE',  ( 124.0472239203805500, 26.96333393277119900, -10.65000000000000000 ) ) ;
+#514 = VECTOR ( 'NONE', #694, 1000.000000000000000 ) ;
+#515 = VECTOR ( 'NONE', #441, 1000.000000000000000 ) ;
+#516 = LINE ( 'NONE', #292, #634 ) ;
+#517 = CARTESIAN_POINT ( 'NONE',  ( 107.9138615692716700, 26.73291160420753300, -5.900000000000000400 ) ) ;
+#518 = EDGE_CURVE ( 'NONE', #254, #487, #83, .T. ) ;
+#519 = VECTOR ( 'NONE', #109, 1000.000000000000100 ) ;
+#520 = DIRECTION ( 'NONE',  ( 0.9557550780072338000, 0.2941636124053861900, 0.0000000000000000000 ) ) ;
+#521 = EDGE_LOOP ( 'NONE', ( #300, #465, #158, #525 ) ) ;
+#522 = ORIENTED_EDGE ( 'NONE', *, *, #311, .T. ) ;
+#523 = DIRECTION ( 'NONE',  ( 0.2941636124053862400, -0.9557550780072339200, 0.0000000000000000000 ) ) ;
+#524 = AXIS2_PLACEMENT_3D ( 'NONE', #437, #435, #430 ) ;
+#525 = ORIENTED_EDGE ( 'NONE', *, *, #350, .T. ) ;
+#526 = VERTEX_POINT ( 'NONE', #7 ) ;
+#527 = CARTESIAN_POINT ( 'NONE',  ( 133.3595048003894000, 20.83373285671089500, -10.65000000000000000 ) ) ;
+#528 = EDGE_CURVE ( 'NONE', #579, #72, #212, .T. ) ;
+#529 = FACE_OUTER_BOUND ( 'NONE', #243, .T. ) ;
+#530 = CIRCLE ( 'NONE', #161, 2.500000000000002200 ) ;
+#531 = AXIS2_PLACEMENT_3D ( 'NONE', #622, #620, #651 ) ;
+#532 = VECTOR ( 'NONE', #672, 1000.000000000000100 ) ;
+#533 = ORIENTED_EDGE ( 'NONE', *, *, #553, .F. ) ;
+#534 = ADVANCED_FACE ( 'NONE', ( #369 ), #405, .F. ) ;
+#535 = EDGE_LOOP ( 'NONE', ( #81, #262, #162, #467 ) ) ;
+#536 = CIRCLE ( 'NONE', #547, 1.500000000000001300 ) ;
+#537 = LINE ( 'NONE', #404, #269 ) ;
+#538 = EDGE_CURVE ( 'NONE', #627, #13, #492, .T. ) ;
+#539 = ORIENTED_EDGE ( 'NONE', *, *, #15, .T. ) ;
+#540 = ADVANCED_FACE ( 'NONE', ( #360 ), #625, .T. ) ;
+#541 = VERTEX_POINT ( 'NONE', #484 ) ;
+#542 = LINE ( 'NONE', #619, #137 ) ;
+#543 = ORIENTED_EDGE ( 'NONE', *, *, #555, .F. ) ;
+#544 = DIRECTION ( 'NONE',  ( 0.1167972437032378500, 0.9931557802597367200, -0.0000000000000000000 ) ) ;
+#545 = PLANE ( 'NONE',  #511 ) ;
+#546 = LINE ( 'NONE', #62, #644 ) ;
+#547 = AXIS2_PLACEMENT_3D ( 'NONE', #595, #592, #577 ) ;
+#548 = LINE ( 'NONE', #654, #684 ) ;
+#549 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#550 = DIRECTION ( 'NONE',  ( -0.9524655146042088100, -0.3046464237271455700, 0.0000000000000000000 ) ) ;
+#551 = DIRECTION ( 'NONE',  ( 0.1167972437032408500, 0.9931557802597362800, 0.0000000000000000000 ) ) ;
+#552 = ORIENTED_EDGE ( 'NONE', *, *, #168, .T. ) ;
+#553 = EDGE_CURVE ( 'NONE', #615, #627, #58, .T. ) ;
+#554 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#555 = EDGE_CURVE ( 'NONE', #267, #584, #630, .T. ) ;
+#556 = ORIENTED_EDGE ( 'NONE', *, *, #195, .T. ) ;
+#557 = VERTEX_POINT ( 'NONE', #42 ) ;
+#558 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#559 = CARTESIAN_POINT ( 'NONE',  ( 119.1986214715672600, 19.98185455563597300, -10.65000000000000000 ) ) ;
+#560 = CARTESIAN_POINT ( 'NONE',  ( 113.4413099869649100, 24.19605953029680000, -10.65000000000000000 ) ) ;
+#561 = DIRECTION ( 'NONE',  ( 8.934370579183156600E-015, 6.133450239491187200E-014, 1.000000000000000000 ) ) ;
+#562 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#563 = CARTESIAN_POINT ( 'NONE',  ( 98.96691994237363600, 19.44562599294845400, -5.900000000000000400 ) ) ;
+#564 = FACE_OUTER_BOUND ( 'NONE', #231, .T. ) ;
+#565 = ORIENTED_EDGE ( 'NONE', *, *, #1, .F. ) ;
+#566 = VERTEX_POINT ( 'NONE', #426 ) ;
+#567 = CARTESIAN_POINT ( 'NONE',  ( 110.8527824623648000, 18.69262154031679300, -10.65000000000000000 ) ) ;
+#568 = VECTOR ( 'NONE', #658, 1000.000000000000000 ) ;
+#569 = VECTOR ( 'NONE', #265, 1000.000000000000000 ) ;
+#570 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #180 ) ;
+#571 = VERTEX_POINT ( 'NONE', #488 ) ;
+#572 = ORIENTED_EDGE ( 'NONE', *, *, #380, .T. ) ;
+#573 = DIRECTION ( 'NONE',  ( -0.1167972437032378500, -0.9931557802597367200, 0.0000000000000000000 ) ) ;
+#574 = ORIENTED_EDGE ( 'NONE', *, *, #395, .F. ) ;
+#575 = AXIS2_PLACEMENT_3D ( 'NONE', #105, #588, #124 ) ;
+#576 = CARTESIAN_POINT ( 'NONE',  ( 124.0472239203805500, 26.96333393277119900, -5.900000000000000400 ) ) ;
+#577 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#578 = CARTESIAN_POINT ( 'NONE',  ( 137.7230259865147600, 21.09363136479695900, -5.900000000000000400 ) ) ;
+#579 = VERTEX_POINT ( 'NONE', #591 ) ;
+#580 = ORIENTED_EDGE ( 'NONE', *, *, #690, .F. ) ;
+#581 = FACE_OUTER_BOUND ( 'NONE', #298, .T. ) ;
+#582 = AXIS2_PLACEMENT_3D ( 'NONE', #601, #323, #68 ) ;
+#583 = ORIENTED_EDGE ( 'NONE', *, *, #699, .F. ) ;
+#584 = VERTEX_POINT ( 'NONE', #157 ) ;
+#585 = ADVANCED_FACE ( 'NONE', ( #338 ), #612, .T. ) ;
+#586 = ORIENTED_EDGE ( 'NONE', *, *, #37, .F. ) ;
+#587 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #104, 'distance_accuracy_value', 'NONE');
+#588 = DIRECTION ( 'NONE',  ( 0.3775777632405953900, -0.9259778791667914200, 0.0000000000000000000 ) ) ;
+#589 = ORIENTED_EDGE ( 'NONE', *, *, #80, .T. ) ;
+#590 = SURFACE_STYLE_FILL_AREA ( #374 ) ;
+#591 = CARTESIAN_POINT ( 'NONE',  ( 134.9087024602640100, 18.87159458160433400, -5.900000000000000400 ) ) ;
+#592 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#593 = ORIENTED_EDGE ( 'NONE', *, *, #451, .T. ) ;
+#594 = PLANE ( 'NONE',  #288 ) ;
+#595 = CARTESIAN_POINT ( 'NONE',  ( 113.4413099869650900, 24.19605953029669400, -5.900000000000000400 ) ) ;
+#596 = ORIENTED_EDGE ( 'NONE', *, *, #610, .T. ) ;
+#597 = AXIS2_PLACEMENT_3D ( 'NONE', #351, #561, #616 ) ;
+#598 = ORIENTED_EDGE ( 'NONE', *, *, #51, .T. ) ;
+#599 = CARTESIAN_POINT ( 'NONE',  ( 124.0472239203806000, 26.96333393277131700, -5.900000000000000400 ) ) ;
+#600 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, -6.133450239491189700E-014 ) ) ;
+#601 = CARTESIAN_POINT ( 'NONE',  ( 98.96691994237363600, 19.44562599294845400, -10.65000000000000000 ) ) ;
+#602 = DIRECTION ( 'NONE',  ( 0.9931557802597368300, -0.1167972437032378700, 0.0000000000000000000 ) ) ;
+#603 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#604 = AXIS2_PLACEMENT_3D ( 'NONE', #25, #209, #156 ) ;
+#605 = CARTESIAN_POINT ( 'NONE',  ( 133.0675116911313900, 18.35084340606184500, -5.899999999999998600 ) ) ;
+#606 = CARTESIAN_POINT ( 'NONE',  ( 100.1560584018812500, 15.40036909725770700, -5.900000000000000400 ) ) ;
+#607 = CARTESIAN_POINT ( 'NONE',  ( 136.1738283266401800, 23.05576963990351700, -10.65000000000000000 ) ) ;
+#608 = LINE ( 'NONE', #31, #512 ) ;
+#609 = CARTESIAN_POINT ( 'NONE',  ( 124.8472673734395900, 33.76630080657360400, -5.900000000000000400 ) ) ;
+#610 = EDGE_CURVE ( 'NONE', #35, #19, #349, .T. ) ;
+#611 = CYLINDRICAL_SURFACE ( 'NONE', #457, 1.500000000000001300 ) ;
+#612 = CYLINDRICAL_SURFACE ( 'NONE', #301, 6.081801086451968700 ) ;
+#613 = FILL_AREA_STYLE ('',( #717 ) ) ;
+#614 = CARTESIAN_POINT ( 'NONE',  ( 111.9413099869650900, 24.19605953029669400, -10.65000000000000000 ) ) ;
+#615 = VERTEX_POINT ( 'NONE', #700 ) ;
+#616 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 6.140921104957900900E-014 ) ) ;
+#617 = AXIS2_PLACEMENT_3D ( 'NONE', #372, #103, #705 ) ;
+#618 = FACE_OUTER_BOUND ( 'NONE', #535, .T. ) ;
+#619 = CARTESIAN_POINT ( 'NONE',  ( 138.0685812965023700, 17.76270692527468500, -5.900000000000000400 ) ) ;
+#620 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#621 = EDGE_CURVE ( 'NONE', #557, #526, #466, .T. ) ;
+#622 = CARTESIAN_POINT ( 'NONE',  ( 113.4413099869650900, 24.19605953029669400, -10.65000000000000000 ) ) ;
+#623 = ORIENTED_EDGE ( 'NONE', *, *, #499, .F. ) ;
+#624 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 2.775557561562889000E-015, 0.0000000000000000000 ) ) ;
+#625 = CYLINDRICAL_SURFACE ( 'NONE', #319, 6.081801086451898500 ) ;
+#626 = AXIS2_PLACEMENT_3D ( 'NONE', #641, #639, #624 ) ;
+#627 = VERTEX_POINT ( 'NONE', #163 ) ;
+#628 = ORIENTED_EDGE ( 'NONE', *, *, #200, .F. ) ;
+#629 = LINE ( 'NONE', #517, #375 ) ;
+#630 = LINE ( 'NONE', #207, #482 ) ;
+#631 = ORIENTED_EDGE ( 'NONE', *, *, #224, .T. ) ;
+#632 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #180, 'design' ) ;
+#633 = ORIENTED_EDGE ( 'NONE', *, *, #380, .F. ) ;
+#634 = VECTOR ( 'NONE', #293, 1000.000000000000000 ) ;
+#635 = AXIS2_PLACEMENT_3D ( 'NONE', #226, #216, #600 ) ;
+#636 = ADVANCED_FACE ( 'NONE', ( #177 ), #594, .T. ) ;
+#637 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude3', #345 ) ;
+#638 = ORIENTED_EDGE ( 'NONE', *, *, #271, .F. ) ;
+#639 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#640 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#641 = CARTESIAN_POINT ( 'NONE',  ( 133.3595048003894600, 20.83373285671118700, -5.900000000000000400 ) ) ;
+#642 = CIRCLE ( 'NONE', #483, 1.500000000000001300 ) ;
+#643 = CARTESIAN_POINT ( 'NONE',  ( 138.0685812965023400, 17.76270692527439400, -10.65000000000000000 ) ) ;
+#644 = VECTOR ( 'NONE', #40, 1000.000000000000000 ) ;
+#645 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#646 = DIRECTION ( 'NONE',  ( -0.8288466939066173600, 0.5594757885736167900, 0.0000000000000000000 ) ) ;
+#647 = EDGE_CURVE ( 'NONE', #378, #400, #202, .T. ) ;
+#648 = VECTOR ( 'NONE', #507, 1000.000000000000100 ) ;
+#649 = PLANE ( 'NONE',  #201 ) ;
+#650 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #198 ) ) ;
+#651 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#652 = ORIENTED_EDGE ( 'NONE', *, *, #690, .T. ) ;
+#653 = DIRECTION ( 'NONE',  ( -0.9524655146042088100, -0.3046464237271455700, 0.0000000000000000000 ) ) ;
+#654 = CARTESIAN_POINT ( 'NONE',  ( 115.9794352019209400, 18.66919560503380600, -10.65000000000000000 ) ) ;
+#655 = CIRCLE ( 'NONE', #673, 2.500000000000002200 ) ;
+#656 = CARTESIAN_POINT ( 'NONE',  ( 114.9413099869650900, 24.19605953029669400, -10.65000000000000000 ) ) ;
+#657 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#658 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#659 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #20 ) ;
+#660 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#661 = ORIENTED_EDGE ( 'NONE', *, *, #1, .T. ) ;
+#662 = AXIS2_PLACEMENT_3D ( 'NONE', #560, #382, #220 ) ;
+#663 = VECTOR ( 'NONE', #366, 1000.000000000000000 ) ;
+#664 = CIRCLE ( 'NONE', #604, 6.081801086451898500 ) ;
+#665 = SURFACE_STYLE_USAGE ( .BOTH. , #281 ) ;
+#666 = VERTEX_POINT ( 'NONE', #599 ) ;
+#667 = CARTESIAN_POINT ( 'NONE',  ( 114.9413099869650900, 24.19605953029669400, -5.900000000000000400 ) ) ;
+#668 = CARTESIAN_POINT ( 'NONE',  ( 110.8527824623648000, 18.69262154031679300, -10.65000000000000000 ) ) ;
+#669 = VECTOR ( 'NONE', #167, 1000.000000000000000 ) ;
+#670 = EDGE_CURVE ( 'NONE', #72, #89, #194, .T. ) ;
+#671 = LINE ( 'NONE', #605, #390 ) ;
+#672 = DIRECTION ( 'NONE',  ( 0.8016995137686718800, -0.5977272702688702900, -0.0000000000000000000 ) ) ;
+#673 = AXIS2_PLACEMENT_3D ( 'NONE', #308, #134, #78 ) ;
+#674 = FACE_OUTER_BOUND ( 'NONE', #41, .T. ) ;
+#675 = CARTESIAN_POINT ( 'NONE',  ( 115.9794352019209400, 18.66919560503380600, -5.900000000000000400 ) ) ;
+#676 = VECTOR ( 'NONE', #53, 1000.000000000000100 ) ;
+#677 = LINE ( 'NONE', #111, #676 ) ;
+#678 = CARTESIAN_POINT ( 'NONE',  ( 122.4418672149815700, 36.26802397338180100, -10.65000000000000000 ) ) ;
+#679 = ORIENTED_EDGE ( 'NONE', *, *, #407, .T. ) ;
+#680 = LINE ( 'NONE', #314, #440 ) ;
+#681 = ADVANCED_FACE ( 'NONE', ( #126 ), #649, .T. ) ;
+#682 = VECTOR ( 'NONE', #165, 1000.000000000000000 ) ;
+#683 = ORIENTED_EDGE ( 'NONE', *, *, #486, .F. ) ;
+#684 = VECTOR ( 'NONE', #436, 1000.000000000000200 ) ;
+#685 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#686 = EDGE_CURVE ( 'NONE', #442, #254, #548, .T. ) ;
+#687 = ORIENTED_EDGE ( 'NONE', *, *, #100, .T. ) ;
+#688 = CYLINDRICAL_SURFACE ( 'NONE', #597, 2.499999999999998700 ) ;
+#689 = ADVANCED_FACE ( 'NONE', ( #22 ), #438, .T. ) ;
+#690 = EDGE_CURVE ( 'NONE', #541, #27, #671, .T. ) ;
+#691 = FACE_OUTER_BOUND ( 'NONE', #506, .T. ) ;
+#692 = ADVANCED_FACE ( 'NONE', ( #370 ), #221, .F. ) ;
+#693 = AXIS2_PLACEMENT_3D ( 'NONE', #381, #443, #657 ) ;
+#694 = DIRECTION ( 'NONE',  ( 8.934370579183156600E-015, 6.133450239491187200E-014, 1.000000000000000000 ) ) ;
+#695 = FACE_OUTER_BOUND ( 'NONE', #364, .T. ) ;
+#696 = VECTOR ( 'NONE', #159, 1000.000000000000000 ) ;
+#697 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#698 = DIRECTION ( 'NONE',  ( 0.9259778791667914200, 0.3775777632405953900, 0.0000000000000000000 ) ) ;
+#699 = EDGE_CURVE ( 'NONE', #257, #267, #234, .T. ) ;
+#700 = CARTESIAN_POINT ( 'NONE',  ( 134.9087024602639500, 18.87159458160404000, -10.65000000000000000 ) ) ;
+#701 = CARTESIAN_POINT ( 'NONE',  ( 124.2744329601301400, 10.47535379006989200, -10.65000000000000000 ) ) ;
+#702 = LINE ( 'NONE', #287, #144 ) ;
+#703 = ORIENTED_EDGE ( 'NONE', *, *, #255, .T. ) ;
+#704 = CARTESIAN_POINT ( 'NONE',  ( 111.9413099869650900, 24.19605953029669400, -5.900000000000000400 ) ) ;
+#705 = DIRECTION ( 'NONE',  ( -8.934370579183162900E-015, -6.133450239491187200E-014, -1.000000000000000000 ) ) ;
+#706 = EDGE_CURVE ( 'NONE', #557, #571, #530, .T. ) ;
+#707 = CARTESIAN_POINT ( 'NONE',  ( 113.4413099869650900, 24.19605953029669400, -5.900000000000000400 ) ) ;
+#708 = ORIENTED_EDGE ( 'NONE', *, *, #100, .F. ) ;
+#709 = CARTESIAN_POINT ( 'NONE',  ( 133.3595048003894300, 18.33373285671118700, -5.900000000000000400 ) ) ;
+#710 = DIRECTION ( 'NONE',  ( 0.9557550780072338000, 0.2941636124053861900, -0.0000000000000000000 ) ) ;
+#711 = EDGE_CURVE ( 'NONE', #498, #378, #251, .T. ) ;
+#712 = DIRECTION ( 'NONE',  ( 8.764918615461763600E-015, 5.989361053898872500E-014, 1.000000000000000000 ) ) ;
+#713 = DIRECTION ( 'NONE',  ( -0.7848553100427362300, -0.6196790639498162000, -0.0000000000000000000 ) ) ;
+#714 = CARTESIAN_POINT ( 'NONE',  ( 133.0675116911313900, 18.35084340606184500, -5.900000000000000400 ) ) ;
+#715 = EDGE_LOOP ( 'NONE', ( #383, #182, #125, #191 ) ) ;
+#716 = ORIENTED_EDGE ( 'NONE', *, *, #711, .T. ) ;
+#717 = FILL_AREA_STYLE_COLOUR ( '', #332 ) ;
+ENDSEC;
+END-ISO-10303-21;

Firearms/Sacramento_Pistol-Caboose/STEP/SearPin^StikM1.STEP

@@ -0,0 +1,157 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('SearPin^StikM1.STEP',
+    '2013-09-01T22:37:27',
+    ( 'Asher' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = CARTESIAN_POINT ( 'NONE',  ( 6.850589351894869900, 0.6420733302504756400, -18.23469448074255400 ) ) ;
+#2 = CARTESIAN_POINT ( 'NONE',  ( 6.850589351894869900, 0.6420733302504754200, -21.23469448074255800 ) ) ;
+#3 = EDGE_CURVE ( 'NONE', #92, #93, #79, .T. ) ;
+#4 = ADVANCED_FACE ( 'NONE', ( #118 ), #84, .T. ) ;
+#5 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #81 ) ) ;
+#6 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #21 ), #8 ) ;
+#7 = CARTESIAN_POINT ( 'NONE',  ( 16.85058935189487200, 0.6420733302504754200, -21.23469448074255800 ) ) ;
+#8 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #89 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #112, #109, #108 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#9 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#10 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #98 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #30, #19, #14 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#11 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #35 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #128, #127, #121 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#12 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#13 = EDGE_CURVE ( 'NONE', #91, #92, #73, .T. ) ;
+#14 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#15 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #88, 'design' ) ;
+#16 = CARTESIAN_POINT ( 'NONE',  ( 6.850589351894869900, 0.6420733302504754200, -19.73469448074255800 ) ) ;
+#17 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #21 ) ) ;
+#18 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'SearPin^StikM1', ( #55, #74 ), #11 ) ;
+#19 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#20 = FILL_AREA_STYLE ('',( #34 ) ) ;
+#21 = STYLED_ITEM ( 'NONE', ( #31 ), #18 ) ;
+#22 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #111 ) ) ;
+#23 = SURFACE_SIDE_STYLE ('',( #60 ) ) ;
+#24 = CARTESIAN_POINT ( 'NONE',  ( 16.85058935189487200, 0.6420733302504754200, -19.73469448074255800 ) ) ;
+#25 = SHAPE_DEFINITION_REPRESENTATION ( #99, #18 ) ;
+#26 = SURFACE_STYLE_USAGE ( .BOTH. , #23 ) ;
+#27 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#28 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#29 = CARTESIAN_POINT ( 'NONE',  ( 6.850589351894869900, 0.6420733302504754200, -19.73469448074255800 ) ) ;
+#30 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#31 = PRESENTATION_STYLE_ASSIGNMENT (( #113 ) ) ;
+#32 = SURFACE_STYLE_FILL_AREA ( #116 ) ;
+#33 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#34 = FILL_AREA_STYLE_COLOUR ( '', #68 ) ;
+#35 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #128, 'distance_accuracy_value', 'NONE');
+#36 = ADVANCED_FACE ( 'NONE', ( #71 ), #53, .F. ) ;
+#37 = CARTESIAN_POINT ( 'NONE',  ( 6.850589351894869900, 0.6420733302504754200, -21.23469448074255800 ) ) ;
+#38 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #81 ), #10 ) ;
+#39 = CYLINDRICAL_SURFACE ( 'NONE', #126, 1.500000000000001300 ) ;
+#40 = CARTESIAN_POINT ( 'NONE',  ( 6.850589351894869900, 0.6420733302504754200, -19.73469448074255800 ) ) ;
+#41 = CIRCLE ( 'NONE', #56, 1.500000000000001300 ) ;
+#42 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#43 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#44 = AXIS2_PLACEMENT_3D ( 'NONE', #40, #47, #42 ) ;
+#45 = CIRCLE ( 'NONE', #50, 1.500000000000001300 ) ;
+#46 = VECTOR ( 'NONE', #52, 1000.000000000000000 ) ;
+#47 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#48 = EDGE_CURVE ( 'NONE', #86, #91, #76, .T. ) ;
+#49 = ADVANCED_FACE ( 'NONE', ( #72 ), #62, .T. ) ;
+#50 = AXIS2_PLACEMENT_3D ( 'NONE', #24, #130, #129 ) ;
+#51 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#52 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#53 = PLANE ( 'NONE',  #70 ) ;
+#54 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#55 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #124 ) ;
+#56 = AXIS2_PLACEMENT_3D ( 'NONE', #138, #137, #136 ) ;
+#57 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#58 = PRESENTATION_STYLE_ASSIGNMENT (( #26 ) ) ;
+#59 = CARTESIAN_POINT ( 'NONE',  ( 16.85058935189487200, 0.6420733302504754200, -19.73469448074255800 ) ) ;
+#60 = SURFACE_STYLE_FILL_AREA ( #20 ) ;
+#61 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #63, #15 ) ;
+#62 = CYLINDRICAL_SURFACE ( 'NONE', #44, 1.500000000000001300 ) ;
+#63 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #111, .NOT_KNOWN. ) ;
+#64 = FACE_OUTER_BOUND ( 'NONE', #106, .T. ) ;
+#65 = CARTESIAN_POINT ( 'NONE',  ( 6.850589351894869900, 0.6420733302504756400, -18.23469448074255400 ) ) ;
+#66 = LINE ( 'NONE', #37, #46 ) ;
+#67 = EDGE_CURVE ( 'NONE', #86, #93, #66, .T. ) ;
+#68 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#69 = ADVANCED_FACE ( 'NONE', ( #64 ), #39, .T. ) ;
+#70 = AXIS2_PLACEMENT_3D ( 'NONE', #77, #57, #51 ) ;
+#71 = FACE_OUTER_BOUND ( 'NONE', #83, .T. ) ;
+#72 = FACE_OUTER_BOUND ( 'NONE', #115, .T. ) ;
+#73 = LINE ( 'NONE', #65, #80 ) ;
+#74 = AXIS2_PLACEMENT_3D ( 'NONE', #28, #104, #103 ) ;
+#75 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#76 = CIRCLE ( 'NONE', #131, 1.500000000000001300 ) ;
+#77 = CARTESIAN_POINT ( 'NONE',  ( 16.85058935189487200, 0.6420733302504754200, -19.73469448074255800 ) ) ;
+#78 = EDGE_CURVE ( 'NONE', #91, #86, #41, .T. ) ;
+#79 = CIRCLE ( 'NONE', #122, 1.500000000000001300 ) ;
+#80 = VECTOR ( 'NONE', #54, 1000.000000000000000 ) ;
+#81 = STYLED_ITEM ( 'NONE', ( #58 ), #55 ) ;
+#82 = ORIENTED_EDGE ( 'NONE', *, *, #139, .T. ) ;
+#83 = EDGE_LOOP ( 'NONE', ( #140, #101 ) ) ;
+#84 = PLANE ( 'NONE',  #90 ) ;
+#85 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #88 ) ;
+#86 = VERTEX_POINT ( 'NONE', #2 ) ;
+#87 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#88 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#89 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #112, 'distance_accuracy_value', 'NONE');
+#90 = AXIS2_PLACEMENT_3D ( 'NONE', #125, #75, #95 ) ;
+#91 = VERTEX_POINT ( 'NONE', #1 ) ;
+#92 = VERTEX_POINT ( 'NONE', #133 ) ;
+#93 = VERTEX_POINT ( 'NONE', #7 ) ;
+#94 = ORIENTED_EDGE ( 'NONE', *, *, #78, .T. ) ;
+#95 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#96 = ORIENTED_EDGE ( 'NONE', *, *, #3, .T. ) ;
+#97 = EDGE_LOOP ( 'NONE', ( #107, #94 ) ) ;
+#98 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #30, 'distance_accuracy_value', 'NONE');
+#99 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #61 ) ;
+#100 = ORIENTED_EDGE ( 'NONE', *, *, #13, .F. ) ;
+#101 = ORIENTED_EDGE ( 'NONE', *, *, #3, .F. ) ;
+#102 = PRODUCT_CONTEXT ( 'NONE', #119, 'mechanical' ) ;
+#103 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#104 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#105 = ORIENTED_EDGE ( 'NONE', *, *, #78, .F. ) ;
+#106 = EDGE_LOOP ( 'NONE', ( #105, #135, #96, #110 ) ) ;
+#107 = ORIENTED_EDGE ( 'NONE', *, *, #48, .T. ) ;
+#108 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#109 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#110 = ORIENTED_EDGE ( 'NONE', *, *, #67, .F. ) ;
+#111 = PRODUCT ( 'SearPin^StikM1', 'SearPin^StikM1', '', ( #102 ) ) ;
+#112 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#113 = SURFACE_STYLE_USAGE ( .BOTH. , #114 ) ;
+#114 = SURFACE_SIDE_STYLE ('',( #32 ) ) ;
+#115 = EDGE_LOOP ( 'NONE', ( #100, #132, #123, #82 ) ) ;
+#116 = FILL_AREA_STYLE ('',( #117 ) ) ;
+#117 = FILL_AREA_STYLE_COLOUR ( '', #33 ) ;
+#118 = FACE_OUTER_BOUND ( 'NONE', #97, .T. ) ;
+#119 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#120 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #119 ) ;
+#121 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#122 = AXIS2_PLACEMENT_3D ( 'NONE', #59, #134, #87 ) ;
+#123 = ORIENTED_EDGE ( 'NONE', *, *, #67, .T. ) ;
+#124 = CLOSED_SHELL ( 'NONE', ( #69, #49, #4, #36 ) ) ;
+#125 = CARTESIAN_POINT ( 'NONE',  ( 6.850589351894869900, 0.6420733302504754200, -19.73469448074255800 ) ) ;
+#126 = AXIS2_PLACEMENT_3D ( 'NONE', #16, #9, #12 ) ;
+#127 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#128 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#129 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#130 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#131 = AXIS2_PLACEMENT_3D ( 'NONE', #29, #43, #27 ) ;
+#132 = ORIENTED_EDGE ( 'NONE', *, *, #48, .F. ) ;
+#133 = CARTESIAN_POINT ( 'NONE',  ( 16.85058935189487200, 0.6420733302504756400, -18.23469448074255400 ) ) ;
+#134 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#135 = ORIENTED_EDGE ( 'NONE', *, *, #13, .T. ) ;
+#136 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#137 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#138 = CARTESIAN_POINT ( 'NONE',  ( 6.850589351894869900, 0.6420733302504754200, -19.73469448074255800 ) ) ;
+#139 = EDGE_CURVE ( 'NONE', #93, #92, #45, .T. ) ;
+#140 = ORIENTED_EDGE ( 'NONE', *, *, #139, .F. ) ;
+ENDSEC;
+END-ISO-10303-21;

Firearms/Sacramento_Pistol-Caboose/STEP/Trigger.STEP

@@ -0,0 +1,888 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Trigger.STEP',
+    '2013-09-01T22:36:59',
+    ( 'Asher' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#2 = SURFACE_STYLE_USAGE ( .BOTH. , #423 ) ;
+#3 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#4 = CARTESIAN_POINT ( 'NONE',  ( 49.16284893431463100, 11.99081726724777800, 8.849999999999974800 ) ) ;
+#5 = CIRCLE ( 'NONE', #671, 2.000000000000001800 ) ;
+#6 = CARTESIAN_POINT ( 'NONE',  ( 49.16284893431463100, 11.99081726724777800, -0.9000000000000257800 ) ) ;
+#7 = AXIS2_PLACEMENT_3D ( 'NONE', #476, #563, #553 ) ;
+#8 = CARTESIAN_POINT ( 'NONE',  ( 77.48622281055054400, 21.54460078548725500, 8.849999999999974800 ) ) ;
+#9 = EDGE_LOOP ( 'NONE', ( #250, #294, #661, #292, #521, #487, #416, #415, #102, #691, #187, #217, #634, #841, #792, #445, #845, #741, #251, #666, #151 ) ) ;
+#10 = CARTESIAN_POINT ( 'NONE',  ( 83.33599385302692000, 11.99081726724777800, 8.849999999999974800 ) ) ;
+#11 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#12 = VERTEX_POINT ( 'NONE', #667 ) ;
+#13 = ORIENTED_EDGE ( 'NONE', *, *, #535, .T. ) ;
+#14 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#15 = EDGE_CURVE ( 'NONE', #784, #523, #426, .T. ) ;
+#16 = LINE ( 'NONE', #144, #720 ) ;
+#17 = DIRECTION ( 'NONE',  ( -0.7071067811865503500, -0.7071067811865445800, -0.0000000000000000000 ) ) ;
+#18 = EDGE_CURVE ( 'NONE', #513, #558, #543, .T. ) ;
+#19 = CARTESIAN_POINT ( 'NONE',  ( 82.01677353534569200, 25.01744082421288300, 8.849999999999974800 ) ) ;
+#20 = ORIENTED_EDGE ( 'NONE', *, *, #650, .T. ) ;
+#21 = ORIENTED_EDGE ( 'NONE', *, *, #618, .F. ) ;
+#22 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #497, 'distance_accuracy_value', 'NONE');
+#23 = COLOUR_RGB ( '',0.6941176470588235100, 0.09411764705882352800, 0.09411764705882352800 ) ;
+#24 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #337 ) ) ;
+#25 = AXIS2_PLACEMENT_3D ( 'NONE', #401, #473, #180 ) ;
+#26 = EDGE_LOOP ( 'NONE', ( #344, #611, #218, #266 ) ) ;
+#27 = EDGE_LOOP ( 'NONE', ( #509, #245, #865, #451 ) ) ;
+#28 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#29 = CIRCLE ( 'NONE', #614, 2.000000000000001800 ) ;
+#30 = VECTOR ( 'NONE', #150, 1000.000000000000000 ) ;
+#31 = STYLED_ITEM ( 'NONE', ( #648 ), #684 ) ;
+#32 = CARTESIAN_POINT ( 'NONE',  ( 85.71041741031690700, 24.63580558265774200, -0.9000000000000257800 ) ) ;
+#33 = CARTESIAN_POINT ( 'NONE',  ( 82.04122114246484900, -1.850638918204116700, -0.9000000000000257800 ) ) ;
+#34 = EDGE_CURVE ( 'NONE', #522, #715, #442, .T. ) ;
+#35 = ORIENTED_EDGE ( 'NONE', *, *, #650, .F. ) ;
+#36 = ORIENTED_EDGE ( 'NONE', *, *, #15, .F. ) ;
+#37 = FACE_OUTER_BOUND ( 'NONE', #318, .T. ) ;
+#38 = EDGE_CURVE ( 'NONE', #810, #244, #326, .T. ) ;
+#39 = CARTESIAN_POINT ( 'NONE',  ( 77.72380673909958700, 22.19168790017376800, -0.9000000000000257800 ) ) ;
+#40 = FACE_OUTER_BOUND ( 'NONE', #26, .T. ) ;
+#41 = CARTESIAN_POINT ( 'NONE',  ( 90.51041741031690400, 16.55910363042589900, 8.849999999999974800 ) ) ;
+#42 = CARTESIAN_POINT ( 'NONE',  ( 92.24354219757447000, 16.61456463261923500, 8.849999999999974800 ) ) ;
+#43 = ORIENTED_EDGE ( 'NONE', *, *, #717, .F. ) ;
+#44 = AXIS2_PLACEMENT_3D ( 'NONE', #196, #726, #791 ) ;
+#45 = CARTESIAN_POINT ( 'NONE',  ( 91.54267019438331900, 11.40910363042590000, -0.9000000000000257800 ) ) ;
+#46 = ORIENTED_EDGE ( 'NONE', *, *, #789, .T. ) ;
+#47 = VECTOR ( 'NONE', #84, 1000.000000000000000 ) ;
+#48 = ORIENTED_EDGE ( 'NONE', *, *, #758, .F. ) ;
+#49 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#50 = LINE ( 'NONE', #670, #757 ) ;
+#51 = CARTESIAN_POINT ( 'NONE',  ( 85.71041741031690700, 24.63580558265774200, -0.9000000000000257800 ) ) ;
+#52 = EDGE_CURVE ( 'NONE', #523, #704, #316, .T. ) ;
+#53 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #71, 'design' ) ;
+#54 = CARTESIAN_POINT ( 'NONE',  ( 78.73417987749998300, 23.38213768876516600, 8.849999999999974800 ) ) ;
+#55 = CARTESIAN_POINT ( 'NONE',  ( 85.42435572089112800, 28.42502300975830600, -0.9000000000000257800 ) ) ;
+#56 = EDGE_CURVE ( 'NONE', #752, #319, #357, .T. ) ;
+#57 = ORIENTED_EDGE ( 'NONE', *, *, #38, .T. ) ;
+#58 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#59 = CARTESIAN_POINT ( 'NONE',  ( 82.84886591372522000, -3.114644425888227100, 8.849999999999974800 ) ) ;
+#60 = ORIENTED_EDGE ( 'NONE', *, *, #785, .F. ) ;
+#61 = FACE_OUTER_BOUND ( 'NONE', #77, .T. ) ;
+#62 = CARTESIAN_POINT ( 'NONE',  ( 82.43824865624770800, 19.77230857553095700, -0.9000000000000257800 ) ) ;
+#63 = CARTESIAN_POINT ( 'NONE',  ( 83.33599385302692000, 11.99081726724777800, -0.9000000000000257800 ) ) ;
+#64 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #337, .NOT_KNOWN. ) ;
+#65 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #138 ) ;
+#66 = AXIS2_PLACEMENT_3D ( 'NONE', #6, #871, #867 ) ;
+#67 = CIRCLE ( 'NONE', #560, 1.500000000000001300 ) ;
+#68 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#69 = LINE ( 'NONE', #373, #493 ) ;
+#70 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#71 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#72 = ORIENTED_EDGE ( 'NONE', *, *, #772, .F. ) ;
+#73 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#74 = ORIENTED_EDGE ( 'NONE', *, *, #708, .T. ) ;
+#75 = EDGE_CURVE ( 'NONE', #176, #293, #130, .T. ) ;
+#76 = CYLINDRICAL_SURFACE ( 'NONE', #572, 4.799999999999970500 ) ;
+#77 = EDGE_LOOP ( 'NONE', ( #35, #311, #737, #561 ) ) ;
+#78 = FACE_OUTER_BOUND ( 'NONE', #774, .T. ) ;
+#79 = CARTESIAN_POINT ( 'NONE',  ( 81.30966675415913900, 25.72454760539943700, -0.9000000000000257800 ) ) ;
+#80 = DIRECTION ( 'NONE',  ( -0.6470871146865109200, -0.7624160714509409200, 0.0000000000000000000 ) ) ;
+#81 = AXIS2_PLACEMENT_3D ( 'NONE', #55, #268, #683 ) ;
+#82 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#83 = DIRECTION ( 'NONE',  ( -0.7624160714509409200, 0.6470871146865109200, 0.0000000000000000000 ) ) ;
+#84 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#85 = EDGE_LOOP ( 'NONE', ( #72, #723, #601, #345 ) ) ;
+#86 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#87 = VERTEX_POINT ( 'NONE', #99 ) ;
+#88 = ORIENTED_EDGE ( 'NONE', *, *, #490, .F. ) ;
+#89 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 6.938893903907222100E-015, 0.0000000000000000000 ) ) ;
+#90 = EDGE_CURVE ( 'NONE', #393, #159, #67, .T. ) ;
+#91 = CYLINDRICAL_SURFACE ( 'NONE', #223, 1.500000000000001300 ) ;
+#92 = LINE ( 'NONE', #371, #161 ) ;
+#93 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#94 = EDGE_CURVE ( 'NONE', #523, #810, #829, .T. ) ;
+#95 = ORIENTED_EDGE ( 'NONE', *, *, #108, .T. ) ;
+#96 = CIRCLE ( 'NONE', #382, 1.000000000000000900 ) ;
+#97 = CARTESIAN_POINT ( 'NONE',  ( 84.71724893970458900, 29.13212979094485500, -0.9000000000000257800 ) ) ;
+#98 = EDGE_CURVE ( 'NONE', #279, #622, #755, .T. ) ;
+#99 = CARTESIAN_POINT ( 'NONE',  ( 78.43835481378285100, 23.03358835468484900, 8.849999999999974800 ) ) ;
+#100 = EDGE_LOOP ( 'NONE', ( #607, #141 ) ) ;
+#101 = ADVANCED_FACE ( 'NONE', ( #591, #387 ), #714, .T. ) ;
+#102 = ORIENTED_EDGE ( 'NONE', *, *, #580, .F. ) ;
+#103 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#104 = ADVANCED_FACE ( 'NONE', ( #510 ), #842, .T. ) ;
+#105 = ORIENTED_EDGE ( 'NONE', *, *, #832, .T. ) ;
+#106 = FACE_OUTER_BOUND ( 'NONE', #331, .T. ) ;
+#107 = VERTEX_POINT ( 'NONE', #356 ) ;
+#108 = EDGE_CURVE ( 'NONE', #301, #279, #660, .T. ) ;
+#109 = VECTOR ( 'NONE', #216, 1000.000000000000000 ) ;
+#110 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #64, #53 ) ;
+#111 = ORIENTED_EDGE ( 'NONE', *, *, #864, .T. ) ;
+#112 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#113 = LINE ( 'NONE', #355, #820 ) ;
+#114 = EDGE_CURVE ( 'NONE', #697, #87, #808, .T. ) ;
+#115 = CARTESIAN_POINT ( 'NONE',  ( 81.46451914434341300, 19.54460078548725500, 8.849999999999974800 ) ) ;
+#116 = CARTESIAN_POINT ( 'NONE',  ( 80.54122114246483500, -1.850638918204116700, 8.849999999999974800 ) ) ;
+#117 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#118 = CARTESIAN_POINT ( 'NONE',  ( 90.51041741031690400, 18.59667906443786500, -0.9000000000000257800 ) ) ;
+#119 = AXIS2_PLACEMENT_3D ( 'NONE', #736, #123, #681 ) ;
+#120 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 2.081668171172166600E-014, 0.0000000000000000000 ) ) ;
+#121 = ORIENTED_EDGE ( 'NONE', *, *, #303, .T. ) ;
+#122 = ORIENTED_EDGE ( 'NONE', *, *, #662, .F. ) ;
+#123 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#124 = PRESENTATION_STYLE_ASSIGNMENT (( #693 ) ) ;
+#125 = EDGE_LOOP ( 'NONE', ( #215, #620, #46, #600 ) ) ;
+#126 = CIRCLE ( 'NONE', #597, 5.252432370836668700 ) ;
+#127 = CARTESIAN_POINT ( 'NONE',  ( 84.21041741031690700, 24.63580558265774200, -0.9000000000000257800 ) ) ;
+#128 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#129 = EDGE_CURVE ( 'NONE', #483, #393, #771, .T. ) ;
+#130 = CIRCLE ( 'NONE', #518, 1.000000000000000900 ) ;
+#131 = CARTESIAN_POINT ( 'NONE',  ( 82.01677353534569200, 25.01744082421288300, -0.9000000000000257800 ) ) ;
+#132 = CARTESIAN_POINT ( 'NONE',  ( 82.04122114246484900, -1.850638918204116700, -0.9000000000000257800 ) ) ;
+#133 = VECTOR ( 'NONE', #623, 1000.000000000000000 ) ;
+#134 = FILL_AREA_STYLE_COLOUR ( '', #23 ) ;
+#135 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #815, 'distance_accuracy_value', 'NONE');
+#136 = EDGE_CURVE ( 'NONE', #293, #228, #69, .T. ) ;
+#137 = ORIENTED_EDGE ( 'NONE', *, *, #618, .T. ) ;
+#138 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#139 = ORIENTED_EDGE ( 'NONE', *, *, #214, .F. ) ;
+#140 = CIRCLE ( 'NONE', #324, 5.252432370836668700 ) ;
+#141 = ORIENTED_EDGE ( 'NONE', *, *, #640, .F. ) ;
+#142 = AXIS2_PLACEMENT_3D ( 'NONE', #132, #627, #202 ) ;
+#143 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#144 = CARTESIAN_POINT ( 'NONE',  ( 81.05118486367386800, 25.46606571491416200, -0.9000000000000257800 ) ) ;
+#145 = AXIS2_PLACEMENT_3D ( 'NONE', #131, #128, #86 ) ;
+#146 = CARTESIAN_POINT ( 'NONE',  ( 78.48622281055054400, 21.54460078548725500, -0.9000000000000257800 ) ) ;
+#147 = ORIENTED_EDGE ( 'NONE', *, *, #505, .T. ) ;
+#148 = ORIENTED_EDGE ( 'NONE', *, *, #197, .F. ) ;
+#149 = EDGE_CURVE ( 'NONE', #835, #347, #212, .T. ) ;
+#150 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#151 = ORIENTED_EDGE ( 'NONE', *, *, #424, .T. ) ;
+#152 = CYLINDRICAL_SURFACE ( 'NONE', #527, 1.500000000000001300 ) ;
+#153 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#154 = EDGE_CURVE ( 'NONE', #308, #386, #762, .T. ) ;
+#155 = CIRCLE ( 'NONE', #300, 34.17314491871228900 ) ;
+#156 = ADVANCED_FACE ( 'NONE', ( #534 ), #555, .T. ) ;
+#157 = CARTESIAN_POINT ( 'NONE',  ( 92.24354219757447000, 16.61456463261923800, -0.9000000000000257800 ) ) ;
+#158 = AXIS2_PLACEMENT_3D ( 'NONE', #273, #428, #3 ) ;
+#159 = VERTEX_POINT ( 'NONE', #116 ) ;
+#160 = AXIS2_PLACEMENT_3D ( 'NONE', #763, #761, #754 ) ;
+#161 = VECTOR ( 'NONE', #570, 1000.000000000000000 ) ;
+#162 = EDGE_CURVE ( 'NONE', #530, #87, #519, .T. ) ;
+#163 = ORIENTED_EDGE ( 'NONE', *, *, #75, .F. ) ;
+#164 = CARTESIAN_POINT ( 'NONE',  ( 85.71041741031693600, 24.63580558265774200, -0.9000000000000257800 ) ) ;
+#165 = ORIENTED_EDGE ( 'NONE', *, *, #154, .T. ) ;
+#166 = ORIENTED_EDGE ( 'NONE', *, *, #490, .T. ) ;
+#167 = AXIS2_PLACEMENT_3D ( 'NONE', #626, #199, #688 ) ;
+#168 = EDGE_LOOP ( 'NONE', ( #148, #868, #776, #836 ) ) ;
+#169 = VECTOR ( 'NONE', #93, 1000.000000000000000 ) ;
+#170 = ADVANCED_FACE ( 'NONE', ( #399 ), #533, .T. ) ;
+#171 = ADVANCED_FACE ( 'NONE', ( #40 ), #541, .T. ) ;
+#172 = EDGE_CURVE ( 'NONE', #386, #393, #173, .T. ) ;
+#173 = LINE ( 'NONE', #272, #586 ) ;
+#174 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -9.974659986866631300E-015, 0.0000000000000000000 ) ) ;
+#175 = VECTOR ( 'NONE', #49, 1000.000000000000000 ) ;
+#176 = VERTEX_POINT ( 'NONE', #732 ) ;
+#177 = EDGE_LOOP ( 'NONE', ( #377, #230, #806, #455 ) ) ;
+#178 = ORIENTED_EDGE ( 'NONE', *, *, #18, .T. ) ;
+#179 = CARTESIAN_POINT ( 'NONE',  ( 78.48622281055054400, 21.54460078548725500, 8.849999999999974800 ) ) ;
+#180 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#181 = VECTOR ( 'NONE', #103, 1000.000000000000000 ) ;
+#182 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #110 ) ;
+#183 = CARTESIAN_POINT ( 'NONE',  ( 85.71041741031690700, 24.63580558265774200, -0.9000000000000257800 ) ) ;
+#184 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #135 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #815, #422, #1 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#185 = CARTESIAN_POINT ( 'NONE',  ( 89.97733363836110200, 5.009462081021388800, -0.9000000000000257800 ) ) ;
+#186 = AXIS2_PLACEMENT_3D ( 'NONE', #849, #858, #540 ) ;
+#187 = ORIENTED_EDGE ( 'NONE', *, *, #840, .T. ) ;
+#188 = ADVANCED_FACE ( 'NONE', ( #525 ), #322, .F. ) ;
+#189 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#190 = VECTOR ( 'NONE', #491, 1000.000000000000100 ) ;
+#191 = ORIENTED_EDGE ( 'NONE', *, *, #241, .T. ) ;
+#192 = FACE_OUTER_BOUND ( 'NONE', #168, .T. ) ;
+#193 = CARTESIAN_POINT ( 'NONE',  ( 81.02419013851442700, 25.13900644573031300, 8.849999999999974800 ) ) ;
+#194 = CARTESIAN_POINT ( 'NONE',  ( 78.73417987749998300, 23.38213768876516600, 8.849999999999974800 ) ) ;
+#195 = EDGE_CURVE ( 'NONE', #830, #453, #665, .T. ) ;
+#196 = CARTESIAN_POINT ( 'NONE',  ( 79.20077088523379400, 22.38650123999833100, -0.9000000000000257800 ) ) ;
+#197 = EDGE_CURVE ( 'NONE', #159, #715, #205, .T. ) ;
+#198 = ORIENTED_EDGE ( 'NONE', *, *, #468, .T. ) ;
+#199 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#200 = ORIENTED_EDGE ( 'NONE', *, *, #406, .T. ) ;
+#201 = CARTESIAN_POINT ( 'NONE',  ( 90.51041741031690400, 18.59667906443786500, 8.849999999999974800 ) ) ;
+#202 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#203 = CIRCLE ( 'NONE', #857, 1.500000000000001300 ) ;
+#204 = CARTESIAN_POINT ( 'NONE',  ( 77.72380673909958700, 22.19168790017376800, 8.849999999999974800 ) ) ;
+#205 = LINE ( 'NONE', #642, #133 ) ;
+#206 = ADVANCED_FACE ( 'NONE', ( #414 ), #556, .F. ) ;
+#207 = SURFACE_SIDE_STYLE ('',( #310 ) ) ;
+#208 = AXIS2_PLACEMENT_3D ( 'NONE', #296, #828, #823 ) ;
+#209 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#210 = CARTESIAN_POINT ( 'NONE',  ( 80.54122114246483500, -1.850638918204116700, -0.9000000000000257800 ) ) ;
+#211 = CARTESIAN_POINT ( 'NONE',  ( 81.46451914434341300, 20.54460078548725500, 8.849999999999974800 ) ) ;
+#212 = LINE ( 'NONE', #678, #568 ) ;
+#213 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#214 = EDGE_CURVE ( 'NONE', #656, #625, #375, .T. ) ;
+#215 = ORIENTED_EDGE ( 'NONE', *, *, #232, .F. ) ;
+#216 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#217 = ORIENTED_EDGE ( 'NONE', *, *, #154, .F. ) ;
+#218 = ORIENTED_EDGE ( 'NONE', *, *, #809, .F. ) ;
+#219 = CIRCLE ( 'NONE', #475, 5.252432370836668700 ) ;
+#220 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#221 = CIRCLE ( 'NONE', #145, 1.000000000000000900 ) ;
+#222 = LINE ( 'NONE', #185, #175 ) ;
+#223 = AXIS2_PLACEMENT_3D ( 'NONE', #51, #117, #479 ) ;
+#224 = CARTESIAN_POINT ( 'NONE',  ( 84.21041741031690700, 24.63580558265774200, -0.9000000000000257800 ) ) ;
+#225 = CARTESIAN_POINT ( 'NONE',  ( 78.48622281055054400, 20.54460078548725500, -0.9000000000000257800 ) ) ;
+#226 = VECTOR ( 'NONE', #411, 1000.000000000000000 ) ;
+#227 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#228 = VERTEX_POINT ( 'NONE', #565 ) ;
+#229 = EDGE_CURVE ( 'NONE', #656, #308, #155, .T. ) ;
+#230 = ORIENTED_EDGE ( 'NONE', *, *, #717, .T. ) ;
+#231 = CIRCLE ( 'NONE', #512, 1.500000000000001300 ) ;
+#232 = EDGE_CURVE ( 'NONE', #625, #379, #689, .T. ) ;
+#233 = ORIENTED_EDGE ( 'NONE', *, *, #271, .F. ) ;
+#234 = AXIS2_PLACEMENT_3D ( 'NONE', #753, #822, #283 ) ;
+#235 = ORIENTED_EDGE ( 'NONE', *, *, #675, .F. ) ;
+#236 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#237 = AXIS2_PLACEMENT_3D ( 'NONE', #164, #779, #590 ) ;
+#238 = CYLINDRICAL_SURFACE ( 'NONE', #526, 2.000000000000001800 ) ;
+#239 = ORIENTED_EDGE ( 'NONE', *, *, #38, .F. ) ;
+#240 = LINE ( 'NONE', #269, #409 ) ;
+#241 = EDGE_CURVE ( 'NONE', #582, #329, #92, .T. ) ;
+#242 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#243 = CARTESIAN_POINT ( 'NONE',  ( 79.03902334485191300, 25.38213768876517000, -0.9000000000000257800 ) ) ;
+#244 = VERTEX_POINT ( 'NONE', #339 ) ;
+#245 = ORIENTED_EDGE ( 'NONE', *, *, #195, .T. ) ;
+#246 = FACE_OUTER_BOUND ( 'NONE', #679, .T. ) ;
+#247 = CARTESIAN_POINT ( 'NONE',  ( 91.72060907647754400, 6.159686180417573100, -0.9000000000000257800 ) ) ;
+#248 = AXIS2_PLACEMENT_3D ( 'NONE', #504, #499, #495 ) ;
+#249 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#250 = ORIENTED_EDGE ( 'NONE', *, *, #447, .F. ) ;
+#251 = ORIENTED_EDGE ( 'NONE', *, *, #359, .T. ) ;
+#252 = ORIENTED_EDGE ( 'NONE', *, *, #535, .F. ) ;
+#253 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#254 = LINE ( 'NONE', #579, #610 ) ;
+#255 = ORIENTED_EDGE ( 'NONE', *, *, #56, .F. ) ;
+#256 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#257 = EDGE_CURVE ( 'NONE', #293, #697, #575, .T. ) ;
+#258 = CYLINDRICAL_SURFACE ( 'NONE', #751, 34.17314491871228900 ) ;
+#259 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#260 = ADVANCED_FACE ( 'NONE', ( #354 ), #289, .T. ) ;
+#261 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#262 = AXIS2_PLACEMENT_3D ( 'NONE', #412, #861, #482 ) ;
+#263 = CARTESIAN_POINT ( 'NONE',  ( 85.34907632893697400, 29.42218549057425400, 8.849999999999974800 ) ) ;
+#264 = ORIENTED_EDGE ( 'NONE', *, *, #172, .T. ) ;
+#265 = VERTEX_POINT ( 'NONE', #360 ) ;
+#266 = ORIENTED_EDGE ( 'NONE', *, *, #803, .F. ) ;
+#267 = CIRCLE ( 'NONE', #262, 19.41910449038013200 ) ;
+#268 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#269 = CARTESIAN_POINT ( 'NONE',  ( 83.33599385302692000, 11.99081726724777800, -0.9000000000000257800 ) ) ;
+#270 = CARTESIAN_POINT ( 'NONE',  ( 91.54267019438331900, 11.40910363042590000, -0.9000000000000257800 ) ) ;
+#271 = EDGE_CURVE ( 'NONE', #697, #392, #659, .T. ) ;
+#272 = CARTESIAN_POINT ( 'NONE',  ( 80.65873696775570100, -1.268627314643838300, -0.9000000000000257800 ) ) ;
+#273 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#274 = CARTESIAN_POINT ( 'NONE',  ( 78.48622281055054400, 20.54460078548725500, 8.849999999999974800 ) ) ;
+#275 = CARTESIAN_POINT ( 'NONE',  ( 82.04122114246484900, -1.850638918204116700, 8.849999999999974800 ) ) ;
+#276 = EDGE_CURVE ( 'NONE', #625, #520, #747, .T. ) ;
+#277 = CARTESIAN_POINT ( 'NONE',  ( 87.21041741031690700, 24.63580558265774200, 8.849999999999974800 ) ) ;
+#278 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#279 = VERTEX_POINT ( 'NONE', #201 ) ;
+#280 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#281 = CYLINDRICAL_SURFACE ( 'NONE', #282, 1.000000000000000900 ) ;
+#282 = AXIS2_PLACEMENT_3D ( 'NONE', #569, #213, #637 ) ;
+#283 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#284 = CARTESIAN_POINT ( 'NONE',  ( 76.32587077133922500, 20.54460078548725500, 8.849999999999974800 ) ) ;
+#285 = AXIS2_PLACEMENT_3D ( 'NONE', #194, #83, #80 ) ;
+#286 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#287 = CARTESIAN_POINT ( 'NONE',  ( 81.46451914434341300, 20.54460078548725500, 8.849999999999974800 ) ) ;
+#288 = CARTESIAN_POINT ( 'NONE',  ( 85.71041741031693600, 24.63580558265774200, -0.9000000000000257800 ) ) ;
+#289 = PLANE ( 'NONE',  #633 ) ;
+#290 = CARTESIAN_POINT ( 'NONE',  ( 91.78836392586207200, 4.160834189802735700, -0.9000000000000257800 ) ) ;
+#291 = EDGE_CURVE ( 'NONE', #704, #558, #222, .T. ) ;
+#292 = ORIENTED_EDGE ( 'NONE', *, *, #380, .F. ) ;
+#293 = VERTEX_POINT ( 'NONE', #39 ) ;
+#294 = ORIENTED_EDGE ( 'NONE', *, *, #457, .T. ) ;
+#295 = FACE_OUTER_BOUND ( 'NONE', #716, .T. ) ;
+#296 = CARTESIAN_POINT ( 'NONE',  ( 90.51041741031690400, 16.55910363042589900, -0.9000000000000257800 ) ) ;
+#297 = CARTESIAN_POINT ( 'NONE',  ( 82.04122114246484900, -1.850638918204116700, -0.9000000000000257800 ) ) ;
+#298 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#299 = STYLED_ITEM ( 'NONE', ( #124 ), #599 ) ;
+#300 = AXIS2_PLACEMENT_3D ( 'NONE', #364, #405, #400 ) ;
+#301 = VERTEX_POINT ( 'NONE', #42 ) ;
+#302 = FACE_OUTER_BOUND ( 'NONE', #786, .T. ) ;
+#303 = EDGE_CURVE ( 'NONE', #567, #530, #5, .T. ) ;
+#304 = CARTESIAN_POINT ( 'NONE',  ( 82.04122114246484900, -1.850638918204116700, 8.849999999999974800 ) ) ;
+#305 = CARTESIAN_POINT ( 'NONE',  ( 78.48622281055054400, 21.54460078548725500, -0.9000000000000257800 ) ) ;
+#306 = ORIENTED_EDGE ( 'NONE', *, *, #524, .T. ) ;
+#307 = AXIS2_PLACEMENT_3D ( 'NONE', #544, #261, #804 ) ;
+#308 = VERTEX_POINT ( 'NONE', #63 ) ;
+#309 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#310 = SURFACE_STYLE_FILL_AREA ( #629 ) ;
+#311 = ORIENTED_EDGE ( 'NONE', *, *, #241, .F. ) ;
+#312 = FACE_BOUND ( 'NONE', #100, .T. ) ;
+#313 = CARTESIAN_POINT ( 'NONE',  ( 85.42435572089112800, 28.42502300975830600, -0.9000000000000257800 ) ) ;
+#314 = AXIS2_PLACEMENT_3D ( 'NONE', #466, #598, #461 ) ;
+#315 = ADVANCED_FACE ( 'NONE', ( #486 ), #258, .F. ) ;
+#316 = CIRCLE ( 'NONE', #418, 2.000000000000001800 ) ;
+#317 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#318 = EDGE_LOOP ( 'NONE', ( #636, #537, #528, #43 ) ) ;
+#319 = VERTEX_POINT ( 'NONE', #472 ) ;
+#320 = FACE_OUTER_BOUND ( 'NONE', #870, .T. ) ;
+#321 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#322 = CYLINDRICAL_SURFACE ( 'NONE', #450, 2.000000000000001800 ) ;
+#323 = ADVANCED_FACE ( 'NONE', ( #78 ), #778, .T. ) ;
+#324 = AXIS2_PLACEMENT_3D ( 'NONE', #825, #440, #14 ) ;
+#325 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#326 = LINE ( 'NONE', #536, #181 ) ;
+#327 = AXIS2_PLACEMENT_3D ( 'NONE', #313, #492, #286 ) ;
+#328 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#329 = VERTEX_POINT ( 'NONE', #263 ) ;
+#330 = ADVANCED_FACE ( 'NONE', ( #612 ), #508, .F. ) ;
+#331 = EDGE_LOOP ( 'NONE', ( #147, #20, #676, #847, #121, #703, #378, #848, #573, #837, #13, #74, #583, #795, #593, #178, #105, #507, #434, #95, #819 ) ) ;
+#332 = CARTESIAN_POINT ( 'NONE',  ( 85.34907632893697400, 29.42218549057425400, -0.9000000000000257800 ) ) ;
+#333 = VECTOR ( 'NONE', #325, 1000.000000000000000 ) ;
+#334 = ORIENTED_EDGE ( 'NONE', *, *, #197, .T. ) ;
+#335 = EDGE_CURVE ( 'NONE', #12, #773, #638, .T. ) ;
+#336 = VECTOR ( 'NONE', #437, 1000.000000000000000 ) ;
+#337 = PRODUCT ( 'Trigger', 'Trigger', '', ( #500 ) ) ;
+#338 = CARTESIAN_POINT ( 'NONE',  ( 90.51041741031690400, 24.63580558265774200, -0.9000000000000257800 ) ) ;
+#339 = CARTESIAN_POINT ( 'NONE',  ( 96.79510256521999200, 11.40910363042590000, 8.849999999999974800 ) ) ;
+#340 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#341 = CARTESIAN_POINT ( 'NONE',  ( 79.03902334485191300, 25.38213768876517000, 8.849999999999974800 ) ) ;
+#342 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#343 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#344 = ORIENTED_EDGE ( 'NONE', *, *, #424, .F. ) ;
+#345 = ORIENTED_EDGE ( 'NONE', *, *, #532, .T. ) ;
+#346 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#347 = VERTEX_POINT ( 'NONE', #277 ) ;
+#348 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#349 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #299 ) ) ;
+#350 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#351 = CARTESIAN_POINT ( 'NONE',  ( 77.72380673909958700, 22.19168790017376800, 8.849999999999974800 ) ) ;
+#352 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#353 = AXIS2_PLACEMENT_3D ( 'NONE', #821, #794, #801 ) ;
+#354 = FACE_OUTER_BOUND ( 'NONE', #125, .T. ) ;
+#355 = CARTESIAN_POINT ( 'NONE',  ( 78.43835481378285100, 23.03358835468484900, -0.9000000000000257800 ) ) ;
+#356 = CARTESIAN_POINT ( 'NONE',  ( 90.51041741031690400, 24.63580558265774200, -0.9000000000000257800 ) ) ;
+#357 = CIRCLE ( 'NONE', #465, 2.000000000000001800 ) ;
+#358 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#359 = EDGE_CURVE ( 'NONE', #228, #752, #456, .T. ) ;
+#360 = CARTESIAN_POINT ( 'NONE',  ( 84.21041741031690700, 24.63580558265774200, 8.849999999999974800 ) ) ;
+#361 = ORIENTED_EDGE ( 'NONE', *, *, #832, .F. ) ;
+#362 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#363 = ORIENTED_EDGE ( 'NONE', *, *, #335, .F. ) ;
+#364 = CARTESIAN_POINT ( 'NONE',  ( 49.16284893431463100, 11.99081726724777800, -0.9000000000000257800 ) ) ;
+#365 = VECTOR ( 'NONE', #759, 1000.000000000000000 ) ;
+#366 = ORIENTED_EDGE ( 'NONE', *, *, #257, .F. ) ;
+#367 = LINE ( 'NONE', #157, #169 ) ;
+#368 = AXIS2_PLACEMENT_3D ( 'NONE', #420, #869, #494 ) ;
+#369 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#370 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#371 = CARTESIAN_POINT ( 'NONE',  ( 85.34907632893697400, 29.42218549057425400, -0.9000000000000257800 ) ) ;
+#372 = CARTESIAN_POINT ( 'NONE',  ( 84.71724893970458900, 29.13212979094485500, 8.849999999999974800 ) ) ;
+#373 = CARTESIAN_POINT ( 'NONE',  ( 78.73417987749998300, 23.38213768876516600, -0.9000000000000257800 ) ) ;
+#374 = CARTESIAN_POINT ( 'NONE',  ( 82.43824865624770800, 19.77230857553095700, -0.9000000000000257800 ) ) ;
+#375 = CIRCLE ( 'NONE', #248, 1.000000000000000900 ) ;
+#376 = AXIS2_PLACEMENT_3D ( 'NONE', #33, #309, #781 ) ;
+#377 = ORIENTED_EDGE ( 'NONE', *, *, #114, .T. ) ;
+#378 = ORIENTED_EDGE ( 'NONE', *, *, #114, .F. ) ;
+#379 = VERTEX_POINT ( 'NONE', #225 ) ;
+#380 = EDGE_CURVE ( 'NONE', #12, #107, #50, .T. ) ;
+#381 = VECTOR ( 'NONE', #317, 1000.000000000000000 ) ;
+#382 = AXIS2_PLACEMENT_3D ( 'NONE', #146, #639, #220 ) ;
+#383 = ORIENTED_EDGE ( 'NONE', *, *, #594, .T. ) ;
+#384 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#385 = AXIS2_PLACEMENT_3D ( 'NONE', #32, #712, #28 ) ;
+#386 = VERTEX_POINT ( 'NONE', #702 ) ;
+#387 = FACE_BOUND ( 'NONE', #843, .T. ) ;
+#388 = LINE ( 'NONE', #374, #718 ) ;
+#389 = CIRCLE ( 'NONE', #327, 1.000000000000000900 ) ;
+#390 = EDGE_CURVE ( 'NONE', #308, #483, #240, .T. ) ;
+#391 = ADVANCED_FACE ( 'NONE', ( #799 ), #733, .T. ) ;
+#392 = VERTEX_POINT ( 'NONE', #862 ) ;
+#393 = VERTEX_POINT ( 'NONE', #863 ) ;
+#394 = SURFACE_STYLE_FILL_AREA ( #817 ) ;
+#395 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #299 ), #449 ) ;
+#396 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#397 = AXIS2_PLACEMENT_3D ( 'NONE', #750, #746, #811 ) ;
+#398 = CARTESIAN_POINT ( 'NONE',  ( 82.84886591372522000, -3.114644425888227100, -0.9000000000000257800 ) ) ;
+#399 = FACE_OUTER_BOUND ( 'NONE', #481, .T. ) ;
+#400 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#401 = CARTESIAN_POINT ( 'NONE',  ( 78.48622281055054400, 21.54460078548725500, 8.849999999999974800 ) ) ;
+#402 = ORIENTED_EDGE ( 'NONE', *, *, #640, .T. ) ;
+#403 = CARTESIAN_POINT ( 'NONE',  ( 85.71041741031690700, 24.63580558265774200, 8.849999999999974800 ) ) ;
+#404 = ORIENTED_EDGE ( 'NONE', *, *, #772, .T. ) ;
+#405 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#406 = EDGE_CURVE ( 'NONE', #752, #530, #436, .T. ) ;
+#407 = VECTOR ( 'NONE', #596, 1000.000000000000000 ) ;
+#408 = VECTOR ( 'NONE', #441, 1000.000000000000000 ) ;
+#409 = VECTOR ( 'NONE', #738, 1000.000000000000000 ) ;
+#410 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#411 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#412 = CARTESIAN_POINT ( 'NONE',  ( 72.39304044424901000, 13.24925892753435100, -0.9000000000000257800 ) ) ;
+#413 = AXIS2_PLACEMENT_3D ( 'NONE', #542, #410, #856 ) ;
+#414 = FACE_OUTER_BOUND ( 'NONE', #606, .T. ) ;
+#415 = ORIENTED_EDGE ( 'NONE', *, *, #52, .T. ) ;
+#416 = ORIENTED_EDGE ( 'NONE', *, *, #94, .F. ) ;
+#417 = CARTESIAN_POINT ( 'NONE',  ( 82.96567107086720200, 27.38055192210748600, 8.849999999999974800 ) ) ;
+#418 = AXIS2_PLACEMENT_3D ( 'NONE', #657, #242, #174 ) ;
+#419 = CIRCLE ( 'NONE', #368, 1.000000000000000900 ) ;
+#420 = CARTESIAN_POINT ( 'NONE',  ( 78.48622281055054400, 21.54460078548725500, 8.849999999999974800 ) ) ;
+#421 = CARTESIAN_POINT ( 'NONE',  ( 72.39304044424901000, 13.24925892753435100, -0.9000000000000257800 ) ) ;
+#422 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#423 = SURFACE_SIDE_STYLE ('',( #394 ) ) ;
+#424 = EDGE_CURVE ( 'NONE', #319, #764, #221, .T. ) ;
+#425 = ADVANCED_FACE ( 'NONE', ( #595 ), #805, .T. ) ;
+#426 = LINE ( 'NONE', #247, #381 ) ;
+#427 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#428 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#429 = ORIENTED_EDGE ( 'NONE', *, *, #18, .F. ) ;
+#430 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#431 = ORIENTED_EDGE ( 'NONE', *, *, #303, .F. ) ;
+#432 = LINE ( 'NONE', #8, #47 ) ;
+#433 = AXIS2_PLACEMENT_3D ( 'NONE', #4, #503, #73 ) ;
+#434 = ORIENTED_EDGE ( 'NONE', *, *, #546, .T. ) ;
+#435 = CARTESIAN_POINT ( 'NONE',  ( 79.14685503843983800, 23.38504672292061000, -0.9000000000000257800 ) ) ;
+#436 = LINE ( 'NONE', #855, #30 ) ;
+#437 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#438 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#439 = AXIS2_PLACEMENT_3D ( 'NONE', #652, #321, #793 ) ;
+#440 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#441 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#442 = CIRCLE ( 'NONE', #376, 1.500000000000001300 ) ;
+#443 = EDGE_CURVE ( 'NONE', #107, #582, #577, .T. ) ;
+#444 = ORIENTED_EDGE ( 'NONE', *, *, #864, .F. ) ;
+#445 = ORIENTED_EDGE ( 'NONE', *, *, #739, .T. ) ;
+#446 = CYLINDRICAL_SURFACE ( 'NONE', #307, 34.17314491871228900 ) ;
+#447 = EDGE_CURVE ( 'NONE', #453, #764, #16, .T. ) ;
+#448 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #278, 'distance_accuracy_value', 'NONE');
+#449 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #448 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #278, #749, #352 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#450 = AXIS2_PLACEMENT_3D ( 'NONE', #707, #742, #685 ) ;
+#451 = ORIENTED_EDGE ( 'NONE', *, *, #803, .T. ) ;
+#452 = VERTEX_POINT ( 'NONE', #768 ) ;
+#453 = VERTEX_POINT ( 'NONE', #97 ) ;
+#454 = VECTOR ( 'NONE', #705, 1000.000000000000000 ) ;
+#455 = ORIENTED_EDGE ( 'NONE', *, *, #257, .T. ) ;
+#456 = CIRCLE ( 'NONE', #44, 1.000000000000000900 ) ;
+#457 = EDGE_CURVE ( 'NONE', #453, #582, #389, .T. ) ;
+#458 = EDGE_CURVE ( 'NONE', #773, #301, #367, .T. ) ;
+#459 = AXIS2_PLACEMENT_3D ( 'NONE', #517, #358, #348 ) ;
+#460 = ORIENTED_EDGE ( 'NONE', *, *, #380, .T. ) ;
+#461 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#462 = ORIENTED_EDGE ( 'NONE', *, *, #580, .T. ) ;
+#463 = ORIENTED_EDGE ( 'NONE', *, *, #695, .T. ) ;
+#464 = VECTOR ( 'NONE', #734, 1000.000000000000000 ) ;
+#465 = AXIS2_PLACEMENT_3D ( 'NONE', #243, #777, #236 ) ;
+#466 = CARTESIAN_POINT ( 'NONE',  ( 72.39304044424901000, 13.24925892753435100, 8.849999999999974800 ) ) ;
+#467 = CARTESIAN_POINT ( 'NONE',  ( 49.16284893431463100, 11.99081726724777800, -0.9000000000000257800 ) ) ;
+#468 = EDGE_CURVE ( 'NONE', #631, #835, #551, .T. ) ;
+#469 = ORIENTED_EDGE ( 'NONE', *, *, #390, .F. ) ;
+#470 = ADVANCED_FACE ( 'NONE', ( #192 ), #152, .T. ) ;
+#471 = FACE_OUTER_BOUND ( 'NONE', #687, .T. ) ;
+#472 = CARTESIAN_POINT ( 'NONE',  ( 81.02419013851442700, 25.13900644573031300, -0.9000000000000257800 ) ) ;
+#473 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#474 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#475 = AXIS2_PLACEMENT_3D ( 'NONE', #270, #743, #342 ) ;
+#476 = CARTESIAN_POINT ( 'NONE',  ( 81.05118486367386800, 25.46606571491416200, 9.099999999999974800 ) ) ;
+#477 = ADVANCED_FACE ( 'NONE', ( #860 ), #680, .F. ) ;
+#478 = AXIS2_PLACEMENT_3D ( 'NONE', #183, #672, #253 ) ;
+#479 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#480 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#481 = EDGE_LOOP ( 'NONE', ( #122, #677, #549, #807 ) ) ;
+#482 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#483 = VERTEX_POINT ( 'NONE', #10 ) ;
+#484 = CARTESIAN_POINT ( 'NONE',  ( 92.51041741031690400, 18.59667906443786500, 8.849999999999974800 ) ) ;
+#485 = EDGE_CURVE ( 'NONE', #744, #379, #844, .T. ) ;
+#486 = FACE_OUTER_BOUND ( 'NONE', #713, .T. ) ;
+#487 = ORIENTED_EDGE ( 'NONE', *, *, #834, .F. ) ;
+#488 = CIRCLE ( 'NONE', #644, 1.000000000000000900 ) ;
+#489 = CARTESIAN_POINT ( 'NONE',  ( 90.51041741031690400, 24.63580558265774200, 8.849999999999974800 ) ) ;
+#490 = EDGE_CURVE ( 'NONE', #279, #12, #531, .T. ) ;
+#491 = DIRECTION ( 'NONE',  ( -0.7071067811865503500, -0.7071067811865445800, 0.0000000000000000000 ) ) ;
+#492 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#493 = VECTOR ( 'NONE', #698, 1000.000000000000000 ) ;
+#494 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#495 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 3.469446951953611000E-015, 0.0000000000000000000 ) ) ;
+#496 = ORIENTED_EDGE ( 'NONE', *, *, #546, .F. ) ;
+#497 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#498 = ORIENTED_EDGE ( 'NONE', *, *, #458, .T. ) ;
+#499 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#500 = PRODUCT_CONTEXT ( 'NONE', #138, 'mechanical' ) ;
+#501 = AXIS2_PLACEMENT_3D ( 'NONE', #574, #641, #615 ) ;
+#502 = CIRCLE ( 'NONE', #433, 34.17314491871228900 ) ;
+#503 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#504 = CARTESIAN_POINT ( 'NONE',  ( 81.46451914434341300, 19.54460078548725500, -0.9000000000000257800 ) ) ;
+#505 = EDGE_CURVE ( 'NONE', #622, #329, #706, .T. ) ;
+#506 = CARTESIAN_POINT ( 'NONE',  ( 76.32587077133922500, 20.54460078548725500, -0.9000000000000257800 ) ) ;
+#507 = ORIENTED_EDGE ( 'NONE', *, *, #758, .T. ) ;
+#508 = PLANE ( 'NONE',  #7 ) ;
+#509 = ORIENTED_EDGE ( 'NONE', *, *, #851, .F. ) ;
+#510 = FACE_OUTER_BOUND ( 'NONE', #588, .T. ) ;
+#511 = COLOUR_RGB ( '',0.6941176470588235100, 0.09411764705882352800, 0.09411764705882352800 ) ;
+#512 = AXIS2_PLACEMENT_3D ( 'NONE', #740, #340, #813 ) ;
+#513 = VERTEX_POINT ( 'NONE', #59 ) ;
+#514 = CARTESIAN_POINT ( 'NONE',  ( 81.30966675415913900, 25.72454760539943700, 9.099999999999974800 ) ) ;
+#515 = VECTOR ( 'NONE', #480, 1000.000000000000000 ) ;
+#516 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#517 = CARTESIAN_POINT ( 'NONE',  ( 85.71041741031690700, 24.63580558265774200, -0.9000000000000257800 ) ) ;
+#518 = AXIS2_PLACEMENT_3D ( 'NONE', #305, #112, #605 ) ;
+#519 = CIRCLE ( 'NONE', #160, 1.000000000000000900 ) ;
+#520 = VERTEX_POINT ( 'NONE', #287 ) ;
+#521 = ORIENTED_EDGE ( 'NONE', *, *, #335, .T. ) ;
+#522 = VERTEX_POINT ( 'NONE', #398 ) ;
+#523 = VERTEX_POINT ( 'NONE', #686 ) ;
+#524 = EDGE_CURVE ( 'NONE', #835, #631, #663, .T. ) ;
+#525 = FACE_OUTER_BOUND ( 'NONE', #727, .T. ) ;
+#526 = AXIS2_PLACEMENT_3D ( 'NONE', #290, #760, #82 ) ;
+#527 = AXIS2_PLACEMENT_3D ( 'NONE', #297, #209, #370 ) ;
+#528 = ORIENTED_EDGE ( 'NONE', *, *, #359, .F. ) ;
+#529 = ORIENTED_EDGE ( 'NONE', *, *, #108, .F. ) ;
+#530 = VERTEX_POINT ( 'NONE', #850 ) ;
+#531 = LINE ( 'NONE', #118, #336 ) ;
+#532 = EDGE_CURVE ( 'NONE', #347, #265, #831, .T. ) ;
+#533 = CYLINDRICAL_SURFACE ( 'NONE', #353, 1.000000000000000900 ) ;
+#534 = FACE_OUTER_BOUND ( 'NONE', #790, .T. ) ;
+#535 = EDGE_CURVE ( 'NONE', #520, #651, #488, .T. ) ;
+#536 = CARTESIAN_POINT ( 'NONE',  ( 96.79510256521999200, 11.40910363042590000, -0.9000000000000257800 ) ) ;
+#537 = ORIENTED_EDGE ( 'NONE', *, *, #406, .F. ) ;
+#538 = ORIENTED_EDGE ( 'NONE', *, *, #149, .F. ) ;
+#539 = EDGE_LOOP ( 'NONE', ( #711, #191, #643, #21 ) ) ;
+#540 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#541 = CYLINDRICAL_SURFACE ( 'NONE', #397, 1.000000000000000900 ) ;
+#542 = CARTESIAN_POINT ( 'NONE',  ( 85.71041741031693600, 24.63580558265774200, 8.849999999999974800 ) ) ;
+#543 = CIRCLE ( 'NONE', #314, 19.41910449038013200 ) ;
+#544 = CARTESIAN_POINT ( 'NONE',  ( 49.16284893431463100, 11.99081726724777800, -0.9000000000000257800 ) ) ;
+#545 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#546 = EDGE_CURVE ( 'NONE', #244, #301, #126, .T. ) ;
+#547 = ORIENTED_EDGE ( 'NONE', *, *, #695, .F. ) ;
+#548 = ORIENTED_EDGE ( 'NONE', *, *, #15, .T. ) ;
+#549 = ORIENTED_EDGE ( 'NONE', *, *, #739, .F. ) ;
+#550 = ADVANCED_FACE ( 'NONE', ( #106, #312 ), #674, .F. ) ;
+#551 = CIRCLE ( 'NONE', #385, 1.500000000000001300 ) ;
+#552 = CARTESIAN_POINT ( 'NONE',  ( 81.02419013851442700, 25.13900644573031300, -0.9000000000000257800 ) ) ;
+#553 = DIRECTION ( 'NONE',  ( 0.7071067811865503500, 0.7071067811865445800, 0.0000000000000000000 ) ) ;
+#554 = CARTESIAN_POINT ( 'NONE',  ( 81.46451914434341300, 20.54460078548725500, -0.9000000000000257800 ) ) ;
+#555 = PLANE ( 'NONE',  #208 ) ;
+#556 = CYLINDRICAL_SURFACE ( 'NONE', #501, 2.000000000000001800 ) ;
+#557 = CARTESIAN_POINT ( 'NONE',  ( 82.43824865624770800, 19.77230857553095700, 8.849999999999974800 ) ) ;
+#558 = VERTEX_POINT ( 'NONE', #800 ) ;
+#559 = FILL_AREA_STYLE_COLOUR ( '', #511 ) ;
+#560 = AXIS2_PLACEMENT_3D ( 'NONE', #304, #68, #797 ) ;
+#561 = ORIENTED_EDGE ( 'NONE', *, *, #195, .F. ) ;
+#562 = ADVANCED_FACE ( 'NONE', ( #812 ), #91, .F. ) ;
+#563 = DIRECTION ( 'NONE',  ( 0.7071067811865446900, -0.7071067811865504600, 0.0000000000000000000 ) ) ;
+#564 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#565 = CARTESIAN_POINT ( 'NONE',  ( 78.43835481378285100, 23.03358835468484900, -0.9000000000000257800 ) ) ;
+#566 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #71 ) ;
+#567 = VERTEX_POINT ( 'NONE', #193 ) ;
+#568 = VECTOR ( 'NONE', #346, 1000.000000000000000 ) ;
+#569 = CARTESIAN_POINT ( 'NONE',  ( 81.46451914434341300, 19.54460078548725500, -0.9000000000000257800 ) ) ;
+#570 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#571 = ORIENTED_EDGE ( 'NONE', *, *, #34, .F. ) ;
+#572 = AXIS2_PLACEMENT_3D ( 'NONE', #288, #700, #362 ) ;
+#573 = ORIENTED_EDGE ( 'NONE', *, *, #662, .T. ) ;
+#574 = CARTESIAN_POINT ( 'NONE',  ( 92.51041741031690400, 18.59667906443786500, -0.9000000000000257800 ) ) ;
+#575 = LINE ( 'NONE', #351, #333 ) ;
+#576 = LINE ( 'NONE', #417, #190 ) ;
+#577 = CIRCLE ( 'NONE', #237, 4.799999999999970500 ) ;
+#578 = CARTESIAN_POINT ( 'NONE',  ( 92.24354219757447000, 16.61456463261923500, -0.9000000000000257800 ) ) ;
+#579 = CARTESIAN_POINT ( 'NONE',  ( 76.32587077133922500, 20.54460078548725500, 8.849999999999974800 ) ) ;
+#580 = EDGE_CURVE ( 'NONE', #522, #704, #267, .T. ) ;
+#581 = CARTESIAN_POINT ( 'NONE',  ( 87.21041741031690700, 24.63580558265774200, -0.9000000000000257800 ) ) ;
+#582 = VERTEX_POINT ( 'NONE', #332 ) ;
+#583 = ORIENTED_EDGE ( 'NONE', *, *, #129, .T. ) ;
+#584 = ADVANCED_FACE ( 'NONE', ( #295 ), #446, .F. ) ;
+#585 = CYLINDRICAL_SURFACE ( 'NONE', #81, 1.000000000000000900 ) ;
+#586 = VECTOR ( 'NONE', #692, 1000.000000000000000 ) ;
+#587 = AXIS2_PLACEMENT_3D ( 'NONE', #179, #153, #120 ) ;
+#588 = EDGE_LOOP ( 'NONE', ( #60, #233, #366, #163 ) ) ;
+#589 = CLOSED_SHELL ( 'NONE', ( #170, #391, #562, #584, #609, #769, #156, #728, #323, #315, #101, #550, #477, #206, #782, #330, #470, #425, #260, #188, #104, #721, #649, #664, #171 ) ) ;
+#590 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#591 = FACE_OUTER_BOUND ( 'NONE', #9, .T. ) ;
+#592 = CIRCLE ( 'NONE', #655, 1.000000000000000900 ) ;
+#593 = ORIENTED_EDGE ( 'NONE', *, *, #675, .T. ) ;
+#594 = EDGE_CURVE ( 'NONE', #567, #319, #624, .T. ) ;
+#595 = FACE_OUTER_BOUND ( 'NONE', #177, .T. ) ;
+#596 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#597 = AXIS2_PLACEMENT_3D ( 'NONE', #729, #328, #802 ) ;
+#598 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#599 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trigger', ( #684, #158 ), #184 ) ;
+#600 = ORIENTED_EDGE ( 'NONE', *, *, #485, .T. ) ;
+#601 = ORIENTED_EDGE ( 'NONE', *, *, #149, .T. ) ;
+#602 = CYLINDRICAL_SURFACE ( 'NONE', #119, 5.252432370836668700 ) ;
+#603 = AXIS2_PLACEMENT_3D ( 'NONE', #45, #654, #722 ) ;
+#604 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#605 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#606 = EDGE_LOOP ( 'NONE', ( #363, #88, #529, #647 ) ) ;
+#607 = ORIENTED_EDGE ( 'NONE', *, *, #532, .F. ) ;
+#608 = CARTESIAN_POINT ( 'NONE',  ( 92.51041741031690400, 18.59667906443786500, -0.9000000000000257800 ) ) ;
+#609 = ADVANCED_FACE ( 'NONE', ( #246 ), #602, .T. ) ;
+#610 = VECTOR ( 'NONE', #369, 1000.000000000000000 ) ;
+#611 = ORIENTED_EDGE ( 'NONE', *, *, #594, .F. ) ;
+#612 = FACE_OUTER_BOUND ( 'NONE', #27, .T. ) ;
+#613 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#614 = AXIS2_PLACEMENT_3D ( 'NONE', #709, #298, #766 ) ;
+#615 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#616 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#617 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#618 = EDGE_CURVE ( 'NONE', #107, #622, #767, .T. ) ;
+#619 = EDGE_LOOP ( 'NONE', ( #235, #334, #571, #547 ) ) ;
+#620 = ORIENTED_EDGE ( 'NONE', *, *, #276, .T. ) ;
+#621 = SHAPE_DEFINITION_REPRESENTATION ( #182, #599 ) ;
+#622 = VERTEX_POINT ( 'NONE', #489 ) ;
+#623 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#624 = LINE ( 'NONE', #552, #464 ) ;
+#625 = VERTEX_POINT ( 'NONE', #554 ) ;
+#626 = CARTESIAN_POINT ( 'NONE',  ( 85.42435572089112800, 28.42502300975830600, 8.849999999999974800 ) ) ;
+#627 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#628 = CARTESIAN_POINT ( 'NONE',  ( 82.84886591372522000, -3.114644425888230600, -0.9000000000000257800 ) ) ;
+#629 = FILL_AREA_STYLE ('',( #559 ) ) ;
+#630 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#631 = VERTEX_POINT ( 'NONE', #127 ) ;
+#632 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#633 = AXIS2_PLACEMENT_3D ( 'NONE', #284, #259, #256 ) ;
+#634 = ORIENTED_EDGE ( 'NONE', *, *, #229, .F. ) ;
+#635 = LINE ( 'NONE', #224, #454 ) ;
+#636 = ORIENTED_EDGE ( 'NONE', *, *, #162, .F. ) ;
+#637 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#638 = CIRCLE ( 'NONE', #796, 2.000000000000001800 ) ;
+#639 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#640 = EDGE_CURVE ( 'NONE', #265, #347, #231, .T. ) ;
+#641 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#642 = CARTESIAN_POINT ( 'NONE',  ( 80.54122114246483500, -1.850638918204116700, -0.9000000000000257800 ) ) ;
+#643 = ORIENTED_EDGE ( 'NONE', *, *, #505, .F. ) ;
+#644 = AXIS2_PLACEMENT_3D ( 'NONE', #115, #613, #189 ) ;
+#645 = CARTESIAN_POINT ( 'NONE',  ( 96.79510256521999200, 11.40910363042590000, -0.9000000000000257800 ) ) ;
+#646 = CARTESIAN_POINT ( 'NONE',  ( 84.71724893970458900, 29.13212979094485500, -0.9000000000000257800 ) ) ;
+#647 = ORIENTED_EDGE ( 'NONE', *, *, #458, .F. ) ;
+#648 = PRESENTATION_STYLE_ASSIGNMENT (( #2 ) ) ;
+#649 = ADVANCED_FACE ( 'NONE', ( #61 ), #585, .T. ) ;
+#650 = EDGE_CURVE ( 'NONE', #329, #830, #745, .T. ) ;
+#651 = VERTEX_POINT ( 'NONE', #557 ) ;
+#652 = CARTESIAN_POINT ( 'NONE',  ( 85.71041741031693600, 24.63580558265774200, 8.849999999999974800 ) ) ;
+#653 = FACE_OUTER_BOUND ( 'NONE', #539, .T. ) ;
+#654 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#655 = AXIS2_PLACEMENT_3D ( 'NONE', #19, #516, #89 ) ;
+#656 = VERTEX_POINT ( 'NONE', #62 ) ;
+#657 = CARTESIAN_POINT ( 'NONE',  ( 91.78836392586207200, 4.160834189802735700, -0.9000000000000257800 ) ) ;
+#658 = ORIENTED_EDGE ( 'NONE', *, *, #708, .F. ) ;
+#659 = CIRCLE ( 'NONE', #587, 1.000000000000000900 ) ;
+#660 = CIRCLE ( 'NONE', #846, 2.000000000000001800 ) ;
+#661 = ORIENTED_EDGE ( 'NONE', *, *, #443, .F. ) ;
+#662 = EDGE_CURVE ( 'NONE', #392, #744, #419, .T. ) ;
+#663 = CIRCLE ( 'NONE', #478, 1.500000000000001300 ) ;
+#664 = ADVANCED_FACE ( 'NONE', ( #37 ), #725, .T. ) ;
+#665 = LINE ( 'NONE', #646, #833 ) ;
+#666 = ORIENTED_EDGE ( 'NONE', *, *, #56, .T. ) ;
+#667 = CARTESIAN_POINT ( 'NONE',  ( 90.51041741031690400, 18.59667906443786500, -0.9000000000000257800 ) ) ;
+#668 = ORIENTED_EDGE ( 'NONE', *, *, #291, .T. ) ;
+#669 = VECTOR ( 'NONE', #630, 1000.000000000000000 ) ;
+#670 = CARTESIAN_POINT ( 'NONE',  ( 90.51041741031690400, 16.55910363042589900, -0.9000000000000257800 ) ) ;
+#671 = AXIS2_PLACEMENT_3D ( 'NONE', #341, #430, #396 ) ;
+#672 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#673 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#674 = PLANE ( 'NONE',  #413 ) ;
+#675 = EDGE_CURVE ( 'NONE', #159, #513, #203, .T. ) ;
+#676 = ORIENTED_EDGE ( 'NONE', *, *, #851, .T. ) ;
+#677 = ORIENTED_EDGE ( 'NONE', *, *, #785, .T. ) ;
+#678 = CARTESIAN_POINT ( 'NONE',  ( 87.21041741031690700, 24.63580558265774200, -0.9000000000000257800 ) ) ;
+#679 = EDGE_LOOP ( 'NONE', ( #756, #57, #48, #548 ) ) ;
+#680 = CYLINDRICAL_SURFACE ( 'NONE', #459, 1.500000000000001300 ) ;
+#681 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#682 = AXIS2_PLACEMENT_3D ( 'NONE', #403, #854, #474 ) ;
+#683 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#684 = MANIFOLD_SOLID_BREP ( 'Fillet9', #589 ) ;
+#685 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#686 = CARTESIAN_POINT ( 'NONE',  ( 91.72060907647754400, 6.159686180417573100, -0.9000000000000257800 ) ) ;
+#687 = EDGE_LOOP ( 'NONE', ( #710, #36, #361, #853 ) ) ;
+#688 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 6.938893903907222100E-015, 0.0000000000000000000 ) ) ;
+#689 = LINE ( 'NONE', #506, #226 ) ;
+#690 = ORIENTED_EDGE ( 'NONE', *, *, #129, .F. ) ;
+#691 = ORIENTED_EDGE ( 'NONE', *, *, #34, .T. ) ;
+#692 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#693 = SURFACE_STYLE_USAGE ( .BOTH. , #207 ) ;
+#694 = CARTESIAN_POINT ( 'NONE',  ( 89.97733363836110200, 5.009462081021390600, -0.9000000000000257800 ) ) ;
+#695 = EDGE_CURVE ( 'NONE', #513, #522, #838, .T. ) ;
+#696 = CARTESIAN_POINT ( 'NONE',  ( 78.48622281055054400, 20.54460078548725500, 8.849999999999974800 ) ) ;
+#697 = VERTEX_POINT ( 'NONE', #204 ) ;
+#698 = DIRECTION ( 'NONE',  ( 0.6470871146865109200, 0.7624160714509409200, -0.0000000000000000000 ) ) ;
+#699 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #22 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #497, #70, #564 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#700 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#701 = ORIENTED_EDGE ( 'NONE', *, *, #276, .F. ) ;
+#702 = CARTESIAN_POINT ( 'NONE',  ( 80.65873696775570100, -1.268627314643838300, -0.9000000000000257800 ) ) ;
+#703 = ORIENTED_EDGE ( 'NONE', *, *, #162, .T. ) ;
+#704 = VERTEX_POINT ( 'NONE', #694 ) ;
+#705 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#706 = CIRCLE ( 'NONE', #439, 4.799999999999970500 ) ;
+#707 = CARTESIAN_POINT ( 'NONE',  ( 79.03902334485191300, 25.38213768876517000, -0.9000000000000257800 ) ) ;
+#708 = EDGE_CURVE ( 'NONE', #651, #483, #502, .T. ) ;
+#709 = CARTESIAN_POINT ( 'NONE',  ( 91.78836392586207200, 4.160834189802735700, 8.849999999999974800 ) ) ;
+#710 = ORIENTED_EDGE ( 'NONE', *, *, #52, .F. ) ;
+#711 = ORIENTED_EDGE ( 'NONE', *, *, #443, .T. ) ;
+#712 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#713 = EDGE_LOOP ( 'NONE', ( #469, #165, #264, #690 ) ) ;
+#714 = PLANE ( 'NONE',  #816 ) ;
+#715 = VERTEX_POINT ( 'NONE', #210 ) ;
+#716 = EDGE_LOOP ( 'NONE', ( #859, #765, #658, #111 ) ) ;
+#717 = EDGE_CURVE ( 'NONE', #87, #228, #113, .T. ) ;
+#718 = VECTOR ( 'NONE', #227, 1000.000000000000000 ) ;
+#719 = ORIENTED_EDGE ( 'NONE', *, *, #98, .F. ) ;
+#720 = VECTOR ( 'NONE', #17, 1000.000000000000100 ) ;
+#721 = ADVANCED_FACE ( 'NONE', ( #320 ), #281, .F. ) ;
+#722 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#723 = ORIENTED_EDGE ( 'NONE', *, *, #524, .F. ) ;
+#724 = ORIENTED_EDGE ( 'NONE', *, *, #834, .T. ) ;
+#725 = CYLINDRICAL_SURFACE ( 'NONE', #824, 1.000000000000000900 ) ;
+#726 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#727 = EDGE_LOOP ( 'NONE', ( #255, #200, #431, #383 ) ) ;
+#728 = ADVANCED_FACE ( 'NONE', ( #302 ), #798, .T. ) ;
+#729 = CARTESIAN_POINT ( 'NONE',  ( 91.54267019438331900, 11.40910363042590000, 8.849999999999974800 ) ) ;
+#730 = CIRCLE ( 'NONE', #142, 1.500000000000001300 ) ;
+#731 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #31 ), #699 ) ;
+#732 = CARTESIAN_POINT ( 'NONE',  ( 77.48622281055054400, 21.54460078548725500, -0.9000000000000257800 ) ) ;
+#733 = CYLINDRICAL_SURFACE ( 'NONE', #186, 1.500000000000001300 ) ;
+#734 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#735 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#736 = CARTESIAN_POINT ( 'NONE',  ( 91.54267019438331900, 11.40910363042590000, -0.9000000000000257800 ) ) ;
+#737 = ORIENTED_EDGE ( 'NONE', *, *, #457, .F. ) ;
+#738 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#739 = EDGE_CURVE ( 'NONE', #379, #176, #96, .T. ) ;
+#740 = CARTESIAN_POINT ( 'NONE',  ( 85.71041741031690700, 24.63580558265774200, 8.849999999999974800 ) ) ;
+#741 = ORIENTED_EDGE ( 'NONE', *, *, #136, .T. ) ;
+#742 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#743 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#744 = VERTEX_POINT ( 'NONE', #696 ) ;
+#745 = CIRCLE ( 'NONE', #167, 1.000000000000000900 ) ;
+#746 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#747 = LINE ( 'NONE', #211, #109 ) ;
+#748 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#749 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#750 = CARTESIAN_POINT ( 'NONE',  ( 82.01677353534569200, 25.01744082421288300, -0.9000000000000257800 ) ) ;
+#751 = AXIS2_PLACEMENT_3D ( 'NONE', #467, #280, #11 ) ;
+#752 = VERTEX_POINT ( 'NONE', #435 ) ;
+#753 = CARTESIAN_POINT ( 'NONE',  ( 91.54267019438331900, 11.40910363042590000, -0.9000000000000257800 ) ) ;
+#754 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -3.122502256758250200E-014, 0.0000000000000000000 ) ) ;
+#755 = LINE ( 'NONE', #41, #407 ) ;
+#756 = ORIENTED_EDGE ( 'NONE', *, *, #94, .T. ) ;
+#757 = VECTOR ( 'NONE', #58, 1000.000000000000000 ) ;
+#758 = EDGE_CURVE ( 'NONE', #784, #244, #140, .T. ) ;
+#759 = DIRECTION ( 'NONE',  ( 0.6470871146865109200, 0.7624160714509409200, -0.0000000000000000000 ) ) ;
+#760 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#761 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#762 = CIRCLE ( 'NONE', #66, 34.17314491871228900 ) ;
+#763 = CARTESIAN_POINT ( 'NONE',  ( 79.20077088523379400, 22.38650123999833100, 8.849999999999974800 ) ) ;
+#764 = VERTEX_POINT ( 'NONE', #79 ) ;
+#765 = ORIENTED_EDGE ( 'NONE', *, *, #390, .T. ) ;
+#766 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#767 = LINE ( 'NONE', #338, #787 ) ;
+#768 = CARTESIAN_POINT ( 'NONE',  ( 81.30966675415913900, 25.72454760539943700, 8.849999999999974800 ) ) ;
+#769 = ADVANCED_FACE ( 'NONE', ( #653 ), #76, .T. ) ;
+#770 = AXIS2_PLACEMENT_3D ( 'NONE', #818, #632, #617 ) ;
+#771 = CIRCLE ( 'NONE', #770, 34.17314491871228900 ) ;
+#772 = EDGE_CURVE ( 'NONE', #631, #265, #635, .T. ) ;
+#773 = VERTEX_POINT ( 'NONE', #578 ) ;
+#774 = EDGE_LOOP ( 'NONE', ( #429, #463, #462, #668 ) ) ;
+#775 = LINE ( 'NONE', #514, #408 ) ;
+#776 = ORIENTED_EDGE ( 'NONE', *, *, #172, .F. ) ;
+#777 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#778 = CYLINDRICAL_SURFACE ( 'NONE', #839, 19.41910449038013200 ) ;
+#779 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#780 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #31 ) ) ;
+#781 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#782 = ADVANCED_FACE ( 'NONE', ( #471 ), #238, .F. ) ;
+#783 = EDGE_LOOP ( 'NONE', ( #827, #404, #402, #538 ) ) ;
+#784 = VERTEX_POINT ( 'NONE', #826 ) ;
+#785 = EDGE_CURVE ( 'NONE', #392, #176, #432, .T. ) ;
+#786 = EDGE_LOOP ( 'NONE', ( #239, #724, #498, #496 ) ) ;
+#787 = VECTOR ( 'NONE', #616, 1000.000000000000000 ) ;
+#788 = CARTESIAN_POINT ( 'NONE',  ( 85.71041741031693600, 24.63580558265774200, -0.9000000000000257800 ) ) ;
+#789 = EDGE_CURVE ( 'NONE', #520, #744, #254, .T. ) ;
+#790 = EDGE_LOOP ( 'NONE', ( #719, #166, #460, #137 ) ) ;
+#791 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#792 = ORIENTED_EDGE ( 'NONE', *, *, #232, .T. ) ;
+#793 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#794 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#795 = ORIENTED_EDGE ( 'NONE', *, *, #90, .T. ) ;
+#796 = AXIS2_PLACEMENT_3D ( 'NONE', #608, #604, #673 ) ;
+#797 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 4.264528545109646800E-014, 0.0000000000000000000 ) ) ;
+#798 = CYLINDRICAL_SURFACE ( 'NONE', #234, 5.252432370836668700 ) ;
+#799 = FACE_OUTER_BOUND ( 'NONE', #619, .T. ) ;
+#800 = CARTESIAN_POINT ( 'NONE',  ( 89.97733363836110200, 5.009462081021390600, 8.849999999999974800 ) ) ;
+#801 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#802 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#803 = EDGE_CURVE ( 'NONE', #764, #452, #775, .T. ) ;
+#804 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#805 = PLANE ( 'NONE',  #285 ) ;
+#806 = ORIENTED_EDGE ( 'NONE', *, *, #136, .F. ) ;
+#807 = ORIENTED_EDGE ( 'NONE', *, *, #485, .F. ) ;
+#808 = LINE ( 'NONE', #54, #365 ) ;
+#809 = EDGE_CURVE ( 'NONE', #452, #567, #592, .T. ) ;
+#810 = VERTEX_POINT ( 'NONE', #645 ) ;
+#811 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#812 = FACE_OUTER_BOUND ( 'NONE', #783, .T. ) ;
+#813 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#814 = CARTESIAN_POINT ( 'NONE',  ( 79.20077088523379400, 22.38650123999833100, -0.9000000000000257800 ) ) ;
+#815 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#816 = AXIS2_PLACEMENT_3D ( 'NONE', #788, #384, #852 ) ;
+#817 = FILL_AREA_STYLE ('',( #134 ) ) ;
+#818 = CARTESIAN_POINT ( 'NONE',  ( 49.16284893431463100, 11.99081726724777800, 8.849999999999974800 ) ) ;
+#819 = ORIENTED_EDGE ( 'NONE', *, *, #98, .T. ) ;
+#820 = VECTOR ( 'NONE', #143, 1000.000000000000000 ) ;
+#821 = CARTESIAN_POINT ( 'NONE',  ( 78.48622281055054400, 21.54460078548725500, 8.849999999999974800 ) ) ;
+#822 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#823 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#824 = AXIS2_PLACEMENT_3D ( 'NONE', #814, #343, #866 ) ;
+#825 = CARTESIAN_POINT ( 'NONE',  ( 91.54267019438331900, 11.40910363042590000, 8.849999999999974800 ) ) ;
+#826 = CARTESIAN_POINT ( 'NONE',  ( 91.72060907647754400, 6.159686180417573100, 8.849999999999974800 ) ) ;
+#827 = ORIENTED_EDGE ( 'NONE', *, *, #468, .F. ) ;
+#828 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#829 = CIRCLE ( 'NONE', #603, 5.252432370836668700 ) ;
+#830 = VERTEX_POINT ( 'NONE', #372 ) ;
+#831 = CIRCLE ( 'NONE', #682, 1.500000000000001300 ) ;
+#832 = EDGE_CURVE ( 'NONE', #558, #784, #29, .T. ) ;
+#833 = VECTOR ( 'NONE', #735, 1000.000000000000000 ) ;
+#834 = EDGE_CURVE ( 'NONE', #810, #773, #219, .T. ) ;
+#835 = VERTEX_POINT ( 'NONE', #581 ) ;
+#836 = ORIENTED_EDGE ( 'NONE', *, *, #840, .F. ) ;
+#837 = ORIENTED_EDGE ( 'NONE', *, *, #789, .F. ) ;
+#838 = LINE ( 'NONE', #628, #669 ) ;
+#839 = AXIS2_PLACEMENT_3D ( 'NONE', #421, #545, #249 ) ;
+#840 = EDGE_CURVE ( 'NONE', #715, #386, #730, .T. ) ;
+#841 = ORIENTED_EDGE ( 'NONE', *, *, #214, .T. ) ;
+#842 = CYLINDRICAL_SURFACE ( 'NONE', #25, 1.000000000000000900 ) ;
+#843 = EDGE_LOOP ( 'NONE', ( #306, #198 ) ) ;
+#844 = LINE ( 'NONE', #274, #515 ) ;
+#845 = ORIENTED_EDGE ( 'NONE', *, *, #75, .T. ) ;
+#846 = AXIS2_PLACEMENT_3D ( 'NONE', #484, #438, #427 ) ;
+#847 = ORIENTED_EDGE ( 'NONE', *, *, #809, .T. ) ;
+#848 = ORIENTED_EDGE ( 'NONE', *, *, #271, .T. ) ;
+#849 = CARTESIAN_POINT ( 'NONE',  ( 82.04122114246484900, -1.850638918204116700, -0.9000000000000257800 ) ) ;
+#850 = CARTESIAN_POINT ( 'NONE',  ( 79.14685503843983800, 23.38504672292061000, 8.849999999999974800 ) ) ;
+#851 = EDGE_CURVE ( 'NONE', #830, #452, #576, .T. ) ;
+#852 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#853 = ORIENTED_EDGE ( 'NONE', *, *, #291, .F. ) ;
+#854 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#855 = CARTESIAN_POINT ( 'NONE',  ( 79.14685503843983800, 23.38504672292061000, -0.9000000000000257800 ) ) ;
+#856 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#857 = AXIS2_PLACEMENT_3D ( 'NONE', #275, #748, #350 ) ;
+#858 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#859 = ORIENTED_EDGE ( 'NONE', *, *, #229, .T. ) ;
+#860 = FACE_OUTER_BOUND ( 'NONE', #85, .T. ) ;
+#861 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#862 = CARTESIAN_POINT ( 'NONE',  ( 77.48622281055054400, 21.54460078548725500, 8.849999999999974800 ) ) ;
+#863 = CARTESIAN_POINT ( 'NONE',  ( 80.65873696775570100, -1.268627314643838300, 8.849999999999974800 ) ) ;
+#864 = EDGE_CURVE ( 'NONE', #651, #656, #388, .T. ) ;
+#865 = ORIENTED_EDGE ( 'NONE', *, *, #447, .T. ) ;
+#866 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#867 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#868 = ORIENTED_EDGE ( 'NONE', *, *, #90, .F. ) ;
+#869 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#870 = EDGE_LOOP ( 'NONE', ( #252, #701, #139, #444 ) ) ;
+#871 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+ENDSEC;
+END-ISO-10303-21;

Firearms/Sacramento_Pistol-Caboose/STEP/TriggerGuard^StikM1.STEP

@@ -0,0 +1,219 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('TriggerGuard^StikM1.STEP',
+    '2013-09-01T22:36:46',
+    ( 'Asher' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = CARTESIAN_POINT ( 'NONE',  ( 11.85058935189486800, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#2 = EDGE_LOOP ( 'NONE', ( #48, #173, #163, #161 ) ) ;
+#3 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#4 = SURFACE_STYLE_FILL_AREA ( #56 ) ;
+#5 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#6 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'TriggerGuard^StikM1', ( #19, #115 ), #24 ) ;
+#7 = ORIENTED_EDGE ( 'NONE', *, *, #11, .T. ) ;
+#8 = ORIENTED_EDGE ( 'NONE', *, *, #47, .F. ) ;
+#9 = FILL_AREA_STYLE_COLOUR ( '', #197 ) ;
+#10 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#11 = EDGE_CURVE ( 'NONE', #43, #199, #126, .T. ) ;
+#12 = CARTESIAN_POINT ( 'NONE',  ( 16.85058935189487200, -4.207926669749527400, 42.26530551925746000 ) ) ;
+#13 = CARTESIAN_POINT ( 'NONE',  ( 16.85058935189487200, 5.792073330250476100, 17.26530551925745600 ) ) ;
+#14 = EDGE_LOOP ( 'NONE', ( #29, #181, #37, #153 ) ) ;
+#15 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#16 = CARTESIAN_POINT ( 'NONE',  ( 16.85058935189487200, 5.792073330250472600, 42.26530551925746000 ) ) ;
+#17 = ADVANCED_FACE ( 'NONE', ( #84 ), #105, .F. ) ;
+#18 = AXIS2_PLACEMENT_3D ( 'NONE', #191, #201, #202 ) ;
+#19 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #21 ) ;
+#20 = EDGE_CURVE ( 'NONE', #180, #43, #154, .T. ) ;
+#21 = CLOSED_SHELL ( 'NONE', ( #17, #31, #152, #27, #96, #157 ) ) ;
+#22 = CARTESIAN_POINT ( 'NONE',  ( 11.85058935189486800, -4.207926669749523900, 17.26530551925745600 ) ) ;
+#23 = FILL_AREA_STYLE_COLOUR ( '', #10 ) ;
+#24 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #52 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #35, #36, #38 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#25 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.387778780781445400E-016, -1.000000000000000000 ) ) ;
+#26 = SHAPE_DEFINITION_REPRESENTATION ( #124, #6 ) ;
+#27 = ADVANCED_FACE ( 'NONE', ( #95 ), #62, .F. ) ;
+#28 = EDGE_CURVE ( 'NONE', #88, #148, #92, .T. ) ;
+#29 = ORIENTED_EDGE ( 'NONE', *, *, #195, .T. ) ;
+#30 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#31 = ADVANCED_FACE ( 'NONE', ( #145 ), #119, .F. ) ;
+#32 = AXIS2_PLACEMENT_3D ( 'NONE', #1, #188, #5 ) ;
+#33 = VECTOR ( 'NONE', #25, 1000.000000000000000 ) ;
+#34 = VECTOR ( 'NONE', #15, 1000.000000000000000 ) ;
+#35 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#36 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#37 = ORIENTED_EDGE ( 'NONE', *, *, #102, .T. ) ;
+#38 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#39 = VECTOR ( 'NONE', #3, 1000.000000000000000 ) ;
+#40 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#41 = ORIENTED_EDGE ( 'NONE', *, *, #102, .F. ) ;
+#42 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #54 ) ;
+#43 = VERTEX_POINT ( 'NONE', #140 ) ;
+#44 = PRODUCT_CONTEXT ( 'NONE', #54, 'mechanical' ) ;
+#45 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#46 = LINE ( 'NONE', #16, #34 ) ;
+#47 = EDGE_CURVE ( 'NONE', #186, #88, #85, .T. ) ;
+#48 = ORIENTED_EDGE ( 'NONE', *, *, #59, .F. ) ;
+#49 = LINE ( 'NONE', #22, #33 ) ;
+#50 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #70, 'distance_accuracy_value', 'NONE');
+#51 = LINE ( 'NONE', #60, #39 ) ;
+#52 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #35, 'distance_accuracy_value', 'NONE');
+#53 = VECTOR ( 'NONE', #190, 1000.000000000000000 ) ;
+#54 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#55 = STYLED_ITEM ( 'NONE', ( #129 ), #6 ) ;
+#56 = FILL_AREA_STYLE ('',( #23 ) ) ;
+#57 = FACE_OUTER_BOUND ( 'NONE', #130, .T. ) ;
+#58 = FACE_OUTER_BOUND ( 'NONE', #2, .T. ) ;
+#59 = EDGE_CURVE ( 'NONE', #148, #43, #80, .T. ) ;
+#60 = CARTESIAN_POINT ( 'NONE',  ( 16.85058935189487200, -4.207926669749523900, 17.26530551925745600 ) ) ;
+#61 = SURFACE_SIDE_STYLE ('',( #4 ) ) ;
+#62 = PLANE ( 'NONE',  #144 ) ;
+#63 = VECTOR ( 'NONE', #175, 1000.000000000000000 ) ;
+#64 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.387778780781445400E-016, 1.000000000000000000 ) ) ;
+#65 = LINE ( 'NONE', #165, #63 ) ;
+#66 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #55 ) ) ;
+#67 = LINE ( 'NONE', #176, #53 ) ;
+#68 = LINE ( 'NONE', #170, #72 ) ;
+#69 = VECTOR ( 'NONE', #189, 1000.000000000000000 ) ;
+#70 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#71 = SURFACE_STYLE_USAGE ( .BOTH. , #61 ) ;
+#72 = VECTOR ( 'NONE', #171, 1000.000000000000000 ) ;
+#73 = FACE_OUTER_BOUND ( 'NONE', #14, .T. ) ;
+#74 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 1.387778780781445400E-016 ) ) ;
+#75 = ORIENTED_EDGE ( 'NONE', *, *, #28, .T. ) ;
+#76 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#77 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #55 ), #90 ) ;
+#78 = PLANE ( 'NONE',  #32 ) ;
+#79 = VECTOR ( 'NONE', #143, 1000.000000000000000 ) ;
+#80 = LINE ( 'NONE', #141, #98 ) ;
+#81 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#82 = LINE ( 'NONE', #167, #69 ) ;
+#83 = AXIS2_PLACEMENT_3D ( 'NONE', #185, #106, #107 ) ;
+#84 = FACE_OUTER_BOUND ( 'NONE', #177, .T. ) ;
+#85 = LINE ( 'NONE', #138, #79 ) ;
+#86 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#87 = ORIENTED_EDGE ( 'NONE', *, *, #20, .T. ) ;
+#88 = VERTEX_POINT ( 'NONE', #150 ) ;
+#89 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#90 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #50 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #70, #76, #40 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#91 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #45 ) ;
+#92 = LINE ( 'NONE', #125, #127 ) ;
+#93 = STYLED_ITEM ( 'NONE', ( #116 ), #19 ) ;
+#94 = VERTEX_POINT ( 'NONE', #149 ) ;
+#95 = FACE_OUTER_BOUND ( 'NONE', #122, .T. ) ;
+#96 = ADVANCED_FACE ( 'NONE', ( #73 ), #121, .T. ) ;
+#97 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.387778780781445400E-016, 1.000000000000000000 ) ) ;
+#98 = VECTOR ( 'NONE', #146, 1000.000000000000000 ) ;
+#99 = EDGE_CURVE ( 'NONE', #199, #100, #68, .T. ) ;
+#100 = VERTEX_POINT ( 'NONE', #168 ) ;
+#101 = VECTOR ( 'NONE', #81, 1000.000000000000000 ) ;
+#102 = EDGE_CURVE ( 'NONE', #94, #186, #65, .T. ) ;
+#103 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #93 ) ) ;
+#104 = EDGE_CURVE ( 'NONE', #180, #94, #82, .T. ) ;
+#105 = PLANE ( 'NONE',  #83 ) ;
+#106 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#107 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#108 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#109 = SURFACE_STYLE_USAGE ( .BOTH. , #158 ) ;
+#110 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#111 = FILL_AREA_STYLE ('',( #9 ) ) ;
+#112 = ORIENTED_EDGE ( 'NONE', *, *, #114, .T. ) ;
+#113 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #93 ), #151 ) ;
+#114 = EDGE_CURVE ( 'NONE', #186, #100, #67, .T. ) ;
+#115 = AXIS2_PLACEMENT_3D ( 'NONE', #30, #89, #86 ) ;
+#116 = PRESENTATION_STYLE_ASSIGNMENT (( #109 ) ) ;
+#117 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#118 = VECTOR ( 'NONE', #97, 1000.000000000000000 ) ;
+#119 = PLANE ( 'NONE',  #178 ) ;
+#120 = CARTESIAN_POINT ( 'NONE',  ( 16.85058935189487200, -4.207926669749523900, 17.26530551925745600 ) ) ;
+#121 = PLANE ( 'NONE',  #198 ) ;
+#122 = EDGE_LOOP ( 'NONE', ( #166, #193, #8, #112 ) ) ;
+#123 = CARTESIAN_POINT ( 'NONE',  ( 16.85058935189487200, 5.792073330250476100, 17.26530551925745600 ) ) ;
+#124 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #128 ) ;
+#125 = CARTESIAN_POINT ( 'NONE',  ( 16.85058935189487200, -4.207926669749523900, 17.26530551925745600 ) ) ;
+#126 = LINE ( 'NONE', #194, #118 ) ;
+#127 = VECTOR ( 'NONE', #131, 1000.000000000000000 ) ;
+#128 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #139, #182 ) ;
+#129 = PRESENTATION_STYLE_ASSIGNMENT (( #71 ) ) ;
+#130 = EDGE_LOOP ( 'NONE', ( #162, #200, #41, #137 ) ) ;
+#131 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#132 = CARTESIAN_POINT ( 'NONE',  ( 11.85058935189486800, 5.792073330250472600, 42.26530551925746000 ) ) ;
+#133 = SURFACE_STYLE_FILL_AREA ( #111 ) ;
+#134 = EDGE_LOOP ( 'NONE', ( #7, #142, #159, #87 ) ) ;
+#135 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -1.387778780781445400E-016 ) ) ;
+#136 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.387778780781445400E-016, -1.000000000000000000 ) ) ;
+#137 = ORIENTED_EDGE ( 'NONE', *, *, #183, .T. ) ;
+#138 = CARTESIAN_POINT ( 'NONE',  ( 16.85058935189487200, -4.207926669749523900, 17.26530551925745600 ) ) ;
+#139 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #169, .NOT_KNOWN. ) ;
+#140 = CARTESIAN_POINT ( 'NONE',  ( 11.85058935189486800, 5.792073330250476100, 17.26530551925745600 ) ) ;
+#141 = CARTESIAN_POINT ( 'NONE',  ( 11.85058935189486800, -4.207926669749523900, 17.26530551925745600 ) ) ;
+#142 = ORIENTED_EDGE ( 'NONE', *, *, #183, .F. ) ;
+#143 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.387778780781445400E-016, -1.000000000000000000 ) ) ;
+#144 = AXIS2_PLACEMENT_3D ( 'NONE', #120, #74, #64 ) ;
+#145 = FACE_OUTER_BOUND ( 'NONE', #134, .T. ) ;
+#146 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#147 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #169 ) ) ;
+#148 = VERTEX_POINT ( 'NONE', #192 ) ;
+#149 = CARTESIAN_POINT ( 'NONE',  ( 16.85058935189487200, 5.792073330250472600, 42.26530551925746000 ) ) ;
+#150 = CARTESIAN_POINT ( 'NONE',  ( 16.85058935189487200, -4.207926669749523900, 17.26530551925745600 ) ) ;
+#151 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #196 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #110, #108, #117 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#152 = ADVANCED_FACE ( 'NONE', ( #57 ), #174, .F. ) ;
+#153 = ORIENTED_EDGE ( 'NONE', *, *, #47, .T. ) ;
+#154 = LINE ( 'NONE', #184, #101 ) ;
+#155 = CARTESIAN_POINT ( 'NONE',  ( 16.85058935189487200, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#156 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#157 = ADVANCED_FACE ( 'NONE', ( #58 ), #78, .F. ) ;
+#158 = SURFACE_SIDE_STYLE ('',( #133 ) ) ;
+#159 = ORIENTED_EDGE ( 'NONE', *, *, #104, .F. ) ;
+#160 = ORIENTED_EDGE ( 'NONE', *, *, #20, .F. ) ;
+#161 = ORIENTED_EDGE ( 'NONE', *, *, #11, .F. ) ;
+#162 = ORIENTED_EDGE ( 'NONE', *, *, #99, .T. ) ;
+#163 = ORIENTED_EDGE ( 'NONE', *, *, #99, .F. ) ;
+#164 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#165 = CARTESIAN_POINT ( 'NONE',  ( 16.85058935189487200, -4.207926669749527400, 42.26530551925746000 ) ) ;
+#166 = ORIENTED_EDGE ( 'NONE', *, *, #187, .T. ) ;
+#167 = CARTESIAN_POINT ( 'NONE',  ( 16.85058935189487200, 5.792073330250476100, 17.26530551925745600 ) ) ;
+#168 = CARTESIAN_POINT ( 'NONE',  ( 11.85058935189486800, -4.207926669749527400, 42.26530551925746000 ) ) ;
+#169 = PRODUCT ( 'TriggerGuard^StikM1', 'TriggerGuard^StikM1', '', ( #44 ) ) ;
+#170 = CARTESIAN_POINT ( 'NONE',  ( 11.85058935189486800, -4.207926669749527400, 42.26530551925746000 ) ) ;
+#171 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#172 = ORIENTED_EDGE ( 'NONE', *, *, #59, .T. ) ;
+#173 = ORIENTED_EDGE ( 'NONE', *, *, #187, .F. ) ;
+#174 = PLANE ( 'NONE',  #18 ) ;
+#175 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#176 = CARTESIAN_POINT ( 'NONE',  ( 16.85058935189487200, -4.207926669749527400, 42.26530551925746000 ) ) ;
+#177 = EDGE_LOOP ( 'NONE', ( #172, #160, #179, #75 ) ) ;
+#178 = AXIS2_PLACEMENT_3D ( 'NONE', #123, #135, #136 ) ;
+#179 = ORIENTED_EDGE ( 'NONE', *, *, #195, .F. ) ;
+#180 = VERTEX_POINT ( 'NONE', #13 ) ;
+#181 = ORIENTED_EDGE ( 'NONE', *, *, #104, .T. ) ;
+#182 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #45, 'design' ) ;
+#183 = EDGE_CURVE ( 'NONE', #94, #199, #46, .T. ) ;
+#184 = CARTESIAN_POINT ( 'NONE',  ( 16.85058935189487200, 5.792073330250476100, 17.26530551925745600 ) ) ;
+#185 = CARTESIAN_POINT ( 'NONE',  ( 16.85058935189487200, -4.207926669749523900, 17.26530551925745600 ) ) ;
+#186 = VERTEX_POINT ( 'NONE', #12 ) ;
+#187 = EDGE_CURVE ( 'NONE', #100, #148, #49, .T. ) ;
+#188 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#189 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.387778780781445400E-016, 1.000000000000000000 ) ) ;
+#190 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#191 = CARTESIAN_POINT ( 'NONE',  ( 16.85058935189487200, -4.207926669749527400, 42.26530551925746000 ) ) ;
+#192 = CARTESIAN_POINT ( 'NONE',  ( 11.85058935189486800, -4.207926669749523900, 17.26530551925745600 ) ) ;
+#193 = ORIENTED_EDGE ( 'NONE', *, *, #28, .F. ) ;
+#194 = CARTESIAN_POINT ( 'NONE',  ( 11.85058935189486800, 5.792073330250476100, 17.26530551925745600 ) ) ;
+#195 = EDGE_CURVE ( 'NONE', #88, #180, #51, .T. ) ;
+#196 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #110, 'distance_accuracy_value', 'NONE');
+#197 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#198 = AXIS2_PLACEMENT_3D ( 'NONE', #155, #156, #164 ) ;
+#199 = VERTEX_POINT ( 'NONE', #132 ) ;
+#200 = ORIENTED_EDGE ( 'NONE', *, *, #114, .F. ) ;
+#201 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#202 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+ENDSEC;
+END-ISO-10303-21;